// SPDX-License-Identifier: GPL-2.0-only
/*
 * omap_hwmod implementation for OMAP2/3/4
 *
 * Copyright (C) 2009-2011 Nokia Corporation
 * Copyright (C) 2011-2012 Texas Instruments, Inc.
 *
 * Paul Walmsley, Benoît Cousson, Kevin Hilman
 *
 * Created in collaboration with (alphabetical order): Thara Gopinath,
 * Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari Poussa, Anand
 * Sawant, Santosh Shilimkar, Richard Woodruff
 *
 * Introduction
 * ------------
 * One way to view an OMAP SoC is as a collection of largely unrelated
 * IP blocks connected by interconnects.  The IP blocks include
 * devices such as ARM processors, audio serial interfaces, UARTs,
 * etc.  Some of these devices, like the DSP, are created by TI;
 * others, like the SGX, largely originate from external vendors.  In
 * TI's documentation, on-chip devices are referred to as "OMAP
 * modules."  Some of these IP blocks are identical across several
 * OMAP versions.  Others are revised frequently.
 *
 * These OMAP modules are tied together by various interconnects.
 * Most of the address and data flow between modules is via OCP-based
 * interconnects such as the L3 and L4 buses; but there are other
 * interconnects that distribute the hardware clock tree, handle idle
 * and reset signaling, supply power, and connect the modules to
 * various pads or balls on the OMAP package.
 *
 * OMAP hwmod provides a consistent way to describe the on-chip
 * hardware blocks and their integration into the rest of the chip.
 * This description can be automatically generated from the TI
 * hardware database.  OMAP hwmod provides a standard, consistent API
 * to reset, enable, idle, and disable these hardware blocks.  And
 * hwmod provides a way for other core code, such as the Linux device
 * code or the OMAP power management and address space mapping code,
 * to query the hardware database.
 *
 * Using hwmod
 * -----------
 * Drivers won't call hwmod functions directly.  That is done by the
 * omap_device code, and in rare occasions, by custom integration code
 * in arch/arm/ *omap*.  The omap_device code includes functions to
 * build a struct platform_device using omap_hwmod data, and that is
 * currently how hwmod data is communicated to drivers and to the
 * Linux driver model.  Most drivers will call omap_hwmod functions only
 * indirectly, via pm_runtime*() functions.
 *
 * From a layering perspective, here is where the OMAP hwmod code
 * fits into the kernel software stack:
 *
 *            +-------------------------------+
 *            |      Device driver code       |
 *            |      (e.g., drivers/)         |
 *            +-------------------------------+
 *            |      Linux driver model       |
 *            |     (platform_device /        |
 *            |  platform_driver data/code)   |
 *            +-------------------------------+
 *            | OMAP core-driver integration  |
 *            |(arch/arm/mach-omap2/devices.c)|
 *            +-------------------------------+
 *            |      omap_device code         |
 *            | (../plat-omap/omap_device.c)  |
 *            +-------------------------------+
 *   ---->    |    omap_hwmod code/data       |    <-----
 *            | (../mach-omap2/omap_hwmod*)   |
 *            +-------------------------------+
 *            | OMAP clock/PRCM/register fns  |
 *            | ({read,write}l_relaxed, clk*) |
 *            +-------------------------------+
 *
 * Device drivers should not contain any OMAP-specific code or data in
 * them.  They should only contain code to operate the IP block that
 * the driver is responsible for.  This is because these IP blocks can
 * also appear in other SoCs, either from TI (such as DaVinci) or from
 * other manufacturers; and drivers should be reusable across other
 * platforms.
 *
 * The OMAP hwmod code also will attempt to reset and idle all on-chip
 * devices upon boot.  The goal here is for the kernel to be
 * completely self-reliant and independent from bootloaders.  This is
 * to ensure a repeatable configuration, both to ensure consistent
 * runtime behavior, and to make it easier for others to reproduce
 * bugs.
 *
 * OMAP module activity states
 * ---------------------------
 * The hwmod code considers modules to be in one of several activity
 * states.  IP blocks start out in an UNKNOWN state, then once they
 * are registered via the hwmod code, proceed to the REGISTERED state.
 * Once their clock names are resolved to clock pointers, the module
 * enters the CLKS_INITED state; and finally, once the module has been
 * reset and the integration registers programmed, the INITIALIZED state
 * is entered.  The hwmod code will then place the module into either
 * the IDLE state to save power, or in the case of a critical system
 * module, the ENABLED state.
 *
 * OMAP core integration code can then call omap_hwmod*() functions
 * directly to move the module between the IDLE, ENABLED, and DISABLED
 * states, as needed.  This is done during both the PM idle loop, and
 * in the OMAP core integration code's implementation of the PM runtime
 * functions.
 *
 * References
 * ----------
 * This is a partial list.
 * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064)
 * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090)
 * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108)
 * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140)
 * - Open Core Protocol Specification 2.2
 *
 * To do:
 * - handle IO mapping
 * - bus throughput & module latency measurement code
 *
 * XXX add tests at the beginning of each function to ensure the hwmod is
 * in the appropriate state
 * XXX error return values should be checked to ensure that they are
 * appropriate
 */
#undef DEBUG

#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/list.h>
#include <linux/mutex.h>
#include <linux/spinlock.h>
#include <linux/slab.h>
#include <linux/cpu.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/memblock.h>

#include <linux/platform_data/ti-sysc.h>

#include <dt-bindings/bus/ti-sysc.h>

#include <asm/system_misc.h>

#include "clock.h"
#include "omap_hwmod.h"

#include "soc.h"
#include "common.h"
#include "clockdomain.h"
#include "hdq1w.h"
#include "mmc.h"
#include "powerdomain.h"
#include "cm2xxx.h"
#include "cm3xxx.h"
#include "cm33xx.h"
#include "prm.h"
#include "prm3xxx.h"
#include "prm44xx.h"
#include "prm33xx.h"
#include "prminst44xx.h"
#include "pm.h"
#include "wd_timer.h"

/* Name of the OMAP hwmod for the MPU */
#define MPU_INITIATOR_NAME              "mpu"

/*
 * Number of struct omap_hwmod_link records per struct
 * omap_hwmod_ocp_if record (master->slave and slave->master)
 */
#define LINKS_PER_OCP_IF                2

/*
 * Address offset (in bytes) between the reset control and the reset
 * status registers: 4 bytes on OMAP4
 */
#define OMAP4_RST_CTRL_ST_OFFSET        4

/*
 * Maximum length for module clock handle names
 */
#define MOD_CLK_MAX_NAME_LEN            32

/**
 * struct clkctrl_provider - clkctrl provider mapping data
 * @num_addrs: number of base address ranges for the provider
 * @addr: base address(es) for the provider
 * @size: size(s) of the provider address space(s)
 * @node: device node associated with the provider
 * @link: list link
 */
struct clkctrl_provider {
        int                     num_addrs;
        u32                     *addr;
        u32                     *size;
        struct device_node      *node;
        struct list_head        link;
};

static LIST_HEAD(clkctrl_providers);

/**
 * struct omap_hwmod_reset - IP specific reset functions
 * @match: string to match against the module name
 * @len: number of characters to match
 * @reset: IP specific reset function
 *
 * Used only in cases where struct omap_hwmod is dynamically allocated.
 */
struct omap_hwmod_reset {
        const char *match;
        int len;
        int (*reset)(struct omap_hwmod *oh);
};

/**
 * struct omap_hwmod_soc_ops - fn ptrs for some SoC-specific operations
 * @enable_module: function to enable a module (via MODULEMODE)
 * @disable_module: function to disable a module (via MODULEMODE)
 *
 * XXX Eventually this functionality will be hidden inside the PRM/CM
 * device drivers.  Until then, this should avoid huge blocks of cpu_is_*()
 * conditionals in this code.
 */
struct omap_hwmod_soc_ops {
        void (*enable_module)(struct omap_hwmod *oh);
        int (*disable_module)(struct omap_hwmod *oh);
        int (*wait_target_ready)(struct omap_hwmod *oh);
        int (*assert_hardreset)(struct omap_hwmod *oh,
                                struct omap_hwmod_rst_info *ohri);
        int (*deassert_hardreset)(struct omap_hwmod *oh,
                                  struct omap_hwmod_rst_info *ohri);
        int (*is_hardreset_asserted)(struct omap_hwmod *oh,
                                     struct omap_hwmod_rst_info *ohri);
        int (*init_clkdm)(struct omap_hwmod *oh);
        void (*update_context_lost)(struct omap_hwmod *oh);
        int (*get_context_lost)(struct omap_hwmod *oh);
        int (*disable_direct_prcm)(struct omap_hwmod *oh);
        u32 (*xlate_clkctrl)(struct omap_hwmod *oh);
};

/* soc_ops: adapts the omap_hwmod code to the currently-booted SoC */
static struct omap_hwmod_soc_ops soc_ops;

/* omap_hwmod_list contains all registered struct omap_hwmods */
static LIST_HEAD(omap_hwmod_list);
static DEFINE_MUTEX(list_lock);

/* mpu_oh: used to add/remove MPU initiator from sleepdep list */
static struct omap_hwmod *mpu_oh;

/* inited: set to true once the hwmod code is initialized */
static bool inited;

/* Private functions */

/**
 * _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy
 * @oh: struct omap_hwmod *
 *
 * Load the current value of the hwmod OCP_SYSCONFIG register into the
 * struct omap_hwmod for later use.  Returns -EINVAL if the hwmod has no
 * OCP_SYSCONFIG register or 0 upon success.
 */
static int _update_sysc_cache(struct omap_hwmod *oh)
{
        if (!oh->class->sysc) {
                WARN(1, "omap_hwmod: %s: cannot read OCP_SYSCONFIG: not defined on hwmod's class\n", oh->name);
                return -EINVAL;
        }

        /* XXX ensure module interface clock is up */

        oh->_sysc_cache = omap_hwmod_read(oh, oh->class->sysc->sysc_offs);

        if (!(oh->class->sysc->sysc_flags & SYSC_NO_CACHE))
                oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED;

        return 0;
}

/**
 * _write_sysconfig - write a value to the module's OCP_SYSCONFIG register
 * @v: OCP_SYSCONFIG value to write
 * @oh: struct omap_hwmod *
 *
 * Write @v into the module class' OCP_SYSCONFIG register, if it has
 * one.  No return value.
 */
static void _write_sysconfig(u32 v, struct omap_hwmod *oh)
{
        if (!oh->class->sysc) {
                WARN(1, "omap_hwmod: %s: cannot write OCP_SYSCONFIG: not defined on hwmod's class\n", oh->name);
                return;
        }

        /* XXX ensure module interface clock is up */

        /* Module might have lost context, always update cache and register */
        oh->_sysc_cache = v;

        /*
         * Some IP blocks (such as RTC) require unlocking of IP before
         * accessing its registers. If a function pointer is present
         * to unlock, then call it before accessing sysconfig and
         * call lock after writing sysconfig.
         */
        if (oh->class->unlock)
                oh->class->unlock(oh);

        omap_hwmod_write(v, oh, oh->class->sysc->sysc_offs);

        if (oh->class->lock)
                oh->class->lock(oh);
}

/**
 * _set_master_standbymode: set the OCP_SYSCONFIG MIDLEMODE field in @v
 * @oh: struct omap_hwmod *
 * @standbymode: MIDLEMODE field bits
 * @v: pointer to register contents to modify
 *
 * Update the master standby mode bits in @v to be @standbymode for
 * the @oh hwmod.  Does not write to the hardware.  Returns -EINVAL
 * upon error or 0 upon success.
 */
static int _set_master_standbymode(struct omap_hwmod *oh, u8 standbymode,
                                   u32 *v)
{
        u32 mstandby_mask;
        u8 mstandby_shift;

        if (!oh->class->sysc ||
            !(oh->class->sysc->sysc_flags & SYSC_HAS_MIDLEMODE))
                return -EINVAL;

        if (!oh->class->sysc->sysc_fields) {
                WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
                return -EINVAL;
        }

        mstandby_shift = oh->class->sysc->sysc_fields->midle_shift;
        mstandby_mask = (0x3 << mstandby_shift);

        *v &= ~mstandby_mask;
        *v |= __ffs(standbymode) << mstandby_shift;

        return 0;
}

/**
 * _set_slave_idlemode: set the OCP_SYSCONFIG SIDLEMODE field in @v
 * @oh: struct omap_hwmod *
 * @idlemode: SIDLEMODE field bits
 * @v: pointer to register contents to modify
 *
 * Update the slave idle mode bits in @v to be @idlemode for the @oh
 * hwmod.  Does not write to the hardware.  Returns -EINVAL upon error
 * or 0 upon success.
 */
static int _set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode, u32 *v)
{
        u32 sidle_mask;
        u8 sidle_shift;

        if (!oh->class->sysc ||
            !(oh->class->sysc->sysc_flags & SYSC_HAS_SIDLEMODE))
                return -EINVAL;

        if (!oh->class->sysc->sysc_fields) {
                WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
                return -EINVAL;
        }

        sidle_shift = oh->class->sysc->sysc_fields->sidle_shift;
        sidle_mask = (0x3 << sidle_shift);

        *v &= ~sidle_mask;
        *v |= __ffs(idlemode) << sidle_shift;

        return 0;
}

/**
 * _set_clockactivity: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v
 * @oh: struct omap_hwmod *
 * @clockact: CLOCKACTIVITY field bits
 * @v: pointer to register contents to modify
 *
 * Update the clockactivity mode bits in @v to be @clockact for the
 * @oh hwmod.  Used for additional powersaving on some modules.  Does
 * not write to the hardware.  Returns -EINVAL upon error or 0 upon
 * success.
 */
static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v)
{
        u32 clkact_mask;
        u8  clkact_shift;

        if (!oh->class->sysc ||
            !(oh->class->sysc->sysc_flags & SYSC_HAS_CLOCKACTIVITY))
                return -EINVAL;

        if (!oh->class->sysc->sysc_fields) {
                WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
                return -EINVAL;
        }

        clkact_shift = oh->class->sysc->sysc_fields->clkact_shift;
        clkact_mask = (0x3 << clkact_shift);

        *v &= ~clkact_mask;
        *v |= clockact << clkact_shift;

        return 0;
}

/**
 * _set_softreset: set OCP_SYSCONFIG.SOFTRESET bit in @v
 * @oh: struct omap_hwmod *
 * @v: pointer to register contents to modify
 *
 * Set the SOFTRESET bit in @v for hwmod @oh.  Returns -EINVAL upon
 * error or 0 upon success.
 */
static int _set_softreset(struct omap_hwmod *oh, u32 *v)
{
        u32 softrst_mask;

        if (!oh->class->sysc ||
            !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
                return -EINVAL;

        if (!oh->class->sysc->sysc_fields) {
                WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
                return -EINVAL;
        }

        softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);

        *v |= softrst_mask;

        return 0;
}

/**
 * _clear_softreset: clear OCP_SYSCONFIG.SOFTRESET bit in @v
 * @oh: struct omap_hwmod *
 * @v: pointer to register contents to modify
 *
 * Clear the SOFTRESET bit in @v for hwmod @oh.  Returns -EINVAL upon
 * error or 0 upon success.
 */
static int _clear_softreset(struct omap_hwmod *oh, u32 *v)
{
        u32 softrst_mask;

        if (!oh->class->sysc ||
            !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
                return -EINVAL;

        if (!oh->class->sysc->sysc_fields) {
                WARN(1,
                     "omap_hwmod: %s: sysc_fields absent for sysconfig class\n",
                     oh->name);
                return -EINVAL;
        }

        softrst_mask = (0x1 << oh->class->sysc->sysc_fields->srst_shift);

