arch/alpha/include/asm/pgtable.h
361
printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
arch/alpha/include/asm/pgtable.h
363
printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
arch/alpha/include/asm/pgtable.h
365
printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
arch/alpha/kernel/console.c
90
printk("Console graphics on hose %d\n", h);
arch/alpha/kernel/core_cia.c
1021
printk(KERN_CRIT " Memory port command: %s\n", mem_port_cmd);
arch/alpha/kernel/core_cia.c
1022
printk(KERN_CRIT " Memory port address: %#010lx, mask: %#lx\n",
arch/alpha/kernel/core_cia.c
1024
printk(KERN_CRIT " Memory sequencer state: %s\n", seq_state);
arch/alpha/kernel/core_cia.c
1025
printk(KERN_CRIT " Memory set: %s\n", set_select);
arch/alpha/kernel/core_cia.c
1071
printk (fmt, syn, i);
arch/alpha/kernel/core_cia.c
1096
printk(KERN_CRIT "CIA machine check: System bus parity error\n");
arch/alpha/kernel/core_cia.c
1097
printk(KERN_CRIT " Command: %s, Parity bit: %d\n", cmd, par);
arch/alpha/kernel/core_cia.c
1098
printk(KERN_CRIT " Address: %#010lx, Mask: %#lx\n", addr, mask);
arch/alpha/kernel/core_cia.c
1159
printk(KERN_CRIT "CIA lost machine check: "
arch/alpha/kernel/core_cia.c
1162
printk(KERN_CRIT "CIA lost machine check: "
arch/alpha/kernel/core_cia.c
1165
printk(KERN_CRIT "CIA lost machine check: "
arch/alpha/kernel/core_cia.c
1168
printk(KERN_CRIT "CIA lost machine check: "
arch/alpha/kernel/core_cia.c
1171
printk(KERN_CRIT "CIA lost machine check: "
arch/alpha/kernel/core_cia.c
1174
printk(KERN_CRIT "CIA lost machine check: "
arch/alpha/kernel/core_cia.c
1177
printk(KERN_CRIT "CIA lost machine check: "
arch/alpha/kernel/core_cia.c
1180
printk(KERN_CRIT "CIA lost machine check: "
arch/alpha/kernel/core_cia.c
1183
printk(KERN_CRIT "CIA lost machine check: "
arch/alpha/kernel/core_cia.c
1186
printk(KERN_CRIT "CIA lost machine check: "
arch/alpha/kernel/core_cia.c
1189
printk(KERN_CRIT "CIA lost machine check: "
arch/alpha/kernel/core_cia.c
403
printk("pci: failed tb register update test "
arch/alpha/kernel/core_cia.c
409
printk("pci: failed tb register update test "
arch/alpha/kernel/core_cia.c
41
# define DBGC(args) printk args
arch/alpha/kernel/core_cia.c
415
printk("pci: failed tb register update test "
arch/alpha/kernel/core_cia.c
419
printk("pci: passed tb register update test\n");
arch/alpha/kernel/core_cia.c
433
printk("pci: failed sg loopback i/o read test (mcheck)\n");
arch/alpha/kernel/core_cia.c
437
printk("pci: failed sg loopback i/o read test "
arch/alpha/kernel/core_cia.c
441
printk("pci: passed sg loopback i/o read test\n");
arch/alpha/kernel/core_cia.c
450
printk("pci: failed tbia test; workaround available\n");
arch/alpha/kernel/core_cia.c
452
printk("pci: passed tbia test\n");
arch/alpha/kernel/core_cia.c
470
printk("pci: failed pte write cache snoop test (mcheck)\n");
arch/alpha/kernel/core_cia.c
474
printk("pci: failed pte write cache snoop test "
arch/alpha/kernel/core_cia.c
478
printk("pci: passed pte write cache snoop test\n");
arch/alpha/kernel/core_cia.c
494
printk("pci: failed valid tag invalid pte reload test "
arch/alpha/kernel/core_cia.c
500
printk("pci: failed valid tag invalid pte reload test "
arch/alpha/kernel/core_cia.c
504
printk("pci: passed valid tag invalid pte reload test\n");
arch/alpha/kernel/core_cia.c
517
printk("pci: %s pci machine check test\n",
arch/alpha/kernel/core_cia.c
534
printk("pci: tbia workaround enabled\n");
arch/alpha/kernel/core_cia.c
551
printk("pci: disabling sg translation window\n");
arch/alpha/kernel/core_cia.c
637
printk("pci: cia revision %d%s\n",
arch/alpha/kernel/core_cia.c
699
printk(KERN_ERR "Failed to request HAE_MEM\n");
arch/alpha/kernel/core_cia.c
873
printk(KERN_CRIT "CIA machine check: %s\n", msg);
arch/alpha/kernel/core_cia.c
874
printk(KERN_CRIT " DMA command: %s\n", cmd);
arch/alpha/kernel/core_cia.c
875
printk(KERN_CRIT " PCI address: %#010lx\n", addr);
arch/alpha/kernel/core_cia.c
876
printk(KERN_CRIT " %s, Lock: %d, DAC: %d\n",
arch/alpha/kernel/core_cia.c
917
printk(KERN_CRIT "CIA machine check: %s\n", msg);
arch/alpha/kernel/core_cia.c
918
printk(KERN_CRIT " PCI command: %s\n", cmd);
arch/alpha/kernel/core_cia.c
919
printk(KERN_CRIT " Master state: %s, Target state: %s\n",
arch/alpha/kernel/core_cia.c
921
printk(KERN_CRIT " PCI address: %#010lx, DAC: %d\n",
arch/alpha/kernel/core_cia.c
924
printk(KERN_CRIT "CIA machine check: %s\n", msg);
arch/alpha/kernel/core_cia.c
925
printk(KERN_CRIT " Unknown PCI error\n");
arch/alpha/kernel/core_cia.c
926
printk(KERN_CRIT " PCI_ERR0 = %#08lx", cia->pci_err0);
arch/alpha/kernel/core_cia.c
927
printk(KERN_CRIT " PCI_ERR1 = %#08lx", cia->pci_err1);
arch/alpha/kernel/core_cia.c
928
printk(KERN_CRIT " PCI_ERR2 = %#08lx", cia->pci_err2);
arch/alpha/kernel/core_cia.c
946
printk(KERN_CRIT "CIA machine check: %s\n", msg);
arch/alpha/kernel/core_irongate.c
172
printk("Iron stat_cmd %x\n", IRONGATE_jd);
arch/alpha/kernel/core_irongate.c
178
printk("Iron ECC %x\n", IRONGATE_jd);
arch/alpha/kernel/core_irongate.c
219
printk(KERN_WARNING "WARNING! Upgrade to SRM A5.6-19 "
arch/alpha/kernel/core_irongate.c
237
printk("irongate_init_arch: initrd too big "
arch/alpha/kernel/core_irongate.c
243
printk("irongate_init_arch: temporarily reserving "
arch/alpha/kernel/core_irongate.c
352
printk("AGP ioremap failed... addr not page aligned (0x%lx)\n",
arch/alpha/kernel/core_irongate.c
360
printk("irongate_ioremap(0x%lx, 0x%lx)\n", addr, size);
arch/alpha/kernel/core_irongate.c
361
printk("irongate_ioremap: gart_bus_addr 0x%lx\n", gart_bus_addr);
arch/alpha/kernel/core_irongate.c
362
printk("irongate_ioremap: gart_aper_size 0x%lx\n", gart_aper_size);
arch/alpha/kernel/core_irongate.c
363
printk("irongate_ioremap: mmio_regs %p\n", mmio_regs);
arch/alpha/kernel/core_irongate.c
364
printk("irongate_ioremap: gatt_pages %p\n", gatt_pages);
arch/alpha/kernel/core_irongate.c
370
printk("irongate_ioremap: cur_gatt %p pte 0x%x\n",
arch/alpha/kernel/core_irongate.c
39
# define DBG_CFG(args) printk args
arch/alpha/kernel/core_irongate.c
390
printk("AGP ioremap: FAILED to map...\n");
arch/alpha/kernel/core_irongate.c
400
printk("irongate_ioremap(0x%lx, 0x%lx) returning 0x%lx\n",
arch/alpha/kernel/core_marvel.c
1002
printk("%s: pte not valid\n", __func__);
arch/alpha/kernel/core_marvel.c
1052
printk("MARVEL - using hose %d as AGP\n", hose->index);
arch/alpha/kernel/core_marvel.c
118
printk(KERN_WARNING "IO7 at PE %d already allocated!\n", pe);
arch/alpha/kernel/core_marvel.c
143
printk(KERN_ERR "Too many IO7s at PE %d\n",
arch/alpha/kernel/core_marvel.c
157
printk(KERN_WARNING "Failed to insert IO7 at PE %d "
arch/alpha/kernel/core_marvel.c
255
printk(KERN_ERR "Failed to request IO on hose %d\n",
arch/alpha/kernel/core_marvel.c
258
printk(KERN_ERR "Failed to request MEM on hose %d\n",
arch/alpha/kernel/core_marvel.c
322
printk("FIXME: disabling master aborts\n");
arch/alpha/kernel/core_marvel.c
336
printk("Initializing IO7 at PID %d\n", io7->pe);
arch/alpha/kernel/core_marvel.c
365
printk("Found an IO7 at PID %d\n", pe);
arch/alpha/kernel/core_marvel.c
387
printk("console graphics is on hose %d (console)\n", h);
arch/alpha/kernel/core_marvel.c
40
# define DBG_CFG(args) printk args
arch/alpha/kernel/core_marvel.c
403
printk("Console graphics on hose %d\n", hose->index);
arch/alpha/kernel/core_marvel.c
430
printk("User-specified IO7 at PID %lu\n", pid);
arch/alpha/kernel/core_marvel.c
669
printk(KERN_WARNING "Illegal RTC port %lx\n", addr);
arch/alpha/kernel/core_marvel.c
748
printk("ioremap failed... pte not valid...\n");
arch/alpha/kernel/core_marvel.c
757
printk("FAILED to map...\n");
arch/alpha/kernel/core_marvel.c
873
printk(KERN_ERR "Failed to reserve AGP memory\n");
arch/alpha/kernel/core_marvel.c
894
printk(KERN_WARNING
arch/alpha/kernel/core_marvel.c
901
printk(KERN_ERR "Failed to release AGP memory\n");
arch/alpha/kernel/core_marvel.c
945
printk("%s: unknown PLL setting RNGB=%lx (PLL6_CTL=%016lx)\n",
arch/alpha/kernel/core_marvel.c
954
printk("Requested AGP Rate %dX not compatible "
arch/alpha/kernel/core_marvel.c
962
printk("Enabling AGP on hose %d: %dX%s RQ %d\n",
arch/alpha/kernel/core_marvel.c
996
printk("%s: addr out of range\n", __func__);
arch/alpha/kernel/core_mcpcia.c
327
printk(KERN_ERR "Failed to request IO on hose %d\n", h);
arch/alpha/kernel/core_mcpcia.c
329
printk(KERN_ERR "Failed to request MEM on hose %d\n", h);
arch/alpha/kernel/core_mcpcia.c
331
printk(KERN_ERR "Failed to request HAE_MEM on hose %d\n", h);
arch/alpha/kernel/core_mcpcia.c
39
# define DBG_CFG(args) printk args
arch/alpha/kernel/core_mcpcia.c
437
printk("mcpcia_init_hoses: found %d hoses\n", hose_count);
arch/alpha/kernel/core_mcpcia.c
454
printk(" paltmp[%d-%d] = %16lx %16lx\n",
arch/alpha/kernel/core_mcpcia.c
458
printk(" shadow[%d-%d] = %16lx %16lx\n",
arch/alpha/kernel/core_mcpcia.c
462
printk(" Addr of excepting instruction = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
464
printk(" Summary of arithmetic traps = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
466
printk(" Exception mask = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
468
printk(" Base address for PALcode = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
470
printk(" Interrupt Status Reg = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
472
printk(" CURRENT SETUP OF EV5 IBOX = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
474
printk(" I-CACHE Reg %s parity error = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
478
printk(" D-CACHE error Reg = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
483
printk(" Data error in bank 1\n");
arch/alpha/kernel/core_mcpcia.c
486
printk(" Data error in bank 0\n");
arch/alpha/kernel/core_mcpcia.c
489
printk(" Tag error in bank 1\n");
arch/alpha/kernel/core_mcpcia.c
492
printk(" Tag error in bank 0\n");
arch/alpha/kernel/core_mcpcia.c
496
printk(" Effective VA = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
498
printk(" Reason for D-stream = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
500
printk(" EV5 SCache address = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
502
printk(" EV5 SCache TAG/Data parity = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
504
printk(" EV5 BC_TAG_ADDR = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
506
printk(" EV5 EI_ADDR: Phys addr of Xfer = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
508
printk(" Fill Syndrome = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
510
printk(" EI_STAT reg = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
512
printk(" LD_LOCK = %16lx\n",
arch/alpha/kernel/core_mcpcia.c
553
printk("IOD %d Register Subpacket - Bridge Base Address %16lx\n",
arch/alpha/kernel/core_mcpcia.c
555
printk(" WHOAMI = %8x\n", iodpp->whoami);
arch/alpha/kernel/core_mcpcia.c
556
printk(" PCI_REV = %8x\n", iodpp->pci_rev);
arch/alpha/kernel/core_mcpcia.c
557
printk(" CAP_CTRL = %8x\n", iodpp->cap_ctrl);
arch/alpha/kernel/core_mcpcia.c
558
printk(" HAE_MEM = %8x\n", iodpp->hae_mem);
arch/alpha/kernel/core_mcpcia.c
559
printk(" HAE_IO = %8x\n", iodpp->hae_io);
arch/alpha/kernel/core_mcpcia.c
560
printk(" INT_CTL = %8x\n", iodpp->int_ctl);
arch/alpha/kernel/core_mcpcia.c
561
printk(" INT_REG = %8x\n", iodpp->int_reg);
arch/alpha/kernel/core_mcpcia.c
562
printk(" INT_MASK0 = %8x\n", iodpp->int_mask0);
arch/alpha/kernel/core_mcpcia.c
563
printk(" INT_MASK1 = %8x\n", iodpp->int_mask1);
arch/alpha/kernel/core_mcpcia.c
564
printk(" MC_ERR0 = %8x\n", iodpp->mc_err0);
arch/alpha/kernel/core_mcpcia.c
565
printk(" MC_ERR1 = %8x\n", iodpp->mc_err1);
arch/alpha/kernel/core_mcpcia.c
566
printk(" CAP_ERR = %8x\n", iodpp->cap_err);
arch/alpha/kernel/core_mcpcia.c
567
printk(" PCI_ERR1 = %8x\n", iodpp->pci_err1);
arch/alpha/kernel/core_mcpcia.c
568
printk(" MDPA_STAT = %8x\n", iodpp->mdpa_stat);
arch/alpha/kernel/core_mcpcia.c
569
printk(" MDPA_SYN = %8x\n", iodpp->mdpa_syn);
arch/alpha/kernel/core_mcpcia.c
570
printk(" MDPB_STAT = %8x\n", iodpp->mdpb_stat);
arch/alpha/kernel/core_mcpcia.c
571
printk(" MDPB_SYN = %8x\n", iodpp->mdpb_syn);
arch/alpha/kernel/core_polaris.c
156
printk("polaris_init_arch(): trusting firmware for setup\n");
arch/alpha/kernel/core_polaris.c
30
# define DBG_CFG(args) printk args
arch/alpha/kernel/core_t2.c
340
printk("%s: setting WBASE1=0x%lx WMASK1=0x%lx TBASE1=0x%lx\n",
arch/alpha/kernel/core_t2.c
367
printk("%s: setting WBASE2=0x%lx WMASK2=0x%lx TBASE2=0x%lx\n",
arch/alpha/kernel/core_t2.c
376
printk("%s: HAE_1 was 0x%lx\n", __func__, srm_hae); /* HW is 0 */
arch/alpha/kernel/core_t2.c
377
printk("%s: HAE_2 was 0x%lx\n", __func__, *(vulp)T2_HAE_2);
arch/alpha/kernel/core_t2.c
378
printk("%s: HAE_3 was 0x%lx\n", __func__, *(vulp)T2_HAE_3);
arch/alpha/kernel/core_t2.c
379
printk("%s: HAE_4 was 0x%lx\n", __func__, *(vulp)T2_HAE_4);
arch/alpha/kernel/core_t2.c
380
printk("%s: HBASE was 0x%lx\n", __func__, *(vulp)T2_HBASE);
arch/alpha/kernel/core_t2.c
382
printk("%s: WBASE1=0x%lx WMASK1=0x%lx TBASE1=0x%lx\n", __func__,
arch/alpha/kernel/core_t2.c
384
printk("%s: WBASE2=0x%lx WMASK2=0x%lx TBASE2=0x%lx\n", __func__,
arch/alpha/kernel/core_t2.c
423
printk("t2_init_arch: enabling SG TLB, IOCSR was 0x%lx\n",
arch/alpha/kernel/core_t2.c
442
printk(KERN_ERR "Failed to request HAE_MEM\n");
arch/alpha/kernel/core_t2.c
585
printk("t2_machine_check(cpu%d): any_expected 0x%x -"
arch/alpha/kernel/core_t2.c
598
printk("t2_machine_check(cpu%d): last_taken 0x%x - "
arch/alpha/kernel/core_t2.c
615
printk("%s t2_mcheck(cpu%d): last_taken 0x%x - "
arch/alpha/kernel/core_t2.c
74
# define DBG(args) printk args
arch/alpha/kernel/core_titan.c
285
printk(KERN_ERR "Failed to request IO on hose %d\n", index);
arch/alpha/kernel/core_titan.c
287
printk(KERN_ERR "Failed to request MEM on hose %d\n", index);
arch/alpha/kernel/core_titan.c
370
printk("%s: titan_init_arch()\n", __func__);
arch/alpha/kernel/core_titan.c
371
printk("%s: CChip registers:\n", __func__);
arch/alpha/kernel/core_titan.c
372
printk("%s: CSR_CSC 0x%lx\n", __func__, TITAN_cchip->csc.csr);
arch/alpha/kernel/core_titan.c
373
printk("%s: CSR_MTR 0x%lx\n", __func__, TITAN_cchip->mtr.csr);
arch/alpha/kernel/core_titan.c
374
printk("%s: CSR_MISC 0x%lx\n", __func__, TITAN_cchip->misc.csr);
arch/alpha/kernel/core_titan.c
375
printk("%s: CSR_DIM0 0x%lx\n", __func__, TITAN_cchip->dim0.csr);
arch/alpha/kernel/core_titan.c
376
printk("%s: CSR_DIM1 0x%lx\n", __func__, TITAN_cchip->dim1.csr);
arch/alpha/kernel/core_titan.c
377
printk("%s: CSR_DIR0 0x%lx\n", __func__, TITAN_cchip->dir0.csr);
arch/alpha/kernel/core_titan.c
378
printk("%s: CSR_DIR1 0x%lx\n", __func__, TITAN_cchip->dir1.csr);
arch/alpha/kernel/core_titan.c
379
printk("%s: CSR_DRIR 0x%lx\n", __func__, TITAN_cchip->drir.csr);
arch/alpha/kernel/core_titan.c
381
printk("%s: DChip registers:\n", __func__);
arch/alpha/kernel/core_titan.c
382
printk("%s: CSR_DSC 0x%lx\n", __func__, TITAN_dchip->dsc.csr);
arch/alpha/kernel/core_titan.c
383
printk("%s: CSR_STR 0x%lx\n", __func__, TITAN_dchip->str.csr);
arch/alpha/kernel/core_titan.c
384
printk("%s: CSR_DREV 0x%lx\n", __func__, TITAN_dchip->drev.csr);
arch/alpha/kernel/core_titan.c
50
# define DBG_CFG(args) printk args
arch/alpha/kernel/core_titan.c
514
printk("ioremap failed... no vm_area...\n");
arch/alpha/kernel/core_titan.c
524
printk("ioremap failed... pte not valid...\n");
arch/alpha/kernel/core_titan.c
533
printk("FAILED to remap_area_pages...\n");
arch/alpha/kernel/core_titan.c
606
printk(KERN_ERR "Failed to reserve AGP memory\n");
arch/alpha/kernel/core_titan.c
627
printk(KERN_WARNING
arch/alpha/kernel/core_titan.c
634
printk(KERN_ERR "Failed to release AGP memory\n");
arch/alpha/kernel/core_titan.c
669
printk("Enabling AGP: %dX%s\n",
arch/alpha/kernel/core_titan.c
707
printk("%s: addr out of range\n", __func__);
arch/alpha/kernel/core_titan.c
713
printk("%s: pte not valid\n", __func__);
arch/alpha/kernel/core_tsunami.c
217
printk("dont_care == 0x%lx\n", dont_care);
arch/alpha/kernel/core_tsunami.c
235
printk("tsunami_probe_write: unit %d at 0x%016lx\n", source,
arch/alpha/kernel/core_tsunami.c
285
printk(KERN_ERR "Failed to request IO on hose %d\n", index);
arch/alpha/kernel/core_tsunami.c
287
printk(KERN_ERR "Failed to request MEM on hose %d\n", index);
arch/alpha/kernel/core_tsunami.c
388
printk("%s: probing bogus address: 0x%016lx\n", __func__, bogus_addr);
arch/alpha/kernel/core_tsunami.c
389
printk("\tprobe %s\n",
arch/alpha/kernel/core_tsunami.c
395
printk("%s: CChip registers:\n", __func__);
arch/alpha/kernel/core_tsunami.c
396
printk("%s: CSR_CSC 0x%lx\n", __func__, TSUNAMI_cchip->csc.csr);
arch/alpha/kernel/core_tsunami.c
397
printk("%s: CSR_MTR 0x%lx\n", __func__, TSUNAMI_cchip.mtr.csr);
arch/alpha/kernel/core_tsunami.c
398
printk("%s: CSR_MISC 0x%lx\n", __func__, TSUNAMI_cchip->misc.csr);
arch/alpha/kernel/core_tsunami.c
399
printk("%s: CSR_DIM0 0x%lx\n", __func__, TSUNAMI_cchip->dim0.csr);
arch/alpha/kernel/core_tsunami.c
400
printk("%s: CSR_DIM1 0x%lx\n", __func__, TSUNAMI_cchip->dim1.csr);
arch/alpha/kernel/core_tsunami.c
401
printk("%s: CSR_DIR0 0x%lx\n", __func__, TSUNAMI_cchip->dir0.csr);
arch/alpha/kernel/core_tsunami.c
402
printk("%s: CSR_DIR1 0x%lx\n", __func__, TSUNAMI_cchip->dir1.csr);
arch/alpha/kernel/core_tsunami.c
403
printk("%s: CSR_DRIR 0x%lx\n", __func__, TSUNAMI_cchip->drir.csr);
arch/alpha/kernel/core_tsunami.c
405
printk("%s: DChip registers:\n");
arch/alpha/kernel/core_tsunami.c
406
printk("%s: CSR_DSC 0x%lx\n", __func__, TSUNAMI_dchip->dsc.csr);
arch/alpha/kernel/core_tsunami.c
407
printk("%s: CSR_STR 0x%lx\n", __func__, TSUNAMI_dchip->str.csr);
arch/alpha/kernel/core_tsunami.c
408
