// SPDX-License-Identifier: GPL-2.0
/*
 * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
 * Copyright (C) 2005-2006 Thomas Gleixner
 *
 * This file contains driver APIs to the irq subsystem.
 */

#define pr_fmt(fmt) "genirq: " fmt

#include <linux/irq.h>
#include <linux/kthread.h>
#include <linux/module.h>
#include <linux/random.h>
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/slab.h>
#include <linux/sched.h>
#include <linux/sched/rt.h>
#include <linux/sched/task.h>
#include <linux/sched/isolation.h>
#include <uapi/linux/sched/types.h>
#include <linux/task_work.h>

#include "internals.h"

#if defined(CONFIG_IRQ_FORCED_THREADING) && !defined(CONFIG_PREEMPT_RT)
DEFINE_STATIC_KEY_FALSE(force_irqthreads_key);

static int __init setup_forced_irqthreads(char *arg)
{
        static_branch_enable(&force_irqthreads_key);
        return 0;
}
early_param("threadirqs", setup_forced_irqthreads);
#endif

#ifdef CONFIG_SMP
static inline void synchronize_irqwork(struct irq_desc *desc)
{
        /* Synchronize pending or on the fly redirect work */
        irq_work_sync(&desc->redirect.work);
}
#else
static inline void synchronize_irqwork(struct irq_desc *desc) { }
#endif

static int __irq_get_irqchip_state(struct irq_data *d, enum irqchip_irq_state which, bool *state);

static void __synchronize_hardirq(struct irq_desc *desc, bool sync_chip)
{
        struct irq_data *irqd = irq_desc_get_irq_data(desc);
        bool inprogress;

        do {
                /*
                 * Wait until we're out of the critical section.  This might
                 * give the wrong answer due to the lack of memory barriers.
                 */
                while (irqd_irq_inprogress(&desc->irq_data))
                        cpu_relax();

                /* Ok, that indicated we're done: double-check carefully. */
                guard(raw_spinlock_irqsave)(&desc->lock);
                inprogress = irqd_irq_inprogress(&desc->irq_data);

                /*
                 * If requested and supported, check at the chip whether it
                 * is in flight at the hardware level, i.e. already pending
                 * in a CPU and waiting for service and acknowledge.
                 */
                if (!inprogress && sync_chip) {
                        /*
                         * Ignore the return code. inprogress is only updated
                         * when the chip supports it.
                         */
                        __irq_get_irqchip_state(irqd, IRQCHIP_STATE_ACTIVE,
                                                &inprogress);
                }
                /* Oops, that failed? */
        } while (inprogress);
}

/**
 * synchronize_hardirq - wait for pending hard IRQ handlers (on other CPUs)
 * @irq: interrupt number to wait for
 *
 * This function waits for any pending hard IRQ handlers for this interrupt
 * to complete before returning. If you use this function while holding a
 * resource the IRQ handler may need you will deadlock. It does not take
 * associated threaded handlers into account.
 *
 * Do not use this for shutdown scenarios where you must be sure that all
 * parts (hardirq and threaded handler) have completed.
 *
 * Returns: false if a threaded handler is active.
 *
 * This function may be called - with care - from IRQ context.
 *
 * It does not check whether there is an interrupt in flight at the
 * hardware level, but not serviced yet, as this might deadlock when called
 * with interrupts disabled and the target CPU of the interrupt is the
 * current CPU.
 */
bool synchronize_hardirq(unsigned int irq)
{
        struct irq_desc *desc = irq_to_desc(irq);

        if (desc) {
                __synchronize_hardirq(desc, false);
                return !atomic_read(&desc->threads_active);
        }

        return true;
}
EXPORT_SYMBOL(synchronize_hardirq);

static void __synchronize_irq(struct irq_desc *desc)
{
        synchronize_irqwork(desc);
        __synchronize_hardirq(desc, true);

        /*
         * We made sure that no hardirq handler is running. Now verify that no
         * threaded handlers are active.
         */
        wait_event(desc->wait_for_threads, !atomic_read(&desc->threads_active));
}

/**
 * synchronize_irq - wait for pending IRQ handlers (on other CPUs)
 * @irq: interrupt number to wait for
 *
 * This function waits for any pending IRQ handlers for this interrupt to
 * complete before returning. If you use this function while holding a
 * resource the IRQ handler may need you will deadlock.
 *
 * Can only be called from preemptible code as it might sleep when
 * an interrupt thread is associated to @irq.
 *
 * It optionally makes sure (when the irq chip supports that method)
 * that the interrupt is not pending in any CPU and waiting for
 * service.
 */
void synchronize_irq(unsigned int irq)
{
        struct irq_desc *desc = irq_to_desc(irq);

        if (desc)
                __synchronize_irq(desc);
}
EXPORT_SYMBOL(synchronize_irq);

#ifdef CONFIG_SMP
cpumask_var_t irq_default_affinity;

static bool __irq_can_set_affinity(struct irq_desc *desc)
{
        if (!desc || !irqd_can_balance(&desc->irq_data) ||
            !desc->irq_data.chip || !desc->irq_data.chip->irq_set_affinity)
                return false;
        return true;
}

/**
 * irq_can_set_affinity - Check if the affinity of a given irq can be set
 * @irq:        Interrupt to check
 *
 */
int irq_can_set_affinity(unsigned int irq)
{
        return __irq_can_set_affinity(irq_to_desc(irq));
}

/**
 * irq_can_set_affinity_usr - Check if affinity of a irq can be set from user space
 * @irq:        Interrupt to check
 *
 * Like irq_can_set_affinity() above, but additionally checks for the
 * AFFINITY_MANAGED flag.
 */
bool irq_can_set_affinity_usr(unsigned int irq)
{
        struct irq_desc *desc = irq_to_desc(irq);

        return __irq_can_set_affinity(desc) &&
                !irqd_affinity_is_managed(&desc->irq_data);
}

/**
 * irq_set_thread_affinity - Notify irq threads to adjust affinity
 * @desc:       irq descriptor which has affinity changed
 *
 * Just set IRQTF_AFFINITY and delegate the affinity setting to the
 * interrupt thread itself. We can not call set_cpus_allowed_ptr() here as
 * we hold desc->lock and this code can be called from hard interrupt
 * context.
 */
static void irq_set_thread_affinity(struct irq_desc *desc)
{
        struct irqaction *action;

        for_each_action_of_desc(desc, action) {
                if (action->thread) {
                        set_bit(IRQTF_AFFINITY, &action->thread_flags);
                        wake_up_process(action->thread);
                }
                if (action->secondary && action->secondary->thread) {
                        set_bit(IRQTF_AFFINITY, &action->secondary->thread_flags);
                        wake_up_process(action->secondary->thread);
                }
        }
}

#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK
static void irq_validate_effective_affinity(struct irq_data *data)
{
        const struct cpumask *m = irq_data_get_effective_affinity_mask(data);
        struct irq_chip *chip = irq_data_get_irq_chip(data);

        if (!cpumask_empty(m))
                return;
        pr_warn_once("irq_chip %s did not update eff. affinity mask of irq %u\n",
                     chip->name, data->irq);
}
#else
static inline void irq_validate_effective_affinity(struct irq_data *data) { }
#endif

static DEFINE_PER_CPU(struct cpumask, __tmp_mask);

int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask, bool force)
{
        struct cpumask *tmp_mask = this_cpu_ptr(&__tmp_mask);
        struct irq_desc *desc = irq_data_to_desc(data);
        struct irq_chip *chip = irq_data_get_irq_chip(data);
        const struct cpumask  *prog_mask;
        int ret;

        if (!chip || !chip->irq_set_affinity)
                return -EINVAL;

        /*
         * If this is a managed interrupt and housekeeping is enabled on
         * it check whether the requested affinity mask intersects with
         * a housekeeping CPU. If so, then remove the isolated CPUs from
         * the mask and just keep the housekeeping CPU(s). This prevents
         * the affinity setter from routing the interrupt to an isolated
         * CPU to avoid that I/O submitted from a housekeeping CPU causes
         * interrupts on an isolated one.
         *
         * If the masks do not intersect or include online CPU(s) then
         * keep the requested mask. The isolated target CPUs are only
         * receiving interrupts when the I/O operation was submitted
         * directly from them.
         *
         * If all housekeeping CPUs in the affinity mask are offline, the
         * interrupt will be migrated by the CPU hotplug code once a
         * housekeeping CPU which belongs to the affinity mask comes
         * online.
         */
        if (irqd_affinity_is_managed(data) &&
            housekeeping_enabled(HK_TYPE_MANAGED_IRQ)) {
                const struct cpumask *hk_mask;

                hk_mask = housekeeping_cpumask(HK_TYPE_MANAGED_IRQ);

                cpumask_and(tmp_mask, mask, hk_mask);
                if (!cpumask_intersects(tmp_mask, cpu_online_mask))
                        prog_mask = mask;
                else
                        prog_mask = tmp_mask;
        } else {
                prog_mask = mask;
        }

        /*
         * Make sure we only provide online CPUs to the irqchip,
         * unless we are being asked to force the affinity (in which
         * case we do as we are told).
         */
        cpumask_and(tmp_mask, prog_mask, cpu_online_mask);
        if (!force && !cpumask_empty(tmp_mask))
                ret = chip->irq_set_affinity(data, tmp_mask, force);
        else if (force)
                ret = chip->irq_set_affinity(data, mask, force);
        else
                ret = -EINVAL;

        switch (ret) {
        case IRQ_SET_MASK_OK:
        case IRQ_SET_MASK_OK_DONE:
                cpumask_copy(desc->irq_common_data.affinity, mask);
                fallthrough;
        case IRQ_SET_MASK_OK_NOCOPY:
                irq_validate_effective_affinity(data);
                irq_set_thread_affinity(desc);
                ret = 0;
        }

        return ret;
}

#ifdef CONFIG_GENERIC_PENDING_IRQ
static inline int irq_set_affinity_pending(struct irq_data *data,
                                           const struct cpumask *dest)
{
        struct irq_desc *desc = irq_data_to_desc(data);

        irqd_set_move_pending(data);
        irq_copy_pending(desc, dest);
        return 0;
}
#else
static inline int irq_set_affinity_pending(struct irq_data *data,
                                           const struct cpumask *dest)
{
        return -EBUSY;
}
#endif

static int irq_try_set_affinity(struct irq_data *data,
                                const struct cpumask *dest, bool force)
{
        int ret = irq_do_set_affinity(data, dest, force);

        /*
         * In case that the underlying vector management is busy and the
         * architecture supports the generic pending mechanism then utilize
         * this to avoid returning an error to user space.
         */
        if (ret == -EBUSY && !force)
                ret = irq_set_affinity_pending(data, dest);
        return ret;
}

static bool irq_set_affinity_deactivated(struct irq_data *data,
                                         const struct cpumask *mask)
{
        struct irq_desc *desc = irq_data_to_desc(data);