        *v &= ~softrst_mask;

        return 0;
}

/**
 * _wait_softreset_complete - wait for an OCP softreset to complete
 * @oh: struct omap_hwmod * to wait on
 *
 * Wait until the IP block represented by @oh reports that its OCP
 * softreset is complete.  This can be triggered by software (see
 * _ocp_softreset()) or by hardware upon returning from off-mode (one
 * example is HSMMC).  Waits for up to MAX_MODULE_SOFTRESET_WAIT
 * microseconds.  Returns the number of microseconds waited.
 */
static int _wait_softreset_complete(struct omap_hwmod *oh)
{
        struct omap_hwmod_class_sysconfig *sysc;
        u32 softrst_mask;
        int c = 0;

        sysc = oh->class->sysc;

        if (sysc->sysc_flags & SYSS_HAS_RESET_STATUS && sysc->syss_offs > 0)
                omap_test_timeout((omap_hwmod_read(oh, sysc->syss_offs)
                                   & SYSS_RESETDONE_MASK),
                                  MAX_MODULE_SOFTRESET_WAIT, c);
        else if (sysc->sysc_flags & SYSC_HAS_RESET_STATUS) {
                softrst_mask = (0x1 << sysc->sysc_fields->srst_shift);
                omap_test_timeout(!(omap_hwmod_read(oh, sysc->sysc_offs)
                                    & softrst_mask),
                                  MAX_MODULE_SOFTRESET_WAIT, c);
        }

        return c;
}

/**
 * _set_dmadisable: set OCP_SYSCONFIG.DMADISABLE bit in @v
 * @oh: struct omap_hwmod *
 *
 * The DMADISABLE bit is a semi-automatic bit present in sysconfig register
 * of some modules. When the DMA must perform read/write accesses, the
 * DMADISABLE bit is cleared by the hardware. But when the DMA must stop
 * for power management, software must set the DMADISABLE bit back to 1.
 *
 * Set the DMADISABLE bit in @v for hwmod @oh.  Returns -EINVAL upon
 * error or 0 upon success.
 */
static int _set_dmadisable(struct omap_hwmod *oh)
{
        u32 v;
        u32 dmadisable_mask;

        if (!oh->class->sysc ||
            !(oh->class->sysc->sysc_flags & SYSC_HAS_DMADISABLE))
                return -EINVAL;

        if (!oh->class->sysc->sysc_fields) {
                WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
                return -EINVAL;
        }

        /* clocks must be on for this operation */
        if (oh->_state != _HWMOD_STATE_ENABLED) {
                pr_warn("omap_hwmod: %s: dma can be disabled only from enabled state\n", oh->name);
                return -EINVAL;
        }

        pr_debug("omap_hwmod: %s: setting DMADISABLE\n", oh->name);

        v = oh->_sysc_cache;
        dmadisable_mask =
                (0x1 << oh->class->sysc->sysc_fields->dmadisable_shift);
        v |= dmadisable_mask;
        _write_sysconfig(v, oh);

        return 0;
}

/**
 * _set_module_autoidle: set the OCP_SYSCONFIG AUTOIDLE field in @v
 * @oh: struct omap_hwmod *
 * @autoidle: desired AUTOIDLE bitfield value (0 or 1)
 * @v: pointer to register contents to modify
 *
 * Update the module autoidle bit in @v to be @autoidle for the @oh
 * hwmod.  The autoidle bit controls whether the module can gate
 * internal clocks automatically when it isn't doing anything; the
 * exact function of this bit varies on a per-module basis.  This
 * function does not write to the hardware.  Returns -EINVAL upon
 * error or 0 upon success.
 */
static int _set_module_autoidle(struct omap_hwmod *oh, u8 autoidle,
                                u32 *v)
{
        u32 autoidle_mask;
        u8 autoidle_shift;

        if (!oh->class->sysc ||
            !(oh->class->sysc->sysc_flags & SYSC_HAS_AUTOIDLE))
                return -EINVAL;

        if (!oh->class->sysc->sysc_fields) {
                WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
                return -EINVAL;
        }

        autoidle_shift = oh->class->sysc->sysc_fields->autoidle_shift;
        autoidle_mask = (0x1 << autoidle_shift);

        *v &= ~autoidle_mask;
        *v |= autoidle << autoidle_shift;

        return 0;
}

/**
 * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware
 * @oh: struct omap_hwmod *
 *
 * Allow the hardware module @oh to send wakeups.  Returns -EINVAL
 * upon error or 0 upon success.
 */
static int _enable_wakeup(struct omap_hwmod *oh, u32 *v)
{
        if (!oh->class->sysc ||
            !((oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP) ||
              (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP) ||
              (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)))
                return -EINVAL;

        if (!oh->class->sysc->sysc_fields) {
                WARN(1, "omap_hwmod: %s: offset struct for sysconfig not provided in class\n", oh->name);
                return -EINVAL;
        }

        if (oh->class->sysc->sysc_flags & SYSC_HAS_ENAWAKEUP)
                *v |= 0x1 << oh->class->sysc->sysc_fields->enwkup_shift;

        if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
                _set_slave_idlemode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);
        if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
                _set_master_standbymode(oh, HWMOD_IDLEMODE_SMART_WKUP, v);

        /* XXX test pwrdm_get_wken for this hwmod's subsystem */

        return 0;
}

static struct clockdomain *_get_clkdm(struct omap_hwmod *oh)
{
        struct clk_hw_omap *clk;

        if (!oh)
                return NULL;

        if (oh->clkdm) {
                return oh->clkdm;
        } else if (oh->_clk) {
                if (!omap2_clk_is_hw_omap(__clk_get_hw(oh->_clk)))
                        return NULL;
                clk = to_clk_hw_omap(__clk_get_hw(oh->_clk));
                return clk->clkdm;
        }
        return NULL;
}

/**
 * _add_initiator_dep: prevent @oh from smart-idling while @init_oh is active
 * @oh: struct omap_hwmod *
 *
 * Prevent the hardware module @oh from entering idle while the
 * hardare module initiator @init_oh is active.  Useful when a module
 * will be accessed by a particular initiator (e.g., if a module will
 * be accessed by the IVA, there should be a sleepdep between the IVA
 * initiator and the module).  Only applies to modules in smart-idle
 * mode.  If the clockdomain is marked as not needing autodeps, return
 * 0 without doing anything.  Otherwise, returns -EINVAL upon error or
 * passes along clkdm_add_sleepdep() value upon success.
 */
static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
{
        struct clockdomain *clkdm, *init_clkdm;

        clkdm = _get_clkdm(oh);
        init_clkdm = _get_clkdm(init_oh);

        if (!clkdm || !init_clkdm)
                return -EINVAL;

        if (clkdm && clkdm->flags & CLKDM_NO_AUTODEPS)
                return 0;

        return clkdm_add_sleepdep(clkdm, init_clkdm);
}

/**
 * _del_initiator_dep: allow @oh to smart-idle even if @init_oh is active
 * @oh: struct omap_hwmod *
 *
 * Allow the hardware module @oh to enter idle while the hardare
 * module initiator @init_oh is active.  Useful when a module will not
 * be accessed by a particular initiator (e.g., if a module will not
 * be accessed by the IVA, there should be no sleepdep between the IVA
 * initiator and the module).  Only applies to modules in smart-idle
 * mode.  If the clockdomain is marked as not needing autodeps, return
 * 0 without doing anything.  Returns -EINVAL upon error or passes
 * along clkdm_del_sleepdep() value upon success.
 */
static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh)
{
        struct clockdomain *clkdm, *init_clkdm;

        clkdm = _get_clkdm(oh);
        init_clkdm = _get_clkdm(init_oh);

        if (!clkdm || !init_clkdm)
                return -EINVAL;

        if (clkdm && clkdm->flags & CLKDM_NO_AUTODEPS)
                return 0;

        return clkdm_del_sleepdep(clkdm, init_clkdm);
}

static const struct of_device_id ti_clkctrl_match_table[] __initconst = {
        { .compatible = "ti,clkctrl" },
        { }
};

static int __init _setup_clkctrl_provider(struct device_node *np)
{
        struct clkctrl_provider *provider;
        int i;

        provider = memblock_alloc(sizeof(*provider), SMP_CACHE_BYTES);
        if (!provider)
                return -ENOMEM;

        provider->node = np;

        provider->num_addrs = of_address_count(np);

        provider->addr =
                memblock_alloc(sizeof(void *) * provider->num_addrs,
                               SMP_CACHE_BYTES);
        if (!provider->addr)
                return -ENOMEM;

        provider->size =
                memblock_alloc(sizeof(u32) * provider->num_addrs,
                               SMP_CACHE_BYTES);
        if (!provider->size)
                return -ENOMEM;

        for (i = 0; i < provider->num_addrs; i++) {
                struct resource res;
                of_address_to_resource(np, i, &res);
                provider->addr[i] = res.start;
                provider->size[i] = resource_size(&res);
                pr_debug("%s: %pOF: %pR\n", __func__, np, &res);
        }

        list_add(&provider->link, &clkctrl_providers);

        return 0;
}

static int __init _init_clkctrl_providers(void)
{
        struct device_node *np;
        int ret = 0;

        for_each_matching_node(np, ti_clkctrl_match_table) {
                ret = _setup_clkctrl_provider(np);
                if (ret) {
                        of_node_put(np);
                        break;
                }
        }

        return ret;
}

static u32 _omap4_xlate_clkctrl(struct omap_hwmod *oh)
{
        if (!oh->prcm.omap4.modulemode)
                return 0;

        return omap_cm_xlate_clkctrl(oh->clkdm->prcm_partition,
                                     oh->clkdm->cm_inst,
                                     oh->prcm.omap4.clkctrl_offs);
}

static struct clk *_lookup_clkctrl_clk(struct omap_hwmod *oh)
{
        struct clkctrl_provider *provider;
        struct clk *clk;
        u32 addr;

        if (!soc_ops.xlate_clkctrl)
                return NULL;

        addr = soc_ops.xlate_clkctrl(oh);
        if (!addr)
                return NULL;

        pr_debug("%s: %s: addr=%x\n", __func__, oh->name, addr);

        list_for_each_entry(provider, &clkctrl_providers, link) {
                int i;

                for (i = 0; i < provider->num_addrs; i++) {
                        if (provider->addr[i] <= addr &&
                            provider->addr[i] + provider->size[i] > addr) {
                                struct of_phandle_args clkspec;

                                clkspec.np = provider->node;
                                clkspec.args_count = 2;
                                clkspec.args[0] = addr - provider->addr[0];
                                clkspec.args[1] = 0;

                                clk = of_clk_get_from_provider(&clkspec);

                                pr_debug("%s: %s got %p (offset=%x, provider=%pOF)\n",
                                         __func__, oh->name, clk,
                                         clkspec.args[0], provider->node);

                                return clk;
                        }
                }
        }

        return NULL;
}

/**
 * _init_main_clk - get a struct clk * for the hwmod's main functional clk
 * @oh: struct omap_hwmod *
 *
 * Called from _init_clocks().  Populates the @oh _clk (main
 * functional clock pointer) if a clock matching the hwmod name is found,
 * or a main_clk is present.  Returns 0 on success or -EINVAL on error.
 */
static int _init_main_clk(struct omap_hwmod *oh)
{
        int ret = 0;
        struct clk *clk = NULL;

        clk = _lookup_clkctrl_clk(oh);

        if (!IS_ERR_OR_NULL(clk)) {
                pr_debug("%s: mapped main_clk %s for %s\n", __func__,
                         __clk_get_name(clk), oh->name);
                oh->main_clk = __clk_get_name(clk);
                oh->_clk = clk;
                soc_ops.disable_direct_prcm(oh);
        } else {
                if (!oh->main_clk)
                        return 0;

                oh->_clk = clk_get(NULL, oh->main_clk);
        }

        if (IS_ERR(oh->_clk)) {
                pr_warn("omap_hwmod: %s: cannot clk_get main_clk %s\n",
                        oh->name, oh->main_clk);
                return -EINVAL;
        }
        /*
         * HACK: This needs a re-visit once clk_prepare() is implemented
         * to do something meaningful. Today its just a no-op.
         * If clk_prepare() is used at some point to do things like
         * voltage scaling etc, then this would have to be moved to
         * some point where subsystems like i2c and pmic become
         * available.
         */
        clk_prepare(oh->_clk);

        if (!_get_clkdm(oh))
                pr_debug("omap_hwmod: %s: missing clockdomain for %s.\n",
                           oh->name, oh->main_clk);

        return ret;
}

/**
 * _init_interface_clks - get a struct clk * for the hwmod's interface clks
 * @oh: struct omap_hwmod *
 *
 * Called from _init_clocks().  Populates the @oh OCP slave interface
 * clock pointers.  Returns 0 on success or -EINVAL on error.
 */
static int _init_interface_clks(struct omap_hwmod *oh)
{
        struct omap_hwmod_ocp_if *os;
        struct clk *c;
        int ret = 0;

        list_for_each_entry(os, &oh->slave_ports, node) {
                if (!os->clk)
                        continue;

                c = clk_get(NULL, os->clk);
                if (IS_ERR(c)) {
                        pr_warn("omap_hwmod: %s: cannot clk_get interface_clk %s\n",
                                oh->name, os->clk);
                        ret = -EINVAL;
                        continue;
                }
                os->_clk = c;
                /*
                 * HACK: This needs a re-visit once clk_prepare() is implemented
                 * to do something meaningful. Today its just a no-op.
                 * If clk_prepare() is used at some point to do things like
                 * voltage scaling etc, then this would have to be moved to
                 * some point where subsystems like i2c and pmic become
                 * available.
                 */
                clk_prepare(os->_clk);
        }

        return ret;
}

/**
 * _init_opt_clks - get a struct clk * for the hwmod's optional clocks
 * @oh: struct omap_hwmod *
 *
 * Called from _init_clocks().  Populates the @oh omap_hwmod_opt_clk
 * clock pointers.  Returns 0 on success or -EINVAL on error.
 */
static int _init_opt_clks(struct omap_hwmod *oh)
{
        struct omap_hwmod_opt_clk *oc;
        struct clk *c;
        int i;
        int ret = 0;

        for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) {
                c = clk_get(NULL, oc->clk);
                if (IS_ERR(c)) {
                        pr_warn("omap_hwmod: %s: cannot clk_get opt_clk %s\n",
                                oh->name, oc->clk);
                        ret = -EINVAL;
                        continue;
                }
                oc->_clk = c;
                /*
                 * HACK: This needs a re-visit once clk_prepare() is implemented
                 * to do something meaningful. Today its just a no-op.
                 * If clk_prepare() is used at some point to do things like
                 * voltage scaling etc, then this would have to be moved to
                 * some point where subsystems like i2c and pmic become
                 * available.
                 */
                clk_prepare(oc->_clk);
        }

        return ret;
}

static void _enable_optional_clocks(struct omap_hwmod *oh)
{
        struct omap_hwmod_opt_clk *oc;
        int i;

        pr_debug("omap_hwmod: %s: enabling optional clocks\n", oh->name);

        for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
                if (oc->_clk) {
                        pr_debug("omap_hwmod: enable %s:%s\n", oc->role,
                                 __clk_get_name(oc->_clk));
                        clk_enable(oc->_clk);
                }
}

static void _disable_optional_clocks(struct omap_hwmod *oh)
{
        struct omap_hwmod_opt_clk *oc;
        int i;

        pr_debug("omap_hwmod: %s: disabling optional clocks\n", oh->name);

        for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++)
                if (oc->_clk) {
                        pr_debug("omap_hwmod: disable %s:%s\n", oc->role,
                                 __clk_get_name(oc->_clk));
                        clk_disable(oc->_clk);
                }
}

/**
 * _enable_clocks - enable hwmod main clock and interface clocks
 * @oh: struct omap_hwmod *
 *
 * Enables all clocks necessary for register reads and writes to succeed
 * on the hwmod @oh.  Returns 0.
 */
static int _enable_clocks(struct omap_hwmod *oh)
{
        struct omap_hwmod_ocp_if *os;

        pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name);

        if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
                _enable_optional_clocks(oh);

        if (oh->_clk)
                clk_enable(oh->_clk);

        list_for_each_entry(os, &oh->slave_ports, node) {
                if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE)) {
                        omap2_clk_deny_idle(os->_clk);
                        clk_enable(os->_clk);
                }
        }

        /* The opt clocks are controlled by the device driver. */

        return 0;
}

/**
 * _omap4_clkctrl_managed_by_clkfwk - true if clkctrl managed by clock framework
 * @oh: struct omap_hwmod *
 */
static bool _omap4_clkctrl_managed_by_clkfwk(struct omap_hwmod *oh)
{
        if (oh->prcm.omap4.flags & HWMOD_OMAP4_CLKFWK_CLKCTR_CLOCK)
                return true;

        return false;
}

/**
 * _omap4_has_clkctrl_clock - returns true if a module has clkctrl clock
 * @oh: struct omap_hwmod *
 */
static bool _omap4_has_clkctrl_clock(struct omap_hwmod *oh)
{
        if (oh->prcm.omap4.clkctrl_offs)
                return true;

        if (!oh->prcm.omap4.clkctrl_offs &&
            oh->prcm.omap4.flags & HWMOD_OMAP4_ZERO_CLKCTRL_OFFSET)
                return true;

        return false;
}

/**
 * _disable_clocks - disable hwmod main clock and interface clocks
 * @oh: struct omap_hwmod *
 *
 * Disables the hwmod @oh main functional and interface clocks.  Returns 0.
 */
static int _disable_clocks(struct omap_hwmod *oh)
{
        struct omap_hwmod_ocp_if *os;

        pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name);

        if (oh->_clk)
                clk_disable(oh->_clk);

        list_for_each_entry(os, &oh->slave_ports, node) {
                if (os->_clk && (os->flags & OCPIF_SWSUP_IDLE)) {
                        clk_disable(os->_clk);
                        omap2_clk_allow_idle(os->_clk);
                }
        }

        if (oh->flags & HWMOD_OPT_CLKS_NEEDED)
                _disable_optional_clocks(oh);

