// SPDX-License-Identifier: GPL-2.0-only
/*
 *
 *  Copyright (C) 2011-2012 John Crispin <john@phrozen.org>
 *  Copyright (C) 2013-2015 Lantiq Beteiligungs-GmbH & Co.KG
 */

#include <linux/ioport.h>
#include <linux/export.h>
#include <linux/clkdev.h>
#include <linux/spinlock.h>
#include <linux/of.h>
#include <linux/of_address.h>

#include <lantiq_soc.h>

#include "../clk.h"
#include "../prom.h"

/* clock control register for legacy */
#define CGU_IFCCR       0x0018
#define CGU_IFCCR_VR9   0x0024
/* system clock register for legacy */
#define CGU_SYS         0x0010
/* pci control register */
#define CGU_PCICR       0x0034
#define CGU_PCICR_VR9   0x0038
/* ephy configuration register */
#define CGU_EPHY        0x10

/* Legacy PMU register for ar9, ase, danube */
/* power control register */
#define PMU_PWDCR       0x1C
/* power status register */
#define PMU_PWDSR       0x20
/* power control register */
#define PMU_PWDCR1      0x24
/* power status register */
#define PMU_PWDSR1      0x28
/* power control register */
#define PWDCR(x) ((x) ? (PMU_PWDCR1) : (PMU_PWDCR))
/* power status register */
#define PWDSR(x) ((x) ? (PMU_PWDSR1) : (PMU_PWDSR))


/* PMU register for ar10 and grx390 */

/* First register set */
#define PMU_CLK_SR      0x20 /* status */
#define PMU_CLK_CR_A    0x24 /* Enable */
#define PMU_CLK_CR_B    0x28 /* Disable */
/* Second register set */
#define PMU_CLK_SR1     0x30 /* status */
#define PMU_CLK_CR1_A   0x34 /* Enable */
#define PMU_CLK_CR1_B   0x38 /* Disable */
/* Third register set */
#define PMU_ANA_SR      0x40 /* status */
#define PMU_ANA_CR_A    0x44 /* Enable */
#define PMU_ANA_CR_B    0x48 /* Disable */

/* Status */
static u32 pmu_clk_sr[] = {
        PMU_CLK_SR,
        PMU_CLK_SR1,
        PMU_ANA_SR,
};

/* Enable */
static u32 pmu_clk_cr_a[] = {
        PMU_CLK_CR_A,
        PMU_CLK_CR1_A,
        PMU_ANA_CR_A,
};

/* Disable */
static u32 pmu_clk_cr_b[] = {
        PMU_CLK_CR_B,
        PMU_CLK_CR1_B,
        PMU_ANA_CR_B,
};

#define PWDCR_EN_XRX(x)         (pmu_clk_cr_a[(x)])
#define PWDCR_DIS_XRX(x)        (pmu_clk_cr_b[(x)])
#define PWDSR_XRX(x)            (pmu_clk_sr[(x)])

/* clock gates that we can en/disable */
#define PMU_USB0_P      BIT(0)
#define PMU_ASE_SDIO    BIT(2) /* ASE special */
#define PMU_PCI         BIT(4)
#define PMU_DMA         BIT(5)
#define PMU_USB0        BIT(6)
#define PMU_ASC0        BIT(7)
#define PMU_EPHY        BIT(7)  /* ase */
#define PMU_USIF        BIT(7) /* from vr9 until grx390 */
#define PMU_SPI         BIT(8)
#define PMU_DFE         BIT(9)
#define PMU_EBU         BIT(10)
#define PMU_STP         BIT(11)
#define PMU_GPT         BIT(12)
#define PMU_AHBS        BIT(13) /* vr9 */
#define PMU_FPI         BIT(14)
#define PMU_AHBM        BIT(15)
#define PMU_SDIO        BIT(16) /* danube, ar9, vr9 */
#define PMU_ASC1        BIT(17)
#define PMU_PPE_QSB     BIT(18)
#define PMU_PPE_SLL01   BIT(19)
#define PMU_DEU         BIT(20)
#define PMU_PPE_TC      BIT(21)
#define PMU_PPE_EMA     BIT(22)
#define PMU_PPE_DPLUM   BIT(23)
#define PMU_PPE_DP      BIT(23)
#define PMU_PPE_DPLUS   BIT(24)
#define PMU_USB1_P      BIT(26)
#define PMU_GPHY3       BIT(26) /* grx390 */
#define PMU_USB1        BIT(27)
#define PMU_SWITCH      BIT(28)
#define PMU_PPE_TOP     BIT(29)
#define PMU_GPHY0       BIT(29) /* ar10, xrx390 */
#define PMU_GPHY        BIT(30)
#define PMU_GPHY1       BIT(30) /* ar10, xrx390 */
#define PMU_PCIE_CLK    BIT(31)
#define PMU_GPHY2       BIT(31) /* ar10, xrx390 */

