// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Copyright 2011-2014 Freescale Semiconductor, Inc.
 * Copyright 2011 Linaro Ltd.
 */

#include <linux/clk/imx.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/genalloc.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/mfd/syscon.h>
#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/suspend.h>
#include <asm/cacheflush.h>
#include <asm/fncpy.h>
#include <asm/proc-fns.h>
#include <asm/suspend.h>
#include <asm/tlb.h>

#include "common.h"
#include "hardware.h"

#define CCR                             0x0
#define BM_CCR_WB_COUNT                 (0x7 << 16)
#define BM_CCR_RBC_BYPASS_COUNT         (0x3f << 21)
#define BM_CCR_RBC_EN                   (0x1 << 27)

#define CLPCR                           0x54
#define BP_CLPCR_LPM                    0
#define BM_CLPCR_LPM                    (0x3 << 0)
#define BM_CLPCR_BYPASS_PMIC_READY      (0x1 << 2)
#define BM_CLPCR_ARM_CLK_DIS_ON_LPM     (0x1 << 5)
#define BM_CLPCR_SBYOS                  (0x1 << 6)
#define BM_CLPCR_DIS_REF_OSC            (0x1 << 7)
#define BM_CLPCR_VSTBY                  (0x1 << 8)
#define BP_CLPCR_STBY_COUNT             9
#define BM_CLPCR_STBY_COUNT             (0x3 << 9)
#define BM_CLPCR_COSC_PWRDOWN           (0x1 << 11)
#define BM_CLPCR_WB_PER_AT_LPM          (0x1 << 16)
#define BM_CLPCR_WB_CORE_AT_LPM         (0x1 << 17)
#define BM_CLPCR_BYP_MMDC_CH0_LPM_HS    (0x1 << 19)
#define BM_CLPCR_BYP_MMDC_CH1_LPM_HS    (0x1 << 21)
#define BM_CLPCR_MASK_CORE0_WFI         (0x1 << 22)
#define BM_CLPCR_MASK_CORE1_WFI         (0x1 << 23)
#define BM_CLPCR_MASK_CORE2_WFI         (0x1 << 24)
#define BM_CLPCR_MASK_CORE3_WFI         (0x1 << 25)
#define BM_CLPCR_MASK_SCU_IDLE          (0x1 << 26)
#define BM_CLPCR_MASK_L2CC_IDLE         (0x1 << 27)

#define CGPR                            0x64
#define BM_CGPR_INT_MEM_CLK_LPM         (0x1 << 17)

#define MX6Q_SUSPEND_OCRAM_SIZE         0x1000
#define MX6_MAX_MMDC_IO_NUM             33

static void __iomem *ccm_base;
static void __iomem *suspend_ocram_base;
static void (*imx6_suspend_in_ocram_fn)(void __iomem *ocram_vbase);

/*
 * suspend ocram space layout:
 * ======================== high address ======================
 *                              .
 *                              .
 *                              .
 *                              ^
 *                              ^
 *                              ^
 *                      imx6_suspend code
 *              PM_INFO structure(imx6_cpu_pm_info)
 * ======================== low address =======================
 */

struct imx6_pm_base {
        phys_addr_t pbase;
        void __iomem *vbase;
};

struct imx6_pm_socdata {
        u32 ddr_type;
        const char *mmdc_compat;
        const char *src_compat;
        const char *iomuxc_compat;
        const char *gpc_compat;
        const char *pl310_compat;
        const u32 mmdc_io_num;
        const u32 *mmdc_io_offset;
};

static const u32 imx6q_mmdc_io_offset[] __initconst = {
        0x5ac, 0x5b4, 0x528, 0x520, /* DQM0 ~ DQM3 */
        0x514, 0x510, 0x5bc, 0x5c4, /* DQM4 ~ DQM7 */
        0x56c, 0x578, 0x588, 0x594, /* CAS, RAS, SDCLK_0, SDCLK_1 */
        0x5a8, 0x5b0, 0x524, 0x51c, /* SDQS0 ~ SDQS3 */
        0x518, 0x50c, 0x5b8, 0x5c0, /* SDQS4 ~ SDQS7 */
        0x784, 0x788, 0x794, 0x79c, /* GPR_B0DS ~ GPR_B3DS */
        0x7a0, 0x7a4, 0x7a8, 0x748, /* GPR_B4DS ~ GPR_B7DS */
        0x59c, 0x5a0, 0x750, 0x774, /* SODT0, SODT1, MODE_CTL, MODE */
        0x74c,                      /* GPR_ADDS */
};

