arch/alpha/kernel/perf_event.c

823

pr_warn("PMI: silly index %ld\n", la_ptr);

arch/alpha/kernel/perf_event.c

846

pr_warn("PMI: No event at index %d!\n", idx);

arch/arc/include/asm/bug.h

23

pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \

arch/arc/kernel/arc_hostlink.c

25

pr_warn("Hostlink buffer mmap ERROR\n");

arch/arc/kernel/setup.c

368

pr_warn(" ! Enable %s for working apps\n", opt_name);

arch/arc/kernel/setup.c

462

pr_warn(IGNORE_ARGS "invalid uboot tag: '%08x'\n", uboot_tag);

arch/arc/kernel/setup.c

467

pr_warn(IGNORE_ARGS "non zero uboot magic\n");

arch/arc/kernel/setup.c

473

pr_warn(IGNORE_ARGS "invalid uboot arg: '%px'\n", uboot_arg);

arch/arc/kernel/smp.c

66

pr_warn("Failed to get possible-cpus from dtb, pretending all %u cpus exist\n",

arch/arc/kernel/unaligned.c

217

pr_warn("%s(%d): unaligned access to/from 0x%lx by PC: 0x%lx\n",

arch/arc/kernel/unwind.c

265

pr_warn(".eh_frame_hdr for '%s' present but unusable\n",

arch/arm/common/bL_switcher.c

589

pr_warn("big.LITTLE switcher initialization failed\n");

arch/arm/common/mcpm_entry.c

317

pr_warn("%s: cpu %u, cluster %u failed to power down (%d)\n",

arch/arm/kernel/atags_compat.c

108

pr_warn("Warning: bad NeTTrom parameters detected, using defaults\n");

arch/arm/kernel/atags_compat.c

97

pr_warn("Warning: bad configuration page, trying to continue\n");

arch/arm/kernel/atags_parse.c

128

pr_warn("Ignoring tag cmdline (using the default kernel command line)\n");

arch/arm/kernel/atags_parse.c

165

pr_warn("Ignoring unrecognised tag 0x%08x\n",

arch/arm/kernel/cpuidle.c

103

pr_warn("cpuidle_ops '%s': no init or suspend callback\n",

arch/arm/kernel/cpuidle.c

97

pr_warn("%pOF: unsupported enable-method property: %s\n",

arch/arm/kernel/devtree.c

151

pr_warn("DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map\n");

arch/arm/kernel/efi.c

102

pr_warn(FW_BUG "EFI stub was entered with MMU and Dcache disabled, please fix your firmware!\n");

arch/arm/kernel/efi.c

104

pr_warn(FW_BUG "ExitBootServices() returned with MMU and Dcache disabled, please fix your firmware!\n");

arch/arm/kernel/efi.c

97

pr_warn("Unable to map CPU entry state table.\n");

arch/arm/kernel/hw_breakpoint.c

1005

pr_warn("Debug register access (0x%x) caused undefined instruction on CPU %d\n",

arch/arm/kernel/hw_breakpoint.c

105

pr_warn("attempt to read from unknown breakpoint register %d\n",

arch/arm/kernel/hw_breakpoint.c

120

pr_warn("attempt to write to unknown breakpoint register %d\n",

arch/arm/kernel/hw_breakpoint.c

287

pr_warn("unknown slot type: %d\n", type);

arch/arm/kernel/hw_breakpoint.c

360

pr_warn("Can't find any breakpoint slot\n");

arch/arm/kernel/hw_breakpoint.c

412

pr_warn("Can't find any breakpoint slot\n");

arch/arm/kernel/machine_kexec.c

125

pr_warn("Non-crashing CPUs did not react to IPI\n");

arch/arm/kernel/psci_smp.c

109

pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n",

arch/arm/kernel/setup.c

1074

pr_warn("CPU: WARNING: CPU(s) started in wrong/inconsistent modes (primary CPU mode 0x%x)\n",

arch/arm/kernel/setup.c

1076

pr_warn("CPU: This may indicate a broken bootloader or firmware.\n");

arch/arm/kernel/setup.c

677

pr_warn("Large number of MPIDR hash buckets detected\n");

arch/arm/kernel/smp.c

364

pr_warn("CPU%u: smp_ops.cpu_die() returned, trying to resuscitate\n",

arch/arm/kernel/smp.c

769

pr_warn("SMP: failed to stop secondary CPUs\n");

arch/arm/kernel/unwind.c

148

pr_warn("unwind: Unknown symbol address %08lx\n", addr);

arch/arm/kernel/unwind.c

216

pr_warn("unwind: Corrupt unwind table\n");

arch/arm/kernel/unwind.c

354

pr_warn("unwind: 'Refuse to unwind' instruction %04lx\n",

arch/arm/kernel/unwind.c

378

pr_warn("unwind: Spare encoding %04lx\n",

arch/arm/kernel/unwind.c

391

pr_warn("unwind: Unhandled instruction %02lx\n", insn);

arch/arm/kernel/unwind.c

432

pr_warn("unwind: Index not found %08lx\n", frame->pc);

arch/arm/kernel/unwind.c

465

pr_warn("unwind: Unsupported personality routine %08lx in the index at %p\n",

arch/arm/kernel/unwind.c

478

pr_warn("unwind: Unsupported personality routine %08lx at %p\n",

arch/arm/kernel/xscale-cp0.c

164

pr_warn("CAUTION: XScale iWMMXt coprocessor detected, but kernel support is missing.\n");

arch/arm/mach-at91/pm.c

1000

pr_warn("%s: sram pool unavailable!\n", __func__);

arch/arm/mach-at91/pm.c

1006

pr_warn("%s: unable to alloc sram!\n", __func__);

arch/arm/mach-at91/pm.c

1014

pr_warn("SRAM: Could not map\n");

arch/arm/mach-at91/pm.c

1084

pr_warn("%s: failed to find securam device!\n", __func__);

arch/arm/mach-at91/pm.c

1090

pr_warn("%s: securam pool unavailable!\n", __func__);

arch/arm/mach-at91/pm.c

1096

pr_warn("%s: unable to alloc securam!\n", __func__);

arch/arm/mach-at91/pm.c

1133

pr_warn("AT91: Secure PM: %s mode not supported !\n",

arch/arm/mach-at91/pm.c

1138

pr_warn("AT91: Secure PM: failed to get default mode\n");

arch/arm/mach-at91/pm.c

1262

pr_warn("%s: failed to find shdwc!\n", __func__);

arch/arm/mach-at91/pm.c

1274

pr_warn("%s: failed to find sfrbu!\n", __func__);

arch/arm/mach-at91/pm.c

1426

pr_warn("AT91: PM: %s mode not supported! Using %s.\n",

arch/arm/mach-at91/pm.c

1438

pr_warn("AT91: PM: %s mode not supported! Using %s.\n",

arch/arm/mach-at91/pm.c

1629

pr_warn("AT91: Secure PM: ignoring standby mode\n");

arch/arm/mach-at91/pm.c

950

pr_warn("ramc no standby function available\n");

arch/arm/mach-at91/pm.c

994

pr_warn("%s: failed to find sram device!\n", __func__);

arch/arm/mach-bcm/bcm63xx_smp.c

158

pr_warn("SMP: Cortex-A9 SCU setup failed\n");

arch/arm/mach-bcm/bcm63xx_smp.c

65

pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",

arch/arm/mach-bcm/bcm63xx_smp.c

81

pr_warn("SMP: secondary CPUs lack VFP unit, disabling VFP\n");

arch/arm/mach-bcm/platsmp-brcmstb.c

207

pr_warn("SMP: refusing to power off CPU0\n");

arch/arm/mach-bcm/platsmp.c

111

pr_warn("unable to ioremap SKU-ROM LUT register for cpu %u\n", cpu);

arch/arm/mach-bcm/platsmp.c

135

pr_warn("failed to enable A9 SCU - disabling SMP\n");

arch/arm/mach-davinci/devices-da8xx.c

65

pr_warn("%s: Unable to map DDR2 controller", __func__);

arch/arm/mach-davinci/mux.c

86

pr_warn("initialized %s\n", cfg->name);

arch/arm/mach-davinci/mux.c

92

pr_warn("Setting register %s\n", cfg->name);

arch/arm/mach-davinci/mux.c

93

pr_warn(" %s (0x%08x) = 0x%08x -> 0x%08x\n",

arch/arm/mach-davinci/pdata-quirks.c

112

pr_warn("%s: VPIF capture setup failed: %d\n",

arch/arm/mach-davinci/pdata-quirks.c

187

pr_warn("%s: VPIF display setup failed: %d\n",

arch/arm/mach-exynos/platsmp.c

439

pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);

arch/arm/mach-exynos/suspend.c

589

pr_warn("Failed to resume regulators from suspend (%d)\n", ret);

arch/arm/mach-exynos/suspend.c

685

pr_warn("Outdated DT detected, suspend/resume will NOT work\n");

arch/arm/mach-imx/gpc.c

278

pr_warn("Outdated DT detected, suspend/resume will NOT work\n");

arch/arm/mach-imx/mach-imx6q.c

103

pr_warn("%s: failed to get ptp clock\n", __func__);

arch/arm/mach-imx/mach-imx6q.c

109

pr_warn("%s: failed to get enet clock\n", __func__);

arch/arm/mach-imx/mach-imx6q.c

165

pr_warn("failed to find fsl,imx6q-iomuxc-gpr regmap\n");

arch/arm/mach-imx/mach-imx6q.c

89

pr_warn("%s: failed to find fec node\n", __func__);

arch/arm/mach-imx/mach-imx7ulp.c

27

pr_warn("failed to find fsl,imx7ulp-sim regmap!\n");

arch/arm/mach-imx/mach-imx7ulp.c

32

pr_warn("failed to read sim regmap!\n");

arch/arm/mach-imx/mmdc.c

528

pr_warn("MMDC Perf PMU failed (%d), disabled\n", ret);

arch/arm/mach-imx/pm-imx5.c

284

pr_warn("%s: failed to find ocram node!\n", __func__);

arch/arm/mach-imx/pm-imx5.c

290

pr_warn("%s: failed to find ocram device!\n", __func__);

arch/arm/mach-imx/pm-imx5.c

297

pr_warn("%s: ocram pool unavailable!\n", __func__);

arch/arm/mach-imx/pm-imx5.c

304

pr_warn("%s: unable to alloc ocram!\n", __func__);

arch/arm/mach-imx/pm-imx5.c

399

pr_warn("%s: cpuidle init failed %d\n", __func__, ret);

arch/arm/mach-imx/pm-imx5.c

403

pr_warn("%s: No DDR LPM support with suspend %d!\n",

arch/arm/mach-imx/pm-imx6.c

478

pr_warn("%s: invalid argument!\n", __func__);

arch/arm/mach-imx/pm-imx6.c

484

pr_warn("%s: failed to find ocram node!\n", __func__);

arch/arm/mach-imx/pm-imx6.c

490

pr_warn("%s: failed to find ocram device!\n", __func__);

arch/arm/mach-imx/pm-imx6.c

497

pr_warn("%s: ocram pool unavailable!\n", __func__);

arch/arm/mach-imx/pm-imx6.c

504

pr_warn("%s: unable to alloc ocram!\n", __func__);

arch/arm/mach-imx/pm-imx6.c

528

pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret);

arch/arm/mach-imx/pm-imx6.c

534

pr_warn("%s: failed to get src base %d!\n", __func__, ret);

arch/arm/mach-imx/pm-imx6.c

540

pr_warn("%s: failed to get iomuxc base %d!\n", __func__, ret);

arch/arm/mach-imx/pm-imx6.c

546

pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);

arch/arm/mach-imx/pm-imx6.c

553

pr_warn("%s: failed to get pl310-cache base %d!\n",

arch/arm/mach-imx/pm-imx6.c

607

pr_warn("%s: No DDR LPM support with suspend %d!\n",

arch/arm/mach-imx/pm-imx6.c

638

pr_warn("%s: platform power off already claimed!\n", __func__);

arch/arm/mach-imx/system.c

72

pr_warn("%s: failed to get wdog clock\n", __func__);

arch/arm/mach-mstar/mstarv7.c

122

pr_warn("Failed to install memory barrier, DMA will be broken!\n");

arch/arm/mach-mvebu/board-v7.c

90

pr_warn("Too little memory to reserve for DDR training\n");

arch/arm/mach-mvebu/coherency.c

246

pr_warn("Can't make current CPU cache coherent.\n");

arch/arm/mach-mvebu/coherency.c

247

pr_warn("Coherency fabric is not initialized\n");

arch/arm/mach-mvebu/cpu-reset.c

86

pr_warn(FW_WARN "deprecated pmsu binding\n");

arch/arm/mach-mvebu/platsmp.c

236

pr_warn("unable to boot CPU: %d\n", ret);

arch/arm/mach-mvebu/platsmp.c

71

pr_warn("unable to boot CPU: %d\n", ret);

arch/arm/mach-mvebu/pm.c

193

pr_warn("Entering suspend to RAM. Only special wake-up sources will resume the system\n");

arch/arm/mach-mvebu/pmsu.c

177

pr_warn(FW_WARN "deprecated pmsu binding\n");

arch/arm/mach-mvebu/pmsu.c

382

pr_warn("CPU idle is currently broken: disabling\n");

arch/arm/mach-mvebu/pmsu.c

429

pr_warn("CPU idle is currently broken on Armada 38x: disabling\n");

arch/arm/mach-mvebu/pmsu.c

509

pr_warn("CPU hotplug support is currently broken on Armada 38x: disabling\n");

arch/arm/mach-omap1/irq.c

217

pr_warn("Couldn't allocate IRQ numbers\n");

arch/arm/mach-omap1/omap-dma.c

706

pr_warn("Spurious interrupt from DMA channel %d (CSR %04x)\n",

arch/arm/mach-omap1/omap-dma.c

711

pr_warn("DMA timeout with device %d\n", dma_chan[ch].dev_id);

arch/arm/mach-omap1/omap-dma.c

713

pr_warn("DMA synchronization event drop occurred with device %d\n",

arch/arm/mach-omap2/board-n8x0.c

299

pr_warn("MMC: notify cover event not available\n");

arch/arm/mach-omap2/display.c

404

pr_warn("dss_core: waiting for reset to finish failed\n");

arch/arm/mach-omap2/hdq1w.c

57

pr_warn("%s: %s: softreset failed (waited %d usec)\n",

arch/arm/mach-omap2/i2c.c

67

pr_warn("%s: %s: softreset failed (waited %d usec)\n",

arch/arm/mach-omap2/id.c

518

pr_warn("Warning: unknown chip type: hawkeye %04x, assuming OMAP3630ES1.2\n",

arch/arm/mach-omap2/id.c

709

pr_warn("%s: unknown idcode=0x%08x (hawkeye=0x%08x,rev=0x%x)\n",

arch/arm/mach-omap2/msdi.c

64

pr_warn("%s: %s: softreset failed (waited %d usec)\n",

arch/arm/mach-omap2/omap-smp.c

279

pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",

arch/arm/mach-omap2/omap-smp.c

320

pr_warn("smp: CPU1 not parked?\n");

arch/arm/mach-omap2/omap-wakeupgen.c

181

pr_warn("wakeupgen: irq%li polarity inverted in dts\n",

arch/arm/mach-omap2/omap4-common.c

134

pr_warn("%s:Unable to allocate sram needed to handle errata I688\n",

arch/arm/mach-omap2/omap4-common.c

138

pr_warn("%s:Unable to get sram pool needed to handle errata I688\n",

arch/arm/mach-omap2/omap4-common.c

202

pr_warn("%s: lost localtimer interrupt\n", __func__);

arch/arm/mach-omap2/omap_hwmod.c

1384

pr_warn("omap_hwmod: %s: could not associate to clkdm %s\n",

arch/arm/mach-omap2/omap_hwmod.c

1424

pr_warn("omap_hwmod: %s: cannot _init_clocks\n", oh->name);

arch/arm/mach-omap2/omap_hwmod.c

1546

pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name);

arch/arm/mach-omap2/omap_hwmod.c

1670

pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",

arch/arm/mach-omap2/omap_hwmod.c

1704

pr_warn("omap_hwmod: %s: reset can only be entered from enabled state\n",

arch/arm/mach-omap2/omap_hwmod.c

1727

pr_warn("omap_hwmod: %s: softreset failed (waited %d usec)\n",

arch/arm/mach-omap2/omap_hwmod.c

2327

pr_warn("omap_hwmod: %s using broken dt data from %pOFn\n",

arch/arm/mach-omap2/omap_hwmod.c

2413

pr_warn("omap_hwmod: %s: cannot be enabled for reset (%d)\n",

arch/arm/mach-omap2/omap_hwmod.c

541

pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name);

arch/arm/mach-omap2/omap_hwmod.c

842

pr_warn("omap_hwmod: %s: cannot clk_get main_clk %s\n",

arch/arm/mach-omap2/omap_hwmod.c

882

pr_warn("omap_hwmod: %s: cannot clk_get interface_clk %s\n",

arch/arm/mach-omap2/omap_hwmod.c

919

pr_warn("omap_hwmod: %s: cannot clk_get opt_clk %s\n",

arch/arm/mach-omap2/pdata-quirks.c

255

pr_warn("RX-51: Not enabling ARM errata 430973 workaround\n");

arch/arm/mach-omap2/pdata-quirks.c

256

pr_warn("Thumb binaries may crash randomly without this workaround\n");

arch/arm/mach-omap2/pm.c

155

pr_warn("%s: pm soc init failed: %i\n", __func__, error);

arch/arm/mach-omap2/pm33xx-core.c

331

pr_warn("PM not initialized for pm33xx, wkup_m3_ipc, or am335x-pm-firmware.elf\n");

arch/arm/mach-omap2/pm33xx-core.c

397

pr_warn("%s: cpuidle states reached max possible\n",

arch/arm/mach-omap2/pm33xx-core.c

60

pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n");

arch/arm/mach-omap2/pm33xx-core.c

75

pr_warn("WARNING: This platform does not support off-mode, entering DeepSleep suspend.\n");

arch/arm/mach-omap2/pm34xx.c

373

pr_warn("%s: Core OFF disabled due to errata i583\n",

arch/arm/mach-omap2/pm34xx.c

479

pr_warn("PM: no software I/O chain control; some wakeups may be lost\n");

arch/arm/mach-omap2/prm3xxx.c

414

pr_warn("PRM: I/O chain clock line assertion timed out\n");

arch/arm/mach-omap2/prm44xx.c

325

pr_warn("PRM: I/O chain clock line assertion timed out\n");

arch/arm/mach-omap2/prm44xx.c

338

pr_warn("PRM: I/O chain clock line deassertion timed out\n");

arch/arm/mach-omap2/smartreflex-class3.c

20

pr_warn("%s: Curr voltage unknown. Cannot enable %s\n",

arch/arm/mach-omap2/vc.c

223

pr_warn("%s: Retry count exceeded\n", __func__);

arch/arm/mach-omap2/vc.c

507

pr_warn("%s: invalid setuptime for vdd_%s\n", __func__,

arch/arm/mach-omap2/vc.c

707

pr_warn("%s: unsupported sysclk rate: %d!\n", __func__,

arch/arm/mach-omap2/vc.c

751

pr_warn("%s: I2C config for vdd_%s does not match other channels (%u).\n",

arch/arm/mach-omap2/voltage.c

102

pr_warn("%s: not scaling. OPP voltage for %lu, not found.\n",

arch/arm/mach-omap2/voltage.c

128

pr_warn("%s: VDD specified does not exist!\n", __func__);

arch/arm/mach-omap2/voltage.c

158

pr_warn("%s: VDD specified does not exist!\n", __func__);

arch/arm/mach-omap2/voltage.c

186

pr_warn("%s: VDD specified does not exist!\n", __func__);

arch/arm/mach-omap2/voltage.c

191

pr_warn("%s: voltage table does not exist for vdd_%s\n",

arch/arm/mach-omap2/voltage.c

220

pr_warn("%s: VDD specified does not exist!\n", __func__);

arch/arm/mach-omap2/voltage.c

254

pr_warn("%s: Could not get sys clk.\n", __func__);

arch/arm/mach-omap2/voltage.c

55

pr_warn("%s: VDD specified does not exist!\n", __func__);

arch/arm/mach-omap2/voltage.c

77

pr_warn("%s: VDD specified does not exist!\n", __func__);

arch/arm/mach-omap2/vp.c

144

pr_warn("%s: vdd_%s TRANXDONE timeout exceeded. Voltage change aborted\n",

arch/arm/mach-omap2/vp.c

181

pr_warn("%s: vdd_%s TRANXDONE timeout exceeded while trying to clear the TRANXDONE status\n",

arch/arm/mach-omap2/vp.c

203

pr_warn("%s: VDD specified does not exist!\n", __func__);

arch/arm/mach-omap2/vp.c

220

pr_warn("%s: unable to find current voltage for %s\n",

arch/arm/mach-omap2/vp.c

248

pr_warn("%s: VDD specified does not exist!\n", __func__);

arch/arm/mach-omap2/vp.c

261

pr_warn("%s: Trying to disable VP for vdd_%s when it is already disabled\n",

arch/arm/mach-omap2/vp.c

278

pr_warn("%s: vdd_%s idle timedout\n", __func__, voltdm->name);

arch/arm/mach-omap2/wd_timer.c

94

pr_warn("%s: %s: softreset failed (waited %d usec)\n",

arch/arm/mach-orion5x/dns323-setup.c

579

pr_warn("DNS-323: Timeout accessing PHY, assuming rev B1\n");

arch/arm/mach-orion5x/dns323-setup.c

591

pr_warn("DNS-323: Timeout reading PHY, assuming rev B1\n");

arch/arm/mach-orion5x/dns323-setup.c

606

pr_warn("DNS-323: Unknown PHY ID 0x%04x, assuming rev B1\n",

arch/arm/mach-orion5x/terastation_pro2-setup.c

348

pr_warn("tsp2_init: failed to get RTC IRQ\n");

arch/arm/mach-orion5x/ts209-setup.c

313

pr_warn("qnap_ts209_init: failed to get RTC IRQ\n");

arch/arm/mach-orion5x/ts409-setup.c

309

pr_warn("qnap_ts409_init: failed to get RTC IRQ\n");

arch/arm/mach-orion5x/ts78xx-setup.c

356

pr_warn("unrecognised FPGA revision 0x%.2x\n",

arch/arm/mach-pxa/gumstix.c

139

pr_warn("32kHz clock was not on. Bootloader may need to be updated\n");

arch/arm/mach-pxa/mfp-pxa2xx.c

109

pr_warn("%s: GPIO%d unable to wakeup\n", __func__, gpio);

arch/arm/mach-pxa/mfp-pxa2xx.c

114

pr_warn("%s: output GPIO%d unable to wakeup\n", __func__, gpio);

arch/arm/mach-pxa/mfp-pxa2xx.c

126

pr_warn("%s: GPIO%d is invalid pin\n", __func__, gpio);

arch/arm/mach-pxa/mfp-pxa2xx.c

95

pr_warn("%s: GPIO%d: unsupported low power mode\n",

arch/arm/mach-qcom/platsmp.c

366

pr_warn("Failed to set CPU boot address, disabling SMP\n");

arch/arm/mach-socfpga/pm.c

45

pr_warn("%s: failed to find ocram device!\n", __func__);

arch/arm/mach-socfpga/pm.c

52

pr_warn("%s: ocram pool unavailable!\n", __func__);

arch/arm/mach-socfpga/pm.c

59

pr_warn("%s: unable to alloc ocram!\n", __func__);

arch/arm/mach-socfpga/pm.c

70

pr_warn("%s: __arm_ioremap_exec failed!\n", __func__);

arch/arm/mach-spear/hotplug.c

99

pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);

arch/arm/mach-spear/platsmp.c

103

pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",

arch/arm/mach-tegra/irq.c

92

pr_warn("Outdated DT detected, suspend/resume will NOT work\n");

arch/arm/mach-versatile/hotplug.c

101

pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);

arch/arm/mach-versatile/spc.c

562

pr_warn("failed to get cpu%d device\n", cpu);

arch/arm/mach-versatile/spc.c

567

pr_warn("failed to register cpu%d clock\n", cpu);

arch/arm/mach-versatile/spc.c

571

pr_warn("failed to register cpu%d clock lookup\n", cpu);

arch/arm/mach-versatile/spc.c

580

pr_warn("failed to initialise cpu%d opp table\n", cpu);

arch/arm/mach-versatile/spc.c

583

pr_warn("failed to mark OPPs shared for cpu%d\n", cpu);

arch/arm/mach-zynq/platsmp.c

49

pr_warn("BOOTUP jump vectors not accessible\n");

arch/arm/mach-zynq/platsmp.c

78

pr_warn("Can't start CPU%d: Wrong starting address %x\n", cpu, address);

arch/arm/mach-zynq/pm.c

42

pr_warn("%s: no compatible node found for '%s'\n", __func__,

arch/arm/mach-zynq/pm.c

60

pr_warn("%s: Unable to map DDRC IO memory.\n", __func__);

arch/arm/mm/alignment.c

115

pr_warn("alignment: ignoring faults is unsafe on this CPU. Defaulting to fixup mode.\n");

arch/arm/mm/cache-l2x0-pmu.c

512

pr_warn("Unable to allocate L2x0 PMU\n");

arch/arm/mm/cache-l2x0.c

1792

pr_warn("L2C: platform modifies aux control register: 0x%08x -> 0x%08x\n",

arch/arm/mm/cache-l2x0.c

619

pr_warn("L2C-310 early BRESP only supported with Cortex-A9\n");

arch/arm/mm/cache-l2x0.c

809

pr_warn("L2C: DT/platform modifies aux control register: 0x%08x -> 0x%08x\n",

arch/arm/mm/cache-l2x0.c

816

pr_warn("L2C: DT/platform tries to modify or specify cache size\n");

arch/arm/mm/cache-l2x0.c

970

pr_warn("L2C OF: no cache block/line size given: "

arch/arm/mm/cache-l2x0.c

978

pr_warn("L2C OF: DT supplied line size %d bytes does "

arch/arm/mm/dma-mapping.c

1665

pr_warn("Failed to create %llu-byte IOMMU mapping for device %s\n",

arch/arm/mm/dma-mapping.c

1671

pr_warn("Failed to attached device %s to IOMMU_mapping\n",

arch/arm/mm/dump.c

467

pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found\n",

arch/arm/mm/fault.c

694

pr_warn("Hit pending asynchronous external abort (FSR=0x%08x) during "

arch/arm/mm/idmap.c

33

pr_warn("Failed to allocate identity pmd.\n");

arch/arm/mm/init.c

56

pr_warn("ATAG_INITRD is deprecated; "

arch/arm/mm/mmu.c

1167

pr_warn("vmalloc area is too small, limiting to %luMiB\n",

arch/arm/mm/mmu.c

1174

pr_warn("vmalloc area is too big, limiting to %luMiB\n",

arch/arm/mm/mmu.c

165

pr_warn("Only cachepolicy=%s supported on ARMv6 and later\n",

arch/arm/mm/mmu.c

183

pr_warn("nocache is deprecated; use cachepolicy=%s\n", p);

arch/arm/mm/mmu.c

192

pr_warn("nowb is deprecated; use cachepolicy=%s\n", p);

arch/arm/mm/mmu.c

214

pr_warn("cachepolicy kernel parameter not supported without cp15\n");

arch/arm/mm/mmu.c

221

pr_warn("noalign kernel parameter not supported without cp15\n");

arch/arm/mm/mmu.c

467

pr_warn("Forcing write-allocate cache policy for SMP\n");

arch/arm/mm/mmu.c

471

pr_warn("Forcing shared mappings for SMP\n");

arch/arm/mm/mmu.c

953

pr_warn("BUG: map for 0x%08llx at 0x%08lx can not be mapped using pages, ignoring.\n",

arch/arm/mm/mmu.c

980

pr_warn("BUG: not creating mapping for 0x%08llx at 0x%08lx in user region\n",

arch/arm/mm/mmu.c

988

pr_warn("BUG: mapping for 0x%08llx at 0x%08lx out of vmalloc space\n",

arch/arm/mm/pmsa-v7.c

306

pr_warn("Truncating memory from %pa to %pa (MPU region constraints)",

arch/arm/mm/pmsa-v8.c

304

pr_warn("MPU region initialization failure! %d", err);

arch/arm/probes/kprobes/core.c

283

pr_warn("Failed to recover from reentered kprobes.\n");

arch/arm/vfp/vfpsingle.c

293

pr_warn("VFP: estimate_sqrt: invalid significand\n");

arch/arm/xen/p2m.c

58

pr_warn("%s: cannot add pfn=%pa -> mfn=%pa: pfn=%pa -> mfn=%pa already exists\n",

arch/arm64/kernel/acpi.c

310

pr_warn(FW_BUG "requested region covers multiple EFI memory regions\n");

arch/arm64/kernel/acpi.c

334

pr_warn(FW_BUG "requested region covers kernel memory @ %pa\n", &phys);

arch/arm64/kernel/armv8_deprecated.c

469

pr_warn("CPU[%u] cannot support the emulation of %s",

arch/arm64/kernel/cpu_ops.c

108

pr_warn("Unsupported enable-method: %s\n", enable_method);

arch/arm64/kernel/cpufeature.c

1048

pr_warn("%s[%d:%d]: %s to %llx\n",

arch/arm64/kernel/cpufeature.c

1055

pr_warn("%s[%d:%d]: impossible override, ignored\n",

arch/arm64/kernel/cpufeature.c

1246

pr_warn("SANITY CHECK: Unexpected variation in %s. Boot CPU: %#016llx, CPU%d: %#016llx\n",

arch/arm64/kernel/cpufeature.c

2114

pr_warn("unavailable: %s\n", cap->desc);

arch/arm64/kernel/cpufeature.c

3990

pr_warn("No Cache Writeback Granule information, assuming %d\n",

arch/arm64/kernel/debug-monitors.c

201

pr_warn("Unexpected kernel single-step exception at EL1\n");

arch/arm64/kernel/efi.c

254

pr_warn("Failed to allocate EFI runtime stack\n");

arch/arm64/kernel/fpsimd.c

1054

pr_warn("%s: cpu%d: Required vector length(s) missing\n",

arch/arm64/kernel/fpsimd.c

1083

pr_warn("%s: cpu%d: Unsupported vector length(s) present\n",

arch/arm64/kernel/fpsimd.c

1149

pr_warn("%s: unvirtualisable vector lengths present\n",

arch/arm64/kernel/hw_breakpoint.c

117

pr_warn("attempt to read from unknown breakpoint register %d\n", n);

arch/arm64/kernel/hw_breakpoint.c

132

pr_warn("attempt to write to unknown breakpoint register %d\n", n);

arch/arm64/kernel/hw_breakpoint.c

150

pr_warn("invalid breakpoint privilege level %d\n", privilege);

arch/arm64/kernel/hw_breakpoint.c

56

pr_warn("unknown slot type: %d\n", type);

arch/arm64/kernel/kaslr.c

28

pr_warn("KASLR disabled due to lack of seed\n");

arch/arm64/kernel/paravirt.c

105

pr_warn("Failed to map stolen time data structure\n");

arch/arm64/kernel/probes/kprobes.c

248

pr_warn("Failed to recover from reentered kprobes.\n");

arch/arm64/kernel/psci.c

106

pr_warn("CPU%d may not have shut down cleanly (AFFINITY_INFO reports %d)\n",

arch/arm64/kernel/sdei.c

233

pr_warn("unsafe: exception during handler\n");

arch/arm64/kernel/setup.c

167

pr_warn("Large number of MPIDR hash buckets detected\n");

arch/arm64/kernel/setup.c

327

pr_warn(FW_BUG "Kernel image misaligned at boot, please fix your bootloader!");

arch/arm64/kernel/smp.c

1260

pr_warn("SMP: failed to stop secondary CPUs %*pbl\n",

arch/arm64/kernel/smp.c

359

pr_warn("CPU%d may not have shut down cleanly: %d\n", cpu, err);

arch/arm64/kernel/smp.c

749

pr_warn("Number of cores (%d) exceeds configured maximum of %u - clipping\n",

arch/arm64/kvm/reset.c

72

pr_warn("KVM: SVE vector length for guests limited to %u bytes\n",

arch/arm64/kvm/vgic/vgic-v3.c

931

pr_warn(FW_BUG "CPU interface incapable of MMIO access\n");

arch/arm64/kvm/vgic/vgic-v3.c

933

pr_warn("GICV physical address 0x%llx not page aligned\n",

arch/arm64/mm/context.c

50

pr_warn("CPU%d: Unknown ASID size (%d); assuming 8-bit\n",

arch/arm64/mm/hugetlbpage.c

364

pr_warn("%s: unrecognized huge page size 0x%lx\n",

arch/arm64/mm/hugetlbpage.c

70

pr_warn("%s: unrecognized huge page size 0x%lx\n",

arch/arm64/mm/init.c

221

pr_warn("Memory doesn't fit in the linear mapping, VA_BITS too small\n");

arch/arm64/mm/mmu.c

1007

pr_warn("BUG: not updating mapping for %pa at 0x%016lx - outside kernel range\n",

arch/arm64/mm/mmu.c

2047

pr_warn("Boot memory [%lx %lx] offlining attempted\n", start, end);

arch/arm64/mm/mmu.c

980

pr_warn("BUG: not creating mapping for %pa at 0x%016lx - outside kernel range\n",

arch/arm64/mm/ptdump.c

366

pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found, %lu non-UXN pages found\n",

arch/csky/kernel/probes/kprobes.c

232

pr_warn("Failed to recover from reentered kprobes.\n");

arch/loongarch/kernel/acpi.c

184

pr_warn("Invalid BIOS PPTT\n");

arch/loongarch/kernel/acpi.c

68

pr_warn(PREFIX "nr_cpus limit of %i reached."

arch/loongarch/kernel/cpu-probe.c

157

pr_warn("Warning: unknown ISA level\n");

arch/loongarch/kernel/cpu-probe.c

270

pr_warn("Warning: unknown TLB type\n");

arch/loongarch/kernel/env.c

77

pr_warn("No valid CPU clock freq, assume 200MHz.\n");

arch/loongarch/kernel/hw_breakpoint.c

103

pr_warn("Attempt to write to unknown breakpoint register %d\n", n);

arch/loongarch/kernel/hw_breakpoint.c

31

pr_warn("unknown slot type: %d\n", type);

arch/loongarch/kernel/hw_breakpoint.c

88

pr_warn("Attempt to read from unknown breakpoint register %d\n", n);

arch/loongarch/kernel/inst.c

22

pr_warn("%s: invalid pc 0x%lx\n", __func__, pc);

arch/loongarch/kernel/inst.c

309

pr_warn("The generated b instruction is out of range.\n");

arch/loongarch/kernel/inst.c

324

pr_warn("The generated bl instruction is out of range.\n");

arch/loongarch/kernel/inst.c

338

pr_warn("The generated break instruction is out of range.\n");

arch/loongarch/kernel/inst.c

366

pr_warn("The generated lu12i.w instruction is out of range.\n");

arch/loongarch/kernel/inst.c

380

pr_warn("The generated lu32i.d instruction is out of range.\n");

arch/loongarch/kernel/inst.c

394

pr_warn("The generated lu52i.d instruction is out of range.\n");

arch/loongarch/kernel/inst.c

408

pr_warn("The generated beq instruction is out of range.\n");

arch/loongarch/kernel/inst.c

422

pr_warn("The generated bne instruction is out of range.\n");

arch/loongarch/kernel/inst.c

436

pr_warn("The generated jirl instruction is out of range.\n");

arch/loongarch/kernel/inst.c

54

pr_warn("%s: invalid pc 0x%lx\n", __func__, pc);

arch/loongarch/kernel/irq.c

36

pr_warn("Unexpected IRQ # %d\n", irq);

arch/loongarch/kernel/kgdb.c

303

pr_warn("%s: invalid pc 0x%lx\n", __func__, pc);

arch/loongarch/kernel/kprobes.c

194

pr_warn("Failed to recover from reentered kprobes.\n");

arch/loongarch/kernel/module.c

503

pr_warn("%s: Unknown symbol %s\n", mod->name, strtab + sym->st_name);

arch/loongarch/kernel/numa.c

87

pr_warn("%s allocator failed (%d), falling back to page size\n",

arch/loongarch/kernel/paravirt.c

225

pr_warn("Illegal PV steal time addr %lx\n", addr);

arch/loongarch/kernel/perf_event.c

562

pr_warn("PMU IRQ request failed\n");

arch/loongarch/kernel/process.c

369

pr_warn("Unable to send backtrace IPI to CPU%u - perhaps it hung?\n",

arch/loongarch/kernel/setup.c

183

pr_warn("Unknown writecombine setting \"%s\".\n", p);

arch/loongarch/kernel/setup.c

254

pr_warn("elfcorehdr is overlapped\n");

arch/loongarch/kernel/setup.c

525

pr_warn("Failed to reserve legacy IO in Logic PIO\n");

arch/loongarch/kernel/traps.c

808

pr_warn("Hardware watch point handler not implemented!\n");

arch/loongarch/mm/init.c

86

pr_warn("%s: Problem encountered in __add_pages() as ret=%d\n",

arch/loongarch/mm/kasan_init.c

279

pr_warn("PGDIR_SIZE too large for cpu_vabits, KernelAddressSanitizer disabled.\n");

arch/loongarch/net/bpf_jit.c

1609

pr_warn("bpf_jit: invalid size %d for sign_extend\n", size);

arch/loongarch/net/bpf_jit.h

115

pr_warn("bpf_jit: invalid size %d for extension\n", size);

arch/loongarch/pci/acpi.c

204

pr_warn("pci_bus %04x:%02x: ignored (out of memory)\n", domain, busnum);

arch/m68k/amiga/config.c

191

pr_warn("amiga_parse_bootinfo: too many AutoConfig devices\n");

arch/m68k/amiga/config.c

422

pr_warn("Warning: kernel runs in Zorro II memory\n");

arch/m68k/amiga/config.c

494

pr_warn("Cannot allocate ciab.ta{lo,hi}\n");

arch/m68k/atari/atakeyb.c

231

pr_warn("Key with scancode %d ", scancode);

arch/m68k/emu/nfblock.c

111

pr_warn("nfhd%u: invalid block size\n", dev_id);

arch/m68k/emu/nfblock.c

165

pr_warn("nfhd: unable to get major number\n");

arch/m68k/kernel/ints.c

170

pr_warn("unexpected interrupt from %u\n", regs->vector);

arch/m68k/kernel/setup_mm.c

137

pr_warn("%s: too many memory chunks\n",

arch/m68k/kernel/setup_mm.c

189

pr_warn("%s: unknown tag 0x%04x ignored\n", __func__,

arch/m68k/kernel/setup_mm.c

199

pr_warn("%s: ignoring last %i chunks of physical memory\n",

arch/m68k/kernel/setup_mm.c

236

pr_warn("Enabling workaround for errata I14\n");

arch/m68k/mac/config.c

790

pr_warn("No bootinfo model ID, using cpuid instead (obsolete bootloader?)\n");

arch/m68k/mac/iop.c

295

pr_warn("IOP: oh my god, they killed the ISM IOP!\n");

arch/m68k/mac/iop.c

297

pr_warn("IOP: the ISM IOP seems to be alive.\n");

arch/m68k/q40/q40ints.c

290

pr_warn("ISA interrupt from unknown source? EIRQ_REG = %x\n",

arch/m68k/q40/q40ints.c

311

pr_warn("q40_irq_enable : nested disable/enable\n");

arch/m68k/q40/q40ints.c

54

pr_warn("%s: ISA IRQ %d not implemented by HW\n", __func__,

arch/m68k/sun3x/prom.c

108

pr_warn("Machine reports strange type %02x\n",

arch/m68k/sun3x/prom.c

110

pr_warn("Pretending it's a 3/80, but very afraid...\n");

arch/m68k/virt/ints.c

98

pr_warn("Non-Maskable Interrupt\n");

arch/microblaze/kernel/cpu/cpuinfo.c

101

pr_warn("%s: No PVR support. Using static CPU info from FDT\n",

arch/microblaze/kernel/cpu/cpuinfo.c

114

pr_warn("%s: Unsupported PVR setting\n", __func__);

arch/microblaze/kernel/cpu/cpuinfo.c

119

pr_warn("%s: Stream instructions enabled"

arch/microblaze/kernel/exceptions.c

105

pr_warn("Data bus error exception in kernel mode.\n");

arch/microblaze/kernel/exceptions.c

114

pr_warn("Divide by zero exception in kernel mode.\n");

arch/microblaze/kernel/exceptions.c

139

pr_warn("Unexpected exception %02x PC=%08x in %s mode\n",

arch/microblaze/kernel/exceptions.c

44

pr_warn("Oops: %s, sig: %ld\n", str, err);

arch/microblaze/kernel/exceptions.c

75

pr_warn("Exception %02x in %s mode, FSR=%08x PC=%08x ESR=%08x\n",

arch/microblaze/kernel/exceptions.c

87

pr_warn("Illegal opcode exception in kernel mode.\n");

arch/microblaze/kernel/exceptions.c

96

pr_warn("Instruction bus error exception in kernel mode.\n");

arch/microblaze/mm/fault.c

101

pr_warn("kernel task_size exceed");

arch/microblaze/mm/pgtable.c

76

pr_warn("__ioremap(): phys addr "PTE_FMT" is RAM lr %ps\n",

arch/mips/alchemy/devboards/db1200.c

829

pr_warn("DB1200: can't get I2C close to 50MHz\n");

arch/mips/alchemy/devboards/db1300.c

813

pr_warn("DB1300: failed to init touch pen irq support!\n");

arch/mips/ath25/board.c

133

pr_warn("WARNING: No board configuration data found!\n");

arch/mips/ath25/board.c

143

pr_warn("WARNING: broken board data detected\n");

arch/mips/ath25/board.c

161

pr_warn("WARNING: Could not find Radio Configuration data\n");

arch/mips/bcm47xx/prom.c

176

pr_warn("Found %lu MiB of extra memory, but highmem is unsupported yet!\n",

arch/mips/bcm63xx/dev-flash.c

121

pr_warn("unsupported serial flash detected\n");

arch/mips/bcm63xx/dev-flash.c

124

pr_warn("unsupported NAND flash detected\n");

arch/mips/bcm63xx/nvram.c

37

pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",

arch/mips/cavium-octeon/octeon-irq.c

1612

pr_warn("No \"interrupts\" property.\n");

arch/mips/cavium-octeon/octeon-irq.c

1621

pr_warn("No \"interrupts\" property.\n");

arch/mips/cavium-octeon/octeon-irq.c

1626

pr_warn("No \"interrupts\" property.\n");

arch/mips/cavium-octeon/octeon-irq.c

1631

pr_warn("Bad \"#interrupt-cells\" property: %u\n",

arch/mips/cavium-octeon/octeon-irq.c

1643

pr_warn("Cannot allocate memory for GPIO irq_domain.\n");

arch/mips/generic/board-sead3.c

91

pr_warn("unable to set UART interrupt-parent: %d\n",

arch/mips/generic/yamon-dt.c

101

pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");

arch/mips/generic/yamon-dt.c

171

pr_warn("yamontty environment variable '%s' invalid\n",

arch/mips/generic/yamon-dt.c

55

pr_warn("Number of regions exceeds max %u\n",

arch/mips/generic/yamon-dt.c

96

pr_warn("Failed to read the '%s' env variable '%s'\n",

arch/mips/include/asm/octeon/cvmx-pow.h

1316

pr_warn("%s called with tag switch in progress\n", function);

arch/mips/include/asm/octeon/cvmx-pow.h

1334

pr_warn("Tag switch is taking a long time, possible deadlock\n");

arch/mips/include/asm/octeon/cvmx-pow.h

1545

pr_warn("%s called with NULL_NULL tag\n", __func__);

arch/mips/include/asm/octeon/cvmx-pow.h

1547

pr_warn("%s called with NULL tag\n", __func__);

arch/mips/include/asm/octeon/cvmx-pow.h

1550

pr_warn("%s called to perform a tag switch to the same tag\n",

arch/mips/include/asm/octeon/cvmx-pow.h

1553

pr_warn("%s called to perform a tag switch to NULL. Use cvmx_pow_tag_sw_null() instead\n",

arch/mips/include/asm/octeon/cvmx-pow.h

1653

pr_warn("%s called with NULL_NULL tag\n", __func__);

arch/mips/include/asm/octeon/cvmx-pow.h

1656

pr_warn("%s called to perform a tag switch to the same tag\n",

arch/mips/include/asm/octeon/cvmx-pow.h

1659

pr_warn("%s called to perform a tag switch to NULL. Use cvmx_pow_tag_sw_null() instead\n",

arch/mips/include/asm/octeon/cvmx-pow.h

1663

pr_warn("%s passed WQE(%p) doesn't match the address in the POW(%p)\n",

arch/mips/include/asm/octeon/cvmx-pow.h

1749

pr_warn("%s called with NULL_NULL tag\n", __func__);

arch/mips/include/asm/octeon/cvmx-pow.h

1751

pr_warn("%s called when we already have a NULL tag\n",

arch/mips/include/asm/octeon/cvmx-pow.h

1966

pr_warn("%s called with NULL_NULL tag\n", __func__);

arch/mips/include/asm/octeon/cvmx-pow.h

1968

pr_warn("%s called with NULL tag. Deschedule not allowed from NULL state\n",

arch/mips/include/asm/octeon/cvmx-pow.h

1972

pr_warn("%s called where neither the before or after tag is ATOMIC\n",

arch/mips/include/asm/octeon/cvmx-pow.h

2070

pr_warn("%s called with NULL_NULL tag\n", __func__);

arch/mips/include/asm/octeon/cvmx-pow.h

2072

pr_warn("%s called with NULL tag. Deschedule not expected from NULL state\n",

arch/mips/kernel/cpu-probe.c

105

pr_warn("Can't turn FTLB off\n");

arch/mips/kernel/cpu-probe.c

116

pr_warn("FTLB could not be disabled!\n");

arch/mips/kernel/csrc-r4k.c

65

pr_warn("Not using R4K clocksource in VDSO due to broken RDHWR\n");

arch/mips/kernel/ftrace.c

68

pr_warn("ftrace: mcount address beyond 32 bits is not supported (%lX)\n",

arch/mips/kernel/module.c

335

pr_warn("%s: Unknown symbol %s\n",

arch/mips/kernel/perf_event_mipsxx.c

604

pr_warn("Unable to request IRQ%d for MIPS performance counters!\n",

arch/mips/kernel/perf_event_mipsxx.c

615

pr_warn("The platform hasn't properly defined its interrupt controller\n");

arch/mips/kernel/pm-cps.c

690

pr_warn("JTAG probe is connected - abort suspend\n");

arch/mips/kernel/pm-cps.c

703

pr_warn("pm-cps: no CM, non-coherent states unavailable\n");

arch/mips/kernel/pm-cps.c

715

pr_warn("pm-cps: non-coherent wait unavailable\n");

arch/mips/kernel/pm-cps.c

723

pr_warn("pm-cps: CPC does not support clock gating\n");

arch/mips/kernel/pm-cps.c

729

pr_warn("pm-cps: CPS SMP not in use, power gating unavailable\n");

arch/mips/kernel/pm-cps.c

731

pr_warn("pm-cps: no CPC, clock & power gating unavailable\n");

arch/mips/kernel/process.c

746

pr_warn("Unable to send backtrace IPI to CPU%u - perhaps it hung?\n",

arch/mips/kernel/rtlx-mt.c

74

pr_warn("VPE loader: not a MIPS MT capable processor\n");

arch/mips/kernel/rtlx-mt.c

79

pr_warn("No TCs reserved for AP/SP, not initializing RTLX.\n"

arch/mips/kernel/rtlx.c

154

pr_warn("vpe_get_shared returned an invalid pointer maybe an error code %d\n",

arch/mips/kernel/setup.c

471

pr_warn("crashkernel reservation failed - No suitable area found.\n");

arch/mips/kernel/setup.c

481

pr_warn("Invalid memory region reserved for crash kernel\n");

arch/mips/kernel/smp-cps.c

335

pr_warn("Using only one core due to %s%s%s\n",

arch/mips/kernel/smp-cps.c

579

pr_warn("Waiting for core %u to start... STAT_CONF=0x%x\n",

arch/mips/kernel/smp-cps.c

703

pr_warn("Core %u is not in coherent domain\n", core);

arch/mips/kernel/smp-cps.c

80

pr_warn("Waiting for cluster %u CM to power up... STAT_CONF=0x%x\n",

arch/mips/kernel/smp-cps.c

964

pr_warn("MIPS CPS SMP unable to proceed without a CM\n");

arch/mips/kernel/smp-cps.c

970

pr_warn("MIPS CPS SMP unable to proceed without a GIC\n");

arch/mips/kernel/sync-r4k.c

147

pr_warn("Counter warped randomly between CPUs\n");

arch/mips/kernel/traps.c

2360

pr_warn("ebase(%pa) should better be in KSeg0",

arch/mips/kernel/vpe-mt.c

334

pr_warn("VPE loader: not a MIPS MT capable processor\n");

arch/mips/kernel/vpe-mt.c

339

pr_warn("No VPEs reserved for AP/SP, not initialize VPE loader\n"

arch/mips/kernel/vpe-mt.c

346

pr_warn("No TCs reserved for AP/SP, not initialize VPE loader\n"

arch/mips/kernel/vpe-mt.c

354

pr_warn("VPE loader: unable to register character device\n");

arch/mips/kernel/vpe-mt.c

37

pr_warn("VPE loader: only Master VPE's are able to config MT\n");

arch/mips/kernel/vpe-mt.c

412

pr_warn("VPE: unable to allocate VPE\n");

arch/mips/kernel/vpe-mt.c

51

pr_warn("VPE loader: No TC's associated with VPE %d\n",

arch/mips/kernel/vpe-mt.c

71

pr_warn("VPE loader: TC %d is already active!\n",

arch/mips/kernel/vpe.c

459

pr_warn("VPE loader: .text+0x%x relocation type %s for symbol \"%s\" failed\n",

arch/mips/kernel/vpe.c

597

pr_warn("VPE loader: program wrong arch or weird elf version\n");

arch/mips/kernel/vpe.c

736

pr_warn("VPE loader: program does not contain a __start symbol\n");

arch/mips/kernel/vpe.c

741

pr_warn("VPE loader: program does not contain vpe_shared symbol.\n"

arch/mips/kernel/vpe.c

758

pr_warn("VPE loader: only vpe1 is supported\n");

arch/mips/kernel/vpe.c

765

pr_warn("VPE loader: unable to get vpe\n");

arch/mips/kernel/vpe.c

784

pr_warn("VPE loader: unable to allocate memory\n");

arch/mips/kernel/vpe.c

812

pr_warn("VPE loader: ELF load failed.\n");

arch/mips/kernel/vpe.c

816

pr_warn("VPE loader: only elf files are supported\n");

arch/mips/kernel/vpe.c

833

pr_warn("VPE loader: ELF load failed.\n");

arch/mips/kernel/vpe.c

853

pr_warn("VPE loader: elf size too big. Perhaps strip unneeded symbols\n");

arch/mips/kvm/mips.c

1606

pr_warn("KVM does not yet support MMIDs. KVM Disabled\n");

arch/mips/lantiq/xway/sysctrl.c

184

pr_warn("deactivating PMU module failed!");

arch/mips/lantiq/xway/sysctrl.c

247

pr_warn("deactivating PMU module failed!");

arch/mips/loongson64/env.c

123

pr_warn("Ignore UART 0x%llx with iotype %u passed by firmware\n",

arch/mips/loongson64/env.c

78

pr_warn("UART 0x%llx misses clock-frequency property\n",

arch/mips/loongson64/env.c

82

pr_warn("UART 0x%llx has invalid clock-frequency property\n",

arch/mips/loongson64/init.c

212

pr_warn("Failed to reserve legacy IO in Logic PIO\n");

arch/mips/mm/init.c

307

pr_warn("Not enough MAAR pairs (%u) for all memory regions (%u)\n",

arch/mips/mm/tlbex.c

2432

pr_warn("Unsupported PTEI field value: 0x%lx. HTW will not be enabled",

arch/mips/mti-malta/malta-dtshim.c

158

pr_warn("Failed to read the '%s' env variable '%s'\n",

arch/mips/mti-malta/malta-dtshim.c

163

pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n");

arch/mips/mti-malta/malta-dtshim.c

256

pr_warn("malta-dtshim: unable to find DT GIC node: %d\n",

arch/mips/mti-malta/malta-dtshim.c

263

pr_warn("malta-dtshim: unable to nop GIC node\n");

arch/mips/mti-malta/malta-dtshim.c

267

pr_warn("malta-dtshim: unable to find DT i8259 node: %d\n",

arch/mips/mti-malta/malta-dtshim.c

275

pr_warn("malta-dtshim: unable to find CPU intc node: %d\n",

arch/mips/mti-malta/malta-dtshim.c

282

pr_warn("malta-dtshim: unable to get CPU intc phandle\n");

arch/mips/mti-malta/malta-dtshim.c

288

pr_warn("malta-dtshim: unable to set i8259 interrupt-parent: %d\n",

arch/mips/mti-malta/malta-dtshim.c

295

pr_warn("malta-dtshim: unable to set i8259 interrupts: %d\n",

arch/mips/mti-malta/malta-setup.c

151

pr_warn("WARNING: PCI clock is %dMHz, setting pci_clock\n",

arch/mips/mti-malta/malta-setup.c

156

pr_warn("WARNING: IDE timing calculations will be "

arch/mips/pci/pci-mt7620.c

121

pr_warn("PCIE-PHY retry failed.\n");

arch/mips/pci/pci-tx4927.c

90

pr_warn("Failed to request irq for PCIERR\n");

arch/mips/pci/pci-tx4938.c

141

pr_warn("Failed to request irq for PCIERR\n");

arch/mips/sgi-ip27/ip27-xtalk.c

102

pr_warn("xtalk:n%d/%x bridge failed to add platform data.\n", nasid, widget);

arch/mips/sgi-ip27/ip27-xtalk.c

106

pr_warn("xtalk:n%d/%x bridge failed to add platform device.\n", nasid, widget);

arch/mips/sgi-ip27/ip27-xtalk.c

39

pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);

arch/mips/sgi-ip27/ip27-xtalk.c

54

pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);

arch/mips/sgi-ip27/ip27-xtalk.c

58

pr_warn("xtalk:n%d/%x bridge failed to add platform resources.\n", nasid, widget);

arch/mips/sgi-ip27/ip27-xtalk.c

62

pr_warn("xtalk:n%d/%x bridge failed to add platform data.\n", nasid, widget);

arch/mips/sgi-ip27/ip27-xtalk.c

66

pr_warn("xtalk:n%d/%x bridge failed to add platform device.\n", nasid, widget);

arch/mips/sgi-ip27/ip27-xtalk.c

74

pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);

arch/mips/sgi-ip27/ip27-xtalk.c

79

pr_warn("xtalk:n%d/%x bridge create out of memory\n", nasid, widget);

arch/mips/sgi-ip30/ip30-xtalk.c

111

pr_warn("xtalk:%x bridge failed to add platform data.\n", widget);

arch/mips/sgi-ip30/ip30-xtalk.c

115

pr_warn("xtalk:%x bridge failed to add platform device.\n", widget);

arch/mips/sgi-ip30/ip30-xtalk.c

49

pr_warn("xtalk:%x bridge create out of memory\n", widget);

arch/mips/sgi-ip30/ip30-xtalk.c

64

pr_warn("xtalk:%x bridge create out of memory\n", widget);

arch/mips/sgi-ip30/ip30-xtalk.c

68

pr_warn("xtalk:%x bridge failed to add platform resources.\n", widget);

arch/mips/sgi-ip30/ip30-xtalk.c

72

pr_warn("xtalk:%x bridge failed to add platform data.\n", widget);

arch/mips/sgi-ip30/ip30-xtalk.c

76

pr_warn("xtalk:%x bridge failed to add platform device.\n", widget);

arch/mips/sgi-ip30/ip30-xtalk.c

84

pr_warn("xtalk:%x bridge create out of memory\n", widget);

arch/mips/sgi-ip30/ip30-xtalk.c

89

pr_warn("xtalk:%x bridge create out of memory\n", widget);

arch/mips/txx9/generic/setup_tx4927.c

32

pr_warn("Watchdog reset detected at 0x%lx\n",

arch/mips/txx9/generic/setup_tx4938.c

34

pr_warn("Watchdog reset detected at 0x%lx\n",

arch/mips/txx9/generic/smsc_fdc37m81x.c

108

pr_warn("%s: stepping on old base=0x%0*lx\n", __func__, field,

arch/mips/txx9/generic/smsc_fdc37m81x.c

119

pr_warn("%s: unknown chip id 0x%02x\n", __func__, chip_id);

arch/nios2/kernel/cpuinfo.c

80

pr_warn("Warning: icache size configuration mismatch "

arch/nios2/kernel/cpuinfo.c

87

pr_warn("Warning: dcache line size configuration mismatch "

arch/nios2/kernel/cpuinfo.c

93

pr_warn("Warning: dcache size configuration mismatch "

arch/nios2/kernel/traps.c

36

pr_warn("Oops: %s, sig: %ld\n", str, err);

arch/openrisc/kernel/smp.c

105

pr_warn("CPU%u: failed to start, IPI controller missing",

arch/parisc/kernel/drivers.c

155

pr_warn("BUG: skipping previously registered driver %s\n",

arch/parisc/kernel/drivers.c

161

pr_warn("BUG: driver %s has no probe routine\n", driver->name);

arch/parisc/kernel/drivers.c

546

pr_warn("Unable to claim HPA %lx for device %s\n", hpa, name);

arch/parisc/kernel/pdt.c

135

pr_warn("PDT: BAD MEMORY at 0x%08lx, %s%s%s-bit error.\n",

arch/parisc/kernel/pdt.c

199

pr_warn("PDT: Firmware reports %lu entries of faulty memory:\n",

arch/parisc/kernel/pdt.c

221

pr_warn("PDT: Get PDT entries failed with %d\n", ret);

arch/parisc/kernel/pdt.c

278

pr_warn("PDT: unexpected failure %d\n", ret);

arch/parisc/kernel/process.c

181

pr_warn("PDC does not provide rendezvous function.\n");

arch/parisc/kernel/signal.c

446

pr_warn("syscall restart: %s (pid %d): unexpected opcode 0x%08x\n",

arch/parisc/kernel/sys_parisc.c

325

pr_warn("%s(%d) uses a deprecated O_NONBLOCK value."

arch/parisc/kernel/time.c

157

pr_warn("pdc_tod_set(%lld) returned error %d\n", secs, ret);

arch/parisc/kernel/topology.c

43

pr_warn("Failed to register CPU%d device", cpuid);

arch/parisc/kernel/unaligned.c

408

pr_warn("Kernel: unaligned access to " RFMT " in %pS "

arch/parisc/kernel/unwind.c

125

pr_warn("Out of order unwind entry! %px and %px\n",

arch/parisc/mm/fault.c

252

pr_warn("\n");

arch/parisc/mm/fault.c

253

pr_warn("do_page_fault() command='%s' type=%lu address=0x%08lx",

arch/parisc/mm/fault.c

474

pr_warn("WARNING: nullifying cache flush/purge instruction\n");

arch/powerpc/include/asm/cpuidle.h

93

pr_warn("Invalid psscr 0x%016llx : ESL,EC bits unequal",

arch/powerpc/include/asm/cpuidle.h

97

pr_warn("Invalid psscr 0x%016llx : ESL cleared for deep stop-state",

arch/powerpc/kernel/dt_cpu_ftrs.c

1016

pr_warn("%s: missing dependencies property", f->name);

arch/powerpc/kernel/dt_cpu_ftrs.c

903

pr_warn("%s: missing isa property\n", uname);

arch/powerpc/kernel/dt_cpu_ftrs.c

910

pr_warn("%s: missing usable-privilege property", uname);

arch/powerpc/kernel/dt_cpu_ftrs.c

945

pr_warn("%s: HV feature passed to guest\n", uname);

arch/powerpc/kernel/dt_cpu_ftrs.c

950

pr_warn("%s: unwanted hfscr_bit_nr\n", uname);

arch/powerpc/kernel/dt_cpu_ftrs.c

956

pr_warn("%s: missing hfscr_bit_nr\n", uname);

arch/powerpc/kernel/dt_cpu_ftrs.c

962

pr_warn("%s: unwanted hv_support/hfscr_bit_nr\n", uname);

arch/powerpc/kernel/dt_cpu_ftrs.c

969

pr_warn("%s: unwanted fscr_bit_nr\n", uname);

arch/powerpc/kernel/dt_cpu_ftrs.c

975

pr_warn("%s: missing fscr_bit_nr\n", uname);

arch/powerpc/kernel/dt_cpu_ftrs.c

981

pr_warn("%s: unwanted os_support/fscr_bit_nr\n", uname);

arch/powerpc/kernel/dt_cpu_ftrs.c

988

pr_warn("%s: unwanted hwcap_bit_nr\n", uname);

arch/powerpc/kernel/eeh.c

1128

pr_warn("%s: Failure %d enabling IO on PHB#%x-PE#%x\n",

arch/powerpc/kernel/eeh.c

1135

pr_warn("%s: Failure %d enabling DMA on PHB#%x-PE#%x\n",

arch/powerpc/kernel/eeh.c

1422

pr_warn("%s: Failure %d reenabling %s\n",

arch/powerpc/kernel/eeh.c

178

pr_warn("EEH: of node=%04x:%02x:%02x.%01x\n",

arch/powerpc/kernel/eeh.c

184

pr_warn("EEH: PCI device/vendor: %08x\n", cfg);

arch/powerpc/kernel/eeh.c

188

pr_warn("EEH: PCI cmd/status register: %08x\n", cfg);

arch/powerpc/kernel/eeh.c

194

pr_warn("EEH: Bridge secondary status: %04x\n", cfg);

arch/powerpc/kernel/eeh.c

198

pr_warn("EEH: Bridge control: %04x\n", cfg);

arch/powerpc/kernel/eeh.c

206

pr_warn("EEH: PCI-X cmd: %08x\n", cfg);

arch/powerpc/kernel/eeh.c

210

pr_warn("EEH: PCI-X status: %08x\n", cfg);

arch/powerpc/kernel/eeh.c

217

pr_warn("EEH: PCI-E capabilities and status follow:\n");

arch/powerpc/kernel/eeh.c

225

pr_warn("%s\n", buffer);

arch/powerpc/kernel/eeh.c

237

pr_warn("%s\n", buffer);

arch/powerpc/kernel/eeh.c

244

pr_warn("EEH: PCI-E AER capability register set follows:\n");

arch/powerpc/kernel/eeh.c

252

pr_warn("%s\n", buffer);

arch/powerpc/kernel/eeh.c

263

pr_warn("%s\n", buffer);

arch/powerpc/kernel/eeh.c

369

pr_warn("%s Can't find PE for PHB#%x\n",

arch/powerpc/kernel/eeh.c

637

pr_warn("%s: Invalid function %d\n",

arch/powerpc/kernel/eeh.c

664

pr_warn("%s: Unexpected state change %d on "

arch/powerpc/kernel/eeh.c

860

pr_warn("EEH: Failure %d resetting PHB#%x-PE#%x (attempt %d)\n\n",

arch/powerpc/kernel/eeh.c

865

pr_warn("EEH: PHB#%x-PE#%x: Successful reset (attempt %d)\n",

arch/powerpc/kernel/eeh.c

871

pr_warn("EEH: Unrecoverable slot failure on PHB#%x-PE#%x",

arch/powerpc/kernel/eeh.c

879

pr_warn("EEH: PHB#%x-PE#%x: Slot inactive after reset: 0x%x (attempt %d)\n",

arch/powerpc/kernel/eeh.c

978

pr_warn("%s: Failed to register reboot notifier (%d)\n",

arch/powerpc/kernel/eeh.c

985

pr_warn("%s: Failed to register bus notifier (%d)\n",

arch/powerpc/kernel/eeh_cache.c

136

pr_warn("PIAR: overlapping address range\n");

arch/powerpc/kernel/eeh_cache.c

167

pr_warn("PCI: no EEH dev found for %s\n",

arch/powerpc/kernel/eeh_driver.c

1030

pr_warn("%s: Cannot reset, err=%d\n", __func__, rc);

arch/powerpc/kernel/eeh_driver.c

1190

pr_warn("%s: Invalid value %d from next_error()\n",

arch/powerpc/kernel/eeh_driver.c

872

pr_warn("EEH: Frozen PHB#%x-PE#%x is empty!\n",

arch/powerpc/kernel/eeh_driver.c

945

pr_warn("EEH: This PCI device has failed %d times in the last hour and will be permanently disabled after %d failures.\n",

arch/powerpc/kernel/eeh_driver.c

967

pr_warn("EEH: Permanent failure\n");

arch/powerpc/kernel/eeh_driver.c

986

pr_warn("%s: Unable to reset, err=%d\n", __func__, rc);

arch/powerpc/kernel/eeh_pe.c

130

pr_warn("%s: Timeout when getting PE's state (%d)\n",

arch/powerpc/kernel/eeh_pe.c

136

pr_warn("%s: Firmware returned bad wait value %d\n",

arch/powerpc/kernel/eeh_pe.c

140

pr_warn("%s: Firmware returned too long wait value %d\n",

arch/powerpc/kernel/eeh_pe.c

242

pr_warn("%s: Invalid PE %p\n",

arch/powerpc/kernel/eeh_sysfs.c

154

pr_warn("EEH: Unable to create sysfs entries\n");

arch/powerpc/kernel/fadump.c

111

pr_warn("%s: Too less memory to give to CMA\n", __func__);

arch/powerpc/kernel/fadump.c

1300

pr_warn("some reserved ranges are ignored!\n");

arch/powerpc/kernel/fadump.c

1392

pr_warn("Failed to setup kernel metadata!\n");

arch/powerpc/kernel/fadump.c

159

pr_warn("WARNING: Can't use additional parameters area!\n");

arch/powerpc/kernel/fadump.c

173

pr_warn("WARNING: Appending parameters exceeds cmdline size. Truncating!\n");

arch/powerpc/kernel/fadump.c

1786

pr_warn("WARNING: Could not setup area to pass additional parameters!\n");

arch/powerpc/kernel/fadump.c

328

pr_warn("'fadump_reserve_mem=' parameter is deprecated in favor of 'crashkernel=' parameter.\n");

arch/powerpc/kernel/iommu.c

1027

pr_warn("powerpc iommu api: cannot create new group, err=%ld\n",

arch/powerpc/kernel/iommu.c

168

pr_warn("Unable to create IOMMU fault injection sysfs "

arch/powerpc/kernel/iommu.c

822

pr_warn("%s: Unexpected TCEs\n", __func__);

arch/powerpc/kernel/isa-bridge.c

79

pr_warn("ISA: bridge %pOF has non aligned IO range\n", isa_node);

arch/powerpc/kernel/mce.c

315

pr_warn("Failed to identify bad address from "

arch/powerpc/kernel/pci-common.c

1272

pr_warn("PCI: Cannot allocate resource region %d of PCI bridge %d, will remap\n",

arch/powerpc/kernel/prom.c

383

pr_warn("nr_cpu_ids was not a multiple of threads_per_core, adjusted to %d\n",

arch/powerpc/kernel/prom.c

391

pr_warn("Boot CPU %d (core hwid %d) >= nr_cpu_ids, adjusted boot CPU to %d\n",

arch/powerpc/kernel/rtas.c

991

pr_warn("%s not found, using default of %u\n",

arch/powerpc/kernel/rtas.c

997

pr_warn("%s = %u, clamping max error log size to %u\n",

arch/powerpc/kernel/security.c

536

pr_warn("Spectre v2 mitigations not fully under software control, can't disable\n");

arch/powerpc/kernel/secvar-sysfs.c

162

pr_warn("kobject_add error %d for attribute: %s\n", rc,

arch/powerpc/kernel/secvar-sysfs.c

221

pr_warn("Failed to retrieve secvar operations\n");

arch/powerpc/kernel/setup_64.c

653

pr_warn("Argh, can't find dcache properties !\n");

arch/powerpc/kernel/setup_64.c

656

pr_warn("Argh, can't find icache properties !\n");

arch/powerpc/kernel/setup_64.c

863

pr_warn("PERCPU: %s allocator failed (%d), "

arch/powerpc/kernel/stacktrace.c

189

pr_warn("CPU %d didn't respond to backtrace IPI, inspecting paca.\n", cpu);

arch/powerpc/kernel/stacktrace.c

191

pr_warn("paca pointer appears corrupt? (%px)\n", p);

arch/powerpc/kernel/stacktrace.c

195

pr_warn("irq_soft_mask: 0x%02x in_mce: %d in_nmi: %d",

arch/powerpc/kernel/stacktrace.c

204

pr_warn("Back trace of paca->saved_r1 (0x%016llx) (possibly stale):\n", p->saved_r1);

arch/powerpc/kernel/sysfs.c

77

pr_warn("smt-snooze-delay command line option has no effect\n");

arch/powerpc/kernel/time.c

876

pr_warn("time_init: firmware supplied invalid ibm,dec-bits");

arch/powerpc/kernel/watchdog.c

582

pr_warn("could not be initialized");

arch/powerpc/kexec/core.c

101

pr_warn("Crash kernel base must be aligned to 0x%lx\n", PAGE_SIZE);

arch/powerpc/kexec/core.c

131

pr_warn("Crash kernel can not overlap current kernel\n");

arch/powerpc/kexec/file_load_64.c

410

pr_warn("Number of Phdrs %u exceeds max\n", CONFIG_CRASH_MAX_MEMORY_RANGES);

arch/powerpc/kexec/file_load_64.c

412

pr_warn("Configured crash mem ranges may not be enough\n");

arch/powerpc/kvm/book3s_hv.c

6002

pr_warn("kvmppc_set_passthru_irq_hv: Could not assign IRQ map for (%d,%d)\n",

arch/powerpc/kvm/book3s_hv.c

6141

pr_warn("kvmppc_clr_passthru_irq (irq %d, gsi %d) fails: %d\n",

arch/powerpc/kvm/book3s_xics.c

418

pr_warn("icp_deliver_irq: IRQ 0x%06x server 0x%x not found !\n",

arch/powerpc/kvm/book3s_xive.c

1013

pr_warn("%s: Can't find server %d\n", __func__, server);

arch/powerpc/kvm/book3s_xive.c

314

pr_warn("XIVE: Weird guest interrupt number 0x%08x\n", hirq);

arch/powerpc/kvm/book3s_xive.c

69

pr_warn("KVM-XIVE: CPU %d odd ack CPPR, got %d at %d\n",

arch/powerpc/kvm/book3s_xive_native.c

652

pr_warn("Incompatible host page size %lx!\n", page_size);

arch/powerpc/mm/book3s32/mmu.c

215

pr_warn("Some RW data is getting mapped X. "

arch/powerpc/mm/book3s64/hash_pgtable.c

114

pr_warn("Outside the supported range\n");

arch/powerpc/mm/book3s64/hash_utils.c

1091

pr_warn("Kernel not 16M aligned, disabling 16M linear map alignment\n");

arch/powerpc/mm/book3s64/hash_utils.c

1243

pr_warn("Outside the supported range\n");

arch/powerpc/mm/book3s64/hash_utils.c

1270

pr_warn("Hash collision while resizing HPT\n");

arch/powerpc/mm/book3s64/hash_utils.c

1414

pr_warn("Outside the supported range\n");

arch/powerpc/mm/book3s64/radix_pgtable.c

442

pr_warn("Outside the supported range\n");

arch/powerpc/mm/book3s64/radix_pgtable.c

938

pr_warn("Outside the supported range\n");

arch/powerpc/mm/book3s64/radix_pgtable.c

970

pr_warn("Outside the supported range\n");

arch/powerpc/mm/init-common.c

45

pr_warn("Disabling Kernel Userspace Execution Prevention\n");

arch/powerpc/mm/init-common.c

53

pr_warn("Disabling Kernel Userspace Access Protection\n");

arch/powerpc/mm/init_64.c

268

pr_warn("%s: Unable to create vmemmap mapping: %d\n",

arch/powerpc/mm/init_64.c

458

pr_warn("WARNING: Ignoring cmdline option disable_radix\n");

arch/powerpc/mm/init_64.c

634

pr_warn("WARNING: Ignoring cmdline option disable_radix\n");

arch/powerpc/mm/ioremap_32.c

48

pr_warn("%s(): phys addr 0x%llx is RAM lr %ps\n", __func__,

arch/powerpc/mm/ioremap_32.c

71

pr_warn("ioremap() called early from %pS. Use early_ioremap() instead\n", caller);

arch/powerpc/mm/ioremap_64.c

34

pr_warn("ioremap() called early from %pS. Use early_ioremap() instead\n", caller);

arch/powerpc/mm/kasan/init_book3s_64.c

58

pr_warn("KASAN not enabled as it requires radix!");

arch/powerpc/mm/mem.c

108

pr_warn("Unable to remove linear mapping for 0x%llx..0x%llx: %d\n",

arch/powerpc/mm/mem.c

90

pr_warn("Unable to create linear mapping for 0x%llx..0x%llx: %d\n",

arch/powerpc/mm/nohash/kaslr_booke.c

308

pr_warn("KASLR: No safe seed for randomizing the kernel base.\n");

arch/powerpc/mm/numa.c

163

pr_warn("Warning: cpu %lu not found in node %d\n", cpu, node);

arch/powerpc/mm/numa.c

483

pr_warn("short ibm,associativity-reference-points\n");

arch/powerpc/mm/numa.c

500

pr_warn("distance array capped at %d entries\n",

arch/powerpc/mm/numa.c

903

pr_warn("disabled by user\n");

arch/powerpc/mm/pgtable_32.c

159

pr_warn("This platform has HASH MMU, STRICT_MODULE_RWX won't work\n");

arch/powerpc/mm/pgtable_64.c

145

pr_warn("Warning: Unable to mark rodata read only on this CPU.\n");

arch/powerpc/mm/ptdump/ptdump.c

395

pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found\n",

arch/powerpc/perf/core-book3s.c

2592

pr_warn("disabling perf due to pmu_override= command line option.\n");

arch/powerpc/perf/hv-24x7.c

302

pr_warn("desc len not aligned %p", dl_);

arch/powerpc/perf/hv-24x7.c

317

pr_warn("long desc len not aligned %p", ldl_);

arch/powerpc/perf/hv-24x7.c

519

pr_warn("catalog event %u has invalid domain %u\n",

arch/powerpc/perf/hv-24x7.c

708

pr_warn("event %zu fixed portion is not within range\n",

arch/powerpc/perf/hv-24x7.c

721

pr_warn("event %zu has .length=%zu, ends after buffer end: ev_end=%p > end=%p, offset=%zu\n",

arch/powerpc/perf/hv-24x7.c

729

pr_warn("event %zu has a calculated length which exceeds buffer length %zu: event=%p end=%p, offset=%zu\n",

arch/powerpc/perf/hv-24x7.c

736

pr_warn("event %zu exceeds its own length: event=%p, end=%p, offset=%zu, calc_ev_end=%p\n",

arch/powerpc/perf/hv-24x7.c

905

pr_warn("event buffer ended before listed # of events were parsed (got %zu, wanted %zu, junk %zu)\n",

arch/powerpc/perf/hv-24x7.c

952

pr_warn("event %zu (%.*s) creation failure, skipping\n",

arch/powerpc/perf/vpa-dtl.c

343

pr_warn("buffer allocation failed for cpu %d\n", cpu);

arch/powerpc/perf/vpa-dtl.c

452

pr_warn("DTL registration for cpu %d (hw %d) failed with %d\n",

arch/powerpc/platforms/512x/clock-commonclk.c

453

pr_warn("calc rate %d != OF spec %d\n",

arch/powerpc/platforms/512x/mpc512x_shared.c

146

pr_warn("DIU pixclock auto search unsuccessful\n");

arch/powerpc/platforms/512x/mpc512x_shared.c

154

pr_warn("DIU pixclock best effort fallback (backend's choice)\n");

arch/powerpc/platforms/512x/mpc512x_shared.c

372

pr_warn("no %s property in %pOF node, defaulting to %d\n",

arch/powerpc/platforms/52xx/mpc52xx_pic.c

377

pr_warn("%s: Critical IRQ #%d is unsupported! Nopping it.\n",

arch/powerpc/platforms/83xx/km83xx.c

55

pr_warn("%s couldn't find par_io node\n", __func__);

arch/powerpc/platforms/83xx/km83xx.c

61

pr_warn("%s couldn't map par_io registers\n", __func__);

arch/powerpc/platforms/83xx/usb_831x.c

120

pr_warn("831x USB PHY type not supported\n");

arch/powerpc/platforms/83xx/usb_834x.c

60

pr_warn("834x USB PHY type not supported\n");

arch/powerpc/platforms/83xx/usb_834x.c

71

pr_warn("834x USB port0 can't be used by both DR and MPH!\n");

arch/powerpc/platforms/83xx/usb_834x.c

77

pr_warn("834x USB port1 can't be used by both DR and MPH!\n");

arch/powerpc/platforms/83xx/usb_837x.c

35

pr_warn("837x USB PHY type not supported\n");

arch/powerpc/platforms/85xx/socrates_fpga_pic.c

251

pr_warn("FPGA PIC: invalid irq type, setting default active low\n");

arch/powerpc/platforms/85xx/socrates_fpga_pic.c

265

pr_warn("FPGA PIC: invalid irq routing\n");

arch/powerpc/platforms/85xx/socrates_fpga_pic.c

291

pr_warn("FPGA PIC: can't get irq%d\n", i);

arch/powerpc/platforms/86xx/mvme7100.c

69

pr_warn("Unable to map board registers\n");

arch/powerpc/platforms/embedded6xx/mvme5100.c

78

pr_warn("mvme5100_pic_init: couldn't find i8259\n");

arch/powerpc/platforms/embedded6xx/mvme5100.c

84

pr_warn("mvme5100_pic_init: no cascade interrupt?\n");

arch/powerpc/platforms/pasemi/dma_lib.c

522

pr_warn("Can't find I/O Bridge\n");

arch/powerpc/platforms/pasemi/dma_lib.c

531

pr_warn("Can't find DMA controller\n");

arch/powerpc/platforms/pasemi/dma_lib.c

580

pr_warn("Warning: Could not disable RX section\n");

arch/powerpc/platforms/pasemi/dma_lib.c

589

pr_warn("Warning: Could not disable TX section\n");

arch/powerpc/platforms/pasemi/idle.c

69

pr_warn("No cpufreq driver, powersavings modes disabled\n");

arch/powerpc/platforms/pasemi/misc.c

67

pr_warn("pasemi_register_i2c_devices: invalid i2c device entry\n");

arch/powerpc/platforms/powernv/eeh-powernv.c

1072

pr_warn("%s: Failure %lld clearing error injection registers\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

1174

pr_warn("%s: Invalid error type %d\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

1181

pr_warn("%s: Invalid error function %d\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

1188

pr_warn("%s: Firmware doesn't support error injection\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

1197

pr_warn("%s: Failure %lld injecting error "

arch/powerpc/platforms/powernv/eeh-powernv.c

1290

pr_warn("%s: Failed to get HUB#%llx diag-data (%ld)\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

1334

pr_warn("%s: Invalid type of HUB#%llx diag-data (%d)\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

1539

pr_warn("%s: Unexpected error type %d\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

1618

pr_warn("%s: Can't reinit PCI dev 0x%x (%lld)\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

1656

pr_warn("%s: OPAL is required !\n", __func__);

arch/powerpc/platforms/powernv/eeh-powernv.c

477

pr_warn("%s: Invalid option %d\n", __func__, option);

arch/powerpc/platforms/powernv/eeh-powernv.c

490

pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

505

pr_warn("%s: Failure %lld enable %d for PHB#%x-PE#%x\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

522

pr_warn("%s: Failure %lld getting PHB#%x diag-data\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

540

pr_warn("%s: Failure %lld getting PHB#%x state\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

600

pr_warn("%s: Failure %lld getting PHB#%x-PE%x state\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

637

pr_warn("%s: Invalid PHB#%x-PE#%x state %x\n",

arch/powerpc/platforms/powernv/eeh-powernv.c

922

pr_warn("%s: Pending transaction while issuing %sFLR to %04x:%02x:%02x.%01x\n",

arch/powerpc/platforms/powernv/idle.c

1246

pr_warn("cpuidle-powernv: No suitable default stop state found. Disabling platform idle.\n");

arch/powerpc/platforms/powernv/idle.c

1254

pr_warn("cpuidle-powernv: No suitable stop state for CPU-Hotplug. Offlined CPUs will busy wait");

arch/powerpc/platforms/powernv/idle.c

1276

pr_warn("cpuidle-powernv: Disabling idle states that lose full context\n");

arch/powerpc/platforms/powernv/idle.c

1277

pr_warn("cpuidle-powernv: Idle power-savings, CPU-Hotplug affected\n");

arch/powerpc/platforms/powernv/idle.c

1288

pr_warn("cpuidle-powernv: Offlined CPUs will stop with psscr = 0x%016llx\n",

arch/powerpc/platforms/powernv/idle.c

1292

pr_warn("cpuidle-powernv: Offlined CPUs will busy wait\n");

arch/powerpc/platforms/powernv/idle.c

1305

pr_warn("cpuidle-powernv: no idle states found in the DT\n");

arch/powerpc/platforms/powernv/idle.c

1333

pr_warn("opal: PowerMgmt Node not found\n");

arch/powerpc/platforms/powernv/idle.c

1353

pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-flags in DT\n");

arch/powerpc/platforms/powernv/idle.c

1363

pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-latencies-ns in DT\n");

arch/powerpc/platforms/powernv/idle.c

1373

pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-residency-ns in DT\n");

arch/powerpc/platforms/powernv/idle.c

1385

pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-psscr in DT\n");

arch/powerpc/platforms/powernv/idle.c

1395

pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-psscr-mask in DT\n");

arch/powerpc/platforms/powernv/idle.c

1411

pr_warn("cpuidle-powernv: missing ibm,cpu-idle-state-names in DT\n");

arch/powerpc/platforms/powernv/opal-core.c

349

pr_warn("WARNING: Failed to read OPAL base & entry values\n");

arch/powerpc/platforms/powernv/opal-core.c

466

pr_warn("Support missing for this f/w version!\n");

arch/powerpc/platforms/powernv/opal-core.c

506

pr_warn("Supported OPAL metadata version: %u, found: %u!\n",

arch/powerpc/platforms/powernv/opal-core.c

508

pr_warn("WARNING: F/W using newer OPAL metadata format!!\n");

arch/powerpc/platforms/powernv/opal-core.c

514

pr_warn("WARNING: OPAL regions count (%d) adjusted to limit (%d)",

arch/powerpc/platforms/powernv/opal-core.c

535

pr_warn("Supported CPU data version: %u, found: %u!\n",

arch/powerpc/platforms/powernv/opal-core.c

537

pr_warn("WARNING: F/W using newer CPU state data format!!\n");

arch/powerpc/platforms/powernv/opal-dump.c

126

pr_warn("%s: Failed to initiate FSP dump (%d)\n",

arch/powerpc/platforms/powernv/opal-dump.c

231

pr_warn("%s: Failed to get dump info (%d)\n",

arch/powerpc/platforms/powernv/opal-dump.c

278

pr_warn("%s: Extract dump failed for ID 0x%x\n",

arch/powerpc/platforms/powernv/opal-dump.c

429

pr_warn("%s: Failed to create dump kset\n", __func__);

arch/powerpc/platforms/powernv/opal-dump.c

435

pr_warn("%s: Failed to create initiate dump attr group\n",

arch/powerpc/platforms/powernv/opal-dump.c

81

pr_warn("%s: Failed to send ack to Dump ID 0x%x (%d)\n",

arch/powerpc/platforms/powernv/opal-elog.c

316

pr_warn("%s: failed to create elog kset\n", __func__);

arch/powerpc/platforms/powernv/opal-fadump.c

159

pr_warn("Not all memory regions were saved!!!\n");

arch/powerpc/platforms/powernv/opal-fadump.c

160

pr_warn(" Unsaved memory regions:\n");

arch/powerpc/platforms/powernv/opal-fadump.c

163

pr_warn("\t[%03d] base: 0x%llx, size: 0x%llx\n",

arch/powerpc/platforms/powernv/opal-fadump.c

169

pr_warn("If the unsaved regions only contain pages that are filtered out (eg. free/user pages), the vmcore should still be usable.\n");

arch/powerpc/platforms/powernv/opal-fadump.c

170

pr_warn("WARNING: If the unsaved regions contain kernel pages, the vmcore will be corrupted.\n");

arch/powerpc/platforms/powernv/opal-fadump.c

300

pr_warn("%d regions could not be registered for MPIPL as MAX limit is reached!\n",

arch/powerpc/platforms/powernv/opal-fadump.c

365

pr_warn("Could not reset (%llu) kernel metadata tag!\n", ret);

arch/powerpc/platforms/powernv/opal-fadump.c

387

pr_warn("Supported CPU state data version: %u, found: %d!\n",

arch/powerpc/platforms/powernv/opal-fadump.c

390

pr_warn("WARNING: F/W using newer CPU state data format!!\n");

arch/powerpc/platforms/powernv/opal-fadump.c

509

pr_warn("WARNING: appending only crashing CPU's register data\n");

arch/powerpc/platforms/powernv/opal-fadump.c

697

pr_warn("Supported kernel metadata version: %u, found: %d!\n",

arch/powerpc/platforms/powernv/opal-fadump.c

699

pr_warn("WARNING: Kernel metadata format mismatch identified! Core file maybe corrupted..\n");

arch/powerpc/platforms/powernv/opal-flash.c

392

pr_warn("FLASH: Invalid candidate image\n");

arch/powerpc/platforms/powernv/opal-flash.c

401

pr_warn("FLASH: Too large image\n");

arch/powerpc/platforms/powernv/opal-flash.c

405

pr_warn("FLASH: Image is shorter than expected\n");

arch/powerpc/platforms/powernv/opal-flash.c

536

pr_warn("FLASH: opal kobject is not available\n");

arch/powerpc/platforms/powernv/opal-flash.c

543

pr_warn("FLASH: Failed to create sysfs files\n");

arch/powerpc/platforms/powernv/opal-flash.c

549

pr_warn("FLASH: Failed to create sysfs files\n");

arch/powerpc/platforms/powernv/opal-imc.c

254

pr_warn("IMC Device without type property\n");

arch/powerpc/platforms/powernv/opal-imc.c

272

pr_warn("IMC Unknown Device type \n");

arch/powerpc/platforms/powernv/opal-irqchip.c

182

pr_warn("opal: Node not found\n");

arch/powerpc/platforms/powernv/opal-irqchip.c

199

pr_warn("opal: Unable to create irq domain\n");

arch/powerpc/platforms/powernv/opal-irqchip.c

249

pr_warn("Failed to map OPAL irq 0x%x\n", hw_irq);

arch/powerpc/platforms/powernv/opal-irqchip.c

285

pr_warn("Error %d requesting OPAL irq %d\n", rc, (int)r->start);

arch/powerpc/platforms/powernv/opal-msglog.c

114

pr_warn("%s property not found, no message log\n",

arch/powerpc/platforms/powernv/opal-msglog.c

121

pr_warn("memory console address is invalid\n");

arch/powerpc/platforms/powernv/opal-msglog.c

126

pr_warn("memory console version is invalid\n");

arch/powerpc/platforms/powernv/opal-msglog.c

145

pr_warn("OPAL: memcons failed to load from ibm,opal-memcons\n");

arch/powerpc/platforms/powernv/opal-msglog.c

155

pr_warn("OPAL: message log initialisation failed, not creating sysfs entry\n");

arch/powerpc/platforms/powernv/opal-msglog.c

160

pr_warn("OPAL: sysfs file creation failed\n");

arch/powerpc/platforms/powernv/opal-powercap.c

159

pr_warn("Failed to create powercap kobject\n");

arch/powerpc/platforms/powernv/opal-powercap.c

226

pr_warn("Failed to create powercap attribute group %s\n",

arch/powerpc/platforms/powernv/opal-prd.c

248

pr_warn("write: opal_prd_msg returned %d\n", rc);

arch/powerpc/platforms/powernv/opal-psr.c

141

pr_warn("Failed to create psr kobject\n");

arch/powerpc/platforms/powernv/opal-sensor-groups.c

177

pr_warn("Failed to create sensor group kobject\n");

arch/powerpc/platforms/powernv/opal-sensor-groups.c

205

pr_warn("sensor-group-id property not found\n");

arch/powerpc/platforms/powernv/opal-sensor-groups.c

216

pr_warn("Failed to create sensor attribute group %s\n",

arch/powerpc/platforms/powernv/opal-sysparam.c

152

pr_warn("SYSPARAM: opal kobject is not available\n");

arch/powerpc/platforms/powernv/opal-sysparam.c

235

pr_warn("SYSPARAM: Not creating parameter %d as size "

arch/powerpc/platforms/powernv/opal.c

1222

pr_warn("%s: Unable to set nest mmu ptcr\n", __func__);

arch/powerpc/platforms/powernv/opal.c

297

pr_warn("%s: Invalid arguments, msg_type:%d\n",

arch/powerpc/platforms/powernv/opal.c

364

pr_warn("%s: Failed to retrieve opal message, err=%lld\n",

arch/powerpc/platforms/powernv/opal.c

484

pr_warn("atomic console write returned partial "

arch/powerpc/platforms/powernv/opal.c

785

pr_warn("kobject_create_and_add opal failed\n");

arch/powerpc/platforms/powernv/opal.c

847

pr_warn("Unable to add export %pOF/%s, rc = %d!\n",

arch/powerpc/platforms/powernv/opal.c

885

pr_warn("kobject_create_and_add() of exports failed\n");

arch/powerpc/platforms/powernv/opal.c

899

pr_warn("Error %d creating OPAL symbols file\n", rc);

arch/powerpc/platforms/powernv/opal.c

928

pr_warn("DUMP: Failed to register kernel log buffer. "

arch/powerpc/platforms/powernv/opal.c

996

pr_warn("Device node not found\n");

arch/powerpc/platforms/powernv/pci-ioda.c

1029

pr_warn("%s: No DMA for PHB#%x (type %d)\n",

arch/powerpc/platforms/powernv/pci-ioda.c

130

pr_warn("%s: Error %lld unfreezing PHB#%x-PE#%x\n",

arch/powerpc/platforms/powernv/pci-ioda.c

139

pr_warn("%s: Invalid PE %x on PHB#%x\n",

arch/powerpc/platforms/powernv/pci-ioda.c

1675

pr_warn("%s: OPAL error %d setting XIVE %d PE\n",

arch/powerpc/platforms/powernv/pci-ioda.c

1686

pr_warn("%s: OPAL error %d getting 64-bit MSI data\n",

arch/powerpc/platforms/powernv/pci-ioda.c

1698

pr_warn("%s: OPAL error %d getting 32-bit MSI data\n",

arch/powerpc/platforms/powernv/pci-ioda.c

237

pr_warn(" Cannot strip M64 segment for reserved PE#%x\n",

arch/powerpc/platforms/powernv/pci-ioda.c

243

pr_warn(" Failure %lld %s M64 BAR#%d\n",

arch/powerpc/platforms/powernv/pci-ioda.c

2545

pr_warn(" Broken <bus-range> on %pOF\n", np);

arch/powerpc/platforms/powernv/pci-ioda.c

2714

pr_warn(" OPAL Error %ld performing IODA table reset !\n", rc);

arch/powerpc/platforms/powernv/pci-ioda.c

308

pr_warn("%s: Out of memory !\n",

arch/powerpc/platforms/powernv/pci-ioda.c

390

pr_warn("%s: Limiting M64 range to 63 (from %d) on PHB#%x\n",

arch/powerpc/platforms/powernv/pci-ioda.c

396

pr_warn("%s: M64 empty, disabling M64 usage on PHB#%x\n",

arch/powerpc/platforms/powernv/pci-ioda.c

459

pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n",

arch/powerpc/platforms/powernv/pci-ioda.c

473

pr_warn("%s: Failure %lld freezing PHB#%x-PE#%x\n",

arch/powerpc/platforms/powernv/pci-ioda.c

495

pr_warn("%s: Failure %lld clear %d on PHB#%x-PE#%x\n",

arch/powerpc/platforms/powernv/pci-ioda.c

509

pr_warn("%s: Failure %lld clear %d on PHB#%x-PE#%x\n",

arch/powerpc/platforms/powernv/pci-ioda.c

545

pr_warn("%s: Failure %lld getting "

arch/powerpc/platforms/powernv/pci-ioda.c

563

pr_warn("%s: Failure %lld getting "

arch/powerpc/platforms/powernv/pci-ioda.c

888

pr_warn("%s: Not enough PE# available, disabling device\n",

arch/powerpc/platforms/powernv/pci-ioda.c

959

pr_warn("%s: Not enough PE# available for PCI bus %04x:%02x\n",

arch/powerpc/platforms/powernv/pci.c

480

pr_warn("%s: Unrecognized ioType %d\n",

arch/powerpc/platforms/powernv/pci.c

507

pr_warn("%s: Failure %ld clearing frozen "

arch/powerpc/platforms/powernv/pci.c

558

pr_warn("%s: Failure %lld getting PHB#%x-PE#%x state\n",

arch/powerpc/platforms/powernv/rng.c

107

pr_warn("No ibm,chip-id found for %pOF.\n", dn);

arch/powerpc/platforms/powernv/smp.c

110

pr_warn("OPAL Error %ld starting CPU %d\n", rc, nr);

arch/powerpc/platforms/powernv/smp.c

92

pr_warn("OPAL Error %ld querying CPU %d state\n", rc, nr);

arch/powerpc/platforms/ps3/device-init.c

654

pr_warn("%s:%u: device %llu:%llu not found\n",

arch/powerpc/platforms/ps3/device-init.c

852

pr_warn("%s:%u: bad notify_event: event %llu, dev_id %llu, dev_type %llu\n",

arch/powerpc/platforms/ps3/mm.c

600

pr_warn("%s:%d: lv1_put_iopte failed: %s\n",

arch/powerpc/platforms/ps3/os-area.c

686

pr_warn("%s: Could not update FLASH ROM\n", __func__);

arch/powerpc/platforms/ps3/repository.c

126

pr_warn("%s:%d: lv1_read_repository_node failed: %s\n",

arch/powerpc/platforms/ps3/setup.c

199

pr_warn("%s:%d: kobject_create_and_add failed.\n", __func__,

arch/powerpc/platforms/ps3/setup.c

207

pr_warn("%s:%d: sysfs_create_file failed.\n", __func__,

arch/powerpc/platforms/ps3/system-bus.c

124

pr_warn("%s:%d: lv1_gpu_open failed: %s\n", __func__,

arch/powerpc/platforms/ps3/system-bus.c

67

pr_warn("%s:%d: lv1_open_device dev=%u.%u(%s) failed: %s\n",

arch/powerpc/platforms/pseries/eeh_pseries.c

123

pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",

arch/powerpc/platforms/pseries/eeh_pseries.c

136

pr_warn("%s: Failed to get address for PHB#%x-PE#%x\n",

arch/powerpc/platforms/pseries/eeh_pseries.c

230

pr_warn("%s: Unable to configure bridge PHB#%x-PE#%x (%d)\n",

arch/powerpc/platforms/pseries/eeh_pseries.c

718

pr_warn("%s: Failed to allow unfreeze for PHB#%x-PE#%lx, rc=%x\n",

arch/powerpc/platforms/pseries/hotplug-cpu.c

131

pr_warn("CPU %i (hwid %i) didn't die after 120 seconds\n",

arch/powerpc/platforms/pseries/hotplug-cpu.c

140

pr_warn("CPU %i (hwid %i) reported error while dying\n",

arch/powerpc/platforms/pseries/hotplug-cpu.c

274

pr_warn("Reusing free CPU ids %d-%d from another node\n",

arch/powerpc/platforms/pseries/hotplug-cpu.c

360

pr_warn("Unable to remove last online CPU %pOFn\n", dn);

arch/powerpc/platforms/pseries/hotplug-cpu.c

373

pr_warn("Could not find cpu to offline with physical id 0x%x\n",

arch/powerpc/platforms/pseries/hotplug-cpu.c

561

pr_warn("Failed to find CPU root node \"/cpus\"\n");

arch/powerpc/platforms/pseries/hotplug-cpu.c

567

pr_warn("CPU with drc index %x already exists\n", drc_index);

arch/powerpc/platforms/pseries/hotplug-cpu.c

573

pr_warn("Cannot find CPU (drc index %x) to add.\n", drc_index);

arch/powerpc/platforms/pseries/hotplug-cpu.c

579

pr_warn("Failed to acquire DRC, rc: %d, drc index: %x\n",

arch/powerpc/platforms/pseries/hotplug-cpu.c

587

pr_warn("Failed call to configure-connector, drc index: %x\n",

arch/powerpc/platforms/pseries/hotplug-cpu.c

601

pr_warn("Failed to attach node %pOFn, rc: %d, drc index: %x\n",

arch/powerpc/platforms/pseries/hotplug-cpu.c

616

pr_warn("Failed to online cpu %pOFn, rc: %d, drc index: %x\n",

arch/powerpc/platforms/pseries/hotplug-cpu.c

694

pr_warn("Failed to offline CPU %pOFn, rc: %d\n", dn, rc);

arch/powerpc/platforms/pseries/hotplug-cpu.c

700

pr_warn("Failed to release drc (%x) for CPU %pOFn, rc: %d\n",

arch/powerpc/platforms/pseries/hotplug-cpu.c

710

pr_warn("Failed to detach CPU %pOFn, rc: %d", dn, rc);

arch/powerpc/platforms/pseries/hotplug-cpu.c

748

pr_warn("Cannot find CPU (drc index %x) to remove\n",

arch/powerpc/platforms/pseries/iommu.c

1058

pr_warn("%pOF: failed to remove DMA window property: %d\n",

arch/powerpc/platforms/pseries/iommu.c

956

pr_warn("%pOF failed to clear tces in window.\n",

arch/powerpc/platforms/pseries/iommu.c

972

pr_warn("%pOF: failed to remove DMA window: rtas returned "

arch/powerpc/platforms/pseries/lpar.c

101

pr_warn("Stolen time statistics will be unreliable\n");

arch/powerpc/platforms/pseries/lpar.c

1096

pr_warn("Unexpected empty call to H_BLOCK_REMOVE");

arch/powerpc/platforms/pseries/lpar.c

1494

pr_warn("%s too large returned buffer %d", __func__, len);

arch/powerpc/platforms/pseries/lpar.c

1655

pr_warn("Unexpected error %d cancelling timed out HPT resize\n",

arch/powerpc/platforms/pseries/lpar.c

1669

pr_warn("Invalid argument from H_RESIZE_HPT_PREPARE\n");

