// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Copyright 2008-2011 DENX Software Engineering GmbH
 * Author: Heiko Schocher <hs@denx.de>
 *
 * Description:
 * Keymile 83xx platform specific routines.
 */

#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/reboot.h>
#include <linux/pci.h>
#include <linux/kdev_t.h>
#include <linux/major.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/seq_file.h>
#include <linux/root_dev.h>
#include <linux/initrd.h>
#include <linux/of.h>
#include <linux/of_address.h>

#include <linux/atomic.h>
#include <linux/time.h>
#include <linux/io.h>
#include <asm/machdep.h>
#include <asm/ipic.h>
#include <asm/irq.h>
#include <asm/udbg.h>
#include <sysdev/fsl_soc.h>
#include <sysdev/fsl_pci.h>
#include <soc/fsl/qe/qe.h>

#include "mpc83xx.h"

#define SVR_REV(svr)    (((svr) >>  0) & 0xFFFF) /* Revision field */

static void __init quirk_mpc8360e_qe_enet10(void)
{
        /*
         * handle mpc8360E Erratum QE_ENET10:
         * RGMII AC values do not meet the specification
         */
        uint svid = mfspr(SPRN_SVR);
        struct  device_node *np_par;
        struct  resource res;
        void    __iomem *base;
        int     ret;

        np_par = of_find_node_by_name(NULL, "par_io");
        if (np_par == NULL) {
                pr_warn("%s couldn't find par_io node\n", __func__);
                return;
        }
        /* Map Parallel I/O ports registers */
        ret = of_address_to_resource(np_par, 0, &res);
        if (ret) {
                pr_warn("%s couldn't map par_io registers\n", __func__);
                goto out;
        }

        base = ioremap(res.start, resource_size(&res));
        if (!base)
                goto out;

        /*
         * set output delay adjustments to default values according
         * table 5 in Errata Rev. 5, 9/2011:
         *
         * write 0b01 to UCC1 bits 18:19
         * write 0b01 to UCC2 option 1 bits 4:5
         * write 0b01 to UCC2 option 2 bits 16:17
         */
        clrsetbits_be32((base + 0xa8), 0x0c00f000, 0x04005000);

        /*
         * set output delay adjustments to default values according
         * table 3-13 in Reference Manual Rev.3 05/2010:
         *
         * write 0b01 to UCC2 option 2 bits 16:17
         * write 0b0101 to UCC1 bits 20:23
         * write 0b0101 to UCC2 option 1 bits 24:27
         */
        clrsetbits_be32((base + 0xac), 0x0000cff0, 0x00004550);

        if (SVR_REV(svid) == 0x0021) {
                /*
                 * UCC2 option 1: write 0b1010 to bits 24:27
                 * at address IMMRBAR+0x14AC
                 */
                clrsetbits_be32((base + 0xac), 0x000000f0, 0x000000a0);
        } else if (SVR_REV(svid) == 0x0020) {
                /*
                 * UCC1: write 0b11 to bits 18:19
                 * at address IMMRBAR+0x14A8
                 */
                setbits32((base + 0xa8), 0x00003000);

                /*
                 * UCC2 option 1: write 0b11 to bits 4:5
                 * at address IMMRBAR+0x14A8
                 */
                setbits32((base + 0xa8), 0x0c000000);

                /*
                 * UCC2 option 2: write 0b11 to bits 16:17
                 * at address IMMRBAR+0x14AC
                 */
                setbits32((base + 0xac), 0x0000c000);
        }
        iounmap(base);
out:
        of_node_put(np_par);
}

/* ************************************************************************
 *
 * Setup the architecture
 *
 */
static void __init mpc83xx_km_setup_arch(void)
{
#ifdef CONFIG_QUICC_ENGINE
        struct device_node *np;
#endif

        mpc83xx_setup_arch();

#ifdef CONFIG_QUICC_ENGINE
        np = of_find_node_by_name(NULL, "par_io");
        if (np != NULL) {
                par_io_init(np);
                of_node_put(np);

                for_each_node_by_name(np, "spi")
                        par_io_of_config(np);

                for_each_node_by_name(np, "ucc")
                        par_io_of_config(np);

                /* Only apply this quirk when par_io is available */
                np = of_find_compatible_node(NULL, "network", "ucc_geth");
                if (np != NULL) {
                        quirk_mpc8360e_qe_enet10();
                        of_node_put(np);
                }
        }
#endif  /* CONFIG_QUICC_ENGINE */
}

machine_device_initcall(mpc83xx_km, mpc83xx_declare_of_platform_devices);

/* list of the supported boards */
static char *board[] __initdata = {
        "keymile,KMETER1",
        "keymile,kmpbec8321",
        NULL
};

/*
 * Called very early, MMU is off, device-tree isn't unflattened
 */
static int __init mpc83xx_km_probe(void)
{
        int i = 0;

        while (board[i]) {
                if (of_machine_is_compatible(board[i]))
                        break;
                i++;
        }
        return (board[i] != NULL);
}

define_machine(mpc83xx_km) {
        .name           = "mpc83xx-km-platform",
        .probe          = mpc83xx_km_probe,
        .setup_arch     = mpc83xx_km_setup_arch,
        .discover_phbs  = mpc83xx_setup_pci,
        .init_IRQ       = mpc83xx_ipic_init_IRQ,
        .get_irq        = ipic_get_irq,
        .restart        = mpc83xx_restart,
        .time_init      = mpc83xx_time_init,
        .progress       = udbg_progress,
};