static const u32 imx6dl_mmdc_io_offset[] __initconst = {
        0x470, 0x474, 0x478, 0x47c, /* DQM0 ~ DQM3 */
        0x480, 0x484, 0x488, 0x48c, /* DQM4 ~ DQM7 */
        0x464, 0x490, 0x4ac, 0x4b0, /* CAS, RAS, SDCLK_0, SDCLK_1 */
        0x4bc, 0x4c0, 0x4c4, 0x4c8, /* DRAM_SDQS0 ~ DRAM_SDQS3 */
        0x4cc, 0x4d0, 0x4d4, 0x4d8, /* DRAM_SDQS4 ~ DRAM_SDQS7 */
        0x764, 0x770, 0x778, 0x77c, /* GPR_B0DS ~ GPR_B3DS */
        0x780, 0x784, 0x78c, 0x748, /* GPR_B4DS ~ GPR_B7DS */
        0x4b4, 0x4b8, 0x750, 0x760, /* SODT0, SODT1, MODE_CTL, MODE */
        0x74c,                      /* GPR_ADDS */
};

static const u32 imx6sl_mmdc_io_offset[] __initconst = {
        0x30c, 0x310, 0x314, 0x318, /* DQM0 ~ DQM3 */
        0x5c4, 0x5cc, 0x5d4, 0x5d8, /* GPR_B0DS ~ GPR_B3DS */
        0x300, 0x31c, 0x338, 0x5ac, /* CAS, RAS, SDCLK_0, GPR_ADDS */
        0x33c, 0x340, 0x5b0, 0x5c0, /* SODT0, SODT1, MODE_CTL, MODE */
        0x330, 0x334, 0x320,        /* SDCKE0, SDCKE1, RESET */
};

static const u32 imx6sll_mmdc_io_offset[] __initconst = {
        0x294, 0x298, 0x29c, 0x2a0, /* DQM0 ~ DQM3 */
        0x544, 0x54c, 0x554, 0x558, /* GPR_B0DS ~ GPR_B3DS */
        0x530, 0x540, 0x2ac, 0x52c, /* MODE_CTL, MODE, SDCLK_0, GPR_ADDDS */
        0x2a4, 0x2a8,               /* SDCKE0, SDCKE1*/
};

static const u32 imx6sx_mmdc_io_offset[] __initconst = {
        0x2ec, 0x2f0, 0x2f4, 0x2f8, /* DQM0 ~ DQM3 */
        0x60c, 0x610, 0x61c, 0x620, /* GPR_B0DS ~ GPR_B3DS */
        0x300, 0x2fc, 0x32c, 0x5f4, /* CAS, RAS, SDCLK_0, GPR_ADDS */
        0x310, 0x314, 0x5f8, 0x608, /* SODT0, SODT1, MODE_CTL, MODE */
        0x330, 0x334, 0x338, 0x33c, /* SDQS0 ~ SDQS3 */
};

static const u32 imx6ul_mmdc_io_offset[] __initconst = {
        0x244, 0x248, 0x24c, 0x250, /* DQM0, DQM1, RAS, CAS */
        0x27c, 0x498, 0x4a4, 0x490, /* SDCLK0, GPR_B0DS-B1DS, GPR_ADDS */
        0x280, 0x284, 0x260, 0x264, /* SDQS0~1, SODT0, SODT1 */
        0x494, 0x4b0,               /* MODE_CTL, MODE, */
};

