// SPDX-License-Identifier: GPL-2.0-or-later
/*
 *  boot.c - Architecture-Specific Low-Level ACPI Boot Support
 *
 *  Copyright (C) 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
 *  Copyright (C) 2001 Jun Nakajima <jun.nakajima@intel.com>
 */
#define pr_fmt(fmt) "ACPI: " fmt

#include <linux/init.h>
#include <linux/acpi.h>
#include <linux/acpi_pmtmr.h>
#include <linux/efi.h>
#include <linux/cpumask.h>
#include <linux/export.h>
#include <linux/dmi.h>
#include <linux/irq.h>
#include <linux/slab.h>
#include <linux/memblock.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/efi-bgrt.h>
#include <linux/serial_core.h>
#include <linux/pgtable.h>

#include <xen/xen.h>

#include <asm/e820/api.h>
#include <asm/irqdomain.h>
#include <asm/pci_x86.h>
#include <asm/io_apic.h>
#include <asm/apic.h>
#include <asm/io.h>
#include <asm/mpspec.h>
#include <asm/smp.h>
#include <asm/i8259.h>
#include <asm/setup.h>
#include <asm/hypervisor.h>

#include "sleep.h" /* To include x86_acpi_suspend_lowlevel */
static int __initdata acpi_force = 0;
int acpi_disabled;
EXPORT_SYMBOL(acpi_disabled);

#ifdef  CONFIG_X86_64
# include <asm/proto.h>
#endif                          /* X86 */

int acpi_noirq;                         /* skip ACPI IRQ initialization */
static int acpi_nobgrt;                 /* skip ACPI BGRT */
static int acpi_spcr_add __initdata;    /* add SPCR-provided console */
int acpi_pci_disabled;                  /* skip ACPI PCI scan and IRQ initialization */
EXPORT_SYMBOL(acpi_pci_disabled);

int acpi_lapic;
int acpi_ioapic;
int acpi_strict;
int acpi_disable_cmcff;
bool acpi_int_src_ovr[NR_IRQS_LEGACY];

/* ACPI SCI override configuration */
u8 acpi_sci_flags __initdata;
u32 acpi_sci_override_gsi __initdata = INVALID_ACPI_IRQ;
int acpi_skip_timer_override __initdata;
int acpi_use_timer_override __initdata;
int acpi_fix_pin2_polarity __initdata;

#ifdef CONFIG_X86_LOCAL_APIC
static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE;
static bool has_lapic_cpus __initdata;
static bool acpi_support_online_capable;
#endif

#ifdef CONFIG_X86_IO_APIC
/*
 * Locks related to IOAPIC hotplug
 * Hotplug side:
 *      ->device_hotplug_lock
 *              ->acpi_ioapic_lock
 *                      ->ioapic_lock
 * Interrupt mapping side:
 *      ->acpi_ioapic_lock
 *              ->ioapic_mutex
 *                      ->ioapic_lock
 */
static DEFINE_MUTEX(acpi_ioapic_lock);
#endif

/* --------------------------------------------------------------------------
                              Boot-time Configuration
   -------------------------------------------------------------------------- */

/*
 * The default interrupt routing model is PIC (8259).  This gets
 * overridden if IOAPICs are enumerated (below).
 */
enum acpi_irq_model_id acpi_irq_model = ACPI_IRQ_MODEL_PIC;


/*
 * ISA irqs by default are the first 16 gsis but can be
 * any gsi as specified by an interrupt source override.
 */
static u32 isa_irq_to_gsi[NR_IRQS_LEGACY] __read_mostly = {
        0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15
};

/*
 * This is just a simple wrapper around early_memremap(),
 * with sanity checks for phys == 0 and size == 0.
 */
void __init __iomem *__acpi_map_table(unsigned long phys, unsigned long size)
{

        if (!phys || !size)
                return NULL;

        return early_memremap(phys, size);
}

void __init __acpi_unmap_table(void __iomem *map, unsigned long size)
{
        if (!map || !size)
                return;

        early_memunmap(map, size);
}

#ifdef CONFIG_X86_LOCAL_APIC
static int __init acpi_parse_madt(struct acpi_table_header *table)
{
        struct acpi_table_madt *madt = NULL;

        if (!boot_cpu_has(X86_FEATURE_APIC))
                return -EINVAL;

        madt = (struct acpi_table_madt *)table;
        if (!madt) {
                pr_warn("Unable to map MADT\n");
                return -ENODEV;
        }

        if (madt->address) {
                acpi_lapic_addr = (u64) madt->address;

                pr_debug("Local APIC address 0x%08x\n", madt->address);
        }

        if (madt->flags & ACPI_MADT_PCAT_COMPAT)
                legacy_pic_pcat_compat();

        /* ACPI 6.3 and newer support the online capable bit. */
        if (acpi_gbl_FADT.header.revision > 6 ||
            (acpi_gbl_FADT.header.revision == 6 &&
             acpi_gbl_FADT.minor_revision >= 3))
                acpi_support_online_capable = true;

        default_acpi_madt_oem_check(madt->header.oem_id,
                                    madt->header.oem_table_id);

        return 0;
}

static bool __init acpi_is_processor_usable(u32 lapic_flags)
{
        if (lapic_flags & ACPI_MADT_ENABLED)
                return true;

        if (acpi_support_online_capable)
                return lapic_flags & ACPI_MADT_ONLINE_CAPABLE;

        /*
         * QEMU expects legacy "Enabled=0" LAPIC entries to be counted as usable
         * in order to support CPU hotplug in guests.
         */
        return !hypervisor_is_type(X86_HYPER_NATIVE);
}

static int __init
acpi_parse_x2apic(union acpi_subtable_headers *header, const unsigned long end)
{
        struct acpi_madt_local_x2apic *processor = NULL;
#ifdef CONFIG_X86_X2APIC
        u32 apic_id;
        u8 enabled;
#endif

        processor = (struct acpi_madt_local_x2apic *)header;

        if (BAD_MADT_ENTRY(processor, end))
                return -EINVAL;

        acpi_table_print_madt_entry(&header->common);

#ifdef CONFIG_X86_X2APIC
        apic_id = processor->local_apic_id;
        enabled = processor->lapic_flags & ACPI_MADT_ENABLED;

        /* Ignore invalid ID */
        if (apic_id == 0xffffffff)
                return 0;

        /* don't register processors that cannot be onlined */
        if (!acpi_is_processor_usable(processor->lapic_flags))
                return 0;

        /*
         * According to https://uefi.org/specs/ACPI/6.5/05_ACPI_Software_Programming_Model.html#processor-local-x2apic-structure
         * when MADT provides both valid LAPIC and x2APIC entries, the APIC ID
         * in x2APIC must be equal or greater than 0xff.
         */
        if (has_lapic_cpus && apic_id < 0xff)
                return 0;

        /*
         * We need to register disabled CPU as well to permit
         * counting disabled CPUs. This allows us to size
         * cpus_possible_map more accurately, to permit
         * to not preallocating memory for all NR_CPUS
         * when we use CPU hotplug.
         */
        if (!apic_id_valid(apic_id)) {
                if (enabled)
                        pr_warn("x2apic entry ignored\n");
                return 0;
        }

        topology_register_apic(apic_id, processor->uid, enabled);
#else
        pr_warn("x2apic entry ignored\n");
#endif

        return 0;
}

static int __init
acpi_check_lapic(union acpi_subtable_headers *header, const unsigned long end)
{
        struct acpi_madt_local_apic *processor = NULL;

        processor = (struct acpi_madt_local_apic *)header;

        if (BAD_MADT_ENTRY(processor, end))
                return -EINVAL;

