sbin/dkscan_bsdlabel/dkscan_util.h

42

void aprint_error(const char *format, ...) __printflike(1, 2);

sys/arch/acorn32/mainbus/atppc_pioc.c

109

aprint_error(": attempt to map bus space failed, device not "

sys/arch/acorn32/podulebus/icside.c

219

aprint_error(": rev %d is unsupported\n", id);

sys/arch/algor/dev/com_mainbus.c

94

aprint_error(": can't map i/o space\n");

sys/arch/algor/dev/lpt_mainbus.c

86

aprint_error(": can't map i/o space\n");

sys/arch/alpha/alpha/cpu.c

360

aprint_error("%s", model);

sys/arch/alpha/jensenio/com_jensenio.c

100

aprint_error(": can't map i/o space\n");

sys/arch/alpha/jensenio/lpt_jensenio.c

101

aprint_error(": can't map i/o space\n");

sys/arch/alpha/jensenio/lpt_jensenio.c

117

aprint_error(" at %s", intrstr);

sys/arch/alpha/jensenio/lpt_jensenio.c

118

aprint_error("\n");

sys/arch/alpha/pci/dwlpx.c

324

aprint_error("\tHPC %d: ERR=0x%08x; DMA %s Memory, "

sys/arch/alpha/pci/dwlpx.c

329

aprint_error("\t PCI device asserted SERR_L\n");

sys/arch/alpha/pci/dwlpx.c

331

aprint_error("\t Incremental Latency Exceeded\n");

sys/arch/alpha/pci/dwlpx.c

333

aprint_error("\t CPU access of SG RAM Parity Error\n");

sys/arch/alpha/pci/dwlpx.c

335

aprint_error("\t Illegal CSR Address Error\n");

sys/arch/alpha/pci/dwlpx.c

337

aprint_error("\t Nonexistent PCI Address Error\n");

sys/arch/alpha/pci/dwlpx.c

339

aprint_error("\t PCI Target Disconnect Error\n");

sys/arch/alpha/pci/dwlpx.c

341

aprint_error("\t PCI Target Abort Error\n");

sys/arch/alpha/pci/dwlpx.c

343

aprint_error("\t PCI Write Parity Error\n");

sys/arch/alpha/pci/dwlpx.c

345

aprint_error("\t PCI Data Parity Error\n");

sys/arch/alpha/pci/dwlpx.c

347

aprint_error("\t PCI Address Parity Error\n");

sys/arch/alpha/pci/dwlpx.c

349

aprint_error("\t SG Map RAM Invalid Entry Error\n");

sys/arch/alpha/pci/dwlpx.c

351

aprint_error("\t DMA access of SG RAM Parity Error\n");

sys/arch/alpha/pci/dwlpx.c

353

aprint_error("\t DMA Read Return Parity Error\n");

sys/arch/alpha/pci/dwlpx.c

355

aprint_error("\t PCI Master Abort Error\n");

sys/arch/alpha/pci/dwlpx.c

357

aprint_error("\t CSR Parity Error\n");

sys/arch/alpha/pci/dwlpx.c

359

aprint_error("\t CSR Overrun Error\n");

sys/arch/alpha/pci/dwlpx.c

361

aprint_error("\t Mailbox Parity Error\n");

sys/arch/alpha/pci/dwlpx.c

363

aprint_error("\t Mailbox Illegal Length Error\n");

sys/arch/alpha/sableio/com_sableio.c

101

aprint_error(": can't map i/o space\n");

sys/arch/alpha/sableio/com_sableio.c

118

aprint_error(" at %s", intrstr);

sys/arch/alpha/sableio/com_sableio.c

119

aprint_error("\n");

sys/arch/alpha/sableio/fdc_sableio.c

122

aprint_error(" at %s", intrstr);

sys/arch/alpha/sableio/fdc_sableio.c

123

aprint_error("\n");

sys/arch/alpha/sableio/lpt_sableio.c

101

aprint_error(": can't map i/o space\n");

sys/arch/alpha/sableio/lpt_sableio.c

117

aprint_error(" at %s", intrstr);

sys/arch/alpha/sableio/lpt_sableio.c

118

aprint_error("\n");

sys/arch/alpha/sableio/pckbc_sableio.c

152

aprint_error(" at %s", intrstr);

sys/arch/alpha/sableio/pckbc_sableio.c

153

aprint_error("\n");

sys/arch/amiga/dev/zz9k.c

114

aprint_error("Failed to map MNT ZZ9000 registers.\n");

sys/arch/amiga/dev/zz9k.c

126

aprint_error("Firmware version is not supported. "

sys/arch/amiga/dev/zz9k.c

128

aprint_error(

sys/arch/amiga/dev/zz9k_ax.c

224

aprint_error(": Failed to map MNT ZZ9000AX audio tx buffer.\n");

sys/arch/amiga/dev/zz9k_fb.c

276

aprint_error(": Failed to map MNT ZZ9000 framebuffer.\n");

sys/arch/amiga/dev/zz9k_if.c

139

aprint_error(": Failed to map MNT ZZ9000 eth rx buffer.\n");

sys/arch/amiga/dev/zz9k_if.c

145

aprint_error(": Failed to map MNT ZZ9000 eth tx buffer.\n");

sys/arch/amiga/pci/empb_bsm.c

115

aprint_error("empb: can't find bridge device\n");

sys/arch/amiga/pci/empb_bsm.c

146

aprint_error("empb: linear space mapping might not work\n");

sys/arch/arc/jazz/asc.c

144

aprint_error(": unable to map I/O space\n");

sys/arch/arc/jazz/asc.c

150

aprint_error(": unable to map DMA I/O space\n");

sys/arch/arc/jazz/asc.c

156

aprint_error(": unable to create DMA map\n");

sys/arch/arc/jazz/com_jazzio.c

135

aprint_error(": can't map i/o space\n");

sys/arch/arc/jazz/fdc_jazzio.c

171

aprint_error(": unable to map I/O space\n");

sys/arch/arc/jazz/fdc_jazzio.c

177

aprint_error(": unable to subregion I/O space\n");

sys/arch/arc/jazz/fdc_jazzio.c

183

aprint_error(": unable to map DMA I/O space\n");

sys/arch/arc/jazz/fdc_jazzio.c

189

aprint_error(": unable to create DMA map\n");

sys/arch/arc/jazz/mcclock_jazzio.c

98

aprint_error(": unable to map I/O space\n");

sys/arch/arc/jazz/oosiop_jazzio.c

85

aprint_error(": failed to map registers\n");

sys/arch/arc/jazz/osiop_jazzio.c

83

aprint_error(": failed to map registers, err=%d\n", err);

sys/arch/arm/acpi/gic_acpi.c

101

aprint_error(": couldn't find GICC registers\n");

sys/arch/arm/acpi/gic_acpi.c

111

aprint_error(": couldn't map registers: %d\n", error);

sys/arch/arm/acpi/plcom_acpi.c

103

aprint_error(": couldn't find irq resource\n");

sys/arch/arm/acpi/plcom_acpi.c

125

aprint_error(": couldn't map registers\n");

sys/arch/arm/acpi/plcom_acpi.c

97

aprint_error(": couldn't find mem resource\n");

sys/arch/arm/altera/cycv_clkmgr.c

138

aprint_error(": couldn't get registers\n");

sys/arch/arm/altera/cycv_clkmgr.c

146

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d",

sys/arch/arm/altera/cycv_dwcmmc.c

103

aprint_error(": couldn't get clock biu\n");

sys/arch/arm/altera/cycv_dwcmmc.c

108

aprint_error(": couldn't get clock ciu\n");

sys/arch/arm/altera/cycv_dwcmmc.c

114

aprint_error(": couldn't enable clock biu: %d\n", error);

sys/arch/arm/altera/cycv_dwcmmc.c

119

aprint_error(": couldn't enable clock ciu: %d\n", error);

sys/arch/arm/altera/cycv_dwcmmc.c

128

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d\n",

sys/arch/arm/altera/cycv_dwcmmc.c

93

aprint_error(": couldn't get registers\n");

sys/arch/arm/altera/cycv_gmac.c

101

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/altera/cycv_gmac.c

107

aprint_error(": couldn't get clock\n");

sys/arch/arm/altera/cycv_gmac.c

113

aprint_error(": couldn't get reset\n");

sys/arch/arm/altera/cycv_gmac.c

119

aprint_error(": missing 'phy-mode' property\n");

sys/arch/arm/altera/cycv_gmac.c

124

aprint_error(": couldn't enable clocks\n");

sys/arch/arm/altera/cycv_gmac.c

129

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/altera/cycv_gmac.c

88

aprint_error(": couldn't get registers\n");

sys/arch/arm/altera/cycv_gmac.c

95

aprint_error(": couldn't map registers\n");

sys/arch/arm/altera/cycv_platform.c

127

aprint_error("cpu%d: WARNING: AP failed to start\n", 1);

sys/arch/arm/altera/cycv_rstmgr.c

76

aprint_error(": couldn't get registers\n");

sys/arch/arm/altera/cycv_rstmgr.c

84

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d",

sys/arch/arm/amlogic/meson6_timer.c

123

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/meson6_timer.c

130

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/meson6_timer.c

138

aprint_error(": failed to enable clock #%d\n", i);

sys/arch/arm/amlogic/meson8b_clkc.c

342

aprint_error(": couldn't get syscon registers\n");

sys/arch/arm/amlogic/meson_dwmac.c

207

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/meson_dwmac.c

215

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/meson_dwmac.c

221

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/amlogic/meson_dwmac.c

229

aprint_error(": couldn't get clocks\n");

sys/arch/arm/amlogic/meson_dwmac.c

237

aprint_error(": missing 'phy-mode' property\n");

sys/arch/arm/amlogic/meson_dwmac.c

252

aprint_error(": unsupported phy-mode '%s'\n", phy_mode);

sys/arch/arm/amlogic/meson_dwmac.c

257

aprint_error(": couldn't enable clock\n");

sys/arch/arm/amlogic/meson_dwmac.c

262

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/amlogic/meson_genfb.c

192

aprint_error(": couldn't get register #%d\n", i);

sys/arch/arm/amlogic/meson_genfb.c

203

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/meson_genfb.c

540

aprint_error(" [UNSUPPORTED HDMI VIC %d]", vic);

sys/arch/arm/amlogic/meson_pinctrl.c

450

aprint_error(": couldn't map mux registers\n");

sys/arch/arm/amlogic/meson_pinctrl.c

455

aprint_error(": couldn't map gpio registers\n");

sys/arch/arm/amlogic/meson_pinctrl.c

462

aprint_error(": couldn't map pull registers\n");

sys/arch/arm/amlogic/meson_pinctrl.c

469

aprint_error(": couldn't map pull-enable registers\n");

sys/arch/arm/amlogic/meson_pinctrl.c

481

aprint_error(": couldn't find gpio controller\n");

sys/arch/arm/amlogic/meson_pwm.c

349

aprint_error(": couldn't get clock\n");

sys/arch/arm/amlogic/meson_pwm.c

364

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/meson_pwm.c

368

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/meson_resets.c

134

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/meson_resets.c

141

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/meson_rng.c

82

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/meson_rng.c

89

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/meson_rng.c

96

aprint_error(": couldn't enable core clock\n");

sys/arch/arm/amlogic/meson_rtc.c

128

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/meson_rtc.c

135

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/meson_sdhc.c

185

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/meson_sdhc.c

190

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/amlogic/meson_sdhc.c

199

aprint_error(": failed to enable core/pclk clock\n");

sys/arch/arm/amlogic/meson_sdhc.c

208

aprint_error(": failed to get clkin/clkin2 clock\n");

sys/arch/arm/amlogic/meson_sdhc.c

216

aprint_error(": failed to map registers\n");

sys/arch/arm/amlogic/meson_sdhc.c

233

aprint_error(": couldn't get mmc slot\n");

sys/arch/arm/amlogic/meson_sdio.c

164

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/meson_sdio.c

169

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/amlogic/meson_sdio.c

175

aprint_error(": failed to enable core clock\n");

sys/arch/arm/amlogic/meson_sdio.c

181

aprint_error(": failed to get clkin clock\n");

sys/arch/arm/amlogic/meson_sdio.c

189

aprint_error(": failed to map registers\n");

sys/arch/arm/amlogic/meson_sdio.c

206

aprint_error(": couldn't get mmc slot\n");

sys/arch/arm/amlogic/meson_thermal.c

193

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/meson_thermal.c

197

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/meson_thermal.c

203

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/meson_thermal.c

207

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/meson_thermal.c

212

aprint_error(": couldn't enable clock\n");

sys/arch/arm/amlogic/meson_uart.c

174

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/meson_uart.c

183

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/meson_uart.c

188

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/amlogic/meson_uart.c

196

aprint_error(": failed to establish interrupt on %s\n",

sys/arch/arm/amlogic/meson_uart.c

203

aprint_error(": failed to establish softint\n");

sys/arch/arm/amlogic/meson_uart.c

213

aprint_error(": couldn't allocate major number\n");

sys/arch/arm/amlogic/meson_usbctrl.c

306

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/meson_usbctrl.c

310

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/meson_usbphy.c

211

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/meson_usbphy.c

215

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/meson_usbphy.c

222

aprint_error(": couldn't enable clock #%d\n", n);

sys/arch/arm/amlogic/meson_usbphy.c

228

aprint_error(": couldn't de-assert reset #%d\n", n);

sys/arch/arm/amlogic/meson_wdt.c

134

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/meson_wdt.c

141

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/mesong12_aoclkc.c

120

aprint_error(": couldn't get syscon registers\n");

sys/arch/arm/amlogic/mesong12_clkc.c

1521

aprint_error(": couldn't get syscon registers\n");

sys/arch/arm/amlogic/mesong12_usb2phy.c

307

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/mesong12_usb2phy.c

311

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/mesong12_usb2phy.c

317

aprint_error(": couldn't get clock\n");

sys/arch/arm/amlogic/mesong12_usb2phy.c

321

aprint_error(": couldn't enable clock\n");

sys/arch/arm/amlogic/mesong12_usb3pciephy.c

319

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/mesong12_usb3pciephy.c

323

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/mesong12_usb3pciephy.c

329

aprint_error(": couldn't get clock\n");

sys/arch/arm/amlogic/mesong12_usb3pciephy.c

333

aprint_error(": couldn't enable clock\n");

sys/arch/arm/amlogic/mesongx_mmc.c

298

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/mesongx_mmc.c

308

aprint_error(": couldn't get clocks\n");

sys/arch/arm/amlogic/mesongx_mmc.c

314

aprint_error(": couldn't get reset\n");

sys/arch/arm/amlogic/mesongx_mmc.c

321

aprint_error(": couldn't enable core clock\n");

sys/arch/arm/amlogic/mesongx_mmc.c

326

aprint_error(": couldn't enable clkin clocks\n");

sys/arch/arm/amlogic/mesongx_mmc.c

331

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/amlogic/mesongx_mmc.c

343

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/mesongx_wdt.c

138

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/mesongx_wdt.c

145

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/mesongxbb_aoclkc.c

95

aprint_error(": couldn't get syscon registers\n");

sys/arch/arm/amlogic/mesongxbb_clkc.c

246

aprint_error(": couldn't get syscon registers\n");

sys/arch/arm/amlogic/mesongxl_usb2phy.c

119

aprint_error(": couldn't enable supply\n");

sys/arch/arm/amlogic/mesongxl_usb2phy.c

159

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/mesongxl_usb2phy.c

163

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/mesongxl_usb2phy.c

169

aprint_error(": couldn't get clock\n");

sys/arch/arm/amlogic/mesongxl_usb2phy.c

176

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/amlogic/mesongxl_usb2phy.c

181

aprint_error(": couldn't enable clock\n");

sys/arch/arm/amlogic/mesongxl_usb3phy.c

171

aprint_error(": couldn't get registers\n");

sys/arch/arm/amlogic/mesongxl_usb3phy.c

175

aprint_error(": couldn't map registers\n");

sys/arch/arm/amlogic/mesongxl_usb3phy.c

181

aprint_error(": couldn't get phy clock\n");

sys/arch/arm/amlogic/mesongxl_usb3phy.c

187

aprint_error(": couldn't get peripheral clock\n");

sys/arch/arm/amlogic/mesongxl_usb3phy.c

194

aprint_error(": couldn't de-assert reset #%d\n", n);

sys/arch/arm/amlogic/mesongxl_usb3phy.c

199

aprint_error(": couldn't enable phy clock\n");

sys/arch/arm/amlogic/mesongxl_usb3phy.c

204

aprint_error(": couldn't enable peripheral clock\n");

sys/arch/arm/amlogic/mesongxl_usb3phy.c

212

aprint_error(": couldn't enable supply\n");

sys/arch/arm/apple/apple_dart.c

549

aprint_error(": couldn't get registers\n");

sys/arch/arm/apple/apple_dart.c

553

aprint_error(": couldn't decode interrupt\n");

sys/arch/arm/apple/apple_dart.c

562

aprint_error(": couldn't map registers\n");

sys/arch/arm/apple/apple_iic.c

198

aprint_error(": unable to get device registers\n");

sys/arch/arm/apple/apple_iic.c

205

aprint_error(": couldn't acquire clock\n");

sys/arch/arm/apple/apple_iic.c

210

aprint_error(": failed to enable clock\n");

sys/arch/arm/apple/apple_iic.c

223

aprint_error(": unable to map device\n");

sys/arch/arm/apple/apple_intc.c

458

aprint_error(": couldn't get registers\n");

sys/arch/arm/apple/apple_intc.c

465

aprint_error(": couldn't map registers\n");

sys/arch/arm/apple/apple_mbox.c

234

aprint_error(": couldn't get registers\n");

sys/arch/arm/apple/apple_mbox.c

243

aprint_error(": couldn't map registers\n");

sys/arch/arm/apple/apple_nvme.c

288

aprint_error(": couldn't decode interrupt\n");

sys/arch/arm/apple/apple_nvme.c

383

aprint_error(": couldn't get NVME registers\n");

sys/arch/arm/apple/apple_nvme.c

388

aprint_error(": couldn't get ANS registers\n");

sys/arch/arm/apple/apple_nvme.c

397

aprint_error(": couldn't map NVME registers\n");

sys/arch/arm/apple/apple_nvme.c

402

aprint_error(": couldn't map ANS registers\n");

sys/arch/arm/apple/apple_nvme.c

422

aprint_error("can't map mailbox channel\n");

sys/arch/arm/apple/apple_nvme.c

436

aprint_error("firmware not ready\n");

sys/arch/arm/apple/apple_pcie.c

155

aprint_error(": couldn't get port number\n");

sys/arch/arm/apple/apple_pcie.c

162

aprint_error(": couldn't get %s regs\n", regname);

sys/arch/arm/apple/apple_pcie.c

167

aprint_error(": couldn't map %s regs\n", regname);

sys/arch/arm/apple/apple_pcie.c

319

aprint_error(": couldn't get registers (%s)\n", "config");

sys/arch/arm/apple/apple_pcie.c

324

aprint_error(": couldn't get registers (%s)\n", "rc");

sys/arch/arm/apple/apple_pcie.c

339

aprint_error(": couldn't map registers (%s): %d\n", "config",

sys/arch/arm/apple/apple_pcie.c

346

aprint_error(": couldn't map registers (%s): %d\n", "rc",

sys/arch/arm/apple/apple_pinctrl.c

261

aprint_error(": couldn't get registers\n");

sys/arch/arm/apple/apple_pinctrl.c

269

aprint_error(": couldn't map registers\n");

sys/arch/arm/apple/apple_pinctrl.c

274

aprint_error(": couldn't get number of pins\n");

sys/arch/arm/apple/apple_pinctrl.c

279

aprint_error(": no gpio controller");

sys/arch/arm/apple/apple_pmgr.c

121

aprint_error(": couldn't get registers\n");

sys/arch/arm/apple/apple_pmgr.c

131

aprint_error(": couldn't map registers: %d\n", error);

sys/arch/arm/apple/apple_pmgr.c

81

aprint_error(": invalid 'reg' property\n");

sys/arch/arm/apple/apple_smc.c

321

aprint_error(": couldn't get registers\n");

sys/arch/arm/apple/apple_smc.c

328

aprint_error(": couldn't map registers\n");

sys/arch/arm/apple/apple_smc.c

337

aprint_error(": can't map mailbox channel\n");

sys/arch/arm/apple/apple_smc.c

343

aprint_error(": can't boot firmware\n");

sys/arch/arm/apple/apple_smc.c

349

aprint_error(": can't start SMC endpoint\n");

sys/arch/arm/apple/apple_smc.c

356

aprint_error(": can't get SRAM address\n");

sys/arch/arm/apple/apple_smc.c

362

aprint_error(": can't map SRAM\n");

sys/arch/arm/apple/apple_wdog.c

104

aprint_error(": couldn't map registers\n");

sys/arch/arm/apple/apple_wdog.c

97

aprint_error(": couldn't get registers\n");

sys/arch/arm/arm/efi_runtime.c

81

aprint_error("%s: can't allocate VA\n", __func__);

sys/arch/arm/arm/efi_runtime.c

93

aprint_error("EFI: signature mismatch (%#" PRIx64 " != %#"

sys/arch/arm/arm32/cpu.c

693

aprint_error("Processor failed probe - no CPU ID\n");

sys/arch/arm/at91/at91spi.c

154

aprint_error("%s: no slaves!\n", device_xname(sc->sc_dev));

sys/arch/arm/at91/at91spi.c

214

aprint_error("%s: speed %d not supported\n",

sys/arch/arm/broadcom/bcm2835_aux.c

123

aprint_error(": couldn't get registers\n");

sys/arch/arm/broadcom/bcm2835_aux.c

133

aprint_error(": couldn't get parent clock\n");

sys/arch/arm/broadcom/bcm2835_aux.c

138

aprint_error(": couldn't map registers\n");

sys/arch/arm/broadcom/bcm2835_bsc_fdt.c

107

aprint_error(": unable to map device\n");

sys/arch/arm/broadcom/bcm2835_bsc_fdt.c

83

aprint_error(": unable to get device registers\n");

sys/arch/arm/broadcom/bcm2835_bsc_fdt.c

90

aprint_error(": couldn't acquire clock\n");

sys/arch/arm/broadcom/bcm2835_bsc_fdt.c

95

aprint_error(": failed to enable clock\n");

sys/arch/arm/broadcom/bcm2835_cm.c

102

aprint_error(": missing 'reg' property\n");

sys/arch/arm/broadcom/bcm2835_com.c

116

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/broadcom/bcm2835_com.c

91

aprint_error(": can't map device\n");

sys/arch/arm/broadcom/bcm2835_com.c

99

aprint_error(": failed to enable clock #%d\n", i);

sys/arch/arm/broadcom/bcm2835_dmac.c

132

aprint_error(": missing 'reg' property\n");

sys/arch/arm/broadcom/bcm2835_dmac.c

137

aprint_error(": unable to map device\n");

sys/arch/arm/broadcom/bcm2835_dmac.c

234

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/broadcom/bcm2835_dwctwo.c

130

aprint_error(": couldn't get registers\n");

sys/arch/arm/broadcom/bcm2835_dwctwo.c

142

aprint_error(": couldn't map device\n");

sys/arch/arm/broadcom/bcm2835_dwctwo.c

148

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/broadcom/bcm2835_emmc.c

151

aprint_error(": failed to enable clock #%d\n", i);

sys/arch/arm/broadcom/bcm2835_emmc.c

172

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/broadcom/bcm2835_gpio.c

272

aprint_error(": couldn't get registers\n");

sys/arch/arm/broadcom/bcm2835_intr.c

337

aprint_error(": couldn't get registers\n");

sys/arch/arm/broadcom/bcm2835_intr.c

345

aprint_error(": couldn't map device\n");

sys/arch/arm/broadcom/bcm2835_intr.c

407

aprint_error(": couldn't register with fdtbus: %d\n", error);

sys/arch/arm/broadcom/bcm2835_mbox.c

72

aprint_error("bcmmbox_intr: chan %d overflow\n",chan);

sys/arch/arm/broadcom/bcm2835_mbox_fdt.c

85

aprint_error(": couldn't get register address\n");

sys/arch/arm/broadcom/bcm2835_mbox_fdt.c

95

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/broadcom/bcm2835_pmwdog.c

138

aprint_error(": couldn't get register address\n");

sys/arch/arm/broadcom/bcm2835_pwm.c

118

aprint_error(": failed to get registers\n");

sys/arch/arm/broadcom/bcm2835_pwm.c

130

aprint_error(": couldn't get clk\n");

sys/arch/arm/broadcom/bcm2835_pwm.c

136

aprint_error(": couldn't enable clk\n");

sys/arch/arm/broadcom/bcm2835_sdhost.c

205

aprint_error(": missing 'reg' property\n");

sys/arch/arm/broadcom/bcm2835_sdhost.c

215

aprint_error(": couldn't map registers\n");

sys/arch/arm/broadcom/bcm2835_sdhost.c

226

aprint_error(": failed to enable clock #%d\n", i);

sys/arch/arm/broadcom/bcm2835_sdhost.c

242

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/broadcom/bcm2835_spi.c

111

aprint_error(": missing 'reg' property\n");

sys/arch/arm/broadcom/bcm2835_spi.c

122

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/broadcom/bcm2835_tmr.c

137

aprint_error(": missing 'reg' property\n");

sys/arch/arm/broadcom/bcm2835_tmr.c

148

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/broadcom/bcm2835_tmr.c

155

aprint_error(": failed to establish interrupt on %s\n",

sys/arch/arm/broadcom/bcm2835_vcaudio.c

221

aprint_error(": couldn't create thread (%d)\n", error);

sys/arch/arm/broadcom/bcm2838_pcie.c

326

aprint_error("%s: missing 'ranges' property\n", sc->sc_name);

sys/arch/arm/broadcom/bcm2838_pcie.c

344

aprint_error("%s: too many IO ranges\n", sc->sc_name);

sys/arch/arm/broadcom/bcm2838_pcie.c

361

aprint_error("%s: too many mem ranges\n", sc->sc_name);

sys/arch/arm/broadcom/bcm53xx_eth.c

291

aprint_error(": mac-address property is missing\n");

sys/arch/arm/broadcom/bcm53xx_eth.c

312

aprint_error(": failed to init rxq: %d\n", error);

sys/arch/arm/broadcom/bcm53xx_eth.c

318

aprint_error(": failed to init txq: %d\n", error);

sys/arch/arm/broadcom/bcm53xx_eth.c

325

aprint_error(": failed to allocate rx dmamaps: %d\n", error);

sys/arch/arm/broadcom/bcm53xx_eth.c

332

aprint_error(": failed to allocate tx dmamaps: %d\n", error);

sys/arch/arm/broadcom/bcm53xx_eth.c

339

aprint_error(": failed to create workqueue: %d\n", error);

sys/arch/arm/cortex/a9wdt.c

258

aprint_error("%s: unable to register with sysmon\n",

sys/arch/arm/fdt/a9ptmr_fdt.c

104

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/fdt/a9ptmr_fdt.c

127

aprint_error(": couldn't get registers\n");

sys/arch/arm/fdt/a9ptmr_fdt.c

131

aprint_error(": couldn't map registers\n");

sys/arch/arm/fdt/a9ptmr_fdt.c

90

aprint_error(": couldn't get clock\n");

sys/arch/arm/fdt/a9ptmr_fdt.c

94

aprint_error(": couldn't enable clock\n");

sys/arch/arm/fdt/a9tmr_fdt.c

104

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/fdt/a9tmr_fdt.c

127

aprint_error(": couldn't get distributor address\n");

sys/arch/arm/fdt/a9tmr_fdt.c

131

aprint_error(": couldn't map registers\n");

sys/arch/arm/fdt/a9tmr_fdt.c

90

aprint_error(": couldn't get clock\n");

sys/arch/arm/fdt/a9tmr_fdt.c

94

aprint_error(": couldn't enable clock\n");

sys/arch/arm/fdt/a9wdt_fdt.c

106

aprint_error(": couldn't get registers\n");

sys/arch/arm/fdt/a9wdt_fdt.c

110

aprint_error(": couldn't map registers\n");

sys/arch/arm/fdt/a9wdt_fdt.c

96

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/fdt/aaci_fdt.c

74

aprint_error(": missing 'reg' property\n");

sys/arch/arm/fdt/aaci_fdt.c

85

aprint_error(": couldn't enable clock #%d\n", i);

sys/arch/arm/fdt/aaci_fdt.c

92

aprint_error(": couldn't map device\n");

sys/arch/arm/fdt/cpu_fdt.c

151

aprint_error("%s: no /cpus node found\n", __func__);

sys/arch/arm/fdt/cpu_fdt.c

230

aprint_error("%s: no /cpus node found\n", __func__);

sys/arch/arm/fdt/cpu_fdt.c

259

aprint_error("%s: failed to enable CPU %#" PRIx64 "\n",

sys/arch/arm/fdt/cpu_fdt.c

275

aprint_error("cpu%d: WARNING: AP failed to start\n", cpuindex);

sys/arch/arm/fdt/cpu_fdt.c

335

aprint_error("%s: devmap for cpu-release-addr"

sys/arch/arm/fdt/gic_fdt.c

152

aprint_error(": couldn't register with fdtbus: %d\n", error);

sys/arch/arm/fdt/gic_fdt.c

160

aprint_error(": couldn't get distributor address\n");

sys/arch/arm/fdt/gic_fdt.c

164

aprint_error(": couldn't get cpu interface address\n");

sys/arch/arm/fdt/gic_fdt.c

174

aprint_error(": couldn't map registers: %d\n", error);

sys/arch/arm/fdt/gicv3_fdt.c

143

aprint_error(": couldn't register with fdtbus: %d\n", error);

sys/arch/arm/fdt/gtmr_fdt.c

90

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/fdt/l2cc_fdt.c

72

aprint_error(": couldn't get distributor address\n");

sys/arch/arm/fdt/l2cc_fdt.c

76

aprint_error(": couldn't map registers\n");

sys/arch/arm/fdt/pcihost_fdt.c

128

aprint_error(": couldn't get registers\n");

sys/arch/arm/fdt/pcihost_fdt.c

140

aprint_error(": couldn't map registers: %d\n", error);

sys/arch/arm/fdt/plcom_fdt.c

112

aprint_error(": couldn't map device\n");

sys/arch/arm/fdt/plcom_fdt.c

79

aprint_error(": missing 'reg' property\n");

sys/arch/arm/fdt/plcom_fdt.c

84

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/fdt/plcom_fdt.c

93

aprint_error(": failed to enable clock #%d\n", i);

sys/arch/arm/fdt/plfb_fdt.c

139

aprint_error(": couldn't enable clock #%d\n", i);

sys/arch/arm/fdt/plfb_fdt.c

145

aprint_error(": missing 'reg' property\n");

sys/arch/arm/fdt/plfb_fdt.c

149

aprint_error(": couldn't map device\n");

sys/arch/arm/fdt/plfb_fdt.c

160

aprint_error(": missing 'memory-region' property\n");

sys/arch/arm/fdt/plfb_fdt.c

165

aprint_error(": missing 'reg' property on memory-region\n");

sys/arch/arm/fdt/plfb_fdt.c

170

aprint_error(": couldn't map vram\n");

sys/arch/arm/fdt/plkmi_fdt.c

74

aprint_error(": missing 'reg' property\n");

sys/arch/arm/fdt/plkmi_fdt.c

86

aprint_error(": couldn't enable clock #%d\n", i);

sys/arch/arm/fdt/plkmi_fdt.c

93

aprint_error(": couldn't map device\n");

sys/arch/arm/fdt/plmmc_fdt.c

101

aprint_error(": couldn't map device\n");

sys/arch/arm/fdt/plmmc_fdt.c

75

aprint_error(": missing 'reg' property\n");

sys/arch/arm/fdt/plmmc_fdt.c

81

aprint_error(": couldn't get clock\n");

sys/arch/arm/fdt/plmmc_fdt.c

86

aprint_error(": couldn't enable clock\n");

sys/arch/arm/fdt/plmmc_fdt.c

92

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/fdt/plrtc_fdt.c

71

aprint_error(": missing 'reg' property\n");

sys/arch/arm/fdt/plrtc_fdt.c

78

aprint_error(": couldn't map device\n");

sys/arch/arm/fdt/psci_fdt.c

116

aprint_error("PSCI: missing required property on /psci\n");

sys/arch/arm/fdt/psci_fdt.c

125

aprint_error("PSCI: unsupported method '%s'\n", method);

sys/arch/arm/fdt/psci_fdt.c

149

aprint_error("PSCI: no /psci node found\n");

sys/arch/arm/fdt/psci_fdt.c

160

aprint_error("PSCI: reset failed\n");

sys/arch/arm/fdt/smsh_fdt.c

81

aprint_error(": missing 'reg' property\n");

sys/arch/arm/fdt/smsh_fdt.c

93

aprint_error(": couldn't map device\n");

sys/arch/arm/footbridge/isa/dsrtc.c

227

aprint_error(": cannot map I/O space\n");

sys/arch/arm/footbridge/isa/dsrtc.c

235

aprint_error(": lithium cell is dead, RTC unreliable");

sys/arch/arm/gemini/gemini_gmac.c

261

aprint_error(": error mapping registers: %d", error);

sys/arch/arm/gemini/gemini_gmac.c

723

aprint_error("gmac0: "

sys/arch/arm/gemini/gemini_gpio.c

360

aprint_error(": failed to map register %#lx@%#lx: %d\n",

sys/arch/arm/gemini/gemini_obio.c

194

aprint_error("cannot map PCI controller at %#x\n",

sys/arch/arm/gemini/obio_ehci.c

113

aprint_error("%s: can't map memory space\n", devname);

sys/arch/arm/gemini/obio_ehci.c

135

aprint_error("%s: init failed, error=%d\n", devname, err);

sys/arch/arm/gemini/obio_wdc.c

115

aprint_error(": couldn't map registers\n");

sys/arch/arm/gemini/obio_wdc.c

122

aprint_error(": couldn't subregion registers\n");

sys/arch/arm/gemini/obio_wdc.c

129

aprint_error(": couldn't subregion registers\n");

sys/arch/arm/gemini/obio_wdt.c

102

aprint_error("%s: unable to register with sysmon\n",

sys/arch/arm/imx/imx23_apbdma.c

460

aprint_error(": couldn't get register address\n");

sys/arch/arm/imx/imx23_apbdma.c

464

aprint_error(": couldn't map registers\n");

sys/arch/arm/imx/imx23_apbdma.c

491

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/imx/imx23_clkctrl.c

90

aprint_error(": couldn't get register address\n");

sys/arch/arm/imx/imx23_clkctrl.c

94

aprint_error(": couldn't map registers\n");

sys/arch/arm/imx/imx23_digctl.c

101

aprint_error(": couldn't map registers\n");

sys/arch/arm/imx/imx23_digctl.c

97

aprint_error(": couldn't get register address\n");

sys/arch/arm/imx/imx23_digfilt.c

190

aprint_error(": couldn't get register address\n");

sys/arch/arm/imx/imx23_digfilt.c

195

aprint_error(": couldn't map registers\n");

sys/arch/arm/imx/imx23_digfilt.c

209

aprint_error(": couldn't get dma access\n");

sys/arch/arm/imx/imx23_digfilt.c

263

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/imx/imx23_icoll.c

340

aprint_error(": couldn't get register address\n");

sys/arch/arm/imx/imx23_icoll.c

344

aprint_error(": couldn't map registers\n");

sys/arch/arm/imx/imx23_icoll.c

354

aprint_error(

sys/arch/arm/imx/imx23_mmc.c

191

aprint_error(": couldn't get register address\n");

sys/arch/arm/imx/imx23_mmc.c

195

aprint_error(": couldn't map registers\n");

sys/arch/arm/imx/imx23_mmc.c

209

aprint_error(": couldn't map registers\n");

sys/arch/arm/imx/imx23_mmc.c

215

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/imx/imx23_pinctrl.c

475

aprint_error(": couldn't get register address\n");

sys/arch/arm/imx/imx23_pinctrl.c

479

aprint_error(": couldn't map registers\n");

sys/arch/arm/imx/imx23_pinctrl.c

517

aprint_error(": couldn't get register address\n");

sys/arch/arm/imx/imx23_pinctrl.c

522

aprint_error(": bank %ld out of range", gpio_instance);

sys/arch/arm/imx/imx23_rtc.c

91

aprint_error(": couldn't get register address\n");

sys/arch/arm/imx/imx23_rtc.c

95

aprint_error(": couldn't map registers\n");

sys/arch/arm/imx/imx23_timrot.c

120

aprint_error(": couldn't get register address\n");

sys/arch/arm/imx/imx23_timrot.c

124

aprint_error(": couldn't map registers\n");

sys/arch/arm/imx/imx23_timrot.c

133

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/imx/imx23_timrot.c

148

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/imx/imx23_usbc.c

100

aprint_error(": couldn't map registers\n");

sys/arch/arm/imx/imx23_usbc.c

108

aprint_error(": couldn't get vbus regulator\n");

sys/arch/arm/imx/imx23_usbc.c

95

aprint_error(": couldn't get register address\n");

sys/arch/arm/imx/imx23_usbphy.c

93

aprint_error(": couldn't get register address\n");

sys/arch/arm/imx/imx23_usbphy.c

97

aprint_error(": couldn't map registers\n");

sys/arch/arm/imx/imx31_gpio.c

348

aprint_error(": failed to map register %#lx@%#lx: %d\n",

sys/arch/arm/imx/imx51_ccm.c

110

aprint_error(": can't map registers\n");

sys/arch/arm/imx/imx51_ccm.c

117

aprint_error(": can't map pll registers\n");

sys/arch/arm/imx/imx51_gpio.c

113

aprint_error(": failed to map register %#lx@%#lx: %d\n",

sys/arch/arm/imx/imx51_iomux.c

97

aprint_error(": failed to map register %#lx@%#lx: %d\n",

sys/arch/arm/imx/imx_pcic.c

371

aprint_error("%s: can't attach\n", device_xname(sc->sc_dev));

sys/arch/arm/imx/imx_pcic.c

377

aprint_error("%s: failed to map MEMCTL\n", device_xname(sc->sc_dev));

sys/arch/arm/imx/imxpwm.c

158

aprint_error(": couldn't enable clk\n");

sys/arch/arm/iomd/vidcaudio.c

232

aprint_error("vidcaudio: Unknown IOMD id=%04x", id);

sys/arch/arm/iomd/vidcaudio.c

258

aprint_error(": strange IOMD\n");

sys/arch/arm/iomd/vidcaudio.c

277

aprint_error("%s: couldn't claim IRQ %d\n",

sys/arch/arm/marvell/mvsoc.c

1311

aprint_error("unknown ATTR: 0x%x", attr);

sys/arch/arm/marvell/mvsoc.c

1358

aprint_error("unknown ATTR: 0x%x", attr);

sys/arch/arm/marvell/mvsoc.c

1402

aprint_error("unknown TAG: 0x%x", tag);

sys/arch/arm/nvidia/soc_tegra124.c

92

aprint_error("cpu%d: WARNING: AP failed to start\n",

sys/arch/arm/nvidia/tegra124_car.c

754

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra124_car.c

762

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra124_cpu.c

225

aprint_error("tegra124: unknown SKU ID %#x\n", sku_id);

sys/arch/arm/nvidia/tegra124_xusbpad.c

104

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra124_xusbpad.c

184

aprint_error("%s: xusbpad driver not loaded\n", __func__);

sys/arch/arm/nvidia/tegra124_xusbpad.c

96

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra210_car.c

768

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra210_car.c

776

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra210_xusbpad.c

1004

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra210_xusbpad.c

990

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra210_xusbpad.c

995

aprint_error(": couldn't get reset padctl\n");

sys/arch/arm/nvidia/tegra_ahcisata.c

139

aprint_error(": couldn't get ahci registers\n");

sys/arch/arm/nvidia/tegra_ahcisata.c

143

aprint_error(": couldn't get sata registers\n");

sys/arch/arm/nvidia/tegra_ahcisata.c

148

aprint_error(": couldn't get clock sata\n");

sys/arch/arm/nvidia/tegra_ahcisata.c

153

aprint_error(": couldn't get clock sata-oob\n");

sys/arch/arm/nvidia/tegra_ahcisata.c

158

aprint_error(": couldn't get reset sata\n");

sys/arch/arm/nvidia/tegra_ahcisata.c

163

aprint_error(": couldn't get reset sata-oob\n");

sys/arch/arm/nvidia/tegra_ahcisata.c

168

aprint_error(": couldn't get reset sata-cold\n");

sys/arch/arm/nvidia/tegra_ahcisata.c

176

aprint_error(": couldn't get clock cml1\n");

sys/arch/arm/nvidia/tegra_ahcisata.c

181

aprint_error(": couldn't get clock pll_e\n");

sys/arch/arm/nvidia/tegra_ahcisata.c

189

aprint_error(": couldn't map sata registers: %d\n", error);

sys/arch/arm/nvidia/tegra_ahcisata.c

201

aprint_error(": couldn't map ahci registers: %d\n", error);

sys/arch/arm/nvidia/tegra_apbdma.c

122

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_apbdma.c

128

aprint_error(": couldn't get clock\n");

sys/arch/arm/nvidia/tegra_apbdma.c

133

aprint_error(": couldn't get reset dma\n");

sys/arch/arm/nvidia/tegra_apbdma.c

140

aprint_error(": couldn't enable clock dma: %d\n", error);

sys/arch/arm/nvidia/tegra_apbdma.c

150

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_cec.c

140

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_cec.c

145

aprint_error(": couldn't get clock cec\n");

sys/arch/arm/nvidia/tegra_cec.c

150

aprint_error(": couldn't get reset cec\n");

sys/arch/arm/nvidia/tegra_cec.c

158

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_com.c

111

aprint_error(": couldn't get frequency\n");

sys/arch/arm/nvidia/tegra_com.c

120

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_com.c

96

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_cpufreq.c

129

aprint_error("cpufreq: couldn't create sysctl nodes (%d)\n", error);

sys/arch/arm/nvidia/tegra_ehci.c

106

aprint_error(": couldn't map USB\n");

sys/arch/arm/nvidia/tegra_ehci.c

99

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_fuse.c

103

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_fuse.c

85

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_fuse.c

90

aprint_error(": couldn't get clock fuse\n");

sys/arch/arm/nvidia/tegra_fuse.c

95

aprint_error(": couldn't get reset fuse\n");

sys/arch/arm/nvidia/tegra_gpio.c

174

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_gpio.c

182

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_hdaudio.c

111

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_hdaudio.c

116

aprint_error(": couldn't get clock hda\n");

sys/arch/arm/nvidia/tegra_hdaudio.c

121

aprint_error(": couldn't get clock hda2hdmi\n");

sys/arch/arm/nvidia/tegra_hdaudio.c

126

aprint_error(": couldn't get clock hda2codec_2x\n");

sys/arch/arm/nvidia/tegra_hdaudio.c

131

aprint_error(": couldn't get reset hda\n");

