root/sys/arch/hp300/dev/dnkbd.c
/*      $NetBSD: dnkbd.c,v 1.16 2025/05/27 18:44:31 tsutsui Exp $       */
/*      $OpenBSD: dnkbd.c,v 1.17 2009/07/23 21:05:56 blambert Exp $     */

/*
 * Copyright (c) 2005, Miodrag Vallat
 * Copyright (c) 1997 Michael Smith.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

/*
 * Driver for the Apollo Domain keyboard and mouse.
 *
 * Random notes on the Apollo keyboard :
 *
 * - Powers up in 'cooked' mode, where the alpha keys generate ascii rather
 *   than make/break codes.  Other keys seem to behave OK though.
 *
 * - Alt L/R keys generate two-byte sequence :
 *             make     break
 *       L    0xfe,2   0xfe,3
 *       R    0xfe,0   0xfe,1
 *
 * - Mouse activity shows up inline in 4-byte packets introduced with 0xdf.
 *   Byte 1 is   1MRL0000    where M, R, L are the mouse buttons, and 0 is
 *                           down, 1 is up.
 *   Byte 2 is 2's complement X movement, +ve to the right.
 *   Byte 3 is 2's complement Y movement, +ve is up.
 *
 * - Keyboard recognises commands sent to it, all preceded by 0xff.  Commands
 *   are echoed once sent completely.
 *
 *   0x00       go to cooked mode.
 *   0x01       go to 'raw' (scancode) mode.
 *   0x12,0x21  status report as <id1>\r<id2>\r<model>\r followed by 0xff
 *              and then the cooked/raw status.
 *   0x21,0x81  beep on
 *   0x21,0x82  beep off
 *
 * Some version examples :
 *
 * <3-@> <1-0> <SD-03687-MS>    Apollo p/n 007121 REV 00 ('old-style' US layout)
 * <3-@> <2-0> <SD-03683-MS>    Apollo p/n 007121 REV 01 ('old-style' US layout)
 * <3-@> <2-0> <SD-03980-MS>    Apollo 3500? keyboard.
 * <3-@> <X-X> <RX-60857-HW>    HP p/n A1630-82001 R2
 *                                  ('new-style' off 425t, US layout),
 *                              also Apollo p/n 014555-002
 *                                  ('new-style' off DN5500, US layout).
 */

#include "opt_wsdisplay_compat.h"

#include "wsdisplay.h"
#include "wsmouse.h"

#include <sys/param.h>
#include <sys/systm.h>
#include <sys/device.h>
#include <sys/ioctl.h>
#include <sys/kernel.h>
#include <sys/callout.h>
#include <sys/conf.h>
#include <sys/bus.h>
#include <sys/cpu.h>

#include <machine/autoconf.h>

#include <dev/cons.h>

#include <dev/wscons/wsconsio.h>
#include <dev/wscons/wskbdvar.h>
#include <dev/wscons/wsksymdef.h>
#include <dev/wscons/wsksymvar.h>
#if NWSDISPLAY > 0
#include <dev/wscons/wsdisplayvar.h>
#endif
#if NWSMOUSE > 0
#include <dev/wscons/wsmousevar.h>
#endif

#include <dev/ic/ns16550reg.h>
#include <dev/ic/comreg.h>

#include <hp300/dev/dnkbdmap.h>
#include <hp300/dev/frodoreg.h>
#include <hp300/dev/frodovar.h>

#include "hilkbd.h"
#include "ioconf.h"

/*
 * Keyboard key codes
 */

#define DNKEY_CAPSLOCK  0x7e
#define DNKEY_REPEAT    0x7f
#define DNKEY_RELEASE   0x80
#define DNKEY_CHANNEL   0xff

/*
 * Channels
 */

#define DNCHANNEL_RESET 0x00
#define DNCHANNEL_KBD   0x01
#define DNCHANNEL_MOUSE 0x02

/*
 * Keyboard modes
 */

#define DNMODE_COOKED   0x00
#define DNMODE_RAW      0x01

/*
 * Keyboard commands
 */

#define DNCMD_PREFIX    0xff
#define DNCMD_COOKED    DNMODE_COOKED
#define DNCMD_RAW       DNMODE_RAW
#define DNCMD_IDENT_1   0x12
#define DNCMD_IDENT_2   0x21

/*
 * Bell commands
 */

#define DNCMD_BELL      0x21
#define DNCMD_BELL_ON   0x81
#define DNCMD_BELL_OFF  0x82