        /* Ignore invalid ID */
        if (processor->id == 0xff)
                return 0;

        /* Ignore processors that can not be onlined */
        if (!acpi_is_processor_usable(processor->lapic_flags))
                return 0;

        has_lapic_cpus = true;
        return 0;
}

static int __init
acpi_parse_lapic(union acpi_subtable_headers * header, const unsigned long end)
{
        struct acpi_madt_local_apic *processor = NULL;

        processor = (struct acpi_madt_local_apic *)header;

        if (BAD_MADT_ENTRY(processor, end))
                return -EINVAL;

        acpi_table_print_madt_entry(&header->common);

        /* Ignore invalid ID */
        if (processor->id == 0xff)
                return 0;

        /* don't register processors that can not be onlined */
        if (!acpi_is_processor_usable(processor->lapic_flags))
                return 0;

        /*
         * We need to register disabled CPU as well to permit
         * counting disabled CPUs. This allows us to size
         * cpus_possible_map more accurately, to permit
         * to not preallocating memory for all NR_CPUS
         * when we use CPU hotplug.
         */
        topology_register_apic(processor->id,   /* APIC ID */
                               processor->processor_id, /* ACPI ID */
                               processor->lapic_flags & ACPI_MADT_ENABLED);

        return 0;
}

static int __init
acpi_parse_sapic(union acpi_subtable_headers *header, const unsigned long end)
{
        struct acpi_madt_local_sapic *processor = NULL;

        processor = (struct acpi_madt_local_sapic *)header;

        if (BAD_MADT_ENTRY(processor, end))
                return -EINVAL;

        acpi_table_print_madt_entry(&header->common);

        topology_register_apic((processor->id << 8) | processor->eid,/* APIC ID */
                               processor->processor_id, /* ACPI ID */
                               processor->lapic_flags & ACPI_MADT_ENABLED);

        return 0;
}

static int __init
acpi_parse_lapic_addr_ovr(union acpi_subtable_headers * header,
                          const unsigned long end)
{
        struct acpi_madt_local_apic_override *lapic_addr_ovr = NULL;

        lapic_addr_ovr = (struct acpi_madt_local_apic_override *)header;

        if (BAD_MADT_ENTRY(lapic_addr_ovr, end))
                return -EINVAL;

        acpi_table_print_madt_entry(&header->common);

        acpi_lapic_addr = lapic_addr_ovr->address;

        return 0;
}

static int __init
acpi_parse_x2apic_nmi(union acpi_subtable_headers *header,
                      const unsigned long end)
{
        struct acpi_madt_local_x2apic_nmi *x2apic_nmi = NULL;

        x2apic_nmi = (struct acpi_madt_local_x2apic_nmi *)header;

        if (BAD_MADT_ENTRY(x2apic_nmi, end))
                return -EINVAL;

        acpi_table_print_madt_entry(&header->common);

        if (x2apic_nmi->lint != 1)
                pr_warn("NMI not connected to LINT 1!\n");

        return 0;
}

static int __init
acpi_parse_lapic_nmi(union acpi_subtable_headers * header, const unsigned long end)
{
        struct acpi_madt_local_apic_nmi *lapic_nmi = NULL;

        lapic_nmi = (struct acpi_madt_local_apic_nmi *)header;

        if (BAD_MADT_ENTRY(lapic_nmi, end))
                return -EINVAL;

        acpi_table_print_madt_entry(&header->common);

        if (lapic_nmi->lint != 1)
                pr_warn("NMI not connected to LINT 1!\n");

        return 0;
}
#endif /* CONFIG_X86_LOCAL_APIC */

#ifdef CONFIG_X86_IO_APIC
#define MP_ISA_BUS              0

static int __init mp_register_ioapic_irq(u8 bus_irq, u8 polarity,
                                                u8 trigger, u32 gsi);

static void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
                                          u32 gsi)
{
        /*
         * Check bus_irq boundary.
         */
        if (bus_irq >= NR_IRQS_LEGACY) {
                pr_warn("Invalid bus_irq %u for legacy override\n", bus_irq);
                return;
        }

        /*
         * TBD: This check is for faulty timer entries, where the override
         *      erroneously sets the trigger to level, resulting in a HUGE
         *      increase of timer interrupts!
         */
        if ((bus_irq == 0) && (trigger == 3))
                trigger = 1;

        if (mp_register_ioapic_irq(bus_irq, polarity, trigger, gsi) < 0)
                return;
        /*
         * Reset default identity mapping if gsi is also an legacy IRQ,
         * otherwise there will be more than one entry with the same GSI
         * and acpi_isa_irq_to_gsi() may give wrong result.
         */
        if (gsi < nr_legacy_irqs() && isa_irq_to_gsi[gsi] == gsi)
                isa_irq_to_gsi[gsi] = INVALID_ACPI_IRQ;
        isa_irq_to_gsi[bus_irq] = gsi;
}

static void mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
                        int polarity)
{
#ifdef CONFIG_X86_MPPARSE
        struct mpc_intsrc mp_irq;
        struct pci_dev *pdev;
        unsigned char number;
        unsigned int devfn;
        int ioapic;
        u8 pin;

        if (!acpi_ioapic)
                return;
        if (!dev || !dev_is_pci(dev))
                return;

        pdev = to_pci_dev(dev);
        number = pdev->bus->number;
        devfn = pdev->devfn;
        pin = pdev->pin;
        /* print the entry should happen on mptable identically */
        mp_irq.type = MP_INTSRC;
        mp_irq.irqtype = mp_INT;
        mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
                                (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
        mp_irq.srcbus = number;
        mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
        ioapic = mp_find_ioapic(gsi);
        mp_irq.dstapic = mpc_ioapic_id(ioapic);
        mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);

        mp_save_irq(&mp_irq);
#endif
}

static int __init mp_register_ioapic_irq(u8 bus_irq, u8 polarity,
                                                u8 trigger, u32 gsi)
{
        struct mpc_intsrc mp_irq;
        int ioapic, pin;

        /* Convert 'gsi' to 'ioapic.pin'(INTIN#) */
        ioapic = mp_find_ioapic(gsi);
        if (ioapic < 0) {
                pr_warn("Failed to find ioapic for gsi : %u\n", gsi);
                return ioapic;
        }

        pin = mp_find_ioapic_pin(ioapic, gsi);

        mp_irq.type = MP_INTSRC;
        mp_irq.irqtype = mp_INT;
        mp_irq.irqflag = (trigger << 2) | polarity;
        mp_irq.srcbus = MP_ISA_BUS;
        mp_irq.srcbusirq = bus_irq;
        mp_irq.dstapic = mpc_ioapic_id(ioapic);
        mp_irq.dstirq = pin;

        mp_save_irq(&mp_irq);

        return 0;
}

static int __init
acpi_parse_ioapic(union acpi_subtable_headers * header, const unsigned long end)
{
        struct acpi_madt_io_apic *ioapic = NULL;
        struct ioapic_domain_cfg cfg = {
                .type = IOAPIC_DOMAIN_DYNAMIC,
                .ops = &mp_ioapic_irqdomain_ops,
        };

        ioapic = (struct acpi_madt_io_apic *)header;

        if (BAD_MADT_ENTRY(ioapic, end))
                return -EINVAL;

        acpi_table_print_madt_entry(&header->common);