        /* The opt clocks are controlled by the device driver. */

        return 0;
}

/**
 * _omap4_enable_module - enable CLKCTRL modulemode on OMAP4
 * @oh: struct omap_hwmod *
 *
 * Enables the PRCM module mode related to the hwmod @oh.
 * No return value.
 */
static void _omap4_enable_module(struct omap_hwmod *oh)
{
        if (!oh->clkdm || !oh->prcm.omap4.modulemode ||
            _omap4_clkctrl_managed_by_clkfwk(oh))
                return;

        pr_debug("omap_hwmod: %s: %s: %d\n",
                 oh->name, __func__, oh->prcm.omap4.modulemode);

        omap_cm_module_enable(oh->prcm.omap4.modulemode,
                              oh->clkdm->prcm_partition,
                              oh->clkdm->cm_inst, oh->prcm.omap4.clkctrl_offs);
}

/**
 * _omap4_wait_target_disable - wait for a module to be disabled on OMAP4
 * @oh: struct omap_hwmod *
 *
 * Wait for a module @oh to enter slave idle.  Returns 0 if the module
 * does not have an IDLEST bit or if the module successfully enters
 * slave idle; otherwise, pass along the return value of the
 * appropriate *_cm*_wait_module_idle() function.
 */
static int _omap4_wait_target_disable(struct omap_hwmod *oh)
{
        if (!oh)
                return -EINVAL;

        if (oh->_int_flags & _HWMOD_NO_MPU_PORT || !oh->clkdm)
                return 0;

        if (oh->flags & HWMOD_NO_IDLEST)
                return 0;

        if (_omap4_clkctrl_managed_by_clkfwk(oh))
                return 0;

        if (!_omap4_has_clkctrl_clock(oh))
                return 0;

        return omap_cm_wait_module_idle(oh->clkdm->prcm_partition,
                                        oh->clkdm->cm_inst,
                                        oh->prcm.omap4.clkctrl_offs, 0);
}

/**
 * _save_mpu_port_index - find and save the index to @oh's MPU port
 * @oh: struct omap_hwmod *
 *
 * Determines the array index of the OCP slave port that the MPU uses
 * to address the device, and saves it into the struct omap_hwmod.
 * Intended to be called during hwmod registration only. No return
 * value.
 */
static void __init _save_mpu_port_index(struct omap_hwmod *oh)
{
        struct omap_hwmod_ocp_if *os = NULL;

        if (!oh)
                return;

        oh->_int_flags |= _HWMOD_NO_MPU_PORT;

        list_for_each_entry(os, &oh->slave_ports, node) {
                if (os->user & OCP_USER_MPU) {
                        oh->_mpu_port = os;
                        oh->_int_flags &= ~_HWMOD_NO_MPU_PORT;
                        break;
                }
        }

        return;
}

/**
 * _find_mpu_rt_port - return omap_hwmod_ocp_if accessible by the MPU
 * @oh: struct omap_hwmod *
 *
 * Given a pointer to a struct omap_hwmod record @oh, return a pointer
 * to the struct omap_hwmod_ocp_if record that is used by the MPU to
 * communicate with the IP block.  This interface need not be directly
 * connected to the MPU (and almost certainly is not), but is directly
 * connected to the IP block represented by @oh.  Returns a pointer
 * to the struct omap_hwmod_ocp_if * upon success, or returns NULL upon
 * error or if there does not appear to be a path from the MPU to this
 * IP block.
 */
static struct omap_hwmod_ocp_if *_find_mpu_rt_port(struct omap_hwmod *oh)
{
        if (!oh || oh->_int_flags & _HWMOD_NO_MPU_PORT || oh->slaves_cnt == 0)
                return NULL;

        return oh->_mpu_port;
};

/**
 * _enable_sysc - try to bring a module out of idle via OCP_SYSCONFIG
 * @oh: struct omap_hwmod *
 *
 * Ensure that the OCP_SYSCONFIG register for the IP block represented
 * by @oh is set to indicate to the PRCM that the IP block is active.
 * Usually this means placing the module into smart-idle mode and
 * smart-standby, but if there is a bug in the automatic idle handling
 * for the IP block, it may need to be placed into the force-idle or
 * no-idle variants of these modes.  No return value.
 */
static void _enable_sysc(struct omap_hwmod *oh)
{
        u8 idlemode, sf;
        u32 v;
        bool clkdm_act;
        struct clockdomain *clkdm;

        if (!oh->class->sysc)
                return;

        /*
         * Wait until reset has completed, this is needed as the IP
         * block is reset automatically by hardware in some cases
         * (off-mode for example), and the drivers require the
         * IP to be ready when they access it
         */
        if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
                _enable_optional_clocks(oh);
        _wait_softreset_complete(oh);
        if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
                _disable_optional_clocks(oh);

        v = oh->_sysc_cache;
        sf = oh->class->sysc->sysc_flags;

        clkdm = _get_clkdm(oh);
        if (sf & SYSC_HAS_SIDLEMODE) {
                if (oh->flags & HWMOD_SWSUP_SIDLE ||
                    oh->flags & HWMOD_SWSUP_SIDLE_ACT) {
                        idlemode = HWMOD_IDLEMODE_NO;
                } else {
                        if (sf & SYSC_HAS_ENAWAKEUP)
                                _enable_wakeup(oh, &v);
                        if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
                                idlemode = HWMOD_IDLEMODE_SMART_WKUP;
                        else
                                idlemode = HWMOD_IDLEMODE_SMART;
                }

                /*
                 * This is special handling for some IPs like
                 * 32k sync timer. Force them to idle!
                 */
                clkdm_act = (clkdm && clkdm->flags & CLKDM_ACTIVE_WITH_MPU);
                if (clkdm_act && !(oh->class->sysc->idlemodes &
                                   (SIDLE_SMART | SIDLE_SMART_WKUP)))
                        idlemode = HWMOD_IDLEMODE_FORCE;

                _set_slave_idlemode(oh, idlemode, &v);
        }

        if (sf & SYSC_HAS_MIDLEMODE) {
                if (oh->flags & HWMOD_FORCE_MSTANDBY) {
                        idlemode = HWMOD_IDLEMODE_FORCE;
                } else if (oh->flags & HWMOD_SWSUP_MSTANDBY) {
                        idlemode = HWMOD_IDLEMODE_NO;
                } else {
                        if (sf & SYSC_HAS_ENAWAKEUP)
                                _enable_wakeup(oh, &v);
                        if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
                                idlemode = HWMOD_IDLEMODE_SMART_WKUP;
                        else
                                idlemode = HWMOD_IDLEMODE_SMART;
                }
                _set_master_standbymode(oh, idlemode, &v);
        }

        /*
         * XXX The clock framework should handle this, by
         * calling into this code.  But this must wait until the
         * clock structures are tagged with omap_hwmod entries
         */
        if ((oh->flags & HWMOD_SET_DEFAULT_CLOCKACT) &&
            (sf & SYSC_HAS_CLOCKACTIVITY))
                _set_clockactivity(oh, CLOCKACT_TEST_ICLK, &v);

        _write_sysconfig(v, oh);

        /*
         * Set the autoidle bit only after setting the smartidle bit
         * Setting this will not have any impact on the other modules.
         */
        if (sf & SYSC_HAS_AUTOIDLE) {
                idlemode = (oh->flags & HWMOD_NO_OCP_AUTOIDLE) ?
                        0 : 1;
                _set_module_autoidle(oh, idlemode, &v);
                _write_sysconfig(v, oh);
        }
}

/**
 * _idle_sysc - try to put a module into idle via OCP_SYSCONFIG
 * @oh: struct omap_hwmod *
 *
 * If module is marked as SWSUP_SIDLE, force the module into slave
 * idle; otherwise, configure it for smart-idle.  If module is marked
 * as SWSUP_MSUSPEND, force the module into master standby; otherwise,
 * configure it for smart-standby.  No return value.
 */
static void _idle_sysc(struct omap_hwmod *oh)
{
        u8 idlemode, sf;
        u32 v;

        if (!oh->class->sysc)
                return;

        v = oh->_sysc_cache;
        sf = oh->class->sysc->sysc_flags;

        if (sf & SYSC_HAS_SIDLEMODE) {
                if (oh->flags & HWMOD_SWSUP_SIDLE) {
                        idlemode = HWMOD_IDLEMODE_FORCE;
                } else {
                        if (sf & SYSC_HAS_ENAWAKEUP)
                                _enable_wakeup(oh, &v);
                        if (oh->class->sysc->idlemodes & SIDLE_SMART_WKUP)
                                idlemode = HWMOD_IDLEMODE_SMART_WKUP;
                        else
                                idlemode = HWMOD_IDLEMODE_SMART;
                }
                _set_slave_idlemode(oh, idlemode, &v);
        }

        if (sf & SYSC_HAS_MIDLEMODE) {
                if ((oh->flags & HWMOD_SWSUP_MSTANDBY) ||
                    (oh->flags & HWMOD_FORCE_MSTANDBY)) {
                        idlemode = HWMOD_IDLEMODE_FORCE;
                } else {
                        if (sf & SYSC_HAS_ENAWAKEUP)
                                _enable_wakeup(oh, &v);
                        if (oh->class->sysc->idlemodes & MSTANDBY_SMART_WKUP)
                                idlemode = HWMOD_IDLEMODE_SMART_WKUP;
                        else
                                idlemode = HWMOD_IDLEMODE_SMART;
                }
                _set_master_standbymode(oh, idlemode, &v);
        }

        /* If the cached value is the same as the new value, skip the write */
        if (oh->_sysc_cache != v)
                _write_sysconfig(v, oh);
}

/**
 * _shutdown_sysc - force a module into idle via OCP_SYSCONFIG
 * @oh: struct omap_hwmod *
 *
 * Force the module into slave idle and master suspend. No return
 * value.
 */
static void _shutdown_sysc(struct omap_hwmod *oh)
{
        u32 v;
        u8 sf;

        if (!oh->class->sysc)
                return;

        v = oh->_sysc_cache;
        sf = oh->class->sysc->sysc_flags;

        if (sf & SYSC_HAS_SIDLEMODE)
                _set_slave_idlemode(oh, HWMOD_IDLEMODE_FORCE, &v);

        if (sf & SYSC_HAS_MIDLEMODE)
                _set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v);

        if (sf & SYSC_HAS_AUTOIDLE)
                _set_module_autoidle(oh, 1, &v);

        _write_sysconfig(v, oh);
}

/**
 * _lookup - find an omap_hwmod by name
 * @name: find an omap_hwmod by name
 *
 * Return a pointer to an omap_hwmod by name, or NULL if not found.
 */
static struct omap_hwmod *_lookup(const char *name)
{
        struct omap_hwmod *oh, *temp_oh;

        oh = NULL;

        list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
                if (!strcmp(name, temp_oh->name)) {
                        oh = temp_oh;
                        break;
                }
        }

        return oh;
}

/**
 * _init_clkdm - look up a clockdomain name, store pointer in omap_hwmod
 * @oh: struct omap_hwmod *
 *
 * Convert a clockdomain name stored in a struct omap_hwmod into a
 * clockdomain pointer, and save it into the struct omap_hwmod.
 * Return -EINVAL if the clkdm_name lookup failed.
 */
static int _init_clkdm(struct omap_hwmod *oh)
{
        if (!oh->clkdm_name) {
                pr_debug("omap_hwmod: %s: missing clockdomain\n", oh->name);
                return 0;
        }

        oh->clkdm = clkdm_lookup(oh->clkdm_name);
        if (!oh->clkdm) {
                pr_warn("omap_hwmod: %s: could not associate to clkdm %s\n",
                        oh->name, oh->clkdm_name);
                return 0;
        }

        pr_debug("omap_hwmod: %s: associated to clkdm %s\n",
                oh->name, oh->clkdm_name);

        return 0;
}

/**
 * _init_clocks - clk_get() all clocks associated with this hwmod. Retrieve as
 * well the clockdomain.
 * @oh: struct omap_hwmod *
 * @np: device_node mapped to this hwmod
 *
 * Called by omap_hwmod_setup_*() (after omap2_clk_init()).
 * Resolves all clock names embedded in the hwmod.  Returns 0 on
 * success, or a negative error code on failure.
 */
static int _init_clocks(struct omap_hwmod *oh, struct device_node *np)
{
        int ret = 0;

        if (oh->_state != _HWMOD_STATE_REGISTERED)
                return 0;

        pr_debug("omap_hwmod: %s: looking up clocks\n", oh->name);

        if (soc_ops.init_clkdm)
                ret |= soc_ops.init_clkdm(oh);

        ret |= _init_main_clk(oh);
        ret |= _init_interface_clks(oh);
        ret |= _init_opt_clks(oh);

        if (!ret)
                oh->_state = _HWMOD_STATE_CLKS_INITED;
        else
                pr_warn("omap_hwmod: %s: cannot _init_clocks\n", oh->name);

        return ret;
}

/**
 * _lookup_hardreset - fill register bit info for this hwmod/reset line
 * @oh: struct omap_hwmod *
 * @name: name of the reset line in the context of this hwmod
 * @ohri: struct omap_hwmod_rst_info * that this function will fill in
 *
 * Return the bit position of the reset line that match the
 * input name. Return -ENOENT if not found.
 */
static int _lookup_hardreset(struct omap_hwmod *oh, const char *name,
                             struct omap_hwmod_rst_info *ohri)
{
        int i;

        for (i = 0; i < oh->rst_lines_cnt; i++) {
                const char *rst_line = oh->rst_lines[i].name;
                if (!strcmp(rst_line, name)) {
                        ohri->rst_shift = oh->rst_lines[i].rst_shift;
                        ohri->st_shift = oh->rst_lines[i].st_shift;
                        pr_debug("omap_hwmod: %s: %s: %s: rst %d st %d\n",
                                 oh->name, __func__, rst_line, ohri->rst_shift,
                                 ohri->st_shift);

                        return 0;
                }
        }

        return -ENOENT;
}

/**
 * _assert_hardreset - assert the HW reset line of submodules
 * contained in the hwmod module.
 * @oh: struct omap_hwmod *
 * @name: name of the reset line to lookup and assert
 *
 * Some IP like dsp, ipu or iva contain processor that require an HW
 * reset line to be assert / deassert in order to enable fully the IP.
 * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of
 * asserting the hardreset line on the currently-booted SoC, or passes
 * along the return value from _lookup_hardreset() or the SoC's
 * assert_hardreset code.
 */
static int _assert_hardreset(struct omap_hwmod *oh, const char *name)
{
        struct omap_hwmod_rst_info ohri;
        int ret = -EINVAL;

        if (!oh)
                return -EINVAL;

        if (!soc_ops.assert_hardreset)
                return -ENOSYS;

        ret = _lookup_hardreset(oh, name, &ohri);
        if (ret < 0)
                return ret;

        ret = soc_ops.assert_hardreset(oh, &ohri);

        return ret;
}

/**
 * _deassert_hardreset - deassert the HW reset line of submodules contained
 * in the hwmod module.
 * @oh: struct omap_hwmod *
 * @name: name of the reset line to look up and deassert
 *
 * Some IP like dsp, ipu or iva contain processor that require an HW
 * reset line to be assert / deassert in order to enable fully the IP.
 * Returns -EINVAL if @oh is null, -ENOSYS if we have no way of
 * deasserting the hardreset line on the currently-booted SoC, or passes
 * along the return value from _lookup_hardreset() or the SoC's
 * deassert_hardreset code.
 */
static int _deassert_hardreset(struct omap_hwmod *oh, const char *name)
{
        struct omap_hwmod_rst_info ohri;
        int ret = -EINVAL;

        if (!oh)
                return -EINVAL;

        if (!soc_ops.deassert_hardreset)
                return -ENOSYS;

        ret = _lookup_hardreset(oh, name, &ohri);
        if (ret < 0)
                return ret;

        if (oh->clkdm) {
                /*
                 * A clockdomain must be in SW_SUP otherwise reset
                 * might not be completed. The clockdomain can be set
                 * in HW_AUTO only when the module become ready.
                 */
                clkdm_deny_idle(oh->clkdm);
                ret = clkdm_hwmod_enable(oh->clkdm, oh);
                if (ret) {
                        WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
                             oh->name, oh->clkdm->name, ret);
                        return ret;
                }
        }