#define PMU1_PCIE_PHY   BIT(0)  /* vr9-specific,moved in ar10/grx390 */
#define PMU1_PCIE_CTL   BIT(1)
#define PMU1_PCIE_PDI   BIT(4)
#define PMU1_PCIE_MSI   BIT(5)
#define PMU1_CKE        BIT(6)
#define PMU1_PCIE1_CTL  BIT(17)
#define PMU1_PCIE1_PDI  BIT(20)
#define PMU1_PCIE1_MSI  BIT(21)
#define PMU1_PCIE2_CTL  BIT(25)
#define PMU1_PCIE2_PDI  BIT(26)
#define PMU1_PCIE2_MSI  BIT(27)

#define PMU_ANALOG_USB0_P       BIT(0)
#define PMU_ANALOG_USB1_P       BIT(1)
#define PMU_ANALOG_PCIE0_P      BIT(8)
#define PMU_ANALOG_PCIE1_P      BIT(9)
#define PMU_ANALOG_PCIE2_P      BIT(10)
#define PMU_ANALOG_DSL_AFE      BIT(16)
#define PMU_ANALOG_DCDC_2V5     BIT(17)
#define PMU_ANALOG_DCDC_1VX     BIT(18)
#define PMU_ANALOG_DCDC_1V0     BIT(19)

#define pmu_w32(x, y)   ltq_w32((x), pmu_membase + (y))
#define pmu_r32(x)      ltq_r32(pmu_membase + (x))

static void __iomem *pmu_membase;
void __iomem *ltq_cgu_membase;
void __iomem *ltq_ebu_membase;

static u32 ifccr = CGU_IFCCR;
static u32 pcicr = CGU_PCICR;

static DEFINE_SPINLOCK(g_pmu_lock);

/* legacy function kept alive to ease clkdev transition */
void ltq_pmu_enable(unsigned int module)
{
        int retry = 1000000;

        spin_lock(&g_pmu_lock);
        pmu_w32(pmu_r32(PMU_PWDCR) & ~module, PMU_PWDCR);
        do {} while (--retry && (pmu_r32(PMU_PWDSR) & module));
        spin_unlock(&g_pmu_lock);

        if (!retry)
                panic("activating PMU module failed!");
}
EXPORT_SYMBOL(ltq_pmu_enable);

/* legacy function kept alive to ease clkdev transition */
void ltq_pmu_disable(unsigned int module)
{
        int retry = 1000000;

        spin_lock(&g_pmu_lock);
        pmu_w32(pmu_r32(PMU_PWDCR) | module, PMU_PWDCR);
        do {} while (--retry && (!(pmu_r32(PMU_PWDSR) & module)));
        spin_unlock(&g_pmu_lock);

        if (!retry)
                pr_warn("deactivating PMU module failed!");
}
EXPORT_SYMBOL(ltq_pmu_disable);

/* enable a hw clock */
static int cgu_enable(struct clk *clk)
{
        ltq_cgu_w32(ltq_cgu_r32(ifccr) | clk->bits, ifccr);
        return 0;
}

/* disable a hw clock */
static void cgu_disable(struct clk *clk)
{
        ltq_cgu_w32(ltq_cgu_r32(ifccr) & ~clk->bits, ifccr);
}

/* enable a clock gate */
static int pmu_enable(struct clk *clk)
{
        int retry = 1000000;

        if (of_machine_is_compatible("lantiq,ar10")
            || of_machine_is_compatible("lantiq,grx390")) {
                pmu_w32(clk->bits, PWDCR_EN_XRX(clk->module));
                do {} while (--retry &&
                             (!(pmu_r32(PWDSR_XRX(clk->module)) & clk->bits)));