printk("%s: CSR_DREV 0x%lx\n", __func__, TSUNAMI_dchip->drev.csr);
arch/alpha/kernel/core_tsunami.c
51
# define DBG_CFG(args) printk args
arch/alpha/kernel/core_wildfire.c
195
printk(KERN_ERR "fast QSD_WHAMI at base %p is 0x%lx\n", fast, temp);
arch/alpha/kernel/core_wildfire.c
222
printk(KERN_ERR "QSA_QBB_ID at base %p is 0x%lx\n", qsa, temp);
arch/alpha/kernel/core_wildfire.c
234
printk(KERN_ERR "GPA_QBB_MAP[%d] at base %p is 0x%lx\n",
arch/alpha/kernel/core_wildfire.c
256
printk(KERN_ERR "QSD_WHAMI at base %p is 0x%lx\n", qsd, temp);
arch/alpha/kernel/core_wildfire.c
265
printk(KERN_ERR "QSA_QBB_POP_0 at base %p is 0x%lx\n", qsa, temp);
arch/alpha/kernel/core_wildfire.c
272
printk(KERN_ERR "QSA_QBB_POP_1 at base %p is 0x%lx\n", qsa, temp);
arch/alpha/kernel/core_wildfire.c
279
printk(KERN_ERR "QSA_QBB_ID at %p is 0x%lx\n", qsa, temp);
arch/alpha/kernel/core_wildfire.c
31
# define DBG_CFG(args) printk args
arch/alpha/kernel/core_wildfire.c
451
printk(KERN_ERR "PCI registers for QBB %d hose %d (%p)\n",
arch/alpha/kernel/core_wildfire.c
454
printk(KERN_ERR " PCI_IO_ADDR_EXT: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
456
printk(KERN_ERR " PCI_CTRL: 0x%16lx\n", pci->pci_ctrl.csr);
arch/alpha/kernel/core_wildfire.c
457
printk(KERN_ERR " PCI_ERR_SUM: 0x%16lx\n", pci->pci_err_sum.csr);
arch/alpha/kernel/core_wildfire.c
458
printk(KERN_ERR " PCI_ERR_ADDR: 0x%16lx\n", pci->pci_err_addr.csr);
arch/alpha/kernel/core_wildfire.c
459
printk(KERN_ERR " PCI_STALL_CNT: 0x%16lx\n", pci->pci_stall_cnt.csr);
arch/alpha/kernel/core_wildfire.c
460
printk(KERN_ERR " PCI_PEND_INT: 0x%16lx\n", pci->pci_pend_int.csr);
arch/alpha/kernel/core_wildfire.c
461
printk(KERN_ERR " PCI_SENT_INT: 0x%16lx\n", pci->pci_sent_int.csr);
arch/alpha/kernel/core_wildfire.c
463
printk(KERN_ERR " DMA window registers for QBB %d hose %d (%p)\n",
arch/alpha/kernel/core_wildfire.c
466
printk(KERN_ERR " window %d: 0x%16lx 0x%16lx 0x%16lx\n", i,
arch/alpha/kernel/core_wildfire.c
471
printk(KERN_ERR "\n");
arch/alpha/kernel/core_wildfire.c
480
printk(KERN_ERR "PCA registers for QBB %d PCA %d (%p)\n",
arch/alpha/kernel/core_wildfire.c
483
printk(KERN_ERR " PCA_WHAT_AM_I: 0x%16lx\n", pca->pca_what_am_i.csr);
arch/alpha/kernel/core_wildfire.c
484
printk(KERN_ERR " PCA_ERR_SUM: 0x%16lx\n", pca->pca_err_sum.csr);
arch/alpha/kernel/core_wildfire.c
485
printk(KERN_ERR " PCA_PEND_INT: 0x%16lx\n", pca->pca_pend_int.csr);
arch/alpha/kernel/core_wildfire.c
486
printk(KERN_ERR " PCA_SENT_INT: 0x%16lx\n", pca->pca_sent_int.csr);
arch/alpha/kernel/core_wildfire.c
487
printk(KERN_ERR " PCA_STDIO_EL: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
490
printk(KERN_ERR " PCA target registers for QBB %d PCA %d (%p)\n",
arch/alpha/kernel/core_wildfire.c
493
printk(KERN_ERR " target %d: 0x%16lx 0x%16lx\n", i,
arch/alpha/kernel/core_wildfire.c
498
printk(KERN_ERR "\n");
arch/alpha/kernel/core_wildfire.c
507
printk(KERN_ERR "QSA registers for QBB %d (%p)\n", qbbno, qsa);
arch/alpha/kernel/core_wildfire.c
509
printk(KERN_ERR " QSA_QBB_ID: 0x%16lx\n", qsa->qsa_qbb_id.csr);
arch/alpha/kernel/core_wildfire.c
510
printk(KERN_ERR " QSA_PORT_ENA: 0x%16lx\n", qsa->qsa_port_ena.csr);
arch/alpha/kernel/core_wildfire.c
511
printk(KERN_ERR " QSA_REF_INT: 0x%16lx\n", qsa->qsa_ref_int.csr);
arch/alpha/kernel/core_wildfire.c
514
printk(KERN_ERR " QSA_CONFIG_%d: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
518
printk(KERN_ERR " QSA_QBB_POP_%d: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
521
printk(KERN_ERR "\n");
arch/alpha/kernel/core_wildfire.c
529
printk(KERN_ERR "QSD registers for QBB %d (%p)\n", qbbno, qsd);
arch/alpha/kernel/core_wildfire.c
531
printk(KERN_ERR " QSD_WHAMI: 0x%16lx\n", qsd->qsd_whami.csr);
arch/alpha/kernel/core_wildfire.c
532
printk(KERN_ERR " QSD_REV: 0x%16lx\n", qsd->qsd_rev.csr);
arch/alpha/kernel/core_wildfire.c
533
printk(KERN_ERR " QSD_PORT_PRESENT: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
535
printk(KERN_ERR " QSD_PORT_ACTIVE: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
537
printk(KERN_ERR " QSD_FAULT_ENA: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
539
printk(KERN_ERR " QSD_CPU_INT_ENA: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
541
printk(KERN_ERR " QSD_MEM_CONFIG: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
543
printk(KERN_ERR " QSD_ERR_SUM: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
546
printk(KERN_ERR "\n");
arch/alpha/kernel/core_wildfire.c
555
printk(KERN_ERR "IOP registers for QBB %d (%p)\n", qbbno, iop);
arch/alpha/kernel/core_wildfire.c
557
printk(KERN_ERR " IOA_CONFIG: 0x%16lx\n", iop->ioa_config.csr);
arch/alpha/kernel/core_wildfire.c
558
printk(KERN_ERR " IOD_CONFIG: 0x%16lx\n", iop->iod_config.csr);
arch/alpha/kernel/core_wildfire.c
559
printk(KERN_ERR " IOP_SWITCH_CREDITS: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
561
printk(KERN_ERR " IOP_HOSE_CREDITS: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
565
printk(KERN_ERR " IOP_HOSE_%d_INIT: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
568
printk(KERN_ERR " IOP_DEV_INT_TARGET_%d: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
571
printk(KERN_ERR "\n");
arch/alpha/kernel/core_wildfire.c
580
printk(KERN_ERR "GP registers for QBB %d (%p)\n", qbbno, gp);
arch/alpha/kernel/core_wildfire.c
582
printk(KERN_ERR " GPA_QBB_MAP_%d: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
585
printk(KERN_ERR " GPA_MEM_POP_MAP: 0x%16lx\n",
arch/alpha/kernel/core_wildfire.c
587
printk(KERN_ERR " GPA_SCRATCH: 0x%16lx\n", gp->gpa_scratch.csr);
arch/alpha/kernel/core_wildfire.c
588
printk(KERN_ERR " GPA_DIAG: 0x%16lx\n", gp->gpa_diag.csr);
arch/alpha/kernel/core_wildfire.c
589
printk(KERN_ERR " GPA_CONFIG_0: 0x%16lx\n", gp->gpa_config_0.csr);
arch/alpha/kernel/core_wildfire.c
590
printk(KERN_ERR " GPA_INIT_ID: 0x%16lx\n", gp->gpa_init_id.csr);
arch/alpha/kernel/core_wildfire.c
591
printk(KERN_ERR " GPA_CONFIG_2: 0x%16lx\n", gp->gpa_config_2.csr);
arch/alpha/kernel/core_wildfire.c
593
printk(KERN_ERR "\n");
arch/alpha/kernel/core_wildfire.c
603
printk(KERN_ERR "Probed Hardware Configuration\n");
arch/alpha/kernel/core_wildfire.c
605
printk(KERN_ERR " hard_qbb_mask: 0x%16lx\n", wildfire_hard_qbb_mask);
arch/alpha/kernel/core_wildfire.c
606
printk(KERN_ERR " soft_qbb_mask: 0x%16lx\n", wildfire_soft_qbb_mask);
arch/alpha/kernel/core_wildfire.c
608
printk(KERN_ERR " gp_mask: 0x%16lx\n", wildfire_gp_mask);
arch/alpha/kernel/core_wildfire.c
609
printk(KERN_ERR " hs_mask: 0x%16lx\n", wildfire_hs_mask);
arch/alpha/kernel/core_wildfire.c
610
printk(KERN_ERR " iop_mask: 0x%16lx\n", wildfire_iop_mask);
arch/alpha/kernel/core_wildfire.c
611
printk(KERN_ERR " ior_mask: 0x%16lx\n", wildfire_ior_mask);
arch/alpha/kernel/core_wildfire.c
612
printk(KERN_ERR " pca_mask: 0x%16lx\n", wildfire_pca_mask);
arch/alpha/kernel/core_wildfire.c
614
printk(KERN_ERR " cpu_mask: 0x%16lx\n", wildfire_cpu_mask);
arch/alpha/kernel/core_wildfire.c
615
printk(KERN_ERR " mem_mask: 0x%16lx\n", wildfire_mem_mask);
arch/alpha/kernel/core_wildfire.c
617
printk(" hard_qbb_map: ");
arch/alpha/kernel/core_wildfire.c
620
printk("--- ");
arch/alpha/kernel/core_wildfire.c
622
printk("%3d ", wildfire_hard_qbb_map[i]);
arch/alpha/kernel/core_wildfire.c
623
printk("\n");
arch/alpha/kernel/core_wildfire.c
625
printk(" soft_qbb_map: ");
arch/alpha/kernel/core_wildfire.c
628
printk("--- ");
arch/alpha/kernel/core_wildfire.c
630
printk("%3d ", wildfire_soft_qbb_map[i]);
arch/alpha/kernel/core_wildfire.c
631
printk("\n");
arch/alpha/kernel/core_wildfire.c
92
printk(KERN_ERR "Failed to request IO on qbb %d hose %d\n",
arch/alpha/kernel/core_wildfire.c
95
printk(KERN_ERR "Failed to request MEM on qbb %d hose %d\n",
arch/alpha/kernel/err_common.c
132
printk("%s** Unknown header - CLASS %d TYPE %d, aborting\n",
arch/alpha/kernel/err_common.c
138
printk("%s*** %s:\n"
arch/alpha/kernel/err_common.c
172
printk("%s TIMESTAMP: %d/%d/%02d %d:%02d:%0d\n",
arch/alpha/kernel/err_common.c
189
printk("%sPROCESSING SUBPACKET %d\n", err_print_prefix, i);
arch/alpha/kernel/err_common.c
208
printk("%s** Unexpected header CLASS %d TYPE %d"
arch/alpha/kernel/err_common.c
233
printk("%s %s\n", err_print_prefix, a->description);
arch/alpha/kernel/err_common.c
248
printk("%s******* CONSOLE DATA LOG FOR CPU %d. *******\n"
arch/alpha/kernel/err_common.c
258
printk("%s*** %d total error(s) logged\n"
arch/alpha/kernel/err_common.c
289
printk("Attempted to re-register "
arch/alpha/kernel/err_common.c
310
printk("Attempted to re-register "
arch/alpha/kernel/err_common.c
40
printk("%s %08x: %016lx %s\n",
arch/alpha/kernel/err_common.c
50
printk("%s -- Frame Header --\n"
arch/alpha/kernel/err_common.c
72
printk("%s -- System Region --\n", err_print_prefix);
arch/alpha/kernel/err_common.c
77
printk("%s -- End of Frame --\n", err_print_prefix);
arch/alpha/kernel/err_common.c
97
printk("%s** Unexpected header CLASS %d TYPE %d, aborting\n",
arch/alpha/kernel/err_ev6.c
141
printk("%s Bcache tag parity error\n", err_print_prefix);
arch/alpha/kernel/err_ev6.c
146
printk("%s Dcache tag parity error\n", err_print_prefix);
arch/alpha/kernel/err_ev6.c
152
printk("%s Bcache single-bit error on a probe hit\n",
arch/alpha/kernel/err_ev6.c
158
printk("%s %s-STREAM %s-BIT ECC error from %s\n",
arch/alpha/kernel/err_ev6.c
162
printk("%s Address: 0x%016llx\n"
arch/alpha/kernel/err_ev6.c
170
printk("%s Block status: %s%s%s%s\n",
arch/alpha/kernel/err_ev6.c
209
printk("%s EXC_ADDR: 0x%016lx IER_CM: 0x%016lx"
arch/alpha/kernel/err_ev6.c
218
printk("%s UNKNOWN error, frame follows:\n",
arch/alpha/kernel/err_ev6.c
259
printk("%s*CPU %s Error (Vector 0x%x) reported on CPU %d:\n",
arch/alpha/kernel/err_ev6.c
37
printk("%s Icache parity error\n", err_print_prefix);
arch/alpha/kernel/err_ev6.c
68
printk("%s Dcache tag parity error on probe\n",
arch/alpha/kernel/err_ev6.c
71
printk("%s Dcache tag parity error - pipe 0\n",
arch/alpha/kernel/err_ev6.c
74
printk("%s Dcache tag parity error - pipe 1\n",
arch/alpha/kernel/err_ev6.c
77
printk("%s ECC error occurred on a store\n",
arch/alpha/kernel/err_ev6.c
80
printk("%s ECC error occurred on a %s load\n",
arch/alpha/kernel/err_ev6.c
84
printk("%s Dcache second error\n", err_print_prefix);
arch/alpha/kernel/err_ev7.c
133
printk("%s*CPU %s Error (Vector 0x%x) reported on CPU %d\n",
arch/alpha/kernel/err_ev7.c
240
printk("%s ** Unexpected header CLASS %d TYPE %d, aborting\n",
arch/alpha/kernel/err_ev7.c
250
printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n",
arch/alpha/kernel/err_ev7.c
255
printk("%s EXC_ADDR: %016llx\n"
arch/alpha/kernel/err_ev7.c
264
printk("%s ** PAL TYPE %d SUBPACKET\n",
arch/alpha/kernel/err_ev7.c
66
printk("%s**UNEXPECTED SUBPACKET CLASS %d "
arch/alpha/kernel/err_marvel.c
112
printk("%s Packet In Error: %s\n"
arch/alpha/kernel/err_marvel.c
1133
printk("%s*%s (Vector 0x%x) reported on CPU %d\n",
arch/alpha/kernel/err_marvel.c
1142
printk("%s*%s (Vector 0x%x) reported on CPU %d\n",
arch/alpha/kernel/err_marvel.c
132
printk("%s Correctable Error Symptoms:\n"
arch/alpha/kernel/err_marvel.c
186
printk("%s Uncorrectable Error Symptoms:\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
190
printk("%s Syndrome: 0x%llx\n",
arch/alpha/kernel/err_marvel.c
201
printk("%s Clock %s: %s\n",
arch/alpha/kernel/err_marvel.c
207
printk("%s REQ Credit Timeout or Overflow\n",
arch/alpha/kernel/err_marvel.c
210
printk("%s RIO Credit Timeout or Overflow\n",
arch/alpha/kernel/err_marvel.c
213
printk("%s WIO Credit Timeout or Overflow\n",
arch/alpha/kernel/err_marvel.c
216
printk("%s BLK Credit Timeout or Overflow\n",
arch/alpha/kernel/err_marvel.c
219
printk("%s NBK Credit Timeout or Overflow\n",
arch/alpha/kernel/err_marvel.c
223
printk("%s Read I/O Buffer Overflow\n",
arch/alpha/kernel/err_marvel.c
226
printk("%s Write I/O Buffer Overflow\n",
arch/alpha/kernel/err_marvel.c
229
printk("%s FWD Buffer Overflow\n",
arch/alpha/kernel/err_marvel.c
238
printk("%s Error Response sent to %s",
arch/alpha/kernel/err_marvel.c
242
printk("%s Lost Error sent somewhere else\n",
arch/alpha/kernel/err_marvel.c
250
printk("%s Error Reported by %s",
arch/alpha/kernel/err_marvel.c
271
printk("%s Starvation Int Trigger By: %s\n",
arch/alpha/kernel/err_marvel.c
316
printk("%s Up Hose Garbage Symptom:\n"
arch/alpha/kernel/err_marvel.c
325
printk("%s Packet Offset 0x%08llx\n",
arch/alpha/kernel/err_marvel.c
372
printk("%s %sSingle Bit Error(s) detected/corrected\n",
arch/alpha/kernel/err_marvel.c
383
printk("%s Halt Interrupt posted", err_print_prefix);
arch/alpha/kernel/err_marvel.c
385
printk("%s Hot Plug Event Interrupt posted",
arch/alpha/kernel/err_marvel.c
390
printk("%s Correctable Error Interrupt posted",
arch/alpha/kernel/err_marvel.c
393
printk("%s Starvation Interrupt posted", err_print_prefix);
arch/alpha/kernel/err_marvel.c
397
printk("%s Hard Error Interrupt posted", err_print_prefix);
arch/alpha/kernel/err_marvel.c
424
printk("%s Write byte into IO7 CSR\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
426
printk("%s PIO to non-existent CSR\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
428
printk("%s Bus Requester PID (Access Violation)\n",
arch/alpha/kernel/err_marvel.c
431
printk("%s Received NXM response from EV7\n",
arch/alpha/kernel/err_marvel.c
434
printk("%s Received ERROR RESPONSE\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
436
printk("%s Clock error on data flit\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
438
printk("%s Double Bit Error Data Error Detected\n",
arch/alpha/kernel/err_marvel.c
441
printk("%s Garbage Encoding Detected on the data\n",
arch/alpha/kernel/err_marvel.c
444
printk("%s Garbage Encoding sent up hose\n",
arch/alpha/kernel/err_marvel.c
449
printk("%s Orphan response (unexpected response)\n",
arch/alpha/kernel/err_marvel.c
452
printk("%s Down hose packet overflow\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
454
printk("%s Down hose credit overflow\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
456
printk("%s Unexpected or bad dealloc field\n",
arch/alpha/kernel/err_marvel.c
463
printk("%s BLACK HOLE: Timeout for all responses\n",
arch/alpha/kernel/err_marvel.c
466
printk("%s BLACK HOLE: Credit Timeout\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
468
printk("%s BLACK HOLE: Clock check on header\n",
arch/alpha/kernel/err_marvel.c
471
printk("%s BLACK HOLE: Uncorrectable Error on header\n",
arch/alpha/kernel/err_marvel.c
474
printk("%s BLACK HOLE: Garbage on header\n",
arch/alpha/kernel/err_marvel.c
477
printk("%s BLACK HOLE: Bad EV7 command\n",
arch/alpha/kernel/err_marvel.c
481
printk("%s Lost Error\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
483
printk("%s Failing Packet:\n"
arch/alpha/kernel/err_marvel.c
519
printk("%s TLB Error on index 0x%llx:\n"
arch/alpha/kernel/err_marvel.c
53
printk("%s**%s event (cabinet %d, drawer %d)\n",
arch/alpha/kernel/err_marvel.c
555
printk("%s Split Completion Error:\n"
arch/alpha/kernel/err_marvel.c
58
printk("%s Module Type: 0x%x - Unit ID 0x%x - "
arch/alpha/kernel/err_marvel.c
587
printk("%s Message: %s\n", err_print_prefix, message);
arch/alpha/kernel/err_marvel.c
624
printk("%s Transaction Summary:\n"
arch/alpha/kernel/err_marvel.c
697
printk("%s IO7 Master Retry Timeout expired\n",
arch/alpha/kernel/err_marvel.c
700
printk("%s Unexpected Split Completion\n",
arch/alpha/kernel/err_marvel.c
703
printk("%s IO7 Split Completion Timeout expired\n",
arch/alpha/kernel/err_marvel.c
706
printk("%s Hung bus during DMA transaction\n",
arch/alpha/kernel/err_marvel.c
709
printk("%s Master Abort\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
711
printk("%s IO7 Asserted Target Abort\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
713
printk("%s IO7 Received Target Abort\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
715
printk("%s Address or PCI-X Attribute Parity Error\n",
arch/alpha/kernel/err_marvel.c
718
printk("%s IO7 Asserted SERR\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
722
printk("%s IO7 Detected Data Parity Error\n",
arch/alpha/kernel/err_marvel.c
725
printk("%s Split Completion Response with "
arch/alpha/kernel/err_marvel.c
729
printk("%s PERR detected\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
731
printk("%s PERR while IO7 is master\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
733
printk("%s IO7 Received Split Completion Error message\n",
arch/alpha/kernel/err_marvel.c
752
printk("%s UPE Error:\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
755
printk("%s %s\n", err_print_prefix,
arch/alpha/kernel/err_marvel.c
770
printk("%s TLB ERROR\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
778
printk("%s AGP Request Queue Overflow\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
780
printk("%s AGP Sync Error\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
782
printk("%s Discarded split completion\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
784
printk("%s DMA Read Timeout\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
786
printk("%s CSR NXM READ\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
788
printk("%s CSR NXM WRITE\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
790
printk("%s SERR detected\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
792
printk("%s HUNG BUS detected\n", err_print_prefix);
arch/alpha/kernel/err_marvel.c
958
printk("%s*Error occurred on IO7 at PID %u\n",
arch/alpha/kernel/err_marvel.c
968
printk("%s PORT 7 ERROR:\n"
arch/alpha/kernel/err_marvel.c
992
printk("%s PID %u PORT %d POx_ERR_SUM: %016llx\n",
arch/alpha/kernel/err_marvel.c
997
printk("%s [ POx_FIRST_ERR: %016llx ]\n",
arch/alpha/kernel/err_titan.c
