/* SPDX-License-Identifier: GPL-2.0 */ #ifndef LINUX_B43_PHY_COMMON_H_ #define LINUX_B43_PHY_COMMON_H_ #include <linux/types.h> #include <linux/nl80211.h> struct b43_wldev; /* PHY register routing bits */ #define B43_PHYROUTE 0x0C00 /* PHY register routing bits mask */ #define B43_PHYROUTE_BASE 0x0000 /* Base registers */ #define B43_PHYROUTE_OFDM_GPHY 0x0400 /* OFDM register routing for G-PHYs */ #define B43_PHYROUTE_EXT_GPHY 0x0800 /* Extended G-PHY registers */ #define B43_PHYROUTE_N_BMODE 0x0C00 /* N-PHY BMODE registers */ /* CCK (B-PHY) registers. */ #define B43_PHY_CCK(reg) ((reg) | B43_PHYROUTE_BASE) /* N-PHY registers. */ #define B43_PHY_N(reg) ((reg) | B43_PHYROUTE_BASE) /* N-PHY BMODE registers. */ #define B43_PHY_N_BMODE(reg) ((reg) | B43_PHYROUTE_N_BMODE) /* OFDM (A-PHY) registers. */ #define B43_PHY_OFDM(reg) ((reg) | B43_PHYROUTE_OFDM_GPHY) /* Extended G-PHY registers. */ #define B43_PHY_EXTG(reg) ((reg) | B43_PHYROUTE_EXT_GPHY) /* Masks for the PHY versioning registers. */ #define B43_PHYVER_ANALOG 0xF000 #define B43_PHYVER_ANALOG_SHIFT 12 #define B43_PHYVER_TYPE 0x0F00 #define B43_PHYVER_TYPE_SHIFT 8 #define B43_PHYVER_VERSION 0x00FF /* PHY writes need to be flushed if we reach limit */ #define B43_MAX_WRITES_IN_ROW 24 /** * enum b43_interference_mitigation - Interference Mitigation mode * * @B43_INTERFMODE_NONE: Disabled * @B43_INTERFMODE_NONWLAN: Non-WLAN Interference Mitigation * @B43_INTERFMODE_MANUALWLAN: WLAN Interference Mitigation * @B43_INTERFMODE_AUTOWLAN: Automatic WLAN Interference Mitigation */ enum b43_interference_mitigation { B43_INTERFMODE_NONE, B43_INTERFMODE_NONWLAN, B43_INTERFMODE_MANUALWLAN, B43_INTERFMODE_AUTOWLAN, }; /* Antenna identifiers */ enum { B43_ANTENNA0 = 0, /* Antenna 0 */ B43_ANTENNA1 = 1, /* Antenna 1 */ B43_ANTENNA_AUTO0 = 2, /* Automatic, starting with antenna 0 */ B43_ANTENNA_AUTO1 = 3, /* Automatic, starting with antenna 1 */ B43_ANTENNA2 = 4, B43_ANTENNA3 = 8, B43_ANTENNA_AUTO = B43_ANTENNA_AUTO0, B43_ANTENNA_DEFAULT = B43_ANTENNA_AUTO, }; /** * enum b43_txpwr_result - Return value for the recalc_txpower PHY op. * * @B43_TXPWR_RES_NEED_ADJUST: Values changed. Hardware adjustment is needed. * @B43_TXPWR_RES_DONE: No more work to do. Everything is done. */ enum b43_txpwr_result { B43_TXPWR_RES_NEED_ADJUST, B43_TXPWR_RES_DONE, }; /** * struct b43_phy_operations - Function pointers for PHY ops. * * @allocate: Allocate and initialise the PHY data structures. * Must not be NULL. * @free: Destroy and free the PHY data structures. * Must not be NULL. * * @prepare_structs: Prepare the PHY data structures. * The data structures allocated in @allocate are * initialized here. * Must not be NULL. * @prepare_hardware: Prepare the PHY. This is called before b43_chip_init to * do some early PHY hardware init. * Can be NULL, if not required. * @init: Initialize the PHY. * Must not be NULL. * @exit: Shutdown the PHY. * Can be NULL, if not required. * * @phy_read: Read from a PHY register. * Must not be NULL. * @phy_write: Write to a PHY register. * Must not be NULL. * @phy_maskset: Maskset a PHY register, taking shortcuts. * If it is NULL, a generic algorithm is used. * @radio_read: Read from a Radio register. * Must not be NULL. * @radio_write: Write to a Radio register. * Must not be NULL. * * @supports_hwpctl: Returns a boolean whether Hardware Power Control * is supported or not. * If NULL, hwpctl is assumed to be never supported. * @software_rfkill: Turn the radio ON or OFF. * Possible state values are * RFKILL_STATE_SOFT_BLOCKED or * RFKILL_STATE_UNBLOCKED * Must not be NULL. * @switch_analog: Turn the Analog on/off. * Must not be NULL. * @switch_channel: Switch the radio to another channel. * Must not be NULL. * @get_default_chan: Just returns the default channel number. * Must not be NULL. * @set_rx_antenna: Set the antenna used for RX. * Can be NULL, if not supported. * @interf_mitigation: Switch the Interference Mitigation mode. * Can be NULL, if not supported. * * @recalc_txpower: Recalculate the transmission power parameters. * This callback has to recalculate the TX power settings, * but does not need to write them to the hardware, yet. * Returns enum b43_txpwr_result to indicate whether the hardware * needs to be adjusted. * If B43_TXPWR_NEED_ADJUST is