        } else {
                spin_lock(&g_pmu_lock);
                pmu_w32(pmu_r32(PWDCR(clk->module)) & ~clk->bits,
                                PWDCR(clk->module));
                do {} while (--retry &&
                             (pmu_r32(PWDSR(clk->module)) & clk->bits));
                spin_unlock(&g_pmu_lock);
        }

        if (!retry)
                panic("activating PMU module failed!");

        return 0;
}

/* disable a clock gate */
static void pmu_disable(struct clk *clk)
{
        int retry = 1000000;

        if (of_machine_is_compatible("lantiq,ar10")
            || of_machine_is_compatible("lantiq,grx390")) {
                pmu_w32(clk->bits, PWDCR_DIS_XRX(clk->module));
                do {} while (--retry &&
                             (pmu_r32(PWDSR_XRX(clk->module)) & clk->bits));
        } else {
                spin_lock(&g_pmu_lock);
                pmu_w32(pmu_r32(PWDCR(clk->module)) | clk->bits,
                                PWDCR(clk->module));
                do {} while (--retry &&
                             (!(pmu_r32(PWDSR(clk->module)) & clk->bits)));
                spin_unlock(&g_pmu_lock);
        }

        if (!retry)
                pr_warn("deactivating PMU module failed!");
}

static void usb_set_clock(void)
{
        unsigned int val = ltq_cgu_r32(ifccr);

        if (of_machine_is_compatible("lantiq,ar10") ||
            of_machine_is_compatible("lantiq,grx390")) {
                val &= ~0x03; /* XTAL divided by 3 */
        } else if (of_machine_is_compatible("lantiq,ar9") ||
                   of_machine_is_compatible("lantiq,vr9")) {
                /* TODO: this depends on the XTAL frequency */
                val |= 0x03; /* XTAL divided by 3 */
        } else if (of_machine_is_compatible("lantiq,ase")) {
                val |= 0x20; /* from XTAL */
        } else if (of_machine_is_compatible("lantiq,danube")) {
                val |= 0x30; /* 12 MHz, generated from 36 MHz */
        }
        ltq_cgu_w32(val, ifccr);
}

/* the pci enable helper */
static int pci_enable(struct clk *clk)
{
        unsigned int val = ltq_cgu_r32(ifccr);
        /* set bus clock speed */
        if (of_machine_is_compatible("lantiq,ar9") ||
                        of_machine_is_compatible("lantiq,vr9")) {
                val &= ~0x1f00000;
                if (clk->rate == CLOCK_33M)
                        val |= 0xe00000;
                else
                        val |= 0x700000; /* 62.5M */
        } else {
                val &= ~0xf00000;
                if (clk->rate == CLOCK_33M)
                        val |= 0x800000;
                else
                        val |= 0x400000; /* 62.5M */
        }
        ltq_cgu_w32(val, ifccr);
        pmu_enable(clk);
        return 0;
}

/* enable the external clock as a source */
static int pci_ext_enable(struct clk *clk)
{
        ltq_cgu_w32(ltq_cgu_r32(ifccr) & ~(1 << 16), ifccr);
        ltq_cgu_w32((1 << 30), pcicr);
        return 0;
}

/* disable the external clock as a source */
static void pci_ext_disable(struct clk *clk)
{
        ltq_cgu_w32(ltq_cgu_r32(ifccr) | (1 << 16), ifccr);
        ltq_cgu_w32((1 << 31) | (1 << 30), pcicr);
}

/* enable a clockout source */
static int clkout_enable(struct clk *clk)
{
        int i;

        /* get the correct rate */
        for (i = 0; i < 4; i++) {
                if (clk->rates[i] == clk->rate) {
                        int shift = 14 - (2 * clk->module);
                        int enable = 7 - clk->module;
                        unsigned int val = ltq_cgu_r32(ifccr);

                        val &= ~(3 << shift);
                        val |= i << shift;
                        val |= enable;
                        ltq_cgu_w32(val, ifccr);
                        return 0;
                }
        }
        return -1;
}