static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
        .mmdc_compat = "fsl,imx6q-mmdc",
        .src_compat = "fsl,imx6q-src",
        .iomuxc_compat = "fsl,imx6q-iomuxc",
        .gpc_compat = "fsl,imx6q-gpc",
        .pl310_compat = "arm,pl310-cache",
        .mmdc_io_num = ARRAY_SIZE(imx6q_mmdc_io_offset),
        .mmdc_io_offset = imx6q_mmdc_io_offset,
};

static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
        .mmdc_compat = "fsl,imx6q-mmdc",
        .src_compat = "fsl,imx6q-src",
        .iomuxc_compat = "fsl,imx6dl-iomuxc",
        .gpc_compat = "fsl,imx6q-gpc",
        .pl310_compat = "arm,pl310-cache",
        .mmdc_io_num = ARRAY_SIZE(imx6dl_mmdc_io_offset),
        .mmdc_io_offset = imx6dl_mmdc_io_offset,
};

static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
        .mmdc_compat = "fsl,imx6sl-mmdc",
        .src_compat = "fsl,imx6sl-src",
        .iomuxc_compat = "fsl,imx6sl-iomuxc",
        .gpc_compat = "fsl,imx6sl-gpc",
        .pl310_compat = "arm,pl310-cache",
        .mmdc_io_num = ARRAY_SIZE(imx6sl_mmdc_io_offset),
        .mmdc_io_offset = imx6sl_mmdc_io_offset,
};

static const struct imx6_pm_socdata imx6sll_pm_data __initconst = {
        .mmdc_compat = "fsl,imx6sll-mmdc",
        .src_compat = "fsl,imx6sll-src",
        .iomuxc_compat = "fsl,imx6sll-iomuxc",
        .gpc_compat = "fsl,imx6sll-gpc",
        .pl310_compat = "arm,pl310-cache",
        .mmdc_io_num = ARRAY_SIZE(imx6sll_mmdc_io_offset),
        .mmdc_io_offset = imx6sll_mmdc_io_offset,
};

static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
        .mmdc_compat = "fsl,imx6sx-mmdc",
        .src_compat = "fsl,imx6sx-src",
        .iomuxc_compat = "fsl,imx6sx-iomuxc",
        .gpc_compat = "fsl,imx6sx-gpc",
        .pl310_compat = "arm,pl310-cache",
        .mmdc_io_num = ARRAY_SIZE(imx6sx_mmdc_io_offset),
        .mmdc_io_offset = imx6sx_mmdc_io_offset,
};

static const struct imx6_pm_socdata imx6ul_pm_data __initconst = {
        .mmdc_compat = "fsl,imx6ul-mmdc",
        .src_compat = "fsl,imx6ul-src",
        .iomuxc_compat = "fsl,imx6ul-iomuxc",
        .gpc_compat = "fsl,imx6ul-gpc",
        .pl310_compat = NULL,
        .mmdc_io_num = ARRAY_SIZE(imx6ul_mmdc_io_offset),
        .mmdc_io_offset = imx6ul_mmdc_io_offset,
};

/*
 * This structure is for passing necessary data for low level ocram
 * suspend code(arch/arm/mach-imx/suspend-imx6.S), if this struct
 * definition is changed, the offset definition in
 * arch/arm/mach-imx/suspend-imx6.S must be also changed accordingly,
 * otherwise, the suspend to ocram function will be broken!
 */
struct imx6_cpu_pm_info {
        phys_addr_t pbase; /* The physical address of pm_info. */
        phys_addr_t resume_addr; /* The physical resume address for asm code */
        u32 ddr_type;
        u32 pm_info_size; /* Size of pm_info. */
        struct imx6_pm_base mmdc_base;
        struct imx6_pm_base src_base;
        struct imx6_pm_base iomuxc_base;
        struct imx6_pm_base ccm_base;
        struct imx6_pm_base gpc_base;
        struct imx6_pm_base l2_base;
        u32 mmdc_io_num; /* Number of MMDC IOs which need saved/restored. */
        u32 mmdc_io_val[MX6_MAX_MMDC_IO_NUM][2]; /* To save offset and value */
} __aligned(8);

void imx6_set_int_mem_clk_lpm(bool enable)
{
        u32 val = readl_relaxed(ccm_base + CGPR);

        val &= ~BM_CGPR_INT_MEM_CLK_LPM;
        if (enable)
                val |= BM_CGPR_INT_MEM_CLK_LPM;
        writel_relaxed(val, ccm_base + CGPR);
}

void imx6_enable_rbc(bool enable)
{
        u32 val;