sys/arch/arm/nvidia/tegra_hdaudio.c

136

aprint_error(": couldn't get reset hda2hdmi\n");

sys/arch/arm/nvidia/tegra_hdaudio.c

141

aprint_error(": couldn't get reset hda2codec_2x\n");

sys/arch/arm/nvidia/tegra_hdaudio.c

149

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_i2c.c

113

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_i2c.c

118

aprint_error(": couldn't get clock div-clk\n");

sys/arch/arm/nvidia/tegra_i2c.c

123

aprint_error(": couldn't get reset i2c\n");

sys/arch/arm/nvidia/tegra_i2c.c

132

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d",

sys/arch/arm/nvidia/tegra_lic.c

103

aprint_error(": couldn't register with fdtbus: %d\n", error);

sys/arch/arm/nvidia/tegra_mc.c

103

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_mc.c

95

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_nouveau.c

154

aprint_error(": couldn't get clock gpu\n");

sys/arch/arm/nvidia/tegra_nouveau.c

159

aprint_error(": couldn't get clock pwr\n");

sys/arch/arm/nvidia/tegra_nouveau.c

164

aprint_error(": couldn't get reset gpu\n");

sys/arch/arm/nvidia/tegra_nouveau.c

219

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_pcie.c

167

aprint_error(": couldn't get afi registers\n");

sys/arch/arm/nvidia/tegra_pcie.c

171

aprint_error(": couldn't get pads registers\n");

sys/arch/arm/nvidia/tegra_pcie.c

176

aprint_error(": couldn't get cs registers\n");

sys/arch/arm/nvidia/tegra_pcie.c

191

aprint_error(": couldn't map afi registers: %d\n", error);

sys/arch/arm/nvidia/tegra_pcie.c

197

aprint_error(": couldn't map pads registers: %d\n", error);

sys/arch/arm/nvidia/tegra_pcie.c

203

aprint_error(": couldn't map cs registers: %d\n", error);

sys/arch/arm/nvidia/tegra_pinmux.c

119

aprint_error("%s: pin %s does not support function %s\n",

sys/arch/arm/nvidia/tegra_pinmux.c

271

aprint_error(": couldn't get resource %d: %d\n", res, error);

sys/arch/arm/nvidia/tegra_pinmux.c

276

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_pmc.c

83

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_pmc.c

91

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_rtc.c

103

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_rtc.c

95

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_sdhc.c

107

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_sdhc.c

121

aprint_error(": couldn't create DMA tag: %d\n", error);

sys/arch/arm/nvidia/tegra_sdhc.c

142

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_sdhc.c

191

aprint_error(": couldn't get clock\n");

sys/arch/arm/nvidia/tegra_sdhc.c

196

aprint_error(": couldn't get reset\n");

sys/arch/arm/nvidia/tegra_sdhc.c

207

aprint_error(": couldn't set frequency: %d\n", error);

sys/arch/arm/nvidia/tegra_sdhc.c

212

aprint_error(": couldn't enable clock: %d\n", error);

sys/arch/arm/nvidia/tegra_soctherm.c

188

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_soctherm.c

193

aprint_error(": couldn't get clock tsensor\n");

sys/arch/arm/nvidia/tegra_soctherm.c

198

aprint_error(": couldn't get clock soctherm\n");

sys/arch/arm/nvidia/tegra_soctherm.c

203

aprint_error(": couldn't get reset soctherm\n");

sys/arch/arm/nvidia/tegra_soctherm.c

211

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_timer.c

107

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_timer.c

99

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_usbphy.c

106

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_usbphy.c

111

aprint_error(": couldn't get clock reg\n");

sys/arch/arm/nvidia/tegra_usbphy.c

116

aprint_error(": couldn't get clock pll_u\n");

sys/arch/arm/nvidia/tegra_usbphy.c

121

aprint_error(": couldn't get clock utmi-pads\n");

sys/arch/arm/nvidia/tegra_usbphy.c

126

aprint_error(": couldn't get reset usb\n");

sys/arch/arm/nvidia/tegra_usbphy.c

131

aprint_error(": couldn't get reset utmi-pads\n");

sys/arch/arm/nvidia/tegra_usbphy.c

140

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_xusb.c

236

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_xusb.c

241

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_xusb.c

248

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_xusb.c

253

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_xusb.c

259

aprint_error(": couldn't get registers\n");

sys/arch/arm/nvidia/tegra_xusb.c

264

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nvidia/tegra_xusbpad.c

59

aprint_error("%s: could not enable SATA\n", __func__);

sys/arch/arm/nvidia/tegra_xusbpad.c

69

aprint_error("%s: could not enable XHCI\n", __func__);

sys/arch/arm/nxp/if_enet_imx.c

103

aprint_error(": couldn't get clock ahb\n");

sys/arch/arm/nxp/if_enet_imx.c

108

aprint_error(": couldn't get clock ptp\n");

sys/arch/arm/nxp/if_enet_imx.c

113

aprint_error(": couldn't enable clock enet_clk_ref\n");

sys/arch/arm/nxp/if_enet_imx.c

117

aprint_error(": couldn't enable clock enet_out\n");

sys/arch/arm/nxp/if_enet_imx.c

135

aprint_error(": missing 'phy-mode' property\n");

sys/arch/arm/nxp/if_enet_imx.c

86

aprint_error(": couldn't get enet registers\n");

sys/arch/arm/nxp/if_enet_imx.c

92

aprint_error(": couldn't map enet registers: %d\n", error);

sys/arch/arm/nxp/if_enet_imx.c

98

aprint_error(": couldn't get clock ipg\n");

sys/arch/arm/nxp/imx6_clk.c

1255

aprint_error(": couldn't get registers\n");

sys/arch/arm/nxp/imx6_clk.c

1263

aprint_error(": can't map ccm registers\n");

sys/arch/arm/nxp/imx6_clk.c

1270

aprint_error(": can't find anatop device\n");

sys/arch/arm/nxp/imx6_clk.c

1275

aprint_error(": can't get anatop registers\n");

sys/arch/arm/nxp/imx6_clk.c

1281

aprint_error(": can't map anatop registers\n");

sys/arch/arm/nxp/imx6_dwhdmi.c

229

aprint_error(": couldn't get registers\n");

sys/arch/arm/nxp/imx6_dwhdmi.c

235

aprint_error(": couldn't enable iahb clock\n");

sys/arch/arm/nxp/imx6_dwhdmi.c

241

aprint_error(": couldn't enable isfr clock\n");

sys/arch/arm/nxp/imx6_dwhdmi.c

249

aprint_error(": couldn't map registers\n");

sys/arch/arm/nxp/imx6_gpc.c

102

aprint_error(": couldn't map gpc registers: %d\n", error);

sys/arch/arm/nxp/imx6_gpc.c

109

aprint_error(": couldn't register with fdtbus: %d\n", error);

sys/arch/arm/nxp/imx6_gpc.c

92

aprint_error(": couldn't get gpc registers\n");

sys/arch/arm/nxp/imx6_iomux.c

160

aprint_error(": couldn't get iomux registers\n");

sys/arch/arm/nxp/imx6_iomux.c

169

aprint_error(": couldn't map iomux registers: %d\n", error);

sys/arch/arm/nxp/imx6_ocotp.c

105

aprint_error(": couldn't get clock\n");

sys/arch/arm/nxp/imx6_ocotp.c

99

aprint_error(": couldn't get registers\n");

sys/arch/arm/nxp/imx6_pcie.c

134

aprint_error(": couldn't get registers\n");

sys/arch/arm/nxp/imx6_pcie.c

142

aprint_error(": couldn't get registers\n");

sys/arch/arm/nxp/imx6_pcie.c

158

aprint_error(": couldn't acquire reset gpio\n");

sys/arch/arm/nxp/imx6_pcie.c

164

aprint_error(": couldn't get clock pcie_axi\n");

sys/arch/arm/nxp/imx6_pcie.c

169

aprint_error(": couldn't get clock lvds1_gate\n");

sys/arch/arm/nxp/imx6_pcie.c

174

aprint_error(": couldn't get clock pcie_ref\n");

sys/arch/arm/nxp/imx6_pcie.c

181

aprint_error(": couldn't acquire regulator\n");

sys/arch/arm/nxp/imx6_pcie.c

194

aprint_error(": couldn't get clock pcie_ext\n");

sys/arch/arm/nxp/imx6_pcie.c

199

aprint_error(": couldn't get clock pcie_ext_src\n");

sys/arch/arm/nxp/imx6_pwm.c

104

aprint_error(": couldn't get PWM registers\n");

sys/arch/arm/nxp/imx6_pwm.c

114

aprint_error(": couldn't map gpc registers: %d\n", error);

sys/arch/arm/nxp/imx6_pwm.c

134

aprint_error(": couldn't get clk\n");

sys/arch/arm/nxp/imx6_spi.c

125

aprint_error(": couldn't get clock\n");

sys/arch/arm/nxp/imx6_spi.c

151

aprint_error(": couldn't get iomux registers\n");

sys/arch/arm/nxp/imx6_usb.c

111

aprint_error(": couldn't get imxusbc registers\n");

sys/arch/arm/nxp/imx6_usb.c

117

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nxp/imx6_usb.c

123

aprint_error(": couldn't get clock\n");

sys/arch/arm/nxp/imx6_usb.c

142

aprint_error(": couldn't get usbmisc property\n");

sys/arch/arm/nxp/imx6_usb.c

148

aprint_error(": couldn't get usbmisc registers\n");

sys/arch/arm/nxp/imx6_usb.c

153

aprint_error(": couldn't map usbmisc registers: %d\n", error);

sys/arch/arm/nxp/imx6_usbphy.c

103

aprint_error(": couldn't get clock\n");

sys/arch/arm/nxp/imx6_usbphy.c

91

aprint_error(": couldn't get iomux registers\n");

sys/arch/arm/nxp/imx6_usbphy.c

97

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nxp/imx6sx_clk.c

1368

aprint_error(": couldn't get registers\n");

sys/arch/arm/nxp/imx6sx_clk.c

1376

aprint_error(": can't map ccm registers\n");

sys/arch/arm/nxp/imx6sx_clk.c

1383

aprint_error(": can't find anatop device\n");

sys/arch/arm/nxp/imx6sx_clk.c

1388

aprint_error(": can't get anatop registers\n");

sys/arch/arm/nxp/imx6sx_clk.c

1394

aprint_error(": can't map anatop registers\n");

sys/arch/arm/nxp/imx7_gpc.c

121

aprint_error(": couldn't get gpc registers\n");

sys/arch/arm/nxp/imx7_gpc.c

131

aprint_error(": couldn't map gpc registers: %d\n", error);

sys/arch/arm/nxp/imx7_gpc.c

138

aprint_error(": couldn't register with fdtbus: %d\n", error);

sys/arch/arm/nxp/imx7d_ccm.c

310

aprint_error(": couldn't find anatop node\n");

sys/arch/arm/nxp/imx7d_ccm.c

314

aprint_error(": couldn't get anatop registers\n");

sys/arch/arm/nxp/imx7d_ccm.c

318

aprint_error(": couldn't map anatop registers\n");

sys/arch/arm/nxp/imx8mq_usbphy.c

165

aprint_error(": couldn't get registers\n");

sys/arch/arm/nxp/imx8mq_usbphy.c

169

aprint_error(": couldn't map registers\n");

sys/arch/arm/nxp/imx8mq_usbphy.c

176

aprint_error(": couldn't enable phy clock\n");

sys/arch/arm/nxp/imx_ahcisata.c

109

aprint_error(": couldn't get ahci registers\n");

sys/arch/arm/nxp/imx_ahcisata.c

128

aprint_error(": couldn't get clock sata\n");

sys/arch/arm/nxp/imx_ahcisata.c

133

aprint_error(": couldn't get clock sata_ref\n");

sys/arch/arm/nxp/imx_ahcisata.c

138

aprint_error(": couldn't get clock ahb\n");

sys/arch/arm/nxp/imx_ahcisata.c

161

aprint_error(": couldn't map ahci registers: %d\n", error);

sys/arch/arm/nxp/imx_ccm.c

114

aprint_error("%s: no parent for %s\n", __func__, clk->base.name);

sys/arch/arm/nxp/imx_ccm.c

136

aprint_error("%s: no parent for %s\n", __func__, clk->base.name);

sys/arch/arm/nxp/imx_ccm.c

251

aprint_error(": couldn't get registers\n");

sys/arch/arm/nxp/imx_ccm.c

255

aprint_error(": couldn't map registers\n");

sys/arch/arm/nxp/imx_com.c

78

aprint_error(": couldn't get registers\n");

sys/arch/arm/nxp/imx_com.c

83

aprint_error(": couldn't map registers\n");

sys/arch/arm/nxp/imx_com.c

88

aprint_error(": couldn't enable ipg clock\n");

sys/arch/arm/nxp/imx_com.c

94

aprint_error(": couldn't enable per clock\n");

sys/arch/arm/nxp/imx_gpio.c

106

aprint_error(": couldn't get registers\n");

sys/arch/arm/nxp/imx_gpio.c

112

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nxp/imx_gpio.c

155

aprint_error(": couldn't register with fdtbus: %d\n", error);

sys/arch/arm/nxp/imx_i2c.c

63

aprint_error(": couldn't get registers\n");

sys/arch/arm/nxp/imx_i2c.c

69

aprint_error(": couldn't get clock\n");

sys/arch/arm/nxp/imx_sdhc.c

118

aprint_error(": couldn't get registers\n");

sys/arch/arm/nxp/imx_sdhc.c

124

aprint_error(": couldn't get clock\n");

sys/arch/arm/nxp/imx_sdhc.c

157

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/nxp/imx_sdhc.c

177

aprint_error(": couldn't enable clock: %d\n", error);

sys/arch/arm/nxp/imx_sdhc.c

184

aprint_error(": couldn't enable vmmc supply: %d\n", error);

sys/arch/arm/nxp/imx_snvs.c

66

aprint_error(": couldn't get registers\n");

sys/arch/arm/nxp/imxwdog.c

163

aprint_error(": couldn't get registers\n");

sys/arch/arm/nxp/imxwdog.c

169

aprint_error(": couldn't map %" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/pic/pic.c

330

aprint_error("stray interrupt? irq_base=%zu irq=%d\n",

sys/arch/arm/rockchip/rk3288_iomux.c

339

aprint_error(": couldn't acquire grf syscon\n");

sys/arch/arm/rockchip/rk3288_iomux.c

344

aprint_error(": couldn't acquire pmu syscon\n");

sys/arch/arm/rockchip/rk3288_usb.c

161

aprint_error(": couldn't find syscon\n");

sys/arch/arm/rockchip/rk3288_usb.c

165

aprint_error(": couldn't find registers\n");

sys/arch/arm/rockchip/rk3288_usb.c

171

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/rockchip/rk3288_usb.c

175

aprint_error(": couildn't enable clock\n");

sys/arch/arm/rockchip/rk3328_iomux.c

295

aprint_error(": couldn't acquire grf syscon\n");

sys/arch/arm/rockchip/rk3399_iomux.c

494

aprint_error(": couldn't acquire grf syscon\n");

sys/arch/arm/rockchip/rk3399_iomux.c

499

aprint_error(": couldn't acquire pmu syscon\n");

sys/arch/arm/rockchip/rk3399_pcie.c

225

aprint_error(": couldn't get axi registers\n");

sys/arch/arm/rockchip/rk3399_pcie.c

229

aprint_error(": couldn't get apb registers\n");

sys/arch/arm/rockchip/rk3399_pcie.c

320

aprint_error(": couldn't enable phy3\n");

sys/arch/arm/rockchip/rk3399_pcie.c

323

aprint_error(": couldn't enable phy2\n");

sys/arch/arm/rockchip/rk3399_pcie.c

326

aprint_error(": couldn't enable phy1\n");

sys/arch/arm/rockchip/rk3399_pcie.c

329

aprint_error(": couldn't enable phy0\n");

sys/arch/arm/rockchip/rk3588_iomux.c

1016

aprint_error(": couldn't acquire grf syscon\n");

sys/arch/arm/rockchip/rk_anxdp.c

233

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_anxdp.c

239

aprint_error(": couldn't enable pclk clock\n");

sys/arch/arm/rockchip/rk_anxdp.c

245

aprint_error(": couldn't enable dp clock\n");

sys/arch/arm/rockchip/rk_anxdp.c

251

aprint_error(": couldn't enable grf clock\n");

sys/arch/arm/rockchip/rk_anxdp.c

260

aprint_error(": couldn't map registers\n");

sys/arch/arm/rockchip/rk_anxdp.c

266

aprint_error(": couldn't get grf syscon\n");

sys/arch/arm/rockchip/rk_cru.c

165

aprint_error("%s: no parent for %s\n", __func__,

sys/arch/arm/rockchip/rk_cru.c

188

aprint_error("%s: no parent for %s\n", __func__,

sys/arch/arm/rockchip/rk_cru.c

306

aprint_error(": couldn't get grf syscon\n");

sys/arch/arm/rockchip/rk_cru.c

312

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_cru.c

316

aprint_error(": couldn't map registers\n");

sys/arch/arm/rockchip/rk_dwhdmi.c

248

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_dwhdmi.c

254

aprint_error(": couldn't enable iahb clock\n");

sys/arch/arm/rockchip/rk_dwhdmi.c

260

aprint_error(": couldn't enable isfr clock\n");

sys/arch/arm/rockchip/rk_dwhdmi.c

267

aprint_error(": couldn't enable vpll clock\n");

sys/arch/arm/rockchip/rk_dwhdmi.c

273

aprint_error(": couldn't enable grf clock\n");

sys/arch/arm/rockchip/rk_dwhdmi.c

279

aprint_error(": couldn't enable cec clock\n");

sys/arch/arm/rockchip/rk_dwhdmi.c

288

aprint_error(": couldn't map registers\n");

sys/arch/arm/rockchip/rk_dwhdmi.c

294

aprint_error(": couldn't get grf syscon\n");

sys/arch/arm/rockchip/rk_emmcphy.c

245

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_emmcphy.c

253

aprint_error(": couldn't get syscon\n");

sys/arch/arm/rockchip/rk_eqos.c

312

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_eqos.c

318

aprint_error(": couldn't get grf syscon\n");

sys/arch/arm/rockchip/rk_eqos.c

323

aprint_error(": couldn't get php_grf syscon\n");

sys/arch/arm/rockchip/rk_eqos.c

330

aprint_error(": couldn't map registers\n");

sys/arch/arm/rockchip/rk_eqos.c

336

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/rockchip/rk_eqos.c

345

aprint_error(": couldn't enable clock #%d\n", n);

sys/arch/arm/rockchip/rk_eqos.c

353

aprint_error(": couldn't de-assert reset #%d\n", n);

sys/arch/arm/rockchip/rk_eqos.c

358

aprint_error(": GPIO reset failed\n"); /* ignore */

sys/arch/arm/rockchip/rk_eqos.c

382

aprint_error(": unsupported phy-mode '%s'\n", phy_mode);

sys/arch/arm/rockchip/rk_gmac.c

400

aprint_error(": couldn't get %s clock\n", clknames[n]);

sys/arch/arm/rockchip/rk_gmac.c

405

aprint_error(": couldn't enable %s clock: %d\n",

sys/arch/arm/rockchip/rk_gmac.c

414

aprint_error(": couldn't get %s reset\n", rstnames[n]);

sys/arch/arm/rockchip/rk_gmac.c

419

aprint_error(": couldn't de-assert %s reset: %d\n",

sys/arch/arm/rockchip/rk_gmac.c

457

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_gmac.c

465

aprint_error(": couldn't get grf syscon\n");

sys/arch/arm/rockchip/rk_gmac.c

482

aprint_error(": couldn't map registers\n");

sys/arch/arm/rockchip/rk_gmac.c

488

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/rockchip/rk_gmac.c

503

aprint_error(": missing 'phy-mode' property\n");

sys/arch/arm/rockchip/rk_gmac.c

515

aprint_error(": unsupported phy-mode '%s'\n", phy_mode);

sys/arch/arm/rockchip/rk_gmac.c

526

aprint_error(": unsupported phy-mode '%s'\n", phy_mode);

sys/arch/arm/rockchip/rk_gmac.c

537

aprint_error(": unsupported phy-mode '%s'\n", phy_mode);

sys/arch/arm/rockchip/rk_gpio.c

619

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_gpio.c

624

aprint_error(": couldn't enable clock\n");

sys/arch/arm/rockchip/rk_gpio.c

631

aprint_error(": couldn't map registers\n");

sys/arch/arm/rockchip/rk_gpio.c

657

aprint_error(": unknown version 0x%08" PRIx32 "\n", ver_id);

sys/arch/arm/rockchip/rk_i2c.c

387

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_i2c.c

395

aprint_error(": couldn't enable sclk\n");

sys/arch/arm/rockchip/rk_i2c.c

402

aprint_error(": couldn't enable pclk\n");

sys/arch/arm/rockchip/rk_i2c.c

413

aprint_error(": couldn't map registers\n");

sys/arch/arm/rockchip/rk_i2s.c

532

aprint_error(": couldn't find i2s_clk clock\n");

sys/arch/arm/rockchip/rk_i2s.c

537

aprint_error(": couldn't enable i2s_clk clock: %d\n", error);

sys/arch/arm/rockchip/rk_i2s.c

544

aprint_error(": couldn't enable i2s_hclk clock: %d\n", error);

sys/arch/arm/rockchip/rk_i2s.c

571

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_i2s.c

575

aprint_error(": couldn't decode interrupt\n");

sys/arch/arm/rockchip/rk_i2s.c

583

aprint_error(": couldn't map registers\n");

sys/arch/arm/rockchip/rk_i2s.c

593

aprint_error(": couldn't find grf\n");

sys/arch/arm/rockchip/rk_pwm.c

216

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_pwm.c

222

aprint_error(": couldn't get clock\n");

sys/arch/arm/rockchip/rk_pwm.c

231

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d",

sys/arch/arm/rockchip/rk_spi.c

212

aprint_error(": couldn't enable sclk\n");

sys/arch/arm/rockchip/rk_spi.c

218

aprint_error(": couldn't enable pclk\n");

sys/arch/arm/rockchip/rk_spi.c

226

aprint_error(": couldn't map registers\n");

sys/arch/arm/rockchip/rk_spi.c

234

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/rockchip/rk_spi.c

241

aprint_error(": unable to establish interrupt\n");

sys/arch/arm/rockchip/rk_tcphy.c

159

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_tcphy.c

163

aprint_error(": couldn't map registers\n");

sys/arch/arm/rockchip/rk_tcphy.c

179

aprint_error(": unknown address 0x%lx\n", addr);

sys/arch/arm/rockchip/rk_tcphy.c

185

aprint_error(": couldn't get grf syscon\n");

sys/arch/arm/rockchip/rk_tcphy.c

191

aprint_error(": couldn't get reset uphy\n");

sys/arch/arm/rockchip/rk_tcphy.c

196

aprint_error(": couldn't get reset uphy-pipe\n");

sys/arch/arm/rockchip/rk_tcphy.c

201

aprint_error(": couldn't get reset uphy-tcphy\n");

sys/arch/arm/rockchip/rk_tcphy.c

211

aprint_error(": couldn't get tcpdcore clock\n");

sys/arch/arm/rockchip/rk_tcphy.c

216

aprint_error(": couldn't get tcpdphy-ref clock\n");

sys/arch/arm/rockchip/rk_tsadc.c

502

aprint_error(": could not get TSHUT mode, default to GPIO");

sys/arch/arm/rockchip/rk_tsadc.c

506

aprint_error(": TSHUT mode should be 0 or 1\n");

sys/arch/arm/rockchip/rk_tsadc.c

512

aprint_error(": could not get TSHUT polarity, default to low");

sys/arch/arm/rockchip/rk_tsadc.c

517

aprint_error(": could not get TSHUT temperature, default to %u",

sys/arch/arm/rockchip/rk_tsadc.c

544

aprint_error(": couldn't get grf syscon\n");

sys/arch/arm/rockchip/rk_tsadc.c

548

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_tsadc.c

553

aprint_error(": couldn't map registers\n");

sys/arch/arm/rockchip/rk_tsadc.c

559

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/rockchip/rk_tsadc.c

573

aprint_error(": couldn't enable clocks\n");

sys/arch/arm/rockchip/rk_usb.c

219

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_usb.c

225

aprint_error(": couldn't enable phy clock\n");

sys/arch/arm/rockchip/rk_usb.c

233

aprint_error(": couldn't get grf syscon\n");

sys/arch/arm/rockchip/rk_usb.c

414

aprint_error(": couldn't acquire regulator\n");

sys/arch/arm/rockchip/rk_v1crypto.c

154

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_v1crypto.c

158

aprint_error(": couldn't map registers\n");

sys/arch/arm/rockchip/rk_v1crypto.c

165

aprint_error(": couldn't enable %s clock\n", clks[i]);

sys/arch/arm/rockchip/rk_v1crypto.c

173

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/rockchip/rk_vop.c

769

aprint_error(": couldn't get registers\n");

sys/arch/arm/rockchip/rk_vop.c

774

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/rockchip/rk_vop.c

784

aprint_error(": couldn't assert reset %s\n",

sys/arch/arm/rockchip/rk_vop.c

793

aprint_error(": couldn't de-assert reset %s\n",

sys/arch/arm/rockchip/rk_vop.c

801

aprint_error(": couldn't enable clock %s\n", clock_names[n]);

sys/arch/arm/rockchip/rk_vop.c

807

aprint_error(": couldn't enable clock %s\n", "dclk_vop");

sys/arch/arm/rockchip/rk_vop.c

814

aprint_error(": couldn't map registers\n");

sys/arch/arm/s3c2xx0/s3c2410_spi.c

115

aprint_error(": can't map registers\n");

sys/arch/arm/s3c2xx0/s3c2440_rtc.c

89

aprint_error(": failed to map registers");

sys/arch/arm/s3c2xx0/s3c2440_spi.c

154

aprint_error(": can't map registers\n");

sys/arch/arm/s3c2xx0/s3c2440_touch.c

129

aprint_error(": failed to map registers");

sys/arch/arm/s3c2xx0/s3c24x0_lcd.c

336

aprint_error("%s: Unknown depth (%d)\n",

sys/arch/arm/s3c2xx0/s3c24x0_lcd.c

573

aprint_error("%s: can't allocate a screen with requested size:"

sys/arch/arm/s3c2xx0/sscom_s3c2410.c

149

aprint_error( ": failed to map registers\n" );

sys/arch/arm/samsung/exynos5410_clock.c

496

aprint_error(": couldn't get registers\n");

sys/arch/arm/samsung/exynos5410_clock.c

505

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d",

sys/arch/arm/samsung/exynos5422_clock.c

627

aprint_error(": couldn't get registers\n");

sys/arch/arm/samsung/exynos5422_clock.c

636

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d",

sys/arch/arm/samsung/exynos_combiner.c

131

aprint_error(": couldn't get registers\n");

sys/arch/arm/samsung/exynos_combiner.c

141

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d",

sys/arch/arm/samsung/exynos_combiner.c

149

aprint_error(": couldn't register with fdtbus: %d\n", error);

sys/arch/arm/samsung/exynos_dwcmmc.c

102

aprint_error(": couldn't get registers\n");

sys/arch/arm/samsung/exynos_dwcmmc.c

107

aprint_error(": missing samsung,dw-mshc-ciu-div property\n");

sys/arch/arm/samsung/exynos_dwcmmc.c

113

aprint_error(": couldn't get clock biu\n");

sys/arch/arm/samsung/exynos_dwcmmc.c

118

aprint_error(": couldn't get clock ciu\n");

sys/arch/arm/samsung/exynos_dwcmmc.c

124

aprint_error(": couldn't enable clock biu: %d\n", error);

sys/arch/arm/samsung/exynos_dwcmmc.c

129

aprint_error(": couldn't enable clock ciu: %d\n", error);

sys/arch/arm/samsung/exynos_dwcmmc.c

142

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d\n",

sys/arch/arm/samsung/exynos_ehci.c

113

aprint_error(": couldn't map registers\n");

sys/arch/arm/samsung/exynos_ehci.c

83

aprint_error(": couldn't get registers\n");

sys/arch/arm/samsung/exynos_ehci.c

90

aprint_error(": couldn't enable clock\n");

sys/arch/arm/samsung/exynos_ehci.c

98

aprint_error(": couldn't enable phy for %s\n",

sys/arch/arm/samsung/exynos_i2c.c

140

aprint_error(": couldn't get registers\n");

sys/arch/arm/samsung/exynos_i2c.c

148

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr,

sys/arch/arm/samsung/exynos_ohci.c

109

aprint_error(": couldn't map registers\n");

sys/arch/arm/samsung/exynos_ohci.c

83

aprint_error(": couldn't get registers\n");

sys/arch/arm/samsung/exynos_ohci.c

90

aprint_error(": couldn't enable clock\n");

sys/arch/arm/samsung/exynos_ohci.c

98

aprint_error(": couldn't enable phy for %s\n",

sys/arch/arm/samsung/exynos_pinctrl.c

103

aprint_error(": couldn't get registers\n");

sys/arch/arm/samsung/exynos_pinctrl.c

114

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d",

sys/arch/arm/samsung/exynos_platform.c

114

aprint_error("%s: no /cpus node found\n", __func__);

sys/arch/arm/samsung/exynos_platform.c

171

aprint_error("cpu%d: WARNING: AP failed to power on\n", cpuindex);

sys/arch/arm/samsung/exynos_platform.c

188

aprint_error("cpu%d: WARNING: AP failed to start\n", cpuindex);

sys/arch/arm/samsung/exynos_pwm.c

219

aprint_error(": couldn't get registers\n");

sys/arch/arm/samsung/exynos_pwm.c

225

aprint_error(": couldn't enable timers clock\n");

sys/arch/arm/samsung/exynos_pwm.c

234

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/samsung/exynos_rtc.c

100

aprint_error(": couldn't get registers\n");

sys/arch/arm/samsung/exynos_rtc.c

109

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d",

sys/arch/arm/samsung/exynos_soc.c

872

aprint_error("%s not implemented\n", __func__);

sys/arch/arm/samsung/exynos_uart.c

201

aprint_error(": couldn't get registers\n");

sys/arch/arm/samsung/exynos_uart.c

205

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/samsung/exynos_uart.c

210

aprint_error(": failed to enable uart clock\n");

sys/arch/arm/samsung/exynos_uart.c

215

aprint_error(": failed to enable clk_uart_baud0 clock\n");

sys/arch/arm/samsung/exynos_uart.c

230

aprint_error(": failed to map registers\n");

sys/arch/arm/samsung/exynos_uart.c

239

aprint_error(": failed to establish interrupt on %s\n",

sys/arch/arm/samsung/exynos_uart.c

250

aprint_error(": couldn't allocate major number\n");

sys/arch/arm/samsung/exynos_usbdrdphy.c

245

aprint_error(": couldn't get phy registers\n");

sys/arch/arm/samsung/exynos_usbdrdphy.c

253

aprint_error(": couldn't map phy registers\n");

sys/arch/arm/samsung/exynos_usbdrdphy.c

266

aprint_error(": couldn't acquire pmureg syscon\n");

sys/arch/arm/samsung/exynos_usbdrdphy.c

273

aprint_error(": couldn't enable phy clock\n");

sys/arch/arm/samsung/exynos_usbdrdphy.c

278

aprint_error(": couldn't enable ref clock\n");

sys/arch/arm/samsung/exynos_usbphy.c

248

aprint_error(": couldn't get phy registers\n");

sys/arch/arm/samsung/exynos_usbphy.c

256

aprint_error(": couldn't map phy registers\n");

sys/arch/arm/samsung/exynos_usbphy.c

268

aprint_error(": couldn't acquire sysreg syscon\n");

sys/arch/arm/samsung/exynos_usbphy.c

273

aprint_error(": couldn't acquire pmureg syscon\n");

sys/arch/arm/samsung/exynos_usbphy.c

280

aprint_error(": couldn't enable phy clock\n");

sys/arch/arm/samsung/exynos_usbphy.c

285

aprint_error(": couldn't enable ref clock\n");

sys/arch/arm/samsung/exynos_wdt.c

190

aprint_error(": couldn't get registers\n");

sys/arch/arm/samsung/exynos_wdt.c

199

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/samsung/mct.c

251

aprint_error(": couldn't get registers\n");

sys/arch/arm/samsung/mct.c

262

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d",

sys/arch/arm/sociox/if_scx.c

704

aprint_error(": unable to map registers\n");

sys/arch/arm/sociox/if_scx.c

709

aprint_error(": unable to map device eeprom\n");

sys/arch/arm/sociox/if_scx.c

713

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/sociox/if_scx.c

719

aprint_error(": missing 'phy-mode' property\n");

sys/arch/arm/sociox/if_scx.c

739

aprint_error(": couldn't establish interrupt\n");

sys/arch/arm/sociox/if_scx.c

798

aprint_error(": incomplete crs resources\n");

sys/arch/arm/sociox/if_scx.c

803

aprint_error(": unable to map registers\n");

sys/arch/arm/sociox/if_scx.c

808

aprint_error(": incomplete eeprom resources\n");

sys/arch/arm/sociox/if_scx.c

813

aprint_error(": unable to map device eeprom\n");

sys/arch/arm/sociox/if_scx.c

840

aprint_error(": couldn't establish interrupt\n");

sys/arch/arm/sunxi/sun4i_dma.c

364

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sun4i_dma.c

370

aprint_error(": couldn't enable clock\n");

sys/arch/arm/sunxi/sun4i_dma.c

379

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sun4i_dma.c

385

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/sunxi/sun4i_emac.c

254

aprint_error(": cannot get registers\n");

sys/arch/arm/sunxi/sun4i_emac.c

259

aprint_error(": cannot decode interrupt\n");

sys/arch/arm/sunxi/sun4i_emac.c

265

aprint_error(": cannot acquire clock\n");

sys/arch/arm/sunxi/sun4i_emac.c

269

aprint_error(": cannot enable clock\n");

sys/arch/arm/sunxi/sun4i_emac.c

274

aprint_error(": cannot map SRAM to EMAC\n");

sys/arch/arm/sunxi/sun4i_emac.c

283

aprint_error(": cannot map registers\n");

sys/arch/arm/sunxi/sun4i_spi.c

109

aprint_error(": couldn't enable clock\n");

sys/arch/arm/sunxi/sun4i_spi.c

116

aprint_error(": couldn't enable module clock\n");

sys/arch/arm/sunxi/sun4i_spi.c

123

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sun4i_spi.c

135

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/sunxi/sun4i_spi.c

142

aprint_error(": unable to establish interrupt\n");

sys/arch/arm/sunxi/sun50i_a64_acodec.c

633

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sun50i_a64_acodec.c

638

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sun6i_dma.c

461

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sun6i_dma.c

467

aprint_error(": couldn't enable clock\n");

sys/arch/arm/sunxi/sun6i_dma.c

472

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/sunxi/sun6i_dma.c

481

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sun6i_dma.c

487

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/sunxi/sun6i_spi.c

119

aprint_error(": couldn't enable clock\n");

sys/arch/arm/sunxi/sun6i_spi.c

127

aprint_error(": couldn't enable module clock\n");

sys/arch/arm/sunxi/sun6i_spi.c

134

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sun6i_spi.c

140

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/sunxi/sun6i_spi.c

148

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/sunxi/sun6i_spi.c

155

aprint_error(": unable to establish interrupt\n");

sys/arch/arm/sunxi/sun8i_a23_apbclk.c

109

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sun8i_a23_apbclk.c

117

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sun8i_codec.c

381

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sun8i_codec.c

386

aprint_error(": couldn't decode interrupt\n");

sys/arch/arm/sunxi/sun8i_codec.c

393

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sun8i_codec.c

401

aprint_error(": couldn't get clocks\n");

sys/arch/arm/sunxi/sun8i_codec.c

405

aprint_error(": couldn't enable bus clock\n");

sys/arch/arm/sunxi/sun8i_crypto.c

402

aprint_error(": couldn't create workqueue\n");

sys/arch/arm/sunxi/sun8i_crypto.c

415

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sun8i_crypto.c

419

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sun8i_crypto.c

425

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/sunxi/sun8i_crypto.c

431

aprint_error(": couldn't enable bus clock\n");

sys/arch/arm/sunxi/sun8i_crypto.c

439

aprint_error(": couldn't enable CE clock\n");

sys/arch/arm/sunxi/sun8i_crypto.c

443

aprint_error(": couldn't set CE clock to %d MHz\n",

sys/arch/arm/sunxi/sun8i_crypto.c

452

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/sunxi/sun8i_h3_codec.c

459

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sun8i_h3_codec.c

464

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sun8i_v3s_codec.c

431

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sun8i_v3s_codec.c

436

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sun9i_a80_cpusclk.c

111

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sun9i_a80_cpusclk.c

119

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sun9i_a80_mmcclk.c

103

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/sunxi/sun9i_a80_mmcclk.c

98

aprint_error(": couldn't enable clock\n");

sys/arch/arm/sunxi/sun9i_a80_usbclk.c

136

aprint_error(": couldn't enable clock\n");

sys/arch/arm/sunxi/sun9i_a80_usbphy.c

177

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sun9i_a80_usbphy.c

181

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sun9i_a80_usbphy.c

192

aprint_error(": couldn't get hsic resources\n");

sys/arch/arm/sunxi/sun9i_a80_usbphy.c

199

aprint_error(": couldn't get phy resources\n");

sys/arch/arm/sunxi/sunxi_can.c

149

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_can.c

154

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_can.c

159

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/sunxi/sunxi_can.c

165

aprint_error(": couldn't enable clock\n");

sys/arch/arm/sunxi/sunxi_can.c

172

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/sunxi/sunxi_ccu.c

159

aprint_error("%s: no parent for %s\n", __func__, clk->base.name);

sys/arch/arm/sunxi/sunxi_ccu.c

176

aprint_error("%s: no parent for %s\n", __func__, clk->base.name);

sys/arch/arm/sunxi/sunxi_ccu.c

198

aprint_error("%s: no parent for %s\n", __func__, clk->base.name);

sys/arch/arm/sunxi/sunxi_ccu.c

313

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_ccu.c

317

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_codec.c

503

aprint_error(": couldn't get dma channel \"%s\"\n", dmaname);

sys/arch/arm/sunxi/sunxi_codec.c

534

aprint_error(": couldn't find codec clock\n");

sys/arch/arm/sunxi/sunxi_codec.c

539

aprint_error(": couldn't set codec clock rate: %d\n", error);

sys/arch/arm/sunxi/sunxi_codec.c

544

aprint_error(": couldn't enable codec clock: %d\n", error);

sys/arch/arm/sunxi/sunxi_codec.c

551

aprint_error(": couldn't find apb clock\n");

sys/arch/arm/sunxi/sunxi_codec.c

556

aprint_error(": couldn't enable apb clock: %d\n", error);

sys/arch/arm/sunxi/sunxi_codec.c

565

aprint_error(": couldn't de-assert reset: %d\n", error);

sys/arch/arm/sunxi/sunxi_codec.c

592

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_codec.c

604

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_codec.c

615

aprint_error(": couldn't setup channels\n");

sys/arch/arm/sunxi/sunxi_de2.c

62

aprint_error(": cannot map SRAM to DE2\n");

sys/arch/arm/sunxi/sunxi_de2_ccu.c

144

aprint_error(": couldn't enable bus clock\n");

sys/arch/arm/sunxi/sunxi_de2_ccu.c

149

aprint_error(": couldn't enable mod clock\n");

sys/arch/arm/sunxi/sunxi_de2_ccu.c

154

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/sunxi/sunxi_debe.c

165

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_debe.c

168

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_debe.c

178

aprint_error(": couldn't get clocks\n");

sys/arch/arm/sunxi/sunxi_debe.c

188

aprint_error(": couldn't get reset\n");

sys/arch/arm/sunxi/sunxi_dep.c

100

aprint_error("bad/missing allwinner,pipelines property\n");

sys/arch/arm/sunxi/sunxi_dep.c

112

aprint_error("can't activate pipeline %d\n", i);

sys/arch/arm/sunxi/sunxi_dep.c

120

aprint_error("debe not configured\n");

sys/arch/arm/sunxi/sunxi_dwhdmi.c

245

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_dwhdmi.c

251

aprint_error(": couldn't enable iahb clock\n");

sys/arch/arm/sunxi/sunxi_dwhdmi.c

257

aprint_error(": couldn't enable isfr clock\n");

sys/arch/arm/sunxi/sunxi_dwhdmi.c

263

aprint_error(": couldn't enable tmds clock\n");

sys/arch/arm/sunxi/sunxi_dwhdmi.c

271

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_gates.c

226

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_gates.c

234

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_gmac.c

138

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_gmac.c

145

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_gmac.c

151

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/sunxi/sunxi_gmac.c

158

aprint_error(": couldn't get clocks\n");

sys/arch/arm/sunxi/sunxi_gmac.c

166

aprint_error(": missing 'phy-mode' property\n");

sys/arch/arm/sunxi/sunxi_gmac.c

172

aprint_error(": couldn't enable PHY regulator\n");

sys/arch/arm/sunxi/sunxi_gmac.c

178

aprint_error(": failed to set TX clock rate (MII)\n");

sys/arch/arm/sunxi/sunxi_gmac.c

183

aprint_error(": failed to set TX clock rate (RGMII)\n");

sys/arch/arm/sunxi/sunxi_gmac.c

187

aprint_error(": unsupported phy-mode '%s'\n", phy_mode);

sys/arch/arm/sunxi/sunxi_gmac.c

192

aprint_error(": couldn't enable clocks\n");

sys/arch/arm/sunxi/sunxi_gmac.c

197

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/sunxi/sunxi_gmacclk.c

115

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_gmacclk.c

123

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_gmacclk.c

129

aprint_error(": couldn't get parent clocks\n");

sys/arch/arm/sunxi/sunxi_gpio.c

1008

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_gpio.c

1014

aprint_error(": couldn't enable clock\n");

sys/arch/arm/sunxi/sunxi_gpio.c

1020

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/sunxi/sunxi_gpio.c

1028

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_hdmi.c

176

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_hdmi.c

179

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_hdmi.c

190

aprint_error(": couldn't get clocks\n");

sys/arch/arm/sunxi/sunxi_hdmi.c

200

aprint_error(": couldn't enable ahb clock\n");

sys/arch/arm/sunxi/sunxi_hdmiphy.c

415

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_hdmiphy.c

421

aprint_error(": couldn't get reset\n");

sys/arch/arm/sunxi/sunxi_hdmiphy.c

428

aprint_error(": couldn't get clocks\n");

sys/arch/arm/sunxi/sunxi_hdmiphy.c

436

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_hstimer.c

153

aprint_error(": couldn't enable clock\n");

sys/arch/arm/sunxi/sunxi_hstimer.c

159

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_i2s.c

827

aprint_error(": couldn't find mod clock\n");

sys/arch/arm/sunxi/sunxi_i2s.c

834

aprint_error(": couldn't find apb clock\n");