/* manage the clock gates via PMU */
static void clkdev_add_pmu(const char *dev, const char *con, bool deactivate,
                           unsigned int module, unsigned int bits)
{
        struct clk *clk = kzalloc_obj(struct clk);

        if (!clk)
                return;
        clk->cl.dev_id = dev;
        clk->cl.con_id = con;
        clk->cl.clk = clk;
        clk->enable = pmu_enable;
        clk->disable = pmu_disable;
        clk->module = module;
        clk->bits = bits;
        if (deactivate) {
                /*
                 * Disable it during the initialization. Module should enable
                 * when used
                 */
                pmu_disable(clk);
        }
        clkdev_add(&clk->cl);
}

/* manage the clock generator */
static void clkdev_add_cgu(const char *dev, const char *con,
                                        unsigned int bits)
{
        struct clk *clk = kzalloc_obj(struct clk);

        if (!clk)
                return;
        clk->cl.dev_id = dev;
        clk->cl.con_id = con;
        clk->cl.clk = clk;
        clk->enable = cgu_enable;
        clk->disable = cgu_disable;
        clk->bits = bits;
        clkdev_add(&clk->cl);
}

/* pci needs its own enable function as the setup is a bit more complex */
static unsigned long valid_pci_rates[] = {CLOCK_33M, CLOCK_62_5M, 0};

static void clkdev_add_pci(void)
{
        struct clk *clk = kzalloc_obj(struct clk);
        struct clk *clk_ext = kzalloc_obj(struct clk);

        /* main pci clock */
        if (clk) {
                clk->cl.dev_id = "17000000.pci";
                clk->cl.con_id = NULL;
                clk->cl.clk = clk;
                clk->rate = CLOCK_33M;
                clk->rates = valid_pci_rates;
                clk->enable = pci_enable;
                clk->disable = pmu_disable;
                clk->module = 0;
                clk->bits = PMU_PCI;
                clkdev_add(&clk->cl);
        }

        /* use internal/external bus clock */
        if (clk_ext) {
                clk_ext->cl.dev_id = "17000000.pci";
                clk_ext->cl.con_id = "external";
                clk_ext->cl.clk = clk_ext;
                clk_ext->enable = pci_ext_enable;
                clk_ext->disable = pci_ext_disable;
                clkdev_add(&clk_ext->cl);
        }
}

/* xway socs can generate clocks on gpio pins */
static unsigned long valid_clkout_rates[4][5] = {
        {CLOCK_32_768K, CLOCK_1_536M, CLOCK_2_5M, CLOCK_12M, 0},
        {CLOCK_40M, CLOCK_12M, CLOCK_24M, CLOCK_48M, 0},
        {CLOCK_25M, CLOCK_40M, CLOCK_30M, CLOCK_60M, 0},
        {CLOCK_12M, CLOCK_50M, CLOCK_32_768K, CLOCK_25M, 0},
};

static void clkdev_add_clkout(void)
{
        int i;

        for (i = 0; i < 4; i++) {
                struct clk *clk;
                char *name;

                name = kzalloc(sizeof("clkout0"), GFP_KERNEL);
                if (!name)
                        continue;
                sprintf(name, "clkout%d", i);

                clk = kzalloc_obj(struct clk);
                if (!clk) {
                        kfree(name);
                        continue;
                }
                clk->cl.dev_id = "1f103000.cgu";
                clk->cl.con_id = name;
                clk->cl.clk = clk;
                clk->rate = 0;
                clk->rates = valid_clkout_rates[i];
                clk->enable = clkout_enable;
                clk->module = i;
                clkdev_add(&clk->cl);
        }
}

/* bring up all register ranges that we need for basic system control */
void __init ltq_soc_init(void)
{
        struct resource res_pmu, res_cgu, res_ebu;
        struct device_node *np_pmu =
                        of_find_compatible_node(NULL, NULL, "lantiq,pmu-xway");
        struct device_node *np_cgu =
                        of_find_compatible_node(NULL, NULL, "lantiq,cgu-xway");
        struct device_node *np_ebu =
                        of_find_compatible_node(NULL, NULL, "lantiq,ebu-xway");