        /*
         * Handle irq chips which can handle affinity only in activated
         * state correctly
         *
         * If the interrupt is not yet activated, just store the affinity
         * mask and do not call the chip driver at all. On activation the
         * driver has to make sure anyway that the interrupt is in a
         * usable state so startup works.
         */
        if (!IS_ENABLED(CONFIG_IRQ_DOMAIN_HIERARCHY) ||
            irqd_is_activated(data) || !irqd_affinity_on_activate(data))
                return false;

        cpumask_copy(desc->irq_common_data.affinity, mask);
        irq_data_update_effective_affinity(data, mask);
        irqd_set(data, IRQD_AFFINITY_SET);
        return true;
}

/**
 * irq_affinity_schedule_notify_work - Schedule work to notify about affinity change
 * @desc:  Interrupt descriptor whose affinity changed
 */
void irq_affinity_schedule_notify_work(struct irq_desc *desc)
{
        lockdep_assert_held(&desc->lock);

        kref_get(&desc->affinity_notify->kref);
        if (!schedule_work(&desc->affinity_notify->work)) {
                /* Work was already scheduled, drop our extra ref */
                kref_put(&desc->affinity_notify->kref, desc->affinity_notify->release);
        }
}

int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask,
                            bool force)
{
        struct irq_chip *chip = irq_data_get_irq_chip(data);
        struct irq_desc *desc = irq_data_to_desc(data);
        int ret = 0;

        if (!chip || !chip->irq_set_affinity)
                return -EINVAL;

        if (irq_set_affinity_deactivated(data, mask))
                return 0;

        if (irq_can_move_pcntxt(data) && !irqd_is_setaffinity_pending(data)) {
                ret = irq_try_set_affinity(data, mask, force);
        } else {
                irqd_set_move_pending(data);
                irq_copy_pending(desc, mask);
        }

        if (desc->affinity_notify)
                irq_affinity_schedule_notify_work(desc);

        irqd_set(data, IRQD_AFFINITY_SET);

        return ret;
}

/**
 * irq_update_affinity_desc - Update affinity management for an interrupt
 * @irq:        The interrupt number to update
 * @affinity:   Pointer to the affinity descriptor
 *
 * This interface can be used to configure the affinity management of
 * interrupts which have been allocated already.
 *
 * There are certain limitations on when it may be used - attempts to use it
 * for when the kernel is configured for generic IRQ reservation mode (in
 * config GENERIC_IRQ_RESERVATION_MODE) will fail, as it may conflict with
 * managed/non-managed interrupt accounting. In addition, attempts to use it on
 * an interrupt which is already started or which has already been configured
 * as managed will also fail, as these mean invalid init state or double init.
 */
int irq_update_affinity_desc(unsigned int irq, struct irq_affinity_desc *affinity)
{
        /*
         * Supporting this with the reservation scheme used by x86 needs
         * some more thought. Fail it for now.
         */
        if (IS_ENABLED(CONFIG_GENERIC_IRQ_RESERVATION_MODE))
                return -EOPNOTSUPP;

        scoped_irqdesc_get_and_buslock(irq, 0) {
                struct irq_desc *desc = scoped_irqdesc;
                bool activated;

                /* Requires the interrupt to be shut down */
                if (irqd_is_started(&desc->irq_data))
                        return -EBUSY;

                /* Interrupts which are already managed cannot be modified */
                if (irqd_affinity_is_managed(&desc->irq_data))
                        return -EBUSY;
                /*
                 * Deactivate the interrupt. That's required to undo
                 * anything an earlier activation has established.
                 */
                activated = irqd_is_activated(&desc->irq_data);
                if (activated)
                        irq_domain_deactivate_irq(&desc->irq_data);

                if (affinity->is_managed) {
                        irqd_set(&desc->irq_data, IRQD_AFFINITY_MANAGED);
                        irqd_set(&desc->irq_data, IRQD_MANAGED_SHUTDOWN);
                }

                cpumask_copy(desc->irq_common_data.affinity, &affinity->mask);

                /* Restore the activation state */
                if (activated)
                        irq_domain_activate_irq(&desc->irq_data, false);
                return 0;
        }
        return -EINVAL;
}

static int __irq_set_affinity(unsigned int irq, const struct cpumask *mask,
                              bool force)
{
        struct irq_desc *desc = irq_to_desc(irq);

        if (!desc)
                return -EINVAL;

        guard(raw_spinlock_irqsave)(&desc->lock);
        return irq_set_affinity_locked(irq_desc_get_irq_data(desc), mask, force);
}

/**
 * irq_set_affinity - Set the irq affinity of a given irq
 * @irq:        Interrupt to set affinity
 * @cpumask:    cpumask
 *
 * Fails if cpumask does not contain an online CPU
 */
int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask)
{
        return __irq_set_affinity(irq, cpumask, false);
}
EXPORT_SYMBOL_GPL(irq_set_affinity);

/**
 * irq_force_affinity - Force the irq affinity of a given irq
 * @irq:        Interrupt to set affinity
 * @cpumask:    cpumask
 *
 * Same as irq_set_affinity, but without checking the mask against
 * online cpus.
 *
 * Solely for low level cpu hotplug code, where we need to make per
 * cpu interrupts affine before the cpu becomes online.
 */
int irq_force_affinity(unsigned int irq, const struct cpumask *cpumask)
{
        return __irq_set_affinity(irq, cpumask, true);
}
EXPORT_SYMBOL_GPL(irq_force_affinity);

int __irq_apply_affinity_hint(unsigned int irq, const struct cpumask *m, bool setaffinity)
{
        int ret = -EINVAL;

        scoped_irqdesc_get_and_lock(irq, IRQ_GET_DESC_CHECK_GLOBAL) {
                scoped_irqdesc->affinity_hint = m;
                ret = 0;
        }

        if (!ret && m && setaffinity)
                __irq_set_affinity(irq, m, false);
        return ret;
}
EXPORT_SYMBOL_GPL(__irq_apply_affinity_hint);

static void irq_affinity_notify(struct work_struct *work)
{
        struct irq_affinity_notify *notify = container_of(work, struct irq_affinity_notify, work);
        struct irq_desc *desc = irq_to_desc(notify->irq);
        cpumask_var_t cpumask;

        if (!desc || !alloc_cpumask_var(&cpumask, GFP_KERNEL))
                goto out;

        scoped_guard(raw_spinlock_irqsave, &desc->lock) {
                if (irq_move_pending(&desc->irq_data))
                        irq_get_pending(cpumask, desc);
                else
                        cpumask_copy(cpumask, desc->irq_common_data.affinity);
        }

        notify->notify(notify, cpumask);

        free_cpumask_var(cpumask);
out:
        kref_put(&notify->kref, notify->release);
}

/**
 * irq_set_affinity_notifier - control notification of IRQ affinity changes
 * @irq:        Interrupt for which to enable/disable notification
 * @notify:     Context for notification, or %NULL to disable
 *              notification.  Function pointers must be initialised;
 *              the other fields will be initialised by this function.
 *
 * Must be called in process context.  Notification may only be enabled
 * after the IRQ is allocated and must be disabled before the IRQ is freed
 * using free_irq().
 */
int irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify)
{
        struct irq_desc *desc = irq_to_desc(irq);
        struct irq_affinity_notify *old_notify;

        /* The release function is promised process context */
        might_sleep();

        if (!desc || irq_is_nmi(desc))
                return -EINVAL;

        /* Complete initialisation of *notify */
        if (notify) {
                notify->irq = irq;
                kref_init(&notify->kref);
                INIT_WORK(&notify->work, irq_affinity_notify);
        }

        scoped_guard(raw_spinlock_irq, &desc->lock) {
                old_notify = desc->affinity_notify;
                desc->affinity_notify = notify;
        }

        if (old_notify) {
                if (cancel_work_sync(&old_notify->work)) {
                        /* Pending work had a ref, put that one too */
                        kref_put(&old_notify->kref, old_notify->release);
                }
                kref_put(&old_notify->kref, old_notify->release);
        }

        return 0;
}
EXPORT_SYMBOL_GPL(irq_set_affinity_notifier);

#ifndef CONFIG_AUTO_IRQ_AFFINITY
/*
 * Generic version of the affinity autoselector.
 */
int irq_setup_affinity(struct irq_desc *desc)
{
        struct cpumask *set = irq_default_affinity;
        int node = irq_desc_get_node(desc);

        static DEFINE_RAW_SPINLOCK(mask_lock);
        static struct cpumask mask;

        /* Excludes PER_CPU and NO_BALANCE interrupts */
        if (!__irq_can_set_affinity(desc))
                return 0;

        guard(raw_spinlock)(&mask_lock);
        /*
         * Preserve the managed affinity setting and a userspace affinity
         * setup, but make sure that one of the targets is online.
         */
        if (irqd_affinity_is_managed(&desc->irq_data) ||
            irqd_has_set(&desc->irq_data, IRQD_AFFINITY_SET)) {
                if (cpumask_intersects(desc->irq_common_data.affinity,
                                       cpu_online_mask))
                        set = desc->irq_common_data.affinity;
                else
                        irqd_clear(&desc->irq_data, IRQD_AFFINITY_SET);
        }

        cpumask_and(&mask, cpu_online_mask, set);
        if (cpumask_empty(&mask))
                cpumask_copy(&mask, cpu_online_mask);

        if (node != NUMA_NO_NODE) {
                const struct cpumask *nodemask = cpumask_of_node(node);

                /* make sure at least one of the cpus in nodemask is online */
                if (cpumask_intersects(&mask, nodemask))
                        cpumask_and(&mask, &mask, nodemask);
        }
        return irq_do_set_affinity(&desc->irq_data, &mask, false);
}
#else
/* Wrapper for ALPHA specific affinity selector magic */
int irq_setup_affinity(struct irq_desc *desc)
{
        return irq_select_affinity(irq_desc_get_irq(desc));
}
#endif /* CONFIG_AUTO_IRQ_AFFINITY */
#endif /* CONFIG_SMP */


/**
 * irq_set_vcpu_affinity - Set vcpu affinity for the interrupt
 * @irq:        interrupt number to set affinity
 * @vcpu_info:  vCPU specific data or pointer to a percpu array of vCPU
 *              specific data for percpu_devid interrupts
 *
 * This function uses the vCPU specific data to set the vCPU affinity for
 * an irq. The vCPU specific data is passed from outside, such as KVM. One
 * example code path is as below: KVM -> IOMMU -> irq_set_vcpu_affinity().
 */
int irq_set_vcpu_affinity(unsigned int irq, void *vcpu_info)
{
        scoped_irqdesc_get_and_lock(irq, 0) {
                struct irq_desc *desc = scoped_irqdesc;
                struct irq_data *data;
                struct irq_chip *chip;

                data = irq_desc_get_irq_data(desc);
                do {
                        chip = irq_data_get_irq_chip(data);
                        if (chip && chip->irq_set_vcpu_affinity)
                                break;

                        data = irqd_get_parent_data(data);
                } while (data);

                if (!data)
                        return -ENOSYS;
                return chip->irq_set_vcpu_affinity(data, vcpu_info);
        }
        return -EINVAL;
}
EXPORT_SYMBOL_GPL(irq_set_vcpu_affinity);

void __disable_irq(struct irq_desc *desc)
{
        if (!desc->depth++)
                irq_disable(desc);
}

static int __disable_irq_nosync(unsigned int irq)
{
        scoped_irqdesc_get_and_buslock(irq, IRQ_GET_DESC_CHECK_GLOBAL) {
                __disable_irq(scoped_irqdesc);
                return 0;
        }
        return -EINVAL;
}