115
printk("%s PChip %d SERROR: %016llx\n",
arch/alpha/kernel/err_titan.c
118
printk("%s %sorrectable ECC Error:\n"
arch/alpha/kernel/err_titan.c
129
printk("%s Non Existent I/O Error\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
131
printk("%s Lost Uncorrectable ECC Error\n",
arch/alpha/kernel/err_titan.c
134
printk("%s Lost Correctable ECC Error\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
232
printk("%s PChip %d %cPERROR: %016llx\n",
arch/alpha/kernel/err_titan.c
236
printk("%s Invalid Peer-to-Peer Write\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
238
printk("%s Invalid Peer-to-Peer Read\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
240
printk("%s No DEVSEL as PCI Master [Master Abort]\n",
arch/alpha/kernel/err_titan.c
243
printk("%s Data Parity Error\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
245
printk("%s Target Abort\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
247
printk("%s Address Parity Error\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
249
printk("%s Scatter-Gather Error, Invalid PTE\n",
arch/alpha/kernel/err_titan.c
252
printk("%s Delayed-Completion Retry Timeout\n",
arch/alpha/kernel/err_titan.c
255
printk("%s PERR Asserted\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
257
printk("%s SERR Asserted\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
259
printk("%s Lost Error\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
260
printk("%s Command: 0x%x - %s\n"
arch/alpha/kernel/err_titan.c
266
printk("%s Dual Address Cycle\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
268
printk("%s Hit in Monster Window\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
325
printk("%s PChip %d AGPERROR: %016llx\n", err_print_prefix,
arch/alpha/kernel/err_titan.c
328
printk("%s No Window\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
330
printk("%s Peer-to-Peer set\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
332
printk("%s Invalid PTE\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
334
printk("%s Reserved Command\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
336
printk("%s HP Transaction Received while Queue Full\n",
arch/alpha/kernel/err_titan.c
339
printk("%s LP Transaction Received while Queue Full\n",
arch/alpha/kernel/err_titan.c
342
printk("%s Lost Error\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
343
printk("%s Command: 0x%x - %s, %d Quadwords%s\n"
arch/alpha/kernel/err_titan.c
349
printk("%s Dual Address Cycle\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
351
printk("%s Hit in Monster Window\n", err_print_prefix);
arch/alpha/kernel/err_titan.c
443
printk("%s"
arch/alpha/kernel/err_titan.c
538
printk("%s ** Unexpected header CLASS %d TYPE %d, aborting\n",
arch/alpha/kernel/err_titan.c
550
printk("%s ** Occurred on CPU %d:\n",
arch/alpha/kernel/err_titan.c
557
printk("%s ** REGATTA TYPE %d SUBPACKET\n",
arch/alpha/kernel/err_titan.c
604
printk("%s Summary Flags: %016llx\n"
arch/alpha/kernel/err_titan.c
66
printk("%s Non-existent memory access from: %s %d\n",
arch/alpha/kernel/err_titan.c
698
printk("%s** Unknown Error, frame follows\n",
arch/alpha/kernel/err_titan.c
739
printk("%s*System Event (Vector 0x%x) reported on CPU %d:\n",
arch/alpha/kernel/gct.c
21
printk(KERN_ERR "GCT Node MAGIC incorrect - GCT invalid\n");
arch/alpha/kernel/irq.c
116
printk(KERN_CRIT "device_interrupt: invalid interrupt %d\n",
arch/alpha/kernel/irq.c
39
printk(KERN_CRIT "Unexpected IRQ trap at vector %u\n", irq);
arch/alpha/kernel/irq_alpha.c
141
printk(KERN_CRIT "%s machine check %s\n", machine,
arch/alpha/kernel/irq_alpha.c
155
printk(KERN_CRIT "%s machine check: vector=0x%lx pc=0x%lx code=0x%x\n",
arch/alpha/kernel/irq_alpha.c
194
printk(KERN_CRIT "machine check type: %s%s\n",
arch/alpha/kernel/irq_alpha.c
205
printk(KERN_CRIT " +%8lx %016lx %016lx\n",
arch/alpha/kernel/irq_alpha.c
34
printk(KERN_CRIT "Performance counter interrupt!\n");
arch/alpha/kernel/irq_alpha.c
64
printk(KERN_CRIT "Interprocessor interrupt? "
arch/alpha/kernel/irq_alpha.c
87
printk(KERN_CRIT "Hardware intr %ld %lx? Huh?\n",
arch/alpha/kernel/irq_alpha.c
90
printk(KERN_CRIT "PC = %016lx PS=%04lx\n", regs->pc, regs->ps);
arch/alpha/kernel/module.c
15
#define DEBUGP printk
arch/alpha/kernel/module.c
254
printk(KERN_ERR "module %s: Unknown relocation: %lu\n",
arch/alpha/kernel/module.c
259
printk(KERN_ERR
arch/alpha/kernel/module.c
263
printk(KERN_ERR
arch/alpha/kernel/module.c
87
printk(KERN_ERR "module %s: no symbol table\n", me->name);
arch/alpha/kernel/module.c
91
printk(KERN_ERR "module %s: no got section\n", me->name);
arch/alpha/kernel/module.c
98
printk(KERN_ERR
arch/alpha/kernel/osf_sys.c
185
printk("%s: unimplemented OSF mmap flags %04lx\n",
arch/alpha/kernel/osf_sys.c
733
printk("sysinfo(%d)", command);
arch/alpha/kernel/osf_sys.c
81
printk("set_program_attributes(%lx %lx %lx %lx)\n",
arch/alpha/kernel/pc873xx.c
77
printk(KERN_INFO "PC873xx enabling EPP v1.9\n");
arch/alpha/kernel/pc873xx.c
86
printk(KERN_INFO "PC873xx enabling IDE interrupt\n");
arch/alpha/kernel/pci.c
220
printk(KERN_INFO "pci: enabling save/restore of SRM state\n");
arch/alpha/kernel/pci.c
226
printk(KERN_ERR "%s: kmalloc() failed!\n", __func__);
arch/alpha/kernel/pci.c
280
printk("PCI: Setting latency timer of device %s to 64\n",
arch/alpha/kernel/pci_iommu.c
27
# define DBGA(args...) printk(KERN_DEBUG args)
arch/alpha/kernel/pci_iommu.c
281
printk(KERN_WARNING "pci_map_single failed: "
arch/alpha/kernel/pci_iommu.c
32
# define DBGA2(args...) printk(KERN_DEBUG args)
arch/alpha/kernel/pci_iommu.c
375
printk(KERN_ERR "Bogus pci_unmap_single: dma_addr %llx "
arch/alpha/kernel/pci_iommu.c
418
printk(KERN_INFO "pci_alloc_consistent: "
arch/alpha/kernel/pci_iommu.c
682
printk(KERN_WARNING "pci_map_sg failed: no entries?\n");
arch/alpha/kernel/pci_iommu.c
690
printk(KERN_WARNING "pci_map_sg failed: "
arch/alpha/kernel/ptrace.c
248
printk("ptrace_cancel_bpt: bogus nsaved: %d!\n", nsaved);
arch/alpha/kernel/ptrace.c
37
#define DBG(fac,args) {if ((fac) & DEBUG) printk args;}
arch/alpha/kernel/rtc.c
41
printk("Ignoring invalid user specified epoch %lu\n", epoch);
arch/alpha/kernel/rtc.c
77
printk(KERN_INFO "Using epoch %d for rtc year %d\n", epoch, year);
arch/alpha/kernel/setup.c
1179
printk("%ldK Bcache detected; load hit latency %d "
arch/alpha/kernel/setup.c
280
printk("initrd moved to %p\n", start);
arch/alpha/kernel/setup.c
300
printk("memcluster %lu, usage %01lx, start %8lu, end %8lu\n",
arch/alpha/kernel/setup.c
339
printk("setup: forcing memory size to %ldK (from %ldK).\n",
arch/alpha/kernel/setup.c
353
printk("Initial ramdisk at: 0x%p (%lu bytes)\n",
arch/alpha/kernel/setup.c
358
printk("initrd extends beyond end of memory "
arch/alpha/kernel/setup.c
561
printk("Booting "
arch/alpha/kernel/setup.c
570
printk("Major Options: "
arch/alpha/kernel/setup.c
595
printk("Command line: %s\n", command_line);
arch/alpha/kernel/setup.c
648
printk("Max ASN from HWRPB is bad (0x%lx)\n", hwrpb->max_asn);
arch/alpha/kernel/signal.c
367
printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
arch/alpha/kernel/signal.c
421
printk("SIG deliver (%s:%d): sp=%p pc=%p ra=%p\n",
arch/alpha/kernel/smc37c669.c
17
# define DBG_DEVS(args) printk args
arch/alpha/kernel/smc37c669.c
1889
printk( " Serial 0: Enabled [ Port 0x%x, IRQ %d ]\n",
arch/alpha/kernel/smc37c669.c
1895
printk( " Serial 0: Disabled\n" );
arch/alpha/kernel/smc37c669.c
1899
printk( " Serial 1: Enabled [ Port 0x%x, IRQ %d ]\n",
arch/alpha/kernel/smc37c669.c
1905
printk( " Serial 1: Disabled\n" );
arch/alpha/kernel/smc37c669.c
1909
printk( " Parallel: Enabled [ Port 0x%x, IRQ %d/%d ]\n",
arch/alpha/kernel/smc37c669.c
1916
printk( " Parallel: Disabled\n" );
arch/alpha/kernel/smc37c669.c
1920
printk( " Floppy Ctrl: Enabled [ Port 0x%x, IRQ %d/%d ]\n",
arch/alpha/kernel/smc37c669.c
1927
printk( " Floppy Ctrl: Disabled\n" );
arch/alpha/kernel/smc37c669.c
1931
printk( " IDE 0: Enabled [ Port 0x%x, IRQ %d ]\n",
arch/alpha/kernel/smc37c669.c
1937
printk( " IDE 0: Disabled\n" );
arch/alpha/kernel/smc37c669.c
2441
printk("-- CR%02x : %02x\n", i, SMC37c669_read_config(i));
arch/alpha/kernel/smc37c669.c
2532
printk( "SMC37c669 Super I/O Controller found @ 0x%p\n",
arch/alpha/kernel/smc37c669.c
2538
printk( "No SMC37c669 Super I/O Controller found\n" );
arch/alpha/kernel/smc37c93x.c
20
# define DBG_DEVS(args) printk args
arch/alpha/kernel/smc37c93x.c
223
printk(currentControl & (1 << FDC)
arch/alpha/kernel/smc37c93x.c
225
printk(currentControl & (1 << IDE1)
arch/alpha/kernel/smc37c93x.c
227
printk(currentControl & (1 << IDE2)
arch/alpha/kernel/smc37c93x.c
229
printk(currentControl & (1 << PARP)
arch/alpha/kernel/smc37c93x.c
231
printk(currentControl & (1 << SER1)
arch/alpha/kernel/smc37c93x.c
233
printk(currentControl & (1 << SER2)
arch/alpha/kernel/smc37c93x.c
236
printk( "\n" );
arch/alpha/kernel/smc37c93x.c
267
printk("SMC FDC37C93X Ultra I/O Controller found @ 0x%lx\n",
arch/alpha/kernel/smp.c
110
printk("wait_boot_cpu_to_stop: FAILED on CPU %d, hanging now\n", cpuid);
arch/alpha/kernel/smp.c
124
printk("??, cpu 0x%x already present??\n", cpuid);
arch/alpha/kernel/smp.c
229
printk("Processor %x not ready\n", cpuid);
arch/alpha/kernel/smp.c
349
printk(KERN_ERR "SMP: Processor %d failed to start.\n", cpuid);
arch/alpha/kernel/smp.c
388
printk(KERN_ERR "SMP: Processor %d is stuck.\n", cpuid);
arch/alpha/kernel/smp.c
407
printk(KERN_WARNING "SMP: Booting off cpu %d instead of 0?\n",
arch/alpha/kernel/smp.c
440
printk(KERN_INFO "SMP: %d CPUs probed -- cpu_present_mask = %lx\n",
arch/alpha/kernel/smp.c
462
printk(KERN_INFO "SMP mode deactivated.\n");
arch/alpha/kernel/smp.c
466
printk(KERN_INFO "SMP starting up secondaries.\n");
arch/alpha/kernel/smp.c
489
printk(KERN_INFO "SMP: Total of %d processors activated "
arch/alpha/kernel/smp.c
49
#define DBGS(args) printk args
arch/alpha/kernel/smp.c
545
printk(KERN_CRIT "Unknown IPI on CPU %d: %lu\n",
arch/alpha/kernel/smp.c
565
printk(KERN_WARNING
arch/alpha/kernel/smp.c
579
printk(KERN_WARNING "smp_send_stop: Not on boot cpu.\n");
arch/alpha/kernel/srm_env.c
140
printk(KERN_INFO "%s: This Alpha system doesn't "
arch/alpha/kernel/srm_env.c
152
printk(KERN_ERR "Couldn't create base dir /proc/%s\n",
arch/alpha/kernel/srm_env.c
162
printk(KERN_ERR "Couldn't create dir /proc/%s/%s\n",
arch/alpha/kernel/srm_env.c
172
printk(KERN_ERR "Couldn't create dir /proc/%s/%s\n",
arch/alpha/kernel/srm_env.c
200
printk(KERN_INFO "%s: version %s loaded successfully\n", NAME,
arch/alpha/kernel/srm_env.c
214
printk(KERN_INFO "%s: unloaded successfully\n", NAME);
arch/alpha/kernel/sys_alcor.c
244
printk(KERN_INFO "%s: Detected AS500 or XLT motherboard.\n",
arch/alpha/kernel/sys_cabriolet.c
223
printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
arch/alpha/kernel/sys_cabriolet.c
225
printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
arch/alpha/kernel/sys_marvel.c
113
printk(KERN_ERR "%s: get_ctl failed for irq %x\n",
arch/alpha/kernel/sys_marvel.c
134
printk(KERN_ERR "%s: get_ctl failed for irq %x\n",
arch/alpha/kernel/sys_marvel.c
252
printk("Initializing interrupts for IO7 at PE %u - base %lx\n",
arch/alpha/kernel/sys_marvel.c
264
printk(" Interrupts reported to CPU at PE %u\n", boot_cpuid);
arch/alpha/kernel/sys_marvel.c
349
printk("PCI:%d:%d:%d (hose %d) is using MSI\n",
arch/alpha/kernel/sys_marvel.c
354
printk(" %d message(s) from 0x%04x\n",
arch/alpha/kernel/sys_marvel.c
357
printk(" reporting on %d IRQ(s) from %d (0x%x)\n",
arch/alpha/kernel/sys_marvel.c
369
printk(" forcing LSI interrupt on irq %d [0x%x]\n", irq, irq);
arch/alpha/kernel/sys_marvel.c
415
printk("Redirecting IO7 interrupts to local CPU at PE %u\n", cpuid);
arch/alpha/kernel/sys_marvel.c
80
printk(KERN_ERR
arch/alpha/kernel/sys_marvel.c
90
printk(KERN_ERR
arch/alpha/kernel/sys_nautilus.c
123
printk("PC %lx RA %lx\n", regs->pc, regs->r26);
arch/alpha/kernel/sys_nautilus.c
175
printk(KERN_CRIT "NAUTILUS Machine check 0x%lx "
arch/alpha/kernel/sys_nautilus.c
251
printk(KERN_ERR "Failed to request MEM on hose 0\n");
arch/alpha/kernel/sys_nautilus.c
253
printk(KERN_INFO "Irongate pci_mem %pR\n", &irongate_mem);
arch/alpha/kernel/sys_nautilus.c
260
printk(KERN_INFO "nautilus_init_pci: %ldk freed\n",
arch/alpha/kernel/sys_sable.c
229
printk("%s: mask 0x%lx bit 0x%lx irq 0x%x\n",
arch/alpha/kernel/sys_sable.c
245
printk("%s: mask 0x%lx bit 0x%lx irq 0x%x\n",
arch/alpha/kernel/sys_sable.c
282
printk("%s: vector 0x%lx bit 0x%x irq 0x%x\n",
arch/alpha/kernel/sys_sx164.c
147
printk("PCA56 MVI set enabled\n");
arch/alpha/kernel/sys_takara.c
232
printk(KERN_WARNING "takara_swizzle: can only "
arch/alpha/kernel/sys_takara.c
237
printk(KERN_WARNING "takara_swizzle: cannot handle "
arch/alpha/kernel/sys_takara.c
254
printk(KERN_ERR "Probing for PC873xx Super IO chip failed.\n");
arch/alpha/kernel/sys_takara.c
256
printk(KERN_INFO "Found %s Super IO chip at 0x%x\n",
arch/alpha/kernel/sys_titan.c
164
printk("titan_device_interrupt: NOT IMPLEMENTED YET!!\n");
arch/alpha/kernel/sys_titan.c
270
printk("titan_request_irq for IRQ %d returned %d; ignoring\n",
arch/alpha/kernel/sys_wildfire.c
48
printk(KERN_ERR "wildfire_update_irq_hw:"
arch/alpha/kernel/time.c
222
printk(KERN_INFO "Setting RTC_FREQ to %d Hz (%x)\n",
arch/alpha/kernel/time.c
230
printk("Turning on RTC interrupts.\n");
arch/alpha/kernel/time.c
427
printk("HWRPB cycle frequency bogus. "
arch/alpha/kernel/time.c
433
printk("HWRPB cycle frequency bogus, "
arch/alpha/kernel/traps.c
102
printk("%s[<%lx>] %pSR\n", loglvl, tmp, (void *)tmp);
arch/alpha/kernel/traps.c
104
printk("%s ...", loglvl);
arch/alpha/kernel/traps.c
108
printk("%s\n", loglvl);
arch/alpha/kernel/traps.c
132
printk("%s ", loglvl);
arch/alpha/kernel/traps.c
148
printk("CPU %d ", hard_smp_processor_id());
arch/alpha/kernel/traps.c
150
printk("%s(%d): %s %ld\n", current->comm, task_pid_nr(current), str, err);
arch/alpha/kernel/traps.c
157
printk("die_if_kernel recursion detected.\n");
arch/alpha/kernel/traps.c
222
printk("Kernel bug at %s:%d\n",
arch/alpha/kernel/traps.c
36
printk("pc = [<%016lx>] ra = [<%016lx>] ps = %04lx %s\n",
arch/alpha/kernel/traps.c
38
printk("pc is at %pSR\n", (void *)regs->pc);
arch/alpha/kernel/traps.c
39
printk("ra is at %pSR\n", (void *)regs->r26);
arch/alpha/kernel/traps.c
40
printk("v0 = %016lx t0 = %016lx t1 = %016lx\n",
arch/alpha/kernel/traps.c
42
printk("t2 = %016lx t3 = %016lx t4 = %016lx\n",
arch/alpha/kernel/traps.c
44
printk("t5 = %016lx t6 = %016lx t7 = %016lx\n",
arch/alpha/kernel/traps.c
48
printk("s0 = %016lx s1 = %016lx s2 = %016lx\n",
arch/alpha/kernel/traps.c
50
printk("s3 = %016lx s4 = %016lx s5 = %016lx\n",
arch/alpha/kernel/traps.c
518
printk("Bad unaligned kernel access at %016lx: %p %lx %lu\n",
arch/alpha/kernel/traps.c
52
printk("s6 = %016lx\n", r9_15[15]);
arch/alpha/kernel/traps.c
529
printk("Forwarding unaligned exception at %lx (%lx)\n",
arch/alpha/kernel/traps.c
541
printk("%s(%d): unhandled unaligned exception\n",
arch/alpha/kernel/traps.c
544
printk("pc = [<%016lx>] ra = [<%016lx>] ps = %04lx\n",
arch/alpha/kernel/traps.c
546
printk("r0 = %016lx r1 = %016lx r2 = %016lx\n",
arch/alpha/kernel/traps.c
548
printk("r3 = %016lx r4 = %016lx r5 = %016lx\n",
arch/alpha/kernel/traps.c
55
printk("a0 = %016lx a1 = %016lx a2 = %016lx\n",
arch/alpha/kernel/traps.c
550
printk("r6 = %016lx r7 = %016lx r8 = %016lx\n",
arch/alpha/kernel/traps.c
552
printk("r9 = %016lx r10= %016lx r11= %016lx\n",
arch/alpha/kernel/traps.c
554
printk("r12= %016lx r13= %016lx r14= %016lx\n",
arch/alpha/kernel/traps.c
556
printk("r15= %016lx\n", una_reg(15));
arch/alpha/kernel/traps.c
557
printk("r16= %016lx r17= %016lx r18= %016lx\n",
arch/alpha/kernel/traps.c
559
printk("r19= %016lx r20= %016lx r21= %016lx\n",
arch/alpha/kernel/traps.c
561
printk("r22= %016lx r23= %016lx r24= %016lx\n",
arch/alpha/kernel/traps.c
563
printk("r25= %016lx r27= %016lx r28= %016lx\n",
arch/alpha/kernel/traps.c
565
printk("gp = %016lx sp = %p\n", regs->gp, regs+1);
arch/alpha/kernel/traps.c
57
printk("a3 = %016lx a4 = %016lx a5 = %016lx\n",
arch/alpha/kernel/traps.c
571
printk("die_if_kernel recursion detected.\n");
arch/alpha/kernel/traps.c
59
printk("t8 = %016lx t9 = %016lx t10= %016lx\n",
arch/alpha/kernel/traps.c
61
printk("t11= %016lx pv = %016lx at = %016lx\n",
arch/alpha/kernel/traps.c
63
printk("gp = %016lx sp = %p\n", regs->gp, regs+1);
arch/alpha/kernel/traps.c
677
printk("%s(%d): unaligned trap at %016lx: %p %lx %ld\n",
arch/alpha/kernel/traps.c
81
printk("Code:");
arch/alpha/kernel/traps.c
86
printk("%c%08x%c", i ? ' ' : '<', insn, i ? ' ' : '>');
arch/alpha/kernel/traps.c
88
printk("\n");
arch/alpha/kernel/traps.c
95
printk("%sTrace:\n", loglvl);
arch/alpha/lib/stacktrace.c
55
printk("Prologue [<%p>], Frame %p:\n", pro_pc, sp);
arch/alpha/lib/stacktrace.c
62
printk("\t\t%s / 0x%016lx\n", reg_name[reg], value);
arch/alpha/lib/stacktrace.c
97
printk("\tstack trace:\n");
arch/alpha/math-emu/math.c
331
printk(KERN_ERR "alpha_fp_emul: Invalid FP insn %#x at %#lx\n",
arch/alpha/mm/fault.c
202
printk(KERN_ALERT "Unable to handle kernel paging request at "
arch/arc/kernel/stacktrace.c
144
printk("unwinder looping too long, aborting !\n");
arch/arc/kernel/stacktrace.c
177
printk("%s %pS\n", loglvl, (void *)address);
arch/arc/kernel/stacktrace.c
237
printk("%s\nStack Trace:\n", loglvl);
arch/arm/common/locomo.c
435
printk(KERN_INFO "LoCoMo Chip: %lu%lu\n", (r >> 8), (r & 0xff));
arch/arm/common/locomo.c
706
printk(KERN_WARNING "locomo: m62332_senddata Error 1\n");
arch/arm/common/locomo.c
734
printk(KERN_WARNING "locomo: m62332_senddata Error 2\n");
arch/arm/common/locomo.c