arch/powerpc/platforms/pseries/lpar.c

1672

pr_warn("Operation not permitted from H_RESIZE_HPT_PREPARE\n");

arch/powerpc/platforms/pseries/lpar.c

1675

pr_warn("Unexpected error %d from H_RESIZE_HPT_PREPARE\n", rc);

arch/powerpc/platforms/pseries/lpar.c

1692

pr_warn("Unexpected error %d from H_RESIZE_HPT_COMMIT\n",

arch/powerpc/platforms/pseries/lpar.c

98

pr_warn("Failed to allocate dispatch trace log for cpu %d\n",

arch/powerpc/platforms/pseries/mobility.c

330

pr_warn("Failed lookup: phandle 0x%x for action 0x%x\n",

arch/powerpc/platforms/pseries/papr_platform_attributes.c

115

pr_warn("hcall failed: H_GET_ENERGY_SCALE_INFO");

arch/powerpc/platforms/pseries/papr_platform_attributes.c

283

pr_warn("hcall failed: H_GET_ENERGY_SCALE_INFO, ret: %d\n", ret);

arch/powerpc/platforms/pseries/papr_platform_attributes.c

304

pr_warn("kobject_create_and_add papr failed\n");

arch/powerpc/platforms/pseries/papr_platform_attributes.c

310

pr_warn("kobject_create_and_add energy_scale_info failed\n");

arch/powerpc/platforms/pseries/papr_platform_attributes.c

338

pr_warn("Failed to create papr attribute group %s\n",

arch/powerpc/platforms/pseries/plpks.c

188

pr_warn("Password already set - authenticated operations will fail\n");

arch/powerpc/platforms/pseries/rtas-fadump.c

463

pr_warn("Region type: %u src addr: 0x%llx dest addr: 0x%llx\n",

arch/powerpc/platforms/pseries/rtas-fadump.c

473

pr_warn("Failed to process additional parameters! Proceeding anyway..\n");

arch/powerpc/platforms/pseries/rtas-fadump.c

483

pr_warn("Unknown region found: type: %u src addr: 0x%llx dest addr: 0x%llx\n",

arch/powerpc/platforms/pseries/rtas-fadump.c

89

pr_warn("Section type %d unsupported on this kernel. Ignoring!\n", type);

arch/powerpc/platforms/pseries/setup.c

347

pr_warn("Failed to create dispatch trace log buffer cache\n");

arch/powerpc/platforms/pseries/setup.c

348

pr_warn("Stolen time statistics will be unreliable\n");

arch/powerpc/platforms/pseries/setup.c

412

pr_warn("Unable to enable relocation"

arch/powerpc/platforms/pseries/setup.c

423

pr_warn("Warning: Giving up waiting to enable "

arch/powerpc/platforms/pseries/setup.c

447

pr_warn("Warning: Failed to disable relocation on exceptions: %ld\n",

arch/powerpc/platforms/pseries/vio.c

1355

pr_warn("%s: parent(%pOF) of %pOFn not recognized.\n",

arch/powerpc/platforms/pseries/vio.c

1364

pr_warn("%s: could not determine the parent of node %pOFn.\n",

arch/powerpc/platforms/pseries/vio.c

1380

pr_warn("%s: allocation failure for VIO device.\n", __func__);

arch/powerpc/platforms/pseries/vio.c

1391

pr_warn("%s: node %pOFn is missing the 'device_type' "

arch/powerpc/platforms/pseries/vio.c

1398

pr_warn("%s: node %pOFn missing 'reg'\n",

arch/powerpc/sysdev/fsl_msi.c

514

pr_warn("%s: %pOF: msi available range of %u at %u is not IRQ-aligned\n",

arch/powerpc/sysdev/fsl_pci.c

345

pr_warn("%pOF: msi-address-64 address of %llx is "

arch/powerpc/sysdev/fsl_pci.c

454

pr_warn("%pOF: WARNING: Outbound window cfg leaves "

arch/powerpc/sysdev/fsl_pci.c

538

pr_warn("%pOF: disabled\n", dev);

arch/powerpc/sysdev/fsl_pci.c

822

pr_warn("%pOF: disabled by the firmware.\n",

arch/powerpc/sysdev/fsl_rcpm.c

100

pr_warn("Unknown cpu PM state (%d)\n", state);

arch/powerpc/sysdev/fsl_rcpm.c

125

pr_warn("Unknown cpu PM state (%d)\n", state);

arch/powerpc/sysdev/fsl_rcpm.c

177

pr_warn("Unknown cpu PM state (%d)\n", state);

arch/powerpc/sysdev/fsl_rcpm.c

207

pr_warn("Unknown cpu PM state (%d)\n", state);

arch/powerpc/sysdev/fsl_rcpm.c

236

pr_warn("Unknown platform PM state (%d)", state);

arch/powerpc/sysdev/fsl_rcpm.c

267

pr_warn("Unknown platform PM state (%d)\n", state);

arch/powerpc/sysdev/mpic.c

1014

pr_warn("mpic: Mapping of source 0x%x failed, source protected by firmware !\n",

arch/powerpc/sysdev/mpic.c

1045

pr_warn("mpic: Mapping of source 0x%x failed, source out of range !\n",

arch/powerpc/sysdev/xics/icp-native.c

221

pr_warn("icp_native: Could not reserve ICP MMIO for CPU %d, interrupt server #0x%x\n",

arch/powerpc/sysdev/xics/icp-native.c

229

pr_warn("icp_native: Failed ioremap for CPU %d, interrupt server #0x%x, addr %#lx\n",

arch/powerpc/sysdev/xics/ics-native.c

111

pr_warn("%s: No online cpus in the mask %*pb for irq %d\n",

arch/powerpc/sysdev/xics/ics-native.c

209

pr_warn("ICS %pOFP has %d ranges, only one supported\n",

arch/powerpc/sysdev/xics/ics-opal.c

117

pr_warn("%s: No online cpus in the mask %*pb for irq %d\n",

arch/powerpc/sysdev/xics/ics-rtas.c

121

pr_warn("%s: No online cpus in the mask %*pb for irq %d\n",

arch/powerpc/sysdev/xics/xics-common.c

241

pr_warn("IRQ %u affinity broken off cpu %u\n",

arch/powerpc/sysdev/xics/xics-common.c

518

pr_warn("XICS: Cannot find a Presentation Controller !\n");

arch/powerpc/sysdev/xics/xics-common.c

535

pr_warn("XICS: Cannot find a Source Controller !\n");

arch/powerpc/sysdev/xive/common.c

647

pr_warn("irq %d started with broken affinity\n", d->irq);

arch/powerpc/sysdev/xive/common.c

807

pr_warn("Interrupt %d (HW 0x%x) type mismatch, Linux says %s, FW says %s\n",

arch/powerpc/sysdev/xive/native.c

710

pr_warn("OPAL error %lld freeing VP block\n", rc);

arch/powerpc/sysdev/xive/spapr.c

801

pr_warn("WARNING: Ignoring cmdline option xive=off\n");

arch/powerpc/sysdev/xive/spapr.c

804

pr_warn("%s: Unknown xive support option: 0x%x\n",

arch/riscv/kernel/acpi.c

242

pr_warn(FW_BUG "requested region covers multiple EFI memory regions\n");

arch/riscv/kernel/acpi.c

266

pr_warn(FW_BUG "requested region covers kernel memory\n");

arch/riscv/kernel/cpu-hotplug.c

62

pr_warn("CPU%u may not have stopped: %d\n", cpu, ret);

arch/riscv/kernel/cpu.c

101

pr_warn("CPU with hartid=%lu has no \"riscv,isa-base\" or \"riscv,isa\" property\n",

arch/riscv/kernel/cpu.c

107

pr_warn("CPU with hartid=%lu does not support rv32ima", *hart);

arch/riscv/kernel/cpu.c

112

pr_warn("CPU with hartid=%lu does not support rv64ima", *hart);

arch/riscv/kernel/cpu.c

131

pr_warn("Found CPU without hart ID\n");

arch/riscv/kernel/cpu.c

36

pr_warn("Found CPU without hart ID\n");

arch/riscv/kernel/cpu.c

55

pr_warn("Found incompatible CPU\n");

arch/riscv/kernel/cpu.c

61

pr_warn("Found CPU without hart ID\n");

arch/riscv/kernel/cpu.c

72

pr_warn("CPU with hartid=%lu does not support rv32i", *hart);

arch/riscv/kernel/cpu.c

77

pr_warn("CPU with hartid=%lu does not support rv64i", *hart);

arch/riscv/kernel/cpu.c

87

pr_warn("CPU with hartid=%lu does not support ima", *hart);

arch/riscv/kernel/cpu.c

95

pr_warn("CPU with hartid=%lu is invalid: this kernel does not parse \"riscv,isa\"",

arch/riscv/kernel/cpufeature.c

1034

pr_warn("Unable to find cpu node\n");

arch/riscv/kernel/cpufeature.c

1082

pr_warn("Unsupported heterogeneous vlenb detected, vector extension disabled.\n");

arch/riscv/kernel/cpufeature.c

1176

pr_warn("Zicboz disabled as it is unavailable on some harts\n");

arch/riscv/kernel/cpufeature.c

1181

pr_warn("Zicbom disabled as it is unavailable on some harts\n");

arch/riscv/kernel/cpufeature.c

1185

pr_warn("Zicbop disabled as it is unavailable on some harts\n");

arch/riscv/kernel/cpufeature.c

859

pr_warn("Unable to find cpu node\n");

arch/riscv/kernel/cpufeature.c

866

pr_warn("Unable to find \"riscv,isa\" devicetree entry\n");

arch/riscv/kernel/cpufeature.c

872

pr_warn("Unable to get ISA for the hart - %d\n", cpu);

arch/riscv/kernel/cpufeature.c

996

pr_warn("Unable to find cpu node\n");

arch/riscv/kernel/module.c

803

pr_warn("%s: Unknown symbol %s\n",

arch/riscv/kernel/paravirt.c

57

pr_warn("Failed to disable steal-time shmem");

arch/riscv/kernel/paravirt.c

59

pr_warn("Failed to set steal-time shmem");

arch/riscv/kernel/probes/kprobes.c

211

pr_warn("Failed to recover from reentered kprobes.\n");

arch/riscv/kernel/sbi.c

156

pr_warn("Timer extension is not available in SBI v%lu.%lu\n",

arch/riscv/kernel/sbi.c

162

pr_warn("IPI extension is not available in SBI v%lu.%lu\n",

arch/riscv/kernel/sbi.c

170

pr_warn("remote fence extension is not available in SBI v%lu.%lu\n",

arch/riscv/kernel/sbi.c

43

pr_warn("Unable to send any request to hartid > BITS_PER_LONG for SBI v0.1\n");

arch/riscv/kernel/sbi.c

515

pr_warn("%s: type=0x%lx reason=0x%lx failed\n",

arch/riscv/kernel/smp.c

165

pr_warn("CPU%d: unhandled IPI%d\n", cpu, ipi);

arch/riscv/kernel/smp.c

275

pr_warn("SMP: failed to stop secondary CPUs %*pbl\n",

arch/riscv/kernel/smp.c

327

pr_warn("SMP: failed to stop secondary CPUs %*pbl\n",

arch/riscv/kernel/smpboot.c

105

pr_warn("NR_CPUS is too small for the number of ACPI tables.\n");

arch/riscv/kernel/smpboot.c

143

pr_warn("Invalid cpuid [%d] for hartid [%lu]\n",

arch/riscv/kernel/smpboot.c

156

pr_warn("Total number of cpus [%d] is greater than nr_cpus option value [%d]\n",

arch/riscv/kernel/smpboot.c

94

pr_warn("Invalid hartid\n");

arch/riscv/kernel/unaligned_access_speed.c

145

pr_warn("Allocation failure, not measuring misaligned performance\n");

arch/riscv/kernel/unaligned_access_speed.c

156

pr_warn("Allocation failure, not measuring misaligned performance\n");

arch/riscv/kernel/unaligned_access_speed.c

258

pr_warn("Allocation failure, not measuring misaligned performance\n");

arch/riscv/kernel/unaligned_access_speed.c

299

pr_warn("Allocation failure, not measuring vector misaligned performance\n");

arch/riscv/kernel/unaligned_access_speed.c

356

pr_warn("cpu%d: rdtime lacks granularity needed to measure unaligned vector access speed\n",

arch/riscv/kernel/unaligned_access_speed.c

461

pr_warn("vector support is not available, ignoring unaligned_vector_speed=%s\n",

arch/riscv/kernel/unaligned_access_speed.c

480

pr_warn("Failed to create vec_unalign_check kthread\n");

arch/riscv/kernel/unaligned_access_speed.c

98

pr_warn("cpu%d: rdtime lacks granularity needed to measure unaligned access speed\n",

arch/riscv/kvm/nacl.c

40

pr_warn("KVM: No free entry in NACL shared memory\n");

arch/riscv/kvm/vcpu_pmu.c

214

pr_warn("%s: should be invoked for only RV32\n", __func__);

arch/riscv/kvm/vcpu_pmu.c

219

pr_warn("Invalid counter id [%ld]during read\n", cidx);

arch/riscv/kvm/vcpu_pmu.c

246

pr_warn("Invalid counter id [%ld] during read\n", cidx);

arch/riscv/kvm/vcpu_pmu.c

560

pr_warn("Unable to read snapshot shared memory while starting counters\n");

arch/riscv/mm/cacheflush.c

137

pr_warn("%s mismatched between harts %lu and %lu\n",

arch/riscv/mm/init.c

1247

pr_warn("fixmap btmap start [%08lx] != end [%08lx]\n",

arch/riscv/mm/init.c

1249

pr_warn("fix_to_virt(FIX_BTMAP_BEGIN): %08lx\n",

arch/riscv/mm/init.c

1251

pr_warn("fix_to_virt(FIX_BTMAP_END): %08lx\n",

arch/riscv/mm/init.c

1254

pr_warn("FIX_BTMAP_END: %d\n", FIX_BTMAP_END);

arch/riscv/mm/init.c

1255

pr_warn("FIX_BTMAP_BEGIN: %d\n", FIX_BTMAP_BEGIN);

arch/riscv/mm/init.c

268

pr_warn("Physical memory overflows the linear mapping size: region above %pa removed",

arch/riscv/mm/ptdump.c

402

pr_warn("Checked W+X mappings: failed, %lu W+X pages found\n",

arch/s390/kernel/cpcmd.c

98

pr_warn("The cpcmd kernel function failed to allocate a response buffer\n");

arch/s390/kernel/debug.c

1536

pr_warn("%s is not a valid level for a debug feature\n", str);

arch/s390/kernel/debug.c

812

pr_warn("Root becomes the owner of all s390dbf files in sysfs\n");

arch/s390/kernel/hiperdispatch.c

414

pr_warn("Unable to create hiperdispatch attribute group\n");

arch/s390/kernel/hiperdispatch.c

425

pr_warn("Failed to register s390.hiperdispatch sysctl attribute\n");

arch/s390/kernel/perf_cpum_cf.c

1176

pr_warn("CPU[%i] MT counter data was lost\n",

arch/s390/kernel/perf_cpum_sf.c

780

pr_warn("CPU Measurement Facility sampling is temporarily not available\n");

arch/s390/kernel/uv.c

69

pr_warn("Failed to reserve %lu bytes for ultravisor base storage\n",

arch/s390/kernel/wti.c

184

pr_warn("Couldn't request external interrupt 0x1007\n");

arch/s390/kernel/wti.c

190

pr_warn("Failed to register warning track interrupt through DIAG 49C\n");

arch/s390/kvm/kvm-s390.c

5736

pr_warn("failed to commit memory region\n");

arch/s390/mm/dump_pagetables.c

213

pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found\n", st.wx_pages);

arch/s390/mm/extmem.c

194

pr_warn("Querying a DCSS type failed with rc=%ld\n", vmrc);

arch/s390/mm/extmem.c

361

pr_warn("Loading DCSS %s failed with rc=%ld\n", name, end_addr);

arch/s390/mm/extmem.c

477

pr_warn("DCSS %s is in use and cannot be reloaded\n", name);

arch/s390/mm/extmem.c

490

pr_warn("DCSS %s overlaps with used memory resources and cannot be reloaded\n",

arch/s390/mm/extmem.c

509

pr_warn("Reloading DCSS %s failed with rc=%ld\n",

arch/s390/pci/pci.c

688

pr_warn("UID checking was active but no UID is provided: switching to automatic domain allocation\n");

arch/s390/pci/pci_bus.c

432

pr_warn("Adding PCI function %08x failed because the configured limit of %d is reached\n",

arch/sh/boards/mach-sdk7786/nmi.c

40

pr_warn("Unknown NMI mode %s\n", str);

arch/sh/drivers/pci/fixups-sdk7786.c

56

pr_warn("Unreachable card detected in slot#3\n");

arch/sh/drivers/pci/pci.c

122

pr_warn("registering PCI controller with io_map_base unset\n");

arch/sh/drivers/pci/pci.c

146

pr_warn("Skipping PCI bus scan due to resource conflict\n");

arch/sh/drivers/platform_early.c

243

pr_warn("%s: unable to parse %s parameter\n",

arch/sh/drivers/platform_early.c

275

pr_warn("%s: unable to probe %s early.\n",

arch/sh/kernel/io_trapped.c

102

pr_warn("unable to install trapped io filter\n");

arch/sh/kernel/setup.c

345

pr_warn("generic_mode_pins(): missing mode pin configuration\n");

arch/sh/mm/consistent.c

46

pr_warn("%s: unable to find empty space for resource\n", name);

arch/sh/mm/consistent.c

56

pr_warn("%s: unable to allocate memory\n", name);

arch/sparc/kernel/adi_64.c

109

pr_warn("WARNING: ADI tag size >4 on this platform. Disabling AADI support\n");

arch/sparc/kernel/irq_64.c

296

pr_warn("IRQ pre handler NOT supported.\n");

arch/sparc/kernel/leon_kernel.c

443

pr_warn("GPTIMER uses shared irqs, using other timers of the same core will fail.\n");

arch/sparc/kernel/nmi.c

293

pr_warn("NMI watchdog cannot be enabled or disabled\n");

arch/sparc/kernel/prom_64.c

399

pr_warn("CPU node missing reg property\n");

arch/sparc/kernel/prom_64.c

412

pr_warn("CPU node missing cpu ID property\n");

arch/sparc/kernel/smp_64.c

1543

pr_warn("PERCPU: %s allocator failed (%d), "

arch/sparc/mm/init_64.c

1347

pr_warn("Returning default NUMA distance value for %d->%d\n",

arch/sparc/mm/init_64.c

3076

pr_warn("Failed to allocate source.\n");

arch/sparc/mm/init_64.c

3086

pr_warn("Resource insertion failed.\n");

arch/sparc/vdso/vma.c

328

pr_warn("Cannot allocate vdso\n");

arch/um/drivers/ubd_kern.c

193

pr_warn("The fake_ide option has been removed\n");

arch/um/drivers/ubd_kern.c

242

pr_warn("fake major not supported any more\n");

arch/x86/coco/sev/core.c

1881

pr_warn("AES-GSM buffers must be in linear mapping");

arch/x86/coco/sev/core.c

629

pr_warn("Failed to stop shared<->private conversions\n");

arch/x86/coco/tdx/tdx.c

1023

pr_warn("Failed to stop shared<->private conversions\n");

arch/x86/coco/tdx/tdx.c

269

pr_warn("%s\n", msg);

arch/x86/coco/tdx/tdx.c

823

pr_warn("Unexpected #VE: %lld\n", ve->exit_reason);

arch/x86/coco/tdx/tdx.c

857

pr_warn("Unexpected #VE: %lld\n", ve->exit_reason);

arch/x86/entry/vdso/vdso32-setup.c

36

pr_warn("vdso32 values other than 0 and 1 are no longer allowed; vdso disabled\n");

arch/x86/events/amd/ibs.c

1700

pr_warn("perf: IBS APIC setup failed on cpu #%d\n",

arch/x86/events/amd/iommu.c

451

pr_warn("Error initializing IOMMU %d.\n", idx);

arch/x86/events/amd/power.c

288

pr_warn("AMD Power PMU registration failed\n");

arch/x86/events/core.c

2257

pr_warn("Failed to register hybrid PMUs\n");

arch/x86/events/intel/core.c

2841

pr_warn("Failed to disable the event with invalid index %d\n",

arch/x86/events/intel/core.c

3327

pr_warn("Failed to enable the event with invalid index %d\n",

arch/x86/events/intel/core.c

3823

pr_warn("The extra reg idx %d is not supported.\n", idx);

arch/x86/events/intel/core.c

5829

pr_warn("Unsupported dynamic constraint type %d\n", i);

arch/x86/events/intel/core.c

6420

pr_warn("PEBS disabled due to CPU errata\n");

arch/x86/events/intel/core.c

6574

pr_warn("CPUID marked event: \'%s\' unavailable\n",

arch/x86/events/intel/p6.c

244

pr_warn("Userspace RDPMC support disabled due to a CPU erratum\n");

arch/x86/events/intel/pt.c

1852

pr_warn("PT is enabled at boot time, doing nothing\n");

arch/x86/events/intel/pt.c

1862

pr_warn("ToPA output is not supported on this CPU\n");

arch/x86/events/intel/uncore_discovery.c

638

pr_warn("Uncore type %d id %d: Cannot find box control address.\n",

arch/x86/events/intel/uncore_discovery.c

644

pr_warn("Uncore type %d box %d: Invalid box control address.\n",

arch/x86/events/intel/uncore_discovery.c

652

pr_warn("Uncore type %d box %d: ioremap error for 0x%llx.\n",

arch/x86/events/intel/uncore_discovery.c

67

pr_warn("Unsupported access type %d\n", unit->access_type);

arch/x86/events/intel/uncore_snb.c

1554

pr_warn("perf uncore: Cannot find matched IMC device.\n");

arch/x86/events/intel/uncore_snb.c

1560

pr_warn("perf uncore: BAR 0x%x is disabled. Failed to map %s counters.\n",

arch/x86/events/intel/uncore_snb.c

1576

pr_warn("perf uncore: Failed to ioremap for %s.\n", type->name);

arch/x86/events/intel/uncore_snb.c

904

pr_warn("perf uncore: Failed to ioremap for %s.\n", type->name);

arch/x86/events/intel/uncore_snbep.c

5024

pr_warn("perf uncore: Failed to ioremap for %s.\n", type->name);

arch/x86/events/intel/uncore_snbep.c

6910

pr_warn("perf uncore: Failed to ioremap for %s.\n", type->name);

arch/x86/events/rapl.c

930

pr_warn("power-core PMU initialization failed (%d)\n", ret);

arch/x86/events/rapl.c

940

pr_warn("power-core PMU registration failed (%d)\n", ret);

arch/x86/events/rapl.c

950

pr_warn("Initialization failed (%d), disabled\n", ret);

arch/x86/events/zhaoxin/core.c

500

pr_warn("CPUID marked event: \'%s\' unavailable\n",

arch/x86/hyperv/hv_init.c

235

pr_warn("reenlightenment support is unavailable\n");

arch/x86/hyperv/ivm.c

213

pr_warn("Fail to write msr via ghcb %llx.\n", msr);

arch/x86/hyperv/ivm.c

242

pr_warn("Fail to read msr via ghcb %llx.\n", msr);

arch/x86/hyperv/ivm.c

629

pr_warn("Failed to stop shared<->private conversions\n");

arch/x86/kernel/acpi/boot.c

1330

pr_warn("No APIC-table, disabling MPS\n");

arch/x86/kernel/acpi/boot.c

139

pr_warn("Unable to map MADT\n");

arch/x86/kernel/acpi/boot.c

1622

pr_warn("acpi=force override\n");

arch/x86/kernel/acpi/boot.c

1624

pr_warn("Disabling ACPI support\n");

arch/x86/kernel/acpi/boot.c

1753

pr_warn("MPS support code is not built-in, using acpi=off or acpi=noirq or pci=noacpi may have problem\n");

arch/x86/kernel/acpi/boot.c

224

pr_warn("x2apic entry ignored\n");

arch/x86/kernel/acpi/boot.c

230

pr_warn("x2apic entry ignored\n");

arch/x86/kernel/acpi/boot.c

343

pr_warn("NMI not connected to LINT 1!\n");

arch/x86/kernel/acpi/boot.c

361

pr_warn("NMI not connected to LINT 1!\n");

arch/x86/kernel/acpi/boot.c

380

pr_warn("Invalid bus_irq %u for legacy override\n", bus_irq);

arch/x86/kernel/acpi/boot.c

448

pr_warn("Failed to find ioapic for gsi : %u\n", gsi);

arch/x86/kernel/acpi/boot.c

552

pr_warn("BIOS IRQ0 override ignored.\n");

arch/x86/kernel/acpi/boot.c

559

pr_warn("BIOS IRQ0 pin2 override: forcing polarity to high active.\n");

arch/x86/kernel/acpi/boot.c

635

pr_warn("setting ELCR to %04x (from %04x)\n", new, old);

arch/x86/kernel/acpi/boot.c

902

pr_warn("HPET timers must be located in memory.\n");

arch/x86/kernel/acpi/boot.c

914

pr_warn("HPET id: %#x base: %#lx is invalid\n", hpet_tbl->id, hpet_address);

arch/x86/kernel/acpi/boot.c

925

pr_warn("HPET id: %#x base: 0xfed0000000000000 is bogus, try hpet=force on the kernel command line to fix it up to 0xfed00000.\n",

arch/x86/kernel/acpi/boot.c

930

pr_warn("HPET id: %#x base: 0xfed0000000000000 fixed up to 0xfed00000.\n",

arch/x86/kernel/acpi/cppc.c

103

pr_warn("Could not retrieve nominal performance\n");

arch/x86/kernel/acpi/cppc.c

278

pr_warn("Undefined core type found for cpu %d\n", cpu);

arch/x86/kernel/acpi/cppc.c

91

pr_warn("Could not retrieve perf counters (%d)\n", rc);

arch/x86/kernel/acpi/cppc.c

97

pr_warn("Could not retrieve highest performance (%d)\n", rc);

arch/x86/kernel/acpi/cstate.c

144

pr_warn(FW_BUG "ACPI MWAIT C-state 0x%x not supported by HW (0x%x)\n",

arch/x86/kernel/acpi/madt_wakeup.c

235

pr_warn("Failed to setup MADT reset vector\n");

arch/x86/kernel/amd_gart_64.c

511

pr_warn("PCI-DMA: Warning: Small IOMMU %luMB."

arch/x86/kernel/amd_gart_64.c

669

pr_warn("PCI-DMA: More than 4GB of RAM and no IOMMU - falling back to iommu=soft.\n");

arch/x86/kernel/amd_gart_64.c

738

pr_warn("More than 4GB of memory but GART IOMMU not available.\n");

arch/x86/kernel/amd_gart_64.c

739

pr_warn("falling back to iommu=soft.\n");

arch/x86/kernel/amd_node.c

105

pr_warn("Error programming SMN address 0x%x.\n", address);

arch/x86/kernel/apic/apic.c

1033

pr_warn("Spurious LAPIC timer interrupt on cpu %d\n",

arch/x86/kernel/apic/apic.c

1488

pr_warn("APIC: Stale ISR: %256pb\n", ir.map);

arch/x86/kernel/apic/apic.c

1494

pr_warn("APIC: Stale IRR: %256pb\n", ir.map);

arch/x86/kernel/apic/apic.c

1746

pr_warn("Apicid: %08x, cannot enforce nox2apic\n",

arch/x86/kernel/apic/apic.c

1751

pr_warn("APIC locked in x2apic mode, can't disable\n");

arch/x86/kernel/apic/apic.c

1754

pr_warn("x2apic already enabled.\n");

arch/x86/kernel/apic/apic.c

1774

pr_warn("x2apic lock mismatch between BSP and AP.\n");

arch/x86/kernel/apic/apic.c

1800

pr_warn("Cannot disable locked x2apic, id: %08x\n", x2apic_id);

arch/x86/kernel/apic/apic.c

1965

pr_warn("Could not enable APIC!\n");

arch/x86/kernel/apic/apic.c

2647

pr_warn("APIC Verbosity level %s not recognised"

arch/x86/kernel/apic/apic.c

2688

pr_warn("Unknown external NMI delivery mode `%s' ignored\n", arg);

arch/x86/kernel/apic/apic.c

713

pr_warn("APIC calibration not consistent with PM-Timer: %ldms instead of 100ms\n",

arch/x86/kernel/apic/apic.c

915

pr_warn("APIC frequency too slow, disabling apic timer\n");

arch/x86/kernel/apic/apic.c

959

pr_warn("APIC timer disabled due to verification failure\n");

arch/x86/kernel/apic/io_apic.c

1308

pr_warn("ExtINT not setup in hardware but reported by MP table\n");

arch/x86/kernel/apic/io_apic.c

1315

pr_warn("ExtINT in hardware and MP table differ\n");

arch/x86/kernel/apic/io_apic.c

2393

pr_warn("IOAPIC[%d]: Invalid apic_id %d, trying %d\n",

arch/x86/kernel/apic/io_apic.c

2408

pr_warn("IOAPIC[%d]: apic_id %d already used, trying %d\n", ioapic, apic_id, i);

arch/x86/kernel/apic/io_apic.c

2650

pr_warn("I/O APIC 0x%x registers return all ones, skipping!\n",

arch/x86/kernel/apic/io_apic.c

2682

pr_warn("Bogus (zero) I/O APIC address found, skipping!\n");

arch/x86/kernel/apic/io_apic.c

2688

pr_warn("address 0x%x conflicts with IOAPIC%d\n", address, ioapic);

arch/x86/kernel/apic/io_apic.c

2695

pr_warn("Max # of I/O APICs (%d) exceeded (found %d), skipping\n",

arch/x86/kernel/apic/io_apic.c

2725

pr_warn("GSI range [%u-%u] for new IOAPIC conflicts with GSI[%u-%u]\n",

arch/x86/kernel/apic/io_apic.c

2779

pr_warn("can't find IOAPIC for GSI %d\n", gsi_base);

arch/x86/kernel/apic/io_apic.c

2791

pr_warn("pin%d on IOAPIC%d is still in use.\n", pin, ioapic);

arch/x86/kernel/apic/io_apic.c

690

pr_warn("IOAPIC: Invalid polarity: 2, defaulting to low\n");

arch/x86/kernel/apic/io_apic.c

727

pr_warn("IOAPIC: Invalid srcbus: %d defaulting to level\n", bus);

arch/x86/kernel/apic/io_apic.c

757

pr_warn("IOAPIC: Invalid trigger mode 2 defaulting to level\n");

arch/x86/kernel/apic/vector.c

1122

pr_warn("IRQ %u schedule cleanup for offline CPU %u\n", apicd->irq, cpu);

arch/x86/kernel/apic/vector.c

1169

pr_warn("CPU %u has %u vectors, %u available. Cannot disable CPU\n",

arch/x86/kernel/apic/vector.c

1176

pr_warn("Reserved vectors %u > available %u. IRQ request may fail\n",

arch/x86/kernel/apic/vector.c

430

pr_warn("irq %u: Affinity broken due to vector space exhaustion.\n",

arch/x86/kernel/apic/vector.c

991

pr_warn("IRQ fixup: irq %d move in progress, old vector %d\n",

arch/x86/kernel/apic/x2apic_uv_x.c

1119

pr_warn("UV: unable to determine platform RTC clock frequency, guessing.\n");

arch/x86/kernel/cpu/amd.c

431

pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n");

arch/x86/kernel/cpu/amd_cache_disable.c

166

pr_warn("L3 slot %d in use/index already disabled!\n",

arch/x86/kernel/cpu/aperfmperf.c

466

pr_warn("Scheduler frequency invariance went wobbly, disabling!\n");

arch/x86/kernel/cpu/bugs.c

2265

pr_warn(SPECTRE_V2_IBRS_PERF_MSG);

arch/x86/kernel/cpu/bugs.c

2814

pr_warn("Kernel not compiled for PAE. No mitigation for L1TF\n");

arch/x86/kernel/cpu/bugs.c

2821

pr_warn("System has more than MAX_PA/2 memory. L1TF mitigation not effective.\n");

arch/x86/kernel/cpu/bugs.c

2929

pr_warn("IBPB-extending microcode not applied!\n");

arch/x86/kernel/cpu/bugs.c

2930

pr_warn(SRSO_NOTICE);

arch/x86/kernel/cpu/bugs.c

964

pr_warn("Mitigation locked. Disable failed.\n");

arch/x86/kernel/cpu/bugs.c

991

pr_warn("Microcode update needed! Disabling AVX as mitigation.\n");

arch/x86/kernel/cpu/bus_lock.c

407

pr_warn("No splitlock CPU offline handler\n");

arch/x86/kernel/cpu/common.c

1458

pr_warn("x86/CPU: Running old microcode\n");

arch/x86/kernel/cpu/common.c

1665

pr_warn("setcpuid: force-enabling CPU feature flag:");

arch/x86/kernel/cpu/common.c

1668

pr_warn("clearcpuid: force-disabling CPU feature flag:");

arch/x86/kernel/cpu/common.c

1705

pr_warn("setcpuid: force-enabling CPU %s flag: %s\n",

arch/x86/kernel/cpu/common.c

1709

pr_warn("clearcpuid: force-disabling CPU %s flag: %s\n",

arch/x86/kernel/cpu/common.c

1719

pr_warn("%s: unknown CPU flag: %s", set ? "setcpuid" : "clearcpuid", opt);

arch/x86/kernel/cpu/common.c

1774

pr_warn("!!! setcpuid=/clearcpuid= in use, this is for TESTING ONLY, may break things horribly. Tainting kernel.\n");

arch/x86/kernel/cpu/common.c

2561

pr_warn("x86/CPU: CPU features have changed after loading microcode, but might not take effect.\n");

arch/x86/kernel/cpu/common.c

2562

pr_warn("x86/CPU: Please consider either early loading through initrd/built-in or a potential BIOS update.\n");

arch/x86/kernel/cpu/common.c

715

pr_warn("CPU: CPU feature %s disabled, no CPUID level 0x%x\n",

arch/x86/kernel/cpu/hygon.c

103

pr_warn(FW_BUG "TSC doesn't count with P0 frequency!\n");

arch/x86/kernel/cpu/intel.c

214

pr_warn("Intel Spectre v2 broken microcode detected; disabling Speculation Control\n");

arch/x86/kernel/cpu/intel.c

235

pr_warn("Atom PSE erratum detected, BIOS microcode update recommended\n");

arch/x86/kernel/cpu/intel.c

423

pr_warn("PAE forced!\n");

arch/x86/kernel/cpu/mce/amd.c

339

pr_warn("Failed to read MCA_IPID for bank %d\n", bank);

arch/x86/kernel/cpu/mce/core.c

1879

pr_warn("CPU%d: Using only %u machine check banks out of %u\n",

arch/x86/kernel/cpu/mce/core.c

2331

pr_warn(FW_BUG

arch/x86/kernel/cpu/mce/inject.c

757

pr_warn("Platform does not allow *hardware* error injection."

arch/x86/kernel/cpu/microcode/amd.c

1297

pr_warn("AMD CPU family 0x%x not supported\n", c->x86);

arch/x86/kernel/cpu/microcode/core.c

650

pr_warn("%u offline siblings did not respond.\n",

arch/x86/kernel/cpu/microcode/intel.c

246

pr_warn("Bad extended signature table checksum, aborting.\n");

arch/x86/kernel/cpu/mshyperv.c

357

pr_warn("x86/hyperv: HYPERCALL MSR not available.\n");

arch/x86/kernel/cpu/mshyperv.c

361

pr_warn("x86/hyperv: VP_INDEX MSR not available.\n");

arch/x86/kernel/cpu/mshyperv.c

606

pr_warn("Hyper-V: Invariant TSC is unavailable\n");

arch/x86/kernel/cpu/mtrr/centaur.c

98

pr_warn("mtrr: only write-combining%s supported\n",

arch/x86/kernel/cpu/mtrr/cleanup.c

86

pr_warn(BIOS_BUG_MSG, i);

arch/x86/kernel/cpu/mtrr/cleanup.c

954

pr_warn("WARNING: BIOS bug: CPU MTRRs don't cover all of memory, losing %lluMB of RAM.\n",

arch/x86/kernel/cpu/mtrr/generic.c

1032

pr_warn("mtrr: base(0x%lx000) is not 4 MiB aligned\n", base);

arch/x86/kernel/cpu/mtrr/generic.c

1038

pr_warn("mtrr: writable mtrr between 0x70000000 and 0x7003FFFF may hang the CPU.\n");

arch/x86/kernel/cpu/mtrr/generic.c

1052

pr_warn("mtrr: base(0x%lx000) is not aligned on a size(0x%lx000) boundary\n", base, size);

arch/x86/kernel/cpu/mtrr/generic.c

471

pr_warn("Trying to overwrite MTRR state with %u variable entries\n",

arch/x86/kernel/cpu/mtrr/generic.c

736

pr_warn("mtrr: your CPUs had inconsistent fixed MTRR settings\n");

arch/x86/kernel/cpu/mtrr/generic.c

738

pr_warn("mtrr: your CPUs had inconsistent variable MTRR settings\n");

arch/x86/kernel/cpu/mtrr/generic.c

740

pr_warn("mtrr: your CPUs had inconsistent MTRRdefType settings\n");

arch/x86/kernel/cpu/mtrr/generic.c

841

pr_warn("mtrr: your BIOS has configured an incorrect mask, fixing it.\n");

arch/x86/kernel/cpu/mtrr/mtrr.c

233

pr_warn("type: %u invalid\n", type);

arch/x86/kernel/cpu/mtrr/mtrr.c

239

pr_warn("your processor doesn't support write-combining\n");

arch/x86/kernel/cpu/mtrr/mtrr.c

244

pr_warn("zero sized request\n");

arch/x86/kernel/cpu/mtrr/mtrr.c

250

pr_warn("base or size exceeds the MTRR width\n");

arch/x86/kernel/cpu/mtrr/mtrr.c

281

pr_warn("0x%lx000,0x%lx000 overlaps existing 0x%lx000,0x%lx000\n", base, size, lbase,

arch/x86/kernel/cpu/mtrr/mtrr.c

289

pr_warn("type mismatch for %lx000,%lx000 old: %s new: %s\n",

arch/x86/kernel/cpu/mtrr/mtrr.c

327

pr_warn("size and base must be multiples of 4 kiB\n");

arch/x86/kernel/cpu/mtrr/mtrr.c

424

pr_warn("register: %d too big\n", reg);

arch/x86/kernel/cpu/mtrr/mtrr.c

429

pr_warn("MTRR %d not used\n", reg);

arch/x86/kernel/cpu/mtrr/mtrr.c

433

pr_warn("reg: %d has count=0\n", reg);

arch/x86/kernel/cpu/mtrr/mtrr.c

492

pr_warn("Failed to add WC MTRR for [%p-%p]; performance may suffer.",

arch/x86/kernel/cpu/resctrl/core.c

629

pr_warn("Can't find control domain for id=%d for CPU %d for resource %s\n",

arch/x86/kernel/cpu/resctrl/core.c

672

pr_warn("Can't find monitor domain for id=%d for CPU %d for resource %s\n",

arch/x86/kernel/cpu/resctrl/intel_aet.c

172

pr_warn("Bad package %u in guid 0x%x\n", tr->plat_info.package_id,

arch/x86/kernel/cpu/resctrl/intel_aet.c

177

pr_warn("MMIO space wrong size (%zu bytes) for guid 0x%x. Expected %zu bytes.\n",

arch/x86/kernel/cpu/resctrl/intel_aet.c

289

pr_warn("Unknown PMT feature name '%s'\n", pfname);

arch/x86/kernel/cpu/resctrl/monitor.c

383

pr_warn("CoD enabled system? Resctrl not supported\n");

arch/x86/kernel/cpu/resctrl/monitor.c

397

pr_warn("Ignore improbable SNC node count %d\n", ret);

arch/x86/kernel/cpu/resctrl/monitor.c

422

pr_warn("Ignoring impossible MBM counter offset\n");

arch/x86/kernel/cpu/sgx/encl.c

202

pr_warn("PCMD page not empty after truncate.\n");

arch/x86/kernel/cpu/sgx/main.c

830

pr_warn(FW_BUG "Unable to map EPC section to online node. Fallback to the NUMA node 0.\n");

arch/x86/kernel/cpu/topology.c

176

pr_warn("Enumerated BSP APIC %x is not marked in APICBASE MSR\n", apic_id);

arch/x86/kernel/cpu/topology.c

177

pr_warn("Assuming crash kernel. Limiting to one CPU to prevent machine INIT\n");

arch/x86/kernel/cpu/topology.c

182

pr_warn("Boot CPU APIC ID not the first enumerated APIC ID: %x != %x\n",

arch/x86/kernel/cpu/topology.c

194

pr_warn("Crash kernel detected. Disabling real BSP to prevent machine INIT\n");

arch/x86/kernel/cpu/topology.c

200

pr_warn(FW_BUG "APIC enumeration order not specification compliant\n");

arch/x86/kernel/cpu/topology.c

484

pr_warn("%u possible CPUs exceed the limit of %u\n", total, allowed);

arch/x86/kernel/cpu/vmware.c

431

pr_warn("Failed to get TSC freq from the hypervisor\n");

arch/x86/kernel/devicetree.c

138

pr_warn("%pOF: missing local APIC ID\n", dn);

arch/x86/kernel/e820.c

917

pr_warn("mem=nopentium ignored! (only supported on x86_32)\n");

arch/x86/kernel/fpu/bugs.c

60

pr_warn("Hmm, FPU with FDIV bug\n");

arch/x86/kernel/fpu/xstate.c

470

pr_warn("CPUID[%02x, %02x]: eax=%08x ebx=%08x ecx=%08x edx=%08x\n",

arch/x86/kernel/fpu/xstate.c

933

pr_warn("x86/fpu: init_fpstate buffer too small (%zu < %d)\n",

arch/x86/kernel/ftrace.c

516

pr_warn("Expected E8, got %x\n", call.opcode);

arch/x86/kernel/hpet.c

1043

pr_warn("Disabling HPET.\n");

arch/x86/kernel/hpet.c

1055

pr_warn("Global config: Unknown bits %#x\n", cfg);

arch/x86/kernel/hpet.c

1073

pr_warn("Channel #%u config: Unknown bits %#x\n", i, cfg);

arch/x86/kernel/hpet.c

1413

pr_warn("Lost %d RTC interrupts\n", lost_ints);

arch/x86/kernel/hpet.c

885

pr_warn("Config register invalid. Disabling HPET\n");

arch/x86/kernel/hpet.c

910

pr_warn("Counter not counting. HPET disabled\n");

arch/x86/kernel/hpet.c

979

pr_warn("HPET force enabled via command line, but dysfunctional in PC10.\n");

arch/x86/kernel/kvmclock.c

218

pr_warn("%s: failed to alloc %d pages", __func__, (1U << order));

arch/x86/kernel/kvmclock.c

234

pr_warn("kvmclock: set_memory_decrypted() failed. Disabling\n");

arch/x86/kernel/module.c

174

pr_warn("x86/modules: Invalid relocation target, existing value does not match expected value for sec %u, idx %u, type %d, loc %lx, val %llx\n",

arch/x86/kernel/mpparse.c

101

pr_warn("Unknown bustype %s - ignoring\n", str);

arch/x86/kernel/mpparse.c

82

pr_warn("MP table busid value (%d) for bustype %s is too large, max. supported is %d\n",

arch/x86/kernel/msr.c

101

pr_warn("Write to unrecognized MSR 0x%x by %s (pid: %d), tainting CPU_OUT_OF_SPEC.\n",

arch/x86/kernel/msr.c

103

pr_warn("See https://git.kernel.org/pub/scm/linux/kernel/git/tip/tip.git/about for details.\n");

arch/x86/kernel/pci-dma.c

144

pr_warn("forcesac option ignored.\n");

arch/x86/kernel/pci-dma.c

146

pr_warn("allowdac option ignored.\n");

arch/x86/kernel/pci-dma.c

148

pr_warn("nodac option ignored.\n");

arch/x86/kernel/setup.c

407

pr_warn("setup: failed to memremap ima_setup_data entry\n");

arch/x86/kernel/setup.c

419

pr_warn("Passed IMA kexec data, but CONFIG_IMA not set. Ignoring.\n");

arch/x86/kernel/setup.c

463

pr_warn("Passed KHO data, but CONFIG_KEXEC_HANDOVER not set. Ignoring.\n");

arch/x86/kernel/setup.c

469

pr_warn("setup: failed to memremap kho data (0x%llx, 0x%llx)\n",

arch/x86/kernel/setup.c

579

pr_warn("setup: failed to memremap setup_data entry\n");

arch/x86/kernel/setup.c

593

pr_warn("setup: failed to memremap indirect setup_data\n");

arch/x86/kernel/setup.c

791

pr_warn(".text .data .bss are not marked as E820_TYPE_RAM!\n");

arch/x86/kernel/setup_percpu.c

153

pr_warn("%s allocator failed (%d), falling back to page size\n",

arch/x86/kernel/sys_x86_64.c

76

pr_warn("invalid option value: 'align_va_addr=%s'\n", str);

arch/x86/kernel/tboot.c

300

pr_warn("unsupported sleep state 0x%x\n", sleep_state);

arch/x86/kernel/tboot.c

313

pr_warn("tboot is not able to suspend on platforms with reduced hardware sleep (ACPIv5)");

arch/x86/kernel/tboot.c

331

pr_warn("tboot wait for APs timeout\n");

arch/x86/kernel/tboot.c

54

pr_warn("tboot at 0x%llx is invalid\n", boot_params.tboot_addr);

arch/x86/kernel/tboot.c

59

pr_warn("tboot version is invalid: %u\n", tboot->version);

arch/x86/kernel/tboot.c

85

pr_warn("non-0 tboot_addr but it is not of type E820_TYPE_RESERVED\n");

arch/x86/kernel/time.c

107

pr_warn("clocksource %s registered with invalid mask %016llx for VDSO. Disabling VDSO support.\n",

arch/x86/kernel/tsc.c

1374

pr_warn("Warning: TSC freq calibrated by CPUID/MSR differs from what is calibrated by HW timer, please check with vendor!!\n");

arch/x86/kernel/tsc.c

872

pr_warn("Unable to calibrate against PIT\n");

arch/x86/kernel/tsc.c

882

pr_warn("HPET/PMTIMER calibration failed\n");

arch/x86/kernel/tsc.c

901

pr_warn("HPET/PMTIMER calibration failed. Using PIT calibration.\n");

arch/x86/kernel/tsc.c

910

pr_warn("PIT calibration deviates from %s: %lu %lu\n",

arch/x86/kernel/tsc_sync.c

144

pr_warn(FW_BUG "TSC ADJUST: CPU%u: %lld force to 0\n",

arch/x86/kernel/tsc_sync.c

399

pr_warn("TSC synchronization [CPU#%d -> CPU#%u]:\n",

arch/x86/kernel/tsc_sync.c

401

pr_warn("Measured %Ld cycles TSC warp between CPUs, "

arch/x86/kernel/tsc_sync.c

404

pr_warn("TSC warped randomly between CPUs\n");

arch/x86/kernel/tsc_sync.c

519

pr_warn("TSC ADJUST compensate: CPU%u observed %lld warp. Adjust: %lld\n",

arch/x86/kernel/tsc_sync.c

77

pr_warn(FW_BUG "TSC ADJUST differs: CPU%u %lld --> %lld. Restoring\n",

arch/x86/kvm/svm/avic.c

1244

pr_warn(FW_BUG "Cannot enable x2AVIC, AVIC is unsupported\n");

arch/x86/kvm/svm/avic.c

1250

pr_warn("AVIC disabled: missing HvInUseWrAllowed on SNP-enabled system\n");

arch/x86/kvm/svm/avic.c

1260

pr_warn("AVIC unsupported in CPUID but force enabled, your system might crash and burn\n");

arch/x86/kvm/svm/sev.c

2189

pr_warn("Failed to create SEV-SNP context, rc %d fw_error %d",

arch/x86/kvm/vmx/tdx.c

1870

pr_warn("Guest access before accepting 0x%llx on vCPU %d\n",

arch/x86/lib/msr.c

16

pr_warn("%s: error allocating msrs\n", __func__);

arch/x86/mm/extable.c

170

pr_warn("unchecked MSR access error: WRMSR to 0x%x (tried to write 0x%08x%08x) at rIP: 0x%lx (%pS)\n",

arch/x86/mm/extable.c

177

pr_warn("unchecked MSR access error: RDMSR from 0x%x at rIP: 0x%lx (%pS)\n",

arch/x86/mm/init.c

646

pr_warn("Failed to release memory for alloc_low_pages()");

arch/x86/mm/init_32.c

450

pr_warn("try to clear pte for ram above max_low_pfn: pfn: %lx pmd: %p pmd phys: %lx, but pmd is big page and is not using pte !\n",

arch/x86/mm/ioremap.c

312

pr_warn("caller %pS mapping multiple BARs\n", caller);

arch/x86/mm/ioremap.c

660

pr_warn("failed to remap setup_data entry\n");

arch/x86/mm/ioremap.c

688

pr_warn("failed to remap indirect setup_data\n");

arch/x86/mm/kmmio.c

202

pr_warn("double-arm: addr 0x%08lx, ref %d, old %d\n",

arch/x86/mm/kmmio.c

345

pr_warn("unexpected debug trap on CPU %d.\n", smp_processor_id());

arch/x86/mm/mem_encrypt_amd.c

563

pr_warn("failed to free unused decrypted pages\n");

arch/x86/mm/mmio-mod.c

395

pr_warn("multiple CPUs still online, may miss events.\n");

arch/x86/mm/mmio-mod.c

419

pr_warn("multiple CPUs are online, may miss events. "

arch/x86/mm/pat/memtype.c

859

pr_warn("x86/PAT: %s:%d map pfn RAM range req %s for [mem %#010Lx-%#010Lx], got %s\n",

arch/x86/mm/pat/set_memory.c

2271

pr_warn("Could not invalidate pfn=0x%lx from 1:1 map\n", pfn);

arch/x86/mm/pat/set_memory.c

605

pr_warn("CPA %8s %10s: 0x%016lx - 0x%016lx PFN %lx req %016llx prevent %016llx\n",

arch/x86/mm/testmmiotrace.c

130

pr_warn("WARNING: mapping %lu kB @ 0x%08lx in PCI address space, "

arch/x86/pci/acpi.c

544

pr_warn("pci_bus %04x:%02x: ignored (multiple domains not supported)\n",

arch/x86/pci/mmconfig-shared.c

567

pr_warn("ECAM %pR conflicts with %s %pR\n",

arch/x86/pci/mmconfig-shared.c

652

pr_warn("no memory for MCFG entries\n");

arch/x86/platform/efi/efi.c

260

pr_warn("mem%02u: %s range=[0x%016llx-0x%llx%016llx] (invalid)\n",

arch/x86/platform/efi/efi.c

264

pr_warn("mem%02u: %s range=[0x%016llx-0x%016llx] (invalid)\n",

arch/x86/platform/efi/efi.c

298

pr_warn("Removing %d invalid memory map entries.\n", n_removal);

arch/x86/platform/efi/efi_64.c

302

pr_warn("Error mapping PA 0x%llx -> VA 0x%llx!\n",

arch/x86/platform/efi/efi_64.c

345

pr_warn(FW_WARN "VA address range overflow!\n");

arch/x86/platform/olpc/olpc-xo15-sci.c

43

pr_warn(PFX "failed to set lid behavior\n");

arch/x86/platform/scx200/scx200_32.c

85

pr_warn("Configuration Block not found\n");

arch/x86/platform/uv/uv_nmi.c

1033

pr_warn("UV: NMI handler failed to register\n");

arch/x86/platform/uv/uv_nmi.c

1036

pr_warn("UV: PING NMI handler failed to register\n");

arch/x86/power/cpu.c

352

pr_warn("CPU0 is offline.\n");

arch/x86/tools/insn_decoder_test.c

157

pr_warn("Found an x86 instruction decoder bug, "

arch/x86/tools/insn_decoder_test.c

159

pr_warn("%s", line);

arch/x86/tools/insn_decoder_test.c

160

pr_warn("objdump says %d bytes, but insn_get_length() "

arch/x86/tools/insn_decoder_test.c

167

pr_warn("Decoded and checked %d instructions with %d "

arch/x86/virt/svm/sev.c

1036

pr_warn("Leaking PFN range 0x%llx-0x%llx\n", pfn, pfn + npages);

arch/x86/virt/svm/sev.c

953

pr_warn("Failed to split direct map for PFN 0x%llx, ret: %d\n",

arch/x86/virt/vmx/tdx/tdx.c

416

pr_warn("initialization failed: TDMRs exhausted.\n");

arch/x86/virt/vmx/tdx/tdx.c

437

pr_warn("consumed TDMRs reaching limit: %d used out of %d\n",

arch/x86/virt/vmx/tdx/tdx.c

500

pr_warn("TDMR [0x%llx, 0x%llx): unable to find local NUMA node for PAMT allocation, fallback to use node 0.\n",

arch/x86/virt/vmx/tdx/tdx.c

707

pr_warn("initialization failed: TDMR [0x%llx, 0x%llx): reserved areas exhausted.\n",

arch/x86/xen/enlighten.c

376

pr_warn("Unable to pin on physical cpu %d. In case of problems consider vcpu pinning.\n",

arch/x86/xen/enlighten.c

386

pr_warn("Physical cpu %d not available for pinning. Check Xen cpu configuration.\n",

arch/x86/xen/platform-pci-unplug.c

205

pr_warn("unrecognised option '%s' "

arch/x86/xen/platform-pci-unplug.c

54

pr_warn("Xen Platform PCI: unknown I/O protocol version\n");

arch/x86/xen/setup.c

370

pr_warn("Unable to find available pfn range, not remapping identity pages\n");

arch/xtensa/kernel/hw_breakpoint.c

32

pr_warn("unknown slot type: %d\n", type);

arch/xtensa/kernel/s32c1i_selftest.c

121

pr_warn("Processor configuration lacks atomic compare-and-swap support!\n");

arch/xtensa/kernel/s32c1i_selftest.c

99

pr_warn("S32C1I took exception %d, %d\n", cause1, cause2);

arch/xtensa/kernel/setup.c

147

pr_warn("Invalid boot parameters!\n");

arch/xtensa/kernel/setup.c

163

pr_warn("Ignoring tag 0x%08x\n", tag->id);

arch/xtensa/kernel/time.c

158

pr_warn("%s: CPU input clock not found\n",

arch/xtensa/kernel/time.c

162

pr_warn("%s: CPU node not found in the device tree\n",

arch/xtensa/mm/init.c

161

pr_warn("Unrecognized memmap syntax: %s\n", p);

arch/xtensa/platforms/iss/network.c

145

pr_warn("%s: assigning a globally valid ethernet address\n",

block/bdev.c

1378

pr_warn("Invalid option string for bdev_allow_write_mounted:"

block/blk-cgroup.c

1780

pr_warn("blkcg_policy_register: BLKCG_MAX_POLS too small\n");

block/blk-core.c

538

pr_warn("Trying to write to read-only block-device %pg\n",

block/blk-crypto-profile.c

457

pr_warn("Integrity and hardware inline encryption are not supported together. Disabling hardware inline encryption.\n");

block/blk-ia-ranges.c

210

pr_warn("Invalid non-contiguous independent access ranges\n");

block/blk-ia-ranges.c

224

pr_warn("Independent access ranges do not match disk capacity\n");

block/blk-iocost.c

1963

pr_warn("iocg: invalid donation weights in ");

block/blk-mq.c

4588

pr_warn("Allocate new hctx on node %d fails, fallback to previous one on node %d\n",

block/blk-mq.c

5179

pr_warn("Increasing nr_hw_queues to %d fails, fallback to %d\n",

block/blk-settings.c

146

pr_warn("invalid PI settings.\n");

block/blk-settings.c

154

pr_warn("integrity support disabled.\n");

block/blk-settings.c

160

pr_warn("ref tag not support without checksum.\n");

block/blk-settings.c

165

pr_warn("pi_offset (%u) + pi_tuple_size (%u) exceeds metadata_size (%u)\n",

block/blk-settings.c

173

pr_warn("pi_tuple_size must be 0 when checksum type is none\n");

block/blk-settings.c

180

pr_warn("pi_tuple_size mismatch for T10 PI: expected %zu, got %u\n",

block/blk-settings.c

188

pr_warn("pi_tuple_size mismatch for CRC64 PI: expected %zu, got %u\n",

block/blk-settings.c

200

pr_warn("invalid interval_exp %u\n", bi->interval_exp);

block/blk-settings.c

367

pr_warn("Invalid logical block size (%d)\n", lim->logical_block_size);

block/blk-settings.c

373

pr_warn("Invalid physical block size (%d)\n", lim->physical_block_size);

block/blk-settings.c

571

pr_warn("blk-integrity: Integrity and hardware inline encryption are not supported together.\n");

block/blk-zoned.c

1961

pr_warn("%s: Invalid number of conventional zones %u / %u\n",

block/blk-zoned.c

2040

pr_warn("%s: Invalid zone condition 0x%X\n",

block/blk-zoned.c

2050

pr_warn("%s: Invalid zone condition 0x%x for type 0x%x\n",

block/blk-zoned.c

2062

pr_warn("%s: Invalid conventional zone capacity\n",

block/blk-zoned.c

2093

pr_warn("%s: Invalid variable zone capacity\n",

block/blk-zoned.c

2133

pr_warn("%s: Zone gap at sectors %llu..%llu\n",

block/blk-zoned.c

2139

pr_warn("%s: Invalid zone start %llu, length %llu\n",

block/blk-zoned.c

2150

pr_warn("%s: Invalid zoned device with non constant zone size\n",

block/blk-zoned.c

2155

pr_warn("%s: Invalid zoned device with larger last zone size\n",

block/blk-zoned.c

2161

pr_warn("%s: Invalid zone capacity\n",

block/blk-zoned.c

2181

pr_warn("%s: Invalid zone type 0x%x at sectors %llu\n",

block/blk-zoned.c

2229

pr_warn("%s: Invalid non power of two zone size (%llu)\n",

block/blk-zoned.c

2247

pr_warn("%s: No zones reported\n", disk->disk_name);

block/blk-zoned.c

2257

pr_warn("%s: Missing zones from sector %llu\n",

block/blk-zoned.c

2265

pr_warn("%s: failed to revalidate zones\n", disk->disk_name);

block/disk-events.c

441

pr_warn("%s: failed to initialize events\n", disk->disk_name);

block/elevator.c

600

pr_warn("elv: switch to \"%s\" failed, falling back to \"none\"\n",

block/elevator.c

756

pr_warn("\"%s\" elevator initialization, failed %d, falling back to \"none\"\n",

block/elevator.c

771

pr_warn("%s: set none elevator failed %d\n", __func__, err);

block/elevator.c

890

pr_warn("Kernel parameter elevator= does not have any effect anymore.\n"

block/partitions/aix.c

273

pr_warn("partition %s (%u pp's found) is "

block/partitions/amiga.c

133

pr_warn("Dev %s: cylblk %u > rdb_CylBlocks %u!\n",

block/partitions/amiga.c

164

pr_warn("Dev %s: partition %u (%llu-%llu) needs 64 bit device support!\n",

block/partitions/cmdline.c

131

pr_warn("cmdline partition has no block device.");

block/partitions/cmdline.c

150

pr_warn("cmdline partition has no valid partition.");

block/partitions/cmdline.c

202

pr_warn("cmdline partition has no valid partition.");

block/partitions/cmdline.c

314

pr_warn("Overlapping partitions are used in command line partitions.");

block/partitions/cmdline.c

315

pr_warn("Don't use filesystems on overlapping partitions:");

block/partitions/cmdline.c

334

pr_warn("%s[%llu,%llu] overlaps with "

block/partitions/cmdline.c

59

pr_warn("cmdline partition size is invalid.");

block/partitions/cmdline.c

77

pr_warn("cmdline partition format is invalid.");

block/partitions/core.c

315

pr_warn("%s: partitions not supported on host managed zoned block device\n",

block/partitions/core.c

611

pr_warn("%s: ignoring partition table on host managed zoned block device\n",

block/partitions/efi.c

486

pr_warn("GPT:Primary header LBA != Alt. header alternate_lba\n");

block/partitions/efi.c

487

pr_warn("GPT:%lld != %lld\n",

block/partitions/efi.c

493

pr_warn("GPT:Primary header alternate_lba != Alt. header my_lba\n");

block/partitions/efi.c

494

pr_warn("GPT:%lld != %lld\n",

block/partitions/efi.c

501

pr_warn("GPT:first_usable_lbas don't match.\n");

block/partitions/efi.c

502

pr_warn("GPT:%lld != %lld\n",

block/partitions/efi.c

509

pr_warn("GPT:last_usable_lbas don't match.\n");

block/partitions/efi.c

510

pr_warn("GPT:%lld != %lld\n",

block/partitions/efi.c

516

pr_warn("GPT:disk_guids don't match.\n");

block/partitions/efi.c

521

pr_warn("GPT:num_partition_entries don't match: "

block/partitions/efi.c

529

pr_warn("GPT:sizeof_partition_entry values don't match: "

block/partitions/efi.c

537

pr_warn("GPT:partition_entry_array_crc32 values don't match: "

block/partitions/efi.c

544

pr_warn("GPT:Primary header thinks Alt. header is not at the end of the disk.\n");

block/partitions/efi.c

545

pr_warn("GPT:%lld != %lld\n",

block/partitions/efi.c

552

pr_warn("GPT:Alternate GPT header not at the end of the disk.\n");

block/partitions/efi.c

553

pr_warn("GPT:%lld != %lld\n",

block/partitions/efi.c

560

pr_warn("GPT: Use GNU Parted to correct GPT errors.\n");

block/partitions/efi.c

646

pr_warn("Alternate GPT is invalid, using primary GPT.\n");

block/partitions/efi.c

654

pr_warn("Primary GPT is invalid, using alternate GPT.\n");

block/sed-opal.c

3032

pr_warn("error updating SED key: %d\n", ret);

certs/blacklist.c

197

pr_warn("Duplicate blacklisted hash %s\n", hash);

crypto/adiantum.c

618

pr_warn("Unsupported Adiantum instantiation: (%s,%s)\n",

crypto/asymmetric_keys/pkcs7_parser.c

121

pr_warn("Inconsistently supplied authAttrs\n");

crypto/asymmetric_keys/pkcs7_parser.c

346

pr_warn("Only support pkcs7_signedData type\n");

crypto/asymmetric_keys/pkcs7_parser.c

383

pr_warn("Unsupported SignedData version\n");

crypto/asymmetric_keys/pkcs7_parser.c

423

pr_warn("Unsupported SignerInfo version\n");

crypto/asymmetric_keys/pkcs7_parser.c

426

pr_warn("SignedData-SignerInfo version mismatch\n");

crypto/asymmetric_keys/pkcs7_parser.c

499

pr_warn("Unsupported data type %d\n", ctx->last_oid);

crypto/asymmetric_keys/pkcs7_parser.c

544

pr_warn("Mismatch between global data type (%d) and sinfo %u (%d)\n",

crypto/asymmetric_keys/pkcs7_parser.c

573

pr_warn("S/MIME Caps only allowed with Authenticode\n");

crypto/asymmetric_keys/pkcs7_parser.c

593

pr_warn("Authenticode AuthAttrs only allowed with Authenticode\n");

crypto/asymmetric_keys/pkcs7_parser.c

604

pr_warn("Repeated/multivalue AuthAttrs not permitted\n");

crypto/asymmetric_keys/pkcs7_parser.c

620

pr_warn("Missing required AuthAttr\n");

crypto/asymmetric_keys/pkcs7_parser.c

626

pr_warn("Unexpected Authenticode AuthAttr\n");

crypto/asymmetric_keys/pkcs7_parser.c

707

pr_warn("Authenticode requires AuthAttrs\n");

crypto/asymmetric_keys/pkcs7_verify.c

298

pr_warn("Sig %u: X.509 chain contains auth-skid nonmatch (%u->%u)\n",

crypto/asymmetric_keys/pkcs7_verify.c

305

pr_warn("Sig %u: X.509 chain contains loop\n",

crypto/asymmetric_keys/pkcs7_verify.c

366

pr_warn("Message signed outside of X.509 validity window\n");

crypto/asymmetric_keys/pkcs7_verify.c

424

pr_warn("Invalid module sig (not pkcs7-data)\n");

crypto/asymmetric_keys/pkcs7_verify.c

434

pr_warn("Invalid module sig (has authattrs)\n");

crypto/asymmetric_keys/pkcs7_verify.c

440

pr_warn("Invalid firmware sig (not pkcs7-data)\n");

crypto/asymmetric_keys/pkcs7_verify.c

444

pr_warn("Invalid firmware sig (missing authattrs)\n");

crypto/asymmetric_keys/pkcs7_verify.c

450

pr_warn("Invalid kexec sig (not Authenticode)\n");

crypto/asymmetric_keys/pkcs7_verify.c

458

pr_warn("Invalid unspecified sig (not pkcs7-data)\n");

crypto/asymmetric_keys/pkcs7_verify.c

506

pr_warn("Data already supplied\n");

crypto/asymmetric_keys/pkcs7_verify.c

84

pr_warn("Sig %u: No messageDigest\n", sinfo->index);

crypto/asymmetric_keys/pkcs7_verify.c

90

pr_warn("Sig %u: Invalid digest size (%u)\n",

crypto/asymmetric_keys/pkcs7_verify.c

98

pr_warn("Sig %u: Message digest doesn't match\n",

crypto/asymmetric_keys/pkcs8_parser.c

58

pr_warn("Unsupported PKCS#8 version\n");

crypto/asymmetric_keys/verify_pefile.c

130

pr_warn("Signature wrapper too short\n");

crypto/asymmetric_keys/verify_pefile.c

145

pr_warn("Signature wrapper bigger than sig len (%x > %x)\n",

crypto/asymmetric_keys/verify_pefile.c

150

pr_warn("Signature is not revision 2.0\n");

crypto/asymmetric_keys/verify_pefile.c

154

pr_warn("Signature certificate type is not PKCS\n");

crypto/asymmetric_keys/verify_pefile.c

167

pr_warn("Signature data missing\n");

crypto/asymmetric_keys/verify_pefile.c

201

pr_warn("Signature data not PKCS#7\n");

crypto/asymmetric_keys/verify_pefile.c

344

pr_warn("Digest size mismatch (%zx != %x)\n",

crypto/asymmetric_keys/verify_pefile.c

376

pr_warn("Digest mismatch\n");

crypto/asymmetric_keys/verify_pefile.c

77

pr_warn("Unknown PEOPT magic = %04hx\n", pe32->magic);

crypto/asymmetric_keys/verify_pefile.c

98

pr_warn("Unsigned PE binary\n");

crypto/asymmetric_keys/x509_cert_parser.c

311

pr_warn("signatureAlgorithm (%u) differs from tbsCertificate.signature (%u)\n",

crypto/asymmetric_keys/x509_cert_parser.c

96

pr_warn("Couldn't decode AuthKeyIdentifier\n");

crypto/essiv.c

512

pr_warn("Only authenc() type AEADs are supported by ESSIV\n");

crypto/essiv.c

524

pr_warn("Failed to parse ESSIV cipher name from skcipher cra_name\n");

crypto/essiv.c

542

pr_warn("Unsupported essiv instantiation: essiv(%s,%s)\n",

crypto/jitterentropy-testing.c

61

pr_warn("Enabling data collection\n");

crypto/jitterentropy-testing.c

72

pr_warn("Disabling data collection\n");

crypto/jitterentropy-testing.c

99

pr_warn("One time data collection test enabled\n");

crypto/krb5/selftest.c

142

pr_warn("PRF calculation failed %d\n", ret);

crypto/krb5/selftest.c

194

pr_warn("Key derivation failed %d\n", ret);

crypto/krb5/selftest.c

20

pr_warn("!!! TESTINVAL %s:%u\n", __FILE__, __LINE__); \

crypto/krb5/selftest.c

281

pr_warn("Encrypted length mismatch %zu != %u\n", message_len, ct.len);

crypto/krb5/selftest.c

285

pr_warn("Data offset mismatch %zu != %u\n", data_offset, conf.len);

crypto/krb5/selftest.c

30

pr_warn("!!! TESTFAIL %s:%u\n", __FILE__, __LINE__); \

crypto/krb5/selftest.c

311

pr_warn("Encryption failed %d\n", ret);

crypto/krb5/selftest.c

316

pr_warn("Encrypted message wrong size %x != %zx\n", ret, message_len);

crypto/krb5/selftest.c

322

pr_warn("Ciphertext mismatch\n");

crypto/krb5/selftest.c

323

pr_warn("BUF %*phN\n", ct.len, buf);

crypto/krb5/selftest.c

324

pr_warn("CT %*phN\n", ct.len, ct.data);

crypto/krb5/selftest.c

325

pr_warn("PT %*phN%*phN\n", conf.len, conf.data, plain.len, plain.data);

crypto/krb5/selftest.c

336

pr_warn("Decryption failed %d\n", ret);

crypto/krb5/selftest.c

346

pr_warn("Confounder mismatch\n");

crypto/krb5/selftest.c

347

pr_warn("ENC %*phN\n", conf.len, buf);

crypto/krb5/selftest.c

348

pr_warn("DEC %*phN\n", conf.len, conf.data);

crypto/krb5/selftest.c

355

pr_warn("Plaintext mismatch\n");

crypto/krb5/selftest.c

356

pr_warn("BUF %*phN\n", plain.len, buf + conf.len);

crypto/krb5/selftest.c

357

pr_warn("PT %*phN\n", plain.len, plain.data);

crypto/krb5/selftest.c

423

pr_warn("MIC length mismatch %zu != %u\n",

crypto/krb5/selftest.c

437

pr_warn("Get MIC failed %d\n", ret);

crypto/krb5/selftest.c

443

pr_warn("MIC length mismatch %zu != %u\n", len, plain.len + mic.len);

crypto/krb5/selftest.c

449

pr_warn("MIC mismatch\n");

crypto/krb5/selftest.c

450

pr_warn("BUF %*phN\n", mic.len, buf);

crypto/krb5/selftest.c

451

pr_warn("MIC %*phN\n", mic.len, mic.data);

crypto/krb5/selftest.c

461

pr_warn("Verify MIC failed %d\n", ret);

crypto/krb5/selftest.c

471

pr_warn("Plaintext mismatch\n");

crypto/krb5/selftest.c

472

pr_warn("BUF %*phN\n", plain.len, buf + offset);

crypto/krb5/selftest.c

473

pr_warn("PT %*phN\n", plain.len, plain.data);

crypto/testmgr.c

1790

pr_warn("alg: hash: skipping comparison tests for %s because %s is unavailable\n",

crypto/testmgr.c

2512

pr_warn("alg: aead: skipping comparison tests for %s because %s is unavailable\n",

crypto/testmgr.c

3100

pr_warn("alg: skcipher: skipping comparison tests for %s because %s is unavailable\n",

crypto/testmgr.c

5638

pr_warn("testmgr: alg_test_descs entries in wrong order: '%s' before '%s'\n",

crypto/testmgr.c

5644

pr_warn("testmgr: duplicate alg_test_descs entry: '%s'\n",

crypto/testmgr.c

5669

pr_warn("alg: full crypto tests enabled. This is intended for developer use only.\n");

crypto/testmgr.c

5763

pr_warn("alg: self-tests for %s using %s failed (rc=%d)",

drivers/accel/qaic/qaic_ras.c

363

pr_warn(" Power break %s\n",

drivers/accessibility/speakup/devsynth.c

148

pr_warn("Couldn't initialize miscdevice /dev/synth.\n");

drivers/accessibility/speakup/devsynth.c

157

pr_warn("Couldn't initialize miscdevice /dev/synthu.\n");

drivers/accessibility/speakup/kobjects.c

301

pr_warn("i %d %d %d %d\n", i,

drivers/accessibility/speakup/kobjects.c

315

pr_warn("end %d %d %d %d\n", i,

drivers/accessibility/speakup/kobjects.c

321

pr_warn("set key failed\n");

drivers/accessibility/speakup/kobjects.c

348

pr_warn("silent value '%c' not in range (0,7)\n", ch);

drivers/accessibility/speakup/kobjects.c

401

pr_warn("%s already in use\n", new_synth_name);

drivers/accessibility/speakup/kobjects.c

403

pr_warn("failed to init synth %s\n", new_synth_name);

drivers/accessibility/speakup/kobjects.c

469

pr_warn("p_header is null, attr->attr.name is %s\n",

drivers/accessibility/speakup/kobjects.c

476

pr_warn("var is null, p_header->var_id is %i\n",

drivers/accessibility/speakup/kobjects.c

511

pr_warn("p_header is null, attr->attr.name is %s\n",

drivers/accessibility/speakup/kobjects.c

518

pr_warn("var is null, p_header->var_id is %i\n",

drivers/accessibility/speakup/kobjects.c

652

pr_warn("overflow or parsing error has occurred");

drivers/accessibility/speakup/kobjects.c

655

pr_warn("value for %s out of range, expect %d to %d\n",

drivers/accessibility/speakup/kobjects.c

685

pr_warn("value too long for %s\n",

drivers/accessibility/speakup/kobjects.c

689

pr_warn("%s unknown type %d\n",

drivers/accessibility/speakup/main.c

366

pr_warn("%sEFAULT\n", err_buf);

drivers/accessibility/speakup/main.c

369

pr_warn("%sEINVAL\n", err_buf);

drivers/accessibility/speakup/main.c

372

pr_warn("%sENOMEM\n", err_buf);

drivers/accessibility/speakup/selection.c

43

pr_warn("Selection: mark console not the same as cut\n");

drivers/accessibility/speakup/serialio.c

188

pr_warn("ttyS%i is an invalid port\n", synth->ser);

drivers/accessibility/speakup/serialio.c

221

pr_warn("%s: too many timeouts, deactivating speakup\n",

drivers/accessibility/speakup/serialio.c

234

pr_warn("%s: timed out (tx busy)\n",

drivers/accessibility/speakup/serialio.c

260

pr_warn("time out while waiting for input.\n");

drivers/accessibility/speakup/serialio.c

80

pr_warn("Unable to allocate port at %x, errno %i",

drivers/accessibility/speakup/speakup_acntpc.c

268

pr_warn("sorry, port already reserved\n");

drivers/accessibility/speakup/speakup_acntpc.c

277

pr_warn

drivers/accessibility/speakup/speakup_decpc.c

366

pr_warn("dec_pc at 0x%x, software not loaded\n",

drivers/accessibility/speakup/speakup_decpc.c

468

pr_warn("request_region: failed with 0x%x, %d\n",

drivers/accessibility/speakup/speakup_dtlk.c

341

pr_warn("sorry, port already reserved\n");

drivers/accessibility/speakup/speakup_keypc.c

148

pr_warn("synth timeout %d %d %d %d\n", s1, s2, s3, s4);

drivers/accessibility/speakup/speakup_keypc.c

274

pr_warn("sorry, port already reserved\n");

drivers/accessibility/speakup/speakup_keypc.c

282

pr_warn

drivers/accessibility/speakup/speakup_soft.c

403

pr_warn("Couldn't initialize miscdevice /dev/softsynth.\n");

drivers/accessibility/speakup/speakup_soft.c

413

pr_warn("Couldn't initialize miscdevice /dev/softsynthu.\n");

drivers/accessibility/speakup/spk_ttyio.c

181

pr_warn("speakup: Failed to set hardware flow control\n");

drivers/accessibility/speakup/spk_ttyio.c

216

pr_warn("speakup: Error registering line discipline. Most synths won't work.\n");

drivers/accessibility/speakup/spk_ttyio.c

242

pr_warn("%s: I/O error, deactivating speakup\n",

drivers/accessibility/speakup/spk_ttyio.c

302

pr_warn("spk_ttyio: timeout (%d) while waiting for input\n",

drivers/accessibility/speakup/synth.c

168

pr_warn("%s: can't restart synth\n", synth->long_name);

drivers/accessibility/speakup/synth.c

482

pr_warn("synth probe\n");

drivers/accessibility/speakup/synth.c

484

pr_warn("%s: device probe failed\n", in_synth->name);

drivers/acpi/acpi_extlog.c

281

pr_warn(FW_BUG "L1 Directory is invalid at physical %llx\n",

drivers/acpi/acpi_extlog.c

312

pr_warn(FW_BUG EMCA_BUG,

drivers/acpi/acpi_extlog.c

334

pr_warn(FW_BUG EMCA_BUG,

drivers/acpi/acpi_extlog.c

349

pr_warn(FW_BUG EMCA_BUG,

drivers/acpi/acpi_extlog.c

383

pr_warn(FW_BUG "Extended error log disabled because of problems parsing f/w tables\n");

drivers/acpi/acpi_ipmi.c

615

pr_warn("Can't register IPMI opregion space handle\n");

drivers/acpi/acpi_pad.c

422

pr_warn("Unsupported event [0x%x]\n", event);

drivers/acpi/acpi_processor.c

814

pr_warn("ACPI: Failed to claim processor _CST control\n");

drivers/acpi/acpi_watchdog.c

144

pr_warn("Unsupported address space: %u\n",

drivers/acpi/apei/apei-base.c

170

pr_warn(FW_WARN APEI_PFX

drivers/acpi/apei/apei-base.c

211

pr_warn(FW_WARN APEI_PFX

drivers/acpi/apei/apei-base.c

579

pr_warn(FW_BUG APEI_PFX

drivers/acpi/apei/apei-base.c

587

pr_warn(FW_BUG APEI_PFX

drivers/acpi/apei/apei-base.c

604

pr_warn(FW_BUG APEI_PFX

drivers/acpi/apei/apei-base.c

613

pr_warn(FW_BUG APEI_PFX

drivers/acpi/apei/einj-core.c

1059

pr_warn(FW_BUG "Invalid EINJ table.\n");

drivers/acpi/apei/einj-core.c

240

pr_warn(FW_WARN "Firmware does not respond in time\n");

drivers/acpi/apei/einj-core.c

436

pr_warn(FW_BUG "Invalid trigger error action table.\n");

drivers/acpi/apei/erst-dbg.c

121

pr_warn(ERST_DBG_PFX

drivers/acpi/apei/erst.c

121

pr_warn(FW_WARN "Firmware does not respond in time.\n");

drivers/acpi/apei/erst.c

197

pr_warn(FW_WARN

drivers/acpi/apei/erst.c

219

pr_warn(FW_WARN

drivers/acpi/apei/erst.c

284

pr_warn("MOVE_DATA can not be used in interrupt context.\n");

drivers/acpi/apei/erst.c

543

pr_warn(FW_WARN "too many record IDs!\n");

drivers/acpi/apei/erst.c

779

pr_warn("NVRAM ERST Log Address Range not implemented yet.\n");

drivers/acpi/apei/ghes.c

1189

pr_warn(FW_WARN GHES_PFX "Poll interval is 0 for generic hardware error source: %d, disabled.\n",

drivers/acpi/apei/ghes.c

1667

pr_warn(GHES_PFX "Generic hardware error source: %d notified via SEA is not supported\n",

drivers/acpi/apei/ghes.c

1675

pr_warn(GHES_PFX "Generic hardware error source: %d notified via NMI interrupt is not supported!\n",

drivers/acpi/apei/ghes.c

1682

pr_warn(GHES_PFX "Generic hardware error source: %d notified via SDE Interface is not supported!\n",

drivers/acpi/apei/ghes.c

1688

pr_warn(GHES_PFX "Generic hardware error source: %d notified via local interrupt is not supported!\n",

drivers/acpi/apei/ghes.c

1692

pr_warn(FW_WARN GHES_PFX "Unknown notification type: %u for generic hardware error source: %d\n",

drivers/acpi/apei/ghes.c

1700

pr_warn(FW_BUG GHES_PFX "Invalid error block length: %u for generic hardware error source: %d\n",

drivers/acpi/apei/ghes.c

291

pr_warn(FW_WARN GHES_PFX

drivers/acpi/apei/ghes.c

569

pr_warn(FW_BUG "arm error length: %d\n", length);

drivers/acpi/apei/ghes.c

570

pr_warn(FW_BUG "length is too small\n");

drivers/acpi/apei/ghes.c

571

pr_warn(FW_BUG "firmware-generated error record is incorrect\n");

drivers/acpi/apei/hest.c

149

pr_warn(FW_WARN HEST_PFX

drivers/acpi/apei/hest.c

157

pr_warn(FW_BUG HEST_PFX

drivers/acpi/apei/hest.c

223

pr_warn(FW_WARN HEST_PFX "Duplicated hardware error source ID: %d.\n",

drivers/acpi/arm64/apmt.c

54

pr_warn("APMT could not register gsi hwirq %d\n", irq);

drivers/acpi/arm64/cpuidle.c

47

pr_warn("Invalid PSCI power state %#x\n", state);

drivers/acpi/arm64/gtdt.c

176

pr_warn("Revision:%d doesn't support Platform Timers.\n",

drivers/acpi/arm64/gtdt.c

255

pr_warn("failed to map physical timer irq in frame %d.\n",

drivers/acpi/arm64/gtdt.c

265

pr_warn("failed to map virtual timer irq in frame %d.\n",

drivers/acpi/arm64/gtdt.c

338

pr_warn("failed to map the Watchdog interrupt.\n");

drivers/acpi/arm64/iort.c

1331

pr_warn("IORT node type %u does not describe an SMMU\n", type);

drivers/acpi/arm64/iort.c

1510

pr_warn(FW_BUG "Named component missing memory address limit\n");

drivers/acpi/arm64/iort.c

1534

pr_warn(FW_BUG "Root complex missing memory address limit\n");

drivers/acpi/arm64/iort.c

355

pr_warn(FW_BUG "[map %p] SINGLE MAPPING flag not allowed for node type %d, skipping ID map\n",

drivers/acpi/battery.c

565

pr_warn(FW_BUG "The _BIX method is broken, using _BIF.\n");

drivers/acpi/bus.c

715

pr_warn("event %x is not supported by \\_SB device\n", event);

drivers/acpi/ec.c

524

pr_warn("Warning: Maximum of %d stale EC events cleared\n", i);

drivers/acpi/event.c

178

pr_warn("Failed to create genetlink family for ACPI event\n");

drivers/acpi/irq.c

64

pr_warn("GSI: No registered irqchip, giving up\n");

drivers/acpi/nhlt.c

285

pr_warn("undefined mic array type: %#x\n", devcfg->mic.array_type);

drivers/acpi/numa/hmat.c

254

pr_warn("failed to reserve %#llx - %#llx in pxm: %d\n",

drivers/acpi/numa/srat.c

276

pr_warn("Found unsupported SRAT entry (type = 0x%x)\n",

drivers/acpi/numa/srat.c

412

pr_warn("SRAT: Failed to mark hotplug range [mem %#010Lx-%#010Lx] in memblock\n",

drivers/acpi/numa/srat.c

446

pr_warn("CFMWS: memblock size advise failed (%d)\n", err);

drivers/acpi/numa/srat.c

469

pr_warn("ACPI NUMA: Failed to add memblk for CFMWS node %d [mem %#llx-%#llx]\n",

drivers/acpi/numa/srat.c

482

pr_warn("Found unsupported x2apic [0x%08x] SRAT entry\n", pa->apic_id);

drivers/acpi/pci_irq.c

126

pr_warn("Firmware reports "

drivers/acpi/pmic/intel_pmic.c

351

pr_warn("%s: No PMIC registered\n", __func__);

drivers/acpi/pmic/intel_pmic.c

373

pr_warn("%s: Not implemented\n", __func__);

drivers/acpi/pmic/intel_pmic.c

374

pr_warn("%s: i2c-addr: 0x%x reg-addr 0x%x value 0x%x mask 0x%x\n",

drivers/acpi/pptt.c

162

pr_warn("Found duplicate cache level/type unable to determine uniqueness\n");

drivers/acpi/pptt.c

317

pr_warn("Invalid zero length subtable\n");

drivers/acpi/prmt.c

171

pr_warn("Failed to find VA of handler for GUID: %pUL, PA: 0x%llx",

drivers/acpi/prmt.c

184

pr_warn("Failed to find VA of static data buffer for GUID: %pUL, PA: 0x%llx",

drivers/acpi/prmt.c

196

pr_warn("Failed to find VA of acpi param buffer for GUID: %pUL, PA: 0x%llx",

drivers/acpi/processor_idle.c

1049

pr_warn("Limiting number of LPI states to max (%d)\n",

drivers/acpi/processor_idle.c

1051

pr_warn("Please increase ACPI_PROCESSOR_MAX_POWER if needed.\n");

drivers/acpi/processor_perflib.c

101

pr_warn("Failed to update perflib freq constraint: CPU%d (%d)\n",

drivers/acpi/processor_perflib.c

453

pr_warn(FW_BUG "BIOS needs update for CPU "

drivers/acpi/processor_perflib.c

475

pr_warn("Failed to write pstate_control [0x%x] to smi_command [0x%x]: %s\n",

drivers/acpi/processor_thermal.c

105

pr_warn("Failed to update thermal freq constraint: CPU%d (%d)\n",

drivers/acpi/processor_throttling.c

238

pr_warn("Exceed the limit of T-state\n");

drivers/acpi/processor_throttling.c

257

pr_warn("Unsupported Throttling notifier event\n");

drivers/acpi/processor_throttling.c

918

pr_warn("duty_cycle spans bit 4\n");

drivers/acpi/resource.c

246

pr_warn("acpi resource window ([%#llx-%#llx] ignored, not CPU addressable)\n",

drivers/acpi/resource.c

789

pr_warn("ACPI: IRQ %d override to %s%s, %s%s\n", gsi,

drivers/acpi/riscv/cpuidle.c

50

pr_warn("Invalid LPI entry method %#llx\n", lpi->address);

drivers/acpi/riscv/cpuidle.c

56

pr_warn("Invalid SBI power state %#x\n", state);

drivers/acpi/riscv/rhct.c

107

pr_warn("CBOM size is not the same across harts\n");

drivers/acpi/riscv/rhct.c

114

pr_warn("CBOZ size is not the same across harts\n");

drivers/acpi/riscv/rhct.c

121

pr_warn("CBOP size is not the same across harts\n");

drivers/acpi/scan.c

2809

pr_warn("STAO table present, but SPCR is missing\n");

drivers/acpi/sleep.c

742

pr_warn("Warning: Failed to enable wakeup from IRQ %d: %d\n",

drivers/acpi/sysfs.c

360

pr_warn("%4.4s: too many table instances\n", table_attr->name);

drivers/acpi/sysfs.c

662

pr_warn("Invalid GPE 0x%x", index);

drivers/acpi/sysfs.c

758

pr_warn("Can not change Invalid GPE/Fixed Event status\n");

drivers/acpi/tables.c

236

pr_warn("Found unsupported MADT entry (type = 0x%x)\n",

drivers/acpi/tables.c

363

pr_warn("BIOS bug: multiple APIC/MADT found, using %d\n",

drivers/acpi/tables.c

365

pr_warn("If \"acpi_apic_instance=%d\" works better, "

drivers/acpi/tables.c

378

pr_warn("Override [%4.4s-%8.8s], this is unsafe: tainting kernel\n",

drivers/acpi/tables.c

725

pr_warn("Failed to initialize tables, status=0x%x (%s)", status, msg);

drivers/acpi/thermal.c

870

pr_warn(FW_BUG "No valid trip points!\n");

drivers/acpi/viot.c

227

pr_warn("Unsupported node %x\n", hdr->type);

drivers/acpi/viot.c

233

pr_warn("No IOMMU node found\n");

drivers/android/binder.c

1667

pr_warn("%s: Unexpected outstanding_txns %d\n",

drivers/android/binder.c

1716

pr_warn("Unexpected reply error: %u\n",

drivers/android/binder.c

5315

pr_warn("%s: Unexpected outstanding_txns %d\n",

drivers/android/binder.c

6140

pr_warn("Unable to create file %s in binderfs (error %d)\n",

drivers/atm/idt77252.c

2547

pr_warn("%s: SCQ drain timeout: %u used\n",

drivers/base/arch_numa.c

174

pr_warn("PERCPU: %s allocator failed (%d), falling back to page size\n",

drivers/base/arch_topology.c

577

pr_warn("Topology for clusters of clusters not yet supported\n");

drivers/base/arch_topology.c

614

pr_warn("%pOF: empty cluster\n", cluster);

drivers/base/cacheinfo.c

626

pr_warn("Unable to detect cache hierarchy for CPU %d\n", cpu);

drivers/base/cpu.c

590

pr_warn("register_cpu %d failed (%d)\n", i, ret);

drivers/base/dd.c

922

pr_warn("Too long list of driver names for 'driver_async_probe'!\n");

drivers/base/driver.c

239

pr_warn("Driver '%s' needs updating - please use "

drivers/base/power/trace.c

261

pr_warn("Possible incorrect RTC due to pm_trace, please use 'ntpdate' or 'rdate' to reset it.\n");

drivers/block/aoe/aoenet.c

63

pr_warn("aoe: packet could not be sent on %s. %s\n",

drivers/block/drbd/drbd_nl.c

271

pr_warn("request: minor=%u, resource=%s; but that minor belongs to resource %s\n",

drivers/block/drbd/drbd_nl.c

280

pr_warn("request: minor=%u, volume=%u; but that minor is volume %u in %s\n",

drivers/block/loop.c

1166

pr_warn("%s: partition scan of loop%d failed (rc=%d)\n",

drivers/block/loop.c

450

pr_warn("%s: partition scan of loop%d (%s) failed (rc=%d)\n",

drivers/block/loop.c

918

pr_warn("support for the xor transformation has been removed.\n");

drivers/block/loop.c

921

pr_warn("support for cryptoloop has been removed. Use dm-crypt instead.\n");

drivers/block/null_blk/main.c

1560

pr_warn("tag set has unexpected nr_hw_queues: %d\n",

drivers/block/null_blk/main.c

2132

pr_warn("invalid block size\n");

drivers/block/null_blk/main.c

2133

pr_warn("defaults block size to %lu\n", PAGE_SIZE);

drivers/block/null_blk/main.c

2152

pr_warn("submit_queues param is set to %u.\n",

drivers/block/rnbd/rnbd-srv.c

328

pr_warn("Received unknown RTRS session event %d from session %s\n",

drivers/block/rnbd/rnbd-srv.c

405

pr_warn("Received unexpected message type %d from session %s\n",

drivers/block/rnbd/rnbd-srv.c

432

pr_warn("Allocating idr failed, err: %d\n", error);

drivers/block/sunvdc.c

1145

pr_warn(PFX "%s ldc down %llu seconds, draining queue\n",

drivers/block/sunvdc.c

1173

pr_warn(PFX "%s ldc link reset\n", port->disk_name);

drivers/block/sunvdc.c

375

pr_warn(PFX "Unexpected LDC event %d\n", event);

drivers/block/ublk_drv.c

3531

pr_warn("ublk%d: read batch cmd buffer failed\n",

drivers/block/ublk_drv.c

4528

pr_warn("%s: queue_id is wrong %x\n",

drivers/block/ublk_drv.c

4553

pr_warn("%s: invalid recovery flags %llx\n", __func__,

drivers/block/ublk_drv.c

4559

pr_warn("UBLK_F_QUIESCE requires UBLK_F_USER_RECOVERY\n");

drivers/block/ublk_drv.c

4595

pr_warn("%s: dev id not match %u %u\n",

drivers/block/ublk_drv.c

4601

pr_warn("%s: dev id is too large. Max supported is %d\n",

drivers/block/xen-blkback/blkback.c

1200

pr_warn("Frontend provided bogus ring requests (%d - %d = %d). Halting ring processing on dev=%04x\n",

drivers/block/xen-blkback/blkback.c

490

pr_warn("Error starting transaction\n");

drivers/block/xen-blkback/blkback.c

496

pr_warn("Error writing new size\n");

drivers/block/xen-blkback/blkback.c

506

pr_warn("Error writing the state\n");

drivers/block/xen-blkback/blkback.c

514

pr_warn("Error ending transaction\n");

drivers/block/xen-blkback/blkback.c

981

pr_warn("access denied: DISCARD [%llu->%llu] on dev=%04x\n",

drivers/block/xen-blkback/xenbus.c

497

pr_warn("xen_vbd_create: device %08x could not be opened\n",

drivers/block/xen-blkback/xenbus.c

504

pr_warn("xen_vbd_create: device %08x doesn't exist\n",

drivers/block/xen-blkback/xenbus.c

663

pr_warn("Error writing multi-queue-max-queues\n");

drivers/block/xen-blkback/xenbus.c

677

pr_warn("%s write out 'max-ring-page-order' failed\n", __func__);

drivers/block/xen-blkback/xenbus.c

686

pr_warn("%s failed\n", __func__);

drivers/block/xen-blkback/xenbus.c

728

pr_warn("changing physical device (from %x:%x to %x:%x) not supported.\n",

drivers/block/xen-blkfront.c

1108

pr_warn("blkfront: %#x's minor (%#x) out of range; ignoring\n",

drivers/block/xen-blkfront.c

2595

pr_warn("xen_blk: can't get major %d with name %s\n",

drivers/block/zloop.c

1070

pr_warn("Failed to open directory %s/%u (err=%d)\n",

drivers/block/zloop.c

1358

pr_warn("unknown parameter or missing value '%s'\n", p);

drivers/bus/mips_cdmm.c

694

pr_warn("cdmm: Failed to register CPU notifier\n");

drivers/bus/mvebu-mbus.c

1297

pr_warn(FW_WARN "deprecated mbus-mvebu Device Tree, suspend/resume will not work\n");

drivers/cdrom/gdrom.c

759

pr_warn("ATA Probe for GDROM failed\n");

drivers/cdrom/gdrom.c

831

pr_warn("Probe failed - error is 0x%X\n", err);

drivers/cdx/controller/mcdi.c

682

pr_warn("Incomplete MCDI response received %d. Expected %zu\n",

drivers/char/applicom.c

848

pr_warn("APPLICOM driver IOCTL, bad board number %d\n",

drivers/char/hw_random/intel-rng.c

219

pr_warn(PFX "unusual: RNG already disabled\n");

drivers/char/hw_random/intel-rng.c

316

pr_warn("%s", warning);

drivers/char/ipmi/ipmi_devintf.c

881

pr_warn("ipmi: can't register smi watcher\n");

drivers/char/ipmi/ipmi_dmi.c

79

pr_warn("Could not allocate dmi info\n");

drivers/char/ipmi/ipmi_msghandler.c

5684

pr_warn("SMI message count %d at exit\n", count);

drivers/char/ipmi/ipmi_msghandler.c

5687

pr_warn("recv message count %d at exit\n", count);

drivers/char/ipmi/ipmi_powernv.c

126

pr_warn("no current message?\n");

drivers/char/ipmi/ipmi_powernv.c

156

pr_warn("unexpected IPMI message size %lld\n", size);

drivers/char/ipmi/ipmi_powernv.c

162

pr_warn("unexpected IPMI message format (version %d)\n",

drivers/char/ipmi/ipmi_si_hardcode.c

75

pr_warn("Interface type specified for interface %d, was invalid: %s\n",

drivers/char/ipmi/ipmi_si_hotmod.c

133

pr_warn("Invalid hotmod address '%s': %d\n", curr, rv);

drivers/char/ipmi/ipmi_si_hotmod.c

175

pr_warn("Invalid hotmod option '%s'\n", curr);

drivers/char/ipmi/ipmi_si_hotmod.c

66

pr_warn("No hotmod %s given\n", name);

drivers/char/ipmi/ipmi_si_hotmod.c

79

pr_warn("Invalid hotmod %s '%s'\n", name, *curr);

drivers/char/ipmi/ipmi_si_hotmod.c

90

pr_warn("No option given for '%s'\n", curr);

drivers/char/ipmi/ipmi_si_hotmod.c

95

pr_warn("Bad option given for '%s'\n", curr);

drivers/char/ipmi/ipmi_si_intf.c

1574

pr_warn("Error getting response from get global enables command, the event buffer is not enabled\n");

drivers/char/ipmi/ipmi_si_intf.c

1585

pr_warn("Invalid return from get global enables command, cannot enable the event buffer\n");

drivers/char/ipmi/ipmi_si_intf.c

1603

pr_warn("Error getting response from set global, enables command, the event buffer is not enabled\n");

drivers/char/ipmi/ipmi_si_intf.c

1613

pr_warn("Invalid return from get global, enables command, not enable the event buffer\n");

drivers/char/ipmi/ipmi_si_intf.c

2225

pr_warn("Unable to find any System Interface(s)\n");

drivers/char/ipmi/ipmi_smic_sm.c

220

pr_warn("ipmi_smic_drv: smic hosed: %s\n", reason);

drivers/char/ipmi/ipmi_watchdog.c

1001

pr_warn("IPMI NMI didn't seem to occur. The NMI pretimeout will likely not work\n");

drivers/char/ipmi/ipmi_watchdog.c

1249

pr_warn("Pretimeout op is to give data but NMI pretimeout is enabled, setting pretimeout op to none\n");

drivers/char/ipmi/ipmi_watchdog.c

1258

pr_warn("Can't register nmi handler\n");

drivers/char/ipmi/ipmi_watchdog.c

1300

pr_warn("can't register smi watcher\n");

drivers/char/ipmi/ipmi_watchdog.c

421

pr_warn("set timeout error: %d\n", rv);

drivers/char/ipmi/ipmi_watchdog.c

502

pr_warn("Unable to extend the watchdog timeout\n");

drivers/char/ipmi/ipmi_watchdog.c

544

pr_warn("heartbeat send failure: %d\n", rv);

drivers/char/ipmi/ipmi_watchdog.c

961

pr_warn("Unable to get IPMI version, assuming 1.0\n");

drivers/char/ipmi/ipmi_watchdog.c

992

pr_warn("Error starting timer to test NMI: 0x%x. The NMI pretimeout will likely not work\n",

drivers/char/ipmi/kcs_bmc_aspeed.c

377

pr_warn("%s: Unsupported channel: %d", __func__, kcs_bmc->channel);

drivers/char/ipmi/kcs_bmc_aspeed.c

456

pr_warn("%s: Unsupported channel: %d", __func__, kcs_bmc->channel);

drivers/char/nvram.c

288

pr_warn("nvram: Using obsolete PMAC_NVRAM_GET_OFFSET ioctl\n");

drivers/char/ppdev.c

297

pr_warn("%s: no associated port!\n", name);

drivers/char/ppdev.c

304

pr_warn("%s: failed to get index!\n", name);

drivers/char/ppdev.c

316

pr_warn("%s: failed to register device!\n", name);

drivers/char/ppdev.c

848

pr_warn(CHRDEV ": unable to get major %d\n", PP_MAJOR);