/*
 * Mouse status
 */

#define DNBUTTON_L      0x10
#define DNBUTTON_R      0x20
#define DNBUTTON_M      0x40

struct dnkbd_softc {
        device_t        sc_dev;
        bus_space_tag_t sc_bst;
        bus_space_handle_t sc_bsh;

        int             sc_flags;
#define SF_ENABLED      0x01            /* keyboard enabled */
#define SF_CONSOLE      0x02            /* keyboard is console */
#define SF_POLLING      0x04            /* polling mode */
#define SF_PLUGGED      0x08            /* keyboard has been seen plugged */
#define SF_ATTACHED     0x10            /* subdevices have been attached */
#define SF_MOUSE        0x20            /* mouse enabled */
#define SF_BELL         0x40            /* bell is active */
#define SF_BELL_TMO     0x80            /* bell stop timeout is scheduled */

        u_int           sc_identlen;
#define MAX_IDENTLEN    32
        char            sc_ident[MAX_IDENTLEN];
        kbd_t           sc_layout;

        enum { STATE_KEYBOARD, STATE_MOUSE, STATE_CHANNEL, STATE_ECHO }
                        sc_state, sc_prevstate;
        u_int           sc_echolen;

        uint8_t         sc_mousepkt[3]; /* mouse packet being constructed */
        u_int           sc_mousepos;    /* index in above */

        struct callout  sc_bellstop_tmo;

        device_t        sc_wskbddev;
#if NWSMOUSE > 0
        device_t        sc_wsmousedev;
#endif

#ifdef WSDISPLAY_COMPAT_RAWKBD
        int             sc_rawkbd;
#endif
};

static int      dnkbd_match(device_t, cfdata_t, void *);
static void     dnkbd_attach(device_t, device_t, void *);

CFATTACH_DECL_NEW(dnkbd, sizeof(struct dnkbd_softc),
    dnkbd_match, dnkbd_attach, NULL, NULL);

static void     dnkbd_init(struct dnkbd_softc *, uint16_t, uint16_t);
static int      dnkbd_enable(void *, int);
static void     dnkbd_set_leds(void *, int);
static int      dnkbd_ioctl(void *, u_long, void *, int, struct lwp *);

static const struct wskbd_accessops dnkbd_accessops = {
        .enable   = dnkbd_enable,
        .set_leds = dnkbd_set_leds,
        .ioctl    = dnkbd_ioctl
};

#if NWSMOUSE > 0
static int      dnmouse_enable(void *);
static int      dnmouse_ioctl(void *, u_long, void *, int, struct lwp *);
static void     dnmouse_disable(void *);

static const struct wsmouse_accessops dnmouse_accessops = {
        dnmouse_enable,
        dnmouse_ioctl,
        dnmouse_disable
};
#endif

static void     dnkbd_bell(void *, u_int, u_int, u_int);
static void     dnkbd_cngetc(void *, u_int *, int *);
static void     dnkbd_cnpollc(void *, int);

static const struct wskbd_consops dnkbd_consops = {
        .getc  = dnkbd_cngetc,
        .pollc = dnkbd_cnpollc,
        .bell  = dnkbd_bell
};

static struct wskbd_mapdata dnkbd_keymapdata = {
        .keydesc = dnkbd_keydesctab,
        .layout =
#ifdef DNKBD_LAYOUT
            DNKBD_LAYOUT
#else
            KB_US
#endif
};

typedef enum { EVENT_NONE, EVENT_KEYBOARD, EVENT_MOUSE } dnevent;

#define APCIBRD(x)      (500000 / (x))

static void     dnevent_kbd(struct dnkbd_softc *, int);
static void     dnevent_kbd_internal(struct dnkbd_softc *, int);
static void     dnevent_mouse(struct dnkbd_softc *, uint8_t *);
static void     dnkbd_attach_subdevices(struct dnkbd_softc *);
static void     dnkbd_bellstop(void *);
static void     dnkbd_decode(int, u_int *, int *);
static dnevent  dnkbd_input(struct dnkbd_softc *, int);
static int      dnkbd_intr(void *);
static int      dnkbd_pollin(struct dnkbd_softc *, u_int);
static int      dnkbd_pollout(struct dnkbd_softc *, int);
static int      dnkbd_probe(struct dnkbd_softc *);
static int      dnkbd_send(struct dnkbd_softc *, const uint8_t *, size_t);
static void     dnkbd_break(struct dnkbd_softc *, int);

int
dnkbd_match(device_t parent, cfdata_t cf, void *aux)
{
        struct frodo_attach_args *fa = aux;

        if (strcmp(fa->fa_name, dnkbd_cd.cd_name) != 0)
                return 0;

        if (machineid == HP_382) {
                /* 382 has frodo but no Domain keyboard connector. */
                return 0;
        }