759
printk(KERN_WARNING "locomo: m62332_senddata Error 3\n");
arch/arm/common/sa1111.c
839
printk(KERN_DEBUG "SA1111 not detected: ID = %08lx\n", id);
arch/arm/common/scoop.c
204
printk("Sharp Scoop Device found at 0x%08x -> 0x%8p\n",(unsigned int)mem->start, devptr->base);
arch/arm/kernel/atags_compat.c
101
printk(KERN_DEBUG "Converting old-style param struct to taglist\n");
arch/arm/kernel/bios32.c
372
printk("PCI: %s swizzling pin %d => pin %d slot %d\n",
arch/arm/kernel/bios32.c
390
printk("PCI: %s mapping slot %d pin %d => irq %d\n",
arch/arm/kernel/bios32.c
52
printk("(%s: %04X) ", pci_name(dev), status);
arch/arm/kernel/machine_kexec.c
83
printk(KERN_DEBUG "CPU %u will stop doing anything useful since another CPU has crashed\n",
arch/arm/kernel/process.c
136
printk("PC is at %pS\n", (void *)instruction_pointer(regs));
arch/arm/kernel/process.c
137
printk("LR is at %pS\n", (void *)regs->ARM_lr);
arch/arm/kernel/process.c
138
printk("pc : [<%08lx>] lr : [<%08lx>] psr: %08lx\n",
arch/arm/kernel/process.c
140
printk("sp : %08lx ip : %08lx fp : %08lx\n",
arch/arm/kernel/process.c
142
printk("r10: %08lx r9 : %08lx r8 : %08lx\n",
arch/arm/kernel/process.c
145
printk("r7 : %08lx r6 : %08lx r5 : %08lx r4 : %08lx\n",
arch/arm/kernel/process.c
148
printk("r3 : %08lx r2 : %08lx r1 : %08lx r0 : %08lx\n",
arch/arm/kernel/process.c
169
printk("Flags: %s IRQs o%s FIQs o%s Mode %s ISA %s Segment %s\n",
arch/arm/kernel/process.c
176
printk("xPSR: %08lx\n", regs->ARM_cpsr);
arch/arm/kernel/process.c
195
printk("Control: %08x%s\n", ctrl, buf);
arch/arm/kernel/reboot.c
145
printk("Reboot failed -- System halted\n");
arch/arm/kernel/setup.c
371
printk("%s", buf);
arch/arm/kernel/smp.c
489
printk(KERN_INFO "SMP: Total of %d processors activated "
arch/arm/kernel/traps.c
110
printk("%s%s\n", loglvl, str);
arch/arm/kernel/traps.c
115
printk("%s%s\n", loglvl, str);
arch/arm/kernel/traps.c
144
printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
arch/arm/kernel/traps.c
162
printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
arch/arm/kernel/traps.c
208
printk("%sCode: %s\n", lvl, str);
arch/arm/kernel/traps.c
224
printk("%sCall trace: ", loglvl);
arch/arm/kernel/traps.c
85
printk("%sFunction entered at [<%08lx>] from [<%08lx>]\n",
arch/arm/kernel/traps.c
88
printk("%s[<%08lx>] (%ps) from [<%08lx>] (%pS)\n",
arch/arm/kernel/traps.c
91
printk("%s %ps from %pS\n", loglvl, (void *)where, (void *)from);
arch/arm/kernel/unwind.c
527
printk("%sCall trace: ", loglvl);
arch/arm/lib/uaccess_with_memcpy.c
256
printk("copy_to_user: %d %llu %llu\n", size, t1 - t0, t2 - t1);
arch/arm/lib/uaccess_with_memcpy.c
265
printk("clear_user: %d %llu %llu\n", size, t1 - t0, t2 - t1);
arch/arm/mach-dove/pcie.c
194
printk(KERN_INFO "Dove PCIe port %d: ", index);
arch/arm/mach-dove/pcie.c
203
printk(KERN_INFO "link up\n");
arch/arm/mach-dove/pcie.c
211
printk(KERN_INFO "link down, ignoring\n");
arch/arm/mach-exynos/platsmp.c
354
printk(KERN_ERR "cpu1 power enable failed");
arch/arm/mach-footbridge/dc21285.c
159
printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n",
arch/arm/mach-footbridge/dc21285.c
165
printk(KERN_DEBUG "PCI: target abort: ");
arch/arm/mach-footbridge/dc21285.c
169
printk("\n");
arch/arm/mach-footbridge/dc21285.c
184
printk(KERN_DEBUG "PCI: system error received: ");
arch/arm/mach-footbridge/dc21285.c
186
printk("\n");
arch/arm/mach-footbridge/dc21285.c
203
printk(KERN_DEBUG "PCI: discard timer expired\n");
arch/arm/mach-footbridge/dc21285.c
213
printk(KERN_DEBUG "PCI: data parity error detected: ");
arch/arm/mach-footbridge/dc21285.c
215
printk("\n");
arch/arm/mach-footbridge/dc21285.c
228
printk(KERN_DEBUG "PCI: parity error detected: ");
arch/arm/mach-footbridge/dc21285.c
230
printk("\n");
arch/arm/mach-footbridge/dc21285.c
267
printk("out of memory for root bus resources");
arch/arm/mach-footbridge/dc21285.c
316
printk(KERN_INFO "PCI: DC21285 footbridge, revision %02lX, in "
arch/arm/mach-footbridge/isa-irq.c
139
printk(KERN_INFO "IRQ: ISA PIC not found\n");
arch/arm/mach-footbridge/isa-rtc.c
55
printk(KERN_WARNING "RTC: *** warning: CMOS battery bad\n");
arch/arm/mach-footbridge/isa.c
86
printk(KERN_ERR "Unable to register RTC device: %d\n", err);
arch/arm/mach-footbridge/isa.c
90
printk(KERN_ERR "Unable to register serial device: %d\n", err);
arch/arm/mach-footbridge/netwinder-hw.c
402
#define dprintk(x...) printk(x)
arch/arm/mach-footbridge/netwinder-hw.c
552
printk("SoundBlaster: DSP reset failed\n");
arch/arm/mach-footbridge/netwinder-hw.c
563
printk("SoundBlaster: DSP not ready\n");
arch/arm/mach-footbridge/netwinder-hw.c
580
printk("SoundBlaster: could not turn speaker off\n");
arch/arm/mach-footbridge/netwinder-pci.c
40
printk(KERN_ERR "PCI: unknown device in slot %s\n",
arch/arm/mach-imx/avic.c
222
printk(KERN_INFO "MXC IRQ initialized\n");
arch/arm/mach-imx/pm-imx5.c
190
printk(KERN_WARNING "UNKNOWN cpu power mode: %d\n", mode);
arch/arm/mach-lpc32xx/common.c
115
printk(KERN_INFO "LPC32XX unique ID: %08x%08x%08x%08x\n",
arch/arm/mach-mv78xx0/common.c
416
printk(KERN_INFO "%s ", mv78xx0_id());
arch/arm/mach-mv78xx0/common.c
417
printk("core #%d, ", core_index);
arch/arm/mach-mv78xx0/common.c
418
printk("PCLK = %dMHz, ", (pclk + 499999) / 1000000);
arch/arm/mach-mv78xx0/common.c
419
printk("L2 = %dMHz, ", (l2clk + 499999) / 1000000);
arch/arm/mach-mv78xx0/common.c
420
printk("HCLK = %dMHz, ", (hclk + 499999) / 1000000);
arch/arm/mach-mv78xx0/common.c
421
printk("TCLK = %dMHz\n", (get_tclk() + 499999) / 1000000);
arch/arm/mach-mv78xx0/mpp.c
25
printk(KERN_ERR "MPP setup: unknown mv78x00 variant "
arch/arm/mach-mv78xx0/pcie.c
239
printk(KERN_INFO "MV78xx0 PCIe port %d.%d: ", maj, min);
arch/arm/mach-mv78xx0/pcie.c
244
printk("link up\n");
arch/arm/mach-mv78xx0/pcie.c
253
printk("link down, ignoring\n");
arch/arm/mach-omap1/clock.c
535
printk(KERN_ERR "clock.c: Enable for %s without enable code\n",
arch/arm/mach-omap1/clock.c
765
printk(" done\n");
arch/arm/mach-omap1/dma.c
225
printk(KERN_INFO "DMA support for OMAP15xx initialized\n");
arch/arm/mach-omap1/dma.c
228
printk(KERN_INFO "OMAP DMA hardware version %d\n",
arch/arm/mach-omap1/dma.c
230
printk(KERN_INFO "DMA capabilities: %08x:%08x:%04x:%04x:%04x\n",
arch/arm/mach-omap1/id.c
136
printk(KERN_DEBUG "OMAP_DIE_ID_0: 0x%08x\n", omap_readl(OMAP_DIE_ID_0));
arch/arm/mach-omap1/id.c
137
printk(KERN_DEBUG "OMAP_DIE_ID_1: 0x%08x DIE_REV: %i\n",
arch/arm/mach-omap1/id.c
140
printk(KERN_DEBUG "OMAP_PRODUCTION_ID_0: 0x%08x\n",
arch/arm/mach-omap1/id.c
142
printk(KERN_DEBUG "OMAP_PRODUCTION_ID_1: 0x%08x JTAG_ID: 0x%04x\n",
arch/arm/mach-omap1/id.c
145
printk(KERN_DEBUG "OMAP32_ID_0: 0x%08x\n", omap_readl(OMAP32_ID_0));
arch/arm/mach-omap1/id.c
146
printk(KERN_DEBUG "OMAP32_ID_1: 0x%08x\n", omap_readl(OMAP32_ID_1));
arch/arm/mach-omap1/id.c
147
printk(KERN_DEBUG "JTAG_ID: 0x%04x DIE_REV: %i\n", jtag_id, die_rev);
arch/arm/mach-omap1/id.c
196
printk(KERN_INFO "Unknown OMAP cpu type: 0x%02x\n", cpu_type);
arch/arm/mach-omap1/mcbsp.c
299
printk(KERN_ERR "Could not register McBSP devices\n");
arch/arm/mach-omap1/mux.c
363
printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
arch/arm/mach-omap1/mux.c
369
printk("MUX: Setting register %s\n", cfg->name);
arch/arm/mach-omap1/mux.c
370
printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
arch/arm/mach-omap1/mux.c
375
printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
arch/arm/mach-omap1/mux.c
382
printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
arch/arm/mach-omap1/mux.c
400
printk(KERN_ERR "Invalid pin table\n");
arch/arm/mach-omap1/mux.c
417
printk(KERN_ERR "mux: Broken omap_cfg_reg(%lu) entry\n",
arch/arm/mach-omap1/mux.c
424
printk(KERN_ERR "Pin mux table not initialized\n");
arch/arm/mach-omap1/mux.c
429
printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
arch/arm/mach-omap1/omap-dma.c
300
printk(KERN_ERR "Invalid DMA burst mode\n");
arch/arm/mach-omap1/pm.c
204
printk(KERN_INFO "PM: OMAP%x is trying to enter deep sleep...\n",
arch/arm/mach-omap1/pm.c
383
printk(KERN_INFO "PM: OMAP%x is re-starting from deep sleep...\n",
arch/arm/mach-omap1/pm.c
599
printk(KERN_ERR "PM not initialized: Missing SRAM support\n");
arch/arm/mach-omap1/serial.c
122
printk(KERN_ERR "Could not ioremap uart%i\n", i);
arch/arm/mach-omap1/serial.c
129
printk("Could not get uart1_ck\n");
arch/arm/mach-omap1/serial.c
139
printk("Could not get uart2_ck\n");
arch/arm/mach-omap1/serial.c
151
printk("Could not get uart3_ck\n");
arch/arm/mach-omap1/time.c
195
printk(err, "mpu_timer2");
arch/arm/mach-omap1/usb.c
321
printk(KERN_ERR "no usb0 alt pin config on 15xx\n");
arch/arm/mach-omap1/usb.c
364
printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
arch/arm/mach-omap1/usb.c
430
printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
arch/arm/mach-omap1/usb.c
503
printk(KERN_ERR "illegal usb%d %d-wire transceiver\n",
arch/arm/mach-omap1/usb.c
606
printk("USB: hmc %d", config->hmc_mode);
arch/arm/mach-omap1/usb.c
686
printk(KERN_ERR "USB: No init for your chip yet\n");
arch/arm/mach-omap1/usb.c
85
printk("USB: hmc %d", config->hmc_mode);
arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
121
printk(KERN_INFO "Could not set MPU rate to %luMHz\n",
arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
252
printk(KERN_ERR "Failed to register clock\n");
arch/arm/mach-omap2/id.c
180
printk(KERN_ERR "Unknown OMAP CPU id\n");
arch/arm/mach-omap2/pm-debug.c
93
printk(KERN_ERR "pwrdm state mismatch(%s) %d != %d\n",
arch/arm/mach-omap2/usb-tusb6010.c
115
printk(error, "async", status);
arch/arm/mach-omap2/usb-tusb6010.c
120
printk(error, "sync", status);
arch/arm/mach-omap2/usb-tusb6010.c
165
printk(error, 1, status);
arch/arm/mach-omap2/usb-tusb6010.c
180
printk(error, 2, status);
arch/arm/mach-omap2/usb-tusb6010.c
193
printk(error, 4, status);
arch/arm/mach-omap2/usb-tusb6010.c
199
printk(error, 5, status);
arch/arm/mach-omap2/usb-tusb6010.c
205
printk(error, 6, status);
arch/arm/mach-omap2/usb-tusb6010.c
213
printk(error, 7, status);
arch/arm/mach-orion5x/board-dt.c
42
printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk);
arch/arm/mach-orion5x/board-dt.c
56
printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
arch/arm/mach-orion5x/board-rd88f5182.c
50
printk(KERN_ERR "rd88f5182_pci_preinit failed to "
arch/arm/mach-orion5x/board-rd88f5182.c
55
printk(KERN_ERR "rd88f5182_pci_preinit failed to request gpio %d\n", pin);
arch/arm/mach-orion5x/board-rd88f5182.c
63
printk(KERN_ERR "rd88f5182_pci_preinit failed to "
arch/arm/mach-orion5x/board-rd88f5182.c
68
printk(KERN_ERR "rd88f5182_pci_preinit failed to gpio_request %d\n", pin);
arch/arm/mach-orion5x/common.c
319
printk(KERN_INFO "Orion ID: %s. TCLK=%d.\n", dev_name, orion5x_tclk);
arch/arm/mach-orion5x/common.c
334
printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n");
arch/arm/mach-orion5x/common.c
373
printk(KERN_WARNING
arch/arm/mach-orion5x/dns323-setup.c
240
printk("DNS-323: Found ethernet MAC address: %pM\n", addr);
arch/arm/mach-orion5x/dns323-setup.c
690
printk("DNS-323: Failed to read MAC address\n");
arch/arm/mach-orion5x/kurobox_pro-setup.c
240
printk(KERN_ERR ">%s: receive failed.\n", __func__);
arch/arm/mach-orion5x/kurobox_pro-setup.c
258
printk(KERN_ERR ">%s: Checksum Error : "
arch/arm/mach-orion5x/kurobox_pro-setup.c
275
printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
arch/arm/mach-orion5x/mpp.c
32
printk(KERN_ERR "MPP setup: unknown orion5x variant "
arch/arm/mach-orion5x/pci.c
156
printk(KERN_NOTICE "Applying Orion-1/Orion-NAS PCIe config "
arch/arm/mach-orion5x/terastation_pro2-setup.c
218
printk(KERN_ERR ">%s: receive failed.\n", __func__);
arch/arm/mach-orion5x/terastation_pro2-setup.c
236
printk(KERN_ERR ">%s: Checksum Error : "
arch/arm/mach-orion5x/terastation_pro2-setup.c
253
printk(KERN_ERR ">%s: Error : NAK or Illegal Data "
arch/arm/mach-orion5x/terastation_pro2-setup.c
88
printk(KERN_ERR "tsp2_pci_preinit failed "
arch/arm/mach-orion5x/terastation_pro2-setup.c
93
printk(KERN_ERR "tsp2_pci_preinit failed to "
arch/arm/mach-orion5x/ts209-setup.c
117
printk(KERN_ERR "qnap_ts209_pci_preinit failed to "
arch/arm/mach-orion5x/ts209-setup.c
122
printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
arch/arm/mach-orion5x/ts209-setup.c
131
printk(KERN_ERR "qnap_ts209_pci_preinit failed "
arch/arm/mach-orion5x/ts209-setup.c
136
printk(KERN_ERR "qnap_ts209_pci_preinit failed to gpio_request "
arch/arm/mach-orion5x/tsx09-common.c
100
printk(KERN_INFO "tsx09: found ethernet mac address %pM\n", addr);
arch/arm/mach-pxa/pm.c
101
printk(KERN_ERR "no valid pxa_cpu_pm_fns defined\n");
arch/arm/mach-pxa/pxa3xx.c
159
printk(KERN_ERR "Not suspending: no wakeup sources\n");
arch/arm/mach-pxa/pxa3xx.c
188
printk(KERN_ERR "Unable to map ISRAM: disabling standby/suspend\n");
arch/arm/mach-pxa/reset.c
25
printk(KERN_ERR "Can't request reset_gpio\n");
arch/arm/mach-pxa/reset.c
34
printk(KERN_ERR "Can't configure reset_gpio\n");
arch/arm/mach-pxa/sharpsl_pm.c
506
printk(KERN_WARNING "Not charging: temperature out of limits.\n");
arch/arm/mach-rpc/dma.c
290
printk("floppydma: couldn't claim FIQ.\n");
arch/arm/mach-rpc/dma.c
382
printk("IOMDDMA%u: unable to register: %d\n", i, ret);
arch/arm/mach-rpc/dma.c
387
printk("IOMDFLOPPY: unable to register: %d\n", ret);
arch/arm/mach-rpc/dma.c
390
printk("IOMDSOUND: unable to register: %d\n", ret);
arch/arm/mach-rpc/ecard.c
1005
printk("Probing expansion cards\n");
arch/arm/mach-rpc/ecard.c
439
printk(KERN_ERR "ecard: rejecting request to "
arch/arm/mach-rpc/ecard.c
475
printk(KERN_ERR "ecard: rejecting request to "
arch/arm/mach-rpc/ecard.c
497
printk("Expansion card IRQ state:\n");
arch/arm/mach-rpc/ecard.c
509
printk(" %d: %sclaimed irq %spending\n",
arch/arm/mach-rpc/ecard.c
513
printk(" %d: %sclaimed irqaddr %p, mask = %02X, status = %02X\n",
arch/arm/mach-rpc/ecard.c
536
printk(KERN_ERR "\nInterrupt lockup detected - "
arch/arm/mach-rpc/ecard.c
551
printk(KERN_WARNING "Unrecognised interrupt from backplane\n");
arch/arm/mach-rpc/ecard.c
999
printk(KERN_ERR "Ecard: unable to create kernel thread: %ld\n",
arch/arm/mach-s3c/dev-audio-s3c64xx.c
39
printk(KERN_DEBUG "Invalid I2S Controller number: %d\n",
arch/arm/mach-s3c/init.c
119
printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n");
arch/arm/mach-s3c/init.c
49
printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode);
arch/arm/mach-s3c/init.c
53
printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode);
arch/arm/mach-s3c/init.c
56
printk(KERN_ERR "CPU %s support not enabled\n", cpu->name);
arch/arm/mach-s3c/platformdata.c
22
printk(KERN_ERR "%s: no platform data supplied\n", pdev->name);
arch/arm/mach-s3c/pm.c
192
printk("S3C Power Management, Copyright 2004 Simtec Electronics\n");
arch/arm/mach-s3c/pm.c
49
printk(KERN_INFO "wake %s for irq %d\n",
arch/arm/mach-s3c/pm.c
79
printk(KERN_ERR "%s: error: no cpu sleep function\n", __func__);
arch/arm/mach-s3c/pm.c
91
printk(KERN_ERR "%s: No wake-up sources!\n", __func__);
arch/arm/mach-s3c/pm.c
92
printk(KERN_ERR "%s: Aborting sleep\n", __func__);
arch/arm/mach-s3c/s3c6410.c
82
printk("S3C6410: Initialising architecture\n");
arch/arm/mach-s3c/s3c64xx.c
229
printk(KERN_DEBUG "%s: initialising interrupts\n", __func__);
arch/arm/mach-s3c/s3c64xx.c
288
printk(KERN_WARNING "No edge setting!\n");
arch/arm/mach-s3c/s3c64xx.c
312
printk(KERN_ERR "No such irq type %d", type);
arch/arm/mach-s3c/wakeup-mask.c
40
printk(KERN_INFO "wakemask %08x => %08x\n", __raw_readl(reg), val);
arch/arm/mach-sa1100/assabet.c
160
printk(KERN_WARNING "No ACK from ADV7171\n");
arch/arm/mach-sa1100/assabet.c
180
printk(KERN_WARNING "Something dragging SDA down?\n");
arch/arm/mach-sa1100/assabet.c
556
printk( "Warning: Neponset detected but full support "
arch/arm/mach-sa1100/assabet.c
648
printk("Neponset expansion board detected\n");
arch/arm/mach-sa1100/collie.c
384
printk(KERN_WARNING "collie: Unable to register LoCoMo device\n");
arch/arm/mach-sa1100/generic.c
113
printk(KERN_ERR "Unable to register device %s: %d\n",
arch/arm/mach-sa1100/jornada720_ssp.c
143
printk(KERN_INFO "SSP: device initialized with irq\n");
arch/arm/mach-sa1100/jornada720_ssp.c
147
printk(KERN_WARNING "SSP: initialization failed, trying non-irq solution \n");
arch/arm/mach-sa1100/jornada720_ssp.c
171
printk(KERN_WARNING "SSP: attempts failed, bailing\n");
arch/arm/mach-sa1100/jornada720_ssp.c
177
printk(KERN_INFO "SSP: device initialized\n");
arch/arm/mach-sa1100/jornada720_ssp.c
65
printk(KERN_WARNING "SSP: timeout while waiting for transmit\n");
arch/arm/mach-sa1100/ssp.c
30
printk(KERN_WARNING "SSP: receiver overrun\n");
arch/arm/mm/alignment.c
974
printk("Alignment trap: %s (%d) PC=0x%08lx Instr=0x%0*x "
arch/arm/mm/fault.c
49
printk("%s[%08lx] *pgd=%08llx", lvl, addr, (long long)pgd_val(*pgd));
arch/arm/nwfpe/fpa11.c
77
printk("NWFPE: setting up state.\n");
arch/arm/nwfpe/fpa11.c
90
printk("NWFPE: emulating opcode %08x\n", opcode);
arch/arm/nwfpe/fpmodule.c
137
printk(KERN_DEBUG
arch/arm/plat-orion/mpp.c
34
printk(KERN_DEBUG "initial MPP regs:");
arch/arm/plat-orion/mpp.c
36
printk(KERN_ERR "orion_mpp_conf: invalid mpp_max\n");
arch/arm/plat-orion/mpp.c
42
printk(" %08x", mpp_ctrl[i]);
arch/arm/plat-orion/mpp.c
44
printk("\n");
arch/arm/plat-orion/mpp.c
52
printk(KERN_ERR "orion_mpp_conf: invalid MPP "
arch/arm/plat-orion/mpp.c
57
printk(KERN_WARNING
arch/arm/plat-orion/mpp.c
76
printk(KERN_DEBUG " final MPP regs:");
arch/arm/plat-orion/mpp.c
79
printk(" %08x", mpp_ctrl[i]);
arch/arm/plat-orion/mpp.c
81
printk("\n");
arch/arm64/kernel/process.c
149
printk("Reboot failed -- System halted\n");