/**
 * disable_irq_nosync - disable an irq without waiting
 * @irq: Interrupt to disable
 *
 * Disable the selected interrupt line.  Disables and Enables are
 * nested.
 * Unlike disable_irq(), this function does not ensure existing
 * instances of the IRQ handler have completed before returning.
 *
 * This function may be called from IRQ context.
 */
void disable_irq_nosync(unsigned int irq)
{
        __disable_irq_nosync(irq);
}
EXPORT_SYMBOL(disable_irq_nosync);

/**
 * disable_irq - disable an irq and wait for completion
 * @irq: Interrupt to disable
 *
 * Disable the selected interrupt line.  Enables and Disables are nested.
 *
 * This function waits for any pending IRQ handlers for this interrupt to
 * complete before returning. If you use this function while holding a
 * resource the IRQ handler may need you will deadlock.
 *
 * Can only be called from preemptible code as it might sleep when an
 * interrupt thread is associated to @irq.
 *
 */
void disable_irq(unsigned int irq)
{
        might_sleep();
        if (!__disable_irq_nosync(irq))
                synchronize_irq(irq);
}
EXPORT_SYMBOL(disable_irq);

/**
 * disable_hardirq - disables an irq and waits for hardirq completion
 * @irq: Interrupt to disable
 *
 * Disable the selected interrupt line.  Enables and Disables are nested.
 *
 * This function waits for any pending hard IRQ handlers for this interrupt
 * to complete before returning. If you use this function while holding a
 * resource the hard IRQ handler may need you will deadlock.
 *
 * When used to optimistically disable an interrupt from atomic context the
 * return value must be checked.
 *
 * Returns: false if a threaded handler is active.
 *
 * This function may be called - with care - from IRQ context.
 */
bool disable_hardirq(unsigned int irq)
{
        if (!__disable_irq_nosync(irq))
                return synchronize_hardirq(irq);
        return false;
}
EXPORT_SYMBOL_GPL(disable_hardirq);

/**
 * disable_nmi_nosync - disable an nmi without waiting
 * @irq: Interrupt to disable
 *
 * Disable the selected interrupt line. Disables and enables are nested.
 *
 * The interrupt to disable must have been requested through request_nmi.
 * Unlike disable_nmi(), this function does not ensure existing
 * instances of the IRQ handler have completed before returning.
 */
void disable_nmi_nosync(unsigned int irq)
{
        disable_irq_nosync(irq);
}

void __enable_irq(struct irq_desc *desc)
{
        switch (desc->depth) {
        case 0:
 err_out:
                WARN(1, KERN_WARNING "Unbalanced enable for IRQ %d\n",
                     irq_desc_get_irq(desc));
                break;
        case 1: {
                if (desc->istate & IRQS_SUSPENDED)
                        goto err_out;
                /* Prevent probing on this irq: */
                irq_settings_set_noprobe(desc);
                /*
                 * Call irq_startup() not irq_enable() here because the
                 * interrupt might be marked NOAUTOEN so irq_startup()
                 * needs to be invoked when it gets enabled the first time.
                 * This is also required when __enable_irq() is invoked for
                 * a managed and shutdown interrupt from the S3 resume
                 * path.
                 *
                 * If it was already started up, then irq_startup() will
                 * invoke irq_enable() under the hood.
                 */
                irq_startup(desc, IRQ_RESEND, IRQ_START_FORCE);
                break;
        }
        default:
                desc->depth--;
        }
}

/**
 * enable_irq - enable handling of an irq
 * @irq: Interrupt to enable
 *
 * Undoes the effect of one call to disable_irq().  If this matches the
 * last disable, processing of interrupts on this IRQ line is re-enabled.
 *
 * This function may be called from IRQ context only when
 * desc->irq_data.chip->bus_lock and desc->chip->bus_sync_unlock are NULL !
 */
void enable_irq(unsigned int irq)
{
        scoped_irqdesc_get_and_buslock(irq, IRQ_GET_DESC_CHECK_GLOBAL) {
                struct irq_desc *desc = scoped_irqdesc;

                if (WARN(!desc->irq_data.chip, "enable_irq before setup/request_irq: irq %u\n", irq))
                        return;
                __enable_irq(desc);
        }
}
EXPORT_SYMBOL(enable_irq);

/**
 * enable_nmi - enable handling of an nmi
 * @irq: Interrupt to enable
 *
 * The interrupt to enable must have been requested through request_nmi.
 * Undoes the effect of one call to disable_nmi(). If this matches the last
 * disable, processing of interrupts on this IRQ line is re-enabled.
 */
void enable_nmi(unsigned int irq)
{
        enable_irq(irq);
}

static int set_irq_wake_real(unsigned int irq, unsigned int on)
{
        struct irq_desc *desc = irq_to_desc(irq);
        int ret = -ENXIO;

        if (irq_desc_get_chip(desc)->flags &  IRQCHIP_SKIP_SET_WAKE)
                return 0;

        if (desc->irq_data.chip->irq_set_wake)
                ret = desc->irq_data.chip->irq_set_wake(&desc->irq_data, on);

        return ret;
}

/**
 * irq_set_irq_wake - control irq power management wakeup
 * @irq:        interrupt to control
 * @on: enable/disable power management wakeup
 *
 * Enable/disable power management wakeup mode, which is disabled by
 * default.  Enables and disables must match, just as they match for
 * non-wakeup mode support.
 *
 * Wakeup mode lets this IRQ wake the system from sleep states like
 * "suspend to RAM".
 *
 * Note: irq enable/disable state is completely orthogonal to the
 * enable/disable state of irq wake. An irq can be disabled with
 * disable_irq() and still wake the system as long as the irq has wake
 * enabled. If this does not hold, then the underlying irq chip and the
 * related driver need to be investigated.
 */
int irq_set_irq_wake(unsigned int irq, unsigned int on)
{
        scoped_irqdesc_get_and_buslock(irq, IRQ_GET_DESC_CHECK_GLOBAL) {
                struct irq_desc *desc = scoped_irqdesc;
                int ret = 0;

                /* Don't use NMIs as wake up interrupts please */
                if (irq_is_nmi(desc))
                        return -EINVAL;

                /*
                 * wakeup-capable irqs can be shared between drivers that
                 * don't need to have the same sleep mode behaviors.
                 */
                if (on) {
                        if (desc->wake_depth++ == 0) {
                                ret = set_irq_wake_real(irq, on);
                                if (ret)
                                        desc->wake_depth = 0;
                                else
                                        irqd_set(&desc->irq_data, IRQD_WAKEUP_STATE);
                        }
                } else {
                        if (desc->wake_depth == 0) {
                                WARN(1, "Unbalanced IRQ %d wake disable\n", irq);
                        } else if (--desc->wake_depth == 0) {
                                ret = set_irq_wake_real(irq, on);
                                if (ret)
                                        desc->wake_depth = 1;
                                else
                                        irqd_clear(&desc->irq_data, IRQD_WAKEUP_STATE);
                        }
                }
                return ret;
        }
        return -EINVAL;
}
EXPORT_SYMBOL(irq_set_irq_wake);

/*
 * Internal function that tells the architecture code whether a
 * particular irq has been exclusively allocated or is available
 * for driver use.
 */
bool can_request_irq(unsigned int irq, unsigned long irqflags)
{
        scoped_irqdesc_get_and_lock(irq, IRQ_GET_DESC_CHECK_GLOBAL) {
                struct irq_desc *desc = scoped_irqdesc;

                if (irq_settings_can_request(desc)) {
                        if (!desc->action || irqflags & desc->action->flags & IRQF_SHARED)
                                return true;
                }
        }
        return false;
}

int __irq_set_trigger(struct irq_desc *desc, unsigned long flags)
{
        struct irq_chip *chip = desc->irq_data.chip;
        int ret, unmask = 0;

        if (!chip || !chip->irq_set_type) {
                /*
                 * IRQF_TRIGGER_* but the PIC does not support multiple
                 * flow-types?
                 */
                pr_debug("No set_type function for IRQ %d (%s)\n",
                         irq_desc_get_irq(desc),
                         chip ? (chip->name ? : "unknown") : "unknown");
                return 0;
        }

        if (chip->flags & IRQCHIP_SET_TYPE_MASKED) {
                if (!irqd_irq_masked(&desc->irq_data))
                        mask_irq(desc);
                if (!irqd_irq_disabled(&desc->irq_data))
                        unmask = 1;
        }

        /* Mask all flags except trigger mode */
        flags &= IRQ_TYPE_SENSE_MASK;
        ret = chip->irq_set_type(&desc->irq_data, flags);

        switch (ret) {
        case IRQ_SET_MASK_OK:
        case IRQ_SET_MASK_OK_DONE:
                irqd_clear(&desc->irq_data, IRQD_TRIGGER_MASK);
                irqd_set(&desc->irq_data, flags);
                fallthrough;

        case IRQ_SET_MASK_OK_NOCOPY:
                flags = irqd_get_trigger_type(&desc->irq_data);
                irq_settings_set_trigger_mask(desc, flags);
                irqd_clear(&desc->irq_data, IRQD_LEVEL);
                irq_settings_clr_level(desc);
                if (flags & IRQ_TYPE_LEVEL_MASK) {
                        irq_settings_set_level(desc);
                        irqd_set(&desc->irq_data, IRQD_LEVEL);
                }

                ret = 0;
                break;
        default:
                pr_err("Setting trigger mode %lu for irq %u failed (%pS)\n",
                       flags, irq_desc_get_irq(desc), chip->irq_set_type);
        }
        if (unmask)
                unmask_irq(desc);
        return ret;
}

#ifdef CONFIG_HARDIRQS_SW_RESEND
int irq_set_parent(int irq, int parent_irq)
{
        scoped_irqdesc_get_and_lock(irq, 0) {
                scoped_irqdesc->parent_irq = parent_irq;
                return 0;
        }
        return -EINVAL;
}
EXPORT_SYMBOL_GPL(irq_set_parent);
#endif

/*
 * Default primary interrupt handler for threaded interrupts. Is
 * assigned as primary handler when request_threaded_irq is called
 * with handler == NULL. Useful for oneshot interrupts.
 */
static irqreturn_t irq_default_primary_handler(int irq, void *dev_id)
{
        return IRQ_WAKE_THREAD;
}

/*
 * Primary handler for nested threaded interrupts. Should never be
 * called.
 */
static irqreturn_t irq_nested_primary_handler(int irq, void *dev_id)
{
        WARN(1, "Primary handler called for nested irq %d\n", irq);
        return IRQ_NONE;
}

static irqreturn_t irq_forced_secondary_handler(int irq, void *dev_id)
{
        WARN(1, "Secondary action handler called for irq %d\n", irq);
        return IRQ_NONE;
}

#ifdef CONFIG_SMP
/*
 * Check whether we need to change the affinity of the interrupt thread.
 */
static void irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
{
        cpumask_var_t mask;

        if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
                return;

