// SPDX-License-Identifier: GPL-2.0-only
/*
 * Suspend/resume support. Currently supporting Armada XP only.
 *
 * Copyright (C) 2014 Marvell
 *
 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
 */

#include <linux/cpu_pm.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mbus.h>
#include <linux/of_address.h>
#include <linux/suspend.h>
#include <asm/cacheflush.h>
#include <asm/outercache.h>
#include <asm/suspend.h>

#include "coherency.h"
#include "common.h"
#include "pmsu.h"

#define SDRAM_CONFIG_OFFS                  0x0
#define  SDRAM_CONFIG_SR_MODE_BIT          BIT(24)
#define SDRAM_OPERATION_OFFS               0x18
#define  SDRAM_OPERATION_SELF_REFRESH      0x7
#define SDRAM_DLB_EVICTION_OFFS            0x30c
#define  SDRAM_DLB_EVICTION_THRESHOLD_MASK 0xff

static void (*mvebu_board_pm_enter)(void __iomem *sdram_reg, u32 srcmd);
static void __iomem *sdram_ctrl;

static int mvebu_pm_powerdown(unsigned long data)
{
        u32 reg, srcmd;

        flush_cache_all();
        outer_flush_all();

        /*
         * Issue a Data Synchronization Barrier instruction to ensure
         * that all state saving has been completed.
         */
        dsb();

        /* Flush the DLB and wait ~7 usec */
        reg = readl(sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
        reg &= ~SDRAM_DLB_EVICTION_THRESHOLD_MASK;
        writel(reg, sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);

        udelay(7);

        /* Set DRAM in battery backup mode */
        reg = readl(sdram_ctrl + SDRAM_CONFIG_OFFS);
        reg &= ~SDRAM_CONFIG_SR_MODE_BIT;
        writel(reg, sdram_ctrl + SDRAM_CONFIG_OFFS);

        /* Prepare to go to self-refresh */

        srcmd = readl(sdram_ctrl + SDRAM_OPERATION_OFFS);
        srcmd &= ~0x1F;
        srcmd |= SDRAM_OPERATION_SELF_REFRESH;

        mvebu_board_pm_enter(sdram_ctrl + SDRAM_OPERATION_OFFS, srcmd);

        return 0;
}

#define BOOT_INFO_ADDR      0x3000
#define BOOT_MAGIC_WORD     0xdeadb002
#define BOOT_MAGIC_LIST_END 0xffffffff

/*
 * Those registers are accessed before switching the internal register
 * base, which is why we hardcode the 0xd0000000 base address, the one
 * used by the SoC out of reset.
 */
#define MBUS_WINDOW_12_CTRL       0xd00200b0
#define MBUS_INTERNAL_REG_ADDRESS 0xd0020080

#define SDRAM_WIN_BASE_REG(x)   (0x20180 + (0x8*x))
#define SDRAM_WIN_CTRL_REG(x)   (0x20184 + (0x8*x))

static phys_addr_t mvebu_internal_reg_base(void)
{
        struct device_node *np;
        __be32 in_addr[2];

        np = of_find_node_by_name(NULL, "internal-regs");
        BUG_ON(!np);

        /*
         * Ask the DT what is the internal register address on this
         * platform. In the mvebu-mbus DT binding, 0xf0010000
         * corresponds to the internal register window.
         */
        in_addr[0] = cpu_to_be32(0xf0010000);
        in_addr[1] = 0x0;

        return of_translate_address(np, in_addr);
}

static void mvebu_pm_store_armadaxp_bootinfo(u32 *store_addr)
{
        phys_addr_t resume_pc;

        resume_pc = __pa_symbol(armada_370_xp_cpu_resume);

        /*
         * The bootloader expects the first two words to be a magic
         * value (BOOT_MAGIC_WORD), followed by the address of the
         * resume code to jump to. Then, it expects a sequence of
         * (address, value) pairs, which can be used to restore the
         * value of certain registers. This sequence must end with the
         * BOOT_MAGIC_LIST_END magic value.
         */

        writel(BOOT_MAGIC_WORD, store_addr++);
        writel(resume_pc, store_addr++);