        /* Statically assign IRQ numbers for IOAPICs hosting legacy IRQs */
        if (ioapic->global_irq_base < nr_legacy_irqs())
                cfg.type = IOAPIC_DOMAIN_LEGACY;

        mp_register_ioapic(ioapic->id, ioapic->address, ioapic->global_irq_base,
                           &cfg);

        return 0;
}

/*
 * Parse Interrupt Source Override for the ACPI SCI
 */
static void __init acpi_sci_ioapic_setup(u8 bus_irq, u16 polarity, u16 trigger, u32 gsi)
{
        if (trigger == 0)       /* compatible SCI trigger is level */
                trigger = 3;

        if (polarity == 0)      /* compatible SCI polarity is low */
                polarity = 3;

        /* Command-line over-ride via acpi_sci= */
        if (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK)
                trigger = (acpi_sci_flags & ACPI_MADT_TRIGGER_MASK) >> 2;

        if (acpi_sci_flags & ACPI_MADT_POLARITY_MASK)
                polarity = acpi_sci_flags & ACPI_MADT_POLARITY_MASK;

        if (bus_irq < NR_IRQS_LEGACY)
                mp_override_legacy_irq(bus_irq, polarity, trigger, gsi);
        else
                mp_register_ioapic_irq(bus_irq, polarity, trigger, gsi);

        acpi_penalize_sci_irq(bus_irq, trigger, polarity);

        /*
         * stash over-ride to indicate we've been here
         * and for later update of acpi_gbl_FADT
         */
        acpi_sci_override_gsi = gsi;
        return;
}

static int __init
acpi_parse_int_src_ovr(union acpi_subtable_headers * header,
                       const unsigned long end)
{
        struct acpi_madt_interrupt_override *intsrc = NULL;

        intsrc = (struct acpi_madt_interrupt_override *)header;

        if (BAD_MADT_ENTRY(intsrc, end))
                return -EINVAL;

        acpi_table_print_madt_entry(&header->common);

        if (intsrc->source_irq < NR_IRQS_LEGACY)
                acpi_int_src_ovr[intsrc->source_irq] = true;

        if (intsrc->source_irq == acpi_gbl_FADT.sci_interrupt) {
                acpi_sci_ioapic_setup(intsrc->source_irq,
                                      intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
                                      (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2,
                                      intsrc->global_irq);
                return 0;
        }

        if (intsrc->source_irq == 0) {
                if (acpi_skip_timer_override) {
                        pr_warn("BIOS IRQ0 override ignored.\n");
                        return 0;
                }

                if ((intsrc->global_irq == 2) && acpi_fix_pin2_polarity
                        && (intsrc->inti_flags & ACPI_MADT_POLARITY_MASK)) {
                        intsrc->inti_flags &= ~ACPI_MADT_POLARITY_MASK;
                        pr_warn("BIOS IRQ0 pin2 override: forcing polarity to high active.\n");
                }
        }

        mp_override_legacy_irq(intsrc->source_irq,
                                intsrc->inti_flags & ACPI_MADT_POLARITY_MASK,
                                (intsrc->inti_flags & ACPI_MADT_TRIGGER_MASK) >> 2,
                                intsrc->global_irq);

        return 0;
}

static int __init
acpi_parse_nmi_src(union acpi_subtable_headers * header, const unsigned long end)
{
        struct acpi_madt_nmi_source *nmi_src = NULL;

        nmi_src = (struct acpi_madt_nmi_source *)header;

        if (BAD_MADT_ENTRY(nmi_src, end))
                return -EINVAL;

        acpi_table_print_madt_entry(&header->common);

        /* TBD: Support nimsrc entries? */

        return 0;
}

#endif                          /* CONFIG_X86_IO_APIC */

/*
 * acpi_pic_sci_set_trigger()
 *
 * use ELCR to set PIC-mode trigger type for SCI
 *
 * If a PIC-mode SCI is not recognized or gives spurious IRQ7's
 * it may require Edge Trigger -- use "acpi_sci=edge"
 *
 * Port 0x4d0-4d1 are ELCR1 and ELCR2, the Edge/Level Control Registers
 * for the 8259 PIC.  bit[n] = 1 means irq[n] is Level, otherwise Edge.
 * ELCR1 is IRQs 0-7 (IRQ 0, 1, 2 must be 0)
 * ELCR2 is IRQs 8-15 (IRQ 8, 13 must be 0)
 */

void __init acpi_pic_sci_set_trigger(unsigned int irq, u16 trigger)
{
        unsigned int mask = 1 << irq;
        unsigned int old, new;

        /* Real old ELCR mask */
        old = inb(PIC_ELCR1) | (inb(PIC_ELCR2) << 8);

        /*
         * If we use ACPI to set PCI IRQs, then we should clear ELCR
         * since we will set it correctly as we enable the PCI irq
         * routing.
         */
        new = acpi_noirq ? old : 0;

        /*
         * Update SCI information in the ELCR, it isn't in the PCI
         * routing tables..
         */
        switch (trigger) {
        case 1:         /* Edge - clear */
                new &= ~mask;
                break;
        case 3:         /* Level - set */
                new |= mask;
                break;
        }

        if (old == new)
                return;

        pr_warn("setting ELCR to %04x (from %04x)\n", new, old);
        outb(new, PIC_ELCR1);
        outb(new >> 8, PIC_ELCR2);
}

int acpi_gsi_to_irq(u32 gsi, unsigned int *irqp)
{
        int rc, irq, trigger, polarity;

        if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
                *irqp = gsi;
                return 0;
        }

        rc = acpi_get_override_irq(gsi, &trigger, &polarity);
        if (rc)
                return rc;

        trigger = trigger ? ACPI_LEVEL_SENSITIVE : ACPI_EDGE_SENSITIVE;
        polarity = polarity ? ACPI_ACTIVE_LOW : ACPI_ACTIVE_HIGH;
        irq = acpi_register_gsi(NULL, gsi, trigger, polarity);
        if (irq < 0)
                return irq;

        *irqp = irq;
        return 0;
}
EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);

int acpi_isa_irq_to_gsi(unsigned isa_irq, u32 *gsi)
{
        if (isa_irq < nr_legacy_irqs() &&
            isa_irq_to_gsi[isa_irq] != INVALID_ACPI_IRQ) {
                *gsi = isa_irq_to_gsi[isa_irq];
                return 0;
        }

        return -1;
}

static int acpi_register_gsi_pic(struct device *dev, u32 gsi,
                                 int trigger, int polarity)
{
#ifdef CONFIG_PCI
        /*
         * Make sure all (legacy) PCI IRQs are set as level-triggered.
         */
        if (trigger == ACPI_LEVEL_SENSITIVE)
                elcr_set_level_irq(gsi);
#endif

        return gsi;
}

#ifdef CONFIG_X86_LOCAL_APIC
static int acpi_register_gsi_ioapic(struct device *dev, u32 gsi,
                                    int trigger, int polarity)
{
        int irq = gsi;
#ifdef CONFIG_X86_IO_APIC
        int node;
        struct irq_alloc_info info;

        node = dev ? dev_to_node(dev) : NUMA_NO_NODE;
        trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1;
        polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1;
        ioapic_set_alloc_attr(&info, node, trigger, polarity);

        mutex_lock(&acpi_ioapic_lock);
        irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC, &info);
        /* Don't set up the ACPI SCI because it's already set up */
        if (irq >= 0 && enable_update_mptable && gsi != acpi_gbl_FADT.sci_interrupt)
                mp_config_acpi_gsi(dev, gsi, trigger, polarity);
        mutex_unlock(&acpi_ioapic_lock);
#endif

        return irq;
}

static void acpi_unregister_gsi_ioapic(u32 gsi)
{
#ifdef CONFIG_X86_IO_APIC
        int irq;

        mutex_lock(&acpi_ioapic_lock);
        irq = mp_map_gsi_to_irq(gsi, 0, NULL);
        if (irq > 0)
                mp_unmap_irq(irq);
        mutex_unlock(&acpi_ioapic_lock);
#endif
}
#endif

int (*__acpi_register_gsi)(struct device *dev, u32 gsi,
                           int trigger, int polarity) = acpi_register_gsi_pic;
void (*__acpi_unregister_gsi)(u32 gsi) = NULL;