        __set_current_state(TASK_RUNNING);

        /*
         * In case we are out of memory we set IRQTF_AFFINITY again and
         * try again next time
         */
        if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
                set_bit(IRQTF_AFFINITY, &action->thread_flags);
                return;
        }

        scoped_guard(raw_spinlock_irq, &desc->lock) {
                const struct cpumask *m;

                m = irq_data_get_effective_affinity_mask(&desc->irq_data);
                cpumask_copy(mask, m);
        }

        set_cpus_allowed_ptr(current, mask);
        free_cpumask_var(mask);
}
#else
static inline void irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
#endif

static int irq_wait_for_interrupt(struct irq_desc *desc,
                                  struct irqaction *action)
{
        for (;;) {
                set_current_state(TASK_INTERRUPTIBLE);
                irq_thread_check_affinity(desc, action);

                if (kthread_should_stop()) {
                        /* may need to run one last time */
                        if (test_and_clear_bit(IRQTF_RUNTHREAD,
                                               &action->thread_flags)) {
                                __set_current_state(TASK_RUNNING);
                                return 0;
                        }
                        __set_current_state(TASK_RUNNING);
                        return -1;
                }

                if (test_and_clear_bit(IRQTF_RUNTHREAD,
                                       &action->thread_flags)) {
                        __set_current_state(TASK_RUNNING);
                        return 0;
                }
                schedule();
        }
}

/*
 * Oneshot interrupts keep the irq line masked until the threaded
 * handler finished. unmask if the interrupt has not been disabled and
 * is marked MASKED.
 */
static void irq_finalize_oneshot(struct irq_desc *desc,
                                 struct irqaction *action)
{
        if (!(desc->istate & IRQS_ONESHOT) ||
            action->handler == irq_forced_secondary_handler)
                return;
again:
        chip_bus_lock(desc);
        raw_spin_lock_irq(&desc->lock);

        /*
         * Implausible though it may be we need to protect us against
         * the following scenario:
         *
         * The thread is faster done than the hard interrupt handler
         * on the other CPU. If we unmask the irq line then the
         * interrupt can come in again and masks the line, leaves due
         * to IRQS_INPROGRESS and the irq line is masked forever.
         *
         * This also serializes the state of shared oneshot handlers
         * versus "desc->threads_oneshot |= action->thread_mask;" in
         * irq_wake_thread(). See the comment there which explains the
         * serialization.
         */
        if (unlikely(irqd_irq_inprogress(&desc->irq_data))) {
                raw_spin_unlock_irq(&desc->lock);
                chip_bus_sync_unlock(desc);
                cpu_relax();
                goto again;
        }

        /*
         * Now check again, whether the thread should run. Otherwise
         * we would clear the threads_oneshot bit of this thread which
         * was just set.
         */
        if (test_bit(IRQTF_RUNTHREAD, &action->thread_flags))
                goto out_unlock;

        desc->threads_oneshot &= ~action->thread_mask;

        if (!desc->threads_oneshot && !irqd_irq_disabled(&desc->irq_data) &&
            irqd_irq_masked(&desc->irq_data))
                unmask_threaded_irq(desc);

out_unlock:
        raw_spin_unlock_irq(&desc->lock);
        chip_bus_sync_unlock(desc);
}

/*
 * Interrupts explicitly requested as threaded interrupts want to be
 * preemptible - many of them need to sleep and wait for slow busses to
 * complete.
 */
static irqreturn_t irq_thread_fn(struct irq_desc *desc, struct irqaction *action)
{
        irqreturn_t ret = action->thread_fn(action->irq, action->dev_id);

        if (ret == IRQ_HANDLED)
                atomic_inc(&desc->threads_handled);

        irq_finalize_oneshot(desc, action);
        return ret;
}

/*
 * Interrupts which are not explicitly requested as threaded
 * interrupts rely on the implicit bh/preempt disable of the hard irq
 * context. So we need to disable bh here to avoid deadlocks and other
 * side effects.
 */
static irqreturn_t irq_forced_thread_fn(struct irq_desc *desc, struct irqaction *action)
{
        irqreturn_t ret;

        local_bh_disable();
        if (!IS_ENABLED(CONFIG_PREEMPT_RT))
                local_irq_disable();
        ret = irq_thread_fn(desc, action);
        if (!IS_ENABLED(CONFIG_PREEMPT_RT))
                local_irq_enable();
        local_bh_enable();
        return ret;
}

void wake_threads_waitq(struct irq_desc *desc)
{
        if (atomic_dec_and_test(&desc->threads_active))
                wake_up(&desc->wait_for_threads);
}

static void irq_thread_dtor(struct callback_head *unused)
{
        struct task_struct *tsk = current;
        struct irq_desc *desc;
        struct irqaction *action;

        if (WARN_ON_ONCE(!(current->flags & PF_EXITING)))
                return;

        action = kthread_data(tsk);

        pr_err("exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n",
               tsk->comm, tsk->pid, action->irq);


        desc = irq_to_desc(action->irq);
        /*
         * If IRQTF_RUNTHREAD is set, we need to decrement
         * desc->threads_active and wake possible waiters.
         */
        if (test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags))
                wake_threads_waitq(desc);

        /* Prevent a stale desc->threads_oneshot */
        irq_finalize_oneshot(desc, action);
}

static void irq_wake_secondary(struct irq_desc *desc, struct irqaction *action)
{
        struct irqaction *secondary = action->secondary;

        if (WARN_ON_ONCE(!secondary))
                return;

        guard(raw_spinlock_irq)(&desc->lock);
        __irq_wake_thread(desc, secondary);
}

/*
 * Internal function to notify that a interrupt thread is ready.
 */
static void irq_thread_set_ready(struct irq_desc *desc,
                                 struct irqaction *action)
{
        set_bit(IRQTF_READY, &action->thread_flags);
        wake_up(&desc->wait_for_threads);
}

/*
 * Internal function to wake up a interrupt thread and wait until it is
 * ready.
 */
static void wake_up_and_wait_for_irq_thread_ready(struct irq_desc *desc,
                                                  struct irqaction *action)
{
        if (!action || !action->thread)
                return;

        wake_up_process(action->thread);
        wait_event(desc->wait_for_threads,
                   test_bit(IRQTF_READY, &action->thread_flags));
}

/*
 * Interrupt handler thread
 */
static int irq_thread(void *data)
{
        struct callback_head on_exit_work;
        struct irqaction *action = data;
        struct irq_desc *desc = irq_to_desc(action->irq);
        irqreturn_t (*handler_fn)(struct irq_desc *desc,
                        struct irqaction *action);

        irq_thread_set_ready(desc, action);

        if (action->handler == irq_forced_secondary_handler)
                sched_set_fifo_secondary(current);
        else
                sched_set_fifo(current);

        if (force_irqthreads() && test_bit(IRQTF_FORCED_THREAD,
                                           &action->thread_flags))
                handler_fn = irq_forced_thread_fn;
        else
                handler_fn = irq_thread_fn;

        init_task_work(&on_exit_work, irq_thread_dtor);
        task_work_add(current, &on_exit_work, TWA_NONE);

        while (!irq_wait_for_interrupt(desc, action)) {
                irqreturn_t action_ret;

                action_ret = handler_fn(desc, action);
                if (action_ret == IRQ_WAKE_THREAD)
                        irq_wake_secondary(desc, action);

                wake_threads_waitq(desc);
        }

        /*
         * This is the regular exit path. __free_irq() is stopping the
         * thread via kthread_stop() after calling
         * synchronize_hardirq(). So neither IRQTF_RUNTHREAD nor the
         * oneshot mask bit can be set.
         */
        task_work_cancel_func(current, irq_thread_dtor);
        return 0;
}

/**
 * irq_wake_thread - wake the irq thread for the action identified by dev_id
 * @irq:        Interrupt line
 * @dev_id:     Device identity for which the thread should be woken
 */
void irq_wake_thread(unsigned int irq, void *dev_id)
{
        struct irq_desc *desc = irq_to_desc(irq);
        struct irqaction *action;

        if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
                return;

        guard(raw_spinlock_irqsave)(&desc->lock);
        for_each_action_of_desc(desc, action) {
                if (action->dev_id == dev_id) {
                        if (action->thread)
                                __irq_wake_thread(desc, action);
                        break;
                }
        }
}
EXPORT_SYMBOL_GPL(irq_wake_thread);

static int irq_setup_forced_threading(struct irqaction *new)
{
        if (!force_irqthreads())
                return 0;
        if (new->flags & (IRQF_NO_THREAD | IRQF_PERCPU | IRQF_ONESHOT))
                return 0;

        /*
         * No further action required for interrupts which are requested as
         * threaded interrupts already
         */
        if (new->handler == irq_default_primary_handler)
                return 0;

        new->flags |= IRQF_ONESHOT;

        /*
         * Handle the case where we have a real primary handler and a
         * thread handler. We force thread them as well by creating a
         * secondary action.
         */
        if (new->handler && new->thread_fn) {
                /* Allocate the secondary action */
                new->secondary = kzalloc_obj(struct irqaction);
                if (!new->secondary)
                        return -ENOMEM;
                new->secondary->handler = irq_forced_secondary_handler;
                new->secondary->thread_fn = new->thread_fn;
                new->secondary->dev_id = new->dev_id;
                new->secondary->irq = new->irq;
                new->secondary->name = new->name;
        }
        /* Deal with the primary handler */
        set_bit(IRQTF_FORCED_THREAD, &new->thread_flags);
        new->thread_fn = new->handler;
        new->handler = irq_default_primary_handler;
        return 0;
}

static int irq_request_resources(struct irq_desc *desc)
{
        struct irq_data *d = &desc->irq_data;
        struct irq_chip *c = d->chip;

        return c->irq_request_resources ? c->irq_request_resources(d) : 0;
}

static void irq_release_resources(struct irq_desc *desc)
{
        struct irq_data *d = &desc->irq_data;
        struct irq_chip *c = d->chip;

        if (c->irq_release_resources)
                c->irq_release_resources(d);
}

static bool irq_supports_nmi(struct irq_desc *desc)
{
        struct irq_data *d = irq_desc_get_irq_data(desc);

#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
        /* Only IRQs directly managed by the root irqchip can be set as NMI */
        if (d->parent_data)
                return false;
#endif
        /* Don't support NMIs for chips behind a slow bus */
        if (d->chip->irq_bus_lock || d->chip->irq_bus_sync_unlock)
                return false;

        return d->chip->flags & IRQCHIP_SUPPORTS_NMI;
}

static int irq_nmi_setup(struct irq_desc *desc)
{
        struct irq_data *d = irq_desc_get_irq_data(desc);
        struct irq_chip *c = d->chip;

        return c->irq_nmi_setup ? c->irq_nmi_setup(d) : -EINVAL;
}

static void irq_nmi_teardown(struct irq_desc *desc)
{
        struct irq_data *d = irq_desc_get_irq_data(desc);
        struct irq_chip *c = d->chip;

        if (c->irq_nmi_teardown)
                c->irq_nmi_teardown(d);
}

static int
setup_irq_thread(struct irqaction *new, unsigned int irq, bool secondary)
{
        struct task_struct *t;

        if (!secondary) {
                t = kthread_create(irq_thread, new, "irq/%d-%s", irq,
                                   new->name);
        } else {
                t = kthread_create(irq_thread, new, "irq/%d-s-%s", irq,
                                   new->name);
        }

        if (IS_ERR(t))
                return PTR_ERR(t);