arch/arm64/kernel/process.c
167
printk("pstate: %08llx (%c%c%c%c %c %s %s %c%c%c %cDIT %cSSBS)\n",
arch/arm64/kernel/process.c
185
printk("pstate: %08llx (%c%c%c%c %c%c%c%c %cPAN %cUAO %cTCO %cDIT %cSSBS BTYPE=%s)\n",
arch/arm64/kernel/process.c
223
printk("pc : %pS\n", (void *)regs->pc);
arch/arm64/kernel/process.c
224
printk("lr : %pS\n", (void *)ptrauth_strip_kernel_insn_pac(lr));
arch/arm64/kernel/process.c
226
printk("pc : %016llx\n", regs->pc);
arch/arm64/kernel/process.c
227
printk("lr : %016llx\n", lr);
arch/arm64/kernel/process.c
230
printk("sp : %016llx\n", sp);
arch/arm64/kernel/process.c
233
printk("pmr: %08x\n", regs->pmr);
arch/arm64/kernel/process.c
238
printk("x%-2d: %016llx", i, regs->regs[i]);
arch/arm64/kernel/stacktrace.c
466
printk("%s %pSb%s%s%s%s%s\n", loglvl,
arch/arm64/kernel/stacktrace.c
491
printk("%sCall trace:\n", loglvl);
arch/arm64/kernel/traps.c
171
printk(KERN_EMERG "Code: %s\n", str);
arch/csky/kernel/ptrace.c
375
printk("\n\n\n");
arch/csky/kernel/ptrace.c
377
printk("iutlb[%d]: entryhi - 0x%lx; entrylo0 - 0x%lx;"
arch/csky/kernel/ptrace.c
380
printk("\n\n\n");
arch/csky/kernel/ptrace.c
410
printk("\n\n\n");
arch/csky/kernel/ptrace.c
412
printk("dutlb[%d]: entryhi - 0x%lx; entrylo0 - 0x%lx;"
arch/csky/kernel/ptrace.c
415
printk("\n\n\n");
arch/csky/kernel/ptrace.c
443
printk("\n\n\n");
arch/csky/kernel/ptrace.c
446
printk("jtlb[%x]: entryhi - 0x%lx; entrylo0 - 0x%lx;"
arch/csky/kernel/ptrace.c
449
printk("\n\n\n");
arch/hexagon/include/asm/pgtable.h
98
printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__,\
arch/hexagon/kernel/module.c
105
printk(KERN_ERR
arch/hexagon/kernel/module.c
138
printk(KERN_ERR "%s: GOT/PLT relocations unsupported\n",
arch/hexagon/kernel/module.c
142
printk(KERN_ERR "%s: unknown relocation: %u\n",
arch/hexagon/kernel/module.c
15
#define DEBUGP printk
arch/hexagon/kernel/module.c
48
printk(KERN_WARNING
arch/hexagon/kernel/setup.c
56
printk(KERN_INFO "PHYS_OFFSET=0x%08lx\n", PHYS_OFFSET);
arch/hexagon/kernel/smp.c
109
printk(KERN_ERR "interrupt %ld not configured?\n",
arch/hexagon/kernel/smp.c
156
printk(KERN_INFO "%s cpu %d\n", __func__, current_thread_info()->cpu);
arch/hexagon/kernel/traps.c
106
printk("%s-- Corrupt frame pointer %p\n", loglvl, fp);
arch/hexagon/kernel/traps.c
123
printk("%s[%p] 0x%lx: %s + 0x%lx", loglvl, fp, ip, name, offset);
arch/hexagon/kernel/traps.c
125
printk(KERN_CONT " (FP out of bounds!)");
arch/hexagon/kernel/traps.c
127
printk(KERN_CONT " [%s] ", modname);
arch/hexagon/kernel/traps.c
128
printk(KERN_CONT "\n");
arch/hexagon/kernel/traps.c
133
printk("%s-- Corrupt frame pointer %p\n", loglvl, newfp);
arch/hexagon/kernel/traps.c
143
printk("%s-- trap0 -- syscall_nr: %ld", loglvl,
arch/hexagon/kernel/traps.c
145
printk(KERN_CONT " psp: %lx elr: %lx\n",
arch/hexagon/kernel/traps.c
151
printk("%s-- %s (0x%lx) badva: %lx\n", loglvl,
arch/hexagon/kernel/traps.c
195
printk(KERN_EMERG "Oops: %s[#%d]:\n", str, ++die.counter);
arch/hexagon/kernel/traps.c
92
printk("%sCPU#%d, %s/%d, Call Trace:\n", loglvl, raw_smp_processor_id(),
arch/hexagon/kernel/vm_events.c
26
printk(KERN_EMERG "restart_r0: \t0x%08lx syscall_nr: %ld\n",
arch/hexagon/kernel/vm_events.c
28
printk(KERN_EMERG "preds: \t\t0x%08lx\n", regs->preds);
arch/hexagon/kernel/vm_events.c
29
printk(KERN_EMERG "lc0: \t0x%08lx sa0: 0x%08lx m0: 0x%08lx\n",
arch/hexagon/kernel/vm_events.c
31
printk(KERN_EMERG "lc1: \t0x%08lx sa1: 0x%08lx m1: 0x%08lx\n",
arch/hexagon/kernel/vm_events.c
33
printk(KERN_EMERG "gp: \t0x%08lx ugp: 0x%08lx usr: 0x%08lx\n",
arch/hexagon/kernel/vm_events.c
35
printk(KERN_EMERG "cs0: \t0x%08lx cs1: 0x%08lx\n",
arch/hexagon/kernel/vm_events.c
37
printk(KERN_EMERG "r0: \t0x%08lx %08lx %08lx %08lx\n", regs->r00,
arch/hexagon/kernel/vm_events.c
41
printk(KERN_EMERG "r4: \t0x%08lx %08lx %08lx %08lx\n", regs->r04,
arch/hexagon/kernel/vm_events.c
45
printk(KERN_EMERG "r8: \t0x%08lx %08lx %08lx %08lx\n", regs->r08,
arch/hexagon/kernel/vm_events.c
49
printk(KERN_EMERG "r12: \t0x%08lx %08lx %08lx %08lx\n", regs->r12,
arch/hexagon/kernel/vm_events.c
53
printk(KERN_EMERG "r16: \t0x%08lx %08lx %08lx %08lx\n", regs->r16,
arch/hexagon/kernel/vm_events.c
57
printk(KERN_EMERG "r20: \t0x%08lx %08lx %08lx %08lx\n", regs->r20,
arch/hexagon/kernel/vm_events.c
61
printk(KERN_EMERG "r24: \t0x%08lx %08lx %08lx %08lx\n", regs->r24,
arch/hexagon/kernel/vm_events.c
65
printk(KERN_EMERG "r28: \t0x%08lx %08lx %08lx %08lx\n", regs->r28,
arch/hexagon/kernel/vm_events.c
70
printk(KERN_EMERG "elr: \t0x%08lx cause: 0x%08lx user_mode: %d\n",
arch/hexagon/kernel/vm_events.c
72
printk(KERN_EMERG "psp: \t0x%08lx badva: 0x%08lx int_enabled: %d\n",
arch/hexagon/mm/init.c
138
printk(KERN_INFO "bootmem_startpg: 0x%08lx\n", bootmem_startpg);
arch/hexagon/mm/init.c
139
printk(KERN_INFO "bootmem_lastpg: 0x%08lx\n", bootmem_lastpg);
arch/hexagon/mm/init.c
140
printk(KERN_INFO "min_low_pfn: 0x%08lx\n", min_low_pfn);
arch/hexagon/mm/init.c
141
printk(KERN_INFO "max_low_pfn: 0x%08lx\n", max_low_pfn);
arch/hexagon/mm/init.c
171
printk(KERN_INFO "clearing segtable from %p to %p\n", segtable,
arch/hexagon/mm/init.c
177
printk(KERN_INFO "segtable = %p (should be equal to _K_io_map)\n",
arch/hexagon/mm/init.c
182
printk(KERN_INFO "&_K_init_devicetable = 0x%08x\n",
arch/hexagon/mm/init.c
186
printk(KERN_INFO "*segtable = 0x%08x\n", *segtable);
arch/hexagon/mm/init.c
193
printk(KERN_INFO "PAGE_SIZE=%lu\n", PAGE_SIZE);
arch/hexagon/mm/vm_fault.c
152
printk(KERN_EMERG "Unable to handle kernel paging request at "
arch/loongarch/kernel/alternative.c
28
printk(KERN_DEBUG "%s: " fmt "\n", __func__, ##args); \
arch/loongarch/kernel/alternative.c
40
printk(KERN_DEBUG fmt, ##args); \
arch/loongarch/kernel/alternative.c
42
printk(KERN_CONT "<%08x> ", _buf[_j].word); \
arch/loongarch/kernel/alternative.c
43
printk(KERN_CONT "<%08x>\n", _buf[_j].word); \
arch/loongarch/kernel/relocate.c
335
printk(level);
arch/loongarch/kernel/signal.c
43
# define DEBUGP(fmt, args...) printk("%s: " fmt, __func__, ##args)
arch/loongarch/kernel/traps.c
116
printk("%sStack :", loglvl);
arch/loongarch/kernel/traps.c
121
printk("%s ", loglvl);
arch/loongarch/kernel/traps.c
170
printk("Code:");
arch/loongarch/kernel/traps.c
225
printk(" CRMD: %08lx (", x);
arch/loongarch/kernel/traps.c
238
printk(" PRMD: %08lx (", x);
arch/loongarch/kernel/traps.c
247
printk(" EUEN: %08lx (", x);
arch/loongarch/kernel/traps.c
257
printk(" ECFG: %08lx (", x);
arch/loongarch/kernel/traps.c
330
printk("ESTAT: %08lx [%s] (", x, humanize_exc_name(ecode, esubcode));
arch/loongarch/kernel/traps.c
344
printk("pc %0*lx ra %0*lx tp %0*lx sp %0*lx\n",
arch/loongarch/kernel/traps.c
346
printk("a0 %0*lx a1 %0*lx a2 %0*lx a3 %0*lx\n",
arch/loongarch/kernel/traps.c
348
printk("a4 %0*lx a5 %0*lx a6 %0*lx a7 %0*lx\n",
arch/loongarch/kernel/traps.c
350
printk("t0 %0*lx t1 %0*lx t2 %0*lx t3 %0*lx\n",
arch/loongarch/kernel/traps.c
352
printk("t4 %0*lx t5 %0*lx t6 %0*lx t7 %0*lx\n",
arch/loongarch/kernel/traps.c
354
printk("t8 %0*lx u0 %0*lx s9 %0*lx s0 %0*lx\n",
arch/loongarch/kernel/traps.c
356
printk("s1 %0*lx s2 %0*lx s3 %0*lx s4 %0*lx\n",
arch/loongarch/kernel/traps.c
358
printk("s5 %0*lx s6 %0*lx s7 %0*lx s8 %0*lx\n",
arch/loongarch/kernel/traps.c
363
printk("syscall restart flag: %0*lx\n", GPR_FIELD(0));
arch/loongarch/kernel/traps.c
366
printk(" ra: %0*lx\n", GPR_FIELD(1));
arch/loongarch/kernel/traps.c
367
printk(" ERA: %0*lx\n", field, regs->csr_era);
arch/loongarch/kernel/traps.c
369
printk(" ra: %0*lx %pS\n", GPR_FIELD(1), (void *) regs->regs[1]);
arch/loongarch/kernel/traps.c
370
printk(" ERA: %0*lx %pS\n", field, regs->csr_era, (void *) regs->csr_era);
arch/loongarch/kernel/traps.c
382
printk(" BADV: %0*lx\n", field, regs->csr_badvaddr);
arch/loongarch/kernel/traps.c
384
printk(" PRID: %08x (%s, %s)\n", read_cpucfg(LOONGARCH_CPUCFG0),
arch/loongarch/kernel/traps.c
398
printk("Process %s (pid: %d, threadinfo=%p, task=%p)\n",
arch/loongarch/kernel/traps.c
403
printk("\n");
arch/loongarch/kernel/traps.c
422
printk("%s[#%d]:\n", str, ++die_counter);
arch/loongarch/kernel/traps.c
93
printk("%sCall Trace:", loglvl);
arch/loongarch/kernel/traps.c
99
printk("%s\n", loglvl);
arch/m68k/coldfire/m528x.c
110
printk(KERN_INFO "WildFireMod hibernating...\n");
arch/m68k/coldfire/m528x.c
122
printk(KERN_EMERG "Failed to hibernate. Halting!\n");
arch/m68k/coldfire/sltimers.c
57
printk(KERN_INFO "PROFILE: lodging TIMER 1 @ %dHz as profile timer\n",
arch/m68k/coldfire/timers.c
173
printk(KERN_INFO "PROFILE: lodging TIMER2 @ %dHz as profile timer\n",
arch/m68k/coldfire/vectors.c
29
printk(KERN_DEBUG "%s(%d): BUS ERROR TRAP\n", __FILE__, __LINE__);
arch/m68k/include/asm/math-emu.h
273
jsr printk
arch/m68k/include/asm/mcf_pgtable.h
141
printk(KERN_ERR "%s:%d: bad pte %08lx.\n", \
arch/m68k/include/asm/mcf_pgtable.h
144
printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
arch/m68k/include/asm/motorola_pgtable.h
135
printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
arch/m68k/include/asm/motorola_pgtable.h
137
printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
arch/m68k/include/asm/motorola_pgtable.h
139
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
arch/m68k/kernel/module.c
15
#define DEBUGP(fmt, ...) printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
arch/m68k/kernel/traps.c
816
printk("%sCall Trace:", loglvl);
arch/m68k/kernel/traps.c
946
printk("%sStack from %08lx:", loglvl, (unsigned long)stack);
arch/m68k/mac/config.c
835
printk(KERN_DEBUG " Penguin bootinfo data:\n");
arch/m68k/mac/config.c
836
printk(KERN_DEBUG " Video: addr 0x%lx row 0x%lx depth %lx dimensions %ld x %ld\n",
arch/m68k/mac/config.c
840
printk(KERN_DEBUG " Videological 0x%lx phys. 0x%lx, SCC at 0x%lx\n",
arch/m68k/mac/config.c
843
printk(KERN_DEBUG " Boottime: 0x%lx GMTBias: 0x%lx\n",
arch/m68k/mac/config.c
845
printk(KERN_DEBUG " Machine ID: %ld CPUid: 0x%lx memory size: 0x%lx\n",
arch/m68k/mac/iop.c
126
printk(KERN_DEBUG "%s: " fmt, __func__, ##__VA_ARGS__)
arch/m68k/mac/iop.c
128
printk(KERN_CONT fmt, ##__VA_ARGS__)
arch/m68k/mac/psc.c
48
printk(KERN_DEBUG "PSC #%d: IFR = 0x%02X IER = 0x%02X\n",
arch/m68k/mac/via.c
269
printk(KERN_DEBUG "VIA1: DDRA = 0x%02X DDRB = 0x%02X ACR = 0x%02X\n",
arch/m68k/mac/via.c
271
printk(KERN_DEBUG " PCR = 0x%02X IFR = 0x%02X IER = 0x%02X\n",
arch/m68k/mac/via.c
276
printk(KERN_DEBUG "VIA2: IFR = 0x%02X IER = 0x%02X\n",
arch/m68k/mac/via.c
278
printk(KERN_DEBUG " SIFR = 0x%02X SIER = 0x%02X\n",
arch/m68k/mac/via.c
281
printk(KERN_DEBUG "VIA2: DDRA = 0x%02X DDRB = 0x%02X ACR = 0x%02X\n",
arch/m68k/mac/via.c
284
printk(KERN_DEBUG " PCR = 0x%02X IFR = 0x%02X IER = 0x%02X\n",
arch/m68k/mm/kmap.c
194
printk("ioremap: 0x%lx,0x%lx(%d) - ", physaddr, size, cacheflag);
arch/m68k/mm/kmap.c
213
printk("0x%lx,0x%lx,0x%lx", physaddr, virtaddr, retaddr);
arch/m68k/mm/kmap.c
255
printk ("\npa=%#lx va=%#lx ", physaddr, virtaddr);
arch/m68k/mm/kmap.c
262
printk("ioremap: no mem for pmd_dir\n");
arch/m68k/mm/kmap.c
277
printk("ioremap: no mem for pte_dir\n");
arch/m68k/mm/kmap.c
288
printk("\n");
arch/m68k/mm/kmap.c
367
printk("iocachemode: bad pud(%08lx)\n", pud_val(*pud_dir));
arch/m68k/mm/kmap.c
387
printk("iocachemode: bad pmd (%08lx)\n", pmd_val(*pmd_dir));
arch/m68k/mm/kmap.c
73
printk("iounmap: bad pud(%08lx)\n", pud_val(*pud_dir));
arch/m68k/mm/kmap.c
94
printk("iounmap: bad pmd (%08lx)\n", pmd_val(*pmd_dir));
arch/m68k/mm/motorola.c
283
printk("kernel_ptr_init: %p\n", last_pmd_table);
arch/m68k/mm/motorola.c
321
printk ("\npa=%#lx va=%#lx ", physaddr & PAGE_MASK,
arch/m68k/mm/motorola.c
329
printk ("[very early term]");
arch/m68k/mm/motorola.c
343
printk ("[new pointer %p]", pmd_dir);
arch/m68k/mm/motorola.c
352
printk ("[early term]");
arch/m68k/mm/motorola.c
359
printk ("[zero map]");
arch/m68k/mm/motorola.c
374
printk ("[new table]");
arch/m68k/mm/motorola.c
393
printk("\n");
arch/m68k/mm/motorola.c
437
printk ("start of paging_init (%p, %lx)\n", kernel_pg_dir, availmem);
arch/m68k/mm/motorola.c
456
printk("Ignoring memory chunk at 0x%lx:0x%lx before the first chunk\n",
arch/m68k/mm/motorola.c
458
printk("Fix your bootloader or use a memfile to make use of this area!\n");
arch/m68k/mm/motorola.c
507
printk ("before node_set_state\n");
arch/microblaze/include/asm/pgtable.h
107
printk(KERN_ERR "%s:%d: bad pte "PTE_FMT".\n", \
arch/microblaze/include/asm/pgtable.h
110
printk(KERN_ERR "%s:%d: bad pgd %08lx.\n", \
arch/microblaze/kernel/traps.c
54
printk("%sKernel Stack:\n", loglvl);
arch/microblaze/kernel/traps.c
71
printk("%s\n\nCall Trace:\n", loglvl);
arch/microblaze/kernel/traps.c
73
printk("%s\n", loglvl);
arch/microblaze/kernel/unwind.c
208
printk("%sHW EXCEPTION\n", loglvl);
arch/microblaze/kernel/unwind.c
217
printk("%s%s\n", loglvl, handler->trap_name);
arch/microblaze/kernel/unwind.c
237
printk("%s[<%p>] PID %lu [%s]\n",
arch/mips/alchemy/board-gpr.c
46
printk(KERN_EMERG "Triggering watchdog soft reset...\n");
arch/mips/alchemy/board-gpr.c
63
printk(KERN_INFO "Trapeze ITS GPR board\n");
arch/mips/alchemy/board-mtx1.c
77
printk(KERN_INFO "4G Systems MTX-1 Board\n");
arch/mips/alchemy/common/dbdma.c
1075
printk(KERN_ERR "Cannot grab DBDMA interrupt!\n");
arch/mips/alchemy/common/dbdma.c
232
printk(KERN_DEBUG "add_device: id:%x flags:%x padd:%x\n",
arch/mips/alchemy/common/dbdma.c
559
printk(KERN_DEBUG "did:%x sid:%x cmd0:%x cmd1:%x source0:%x "
arch/mips/alchemy/common/dbdma.c
685
printk(KERN_DEBUG "cmd0:%x cmd1:%x source0:%x source1:%x dest0:%x dest1:%x\n",
arch/mips/alchemy/common/dbdma.c
771
printk(KERN_WARNING "warning: DMA channel won't halt\n");
arch/mips/alchemy/common/dbdma.c
905
printk(KERN_DEBUG "Chan %x, stp %x (dev %d) dtp %x (dev %d)\n",
arch/mips/alchemy/common/dbdma.c
908
printk(KERN_DEBUG "desc base %x, get %x, put %x, cur %x\n",
arch/mips/alchemy/common/dbdma.c
912
printk(KERN_DEBUG "dbdma chan %x\n", (u32)cp);
arch/mips/alchemy/common/dbdma.c
913
printk(KERN_DEBUG "cfg %08x, desptr %08x, statptr %08x\n",
arch/mips/alchemy/common/dbdma.c
915
printk(KERN_DEBUG "dbell %08x, irq %08x, stat %08x, bytecnt %08x\n",
arch/mips/alchemy/common/dbdma.c
923
printk(KERN_DEBUG "Dp[%d]= %08x, cmd0 %08x, cmd1 %08x\n",
arch/mips/alchemy/common/dbdma.c
925
printk(KERN_DEBUG "src0 %08x, src1 %08x, dest0 %08x, dest1 %08x\n",
arch/mips/alchemy/common/dbdma.c
928
printk(KERN_DEBUG "stat %08x, nxtptr %08x\n",
arch/mips/alchemy/common/dma.c
203
printk(KERN_ERR "Error trying to free DMA%d\n", dmanr);
arch/mips/alchemy/common/dma.c
237
printk(KERN_INFO "Alchemy DMA initialized\n");
arch/mips/alchemy/common/platform.c
120
printk(KERN_INFO "Alchemy: no memory for UART data\n");
arch/mips/alchemy/common/platform.c
131
printk(KERN_INFO "Alchemy: missing support for UARTs\n");
arch/mips/alchemy/common/platform.c
136
printk(KERN_INFO "Alchemy: failed to register UARTs\n");
arch/mips/alchemy/common/platform.c
242
printk(KERN_INFO "Alchemy USB: cannot add OHCI0\n");
arch/mips/alchemy/common/platform.c
262
printk(KERN_INFO "Alchemy USB: cannot add EHCI0\n");
arch/mips/alchemy/common/platform.c
282
printk(KERN_INFO "Alchemy USB: cannot add OHCI1\n");
arch/mips/alchemy/common/platform.c
415
printk(KERN_INFO "Alchemy: no memory for MAC0 resources\n");
arch/mips/alchemy/common/platform.c
426
printk(KERN_INFO "Alchemy: failed to register MAC0\n");
arch/mips/alchemy/common/platform.c
436
printk(KERN_INFO "Alchemy: no memory for MAC1 resources\n");
arch/mips/alchemy/common/platform.c
449
printk(KERN_INFO "Alchemy: failed to register MAC1\n");
arch/mips/alchemy/common/time.c
130
printk(KERN_INFO "Alchemy clocksource installed\n");
arch/mips/alchemy/devboards/db1200.c
134
printk(KERN_INFO "Alchemy/AMD/RMI %s Board, CPLD Rev %d"
arch/mips/alchemy/devboards/db1200.c
780
printk(KERN_ERR "WARNING!!!\n");
arch/mips/alchemy/devboards/db1200.c
781
printk(KERN_ERR "WARNING!!!\n");
arch/mips/alchemy/devboards/db1200.c
782
printk(KERN_ERR "PB1200 must be at CPLD rev 4. Please have\n");
arch/mips/alchemy/devboards/db1200.c
783
printk(KERN_ERR "the board updated to latest revisions.\n");
arch/mips/alchemy/devboards/db1200.c
784
printk(KERN_ERR "This software will not work reliably\n");
arch/mips/alchemy/devboards/db1200.c
785
printk(KERN_ERR "on anything older than CPLD rev 4.!\n");
arch/mips/alchemy/devboards/db1200.c
786
printk(KERN_ERR "WARNING!!!\n");
arch/mips/alchemy/devboards/db1200.c
787
printk(KERN_ERR "WARNING!!!\n");
arch/mips/alchemy/devboards/db1200.c
870
printk(KERN_INFO "%s device configuration:\n", get_system_type());
arch/mips/alchemy/devboards/db1200.c
879
printk(KERN_INFO " S6.8 OFF: PSC0 mode I2C\n");
arch/mips/alchemy/devboards/db1200.c
880
printk(KERN_INFO " OTG port VBUS supply available!\n");
arch/mips/alchemy/devboards/db1200.c
887
printk(KERN_INFO " S6.8 ON : PSC0 mode SPI\n");
arch/mips/alchemy/devboards/db1200.c
888
printk(KERN_INFO " OTG port VBUS supply disabled\n");
arch/mips/alchemy/devboards/db1200.c
900
printk(KERN_INFO " S6.7 ON : PSC1 mode I2S\n");
arch/mips/alchemy/devboards/db1200.c
905
printk(KERN_INFO " S6.7 OFF: PSC1 mode AC97\n");
arch/mips/alchemy/devboards/db1300.c
945
printk(KERN_INFO "NetLogic DBAu1300 Development Platform.\n\t"
arch/mips/alchemy/devboards/pm.c
91
printk(KERN_ERR "db1x: no wakeup source activated!\n");
arch/mips/cobalt/time.c
40
printk(KERN_INFO "MIPS counter frequency %dHz\n", mips_hpt_frequency);
arch/mips/dec/ecc-berr.c
189
printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
arch/mips/dec/ecc-berr.c
193
printk(fmt, " ECC syndrome ", syn, status, xbit, i);
arch/mips/dec/ecc-berr.c
220
printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n",
arch/mips/dec/kn01-berr.c
169
printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n",
arch/mips/dec/kn02xa-berr.c
124
printk(KERN_ALERT "Fatal bus interrupt, epc == %08lx, ra == %08lx\n",
arch/mips/dec/kn02xa-berr.c
88
printk(KERN_ALERT "Bus error %s: %s %s %s at %#010lx\n",
arch/mips/dec/kn02xa-berr.c
92
printk(KERN_ALERT " Byte lane status %#3x -- "
arch/mips/dec/prom/cmdline.c
38
printk("arcs_cmdline: %s\n", &(arcs_cmdline[0]));
arch/mips/dec/prom/identify.c
126
printk("Zero sysid returned from PROM! "
arch/mips/dec/prom/identify.c
183
printk("This is an %s, id is %x\n",
arch/mips/dec/prom/identify.c
186
printk("This is a %s\n", dec_system_strings[mips_machtype]);
arch/mips/dec/prom/init.c
121
printk(cpu_msg);
arch/mips/dec/prom/init.c
122
printk(r4k_msg);
arch/mips/dec/prom/init.c
132
printk(cpu_msg);
arch/mips/dec/prom/init.c
133
printk(r3k_msg);
arch/mips/dec/time.c
153
printk(KERN_INFO "MIPS counter frequency %dHz\n",
arch/mips/fw/arc/identify.c
106
printk("ARCH: %s\n", iname);
arch/mips/fw/arc/init.c
34
printk(KERN_CRIT "Aieee, bad prom vector magic %08lx\n",
arch/mips/fw/arc/init.c
42
printk(KERN_INFO "PROMLIB: ARC firmware Version %d Revision %d\n",
arch/mips/fw/arc/memory.c
130
printk("ARCS MEMORY DESCRIPTOR dump:\n");
arch/mips/fw/arc/memory.c
133
printk("[%d,%p]: base<%08lx> pages<%08lx> type<%s>\n",
arch/mips/include/asm/mach-au1x00/au1000_dma.h
204
printk(KERN_INFO "halt_dma: HALT poll expired!\n");
arch/mips/include/asm/octeon/cvmx.h
81
#define cvmx_dprintf printk
arch/mips/include/asm/pgtable-32.h
109
printk("%s:%d: bad pte %016Lx.\n", __FILE__, __LINE__, pte_val(e))
arch/mips/include/asm/pgtable-32.h
112
printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
arch/mips/include/asm/pgtable-32.h
115
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
arch/mips/include/asm/pgtable-64.h
155
printk("%s:%d: bad pte %016lx.\n", __FILE__, __LINE__, pte_val(e))
arch/mips/include/asm/pgtable-64.h
158
printk("%s:%d: bad pmd %016lx.\n", __FILE__, __LINE__, pmd_val(e))
arch/mips/include/asm/pgtable-64.h
162
printk("%s:%d: bad pud %016lx.\n", __FILE__, __LINE__, pud_val(e))
arch/mips/include/asm/pgtable-64.h
165
printk("%s:%d: bad pgd %016lx.\n", __FILE__, __LINE__, pgd_val(e))
arch/mips/jazz/jazzdma.c
104
printk("vdma_alloc: Invalid physical address: %08lx\n",
arch/mips/jazz/jazzdma.c
110
printk("vdma_alloc: Invalid size: %08lx\n", size);
arch/mips/jazz/jazzdma.c
156
printk("vdma_alloc: Allocated %d pages starting from %08lx\n",
arch/mips/jazz/jazzdma.c
160
printk("LADDR: ");
arch/mips/jazz/jazzdma.c
162
printk("%08x ", i << 12);
arch/mips/jazz/jazzdma.c
163
printk("\nPADDR: ");
arch/mips/jazz/jazzdma.c
165
printk("%08x ", pgtbl[i].frame);
arch/mips/jazz/jazzdma.c
166
printk("\nOWNER: ");
arch/mips/jazz/jazzdma.c
168
printk("%08x ", pgtbl[i].owner);
arch/mips/jazz/jazzdma.c
169
printk("\n");
arch/mips/jazz/jazzdma.c
191
printk
arch/mips/jazz/jazzdma.c
203
printk("vdma_free: freed %ld pages starting from %08lx\n",
arch/mips/jazz/jazzdma.c
253
printk("vdma_stats: CONFIG: %08x\n",
arch/mips/jazz/jazzdma.c
255
printk("R4030 translation table base: %08x\n",
arch/mips/jazz/jazzdma.c
257
printk("R4030 translation table limit: %08x\n",
arch/mips/jazz/jazzdma.c
259
printk("vdma_stats: INV_ADDR: %08x\n",
arch/mips/jazz/jazzdma.c
261
printk("vdma_stats: R_FAIL_ADDR: %08x\n",
arch/mips/jazz/jazzdma.c
263
printk("vdma_stats: M_FAIL_ADDR: %08x\n",
arch/mips/jazz/jazzdma.c
265
printk("vdma_stats: IRQ_SOURCE: %08x\n",
arch/mips/jazz/jazzdma.c
267
printk("vdma_stats: I386_ERROR: %08x\n",
arch/mips/jazz/jazzdma.c
269
printk("vdma_chnl_modes: ");
arch/mips/jazz/jazzdma.c
271
printk("%04x ",
arch/mips/jazz/jazzdma.c
274
printk("\n");
arch/mips/jazz/jazzdma.c
275
printk("vdma_chnl_enables: ");
arch/mips/jazz/jazzdma.c
277
printk("%04x ",
arch/mips/jazz/jazzdma.c
280
printk("\n");
arch/mips/jazz/jazzdma.c
295
printk("vdma_enable: channel %d\n", channel);
arch/mips/jazz/jazzdma.c
302
printk("VDMA: Channel %d: Address error!\n", channel);
arch/mips/jazz/jazzdma.c
304
printk("VDMA: Channel %d: Memory error!\n", channel);
arch/mips/jazz/jazzdma.c
335
printk("vdma_disable: channel %d\n", channel);
arch/mips/jazz/jazzdma.c
336
printk("VDMA: channel %d status: %04x (%s) mode: "
arch/mips/jazz/jazzdma.c
374
printk("vdma_set_mode: channel %d, mode 0x%x\n", channel,
arch/mips/jazz/jazzdma.c
398
printk("VDMA: Audio DMA not supported yet.\n");
arch/mips/jazz/jazzdma.c
402
printk
arch/mips/jazz/jazzdma.c
423
printk
arch/mips/jazz/jazzdma.c
437
printk("vdma_set_addr: channel %d, addr %lx\n", channel,
arch/mips/jazz/jazzdma.c
451
printk("vdma_set_count: channel %d, count %08x\n", channel,
arch/mips/jazz/jazzdma.c
469
printk("vdma_get_residual: channel %d: residual=%d\n",
arch/mips/jazz/jazzdma.c
485
printk("vdma_get_enable: channel %d: enable=%d\n", channel,
arch/mips/jazz/jazzdma.c
87
printk(KERN_INFO "VDMA: R4030 DMA pagetables initialized.\n");
arch/mips/kernel/branch.c
871
printk("%s: unaligned epc - sending SIGBUS.\n", current->comm);
arch/mips/kernel/cevt-txx9.c
201
printk(KERN_INFO "TXx9: clockevent device at 0x%lx, irq %d\n",
arch/mips/kernel/cpu-probe.c
1649
printk(KERN_INFO "Unknown Octeon chip!\n");
arch/mips/kernel/cpu-probe.c
2018
printk(KERN_INFO "FPU revision is: %08x\n", c->fpu_id);
arch/mips/kernel/csrc-ioasic.c
57
printk(KERN_INFO "I/O ASIC clock frequency %dHz\n", freq);
arch/mips/kernel/idle.c
117
printk("Wait instruction disabled.\n");
arch/mips/kernel/irq.c
37
printk("unexpected IRQ # %d\n", irq);
arch/mips/kernel/irq.c
88
printk("do_IRQ: stack overflow: %ld\n",
arch/mips/kernel/machine_kexec.c
253
printk("Will call new kernel at %08lx\n", image->start);
arch/mips/kernel/machine_kexec.c
254
printk("Bye ...\n");
arch/mips/kernel/mips-mt-fpaff.c
217
printk(KERN_DEBUG "FPU Affinity set after %ld emulations\n",
arch/mips/kernel/mips-mt.c
104
printk("CP0.Config7 forced to 0x%08x.\n", mt_opt_config7);
arch/mips/kernel/mips-mt.c
111
printk("Config7: 0x%08x\n", read_c0_config7());
arch/mips/kernel/mips-mt.c
149
printk("Mapped %ld ITC cells starting at 0x%08x\n",
arch/mips/kernel/mips-mt.c
89
printk("34K return prediction stack override set to %d.\n",
arch/mips/kernel/mips-mt.c
97
printk("34K ALU/LSU sync override set to %d.\n", mt_opt_nblsu);
arch/mips/kernel/process.c
519
printk("Can't analyze schedule() prologue at %p\n", schedule);
arch/mips/kernel/r4k-bugs64.c
124
printk("Checking for the multiply/shift bug... ");
arch/mips/kernel/r4k-bugs64.c
190
printk("Checking for the daddi bug... ");
arch/mips/kernel/r4k-bugs64.c
254
printk("Checking for the daddiu bug... ");
arch/mips/kernel/relocate.c
454
printk(level);
arch/mips/kernel/setup.c
220
printk(KERN_INFO "Initrd not found or empty");
arch/mips/kernel/setup.c
224
printk(KERN_ERR "Initrd extends beyond end of memory");
arch/mips/kernel/setup.c
237
printk(KERN_CONT " - disabling initrd\n");
arch/mips/kernel/signal-common.h
17
# define DEBUGP(fmt, args...) printk("%s: " fmt, __func__, ##args)
arch/mips/kernel/smp-mt.c
224
printk(KERN_INFO "Detected %i available secondary CPU(s)\n", ncpu);
arch/mips/kernel/smp.c
167
printk(KERN_WARNING "Overriding previously set SMP ops\n");
arch/mips/kernel/spram.c
178
printk(KERN_ERR "vp=%p wrote=%08x got=%08x\n",
arch/mips/kernel/spram.c
182
printk(KERN_ERR "vp=%p wrote=%08x got=%08x\n",
arch/mips/kernel/topology.c
21
printk(KERN_WARNING "topology_init: register_cpu %d "
arch/mips/kernel/traps.c
127
printk("%sCall Trace:", loglvl);
arch/mips/kernel/traps.c
129
printk("%s\n", loglvl);
arch/mips/kernel/traps.c
133
printk("%s (Bad stack address)", loglvl);
arch/mips/kernel/traps.c
139
printk("%s\n", loglvl);
arch/mips/kernel/traps.c
1622
printk(KERN_DEBUG "Thread Underflow\n");
arch/mips/kernel/traps.c
1625
printk(KERN_DEBUG "Thread Overflow\n");
arch/mips/kernel/traps.c
1628
printk(KERN_DEBUG "Invalid YIELD Qualifier\n");
arch/mips/kernel/traps.c
1631
printk(KERN_DEBUG "Gating Storage Exception\n");
arch/mips/kernel/traps.c
1634
printk(KERN_DEBUG "YIELD Scheduler Exception\n");
arch/mips/kernel/traps.c
1637
printk(KERN_DEBUG "Gating Storage Scheduler Exception\n");
arch/mips/kernel/traps.c
1640
printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",
arch/mips/kernel/traps.c
166
printk("%sCall Trace:\n", loglvl);
arch/mips/kernel/traps.c
1793
printk(KERN_INFO "Writing ErrCtl register=%08lx\n", errctl);
arch/mips/kernel/traps.c
1798
printk(KERN_INFO "Readback ErrCtl register=%08lx\n", errctl);
arch/mips/kernel/traps.c
1825
printk(KERN_INFO "Enable cache parity protection for "
arch/mips/kernel/traps.c
1840
printk("Cache error exception:\n");
arch/mips/kernel/traps.c
1841
printk("cp0_errorepc == %0*lx\n", field, read_c0_errorepc());
arch/mips/kernel/traps.c
1843
printk("c0_cacheerr == %08x\n", reg_val);
arch/mips/kernel/traps.c
1845
printk("Decoded c0_cacheerr: %s cache fault in %s reference.\n",
arch/mips/kernel/traps.c
186
printk("%sStack :", loglvl);
arch/mips/kernel/traps.c
1869
printk("IDX: 0x%08x\n", reg_val & ((1<<22)-1));
arch/mips/kernel/traps.c
1873
printk("DErrAddr0: 0x%0*lx\n", field, read_c0_derraddr0());
arch/mips/kernel/traps.c
1876
printk("DErrAddr1: 0x%0*lx\n", field, read_c0_derraddr1());
arch/mips/kernel/traps.c
191
printk("%s ", loglvl);
arch/mips/kernel/traps.c
1952
printk(KERN_DEBUG "SDBBP EJTAG debug exception - not handled yet, just ignored!\n");
arch/mips/kernel/traps.c
1955
printk(KERN_DEBUG "c0_depc = %0*lx, DEBUG = %08x\n", field, depc, debug);
arch/mips/kernel/traps.c
1975
printk(KERN_DEBUG "\n\n----- Enable EJTAG single stepping ----\n\n");
arch/mips/kernel/traps.c
236
printk("Code:");
arch/mips/kernel/traps.c
279
printk("$%2d :", i);
arch/mips/kernel/traps.c
293
printk("Acx : %0*lx\n", field, regs->acx);
arch/mips/kernel/traps.c
296
printk("Hi : %0*lx\n", field, regs->hi);
arch/mips/kernel/traps.c
297
printk("Lo : %0*lx\n", field, regs->lo);
arch/mips/kernel/traps.c
303
printk("epc : %0*lx %pS\n", field, regs->cp0_epc,
arch/mips/kernel/traps.c
305
printk("ra : %0*lx %pS\n", field, regs->regs[31],
arch/mips/kernel/traps.c
308
printk("Status: %08x ", (uint32_t) regs->cp0_status);
arch/mips/kernel/traps.c
354
printk("Cause : %08x (ExcCode %02x)\n", cause, exccode);
arch/mips/kernel/traps.c
357
printk("BadVA : %0*lx\n", field, regs->cp0_badvaddr);
arch/mips/kernel/traps.c
359
printk("PrId : %08x (%s)\n", read_c0_prid(),
arch/mips/kernel/traps.c
378
printk("Process %s (pid: %d, threadinfo=%p, task=%p, tls=%0*lx)\n",
arch/mips/kernel/traps.c
386
printk("*HwTLS: %0*lx\n", field, tls);
arch/mips/kernel/traps.c
391
printk("\n");
arch/mips/kernel/traps.c
411
printk("%s[#%d]:\n", str, ++die_counter);
arch/mips/kernel/traps.c
486
printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
arch/mips/lib/dump_tlb.c
137
printk("Index: %2d pgmask=%s ", i, msk2str(pagemask));
arch/mips/lib/dump_tlb.c
179
printk("\n");
arch/mips/lib/iomap-pci.c
33
printk(KERN_WARNING "io_map_base of root PCI bus %s unset. "
arch/mips/lib/r3k_dump_tlb.c
50
printk("Index: %2d ", i);
arch/mips/lib/r3k_dump_tlb.c
63
printk("\n");
arch/mips/loongson2ef/lemote-2f/ec_kb3310b.c
76
printk(KERN_ERR "%s: deadable error : timeout...\n", __func__);
arch/mips/loongson2ef/lemote-2f/ec_kb3310b.c
79
printk(KERN_INFO
arch/mips/loongson2ef/lemote-2f/pm.c
99
printk(KERN_INFO "%s: irq = %d\n", __func__, irq);
arch/mips/math-emu/ieee754d.c
26
printk("%s", m);
arch/mips/math-emu/ieee754d.c
27
printk("<%08x,%08x>\n", (unsigned) (x.bits >> 32),
arch/mips/math-emu/ieee754d.c
29
printk("\t=");
arch/mips/math-emu/ieee754d.c
33
printk("Nan %c", DPSIGN(x) ? '-' : '+');
arch/mips/math-emu/ieee754d.c
35
printk("%c", DPMANT(x) & DP_MBIT(i) ? '1' : '0');
arch/mips/math-emu/ieee754d.c
38
printk("%cInfinity", DPSIGN(x) ? '-' : '+');
arch/mips/math-emu/ieee754d.c
41
printk("%cZero", DPSIGN(x) ? '-' : '+');
arch/mips/math-emu/ieee754d.c
44
printk("%c0.", DPSIGN(x) ? '-' : '+');
arch/mips/math-emu/ieee754d.c
46
printk("%c", DPMANT(x) & DP_MBIT(i) ? '1' : '0');
arch/mips/math-emu/ieee754d.c
47
printk("e%d", DPBEXP(x) - DP_EBIAS);
arch/mips/math-emu/ieee754d.c
50
printk("%c1.", DPSIGN(x) ? '-' : '+');
arch/mips/math-emu/ieee754d.c
52
printk("%c", DPMANT(x) & DP_MBIT(i) ? '1' : '0');
arch/mips/math-emu/ieee754d.c
53
printk("e%d", DPBEXP(x) - DP_EBIAS);
arch/mips/math-emu/ieee754d.c
56
printk("Illegal/Unknown IEEE754 value class");
arch/mips/math-emu/ieee754d.c
58
printk("\n");
arch/mips/math-emu/ieee754d.c
66
printk("%s=", m);
arch/mips/math-emu/ieee754d.c
67
printk("<%08x>\n", (unsigned) x.bits);
arch/mips/math-emu/ieee754d.c
68
printk("\t=");
arch/mips/math-emu/ieee754d.c
72
printk("Nan %c", SPSIGN(x) ? '-' : '+');
arch/mips/math-emu/ieee754d.c
74
printk("%c", SPMANT(x) & SP_MBIT(i) ? '1' : '0');
arch/mips/math-emu/ieee754d.c
77
printk("%cInfinity", SPSIGN(x) ? '-' : '+');
arch/mips/math-emu/ieee754d.c
80
printk("%cZero", SPSIGN(x) ? '-' : '+');
arch/mips/math-emu/ieee754d.c
83
printk("%c0.", SPSIGN(x) ? '-' : '+');
arch/mips/math-emu/ieee754d.c
85
printk("%c", SPMANT(x) & SP_MBIT(i) ? '1' : '0');
arch/mips/math-emu/ieee754d.c
86
printk("e%d", SPBEXP(x) - SP_EBIAS);
arch/mips/math-emu/ieee754d.c
89
printk("%c1.", SPSIGN(x) ? '-' : '+');
arch/mips/math-emu/ieee754d.c
91
printk("%c", SPMANT(x) & SP_MBIT(i) ? '1' : '0');
arch/mips/math-emu/ieee754d.c
92
printk("e%d", SPBEXP(x) - SP_EBIAS);
arch/mips/math-emu/ieee754d.c
95
printk("Illegal/Unknown IEEE754 value class");
arch/mips/math-emu/ieee754d.c
97
printk("\n");
arch/mips/mm/c-r4k.c
1553
printk("MIPS secondary cache %ldkB, %s, linesize %d bytes.\n",
arch/mips/mm/c-r4k.c
1578
printk("Unified secondary cache %ldkB %s, linesize %d bytes.\n",
arch/mips/mm/cerr-sb1.c
101
printk(" coherency,");
arch/mips/mm/cerr-sb1.c
104
printk(" duptags,");
arch/mips/mm/cerr-sb1.c
107
printk(" NO CAUSE,");
arch/mips/mm/cerr-sb1.c
111
printk(" NO TYPE");
arch/mips/mm/cerr-sb1.c
114
printk(" multi-err");
arch/mips/mm/cerr-sb1.c
116
printk(" tag-state");
arch/mips/mm/cerr-sb1.c
118
printk(" tag-address");
arch/mips/mm/cerr-sb1.c
120
printk(" data-SBE");
arch/mips/mm/cerr-sb1.c
122
printk(" data-DBE");
arch/mips/mm/cerr-sb1.c
124
printk(" external");
arch/mips/mm/cerr-sb1.c
126
printk("\n");
arch/mips/mm/cerr-sb1.c
147
printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
arch/mips/mm/cerr-sb1.c
148
printk("\nLast recorded signature:\n");
arch/mips/mm/cerr-sb1.c
149
printk("Request %02x from %d, answered by %d with Dcode %d\n",
arch/mips/mm/cerr-sb1.c
155
printk("Last L2 tag w/ bad ECC: %016llx\n", l2_tag);
arch/mips/mm/cerr-sb1.c
158
printk("Bus watcher indicates no error\n");
arch/mips/mm/cerr-sb1.c
173
printk("Trace buffer frozen\n");
arch/mips/mm/cerr-sb1.c
176
printk("Cache error exception on CPU %x:\n",
arch/mips/mm/cerr-sb1.c
195
printk(" c0_errorepc == %08x\n", eepc);
arch/mips/mm/cerr-sb1.c
196
printk(" c0_errctl == %08x", errctl);
arch/mips/mm/cerr-sb1.c
199
printk(" c0_cerr_i == %08x", cerr_i);
arch/mips/mm/cerr-sb1.c
205
printk(" cerr_i idx doesn't match eepc\n");
arch/mips/mm/cerr-sb1.c
210
printk("...didn't see indicated icache problem\n");
arch/mips/mm/cerr-sb1.c
215
printk(" c0_cerr_d == %08x", cerr_d);
arch/mips/mm/cerr-sb1.c
218
printk(" c0_cerr_dpa == %010llx\n", cerr_dpa);
arch/mips/mm/cerr-sb1.c
223
printk("...didn't see indicated dcache problem\n");
arch/mips/mm/cerr-sb1.c
226
printk(" cerr_d idx doesn't match cerr_dpa\n");
arch/mips/mm/cerr-sb1.c
231
printk("...didn't see indicated problem\n");
arch/mips/mm/cerr-sb1.c
329
printk("Icache index 0x%04x ", addr);
arch/mips/mm/cerr-sb1.c
349
printk("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n",
arch/mips/mm/cerr-sb1.c
364
printk(" ** bad parity in VTag0/G/ASID\n");
arch/mips/mm/cerr-sb1.c
368
printk(" ** bad parity in R/VTag1\n");
arch/mips/mm/cerr-sb1.c
373
printk(" ** bad parity for valid bit\n");
arch/mips/mm/cerr-sb1.c
376
printk(" %d [VA %016llx] [Vld? %d] raw tags: %08X-%016llX\n",
arch/mips/mm/cerr-sb1.c
402
printk(" ** bad parity in predecode\n");
arch/mips/mm/cerr-sb1.c
407
printk(" ** bad parity in instruction a\n");
arch/mips/mm/cerr-sb1.c
411
printk(" ** bad parity in instruction b\n");
arch/mips/mm/cerr-sb1.c
414
printk(" %05X-%08X%08X", datahi, insta, instb);
arch/mips/mm/cerr-sb1.c
416
printk("\n");
arch/mips/mm/cerr-sb1.c
484
printk("Dcache index 0x%04x ", addr);
arch/mips/mm/cerr-sb1.c
504
printk("[Bank %d Set 0x%02x] LRU > %d %d %d %d > MRU\n",
arch/mips/mm/cerr-sb1.c
514
printk(" %d [PA %010llx] [state %s (%02x)] raw tags: %08X-%016llX\n",
arch/mips/mm/cerr-sb1.c
518
printk(" ** bad parity in PTag1\n");
arch/mips/mm/cerr-sb1.c
522
printk(" ** bad parity in PTag0\n");
arch/mips/mm/cerr-sb1.c
559
printk(" %02X-%016llX", datahi, datalo);
arch/mips/mm/cerr-sb1.c
561
printk("\n");
arch/mips/mm/cerr-sb1.c
563
printk(" dwords w/ bad ECC: %d %d %d %d\n",
arch/mips/mm/cerr-sb1.c
67
printk(" recoverable");
arch/mips/mm/cerr-sb1.c
69
printk(" dcache");
arch/mips/mm/cerr-sb1.c
71
printk(" icache");
arch/mips/mm/cerr-sb1.c
73
printk(" multiple-buserr");
arch/mips/mm/cerr-sb1.c
74
printk("\n");
arch/mips/mm/cerr-sb1.c
80
printk(" tag-parity");
arch/mips/mm/cerr-sb1.c
82
printk(" data-parity");
arch/mips/mm/cerr-sb1.c
84
printk(" external");
arch/mips/mm/cerr-sb1.c
85
printk("\n");
arch/mips/mm/cerr-sb1.c
92
printk(" load,");
arch/mips/mm/cerr-sb1.c
95
printk(" store,");
arch/mips/mm/cerr-sb1.c
98
printk(" fill/wb,");
arch/mips/mm/fault.c
233
printk(KERN_ALERT "CPU %d Unable to handle kernel paging request at "
arch/mips/mm/fault.c
262
printk("do_page_fault() #3: sending SIGBUS to %s for "
arch/mips/mm/fault.c
53
printk("Cpu%d[%s:%d:%0*lx:%ld:%0*lx]\n", raw_smp_processor_id(),
arch/mips/mm/init.c
411
printk(KERN_WARNING "This processor doesn't support highmem."