        _enable_clocks(oh);
        if (soc_ops.enable_module)
                soc_ops.enable_module(oh);

        ret = soc_ops.deassert_hardreset(oh, &ohri);

        if (soc_ops.disable_module)
                soc_ops.disable_module(oh);
        _disable_clocks(oh);

        if (ret == -EBUSY)
                pr_warn("omap_hwmod: %s: failed to hardreset\n", oh->name);

        if (oh->clkdm) {
                /*
                 * Set the clockdomain to HW_AUTO, assuming that the
                 * previous state was HW_AUTO.
                 */
                clkdm_allow_idle(oh->clkdm);

                clkdm_hwmod_disable(oh->clkdm, oh);
        }

        return ret;
}

/**
 * _read_hardreset - read the HW reset line state of submodules
 * contained in the hwmod module
 * @oh: struct omap_hwmod *
 * @name: name of the reset line to look up and read
 *
 * Return the state of the reset line.  Returns -EINVAL if @oh is
 * null, -ENOSYS if we have no way of reading the hardreset line
 * status on the currently-booted SoC, or passes along the return
 * value from _lookup_hardreset() or the SoC's is_hardreset_asserted
 * code.
 */
static int _read_hardreset(struct omap_hwmod *oh, const char *name)
{
        struct omap_hwmod_rst_info ohri;
        int ret = -EINVAL;

        if (!oh)
                return -EINVAL;

        if (!soc_ops.is_hardreset_asserted)
                return -ENOSYS;

        ret = _lookup_hardreset(oh, name, &ohri);
        if (ret < 0)
                return ret;

        return soc_ops.is_hardreset_asserted(oh, &ohri);
}

/**
 * _are_all_hardreset_lines_asserted - return true if the @oh is hard-reset
 * @oh: struct omap_hwmod *
 *
 * If all hardreset lines associated with @oh are asserted, then return true.
 * Otherwise, if part of @oh is out hardreset or if no hardreset lines
 * associated with @oh are asserted, then return false.
 * This function is used to avoid executing some parts of the IP block
 * enable/disable sequence if its hardreset line is set.
 */
static bool _are_all_hardreset_lines_asserted(struct omap_hwmod *oh)
{
        int i, rst_cnt = 0;

        if (oh->rst_lines_cnt == 0)
                return false;

        for (i = 0; i < oh->rst_lines_cnt; i++)
                if (_read_hardreset(oh, oh->rst_lines[i].name) > 0)
                        rst_cnt++;

        if (oh->rst_lines_cnt == rst_cnt)
                return true;

        return false;
}

/**
 * _are_any_hardreset_lines_asserted - return true if any part of @oh is
 * hard-reset
 * @oh: struct omap_hwmod *
 *
 * If any hardreset lines associated with @oh are asserted, then
 * return true.  Otherwise, if no hardreset lines associated with @oh
 * are asserted, or if @oh has no hardreset lines, then return false.
 * This function is used to avoid executing some parts of the IP block
 * enable/disable sequence if any hardreset line is set.
 */
static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh)
{
        int rst_cnt = 0;
        int i;

        for (i = 0; i < oh->rst_lines_cnt && rst_cnt == 0; i++)
                if (_read_hardreset(oh, oh->rst_lines[i].name) > 0)
                        rst_cnt++;

        return (rst_cnt) ? true : false;
}

/**
 * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4
 * @oh: struct omap_hwmod *
 *
 * Disable the PRCM module mode related to the hwmod @oh.
 * Return EINVAL if the modulemode is not supported and 0 in case of success.
 */
static int _omap4_disable_module(struct omap_hwmod *oh)
{
        int v;

        if (!oh->clkdm || !oh->prcm.omap4.modulemode ||
            _omap4_clkctrl_managed_by_clkfwk(oh))
                return -EINVAL;

        /*
         * Since integration code might still be doing something, only
         * disable if all lines are under hardreset.
         */
        if (_are_any_hardreset_lines_asserted(oh))
                return 0;

        pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);

        omap_cm_module_disable(oh->clkdm->prcm_partition, oh->clkdm->cm_inst,
                               oh->prcm.omap4.clkctrl_offs);

        v = _omap4_wait_target_disable(oh);
        if (v)
                pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
                        oh->name);

        return 0;
}

/**
 * _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit
 * @oh: struct omap_hwmod *
 *
 * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit.  hwmod must be
 * enabled for this to work.  Returns -ENOENT if the hwmod cannot be
 * reset this way, -EINVAL if the hwmod is in the wrong state,
 * -ETIMEDOUT if the module did not reset in time, or 0 upon success.
 *
 * In OMAP3 a specific SYSSTATUS register is used to get the reset status.
 * Starting in OMAP4, some IPs do not have SYSSTATUS registers and instead
 * use the SYSCONFIG softreset bit to provide the status.
 *
 * Note that some IP like McBSP do have reset control but don't have
 * reset status.
 */
static int _ocp_softreset(struct omap_hwmod *oh)
{
        u32 v;
        int c = 0;
        int ret = 0;

        if (!oh->class->sysc ||
            !(oh->class->sysc->sysc_flags & SYSC_HAS_SOFTRESET))
                return -ENOENT;

        /* clocks must be on for this operation */
        if (oh->_state != _HWMOD_STATE_ENABLED) {
                pr_warn("omap_hwmod: %s: reset can only be entered from enabled state\n",
                        oh->name);
                return -EINVAL;
        }

        /* For some modules, all optionnal clocks need to be enabled as well */
        if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
                _enable_optional_clocks(oh);

        pr_debug("omap_hwmod: %s: resetting via OCP SOFTRESET\n", oh->name);

        v = oh->_sysc_cache;
        ret = _set_softreset(oh, &v);
        if (ret)
                goto dis_opt_clks;

        _write_sysconfig(v, oh);

        if (oh->class->sysc->srst_udelay)
                udelay(oh->class->sysc->srst_udelay);

        c = _wait_softreset_complete(oh);
        if (c == MAX_MODULE_SOFTRESET_WAIT) {
                pr_warn("omap_hwmod: %s: softreset failed (waited %d usec)\n",
                        oh->name, MAX_MODULE_SOFTRESET_WAIT);
                ret = -ETIMEDOUT;
                goto dis_opt_clks;
        } else {
                pr_debug("omap_hwmod: %s: softreset in %d usec\n", oh->name, c);
        }

        ret = _clear_softreset(oh, &v);
        if (ret)
                goto dis_opt_clks;

        _write_sysconfig(v, oh);

        /*
         * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from
         * _wait_target_ready() or _reset()
         */

dis_opt_clks:
        if (oh->flags & HWMOD_CONTROL_OPT_CLKS_IN_RESET)
                _disable_optional_clocks(oh);

        return ret;
}

/**
 * _reset - reset an omap_hwmod
 * @oh: struct omap_hwmod *
 *
 * Resets an omap_hwmod @oh.  If the module has a custom reset
 * function pointer defined, then call it to reset the IP block, and
 * pass along its return value to the caller.  Otherwise, if the IP
 * block has an OCP_SYSCONFIG register with a SOFTRESET bitfield
 * associated with it, call a function to reset the IP block via that
 * method, and pass along the return value to the caller.  Finally, if
 * the IP block has some hardreset lines associated with it, assert
 * all of those, but do _not_ deassert them. (This is because driver
 * authors have expressed an apparent requirement to control the
 * deassertion of the hardreset lines themselves.)
 *
 * The default software reset mechanism for most OMAP IP blocks is
 * triggered via the OCP_SYSCONFIG.SOFTRESET bit.  However, some
 * hwmods cannot be reset via this method.  Some are not targets and
 * therefore have no OCP header registers to access.  Others (like the
 * IVA) have idiosyncratic reset sequences.  So for these relatively
 * rare cases, custom reset code can be supplied in the struct
 * omap_hwmod_class .reset function pointer.
 *
 * _set_dmadisable() is called to set the DMADISABLE bit so that it
 * does not prevent idling of the system. This is necessary for cases
 * where ROMCODE/BOOTLOADER uses dma and transfers control to the
 * kernel without disabling dma.
 *
 * Passes along the return value from either _ocp_softreset() or the
 * custom reset function - these must return -EINVAL if the hwmod
 * cannot be reset this way or if the hwmod is in the wrong state,
 * -ETIMEDOUT if the module did not reset in time, or 0 upon success.
 */
static int _reset(struct omap_hwmod *oh)
{
        int i, r;

        pr_debug("omap_hwmod: %s: resetting\n", oh->name);

        if (oh->class->reset) {
                r = oh->class->reset(oh);
        } else {
                if (oh->rst_lines_cnt > 0) {
                        for (i = 0; i < oh->rst_lines_cnt; i++)
                                _assert_hardreset(oh, oh->rst_lines[i].name);
                        return 0;
                } else {
                        r = _ocp_softreset(oh);
                        if (r == -ENOENT)
                                r = 0;
                }
        }

        _set_dmadisable(oh);

        /*
         * OCP_SYSCONFIG bits need to be reprogrammed after a
         * softreset.  The _enable() function should be split to avoid
         * the rewrite of the OCP_SYSCONFIG register.
         */
        if (oh->class->sysc) {
                _update_sysc_cache(oh);
                _enable_sysc(oh);
        }

        return r;
}

/**
 * _omap4_update_context_lost - increment hwmod context loss counter if
 * hwmod context was lost, and clear hardware context loss reg
 * @oh: hwmod to check for context loss
 *
 * If the PRCM indicates that the hwmod @oh lost context, increment
 * our in-memory context loss counter, and clear the RM_*_CONTEXT
 * bits. No return value.
 */
static void _omap4_update_context_lost(struct omap_hwmod *oh)
{
        if (oh->prcm.omap4.flags & HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT)
                return;

        if (!prm_was_any_context_lost_old(oh->clkdm->pwrdm.ptr->prcm_partition,
                                          oh->clkdm->pwrdm.ptr->prcm_offs,
                                          oh->prcm.omap4.context_offs))
                return;

        oh->prcm.omap4.context_lost_counter++;
        prm_clear_context_loss_flags_old(oh->clkdm->pwrdm.ptr->prcm_partition,
                                         oh->clkdm->pwrdm.ptr->prcm_offs,
                                         oh->prcm.omap4.context_offs);
}

/**
 * _omap4_get_context_lost - get context loss counter for a hwmod
 * @oh: hwmod to get context loss counter for
 *
 * Returns the in-memory context loss counter for a hwmod.
 */
static int _omap4_get_context_lost(struct omap_hwmod *oh)
{
        return oh->prcm.omap4.context_lost_counter;
}

/**
 * _enable - enable an omap_hwmod
 * @oh: struct omap_hwmod *
 *
 * Enables an omap_hwmod @oh such that the MPU can access the hwmod's
 * register target.  Returns -EINVAL if the hwmod is in the wrong
 * state or passes along the return value of _wait_target_ready().
 */
static int _enable(struct omap_hwmod *oh)
{
        int r;

        pr_debug("omap_hwmod: %s: enabling\n", oh->name);

        /*
         * hwmods with HWMOD_INIT_NO_IDLE flag set are left in enabled
         * state at init.
         */
        if (oh->_int_flags & _HWMOD_SKIP_ENABLE) {
                oh->_int_flags &= ~_HWMOD_SKIP_ENABLE;
                return 0;
        }

        if (oh->_state != _HWMOD_STATE_INITIALIZED &&
            oh->_state != _HWMOD_STATE_IDLE &&
            oh->_state != _HWMOD_STATE_DISABLED) {
                WARN(1, "omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state\n",
                        oh->name);
                return -EINVAL;
        }

        /*
         * If an IP block contains HW reset lines and all of them are
         * asserted, we let integration code associated with that
         * block handle the enable.  We've received very little
         * information on what those driver authors need, and until
         * detailed information is provided and the driver code is
         * posted to the public lists, this is probably the best we
         * can do.
         */
        if (_are_all_hardreset_lines_asserted(oh))
                return 0;

        _add_initiator_dep(oh, mpu_oh);

        if (oh->clkdm) {
                /*
                 * A clockdomain must be in SW_SUP before enabling
                 * completely the module. The clockdomain can be set
                 * in HW_AUTO only when the module become ready.
                 */
                clkdm_deny_idle(oh->clkdm);
                r = clkdm_hwmod_enable(oh->clkdm, oh);
                if (r) {
                        WARN(1, "omap_hwmod: %s: could not enable clockdomain %s: %d\n",
                             oh->name, oh->clkdm->name, r);
                        return r;
                }
        }

        _enable_clocks(oh);
        if (soc_ops.enable_module)
                soc_ops.enable_module(oh);
        if (oh->flags & HWMOD_BLOCK_WFI)
                cpu_idle_poll_ctrl(true);

        if (soc_ops.update_context_lost)
                soc_ops.update_context_lost(oh);

        r = (soc_ops.wait_target_ready) ? soc_ops.wait_target_ready(oh) :
                -EINVAL;
        if (oh->clkdm && !(oh->flags & HWMOD_CLKDM_NOAUTO))
                clkdm_allow_idle(oh->clkdm);

        if (!r) {
                oh->_state = _HWMOD_STATE_ENABLED;

                /* Access the sysconfig only if the target is ready */
                if (oh->class->sysc) {
                        if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED))
                                _update_sysc_cache(oh);
                        _enable_sysc(oh);
                }
        } else {
                if (soc_ops.disable_module)
                        soc_ops.disable_module(oh);
                _disable_clocks(oh);
                pr_err("omap_hwmod: %s: _wait_target_ready failed: %d\n",
                       oh->name, r);

                if (oh->clkdm)
                        clkdm_hwmod_disable(oh->clkdm, oh);
        }

        return r;
}

/**
 * _idle - idle an omap_hwmod
 * @oh: struct omap_hwmod *
 *
 * Idles an omap_hwmod @oh.  This should be called once the hwmod has
 * no further work.  Returns -EINVAL if the hwmod is in the wrong
 * state or returns 0.
 */
static int _idle(struct omap_hwmod *oh)
{
        if (oh->flags & HWMOD_NO_IDLE) {
                oh->_int_flags |= _HWMOD_SKIP_ENABLE;
                return 0;
        }

        pr_debug("omap_hwmod: %s: idling\n", oh->name);

        if (_are_all_hardreset_lines_asserted(oh))
                return 0;

        if (oh->_state != _HWMOD_STATE_ENABLED) {
                WARN(1, "omap_hwmod: %s: idle state can only be entered from enabled state\n",
                        oh->name);
                return -EINVAL;
        }

        if (oh->class->sysc)
                _idle_sysc(oh);
        _del_initiator_dep(oh, mpu_oh);

        /*
         * If HWMOD_CLKDM_NOAUTO is set then we don't
         * deny idle the clkdm again since idle was already denied
         * in _enable()
         */
        if (oh->clkdm && !(oh->flags & HWMOD_CLKDM_NOAUTO))
                clkdm_deny_idle(oh->clkdm);

        if (oh->flags & HWMOD_BLOCK_WFI)
                cpu_idle_poll_ctrl(false);
        if (soc_ops.disable_module)
                soc_ops.disable_module(oh);

        /*
         * The module must be in idle mode before disabling any parents
         * clocks. Otherwise, the parent clock might be disabled before
         * the module transition is done, and thus will prevent the
         * transition to complete properly.
         */
        _disable_clocks(oh);
        if (oh->clkdm) {
                clkdm_allow_idle(oh->clkdm);
                clkdm_hwmod_disable(oh->clkdm, oh);
        }

        oh->_state = _HWMOD_STATE_IDLE;

        return 0;
}

/**
 * _shutdown - shutdown an omap_hwmod
 * @oh: struct omap_hwmod *
 *
 * Shut down an omap_hwmod @oh.  This should be called when the driver
 * used for the hwmod is removed or unloaded or if the driver is not
 * used by the system.  Returns -EINVAL if the hwmod is in the wrong
 * state or returns 0.
 */
static int _shutdown(struct omap_hwmod *oh)
{
        int ret, i;
        u8 prev_state;

        if (_are_all_hardreset_lines_asserted(oh))
                return 0;

        if (oh->_state != _HWMOD_STATE_IDLE &&
            oh->_state != _HWMOD_STATE_ENABLED) {
                WARN(1, "omap_hwmod: %s: disabled state can only be entered from idle, or enabled state\n",
                        oh->name);
                return -EINVAL;
        }

        pr_debug("omap_hwmod: %s: disabling\n", oh->name);

        if (oh->class->pre_shutdown) {
                prev_state = oh->_state;
                if (oh->_state == _HWMOD_STATE_IDLE)
                        _enable(oh);
                ret = oh->class->pre_shutdown(oh);
                if (ret) {
                        if (prev_state == _HWMOD_STATE_IDLE)
                                _idle(oh);
                        return ret;
                }
        }

        if (oh->class->sysc) {
                if (oh->_state == _HWMOD_STATE_IDLE)
                        _enable(oh);
                _shutdown_sysc(oh);
        }