        /*
         * We keep the reference to the task struct even if
         * the thread dies to avoid that the interrupt code
         * references an already freed task_struct.
         */
        new->thread = get_task_struct(t);

        /*
         * The affinity can not be established yet, but it will be once the
         * interrupt is enabled. Delay and defer the actual setting to the
         * thread itself once it is ready to run. In the meantime, prevent
         * it from ever being re-affined directly by cpuset or
         * housekeeping. The proper way to do it is to re-affine the whole
         * vector.
         */
        kthread_bind_mask(t, cpu_possible_mask);

        /*
         * Ensure the thread adjusts the affinity once it reaches the
         * thread function.
         */
        set_bit(IRQTF_AFFINITY, &new->thread_flags);

        return 0;
}

static bool valid_percpu_irqaction(struct irqaction *old, struct irqaction *new)
{
        do {
                if (cpumask_intersects(old->affinity, new->affinity) ||
                    old->percpu_dev_id == new->percpu_dev_id)
                        return false;

                old = old->next;
        } while (old);

        return true;
}

/*
 * Internal function to register an irqaction - typically used to
 * allocate special interrupts that are part of the architecture.
 *
 * Locking rules:
 *
 * desc->request_mutex  Provides serialization against a concurrent free_irq()
 *   chip_bus_lock      Provides serialization for slow bus operations
 *     desc->lock       Provides serialization against hard interrupts
 *
 * chip_bus_lock and desc->lock are sufficient for all other management and
 * interrupt related functions. desc->request_mutex solely serializes
 * request/free_irq().
 */
static int
__setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
{
        struct irqaction *old, **old_ptr;
        unsigned long flags, thread_mask = 0;
        int ret, nested, shared = 0;
        bool per_cpu_devid;

        if (!desc)
                return -EINVAL;

        if (desc->irq_data.chip == &no_irq_chip)
                return -ENOSYS;
        if (!try_module_get(desc->owner))
                return -ENODEV;

        per_cpu_devid = irq_settings_is_per_cpu_devid(desc);

        new->irq = irq;

        /*
         * If the trigger type is not specified by the caller,
         * then use the default for this interrupt.
         */
        if (!(new->flags & IRQF_TRIGGER_MASK))
                new->flags |= irqd_get_trigger_type(&desc->irq_data);

        /*
         * IRQF_ONESHOT means the interrupt source in the IRQ chip will be
         * masked until the threaded handled is done. If there is no thread
         * handler then it makes no sense to have IRQF_ONESHOT.
         */
        WARN_ON_ONCE(new->flags & IRQF_ONESHOT && !new->thread_fn);

        /*
         * Check whether the interrupt nests into another interrupt
         * thread.
         */
        nested = irq_settings_is_nested_thread(desc);
        if (nested) {
                if (!new->thread_fn) {
                        ret = -EINVAL;
                        goto out_mput;
                }
                /*
                 * Replace the primary handler which was provided from
                 * the driver for non nested interrupt handling by the
                 * dummy function which warns when called.
                 */
                new->handler = irq_nested_primary_handler;
        } else {
                if (irq_settings_can_thread(desc)) {
                        ret = irq_setup_forced_threading(new);
                        if (ret)
                                goto out_mput;
                }
        }

        /*
         * Create a handler thread when a thread function is supplied
         * and the interrupt does not nest into another interrupt
         * thread.
         */
        if (new->thread_fn && !nested) {
                ret = setup_irq_thread(new, irq, false);
                if (ret)
                        goto out_mput;
                if (new->secondary) {
                        ret = setup_irq_thread(new->secondary, irq, true);
                        if (ret)
                                goto out_thread;
                }
        }

        /*
         * Drivers are often written to work w/o knowledge about the
         * underlying irq chip implementation, so a request for a
         * threaded irq without a primary hard irq context handler
         * requires the ONESHOT flag to be set. Some irq chips like
         * MSI based interrupts are per se one shot safe. Check the
         * chip flags, so we can avoid the unmask dance at the end of
         * the threaded handler for those.
         */
        if (desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)
                new->flags &= ~IRQF_ONESHOT;

        /*
         * Protects against a concurrent __free_irq() call which might wait
         * for synchronize_hardirq() to complete without holding the optional
         * chip bus lock and desc->lock. Also protects against handing out
         * a recycled oneshot thread_mask bit while it's still in use by
         * its previous owner.
         */
        mutex_lock(&desc->request_mutex);

        /*
         * Acquire bus lock as the irq_request_resources() callback below
         * might rely on the serialization or the magic power management
         * functions which are abusing the irq_bus_lock() callback,
         */
        chip_bus_lock(desc);

        /* First installed action requests resources. */
        if (!desc->action) {
                ret = irq_request_resources(desc);
                if (ret) {
                        pr_err("Failed to request resources for %s (irq %d) on irqchip %s\n",
                               new->name, irq, desc->irq_data.chip->name);
                        goto out_bus_unlock;
                }
        }

        /*
         * The following block of code has to be executed atomically
         * protected against a concurrent interrupt and any of the other
         * management calls which are not serialized via
         * desc->request_mutex or the optional bus lock.
         */
        raw_spin_lock_irqsave(&desc->lock, flags);
        old_ptr = &desc->action;
        old = *old_ptr;
        if (old) {
                /*
                 * Can't share interrupts unless both agree to and are
                 * the same type (level, edge, polarity). So both flag
                 * fields must have IRQF_SHARED set and the bits which
                 * set the trigger type must match. Also all must
                 * agree on ONESHOT.
                 * Interrupt lines used for NMIs cannot be shared.
                 */
                unsigned int oldtype;

                if (irq_is_nmi(desc) && !per_cpu_devid) {
                        pr_err("Invalid attempt to share NMI for %s (irq %d) on irqchip %s.\n",
                                new->name, irq, desc->irq_data.chip->name);
                        ret = -EINVAL;
                        goto out_unlock;
                }

                if (per_cpu_devid && !valid_percpu_irqaction(old, new)) {
                        pr_err("Overlapping affinities for %s (irq %d) on irqchip %s.\n",
                                new->name, irq, desc->irq_data.chip->name);
                        ret = -EINVAL;
                        goto out_unlock;
                }

                /*
                 * If nobody did set the configuration before, inherit
                 * the one provided by the requester.
                 */
                if (irqd_trigger_type_was_set(&desc->irq_data)) {
                        oldtype = irqd_get_trigger_type(&desc->irq_data);
                } else {
                        oldtype = new->flags & IRQF_TRIGGER_MASK;
                        irqd_set_trigger_type(&desc->irq_data, oldtype);
                }

                if (!((old->flags & new->flags) & IRQF_SHARED) ||
                    (oldtype != (new->flags & IRQF_TRIGGER_MASK)))
                        goto mismatch;

                if ((old->flags & IRQF_ONESHOT) &&
                    (new->flags & IRQF_COND_ONESHOT))
                        new->flags |= IRQF_ONESHOT;
                else if ((old->flags ^ new->flags) & IRQF_ONESHOT)
                        goto mismatch;

                /* All handlers must agree on per-cpuness */
                if ((old->flags & IRQF_PERCPU) !=
                    (new->flags & IRQF_PERCPU))
                        goto mismatch;

                /* add new interrupt at end of irq queue */
                do {
                        /*
                         * Or all existing action->thread_mask bits,
                         * so we can find the next zero bit for this
                         * new action.
                         */
                        thread_mask |= old->thread_mask;
                        old_ptr = &old->next;
                        old = *old_ptr;
                } while (old);
                shared = 1;
        }

        /*
         * Setup the thread mask for this irqaction for ONESHOT. For
         * !ONESHOT irqs the thread mask is 0 so we can avoid a
         * conditional in irq_wake_thread().
         */
        if (new->flags & IRQF_ONESHOT) {
                /*
                 * Unlikely to have 32 resp 64 irqs sharing one line,
                 * but who knows.
                 */
                if (thread_mask == ~0UL) {
                        ret = -EBUSY;
                        goto out_unlock;
                }
                /*
                 * The thread_mask for the action is or'ed to
                 * desc->thread_active to indicate that the
                 * IRQF_ONESHOT thread handler has been woken, but not
                 * yet finished. The bit is cleared when a thread
                 * completes. When all threads of a shared interrupt
                 * line have completed desc->threads_active becomes
                 * zero and the interrupt line is unmasked. See
                 * handle.c:irq_wake_thread() for further information.
                 *
                 * If no thread is woken by primary (hard irq context)
                 * interrupt handlers, then desc->threads_active is
                 * also checked for zero to unmask the irq line in the
                 * affected hard irq flow handlers
                 * (handle_[fasteoi|level]_irq).
                 *
                 * The new action gets the first zero bit of
                 * thread_mask assigned. See the loop above which or's
                 * all existing action->thread_mask bits.
                 */
                new->thread_mask = 1UL << ffz(thread_mask);

        } else if (new->handler == irq_default_primary_handler &&
                   !(desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)) {
                /*
                 * The interrupt was requested with handler = NULL, so
                 * we use the default primary handler for it. But it
                 * does not have the oneshot flag set. In combination
                 * with level interrupts this is deadly, because the
                 * default primary handler just wakes the thread, then
                 * the irq lines is reenabled, but the device still
                 * has the level irq asserted. Rinse and repeat....
                 *
                 * While this works for edge type interrupts, we play
                 * it safe and reject unconditionally because we can't
                 * say for sure which type this interrupt really
                 * has. The type flags are unreliable as the
                 * underlying chip implementation can override them.
                 */
                pr_err("Threaded irq requested with handler=NULL and !ONESHOT for %s (irq %d)\n",
                       new->name, irq);
                ret = -EINVAL;
                goto out_unlock;
        }

        if (!shared) {
                /* Setup the type (level, edge polarity) if configured: */
                if (new->flags & IRQF_TRIGGER_MASK) {
                        ret = __irq_set_trigger(desc,
                                                new->flags & IRQF_TRIGGER_MASK);

                        if (ret)
                                goto out_unlock;
                }

                /*
                 * Activate the interrupt. That activation must happen
                 * independently of IRQ_NOAUTOEN. request_irq() can fail
                 * and the callers are supposed to handle
                 * that. enable_irq() of an interrupt requested with
                 * IRQ_NOAUTOEN is not supposed to fail. The activation
                 * keeps it in shutdown mode, it merily associates
                 * resources if necessary and if that's not possible it
                 * fails. Interrupts which are in managed shutdown mode
                 * will simply ignore that activation request.
                 */
                ret = irq_activate(desc);
                if (ret)
                        goto out_unlock;

                desc->istate &= ~(IRQS_AUTODETECT | IRQS_SPURIOUS_DISABLED | \
                                  IRQS_ONESHOT | IRQS_WAITING);
                irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);

                if (new->flags & IRQF_PERCPU) {
                        irqd_set(&desc->irq_data, IRQD_PER_CPU);
                        irq_settings_set_per_cpu(desc);
                        if (new->flags & IRQF_NO_DEBUG)
                                irq_settings_set_no_debug(desc);
                }

                if (noirqdebug)
                        irq_settings_set_no_debug(desc);

                if (new->flags & IRQF_ONESHOT)
                        desc->istate |= IRQS_ONESHOT;