arch/mips/mm/init.c
478
printk(KERN_INFO "Freeing %s: %ldk freed\n", what, (end - begin) >> 10);
arch/mips/mm/sc-ip22.c
106
printk("Enabling R4600 SCACHE\n");
arch/mips/mm/sc-ip22.c
136
printk("Disabling R4600 SCACHE\n");
arch/mips/mm/sc-ip22.c
168
printk(KERN_INFO "R4600/R5000 SCACHE size %dK, linesize 32 bytes.\n",
arch/mips/mm/sc-ip22.c
78
printk("indy_sc_wback_invalidate[%08lx,%08lx]", addr, size);
arch/mips/mm/sc-r5k.c
88
printk("R5000 SCACHE size %ldkB, linesize 32 bytes.\n",
arch/mips/mm/sc-rm7k.c
242
printk(KERN_INFO "Secondary cache size %dK, linesize %d bytes.\n",
arch/mips/mm/tlb-r3k.c
116
printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", start, end);
arch/mips/mm/tlb-r3k.c
157
printk("[tlbpage<%lu,0x%08lx>]", cpu_context(cpu, vma->vm_mm), page);
arch/mips/mm/tlb-r3k.c
195
printk("update_mmu_cache: Wheee, bogus tlbpid mmpid=%lu tlbpid=%d\n",
arch/mips/mm/tlb-r3k.c
227
printk("[tlbwired<entry lo0 %8x, hi %8x\n>]\n",
arch/mips/mm/tlb-r3k.c
60
printk("[tlball]");
arch/mips/mm/tlb-r3k.c
78
printk("[tlbrange<%lu,0x%08lx,0x%08lx>]",
arch/mips/mm/tlb-r4k.c
482
printk(KERN_WARNING
arch/mips/mm/tlb-r4k.c
833
printk("Restricting TLB to %d entries\n", ntlb);
arch/mips/mm/tlb-r4k.c
835
printk("Ignoring invalid argument ntlb=%d\n", ntlb);
arch/mips/mti-malta/malta-time.c
236
printk("CPU frequency %d.%02d MHz\n", freq/1000000,
arch/mips/mti-malta/malta-time.c
246
printk("GIC frequency %d.%02d MHz\n", freq/1000000,
arch/mips/pci/fixup-cobalt.c
118
printk(KERN_INFO "Galileo: revision %u\n", dev->revision);
arch/mips/pci/fixup-cobalt.c
159
printk(KERN_INFO "Cobalt board ID: %d\n", cobalt_board_id);
arch/mips/pci/fixup-cobalt.c
61
printk(KERN_INFO "Galileo: fixed bridge class\n");
arch/mips/pci/fixup-fuloong2e.c
131
printk(KERN_INFO"via686b fix: ISA bridge done\n");
arch/mips/pci/fixup-fuloong2e.c
136
printk(KERN_INFO"via686b fix: IDE\n");
arch/mips/pci/fixup-fuloong2e.c
164
printk(KERN_INFO"via686b fix: IDE done\n");
arch/mips/pci/fixup-fuloong2e.c
65
printk(KERN_INFO "via686b fix: ISA bridge\n");
arch/mips/pci/fixup-lemote2f.c
57
printk(KERN_INFO "slot: %d, pin: %d, irq: %d\n", slot, pin,
arch/mips/pci/fixup-lemote2f.c
83
printk(KERN_INFO "strange PCI slot number.\n");
arch/mips/pci/ops-bcm63xx.c
447
printk(KERN_ERR "bcm63xx: both PCI and cardbus devices "
arch/mips/pci/ops-bcm63xx.c
452
printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n",
arch/mips/pci/ops-mace.c
14
# define DPRINTK(args...) printk(args);
arch/mips/pci/ops-tx4927.c
232
printk(KERN_INFO
arch/mips/pci/ops-tx4927.c
360
printk(KERN_DEBUG
arch/mips/pci/ops-tx4927.c
400
printk(KERN_ERR "");
arch/mips/pci/ops-tx4927.c
402
printk(KERN_CONT "pcistat:%04x(", pcistatus);
arch/mips/pci/ops-tx4927.c
405
printk(KERN_CONT "%s%s",
arch/mips/pci/ops-tx4927.c
407
printk(KERN_CONT ") ");
arch/mips/pci/ops-tx4927.c
410
printk(KERN_CONT "g2pstatus:%08x(", g2pstatus);
arch/mips/pci/ops-tx4927.c
413
printk(KERN_CONT "%s%s",
arch/mips/pci/ops-tx4927.c
415
printk(KERN_CONT ") ");
arch/mips/pci/ops-tx4927.c
418
printk(KERN_CONT "pcicstatus:%08x(", pcicstatus);
arch/mips/pci/ops-tx4927.c
421
printk(KERN_CONT "%s%s",
arch/mips/pci/ops-tx4927.c
423
printk(KERN_CONT ")");
arch/mips/pci/ops-tx4927.c
425
printk(KERN_CONT "\n");
arch/mips/pci/ops-tx4927.c
443
printk(KERN_INFO "tx4927 pcic (0x%p) settings:", pcicptr);
arch/mips/pci/ops-tx4927.c
446
printk(KERN_CONT "\n");
arch/mips/pci/ops-tx4927.c
447
printk(KERN_INFO "%04x:", i);
arch/mips/pci/ops-tx4927.c
454
printk(KERN_CONT " XXXXXXXX");
arch/mips/pci/ops-tx4927.c
457
printk(KERN_CONT " %08x", __raw_readl(preg));
arch/mips/pci/ops-tx4927.c
459
printk(KERN_CONT "\n");
arch/mips/pci/ops-tx4927.c
479
printk(KERN_WARNING "PCIERR interrupt at 0x%0*lx\n",
arch/mips/pci/ops-tx4927.c
521
printk(KERN_INFO "PCI: Use Fixed Park Master (REQPORT %08x)\n",
arch/mips/pci/pci-alchemy.c
26
#define DBG(x...) printk(KERN_DEBUG x)
arch/mips/pci/pci-bcm1480.c
217
printk
arch/mips/pci/pci-bcm63xx.c
284
printk(KERN_WARNING "bcm63xx: this CPU "
arch/mips/pci/pci-ip32.c
133
printk("MACE PCI rev %d\n", mace->pci.rev);
arch/mips/pci/pci-ip32.c
39
printk("MACEPCI: Master abort at 0x%08x (%c)\n", addr, s);
arch/mips/pci/pci-ip32.c
43
printk("MACEPCI: Target abort at 0x%08x (%c)\n", addr, s);
arch/mips/pci/pci-ip32.c
47
printk("MACEPCI: Data parity error at 0x%08x (%c)\n", addr, s);
arch/mips/pci/pci-ip32.c
51
printk("MACEPCI: Retry error at 0x%08x (%c)\n", addr, s);
arch/mips/pci/pci-ip32.c
55
printk("MACEPCI: Illegal command at 0x%08x (%c)\n", addr, s);
arch/mips/pci/pci-ip32.c
59
printk("MACEPCI: System error at 0x%08x (%c)\n", addr, s);
arch/mips/pci/pci-ip32.c
63
printk("MACEPCI: Parity error at 0x%08x (%c)\n", addr, s);
arch/mips/pci/pci-ip32.c
67
printk("MACEPCI: Overrun error at 0x%08x (%c)\n", addr, s);
arch/mips/pci/pci-ip32.c
71
printk("MACEPCI: Signaled target abort (clearing)\n");
arch/mips/pci/pci-ip32.c
75
printk("MACEPCI: Interrupt test triggered (clearing)\n");
arch/mips/pci/pci-legacy.c
219
printk(KERN_WARNING
arch/mips/pci/pci-legacy.c
236
printk(KERN_WARNING
arch/mips/pci/pci-sb1250.c
228
printk
arch/mips/rb532/devices.c
321
printk(KERN_ERR "rb532: cannot remap device controller 3\n");
arch/mips/rb532/devices.c
364
printk(KERN_INFO "korina mac = %s\n", s);
arch/mips/rb532/devices.c
366
printk(KERN_ERR "Invalid mac\n");
arch/mips/rb532/prom.c
112
printk(KERN_ERR "Unable to remap DDR register\n");
arch/mips/rb532/setup.c
55
printk(KERN_ERR "Could not remap PCI registers\n");
arch/mips/rb532/time.c
44
printk(KERN_INFO "calculating r4koff... ");
arch/mips/rb532/time.c
46
printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
arch/mips/rb532/time.c
51
printk(KERN_INFO "CPU frequency %d.%02d MHz\n", est_freq / 1000000,
arch/mips/sgi-ip22/ip22-berr.c
48
printk(KERN_ERR "MC Bus Error\n");
arch/mips/sgi-ip22/ip22-berr.c
50
printk(KERN_ERR "HPC3 Bus Error 0x%x:<id=0x%x,%s,lane=0x%x>\n",
arch/mips/sgi-ip22/ip22-berr.c
57
printk(KERN_ERR "EISA Bus Error\n");
arch/mips/sgi-ip22/ip22-berr.c
59
printk(KERN_ERR "CPU error 0x%x<%s%s%s%s%s%s> @ 0x%08x\n",
arch/mips/sgi-ip22/ip22-berr.c
69
printk(KERN_ERR "GIO error 0x%x:<%s%s%s%s%s%s%s%s> @ 0x%08x\n",
arch/mips/sgi-ip22/ip22-berr.c
96
printk(KERN_ALERT "%s bus error, epc == %0*lx, ra == %0*lx\n",
arch/mips/sgi-ip22/ip22-eisa.c
101
printk(KERN_INFO "EISA: bus not present.\n");
arch/mips/sgi-ip22/ip22-eisa.c
105
printk(KERN_INFO "EISA: Probing bus...\n");
arch/mips/sgi-ip22/ip22-eisa.c
108
printk(KERN_INFO "EISA: slot %d : %s detected.\n",
arch/mips/sgi-ip22/ip22-eisa.c
113
printk(KERN_INFO "EISA: Detected %d card%s.\n", c, c < 2 ? "" : "s");
arch/mips/sgi-ip22/ip22-eisa.c
115
printk(KERN_INFO "ISA support compiled in.\n");
arch/mips/sgi-ip22/ip22-eisa.c
87
printk(KERN_ERR "eisa_irq %d out of bound\n", eisa_irq);
arch/mips/sgi-ip22/ip22-gio.c
351
printk(KERN_INFO "GIO: slot %d : %s (id %x)\n",
arch/mips/sgi-ip22/ip22-gio.c
367
printk(KERN_INFO "GIO: slot %d : Empty\n", slotno);
arch/mips/sgi-ip22/ip22-gio.c
399
printk(KERN_INFO "GIO: Probing bus...\n");
arch/mips/sgi-ip22/ip22-mc.c
58
printk(KERN_INFO "MC: Probing memory configuration:\n");
arch/mips/sgi-ip22/ip22-mc.c
66
printk(KERN_INFO " bank%d: %3ldM @ %08lx\n",
arch/mips/sgi-ip22/ip22-mc.c
83
printk(KERN_INFO "MC: SGI memory controller Revision %d\n",
arch/mips/sgi-ip22/ip22-reset.c
193
printk(KERN_ERR "Allocation of front panel IRQ failed\n");
arch/mips/sgi-ip22/ip22-time.c
101
printk("disagreement, using average... ");
arch/mips/sgi-ip22/ip22-time.c
108
printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick,
arch/mips/sgi-ip22/ip22-time.c
127
printk(KERN_ALERT "Oops, got 8254 interrupt.\n");
arch/mips/sgi-ip22/ip22-time.c
83
printk(KERN_INFO "Calibrating system timer... ");
arch/mips/sgi-ip22/ip22-time.c
95
printk("warning: timer counts differ, retrying... ");
arch/mips/sgi-ip22/ip28-berr.c
175
printk(KERN_ERR "Cache tags @ %08x:\n", (unsigned)cache_tags.err_addr);
arch/mips/sgi-ip22/ip28-berr.c
185
printk(KERN_ERR
arch/mips/sgi-ip22/ip28-berr.c
196
printk(KERN_ERR
arch/mips/sgi-ip22/ip28-berr.c
207
printk(KERN_ERR "S: 0: %08x %08x, 1: %08x %08x (PA[%u:%u] %05x)\n",
arch/mips/sgi-ip22/ip28-berr.c
245
printk(KERN_ERR "MC Bus Error\n");
arch/mips/sgi-ip22/ip28-berr.c
249
printk(KERN_ERR "HPC3 Bus Error 0x%x:<id=0x%x,%s,lane=0x%x>\n",
arch/mips/sgi-ip22/ip28-berr.c
258
printk(KERN_ERR "EISA Bus Error\n");
arch/mips/sgi-ip22/ip28-berr.c
262
printk(KERN_ERR "CPU error 0x%x<%s%s%s%s%s%s> @ 0x%08x\n",
arch/mips/sgi-ip22/ip28-berr.c
274
printk(KERN_ERR "GIO error 0x%x:<%s%s%s%s%s%s%s%s> @ 0x%08x\n",
arch/mips/sgi-ip22/ip28-berr.c
288
printk(KERN_ERR "MC: Hmm, didn't find any error condition.\n");
arch/mips/sgi-ip22/ip28-berr.c
290
printk(KERN_ERR "CP0: config %08x, "
arch/mips/sgi-ip22/ip28-berr.c
299
printk(KERN_ALERT "%s, epc == %0*lx, ra == %0*lx\n",
arch/mips/sgi-ip22/ip28-berr.c
412
printk(KERN_ERR "at DMA addresses: HPC3 @ %08lx:"
arch/mips/sgi-ip22/ip28-berr.c
419
printk(KERN_ERR "at GIO DMA: mem address 0x%08x.\n",
arch/mips/sgi-ip22/ip28-berr.c
424
printk(KERN_ERR "at GIO DMA: gio address 0x%08x.\n",
arch/mips/sgi-ip22/ip28-berr.c
431
printk(KERN_ERR "discarded!\n");
arch/mips/sgi-ip27/ip27-berr.c
71
printk("Slice %c got %cbe at 0x%lx\n", 'A' + cpu, data ? 'd' : 'i',
arch/mips/sgi-ip27/ip27-berr.c
73
printk("Hub information:\n");
arch/mips/sgi-ip27/ip27-berr.c
74
printk("ERR_INT_PEND = 0x%06llx\n", LOCAL_HUB_L(PI_ERR_INT_PEND));
arch/mips/sgi-ip27/ip27-init.c
104
printk("IP27: Running on node %d.\n", nid);
arch/mips/sgi-ip27/ip27-init.c
108
printk("Node %d has %s primary CPU%s.\n", nid,
arch/mips/sgi-ip27/ip27-init.c
114
printk("Node %d has %s secondary CPU%s.\n", nid,
arch/mips/sgi-ip27/ip27-init.c
123
printk("Machine is in %c mode.\n", n_mode ? 'N' : 'M');
arch/mips/sgi-ip27/ip27-klconfig.c
30
printk("find_component: Bad pointer: 0x%p\n", kli);
arch/mips/sgi-ip27/ip27-klnuma.c
69
printk("REPLICATION: ON nasid %d, ktext from nasid %d, kdata from nasid %d\n", client_nasid, server_nasid, master_nasid);
arch/mips/sgi-ip27/ip27-reset.c
44
printk("Reboot started from CPU %d\n", smp_processor_id());
arch/mips/sgi-ip27/ip27-smp.c
83
printk("Discovered %d cpus on %d nodes\n", highest + 1, num_online_nodes());
arch/mips/sgi-ip32/crime.c
101
printk("CRIME CPU error at 0x%09lx status 0x%08lx\n", addr, stat);
arch/mips/sgi-ip32/crime.c
40
printk(KERN_INFO "CRIME id %1x rev %d at 0x%0*lx\n",
arch/mips/sgi-ip32/crime.c
52
printk("CRIME memory error at 0x%08lx ST 0x%08lx<", addr, stat);
arch/mips/sgi-ip32/crime.c
55
printk("INV,");
arch/mips/sgi-ip32/crime.c
61
printk("ECC,SYN=0x%08lx,GEN=0x%08lx,", ecc_syn, ecc_gen);
arch/mips/sgi-ip32/crime.c
65
printk("MULTIPLE,");
arch/mips/sgi-ip32/crime.c
69
printk("HARD,");
arch/mips/sgi-ip32/crime.c
72
printk("SOFT,");
arch/mips/sgi-ip32/crime.c
74
printk("CPU,");
arch/mips/sgi-ip32/crime.c
76
printk("VICE,");
arch/mips/sgi-ip32/crime.c
78
printk("GBE,");
arch/mips/sgi-ip32/crime.c
80
printk("RE,REID=0x%02lx,", (stat & CRIME_MEM_ERROR_RE_ID)>>8);
arch/mips/sgi-ip32/crime.c
82
printk("MACE,MACEID=0x%02lx,", stat & CRIME_MEM_ERROR_MACE_ID);
arch/mips/sgi-ip32/crime.c
87
printk("FATAL>\n");
arch/mips/sgi-ip32/crime.c
90
printk("NONFATAL>\n");
arch/mips/sgi-ip32/ip32-berr.c
30
printk("Got %cbe at 0x%lx\n", data ? 'd' : 'i', regs->cp0_epc);
arch/mips/sgi-ip32/ip32-irq.c
331
printk("Unknown interrupt occurred!\n");
arch/mips/sgi-ip32/ip32-irq.c
332
printk("cp0_status: %08x\n", read_c0_status());
arch/mips/sgi-ip32/ip32-irq.c
333
printk("cp0_cause: %08x\n", read_c0_cause());
arch/mips/sgi-ip32/ip32-irq.c
334
printk("CRIME intr mask: %016lx\n", crime->imask);
arch/mips/sgi-ip32/ip32-irq.c
335
printk("CRIME intr status: %016lx\n", crime->istat);
arch/mips/sgi-ip32/ip32-irq.c
336
printk("CRIME hardware intr register: %016lx\n", crime->hard_int);
arch/mips/sgi-ip32/ip32-irq.c
337
printk("MACE ISA intr mask: %08lx\n", mace->perif.ctrl.imask);
arch/mips/sgi-ip32/ip32-irq.c
338
printk("MACE ISA intr status: %08lx\n", mace->perif.ctrl.istat);
arch/mips/sgi-ip32/ip32-irq.c
339
printk("MACE PCI control register: %08x\n", mace->pci.control);
arch/mips/sgi-ip32/ip32-irq.c
341
printk("Register dump:\n");
arch/mips/sgi-ip32/ip32-irq.c
344
printk("Please mail this report to linux-mips@vger.kernel.org\n");
arch/mips/sgi-ip32/ip32-irq.c
345
printk("Spinning...");
arch/mips/sgi-ip32/ip32-memory.c
39
printk("CRIME MC: bank %u base 0x%016Lx size %LuMiB\n",
arch/mips/sgi-ip32/ip32-setup.c
68
printk(KERN_INFO "Calibrating system timer... ");
arch/mips/sgi-ip32/ip32-setup.c
73
printk("%d MHz CPU detected\n", mips_hpt_frequency * 2 / 1000000);
arch/mips/sibyte/bcm1480/setup.c
116
printk("Restart after failure to identify SiByte chip\n");
arch/mips/sibyte/bcm1480/setup.c
123
printk("Broadcom SiByte %s %s @ %d MHz (SB-1A rev %d)\n",
arch/mips/sibyte/bcm1480/setup.c
125
printk("Board type: %s\n", get_system_type());
arch/mips/sibyte/bcm1480/setup.c
59
printk("Unknown %s rev %x\n", soc_str, soc_pass);
arch/mips/sibyte/bcm1480/setup.c
96
printk("Unknown part type %x\n", part_type);
arch/mips/sibyte/bcm1480/smp.c
115
printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
arch/mips/sibyte/bcm1480/smp.c
141
printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
arch/mips/sibyte/common/bus_watcher.c
139
printk(KERN_INFO "Unable to initialize bus_watcher /proc entry\n");
arch/mips/sibyte/common/bus_watcher.c
165
printk("%016llx\n",
arch/mips/sibyte/common/bus_watcher.c
198
printk("Failed to register bus watcher BAD_ECC irq\n");
arch/mips/sibyte/common/bus_watcher.c
203
printk("Failed to register bus watcher COR_ECC irq\n");
arch/mips/sibyte/common/bus_watcher.c
209
printk("Failed to register bus watcher IO_BUS irq\n");
arch/mips/sibyte/common/bus_watcher.c
50
printk("Bus watcher error counters: %08x %08x\n", l2_err, memio_err);
arch/mips/sibyte/common/bus_watcher.c
51
printk("\nLast recorded signature:\n");
arch/mips/sibyte/common/bus_watcher.c
52
printk("Request %02x from %d, answered by %d with Dcode %d\n",
arch/mips/sibyte/common/bus_watcher.c
82
printk("Using last values reaped by bus watcher driver\n");
arch/mips/sibyte/common/bus_watcher.c
93
printk("Bus watcher indicates no error\n");
arch/mips/sibyte/common/cfe.c
191
printk("Found initrd of %lx@%lx\n", initrd_size, initrd_start);
arch/mips/sibyte/common/cfe.c
194
printk("Bad initrd argument. Disabling initrd\n");
arch/mips/sibyte/common/cfe.c
251
printk("CFE's entrypoint seal doesn't match. Spinning.");
arch/mips/sibyte/common/cfe.c
264
printk("LINUX_CMDLINE not defined in cfe.");
arch/mips/sibyte/common/cfe.c
58
printk("Passing control back to CFE...\n");
arch/mips/sibyte/common/cfe.c
60
printk("cfe_exit returned??\n");
arch/mips/sibyte/common/sb_tbprof.c
243
printk(DEVNAME ": unexpected pc_intr");
arch/mips/sibyte/common/sb_tbprof.c
549
printk(KERN_WARNING DEVNAME ": initialization failed (dev %d)\n",
arch/mips/sibyte/sb1250/setup.c
126
printk("Unknown %s rev %x\n", soc_str, soc_pass);
arch/mips/sibyte/sb1250/setup.c
160
printk("Unknown SOC type %x\n", soc_type);
arch/mips/sibyte/sb1250/setup.c
180
printk("Restart after failure to identify SiByte chip\n");
arch/mips/sibyte/sb1250/setup.c
187
printk("Broadcom SiByte %s %s @ %d MHz (SB1 rev %d)\n",
arch/mips/sibyte/sb1250/setup.c
189
printk("Board type: %s\n", get_system_type());
arch/mips/sibyte/sb1250/setup.c
193
printk("@@@@ This is a BCM1250 A0-A2 (Pass 1) board, "
arch/mips/sibyte/sb1250/setup.c
202
printk("@@@@ This is a BCM1250 A3-A10 board, and the "
arch/mips/sibyte/sb1250/setup.c
208
printk("@@@@ Prefetches may be enabled in this kernel, "
arch/mips/sibyte/sb1250/setup.c
215
printk("@@@@ This is a BCM1250 B1/B2. board, and the "
arch/mips/sibyte/sb1250/setup.c
222
printk("@@@@ This is a BCM1250 B1/B2, but the kernel is "
arch/mips/sibyte/sb1250/setup.c
231
printk("Invalid configuration for this chip.\n");
arch/mips/sibyte/sb1250/setup.c
70
printk("Unknown BCM1250 rev %x\n", soc_pass);
arch/mips/sibyte/sb1250/smp.c
104
printk("cfe_start_cpu(%i) returned %i\n" , cpu, retval);
arch/mips/sibyte/sb1250/smp.c
130
printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
arch/mips/sibyte/swarm/setup.c
63
printk("DBE physical address: %010Lx\n",
arch/mips/sibyte/swarm/swarm-i2c.c
26
printk(KERN_ERR
arch/mips/sni/pcimt.c
32
printk("Second level cache is deactivated.\n");
arch/mips/sni/pcimt.c
36
printk("Invalid second level cache size configured, "
arch/mips/sni/pcimt.c
43
printk("%dkb second level cache detected, deactivating.\n", sc_size);
arch/mips/sni/pcimt.c
67
printk("%s.\n", boardtype);
arch/mips/sni/rm200.c
269
printk(KERN_DEBUG
arch/mips/sni/setup.c
105
printk("%02x ", *(unsigned char *) (SNI_IDPROM_BASE + i));
arch/mips/sni/setup.c
108
printk("\n");
arch/mips/sni/time.c
127
printk(KERN_INFO "Calibrating system timer... ");
arch/mips/sni/time.c
139
printk("warning: timer counts differ, retrying... ");
arch/mips/sni/time.c
145
printk("disagreement, using average... ");
arch/mips/sni/time.c
152
printk("%d [%d.%04d MHz CPU]\n", (int) r4k_tick,
arch/nios2/kernel/traps.c
101
printk("%s [<%08lx>]", loglvl, addr);
arch/nios2/kernel/traps.c
105
printk("%s\n", loglvl);
arch/nios2/kernel/traps.c
76
printk("%sStack from %08lx:", loglvl, (unsigned long)stack);
arch/nios2/kernel/traps.c
81
printk("%s\n ", loglvl);
arch/nios2/kernel/traps.c
82
printk("%s %08lx", loglvl, *stack++);
arch/nios2/kernel/traps.c
85
printk("%s\nCall Trace:", loglvl);
arch/openrisc/include/asm/pgtable.h
342
printk(KERN_ERR "%s:%d: bad pte %p(%08lx).\n", \
arch/openrisc/include/asm/pgtable.h
345
printk(KERN_ERR "%s:%d: bad pgd %p(%08lx).\n", \
arch/openrisc/kernel/cacheinfo.c
38
printk(KERN_INFO
arch/openrisc/kernel/cacheinfo.c
51
printk(KERN_INFO
arch/openrisc/kernel/cacheinfo.c
56
printk(KERN_INFO "-- dcache disabled\n");
arch/openrisc/kernel/cacheinfo.c
66
printk(KERN_INFO
arch/openrisc/kernel/cacheinfo.c
71
printk(KERN_INFO "-- icache disabled\n");
arch/openrisc/kernel/process.c
85
printk(KERN_INFO "*** MACHINE HALT ***\n");
arch/openrisc/kernel/process.c
92
printk(KERN_INFO "*** MACHINE POWER OFF ***\n");
arch/openrisc/kernel/setup.c
107
printk(KERN_INFO "CPU: OpenRISC-%x (revision %d) @%d MHz\n",
arch/openrisc/kernel/setup.c
111
printk(KERN_INFO
arch/openrisc/kernel/setup.c
117
printk(KERN_INFO "-- dmmu: %4d entries, %lu way(s)\n",
arch/openrisc/kernel/setup.c
121
printk(KERN_INFO "-- immu: %4d entries, %lu way(s)\n",
arch/openrisc/kernel/setup.c
125
printk(KERN_INFO "-- additional features:\n");
arch/openrisc/kernel/setup.c
127
printk(KERN_INFO "-- debug unit\n");
arch/openrisc/kernel/setup.c
129
printk(KERN_INFO "-- performance counters\n");
arch/openrisc/kernel/setup.c
131
printk(KERN_INFO "-- power management\n");
arch/openrisc/kernel/setup.c
133
printk(KERN_INFO "-- PIC\n");
arch/openrisc/kernel/setup.c
135