        /* check if all the core register ranges are available */
        if (!np_pmu || !np_cgu || !np_ebu)
                panic("Failed to load core nodes from devicetree");

        if (of_address_to_resource(np_pmu, 0, &res_pmu) ||
                        of_address_to_resource(np_cgu, 0, &res_cgu) ||
                        of_address_to_resource(np_ebu, 0, &res_ebu))
                panic("Failed to get core resources");

        of_node_put(np_pmu);
        of_node_put(np_cgu);
        of_node_put(np_ebu);

        if (!request_mem_region(res_pmu.start, resource_size(&res_pmu),
                                res_pmu.name) ||
                !request_mem_region(res_cgu.start, resource_size(&res_cgu),
                                res_cgu.name) ||
                !request_mem_region(res_ebu.start, resource_size(&res_ebu),
                                res_ebu.name))
                pr_err("Failed to request core resources");

        pmu_membase = ioremap(res_pmu.start, resource_size(&res_pmu));
        ltq_cgu_membase = ioremap(res_cgu.start,
                                                resource_size(&res_cgu));
        ltq_ebu_membase = ioremap(res_ebu.start,
                                                resource_size(&res_ebu));
        if (!pmu_membase || !ltq_cgu_membase || !ltq_ebu_membase)
                panic("Failed to remap core resources");

        /* make sure to unprotect the memory region where flash is located */
        ltq_ebu_w32(ltq_ebu_r32(LTQ_EBU_BUSCON0) & ~EBU_WRDIS, LTQ_EBU_BUSCON0);

        /* add our generic xway clocks */
        clkdev_add_pmu("10000000.fpi", NULL, 0, 0, PMU_FPI);
        clkdev_add_pmu("1e100a00.gptu", NULL, 1, 0, PMU_GPT);
        clkdev_add_pmu("1e100bb0.gpio", NULL, 1, 0, PMU_STP);
        clkdev_add_pmu("1e100c00.serial", NULL, 0, 0, PMU_ASC1);
        clkdev_add_pmu("1e104100.dma", NULL, 1, 0, PMU_DMA);
        clkdev_add_pmu("1e100800.spi", NULL, 1, 0, PMU_SPI);
        clkdev_add_pmu("1e105300.ebu", NULL, 0, 0, PMU_EBU);
        clkdev_add_clkout();

        /* add the soc dependent clocks */
        if (of_machine_is_compatible("lantiq,vr9")) {
                ifccr = CGU_IFCCR_VR9;
                pcicr = CGU_PCICR_VR9;
        } else {
                clkdev_add_pmu("1e180000.ethernet", NULL, 1, 0, PMU_PPE);
        }

        if (!of_machine_is_compatible("lantiq,ase"))
                clkdev_add_pci();

        if (of_machine_is_compatible("lantiq,grx390") ||
            of_machine_is_compatible("lantiq,ar10")) {
                clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY0);
                clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY1);
                clkdev_add_pmu("1e108000.switch", "gphy2", 0, 0, PMU_GPHY2);
                clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB0_P);
                clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 2, PMU_ANALOG_USB1_P);
                /* rc 0 */
                clkdev_add_pmu("1f106800.phy", "phy", 1, 2, PMU_ANALOG_PCIE0_P);
                clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI);
                clkdev_add_pmu("1f106800.phy", "pdi", 1, 1, PMU1_PCIE_PDI);
                clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL);
                /* rc 1 */
                clkdev_add_pmu("1f700400.phy", "phy", 1, 2, PMU_ANALOG_PCIE1_P);
                clkdev_add_pmu("19000000.pcie", "msi", 1, 1, PMU1_PCIE1_MSI);
                clkdev_add_pmu("1f700400.phy", "pdi", 1, 1, PMU1_PCIE1_PDI);
                clkdev_add_pmu("19000000.pcie", "ctl", 1, 1, PMU1_PCIE1_CTL);
        }