        /* only attach to the first frodo port */
        return fa->fa_offset == FRODO_APCI_OFFSET(0);
}

void
dnkbd_attach(device_t parent, device_t self, void *aux)
{
        struct dnkbd_softc *sc = device_private(self);
        struct frodo_attach_args *fa = aux;

        aprint_normal(": ");

        sc->sc_dev = self;
        sc->sc_bst = fa->fa_bst;
        if (bus_space_map(sc->sc_bst, fa->fa_base + fa->fa_offset,
            FRODO_APCISPACE, 0, &sc->sc_bsh) != 0) {
                aprint_error(": can't map i/o space\n");
                return;
        }

        callout_init(&sc->sc_bellstop_tmo, 0);
        callout_setfunc(&sc->sc_bellstop_tmo, dnkbd_bellstop, sc);

        /* reset the port */
        dnkbd_init(sc, 1200, LCR_8BITS | LCR_PEVEN | LCR_PENAB);

        frodo_intr_establish(parent, dnkbd_intr, sc, fa->fa_line, ISRPRI_TTY);

        /* send break to reset keyboard state */
        dnkbd_break(sc, 1);
        delay(10 * 1000);       /* 10ms for 12 space bits */
        dnkbd_break(sc, 0);
        delay(10 * 1000);

        /* probe for keyboard */
        if (dnkbd_probe(sc) != 0) {
                aprint_normal("no keyboard\n");
                return;
        }

        dnkbd_attach_subdevices(sc);
}

void
dnkbd_init(struct dnkbd_softc *sc, uint16_t rate, uint16_t lctl)
{
        bus_space_tag_t bst;
        bus_space_handle_t bsh;
        u_int divisor;

        bst = sc->sc_bst;
        bsh = sc->sc_bsh;

        divisor = APCIBRD(rate);
        bus_space_write_1(bst, bsh, com_lctl, LCR_DLAB);
        bus_space_write_1(bst, bsh, com_dlbl, divisor & 0xff);
        bus_space_write_1(bst, bsh, com_dlbh, (divisor >> 8) & 0xff);
        bus_space_write_1(bst, bsh, com_lctl, lctl);
        bus_space_write_1(bst, bsh, com_ier, IER_ERXRDY | IER_ETXRDY);
        bus_space_write_1(bst, bsh, com_fifo,
            FIFO_ENABLE | FIFO_RCV_RST | FIFO_XMT_RST | FIFO_TRIGGER_1);
        bus_space_write_1(bst, bsh, com_mcr, MCR_DTR | MCR_RTS);

        delay(100);
        (void)bus_space_read_1(bst, bsh, com_iir);
}

void
dnkbd_attach_subdevices(struct dnkbd_softc *sc)
{
        struct wskbddev_attach_args ka;
#if NWSMOUSE > 0
        struct wsmousedev_attach_args ma;
#endif
#if NHILKBD > 0
        extern int hil_is_console;
#endif

        /*
         * If both hilkbd and dnkbd are configured, prefer the Domain
         * keyboard as console (if we are here, we know the keyboard is
         * plugged), unless the console keyboard has been claimed already
         * (i.e. late hotplug with hil keyboard plugged first).
         */
#if NWSDISPLAY > 0
        if (cn_tab->cn_putc == wsdisplay_cnputc) {
#if NHILKBD > 0
                if (hil_is_console == -1) {
                        ka.console = 1;
                        hil_is_console = 0;
                } else
                        ka.console = 0;
#else
                ka.console = 1;
#endif
        } else
#endif
        {
                ka.console = 0;
        }

        ka.keymap = &dnkbd_keymapdata;
        ka.accessops = &dnkbd_accessops;
        ka.accesscookie = sc;
#ifndef DKKBD_LAYOUT
        dnkbd_keymapdata.layout = sc->sc_layout;
#endif

        if (ka.console) {
                sc->sc_flags = SF_PLUGGED | SF_CONSOLE | SF_ENABLED;
                wskbd_cnattach(&dnkbd_consops, sc, &dnkbd_keymapdata);
        } else {
                sc->sc_flags = SF_PLUGGED;
        }

        sc->sc_wskbddev = config_found(sc->sc_dev, &ka, wskbddevprint,
            CFARGS(.iattr = "wskbddev"));