sys/arch/arm/sunxi/sunxi_i2s.c

839

aprint_error(": couldn't enable apb clock: %d\n", error);

sys/arch/arm/sunxi/sunxi_i2s.c

846

aprint_error(": couldn't find reset\n");

sys/arch/arm/sunxi/sunxi_i2s.c

851

aprint_error(": couldn't de-assert reset: %d\n", error);

sys/arch/arm/sunxi/sunxi_i2s.c

877

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_i2s.c

886

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_i2s.c

902

aprint_error(": couldn't setup channels\n");

sys/arch/arm/sunxi/sunxi_intc.c

236

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_intc.c

244

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_lcdc.c

495

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_lcdc.c

500

aprint_error(": couldn't decode interrupt\n");

sys/arch/arm/sunxi/sunxi_lcdc.c

506

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/sunxi/sunxi_lcdc.c

512

aprint_error(": couldn't enable bus clock\n");

sys/arch/arm/sunxi/sunxi_lcdc.c

519

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_lradc.c

114

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_lradc.c

119

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_lradc.c

124

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/sunxi/sunxi_lradc.c

130

aprint_error(": couldn't enable clock\n");

sys/arch/arm/sunxi/sunxi_lradc.c

137

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/sunxi/sunxi_lradc.c

149

aprint_error(": couldn't acquire vref-supply\n");

sys/arch/arm/sunxi/sunxi_lradc.c

158

aprint_error(": couldn't get vref (%d)\n", error);

sys/arch/arm/sunxi/sunxi_mixer.c

632

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_mixer.c

638

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/sunxi/sunxi_mixer.c

644

aprint_error(": couldn't enable bus clock\n");

sys/arch/arm/sunxi/sunxi_mixer.c

652

aprint_error(": couldn't enable mod clock\n");

sys/arch/arm/sunxi/sunxi_mixer.c

659

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_mmc.c

337

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_mmc.c

352

aprint_error(": couldn't get clocks\n");

sys/arch/arm/sunxi/sunxi_mmc.c

362

aprint_error(": couldn't enable clocks\n");

sys/arch/arm/sunxi/sunxi_mmc.c

368

aprint_error(": couldn't de-assert resets\n");

sys/arch/arm/sunxi/sunxi_mmc.c

382

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_mmc.c

388

aprint_error(": couldn't enable vmmc-supply\n");

sys/arch/arm/sunxi/sunxi_musb.c

325

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_musb.c

332

aprint_error(": couldn't enable clock #%d\n", n);

sys/arch/arm/sunxi/sunxi_musb.c

338

aprint_error(": couldn't de-assert reset #%d\n", n);

sys/arch/arm/sunxi/sunxi_musb.c

345

aprint_error(": couldn't enable phy\n");

sys/arch/arm/sunxi/sunxi_musb.c

367

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_nand.c

649

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_nand.c

653

aprint_error(": couldn't decode interrupt\n");

sys/arch/arm/sunxi/sunxi_nand.c

661

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_nmi.c

379

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_nmi.c

388

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_nmi.c

397

aprint_error(": couldn't find GIC SPI for NMI\n");

sys/arch/arm/sunxi/sunxi_pwm.c

201

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_pwm.c

207

aprint_error(": couldn't get clock\n");

sys/arch/arm/sunxi/sunxi_pwm.c

216

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d",

sys/arch/arm/sunxi/sunxi_resets.c

130

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_resets.c

137

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_rsb.c

138

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_rsb.c

143

aprint_error(": couldn't decode interrupt\n");

sys/arch/arm/sunxi/sunxi_rsb.c

149

aprint_error(": couldn't enable clock\n");

sys/arch/arm/sunxi/sunxi_rsb.c

154

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/sunxi/sunxi_rsb.c

162

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_rtc.c

379

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_rtc.c

386

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_sata.c

102

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/sunxi/sunxi_sata.c

108

aprint_error(": couldn't enable clock #%d\n", i);

sys/arch/arm/sunxi/sunxi_sata.c

84

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_sata.c

93

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_sid.c

106

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_sid.c

99

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_sramc.c

211

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_sramc.c

219

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_tcon.c

130

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_tcon.c

133

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_tcon.c

143

aprint_error(": couldn't get clocks\n");

sys/arch/arm/sunxi/sunxi_tcon.c

153

aprint_error(": couldn't get lcd reset\n");

sys/arch/arm/sunxi/sunxi_tcon.c

877

aprint_error("warning: can't parse pipeline %s\n", pipeline);

sys/arch/arm/sunxi/sunxi_thermal.c

579

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_thermal.c

588

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_thermal.c

596

aprint_error(": couldn't enable clocks\n");

sys/arch/arm/sunxi/sunxi_thermal.c

601

aprint_error(": couldn't decode interrupt\n");

sys/arch/arm/sunxi/sunxi_timer.c

198

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_timer.c

203

aprint_error(": couldn't get clock\n");

sys/arch/arm/sunxi/sunxi_timer.c

211

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_ts.c

362

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_ts.c

367

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/sunxi/sunxi_ts.c

375

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_twi.c

139

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_twi.c

144

aprint_error(": couldn't map registers\n");

sys/arch/arm/sunxi/sunxi_twi.c

149

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/sunxi/sunxi_twi.c

155

aprint_error(": couldn't enable clock\n");

sys/arch/arm/sunxi/sunxi_twi.c

160

aprint_error(": couldn't de-assert reset\n");

sys/arch/arm/sunxi/sunxi_usb3phy.c

183

aprint_error(": couldn't get phy registers\n");

sys/arch/arm/sunxi/sunxi_usb3phy.c

189

aprint_error(": couldn't map phy registers\n");

sys/arch/arm/sunxi/sunxi_usb3phy.c

199

aprint_error(": couldn't enable clock #%d\n", n);

sys/arch/arm/sunxi/sunxi_usb3phy.c

205

aprint_error(": couldn't de-assert reset #%d\n", n);

sys/arch/arm/sunxi/sunxi_usbphy.c

364

aprint_error(": couldn't get phy ctrl registers\n");

sys/arch/arm/sunxi/sunxi_usbphy.c

368

aprint_error(": couldn't map phy ctrl registers\n");

sys/arch/arm/sunxi/sunxi_usbphy.c

379

aprint_error(": failed to map reg #%d\n", sc->sc_nphys);

sys/arch/arm/sunxi/sunxi_usbphy.c

390

aprint_error(": couldn't enable clock #%d\n", n);

sys/arch/arm/sunxi/sunxi_usbphy.c

396

aprint_error(": couldn't de-assert reset #%d\n", n);

sys/arch/arm/sunxi/sunxi_wdt.c

255

aprint_error(": couldn't get registers\n");

sys/arch/arm/sunxi/sunxi_wdt.c

262

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/am18xx_aclk.c

164

aprint_error(": couldn't get parent clock");

sys/arch/arm/ti/am18xx_aclk.c

171

aprint_error(": couldn't get syscon registers\n");

sys/arch/arm/ti/am18xx_aclk.c

178

aprint_error(": unexpected clock gate bits\n");

sys/arch/arm/ti/am18xx_intc.c

268

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/am18xx_intc.c

272

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/am18xx_intc.c

277

aprint_error(": couldn't get max interrupt number\n");

sys/arch/arm/ti/am18xx_ohci.c

115

aprint_error(": couldn't get usb clock\n");

sys/arch/arm/ti/am18xx_ohci.c

122

aprint_error(": couldn't get usb phy\n");

sys/arch/arm/ti/am18xx_ohci.c

128

aprint_error(": couldn't enable clocks\n");

sys/arch/arm/ti/am18xx_ohci.c

134

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/am18xx_ohci.c

138

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/am18xx_ohci.c

149

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/ti/am18xx_pllc.c

273

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/am18xx_pllc.c

277

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/am18xx_pllc.c

284

aprint_error(": couldn't get reference clock\n");

sys/arch/arm/ti/am18xx_pllc.c

304

aprint_error(": couldn't get pll0_auxclk child\n");

sys/arch/arm/ti/am18xx_pllc.c

313

aprint_error(": couldn't get pll0_sysclk child\n");

sys/arch/arm/ti/am18xx_psc.c

309

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/am18xx_psc.c

313

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/am18xx_psc.c

336

aprint_error(": couldn't get clock parent for %s\n",

sys/arch/arm/ti/am18xx_timer.c

131

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/am18xx_timer.c

135

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/am18xx_timer.c

141

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/ti/am18xx_usbphy.c

201

aprint_error(": failed to get usb 2.0 phy clk\n");

sys/arch/arm/ti/am18xx_usbphy.c

208

aprint_error(": failed to get usb 1.1 phy clk\n");

sys/arch/arm/ti/am18xx_usbphy.c

215

aprint_error(": couldn't get syscon registers\n");

sys/arch/arm/ti/am18xx_usbphy.c

223

aprint_error(": failed to register usb phy\n");

sys/arch/arm/ti/am18xx_usbphyclk.c

412

aprint_error(": couldn't get syscon registers\n");

sys/arch/arm/ti/am18xx_usbphyclk.c

419

aprint_error(": failed to get auxclk\n");

sys/arch/arm/ti/am18xx_usbphyclk.c

423

aprint_error(": failed to enable reference clk\n");

sys/arch/arm/ti/am18xx_usbphyclk.c

430

aprint_error(": failed to get fck\n");

sys/arch/arm/ti/am18xx_usbphyclk.c

435

aprint_error(": failed to set reference clock freq "

sys/arch/arm/ti/am3_prcm.c

270

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/if_cpsw.c

410

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/omap2_nand.c

205

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/omap2_nand.c

214

aprint_error(": couldn't read reg property\n");

sys/arch/arm/ti/omap2_nand.c

222

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/omap2_nand.c

226

aprint_error(": couldn't map cs registers\n");

sys/arch/arm/ti/omap3_dss.c

204

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/omap3_dss.c

213

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/omap3_platform.c

408

aprint_error("cpu%d: WARNING: AP failed to start\n", cpuindex);

sys/arch/arm/ti/omap4_prcm.c

299

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/omap4_prcm.c

325

aprint_error(": unsupported instance\n");

sys/arch/arm/ti/ti_com.c

104

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr, error);

sys/arch/arm/ti/ti_com.c

109

aprint_error(": couldn't enable module\n");

sys/arch/arm/ti/ti_com.c

89

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_com.c

96

aprint_error(": missing 'clock-frequency' property\n");

sys/arch/arm/ti/ti_div_clock.c

108

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_div_clock.c

116

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_dpll_clock.c

186

aprint_error(": couldn't get prcm registers\n");

sys/arch/arm/ti/ti_dpll_clock.c

195

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_dpll_clock.c

203

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_edma.c

124

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_edma.c

129

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/ti/ti_edma.c

137

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_ehci.c

100

aprint_error(": couldn't de-assert reset #%d\n", n);

sys/arch/arm/ti/ti_ehci.c

115

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_ehci.c

126

aprint_error(": couldn't enable phy\n");

sys/arch/arm/ti/ti_ehci.c

87

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_ehci.c

94

aprint_error(": couldn't enable clock #%d\n", n);

sys/arch/arm/ti/ti_gate_clock.c

112

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_gate_clock.c

120

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_gpio.c

613

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_gpio.c

617

aprint_error(": couldn't decode interrupt\n");

sys/arch/arm/ti/ti_gpio.c

621

aprint_error(": couldn't enable module\n");

sys/arch/arm/ti/ti_gpio.c

628

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_gpmc.c

69

aprint_error(": couldn't enable module\n");

sys/arch/arm/ti/ti_iic.c

244

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_iic.c

248

aprint_error(": couldn't decode interrupt\n");

sys/arch/arm/ti/ti_iic.c

253

aprint_error(": couldn't enable module\n");

sys/arch/arm/ti/ti_iic.c

269

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_iic.c

277

aprint_error(": couldn't establish interrupt\n");

sys/arch/arm/ti/ti_lcdc.c

398

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_lcdc.c

407

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_lcdc.c

412

aprint_error(": couldn't enable module\n");

sys/arch/arm/ti/ti_motg.c

114

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_motg.c

119

aprint_error(": couldn't decode interrupt\n");

sys/arch/arm/ti/ti_motg.c

126

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_mux_clock.c

113

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_mux_clock.c

121

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_omapintc.c

242

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_omapintc.c

249

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_omapmusb.c

180

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_omapmusb.c

185

aprint_error(": couldn't enable module\n");

sys/arch/arm/ti/ti_omapmusb.c

194

aprint_error(": couldn't enable phy\n");

sys/arch/arm/ti/ti_omapmusb.c

204

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_omaptimer.c

194

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_omaptimer.c

210

aprint_error(": couldn't enable module\n");

sys/arch/arm/ti/ti_otg.c

122

aprint_error(": couldn't enable module\n");

sys/arch/arm/ti/ti_otg.c

82

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_otg.c

91

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_prcm.c

207

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_prcm.c

211

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_prcm.c

76

aprint_error("%s: no parent for %s\n", __func__, clk->base.name);

sys/arch/arm/ti/ti_prcm.c

93

aprint_error("%s: no parent for %s\n", __func__, clk->base.name);

sys/arch/arm/ti/ti_rng.c

87

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_rng.c

92

aprint_error(": couldn't enable module\n");

sys/arch/arm/ti/ti_rng.c

99

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_sdhc.c

177

aprint_error(": couldn't enable module\n");

sys/arch/arm/ti/ti_sdhc.c

182

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_sdhc.c

213

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_sdhc.c

243

aprint_error(": couldn't map subregion\n");

sys/arch/arm/ti/ti_usb.c

262

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_usb.c

267

aprint_error(": couldn't enable module\n");

sys/arch/arm/ti/ti_usb.c

274

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_usbtll.c

180

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_usbtll.c

185

aprint_error(": couldn't enable module\n");

sys/arch/arm/ti/ti_usbtll.c

192

aprint_error(": couldn't map registers\n");

sys/arch/arm/ti/ti_wdt.c

219

aprint_error(": couldn't get registers\n");

sys/arch/arm/ti/ti_wdt.c

225

aprint_error(": couldn't enable hwmod\n");

sys/arch/arm/ti/ti_wdt.c

232

aprint_error(": couldn't map registers\n");

sys/arch/arm/vexpress/vexpress_platform.c

150

aprint_error("cpu%d: WARNING: AP failed to start\n",

sys/arch/arm/vexpress/vexpress_sysreg.c

119

aprint_error(": missing 'reg' property\n");

sys/arch/arm/vexpress/vexpress_sysreg.c

126

aprint_error(": couldn't map device\n");

sys/arch/arm/xilinx/zynq7000_clkc.c

386

aprint_error(": couldn't get registers\n");

sys/arch/arm/xilinx/zynq7000_clkc.c

393

aprint_error(": couldn't get syscon registers\n");

sys/arch/arm/xilinx/zynq7000_clkc.c

400

aprint_error(": couldn't get ps-clk-frequency\n");

sys/arch/arm/xilinx/zynq7000_uart.c

69

aprint_error(": couldn't get registers\n");

sys/arch/arm/xilinx/zynq7000_uart.c

74

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/xilinx/zynq7000_uart.c

80

aprint_error(": failed to establish interrupt on %s\n", intrstr);

sys/arch/arm/xilinx/zynq7000_usb.c

86

aprint_error(": couldn't get registers\n");

sys/arch/arm/xilinx/zynq7000_usb.c

91

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/xilinx/zynq7000_usb.c

97

aprint_error("failed to establish interrupt on %s\n",

sys/arch/arm/xilinx/zynq_cemac.c

105

aprint_error(": failed to decode interrupt\n");

sys/arch/arm/xilinx/zynq_cemac.c

111

aprint_error(": failed to establish interrupt on %s\n",

sys/arch/arm/xilinx/zynq_cemac.c

93

aprint_error(": couldn't get registers\n");

sys/arch/arm/xilinx/zynq_cemac.c

99

aprint_error(": failed to map register %#lx@%#lx: %d\n",

sys/arch/arm/xilinx/zynq_gpio.c

282

aprint_error(": couldn't get registers\n");

sys/arch/arm/xilinx/zynq_gpio.c

289

aprint_error(": couldn't map registers\n");

sys/arch/arm/xilinx/zynq_platform.c

203

aprint_error("cpu%d: WARNING: AP failed to start\n",

sys/arch/arm/xilinx/zynq_xadc.c

310

aprint_error(": couldn't get registers\n");

sys/arch/arm/xilinx/zynq_xadc.c

315

aprint_error(": couldn't enable clock\n");

sys/arch/arm/xilinx/zynq_xadc.c

322

aprint_error(": couldn't map registers\n");

sys/arch/arm/xscale/i80321_aau.c

169

aprint_error("%s: unable to subregion registers, error = %d\n",

sys/arch/arm/xscale/i80321_aau.c

179

aprint_error("%s: unable to register error interrupt handler\n",

sys/arch/arm/xscale/i80321_aau.c

187

aprint_error("%s: unable to register EOC interrupt handler\n",

sys/arch/arm/xscale/i80321_aau.c

195

aprint_error("%s: unable to register EOT interrupt handler\n",

sys/arch/arm/xscale/i80321_timer.c

213

aprint_error("Cannot get %d Hz clock; using 100 Hz\n", hz);

sys/arch/arm/xscale/i80321_timer.c

223

aprint_error("Cannot get %d Hz statclock\n", stathz);

sys/arch/arm/xscale/i80321_timer.c

227

aprint_error("Cannot get %d Hz profclock\n", profhz);

sys/arch/arm/xscale/ixp425_com.c

112

aprint_error(": can't map registers\n");

sys/arch/arm/xscale/ixp425_timer.c

139

aprint_error("Cannot get %d Hz clock; using 100 Hz\n", hz);

sys/arch/arm/xscale/ixp425_timer.c

149

aprint_error("Cannot get %d Hz statclock\n", stathz);

sys/arch/arm/xscale/ixp425_timer.c

153

aprint_error("Cannot get %d Hz profclock\n", profhz);

sys/arch/arm/xscale/pxa2x0.c

185

aprint_error("Kernel is configured for %s, but CPU is %s\n",

sys/arch/arm/xscale/pxa2x0_com.c

156

aprint_error(": can't map registers\n");

sys/arch/arm/xscale/pxa2x0_i2s.c

327

aprint_error("pxa2x0_i2s_start_output: "

sys/arch/arm/xscale/pxa2x0_i2s.c

377

aprint_error("pxa2x0_i2s_start_input: "

sys/arch/arm/xscale/pxa2x0_i2s.c

421

aprint_error("pxa2x0_i2s_dmac_ointr: "

sys/arch/arm/xscale/pxa2x0_i2s.c

444

aprint_error("pxa2x0_i2s_dmac_iintr: "

sys/arch/arm/xscale/pxa2x0_rtc.c

97

aprint_error("%s: couldn't map registers\n",

sys/arch/atari/dev/nvram.c

99

aprint_error(": Invalid checksum - re-initialized");

sys/arch/atari/dev/ser.c

304

aprint_error(": Can't establish interrupt (1)\n");

sys/arch/atari/dev/ser.c

306

aprint_error(": Can't establish interrupt (2)\n");

sys/arch/atari/dev/ser.c

308

aprint_error(": Can't establish interrupt (14)\n");

sys/arch/atari/dev/ser.c

310

aprint_error(": Can't establish interrupt (9)\n");

sys/arch/atari/dev/ser.c

312

aprint_error(": Can't establish interrupt (10)\n");

sys/arch/atari/dev/ser.c

314

aprint_error(": Can't establish interrupt (11)\n");

sys/arch/atari/dev/ser.c

316

aprint_error(": Can't establish interrupt (12)\n");

sys/arch/atari/vme/if_le_vme.c

392

aprint_error("Unsupported card!\n");

sys/arch/atari/vme/if_le_vme.c

463

aprint_error("le_vme_attach: Can't establish interrupt\n");

sys/arch/atari/vme/vme_machdep.c

80

aprint_error("beb_alloc_bus_space_tag failed!\n");

sys/arch/bebox/isa/mcclock_isa.c

217

aprint_error(": can't map registers!\n");

sys/arch/cobalt/dev/com_mainbus.c

86

aprint_error(": can't map i/o space\n");

sys/arch/cobalt/dev/gt.c

116

aprint_error(": unable to map GT64111 registers\n");

sys/arch/cobalt/dev/lcdpanel.c

151

aprint_error(": unable to map registers\n");

sys/arch/cobalt/dev/mcclock.c

82

aprint_error("mcclock_attach: unable to map registers\n");

sys/arch/dreamcast/dev/g1/wdc_g1.c

125

aprint_error(": couldn't map registers\n");

sys/arch/dreamcast/dev/g1/wdc_g1.c

133

aprint_error(": couldn't subregion registers\n");

sys/arch/dreamcast/dev/g2/aica.c

188

aprint_error(": can't map AICA register space\n");

sys/arch/dreamcast/dev/g2/aica.c

194

aprint_error(": can't map AICA memory space\n");

sys/arch/dreamcast/dev/g2/if_mbe_g2.c

203

aprint_error(": can't map i/o space\n");

sys/arch/dreamcast/dev/g2/if_mbe_g2.c

212

aprint_error(": where did the card go?!\n");

sys/arch/evbarm/adi_brh/com_obio.c

86

aprint_error(": failed to map registers: %d\n", error);

sys/arch/evbarm/armadaxp/armadaxp_machdep.c

252

aprint_error(": no free windows for PEX MEM\n");

sys/arch/evbarm/armadaxp/armadaxp_machdep.c

277

aprint_error(": no free windows for PEX I/O\n");

sys/arch/evbarm/bcm53xx/bcm53xx_machdep.c

252

aprint_error("cpu%d: WARNING: AP failed to start\n",

sys/arch/evbarm/hdl_g/btn_obio.c

101

aprint_error(": unable to register power button with sysmon\n");

sys/arch/evbarm/hdl_g/btn_obio.c

111

aprint_error(": unable to register reset button with sysmon\n");

sys/arch/evbarm/hdl_g/btn_obio.c

118

aprint_error(": couldn't establish intr handler");

sys/arch/evbarm/hdl_g/btn_obio.c

148

aprint_error("%s: power button pressed\n",

sys/arch/evbarm/hdl_g/btn_obio.c

160

aprint_error("%s: reset button pressed\n",

sys/arch/evbarm/hdl_g/btn_obio.c

90

aprint_error(": failed to map registers: %d\n", error);

sys/arch/evbarm/hdl_g/com_obio.c

85

aprint_error(": failed to map registers: %d\n", error);

sys/arch/evbarm/ifpga/sm_ifpga.c

84

aprint_error(": sm_ifpga_attach: can't map i/o space");

sys/arch/evbarm/ifpga/sm_ifpga.c

90

aprint_error(": couldn't establish interrupt\n");

sys/arch/evbarm/iq31244/wdc_obio.c

100

aprint_error(": couldn't subregion registers\n");

sys/arch/evbarm/iq31244/wdc_obio.c

86

aprint_error(": couldn't map registers\n");

sys/arch/evbarm/iq31244/wdc_obio.c

93

aprint_error(": couldn't subregion registers\n");

sys/arch/evbarm/iq80310/com_obio.c

83

aprint_error(": failed to map registers: %d\n", error);

sys/arch/evbarm/iq80321/com_obio.c

84

aprint_error(": failed to map registers: %d\n", error);

sys/arch/evbarm/ixm1200/ixpcom_ixm.c

80

aprint_error(": unable to map device\n");

sys/arch/evbarm/iyonix/com_obio.c

84

aprint_error(": failed to map registers: %d\n", error);

sys/arch/evbarm/mini2440/if_dm_mini2440.c

123

aprint_error(": unable to map i/o space\n");

sys/arch/evbarm/mini2440/if_dm_mini2440.c

130

aprint_error(": unable to establish interrupt\n");

sys/arch/evbarm/netwalker/netwalker_btn.c

134

aprint_error(": couldn't map the pins\n");

sys/arch/evbarm/netwalker/netwalker_btn.c

141

aprint_error(": pin is unable to read input\n");

sys/arch/evbarm/netwalker/netwalker_btn.c

151

aprint_error(": pin is unable to read input\n");

sys/arch/evbarm/netwalker/netwalker_btn.c

162

aprint_error(": couldn't establish interrupt\n");

sys/arch/evbarm/netwalker/netwalker_btn.c

168

aprint_error(": couldn't establish interrupt\n");

sys/arch/evbarm/netwalker/netwalker_lid.c

103

aprint_error(": couldn't map the pins\n");

sys/arch/evbarm/netwalker/netwalker_lid.c

110

aprint_error(": pin is unable to read input\n");

sys/arch/evbarm/netwalker/netwalker_lid.c

120

aprint_error(": couldn't establish interrupt\n");

sys/arch/evbarm/netwalker/netwalker_pwr.c

104

aprint_error(": couldn't map the pins\n");

sys/arch/evbarm/netwalker/netwalker_pwr.c

111

aprint_error(": pin is unable to read input\n");

sys/arch/evbarm/netwalker/netwalker_pwr.c

121

aprint_error(": couldn't establish interrupt\n");

sys/arch/evbarm/npwr_fc/com_obio.c

85

aprint_error(": failed to map registers: %d\n", error);

sys/arch/evbarm/smdk2xx0/if_cs_smdk24x0.c

197

aprint_error(": unable to map i/o space\n");

sys/arch/evbarm/smdk2xx0/if_cs_smdk24x0.c

203

aprint_error(": unable to map memory space");

sys/arch/evbarm/smdk2xx0/if_cs_smdk24x0.c

218

aprint_error(": unable to establish interrupt\n");

sys/arch/evbarm/tsarm/wdc_ts.c

83

aprint_error(": couldn't map registers\n");

sys/arch/evbarm/tsarm/wdc_ts.c

90

aprint_error(": couldn't subregion registers\n");

sys/arch/evbarm/tsarm/wdc_ts.c

97

aprint_error(": couldn't map registers\n");

sys/arch/evbarm/viper/if_sm_pxaip.c

88

aprint_error(": sm_pxaip_attach: can't map i/o space");

sys/arch/evbarm/viper/if_sm_pxaip.c

96

aprint_error(": couldn't establish interrupt\n");

sys/arch/evbmips/ingenic/intr.c

322

aprint_error("%s: invalid irq %d\n", __func__, irq);

sys/arch/evbmips/ingenic/intr.c

349

aprint_error("%s: invalid irq %d\n", __func__, irq);

sys/arch/evbmips/loongson/dev/kb3310.c

163

aprint_error(": couldn't map I/O space");

sys/arch/evbmips/loongson/dev/kb3310.c

171

aprint_error(", unable to register update task\n");

sys/arch/evbmips/loongson/dev/stvii.c

51

#define DPRINTF aprint_error

sys/arch/evbmips/loongson/loongson_clock.c

115

aprint_error("couldn't create 'cpu' node\n");

sys/arch/evbmips/loongson/loongson_clock.c

121

aprint_error("couldn't create 'frequency' node\n");

sys/arch/evbmips/loongson/loongson_clock.c

130

aprint_error("couldn't create 'target' node\n");

sys/arch/evbmips/loongson/loongson_clock.c

139

aprint_error("couldn't create 'current' node\n");

sys/arch/evbmips/loongson/loongson_clock.c

148

aprint_error("couldn't create 'available' node\n");

sys/arch/evbmips/loongson/loongson_clock.c

45

#define DPRINTF aprint_error

sys/arch/evbmips/mipssim/com_mainbus.c

84

aprint_error(": can't map i/o space\n");

sys/arch/evbmips/mipssim/mipssim_intr.c

136

aprint_error("%s: invalid irq %d\n", __func__, irq);

sys/arch/evbmips/mipssim/virtio_mainbus.c

91

aprint_error(": can't map i/o space\n");

sys/arch/evbmips/sbmips/cpu.c

151

aprint_error(": CFE call to start failed: %d\n",

sys/arch/evbmips/sbmips/cpu.c

160

aprint_error(": failed to hatch!\n");

sys/arch/evbppc/ev64260/autoconf.c

141

aprint_error("WARNING: unknown mac-no. for %s\n",

sys/arch/evbppc/ev64260/autoconf.c

146

aprint_error(

sys/arch/evbppc/ev64260/autoconf.c

217

aprint_error(

sys/arch/evbppc/ev64260/com_obio.c

141

aprint_error(": can't map registers\n");

sys/arch/evbppc/mpc85xx/ds1553rtc.c

115

aprint_error(": failed to map registers: %d\n", error);

sys/arch/evbppc/mpc85xx/wdc_obio.c

139

aprint_error(": couldn't map registers\n");

sys/arch/evbppc/nintendo/dev/ahcisata_ahb.c

99

aprint_error(": couldn't map registers\n");

sys/arch/evbppc/nintendo/dev/bwai.c

280

aprint_error(": couldn't map registers\n");

sys/arch/evbppc/nintendo/dev/bwdsp.c

381

aprint_error(": couldn't map registers\n");

sys/arch/evbppc/nintendo/dev/di.c

169

aprint_error(": couldn't map registers (%d)\n", error);

sys/arch/evbppc/nintendo/dev/ehci_ahb.c

83

aprint_error(": couldn't map registers\n");

sys/arch/evbppc/nintendo/dev/hwgpio.c

207

aprint_error(": couldn't map registers (%d)\n", error);

sys/arch/evbppc/nintendo/dev/ohci_ahb.c

83

aprint_error(": couldn't map registers (%d)\n", error);

sys/arch/evbppc/nintendo/dev/sdhc_ahb.c

90

aprint_error(": couldn't map registers\n");

sys/arch/evbppc/pmppc/dev/ds17485.c

199

aprint_error(": can't map i/o space\n");

sys/arch/evbppc/walnut/dev/pckbc_pbus.c

145

aprint_error("pckbc_pbus_intr_establish: attempt to establish "

sys/arch/ews4800mips/sbd/if_le_sbdio.c

107

aprint_error(": cannot map registers\n");

sys/arch/ews4800mips/sbd/if_le_sbdio.c

114

aprint_error(": can't allocate DMA memory\n");

sys/arch/ews4800mips/sbd/if_le_sbdio.c

119

aprint_error(": can't map DMA memory\n");

sys/arch/ews4800mips/sbd/if_le_sbdio.c

124

aprint_error(": can't create DMA map\n");

sys/arch/ews4800mips/sbd/if_le_sbdio.c

129

aprint_error(": can't load DMA map\n");

sys/arch/ews4800mips/sbd/mkclock_sbdio.c

101

aprint_error(": can't map device space\n");

sys/arch/ews4800mips/sbd/osiop_sbdio.c

73

aprint_error(": can't map registers, error = %d\n", error);

sys/arch/hp300/dev/arcofi_dio.c

79

aprint_error(": can't map registers\n");

sys/arch/hp300/dev/com_dio.c

143

aprint_error(": can't map i/o space\n");

sys/arch/hp300/dev/com_frodo.c

142

aprint_error(": can't map i/o space\n");

sys/arch/hp300/dev/ct.c

237

aprint_error(": didn't respond to describe command!\n");

sys/arch/hp300/dev/dcm.c

385

aprint_error(": can't map registers\n");

sys/arch/hp300/dev/dio.c

238

aprint_error("WARNING: select code size unknown "

sys/arch/hp300/dev/dma.c

196

aprint_error(": can't map registers\n");

sys/arch/hp300/dev/dnkbd.c

295

aprint_error(": can't map i/o space\n");

sys/arch/hp300/dev/dvbox.c

233

aprint_error(": can't map framebuffer\n");

sys/arch/hp300/dev/dvbox.c

238

aprint_error(": can't reset framebuffer\n");

sys/arch/hp300/dev/fhpib.c

172

aprint_error(": can't map registers\n");

sys/arch/hp300/dev/gbox.c

242

aprint_error(": can't map framebuffer\n");

sys/arch/hp300/dev/gbox.c

247

aprint_error(": can't reset framebuffer\n");

sys/arch/hp300/dev/gendiofb.c

126

aprint_error(": can't map framebuffer\n");

sys/arch/hp300/dev/gendiofb.c

131

aprint_error(": failed to reset\n");

sys/arch/hp300/dev/hil_intio.c

89

aprint_error(": couldn't map hil controller\n");

sys/arch/hp300/dev/hyper.c

185

aprint_error(": can't map framebuffer\n");

sys/arch/hp300/dev/hyper.c

190

aprint_error(": can't reset framebuffer\n");

sys/arch/hp300/dev/if_le.c

187

aprint_error(": can't map LANCE registers\n");

sys/arch/hp300/dev/if_le.c

192

aprint_error(": can't subregion LANCE space\n");

sys/arch/hp300/dev/if_le.c

197

aprint_error(": can't subregion buffer space\n");

sys/arch/hp300/dev/mcclock_frodo.c

84

aprint_error(": can't map register\n");

sys/arch/hp300/dev/mt.c

198

aprint_error(": impossible!\n");

sys/arch/hp300/dev/nhpib.c

199

aprint_error(": can't map registers\n");

sys/arch/hp300/dev/nhpib.c

223

aprint_error(": can't map registers\n");

sys/arch/hp300/dev/rbox.c

233

aprint_error(": can't map framebuffer\n");

sys/arch/hp300/dev/rbox.c

238

aprint_error(": can't reset framebuffer\n");

sys/arch/hp300/dev/rd.c

509

aprint_error(": didn't respond to describe command!\n");

sys/arch/hp300/dev/rtc.c

102

aprint_error(": can't map registers\n");

sys/arch/hp300/dev/spc.c

117

aprint_error(": can't map SCSI registers\n");

sys/arch/hp300/dev/spc.c

122

aprint_error(": can't map SPC registers\n");

sys/arch/hp300/dev/sti_dio.c

111

aprint_error(": can't map frame buffer");

sys/arch/hp300/dev/sti_dio.c

99

aprint_error(": can't map frame buffer");

sys/arch/hp300/dev/sti_sgc.c

88

aprint_error(": can't map ROM");

sys/arch/hp300/dev/sti_sgc.c

99

aprint_error(": can't map frame buffer");

sys/arch/hp300/dev/topcat.c

257

aprint_error(": can't map framebuffer\n");

sys/arch/hp300/dev/topcat.c

262

aprint_error(": can't reset framebuffer\n");

sys/arch/hp300/dev/tvrx.c

118

aprint_error(": can't map framebuffer\n");

sys/arch/hp300/dev/tvrx.c

123

aprint_error(": can't reset framebuffer\n");

sys/arch/hpcarm/dev/wzero3_kbd.c

271

aprint_error(": unknown model\n");

sys/arch/hpcarm/dev/wzero3_keypad.c

300

aprint_error(": unknown model\n");

sys/arch/hpcarm/dev/wzero3_lcd.c

233

aprint_error(": unknown model\n");

sys/arch/hpcarm/dev/wzero3_mci.c

155

aprint_error(": Unknown model.");

sys/arch/hpcarm/dev/wzero3_ssp.c

334

aprint_error("%s: not configured\n", __func__);

sys/arch/hpcarm/dev/wzero3_ssp.c

350

aprint_error("%s: invalid IC %d\n", __func__, ic);

sys/arch/hpcmips/dev/com_hpcio.c

327

aprint_error(": can't map bus space\n");

sys/arch/hpcmips/vr/com_vrip.c

121

aprint_error(": can't map i/o space\n");

sys/arch/hpcmips/vr/com_vrip.c

140

aprint_error(": need addr and intr.\n");

sys/arch/hpcmips/vr/com_vrip.c

180

aprint_error(": can't map bus space\n");

sys/arch/hpcmips/vr/vrpiu.c

339

aprint_error("%s: WARNING: couldn't establish powerhook\n",

sys/arch/hpcsh/dev/hd64461/hd64461uart.c

197

aprint_error(": device problem. don't attach.\n");

sys/arch/hpcsh/dev/hd64465/hd64465uart.c

172

aprint_error(": device problem. don't attach.\n");

sys/arch/hppa/dev/asp.c

207

aprint_error(": can't map interrupt registers.\n");

sys/arch/hppa/dev/asp.c

217

aprint_error(": can't map miscellaneous registers.\n");

sys/arch/hppa/dev/asp.c

227

aprint_error(": can't map EEPROM.\n");

sys/arch/hppa/dev/astro.c

246

aprint_error(": can't map IO space\n");

sys/arch/hppa/dev/astro.c

284

aprint_error(": can't allocate PDIR\n");

sys/arch/hppa/dev/astro.c

291

aprint_error(": can't map PDIR\n");

sys/arch/hppa/dev/com_dino.c

117

aprint_error(": can't comcnattach\n");

sys/arch/hppa/dev/com_dino.c

131

aprint_error(": can't map I/O space\n");

sys/arch/hppa/dev/com_ssio.c

84

aprint_error(": can't map I/O space\n");

sys/arch/hppa/dev/com_ssio.c

96

aprint_error(": can't comcnattach\n");

sys/arch/hppa/dev/cpu.c

198

aprint_error(": unable to allocate CPU stack!\n");

sys/arch/hppa/dev/dino.c

1759

aprint_error(": can't map space\n");

sys/arch/hppa/dev/elroy.c

1282

aprint_error(": can't map space\n");

sys/arch/hppa/dev/elroy.c

1299

aprint_error(": reset failed; status %s\n", buf);

sys/arch/hppa/dev/gecko.c

73

aprint_error(": can't map IO space\n");

sys/arch/hppa/dev/lasi.c

160

aprint_error(": can't map interrupt registers\n");

sys/arch/hppa/dev/lasi.c

170

aprint_error(": can't map misc registers\n");

sys/arch/hppa/dev/lasi.c

182

aprint_error(": can't allocate interrupt\n");

sys/arch/hppa/dev/lcd.c

82

aprint_error(": can't map cmd register\n");

sys/arch/hppa/dev/lcd.c

88

aprint_error(": can't map data register\n");

sys/arch/hppa/dev/lpt_ssio.c

62

aprint_error(": can't map i/o ports\n");

sys/arch/hppa/dev/mongoose.c

607

aprint_error(": can't map registers\n");

sys/arch/hppa/dev/mongoose.c

614

aprint_error(": can't map control registers\n");

sys/arch/hppa/dev/mongoose.c

622

aprint_error(": can't allocate interrupt\n");

sys/arch/hppa/dev/power.c

253

aprint_error("PDC_SOFT_POWER_ENABLE failed (%d)\n", error);

sys/arch/hppa/dev/siop_sgc.c

93

aprint_error(": can't map io space\n");

sys/arch/hppa/dev/siop_sgc.c

99

aprint_error(": can't allocate interrupt\n");

sys/arch/hppa/dev/ssio.c

208

aprint_error(" at %s", intrstr);

sys/arch/hppa/dev/ssio.c

209

aprint_error("\n");

sys/arch/hppa/dev/sti_sgc.c

263

aprint_error(": can't map rom space (%d)\n", rv);

sys/arch/hppa/dev/uturn.c

294

aprint_error(": can't map IO space\n");

sys/arch/hppa/dev/wax.c

119

aprint_error(": can't allocate interrupt\n");

sys/arch/hppa/dev/wax.c

133

aprint_error(": can't map interrupt registers\n");

sys/arch/hppa/gsc/com_gsc.c

121

aprint_error(": can't comcnattach\n");

sys/arch/hppa/gsc/com_gsc.c

135

aprint_error(": can't map I/O space\n");

sys/arch/hppa/gsc/fdc_gsc.c

86

aprint_error(": can't map I/O ports\n");

sys/arch/hppa/gsc/harmony.c

227

aprint_error(": couldn't map registers\n");

sys/arch/hppa/gsc/harmony.c

238

aprint_error(": unknown id == 0x%02x\n",

sys/arch/hppa/gsc/harmony.c

247

aprint_error(": could not alloc DMA memory\n");

sys/arch/hppa/gsc/harmony.c

254

aprint_error(": couldn't map DMA memory\n");

sys/arch/hppa/gsc/harmony.c

263

aprint_error(": can't create DMA map\n");

sys/arch/hppa/gsc/harmony.c

273

aprint_error(": can't load DMA map\n");

sys/arch/hppa/gsc/hil_gsc.c

84

aprint_error(": couldn't map hil controller\n");

sys/arch/hppa/gsc/if_iee_gsc.c

226

aprint_error(": iee_gsc_attach: can't map I/O space\n");

sys/arch/hppa/gsc/lpt_gsc.c

210

aprint_error(": can't map i/o ports\n");

sys/arch/hppa/gsc/oosiop_gsc.c

149

aprint_error(": couldn't map I/O ports\n");

sys/arch/hppa/gsc/oosiop_gsc.c

154

aprint_error(": couldn't get chip ports\n");

sys/arch/hppa/gsc/osiop_gsc.c

149

aprint_error(": couldn't map I/O ports\n");

sys/arch/hppa/gsc/osiop_gsc.c

154

aprint_error(": couldn't get chip ports\n");

sys/arch/hppa/gsc/siop_gsc.c

91

aprint_error(": can't map io space\n");

sys/arch/hppa/hppa/autoconf.c

579

aprint_error("WARNING: too many (%d) addrs\n",

sys/arch/i386/eisa/eisa_machdep.c

135

aprint_error("eisa_intr_map: bad IRQ %d\n", irq);

sys/arch/i386/isa/ahc_isa.c

206

aprint_error("ahc_isa_idstring: no device at 0x%lx\n",

sys/arch/i386/isa/ahc_isa.c

208

aprint_error("\t(0x%x, 0x%x)\n", vid[0], vid[1]);

sys/arch/i386/isa/ahc_isa.c

215

aprint_error("ahc_isa_idstring: BIOS biffed it at 0x%lx\n",

sys/arch/i386/isa/ahc_isa.c

260

aprint_error("ahc_isa_match: can't map I/O space for 0x%x\n",

sys/arch/i386/isa/ahc_isa.c

281

aprint_error("ahc_isa_match: irq mismatch (kernel %d, card %d)\n",

sys/arch/i386/isa/ahc_isa.c

375

aprint_error(": can't map i/o space\n");

sys/arch/i386/isa/ahc_isa.c

379

aprint_error(": can't read ID string\n");

sys/arch/i386/isa/ahc_isa.c

383

aprint_error(": ahc_aic77xx_irq failed\n");

sys/arch/i386/isa/ahc_isa.c

392

aprint_error(": unknown device type %s\n", idstring);

sys/arch/i386/pci/gcscehci.c

120

aprint_error("%s: can't map memory space\n", devname);

sys/arch/i386/pci/gcscehci.c

135

aprint_error("%s: couldn't map interrupt\n", devname);

sys/arch/i386/pci/gcscehci.c

141

aprint_error("%s: couldn't establish interrupt", devname);

sys/arch/i386/pci/gcscehci.c

143

aprint_error(" at %s", intrstr);

sys/arch/i386/pci/gcscehci.c

144

aprint_error("\n");

sys/arch/i386/pci/gcscehci.c

169

aprint_error("%s: init failed, error=%d\n", devname, err);

sys/arch/i386/pci/geode.c

111

aprint_error(": unable to map registers\n");

sys/arch/i386/pci/geodewdg.c

247

aprint_error(

sys/arch/i386/pci/geodewdg.c

256

aprint_error("%s: unable to register watchdog with sysmon\n",

sys/arch/i386/pci/glxsb.c

216

aprint_error(": unknown ID 0x%x\n",

sys/arch/i386/pci/glxsb.c

227

aprint_error(": can't find mem space\n");

sys/arch/i386/pci/pcibios.c

204

aprint_error("Warning: unable to fix up PCI interrupt "

sys/arch/i386/pci/pcibios.c

258

aprint_error("pcibios_pir_init: bad IRQ table checksum\n");

sys/arch/i386/pci/pcibios.c

263

aprint_error("pcibios_pir_init: bad IRQ table size\n");

sys/arch/i386/pci/pcibios.c

268

aprint_error("pcibios_pir_init: unsupported IRQ table "

sys/arch/i386/pci/pcibios.c

457

aprint_error("%s: unknown return code 0x%x\n", func, rv);

sys/arch/i386/pci/pcibios.c

461

aprint_error("%s: %s\n", func, errstr);

sys/arch/i386/pnpbios/com_pnpbios.c

108

aprint_error(": com probe failed\n");

sys/arch/i386/pnpbios/com_pnpbios.c

87

aprint_error(": can't get iobase\n");

sys/arch/i386/pnpbios/com_pnpbios.c

93

aprint_error(": can't map i/o space\n");

sys/arch/i386/pnpbios/ess_pnpbios.c

106

aprint_error(": can't get IRQ\n");

sys/arch/i386/pnpbios/ess_pnpbios.c

115

aprint_error(": can't get DMA channel\n");

sys/arch/i386/pnpbios/ess_pnpbios.c

92

aprint_error(": can't map i/o space\n");

sys/arch/i386/pnpbios/joy_pnpbios.c

79

aprint_error(": can't map i/o space\n");

sys/arch/i386/pnpbios/lm_pnpbios.c

137

aprint_error(": can't map i/o space\n");

sys/arch/i386/pnpbios/lpt_pnpbios.c

82

aprint_error(": can't map i/o space\n");

sys/arch/i386/pnpbios/pciide_pnpbios.c

184

aprint_error(

sys/arch/i386/pnpbios/pckbc_pnpbios.c

119

aprint_error(": unknown port!\n");

sys/arch/i386/pnpbios/pnpbios.c

330

aprint_error(": no vm for mapping\n");

sys/arch/i386/pnpbios/pnpbios.c

348

aprint_error(": pnpbios_getnumnodes: error %d\n", res);

sys/arch/i386/pnpbios/pnpbios.c

807

aprint_error("error in config data\n");

sys/arch/i386/pnpbios/pnpbios.c

817

aprint_error("error in possible configuration\n");

sys/arch/i386/pnpbios/pnpbios.c

824

aprint_error("error in compatible ID\n");

sys/arch/i386/pnpbios/sb_pnpbios.c

81

aprint_error(": can't map i/o space\n");

sys/arch/i386/pnpbios/sb_pnpbios.c

91

aprint_error(": can't get IRQ\n");

sys/arch/i386/pnpbios/sb_pnpbios.c

96

aprint_error(": can't get DMA channel\n");

sys/arch/i386/pnpbios/wss_pnpbios.c

121

aprint_error(": can't map i/o space\n");

sys/arch/i386/pnpbios/wss_pnpbios.c

126

aprint_error(": can't map i/o space\n");

sys/arch/i386/pnpbios/wss_pnpbios.c

134

aprint_error(": can't get IRQ\n");

sys/arch/i386/pnpbios/wss_pnpbios.c

139

aprint_error(": can't get DMA channel\n");

sys/arch/i386/pnpbios/wss_pnpbios.c

143

aprint_error(": can't get recording DMA channel");

sys/arch/i386/pnpbios/ym_pnpbios.c

102

aprint_error(": can't map opl i/o space\n");

sys/arch/i386/pnpbios/ym_pnpbios.c

108

aprint_error(": can't map mpu i/o space\n");

sys/arch/i386/pnpbios/ym_pnpbios.c

114

aprint_error(": can't map control i/o space\n");

sys/arch/i386/pnpbios/ym_pnpbios.c

121

aprint_error(": can't get IRQ\n");

sys/arch/i386/pnpbios/ym_pnpbios.c

126

aprint_error(": can't get DMA channel\n");

sys/arch/i386/pnpbios/ym_pnpbios.c

92

aprint_error(": can't map sb i/o space\n");

sys/arch/i386/pnpbios/ym_pnpbios.c

97

aprint_error(": can't map sb i/o space\n");

sys/arch/iyonix/iyonix/com_obio.c

84

aprint_error(": failed to map registers: %d\n", error);

sys/arch/landisk/landisk/autoconf.c

119

aprint_error("match_bootdisk: can't open dev %s (%d)\n",

sys/arch/landisk/landisk/autoconf.c

131

aprint_error("match_bootdisk: can't get label for dev %s (%d)\n",

sys/arch/landisk/landisk/autoconf.c

187

aprint_error("WARNING: double match for boot "

sys/arch/m68k/m68k/m68k_intr.c

177

aprint_error("%s: vector=0x%x (invalid)\n", __func__,

sys/arch/m68k/m68k/m68k_intr.c

186

aprint_error("%s: vector=0x%x (in use)\n", __func__,

sys/arch/m68k/m68k/m68k_intr.c

192

aprint_error("%s: vector=0x%x (unavailable)\n", __func__,

sys/arch/mac68k/dev/pbbat.c

458

aprint_error("%s: unable to register AC with sysmon\n",

sys/arch/mac68k/dev/pbbat.c

526

aprint_error("failed to initialize sysmon\n");

sys/arch/mac68k/dev/pm_direct.c

1307

aprint_error("screen: couldn't add sysctl nodes\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