#ifdef CONFIG_ACPI_SLEEP
int (*acpi_suspend_lowlevel)(void) = x86_acpi_suspend_lowlevel;
#else
int (*acpi_suspend_lowlevel)(void);
#endif

/*
 * success: return IRQ number (>=0)
 * failure: return < 0
 */
int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
{
        return __acpi_register_gsi(dev, gsi, trigger, polarity);
}
EXPORT_SYMBOL_GPL(acpi_register_gsi);

void acpi_unregister_gsi(u32 gsi)
{
        if (__acpi_unregister_gsi)
                __acpi_unregister_gsi(gsi);
}
EXPORT_SYMBOL_GPL(acpi_unregister_gsi);

#ifdef CONFIG_X86_LOCAL_APIC
static void __init acpi_set_irq_model_ioapic(void)
{
        acpi_irq_model = ACPI_IRQ_MODEL_IOAPIC;
        __acpi_register_gsi = acpi_register_gsi_ioapic;
        __acpi_unregister_gsi = acpi_unregister_gsi_ioapic;
        acpi_ioapic = 1;
}
#endif

/*
 *  ACPI based hotplug support for CPU
 */
#ifdef CONFIG_ACPI_HOTPLUG_CPU
#include <acpi/processor.h>

static int acpi_map_cpu2node(acpi_handle handle, int cpu, int physid)
{
#ifdef CONFIG_ACPI_NUMA
        int nid;

        nid = acpi_get_node(handle);
        if (nid != NUMA_NO_NODE) {
                set_apicid_to_node(physid, nid);
                numa_set_node(cpu, nid);
        }
#endif
        return 0;
}

int acpi_map_cpu(acpi_handle handle, phys_cpuid_t physid, u32 acpi_id, int *pcpu)
{
        int cpu = topology_hotplug_apic(physid, acpi_id);

        if (cpu < 0) {
                pr_info("Unable to map lapic to logical cpu number\n");
                return cpu;
        }

        acpi_processor_set_pdc(handle);
        acpi_map_cpu2node(handle, cpu, physid);

        *pcpu = cpu;
        return 0;
}
EXPORT_SYMBOL(acpi_map_cpu);

int acpi_unmap_cpu(int cpu)
{
#ifdef CONFIG_ACPI_NUMA
        set_apicid_to_node(per_cpu(x86_cpu_to_apicid, cpu), NUMA_NO_NODE);
#endif
        topology_hotunplug_apic(cpu);
        return 0;
}
EXPORT_SYMBOL(acpi_unmap_cpu);
#endif  /* CONFIG_ACPI_HOTPLUG_CPU */

int acpi_register_ioapic(acpi_handle handle, u64 phys_addr, u32 gsi_base)
{
        int ret = -ENOSYS;
#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
        int ioapic_id;
        u64 addr;
        struct ioapic_domain_cfg cfg = {
                .type = IOAPIC_DOMAIN_DYNAMIC,
                .ops = &mp_ioapic_irqdomain_ops,
        };

        ioapic_id = acpi_get_ioapic_id(handle, gsi_base, &addr);
        if (ioapic_id < 0) {
                unsigned long long uid;
                acpi_status status;

                status = acpi_evaluate_integer(handle, METHOD_NAME__UID,
                                               NULL, &uid);
                if (ACPI_FAILURE(status)) {
                        acpi_handle_warn(handle, "failed to get IOAPIC ID.\n");
                        return -EINVAL;
                }
                ioapic_id = (int)uid;
        }

        mutex_lock(&acpi_ioapic_lock);
        ret  = mp_register_ioapic(ioapic_id, phys_addr, gsi_base, &cfg);
        mutex_unlock(&acpi_ioapic_lock);
#endif

        return ret;
}
EXPORT_SYMBOL(acpi_register_ioapic);

int acpi_unregister_ioapic(acpi_handle handle, u32 gsi_base)
{
        int ret = -ENOSYS;

#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
        mutex_lock(&acpi_ioapic_lock);
        ret  = mp_unregister_ioapic(gsi_base);
        mutex_unlock(&acpi_ioapic_lock);
#endif

        return ret;
}
EXPORT_SYMBOL(acpi_unregister_ioapic);

/**
 * acpi_ioapic_registered - Check whether IOAPIC associated with @gsi_base
 *                          has been registered
 * @handle:     ACPI handle of the IOAPIC device
 * @gsi_base:   GSI base associated with the IOAPIC
 *
 * Assume caller holds some type of lock to serialize acpi_ioapic_registered()
 * with acpi_register_ioapic()/acpi_unregister_ioapic().
 */
int acpi_ioapic_registered(acpi_handle handle, u32 gsi_base)
{
        int ret = 0;

#ifdef CONFIG_ACPI_HOTPLUG_IOAPIC
        mutex_lock(&acpi_ioapic_lock);
        ret  = mp_ioapic_registered(gsi_base);
        mutex_unlock(&acpi_ioapic_lock);
#endif

        return ret;
}

static int __init acpi_parse_sbf(struct acpi_table_header *table)
{
        struct acpi_table_boot *sb = (struct acpi_table_boot *)table;

        sbf_port = sb->cmos_index;      /* Save CMOS port */

        return 0;
}

#ifdef CONFIG_HPET_TIMER
#include <asm/hpet.h>

static struct resource *hpet_res __initdata;

static int __init acpi_parse_hpet(struct acpi_table_header *table)
{
        struct acpi_table_hpet *hpet_tbl = (struct acpi_table_hpet *)table;

        if (hpet_tbl->address.space_id != ACPI_SPACE_MEM) {
                pr_warn("HPET timers must be located in memory.\n");
                return -1;
        }

        hpet_address = hpet_tbl->address.address;
        hpet_blockid = hpet_tbl->sequence;