#if NWSMOUSE > 0
        ma.accessops = &dnmouse_accessops;
        ma.accesscookie = sc;

        sc->sc_wsmousedev = config_found(sc->sc_dev, &ma, wsmousedevprint,
            CFARGS(.iattr = "wsmousedev"));
#endif

        SET(sc->sc_flags, SF_ATTACHED);
}

int
dnkbd_probe(struct dnkbd_softc *sc)
{
        int dat, rc, flags;
        uint8_t cmdbuf[2];
        char rspbuf[MAX_IDENTLEN], *word, *end;
        u_int i;
        int s;

        s = spltty();
        flags = sc->sc_flags;
        SET(sc->sc_flags, SF_POLLING);
        sc->sc_state = STATE_CHANNEL;
        splx(s);

        /*
         * Switch keyboard to raw mode.
         */
        cmdbuf[0] = DNCMD_RAW;
        rc = dnkbd_send(sc, cmdbuf, 1);
        if (rc != 0)
                goto out;

        /*
         * Send the identify command.
         */
        cmdbuf[0] = DNCMD_IDENT_1;
        cmdbuf[1] = DNCMD_IDENT_2;
        rc = dnkbd_send(sc, cmdbuf, 2);
        if (rc != 0)
                goto out;

        for (i = 0; ; i++) {
                dat = dnkbd_pollin(sc, 10000);
                if (dat == -1)
                        break;

                if (i < sizeof(rspbuf))
                        rspbuf[i] = dat;
        }

        if (i > sizeof(rspbuf) || i == 0) {
                aprint_error_dev(sc->sc_dev,
                    "unexpected identify string length %d\n", i);
                rc = ENXIO;
                goto out;
        }

        /*
         * Make sure the identification string is NULL terminated
         * (overwriting the keyboard mode byte if necessary).
         */
        i--;
        if (rspbuf[i] != 0)
                rspbuf[i] = 0;

        /*
         * Now display the identification strings, if they changed.
         */
        if (i != sc->sc_identlen || memcmp(rspbuf, sc->sc_ident, i) != 0) {
                sc->sc_layout = KB_US;
                sc->sc_identlen = i;
                memcpy(sc->sc_ident, rspbuf, i);

                if (cold == 0)
                        aprint_normal_dev(sc->sc_dev, "");
                aprint_normal("model ");
                word = rspbuf;
                for (i = 0; i < 3; i++) {
                        end = strchr(word, '\r');
                        if (end == NULL)
                                break;
                        *end++ = '\0';
                        aprint_normal("<%s> ", word);
                        /*
                         * Parse the layout code if applicable
                         */
                        if (i == 1 && *word++ == '3') {
                                if (*word == '-')
                                        word++;
                                switch (*word) {
#if 0
                                default:
                                case ' ':
                                        sc->sc_layout = KB_US;
                                        break;
#endif
                                case 'a':
                                        sc->sc_layout = KB_DE;
                                        break;
                                case 'b':
                                        sc->sc_layout = KB_FR;
                                        break;
                                case 'c':
                                        sc->sc_layout = KB_DK;
                                        break;
                                case 'd':
                                        sc->sc_layout = KB_SV;
                                        break;
                                case 'e':
                                        sc->sc_layout = KB_UK;
                                        break;
                                case 'f':
                                        sc->sc_layout = KB_JP;
                                        break;
                                case 'g':
                                        sc->sc_layout = KB_SG;
                                        break;
                                }
                        }
                        word = end;
                }
                aprint_normal("\n");
        }