drivers/char/ppdev.c

857

pr_warn(CHRDEV ": unable to register with parport\n");

drivers/char/tpm/eventlog/efi.c

47

pr_warn("UEFI TPM log area empty\n");

drivers/char/tpm/tpm-dev-common.c

96

pr_warn("TPM user space timeout is deprecated (pid=%d)\n",

drivers/char/tpm/tpm2-sessions.c

161

pr_warn("tpm: unsupported name algorithm: 0x%04x\n", hash_alg);

drivers/clk/at91/clk-h32mx.c

39

pr_warn("H32MX clock is too fast\n");

drivers/clk/at91/clk-main.c

362

pr_warn("Main crystal frequency not set, using approximate value\n");

drivers/clk/at91/clk-master.c

106

pr_warn("master clk div is underclocked");

drivers/clk/at91/clk-master.c

108

pr_warn("master clk div is overclocked");

drivers/clk/at91/clk-master.c

150

pr_warn("MCKR DIV not configured properly by firmware!\n");

drivers/clk/at91/clk-master.c

199

pr_warn("master clk div is underclocked");

drivers/clk/at91/clk-master.c

201

pr_warn("master clk div is overclocked");

drivers/clk/at91/clk-master.c

237

pr_warn("Failed to restore MCK DIV clock\n");

drivers/clk/at91/clk-master.c

460

pr_warn("MCKR PRES was not configured properly by firmware!\n");

drivers/clk/at91/clk-pll.c

299

pr_warn("PLLAR was not configured properly by firmware\n");

drivers/clk/at91/pmc.c

187

pr_warn("%s(): unable to map securam\n", __func__);

drivers/clk/bcm/clk-kona-setup.c

311

pr_warn("%s: ignoring selector for %s (no parents)\n",

drivers/clk/bcm/clk-kona-setup.c

345

pr_warn("%s: bad %s fraction width for %s (%u > %u)\n",

drivers/clk/bcm/clk-kona-setup.c

467

pr_warn("%s: ignoring trigger for %s (not needed)\n",

drivers/clk/bcm/clk-kona.c

181

pr_warn("%s: %s/0x%04x bit %u was never %s\n", __func__,

drivers/clk/bcm/clk-kona.c

444

pr_warn("%s: invalid gate disable request (ignoring)\n",

drivers/clk/berlin/berlin2-pll.c

53

pr_warn("%s has zero rfdiv\n", clk_hw_get_name(hw));

drivers/clk/berlin/berlin2-pll.c

61

pr_warn("%s has zero vcodiv (index %d)\n",

drivers/clk/clk-conf.c

142

pr_warn("clk: couldn't get clock %d for %pOF\n",

drivers/clk/clk-conf.c

45

pr_warn("clk: couldn't get parent clock %d for %pOF\n",

drivers/clk/clk-conf.c

63

pr_warn("clk: couldn't get assigned clock %d for %pOF\n",

drivers/clk/clk-divider.c

535

pr_warn("divider value exceeds LOWORD field\n");

drivers/clk/clk-scpi.c

290

pr_warn("unable to register cpufreq device");

drivers/clk/clk-stm32f4.c

1847

pr_warn("%s: Unable to get syscfg\n", __func__);

drivers/clk/clk-stm32f4.c

2022

pr_warn("Unable to register %s clk\n", aux_clk->name);

drivers/clk/clk-stm32h7.c

1223

pr_warn("%s: Unable to get syscfg\n", __func__);

drivers/clk/clk-versaclock7.c

512

pr_warn("bank_src%d = %d is not supported\n", bank_idx, output_bank_src);

drivers/clk/clk-vt8500.c

373

pr_warn("%s: requested rate %lu, found rate %lu\n", __func__,

drivers/clk/clk-vt8500.c

421

pr_warn("%s: rate error is %lu\n", __func__, min_err);

drivers/clk/clk-vt8500.c

432

pr_warn("%s: PLL recommended input frequency 10..200Mhz (requested %d Mhz)\n",

drivers/clk/clk-vt8500.c

488

pr_warn("%s: impossible rate %lu\n", __func__, rate);

drivers/clk/clk-vt8500.c

493

pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate,

drivers/clk/clk-vt8500.c

536

pr_warn("%s: impossible rate %lu\n", __func__, rate);

drivers/clk/clk-vt8500.c

541

pr_warn("%s: requested rate %lu, found rate %lu\n", __func__, rate,

drivers/clk/clk.c

1525

pr_warn("clk: Not disabling unused clocks\n");

drivers/clk/clk.c

1579

pr_warn("%s: %s: clk_rate_request has initialized min or max rate.\n",

drivers/clk/clk.c

3795

pr_warn("\n");

drivers/clk/clk.c

3796

pr_warn("********************************************************************\n");

drivers/clk/clk.c

3797

pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");

drivers/clk/clk.c

3798

pr_warn("** **\n");

drivers/clk/clk.c

3799

pr_warn("** WRITEABLE clk DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **\n");

drivers/clk/clk.c

3800

pr_warn("** **\n");

drivers/clk/clk.c

3801

pr_warn("** This means that this kernel is built to expose clk operations **\n");

drivers/clk/clk.c

3802

pr_warn("** such as parent or rate setting, enabling, disabling, etc. **\n");

drivers/clk/clk.c

3803

pr_warn("** to userspace, which may compromise security on your system. **\n");

drivers/clk/clk.c

3804

pr_warn("** **\n");

drivers/clk/clk.c

3805

pr_warn("** If you see this message and you are not debugging the **\n");

drivers/clk/clk.c

3806

pr_warn("** kernel, report this immediately to your vendor! **\n");

drivers/clk/clk.c

3807

pr_warn("** **\n");

drivers/clk/clk.c

3808

pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");

drivers/clk/clk.c

3809

pr_warn("********************************************************************\n");

drivers/clk/clk.c

4024

pr_warn("%s: Failed to get phase for clk '%s'\n", __func__,

drivers/clk/clk.c

4057

pr_warn("%s: critical clk '%s' failed to prepare\n",

drivers/clk/clk.c

4064

pr_warn("%s: critical clk '%s' failed to enable\n",

drivers/clk/clk.c

4602

pr_warn("%s: unregistering prepared clock: %s\n",

drivers/clk/clk.c

4606

pr_warn("%s: unregistering protected clock: %s\n",

drivers/clk/imx/clk-imx6q.c

960

pr_warn("failed to set up CLKO: %d\n", ret);

drivers/clk/imx/clk-imx6sl.c

424

pr_warn("%s: failed to set AHB clock rate %d!\n",

drivers/clk/imx/clk-imx8qxp-lpcg.c

343

pr_warn("i.MX clk %u: register failed with %ld\n",

drivers/clk/imx/clk-pllv4.c

129

pr_warn("%s: unable to round rate %lu, parent rate %lu\n",

drivers/clk/imx/clk-scu.c

433

pr_warn("%s: clk unprepare failed %d\n", clk_hw_get_name(hw),

drivers/clk/imx/clk-scu.c

715

pr_warn("%s: failed to attached the power domain %d\n",

drivers/clk/ingenic/tcu.c

367

pr_warn("TCU clock missing from device tree, please update your device tree\n");

drivers/clk/mediatek/clk-cpumux.c

124

pr_warn("%pOF: Trying to register duplicate clock ID: %d\n",

drivers/clk/mediatek/clk-fhctl.c

144

pr_warn("%s: FHCTL hopping timeout\n", pll->data->name);

drivers/clk/mediatek/clk-gate.c

283

pr_warn("%pOF: Trying to register duplicate clock ID: %d\n",

drivers/clk/mediatek/clk-mtk.c

165

pr_warn("Trying to register duplicate clock ID: %d\n", ff->id);

drivers/clk/mediatek/clk-mtk.c

344

pr_warn("Trying to register duplicate clock ID: %d\n",

drivers/clk/mediatek/clk-mtk.c

412

pr_warn("Trying to register duplicate clock ID: %d\n",

drivers/clk/mediatek/clk-mtk.c

99

pr_warn("Trying to register duplicate clock ID: %d\n", rc->id);

drivers/clk/mediatek/clk-mux.c

352

pr_warn("%pOF: Trying to register duplicate clock ID: %d\n",

drivers/clk/mediatek/clk-pll.c

432

pr_warn("%pOF: Trying to register duplicate clock ID: %d\n",

drivers/clk/mediatek/clk-pllfh.c

72

pr_warn("cannot find \"%s\"\n", compatible_node);

drivers/clk/meson/clk-pll.c

454

pr_warn("%s: pll %s didn't lock, trying to set old rate %lu\n",

drivers/clk/microchip/clk-core.c

623

pr_warn("spll: no match found\n");

drivers/clk/mvebu/clk-cpu.c

183

pr_warn("%s: pmu-dfs base register not set, dynamic frequency scaling not available\n",

drivers/clk/nxp/clk-lpc18xx-ccu.c

233

pr_warn("%s: failed to register %s\n", __func__, branch->name);

drivers/clk/nxp/clk-lpc18xx-ccu.c

273

pr_warn("%s: failed to map address range\n", __func__);

drivers/clk/nxp/clk-lpc18xx-ccu.c

295

pr_warn("%s: failed to get clock name at idx %d\n",

drivers/clk/nxp/clk-lpc18xx-cgu.c

360

pr_warn("%s: pre/post dividers not supported\n", __func__);

drivers/clk/nxp/clk-lpc18xx-cgu.c

368

pr_warn("%s: unable to calculate rate\n", __func__);

drivers/clk/nxp/clk-lpc18xx-cgu.c

379

pr_warn("%s: pll dividers not supported\n", __func__);

drivers/clk/nxp/clk-lpc18xx-cgu.c

385

pr_warn("%s: unable to support rate %lu\n", __func__, req->rate);

drivers/clk/nxp/clk-lpc18xx-cgu.c

402

pr_warn("%s: pll dividers not supported\n", __func__);

drivers/clk/nxp/clk-lpc18xx-cgu.c

408

pr_warn("%s: unable to support rate %lu\n", __func__, rate);

drivers/clk/nxp/clk-lpc18xx-cgu.c

441

pr_warn("%s: unable to lock pll\n", __func__);

drivers/clk/nxp/clk-lpc18xx-cgu.c

608

pr_warn("%s: failed to register irc clk\n", __func__);

drivers/clk/nxp/clk-lpc18xx-cgu.c

616

pr_warn("%s: failed to register osc clk\n", __func__);

drivers/clk/nxp/clk-lpc18xx-cgu.c

623

pr_warn("%s: failed to register pll (%d)\n", __func__, i);

drivers/clk/nxp/clk-lpc18xx-cgu.c

631

pr_warn("%s: failed to register div %d\n", __func__, i);

drivers/clk/nxp/clk-lpc18xx-cgu.c

649

pr_warn("%s: register base clk %d failed\n", __func__, i);

drivers/clk/nxp/clk-lpc18xx-cgu.c

659

pr_warn("%s: failed to map address range\n", __func__);

drivers/clk/pistachio/clk-pll.c

219

pr_warn("%s: VCO %llu is out of range %lu..%lu\n", name, vco,

drivers/clk/pistachio/clk-pll.c

224

pr_warn("%s: PFD %llu is too low (min %lu)\n",

drivers/clk/pistachio/clk-pll.c

227

pr_warn("%s: PFD %llu is too high (max %llu)\n",

drivers/clk/pistachio/clk-pll.c

246

pr_warn("%s: changing postdiv while PLL is enabled\n", name);

drivers/clk/pistachio/clk-pll.c

249

pr_warn("%s: postdiv2 should not exceed postdiv1\n", name);

drivers/clk/pistachio/clk-pll.c

372

pr_warn("%s: VCO %u is out of range %lu..%lu\n", name, vco,

drivers/clk/pistachio/clk-pll.c

377

pr_warn("%s: PFD %u is too low (min %lu)\n",

drivers/clk/pistachio/clk-pll.c

380

pr_warn("%s: PFD %u is too high (max %u)\n",

drivers/clk/pistachio/clk-pll.c

392

pr_warn("%s: changing postdiv while PLL is enabled\n", name);

drivers/clk/pistachio/clk-pll.c

395

pr_warn("%s: postdiv2 should not exceed postdiv1\n", name);

drivers/clk/pistachio/clk.c

50

pr_warn("Failed to register clock %d: %ld\n", i,

drivers/clk/renesas/clk-mstp.c

315

pr_warn("%pOF lacks #power-domain-cells\n", np);

drivers/clk/renesas/clk-r8a73a4.c

143

pr_warn("%s: unexpected parent of %s\n", __func__,

drivers/clk/renesas/clk-r8a7740.c

150

pr_warn("%s: missing renesas,mode property\n", __func__);

drivers/clk/rockchip/clk-cpu.c

183

pr_warn("%s: limiting alt-divider %lu to %d\n",

drivers/clk/rockchip/clk-pll.c

1177

pr_warn("%s: Unknown pll type for pll clk %s\n",

drivers/clk/rockchip/clk-pll.c

244

pr_warn("%s: pll update unsuccessful, trying to restore old params\n",

drivers/clk/rockchip/clk-pll.c

338

pr_warn("%s: parent of %s not available\n",

drivers/clk/rockchip/clk-pll.c

479

pr_warn("%s: pll update unsuccessful, trying to restore old params\n",

drivers/clk/rockchip/clk-pll.c

728

pr_warn("%s: pll update unsuccessful, trying to restore old params\n",

drivers/clk/rockchip/clk-pll.c

822

pr_warn("%s: parent of %s not available\n",

drivers/clk/rockchip/clk-pll.c

977

pr_warn("%s: pll update unsuccessful, trying to restore old params\n",

drivers/clk/rockchip/clk-rk3188.c

851

pr_warn("%s: could not reparent aclk_cpu_pre to gpll\n",

drivers/clk/rockchip/clk-rk3188.c

856

pr_warn("%s: missing clocks to reparent aclk_cpu_pre to gpll\n",

drivers/clk/rockchip/clk.c

301

pr_warn("%s: could not find %s as parent of %s, rate changes may not work\n",

drivers/clk/samsung/clk-pll.c

1582

pr_warn("%s: Unknown pll type for pll clk %s\n",

drivers/clk/samsung/clk.c

257

pr_warn("%pOF: incorrect res size for automatic clocks\n", np);

drivers/clk/samsung/clk.c

506

pr_warn("%pOF: Unable to get CMU sysreg\n", np);

drivers/clk/sophgo/clk-sg2042-clkgen.c

821

pr_warn("divider value exceeds LOWORD field\n");

drivers/clk/sophgo/clk-sg2042-pll.c

117

pr_warn("%s not locked\n", pll->hw.init->name);

drivers/clk/sophgo/clk-sg2042-pll.c

125

pr_warn("%s still updating\n", pll->hw.init->name);

drivers/clk/sophgo/clk-sg2042-pll.c

236

pr_warn("%s can not find in postdiv array!\n", __func__);

drivers/clk/sophgo/clk-sg2042-pll.c

392

pr_warn("%s: Can't find a proper pll setting\n", pll->hw.init->name);

drivers/clk/sophgo/clk-sg2044-pll.c

309

pr_warn("%s: fail to lock pll\n", clk_hw_get_name(&pll->common.hw));

drivers/clk/tegra/clk-tegra124-emc.c

523

pr_warn("%s: no memory timings registered\n", __func__);

drivers/clk/tegra/clk-tegra124-emc.c

528

pr_warn("%s: couldn't find node for EMC driver\n", __func__);

drivers/clk/tegra/clk-tegra124.c

1075

pr_warn("clock %u not found\n", init->clk_id);

drivers/clk/tegra/clk-tegra210.c

1070

pr_warn("pllre boot base 0x%x : expected 0x%x\n",

drivers/clk/tegra/clk-tegra210.c

1072

pr_warn("(comparison mask = 0x%x)\n",

drivers/clk/tegra/clk-tegra210.c

1086

pr_warn("unexpected IDDQ bit set for enabled clock\n");

drivers/clk/tegra/clk-tegra210.c

1095

pr_warn("PLL_RE already enabled. Postponing set full defaults\n");

drivers/clk/tegra/clk-tegra210.c

1197

pr_warn("PLL_X already enabled. Postponing set full defaults\n");

drivers/clk/tegra/clk-tegra210.c

1253

pr_warn("PLL_MB already enabled. Postponing set full defaults\n");

drivers/clk/tegra/clk-tegra210.c

1310

pr_warn("PLL_P already enabled. Postponing set full defaults\n");

drivers/clk/tegra/clk-tegra210.c

1373

pr_warn("PLL_U already enabled. Postponing set full defaults\n");

drivers/clk/tegra/clk-tegra210.c

3176

pr_warn("clock %u not found\n", init->clk_id);

drivers/clk/tegra/clk-tegra210.c

747

pr_warn("boot misc%d 0x%x: expected 0x%x\n",

drivers/clk/tegra/clk-tegra210.c

749

pr_warn(" (comparison mask = 0x%x)\n", mask);

drivers/clk/tegra/clk-tegra210.c

789

pr_warn("%s already enabled. Postponing set full defaults\n",

drivers/clk/tegra/clk-tegra210.c

844

pr_warn("PLL_A boot enabled with IDDQ set\n");

drivers/clk/tegra/clk-tegra210.c

848

pr_warn("PLL_A already enabled. Postponing set full defaults\n");

drivers/clk/tegra/clk-tegra210.c

909

pr_warn("PLL_D already enabled. Postponing set full defaults\n");

drivers/clk/tegra/clk-tegra210.c

951

pr_warn("plldss boot enabled with IDDQ set\n");

drivers/clk/tegra/clk-tegra210.c

984

pr_warn("%s already enabled. Postponing set full defaults\n",

drivers/clk/ti/apll.c

283

pr_warn("%s failed to transition to locked\n",

drivers/clk/ti/apll.c

73

pr_warn("clock: %s failed transition to '%s'\n",

drivers/clk/ti/clk.c

183

pr_warn("Bad number of tags on %s\n",

drivers/clk/ti/clk.c

213

pr_warn("Bad tag in %s at %d: %s\n",

drivers/clk/ti/clk.c

236

pr_warn("missing clkctrl nodes, please update your dts.\n");

drivers/clk/ti/clk.c

241

pr_warn("failed to lookup clock node %s, ret=%ld\n",

drivers/clk/ti/clockdomain.c

141

pr_warn("can't setup clkdm for basic clk %s\n",

drivers/clk/ti/dpll3xxx.c

322

pr_warn("clock: SSC modulation frequency of DPLL %s greater than %ld\n",

drivers/clk/ti/dpll3xxx.c

361

pr_warn("clock: SSC multiplier of DPLL %s is out of range\n",

drivers/clk/ti/fapll.c

205

pr_warn("FAPLL main divider rates unsupported\n");

drivers/clk/uniphier/clk-uniphier-gate.c

39

pr_warn("failed to disable clk\n");

drivers/clk/uniphier/clk-uniphier-gate.c

48

pr_warn("is_enabled() may return wrong result\n");

drivers/clk/versatile/clk-sp810.c

98

pr_warn("Failed to obtain parent clocks for SP810!\n");

drivers/clk/zynq/clkc.c

153

pr_warn("%s: FCLK%u enable failed\n", __func__,

drivers/clk/zynq/clkc.c

252

pr_warn("ps_clk frequency not specified, using 33 MHz.\n");

drivers/clk/zynq/clkc.c

501

pr_warn("%s: trace clk enable failed\n", __func__);

drivers/clk/zynq/clkc.c

504

pr_warn("%s: debug APB clk enable failed\n", __func__);

drivers/clocksource/acpi_pm.c

144

pr_warn("* Found PM-Timer Bug on the chipset. Due to workarounds for a bug,\n"

drivers/clocksource/acpi_pm.c

158

pr_warn("* The chipset may have PM-Timer Bug. Due to workarounds for a bug,\n"

drivers/clocksource/acpi_pm.c

267

pr_warn("PMTMR: invalid 'pmtmr=' value: '%s'\n", arg);

drivers/clocksource/arc_timer.c

110

pr_warn("Global-64-bit-Ctr clocksource not detected\n");

drivers/clocksource/arc_timer.c

168

pr_warn("Local-64-bit-Ctr clocksource not detected\n");

drivers/clocksource/arc_timer.c

174

pr_warn("Local-64-bit-Ctr not usable in SMP\n");

drivers/clocksource/arm_arch_timer.c

1136

pr_warn("multiple nodes in dt, skipping\n");

drivers/clocksource/arm_arch_timer.c

1195

pr_warn("already initialized, skipping\n");

drivers/clocksource/arm_arch_timer.c

538

pr_warn("Can't enable workaround for %s (clashes with %s\n)",

drivers/clocksource/arm_arch_timer.c

818

pr_warn("WARNING: Invalid trigger for IRQ%d, assuming level low\n", irq);

drivers/clocksource/arm_arch_timer.c

819

pr_warn("WARNING: Please fix your firmware\n");

drivers/clocksource/arm_arch_timer.c

874

pr_warn("frequency not available\n");

drivers/clocksource/arm_global_timer.c

387

pr_warn("global-timer: non support for this cpu version.\n");

drivers/clocksource/arm_global_timer.c

393

pr_warn("global-timer: unable to parse irq\n");

drivers/clocksource/arm_global_timer.c

399

pr_warn("global-timer: invalid base address\n");

drivers/clocksource/arm_global_timer.c

409

pr_warn("global-timer: clk not found\n");

drivers/clocksource/arm_global_timer.c

421

pr_warn("Unable to register clock notifier\n");

drivers/clocksource/arm_global_timer.c

427

pr_warn("global-timer: can't allocate memory\n");

drivers/clocksource/arm_global_timer.c

435

pr_warn("global-timer: can't register interrupt %d (%d)\n",

drivers/clocksource/armv7m_systick.c

34

pr_warn("system-timer: invalid base address\n");

drivers/clocksource/armv7m_systick.c

80

pr_warn("ARM System timer register failed (%d)\n", ret);

drivers/clocksource/dw_apb_timer_of.c

47

pr_warn("pclk for %pOFn is present, but could not be activated\n",

drivers/clocksource/mips-gic-timer.c

241

pr_warn("Unable to register clocksource\n");

drivers/clocksource/mips-gic-timer.c

253

pr_warn("No DT definition\n");

drivers/clocksource/mips-gic-timer.c

285

pr_warn("Unable to register clock notifier\n");

drivers/clocksource/mps2-timer.c

87

pr_warn("spurious interrupt\n");

drivers/clocksource/samsung_pwm_timer.c

430

pr_warn("%s: invalid channel index in samsung,pwm-outputs property\n", __func__);

drivers/clocksource/scx200_hrt.c

69

pr_warn("unable to lock timer region\n");

drivers/clocksource/timer-cadence-ttc.c

358

pr_warn("Unable to register clock notifier.\n");

drivers/clocksource/timer-cadence-ttc.c

437

pr_warn("Unable to register clock notifier.\n");

drivers/clocksource/timer-digicolor.c

192

pr_warn("request of timer irq %d failed (%d)\n", irq, ret);

drivers/clocksource/timer-integrator-ap.c

184

pr_warn("Failed to read property\n");

drivers/clocksource/timer-integrator-ap.c

204

pr_warn("Failed to read property\n");

drivers/clocksource/timer-meson6.c

194

pr_warn("failed to setup irq %d\n", irq);

drivers/clocksource/timer-npcm7xx.c

209

pr_warn("%pOF: Failed to get clock for timer1: %pe", np, clk);

drivers/clocksource/timer-riscv.c

216

pr_warn("Invalid hartid for node [%pOF] error = [%lu]\n",

drivers/clocksource/timer-riscv.c

223

pr_warn("Invalid cpuid for hartid [%lu]\n", hartid);

drivers/clocksource/timer-ti-32k.c

92

pr_warn("%s: could not get clock %s %li\n",

drivers/clocksource/timer-ti-32k.c

99

pr_warn("%s: could not enable %s: %i\n",

drivers/clocksource/timer-ti-dm-systimer.c

646

pr_warn("Incomplete dtb for percpu dmtimer %pOF\n", np->parent);

drivers/clocksource/timer-ti-dm.c

615

pr_warn("%s: Please use omap_dm_timer_request_by_node()\n",

drivers/comedi/comedi_fops.c

1376

pr_warn("No check for data length of config insn id %i is implemented\n",

drivers/comedi/comedi_fops.c

1378

pr_warn("Add a check to %s in %s\n", __func__, __FILE__);

drivers/comedi/comedi_fops.c

1379

pr_warn("Assuming n=%i is correct\n", insn->n);

drivers/comedi/drivers.c

1120

pr_warn("BUG! %s called with NULL hardware_device\n", __func__);

drivers/comedi/drivers/c6xdigio.c

299

pr_warn("failed to register pnp driver - err %d\n",

drivers/comedi/drivers/comedi_test.c

874

pr_warn("comedi_test: unable to create class\n");

drivers/comedi/drivers/comedi_test.c

880

pr_warn("comedi_test: unable to create device\n");

drivers/comedi/drivers/comedi_test.c

886

pr_warn("comedi_test: unable to auto-configure device\n");

drivers/comedi/drivers/mite.c

523

pr_warn("bug! invalid mem bit width for dma transfer\n");

drivers/comedi/drivers/mite.c

542

pr_warn("bug! invalid dev bit width for dma transfer\n");

drivers/comedi/proc.c

68

pr_warn("comedi: unable to create proc entry\n");

drivers/connector/cn_proc.c

478

pr_warn("cn_proc failed to register\n");

drivers/cpufreq/acpi-cpufreq.c

902

pr_warn(FW_WARN "P-state 0 is not max freq\n");

drivers/cpufreq/amd-pstate-ut.c

265

pr_warn("%s: failed to update status for %s->%s: %d\n", __func__,

drivers/cpufreq/amd-pstate.c

1064

pr_warn("Failed to initialize CPU %d: %d\n", policy->cpu, ret);

drivers/cpufreq/amd-pstate.c

1543

pr_warn("Failed to initialize CPU %d: %d\n", policy->cpu, ret);

drivers/cpufreq/amd-pstate.c

463

pr_warn("failed to get auto_sel, ret: %d\n", ret);

drivers/cpufreq/amd-pstate.c

471

pr_warn("failed to set auto_sel, ret: %d\n", ret);

drivers/cpufreq/armada-8k-cpufreq.c

56

pr_warn("Failed to get cpu%d device\n", cpu);

drivers/cpufreq/armada-8k-cpufreq.c

62

pr_warn("Cannot get clock for CPU %d\n", cpu);

drivers/cpufreq/cppc_cpufreq.c

230

pr_warn("%s: failed to create kworker_fie: %ld\n", __func__,

drivers/cpufreq/cppc_cpufreq.c

239

pr_warn("%s: failed to set SCHED_DEADLINE: %d\n", __func__,

drivers/cpufreq/cppc_cpufreq.c

78

pr_warn("%s: failed to read perf counters\n", __func__);

drivers/cpufreq/cpufreq-nforce2.c

327

pr_warn("cpu_khz not set, can't calculate multiplier!\n");

drivers/cpufreq/cpufreq.c

1350

pr_warn("%s: Freeing active policy\n", __func__);

drivers/cpufreq/cpufreq.c

2433

pr_warn("Can't use %s governor as dynamic switching is disallowed. Fallback to %s governor\n",

drivers/cpufreq/cpufreq.c

477

pr_warn("CPU%u: Fast frequency switching not enabled\n",

drivers/cpufreq/elanfreq.c

182

pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");

drivers/cpufreq/freq_table.c

303

pr_warn("Duplicate freq-table entries: %u\n",

drivers/cpufreq/intel_pstate.c

1674

pr_warn("Failed to update freq constraint: CPU%d\n", cpu);

drivers/cpufreq/intel_pstate.c

3905

pr_warn("Problematic setup: Hybrid processor with disabled HWP\n");

drivers/cpufreq/mvebu-cpufreq.c

46

pr_warn(FW_WARN "not enabling cpufreq, deprecated armada-xp-cpu-clock binding\n");

drivers/cpufreq/p4-clockmod.c

146

pr_warn("Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.\n");

drivers/cpufreq/pmac64-cpufreq.c

140

pr_warn("Timeout in clock slewing !\n");

drivers/cpufreq/pmac64-cpufreq.c

268

pr_warn("pfunc switch error %d\n", rc);

drivers/cpufreq/pmac64-cpufreq.c

284

pr_warn("Timeout in clock slewing !\n");

drivers/cpufreq/pmac64-cpufreq.c

584

pr_warn("No low frequency mode available on this model !\n");

drivers/cpufreq/powernow-k6.c

183

pr_warn("unknown frequency %u, cannot determine current multiplier\n",

drivers/cpufreq/powernow-k6.c

185

pr_warn("use module parameters max_multiplier and bus_frequency\n");

drivers/cpufreq/powernow-k7.c

428

pr_warn("ACPI perflib can not be used on this platform\n");

drivers/cpufreq/powernow-k7.c

547

pr_warn("SGTC too large %d\n", sgtc);

drivers/cpufreq/powernow-k7.c

569

pr_warn("%s laptop with broken PST tables in BIOS detected\n",

drivers/cpufreq/powernow-k7.c

571

pr_warn("You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n");

drivers/cpufreq/powernow-k7.c

572

pr_warn("cpufreq scaling has been disabled as a result of this\n");

drivers/cpufreq/powernow-k7.c

607

pr_warn("can not determine bus frequency\n");

drivers/cpufreq/powernow-k8.c

1158

pr_warn("WTF driver: %s\n", cur_drv);

drivers/cpufreq/powernow-k8.c

1163

pr_warn("This CPU is not supported anymore, using acpi-cpufreq instead.\n");

drivers/cpufreq/powernow-k8.c

567

pr_warn("Only %d pstates usable (use ACPI driver for full range\n",

drivers/cpufreq/powernv-cpufreq.c

246

pr_warn("power-mgt node not found\n");

drivers/cpufreq/powernv-cpufreq.c

251

pr_warn("ibm,pstate-min node not found\n");

drivers/cpufreq/powernv-cpufreq.c

256

pr_warn("ibm,pstate-max node not found\n");

drivers/cpufreq/powernv-cpufreq.c

262

pr_warn("ibm,pstate-nominal not found\n");

drivers/cpufreq/powernv-cpufreq.c

291

pr_warn("ibm,pstate-ids not found\n");

drivers/cpufreq/powernv-cpufreq.c

298

pr_warn("ibm,pstate-frequencies-mhz not found\n");

drivers/cpufreq/powernv-cpufreq.c

303

pr_warn("Entries in ibm,pstate-ids and "

drivers/cpufreq/powernv-cpufreq.c

309

pr_warn("No PStates found\n");

drivers/cpufreq/powernv-cpufreq.c

369

pr_warn("PState id 0x%x outside of PState table, reporting nominal id 0x%x instead\n",

drivers/cpufreq/powernv-cpufreq.c

605

pr_warn("CPU Frequency could be throttled\n");

drivers/cpufreq/powernv-cpufreq.c

969

pr_warn("CPU frequency is throttled for duration\n");

drivers/cpufreq/scmi-cpufreq.c

193

pr_warn("failed to update freq constraint: %d\n", ret);

drivers/cpufreq/speedstep-lib.c

457

pr_warn("frequency transition measured seems out of range (%u nSec), falling back to a safe one of %u nSec\n",

drivers/cpufreq/sun50i-cpufreq-nvmem.c

118

pr_warn("sun50i-cpufreq-nvmem: unknown speed bin 0x%x, using default bin 0\n",

drivers/cpufreq/tegra194-cpufreq.c

177

pr_warn("cpufreq: problem with refclk on cpu:%d, delta_refcnt:%u, cnt:%d\n",

drivers/cpufreq/tegra194-cpufreq.c

267

pr_warn("cpufreq: problem with refclk on cpu:%d, delta_refcnt:%u, cnt:%d\n",

drivers/cpufreq/tegra194-cpufreq.c

413

pr_warn("cpufreq: cpu%d,cur:%u,set:%u,delta:%d,set ndiv:%llu\n",

drivers/cpuidle/cpuidle-powernv.c

262

pr_warn("cpuidle-powernv : Only Snooze is available\n");

drivers/cpuidle/cpuidle-powernv.c

274

pr_warn("cpuidle-powernv: discovered idle states more than allowed");

drivers/cpuidle/cpuidle-psci.c

215

pr_warn("Failed %d while setup cpuhp state\n", err);

drivers/cpuidle/cpuidle-psci.c

237

pr_warn("%pOF missing arm,psci-suspend-param property\n", np);

drivers/cpuidle/cpuidle-psci.c

242

pr_warn("Invalid PSCI power state %#x\n", *state);

drivers/cpuidle/cpuidle-pseries.c

389

pr_warn("cpuidle: Skipping xcede record %d [hint=%d]. Exit latency = 0us\n",

drivers/cpuidle/cpuidle-riscv-sbi.c

182

pr_warn("Failed %d while setup cpuhp state\n", err);

drivers/cpuidle/cpuidle-riscv-sbi.c

196

pr_warn("%pOF missing riscv,sbi-suspend-param property\n", np);

drivers/cpuidle/cpuidle-riscv-sbi.c

201

pr_warn("Invalid SBI suspend state %#x\n", *state);

drivers/cpuidle/driver.c

205

pr_warn("Idle state %d target residency too low\n", i);

drivers/cpuidle/dt_idle_states.c

183

pr_warn("%pOF idle state not valid, bailing out\n",

drivers/cpuidle/dt_idle_states.c

190

pr_warn("State index reached static CPU idle driver states array size\n");

drivers/crypto/caam/caamalg.c

3923

pr_warn("%s alg registration failed\n",

drivers/crypto/caam/caamalg.c

3975

pr_warn("%s alg registration failed\n",

drivers/crypto/caam/caamalg_qi.c

2730

pr_warn("%s alg registration failed\n",

drivers/crypto/caam/caamhash.c

1997

pr_warn("%s alg allocation failed\n",

drivers/crypto/caam/caamhash.c

2004

pr_warn("%s alg registration failed: %d\n",

drivers/crypto/caam/caamhash.c

2018

pr_warn("%s alg allocation failed\n", alg->driver_name);

drivers/crypto/caam/caamhash.c

2024

pr_warn("%s alg registration failed: %d\n",

drivers/crypto/ccp/ccp-crypto-aes-xts.c

208

pr_warn("could not load fallback driver xts(aes)\n");

drivers/crypto/ccp/ccp-crypto-sha.c

339

pr_warn("could not load driver %s need for HMAC support\n",

drivers/crypto/ccp/sev-dev-tsm.c

355

pr_warn("SEV-TIO STATUS failed with %d\n", ret);

drivers/crypto/ccp/sev-dev.c

693

pr_warn("Failed to allocate bounce buffer for SEV legacy command.\n");

drivers/crypto/ccp/sev-dev.c

705

pr_warn("Error moving pages to firmware-owned state for SEV legacy command.\n");

drivers/crypto/ccp/sev-dev.c

723

pr_warn("Failed to reclaim firmware-owned pages while issuing SEV legacy command.\n");

drivers/crypto/intel/iaa/iaa_crypto_main.c

1044

pr_warn("%s: falling back to deflate-generic decompress, "

drivers/crypto/intel/iaa/iaa_crypto_main.c

1437

pr_warn("%s: falling back to deflate-generic decompress, "

drivers/crypto/intel/iaa/iaa_crypto_main.c

1899

pr_warn("debugfs init failed, stats not available\n");

drivers/crypto/intel/qat/qat_common/adf_gen4_vf_mig.c

222

pr_warn("QAT: Unable to determine the version of VF\n");

drivers/crypto/nx/nx-842.c

309

pr_warn("internal error, ignore is set %x\n", ignore);

drivers/crypto/nx/nx-common-powernv.c

887

pr_warn("Firmware doesn't support NX initialization\n");

drivers/cxl/acpi.c

299

pr_warn("QTG ID %u greater than MAX %u\n",

drivers/cxl/core/cdat.c

139

pr_warn("Malformed DSLBIS table length: (%u:%u)\n", size, len);

drivers/cxl/core/cdat.c

156

pr_warn("No matching DSMAS entry for DSLBIS entry.\n");

drivers/cxl/core/cdat.c

65

pr_warn("Malformed DSMAS table length: (%u:%u)\n", size, len);

drivers/dma-buf/heaps/cma_heap.c

431

pr_warn("Failed to add CMA heap %s", cma_get_name(cma));

drivers/dma/dmatest.c

1005

pr_warn("Failed to create thread %s-%s%u\n",

drivers/dma/dmatest.c

1030

pr_warn("No memory for %s\n", dma_chan_name(chan));

drivers/dma/dmatest.c

1040

pr_warn("DMA_COMPLETION_NO_ORDER, polled disabled\n");

drivers/dma/dmatest.c

385

pr_warn("%s: srcbuf[0x%x] overwritten! Expected %02x, got %02x\n",

drivers/dma/dmatest.c

389

pr_warn("%s: dstbuf[0x%x] not copied! Expected %02x, got %02x\n",

drivers/dma/dmatest.c

392

pr_warn("%s: dstbuf[0x%x] was copied! Expected %02x, got %02x\n",

drivers/dma/dmatest.c

395

pr_warn("%s: dstbuf[0x%x] mismatch! Expected %02x, got %02x\n",

drivers/dma/dmatest.c

427

pr_warn("%s: %u errors suppressed\n",

drivers/dma/dmatest.c

992

pr_warn("No memory for %s-%s%u\n",

drivers/dma/idxd/init.c

1335

pr_warn("idxd driver failed to load without MOVDIR64B.\n");

drivers/dma/idxd/init.c

1340

pr_warn("Platform does not have ENQCMD(S) support.\n");

drivers/dma/nbpfaxi.c

484

pr_warn("%s(): invalid bus width %u\n", __func__, width);

drivers/dma/ti/omap-dma.c

1809

pr_warn("OMAP-DMA: failed to register slave DMA engine device: %d\n",

drivers/dma/ti/omap-dma.c

1826

pr_warn("OMAP-DMA: failed to register DMA controller\n");

drivers/edac/a72_edac.c

198

pr_warn("failed to find device node for CPU %d\n", cpu);

drivers/edac/amd64_edac.c

4109

pr_warn("%s(): Unable to create PCI control\n", __func__);

drivers/edac/amd64_edac.c

4110

pr_warn("%s(): PCI error report via EDAC not set\n", __func__);

drivers/edac/armada_xp_edac.c

608

pr_warn("Armada XP EDAC drivers fail to register\n");

drivers/edac/fsl_ddr_edac.c

576

pr_warn("%s: No ECC DIMMs discovered\n", __func__);

drivers/edac/mpc85xx_edac.c

693

pr_warn(EDAC_MOD_STR "drivers fail to register\n");

drivers/firmware/arm_scmi/bus.c

65

pr_warn("SCMI Raw mode active. Rejecting '%s'/0x%02X\n",

drivers/firmware/arm_scmi/driver.c

285

pr_warn("Problem loading module for protocol 0x%x\n",

drivers/firmware/arm_scmi/driver.c

316

pr_warn("SCMI Protocol 0x%x not found!\n", protocol_id);

drivers/firmware/arm_sdei.c

1003

pr_warn("Failed to register reboot notifier...\n");

drivers/firmware/arm_sdei.c

1010

pr_warn("Failed to register CPU hotplug notifier...\n");

drivers/firmware/arm_sdei.c

1112

pr_warn("still in SDEI critical event context, attempting to finish handler.\n");

drivers/firmware/arm_sdei.c

1117

pr_warn("still in SDEI normal event context, attempting to finish handler.\n");

drivers/firmware/arm_sdei.c

497

pr_warn("Event %u not registered\n", event_num);

drivers/firmware/arm_sdei.c

578

pr_warn("Event %u already registered\n", event_num);

drivers/firmware/arm_sdei.c

586

pr_warn("Failed to create event %u: %d\n", event_num, err);

drivers/firmware/arm_sdei.c

604

pr_warn("Failed to register event %u: %d\n", event_num, err);

drivers/firmware/arm_sdei.c

782

pr_warn("Failed to re-register shared events...\n");

drivers/firmware/arm_sdei.c

790

pr_warn("Failed to re-register CPU hotplug notifier...\n");

drivers/firmware/arm_sdei.c

931

pr_warn("missing \"method\" property\n");

drivers/firmware/arm_sdei.c

943

pr_warn("invalid \"method\" property: %s\n", method);

drivers/firmware/arm_sdei.c

979

pr_warn("Conflicting SDEI version detected.\n");

drivers/firmware/arm_sdei.c

997

pr_warn("Failed to register CPU PM notifier...\n");

drivers/firmware/broadcom/bcm47xx_nvram.c

116

pr_warn("nvram already initialized\n");

drivers/firmware/broadcom/bcm47xx_nvram.c

79

pr_warn("nvram already initialized\n");

drivers/firmware/broadcom/bcm47xx_sprom.c

109

pr_warn("can not parse nvram name %s%s with value %s got %i\n",

drivers/firmware/broadcom/bcm47xx_sprom.c

130

pr_warn("can not parse nvram name %s%s with value %s got %i\n",

drivers/firmware/broadcom/bcm47xx_sprom.c

154

pr_warn("Can not parse mac address: %s\n", buf);

drivers/firmware/broadcom/bcm47xx_sprom.c

169

pr_warn("alpha2 is too long %s\n", buf);

drivers/firmware/broadcom/bcm47xx_sprom.c

611

pr_warn("Unable to fill SPROM for given bustype.\n");

drivers/firmware/broadcom/bcm47xx_sprom.c

686

pr_warn("Unable to fill SPROM for given bustype.\n");

drivers/firmware/broadcom/bcm47xx_sprom.c

714

pr_warn("Failed to register ssb SPROM handler\n");

drivers/firmware/broadcom/bcm47xx_sprom.c

719

pr_warn("Failed to register bcma SPROM handler\n");

drivers/firmware/broadcom/bcm47xx_sprom.c

81

pr_warn("can not parse nvram name %s%s%s with value %s got %i\n", \

drivers/firmware/dmi_scan.c

110

pr_warn(FW_BUG

drivers/firmware/dmi_scan.c

443

pr_warn(FW_BUG "Too many DIMM entries in SMBIOS table\n");

drivers/firmware/efi/arm-runtime.c

71

pr_warn(" EFI remap %pa: failed to create mapping (%d)\n",

drivers/firmware/efi/capsule.c

168

pr_warn("Capsule update raced with reboot, aborting.\n");

drivers/firmware/efi/efi-init.c

100

pr_warn("Unable to map EFI system table.\n");

drivers/firmware/efi/efi-init.c

121

pr_warn("Unable to map EFI config table array.\n");

drivers/firmware/efi/efi.c

106

pr_warn("need at least one option\n");

drivers/firmware/efi/efi.c

267

pr_warn("efivar_ssdt: name too long: %s\n", str);

drivers/firmware/efi/efi.c

385

pr_warn("More then %d EFI boot service segments, only showing first %d in debugfs\n",

drivers/firmware/efi/embedded-firmware.c

127

pr_warn("Warning %s called while we did not check for embedded fw\n",

drivers/firmware/efi/esrt.c

258

pr_warn("ESRT header is not in the memory map.\n");

drivers/firmware/efi/memattr.c

118

pr_warn("Entry covers multiple EFI memory map regions\n");

drivers/firmware/efi/memattr.c

123

pr_warn("Entry type deviates from EFI memory map region type\n");

drivers/firmware/efi/memattr.c

132

pr_warn("No matching entry found in the EFI memory map\n");

drivers/firmware/efi/memattr.c

38

pr_warn("Unexpected EFI Memory Attributes table version %d\n",

drivers/firmware/efi/memattr.c

53

pr_warn(FW_BUG "Corrupted EFI Memory Attributes Table detected! (version == %u, desc_size == %u, num_entries == %u)\n",

drivers/firmware/efi/memattr.c

81

pr_warn("Entry type should be RuntimeServiceCode/Data\n");

drivers/firmware/efi/memattr.c

95

pr_warn("Entry address region misaligned\n");

drivers/firmware/efi/mokvar-table.c

122

pr_warn("EFI MOKvar config table is not within the EFI memory map\n");

drivers/firmware/efi/runtime-wrappers.c

516

pr_warn("failed to invoke the reset_system() runtime service:\n"

drivers/firmware/efi/sysfb_efi.c

377

pr_warn("of_pci_range_parser_init() failed: %d\n", err);

drivers/firmware/efi/tpm.c

75

pr_warn(FW_BUG "TPM Final Events table invalid\n");

drivers/firmware/efi/vars.c

72

pr_warn("efivars already registered\n");

drivers/firmware/google/framebuffer-coreboot.c

83

pr_warn("coreboot: could not register framebuffer\n");

drivers/firmware/psci/psci.c

294

pr_warn("missing \"method\" property\n");

drivers/firmware/psci/psci.c

303

pr_warn("invalid \"method\" property: %s\n", method);

drivers/firmware/psci/psci.c

622

pr_warn("MIGRATE_INFO_UP_CPU reported invalid physical ID (0x%lx)\n",

drivers/firmware/psci/psci_checker.c

392

pr_warn("cpuidle not available on CPU %d, ignoring\n",

drivers/firmware/psci/psci_checker.c

482

pr_warn("Could not start suspend tests on any CPU\n");

drivers/firmware/psci/psci_checker.c

51

pr_warn("Missing PSCI operations, aborting tests\n");

drivers/firmware/psci/psci_checker.c

67

pr_warn("UP Trusted OS resides on no online CPU\n");

drivers/firmware/qemu_fw_cfg.c

591

pr_warn("fw_cfg: failed to write vmcoreinfo");

drivers/firmware/smccc/kvm_guest.c

103

pr_warn("Failed to set target implementation CPUs\n");

drivers/firmware/smccc/kvm_guest.c

73

pr_warn("Unsupported target CPU implementation version v%d.%d\n",

drivers/firmware/smccc/kvm_guest.c

79

pr_warn("No target implementation CPUs specified\n");

drivers/firmware/smccc/kvm_guest.c

86

pr_warn("Not enough memory for struct target_impl_cpu\n");

drivers/firmware/smccc/kvm_guest.c

94

pr_warn("Discovering target implementation CPUs failed\n");

drivers/firmware/smccc/soc_id.c

96

pr_warn(FW_BUG "Ignoring improperly formatted name\n");

drivers/firmware/stratix10-svc.c

509

pr_warn("it shouldn't happen\n");

drivers/firmware/stratix10-svc.c

717

pr_warn("it shouldn't happen\n");

drivers/firmware/stratix10-svc.c

767

pr_warn("it shouldn't happen\n");

drivers/firmware/stratix10-svc.c

802

pr_warn("Secure firmware doesn't support...\n");

drivers/firmware/xilinx/zynqmp.c

1244

pr_warn("The requested pinctrl feature is not supported in the current firmware.\n"

drivers/firmware/xilinx/zynqmp.c

626

pr_warn("%s missing \"method\" property\n", __func__);

drivers/firmware/xilinx/zynqmp.c

635

pr_warn("%s Invalid \"method\" property: %s\n",

drivers/fpga/altera-cvp.c

691

pr_warn("Can't create sysfs chkcfg file\n");

drivers/gpib/common/gpib_os.c

2116

pr_warn("gpib: Warning: deregistered interface %s in use\n",

drivers/gpib/eastwood/fluke_gpib.c

633

pr_warn("fluke_gpib: timeout waiting for dma to transfer end data byte.\n");

drivers/gpio/gpio-aggregator.c

1618

pr_warn("Deferred probe canceled for creation via configfs.\n");

drivers/gpio/gpio-viperboard.c

462

pr_warn("invalid gpioa_freq (%d)\n", gpioa_freq);

drivers/gpio/gpio-winbond.c

509

pr_warn("GPIO1 pins were connected to something else (%.2x), fixing\n",

drivers/gpio/gpio-winbond.c

523

pr_warn("disabling GPIO2.5 and GPIO2.6 as I2C is enabled\n");

drivers/gpio/gpio-winbond.c

539

pr_warn("enabled GPIO%u share pins with active %s\n",

drivers/gpio/gpio-winbond.c

542

pr_warn("disabling GPIO%u as %s is enabled\n",

drivers/gpio/gpio-winbond.c

624

pr_warn("unknown ports (%lx) enabled in GPIO ports bitmask\n",

drivers/gpio/gpiolib-of.c

163

pr_warn("%s GPIO handle specifies active low - ignored\n",

drivers/gpio/gpiolib-of.c

801

pr_warn("GPIO line %d (%pOFn): no hogging state specified, bailing out\n",

drivers/gpio/gpiolib-sysfs.c

904

pr_warn("%s: invalid GPIO\n", __func__);

drivers/gpio/gpiolib-sysfs.c

976

pr_warn("%s: invalid GPIO\n", __func__);

drivers/gpio/gpiolib.c

383

pr_warn("%s: invalid GPIO (errorpointer: %pe)\n", func, desc);

drivers/gpu/drm/amd/amdgpu/amdgpu_afmt.c

77

pr_warn("Calculated ACR N value is too small. You may experience audio problems.\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_afmt.c

79

pr_warn("Calculated ACR N value is too large. You may experience audio problems.\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_atpx_handler.c

219

pr_warn("ATPX Hybrid Graphics, forcing to ATPX\n");

drivers/gpu/drm/amd/amdgpu/amdgpu_pmu.c

570

pr_warn("Error initializing AMDGPU %s PMUs.\n",

drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c

1022

pr_warn("No suitable DMA available\n");

drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c

1137

pr_warn("No suitable DMA available\n");

drivers/gpu/drm/amd/amdkfd/kfd_chardev.c

3197

pr_warn("Failed to create sysfs entry for the kfd_process");

drivers/gpu/drm/amd/amdkfd/kfd_crat.c

1346

pr_warn("Unknown subtype %d in CRAT\n",

drivers/gpu/drm/amd/amdkfd/kfd_crat.c

1378

pr_warn("Error device list should be empty\n");

drivers/gpu/drm/amd/amdkfd/kfd_crat.c

1725

pr_warn("dummy cache info is used temporarily and real cache info need update later.\n");

drivers/gpu/drm/amd/amdkfd/kfd_crat.c

1905

pr_warn("DSDT table not found for OEM information\n");

drivers/gpu/drm/amd/amdkfd/kfd_crat.c

2031

pr_warn("SRAT table not found\n");

drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c

1924

pr_warn("Can't create new kernel queue because %d queues were already created\n",

drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c

1977

pr_warn("Can't create new usermode queue because %d queues were already created\n",

drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c

2834

pr_warn("Resetting wave fronts (cpsch) on dev %p\n", dqm->dev);

drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c

635

pr_warn("Can't create new usermode queue because %d queues were already created\n",

drivers/gpu/drm/amd/amdkfd/kfd_device_queue_manager.c

894

pr_warn("Resetting wave fronts (nocpsch) on dev %p\n",

drivers/gpu/drm/amd/amdkfd/kfd_events.c

204

pr_warn("Signal event wasn't created because out of kernel memory\n");

drivers/gpu/drm/amd/amdkfd/kfd_mqd_manager_v12_1.c

270

pr_warn("Invalid metadata ring size, metadata queue will be ignored\n");

drivers/gpu/drm/amd/amdkfd/kfd_process.c

388

pr_warn("Could not create procfs proc folder");

drivers/gpu/drm/amd/amdkfd/kfd_process.c

535

pr_warn("Creating proc/<pid>/queues/%u failed",

drivers/gpu/drm/amd/amdkfd/kfd_process.c

558

pr_warn("Create sysfs %s/%s failed %d", kobj->name, name, ret);

drivers/gpu/drm/amd/amdkfd/kfd_process.c

591

pr_warn("Creating KFD proc/stats_%s folder failed",

drivers/gpu/drm/amd/amdkfd/kfd_process.c

637

pr_warn("Creating KFD proc/%s folder failed",

drivers/gpu/drm/amd/amdkfd/kfd_process.c

833

pr_warn("kobject already exists for the kfd_process\n");

drivers/gpu/drm/amd/amdkfd/kfd_process.c

839

pr_warn("Creating procfs kobject failed");

drivers/gpu/drm/amd/amdkfd/kfd_process.c

859

pr_warn("Creating procfs pid directory failed");

drivers/gpu/drm/amd/amdkfd/kfd_process.c

870

pr_warn("Creating KFD proc/queues folder failed");

drivers/gpu/drm/amd/amdkfd/kfd_process.c

947

pr_warn("no gpu node! Cannot create KFD process");

drivers/gpu/drm/amd/amdkfd/kfd_process.c

974

pr_warn("Failed to create sysfs entry for the kfd_process");

drivers/gpu/drm/amd/amdkfd/kfd_process_queue_manager.c

442

pr_warn("process pid %d DQM create queue type %d failed. ret %d\n",

drivers/gpu/drm/amd/amdkfd/kfd_svm.c

2550

pr_warn("Freeing queue vital buffer 0x%lx, queue evicted\n",

drivers/gpu/drm/amd/amdkfd/kfd_topology.c

1805

pr_warn("no cache info found\n");

drivers/gpu/drm/amd/amdkfd/kfd_topology.c

2354

pr_warn("Invalid NUMA Node. Use online CPU mask\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/pp_psm.c

48

pr_warn("Please check whether power state management is supported on this asic\n");

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_hwmgr.c

5054

pr_warn("max sclk supported by vbios is %d\n",

drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_hwmgr.c

5107

pr_warn("max mclk supported by vbios is %d\n",

drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c

778

pr_warn("CAC Leakage Table does not exist, using vddc.\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c

789

pr_warn("Index from SCLK/VDDC Dependency Table exceeds the CAC Leakage Table index, using maximum index from CAC table.\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c

805

pr_warn("Index from SCLK/VDDC Dependency Table exceeds the CAC Leakage Table index in second look up, using maximum index from CAC table.");

drivers/gpu/drm/amd/pm/powerplay/smumgr/ci_smumgr.c

814

pr_warn("Unable to get std_vddc from SCLK/VDDC Dependency Table, using vddc.\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/fiji_smumgr.c

2335

pr_warn("can't get the offset of type %x member %x\n", type, member);

drivers/gpu/drm/amd/pm/powerplay/smumgr/fiji_smumgr.c

2360

pr_warn("can't get the mac of %x\n", value);

drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c

2250

pr_warn("can't get the offset of type %x member %x\n", type, member);

drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c

2274

pr_warn("can't get the mac of %x\n", value);

drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c

300

pr_warn("Unknown V.I. Device ID.\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c

545

pr_warn("CAC Leakage Table does not exist, using vddc.\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c

561

pr_warn("Index from SCLK/VDDC Dependency Table exceeds the CAC Leakage Table index, using maximum index from CAC table.\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c

581

pr_warn("Index from SCLK/VDDC Dependency Table exceeds the CAC Leakage Table index in second look up, using maximum index from CAC table.");

drivers/gpu/drm/amd/pm/powerplay/smumgr/iceland_smumgr.c

590

pr_warn("Unable to get std_vddc from SCLK/VDDC Dependency Table, using vddc.\n");

drivers/gpu/drm/amd/pm/powerplay/smumgr/polaris10_smumgr.c

2460

pr_warn("can't get the offset of type %x member %x\n", type, member);

drivers/gpu/drm/amd/pm/powerplay/smumgr/polaris10_smumgr.c

2488

pr_warn("can't get the mac of %x\n", value);

drivers/gpu/drm/amd/pm/powerplay/smumgr/tonga_smumgr.c

2646

pr_warn("can't get the offset of type %x member %x\n", type, member);

drivers/gpu/drm/amd/pm/powerplay/smumgr/tonga_smumgr.c

2670

pr_warn("can't get the mac value %x\n", value);

drivers/gpu/drm/amd/pm/powerplay/smumgr/vegam_smumgr.c

2195

pr_warn("can't get the offset of type %x member %x\n", type, member);

drivers/gpu/drm/amd/pm/powerplay/smumgr/vegam_smumgr.c

326

pr_warn("can't get the mac of %x\n", value);

drivers/gpu/drm/bridge/analogix/anx7625.c

882

pr_warn("downstream not support HDCP 1.4, cap(%x).\n", bcap);

drivers/gpu/drm/bridge/analogix/anx7625.c

906

pr_warn("prepare HDCP key failed.\n");

drivers/gpu/drm/bridge/parade-ps8622.c

78

pr_warn("PS8622 I2C write (0x%02x,0x%02x,0x%02x) failed: %d\n",

drivers/gpu/drm/drm_panic.c

1076

pr_warn("Unsupported value for CONFIG_DRM_PANIC_SCREEN ('%s'), falling back to 'user'...\n",

drivers/gpu/drm/etnaviv/etnaviv_flop_reset.c

158

pr_warn("Etnaviv: model: 0x%04x, revision: 0x%04x does not support PIPE_3D\n",

drivers/gpu/drm/etnaviv/etnaviv_flop_reset.c

160

pr_warn("Request to force PPU flop reset ignored.\n");

drivers/gpu/drm/i915/gem/i915_gem_pm.c

19

pr_warn(DRIVER_NAME ": Missing cache flush in %s\n", __func__)

drivers/gpu/drm/i915/gt/selftest_rps.c

1221

pr_warn("%s: GPU throttled with reasons 0x%08x\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

1231

pr_warn("%s: GPU throttled with reasons 0x%08x\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

1332

pr_warn("%s: GPU throttled with reasons 0x%08x\n",

drivers/gpu/drm/i915/gt/selftest_rps.c

486

pr_warn("%s: GPU throttled with reasons 0x%08x\n",

drivers/gpu/drm/i915/gt/selftest_tlb.c

274

pr_warn("Failed to allocate contiguous pages for size %zx\n",

drivers/gpu/drm/i915/i915_module.c

34

pr_warn("i915.modeset=0 is deprecated. Please use the 'nomodeset' kernel parameter instead.\n");

drivers/gpu/drm/i915/i915_module.c

36

pr_warn("i915.modeset=%d is deprecated. Please remove it and the 'nomodeset' kernel parameter instead.\n",

drivers/gpu/drm/i915/selftests/i915_selftest.c

157

pr_warn(DRIVER_NAME "Timed out waiting for gsc_proxy_completion!\n");

drivers/gpu/drm/i915/selftests/i915_selftest.c

181

pr_warn(DRIVER_NAME "Timed out waiting for huc load via GSC!\n");

drivers/gpu/drm/meson/meson_venc.c

1593

pr_warn("%s: GAMMA ADR_RDY timeout\n", __func__);

drivers/gpu/drm/meson/meson_venc.c

1612

pr_warn("%s: GAMMA ADR_RDY timeout\n", __func__);

drivers/gpu/drm/mgag200/mgag200_g200se.c

159

pr_warn("PLL delta too large\n");

drivers/gpu/drm/mgag200/mgag200_g200se.c

260

pr_warn("PLL delta too large\n");

drivers/gpu/drm/msm/adreno/adreno_device.c

182

pr_warn("%pOF: Using legacy qcom,chipid binding!\n", node);

drivers/gpu/drm/msm/adreno/adreno_device.c

202

pr_warn("%pOF: Unknown GPU revision: %"ADRENO_CHIPID_FMT"\n",

drivers/gpu/drm/msm/dp/dp_ctrl.c

386

pr_warn("PUSH_IDLE pattern timedout\n");

drivers/gpu/drm/msm/dsi/dsi_host.c

2311

pr_warn("%s:Invalid response cmd\n", __func__);

drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c

811

pr_warn("PLL turned on before configuring PHY\n");

drivers/gpu/drm/msm/dsi/phy/dsi_phy_10nm.c

893

pr_warn("Turning OFF PHY while PLL is on\n");

drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c

1209

pr_warn("Turning OFF PHY while PLL is on\n");

drivers/gpu/drm/msm/dsi/phy/dsi_phy_7nm.c

985

pr_warn("PLL turned on before configuring PHY\n");

drivers/gpu/drm/msm/hdmi/hdmi_hdcp.c

384

pr_warn("%s: hw_ddc_clean failed\n", __func__);

drivers/gpu/drm/omapdrm/dss/dss.h

56

pr_warn("omapdss " DSS_SUBSYS_NAME ": " format, ##__VA_ARGS__)

drivers/gpu/drm/omapdrm/dss/dss.h

59

pr_warn("omapdss: " format, ##__VA_ARGS__)

drivers/gpu/drm/radeon/evergreen.c

2392

pr_warn("[drm] r600 flush TLB failed\n");

drivers/gpu/drm/radeon/r100.c

1125

pr_warn("Failed to wait GUI idle while programming pipes. Bad things might happen.\n");

drivers/gpu/drm/radeon/r100.c

1281

pr_warn("Failed to wait GUI idle while programming pipes. Bad things might happen.\n");

drivers/gpu/drm/radeon/r100.c

2520

pr_warn("radeon: wait for empty RBBM fifo failed! Bad things might happen.\n");

drivers/gpu/drm/radeon/r300.c

395

pr_warn("Failed to wait GUI idle while programming pipes. Bad things might happen.\n");

drivers/gpu/drm/radeon/r300.c

406

pr_warn("Failed to wait GUI idle while programming pipes. Bad things might happen.\n");

drivers/gpu/drm/radeon/r300.c

409

pr_warn("Failed to wait MC idle while programming pipes. Bad things might happen.\n");

drivers/gpu/drm/radeon/r420.c

101

pr_warn("Failed to wait GUI idle while programming pipes. Bad things might happen.\n");

drivers/gpu/drm/radeon/r420.c

137

pr_warn("Failed to wait GUI idle while programming pipes. Bad things might happen.\n");

drivers/gpu/drm/radeon/r420.c

149

pr_warn("Failed to wait GUI idle while programming pipes. Bad things might happen.\n");

drivers/gpu/drm/radeon/r520.c

89

pr_warn("Failed to wait MC idle while programming pipes. Bad things might happen.\n");

drivers/gpu/drm/radeon/r600.c

1102

pr_warn("[drm] r600 flush TLB failed\n");

drivers/gpu/drm/radeon/radeon_audio.c

520

pr_warn("Calculated ACR N value is too small. You may experience audio problems.\n");

drivers/gpu/drm/radeon/radeon_audio.c

522

pr_warn("Calculated ACR N value is too large. You may experience audio problems.\n");

drivers/gpu/drm/radeon/radeon_clocks.c

118

pr_warn("radeonfb: No ATY,RefCLK property !\n");

drivers/gpu/drm/radeon/radeon_device.c

1374

pr_warn("radeon: No suitable DMA available\n");

drivers/gpu/drm/radeon/radeon_gem.c

158

pr_warn("Set domain without domain !\n");

drivers/gpu/drm/radeon/radeon_test.c

250

pr_warn("Error while testing BO move\n");

drivers/gpu/drm/radeon/radeon_test.c

403

pr_warn("Error while testing ring sync (%d)\n", r);

drivers/gpu/drm/radeon/radeon_test.c

513

pr_warn("Error while testing ring sync (%d)\n", r);

drivers/gpu/drm/radeon/rs400.c

276

pr_warn("rs400: Failed to wait MC idle while programming pipes. Bad things might happen. %08x\n",

drivers/gpu/drm/radeon/rs690.c

57

pr_warn("Failed to wait MC idle while programming pipes. Bad things might happen.\n");

drivers/gpu/drm/radeon/rv515.c

146

pr_warn("Failed to wait GUI idle while resetting GPU. Bad things might happen.\n");

drivers/gpu/drm/radeon/rv515.c

157

pr_warn("Failed to wait GUI idle while resetting GPU. Bad things might happen.\n");

drivers/gpu/drm/radeon/rv515.c

160

pr_warn("Failed to wait MC idle while programming pipes. Bad things might happen.\n");

drivers/gpu/drm/scheduler/sched_entity.c

88

pr_warn("%s: called with uninitialized scheduler\n", __func__);

drivers/gpu/drm/ttm/ttm_device.c

112

pr_warn("Using GFP_DMA32 fallback for dummy_read_page\n");

drivers/gpu/host1x/cdma.c

533

pr_warn("%s: CDMA still running\n", __func__);

drivers/hid/bpf/hid_bpf_dispatch.c

665

pr_warn("error while setting HID BPF tracing kfuncs: %d", err);

drivers/hid/bpf/hid_bpf_dispatch.c

671

pr_warn("error while setting HID BPF syscall kfuncs: %d", err);

drivers/hid/hid-asus.c

341

pr_warn("Failed to notify asus-wmi: %d\n", err);

drivers/hid/hid-asus.c

346

pr_warn("Failed to notify asus-wmi (retval): 0x%x\n", retval);

drivers/hid/hid-cougar.c

100

pr_warn("cougar: no mappings defined for G6/spacebar");

drivers/hid/hid-logitech-dj.c

905

pr_warn("%s: delayedwork queued before hidpp interface was enumerated\n",

drivers/hid/hid-quirks.c

1258

pr_warn("Could not parse HID quirk module param %s\n",

drivers/hid/hid-roccat.c

428

pr_warn("can't get major number\n");

drivers/hid/hid-roccat.c

438

pr_warn("cannot add cdev\n");

drivers/hid/hidraw.c

676

pr_warn("can't get major number\n");

drivers/hv/channel.c

890

pr_warn("Fail to set mem host visibility in GPADL teardown %d.\n", ret);

drivers/hv/channel_mgmt.c

1645

pr_warn("timed out waiting for all boot-time offers to be delivered.\n");

drivers/hv/hv_balloon.c

1062

pr_warn("Received Unknown type: %d\n", info_hdr->type);

drivers/hv/hv_balloon.c

1515

pr_warn("Currently ballooning\n");

drivers/hv/hv_balloon.c

1535

pr_warn("Currently hot-adding\n");

drivers/hv/hv_balloon.c

2024

pr_warn("Ballooned pages: %d\n", dm->num_pages_ballooned);

drivers/hv/hv_snapshot.c

201

pr_warn("VSS: failed to communicate to the daemon: %d\n", rc);

drivers/hv/hv_snapshot.c

376

pr_warn("Integration service 'Backup (volume snapshot)'"

drivers/hv/hv_snapshot.c

401

pr_warn("VSS: Failed to initialize transport\n");

drivers/hv/hv_snapshot.c

98

pr_warn("VSS: timeout waiting for daemon to reply\n");

drivers/hv/hv_utils_transport.c

197

pr_warn("%s: spurious message received!\n", __func__);

drivers/hv/hv_utils_transport.c

212

pr_warn("%s: unexpected netlink message!\n", __func__);

drivers/hwmon/abituguru.c

494

pr_warn("bank1-sensor: %d reading (%d) too close to limits, "

drivers/hwmon/abituguru3.c

1249

pr_warn("this motherboard was not detected using DMI. "

drivers/hwmon/applesmc.c

1223

pr_warn("driver init failed (ret=%d)!\n", ret);

drivers/hwmon/applesmc.c

1314

pr_warn("supported laptop not found!\n");

drivers/hwmon/applesmc.c

1394

pr_warn("driver init failed (ret=%d)!\n", ret);

drivers/hwmon/applesmc.c

259

pr_warn("%.4s: read arg fail\n", key);

drivers/hwmon/applesmc.c

265

pr_warn("%.4s: read len fail\n", key);

drivers/hwmon/applesmc.c

272

pr_warn("%.4s: read data[%d] fail\n", key, i);

drivers/hwmon/applesmc.c

287

pr_warn("flushed %d bytes, last value is: %d\n", i, data);

drivers/hwmon/applesmc.c

302

pr_warn("%s: write arg fail\n", key);

drivers/hwmon/applesmc.c

307

pr_warn("%.4s: write len fail\n", key);

drivers/hwmon/applesmc.c

313

pr_warn("%s: write data fail\n", key);

drivers/hwmon/applesmc.c

535

pr_warn("failed to init the device\n");

drivers/hwmon/applesmc.c

581

pr_warn("key count changed from %d to %d\n",

drivers/hwmon/dell-smm-hwmon.c

1752

pr_warn("Enabling fan support despite BIOS bugs\n");

drivers/hwmon/dell-smm-hwmon.c

1761

pr_warn("Enabling fan type call despite BIOS bugs\n");

drivers/hwmon/dell-smm-hwmon.c

1807

pr_warn("Forcing legacy SMM calls on a possibly incompatible machine\n");

drivers/hwmon/f71805f.c

1588

pr_warn("Device not activated, skipping\n");

drivers/hwmon/f71805f.c

1594

pr_warn("Base address not set, skipping\n");

drivers/hwmon/f71882fg.c

2590

pr_warn("Device not activated\n");

drivers/hwmon/f71882fg.c

2597

pr_warn("Base address not set\n");

drivers/hwmon/gpd-fan.c

688

pr_warn("Failed to create platform device\n");

drivers/hwmon/hwmon-vid.c

152

pr_warn("Requested unsupported VRM version (%u)\n",

drivers/hwmon/nct6683.c

1409

pr_warn("Forcibly enabling EC access. Data may be unusable.\n");

drivers/hwmon/nct6775-platform.c

1065

pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n");

drivers/hwmon/pc87360.c

1759

pr_warn("PC8736x not detected, module not inserted\n");

drivers/hwmon/pc87360.c

1772

pr_warn("No active logical device, module not inserted\n");

drivers/hwmon/pc87427.c

1223

pr_warn("Logical device 0x%02x is memory-mapped, can't use\n",

drivers/hwmon/pcf8591.c

305

pr_warn("invalid input_mode (%d)\n", input_mode);

drivers/hwmon/sch56xx-common.c

171

pr_warn("EC reports: 0x%02x reading virtual register 0x%04hx\n",

drivers/hwmon/sch56xx-common.c

507

pr_warn("Watchdog not enabled by BIOS, not registering\n");

drivers/hwmon/sch56xx-common.c

584

pr_warn("Device not activated\n");

drivers/hwmon/sch56xx-common.c

596

pr_warn("Base address not set\n");

drivers/hwmon/smsc47m1.c

619

pr_warn("Failed to disable device\n");

drivers/hwmon/vt1211.c

1302

pr_warn("HW monitor is disabled, skipping\n");

drivers/hwmon/vt1211.c

1309

pr_warn("Base address is not set, skipping\n");

drivers/hwmon/vt1211.c

1336

pr_warn("Invalid UCH configuration %d. Choose a value between 0 and 31.\n",

drivers/hwmon/vt1211.c

1343

pr_warn("Invalid interrupt mode %d. Only mode 0 is supported.\n",

drivers/hwmon/w83627ehf.c

2100

pr_warn("Forcibly enabling Super-I/O. Sensor is probably unusable.\n");

drivers/hwmon/w83627hf.c

1899

pr_warn("Base address not set, skipping\n");

drivers/hwmon/w83627hf.c

1905

pr_warn("Enabling HWM logical device\n");

drivers/hwspinlock/hwspinlock_core.c

735

pr_warn("hwspinlock %u does not exist\n", id);

drivers/hwspinlock/hwspinlock_core.c

745

pr_warn("hwspinlock %u is already in use\n", id);

drivers/hwtracing/intel_th/gth.c

809

pr_warn("Can't initialize sysfs attributes\n");

drivers/i2c/algos/i2c-algo-bit.c

250

pr_warn("%s: bus seems to be busy (scl=%d, sda=%d)\n", name, scl, sda);

drivers/i2c/algos/i2c-algo-bit.c

256

pr_warn("%s: SDA stuck high!\n", name);

drivers/i2c/algos/i2c-algo-bit.c

260

pr_warn("%s: SCL unexpected low while pulling SDA low!\n", name);

drivers/i2c/algos/i2c-algo-bit.c

266

pr_warn("%s: SDA stuck low!\n", name);

drivers/i2c/algos/i2c-algo-bit.c

270

pr_warn("%s: SCL unexpected low while pulling SDA high!\n", name);

drivers/i2c/algos/i2c-algo-bit.c

276

pr_warn("%s: SCL stuck high!\n", name);

drivers/i2c/algos/i2c-algo-bit.c

280

pr_warn("%s: SDA unexpected low while pulling SCL low!\n", name);

drivers/i2c/algos/i2c-algo-bit.c

286

pr_warn("%s: SCL stuck low!\n", name);

drivers/i2c/algos/i2c-algo-bit.c

290

pr_warn("%s: SDA unexpected low while pulling SCL high!\n", name);

drivers/i2c/busses/i2c-mlxbf.c

1225

pr_warn("Illegal value %d: defaulting to 100 KHz\n",

drivers/i2c/busses/i2c-parport.c

271

pr_warn("adapter type unspecified\n");

drivers/i2c/busses/i2c-parport.c

276

pr_warn("invalid type (%d)\n", type);

drivers/i2c/busses/i2c-pxa.c

1508

pr_warn("i2c: <%s> clock rate not set\n",

drivers/i2c/busses/i2c-viperboard.c

445

pr_warn("invalid i2c_bus_freq (%d)\n", i2c_bus_freq);

drivers/i2c/busses/scx200_acb.c

447

pr_warn("probe failed\n");

drivers/idle/intel_idle.c

2667

pr_warn("failed to initialized sysfs");

drivers/infiniband/core/device.c

3054

pr_warn("Couldn't create InfiniBand device class\n");

drivers/infiniband/core/device.c

3062

pr_warn("Couldn't init IB address resolution\n");

drivers/infiniband/core/device.c

3068

pr_warn("Couldn't init IB MAD\n");

drivers/infiniband/core/device.c

3074

pr_warn("Couldn't init SA\n");

drivers/infiniband/core/device.c

3080

pr_warn("Couldn't register LSM notifier. ret %d\n", ret);

drivers/infiniband/core/device.c

3086

pr_warn("Couldn't init compat dev. ret %d\n", ret);

drivers/infiniband/core/device.c

3094

pr_warn("Couldn't init RoCE GID management\n");

drivers/infiniband/core/iwpm_util.c

449

pr_warn("%s: Unable to put the nlmsg header\n", __func__);

drivers/infiniband/core/iwpm_util.c

484

pr_warn("%s: %s (msg type %s ret = %d)\n",

drivers/infiniband/core/iwpm_util.c

627

pr_warn("%s Unable to put NLMSG_DONE\n", __func__);

drivers/infiniband/core/iwpm_util.c

634

pr_warn("%s Unable to send a nlmsg\n", __func__);

drivers/infiniband/core/iwpm_util.c

735

pr_warn("%s: %s (ret = %d)\n", __func__, err_str, ret);

drivers/infiniband/core/packer.c

107

pr_warn("Structure field %s of size %d bits is not byte-aligned\n",

drivers/infiniband/core/packer.c

134

pr_warn("Field size %d bits not handled\n", size * 8);

drivers/infiniband/core/packer.c

190

pr_warn("Structure field %s of size %d bits is not byte-aligned\n",

drivers/infiniband/core/packer.c

47

pr_warn("Field size %d bits not handled\n", size * 8);

drivers/infiniband/core/sa_query.c

2305

pr_warn("Couldn't query port\n");

drivers/infiniband/core/sa_query.c

2353

pr_warn("Couldn't create new SM AH\n");

drivers/infiniband/core/uverbs_cmd.c

3332

pr_warn("create flow failed, flow %d: %u bytes left from uverb cmd\n",

drivers/infiniband/core/verbs.c

2064

pr_warn("%s speed is unknown, defaulting to %u\n",

drivers/infiniband/core/verbs.c

348

pr_warn("%s: enabling unsafe global rkey\n", caller);

drivers/infiniband/hw/cxgb4/cm.c

1929

pr_warn("Abort rpl to freed endpoint\n");

drivers/infiniband/hw/cxgb4/cm.c

2391

pr_warn("%s stid %d lookup failure!\n", __func__, stid);

drivers/infiniband/hw/cxgb4/cm.c

2409

pr_warn("%s stid %d lookup failure!\n", __func__, stid);

drivers/infiniband/hw/cxgb4/cm.c

2923

pr_warn("%s PEER_ABORT IN DEAD STATE!!!!\n", __func__);

drivers/infiniband/hw/cxgb4/cm.c

3035

pr_warn("TERM received tid %u qpid %u\n", tid,

drivers/infiniband/hw/cxgb4/cm.c

3048

pr_warn("TERM received tid %u no ep/qp\n", tid);

drivers/infiniband/hw/cxgb4/cm.c

3348

pr_warn("%s qpn 0x%x not found!\n", __func__, conn_param->qpn);

drivers/infiniband/hw/cxgb4/cm.c

4099

pr_warn("%s connect request on invalid stid %d\n",

drivers/infiniband/hw/cxgb4/cm.c

4418

pr_warn("Abort on non-existent endpoint, tid %d\n", tid);

drivers/infiniband/hw/cxgb4/cq.c

167

pr_warn("%s: cqid %u not in BAR2 range\n",

drivers/infiniband/hw/cxgb4/device.c

1491

pr_warn("%s: unknown control cmd %u\n",

drivers/infiniband/hw/cxgb4/qp.c

1218

pr_warn("%s post of type=%d TBD!\n", __func__,

drivers/infiniband/hw/cxgb4/qp.c

2582

pr_warn(MOD "%s: srqid %u not in BAR2 range.\n",

drivers/infiniband/hw/cxgb4/qp.c

293

pr_warn("%s: sqid %u or rqid %u not in BAR2 range\n",

drivers/infiniband/hw/cxgb4/resource.c

318

pr_warn("Failed to add all PBL chunks (%x/%x)\n",

drivers/infiniband/hw/cxgb4/resource.c

408

pr_warn("Failed to add all RQT chunks (%x/%x)\n",

drivers/infiniband/hw/cxgb4/resource.c

499

pr_warn("Failed to add all OCQP chunks (%x/%x)\n",

drivers/infiniband/hw/cxgb4/t4.h

737

pr_warn("%s cxgb4 sw cq overflow cqid %u\n",

drivers/infiniband/hw/hfi1/chip.c

8635

pr_warn("%s bad offset 0x%x\n", __func__, off);

drivers/infiniband/hw/hfi1/driver.c

79

pr_warn("Invalid module parameter value for 'cap_mask'\n");

drivers/infiniband/hw/hfi1/driver.c

87

pr_warn("Ignoring non-writable capability bits %#lx\n",

drivers/infiniband/hw/hfi1/mad.c

1011

pr_warn("OPA Get PKey AM Invalid : s 0x%x; req 0x%x; "

drivers/infiniband/hw/hfi1/mad.c

1112

pr_warn("invalid logical state(s) (old %d new %d)\n",

drivers/infiniband/hw/hfi1/mad.c

1133

pr_warn("invalid physical state(s) (old %d new %d)\n",

drivers/infiniband/hw/hfi1/mad.c

1162

pr_warn("invalid logical state transition %s -> %s\n",

drivers/infiniband/hw/hfi1/mad.c

1173

pr_warn("invalid physical state transition %s -> %s\n",

drivers/infiniband/hw/hfi1/mad.c

1219

pr_warn("SubnSet(OPA_PortInfo) port state invalid: logical_state 0x%x physical_state 0x%x\n",

drivers/infiniband/hw/hfi1/mad.c

1244

pr_warn("SubnSet(OPA_PortInfo) invalid physical state 0x%x\n",

drivers/infiniband/hw/hfi1/mad.c

1289

pr_warn("SubnSet(OPA_PortInfo) Cannot move to Active with NeighborNormal 0\n");

drivers/infiniband/hw/hfi1/mad.c

1294

pr_warn("SubnSet(OPA_PortInfo) invalid logical state 0x%x\n",

drivers/infiniband/hw/hfi1/mad.c

1340

pr_warn("OPA_PortInfo lid out of range: %X\n", lid);

drivers/infiniband/hw/hfi1/mad.c

1348

pr_warn("OPA_PortInfo SM lid out of range: %X\n", smlid);

drivers/infiniband/hw/hfi1/mad.c

1377

pr_warn("SubnSet(OPA_PortInfo) lid invalid 0x%x\n",

drivers/infiniband/hw/hfi1/mad.c

1410

pr_warn("SubnSet(OPA_PortInfo) smlid invalid 0x%x\n", smlid);

drivers/infiniband/hw/hfi1/mad.c

1412

pr_warn("SubnSet(OPA_PortInfo) smlid 0x%x\n", smlid);

drivers/infiniband/hw/hfi1/mad.c

1497

pr_warn("SubnSet(OPA_PortInfo) mtu invalid %d (0x%x)\n",

drivers/infiniband/hw/hfi1/mad.c

1531

pr_warn("SubnSet(OPA_PortInfo) VL's supported invalid %d\n",

drivers/infiniband/hw/hfi1/mad.c

1693

pr_warn("OPA Get PKey AM Invalid : P = %u; B = 0x%x; N = 0x%x\n",

drivers/infiniband/hw/hfi1/mad.c

1710

pr_warn("OPA Set PKey AM Invalid : s 0x%x; req 0x%x; avail 0x%x; blk/smp 0x%lx\n",

drivers/infiniband/hw/hfi1/mad.c

2221

pr_warn("OPA SubnGet(VL Arb) AM Invalid : 0x%x\n",

drivers/infiniband/hw/hfi1/mad.c

2265

pr_warn("OPA SubnSet(VL Arb) AM Invalid : 0x%x\n",

drivers/infiniband/hw/hfi1/mad.c

299

pr_warn("%s: failed to find limited mgmt pkey, defaulting 0x%x\n",

drivers/infiniband/hw/hfi1/mad.c

4791

pr_warn("failed to find limited mgmt pkey, defaulting 0x%x\n",

drivers/infiniband/hw/hfi1/mad.c

725

pr_warn("%s bad offset 0x%x\n", __func__, off);

drivers/infiniband/hw/hfi1/mad.c

740

pr_warn("%s bad offset 0x%x\n", __func__, off);

drivers/infiniband/hw/hfi1/mad.c

994

pr_warn("OPA Get PKey AM Invalid : P = %d; B = 0x%x; N = 0x%x\n",

drivers/infiniband/hw/mlx4/cq.c

55

pr_warn("Unexpected event type %d "

drivers/infiniband/hw/mlx4/mad.c

1215

pr_warn("Could not change QP1 subnet prefix for port %d: query_gid error (%d)\n",

drivers/infiniband/hw/mlx4/mad.c

1272

pr_warn("Unsupported subtype 0x%x for "

drivers/infiniband/hw/mlx4/main.c

108

pr_warn("Device managed flow steering is unavailable for IB port in multifunction env.\n");

drivers/infiniband/hw/mlx4/main.c

1967

pr_warn("could not find mgid entry\n");

drivers/infiniband/hw/mlx4/main.c

2867

pr_warn("failure unregistering notifier\n");

drivers/infiniband/hw/mlx4/main.c

2990

pr_warn("failure unregistering notifier\n");

drivers/infiniband/hw/mlx4/main.c

3077

pr_warn("mlx4_ib_handle_catas_error was started\n");

drivers/infiniband/hw/mlx4/main.c

3125

pr_warn("mlx4_ib_handle_catas_error ended\n");

drivers/infiniband/hw/mlx4/mcg.c

48

#define mcg_warn(fmt, arg...) pr_warn("MCG WARNING: " fmt, ##arg)

drivers/infiniband/hw/mlx4/mcg.c

51

pr_warn("%s-%d: %16s (port %d): WARNING: " format, __func__, __LINE__,\

drivers/infiniband/hw/mlx4/qp.c

1396

pr_warn("modify QP %06x to RESET failed.\n",

drivers/infiniband/hw/mlx4/qp.c

1416

pr_warn("modify QP %06x to RESET failed.\n",

drivers/infiniband/hw/mlx4/qp.c

2062

pr_warn("failed to reverse WQN=0x%06x\n",

drivers/infiniband/hw/mlx4/qp.c

2086

pr_warn("failed to reverse WQN=%x\n",

drivers/infiniband/hw/mlx4/qp.c

247

pr_warn("Unexpected event type %d on QP %06x\n",

drivers/infiniband/hw/mlx4/qp.c

2571

pr_warn("INIT_PORT failed for port %d\n",

drivers/infiniband/hw/mlx4/qp.c

4256

pr_warn("WQN=0x%06x failed with reverting HW's resources failure\n",

drivers/infiniband/hw/mlx4/srq.c

63

pr_warn("Unexpected event type %d "

drivers/infiniband/hw/mlx5/cq.c

115

pr_warn("unknown completion status\n");

drivers/infiniband/hw/mlx5/cq.c

1276

pr_warn("resize CQ failed to get resize CQE, CQN 0x%x\n",

drivers/infiniband/hw/mlx5/main.c

1399

pr_warn("invalid mtu\n");

drivers/infiniband/hw/mlx5/qp.c

3867

pr_warn("%s: Rate limit can only be changed when SQ is moving to RDY\n",

drivers/infiniband/hw/mlx5/qp.c

390

pr_warn("mlx5_ib: Unexpected event type %d on QP %06x\n",

drivers/infiniband/hw/mlx5/srq.c

34

pr_warn("mlx5_ib: Unexpected event type %d on SRQ %06x\n",

drivers/infiniband/sw/rxe/rxe_net.c

733

pr_warn("IPv6 is not supported, can not create a UDPv6 socket\n");

drivers/infiniband/sw/rxe/rxe_queue.h

188

pr_warn("%s: attempt to advance client index\n",

drivers/infiniband/sw/rxe/rxe_queue.h

209

pr_warn("%s: attempt to advance driver index\n",

drivers/infiniband/sw/rxe/rxe_queue.h

231

pr_warn("%s: attempt to advance client index\n",

drivers/infiniband/sw/rxe/rxe_queue.h

237

pr_warn("%s: attempt to advance driver index\n",

drivers/infiniband/sw/siw/siw_cm.c

143

pr_warn("siw: cannot restore sk callbacks: no ep\n");

drivers/infiniband/sw/siw/siw_cm.c

147

pr_warn("siw: cannot restore sk callbacks: no sk\n");

drivers/infiniband/sw/siw/siw_cm.c

1508

pr_warn("Setting MPA version to %u\n", MPA_REVISION_2);

drivers/infiniband/sw/siw/siw_main.c

202

pr_warn("siw: no tx cpu found\n");

drivers/infiniband/sw/siw/siw_main.c

73

pr_warn("siw: device registration error %d\n", rv);

drivers/infiniband/sw/siw/siw_qp_rx.c

1023

pr_warn("siw: received ddp version unsupported %d\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

1038

pr_warn("siw: received rdmap version unsupported %d\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

1049

pr_warn("siw: received unknown packet type %u\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

1106

pr_warn("siw: packet intersection: %u : %u\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

112

pr_warn("siw: [QP %u]: %s, len %d, kva 0x%p, rv %d\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

1146

pr_warn("siw: [QP %u]: fence resume: bad status %d\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

1158

pr_warn("siw: [QP %u]: no ORQE\n", qp_id(qp));

drivers/infiniband/sw/siw/siw_qp_rx.c

1432

pr_warn("QP[%u]: RX out of state\n", qp_id(qp));

drivers/infiniband/sw/siw/siw_qp_rx.c

191

pr_warn("siw: [QP %u]: rresp stag: %08x != %08x\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

197

pr_warn("siw: [QP %u]: rresp off: %016llx != %016llx\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

205

pr_warn("siw: [QP %u]: rresp len: %d != %d\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

244

pr_warn("siw: [QP %u]: write stag: %08x != %08x\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

251

pr_warn("siw: [QP %u]: write off: %016llx != %016llx\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

289

pr_warn("siw: [QP %u]: invalid ddp qn %d for send\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

295

pr_warn("siw: [QP %u]: send msn: %u != %u\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

302

pr_warn("siw: [QP %u], send mo: %u != %u\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

41

pr_warn("siw: %s: [QP %u]: bogus addr: %p, %p\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

634

pr_warn("siw: [QP %u]: rreq with mpa len %d\n", qp_id(qp),

drivers/infiniband/sw/siw/siw_qp_rx.c

65

pr_warn("siw: [QP %u]: %s, len %d, page %p, rv %d\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

716

pr_warn("siw: [QP %u]: IRQ exceeded or null, size %d\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

793

pr_warn("siw: [QP %u]: proc RRESP: status %d, op %d\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

803

pr_warn("siw: [QP %u]: ORQ empty, size %d\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

814

pr_warn("siw: [QP %u]: resume RRESP: status %d\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

888

pr_warn("siw: got TERMINATE. layer %d, type %d, code %d\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

896

pr_warn("siw: rx bogus TERM [QN x%08x, MSN x%08x, MO x%08x]\n",

drivers/infiniband/sw/siw/siw_qp_rx.c

982

pr_warn("siw: crc error. in: %08x, own %08x, op %u\n",

drivers/infiniband/sw/siw/siw_qp_tx.c

1294

pr_warn("siw: no tx cpu available\n");

drivers/infiniband/sw/siw/siw_qp_tx.c

941

pr_warn("siw: fastreg: STag 0x%08x unknown\n", sqe->rkey);

drivers/infiniband/sw/siw/siw_qp_tx.c

946

pr_warn("siw: fastreg: STag 0x%08x: bad MR\n", sqe->rkey);

drivers/infiniband/sw/siw/siw_qp_tx.c

952

pr_warn("siw: fastreg: STag 0x%08x unknown\n", sqe->rkey);

drivers/infiniband/sw/siw/siw_qp_tx.c

957

pr_warn("siw: fastreg: PD mismatch\n");

drivers/infiniband/sw/siw/siw_qp_tx.c

962

pr_warn("siw: fastreg: STag 0x%08x already valid\n", sqe->rkey);

drivers/infiniband/sw/siw/siw_verbs.c

66

pr_warn("siw: mmap not page aligned\n");

drivers/infiniband/sw/siw/siw_verbs.c

79

pr_warn("remap_vmalloc_range failed: %lu, %zu\n", vma->vm_pgoff,

drivers/infiniband/ulp/ipoib/ipoib_cm.c

1566

pr_warn("%s: failed to allocate SRQ, error %ld\n",

drivers/infiniband/ulp/ipoib/ipoib_cm.c

882

pr_warn("%s: failed to create CM ID\n", priv->ca->name);

drivers/infiniband/ulp/ipoib/ipoib_cm.c

890

pr_warn("%s: failed to listen on ID 0x%llx\n", priv->ca->name,

drivers/infiniband/ulp/ipoib/ipoib_ib.c

1021

pr_warn("%s: Got unexpected wqe id\n", __func__);

drivers/infiniband/ulp/ipoib/ipoib_ib.c

371

pr_warn("failed(%d) modify QP:0x%x SQE->RTS\n",

drivers/infiniband/ulp/ipoib/ipoib_ib.c

378

pr_warn("QP (%d) will stay in state: %d\n",

drivers/infiniband/ulp/ipoib/ipoib_ib.c

479

pr_warn("%s: Got unexpected wqe id\n", __func__);

drivers/infiniband/ulp/ipoib/ipoib_ib.c

922

pr_warn("%s: Failed to open dev\n", dev->name);

drivers/infiniband/ulp/ipoib/ipoib_main.c

1783

pr_warn("%s: failed to allocate TX ring (%d entries)\n",

drivers/infiniband/ulp/ipoib/ipoib_main.c

1791

pr_warn("%s: ipoib_transport_dev_init failed\n",

drivers/infiniband/ulp/ipoib/ipoib_main.c

1862

pr_warn("%s: failed to allocate device WQ\n", dev->name);

drivers/infiniband/ulp/ipoib/ipoib_main.c

1869

pr_warn("%s: failed to allocate PD\n", priv->ca->name);

drivers/infiniband/ulp/ipoib/ipoib_main.c

1875

pr_warn("%s failed to init HW resource\n", dev->name);

drivers/infiniband/ulp/ipoib/ipoib_main.c

1881

pr_warn("%s failed to init neigh hash\n", dev->name);

drivers/infiniband/ulp/ipoib/ipoib_main.c

1887

pr_warn("%s failed to open device\n", dev->name);

drivers/infiniband/ulp/ipoib/ipoib_main.c

1966

pr_warn("%s: ib_query_port %d failed\n", priv->ca->name,

drivers/infiniband/ulp/ipoib/ipoib_main.c

1974

pr_warn("%s: ib_query_pkey port %d failed (ret = %d)\n",

drivers/infiniband/ulp/ipoib/ipoib_main.c

1981

pr_warn("%s: rdma_query_gid port %d failed (ret = %d)\n",

drivers/infiniband/ulp/ipoib/ipoib_main.c

2049

pr_warn("%s: failed to initialize device: %s port %d (ret = %d)\n",

drivers/infiniband/ulp/ipoib/ipoib_main.c

2591

pr_warn("%s, %d: ipoib_intf_alloc failed %ld\n", hca->name, port,

drivers/infiniband/ulp/ipoib/ipoib_main.c

2610

pr_warn("%s: couldn't register ipoib port %d; error %d\n",

drivers/infiniband/ulp/ipoib/ipoib_verbs.c

181

pr_warn("%s: failed to create receive CQ\n", ca->name);

drivers/infiniband/ulp/ipoib/ipoib_verbs.c

190

pr_warn("%s: failed to create send CQ\n", ca->name);

drivers/infiniband/ulp/ipoib/ipoib_verbs.c

214

pr_warn("%s: failed to create QP\n", ca->name);

drivers/infiniband/ulp/iser/iscsi_iser.h

84

pr_warn(PFX "%s: " fmt, \

drivers/infiniband/ulp/isert/ib_isert.h

24

pr_warn(PFX "%s: " fmt, \

drivers/infiniband/ulp/rtrs/rtrs-log.h

20

rtrs_log(pr_warn, obj, fmt, ##__VA_ARGS__)

drivers/infiniband/ulp/srp/ib_srp.c

3357

pr_warn("invalid id_ext parameter '%s'\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3373

pr_warn("invalid ioc_guid parameter '%s'\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3388

pr_warn("bad dest GID parameter '%s'\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3402

pr_warn("bad P_Key parameter '%s'\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3416

pr_warn("bad service_id parameter '%s'\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3433

pr_warn("bad source parameter '%s'\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3452

pr_warn("bad dest parameter '%s'\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3463

pr_warn("bad max sect parameter '%s'\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3472

pr_warn("match_int() failed for queue_size parameter '%s', Error %d\n",

drivers/infiniband/ulp/srp/ib_srp.c

3477

pr_warn("bad queue_size parameter '%s'\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3491

pr_warn("match_int() failed for max cmd_per_lun parameter '%s', Error %d\n",

drivers/infiniband/ulp/srp/ib_srp.c

3496

pr_warn("bad max cmd_per_lun parameter '%s'\n",

drivers/infiniband/ulp/srp/ib_srp.c

3507

pr_warn("match_int() failed for max target_can_queue parameter '%s', Error %d\n",

drivers/infiniband/ulp/srp/ib_srp.c

3512

pr_warn("bad max target_can_queue parameter '%s'\n",

drivers/infiniband/ulp/srp/ib_srp.c

3523

pr_warn("bad IO class parameter '%s'\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3528

pr_warn("unknown IO class parameter value %x specified (use %x or %x).\n",

drivers/infiniband/ulp/srp/ib_srp.c

3545

pr_warn("bad initiator_ext value '%s'\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3556

pr_warn("match_int() failed for max cmd_sg_entries parameter '%s', Error %d\n",

drivers/infiniband/ulp/srp/ib_srp.c

3561

pr_warn("bad max cmd_sg_entries parameter '%s'\n",

drivers/infiniband/ulp/srp/ib_srp.c

3572

pr_warn("bad allow_ext_sg parameter '%s'\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3581

pr_warn("match_int() failed for max sg_tablesize parameter '%s', Error %d\n",

drivers/infiniband/ulp/srp/ib_srp.c

3586

pr_warn("bad max sg_tablesize parameter '%s'\n",

drivers/infiniband/ulp/srp/ib_srp.c

3597

pr_warn("match_int() failed for comp_vector parameter '%s', Error %d\n",

drivers/infiniband/ulp/srp/ib_srp.c

3602

pr_warn("bad comp_vector parameter '%s'\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3612

pr_warn("match_int() failed for tl_retry_count parameter '%s', Error %d\n",

drivers/infiniband/ulp/srp/ib_srp.c

3617

pr_warn("bad tl_retry_count parameter '%s' (must be a number between 2 and 7)\n",

drivers/infiniband/ulp/srp/ib_srp.c

3628

pr_warn("match_int() failed for max it_iu_size parameter '%s', Error %d\n",

drivers/infiniband/ulp/srp/ib_srp.c

3633

pr_warn("bad maximum initiator to target IU size '%s'\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3643

pr_warn("match_int() failed for channel count parameter '%s', Error %d\n",

drivers/infiniband/ulp/srp/ib_srp.c

3648

pr_warn("bad channel count %s\n", p);

drivers/infiniband/ulp/srp/ib_srp.c

3656

pr_warn("unknown parameter or missing value '%s' in target creation request\n",

drivers/infiniband/ulp/srp/ib_srp.c

3670

pr_warn("target creation request is missing one or more parameters\n");

drivers/infiniband/ulp/srp/ib_srp.c

3674

pr_warn("cmd_per_lun = %d > queue_size = %d\n",

drivers/infiniband/ulp/srp/ib_srp.c

3763

pr_warn("No MR pool and no external indirect descriptors, limiting sg_tablesize to cmd_sg_cnt\n");

drivers/infiniband/ulp/srp/ib_srp.c

4143

pr_warn("srp_sg_tablesize is deprecated, please use cmd_sg_entries\n");

drivers/infiniband/ulp/srp/ib_srp.c

4152

pr_warn("Clamping cmd_sg_entries to 255\n");

drivers/infiniband/ulp/srp/ib_srp.c

4159

pr_warn("Bumping up indirect_sg_entries to match cmd_sg_entries (%u)\n",

drivers/infiniband/ulp/srp/ib_srp.c

4165

pr_warn("Clamping indirect_sg_entries to %u\n",

drivers/infiniband/ulp/srp/ib_srp.c

791

pr_warn("%s: subnet timeout %d may cause SRP login to fail.\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

1485

pr_warn("truncated sense data from %d to %d bytes\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

2822

pr_warn("%s: IB send queue full (needed %d)\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