        /*
         * Some broken BIOSes advertise HPET at 0x0. We really do not
         * want to allocate a resource there.
         */
        if (!hpet_address) {
                pr_warn("HPET id: %#x base: %#lx is invalid\n", hpet_tbl->id, hpet_address);
                return 0;
        }
#ifdef CONFIG_X86_64
        /*
         * Some even more broken BIOSes advertise HPET at
         * 0xfed0000000000000 instead of 0xfed00000. Fix it up and add
         * some noise:
         */
        if (hpet_address == 0xfed0000000000000UL) {
                if (!hpet_force_user) {
                        pr_warn("HPET id: %#x base: 0xfed0000000000000 is bogus, try hpet=force on the kernel command line to fix it up to 0xfed00000.\n",
                                hpet_tbl->id);
                        hpet_address = 0;
                        return 0;
                }
                pr_warn("HPET id: %#x base: 0xfed0000000000000 fixed up to 0xfed00000.\n",
                        hpet_tbl->id);
                hpet_address >>= 32;
        }
#endif
        pr_info("HPET id: %#x base: %#lx\n", hpet_tbl->id, hpet_address);

        /*
         * Allocate and initialize the HPET firmware resource for adding into
         * the resource tree during the lateinit timeframe.
         */
#define HPET_RESOURCE_NAME_SIZE 9
        hpet_res = memblock_alloc_or_panic(sizeof(*hpet_res) + HPET_RESOURCE_NAME_SIZE,
                                  SMP_CACHE_BYTES);

        hpet_res->name = (void *)&hpet_res[1];
        hpet_res->flags = IORESOURCE_MEM;
        snprintf((char *)hpet_res->name, HPET_RESOURCE_NAME_SIZE, "HPET %u",
                 hpet_tbl->sequence);

        hpet_res->start = hpet_address;
        hpet_res->end = hpet_address + (1 * 1024) - 1;

        return 0;
}

/*
 * hpet_insert_resource inserts the HPET resources used into the resource
 * tree.
 */
static __init int hpet_insert_resource(void)
{
        if (!hpet_res)
                return 1;

        return insert_resource(&iomem_resource, hpet_res);
}

late_initcall(hpet_insert_resource);

#else
#define acpi_parse_hpet NULL
#endif

static int __init acpi_parse_fadt(struct acpi_table_header *table)
{
        if (!(acpi_gbl_FADT.boot_flags & ACPI_FADT_LEGACY_DEVICES)) {
                pr_debug("no legacy devices present\n");
                x86_platform.legacy.devices.pnpbios = 0;
        }

        if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
            !(acpi_gbl_FADT.boot_flags & ACPI_FADT_8042) &&
            x86_platform.legacy.i8042 != X86_LEGACY_I8042_PLATFORM_ABSENT) {
                pr_debug("i8042 controller is absent\n");
                x86_platform.legacy.i8042 = X86_LEGACY_I8042_FIRMWARE_ABSENT;
        }

        if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_CMOS_RTC) {
                pr_debug("not registering RTC platform device\n");
                x86_platform.legacy.rtc = 0;
        }

        if (acpi_gbl_FADT.boot_flags & ACPI_FADT_NO_VGA) {
                pr_debug("probing for VGA not safe\n");
                x86_platform.legacy.no_vga = 1;
        }

#ifdef CONFIG_X86_PM_TIMER
        /* detect the location of the ACPI PM Timer */
        if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID) {
                /* FADT rev. 2 */
                if (acpi_gbl_FADT.xpm_timer_block.space_id !=
                    ACPI_ADR_SPACE_SYSTEM_IO)
                        return 0;

                pmtmr_ioport = acpi_gbl_FADT.xpm_timer_block.address;
                /*
                 * "X" fields are optional extensions to the original V1.0
                 * fields, so we must selectively expand V1.0 fields if the
                 * corresponding X field is zero.
                 */
                if (!pmtmr_ioport)
                        pmtmr_ioport = acpi_gbl_FADT.pm_timer_block;
        } else {
                /* FADT rev. 1 */
                pmtmr_ioport = acpi_gbl_FADT.pm_timer_block;
        }
        if (pmtmr_ioport)
                pr_info("PM-Timer IO Port: %#x\n", pmtmr_ioport);
#endif
        return 0;
}

#ifdef  CONFIG_X86_LOCAL_APIC
/*
 * Parse LAPIC entries in MADT
 * returns 0 on success, < 0 on error
 */

static int __init early_acpi_parse_madt_lapic_addr_ovr(void)
{
        int count;

        if (!boot_cpu_has(X86_FEATURE_APIC))
                return -ENODEV;

        /*
         * Note that the LAPIC address is obtained from the MADT (32-bit value)
         * and (optionally) overridden by a LAPIC_ADDR_OVR entry (64-bit value).
         */

        count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_OVERRIDE,
                                      acpi_parse_lapic_addr_ovr, 0);
        if (count < 0) {
                pr_err("Error parsing LAPIC address override entry\n");
                return count;
        }

        register_lapic_address(acpi_lapic_addr);

        return count;
}

static int __init acpi_parse_madt_lapic_entries(void)
{
        int count, x2count = 0;
        struct acpi_subtable_proc madt_proc[2];
        int ret;

        if (!boot_cpu_has(X86_FEATURE_APIC))
                return -ENODEV;

        count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_SAPIC,
                                      acpi_parse_sapic, MAX_LOCAL_APIC);

        if (!count) {
                /* Check if there are valid LAPIC entries */
                acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC, acpi_check_lapic, MAX_LOCAL_APIC);

                /*
                 * Enumerate the APIC IDs in the order that they appear in the
                 * MADT, no matter LAPIC entry or x2APIC entry is used.
                 */
                memset(madt_proc, 0, sizeof(madt_proc));
                madt_proc[0].id = ACPI_MADT_TYPE_LOCAL_APIC;
                madt_proc[0].handler = acpi_parse_lapic;
                madt_proc[1].id = ACPI_MADT_TYPE_LOCAL_X2APIC;
                madt_proc[1].handler = acpi_parse_x2apic;
                ret = acpi_table_parse_entries_array(ACPI_SIG_MADT,
                                sizeof(struct acpi_table_madt),
                                madt_proc, ARRAY_SIZE(madt_proc), MAX_LOCAL_APIC);
                if (ret < 0) {
                        pr_err("Error parsing LAPIC/X2APIC entries\n");
                        return ret;
                }
                count = madt_proc[0].count;
                x2count = madt_proc[1].count;
        }
        if (!count && !x2count) {
                pr_err("No LAPIC entries present\n");
                /* TBD: Cleanup to allow fallback to MPS */
                return -ENODEV;
        } else if (count < 0 || x2count < 0) {
                pr_err("Error parsing LAPIC entry\n");
                /* TBD: Cleanup to allow fallback to MPS */
                return count;
        }

        x2count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_X2APIC_NMI,
                                        acpi_parse_x2apic_nmi, 0);
        count = acpi_table_parse_madt(ACPI_MADT_TYPE_LOCAL_APIC_NMI,
                                      acpi_parse_lapic_nmi, 0);
        if (count < 0 || x2count < 0) {
                pr_err("Error parsing LAPIC NMI entry\n");
                /* TBD: Cleanup to allow fallback to MPS */
                return count;
        }
        return 0;
}
#endif                          /* CONFIG_X86_LOCAL_APIC */

#ifdef  CONFIG_X86_IO_APIC
static void __init mp_config_acpi_legacy_irqs(void)
{
        int i;
        struct mpc_intsrc mp_irq;

#ifdef CONFIG_EISA
        /*
         * Fabricate the legacy ISA bus (bus #31).
         */
        mp_bus_id_to_type[MP_ISA_BUS] = MP_BUS_ISA;
#endif
        set_bit(MP_ISA_BUS, mp_bus_not_pci);
        pr_debug("Bus #%d is ISA (nIRQs: %d)\n", MP_ISA_BUS, nr_legacy_irqs());