        /*
         * Ready to work, the default channel is the keyboard.
         */
        sc->sc_state = STATE_KEYBOARD;

out:
        s = spltty();
        sc->sc_flags = flags;
        splx(s);

        return rc;
}

/*
 * State machine.
 *
 * In raw mode, the keyboard may feed us the following sequences:
 * - on the keyboard channel:
 *   + a raw key code, in the range 0x01-0x7e, or'ed with 0x80 if key release.
 *   + the key repeat sequence 0x7f.
 * - on the mouse channel:
 *   + a 3 byte mouse sequence (buttons state, dx move, dy move).
 * - at any time:
 *   + a 2 byte channel sequence (0xff followed by the channel number) telling
 *     us which device the following input will come from.
 *   + if we get 0xff but an invalid channel number, this is a command echo.
 *     Currently we only handle this for bell commands, which size are known.
 *     Other commands are issued through dnkbd_send() which ``eats'' the echo.
 *
 * Older keyboards reset the channel to the keyboard (by sending ff 01) after
 * every mouse packet.
 */

dnevent
dnkbd_input(struct dnkbd_softc *sc, int dat)
{
        dnevent event = EVENT_NONE;

        switch (sc->sc_state) {
        case STATE_KEYBOARD:
                switch (dat) {
                case DNKEY_REPEAT:
                        /*
                         * We ignore event repeats, as wskbd does its own
                         * soft repeat processing.
                         */
                        break;
                case DNKEY_CHANNEL:
                        sc->sc_prevstate = sc->sc_state;
                        sc->sc_state = STATE_CHANNEL;
                        break;
                default:
                        event = EVENT_KEYBOARD;
                        break;
                }
                break;

        case STATE_MOUSE:
                if (dat == DNKEY_CHANNEL && sc->sc_mousepos == 0) {
                        sc->sc_prevstate = sc->sc_state;
                        sc->sc_state = STATE_CHANNEL;
                } else {
                        sc->sc_mousepkt[sc->sc_mousepos++] = dat;
                        if (sc->sc_mousepos == sizeof(sc->sc_mousepkt)) {
                                sc->sc_mousepos = 0;
                                event = EVENT_MOUSE;
                        }
                }
                break;

        case STATE_CHANNEL:
                switch (dat) {
                case DNKEY_CHANNEL:
                        /*
                         * During hotplug, we might get spurious 0xff bytes.
                         * Ignore them.
                         */
                        break;
                case DNCHANNEL_RESET:
                        /*
                         * Identify the keyboard again. This will switch it to
                         * raw mode again. If this fails, we'll consider the
                         * keyboard as unplugged (to ignore further events until
                         * a successful reset).
                         */
                        if (dnkbd_probe(sc) == 0) {
                                /*
                                 * We need to attach wskbd and wsmouse children
                                 * if this is a live first plug.
                                 */
                                if (!ISSET(sc->sc_flags, SF_ATTACHED))
                                        dnkbd_attach_subdevices(sc);
                                SET(sc->sc_flags, SF_PLUGGED);
                        } else {
                                CLR(sc->sc_flags, SF_PLUGGED);
                        }

                        sc->sc_state = STATE_KEYBOARD;
                        break;
                case DNCHANNEL_KBD:
                        sc->sc_state = STATE_KEYBOARD;
                        break;
                case DNCHANNEL_MOUSE:
                        sc->sc_state = STATE_MOUSE;
                        sc->sc_mousepos = 0;    /* just in case */
                        break;
                case DNCMD_BELL:
                        /*
                         * We are getting a bell command echoed to us.
                         * Ignore it.
                         */
                        sc->sc_state = STATE_ECHO;
                        sc->sc_echolen = 1;     /* one byte to follow */
                        break;
                default:
                        printf("%s: unexpected channel byte %02x\n",
                            device_xname(sc->sc_dev), dat);
                        break;
                }
                break;

        case STATE_ECHO:
                if (--sc->sc_echolen == 0) {
                        /* get back to the state we were in before the echo */
                        sc->sc_state = sc->sc_prevstate;
                }
                break;
        }

        return event;
}

/*
 * Event breakers.
 */

void
dnkbd_decode(int keycode, u_int *type, int *key)
{
        *type = (keycode & DNKEY_RELEASE) ?
            WSCONS_EVENT_KEY_UP : WSCONS_EVENT_KEY_DOWN;
        *key = (keycode & ~DNKEY_RELEASE);
}

void
dnevent_kbd(struct dnkbd_softc *sc, int dat)
{
        if (!ISSET(sc->sc_flags, SF_PLUGGED))
                return;

        if (sc->sc_wskbddev == NULL)
                return;

        if (!ISSET(sc->sc_flags, SF_ENABLED))
                return;