138

aprint_error(": can't map memory space\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

164

aprint_error(": failed to map register space\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

169

aprint_error(": failed to determine size of RAM.\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

174

aprint_error(": failed to map register space\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

184

aprint_error(": can't find MAC address\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

200

aprint_error(": failed to map register space\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

206

aprint_error(": failed to map register space\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

216

aprint_error(": can't find MAC address\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

221

aprint_error(": unsupported Dayna hardware\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

232

aprint_error(": failed to map register space\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

237

aprint_error(": failed to determine size of RAM.\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

242

aprint_error(": failed to map register space\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

252

aprint_error(": can't find MAC address\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

268

aprint_error(": failed to map register space\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

273

aprint_error(": failed to determine size of RAM.\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

278

aprint_error(": failed to map register space\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

303

aprint_error(": failed to map register space\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

308

aprint_error(": failed to determine size of RAM.\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

313

aprint_error(": failed to map register space\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

317

aprint_error(": can't find MAC address\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

331

aprint_error(": failed to map register space\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

336

aprint_error(": failed to determine size of RAM.\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

341

aprint_error(": failed to map register space\n");

sys/arch/mac68k/nubus/if_ae_nubus.c

345

aprint_error(": can't find MAC address\n");

sys/arch/mac68k/nubus/if_sn_nubus.c

113

aprint_error(": failed to map memory space.\n");

sys/arch/mac68k/nubus/if_sn_nubus.c

134

aprint_error(": failed to map register space.\n");

sys/arch/mac68k/nubus/if_sn_nubus.c

140

aprint_error(": failed to map ROM space.\n");

sys/arch/mac68k/nubus/if_sn_nubus.c

157

aprint_error(": failed to map register space.\n");

sys/arch/mac68k/nubus/if_sn_nubus.c

163

aprint_error(": failed to map ROM space.\n");

sys/arch/mac68k/nubus/if_sn_nubus.c

181

aprint_error(": failed to map register space.\n");

sys/arch/mac68k/nubus/if_sn_nubus.c

187

aprint_error(": failed to map ROM space.\n");

sys/arch/mac68k/nubus/if_sn_nubus.c

204

aprint_error(": failed to map register space.\n");

sys/arch/mac68k/nubus/if_sn_nubus.c

210

aprint_error(": failed to map ROM space.\n");

sys/arch/mac68k/nubus/if_sn_nubus.c

231

aprint_error(": unknown card: attachment incomplete.\n");

sys/arch/mac68k/nubus/if_sn_nubus.c

246

aprint_error(": %s\n", cardtype);

sys/arch/mac68k/obio/ascaudio.c

1057

aprint_error("%s: unable to register cfattach\n",

sys/arch/mac68k/obio/ascaudio.c

1067

aprint_error("%s: unable to register cfdata\n",

sys/arch/mac68k/obio/ascaudio.c

1082

aprint_error("%s: unable to register devsw\n",

sys/arch/mac68k/obio/esp.c

220

aprint_error(": failed to map 4 at 0x%lx.\n", addr);

sys/arch/mac68k/obio/if_sn_obio.c

107

aprint_error(": failed to map space for SONIC regs.\n");

sys/arch/mac68k/obio/if_sn_obio.c

148

aprint_error(": unsupported machine type\n");

sys/arch/mac68k/obio/if_sn_obio.c

154

aprint_error(": failed to get MAC address.\n");

sys/arch/mac68k/obio/if_sn_obio.c

177

aprint_error(": failed to map space to read SONIC address.\n");

sys/arch/mac68k/obio/wdc_obio.c

150

aprint_error(": couldn't map registers\n");

sys/arch/mac68k/obio/wdc_obio.c

159

aprint_error(

sys/arch/mac68k/obio/wdc_obio.c

167

aprint_error(": unable to subregion aux register\n");

sys/arch/mac68k/obio/wdc_obio.c

175

aprint_error(": couldn't map intr status register\n");

sys/arch/macppc/dev/if_bm.c

204

aprint_error(": couldn't map %#x", ca->ca_reg[0]);

sys/arch/macppc/dev/if_bm.c

211

aprint_error(": cannot get mac-address\n");

sys/arch/macppc/dev/kauai.c

122

aprint_error(": cannot find kauai node\n");

sys/arch/macppc/dev/kauai.c

127

aprint_error(": cannot get address property\n");

sys/arch/macppc/dev/kauai.c

161

aprint_error(": unable to map interrupt\n");

sys/arch/macppc/dev/ki2c.c

165

aprint_error(": cannot get i2c-rate\n");

sys/arch/macppc/dev/ki2c.c

169

aprint_error(": unable to find i2c address\n");

sys/arch/macppc/dev/ki2c.c

178

aprint_error(": unable to find i2c address step\n");

sys/arch/macppc/dev/mesh.c

221

aprint_error(": unknown MESH ID (0x%x)\n", sc->sc_meshid);

sys/arch/macppc/dev/mesh.c

226

aprint_error(": cannot get clock-frequency\n");

sys/arch/macppc/dev/obiofan.c

105

aprint_error("no platform-do-getTACHCount\n");

sys/arch/macppc/dev/smartbat.c

188

aprint_error("%s: unable to register AC with sysmon\n",

sys/arch/macppc/dev/smartbat.c

248

aprint_error("%s: unable to register with sysmon\n",

sys/arch/macppc/dev/wdc_obio.c

145

aprint_error(": couldn't get irq property\n");

sys/arch/macppc/dev/zs.c

249

aprint_error(": cannot find interrupt property\n");

sys/arch/macppc/dev/zs.c

254

aprint_error(": cannot find reg property\n");

sys/arch/macppc/macppc/interrupts.c

190

aprint_error(": can't find interrupt\n");

sys/arch/macppc/macppc/interrupts.c

230

aprint_error("failed to find a PIC for node %08x\n",

sys/arch/macppc/macppc/pic_ohare.c

216

aprint_error("%s: ev %08x\n", __func__, events);

sys/arch/macppc/macppc/pic_u3_ht.c

51

#define DPRINTF aprint_error

sys/arch/macppc/pci/pci_machdep.c

412

aprint_error("interrupt-map too long\n");

sys/arch/macppc/pci/pci_machdep.c

465

aprint_error("interrupt-map inconsistent (%d, %d)\n",

sys/arch/mips/adm5120/dev/admpci.c

192

aprint_error(

sys/arch/mips/adm5120/dev/admpci.c

198

aprint_error(

sys/arch/mips/adm5120/dev/uart.c

135

aprint_error("unable to map device\n");

sys/arch/mips/adm5120/dev/uart.c

142

aprint_error("unable to establish interrupt\n");

sys/arch/mips/adm5120/dev/wdc_extio.c

174

aprint_error("%s: couldn't map registers\n", __func__);

sys/arch/mips/adm5120/dev/wdc_extio.c

182

aprint_error(

sys/arch/mips/adm5120/dev/wdc_extio.c

191

aprint_error("%s: unable to subregion data register\n",

sys/arch/mips/adm5120/dev/wdc_extio.c

197

aprint_error("%s: unable to subregion aux register\n",

sys/arch/mips/alchemy/dev/augpio.c

132

aprint_error(": unidentified block\n");

sys/arch/mips/alchemy/dev/aupci.c

165

aprint_error(": unable to map PCI registers\n");

sys/arch/mips/alchemy/dev/aupcmcia.c

226

aprint_error(": unable to get machdep structure\n");

sys/arch/mips/alchemy/dev/aupsc.c

112

aprint_error(": unable to map device registers\n");

sys/arch/mips/alchemy/dev/com_aubus.c

100

aprint_error(": can't map i/o space\n");

sys/arch/mips/atheros/dev/arpci.c

304

aprint_error(": failed to map registers\n");

sys/arch/mips/atheros/dev/arspi.c

184

aprint_error("%s: couldn't establish interrupt\n",

sys/arch/mips/atheros/dev/com_arbus.c

199

aprint_error(": unable to get frequency property\n");

sys/arch/mips/atheros/dev/com_arbus.c

209

aprint_error(": can't map registers\n");

sys/arch/mips/atheros/dev/ehci_arbus.c

106

aprint_error(": failed to map registers: %d\n", error);

sys/arch/mips/atheros/dev/ehci_arbus.c

117

aprint_error(": error: CAPLENGTH (%#x) != 0x40\n", sc->sc_offs);

sys/arch/mips/atheros/dev/ehci_arbus.c

141

aprint_error("%s: init failed, error=%d\n", device_xname(self),

sys/arch/mips/cavium/dev/octeon_cib.c

125

aprint_error(": couldn't map RAW register\n");

sys/arch/mips/cavium/dev/octeon_cib.c

130

aprint_error(": couldn't map EN register\n");

sys/arch/mips/cavium/dev/octeon_cib.c

135

aprint_error(": failed to decode interrupt\n");

sys/arch/mips/cavium/dev/octeon_cib.c

140

aprint_error(": missing 'cavium,max-bits' property\n");

sys/arch/mips/cavium/dev/octeon_cib.c

144

aprint_error(": 'cavium,max-bits' value out of range\n");

sys/arch/mips/cavium/dev/octeon_cib.c

154

aprint_error(": couldn't register with fdtbus: %d\n", error);

sys/arch/mips/cavium/dev/octeon_gpio.c

110

aprint_error(": could not get registers\n");

sys/arch/mips/cavium/dev/octeon_gpio.c

120

aprint_error(": could not map registers\n");

sys/arch/mips/cavium/dev/octeon_intc.c

106

aprint_error(": couldn't register with fdtbus: %d\n", error);

sys/arch/mips/cavium/dev/octeon_smi.c

159

aprint_error(": couldn't get registers\n");

sys/arch/mips/cavium/dev/octeon_smi.c

167

aprint_error(": couldn't map registers\n");

sys/arch/mips/cavium/dev/octeon_uart.c

132

aprint_error(": can't map i/o space\n");

sys/arch/mips/cavium/dev/octeon_xhci.c

100

aprint_error(": couldn't get bridge registers\n");

sys/arch/mips/cavium/dev/octeon_xhci.c

104

aprint_error(": couldn't map bridge registers\n");

sys/arch/mips/cavium/dev/octeon_xhci.c

121

aprint_error(": couldn't find dwc3 child node\n");

sys/arch/mips/cavium/dev/octeon_xhci.c

125

aprint_error(": couldn't get xhci registers\n");

sys/arch/mips/cavium/dev/octeon_xhci.c

129

aprint_error(": couldn't map xhci registers\n");

sys/arch/mips/cavium/dev/octeon_xhci.c

134

aprint_error(": couldn't get refclk-frequency property\n");

sys/arch/mips/cavium/dev/octeon_xhci.c

139

aprint_error(": couldn't get refclk-type-hs property\n");

sys/arch/mips/cavium/dev/octeon_xhci.c

144

aprint_error(": couldn't get refclk-type-ss property\n");

sys/arch/mips/cavium/dev/octeon_xhci.c

348

aprint_error(": no DWC3 core (DWC3_GSNPSID=%08x)\n", val);

sys/arch/mips/ingenic/jziic.c

57

#define DPRINTF aprint_error

sys/arch/mips/ralink/ralink_cfi.c

103

aprint_error("%s: cannot map %#" PRIxBUSSIZE" at offset %#"

sys/arch/mips/ralink/ralink_cfi.c

95

aprint_error("%s: no base address\n", __func__);

sys/arch/mips/ralink/ralink_com.c

333

aprint_error(": can't map registers, error=%d\n", error);

sys/arch/mips/rmi/rmixl_com.c

272

aprint_error(": can't map registers\n");

sys/arch/mips/rmi/rmixl_cpu.c

215

aprint_error(": psb type=%s cpu_wakeup unsupported\n",

sys/arch/mips/rmi/rmixl_cpu.c

226

aprint_error(": failed to hatch\n");

sys/arch/mips/rmi/rmixl_gpio.c

217

aprint_error(": failed to map register %#"

sys/arch/mips/rmi/rmixl_nand.c

113

aprint_error("%s: NAND not yet supported on XLP", __func__);

sys/arch/mips/rmi/rmixl_nand.c

118

aprint_error("%s: NAND not supported on this processor",

sys/arch/mips/rmi/rmixl_usbi.c

124

aprint_error(": USB_DIS set in LOW_PWR_DIS, abort attach\n");

sys/arch/mipsco/obio/asc.c

145

aprint_error(": cannot map registers\n");

sys/arch/mipsco/obio/asc.c

151

aprint_error(": cannot map DMA registers\n");

sys/arch/mipsco/obio/asc.c

158

aprint_error(": failed to create dmamap\n");

sys/arch/mipsco/obio/if_le.c

163

aprint_error(": cannot map registers\n");

sys/arch/mipsco/obio/if_le.c

172

aprint_error(": can't allocate DMA area\n");

sys/arch/mipsco/obio/if_le.c

178

aprint_error(": can't map DMA area\n");

sys/arch/mipsco/obio/if_le.c

184

aprint_error(": can't create DMA map\n");

sys/arch/mipsco/obio/if_le.c

189

aprint_error(": can't load DMA map\n");

sys/arch/mipsco/obio/zs.c

210

aprint_error(": cannot map registers\n");

sys/arch/mmeye/dev/com_mainbus.c

105

aprint_error(": device problem. don't attach.\n");

sys/arch/mmeye/dev/com_mainbus.c

96

aprint_error(": can't map i/o space\n");

sys/arch/mmeye/dev/mmeyepcmcia.c

290

aprint_error(": can't map i/o space\n");

sys/arch/mmeye/dev/wdc_mainbus.c

138

aprint_error(": couldn't map registers\n");

sys/arch/mmeye/dev/wdc_mainbus.c

144

aprint_error(": couldn't subregion registers (3)\n");

sys/arch/mvme68k/dev/if_le.c

181

aprint_error(": Failed to allocate ether buffer\n");

sys/arch/mvme68k/dev/if_le.c

186

aprint_error(": Failed to map ether buffer\n");

sys/arch/news68k/dev/kb_hb.c

98

aprint_error(": can't map device space\n");

sys/arch/news68k/dev/kbc.c

85

aprint_error(": can't map device space\n");

sys/arch/news68k/dev/mkclock_hb.c

89

aprint_error("can't map device space\n");

sys/arch/news68k/dev/ms_hb.c

126

aprint_error(": can't map device space\n");

sys/arch/news68k/dev/si.c

171

aprint_error(": can't map device space\n");

sys/arch/newsmips/apbus/if_sn_ap.c

124

aprint_error(": failed to get MAC address\n");

sys/arch/newsmips/apbus/if_tlp_ap.c

137

aprint_error(": unable to handle your board\n");

sys/arch/newsmips/apbus/mkclock_ap.c

82

aprint_error(": can't map device space\n");

sys/arch/newsmips/apbus/spifi.c

174

aprint_error(": cannot find slave dmac\n");

sys/arch/newsmips/apbus/xafb.c

165

aprint_error(": couldn't initialize device\n");

sys/arch/newsmips/dev/if_le.c

149

aprint_error(": interrupt level not configured\n");

sys/arch/newsmips/dev/if_le.c

173

aprint_error(": unknown LANCE addr\n");

sys/arch/newsmips/dev/mkclock_hb.c

84

aprint_error(": can't map device space\n");

sys/arch/newsmips/dev/sc_wrap.c

85

aprint_error(": interrupt level not configured\n");

sys/arch/newsmips/dev/zs_hb.c

209

aprint_error(": interrupt level not configured\n");

sys/arch/newsmips/dev/zs_hb.c

212

aprint_error(": interrupt level not configured; using");

sys/arch/ofppc/isa/isa_machdep.c

74

aprint_error("Can't map IO_ELCR error %d\n", noerr);

sys/arch/ofppc/ofppc/mainbus.c

174

aprint_error("No openpic support compiled into kernel!");

sys/arch/ofppc/ofppc/mainbus.c

185

aprint_error("Increase OPENPIC_MAX_ISUS to %d\n", i);

sys/arch/ofppc/ofppc/mainbus.c

206

aprint_error("PIC support not present or PIC error\n");

sys/arch/ofppc/ofppc/mainbus.c

349

aprint_error("Unhandled pic node type node=%x\n",

sys/arch/ofppc/ofppc/mainbus.c

83

aprint_error("Incorrectly identified i8259 as prepivr\n");

sys/arch/ofppc/pci/gt_mainbus.c

181

aprint_error(": registers map failed\n");

sys/arch/ofppc/pci/gt_mainbus.c

207

aprint_error(": PCI bus range failed\n");

sys/arch/ofppc/pci/gt_mainbus.c

247

aprint_error(": AGP bus range failed\n");

sys/arch/ofppc/pci/ofwpci.c

228

aprint_error("pci_configure_bus() failed\n");

sys/arch/pmax/tc/asc_ioasic.c

136

aprint_error(": failed to map device registers\n");

sys/arch/pmax/tc/asc_ioasic.c

143

aprint_error(": failed to create DMA map\n");

sys/arch/powerpc/booke/dev/pq3cfi.c

83

aprint_error("%s: no base address\n", __func__);

sys/arch/powerpc/booke/dev/pq3cfi.c

90

aprint_error("%s: cannot map %d at offset %#x, error %d\n", __func__, tmpsize, addr, error);

sys/arch/powerpc/booke/dev/pq3ddrc.c

112

aprint_error(": failed to map registers: %d\n", error);

sys/arch/powerpc/booke/dev/pq3duart.c

208

aprint_error(": failed to map registers: %d\n", error);

sys/arch/powerpc/booke/dev/pq3etsec.c

389

aprint_error(": error mapping registers @ %#x\n",

sys/arch/powerpc/booke/dev/pq3etsec.c

601

aprint_error(": error mapping registers: %d\n", error);

sys/arch/powerpc/booke/dev/pq3etsec.c

630

aprint_error(": mac-address unknown\n");

sys/arch/powerpc/booke/dev/pq3etsec.c

646

aprint_error(": failed to init rxq: %d\n", error);

sys/arch/powerpc/booke/dev/pq3etsec.c

652

aprint_error(": failed to init txq: %d\n", error);

sys/arch/powerpc/booke/dev/pq3etsec.c

659

aprint_error(": failed to allocate rx dmamaps: %d\n", error);

sys/arch/powerpc/booke/dev/pq3etsec.c

666

aprint_error(": failed to allocate tx dmamaps: %d\n", error);

sys/arch/powerpc/booke/dev/pq3etsec.c

673

aprint_error(": failed to establish tx interrupt: %d\n",

sys/arch/powerpc/booke/dev/pq3etsec.c

681

aprint_error(": failed to establish rx interrupt: %d\n",

sys/arch/powerpc/booke/dev/pq3etsec.c

689

aprint_error(": failed to establish error interrupt: %d\n",

sys/arch/powerpc/booke/dev/pq3etsec.c

701

aprint_error(": failed to establish soft interrupt\n");

sys/arch/powerpc/booke/dev/pq3etsec.c

719

aprint_error(": failed to locate mdio device\n");

sys/arch/powerpc/booke/dev/pq3obio.c

190

aprint_error("failed to map registers: %d\n", error);

sys/arch/powerpc/booke/pci/pq3pci.c

479

aprint_error(": failed to create %s bus space: %d\n",

sys/arch/powerpc/booke/pci/pq3pci.c

490

aprint_error(": failed to hole in %s bus space: %d\n",

sys/arch/powerpc/booke/pci/pq3pci.c

531

aprint_error(": invalid inbound window: "

sys/arch/powerpc/booke/pci/pq3pci.c

536

aprint_error(": invalid inbound window: "

sys/arch/powerpc/booke/pci/pq3pci.c

541

aprint_error(": invalid inbound window: "

sys/arch/powerpc/booke/pci/pq3pci.c

547

aprint_error(": invalid inbound window: "

sys/arch/powerpc/booke/pci/pq3pci.c

553

aprint_error(": invalid inbound window: "

sys/arch/powerpc/booke/pci/pq3pci.c

559

aprint_error(": invalid inbound window: "

sys/arch/powerpc/booke/pci/pq3pci.c

707

aprint_error(": missing %s board property", prop_name);

sys/arch/powerpc/booke/pci/pq3pci.c

782

aprint_error(": failed to map registers: %d\n", error);

sys/arch/powerpc/booke/pci/pq3pci.c

889

aprint_error(": error creating inbound window\n");

sys/arch/powerpc/booke/pci/pq3pci.c

900

aprint_error(

sys/arch/powerpc/booke/pci/pq3pci.c

925

aprint_error(

sys/arch/powerpc/ibm4xx/dev/com_opb.c

128

aprint_error(": unable to get clock-frequency property\n");

sys/arch/powerpc/ibm4xx/dev/dwcsata.c

886

aprint_error(": can't map registers\n");

sys/arch/powerpc/ibm4xx/dev/dwctwo_plb.c

102

aprint_error("struct dwc2_core_params not found\n");

sys/arch/powerpc/ibm4xx/dev/ehci_plb.c

163

aprint_error(": can't map registers\n");

sys/arch/powerpc/ibm4xx/dev/mal.c

220

aprint_error("MAL SERR: ESR 0x%08x\n", esr);

sys/arch/powerpc/ibm4xx/dev/mal.c

278

aprint_error("MAL unknown channel no.%d\n", chan);

sys/arch/powerpc/ibm4xx/dev/mal.c

77

aprint_error("%s: unknown pvr 0x%x\n", __func__, pvr);

sys/arch/powerpc/ibm4xx/dev/mal.c

89

aprint_error("%s: Soft reset failed\n", __func__);

sys/arch/powerpc/ibm4xx/dev/ohci_plb.c

118

aprint_error(": can't map registers\n");

sys/arch/powerpc/mpc5200/bestcomm.c

130

aprint_error(": can't map registers\n");

sys/arch/powerpc/mpc5200/cdm.c

255

aprint_error(": can't map registers\n");

sys/arch/powerpc/mpc5200/fec.c

142

aprint_error(": can't map registers\n");

sys/arch/powerpc/mpc5200/fec.c

150

aprint_error(": no MAC address\n");

sys/arch/powerpc/mpc5200/mpc5200_pci.c

278

aprint_error("mpcpci_pci_intr_map: bad interrupt pin %d\n", pin);

sys/arch/powerpc/mpc5200/mpc5200_pci.c

293

aprint_error("mpcpci_pci_intr_map: no mapping for pin %c\n",

sys/arch/powerpc/mpc5200/pic_mpc5200.c

156

aprint_error(": can't map registers\n");

sys/arch/powerpc/mpc5200/psc.c

188

aprint_error(": can't map registers\n");

sys/arch/powerpc/mpc5200/sram.c

109

aprint_error(": can't create arena\n");

sys/arch/powerpc/mpc5200/sram.c

94

aprint_error(": can't map registers\n");

sys/arch/powerpc/oea/cpu_subr.c

1473

aprint_error(": unable to allocate hatch stack\n");

sys/arch/powerpc/oea/cpu_subr.c

1568

aprint_error("%d:CPU %d didn't start %d\n", cpu_spinstart_ack,

sys/arch/powerpc/pci/pci_machdep_common.c

226

aprint_error("pci_intr_map: interrupt pin %d\n", pin);

sys/arch/powerpc/pci/pci_machdep_common.c

231

aprint_error("pci_intr_map: bad interrupt pin %d\n", pin);

sys/arch/powerpc/pci/pci_machdep_common.c

252

aprint_error("pci_intr_map: no mapping for pin %c\n", '@' + pin);

sys/arch/powerpc/pci/pci_machdep_common.c

257

aprint_error("pci_intr_map: bad interrupt line %d\n", line);

sys/arch/powerpc/pci/pci_machdep_ofw.c

305

aprint_error("cannot figure out device num "

sys/arch/powerpc/pci/pci_machdep_ofw.c

446

aprint_error("pci_intr_map: bad interrupt pin %d\n", pin);

sys/arch/powerpc/pci/pci_machdep_ofw.c

461

aprint_error("pci_intr_map: no mapping for pin %c\n",'@' + pin);

sys/arch/powerpc/pci/pci_machdep_ofw.c

543

aprint_error("Cannot find node for device "

sys/arch/powerpc/powerpc/rtas.c

178

aprint_error(": attach failed!\n");

sys/arch/prep/isa/paud_isa.c

157

aprint_error(": attach failed\n");

sys/arch/prep/pci/gten.c

133

aprint_error(": can't determine memory size: error=%d\n",

sys/arch/prep/pci/gten.c

156

aprint_error(": can't map frame buffer: error=%d\n",

sys/arch/prep/pci/gten.c

166

aprint_error(": cannot map framebuffer\n");

sys/arch/prep/pci/pci_machdep.c

213

aprint_error("pci_intr_map: bad interrupt pin %d\n", pin);

sys/arch/prep/pci/pci_machdep.c

242

aprint_error("pci_intr_map: no mapping for pin %c\n",

sys/arch/prep/pci/pci_machdep.c

247

aprint_error("pci_intr_map: bad interrupt line %d\n",

sys/arch/prep/pnpbus/if_we_pnpbus.c

165

aprint_error("%s: can't map nic i/o space\n",

sys/arch/prep/pnpbus/if_we_pnpbus.c

172

aprint_error("%s: can't subregion i/o space\n",

sys/arch/prep/pnpbus/if_we_pnpbus.c

180

aprint_error("%s: where did the card go?\n",

sys/arch/prep/pnpbus/if_we_pnpbus.c

192

aprint_error("%s: can't map shared memory\n",

sys/arch/prep/pnpbus/if_we_pnpbus.c

252

aprint_error("%s: can't establish interrupt\n",

sys/arch/prep/pnpbus/mcclock_pnpbus.c

109

aprint_error(": couldn't map clock I/O space\n");

sys/arch/prep/pnpbus/nvram_pnpbus.c

142

aprint_error("nvram: couldn't map registers\n");

sys/arch/prep/pnpbus/wdc_pnpbus.c

121

aprint_error(": couldn't subregion registers\n");

sys/arch/prep/prep/platform.c

316

aprint_error("Couldn't find PNP data for bus %d devfunc 0x%x\n",

sys/arch/riscv/dev/plic_fdt.c

173

aprint_error(": couldn't get registers\n");

sys/arch/riscv/dev/plic_fdt.c

180

aprint_error(": couldn't get registers\n");

sys/arch/riscv/dev/plic_fdt.c

185

aprint_error(": couldn't map registers\n");

sys/arch/riscv/dev/plic_fdt.c

191

aprint_error("couldn't get supported number of external "

sys/arch/riscv/dev/plic_fdt.c

196

aprint_error(": invalid number of external interrupts (%u)\n",

sys/arch/riscv/dev/plic_fdt.c

254

aprint_error(": couldn't register with fdtbus: %d\n", error);

sys/arch/riscv/fdt/clint_fdt.c

163

aprint_error(": couldn't get registers\n");

sys/arch/riscv/fdt/clint_fdt.c

169

aprint_error(": couldn't get 'cpus' node\n");

sys/arch/riscv/fdt/clint_fdt.c

176

aprint_error(": can't get timebase frequency\n");

sys/arch/riscv/fdt/clint_fdt.c

185

aprint_error(": couldn't map registers\n");

sys/arch/riscv/fdt/cpu_fdt.c

101

aprint_error("Unexpected error (%ld) from get_status",

sys/arch/riscv/fdt/cpu_fdt.c

127

aprint_error("%s: no /cpus node found\n", __func__);

sys/arch/riscv/fdt/cpu_fdt.c

159

aprint_error("%s: failed to enable CPU %#lx\n",

sys/arch/riscv/fdt/cpu_fdt.c

172

aprint_error("hart%ld: WARNING: AP %u failed to start\n",

sys/arch/riscv/fdt/cpu_fdt.c

72

aprint_error("%s: no /cpus node found\n", __func__);

sys/arch/riscv/fdt/cpu_fdt.c

88

aprint_error("hart id too big %lu (%u)", hartid,

sys/arch/riscv/fdt/cpu_fdt.c

96

aprint_error("Unknown hart id %lx", hartid);

sys/arch/riscv/fdt/cpus_fdt.c

51

aprint_error(": can't get timebase frequency\n");

sys/arch/riscv/fdt/intc_fdt.c

330

aprint_error(": couldn't register with fdtbus: %d\n", error);

sys/arch/riscv/fdt/pcihost_fdt.c

119

aprint_error(": couldn't get registers\n");

sys/arch/riscv/fdt/pcihost_fdt.c

131

aprint_error(": couldn't map registers: %d\n", error);

sys/arch/riscv/sifive/fu540_ccache.c

150

aprint_error(": couldn't get registers\n");

sys/arch/riscv/sifive/fu540_ccache.c

159

aprint_error(": couldn't map registers\n");

sys/arch/riscv/sifive/fu540_ccache.c

167

aprint_error(": can't get cache-block-size\n");

sys/arch/riscv/sifive/fu540_ccache.c

174

aprint_error(": can't get cache-level\n");

sys/arch/riscv/sifive/fu540_ccache.c

181

aprint_error(": can't get cache-sets\n");

sys/arch/riscv/sifive/fu540_ccache.c

187

aprint_error(": can't get cache-size\n");

sys/arch/riscv/sifive/fu540_ccache.c

192

aprint_error(": can't get cache-unified\n");

sys/arch/riscv/sifive/fu540_prci.c

234

aprint_error(": couldn't get registers\n");

sys/arch/riscv/sifive/fu540_prci.c

241

aprint_error(": couldn't map registers\n");

sys/arch/riscv/sifive/fu540_prci.c

247

aprint_error(": couldn't get hfclk\n");

sys/arch/riscv/sifive/fu540_prci.c

254

aprint_error(": couldn't get rtcclk\n");

sys/arch/riscv/starfive/jh7100_clkc.c

474

aprint_error(": couldn't get registers\n");

sys/arch/riscv/starfive/jh7100_clkc.c

483

aprint_error(": couldn't map registers\n");

sys/arch/riscv/starfive/jh7100_clkc.c

494

aprint_error(": couldn't get osc_sys\n");

sys/arch/riscv/starfive/jh7100_clkc.c

501

aprint_error(": couldn't get osc_aud\n");

sys/arch/riscv/starfive/jh7100_gmac.c

144

aprint_error(": failed to decode interrupt\n");

sys/arch/riscv/starfive/jh7100_pinctrl.c

448

aprint_error(": no gpio controller\n");

sys/arch/riscv/starfive/jh7100_pinctrl.c

454

aprint_error(": couldn't map gpio registers\n");

sys/arch/riscv/starfive/jh7100_pinctrl.c

459

aprint_error(": couldn't map padctl registers\n");

sys/arch/riscv/starfive/jh7110_clkc.c

1106

aprint_error(": couldn't get registers\n");

sys/arch/riscv/starfive/jh7110_clkc.c

1114

aprint_error(": couldn't map registers\n");

sys/arch/riscv/starfive/jh7110_eqos.c

149

aprint_error(": failed to decode interrupt\n");

sys/arch/riscv/starfive/jh7110_pcie.c

598

aprint_error(": couldn't get apb registers\n");

sys/arch/riscv/starfive/jh7110_pcie.c

603

aprint_error(": couldn't get cfg registers\n");

sys/arch/riscv/starfive/jh7110_pcie.c

611

aprint_error(": can't map APB registers\n");

sys/arch/riscv/starfive/jh7110_pcie.c

617

aprint_error(": can't map CFG registers\n");

sys/arch/riscv/starfive/jh7110_pcie.c

625

aprint_error(": couldn't get '%s' property\n", stgsyscon);

sys/arch/riscv/starfive/jh7110_pcie.c

630

aprint_error(": incorrect '%s' data (len = %u)\n", stgsyscon,

sys/arch/riscv/starfive/jh7110_pcie.c

639

aprint_error(": couldn't get '%s' (%d)\n", stgsyscon,

sys/arch/riscv/starfive/jh7110_pcie.c

647

aprint_error(": couldn't get 'perst-gpios'");

sys/arch/riscv/starfive/jh7110_pcie.c

659

aprint_error(": unknown controller at 0x%lx\n",

sys/arch/riscv/starfive/jh7110_pcie.c

685

aprint_error(": failed to decode interrupt\n");

sys/arch/riscv/starfive/jh7110_pciephy.c

120

aprint_error(": couldn't get registers\n");

sys/arch/riscv/starfive/jh7110_pciephy.c

125

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr,

sys/arch/riscv/starfive/jh7110_pinctrl.c

722

aprint_error(": couldn't get registers\n");

sys/arch/riscv/starfive/jh7110_pinctrl.c

728

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr,

sys/arch/riscv/starfive/jh7110_syscon.c

126

aprint_error(": couldn't get registers\n");

sys/arch/riscv/starfive/jh7110_syscon.c

132

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr,

sys/arch/riscv/starfive/jh7110_trng.c

330

aprint_error(": couldn't get registers\n");

sys/arch/riscv/starfive/jh7110_trng.c

336

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr,

sys/arch/riscv/starfive/jh7110_trng.c

344

aprint_error(": couldn't enable 'hclk' clock\n");

sys/arch/riscv/starfive/jh7110_trng.c

351

aprint_error(": couldn't enable 'ahb' clock\n");

sys/arch/riscv/starfive/jh7110_trng.c

359

aprint_error(": couldn't de-assert reset\n");

sys/arch/riscv/starfive/jh71x0_eth.c

105

aprint_error(": couldn't get 'starfive,syscon' property\n");

sys/arch/riscv/starfive/jh71x0_eth.c

109

aprint_error(": incorrect syscon data (len = %u)\n",

sys/arch/riscv/starfive/jh71x0_eth.c

119

aprint_error(": couldn't get syscon\n");

sys/arch/riscv/starfive/jh71x0_eth.c

127

aprint_error(": couldn't map registers\n");

sys/arch/riscv/starfive/jh71x0_eth.c

136

aprint_error(": couldn't enable clock #%d\n", n);

sys/arch/riscv/starfive/jh71x0_eth.c

144

aprint_error(": couldn't de-assert reset #%d\n", n);

sys/arch/riscv/starfive/jh71x0_eth.c

162

aprint_error(": unsupported phy-mode '%s'\n", phy_mode);

sys/arch/riscv/starfive/jh71x0_eth.c

97

aprint_error(": couldn't get registers\n");

sys/arch/riscv/starfive/jh71x0_temp.c

133

aprint_error(": couldn't get registers\n");

sys/arch/riscv/starfive/jh71x0_temp.c

143

aprint_error(": couldn't map %#" PRIxBUSADDR ": %d", addr,

sys/arch/riscv/starfive/jh71x0_temp.c

154

aprint_error(": couldn't enable clock '%s'\n", cr);

sys/arch/riscv/starfive/jh71x0_temp.c

159

aprint_error(": couldn't get reset '%s'\n", cr);

sys/arch/riscv/starfive/jh71x0_temp.c

164

aprint_error(": couldn't de-assert reset '%s'\n", cr);

sys/arch/riscv/starfive/jh71x0_usb.c

211

aprint_error(": couldn't get '%s' property\n",

sys/arch/riscv/starfive/jh71x0_usb.c

216

aprint_error(": incorrect syscon data (len = %u)\n",

sys/arch/riscv/starfive/jh71x0_usb.c

226

aprint_error(": couldn't get syscon\n");

sys/arch/rs6000/ioplanar/com_iop.c

115

aprint_error(": can't map i/o space\n");

sys/arch/rs6000/rs6000/machdep.c

346

aprint_error("WARNING: increase MAX_BUCS to at least %d\n",

sys/arch/sandpoint/isa/mcclock_isa.c

217

aprint_error(": can't map registers!\n");

sys/arch/sandpoint/pci/pci_machdep.c

247

aprint_error("pci_intr_map: bad interrupt pin %d\n", pin);

sys/arch/sandpoint/pci/pci_machdep.c

266

aprint_error("pci_intr_map: no mapping for pin %c\n",

sys/arch/sandpoint/pci/pci_machdep.c

301

aprint_error("pci_intr_map: bad interrupt line %d,%c\n",

sys/arch/sandpoint/pci/pci_machdep.c

325

aprint_error("pci_intr_map: bad interrupt line %d,%c\n",

sys/arch/sandpoint/sandpoint/flash_cfi.c

81

aprint_error("%s: cannot map %d at offset %#x, error %d\n",

sys/arch/sandpoint/sandpoint/nhpow.c

143

aprint_error(": could not map error %d\n", i);

sys/arch/sbmips/sbmips/cpu.c

150

aprint_error(": CFE call to start failed: %d\n",

sys/arch/sbmips/sbmips/cpu.c

159

aprint_error(": failed to hatch!\n");

sys/arch/sgimips/dev/crmfb.c

1784

aprint_error("crmfb: crmfb_wait_dma_idle timed out\n");

sys/arch/sgimips/dev/crmfb.c

859

aprint_error("crmfb_wait_idle() timed out\n");

sys/arch/sgimips/dev/crmfb.c

945

aprint_error("crmfb: crmfb_wait_dma_idle timed out\n");

sys/arch/sgimips/dev/zs.c

226

aprint_error(": unable to map 85c30 registers, error = %d\n",

sys/arch/sgimips/hpc/button.c

101

aprint_error(": unable to map button register\n");

sys/arch/sgimips/hpc/haltwo.c

306

aprint_error(": unable to map control registers\n");

sys/arch/sgimips/hpc/haltwo.c

312

aprint_error(": unable to map volume registers\n");

sys/arch/sgimips/hpc/haltwo.c

318

aprint_error(": unable to map DMA registers\n");

sys/arch/sgimips/hpc/haltwo.c

331

aprint_error(": unable to establish interrupt\n");