2925

pr_warn("%s: IB send queue full (needed %d)\n",

drivers/infiniband/ulp/srpt/ib_srpt.c

651

pr_warn("%s-%d: enabling device management failed (%d). Note: this is expected if SR-IOV is enabled.\n",

drivers/input/gameport/gameport.c

385

pr_warn("Can't get module reference, dropping event %d\n",

drivers/input/joystick/gamecon.c

853

pr_warn("Failed to initiate rumble for N64 device %d\n",

drivers/input/misc/apanel.c

271

pr_warn(APANEL ": duplicate entry for devno %u\n",

drivers/input/misc/atlas_btns.c

52

pr_warn("shrugged on unexpected function: function=%x,address=%lx,value=%x\n",

drivers/input/misc/xen-kbdfront.c

102

pr_warn("unhandled keycode 0x%x\n", key->keycode);

drivers/input/misc/xen-kbdfront.c

240

pr_warn("xenkbd: can't request multi-touch");

drivers/input/misc/xen-kbdfront.c

289

pr_warn("xenkbd: can't request abs-pointer\n");

drivers/input/mousedev.c

1080

pr_warn("could not register psaux device, error: %d\n",

drivers/input/serio/hil_mlc.c

795

pr_warn(PREFIX "HIL seems stuck - Disabling HIL MLC.\n");

drivers/input/serio/i8042-acpipnpio.h

1672

pr_warn("PNP: PS/2 controller has invalid data port %#x; using default %#x\n",

drivers/input/serio/i8042-acpipnpio.h

1681

pr_warn("PNP: PS/2 controller has invalid command port %#x; using default %#x\n",

drivers/input/serio/i8042-acpipnpio.h

1688

pr_warn("PNP: PS/2 controller doesn't have KBD irq; using default %d\n",

drivers/input/serio/i8042-acpipnpio.h

1696

pr_warn("PNP: PS/2 appears to have AUX port disabled, "

drivers/input/serio/i8042-acpipnpio.h

1700

pr_warn("PNP: PS/2 controller doesn't have AUX irq; using default %d\n",

drivers/input/serio/i8042.c

1029

pr_warn("Warning: Keylock active\n");

drivers/input/serio/i8042.c

1086

pr_warn("Can't write CTR while resetting\n");

drivers/input/serio/i8042.c

1109

pr_warn("Can't restore CTR\n");

drivers/input/serio/i8042.c

1156

pr_warn("Failed to enable DRITEK extension: %d\n", error);

drivers/input/serio/i8042.c

1192

pr_warn("Can't write CTR to resume, retrying...\n");

drivers/input/serio/i8042.c

1208

pr_warn("failed to resume active multiplexor, mouse won't work\n");

drivers/input/serio/i8042.c

397

pr_warn("Can't write CTR while closing %s port\n", port_name);

drivers/input/serio/i8042.c

852

pr_warn("Failed to disable AUX port, but continuing anyway... Is this a SiS?\n");

drivers/input/serio/i8042.c

853

pr_warn("If AUX port is really absent please use the 'i8042.noaux' option\n");

drivers/input/serio/i8042.c

865

pr_warn("Attempting to reset device connected to KBD port\n");

drivers/input/serio/serio.c

254

pr_warn("Can't get module reference, dropping event %d\n",

drivers/input/serio/serio.c

779

pr_warn("driver_attach() failed for %s with error %d\n",

drivers/interconnect/qcom/icc-common.c

32

pr_warn("%pOF: Too many arguments, path tag is not parsed\n", spec->np);

drivers/iommu/amd/init.c

1211

pr_warn("Translation is already enabled - trying to reuse translation structures\n");

drivers/iommu/amd/init.c

1654

pr_warn(FW_BUG "Invalid UID length.\n");

drivers/iommu/amd/init.c

1967

pr_warn("Translation was enabled for IOMMU:%d but we are not in kdump mode\n",

drivers/iommu/amd/init.c

2147

pr_warn(FW_WARN

drivers/iommu/amd/init.c

3020

pr_warn("Force to disable Virtual APIC due to SNP\n");

drivers/iommu/amd/init.c

3252

pr_warn("Cannot enable v2 page table for DMA-API. Fallback to v1.\n");

drivers/iommu/amd/init.c

3368

pr_warn("SNP: IOMMU disabled or configured in passthrough mode, SNP cannot be supported.\n");

drivers/iommu/amd/init.c

3373

pr_warn("SNP: IOMMU is configured with V2 page table mode, SNP cannot be supported.\n");

drivers/iommu/amd/init.c

3379

pr_warn("SNP: IOMMU SNP feature not enabled, SNP cannot be supported.\n");

drivers/iommu/amd/init.c

3387

pr_warn("SNP: RMP initialization failed, SNP cannot be supported.\n");

drivers/iommu/amd/init.c

3665

pr_warn("amd_iommu=fullflush deprecated; use iommu.strict=1 instead\n");

drivers/iommu/amd/init.c

3709

pr_warn("ivrs_ioapic%s option format deprecated; use ivrs_ioapic=%d@%04x:%02x:%02x.%d instead\n",

drivers/iommu/amd/init.c

3747

pr_warn("ivrs_hpet%s option format deprecated; use ivrs_hpet=%d@%04x:%02x:%02x.%d instead\n",

drivers/iommu/amd/init.c

3795

pr_warn("ivrs_acpihid%s option format deprecated; use ivrs_acpihid=%s@%04x:%02x:%02x.%d instead\n",

drivers/iommu/amd/init.c

3987

pr_warn("IOMMU PFN %lx RMP lookup failed, ret %d\n", pfn, ret);

drivers/iommu/amd/init.c

3992

pr_warn("IOMMU PFN %lx not assigned in RMP table\n", pfn);

drivers/iommu/amd/init.c

4001

pr_warn("PSMASH failed for IOMMU PFN %lx huge RMP entry, ret: %d, level: %d\n",

drivers/iommu/amd/iommu.c

3801

pr_warn("Failed to allocate IRTE\n");

drivers/iommu/dma-iommu.c

2124

pr_warn("Failed to set up IOMMU for device %s; retaining platform DMA ops\n",

drivers/iommu/dma-iommu.c

349

pr_warn("iova flush queue initialization failed\n");

drivers/iommu/dma-iommu.c

681

pr_warn("specified DMA range outside IOMMU capability\n");

drivers/iommu/dma-iommu.c

693

pr_warn("Incompatible range for DMA domain\n");

drivers/iommu/intel/dmar.c

2265

pr_warn(FW_BUG "No DRHD structures in buffer returned by _DSM method\n");

drivers/iommu/intel/dmar.c

2352

pr_warn("Failed to locate _DSM method.\n");

drivers/iommu/intel/dmar.c

253

pr_warn("Device scope type does not match for %s\n",

drivers/iommu/intel/dmar.c

474

pr_warn(FW_BUG

drivers/iommu/intel/dmar.c

506

pr_warn(FW_BUG

drivers/iommu/intel/dmar.c

576

pr_warn("Unable to map DMAR\n");

drivers/iommu/intel/dmar.c

597

pr_warn(FW_BUG "Record passes table end\n");

drivers/iommu/intel/dmar.c

615

pr_warn("No handler for DMAR structure type %d\n",

drivers/iommu/intel/dmar.c

669

pr_warn("Invalid DMAR haw\n");

drivers/iommu/intel/dmar.c

676

pr_warn(FW_BUG "No DRHD structure found in DMAR table\n");

drivers/iommu/intel/dmar.c

767

pr_warn("No IOMMU scope found for ANDD enumeration ID %d (%s)\n",

drivers/iommu/intel/dmar.c

898

pr_warn("Can't validate DRHD address: %llx\n", drhd->address);

drivers/iommu/intel/dmar.c

95

pr_warn("Unsupported device scope\n");

drivers/iommu/intel/iommu.c

1641

pr_warn("Translation was enabled for %s but we are not in kdump mode\n",

drivers/iommu/intel/iommu.c

1919

pr_warn(FW_BUG

drivers/iommu/intel/iommu.c

250

pr_warn("intel_iommu=forcedac deprecated; use iommu.forcedac instead\n");

drivers/iommu/intel/iommu.c

253

pr_warn("intel_iommu=strict deprecated; use iommu.strict=1 instead\n");

drivers/iommu/intel/iommu.c

2544

pr_warn("Forcing Intel-IOMMU to enabled\n");

drivers/iommu/intel/iommu.c

2666

pr_warn("ACPI name space devices didn't probe correctly\n");

drivers/iommu/intel/iommu.c

4114

pr_warn("Recommended TLB entries for ISOCH unit is 16; your BIOS set %d\n",

drivers/iommu/intel/iommu.c

761

pr_warn("%s: Unexpected context-cache invalidation type 0x%llx\n",

drivers/iommu/intel/iommu.c

798

pr_warn("%s: Unexpected iotlb invalidation type 0x%llx\n",

drivers/iommu/intel/irq_remapping.c

1143

pr_warn("Failed to setup IRQ %d for posted mode", irqd->irq);

drivers/iommu/intel/irq_remapping.c

131

pr_warn("IR%d: can't allocate an IRTE\n", iommu->seq_id);

drivers/iommu/intel/irq_remapping.c

1435

pr_warn("Failed to allocate IRTE\n");

drivers/iommu/intel/irq_remapping.c

1552

pr_warn("DRHD %Lx: failed to parse managed IOAPIC/HPET\n",

drivers/iommu/intel/irq_remapping.c

313

pr_warn("Failed to set source-id of IOAPIC (%d)\n", apic);

drivers/iommu/intel/irq_remapping.c

338

pr_warn("Failed to set source-id of HPET block (%d)\n", id);

drivers/iommu/intel/irq_remapping.c

697

pr_warn("Failed to enable irq remapping. You are vulnerable to irq-injection attacks.\n");

drivers/iommu/intel/irq_remapping.c

707

pr_warn("This system BIOS has enabled interrupt remapping\n"

drivers/iommu/intel/irq_remapping.c

859

pr_warn("Exceeded Max HPET blocks\n");

drivers/iommu/intel/irq_remapping.c

904

pr_warn("Exceeded Max IO APICS\n");

drivers/iommu/intel/perfmon.c

668

pr_warn("PMU counter capability inconsistent, counter number reduced to %d\n",

drivers/iommu/intel/prq.c

295

pr_warn("IOMMU: %s: Failed to allocate page request queue\n",

drivers/iommu/iommu-debug-pagealloc.c

92

pr_warn("iommu: Detected page leak!\n");

drivers/iommu/iommu-debugfs.c

35

pr_warn("\n");

drivers/iommu/iommu-debugfs.c

36

pr_warn("*************************************************************\n");

drivers/iommu/iommu-debugfs.c

37

pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");

drivers/iommu/iommu-debugfs.c

38

pr_warn("** **\n");

drivers/iommu/iommu-debugfs.c

39

pr_warn("** IOMMU DebugFS SUPPORT HAS BEEN ENABLED IN THIS KERNEL **\n");

drivers/iommu/iommu-debugfs.c

40

pr_warn("** **\n");

drivers/iommu/iommu-debugfs.c

41

pr_warn("** This means that this kernel is built to expose internal **\n");

drivers/iommu/iommu-debugfs.c

42

pr_warn("** IOMMU data structures, which may compromise security on **\n");

drivers/iommu/iommu-debugfs.c

43

pr_warn("** your system. **\n");

drivers/iommu/iommu-debugfs.c

44

pr_warn("** **\n");

drivers/iommu/iommu-debugfs.c

45

pr_warn("** If you see this message and you are not debugging the **\n");

drivers/iommu/iommu-debugfs.c

46

pr_warn("** kernel, report this immediately to your vendor! **\n");

drivers/iommu/iommu-debugfs.c

47

pr_warn("** **\n");

drivers/iommu/iommu-debugfs.c

48

pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");

drivers/iommu/iommu-debugfs.c

49

pr_warn("*************************************************************\n");

drivers/iommu/iommu.c

1770

pr_warn("Failed to allocate default IOMMU domain of type %u for group %s - Falling back to IOMMU_DOMAIN_DMA",

drivers/iommu/s390-iommu.c

1099

pr_warn("s390_iommu=strict deprecated; use iommu.strict=1 instead\n");

drivers/iommu/tegra-smmu.c

374

pr_warn("%s group from swgroup %u not found\n", __func__,

drivers/irqchip/exynos-combiner.c

186

pr_warn("%s: irq domain init failed\n", __func__);

drivers/irqchip/irq-aclint-sswi.c

92

pr_warn("%pfwP: hart index [%d] not found\n", fwnode, i);

drivers/irqchip/irq-atmel-aic-common.c

124

pr_warn("AIC: external irq %d >= %d skip it\n",

drivers/irqchip/irq-econet-en751221.c

173

pr_warn("%s: Failed irq_set_percpu_devid for %u: %d\n", d->name, irq, ret);

drivers/irqchip/irq-ftintc010.c

107

pr_warn("Faraday IRQ: no supported trigger selected for line %d\n",

drivers/irqchip/irq-gic-v3-its.c

2304

pr_warn("GICv3: Expected reserved range [%pa:%pa], not found\n",

drivers/irqchip/irq-gic-v3-its.c

2395

pr_warn("ITS@%pa: %s too large, reduce ITS pages %u->%u\n",

drivers/irqchip/irq-gic-v3-its.c

2535

pr_warn("ITS@%pa: %s Table too large, reduce ids %llu->%u\n",

drivers/irqchip/irq-gic-v3-its.c

5110

pr_warn("ITS@%pa: Unable to map ITS registers\n", &res->start);

drivers/irqchip/irq-gic-v3-its.c

5117

pr_warn("ITS@%pa: No ITS detected, giving up\n", &res->start);

drivers/irqchip/irq-gic-v3-its.c

5124

pr_warn("ITS@%pa: Failed to quiesce, giving up\n", &res->start);

drivers/irqchip/irq-gic-v3-its.c

5383

pr_warn("GICv3: CPU%d: Booted with LPIs enabled, memory probably corrupted\n",

drivers/irqchip/irq-gic-v3-its.c

5581

pr_warn("%pOF: no msi-controller property, ITS ignored\n",

drivers/irqchip/irq-gic-v3-its.c

5587

pr_warn("%pOF: no regs?\n", np);

drivers/irqchip/irq-gic-v3-its.c

5840

pr_warn("ITS: No ITS available, not enabling LPIs\n");

drivers/irqchip/irq-gic-v3.c

185

pr_warn("Broken GIC integration, security disabled\n");

drivers/irqchip/irq-gic-v3.c

187

pr_warn("Broken GIC integration, pNMI forbidden\n");

drivers/irqchip/irq-gic-v3.c

2336

pr_warn("CPU %u's redistributor is inaccessible: this CPU can't be brought online\n", cpu);

drivers/irqchip/irq-gic-v3.c

2502

pr_warn("Unable to get hardware information used for virtualization\n");

drivers/irqchip/irq-gic-v3.c

730

pr_warn("GIC: PPI INTID%ld is secure or misconfigured\n", irq);

drivers/irqchip/irq-gic-v3.c

997

pr_warn("No redistributor present @%p\n", ptr);

drivers/irqchip/irq-gic-v5-irs.c

629

pr_warn(FW_BUG "Erroneous CPU node phandle\n");

drivers/irqchip/irq-gic-v5-irs.c

639

pr_warn("CPU %d iaffid 0x%x exceeds IRS iaffid bits\n",

drivers/irqchip/irq-gic-v5-irs.c

673

pr_warn("Detected wrong IDR priority bits value 0x%lx\n",

drivers/irqchip/irq-gic-v5-irs.c

865

pr_warn("CPU %d iaffid 0x%x exceeds IRS iaffid bits\n", cpu, gicc->iaffid);

drivers/irqchip/irq-gic-v5-irs.c

87

pr_warn("Limiting LPI ID bits from %u to %u\n",

drivers/irqchip/irq-gic-v5-its.c

591

pr_warn("Limiting device ID bits from %u to %u\n",

drivers/irqchip/irq-gic-v5-its.c

646

pr_warn("Limiting device ID bits from %u to %u\n",

drivers/irqchip/irq-gic-v5-its.c

911

pr_warn("Can't reserve event_id bitmap\n");

drivers/irqchip/irq-gic-v5.c

1120

pr_warn("cannot find GICv5 virtual CPU interface maintenance interrupt\n");

drivers/irqchip/irq-gic.c

1305

pr_warn("GIC: GICv2 detected, but range too small and irqchip.gicv2_force_probe not set\n");

drivers/irqchip/irq-gic.c

1318

pr_warn("GIC: GICv2 at %pa, but range is too small (broken DT?), assuming 8kB\n",

drivers/irqchip/irq-gic.c

1335

pr_warn("GIC: Aliased GICv2 at %pa, trying to find the canonical range over 128kB\n",

drivers/irqchip/irq-gic.c

1358

pr_warn("GIC: Adjusting CPU interface base to %pa\n",

drivers/irqchip/irq-gic.c

309

pr_warn("GIC: PPI%ld is secure or misconfigured\n", gicirq - 16);

drivers/irqchip/irq-hip04.c

136

pr_warn("GIC: PPI%d is secure or misconfigured\n", irq - 16);

drivers/irqchip/irq-imx-irqsteer.c

136

pr_warn("%s: unable to get hwirq base for irq %d\n",

drivers/irqchip/irq-loongarch-avec.c

160

pr_warn("CPU#%d vector is busy\n", cpu);

drivers/irqchip/irq-loongarch-avec.c

250

pr_warn("Unexpected IRQ occurs on CPU#%d [vector %ld]\n", smp_processor_id(), vector);

drivers/irqchip/irq-ls-scfg-msi.c

122

pr_warn("cannot bind the irq to cpu%d\n", cpu);

drivers/irqchip/irq-mips-gic.c

1009

pr_warn("No CPU cores on the cluster %d skip it\n", cl);

drivers/irqchip/irq-mips-gic.c

932

pr_warn("Using inherited base address %pa\n",

drivers/irqchip/irq-nvic.c

106

pr_warn("Failed to allocate irq chips\n");

drivers/irqchip/irq-nvic.c

85

pr_warn("unable to map nvic registers\n");

drivers/irqchip/irq-nvic.c

97

pr_warn("Failed to allocate irq domain\n");

drivers/irqchip/irq-omap-intc.c

196

pr_warn("Failed to allocate irq chips\n");

drivers/irqchip/irq-omap-intc.c

273

pr_warn("Couldn't allocate IRQ numbers\n");

drivers/irqchip/irq-pic32-evic.c

199

pr_warn("More than %d external irq, skip rest\n",

drivers/irqchip/irq-riscv-imsic-state.c

885

pr_warn("%pfwP: hart ID for parent irq%d not found\n", fwnode, i);

drivers/irqchip/irq-riscv-imsic-state.c

891

pr_warn("%pfwP: invalid cpuid for parent irq%d\n", fwnode, i);

drivers/irqchip/irq-riscv-imsic-state.c

914

pr_warn("%pfwP: MMIO not found for parent irq%d\n", fwnode, i);

drivers/irqchip/irq-riscv-intc.c

219

pr_warn("unable to find hart id for %pOF\n", node);

drivers/irqchip/irq-sifive-plic.c

519

pr_warn("%pfwP: cpu%d: parent irq not available\n",

drivers/irqchip/irq-sifive-plic.c

680

pr_warn("%pfwP: hwirq for context%d not found\n", fwnode, i);

drivers/irqchip/irq-sifive-plic.c

689

pr_warn("%pfwP: invalid context id for context%d\n", fwnode, i);

drivers/irqchip/irq-sifive-plic.c

711

pr_warn("%pfwP: Invalid cpuid for context %d\n", fwnode, i);

drivers/irqchip/irq-sifive-plic.c

722

pr_warn("%pfwP: handler already present for context %d.\n", fwnode, i);

drivers/irqchip/irq-xilinx-intc.c

188

pr_warn("irq-xilinx: unable to read xlnx,kind-of-intr\n");

drivers/irqchip/irq-xilinx-intc.c

193

pr_warn("irq-xilinx: mismatch in kind-of-intr param\n");

drivers/irqchip/qcom-pdc.c

367

pr_warn("%pOF: invalid reg size, please fix DT\n", node);

drivers/irqchip/spear-shirq.c

245

pr_warn("%s: irq domain init failed\n", __func__);

drivers/isdn/hardware/mISDN/avmfritz.c

406

pr_warn("%s.B%d: No bufferspace for %d bytes\n",

drivers/isdn/hardware/mISDN/avmfritz.c

542

pr_warn("%s: ch%d stat %x RDO\n",

drivers/isdn/hardware/mISDN/avmfritz.c

565

pr_warn("%s: got invalid frame\n",

drivers/isdn/hardware/mISDN/avmfritz.c

578

pr_warn("%s: ch%d stat %x XDU %s\n", fc->name, bch->nr,

drivers/isdn/hardware/mISDN/hfcmulti.c

2222

pr_warn("card%d.B%d: No bufferspace for %d bytes\n",

drivers/isdn/hardware/mISDN/hfcmulti.c

2234

pr_warn("card%d: No mem for dch rx_skb\n",

drivers/isdn/hardware/mISDN/hfcpci.c

572

pr_warn("B%d: No bufferspace for %d bytes\n", bch->nr, fcnt_rx);

drivers/isdn/hardware/mISDN/hfcsusb.c

2102

pr_warn("%s: No memory for control urb\n",

drivers/isdn/hardware/mISDN/hfcsusb.c

847

pr_warn("%s.B%d: No bufferspace for %d bytes\n",

drivers/isdn/hardware/mISDN/mISDNipac.c

940

pr_warn("%s.B%d: No bufferspace for %d bytes\n",

drivers/isdn/hardware/mISDN/mISDNisar.c

225

pr_warn("ISAR poll_mbox dkey failed\n");

drivers/isdn/hardware/mISDN/mISDNisar.c

435

pr_warn("%s.B%d: No bufferspace for %d bytes\n",

drivers/isdn/hardware/mISDN/mISDNisar.c

446

pr_warn("%s.B%d: No bufferspace for %d bytes\n",

drivers/isdn/hardware/mISDN/netjet.c

384

pr_warn("%s.B%d: No memory for %d bytes\n",

drivers/isdn/hardware/mISDN/netjet.c

424

pr_warn("%s.B%d: No memory for %d bytes\n",

drivers/isdn/hardware/mISDN/w6692.c

470

pr_warn("%s.B%d: No bufferspace for %d bytes\n",

drivers/isdn/hardware/mISDN/w6692.c

733

pr_warn("%s: B%d XDOW proto=%x\n", card->name,

drivers/isdn/hardware/mISDN/w6692.c

751

pr_warn("%s: B%d XDUN proto=%x\n", card->name,

drivers/isdn/mISDN/hwchannel.c

477

pr_warn("B%d no space for %d (only %d) bytes\n",

drivers/isdn/mISDN/hwchannel.c

511

pr_warn("B%d receive no memory for %d bytes\n", bch->nr, len);

drivers/leds/led-triggers.c

497

pr_warn("LED trigger %s failed to register (%d)\n",

drivers/leds/led-triggers.c

501

pr_warn("LED trigger %s failed to register (no memory)\n",

drivers/macintosh/adb.c

341

pr_warn("Warning: no ADB interface detected\n");

drivers/macintosh/via-pmu.c

807

pr_warn("pmu.c: unrecognized battery info, "

drivers/macintosh/windfarm_cpufreq_clamp.c

72

pr_warn("%s: cpufreq policy not found cpu0\n", __func__);

drivers/macintosh/windfarm_cpufreq_clamp.c

92

pr_warn("%s: No cpu device for cpu0\n", __func__);

drivers/macintosh/windfarm_fcu_controls.c

471

pr_warn("wf_fcu: Can't parse fan ID in device-tree for %pOF\n", np);

drivers/macintosh/windfarm_lm87_sensor.c

126

pr_warn("wf_lm87: Unsupported sensor %pOF\n",

drivers/macintosh/windfarm_pm72.c

288

pr_warn("wf_pm72: Fan %s reports error %d\n",

drivers/macintosh/windfarm_pm72.c

299

pr_warn("wf_pm72: Fan %s reports error %d\n",

drivers/macintosh/windfarm_pm72.c

370

pr_warn("wf_pm72: Fan %s reports error %d\n",

drivers/macintosh/windfarm_pm72.c

376

pr_warn("wf_pm72: Fan %s reports error %d\n",

drivers/macintosh/windfarm_pm72.c

384

pr_warn("wf_pm72: Pump %s reports error %d\n",

drivers/macintosh/windfarm_pm72.c

564

pr_warn("wf_pm72: drive bay temp sensor error %d\n", err);

drivers/macintosh/windfarm_rm31.c

284

pr_warn("wf_rm31: Fan %s reports error %d\n",

drivers/macintosh/windfarm_rm31.c

468

pr_warn("wf_rm31: slots temp sensor error %d\n", err);

drivers/mailbox/pcc.c

737

pr_warn("Error parsing PCC subspaces from PCCT\n");

drivers/mailbox/pcc.c

739

pr_warn("Invalid PCCT: %d PCC subspaces\n", count);

drivers/md/bcache/btree.c

1852

pr_warn("gc failed!\n");

drivers/md/bcache/btree.c

831

pr_warn("bcache: %s: could not allocate shrinker\n", __func__);

drivers/md/bcache/super.c

1106

pr_warn("failed to create bcache_status_update kthread, continue to run without monitoring backing device status\n");

drivers/md/bcache/super.c

1136

pr_warn("give up waiting for dc->writeback_write_update to quit\n");

drivers/md/bcache/super.c

1781

pr_warn("stop_when_cache_set_failed of %s is \"always\", stop it for failed cache set %pU.\n",

drivers/md/bcache/super.c

1789

pr_warn("stop_when_cache_set_failed of %s is \"auto\" and cache is dirty, stop it to avoid potential data corruption.\n",

drivers/md/bcache/super.c

1811

pr_warn("stop_when_cache_set_failed of %s is \"auto\" and cache is clean, keep it alive.\n",

drivers/md/bcache/super.c

2868

pr_warn("set bch_cutoff_writeback_sync (%u) to max value %u\n",

drivers/md/bcache/super.c

2876

pr_warn("set bch_cutoff_writeback (%u) to max value %u\n",

drivers/md/bcache/super.c

2882

pr_warn("set bch_cutoff_writeback (%u) to %u\n",

drivers/md/bcache/super.c

711

pr_warn("bad csum reading priorities\n");

drivers/md/bcache/super.c

716

pr_warn("bad magic reading priorities\n");

drivers/md/bcache/sysfs.c

901

pr_warn("CACHE_SET_IO_DISABLE already set\n");

drivers/md/bcache/sysfs.c

905

pr_warn("CACHE_SET_IO_DISABLE already cleared\n");

drivers/md/bcache/writeback.c

890

pr_warn("sectors dirty init failed, ret=%d!\n", ret);

drivers/md/dm-vdo/logger.c

74

pr_warn("%pV", &vaf);

drivers/md/md-autodetect.c

158

pr_warn("md: Unknown device name: %s\n", devname);

drivers/md/md-autodetect.c

185

pr_warn("md: Ignoring %s, already autodetected. (Use raid=noautodetect)\n",

drivers/md/md-autodetect.c

222

pr_warn("md: starting %s failed\n", name);

drivers/md/md-bitmap.c

1101

pr_warn("%s: kicking failed bitmap file %pD4 from array!\n",

drivers/md/md-bitmap.c

1105

pr_warn("%s: disabling internal bitmap due to errors\n",

drivers/md/md-bitmap.c

1349

pr_warn("%s: bitmap file too short %lu < %lu\n",

drivers/md/md-bitmap.c

1380

pr_warn("%s: bitmap file is out of date, doing full recovery\n",

drivers/md/md-bitmap.c

1438

pr_warn("%s: bitmap initialisation failed: %d\n",

drivers/md/md-bitmap.c

2495

pr_warn("Could not pre-allocate in-memory bitmap for cluster raid\n");

drivers/md/md-bitmap.c

777

pr_warn("bitmap chunksize not a power of 2\n");

drivers/md/md-bitmap.c

895

pr_warn("%s: invalid bitmap file superblock: %s\n",

drivers/md/md-bitmap.c

919

pr_warn("%s: bitmap superblock UUID mismatch\n",

drivers/md/md-bitmap.c

925

pr_warn("%s: bitmap file is out of date (%llu < %llu) -- forcing full recovery\n",

drivers/md/md-bitmap.c

946

pr_warn("%s: Could not setup cluster service (%d)\n",

drivers/md/md-cluster.c

1122

pr_warn("md-cluster: No good device id found to send\n");

drivers/md/md-cluster.c

1520

pr_warn("md-cluster(%s): Spurious cluster confirmation\n", mdname(mddev));

drivers/md/md-cluster.c

1610

pr_warn("md-cluster: Could not gather bitmaps from slot %d", sn);

drivers/md/md-cluster.c

1655

pr_warn("md-cluster: support raid1 and raid10 (limited support)\n");

drivers/md/md-cluster.c

377

pr_warn("md-cluster: Could not create recovery thread\n");

drivers/md/md-cluster.c

554

pr_warn("md-cluster: Received metadata update but MD thread is not ready\n");

drivers/md/md-cluster.c

579

pr_warn("%s: %d Could not find disk(%d) to REMOVE\n",

drivers/md/md-cluster.c

593

pr_warn("%s: %d Could not find disk(%d) which is faulty",

drivers/md/md-cluster.c

642

pr_warn("%s:%d Received unknown message from %d\n",

drivers/md/md-cluster.c

867

pr_warn("md-cluster: Could not gather bitmaps from slot %d", i);

drivers/md/md-linear.c

121

pr_warn("md/linear:%s: disk numbering problem. Aborting!\n",

drivers/md/md-linear.c

137

pr_warn("md/linear:%s: not enough drives present. Aborting!\n",

drivers/md/md-llbitmap.c

886

pr_warn("md/llbitmap :%s: bitmap file is out of date (%lu < %llu) -- forcing full recovery",

drivers/md/md-llbitmap.c

913

pr_warn("md/llbitmap: %s daemon_work not finished in %lu seconds\n",

drivers/md/md-llbitmap.c

954

pr_warn("md/llbitmap: %s: %s waiting for page %d timeout\n",

drivers/md/md.c

10065

pr_warn("%s: could not start resync thread...\n",

drivers/md/md.c

1039

pr_warn("md: personality for level %d is not loaded!\n",

drivers/md/md.c

1042

pr_warn("md: personality for level %s is not loaded!\n",

drivers/md/md.c

10624

pr_warn("md: updating array disks failed. %d\n", ret);

drivers/md/md.c

10673

pr_warn("%s: %d Could not reload rdev(%d) err: %d. Restoring old values\n",

drivers/md/md.c

10716

pr_warn("%s: %d Could not find rdev with nr %d\n", __func__, __LINE__, nr);

drivers/md/md.c

1344

pr_warn("%s: bitmaps are not supported for %s\n",

drivers/md/md.c

1376

pr_warn("md: invalid raid superblock magic on %pg\n",

drivers/md/md.c

1384

pr_warn("Bad version number %d.%d on %pg\n",

drivers/md/md.c

1393

pr_warn("md: invalid superblock checksum on %pg\n", rdev->bdev);

drivers/md/md.c

1419

pr_warn("md: %pg has different UUID to %pg\n",

drivers/md/md.c

1424

pr_warn("md: %pg has same UUID but different superblock to %pg\n",

drivers/md/md.c

1845

pr_warn("md: invalid superblock checksum on %pg\n",

drivers/md/md.c

1850

pr_warn("md: data_size too small on %pg\n",

drivers/md/md.c

1857

pr_warn("Some padding is non-zero on %pg, might be a new feature\n",

drivers/md/md.c

1861

pr_warn("check_new_feature is disabled, data corruption possible\n");

drivers/md/md.c

1956

pr_warn("md: %pg has strangely different superblock to %pg\n",

drivers/md/md.c

2127

pr_warn("md: %s: rdev[%pg]: desc_nr(%d) >= freshest(%pg)->sb->max_dev(%u)\n",

drivers/md/md.c

2148

pr_warn("md: journal device provided without journal feature, ignoring the device\n");

drivers/md/md.c

2594

pr_warn("md: %s: array is limited to %d devices\n",

drivers/md/md.c

2624

pr_warn("md: failed to register dev-%s for %s\n",

drivers/md/md.c

3835

pr_warn("md: could not open device unknown-block(%u,%u).\n",

drivers/md/md.c

3846

pr_warn("md: %pg has zero or unknown size, marking faulty!\n",

drivers/md/md.c

3856

pr_warn("md: %pg does not have a valid v%d.%d superblock, not importing!\n",

drivers/md/md.c

3862

pr_warn("md: could not read %pg's sb, not importing!\n",

drivers/md/md.c

3897

pr_warn("md: fatal superblock inconsistency in %pg -- removing from array\n",

drivers/md/md.c

3904

pr_warn("md: cannot find a valid disk\n");

drivers/md/md.c

3914

pr_warn("md: %s: %pg: only %d devices permitted\n",

drivers/md/md.c

3923

pr_warn("md: kicking non-fresh %pg from array!\n",

drivers/md/md.c

3988

pr_warn("md: Safemode is disabled for clustered mode\n");

drivers/md/md.c

4075

pr_warn("md: %s: %s does not support online personality change\n",

drivers/md/md.c

4104

pr_warn("md: %s: %s does not support personality takeover\n",

drivers/md/md.c

4125

pr_warn("md: %s: %s would not accept array\n",

drivers/md/md.c

4168

pr_warn("md: cannot register extra attributes for %s\n",

drivers/md/md.c

4202

pr_warn("md: cannot register rd%d for %s after level change\n",

drivers/md/md.c

6206

pr_warn("%s: echo current LBS to md/logical_block_size to prevent data loss issues from LBS changes.\n"

drivers/md/md.c

6392

pr_warn("md: async del_gendisk mode will be removed in future, please upgrade to mdadm-4.5+\n");

drivers/md/md.c

6533

pr_warn("md: %s: data overlaps metadata\n",

drivers/md/md.c

6540

pr_warn("md: %s: metadata overlaps data\n",

drivers/md/md.c

6577

pr_warn("%s: WARNING: %pg appears to be on the same physical disk as %pg.\n",

drivers/md/md.c

6586

pr_warn("True protection against single-disk failure might be compromised.\n");

drivers/md/md.c

6603

pr_warn("md: pers->run() failed ...\n");

drivers/md/md.c

6608

pr_warn("md: invalid array_size %llu > default size %llu\n",

drivers/md/md.c

6617

pr_warn("%s: failed to create bitmap (%d)\n",

drivers/md/md.c

6645

pr_warn("md: cannot register extra attributes for %s\n",

drivers/md/md.c

694

pr_warn("md: can't find bitmap id %d\n", mddev->bitmap_id);

drivers/md/md.c

6951

pr_warn("md: %s still in use.\n",mdname(mddev));

drivers/md/md.c

699

pr_warn("md: invalid bitmap id %d\n", mddev->bitmap_id);

drivers/md/md.c

6995

pr_warn("md: %s still in use.\n",mdname(mddev));

drivers/md/md.c

7069

pr_warn("md: do_md_run() returned %d\n", err);

drivers/md/md.c

708

pr_warn("md: cannot register extra bitmap attributes for %s\n",

drivers/md/md.c

7121

pr_warn("md: unit number in %pg is bad: %d\n",

drivers/md/md.c

7131

pr_warn("md: %s locked, cannot run\n", mdname(mddev));

drivers/md/md.c

7134

pr_warn("md: %s already running, cannot run %pg\n",

drivers/md/md.c

7314

pr_warn("%s: Cannot add to clustered mddev.\n",

drivers/md/md.c

7327

pr_warn("md: md_import_device returned %ld\n",

drivers/md/md.c

7338

pr_warn("md: %pg has different UUID to %pg\n",

drivers/md/md.c

7359

pr_warn("%s: personality does not support diskops!\n",

drivers/md/md.c

7369

pr_warn("md: md_import_device returned %ld\n",

drivers/md/md.c

7468

pr_warn("%s: ADD_NEW_DISK not supported\n", mdname(mddev));

drivers/md/md.c

7476

pr_warn("md: error, md_import_device() returned %ld\n",

drivers/md/md.c

7559

pr_warn("%s: HOT_ADD may only be used with version-0 superblocks.\n",

drivers/md/md.c

7564

pr_warn("%s: personality does not support diskops!\n",

drivers/md/md.c

7571

pr_warn("md: error, md_import_device() returned %ld\n",

drivers/md/md.c

7584

pr_warn("md: can not hot-add faulty %pg disk to %s!\n",

drivers/md/md.c

7643

pr_warn("%s: bitmap files not supported by this kernel\n",

drivers/md/md.c

7647

pr_warn("%s: using deprecated bitmap file support\n",

drivers/md/md.c

7653

pr_warn("%s: error: failed to get bitmap file\n",

drivers/md/md.c

7660

pr_warn("%s: error: bitmap file must be a regular file\n",

drivers/md/md.c

7664

pr_warn("%s: error: bitmap file must open for write\n",

drivers/md/md.c

7668

pr_warn("%s: error: bitmap file is already in use\n",

drivers/md/md.c

7730

pr_warn("md: superblock version %d not known\n",

drivers/md/md.c

8020

pr_warn("md: can't change bitmap to none since the array is in use by more than one node\n");

drivers/md/md.c

8131

pr_warn("md: couldn't update array info. %d\n", err);

drivers/md/md.c

8136

pr_warn("md: array %s already has disks!\n", mdname(mddev));

drivers/md/md.c

8141

pr_warn("md: array %s already initialised!\n", mdname(mddev));

drivers/md/md.c

8147

pr_warn("md: couldn't set array info. %d\n", err);

drivers/md/md.c

9009

pr_warn("can't find md-cluster module or get its reference.\n");

drivers/md/raid0.c

138

pr_warn("md/raid0:%s: chunk_size of %d not multiple of block size %d\n",

drivers/md/raid0.c

182

pr_warn("md/raid0:%s: remove inactive devices before converting to RAID0\n",

drivers/md/raid0.c

187

pr_warn("md/raid0:%s: bad disk number %d - aborting!\n",

drivers/md/raid0.c

192

pr_warn("md/raid0:%s: multiple devices for %d - aborting!\n",

drivers/md/raid0.c

203

pr_warn("md/raid0:%s: too few disks (%d of %d) - aborting!\n",

drivers/md/raid0.c

407

pr_warn("md/raid0:%s: chunk size must be set.\n", mdname(mddev));

drivers/md/raid0.c

649

pr_warn("md/raid0:%s: raid5 must be degraded! Degraded disks: %d\n",

drivers/md/raid0.c

658

pr_warn("md/raid0:%s: raid5 must have missing parity disk!\n",

drivers/md/raid0.c

691

pr_warn("md/raid0:%s:: Raid0 cannot takeover layout: 0x%x\n",

drivers/md/raid0.c

697

pr_warn("md/raid0:%s: Raid0 cannot takeover Raid10 with odd disk number.\n",

drivers/md/raid0.c

702

pr_warn("md/raid0:%s: All mirrors must be already degraded!\n",

drivers/md/raid0.c

775

pr_warn("md/raid0: %s: cannot takeover array with bitmap\n",

drivers/md/raid0.c

786

pr_warn("md/raid0:%s: Raid can only takeover Raid5 with layout: %d\n",

drivers/md/raid0.c

796

pr_warn("Takeover from raid%i to raid0 not supported\n",

drivers/md/raid1.c

3208

pr_warn("md/raid1:%s: raid level not set to mirroring (%d)\n",

drivers/md/raid1.c

3213

pr_warn("md/raid1:%s: reshape_position set but not supported\n",

drivers/md/raid1.c

3402

pr_warn("md/raid1:%s: cannot register rd%d\n",

drivers/md/raid10.c

3460

pr_warn("md/raid10:%s: cannot recovery sector %llu + %d.\n",

drivers/md/raid10.c

3843

pr_warn("md/raid10:%s: chunk size must be at least PAGE_SIZE(%ld) and be a power of 2.\n",

drivers/md/raid10.c

3849

pr_warn("md/raid10:%s: unsupported raid10 layout: 0x%8x\n",

drivers/md/raid10.c

4101

pr_warn("md/raid10: offset difference not enough to continue reshape\n");

drivers/md/raid10.c

4191

pr_warn("md/raid10:%s: Error: degraded raid0!\n",

drivers/md/raid10.c

4231

pr_warn("md/raid10:%s: cannot takeover raid 0 with more than one zone.\n",

drivers/md/raid10.c

4418

pr_warn("md/raid10:%s: array size must be reduce before number of disks\n",

drivers/md/raid5-ppl.c

1210

pr_warn("md/raid:%s: PPL header signature does not match on all member drives\n",

drivers/md/raid5-ppl.c

1267

pr_warn("md/raid:%s: PPL space too small on %pg\n",

drivers/md/raid5-ppl.c

1278

pr_warn("md/raid:%s: PPL space overlaps with data on %pg\n",

drivers/md/raid5-ppl.c

1286

pr_warn("md/raid:%s: PPL space overlaps with superblock on %pg\n",

drivers/md/raid5-ppl.c

1330

pr_warn("md/raid:%s PPL is not compatible with raid level %d\n",

drivers/md/raid5-ppl.c

1336

pr_warn("md/raid:%s PPL is not compatible with bitmap\n",

drivers/md/raid5-ppl.c

1342

pr_warn("md/raid:%s PPL is not compatible with journal\n",

drivers/md/raid5-ppl.c

1350

pr_warn("md/raid:%s PPL doesn't support over %d disks in the array\n",

drivers/md/raid5.c

2801

pr_warn("md/raid:%s: %d read_errors > %d stripes\n",

drivers/md/raid5.c

2805

pr_warn("md/raid:%s: Too many read errors, failing device %pg.\n",

drivers/md/raid5.c

3261

pr_warn("md/raid:%s: compute_blocknr: map not correct\n",

drivers/md/raid5.c

4531

pr_warn("%s: unknown check_state: %d sector: %llu\n",

drivers/md/raid5.c

7033

pr_warn("md/raid:%s: couldn't allocate buffers\n",

drivers/md/raid5.c

7400

pr_warn("%s: failed memory allocation for cpu%u\n",

drivers/md/raid5.c

7474

pr_warn("md/raid:%s: raid level not set to 4/5/6 (%d)\n",

drivers/md/raid5.c

7482

pr_warn("md/raid:%s: layout %d not supported\n",

drivers/md/raid5.c

7487

pr_warn("md/raid:%s: not enough configured devices (%d, minimum 4)\n",

drivers/md/raid5.c

7495

pr_warn("md/raid:%s: invalid chunk size %d\n",

drivers/md/raid5.c

7670

pr_warn("md/raid:%s: couldn't allocate %dkB for buffers\n",

drivers/md/raid5.c

7684

pr_warn("md/raid:%s: couldn't allocate shrinker.\n",

drivers/md/raid5.c

7701

pr_warn("md/raid:%s: couldn't allocate thread.\n",

drivers/md/raid5.c

7889

pr_warn("md/raid:%s: don't support reshape with journal - aborting.\n",

drivers/md/raid5.c

7895

pr_warn("md/raid:%s: unsupported reshape required - aborting.\n",

drivers/md/raid5.c

7911

pr_warn("md/raid:%s: reshape_position not on a stripe boundary\n",

drivers/md/raid5.c

7933

pr_warn("md/raid:%s: in-place reshape must be started in read-only mode - aborting\n",

drivers/md/raid5.c

7943

pr_warn("md/raid:%s: reshape_position too early for auto-recovery - aborting.\n",

drivers/md/raid5.c

7958

pr_warn("md/raid:%s: using journal device and PPL not allowed - disabling PPL\n",

drivers/md/raid5.c

7974

pr_warn("md/raid:%s: journal disk is missing, force array readonly\n",

drivers/md/raid5.c

7995

pr_warn("md: cannot handle concurrent replacement and reshape.\n");

drivers/md/raid5.c

8080

pr_warn("raid5: failed to create sysfs attributes for %s\n",

drivers/md/raid5.c

8104

pr_warn("md/raid:%s: failed to run raid set.\n", mdname(mddev));

drivers/md/raid5.c

8413

pr_warn("md/raid:%s: reshape: not enough stripes. Needed %lu\n",

drivers/md/raid5.c

8508

pr_warn("md/raid:%s: array size must be reduced before number of disks\n",

drivers/md/raid5.c

8695

pr_warn("md/raid:%s: cannot takeover raid0 with more than one zone.\n",

drivers/media/cec/core/cec-adap.c

514

pr_warn("cec-%s: message %*ph timed out\n", adap->name,

drivers/media/cec/core/cec-adap.c

521

pr_warn("cec-%s: transmit timed out\n", adap->name);

drivers/media/cec/core/cec-core.c

410

pr_warn("cec: unable to allocate major\n");

drivers/media/cec/core/cec-core.c

417

pr_warn("cec: Failed to create debugfs cec dir\n");

drivers/media/cec/core/cec-core.c

426

pr_warn("cec: bus_register failed\n");

drivers/media/common/saa7146/saa7146_core.c

311

pr_warn("%s: unexpected i2c irq: isr %08x psr %08x ssr %08x\n",

drivers/media/common/saa7146/saa7146_i2c.c

205

pr_warn("%s %s [irq]: timed out waiting for end of xfer\n",

drivers/media/common/saa7146/saa7146_i2c.c

223

pr_warn("%s %s: timed out waiting for MC2\n",

drivers/media/common/saa7146/saa7146_i2c.c

240

pr_warn("%s %s [poll]: timed out waiting for end of xfer\n",

drivers/media/common/tveeprom.c

489

pr_warn("Encountered bad packet header [%02x]. Corrupt or not a Hauppauge eeprom.\n",

drivers/media/common/tveeprom.c

642

pr_warn("Ran out of data!\n");

drivers/media/common/tveeprom.c

751

pr_warn("i2c eeprom read error (err=%d)\n", err);

drivers/media/common/videobuf2/videobuf2-core.c

2218

pr_warn("driver bug: stop_streaming operation is leaving buffer %u in active state\n",

drivers/media/common/videobuf2/videobuf2-dvb.c

110

pr_warn("%s: dvb_register_frontend failed (errno = %d)\n",

drivers/media/common/videobuf2/videobuf2-dvb.c

126

pr_warn("%s: dvb_dmx_init failed (errno = %d)\n",

drivers/media/common/videobuf2/videobuf2-dvb.c

137

pr_warn("%s: dvb_dmxdev_init failed (errno = %d)\n",

drivers/media/common/videobuf2/videobuf2-dvb.c

145

pr_warn("%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",

drivers/media/common/videobuf2/videobuf2-dvb.c

153

pr_warn("%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",

drivers/media/common/videobuf2/videobuf2-dvb.c

160

pr_warn("%s: connect_frontend failed (errno = %d)\n",

drivers/media/common/videobuf2/videobuf2-dvb.c

168

pr_warn("%s: dvb_net_init failed (errno = %d)\n",

drivers/media/common/videobuf2/videobuf2-dvb.c

207

pr_warn("Unable to register the adapter which has no frontends\n");

drivers/media/common/videobuf2/videobuf2-dvb.c

215

pr_warn("vb2_dvb_register_adapter failed (errno = %d)\n", res);

drivers/media/common/videobuf2/videobuf2-dvb.c

225

pr_warn("%s: vb2_dvb_register_frontend failed (errno = %d)\n",

drivers/media/common/videobuf2/videobuf2-dvb.c

90

pr_warn("%s: dvb_register_adapter failed (errno = %d)\n",

drivers/media/common/videobuf2/videobuf2-v4l2.c

169

pr_warn("use of bytesused == 0 is deprecated and will be removed in the future,\n");

drivers/media/common/videobuf2/videobuf2-v4l2.c

171

pr_warn("use VIDIOC_DECODER_CMD(V4L2_DEC_CMD_STOP) instead.\n");

drivers/media/common/videobuf2/videobuf2-v4l2.c

173

pr_warn("use the actual size instead.\n");

drivers/media/dvb-core/dvb_demux.c

1271

pr_warn("Couldn't allocate memory for TS/TEI check. Disabling it\n");

drivers/media/dvb-core/dvb_net.c

340

pr_warn("%lu: Invalid TS cell: SYNC %#x, TEI %u, SC %#x.\n",

drivers/media/dvb-core/dvb_net.c

402

pr_warn("%lu: TS discontinuity: got %#x, expected %#x.\n",

drivers/media/dvb-core/dvb_net.c

432

pr_warn("%lu: Invalid pointer field: %u.\n",

drivers/media/dvb-core/dvb_net.c

471

pr_warn("%lu: Expected %d more SNDU bytes, but got PUSI (pf %d, h->ts_remain %d). Flushing incomplete payload.\n",

drivers/media/dvb-core/dvb_net.c

500

pr_warn("Invalid payload packing: only %d bytes left in TS. Resyncing.\n",

drivers/media/dvb-core/dvb_net.c

520

pr_warn("%lu: Invalid ULE SNDU length %u. Resyncing.\n",

drivers/media/dvb-core/dvb_net.c

655

pr_warn("%lu: CRC32 check FAILED: %08x / %08x, SNDU len %d type %#x, ts_remain %d, next 2: %x.\n",

drivers/media/dvb-core/dvb_net.c

885

pr_warn("buffer2 not NULL: %p.\n", buffer2);

drivers/media/dvb-core/dvb_net.c

887

pr_warn("length > 32k: %zu.\n", buffer1_len);

drivers/media/dvb-core/dvb_net.c

905

pr_warn("%s: IP/MPE packet length = %d too small.\n",

drivers/media/dvb-frontends/cx24120.h

43

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/cxd2841er.h

50

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/cxd2841er.h

57

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/cxd2880/cxd2880.h

24

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/dib0070.c

120

pr_warn("DiB0070 I2C write failed\n");

drivers/media/dvb-frontends/dib0070.c

91

pr_warn("DiB0070 I2C read failed\n");

drivers/media/dvb-frontends/dib0090.c

222

pr_warn("DiB0090 I2C read failed\n");

drivers/media/dvb-frontends/dib0090.c

252

pr_warn("DiB0090 I2C write failed\n");

drivers/media/dvb-frontends/dib0090.c

278

pr_warn("DiB0090 I2C read failed\n");

drivers/media/dvb-frontends/dib0090.c

306

pr_warn("DiB0090 I2C write failed\n");

drivers/media/dvb-frontends/dib7000p.c

808

pr_warn("DIB7000P: dib7000p_get_internal_freq returned 0\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

1347

pr_warn("drx3933: I2C write/read failed\n");

drivers/media/dvb-frontends/drx39xyj/drxj.c

1374

pr_warn("drx3933: I2C write/read failed\n");

drivers/media/dvb-frontends/drxk_hard.c

5380

pr_warn("Unknown QAM demodulator parameter count %d\n",

drivers/media/dvb-frontends/drxk_hard.c

5387

pr_warn("Warning %d on %s\n", status, __func__);

drivers/media/dvb-frontends/dvb_dummy_fe.h

21

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/dvb_dummy_fe.h

26

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/dvb_dummy_fe.h

31

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/ec100.h

26

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/helene.h

76

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/helene.h

83

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/lgdt3306a.c

1170

pr_warn("UNKNOWN\n");

drivers/media/dvb-frontends/lgdt3306a.c

1253

pr_warn("UNKNOWN whatLock=%d\n", whatLock);

drivers/media/dvb-frontends/lgdt3306a.c

1823

pr_warn("expected 0x74, got 0x%x\n", (val & 0x74));

drivers/media/dvb-frontends/lgdt3306a.c

1833

pr_warn("expected 0xc6, got 0x%x\n", (val & 0xf6));

drivers/media/dvb-frontends/lgdt3306a.c

1843

pr_warn("expected 0x03, got 0x%x\n", (val & 0x73));

drivers/media/dvb-frontends/lgdt3306a.c

1858

pr_warn("unable to detect LGDT3306A hardware\n");

drivers/media/dvb-frontends/lgdt3306a.c

736

pr_warn("IF=%d KHz is not supported, 3250 assumed\n",

drivers/media/dvb-frontends/m88ds3103.h

152

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/mxl5xx.h

48

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/nxt200x.c

101

pr_warn("%s: i2c write error (addr 0x%02x, err == %i)\n",

drivers/media/dvb-frontends/nxt200x.c

118

pr_warn("%s: i2c read error (addr 0x%02x, err == %i)\n",

drivers/media/dvb-frontends/nxt200x.c

194

pr_warn("Error writing multireg register 0x%02X\n", reg);

drivers/media/dvb-frontends/nxt200x.c

273

pr_warn("Timeout waiting for nxt200x to stop. This is ok after firmware upload.\n");

drivers/media/dvb-frontends/nxt200x.c

312

pr_warn("Timeout waiting for nxt2004 to init.\n");

drivers/media/dvb-frontends/nxt200x.c

330

pr_warn("error writing to tuner\n");

drivers/media/dvb-frontends/nxt200x.c

339

pr_warn("timeout waiting for tuner lock\n");

drivers/media/dvb-frontends/nxt200x.c

368

pr_warn("timeout error writing to tuner\n");

drivers/media/dvb-frontends/nxt200x.c

64

pr_warn("%s: i2c write error (addr 0x%02x, err == %i)\n",

drivers/media/dvb-frontends/nxt200x.c

77

pr_warn("%s: i2c read error (addr 0x%02x, err == %i)\n",

drivers/media/dvb-frontends/nxt200x.c

92

pr_warn("%s: i2c wr reg=%04x: len=%d is too big!\n",

drivers/media/dvb-frontends/or51211.c

105

pr_warn("error eprom addr\n");

drivers/media/dvb-frontends/or51211.c

109

pr_warn("error eprom\n");

drivers/media/dvb-frontends/or51211.c

123

pr_warn("error 1\n");

drivers/media/dvb-frontends/or51211.c

130

pr_warn("error 2\n");

drivers/media/dvb-frontends/or51211.c

136

pr_warn("error 3\n");

drivers/media/dvb-frontends/or51211.c

143

pr_warn("error 4\n");

drivers/media/dvb-frontends/or51211.c

160

pr_warn("error 1\n");

drivers/media/dvb-frontends/or51211.c

167

pr_warn("error 2\n");

drivers/media/dvb-frontends/or51211.c

183

pr_warn("error 3\n");

drivers/media/dvb-frontends/or51211.c

193

pr_warn("error 5\n");

drivers/media/dvb-frontends/or51211.c

197

pr_warn("error 6\n");

drivers/media/dvb-frontends/or51211.c

235

pr_warn("write error\n");

drivers/media/dvb-frontends/or51211.c

240

pr_warn("read error\n");

drivers/media/dvb-frontends/or51211.c

293

pr_warn("error writing snr reg\n");

drivers/media/dvb-frontends/or51211.c

297

pr_warn("read_status read error\n");

drivers/media/dvb-frontends/or51211.c

366

pr_warn("No firmware uploaded (timeout or file not found?)\n");

drivers/media/dvb-frontends/or51211.c

373

pr_warn("Writing firmware to device failed!\n");

drivers/media/dvb-frontends/or51211.c

389

pr_warn("Load DVR Error 5\n");

drivers/media/dvb-frontends/or51211.c

402

pr_warn("Load DVR Error A\n");

drivers/media/dvb-frontends/or51211.c

408

pr_warn("Load DVR Error B\n");

drivers/media/dvb-frontends/or51211.c

419

pr_warn("Load DVR Error C\n");

drivers/media/dvb-frontends/or51211.c

425

pr_warn("Load DVR Error D\n");

drivers/media/dvb-frontends/or51211.c

437

pr_warn("Load DVR Error 6 - %d\n", i);

drivers/media/dvb-frontends/or51211.c

444

pr_warn("Load DVR Error 7 - %d\n", i);

drivers/media/dvb-frontends/or51211.c

465

pr_warn("Load DVR Error 8\n");

drivers/media/dvb-frontends/or51211.c

471

pr_warn("Load DVR Error 9\n");

drivers/media/dvb-frontends/or51211.c

69

pr_warn("error (addr %02x, err == %i)\n", reg, err);

drivers/media/dvb-frontends/or51211.c

86

pr_warn("error (addr %02x, err == %i)\n", reg, err);

drivers/media/dvb-frontends/stv0910.h

36

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/stv6111.h

22

pr_warn("%s: Driver disabled by Kconfig\n", __func__);

drivers/media/dvb-frontends/tda8261.c

99

pr_warn("%s: Frequency beyond limits, frequency=%d\n",

drivers/media/mc/mc-devnode.c

300

pr_warn("unable to allocate major\n");

drivers/media/mc/mc-devnode.c

307

pr_warn("bus_register failed\n");

drivers/media/pci/bt8xx/bttv-cards.c

3490

pr_warn("%d: tuner type unset\n", btv->c.nr);

drivers/media/pci/bt8xx/bttv-cards.c

3495

pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);

drivers/media/pci/bt8xx/bttv-cards.c

3496

pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",

drivers/media/pci/bt8xx/bttv-cards.c

3590

pr_warn("%d: unknown audiodev value!\n", btv->c.nr);

drivers/media/pci/bt8xx/bttv-cards.c

3640

pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);

drivers/media/pci/bt8xx/bttv-cards.c

3906

pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);

drivers/media/pci/bt8xx/bttv-cards.c

4025

pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",

drivers/media/pci/bt8xx/bttv-cards.c

4304

pr_warn("This is not a PCI-8604PW\n");

drivers/media/pci/bt8xx/bttv-driver.c

2634

pr_warn("%d: irq: skipped frame [main=%lx,o_vbi=%lx,o_field=%lx,rc=%lx]\n",

drivers/media/pci/bt8xx/bttv-driver.c

3248

pr_warn("%d: Can't enable device\n", btv->c.nr);

drivers/media/pci/bt8xx/bttv-driver.c

3253

pr_warn("%d: No suitable DMA available\n", btv->c.nr);

drivers/media/pci/bt8xx/bttv-driver.c

3260

pr_warn("%d: can't request iomem (0x%llx)\n",

drivers/media/pci/bt8xx/bttv-driver.c

3271

pr_warn("%d: v4l2_device_register() failed\n", btv->c.nr);

drivers/media/pci/bt8xx/bttv-driver.c

3608

pr_warn("bus_register error: %d\n", ret);

drivers/media/pci/bt8xx/bttv-i2c.c

274

pr_warn("%d: i2c read 0x%x: error\n",

drivers/media/pci/bt8xx/dvb-bt8xx.c

435

pr_warn("or51211: Init Error - Can't Reset DVR (%i)\n", ret);

drivers/media/pci/bt8xx/dvb-bt8xx.c

552

pr_warn("digitv_alps_tded4: Init Error - Can't Reset DVR (%i)\n",

drivers/media/pci/cobalt/cobalt-v4l2.c

378

pr_warn("aborted\n");

drivers/media/pci/cx23885/altera-ci.h

41

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/pci/cx23885/altera-ci.h

47

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/pci/cx23885/altera-ci.h

52

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/pci/cx23885/altera-ci.h

58

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/pci/cx23885/altera-ci.h

67

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/pci/cx23885/altera-ci.h

73

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/pci/cx23885/altera-ci.h

79

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/pci/cx23885/cimax2.c

129

pr_warn("%s: i2c wr reg=%04x: len=%d is too big!\n",

drivers/media/pci/cx23885/cx23885-alsa.c

120

pr_warn("%s: cx23885_alsa_map_sg failed\n", __func__);

drivers/media/pci/cx23885/cx23885-alsa.c

238

pr_warn("%s/1: Audio risc op code error\n",

drivers/media/pci/cx23885/cx23885-alsa.c

546

pr_warn("%s(): Missing SRAM channel configuration for analog TV Audio\n",

drivers/media/pci/cx23885/cx23885-cards.c

1443

pr_warn("%s: warning: unknown hauppauge model #%d\n",

drivers/media/pci/cx23885/cx23885-core.c

548

pr_warn("%s: %s - dma channel status dump\n",

drivers/media/pci/cx23885/cx23885-core.c

551

pr_warn("%s: cmds: %-15s: 0x%08x\n",

drivers/media/pci/cx23885/cx23885-core.c

557

pr_warn("%s: risc%d:", dev->name, i);

drivers/media/pci/cx23885/cx23885-core.c

564

pr_warn("%s: (0x%08x) iq %x:", dev->name,

drivers/media/pci/cx23885/cx23885-core.c

569

pr_warn("%s: iq %x: 0x%08x [ arg #%d ]\n",

drivers/media/pci/cx23885/cx23885-core.c

574

pr_warn("%s: fifo: 0x%08x -> 0x%x\n",

drivers/media/pci/cx23885/cx23885-core.c

576

pr_warn("%s: ctrl: 0x%08x -> 0x%x\n",

drivers/media/pci/cx23885/cx23885-core.c

578

pr_warn("%s: ptr1_reg: 0x%08x\n",

drivers/media/pci/cx23885/cx23885-core.c

580

pr_warn("%s: ptr2_reg: 0x%08x\n",

drivers/media/pci/cx23885/cx23885-core.c

582

pr_warn("%s: cnt1_reg: 0x%08x\n",

drivers/media/pci/cx23885/cx23885-core.c

584

pr_warn("%s: cnt2_reg: 0x%08x\n",

drivers/media/pci/cx23885/cx23885-dvb.c

1458

pr_warn("Unable to enumerate dib7000p\n");

drivers/media/pci/cx23885/cx23885-i2c.c

326

pr_warn("%s: i2c bus %d register FAILED\n",

drivers/media/pci/cx23885/cx23885-video.c

1120

pr_warn("%s: video risc op code error\n",

drivers/media/pci/cx25821/cx25821-alsa.c

183

pr_warn("%s: cx25821_alsa_map_sg failed\n", __func__);

drivers/media/pci/cx25821/cx25821-alsa.c

327

pr_warn("WARNING %s/1: Audio risc op code error\n", dev->name);

drivers/media/pci/cx25821/cx25821-alsa.c

335

pr_warn("WARNING %s: Downstream sync error!\n", dev->name);

drivers/media/pci/cx25821/cx25821-core.c

573

pr_warn("%s: %s - dma channel status dump\n", dev->name, ch->name);

drivers/media/pci/cx25821/cx25821-core.c

575

pr_warn("cmds + 0x%2x: %-15s: 0x%08x\n",

drivers/media/pci/cx25821/cx25821-core.c

581

pr_warn("cmds + 0x%2x: risc%d: ", j + i * 4, i);

drivers/media/pci/cx25821/cx25821-core.c

589

pr_warn("ctrl + 0x%2x (0x%08x): iq %x: ",

drivers/media/pci/cx25821/cx25821-core.c

594

pr_warn("ctrl + 0x%2x : iq %x: 0x%08x [ arg #%d ]\n",

drivers/media/pci/cx25821/cx25821-core.c

599

pr_warn(" : fifo: 0x%08x -> 0x%x\n",

drivers/media/pci/cx25821/cx25821-core.c

601

pr_warn(" : ctrl: 0x%08x -> 0x%x\n",

drivers/media/pci/cx25821/cx25821-core.c

603

pr_warn(" : ptr1_reg: 0x%08x\n",

drivers/media/pci/cx25821/cx25821-core.c

605

pr_warn(" : ptr2_reg: 0x%08x\n",

drivers/media/pci/cx25821/cx25821-core.c

607

pr_warn(" : cnt1_reg: 0x%08x\n",

drivers/media/pci/cx25821/cx25821-core.c

609

pr_warn(" : cnt2_reg: 0x%08x\n",

drivers/media/pci/cx25821/cx25821-core.c

647

pr_warn("cmds + 0x%2x: risc%d: ", j + i * 4, i);

drivers/media/pci/cx25821/cx25821-core.c

655

pr_warn("ctrl + 0x%2x (0x%08x): iq %x: ",

drivers/media/pci/cx25821/cx25821-core.c

661

pr_warn("ctrl + 0x%2x : iq %x: 0x%08x [ arg #%d ]\n",

drivers/media/pci/cx25821/cx25821-core.c

666

pr_warn(" : fifo: 0x%08x -> 0x%x\n",

drivers/media/pci/cx25821/cx25821-core.c

668

pr_warn(" : ctrl: 0x%08x -> 0x%x\n",

drivers/media/pci/cx25821/cx25821-core.c

670

pr_warn(" : ptr1_reg: 0x%08x\n",

drivers/media/pci/cx25821/cx25821-core.c

672

pr_warn(" : ptr2_reg: 0x%08x\n",

drivers/media/pci/cx25821/cx25821-core.c

674

pr_warn(" : cnt1_reg: 0x%08x\n",

drivers/media/pci/cx25821/cx25821-core.c

676

pr_warn(" : cnt2_reg: 0x%08x\n",

drivers/media/pci/cx25821/cx25821-core.c

681

pr_warn("instruction %d = 0x%x\n", i, risc);

drivers/media/pci/cx25821/cx25821-core.c

686

pr_warn("\nread cdt loc=0x%x\n", risc);

drivers/media/pci/cx25821/cx25821-video.c

99

pr_warn("%s, %s: video risc op code error\n",

drivers/media/pci/cx25821/cx25821.h

366

pr_warn("(%d): " fmt, dev->board, ##args)

drivers/media/pci/cx88/cx88-alsa.c

221

pr_warn("Audio risc op code error\n");

drivers/media/pci/cx88/cx88-alsa.c

322

pr_warn("%s: cx88_alsa_map_sg failed\n", __func__);

drivers/media/pci/cx88/cx88-cards.c

2858

pr_warn("Leadtek eeprom invalid.\n");

drivers/media/pci/cx88/cx88-cards.c

2932

pr_warn("warning: unknown hauppauge model #%d\n", tv.model);

drivers/media/pci/cx88/cx88-cards.c

3137

pr_warn("dvico_fusionhdtv_hybrid_init buf %d failed (err = %d)!\n",

drivers/media/pci/cx88/cx88-cards.c

3543

pr_warn("Unable to enable tuner(%i).\n",

drivers/media/pci/cx88/cx88-dsp.c

181

pr_warn("unsupported audio mode %d for %s\n",

drivers/media/pci/cx88/cx88-mpeg.c

324

pr_warn("mpeg risc op code error\n");

drivers/media/pci/cx88/cx88-mpeg.c

375

pr_warn("irq loop -- clearing mask\n");

drivers/media/pci/cx88/cx88-mpeg.c

764

pr_warn("Trying to remove cx8802 driver while cx8802 sub-drivers still loaded?!\n");

drivers/media/pci/cx88/cx88-video.c

1076

pr_warn("video risc op code error\n");

drivers/media/pci/cx88/cx88-video.c

1120

pr_warn("irq loop -- clearing mask\n");

drivers/media/pci/ivtv/ivtv-alsa.h

58

pr_warn("%s-alsa: " fmt, v4l2_dev->name , ## args)

drivers/media/pci/ivtv/ivtvfb.c

1166

pr_warn("ivtvfb needs PAT disabled for write-combined framebuffer caching.\n");

drivers/media/pci/ivtv/ivtvfb.c

1167

pr_warn("Boot with nopat kernel parameter to use caching, or use the\n");

drivers/media/pci/ivtv/ivtvfb.c

1168

pr_warn("force_pat module parameter to run with caching disabled\n");

drivers/media/pci/saa7134/saa7134-alsa.c

304

pr_warn("%s: saa7134_alsa_map_sg failed\n", __func__);

drivers/media/pci/saa7134/saa7134-cards.c

7125

pr_warn("%s: there are different flyvideo cards with different tuners\n"

drivers/media/pci/saa7134/saa7134-cards.c

7398

pr_warn("%s: warning: unknown hauppauge model #%d\n",

drivers/media/pci/saa7134/saa7134-cards.c

7501

pr_warn("%s: seems there are two different versions of the MD5044\n"

drivers/media/pci/saa7134/saa7134-cards.c

7630

pr_warn("%s: %s: dual saa713x broadcast decoders\n"

drivers/media/pci/saa7134/saa7134-cards.c

7779

pr_warn("%s: board type fixup: %s\n", dev->name,

drivers/media/pci/saa7134/saa7134-cards.c

7977

pr_warn("%s: send wake up byte to pic16C505(IR chip) failed\n",

drivers/media/pci/saa7134/saa7134-cards.c

8026

pr_warn("%s: Unexpected tuner type info: %x in eeprom\n",

drivers/media/pci/saa7134/saa7134-cards.c

8048

pr_warn("%s: Unable to enable tuner(%i).\n",

drivers/media/pci/saa7134/saa7134-cards.c

8065

pr_warn("%s: Unable to enable IF of the tuner.\n",

drivers/media/pci/saa7134/saa7134-core.c

1075

pr_warn("%s: Oops: no 32bit PCI DMA ???\n", dev->name);

drivers/media/pci/saa7134/saa7134-core.c

596

pr_warn("%s/irq: looping -- clearing PE (parity error!) enable bit\n",

drivers/media/pci/saa7134/saa7134-core.c

601

pr_warn("%s/irq: looping -- clearing GPIO16 enable bit\n",

drivers/media/pci/saa7134/saa7134-core.c

607

pr_warn("%s/irq: looping -- clearing GPIO18 enable bit\n",

drivers/media/pci/saa7134/saa7134-core.c

613

pr_warn("%s/irq: looping -- clearing all enable bits\n",

drivers/media/pci/saa7134/saa7134-core.c

754

pr_warn("saa7134: <rant>\n"

drivers/media/pci/saa7134/saa7134-core.c

763

pr_warn("saa7134: Board is currently unknown. You might try to use the card=<nr>\n"

drivers/media/pci/saa7134/saa7134-core.c

770

pr_warn("saa7134: card=%d -> %-40.40s",

drivers/media/pci/saa7134/saa7134-dvb.c

1032

pr_warn("%s: sorry can't set high LNB supply voltage from here\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1423

pr_warn("%s: Lifeview Trio, No tda826x found!\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1430

pr_warn("%s: Lifeview Trio, No ISL6421 found!\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1446

pr_warn("no tda827x tuner found at addr: %02x\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1451

pr_warn("failed to attach tda10046\n");

drivers/media/pci/saa7134/saa7134-dvb.c

1474

pr_warn("%s: Medion Quadro, no tda826x found !\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1483

pr_warn("%s: Medion Quadro, no ISL6405 found !\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1543

pr_warn("%s: No tda826x found!\n", __func__);

drivers/media/pci/saa7134/saa7134-dvb.c

1549

pr_warn("%s: No ISL6421 found!\n", __func__);

drivers/media/pci/saa7134/saa7134-dvb.c

1617

pr_warn("%s: No tda826x found!\n", __func__);

drivers/media/pci/saa7134/saa7134-dvb.c

1622

pr_warn("%s: No lnbp21 found!\n", __func__);

drivers/media/pci/saa7134/saa7134-dvb.c

1654

pr_warn("%s: MD7134 DVB-S, no SD1878 found !\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1663

pr_warn("%s: MD7134 DVB-S, no ISL6405 found !\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1695

pr_warn("%s: Asus Tiger 3in1, no tda826x found!\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1701

pr_warn("%s: Asus Tiger 3in1, no lnbp21 found!\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1720

pr_warn("%s: Asus My Cinema PS3-100, no tda826x found!\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1726

pr_warn("%s: Asus My Cinema PS3-100, no lnbp21 found!\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1774

pr_warn("%s: No zl10036 found!\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1785

pr_warn("%s: No zl10039 found!\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1798

pr_warn("error attaching QT1010\n");

drivers/media/pci/saa7134/saa7134-dvb.c

1874

pr_warn("%s: No zl10039 found!\n",

drivers/media/pci/saa7134/saa7134-dvb.c

1892

pr_warn("Huh? unknown DVB card?\n");

drivers/media/pci/saa7134/saa7134-dvb.c

238

pr_warn("could not access the I2C gate\n");

drivers/media/pci/saa7134/saa7134-dvb.c

246

pr_warn("could not access the I2C gate\n");

drivers/media/pci/saa7134/saa7134-dvb.c

349

pr_warn("could not write to tuner at addr: 0x%02x\n",

drivers/media/pci/saa7134/saa7134-dvb.c

538

pr_warn("could not access tda8290 I2C gate\n");

drivers/media/pci/saa7134/saa7134-dvb.c

606

pr_warn("no tda827x tuner found at addr: %02x\n",

drivers/media/pci/saa7134/saa7134-i2c.c

394

pr_warn("%s: i2c eeprom read error (err=%d)\n",

drivers/media/pci/saa7134/saa7134-tvaudio.c

1021

pr_warn("%s: kernel_thread() failed\n",

drivers/media/pci/saa7134/saa7134-tvaudio.c

661

pr_warn("%s: dsp access error\n", dev->name);

drivers/media/pci/ttpci/budget-core.c

212

pr_warn("%s %s: used %d times >80%% of buffer (%u bytes now)\n",

drivers/media/platform/qcom/camss/camss-vfe-340.c

132

pr_warn("VFE: Invalid line %d\n", line_id);

drivers/media/platform/renesas/sh_vou.c

801

pr_warn("%s(): Invalid bus-format code %d, using default 8-bit\n",

drivers/media/platform/samsung/exynos4-is/media-dev.c

240

pr_warn("%s(): No sensor subdev\n", __func__);

drivers/media/platform/samsung/exynos4-is/media-dev.c

265

pr_warn("%s(): No sensor subdev\n", __func__);

drivers/media/platform/verisilicon/rockchip_vpu981_hw_av1_dec.c

1281

pr_warn("Fail allocating memory for film grain parameters\n");

drivers/media/platform/verisilicon/rockchip_vpu981_hw_av1_dec.c

748

pr_warn("AV1 invalid reference frame index\n");

drivers/media/platform/verisilicon/rockchip_vpu981_hw_av1_dec.c

792

pr_warn("AV1 invalid sign bias index\n");

drivers/media/rc/ene_ir.c

1036

pr_warn("Simulation of TX activated\n");

drivers/media/rc/ene_ir.c

108

pr_warn("device seems to be disabled\n");

drivers/media/rc/ene_ir.c

109

pr_warn("send a mail to lirc-list@lists.sourceforge.net\n");

drivers/media/rc/ene_ir.c

110

pr_warn("please attach output of acpidump and dmidecode\n");

drivers/media/rc/ene_ir.c

120

pr_warn("chips 0x33xx aren't supported\n");

drivers/media/rc/ene_ir.c

229

pr_warn("Error validating extra buffers, device probably won't work\n");

drivers/media/rc/ene_ir.c

585

pr_warn("TX: transmitter cable isn't connected!\n");

drivers/media/rc/ene_ir.c

612

pr_warn("TX: BUG: attempt to transmit NULL buffer\n");

drivers/media/tuners/fc0012.h

47

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/tuners/r820t.h

40

pr_warn("%s: driver disabled by Kconfig\n", __func__);

drivers/media/tuners/tea5767.c

376

pr_warn("It is not a TEA5767. Received %i bytes.\n", rc);

drivers/media/tuners/tea5767.c

383

pr_warn("All bytes are equal. It is not a TEA5767\n");

drivers/media/tuners/tea5767.c

393

pr_warn("Chip ID is not zero. It is not a TEA5767\n");

drivers/media/usb/au0828/au0828-cards.c

167

pr_warn("%s: warning: unknown hauppauge model #%d\n",

drivers/media/usb/au0828/au0828-dvb.c

621

pr_warn("The frontend of your DVB/ATSC card isn't supported yet\n");

drivers/media/usb/dvb-usb-v2/az6007.c

111

pr_warn("usb read operation failed. (%d)\n", ret);

drivers/media/usb/dvb-usb-v2/az6007.c

278

pr_warn("usb in operation failed. (%d)\n", ret);

drivers/media/usb/dvb-usb-v2/az6007.c

315

pr_warn("usb out operation failed. (%d)\n", ret);

drivers/media/usb/dvb-usb-v2/az6007.c

351

pr_warn("usb in operation failed. (%d)\n", ret);

drivers/media/usb/dvb-usb-v2/az6007.c

355

pr_warn("Read CI IO error\n");

drivers/media/usb/dvb-usb-v2/az6007.c

391

pr_warn("usb out operation failed. (%d)\n", ret);

drivers/media/usb/dvb-usb-v2/az6007.c

422

pr_warn("usb in operation failed. (%d)\n", ret);

drivers/media/usb/dvb-usb-v2/az6007.c

451

pr_warn("usb out operation failed. (%d)\n", ret);

drivers/media/usb/dvb-usb-v2/az6007.c

463

pr_warn("usb out operation failed. (%d)\n", ret);

drivers/media/usb/dvb-usb-v2/az6007.c

507

pr_warn("usb out operation failed. (%d)\n", ret);

drivers/media/usb/dvb-usb-v2/az6007.c

539

pr_warn("usb in operation failed. (%d)\n", ret);

drivers/media/usb/dvb-usb-v2/mxl111sf.c

60

pr_warn("%s: len=%d is too big!\n", __func__, wlen);

drivers/media/usb/dvb-usb/cxusb.c

1130

pr_warn("Unable to enumerate dib7000p\n");

drivers/media/usb/gspca/kinect.c

186

pr_warn("send_cmd: Data buffer is %d bytes long, but got %d bytes\n",

drivers/media/usb/gspca/kinect.c

213

pr_warn("send_cmd returned %d [%04x %04x], 0000 expected\n",

drivers/media/usb/gspca/kinect.c

395

pr_warn("[Stream %02x] Invalid magic %02x%02x\n",

drivers/media/usb/gspca/kinect.c

410

pr_warn("Packet type not recognized...\n");

drivers/media/usb/gspca/ov519.c

2795

pr_warn("WARNING: Sensor is an OV66308. Your camera may have been misdetected in previous driver versions.\n");

drivers/media/usb/gspca/ov519.c

2811

pr_warn("WARNING: Sensor is an OV66307. Your camera may have been misdetected in previous driver versions.\n");

drivers/media/usb/gspca/sn9c20x.c

1967

pr_warn("sn9c20x camera with unknown number of alt settings (%d), please report!\n",

drivers/media/usb/gspca/sonixj.c

1352

pr_warn("Erroneous HV7131R ID 0x%02x 0x%02x 0x%02x\n",

drivers/media/usb/gspca/topro.c

4071

pr_warn("Unknown sensor %d - forced to soi763a\n",

drivers/media/usb/gspca/zc3xx.c

6525

pr_warn("Unknown sensor - set to TAS5130C\n");

drivers/media/usb/s2255/s2255drv.c

1673

pr_warn("s2255: Not all channels available.\n");

drivers/media/usb/s2255/s2255drv.c

2300

pr_warn("2257 needs firmware %d or above.\n",

drivers/media/usb/s2255/s2255drv.c

2333

pr_warn("Sensoray 2255 driver load failed: 0x%x\n", retval);

drivers/media/usb/siano/smsusb.c

269

pr_warn("failed to open '%s' mode %d, trying again with default firmware\n",

drivers/media/usb/siano/smsusb.c

275

pr_warn("failed to open '%s' mode %d\n",

drivers/media/usb/stk1160/stk1160.h

64

pr_warn("stk1160: " fmt, ## args)

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

538

pr_warn("muxpack has invalid len %d\n", len);

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

546

pr_warn("muxpack with incorrect checksum, ignoring\n");

drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c

554

pr_warn("cc discontinuity (%d frames missing)\n",

drivers/media/v4l2-core/tuner-core.c

1041

pr_warn("tuner type not set\n");

drivers/media/v4l2-core/tuner-core.c

1045

pr_warn("tuner has no way to set radio frequency\n");

drivers/media/v4l2-core/tuner-core.c

243

pr_warn("Tuner frontend module has no way to set freq\n");

drivers/media/v4l2-core/tuner-core.c

265

pr_warn("Tuner frontend module has no way to set config\n");

drivers/media/v4l2-core/tuner-core.c

900

pr_warn("tuner type not set\n");

drivers/media/v4l2-core/tuner-core.c

904

pr_warn("Tuner has no way to set tv freq\n");

drivers/media/v4l2-core/tuner-core.c

969

pr_warn("pal= argument not recognised\n");

drivers/media/v4l2-core/tuner-core.c

995

pr_warn("secam= argument not recognised\n");

drivers/media/v4l2-core/v4l2-dev.c

1085

pr_warn("%s: requested %s%d, got %s\n", __func__,

drivers/media/v4l2-core/v4l2-dev.c

1227

pr_warn("videodev: unable to get major %d\n",

drivers/media/v4l2-core/v4l2-dev.c

1235

pr_warn("video_dev: class_register failed\n");

drivers/media/v4l2-core/v4l2-dev.c

875

pr_warn("%s: media_device_register_entity failed\n",

drivers/media/v4l2-core/v4l2-fwnode.c

179

pr_warn("duplicated lane %u in data-lanes, using defaults\n",

drivers/media/v4l2-core/v4l2-fwnode.c

192

pr_warn("invalid number of lane-polarities entries (need %u, got %u)\n",

drivers/media/v4l2-core/v4l2-fwnode.c

203

pr_warn("invalid number of line-orders entries (need %u, got %u)\n",

drivers/media/v4l2-core/v4l2-fwnode.c

219

pr_warn("duplicated lane %u in clock-lanes, using defaults\n",

drivers/media/v4l2-core/v4l2-fwnode.c

276

pr_warn("lane %u invalid line-order assuming ABC (got %u)\n",

drivers/media/v4l2-core/v4l2-fwnode.c

360

pr_warn("invalid argument for pclk-sample");

drivers/media/v4l2-core/v4l2-fwnode.c

531

pr_warn("unsupported bus type %u\n", mbus_type);

drivers/media/v4l2-core/v4l2-ioctl.c

3079

pr_warn("%s: has no ioctl_ops.\n",

drivers/memory/omap-gpmc.c

1523

pr_warn("%s: disabling cs %d mapped at 0x%x-0x%x\n",

drivers/memory/omap-gpmc.c

2027

pr_warn("%s: page/burst-length set but not used!\n",

drivers/mfd/cros_ec_dev.c

391

pr_warn(CROS_EC_DEV_NAME ": can't register driver: %d\n", ret);

drivers/mfd/db8500-prcmu.c

2335

pr_warn("prcmu: Unknown message header (%d) in mailbox %d\n",

drivers/mfd/lpc_ich.c

1153

pr_warn("Resource conflict(s) found affecting %s\n",

drivers/mfd/mfd-core.c

211

pr_warn("%s: Failed to locate of_node [id: %d]\n",

drivers/mfd/omap-usb-tll.c

188

pr_warn("Invalid port mode, using default\n");

drivers/mfd/twl4030-irq.c

288

pr_warn("twl4030: I2C error %d reading PIH ISR\n", ret);

drivers/mfd/twl4030-irq.c

387

pr_warn("twl4030: err %d initializing %s %s\n",

drivers/mfd/twl4030-irq.c

395

pr_warn("twl4030: write failed: %d\n",

drivers/mfd/twl4030-power.c

505

pr_warn("TWL4030: Bad order of scripts (sleep script before wakeup) Leads to boot failure on some boards\n");

drivers/mfd/twl4030-power.c

931

pr_warn("TWL4030 Unable to read registers\n");

drivers/mfd/twl6030-irq.c

173

pr_warn("twl6030_irq: I2C error %d reading PIH ISR\n", ret);

drivers/mfd/twl6030-irq.c

212

pr_warn("twl6030_irq: I2C error in clearing PIH ISR\n");

drivers/misc/ibmvmc.c

1155

pr_warn("ibmvmc: Reserve HMC: state_failed\n");

drivers/misc/ibmvmc.c

1160

pr_warn("ibmvmc: Reserve HMC: not state_ready\n");

drivers/misc/ibmvmc.c

1171

pr_warn("ibmvmc: buffers not ready for index %d\n",

drivers/misc/ibmvmc.c

1180

pr_warn("%s: free hmc not found\n", __func__);

drivers/misc/ibmvmc.c

1233

pr_warn("ibmvmc: sethmcid: invalid state to send open 0x%x\n",

drivers/misc/ibmvmc.c

1248

pr_warn("ibmvmc: sethmcid: no buffer available\n");

drivers/misc/ibmvmc.c

1341

pr_warn("ibmvmc: requestvmc: copy to user failed.\n");

drivers/misc/ibmvmc.c

1368

pr_warn("ibmvmc: ioctl: no session\n");

drivers/misc/ibmvmc.c

1383

pr_warn("ibmvmc: unknown ioctl 0x%x\n", cmd);

drivers/misc/ibmvmc.c

2316

pr_warn("ibmvmc: Max MTU reduced to %d\n", MAX_MTU);

drivers/misc/ibmvmc.c

2319

pr_warn("ibmvmc: Max MTU increased to %d\n", MIN_MTU);

drivers/misc/ibmvmc.c

2324

pr_warn("ibmvmc: Max buffer pool size reduced to %d\n",

drivers/misc/ibmvmc.c

2328

pr_warn("ibmvmc: Max buffer pool size increased to %d\n",

drivers/misc/ibmvmc.c

2334

pr_warn("ibmvmc: Max HMCs reduced to %d\n", MAX_HMCS);

drivers/misc/ibmvmc.c

2337

pr_warn("ibmvmc: Max HMCs increased to %d\n", MIN_HMCS);

drivers/misc/ibmvmc.c

923

pr_warn("ibmvmc: read: nbytes invalid 0x%x\n",

drivers/misc/ibmvmc.c

930

pr_warn("ibmvmc: read: no session\n");

drivers/misc/ibmvmc.c

936

pr_warn("ibmvmc: read: no hmc\n");

drivers/misc/ibmvmc.c

942

pr_warn("ibmvmc: read: no adapter\n");

drivers/misc/lkdtm/bugs.c

266

pr_warn("FAIL: did not correctly locate stack canary :(\n");

drivers/misc/lkdtm/bugs.c

272

pr_warn("WARNING: found both current and init_task canaries nearby?!\n");

drivers/misc/lkdtm/bugs.c

283

pr_warn("ERROR: saw pid %d again -- please use a new pid\n", pid);

drivers/misc/lkdtm/bugs.c

286

pr_warn("ERROR: canary offset changed from %ld to %ld!?\n",

drivers/misc/lkdtm/bugs.c

292

pr_warn("FAIL: canary identical for pid %d and pid %d at offset %ld!\n",

drivers/misc/lkdtm/bugs.c

500

pr_warn("This is expected since this %s was built with a compiler that does not support __counted_by\n",

drivers/misc/lkdtm/bugs.c

573

pr_warn("This is expected since this %s was built with a compiler that does not support __counted_by_ptr\n",

drivers/misc/lkdtm/cfi.c

107

pr_warn("Eek: return address mismatch! %px != %px\n",

drivers/misc/lkdtm/cfi.c

189

pr_warn("This is probably expected, since this %s was built *without* %s=y nor %s=y\n",

drivers/misc/lkdtm/cfi.c

91

pr_warn("Eek: return address mismatch! %px != %px\n",

drivers/misc/lkdtm/fortify.c

164

pr_warn("FAIL: strscpy() of 0 length did not return -E2BIG\n");

drivers/misc/lkdtm/fortify.c

168

pr_warn("FAIL: strscpy() did not return -E2BIG while src is truncated\n");

drivers/misc/lkdtm/fortify.c

172

pr_warn("FAIL: after strscpy() dst does not contain \"foob\" but \"%s\"\n",

drivers/misc/lkdtm/fortify.c

183

pr_warn("FAIL: strscpy() did not return 3 while src was copied entirely truncated\n");

drivers/misc/lkdtm/fortify.c

187

pr_warn("FAIL: after strscpy() dst does not contain \"foo\" but \"%s\"\n",

drivers/misc/lkdtm/fortify.c

194

pr_warn("FAIL: after strscpy() weird_dst does not contain \"hello\" but \"%s\"\n",

drivers/misc/lkdtm/heap.c

271

pr_warn("Reallocation missed clobbered memory.\n");

drivers/misc/lkdtm/heap.c

304

pr_warn("Reallocation missed clobbered memory.\n");

drivers/misc/lkdtm/lkdtm.h

17

pr_warn("This is probably expected, since this %s was built *without* " #kconfig "=y\n", \

drivers/misc/lkdtm/lkdtm.h

28

pr_warn("This is probably expected, since this %s was built with " #kconfig "=y but booted with '" param "=N'\n", \

drivers/misc/lkdtm/lkdtm.h

42

pr_warn("This is probably expected, as this %s was built *without* " #kconfig "=y and booted with '" param "=N'\n", \

drivers/misc/lkdtm/perms.c

219

pr_warn("Failed to allocate user memory\n");

drivers/misc/lkdtm/perms.c

240

pr_warn("Failed to allocate user memory\n");

drivers/misc/lkdtm/perms.c

245

pr_warn("copy_to_user failed\n");

drivers/misc/lkdtm/refcount.c

127

pr_warn("Still at %d: refcount_inc/add() must not inc-from-0\n",

drivers/misc/lkdtm/refcount.c

137

pr_warn("Negative detected: unsafely reset to max\n");

drivers/misc/lkdtm/refcount.c

16

pr_warn("Overflow detected: unsafely reset to max\n");

drivers/misc/lkdtm/refcount.c

165

pr_warn("Weird: refcount_dec_and_test() reported zero\n");

drivers/misc/lkdtm/refcount.c

180

pr_warn("Weird: refcount_sub_and_test() reported zero\n");

drivers/misc/lkdtm/refcount.c

195

pr_warn("Weird: refcount_sub_and_test() reported zero\n");

drivers/misc/lkdtm/refcount.c

210

pr_warn("Zero detected: unsafely reset to max\n");

drivers/misc/lkdtm/refcount.c

274

pr_warn("Saturation detected: unsafely reset to max\n");

drivers/misc/lkdtm/refcount.c

324

pr_warn("Weird: refcount_inc_not_zero() reported zero\n");

drivers/misc/lkdtm/refcount.c

336

pr_warn("Weird: refcount_add_not_zero() reported zero\n");

drivers/misc/lkdtm/refcount.c

348

pr_warn("Weird: refcount_dec_and_test() reported zero\n");

drivers/misc/lkdtm/refcount.c

360

pr_warn("Weird: refcount_sub_and_test() reported zero\n");

drivers/misc/lkdtm/refcount.c

67

pr_warn("Weird: refcount_inc_not_zero() reported zero\n");

drivers/misc/lkdtm/refcount.c

79

pr_warn("Weird: refcount_add_not_zero() reported zero\n");

drivers/misc/lkdtm/refcount.c

91

pr_warn("Zero detected: unsafely reset to max\n");

drivers/misc/lkdtm/refcount.c

94

pr_warn("Still at zero: refcount_inc/add() must not inc-from-0\n");

drivers/misc/lkdtm/usercopy.c

100

pr_warn("copy_to_user failed, but lacked Oops\n");

drivers/misc/lkdtm/usercopy.c

114

pr_warn("copy_from_user failed unexpectedly?!\n");

drivers/misc/lkdtm/usercopy.c

121

pr_warn("copy_from_user failed, but lacked Oops\n");

drivers/misc/lkdtm/usercopy.c

145

pr_warn("Failed to allocate kernel memory\n");

drivers/misc/lkdtm/usercopy.c

153

pr_warn("Failed to allocate user memory\n");

drivers/misc/lkdtm/usercopy.c

166

pr_warn("copy_to_user failed unexpectedly?!\n");

drivers/misc/lkdtm/usercopy.c

172

pr_warn("copy_to_user failed, but lacked Oops\n");

drivers/misc/lkdtm/usercopy.c

178

pr_warn("copy_from_user failed unexpectedly?!\n");

drivers/misc/lkdtm/usercopy.c

184

pr_warn("copy_from_user failed, but lacked Oops\n");

drivers/misc/lkdtm/usercopy.c

211

pr_warn("Failed to allocate kernel cache\n");

drivers/misc/lkdtm/usercopy.c

220

pr_warn("Failed to allocate buffer from whitelist cache\n");

drivers/misc/lkdtm/usercopy.c

229

pr_warn("Failed to allocate user memory\n");

drivers/misc/lkdtm/usercopy.c

243

pr_warn("copy_to_user failed unexpectedly?!\n");

drivers/misc/lkdtm/usercopy.c

249

pr_warn("copy_to_user failed, but lacked Oops\n");

drivers/misc/lkdtm/usercopy.c

255

pr_warn("copy_from_user failed unexpectedly?!\n");

drivers/misc/lkdtm/usercopy.c

261

pr_warn("copy_from_user failed, but lacked Oops\n");

drivers/misc/lkdtm/usercopy.c

319

pr_warn("Failed to allocate user memory\n");

drivers/misc/lkdtm/usercopy.c

327

pr_warn("copy_to_user failed unexpectedly?!\n");

drivers/misc/lkdtm/usercopy.c

335

pr_warn("copy_to_user failed, but lacked Oops\n");

drivers/misc/lkdtm/usercopy.c

358

pr_warn("Failed to allocate user memory\n");

drivers/misc/lkdtm/usercopy.c

379

pr_warn("Good, copy_to_user() failed, but lacked Oops(?!)\n");

drivers/misc/lkdtm/usercopy.c

85

pr_warn("Failed to allocate user memory\n");

drivers/misc/lkdtm/usercopy.c

93

pr_warn("copy_to_user failed unexpectedly?!\n");

drivers/misc/ocxl/link.c

243

pr_warn("Unresolved OpenCAPI xsl fault in kernel context\n");

drivers/misc/vmw_vmci/vmci_context.c

1014

pr_warn("Failed to get privilege flags for destination (handle=0x%x:0x%x)\n",

drivers/misc/vmw_vmci/vmci_context.c

109

pr_warn("Failed to allocate memory for VMCI context\n");

drivers/misc/vmw_vmci/vmci_context.c

299

pr_warn("Failed to allocate memory for datagram\n");

drivers/misc/vmw_vmci/vmci_context.c

808

pr_warn("Attempt to restore checkpoint with obsolete wellknown handles\n");

drivers/misc/vmw_vmci/vmci_datagram.c

180

pr_warn("Couldn't get privileges (handle=0x%x:0x%x)\n",

drivers/misc/vmw_vmci/vmci_datagram.c

346

pr_warn("Unknown route (%d) for datagram\n", route);

drivers/misc/vmw_vmci/vmci_datagram.c

76

pr_warn("Failed allocating memory for datagram entry\n");

drivers/misc/vmw_vmci/vmci_datagram.c

91

pr_warn("Failed to add new resource (handle=0x%x:0x%x), error: %d\n",

drivers/misc/vmw_vmci/vmci_doorbell.c

407

pr_warn("Failed allocating memory for datagram entry\n");

drivers/misc/vmw_vmci/vmci_doorbell.c

415

pr_warn("Failed to get context ID\n");

drivers/misc/vmw_vmci/vmci_doorbell.c

461

pr_warn("Failed to add new resource (handle=0x%x:0x%x), error: %d\n",

drivers/misc/vmw_vmci/vmci_driver.c

130

pr_warn("Failed to initialize guest personality (err=%d)\n",

drivers/misc/vmw_vmci/vmci_driver.c

143

pr_warn("Unable to initialize host personality (err=%d)\n",

drivers/misc/vmw_vmci/vmci_event.c

58

pr_warn("Unexpected free events occurring\n");

drivers/misc/vmw_vmci/vmci_host.c

1001

pr_warn("Module registration error (name=%s, major=%d, minor=%d, err=%d)\n",

drivers/misc/vmw_vmci/vmci_host.c

1005

pr_warn("Unable to initialize host personality\n");

drivers/misc/vmw_vmci/vmci_host.c

994

pr_warn("Failed to initialize VMCIContext (error%d)\n",

drivers/misc/vmw_vmci/vmci_queue_pair.c

1156

pr_warn("Error allocating pages for produce queue\n");

drivers/misc/vmw_vmci/vmci_queue_pair.c

1163

pr_warn("Error allocating pages for consume queue\n");

drivers/misc/vmw_vmci/vmci_queue_pair.c

1172

pr_warn("Error allocating memory in %s\n", __func__);

drivers/misc/vmw_vmci/vmci_queue_pair.c

1181

pr_warn("qp_alloc_ppn_set failed\n");

drivers/misc/vmw_vmci/vmci_queue_pair.c

1418

pr_warn("Failed to add new resource (handle=0x%x:0x%x), error: %d",

drivers/misc/vmw_vmci/vmci_queue_pair.c

1484

pr_warn("Failed to enqueue queue_pair %s event datagram for context (ID=0x%x)\n",

drivers/misc/vmw_vmci/vmci_queue_pair.c

1667

pr_warn("Failed to notify peer (ID=0x%x) of attach to queue pair (handle=0x%x:0x%x)\n",

drivers/misc/vmw_vmci/vmci_queue_pair.c

1987

pr_warn("Context (ID=0x%x) not attached to queue pair (handle=0x%x:0x%x)\n",

drivers/misc/vmw_vmci/vmci_queue_pair.c

2041

pr_warn("Failed to notify peer (ID=0x%x) of attach to queue pair (handle=0x%x:0x%x)\n",

drivers/misc/vmw_vmci/vmci_queue_pair.c

2148

pr_warn("Failed to unmap queue headers for queue pair (handle=0x%x:0x%x,result=%d)\n",

drivers/misc/vmw_vmci/vmci_queue_pair.c

2361

pr_warn("Failed to save queue headers for queue pair (handle=0x%x:0x%x,result=%d)\n",

drivers/misc/vmw_vmci/vmci_queue_pair.c

769

pr_warn("vmap failed\n");

drivers/misc/vmw_vmci/vmci_queue_pair.c

917

pr_warn("Failed to add new resource (handle=0x%x:0x%x), error: %d",

drivers/mmc/core/block.c

3253

pr_warn("%s: could not register RPMB device\n",

drivers/mmc/core/bus.c

158

pr_warn("%s: error %d during shutdown\n",

drivers/mmc/core/bus.c

189

pr_warn("%s: error %d during resume (card was removed?)\n",

drivers/mmc/core/core.c

1222

pr_warn("%s: cannot verify signal voltage switch\n",

drivers/mmc/core/core.c

2074

pr_warn("%s: tried to HW reset card, got error %d\n",

drivers/mmc/core/core.c

2091

pr_warn("%s: tried to SW reset card, got error %d\n",

drivers/mmc/core/core.c

553

pr_warn("%s: running CQE recovery\n", mmc_hostname(host));

drivers/mmc/core/mmc.c

1070

pr_warn("%s: switch to bus width %d failed\n",

drivers/mmc/core/mmc.c

1090

pr_warn("%s: switch to high-speed failed, err:%d\n",

drivers/mmc/core/mmc.c

1864

pr_warn("%s: Enabling HPI failed\n",

drivers/mmc/core/mmc.c

1892

pr_warn("%s: Cache is supported, but failed to turn on (%d)\n",

drivers/mmc/core/mmc.c

1910

pr_warn("%s: Enabling CMDQ failed\n",

drivers/mmc/core/mmc.c

312

pr_warn("%s: defines enhanced area without partition setting complete\n",

drivers/mmc/core/mmc.c

354

pr_warn("%s: has partition size defined without partition complete\n",

drivers/mmc/core/mmc.c

704

pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",

drivers/mmc/core/mmc.c

933

pr_warn("%s: Voltage range not supported for power class\n",

drivers/mmc/core/mmc.c

981

pr_warn("%s: power class selection to bus width %d ddr %d failed\n",

drivers/mmc/core/mmc_ops.c

1007

pr_warn("%s: BKOPS aborted\n", mmc_hostname(card->host));

drivers/mmc/core/mmc_ops.c

1009

pr_warn("%s: Error %d running bkops\n",

drivers/mmc/core/mmc_ops.c

1050

pr_warn("%s: Sanitize not supported\n", mmc_hostname(host));

drivers/mmc/core/mmc_ops.c

1072

pr_warn("%s: Sanitize aborted\n", mmc_hostname(host));