        /*
         * Use the default configuration for the IRQs 0-15.  Unless
         * overridden by (MADT) interrupt source override entries.
         */
        for (i = 0; i < nr_legacy_irqs(); i++) {
                int ioapic, pin;
                unsigned int dstapic;
                int idx;
                u32 gsi;

                /* Locate the gsi that irq i maps to. */
                if (acpi_isa_irq_to_gsi(i, &gsi))
                        continue;

                /*
                 * Locate the IOAPIC that manages the ISA IRQ.
                 */
                ioapic = mp_find_ioapic(gsi);
                if (ioapic < 0)
                        continue;
                pin = mp_find_ioapic_pin(ioapic, gsi);
                dstapic = mpc_ioapic_id(ioapic);

                for (idx = 0; idx < mp_irq_entries; idx++) {
                        struct mpc_intsrc *irq = mp_irqs + idx;

                        /* Do we already have a mapping for this ISA IRQ? */
                        if (irq->srcbus == MP_ISA_BUS && irq->srcbusirq == i)
                                break;

                        /* Do we already have a mapping for this IOAPIC pin */
                        if (irq->dstapic == dstapic && irq->dstirq == pin)
                                break;
                }

                if (idx != mp_irq_entries) {
                        pr_debug("ACPI: IRQ%d used by override.\n", i);
                        continue;       /* IRQ already used */
                }

                mp_irq.type = MP_INTSRC;
                mp_irq.irqflag = 0;     /* Conforming */
                mp_irq.srcbus = MP_ISA_BUS;
                mp_irq.dstapic = dstapic;
                mp_irq.irqtype = mp_INT;
                mp_irq.srcbusirq = i; /* Identity mapped */
                mp_irq.dstirq = pin;

                mp_save_irq(&mp_irq);
        }
}

/*
 * Parse IOAPIC related entries in MADT
 * returns 0 on success, < 0 on error
 */
static int __init acpi_parse_madt_ioapic_entries(void)
{
        int count;

        /*
         * ACPI interpreter is required to complete interrupt setup,
         * so if it is off, don't enumerate the io-apics with ACPI.
         * If MPS is present, it will handle them,
         * otherwise the system will stay in PIC mode
         */
        if (acpi_disabled || acpi_noirq)
                return -ENODEV;

        if (!boot_cpu_has(X86_FEATURE_APIC))
                return -ENODEV;

        /*
         * if "noapic" boot option, don't look for IO-APICs
         */
        if (ioapic_is_disabled) {
                pr_info("Skipping IOAPIC probe due to 'noapic' option.\n");
                return -ENODEV;
        }

        count = acpi_table_parse_madt(ACPI_MADT_TYPE_IO_APIC, acpi_parse_ioapic,
                                      MAX_IO_APICS);
        if (!count) {
                pr_err("No IOAPIC entries present\n");
                return -ENODEV;
        } else if (count < 0) {
                pr_err("Error parsing IOAPIC entry\n");
                return count;
        }

        count = acpi_table_parse_madt(ACPI_MADT_TYPE_INTERRUPT_OVERRIDE,
                                      acpi_parse_int_src_ovr,
                                      irq_get_nr_irqs());
        if (count < 0) {
                pr_err("Error parsing interrupt source overrides entry\n");
                /* TBD: Cleanup to allow fallback to MPS */
                return count;
        }

        /*
         * If BIOS did not supply an INT_SRC_OVR for the SCI
         * pretend we got one so we can set the SCI flags.
         * But ignore setting up SCI on hardware reduced platforms.
         */
        if (acpi_sci_override_gsi == INVALID_ACPI_IRQ && !acpi_gbl_reduced_hardware)
                acpi_sci_ioapic_setup(acpi_gbl_FADT.sci_interrupt, 0, 0,
                                      acpi_gbl_FADT.sci_interrupt);

        /* Fill in identity legacy mappings where no override */
        mp_config_acpi_legacy_irqs();

        count = acpi_table_parse_madt(ACPI_MADT_TYPE_NMI_SOURCE,
                                      acpi_parse_nmi_src,
                                      irq_get_nr_irqs());
        if (count < 0) {
                pr_err("Error parsing NMI SRC entry\n");
                /* TBD: Cleanup to allow fallback to MPS */
                return count;
        }

        return 0;
}
#else
static inline int acpi_parse_madt_ioapic_entries(void)
{
        return -1;
}
#endif  /* !CONFIG_X86_IO_APIC */

static void __init early_acpi_process_madt(void)
{
#ifdef CONFIG_X86_LOCAL_APIC
        int error;

        if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {

                /*
                 * Parse MADT LAPIC entries
                 */
                error = early_acpi_parse_madt_lapic_addr_ovr();
                if (!error) {
                        acpi_lapic = 1;
                        smp_found_config = 1;
                }
                if (error == -EINVAL) {
                        /*
                         * Dell Precision Workstation 410, 610 come here.
                         */
                        pr_err("Invalid BIOS MADT, disabling ACPI\n");
                        disable_acpi();
                }
        }
#endif
}

static void __init acpi_process_madt(void)
{
#ifdef CONFIG_X86_LOCAL_APIC
        int error;

        if (!acpi_table_parse(ACPI_SIG_MADT, acpi_parse_madt)) {

                /*
                 * Parse MADT LAPIC entries
                 */
                error = acpi_parse_madt_lapic_entries();
                if (!error) {
                        acpi_lapic = 1;

                        /*
                         * Parse MADT IO-APIC entries
                         */
                        mutex_lock(&acpi_ioapic_lock);
                        error = acpi_parse_madt_ioapic_entries();
                        mutex_unlock(&acpi_ioapic_lock);
                        if (!error) {
                                acpi_set_irq_model_ioapic();

                                smp_found_config = 1;
                        }

#ifdef CONFIG_ACPI_MADT_WAKEUP
                        /*
                         * Parse MADT MP Wake entry.
                         */
                        acpi_table_parse_madt(ACPI_MADT_TYPE_MULTIPROC_WAKEUP,
                                              acpi_parse_mp_wake, 1);
#endif
                }
                if (error == -EINVAL) {
                        /*
                         * Dell Precision Workstation 410, 610 come here.
                         */
                        pr_err("Invalid BIOS MADT, disabling ACPI\n");
                        disable_acpi();
                }
        } else {
                /*
                 * ACPI found no MADT, and so ACPI wants UP PIC mode.
                 * In the event an MPS table was found, forget it.
                 * Boot with "acpi=off" to use MPS on such a system.
                 */
                if (smp_found_config) {
                        pr_warn("No APIC-table, disabling MPS\n");
                        smp_found_config = 0;
                }
        }