        /* clocks and deps are already disabled in idle */
        if (oh->_state == _HWMOD_STATE_ENABLED) {
                _del_initiator_dep(oh, mpu_oh);
                /* XXX what about the other system initiators here? dma, dsp */
                if (oh->flags & HWMOD_BLOCK_WFI)
                        cpu_idle_poll_ctrl(false);
                if (soc_ops.disable_module)
                        soc_ops.disable_module(oh);
                _disable_clocks(oh);
                if (oh->clkdm)
                        clkdm_hwmod_disable(oh->clkdm, oh);
        }
        /* XXX Should this code also force-disable the optional clocks? */

        for (i = 0; i < oh->rst_lines_cnt; i++)
                _assert_hardreset(oh, oh->rst_lines[i].name);

        oh->_state = _HWMOD_STATE_DISABLED;

        return 0;
}

static int of_dev_find_hwmod(struct device_node *np,
                             struct omap_hwmod *oh)
{
        int count, i, res;
        const char *p;

        count = of_property_count_strings(np, "ti,hwmods");
        if (count < 1)
                return -ENODEV;

        for (i = 0; i < count; i++) {
                res = of_property_read_string_index(np, "ti,hwmods",
                                                    i, &p);
                if (res)
                        continue;
                if (!strcmp(p, oh->name)) {
                        pr_debug("omap_hwmod: dt %pOFn[%i] uses hwmod %s\n",
                                 np, i, oh->name);
                        return i;
                }
        }

        return -ENODEV;
}

/**
 * of_dev_hwmod_lookup - look up needed hwmod from dt blob
 * @np: struct device_node *
 * @oh: struct omap_hwmod *
 * @index: index of the entry found
 * @found: struct device_node * found or NULL
 *
 * Parse the dt blob and find out needed hwmod. Recursive function is
 * implemented to take care hierarchical dt blob parsing.
 * Return: Returns 0 on success, -ENODEV when not found.
 */
static int of_dev_hwmod_lookup(struct device_node *np,
                               struct omap_hwmod *oh,
                               int *index,
                               struct device_node **found)
{
        struct device_node *np0 = NULL;
        int res;

        res = of_dev_find_hwmod(np, oh);
        if (res >= 0) {
                *found = np;
                *index = res;
                return 0;
        }

        for_each_child_of_node(np, np0) {
                struct device_node *fc;
                int i;

                res = of_dev_hwmod_lookup(np0, oh, &i, &fc);
                if (res == 0) {
                        *found = fc;
                        *index = i;
                        of_node_put(np0);
                        return 0;
                }
        }

        *found = NULL;
        *index = 0;

        return -ENODEV;
}

/**
 * omap_hwmod_fix_mpu_rt_idx - fix up mpu_rt_idx register offsets
 *
 * @oh: struct omap_hwmod *
 * @np: struct device_node *
 *
 * Fix up module register offsets for modules with mpu_rt_idx.
 * Only needed for cpsw with interconnect target module defined
 * in device tree while still using legacy hwmod platform data
 * for rev, sysc and syss registers.
 *
 * Can be removed when all cpsw hwmod platform data has been
 * dropped.
 */
static void omap_hwmod_fix_mpu_rt_idx(struct omap_hwmod *oh,
                                      struct device_node *np,
                                      struct resource *res)
{
        struct device_node *child = NULL;
        int error;

        child = of_get_next_child(np, child);
        if (!child)
                return;

        error = of_address_to_resource(child, oh->mpu_rt_idx, res);
        if (error)
                pr_err("%s: error mapping mpu_rt_idx: %i\n",
                       __func__, error);
}

/**
 * omap_hwmod_parse_module_range - map module IO range from device tree
 * @oh: struct omap_hwmod *
 * @np: struct device_node *
 *
 * Parse the device tree range an interconnect target module provides
 * for it's child device IP blocks. This way we can support the old
 * "ti,hwmods" property with just dts data without a need for platform
 * data for IO resources. And we don't need all the child IP device
 * nodes available in the dts.
 */
int omap_hwmod_parse_module_range(struct omap_hwmod *oh,
                                  struct device_node *np,
                                  struct resource *res)
{
        struct property *prop;
        const char *name;
        int err;

        of_property_for_each_string(np, "compatible", prop, name)
                if (!strncmp("ti,sysc-", name, 8))
                        break;

        if (!name)
                return -ENOENT;

        err = of_range_to_resource(np, 0, res);
        if (err)
                return err;

        pr_debug("omap_hwmod: %s %pOFn at %pR\n",
                 oh->name, np, res);

        if (oh && oh->mpu_rt_idx) {
                omap_hwmod_fix_mpu_rt_idx(oh, np, res);

                return 0;
        }

        return 0;
}

/**
 * _init_mpu_rt_base - populate the virtual address for a hwmod
 * @oh: struct omap_hwmod * to locate the virtual address
 * @data: (unused, caller should pass NULL)
 * @index: index of the reg entry iospace in device tree
 * @np: struct device_node * of the IP block's device node in the DT data
 *
 * Cache the virtual address used by the MPU to access this IP block's
 * registers.  This address is needed early so the OCP registers that
 * are part of the device's address space can be ioremapped properly.
 *
 * If SYSC access is not needed, the registers will not be remapped
 * and non-availability of MPU access is not treated as an error.
 *
 * Returns 0 on success, -EINVAL if an invalid hwmod is passed, and
 * -ENXIO on absent or invalid register target address space.
 */
static int __init _init_mpu_rt_base(struct omap_hwmod *oh, void *data,
                                    int index, struct device_node *np)
{
        void __iomem *va_start = NULL;
        struct resource res;
        int error;

        if (!oh)
                return -EINVAL;

        _save_mpu_port_index(oh);

        /* if we don't need sysc access we don't need to ioremap */
        if (!oh->class->sysc)
                return 0;

        /* we can't continue without MPU PORT if we need sysc access */
        if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
                return -ENXIO;

        if (!np) {
                pr_err("omap_hwmod: %s: no dt node\n", oh->name);
                return -ENXIO;
        }

        /* Do we have a dts range for the interconnect target module? */
        error = omap_hwmod_parse_module_range(oh, np, &res);
        if (!error)
                va_start = ioremap(res.start, resource_size(&res));

        /* No ranges, rely on device reg entry */
        if (!va_start)
                va_start = of_iomap(np, index + oh->mpu_rt_idx);
        if (!va_start) {
                pr_err("omap_hwmod: %s: Missing dt reg%i for %pOF\n",
                       oh->name, index, np);
                return -ENXIO;
        }

        pr_debug("omap_hwmod: %s: MPU register target at va %p\n",
                 oh->name, va_start);

        oh->_mpu_rt_va = va_start;
        return 0;
}

static void __init parse_module_flags(struct omap_hwmod *oh,
                                      struct device_node *np)
{
        if (of_property_read_bool(np, "ti,no-reset-on-init"))
                oh->flags |= HWMOD_INIT_NO_RESET;
        if (of_property_read_bool(np, "ti,no-idle-on-init"))
                oh->flags |= HWMOD_INIT_NO_IDLE;
        if (of_property_read_bool(np, "ti,no-idle"))
                oh->flags |= HWMOD_NO_IDLE;
}

/**
 * _init - initialize internal data for the hwmod @oh
 * @oh: struct omap_hwmod *
 * @data: (unused)
 *
 * Look up the clocks and the address space used by the MPU to access
 * registers belonging to the hwmod @oh.  @oh must already be
 * registered at this point.  This is the first of two phases for
 * hwmod initialization.  Code called here does not touch any hardware
 * registers, it simply prepares internal data structures.  Returns 0
 * upon success or if the hwmod isn't registered or if the hwmod's
 * address space is not defined, or -EINVAL upon failure.
 */
static int __init _init(struct omap_hwmod *oh, void *data)
{
        int r, index;
        struct device_node *np = NULL;
        struct device_node *bus;

        if (oh->_state != _HWMOD_STATE_REGISTERED)
                return 0;

        bus = of_find_node_by_name(NULL, "ocp");
        if (!bus)
                return -ENODEV;

        r = of_dev_hwmod_lookup(bus, oh, &index, &np);
        if (r)
                pr_debug("omap_hwmod: %s missing dt data\n", oh->name);
        else if (np && index)
                pr_warn("omap_hwmod: %s using broken dt data from %pOFn\n",
                        oh->name, np);

        r = _init_mpu_rt_base(oh, NULL, index, np);
        if (r < 0) {
                WARN(1, "omap_hwmod: %s: doesn't have mpu register target base\n",
                     oh->name);
                return 0;
        }

        r = _init_clocks(oh, np);
        if (r < 0) {
                WARN(1, "omap_hwmod: %s: couldn't init clocks\n", oh->name);
                return -EINVAL;
        }

        if (np) {
                struct device_node *child;

                parse_module_flags(oh, np);
                child = of_get_next_child(np, NULL);
                if (child)
                        parse_module_flags(oh, child);
        }

        oh->_state = _HWMOD_STATE_INITIALIZED;

        return 0;
}

/**
 * _setup_iclk_autoidle - configure an IP block's interface clocks
 * @oh: struct omap_hwmod *
 *
 * Set up the module's interface clocks.  XXX This function is still mostly
 * a stub; implementing this properly requires iclk autoidle usecounting in
 * the clock code.   No return value.
 */
static void _setup_iclk_autoidle(struct omap_hwmod *oh)
{
        struct omap_hwmod_ocp_if *os;

        if (oh->_state != _HWMOD_STATE_INITIALIZED)
                return;

        list_for_each_entry(os, &oh->slave_ports, node) {
                if (!os->_clk)
                        continue;

                if (os->flags & OCPIF_SWSUP_IDLE) {
                        /*
                         * we might have multiple users of one iclk with
                         * different requirements, disable autoidle when
                         * the module is enabled, e.g. dss iclk
                         */
                } else {
                        /* we are enabling autoidle afterwards anyways */
                        clk_enable(os->_clk);
                }
        }

        return;
}

/**
 * _setup_reset - reset an IP block during the setup process
 * @oh: struct omap_hwmod *
 *
 * Reset the IP block corresponding to the hwmod @oh during the setup
 * process.  The IP block is first enabled so it can be successfully
 * reset.  Returns 0 upon success or a negative error code upon
 * failure.
 */
static int _setup_reset(struct omap_hwmod *oh)
{
        int r = 0;

        if (oh->_state != _HWMOD_STATE_INITIALIZED)
                return -EINVAL;

        if (oh->flags & HWMOD_EXT_OPT_MAIN_CLK)
                return -EPERM;

        if (oh->rst_lines_cnt == 0) {
                r = _enable(oh);
                if (r) {
                        pr_warn("omap_hwmod: %s: cannot be enabled for reset (%d)\n",
                                oh->name, oh->_state);
                        return -EINVAL;
                }
        }

        if (!(oh->flags & HWMOD_INIT_NO_RESET))
                r = _reset(oh);

        return r;
}

/**
 * _setup_postsetup - transition to the appropriate state after _setup
 * @oh: struct omap_hwmod *
 *
 * Place an IP block represented by @oh into a "post-setup" state --
 * either IDLE, ENABLED, or DISABLED.  ("post-setup" simply means that
 * this function is called at the end of _setup().)  The postsetup
 * state for an IP block can be changed by calling
 * omap_hwmod_enter_postsetup_state() early in the boot process,
 * before one of the omap_hwmod_setup*() functions are called for the
 * IP block.
 *
 * The IP block stays in this state until a PM runtime-based driver is
 * loaded for that IP block.  A post-setup state of IDLE is
 * appropriate for almost all IP blocks with runtime PM-enabled
 * drivers, since those drivers are able to enable the IP block.  A
 * post-setup state of ENABLED is appropriate for kernels with PM
 * runtime disabled.  The DISABLED state is appropriate for unusual IP
 * blocks such as the MPU WDTIMER on kernels without WDTIMER drivers
 * included, since the WDTIMER starts running on reset and will reset
 * the MPU if left active.
 *
 * This post-setup mechanism is deprecated.  Once all of the OMAP
 * drivers have been converted to use PM runtime, and all of the IP
 * block data and interconnect data is available to the hwmod code, it
 * should be possible to replace this mechanism with a "lazy reset"
 * arrangement.  In a "lazy reset" setup, each IP block is enabled
 * when the driver first probes, then all remaining IP blocks without
 * drivers are either shut down or enabled after the drivers have
 * loaded.  However, this cannot take place until the above
 * preconditions have been met, since otherwise the late reset code
 * has no way of knowing which IP blocks are in use by drivers, and
 * which ones are unused.
 *
 * No return value.
 */
static void _setup_postsetup(struct omap_hwmod *oh)
{
        u8 postsetup_state;

        if (oh->rst_lines_cnt > 0)
                return;

        postsetup_state = oh->_postsetup_state;
        if (postsetup_state == _HWMOD_STATE_UNKNOWN)
                postsetup_state = _HWMOD_STATE_ENABLED;

        /*
         * XXX HWMOD_INIT_NO_IDLE does not belong in hwmod data -
         * it should be set by the core code as a runtime flag during startup
         */
        if ((oh->flags & (HWMOD_INIT_NO_IDLE | HWMOD_NO_IDLE)) &&
            (postsetup_state == _HWMOD_STATE_IDLE)) {
                oh->_int_flags |= _HWMOD_SKIP_ENABLE;
                postsetup_state = _HWMOD_STATE_ENABLED;
        }

        if (postsetup_state == _HWMOD_STATE_IDLE)
                _idle(oh);
        else if (postsetup_state == _HWMOD_STATE_DISABLED)
                _shutdown(oh);
        else if (postsetup_state != _HWMOD_STATE_ENABLED)
                WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n",
                     oh->name, postsetup_state);

        return;
}

/**
 * _setup - prepare IP block hardware for use
 * @oh: struct omap_hwmod *
 * @data: (unused, pass NULL)
 *
 * Configure the IP block represented by @oh.  This may include
 * enabling the IP block, resetting it, and placing it into a
 * post-setup state, depending on the type of IP block and applicable
 * flags.  IP blocks are reset to prevent any previous configuration
 * by the bootloader or previous operating system from interfering
 * with power management or other parts of the system.  The reset can
 * be avoided; see omap_hwmod_no_setup_reset().  This is the second of
 * two phases for hwmod initialization.  Code called here generally
 * affects the IP block hardware, or system integration hardware
 * associated with the IP block.  Returns 0.
 */
static int _setup(struct omap_hwmod *oh, void *data)
{
        if (oh->_state != _HWMOD_STATE_INITIALIZED)
                return 0;

        if (oh->parent_hwmod) {
                int r;

                r = _enable(oh->parent_hwmod);
                WARN(r, "hwmod: %s: setup: failed to enable parent hwmod %s\n",
                     oh->name, oh->parent_hwmod->name);
        }

        _setup_iclk_autoidle(oh);

        if (!_setup_reset(oh))
                _setup_postsetup(oh);

        if (oh->parent_hwmod) {
                u8 postsetup_state;

                postsetup_state = oh->parent_hwmod->_postsetup_state;

                if (postsetup_state == _HWMOD_STATE_IDLE)
                        _idle(oh->parent_hwmod);
                else if (postsetup_state == _HWMOD_STATE_DISABLED)
                        _shutdown(oh->parent_hwmod);
                else if (postsetup_state != _HWMOD_STATE_ENABLED)
                        WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n",
                             oh->parent_hwmod->name, postsetup_state);
        }

        return 0;
}

/**
 * _register - register a struct omap_hwmod
 * @oh: struct omap_hwmod *
 *
 * Registers the omap_hwmod @oh.  Returns -EEXIST if an omap_hwmod
 * already has been registered by the same name; -EINVAL if the
 * omap_hwmod is in the wrong state, if @oh is NULL, if the
 * omap_hwmod's class field is NULL; if the omap_hwmod is missing a
 * name, or if the omap_hwmod's class is missing a name; or 0 upon
 * success.
 *
 * XXX The data should be copied into bootmem, so the original data
 * should be marked __initdata and freed after init.  This would allow
 * unneeded omap_hwmods to be freed on multi-OMAP configurations.  Note
 * that the copy process would be relatively complex due to the large number
 * of substructures.
 */
static int _register(struct omap_hwmod *oh)
{
        if (!oh || !oh->name || !oh->class || !oh->class->name ||
            (oh->_state != _HWMOD_STATE_UNKNOWN))
                return -EINVAL;

        pr_debug("omap_hwmod: %s: registering\n", oh->name);

        if (_lookup(oh->name))
                return -EEXIST;

        list_add_tail(&oh->node, &omap_hwmod_list);