drivers/mmc/core/mmc_ops.c

445

pr_warn("%s: unexpected status %#x after switch\n",

drivers/mmc/core/mmc_ops.c

616

pr_warn("%s: unspecified timeout for CMD6 - use generic\n",

drivers/mmc/core/mmc_ops.c

886

pr_warn("%s: HPI error %d. Command response %#x\n",

drivers/mmc/core/sd.c

1127

pr_warn("%s: error %d reading PM func of ext reg\n",

drivers/mmc/core/sd.c

1168

pr_warn("%s: error %d reading PERF func of ext reg\n",

drivers/mmc/core/sd.c

1299

pr_warn("%s: non-supported SD ext reg layout\n",

drivers/mmc/core/sd.c

1352

pr_warn("%s: error %d writing Cache Flush bit\n",

drivers/mmc/core/sd.c

1368

pr_warn("%s: error %d reading Cache Flush bit\n",

drivers/mmc/core/sd.c

1398

pr_warn("%s: error %d writing Cache Enable bit\n",

drivers/mmc/core/sd.c

1666

pr_warn("%s: error %d reading status reg of PM func\n",

drivers/mmc/core/sd.c

1692

pr_warn("%s: error %d writing Power Off Notify bit\n",

drivers/mmc/core/sd.c

266

pr_warn("%s: card lacks mandatory SD Status function\n",

drivers/mmc/core/sd.c

276

pr_warn("%s: problem reading SD Status register\n",

drivers/mmc/core/sd.c

303

pr_warn("%s: SD Status: Invalid Allocation Unit size\n",

drivers/mmc/core/sd.c

331

pr_warn("%s: card lacks mandatory switch function, performance might suffer\n",

drivers/mmc/core/sd.c

354

pr_warn("%s: problem reading Bus Speed modes\n",

drivers/mmc/core/sd.c

407

pr_warn("%s: Problem switching card into high-speed mode!\n",

drivers/mmc/core/sd.c

439

pr_warn("%s: Problem setting drive strength!\n",

drivers/mmc/core/sd.c

520

pr_warn("%s: Problem setting bus speed mode!\n",

drivers/mmc/core/sd.c

609

pr_warn("%s: Problem setting current limit!\n",

drivers/mmc/core/sd.c

694

pr_warn("%s: ddr50 tuning failed\n",

drivers/mmc/core/sd.c

838

pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host));

drivers/mmc/core/sd.c

998

pr_warn("%s: host does not support reading read-only switch, assuming write-enable\n",

drivers/mmc/core/sd_uhs2.c

970

pr_warn("%s: card lacks mandatory switch function, performance might suffer\n",

drivers/mmc/core/sd_uhs2.c

987

pr_warn("%s: host does not support read-only switch, assuming write-enable\n",

drivers/mmc/core/sdio.c

277

pr_warn("%s: SDIO_CCCR_IF is invalid: 0x%02x\n",

drivers/mmc/core/sdio.c

677

pr_warn("%s: Skipping voltage switch\n", mmc_hostname(host));

drivers/mmc/core/sdio_bus.c

219

pr_warn("WARNING: driver %s did not remove its interrupt handler!\n",

drivers/mmc/core/sdio_cis.c

190

pr_warn("%s: card has broken SDIO 1.1 CIS, forcing SDIO 1.0\n",

drivers/mmc/core/sdio_irq.c

100

pr_warn("%s: pending IRQ with no handler\n",

drivers/mmc/core/sdio_irq.c

93

pr_warn("%s: pending IRQ for non-existent function\n",

drivers/mmc/core/sdio_uart.c

1029

pr_warn("%s: need info on UART class basic setup\n",

drivers/mmc/core/sdio_uart.c

1048

pr_warn("%s: can't find tuple 0x91 subtuple 0 (SUBTPL_SIOREG) for GPS class\n",

drivers/mmc/host/cqhci-core.c

955

pr_warn("%s: cqhci: Failed to clear tasks\n",

drivers/mmc/host/cqhci-core.c

984

pr_warn("%s: cqhci: Failed to halt\n", mmc_hostname(mmc));

drivers/mmc/host/mmc_hsq.c

307

pr_warn("could not stop mmc software queue\n");

drivers/mmc/host/sdhci-msm.c

2290

pr_warn("%s: 1.8/3V not supported for vqmmc\n",

drivers/mmc/host/sdhci-msm.c

394

pr_warn("%s: Card appears overclocked; req %u Hz, actual %lu Hz\n",

drivers/mmc/host/sdhci-of-arasan.c

1198

pr_warn("%s: Have regmap, but no soc-ctl-syscon\n",

drivers/mmc/host/sdhci-of-arasan.c

1237

pr_warn("%s: Have regmap, but no soc-ctl-syscon\n",

drivers/mmc/host/sdhci-of-arasan.c

1718

pr_warn("%s: Have regmap, but no soc-ctl-syscon\n",

drivers/mmc/host/sdhci-of-arasan.c

349

pr_warn("%s: Regmap write fail: %d\n",

drivers/mmc/host/sdhci-of-esdhc.c

702

pr_warn("%s: using unsupported clock division.\n",

drivers/mmc/host/sdhci-pci-gli.c

1379

pr_warn("%s: %s: Reset SDHC AHB and TL-AMBA failure.\n",

drivers/mmc/host/sdhci-pci-gli.c

665

pr_warn("%s: enable PCI MSI failed, error=%d\n",

drivers/mmc/host/sdhci-pci-o2micro.c

224

pr_warn("%s: HW tuning failed !\n",

drivers/mmc/host/sdhci-pci-o2micro.c

291

pr_warn("%s: DLL unlocked when dll_adjust_count is %d.\n",

drivers/mmc/host/sdhci-pci-o2micro.c

385

pr_warn("%s: DLL can't lock in 5ms after force L0 during tuning.\n",

drivers/mmc/host/sdhci-tegra.c

657

pr_warn("%s: Missing autocal timeout 3v3-pad drvs\n",

drivers/mmc/host/sdhci-tegra.c

668

pr_warn("%s: Missing autocal timeout 3v3-pad drvs\n",

drivers/mmc/host/sdhci-tegra.c

679

pr_warn("%s: Missing autocal timeout 1v8-pad drvs\n",

drivers/mmc/host/sdhci-tegra.c

690

pr_warn("%s: Missing autocal timeout 1v8-pad drvs\n",

drivers/mmc/host/sdhci.c

1229

pr_warn("Failed to request TX DMA channel.\n");

drivers/mmc/host/sdhci.c

1243

pr_warn("Failed to request RX DMA channel.\n");

drivers/mmc/host/sdhci.c

1908

pr_warn("%s: Invalid UHS-I mode selected\n",

drivers/mmc/host/sdhci.c

2484

pr_warn("%s: invalid driver type, default to driver type B\n",

drivers/mmc/host/sdhci.c

2663

pr_warn("%s: Switching to 3.3V signalling voltage failed\n",

drivers/mmc/host/sdhci.c

2676

pr_warn("%s: 3.3V regulator output did not become stable\n",

drivers/mmc/host/sdhci.c

2686

pr_warn("%s: Switching to 1.8V signalling voltage failed\n",

drivers/mmc/host/sdhci.c

2708

pr_warn("%s: 1.8V regulator output did not become stable\n",

drivers/mmc/host/sdhci.c

2718

pr_warn("%s: Switching to 1.2V signalling voltage failed\n",

drivers/mmc/host/sdhci.c

4120

pr_warn("%s: Failed to set 64-bit DMA mask.\n",

drivers/mmc/host/sdhci.c

4130

pr_warn("%s: Failed to set 32-bit DMA mask.\n",

drivers/mmc/host/sdhci.c

4362

pr_warn("%s: No suitable DMA available - falling back to PIO\n",

drivers/mmc/host/sdhci.c

4395

pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",

drivers/mmc/host/sdhci.c

4400

pr_warn("%s: unable to allocate aligned ADMA descriptor\n",

drivers/mmc/host/sdhci.c

4575

pr_warn("%s: Failed to enable vqmmc regulator: %d\n",

drivers/mmc/host/sdhci.c

4803

pr_warn("%s: Invalid maximum block size, assuming 512 bytes\n",

drivers/mmc/host/tifm_sd.c

945

pr_warn("%s : card gone, unexpectedly\n",

drivers/mmc/host/wbsd.c

1413

pr_warn(DRIVER_NAME ": Unable to allocate DMA %d - falling back on FIFO\n",

drivers/mmc/host/wbsd.c

1646

pr_warn(DRIVER_NAME ": Unable to confirm device presence - you may experience lock-ups\n");

drivers/mmc/host/wbsd.c

1668

pr_warn(DRIVER_NAME ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");

drivers/mmc/host/wbsd.c

1867

pr_warn(DRIVER_NAME ": PnP active but chip not configured! You probably have a buggy BIOS. Configuring chip manually.\n");

drivers/mmc/host/wbsd.c

794

pr_warn("%s: Data command %d is not supported by this controller\n",

drivers/mtd/chips/cfi_cmdset_0002.c

400

pr_warn("%s: Bad 38VF640x CFI data; adjusting sector size from 64 to 8KiB\n",

drivers/mtd/chips/cfi_cmdset_0002.c

411

pr_warn("%s: Bad S29GL064N CFI data; adjust from 64 to 128 sectors\n",

drivers/mtd/chips/cfi_cmdset_0002.c

423

pr_warn("%s: Bad S29GL032N CFI data; adjust from 127 to 63 sectors\n",

drivers/mtd/chips/cfi_cmdset_0002.c

438

pr_warn("%s: Bad S29NS512P CFI data; adjust to 512 sectors\n",

drivers/mtd/chips/cfi_probe.c

187

pr_warn("Bad S70GL02GS CFI data; adjust to detect 2 chips\n");

drivers/mtd/devices/bcm47xxsflash.c

355

pr_warn("Serial flash busy\n");

drivers/mtd/mtdcore.c

829

pr_warn("mtd: can't set mtd%d (%s) as root device - mtd must be builtin\n",

drivers/mtd/mtdoops.c

129

pr_warn("bad block at %08lx\n",

drivers/mtd/mtdoops.c

390

pr_warn("could not unregister kmsg_dumper\n");

drivers/mtd/mtdoops.c

98

pr_warn("erase of region [0x%llx, 0x%llx] on \"%s\" failed\n",

drivers/mtd/nand/core.c

206

pr_warn("failed to write BBM to block @%llx (err = %d)\n",

drivers/mtd/nand/core.c

263

pr_warn("attempt to erase a bad/reserved block @%llx\n",

drivers/mtd/nand/core.c

418

pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",

drivers/mtd/nand/raw/cs553x_nand.c

294

pr_warn("ioremap cs553x NAND @0x%08lx failed\n", adr);

drivers/mtd/nand/raw/diskonchip.c

1392

pr_warn("Possible DiskOnChip at 0x%lx failed TOGGLE test, dropping.\n", physadr);

drivers/mtd/nand/raw/diskonchip.c

875

pr_warn("ECC error scanning DOC at 0x%x\n", offs);

drivers/mtd/nand/raw/diskonchip.c

890

pr_warn("DiskOnChip %s Media Header not found.\n", id);

drivers/mtd/nand/raw/diskonchip.c

956

pr_warn("UnitSizeFactor=0x00 detected. Correct value is assumed to be 0x%02x.\n", mh->UnitSizeFactor);

drivers/mtd/nand/raw/nand_base.c

4570

pr_warn("%s: attempt to erase a bad block at 0x%08llx\n",

drivers/mtd/nand/raw/nand_base.c

5263

pr_warn("bus width %d instead of %d bits\n", busw ? 16 : 8,

drivers/mtd/nand/raw/nand_base.c

5594

pr_warn("No NAND device found\n");

drivers/mtd/nand/raw/nand_base.c

5802

pr_warn("Invalid NAND_ECC_PLACEMENT %d\n",

drivers/mtd/nand/raw/nand_base.c

6277

pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",

drivers/mtd/nand/raw/nand_base.c

6302

pr_warn("NAND_ECC_ENGINE_TYPE_NONE selected by board driver. This is not recommended!\n");

drivers/mtd/nand/raw/nand_base.c

6358

pr_warn("ECC parameters may be invalid in reference to underlying NAND chip\n");

drivers/mtd/nand/raw/nand_base.c

6383

pr_warn("WARNING: %s: the ECC used on your system (%db/%dB) is too weak compared to the one required by the NAND chip (%db/%dB)\n",

drivers/mtd/nand/raw/nand_base.c

892

pr_warn("%s timing mode %d not acknowledged by the NAND chip\n",

drivers/mtd/nand/raw/nand_bbt.c

1375

pr_warn("Bad block pattern already allocated; not replacing\n");

drivers/mtd/nand/raw/nand_bbt.c

506

pr_warn("create_bbt(): chipnr (%d) > available chips (%d)\n",

drivers/mtd/nand/raw/nand_bbt.c

527

pr_warn("Bad eraseblock %d at 0x%012llx\n",

drivers/mtd/nand/raw/nand_bbt.c

611

pr_warn("Bad block table not found for chip %d\n", i);

drivers/mtd/nand/raw/nand_bbt.c

728

pr_warn("nand_bbt: error %d while marking block %d bad\n",

drivers/mtd/nand/raw/nand_bbt.c

831

pr_warn("nand_bbt: ECC error while reading block for writing bad block table\n");

drivers/mtd/nand/raw/nand_bbt.c

893

pr_warn("nand_bbt: error while erasing BBT block %d\n",

drivers/mtd/nand/raw/nand_bbt.c

903

pr_warn("nand_bbt: error while writing BBT block %d\n",

drivers/mtd/nand/raw/nand_bbt.c

918

pr_warn("nand_bbt: error while writing bad block table %d\n", res);

drivers/mtd/nand/raw/nand_hynix.c

402

pr_warn("failed to initialize read-retry infrastructure");

drivers/mtd/nand/raw/nand_jedec.c

133

pr_warn("Invalid codeword size\n");

drivers/mtd/nand/raw/nand_onfi.c

202

pr_warn("Could not find a valid ONFI parameter page, trying bit-wise majority to recover it\n");

drivers/mtd/nand/raw/nand_onfi.c

292

pr_warn("Failed to detect ONFI extended param page\n");

drivers/mtd/nand/raw/nand_onfi.c

294

pr_warn("Could not retrieve ONFI ECC requirements\n");

drivers/mtd/nand/raw/nandsim.c

176

do { pr_warn(" warning: " args); } while(0)

drivers/mtd/parsers/bcm47xxpart.c

127

pr_warn("Reached maximum number of partitions, scanning stopped!\n");

drivers/mtd/parsers/bcm47xxpart.c

188

pr_warn("No enough space to store another TRX found at 0x%X\n",

drivers/mtd/parsers/bcm47xxpart.c

254

pr_warn("Reached maximum number of partitions, scanning stopped!\n");

drivers/mtd/parsers/bcm63xxpart.c

66

pr_warn("nvram checksum failed, contents may be invalid (expected %08x, got %08x)\n",

drivers/mtd/parsers/cmdlinepart.c

363

pr_warn("%s: partitioning exceeds flash size, truncating\n",

drivers/mtd/parsers/cmdlinepart.c

370

pr_warn("%s: skipping zero sized partition\n",

drivers/mtd/parsers/ofpart_core.c

151

pr_warn("%s: ofpart partition %pOF (%pOF) #size-cells is wrongly set to <0>, assuming <1> for parsing partitions.\n",

drivers/mtd/parsers/ofpart_core.c

248

pr_warn("Device tree uses obsolete partition map binding: %pOF\n", dp);

drivers/mtd/parsers/ofpart_linksys_ns.c

23

pr_warn("Failed to parse %s value \"%s\"\n", NVRAM_BOOT_PART,

drivers/mtd/parsers/ofpart_linksys_ns.c

26

pr_warn("Failed to get NVRAM \"%s\"\n", NVRAM_BOOT_PART);

drivers/mtd/parsers/parser_imagetag.c

54

pr_warn("%s: CFE image tag at 0x%llx CRC invalid (expected %08x, actual %08x)\n",

drivers/mtd/parsers/sharpslpart.c

351

pr_warn("sharpslpart: first partition table is invalid, retry using the second\n");

drivers/mtd/parsers/tplink_safeloader.c

110

pr_warn("Reached maximum number of partitions!\n");

drivers/mtd/ubi/block.c

110

pr_warn("UBI: block: empty 'block=' parameter - ignored\n");

drivers/mtd/ubi/block.c

334

pr_warn("UBI: block: volume size is not a multiple of 512, last %llu bytes are ignored!\n",

drivers/mtd/ubi/build.c

1496

pr_warn("UBI warning: empty 'mtd=' parameter - ignored\n");

drivers/mtd/ubi/debug.c

254

pr_warn("UBI error: cannot create \"fault_inject\" debugfs directory, error %d\n",

drivers/mtd/ubi/misc.c

171

pr_warn(UBI_NAME_STR "%d warning: %ps: %pV\n",

drivers/net/bonding/bond_debugfs.c

84

pr_warn("Warning: Cannot create bonding directory in debugfs\n");

drivers/net/bonding/bond_main.c

6147

pr_warn("ad_select param only affects 802.3ad mode\n");

drivers/net/bonding/bond_main.c

6153

pr_warn("Warning: max_bonds (%d) not in range %d-%d, so it was reset to BOND_DEFAULT_MAX_BONDS (%d)\n",

drivers/net/bonding/bond_main.c

6159

pr_warn("Warning: miimon module parameter (%d), not in range 0-%d, so it was reset to 0\n",

drivers/net/bonding/bond_main.c

6165

pr_warn("Warning: updelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",

drivers/net/bonding/bond_main.c

6171

pr_warn("Warning: downdelay module parameter (%d), not in range 0-%d, so it was reset to 0\n",

drivers/net/bonding/bond_main.c

6183

pr_warn("Warning: num_grat_arp/num_unsol_na (%d) not in range 0-255 so it was reset to 1\n",

drivers/net/bonding/bond_main.c

6191

pr_warn("Warning: miimon must be specified, otherwise bonding will not detect link failure, speed and duplex which are essential for 802.3ad operation\n");

drivers/net/bonding/bond_main.c

6192

pr_warn("Forcing miimon to 100msec\n");

drivers/net/bonding/bond_main.c

6198

pr_warn("Warning: tx_queues (%d) should be between 1 and 255, resetting to %d\n",

drivers/net/bonding/bond_main.c

6204

pr_warn("Warning: all_slaves_active module parameter (%d), not of valid value (0/1), so it was set to 0\n",

drivers/net/bonding/bond_main.c

6210

pr_warn("Warning: resend_igmp (%d) should be between 0 and 255, resetting to %d\n",

drivers/net/bonding/bond_main.c

6217

pr_warn("Warning: packets_per_slave (%d) should be between 0 and %u resetting to 1\n",

drivers/net/bonding/bond_main.c

6232

pr_warn("Warning: miimon module parameter not set and updelay (%d) or downdelay (%d) module parameter is set; updelay and downdelay have no effect unless miimon is set\n",

drivers/net/bonding/bond_main.c

6238

pr_warn("Warning: miimon (%d) and arp_interval (%d) can't be used simultaneously, disabling ARP monitoring\n",

drivers/net/bonding/bond_main.c

6244

pr_warn("Warning: updelay (%d) is not a multiple of miimon (%d), updelay rounded to %d ms\n",

drivers/net/bonding/bond_main.c

6251

pr_warn("Warning: downdelay (%d) is not a multiple of miimon (%d), downdelay rounded to %d ms\n",

drivers/net/bonding/bond_main.c

6260

pr_warn("Warning: arp_interval module parameter (%d), not in range 0-%d, so it was reset to 0\n",

drivers/net/bonding/bond_main.c

6272

pr_warn("Warning: bad arp_ip_target module parameter (%s), ARP monitoring will not be performed\n",

drivers/net/bonding/bond_main.c

6279

pr_warn("Warning: duplicate address %pI4 in arp_ip_target, skipping\n",

drivers/net/bonding/bond_main.c

6286

pr_warn("Warning: arp_interval module parameter (%d) specified without providing an arp_ip_target parameter, arp_interval was reset to 0\n",

drivers/net/bonding/bond_main.c

6347

pr_warn("Warning: %s primary device specified but has no effect in %s mode\n",

drivers/net/bonding/bond_main.c

6377

pr_warn("Warning: fail_over_mac only affects active-backup mode\n");

drivers/net/bonding/bond_main.c

6409

pr_warn("Warning: ip_interval must be between 1 and %d, so it was reset to %d\n",

drivers/net/bonding/bond_procfs.c

319

pr_warn("Warning: Cannot create /proc/net/%s\n",

drivers/net/ethernet/3com/3c509.c

689

pr_warn("%s: transmit timed out, Tx_status %2.2x status %4.4x Tx FIFO room %d\n",

drivers/net/ethernet/3com/3c515.c

1372

pr_warn("%s: Warning -- the skbuff addresses do not match in boomerang_rx: %p vs. %p / %p\n",

drivers/net/ethernet/3com/3c515.c

504

pr_warn("pnp activate failed (out of resources?)\n");

drivers/net/ethernet/3com/3c515.c

650

pr_warn(" *** Warning: this IRQ is unlikely to work! ***\n");

drivers/net/ethernet/3com/3c515.c

957

pr_warn("%s: transmit timed out, tx_status %2.2x status %4.4x\n",

drivers/net/ethernet/3com/3c515.c

962

pr_warn("%s: Transmitter encountered 16 collisions -- network cable problem?\n",

drivers/net/ethernet/3com/3c59x.c

1306

pr_warn(" *** Warning: IRQ %d is unlikely to work! ***\n",

drivers/net/ethernet/3com/3c59x.c

1421

pr_warn(" ***WARNING*** No MII transceivers found!\n");

drivers/net/ethernet/3com/3c59x.c

1561

pr_warn("%s: Could not enable device\n", dev->name);

drivers/net/ethernet/3com/3c59x.c

1989

pr_warn("%s: Updating statistics failed, disabling stats as an interrupt source\n",

drivers/net/ethernet/3com/3c59x.c

2139

pr_warn("%s: BUG! Tx Ring full, refusing to send buffer\n",

drivers/net/ethernet/3com/3c59x.c

2337

pr_warn("%s: Too much work in interrupt, status %4.4x\n",

drivers/net/ethernet/3com/3c59x.c

2473

pr_warn("%s: Too much work in interrupt, status %4.4x\n",

drivers/net/ethernet/3com/3c59x.c

2747

pr_warn("%s supports hardware checksums, and we're not using them!\n",

drivers/net/ethernet/amd/ariadne.c

412

pr_warn("Couldn't find AMD Ethernet Chip\n");

drivers/net/ethernet/amd/ariadne.c

416

pr_warn("Couldn't find Am79C960 (Wrong part number = %ld)\n",

drivers/net/ethernet/aquantia/atlantic/aq_macsec.c

126

pr_warn("Rotate_keys: invalid key_len\n");

drivers/net/ethernet/broadcom/b44.c

408

pr_warn("PHY: cannot reset MII transceiver isolate bit\n");

drivers/net/ethernet/broadcom/bcm63xx_enet.c

2295

pr_warn("invalid forced speed on port %s: assume 10\n",

drivers/net/ethernet/broadcom/cnic.c

555

pr_warn("%s: Failed waiting for ref count to go to zero\n",

drivers/net/ethernet/broadcom/genet/bcmgenet.c

3819

pr_warn("GENET is reporting EPHY revision: 0x%04x\n",

drivers/net/ethernet/broadcom/genet/bcmgenet.c

3824

pr_warn("Invalid GPHY revision detected: 0x%04x\n", gphy_rev);

drivers/net/ethernet/broadcom/genet/bcmgenet.c

3836

pr_warn("GENET does not support 40-bits PA\n");

drivers/net/ethernet/cavium/thunder/thunder_bgx.c

1435

pr_warn("Invalid link device\n");

drivers/net/ethernet/chelsio/cxgb/cxgb2.c

1092

pr_warn("%s: cannot register net device %s, skipping\n",

drivers/net/ethernet/chelsio/cxgb3/cxgb3_main.c

1431

pr_warn("Could not initialize offload capabilities\n");

drivers/net/ethernet/chelsio/cxgb4vf/cxgb4vf_main.c

3421

pr_warn("bad module parameter msi=%d; must be %d (MSI-X or MSI) or %d (MSI)\n",

drivers/net/ethernet/chelsio/inline_crypto/chtls/chtls_io.c

229

pr_warn("MAX IVs in PAGE exceeded %d\n", number_of_ivs);

drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c

231

pr_warn("ippm: idx too big %u > %u.\n", idx, ppm->ppmax);

drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c

237

pr_warn("ippm: idx %u, npods 0.\n", idx);

drivers/net/ethernet/chelsio/libcxgb/libcxgb_ppm.c

258

pr_warn("%s: pages %u -> npods %u, full.\n",

drivers/net/ethernet/cirrus/cs89x0.c

1442

pr_warn("No EEPROM, relying on command line....\n");

drivers/net/ethernet/cirrus/cs89x0.c

1444

pr_warn("EEPROM read failed, relying on command line\n");

drivers/net/ethernet/cirrus/cs89x0.c

1450

pr_warn("Extended EEPROM checksum bad and no Cirrus EEPROM, relying on command line\n");

drivers/net/ethernet/cirrus/cs89x0.c

1686

pr_warn("no cs8900 or cs8920 detected. Be sure to disable PnP with SETUP\n");

drivers/net/ethernet/cirrus/cs89x0.c

978

pr_warn("%s: 10Base-T (RJ-45) has no cable\n",

drivers/net/ethernet/cirrus/cs89x0.c

987

pr_warn("%s: 10Base-5 (AUI) has no cable\n", dev->name);

drivers/net/ethernet/cirrus/cs89x0.c

995

pr_warn("%s: 10Base-2 (BNC) has no cable\n", dev->name);

drivers/net/ethernet/dec/tulip/de2104x.c

1731

pr_warn("timeout reading 21040 MAC address byte %u\n",

drivers/net/ethernet/dec/tulip/dmfe.c

384

pr_warn("32-bit PCI DMA not available\n");

drivers/net/ethernet/dec/tulip/eeprom.c

222

pr_warn("%s: no phy info, aborting mtable build\n",

drivers/net/ethernet/dec/tulip/tulip_core.c

1910

pr_warn("tulip: unknown CPU architecture, using default csr0\n");

drivers/net/ethernet/dec/tulip/uli526x.c

287

pr_warn("32-bit PCI DMA not available\n");

drivers/net/ethernet/dec/tulip/uli526x.c

531

pr_warn("Can not find the phy address!!!\n");

drivers/net/ethernet/dec/tulip/winbond-840.c

369

pr_warn("Device %s disabled due to DMA limitations\n",

drivers/net/ethernet/emulex/benet/be_main.c

6115

pr_warn(DRV_NAME "workqueue creation failed\n");

drivers/net/ethernet/emulex/benet/be_main.c

6122

pr_warn(DRV_NAME "Could not create error recovery workqueue\n");

drivers/net/ethernet/freescale/fman/fman.c

2440

pr_warn("Invalid fsl_fm_max_frm value (%d) in bootargs, valid range is %d-%d. Falling back to the default (%d)\n",

drivers/net/ethernet/freescale/fman/fman.c

2466

pr_warn("Invalid fsl_fm_rx_extra_headroom value (%d) in bootargs, valid range is %d-%d. Falling back to the default (%d)\n",

drivers/net/ethernet/freescale/fman/fman_dtsec.c

848

pr_warn("pause-time: %d illegal.Should be > 320\n",

drivers/net/ethernet/freescale/fman/fman_memac.c

428

pr_warn("Uninitialize event handler\n");

drivers/net/ethernet/freescale/ucc_geth.c

1602

pr_warn("TBI mode requires that the device tree specify a tbi-handle\n");

drivers/net/ethernet/freescale/ucc_geth.c

1606

pr_warn("Could not get TBI device\n");

drivers/net/ethernet/freescale/ucc_geth.c

2943

pr_warn("No Rx Data Buffer\n");

drivers/net/ethernet/freescale/ucc_geth.c

415

pr_warn("%s: Invalid paddr_num: %u\n", __func__, paddr_num);

drivers/net/ethernet/lantiq_etop.c

581

pr_warn("etop: invalid MAC, using random\n");

drivers/net/ethernet/marvell/skge.c

1117

pr_warn("%s: phy read timed out\n", hw->dev[port]->name);

drivers/net/ethernet/marvell/skge.c

1913

pr_warn("%s: phy write timeout\n", hw->dev[port]->name);

drivers/net/ethernet/marvell/skge.c

1941

pr_warn("%s: phy read timeout\n", hw->dev[port]->name);

drivers/net/ethernet/marvell/sky2.c

2788

pr_warn("unknown status opcode 0x%x\n", opcode);

drivers/net/ethernet/mellanox/mlx4/en_main.c

402

pr_warn("mlx4_en: WARNING: illegal module parameter pfctx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n",

drivers/net/ethernet/mellanox/mlx4/en_main.c

408

pr_warn("mlx4_en: WARNING: illegal module parameter pfcrx 0x%x - should be in range 0-0x%x, will be changed to default (0)\n",

drivers/net/ethernet/mellanox/mlx4/en_main.c

414

pr_warn("mlx4_en: WARNING: illegal module parameter inline_thold %d - should be in range %d-%d, will be changed to default (%d)\n",

drivers/net/ethernet/mellanox/mlx4/main.c

4188

pr_warn("Removing PF when there are active VF's !!\n");

drivers/net/ethernet/mellanox/mlx4/main.c

4189

pr_warn("Will not disable SR-IOV.\n");

drivers/net/ethernet/mellanox/mlx4/main.c

4501

pr_warn("mlx4_core: bad msi_x: %d\n", msi_x);

drivers/net/ethernet/mellanox/mlx4/main.c

4506

pr_warn("mlx4_core: bad num_mac: %d\n", log_num_mac);

drivers/net/ethernet/mellanox/mlx4/main.c

4511

pr_warn("mlx4_core: log_num_vlan - obsolete module param, using %d\n",

drivers/net/ethernet/mellanox/mlx4/main.c

4515

pr_warn("mlx4_core: use_prio - obsolete module param, ignored\n");

drivers/net/ethernet/mellanox/mlx4/main.c

4518

pr_warn("mlx4_core: bad log_mtts_per_seg: %d\n",

drivers/net/ethernet/mellanox/mlx4/main.c

4525

pr_warn("Module parameter configuration ETH/IB is not supported. Switching to default configuration IB/IB\n");

drivers/net/ethernet/mellanox/mlx4/main.c

4533

pr_warn("mlx4_core: mlx4_log_num_mgm_entry_size (%d) not in legal range (-7..0 or %d..%d)\n",

drivers/net/ethernet/mellanox/mlx4/mlx4_en.h

841

pr_warn(DRV_NAME " %s: " format, \

drivers/net/ethernet/mellanox/mlx4/resource_tracker.c

4411

pr_warn("Can't attach FS rule without L2 headers, adding L2 header\n");

drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c

190

pr_warn("mlx5: Cannot generate tunnel header for this tunnel\n");

drivers/net/ethernet/mellanox/mlx5/core/fs_core.c

515

pr_warn("mlx5_core: match_value differs from match_criteria\n");

drivers/net/ethernet/mellanox/mlx5/core/fs_core.c

530

pr_warn("mlx5: flow steering node is not in tree or garbaged\n");

drivers/net/ethernet/mellanox/mlx5/core/main.c

2357

pr_warn("mlx5_core: WARNING: Invalid module parameter prof_sel %d, valid range 0-%zu, changing back to default(%d)\n",

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/action.c

118

pr_warn("HWS: Invalid stc_type: %d\n", stc_type);

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/action.c

151

pr_warn("HWS: Invalid shared stc_type: %d\n", stc_type);

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/action.c

156

pr_warn("HWS: Invalid action->flags: %d\n", action->flags);

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/action.c

179

pr_warn("HWS: Invalid shared stc_type: %d\n", stc_type);

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/action.c

1998

pr_warn("HWS: Invalid action type: %d\n", action->type);

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/action.c

2596

pr_warn("HWS: Invalid action type in processingaction template: action_type[%d]=%d\n",

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/cmd.c

28

pr_warn("HWS: unknown flow dest type %d\n", type);

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/cmd.c

365

pr_warn("HWS: no flow table ID for default miss\n");

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/context.c

254

pr_warn("HWS: failed storing peer vhca ID in peer xarray\n");

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/definer.c

2222

pr_warn("HWS: failed putting definer object\n");

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/internal.h

47

pr_warn("HWS: invalid buffer of size 0 in %s\n", __func__);

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/pat_arg.c

224

pr_warn("HWS: pattern ID %d is not found\n", ptrn_id);

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/pat_arg.c

501

pr_warn("HWS: invalid modify header action type %d\n", action_type);

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/rule.c

141

pr_warn("HWS: resize info isn't allocated for rule\n");

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/rule.c

799

pr_warn("HWS: Invalid rule creation parameters (MTs, ATs or match params)\n");

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/rule.c

89

pr_warn("HWS: invalid tbl->type: %d\n", tbl->type);

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/table.c

107

pr_warn("HWS: invalid table type %d\n", tbl->type);

drivers/net/ethernet/mellanox/mlx5/core/steering/hws/table.c

190

pr_warn("HWS: invalid table type %d\n", tbl->type);

drivers/net/ethernet/microchip/lan743x_main.c

3715

pr_warn("Initialization failed\n");

drivers/net/ethernet/microchip/vcap/vcap_api.c

2679

pr_warn("%s:%d: keyfield %s is already in the rule\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

2847

pr_warn("%s:%d: actionfield %s is already in the rule\n",

drivers/net/ethernet/microchip/vcap/vcap_api.c

829

pr_warn("%s:%d: no actionfields in the rule\n",

drivers/net/ethernet/netronome/nfp/bpf/jit.c

50

pr_warn("instruction limit reached (%u NFP instructions)\n",

drivers/net/ethernet/netronome/nfp/flower/conntrack.c

1679

pr_warn("WARNING: could not remove merge_entry from hashtable\n");

drivers/net/ethernet/netronome/nfp/nfpcore/nfp_rtsym.c

215

pr_warn("rtsym '%s': unknown type: %d\n", sym->name, sym->type);

drivers/net/ethernet/packetengines/yellowfin.c

700

pr_warn(" Rx ring %p: ", yp->rx_ring);

drivers/net/ethernet/packetengines/yellowfin.c

704

pr_warn(" Tx ring %p: ", yp->tx_ring);

drivers/net/ethernet/pensando/ionic/ionic_aux.c

100

pr_warn("%s request_reset: error %d\n", __func__, err);

drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c

1448

pr_warn("%s: chip revisions between 0x%x-0x%x will not be enabled\n",

drivers/net/ethernet/smsc/smsc911x.c

2435

pr_warn("Could not allocate resource\n");

drivers/net/ethernet/smsc/smsc911x.c

2446

pr_warn("Could not allocate irq resource\n");

drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c

297

pr_warn("%s: unexpected status %08x\n", __func__, intr_status);

drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c

234

pr_warn("%s: unexpected status %08x\n", __func__, intr_status);

drivers/net/ethernet/stmicro/stmmac/stmmac_main.c

261

pr_warn("stmmac: module parameter 'flow_ctrl' is obsolete - please remove from your module configuration\n");

drivers/net/ethernet/sun/cassini.c

4903

pr_warn("Could not enable MWI for %s\n", pci_name(pdev));

drivers/net/ethernet/sun/niu.c

8747

pr_warn("niu%d: Driver bug, wasted channels, RX[%d] TX[%d]\n",

drivers/net/ethernet/via/via-rhine.c

2616

pr_warn("Broken BIOS detected, avoid_D3 enabled\n");

drivers/net/fddi/defza.c

1021

pr_warn("%s: halted, reason: %x\n", fp->name,

drivers/net/fddi/defza.c

1032

pr_warn("%s: undefined state: %x\n", fp->name, state);

drivers/net/fddi/defza.c

305

pr_warn("%s: command buffer full, command: %u!\n", fp->name,

drivers/net/ieee802154/fakelb.c

249

pr_warn("fakelb driver is marked as deprecated, please use mac802154_hwsim!\n");

drivers/net/ieee802154/mrf24j40.c

605

pr_warn("mrf24j40: ed not implemented\n");

drivers/net/mctp/mctp-i2c.c

1147

pr_warn("MCTP I2C could not unregister notifier, %d\n", rc);

drivers/net/mctp/mctp-i3c.c

756

pr_warn("MCTP I3C could not unregister notifier, %d\n", rc);

drivers/net/mdio/of_mdio.c

126

pr_warn(FW_WARN

drivers/net/ovpn/crypto.c

124

pr_warn("Invalid slot to release: %u\n", slot);

drivers/net/phy/swphy.c

100

pr_warn("swphy: unknown speed\n");

drivers/net/veth.c

1351

pr_warn("Can't restore rx queues config %d -> %d %d",

drivers/net/wan/c101.c

373

pr_warn("unable to register hdlc device\n");

drivers/net/wan/farsync.c

1598

pr_warn("Port count mismatch on card %d. Firmware thinks %d we say %d\n",

drivers/net/wan/n2.c

460

pr_warn("unable to register hdlc device\n");

drivers/net/wan/pc300too.c

415

pr_warn("could not allocate IRQ%d\n", pdev->irq);

drivers/net/wan/pci200syn.c

359

pr_warn("could not allocate IRQ%d\n", pdev->irq);

drivers/net/wan/wanxl.c

653

pr_warn("%s: timeout waiting for PUTS to complete\n",

drivers/net/wan/wanxl.c

665

pr_warn("%s: PUTS test 0x%X failed\n",

drivers/net/wan/wanxl.c

683

pr_warn("%s: no enough on-board RAM (%u bytes detected, %u bytes required)\n",

drivers/net/wan/wanxl.c

692

pr_warn("%s: unable to Set Byte Swap Mode\n", pci_name(pdev));

drivers/net/wan/wanxl.c

728

pr_warn("%s: unable to Abort and Jump\n", pci_name(pdev));

drivers/net/wan/wanxl.c

742

pr_warn("%s: timeout while initializing card firmware\n",

drivers/net/wan/wanxl.c

757

pr_warn("%s: could not allocate IRQ%i\n",

drivers/net/wireless/ath/ath12k/wifi7/core.c

43

pr_warn("Failed to initialize ath12k Wi-Fi 7 AHB device: %d\n",

drivers/net/wireless/ath/ath12k/wifi7/core.c

48

pr_warn("Failed to initialize ath12k Wi-Fi 7 PCI device: %d\n",

drivers/net/wireless/ath/ath5k/ath5k.h

81

pr_warn("%s: " fmt, __func__, ##__VA_ARGS__)

drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c

4504

pr_warn("brcmf_watchdog thread failed to start\n");

drivers/net/wireless/intel/ipw2x00/libipw_crypto_tkip.c

474

pr_warn("%s(): tfm_michael == NULL\n", __func__);

drivers/net/wireless/marvell/mwifiex/usb.c

422

pr_warn("unknown id_product %#x\n", id_product);

drivers/net/wireless/marvell/mwifiex/wmm.c

566

pr_warn("Have pending ack frames!\n");

drivers/net/wireless/microchip/wilc1000/wlan.c

578

pr_warn("FW not responding\n");

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

439

pr_warn("VIF%u.%u: failed to %sregister qlink frame type 0x%x\n",

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

703

pr_warn("unexpected bssid: %pM", auth->bssid);

drivers/net/wireless/quantenna/qtnfmac/cfg80211.c

832

pr_warn("%s: failed to switch to channel (%u)\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1000

pr_warn("MAC%u: unsupported WoWLAN version 0x%x\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

101

pr_warn("VIF%u.%u: drop cmd 0x%.4X in fw state %d\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1065

pr_warn("MAC%u: no combinations advertised\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1071

pr_warn("MAC%u: combinations count exceeded\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1081

pr_warn("MAC%u: record %zu size mismatch\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1127

pr_warn("MAC%u: skip empty WoWLAN data\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1134

pr_warn("MAC%u: WoWLAN data size mismatch\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1145

pr_warn("unexpected number of rules: %u\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1151

pr_warn("malformed TLV 0x%.2X; LEN: %u\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1161

pr_warn("MAC%u: unknown TLV type %u\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1185

pr_warn("unexpected number of rules: expected %u got %u\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

136

pr_warn("VIF%u.%u: cmd 0x%.4X failed: %d\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

1502

pr_warn("unknown TLV type: %#x\n", tlv_type);

drivers/net/wireless/quantenna/qtnfmac/commands.c

26

pr_warn("VIF%u.%u CMD%x: bad cmd_id in response: 0x%.4X\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

2743

pr_warn("VIF%u.%u: OWE update IEs too big: %zu\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

32

pr_warn("VIF%u.%u CMD%x: bad MAC in response: %u\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

38

pr_warn("VIF%u.%u CMD%x: bad VIF in response: %u\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

422

pr_warn("VIF%u.%u: frame is too big: %zu\n", vif->mac->macid,

drivers/net/wireless/quantenna/qtnfmac/commands.c

44

pr_warn("VIF%u.%u CMD%x: bad response size %u < %zu\n",

drivers/net/wireless/quantenna/qtnfmac/commands.c

457

pr_warn("VIF%u.%u: %u frame is too big: %zu\n", vif->mac->macid,

drivers/net/wireless/quantenna/qtnfmac/commands.c

858

pr_warn("VIF%u.%u: unsupported iftype %d\n", vif->mac->macid,

drivers/net/wireless/quantenna/qtnfmac/core.c

150

pr_warn("VIF%u.%u: Tx timeout- %lu\n", mac->macid, vif->vifid, jiffies);

drivers/net/wireless/quantenna/qtnfmac/core.c

372

pr_warn("MAC%d: scan timed out\n", mac->macid);

drivers/net/wireless/quantenna/qtnfmac/event.c

174

pr_warn("MAC%u.%u: bad channel freq=%u cf1=%u cf2=%u bw=%u\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

188

pr_warn("VIF%u.%u: add missing BSS:%pM chan:%u\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

193

pr_warn("VIF%u.%u: SSID unknown for BSS:%pM\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

202

pr_warn("VIF%u.%u: IE alloc failed for BSS:%pM\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

221

pr_warn("VIF%u.%u: can't connect to unknown BSS: %pM\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

241

pr_warn("invalid IE_SET TLV\n");

drivers/net/wireless/quantenna/qtnfmac/event.c

258

pr_warn("unexpected IE type: %u\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

266

pr_warn("Malformed TLV buffer\n");

drivers/net/wireless/quantenna/qtnfmac/event.c

548

pr_warn("%s: unhandled radar event %u\n",

drivers/net/wireless/quantenna/qtnfmac/event.c

590

pr_warn("failed to offload external auth request\n");

drivers/net/wireless/quantenna/qtnfmac/event.c

749

pr_warn("unknown event type: %x\n", event_id);

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

201

pr_warn("failed to enable MSI interrupts");

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

206

pr_warn("legacy PCIE interrupts enabled\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pcie.c

242

pr_warn("zero length packet received\n");

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

1006

pr_warn("FW upload retry: block #%d\n", blk);

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

414

pr_warn("invalid tx_bd_size value %u, use default %u\n",

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

427

pr_warn("invalid rx_bd_size value %u, use default %u\n",

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

733

pr_warn("skip invalid rxbd[%d]\n", r_idx);

drivers/net/wireless/quantenna/qtnfmac/pcie/pearl_pcie.c

738

pr_warn("skip missing rx_skb[%d]\n", r_idx);

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

347

pr_warn("TX BD queue cannot exceed %d\n",

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

359

pr_warn("RX BD queue cannot exceed %d\n",

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

639

pr_warn("skip invalid rxbd[%d]\n", r_idx);

drivers/net/wireless/quantenna/qtnfmac/pcie/topaz_pcie.c

644

pr_warn("skip missing rx_skb[%d]\n", r_idx);

drivers/net/wireless/quantenna/qtnfmac/trans.c

121

pr_warn("event dropped due to queue overflow\n");

drivers/net/wireless/quantenna/qtnfmac/trans.c

174

pr_warn("packet is too small: %u\n", skb->len);

drivers/net/wireless/quantenna/qtnfmac/trans.c

180

pr_warn("cmd reply length mismatch: %u != %u\n",

drivers/net/wireless/quantenna/qtnfmac/trans.c

189

pr_warn("cmd reply too short: %u\n", skb->len);

drivers/net/wireless/quantenna/qtnfmac/trans.c

198

pr_warn("event too short: %u\n", skb->len);

drivers/net/wireless/quantenna/qtnfmac/trans.c

206

pr_warn("unknown packet type: %x\n", le16_to_cpu(header->type));

drivers/net/wireless/realtek/rtlwifi/usb.c

260

pr_warn("%s: bulk in endpoint is not the first in endpoint\n",

drivers/net/wireless/realtek/rtlwifi/usb.c

271

pr_warn("%s: found more bulk out endpoints than the expected %d\n",

drivers/net/wireless/realtek/rtlwifi/usb.c

964

pr_warn("rtl_usb: ieee80211 alloc failed\n");

drivers/net/wireless/silabs/wfx/data_tx.c

454

pr_warn("vif associated with the skb does not exist anymore\n");

drivers/net/wireless/st/cw1200/sta.c

1026

pr_warn("Unhandled BT INACTIVE from LMAC\n");

drivers/net/wireless/st/cw1200/sta.c

1029

pr_warn("Unhandled BT ACTIVE from LMAC\n");

drivers/net/wireless/st/cw1200/sta.c

1074

pr_warn("Malformed sdd structure\n");

drivers/net/wireless/st/cw1200/sta.c

1081

pr_warn("SDD_PTA_CFG_ELT_ID malformed\n");

drivers/net/wireless/st/cw1200/sta.c

1098

pr_warn("SDD file doesn't match configured refclk (%d vs %d)\n",

drivers/net/wireless/st/cw1200/sta.c

1222

pr_warn("[STA] - Join request already pending, skipping..\n");

drivers/net/wireless/st/cw1200/sta.c

811

pr_warn("Unhandled key type %d\n", key->cipher);

drivers/net/wireless/st/cw1200/sta.c

834

pr_warn("Unhandled key command %d\n", cmd);

drivers/net/wireless/st/cw1200/txrx.c

1123

pr_warn("Unknown encryption type %d\n",

drivers/net/wireless/st/cw1200/wsm.c

1024

pr_warn("Implement find_complete_indication\n");

drivers/net/wireless/st/cw1200/wsm.c

1443

pr_warn("Unrecognised WSM ID %04x\n", id);

drivers/net/wireless/ti/wlcore/debug.h

54

pr_warn(DRIVER_PREFIX "WARNING " fmt "\n", ##arg)

drivers/net/xen-netback/interface.c

501

pr_warn("Could not allocate netdev for %s\n", name);

drivers/net/xen-netback/interface.c

652

pr_warn("Could not setup irq handler for %s\n", dev->name);

drivers/net/xen-netback/interface.c

782

pr_warn("Could not allocate kthread for %s\n", queue->name);

drivers/net/xen-netback/xenbus.c

133

pr_warn("Unknown command to io_ring_q%d. Available: kick\n",

drivers/net/xen-netback/xenbus.c

497

pr_warn("Failed to parse network rate limit. Traffic unlimited.\n");

drivers/net/xen-netfront.c

1140

pr_warn("GSO size must not be zero\n");

drivers/net/xen-netfront.c

1147

pr_warn("Bad GSO type %d\n", gso->u.gso.type);

drivers/net/xen-netfront.c

1619

pr_warn("Error writing xdp-headroom\n");

drivers/net/xen-netfront.c

2452

pr_warn("%s: register_netdev err=%d\n", __func__, err);

drivers/nubus/nubus.c

775

pr_warn("Slot %X: Dodgy doffset!\n", slot);

drivers/nubus/nubus.c

778

pr_warn("Slot %X: Wrong test pattern %08lx!\n", slot, dpat);

drivers/nubus/nubus.c

811

pr_warn("Slot %X: Board resource ID is invalid!\n", slot);

drivers/nvme/common/auth.c

250

pr_warn("No key specified\n");

drivers/nvme/common/auth.c

262

pr_warn("Invalid key hash id %d\n", key->hash);

drivers/nvme/common/auth.c

351

pr_warn("%s: invalid hash algorithm %d\n",

drivers/nvme/common/auth.c

503

pr_warn("%s: invalid hash algorithm %d\n",

drivers/nvme/common/auth.c

602

pr_warn("%s: invalid hash algorithm %d\n",

drivers/nvme/common/auth.c

615

pr_warn("%s: invalid hash algorithm '%s'\n",

drivers/nvme/common/auth.c

780

pr_warn("%s: invalid hash algorithm %d\n",

drivers/nvme/common/auth.c

785

pr_warn("%s: unsupported hash algorithm %s\n",

drivers/nvme/host/apple.c

418

pr_warn("sg[%d] phys_addr:%pad offset:%d length:%d dma_address:%pad dma_length:%d\n",

drivers/nvme/host/core.c

2154

pr_warn("%s: ignoring unaligned IO boundary:%u\n",

drivers/nvme/host/core.c

2161

pr_warn("%s: ignoring zoned namespace IO boundary\n",

drivers/nvme/host/fabrics.c

1068

pr_warn("unknown parameter or missing value '%s' in ctrl creation request\n",

drivers/nvme/host/fabrics.c

1090

pr_warn("failfast tmo (%d) larger than controller loss tmo (%d)\n",

drivers/nvme/host/fabrics.c

1208

pr_warn("missing parameter '%s'\n",

drivers/nvme/host/fabrics.c

1271

pr_warn("invalid parameter '%s'\n",

drivers/nvme/host/fabrics.c

846

pr_warn("keep_alive_tmo 0 won't execute keep alives!!!\n");

drivers/nvme/host/fabrics.c

857

pr_warn("ctrl_loss_tmo < 0 will reconnect forever\n");

drivers/nvme/host/fabrics.c

867

pr_warn("I/O fail on reconnect controller after %d sec\n",

drivers/nvme/host/fabrics.c

989

pr_warn("Clamping type of service to 255\n");

drivers/nvme/host/fault_inject.c

32

pr_warn("%s: failed to create debugfs directory\n", dev_name);

drivers/nvme/host/fault_inject.c

39

pr_warn("%s: failed to create debugfs attr\n", dev_name);

drivers/nvme/host/fc.c

3672

pr_warn("%s: bad traddr string\n", __func__);

drivers/nvme/host/fc.c

3723

pr_warn("%s: %s - %s combination not found\n",

drivers/nvme/host/tcp.c

1497

pr_warn("queue %d: failed to send icreq, error %d\n",

drivers/nvme/host/tcp.c

1515

pr_warn("queue %d: failed to receive icresp, error %d\n",

drivers/nvme/target/auth.c

126

pr_warn("ctrl %d failed to allocate public key\n",

drivers/nvme/target/auth.c

133

pr_warn("ctrl %d failed to generate public key\n",

drivers/nvme/target/auth.c

176

pr_warn("Failed to setup DH group");

drivers/nvme/target/auth.c

306

pr_warn("Hash ID %d invalid\n", ctrl->shash_id);

drivers/nvme/target/auth.c

413

pr_warn("Hash ID %d invalid\n", ctrl->shash_id);

drivers/nvme/target/auth.c

44

pr_warn("Invalid DH-HMAC-CHAP hash id %d\n",

drivers/nvme/target/auth.c

517

pr_warn("ctrl %d no DH public key!\n", ctrl->cntlid);

drivers/nvme/target/auth.c

521

pr_warn("ctrl %d DH public key size mismatch, need %zu is %d\n",

drivers/nvme/target/auth.c

573

pr_warn("%s: ctrl %d qid %d failed to generate PSK, error %d\n",

drivers/nvme/target/auth.c

581

pr_warn("%s: ctrl %d qid %d failed to generate digest, error %d\n",

drivers/nvme/target/auth.c

588

pr_warn("%s: ctrl %d qid %d failed to derive TLS PSK, error %d\n",

drivers/nvme/target/auth.c

598

pr_warn("%s: ctrl %d qid %d failed to refresh key, error %ld\n",

drivers/nvme/target/configfs.c

2038

pr_warn("NVMe keyring not available, disabling TLS\n");

drivers/nvme/target/configfs.c

213

pr_warn("Allow non-TLS connections while TLS1.3 is enabled\n");

drivers/nvme/target/core.c

1470

pr_warn("connect request for invalid subsystem %s!\n",

drivers/nvme/target/core.c

1480

pr_warn("hostnqn mismatch.\n");

drivers/nvme/target/core.c

1492

pr_warn("could not find controller %d for subsys %s / host %s\n",

drivers/nvme/target/core.c

1518

pr_warn("qid %d not authenticated\n", req->sq->qid);

drivers/nvme/target/core.c

1594

pr_warn("connect request for invalid subsystem %s!\n",

drivers/nvme/target/debugfs.c

219

pr_warn("%s: failed to create debugfs directory\n", "nvmet");

drivers/nvme/target/fabrics-cmd-auth.c

161

pr_warn("ctrl %d qid %d no host key\n",

drivers/nvme/target/fabrics-cmd-auth.c

362

pr_warn("ctrl %d qid %d: authentication failed (%d)\n",

drivers/nvme/target/fabrics-cmd-auth.c

461

pr_warn("ctrl %d qid %d no ctrl key\n",

drivers/nvme/target/fabrics-cmd-auth.c

538

pr_warn("ctrl %d qid %d: challenge error (%d)\n",

drivers/nvme/target/fabrics-cmd-auth.c

551

pr_warn("ctrl %d qid %d: success1 status (%x)\n",

drivers/nvme/target/fabrics-cmd-auth.c

561

pr_warn("ctrl %d qid %d failure1 (%x)\n",

drivers/nvme/target/fabrics-cmd-auth.c

565

pr_warn("ctrl %d qid %d unhandled step (%d)\n",

drivers/nvme/target/fabrics-cmd.c

182

pr_warn("queue size zero!\n");

drivers/nvme/target/fabrics-cmd.c

190

pr_warn("qid %u has already been created\n", qid);

drivers/nvme/target/fabrics-cmd.c

197

pr_warn("sqsize %u is larger than MQES supported %u cntlid %d\n",

drivers/nvme/target/fabrics-cmd.c

206

pr_warn("queue already connected!\n");

drivers/nvme/target/fabrics-cmd.c

214

pr_warn("queue already connected!\n");

drivers/nvme/target/fabrics-cmd.c

294

pr_warn("invalid connect version (%d).\n",

drivers/nvme/target/fabrics-cmd.c

302

pr_warn("connect attempt for invalid controller ID %#x\n",

drivers/nvme/target/fabrics-cmd.c

358

pr_warn("invalid connect version (%d).\n",

drivers/nvme/target/fabrics-cmd.c

374

pr_warn("invalid queue id (%d)\n", qid);

drivers/nvme/target/fc.c

2859

pr_warn("%s: bad traddr string\n", __func__);

drivers/nvme/target/fc.c

3015

pr_warn("%s: targetport list not empty\n", __func__);

drivers/nvme/target/fcloop.c

124

pr_warn("unknown parameter or missing value '%s'\n", p);

drivers/nvme/target/fcloop.c

175

pr_warn("unknown parameter or missing value '%s'\n", p);

drivers/nvme/target/fcloop.c

1761

pr_warn("%s: Failed deleting target port\n",

drivers/nvme/target/fcloop.c

1768

pr_warn("%s: Failed deleting remote port\n",

drivers/nvme/target/fcloop.c

1787

pr_warn("%s: Failed deleting local port\n", __func__);

drivers/nvme/target/passthru.c

399

pr_warn("target host has requested different behaviour from the local host\n");

drivers/nvme/target/passthru.c

624

pr_warn("nvme controller version is too old: %llu.%llu.%llu, advertising 1.2.1\n",

drivers/nvme/target/pr.c

977

pr_warn("the reservation type is set wrong, type:%d\n",

drivers/nvme/target/rdma.c

1218

pr_warn("inline_data_size %d cannot be supported by device %s. Reducing to %lu.\n",

drivers/nvme/target/rdma.c

1229

pr_warn("T10-PI is not supported by device %s. Disabling it\n",

drivers/nvme/target/rdma.c

1635

pr_warn("trying to establish a connected queue\n");

drivers/nvme/target/rdma.c

1951

pr_warn("inline_data_size %u is too large, reducing to %u\n",

drivers/nvme/target/rdma.c

1960

pr_warn("max_queue_size %u is too large, reducing to %u\n",

drivers/nvme/target/tcp.c

1157

pr_warn("queue %d: TLS Alert desc %u\n",

drivers/nvme/target/tcp.c

1678

pr_warn("queue %d unhandled state %d\n",

drivers/nvme/target/tcp.c

1796

pr_warn("%s: queue %d failed to lookup key %x\n",

drivers/nvme/target/tcp.c

1846

pr_warn("queue %d: TLS handshake timeout\n", queue->idx);

drivers/nvme/target/tcp.c

1869

pr_warn("cannot start TLS in state %d\n", queue->state);

drivers/nvme/target/tcp.c

2010

pr_warn("failed to accept err=%d\n", ret);

drivers/nvmem/imx-ocotp-scu.c

200

pr_warn("ECC region, only program once\n");

drivers/nvmem/imx-ocotp-scu.c

207

pr_warn("ECC region, already has value: %x\n", tmp);

drivers/of/fdt.c

1075

pr_warn("failed to mark hotplug range 0x%llx - 0x%llx\n",

drivers/of/fdt.c

115

pr_warn("Cannot locate property at 0x%x\n", cur);

drivers/of/fdt.c

1154

pr_warn("Ignoring memory block 0x%llx - 0x%llx\n",

drivers/of/fdt.c

1166

pr_warn("Ignoring memory block 0x%llx - 0x%llx\n",

drivers/of/fdt.c

1172

pr_warn("Ignoring memory range 0x%llx - 0x%llx\n",

drivers/of/fdt.c

1178

pr_warn("Ignoring memory block 0x%llx - 0x%llx\n",

drivers/of/fdt.c

1183

pr_warn("Ignoring memory range 0x%llx - 0x%llx\n",

drivers/of/fdt.c

120

pr_warn("Cannot find property name at 0x%x\n", cur);

drivers/of/fdt.c

1225

pr_warn("No chosen node found, continuing without\n");

drivers/of/fdt.c

1330

pr_warn("not creating '/sys/firmware/fdt': CRC check failed\n");

drivers/of/fdt.c

404

pr_warn("End of tree marker overwritten: %08x\n",

drivers/of/fdt.c

480

pr_warn("elfcorehdr is overlapped\n");

drivers/of/fdt.c

971

pr_warn("earlycon: stdout-path %.*s not found\n", l, p);

drivers/of/kobj.c

57

pr_warn("Duplicate name in %s, renamed to \"%s\"\n",

drivers/of/of_numa.c

163

pr_warn("Invalid \"numa-node-id\" property in node %pOFn\n",

drivers/of/of_numa.c

34

pr_warn("Node id %u exceeds maximum value\n", nid);

drivers/of/of_numa.c

58

pr_warn("Node id %u exceeds maximum value\n", nid);

drivers/of/property.c

55

pr_warn("%pOF: Read of boolean property '%s' with a value.\n", np, propname);

drivers/of/unittest.c

2118

pr_warn("%s: testcases is empty\n", __func__);

drivers/of/unittest.c

2132

pr_warn("%s: unflatten testcases tree failed\n", __func__);

drivers/of/unittest.c

2136

pr_warn("%s: testcases tree is empty\n", __func__);

drivers/of/unittest.c

2154

pr_warn("%s: no live tree to attach sub-tree\n", __func__);

drivers/of/unittest.c

2601

pr_warn("%s: of_overlay_remove() for overlay \"%s\" failed, ret = %d\n",

drivers/opp/core.c

1949

pr_warn("%s: OPP minuV: %lu maxuV: %lu, not supported by regulator\n",

drivers/opp/core.c

2061

pr_warn("%s: OPP not supported by required OPP %pOF (%lu)\n",

drivers/parisc/dino.c

484

pr_warn("%s: HP HSC-PCI Cards with card-mode Dino not yet supported.\n",

drivers/parisc/led.c

510

pr_warn("PDC reported unknown LCD/LED model %d\n",

drivers/parport/ieee1284_ops.c

582

pr_warn("%s: command ignored (%02x)\n",

drivers/parport/parport_gsc.c

309

pr_warn("%s: irq %d in use, resorting to polled operation\n",

drivers/parport/parport_gsc.c

339

pr_warn("IRQ not found for parallel device at 0x%llx\n",

drivers/parport/parport_ip32.c

1341

pr_warn(PPIP32 "%s: lost interrupt in %s\n",

drivers/parport/parport_ip32.c

2067

pr_warn(PPIP32 "%s: error: FIFO disabled\n", p->name);

drivers/parport/parport_ip32.c

2079

pr_warn(PPIP32 "%s: error: IRQ disabled\n", p->name);

drivers/parport/parport_ip32.c

2092

pr_warn(PPIP32 "%s: error: DMA disabled\n", p->name);

drivers/parport/parport_pc.c

1664

pr_warn("0x%lx: Unsupported pword size!\n", pb->base);

drivers/parport/parport_pc.c

1668

pr_warn("0x%lx: Unsupported pword size!\n", pb->base);

drivers/parport/parport_pc.c

1671

pr_warn("0x%lx: Unknown implementation ID\n", pb->base);

drivers/parport/parport_pc.c

2206

pr_warn("%s: irq %d in use, resorting to polled operation\n",

drivers/parport/parport_pc.c

2216

pr_warn("%s: dma %d in use, resorting to PIO operation\n",

drivers/parport/parport_pc.c

2226

pr_warn("%s: cannot get buffer for DMA, resorting to PIO operation\n",

drivers/parport/parport_pc.c

2600

pr_warn("parport_pc: Strange, can't probe VIA parallel port: io=0x%X, irq=%d, dma=%d\n",

drivers/parport/parport_pc.c

3256

pr_warn("parport_pc: irq specified without base address. Use 'io=' to specify one\n");

drivers/parport/parport_pc.c

3266

pr_warn("parport_pc: dma specified without base address. Use 'io=' to specify one\n");

drivers/parport/parport_pc.c

3305

pr_warn("parport=%s not understood\n", str);

drivers/parport/probe.c

61

pr_warn("%s probe: memory squeeze\n", port->name);

drivers/parport/probe.c

96

pr_warn("%s probe: warning, class '%s' not understood\n",

drivers/parport/share.c

1145

pr_warn("%s: %s tried to release parport when not owner\n",

drivers/parport/share.c

514

pr_warn("%s: fix this legacy no-device port driver!\n",

drivers/parport/share.c

983

pr_warn("%s: %s released port when preempted!\n",

drivers/pci/controller/cadence/pcie-cadence.h

290

pr_warn("Address %p and size %d are not aligned\n", addr, size);

drivers/pci/controller/cadence/pcie-cadence.h

308

pr_warn("Address %p and size %d are not aligned\n", addr, size);

drivers/pci/controller/pci-ftpci100.c

171

pr_warn("truncated PCI memory base\n");

drivers/pci/controller/pci-hyperv.c

2453

pr_warn("pci_create slot %s failed\n", name);

drivers/pci/controller/pci-rcar-gen2.c

223

pr_warn("unknown window size %ld - defaulting to 256M\n",

drivers/pci/hotplug/acpiphp_glue.c

321

pr_warn("Slot %llu already registered by another hotplug driver\n", sun);

drivers/pci/hotplug/acpiphp_glue.c

323

pr_warn("acpiphp_register_hotplug_slot failed (err code = 0x%x)\n", retval);

drivers/pci/hotplug/cpqphp_pci.c

221

pr_warn("missing feature: bridge scan recursion not implemented\n");

drivers/pci/of.c

261

pr_warn("device node is NULL, trying with of_chosen\n");

drivers/pci/of.c

269

pr_warn("Incorrect value for linux,pci-probe-only in %pOF, ignoring\n",

drivers/pci/pci-acpi.c

219

pr_warn("%s: Type 0 Revision %d record not supported\n",

drivers/pci/pci-acpi.c

268

pr_warn("%s: Type 1 Revision %d record not supported\n",

drivers/pci/pci-acpi.c

419

pr_warn("%s: Type 2 Revision %d record not supported\n",

drivers/pci/pci-stub.c

70

pr_warn("pci-stub: invalid ID string \"%s\"\n", id);

drivers/pci/pci-stub.c

80

pr_warn("pci-stub: failed to add dynamic ID (%d)\n",

drivers/pci/probe.c

2544

pr_warn("pci %04x:%02x:%02x.%d: not ready after %dms; giving up\n",

drivers/perf/arm_dsu_pmu.c

682

pr_warn("Failed to set irq affinity to %d\n", cpu);

drivers/perf/arm_pmu.c

648

pr_warn("unable to set irq affinity (irq=%d, cpu=%u)\n",

drivers/perf/arm_pmu_acpi.c

106

pr_warn("ACPI: %s: must be homogeneous\n", pdev->name);

drivers/perf/arm_pmu_acpi.c

116

pr_warn("ACPI: %s Unable to register interrupt: %d\n", pdev->name, gsi);

drivers/perf/arm_pmu_acpi.c

158

pr_warn("ACPI: SPE: Unable to register device\n");

drivers/perf/arm_pmu_acpi.c

191

pr_warn("ACPI: TRBE: Unable to register device\n");

drivers/perf/arm_pmu_acpi.c

208

pr_warn("Unable to parse ACPI PMU IRQ for CPU%d: %d\n",

drivers/perf/arm_pmu_acpi.c

212

pr_warn("No ACPI PMU IRQ for CPU%d\n", cpu);

drivers/perf/arm_pmu_acpi.c

288

pr_warn("mismatched PPIs detected\n");

drivers/perf/arm_pmu_acpi.c

392

pr_warn("Unable to allocate PMU for CPU%d\n",

drivers/perf/arm_pmu_acpi.c

407

pr_warn("Unable to initialise PMU for CPU%d\n", cpu);

drivers/perf/arm_pmu_acpi.c

414

pr_warn("Unable to allocate PMU name for CPU%d\n", cpu);

drivers/perf/arm_pmu_acpi.c

420

pr_warn("Failed to register PMU for CPU%d\n", cpu);

drivers/perf/riscv_pmu_sbi.c

699

pr_warn("failed to disable snapshot shared memory\n");

drivers/perf/riscv_pmu_sbi.c

729

pr_warn("pmu snapshot setup failed with error %ld\n", ret.error);

drivers/pinctrl/aspeed/pinctrl-aspeed.c

268

pr_warn("No function %s found on pin %s (%d). Found signal(s) %s for function(s) %s\n",

drivers/pinctrl/aspeed/pinctrl-aspeed.c

411

pr_warn("No GPIO signal type found on pin %s (%d). Found: %s\n",

drivers/pinctrl/core.c

1983

pr_warn("failed to determine debugfs dir name for %s\n",

drivers/pinctrl/core.c

1995

pr_warn("failed to create debugfs directory for %s\n",

drivers/pinctrl/core.c

2020

pr_warn("failed to create debugfs directory\n");

drivers/pinctrl/pinctrl-at91.c

1629

pr_warn("AT91: No type for GPIO irq offset %d\n", d->irq);

drivers/pinctrl/pinctrl-st.c

1213

pr_warn("Invalid st,pins in %pOFn node\n", np);

drivers/pinctrl/pinctrl-st.c

474

pr_warn("Attempt to set delay %d, closest available %d\n",

drivers/pinctrl/pinctrl-st.c

497

pr_warn("Delay not found in/out delay list\n");

drivers/pinctrl/renesas/core.c

1285

pr_warn("sh_pfc: Checking builtin pinmux tables\n");

drivers/pinctrl/renesas/core.c

1295

pr_warn("sh_pfc: Detected %u errors and %u warnings\n", sh_pfc_errors,

drivers/pinctrl/renesas/core.c

783

pr_warn("%s: " fmt, drvname, ##__VA_ARGS__); \

drivers/platform/chrome/cros_ec_lpc.c

490

pr_warn(DRV_NAME ": Looking for %s failed\n", id);

drivers/platform/loongarch/loongson-laptop.c

204

pr_warn("Loongson_backlight: resume brightness failed") :

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

342

pr_warn("short read as not enough receive buffer space\n");

drivers/platform/raspberrypi/vchiq-mmal/mmal-vchiq.c

483

pr_warn("error %d in reply\n", msg->h.status);

drivers/platform/x86/acer-wmi.c

1306

pr_warn("Unknown buffer length %d\n", obj->buffer.length);

drivers/platform/x86/acer-wmi.c

1315

pr_warn("Get 0x%x Device Status failed: 0x%x - 0x%x\n",

drivers/platform/x86/acer-wmi.c

1385

pr_warn("Unknown buffer length %d\n", obj->buffer.length);

drivers/platform/x86/acer-wmi.c

1394

pr_warn("Get Current Device Status failed: 0x%x - 0x%x\n",

drivers/platform/x86/acer-wmi.c

1416

pr_warn("Unknown buffer length %d\n", obj->buffer.length);

drivers/platform/x86/acer-wmi.c

1425

pr_warn("Set Device Status failed: 0x%x - 0x%x\n",

drivers/platform/x86/acer-wmi.c

2257

pr_warn("Unknown kbd_dock_state 0x%02x\n", kbd_dock_state);

drivers/platform/x86/acer-wmi.c

2481

pr_warn("Unknown response received %d\n", obj->type);

drivers/platform/x86/acer-wmi.c

2485

pr_warn("Unknown buffer length %d\n", obj->buffer.length);

drivers/platform/x86/acer-wmi.c

2499

pr_warn("Unknown key number - 0x%x\n",

drivers/platform/x86/acer-wmi.c

2540

pr_warn("Unknown function number - %d - %d\n",

drivers/platform/x86/acer-wmi.c

2569

pr_warn("Unknown buffer length %d\n", obj->buffer.length);

drivers/platform/x86/acer-wmi.c

2595

pr_warn("Enabling EC raw mode failed: 0x%x - 0x%x\n",

drivers/platform/x86/acer-wmi.c

2619

pr_warn("Enabling Launch Manager failed: 0x%x - 0x%x\n",

drivers/platform/x86/acer-wmi.c

2641

pr_warn("Enabling RF Button failed: 0x%x - 0x%x\n",

drivers/platform/x86/acer-wmi.c

3220

pr_warn("Cannot enable RF Button Driver\n");

drivers/platform/x86/acer-wmi.c

3241

pr_warn("Cannot enable accelerometer\n");

drivers/platform/x86/apple-gmux.c

530

pr_warn("Timeout waiting for gmux switch to complete\n");

drivers/platform/x86/apple-gmux.c

930

pr_warn("No GPE found for gmux\n");

drivers/platform/x86/asus-armoury.c

379

pr_warn("Unrecognized mini-LED mode: %u", mode);

drivers/platform/x86/asus-armoury.c

413

pr_warn("mini-LED mode unrecognized device: %u\n", mode);

drivers/platform/x86/asus-armoury.c

452

pr_warn("Cannot switch MUX to dGPU mode when dGPU is disabled: %02X\n",

drivers/platform/x86/asus-armoury.c

463

pr_warn("Cannot switch MUX to dGPU mode when eGPU is enabled\n");

drivers/platform/x86/asus-armoury.c

496

pr_warn("Cannot disable dGPU when the MUX is in dGPU mode\n");

drivers/platform/x86/asus-armoury.c

563

pr_warn("Failed to get eGPU connection status: %d\n", err);

drivers/platform/x86/asus-armoury.c

567

pr_warn("Cannot activate eGPU while undetected\n");

drivers/platform/x86/asus-armoury.c

578

pr_warn("Cannot enable eGPU when the MUX is in dGPU mode\n");

drivers/platform/x86/asus-armoury.c

603

pr_warn("Failed to ensure eGPU is deactivated: %d\n", err);

drivers/platform/x86/asus-armoury.c

698

pr_warn("Unrecognised value for APU mem 0x%08x\n", mem);

drivers/platform/x86/asus-armoury.c

718

pr_warn("Failed to set apu_mem 0x%x: %d\n", mem, err);

drivers/platform/x86/asus-armoury.c

994

pr_warn("No matching power limits found for this system\n");

drivers/platform/x86/asus-laptop.c

1016

pr_warn("Error setting bluetooth status to %d\n", status);

drivers/platform/x86/asus-laptop.c

1046

pr_warn("Error setting wimax status to %d\n", status);

drivers/platform/x86/asus-laptop.c

1075

pr_warn("Error setting wwan status to %d\n", status);

drivers/platform/x86/asus-laptop.c

1105

pr_warn("Error setting display\n");

drivers/platform/x86/asus-laptop.c

1146

pr_warn("Error setting light sensor switch\n");

drivers/platform/x86/asus-laptop.c

1178

pr_warn("Error setting light sensor level\n");

drivers/platform/x86/asus-laptop.c

1249

pr_warn("Error reading GPS status\n");

drivers/platform/x86/asus-laptop.c

1498

pr_warn("Unable to register input device\n");

drivers/platform/x86/asus-laptop.c

1695

pr_warn("Couldn't get the DSDT table header\n");

drivers/platform/x86/asus-laptop.c

1707

pr_warn("Error calling BSTS\n");

drivers/platform/x86/asus-laptop.c

407

pr_warn("Error finding %s\n", method);

drivers/platform/x86/asus-laptop.c

597

pr_warn("Error reading kled level\n");

drivers/platform/x86/asus-laptop.c

611

pr_warn("Keyboard LED display write failed\n");

drivers/platform/x86/asus-laptop.c

759

pr_warn("Error reading brightness\n");

drivers/platform/x86/asus-laptop.c

771

pr_warn("Error changing brightness\n");

drivers/platform/x86/asus-laptop.c

952

pr_warn("LED display write failed\n");

drivers/platform/x86/asus-laptop.c

975

pr_warn("Error reading Wireless status\n");

drivers/platform/x86/asus-laptop.c

987

pr_warn("Error setting wlan status to %d\n", status);

drivers/platform/x86/asus-wmi.c

1138

pr_warn("Failed to set ppt_pl2_sppt: %d\n", err);

drivers/platform/x86/asus-wmi.c

1143

pr_warn("Failed to set ppt_pl2_sppt (result): 0x%x\n", result);

drivers/platform/x86/asus-wmi.c

1183

pr_warn("Failed to set ppt_pl1_spl: %d\n", err);

drivers/platform/x86/asus-wmi.c

1188

pr_warn("Failed to set ppt_pl1_spl (result): 0x%x\n", result);

drivers/platform/x86/asus-wmi.c

1227

pr_warn("Failed to set ppt_fppt: %d\n", err);

drivers/platform/x86/asus-wmi.c

1232

pr_warn("Failed to set ppt_fppt (result): 0x%x\n", result);

drivers/platform/x86/asus-wmi.c

1272

pr_warn("Failed to set ppt_apu_sppt: %d\n", err);

drivers/platform/x86/asus-wmi.c

1277

pr_warn("Failed to set ppt_apu_sppt (result): 0x%x\n", result);

drivers/platform/x86/asus-wmi.c

1317

pr_warn("Failed to set ppt_platform_sppt: %d\n", err);

drivers/platform/x86/asus-wmi.c

1322

pr_warn("Failed to set ppt_platform_sppt (result): 0x%x\n", result);

drivers/platform/x86/asus-wmi.c

1362

pr_warn("Failed to set nv_dynamic_boost: %d\n", err);

drivers/platform/x86/asus-wmi.c

1367

pr_warn("Failed to set nv_dynamic_boost (result): 0x%x\n", result);

drivers/platform/x86/asus-wmi.c

1407

pr_warn("Failed to set nv_temp_target: %d\n", err);

drivers/platform/x86/asus-wmi.c

1412

pr_warn("Failed to set nv_temp_target (result): 0x%x\n", result);

drivers/platform/x86/asus-wmi.c

1461

pr_warn("Failed to set MCU powersave: %d\n", err);

drivers/platform/x86/asus-wmi.c

1465

pr_warn("Failed to set MCU powersave (result): 0x%x\n", result);

drivers/platform/x86/asus-wmi.c

1508

pr_warn("Failed to set MCU powersave: %d\n", err);

drivers/platform/x86/asus-wmi.c

1513

pr_warn("Failed to set MCU powersave (result): 0x%x\n", result);

drivers/platform/x86/asus-wmi.c

1708

pr_warn("Failed to register keyboard backlight LED: %d\n", ret);

drivers/platform/x86/asus-wmi.c

2174

pr_warn("Unable to find PCI bus 1?\n");

drivers/platform/x86/asus-wmi.c

2185

pr_warn("BIOS says wireless lan is %s, but the pci device is %s\n",

drivers/platform/x86/asus-wmi.c

2188

pr_warn("skipped wireless hotplug as probably inappropriate for this model\n");

drivers/platform/x86/asus-wmi.c

2247

pr_warn("Failed to register notify on %s\n", node);

drivers/platform/x86/asus-wmi.c

2592

pr_warn("Failed to set panel overdrive: %d\n", err);

drivers/platform/x86/asus-wmi.c

2597

pr_warn("Failed to set panel overdrive (result): 0x%x\n", result);

drivers/platform/x86/asus-wmi.c

2643

pr_warn("Failed to set boot sound: %d\n", err);

drivers/platform/x86/asus-wmi.c

2648

pr_warn("Failed to set panel boot sound (result): 0x%x\n", result);

drivers/platform/x86/asus-wmi.c

2736

pr_warn("Failed to set mini-LED: %d\n", err);

drivers/platform/x86/asus-wmi.c

2741

pr_warn("Failed to set mini-LED mode (result): 0x%x\n", result);

drivers/platform/x86/asus-wmi.c

2988

pr_warn("Setting fan speed failed: %d\n", state);

drivers/platform/x86/asus-wmi.c

3020

pr_warn("reading fan speed failed: %d\n", ret);

drivers/platform/x86/asus-wmi.c

3429

pr_warn("Failed to set fan boost mode: %d\n", err);

drivers/platform/x86/asus-wmi.c

3434

pr_warn("Failed to set fan boost mode (retval): 0x%x\n",

drivers/platform/x86/asus-wmi.c

3482

pr_warn("Trying to store invalid value\n");

drivers/platform/x86/asus-wmi.c

3539

pr_warn("%s (0x%08x) failed: %d\n", __func__, fan_dev, err);

drivers/platform/x86/asus-wmi.c

4033

pr_warn("Failed to set throttle thermal policy: %d\n", err);

drivers/platform/x86/asus-wmi.c

4189

pr_warn("Failed to set default thermal profile\n");

drivers/platform/x86/asus-wmi.c

4610

pr_warn("Failed to get notify code: %d\n", code);

drivers/platform/x86/asus-wmi.c

5161

pr_warn("Unable to install key filter - %d\n", err);

drivers/platform/x86/asus-wmi.c

5325

pr_warn("failed to register LPS0 sleep handler in asus-wmi\n");

drivers/platform/x86/asus-wmi.c

5353

pr_warn("ASUS Management GUID not found\n");

drivers/platform/x86/asus-wmi.c

5358

pr_warn("ASUS Event GUID not found\n");

drivers/platform/x86/asus-wmi.c

809

pr_warn("Can not disable dGPU when the MUX is in dGPU mode: %d\n", err);

drivers/platform/x86/asus-wmi.c

816

pr_warn("Failed to set dgpu disable: %d\n", err);

drivers/platform/x86/asus-wmi.c

821

pr_warn("Failed to set dgpu disable (result): 0x%x\n", result);

drivers/platform/x86/asus-wmi.c

868

pr_warn("Failed to get egpu connection status: %d\n", err);

drivers/platform/x86/asus-wmi.c

876

pr_warn("Failed to get gpu mux status: %d\n", result);

drivers/platform/x86/asus-wmi.c

881

pr_warn("Can not enable eGPU when the MUX is in dGPU mode: %d\n", err);

drivers/platform/x86/asus-wmi.c

888

pr_warn("Failed to set egpu state: %d\n", err);

drivers/platform/x86/asus-wmi.c

893

pr_warn("Failed to set egpu state (retval): 0x%x\n", result);

drivers/platform/x86/asus-wmi.c

963

pr_warn("Can not switch MUX to dGPU mode when dGPU is disabled: %d\n", err);

drivers/platform/x86/asus-wmi.c

975

pr_warn("Can not switch MUX to dGPU mode when eGPU is enabled: %d\n", err);

drivers/platform/x86/dell/alienware-wmi-wmax.c

1675

pr_warn("force_gmode requires platform profile support\n");

drivers/platform/x86/dell/dell-laptop.c

2020

pr_warn("Keyboard brightness level control not supported\n");

drivers/platform/x86/dell/dell-laptop.c

2052

pr_warn("Keyboard brightness level control not supported\n");

drivers/platform/x86/dell/dell-laptop.c

2477

pr_warn("Unable to setup rfkill\n");

drivers/platform/x86/dell/dell-laptop.c

884

pr_warn("Unable to register dell rbtn notifier\n");

drivers/platform/x86/dell/dell-laptop.c

889

pr_warn("Unable to install key filter\n");

drivers/platform/x86/dell/dell-lis3lv02d.c

224

pr_warn("accelerometer is present on SMBus but its address is unknown, skipping registration\n");

drivers/platform/x86/dell/dell-wmi-aio.c

158

pr_warn("No known WMI GUID found\n");

drivers/platform/x86/dell/dell-wmi-base.c

397

pr_warn("could not allocate device for %s\n", devname);

drivers/platform/x86/dell/dell-wmi-base.c

407

pr_warn("could not register device for %s\n", devname);

drivers/platform/x86/dell/dell-wmi-base.c

475

pr_warn("bad response type %x\n", obj->type);

drivers/platform/x86/dell/dell-wmi-base.c

511

pr_warn("Invalid length of WMI event\n");

drivers/platform/x86/dell/dell-wmi-base.c

657

pr_warn("no DMI; using the old-style hotkey interface\n");

drivers/platform/x86/dell/dell_rbu.c

117

pr_warn("failed to allocate new packet\n");

drivers/platform/x86/dell/dell_rbu.c

141

pr_warn("failed to allocate invalid_addr_packet_array\n");

drivers/platform/x86/dell/dell_rbu.c

151

pr_warn("failed to allocate new packet\n");

drivers/platform/x86/dell/dell_rbu.c

219

pr_warn("packetsize not specified\n");

drivers/platform/x86/dell/dell_rbu.c

442

pr_warn("data underrun\n");

drivers/platform/x86/dell/dell_rbu.c

590

pr_warn("image_type is invalid\n");

drivers/platform/x86/eeepc-laptop.c

217

pr_warn("Error writing %s\n", method);

drivers/platform/x86/eeepc-laptop.c

232

pr_warn("Error reading %s\n", method);

drivers/platform/x86/eeepc-laptop.c

250

pr_warn("Error finding %s\n", method);

drivers/platform/x86/eeepc-laptop.c

414

pr_warn("cpufv enabled (not officially supported on this model)\n");

drivers/platform/x86/eeepc-laptop.c

579

pr_warn("Unable to find port\n");

drivers/platform/x86/eeepc-laptop.c

586

pr_warn("Unable to find PCI bus 1?\n");

drivers/platform/x86/eeepc-laptop.c

598

pr_warn("BIOS says wireless lan is %s, but the pci device is %s\n",

drivers/platform/x86/eeepc-laptop.c

601

pr_warn("skipped wireless hotplug as probably inappropriate for this model\n");

drivers/platform/x86/eeepc-laptop.c

669

pr_warn("Failed to register notify on %s\n", node);

drivers/platform/x86/eeepc-wmi.c

174

pr_warn("Found legacy ATKD device (%s)\n", EEEPC_ACPI_HID);

drivers/platform/x86/eeepc-wmi.c

175

pr_warn("WMI device present, but legacy ATKD device is also "

drivers/platform/x86/eeepc-wmi.c

177

pr_warn("You probably booted with acpi_osi=\"Linux\" or "

drivers/platform/x86/eeepc-wmi.c

179

pr_warn("Can't load eeepc-wmi, use default acpi_osi "

drivers/platform/x86/fujitsu-laptop.c

983

pr_warn("Unable to register battery charge control: %d\n", ret);

drivers/platform/x86/hdaps.c

536

pr_warn("supported laptop not found!\n");

drivers/platform/x86/hdaps.c

603

pr_warn("driver init failed (ret=%d)!\n", ret);

drivers/platform/x86/hp/hp-bioscfg/biosattr-interface.c

160

pr_warn("query 0x%x returned wrong type or too small buffer\n", query);

drivers/platform/x86/hp/hp-bioscfg/biosattr-interface.c

169

pr_warn("query 0x%x returned error 0x%x\n", query, ret);

drivers/platform/x86/hp/hp-bioscfg/bioscfg.c

170

pr_warn("Prerequisites size value exceeded the maximum number of elements supported or data may be malformed\n");

drivers/platform/x86/hp/hp-bioscfg/enum-attributes.c

160

pr_warn("Unsupported object type [%d]\n", enum_obj[elem].type);

drivers/platform/x86/hp/hp-bioscfg/enum-attributes.c

194

pr_warn("Prerequisites size value exceeded the maximum number of elements supported or data may be malformed\n");

drivers/platform/x86/hp/hp-bioscfg/enum-attributes.c

241

pr_warn("Possible number values size value exceeded the maximum number of elements supported or data may be malformed\n");

drivers/platform/x86/hp/hp-bioscfg/enum-attributes.c

285

pr_warn("Invalid element: %d found in Enumeration attribute or data may be malformed\n", elem);

drivers/platform/x86/hp/hp-bioscfg/enum-attributes.c

376

pr_warn("Enum Possible size value exceeded the maximum number of elements supported or data may be malformed\n");

drivers/platform/x86/hp/hp-bioscfg/int-attributes.c

175

pr_warn("Unsupported object type [%d]\n", integer_obj[elem].type);

drivers/platform/x86/hp/hp-bioscfg/int-attributes.c

211

pr_warn("Prerequisites size value exceeded the maximum number of elements supported or data may be malformed\n");

drivers/platform/x86/hp/hp-bioscfg/int-attributes.c

261

pr_warn("Invalid element: %d found in Integer attribute or data may be malformed\n", elem);

drivers/platform/x86/hp/hp-bioscfg/int-attributes.c

333

pr_warn("Unable to convert string to integer: %s\n", dst);

drivers/platform/x86/hp/hp-bioscfg/int-attributes.c

62

pr_warn("Invalid integer value found: %s\n", attr_value);

drivers/platform/x86/hp/hp-bioscfg/order-list-attributes.c

164

pr_warn("Unsupported object type [%d]\n", order_obj[elem].type);

drivers/platform/x86/hp/hp-bioscfg/order-list-attributes.c

199

pr_warn("Prerequisites size value exceeded the maximum number of elements supported or data may be malformed\n");

drivers/platform/x86/hp/hp-bioscfg/order-list-attributes.c

243

pr_warn("Order List size value exceeded the maximum number of elements supported or data may be malformed\n");

drivers/platform/x86/hp/hp-bioscfg/order-list-attributes.c

281

pr_warn("Invalid element: %d found in Ordered_List attribute or data may be malformed\n", elem);

drivers/platform/x86/hp/hp-bioscfg/order-list-attributes.c

365

pr_warn("Ordered List size value exceeded the maximum number of elements supported or data may be malformed\n");

drivers/platform/x86/hp/hp-bioscfg/passwdobj-attributes.c

254

pr_warn("Unsupported object type [%d]\n", password_obj[elem].type);

drivers/platform/x86/hp/hp-bioscfg/passwdobj-attributes.c

287

pr_warn("Prerequisites size value exceeded the maximum number of elements supported or data may be malformed\n");

drivers/platform/x86/hp/hp-bioscfg/passwdobj-attributes.c

337

pr_warn("Password Encoding size value exceeded the maximum number of elements supported or data may be malformed\n");

drivers/platform/x86/hp/hp-bioscfg/passwdobj-attributes.c

370

pr_warn("Invalid element: %d found in Password attribute or data may be malformed\n", elem);

drivers/platform/x86/hp/hp-bioscfg/passwdobj-attributes.c

468

pr_warn("Password Encoding size value exceeded the maximum number of elements supported or data may be malformed\n");

drivers/platform/x86/hp/hp-bioscfg/string-attributes.c

166

pr_warn("Unsupported object type [%d]\n", string_obj[elem].type);

drivers/platform/x86/hp/hp-bioscfg/string-attributes.c

200

pr_warn("Prerequisites size value exceeded the maximum number of elements supported or data may be malformed\n");

drivers/platform/x86/hp/hp-bioscfg/string-attributes.c

248

pr_warn("Invalid element: %d found in String attribute or data may be malformed\n", elem);

drivers/platform/x86/hp/hp-wmi.c

1218

pr_warn("Unknown camera shutter state - 0x%x\n", event_data);

drivers/platform/x86/hp/hp-wmi.c

1387

pr_warn("unable to parse 0x1b query output\n");

drivers/platform/x86/hp/hp-wmi.c

1414

pr_warn("unknown device type 0x%x\n",

drivers/platform/x86/hp/hp-wmi.c

1420

pr_warn("zero device %d while %d reported\n",

drivers/platform/x86/hp/hp-wmi.c

1784

pr_warn("GPU modes not updated, unable to get slowdown temp\n");

drivers/platform/x86/hp/hp-wmi.c

2013

pr_warn("Failed to read current platform profile (%d)\n", err);

drivers/platform/x86/hp/hp-wmi.c

2034

pr_warn("Failed to restore platform profile (%d)\n", err);

drivers/platform/x86/hp/hp-wmi.c

2061

pr_warn("Failed to read current platform profile (%d)\n", err);

drivers/platform/x86/hp/hp-wmi.c

2078

pr_warn("Failed to actualize power limits: %d\n", err);

drivers/platform/x86/hp/hp-wmi.c

2094

pr_warn("Failed to install ACPI power source notify handler\n");

drivers/platform/x86/hp/hp-wmi.c

2108

pr_warn("Failed to install ACPI power source notify handler\n");

drivers/platform/x86/hp/hp-wmi.c

2623

pr_warn("Unknown EC layout for board %s. Thermal profile readback will be disabled. Please report this to platform-driver-x86@vger.kernel.org\n",

drivers/platform/x86/hp/hp-wmi.c

575

pr_warn("query 0x%x returned an invalid object 0x%x\n", query, ret);

drivers/platform/x86/hp/hp-wmi.c

586

pr_warn("query 0x%x returned error 0x%x\n", query, ret);

drivers/platform/x86/hp/hp-wmi.c

941

pr_warn("power configuration of the wireless devices unexpectedly changed\n");

drivers/platform/x86/ibm_rtl.c

242

pr_warn("module loaded by force\n");

drivers/platform/x86/intel/oaktrail.c

245

pr_warn("Unable to register backlight device\n");

drivers/platform/x86/intel/oaktrail.c

309

pr_warn("Unable to register platform driver\n");

drivers/platform/x86/intel/oaktrail.c

315

pr_warn("Unable to allocate platform device\n");

drivers/platform/x86/intel/oaktrail.c

322

pr_warn("Unable to add platform device\n");

drivers/platform/x86/intel/oaktrail.c

334

pr_warn("Setup rfkill failed\n");

drivers/platform/x86/intel/pmc/core.c

626

pr_warn("Invalid LTR scale factor.\n");

drivers/platform/x86/lenovo/think-lmi.c

350

pr_warn("Unknown pwdcfg buffer length %d\n", obj->buffer.length);

drivers/platform/x86/lenovo/thinkpad_acpi.c

1043

pr_warn("WARNING: sysfs attribute %s is deprecated and will be removed. %s\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

10493

pr_warn("Attempting to toggle AMT on a system that doesn't advertise support\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

1683

pr_warn("WARNING: Outdated ThinkPad BIOS/EC firmware\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

1684

pr_warn("WARNING: This firmware may be missing critical bug fixes and/or important features\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

2039

pr_warn("Multi mode status is undetected, assuming laptop\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

6060

pr_warn("Thinkpad ACPI EC unable to access EC version\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

6816

pr_warn("Cannot enable backlight brightness support, ACPI is already handling it. Refer to the acpi_backlight kernel parameter.\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

7269

pr_warn("Unexpected SAUM result %d\n",

drivers/platform/x86/lenovo/thinkpad_acpi.c

7284

pr_warn("Failed to unmute the HW mute switch\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

7295

pr_warn("Failed to restore mute mode\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

7407

pr_warn("Failed to restore software mute\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

8266

pr_warn("Couldn't set 2nd fan level, disabling support\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