                /* Exclude IRQ from balancing if requested */
                if (new->flags & IRQF_NOBALANCING) {
                        irq_settings_set_no_balancing(desc);
                        irqd_set(&desc->irq_data, IRQD_NO_BALANCING);
                }

                if (!(new->flags & IRQF_NO_AUTOEN) &&
                    irq_settings_can_autoenable(desc)) {
                        irq_startup(desc, IRQ_RESEND, IRQ_START_COND);
                } else if (!per_cpu_devid) {
                        /*
                         * Shared interrupts do not go well with disabling
                         * auto enable. The sharing interrupt might request
                         * it while it's still disabled and then wait for
                         * interrupts forever.
                         */
                        WARN_ON_ONCE(new->flags & IRQF_SHARED);
                        /* Undo nested disables: */
                        desc->depth = 1;
                }

        } else if (new->flags & IRQF_TRIGGER_MASK) {
                unsigned int nmsk = new->flags & IRQF_TRIGGER_MASK;
                unsigned int omsk = irqd_get_trigger_type(&desc->irq_data);

                if (nmsk != omsk)
                        /* hope the handler works with current  trigger mode */
                        pr_warn("irq %d uses trigger mode %u; requested %u\n",
                                irq, omsk, nmsk);
        }

        *old_ptr = new;

        irq_pm_install_action(desc, new);

        /* Reset broken irq detection when installing new handler */
        desc->irq_count = 0;
        desc->irqs_unhandled = 0;

        /*
         * Check whether we disabled the irq via the spurious handler
         * before. Reenable it and give it another chance.
         */
        if (shared && (desc->istate & IRQS_SPURIOUS_DISABLED)) {
                desc->istate &= ~IRQS_SPURIOUS_DISABLED;
                __enable_irq(desc);
        }

        raw_spin_unlock_irqrestore(&desc->lock, flags);
        chip_bus_sync_unlock(desc);
        mutex_unlock(&desc->request_mutex);

        wake_up_and_wait_for_irq_thread_ready(desc, new);
        wake_up_and_wait_for_irq_thread_ready(desc, new->secondary);

        register_irq_proc(irq, desc);
        new->dir = NULL;
        register_handler_proc(irq, new);
        return 0;

mismatch:
        if (!(new->flags & IRQF_PROBE_SHARED)) {
                pr_err("Flags mismatch irq %d. %08x (%s) vs. %08x (%s)\n",
                       irq, new->flags, new->name, old->flags, old->name);
#ifdef CONFIG_DEBUG_SHIRQ
                dump_stack();
#endif
        }
        ret = -EBUSY;

out_unlock:
        raw_spin_unlock_irqrestore(&desc->lock, flags);

        if (!desc->action)
                irq_release_resources(desc);
out_bus_unlock:
        chip_bus_sync_unlock(desc);
        mutex_unlock(&desc->request_mutex);

out_thread:
        if (new->thread) {
                struct task_struct *t = new->thread;

                new->thread = NULL;
                kthread_stop_put(t);
        }
        if (new->secondary && new->secondary->thread) {
                struct task_struct *t = new->secondary->thread;

                new->secondary->thread = NULL;
                kthread_stop_put(t);
        }
out_mput:
        module_put(desc->owner);
        return ret;
}

/*
 * Internal function to unregister an irqaction - used to free
 * regular and special interrupts that are part of the architecture.
 */
static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id)
{
        unsigned irq = desc->irq_data.irq;
        struct irqaction *action, **action_ptr;
        unsigned long flags;

        WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);

        mutex_lock(&desc->request_mutex);
        chip_bus_lock(desc);
        raw_spin_lock_irqsave(&desc->lock, flags);

        /*
         * There can be multiple actions per IRQ descriptor, find the right
         * one based on the dev_id:
         */
        action_ptr = &desc->action;
        for (;;) {
                action = *action_ptr;

                if (!action) {
                        WARN(1, "Trying to free already-free IRQ %d\n", irq);
                        raw_spin_unlock_irqrestore(&desc->lock, flags);
                        chip_bus_sync_unlock(desc);
                        mutex_unlock(&desc->request_mutex);
                        return NULL;
                }

                if (action->dev_id == dev_id)
                        break;
                action_ptr = &action->next;
        }

        /* Found it - now remove it from the list of entries: */
        *action_ptr = action->next;

        irq_pm_remove_action(desc, action);

        /* If this was the last handler, shut down the IRQ line: */
        if (!desc->action) {
                irq_settings_clr_disable_unlazy(desc);
                /* Only shutdown. Deactivate after synchronize_hardirq() */
                irq_shutdown(desc);
        }

#ifdef CONFIG_SMP
        /* make sure affinity_hint is cleaned up */
        if (WARN_ON_ONCE(desc->affinity_hint))
                desc->affinity_hint = NULL;
#endif

        raw_spin_unlock_irqrestore(&desc->lock, flags);
        /*
         * Drop bus_lock here so the changes which were done in the chip
         * callbacks above are synced out to the irq chips which hang
         * behind a slow bus (I2C, SPI) before calling synchronize_hardirq().
         *
         * Aside of that the bus_lock can also be taken from the threaded
         * handler in irq_finalize_oneshot() which results in a deadlock
         * because kthread_stop() would wait forever for the thread to
         * complete, which is blocked on the bus lock.
         *
         * The still held desc->request_mutex() protects against a
         * concurrent request_irq() of this irq so the release of resources
         * and timing data is properly serialized.
         */
        chip_bus_sync_unlock(desc);

        unregister_handler_proc(irq, action);

        /*
         * Make sure it's not being used on another CPU and if the chip
         * supports it also make sure that there is no (not yet serviced)
         * interrupt in flight at the hardware level.
         */
        __synchronize_irq(desc);

#ifdef CONFIG_DEBUG_SHIRQ
        /*
         * It's a shared IRQ -- the driver ought to be prepared for an IRQ
         * event to happen even now it's being freed, so let's make sure that
         * is so by doing an extra call to the handler ....
         *
         * ( We do this after actually deregistering it, to make sure that a
         *   'real' IRQ doesn't run in parallel with our fake. )
         */
        if (action->flags & IRQF_SHARED) {
                local_irq_save(flags);
                action->handler(irq, dev_id);
                local_irq_restore(flags);
        }
#endif

        /*
         * The action has already been removed above, but the thread writes
         * its oneshot mask bit when it completes. Though request_mutex is
         * held across this which prevents __setup_irq() from handing out
         * the same bit to a newly requested action.
         */
        if (action->thread) {
                kthread_stop_put(action->thread);
                if (action->secondary && action->secondary->thread)
                        kthread_stop_put(action->secondary->thread);
        }

        /* Last action releases resources */
        if (!desc->action) {
                /*
                 * Reacquire bus lock as irq_release_resources() might
                 * require it to deallocate resources over the slow bus.
                 */
                chip_bus_lock(desc);
                /*
                 * There is no interrupt on the fly anymore. Deactivate it
                 * completely.
                 */
                scoped_guard(raw_spinlock_irqsave, &desc->lock)
                        irq_domain_deactivate_irq(&desc->irq_data);

                irq_release_resources(desc);
                chip_bus_sync_unlock(desc);
        }

        mutex_unlock(&desc->request_mutex);

        irq_chip_pm_put(&desc->irq_data);
        module_put(desc->owner);
        kfree(action->secondary);
        return action;
}

/**
 * free_irq - free an interrupt allocated with request_irq
 * @irq:        Interrupt line to free
 * @dev_id:     Device identity to free
 *
 * Remove an interrupt handler. The handler is removed and if the interrupt
 * line is no longer in use by any driver it is disabled.  On a shared IRQ
 * the caller must ensure the interrupt is disabled on the card it drives
 * before calling this function. The function does not return until any
 * executing interrupts for this IRQ have completed.
 *
 * This function must not be called from interrupt context.
 *
 * Returns the devname argument passed to request_irq.
 */
const void *free_irq(unsigned int irq, void *dev_id)
{
        struct irq_desc *desc = irq_to_desc(irq);
        struct irqaction *action;
        const char *devname;

        if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
                return NULL;

#ifdef CONFIG_SMP
        if (WARN_ON(desc->affinity_notify))
                desc->affinity_notify = NULL;
#endif

        action = __free_irq(desc, dev_id);

        if (!action)
                return NULL;

        devname = action->name;
        kfree(action);
        return devname;
}
EXPORT_SYMBOL(free_irq);

/* This function must be called with desc->lock held */
static const void *__cleanup_nmi(unsigned int irq, struct irq_desc *desc)
{
        const char *devname = NULL;

        desc->istate &= ~IRQS_NMI;

        if (!WARN_ON(desc->action == NULL)) {
                irq_pm_remove_action(desc, desc->action);
                devname = desc->action->name;
                unregister_handler_proc(irq, desc->action);

                kfree(desc->action);
                desc->action = NULL;
        }

        irq_settings_clr_disable_unlazy(desc);
        irq_shutdown_and_deactivate(desc);

        irq_release_resources(desc);

        irq_chip_pm_put(&desc->irq_data);
        module_put(desc->owner);

        return devname;
}

const void *free_nmi(unsigned int irq, void *dev_id)
{
        struct irq_desc *desc = irq_to_desc(irq);

        if (!desc || WARN_ON(!irq_is_nmi(desc)))
                return NULL;

        if (WARN_ON(irq_settings_is_per_cpu_devid(desc)))
                return NULL;

        /* NMI still enabled */
        if (WARN_ON(desc->depth == 0))
                disable_nmi_nosync(irq);

        guard(raw_spinlock_irqsave)(&desc->lock);
        irq_nmi_teardown(desc);
        return __cleanup_nmi(irq, desc);
}

/**
 * request_threaded_irq - allocate an interrupt line
 * @irq:        Interrupt line to allocate
 * @handler:    Function to be called when the IRQ occurs.
 *              Primary handler for threaded interrupts.
 *              If handler is NULL and thread_fn != NULL
 *              the default primary handler is installed.
 * @thread_fn:  Function called from the irq handler thread
 *              If NULL, no irq thread is created
 * @irqflags:   Interrupt type flags
 * @devname:    An ascii name for the claiming device
 * @dev_id:     A cookie passed back to the handler function
 *
 * This call allocates interrupt resources and enables the interrupt line
 * and IRQ handling. From the point this call is made your handler function
 * may be invoked. Since your handler function must clear any interrupt the
 * board raises, you must take care both to initialise your hardware and to
 * set up the interrupt handler in the right order.
 *
 * If you want to set up a threaded irq handler for your device then you
 * need to supply @handler and @thread_fn. @handler is still called in hard
 * interrupt context and has to check whether the interrupt originates from
 * the device. If yes it needs to disable the interrupt on the device and
 * return IRQ_WAKE_THREAD which will wake up the handler thread and run
 * @thread_fn. This split handler design is necessary to support shared
 * interrupts.
 *
 * @dev_id must be globally unique. Normally the address of the device data
 * structure is used as the cookie. Since the handler receives this value
 * it makes sense to use it.
 *
 * If your interrupt is shared you must pass a non NULL dev_id as this is
 * required when freeing the interrupt.
 *
 * Flags:
 *
 *      IRQF_SHARED             Interrupt is shared
 *      IRQF_TRIGGER_*          Specify active edge(s) or level
 *      IRQF_ONESHOT            Run thread_fn with interrupt line masked
 */
int request_threaded_irq(unsigned int irq, irq_handler_t handler,
                         irq_handler_t thread_fn, unsigned long irqflags,
                         const char *devname, void *dev_id)
{
        struct irqaction *action;
        struct irq_desc *desc;
        int retval;

        if (irq == IRQ_NOTCONNECTED)
                return -ENOTCONN;