        /*
         * Even in raw mode, the caps lock key is treated specially:
         * first key press causes event 0x7e, release causes no event;
         * then a new key press causes nothing, and release causes
         * event 0xfe. Moreover, while kept down, it does not produce
         * repeat events.
         *
         * So the best we can do is fake the missed events, but this
         * will not allow the capslock key to be remapped as a control
         * key since it will not be possible to chord it with anything.
         */
        dnevent_kbd_internal(sc, dat);
        if ((dat & ~DNKEY_RELEASE) == DNKEY_CAPSLOCK)
                dnevent_kbd_internal(sc, dat ^ DNKEY_RELEASE);
}

void
dnevent_kbd_internal(struct dnkbd_softc *sc, int dat)
{
        u_int type;
        int key;
        int s;

        dnkbd_decode(dat, &type, &key);

#ifdef WSDISPLAY_COMPAT_RAWKBD
        if (sc->sc_rawkbd) {
                u_char cbuf[2];
                int c, j;

                j = 0;
                c = dnkbd_raw[key];
                if (c != 0) {
                        /* fake extended scancode if necessary */
                        if (c & 0x80)
                                cbuf[j++] = 0xe0;
                        cbuf[j] = c & 0x7f;
                        if (type == WSCONS_EVENT_KEY_UP)
                                cbuf[j] |= 0x80;
                        j++;
                }

                if (j != 0) {
                        s = spltty();
                        wskbd_rawinput(sc->sc_wskbddev, cbuf, j);
                        splx(s);
                }
        } else
#endif
        {
                s = spltty();
                wskbd_input(sc->sc_wskbddev, type, key);
                splx(s);
        }
}

#if NWSMOUSE > 0
void
dnevent_mouse(struct dnkbd_softc *sc, uint8_t *dat)
{
        if (!ISSET(sc->sc_flags, SF_PLUGGED))
                return;

        if (sc->sc_wsmousedev == NULL)
                return;

        if (!ISSET(sc->sc_flags, SF_MOUSE))
                return;

        /*
         * First byte is button status. It has the 0x80 bit always set, and
         * the next 3 bits are *cleared* when the mouse buttons are pressed.
         */
#ifdef DEBUG
        if (!ISSET(*dat, 0x80)) {
                printf("%s: incorrect mouse packet %02x %02x %02x\n",
                    device_xname(sc->sc_dev), dat[0], dat[1], dat[2]);
                return;
        }
#endif

        wsmouse_input(sc->sc_wsmousedev,
            (~dat[0] & (DNBUTTON_L | DNBUTTON_M | DNBUTTON_R)) >> 4,
            (int8_t)dat[1], (int8_t)dat[2], 0, 0, WSMOUSE_INPUT_DELTA);
}
#endif

/*
 * Low-level communication routines.
 */

int
dnkbd_pollin(struct dnkbd_softc *sc, u_int tries)
{
        bus_space_tag_t bst;
        bus_space_handle_t bsh;
        u_int cnt;

        bst = sc->sc_bst;
        bsh = sc->sc_bsh;

        for (cnt = tries; cnt != 0; cnt--) {
                if (bus_space_read_1(bst, bsh, com_lsr) & LSR_RXRDY)
                        break;
                DELAY(10);
        }

        if (cnt == 0)
                return -1;
        else
                return (int)bus_space_read_1(bst, bsh, com_data);
}

int
dnkbd_pollout(struct dnkbd_softc *sc, int dat)
{
        bus_space_tag_t bst;
        bus_space_handle_t bsh;
        u_int cnt;

        bst = sc->sc_bst;
        bsh = sc->sc_bsh;

        for (cnt = 10000; cnt != 0; cnt--) {
                if (bus_space_read_1(bst, bsh, com_lsr) & LSR_TXRDY)
                        break;
                DELAY(10);
        }
        if (cnt == 0)
                return EBUSY;
        else {
                bus_space_write_1(bst, bsh, com_data, dat);
                return 0;
        }
}

int
dnkbd_send(struct dnkbd_softc *sc, const uint8_t *cmdbuf, size_t cmdlen)
{
        int cnt, rc, dat;
        u_int cmdpos;

        /* drain rxfifo */
        for (cnt = 10; cnt != 0; cnt--) {
                if (dnkbd_pollin(sc, 10) == -1)
                        break;
        }
        if (cnt == 0)
                return EBUSY;

        /* send command escape */
        if ((rc = dnkbd_pollout(sc, DNCMD_PREFIX)) != 0)
                return rc;