8292

pr_warn("Couldn't set 2nd fan level, disabling support\n");

drivers/platform/x86/lenovo/thinkpad_acpi.c

9352

pr_warn("Thinkpad ACPI has no %s interface.\n", t->name);

drivers/platform/x86/lenovo/thinkpad_acpi.c

9749

pr_warn("unknown battery %s, assuming primary", battery_name);

drivers/platform/x86/lenovo/wmi-hotkey-utilities.c

141

pr_warn("The MIC_MUTE LED of this device isn't supported.\n");

drivers/platform/x86/lenovo/wmi-hotkey-utilities.c

151

pr_warn("The AUDIO_MUTE LED of this device isn't supported.\n");

drivers/platform/x86/msi-ec.c

1330

pr_warn("Unable to find a valid firmware version!\n");

drivers/platform/x86/msi-ec.c

1335

pr_warn("Firmware version is not supported: '%s'\n", fw_version);

drivers/platform/x86/msi-wmi-platform.c

477

pr_warn("Ignoring DMI whitelist\n");

drivers/platform/x86/portwell-ec.c

430

pr_warn("force load portwell-ec without DMI check, using full display config\n");

drivers/platform/x86/samsung-laptop.c

1534

pr_warn("Linux mode was not set!\n");

drivers/platform/x86/samsung-laptop.c

434

pr_warn("SABI command 0x%04x failed with"

drivers/platform/x86/siemens/simatic-ipc.c

166

pr_warn("unsupported IPC detected, station id=%08x\n",

drivers/platform/x86/siemens/simatic-ipc.c

210

pr_warn("DMI entry %d not found\n", SIMATIC_IPC_DMI_ENTRY_OEM);

drivers/platform/x86/sony-laptop.c

1278

pr_warn("method: name: %4.4s, args %X\n",

drivers/platform/x86/sony-laptop.c

1865

pr_warn("handle 0x%.4x: keyboard backlight setup already done for 0x%.4x\n",

drivers/platform/x86/sony-laptop.c

2231

pr_warn("couldn't to read the thermal profiles\n");

drivers/platform/x86/sony-laptop.c

2237

pr_warn("couldn't to read the current thermal profile");

drivers/platform/x86/sony-laptop.c

3140

pr_warn("unable to register backlight device\n");

drivers/platform/x86/sony-laptop.c

3181

pr_warn("unable to walk acpi resources\n");

drivers/platform/x86/sony-laptop.c

4190

pr_warn("Invalid IRQ %d\n",

drivers/platform/x86/sony-laptop.c

4253

pr_warn("Unable to read status\n");

drivers/platform/x86/sony-laptop.c

4269

pr_warn("Failure evaluating %s\n", METHOD_NAME__PRS);

drivers/platform/x86/sony-laptop.c

62

pr_warn(fmt, ##__VA_ARGS__); \

drivers/platform/x86/sony-laptop.c

782

pr_warn("Unexpected acpi_object: 0x%x\n", object->type);

drivers/platform/x86/toshiba_acpi.c

2937

pr_warn("No hotkey query interface found\n");

drivers/platform/x86/toshiba_acpi.c

3457

pr_warn("unable to register hwmon device, skipping\n");

drivers/platform/x86/uniwill/uniwill-acpi.c

2161

pr_warn("Loading on a potentially unsupported device\n");

drivers/platform/x86/uv_sysfs.c

838

pr_warn("sysfs_create_group hubless_base_attr_group failed\n");

drivers/platform/x86/uv_sysfs.c

856

pr_warn("kobject_create_and_add sgi_uv failed\n");

drivers/platform/x86/uv_sysfs.c

865

pr_warn("sysfs_create_group base_attr_group failed\n");

drivers/platform/x86/x86-android-tablets/other.c

715

pr_warn("Could not get PCI SDIO at devfn 0x%02x\n", PCI_DEVFN(0x11, 0));

drivers/pmdomain/core.c

1377

pr_warn("genpd: Not disabling unused power domains\n");

drivers/pmdomain/core.c

2234

pr_warn("%s: unable to remove subdomain %s\n",

drivers/pmdomain/core.c

2450

pr_warn("%s: no governor for states\n", genpd->name);

drivers/pmdomain/renesas/rcar-gen4-sysc.c

320

pr_warn("%pOF: Cannot map regs\n", np);

drivers/pmdomain/renesas/rcar-gen4-sysc.c

366

pr_warn("Failed to add PM subdomain %s to parent %u\n",

drivers/pmdomain/renesas/rcar-sysc.c

375

pr_warn("%pOF: Cannot map regs\n", np);

drivers/pmdomain/renesas/rcar-sysc.c

427

pr_warn("Failed to add PM subdomain %s to parent %u\n",

drivers/pmdomain/renesas/rmobile-sysc.c

167

pr_warn("Too many special PM domains\n");

drivers/pmdomain/renesas/rmobile-sysc.c

308

pr_warn("%pOF cannot map reg 0\n", np);

drivers/pmdomain/renesas/rmobile-sysc.c

315

pr_warn("%pOF lacks pm-domains node\n", np);

drivers/pmdomain/samsung/exynos-pm-domains.c

151

pr_warn("%pOF failed to add subdomain: %pOF\n",

drivers/power/supply/power_supply_core.c

1578

pr_warn("%s: Expected proper parent device for '%s'\n",

drivers/power/supply/power_supply_sysfs.c

511

pr_warn("%s: Property %d skipped because it is missing from power_supply_attrs\n",

drivers/powercap/dtpm.c

510

pr_warn("Failed to create '%s' in the hierarchy\n",

drivers/powercap/intel_rapl_tpmi.c

165

pr_warn(FW_BUG "Unsupported major version:%ld\n",

drivers/powercap/intel_rapl_tpmi.c

176

pr_warn(FW_BUG "Invalid Domain size %d\n", tpmi_domain_size);

drivers/powercap/intel_rapl_tpmi.c

183

pr_warn(FW_BUG "Invalid Domain flag 0x%x\n", tpmi_domain_flags);

drivers/powercap/intel_rapl_tpmi.c

193

pr_warn(FW_BUG "System domain must support Domain Info register\n");

drivers/powercap/intel_rapl_tpmi.c

205

pr_warn(FW_BUG "Unsupported Domain type %d\n", tpmi_domain_type);

drivers/powercap/intel_rapl_tpmi.c

210

pr_warn(FW_BUG "Duplicate Domain type %d\n", tpmi_domain_type);

drivers/ptp/ptp_qoriq.c

531

pr_warn("device tree node missing required elements, try automatic configuration\n");

drivers/pwm/core.c

2030

pr_warn("PWM device already freed\n");

drivers/rapidio/devices/rio_mport_cdev.c

77

pr_warn(DRV_PREFIX "%s WARNING " fmt "\n", __func__, ##arg)

drivers/rapidio/rio_cm.c

63

pr_warn(DRV_NAME ": %s WARNING " fmt "\n", __func__, ##arg)

drivers/ras/amd/atl/access.c

111

pr_warn("Error writing DF Indirect FICAA, FICAA=0x%x\n", ficaa);

drivers/ras/amd/atl/access.c

117

pr_warn("Error reading DF Indirect FICAD LO, FICAA=0x%x.\n", ficaa);

drivers/ras/amd/atl/system.c

303

pr_warn("Failed to determine DF Revision");

drivers/ras/amd/atl/system.c

316

pr_warn("Failed to read DRAM hole base");

drivers/ras/amd/fmpm.c

233

pr_warn("Storage update failed for FRU 0x%016llx\n", rec->fmp.fru_id);

drivers/ras/amd/fmpm.c

236

pr_warn("Not enough space on storage\n");

drivers/ras/amd/fmpm.c

372

pr_warn("Exceeded number of entries for FRU 0x%016llx\n", rec->fmp.fru_id);

drivers/ras/amd/fmpm.c

703

pr_warn("Saved record found with %u entries.\n", saved_nr_entries);

drivers/ras/amd/fmpm.c

704

pr_warn("Please increase max_nr_entries to %u.\n", saved_nr_entries);

drivers/ras/amd/fmpm.c

787

pr_warn("Too many FRUs to manage: found: %u, max: %u\n",

drivers/ras/cec.c

365

pr_warn("CEC: Invalid pfn: 0x%llx\n", pfn);

drivers/ras/cec.c

487

pr_warn("Error getting RAS debugfs root!\n");

drivers/ras/cec.c

493

pr_warn("Error creating cec debugfs node!\n");

drivers/ras/cec.c

500

pr_warn("Error creating decay_interval debugfs node!\n");

drivers/ras/cec.c

507

pr_warn("Error creating action_threshold debugfs node!\n");

drivers/ras/cec.c

516

pr_warn("Error creating pfn debugfs node!\n");

drivers/ras/cec.c

522

pr_warn("Error creating array debugfs node!\n");

drivers/ras/ras.c

86

pr_warn(FW_BUG "section length: %d\n", err->section_length);

drivers/ras/ras.c

87

pr_warn(FW_BUG "section length is too small\n");

drivers/ras/ras.c

88

pr_warn(FW_BUG "firmware-generated error record is incorrect\n");

drivers/regulator/core.c

6847

pr_warn("regulator: Not disabling unused regulators\n");

drivers/regulator/event.c

86

pr_warn("Failed to create genetlink family for reg event\n");

drivers/regulator/internal.h

23

pr_warn("%s: " fmt, rdev_get_name(rdev), ##__VA_ARGS__)

drivers/regulator/max77686-regulator.c

151

pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",

drivers/regulator/max77686-regulator.c

185

pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",

drivers/regulator/of_regulator.c

162

pr_warn("%pOFn: ambiguous configuration for settling time, ignoring 'regulator-settling-time-up-us'\n",

drivers/regulator/of_regulator.c

172

pr_warn("%pOFn: ambiguous configuration for settling time, ignoring 'regulator-settling-time-down-us'\n",

drivers/regulator/of_regulator.c

205

pr_warn("%pOFn: mapping for mode %d not defined\n",

drivers/regulator/of_regulator.c

233

pr_warn("%pOFn: mode mapping not defined\n", np);

drivers/regulator/of_regulator.c

296

pr_warn("%pOFn: mapping for mode %d not defined\n",

drivers/regulator/rohm-regulator.c

58

pr_warn("Unsupported %s voltage %u\n", prop, uv);

drivers/regulator/virtual.c

302

pr_warn("**********************************************************\n");

drivers/regulator/virtual.c

303

pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");

drivers/regulator/virtual.c

304

pr_warn("** **\n");

drivers/regulator/virtual.c

305

pr_warn("** regulator-virtual-consumer is only for testing and **\n");

drivers/regulator/virtual.c

306

pr_warn("** debugging. Do not use it in a production kernel. **\n");

drivers/regulator/virtual.c

307

pr_warn("** **\n");

drivers/regulator/virtual.c

308

pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");

drivers/regulator/virtual.c

309

pr_warn("**********************************************************\n");

drivers/remoteproc/qcom_pil_info.c

102

pr_warn("insufficient PIL info slots\n");

drivers/resctrl/mpam_devices.c

1009

pr_warn("Unexpected monitor type %d\n", m->type);

drivers/resctrl/mpam_devices.c

1051

pr_warn("Unexpected monitor type %d\n", m->type);

drivers/resctrl/mpam_devices.c

2510

pr_warn("Failed to register irqs: %d\n", err);

drivers/resctrl/mpam_devices.c

937

pr_warn("Failed to read a stable value\n");

drivers/resctrl/mpam_devices.c

988

pr_warn("Unexpected monitor type %d\n", m->type);

drivers/reset/reset-socfpga.c

51

pr_warn("missing altr,modrst-offset property, assuming 0x10\n");

drivers/rtc/rtc-max8997.c

106

pr_warn("RTC cannot handle the year %d. Assume it's 2000.\n",

drivers/rtc/rtc-mc146818-lib.c

81

pr_warn("Reading current time from RTC took around %li ms\n",

drivers/rtc/rtc-msm6242.c

105

pr_warn("timed out waiting for RTC (0x%x)\n",

drivers/rtc/rtc-sun4v.c

33

pr_warn("tod_get() timed out.\n");

drivers/rtc/rtc-sun4v.c

36

pr_warn("tod_get() not supported.\n");

drivers/rtc/rtc-sun4v.c

60

pr_warn("tod_set() timed out.\n");

drivers/rtc/rtc-sun4v.c

63

pr_warn("tod_set() not supported.\n");

drivers/s390/block/dasd_devmap.c

205

pr_warn("%.*s is not a supported device option\n",

drivers/s390/block/dasd_devmap.c

296

pr_warn("A closing parenthesis ')' is missing in the dasd= parameter\n");

drivers/s390/block/dasd_diag.c

152

pr_warn("%s: The access mode of a DIAG device changed to read-only\n",

drivers/s390/block/dasd_diag.c

157

pr_warn("%s: DIAG ERP failed with rc=%d\n",

drivers/s390/block/dasd_diag.c

374

pr_warn("%s: Device type %d is not supported in DIAG mode\n",

drivers/s390/block/dasd_diag.c

424

pr_warn("%s: A 64-bit DIAG call failed\n",

drivers/s390/block/dasd_diag.c

434

pr_warn("%s: Accessing the DASD failed because of an incorrect format (rc=%d)\n",

drivers/s390/block/dasd_diag.c

453

pr_warn("%s: DIAG initialization failed with rc=%d\n",

drivers/s390/block/dasd_eckd.c

6468

pr_warn("Service on the storage server caused path %x.%02x to go offline",

drivers/s390/block/dasd_genhd.c

223

pr_warn("Registering the device driver with major number %d failed\n",

drivers/s390/block/dasd_ioctl.c

202

pr_warn("%s: The DASD cannot be formatted while it is enabled\n",

drivers/s390/block/dasd_ioctl.c

273

pr_warn("%s: The specified DASD is a partition and cannot be formatted\n",

drivers/s390/block/dasd_ioctl.c

300

pr_warn("%s: The specified DASD is a partition and cannot be checked\n",

drivers/s390/block/dasd_ioctl.c

358

pr_warn("%s: The specified DASD is a partition and tracks cannot be released\n",

drivers/s390/block/dasd_ioctl.c

399

pr_warn("%s: Invalid swap data specified\n",

drivers/s390/block/dasd_ioctl.c

405

pr_warn("%s: The specified DASD is a partition and cannot be swapped\n",

drivers/s390/block/dasd_ioctl.c

411

pr_warn("%s: The specified DASD has no copy pair set up\n",

drivers/s390/block/dasd_proc.c

308

pr_warn("%s is not a supported value for /proc/dasd/statistics\n", str);

drivers/s390/block/dasd_proc.c

313

pr_warn("/proc/dasd/statistics: is not activated in this kernel\n");

drivers/s390/block/dcssblk.c

469

pr_warn("DCSS %s is of type SN or EN"

drivers/s390/block/dcssblk.c

799

pr_warn("Device %s cannot be removed because it is not a known device\n",

drivers/s390/block/dcssblk.c

806

pr_warn("Device %s cannot be removed while it is in use\n",

drivers/s390/block/dcssblk.c

869

pr_warn("DCSS %s is of type SN or EN and cannot"

drivers/s390/block/dcssblk.c

906

pr_warn("Writing to %s failed because it is a read-only device\n",

drivers/s390/char/monreader.c

257

pr_warn("The read queue for monitor data is full\n");

drivers/s390/char/monreader.c

341

pr_warn("Disconnecting the z/VM *MONITOR system service failed with rc=%i\n",

drivers/s390/char/sclp_ap.c

42

pr_warn("configure AP adapter %u failed: cmd=0x%08x response=0x%04x\n",

drivers/s390/char/sclp_cmd.c

115

pr_warn("readcpuinfo failed (response=0x%04x)\n",

drivers/s390/char/sclp_cmd.c

149

pr_warn("configure cpu failed (cmd=0x%08x, response=0x%04x)\n",

drivers/s390/char/sclp_cmd.c

190

pr_warn("configure channel-path failed (cmd=0x%08x, response=0x%04x)\n",

drivers/s390/char/sclp_cmd.c

247

pr_warn("read channel-path info failed (response=0x%04x)\n",

drivers/s390/char/sclp_cmd.c

87

pr_warn("sync request failed (cmd=0x%08x, status=0x%02x)\n",

drivers/s390/char/sclp_config.c

110

pr_warn("SCLP receiver did not register to receive "

drivers/s390/char/sclp_cpi_sys.c

157

pr_warn("request failed (status=0x%02x)\n", req->status);

drivers/s390/char/sclp_cpi_sys.c

164

pr_warn("request failed with response code 0x%x\n", response);

drivers/s390/char/sclp_mem.c

100

pr_warn("assign storage failed (cmd=0x%08x, response=0x%04x, rn=0x%04x)\n",

drivers/s390/char/sclp_pci.c

163

pr_warn("request failed (status=0x%02x)\n",

drivers/s390/char/sclp_pci.c

170

pr_warn("request failed with response code 0x%x\n",

drivers/s390/char/sclp_pci.c

62

pr_warn("configure PCI I/O adapter failed: cmd=0x%08x response=0x%04x\n",

drivers/s390/char/sclp_sd.c

266

pr_warn("Store Data request failed (eq=%d, di=%d, "

drivers/s390/char/sclp_sd.c

332

pr_warn("Could not stop Store Data request - leaking at least %zu bytes\n",

drivers/s390/char/tape_core.c

653

pr_warn("%s: A tape unit was detached while in use\n",

drivers/s390/char/vmlogrdr.c

346

pr_warn("vmlogrdr: failed to start recording automatically\n");

drivers/s390/char/vmlogrdr.c

398

pr_warn("vmlogrdr: failed to stop recording automatically\n");

drivers/s390/cio/blacklist.c

143

pr_warn("%s is not a valid device for the cio_ignore kernel parameter\n",

drivers/s390/cio/blacklist.c

55

pr_warn("0.%x.%04x to 0.%x.%04x is not a valid range for cio_ignore\n",

drivers/s390/cio/ccwreq.c

337

pr_warn("%s: No interrupt was received within %lus (CS=%02x, DS=%02x, CHPID=%x.%02x)\n",

drivers/s390/cio/chsc.c

447

pr_warn("Link degraded: RS=%02x RSID=%04x IC=%02x "

drivers/s390/cio/cio.c

656

pr_warn("No CCW console was found\n");

drivers/s390/cio/cio_inject.c

106

pr_warn("crw_inject: Invalid format (need <solicited> <overflow> <chaining> <rsc> <ancillary> <erc> <rsid>)\n");

drivers/s390/cio/cio_inject.c

93

pr_warn("CIO inject is not enabled - ignoring CRW inject\n");

drivers/s390/cio/device.c

317

pr_warn("%s: The device entered boxed state while being set offline\n",

drivers/s390/cio/device.c

320

pr_warn("%s: The device stopped operating while being set offline\n",

drivers/s390/cio/device.c

385

pr_warn("%s: Setting the device online failed because it is boxed\n",

drivers/s390/cio/device.c

388

pr_warn("%s: Setting the device online failed because it is not operational\n",

drivers/s390/cio/device.c

573

pr_warn("Logging for subchannel 0.%x.%04x failed with errno=%d\n",

drivers/s390/crypto/ap_bus.c

2583

pr_warn("The hardware system does not support AP instructions\n");

drivers/s390/crypto/ap_bus.c

2612

pr_warn("%d is not a valid cryptographic domain\n",

drivers/s390/crypto/vfio_ap_ops.c

499

pr_warn("%s: apqn %04x: response: %02x\n", __func__, q->apqn,

drivers/s390/scsi/zfcp_aux.c

129

pr_warn("DIX is enabled. It is experimental and might cause problems\n");

drivers/scsi/a3000.c

49

pr_warn("Non-serviced A3000 SCSI-interrupt? ISTR = %02x\n", status);

drivers/scsi/aacraid/aachba.c

3418

pr_warn("aac_srb_callback: srb failed, status = %d\n",

drivers/scsi/aacraid/aachba.c

3448

pr_warn("aacraid: SCSI CMD underflow\n");

drivers/scsi/aacraid/aachba.c

3450

pr_warn("aacraid: SCSI CMD Data Overrun\n");

drivers/scsi/aacraid/aachba.c

3549

pr_warn("aac_srb_callback: check condition, status = %d len=%d\n",

drivers/scsi/aacraid/aachba.c

3783

pr_warn("aac_hba_cmd_req: aac_fib_send failed with status: %d\n",

drivers/scsi/aacraid/aachba.c

4101

pr_warn("aacraid: cmd len %08lX cmd underflow %08X\n",

drivers/scsi/aacraid/comminit.c

141

pr_warn("aacraid: Comm Interface type3 enabled\n");

drivers/scsi/aacraid/comminit.c

192

pr_warn("aacraid: Comm Interface enabled\n");

drivers/scsi/aacraid/comminit.c

204

pr_warn("aacraid: Comm Interface type1 enabled\n");

drivers/scsi/aacraid/comminit.c

219

pr_warn("aacraid: Comm Interface type2 enabled\n");

drivers/scsi/aacraid/comminit.c

626

pr_warn("numacb=%d ignored\n", numacb);

drivers/scsi/aacraid/commsup.c

1868

pr_warn(" AIF not cleared by firmware - %d/%d)\n",

drivers/scsi/aacraid/commsup.c

1991

pr_warn("aifd: didn't allocate NewFib\n");

drivers/scsi/arcmsr/arcmsr_hba.c

1023

pr_warn("arcmsr%d: request_irq =%d failed!\n",

drivers/scsi/cxgbi/cxgb3i/cxgb3i.c

1050

pr_warn("t3 0x%p, offload up, ioctl failed.\n", t3dev);

drivers/scsi/cxgbi/cxgb3i/cxgb3i.c

1238

pr_warn("T3 %s, iscsi NOT enabled %u ~ %u!\n",

drivers/scsi/cxgbi/cxgb3i/cxgb3i.c

1316

pr_warn("device 0x%p register failed.\n", t3dev);

drivers/scsi/cxgbi/cxgb4i/cxgb4i.c

2160

pr_warn("%s, iscsi NOT enabled, check config!\n", ndev->name);

drivers/scsi/cxgbi/libcxgbi.c

1048

pr_warn("csk 0x%p,%u,0x%lx,%u, cr %u,%u+%u, < %u.\n",

drivers/scsi/cxgbi/libcxgbi.c

1065

pr_warn("csk 0x%p,%u,0x%lx,%u, snd_una %u/%u.",

drivers/scsi/cxgbi/libcxgbi.c

141

pr_warn("nport %d, OOM.\n", nports);

drivers/scsi/cxgbi/libcxgbi.c

1777

pr_warn("sg %d NULL, len %u/%u.\n",

drivers/scsi/cxgbi/libcxgbi.c

1793

pr_warn("too many pages %u, dlen %u.\n",

drivers/scsi/cxgbi/libcxgbi.c

1859

pr_warn("tpdu max, sgl %u, bad offset %u/%u.\n",

drivers/scsi/cxgbi/libcxgbi.c

494

pr_warn("cdev 0x%p, p#%u %s, next %u?\n",

drivers/scsi/cxgbi/libcxgbi.c

84

pr_warn("cdev 0x%p, portmap OOM %u.\n", cdev, max_conn);

drivers/scsi/device_handler/scsi_dh_alua.c

871

pr_warn("%s: no device found for rtpg\n",

drivers/scsi/libsas/sas_ata.c

133

pr_warn("%s: SAS error 0x%x\n", __func__, stat->stat);

drivers/scsi/libsas/sas_ata.c

477

pr_warn("%s: Task %p leaked.\n", __func__, task);

drivers/scsi/libsas/sas_ata.c

57

pr_warn("%s: Saw error %d. What to do?\n",

drivers/scsi/libsas/sas_discover.c

123

pr_warn("ERROR: Unidentified device type %d\n", dev->dev_type);

drivers/scsi/libsas/sas_discover.c

181

pr_warn("driver on host %s cannot handle device %016llx, error:%d\n",

drivers/scsi/libsas/sas_discover.c

95

pr_warn("Port %016llx is disconnected when discovering\n",

drivers/scsi/libsas/sas_expander.c

1011

pr_warn("unknown device type(0x%x) attached to ex %016llx phy%02d\n",

drivers/scsi/libsas/sas_expander.c

1241

pr_warn("edge ex %016llx phy S:%02d <--> edge ex %016llx phy S:%02d, while there is a fanout ex %016llx\n",

drivers/scsi/libsas/sas_expander.c

1252

pr_warn("edge ex %016llx phy%02d <--> edge ex %016llx phy%02d link forms a third EEDS!\n",

drivers/scsi/libsas/sas_expander.c

1384

pr_warn("overflow of indexes: dev %016llx phy%02d index 0x%x\n",

drivers/scsi/libsas/sas_expander.c

1454

pr_warn("overflow of indexes: dev %016llx phy%02d index 0x%x\n",

drivers/scsi/libsas/sas_expander.c

1564

pr_warn("expander %016llx discovery failed(0x%x)\n",

drivers/scsi/libsas/sas_expander.c

901

pr_warn("ex %016llx:%02d:D <--> ex %016llx:0x%x is not allowed\n",

drivers/scsi/libsas/sas_internal.h

145

pr_warn("%s: for %s device %016llx returned %d\n",

drivers/scsi/libsas/sas_scsi_host.c

1036

pr_warn("TMF task timeout for %016llx and done\n",

drivers/scsi/libsas/sas_scsi_host.c

1057

pr_warn("TMF task to dev %016llx resp: 0x%x sts 0x%x underrun\n",

drivers/scsi/libsas/sas_scsi_host.c

1067

pr_warn("TMF task blocked task error %016llx\n",

drivers/scsi/libsas/sas_scsi_host.c

1075

pr_warn("TMF task open reject failed %016llx\n",

drivers/scsi/libsas/sas_scsi_host.c

1079

pr_warn("TMF task to dev %016llx resp: 0x%x status 0x%x\n",

drivers/scsi/libsas/sas_scsi_host.c

1089

pr_warn("executing TMF for %016llx failed after %d attempts!\n",

drivers/scsi/libsas/sas_scsi_host.c

420

pr_warn("%s reset of %s failed\n",

drivers/scsi/megaraid/megaraid_sas_base.c

9050

pr_warn("megaraid_sas: provided event log level is out of range, setting it to default 2(CLASS_CRITICAL), permissible range is: -2 to 4\n");

drivers/scsi/mpi3mr/mpi3mr_debug.h

46

pr_warn("%s: " fmt, (ioc)->name, ##__VA_ARGS__)

drivers/scsi/mpi3mr/mpi3mr_os.c

6131

pr_warn(

drivers/scsi/mpt3sas/mpt3sas_base.h

188

pr_warn("%s: " fmt, (ioc)->name, ##__VA_ARGS__)

drivers/scsi/qedf/qedf_dbg.c

46

pr_warn("[%s]:[%s:%d]:%d: %pV", dev_name(&(qedf->pdev->dev)),

drivers/scsi/qedf/qedf_dbg.c

49

pr_warn("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf);

drivers/scsi/qedi/qedi_dbg.c

47

pr_warn("[%s]:[%s:%d]:%d: %pV", dev_name(&qedi->pdev->dev),

drivers/scsi/qedi/qedi_dbg.c

50

pr_warn("[0000:00:00.0]:[%s:%d]: %pV", func, line, &vaf);

drivers/scsi/qla2xxx/qla_dbg.c

2510

pr_warn("%s%pV", pbuf, &vaf);

drivers/scsi/qla2xxx/qla_dbg.c

2553

pr_warn("%s%pV", pbuf, &vaf);

drivers/scsi/qla2xxx/qla_dbg.c

2599

pr_warn("%s%pV", pbuf, &vaf);

drivers/scsi/qla2xxx/qla_dbg.c

2653

pr_warn("%s%pV", pbuf, &vaf);

drivers/scsi/qla2xxx/qla_dbg.c

2744

pr_warn("%s%pV", pbuf, &vaf);

drivers/scsi/qla2xxx/qla_mbx.c

576

pr_warn("%s [%s]-%04x:%ld: **** Failed=%x", QL_MSGHDR,

drivers/scsi/qla2xxx/qla_mbx.c

586

pr_warn(" cmd=%x ****\n", command);

drivers/scsi/scsi_debug.c

1492

pr_warn("unexpected cdb_len=%d, force to 10\n",

drivers/scsi/scsi_debug.c

1608

pr_warn("unexpected unit attention code=%d\n", k);

drivers/scsi/scsi_debug.c

7084

pr_warn("reducing partitions to %d\n", SDEBUG_MAX_PARTS);

drivers/scsi/scsi_debug.c

7956

pr_warn("only LUN address methods 0 and 1 are supported\n");

drivers/scsi/scsi_debug.c

7991

pr_warn("max_luns can be no more than 256\n");

drivers/scsi/scsi_debug.c

8491

pr_warn("ndelay must be less than 1 second, ignored\n");

drivers/scsi/scsi_debug.c

8543

pr_warn("Invalid LUN format %u, using default\n", (int)sdebug_lun_am);

drivers/scsi/scsi_debug.c

8549

pr_warn("max_luns can be no more than 16384, use default\n");

drivers/scsi/scsi_debug.c

8580

pr_warn("fixing max submit queue depth to host max queue depth, %d\n",

drivers/scsi/scsi_debug.c

8665

pr_warn("root_device_register() error\n");

drivers/scsi/scsi_debug.c

8671

pr_warn("bus_register error: %d\n", ret);

drivers/scsi/scsi_debug.c

8676

pr_warn("driver_register error: %d\n", ret);

drivers/scsi/scsi_debug.c

8801

pr_warn("xa_alloc() errno=%d\n", -res);

drivers/scsi/scsi_debug.c

8858

pr_warn("failed, errno=%d\n", -res);

drivers/scsi/scsi_debug.c

8917

pr_warn("failed, errno=%d\n", -error);

drivers/scsi/scsi_debug.c

8985

pr_warn("requested qdepth [%d] exceeds canqueue [%d], trim\n",

drivers/scsi/scsi_debug.c

9573

pr_warn("%s: trim submit_queues (was %d) to nr_cpu_ids=%u\n",

drivers/scsi/scsi_debug.c

9587

pr_warn("%s: trim poll_queues to 0. poll_q/nr_hw = (%d/%d)\n",

drivers/scsi/scsi_debug.c

9599

pr_warn("%s: trim poll_queues to 1\n", my_name);

drivers/scsi/scsi_debug.c

9601

pr_warn("%s: trim poll_queues to 1. Perhaps try poll_queues=%d\n",

drivers/scsi/sg.c

1500

pr_warn("%s: get scsi_device queue failed\n", __func__);

drivers/scsi/sg.c

1507

pr_warn("%s: cdev_alloc failed\n", __func__);

drivers/scsi/sg.c

1515

pr_warn("%s: sg_alloc failed\n", __func__);

drivers/scsi/sg.c

1543

pr_warn("%s: sg_sys Invalid\n", __func__);

drivers/scsi/smartpqi/smartpqi_init.c

9447

pr_warn("%s: invalid lockup action setting \"%s\" - supported settings: none, reboot, panic\n",

drivers/scsi/smartpqi/smartpqi_init.c

9460

pr_warn("%s: ctrl_ready_timeout parm of %u second(s) is less than minimum timeout of %d seconds - setting timeout to %d seconds\n",

drivers/scsi/smartpqi/smartpqi_init.c

9464

pr_warn("%s: ctrl_ready_timeout parm of %u seconds is greater than maximum timeout of %d seconds - setting timeout to %d seconds\n",

drivers/scsi/st.c

4454

pr_warn("st: idr allocation failed: %d\n", error);

drivers/sh/intc/core.c

103

pr_warn("missing unique irq mask for irq %d (vect 0x%04x)\n",

drivers/soc/atmel/soc.c

293

pr_warn("Could not map DBGU iomem range");

drivers/soc/atmel/soc.c

324

pr_warn("Could not map DBGU iomem range");

drivers/soc/atmel/soc.c

354

pr_warn("Could not find identification node");

drivers/soc/atmel/soc.c

367

pr_warn("Could not find matching SoC description\n");

drivers/soc/atmel/soc.c

383

pr_warn("Could not register SoC device\n");

drivers/soc/bcm/brcmstb/pm/pm-mips.c

407

pr_warn("Too many MEMCs (max %d)\n", MAX_NUM_MEMC);

drivers/soc/fsl/dpaa2-console.c

138

pr_warn("expected = %08x, read = %08x\n",

drivers/soc/nuvoton/wpcm450-soc.c

67

pr_warn("Unknown chip ID in GCR.PDID: 0x%06x\n", PDID_CHIP(pdid));

drivers/soc/nuvoton/wpcm450-soc.c

73

pr_warn("Unknown chip revision in GCR.PDID: 0x%02x\n", PDID_REV(pdid));

drivers/soc/nuvoton/wpcm450-soc.c

87

pr_warn("Could not register SoC device\n");

drivers/soc/renesas/rcar-rst.c

139

pr_warn("%pOF: Cannot map regs\n", np);

drivers/soc/renesas/rcar-rst.c

152

pr_warn("%pOF: Cannot run SoC specific configuration\n",

drivers/soc/renesas/renesas-soc.c

529

pr_warn("SoC mismatch (product = 0x%x)\n", product);

drivers/soc/samsung/gs101-pmu.c

353

pr_warn("%s(): SMC failed: %d\n", __func__, (int)res.a0);

drivers/soc/samsung/gs101-pmu.c

370

pr_warn("%s(): SMC failed: %d\n", __func__, (int)res.a0);

drivers/soc/tegra/fuse/fuse-tegra.c

523

pr_warn("Unsupported SoC: %02x\n", chip);

drivers/soc/tegra/fuse/speedo-tegra124.c

115

pr_warn("Tegra Warning: Speedo value not fused.\n");

drivers/soc/tegra/fuse/speedo-tegra30.c

219

pr_warn("Tegra Unknown SKU %d\n", sku_info->sku_id);

drivers/soc/tegra/fuse/speedo-tegra30.c

227

pr_warn("Tegra Unknown chip rev %d\n", sku_info->revision);

drivers/soc/tegra/fuse/speedo-tegra30.c

259

pr_warn("Tegra CPU speedo value %3d out of range",

drivers/soc/tegra/fuse/speedo-tegra30.c

272

pr_warn("Tegra SoC speedo value %3d out of range",

drivers/soc/tegra/fuse/tegra-apbmisc.c

225

pr_warn("Using APBMISC region %pR\n", &apbmisc);

drivers/soc/tegra/fuse/tegra-apbmisc.c

226

pr_warn("Using strapping options registers %pR\n",

drivers/soc/tegra/pmc.c

4744

pr_warn("DT node not found, powergating disabled\n");

drivers/soc/tegra/pmc.c

4750

pr_warn("Using memory region %pR\n", &regs);

drivers/soc/tegra/pmc.c

516

pr_warn("%s(): SMC failed: %lu\n", __func__,

drivers/soc/tegra/pmc.c

539

pr_warn("%s(): SMC failed: %lu\n", __func__,

drivers/soc/ti/pm33xx.c

443

pr_warn("PM: could not iomap rtc\n");

drivers/soc/ti/pm33xx.c

450

pr_warn("PM: rtc0 not available\n");

drivers/soc/ti/pm33xx.c

461

pr_warn("PM: bootloader does not support rtc-only!\n");

drivers/soc/ti/pm33xx.c

470

pr_warn("PM: no-rtc available, rtc-only mode disabled.\n");

drivers/soc/ti/smartreflex.c

345

pr_warn("%s: NULL omap_sr from %pS\n",

drivers/soc/ti/smartreflex.c

412

pr_warn("%s: NULL omap_sr from %pS\n",

drivers/soc/ti/smartreflex.c

467

pr_warn("%s: NULL omap_sr from %pS\n",

drivers/soc/ti/smartreflex.c

552

pr_warn("%s: NULL omap_sr from %pS\n",

drivers/soc/ti/smartreflex.c

608

pr_warn("%s: NULL omap_sr from %pS\n",

drivers/soc/ti/smartreflex.c

652

pr_warn("%s:, Smartreflex class data passed is NULL\n",

drivers/soc/ti/smartreflex.c

658

pr_warn("%s: Smartreflex class driver already registered\n",

drivers/soc/ti/smartreflex.c

690

pr_warn("%s: omap_sr struct for voltdm not found\n", __func__);

drivers/soc/ti/smartreflex.c

722

pr_warn("%s: omap_sr struct for voltdm not found\n", __func__);

drivers/soc/ti/smartreflex.c

754

pr_warn("%s: omap_sr struct for voltdm not found\n", __func__);

drivers/soc/ti/smartreflex.c

776

pr_warn("%s: omap_sr struct not found\n", __func__);

drivers/soc/ti/smartreflex.c

790

pr_warn("%s: omap_sr struct not found\n", __func__);

drivers/soc/ti/smartreflex.c

796

pr_warn("%s: Invalid argument %lld\n", __func__, val);

drivers/soc/ti/smartreflex.c

882

pr_warn("%s: Error in SR late init\n", __func__);

drivers/soc/xilinx/xlnx_event_manager.c

234

pr_warn("Didn't find any registered callback for suspend event\n");

drivers/soc/xilinx/xlnx_event_manager.c

276

pr_warn("Didn't find any registered callback for 0x%x 0x%x\n",

drivers/soc/xilinx/xlnx_event_manager.c

460

pr_warn("Didn't find any registered callback for suspend event\n");

drivers/soc/xilinx/xlnx_event_manager.c

497

pr_warn("Unhandled SGI node 0x%x event 0x%x. Expected with Xen hypervisor\n",

drivers/soundwire/stream.c

44

pr_warn("Requested column not found, selecting lowest column no: 2\n");

drivers/soundwire/stream.c

58

pr_warn("Requested row not found, selecting lowest row no: 48\n");

drivers/spi/spi-fsl-dspi.c

836

pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld, we use the max prescaler value.\n",

drivers/spi/spi-fsl-dspi.c

870

pr_warn("Cannot find correct scale values for %dns delay at clkrate %ld, using max prescaler value",

drivers/spi/spi-lm70llp.c

197

pr_warn("spi_lm70llp instance already loaded. Aborting.\n");

drivers/spi/spi.c

509

pr_warn("SPI driver %s has no spi_device_id for %s\n",

drivers/ssb/host_soc.c

189

pr_warn("Couldn't parse nvram board vendor entry with value \"%s\"\n",

drivers/ssb/host_soc.c

199

pr_warn("Couldn't parse nvram board type entry with value \"%s\"\n",

drivers/ssb/pci.c

843

pr_warn("Unsupported SPROM revision %d detected. Will extract v1\n",

drivers/ssb/pci.c

908

pr_warn("WARNING: Using fallback SPROM failed (err %d)\n",

drivers/ssb/scan.c

376

pr_warn("WARNING: Multiple EXTIFs found\n");

drivers/ssb/scan.c

384

pr_warn("WARNING: Multiple ChipCommon found\n");

drivers/ssb/scan.c

393

pr_warn("WARNING: Multiple MIPS cores found\n");

drivers/ssb/scan.c

415

pr_warn("WARNING: Multiple PCI(E) cores found\n");

drivers/staging/greybus/audio_manager.c

104

pr_warn("Not all nodes were deleted\n");

drivers/staging/greybus/audio_manager_sysfs.c

91

pr_warn("creating the sysfs entry for %s failed: %d\n",

drivers/staging/media/av7110/av7110.c

2653

pr_warn("Warning, firmware version 0x%04x is too old. System might be unstable!\n",

drivers/staging/media/av7110/av7110_hw.c

481

pr_warn("%s(): len=%d is too big!\n", __func__, num);

drivers/staging/media/av7110/av7110_hw.c

831

pr_warn("warning: timeout waiting in LoadBitmap: %d, %d\n", ret, av7110->bmp_state);

drivers/staging/media/av7110/sp8870.h

28

pr_warn(KBUILD_MODNAME ": %s(): driver disabled by Kconfig\n", __func__);

drivers/staging/media/ipu3/ipu3-css-fw.c

86

pr_warn("parameter size doesn't match defined size\n");

drivers/staging/media/meson/vdec/codec_vp9.c

1057

pr_warn("%s: FIXME, would need to save ref %d\n",

drivers/staging/media/meson/vdec/codec_vp9.c

1114

pr_warn("%s: couldn't find VP9 ref %d\n", __func__,

drivers/staging/most/dim2/dim2.c

480

pr_warn("%s: fixed buffer size (%d -> %d)\n",

drivers/staging/most/dim2/dim2.c

494

pr_warn("%s: fixed buffer size (%d -> %d)\n",

drivers/staging/most/dim2/dim2.c

509

pr_warn("%s: fixed buffer size (%d -> %d)\n",

drivers/staging/most/dim2/dim2.c

523

pr_warn("%s: fixed buffer size (%d -> %d)\n",

drivers/staging/octeon/ethernet-mem.c

130

pr_warn("Freeing of pool %u had too many buffers (%d)\n",

drivers/staging/octeon/ethernet-mem.c

133

pr_warn("Warning: Freeing of pool %u is missing %d buffers\n",

drivers/staging/octeon/ethernet-mem.c

62

pr_warn("Freeing of pool %u had too many skbuffs (%d)\n",

drivers/staging/octeon/ethernet-mem.c

65

pr_warn("Freeing of pool %u is missing %d skbuffs\n",

drivers/staging/octeon/ethernet-mem.c

96

pr_warn("Unable to allocate %u bytes for FPA pool %d\n",

drivers/staging/sm750fb/sm750.c

1136

pr_warn("no options.\n");

drivers/staging/sm750fb/sm750.c

810

pr_warn("use specified mode:%s in %s,with an ignored refresh rate\n",

drivers/staging/sm750fb/sm750.c

815

pr_warn("wanna use default mode\n");

drivers/staging/sm750fb/sm750.c

818

pr_warn("fall back to any valid mode\n");

drivers/staging/sm750fb/sm750.c

820

pr_warn("ret = %d,fb_find_mode failed,with %s\n",

drivers/staging/vme_user/vme_user.c

312

pr_warn("Partial copy from userspace\n");

drivers/staging/vme_user/vme_user.c

338

pr_warn("Partial copy to userspace\n");

drivers/staging/vme_user/vme_user.c

347

pr_warn("Can't adjust mapped window\n");

drivers/staging/vme_user/vme_user.c

353

pr_warn("Partial copy from userspace\n");

drivers/staging/vme_user/vme_user.c

383

pr_warn("Partial copy to userspace\n");

drivers/staging/vme_user/vme_user.c

393

pr_warn("Partial copy from userspace\n");

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1472

pr_warn("csk %u without VLAN Tag on DCB Link\n", csk->tid);

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1858

pr_warn("csk 0x%p,%u, cr %u,%u+%u, < %u.\n",

drivers/target/iscsi/cxgbit/cxgbit_cm.c

1878

pr_warn("csk 0x%p,%u, snd_una %u/%u.",

drivers/target/iscsi/cxgbit/cxgbit_ddp.c

304

pr_warn("%s, iscsi NOT enabled, check config!\n", ndev->name);

drivers/target/iscsi/iscsi_target.c

1032

pr_warn("ISCSI_FLAG_CMD_READ or ISCSI_FLAG_CMD_WRITE"

drivers/target/iscsi/iscsi_target_configfs.c

88

pr_warn("Unable to request_module for %s\n",

drivers/target/iscsi/iscsi_target_login.c

404

pr_warn("Aligning ISER MaxRecvDataSegmentLength: %lu down"

drivers/target/sbp/sbp_target.c

284

pr_warn("failed to read peer GUID: %d\n", ret);

drivers/target/sbp/sbp_target.c

326

pr_warn("refusing exclusive login with other active logins\n");

drivers/target/sbp/sbp_target.c

339

pr_warn("refusing login while another exclusive login present\n");

drivers/target/sbp/sbp_target.c

353

pr_warn("max number of logins reached\n");

drivers/target/sbp/sbp_target.c

500

pr_warn("failed to read peer GUID: %d\n", ret);

drivers/target/sbp/sbp_target.c

560

pr_warn("cannot find login: %d\n", id);

drivers/target/sbp/sbp_target.c

572

pr_warn("logout from different node ID\n");

drivers/target/target_core_alua.c

1400

pr_warn("ALUA LU Group already has a valid ID,"

drivers/target/target_core_alua.c

1422

pr_warn("ALUA Logical Unit Group ID: %hu"

drivers/target/target_core_alua.c

155

pr_warn("REPORT TARGET PORT GROUPS allocation length %u too"

drivers/target/target_core_alua.c

1668

pr_warn("ALUA TG PT Group already has a valid ID,"

drivers/target/target_core_alua.c

285

pr_warn("SET TARGET PORT GROUPS parameter list length %u too"

drivers/target/target_core_alua.c

65

pr_warn("REPORT REFERRALS allocation length %u too"

drivers/target/target_core_configfs.c

3231

pr_warn("Ran out of lu_gp_show_attr"

drivers/target/target_core_configfs.c

646

pr_warn("dev[%p]: Backstore name '%s' is too long for "

drivers/target/target_core_configfs.c

862

pr_warn("DIF protection enabled on underlying hardware,"

drivers/target/target_core_configfs.c

964

pr_warn("DIF protection enabled on underlying hardware,"

drivers/target/target_core_configfs.c

969

pr_warn("DIF protection not supported by backend, ignoring\n");

drivers/target/target_core_file.c

559

pr_warn("FILEIO: blkdev_issue_discard() failed: %d\n",

drivers/target/target_core_file.c

575

pr_warn("FILEIO: fallocate() failed: %d\n", ret);

drivers/target/target_core_pr.c

1523

pr_warn("SPC-PR: Received PR OUT parameter list"

drivers/target/target_core_pr.c

1587

pr_warn("SPC-PR: enforce_pr_isids is set but a isid has not been sent in the SPEC_I_PT data for %s.",

drivers/target/target_core_pr.c

2069

pr_warn("SPC-3 PR: Reservation Key non-zero"

drivers/target/target_core_pr.c

2801

pr_warn("pr_reg->pr_res_holder still set\n");

drivers/target/target_core_pr.c

3190

pr_warn("SPC-3 PR REGISTER_AND_MOVE: Received"

drivers/target/target_core_pr.c

3200

pr_warn("SPC-3 PR REGISTER_AND_MOVE: Received zero"

drivers/target/target_core_pr.c

3391

pr_warn("SPC-3 PR REGISTER_AND_MOVE: No reservation"

drivers/target/target_core_pr.c

3404

pr_warn("SPC-3 PR REGISTER_AND_MOVE: Calling I_T"

drivers/target/target_core_pr.c

3421

pr_warn("SPC-3 PR REGISTER_AND_MOVE: Unable to move"

drivers/target/target_core_pr.c

3614

pr_warn("SPC-PR: Received PR OUT parameter list"

drivers/target/target_core_pr.c

3674

pr_warn("SPC-PR: Received PR OUT illegal parameter"

drivers/target/target_core_pr.c

3985

pr_warn("SPC-3 PRIN READ_FULL_STATUS ran"

drivers/target/target_core_sbc.c

1150

pr_warn("UNMAP parameter list length %u too small\n",

drivers/target/target_core_sbc.c

1164

pr_warn("UNMAP parameter list length %u too small, ignoring bd_dl %u\n",

drivers/target/target_core_sbc.c

289

pr_warn("WRITE_SAME sectors: %u exceeds max_write_same_len: %u\n",

drivers/target/target_core_sbc.c

305

pr_warn("WRITE SAME with ANCHOR not supported\n");

drivers/target/target_core_sbc.c

310

pr_warn("WRITE SAME with NDOB not supported\n");

drivers/target/target_core_sbc.c

417

pr_warn("Detected MISCOMPARE at offset %u\n",

drivers/target/target_core_spc.c

1109

pr_warn("MODE_SENSE: Invalid subpage code: 0x%02x\n", subpage);

drivers/target/target_core_spc.c

68

pr_warn("Cannot find VERSION DESCRIPTOR value for unknown SCSI"

drivers/target/target_core_tpg.c

163

pr_warn("Queue depth for %s Initiator Node: %s is 0,"

drivers/target/target_core_transport.c

1659

pr_warn("Rejecting SCSI DATA overflow for fabric using"

drivers/target/target_core_user.c

1043

pr_warn("TCMU: Request of size %zu is too big for %zu data area\n",

drivers/target/target_core_user.c

1061

pr_warn("TCMU: Request of size %zu is too big for %u cmd ring\n",

drivers/target/target_core_user.c

1350

pr_warn("TCMU: Userspace set UNKNOWN_OP flag on se_cmd %p\n",

drivers/target/target_core_user.c

1379

pr_warn("TCMU: data direction was %d!\n",

drivers/target/target_core_user.c

2017

pr_warn("Failing nl cmd %d on %s. Interface is blocked.\n", cmd,

drivers/target/target_core_user.c

2024

pr_warn("netlink cmd %d already executing on %s\n",

drivers/tee/amdtee/call.c

60

pr_warn("%s: Discarding value c", __func__);

drivers/tee/optee/ffa_abi.c

525

pr_warn("Unknown RPC func 0x%x\n", cmd);

drivers/tee/optee/smc_abi.c

1493

pr_warn("missing \"method\" property\n");

drivers/tee/optee/smc_abi.c

1502

pr_warn("invalid \"method\" property: %s\n", method);

drivers/tee/optee/smc_abi.c

1612

pr_warn("image loading failed\n");

drivers/tee/optee/smc_abi.c

1624

pr_warn("OP-TEE image loaded from kernel, this can be insecure");

drivers/tee/optee/smc_abi.c

1644

pr_warn("Failed with CPU hotplug setup for OP-TEE");

drivers/tee/optee/smc_abi.c

1753

pr_warn("api uid mismatch\n");

drivers/tee/optee/smc_abi.c

1758

pr_warn("api revision mismatch\n");

drivers/tee/optee/smc_abi.c

1766

pr_warn("capabilities mismatch\n");

drivers/tee/optee/smc_abi.c

866

pr_warn("Unknown RPC func 0x%x\n",

drivers/thermal/cpufreq_cooling.c

534

pr_warn("No cpu device for cpu %d\n", policy->cpu);

drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c

108

pr_warn("_TRT package %d is invalid, ignored\n", i);

drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c

115

pr_warn("Failed to get source ACPI device\n");

drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c

118

pr_warn("Failed to get target ACPI device\n");

drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c

183

pr_warn("_ART package %d is invalid, ignored", i);

drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c

191

pr_warn("Failed to get source ACPI device\n");

drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c

194

pr_warn("Failed to get target ACPI device\n");

drivers/thermal/intel/int340x_thermal/acpi_thermal_rel.c

355

pr_warn("Failed to get device name from acpi handle\n");

drivers/thermal/intel/int340x_thermal/int3403_thermal.c

173

pr_warn("Invalid PPSS data\n");

drivers/thermal/intel/intel_soc_dts_thermal.c

71

pr_warn("intel_soc_dts: Could not get IRQ for GSI %d, err %d\n",

drivers/thermal/intel/intel_soc_dts_thermal.c

88

pr_warn("request_threaded_irq ret %d\n", err);

drivers/thermal/intel/therm_throt.c

349

pr_warn("CPU%d: %s temperature is above threshold, cpu clock is throttled (total events = %lu)\n",

drivers/thermal/thermal_core.c

1940

pr_warn("Thermal: Can not register suspend notifier, return %d\n",

drivers/tty/ehv_bytechan.c

325

pr_warn("ehv-bc: udbg handle %u is not the stdout handle\n",

drivers/tty/hvc/hvc_dcc.c

286

pr_warn("\n");

drivers/tty/hvc/hvc_dcc.c

287

pr_warn("********************************************************************\n");

drivers/tty/hvc/hvc_dcc.c

288

pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");

drivers/tty/hvc/hvc_dcc.c

289

pr_warn("** **\n");

drivers/tty/hvc/hvc_dcc.c

290

pr_warn("** HVC_DCC_SERIALIZE_SMP SUPPORT HAS BEEN ENABLED IN THIS KERNEL **\n");

drivers/tty/hvc/hvc_dcc.c

291

pr_warn("** **\n");

drivers/tty/hvc/hvc_dcc.c

292

pr_warn("** This means that this is a DEBUG kernel and unsafe for **\n");

drivers/tty/hvc/hvc_dcc.c

293

pr_warn("** production use and has important feature like CPU hotplug **\n");

drivers/tty/hvc/hvc_dcc.c

294

pr_warn("** disabled. **\n");

drivers/tty/hvc/hvc_dcc.c

295

pr_warn("** **\n");

drivers/tty/hvc/hvc_dcc.c

296

pr_warn("** If you see this message and you are not debugging the **\n");

drivers/tty/hvc/hvc_dcc.c

297

pr_warn("** kernel, report this immediately to your vendor! **\n");

drivers/tty/hvc/hvc_dcc.c

298

pr_warn("** **\n");

drivers/tty/hvc/hvc_dcc.c

299

pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");

drivers/tty/hvc/hvc_dcc.c

300

pr_warn("********************************************************************\n");

drivers/tty/hvc/hvc_iucv.c

1413

pr_warn("hvc_iucv= invalid parameter value '%s'\n", val);

drivers/tty/serial/8250/8250_hp300.c

122

pr_warn("Serial console is APCI but support is disabled (CONFIG_HPAPCI)!\n");

drivers/tty/serial/8250/8250_hp300.c

145

pr_warn("Serial console is DCA but support is disabled (CONFIG_HPDCA)!\n");

drivers/tty/serial/8250/8250_hp300.c

151

pr_warn("%s: early_serial_setup() failed.\n", __func__);

drivers/tty/serial/amba-pl011.c

3105

pr_warn("could not register SBSA UART platform driver\n");

drivers/tty/serial/cpm_uart.c

1232

pr_warn("cpm_uart[%d]: device tree references "

drivers/tty/serial/earlycon.c

128

pr_warn("[%s] unsupported earlycon uart clkrate option\n",

drivers/tty/serial/earlycon.c

293

pr_warn("[%s] bad address\n", match->name);

drivers/tty/serial/earlycon.c

322

pr_warn("[%s] unsupported reg-io-width\n", match->name);

drivers/tty/serial/kgdboc.c

507

pr_warn("kgdboc_earlycon is still using bootconsole\n");

drivers/tty/serial/ma35d1_serial.c

561

pr_warn("Failed to write on console port %x, out of range\n",

drivers/tty/serial/samsung_tty.c

1900

pr_warn("uart: failed to enable baudclk\n");

drivers/tty/tty.h

14

#define tty_warn(tty, f, ...) tty_msg(pr_warn, tty, f, ##__VA_ARGS__)

drivers/tty/tty_io.c

264

pr_warn("(%d:%d): %s: NULL tty\n",

drivers/tty/tty_ldisc.c

497

pr_warn("Falling back ldisc for %s.\n", name);

drivers/tty/vt/keyboard.c

1401

pr_warn("can't emulate rawmode for keycode %d\n",

drivers/tty/vt/keyboard.c

970

pr_warn("keyboard mode must be unicode for braille patterns\n");

drivers/tty/vt/vt.c

4408

pr_warn("Unable to create device for %s; errno = %ld\n",

drivers/tty/vt/vt.c

4544

pr_warn("Unable to create vt console class; errno = %d\n", i);

drivers/tty/vt/vt.c

4558

pr_warn("Unable to create device for %s; errno = %ld\n",

drivers/tty/vt/vt.c

4668

pr_warn("unblank_screen: tty %d not allocated ??\n",

drivers/usb/atm/xusbatm.c

182

pr_warn("xusbatm: malformed module parameters\n");

drivers/usb/gadget/function/f_fs.c

1709

pr_warn("FFS: Failed to queue DMABUF: %d\n", ret);

drivers/usb/gadget/function/f_fs.c

2719

pr_warn("bcdVersion must be 0x0100, stored in Little Endian order. "

drivers/usb/gadget/function/f_fs.c

956

pr_warn("functionfs read size %d > requested size %zd, splitting request into multiple reads.",

drivers/usb/gadget/function/f_tcm.c

1070

pr_warn(CMD_DIR_MSG, cdb[0]);

drivers/usb/gadget/function/rndis.c

473

pr_warn("%s: query unknown OID 0x%08X\n", __func__, OID);

drivers/usb/gadget/function/rndis.c

544

pr_warn("%s: set unknown OID 0x%08X, size %d\n",

drivers/usb/gadget/function/rndis.c

856

pr_warn("%s: unknown RNDIS message 0x%08X len %d\n",

drivers/usb/gadget/function/storage_common.h

32

#define LWARN(lun, fmt, args...) _LMSG(pr_warn, lun, fmt, ## args)

drivers/usb/gadget/function/u_serial.c

393

pr_warn("ttyGS%d: unexpected RX status %d\n",

drivers/usb/gadget/function/u_serial.c

480

pr_warn("%s: unexpected %s status %d\n",

drivers/usb/gadget/function/u_serial.c

936

pr_warn("%s: unexpected %s status %d\n",

drivers/usb/gadget/udc/at91_udc.h

172

#define WARNING(stuff...) pr_warn("udc: " stuff)

drivers/usb/gadget/udc/atmel_usba_udc.c

1564

pr_warn("udc: Invalid packet length %u (expected %zu)\n",

drivers/usb/gadget/udc/core.c

1721

pr_warn("%s: driver registration failed: %d\n",

drivers/usb/gadget/udc/core.c

1729

pr_warn("%s: couldn't find an available UDC or it's busy\n",

drivers/usb/gadget/udc/m66592-udc.c

637

pr_warn("m66592-udc: xtal configuration error\n");

drivers/usb/gadget/udc/m66592-udc.c

649

pr_warn("m66592-udc: irq trigger config error\n");

drivers/usb/gadget/udc/omap_udc.h

191

#define WARNING(stuff...) pr_warn("udc: " stuff)

drivers/usb/gadget/udc/pxa25x_udc.h

239

#define WARNING(stuff...) pr_warn("udc: " stuff)

drivers/usb/host/fsl-mph-dr-of.c

55

pr_warn("%pOF: Invalid 'dr_mode' property, fallback to host mode\n",

drivers/usb/host/uhci-hcd.h

590

pr_warn("UHCI: Unsupported register 0x%02x on Aspeed\n", reg);

drivers/usb/host/xhci-dbgtty.c

428

pr_warn("ttyDBC0: unexpected RX status %d\n",

drivers/usb/misc/legousbtower.c

692

pr_warn("read_buffer overflow, %d bytes dropped\n",

drivers/usb/phy/phy-fsl-usb.c

820

pr_warn(FSL_OTG_NAME ": unable to register OTG transceiver.\n");

drivers/usb/storage/alauda.c

420

pr_warn("alauda_init_media: Unrecognised media signature: %4ph\n",

drivers/usb/usbip/vudc_rx.c

238

pr_warn("v_rx exit with error %d", ret);

drivers/usb/usbip/vudc_tx.c

232

pr_warn("v_tx exit with error %d", ret);

drivers/vfio/pci/vfio_pci.c

239

pr_warn("invalid id string \"%s\"\n", id);

drivers/vfio/pci/vfio_pci.c

246

pr_warn("failed to add dynamic id [%04x:%04x[%04x:%04x]] class %#08x/%08x (%d)\n",

drivers/vfio/pci/vfio_pci.c

275

pr_warn("device denylist disabled.\n");

drivers/vfio/vfio_iommu_spapr_tce.c

1277

pr_warn("tce_vfio: Group %d is already attached\n",

drivers/vfio/vfio_iommu_spapr_tce.c

1285

pr_warn("tce_vfio: Group %d is incompatible with group %d\n",

drivers/vfio/vfio_iommu_spapr_tce.c

1335

pr_warn("tce_vfio: detaching unattached group #%u\n",

drivers/vfio/vfio_iommu_type1.c

2343

pr_warn("%s: No interrupt remapping support. Use the module param \"allow_unsafe_interrupts\" to enable VFIO IOMMU support on this platform\n",

drivers/vfio/vfio_iommu_type1.c

771

pr_warn("%s: RLIMIT_MEMLOCK (%ld) exceeded\n",

drivers/vfio/vfio_iommu_type1.c

864

pr_warn("%s: Task %s (%d) RLIMIT_MEMLOCK "

drivers/vhost/scsi.c

2040

pr_warn("target_depend_item() failed: %d\n", ret);

drivers/vhost/scsi.c

2151

pr_warn("tv_tport->tport_name: %s, tpg->tport_tpgt: %hu"

drivers/video/backlight/backlight.c

671

pr_warn("Unable to create backlight class; errno = %d\n", ret);

drivers/video/backlight/lcd.c

331

pr_warn("Unable to create backlight class; errno = %d\n", ret);

drivers/video/fbdev/aty/radeon_base.c

2435

pr_warn("%s() Creating sysfs files failed, continuing\n",

drivers/video/fbdev/au1100fb.c

714

pr_warn("Panel '%s' not supported!", this_opt);

drivers/video/fbdev/au1100fb.c

720

pr_warn("Unsupported option \"%s\"", this_opt);

drivers/video/fbdev/core/fbcon.c

465

pr_warn("Ignoring scrollback size option\n");

drivers/video/fbdev/core/fbmem.c

298

pr_warn("WARNING: fbcon: Driver '%s' missed to adjust virtual screen size (%ux%u vs. %ux%u)\n",

drivers/video/fbdev/core/fbmem.c

747

pr_warn("Driver %s not loading because of nomodeset parameter\n",

drivers/video/fbdev/core/fbsysfs.c

465

pr_warn("Unable to create device for framebuffer %d; error %d\n", node, ret);

drivers/video/fbdev/efifb.c

181

pr_warn("efifb: Ignoring BGRT: failed to map image memory\n");

drivers/video/fbdev/efifb.c

242

pr_warn("efifb: Ignoring BGRT: unexpected or invalid BMP data\n");

drivers/video/fbdev/efifb.c

445

pr_warn("efifb: cannot reserve video memory at 0x%lx\n",

drivers/video/fbdev/pxafb.c

1176

pr_warn("%s: timeout waiting for command done\n", __func__);

drivers/video/fbdev/pxafb.c

1422

pr_warn("Unable to %s LCD supply regulator: %d\n",

drivers/video/fbdev/pxafb.c

648

pr_warn("%s: timeout disabling overlay1\n", __func__);

drivers/video/fbdev/pxafb.c

713

pr_warn("%s: timeout disabling overlay2\n", __func__);

drivers/video/fbdev/smscufx.c

1378

pr_warn("I2C read failed, 0x1100=0x%08x", tmp);

drivers/video/fbdev/smscufx.c

1390

pr_warn("I2C access timed out, resetting I2C hardware");

drivers/video/fbdev/smscufx.c

1441

pr_warn("edid data contains all 0xff");

drivers/video/fbdev/smscufx.c

162

pr_warn("Failed to read register index 0x%08x\n", index);

drivers/video/fbdev/smscufx.c

189

pr_warn("Failed to write register index 0x%08x with value "

drivers/video/fbdev/smscufx.c

1908

pr_warn("wait for urb interrupted: %x available: %d\n",

drivers/video/fbdev/smscufx.c

35

({ if (status < 0) pr_warn(fmt, ##args); })

drivers/video/fbdev/smscufx.c

38

({ if (status < 0) { pr_warn(fmt, ##args); return status; } })

drivers/video/fbdev/smscufx.c

41

({ if (status < 0) { pr_warn(fmt, ##args); goto error; } })

drivers/video/fbdev/smscufx.c

872

pr_warn("ufx_handle_damage unable to get urb");

drivers/video/fbdev/uvesafb.c

1171

pr_warn("save hardware state failed, error code is %ld!\n",

drivers/video/fbdev/uvesafb.c

1283

pr_warn("mode switch failed (eax=0x%x, err=%d) - trying again with default timings\n",

drivers/video/fbdev/uvesafb.c

156

pr_warn("message too long (%d), can't execute task\n",

drivers/video/fbdev/uvesafb.c

1848

pr_warn("unrecognized option %s\n", this_opt);

drivers/video/fbdev/uvesafb.c

1853

pr_warn("uvesafb: mtrr should be set to 0 or 3; %d is unsupported", mtrr);

drivers/video/fbdev/uvesafb.c

1906

pr_warn("failed to register attributes\n");

drivers/video/fbdev/uvesafb.c

380

pr_warn("VBE get state call failed (eax=0x%x, err=%d)\n",

drivers/video/fbdev/uvesafb.c

411

pr_warn("VBE state restore call failed (eax=0x%x, err=%d)\n",

drivers/video/fbdev/uvesafb.c

508

pr_warn("Getting mode info block for mode 0x%x failed (eax=0x%x, err=%d)\n",

drivers/video/fbdev/uvesafb.c

772

pr_warn("VBE state buffer size cannot be determined (eax=0x%x, err=%d)\n",

drivers/video/fbdev/uvesafb.c

807

pr_warn("NX protection is active, better not use the PMI\n");

drivers/video/fbdev/xen-fbfront.c

372

pr_warn("display parameters %d,%d,%d invalid, use defaults\n",

drivers/video/nomodeset.c

20

pr_warn("Booted with the nomodeset parameter. Only the system framebuffer will be available\n");

drivers/video/screen_info_pci.c

45

pr_warn("Invalid relocating, disabling firmware framebuffer\n");

drivers/video/sticore.c

1087

pr_warn("Unable to handle STI device '%s'\n", pci_name(pd));

drivers/video/sticore.c

477

pr_warn("STI pci region mapping for region %d (%02x) can't be mapped\n",

drivers/video/sticore.c

822

pr_warn("No font found for STI at %08lx\n", address);

drivers/video/sticore.c

895

pr_warn("Sorry, this GSC/STI card is not yet supported.\n");

drivers/video/sticore.c

896

pr_warn("Please see https://parisc.wiki.kernel.org/"

drivers/video/sticore.c

914

pr_warn("maximum number of STI ROMS reached !\n");

drivers/video/sticore.c

942

pr_warn("PCI ROM is not a STI ROM type image (0x%8x)\n", i);

drivers/virt/coco/guest/report.c

498

pr_warn("\"%s\" unregistered with items present in configfs/tsm/report\n",

drivers/virt/vboxguest/vboxguest_utils.c

60

VBG_LOG(vbg_warn, pr_warn);

drivers/watchdog/alim7101_wdt.c

114

pr_warn("Heartbeat lost! Will not ping the watchdog\n");

drivers/watchdog/at91sam9_wdt.c

380

pr_warn("I quit now, hardware will probably reboot!\n");

drivers/watchdog/bcm47xx_wdt.c

152

pr_warn("timeout value must be 1<=x<=%d, using %d\n",

drivers/watchdog/bcm47xx_wdt.c

78

pr_warn("timeout value must be 1<=x<=%d, using %d\n",

drivers/watchdog/it8712f_wdt.c

331

pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n");

drivers/watchdog/it8712f_wdt.c

334

pr_warn("Watchdog disable failed\n");

drivers/watchdog/it8712f_wdt.c

408

pr_warn("watchdog I/O region busy\n");

drivers/watchdog/it87_wdt.c

393

pr_warn("Timeout value out of range, use default %d sec\n",

drivers/watchdog/m54xx_wdt.c

198

pr_warn("I/O region busy\n");

drivers/watchdog/machzwd.c

399

pr_warn("no ZF-Logic found\n");

drivers/watchdog/mixcomwd.c

297

pr_warn("I quit now, hardware will probably reboot!\n");

drivers/watchdog/pcwd.c

398

pr_warn("Heartbeat lost! Will not ping the watchdog\n");

drivers/watchdog/sbc60xxwdt.c

130

pr_warn("Heartbeat lost! Will not ping the watchdog\n");

drivers/watchdog/sbc_fitpc2_wdt.c

171

pr_warn("Device closed unexpectedly - timer will not stop\n");

drivers/watchdog/sc520_wdt.c

148

pr_warn("Heartbeat lost! Will not ping the watchdog\n");

drivers/watchdog/scx200_wdt.c

108

pr_warn("watchdog device closed unexpectedly, will not disable the watchdog timer\n");

drivers/watchdog/scx200_wdt.c

227

pr_warn("watchdog I/O region busy\n");

drivers/watchdog/w83627hf_wdt.c

238

pr_warn("Stopping previously enabled watchdog until userland kicks in\n");

drivers/watchdog/w83877f_wdt.c

125

pr_warn("Heartbeat lost! Will not ping the watchdog\n");

drivers/watchdog/watchdog_core.c

152

pr_warn("%s: falling back to default timeout (%u)\n", dev_str,

drivers/watchdog/watchdog_core.c

305

pr_warn("watchdog%d: stop_on_reboot not supported\n", wdd->id);

drivers/watchdog/watchdog_core.c

325

pr_warn("watchdog%d: Cannot register restart handler (%d)\n",

drivers/watchdog/watchdog_core.c

334

pr_warn("watchdog%d: Cannot register pm handler (%d)\n",

drivers/watchdog/wdrtas.c

118

pr_warn("could not get sp_spi watchdog timeout (%li). Continuing\n",

drivers/watchdog/wdrtas.c

190

pr_warn("reading the thermal sensor failed: %i\n", result);

drivers/watchdog/wdrtas.c

384

pr_warn("got unexpected close. Watchdog not stopped.\n");

drivers/watchdog/wdrtas.c

515

pr_warn("couldn't get token for get-sensor-state. Trying to continue without temperature support.\n");

drivers/watchdog/wdrtas.c

520

pr_warn("couldn't get token for ibm,get-system-parameter. Trying to continue with a default timeout value of %i seconds.\n",

drivers/watchdog/wdrtas.c

573

pr_warn("couldn't register watchdog temperature misc device. Continuing without temperature support.\n");

drivers/xen/balloon.c

311

pr_warn("set_phys_to_machine() failed, no memory added\n");

drivers/xen/balloon.c

332

pr_warn("Cannot add additional memory (%i)\n", rc);

drivers/xen/efi.c

320

pr_warn("Failed to lookup header 0x%llx in Xen memory map: error %d\n",

drivers/xen/events/events_base.c

1166

pr_warn("unmap irq failed %d\n", rc);

drivers/xen/events/events_base.c

1963

pr_warn("xen map irq failed gsi=%d irq=%d pirq=%d rc=%d\n",

drivers/xen/events/events_base.c

870

pr_warn("Failed to obtain physical IRQ %d\n", info->irq);

drivers/xen/events/events_fifo.c

309

pr_warn("Dropping pending event for port %u\n", port);

drivers/xen/gntdev.c

1125

pr_warn("find_grant_ptes() failure.\n");

drivers/xen/grant-table.c

1468

pr_warn("grant table add_to_physmap failed, err=%d\n",

drivers/xen/grant-table.c

1576

pr_warn("gnttab share frames is not mapped!\n");

drivers/xen/grant-table.c

474

pr_warn("WARNING: g.e. %#x still in use!\n", ref);

drivers/xen/grant-table.c

587

pr_warn("leaking g.e. %#x (pfn %#lx) (total deferred %llu, total leaked %llu)\n",

drivers/xen/grant-table.c

830

pr_warn("Failed to ioremap gnttab share frames (addr=%pa)!\n",

drivers/xen/mcelog.c

227

pr_warn("Failed to find global error info\n");

drivers/xen/mcelog.c

241

pr_warn("Failed to match cpu with apicid %d\n", m.apicid);

drivers/xen/mcelog.c

263

pr_warn("Fail to find bank error info\n");

drivers/xen/mcelog.c

314

pr_warn("Failed to convert this error log, continue acking it anyway\n");

drivers/xen/pci.c

290

pr_warn("Failed to report MMCONFIG reservation"

drivers/xen/pcpu.c

264

pr_warn("Failed to register pcpu%u\n", info->xen_cpuid);

drivers/xen/pcpu.c

364

pr_warn("Failed to bind pcpu virq\n");

drivers/xen/pcpu.c

370

pr_warn("Failed to register pcpu subsys\n");

drivers/xen/pcpu.c

376

pr_warn("Failed to sync pcpu info\n");

drivers/xen/privcmd.c

1719

pr_warn("Kernel is locked down, parameter \"unrestricted\" ignored\n");

drivers/xen/privcmd.c

457

pr_warn("%s Could not alloc %d pfns rc:%d\n", __func__,

drivers/xen/pvcalls-back.c

1050

pr_warn("%s cannot create xenstore transaction\n", __func__);

drivers/xen/pvcalls-back.c

1057

pr_warn("%s write out 'versions' failed\n", __func__);

drivers/xen/pvcalls-back.c

1064

pr_warn("%s write out 'max-page-order' failed\n", __func__);

drivers/xen/pvcalls-back.c

1071

pr_warn("%s write out 'function-calls' failed\n", __func__);

drivers/xen/pvcalls-back.c

1081

pr_warn("%s cannot complete xenstore transaction\n", __func__);

drivers/xen/pvcalls-back.c

346

pr_warn("%s frontend requested ring_order %u, which is > MAX (%u)\n",

drivers/xen/time.c

100

pr_warn("%s: failed to allocate runstate_delta\n",

drivers/xen/time.c

115

pr_warn("%s: cannot accumulate runstate time as runstate_delta is NULL\n",

drivers/xen/unpopulated-alloc.c

116

pr_warn("set_phys_to_machine() failed, no memory added\n");

drivers/xen/xen-acpi-pad.c

105

pr_warn("Unsupported event [0x%x]\n", event);

drivers/xen/xen-acpi-processor.c

233

pr_warn("ACPI CPU%u missing some P-state data (%x), skipping\n",

drivers/xen/xen-acpi-processor.c

259

pr_warn("(_PXX): Hypervisor error (%d) for ACPI CPU%u\n",

drivers/xen/xen-scsiback.c

1305

pr_warn("%s failed\n", __func__);

drivers/xen/xen-scsiback.c

762

pr_warn("Dom%d provided bogus ring requests (%#x - %#x = %u). Halting ring processing\n",

drivers/xen/xen-scsiback.c

986

pr_warn("Virtual ID is already used. Assignment was not performed.\n");

drivers/xen/xenbus/xenbus_comms.c

446

pr_warn("response ring is not quiescent (%08x:%08x): fixing up\n",

drivers/xen/xenbus/xenbus_probe.c

1089

pr_warn("Xenstore state unknown\n");

drivers/xen/xenbus/xenbus_probe.c

1101

pr_warn("Error initializing xenstore comms: %i\n", err);

drivers/xen/xenbus/xenbus_probe.c

964

pr_warn("Cannot update xenstore event channel: %d\n",

drivers/xen/xenbus/xenbus_probe_backend.c

306

pr_warn("shrinker allocation failed\n");

drivers/xen/xenbus/xenbus_probe_frontend.c

257

pr_warn("Timeout connecting to device: %s (local state %d, remote state %d)\n",

drivers/xen/xenbus/xenbus_probe_frontend.c

272

pr_warn("Waiting for devices to initialise: ");

drivers/xen/xenbus/xenbus_probe_frontend.c

39

pr_warn("bad frontend %s\n", nodename);

drivers/xen/xenbus/xenbus_probe_frontend.c

45

pr_warn("bus_id %s no slash\n", bus_id);

drivers/xen/xenbus/xenbus_xs.c

166

pr_warn("xen store gave: unknown error %s\n",

drivers/xen/xenbus/xenbus_xs.c

728

pr_warn("xs_reset_watches failed: %d\n", err);

drivers/xen/xenbus/xenbus_xs.c

780

pr_warn("Failed to release watch %s: %i\n", watch->node, err);

drivers/xen/xlate_mmu.c

237

pr_warn("%s Couldn't balloon alloc %ld pages rc:%d\n", __func__,

drivers/xen/xlate_mmu.c

250

pr_warn("%s Couldn't map %ld pages rc:%d\n", __func__,

fs/affs/amigaffs.c

483

pr_warn("Remounting filesystem read-only\n");

fs/affs/amigaffs.c

497

pr_warn("(device %s): %s(): %pV\n", sb->s_id, function, &vaf);

fs/affs/bitmap.c

289

pr_warn("Bitmap %u invalid - mounting %s read only.\n",

fs/affs/super.c

215

pr_warn("Invalid blocksize (512, 1024, 2048, 4096 allowed)\n");

fs/afs/addr_prefs.c

106

pr_warn("Can't determine address family\n");

fs/afs/addr_prefs.c

113

pr_warn("Can't find closing ']'\n");

fs/afs/addr_prefs.c

123

pr_warn("Subnet mask too large\n");

fs/afs/addr_prefs.c

127

pr_warn("Subnet mask too small\n");

fs/afs/addr_prefs.c

134

pr_warn("Invalid address\n");

fs/afs/addr_prefs.c

259

pr_warn("Wrong number of params\n");

fs/afs/addr_prefs.c

264

pr_warn("Unsupported protocol\n");

fs/afs/addr_prefs.c

274

pr_warn("Invalid priority\n");

fs/afs/addr_prefs.c

339

pr_warn("Wrong number of params\n");

fs/afs/addr_prefs.c

344

pr_warn("Unsupported protocol\n");

fs/afs/addr_prefs.c

448

pr_warn("Invalid Command\n");

fs/afs/addr_prefs.c

45

pr_warn("Too many elements in string\n");

fs/afs/addr_prefs.c

89

pr_warn("Can't find closing ']'\n");

fs/afs/cm_security.c

55

pr_warn("Can't respond to unknown challenge %u:%u",

fs/afs/dir.c

119

pr_warn("[%05zx] %32phN\n", progress, block);

fs/afs/dir.c

136

pr_warn("DIR %llx:%llx is=%llx\n",

fs/afs/dir.c

151

pr_warn("%s(%lx): [%zx] bad magic %04x\n",

fs/afs/dir.c

530

pr_warn("afs_read_dir(): Too many retries\n");

fs/afs/dir_edit.c

470

pr_warn("%llx:%llx:%x: not head of chain b=%x p=%x,%x e=%x %*s",

fs/afs/dir_edit.c

489

pr_warn("%llx:%llx:%x: not prev in chain b=%x p=%x,%x e=%x %*s",

fs/afs/dir_search.c

203

pr_warn("afs_read_dir(): Too many retries\n");

fs/afs/flock.c

338

pr_warn("AFS: Failed to extend lock on {%llx:%llx} error %d\n",

fs/afs/fsclient.c

79

pr_warn("Unknown AFSFetchStatus version %u\n", ntohl(xdr->if_version));

fs/afs/inode.c

122

pr_warn("kAFS: AFS vnode with undefined type %u\n", vnode->status.type);

fs/afs/inode.c

123

pr_warn("kAFS: A=%d m=%o s=%llx v=%llx\n",

fs/afs/inode.c

128

pr_warn("kAFS: vnode %llx:%llx:%x\n",

fs/afs/inode.c

133

pr_warn("kAFS: dir %llx:%llx:%x\n",

fs/afs/inode.c

270

pr_warn("Vnode %llx:%llx:%x changed type %u to %u\n",

fs/afs/inode.c

313

pr_warn("kAFS: vnode modified {%llx:%llu} %llx->%llx %s (op=%x)\n",

fs/afs/rotate.c

275

pr_warn("Fileserver returned unexpected abort %d\n",

fs/afs/rotate.c

471

pr_warn("kAFS: Peer reset %s (op=%x)\n",

fs/afs/super.c

365

pr_warn("kAFS: Can only specify source 'none' with -o dyn\n");

fs/afs/super.c

370

pr_warn("kAFS: No cell specified\n");

fs/afs/vl_rotate.c

65

pr_warn("No record of cell %s\n", cell->name);

fs/afs/yfsclient.c

146

pr_warn("kAFS: %s: Request buffer underflow (%zu<%u)\n",

fs/autofs/dev-ioctl.c

118

pr_warn("invalid device control module version "

fs/autofs/dev-ioctl.c

126

pr_warn(

fs/autofs/dev-ioctl.c

140

pr_warn("invalid path supplied for cmd(0x%08x)\n",

fs/autofs/dev-ioctl.c

348

pr_warn("not allowed to change PID namespace\n");

fs/autofs/dev-ioctl.c

471

pr_warn("per-mount expire timeout is greater than "

fs/autofs/dev-ioctl.c

62

pr_warn("ioctl control interface version mismatch: "

fs/autofs/dev-ioctl.c

699

pr_warn("unknown command 0x%08x\n", command);

fs/autofs/waitq.c

155

pr_warn("bad type %d!\n", type);

fs/befs/debug.c

50

pr_warn("(%s): %pV\n", sb->s_id, &vaf);

fs/cachefiles/cache.c

49

pr_warn("File cache on idmapped mounts not supported");

fs/cachefiles/xattr.c

142

pr_warn("Dirty object in cache\n");

fs/coda/cnode.c

110

pr_warn("%s: coda_iget failed\n", __func__);

fs/coda/dir.c

536

pr_warn("inode %ld, fid %s changed type!\n",

fs/coda/inode.c

245

pr_warn("%s: coda_get_rootfid failed with %d\n",

fs/coda/inode.c

255

pr_warn("Failure of coda_cnode_make for root: error %d\n",

fs/coda/psdev.c

115

pr_warn("coda_downcall opc %d uniq %d, not enough!\n",

fs/coda/psdev.c

121

pr_warn("downcall opc %d, uniq %d, too much!",

fs/coda/psdev.c

137

pr_warn("%s: coda_downcall error: %d\n",

fs/coda/psdev.c

159

pr_warn("%s: msg (%d, %d) not found\n",

fs/coda/psdev.c

167

pr_warn("%s: too much cnt: %d, cnt: %ld, opc: %d, uniq: %d.\n",

fs/coda/psdev.c

246

pr_warn("%s: Venus read %ld bytes of %d in message\n",

fs/coda/psdev.c

311

pr_warn("%s: Not open.\n", __func__);

fs/coda/psdev.c

399

pr_warn("Problem (%d) in init_coda_psdev\n", status);

fs/coda/psdev.c

405

pr_warn("failed to register filesystem!\n");

fs/coda/psdev.c

427

pr_warn("failed to unregister filesystem\n");

fs/coda/upcall.c

521

pr_warn("%s: Venus returns: %d for %s\n",

fs/coda/upcall.c

776

pr_warn("Unexpected interruption.\n");

fs/configfs/dir.c

408

pr_warn("remove_dir (%pd): attributes remain", d);

fs/efivarfs/vars.c

440

pr_warn("efivars: Variable name size exceeds maximum (%lu > 512)\n",

fs/efivarfs/vars.c

445

pr_warn("efivars: get_next_variable: status=%lx\n", status);

fs/efs/dir.c

32

pr_warn("%s(): directory size not a multiple of EFS_DIRBSIZE\n",

fs/efs/dir.c

87

pr_warn("directory entry %d exceeds directory block\n",

fs/efs/file.c

26

pr_warn("%s(): block %d >= %ld (filesize %ld)\n",

fs/efs/file.c

40

pr_warn("%s(): block < 0\n", __func__);

fs/efs/file.c

50

pr_warn("%s(): block %d >= %ld (filesize %ld)\n",

fs/efs/inode.c

135

pr_warn("extent %d has bad magic number in inode %lu\n",

fs/efs/inode.c

165

pr_warn("unsupported inode mode %o\n", inode->i_mode);

fs/efs/inode.c

174

pr_warn("failed to read inode %lu\n", inode->i_ino);

fs/efs/inode.c

95

pr_warn("%s() failed at block %d\n", __func__, block);

fs/efs/namei.c

28

pr_warn("%s(): directory size not a multiple of EFS_DIRBSIZE\n",

fs/efs/super.c

167

pr_warn("SGI disklabel: checksum bad, label corrupted\n");

fs/efs/super.c

289

pr_warn("invalid superblock at block %u\n",

fs/exfat/exfat_fs.h

566

pr_warn("exFAT-fs (%s): " fmt "\n", (sb)->s_id, ##__VA_ARGS__)

fs/ext4/extents_status.c

598

pr_warn("ES assertion failed when merging extents. "

fs/ext4/extents_status.c

705

pr_warn("ES insert assertion failed for "

fs/ext4/extents_status.c

724

pr_warn("ES insert assertion failed for inode: %lu "

fs/ext4/extents_status.c

734

pr_warn("ES insert assertion failed for inode: %lu "

fs/ext4/extents_status.c

747

pr_warn("ES insert assertion failed for inode: %lu "

fs/ext4/extents_status.c

782

pr_warn("ES insert assertion failed for inode: %lu "

fs/ext4/extents_status.c

790

pr_warn("ES insert assertion failed for "

fs/ext4/extents_status.c

796

pr_warn("ES insert assertion failed for "

fs/ext4/extents_status.c

812

pr_warn("ES insert assertion failed for inode: %lu "

fs/ext4/fast_commit.c

2225

pr_warn("Dropping fc block %d because max_replay set\n", off);

fs/ext4/mballoc.c

6191

pr_warn("Failed to read block bitmap\n");

fs/ext4/super.c

1445

pr_warn("%s: inode %ld still in fc list",

fs/filesystems.c

225

pr_warn("%s: truncating file system list\n", __func__);

fs/fuse/cuse.c

287

pr_warn("unknown device info \"%s\"\n", key);

fs/fuse/dax.c

1339

pr_warn("FUSE: map_alignment %u incompatible with dax mem range size %u\n",

fs/fuse/dax.c

342

pr_warn("Failed to removemappings. start=0x%llx end=0x%llx\n",

fs/fuse/dax.c

879

pr_warn("Failed to remove mapping. offset=0x%llx len=0x%llx ret=%d\n",

fs/fuse/dev_uring.c

374

pr_warn("entry teardown qid=%d state=%d expected=%d",

fs/fuse/dev_uring.c

781

pr_warn("%s qid=%d state=%d\n", __func__, ent->queue->qid,

fs/fuse/dir.c

213

pr_warn("Failed to get root inode");

fs/fuse/virtio_fs.c

1203

pr_warn("virtio-fs: suspend/resume not yet supported\n");

fs/gfs2/ops_fstype.c

1123

pr_warn("can't alloc struct gfs2_sbd\n");

fs/gfs2/ops_fstype.c

156

pr_warn("not a GFS2 filesystem\n");

fs/gfs2/ops_fstype.c

1684

pr_warn("path_lookup on %s returned error %d\n",

fs/gfs2/ops_fstype.c

169

pr_warn("Invalid block size\n");

fs/gfs2/ops_fstype.c

1693

pr_warn("gfs2 mount does not exist\n");

fs/gfs2/ops_fstype.c

173

pr_warn("Invalid block size shift\n");

fs/gfs2/ops_fstype.c

231

pr_warn("error %d reading superblock\n", err);

fs/gfs2/util.h

22

pr_warn("fsid=%s: " fmt, (fs)->sd_fsname, ##__VA_ARGS__)

fs/hfs/mdb.c

184

pr_warn("filesystem possibly corrupted, running fsck.hfs is recommended. Mounting read-only.\n");

fs/hfs/mdb.c

200

pr_warn("unable to locate alternate MDB\n");

fs/hfs/mdb.c

201

pr_warn("continuing without an alternate MDB\n");

fs/hfs/mdb.c

241

pr_warn("filesystem was not cleanly unmounted, running fsck.hfs is recommended. Mounting read-only.\n");

fs/hfs/mdb.c

245

pr_warn("filesystem is marked locked, mounting read-only.\n");

fs/hfs/mdb.c

73

pr_warn("next CNID exceeds limit\n");

fs/hfs/mdb.c

77

pr_warn("file count exceeds limit\n");

fs/hfs/mdb.c

81

pr_warn("folder count exceeds limit\n");

fs/hfs/super.c

129

pr_warn("filesystem was not cleanly unmounted, running fsck.hfs is recommended. leaving read-only.\n");

fs/hfs/super.c

133

pr_warn("filesystem is marked locked, leaving read-only.\n");

fs/hfs/super.c

347

pr_warn("can't find a HFS filesystem on dev %s\n",

fs/hfsplus/super.c

387

pr_warn("filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. leaving read-only.\n");

fs/hfsplus/super.c

394

pr_warn("filesystem is marked locked, leaving read-only.\n");

fs/hfsplus/super.c

399

pr_warn("filesystem is marked journaled, leaving read-only.\n");

fs/hfsplus/super.c

464

pr_warn("unable to find HFS+ superblock\n");

fs/hfsplus/super.c

506

pr_warn("Filesystem was not cleanly unmounted, running fsck.hfsplus is recommended. mounting read-only.\n");

fs/hfsplus/super.c

511

pr_warn("Filesystem is marked locked, mounting read-only.\n");

fs/hfsplus/super.c

515

pr_warn("write access to a journaled filesystem is not supported, use the force option at your own risk, mounting read-only.\n");

fs/hfsplus/wrapper.c

201

pr_warn("invalid secondary volume header\n");

fs/inode.c

3045

pr_warn("%s: unreadable inode:%px\n", reason, inode);

fs/inode.c

3058

pr_warn("%s: inode:%px fs:%s mode:%ho opflags:%#x flags:%#x state:%#x count:%d\n",

fs/inode.c

737

pr_warn("invalid mapping:%px\n", mapping);

fs/inode.c

742

pr_warn("aops:%ps\n", a_ops);

fs/inode.c

748

pr_warn("aops:%ps invalid inode:%px\n", a_ops, host);

fs/inode.c

753

pr_warn("aops:%ps ino:%lx\n", a_ops, ino);

fs/inode.c

760

pr_warn("aops:%ps ino:%lx invalid dentry:%px\n",

fs/inode.c

771

pr_warn("aops:%ps ino:%lx dentry name(?):\"%s\"\n",

fs/iomap/swapfile.c

183

pr_warn("swapon: Cannot find a single usable page in file.\n");

fs/jbd2/journal.c

2080

pr_warn("JBD2: journal recovery failed\n");

fs/jbd2/journal.c

2101

pr_warn("JBD2: journal reset failed\n");

fs/jffs2/background.c

47

pr_warn("fork failed for JFFS2 garbage collect thread: %pe\n",

fs/jffs2/compr.c

193

pr_warn("No memory for compressor allocation. (%d bytes)\n",

fs/jffs2/compr.c

283

pr_warn("Decompressor \"%s\" returned %d\n",

fs/jffs2/compr.c

294

pr_warn("compression type 0x%02x not available\n", comprtype);

fs/jffs2/compr.c

306

pr_warn("NULL compressor name at registering JFFS2 compressor. Failed.\n");

fs/jffs2/compr.c

347

pr_warn("Compressor module is in use. Unregister failed.\n");

fs/jffs2/compr.c

84

pr_warn("No memory for compressor allocation. Compression failed.\n");

fs/jffs2/compr_zlib.c

175

pr_warn("inflateInit failed\n");

fs/jffs2/compr_zlib.c

84

pr_warn("deflateInit failed\n");

fs/jffs2/debug.c

269

pr_warn("%s_size mismatch counted 0x%x, c->%s_size 0x%x\n", \

fs/jffs2/debug.c

286

pr_warn("%s counted only 0x%x blocks of 0x%x. Where are the others?\n",

fs/jffs2/debug.h

84

pr_warn("warning: (%d) %s: " fmt, \

fs/jffs2/dir.c

116

pr_warn("iget() failed for ino #%u\n", ino);

fs/jffs2/dir.c

361

pr_warn("Can't allocate %d bytes of memory\n", targetlen + 1);

fs/jffs2/erase.c

342

pr_warn("Newly-erased block contained word 0x%lx at offset 0x%08x\n",

fs/jffs2/erase.c

351

pr_warn("Failed to allocate page buffer for verifying erase at 0x%08x. Refiling\n",

fs/jffs2/erase.c

366

pr_warn("Read of newly-erased block at 0x%08x failed: %d. Putting on bad_list\n",

fs/jffs2/erase.c

372

pr_warn("Short read from newly-erased block at 0x%08x. Wanted %d, got %zd\n",

fs/jffs2/erase.c

382

pr_warn("Newly-erased block contained word 0x%lx at offset 0x%08x\n",

fs/jffs2/erase.c

440

pr_warn("Write clean marker to block at 0x%08x failed: %d\n",

fs/jffs2/erase.c

443

pr_warn("Short write to newly-erased block at 0x%08x: Wanted %zd, got %zd\n",

fs/jffs2/erase.c

48

pr_warn("kzalloc for struct erase_info in jffs2_erase_block failed. Refiling block for later\n");

fs/jffs2/erase.c

90

pr_warn("Erase at 0x%08x failed immediately: -EROFS. Is the sector locked?\n",

fs/jffs2/erase.c

93

pr_warn("Erase at 0x%08x failed immediately: errno %d\n",

fs/jffs2/fs.c

354

pr_warn("%s(): Bogus i_mode %o for ino %lu\n",

fs/jffs2/gc.c

1005

pr_warn("Deletion dirent \"%s\" not found in list for ino #%u\n",

fs/jffs2/gc.c

102

pr_warn("Eep. ret->gc_node for block at 0x%08x is NULL\n",

fs/jffs2/gc.c

1035

pr_warn("Node read failed in jffs2_garbage_collect_hole. Ret %d, retlen %zd. Data will be lost by writing new hole node\n",

fs/jffs2/gc.c

1040

pr_warn("%s(): Node at 0x%08x had node type 0x%04x instead of JFFS2_NODETYPE_INODE(0x%04x)\n",

fs/jffs2/gc.c

1046

pr_warn("%s(): Node at 0x%08x had totlen 0x%x instead of expected 0x%zx\n",

fs/jffs2/gc.c

1053

pr_warn("%s: Node at 0x%08x had CRC 0x%08x which doesn't match calculated CRC 0x%08x\n",

fs/jffs2/gc.c

1057

pr_warn("Data in the range 0x%08x to 0x%08x of inode #%u will be lost\n",

fs/jffs2/gc.c

1062

pr_warn("%s(): Node 0x%08x wasn't a hole node!\n",

fs/jffs2/gc.c

1064

pr_warn("Data in the range 0x%08x to 0x%08x of inode #%u will be lost\n",

fs/jffs2/gc.c

1104

pr_warn("jffs2_reserve_space_gc of %zd bytes for garbage_collect_hole failed: %d\n",

fs/jffs2/gc.c

1111

pr_warn("Error writing new hole node: %ld\n", PTR_ERR(new_fn));

fs/jffs2/gc.c

1131

pr_warn("%s(): Replacing fn with %d frag(s) but new ver %d != highest_version %d of ino #%d\n",

fs/jffs2/gc.c

1150

pr_warn("%s(): Old node still has frags!\n", __func__);

fs/jffs2/gc.c

1154

pr_warn("%s(): New node has no frags!\n", __func__);

fs/jffs2/gc.c

1332

pr_warn("read_cache_folio() returned error: %ld\n",

fs/jffs2/gc.c

1351

pr_warn("jffs2_reserve_space_gc of %zd bytes for garbage_collect_dnode failed: %d\n",

fs/jffs2/gc.c

1389

pr_warn("Error writing new dnode: %ld\n",

fs/jffs2/gc.c

206

pr_warn("Inode #%u is in state %d during CRC check phase!\n",

fs/jffs2/gc.c

239

pr_warn("Returned error for crccheck of ino #%u. Expect badness...\n",

fs/jffs2/gc.c

298

pr_warn("eep. End of raw list while still supposedly nodes to GC\n");

fs/jffs2/gc.c

299

pr_warn("erase block at 0x%08x. free_size 0x%08x, dirty_size 0x%08x, used_size 0x%08x\n",

fs/jffs2/gc.c

576

pr_warn("Raw node at 0x%08x wasn't in node lists for ino #%u\n",

fs/jffs2/gc.c

579

pr_warn("But it's obsolete so we don't mind too much\n");

fs/jffs2/gc.c

636

pr_warn("Header CRC failed on REF_PRISTINE node at 0x%08x: Read 0x%08x, calculated 0x%08x\n",

fs/jffs2/gc.c

645

pr_warn("Node CRC failed on REF_PRISTINE data node at 0x%08x: Read 0x%08x, calculated 0x%08x\n",

fs/jffs2/gc.c

654

pr_warn("Data CRC failed on REF_PRISTINE data node at 0x%08x: Read 0x%08x, calculated 0x%08x\n",

fs/jffs2/gc.c

665

pr_warn("Node CRC failed on REF_PRISTINE dirent node at 0x%08x: Read 0x%08x, calculated 0x%08x\n",

fs/jffs2/gc.c

672

pr_warn("Name in dirent node at 0x%08x contains zeroes\n",

fs/jffs2/gc.c

680

pr_warn("Name CRC failed on REF_PRISTINE dirent node at 0x%08x: Read 0x%08x, calculated 0x%08x\n",

fs/jffs2/gc.c

690

pr_warn("Unknown node type for REF_PRISTINE node at 0x%08x: 0x%04x\n",

fs/jffs2/gc.c

781

pr_warn("kmalloc of mdata failed in jffs2_garbage_collect_metadata()\n");

fs/jffs2/gc.c

786

pr_warn("read of old metadata failed in jffs2_garbage_collect_metadata(): %d\n",

fs/jffs2/gc.c

799

pr_warn("jffs2_reserve_space_gc of %zd bytes for garbage_collect_metadata failed: %d\n",

fs/jffs2/gc.c

837

pr_warn("Error writing new dnode: %ld\n", PTR_ERR(new_fn));

fs/jffs2/gc.c

880

pr_warn("jffs2_reserve_space_gc of %zd bytes for garbage_collect_dirent failed: %d\n",

fs/jffs2/gc.c

887

pr_warn("jffs2_write_dirent in garbage_collect_dirent failed: %ld\n",

fs/jffs2/gc.c

948

pr_warn("%s(): Read error (%d) reading obsolete node at %08x\n",

fs/jffs2/gc.c

954

pr_warn("%s(): Short read (%zd not %u) reading header from obsolete node at %08x\n",

fs/jffs2/nodemgmt.c

464

pr_warn("Eep. Block 0x%08x taken from free_list had free_size of 0x%08x!!\n",

fs/jffs2/nodemgmt.c

524

pr_warn("argh. node added in wrong place at 0x%08x(%d)\n",

fs/jffs2/nodemgmt.c

527

pr_warn("nextblock 0x%08x", c->nextblock->offset);

fs/jffs2/nodemgmt.c

529

pr_warn("No nextblock");

fs/jffs2/nodemgmt.c

767

pr_warn("Read error reading from obsoleted node at 0x%08x: %d\n",

fs/jffs2/nodemgmt.c

772

pr_warn("Short read from obsoleted node at 0x%08x: %zd\n",

fs/jffs2/nodemgmt.c

777

pr_warn("Node totlen on flash (0x%08x) != totlen from node ref (0x%08x)\n",

fs/jffs2/nodemgmt.c

790

pr_warn("Write error in obliterating obsoleted node at 0x%08x: %d\n",

fs/jffs2/nodemgmt.c

795

pr_warn("Short write in obliterating obsoleted node at 0x%08x: %zd\n",

fs/jffs2/read.c

125

pr_warn("Data CRC %08x != calculated CRC %08x for node at %08x\n",

fs/jffs2/read.c

137

pr_warn("Error: jffs2_decompress returned %d\n", ret);

fs/jffs2/read.c

41

pr_warn("Error reading node from 0x%08x: %d\n",

fs/jffs2/read.c

47

pr_warn("Short read from 0x%08x: wanted 0x%zx bytes, got 0x%zx\n",

fs/jffs2/read.c

58

pr_warn("Node CRC %08x != calculated CRC %08x for node at %08x\n",

fs/jffs2/read.c

72

pr_warn("jffs2_read_dnode() asked for %d bytes at %d from %d-byte node\n",

fs/jffs2/scan.c

237

pr_warn("%s(): unknown block state\n", __func__);

fs/jffs2/scan.c

629

pr_warn("Eep. ofs 0x%08x not word-aligned!\n", ofs);

fs/jffs2/scan.c

634

pr_warn("ofs 0x%08x has already been seen. Skipping\n",

fs/jffs2/scan.c

679

pr_warn("Empty flash at 0x%08x ends at 0x%08x\n",

fs/jffs2/scan.c

727

pr_warn("Magic bitmask is backwards at offset 0x%08x. Wrong endian filesystem?\n",

fs/jffs2/scan.c

742

pr_warn("Old JFFS2 bitmask found at 0x%08x\n", ofs);

fs/jffs2/scan.c

743

pr_warn("You cannot use older JFFS2 filesystems with newer kernels\n");

fs/jffs2/scan.c

782

pr_warn("Node at 0x%08x with length 0x%08x would run over the end of the erase block\n",

fs/jffs2/scan.c

784

pr_warn("Perhaps the file system was created with the wrong erase size?\n");

fs/jffs2/wbuf.c

1141

pr_warn("marking eraseblock at %08x as bad\n", bad_offset);

fs/jffs2/wbuf.c

1264

pr_warn("flash size adjusted to %dKiB\n", c->flash_size);

fs/jffs2/wbuf.c

239

pr_warn("%s(): Read back of page at %08x failed: %d\n",

fs/jffs2/wbuf.c

243

pr_warn("%s(): Read back of page at %08x gave short read: %zd not %d\n",

fs/jffs2/wbuf.c

257

pr_warn("Write verify error (ECC %s) at %08x. Wrote:\n",

fs/jffs2/wbuf.c

262

pr_warn("Read back:\n");

fs/jffs2/wbuf.c

391

pr_warn("Failed to allocate space for wbuf recovery. Data loss ensues.\n");

fs/jffs2/wbuf.c

401

pr_warn("Failed to allocate node refs for wbuf recovery. Data loss ensues.\n");

fs/jffs2/wbuf.c

642

pr_warn("jffs2_flush_wbuf(): Write failed with %d\n", ret);

fs/jffs2/wbuf.c

645

pr_warn("jffs2_flush_wbuf(): Write was short: %zd instead of %d\n",

fs/jffs2/wbuf.c

971

pr_warn("mtd->read(0x%zx bytes from 0x%llx) returned ECC error\n",

fs/jffs2/write.c

427

pr_warn("Eep. We didn't actually write any data in jffs2_write_inode_range()\n");

fs/jffs2/write.c

644

pr_warn("Deleting inode #%u with active dentry \"%s\"->ino #%u\n",

fs/jffs2/write.c

83

pr_warn("%s(): ri->totlen (0x%08x) != sizeof(*ri) (0x%08zx) + datalen (0x%08x)\n",

fs/lockd/host.c

592

pr_warn("lockd: couldn't shutdown host module for net %x!\n",

fs/lockd/svclock.c

1011

pr_warn("lockd: unable to unlock lock rejected by client!\n");

fs/lockd/svcsubs.c

199

pr_warn("lockd: unlock failure in %s:%d\n", __FILE__, __LINE__);

fs/locks.c

224

pr_warn("%s: fl_owner=%p fl_flags=0x%x fl_type=0x%x fl_pid=%u\n",

fs/locks.c

237

pr_warn("Leaked locks on dev=0x%x:0x%x ino=0x%lx:\n",

fs/locks.c

254

pr_warn("Leaked %s lock on dev=0x%x:0x%x ino=0x%lx "

fs/namespace.c

3305

pr_warn("%s filesystem being %s at %s supports timestamps until %ptTd (0x%llx)\n",

fs/netfs/fscache_cache.c

161

pr_warn("Cache tag %s in use\n", name);

fs/netfs/fscache_io.c

129

pr_warn("%s: cookie state change wait timed out: cookie->state=%u state=%u",

fs/netfs/read_single.c

134

pr_warn("Unexpected single-read source %u\n", subreq->source);

fs/nfs/blocklayout/dev.c

409

pr_warn("pNFS: no device found for volume %*phN\n",

fs/nfs/file.c

585

pr_warn("swap activate: swapfile has holes\n");

fs/nfs/nfs42xdr.c

1044

pr_warn("NFS: %s: nsvr %d > Supported. Use first servers\n",

fs/nfs/nfs4state.c

1416

pr_warn("NFSv4: state recovery failed for open file %pd2, "

fs/nfs/nfs4state.c

1874

pr_warn("NFS: %s: lost %d locks\n",

fs/nfs/nfs4state.c

1892

pr_warn("NFS: %s: lost %d locks\n",

fs/nfs/nfs4state.c

2298

pr_warn("NFS: %s unhandled error %d. Exiting with error EIO\n",

fs/nfs/sysfs.c

346

pr_warn("NFS: can't create link to %s in sysfs (%d)\n",

fs/nfs/sysfs.c

380

pr_warn("NFS: sysfs_create_file_ns for server-%d failed (%d)\n",

fs/nfs/sysfs.c

386

pr_warn("NFS: sysfs_create_file_ns for server-%d failed (%d)\n",

fs/nfs/sysfs.c

413

pr_warn("NFS: sysfs_create_file_ns for server-%d failed (%d)\n",

fs/nfs/sysfs.c

429

pr_warn("NFS: nfs sysfs add server-%d failed (%d)\n",

fs/nfs/sysfs.c

436

pr_warn("NFS: sysfs_create_file_ns for server-%d failed (%d)\n",

fs/nfs/sysfs.c

451

pr_warn("NFS: rename sysfs %s failed (%d)\n",

fs/nfs/sysfs.c

466

pr_warn("NFS: rename sysfs %s failed (%d)\n",

fs/nfsd/nfs4proc.c

660

pr_warn("nfsd4_process_open2 failed to open newly-created file: status=%u\n",

fs/nfsd/nfs4recover.c

1471

pr_warn("NFSD: nfsdcld GetVersion upcall failed. Please upgrade nfsdcld.\n");

fs/nfsd/nfs4recover.c

1476

pr_warn("NFSD: nfsdcld GraceStart upcall failed. Please upgrade nfsdcld.\n");

fs/nfsd/nfs4recover.c

1728

pr_warn("NFSD: attempt to initialize umh client tracking in a container ignored.\n");

fs/nfsd/nfs4recover.c

1937

pr_warn("NFSD: Unable to initialize client recovery tracking! (%d)\n", status);

fs/nfsd/nfs4recover.c

1938

pr_warn("NFSD: Is nfsdcld running? If not, enable CONFIG_NFSD_LEGACY_CLIENT_TRACKING.\n");

fs/nfsd/nfs4recover.c

524

pr_warn("NFSD: attempt to initialize legacy client tracking in a container ignored.\n");