sys/arch/sgimips/hpc/haltwo.c

341

aprint_error(

sys/arch/sgimips/hpc/haud.c

819

aprint_error(": unable to map HPC registers\n");

sys/arch/sgimips/hpc/haud.c

825

aprint_error(": unable to map SRAM\n");

sys/arch/sgimips/hpc/haud.c

832

aprint_error(": unable to establish soft interrupt\n");

sys/arch/sgimips/hpc/haud.c

837

aprint_error(": unable to establish hw interrupt\n");

sys/arch/sgimips/hpc/pi1ppc.c

185

aprint_error(": unable to map control registers\n");

sys/arch/sgimips/ioc/if_le_oioc.c

167

aprint_error(": failed to obtain MAC address\n");

sys/arch/sgimips/ioc/if_le_oioc.c

194

aprint_error(": failed to allocate ioc<->lance buffer space, "

sys/arch/sgimips/ioc/if_le_oioc.c

216

aprint_error(": failed to establish interrupt %d\n",oa->oa_irq);

sys/arch/sgimips/mace/if_mec.c

444

aprint_error(": can't map i/o space\n");

sys/arch/sgimips/mace/if_mec.c

458

aprint_error(": unable to allocate control data, error = %d\n",

sys/arch/sgimips/mace/if_mec.c

473

aprint_error(": unable to map control data, error = %d\n", err);

sys/arch/sgimips/mace/if_mec.c

481

aprint_error(": unable to create control data DMA map,"

sys/arch/sgimips/mace/if_mec.c

488

aprint_error(": unable to load control data DMA map,"

sys/arch/sgimips/mace/if_mec.c

498

aprint_error(": unable to create tx DMA map %d,"

sys/arch/sgimips/mace/if_mec.c

508

aprint_error(": unable to get MAC address!\n");

sys/arch/sgimips/mace/lpt_mace.c

95

aprint_error(": can't map i/o space\n");

sys/arch/sgimips/mace/macekbc.c

134

aprint_error("%s: couldn't map kbd registers\n",

sys/arch/sgimips/mace/macekbc.c

140

aprint_error("%s: couldn't map aux registers\n",

sys/arch/sparc/dev/apc.c

84

aprint_error(": cannot map registers\n");

sys/arch/sparc/dev/com_ebus.c

112

aprint_error(": unable to map device registers\n");

sys/arch/sparc/dev/com_obio.c

196

aprint_error(": can't map registers\n");

sys/arch/sparc/dev/dma_obio.c

89

aprint_error(": cannot map registers\n");

sys/arch/sparc/dev/esp_obio.c

152

aprint_error(": cannot map registers\n");

sys/arch/sparc/dev/if_le_obio.c

146

aprint_error(": cannot map registers\n");

sys/arch/sparc/dev/if_le_obio.c

153

aprint_error(": DMA map create error %d\n", error);

sys/arch/sparc/dev/if_le_obio.c

160

aprint_error(": DMA memory allocation error %d\n", error);

sys/arch/sparc/dev/if_le_obio.c

166

aprint_error(": DMA memory map error %d\n", error);

sys/arch/sparc/dev/if_le_obio.c

172

aprint_error(": DMA buffer map load error %d\n", error);

sys/arch/sparc/dev/ms_pckbport.c

119

aprint_error("%s: reset error\n", __func__);

sys/arch/sparc/dev/ms_pckbport.c

132

aprint_error("%s: failed to disable interrupts\n", __func__);

sys/arch/sparc/dev/pckbc_js.c

177

aprint_error(": cnattach %d", status);

sys/arch/sparc/dev/pckbc_js.c

187

aprint_error(": unable to map data register\n");

sys/arch/sparc/dev/pckbc_js.c

193

aprint_error(": unable to map cmd register\n");

sys/arch/sparc/dev/pckbc_js.c

208

aprint_error(": unable to request self test");

sys/arch/sparc/dev/pckbc_js.c

216

aprint_error(": selftest failed (0x%02x)",

sys/arch/sparc/dev/sw.c

262

aprint_error(": cannot map registers\n");

sys/arch/sparc/dev/zs.c

268

aprint_error(": no interrupt lines\n");

sys/arch/sparc/dev/zs.c

285

aprint_error(": cannot map zs registers\n");

sys/arch/sparc/dev/zs.c

321

aprint_error(": cannot map zs registers\n");

sys/arch/sparc/dev/zs.c

358

aprint_error(": no interrupt lines\n");

sys/arch/sparc/dev/zs.c

370

aprint_error(": cannot map zs registers\n");

sys/arch/sparc/dev/zs.c

401

aprint_error(": configuration incomplete\n");

sys/arch/sparc/dev/zs.c

408

aprint_error(": cannot establish soft int handler\n");

sys/arch/sparc/sparc/clkctrl.c

70

aprint_error("unable to attach more than once\n");

sys/arch/sparc/sparc/clkctrl.c

77

aprint_error("unable to map register\n");

sys/arch/sparc/sparc/cpu.c

590

aprint_error("%s: mi_cpu_attach failed with %d\n",

sys/arch/sparc/sparc/cpu.c

865

aprint_error("%s\n", errbuf);

sys/arch/sparc/sparc/mkclock.c

158

aprint_error(": can't map register\n");

sys/arch/sparc/sparc/mkclock.c

183

aprint_error(": can't map register\n");

sys/arch/sparc/sparc/mkclock.c

201

aprint_error(": can't map register\n");

sys/arch/sparc/sparc/mkclock.c

224

aprint_error(": can't map register\n");

sys/arch/sparc/sparc/oclock.c

129

aprint_error(": can't map register\n");

sys/arch/sparc64/dev/bq4802_ebus.c

116

aprint_error(": can't map register\n");

sys/arch/sparc64/dev/com_ebus.c

137

aprint_error(": can't map register space\n");

sys/arch/sparc64/dev/com_ebus.c

194

aprint_error("Error: comcnattach failed\n");

sys/arch/sparc64/dev/ebus.c

212

aprint_error("ebus_attach: %s: incomplete\n", name);

sys/arch/sparc64/dev/fire_i2c.c

119

aprint_error(": register count error (%d != 1)\n",

sys/arch/sparc64/dev/fire_i2c.c

124

aprint_error(": register length error (%" PRId64 " < %d\n",

sys/arch/sparc64/dev/fire_i2c.c

131

aprint_error(": failed to map registers\n");

sys/arch/sparc64/dev/gfb.c

139

aprint_error("%s: can't find the fb range\n",

sys/arch/sparc64/dev/gfb.c

155

aprint_error("%s: not set up by firmware, can't continue.\n",

sys/arch/sparc64/dev/jbus-i2c.c

124

aprint_error(": failed to map registers\n");

sys/arch/sparc64/dev/lom.c

273

aprint_error(": no interrupt\n");

sys/arch/sparc64/dev/lom.c

283

aprint_error(": can't map register space\n");

sys/arch/sparc64/dev/lom.c

298

aprint_error(": not responding\n");

sys/arch/sparc64/dev/lpt_ebus.c

98

aprint_error(": can't map register space\n");

sys/arch/sparc64/dev/mkclock.c

185

aprint_error(": can't map register\n");

sys/arch/sparc64/dev/mkclock.c

215

aprint_error(": can't map register\n");

sys/arch/sparc64/dev/mkclock.c

237

aprint_error(": can't map register\n");

sys/arch/sparc64/dev/pcf8591_envctrl.c

139

aprint_error(": couldn't find \"thermisters\" property\n");

sys/arch/sparc64/dev/pcf8591_envctrl.c

145

aprint_error(": couldn't find \"cpu-temp-factors\" property\n");

sys/arch/sparc64/dev/pckbc_ebus.c

110

aprint_error(": no intr %d", ea->ea_nintr);

sys/arch/sparc64/dev/pckbc_ebus.c

121

aprint_error("\n");

sys/arch/sparc64/dev/pckbc_ebus.c

137

aprint_error(": cnattach %d", status);

sys/arch/sparc64/dev/pckbc_ebus.c

147

aprint_error(": unable to map data register\n");

sys/arch/sparc64/dev/pckbc_ebus.c

153

aprint_error(": unable to map cmd register\n");

sys/arch/sparc64/dev/pckbc_ebus.c

168

aprint_error(": unable to request self test");

sys/arch/sparc64/dev/pckbc_ebus.c

176

aprint_error(": selftest failed (0x%02x)",

sys/arch/sparc64/dev/pckbc_ebus.c

207

aprint_error(": unable to map PMU cmd register\n");

sys/arch/sparc64/dev/pckbc_ebus.c

212

aprint_error(": unable to map PMU data register\n");

sys/arch/sparc64/dev/pckbc_ebus.c

219

aprint_error("failed to establish tadpmu interrupt\n");

sys/arch/sparc64/dev/rtc.c

149

aprint_error(": can't map register\n");

sys/arch/sparc64/dev/schizo.c

170

aprint_error(": failed to map registers\n");

sys/arch/sparc64/dev/schizo.c

201

aprint_error(": failed to map interrupt registers\n");

sys/arch/sparc64/dev/schizo.c

214

aprint_error(": failed to map ichip registers\n");

sys/arch/sparc64/dev/tadpmu.c

518

aprint_error(

sys/arch/sparc64/dev/tadpmu.c

525

aprint_error(

sys/arch/sparc64/dev/tadpmu.c

532

aprint_error(

sys/arch/sparc64/dev/wb_ebus.c

75

aprint_error(": can't map register space\n");

sys/arch/sparc64/dev/zs.c

226

aprint_error(": no interrupt lines\n");

sys/arch/sparc64/dev/zs.c

254

aprint_error(": cannot map registers\n");

sys/arch/sparc64/dev/zs.c

285

aprint_error(": no interrupt lines\n");

sys/arch/sparc64/dev/zs.c

314

aprint_error(": cannot map registers\n");

sys/arch/sparc64/dev/zs.c

342

aprint_error(": configuration incomplete\n");

sys/arch/sun2/dev/zs.c

159

aprint_error(": configuration incomplete\n");

sys/arch/sun3/dev/bw2.c

237

aprint_error("%s: bad p4id=0x%x\n", fb->fb_name, p4id);

sys/arch/sun3/dev/dma.c

107

aprint_error(": can't map register\n");

sys/arch/sun3/dev/dma.c

115

aprint_error(": can't create DMA map\n");

sys/arch/sun3/dev/esp.c

142

aprint_error(": can't map register\n");

sys/arch/sun3/dev/if_ie.c

333

aprint_error(": RAM CONFIG FAILED!\n");

sys/arch/sun3/dev/si_obio.c

168

aprint_error(": can't map register\n");

sys/arch/sun3/dev/si_obio.c

175

aprint_error(": can't create DMA map\n");

sys/arch/sun3/dev/si_vme.c

184

aprint_error(": can't map register\n");

sys/arch/sun3/dev/si_vme.c

191

aprint_error(": can't create DMA map\n");

sys/arch/sun3/dev/xd.c

482

aprint_error(": couldn't read controller params\n");

sys/arch/sun3/dev/xd.c

488

aprint_error(": %s: ",

sys/arch/sun3/dev/xd.c

490

aprint_error(": doesn't identify as a 753/7053\n");

sys/arch/sun3/dev/xy.c

385

aprint_error(": can't alloc IOPB mem in 64K\n");

sys/arch/sun3/dev/xy.c

422

aprint_error(": %s: ", xyc_e2str(err));

sys/arch/sun3/dev/xy.c

423

aprint_error(": doesn't identify as a 450/451\n");

sys/arch/sun3/sun3/clock.c

163

aprint_error(": can't map registers\n");

sys/arch/sun3/sun3x/clock.c

208

aprint_error(": can't map registers\n");

sys/arch/sun3/sun3x/clock.c

291

aprint_error(": can't map device space\n");

sys/arch/usermode/dev/if_veth.c

112

aprint_error(": couldn't open %s: %d\n",

sys/arch/usermode/dev/if_veth.c

118

aprint_error(": couldn't parse hw address '%s'\n",

sys/arch/usermode/dev/ld_thunkbus.c

108

aprint_error(": couldn't open %s: %d\n", path, thunk_geterrno());

sys/arch/usermode/dev/ld_thunkbus.c

112

aprint_error(": couldn't stat %s: %d\n", path, thunk_geterrno());

sys/arch/usermode/dev/vatapi.c

134

aprint_error(": error %d opening path\n", thunk_geterrno());

sys/arch/vax/if/if_le_vsbus.c

224

aprint_error(": unable to alloc buffer block: err %d\n", err);

sys/arch/vax/if/if_le_vsbus.c

231

aprint_error(": unable to map buffer block: err %d\n", err);

sys/arch/vax/if/if_le_vsbus.c

237

aprint_error(": unable to create DMA map: err %d\n", err);

sys/arch/vax/if/if_le_vsbus.c

243

aprint_error(": unable to load DMA map: err %d\n", err);

sys/arch/vax/if/if_ze.c

144

aprint_error(": failed to map %#lx: %d\n", sd->sd_addr, error);

sys/arch/vax/uba/uba_sbi.c

358

aprint_error(

sys/arch/vax/uba/uba_sbi.c

364

aprint_error(

sys/arch/vax/vax/ka820.c

317

aprint_error(": failed self test\n");

sys/arch/vax/vsa/asc_vsbus.c

194

aprint_error(": failed to map registers: error=%d\n", error);

sys/arch/vax/vsa/asc_vsbus.c

200

aprint_error(": failed to map ncr registers: error=%d\n",

sys/arch/vax/vsa/asc_vsbus.c

208

aprint_error(": failed to map adr register: error=%d\n",

sys/arch/vax/vsa/asc_vsbus.c

215

aprint_error(": failed to map dir register: error=%d\n",

sys/arch/vax/vsa/gpx.c

369

aprint_error(": can not map frame buffer registers\n");

sys/arch/vax/vsa/gpx.c

376

aprint_error(": can not map RAMDAC\n");

sys/arch/vax/vsa/gpx.c

385

aprint_error(": can not map cursor chip\n");

sys/arch/vax/vsa/gpx.c

391

aprint_error(": initialization failed\n");

sys/arch/vax/vsa/hdc9224.c

416

aprint_error("%i: %x\n", i, g[i]);

sys/arch/vax/vsa/smg.c

313

aprint_error(": can not map frame buffer\n");

sys/arch/vax/vsa/smg.c

321

aprint_error(": can not map cursor chip\n");

sys/arch/vax/vsa/smg.c

329

aprint_error(": initialization failed\n");

sys/arch/virt68k/dev/gfpic_mainbus.c

68

aprint_error(": couldn't map registers\n");

sys/arch/virt68k/dev/gfrtc_mainbus.c

132

aprint_error(": couldn't map registers\n");

sys/arch/virt68k/dev/gftty_mainbus.c

73

aprint_error(": couldn't map registers\n");

sys/arch/virt68k/dev/virtctrl.c

106

aprint_error(": couldn't map registers\n");

sys/arch/virt68k/dev/virtio_mainbus.c

92

aprint_error(": can't map i/o space\n");

sys/arch/virt68k/virt68k/clock.c

177

aprint_error("Cannot get %d Hz clock; using 100 Hz\n", hz);

sys/arch/virt68k/virt68k/clock.c

189

aprint_error("Cannot get %d Hz statclock; "

sys/arch/x68k/dev/com_intio.c

108

aprint_error(": can't map I/O space\n");

sys/arch/x68k/dev/com_intio.c

114

aprint_error(": invalid intr vector (0x%02x)\n", ia->ia_intr);

sys/arch/x68k/dev/fd.c

656

aprint_error("%s: WARNING!! malloc() failed.\n", __func__);

sys/arch/x68k/dev/spc.c

99

aprint_error(": can't map i/o space\n");

sys/arch/x86/acpi/acpi_wakeup.c

224

aprint_error("acpi0: S4 not supported\n");

sys/arch/x86/acpi/acpi_wakeup.c

237

aprint_error("acpi0: failed to enter S%d\n", state);

sys/arch/x86/acpi/acpi_wakeup.c

485

aprint_error("WARNING: hw.acpi.sleep.vbios=2 "

sys/arch/x86/pci/amdpcib_hpet.c

91

aprint_error(": failed to get address\n");

sys/arch/x86/pci/amdpcib_hpet.c

99

aprint_error(": failed to map mem space\n");

sys/arch/x86/pci/dwiic_pci.c

239

aprint_error(": can't map register space\n");

sys/arch/x86/pci/dwiic_pci.c

262

aprint_error(" at %s", intrstr);

sys/arch/x86/pci/dwiic_pci.c

263

aprint_error("\n");

sys/arch/x86/pci/ichlpcib_hpet.c

82

aprint_error(": failed to map mem space\n");

sys/arch/x86/pci/msipic.c

730

aprint_error("detect an illegal device! "

sys/arch/x86/pci/pci_addr_fixup.c

115

aprint_error("WARNING: can't reserve area for %s.\n",

sys/arch/x86/pci/pci_addr_fixup.c

177

aprint_error("WARNING: unknown PCI device header.");

sys/arch/x86/pci/pci_addr_fixup.c

299

aprint_error("fixup failed. (new address=%#x)\n", (unsigned)*addr);

sys/arch/x86/pci/pci_ranges.c

898

aprint_error("%s: could not create PCI MMIO "

sys/arch/x86/pci/pci_ranges.c

901

aprint_error("%s: could not create PCI BIOS memory "

sys/arch/x86/pci/pci_ranges.c

905

aprint_error("%s: could not record PCI BIOS memory "

sys/arch/x86/pci/pci_ranges.c

909

aprint_error("%s: could not record PCI BIOS memory "

sys/arch/x86/pci/pci_ranges.c

915

aprint_error("%s: could not record PCI memory min & max\n",

sys/arch/x86/pci/pci_ranges.c

918

aprint_error("%s: could not create PCI I/O "

sys/arch/x86/pci/pci_ranges.c

921

aprint_error("%s: could not create PCI BIOS I/O "

sys/arch/x86/pci/pci_ranges.c

925

aprint_error("%s: could not record PCI BIOS I/O "

sys/arch/x86/pci/pci_ranges.c

929

aprint_error("%s: could not record PCI BIOS I/O "

sys/arch/x86/pci/pci_ranges.c

935

aprint_error("%s: could not record PCI I/O min & max\n",

sys/arch/x86/pci/pci_ranges.c

938

aprint_error("%s: could not create PCI resources dictionary\n",

sys/arch/x86/pci/pci_ranges.c

942

aprint_error("%s: could not record PCI memory- or I/O-"

sys/arch/x86/pci/tcpcib.c

237

aprint_error(", locked\n");

sys/arch/x86/pci/tcpcib.c

251

aprint_error(", unable to register wdog timer\n");

sys/arch/x86/x86/bios32.c

152

aprint_error("BIOS32 entry point outside "

sys/arch/x86/x86/bios32.c

217

aprint_error("BIOS32: entry point for service %c%c%c%c is "

sys/arch/x86/x86/cpu.c

1164

aprint_error("mp_cpu_start: CPU does not have APIC\n");

sys/arch/x86/x86/cpu.c

356

aprint_error(": too many CPUs, please use NetBSD/amd64\n");

sys/arch/x86/x86/cpu.c

358

aprint_error(": too many CPUs\n");

sys/arch/x86/x86/cpu.c

369

aprint_error(": multiprocessor boot disabled\n");

sys/arch/x86/x86/cpu_ucode_amd.c

253

aprint_error("ucode: wrong file magic\n");

sys/arch/x86/x86/cpu_ucode_amd.c

262

aprint_error("ucode: missing equivalence table\n");

sys/arch/x86/x86/cpu_ucode_amd.c

280

aprint_error("ucode: No patch available for this cpu\n");

sys/arch/x86/x86/genfb_machdep.c

130

aprint_error("x86_genfb_cnattach: couldn't map framebuffer\n");

sys/arch/x86/x86/genfb_machdep.c

136

aprint_error("x86_genfb_cnattach: couldn't get fb vaddr\n");

sys/arch/x86/x86/hyperv.c

252

aprint_error("Hyper-V: reference TSC page allocation failed\n");

sys/arch/x86/x86/hyperv.c

258

aprint_error("Hyper-V: reference TSC page setup failed\n");

sys/arch/x86/x86/hyperv.c

720

aprint_error("Hyper-V: Hypercall setup failed\n");

sys/arch/x86/x86/identcpu.c

1080

aprint_error("WARNING: BUGGY CYRIX CACHE\n");

sys/arch/x86/x86/ioapic.c

276

aprint_error(": duplicate apic id (ignored)\n");

sys/arch/x86/x86/ioapic.c

286

aprint_error(": map failed\n");

sys/arch/x86/x86/ioapic.c

313

aprint_error(": failed to read version/size\n");

sys/arch/x86/x86/mpacpi.c

1089

aprint_error("%s: mpacpi_findintr_linkdev:"

sys/arch/x86/x86/mpbios.c

1262

aprint_error("oops: multiple isa busses?\n");

sys/arch/x86/x86/mpbios.c

1385

aprint_error("mpbios: can't find ioapic by"

sys/arch/x86/x86/mpbios.c

1394

aprint_error("mpbios: can't find ioapic %d\n", id);

sys/arch/x86/x86/tsc.c

240

aprint_error("ERROR: %lld cycle TSC drift observed\n",

sys/arch/x86/x86/x86_autoconf.c

249

aprint_error("%s: unable to read block %"

sys/arch/x86/x86/x86_ipmi.c

130

aprint_error("%s: unknown register spacing\n", __func__);

sys/arch/xen/x86/cpu.c

1025

aprint_error(": context initialisation failed. errno = %d\n", hyperror);

sys/arch/xen/x86/cpu.c

1033

aprint_error(": VCPUOP_down hypervisor command failed. errno = %d\n", hyperror);

sys/arch/xen/x86/cpu.c

1038

aprint_error(": VCPUOP_up hypervisor command failed. errno = %d\n", hyperror);

sys/arch/xen/x86/cpu.c

1043

aprint_error(": did not come up\n");

sys/arch/xen/xen/hypervisor.c

308

aprint_error("Xen HVM: hypercall page not working\n");

sys/arch/xen/xen/hypervisor.c

321

aprint_error(

sys/arch/xen/xen/hypervisor.c

336

aprint_error(

sys/arch/xen/xen/hypervisor.c

353

aprint_error("Xen HVM: XENFEAT_hvm_callback_vector"

sys/arch/xen/xen/hypervisor.c

406

aprint_error(

sys/arch/xen/xen/hypervisor.c

440

aprint_error(

sys/arch/xen/xen/if_xennet_xenbus.c

1393

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/arch/xen/xen/pciback.c

411

aprint_error("pciback_pci_init: syntax error at %s\n", pcidevs);

sys/arch/xen/xen/pciback.c

441

aprint_error("pciback_pci_init: syntax error at char %c\n", *c);

sys/arch/xen/xen/pciback.c

456

aprint_error("pciback: can' read %s/frontend-id: %d\n",

sys/arch/xen/xen/pciback.c

487

aprint_error("pciback: can' read %s/num_devs %d\n",

sys/arch/xen/xen/pciback.c

496

aprint_error("pciback: can' read %s/%s: %d\n",

sys/arch/xen/xen/pciback.c

591

aprint_error("pciback: can't map shared grant ref\n");

sys/arch/xen/xen/pciback.c

624

aprint_error("pciback: invalid frontend state %d\n",

sys/arch/xen/xen/pciback.c

661

aprint_error("pciback: can't parse %s\n", val);

sys/arch/xen/xen/pciback.c

666

aprint_error("pciback: can't locate 0x%02x:0x%02x.0x%02x\n",

sys/arch/xen/xen/pciback.c

671

aprint_error("pciback: 0x%02x:0x%02x.0x%02x not detected\n",

sys/arch/xen/xen/pciback.c

699

aprint_error("pciback: can't write to %s/%s: "

sys/arch/xen/xen/pciback.c

710

aprint_error("pciback: can't write to %s/root_num: "

sys/arch/xen/xen/pciback.c

731

aprint_error("pciback: domain %d != 0", op->domain);

sys/arch/xen/xen/pciback.c

767

aprint_error("pciback: bad size %d\n", op->size);

sys/arch/xen/xen/pciback.c

787

aprint_error("pciback: bad size %d\n", op->size);

sys/arch/xen/xen/pciback.c

793

aprint_error("pciback: unknown cmd %d\n", op->cmd);

sys/arch/xen/xen/shutdown_xenbus.c

152

aprint_error("%s: unable to register with sysmon\n", __func__);

sys/arch/xen/xen/shutdown_xenbus.c

156

aprint_error("%s: unable to watch control/shutdown\n", __func__);

sys/arch/xen/xen/xbdback_xenbus.c

1463

aprint_error("xbdback %s: DIOCCACHESYNC returned %d\n",

sys/arch/xen/xen/xbdback_xenbus.c

328

aprint_error("xbdback: can't read %s/frontend-id: %d\n",

sys/arch/xen/xen/xbdback_xenbus.c

343

aprint_error("xbdback: can't parse %s\n",

sys/arch/xen/xen/xbdback_xenbus.c

349

aprint_error("xbdback: can't parse %s\n",

sys/arch/xen/xen/xbdback_xenbus.c

575

aprint_error("xbd domain %d: unknown proto %s\n",

sys/arch/xen/xen/xbdback_xenbus.c

594

aprint_error("xbdback %s: can't map grant ref\n",

sys/arch/xen/xen/xbdback_xenbus.c

628

aprint_error("blkback %s: "

sys/arch/xen/xen/xbdback_xenbus.c

716

aprint_error("xbdback %s: invalid frontend state %d\n",

sys/arch/xen/xen/xengnt.c

261

aprint_error("%s: get_status_frames returned %d\n",

sys/arch/xen/xen/xengnt.c

353

aprint_error("%s: setup table returned %d\n",

sys/arch/xen/xen/xennetback_xenbus.c

184

aprint_error("xvif: can't read %s/frontend-id: %d\n",

sys/arch/xen/xen/xennetback_xenbus.c

190

aprint_error("xvif: can't read %s/handle: %d\n",

sys/arch/xen/xen/xennetback_xenbus.c

568

aprint_error("%s: invalid frontend state %d\n",

sys/arch/xen/xen/xpci_xenbus.c

136

aprint_error("Xen PCI frontend already attached\n");

sys/arch/xen/xen/xpci_xenbus.c

586

aprint_error(

sys/arch/xen/xen/xpci_xenbus.c

600

aprint_error(

sys/arch/xen/xen/xpci_xenbus.c

616

aprint_error(

sys/arch/zaurus/dev/ioexp.c

208

aprint_error("ioexp: %s: not attached or not inited\n",

sys/arch/zaurus/dev/ioexp.c

256

aprint_error("ioexp: %s: not attached or not inited\n",

sys/arch/zaurus/dev/ioexp.c

290

aprint_error("ioexp: %s: not attached or not inited\n",

sys/arch/zaurus/dev/ioexp.c

322

aprint_error("ioexp: %s: not attached or not inited\n",

sys/arch/zaurus/dev/ioexpvar.h

50

aprint_error("%s: this kernel is not support SL-C1000\n",

sys/arch/zaurus/dev/ioexpvar.h

59

aprint_error("%s: this kernel is not support SL-C1000\n",

sys/arch/zaurus/dev/ioexpvar.h

68

aprint_error("%s: this kernel is not support SL-C1000\n",

sys/arch/zaurus/dev/ioexpvar.h

77

aprint_error("%s: this kernel is not support SL-C1000\n",

sys/arch/zaurus/dev/zssp.c

181

aprint_error("%s: not configured.\n", __func__);

sys/arch/zaurus/dev/zssp.c

219

aprint_error("%s: not configured.\n", __func__);

sys/arch/zaurus/dev/zssp.c

264

aprint_error("%s: not configured.\n", __func__);

sys/arch/zaurus/dev/zssp.c

309

aprint_error("zssp: zssp_ic_send: invalid IC %d\n", ic);

sys/arch/zaurus/dev/zssp.c

324

aprint_error("%s: not configured.\n", __func__);

sys/arch/zaurus/dev/zssp.c

379

aprint_error("%s: not configured\n", __func__);

sys/crypto/aes/aes_impl.c

122

aprint_error("aes: self-test failed: %s\n",

sys/crypto/aes/aes_impl.c

129

aprint_error("aes: self-test failed: %s\n",

sys/crypto/chacha/chacha_impl.c

81

aprint_error("chacha: self-test failed: %s\n",

sys/dev/acpi/acpi.c

279

aprint_error("%s: failed to initialize subsystem\n", __func__);

sys/dev/acpi/acpi.c

290

aprint_error("%s: failed to initialize tables\n", __func__);

sys/dev/acpi/acpi.c

297

aprint_error("%s: failed to load tables\n", __func__);

sys/dev/acpi/acpi.c

304

aprint_error("%s: failed to map RSDT\n", __func__);

sys/dev/acpi/acpi.c

338

aprint_error("%s: failed to enable subsystem\n", __func__);

sys/dev/acpi/acpi.c

607

aprint_error("%s: failed to initialize ACPI: %s\n",

sys/dev/acpi/acpi_cpu.c

367

aprint_error("%s: failed to init sysctl (err %d)\n", __func__, err);

sys/dev/acpi/acpi_debug.c

133

aprint_error("acpi0: failed to initialize ACPI debug\n");

sys/dev/acpi/acpi_pcc.c

110

aprint_error(": Already attached!\n");

sys/dev/acpi/acpi_pcc.c

116

aprint_error(": No subspaces found!\n");

sys/dev/acpi/acpi_pci_link.c

450

aprint_error("%s: Unable to parse _CRS or _PRS: %s\n",

sys/dev/acpi/acpi_pci_link.c

484

aprint_error("%s: Unable to parse _CRS: %s\n",

sys/dev/acpi/acpi_pci_link.c

503

aprint_error("%s: Unable to parse _PRS: %s\n",

sys/dev/acpi/acpi_wdrt.c

171

aprint_error(": couldn't get WDRT (%s)\n",

sys/dev/acpi/acpi_wdrt.c

178

aprint_error(": maximum counter value out of range (%d)\n",

sys/dev/acpi/acpi_wdrt.c

189

aprint_error(": units not supported (0x%x)\n", wdrt->Units);

sys/dev/acpi/ahcisata_acpi.c

102

aprint_error(": couldn't map registers\n");

sys/dev/acpi/ahcisata_acpi.c

88

aprint_error(": couldn't find mem resource\n");

sys/dev/acpi/ahcisata_acpi.c

94

aprint_error(": couldn't find irq resource\n");

sys/dev/acpi/apei_erst.c

336

aprint_error("ERST[%"PRIu32"]:"

sys/dev/acpi/apei_interp.c

223

aprint_error("%s[%"PRIu32"]: unknown action: 0x%"PRIx8"\n",

sys/dev/acpi/apei_interp.c

236

aprint_error("%s[%"PRIu32"]: unknown instruction: 0x%02"PRIx8

sys/dev/acpi/apei_interp.c

256

aprint_error("%s[%"PRIu32"]:"

sys/dev/acpi/com_acpi.c

178

aprint_error(": com probe failed\n");

sys/dev/acpi/genet_acpi.c

130

aprint_error(": unsupported phy-mode '%s'\n", phy_mode);

sys/dev/acpi/hpet_acpi.c

100

aprint_error(": failed to get address\n");

sys/dev/acpi/hpet_acpi.c

108

aprint_error(": failed to map mem space\n");

sys/dev/acpi/hpet_acpi.c

183

aprint_error(": failed to get address\n");

sys/dev/acpi/hpet_acpi.c

190

aprint_error(": failed to map mem space\n");

sys/dev/acpi/ipmi_acpi.c

103

aprint_error("no _SRV\n");

sys/dev/acpi/ipmi_acpi.c

97

aprint_error("no _IFT\n");

sys/dev/acpi/qcomipcc.c

104

aprint_error(": already attached!\n");

sys/dev/acpi/qcomscm.c

178

aprint_error(": can't allocate memory for extended args\n");

sys/dev/acpi/qcomsmem.c

193

aprint_error(": can't map mutex registers\n");

sys/dev/acpi/qcomsmem.c

202

aprint_error(": unsupported ptable 0x%x/0x%x\n",

sys/dev/acpi/qcomsmem.c

210

aprint_error(": unsupported header 0x%x\n", hdr_version);

sys/dev/acpi/qcomsmem.c

233

aprint_error(": unsupported partition 0x%x\n",

sys/dev/acpi/qcomsmem.c

239

aprint_error(": bad hosts 0x%x/0x%x+0x%x/0x%x\n",

sys/dev/acpi/qcomsmem.c

245

aprint_error(": bad size 0x%x/0x%x\n",

sys/dev/acpi/qcomsmem.c

250

aprint_error(": bad size 0x%x > 0x%x\n",

sys/dev/acpi/qcomsmem.c

259

aprint_error(": could not find global partition\n");

sys/dev/acpi/qcomsmptp.c

144

aprint_error(": can't establish interrupt\n");

sys/dev/acpi/valz_acpi.c

302

aprint_error("Cannot enable VALZ.\n");

sys/dev/acpi/valz_acpi.c

494

aprint_error("SCI: ACPI set error\n");

sys/dev/acpi/valz_acpi.c

501

aprint_error("SCI already open\n");

sys/dev/acpi/valz_acpi.c

504

aprint_error("SCI is not supported\n");

sys/dev/acpi/valz_acpi.c

507

aprint_error("SCI is not present\n");

sys/dev/acpi/valz_acpi.c

510

aprint_error("SCI: undefined behavior\n");

sys/dev/acpi/valz_acpi.c

529

aprint_error("SCI: ACPI set error\n");

sys/dev/acpi/valz_acpi.c

536

aprint_error("SCI is not opened\n");

sys/dev/acpi/valz_acpi.c

539

aprint_error("SCI is not supported\n");

sys/dev/acpi/valz_acpi.c

542

aprint_error("SCI is not present\n");

sys/dev/acpi/valz_acpi.c

545

aprint_error("SCI: undefined behavior\n");

sys/dev/acpi/wmi/wmi_dell.c

145

aprint_error(": failed to install WMI notify handler\n");

sys/dev/acpi/wmi/wmi_dell.c

152

aprint_error(": failed to query WMI descriptor: %s\n",

sys/dev/acpi/wmi/wmi_dell.c

158

aprint_error(": wrong type %d for WMI descriptor\n", obj->Type);

sys/dev/acpi/wmi/wmi_dell.c

162

aprint_error(": wrong len %d for WMI descriptor",

sys/dev/acpi/wmi/wmi_dell.c

165

aprint_error("\n");

sys/dev/acpi/wmi/wmi_dell.c

173

aprint_error(": wrong WMI descriptor signature %#x %#x",

sys/dev/acpi/wmi/wmi_eeepc.c

130

aprint_error(": failed to install WMI notify handler\n");

sys/dev/acpi/wmi/wmi_msi.c

88

aprint_error(": failed to install WMI notify handler\n");

sys/dev/ata/ata_raid.c

348

aprint_error("%s: unable to register cfattach for \n"

sys/dev/ata/ata_raid.c

357

aprint_error("%s: failed to detach %s cfattach, "

sys/dev/ata/ata_raid.c

366

aprint_error("%s: failed to detach %s cfdriver, "

sys/dev/ata/sata_subr.c

138

aprint_error("%s port %d: device connected, but "

sys/dev/ata/sata_subr.c

154

aprint_error("%s port %d: unknown SStatus: 0x%08x\n",

sys/dev/ata/satapmp_subr.c

219

aprint_error("%s PMP port %d: device connected, but "

sys/dev/ata/satapmp_subr.c

224

aprint_error("%s PMP port %d: PHY offline\n",

sys/dev/ata/satapmp_subr.c

232

aprint_error("%s PMP port %d: unknown SStatus: 0x%08x\n",

sys/dev/ata/satapmp_subr.c

256

aprint_error("%s PMP port %d: can't write SError\n",

sys/dev/audio/audio.c

1547

aprint_error("audio_attach_mi: NULL\n");

sys/dev/audio/audio.c

945

aprint_error(": missing mandatory method\n");

sys/dev/audio/audio.c

964

aprint_error(": missing mandatory method\n");

sys/dev/audio/audio.c

971

aprint_error(": missing playback method\n");

sys/dev/audio/audio.c

978

aprint_error(": missing capture method\n");

sys/dev/bluetooth/bcsp.c

227

aprint_error("%s: unable to register line discipline, "

sys/dev/bluetooth/bcsp.c

234

aprint_error("%s: unable to register cfattach, error = %d\n",

sys/dev/bluetooth/bth5.c

232

aprint_error("%s: unable to register line discipline, "

sys/dev/bluetooth/bth5.c

239

aprint_error("%s: unable to register cfattach, error = %d\n",

sys/dev/bluetooth/bthidev.c

239

aprint_error(" unknown %s\n", BTDEVmode);

sys/dev/bluetooth/bthidev.c

252

aprint_error(" invalid %s\n", BTHIDEVcontrolpsm);

sys/dev/bluetooth/bthidev.c

261

aprint_error(" invalid %s\n", BTHIDEVinterruptpsm);

sys/dev/bluetooth/bthidev.c

271

aprint_error(" no %s\n", BTHIDEVdescriptor);

sys/dev/bluetooth/bthidev.c

293

aprint_error(" no reports found\n");

sys/dev/bluetooth/btkbd.c

221

aprint_error("%s\n", parserr);

sys/dev/bluetooth/btmagic.c

328

aprint_error(" unknown %s\n", BTDEVmode);

sys/dev/bluetooth/btms.c

222

aprint_error("X report 0x%04x not supported\n", flags);

sys/dev/bluetooth/btms.c

236

aprint_error("Y report 0x%04x not supported\n", flags);

sys/dev/bluetooth/btms.c

252

aprint_error("Wheel report 0x%04x ignored\n", flags);

sys/dev/bluetooth/btsco.c

306

aprint_error(" invalid %s", BTSCOchannel);

sys/dev/bluetooth/btsco.c

993

aprint_error("%s: ring buffer unreleased!\n", sc->sc_name);

sys/dev/bluetooth/btuart.c

146

aprint_error("%s: unable to register line discipline, "

sys/dev/bluetooth/btuart.c

154

aprint_error("%s: unable to register cfattach, error = %d\n",

sys/dev/cardbus/adv_cardbus.c

144

aprint_error(": unknown model!\n");

sys/dev/cardbus/ahc_cardbus.c

141

aprint_error("%s: unable to map device registers\n",

sys/dev/cardbus/ahc_cardbus.c

197

aprint_error("%s: unable to establish interrupt\n",

sys/dev/cardbus/com_cardbus.c

169

aprint_error(": couldn't find any base address tuple\n");

sys/dev/cardbus/com_cardbus.c

180

aprint_error(": there are more than one possible base\n");

sys/dev/cardbus/com_cardbus.c

227

aprint_error("failed to map memory");

sys/dev/cardbus/ehci_cardbus.c

147

aprint_error("%s: can't map mem space\n", devname);

sys/dev/cardbus/ehci_cardbus.c

169

aprint_error("%s: couldn't establish interrupt\n", devname);

sys/dev/cardbus/ehci_cardbus.c

192

aprint_error("%s: init failed, error=%d\n", devname, err);

sys/dev/cardbus/if_malo_cardbus.c

117

aprint_error(": can't map mem1 space\n");

sys/dev/cardbus/if_malo_cardbus.c

126

aprint_error(": can't map mem2 space\n");

sys/dev/cardbus/if_ral_cardbus.c

158

aprint_error(": could not map memory space\n");

sys/dev/cardbus/if_re_cardbus.c

153

aprint_error("\n");

sys/dev/cardbus/if_rtk_cardbus.c

183

aprint_error("\n");

sys/dev/cardbus/njata_cardbus.c

184

aprint_error("%s: unable to map device registers\n",

sys/dev/cardbus/njata_cardbus.c

214

aprint_error("%s: unable to establish interrupt\n",

sys/dev/cardbus/ohci_cardbus.c

124

aprint_error("%s: can't map mem space\n", devname);

sys/dev/cardbus/ohci_cardbus.c

145

aprint_error("%s: couldn't establish interrupt\n", devname);

sys/dev/cardbus/ohci_cardbus.c

151

aprint_error("%s: init failed, error=%d\n", devname, err);

sys/dev/cardbus/siisata_cardbus.c

179

aprint_error(

sys/dev/cardbus/siisata_cardbus.c

203

aprint_error(

sys/dev/cardbus/siisata_cardbus.c

225

aprint_error("%s: couldn't establish interrupt\n",

sys/dev/cardbus/uhci_cardbus.c

113

aprint_error("%s: can't map i/o space\n", devname);

sys/dev/cardbus/uhci_cardbus.c

134

aprint_error("%s: couldn't establish interrupt\n", devname);

sys/dev/cardbus/uhci_cardbus.c

158

aprint_error("%s: init failed, error=%d\n", devname, err);

sys/dev/cgd.c

1751

aprint_error("%s: unable to attach %s devsw, "

sys/dev/cgd.c

1762

aprint_error("%s: unable to register cfdriver for"

sys/dev/cgd.c

1771

aprint_error("%s: unable to register cfattach for"

sys/dev/cgd.c

1785

aprint_error("%s: failed to detach %s cfattach, "

sys/dev/cgd.c

1792

aprint_error("%s: failed to detach %s cfdriver, "

sys/dev/cgd.c

560

aprint_error("%s: unable to register cfattach\n",

sys/dev/clk/clk.c

203

aprint_error("%s: failed to create sysctl node for %s (%s): %d\n",

sys/dev/dkwedge/dk.c

1083

aprint_error("dk-method-%s: method \"%s\" "

sys/dev/dkwedge/dk.c

1147

aprint_error("%s: unable to compute pdev, error = %d\n",

sys/dev/dkwedge/dk.c

1154

aprint_error("%s: unable to find vnode for pdev, error = %d\n",

sys/dev/dkwedge/dk.c

1161

aprint_error("%s: unable to lock vnode for pdev, error = %d\n",

sys/dev/dkwedge/dk.c

1170

aprint_error("%s: unable to open device, error = %d\n",

sys/dev/dkwedge/dk.c

1197

aprint_error("%s: unable to close device, error = %d\n",

sys/dev/dkwedge/dk.c

621

aprint_error("%s%u: unable to attach pseudo-device\n",

sys/dev/dkwedge/dkwedge_apple.c

176

aprint_error("%s: WARNING: clamping number of blocks to "

sys/dev/dkwedge/dkwedge_apple.c

229

aprint_error("%s: wedge named '%s' already "

sys/dev/dkwedge/dkwedge_apple.c

233

aprint_error("%s: error %d adding partition "

sys/dev/dkwedge/dkwedge_bsdlabel.c

264

aprint_error("%s: wedge named '%s' already "

sys/dev/dkwedge/dkwedge_bsdlabel.c

268

aprint_error("%s: error %d adding partition "

sys/dev/dkwedge/dkwedge_bsdlabel.c

285

aprint_error("%s: unable to read BSD disklabel @ %" PRId64

sys/dev/dkwedge/dkwedge_bsdlabel.c

317

aprint_error("%s: BSD disklabel @ "