        /*
         * ACPI supports both logical (e.g. Hyper-Threading) and physical
         * processors, where MPS only supports physical.
         */
        if (acpi_lapic && acpi_ioapic)
                pr_info("Using ACPI (MADT) for SMP configuration information\n");
        else if (acpi_lapic)
                pr_info("Using ACPI for processor (LAPIC) configuration information\n");
#endif
        return;
}

static int __init disable_acpi_irq(const struct dmi_system_id *d)
{
        if (!acpi_force) {
                pr_notice("%s detected: force use of acpi=noirq\n", d->ident);
                acpi_noirq_set();
        }
        return 0;
}

static int __init disable_acpi_pci(const struct dmi_system_id *d)
{
        if (!acpi_force) {
                pr_notice("%s detected: force use of pci=noacpi\n", d->ident);
                acpi_disable_pci();
        }
        return 0;
}

static int __init disable_acpi_xsdt(const struct dmi_system_id *d)
{
        if (!acpi_force) {
                pr_notice("%s detected: force use of acpi=rsdt\n", d->ident);
                acpi_gbl_do_not_use_xsdt = TRUE;
        } else {
                pr_notice("Warning: DMI blacklist says broken, but acpi XSDT forced\n");
        }
        return 0;
}

static int __init dmi_disable_acpi(const struct dmi_system_id *d)
{
        if (!acpi_force) {
                pr_notice("%s detected: acpi off\n", d->ident);
                disable_acpi();
        } else {
                pr_notice("Warning: DMI blacklist says broken, but acpi forced\n");
        }
        return 0;
}

/*
 * Force ignoring BIOS IRQ0 override
 */
static int __init dmi_ignore_irq0_timer_override(const struct dmi_system_id *d)
{
        if (!acpi_skip_timer_override) {
                pr_notice("%s detected: Ignoring BIOS IRQ0 override\n",
                        d->ident);
                acpi_skip_timer_override = 1;
        }
        return 0;
}

/*
 * ACPI offers an alternative platform interface model that removes
 * ACPI hardware requirements for platforms that do not implement
 * the PC Architecture.
 *
 * We initialize the Hardware-reduced ACPI model here:
 */
void __init acpi_generic_reduced_hw_init(void)
{
        /*
         * Override x86_init functions and bypass legacy PIC in
         * hardware reduced ACPI mode.
         */
        x86_init.timers.timer_init      = x86_init_noop;
        x86_init.irqs.pre_vector_init   = x86_init_noop;
        legacy_pic                      = &null_legacy_pic;
}

static void __init acpi_reduced_hw_init(void)
{
        if (acpi_gbl_reduced_hardware)
                x86_init.acpi.reduced_hw_early_init();
}

/*
 * If your system is blacklisted here, but you find that acpi=force
 * works for you, please contact linux-acpi@vger.kernel.org
 */
static const struct dmi_system_id acpi_dmi_table[] __initconst = {
        /*
         * Boxes that need ACPI disabled
         */
        {
         .callback = dmi_disable_acpi,
         .ident = "IBM Thinkpad",
         .matches = {
                     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
                     DMI_MATCH(DMI_BOARD_NAME, "2629H1G"),
                     },
         },

        /*
         * Boxes that need ACPI PCI IRQ routing disabled
         */
        {
         .callback = disable_acpi_irq,
         .ident = "ASUS A7V",
         .matches = {
                     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC"),
                     DMI_MATCH(DMI_BOARD_NAME, "<A7V>"),
                     /* newer BIOS, Revision 1011, does work */
                     DMI_MATCH(DMI_BIOS_VERSION,
                               "ASUS A7V ACPI BIOS Revision 1007"),
                     },
         },
        {
                /*
                 * Latest BIOS for IBM 600E (1.16) has bad pcinum
                 * for LPC bridge, which is needed for the PCI
                 * interrupt links to work. DSDT fix is in bug 5966.
                 * 2645, 2646 model numbers are shared with 600/600E/600X
                 */
         .callback = disable_acpi_irq,
         .ident = "IBM Thinkpad 600 Series 2645",
         .matches = {
                     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
                     DMI_MATCH(DMI_BOARD_NAME, "2645"),
                     },
         },
        {
         .callback = disable_acpi_irq,
         .ident = "IBM Thinkpad 600 Series 2646",
         .matches = {
                     DMI_MATCH(DMI_BOARD_VENDOR, "IBM"),
                     DMI_MATCH(DMI_BOARD_NAME, "2646"),
                     },
         },
        /*
         * Boxes that need ACPI PCI IRQ routing and PCI scan disabled
         */
        {                       /* _BBN 0 bug */
         .callback = disable_acpi_pci,
         .ident = "ASUS PR-DLS",
         .matches = {
                     DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
                     DMI_MATCH(DMI_BOARD_NAME, "PR-DLS"),
                     DMI_MATCH(DMI_BIOS_VERSION,
                               "ASUS PR-DLS ACPI BIOS Revision 1010"),
                     DMI_MATCH(DMI_BIOS_DATE, "03/21/2003")
                     },
         },
        {
         .callback = disable_acpi_pci,
         .ident = "Acer TravelMate 36x Laptop",
         .matches = {
                     DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
                     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
                     },
         },
        /*
         * Boxes that need ACPI XSDT use disabled due to corrupted tables
         */
        {
         .callback = disable_acpi_xsdt,
         .ident = "Advantech DAC-BJ01",
         .matches = {
                     DMI_MATCH(DMI_SYS_VENDOR, "NEC"),
                     DMI_MATCH(DMI_PRODUCT_NAME, "Bearlake CRB Board"),
                     DMI_MATCH(DMI_BIOS_VERSION, "V1.12"),
                     DMI_MATCH(DMI_BIOS_DATE, "02/01/2011"),
                     },
         },
        {}
};

/* second table for DMI checks that should run after early-quirks */
static const struct dmi_system_id acpi_dmi_table_late[] __initconst = {
        /*
         * HP laptops which use a DSDT reporting as HP/SB400/10000,
         * which includes some code which overrides all temperature
         * trip points to 16C if the INTIN2 input of the I/O APIC
         * is enabled.  This input is incorrectly designated the
         * ISA IRQ 0 via an interrupt source override even though
         * it is wired to the output of the master 8259A and INTIN0
         * is not connected at all.  Force ignoring BIOS IRQ0
         * override in that cases.
         */
        {
         .callback = dmi_ignore_irq0_timer_override,
         .ident = "HP nx6115 laptop",
         .matches = {
                     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
                     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6115"),
                     },
         },
        {
         .callback = dmi_ignore_irq0_timer_override,
         .ident = "HP NX6125 laptop",
         .matches = {
                     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
                     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6125"),
                     },
         },
        {
         .callback = dmi_ignore_irq0_timer_override,
         .ident = "HP NX6325 laptop",
         .matches = {
                     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
                     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"),
                     },
         },
        {
         .callback = dmi_ignore_irq0_timer_override,
         .ident = "HP 6715b laptop",
         .matches = {
                     DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
                     DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 6715b"),
                     },
         },
        {
         .callback = dmi_ignore_irq0_timer_override,
         .ident = "FUJITSU SIEMENS",
         .matches = {
                     DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
                     DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
                     },
         },
        {}
};

/*
 * acpi_boot_table_init() and acpi_boot_init()
 *  called from setup_arch(), always.
 *      1. checksums all tables
 *      2. enumerates lapics
 *      3. enumerates io-apics
 *
 * acpi_table_init() is separate to allow reading SRAT without
 * other side effects.
 *
 * side effects of acpi_boot_init:
 *      acpi_lapic = 1 if LAPIC found
 *      acpi_ioapic = 1 if IOAPIC found
 *      if (acpi_lapic && acpi_ioapic) smp_found_config = 1;
 *      if acpi_blacklisted() acpi_disabled = 1;
 *      acpi_irq_model=...
 *      ...
 */

void __init acpi_boot_table_init(void)
{
        dmi_check_system(acpi_dmi_table);

        /*
         * If acpi_disabled, bail out
         */
        if (acpi_disabled)
                return;