        /*
         * need to mask all interrupts in GPC before
         * operating RBC configurations
         */
        imx_gpc_mask_all();

        /* configure RBC enable bit */
        val = readl_relaxed(ccm_base + CCR);
        val &= ~BM_CCR_RBC_EN;
        val |= enable ? BM_CCR_RBC_EN : 0;
        writel_relaxed(val, ccm_base + CCR);

        /* configure RBC count */
        val = readl_relaxed(ccm_base + CCR);
        val &= ~BM_CCR_RBC_BYPASS_COUNT;
        val |= enable ? BM_CCR_RBC_BYPASS_COUNT : 0;
        writel(val, ccm_base + CCR);

        /*
         * need to delay at least 2 cycles of CKIL(32K)
         * due to hardware design requirement, which is
         * ~61us, here we use 65us for safe
         */
        udelay(65);

        /* restore GPC interrupt mask settings */
        imx_gpc_restore_all();
}

static void imx6q_enable_wb(bool enable)
{
        u32 val;

        /* configure well bias enable bit */
        val = readl_relaxed(ccm_base + CLPCR);
        val &= ~BM_CLPCR_WB_PER_AT_LPM;
        val |= enable ? BM_CLPCR_WB_PER_AT_LPM : 0;
        writel_relaxed(val, ccm_base + CLPCR);

        /* configure well bias count */
        val = readl_relaxed(ccm_base + CCR);
        val &= ~BM_CCR_WB_COUNT;
        val |= enable ? BM_CCR_WB_COUNT : 0;
        writel_relaxed(val, ccm_base + CCR);
}

int imx6_set_lpm(enum mxc_cpu_pwr_mode mode)
{
        u32 val = readl_relaxed(ccm_base + CLPCR);

        val &= ~BM_CLPCR_LPM;
        switch (mode) {
        case WAIT_CLOCKED:
                break;
        case WAIT_UNCLOCKED:
                val |= 0x1 << BP_CLPCR_LPM;
                val |= BM_CLPCR_ARM_CLK_DIS_ON_LPM;
                break;
        case STOP_POWER_ON:
                val |= 0x2 << BP_CLPCR_LPM;
                val &= ~BM_CLPCR_VSTBY;
                val &= ~BM_CLPCR_SBYOS;
                if (cpu_is_imx6sl())
                        val |= BM_CLPCR_BYPASS_PMIC_READY;
                if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() ||
                    cpu_is_imx6ull() || cpu_is_imx6sll() || cpu_is_imx6ulz())
                        val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
                else
                        val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
                break;
        case WAIT_UNCLOCKED_POWER_OFF:
                val |= 0x1 << BP_CLPCR_LPM;
                val &= ~BM_CLPCR_VSTBY;
                val &= ~BM_CLPCR_SBYOS;
                break;
        case STOP_POWER_OFF:
                val |= 0x2 << BP_CLPCR_LPM;
                val |= 0x3 << BP_CLPCR_STBY_COUNT;
                val |= BM_CLPCR_VSTBY;
                val |= BM_CLPCR_SBYOS;
                if (cpu_is_imx6sl() || cpu_is_imx6sx())
                        val |= BM_CLPCR_BYPASS_PMIC_READY;
                if (cpu_is_imx6sl() || cpu_is_imx6sx() || cpu_is_imx6ul() ||
                    cpu_is_imx6ull() || cpu_is_imx6sll() || cpu_is_imx6ulz())
                        val |= BM_CLPCR_BYP_MMDC_CH0_LPM_HS;
                else
                        val |= BM_CLPCR_BYP_MMDC_CH1_LPM_HS;
                break;
        default:
                return -EINVAL;
        }