        /*
         * Some platforms remap their internal register base address
         * to 0xf1000000. However, out of reset, window 12 starts at
         * 0xf0000000 and ends at 0xf7ffffff, which would overlap with
         * the internal registers. Therefore, disable window 12.
         */
        writel(MBUS_WINDOW_12_CTRL, store_addr++);
        writel(0x0, store_addr++);

        /*
         * Set the internal register base address to the value
         * expected by Linux, as read from the Device Tree.
         */
        writel(MBUS_INTERNAL_REG_ADDRESS, store_addr++);
        writel(mvebu_internal_reg_base(), store_addr++);

        /*
         * Ask the mvebu-mbus driver to store the SDRAM window
         * configuration, which has to be restored by the bootloader
         * before re-entering the kernel on resume.
         */
        store_addr += mvebu_mbus_save_cpu_target(store_addr);

        writel(BOOT_MAGIC_LIST_END, store_addr);
}

static int mvebu_pm_store_bootinfo(void)
{
        u32 *store_addr;

        store_addr = phys_to_virt(BOOT_INFO_ADDR);

        if (of_machine_is_compatible("marvell,armadaxp"))
                mvebu_pm_store_armadaxp_bootinfo(store_addr);
        else
                return -ENODEV;

        return 0;
}

static int mvebu_enter_suspend(void)
{
        int ret;

        ret = mvebu_pm_store_bootinfo();
        if (ret)
                return ret;

        cpu_pm_enter();

        cpu_suspend(0, mvebu_pm_powerdown);

        outer_resume();

        mvebu_v7_pmsu_idle_exit();

        set_cpu_coherent();

        cpu_pm_exit();
        return 0;
}

static int mvebu_pm_enter(suspend_state_t state)
{
        switch (state) {
        case PM_SUSPEND_STANDBY:
                cpu_do_idle();
                break;
        case PM_SUSPEND_MEM:
                pr_warn("Entering suspend to RAM. Only special wake-up sources will resume the system\n");
                return mvebu_enter_suspend();
        default:
                return -EINVAL;
        }
        return 0;
}

static int mvebu_pm_valid(suspend_state_t state)
{
        if (state == PM_SUSPEND_STANDBY)
                return 1;

        if (state == PM_SUSPEND_MEM && mvebu_board_pm_enter != NULL)
                return 1;

        return 0;
}

static const struct platform_suspend_ops mvebu_pm_ops = {
        .enter = mvebu_pm_enter,
        .valid = mvebu_pm_valid,
};

static int __init mvebu_pm_init(void)
{
        if (!of_machine_is_compatible("marvell,armadaxp") &&
            !of_machine_is_compatible("marvell,armada370") &&
            !of_machine_is_compatible("marvell,armada380") &&
            !of_machine_is_compatible("marvell,armada390"))
                return -ENODEV;

        suspend_set_ops(&mvebu_pm_ops);

        return 0;
}


late_initcall(mvebu_pm_init);

int __init mvebu_pm_suspend_init(void (*board_pm_enter)(void __iomem *sdram_reg,
                                                        u32 srcmd))
{
        struct device_node *np;
        struct resource res;

        np = of_find_compatible_node(NULL, NULL,
                                     "marvell,armada-xp-sdram-controller");
        if (!np)
                return -ENODEV;

        if (of_address_to_resource(np, 0, &res)) {
                of_node_put(np);
                return -ENODEV;
        }

        if (!request_mem_region(res.start, resource_size(&res),
                                np->full_name)) {
                of_node_put(np);
                return -EBUSY;
        }

        sdram_ctrl = ioremap(res.start, resource_size(&res));
        if (!sdram_ctrl) {
                release_mem_region(res.start, resource_size(&res));
                of_node_put(np);
                return -ENOMEM;
        }

        of_node_put(np);

        mvebu_board_pm_enter = board_pm_enter;

        return 0;
}