sys/dev/dkwedge/dkwedge_bsdlabel.c

330

aprint_error("%s: BSD disklabel @ %" PRId64

sys/dev/dkwedge/dkwedge_bsdlabel.c

362

aprint_error("%s: unable to read MBR @ %u, "

sys/dev/dkwedge/dkwedge_gpt.c

181

aprint_error("%s: bogus GPT entry size: %u\n",

sys/dev/dkwedge/dkwedge_gpt.c

190

aprint_error("%s: WARNING: clamping number of GPT entries to "

sys/dev/dkwedge/dkwedge_gpt.c

199

aprint_error("%s: GPT block numbers out of range\n",

sys/dev/dkwedge/dkwedge_gpt.c

213

aprint_error("%s: unable to read GPT partition array, "

sys/dev/dkwedge/dkwedge_gpt.c

220

aprint_error("%s: bad GPT partition array CRC\n",

sys/dev/dkwedge/dkwedge_gpt.c

287

aprint_error("%s: wedge named '%s' already "

sys/dev/dkwedge/dkwedge_gpt.c

292

aprint_error("%s: wedge named '%s' already exists, "

sys/dev/dkwedge/dkwedge_gpt.c

296

aprint_error("%s: error %d adding entry %u (%s), "

sys/dev/dkwedge/dkwedge_mbr.c

149

aprint_error("%s: wedge named '%s' already "

sys/dev/dkwedge/dkwedge_mbr.c

153

aprint_error("%s: error %d adding partition "

sys/dev/dkwedge/dkwedge_mbr.c

94

aprint_error("%s: unable to read MBR @ %u/%u, "

sys/dev/dkwedge/dkwedge_rdb.c

128

aprint_error("%s: unable to read RDB @ %u, "

sys/dev/dkwedge/dkwedge_rdb.c

138

aprint_error("%s: RDB bad checksum @ %u\n",

sys/dev/dkwedge/dkwedge_rdb.c

173

aprint_error("%s: unable to read RDB partition block @ "

sys/dev/dkwedge/dkwedge_rdb.c

181

aprint_error(

sys/dev/dkwedge/dkwedge_rdb.c

188

aprint_error(

sys/dev/dkwedge/dkwedge_rdb.c

201

aprint_error(

sys/dev/dkwedge/dkwedge_rdb.c

223

aprint_error("%s: more than one root RDB "

sys/dev/dkwedge/dkwedge_rdb.c

231

aprint_error("%s: more than one swap RDB "

sys/dev/dkwedge/dkwedge_rdb.c

260

aprint_error(

sys/dev/dkwedge/dkwedge_rdb.c

264

aprint_error("%s: error %d adding partition %s\n",

sys/dev/dkwedge/dkwedge_tos.c

162

aprint_error("partition named \"%s\" already exists",

sys/dev/dkwedge/dkwedge_tos.c

92

aprint_error("unable to read TOS Root Sector: error = %d",

sys/dev/dm/device-mapper.c

190

aprint_error("%s: unable to register cfattach\n",

sys/dev/dm/device-mapper.c

321

aprint_error("%s: unable to register cfattach\n",

sys/dev/dm/dm_ioctl.c

224

aprint_error("Unable to attach pseudo device dm/%s\n", name);

sys/dev/dtv/dtv_device.c

113

aprint_error(": no memory\n");

sys/dev/eisa/ahb.c

259

aprint_error(" at %s", intrstr);

sys/dev/eisa/ahb.c

260

aprint_error("\n");

sys/dev/eisa/ahc_eisa.c

177

aprint_error(" at %s", intrstr);

sys/dev/eisa/ahc_eisa.c

178

aprint_error("\n");

sys/dev/eisa/bha_eisa.c

191

aprint_error(" at %s", intrstr);

sys/dev/eisa/bha_eisa.c

192

aprint_error("\n");

sys/dev/eisa/cac_eisa.c

173

aprint_error(": can't map i/o space\n");

sys/dev/eisa/cac_eisa.c

203

aprint_error(": controller on invalid IRQ\n");

sys/dev/eisa/cac_eisa.c

208

aprint_error(": can't map interrupt (%d)\n", irq);

sys/dev/eisa/cac_eisa.c

215

aprint_error(": can't establish interrupt");

sys/dev/eisa/depca_eisa.c

174

aprint_error(" at %s", intrstr);

sys/dev/eisa/depca_eisa.c

175

aprint_error("\n");

sys/dev/eisa/dpt_eisa.c

136

aprint_error("can't map i/o space\n");

sys/dev/eisa/dpt_eisa.c

146

aprint_error("HBA on invalid IRQ\n");

sys/dev/eisa/dpt_eisa.c

151

aprint_error("can't map interrupt (%d)\n", irq);

sys/dev/eisa/dpt_eisa.c

159

aprint_error("can't establish interrupt");

sys/dev/eisa/dpt_eisa.c

161

aprint_error(" at %s", intrstr);

sys/dev/eisa/dpt_eisa.c

162

aprint_error("\n");

sys/dev/eisa/if_ep_eisa.c

299

aprint_error(" at %s", intrstr);

sys/dev/eisa/if_ep_eisa.c

300

aprint_error("\n");

sys/dev/eisa/if_tlp_eisa.c

161

aprint_error(": unable to map I/O space\n");

sys/dev/eisa/if_tlp_eisa.c

262

aprint_error(" at %s", intrstr);

sys/dev/eisa/if_tlp_eisa.c

263

aprint_error("\n");

sys/dev/eisa/mlx_eisa.c

186

aprint_error(" at %s", intrstr);

sys/dev/eisa/mlx_eisa.c

187

aprint_error("\n");

sys/dev/eisa/uha_eisa.c

156

aprint_error(" at %s", intrstr);

sys/dev/eisa/uha_eisa.c

157

aprint_error("\n");

sys/dev/fdt/ahcisata_fdt.c

72

aprint_error(": couldn't get registers\n");

sys/dev/fdt/ahcisata_fdt.c

81

aprint_error(": couldn't map registers\n");

sys/dev/fdt/ahcisata_fdt.c

88

aprint_error(": failed to decode interrupt\n");

sys/dev/fdt/ahcisata_fdt.c

94

aprint_error(": couldn't enable clock #%d\n", i);

sys/dev/fdt/ahcisata_fdt.c

99

aprint_error(": couldn't de-assert reset #%d\n", i);

sys/dev/fdt/amdccp_fdt.c

78

aprint_error(": couldn't get registers\n");

sys/dev/fdt/amdccp_fdt.c

84

aprint_error(": couldn't map registers\n");

sys/dev/fdt/arasan_sdhc_fdt.c

242

aprint_error(": couldn't get registers\n");

sys/dev/fdt/arasan_sdhc_fdt.c

247

aprint_error(": couldn't decode interrupt\n");

sys/dev/fdt/arasan_sdhc_fdt.c

254

aprint_error(": couldn't get clocks\n");

sys/dev/fdt/arasan_sdhc_fdt.c

258

aprint_error(": couldn't enable clocks\n");

sys/dev/fdt/arasan_sdhc_fdt.c

270

aprint_error(": couldn't map registers\n");

sys/dev/fdt/arasan_sdhc_fdt.c

282

aprint_error(": couldn't create DMA tag: %d\n", error);

sys/dev/fdt/cdns3_fdt.c

114

aprint_error(": host is not default mode\n");

sys/dev/fdt/cdns3_fdt.c

119

aprint_error(": cannot switch 'otg' mode to host\n");

sys/dev/fdt/cdns3_fdt.c

123

aprint_error(": '%s' not supported\n", dr_mode);

sys/dev/fdt/cdns3_fdt.c

135

aprint_error(": couldn't map otg registers\n");

sys/dev/fdt/cdns3_fdt.c

143

aprint_error(": couldn't map xhci registers\n");

sys/dev/fdt/cdns3_fdt.c

152

aprint_error(": unsupported IP (%#x)\n", did);

sys/dev/fdt/cdns3_fdt.c

165

aprint_error(": not ready (%#x)\n", sts);

sys/dev/fdt/cdnsiic_fdt.c

71

aprint_error(": couldn't get registers\n");

sys/dev/fdt/cdnsiic_fdt.c

77

aprint_error(": couldn't enable pclk\n");

sys/dev/fdt/cdnsiic_fdt.c

87

aprint_error(": couldn't map registers\n");

sys/dev/fdt/dw_apb_uart.c

107

aprint_error(": couldn't get clock\n");

sys/dev/fdt/dw_apb_uart.c

111

aprint_error(": couldn't enable clock\n");

sys/dev/fdt/dw_apb_uart.c

117

aprint_error(": couldn't enable peripheral clock\n");

sys/dev/fdt/dw_apb_uart.c

123

aprint_error(": couldn't de-assert reset\n");

sys/dev/fdt/dw_apb_uart.c

132

aprint_error(": couldn't map %#" PRIx64 ": %d", (uint64_t)addr, error);

sys/dev/fdt/dw_apb_uart.c

90

aprint_error(": couldn't get registers\n");

sys/dev/fdt/dwc2_fdt.c

128

aprint_error(": mode '%s' not supported\n", dr_mode);

sys/dev/fdt/dwc2_fdt.c

133

aprint_error(": couldn't get registers\n");

sys/dev/fdt/dwc2_fdt.c

139

aprint_error(": couldn't enable otg clock\n");

sys/dev/fdt/dwc2_fdt.c

146

aprint_error(": couldn't enable phy\n");

sys/dev/fdt/dwc2_fdt.c

157

aprint_error(": couldn't map device\n");

sys/dev/fdt/dwc2_fdt.c

167

aprint_error(": failed to decode interrupt\n");

sys/dev/fdt/dwc3_fdt.c

255

aprint_error(": couldn't find dwc3 child node\n");

sys/dev/fdt/dwc3_fdt.c

274

aprint_error(": host is not default mode\n");

sys/dev/fdt/dwc3_fdt.c

279

aprint_error(": cannot switch 'otg' mode to host\n");

sys/dev/fdt/dwc3_fdt.c

283

aprint_error(": '%s' not supported\n", dr_mode);

sys/dev/fdt/dwc3_fdt.c

291

aprint_error(": couldn't enable clock #%d\n", n);

sys/dev/fdt/dwc3_fdt.c

297

aprint_error(": couldn't de-assert reset #%d\n", n);

sys/dev/fdt/dwc3_fdt.c

303

aprint_error(": couldn't get registers\n");

sys/dev/fdt/dwc3_fdt.c

313

aprint_error(": couldn't map registers\n");

sys/dev/fdt/dwcmmc_fdt.c

117

aprint_error(": couldn't get registers\n");

sys/dev/fdt/dwcmmc_fdt.c

128

aprint_error(": couldn't get clock biu\n");

sys/dev/fdt/dwcmmc_fdt.c

133

aprint_error(": couldn't get clock ciu\n");

sys/dev/fdt/dwcmmc_fdt.c

139

aprint_error(": couldn't enable clock biu: %d\n", error);

sys/dev/fdt/dwcmmc_fdt.c

144

aprint_error(": couldn't enable clock ciu: %d\n", error);

sys/dev/fdt/dwcmmc_fdt.c

156

aprint_error(": couldn't map %#" PRIx64 ": %d\n",

sys/dev/fdt/dwcwdt_fdt.c

70

aprint_error(": couldn't get registers\n");

sys/dev/fdt/dwcwdt_fdt.c

76

aprint_error(": couldn't enable clock\n");

sys/dev/fdt/dwcwdt_fdt.c

81

aprint_error(": couldn't assert reset\n");

sys/dev/fdt/dwcwdt_fdt.c

85

aprint_error(": couldn't de-assert reset\n");

sys/dev/fdt/dwcwdt_fdt.c

92

aprint_error(": couldn't map registers\n");

sys/dev/fdt/dwiic_fdt.c

102

aprint_error(": missing clock\n");

sys/dev/fdt/dwiic_fdt.c

110

aprint_error(": couldn't de-assert the reset\n");

sys/dev/fdt/dwiic_fdt.c

82

aprint_error(": couldn't get registers\n");

sys/dev/fdt/dwiic_fdt.c

88

aprint_error(": couldn't map registers\n");

sys/dev/fdt/dwiic_fdt.c

97

aprint_error(": couldn't enable clock #%d\n", c);

sys/dev/fdt/ehci_fdt.c

105

aprint_error(": couldn't enable phy\n");

sys/dev/fdt/ehci_fdt.c

120

aprint_error(": couldn't map registers\n");

sys/dev/fdt/ehci_fdt.c

85

aprint_error(": couldn't get registers\n");

sys/dev/fdt/ehci_fdt.c

92

aprint_error(": couldn't enable clock #%d\n", n);

sys/dev/fdt/ehci_fdt.c

98

aprint_error(": couldn't de-assert reset #%d\n", n);

sys/dev/fdt/fdt_clock.c

250

aprint_error("clk: failed to set %s parent to %s, error %d\n",

sys/dev/fdt/fdt_clock.c

263

aprint_error("clk: failed to set %s rate to %u Hz, error %d\n",

sys/dev/fdt/fdt_port.c

367

aprint_error("%s: ", ep_name(ep, buf, sizeof(buf)));

sys/dev/fdt/fdt_port.c

368

aprint_error("remote endpoint %s ",

sys/dev/fdt/fdt_port.c

370

aprint_error("already connected to %s\n",

sys/dev/fdt/fixedclock.c

109

aprint_error(": couldn't determine frequency\n");

sys/dev/fdt/fixedfactorclock.c

110

aprint_error(": invalid properties\n");

sys/dev/fdt/genet_fdt.c

111

aprint_error(": unsupported phy-mode '%s'\n", phy_mode);

sys/dev/fdt/genet_fdt.c

116

aprint_error(": failed to decode interrupt\n");

sys/dev/fdt/genet_fdt.c

83

aprint_error(": couldn't get registers\n");

sys/dev/fdt/genet_fdt.c

90

aprint_error(": couldn't map registers\n");

sys/dev/fdt/genet_fdt.c

98

aprint_error(": missing 'phy-mode' property\n");

sys/dev/fdt/gfrtc_fdt.c

71

aprint_error(": couldn't get registers\n");

sys/dev/fdt/gfrtc_fdt.c

78

aprint_error(": couldn't map registers\n");

sys/dev/fdt/gpiokeys.c

238

aprint_error(" %s:ERROR", key->key_label);

sys/dev/fdt/mmc_pwrseq_emmc.c

89

aprint_error(": couldn't get reset GPIO\n");

sys/dev/fdt/mmc_pwrseq_simple.c

129

aprint_error(": couldn't acquire ext_clock\n");

sys/dev/fdt/mmc_pwrseq_simple.c

146

aprint_error(": couldn't get reset GPIOs\n");

sys/dev/fdt/ns8250_uart.c

122

aprint_error(": couldn't get registers\n");

sys/dev/fdt/ns8250_uart.c

138

aprint_error(": couldn't get frequency\n");

sys/dev/fdt/ns8250_uart.c

148

aprint_error(": couldn't map %#" PRIx64 ": %d",

sys/dev/fdt/ohci_fdt.c

105

aprint_error(": couldn't enable phy\n");

sys/dev/fdt/ohci_fdt.c

116

aprint_error(": couldn't map registers\n");

sys/dev/fdt/ohci_fdt.c

85

aprint_error(": couldn't get registers\n");

sys/dev/fdt/ohci_fdt.c

92

aprint_error(": couldn't enable clock #%d\n", n);

sys/dev/fdt/ohci_fdt.c

98

aprint_error(": couldn't de-assert reset #%d\n", n);

sys/dev/fdt/panel_fdt.c

105

aprint_error(": missing width-mm or height-mm properties\n");

sys/dev/fdt/panel_fdt.c

116

aprint_error(": failed to parse panel-timing\n");

sys/dev/fdt/panel_fdt.c

121

aprint_error(": missing panel-timing\n");

sys/dev/fdt/panel_fdt.c

129

aprint_error(": missing data-mapping\n");

sys/dev/fdt/panel_fdt.c

139

aprint_error(": unknown data-mapping \"%s\"\n", val);

sys/dev/fdt/pcfiic_fdt.c

106

aprint_error(": couldn't get frequency\n");

sys/dev/fdt/pcfiic_fdt.c

138

aprint_error(": frequency %u out of range\n", frequency);

sys/dev/fdt/pcfiic_fdt.c

145

aprint_error(": invalid own-address property\n");

sys/dev/fdt/pcfiic_fdt.c

84

aprint_error(": couldn't get registers\n");

sys/dev/fdt/pcfiic_fdt.c

93

aprint_error(": couldn't map registers (error=%d)\n",

sys/dev/fdt/pinctrl_single.c

159

aprint_error(": couldn't get registers\n");

sys/dev/fdt/pinctrl_single.c

169

aprint_error(": couldn't map registers\n");

sys/dev/fdt/pinctrl_single.c

175

aprint_error(": missing 'pinctrl-single,register-width' property\n");

sys/dev/fdt/pinctrl_single.c

179

aprint_error(": missing 'pinctrl-single,function-mask' property\n");

sys/dev/fdt/pinctrl_single.c

189

aprint_error(": register width %d not supported\n", sc->sc_regwidth);

sys/dev/fdt/pl061gpio_fdt.c

105

aprint_error(": couldn't map %#"PRIx64": %d", (uint64_t)addr, error);

sys/dev/fdt/pl061gpio_fdt.c

97

aprint_error(": couldn't get registers\n");

sys/dev/fdt/pwm_backlight.c

103

aprint_error(": couldn't acquire enable gpio\n");

sys/dev/fdt/pwm_backlight.c

96

aprint_error(": couldn't acquire pwm\n");

sys/dev/fdt/pwm_fan.c

87

aprint_error(": couldn't acquire pwm\n");

sys/dev/fdt/pwm_fan.c

93

aprint_error(": couldn't get 'cooling-levels' property\n");

sys/dev/fdt/simplefb.c

141

aprint_error(": couldn't get registers\n");

sys/dev/fdt/simplefb.c

155

aprint_error(": missing property in DT\n");

sys/dev/fdt/simplefb.c

173

aprint_error(": unsupported format '%s'\n", format);

sys/dev/fdt/simplefb.c

178

aprint_error(": incorrect size\n");

sys/dev/fdt/simplefb.c

191

aprint_error(": failed to map fb\n");

sys/dev/fdt/syscon.c

119

aprint_error(": couldn't get registers\n");

sys/dev/fdt/syscon.c

126

aprint_error(": couldn't map registers\n");

sys/dev/fdt/usbnode.c

112

aprint_error(": couldn't acquire reset gpio\n");

sys/dev/fdt/wdc_fdt.c

106

aprint_error(": couldn't map command registers (error=%d)\n",

sys/dev/fdt/wdc_fdt.c

114

aprint_error(": couldn't map control registers (error=%d)\n",

sys/dev/fdt/wdc_fdt.c

142

aprint_error(": couldn't subregion command "

sys/dev/fdt/wdc_fdt.c

94

aprint_error(": couldn't get command registers\n");

sys/dev/fdt/wdc_fdt.c

99

aprint_error(": couldn't get control registers\n");

sys/dev/flash/flash.c

237

aprint_error("flash_attach_mi: NULL\n");

sys/dev/flash/flash_io.c

414

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/fss.c

143

aprint_error("%s: unable to register\n", fss_cd.cd_name);

sys/dev/gpio/gpio.c

1212

aprint_error("%s: unable to register devsw\n",

sys/dev/gpio/gpio.c

1219

aprint_error("%s: unable to init component\n",

sys/dev/gpio/gpiobutton.c

117

aprint_error(": couldn't map pins\n");

sys/dev/gpio/gpiobutton.c

124

aprint_error(": pin is not an input pin\n");

sys/dev/gpio/gpioiic.c

123

aprint_error(": can't map pins\n");

sys/dev/gpio/gpioiic.c

138

aprint_error(": SDA pin is unable to drive output\n");

sys/dev/gpio/gpioiic.c

142

aprint_error(": SDA pin is unable to read input\n");

sys/dev/gpio/gpioiic.c

163

aprint_error(": SCL pin is unable to drive output\n");

sys/dev/gpio/gpioiic.c

195

aprint_error("%s: could not establish power handler\n",

sys/dev/gpio/gpioiic.c

311

aprint_error("%s: unable to init component\n",

sys/dev/gpio/gpioirq.c

177

aprint_error(": can't map pins\n");

sys/dev/gpio/gpioirq.c

275

aprint_error("Could not allocate memory for read pool\n");

sys/dev/gpio/gpioirq.c

500

aprint_error("%s: unable to init component\n",

sys/dev/gpio/gpioirq.c

508

aprint_error("%s: unable to attach devsw\n",

sys/dev/gpio/gpiolock.c

103

aprint_error(": can't map pins\n");

sys/dev/gpio/gpiolock.c

111

aprint_error(": data pin is unable to read input\n");

sys/dev/gpio/gpiolock.c

122

aprint_error(": can't register keylock\n");

sys/dev/gpio/gpioow.c

111

aprint_error(": can't map pins\n");

sys/dev/gpio/gpioow.c

118

aprint_error(": data pin is unable to drive output\n");

sys/dev/gpio/gpioow.c

123

aprint_error(": data pin is unable to read input\n");

sys/dev/gpio/gpioow.c

155

aprint_error("%s: could not establish power handler\n",

sys/dev/gpio/gpioow.c

276

aprint_error("%s: unable to init component\n",

sys/dev/gpio/gpiopps.c

158

aprint_error(": invalid pin configuration\n");

sys/dev/gpio/gpiopps.c

169

aprint_error(": can't map pins\n");

sys/dev/gpio/gpiopps.c

515

aprint_error("%s: unable to attach devsw\n",

sys/dev/gpio/gpiopps.c

522

aprint_error("%s: unable to init component\n",

sys/dev/gpio/gpiopwm.c

103

aprint_error(": can't map pin\n");

sys/dev/gpio/gpiopwm.c

121

aprint_error(": can't create sysctl node\n");

sys/dev/gpio/gpiorfkill.c

93

aprint_error(": couldn't map pins\n");

sys/dev/gpio/gpiorfkill.c

99

aprint_error(": pin is not an output pin\n");

sys/dev/gpio/gpiosim.c

186

aprint_error(": can't create sysctl node\n");

sys/dev/gpio/gpiosim.c

212

aprint_error(": can't create workqueue for interrupts\n");

sys/dev/gpio/gpiosim.c

551

aprint_error("%s: unable to register cfattach\n",

sys/dev/gpio/gpiosim.c

560

aprint_error("%s: unable to register cfdata\n",

sys/dev/hid/hidms.c

103

aprint_error("\n%s: X report 0x%04x not supported\n",

sys/dev/hid/hidms.c

110

aprint_error("\n%s: mouse has no Y report\n",

sys/dev/hid/hidms.c

121

aprint_error("\n%s: Y report 0x%04x not supported\n",

sys/dev/hid/hidms.c

92

aprint_error("\n%s: mouse has no X report\n",

sys/dev/hyperv/if_hvn.c

5283

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, error);

sys/dev/i2c/axp20x.c

249

aprint_error(": can't read status: %d\n", error);

sys/dev/i2c/axp20x.c

255

aprint_error(": can't read power mode: %d\n", error);

sys/dev/i2c/axp20x.c

263

aprint_error(": can't set AXP_ADC_EN1\n");

sys/dev/i2c/axp20x.c

268

aprint_error(": can't read AXP_ADC_EN2\n");

sys/dev/i2c/axp20x.c

274

aprint_error(": can't set AXP_ADC_EN2\n");

sys/dev/i2c/cwfg.c

448

aprint_error(": device not responding, error = %d\n", error);

sys/dev/i2c/ds1307.c

305

aprint_error(": unable to determine model!\n");

sys/dev/i2c/emcfan.c

2224

aprint_error("%s: unable to attach devsw\n",

sys/dev/i2c/emcfan.c

2232

aprint_error("%s: unable to init component\n",

sys/dev/i2c/es8316ac.c

704

aprint_error(": couldn't enable mclk\n");

sys/dev/i2c/fan53555.c

241

aprint_error(": Unsupported Silergy chip (0x%x)\n", die_id);

sys/dev/i2c/fan53555.c

246

aprint_error(": Unsupported vendor (%d)\n", vendor);

sys/dev/i2c/fusbtc.c

302

aprint_error(": unable to establish interrupt\n");

sys/dev/i2c/i2c.c

1051

aprint_error("%s: unable to init component\n",

sys/dev/i2c/ihidev.c

173

aprint_error(": unsupported device tree type\n");

sys/dev/i2c/ihidev.c

182

aprint_error(": failed fetching initial HID descriptor\n");

sys/dev/i2c/m41st84.c

210

aprint_error(": unable to determine model!\n");

sys/dev/i2c/scmdi2c.c

280

aprint_error("%s: Trying no_cfdriver_vec method: %d\n",

sys/dev/i2c/scmdi2c.c

296

aprint_error("%s: Trying no_cfdriver_vec method: %d\n",

sys/dev/i2c/sdtemp.c

270

aprint_error(": attach error %d\n", error);

sys/dev/i2c/sdtemp.c

680

aprint_error("%s: %s: unknown device ID (%04hx)\n",

sys/dev/i2c/sht3x.c

1680

aprint_error("%s: unable to attach devsw\n",

sys/dev/i2c/sht3x.c

1688

aprint_error("%s: unable to init component\n",

sys/dev/ic/ac97.c

1171

aprint_error ("ac97: shouldn't get here\n");

sys/dev/ic/adv.c

333

aprint_error("adv_init: failed to find signature\n");

sys/dev/ic/ahcisata_core.c

1022

aprint_error("%s: BSY never cleared, TD 0x%x\n",

sys/dev/ic/ahcisata_core.c

1089

aprint_error("%s port %d: drive %d reset "

sys/dev/ic/ahcisata_core.c

170

aprint_error("%s: reset failed\n", AHCINAME(sc));

sys/dev/ic/ahcisata_core.c

198

aprint_error("%s: more ports than announced\n",

sys/dev/ic/ahcisata_core.c

218

aprint_error("%s: more ports than announced\n",

sys/dev/ic/ahcisata_core.c

353

aprint_error("%s: unable to allocate command header memory"

sys/dev/ic/ahcisata_core.c

361

aprint_error("%s: unable to map command header memory"

sys/dev/ic/ahcisata_core.c

368

aprint_error("%s: unable to create command header map"

sys/dev/ic/ahcisata_core.c

375

aprint_error("%s: unable to load command header map"

sys/dev/ic/ahcisata_core.c

395

aprint_error("%s: more ports than announced\n",

sys/dev/ic/ahcisata_core.c

402

aprint_error("%s: intr establish hook failed\n",

sys/dev/ic/ahcisata_core.c

414

aprint_error("%s port %d: can't allocate memory for "

sys/dev/ic/ahcisata_core.c

423

aprint_error("%s: unable to allocate command table "

sys/dev/ic/ahcisata_core.c

431

aprint_error("%s: unable to map command table memory"

sys/dev/ic/ahcisata_core.c

438

aprint_error("%s: unable to create command table map"

sys/dev/ic/ahcisata_core.c

445

aprint_error("%s: unable to load command table map"

sys/dev/ic/ahcisata_core.c

486

aprint_error("%s: couldn't alloc xfer DMA map, "

sys/dev/ic/ahcisata_core.c

494

aprint_error("%s: couldn't map port %d "

sys/dev/ic/ahcisata_core.c

500

aprint_error("%s: couldn't map port %d "

sys/dev/ic/ahcisata_core.c

506

aprint_error("%s: couldn't map port %d "

sys/dev/ic/ahcisata_core.c

555

aprint_error("%s: more ports than announced\n",

sys/dev/ic/ahcisata_core.c

871

aprint_error("%s port %d: DMA engine busy "

sys/dev/ic/ahcisata_core.c

913

aprint_error("%s port %d: setting WDCTL_RST failed "

sys/dev/ic/ahcisata_core.c

953

aprint_error("%s port %d: clearing WDCTL_RST failed "

sys/dev/ic/ahcisata_core.c

970

aprint_error("%s: BSY never cleared, TD 0x%x\n",

sys/dev/ic/arcofi.c

1193

aprint_error("%s: %02x command failed, error %d\n",

sys/dev/ic/bcmgenet.c

1066

aprint_error(": GENETv%d.%d not supported\n", maj, min);

sys/dev/ic/bwi.c

651

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/ic/bwi.c

711

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/ic/ciss.c

141

aprint_error(": cannot allocate perf area (%d)\n", error);

sys/dev/ic/ciss.c

147

aprint_error(": cannot map perf area (%d)\n", error);

sys/dev/ic/ciss.c

154

aprint_error(": cannot create perf dmamap (%d)\n", error);

sys/dev/ic/ciss.c

163

aprint_error(": cannot load perf dmamap (%d)\n", error);

sys/dev/ic/ciss.c

227

aprint_error(": bad sign 0x%08x\n", sc->cfg.signature);

sys/dev/ic/ciss.c

232

aprint_error(": no supported method 0x%08x\n", sc->cfg.methods);

sys/dev/ic/ciss.c

280

aprint_error(": cannot set config\n");

sys/dev/ic/ciss.c

288

aprint_error(": cannot set method 0x%08x\n", sc->cfg.amethod);

sys/dev/ic/ciss.c

304

aprint_error(": she never came ready for me 0x%08x\n",

sys/dev/ic/ciss.c

316

aprint_error(": cannot allocate CCBs (%d)\n", error);

sys/dev/ic/ciss.c

322

aprint_error(": cannot map CCBs (%d)\n", error);

sys/dev/ic/ciss.c

329

aprint_error(": cannot create CCBs dmamap (%d)\n", error);

sys/dev/ic/ciss.c

336

aprint_error(": cannot load CCBs dmamap (%d)\n", error);

sys/dev/ic/ciss.c

370

aprint_error(": cannot create ccb#%d dmamap (%d)\n", i, error);

sys/dev/ic/ciss.c

381

aprint_error(": cannot allocate scratch buffer (%d)\n", error);

sys/dev/ic/ciss.c

387

aprint_error(": cannot map scratch buffer (%d)\n", error);

sys/dev/ic/ciss.c

396

aprint_error(": adapter inquiry failed\n");

sys/dev/ic/ciss.c

404

aprint_error(": big map is not supported, flags=0x%x\n",

sys/dev/ic/depca.c

196

aprint_error("depca: address not found\n");

sys/dev/ic/depca.c

221

aprint_error("depca: checksum mismatch; "

sys/dev/ic/depca.c

248

aprint_error("\n");

sys/dev/ic/depca.c

297

aprint_error("%s", device_xname(self));

sys/dev/ic/dwc_eqos.c

1750

aprint_error(": EQOS version 0x%02x not supported\n",

sys/dev/ic/dwc_eqos.c

1756

aprint_error(": CSR clock too low\n");

sys/dev/ic/dwc_eqos.c

1775

aprint_error(": CSR clock too high\n");

sys/dev/ic/elink3.c

579

aprint_error("no media present!\n");

sys/dev/ic/elink3.c

650

aprint_error("no media present!\n");

sys/dev/ic/elinkxl.c

1084

aprint_error("aborting\n");

sys/dev/ic/elinkxl.c

1093

aprint_error("aborting\n");

sys/dev/ic/elinkxl.c

1102

aprint_error("retrying\n");

sys/dev/ic/elinkxl.c

823

aprint_error(" unknown Tx error");

sys/dev/ic/elinkxl.c

826

aprint_error(" @%d", sc->tx_start_thresh);

sys/dev/ic/elinkxl.c

830

aprint_error(", new threshold is %d", i);

sys/dev/ic/elinkxl.c

835

aprint_error("\n");

sys/dev/ic/i128.c

59

aprint_error("i128: unsupported colour depth (%d)\n",

sys/dev/ic/i82596.c

597

aprint_error(": can't allocate %d bytes of DMA memory\n",

sys/dev/ic/i82596.c

604

aprint_error(": can't map DMA memory\n");

sys/dev/ic/i82596.c

611

aprint_error(": can't create DMA map\n");

sys/dev/ic/i82596.c

620

aprint_error(": can't load DMA map\n");

sys/dev/ic/igsfb_subr.c

508

aprint_error("igsfb: unsupported depth (%d), reverting"

sys/dev/ic/interwave.c

227

aprint_error("\niwattach: couldn't get a suitable irq\n");

sys/dev/ic/lan9118.c

169

aprint_error(": failed to detect chip\n");

sys/dev/ic/ld_cac.c

101

aprint_error(": CMD_GET_LOG_DRV_INFO failed\n");

sys/dev/ic/ld_icp.c

121

aprint_error(": unable to retrieve device info\n");

sys/dev/ic/lsi64854.c

102

aprint_error(": unknown channel");

sys/dev/ic/lsi64854.c

109

aprint_error(": DMA map create failed\n");

sys/dev/ic/mvsata.c

1574

aprint_error("drive fault\n");

sys/dev/ic/mvsata.c

1579

aprint_error("error (%x)\n", ata_bio->r_error);

sys/dev/ic/mvsata.c

3004

aprint_error("%s:%d: can't subregion EDMA %d registers\n",

sys/dev/ic/mvsata.c

3012

aprint_error("%s:%d:%d: couldn't subregion sstatus regs\n",

sys/dev/ic/mvsata.c

3019

aprint_error("%s:%d:%d: couldn't subregion serror regs\n",

sys/dev/ic/mvsata.c

3030

aprint_error("%s:%d:%d: couldn't subregion scontrol regs\n",

sys/dev/ic/mvsata.c

3051

aprint_error(

sys/dev/ic/mvsata.c

3059

aprint_error(

sys/dev/ic/mvsata.c

3067

aprint_error(

sys/dev/ic/mvsata.c

3077

aprint_error("%s:%d:%d:"

sys/dev/ic/mvsata.c

3112

aprint_error("%s:%d:%d: couldn't subregion shadow block regs\n",

sys/dev/ic/mvsata.c

3123

aprint_error("%s:%d:%d: couldn't subregion cmd regs\n",

sys/dev/ic/mvsata.c

3132

aprint_error("%s:%d:%d: couldn't subregion cmd regs\n",

sys/dev/ic/mvsata.c

3143

aprint_error("%s:%d:%d: couldn't subregion SATA regs\n",

sys/dev/ic/mvsata.c

3151

aprint_error("%s:%d:%d: couldn't subregion SControl\n",

sys/dev/ic/mvsata.c

3158

aprint_error("%s:%d:%d: couldn't subregion SStatus\n",

sys/dev/ic/mvsata.c

3165

aprint_error("%s:%d:%d: couldn't subregion SError\n",

sys/dev/ic/mvsata.c

3186

aprint_error("%s:%d:%d: DMA memory alloc failed: error=%d\n",

sys/dev/ic/mvsata.c

3194

aprint_error("%s:%d:%d: DMA memory map failed: error=%d\n",

sys/dev/ic/mvsata.c

3203

aprint_error("%s:%d:%d: DMA map load failed: error=%d\n",

sys/dev/ic/mvsata.c

3246

aprint_error("%s:%d:%d: buffer load failed: error=%d\n",

sys/dev/ic/mvsata.c

3373

aprint_error("%s:%d:%d: %s: timeout\n",

sys/dev/ic/mvsata.c

3429

aprint_error("%s:%d:%d: unable to disable EDMA\n",

sys/dev/ic/mvsata.c

546

aprint_error("%s:%d:%d: device error, recovering\n",

sys/dev/ic/ncr53c9x.c

205

aprint_error(": unknown variant %d, devices not attached\n",

sys/dev/ic/ninjaata32.c

118

aprint_error("%s: unable to allocate sgt page, error = %d\n",

sys/dev/ic/ninjaata32.c

126

aprint_error("%s: unable to map sgt page, error = %d\n",

sys/dev/ic/ninjaata32.c

134

aprint_error("%s: unable to create sgt DMA map, error = %d\n",

sys/dev/ic/ninjaata32.c

141

aprint_error("%s: unable to load sgt DMA map, error = %d\n",

sys/dev/ic/ninjaata32.c

161

aprint_error("%s: failed to create DMA map "

sys/dev/ic/ninjaata32.c

201

aprint_error("%s: couldn't subregion cmd regs\n",

sys/dev/ic/ninjaata32.c

214

aprint_error("%s: couldn't subregion ctl regs\n",

sys/dev/ic/ninjaata32.c

286

aprint_error("%s: unhandled intr: irq %#x, bm %#x, ",

sys/dev/ic/oosiop.c

139

aprint_error(": failed to allocate script memory, err=%d\n",

sys/dev/ic/oosiop.c

146

aprint_error(": failed to map script memory, err=%d\n", err);

sys/dev/ic/oosiop.c

152

aprint_error(": failed to create script map, err=%d\n", err);

sys/dev/ic/oosiop.c

158

aprint_error(": failed to load script map, err=%d\n", err);

sys/dev/ic/opl.c

152

aprint_error("\nopl: find failed\n");

sys/dev/ic/osiop.c

191

aprint_error(": failed to allocate script memory, err=%d\n",

sys/dev/ic/osiop.c

198

aprint_error(": failed to map script memory, err=%d\n", err);

sys/dev/ic/osiop.c

204

aprint_error(": failed to create script map, err=%d\n", err);

sys/dev/ic/osiop.c

210

aprint_error(": failed to load script map, err=%d\n", err);

sys/dev/ic/osiop.c

228

aprint_error(": failed to allocate ds memory, err=%d\n", err);

sys/dev/ic/osiop.c

235

aprint_error(": failed to map ds memory, err=%d\n", err);

sys/dev/ic/osiop.c

243

aprint_error(": failed to create ds map, err=%d\n", err);

sys/dev/ic/osiop.c

249

aprint_error(": failed to load ds map, err=%d\n", err);

sys/dev/ic/osiop.c

273

aprint_error(": failed to create datadma map, err=%d\n",

sys/dev/ic/pckbc.c

290

aprint_error(": attach failed\n");

sys/dev/ic/pckbc.c

299

aprint_error("pckbc: cmd word write error\n");

sys/dev/ic/pckbc.c

337

aprint_error("pckbc: aux echo error 1\n");

sys/dev/ic/pckbc.c

341

aprint_error("pckbc: aux echo error 2\n");

sys/dev/ic/pckbc.c

383

aprint_error("pckbc: cmd word write error\n");

sys/dev/ic/rs5c313.c

80

aprint_error("unknown model (%d)\n", sc->sc_model);

sys/dev/ic/scmd.c

598

aprint_error("%s: unable to attach devsw: %d\n",

sys/dev/ic/scmd.c

606

aprint_error("%s: unable to init component: %d\n",

sys/dev/ic/sgec.c

107

aprint_error(

sys/dev/ic/sgec.c

115

aprint_error(

sys/dev/ic/sgec.c

124

aprint_error(

sys/dev/ic/sgec.c

144

aprint_error(": unable to create tx DMA map %d, error = %d\n",

sys/dev/ic/sgec.c

157

aprint_error(": unable to create rx DMA map %d, error = %d\n",

sys/dev/ic/sgec.c

170

aprint_error(

sys/dev/ic/sgec.c

99

aprint_error(": unable to allocate control data, error = %d\n",

sys/dev/ic/siisata.c

1387

aprint_error("%s port %d: "

sys/dev/ic/siisata.c

762

aprint_error("%s port %d: reset failed\n",

sys/dev/ic/sl811hs.c

566

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/ic/ssdfb.c

278

aprint_error(": unknown display assembly\n");

sys/dev/ic/sti.c

316

aprint_error(": no code for the requested platform\n");

sys/dev/ic/sti.c

322

aprint_error(": cannot allocate %u bytes for code\n", size);

sys/dev/ic/sti.c

353

aprint_error(": uvm_map_protect failed (%d)\n", error);

sys/dev/ic/sti.c

527

aprint_error(": cannot initialize (%d)\n", error);

sys/dev/ic/sti.c

535

aprint_error(": error %d inquiring config\n", error);

sys/dev/ic/sti.c

571

aprint_error(": cannot initialize (%d)\n", error);

sys/dev/ic/sti.c

618

aprint_error(": cannot fetch fonts (%d)\n", error);

sys/dev/ic/wdc.c

1100

aprint_error("%s channel %d: reset failed for",

sys/dev/ic/wdc.c

1936

aprint_error("%s:%d: %s\n", device_xname(atac->atac_dev),

sys/dev/ic/wdc.c

1939

aprint_error("%s:%d:%d: %s\n", device_xname(atac->atac_dev),

sys/dev/ic/wdc.c

394

aprint_error("%s:%d:%d: failed to set "

sys/dev/ieee1394/firewire.c

121

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/ieee1394/firewire.c

916

aprint_error("fw_xfer_free: xfer == NULL\n");

sys/dev/ieee1394/firewire.c

929

aprint_error("fw_xfer_free_buf: xfer == NULL\n");

sys/dev/ieee1394/fwmem.c

340

aprint_error("fwmem_read_quad: %d %04x:%08x\n",

sys/dev/ieee1394/fwmem.c

371

aprint_error("fwmem_write_quad: %d %04x:%08x %08x\n",

sys/dev/ieee1394/fwmem.c

404

aprint_error("fwmem_read_block: %d %04x:%08x %d\n",

sys/dev/ieee1394/fwmem.c

436

aprint_error("fwmem_write_block: %d %04x:%08x %d\n",

sys/dev/ieee1394/fwohci.c

108

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/ieee1394/fwohci.c

2423

aprint_error("dbdump err ch = %d cmd = 0x%08x\n", ch, cmd);

sys/dev/ieee1394/fwohci.c

2436

aprint_error("No Descriptor is found\n");

sys/dev/ieee1394/fwohci.c

2683

aprint_error("Unknown tcode %d\n", fp0->mode.common.tcode);

sys/dev/ieee1394/fwohci.c

3023

aprint_error(" skip buffer");

sys/dev/ieee1394/fwohci.c

3025

aprint_error(" #");

sys/dev/ieee1394/fwohci.c

3031

aprint_error(" done\n");

sys/dev/ieee1394/if_fwip.c

146

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/ieee1394/sbp.c

1063

aprint_error("%s: sbp_reset_start failed: resp=%d\n",

sys/dev/ieee1394/sbp.c

205

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/ieee1394/sbp.c

2147

aprint_error("target reset\n");

sys/dev/ieee1394/sbp.c

2151

aprint_error("reset start\n");

sys/dev/ieee1394/sbp.c

2171

aprint_error("run next request\n");

sys/dev/ieee1394/sbp.c

2192

aprint_error("agent reset\n");

sys/dev/ieee1394/sbp.c

2205

aprint_error("\n");

sys/dev/ipmi.c

1942

aprint_error("%s: %s:bus_space_map(..., %" PRIx64 ", %x"

sys/dev/isa/aps.c

255

aprint_error("aps: can't map i/o space\n");

sys/dev/isa/aps.c

310

aprint_error(": can't map i/o space\n");

sys/dev/isa/dpt_isa.c

276

aprint_error("can't map i/o space, error = %d\n", error);