returned, @adjust_txpower * will be called later. * If the parameter "ignore_tssi" is true, the TSSI values should * be ignored and a recalculation of the power settings should be * done even if the TSSI values did not change. * This function may sleep, but should not. * Must not be NULL. * @adjust_txpower: Write the previously calculated TX power settings * (from @recalc_txpower) to the hardware. * This function may sleep. * Can be NULL, if (and ONLY if) @recalc_txpower _always_ * returns B43_TXPWR_RES_DONE. * * @pwork_15sec: Periodic work. Called every 15 seconds. * Can be NULL, if not required. * @pwork_60sec: Periodic work. Called every 60 seconds. * Can be NULL, if not required. */ struct b43_phy_operations { /* Initialisation */ int (*allocate)(struct b43_wldev *dev); void (*free)(struct b43_wldev *dev); void (*prepare_structs)(struct b43_wldev *dev); int (*prepare_hardware)(struct b43_wldev *dev); int (*init)(struct b43_wldev *dev); void (*exit)(struct b43_wldev *dev); /* Register access */ u16 (*phy_read)(struct b43_wldev *dev, u16 reg); void (*phy_write)(struct b43_wldev *dev, u16 reg, u16 value); void (*phy_maskset)(struct b43_wldev *dev, u16 reg, u16 mask, u16 set); u16 (*radio_read)(struct b43_wldev *dev, u16 reg); void (*radio_write)(struct b43_wldev *dev, u16 reg, u16 value); /* Radio */ bool (*supports_hwpctl)(struct b43_wldev *dev); void (*software_rfkill)(struct b43_wldev *dev, bool blocked); void (*switch_analog)(struct b43_wldev *dev, bool on); int (*switch_channel)(struct b43_wldev *dev, unsigned int new_channel); unsigned int (*get_default_chan)(struct b43_wldev *dev); void (*set_rx_antenna)(struct b43_wldev *dev, int antenna); int (*interf_mitigation)(struct b43_wldev *dev, enum b43_interference_mitigation new_mode); /* Transmission power adjustment */ enum b43_txpwr_result (*recalc_txpower)(struct b43_wldev *dev, bool ignore_tssi); void (*adjust_txpower)(struct b43_wldev *dev); /* Misc */ void (*pwork_15sec)(struct b43_wldev *dev); void (*pwork_60sec)(struct b43_wldev *dev); }; struct b43_phy_g; struct b43_phy_n; struct b43_phy_lp; struct b43_phy_ht; struct b43_phy_lcn; struct b43_phy { /* Hardware operation callbacks. */ const struct b43_phy_operations *ops; /* Most hardware context information is stored in the standard- * specific data structures pointed to by the pointers below. * Only one of them is valid (the currently enabled PHY). */ #ifdef CONFIG_B43_DEBUG /* No union for debug build to force NULL derefs in buggy code. */ struct { #else union { #endif /* G-PHY specific information */ struct b43_phy_g *g; /* N-PHY specific information */ struct b43_phy_n *n; /* LP-PHY specific information */ struct b43_phy_lp *lp; /* HT-PHY specific information */ struct b43_phy_ht *ht; /* LCN-PHY specific information */ struct b43_phy_lcn *lcn; /* AC-PHY specific information */ struct b43_phy_ac *ac; }; /* Band support flags. */ bool supports_2ghz; bool supports_5ghz; /* Is GMODE (2 GHz mode) bit enabled? */ bool gmode; /* After power reset full init has to be performed */ bool do_full_init; /* Analog Type */ u8 analog; /* B43_PHYTYPE_ */ u8 type; /* PHY revision number. */ u8 rev; /* Count writes since last read */ u8 writes_counter; /* Radio versioning */ u16 radio_manuf; /* Radio manufacturer */ u16 radio_ver; /* Radio version */ u8 radio_rev; /* Radio revision */ /* Software state of the radio */ bool radio_on; /* Desired TX power level (in dBm). * This is set by the user and adjusted in b43_phy_xmitpower(). */ int desired_txpower; /* Hardware Power Control enabled? */ bool hardware_power_control; /* The time (in absolute jiffies) when the next TX power output * check is needed. */ unsigned long next_txpwr_check_time; /* Current channel */ struct cfg80211_chan_def *chandef; unsigned int channel; /* PHY TX errors counter. */ atomic_t txerr_cnt; #ifdef CONFIG_B43_DEBUG /* PHY registers locked (w.r.t. firmware) */ bool phy_locked; /* Radio registers locked (w.r.t. firmware) */ bool radio_locked; #endif /* B43_DEBUG */ }; /** * b43_phy_allocate - Allocate PHY structs * Allocate the PHY data structures, based on the current dev->phy.type */ int b43_phy_allocate(struct b43_wldev *dev); /** * b43_phy_free - Free PHY structs */ void b43_phy_free(struct b43_wldev *dev); /** * b43_phy_init - Initialise the PHY */ int