        INIT_LIST_HEAD(&oh->slave_ports);
        spin_lock_init(&oh->_lock);
        lockdep_set_class(&oh->_lock, &oh->hwmod_key);

        oh->_state = _HWMOD_STATE_REGISTERED;

        /*
         * XXX Rather than doing a strcmp(), this should test a flag
         * set in the hwmod data, inserted by the autogenerator code.
         */
        if (!strcmp(oh->name, MPU_INITIATOR_NAME))
                mpu_oh = oh;

        return 0;
}

/**
 * _add_link - add an interconnect between two IP blocks
 * @oi: pointer to a struct omap_hwmod_ocp_if record
 *
 * Add struct omap_hwmod_link records connecting the slave IP block
 * specified in @oi->slave to @oi.  This code is assumed to run before
 * preemption or SMP has been enabled, thus avoiding the need for
 * locking in this code.  Changes to this assumption will require
 * additional locking.  Returns 0.
 */
static int _add_link(struct omap_hwmod_ocp_if *oi)
{
        pr_debug("omap_hwmod: %s -> %s: adding link\n", oi->master->name,
                 oi->slave->name);

        list_add(&oi->node, &oi->slave->slave_ports);
        oi->slave->slaves_cnt++;

        return 0;
}

/**
 * _register_link - register a struct omap_hwmod_ocp_if
 * @oi: struct omap_hwmod_ocp_if *
 *
 * Registers the omap_hwmod_ocp_if record @oi.  Returns -EEXIST if it
 * has already been registered; -EINVAL if @oi is NULL or if the
 * record pointed to by @oi is missing required fields; or 0 upon
 * success.
 *
 * XXX The data should be copied into bootmem, so the original data
 * should be marked __initdata and freed after init.  This would allow
 * unneeded omap_hwmods to be freed on multi-OMAP configurations.
 */
static int __init _register_link(struct omap_hwmod_ocp_if *oi)
{
        if (!oi || !oi->master || !oi->slave || !oi->user)
                return -EINVAL;

        if (oi->_int_flags & _OCPIF_INT_FLAGS_REGISTERED)
                return -EEXIST;

        pr_debug("omap_hwmod: registering link from %s to %s\n",
                 oi->master->name, oi->slave->name);

        /*
         * Register the connected hwmods, if they haven't been
         * registered already
         */
        if (oi->master->_state != _HWMOD_STATE_REGISTERED)
                _register(oi->master);

        if (oi->slave->_state != _HWMOD_STATE_REGISTERED)
                _register(oi->slave);

        _add_link(oi);

        oi->_int_flags |= _OCPIF_INT_FLAGS_REGISTERED;

        return 0;
}

/* Static functions intended only for use in soc_ops field function pointers */

/**
 * _omap2xxx_3xxx_wait_target_ready - wait for a module to leave slave idle
 * @oh: struct omap_hwmod *
 *
 * Wait for a module @oh to leave slave idle.  Returns 0 if the module
 * does not have an IDLEST bit or if the module successfully leaves
 * slave idle; otherwise, pass along the return value of the
 * appropriate *_cm*_wait_module_ready() function.
 */
static int _omap2xxx_3xxx_wait_target_ready(struct omap_hwmod *oh)
{
        if (!oh)
                return -EINVAL;

        if (oh->flags & HWMOD_NO_IDLEST)
                return 0;

        if (!_find_mpu_rt_port(oh))
                return 0;

        /* XXX check module SIDLEMODE, hardreset status, enabled clocks */

        return omap_cm_wait_module_ready(0, oh->prcm.omap2.module_offs,
                                         oh->prcm.omap2.idlest_reg_id,
                                         oh->prcm.omap2.idlest_idle_bit);
}

/**
 * _omap4_wait_target_ready - wait for a module to leave slave idle
 * @oh: struct omap_hwmod *
 *
 * Wait for a module @oh to leave slave idle.  Returns 0 if the module
 * does not have an IDLEST bit or if the module successfully leaves
 * slave idle; otherwise, pass along the return value of the
 * appropriate *_cm*_wait_module_ready() function.
 */
static int _omap4_wait_target_ready(struct omap_hwmod *oh)
{
        if (!oh)
                return -EINVAL;

        if (oh->flags & HWMOD_NO_IDLEST || !oh->clkdm)
                return 0;

        if (!_find_mpu_rt_port(oh))
                return 0;

        if (_omap4_clkctrl_managed_by_clkfwk(oh))
                return 0;

        if (!_omap4_has_clkctrl_clock(oh))
                return 0;

        /* XXX check module SIDLEMODE, hardreset status */

        return omap_cm_wait_module_ready(oh->clkdm->prcm_partition,
                                         oh->clkdm->cm_inst,
                                         oh->prcm.omap4.clkctrl_offs, 0);
}

/**
 * _omap2_assert_hardreset - call OMAP2 PRM hardreset fn with hwmod args
 * @oh: struct omap_hwmod * to assert hardreset
 * @ohri: hardreset line data
 *
 * Call omap2_prm_assert_hardreset() with parameters extracted from
 * the hwmod @oh and the hardreset line data @ohri.  Only intended for
 * use as an soc_ops function pointer.  Passes along the return value
 * from omap2_prm_assert_hardreset().  XXX This function is scheduled
 * for removal when the PRM code is moved into drivers/.
 */
static int _omap2_assert_hardreset(struct omap_hwmod *oh,
                                   struct omap_hwmod_rst_info *ohri)
{
        return omap_prm_assert_hardreset(ohri->rst_shift, 0,
                                         oh->prcm.omap2.module_offs, 0);
}

/**
 * _omap2_deassert_hardreset - call OMAP2 PRM hardreset fn with hwmod args
 * @oh: struct omap_hwmod * to deassert hardreset
 * @ohri: hardreset line data
 *
 * Call omap2_prm_deassert_hardreset() with parameters extracted from
 * the hwmod @oh and the hardreset line data @ohri.  Only intended for
 * use as an soc_ops function pointer.  Passes along the return value
 * from omap2_prm_deassert_hardreset().  XXX This function is
 * scheduled for removal when the PRM code is moved into drivers/.
 */
static int _omap2_deassert_hardreset(struct omap_hwmod *oh,
                                     struct omap_hwmod_rst_info *ohri)
{
        return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, 0,
                                           oh->prcm.omap2.module_offs, 0, 0);
}

/**
 * _omap2_is_hardreset_asserted - call OMAP2 PRM hardreset fn with hwmod args
 * @oh: struct omap_hwmod * to test hardreset
 * @ohri: hardreset line data
 *
 * Call omap2_prm_is_hardreset_asserted() with parameters extracted
 * from the hwmod @oh and the hardreset line data @ohri.  Only
 * intended for use as an soc_ops function pointer.  Passes along the
 * return value from omap2_prm_is_hardreset_asserted().  XXX This
 * function is scheduled for removal when the PRM code is moved into
 * drivers/.
 */
static int _omap2_is_hardreset_asserted(struct omap_hwmod *oh,
                                        struct omap_hwmod_rst_info *ohri)
{
        return omap_prm_is_hardreset_asserted(ohri->st_shift, 0,
                                              oh->prcm.omap2.module_offs, 0);
}

/**
 * _omap4_assert_hardreset - call OMAP4 PRM hardreset fn with hwmod args
 * @oh: struct omap_hwmod * to assert hardreset
 * @ohri: hardreset line data
 *
 * Call omap4_prminst_assert_hardreset() with parameters extracted
 * from the hwmod @oh and the hardreset line data @ohri.  Only
 * intended for use as an soc_ops function pointer.  Passes along the
 * return value from omap4_prminst_assert_hardreset().  XXX This
 * function is scheduled for removal when the PRM code is moved into
 * drivers/.
 */
static int _omap4_assert_hardreset(struct omap_hwmod *oh,
                                   struct omap_hwmod_rst_info *ohri)
{
        if (!oh->clkdm)
                return -EINVAL;

        return omap_prm_assert_hardreset(ohri->rst_shift,
                                         oh->clkdm->pwrdm.ptr->prcm_partition,
                                         oh->clkdm->pwrdm.ptr->prcm_offs,
                                         oh->prcm.omap4.rstctrl_offs);
}

/**
 * _omap4_deassert_hardreset - call OMAP4 PRM hardreset fn with hwmod args
 * @oh: struct omap_hwmod * to deassert hardreset
 * @ohri: hardreset line data
 *
 * Call omap4_prminst_deassert_hardreset() with parameters extracted
 * from the hwmod @oh and the hardreset line data @ohri.  Only
 * intended for use as an soc_ops function pointer.  Passes along the
 * return value from omap4_prminst_deassert_hardreset().  XXX This
 * function is scheduled for removal when the PRM code is moved into
 * drivers/.
 */
static int _omap4_deassert_hardreset(struct omap_hwmod *oh,
                                     struct omap_hwmod_rst_info *ohri)
{
        if (!oh->clkdm)
                return -EINVAL;

        if (ohri->st_shift)
                pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
                       oh->name, ohri->name);
        return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->rst_shift,
                                           oh->clkdm->pwrdm.ptr->prcm_partition,
                                           oh->clkdm->pwrdm.ptr->prcm_offs,
                                           oh->prcm.omap4.rstctrl_offs,
                                           oh->prcm.omap4.rstctrl_offs +
                                           OMAP4_RST_CTRL_ST_OFFSET);
}

/**
 * _omap4_is_hardreset_asserted - call OMAP4 PRM hardreset fn with hwmod args
 * @oh: struct omap_hwmod * to test hardreset
 * @ohri: hardreset line data
 *
 * Call omap4_prminst_is_hardreset_asserted() with parameters
 * extracted from the hwmod @oh and the hardreset line data @ohri.
 * Only intended for use as an soc_ops function pointer.  Passes along
 * the return value from omap4_prminst_is_hardreset_asserted().  XXX
 * This function is scheduled for removal when the PRM code is moved
 * into drivers/.
 */
static int _omap4_is_hardreset_asserted(struct omap_hwmod *oh,
                                        struct omap_hwmod_rst_info *ohri)
{
        if (!oh->clkdm)
                return -EINVAL;

        return omap_prm_is_hardreset_asserted(ohri->rst_shift,
                                              oh->clkdm->pwrdm.ptr->
                                              prcm_partition,
                                              oh->clkdm->pwrdm.ptr->prcm_offs,
                                              oh->prcm.omap4.rstctrl_offs);
}

/**
 * _omap4_disable_direct_prcm - disable direct PRCM control for hwmod
 * @oh: struct omap_hwmod * to disable control for
 *
 * Disables direct PRCM clkctrl done by hwmod core. Instead, the hwmod
 * will be using its main_clk to enable/disable the module. Returns
 * 0 if successful.
 */
static int _omap4_disable_direct_prcm(struct omap_hwmod *oh)
{
        if (!oh)
                return -EINVAL;

        oh->prcm.omap4.flags |= HWMOD_OMAP4_CLKFWK_CLKCTR_CLOCK;

        return 0;
}

/**
 * _am33xx_deassert_hardreset - call AM33XX PRM hardreset fn with hwmod args
 * @oh: struct omap_hwmod * to deassert hardreset
 * @ohri: hardreset line data
 *
 * Call am33xx_prminst_deassert_hardreset() with parameters extracted
 * from the hwmod @oh and the hardreset line data @ohri.  Only
 * intended for use as an soc_ops function pointer.  Passes along the
 * return value from am33xx_prminst_deassert_hardreset().  XXX This
 * function is scheduled for removal when the PRM code is moved into
 * drivers/.
 */
static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
                                     struct omap_hwmod_rst_info *ohri)
{
        return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift,
                                           oh->clkdm->pwrdm.ptr->prcm_partition,
                                           oh->clkdm->pwrdm.ptr->prcm_offs,
                                           oh->prcm.omap4.rstctrl_offs,
                                           oh->prcm.omap4.rstst_offs);
}

/* Public functions */

u32 omap_hwmod_read(struct omap_hwmod *oh, u16 reg_offs)
{
        if (oh->flags & HWMOD_16BIT_REG)
                return readw_relaxed(oh->_mpu_rt_va + reg_offs);
        else
                return readl_relaxed(oh->_mpu_rt_va + reg_offs);
}

void omap_hwmod_write(u32 v, struct omap_hwmod *oh, u16 reg_offs)
{
        if (oh->flags & HWMOD_16BIT_REG)
                writew_relaxed(v, oh->_mpu_rt_va + reg_offs);
        else
                writel_relaxed(v, oh->_mpu_rt_va + reg_offs);
}

/**
 * omap_hwmod_softreset - reset a module via SYSCONFIG.SOFTRESET bit
 * @oh: struct omap_hwmod *
 *
 * This is a public function exposed to drivers. Some drivers may need to do
 * some settings before and after resetting the device.  Those drivers after
 * doing the necessary settings could use this function to start a reset by
 * setting the SYSCONFIG.SOFTRESET bit.
 */
int omap_hwmod_softreset(struct omap_hwmod *oh)
{
        u32 v;
        int ret;

        if (!oh || !(oh->_sysc_cache))
                return -EINVAL;

        v = oh->_sysc_cache;
        ret = _set_softreset(oh, &v);
        if (ret)
                goto error;
        _write_sysconfig(v, oh);

        ret = _clear_softreset(oh, &v);
        if (ret)
                goto error;
        _write_sysconfig(v, oh);

error:
        return ret;
}

/**
 * omap_hwmod_lookup - look up a registered omap_hwmod by name
 * @name: name of the omap_hwmod to look up
 *
 * Given a @name of an omap_hwmod, return a pointer to the registered
 * struct omap_hwmod *, or NULL upon error.
 */
struct omap_hwmod *omap_hwmod_lookup(const char *name)
{
        struct omap_hwmod *oh;

        if (!name)
                return NULL;

        oh = _lookup(name);

        return oh;
}

/**
 * omap_hwmod_for_each - call function for each registered omap_hwmod
 * @fn: pointer to a callback function
 * @data: void * data to pass to callback function
 *
 * Call @fn for each registered omap_hwmod, passing @data to each
 * function.  @fn must return 0 for success or any other value for
 * failure.  If @fn returns non-zero, the iteration across omap_hwmods
 * will stop and the non-zero return value will be passed to the
 * caller of omap_hwmod_for_each().  @fn is called with
 * omap_hwmod_for_each() held.
 */
int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh, void *data),
                        void *data)
{
        struct omap_hwmod *temp_oh;
        int ret = 0;

        if (!fn)
                return -EINVAL;

        list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
                ret = (*fn)(temp_oh, data);
                if (ret)
                        break;
        }

        return ret;
}

/**
 * omap_hwmod_register_links - register an array of hwmod links
 * @ois: pointer to an array of omap_hwmod_ocp_if to register
 *
 * Intended to be called early in boot before the clock framework is
 * initialized.  If @ois is not null, will register all omap_hwmods
 * listed in @ois that are valid for this chip.  Returns -EINVAL if
 * omap_hwmod_init() hasn't been called before calling this function,
 * -ENOMEM if the link memory area can't be allocated, or 0 upon
 * success.
 */
int __init omap_hwmod_register_links(struct omap_hwmod_ocp_if **ois)
{
        int r, i;

        if (!inited)
                return -EINVAL;

        if (!ois)
                return 0;

        if (ois[0] == NULL) /* Empty list */
                return 0;

        i = 0;
        do {
                r = _register_link(ois[i]);
                WARN(r && r != -EEXIST,
                     "omap_hwmod: _register_link(%s -> %s) returned %d\n",
                     ois[i]->master->name, ois[i]->slave->name, r);
        } while (ois[++i]);

        return 0;
}

static int __init omap_hwmod_setup_one(const char *oh_name);