sys/dev/isa/dpt_isa.c

285

aprint_error("unable to cascade DRQ, error = %d\n", error);

sys/dev/isa/dpt_isa.c

293

aprint_error("can't establish interrupt\n");

sys/dev/isa/dpt_isa.c

298

aprint_error("readcfg failed - see dpt(4)\n");

sys/dev/isa/ess.c

890

aprint_error(": setup failed\n");

sys/dev/isa/finsio_isa.c

474

aprint_error(": can't map configuration I/O space\n");

sys/dev/isa/finsio_isa.c

532

aprint_error(": can't map hwmon I/O space\n");

sys/dev/isa/finsio_isa.c

566

aprint_error(": unable to register with sysmon (%d)\n", rv);

sys/dev/isa/i82365_isa.c

200

aprint_error(": can't map i/o space\n");

sys/dev/isa/i82365_isa.c

207

aprint_error(": can't map mem space\n");

sys/dev/isa/if_ate.c

157

aprint_error("%s: irq mismatch; "

sys/dev/isa/if_ate.c

363

aprint_error(": can't map i/o space\n");

sys/dev/isa/if_ate.c

391

aprint_error(": where did the card go?!\n");

sys/dev/isa/if_ep_isa.c

361

aprint_error(": can't map i/o space\n");

sys/dev/isa/if_ep_isa.c

383

aprint_error(": unknown 3Com Ethernet card: %04x\n", chipset);

sys/dev/isa/if_fmv_isa.c

155

aprint_error("%s: irq mismatch; "

sys/dev/isa/if_fmv_isa.c

275

aprint_error(": can't map i/o space\n");

sys/dev/isa/if_iy.c

291

aprint_error(": can't map i/o space\n");

sys/dev/isa/if_iy.c

330

aprint_error("EEPROM Ethernet address differs from copy\n");

sys/dev/isa/if_iy.c

357

aprint_error("%s: EEPROM irq setting %d ignored\n",

sys/dev/isa/if_lc_isa.c

154

aprint_error(

sys/dev/isa/if_we_isa.c

220

aprint_error("%s%d: overriding configured "

sys/dev/isa/if_we_isa.c

232

aprint_error("%s%d: overriding configured "

sys/dev/isa/isv.c

247

aprint_error(": can't map i/o space\n");

sys/dev/isa/itesio_isa.c

224

aprint_error(": can't map pnp i/o space\n");

sys/dev/isa/itesio_isa.c

260

aprint_error(": unknown chipid: %04x", sc->sc_chipid);

sys/dev/isa/lm_isa_common.c

118

aprint_error(": can't map i/o space\n");

sys/dev/isa/mcd.c

270

aprint_error(": can't map i/o space\n");

sys/dev/isa/mcd.c

283

aprint_error(": mcd_find failed\n");

sys/dev/isa/nsclpcsio_isa.c

356

aprint_error(": can't map i/o space\n");

sys/dev/isa/opl_isa.c

112

aprint_error("opl_isa_attach: bus_space_map failed\n");

sys/dev/isa/ptcd.c

123

aprint_error(": can't map i/o space\n");

sys/dev/isa/sb.c

128

aprint_error("%s: configured DMA chan %d invalid\n",

sys/dev/isa/sb.c

135

aprint_error("%s: configured DMA chan %d invalid\n",

sys/dev/isa/sb.c

154

aprint_error("%s: configured DMA chan %d invalid\n",

sys/dev/isa/sb.c

164

aprint_error("%s: configured irq %d invalid\n",

sys/dev/isa/sb.c

171

aprint_error("%s: configured irq %d invalid\n",

sys/dev/isa/sb.c

181

aprint_error("%s: Cannot handle irq %d\n",

sys/dev/isa/sb.c

187

aprint_error("%s: Cannot handle drq16 %d\n",

sys/dev/isa/sb.c

193

aprint_error("%s: Cannot handle drq8 %d\n",

sys/dev/isa/sb.c

208

aprint_error("%s: setting drq mask %02x failed, "

sys/dev/isa/sb.c

229

aprint_error("%s: setting irq mask %02x failed, "

sys/dev/isa/slhci_isa.c

132

aprint_error("%s: can't map I/O space\n", SC_NAME(sc));

sys/dev/isa/slhci_isa.c

143

aprint_error("%s: can't establish interrupt\n", SC_NAME(sc));

sys/dev/isa/slhci_isa.c

149

aprint_error("%s: slhci_attach failed\n", SC_NAME(sc));

sys/dev/isa/smsc.c

159

aprint_error(": can't map base i/o space\n");

sys/dev/isa/smsc.c

188

aprint_error(": can't map register i/o space\n");

sys/dev/isa/smsc.c

231

aprint_error(": unable to register with sysmon (%d)\n", i);

sys/dev/isa/tcic2_isa.c

231

aprint_error(": can't map i/o space\n");

sys/dev/isa/tcic2_isa.c

238

aprint_error(": can't map mem space\n");

sys/dev/isa/ug_isa.c

126

aprint_error(": can't map i/o space\n");

sys/dev/isa/wbsio.c

254

aprint_error(": can't map i/o space\n");

sys/dev/isa/wdc_isa.c

177

aprint_error(": couldn't map registers\n");

sys/dev/isa/wdc_isa.c

185

aprint_error(": couldn't subregion registers\n");

sys/dev/isa/wt.c

289

aprint_error(": can't map i/o space\n");

sys/dev/isapnp/i82365_isapnp.c

148

aprint_error(" Not OK)\n");

sys/dev/isapnp/i82365_isapnp.c

154

aprint_error(": can't alloc mem space\n");

sys/dev/isapnp/if_fmv_isapnp.c

92

aprint_error(": can't configure isapnp resources\n");

sys/dev/isapnp/if_le_isapnp.c

181

aprint_error(": error in region allocation\n");

sys/dev/isapnp/if_le_isapnp.c

203

aprint_error(": couldn't allocate memory for card\n");

sys/dev/isapnp/if_le_isapnp.c

208

aprint_error(": couldn't map memory for card\n");

sys/dev/isapnp/if_le_isapnp.c

217

aprint_error(": couldn't create DMA map\n");

sys/dev/isapnp/if_le_isapnp.c

222

aprint_error(": couldn't load DMA map\n");

sys/dev/isapnp/if_le_isapnp.c

243

aprint_error(": unable to cascade DRQ, error = %d\n",

sys/dev/isapnp/wdc_isapnp.c

104

aprint_error(": couldn't map registers\n");

sys/dev/isapnp/wdc_isapnp.c

131

aprint_error(": couldn't subregion registers\n");

sys/dev/isapnp/wdc_isapnp.c

99

aprint_error(": unexpected configuration\n");

sys/dev/iscsi/iscsi_main.c

214

aprint_error("%s: couldn't register cfattach: %d\n",

sys/dev/iscsi/iscsi_main.c

221

aprint_error("%s: only one device supported\n",

sys/dev/iscsi/iscsi_main.c

699

aprint_error("%s: unable to register devsw\n",

sys/dev/iscsi/iscsi_main.c

713

aprint_error("%s: unable to register cfattach\n",

sys/dev/iscsi/iscsi_main.c

720

aprint_error("%s: unable to attach cfdata\n",

sys/dev/iscsi/iscsi_main.c

729

aprint_error("%s: config_attach_pseudo failed\n",

sys/dev/marvell/com_mv.c

107

aprint_error(": no frequency property\n");

sys/dev/marvell/com_mv.c

115

aprint_error(": can't map registers\n");

sys/dev/marvell/gt.c

535

aprint_error(", addr %#x", addr);

sys/dev/marvell/gt.c

536

aprint_error("\n");

sys/dev/marvell/gt.c

542

aprint_error(", addr %#x\n", addr);

sys/dev/marvell/gt.c

543

aprint_error("\n");

sys/dev/marvell/gt.c

795

aprint_error(" config error\n");

sys/dev/marvell/gtidmac.c

393

aprint_error(": no idmac-irq property\n");

sys/dev/marvell/gtidmac.c

407

aprint_error(": no xore-irq property\n");

sys/dev/marvell/gtidmac.c

606

aprint_error(": Error Address 0x%x\n", ear);

sys/dev/marvell/gtidmac.c

608

aprint_error(": lost Error Address\n");

sys/dev/marvell/gtidmac.c

703

aprint_error(": Error Address 0x%x\n", xeear);

sys/dev/marvell/gtidmac.c

705

aprint_error(": lost Error Address\n");

sys/dev/marvell/gtpci.c

474

aprint_error("io ");

sys/dev/marvell/gtpci.c

478

aprint_error("and ");

sys/dev/marvell/gtpci.c

480

aprint_error("mem");

sys/dev/marvell/gtpci.c

483

aprint_error(" access disabled\n");

sys/dev/marvell/gttwsi.c

133

aprint_error(": cannot map registers\n");

sys/dev/marvell/if_gfe.c

739

aprint_error(" (fi=%d(%#x),lo=%d,cur=%d(%#x),icm=%#x) ",

sys/dev/marvell/if_gfe.c

746

aprint_error("\n");

sys/dev/marvell/if_mvgbe.c

2285

aprint_error("%s: syctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/marvell/if_mvxpe.c

2802

aprint_error("%s: syctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/mca/com_mca.c

165

aprint_error(": can't map i/o space\n");

sys/dev/mca/com_mca.c

296

aprint_error(": not set to SERIAL mode, ignored\n");

sys/dev/mca/ed_mca.c

168

aprint_error(": IDENTIFY failed, no disk found\n");

sys/dev/mca/edc_mca.c

326

aprint_error("%s: disabling controller (no drives attached)\n",

sys/dev/mca/if_elmc_mca.c

143

aprint_error(": cannot determine irq\n");

sys/dev/mca/if_le_mca.c

212

aprint_error(": unknown product %d\n", ma->ma_id);

sys/dev/mca/if_le_mca.c

220

aprint_error(": can't map memory\n");

sys/dev/mca/if_we_mca.c

216

aprint_error("\n%s: where did the card go?\n",

sys/dev/md.c

156

aprint_error("%s: cfattach_attach failed\n", md_cd.cd_name);

sys/dev/mii/igphy.c

147

aprint_error("WARNING! Failed to get mactype\n");

sys/dev/mii/igphy.c

149

aprint_error("WARNING! Failed to get macflags\n");

sys/dev/mii/mii_physubr.c

513

aprint_error("no media present\n");

sys/dev/nand/nand.c

141

aprint_error("NAND chip is write protected!\n");

sys/dev/nand/nandemulator.c

149

aprint_error("%s: couldn't register cfattach: %d\n",

sys/dev/nand/nandemulator.c

768

aprint_error("%s: unable to register cfattach\n",

sys/dev/nand/nandemulator.c

779

aprint_error("%s: unable to register cfdata\n",

sys/dev/nor/nor.c

1039

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/nvmm/nvmm.c

1485

aprint_error("%s: cpu not supported\n",

sys/dev/nvmm/nvmm.c

1499

aprint_error("%s: config_cfattach_attach failed\n",

sys/dev/nvmm/nvmm.c

1510

aprint_error("%s: unable to register cfdata\n",

sys/dev/nvmm/nvmm.c

1516

aprint_error("%s: config_attach_pseudo failed\n",

sys/dev/nvmm/nvmm.c

1530

aprint_error("%s: unable to register devsw, err %d\n",

sys/dev/ofisa/com_ofisa.c

119

aprint_error(": error getting register data\n");

sys/dev/ofisa/com_ofisa.c

123

aprint_error(": weird register size (%lu, expected 8)\n",

sys/dev/ofisa/com_ofisa.c

133

aprint_error(": error getting interrupt data\n");

sys/dev/ofisa/com_ofisa.c

150

aprint_error(": can't map register space\n");

sys/dev/ofisa/ess_ofisa.c

100

aprint_error(": error getting register data\n");

sys/dev/ofisa/ess_ofisa.c

104

aprint_error(": register type not i/o\n");

sys/dev/ofisa/ess_ofisa.c

108

aprint_error(": weird register size (%lu, expected %d)\n",

sys/dev/ofisa/ess_ofisa.c

125

aprint_error(": error getting interrupt data\n");

sys/dev/ofisa/ess_ofisa.c

131

aprint_error(": error getting DMA data\n");

sys/dev/ofisa/ess_ofisa.c

143

aprint_error(": unable to map register space\n");

sys/dev/ofisa/ess_ofisa.c

155

aprint_error(": essmatch failed\n");

sys/dev/ofisa/if_cs_ofisa.c

128

aprint_error(": error getting register data\n");

sys/dev/ofisa/if_cs_ofisa.c

135

aprint_error(": multiple I/O regions\n");

sys/dev/ofisa/if_cs_ofisa.c

139

aprint_error(": weird register size (%lu, expected %d)\n",

sys/dev/ofisa/if_cs_ofisa.c

146

aprint_error(": multiple memory regions\n");

sys/dev/ofisa/if_cs_ofisa.c

150

aprint_error(": weird register size (%lu, expected %d)\n",

sys/dev/ofisa/if_cs_ofisa.c

163

aprint_error(": error getting interrupt data\n");

sys/dev/ofisa/if_cs_ofisa.c

169

aprint_error(": invalid IRQ %d\n", sc->sc_irq);

sys/dev/ofisa/if_cs_ofisa.c

182

aprint_error(": no I/O space\n");

sys/dev/ofisa/if_cs_ofisa.c

187

aprint_error(": unable to map register space\n");

sys/dev/ofisa/if_cs_ofisa.c

204

aprint_error(": unable to get Ethernet address\n");

sys/dev/ofisa/if_cs_ofisa.c

216

aprint_error(": unable to get media information\n");

sys/dev/ofisa/joy_ofisa.c

102

aprint_error(": weird register size (%lu, expected %d)\n",

sys/dev/ofisa/joy_ofisa.c

111

aprint_error(": unable to map register space\n");

sys/dev/ofisa/joy_ofisa.c

94

aprint_error(": error getting register data\n");

sys/dev/ofisa/joy_ofisa.c

98

aprint_error(": register type not i/o\n");

sys/dev/ofisa/lpt_ofisa.c

114

aprint_error(": error getting register data\n");

sys/dev/ofisa/lpt_ofisa.c

118

aprint_error(": weird register size (%lu, expected 4 or 8)\n",

sys/dev/ofisa/lpt_ofisa.c

128

aprint_error(": error getting interrupt data\n");

sys/dev/ofisa/lpt_ofisa.c

134

aprint_error(": can't map register space\n");

sys/dev/ofisa/mcclock_ofisa.c

138

aprint_error(": error getting register data\n");

sys/dev/ofisa/mcclock_ofisa.c

142

aprint_error(": weird register size (%lu, expected 2)\n",

sys/dev/ofisa/mcclock_ofisa.c

156

aprint_error(": can't map register space\n");

sys/dev/ofisa/sb_ofisa.c

106

aprint_error(": error getting register data\n");

sys/dev/ofisa/sb_ofisa.c

110

aprint_error(": register type not i/o\n");

sys/dev/ofisa/sb_ofisa.c

114

aprint_error(": weird register size (%lu, expected %d or %d)\n",

sys/dev/ofisa/sb_ofisa.c

121

aprint_error(": error getting interrupt data\n");

sys/dev/ofisa/sb_ofisa.c

127

aprint_error(": error getting DMA data\n");

sys/dev/ofisa/sb_ofisa.c

135

aprint_error(": unable to map register space\n");

sys/dev/ofisa/sb_ofisa.c

158

aprint_error(": weird DMA width %d\n", dma[n].width);

sys/dev/ofisa/sb_ofisa.c

164

aprint_error(": no 8-bit DMA channel\n");

sys/dev/ofisa/sb_ofisa.c

169

aprint_error(": sbmatch failed\n");

sys/dev/ofisa/wdc_ofisa.c

118

aprint_error(": error getting register data\n");

sys/dev/ofisa/wdc_ofisa.c

122

aprint_error(": weird register size (%lu/%lu, expected 8/2)\n",

sys/dev/ofisa/wdc_ofisa.c

132

aprint_error(": error getting interrupt data\n");

sys/dev/ofisa/wdc_ofisa.c

141

aprint_error(": can't map register spaces\n");

sys/dev/ofisa/wdc_ofisa.c

149

aprint_error(": can't subregion register space\n");

sys/dev/ofw/ofrtc.c

140

aprint_error(": cannot determine package path\n");

sys/dev/ofw/ofrtc.c

146

aprint_error(": cannot open path\n");

sys/dev/onewire/ds28e17iic.c

717

aprint_error("%s: unable to init component\n",

sys/dev/onewire/onewire.c

563

aprint_error("%s: unable to init component\n",

sys/dev/onewire/owtemp.c

342

aprint_error("%s: unable to init component\n",

sys/dev/pad/pad.c

195

aprint_error("%s: couldn't register cfattach: %d\n",

sys/dev/pci/aac_pci.c

564

aprint_error("can't enable bus-master feature\n");

sys/dev/pci/aac_pci.c

569

aprint_error("memory window not available\n");

sys/dev/pci/aac_pci.c

579

aprint_error("can't find mem space\n");

sys/dev/pci/aac_pci.c

585

aprint_error("couldn't map interrupt\n");

sys/dev/pci/aac_pci.c

592

aprint_error("couldn't establish interrupt");

sys/dev/pci/aac_pci.c

594

aprint_error(" at %s", intrstr);

sys/dev/pci/aac_pci.c

595

aprint_error("\n");

sys/dev/pci/aceride.c

375

aprint_error("%s:%d: bogus intr\n",

sys/dev/pci/adv_pci.c

149

aprint_error(": unknown model!\n");

sys/dev/pci/adv_pci.c

231

aprint_error(" at %s", intrstr);

sys/dev/pci/adv_pci.c

232

aprint_error("\n");

sys/dev/pci/adw_pci.c

132

aprint_error(": unknown model!\n");

sys/dev/pci/adw_pci.c

185

aprint_error(" at %s", intrstr);

sys/dev/pci/adw_pci.c

186

aprint_error("\n");

sys/dev/pci/agp_ali.c

109

aprint_error(": failed to set aperture\n");

sys/dev/pci/agp_ali.c

88

aprint_error(": failed to map aperture\n");

sys/dev/pci/agp_amd.c

181

aprint_error(": can't map AGP registers\n");

sys/dev/pci/agp_amd.c

188

aprint_error(": can't map aperture\n");

sys/dev/pci/agp_amd.c

209

aprint_error(": can't set aperture\n");

sys/dev/pci/agp_amd64.c

214

aprint_error(": can't map aperture\n");

sys/dev/pci/agp_amd64.c

231

aprint_error(": No Miscellaneous Control unit found.\n");

sys/dev/pci/agp_apple.c

107

aprint_error(": can't set aperture size\n");

sys/dev/pci/agp_apple.c

114

aprint_error("gatt: %08jx %ju MB\n", (uintmax_t)gatt->ag_physical,

sys/dev/pci/agp_apple.c

136

aprint_error("%s: ", __func__);

sys/dev/pci/agp_apple.c

139

aprint_error("%08x\n", apsize);

sys/dev/pci/agp_apple.c

151

aprint_error("%s: %08x\n", __func__, aperture);

sys/dev/pci/agp_i810.c

1181

aprint_error(": Unknown chipset\n");

sys/dev/pci/agp_i810.c

340

aprint_error(": can't find internal VGA"

sys/dev/pci/agp_intel.c

129

aprint_error(": can't map aperture\n");

sys/dev/pci/agp_intel.c

178

aprint_error(": failed to set aperture\n");

sys/dev/pci/agp_nvidia.c

135

aprint_error(": can't map aperture\n");

sys/dev/pci/agp_nvidia.c

154

aprint_error(": failed to set aperture\n");

sys/dev/pci/agp_sis.c

107

aprint_error(": failed to set aperture\n");

sys/dev/pci/agp_sis.c

89

aprint_error(": can't map aperture\n");

sys/dev/pci/agp_via.c

114

aprint_error(": can't map aperture\n");

sys/dev/pci/agp_via.c

132

aprint_error(": can't set aperture size\n");

sys/dev/pci/ahc_pci.c

848

aprint_error(": unable to map registers\n");

sys/dev/pci/ahc_pci.c

947

aprint_error("%s: couldn't map interrupt\n", ahc_name(ahc));

sys/dev/pci/ahc_pci.c

958

aprint_error(" at %s", intrstr);

sys/dev/pci/ahc_pci.c

959

aprint_error("\n");

sys/dev/pci/ahcisata_pci.c

386

aprint_error(" at %s", intrstr);

sys/dev/pci/ahcisata_pci.c

387

aprint_error("\n");

sys/dev/pci/ahd_pci.c

1118

aprint_error("%s: Unable to attach to "

sys/dev/pci/ahd_pci.c

428

aprint_error("%s: unknown memory type: 0x%x\n",

sys/dev/pci/ahd_pci.c

471

aprint_error("%s: unable to map registers\n", ahd_name(ahd));

sys/dev/pci/ahd_pci.c

525

aprint_error("%s: couldn't map interrupt\n", ahd_name(ahd));

sys/dev/pci/ahd_pci.c

533

aprint_error("%s: couldn't establish interrupt",

sys/dev/pci/ahd_pci.c

536

aprint_error(" at %s", intrstr);

sys/dev/pci/ahd_pci.c

537

aprint_error("\n");

sys/dev/pci/ahd_pci.c

782

aprint_error("%s: No SEEPROM available.\n", ahd_name(ahd));

sys/dev/pci/ahd_pci.c

874

aprint_error("%s: Unable to set termination settings!\n",

sys/dev/pci/amr.c

323

aprint_error("can't map control registers\n");

sys/dev/pci/amr.c

339

aprint_error("can't map interrupt\n");

sys/dev/pci/amr.c

347

aprint_error("can't establish interrupt");

sys/dev/pci/amr.c

349

aprint_error(" at %s", intrstr);

sys/dev/pci/amr.c

350

aprint_error("\n");

sys/dev/pci/arcmsr.c

1775

aprint_error("%s: unable to query firmware for sensor info\n",

sys/dev/pci/arcmsr.c

496

aprint_error("%s: error %d loading dmamap\n",

sys/dev/pci/arcmsr.c

620

aprint_error(": unable to map system interface register\n");

sys/dev/pci/arcmsr.c

625

aprint_error(": unable to map interrupt\n");

sys/dev/pci/arcmsr.c

634

aprint_error(": unable to map interrupt [2]\n");

sys/dev/pci/artsata.c

152

aprint_error(" at %s", intrstr);

sys/dev/pci/artsata.c

153

aprint_error("\n");

sys/dev/pci/atppc_puc.c

105

aprint_error(": polling not supported\n");

sys/dev/pci/atppc_puc.c

125

aprint_error(" at %s", intrstr);

sys/dev/pci/atppc_puc.c

126

aprint_error("\n");

sys/dev/pci/auacer.c

260

aprint_error(": can't map i/o space\n");

sys/dev/pci/auacer.c

291

aprint_error(" at %s", intrstr);

sys/dev/pci/auacer.c

292

aprint_error("\n");

sys/dev/pci/auich.c

553

aprint_error(" at %s", intrstr);

sys/dev/pci/auich.c

554

aprint_error("\n");

sys/dev/pci/auixp.c

1123

aprint_error(" at %s", intrstr);

sys/dev/pci/auixp.c

1124

aprint_error("\n");

sys/dev/pci/autri.c

541

aprint_error(" at %s", intrstr);

sys/dev/pci/autri.c

542

aprint_error("\n");

sys/dev/pci/auvia.c

358

aprint_error(": can't map i/o space\n");

sys/dev/pci/auvia.c

411

aprint_error(": couldn't map interrupt\n");

sys/dev/pci/auvia.c

425

aprint_error(" at %s", intrstr);

sys/dev/pci/auvia.c

426

aprint_error("\n");

sys/dev/pci/bha_pci.c

141

aprint_error(" at %s", intrstr);

sys/dev/pci/bha_pci.c

142

aprint_error("\n");

sys/dev/pci/bktr/bktr_os.c

1490

aprint_error("%s: couldn't map memory\n", bktr_name(bktr));

sys/dev/pci/bktr/bktr_os.c

1504

aprint_error("%s: couldn't map interrupt\n",

sys/dev/pci/bktr/bktr_os.c

1512

aprint_error("%s: couldn't establish interrupt",

sys/dev/pci/btvmei.c

149

aprint_error(" at %s", intrstr);

sys/dev/pci/btvmei.c

150

aprint_error("\n");

sys/dev/pci/cac_pci.c

206

aprint_error("can't map interrupt\n");

sys/dev/pci/cac_pci.c

213

aprint_error("can't establish interrupt");

sys/dev/pci/cac_pci.c

215

aprint_error(" at %s", intrstr);

sys/dev/pci/cac_pci.c

216

aprint_error("\n");

sys/dev/pci/ciss_pci.c

276

aprint_error(" at %s", intrstr);

sys/dev/pci/ciss_pci.c

277

aprint_error("\n");

sys/dev/pci/cmpci.c

406

aprint_error(" at %s", strintr);

sys/dev/pci/cmpci.c

407

aprint_error("\n");

sys/dev/pci/com_puc.c

115

aprint_error("couldn't establish interrupt");

sys/dev/pci/com_puc.c

117

aprint_error(" at %s", intrstr);

sys/dev/pci/com_puc.c

118

aprint_error("\n");

sys/dev/pci/coram.c

197

aprint_error(" at %s", intrstr);

sys/dev/pci/coram.c

198

aprint_error("\n");

sys/dev/pci/cs4280.c

332

aprint_error(" at %s", intrstr);

sys/dev/pci/cs4280.c

333

aprint_error("\n");

sys/dev/pci/cs4281.c

256

aprint_error(" at %s", intrstr);

sys/dev/pci/cs4281.c

257

aprint_error("\n");

sys/dev/pci/cxdtv.c

222

aprint_error(" at %s", intrstr);

sys/dev/pci/cxdtv.c

223

aprint_error("\n");

sys/dev/pci/cy_pci.c

145

aprint_error(" at %s", intrstr);

sys/dev/pci/cy_pci.c

146

aprint_error("\n");

sys/dev/pci/cz.c

353

aprint_error(" at %s", intrstr);

sys/dev/pci/cz.c

354

aprint_error("\n");

sys/dev/pci/dpt_pci.c

101

aprint_error("can't map i/o space\n");

sys/dev/pci/dpt_pci.c

107

aprint_error("can't map i/o subregion\n");

sys/dev/pci/dpt_pci.c

120

aprint_error("can't map interrupt\n");

sys/dev/pci/dpt_pci.c

127

aprint_error("can't establish interrupt");

sys/dev/pci/dpt_pci.c

129

aprint_error(" at %s", intrstr);

sys/dev/pci/dpt_pci.c

130

aprint_error("\n");

sys/dev/pci/eap.c

614

aprint_error(" at %s", intrstr);

sys/dev/pci/eap.c

615

aprint_error("\n");

sys/dev/pci/ehci_pci.c

208

aprint_error(" at %s", intrstr);

sys/dev/pci/ehci_pci.c

209

aprint_error("\n");

sys/dev/pci/emuxki.c

419

aprint_error(": can't map iospace\n");

sys/dev/pci/emuxki.c

434

aprint_error(" at %s", intrstr);

sys/dev/pci/emuxki.c

435

aprint_error("\n");

sys/dev/pci/emuxki.c

459

aprint_error("emuxki_init error\n");

sys/dev/pci/emuxki.c

463

aprint_error("emuxki_ac97_init error\n");

sys/dev/pci/emuxki.c

469

aprint_error("audio_attach_mi error\n");

sys/dev/pci/esa.c

991

aprint_error(" at %s", intrstr);

sys/dev/pci/esa.c

992

aprint_error("\n");

sys/dev/pci/esm.c

1557

aprint_error(" at %s", intrstr);

sys/dev/pci/esm.c

1558

aprint_error("\n");

sys/dev/pci/eso.c

382

aprint_error(" at %s", intrstring);

sys/dev/pci/eso.c

383

aprint_error("\n");

sys/dev/pci/eso.c

492

aprint_error("can't map Audio 1 DMA into I/O space\n");

sys/dev/pci/fms.c

275

aprint_error(" at %s", intrstr);

sys/dev/pci/fms.c

276

aprint_error("\n");

sys/dev/pci/fwohci_pci.c

149

aprint_error(" at %s", intrstr);

sys/dev/pci/fwohci_pci.c

150

aprint_error("\n");

sys/dev/pci/gcscaudio.c

298

aprint_error(" at %s", intrstr);

sys/dev/pci/gcscaudio.c

299

aprint_error("\n");

sys/dev/pci/gffb.c

263

aprint_error("%s: no width property\n", device_xname(self));

sys/dev/pci/gffb.c

267

aprint_error("%s: no height property\n", device_xname(self));

sys/dev/pci/gffb.c

277

aprint_error("%s: no depth property\n", device_xname(self));

sys/dev/pci/gffb.c

281

aprint_error("%s: no linebytes property\n",

sys/dev/pci/gffb.c

298

aprint_error("%s: failed to map registers.\n",

sys/dev/pci/gffb.c

316

aprint_error("%s: can't find the framebuffer?!\n",

sys/dev/pci/gffb.c

325

aprint_error("%s: failed to map the framebuffer.\n",

sys/dev/pci/gtp.c

154

aprint_error(": can't map i/o space\n");

sys/dev/pci/hdaudio_pci.c

177

aprint_error(" at %s", intrstr);

sys/dev/pci/hdaudio_pci.c

178

aprint_error("\n");

sys/dev/pci/hifn7751.c

382

aprint_error(" at %s", intrstr);

sys/dev/pci/hifn7751.c

383

aprint_error("\n");

sys/dev/pci/hptide.c

405

aprint_error("%s:%d: bogus intr\n",

sys/dev/pci/i82365_pci.c

127

aprint_error(": can't map i/o space\n");

sys/dev/pci/ibmcd.c

109

aprint_error("\n");

sys/dev/pci/ibmcd.c

226

aprint_error("%s: unable to init component\n",

sys/dev/pci/icp_pci.c

273

aprint_error("cannot map DPMEM\n");

sys/dev/pci/icp_pci.c

289

aprint_error("cannot map memory mapped I/O ports\n");

sys/dev/pci/icp_pci.c

296

aprint_error("cannot map I/O ports\n");

sys/dev/pci/icp_pci.c

310

aprint_error("cannot write to DPMEM\n");

sys/dev/pci/icp_pci.c

382

aprint_error("cannot write to DPMEM\n");

sys/dev/pci/icp_pci.c

457

aprint_error(

sys/dev/pci/icp_pci.c

493

aprint_error("DEINIT failed\n");

sys/dev/pci/icp_pci.c

504

aprint_error("unsupported protocol %d\n", protocol);

sys/dev/pci/icp_pci.c

525

aprint_error("initialization error\n");

sys/dev/pci/icp_pci.c

544

aprint_error("couldn't map interrupt\n");

sys/dev/pci/icp_pci.c

551

aprint_error("couldn't establish interrupt");

sys/dev/pci/icp_pci.c

553

aprint_error(" at %s", intrstr);

sys/dev/pci/icp_pci.c

554

aprint_error("\n");

sys/dev/pci/if_age.c

197

aprint_error(" at %s", intrstr);

sys/dev/pci/if_age.c

198

aprint_error("\n");

sys/dev/pci/if_ale.c

440

aprint_error(" at %s", intrstr);

sys/dev/pci/if_ale.c

441

aprint_error("\n");

sys/dev/pci/if_an_pci.c

156

aprint_error(" at %s", intrstr);

sys/dev/pci/if_an_pci.c

157

aprint_error("\n");

sys/dev/pci/if_ath_pci.c

196

aprint_error("couldn't map interrupt\n");

sys/dev/pci/if_ath_pci.c

204

aprint_error("couldn't map interrupt\n");

sys/dev/pci/if_atw_pci.c

264

aprint_error(" at %s", intrstr);

sys/dev/pci/if_atw_pci.c

265

aprint_error("\n");

sys/dev/pci/if_bce.c

333

aprint_error(" at %s", intrstr);

sys/dev/pci/if_bce.c

334

aprint_error("\n");

sys/dev/pci/if_bge.c

3654

aprint_error(" at %s", intrstr);

sys/dev/pci/if_bge.c

3655

aprint_error("\n");

sys/dev/pci/if_bge.c

6454

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/pci/if_bwi_pci.c

174

aprint_error(" at %s", intrstr);

sys/dev/pci/if_bwi_pci.c

175

aprint_error("\n");

sys/dev/pci/if_cas.c

1136

aprint_error("cas: invalid Receive Descriptor ring size %d\n",

sys/dev/pci/if_cas.c

1151

aprint_error("cas: invalid completion ring size %d\n", sz);

sys/dev/pci/if_cas.c

1949

aprint_error(" at %s", intrstr);

sys/dev/pci/if_cas.c

1950

aprint_error("\n");

sys/dev/pci/if_dge.c

747

aprint_error(" at %s", intrstr);

sys/dev/pci/if_dge.c

748

aprint_error("\n");

sys/dev/pci/if_ep_pci.c

190

aprint_error(": can't map i/o space\n");

sys/dev/pci/if_ep_pci.c

226

aprint_error(" at %s", intrstr);

sys/dev/pci/if_ep_pci.c

227

aprint_error("\n");

sys/dev/pci/if_epic_pci.c

226

aprint_error(" at %s", intrstr);

sys/dev/pci/if_epic_pci.c

227

aprint_error("\n");

sys/dev/pci/if_eqos_pci.c

123

aprint_error(": can't map mem space\n");

sys/dev/pci/if_et.c

212

aprint_error(" at %s", intrstr);

sys/dev/pci/if_et.c

213

aprint_error("\n");

sys/dev/pci/if_ex_pci.c

222

aprint_error(": can't map i/o space\n");

sys/dev/pci/if_ex_pci.c

296

aprint_error(" at %s", intrstr);

sys/dev/pci/if_ex_pci.c

297

aprint_error("\n");

sys/dev/pci/if_fxp_pci.c

387

aprint_error(": unable to map device registers\n");

sys/dev/pci/if_fxp_pci.c

540

aprint_error(" at %s", intrstr);

sys/dev/pci/if_fxp_pci.c

541

aprint_error("\n");

sys/dev/pci/if_gem_pci.c

407

aprint_error(" at %s", intrstr);

sys/dev/pci/if_gem_pci.c

408

aprint_error("\n");

sys/dev/pci/if_hme_pci.c

308

aprint_error(" at %s", intrstr);

sys/dev/pci/if_hme_pci.c

309

aprint_error("\n");

sys/dev/pci/if_iavf.c

744

aprint_error(": unable to map registers\n");

sys/dev/pci/if_iavf.c

749

aprint_error(": VF reset timed out\n");

sys/dev/pci/if_iavf.c

765

aprint_error(": unable to allocate atq\n");

sys/dev/pci/if_iavf.c

771

aprint_error(": unable to allocate arq\n");

sys/dev/pci/if_iavf.c

784

aprint_error(": unable to fill arq descriptors\n");

sys/dev/pci/if_iavf.c

789

aprint_error(": unable to initialize admin queue\n");

sys/dev/pci/if_iavf.c

795

aprint_error(": unable to allocate buffer for ATQ\n");

sys/dev/pci/if_iavf.c

804

aprint_error(": timeout waiting for VF version\n");

sys/dev/pci/if_iavf.c

807

aprint_error(": unsupported VF version %d\n", sc->sc_major_ver);

sys/dev/pci/if_iavf.c

810

aprint_error(":unable to get VF interface version\n");

sys/dev/pci/if_iavf.c

815

aprint_error(": timeout waiting for VF resources\n");

sys/dev/pci/if_iavf.c

838

aprint_error(", timed out waiting for IRQ map response\n");

sys/dev/pci/if_ipw.c

228

aprint_error(" at %s", intrstr);

sys/dev/pci/if_ipw.c

229

aprint_error("\n");

sys/dev/pci/if_iwi.c

274

aprint_error(" at %s", intrstr);

sys/dev/pci/if_iwi.c

275

aprint_error("\n");

sys/dev/pci/if_iwi.c

2861

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/pci/if_iwi.c

2913

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/pci/if_iwm.c

9002

aprint_error(" at %s", intrstr);

sys/dev/pci/if_iwm.c

9003

aprint_error("\n");

sys/dev/pci/if_iwm.c

9508

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/pci/if_iwn.c

2782

aprint_error("firmware error log:\n");

sys/dev/pci/if_iwn.c

2783

aprint_error(" error type = \"%s\" (0x%08X)\n",

sys/dev/pci/if_iwn.c

2787

aprint_error(" program counter = 0x%08X\n", dump.pc);

sys/dev/pci/if_iwn.c

2788

aprint_error(" source line = 0x%08X\n", dump.src_line);

sys/dev/pci/if_iwn.c

2789

aprint_error(" error data = 0x%08X%08X\n",

sys/dev/pci/if_iwn.c

2791

aprint_error(" branch link = 0x%08X%08X\n",

sys/dev/pci/if_iwn.c

2793

aprint_error(" interrupt link = 0x%08X%08X\n",

sys/dev/pci/if_iwn.c

2795

aprint_error(" time = %u\n", dump.time[0]);

sys/dev/pci/if_iwn.c

2798

aprint_error("driver status:\n");

sys/dev/pci/if_iwn.c

2801

aprint_error(" tx ring %2d: qid=%-2d cur=%-3d queued=%-3d\n",

sys/dev/pci/if_iwn.c

2804

aprint_error(" rx ring: cur=%d\n", sc->rxq.cur);

sys/dev/pci/if_iwn.c

2805

aprint_error(" 802.11 state %d\n", sc->sc_ic.ic_state);

sys/dev/pci/if_iwn.c

499

aprint_error(" at %s", intrstr);

sys/dev/pci/if_iwn.c

500

aprint_error("\n");

sys/dev/pci/if_ixl.c

1047

aprint_error(": unable to map registers\n");

sys/dev/pci/if_ixl.c

1083

aprint_error("\n" "%s: unable to allocate atq\n",

sys/dev/pci/if_ixl.c

1095

aprint_error("\n" "%s: unable to allocate arq\n",

sys/dev/pci/if_ixl.c

1101

aprint_error("\n" "%s: unable to fill arq descriptors\n",

sys/dev/pci/if_ixl.c

1143

aprint_error(", unable to get firmware version\n");

sys/dev/pci/if_ixl.c

1166

aprint_error(", GET HW CAPABILITIES %s\n",

sys/dev/pci/if_ixl.c

4174

aprint_error(", HW capabilities timeout\n");

sys/dev/pci/if_ixl.c

4187

aprint_error(", HW capabilities error\n");

sys/dev/pci/if_ixl.c

4212

aprint_error(", unable to allocate mac addresses\n");

sys/dev/pci/if_ixl.c

4231

aprint_error(", MAC ADDRESS READ timeout\n");

sys/dev/pci/if_ixl.c

4236

aprint_error(", MAC ADDRESS READ error\n");

sys/dev/pci/if_ixl.c

5497

aprint_error(", Global reset polling failed to complete\n");

sys/dev/pci/if_ixl.c

5514

aprint_error(", wait for FW Reset complete timed out "

sys/dev/pci/if_ixl.c

5534

aprint_error(", Core reset upcoming."

sys/dev/pci/if_ixl.c

5540

aprint_error(", PF reset polling failed to complete"

sys/dev/pci/if_jme.c

2050

aprint_error("%s: syctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/pci/if_jme.c

382

aprint_error(" at %s", intrstr);

sys/dev/pci/if_jme.c

383

aprint_error("\n");

sys/dev/pci/if_kse.c

422

aprint_error(" at %s", intrstr);

sys/dev/pci/if_kse.c

423

aprint_error("\n");

sys/dev/pci/if_lii.c

302

aprint_error(" at %s", intrstr);

sys/dev/pci/if_lii.c

303

aprint_error("\n");

sys/dev/pci/if_malo_pci.c

172

aprint_error(" at %s", intrstr);

sys/dev/pci/if_malo_pci.c

173

aprint_error("\n");

sys/dev/pci/if_mcx.c

2777

aprint_error(": unable to map register memory\n");

sys/dev/pci/if_msk.c

1237

aprint_error(": can't alloc rx buffers\n");

sys/dev/pci/if_msk.c

1244

aprint_error(": can't map dma buffers (%zu bytes)\n",

sys/dev/pci/if_msk.c

1251

aprint_error(": can't create dma map\n");

sys/dev/pci/if_msk.c

1256

aprint_error(": can't load dma map\n");

sys/dev/pci/if_msk.c

1298

aprint_error(": jumbo buffer allocation failed\n");

sys/dev/pci/if_msk.c

1512

aprint_error(": can't map mem space\n");

sys/dev/pci/if_msk.c

1530

aprint_error(": unknown chip type: %d\n", sc->sk_type);

sys/dev/pci/if_msk.c

1537

aprint_error(": couldn't map interrupt\n");

sys/dev/pci/if_msk.c

1545

aprint_error(": couldn't establish interrupt");

sys/dev/pci/if_msk.c

1547

aprint_error(" at %s", intrstr);

sys/dev/pci/if_msk.c

1548

aprint_error("\n");

sys/dev/pci/if_msk.c

1557

aprint_error(": can't alloc status buffers\n");

sys/dev/pci/if_msk.c

1565

aprint_error(": can't map dma buffers (%zu bytes)\n",

sys/dev/pci/if_msk.c

1573

aprint_error(": can't create dma map\n");

sys/dev/pci/if_msk.c

1579

aprint_error(": can't load dma map\n");

sys/dev/pci/if_msk.c

2359

aprint_error("opcode=0x%x\n", cur_st->sk_opcode);

sys/dev/pci/if_msk.c

2893

aprint_error("%s: syctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/pci/if_msk.c