        if (of_machine_is_compatible("lantiq,ase")) {
                if (ltq_cgu_r32(CGU_SYS) & (1 << 5))
                        clkdev_add_static(CLOCK_266M, CLOCK_133M,
                                                CLOCK_133M, CLOCK_266M);
                else
                        clkdev_add_static(CLOCK_133M, CLOCK_133M,
                                                CLOCK_133M, CLOCK_133M);
                clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
                clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P);
                clkdev_add_pmu("1e180000.ethernet", "ppe", 1, 0, PMU_PPE);
                clkdev_add_cgu("1e180000.ethernet", "ephycgu", CGU_EPHY);
                clkdev_add_pmu("1e180000.ethernet", "ephy", 1, 0, PMU_EPHY);
                clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_ASE_SDIO);
                clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
        } else if (of_machine_is_compatible("lantiq,grx390")) {
                clkdev_add_static(ltq_grx390_cpu_hz(), ltq_grx390_fpi_hz(),
                                  ltq_grx390_fpi_hz(), ltq_grx390_pp32_hz());
                clkdev_add_pmu("1e108000.switch", "gphy3", 0, 0, PMU_GPHY3);
                clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
                clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1);
                /* rc 2 */
                clkdev_add_pmu("1f106a00.pcie", "phy", 1, 2, PMU_ANALOG_PCIE2_P);
                clkdev_add_pmu("1a800000.pcie", "msi", 1, 1, PMU1_PCIE2_MSI);
                clkdev_add_pmu("1f106a00.pcie", "pdi", 1, 1, PMU1_PCIE2_PDI);
                clkdev_add_pmu("1a800000.pcie", "ctl", 1, 1, PMU1_PCIE2_CTL);
                clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH | PMU_PPE_DP);
                clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
                clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
        } else if (of_machine_is_compatible("lantiq,ar10")) {
                clkdev_add_static(ltq_ar10_cpu_hz(), ltq_ar10_fpi_hz(),
                                  ltq_ar10_fpi_hz(), ltq_ar10_pp32_hz());
                clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
                clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1);
                clkdev_add_pmu("1e10b308.eth", NULL, 0, 0, PMU_SWITCH |
                               PMU_PPE_DP | PMU_PPE_TC);
                clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
                clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
                clkdev_add_pmu("1e116000.mei", "afe", 1, 2, PMU_ANALOG_DSL_AFE);
                clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
        } else if (of_machine_is_compatible("lantiq,vr9")) {
                clkdev_add_static(ltq_vr9_cpu_hz(), ltq_vr9_fpi_hz(),
                                ltq_vr9_fpi_hz(), ltq_vr9_pp32_hz());
                clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P);
                clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM);
                clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 0, PMU_USB1_P);
                clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1 | PMU_AHBM);
                clkdev_add_pmu("1f106800.phy", "phy", 1, 1, PMU1_PCIE_PHY);
                clkdev_add_pmu("1d900000.pcie", "bus", 1, 0, PMU_PCIE_CLK);
                clkdev_add_pmu("1d900000.pcie", "msi", 1, 1, PMU1_PCIE_MSI);
                clkdev_add_pmu("1f106800.phy", "pdi", 1, 1, PMU1_PCIE_PDI);
                clkdev_add_pmu("1d900000.pcie", "ctl", 1, 1, PMU1_PCIE_CTL);
                clkdev_add_pmu(NULL, "ahb", 1, 0, PMU_AHBM | PMU_AHBS);

                clkdev_add_pmu("1da00000.usif", "NULL", 1, 0, PMU_USIF);
                clkdev_add_pmu("1e10b308.eth", NULL, 0, 0,
                                PMU_SWITCH | PMU_PPE_DPLUS | PMU_PPE_DPLUM |
                                PMU_PPE_EMA | PMU_PPE_TC | PMU_PPE_SLL01 |
                                PMU_PPE_QSB | PMU_PPE_TOP);
                clkdev_add_pmu("1e108000.switch", "gphy0", 0, 0, PMU_GPHY);
                clkdev_add_pmu("1e108000.switch", "gphy1", 0, 0, PMU_GPHY);
                clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
                clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
                clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
        } else if (of_machine_is_compatible("lantiq,ar9")) {
                clkdev_add_static(ltq_ar9_cpu_hz(), ltq_ar9_fpi_hz(),
                                ltq_ar9_fpi_hz(), CLOCK_250M);
                clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P);
                clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM);
                clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 0, PMU_USB1_P);
                clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1 | PMU_AHBM);
                clkdev_add_pmu("1e180000.ethernet", "switch", 1, 0, PMU_SWITCH);
                clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
                clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
                clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
                clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
        } else {
                clkdev_add_static(ltq_danube_cpu_hz(), ltq_danube_fpi_hz(),
                                ltq_danube_fpi_hz(), ltq_danube_pp32_hz());
                clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM);
                clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P);
                clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
                clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
                clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
                clkdev_add_pmu("1e100400.serial", NULL, 1, 0, PMU_ASC0);
        }
        usb_set_clock();
}