/**
 * _ensure_mpu_hwmod_is_setup - ensure the MPU SS hwmod is init'ed and set up
 * @oh: pointer to the hwmod currently being set up (usually not the MPU)
 *
 * If the hwmod data corresponding to the MPU subsystem IP block
 * hasn't been initialized and set up yet, do so now.  This must be
 * done first since sleep dependencies may be added from other hwmods
 * to the MPU.  Intended to be called only by omap_hwmod_setup*().  No
 * return value.
 */
static void __init _ensure_mpu_hwmod_is_setup(struct omap_hwmod *oh)
{
        if (!mpu_oh || mpu_oh->_state == _HWMOD_STATE_UNKNOWN)
                pr_err("omap_hwmod: %s: MPU initiator hwmod %s not yet registered\n",
                       __func__, MPU_INITIATOR_NAME);
        else if (mpu_oh->_state == _HWMOD_STATE_REGISTERED && oh != mpu_oh)
                omap_hwmod_setup_one(MPU_INITIATOR_NAME);
}

/**
 * omap_hwmod_setup_one - set up a single hwmod
 * @oh_name: const char * name of the already-registered hwmod to set up
 *
 * Initialize and set up a single hwmod.  Intended to be used for a
 * small number of early devices, such as the timer IP blocks used for
 * the scheduler clock.  Must be called after omap2_clk_init().
 * Resolves the struct clk names to struct clk pointers for each
 * registered omap_hwmod.  Also calls _setup() on each hwmod.  Returns
 * -EINVAL upon error or 0 upon success.
 */
static int __init omap_hwmod_setup_one(const char *oh_name)
{
        struct omap_hwmod *oh;

        pr_debug("omap_hwmod: %s: %s\n", oh_name, __func__);

        oh = _lookup(oh_name);
        if (!oh) {
                WARN(1, "omap_hwmod: %s: hwmod not yet registered\n", oh_name);
                return -EINVAL;
        }

        _ensure_mpu_hwmod_is_setup(oh);

        _init(oh, NULL);
        _setup(oh, NULL);

        return 0;
}

static void omap_hwmod_check_one(struct device *dev,
                                 const char *name, s8 v1, u8 v2)
{
        if (v1 < 0)
                return;

        if (v1 != v2)
                dev_warn(dev, "%s %d != %d\n", name, v1, v2);
}

/**
 * omap_hwmod_check_sysc - check sysc against platform sysc
 * @dev: struct device
 * @data: module data
 * @sysc_fields: new sysc configuration
 */
static int omap_hwmod_check_sysc(struct device *dev,
                                 const struct ti_sysc_module_data *data,
                                 struct sysc_regbits *sysc_fields)
{
        const struct sysc_regbits *regbits = data->cap->regbits;

        omap_hwmod_check_one(dev, "dmadisable_shift",
                             regbits->dmadisable_shift,
                             sysc_fields->dmadisable_shift);
        omap_hwmod_check_one(dev, "midle_shift",
                             regbits->midle_shift,
                             sysc_fields->midle_shift);
        omap_hwmod_check_one(dev, "sidle_shift",
                             regbits->sidle_shift,
                             sysc_fields->sidle_shift);
        omap_hwmod_check_one(dev, "clkact_shift",
                             regbits->clkact_shift,
                             sysc_fields->clkact_shift);
        omap_hwmod_check_one(dev, "enwkup_shift",
                             regbits->enwkup_shift,
                             sysc_fields->enwkup_shift);
        omap_hwmod_check_one(dev, "srst_shift",
                             regbits->srst_shift,
                             sysc_fields->srst_shift);
        omap_hwmod_check_one(dev, "autoidle_shift",
                             regbits->autoidle_shift,
                             sysc_fields->autoidle_shift);

        return 0;
}

/**
 * omap_hwmod_init_regbits - init sysconfig specific register bits
 * @dev: struct device
 * @oh: module
 * @data: module data
 * @sysc_fields: new sysc configuration
 */
static int omap_hwmod_init_regbits(struct device *dev, struct omap_hwmod *oh,
                                   const struct ti_sysc_module_data *data,
                                   struct sysc_regbits **sysc_fields)
{
        switch (data->cap->type) {
        case TI_SYSC_OMAP2:
        case TI_SYSC_OMAP2_TIMER:
                *sysc_fields = &omap_hwmod_sysc_type1;
                break;
        case TI_SYSC_OMAP3_SHAM:
                *sysc_fields = &omap3_sham_sysc_fields;
                break;
        case TI_SYSC_OMAP3_AES:
                *sysc_fields = &omap3xxx_aes_sysc_fields;
                break;
        case TI_SYSC_OMAP4:
        case TI_SYSC_OMAP4_TIMER:
                *sysc_fields = &omap_hwmod_sysc_type2;
                break;
        case TI_SYSC_OMAP4_SIMPLE:
                *sysc_fields = &omap_hwmod_sysc_type3;
                break;
        case TI_SYSC_OMAP34XX_SR:
                *sysc_fields = &omap34xx_sr_sysc_fields;
                break;
        case TI_SYSC_OMAP36XX_SR:
                *sysc_fields = &omap36xx_sr_sysc_fields;
                break;
        case TI_SYSC_OMAP4_SR:
                *sysc_fields = &omap36xx_sr_sysc_fields;
                break;
        case TI_SYSC_OMAP4_MCASP:
                *sysc_fields = &omap_hwmod_sysc_type_mcasp;
                break;
        case TI_SYSC_OMAP4_USB_HOST_FS:
                *sysc_fields = &omap_hwmod_sysc_type_usb_host_fs;
                break;
        default:
                *sysc_fields = NULL;
                if (!oh->class->sysc->sysc_fields)
                        return 0;

                dev_err(dev, "sysc_fields not found\n");

                return -EINVAL;
        }

        return omap_hwmod_check_sysc(dev, data, *sysc_fields);
}

/**
 * omap_hwmod_init_reg_offs - initialize sysconfig register offsets
 * @dev: struct device
 * @data: module data
 * @rev_offs: revision register offset
 * @sysc_offs: sysc register offset
 * @syss_offs: syss register offset
 */
static int omap_hwmod_init_reg_offs(struct device *dev,
                                    const struct ti_sysc_module_data *data,
                                    s32 *rev_offs, s32 *sysc_offs,
                                    s32 *syss_offs)
{
        *rev_offs = -ENODEV;
        *sysc_offs = 0;
        *syss_offs = 0;

        if (data->offsets[SYSC_REVISION] >= 0)
                *rev_offs = data->offsets[SYSC_REVISION];

        if (data->offsets[SYSC_SYSCONFIG] >= 0)
                *sysc_offs = data->offsets[SYSC_SYSCONFIG];

        if (data->offsets[SYSC_SYSSTATUS] >= 0)
                *syss_offs = data->offsets[SYSC_SYSSTATUS];

        return 0;
}

/**
 * omap_hwmod_init_sysc_flags - initialize sysconfig features
 * @dev: struct device
 * @data: module data
 * @sysc_flags: module configuration
 */
static int omap_hwmod_init_sysc_flags(struct device *dev,
                                      const struct ti_sysc_module_data *data,
                                      u32 *sysc_flags)
{
        *sysc_flags = 0;

        switch (data->cap->type) {
        case TI_SYSC_OMAP2:
        case TI_SYSC_OMAP2_TIMER:
                /* See SYSC_OMAP2_* in include/dt-bindings/bus/ti-sysc.h */
                if (data->cfg->sysc_val & SYSC_OMAP2_CLOCKACTIVITY)
                        *sysc_flags |= SYSC_HAS_CLOCKACTIVITY;
                if (data->cfg->sysc_val & SYSC_OMAP2_EMUFREE)
                        *sysc_flags |= SYSC_HAS_EMUFREE;
                if (data->cfg->sysc_val & SYSC_OMAP2_ENAWAKEUP)
                        *sysc_flags |= SYSC_HAS_ENAWAKEUP;
                if (data->cfg->sysc_val & SYSC_OMAP2_SOFTRESET)
                        *sysc_flags |= SYSC_HAS_SOFTRESET;
                if (data->cfg->sysc_val & SYSC_OMAP2_AUTOIDLE)
                        *sysc_flags |= SYSC_HAS_AUTOIDLE;
                break;
        case TI_SYSC_OMAP4:
        case TI_SYSC_OMAP4_TIMER:
                /* See SYSC_OMAP4_* in include/dt-bindings/bus/ti-sysc.h */
                if (data->cfg->sysc_val & SYSC_OMAP4_DMADISABLE)
                        *sysc_flags |= SYSC_HAS_DMADISABLE;
                if (data->cfg->sysc_val & SYSC_OMAP4_FREEEMU)
                        *sysc_flags |= SYSC_HAS_EMUFREE;
                if (data->cfg->sysc_val & SYSC_OMAP4_SOFTRESET)
                        *sysc_flags |= SYSC_HAS_SOFTRESET;
                break;
        case TI_SYSC_OMAP34XX_SR:
        case TI_SYSC_OMAP36XX_SR:
                /* See SYSC_OMAP3_SR_* in include/dt-bindings/bus/ti-sysc.h */
                if (data->cfg->sysc_val & SYSC_OMAP3_SR_ENAWAKEUP)
                        *sysc_flags |= SYSC_HAS_ENAWAKEUP;
                break;
        default:
                if (data->cap->regbits->emufree_shift >= 0)
                        *sysc_flags |= SYSC_HAS_EMUFREE;
                if (data->cap->regbits->enwkup_shift >= 0)
                        *sysc_flags |= SYSC_HAS_ENAWAKEUP;
                if (data->cap->regbits->srst_shift >= 0)
                        *sysc_flags |= SYSC_HAS_SOFTRESET;
                if (data->cap->regbits->autoidle_shift >= 0)
                        *sysc_flags |= SYSC_HAS_AUTOIDLE;
                break;
        }

        if (data->cap->regbits->midle_shift >= 0 &&
            data->cfg->midlemodes)
                *sysc_flags |= SYSC_HAS_MIDLEMODE;

        if (data->cap->regbits->sidle_shift >= 0 &&
            data->cfg->sidlemodes)
                *sysc_flags |= SYSC_HAS_SIDLEMODE;

        if (data->cfg->quirks & SYSC_QUIRK_UNCACHED)
                *sysc_flags |= SYSC_NO_CACHE;
        if (data->cfg->quirks & SYSC_QUIRK_RESET_STATUS)
                *sysc_flags |= SYSC_HAS_RESET_STATUS;

        if (data->cfg->syss_mask & 1)
                *sysc_flags |= SYSS_HAS_RESET_STATUS;

        return 0;
}

/**
 * omap_hwmod_init_idlemodes - initialize module idle modes
 * @dev: struct device
 * @data: module data
 * @idlemodes: module supported idle modes
 */
static int omap_hwmod_init_idlemodes(struct device *dev,
                                     const struct ti_sysc_module_data *data,
                                     u32 *idlemodes)
{
        *idlemodes = 0;

        if (data->cfg->midlemodes & BIT(SYSC_IDLE_FORCE))
                *idlemodes |= MSTANDBY_FORCE;
        if (data->cfg->midlemodes & BIT(SYSC_IDLE_NO))
                *idlemodes |= MSTANDBY_NO;
        if (data->cfg->midlemodes & BIT(SYSC_IDLE_SMART))
                *idlemodes |= MSTANDBY_SMART;
        if (data->cfg->midlemodes & BIT(SYSC_IDLE_SMART_WKUP))
                *idlemodes |= MSTANDBY_SMART_WKUP;

        if (data->cfg->sidlemodes & BIT(SYSC_IDLE_FORCE))
                *idlemodes |= SIDLE_FORCE;
        if (data->cfg->sidlemodes & BIT(SYSC_IDLE_NO))
                *idlemodes |= SIDLE_NO;
        if (data->cfg->sidlemodes & BIT(SYSC_IDLE_SMART))
                *idlemodes |= SIDLE_SMART;
        if (data->cfg->sidlemodes & BIT(SYSC_IDLE_SMART_WKUP))
                *idlemodes |= SIDLE_SMART_WKUP;

        return 0;
}

/**
 * omap_hwmod_check_module - check new module against platform data
 * @dev: struct device
 * @oh: module
 * @data: new module data
 * @sysc_fields: sysc register bits
 * @rev_offs: revision register offset
 * @sysc_offs: sysconfig register offset
 * @syss_offs: sysstatus register offset
 * @sysc_flags: sysc specific flags
 * @idlemodes: sysc supported idlemodes
 */
static int omap_hwmod_check_module(struct device *dev,
                                   struct omap_hwmod *oh,
                                   const struct ti_sysc_module_data *data,
                                   struct sysc_regbits *sysc_fields,
                                   s32 rev_offs, s32 sysc_offs,
                                   s32 syss_offs, u32 sysc_flags,
                                   u32 idlemodes)
{
        if (!oh->class->sysc)
                return -ENODEV;

        if (oh->class->sysc->sysc_fields &&
            sysc_fields != oh->class->sysc->sysc_fields)
                dev_warn(dev, "sysc_fields mismatch\n");

        if (rev_offs != oh->class->sysc->rev_offs)
                dev_warn(dev, "rev_offs %08x != %08x\n", rev_offs,
                         oh->class->sysc->rev_offs);
        if (sysc_offs != oh->class->sysc->sysc_offs)
                dev_warn(dev, "sysc_offs %08x != %08x\n", sysc_offs,
                         oh->class->sysc->sysc_offs);
        if (syss_offs != oh->class->sysc->syss_offs)
                dev_warn(dev, "syss_offs %08x != %08x\n", syss_offs,
                         oh->class->sysc->syss_offs);

        if (sysc_flags != oh->class->sysc->sysc_flags)
                dev_warn(dev, "sysc_flags %08x != %08x\n", sysc_flags,
                         oh->class->sysc->sysc_flags);

        if (idlemodes != oh->class->sysc->idlemodes)
                dev_warn(dev, "idlemodes %08x != %08x\n", idlemodes,
                         oh->class->sysc->idlemodes);

        if (data->cfg->srst_udelay != oh->class->sysc->srst_udelay)
                dev_warn(dev, "srst_udelay %i != %i\n",
                         data->cfg->srst_udelay,
                         oh->class->sysc->srst_udelay);

        return 0;
}

/**
 * omap_hwmod_allocate_module - allocate new module
 * @dev: struct device
 * @oh: module
 * @data: module data
 * @sysc_fields: sysc register bits
 * @clkdm: clockdomain
 * @rev_offs: revision register offset
 * @sysc_offs: sysconfig register offset
 * @syss_offs: sysstatus register offset
 * @sysc_flags: sysc specific flags
 * @idlemodes: sysc supported idlemodes
 *
 * Note that the allocations here cannot use devm as ti-sysc can rebind.
 */
static int omap_hwmod_allocate_module(struct device *dev, struct omap_hwmod *oh,
                                      const struct ti_sysc_module_data *data,
                                      struct sysc_regbits *sysc_fields,
                                      struct clockdomain *clkdm,
                                      s32 rev_offs, s32 sysc_offs,
                                      s32 syss_offs, u32 sysc_flags,
                                      u32 idlemodes)
{
        struct omap_hwmod_class_sysconfig *sysc;
        struct omap_hwmod_class *class = NULL;
        struct omap_hwmod_ocp_if *oi = NULL;
        void __iomem *regs = NULL;
        unsigned long flags;

        sysc = kzalloc_obj(*sysc);
        if (!sysc)
                return -ENOMEM;

        sysc->sysc_fields = sysc_fields;
        sysc->rev_offs = rev_offs;
        sysc->sysc_offs = sysc_offs;
        sysc->syss_offs = syss_offs;
        sysc->sysc_flags = sysc_flags;
        sysc->idlemodes = idlemodes;
        sysc->srst_udelay = data->cfg->srst_udelay;

        if (!oh->_mpu_rt_va) {
                regs = ioremap(data->module_pa,
                               data->module_size);
                if (!regs)
                        goto out_free_sysc;
        }

        /*
         * We may need a new oh->class as the other devices in the same class
         * may not yet have ioremapped their registers.
         */
        if (oh->class->name && strcmp(oh->class->name, data->name)) {
                class = kmemdup(oh->class, sizeof(*oh->class), GFP_KERNEL);
                if (!class)
                        goto out_unmap;
        }

        if (list_empty(&oh->slave_ports)) {
                oi = kzalloc_obj(*oi);
                if (!oi)
                        goto out_free_class;