        /* send command buffer */
        for (cmdpos = 0; cmdpos < cmdlen; cmdpos++) {
                if ((rc = dnkbd_pollout(sc, cmdbuf[cmdpos])) != 0)
                        return rc;
        }

        /* wait for command echo */
        do {
                dat = dnkbd_pollin(sc, 10000);
                if (dat == -1)
                        return EIO;
        } while (dat != DNCMD_PREFIX);

        for (cmdpos = 0; cmdpos < cmdlen; cmdpos++) {
                dat = dnkbd_pollin(sc, 10000);
                if (dat != cmdbuf[cmdpos])
                        return EIO;
        }

        return 0;
}

void
dnkbd_break(struct dnkbd_softc *sc, int onoff)
{
        bus_space_tag_t bst;
        bus_space_handle_t bsh;
        uint8_t reg;

        bst = sc->sc_bst;
        bsh = sc->sc_bsh;

        reg = bus_space_read_1(bst, bsh, com_lctl);
        if (onoff)
                reg |= LCR_SBREAK;
        else
                reg &= ~LCR_SBREAK;
        bus_space_write_1(bst, bsh, com_lctl, reg);
}

int
dnkbd_intr(void *v)
{
        struct dnkbd_softc *sc = v;
        bus_space_tag_t bst;
        bus_space_handle_t bsh;
        uint8_t iir, lsr, c;
        int claimed = 0;

        bst = sc->sc_bst;
        bsh = sc->sc_bsh;

        for (;;) {
                iir = bus_space_read_1(bst, bsh, com_iir);

                switch (iir & IIR_IMASK) {
                case IIR_RLS:
                        /*
                         * Line status change. This should never happen,
                         * so silently ack the interrupt.
                         */
                        c = bus_space_read_1(bst, bsh, com_lsr);
                        break;

                case IIR_RXRDY:
                case IIR_RXTOUT:
                        /*
                         * Data available. We process it byte by byte,
                         * unless we are doing polling work...
                         */
                        if (ISSET(sc->sc_flags, SF_POLLING)) {
                                return 1;
                        }

                        for (;;) {
                                c = bus_space_read_1(bst, bsh, com_data);
                                switch (dnkbd_input(sc, c)) {
                                case EVENT_KEYBOARD:
                                        dnevent_kbd(sc, c);
                                        break;
#if NWSMOUSE > 0
                                case EVENT_MOUSE:
                                        dnevent_mouse(sc, sc->sc_mousepkt);
                                        break;
#endif
                                default:        /* appease gcc */
                                        break;
                                }
                                lsr = bus_space_read_1(bst, bsh, com_lsr) &
                                    LSR_RCV_MASK;
                                if (lsr == 0)
                                        break;
                                else if (lsr != LSR_RXRDY) {
                                        /* ignore error */
                                        break;
                                }
                        }
                        break;

                case IIR_TXRDY:
                        /*
                         * Transmit available. Since we do all our commands
                         * in polling mode, we do not need to do anything here.
                         */
                        break;

                default:
                        if (iir & IIR_NOPEND)
                                return claimed;
                        /* FALLTHROUGH */

                case IIR_MLSC:
                        /*
                         * Modem status change. This should never happen,
                         * so silently ack the interrupt.
                         */
                        c = bus_space_read_1(bst, bsh, com_msr);
                        break;
                }

                claimed = 1;
        }
}

/*
 * Wskbd callbacks
 */

int
dnkbd_enable(void *v, int on)
{
        struct dnkbd_softc *sc = v;

        if (on) {
                if (ISSET(sc->sc_flags, SF_ENABLED))
                        return EBUSY;
                SET(sc->sc_flags, SF_ENABLED);
        } else {
                if (ISSET(sc->sc_flags, SF_CONSOLE))
                        return EBUSY;
                CLR(sc->sc_flags, SF_ENABLED);
        }

        return 0;
}

void
dnkbd_set_leds(void *v, int leds)
{
        /*
         * Not supported. There is only one LED on this keyboard, and
         * is hardware tied to the caps lock key.
         */
}

int
dnkbd_ioctl(void *v, u_long cmd, void *data, int flag, struct lwp *l)
{
#ifdef WSDISPLAY_COMPAT_RAWKBD
        struct dnkbd_softc *sc = v;
#endif