656

aprint_error(": can't alloc rx buffers");

sys/dev/pci/if_msk.c

664

aprint_error(": can't map dma buffers (%d bytes)", MSK_JMEM);

sys/dev/pci/if_msk.c

672

aprint_error(": can't create dma map");

sys/dev/pci/if_msk.c

680

aprint_error(": can't load dma map");

sys/dev/pci/if_mtd_pci.c

127

aprint_error(" at %s", intrstring);

sys/dev/pci/if_mtd_pci.c

128

aprint_error("\n");

sys/dev/pci/if_ne_pci.c

245

aprint_error(" at %s", intrstr);

sys/dev/pci/if_ne_pci.c

246

aprint_error("\n");

sys/dev/pci/if_nfe.c

251

aprint_error(" at %s", intrstr);

sys/dev/pci/if_nfe.c

252

aprint_error("\n");

sys/dev/pci/if_ntwoc_pci.c

245

aprint_error(" at %s", intrstr);

sys/dev/pci/if_ntwoc_pci.c

246

aprint_error("\n");

sys/dev/pci/if_pcn.c

704

aprint_error(" at %s", intrstr);

sys/dev/pci/if_pcn.c

705

aprint_error("\n");

sys/dev/pci/if_ral_pci.c

209

aprint_error(": could not map memory space\n");

sys/dev/pci/if_ral_pci.c

214

aprint_error(": could not map interrupt\n");

sys/dev/pci/if_ral_pci.c

223

aprint_error(": could not establish interrupt");

sys/dev/pci/if_ral_pci.c

225

aprint_error(" at %s", intrstr);

sys/dev/pci/if_ral_pci.c

226

aprint_error("\n");

sys/dev/pci/if_re_pci.c

262

aprint_error(": can't map registers\n");

sys/dev/pci/if_re_pci.c

305

aprint_error(" at %s", intrstr);

sys/dev/pci/if_re_pci.c

306

aprint_error("\n");

sys/dev/pci/if_rge.c

229

aprint_error(": can't map mem or i/o space\n");

sys/dev/pci/if_rge.c

237

aprint_error(": unable to allocate queue memory\n");

sys/dev/pci/if_rge.c

257

aprint_error(": couldn't map interrupt\n");

sys/dev/pci/if_rge.c

276

aprint_error(" at %s\n", intrstr);

sys/dev/pci/if_rge.c

277

aprint_error("\n");

sys/dev/pci/if_rge.c

320

aprint_error(": unknown version 0x%08x\n", hwrev);

sys/dev/pci/if_rtk_pci.c

222

aprint_error(" at %s", intrstr);

sys/dev/pci/if_rtk_pci.c

223

aprint_error("\n");

sys/dev/pci/if_rtw_pci.c

255

aprint_error(" at %s", intrstr);

sys/dev/pci/if_rtw_pci.c

256

aprint_error("\n");

sys/dev/pci/if_rtwn.c

262

aprint_error(" at %s", intrstr);

sys/dev/pci/if_rtwn.c

263

aprint_error("\n");

sys/dev/pci/if_sf_pci.c

248

aprint_error(" at %s", intrstr);

sys/dev/pci/if_sf_pci.c

249

aprint_error("\n");

sys/dev/pci/if_sip.c

1084

aprint_error("\n");

sys/dev/pci/if_sip.c

1208

aprint_error(" at %s", intrstr);

sys/dev/pci/if_sip.c

1209

aprint_error("\n");

sys/dev/pci/if_sk.c

1365

aprint_error("%s: jumbo buffer allocation failed\n",

sys/dev/pci/if_sk.c

1557

aprint_error(": failed to enable I/O ports!\n");

sys/dev/pci/if_sk.c

1566

aprint_error(": can't find i/o space\n");

sys/dev/pci/if_sk.c

1571

aprint_error(": failed to enable memory mapping!\n");

sys/dev/pci/if_sk.c

1610

aprint_error(": couldn't map interrupt\n");

sys/dev/pci/if_sk.c

1618

aprint_error(": couldn't establish interrupt");

sys/dev/pci/if_sk.c

1620

aprint_error(" at %s", intrstr);

sys/dev/pci/if_sk.c

1621

aprint_error("\n");

sys/dev/pci/if_sk.c

3124

aprint_error("%s: syctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/pci/if_ste.c

418

aprint_error(" at %s", intrstr);

sys/dev/pci/if_ste.c

419

aprint_error("\n");

sys/dev/pci/if_stge.c

486

aprint_error(" at %s", intrstr);

sys/dev/pci/if_stge.c

487

aprint_error("\n");

sys/dev/pci/if_ti.c

1629

aprint_error("ti_attach: were did the card go ?\n");

sys/dev/pci/if_ti.c

1675

aprint_error(" at %s", intrstr);

sys/dev/pci/if_ti.c

1676

aprint_error("\n");

sys/dev/pci/if_tl.c

395

aprint_error(" at %s", intrstr);

sys/dev/pci/if_tl.c

396

aprint_error("\n");

sys/dev/pci/if_tlp_pci.c

1024

aprint_error(" at %s", intrstr);

sys/dev/pci/if_tlp_pci.c

1025

aprint_error("\n");

sys/dev/pci/if_txp.c

227

aprint_error(": failed to enable bus mastering\n");

sys/dev/pci/if_txp.c

232

aprint_error(": failed to enable memory mapping\n");

sys/dev/pci/if_txp.c

237

aprint_error(": can't map mem space %d\n", 0);

sys/dev/pci/if_txp.c

250

aprint_error(": couldn't map interrupt\n");

sys/dev/pci/if_txp.c

258

aprint_error(": couldn't establish interrupt");

sys/dev/pci/if_vge.c

940

aprint_error(" at %s", intrstr);

sys/dev/pci/if_vge.c

941

aprint_error("\n");

sys/dev/pci/if_vr.c

1561

aprint_error(" at %s", intrstr);

sys/dev/pci/if_vr.c

1562

aprint_error("\n");

sys/dev/pci/if_vte.c

1696

aprint_error("%s: syctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/pci/if_vte.c

233

aprint_error(" at %s", intrstr);

sys/dev/pci/if_vte.c

234

aprint_error("\n");

sys/dev/pci/if_wi_pci.c

242

aprint_error(": can't map mem space\n");

sys/dev/pci/if_wi_pci.c

247

aprint_error(": can't map I/O space\n");

sys/dev/pci/if_wi_pci.c

257

aprint_error(": can't map PLX\n");

sys/dev/pci/if_wi_pci.c

271

aprint_error(": can't map TMD\n");

sys/dev/pci/if_wi_pci.c

276

aprint_error(": can't map I/O space\n");

sys/dev/pci/if_wi_pci.c

284

aprint_error(": can't map mem space\n");

sys/dev/pci/if_wi_pci.c

328

aprint_error(" at %s", intrstr);

sys/dev/pci/if_wi_pci.c

329

aprint_error("\n");

sys/dev/pci/if_wm.c

1878

aprint_error("%s: WARNING:"

sys/dev/pci/if_wpi.c

281

aprint_error(" at %s", intrstr);

sys/dev/pci/if_wpi.c

282

aprint_error("\n");

sys/dev/pci/if_wpi.c

3468

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/pci/if_xge.c

299

aprint_error("%s: unable to map PIF BAR registers\n", XNAME);

sys/dev/pci/if_xge.c

306

aprint_error("%s: unable to map TXP BAR registers\n", XNAME);

sys/dev/pci/if_xge.c

326

aprint_error("%s: failed configuring endian, %llx != %llx!\n",

sys/dev/pci/if_xge.c

364

aprint_error("%s: failed configuring endian2, %llx != %llx!\n",

sys/dev/pci/if_xge.c

393

aprint_error("%s: failed allocating txmem.\n", XNAME);

sys/dev/pci/if_xge.c

421

aprint_error("%s: cannot create TX DMA maps\n", XNAME);

sys/dev/pci/if_xge.c

433

aprint_error("%s: failed allocating rxmem\n", XNAME);

sys/dev/pci/if_xge.c

441

aprint_error("%s: cannot create RX DMA maps\n", XNAME);

sys/dev/pci/igsfb_pci.c

186

aprint_error("unable to map device registers\n");

sys/dev/pci/iha_pci.c

153

aprint_error(" at %s", intrstr);

sys/dev/pci/iha_pci.c

154

aprint_error("\n");

sys/dev/pci/iop_pci.c

137

aprint_error("can't find mapping\n");

sys/dev/pci/iop_pci.c

153

aprint_error("can't find mapping\n");

sys/dev/pci/iop_pci.c

187

aprint_error("can't map interrupt\n");

sys/dev/pci/iop_pci.c

194

aprint_error("can't establish interrupt");

sys/dev/pci/iop_pci.c

196

aprint_error(" at %s", intrstr);

sys/dev/pci/iop_pci.c

197

aprint_error("\n");

sys/dev/pci/isp_pci.c

519

aprint_error(": unable to map device registers\n");

sys/dev/pci/jmide.c

187

aprint_error("%s: couldn't map interrupt\n", JM_NAME(sc));

sys/dev/pci/jmide.c

195

aprint_error("%s: couldn't establish interrupt", JM_NAME(sc));

sys/dev/pci/jmide.c

224

aprint_error("%s: can't map ahci registers\n",

sys/dev/pci/lpt_puc.c

80

aprint_error(": polling not supported\n");

sys/dev/pci/lpt_puc.c

92

aprint_error("couldn't establish interrupt");

sys/dev/pci/lpt_puc.c

94

aprint_error(" at %s", intrstr);

sys/dev/pci/lpt_puc.c

95

aprint_error("\n");

sys/dev/pci/machfb.c

1148

aprint_error("%s: preposterous dot clock (%d)\n",

sys/dev/pci/mfi_pci.c

209

aprint_error(": can't find matching pci device\n");

sys/dev/pci/mfi_pci.c

223

aprint_error(": can't map controller pci space\n");

sys/dev/pci/mfi_pci.c

237

aprint_error(": can't map interrupt\n");

sys/dev/pci/mfi_pci.c

250

aprint_error(": can't establish interrupt");

sys/dev/pci/mfi_pci.c

252

aprint_error(" at %s", intrstr);

sys/dev/pci/mfi_pci.c

253

aprint_error("\n");

sys/dev/pci/mfi_pci.c

280

aprint_error("%s: can't attach", DEVNAME(sc));

sys/dev/pci/mfii.c

754

aprint_error(": unable to map registers\n");

sys/dev/pci/mfii.c

762

aprint_error(": unable to map interrupt\n");

sys/dev/pci/mfii.c

820

aprint_error(": unable to allocate sense memory\n");

sys/dev/pci/mfii.c

853

aprint_error(": could not init ccb list\n");

sys/dev/pci/mfii.c

859

aprint_error(": could not initialize firmware\n");

sys/dev/pci/mfii.c

866

aprint_error(": could not retrieve controller information\n");

sys/dev/pci/mfii.c

885

aprint_error(" at %s", intrstr);

sys/dev/pci/mfii.c

886

aprint_error("\n");

sys/dev/pci/mlx_pci.c

280

aprint_error(" at %s", intrstr);

sys/dev/pci/mlx_pci.c

281

aprint_error("\n");

sys/dev/pci/mly.c

365

aprint_error(" at %s", intrstr);

sys/dev/pci/mly.c

366

aprint_error("\n");

sys/dev/pci/mpii.c

521

aprint_error(" at %s", intrstr);

sys/dev/pci/mpii.c

522

aprint_error("\n");

sys/dev/pci/mpt_pci.c

212

aprint_error(" at %s", intrstr);

sys/dev/pci/mpt_pci.c

213

aprint_error("\n");

sys/dev/pci/neo.c

600

aprint_error(" at %s", intrstr);

sys/dev/pci/neo.c

601

aprint_error("\n");

sys/dev/pci/nvme_pci.c

509

aprint_error("%s: unable to register devsw, err %d\n",

sys/dev/pci/oboe.c

222

aprint_error(" at %s", intrstring);

sys/dev/pci/oboe.c

223

aprint_error("\n");

sys/dev/pci/ohci_pci.c

149

aprint_error(" at %s", intrstr);

sys/dev/pci/ohci_pci.c

150

aprint_error("\n");

sys/dev/pci/pccbb.c

932

aprint_error(" at %s\n", intrstr);

sys/dev/pci/pccbb.c

934

aprint_error("\n");

sys/dev/pci/pci.c

622

aprint_error("detect an illegal device! The device use reserved MMC values.\n");

sys/dev/pci/pci_resource.c

1122

aprint_error("PCI: no buses\n");

sys/dev/pci/pci_resource.c

197

aprint_error("PCI: unexpected bus range"

sys/dev/pci/pci_resource.c

221

aprint_error("overlapping %s range: %#" PRIx64 "-%#" PRIx64 ","

sys/dev/pci/pciide_common.c

1118

aprint_error(

sys/dev/pci/pciide_common.c

369

aprint_error(" at %s", intrstr);

sys/dev/pci/pciide_common.c

370

aprint_error("\n");

sys/dev/pci/pciide_common.c

635

aprint_error(dmaerrfmt,

sys/dev/pci/pciide_common.c

644

aprint_error(dmaerrfmt,

sys/dev/pci/pciide_common.c

656

aprint_error(dmaerrfmt,

sys/dev/pci/pciide_common.c

665

aprint_error(dmaerrfmt,

sys/dev/pci/pciide_common.c

678

aprint_error(dmaerrfmt,

sys/dev/pci/pciide_common.c

724

aprint_error(dmaerrfmt,

sys/dev/pci/pciide_common.c

873

aprint_error("%s:%d:%d: bus-master DMA error: status=0x%x\n",

sys/dev/pci/pciide_common.c

880

aprint_error("%s:%d:%d: bus-master DMA error: missing "

sys/dev/pci/pcscp.c

172

aprint_error(": unable to map registers\n");

sys/dev/pci/pcscp.c

243

aprint_error(": can't create DMA maps\n");

sys/dev/pci/pcscp.c

254

aprint_error(": unable to allocate memory for the MDL,"

sys/dev/pci/pcscp.c

261

aprint_error(": unable to map the MDL memory, error = %d\n",

sys/dev/pci/pcscp.c

268

aprint_error(": unable to map_create for the MDL, error = %d\n",

sys/dev/pci/pcscp.c

275

aprint_error(": unable to load for the MDL, error = %d\n",

sys/dev/pci/pcscp.c

282

aprint_error(": couldn't map interrupt\n");

sys/dev/pci/pcscp.c

290

aprint_error(": couldn't establish interrupt");

sys/dev/pci/pcscp.c

292

aprint_error(" at %s", intrstr);

sys/dev/pci/pcscp.c

293

aprint_error("\n");

sys/dev/pci/pdcide.c

514

aprint_error("%s:%d: bogus intr (reg 0x%x)\n",

sys/dev/pci/pdcide.c

557

aprint_error("%s:%d: bogus intr\n",

sys/dev/pci/pdcsata.c

252

aprint_error(" at %s", intrstr);

sys/dev/pci/pdcsata.c

253

aprint_error("\n");

sys/dev/pci/pdcsata.c

360

aprint_error("unknown promise product 0x%x\n",

sys/dev/pci/pdcsata.c

540

aprint_error("%s:%d: bogus intr (reg 0x%x)\n",

sys/dev/pci/pm2fb.c

342

aprint_error("%s: no width property\n", device_xname(self));

sys/dev/pci/pm2fb.c

346

aprint_error("%s: no height property\n", device_xname(self));

sys/dev/pci/pm2fb.c

350

aprint_error("%s: no depth property\n", device_xname(self));

sys/dev/pci/pm2fb.c

368

aprint_error("%s: failed to map registers.\n",

sys/dev/pci/pm2fb.c

70

#define DPRINTF aprint_error

sys/dev/pci/pm3fb.c

244

aprint_error("%s: no width property\n", device_xname(self));

sys/dev/pci/pm3fb.c

248

aprint_error("%s: no height property\n", device_xname(self));

sys/dev/pci/pm3fb.c

252

aprint_error("%s: no depth property\n", device_xname(self));

sys/dev/pci/pm3fb.c

265

aprint_error("%s: failed to map registers.\n",

sys/dev/pci/pvscsi.c

1599

aprint_error(" at %s", intrstr);

sys/dev/pci/pvscsi.c

1600

aprint_error("\n");

sys/dev/pci/pvscsi.c

230

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/pci/pwdog.c

214

aprint_error("%s: unable to init component\n",

sys/dev/pci/pwdog.c

90

aprint_error("\n");

sys/dev/pci/r128fb.c

215

aprint_error("%s: no width property\n", device_xname(self));

sys/dev/pci/r128fb.c

219

aprint_error("%s: no height property\n", device_xname(self));

sys/dev/pci/r128fb.c

229

aprint_error("%s: no depth property\n", device_xname(self));

sys/dev/pci/r128fb.c

233

aprint_error("%s: no linebytes property\n",

sys/dev/pci/r128fb.c

242

aprint_error("%s: failed to map the frame buffer.\n",

sys/dev/pci/r128fb.c

248

aprint_error("%s: failed to map registers.\n",

sys/dev/pci/r128fb.c

721

aprint_error("%s: unsupported depth %d\n",

sys/dev/pci/radeonfb.c

559

aprint_error("%s: unable to map registers!\n", XNAME(sc));

sys/dev/pci/radeonfb.c

566

aprint_error("%s: unable to find ROM!\n", XNAME(sc));

sys/dev/pci/radeonfb.c

576

aprint_error("%s: scratch register test failed!\n", XNAME(sc));

sys/dev/pci/radeonfb.c

610

aprint_error("%s: BIOS initialization failed\n", XNAME(sc));

sys/dev/pci/radeonfb.c

641

aprint_error("%s: Unable to get reference clocks from BIOS\n",

sys/dev/pci/radeonfb.c

647

aprint_error("%s: Unable to identify TMDS PLL settings\n",

sys/dev/pci/radeonfb.c

808

aprint_error("%s: Bad frame buffer configuration\n",

sys/dev/pci/radeonfb.c

818

aprint_error("%s: Unable to map frame buffer\n", XNAME(sc));

sys/dev/pci/radeonfb.c

938

aprint_error("%s: bad depth %d\n", XNAME(sc),

sys/dev/pci/rccide.c

281

aprint_error("%s:%d: bogus intr\n",

sys/dev/pci/satalink.c

777

aprint_error(" at %s", intrstr);

sys/dev/pci/satalink.c

778

aprint_error("\n");

sys/dev/pci/siop_pci_common.c

252

aprint_error("sym: broken match/attach!!\n");

sys/dev/pci/siop_pci_common.c

344

aprint_error(" at %s", intrstr);

sys/dev/pci/siop_pci_common.c

345

aprint_error("\n");

sys/dev/pci/sisfb.c

602

aprint_error("unknown bpp for 0x%x\n", tmp);

sys/dev/pci/siside.c

461

aprint_error("unknown SiS IDE type %d\n",

sys/dev/pci/siside.c

496

aprint_error("unknown SiS IDE type %d\n",

sys/dev/pci/sv.c

423

aprint_error(" at %s", intrstr);

sys/dev/pci/sv.c

424

aprint_error("\n");

sys/dev/pci/svwsata.c

127

aprint_error(": unable to map BA5 register space\n");

sys/dev/pci/svwsata.c

174

aprint_error(" at %s", intrstr);

sys/dev/pci/svwsata.c

175

aprint_error("\n");

sys/dev/pci/tga.c

417

aprint_error(": couldn't map memory space; punt!\n");

sys/dev/pci/tga.c

424

aprint_error(": couldn't map interrupt");

sys/dev/pci/tga.c

431

aprint_error(": couldn't establish interrupt");

sys/dev/pci/tga.c

433

aprint_error("at %s", intrstr);

sys/dev/pci/tga.c

434

aprint_error("\n");

sys/dev/pci/tga.c

494

aprint_error("unknown board configuration\n");

sys/dev/pci/trm.c

443

aprint_error(": unable to map registers (%d)\n", fl);

sys/dev/pci/trm.c

484

aprint_error(" at %s", intrstr);

sys/dev/pci/trm.c

485

aprint_error("\n");

sys/dev/pci/trm.c

533

aprint_error(": unable to allocate SCSI REQUEST BLOCKS, "

sys/dev/pci/trm.c

540

aprint_error(": unable to map SCSI REQUEST BLOCKS, "

sys/dev/pci/trm.c

546

aprint_error(": unable to create SRB DMA maps, "

sys/dev/pci/trm.c

552

aprint_error(": unable to load SRB DMA maps, "

sys/dev/pci/trm.c

597

aprint_error(": unable to create DMA transfer map.\n");

sys/dev/pci/ubsec.c

399

aprint_error(" at %s", intrstr);

sys/dev/pci/ubsec.c

400

aprint_error("\n");

sys/dev/pci/uhci_pci.c

141

aprint_error(" at %s", intrstr);

sys/dev/pci/uhci_pci.c

142

aprint_error("\n");

sys/dev/pci/unichromefb.c

283

aprint_error(": failed to map I/O registers\n");

sys/dev/pci/unichromefb.c

296

aprint_error(": failed to map aperture at 0x%08x/0x%x\n",

sys/dev/pci/unichromefb.c

306

aprint_error(": failed to map MMIO registers\n");

sys/dev/pci/universe_pci.c

141

aprint_error("%s: couldn't map interrupt\n", name);

sys/dev/pci/universe_pci.c

152

aprint_error("%s: couldn't establish interrupt", name);

sys/dev/pci/universe_pci.c

154

aprint_error(" at %s", intrstr);

sys/dev/pci/universe_pci.c

155

aprint_error("\n");

sys/dev/pci/viaide.c

1257

aprint_error(" at %s", intrstr);

sys/dev/pci/viaide.c

1258

aprint_error("\n");

sys/dev/pci/viogpu.c

211

aprint_error("child already attached for %s\n",

sys/dev/pci/vioscsi.c

124

aprint_error(": parent %s already has a child\n",

sys/dev/pci/voodoofb.c

530

aprint_error(" at %s", intrstr);

sys/dev/pci/voodoofb.c

531

aprint_error("\n");

sys/dev/pci/voyager.c

169

aprint_error("%s: failed to map registers.\n",

sys/dev/pci/voyager.c

176

aprint_error("%s: failed to map the frame buffer.\n",

sys/dev/pci/voyager.c

210

aprint_error(" at %s", intrstr);

sys/dev/pci/voyager.c

211

aprint_error("\n");

sys/dev/pci/voyager/pwmclock.c

50

#define DPRINTF aprint_error

sys/dev/pci/voyager/voyagerfb.c

69

#define DPRINTF aprint_error

sys/dev/pci/wcfb.c

185

aprint_error("%s: failed to map registers.\n",

sys/dev/pci/wcfb.c

192

aprint_error("%s: failed to map framebuffer.\n",

sys/dev/pci/xhci_pci.c

240

aprint_error(" at %s", intrstr);

sys/dev/pci/xhci_pci.c

241

aprint_error("\n");

sys/dev/pci/yds.c

781

aprint_error(" at %s", intrstr);

sys/dev/pci/yds.c

782

aprint_error("\n");

sys/dev/pckbport/alps.c

144

aprint_error("%s: sysctl_createv failed (rc = %d)\n",

sys/dev/pckbport/alps.c

367

aprint_error("send nibble error: %d\n", res);

sys/dev/pckbport/alps.c

372

aprint_error("send nibble error: %d\n", res);

sys/dev/pckbport/alps.c

376

aprint_error("send nibble error: %d\n", res);

sys/dev/pckbport/alps.c

417

aprint_error("Failed to set address.\n");

sys/dev/pckbport/alps.c

449

aprint_error("Failed to read a value.\n");

sys/dev/pckbport/alps.c

479

aprint_error("Failed to write a value.\n");

sys/dev/pckbport/alps.c

540

aprint_error("Failed to get resolution.\n");

sys/dev/pckbport/elantech.c

129

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/pckbport/pms.c

237

aprint_error("pmsattach: disable error\n");

sys/dev/pckbport/pms.c

275

aprint_error("pms_enable: command error %d\n", res);

sys/dev/pckbport/pms.c

318

aprint_error("pms_disable: command error\n");

sys/dev/pckbport/synaptics.c

1097

aprint_error("%s: sysctl_createv failed (rc = %d)\n", __func__, rc);

sys/dev/pcmcia/if_malo_pcmcia.c

274

aprint_error(": can't establish interrupt\n");

sys/dev/pcmcia/if_malo_pcmcia.c

279

aprint_error(": can't enable function\n");

sys/dev/podulebus/esp_podule.c

133

aprint_error(": lost manufacturer 0x%04x, product 0x%04x\n",

sys/dev/qbus/if_de.c

327

aprint_error(": unable to ubmemalloc(), error = %d\n",

sys/dev/qbus/if_qe.c

227

aprint_error(": unable to ubmemalloc(), error = %d\n", error);

sys/dev/qbus/if_qe.c

248

aprint_error(

sys/dev/qbus/if_qe.c

262

aprint_error(

sys/dev/qbus/if_qe.c

273

aprint_error(

sys/dev/qbus/if_qe.c

282

aprint_error(

sys/dev/qbus/if_qe.c

289

aprint_error(

sys/dev/qbus/rl.c

235

aprint_error(": Failed to allocate DMA map, error %d\n", error);

sys/dev/qbus/ts.c

270

aprint_error(": failed create DMA map %d\n", error);

sys/dev/qbus/ts.c

282

aprint_error(": failed SET CHARACTERISTICS\n");

sys/dev/raidframe/rf_netbsdkintf.c

4081

aprint_error("%s: devsw_attach failed %d\n", __func__, error);

sys/dev/raidframe/rf_netbsdkintf.c

4088

aprint_error("%s: config_cfdriver_attach failed %d\n",

sys/dev/raidframe/rf_netbsdkintf.c

4097

aprint_error("%s: config_cfattach_attach failed %d\n",

sys/dev/raidframe/rf_netbsdkintf.c

4124

aprint_error("WARNING: unable to register RAIDframe "

sys/dev/raidframe/rf_netbsdkintf.c

4147

aprint_error("%s: cannot detach cfattach\n",__func__);

sys/dev/raidframe/rf_netbsdkintf.c

4154

aprint_error("%s: cannot detach cfdriver\n",__func__);

sys/dev/rasops/rasops.c

313

aprint_error("%s: font table is empty\n", __func__);

sys/dev/rasops/rasops.c

331

aprint_error("%s: couldn't lock font\n", __func__);

sys/dev/rasops/rasops.c

341

aprint_error("%s: bits not aligned on 32-bit boundary\n",

sys/dev/rasops/rasops.c

347

aprint_error("%s: stride not aligned on 32-bit boundary\n",

sys/dev/rasops/rasops.c

392

aprint_error("%s: fontwidth assumptions botched", __func__);

sys/dev/rasops/rasops.c

594

aprint_error("%s: depth not supported\n", __func__);

sys/dev/rasops/rasops.c

60

#define DPRINTF(...) aprint_error(...)

sys/dev/sbus/bpp.c

178

aprint_error(": cannot map registers\n");

sys/dev/sbus/cgtwelve.c

193

aprint_error("%s: couldn't map registers\n",

sys/dev/sbus/cgtwelve.c

203

aprint_error("%s: couldn't map WID\n",

sys/dev/sbus/cgtwelve.c

214

aprint_error("%s: couldn't map colour fb\n",

sys/dev/sbus/cs4231_sbus.c

167

aprint_error("%s @ sbus: cannot map registers\n",

sys/dev/sbus/dbri.c

1073

aprint_error("%s: switching to control mode timed out (%x %x)\n",

sys/dev/sbus/dbri.c

1319

aprint_error("%s: illegal pipe number (%d)\n",

sys/dev/sbus/dbri.c

1363

aprint_error("pipe active (CDP)\n");

sys/dev/sbus/dbri.c

1414

aprint_error("%s: illegal pipe number (%d)\n",

sys/dev/sbus/dbri.c

1456

aprint_error("pipe active (CDP)\n");

sys/dev/sbus/dbri.c

2013

aprint_error("dbri_malloc: load failed\n");

sys/dev/sbus/dbri.c

2015

aprint_error("dbri_malloc: map returned NULL\n");

sys/dev/sbus/dbri.c

2017

aprint_error("dbri_malloc: map failed\n");

sys/dev/sbus/dbri.c

2020

aprint_error("dbri_malloc: malloc() failed\n");

sys/dev/sbus/dbri.c

2023

aprint_error("dbri_malloc: bus_dmamap_create() failed\n");

sys/dev/sbus/dbri.c

305

aprint_error("%s @ sbus: cannot map registers\n",

sys/dev/sbus/dbri.c

871

aprint_error("%s: data_width is %d\n", __func__, data_width);

sys/dev/sbus/dma_sbus.c

147

aprint_error(": cannot map registers\n");

sys/dev/sbus/dma_sbus.c

199

aprint_error(": out of memory\n");

sys/dev/sbus/esp_sbus.c

187

aprint_error(": %d register spaces\n", sa->sa_nreg);

sys/dev/sbus/esp_sbus.c

216

aprint_error(": cannot map dma registers\n");

sys/dev/sbus/esp_sbus.c

266

aprint_error(": cannot map "

sys/dev/sbus/esp_sbus.c

273

aprint_error(": no interrupt property\n");

sys/dev/sbus/esp_sbus.c

295

aprint_error(": no corresponding DMA device\n");

sys/dev/sbus/esp_sbus.c

319

aprint_error(": cannot map registers\n");

sys/dev/sbus/esp_sbus.c

329

aprint_error(": no interrupt property\n");

sys/dev/sbus/esp_sbus.c

375

aprint_error(": cannot map registers\n");

sys/dev/sbus/esp_sbus.c

385

aprint_error(": no interrupt property\n");

sys/dev/sbus/if_gem_sbus.c

103

aprint_error(": unable to get MAC address\n");

sys/dev/sbus/if_le.c

154

aprint_error(": unable to get MAC address\n");

sys/dev/sbus/if_le.c

163

aprint_error(": cannot map registers\n");

sys/dev/sbus/if_le.c

231

aprint_error(": DMA map create error %d\n", error);

sys/dev/sbus/if_le.c

238

aprint_error(": DMA buffer allocation error %d\n",

sys/dev/sbus/if_le.c

248

aprint_error(": DMA buffer map error %d\n", error);

sys/dev/sbus/if_le.c

257

aprint_error(": DMA buffer map load error %d\n", error);

sys/dev/sbus/if_le_lebuffer.c

156

aprint_error(": unable to get MAC address\n");

sys/dev/sbus/if_le_lebuffer.c

165

aprint_error(": cannot map registers\n");

sys/dev/sbus/if_le_ledma.c

344

aprint_error(": cannot map registers\n");

sys/dev/sbus/if_le_ledma.c

354

aprint_error(": DMA map create error %d\n", error);

sys/dev/sbus/if_le_ledma.c

361

aprint_error(": DMA buffer alloc error %d\n",error);

sys/dev/sbus/if_le_ledma.c

368

aprint_error(": DMA buffer map error %d\n", error);

sys/dev/sbus/if_le_ledma.c

375

aprint_error(": DMA buffer map load error %d\n", error);

sys/dev/sbus/if_le_ledma.c

391

aprint_error(": unable to get MAC address\n");

sys/dev/sbus/lebuffer.c

90

aprint_error(": cannot map registers\n");

sys/dev/sbus/magma.c

397

aprint_error("%s @ sbus: cannot map registers\n",

sys/dev/sbus/mgx.c

295

aprint_error("%s: couldn't map VGA registers\n",

sys/dev/sbus/mgx.c

304

aprint_error("%s: couldn't map blitter registers\n",

sys/dev/sbus/p9100.c

1766

aprint_error("%s: bogus colour depth (%d)\n",

sys/dev/sbus/tcx.c

271

aprint_error("\n");

sys/dev/sbus/tcx.c

277

aprint_error("\n");

sys/dev/scsipi/cd.c

1544

aprint_error("read_cd_capacity: extra large block "

sys/dev/sdmmc/sbt.c

178

aprint_error("%s: function not ready\n", DEVNAME(sc));

sys/dev/sdmmc/sbt.c

193

aprint_error("%s: can't establish interrupt\n", DEVNAME(sc));

sys/dev/spi/ssdfb_spi.c

216

aprint_error(": sc_transfer_rect not implemented\n");

sys/dev/splash/splash.c

184

aprint_error("WARNING: %s: not initialized\n", __func__);

sys/dev/splash/splash.c

191

aprint_error("WARNING: couldn't load splash image: %s\n",

sys/dev/splash/splash.c

199

aprint_error(

sys/dev/splash/splash.c

230

aprint_error("WARNING: Splash not supported at %dbpp\n",

sys/dev/sysmon/swsensor.c

339

aprint_error("sysmon_envsys_sensor_attach failed: %d\n", error);

sys/dev/sysmon/swsensor.c

345

aprint_error("sysmon_envsys_register failed: %d\n", error);

sys/dev/sysmon/swwdog.c

115

aprint_error("failed to create swwdog reboot wq");

sys/dev/sysmon/swwdog.c

121

aprint_error("%s: unable to attach cfattach\n",

sys/dev/sysmon/swwdog.c

299

aprint_error("%s: unable to attach cfdriver\n",

sys/dev/sysmon/swwdog.c

305

aprint_error("%s: device attach failed\n", swwdog_cd.cd_name);

sys/dev/sysmon/swwdog.c

323

aprint_error("%s: error detaching cfattach: %d\n",

sys/dev/sysmon/swwdog.c

328

aprint_error("%s: error detaching cfdriver: %d\n",

sys/dev/tc/asc_tc.c

140

aprint_error(": unable to map device\n");

sys/dev/tc/asc_tcds.c

170

aprint_error(": failed to create DMA map, error = %d\n", error);

sys/dev/tc/if_le_ioasic.c

127

aprint_error(": can't allocate DMA area for LANCE\n");

sys/dev/tc/if_le_ioasic.c

132

aprint_error(": can't map DMA area for LANCE\n");

sys/dev/tc/if_le_ioasic.c

140

aprint_error(": can't create DMA map\n");

sys/dev/tc/if_le_ioasic.c

145

aprint_error(": can't load DMA map\n");

sys/dev/usb/ehci.c

129

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/ehci.c

449

aprint_error("%s: ohci or uhci probably not configured\n",

sys/dev/usb/ehci.c

698

aprint_error("%s: run timeout\n", device_xname(sc->sc_dev));

sys/dev/usb/if_atu.c

1383

aprint_error("\n%s: could not get card cfg!\n",

sys/dev/usb/if_aue.c

127

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/if_axe.c

190

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/if_gscan.c

95

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/if_smsc.c

149

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/if_urndis.c

1021

aprint_error("%s: no data interface\n", DEVNAME(un));

sys/dev/usb/if_urndis.c

1031

aprint_error("%s: interface alternate setting %u "

sys/dev/usb/if_urndis.c

1042

aprint_error("%s: no descriptor for bulk "

sys/dev/usb/if_urndis.c

1067

aprint_error("%s: could not find data bulk in\n", DEVNAME(un));

sys/dev/usb/if_urndis.c

1069

aprint_error("%s: could not find data bulk out\n",DEVNAME(un));

sys/dev/usb/if_urndis.c

1080

aprint_error("%s: unable to initialize hardware\n",

sys/dev/usb/if_urndis.c

1087

aprint_error("%s: unable to get hardware address\n",

sys/dev/usb/if_urndis.c

1096

aprint_error("%s: invalid address\n", DEVNAME(un));

sys/dev/usb/if_urndis.c

1108

aprint_error("%s: unable to set data filters\n", DEVNAME(un));

sys/dev/usb/if_urtw.c

1316

aprint_error(": unsupported RF chip %d", data & 0xff);

sys/dev/usb/if_urtw.c

769

aprint_error(": %s failed!\n", __func__);

sys/dev/usb/motg.c

104

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/ohci.c

106

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/u3g.c

320

aprint_error("%s: failed to get interface descriptor\n",

sys/dev/usb/uaudio.c

1002

aprint_error("uaudio_get_cluster: bad data\n");

sys/dev/usb/uaudio.c

1842

aprint_error("uaudio_merge_terminal_list: no memory\n");

sys/dev/usb/uaudio.c

1877

aprint_error("uaudio_io_terminaltype: no memory\n");

sys/dev/usb/uaudio.c

1898

aprint_error("uaudio_io_terminaltype: no memory\n");

sys/dev/usb/uaudio.c

1910

aprint_error("uaudio_io_terminaltype: no memory\n");

sys/dev/usb/uaudio.c

1915

aprint_error("uaudio_io_terminaltype: no memory\n");

sys/dev/usb/uaudio.c

1951

aprint_error("uaudio_io_terminaltype: no memory\n");

sys/dev/usb/uaudio.c

1960

aprint_error("uaudio_io_terminaltype: no memory\n");

sys/dev/usb/uaudio.c

1984

aprint_error("uaudio_io_terminaltype: no memory\n");

sys/dev/usb/uaudio.c

1999

aprint_error("uaudio_io_terminaltype: no memory\n");

sys/dev/usb/uaudio.c

2014

aprint_error("uaudio_io_terminaltype: no memory\n");

sys/dev/usb/uaudio.c

2029

aprint_error("uaudio_io_terminaltype: no memory\n");

sys/dev/usb/uaudio.c

2578

aprint_error("%s: please increase "

sys/dev/usb/uaudio.c

2597

aprint_error("%s: please increase "

sys/dev/usb/uaudio.c

2698

aprint_error("%s: no memory\n", __func__);

sys/dev/usb/uaudio.c

2862

aprint_error("uaudio_identify_ac: unexpected AC header\n");

sys/dev/usb/uaudio.c

2904

aprint_error(

sys/dev/usb/uaudio.c

4225

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/uchcom.c

338

aprint_error("\n%s: failed to get interface: %s\n",

sys/dev/usb/ucom.c

111

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/uep.c

163

aprint_error("\n%s: failed to set configuration, err=%s\n",

sys/dev/usb/uep.c

181

aprint_error("\n%s: failed to get interface, err=%s\n",

sys/dev/usb/ugen.c

106

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/ugensa.c

165

aprint_error("\n%s: failed to set configuration, err=%s\n",

sys/dev/usb/ugensa.c

172

aprint_error("\n%s: failed to get interface, err=%s\n",

sys/dev/usb/uhci.c

115

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/uhmodem.c

360

aprint_error("%s: endpointhalt fail\n", __func__);

sys/dev/usb/uhmodem.c

431

aprint_error("%s: endpointhalt fail\n", __func__);

sys/dev/usb/uhmodem.c

439

aprint_error("%s: a2502init fail\n", __func__);

sys/dev/usb/uhmodem.c

448

aprint_error("%s: e220init fail\n", __func__);

sys/dev/usb/uhub.c

135

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/uipaq.c

186

aprint_error("\n%s: failed to get interface, err=%s\n",

sys/dev/usb/umass.c

237

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/umcs.c

203

aprint_error(": could not set configuration no\n");

sys/dev/usb/umcs.c

212

aprint_error(": could not get interface handle\n");

sys/dev/usb/umodeswitch.c

106

aprint_error("%s: failed to open bulk transfer pipe %d\n",

sys/dev/usb/umodeswitch.c

121

aprint_error("%s: transfer failed\n", __func__);

sys/dev/usb/umodeswitch.c

127

aprint_error("%s: failed to allocate xfer\n", __func__);

sys/dev/usb/umodeswitch.c

78

aprint_error("%s: failed to set config index\n", __func__);

sys/dev/usb/umodeswitch.c

84

aprint_error("%s: failed to get interface\n", __func__);

sys/dev/usb/ums.c

104

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/uplcom.c

310

aprint_error("\n%s: failed to set configuration, err=%s\n",

sys/dev/usb/uplcom.c

368

aprint_error("\n%s: failed to get interface, err=%s\n",

sys/dev/usb/uplcom.c

420

aprint_error("\n%s: failed to get second interface, "

sys/dev/usb/uplcom.c

99

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/usb.c

132

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/usb.c

316

aprint_error(", not supported\n");

sys/dev/usb/usb.c

326

aprint_error("%s: can't register softintr\n",

sys/dev/usb/usb.c

500

aprint_error("%s: root device is not a hub\n",

sys/dev/usb/usb.c

507

aprint_error("%s: root hub problem, error=%s\n",

sys/dev/usb/usbnet.c

144

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/usb/uvisor.c

242

aprint_error("\n%s: failed to set configuration, err=%s\n",

sys/dev/usb/uvisor.c

249

aprint_error("\n%s: failed to get interface, err=%s\n",

sys/dev/usb/vhci.c

1225

aprint_error("%s: unable to register cfattach\n",

sys/dev/usb/xhci.c

107

aprint_error("%s: sysctl_createv failed (err = %d)\n", __func__, err);

sys/dev/virtio/arch/x86/virtio_mmio_cmdline.c

186

aprint_error("Error parsing virtio_mmio parameter: %s\n", arg);

sys/dev/virtio/viocon.c

204

aprint_error(": parent %s already has a child\n",

sys/dev/vnd.c

2159

aprint_error("%s: unable to attach %s devsw, "

sys/dev/vnd.c

2176

aprint_error("%s: unable to register cfattach for \n"

sys/dev/vnd.c

2192

aprint_error("%s: failed to detach %s cfattach, "

sys/dev/vnd.c

2201

aprint_error("%s: failed to detach %s cfdriver, "

sys/dev/vnd.c

254

aprint_error("%s: unable to register cfattach, error = %d\n",

sys/dev/wscons/wsbell.c

230

aprint_error(" attach error=%d", error);

sys/dev/wscons/wskbd.c

646

aprint_error("wskbd_detach: %s didn't detach\n",

sys/dev/wscons/wsmouse.c

284

aprint_error(" attach error=%d", error);

sys/kern/kern_hook.c

506

aprint_error("%s: WARNING: powerhook_establish is deprecated\n", name);

sys/kern/subr_autoconf.c

1429

aprint_error("root device %s not configured\n", rootname);

sys/modules/lua/lua.c

158

aprint_error(": can't create sysctl node\n");

sys/modules/lua/lua.c

878

aprint_error("%s: unable to register devsw\n",

sys/modules/lua/lua.c

894

aprint_error("%s: unable to register cfattach\n",

sys/modules/lua/lua.c

904

aprint_error("%s: unable to register cfdata\n",

sys/modules/luasystm/luasystm.c

133

aprint_error("%s", s);

sys/net/if_ethersubr.c

1082

aprint_error("The multicast bit is set in the MAC address. "

sys/net/if_module.h

34

aprint_error("%s: unable to register cfdriver for" \

sys/net/if_module.h

43

aprint_error("%s: failed to detach %s cfdriver, " \

sys/net/if_tap.c

244

aprint_error("%s: unable to register cfattach\n",

sys/net/if_tap.c

593

aprint_error("%s%d: unable to attach an instance\n",

sys/nfs/nfs_bootstatic.c

170

aprint_error("nfs_boot: set ifaddr, error=%d\n", error);

sys/opencrypto/cryptodev.c

2101

aprint_error("crypto: unable to register devsw,"

sys/rump/dev/lib/libpci/pci_at_mainbus.c

93

aprint_error("pci: I/O space init error %d, I/O space not "

sys/rump/librump/rumpkern/threads.c

180

aprint_error("rump kernel threads not enabled, "

sys/sys/systm.h

251

void aprint_error(const char *, ...) __printflike(1, 2);

sys/ufs/chfs/ebh.c

1609

aprint_error("ebh_open: cant get flash device\n");

sys/ufs/chfs/ebh.c

1615

aprint_error("ebh_open: cant get flash interface\n");

usr.sbin/cpuctl/arch/i386.c

2185

aprint_error("WARNING: CYRIX 486DLC CACHE UNCHANGED.\n");

usr.sbin/cpuctl/arch/i386.c

2188

aprint_error("WARNING: CYRIX 486DLC CACHE ENABLED IN HOLD-FLUSH MODE.\n");

usr.sbin/cpuctl/arch/i386.c

2190

aprint_error("WARNING: CYRIX 486DLC CACHE ENABLED.\n");

usr.sbin/cpuctl/arch/i386.c

677

aprint_error("WARNING: broken TSC disabled\n");

usr.sbin/cpuctl/cpuctl.c

372

__strong_alias(aprint_error,aprint_normal)

usr.sbin/cpuctl/cpuctl.h

33

int aprint_error(const char *, ...) __printflike(1, 2);