                /*
                 * Note that we assume interconnect interface clocks will be
                 * managed by the interconnect driver for OCPIF_SWSUP_IDLE case
                 * on omap24xx and omap3.
                 */
                oi->slave = oh;
                oi->user = OCP_USER_MPU | OCP_USER_SDMA;
        }

        spin_lock_irqsave(&oh->_lock, flags);
        if (regs)
                oh->_mpu_rt_va = regs;
        if (class)
                oh->class = class;
        oh->class->sysc = sysc;
        if (oi)
                _add_link(oi);
        if (clkdm)
                oh->clkdm = clkdm;
        oh->_state = _HWMOD_STATE_INITIALIZED;
        oh->_postsetup_state = _HWMOD_STATE_DEFAULT;
        _setup(oh, NULL);
        spin_unlock_irqrestore(&oh->_lock, flags);

        return 0;

out_free_class:
        kfree(class);
out_unmap:
        iounmap(regs);
out_free_sysc:
        kfree(sysc);
        return -ENOMEM;
}

static const struct omap_hwmod_reset omap24xx_reset_quirks[] = {
        { .match = "msdi", .len = 4, .reset = omap_msdi_reset, },
};

static const struct omap_hwmod_reset omap_reset_quirks[] = {
        { .match = "dss_core", .len = 8, .reset = omap_dss_reset, },
        { .match = "hdq1w", .len = 5, .reset = omap_hdq1w_reset, },
        { .match = "i2c", .len = 3, .reset = omap_i2c_reset, },
        { .match = "wd_timer", .len = 8, .reset = omap2_wd_timer_reset, },
};

static void
omap_hwmod_init_reset_quirk(struct device *dev, struct omap_hwmod *oh,
                            const struct ti_sysc_module_data *data,
                            const struct omap_hwmod_reset *quirks,
                            int quirks_sz)
{
        const struct omap_hwmod_reset *quirk;
        int i;

        for (i = 0; i < quirks_sz; i++) {
                quirk = &quirks[i];
                if (!strncmp(data->name, quirk->match, quirk->len)) {
                        oh->class->reset = quirk->reset;

                        return;
                }
        }
}

static void
omap_hwmod_init_reset_quirks(struct device *dev, struct omap_hwmod *oh,
                             const struct ti_sysc_module_data *data)
{
        if (soc_is_omap24xx())
                omap_hwmod_init_reset_quirk(dev, oh, data,
                                            omap24xx_reset_quirks,
                                            ARRAY_SIZE(omap24xx_reset_quirks));

        omap_hwmod_init_reset_quirk(dev, oh, data, omap_reset_quirks,
                                    ARRAY_SIZE(omap_reset_quirks));
}

/**
 * omap_hwmod_init_module - initialize new module
 * @dev: struct device
 * @data: module data
 * @cookie: cookie for the caller to use for later calls
 */
int omap_hwmod_init_module(struct device *dev,
                           const struct ti_sysc_module_data *data,
                           struct ti_sysc_cookie *cookie)
{
        struct omap_hwmod *oh;
        struct sysc_regbits *sysc_fields;
        s32 rev_offs, sysc_offs, syss_offs;
        u32 sysc_flags, idlemodes;
        int error;

        if (!dev || !data || !data->name || !cookie)
                return -EINVAL;

        oh = _lookup(data->name);
        if (!oh) {
                oh = kzalloc_obj(*oh);
                if (!oh)
                        return -ENOMEM;

                oh->name = data->name;
                oh->_state = _HWMOD_STATE_UNKNOWN;
                lockdep_register_key(&oh->hwmod_key);

                /* Unused, can be handled by PRM driver handling resets */
                oh->prcm.omap4.flags = HWMOD_OMAP4_NO_CONTEXT_LOSS_BIT;

                oh->class = kzalloc_obj(*oh->class);
                if (!oh->class) {
                        kfree(oh);
                        return -ENOMEM;
                }

                omap_hwmod_init_reset_quirks(dev, oh, data);

                oh->class->name = data->name;
                mutex_lock(&list_lock);
                error = _register(oh);
                mutex_unlock(&list_lock);
        }

        cookie->data = oh;

        error = omap_hwmod_init_regbits(dev, oh, data, &sysc_fields);
        if (error)
                return error;

        error = omap_hwmod_init_reg_offs(dev, data, &rev_offs,
                                         &sysc_offs, &syss_offs);
        if (error)
                return error;

        error = omap_hwmod_init_sysc_flags(dev, data, &sysc_flags);
        if (error)
                return error;

        error = omap_hwmod_init_idlemodes(dev, data, &idlemodes);
        if (error)
                return error;

        if (data->cfg->quirks & SYSC_QUIRK_NO_IDLE)
                oh->flags |= HWMOD_NO_IDLE;
        if (data->cfg->quirks & SYSC_QUIRK_NO_IDLE_ON_INIT)
                oh->flags |= HWMOD_INIT_NO_IDLE;
        if (data->cfg->quirks & SYSC_QUIRK_NO_RESET_ON_INIT)
                oh->flags |= HWMOD_INIT_NO_RESET;
        if (data->cfg->quirks & SYSC_QUIRK_USE_CLOCKACT)
                oh->flags |= HWMOD_SET_DEFAULT_CLOCKACT;
        if (data->cfg->quirks & SYSC_QUIRK_SWSUP_SIDLE)
                oh->flags |= HWMOD_SWSUP_SIDLE;
        if (data->cfg->quirks & SYSC_QUIRK_SWSUP_SIDLE_ACT)
                oh->flags |= HWMOD_SWSUP_SIDLE_ACT;
        if (data->cfg->quirks & SYSC_QUIRK_SWSUP_MSTANDBY)
                oh->flags |= HWMOD_SWSUP_MSTANDBY;
        if (data->cfg->quirks & SYSC_QUIRK_CLKDM_NOAUTO)
                oh->flags |= HWMOD_CLKDM_NOAUTO;

        error = omap_hwmod_check_module(dev, oh, data, sysc_fields,
                                        rev_offs, sysc_offs, syss_offs,
                                        sysc_flags, idlemodes);
        if (!error)
                return error;

        return omap_hwmod_allocate_module(dev, oh, data, sysc_fields,
                                          cookie->clkdm, rev_offs,
                                          sysc_offs, syss_offs,
                                          sysc_flags, idlemodes);
}

/**
 * omap_hwmod_setup_earlycon_flags - set up flags for early console
 *
 * Enable DEBUG_OMAPUART_FLAGS for uart hwmod that is being used as
 * early concole so that hwmod core doesn't reset and keep it in idle
 * that specific uart.
 */
#ifdef CONFIG_SERIAL_EARLYCON
static void __init omap_hwmod_setup_earlycon_flags(void)
{
        struct device_node *np;
        struct omap_hwmod *oh;
        const char *uart;

        np = of_find_node_by_path("/chosen");
        if (np) {
                uart = of_get_property(np, "stdout-path", NULL);
                if (uart) {
                        np = of_find_node_by_path(uart);
                        if (np) {
                                uart = of_get_property(np, "ti,hwmods", NULL);
                                oh = omap_hwmod_lookup(uart);
                                if (!oh) {
                                        uart = of_get_property(np->parent,
                                                               "ti,hwmods",
                                                               NULL);
                                        oh = omap_hwmod_lookup(uart);
                                }
                                if (oh)
                                        oh->flags |= DEBUG_OMAPUART_FLAGS;
                        }
                }
        }
}
#endif

/**
 * omap_hwmod_setup_all - set up all registered IP blocks
 *
 * Initialize and set up all IP blocks registered with the hwmod code.
 * Must be called after omap2_clk_init().  Resolves the struct clk
 * names to struct clk pointers for each registered omap_hwmod.  Also
 * calls _setup() on each hwmod.  Returns 0 upon success.
 */
static int __init omap_hwmod_setup_all(void)
{
        if (!inited)
                return 0;

        _ensure_mpu_hwmod_is_setup(NULL);

        omap_hwmod_for_each(_init, NULL);
#ifdef CONFIG_SERIAL_EARLYCON
        omap_hwmod_setup_earlycon_flags();
#endif
        omap_hwmod_for_each(_setup, NULL);

        return 0;
}
omap_postcore_initcall(omap_hwmod_setup_all);

/**
 * omap_hwmod_enable - enable an omap_hwmod
 * @oh: struct omap_hwmod *
 *
 * Enable an omap_hwmod @oh.  Intended to be called by omap_device_enable().
 * Returns -EINVAL on error or passes along the return value from _enable().
 */
int omap_hwmod_enable(struct omap_hwmod *oh)
{
        int r;
        unsigned long flags;

        if (!oh)
                return -EINVAL;

        spin_lock_irqsave(&oh->_lock, flags);
        r = _enable(oh);
        spin_unlock_irqrestore(&oh->_lock, flags);

        return r;
}

/**
 * omap_hwmod_idle - idle an omap_hwmod
 * @oh: struct omap_hwmod *
 *
 * Idle an omap_hwmod @oh.  Intended to be called by omap_device_idle().
 * Returns -EINVAL on error or passes along the return value from _idle().
 */
int omap_hwmod_idle(struct omap_hwmod *oh)
{
        int r;
        unsigned long flags;

        if (!oh)
                return -EINVAL;

        spin_lock_irqsave(&oh->_lock, flags);
        r = _idle(oh);
        spin_unlock_irqrestore(&oh->_lock, flags);

        return r;
}

/**
 * omap_hwmod_shutdown - shutdown an omap_hwmod
 * @oh: struct omap_hwmod *
 *
 * Shutdown an omap_hwmod @oh.  Intended to be called by
 * omap_device_shutdown().  Returns -EINVAL on error or passes along
 * the return value from _shutdown().
 */
int omap_hwmod_shutdown(struct omap_hwmod *oh)
{
        int r;
        unsigned long flags;

        if (!oh)
                return -EINVAL;

        spin_lock_irqsave(&oh->_lock, flags);
        r = _shutdown(oh);
        spin_unlock_irqrestore(&oh->_lock, flags);

        return r;
}

/*
 * IP block data retrieval functions
 */

/**
 * omap_hwmod_get_mpu_rt_va - return the module's base address (for the MPU)
 * @oh: struct omap_hwmod *
 *
 * Returns the virtual address corresponding to the beginning of the
 * module's register target, in the address range that is intended to
 * be used by the MPU.  Returns the virtual address upon success or NULL
 * upon error.
 */
void __iomem *omap_hwmod_get_mpu_rt_va(struct omap_hwmod *oh)
{
        if (!oh)
                return NULL;

        if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
                return NULL;

        if (oh->_state == _HWMOD_STATE_UNKNOWN)
                return NULL;

        return oh->_mpu_rt_va;
}

/*
 * XXX what about functions for drivers to save/restore ocp_sysconfig
 * for context save/restore operations?
 */

/**
 * omap_hwmod_assert_hardreset - assert the HW reset line of submodules
 * contained in the hwmod module.
 * @oh: struct omap_hwmod *
 * @name: name of the reset line to lookup and assert
 *
 * Some IP like dsp, ipu or iva contain processor that require
 * an HW reset line to be assert / deassert in order to enable fully
 * the IP.  Returns -EINVAL if @oh is null or if the operation is not
 * yet supported on this OMAP; otherwise, passes along the return value
 * from _assert_hardreset().
 */
int omap_hwmod_assert_hardreset(struct omap_hwmod *oh, const char *name)
{
        int ret;
        unsigned long flags;

        if (!oh)
                return -EINVAL;

        spin_lock_irqsave(&oh->_lock, flags);
        ret = _assert_hardreset(oh, name);
        spin_unlock_irqrestore(&oh->_lock, flags);

        return ret;
}

/**
 * omap_hwmod_deassert_hardreset - deassert the HW reset line of submodules
 * contained in the hwmod module.
 * @oh: struct omap_hwmod *
 * @name: name of the reset line to look up and deassert
 *
 * Some IP like dsp, ipu or iva contain processor that require
 * an HW reset line to be assert / deassert in order to enable fully
 * the IP.  Returns -EINVAL if @oh is null or if the operation is not
 * yet supported on this OMAP; otherwise, passes along the return value
 * from _deassert_hardreset().
 */
int omap_hwmod_deassert_hardreset(struct omap_hwmod *oh, const char *name)
{
        int ret;
        unsigned long flags;

        if (!oh)
                return -EINVAL;

        spin_lock_irqsave(&oh->_lock, flags);
        ret = _deassert_hardreset(oh, name);
        spin_unlock_irqrestore(&oh->_lock, flags);

        return ret;
}

/**
 * omap_hwmod_for_each_by_class - call @fn for each hwmod of class @classname
 * @classname: struct omap_hwmod_class name to search for
 * @fn: callback function pointer to call for each hwmod in class @classname
 * @user: arbitrary context data to pass to the callback function
 *
 * For each omap_hwmod of class @classname, call @fn.
 * If the callback function returns something other than
 * zero, the iterator is terminated, and the callback function's return
 * value is passed back to the caller.  Returns 0 upon success, -EINVAL
 * if @classname or @fn are NULL, or passes back the error code from @fn.
 */
int omap_hwmod_for_each_by_class(const char *classname,
                                 int (*fn)(struct omap_hwmod *oh,
                                           void *user),
                                 void *user)
{
        struct omap_hwmod *temp_oh;
        int ret = 0;

        if (!classname || !fn)
                return -EINVAL;

        pr_debug("omap_hwmod: %s: looking for modules of class %s\n",
                 __func__, classname);

        list_for_each_entry(temp_oh, &omap_hwmod_list, node) {
                if (!strcmp(temp_oh->class->name, classname)) {
                        pr_debug("omap_hwmod: %s: %s: calling callback fn\n",
                                 __func__, temp_oh->name);
                        ret = (*fn)(temp_oh, user);
                        if (ret)
                                break;
                }
        }

        if (ret)
                pr_debug("omap_hwmod: %s: iterator terminated early: %d\n",
                         __func__, ret);

        return ret;
}

/**
 * omap_hwmod_set_postsetup_state - set the post-_setup() state for this hwmod
 * @oh: struct omap_hwmod *
 * @state: state that _setup() should leave the hwmod in
 *
 * Sets the hwmod state that @oh will enter at the end of _setup()
 * (called by omap_hwmod_setup_*()).  See also the documentation
 * for _setup_postsetup(), above.  Returns 0 upon success or
 * -EINVAL if there is a problem with the arguments or if the hwmod is
 * in the wrong state.
 */
int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state)
{
        int ret;
        unsigned long flags;

        if (!oh)
                return -EINVAL;

        if (state != _HWMOD_STATE_DISABLED &&
            state != _HWMOD_STATE_ENABLED &&
            state != _HWMOD_STATE_IDLE)
                return -EINVAL;

        spin_lock_irqsave(&oh->_lock, flags);

        if (oh->_state != _HWMOD_STATE_REGISTERED) {
                ret = -EINVAL;
                goto ohsps_unlock;
        }

        oh->_postsetup_state = state;
        ret = 0;

ohsps_unlock:
        spin_unlock_irqrestore(&oh->_lock, flags);

        return ret;
}

/**
 * omap_hwmod_init - initialize the hwmod code
 *
 * Sets up some function pointers needed by the hwmod code to operate on the
 * currently-booted SoC.  Intended to be called once during kernel init
 * before any hwmods are registered.  No return value.
 */
void __init omap_hwmod_init(void)
{
        if (cpu_is_omap24xx()) {
                soc_ops.wait_target_ready = _omap2xxx_3xxx_wait_target_ready;
                soc_ops.assert_hardreset = _omap2_assert_hardreset;
                soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
                soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
        } else if (cpu_is_omap34xx()) {
                soc_ops.wait_target_ready = _omap2xxx_3xxx_wait_target_ready;
                soc_ops.assert_hardreset = _omap2_assert_hardreset;
                soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
                soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
                soc_ops.init_clkdm = _init_clkdm;
        } else if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx()) {
                soc_ops.enable_module = _omap4_enable_module;
                soc_ops.disable_module = _omap4_disable_module;
                soc_ops.wait_target_ready = _omap4_wait_target_ready;
                soc_ops.assert_hardreset = _omap4_assert_hardreset;
                soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
                soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
                soc_ops.init_clkdm = _init_clkdm;
                soc_ops.update_context_lost = _omap4_update_context_lost;
                soc_ops.get_context_lost = _omap4_get_context_lost;
                soc_ops.disable_direct_prcm = _omap4_disable_direct_prcm;
                soc_ops.xlate_clkctrl = _omap4_xlate_clkctrl;
        } else if (cpu_is_ti814x() || cpu_is_ti816x() || soc_is_am33xx() ||
                   soc_is_am43xx()) {
                soc_ops.enable_module = _omap4_enable_module;
                soc_ops.disable_module = _omap4_disable_module;
                soc_ops.wait_target_ready = _omap4_wait_target_ready;
                soc_ops.assert_hardreset = _omap4_assert_hardreset;
                soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
                soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
                soc_ops.init_clkdm = _init_clkdm;
                soc_ops.disable_direct_prcm = _omap4_disable_direct_prcm;
                soc_ops.xlate_clkctrl = _omap4_xlate_clkctrl;
        } else {
                WARN(1, "omap_hwmod: unknown SoC type\n");
        }

        _init_clkctrl_providers();

        inited = true;
}