b43_phy_init(struct b43_wldev *dev); /** * b43_phy_exit - Cleanup PHY */ void b43_phy_exit(struct b43_wldev *dev); /** * b43_has_hardware_pctl - Hardware Power Control supported? * Returns a boolean, whether hardware power control is supported. */ bool b43_has_hardware_pctl(struct b43_wldev *dev); /** * b43_phy_read - 16bit PHY register read access */ u16 b43_phy_read(struct b43_wldev *dev, u16 reg); /** * b43_phy_write - 16bit PHY register write access */ void b43_phy_write(struct b43_wldev *dev, u16 reg, u16 value); /** * b43_phy_copy - copy contents of 16bit PHY register to another */ void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg); /** * b43_phy_mask - Mask a PHY register with a mask */ void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask); /** * b43_phy_set - OR a PHY register with a bitmap */ void b43_phy_set(struct b43_wldev *dev, u16 offset, u16 set); /** * b43_phy_maskset - Mask and OR a PHY register with a mask and bitmap */ void b43_phy_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); /** * b43_radio_read - 16bit Radio register read access */ u16 b43_radio_read(struct b43_wldev *dev, u16 reg); #define b43_radio_read16 b43_radio_read /* DEPRECATED */ /** * b43_radio_write - 16bit Radio register write access */ void b43_radio_write(struct b43_wldev *dev, u16 reg, u16 value); #define b43_radio_write16 b43_radio_write /* DEPRECATED */ /** * b43_radio_mask - Mask a 16bit radio register with a mask */ void b43_radio_mask(struct b43_wldev *dev, u16 offset, u16 mask); /** * b43_radio_set - OR a 16bit radio register with a bitmap */ void b43_radio_set(struct b43_wldev *dev, u16 offset, u16 set); /** * b43_radio_maskset - Mask and OR a radio register with a mask and bitmap */ void b43_radio_maskset(struct b43_wldev *dev, u16 offset, u16 mask, u16 set); /** * b43_radio_wait_value - Waits for a given value in masked register read */ bool b43_radio_wait_value(struct b43_wldev *dev, u16 offset, u16 mask, u16 value, int delay, int timeout); /** * b43_radio_lock - Lock firmware radio register access */ void b43_radio_lock(struct b43_wldev *dev); /** * b43_radio_unlock - Unlock firmware radio register access */ void b43_radio_unlock(struct b43_wldev *dev); /** * b43_phy_lock - Lock firmware PHY register access */ void b43_phy_lock(struct b43_wldev *dev); /** * b43_phy_unlock - Unlock firmware PHY register access */ void b43_phy_unlock(struct b43_wldev *dev); void b43_phy_put_into_reset(struct b43_wldev *dev); void b43_phy_take_out_of_reset(struct b43_wldev *dev); /** * b43_switch_channel - Switch to another channel */ int b43_switch_channel(struct b43_wldev *dev, unsigned int new_channel); /** * b43_software_rfkill - Turn the radio ON or OFF in software. */ void b43_software_rfkill(struct b43_wldev *dev, bool blocked); /** * b43_phy_txpower_check - Check TX power output. * * Compare the current TX power output to the desired power emission * and schedule an adjustment in case it mismatches. * * @flags: OR'ed enum b43_phy_txpower_check_flags flags. * See the docs below. */ void b43_phy_txpower_check(struct b43_wldev *dev, unsigned int flags); /** * enum b43_phy_txpower_check_flags - Flags for b43_phy_txpower_check() * * @B43_TXPWR_IGNORE_TIME: Ignore the schedule time and force-redo * the check now. * @B43_TXPWR_IGNORE_TSSI: Redo the recalculation, even if the average * TSSI did not change. */ enum b43_phy_txpower_check_flags { B43_TXPWR_IGNORE_TIME = (1 << 0), B43_TXPWR_IGNORE_TSSI = (1 << 1), }; struct work_struct; void b43_phy_txpower_adjust_work(struct work_struct *work); /** * b43_phy_shm_tssi_read - Read the average of the last 4 TSSI from SHM. * * @shm_offset: The SHM address to read the values from. * * Returns the average of the 4 TSSI values, or a negative error code. */ int b43_phy_shm_tssi_read(struct b43_wldev *dev, u16 shm_offset); /** * b43_phy_switch_analog_generic - Generic PHY operation for switching the Analog. * * It does the switching based on the PHY0 core register. * Do _not_ call this directly. Only use it as a switch_analog callback * for struct b43_phy_operations. */ void b43_phyop_switch_analog_generic(struct b43_wldev *dev, bool on); bool b43_is_40mhz(struct b43_wldev *dev); void b43_phy_force_clock(struct b43_wldev *dev, bool force); #endif /* LINUX_B43_PHY_COMMON_H_ */