#define WSKBD_TYPE_UNKNOWN      0

        switch (cmd) {
        case WSKBDIO_GTYPE:
                *(int *)data = WSKBD_TYPE_UNKNOWN;      /* XXX */
                return 0;
        case WSKBDIO_SETLEDS:
                return ENXIO;
        case WSKBDIO_GETLEDS:
                *(int *)data = 0;
                return 0;
        case WSKBDIO_COMPLEXBELL:
#define d       ((struct wskbd_bell_data *)data)
                dnkbd_bell(v, d->period, d->pitch, d->volume);
#undef d
                return 0;
#ifdef WSDISPLAY_COMPAT_RAWKBD
        case WSKBDIO_SETMODE:
                sc->sc_rawkbd = *(int *)data == WSKBD_RAW;
                return 0;
#endif
        }

        return EPASSTHROUGH;
}

#if NWSMOUSE > 0
/*
 * Wsmouse callbacks
 */

int
dnmouse_enable(void *v)
{
        struct dnkbd_softc *sc = v;

        if (ISSET(sc->sc_flags, SF_MOUSE))
                return EBUSY;
        SET(sc->sc_flags, SF_MOUSE);

        return 0;
}

int
dnmouse_ioctl(void *v, u_long cmd, void *data, int flag, struct lwp *l)
{
#if 0
        struct dnkbd_softc *sc = v;
#endif

#define WSMOUSE_TYPE_UNKNOWN    0

        switch (cmd) {
        case WSMOUSEIO_GTYPE:
                *(int *)data = WSMOUSE_TYPE_UNKNOWN;    /* XXX */
                return 0;
        }

        return -1;
}

void
dnmouse_disable(void *v)
{
        struct dnkbd_softc *sc = v;

        CLR(sc->sc_flags, SF_MOUSE);
}
#endif

/*
 * Console support
 */

void
dnkbd_cngetc(void *v, u_int *type, int *data)
{
        static int lastdat = 0;
        struct dnkbd_softc *sc = v;
        int s;
        int dat;

        /* Take care of caps lock */
        if ((lastdat & ~DNKEY_RELEASE) == DNKEY_CAPSLOCK) {
                dat = lastdat ^ DNKEY_RELEASE;
                lastdat = 0;
        } else {
                for (;;) {
                        s = splhigh();
                        dat = dnkbd_pollin(sc, 10000);
                        if (dat != -1) {
                                if (dnkbd_input(sc, dat) == EVENT_KEYBOARD) {
                                        splx(s);
                                        break;
                                }
                        }
                        splx(s);
                }
                lastdat = dat;
        }

        dnkbd_decode(dat, type, data);
}

void
dnkbd_cnpollc(void *v, int on)
{
        struct dnkbd_softc *sc = v;

        if (on)
                SET(sc->sc_flags, SF_POLLING);
        else
                CLR(sc->sc_flags, SF_POLLING);
}

/*
 * Bell routines.
 */
void
dnkbd_bell(void *v, u_int period, u_int pitch, u_int volume)
{
        struct dnkbd_softc *sc = v;
        int s;

        s = spltty();

        if (pitch == 0 || period == 0 || volume == 0) {
                if (ISSET(sc->sc_flags, SF_BELL_TMO)) {
                        callout_stop(&sc->sc_bellstop_tmo);
                        dnkbd_bellstop(v);
                }
        } else {

                if (!ISSET(sc->sc_flags, SF_BELL)) {
                        dnkbd_pollout(sc, DNCMD_PREFIX);
                        dnkbd_pollout(sc, DNCMD_BELL);
                        dnkbd_pollout(sc, DNCMD_BELL_ON);
                        SET(sc->sc_flags, SF_BELL);
                }

                if (ISSET(sc->sc_flags, SF_BELL_TMO))
                        callout_stop(&sc->sc_bellstop_tmo);
                callout_schedule(&sc->sc_bellstop_tmo, period);
                SET(sc->sc_flags, SF_BELL_TMO);
        }

        splx(s);
}

void
dnkbd_bellstop(void *v)
{
        struct dnkbd_softc *sc = v;
        int s;

        s = spltty();

        dnkbd_pollout(sc, DNCMD_PREFIX);
        dnkbd_pollout(sc, DNCMD_BELL);
        dnkbd_pollout(sc, DNCMD_BELL_OFF);
        CLR(sc->sc_flags, SF_BELL);
        CLR(sc->sc_flags, SF_BELL_TMO);

        splx(s);
}