        /*
         * Sanity-check: shared interrupts must pass in a real dev-ID,
         * otherwise we'll have trouble later trying to figure out
         * which interrupt is which (messes up the interrupt freeing
         * logic etc).
         *
         * Also shared interrupts do not go well with disabling auto enable.
         * The sharing interrupt might request it while it's still disabled
         * and then wait for interrupts forever.
         *
         * Also IRQF_COND_SUSPEND only makes sense for shared interrupts and
         * it cannot be set along with IRQF_NO_SUSPEND.
         */
        if (((irqflags & IRQF_SHARED) && !dev_id) ||
            ((irqflags & IRQF_SHARED) && (irqflags & IRQF_NO_AUTOEN)) ||
            (!(irqflags & IRQF_SHARED) && (irqflags & IRQF_COND_SUSPEND)) ||
            ((irqflags & IRQF_NO_SUSPEND) && (irqflags & IRQF_COND_SUSPEND)))
                return -EINVAL;

        desc = irq_to_desc(irq);
        if (!desc)
                return -EINVAL;

        if (!irq_settings_can_request(desc) ||
            WARN_ON(irq_settings_is_per_cpu_devid(desc)))
                return -EINVAL;

        if (!handler) {
                if (!thread_fn)
                        return -EINVAL;
                handler = irq_default_primary_handler;
        }

        action = kzalloc_obj(struct irqaction);
        if (!action)
                return -ENOMEM;

        action->handler = handler;
        action->thread_fn = thread_fn;
        action->flags = irqflags;
        action->name = devname;
        action->dev_id = dev_id;

        retval = irq_chip_pm_get(&desc->irq_data);
        if (retval < 0) {
                kfree(action);
                return retval;
        }

        retval = __setup_irq(irq, desc, action);

        if (retval) {
                irq_chip_pm_put(&desc->irq_data);
                kfree(action->secondary);
                kfree(action);
        }

#ifdef CONFIG_DEBUG_SHIRQ_FIXME
        if (!retval && (irqflags & IRQF_SHARED)) {
                /*
                 * It's a shared IRQ -- the driver ought to be prepared for it
                 * to happen immediately, so let's make sure....
                 * We disable the irq to make sure that a 'real' IRQ doesn't
                 * run in parallel with our fake.
                 */
                unsigned long flags;

                disable_irq(irq);
                local_irq_save(flags);

                handler(irq, dev_id);

                local_irq_restore(flags);
                enable_irq(irq);
        }
#endif
        return retval;
}
EXPORT_SYMBOL(request_threaded_irq);

/**
 * request_any_context_irq - allocate an interrupt line
 * @irq:        Interrupt line to allocate
 * @handler:    Function to be called when the IRQ occurs.
 *              Threaded handler for threaded interrupts.
 * @flags:      Interrupt type flags
 * @name:       An ascii name for the claiming device
 * @dev_id:     A cookie passed back to the handler function
 *
 * This call allocates interrupt resources and enables the interrupt line
 * and IRQ handling. It selects either a hardirq or threaded handling
 * method depending on the context.
 *
 * Returns: On failure, it returns a negative value. On success, it returns either
 * IRQC_IS_HARDIRQ or IRQC_IS_NESTED.
 */
int request_any_context_irq(unsigned int irq, irq_handler_t handler,
                            unsigned long flags, const char *name, void *dev_id)
{
        struct irq_desc *desc;
        int ret;

        if (irq == IRQ_NOTCONNECTED)
                return -ENOTCONN;

        desc = irq_to_desc(irq);
        if (!desc)
                return -EINVAL;

        if (irq_settings_is_nested_thread(desc)) {
                ret = request_threaded_irq(irq, NULL, handler,
                                           flags, name, dev_id);
                return !ret ? IRQC_IS_NESTED : ret;
        }

        ret = request_irq(irq, handler, flags, name, dev_id);
        return !ret ? IRQC_IS_HARDIRQ : ret;
}
EXPORT_SYMBOL_GPL(request_any_context_irq);

/**
 * request_nmi - allocate an interrupt line for NMI delivery
 * @irq:        Interrupt line to allocate
 * @handler:    Function to be called when the IRQ occurs.
 *              Threaded handler for threaded interrupts.
 * @irqflags:   Interrupt type flags
 * @name:       An ascii name for the claiming device
 * @dev_id:     A cookie passed back to the handler function
 *
 * This call allocates interrupt resources and enables the interrupt line
 * and IRQ handling. It sets up the IRQ line to be handled as an NMI.
 *
 * An interrupt line delivering NMIs cannot be shared and IRQ handling
 * cannot be threaded.
 *
 * Interrupt lines requested for NMI delivering must produce per cpu
 * interrupts and have auto enabling setting disabled.
 *
 * @dev_id must be globally unique. Normally the address of the device data
 * structure is used as the cookie. Since the handler receives this value
 * it makes sense to use it.
 *
 * If the interrupt line cannot be used to deliver NMIs, function will fail
 * and return a negative value.
 */
int request_nmi(unsigned int irq, irq_handler_t handler,
                unsigned long irqflags, const char *name, void *dev_id)
{
        struct irqaction *action;
        struct irq_desc *desc;
        int retval;

        if (irq == IRQ_NOTCONNECTED)
                return -ENOTCONN;

        /* NMI cannot be shared, used for Polling */
        if (irqflags & (IRQF_SHARED | IRQF_COND_SUSPEND | IRQF_IRQPOLL))
                return -EINVAL;

        if (!(irqflags & IRQF_PERCPU))
                return -EINVAL;

        if (!handler)
                return -EINVAL;

        desc = irq_to_desc(irq);

        if (!desc || (irq_settings_can_autoenable(desc) &&
            !(irqflags & IRQF_NO_AUTOEN)) ||
            !irq_settings_can_request(desc) ||
            WARN_ON(irq_settings_is_per_cpu_devid(desc)) ||
            !irq_supports_nmi(desc))
                return -EINVAL;

        action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
        if (!action)
                return -ENOMEM;

        action->handler = handler;
        action->flags = irqflags | IRQF_NO_THREAD | IRQF_NOBALANCING;
        action->name = name;
        action->dev_id = dev_id;

        retval = irq_chip_pm_get(&desc->irq_data);
        if (retval < 0)
                goto err_out;

        retval = __setup_irq(irq, desc, action);
        if (retval)
                goto err_irq_setup;

        scoped_guard(raw_spinlock_irqsave, &desc->lock) {
                /* Setup NMI state */
                desc->istate |= IRQS_NMI;
                retval = irq_nmi_setup(desc);
                if (retval) {
                        __cleanup_nmi(irq, desc);
                        return -EINVAL;
                }
                return 0;
        }

err_irq_setup:
        irq_chip_pm_put(&desc->irq_data);
err_out:
        kfree(action);

        return retval;
}

void enable_percpu_irq(unsigned int irq, unsigned int type)
{
        scoped_irqdesc_get_and_lock(irq, IRQ_GET_DESC_CHECK_PERCPU) {
                struct irq_desc *desc = scoped_irqdesc;

                /*
                 * If the trigger type is not specified by the caller, then
                 * use the default for this interrupt.
                 */
                type &= IRQ_TYPE_SENSE_MASK;
                if (type == IRQ_TYPE_NONE)
                        type = irqd_get_trigger_type(&desc->irq_data);

                if (type != IRQ_TYPE_NONE) {
                        if (__irq_set_trigger(desc, type)) {
                                WARN(1, "failed to set type for IRQ%d\n", irq);
                                return;
                        }
                }
                irq_percpu_enable(desc, smp_processor_id());
        }
}
EXPORT_SYMBOL_GPL(enable_percpu_irq);

void enable_percpu_nmi(unsigned int irq, unsigned int type)
{
        enable_percpu_irq(irq, type);
}

/**
 * irq_percpu_is_enabled - Check whether the per cpu irq is enabled
 * @irq:        Linux irq number to check for
 *
 * Must be called from a non migratable context. Returns the enable
 * state of a per cpu interrupt on the current cpu.
 */
bool irq_percpu_is_enabled(unsigned int irq)
{
        scoped_irqdesc_get_and_lock(irq, IRQ_GET_DESC_CHECK_PERCPU)
                return cpumask_test_cpu(smp_processor_id(), scoped_irqdesc->percpu_enabled);
        return false;
}
EXPORT_SYMBOL_GPL(irq_percpu_is_enabled);

void disable_percpu_irq(unsigned int irq)
{
        scoped_irqdesc_get_and_lock(irq, IRQ_GET_DESC_CHECK_PERCPU)
                irq_percpu_disable(scoped_irqdesc, smp_processor_id());
}
EXPORT_SYMBOL_GPL(disable_percpu_irq);

void disable_percpu_nmi(unsigned int irq)
{
        disable_percpu_irq(irq);
}

/*
 * Internal function to unregister a percpu irqaction.
 */
static struct irqaction *__free_percpu_irq(unsigned int irq, void __percpu *dev_id)
{
        struct irq_desc *desc = irq_to_desc(irq);
        struct irqaction *action, **action_ptr;

        WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);

        if (!desc)
                return NULL;

        scoped_guard(raw_spinlock_irqsave, &desc->lock) {
                action_ptr = &desc->action;
                for (;;) {
                        action = *action_ptr;

                        if (!action) {
                                WARN(1, "Trying to free already-free IRQ %d\n", irq);
                                return NULL;
                        }

                        if (action->percpu_dev_id == dev_id)
                                break;

                        action_ptr = &action->next;
                }

                if (cpumask_intersects(desc->percpu_enabled, action->affinity)) {
                        WARN(1, "percpu IRQ %d still enabled on CPU%d!\n", irq,
                             cpumask_first_and(desc->percpu_enabled, action->affinity));
                        return NULL;
                }

                /* Found it - now remove it from the list of entries: */
                *action_ptr = action->next;

                /* Demote from NMI if we killed the last action */
                if (!desc->action)
                        desc->istate &= ~IRQS_NMI;
        }

        unregister_handler_proc(irq, action);
        irq_chip_pm_put(&desc->irq_data);
        module_put(desc->owner);
        return action;
}