fs/nfsd/nfs4xdr.c

5494

pr_warn("nfsd: bad gddrnf_status (%u)\n", gdd->gddrnf_status);

fs/nfsd/nfssvc.c

362

pr_warn("NFSD: Failed to start, no listeners configured.\n");

fs/ntfs3/super.c

1931

pr_warn("ntfs3: Failed to register legacy ntfs filesystem driver: %d\n", err);

fs/overlayfs/copy_up.c

183

pr_warn("failed to retrieve lower fileattr (%pd2, err=%i)\n",

fs/overlayfs/copy_up.c

216

pr_warn("failed to retrieve upper fileattr (%pd2, err=%i)\n",

fs/overlayfs/copy_up.c

27

pr_warn("\"check_copy_up\" module option is obsolete\n");

fs/overlayfs/dir.c

111

pr_warn("Failed to link whiteout - disabling whiteout inode sharing(nlink=%u, err=%u)\n",

fs/overlayfs/super.c

1422

pr_warn("xino not supported on 32bit kernel, falling back to xino=off.\n");

fs/overlayfs/super.c

1495

pr_warn("NFS export requires an index dir, falling back to nfs_export=off.\n");

fs/overlayfs/super.c

1501

pr_warn("NFS export is not supported with metadata only copy up, falling back to nfs_export=off.\n");

fs/overlayfs/super.c

392

pr_warn("failed to create directory %s/%s (errno: %i); mounting read-only\n",

fs/overlayfs/super.c

432

pr_warn("fs on '%s' does not support file handles, falling back to index=off,nfs_export=off.\n",

fs/overlayfs/super.c

443

pr_warn("fs on '%s' does not support file handles, falling back to xino=off.\n",

fs/overlayfs/super.c

499

pr_warn("%s is in-use as upperdir/workdir of another mount, accessing files from both mounts will result in undefined behavior.\n",

fs/overlayfs/super.c

705

pr_warn("upper fs needs to support d_type.\n");

fs/overlayfs/super.c

713

pr_warn("upper fs does not support tmpfile.\n");

fs/overlayfs/super.c

723

pr_warn("upper fs does not support RENAME_WHITEOUT.\n");

fs/overlayfs/super.c

730

pr_warn("failed to set xattr on upper\n");

fs/overlayfs/super.c

734

pr_warn("...falling back to redirect_dir=nofollow.\n");

fs/overlayfs/super.c

738

pr_warn("...falling back to metacopy=off.\n");

fs/overlayfs/super.c

742

pr_warn("...falling back to index=off.\n");

fs/overlayfs/super.c

746

pr_warn("...falling back to uuid=null.\n");

fs/overlayfs/super.c

754

pr_warn("...falling back to xino=off.\n");

fs/overlayfs/super.c

791

pr_warn("upper fs does not support file handles, falling back to index=off.\n");

fs/overlayfs/super.c

801

pr_warn("NFS export requires \"index=on\", falling back to nfs_export=off.\n");

fs/overlayfs/super.c

907

pr_warn("try deleting index dir or mounting with '-o index=off' to disable inodes index.\n");

fs/overlayfs/super.c

979

pr_warn("%s uuid in non-single lower fs '%pd2', falling back to xino=%s,index=off,nfs_export=off.\n",

fs/overlayfs/util.c

843

pr_warn("failed to %s uuid (%pd2, err=%i); falling back to uuid=null.\n",

fs/overlayfs/util.c

901

pr_warn("cannot set %s xattr on upper\n", ovl_xattr(ofs, ox));

fs/proc/vmcore.c

1236

pr_warn("Warning: Core image elf header is not sane\n");

fs/proc/vmcore.c

1292

pr_warn("Warning: Core image elf header is not sane\n");

fs/proc/vmcore.c

1335

pr_warn("Warning: Core image elf header not found\n");

fs/proc/vmcore.c

1348

pr_warn("Warning: Core image elf header is not sane\n");

fs/proc/vmcore.c

1730

pr_warn("not initialized\n");

fs/proc/vmcore.c

768

pr_warn("Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x%x, n_descsz=0x%x\n",

fs/proc/vmcore.c

778

pr_warn("Warning: Zero PT_NOTE entries found\n");

fs/proc/vmcore.c

959

pr_warn("Warning: Exceeded p_memsz, dropping PT_NOTE entry n_namesz=0x%x, n_descsz=0x%x\n",

fs/proc/vmcore.c

969

pr_warn("Warning: Zero PT_NOTE entries found\n");

fs/pstore/platform.c

471

pr_warn("backend '%s' already in use: ignoring '%s'\n",

fs/pstore/platform.c

478

pr_warn("backend '%s' must support at least one frontend\n",

fs/pstore/platform.c

485

pr_warn("backend '%s' must implement read() and write()\n",

fs/pstore/platform.c

496

pr_warn("backend '%s' already loaded: ignoring '%s'\n",

fs/pstore/platform.c

596

pr_warn("ignored compressed record type %d\n", record->type);

fs/pstore/platform.c

602

pr_warn("no decompression method initialized!\n");

fs/pstore/platform.c

719

pr_warn("zlib_inflateEnd() failed\n");

fs/pstore/platform.c

724

pr_warn("failed to create %d record(s) from '%s'\n",

fs/pstore/ram_core.c

531

pr_warn("ECC failed %s\n", prz->label);

fs/pstore/zone.c

1306

pr_warn("total_size must be >= 4096\n");

fs/pstore/zone.c

1310

pr_warn("capping size to 128MiB\n");

fs/pstore/zone.c

1316

pr_warn("at least one record size must be non-zero\n");

fs/pstore/zone.c

1355

pr_warn("'%s' already loaded: ignoring '%s'\n",

fs/resctrl/monitor.c

1001

pr_warn("Event %d may not be floating point\n", eventid);

fs/resctrl/monitor.c

997

pr_warn("Duplicate enable for event %d\n", eventid);

fs/resctrl/rdtgroup.c

2144

pr_warn("Failed to add %s, err=%d\n", rft->name, ret);

fs/smb/client/file.c

3275

pr_warn("swap activate: swapfile has holes\n");

fs/smb/client/file.c

816

pr_warn("Serverclose failed %d times, giving up\n", MAX_RETRIES);

fs/smb/client/fs_context.c

1563

pr_warn("username too long\n");

fs/smb/client/fs_context.c

1598

pr_warn("domain name too long\n");

fs/smb/client/fs_context.c

1610

pr_warn("Could not parse srcaddr: %s\n",

fs/smb/client/fs_context.c

1617

pr_warn("iocharset name too long\n");

fs/smb/client/fs_context.c

1648

pr_warn("netbiosname longer than 15 truncated\n");

fs/smb/client/fs_context.c

1668

pr_warn("server netbiosname longer than 15 truncated\n");

fs/smb/client/fs_context.c

1679

pr_warn("Bad mount helper ver=%s. Did you want SMB1 (CIFS) dialect and mean to type vers=1.0 instead?\n",

fs/smb/client/fs_context.c

1687

pr_warn("Invalid mount helper version specified\n");

fs/smb/client/fs_context.c

1818

pr_warn("Mount option noac not supported. Instead set /proc/fs/cifs/LookupCacheEnabled to 0\n");

fs/smb/client/inode.c

807

pr_warn("Unexpected type %u", wire_type);

fs/smb/client/smb2misc.c

275

pr_warn("Server response too short: calculated length "

fs/squashfs/squashfs.h

15

#define WARNING(s, args...) pr_warn("SQUASHFS: "s, ## args)

fs/super.c

1149

pr_warn("Emergency Thaw on %pg\n", sb->s_bdev);

fs/sysfs/dir.c

29

pr_warn("cannot create duplicate filename '%s/%s'\n", buf, name);

fs/ubifs/misc.c

52

pr_warn("UBIFS warning (ubi%d:%d pid %d): %ps: %pV\n",

fs/udf/super.c

2359

pr_warn("warning (device %s): %s: %pV", sb->s_id, function, &vaf);

fs/udf/super.c

926

pr_warn("incorrect volume identification, setting to "

fs/udf/unicode.c

364

pr_warn("incorrect dstring lengths (%d/%d),"

fs/ufs/super.c

340

pr_warn("(device %s): %s: %pV\n",

fs/userfaultfd.c

435

pr_warn("FAULT_FLAG_ALLOW_RETRY missing %x\n",

fs/zonefs/zonefs.h

256

pr_warn("zonefs (%s) WARNING: " format, sb->s_id, ## args)

include/linux/ceph/ceph_debug.h

58

pr_warn("[%pU %llu]: " fmt, &client->fsid, \

include/linux/ceph/decode.h

346

pr_warn("got struct_v %d struct_compat %d > %d of %s\n",

include/linux/ceph/osdmap.h

236

pr_warn("incomplete pg encoding\n");

include/linux/ceph/osdmap.h

241

pr_warn("do not understand pg encoding %d > 1\n",

include/linux/device-mapper.h

665

#define DMWARN(fmt, ...) pr_warn(DM_FMT(fmt), ##__VA_ARGS__)

include/linux/fb.h

897

pr_warn("fb%d: " fmt, (fb_info)->node, ##__VA_ARGS__)

include/linux/gfp.h

275

pr_warn("%pGg allocation from offline node %d\n", &gfp_mask, this_node);

include/linux/mlx5/driver.h

1270

pr_warn("gid table length is zero\n");

include/linux/net.h

284

net_ratelimited_function(pr_warn, fmt, ##__VA_ARGS__)

include/linux/pgalloc_tag.h

51

pr_warn("invalid page tag reference %lu\n", (unsigned long)idx);

include/linux/pgalloc_tag.h

57

pr_warn("invalid page tag 0x%lx\n", (unsigned long)tag);

include/linux/ratelimit.h

61

pr_warn("%s: %d output lines suppressed due to ratelimiting\n", current->comm, m);

include/net/pkt_sched.h

290

pr_warn("%s: %s qdisc %X: is non-work-conserving?\n",

include/rv/da_monitor.h

136

pr_warn("rv: " __stringify(MAX_DA_RETRY_RACING_EVENTS)

include/rv/da_monitor.h

177

pr_warn("rv: " __stringify(MAX_DA_RETRY_RACING_EVENTS)

init/do_mounts.c

79

pr_warn("ignoring invalid rootwait value\n");

init/do_mounts.c

84

pr_warn("ignoring excessive rootwait value\n");

init/do_mounts_initrd.c

18

pr_warn("noinitrd option is deprecated and will be removed soon\n");

init/do_mounts_initrd.c

56

pr_warn("using deprecated initrd support, will be removed in January 2027; "

init/do_mounts_rd.c

25

pr_warn("ramdisk_start= option is deprecated and will be removed soon\n");

init/main.c

1298

pr_warn("initcall_blacklist requires CONFIG_KALLSYMS\n");

init/main.c

1539

pr_warn("Invalid option string for rodata: '%s'\n", str);

init/main.c

1562

pr_warn("Kernel memory protection not selected by kernel config.\n");

init/main.c

1564

pr_warn("This architecture does not have kernel memory protection.\n");

init/main.c

1707

pr_warn("check access for rdinit=%s failed: %i, ignoring\n",

init/main.c

216

pr_warn("Parameter %s is obsolete, ignored\n",

init/main.c

490

pr_warn("WARNING: 'bootconfig' found on the kernel command line but CONFIG_BOOT_CONFIG is not set.\n");

init/main.c

772

pr_warn("Malformed early option '%s'\n", param);

init/version.c

28

pr_warn("hostname parameter exceeds %zd characters and will be truncated",

ipc/ipc_sysctl.c

318

pr_warn("ipc sysctl registration failed\n");

ipc/mqueue.c

1654

pr_warn("sysctl registration failed\n");

kernel/audit.c

1949

pr_warn("audit_backlog=%d > audit_backlog_limit=%d\n",

kernel/audit.c

416

pr_warn("audit_lost=%u audit_rate_limit=%u audit_backlog_limit=%u\n",

kernel/auditfilter.c

537

pr_warn("audit rule for LSM \'%s\' is invalid\n",

kernel/auditfilter.c

806

pr_warn("audit rule for LSM \'%s\' is invalid\n",

kernel/auditsc.c

2080

pr_warn("out of memory, audit has lost a tree reference\n");

kernel/auditsc.c

2139

pr_warn("out of memory, audit has lost a tree reference\n");

kernel/bpf/bpf_struct_ops.c

108

pr_warn("The first member of %s should be bpf_struct_ops_common_value\n",

kernel/bpf/bpf_struct_ops.c

115

pr_warn("The second member of %s should be %s\n",

kernel/bpf/bpf_struct_ops.c

191

pr_warn("Cannot find the stub function name for the %s in struct %s\n",

kernel/bpf/bpf_struct_ops.c

198

pr_warn("Cannot find the stub function %s in btf\n", stub_fname);

kernel/bpf/bpf_struct_ops.c

210

pr_warn("the number of arguments of the stub function %s does not match the number of arguments of the member %s of struct %s\n",

kernel/bpf/bpf_struct_ops.c

249

pr_warn("stub function %s has %s tagging to an unsupported type\n",

kernel/bpf/bpf_struct_ops.c

256

pr_warn("stub function %s has an invalid trampoline ctx offset for arg#%u\n",

kernel/bpf/bpf_struct_ops.c

262

pr_warn("arg#%u type in stub function %s does not match with its original func_proto\n",

kernel/bpf/bpf_struct_ops.c

346

pr_warn("struct_ops name %s is too long\n",

kernel/bpf/bpf_struct_ops.c

353

pr_warn("struct_ops for %s has no cfi_stubs\n", st_ops->name);

kernel/bpf/bpf_struct_ops.c

360

pr_warn("Cannot find struct %s in %s\n",

kernel/bpf/bpf_struct_ops.c

366

pr_warn("Cannot support #%u members in struct %s\n",

kernel/bpf/bpf_struct_ops.c

374

pr_warn("Cannot find struct %s in %s\n",

kernel/bpf/bpf_struct_ops.c

399

pr_warn("anon member in struct %s is not supported\n",

kernel/bpf/bpf_struct_ops.c

406

pr_warn("bit field member %s in struct %s is not supported\n",

kernel/bpf/bpf_struct_ops.c

413

pr_warn("'struct module' btf id not found. Is CONFIG_MODULES enabled? bpf_struct_ops '%s' needs module support.\n",

kernel/bpf/bpf_struct_ops.c

432

pr_warn("func ptr %s in struct %s returns non-struct pointer, which is not supported\n",

kernel/bpf/bpf_struct_ops.c

442

pr_warn("Error in parsing func ptr %s in struct %s\n",

kernel/bpf/bpf_struct_ops.c

457

pr_warn("Error in init bpf_struct_ops %s\n",

kernel/bpf/bpf_struct_ops.c

99

pr_warn("The number of %s's members should be 2, but we get %d\n",

kernel/bpf/btf.c

8328

pr_warn("failed to validate module [%s] BTF: %ld\n",

kernel/bpf/btf.c

8366

pr_warn("failed to register module [%s] BTF in sysfs: %d\n",

kernel/bpf/btf.c

8497

pr_warn("missing module BTF, cannot register %s\n", feature);

kernel/bpf/core.c

2317

pr_warn("BPF interpreter: unknown opcode %02x (imm: 0x%x)\n",

kernel/cgroup/cgroup-v1.c

1108

pr_warn("option changes via remount are deprecated (pid=%d comm=%s)\n",

kernel/cgroup/cgroup-v1.c

1222

pr_warn("new mount options do not match the existing superblock, will be ignored\n");

kernel/cgroup/cgroup.c

1947

pr_warn("partial failure to rebind %s controller (err=%d)\n",

kernel/cgroup/cgroup.c

2552

pr_warn("cgroup: Unexpected attach lock mode.");

kernel/cgroup/cgroup.c

2575

pr_warn("cgroup: Unexpected attach lock mode.");

kernel/cgroup/cgroup.c

4476

pr_warn("%s: failed to add %s, err=%d\n",

kernel/cgroup/rdma.c

176

pr_warn("Invalid device %p or rdma cgroup %p\n", cg, device);

kernel/cpu.c

1974

pr_warn("Error taking CPU%d up: %d\n", cpu, error);

kernel/cpu.c

977

pr_warn("CPU %u %s state %s (%d) failed (%d)\n",

kernel/crash_core.c

502

pr_warn("Memory allocation for saving cpu register states failed\n");

kernel/crash_core.c

72

pr_warn("Could not allocate vmcoreinfo buffer\n");

kernel/crash_core.c

80

pr_warn("Could not vmap vmcoreinfo buffer\n");

kernel/crash_dump_dm_crypt.c

152

pr_warn("No such logon key %s\n", dm_key->key_desc);

kernel/crash_dump_dm_crypt.c

384

pr_warn("No key description for key %s\n", item->ci_name);

kernel/crash_reserve.c

100

pr_warn("crashkernel: end <= start\n");

kernel/crash_reserve.c

106

pr_warn("crashkernel: ':' expected\n");

kernel/crash_reserve.c

113

pr_warn("crashkernel: Memory value expected\n");

kernel/crash_reserve.c

118

pr_warn("crashkernel: invalid size\n");

kernel/crash_reserve.c

136

pr_warn("crashkernel: Memory value expected after '@'\n");

kernel/crash_reserve.c

161

pr_warn("crashkernel: memory value expected\n");

kernel/crash_reserve.c

168

pr_warn("crashkernel: unrecognized char: %c\n", *cur);

kernel/crash_reserve.c

201

pr_warn("crashkernel: memory value expected\n");

kernel/crash_reserve.c

207

pr_warn("crashkernel: unrecognized char: %c\n", *cur);

kernel/crash_reserve.c

212

pr_warn("crashkernel: unrecognized char: %c\n", *cur);

kernel/crash_reserve.c

419

pr_warn("crashkernel reservation failed - memory is in use.\n");

kernel/crash_reserve.c

445

pr_warn("cannot allocate crashkernel (size:0x%llx)\n",

kernel/crash_reserve.c

509

pr_warn("crashkernel CMA reservation failed: %lld MB requested, %lld MB reserved in %d ranges\n",

kernel/crash_reserve.c

520

pr_warn("crashkernel CMA reservation not supported\n");

kernel/crash_reserve.c

81

pr_warn("crashkernel: Memory value expected\n");

kernel/crash_reserve.c

86

pr_warn("crashkernel: '-' expected\n");

kernel/crash_reserve.c

95

pr_warn("crashkernel: Memory value expected\n");

kernel/dma/contiguous.c

180

pr_warn("invalid node %d specified\n", nid);

kernel/dma/contiguous.c

191

pr_warn("%s: reservation failed: err %d, node %d", __func__,

kernel/dma/contiguous.c

202

pr_warn("%s: reservation failed: err %d, node %d", __func__,

kernel/dma/contiguous.c

269

pr_warn("Couldn't register default CMA heap.");

kernel/dma/contiguous.c

511

pr_warn("Couldn't register CMA heap.");

kernel/dma/debug.c

175

pr_warn("Mapped at:\n");

kernel/dma/debug.c

937

pr_warn("%d debug entries requested but only %d allocated\n",

kernel/dma/swiotlb.c

233

pr_warn("No low mem\n");

kernel/dma/swiotlb.c

335

pr_warn("%s: Failed to allocate %zu bytes tlb structure\n",

kernel/dma/swiotlb.c

342

pr_warn("%s: Failed to remap %zu bytes\n", __func__, bytes);

kernel/dma/swiotlb.c

400

pr_warn("%s: Failed to allocate %zu bytes align=0x%lx\n",

kernel/dma/swiotlb.c

408

pr_warn("%s: Failed to allocate mem->areas.\n", __func__);

kernel/dma/swiotlb.c

492

pr_warn("only able to allocate %ld MB\n",

kernel/events/uprobes.c

124

pr_warn("uprobe: %s:%d failed to %s\n", t->comm, t->pid, msg);

kernel/events/uprobes.c

330

pr_warn("ref_ctr going negative. vaddr: 0x%lx, "

kernel/events/uprobes.c

347

pr_warn("ref_ctr %s failed for inode: 0x%lx offset: "

kernel/events/uprobes.c

985

pr_warn("ref_ctr_offset mismatch. inode: 0x%lx offset: 0x%llx "

kernel/gcov/fs.c

568

pr_warn("out of memory\n");

kernel/gcov/fs.c

735

pr_warn("could not add '%s' (out of memory)\n",

kernel/gcov/fs.c

749

pr_warn("discarding saved data for %s "

kernel/gcov/fs.c

761

pr_warn("could not add '%s' (incompatible "

kernel/gcov/fs.c

79

pr_warn("invalid gcov_persist parameter '%s'\n", str);

kernel/gcov/fs.c

797

pr_warn("could not save data for '%s' "

kernel/gcov/fs.c

814

pr_warn("could not remove '%s' (not found)\n",

kernel/gcov/fs.c

854

pr_warn("could not remove '%s' (not found)\n",

kernel/irq/cpuhotplug.c

45

pr_warn("Eff. affinity %*pbl of IRQ %u contains only offline CPUs after offlining CPU %u\n",

kernel/irq/ipi.c

130

pr_warn("Trying to destroy a non IPI domain!\n");

kernel/irq/ipi.c

31

pr_warn("Reservation on a non IPI domain\n");

kernel/irq/ipi.c

36

pr_warn("Reservation is not in possible_cpu_mask\n");

kernel/irq/ipi.c

42

pr_warn("Reservation for empty destination mask\n");

kernel/irq/ipi.c

73

pr_warn("Destination mask has holes\n");

kernel/irq/ipi.c

80

pr_warn("Can't reserve IPI, failed to alloc descs\n");

kernel/irq/ipi.c

88

pr_warn("Can't reserve IPI, failed to alloc hw irqs\n");

kernel/irq/irqdesc.c

368

pr_warn("Failed to add kobject for irq %d\n", irq);

kernel/irq/irqdomain.c

921

pr_warn("no irq domain found for %s !\n",

kernel/irq/irqdomain.c

967

pr_warn("type mismatch, failed to map hwirq-%lu for %s!\n",

kernel/irq/manage.c

1784

pr_warn("irq %d uses trigger mode %u; requested %u\n",

kernel/irq/matrix.c

355

pr_warn("Interrupt reservation exceeds available resources\n");

kernel/irq/spurious.c

397

pr_warn("irqfixup boot option not supported with PREEMPT_RT\n");

kernel/irq/spurious.c

401

pr_warn("Misrouted IRQ fixup support enabled.\n");

kernel/irq/spurious.c

402

pr_warn("This may impact system performance.\n");

kernel/irq/spurious.c

411

pr_warn("irqpoll boot option not supported with PREEMPT_RT\n");

kernel/irq/spurious.c

415

pr_warn("Misrouted IRQ fixup and polling support enabled\n");

kernel/irq/spurious.c

416

pr_warn("This may significantly impact system performance\n");

kernel/kcsan/core.c

816

pr_warn("non-strict mode configured - use CONFIG_KCSAN_STRICT=y to see all data races\n");

kernel/kprobes.c

2967

pr_warn("Kprobes globally enabled, but failed to enable %d out of %d probes. Please check which kprobes are kept disabled via debugfs.\n",

kernel/kprobes.c

3006

pr_warn("Kprobes globally disabled, but failed to disable %d out of %d probes. Please check which kprobes are kept enabled via debugfs.\n",

kernel/kstack_erase.c

44

pr_warn("stackleak: kernel stack erasing is %s\n",

kernel/livepatch/core.c

1070

pr_warn("pre-patch callback failed for object '%s'\n",

kernel/livepatch/core.c

1077

pr_warn("failed to patch object '%s'\n",

kernel/livepatch/core.c

1089

pr_warn("failed to enable patch '%s'\n", patch->mod->name);

kernel/livepatch/core.c

1132

pr_warn("This architecture doesn't have support for the livepatch consistency model.\n");

kernel/livepatch/core.c

1133

pr_warn("The livepatch transition may never complete.\n");

kernel/livepatch/core.c

1290

pr_warn("failed to initialize patch '%s' for module '%s' (%d)\n",

kernel/livepatch/core.c

1300

pr_warn("pre-patch callback failed for object '%s'\n",

kernel/livepatch/core.c

1307

pr_warn("failed to apply patch '%s' to module '%s' (%d)\n",

kernel/livepatch/core.c

1330

pr_warn("patch '%s' failed for module '%s', refusing to load module '%s'\n",

kernel/livepatch/transition.c

712

pr_warn("forcing remaining tasks to the patched state\n");

kernel/liveupdate/kexec_handover.c

1472

pr_warn("setup: failed to memremap FDT (0x%llx)\n", fdt_phys);

kernel/liveupdate/kexec_handover.c

1477

pr_warn("setup: handover FDT (0x%llx) is invalid: %d\n",

kernel/liveupdate/kexec_handover.c

1483

pr_warn("setup: handover FDT (0x%llx) is incompatible with '%s': %d\n",

kernel/liveupdate/kexec_handover.c

1494

pr_warn("setup: failed to memremap scratch (phys=0x%llx, len=%lld)\n",

kernel/liveupdate/kexec_handover.c

1511

pr_warn("failed to mark the scratch region 0x%pa+0x%pa: %pe",

kernel/liveupdate/kexec_handover.c

1543

pr_warn("disabling KHO revival\n");

kernel/liveupdate/kexec_handover.c

721

pr_warn("Failed to reserve scratch area, disabling kexec handover\n");

kernel/liveupdate/kexec_handover_debugfs.c

146

pr_warn("node %s prop fdt has invalid length: %d\n",

kernel/liveupdate/kexec_handover_debugfs.c

153

pr_warn("failed to add fdt %s to debugfs: %pe\n", name,

kernel/liveupdate/luo_core.c

85

pr_warn("Disabling liveupdate because KHO is disabled\n");

kernel/liveupdate/luo_file.c

484

pr_warn("Freeze failed for token[%#0llx] handler[%s] err[%pe]\n",

kernel/liveupdate/luo_file.c

788

pr_warn("No registered handler for compatible '%s'\n",

kernel/liveupdate/luo_session.c

213

pr_warn("Unable to finish session [%s] on release\n",

kernel/liveupdate/luo_session.c

243

pr_warn("The file was successfully preserved, but response to user failed\n");

kernel/liveupdate/luo_session.c

547

pr_warn("Failed to allocate session [%s] during deserialization %pe\n",

kernel/liveupdate/luo_session.c

554

pr_warn("Failed to insert session [%s] %pe\n",

kernel/liveupdate/luo_session.c

565

pr_warn("Failed to deserialize files for session [%s] %pe\n",

kernel/locking/lock_events.c

176

pr_warn("Could not create '%s' debugfs entries\n", LOCK_EVENTS_DIR);

kernel/locking/lockdep.c

1960

pr_warn("\n");

kernel/locking/lockdep.c

1961

pr_warn("======================================================\n");

kernel/locking/lockdep.c

1962

pr_warn("WARNING: possible circular locking dependency detected\n");

kernel/locking/lockdep.c

1964

pr_warn("------------------------------------------------------\n");

kernel/locking/lockdep.c

1965

pr_warn("%s/%d is trying to acquire lock:\n",

kernel/locking/lockdep.c

1969

pr_warn("\nbut task is already holding lock:\n");

kernel/locking/lockdep.c

1972

pr_warn("\nwhich lock already depends on the new lock.\n\n");

kernel/locking/lockdep.c

1973

pr_warn("\nthe existing dependency chain (in reverse order) is:\n");

kernel/locking/lockdep.c

2057

pr_warn("Increase LOCKDEP_CIRCULAR_QUEUE_BITS to avoid this warning:\n");

kernel/locking/lockdep.c

2563

pr_warn("\n");

kernel/locking/lockdep.c

2564

pr_warn("=====================================================\n");

kernel/locking/lockdep.c

2565

pr_warn("WARNING: %s-safe -> %s-unsafe lock order detected\n",

kernel/locking/lockdep.c

2568

pr_warn("-----------------------------------------------------\n");

kernel/locking/lockdep.c

2569

pr_warn("%s/%d [HC%u[%lu]:SC%u[%lu]:HE%u:SE%u] is trying to acquire:\n",

kernel/locking/lockdep.c

2577

pr_warn("\nand this task is already holding:\n");

kernel/locking/lockdep.c

2579

pr_warn("which would create a new lock dependency:\n");

kernel/locking/lockdep.c

2585

pr_warn("\nbut this new dependency connects a %s-irq-safe lock:\n",

kernel/locking/lockdep.c

2588

pr_warn("\n... which became %s-irq-safe at:\n", irqclass);

kernel/locking/lockdep.c

2592

pr_warn("\nto a %s-irq-unsafe lock:\n", irqclass);

kernel/locking/lockdep.c

2594

pr_warn("\n... which became %s-irq-unsafe at:\n", irqclass);

kernel/locking/lockdep.c

2595

pr_warn("...");

kernel/locking/lockdep.c

2599

pr_warn("\nother info that might help us debug this:\n\n");

kernel/locking/lockdep.c

2605

pr_warn("\nthe dependencies between %s-irq-safe lock and the holding lock:\n", irqclass);

kernel/locking/lockdep.c

2608

pr_warn("\nthe dependencies between the lock to be acquired");

kernel/locking/lockdep.c

2609

pr_warn(" and %s-irq-unsafe lock:\n", irqclass);

kernel/locking/lockdep.c

2615

pr_warn("\nstack backtrace:\n");

kernel/locking/lockdep.c

3020

pr_warn("\n");

kernel/locking/lockdep.c

3021

pr_warn("============================================\n");

kernel/locking/lockdep.c

3022

pr_warn("WARNING: possible recursive locking detected\n");

kernel/locking/lockdep.c

3024

pr_warn("--------------------------------------------\n");

kernel/locking/lockdep.c

3025

pr_warn("%s/%d is trying to acquire lock:\n",

kernel/locking/lockdep.c

3028

pr_warn("\nbut task is already holding lock:\n");

kernel/locking/lockdep.c

3032

pr_warn("and the lock comparison function returns %i:\n",

kernel/locking/lockdep.c

3036

pr_warn("\nother info that might help us debug this:\n");

kernel/locking/lockdep.c

3040

pr_warn("\nstack backtrace:\n");

kernel/locking/lockdep.c

3643

pr_warn("\n");

kernel/locking/lockdep.c

3644

pr_warn("============================\n");

kernel/locking/lockdep.c

3645

pr_warn("WARNING: chain_key collision\n");

kernel/locking/lockdep.c

3647

pr_warn("----------------------------\n");

kernel/locking/lockdep.c

3648

pr_warn("%s/%d: ", current->comm, task_pid_nr(current));

kernel/locking/lockdep.c

3649

pr_warn("Hash chain already cached but the contents don't match!\n");

kernel/locking/lockdep.c

3651

pr_warn("Held locks:");

kernel/locking/lockdep.c

3654

pr_warn("Locks in cached chain:");

kernel/locking/lockdep.c

3657

pr_warn("\nstack backtrace:\n");

kernel/locking/lockdep.c

4015

pr_warn("\n");

kernel/locking/lockdep.c

4016

pr_warn("================================\n");

kernel/locking/lockdep.c

4017

pr_warn("WARNING: inconsistent lock state\n");

kernel/locking/lockdep.c

4019

pr_warn("--------------------------------\n");

kernel/locking/lockdep.c

4021

pr_warn("inconsistent {%s} -> {%s} usage.\n",

kernel/locking/lockdep.c

4024

pr_warn("%s/%d [HC%u[%lu]:SC%u[%lu]:HE%u:SE%u] takes:\n",

kernel/locking/lockdep.c

4032

pr_warn("{%s} state was registered at:\n", usage_str[prev_bit]);

kernel/locking/lockdep.c

4036

pr_warn("\nother info that might help us debug this:\n");

kernel/locking/lockdep.c

4041

pr_warn("\nstack backtrace:\n");

kernel/locking/lockdep.c

4081

pr_warn("\n");

kernel/locking/lockdep.c

4082

pr_warn("========================================================\n");

kernel/locking/lockdep.c

4083

pr_warn("WARNING: possible irq lock inversion dependency detected\n");

kernel/locking/lockdep.c

4085

pr_warn("--------------------------------------------------------\n");

kernel/locking/lockdep.c

4086

pr_warn("%s/%d just changed the state of lock:\n",

kernel/locking/lockdep.c

4090

pr_warn("but this lock took another, %s-unsafe lock in the past:\n", irqclass);

kernel/locking/lockdep.c

4092

pr_warn("but this lock was taken by another, %s-safe lock in the past:\n", irqclass);

kernel/locking/lockdep.c

4094

pr_warn("\n\nand interrupts could create inverse lock ordering between them.\n\n");

kernel/locking/lockdep.c

4096

pr_warn("\nother info that might help us debug this:\n");

kernel/locking/lockdep.c

4102

pr_warn("lockdep:%s bad path found in chain graph\n", __func__);

kernel/locking/lockdep.c

4118

pr_warn("\nthe shortest dependencies between 2nd lock and 1st lock:\n");

kernel/locking/lockdep.c

4124

pr_warn("\nstack backtrace:\n");

kernel/locking/lockdep.c

4609

pr_warn("CPU %u left hardirqs enabled!", cpu);

kernel/locking/lockdep.c

4813

pr_warn("\n");

kernel/locking/lockdep.c

4814

pr_warn("=============================\n");

kernel/locking/lockdep.c

4815

pr_warn("[ BUG: Invalid wait context ]\n");

kernel/locking/lockdep.c

4817

pr_warn("-----------------------------\n");

kernel/locking/lockdep.c

4819

pr_warn("%s/%d is trying to lock:\n", curr->comm, task_pid_nr(curr));

kernel/locking/lockdep.c

4822

pr_warn("other info that might help us debug this:\n");

kernel/locking/lockdep.c

4825

pr_warn("context-{%d:%d}\n", curr_inner, curr_inner);

kernel/locking/lockdep.c

4829

pr_warn("stack backtrace:\n");

kernel/locking/lockdep.c

5043

pr_warn("\n");

kernel/locking/lockdep.c

5044

pr_warn("==================================\n");

kernel/locking/lockdep.c

5045

pr_warn("WARNING: Nested lock was not taken\n");

kernel/locking/lockdep.c

5047

pr_warn("----------------------------------\n");

kernel/locking/lockdep.c

5049

pr_warn("%s/%d is trying to lock:\n", curr->comm, task_pid_nr(curr));

kernel/locking/lockdep.c

5052

pr_warn("\nbut this task is not holding:\n");

kernel/locking/lockdep.c

5053

pr_warn("%s\n", hlock->nest_lock->name);

kernel/locking/lockdep.c

5055

pr_warn("\nstack backtrace:\n");

kernel/locking/lockdep.c

5058

pr_warn("\nother info that might help us debug this:\n");

kernel/locking/lockdep.c

5061

pr_warn("\nstack backtrace:\n");

kernel/locking/lockdep.c

5283

pr_warn("\n");

kernel/locking/lockdep.c

5284

pr_warn("=====================================\n");

kernel/locking/lockdep.c

5285

pr_warn("WARNING: bad unlock balance detected!\n");

kernel/locking/lockdep.c

5287

pr_warn("-------------------------------------\n");

kernel/locking/lockdep.c

5288

pr_warn("%s/%d is trying to release lock (",

kernel/locking/lockdep.c

5293

pr_warn("but there are no more locks to release!\n");

kernel/locking/lockdep.c

5294

pr_warn("\nother info that might help us debug this:\n");

kernel/locking/lockdep.c

5297

pr_warn("\nstack backtrace:\n");

kernel/locking/lockdep.c

6015

pr_warn("\n");

kernel/locking/lockdep.c

6016

pr_warn("=================================\n");

kernel/locking/lockdep.c

6017

pr_warn("WARNING: bad contention detected!\n");

kernel/locking/lockdep.c

6019

pr_warn("---------------------------------\n");

kernel/locking/lockdep.c

6020

pr_warn("%s/%d is trying to contend lock (",

kernel/locking/lockdep.c

6025

pr_warn("but there are no locks held!\n");

kernel/locking/lockdep.c

6026

pr_warn("\nother info that might help us debug this:\n");

kernel/locking/lockdep.c

6029

pr_warn("\nstack backtrace:\n");

kernel/locking/lockdep.c

6682

pr_warn("\n");

kernel/locking/lockdep.c

6683

pr_warn("=========================\n");

kernel/locking/lockdep.c

6684

pr_warn("WARNING: held lock freed!\n");

kernel/locking/lockdep.c

6686

pr_warn("-------------------------\n");

kernel/locking/lockdep.c

6687

pr_warn("%s/%d is freeing memory %px-%px, with a lock still held there!\n",

kernel/locking/lockdep.c

6692

pr_warn("\nstack backtrace:\n");

kernel/locking/lockdep.c

6744

pr_warn("\n");

kernel/locking/lockdep.c

6745

pr_warn("====================================\n");

kernel/locking/lockdep.c

6746

pr_warn("WARNING: %s/%d still has locks held!\n",

kernel/locking/lockdep.c

6749

pr_warn("------------------------------------\n");

kernel/locking/lockdep.c

6751

pr_warn("\nstack backtrace:\n");

kernel/locking/lockdep.c

6770

pr_warn("INFO: lockdep is turned off.\n");

kernel/locking/lockdep.c

6773

pr_warn("\nShowing all locks held in the system:\n");

kernel/locking/lockdep.c

6785

pr_warn("\n");

kernel/locking/lockdep.c

6786

pr_warn("=============================================\n\n");

kernel/locking/lockdep.c

6813

pr_warn("\n");

kernel/locking/lockdep.c

6814

pr_warn("================================================\n");

kernel/locking/lockdep.c

6815

pr_warn("WARNING: lock held when returning to user space!\n");

kernel/locking/lockdep.c

6817

pr_warn("------------------------------------------------\n");

kernel/locking/lockdep.c

6818

pr_warn("%s/%d is leaving the kernel with locks still held!\n",

kernel/locking/lockdep.c

6839

pr_warn("\n");

kernel/locking/lockdep.c

6840

pr_warn("=============================\n");

kernel/locking/lockdep.c

6841

pr_warn("WARNING: suspicious RCU usage\n");

kernel/locking/lockdep.c

6843

pr_warn("-----------------------------\n");

kernel/locking/lockdep.c

6844

pr_warn("%s:%d %s!\n", file, line, s);

kernel/locking/lockdep.c

6845

pr_warn("\nother info that might help us debug this:\n\n");

kernel/locking/lockdep.c

6846

pr_warn("\n%srcu_scheduler_active = %d, debug_locks = %d\n%s",

kernel/locking/lockdep.c

6872

pr_warn("RCU used illegally from extended quiescent state!\n");

kernel/locking/lockdep.c

6875

pr_warn("\nstack backtrace:\n");

kernel/locking/locktorture.c

83

pr_warn("%s: %s, all CPUs set\n", kp->name, s);

kernel/module/decompress.c

363

pr_warn("Failed to create 'compression' attribute");

kernel/module/dups.c

186

pr_warn("module-autoload: duplicate request for module %s\n", module_name);

kernel/module/main.c

1082

pr_warn("%s: %s: kernel tainted.\n", mod->name, reason);

kernel/module/main.c

1198

pr_warn(

kernel/module/main.c

1223

pr_warn("%s: module uses symbols %s from proprietary module %s, inheriting taint.\n",

kernel/module/main.c

1298

pr_warn("%s: gave up waiting for init of module %s.\n",

kernel/module/main.c

1450

pr_warn("failing symbol_get of non-GPLONLY symbol %s.\n",

kernel/module/main.c

1536

pr_warn("%s: please compile with -fno-common\n",

kernel/module/main.c

1566

pr_warn("%s: Unknown symbol %s (err %d)\n",

kernel/module/main.c

1756

pr_warn("%s: module license '%s' taints kernel.\n",

kernel/module/main.c

2137

pr_warn("%s: module has no symbols (stripped?)\n",

kernel/module/main.c

2433

pr_warn("%s: loading module not compiled with retpoline compiler.\n",

kernel/module/main.c

2524

pr_warn("%s: loading out-of-tree module taints kernel.\n",

kernel/module/main.c

2533

pr_warn("%s: module is from the staging directory, the quality "

kernel/module/main.c

2547

pr_warn("%s: loading test module taints kernel.\n",

kernel/module/main.c

2576

pr_warn("%s: module license taints kernel.\n", mod->name);

kernel/module/main.c

2629

pr_warn("%s: has both .ctors and .init_array.\n",

kernel/module/main.c

2717

pr_warn("%s: Ignoring obsolete parameters\n", mod->name);

kernel/module/main.c

3051

pr_warn("%s: '%s'->init suspiciously returned %d, it should "

kernel/module/main.c

3089

pr_warn("%s: module_enable_rodata_ro_after_init() returned %d, "

kernel/module/main.c

3203

pr_warn("Could not add fail-tracking for module: %s\n", name);

kernel/module/main.c

3317

pr_warn("%s: unknown parameter '%s' ignored\n", modname, param);

kernel/module/main.c

3492

pr_warn("%s: parameters '%s' after `--' ignored\n",

kernel/module/main.c

466

pr_warn("%s: per-cpu alignment %li > %li\n",

kernel/module/main.c

473

pr_warn("%s: Could not allocate %lu bytes percpu data\n",

kernel/module/version.c

71

pr_warn("%s: disagrees about version of symbol %s\n", info->name, symname);

kernel/padata.c

1125

pr_warn("padata: initialization failed\n");

kernel/panic.c

1012

pr_warn("---[ end trace %016llx ]---\n", 0ULL);

kernel/panic.c

1040

pr_warn("WARNING: %s:%d at %pS, CPU#%d: %s/%d\n",

kernel/panic.c

1044

pr_warn("WARNING: at %pS, CPU#%d: %s/%d\n",

kernel/panic.c

1086

pr_warn(CUT_HERE);

kernel/panic.c

1108

pr_warn(CUT_HERE);

kernel/panic.c

319

pr_warn("panic_force_cpu: invalid value '%s'\n", str);

kernel/panic.c

393

pr_warn("panic: target CPU %d is offline, continuing on CPU %d\n",

kernel/panic.c

435

pr_warn("panic: failed to redirect to CPU %d, continuing on CPU %d\n",

kernel/panic.c

915

pr_warn("Disabling lock debugging due to kernel taint\n");

kernel/params.c

189

pr_warn("%s: option '%s' enabled irq's!\n",

kernel/power/energy_model.c

857

pr_warn("no free memory\n");

kernel/power/hibernate.c

1485

pr_warn("resumedelay: bad option string '%s'\n", str);

kernel/power/main.c

1002

pr_warn("PM: Enabling pm_trace changes system date and time during resume.\n"

kernel/power/suspend.c

584

pr_warn("Unsupported test mode for suspend to idle, please choose none/freezer/devices/platform.\n");

kernel/printk/printk.c

175

pr_warn("printk.devkmsg: bad option string '%s'\n", str);

kernel/printk/printk.c

4449

pr_warn("bootconsole [%s%d] uses init memory and must be disabled even before the real one is ready\n",

kernel/profile.c

94

pr_warn("profiling shift: %u too large\n", prof_shift);

kernel/rcu/rcuscale.c

1152

pr_warn("%s: gp_async_max = %d must be greater than zero.\n",

kernel/rcu/srcutree.c

2198

pr_warn("Failed to register srcu module notifier\n");

kernel/rcu/tree_nocb.h

64

pr_warn("rcu_nocbs= bad CPU range, all CPUs set\n");

kernel/reboot.c

869

pr_warn("Failed to start orderly reboot: forcing the issue\n");

kernel/reboot.c

884

pr_warn("Failed to start orderly shutdown: forcing the issue\n");

kernel/resource.c

1341

pr_warn("Unaddressable device %s %pR conflicts with %pR\n",

kernel/resource.c

1443

pr_warn("Trying to free nonexistent resource <%pa-%pa>\n", &start, &end);

kernel/resource.c

1861

pr_warn("resource sanity check: requesting [mem %pa-%pa], which spans more than %s %pR\n",

kernel/scftorture.c

457

pr_warn("%s: Memory-ordering failure, scfs_prim: %d.\n", __func__, scfsp->scfs_prim);

kernel/sched/core.c

10005

pr_warn("Unable to set rt_group_sched\n");

kernel/sched/core.c

136

pr_warn("Unable to parse sched_proxy_exec=\n");

kernel/sched/core.c

152

pr_warn("CONFIG_SCHED_PROXY_EXEC=n, so it cannot be enabled or disabled at boot time\n");

kernel/sched/core.c

4539

pr_warn("Unable to parse schedstats=\n");

kernel/sched/core.c

5533

pr_warn("Unable to set resched_latency_warn_ms\n");

kernel/sched/core.c

7706

pr_warn("Dynamic Preempt: unsupported mode: %s\n", str);

kernel/sched/cpufreq_schedutil.c

692

pr_warn("%s: failed to set SCHED_DEADLINE\n", __func__);

kernel/sched/ext.c

4386

pr_warn("sched_ext: ops error detected without ops (%s)\n",

kernel/sched/ext.c

5045

pr_warn("SCX_OPS_HAS_CGROUP_WEIGHT is deprecated and a noop\n");

kernel/sched/ext.c

5048

pr_warn("ops->cpu_acquire/release() are deprecated, use sched_switch TP instead\n");

kernel/sched/fair.c

86

pr_warn("Ignoring the deprecated sched_thermal_decay_shift= option\n");

kernel/sched/isolation.c

213

pr_warn("Housekeeping: nohz unsupported."

kernel/sched/isolation.c

221

pr_warn("Housekeeping: nohz_full= or isolcpus= incorrect CPU range\n");

kernel/sched/isolation.c

234

pr_warn("Housekeeping: must include one present CPU, "

kernel/sched/isolation.c

256

pr_warn("Housekeeping: nohz_full= must match isolcpus=\n");

kernel/sched/isolation.c

278

pr_warn("Housekeeping: must include one present CPU "

kernel/sched/isolation.c

353

pr_warn("isolcpus: Invalid flag %.*s\n", len, par);

kernel/sched/topology.c

1510

pr_warn("Unable to set relax_domain_level\n");

kernel/smp.c

513

pr_warn("IPI callback %pS sent to offline CPU\n",

kernel/smp.c

518

pr_warn("IPI task-wakeup sent to offline CPU\n");

kernel/smp.c

522

pr_warn("IPI callback, unknown type %d, sent to offline CPU\n",

kernel/static_call_inline.c

390

pr_warn("Failed to fixup __raw_static_call() usage at: %ps\n",

kernel/static_call_inline.c

455

pr_warn("Failed to allocate memory for static calls\n");

kernel/time/clocksource-wdtest.c

195

pr_warn("%s: Failed to create wdtest kthread.\n", __func__);

kernel/time/clocksource.c

1051

pr_warn("Override clocksource %s is unstable and not HRT compatible - cannot switch while in HRT/NOHZ mode\n",

kernel/time/clocksource.c

1246

pr_warn("clocksource %s registered with invalid VDSO mode %d. Disabling VDSO support.\n",

kernel/time/clocksource.c

1522

pr_warn("clock=pmtmr is deprecated - use clocksource=acpi_pm\n");

kernel/time/clocksource.c

1525

pr_warn("clock= boot option is deprecated - use clocksource=xyz\n");

kernel/time/clocksource.c

272

pr_warn("timekeeping watchdog on CPU%d: %s retried %d times before success\n",

kernel/time/clocksource.c

292

pr_warn("timekeeping watchdog on CPU%d: wd-%s-wd excessive read-back delay of %lldns vs. limit of %ldns, wd-wd read-back delay only %lldns, attempt %d, marking %s unstable\n",

kernel/time/clocksource.c

376

pr_warn("Not enough CPUs to check clocksource '%s'.\n", cs->name);

kernel/time/clocksource.c

405

pr_warn(" CPUs %*pbl ahead of CPU %d for clocksource %s.\n",

kernel/time/clocksource.c

408

pr_warn(" CPUs %*pbl behind CPU %d for clocksource %s.\n",

kernel/time/clocksource.c

508

pr_warn("Long readout interval, skipping watchdog check: cs_nsec: %lld wd_nsec: %lld\n",

kernel/time/clocksource.c

522

pr_warn("timekeeping watchdog on CPU%d: Marking clocksource '%s' as unstable because the skew is too large:\n",

kernel/time/clocksource.c

524

pr_warn(" '%s' wd_nsec: %lld wd_now: %llx wd_last: %llx mask: %llx\n",

kernel/time/clocksource.c

526

pr_warn(" '%s' cs_nsec: %lld cs_now: %llx cs_last: %llx mask: %llx\n",

kernel/time/clocksource.c

530

pr_warn(" Clocksource '%s' skewed %lld ns (%lld ms) over watchdog '%s' interval of %lld ns (%lld ms)\n",

kernel/time/clocksource.c

533

pr_warn(" '%s' is current clocksource.\n", cs->name);

kernel/time/clocksource.c

535

pr_warn(" '%s' (not '%s') is current clocksource.\n", curr_clocksource->name, cs->name);

kernel/time/clocksource.c

537

pr_warn(" No current clocksource.\n");

kernel/time/clocksource.c

771

pr_warn("Nonstop clocksource %s should not supply suspend/resume interfaces\n",

kernel/time/hrtimer.c

743

pr_warn("Could not switch to high resolution mode on CPU %u\n",

kernel/time/tick-sched.c

1191

pr_warn("NOHZ tick-stop error: local softirq work is pending, handler #%02x!!!\n",

kernel/time/tick-sched.c

662

pr_warn("NO_HZ: Can't run full dynticks because arch doesn't support IRQ work self-IPIs\n");

kernel/time/tick-sched.c

673

pr_warn("NO_HZ: Clearing %d from nohz_full range "

kernel/time/timekeeping.c

1815

pr_warn("Persistent clock returned invalid value");

kernel/torture.c

696

pr_warn("Concurrent rmmod and shutdown illegal!\n");

kernel/torture.c

873

pr_warn("Concurrent rmmod and shutdown illegal!\n");

kernel/trace/blktrace.c

1842

pr_warn("Warning: could not register block events\n");

kernel/trace/blktrace.c

1847

pr_warn("Warning: could not register the block tracer\n");

kernel/trace/blktrace.c

669

pr_warn("Concurrent blktraces are not allowed on %s\n", name);

kernel/trace/blktrace.c

703

pr_warn("debugfs_dir not present for %s so skipping\n", name);

kernel/trace/fgraph.c

1361

pr_warn("fgraph: Error to init cpu hotplug support\n");

kernel/trace/ftrace.c

2675

pr_warn("Bad trampoline accounting at: %p (%pS) (%lx)\n",

kernel/trace/ftrace.c

2716

pr_warn("Bad trampoline accounting at: %p (%pS)\n",

kernel/trace/ftrace.c

3204

pr_warn(" %pS flags:%lx\n",

kernel/trace/ftrace.c

8028

pr_warn("ftrace: failed to allocate entries for module '%s' functions\n",

kernel/trace/ftrace.c

8366

pr_warn("ftrace: failed to allocate entries for functions\n");

kernel/trace/ftrace.c

8501

pr_warn("op=%p %pS\n", op, op);

kernel/trace/ring_buffer.c

2419

pr_warn("Ring buffer meta buffers not all mapped\n");

kernel/trace/ring_buffer.c

2421

pr_warn(" Missing head_page\n");

kernel/trace/ring_buffer.c

2423

pr_warn(" Missing commit_page\n");

kernel/trace/ring_buffer.c

2425

pr_warn(" Missing tail_page\n");

kernel/trace/ring_buffer.c

3754

pr_warn("Ring buffer clock went backwards: %llu -> %llu\n",

kernel/trace/ring_buffer.c

4336

pr_warn(" [%lld] PAGE TIME STAMP\n", ts);

kernel/trace/ring_buffer.c

4347

pr_warn(" 0x%x: [%lld] delta:%lld TIME EXTEND\n",

kernel/trace/ring_buffer.c

4354

pr_warn(" 0x%x: [%lld] absolute:%lld TIME STAMP\n",

kernel/trace/ring_buffer.c

4360

pr_warn(" 0x%x: [%lld] delta:%d PADDING\n",

kernel/trace/ring_buffer.c

4366

pr_warn(" 0x%x: [%lld] delta:%d %s%s\n",

kernel/trace/ring_buffer.c

4375

pr_warn("expected end:0x%lx last event actually ended at:0x%x\n", tail, e);

kernel/trace/ring_buffer.c

4389

pr_warn(fmt, ##__VA_ARGS__); \

kernel/trace/ring_buffer.c

7680

pr_warn("Lockdown is enabled, skipping ring buffer tests\n");

kernel/trace/trace.c

10534

pr_warn("Line length is too long: Should be less than %d\n",

kernel/trace/trace.c

10606

pr_warn("Tracing: Instance %s is not found.\n", backup);

kernel/trace/trace.c

10611

pr_warn("Tracing: Instance %s is not boot mapped.\n", backup);

kernel/trace/trace.c

10620

pr_warn("Tracing: Failed to allocate memory for copying instance %s (size 0x%lx)\n",

kernel/trace/trace.c

10698

pr_warn("Tracing: Invalid boot instance address for %s\n",

kernel/trace/trace.c

10703

pr_warn("Tracing: No size specified for instance %s\n", name);

kernel/trace/trace.c

10709

pr_warn("Tracing: Invalid boot instance size for %s\n",

kernel/trace/trace.c

10717

pr_warn("Failed to map boot instance %s to %s\n", name, tok);

kernel/trace/trace.c

10726

pr_warn("Tracing: mapping start addr %pa is not page aligned\n", &start);

kernel/trace/trace.c

10730

pr_warn("Tracing: mapping size %pa is not page aligned\n", &size);

kernel/trace/trace.c

10742

pr_warn("Tracing: Failed to map boot instance %s\n", name);

kernel/trace/trace.c

10753

pr_warn("Tracing: Failed to create instance buffer %s\n", curr_str);

kernel/trace/trace.c

10795

pr_warn("Tracing disabled due to lockdown\n");

kernel/trace/trace.c

10861

pr_warn("Trace clock %s not defined, going back to default\n",

kernel/trace/trace.c

11004

pr_warn("Can not set tracing clock due to lockdown\n");

kernel/trace/trace.c

1774

pr_warn("Selftest for tracer %s skipped due to tracing disabled\n",

kernel/trace/trace.c

1939

pr_warn("Can not register tracer %s due to lockdown\n",

kernel/trace/trace.c

1968

pr_warn("Failed to create tracer options for %s\n", type->name);

kernel/trace/trace.c

5136

pr_warn("Unable to allocate trace eval mapping\n");

kernel/trace/trace.c

5593

pr_warn("Tracer '%s' is not allowed on command line, ignored\n",

kernel/trace/trace.c

8633

pr_warn("Could not create tracefs '%s' entry\n", cpu_dir);

kernel/trace/trace.c

8847

pr_warn("Could not create tracefs '%s' entry\n", name);

kernel/trace/trace.c

8866

pr_warn("Could not create tracefs directory 'options'\n");

kernel/trace/trace.c

9974

pr_warn("NOTICE: Automounting of tracing to debugfs is deprecated and will be removed in 2030\n");

kernel/trace/trace.c

9999

pr_warn("Tracing disabled due to lockdown\n");

kernel/trace/trace_benchmark.c

180

pr_warn("trace benchmark cannot be started via kernel command line\n");

kernel/trace/trace_benchmark.c

187

pr_warn("trace benchmark failed to create kernel thread\n");

kernel/trace/trace_eprobe.c

983

pr_warn("Could not register eprobe_dyn_event_ops\n");

kernel/trace/trace_events.c

2984

pr_warn("Failed to create system directory %s\n", name);

kernel/trace/trace_events.c

3005

pr_warn("No memory to create event subsystem %s\n", name);

kernel/trace/trace_events.c

3201

pr_warn("Could not create tracefs '%s' directory\n", name);

kernel/trace/trace_events.c

3209

pr_warn("Could not initialize trace point events/%s\n", name);

kernel/trace/trace_events.c

3279

pr_warn("Could not initialize trace events/%s\n", name);

kernel/trace/trace_events.c

4002

pr_warn("Could not create directory for event %s\n",

kernel/trace/trace_events.c

413

pr_warn("TRACE EVENT ERROR: Bad dereference argument: '%.*s'\n",

kernel/trace/trace_events.c

4442

pr_warn("Could not create directory for event %s\n",

kernel/trace/trace_events.c

4466

pr_warn("Could not create early event %s\n",

kernel/trace/trace_events.c

4568

pr_warn("Could not create tracefs 'events' directory\n");

kernel/trace/trace_events.c

4689

pr_warn("Failed to enable trace event: %s\n", token);

kernel/trace/trace_events.c

4793

pr_warn("tracing: Failed to allocated generic fields");

kernel/trace/trace_events.c

4796

pr_warn("tracing: Failed to allocate common fields");

kernel/trace/trace_events.c

4820

pr_warn("Failed to register trace events module notifier\n");

kernel/trace/trace_events.c

4935

pr_warn("Enabled event during self test!\n");

kernel/trace/trace_events.c

4963

pr_warn("error enabling system %s\n",

kernel/trace/trace_events.c

4972

pr_warn("error disabling system %s\n",

kernel/trace/trace_events.c

4987

pr_warn("error enabling all events\n");

kernel/trace/trace_events.c

4996

pr_warn("error disabling all events\n");

kernel/trace/trace_events.c

612

pr_warn("event %s has unsafe dereference of argument %d\n",

kernel/trace/trace_events.c

614

pr_warn("print_fmt: %s\n", fmt);

kernel/trace/trace_events_synth.c

2334

pr_warn("Could not register synth_event_ops\n");

kernel/trace/trace_events_synth.c

2357

pr_warn("Could not create tracefs 'synthetic_events' entry\n");

kernel/trace/trace_events_synth.c

925

pr_warn("Failed to register synthetic event: %s\n",

kernel/trace/trace_events_user.c

255

pr_warn("user_events: Unable to delete event\n");

kernel/trace/trace_events_user.c

2857

pr_warn("Could not create tracefs 'user_events_data' entry\n");

kernel/trace/trace_events_user.c

2866

pr_warn("Could not create tracefs 'user_events_mmap' entry\n");

kernel/trace/trace_events_user.c

2918

pr_warn("user_events could not register with tracefs\n");

kernel/trace/trace_events_user.c

2926

pr_warn("user_events could not register with dyn_events\n");

kernel/trace/trace_events_user.c

329

pr_warn("user_events: Unable to queue delayed destroy\n");

kernel/trace/trace_events_user.c

458

pr_warn("user_events: Fault for mm: 0x%p @ 0x%llx event: %s\n",

kernel/trace/trace_events_user.c

559

pr_warn("user_events: Unable to queue fault handler\n");

kernel/trace/trace_fprobe.c

969

pr_warn("Failed to register probe event(%d)\n", ret);

kernel/trace/trace_functions_graph.c

1650

pr_warn("function graph tracer: not enough memory\n");

kernel/trace/trace_functions_graph.c

1819

pr_warn("Warning: could not register graph trace events\n");

kernel/trace/trace_functions_graph.c

1825

pr_warn("Warning: could not register graph trace retaddr events\n");

kernel/trace/trace_functions_graph.c

1831

pr_warn("Warning: could not register graph trace events\n");

kernel/trace/trace_hwlat.c

557

pr_warn(BANNER "Error to init cpu hotplug support\n");

kernel/trace/trace_kprobe.c

2011

pr_warn("Failed to add event(%d): %s\n", ret, cmd);

kernel/trace/trace_kprobe.c

498

pr_warn("Could not probe notrace function %ps\n",

kernel/trace/trace_kprobe.c

620

pr_warn("This probe might be able to register after target module is loaded. Continue.\n");

kernel/trace/trace_kprobe.c

658

pr_warn("Failed to register probe event(%d)\n", ret);

kernel/trace/trace_kprobe.c

665

pr_warn("This probe might be able to register after target module is loaded. Continue.\n");

kernel/trace/trace_kprobe.c

713

pr_warn("Failed to re-register probe %s on %s: %d\n",

kernel/trace/trace_mmiotrace.c

144

pr_warn("mmiotrace has lost events\n");

kernel/trace/trace_osnoise.c

2115

pr_warn(BANNER "Error to init cpu hotplug support\n");

kernel/trace/trace_printk.c

551

pr_warn("\n");

kernel/trace/trace_printk.c

552

pr_warn("**********************************************************\n");

kernel/trace/trace_printk.c

553

pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");

kernel/trace/trace_printk.c

554

pr_warn("** **\n");

kernel/trace/trace_printk.c

555

pr_warn("** trace_printk() being used. Allocating extra memory. **\n");

kernel/trace/trace_printk.c

556

pr_warn("** **\n");

kernel/trace/trace_printk.c

557

pr_warn("** This means that this is a DEBUG kernel and it is **\n");

kernel/trace/trace_printk.c

558

pr_warn("** unsafe for production use. **\n");

kernel/trace/trace_printk.c

559

pr_warn("** **\n");

kernel/trace/trace_printk.c

560

pr_warn("** If you see this message and you are not debugging **\n");

kernel/trace/trace_printk.c

561

pr_warn("** the kernel, report this immediately to your vendor! **\n");

kernel/trace/trace_printk.c

562

pr_warn("** **\n");

kernel/trace/trace_printk.c

563

pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");

kernel/trace/trace_printk.c

564

pr_warn("**********************************************************\n");

kernel/trace/trace_selftest.c

893

pr_warn("Failed to init store_bytes fgraph tracing\n");

kernel/trace/trace_selftest.c

967

pr_warn("Failed to init store_bytes fgraph tracing\n");

kernel/trace/trace_stat.c

284

pr_warn("Could not create tracefs 'trace_stat' entry\n");

kernel/trace/trace_uprobe.c

490

pr_warn("Reference counter offset mismatch.");

kernel/trace/trace_uprobe.c

527

pr_warn("Failed to register probe event(%d)\n", ret);

kernel/tracepoint.c

695

pr_warn("Failed to register tracepoint module enter notifier\n");

kernel/vmcore_info.c

148

pr_warn("Memory allocation for vmcoreinfo_data failed\n");

kernel/vmcore_info.c

157

pr_warn("Memory allocation for vmcoreinfo_note failed\n");

kernel/workqueue.c

4213

pr_warn("workqueue %s: %s() isn't complete after %u tries\n",

kernel/workqueue.c

5544

pr_warn("workqueue: allocation failed while updating CPU pod affinity of \"%s\"\n",

kernel/workqueue.c

5639

pr_warn("workqueue: max_active %d requested for %s is out of range, clamping between %d and %d\n",

kernel/workqueue.c

5986

pr_warn("%s: %s has the following busy pwq\n",

kernel/workqueue.c

7830

pr_warn("workqueue: Restricting unbound_cpumask (%*pb) with %s (%*pb) leaves no CPU, ignoring\n",

kernel/workqueue.c

8176

pr_warn("WARNING: Flushing system-wide workqueues will be prohibited in near future.\n");

kernel/workqueue.c

8185

pr_warn("workqueue.unbound_cpus: incorrect CPU range, using default\n");

lib/alloc_tag.c

548

pr_warn("With module %s there are too many tags to fit in %d page flag bits. Memory allocation profiling is disabled!\n",

lib/codetag.c

185

pr_warn("Failed to load code tags of type %s from the module %s\n",

lib/cpu_rmap.c

271

pr_warn("irq_cpu_rmap_notify: update failed: %d\n", rc);

lib/crypto/s390/sha3.h

149

pr_warn("Unsupported combination of SHA-3 facilities\n");

lib/debugobjects.c

1508

pr_warn("Out of memory.\n");

lib/debugobjects.c

589

pr_warn("Out of memory. ODEBUG disabled\n");

lib/debugobjects.c

666

pr_warn("object %p is on stack %p, but NOT annotated.\n", addr,

lib/debugobjects.c

669

pr_warn("object %p is NOT on stack %p, but annotated.\n", addr,

lib/dynamic_debug.c

1014

pr_warn("expected <%d bytes into control\n", USER_BUF_PAGE);

lib/dynamic_debug.c

1425

pr_warn("Failed to register dynamic debug module notifier\n");

lib/dynamic_debug.c

1432

pr_warn("_ddebug table is empty in a CONFIG_DYNAMIC_DEBUG build\n");

lib/dynamic_debug.c

752

pr_warn("%s: input: 0x%lx exceeds mask: 0x%lx, masking\n",

lib/dynamic_debug.c

763

pr_warn("%s: level:%ld exceeds max:%d, clamping\n",

lib/dynamic_debug.c

774

pr_warn("%s: bad map type: %d\n", KP_NAME(kp), map->map_type);

lib/earlycpio.c

125

pr_warn(

lib/fw_table.c

204

pr_warn("[%4.4s:0x%02x] ignored %i entries of %i found\n",

lib/kobject.c

800

pr_warn("%s: kobject_add error: %d\n", __func__, retval);

lib/kobject_uevent.c

226

pr_warn("synth uevent: %s: %s\n",

lib/kobject_uevent.c

258

pr_warn("%s: insufficient buffer space (%u left) for %s\n",

lib/logic_pio.c

81

pr_warn("Requested IO range too big, new size set to 64K\n");

lib/nmi_backtrace.c

106

pr_warn("NMI backtrace for cpu %d skipped: idling at %pS\n",

lib/nmi_backtrace.c

109

pr_warn("NMI backtrace for cpu %d\n", cpu);

lib/random32.c

273

pr_warn("prandom: seed boundary self test failed\n");

lib/random32.c

294

pr_warn("prandom: %d/%d self tests failed\n", errors, runs);

lib/reed_solomon/test_rslib.c

344

pr_warn(" FAIL: %d decoding failures!\n", retval);

lib/reed_solomon/test_rslib.c

437

pr_warn(" FAIL: %d silent failures!\n", stat.noncw);

lib/reed_solomon/test_rslib.c

502

pr_warn("rslib: test failed\n");

lib/test_bitmap.c

112

pr_warn("[%s:%u] bit offset for clump out-of-bounds: expected less than %u, got %u\n",

lib/test_bitmap.c

119

pr_warn("[%s:%u] bit offset for zero clump: expected nonzero clump, got bit offset %u with clump value 0",

lib/test_bitmap.c

125

pr_warn("[%s:%u] expected clump value of 0x%lX, got clump value of 0x%lX",

lib/test_bitmap.c

80

pr_warn("[%s:%u] bitmaps contents differ: expected \"%*pbl\", got \"%*pbl\"\n",

lib/test_bitmap.c

95

pr_warn("[%s:%u] expected \"%s\", got \"%s\"\n",

lib/test_bitops.c

106

pr_warn("get_count_order_long wrong for %lx\n",

lib/test_bitops.c

92

pr_warn("get_count_order wrong for %x\n",

lib/test_bitops.c

98

pr_warn("get_count_order_long wrong for %x\n",

lib/test_firmware.c

1548

pr_warn("interface ready\n");

lib/test_firmware.c

1565

pr_warn("removed interface\n");

lib/test_kho.c

333

pr_warn("failed to retrieve %s FDT: %d\n", KHO_TEST_FDT, err);

lib/test_module.c

19

pr_warn("Hello, world\n");

lib/test_module.c

28

pr_warn("Goodbye\n");

lib/test_rhashtable.c

156

pr_warn("Test failed: Could not find key %u\n", key.id);

lib/test_rhashtable.c

159

pr_warn("Test failed: Unexpected entry found for key %u\n",

lib/test_rhashtable.c

164

pr_warn("Test failed: Lookup value mismatch %u!=%u\n",

lib/test_rhashtable.c

191

pr_warn("Test failed: rhashtable_walk_next() error: %ld\n",

lib/test_rhashtable.c

206

pr_warn("Test failed: Total count mismatch ^^^");

lib/test_rhashtable.c

715

pr_warn("Test failed: Unable to initialize hashtable: %d\n",

lib/test_rhashtable.c

724

pr_warn("Test failed: return code %lld\n", time);

lib/test_rhashtable.c

760

pr_warn("Test failed: Unable to initialize hashtable: %d\n",

lib/test_rhashtable.c

788

pr_warn("Test failed: thread %d returned: %d\n",

lib/ubsan.c

223

pr_warn(CUT_HERE);

lib/ubsan.c

234

pr_warn("---[ end trace ]---\n");

lib/vsprintf.c

2342

pr_warn("**********************************************************\n");

lib/vsprintf.c

2343

pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");

lib/vsprintf.c

2344

pr_warn("** **\n");

lib/vsprintf.c

2345

pr_warn("** This system shows unhashed kernel memory addresses **\n");

lib/vsprintf.c

2346

pr_warn("** via the console, logs, and other interfaces. This **\n");

lib/vsprintf.c

2347

pr_warn("** might reduce the security of your system. **\n");

lib/vsprintf.c

2348

pr_warn("** **\n");

lib/vsprintf.c

2349

pr_warn("** If you see this message and you are not debugging **\n");

lib/vsprintf.c

2350

pr_warn("** the kernel, report this immediately to your system **\n");

lib/vsprintf.c

2351

pr_warn("** administrator! **\n");

lib/vsprintf.c

2352

pr_warn("** **\n");

lib/vsprintf.c

2353

pr_warn("** Use hash_pointers=always to force this mode off **\n");

lib/vsprintf.c

2354

pr_warn("** **\n");

lib/vsprintf.c

2355

pr_warn("** NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE NOTICE **\n");

lib/vsprintf.c

2356

pr_warn("**********************************************************\n");

lib/vsprintf.c

2362

pr_warn("Hash pointers mode empty; falling back to auto.\n");

lib/vsprintf.c

2374

pr_warn("Unknown hash_pointers mode '%s' specified; assuming auto.\n", str);

mm/bpf_memcontrol.c

189

pr_warn("error while registering bpf memcontrol kfuncs: %d", err);

mm/debug.c

115

pr_warn("%sflags: %pGp%s\n", type, &folio->flags,

mm/debug.c

118

pr_warn("page_type: %x(%s)\n", folio->page.page_type >> 24,

mm/debug.c

136

pr_warn("page does not match folio\n");

mm/debug.c

144

pr_warn("page:%p is uninitialized and poisoned\n", page);

mm/debug.c

148

pr_warn("page dumped because: %s\n", reason);

mm/debug.c

237

pr_warn("vmg %px dumped because: %s\n", vmg, reason);

mm/debug.c

240

pr_warn("vmg %px state: (NULL)\n", vmg);

mm/debug.c

244

pr_warn("vmg %px state: mm %px pgoff %lx\n"

mm/debug.c

273

pr_warn("vmg %px mm:\n", vmg);

mm/debug.c

276

pr_warn("vmg %px mm: (NULL)\n", vmg);

mm/debug.c

280

pr_warn("vmg %px prev:\n", vmg);

mm/debug.c

283

pr_warn("vmg %px prev: (NULL)\n", vmg);

mm/debug.c

287

pr_warn("vmg %px middle:\n", vmg);

mm/debug.c

290

pr_warn("vmg %px middle: (NULL)\n", vmg);

mm/debug.c

294

pr_warn("vmg %px next:\n", vmg);

mm/debug.c

297

pr_warn("vmg %px next: (NULL)\n", vmg);

mm/debug.c

302

pr_warn("vmg %px vmi:\n", vmg);

mm/debug.c

305

pr_warn("vmg %px vmi: (NULL)\n", vmg);

mm/debug.c

342

pr_warn("Page struct poisoning disabled by kernel command line option 'vm_debug'\n");

mm/debug.c

80

pr_warn("page: refcount:%d mapcount:%d mapping:%p index:%#lx pfn:%#lx\n",

mm/debug.c

89

pr_warn("head: order:%u mapcount:%d entire_mapcount:%d nr_pages_mapped:%d pincount:%d\n",

mm/debug.c

99

pr_warn("memcg:%lx\n", folio->memcg_data);

mm/early_ioremap.c

36

pr_warn(fmt, ##args); \

mm/gup.c

1292

pr_warn("GUP no longer grows the stack in %s (%d): %lx-%lx (%lx)\n",

mm/gup_test.c

82

pr_warn("ZEROING due to out of range: .which_pages[%u]: %u\n",

mm/huge_memory.c

1071

pr_warn("thp_anon=%s: error parsing string, ignoring setting\n", str);

mm/huge_memory.c

883

pr_warn("Allocating persistent huge zero folio failed\n");

mm/huge_memory.c

985

pr_warn("transparent_hugepage= cannot parse, ignored\n");

mm/hugetlb.c

3459

pr_warn("HugeTLB: allocating %u of page size %s failed node%d. Only allocated %lu hugepages.\n",

mm/hugetlb.c

3486

pr_warn("HugeTLB: allocating %lu of page size %s failed. Only allocated %lu hugepages.\n",

mm/hugetlb.c

4041

pr_warn("HugeTLB: NULL demote order passed to demote_pool_huge_page.\n");

mm/hugetlb.c

4140

pr_warn("HugeTLB: huge pages not supported, ignoring associated command-line parameters\n");

mm/hugetlb.c

4165

pr_warn("HugeTLB: Ignoring hugepages=%lu associated with %s page size\n",

mm/hugetlb.c

4167

pr_warn("HugeTLB: Using hugepages=%lu for number of default huge pages\n",

mm/hugetlb.c

4305

pr_warn("HugeTLB: hugepages unsupported, ignoring hugepages=%s cmdline\n", s);

mm/hugetlb.c

4310

pr_warn("HugeTLB: hugepages=%s does not follow a valid hugepagesz, ignoring\n", s);

mm/hugetlb.c

4327

pr_warn("HugeTLB: hugepages= specified twice without interleaving hugepagesz=, ignoring hugepages=%s\n", s);

mm/hugetlb.c

4338

pr_warn("HugeTLB: architecture can't support node specific alloc, ignoring!\n");

mm/hugetlb.c

4371

pr_warn("HugeTLB: Invalid hugepages parameter %s\n", p);

mm/hugetlb.c

4390

pr_warn("HugeTLB: hugepages unsupported, ignoring hugepagesz=%s cmdline\n", s);

mm/hugetlb.c

4413

pr_warn("HugeTLB: hugepagesz=%s specified twice, ignoring\n", s);

mm/hugetlb.c

4443

pr_warn("HugeTLB: hugepages unsupported, ignoring default_hugepagesz=%s cmdline\n",

mm/hugetlb.c

4725

pr_warn("HugeTLB: vma_lock already exists in %s.\n", __func__);

mm/hugetlb.c

975

pr_warn("hugetlb: Huge Page Reserved count may go negative.\n");

mm/hugetlb_cma.c

154

pr_warn("hugetlb_cma: the option isn't supported by current arch\n");

mm/hugetlb_cma.c

173

pr_warn("hugetlb_cma: invalid node %d specified\n", nid);

mm/hugetlb_cma.c

180

pr_warn("hugetlb_cma: cma area of node %d should be at least %lu MiB\n",

mm/hugetlb_cma.c

194

pr_warn("hugetlb_cma: cma area should be at least %lu MiB\n",

mm/hugetlb_cma.c

237

pr_warn("hugetlb_cma: reservation failed: err %d, node %d",

mm/hugetlb_sysfs.c

328

pr_warn("HugeTLB unable to create demote interfaces for %s\n", h->name);

mm/internal.h

1255

pr_warn("mminit::" prefix " " fmt, ##arg); \

mm/kfence/core.c

1020

pr_warn("KFENCE_NUM_OBJECTS too large for buddy allocator\n");

mm/kmemleak.c

1924

pr_warn("Failed to create the scan thread\n");

mm/kmemleak.c

253

pr_warn(x); \

mm/kmemleak.c

271

pr_warn(fmt, ##__VA_ARGS__); \

mm/kmemleak.c

667

pr_warn("Cannot allocate a kmemleak_object structure\n");

mm/memblock.c

1897

pr_warn("%s: No memory registered yet\n", __func__);

mm/memblock.c

2561

pr_warn("failed to retrieve FDT '%s' from KHO: %d\n",

mm/memblock.c

2570

pr_warn("FDT '%s' is incompatible with '%s': %d\n",

mm/memblock.c

2591

pr_warn("FDT '%s' has no child '%s': %d\n",

mm/memblock.c

2597

pr_warn("Node '%s' is incompatible with '%s': %d\n",

mm/memblock.c

2610

pr_warn("KHO reserve-mem '%s' has wrong alignment (0x%lx, 0x%lx)\n",

mm/memblock.c

2616

pr_warn("KHO reserve-mem '%s' has wrong size (0x%lx != 0x%lx)\n",

mm/memcontrol.c

1546

pr_warn("%s: Warning, stat buffer overflow, please report\n", __func__);

mm/memcontrol.c

5676

pr_warn("Memory cgroup min protection %lukB -- low protection %lukB",

mm/memory_hotplug.c

1733

pr_warn("Hotplug memory [%#llx-%#llx] exceeds maximum addressable range [%#llx-%#llx]\n",

mm/memory_hotplug.c

1835

pr_warn("failed to isolate pfn %lx\n",

mm/memory_hotplug.c

1871

pr_warn("migrating pfn %lx failed ret:%d\n",

mm/memory_hotplug.c

2129

pr_warn("removing memory fails, because memory [%pa-%pa] is onlined\n",

mm/memory_hotplug.c

2364

pr_warn("%s: Failed to re-online memory: %d",

mm/mempolicy.c

3324

pr_warn("Unable to parse numa_balancing=\n");

mm/mm_init.c

398

pr_warn("The system has no mirror memory, ignore kernelcore=mirror.\n");

mm/mm_init.c

403

pr_warn("The system is under kdump, ignore kernelcore=mirror.\n");

mm/mm_init.c

426

pr_warn("This configuration results in unmirrored kernel memory.\n");

mm/nommu.c

1231

pr_warn("Attempt to share mismatched mappings\n");

mm/nommu.c

1237

pr_warn("Allocation of vma for %lu byte allocation from process %d failed\n",

mm/nommu.c

1243

pr_warn("Allocation of vm region for %lu byte allocation from process %d failed\n",

mm/nommu.c

1346

pr_warn("Allocation of vma tree for process %d failed\n",

mm/nommu.c

1444

pr_warn("munmap of memory not mmapped by process %d (%s): 0x%lx-0x%lx\n",

mm/nommu.c

603

pr_warn("Allocation of vma tree for process %d failed\n",

mm/nommu.c

798

pr_warn("MAP_SHARED not completely supported on !MMU\n");

mm/numa_emulation.c

445

pr_warn("NUMA: Warning: constructed meminfo invalid, disabling emulation\n");

mm/numa_emulation.c

453

pr_warn("NUMA: Warning: can't allocate copy of distance table, disabling emulation\n");

mm/numa_memblks.c

144

pr_warn("Warning: invalid memblk node %d [mem %#010Lx-%#010Lx]\n",

mm/numa_memblks.c

289

pr_warn("Warning: node %d [mem %#010Lx-%#010Lx] overlaps with itself [mem %#010Lx-%#010Lx]\n",

mm/numa_memblks.c

436

pr_warn("Node alignment %luMB < min %luMB, rejecting NUMA config\n",

mm/numa_memblks.c

68

pr_warn("Warning: can't allocate distance table!\n");

mm/oom_kill.c

1175

pr_warn("Out of memory and no killable processes...\n");

mm/oom_kill.c

1208

pr_warn("Huh VM_FAULT_OOM leaked out to the #PF handler. Retrying PF\n");

mm/oom_kill.c

461

pr_warn("%s invoked oom-killer: gfp_mask=%#x(%pGg), order=%d, oom_score_adj=%d\n",

mm/oom_kill.c

465

pr_warn("COMPACTION is disabled!!!\n");

mm/page-writeback.c

2237

pr_warn("%s: vm.laptop_mode is deprecated. Ignoring setting.\n",

mm/page_alloc.c

4039

pr_warn("%s: %pV, mode:%#x(%pGg), nodemask=%*pbl",

mm/page_alloc.c

5580

pr_warn("Ignoring unsupported numa_zonelist_order value: %s\n", s);

mm/page_alloc.c

6556

pr_warn("min_free_kbytes is not updated to %d because user defined value %d is preferred\n",

mm/page_owner.c

240

pr_warn("%s: refcount went to 0 for %u handle\n", __func__,

mm/percpu-km.c

121

pr_warn("wasting %zu pages per chunk\n",

mm/percpu.c

1917

pr_warn("allocation failed, size=%zu align=%zu atomic=%d, %s\n",

mm/percpu.c

2761

pr_warn("unknown allocator %s specified\n", str);

mm/percpu.c

3072

pr_warn("max_distance=0x%lx too large for vmalloc space 0x%lx\n",

mm/percpu.c

3235

pr_warn("failed to allocate %s page for cpu%u\n",

mm/shmem.c

316

pr_warn("tmpfs: failed to enable quota tracking (type=%d, err=%d)\n",

mm/shmem.c

372

pr_warn("%s: inode number overflow on device %d, consider using inode64 mount option\n",

mm/shmem.c

5623

pr_warn("transparent_hugepage_shmem= cannot parse, ignored\n");

mm/shmem.c

5638

pr_warn("transparent_hugepage_tmpfs= cannot parse, ignored\n");

mm/shmem.c

5743

pr_warn("thp_shmem=%s: error parsing string, ignoring setting\n", str);

mm/shrinker.c

741

pr_warn("Must use shrinker_alloc() to dynamically allocate the shrinker");

mm/slab_common.c

1031

pr_warn("Unexpected gfp: %#x (%pGg). Fixing up to gfp: %#x (%pGg). Fix your code!\n",

mm/slab_common.c

1153

pr_warn("excessive unreclaimable slab but cannot dump stats\n");

mm/slab_common.c

394

pr_warn("%s(%s) failed with error %d\n",

mm/slub.c

4238

pr_warn("SLUB: Unable to allocate memory on CPU %u (of node %d) on node %d, gfp=%#x(%pGg)\n",

mm/slub.c

4240

pr_warn(" cache: %s, object size: %u, buffer size: %u, default order: %u, min order: %u\n",

mm/slub.c

4245

pr_warn(" %s debugging increased min order, use slab_debug=O to disable.\n",

mm/slub.c

4257

pr_warn(" node %d: slabs: %ld, objs: %ld, free: %ld\n",

mm/slub.c

8021

pr_warn("slab_strict_numa parameter set on non NUMA system.\n");

mm/swapfile.c

3188

pr_warn("Unable to handle swap header version %d\n",

mm/swapfile.c

3196

pr_warn("Empty swap-file\n");

mm/swapfile.c

3200

pr_warn("Truncating oversized swap area, only using %luk out of %luk\n",

mm/swapfile.c

3214

pr_warn("Swap area shorter than signature indicates\n");

mm/swapfile.c

3244

pr_warn("Empty swap-file\n");

mm/usercopy.c

271

pr_warn("Invalid option string for hardened_usercopy: '%s'\n",

mm/vma.h

590

pr_warn("%lx > %lx\n store vma %lx-%lx\n into slot %lx-%lx\n",

mm/vma.h

596

pr_warn("%lx < %lx\nstore vma %lx-%lx\ninto slot %lx-%lx\n",

mm/vmalloc.c

2153

pr_warn("vmalloc_node_range for size %lu failed: Address range restricted to %#lx - %#lx\n",

mm/vmstat.c

2008

pr_warn("%s: %s %ld\n",

mm/vmstat.c

2022

pr_warn("%s: %s %ld\n",

mm/zsmalloc.c

503

pr_warn("debugfs not available, stat dir not created\n");

mm/zsmalloc.c

585

pr_warn("no root stat dir, not creating <%s> stat dir\n", name);

mm/zswap.c

1822

pr_warn("debugfs initialization failed\n");

net/9p/client.c

309

pr_warn("Packet with tag %d has still references",

net/appletalk/ddp.c

1229

pr_warn("atalk_connect: %s is broken and did not set SO_BROADCAST.\n",

net/atm/clip.c

401

pr_warn("XOFF->XOFF transition\n");

net/atm/clip.c

466

pr_warn("non-CLIP VCC\n");

net/atm/common.c

299

pr_warn("AAL problems ... (%d)\n", aal);

net/batman-adv/bat_iv_ogm.c

411

pr_warn("%s: mesh interface switch for queued OGM\n", __func__);

net/batman-adv/hard-interface.c

175

pr_warn("Cannot find parent device. Skipping batadv-on-batadv check for %s\n",

net/batman-adv/hard-interface.c

528

pr_warn("The newly added mac address (%pM) already exists on: %s\n",

net/batman-adv/hard-interface.c

530

pr_warn("It is strongly recommended to keep mac addresses unique to avoid problems!\n");

net/batman-adv/netlink.c

1550

pr_warn("unable to register netlink family\n");

net/batman-adv/send.c

75

pr_warn("Interface %s is not up - can't send packet via that interface!\n",

net/bluetooth/lib.c

276

pr_warn("%pV", &vaf);

net/caif/caif_dev.c

396

pr_warn("Out of memory\n");

net/caif/caif_socket.c

848

pr_warn("CAIF Interface MTU too small (%d)\n", dev->mtu);

net/caif/caif_usb.c

180

pr_warn("USB device uses more than one tx queue\n");

net/caif/caif_usb.c

66

pr_warn("Headroom too small\n");

net/caif/cfcnfg.c

381

pr_warn("received channel_id zero\n");

net/caif/cfcnfg.c

475

pr_warn("Too many CAIF Link Layers (max 6)\n");

net/caif/cfctrl.c

150

pr_warn("Requests are not received in order\n");

net/caif/cfctrl.c

268

pr_warn("Request setup of bad link type = %d\n",

net/caif/cfctrl.c

465

pr_warn("Request setup, invalid type (%d)\n", serv);

net/caif/cfmuxl.c

158

pr_warn("Trying to remove control layer\n");

net/caif/cfpkt_skbuff.c

21

pr_warn(errmsg); \

net/caif/cfsrvl.c

86

pr_warn("Unexpected ctrl in cfsrvl (%d)\n", ctrl);

net/caif/cfutill.c

73

pr_warn("Unknown service control %d (0x%x)\n", cmd, cmd);

net/caif/cfveil.c

69

pr_warn("Unknown VEI control packet %d (0x%x)!\n", cmd, cmd);

net/caif/chnl_net.c

206

pr_warn("Size of skb exceeded MTU\n");

net/caif/chnl_net.c

291

pr_warn("CAIF Interface MTU too small (%d)\n", mtu);

net/caif/chnl_net.c

424

pr_warn("no params data found\n");

net/caif/chnl_net.c

454

pr_warn("device rtml registration failed\n");

net/can/af_can.c

550

pr_warn("can: receive list entry not found for dev %s, id %03X, mask %03X\n",

net/can/j1939/socket.c

326

pr_warn("skb clone failed\n");

net/ceph/messenger.c

1620

pr_warn("%s%lld %s %s\n", ENTITY_NAME(con->peer_name),

net/ceph/messenger_v1.c

715

pr_warn("wrong peer, want %s/%u, got %s/%u\n",

net/ceph/messenger_v2.c

1974

pr_warn("%s: ret 0x%x total_resid 0x%zx resid 0x%zx\n",

net/ceph/mon_client.c

1538

pr_warn("mon_alloc_msg front %d > prealloc %d (%u#%llu)\n",

net/ceph/osd_client.c

3554

pr_warn("got v %d < 3 cv %d of ceph_object_locator\n",

net/ceph/osd_client.c

3559

pr_warn("got v %d cv %d > 6 of ceph_object_locator\n",

net/ceph/osd_client.c

3572

pr_warn("ceph_object_locator::key is set\n");

net/ceph/osd_client.c

3592

pr_warn("ceph_object_locator::nspace is changed\n");

net/ceph/osd_client.c

3600

pr_warn("ceph_object_locator::hash is set\n");

net/ceph/osd_client.c

3627

pr_warn("got v %d cv %d > 1 of ceph_request_redirect\n",

net/ceph/osd_client.c

3641

pr_warn("ceph_request_redirect::object_name is set\n");

net/ceph/osd_client.c

5443

pr_warn("%s osd%d tid %llu front %d > preallocated %d\n",

net/ceph/osd_client.c

5456

pr_warn("%s osd%d tid %llu data %d > preallocated %zu, skipping\n",

net/ceph/osd_client.c

5519

pr_warn("%s osd%d unknown msg type %d, skipping\n", __func__,

net/ceph/osdmap.c

1292

pr_warn("got v %d cv %d > %d of %s ceph_osdmap\n",

net/ceph/osdmap.c

1302

pr_warn("got v %d cv %d > %d of %s ceph_osdmap client data\n",

net/ceph/osdmap.c

1314

pr_warn("got v %d < 6 of %s ceph_osdmap\n",

net/ceph/osdmap.c

801

pr_warn("got v %d < 5 cv %d of ceph_pg_pool\n", ev, cv);

net/ceph/osdmap.c

805

pr_warn("got v %d cv %d > 9 of ceph_pg_pool\n", ev, cv);

net/core/dev.c

667

pr_warn("dev_remove_pack: %p not found\n", pt);

net/core/gro.c

66

pr_warn("dev_remove_offload: %p not found\n", po);

net/core/hwbm.c

52

pr_warn("pool already filled\n");

net/core/hwbm.c

58

pr_warn("cannot allocate %d buffers for pool\n",

net/core/hwbm.c

65

pr_warn("Adding %d buffers to the %d current buffers will overflow\n",

net/core/neighbour.c

925

pr_warn("Destroying alive neighbour %p\n", neigh);

net/core/neighbour.c

931

pr_warn("Impossible event\n");

net/core/page_pool.c

1225

pr_warn("%s() stalled pool shutdown: id %u, %d inflight %d sec\n",

net/core/page_pool.c

298

pr_warn("%s() mem-provider init failed %d\n", __func__,

net/core/page_pool.c

360

pr_warn("%s() gave up with errno %d\n", __func__, err);

net/core/pktgen.c

1000

pr_warn("wrong command format\n");

net/core/pktgen.c

1007

pr_warn("illegal format\n");

net/core/pktgen.c

2210

pr_warn("WARNING: Requested queue_map_min (zero-based) (%d) exceeds valid range [0 - %d] for (%d) queues on %s, resetting\n",

net/core/pktgen.c

2216

pr_warn("WARNING: Requested queue_map_max (zero-based) (%d) exceeds valid range [0 - %d] for (%d) queues on %s, resetting\n",

net/core/pktgen.c

3388

pr_warn("interface: %s is already stopped\n",

net/core/pktgen.c

3989

pr_warn("WARNING: trying to remove a running interface, stopping it now\n");

net/core/pktgen.c

4030

pr_warn("cannot create /proc/net/%s\n", PG_PROC_DIR);

net/core/pktgen.c

4046

pr_warn("Cannot create thread for cpu %d (%d)\n",

net/core/sysctl_net_core.c

364

pr_warn("bpf_jit_enable = 2 was set! NEVER use this in production, only for JIT debugging!\n");

net/core/utils.c

419

pr_warn("unexpected address family %u\n", addr->ss_family);

net/devlink/core.c

514

pr_warn("Failed to reload devlink instance into init_net\n");

net/ethtool/ioctl.c

1905

pr_warn("Ethtool ioctl interface doesn't support passing EEE linkmodes beyond bit 32\n");

net/handshake/netlink.c

250

pr_warn("handshake: hash initialization failed (%d)\n", ret);

net/handshake/netlink.c

256

pr_warn("handshake: netlink registration failed (%d)\n", ret);

net/handshake/netlink.c

272

pr_warn("handshake: pernet registration failed (%d)\n", ret);

net/ieee802154/socket.c

72

pr_warn("Unsupported ieee802154 address type: %d\n",

net/ipv4/fib_frontend.c

1151

pr_warn("%s: bug: prim == NULL\n", __func__);

net/ipv4/fib_frontend.c

1237

pr_warn("%s: bug: prim == NULL\n", __func__);

net/ipv4/fib_frontend.c

1241

pr_warn("%s: bug: iprim != prim\n", __func__);

net/ipv4/fib_semantics.c

242

pr_warn("Freeing alive fib_info %p\n", fi);

net/ipv4/ipconfig.c

1828

pr_warn("DHCP: vendorclass too long, truncated to \"%s\"\n",

net/ipv4/ipconfig.c

234

pr_warn("DHCP/BOOTP: Ignoring device %s, MTU %d too small\n",

net/ipv4/ipconfig.c

860

pr_warn("Unknown ARP type 0x%04x for device %s\n", dev->type,

net/ipv4/route.c

1798

pr_warn("martian source (src=%pI4, dst=%pI4, dev=%s)\n",

net/ipv4/tcp_input.c

219

pr_warn("%s: Driver has suspect GRO implementation, TCP performance may be compromised.\n",

net/ipv4/tcp_ipv4.c

3493

pr_warn("Failed to allocate TCP ehash (entries: %u) "

net/ipv4/tcp_ipv4.c

3713

pr_warn("Warning: could not register bpf iterator tcp\n");

net/ipv4/udp.c

3936

pr_warn("Failed to allocate UDP hash table (entries: %u) "

net/ipv4/udp.c

4045

pr_warn("Warning: could not register bpf iterator udp\n");

net/ipv6/addrconf.c

1389

pr_warn("%s: regeneration time exceeded - disabled temporary address support\n",

net/ipv6/addrconf.c

6289

pr_warn("BUG: Address %pI6c on device %s is missing its host route.\n",

net/ipv6/addrconf.c

995

pr_warn("Freeing alive inet6 address %p\n", ifp);

net/ipv6/addrconf_core.c

275

pr_warn("Freeing alive inet6 device %p\n", idev);

net/ipv6/ip6_fib.c

1240

pr_warn("NLM_F_CREATE should be set when creating new route\n");

net/ipv6/ip6_fib.c

1302

pr_warn("NLM_F_REPLACE set, but no existing node found!\n");

net/ipv6/ip6_fib.c

1451

pr_warn("RTM_NEWROUTE with no NLM_F_CREATE or NLM_F_REPLACE\n");

net/ipv6/ip6_fib.c

794

pr_warn("Can't replace route, no match found\n");

net/ipv6/ip6_fib.c

797

pr_warn("NLM_F_CREATE should be set when creating new route\n");

net/ipv6/ip6_fib.c

848

pr_warn("Can't replace route, no match found\n");

net/ipv6/ip6_fib.c

851

pr_warn("NLM_F_CREATE should be set when creating new route\n");

net/ipv6/ndisc.c

1920

pr_warn("process `%s' is using deprecated sysctl (%s) net.ipv6.neigh.%s.%s - use net.ipv6.neigh.%s.%s_ms instead\n",

net/ipv6/route.c

3807

pr_warn("NLM_F_CREATE should be specified when creating new route\n");

net/iucv/iucv.c

1813

pr_warn("iucv_external_interrupt: out of memory\n");

net/iucv/iucv.c

488

pr_warn("Defining an interrupt buffer on CPU %i failed with 0x%02x (%s)\n",

net/kcm/kcmsock.c

726

pr_warn("KCM: Hard failure on kcm_write_msgs %d\n", err);

net/kcm/kcmsock.c

915

pr_warn("KCM: Hard failure on kcm_write_msgs\n");

net/mac80211/status.c

666

pr_warn("Unknown status report in ack skb\n");

net/mac80211/util.c

938

pr_warn("queueing ieee80211 work while going to suspend\n");

net/netfilter/ipset/ip_set_core.c

113

pr_warn("Can't find ip_set type %s\n", name);

net/netfilter/ipset/ip_set_core.c

210

pr_warn("ip_set type %s, family %s, revision %u:%u uses wrong protocol version %u (want %u)\n",

net/netfilter/ipset/ip_set_core.c

220

pr_warn("ip_set type %s, family %s with revision min %u already registered!\n",

net/netfilter/ipset/ip_set_core.c

242

pr_warn("ip_set type %s, family %s with revision min %u not registered\n",

net/netfilter/ipset/ip_set_hash_gen.h

1018

pr_warn("Set %s is full, maxelem %u reached\n",

net/netfilter/ipset/ip_set_hash_gen.h

1414

pr_warn("Can't list set %s: one bucket does not fit into a message. Please report it!\n",

net/netfilter/ipset/ip_set_hash_gen.h

801

pr_warn("Cannot increase the hashsize of set %s further\n", set->name);

net/netfilter/xt_connbytes.c

125

pr_warn("Forcing CT accounting to be enabled\n");

net/netfilter/xt_hashlimit.c

1311

pr_warn("unable to create slab cache\n");

net/netlink/af_netlink.c

227

pr_warn("__netlink_remove_tap: %p not found\n", nt);

net/nfc/llcp_core.c

327

pr_warn("Shutting down device not found\n");

net/openvswitch/actions.c

1534

pr_warn("%s: deferred action limit reached, drop sample action\n",

net/openvswitch/actions.c

1537

pr_warn("%s: deferred action limit reached, drop recirc action (recirc_id=%#x)\n",

net/openvswitch/datapath.c

1679

pr_warn("%s: Dropping previously announced user features\n",

net/rds/ib_frmr.c

173

pr_warn("RDS/IB: %s returned error(%d)\n",

net/rds/ib_frmr.c

215

pr_warn("RDS/IB: %s failed!\n", __func__);

net/rds/ib_frmr.c

379

pr_warn("RDS/IB: %s failed (err=%d)\n", __func__, ret);

net/rds/ib_frmr.c

81

pr_warn("RDS/IB: %s failed to allocate MR", __func__);

net/rds/ib_rdma.c

623

pr_warn("RDS/IB: rds_ib_get_mr failed (errno=%d)\n", ret);

net/rds/message.c

357

pr_warn("rds: alloc sgs failed! nents <= 0\n");

net/rds/message.c

362

pr_warn("rds: alloc sgs failed! total %d used %d nents %d\n",

net/rds/rdma_transport.c

128

pr_warn("RDS/RDMA: conn <%pI6c, %pI6c> rejected, dropping connection\n",

net/rds/tcp.c

558

pr_warn("could not set allocate sysctl table\n");

net/rds/tcp.c

568

pr_warn("could not register sysctl\n");

net/rds/tcp.c

579

pr_warn("could not set up IPv6 listen sock\n");

net/rds/tcp.c

693

pr_warn("Invalid input. Must be >= %d\n",

net/rds/tcp_send.c

152

pr_warn("RDS/tcp: send to %pI6c on cp [%d]"

net/rose/rose_link.c

157

pr_warn("ROSE: received diagnostic #%d - %3ph\n", skb->data[3],

net/rxrpc/input.c

496

pr_warn("Packet beyond last: c=%x q=%x window=%x-%x wlimit=%x\n",

net/rxrpc/input_rack.c

416

pr_warn("Unexpected rack timer %u", mode);

net/rxrpc/output.c

213

pr_warn("ack window backward %x %x", window, wtop);

net/rxrpc/output.c

29

pr_warn("AF_INET6 address on AF_INET socket\n");

net/sched/sch_cbs.c

272

pr_warn("Couldn't disable CBS offload for queue %d\n",

net/sched/sch_etf.c

315

pr_warn("Couldn't disable ETF offload for queue %d\n",

net/sched/sch_gred.c

470

pr_warn("GRED: Warning: Destroying shadowed VQ 0x%x\n",

net/sched/sch_htb.c

778

pr_warn("htb: too many events!\n");