        /*
         * ERR007265: CCM: When improper low-power sequence is used,
         * the SoC enters low power mode before the ARM core executes WFI.
         *
         * Software workaround:
         * 1) Software should trigger IRQ #32 (IOMUX) to be always pending
         *    by setting IOMUX_GPR1_GINT.
         * 2) Software should then unmask IRQ #32 in GPC before setting CCM
         *    Low-Power mode.
         * 3) Software should mask IRQ #32 right after CCM Low-Power mode
         *    is set (set bits 0-1 of CCM_CLPCR).
         *
         * Note that IRQ #32 is GIC SPI #0.
         */
        if (mode != WAIT_CLOCKED)
                imx_gpc_hwirq_unmask(0);
        writel_relaxed(val, ccm_base + CLPCR);
        if (mode != WAIT_CLOCKED)
                imx_gpc_hwirq_mask(0);

        return 0;
}

static int imx6q_suspend_finish(unsigned long val)
{
        if (!imx6_suspend_in_ocram_fn) {
                cpu_do_idle();
        } else {
                /*
                 * call low level suspend function in ocram,
                 * as we need to float DDR IO.
                 */
                local_flush_tlb_all();
                /* check if need to flush internal L2 cache */
                if (!((struct imx6_cpu_pm_info *)
                        suspend_ocram_base)->l2_base.vbase)
                        flush_cache_all();
                imx6_suspend_in_ocram_fn(suspend_ocram_base);
        }

        return 0;
}

static int imx6q_pm_enter(suspend_state_t state)
{
        switch (state) {
        case PM_SUSPEND_STANDBY:
                imx6_set_lpm(STOP_POWER_ON);
                imx6_set_int_mem_clk_lpm(true);
                imx_gpc_pre_suspend(false);
                if (cpu_is_imx6sl())
                        imx6sl_set_wait_clk(true);
                /* Zzz ... */
                cpu_do_idle();
                if (cpu_is_imx6sl())
                        imx6sl_set_wait_clk(false);
                imx_gpc_post_resume();
                imx6_set_lpm(WAIT_CLOCKED);
                break;
        case PM_SUSPEND_MEM:
                imx6_set_lpm(STOP_POWER_OFF);
                imx6_set_int_mem_clk_lpm(false);
                imx6q_enable_wb(true);
                /*
                 * For suspend into ocram, asm code already take care of
                 * RBC setting, so we do NOT need to do that here.
                 */
                if (!imx6_suspend_in_ocram_fn)
                        imx6_enable_rbc(true);
                imx_gpc_pre_suspend(true);
                imx_anatop_pre_suspend();
                /* Zzz ... */
                cpu_suspend(0, imx6q_suspend_finish);
                if (cpu_is_imx6q() || cpu_is_imx6dl())
                        imx_smp_prepare();
                imx_anatop_post_resume();
                imx_gpc_post_resume();
                imx6_enable_rbc(false);
                imx6q_enable_wb(false);
                imx6_set_int_mem_clk_lpm(true);
                imx6_set_lpm(WAIT_CLOCKED);
                break;
        default:
                return -EINVAL;
        }

        return 0;
}

static int imx6q_pm_valid(suspend_state_t state)
{
        return (state == PM_SUSPEND_STANDBY || state == PM_SUSPEND_MEM);
}

static const struct platform_suspend_ops imx6q_pm_ops = {
        .enter = imx6q_pm_enter,
        .valid = imx6q_pm_valid,
};

static int __init imx6_pm_get_base(struct imx6_pm_base *base,
                                const char *compat)
{
        struct device_node *node;
        struct resource res;
        int ret = 0;

        node = of_find_compatible_node(NULL, NULL, compat);
        if (!node)
                return -ENODEV;

        ret = of_address_to_resource(node, 0, &res);
        if (ret)
                goto put_node;

        base->pbase = res.start;
        base->vbase = ioremap(res.start, resource_size(&res));
        if (!base->vbase)
                ret = -ENOMEM;