/**
 * free_percpu_irq - free an interrupt allocated with request_percpu_irq
 * @irq:        Interrupt line to free
 * @dev_id:     Device identity to free
 *
 * Remove a percpu interrupt handler. The handler is removed, but the
 * interrupt line is not disabled. This must be done on each CPU before
 * calling this function. The function does not return until any executing
 * interrupts for this IRQ have completed.
 *
 * This function must not be called from interrupt context.
 */
void free_percpu_irq(unsigned int irq, void __percpu *dev_id)
{
        struct irq_desc *desc = irq_to_desc(irq);

        if (!desc || !irq_settings_is_per_cpu_devid(desc))
                return;

        chip_bus_lock(desc);
        kfree(__free_percpu_irq(irq, dev_id));
        chip_bus_sync_unlock(desc);
}
EXPORT_SYMBOL_GPL(free_percpu_irq);

void free_percpu_nmi(unsigned int irq, void __percpu *dev_id)
{
        struct irq_desc *desc = irq_to_desc(irq);

        if (!desc || !irq_settings_is_per_cpu_devid(desc))
                return;

        if (WARN_ON(!irq_is_nmi(desc)))
                return;

        kfree(__free_percpu_irq(irq, dev_id));
}

static
struct irqaction *create_percpu_irqaction(irq_handler_t handler, unsigned long flags,
                                          const char *devname, const cpumask_t *affinity,
                                          void __percpu *dev_id)
{
        struct irqaction *action;

        if (!affinity)
                affinity = cpu_possible_mask;

        action = kzalloc_obj(struct irqaction);
        if (!action)
                return NULL;

        action->handler = handler;
        action->flags = flags | IRQF_PERCPU | IRQF_NO_SUSPEND;
        action->name = devname;
        action->percpu_dev_id = dev_id;
        action->affinity = affinity;

        /*
         * We allow some form of sharing for non-overlapping affinity
         * masks. Obviously, covering all CPUs prevents any sharing in
         * the first place.
         */
        if (!cpumask_equal(affinity, cpu_possible_mask))
                action->flags |= IRQF_SHARED;

        return action;
}

/**
 * request_percpu_irq_affinity - allocate a percpu interrupt line
 * @irq:        Interrupt line to allocate
 * @handler:    Function to be called when the IRQ occurs.
 * @devname:    An ascii name for the claiming device
 * @affinity:   A cpumask describing the target CPUs for this interrupt
 * @dev_id:     A percpu cookie passed back to the handler function
 *
 * This call allocates interrupt resources, but doesn't enable the interrupt
 * on any CPU, as all percpu-devid interrupts are flagged with IRQ_NOAUTOEN.
 * It has to be done on each CPU using enable_percpu_irq().
 *
 * @dev_id must be globally unique. It is a per-cpu variable, and
 * the handler gets called with the interrupted CPU's instance of
 * that variable.
 */
int request_percpu_irq_affinity(unsigned int irq, irq_handler_t handler, const char *devname,
                                const cpumask_t *affinity, void __percpu *dev_id)
{
        struct irqaction *action;
        struct irq_desc *desc;
        int retval;

        if (!dev_id)
                return -EINVAL;

        desc = irq_to_desc(irq);
        if (!desc || !irq_settings_can_request(desc) ||
            !irq_settings_is_per_cpu_devid(desc))
                return -EINVAL;

        action = create_percpu_irqaction(handler, 0, devname, affinity, dev_id);
        if (!action)
                return -ENOMEM;

        retval = irq_chip_pm_get(&desc->irq_data);
        if (retval < 0) {
                kfree(action);
                return retval;
        }

        retval = __setup_irq(irq, desc, action);

        if (retval) {
                irq_chip_pm_put(&desc->irq_data);
                kfree(action);
        }

        return retval;
}
EXPORT_SYMBOL_GPL(request_percpu_irq_affinity);

/**
 * request_percpu_nmi - allocate a percpu interrupt line for NMI delivery
 * @irq:        Interrupt line to allocate
 * @handler:    Function to be called when the IRQ occurs.
 * @name:       An ascii name for the claiming device
 * @affinity:   A cpumask describing the target CPUs for this interrupt
 * @dev_id:     A percpu cookie passed back to the handler function
 *
 * This call allocates interrupt resources for a per CPU NMI. Per CPU NMIs
 * have to be setup on each CPU by calling prepare_percpu_nmi() before
 * being enabled on the same CPU by using enable_percpu_nmi().
 *
 * @dev_id must be globally unique. It is a per-cpu variable, and the
 * handler gets called with the interrupted CPU's instance of that
 * variable.
 *
 * Interrupt lines requested for NMI delivering should have auto enabling
 * setting disabled.
 *
 * If the interrupt line cannot be used to deliver NMIs, function
 * will fail returning a negative value.
 */
int request_percpu_nmi(unsigned int irq, irq_handler_t handler, const char *name,
                       const struct cpumask *affinity, void __percpu *dev_id)
{
        struct irqaction *action;
        struct irq_desc *desc;
        int retval;

        if (!handler)
                return -EINVAL;

        desc = irq_to_desc(irq);

        if (!desc || !irq_settings_can_request(desc) ||
            !irq_settings_is_per_cpu_devid(desc) ||
            irq_settings_can_autoenable(desc) ||
            !irq_supports_nmi(desc))
                return -EINVAL;

        /* The line cannot be NMI already if the new request covers all CPUs */
        if (irq_is_nmi(desc) &&
            (!affinity || cpumask_equal(affinity, cpu_possible_mask)))
                return -EINVAL;

        action = create_percpu_irqaction(handler, IRQF_NO_THREAD | IRQF_NOBALANCING,
                                         name, affinity, dev_id);
        if (!action)
                return -ENOMEM;

        retval = irq_chip_pm_get(&desc->irq_data);
        if (retval < 0)
                goto err_out;

        retval = __setup_irq(irq, desc, action);
        if (retval)
                goto err_irq_setup;

        scoped_guard(raw_spinlock_irqsave, &desc->lock)
                desc->istate |= IRQS_NMI;
        return 0;

err_irq_setup:
        irq_chip_pm_put(&desc->irq_data);
err_out:
        kfree(action);

        return retval;
}

/**
 * prepare_percpu_nmi - performs CPU local setup for NMI delivery
 * @irq: Interrupt line to prepare for NMI delivery
 *
 * This call prepares an interrupt line to deliver NMI on the current CPU,
 * before that interrupt line gets enabled with enable_percpu_nmi().
 *
 * As a CPU local operation, this should be called from non-preemptible
 * context.
 *
 * If the interrupt line cannot be used to deliver NMIs, function will fail
 * returning a negative value.
 */
int prepare_percpu_nmi(unsigned int irq)
{
        int ret = -EINVAL;

        WARN_ON(preemptible());

        scoped_irqdesc_get_and_lock(irq, IRQ_GET_DESC_CHECK_PERCPU) {
                if (WARN(!irq_is_nmi(scoped_irqdesc),
                         "prepare_percpu_nmi called for a non-NMI interrupt: irq %u\n", irq))
                        return -EINVAL;

                ret = irq_nmi_setup(scoped_irqdesc);
                if (ret)
                        pr_err("Failed to setup NMI delivery: irq %u\n", irq);
        }
        return ret;
}

/**
 * teardown_percpu_nmi - undoes NMI setup of IRQ line
 * @irq: Interrupt line from which CPU local NMI configuration should be removed
 *
 * This call undoes the setup done by prepare_percpu_nmi().
 *
 * IRQ line should not be enabled for the current CPU.
 * As a CPU local operation, this should be called from non-preemptible
 * context.
 */
void teardown_percpu_nmi(unsigned int irq)
{
        WARN_ON(preemptible());

        scoped_irqdesc_get_and_lock(irq, IRQ_GET_DESC_CHECK_PERCPU) {
                if (WARN_ON(!irq_is_nmi(scoped_irqdesc)))
                        return;
                irq_nmi_teardown(scoped_irqdesc);
        }
}

static int __irq_get_irqchip_state(struct irq_data *data, enum irqchip_irq_state which, bool *state)
{
        struct irq_chip *chip;
        int err = -EINVAL;

        do {
                chip = irq_data_get_irq_chip(data);
                if (WARN_ON_ONCE(!chip))
                        return -ENODEV;
                if (chip->irq_get_irqchip_state)
                        break;
#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
                data = data->parent_data;
#else
                data = NULL;
#endif
        } while (data);

        if (data)
                err = chip->irq_get_irqchip_state(data, which, state);
        return err;
}

/**
 * irq_get_irqchip_state - returns the irqchip state of a interrupt.
 * @irq:        Interrupt line that is forwarded to a VM
 * @which:      One of IRQCHIP_STATE_* the caller wants to know about
 * @state:      a pointer to a boolean where the state is to be stored
 *
 * This call snapshots the internal irqchip state of an interrupt,
 * returning into @state the bit corresponding to stage @which
 *
 * This function should be called with preemption disabled if the interrupt
 * controller has per-cpu registers.
 */
int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which, bool *state)
{
        scoped_irqdesc_get_and_buslock(irq, 0) {
                struct irq_data *data = irq_desc_get_irq_data(scoped_irqdesc);

                return __irq_get_irqchip_state(data, which, state);
        }
        return -EINVAL;
}
EXPORT_SYMBOL_GPL(irq_get_irqchip_state);

/**
 * irq_set_irqchip_state - set the state of a forwarded interrupt.
 * @irq:        Interrupt line that is forwarded to a VM
 * @which:      State to be restored (one of IRQCHIP_STATE_*)
 * @val:        Value corresponding to @which
 *
 * This call sets the internal irqchip state of an interrupt, depending on
 * the value of @which.
 *
 * This function should be called with migration disabled if the interrupt
 * controller has per-cpu registers.
 */
int irq_set_irqchip_state(unsigned int irq, enum irqchip_irq_state which, bool val)
{
        scoped_irqdesc_get_and_buslock(irq, 0) {
                struct irq_data *data = irq_desc_get_irq_data(scoped_irqdesc);
                struct irq_chip *chip;

                do {
                        chip = irq_data_get_irq_chip(data);

                        if (WARN_ON_ONCE(!chip))
                                return -ENODEV;

                        if (chip->irq_set_irqchip_state)
                                break;

                        data = irqd_get_parent_data(data);
                } while (data);

                if (data)
                        return chip->irq_set_irqchip_state(data, which, val);
        }
        return -EINVAL;
}
EXPORT_SYMBOL_GPL(irq_set_irqchip_state);

/**
 * irq_has_action - Check whether an interrupt is requested
 * @irq:        The linux irq number
 *
 * Returns: A snapshot of the current state
 */
bool irq_has_action(unsigned int irq)
{
        bool res;

        rcu_read_lock();
        res = irq_desc_has_action(irq_to_desc(irq));
        rcu_read_unlock();
        return res;
}
EXPORT_SYMBOL_GPL(irq_has_action);

/**
 * irq_check_status_bit - Check whether bits in the irq descriptor status are set
 * @irq:        The linux irq number
 * @bitmask:    The bitmask to evaluate
 *
 * Returns: True if one of the bits in @bitmask is set
 */
bool irq_check_status_bit(unsigned int irq, unsigned int bitmask)
{
        struct irq_desc *desc;
        bool res = false;

        rcu_read_lock();
        desc = irq_to_desc(irq);
        if (desc)
                res = !!(desc->status_use_accessors & bitmask);
        rcu_read_unlock();
        return res;
}
EXPORT_SYMBOL_GPL(irq_check_status_bit);