net/sched/sch_taprio.c

1312

pr_warn("Link speed %d is too high. Schedule may be inaccurate.\n",

net/sctp/objcnt.c

104

pr_warn("sctp_dbg_objcnt: Unable to create /proc entry.\n");

net/sctp/sm_sideeffect.c

1246

pr_warn("unimplemented feature in state %d, event_type %d, event_id %d\n",

net/sctp/sm_sideeffect.c

1800

pr_warn("Impossible command: %u\n",

net/sctp/sm_statetable.c

56

pr_warn("table %p possible attack: event %d exceeds max %d\n", \

net/sunrpc/auth_gss/svcauth_gss.c

829

pr_warn("svc: duplicate registration of gss pseudo flavour %s.\n",

net/sunrpc/clnt.c

2818

pr_warn("RPC: server %s requires stronger authentication.\n",

net/sunrpc/clnt.c

2972

pr_warn("SUNRPC: reached max allowed number (%d) did not add "

net/sunrpc/rpc_pipe.c

675

pr_warn("%s() failed to create pipe %pd/%s (errno = %d)\n",

net/sunrpc/rpc_pipe.c

876

pr_warn("%s failed to populate directory %pd\n",

net/sunrpc/svc_xprt.c

1059

pr_warn("failed to unregister %s with rpcbind\n",

net/sunrpc/svcauth.c

301

pr_warn("svc: domain %s still present at module unload.\n",

net/sunrpc/sysfs.c

746

pr_warn("can't create link to %s in sysfs (%d)\n",

net/sunrpc/xprtrdma/backchannel.c

270

pr_warn("RPC/RDMA backchannel overflow\n");

net/tipc/bearer.c

301

pr_warn("Bearer <%s>: already 2 bearers with priority %u\n",

net/tipc/bearer.c

310

pr_warn("Bearer <%s>: trying with adjusted priority\n",

net/tipc/bearer.c

372

pr_warn("Enabling of bearer <%s> rejected, %s\n", name, errstr);

net/tipc/bearer.c

453

pr_warn("Failed to obtain node identity\n");

net/tipc/crypto.c

1363

pr_warn("Failed to clone skb for next round if any\n");

net/tipc/crypto.c

1462

pr_warn("%s: key is revoked\n", tx->name);

net/tipc/crypto.c

2373

pr_warn("%s: unable to distr key[%d] to %s, err %d\n",

net/tipc/crypto.c

2387

pr_warn("%s: unable to attach received skey, err %d\n",

net/tipc/discover.c

133

pr_warn("Duplicate %x using %s seen on <%s>\n", node_addr,

net/tipc/group.c

853

pr_warn("Received unknown GROUP_PROTO message\n");

net/tipc/link.c

1034

pr_warn("Too large msg, purging xmit list %d %d %d %d %d!\n",

net/tipc/link.c

1045

pr_warn("%s<%s>, link overflow", link_rst_msg, l->name);

net/tipc/link.c

1215

pr_warn("Retransmission failure on link <%s>\n", l->name);

net/tipc/link.c

1285

pr_warn("Dropping received illegal msg type\n");

net/tipc/link.c

1469

pr_warn("Unexpected skb in deferdq!\n");

net/tipc/link.c

1930

pr_warn("%sunable to create tunnel packet\n", link_co_err);

net/tipc/link.c

1976

pr_warn("%sunable to create dummy SYNCH_MSG\n",

net/tipc/link.c

1997

pr_warn("%sunable to create tunnel packet\n", link_co_err);

net/tipc/link.c

2036

pr_warn("%sunable to frag msg: rc %d\n",

net/tipc/link.c

2057

pr_warn("%sunable to send packet\n", link_co_err);

net/tipc/link.c

2086

pr_warn("Link failover deferdq not empty: %d!\n",

net/tipc/link.c

2122

pr_warn("Link failover deferdq not empty: %d!\n",

net/tipc/monitor.c

456

pr_warn("Mon: unknown link %x/%u DOWN\n", addr, bearer_id);

net/tipc/msg.c

757

pr_warn("Failed do assemble buffer\n");

net/tipc/msg.c

796

pr_warn("Failed do clone local mcast rcv buffer\n");

net/tipc/msg.h

564

pr_warn("Trying to set illegal importance in message\n");

net/tipc/name_distr.c

103

pr_warn("Publication distribution failure\n");

net/tipc/name_distr.c

132

pr_warn("Withdrawal distribution failure\n");

net/tipc/name_distr.c

167

pr_warn("Bulk publication failure\n");

net/tipc/name_table.c

266

pr_warn("Service creation failed, no memory\n");

net/tipc/name_table.c

372

pr_warn("Failed to bind to %u,%u,%u\n",

net/tipc/name_table.c

774

pr_warn("Bind failed, max limit %u reached\n", TIPC_MAX_PUBL);

net/tipc/name_table.c

848

pr_warn("Failed to subscribe for {%u,%u,%u}\n",

net/tipc/node.c

1329

pr_warn("Resetting all links to %x\n", n->addr);

net/tipc/node.c

493

pr_warn("Broadcast rcv link refresh failed, no memory\n");

net/tipc/node.c

540

pr_warn("Node creation failed, no memory\n");

net/tipc/node.c

546

pr_warn("Failed to start crypto RX(%s)!\n", n->peer_id_string);

net/tipc/node.c

583

pr_warn("Broadcast rcv link creation failed, no memory\n");

net/tipc/node.c

665

pr_warn("Node subscribe rejected, unknown node 0x%x\n", addr);

net/tipc/node.c

683

pr_warn("Node unsubscribe rejected, unknown node 0x%x\n", addr);

net/tipc/node.c

703

pr_warn("Connecting sock to node 0x%x failed\n", dnode);

net/tipc/socket.c

1251

pr_warn("Failed to clone mcast rcv buffer\n");

net/tipc/socket.c

1373

pr_warn("Received unknown CONN_PROTO msg\n");

net/tipc/socket.c

504

pr_warn("Socket create failed; port number exhausted\n");

net/tipc/subscr.c

143

pr_warn("Subscription rejected, illegal request\n");

net/tipc/subscr.c

148

pr_warn("Subscription rejected, no memory\n");

net/tipc/topsrv.c

375

pr_warn("Subscription rejected, max (%u)\n", TIPC_MAX_SUBSCR);

net/tipc/udp_media.c

719

pr_warn("Failed to set node id, please configure manually\n");

net/tipc/udp_media.h

55

pr_warn("MTU too low for tipc bearer\n");

net/unix/af_unix.c

3913

pr_warn("Warning: could not register bpf iterator unix\n");

net/vmw_vsock/af_vsock_tap.c

47

pr_warn("vsock_remove_tap: %p not found\n", vt);

net/x25/x25_forward.c

50

pr_warn("call request for lci which is already registered!, transmitting but not registering new pair\n");

net/x25/x25_in.c

329

pr_warn("unknown %02X in state 3\n", frametype);

net/x25/x25_link.c

113

pr_warn("diagnostic #%d - %02X %02X %02X\n",

net/x25/x25_link.c

119

pr_warn("received unknown %02X with LCI 000\n",

samples/ftrace/ftrace-ops.c

161

pr_warn("Counter called %u times (expected %u)\n",

security/integrity/ima/ima_kexec.c

325

pr_warn("IMA: previous kernel measurement buffer %pa (size 0x%zx) lies outside available memory\n",

security/integrity/ima/ima_main.c

1269

pr_warn("Couldn't register LSM notifier, error %d\n", error);

security/integrity/ima/ima_policy.c

1162

pr_warn("rule for LSM \'%s\' is undefined\n",

security/integrity/ima/ima_policy.c

438

pr_warn("rule for LSM \'%s\' is undefined\n",

security/integrity/ima/ima_policy.c

938

pr_warn("Skipping unknown architecture policy rule: %s\n",

security/keys/trusted-keys/trusted_core.c

359

pr_warn("Unsupported RNG. Supported: kernel");

security/keys/trusted-keys/trusted_dcp.c

320

pr_warn("Device neither in secure nor trusted mode!\n");

security/keys/trusted-keys/trusted_dcp.c

337

pr_warn("Test for zero'ed keys failed: %i\n", ret);

security/lsm_init.c

167

pr_warn("exceeded maximum LSM count on %s:%s\n",

security/lsm_init.c

54

pr_warn("failed LSM %s %s initcall with errno %d\n", \

security/safesetid/lsm.c

120

pr_warn("Operation requires CAP_SETUID, which is not available to UID %u for operations besides approved set*uid transitions\n",

security/safesetid/lsm.c

134

pr_warn("Operation requires CAP_SETGID, which is not available to GID %u for operations besides approved set*gid transitions\n",

security/safesetid/lsm.c

173

pr_warn("UID transition ((%d,%d,%d) -> %d) blocked\n",

security/safesetid/lsm.c

177

pr_warn("GID transition ((%d,%d,%d) -> %d) blocked\n",

security/safesetid/securityfs.c

107

pr_warn("insecure policy detected: uid %d is constrained but transitively unconstrained through uid %d\n",

security/safesetid/securityfs.c

111

pr_warn("insecure policy detected: gid %d is constrained but transitively unconstrained through gid %d\n",

security/safesetid/securityfs.c

190

pr_warn("bad policy: duplicate entry\n");

security/safesetid/securityfs.c

226

pr_warn("error: bad policy type");

security/selinux/avc.c

576

pr_warn("SELinux: avc: seqno %d < latest_notif %d\n",

security/selinux/hooks.c

1028

pr_warn("SELinux: Unable to set superblock options before the security server is initialized\n");

security/selinux/hooks.c

1066

pr_warn("SELinux: security_context_str_to_sid (%s) failed with errno=%d\n",

security/selinux/hooks.c

1071

pr_warn(SEL_MOUNT_FAIL_MSG);

security/selinux/hooks.c

1403

pr_warn("SELinux: %s: getxattr returned %d for dev=%s ino=%ld\n",

security/selinux/hooks.c

1421

pr_warn("SELinux: %s: context_to_sid(%s) returned %d for dev=%s ino=%ld\n",

security/selinux/hooks.c

1900

pr_warn("SELinux: %s: unrecognized kind %d\n",

security/selinux/hooks.c

2755

pr_warn("SELinux: unable to change security options "

security/selinux/hooks.c

4695

pr_warn(

security/selinux/hooks.c

4738

pr_warn(

security/selinux/hooks.c

530

pr_warn("SELinux: (dev %s, type %s) has no xattr support\n",

security/selinux/hooks.c

538

pr_warn("SELinux: (dev %s, type %s) has no security xattr handler\n",

security/selinux/hooks.c

542

pr_warn("SELinux: (dev %s, type %s) getxattr errno %d\n",

security/selinux/hooks.c

556

pr_warn("SELinux: (dev %s, type %s) falling back to genfs\n",

security/selinux/hooks.c

674

pr_warn("SELinux: Unable to set superblock options "

security/selinux/hooks.c

767

pr_warn("%s: security_fs_use(%s) returned %d\n",

security/selinux/hooks.c

863

pr_warn("SELinux: defcontext option is "

security/selinux/hooks.c

885

pr_warn("SELinux: mount invalid. Same superblock, different "

security/selinux/hooks.c

917

pr_warn("SELinux: mount invalid. Same superblock, "

security/selinux/netif.c

145

pr_warn("SELinux: failure in %s(), invalid network interface (%d)\n",

security/selinux/netif.c

177

pr_warn("SELinux: failure in %s(), unable to determine network interface label (%d)\n",

security/selinux/netnode.c

235

pr_warn("SELinux: failure in %s(), unable to determine network node label\n",

security/selinux/netport.c

164

pr_warn("SELinux: failure in %s(), unable to determine network port label\n",

security/selinux/ss/policydb.c

1899

pr_warn("SELinux: rangetrans: invalid range\n");

security/selinux/ss/policydb.c

2299

pr_warn("SELinux: void and deprecated fs ocon %s\n",

security/selinux/ss/services.c

2037

pr_warn("SELinux: Context %s would be invalid if enforcing\n",

security/smack/smack_lsm.c

607

pr_warn("Smack: duplicate mount options\n");

security/tomoyo/common.c

971

pr_warn("%s ( %s ) is not permitted to update policies.\n",

security/tomoyo/domain.c

861

pr_warn("ERROR: Domain '%s' not ready.\n", ee->tmp);

security/tomoyo/domain.c

872

pr_warn("ERROR: Domain '%s' not defined.\n", ee->tmp);

security/tomoyo/memory.c

24

pr_warn("ERROR: Out of memory at %s.\n", function);

security/tomoyo/util.c

1102

pr_warn("WARNING: Domain '%s' has too many ACLs to hold. Stopped learning mode.\n",

sound/core/control.c

298

pr_warn("ALSA: Control name '%s' truncated to '%s'\n",

sound/core/control.c

782

pr_warn("ALSA: Renamed control new name '%s' truncated to '%s'\n",

sound/core/pcm_memory.c

116

pr_warn("ALSA pcmC%dD%d%c,%d:%s: cannot preallocate for size %zu\n",

sound/core/seq/seq_clientmgr.c

271

pr_warn("ALSA: seq: Trying to free unused client %d\n",

sound/core/seq/seq_lock.c

17

pr_warn("ALSA: seq_lock: lock trouble [counter = %d] in %s:%d\n", atomic_read(lockp), file, line);

sound/core/seq/seq_lock.c

22

pr_warn("ALSA: seq_lock: waiting [%d left] in %s:%d\n", atomic_read(lockp), file, line);

sound/core/seq/seq_ports.c

127

pr_warn("ALSA: seq: too many ports for client %d\n", client->number);

sound/core/timer.c

974

pr_warn("ALSA: timer %p is busy?\n", timer);

sound/drivers/dummy.c

1071

pr_warn("snd-dummy: Invalid mixer volume level: min=%d, max=%d. Fall back to default value.\n",

sound/isa/ad1816a/ad1816a.c

101

pr_warn("MPU401 device busy, skipping.\n");

sound/pci/ac97/ac97_codec.c

2651

pr_warn("ALSA: AC97 control name '%s %s' truncated to '%s'\n",

sound/pci/ac97/ac97_codec.c

2655

pr_warn("ALSA: AC97 control name '%s' truncated to '%s'\n",

sound/pci/asihpi/asihpi.c

2164

pr_warn("%s: Control %x failed to match mux source %hu %hu\n",

sound/pci/asihpi/asihpi.c

254

pr_warn("in file %s, line %d: HPI error %d\n",

sound/pci/azt3328.c

1222

pr_warn("azf3328: unknown bitrate %d, assuming 44.1kHz!\n", bitrate);

sound/sh/aica.c

78

pr_warn("WARNING: G2 FIFO appears to be blocked.\n");

sound/soc/atmel/atmel-pcm-dma.c

62

pr_warn("atmel-pcm: buffer %s on %s (SSC_SR=%#x)\n",

sound/soc/atmel/atmel-pcm-pdc.c

98

pr_warn("atmel-pcm: buffer %s on %s (SSC_SR=%#x, count=%d)\n",

sound/soc/codecs/rl6231.c

76

pr_warn("Base clock rate %d is too low\n", rate);

sound/soc/codecs/rl6231.c

88

pr_warn("Base clock rate %d is too high\n", rate);

sound/soc/codecs/rt5514.c

501

pr_warn("Base clock rate %d is too low\n", rate);

sound/soc/codecs/wm8903.c

353

pr_warn("DCS mode %d delay not set\n", dcs_mode);

sound/soc/intel/boards/sof_cirrus_common.c

186

pr_warn("Invalid number of cs35l41 amps found: %d, expected 2 or 4\n", sz);

sound/usb/quirks.c

2664

pr_warn("snd_usb_audio: unknown flag %s while parsing param quirk_flags\n",

tools/lib/bpf/btf.c

1193

pr_warn("failed to get EHDR from %s\n", path);

tools/lib/bpf/btf.c

1198

pr_warn("failed to get section names section index for %s\n",

tools/lib/bpf/btf.c

1204

pr_warn("failed to get e_shstrndx from %s\n", path);

tools/lib/bpf/btf.c

1215

pr_warn("failed to get section(%d) header from %s\n",

tools/lib/bpf/btf.c

1221

pr_warn("failed to get section(%d) name from %s\n",

tools/lib/bpf/btf.c

1236

pr_warn("unexpected section type (%d) of section(%d, %s) from %s\n",

tools/lib/bpf/btf.c

1243

pr_warn("failed to get section(%d, %s) data from %s\n",

tools/lib/bpf/btf.c

1266

pr_warn("failed to init libelf for %s\n", path);

tools/lib/bpf/btf.c

1273

pr_warn("failed to open %s: %s\n", path, errstr(err));

tools/lib/bpf/btf.c

1280

pr_warn("failed to open %s as ELF file\n", path);

tools/lib/bpf/btf.c

1289

pr_warn("failed to find '%s' ELF section in %s\n", BTF_ELF_SEC, path);

tools/lib/bpf/btf.c

1329

pr_warn("failed to get ELF class (bitness) for %s\n", path);

tools/lib/bpf/btf.c

1571

pr_warn("BTF loading error: %s\n", errstr(err));

tools/lib/bpf/btf.c

1574

pr_warn("-- BEGIN BTF LOAD LOG ---\n%s\n-- END BTF LOAD LOG --\n", buf);

tools/lib/bpf/btf.c

242

pr_warn("Can't load BTF with non-native endianness due to unsupported header length %u\n",

tools/lib/bpf/btf.c

3341

pr_warn("BTF.ext header missing func_info, line_info\n");

tools/lib/bpf/btf.c

437

pr_warn("BTF type [%d] is malformed\n", btf->start_id + btf->nr_types);

tools/lib/bpf/btf.c

453

pr_warn("BTF types data is malformed\n");

tools/lib/bpf/btf.c

466

pr_warn("btf: type [%u]: invalid %s (string offset %u)\n", type_id, what, str_off);

tools/lib/bpf/btf.c

479

pr_warn("btf: type [%u]: invalid referenced type ID %u\n", ctx_id, id);

tools/lib/bpf/btf.c

5503

pr_warn("kernel BTF is missing at '%s', was CONFIG_DEBUG_INFO_BTF enabled?\n",

tools/lib/bpf/btf.c

5512

pr_warn("failed to read kernel BTF from '%s': %s\n",

tools/lib/bpf/btf.c

5537

pr_warn("failed to find valid kernel BTF\n");

tools/lib/bpf/btf.c

565

pr_warn("btf: type [%u]: referenced type [%u] is not FUNC_PROTO\n", id, t->type);

tools/lib/bpf/btf.c

5684

pr_warn("unexpected reference to base type[%u] of kind [%u] when creating distilled base BTF.\n",

tools/lib/bpf/btf.c

5782

pr_warn("unexpected kind when adding base type '%s'[%u] of kind [%u] to distilled base BTF.\n",

tools/lib/bpf/btf.c

594

pr_warn("btf: type [%u]: unrecognized kind %u\n", id, kind);

tools/lib/bpf/btf.c

877

pr_warn("unsupported BTF_KIND:%u\n", btf_kind(t));

tools/lib/bpf/btf_dump.c

1311

pr_warn("not enough memory for decl stack: %s\n", errstr(err));

tools/lib/bpf/btf_dump.c

1342

pr_warn("unexpected type in decl chain, kind:%u, id:[%u]\n",

tools/lib/bpf/btf_dump.c

1596

pr_warn("unexpected type in decl chain, kind:%u, id:[%u]\n",

tools/lib/bpf/btf_dump.c

1779

pr_warn("unexpected bitfield size %d\n", t->size);

tools/lib/bpf/btf_dump.c

1858

pr_warn("unexpected size %d for id [%u]\n", nr_bytes, id);

tools/lib/bpf/btf_dump.c

1890

pr_warn("unexpected size %d for id [%u]\n", sz, type_id);

tools/lib/bpf/btf_dump.c

1965

pr_warn("unexpected sz %d for id [%u]\n", sz, type_id);

tools/lib/bpf/btf_dump.c

2003

pr_warn("unexpected size %d for id [%u]\n", sz, type_id);

tools/lib/bpf/btf_dump.c

2105

pr_warn("unexpected elem size %zd for array type [%u]\n",

tools/lib/bpf/btf_dump.c

2254

pr_warn("unexpected size %d for enum, id:[%u]\n", t->size, id);

tools/lib/bpf/btf_dump.c

2348

pr_warn("unexpected size [%zu] for id [%u]\n",

tools/lib/bpf/btf_dump.c

2362

pr_warn("unexpected error skipping mods/typedefs for id [%u]\n",

tools/lib/bpf/btf_dump.c

2572

pr_warn("unexpected kind [%u] for id [%u]\n",

tools/lib/bpf/btf_dump.c

501

pr_warn("unsatisfiable type cycle, id:[%u]\n", id);

tools/lib/bpf/btf_dump.c

716

pr_warn("anonymous struct/union loop, id:[%u]\n",

tools/lib/bpf/btf_relocate.c

283

pr_warn("base BTF id [%d] maps to invalid distilled base BTF id [%d]\n",

tools/lib/bpf/btf_relocate.c

352

pr_warn("distilled base BTF type '%s' [%u], size %u has multiple candidates of the same size (ids [%u, %u]) in base BTF\n",

tools/lib/bpf/btf_relocate.c

371

pr_warn("distilled base BTF type '%s' [%d] is not mapped to base BTF id\n",

tools/lib/bpf/btf_relocate.c

400

pr_warn("type [%d], kind [%d] is invalid for distilled base BTF; it is anonymous\n",

tools/lib/bpf/btf_relocate.c

404

pr_warn("type [%d] in distilled based BTF has unexpected kind [%d]\n",

tools/lib/bpf/btf_relocate.c

431

pr_warn("string '%s' [offset %u] is not mapped to base BTF\n",

tools/lib/bpf/elf.c

107

pr_warn("elf: failed to get ehdr from %s: %s\n", binary_path, elf_errmsg(-1));

tools/lib/bpf/elf.c

124

pr_warn("elf: failed to get symbols for symtab section in '%s': %s\n",

tools/lib/bpf/elf.c

147

pr_warn("elf: failed to get verdef ELF section in '%s'\n", binary_path);

tools/lib/bpf/elf.c

286

pr_warn("elf: failed to get ehdr from %s: %s\n", binary_path, elf_errmsg(-1));

tools/lib/bpf/elf.c

33

pr_warn("elf: failed to init libelf for %s\n", binary_path);

tools/lib/bpf/elf.c

336

pr_warn("elf: ambiguous match for '%s', '%s' in '%s'\n",

tools/lib/bpf/elf.c

360

pr_warn("elf: '%s' is 0 in symtab for '%s': %s\n", name, binary_path,

tools/lib/bpf/elf.c

365

pr_warn("elf: failed to find symbol '%s' in '%s'\n", name, binary_path);

tools/lib/bpf/elf.c

39

pr_warn("elf: failed to open %s: %s\n", binary_path, errstr(ret));

tools/lib/bpf/elf.c

44

pr_warn("elf: could not read elf from %s: %s\n", binary_path, elf_errmsg(-1));

tools/lib/bpf/elf.c

466

pr_warn("elf: ambiguous match found '%s@%lu' in '%s' previous offset %lu\n",

tools/lib/bpf/features.c

284

pr_warn("Error in %s(): %s. Couldn't create simple array map.\n",

tools/lib/bpf/features.c

533

pr_warn("Error in %s(): %s. Couldn't create simple array map.\n",

tools/lib/bpf/features.c

546

pr_warn("Error in %s(): Program loading unexpectedly succeeded.\n", __func__);

tools/lib/bpf/features.c

563

pr_warn("Error in %s(): Program unexpectedly failed with message: %s.\n",

tools/lib/bpf/features.c

667

pr_warn("Detection of kernel %s support failed: %s\n",

tools/lib/bpf/features.c

68

pr_warn("Error in %s(): %s. Couldn't create simple array map.\n",

tools/lib/bpf/gen_loader.c

184

pr_warn("Total maps exceeds %d\n", MAX_USED_MAPS);

tools/lib/bpf/gen_loader.c

380

pr_warn("nr_progs %d/%d nr_maps %d/%d mismatch\n",

tools/lib/bpf/gen_loader.c

450

default: pr_warn("unsupported bswap size!\n"); \

tools/lib/bpf/gen_loader.c

768

pr_warn("BTF fd off %d for kfunc %s exceeds INT16_MAX, cannot process relocation\n",

tools/lib/bpf/libbpf.c

10215

pr_warn("struct_ops reloc: failed to get %d reloc\n", i);

tools/lib/bpf/libbpf.c

10221

pr_warn("struct_ops reloc: symbol %zx not found\n",

tools/lib/bpf/libbpf.c

10229

pr_warn("struct_ops reloc: cannot find map at rel->r_offset %zu\n",

tools/lib/bpf/libbpf.c

10245

pr_warn("struct_ops reloc %s: rel->r_offset %zu shdr_idx %u unsupported non-static function\n",

tools/lib/bpf/libbpf.c

10250

pr_warn("struct_ops reloc %s: invalid target program offset %llu\n",

tools/lib/bpf/libbpf.c

10259

pr_warn("struct_ops reloc %s: cannot find member at moff %u\n",

tools/lib/bpf/libbpf.c

10267

pr_warn("struct_ops reloc %s: cannot relocate non func ptr %s\n",

tools/lib/bpf/libbpf.c

10274

pr_warn("struct_ops reloc %s: cannot find prog at shdr_idx %u to relocate func ptr %s\n",

tools/lib/bpf/libbpf.c

10281

pr_warn("struct_ops reloc %s: prog %s is not struct_ops BPF program\n",

tools/lib/bpf/libbpf.c

10364

pr_warn("vmlinux BTF is not found\n");

tools/lib/bpf/libbpf.c

10370

pr_warn("%s is not found in vmlinux BTF\n", name);

tools/lib/bpf/libbpf.c

10386

pr_warn("failed bpf_prog_get_info_by_fd for FD %d: %s\n",

tools/lib/bpf/libbpf.c

10393

pr_warn("The target program doesn't have BTF\n");

tools/lib/bpf/libbpf.c

10399

pr_warn("Failed to get BTF %d of the program: %s\n", info.btf_id, errstr(err));

tools/lib/bpf/libbpf.c

10405

pr_warn("%s is not found in prog's BTF\n", name);

tools/lib/bpf/libbpf.c

10476

pr_warn("prog '%s': attach program FD is not set\n", prog->name);

tools/lib/bpf/libbpf.c

10481

pr_warn("prog '%s': failed to find BPF program (FD %d) BTF ID for '%s': %s\n",

tools/lib/bpf/libbpf.c

10501

pr_warn("prog '%s': failed to find kernel BTF type ID of '%s': %s\n",

tools/lib/bpf/libbpf.c

1063

pr_warn("struct_ops init_kern: struct %s is not found in kernel BTF\n", stname);

tools/lib/bpf/libbpf.c

10661

pr_warn("map '%s': cannot be resized, map value type is not a datasec\n",

tools/lib/bpf/libbpf.c

10669

pr_warn("map '%s': cannot be resized, map value datasec is empty\n",

tools/lib/bpf/libbpf.c

10679

pr_warn("map '%s': cannot be resized, last var must be an array\n",

tools/lib/bpf/libbpf.c

10688

pr_warn("map '%s': cannot be resized, element size (%d) doesn't align with new total size (%u)\n",

tools/lib/bpf/libbpf.c

1070

pr_warn("struct_ops init_kern: struct %s is not found in kernel BTF\n", tname);

tools/lib/bpf/libbpf.c

10730

pr_warn("map '%s': failed to resize memory-mapped region: %s\n",

tools/lib/bpf/libbpf.c

10736

pr_warn("map '%s': failed to adjust resized BTF, clearing BTF key/value info: %s\n",

tools/lib/bpf/libbpf.c

10819

pr_warn("error: unsupported map type\n");

tools/lib/bpf/libbpf.c

10823

pr_warn("error: inner_map_fd already specified\n");

tools/lib/bpf/libbpf.c

10837

pr_warn("exclusive programs must be set before map creation\n");

tools/lib/bpf/libbpf.c

10842

pr_warn("excl_prog and map must be from the same bpf object\n");

tools/lib/bpf/libbpf.c

10868

pr_warn("error in %s: map handler doesn't belong to object\n",

tools/lib/bpf/libbpf.c

1087

pr_warn("struct_ops init_kern: struct %s data is not found in struct %s\n",

tools/lib/bpf/libbpf.c

10940

pr_warn("map '%s': unexpected key size %zu provided, expected %u\n",

tools/lib/bpf/libbpf.c

10946

pr_warn("map '%s': can't use BPF map without FD (was it created?)\n", map->name);

tools/lib/bpf/libbpf.c

10963

pr_warn("map '%s': BPF_F_CPU and BPF_F_ALL_CPUS are mutually exclusive\n",

tools/lib/bpf/libbpf.c

10968

pr_warn("map '%s': unexpected value size %zu provided for either BPF_F_CPU or BPF_F_ALL_CPUS, expected %u\n",

tools/lib/bpf/libbpf.c

10976

pr_warn("map '%s': unexpected value size %zu provided for per-CPU map, expected %d * %zu = %zd\n",

tools/lib/bpf/libbpf.c

10984

pr_warn("map '%s': unexpected value size %zu provided, expected %u\n",

tools/lib/bpf/libbpf.c

11079

pr_warn("prog '%s': can't use BPF program without FD (was it loaded?)\n",

tools/lib/bpf/libbpf.c

11145

pr_warn("failed to open link at %s: %d\n", path, fd);

tools/lib/bpf/libbpf.c

11271

pr_warn("prog '%s': invalid perf event FD %d\n",

tools/lib/bpf/libbpf.c

11277

pr_warn("prog '%s': can't attach BPF program without FD (was it loaded?)\n",

tools/lib/bpf/libbpf.c

11297

pr_warn("prog '%s': failed to create BPF link for perf_event FD %d: %s\n",

tools/lib/bpf/libbpf.c

11304

pr_warn("prog '%s': user context value is not supported\n", prog->name);

tools/lib/bpf/libbpf.c

11311

pr_warn("prog '%s': failed to attach to perf_event FD %d: %s\n",

tools/lib/bpf/libbpf.c

11314

pr_warn("prog '%s': try add PERF_SAMPLE_CALLCHAIN to or remove exclude_callchain_[kernel|user] from pfd %d\n",

tools/lib/bpf/libbpf.c

11324

pr_warn("prog '%s': failed to enable perf_event FD %d: %s\n",

tools/lib/bpf/libbpf.c

11416

pr_warn("failed to determine %s perf type: %s\n",

tools/lib/bpf/libbpf.c

11426

pr_warn("failed to determine %s retprobe bit: %s\n",

tools/lib/bpf/libbpf.c

11561

pr_warn("failed to add legacy kprobe event for '%s+0x%zx': %s\n",

tools/lib/bpf/libbpf.c

11569

pr_warn("failed to determine legacy kprobe event id for '%s+0x%zx': %s\n",

tools/lib/bpf/libbpf.c

11586

pr_warn("legacy kprobe perf_event_open() failed: %s\n",

tools/lib/bpf/libbpf.c

11715

pr_warn("prog '%s': failed to create %s '%s+0x%zx' perf event: %s\n",

tools/lib/bpf/libbpf.c

11725

pr_warn("prog '%s': failed to attach to %s '%s+0x%zx': %s\n",

tools/lib/bpf/libbpf.c

11889

pr_warn("failed to open %s: %s\n", available_functions_file, errstr(err));

tools/lib/bpf/libbpf.c

11901

pr_warn("failed to parse available_filter_functions entry: %d\n", ret);

tools/lib/bpf/libbpf.c

11964

pr_warn("failed to open %s: %s\n", available_path, errstr(err));

tools/lib/bpf/libbpf.c

11974

pr_warn("failed to parse available_filter_functions_addrs entry: %d\n",

tools/lib/bpf/libbpf.c

12022

pr_warn("prog '%s': can't attach BPF program without FD (was it loaded?)\n",

tools/lib/bpf/libbpf.c

12053

pr_warn("prog '%s': failed to find a unique match for '%s' (%zu matches)\n",

tools/lib/bpf/libbpf.c

12087

pr_warn("prog '%s': failed to attach: %s\n",

tools/lib/bpf/libbpf.c

12123

pr_warn("kprobe name is invalid: %s\n", func_name);

tools/lib/bpf/libbpf.c

12128

pr_warn("kretprobes do not support offset specification\n");

tools/lib/bpf/libbpf.c

12181

pr_warn("kprobe multi pattern is invalid: %s\n", spec);

tools/lib/bpf/libbpf.c

12207

pr_warn("kprobe session pattern is invalid: %s\n", spec);

tools/lib/bpf/libbpf.c

1222

pr_warn("struct_ops init_kern %s: failed to resolve the size of member %s\n",

tools/lib/bpf/libbpf.c

12239

pr_warn("prog '%s': invalid format of section definition '%s'\n", prog->name,

tools/lib/bpf/libbpf.c

12283

pr_warn("failed to add legacy uprobe event for %s:0x%zx: %s\n",

tools/lib/bpf/libbpf.c

12290

pr_warn("failed to determine legacy uprobe event id for %s:0x%zx: %s\n",

tools/lib/bpf/libbpf.c

1230

pr_warn("struct_ops init_kern %s: Cannot find member %s in kernel BTF\n",

tools/lib/bpf/libbpf.c

12306

pr_warn("legacy uprobe perf_event_open() failed: %s\n", errstr(err));

tools/lib/bpf/libbpf.c

12337

pr_warn("zip: failed to open %s: %ld\n", archive_path, ret);

tools/lib/bpf/libbpf.c

12343

pr_warn("zip: could not find archive member %s in %s: %ld\n", file_name,

tools/lib/bpf/libbpf.c

12351

pr_warn("zip: entry %s of %s is compressed and cannot be handled\n", file_name,

tools/lib/bpf/libbpf.c

12359

pr_warn("elf: could not read elf file %s from %s: %s\n", file_name, archive_path,

tools/lib/bpf/libbpf.c

12481

pr_warn("prog '%s': can't attach BPF program without FD (was it loaded?)\n",

tools/lib/bpf/libbpf.c

12528

pr_warn("prog '%s': failed to resolve full path for '%s': %s\n",

tools/lib/bpf/libbpf.c

1256

pr_warn("struct_ops init_kern %s: bitfield %s is not supported\n",

tools/lib/bpf/libbpf.c

12571

pr_warn("prog '%s': failed to attach multi-uprobe: %s\n",

tools/lib/bpf/libbpf.c

12623

pr_warn("prog '%s': failed to resolve full path for '%s': %s\n",

tools/lib/bpf/libbpf.c

12688

pr_warn("prog '%s': failed to create %s '%s:0x%zx' perf event: %s\n",

tools/lib/bpf/libbpf.c

1269

pr_warn("struct_ops init_kern %s: Unmatched member type %s %u != %u(kernel)\n",

tools/lib/bpf/libbpf.c

12699

pr_warn("prog '%s': failed to attach to %s '%s:0x%zx': %s\n",

tools/lib/bpf/libbpf.c

12749

pr_warn("prog '%s': section '%s' missing ':function[+offset]' specification\n",

tools/lib/bpf/libbpf.c

12767

pr_warn("prog '%s': uretprobes do not support offset specification\n",

tools/lib/bpf/libbpf.c

12776

pr_warn("prog '%s': invalid format of section definition '%s'\n", prog->name,

tools/lib/bpf/libbpf.c

12812

pr_warn("prog '%s': can't attach BPF program without FD (was it loaded?)\n",

tools/lib/bpf/libbpf.c

12823

pr_warn("prog '%s': failed to resolve full path for '%s': %s\n",

tools/lib/bpf/libbpf.c

12865

pr_warn("invalid section '%s', expected SEC(\"usdt/<path>:<provider>:<name>\")\n",

tools/lib/bpf/libbpf.c

1290

pr_warn("struct_ops init_kern %s: member %s is not a struct_ops program\n",

tools/lib/bpf/libbpf.c

12906

pr_warn("failed to determine tracepoint '%s/%s' perf event ID: %s\n",

tools/lib/bpf/libbpf.c

12921

pr_warn("tracepoint '%s/%s' perf_event_open() failed: %s\n",

tools/lib/bpf/libbpf.c

12945

pr_warn("prog '%s': failed to create tracepoint '%s/%s' perf event: %s\n",

tools/lib/bpf/libbpf.c

12954

pr_warn("prog '%s': failed to attach to tracepoint '%s/%s': %s\n",

tools/lib/bpf/libbpf.c

13015

pr_warn("prog '%s': can't attach before loaded\n", prog->name);

tools/lib/bpf/libbpf.c

13030

pr_warn("prog '%s': failed to attach to raw tracepoint '%s': %s\n",

tools/lib/bpf/libbpf.c

1304

pr_warn("struct_ops init_kern %s: kernel member %s is not a func ptr\n",

tools/lib/bpf/libbpf.c

13076

pr_warn("prog '%s': invalid section name '%s'\n",

tools/lib/bpf/libbpf.c

13098

pr_warn("prog '%s': can't attach before loaded\n", prog->name);

tools/lib/bpf/libbpf.c

13113

pr_warn("prog '%s': failed to attach: %s\n",

tools/lib/bpf/libbpf.c

13160

pr_warn("prog '%s': can't attach before loaded\n", prog->name);

tools/lib/bpf/libbpf.c

13174

pr_warn("prog '%s': failed to attach to %s: %s\n",

tools/lib/bpf/libbpf.c

13222

pr_warn("prog '%s': relative_fd and relative_id cannot be set at the same time\n",

tools/lib/bpf/libbpf.c

13251

pr_warn("prog '%s': target netdevice ifindex cannot be zero\n",

tools/lib/bpf/libbpf.c

13256

pr_warn("prog '%s': relative_fd and relative_id cannot be set at the same time\n",

tools/lib/bpf/libbpf.c

1326

pr_warn("struct_ops init_kern %s func ptr %s: invalid reuse of prog %s in sec %s with type %u: attach_btf_id %u != kern_type_id %u\n",

tools/lib/bpf/libbpf.c

13286

pr_warn("prog '%s': target netdevice ifindex cannot be zero\n",

tools/lib/bpf/libbpf.c

13291

pr_warn("prog '%s': relative_fd and relative_id cannot be set at the same time\n",

tools/lib/bpf/libbpf.c

13311

pr_warn("prog '%s': supply none or both of target_fd and attach_func_name\n",

tools/lib/bpf/libbpf.c

13317

pr_warn("prog '%s': only BPF_PROG_TYPE_EXT can attach as freplace\n",

tools/lib/bpf/libbpf.c

1332

pr_warn("struct_ops init_kern %s func ptr %s: invalid reuse of prog %s in sec %s with type %u: expected_attach_type %u != kern_member_idx %u\n",

tools/lib/bpf/libbpf.c

13358

pr_warn("prog '%s': can't attach before loaded\n", prog->name);

tools/lib/bpf/libbpf.c

13372

pr_warn("prog '%s': failed to attach to iterator: %s\n",

tools/lib/bpf/libbpf.c

13398

pr_warn("prog '%s': can't attach before loaded\n", prog->name);

tools/lib/bpf/libbpf.c

13417

pr_warn("prog '%s': failed to attach to netfilter: %s\n",

tools/lib/bpf/libbpf.c

13435

pr_warn("prog '%s': can't attach BPF program without FD (was it loaded?)\n",

tools/lib/bpf/libbpf.c

13481

pr_warn("map '%s': can't attach non-struct_ops map\n", map->name);

tools/lib/bpf/libbpf.c

13486

pr_warn("map '%s': can't attach BPF map without FD (was it created?)\n", map->name);

tools/lib/bpf/libbpf.c

1349

pr_warn("struct_ops init_kern %s: Error in size of member %s: %zd != %zd(kernel)\n",

tools/lib/bpf/libbpf.c

13540

pr_warn("map '%s': can't use BPF map without FD (was it created?)\n", map->name);

tools/lib/bpf/libbpf.c

13717

pr_warn("failed to open perf buffer event on cpu #%d: %s\n",

tools/lib/bpf/libbpf.c

13728

pr_warn("failed to mmap perf buffer on cpu #%d: %s\n",

tools/lib/bpf/libbpf.c

13735

pr_warn("failed to enable perf buffer event on cpu #%d: %s\n",

tools/lib/bpf/libbpf.c

13817

pr_warn("page count should be power of two, but is %zu\n",

tools/lib/bpf/libbpf.c

13832

pr_warn("failed to get map info for map FD %d: %s\n",

tools/lib/bpf/libbpf.c

13840

pr_warn("map '%s' should be BPF_MAP_TYPE_PERF_EVENT_ARRAY\n",

tools/lib/bpf/libbpf.c

13862

pr_warn("failed to create epoll instance: %s\n",

tools/lib/bpf/libbpf.c

13882

pr_warn("failed to allocate events: out of memory\n");

tools/lib/bpf/libbpf.c

13888

pr_warn("failed to allocate buffers: out of memory\n");

tools/lib/bpf/libbpf.c

13894

pr_warn("failed to get online CPU mask: %s\n", errstr(err));

tools/lib/bpf/libbpf.c

13923

pr_warn("failed to set cpu #%d, key %d -> perf FD %d: %s\n",

tools/lib/bpf/libbpf.c

13934

pr_warn("failed to epoll_ctl cpu #%d perf FD %d: %s\n",

tools/lib/bpf/libbpf.c

13993

pr_warn("unknown perf sample type %d\n", e->type);

tools/lib/bpf/libbpf.c

14031

pr_warn("error while processing records: %s\n", errstr(err));

tools/lib/bpf/libbpf.c

1406

pr_warn("struct_ops init: DATASEC %s not found\n",

tools/lib/bpf/libbpf.c

14115

pr_warn("perf_buffer: failed to process records in buffer #%d: %s\n",

tools/lib/bpf/libbpf.c

14176

pr_warn("prog '%s': can't associate BPF program without FD (was it loaded?)\n",

tools/lib/bpf/libbpf.c

14182

pr_warn("prog '%s': can't associate struct_ops program\n", prog->name);

tools/lib/bpf/libbpf.c

14188

pr_warn("map '%s': can't associate BPF map without FD (was it created?)\n", map->name);

tools/lib/bpf/libbpf.c

1419

pr_warn("struct_ops init: Cannot resolve var type_id %u in DATASEC %s\n",

tools/lib/bpf/libbpf.c

14193

pr_warn("map '%s': can't associate non-struct_ops map\n", map->name);

tools/lib/bpf/libbpf.c

14216

pr_warn("Failed to get CPU range %s: %d\n", s, n);

tools/lib/bpf/libbpf.c

14223

pr_warn("Invalid CPU range [%d,%d] in %s\n",

tools/lib/bpf/libbpf.c

14240

pr_warn("Empty CPU range\n");

tools/lib/bpf/libbpf.c

14258

pr_warn("Failed to open cpu mask file %s: %s\n", fcpu, errstr(err));

tools/lib/bpf/libbpf.c

14265

pr_warn("Failed to read cpu mask from %s: %s\n", fcpu, errstr(err));

tools/lib/bpf/libbpf.c

14269

pr_warn("CPU mask is too big in file %s\n", fcpu);

tools/lib/bpf/libbpf.c

1427

pr_warn("struct_ops init: anonymous type is not supported\n");

tools/lib/bpf/libbpf.c

1431

pr_warn("struct_ops init: %s is not a struct\n", tname);

tools/lib/bpf/libbpf.c

14317

pr_warn("failed to find skeleton map '%s'\n", name);

tools/lib/bpf/libbpf.c

14341

pr_warn("failed to find skeleton program '%s'\n", name);

tools/lib/bpf/libbpf.c

14357

pr_warn("failed to initialize skeleton BPF object '%s': %s\n",

tools/lib/bpf/libbpf.c

14365

pr_warn("failed to populate skeleton maps for '%s': %s\n", s->name, errstr(err));

tools/lib/bpf/libbpf.c

14371

pr_warn("failed to populate skeleton progs for '%s': %s\n", s->name, errstr(err));

tools/lib/bpf/libbpf.c

14394

pr_warn("subskeletons require BTF at runtime (object %s)\n",

tools/lib/bpf/libbpf.c

14401

pr_warn("failed to populate subskeleton maps: %s\n", errstr(err));

tools/lib/bpf/libbpf.c

14407

pr_warn("failed to populate subskeleton maps: %s\n", errstr(err));

tools/lib/bpf/libbpf.c

14418

pr_warn("type for map '%1$s' is not a datasec: %2$s\n",

tools/lib/bpf/libbpf.c

14454

pr_warn("failed to load BPF skeleton '%s': %s\n", s->name, errstr(err));

tools/lib/bpf/libbpf.c

14496

pr_warn("prog '%s': failed to auto-attach: %s\n",

tools/lib/bpf/libbpf.c

14528

pr_warn("map '%s': BPF skeleton version is old, skipping map auto-attachment...\n",

tools/lib/bpf/libbpf.c

14535

pr_warn("map '%s': BPF map skeleton link is uninitialized\n",

tools/lib/bpf/libbpf.c

14546

pr_warn("map '%s': failed to auto-attach: %s\n",

tools/lib/bpf/libbpf.c

1474

pr_warn("struct_ops init: var %s is beyond the end of DATASEC %s\n",

tools/lib/bpf/libbpf.c

1524

pr_warn("alloc memory failed for %s\n", path);

tools/lib/bpf/libbpf.c

1583

pr_warn("elf: init internal error\n");

tools/lib/bpf/libbpf.c

1594

pr_warn("elf: failed to open %s: %s\n", obj->path, errstr(err));

tools/lib/bpf/libbpf.c

1602

pr_warn("elf: failed to open %s as ELF file: %s\n", obj->path, elf_errmsg(-1));

tools/lib/bpf/libbpf.c

1611

pr_warn("elf: '%s' is not a proper ELF object\n", obj->path);

tools/lib/bpf/libbpf.c

1617

pr_warn("elf: '%s' is not a 64-bit ELF object\n", obj->path);

tools/lib/bpf/libbpf.c

1623

pr_warn("elf: failed to get ELF header from %s: %s\n", obj->path, elf_errmsg(-1));

tools/lib/bpf/libbpf.c

1632

pr_warn("elf: '%s' has unknown byte order\n", obj->path);

tools/lib/bpf/libbpf.c

1639

pr_warn("elf: failed to get section names section index for %s: %s\n",

tools/lib/bpf/libbpf.c

1647

pr_warn("elf: failed to get section names strings from %s: %s\n",

tools/lib/bpf/libbpf.c

1655

pr_warn("elf: %s is not a valid eBPF object file\n", obj->path);

tools/lib/bpf/libbpf.c

1681

pr_warn("invalid license section in %s\n", obj->path);

tools/lib/bpf/libbpf.c

1698

pr_warn("invalid kver section in %s\n", obj->path);

tools/lib/bpf/libbpf.c

1751

pr_warn("failed to get sym name string for var %s\n", name);

tools/lib/bpf/libbpf.c

2003

pr_warn("failed to alloc map '%s' content buffer: %s\n", map->name, errstr(err));

tools/lib/bpf/libbpf.c

2098

pr_warn("extern (kcfg) '%s': value '%c' implies tristate or char type\n",

tools/lib/bpf/libbpf.c

2119

pr_warn("extern (kcfg) '%s': value '%c' implies bool, tristate, or char type\n",

tools/lib/bpf/libbpf.c

2133

pr_warn("extern (kcfg) '%s': value '%s' implies char array type\n",

tools/lib/bpf/libbpf.c

2140

pr_warn("extern (kcfg) '%s': invalid string config '%s'\n",

tools/lib/bpf/libbpf.c

2148

pr_warn("extern (kcfg) '%s': long string '%s' of (%zu bytes) truncated to %d bytes\n",

tools/lib/bpf/libbpf.c

2167

pr_warn("failed to parse '%s': %s\n", value, errstr(err));

tools/lib/bpf/libbpf.c

2171

pr_warn("failed to parse '%s' as integer completely\n", value);

tools/lib/bpf/libbpf.c

2207

pr_warn("extern (kcfg) '%s': value '%llu' implies integer, char, or boolean type\n",

tools/lib/bpf/libbpf.c

2212

pr_warn("extern (kcfg) '%s': value '%llu' isn't boolean compatible\n",

tools/lib/bpf/libbpf.c

2218

pr_warn("extern (kcfg) '%s': value '%llu' doesn't fit in %d bytes\n",

tools/lib/bpf/libbpf.c

2256

pr_warn("failed to parse '%s': no separator\n", buf);

tools/lib/bpf/libbpf.c

2268

pr_warn("failed to parse '%s': no value\n", buf);

tools/lib/bpf/libbpf.c

2290

pr_warn("extern (kcfg) '%s': value '%s' isn't a valid integer\n", ext->name, value);

tools/lib/bpf/libbpf.c

2294

pr_warn("extern (kcfg) '%s': value '%s' implies integer type\n", ext->name, value);

tools/lib/bpf/libbpf.c

2326

pr_warn("failed to open system Kconfig\n");

tools/lib/bpf/libbpf.c

2333

pr_warn("error parsing system Kconfig line '%s': %s\n",

tools/lib/bpf/libbpf.c

2354

pr_warn("failed to open in-memory Kconfig: %s\n", errstr(err));

tools/lib/bpf/libbpf.c

2361

pr_warn("error parsing in-memory Kconfig line '%s': %s\n",

tools/lib/bpf/libbpf.c

2477

pr_warn("map '%s': attr '%s': expected PTR, got %s.\n",

tools/lib/bpf/libbpf.c

2484

pr_warn("map '%s': attr '%s': type [%u] not found.\n",

tools/lib/bpf/libbpf.c

2489

pr_warn("map '%s': attr '%s': expected ARRAY, got %s.\n",

tools/lib/bpf/libbpf.c

2515

pr_warn("map '%s': attr '%s': expected ENUM or ENUM64, got %s.\n",

tools/lib/bpf/libbpf.c

2521

pr_warn("map '%s': attr '%s': invalid __ulong\n",

tools/lib/bpf/libbpf.c

2588

pr_warn("map '%s': invalid field #%d.\n", map_name, i);

tools/lib/bpf/libbpf.c

2613

pr_warn("map '%s': conflicting key size %u != %u.\n",

tools/lib/bpf/libbpf.c

2624

pr_warn("map '%s': key type [%d] not found.\n",

tools/lib/bpf/libbpf.c

2629

pr_warn("map '%s': key spec is not PTR: %s.\n",

tools/lib/bpf/libbpf.c

2635

pr_warn("map '%s': can't determine key size for type [%u]: %zd.\n",

tools/lib/bpf/libbpf.c

2640

pr_warn("map '%s': conflicting key size %u != %zd.\n",

tools/lib/bpf/libbpf.c

2653

pr_warn("map '%s': conflicting value size %u != %u.\n",

tools/lib/bpf/libbpf.c

2664

pr_warn("map '%s': value type [%d] not found.\n",

tools/lib/bpf/libbpf.c

2669

pr_warn("map '%s': value spec is not PTR: %s.\n",

tools/lib/bpf/libbpf.c

2675

pr_warn("map '%s': can't determine value size for type [%u]: %zd.\n",

tools/lib/bpf/libbpf.c

2680

pr_warn("map '%s': conflicting value size %u != %zd.\n",

tools/lib/bpf/libbpf.c

2696

pr_warn("map '%s': multi-level inner maps not supported.\n",

tools/lib/bpf/libbpf.c

2701

pr_warn("map '%s': '%s' member should be last.\n",

tools/lib/bpf/libbpf.c

2706

pr_warn("map '%s': should be map-in-map or prog-array.\n",

tools/lib/bpf/libbpf.c

2711

pr_warn("map '%s': conflicting value size %u != 4.\n",

tools/lib/bpf/libbpf.c

2718

pr_warn("map '%s': %s type [%d] not found.\n",

tools/lib/bpf/libbpf.c

2723

pr_warn("map '%s': %s spec is not a zero-sized array.\n",

tools/lib/bpf/libbpf.c

2729

pr_warn("map '%s': %s def is of unexpected kind %s.\n",

tools/lib/bpf/libbpf.c

2736

pr_warn("map '%s': prog-array value def is of unexpected kind %s.\n",

tools/lib/bpf/libbpf.c

2743

pr_warn("map '%s': map-in-map inner def is of unexpected kind %s.\n",

tools/lib/bpf/libbpf.c

2758

pr_warn("map '%s': inner def can't be pinned.\n", map_name);

tools/lib/bpf/libbpf.c

2764

pr_warn("map '%s': invalid pinning value %u.\n",

tools/lib/bpf/libbpf.c

2779

pr_warn("map '%s': unknown field '%s'.\n", map_name, name);

tools/lib/bpf/libbpf.c

2787

pr_warn("map '%s': map type isn't specified.\n", map_name);

tools/lib/bpf/libbpf.c

2909

pr_warn("map #%d: empty name.\n", var_idx);

tools/lib/bpf/libbpf.c

2913

pr_warn("map '%s' BTF data is corrupted.\n", map_name);

tools/lib/bpf/libbpf.c

2917

pr_warn("map '%s': unexpected var kind %s.\n",

tools/lib/bpf/libbpf.c

2922

pr_warn("map '%s': unsupported map linkage %s.\n",

tools/lib/bpf/libbpf.c

2929

pr_warn("map '%s': unexpected def kind %s.\n",

tools/lib/bpf/libbpf.c

2934

pr_warn("map '%s': invalid def size.\n", map_name);

tools/lib/bpf/libbpf.c

2943

pr_warn("map '%s': failed to alloc map name.\n", map_name);

tools/lib/bpf/libbpf.c

2963

pr_warn("map '%s': couldn't build pin path.\n", map->name);

tools/lib/bpf/libbpf.c

3001

pr_warn("elf: sec '%s': declared ARENA map size (%zu) is too small to hold global __arena variables of size %zu\n",

tools/lib/bpf/libbpf.c

3034

pr_warn("elf: failed to get %s map definitions for %s\n",

tools/lib/bpf/libbpf.c

3053

pr_warn("DATASEC '%s' not found.\n", MAPS_ELF_SEC);

tools/lib/bpf/libbpf.c

3074

pr_warn("map '%s': only single ARENA map is supported (map '%s' is also ARENA)\n",

tools/lib/bpf/libbpf.c

3089

pr_warn("elf: sec '%s': to use global __arena variables the ARENA map should be explicitly declared in SEC(\".maps\")\n",

tools/lib/bpf/libbpf.c

318

pr_warn("permission error while running as root; try raising 'ulimit -l'? current value: %s\n",

tools/lib/bpf/libbpf.c

3278

pr_warn("Error loading ELF section %s: %s.\n", BTF_ELF_SEC, errstr(err));

tools/lib/bpf/libbpf.c

3296

pr_warn("Error loading ELF section %s: %s. Ignored and continue.\n",

tools/lib/bpf/libbpf.c

3341

pr_warn("BTF is required, but is missing or corrupted.\n");

tools/lib/bpf/libbpf.c

3544

pr_warn("Error loading vmlinux BTF: %s\n", errstr(err));

tools/lib/bpf/libbpf.c

3648

pr_warn("Error loading .BTF into kernel: %s. BTF is mandatory, can't proceed.\n",

tools/lib/bpf/libbpf.c

3665

pr_warn("elf: failed to get section name string at offset %zu from %s: %s\n",

tools/lib/bpf/libbpf.c

3679

pr_warn("elf: failed to get section name string at offset %zu from %s: %s\n",

tools/lib/bpf/libbpf.c

3693

pr_warn("elf: failed to get section(%zu) from %s: %s\n",

tools/lib/bpf/libbpf.c

3728

pr_warn("elf: failed to get section(%zu) header from %s: %s\n",

tools/lib/bpf/libbpf.c

3750

pr_warn("elf: failed to get section(%zu) name from %s: %s\n",

tools/lib/bpf/libbpf.c

3767

pr_warn("elf: failed to get section(%zu) %s data from %s: %s\n",

tools/lib/bpf/libbpf.c

3862

pr_warn("elf: failed to get the number of sections for %s: %s\n",

tools/lib/bpf/libbpf.c

3881

pr_warn("elf: multiple symbol tables in %s\n", obj->path);

tools/lib/bpf/libbpf.c

3898

pr_warn("elf: couldn't find symbol table in %s, stripped object file?\n",

tools/lib/bpf/libbpf.c

3937

pr_warn("elf: legacy map definitions in 'maps' section are not supported by libbpf v1.0+\n");

tools/lib/bpf/libbpf.c

4025

pr_warn("elf: symbol strings section missing or invalid in %s\n", obj->path);

tools/lib/bpf/libbpf.c

4243

pr_warn("cannot create a dummy_ksym var\n");

tools/lib/bpf/libbpf.c

4296

pr_warn("failed to find BTF for extern '%s': %d\n",

tools/lib/bpf/libbpf.c

4317

pr_warn("failed to find BTF for extern '%s' [%d] section: %d\n",

tools/lib/bpf/libbpf.c

4326

pr_warn("extern function %s is unsupported under %s section\n",

tools/lib/bpf/libbpf.c

4334

pr_warn("failed to resolve size of extern (kcfg) '%s': %d\n",

tools/lib/bpf/libbpf.c

4340

pr_warn("failed to determine alignment of extern (kcfg) '%s': %d\n",

tools/lib/bpf/libbpf.c

4347

pr_warn("extern (kcfg) '%s': type is unsupported\n", ext_name);

tools/lib/bpf/libbpf.c

4356

pr_warn("unrecognized extern section '%s'\n", sec_name);

tools/lib/bpf/libbpf.c

4403

pr_warn("failed to find extern definition for BTF %s '%s'\n",

tools/lib/bpf/libbpf.c

4458

pr_warn("failed to find extern definition for BTF var '%s'\n",

tools/lib/bpf/libbpf.c

4578

pr_warn("prog '%s': invalid relo against '%s' for insns[%d].code 0x%x\n",

tools/lib/bpf/libbpf.c

4594

pr_warn("prog '%s': extern relo failed to find extern for '%s' (%d)\n",

tools/lib/bpf/libbpf.c

4612

pr_warn("prog '%s': incorrect bpf_call opcode\n", prog->name);

tools/lib/bpf/libbpf.c

4618

pr_warn("prog '%s': bad call relo against '%s' in section '%s'\n",

tools/lib/bpf/libbpf.c

4623

pr_warn("prog '%s': bad call relo against '%s' at offset %zu\n",

tools/lib/bpf/libbpf.c

4634

pr_warn("prog '%s': invalid relo against '%s' in special section 0x%x; forgot to initialize global var?..\n",

tools/lib/bpf/libbpf.c

4645

pr_warn("prog '%s': bad subprog addr relo against '%s' at offset %zu+%d\n",

tools/lib/bpf/libbpf.c

4662

pr_warn("prog '%s': bad arena data relocation at insn %u, no arena maps defined\n",

tools/lib/bpf/libbpf.c

4691

pr_warn("prog '%s': bad map relo against '%s' in section '%s'\n",

tools/lib/bpf/libbpf.c

4707

pr_warn("prog '%s': map relo failed to find map for section '%s', off %zu\n",

tools/lib/bpf/libbpf.c

4720

pr_warn("prog '%s': bad data relo against section '%s'\n",

tools/lib/bpf/libbpf.c

4734

pr_warn("prog '%s': data relo failed to find map for section '%s'\n",

tools/lib/bpf/libbpf.c

4815

pr_warn("sec '%s': failed to get relo #%d\n", relo_sec_name, i);

tools/lib/bpf/libbpf.c

4822

pr_warn("sec '%s': symbol #%zu not found for relo #%d\n",

tools/lib/bpf/libbpf.c

4828

pr_warn("sec '%s': corrupted symbol #%zu pointing to invalid section #%zu for relo #%d\n",

tools/lib/bpf/libbpf.c

4834

pr_warn("sec '%s': invalid offset 0x%zx for relo #%d\n",

tools/lib/bpf/libbpf.c

4923

pr_warn("failed to open %s: %s. No procfs support?\n", file,

tools/lib/bpf/libbpf.c

5134

pr_warn("Failed to bump RLIMIT_MEMLOCK (err = %s), you might need to do it explicitly!\n",

tools/lib/bpf/libbpf.c

5143

pr_warn("Error in %s(): %s. Couldn't load trivial BPF program. Make sure your kernel supports BPF (CONFIG_BPF_SYSCALL=y) and/or that RLIMIT_MEMLOCK is set to big enough value.\n",

tools/lib/bpf/libbpf.c

5177

pr_warn("failed to get map info for map FD %d: %s\n", map_fd,

tools/lib/bpf/libbpf.c

5214

pr_warn("couldn't retrieve pinned map '%s': %s\n",

tools/lib/bpf/libbpf.c

5220

pr_warn("couldn't reuse pinned map at '%s': parameter mismatch\n",

tools/lib/bpf/libbpf.c

5255

pr_warn("map '%s': failed to set initial contents: %s\n",

tools/lib/bpf/libbpf.c

5265

pr_warn("map '%s': failed to freeze as read-only: %s\n",

tools/lib/bpf/libbpf.c

5292

pr_warn("map '%s': failed to re-mmap() contents: %s\n",

tools/lib/bpf/libbpf.c

5353

pr_warn("map '%s': failed to create inner map: %s\n",

tools/lib/bpf/libbpf.c

5409

pr_warn("Error in bpf_create_map_xattr(%s): %s. Retrying without BTF.\n",

tools/lib/bpf/libbpf.c

5465

pr_warn("map '%s': failed to initialize slot [%d] to map '%s' fd=%d: %s\n",

tools/lib/bpf/libbpf.c

5498

pr_warn("map '%s': failed to initialize slot [%d] to prog '%s' fd=%d: %s\n",

tools/lib/bpf/libbpf.c

5537

pr_warn("map '%s': failed to determine number of system CPUs: %d\n",

tools/lib/bpf/libbpf.c

5590

pr_warn("map '%s': error reusing pinned map\n",

tools/lib/bpf/libbpf.c

5595

pr_warn("map '%s': cannot find pinned map\n",

tools/lib/bpf/libbpf.c

5625

pr_warn("map '%s': failed to mmap arena: %s\n",

tools/lib/bpf/libbpf.c

5649

pr_warn("map '%s': failed to auto-pin at '%s': %s\n",

tools/lib/bpf/libbpf.c

5659

pr_warn("map '%s': failed to create: %s\n", map->name, errstr(err));

tools/lib/bpf/libbpf.c

5783

pr_warn("failed to iterate BTF objects: %s\n", errstr(err));

tools/lib/bpf/libbpf.c

5792

pr_warn("failed to get BTF object #%d FD: %s\n", id, errstr(err));

tools/lib/bpf/libbpf.c

5804

pr_warn("failed to get BTF object #%d info: %s\n", id, errstr(err));

tools/lib/bpf/libbpf.c

5817

pr_warn("failed to load module [%s]'s BTF object #%d: %s\n",

tools/lib/bpf/libbpf.c

6010

pr_warn("prog '%s': relo #%d: target candidate search failed for [%d] %s %s: %ld\n",

tools/lib/bpf/libbpf.c

6047

pr_warn("failed to parse target BTF: %s\n", errstr(err));

tools/lib/bpf/libbpf.c

6107

pr_warn("prog '%s': relo #%d: failed to record relocation: %s\n",

tools/lib/bpf/libbpf.c

6117

pr_warn("prog '%s': relo #%d: failed to relocate: %s\n",

tools/lib/bpf/libbpf.c

6124

pr_warn("prog '%s': relo #%d: failed to patch insn #%u: %s\n",

tools/lib/bpf/libbpf.c

6267

pr_warn("map '.jumptables': jumptable start %u should be multiple of %u\n",

tools/lib/bpf/libbpf.c

6273

pr_warn("map '.jumptables': jumptable size %d should be multiple of %u\n",

tools/lib/bpf/libbpf.c

6284

pr_warn("map '.jumptables': ELF file is missing jump table data\n");

tools/lib/bpf/libbpf.c

6289

pr_warn("map '.jumptables': jumptables_data size is %zd, trying to access %d\n",

tools/lib/bpf/libbpf.c

6297

pr_warn("map '.jumptables': invalid instruction index %d\n", relo->insn_idx);

tools/lib/bpf/libbpf.c

6323

pr_warn("map '.jumptables': invalid jump table value 0x%llx at offset %u\n",

tools/lib/bpf/libbpf.c

6433

pr_warn("prog '%s': relo #%d: bad insn\n",

tools/lib/bpf/libbpf.c

6450

pr_warn("prog '%s': relo #%d: can't create jump table: sym_off %u\n",

tools/lib/bpf/libbpf.c

6460

pr_warn("prog '%s': relo #%d: bad relo type %d\n",

tools/lib/bpf/libbpf.c

6562

pr_warn("prog '%s': error relocating .BTF.ext function info: %s\n",

tools/lib/bpf/libbpf.c

6571

pr_warn("prog '%s': missing .BTF.ext function info.\n", prog->name);

tools/lib/bpf/libbpf.c

6575

pr_warn("prog '%s': missing .BTF.ext function info for the main program, skipping all of .BTF.ext func info.\n",

tools/lib/bpf/libbpf.c

6590

pr_warn("prog '%s': error relocating .BTF.ext line info: %s\n",

tools/lib/bpf/libbpf.c

6599

pr_warn("prog '%s': missing .BTF.ext line info.\n", prog->name);

tools/lib/bpf/libbpf.c

6603

pr_warn("prog '%s': missing .BTF.ext line info for the main program, skipping all of .BTF.ext line info.\n",

tools/lib/bpf/libbpf.c

6687

pr_warn("prog '%s': failed to realloc prog code\n", main_prog->name);

tools/lib/bpf/libbpf.c

6706

pr_warn("prog '%s': failed to add subprog offsets: %s\n",

tools/lib/bpf/libbpf.c

6740

pr_warn("prog '%s': unexpected relo for insn #%zu, type %d\n",

tools/lib/bpf/libbpf.c

6764

pr_warn("prog '%s': missing subprog addr relo for insn #%zu\n",

tools/lib/bpf/libbpf.c

6780

pr_warn("prog '%s': no .text section found yet sub-program call exists\n",

tools/lib/bpf/libbpf.c

6995

pr_warn("prog '%s': exception_callback:<value> decl tag not applied to the main program\n",

tools/lib/bpf/libbpf.c

7012

pr_warn("prog '%s': exception_callback:<value> decl tag contains empty value\n",

tools/lib/bpf/libbpf.c

7029

pr_warn("prog '%s': exception callback %s must be a global non-hidden function\n",

tools/lib/bpf/libbpf.c

7035

pr_warn("prog '%s': multiple subprogs with same name as exception callback '%s'\n",

tools/lib/bpf/libbpf.c

7046

pr_warn("prog '%s': cannot find exception callback '%s'\n", prog->name, name);

tools/lib/bpf/libbpf.c

7159

pr_warn("prog '%s': subprog '%s' arg#%d is expected to be of `struct %s *` type\n",

tools/lib/bpf/libbpf.c

7381

pr_warn("failed to perform CO-RE relocations: %s\n",

tools/lib/bpf/libbpf.c

7434

pr_warn("prog '%s': failed to relocate calls: %s\n",

tools/lib/bpf/libbpf.c

7471

pr_warn("prog '%s': failed to relocate data references: %s\n",

tools/lib/bpf/libbpf.c

7479

pr_warn("prog '%s': failed to perform .BTF.ext fix ups: %s\n",

tools/lib/bpf/libbpf.c

7518

pr_warn(".maps relo #%d: failed to get ELF relo\n", i);

tools/lib/bpf/libbpf.c

7524

pr_warn(".maps relo #%d: symbol %zx not found\n",

tools/lib/bpf/libbpf.c

7545

pr_warn(".maps relo #%d: cannot find map '%s' at rel->r_offset %zu\n",

tools/lib/bpf/libbpf.c

7555

pr_warn(".maps relo #%d: '%s' isn't a BTF-defined map\n",

tools/lib/bpf/libbpf.c

7561

pr_warn(".maps relo #%d: hash-of-maps '%s' should have key size %zu.\n",

tools/lib/bpf/libbpf.c

7567

pr_warn(".maps relo #%d: '%s' isn't a valid map reference\n",

tools/lib/bpf/libbpf.c

7574

pr_warn(".maps relo #%d: '%s' isn't a valid program reference\n",

tools/lib/bpf/libbpf.c

7581

pr_warn(".maps relo #%d: '%s' isn't an entry-point program\n",

tools/lib/bpf/libbpf.c

7646

pr_warn("internal error at %d\n", __LINE__);

tools/lib/bpf/libbpf.c

7756

pr_warn("prog '%s': no BTF-based attach target is specified, use bpf_program__set_attach_target()\n",

tools/lib/bpf/libbpf.c

7804

pr_warn("prog '%s': missing BPF prog type, check ELF section name '%s'\n",

tools/lib/bpf/libbpf.c

7809

pr_warn("prog '%s': SEC(\"struct_ops\") program isn't referenced anywhere, did you forget to use it?\n",

tools/lib/bpf/libbpf.c

7852

pr_warn("prog '%s': failed to prepare load attributes: %s\n",

tools/lib/bpf/libbpf.c

7917

pr_warn("prog '%s': failed to bind map '%s': %s\n",

tools/lib/bpf/libbpf.c

7948

pr_warn("prog '%s': BPF program load failed: %s\n", prog->name, errstr(errno));

tools/lib/bpf/libbpf.c

7952

pr_warn("prog '%s': -- BEGIN PROG LOAD LOG --\n%s-- END PROG LOAD LOG --\n",

tools/lib/bpf/libbpf.c

8234

pr_warn("prog '%s': failed to load: %s\n", prog->name, errstr(err));

tools/lib/bpf/libbpf.c

8283

pr_warn("prog '%s': failed to initialize: %s\n",

tools/lib/bpf/libbpf.c

8308

pr_warn("failed to init libelf for %s\n",

tools/lib/bpf/libbpf.c

844

pr_warn("sec '%s': corrupted program '%s', offset %zu, size %zu\n",

tools/lib/bpf/libbpf.c

8473

pr_warn("failed to open /proc/kallsyms: %s\n", errstr(err));

tools/lib/bpf/libbpf.c

8483

pr_warn("failed to read kallsyms entry: %d\n", ret);

tools/lib/bpf/libbpf.c

8518

pr_warn("extern (ksym) '%s': resolution is ambiguous: 0x%llx or 0x%llx\n",

tools/lib/bpf/libbpf.c

8583

pr_warn("extern (var ksym) '%s': not found in kernel BTF\n",

tools/lib/bpf/libbpf.c

8606

pr_warn("extern (var ksym) '%s': incompatible types, expected [%d] %s %s, but kernel has [%d] %s %s\n",

tools/lib/bpf/libbpf.c

8638

pr_warn("extern (func ksym) '%s': not found in kernel or module BTFs\n",

tools/lib/bpf/libbpf.c

8652

pr_warn("extern (func ksym) '%s': func_proto [%d] incompatible with %s [%d]\n",

tools/lib/bpf/libbpf.c

8662

pr_warn("extern (func ksym) '%s': module BTF fd index %d too big to fit in bpf_insn offset\n",

tools/lib/bpf/libbpf.c

8760

pr_warn("extern (kcfg) '%s': failed to get kernel version\n", ext->name);

tools/lib/bpf/libbpf.c

8775

pr_warn("extern (kcfg) '%s': unrecognized virtual extern\n", ext->name);

tools/lib/bpf/libbpf.c

8785

pr_warn("extern '%s': unrecognized extern kind\n", ext->name);

tools/lib/bpf/libbpf.c

8821

pr_warn("extern '%s' (strong): not resolved\n", ext->name);

tools/lib/bpf/libbpf.c

8910

pr_warn("object '%s': prepare loading can't be attempted twice\n", obj->name);

tools/lib/bpf/libbpf.c

894

pr_warn("sec '%s': failed to allocate memory for prog '%s'\n", sec_name, name);

tools/lib/bpf/libbpf.c

8945

pr_warn("object '%s': load can't be attempted twice\n", obj->name);

tools/lib/bpf/libbpf.c

8955

pr_warn("object '%s': loading non-native endianness is unsupported\n", obj->name);

tools/lib/bpf/libbpf.c

8982

pr_warn("failed to load object '%s'\n", obj->path);

tools/lib/bpf/libbpf.c

9014

pr_warn("failed to mkdir %s: %s\n", path, errstr(err));

tools/lib/bpf/libbpf.c

9034

pr_warn("failed to statfs %s: %s\n", dir, errstr(errno));

tools/lib/bpf/libbpf.c

9040

pr_warn("specified path %s is not on BPF FS\n", path);

tools/lib/bpf/libbpf.c

9052

pr_warn("prog '%s': can't pin program that wasn't loaded\n", prog->name);

tools/lib/bpf/libbpf.c

9066

pr_warn("prog '%s': failed to pin at '%s': %s\n", prog->name, path, errstr(err));

tools/lib/bpf/libbpf.c

9079

pr_warn("prog '%s': can't unpin program that wasn't loaded\n", prog->name);

tools/lib/bpf/libbpf.c

9100

pr_warn("invalid map pointer\n");

tools/lib/bpf/libbpf.c

9105

pr_warn("map '%s': can't pin BPF map without FD (was it created?)\n", map->name);

tools/lib/bpf/libbpf.c

9111

pr_warn("map '%s' already has pin path '%s' different from '%s'\n",

tools/lib/bpf/libbpf.c

9121

pr_warn("missing a path to pin map '%s' at\n",

tools/lib/bpf/libbpf.c

9125

pr_warn("map '%s' already pinned\n", bpf_map__name(map));

tools/lib/bpf/libbpf.c

9155

pr_warn("failed to pin map: %s\n", errstr(err));

tools/lib/bpf/libbpf.c

9164

pr_warn("invalid map pointer\n");

tools/lib/bpf/libbpf.c

9170

pr_warn("map '%s' already has pin path '%s' different from '%s'\n",

tools/lib/bpf/libbpf.c

9176

pr_warn("no path to unpin map '%s' from\n",

tools/lib/bpf/libbpf.c

9242

pr_warn("object not yet loaded; load it first\n");

tools/lib/bpf/libbpf.c

928

pr_warn("sec '%s': failed to get symbol name for offset %zu\n",

tools/lib/bpf/libbpf.c

9321

pr_warn("object not yet loaded; load it first\n");

tools/lib/bpf/libbpf.c

934

pr_warn("sec '%s': program at offset %zu crosses section boundary\n",

tools/lib/bpf/libbpf.c

940

pr_warn("sec '%s': program '%s' is static and not supported\n", sec_name, name);

tools/lib/bpf/libbpf.c

954

pr_warn("sec '%s': failed to alloc memory for new program '%s'\n",

tools/lib/bpf/libbpf.c

9564

pr_warn("error: program handler doesn't match object\n");

tools/lib/bpf/libbpf.c

9658

pr_warn("prog '%s': failed to realloc prog code\n", prog->name);

tools/lib/bpf/libbpf_internal.h

318

pr_warn("%s size (%zu) is too small\n", type_name, user_sz);

tools/lib/bpf/libbpf_internal.h

322

pr_warn("%s has non-zero extra bytes\n", type_name);

tools/lib/bpf/libbpf_internal.h

672

pr_warn("failed to dup FD %d to FD > 2: %d\n", old_fd, -saved_errno);

tools/lib/bpf/linker.c

1005

pr_warn("ELF relo section #%zu points to missing section #%zu in %s\n",

tools/lib/bpf/linker.c

1014

pr_warn("ELF relo section #%zu name has invalid name in %s\n",

tools/lib/bpf/linker.c

1025

pr_warn("ELF relo section #%zu points to invalid section #%zu in %s\n",

tools/lib/bpf/linker.c

1040

pr_warn("ELF relo #%d in section #%zu has unexpected type %zu in %s\n",

tools/lib/bpf/linker.c

1046

pr_warn("ELF relo #%d in section #%zu points to invalid symbol #%zu in %s\n",

tools/lib/bpf/linker.c

1053

pr_warn("ELF relo #%d in section #%zu points to missing symbol #%zu in %s\n",

tools/lib/bpf/linker.c

1217

pr_warn("sec %s types mismatch\n", dst->sec_name);

tools/lib/bpf/linker.c

1221

pr_warn("sec %s flags mismatch\n", dst->sec_name);

tools/lib/bpf/linker.c

1225

pr_warn("sec %s entsize mismatch\n", dst->sec_name);

tools/lib/bpf/linker.c

1372

pr_warn("failed to init section '%s'\n", src_sec->sec_name);

tools/lib/bpf/linker.c

1377

pr_warn("ELF sections %s are incompatible\n", src_sec->sec_name);

tools/lib/bpf/linker.c

1385

pr_warn("non-identical contents of section '%s' are not supported\n", src_sec->sec_name);

tools/lib/bpf/linker.c

1426

pr_warn("can't fetch symbol name for symbol #%d in '%s'\n", i, obj->filename);

tools/lib/bpf/linker.c

1501

pr_warn("global '%s': incompatible forward declaration names '%s' and '%s'\n",

tools/lib/bpf/linker.c

1511

pr_warn("global '%s': incompatible %s forward declaration and concrete kind %s\n",

tools/lib/bpf/linker.c

1518

pr_warn("global '%s': incompatible %s forward declaration and concrete kind %s\n",

tools/lib/bpf/linker.c

1525

pr_warn("global '%s': incompatible BTF kinds %s and %s\n",

tools/lib/bpf/linker.c

1541

pr_warn("global '%s': incompatible %s names '%s' and '%s'\n",

tools/lib/bpf/linker.c

1560

pr_warn("global '%s': incompatible %s '%s' size %u and %u\n",

tools/lib/bpf/linker.c

1584

pr_warn("global '%s': incompatible func '%s' linkage\n", sym_name, n1);

tools/lib/bpf/linker.c

1596

pr_warn("global '%s': incompatible var '%s' linkage\n", sym_name, n1);

tools/lib/bpf/linker.c

1611

pr_warn("global '%s': incompatible number of %s fields %u and %u\n",

tools/lib/bpf/linker.c

1623

pr_warn("global '%s': incompatible field #%d names '%s' and '%s'\n",

tools/lib/bpf/linker.c

1628

pr_warn("global '%s': incompatible field #%d ('%s') offsets\n",

tools/lib/bpf/linker.c

1642

pr_warn("global '%s': incompatible number of %s params %u and %u\n",

tools/lib/bpf/linker.c

1670

pr_warn("global '%s': unsupported BTF kind %s\n",

tools/lib/bpf/linker.c

1760

pr_warn("global '%s': map %s mismatch\n", sym_name, reason);

tools/lib/bpf/linker.c

1775

pr_warn("global '%s': invalid map definition type [%d]\n", sym_name, btf_id);

tools/lib/bpf/linker.c

1782

pr_warn("global '%s': invalid map definition\n", sym_name);

tools/lib/bpf/linker.c

1792

pr_warn("global '%s': invalid dst map definition\n", sym_name);

tools/lib/bpf/linker.c

1814

pr_warn("BTF info is missing for global symbol '%s'\n", sym_name);

tools/lib/bpf/linker.c

1820

pr_warn("only extern variables and functions are supported, but got '%s' for '%s'\n",

tools/lib/bpf/linker.c

1851

pr_warn("failed to find BTF info for object '%s'\n", obj->filename);

tools/lib/bpf/linker.c

1888

pr_warn("global/extern '%s' BTF is ambiguous: both types #%d and #%u match\n",

tools/lib/bpf/linker.c

1907

pr_warn("failed to find BTF info for global/extern symbol '%s'\n", sym_name);

tools/lib/bpf/linker.c

2014

pr_warn("externs without BTF info are not supported\n");

tools/lib/bpf/linker.c

2057

pr_warn("failed to find matching ELF sec '%s'\n", sec_name);

tools/lib/bpf/linker.c

2078

pr_warn("conflicting non-weak symbol #%d (%s) definition in '%s'\n",

tools/lib/bpf/linker.c

2223

pr_warn("failed to init section '%s'\n", src_sec->sec_name);

tools/lib/bpf/linker.c

2227

pr_warn("sections %s are not compatible\n", src_sec->sec_name);

tools/lib/bpf/linker.c

2278

pr_warn("relocation against STT_SECTION in non-exec section is not supported!\n");

tools/lib/bpf/linker.c

2401

pr_warn("failed to find symbol for variable '%s' in section '%s'\n", var_name, sec_name);

tools/lib/bpf/linker.c

2469

pr_warn("failed to append BTF type #%d from file '%s'\n", i, obj->filename);

tools/lib/bpf/linker.c

2498

pr_warn("failed to find new ID mapping for original BTF type ID %u\n",

tools/lib/bpf/linker.c

253

pr_warn("failed to create '%s': %d\n", filename, err);

tools/lib/bpf/linker.c

2558

pr_warn("global '%s': section mismatch %d vs %d\n",

tools/lib/bpf/linker.c

2583

pr_warn("global '%s': failed to resolve size of underlying type: %d\n",

tools/lib/bpf/linker.c

2648

pr_warn("can't find section '%s' referenced from .BTF.ext\n", sec_name);

tools/lib/bpf/linker.c

2656

pr_warn("incompatible .BTF.ext record sizes for section '%s'\n", sec_name);

tools/lib/bpf/linker.c

2677

pr_warn("can't find section '%s' referenced from .BTF.ext\n", sec_name);

tools/lib/bpf/linker.c

2685

pr_warn("incompatible .BTF.ext record sizes for section '%s'\n", sec_name);

tools/lib/bpf/linker.c

2719

pr_warn("can't find section '%s' referenced from .BTF.ext\n", sec_name);

tools/lib/bpf/linker.c

2727

pr_warn("incompatible .BTF.ext record sizes for section '%s'\n", sec_name);

tools/lib/bpf/linker.c

2881

pr_warn("failed to add consolidated BTF type for datasec '%s': %d\n",

tools/lib/bpf/linker.c

2896

pr_warn(".BTF.ext generation failed: %s\n", errstr(err));

tools/lib/bpf/linker.c

2903

pr_warn("BTF dedup failed: %s\n", errstr(err));

tools/lib/bpf/linker.c

2921

pr_warn("failed to write out .BTF ELF section: %s\n", errstr(err));

tools/lib/bpf/linker.c

2933

pr_warn("failed to write out .BTF.ext ELF section: %s\n", errstr(err));

tools/lib/bpf/linker.c

2987

pr_warn("mismatch in func_info record size %zu != %u\n",

tools/lib/bpf/linker.c

2998

pr_warn("mismatch in line_info record size %zu != %u\n",

tools/lib/bpf/linker.c

3009

pr_warn("mismatch in core_relo_info record size %zu != %u\n",

tools/lib/bpf/linker.c

3109

pr_warn("failed to parse final .BTF.ext data: %s\n", errstr(err));

tools/lib/bpf/linker.c

532

pr_warn("failed to open file '%s': %s\n", filename, errstr(err));

tools/lib/bpf/linker.c

578

pr_warn("failed to create memfd '%s': %s\n", filename, errstr(ret));

tools/lib/bpf/linker.c

587

pr_warn("failed to write '%s': %s\n", filename, errstr(ret));

tools/lib/bpf/linker.c

702

pr_warn("unknown byte order of ELF file %s\n", obj->filename);

tools/lib/bpf/linker.c

712

pr_warn("byte order mismatch with ELF file %s\n", obj->filename);

tools/lib/bpf/linker.c

773

pr_warn("multiple SYMTAB sections found, not supported\n");

tools/lib/bpf/linker.c

786

pr_warn("failed to parse .BTF from %s: %s\n",

tools/lib/bpf/linker.c

797

pr_warn("failed to parse .BTF.ext from '%s': %s\n",

tools/lib/bpf/linker.c

814

pr_warn("unrecognized section #%zu (%s) in %s\n",

tools/lib/bpf/linker.c

835

pr_warn("ELF is missing SYMTAB section in %s\n", obj->filename);

tools/lib/bpf/linker.c

839

pr_warn("ELF is missing section headers STRTAB section in %s\n", obj->filename);

tools/lib/bpf/linker.c

847

pr_warn("ELF section #%zu has empty name in %s\n", sec->sec_idx, obj->filename);

tools/lib/bpf/linker.c

855

pr_warn("ELF section #%zu alignment %llu is non pow-of-2 alignment in %s\n",

tools/lib/bpf/linker.c

861

pr_warn("ELF section #%zu has inconsistent alignment addr=%llu != d=%llu in %s\n",

tools/lib/bpf/linker.c

868

pr_warn("ELF section #%zu has inconsistent section size sh=%llu != d=%llu in %s\n",

tools/lib/bpf/linker.c

885

pr_warn("ELF section #%zu has unexpected size alignment %llu in %s\n",

tools/lib/bpf/linker.c

902

pr_warn("ELF section #%zu (%s) has unrecognized type %zu in %s\n",

tools/lib/bpf/linker.c

923

pr_warn("ELF SYMTAB section #%zu points to missing STRTAB section #%zu in %s\n",

tools/lib/bpf/linker.c

929

pr_warn("ELF SYMTAB section #%zu points to invalid STRTAB section #%zu in %s\n",

tools/lib/bpf/linker.c

945

pr_warn("ELF sym #0 is invalid in %s\n", obj->filename);

tools/lib/bpf/linker.c

951

pr_warn("ELF sym #%d in section #%zu has unsupported symbol binding %d\n",

tools/lib/bpf/linker.c

956

pr_warn("ELF sym #%d in section #%zu has unsupported symbol visibility %d\n",

tools/lib/bpf/linker.c

963

pr_warn("ELF sym #%d is invalid extern symbol in %s\n",

tools/lib/bpf/linker.c

971

pr_warn("ELF sym #%d in section #%zu points to missing section #%zu in %s\n",

tools/lib/bpf/linker.c

998

pr_warn("ELF relo section #%zu points to invalid SYMTAB section #%zu in %s\n",

tools/lib/bpf/netlink.c

216

pr_warn("Invalid message or trailing data in Netlink response: %d bytes left\n", len);

tools/lib/bpf/netlink.c

68

pr_warn("Netlink error reporting not supported\n");

tools/lib/bpf/nlattr.c

125

pr_warn("Attribute of type %#x found multiple times in message, "

tools/lib/bpf/nlattr.c

184

pr_warn("Failed to parse extended error attributes\n");

tools/lib/bpf/nlattr.c

191

pr_warn("Kernel error message: %s\n", errmsg);

tools/lib/bpf/relo_core.c

1068

pr_warn("prog '%s': relo #%d: unexpected insn #%d (ALU/ALU64) value: got %u, exp %llu -> %llu\n",

tools/lib/bpf/relo_core.c

1084

pr_warn("prog '%s': relo #%d: unexpected insn #%d (LDX/ST/STX) value: got %u, exp %llu -> %llu\n",

tools/lib/bpf/relo_core.c

1090

pr_warn("prog '%s': relo #%d: insn #%d (LDX/ST/STX) value too big: %llu\n",

tools/lib/bpf/relo_core.c

1095

pr_warn("prog '%s': relo #%d: insn #%d (LDX/ST/STX) accesses field incorrectly. "

tools/lib/bpf/relo_core.c

1112

pr_warn("prog '%s': relo #%d: insn #%d (LDX/ST/STX) unexpected mem size: got %d, exp %u\n",

tools/lib/bpf/relo_core.c

1119

pr_warn("prog '%s': relo #%d: insn #%d (LDX/ST/STX) invalid new mem size: %u\n",

tools/lib/bpf/relo_core.c

1136

pr_warn("prog '%s': relo #%d: insn #%d (LDIMM64) has unexpected form\n",

tools/lib/bpf/relo_core.c

1143

pr_warn("prog '%s': relo #%d: unexpected insn #%d (LDIMM64) value: got %llu, exp %llu -> %llu\n",

tools/lib/bpf/relo_core.c

1158

pr_warn("prog '%s': relo #%d: trying to relocate unrecognized insn #%d, code:0x%x, src:0x%x, dst:0x%x, off:0x%x, imm:0x%x\n",

tools/lib/bpf/relo_core.c

1324

pr_warn("prog '%s': relo #%d: parsing [%d] %s %s + %s failed: %d\n",

tools/lib/bpf/relo_core.c

1347

pr_warn("prog '%s': relo #%d: <%s> (%d) relocation doesn't support anonymous types\n",

tools/lib/bpf/relo_core.c

1357

pr_warn("prog '%s': relo #%d: error matching candidate #%d %s: %d\n",

tools/lib/bpf/relo_core.c

1380

pr_warn("prog '%s': relo #%d: field offset ambiguity: %u != %u\n",

tools/lib/bpf/relo_core.c

1390

pr_warn("prog '%s': relo #%d: relocation decision ambiguity: %s %llu != %s %llu\n",

tools/lib/bpf/relo_core.c

1698

pr_warn("unexpected kind %s relocated, local [%d], target [%d]\n",

tools/lib/bpf/relo_core.c

219

pr_warn("unexpected kind %s relocated, local [%d], target [%d]\n",

tools/lib/bpf/relo_core.c

385

pr_warn("prog '%s': relo for [%u] %s (at idx %d) captures type [%d] of unexpected kind %s\n",

tools/lib/bpf/relo_core.c

726

pr_warn("prog '%s': relo %d at insn #%d can't be applied to array access\n",

tools/lib/bpf/relo_core.c

748

pr_warn("prog '%s': relo %d at insn #%d can't be satisfied for bitfield\n",

tools/lib/bpf/relo_core.c

972

pr_warn("prog '%s': relo #%d: unrecognized CO-RE relocation %s (%d) at insn #%d\n",

tools/lib/bpf/ringbuf.c

126

pr_warn("ringbuf: failed to mmap consumer page for map fd=%d: %s\n",

tools/lib/bpf/ringbuf.c

139

pr_warn("ringbuf: ring buffer size (%u) is too big\n", info.max_entries);

tools/lib/bpf/ringbuf.c

145

pr_warn("ringbuf: failed to mmap data pages for map fd=%d: %s\n",

tools/lib/bpf/ringbuf.c

159

pr_warn("ringbuf: failed to epoll add map fd=%d: %s\n",

tools/lib/bpf/ringbuf.c

208

pr_warn("ringbuf: failed to create epoll instance: %s\n", errstr(err));

tools/lib/bpf/ringbuf.c

461

pr_warn("user ringbuf: failed to get map info for fd=%d: %s\n",

tools/lib/bpf/ringbuf.c

467

pr_warn("user ringbuf: map fd=%d is not BPF_MAP_TYPE_USER_RINGBUF\n", map_fd);

tools/lib/bpf/ringbuf.c

478

pr_warn("user ringbuf: failed to mmap consumer page for map fd=%d: %s\n",

tools/lib/bpf/ringbuf.c

491

pr_warn("user ringbuf: ring buf size (%u) is too big\n", info.max_entries);

tools/lib/bpf/ringbuf.c

498

pr_warn("user ringbuf: failed to mmap data pages for map fd=%d: %s\n",

tools/lib/bpf/ringbuf.c

510

pr_warn("user ringbuf: failed to epoll add map fd=%d: %s\n", map_fd, errstr(err));

tools/lib/bpf/ringbuf.c

535

pr_warn("user ringbuf: failed to create epoll instance: %s\n", errstr(err));

tools/lib/bpf/ringbuf.c

91

pr_warn("ringbuf: failed to get map info for fd=%d: %s\n",

tools/lib/bpf/ringbuf.c

97

pr_warn("ringbuf: map fd=%d is not BPF_MAP_TYPE_RINGBUF\n",

tools/lib/bpf/skel_internal.h

400

pr_warn("signatures are not supported from bpf_preload\n");

tools/lib/bpf/usdt.c

1061

pr_warn("usdt: failed to set USDT spec #%d for '%s:%s' in '%s': %s\n",

tools/lib/bpf/usdt.c

1069

pr_warn("usdt: IP collision detected for spec #%d for '%s:%s' in '%s'\n",

tools/lib/bpf/usdt.c

1072

pr_warn("usdt: failed to map IP 0x%lx to spec #%d for '%s:%s' in '%s': %s\n",

tools/lib/bpf/usdt.c

1090

pr_warn("usdt: failed to attach uprobe #%d for '%s:%s' in '%s': %s\n",

tools/lib/bpf/usdt.c

1113

pr_warn("usdt: failed to attach uprobe multi for '%s:%s' in '%s': %s\n",

tools/lib/bpf/usdt.c

1212

pr_warn("usdt: too many USDT arguments (> %d) for '%s:%s' with args spec '%s'\n",

tools/lib/bpf/usdt.c

1231

pr_warn("usdt: unsupported arg #%d (spec '%s') size: %d\n",

tools/lib/bpf/usdt.c

1288

pr_warn("usdt: unrecognized register '%s'\n", reg_name);

tools/lib/bpf/usdt.c

1334

pr_warn("usdt: invalid SIB scale %d, expected 1, 2, 4, 8\n", scale);

tools/lib/bpf/usdt.c

1370

pr_warn("usdt: unrecognized arg #%d spec '%s'\n", arg_num, arg_str);

tools/lib/bpf/usdt.c

1390

pr_warn("usdt: unrecognized register '%%r%u'\n", reg);

tools/lib/bpf/usdt.c

1399

pr_warn("usdt: unrecognized register '%%r%u'\n", reg);

tools/lib/bpf/usdt.c

1409

pr_warn("usdt: unrecognized arg #%d spec '%s'\n", arg_num, arg_str);

tools/lib/bpf/usdt.c

1428

pr_warn("usdt: unrecognized register '%s'\n", reg_name);

tools/lib/bpf/usdt.c

1468

pr_warn("usdt: unrecognized arg #%d spec '%s'\n", arg_num, arg_str);

tools/lib/bpf/usdt.c

1522

pr_warn("usdt: unrecognized register '%s'\n", reg_name);

tools/lib/bpf/usdt.c

1554

pr_warn("usdt: unrecognized arg #%d spec '%s'\n", arg_num, arg_str);

tools/lib/bpf/usdt.c

1593

pr_warn("usdt: unrecognized register '%s'\n", reg_name);

tools/lib/bpf/usdt.c

1634

pr_warn("usdt: unrecognized arg #%d spec '%s'\n", arg_num, arg_str);

tools/lib/bpf/usdt.c

1645

pr_warn("usdt: libbpf doesn't support USDTs on current architecture\n");

tools/lib/bpf/usdt.c

276

pr_warn("usdt: failed to find USDT support BPF maps, did you forget to include bpf/usdt.bpf.h?\n");

tools/lib/bpf/usdt.c

322

pr_warn("usdt: unrecognized ELF kind %d for '%s'\n", elf_kind(elf), path);

tools/lib/bpf/usdt.c

329

pr_warn("usdt: attaching to 64-bit ELF binary '%s' is not supported\n", path);

tools/lib/bpf/usdt.c

335

pr_warn("usdt: attaching to 32-bit ELF binary '%s' is not supported\n", path);

tools/lib/bpf/usdt.c

340

pr_warn("usdt: unsupported ELF class for '%s'\n", path);

tools/lib/bpf/usdt.c

348

pr_warn("usdt: unsupported type of ELF binary '%s' (%d), only ET_EXEC and ET_DYN are supported\n",

tools/lib/bpf/usdt.c

361

pr_warn("usdt: ELF endianness mismatch for '%s'\n", path);

tools/lib/bpf/usdt.c

453

pr_warn("usdt: failed to find PT_LOAD program headers in '%s'\n", path);

tools/lib/bpf/usdt.c

479

pr_warn("usdt: failed to get absolute path of '%s' (err %s), using path as is...\n",

tools/lib/bpf/usdt.c

489

pr_warn("usdt: failed to open '%s' to get base addr of '%s': %s\n",

tools/lib/bpf/usdt.c

538

pr_warn("usdt: failed to find '%s' (resolved to '%s') within PID %d memory mappings\n",

tools/lib/bpf/usdt.c

608

pr_warn("usdt: no USDT notes section (%s) found in '%s'\n", USDT_NOTE_SEC, path);

tools/lib/bpf/usdt.c

613

pr_warn("usdt: invalid USDT notes section (%s) in '%s'\n", USDT_NOTE_SEC, path);

tools/lib/bpf/usdt.c

619

pr_warn("usdt: failed to process ELF program segments for '%s': %s\n",

tools/lib/bpf/usdt.c

684

pr_warn("usdt: failed to find ELF program segment for '%s:%s' in '%s' at IP 0x%lx\n",

tools/lib/bpf/usdt.c

690

pr_warn("usdt: matched ELF binary '%s' segment [0x%lx, 0x%lx) for '%s:%s' at IP 0x%lx is not executable\n",

tools/lib/bpf/usdt.c

713

pr_warn("usdt: attaching to shared libraries without specific PID is not supported on current kernel\n");

tools/lib/bpf/usdt.c

722

pr_warn("usdt: failed to get memory segments in PID %d for shared library '%s': %s\n",

tools/lib/bpf/usdt.c

731

pr_warn("usdt: failed to find shared lib memory segment for '%s:%s' in '%s' at relative IP 0x%lx\n",

tools/lib/bpf/usdt.c

747

pr_warn("usdt: kernel doesn't support USDT semaphore refcounting for '%s:%s' in '%s'\n",

tools/lib/bpf/usdt.c

756

pr_warn("usdt: failed to find ELF loadable segment with semaphore of '%s:%s' in '%s' at 0x%lx\n",

tools/lib/bpf/usdt.c

762

pr_warn("usdt: matched ELF binary '%s' segment [0x%lx, 0x%lx] for semaphore of '%s:%s' at 0x%lx is executable\n",

tools/testing/nvdimm/test/ndtest.c

314

pr_warn("Failed to get resource\n");

tools/testing/selftests/kselftest_module.h

21

pr_warn("TC failed at %s:%d\n", __func__, __LINE__); \

tools/testing/selftests/kselftest_module.h

36

pr_warn("failed %u out of %u tests\n", failed_tests, total_tests);

tools/testing/selftests/net/bench/page_pool/bench_page_pool_simple.c

148

pr_warn("%s: Error(%d) creating page_pool\n", func, err);

tools/testing/selftests/net/bench/page_pool/bench_page_pool_simple.c

154

pr_warn("%s(): in_serving_softirq fast-path\n", func);

tools/testing/selftests/net/bench/page_pool/bench_page_pool_simple.c

156

pr_warn("%s(): Cannot use page_pool fast-path\n", func);

tools/testing/selftests/net/bench/page_pool/time_bench.c

235

pr_warn("WARNING: Invoke count(%llu) smaller than loops(%d)\n",

tools/testing/selftests/net/bench/page_pool/time_bench.c

338

pr_warn("%s() Started on CPU:%d\n", __func__,

tools/testing/selftests/net/bench/page_pool/time_bench.c

392

pr_warn("%s() Finished on CPU:%d\n", __func__,

tools/testing/selftests/powerpc/tm/tm-unavailable.c

323

pr_warn(rc, "pthread_setname_np");

tools/testing/selftests/powerpc/tm/tm-unavailable.c

373

pr_warn(rc, "pthread_create()");