put_node:
        of_node_put(node);
        return ret;
}

static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata)
{
        phys_addr_t ocram_pbase;
        struct device_node *node;
        struct platform_device *pdev;
        struct imx6_cpu_pm_info *pm_info;
        struct gen_pool *ocram_pool;
        unsigned long ocram_base;
        int i, ret = 0;
        const u32 *mmdc_offset_array;

        suspend_set_ops(&imx6q_pm_ops);

        if (!socdata) {
                pr_warn("%s: invalid argument!\n", __func__);
                return -EINVAL;
        }

        node = of_find_compatible_node(NULL, NULL, "mmio-sram");
        if (!node) {
                pr_warn("%s: failed to find ocram node!\n", __func__);
                return -ENODEV;
        }

        pdev = of_find_device_by_node(node);
        if (!pdev) {
                pr_warn("%s: failed to find ocram device!\n", __func__);
                ret = -ENODEV;
                goto put_node;
        }

        ocram_pool = gen_pool_get(&pdev->dev, NULL);
        if (!ocram_pool) {
                pr_warn("%s: ocram pool unavailable!\n", __func__);
                ret = -ENODEV;
                goto put_device;
        }

        ocram_base = gen_pool_alloc(ocram_pool, MX6Q_SUSPEND_OCRAM_SIZE);
        if (!ocram_base) {
                pr_warn("%s: unable to alloc ocram!\n", __func__);
                ret = -ENOMEM;
                goto put_device;
        }

        ocram_pbase = gen_pool_virt_to_phys(ocram_pool, ocram_base);

        suspend_ocram_base = __arm_ioremap_exec(ocram_pbase,
                MX6Q_SUSPEND_OCRAM_SIZE, false);

        memset(suspend_ocram_base, 0, sizeof(*pm_info));
        pm_info = suspend_ocram_base;
        pm_info->pbase = ocram_pbase;
        pm_info->resume_addr = __pa_symbol(v7_cpu_resume);
        pm_info->pm_info_size = sizeof(*pm_info);

        /*
         * ccm physical address is not used by asm code currently,
         * so get ccm virtual address directly.
         */
        pm_info->ccm_base.vbase = ccm_base;

        ret = imx6_pm_get_base(&pm_info->mmdc_base, socdata->mmdc_compat);
        if (ret) {
                pr_warn("%s: failed to get mmdc base %d!\n", __func__, ret);
                goto put_device;
        }

        ret = imx6_pm_get_base(&pm_info->src_base, socdata->src_compat);
        if (ret) {
                pr_warn("%s: failed to get src base %d!\n", __func__, ret);
                goto src_map_failed;
        }

        ret = imx6_pm_get_base(&pm_info->iomuxc_base, socdata->iomuxc_compat);
        if (ret) {
                pr_warn("%s: failed to get iomuxc base %d!\n", __func__, ret);
                goto iomuxc_map_failed;
        }

        ret = imx6_pm_get_base(&pm_info->gpc_base, socdata->gpc_compat);
        if (ret) {
                pr_warn("%s: failed to get gpc base %d!\n", __func__, ret);
                goto gpc_map_failed;
        }

        if (socdata->pl310_compat) {
                ret = imx6_pm_get_base(&pm_info->l2_base, socdata->pl310_compat);
                if (ret) {
                        pr_warn("%s: failed to get pl310-cache base %d!\n",
                                __func__, ret);
                        goto pl310_cache_map_failed;
                }
        }

        pm_info->ddr_type = imx_mmdc_get_ddr_type();
        pm_info->mmdc_io_num = socdata->mmdc_io_num;
        mmdc_offset_array = socdata->mmdc_io_offset;

        for (i = 0; i < pm_info->mmdc_io_num; i++) {
                pm_info->mmdc_io_val[i][0] =
                        mmdc_offset_array[i];
                pm_info->mmdc_io_val[i][1] =
                        readl_relaxed(pm_info->iomuxc_base.vbase +
                        mmdc_offset_array[i]);
        }

        imx6_suspend_in_ocram_fn = fncpy(
                suspend_ocram_base + sizeof(*pm_info),
                &imx6_suspend,
                MX6Q_SUSPEND_OCRAM_SIZE - sizeof(*pm_info));