        /*
         * Initialize the ACPI boot-time table parser.
         */
        if (acpi_locate_initial_tables())
                disable_acpi();
        else
                acpi_reserve_initial_tables();
}

int __init early_acpi_boot_init(void)
{
        if (acpi_disabled)
                return 1;

        acpi_table_init_complete();

        acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);

        /*
         * blacklist may disable ACPI entirely
         */
        if (acpi_blacklisted()) {
                if (acpi_force) {
                        pr_warn("acpi=force override\n");
                } else {
                        pr_warn("Disabling ACPI support\n");
                        disable_acpi();
                        return 1;
                }
        }

        /*
         * Process the Multiple APIC Description Table (MADT), if present
         */
        early_acpi_process_madt();

        /*
         * Hardware-reduced ACPI mode initialization:
         */
        acpi_reduced_hw_init();

        return 0;
}

int __init acpi_boot_init(void)
{
        /* those are executed after early-quirks are executed */
        dmi_check_system(acpi_dmi_table_late);

        /*
         * If acpi_disabled, bail out
         */
        if (acpi_disabled)
                return 1;

        acpi_table_parse(ACPI_SIG_BOOT, acpi_parse_sbf);

        /*
         * set sci_int and PM timer address
         */
        acpi_table_parse(ACPI_SIG_FADT, acpi_parse_fadt);

        /*
         * Process the Multiple APIC Description Table (MADT), if present
         */
        acpi_process_madt();

        acpi_table_parse(ACPI_SIG_HPET, acpi_parse_hpet);
        if (IS_ENABLED(CONFIG_ACPI_BGRT) && !acpi_nobgrt)
                acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt);

        if (!acpi_noirq)
                x86_init.pci.init = pci_acpi_init;

        acpi_parse_spcr(earlycon_acpi_spcr_enable, acpi_spcr_add);

        return 0;
}

static int __init parse_acpi(char *arg)
{
        if (!arg)
                return -EINVAL;

        /* "acpi=off" disables both ACPI table parsing and interpreter */
        if (strcmp(arg, "off") == 0) {
                disable_acpi();
        }
        /* acpi=force to over-ride black-list */
        else if (strcmp(arg, "force") == 0) {
                acpi_force = 1;
                acpi_disabled = 0;
        }
        /* acpi=strict disables out-of-spec workarounds */
        else if (strcmp(arg, "strict") == 0) {
                acpi_strict = 1;
        }
        /* acpi=rsdt use RSDT instead of XSDT */
        else if (strcmp(arg, "rsdt") == 0) {
                acpi_gbl_do_not_use_xsdt = TRUE;
        }
        /* "acpi=noirq" disables ACPI interrupt routing */
        else if (strcmp(arg, "noirq") == 0) {
                acpi_noirq_set();
        }
        /* "acpi=copy_dsdt" copies DSDT */
        else if (strcmp(arg, "copy_dsdt") == 0) {
                acpi_gbl_copy_dsdt_locally = 1;
        }
        /* "acpi=nocmcff" disables FF mode for corrected errors */
        else if (strcmp(arg, "nocmcff") == 0) {
                acpi_disable_cmcff = 1;
        }
        /* "acpi=spcr" adds the SPCR-provided console as a preferred one */
        else if (strcmp(arg, "spcr") == 0) {
                acpi_spcr_add = 1;
        } else {
                /* Core will printk when we return error. */
                return -EINVAL;
        }
        return 0;
}
early_param("acpi", parse_acpi);

static int __init parse_acpi_bgrt(char *arg)
{
        acpi_nobgrt = true;
        return 0;
}
early_param("bgrt_disable", parse_acpi_bgrt);

/* FIXME: Using pci= for an ACPI parameter is a travesty. */
static int __init parse_pci(char *arg)
{
        if (arg && strcmp(arg, "noacpi") == 0)
                acpi_disable_pci();
        return 0;
}
early_param("pci", parse_pci);

int __init acpi_mps_check(void)
{
#if defined(CONFIG_X86_LOCAL_APIC) && !defined(CONFIG_X86_MPPARSE)
/* mptable code is not built-in*/

        /*
         * Xen disables ACPI in PV DomU guests but it still emulates APIC and
         * supports SMP. Returning early here ensures that APIC is not disabled
         * unnecessarily and the guest is not limited to a single vCPU.
         */
        if (xen_pv_domain() && !xen_initial_domain())
                return 0;

        if (acpi_disabled || acpi_noirq) {
                pr_warn("MPS support code is not built-in, using acpi=off or acpi=noirq or pci=noacpi may have problem\n");
                return 1;
        }
#endif
        return 0;
}

#ifdef CONFIG_X86_IO_APIC
static int __init parse_acpi_skip_timer_override(char *arg)
{
        acpi_skip_timer_override = 1;
        return 0;
}
early_param("acpi_skip_timer_override", parse_acpi_skip_timer_override);

static int __init parse_acpi_use_timer_override(char *arg)
{
        acpi_use_timer_override = 1;
        return 0;
}
early_param("acpi_use_timer_override", parse_acpi_use_timer_override);
#endif /* CONFIG_X86_IO_APIC */

static int __init setup_acpi_sci(char *s)
{
        if (!s)
                return -EINVAL;
        if (!strcmp(s, "edge"))
                acpi_sci_flags =  ACPI_MADT_TRIGGER_EDGE |
                        (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK);
        else if (!strcmp(s, "level"))
                acpi_sci_flags = ACPI_MADT_TRIGGER_LEVEL |
                        (acpi_sci_flags & ~ACPI_MADT_TRIGGER_MASK);
        else if (!strcmp(s, "high"))
                acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_HIGH |
                        (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK);
        else if (!strcmp(s, "low"))
                acpi_sci_flags = ACPI_MADT_POLARITY_ACTIVE_LOW |
                        (acpi_sci_flags & ~ACPI_MADT_POLARITY_MASK);
        else
                return -EINVAL;
        return 0;
}
early_param("acpi_sci", setup_acpi_sci);

int __acpi_acquire_global_lock(unsigned int *lock)
{
        unsigned int old, new, val;

        old = READ_ONCE(*lock);
        do {
                val = (old >> 1) & 0x1;
                new = (old & ~0x3) + 2 + val;
        } while (!try_cmpxchg(lock, &old, new));

        if (val)
                return 0;

        return -1;
}

int __acpi_release_global_lock(unsigned int *lock)
{
        unsigned int old, new;

        old = READ_ONCE(*lock);
        do {
                new = old & ~0x3;
        } while (!try_cmpxchg(lock, &old, new));
        return old & 0x1;
}

void __init arch_reserve_mem_area(acpi_physical_address addr, size_t size)
{
        e820__range_add(addr, size, E820_TYPE_NVS);
        e820__update_table_print();
}

void x86_default_set_root_pointer(u64 addr)
{
        boot_params.acpi_rsdp_addr = addr;
}

u64 x86_default_get_root_pointer(void)
{
        return boot_params.acpi_rsdp_addr;
}

#ifdef CONFIG_XEN_PV
void __iomem *x86_acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
{
        return ioremap_cache(phys, size);
}

void __iomem * (*acpi_os_ioremap)(acpi_physical_address phys, acpi_size size) =
        x86_acpi_os_ioremap;
EXPORT_SYMBOL_GPL(acpi_os_ioremap);
#endif