        __arm_iomem_set_ro(suspend_ocram_base, MX6Q_SUSPEND_OCRAM_SIZE);

        goto put_device;

pl310_cache_map_failed:
        iounmap(pm_info->gpc_base.vbase);
gpc_map_failed:
        iounmap(pm_info->iomuxc_base.vbase);
iomuxc_map_failed:
        iounmap(pm_info->src_base.vbase);
src_map_failed:
        iounmap(pm_info->mmdc_base.vbase);
put_device:
        put_device(&pdev->dev);
put_node:
        of_node_put(node);

        return ret;
}

static void __init imx6_pm_common_init(const struct imx6_pm_socdata
                                        *socdata)
{
        struct regmap *gpr;
        int ret;

        WARN_ON(!ccm_base);

        if (IS_ENABLED(CONFIG_SUSPEND)) {
                ret = imx6q_suspend_init(socdata);
                if (ret)
                        pr_warn("%s: No DDR LPM support with suspend %d!\n",
                                __func__, ret);
        }

        /*
         * This is for SW workaround step #1 of ERR007265, see comments
         * in imx6_set_lpm for details of this errata.
         * Force IOMUXC irq pending, so that the interrupt to GPC can be
         * used to deassert dsm_request signal when the signal gets
         * asserted unexpectedly.
         */
        gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
        if (!IS_ERR(gpr))
                regmap_update_bits(gpr, IOMUXC_GPR1, IMX6Q_GPR1_GINT,
                                   IMX6Q_GPR1_GINT);
}

static void imx6_pm_stby_poweroff(void)
{
        gic_cpu_if_down(0);
        imx6_set_lpm(STOP_POWER_OFF);
        imx6q_suspend_finish(0);

        mdelay(1000);

        pr_emerg("Unable to poweroff system\n");
}

static int imx6_pm_stby_poweroff_probe(void)
{
        if (register_platform_power_off(imx6_pm_stby_poweroff)) {
                pr_warn("%s: platform power off already claimed!\n", __func__);
                return -EBUSY;
        }

        return 0;
}

void __init imx6_pm_ccm_init(const char *ccm_compat)
{
        struct device_node *np;
        u32 val;

        np = of_find_compatible_node(NULL, NULL, ccm_compat);
        ccm_base = of_iomap(np, 0);
        BUG_ON(!ccm_base);

        /*
         * Initialize CCM_CLPCR_LPM into RUN mode to avoid ARM core
         * clock being shut down unexpectedly by WAIT mode.
         */
        val = readl_relaxed(ccm_base + CLPCR);
        val &= ~BM_CLPCR_LPM;
        writel_relaxed(val, ccm_base + CLPCR);

        if (of_property_read_bool(np, "fsl,pmic-stby-poweroff"))
                imx6_pm_stby_poweroff_probe();

        of_node_put(np);
}

void __init imx6q_pm_init(void)
{
        imx6_pm_common_init(&imx6q_pm_data);
}

void __init imx6dl_pm_init(void)
{
        imx6_pm_common_init(&imx6dl_pm_data);
}

void __init imx6sl_pm_init(void)
{
        struct regmap *gpr;

        if (cpu_is_imx6sl()) {
                imx6_pm_common_init(&imx6sl_pm_data);
        } else {
                imx6_pm_common_init(&imx6sll_pm_data);
                gpr = syscon_regmap_lookup_by_compatible("fsl,imx6q-iomuxc-gpr");
                if (!IS_ERR(gpr))
                        regmap_update_bits(gpr, IOMUXC_GPR5,
                                IMX6SLL_GPR5_AFCG_X_BYPASS_MASK, 0);
        }
}

void __init imx6sx_pm_init(void)
{
        imx6_pm_common_init(&imx6sx_pm_data);
}

void __init imx6ul_pm_init(void)
{
        imx6_pm_common_init(&imx6ul_pm_data);
}