printk(KERN_INFO "-- timer\n");
arch/openrisc/kernel/setup.c
137
printk(KERN_INFO "-- custom unit(s)\n");
arch/openrisc/kernel/setup.c
152
printk(KERN_WARNING
arch/openrisc/kernel/setup.c
243
printk(KERN_INFO "Initial ramdisk not found\n");
arch/openrisc/kernel/setup.c
247
printk(KERN_INFO "Initial ramdisk at: 0x%p (%lu bytes)\n",
arch/openrisc/kernel/setup.c
260
printk(KERN_INFO "OpenRISC Linux -- http://openrisc.io\n");
arch/openrisc/mm/fault.c
247
printk(KERN_ALERT
arch/openrisc/mm/fault.c
250
printk(KERN_ALERT "Unable to handle kernel access");
arch/openrisc/mm/fault.c
251
printk(" at virtual address 0x%08lx\n", address);
arch/openrisc/mm/init.c
116
printk(KERN_INFO "%s: Memory: 0x%x-0x%x\n", __func__,
arch/openrisc/mm/init.c
125
printk(KERN_INFO "Setting up paging and PTEs.\n");
arch/openrisc/mm/init.c
153
printk(KERN_INFO "itlb_miss_handler %p\n", &itlb_miss_handler);
arch/openrisc/mm/init.c
162
printk(KERN_INFO "dtlb_miss_handler %p\n", &dtlb_miss_handler);
arch/openrisc/mm/init.c
191
printk("mem_init_done ...........................................\n");
arch/parisc/include/asm/floppy.h
100
printk("count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
arch/parisc/include/asm/floppy.h
207
printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
arch/parisc/include/asm/pgtable.h
79
printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
arch/parisc/include/asm/pgtable.h
82
printk("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, (unsigned long)pmd_val(e))
arch/parisc/include/asm/pgtable.h
85
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, (unsigned long)pgd_val(e))
arch/parisc/kernel/cache.c
185
printk("ic_size %lx dc_size %lx it_size %lx\n",
arch/parisc/kernel/cache.c
190
printk("DC base 0x%lx stride 0x%lx count 0x%lx loop 0x%lx\n",
arch/parisc/kernel/cache.c
196
printk("dc_conf = 0x%lx alias %d blk %d line %d shift %d\n",
arch/parisc/kernel/cache.c
202
printk(" wt %d sh %d cst %d hv %d\n",
arch/parisc/kernel/cache.c
208
printk("IC base 0x%lx stride 0x%lx count 0x%lx loop 0x%lx\n",
arch/parisc/kernel/cache.c
214
printk("IT base 0x%lx stride 0x%lx count 0x%lx loop 0x%lx off_base 0x%lx off_stride 0x%lx off_count 0x%lx\n",
arch/parisc/kernel/cache.c
223
printk("DT base 0x%lx stride 0x%lx count 0x%lx loop 0x%lx off_base 0x%lx off_stride 0x%lx off_count 0x%lx\n",
arch/parisc/kernel/cache.c
232
printk("ic_conf = 0x%lx alias %d blk %d line %d shift %d\n",
arch/parisc/kernel/cache.c
238
printk(" wt %d sh %d cst %d hv %d\n",
arch/parisc/kernel/cache.c
244
printk("D-TLB conf: sh %d page %d cst %d aid %d sr %d\n",
arch/parisc/kernel/cache.c
251
printk("I-TLB conf: sh %d page %d cst %d aid %d sr %d\n",
arch/parisc/kernel/cache.c
262
printk(KERN_WARNING "Unexpected TLB configuration. "
arch/parisc/kernel/cache.c
285
printk(KERN_WARNING "parisc_cache_init: Only equivalent aliasing supported!\n");
arch/parisc/kernel/cache.c
570
printk(KERN_DEBUG "Whole cache flush %lu cycles, flushing %lu bytes %lu cycles\n",
arch/parisc/kernel/cache.c
583
printk(KERN_INFO "Cache flush threshold set to %lu KiB\n",
arch/parisc/kernel/cache.c
606
printk(KERN_INFO "Whole TLB flush %lu cycles, Range flush %lu bytes %lu cycles\n",
arch/parisc/kernel/cache.c
610
printk(KERN_INFO "Calculated TLB flush threshold %lu KiB\n",
arch/parisc/kernel/cache.c
615
printk(KERN_INFO "TLB flush threshold set to %lu KiB\n",
arch/parisc/kernel/inventory.c
255
printk(KERN_DEBUG "PAT_ENTITY_PROC: id_eid 0x%lx\n",
arch/parisc/kernel/inventory.c
260
printk(KERN_DEBUG
arch/parisc/kernel/inventory.c
266
printk(KERN_DEBUG "PAT_ENTITY_CA: %ld\n", pcell_loc);
arch/parisc/kernel/inventory.c
270
printk(KERN_DEBUG "PAT_ENTITY_PBC: ");
arch/parisc/kernel/inventory.c
274
printk(KERN_DEBUG "PAT_ENTITY_SBA: ");
arch/parisc/kernel/inventory.c
278
printk(KERN_DEBUG "PAT_ENTITY_LBA: ");
arch/parisc/kernel/inventory.c
283
printk(KERN_DEBUG "ranges %ld\n", pa_pdc_cell->mod[1]);
arch/parisc/kernel/inventory.c
285
printk(KERN_DEBUG
arch/parisc/kernel/inventory.c
290
printk(KERN_DEBUG
arch/parisc/kernel/inventory.c
296
printk(KERN_DEBUG "\n");
arch/parisc/kernel/inventory.c
338
printk("\n\n\n");
arch/parisc/kernel/inventory.c
339
printk(KERN_WARNING "WARNING! Could not get full memory configuration. "
arch/parisc/kernel/inventory.c
348
printk(KERN_WARNING "This Machine has more memory ranges than we support!\n");
arch/parisc/kernel/inventory.c
349
printk(KERN_WARNING "Some memory may not be used!\n");
arch/parisc/kernel/inventory.c
372
printk(KERN_WARNING "This Machine has more memory ranges than we support!\n");
arch/parisc/kernel/inventory.c
373
printk(KERN_WARNING "Some memory will not be used!\n");
arch/parisc/kernel/inventory.c
398
printk(KERN_DEBUG "CELL_GET_NUMBER: 0x%lx 0x%lx\n", cell_info.cell_num,
arch/parisc/kernel/inventory.c
436
printk(KERN_WARNING "This Machine has more memory ranges than we support!\n");
arch/parisc/kernel/inventory.c
437
printk(KERN_WARNING "Some memory will not be used!\n");
arch/parisc/kernel/inventory.c
541
printk(KERN_ERR "%s %s(): memory allocation failure\n",
arch/parisc/kernel/inventory.c
553
printk(KERN_WARNING
arch/parisc/kernel/inventory.c
60
printk(KERN_INFO "Determining PDC firmware type: ");
arch/parisc/kernel/inventory.c
621
printk(KERN_WARNING "Bad memory configuration returned!\n");
arch/parisc/kernel/inventory.c
622
printk(KERN_WARNING "Some memory may not be used!\n");
arch/parisc/kernel/inventory.c
629
printk(KERN_INFO "Searching for devices...\n");
arch/parisc/kernel/inventory.c
650
printk(KERN_INFO "Found devices:\n");
arch/parisc/kernel/irq.c
520
printk(KERN_DEBUG "redirecting irq %d from CPU %d to %d\n",
arch/parisc/kernel/module.c
366
printk(KERN_ERR "%s: zero OPD requested!\n", me->name);
arch/parisc/kernel/module.c
519
printk(KERN_WARNING "%s: Unknown symbol %s\n",
arch/parisc/kernel/module.c
62
printk(KERN_ERR "module %s relocation of symbol %s is out of range (0x%lx in %d bits)\n", \
arch/parisc/kernel/module.c
624
printk(KERN_ERR "module %s: Unknown relocation: %u\n",
arch/parisc/kernel/module.c
663
printk(KERN_WARNING "%s: Unknown symbol %s\n",
arch/parisc/kernel/module.c
676
printk("Symbol %s loc %p val 0x%Lx addend 0x%Lx: %s\n",
arch/parisc/kernel/module.c
792
printk(KERN_ERR "module %s: Unknown relocation: %Lu\n",
arch/parisc/kernel/module.c
844
printk("FINALIZE, ->init FPTR is %p, GP %lx ADDR %lx\n", entry,
arch/parisc/kernel/module.c
847
printk("INSNS: %x %x %x %x\n",
arch/parisc/kernel/module.c
849
printk("got entries used %ld, gots max %ld\n"
arch/parisc/kernel/module.c
877
printk(KERN_ERR "%s: Global Offset Table overflow (used %ld, allowed %d)\n",
arch/parisc/kernel/pci-dma.c
185
printk(KERN_CRIT "Whee.. Swapped out page in kernel page table\n");
arch/parisc/kernel/pci-dma.c
386
printk(KERN_WARNING
arch/parisc/kernel/pci-dma.c
393
printk(KERN_WARNING
arch/parisc/kernel/pci-dma.c
49
#define DBG_RES(x...) printk(x)
arch/parisc/kernel/pci-dma.c
66
printk("res_map: ");
arch/parisc/kernel/pci-dma.c
68
printk("%08lx ", *res_ptr);
arch/parisc/kernel/pci-dma.c
70
printk("\n");
arch/parisc/kernel/pci-dma.c
91
printk(KERN_ERR "map_pte_uncached: page already exists\n");
arch/parisc/kernel/pci.c
111
printk(KERN_WARNING "pci_bios != NULL but init() is!\n");
arch/parisc/kernel/pci.c
127
printk(KERN_WARNING "pci_bios != NULL but fixup_bus() is!\n");
arch/parisc/kernel/pci.c
26
# define DBGC(x...) printk(KERN_DEBUG x)
arch/parisc/kernel/pci.c
263
printk(KERN_ERR "PCI: Too many Host Bus Adapters\n");
arch/parisc/kernel/pci.c
33
#define DBG_RES(x...) printk(KERN_DEBUG x)
arch/parisc/kernel/pdc_chassis.c
139
printk(KERN_INFO "Enabling %s chassis codes support v%s\n",
arch/parisc/kernel/pdc_chassis.c
15
#define DPRINTK(fmt, args...) printk(fmt, ## args)
arch/parisc/kernel/pdc_chassis.c
277
printk(KERN_INFO "Chassis warnings not supported.\n");
arch/parisc/kernel/pdc_chassis.c
281
printk(KERN_INFO "Enabling PDC chassis warnings support v%s\n",
arch/parisc/kernel/perf.c
223
printk("perf_config: perf_stop_counters = %ld\n", error);
arch/parisc/kernel/perf.c
227
printk("Preparing to write image\n");
arch/parisc/kernel/perf.c
231
printk("perf_config: DOWNLOAD = %ld\n", error);
arch/parisc/kernel/perf.c
235
printk("Preparing to start counters\n");
arch/parisc/kernel/perf.c
443
printk(KERN_ERR "perf_off: perf_stop_counters = %ld\n", error_start);
arch/parisc/kernel/perf.c
508
printk("Performance monitoring counters not supported on this processor\n");
arch/parisc/kernel/perf.c
514
printk(KERN_ERR "Performance monitoring counters: "
arch/parisc/kernel/perf.c
524
printk("Performance monitoring counters enabled for %s\n",
arch/parisc/kernel/perf.c
790
printk(KERN_ERR "write_image: cpu_device not yet initialized!\n");
arch/parisc/kernel/perf.c
824
printk("perf_rdr_write\n");
arch/parisc/kernel/perf.c
836
printk("perf_rdr_write done\n");
arch/parisc/kernel/process.c
122
printk("Power off or press RETURN to reboot.\n");
arch/parisc/kernel/process.c
130
printk("Rebooting...\n");
arch/parisc/kernel/processor.c
147
printk(KERN_WARNING "IGNORING CPU at %pa,"
arch/parisc/kernel/processor.c
272
printk(KERN_INFO "capabilities 0x%lx\n",
arch/parisc/kernel/processor.c
299
printk(KERN_INFO "product %s, original product %s, S/N: %s\n",
arch/parisc/kernel/processor.c
345
printk(KERN_INFO "FP[%d] enabled: Rev %ld Model %ld\n",
arch/parisc/kernel/processor.c
355
printk(KERN_WARNING "WARNING: No FP CoProcessor?!"
arch/parisc/kernel/processor.c
90
printk(KERN_INFO "num_online_cpus() >= nr_cpu_ids\n");
arch/parisc/kernel/processor.c
95
printk(KERN_INFO "CONFIG_SMP=n ignoring additional CPUs\n");
arch/parisc/kernel/setup.c
108
printk(KERN_INFO "The 64-bit Kernel has started...\n");
arch/parisc/kernel/setup.c
110
printk(KERN_INFO "The 32-bit Kernel has started...\n");
arch/parisc/kernel/setup.c
113
printk(KERN_INFO "Kernel default page size is %d KB. Huge pages ",
arch/parisc/kernel/setup.c
116
printk(KERN_CONT "enabled with %d MB physical and %d MB virtual size",
arch/parisc/kernel/setup.c
119
printk(KERN_CONT "disabled");
arch/parisc/kernel/setup.c
121
printk(KERN_CONT ".\n");
arch/parisc/kernel/setup.c
125
printk(KERN_INFO "Kernel is using PDC in 32-bit mode.\n");
arch/parisc/kernel/setup.c
202
printk(KERN_ERR
arch/parisc/kernel/setup.c
210
printk(KERN_ERR
arch/parisc/kernel/setup.c
218
printk(KERN_ERR
arch/parisc/kernel/signal.c
44
? printk(__VA_ARGS__) : (void) 0)
arch/parisc/kernel/signal32.c
30
? printk(__VA_ARGS__) : (void) 0)
arch/parisc/kernel/smp.c
180
printk(KERN_CRIT "Unknown IPI num on CPU%d: %lu\n",
arch/parisc/kernel/smp.c
285
printk(KERN_CRIT "CPU#%d already initialized!\n", cpunum);
arch/parisc/kernel/smp.c
367
printk(KERN_INFO "Releasing cpu %d now, hpa=%lx\n", cpuid, p->hpa);
arch/parisc/kernel/smp.c
395
printk(KERN_CRIT "SMP: CPU:%d is stuck.\n", cpuid);
arch/parisc/kernel/smp.c
54
printk(printargs);
arch/parisc/kernel/sys_parisc32.c
22
printk(KERN_ERR "%s(%d): Unimplemented 32 on 64 syscall #%d!\n",
arch/parisc/kernel/time.c
191
printk(KERN_ERR "Error reading tod clock\n");
arch/parisc/kernel/traps.c
116
printk("%s\n", level);
arch/parisc/kernel/traps.c
117
printk("%s VZOUICununcqcqcqcqcqcrmunTDVZOUI\n", level);
arch/parisc/kernel/traps.c
119
printk("%sFPSR: %s\n", level, buf);
arch/parisc/kernel/traps.c
120
printk("%sFPER1: %08x\n", level, s.sw[1]);
arch/parisc/kernel/traps.c
148
printk("%s\n", level);
arch/parisc/kernel/traps.c
149
printk("%sIASQ: " RFMT " " RFMT " IAOQ: " RFMT " " RFMT "\n",
arch/parisc/kernel/traps.c
151
printk("%s IIR: %08lx ISR: " RFMT " IOR: " RFMT "\n",
arch/parisc/kernel/traps.c
153
printk("%s CPU: %8d CR30: " RFMT " CR31: " RFMT "\n",
arch/parisc/kernel/traps.c
155
printk("%s ORIG_R28: " RFMT "\n", level, regs->orig_r28);
arch/parisc/kernel/traps.c
158
printk("%s IAOQ[0]: " RFMT "\n", level, regs->iaoq[0]);
arch/parisc/kernel/traps.c
159
printk("%s IAOQ[1]: " RFMT "\n", level, regs->iaoq[1]);
arch/parisc/kernel/traps.c
160
printk("%s RP(r2): " RFMT "\n", level, regs->gr[2]);
arch/parisc/kernel/traps.c
162
printk("%s IAOQ[0]: %pS\n", level, (void *) regs->iaoq[0]);
arch/parisc/kernel/traps.c
163
printk("%s IAOQ[1]: %pS\n", level, (void *) regs->iaoq[1]);
arch/parisc/kernel/traps.c
164
printk("%s RP(r2): %pS\n", level, (void *) regs->gr[2]);
arch/parisc/kernel/traps.c
175
printk(fmt, ##__VA_ARGS__); \
arch/parisc/kernel/traps.c
185
printk("%sBacktrace:\n", loglvl);
arch/parisc/kernel/traps.c
191
printk("%s [<" RFMT ">] %pS\n",
arch/parisc/kernel/traps.c
196
printk("%s\n", loglvl);
arch/parisc/kernel/traps.c
237
if (err) printk(KERN_CRIT
arch/parisc/kernel/traps.c
250
printk(KERN_CRIT "%s (pid %d): %s (code %ld)\n",
arch/parisc/kernel/traps.c
255
printk(KERN_CRIT "%s() recursion detected.\n", __func__);
arch/parisc/kernel/traps.c
337
printk(KERN_ERR "Trap %d on CPU %d\n", code, smp_processor_id());
arch/parisc/kernel/traps.c
454
printk("\n");
arch/parisc/kernel/traps.c
518
printk(KERN_CRIT "Interruption # %d\n", code);
arch/parisc/kernel/traps.c
535
printk(KERN_CRIT "Power failure interrupt !\n");
arch/parisc/kernel/traps.c
82
printk("%s%s%02d-%02d " fmt " " fmt " " fmt " " fmt "\n", \
arch/parisc/kernel/traps.c
91
printk("%s\n", level);
arch/parisc/kernel/traps.c
92
printk("%s YZrvWESTHLNXBCVMcbcbcbcbOGFRQPDI\n", level);
arch/parisc/kernel/traps.c
94
printk("%sPSW: %s %s\n", level, buf, print_tainted());
arch/parisc/kernel/unaligned.c
24
#define DPRINTF(fmt, args...) do { printk(KERN_DEBUG "%s:%d:%s ", __FILE__, __LINE__, __func__ ); printk(KERN_DEBUG fmt, ##args ); } while (0)
arch/parisc/kernel/unaligned.c
392
printk(KERN_WARNING "%s(%d): unaligned access to " RFMT
arch/parisc/kernel/unaligned.c
598
printk(KERN_CRIT "Not-handled unaligned insn 0x%08lx\n", regs->iir);
arch/parisc/kernel/unaligned.c
612
printk(KERN_CRIT "Unaligned handler failed, ret = %d\n", ret);
arch/parisc/kernel/unwind.c
203
printk("region 0x%x-0x%x\n",
arch/parisc/math-emu/decode_exc.c
339
printk("%s(%d) Unknown FPU exception 0x%x\n", __FILE__,
arch/parisc/math-emu/driver.c
82
printk(KERN_DEBUG "FP VZOUICxxxxCQCQCQCQCQCRMxxTDVZOUI ->\n ");
arch/parisc/math-emu/driver.c
84
printk(KERN_DEBUG "\n");
arch/parisc/math-emu/driver.c
92
printk(KERN_DEBUG "VZOUICxxxxCQCQCQCQCQCRMxxTDVZOUI decode_fpu returns %d|0x%x\n",
arch/parisc/math-emu/driver.c
95
printk(KERN_DEBUG "\n");
arch/parisc/math-emu/fpudispatch.c
204
if (FPUDEBUG) printk("class %d subop %d\n", class, subop);
arch/parisc/mm/fault.c
407
printk(KERN_ERR
arch/parisc/mm/init.c
153
printk("Large gap in memory detected (%ld pages). "
arch/parisc/mm/init.c
203
printk(KERN_WARNING "Memory truncated to %ld MB\n", mem_limit >> 20);
arch/parisc/mm/init.c
217
printk(KERN_INFO "Total Memory: %ld MB\n",mem_max >> 20);
arch/parisc/mm/init.c
302
printk(KERN_INFO "initrd: %08lx-%08lx\n", initrd_start, initrd_end);
arch/parisc/mm/init.c
312
printk(KERN_INFO "initrd: reserving %08lx-%08lx (mem_max %08lx)\n", __pa(initrd_start), __pa(initrd_start) + initrd_reserve, mem_max);
arch/parisc/mm/init.c
579
printk("virtual kernel memory layout:\n"
arch/parisc/mm/init.c
634
printk(KERN_INFO "initrd: mapping %08lx-%08lx\n", initrd_start, initrd_end);
arch/parisc/net/bpf_jit_comp32.c
1131
if (0) printk("CLASS %03d CODE %#02x ALU64:%d BPF_SIZE %#02x "
arch/powerpc/include/asm/cpu_has_feature.h
32
printk("Warning! cpu_has_feature() used prior to jump label init!\n");
arch/powerpc/include/asm/hardirq.h
32
printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
arch/powerpc/include/asm/mmu.h
247
printk("Warning! mmu_has_feature() used prior to jump label init!\n");
arch/powerpc/kernel/btext.c
228
printk("boot stdout isn't a display !\n");
arch/powerpc/kernel/btext.c
238
printk("trying %pOF ...\n", np);
arch/powerpc/kernel/btext.c
240
printk("result: %d\n", rc);
arch/powerpc/kernel/dbell.c
45
printk(KERN_WARNING "Received doorbell on non-smp system\n");
arch/powerpc/kernel/iommu.c
402
printk(KERN_INFO "iommu_free: invalid entry\n");
arch/powerpc/kernel/iommu.c
403
printk(KERN_INFO "\tentry = 0x%lx\n", entry);
arch/powerpc/kernel/iommu.c
404
printk(KERN_INFO "\tdma_addr = 0x%llx\n", (u64)dma_addr);
arch/powerpc/kernel/iommu.c
405
printk(KERN_INFO "\tTable = 0x%llx\n", (u64)tbl);
arch/powerpc/kernel/iommu.c
406
printk(KERN_INFO "\tbus# = 0x%llx\n", (u64)tbl->it_busno);
arch/powerpc/kernel/iommu.c
407
printk(KERN_INFO "\tsize = 0x%llx\n", (u64)tbl->it_size);
arch/powerpc/kernel/iommu.c
408
printk(KERN_INFO "\tstartOff = 0x%llx\n", (u64)tbl->it_offset);
arch/powerpc/kernel/iommu.c
409
printk(KERN_INFO "\tindex = 0x%llx\n", (u64)tbl->it_index);
arch/powerpc/kernel/iommu.c
678
printk(KERN_WARNING "TCE table is full; freeing ");
arch/powerpc/kernel/iommu.c
679
printk(KERN_WARNING "%d entries for the kdump boot\n",
arch/powerpc/kernel/kprobes.c
134
printk("Attempt to register kprobe at an unaligned address\n");
arch/powerpc/kernel/kprobes.c
137
printk("Cannot register a kprobe on instructions that can't be single stepped\n");
arch/powerpc/kernel/kprobes.c
141
printk("Cannot register a kprobe on the second word of prefixed instruction\n");
arch/powerpc/kernel/kprobes.c
152
printk("Cannot register a kprobe on the second word of prefixed instruction\n");
arch/powerpc/kernel/kprobes.c
249
printk("Can't step on instruction %08lx\n", ppc_inst_as_ulong(insn));
arch/powerpc/kernel/kvm.c
137
printk(KERN_ERR "KVM: No more space (%d + %d)\n",
arch/powerpc/kernel/kvm.c
700
printk(KERN_INFO "KVM: Live patching for a fast VM %s\n",
arch/powerpc/kernel/legacy_serial.c
123
printk(KERN_DEBUG "Moved legacy port %d -> %d\n",
arch/powerpc/kernel/legacy_serial.c
129
printk(KERN_DEBUG "Replacing legacy port %d\n", index);
arch/powerpc/kernel/legacy_serial.c
156
printk(KERN_DEBUG "Found legacy serial port %d for %pOF\n", index, np);
arch/powerpc/kernel/legacy_serial.c
157
printk(KERN_DEBUG " %s=%pa, taddr=%pa, irq=%lx, clk=%d, speed=%d\n",
arch/powerpc/kernel/legacy_serial.c
23
#define DBG(fmt...) do { printk(fmt); } while(0)
arch/powerpc/kernel/mce.c
575
printk("%sMCE: CPU%d: machine check (%s) %s %s %s %s[%s]\n",
arch/powerpc/kernel/mce.c
582
printk("%sMCE: CPU%d: PID: %d Comm: %s %sNIP: [%016llx]%s\n",
arch/powerpc/kernel/mce.c
586
printk("%sMCE: CPU%d: NIP: [%016llx] %pS%s\n",
arch/powerpc/kernel/mce.c
590
printk("%sMCE: CPU%d: Initiator %s\n", level, evt->cpu, initiator);
arch/powerpc/kernel/mce.c
594
printk("%sMCE: CPU%d: %s\n", level, evt->cpu, subtype);
arch/powerpc/kernel/nvram_64.c
1000
printk(KERN_ERR "nvram_scan_partitions: Failed kmalloc\n");
arch/powerpc/kernel/nvram_64.c
1008
printk(KERN_ERR "nvram_scan_partitions: Error parsing "
arch/powerpc/kernel/nvram_64.c
1022
printk(KERN_WARNING "WARNING: nvram partition checksum"
arch/powerpc/kernel/nvram_64.c
1025
printk(KERN_WARNING "Terminating nvram partition scan\n");
arch/powerpc/kernel/nvram_64.c
1029
printk(KERN_WARNING "WARNING: nvram corruption "
arch/powerpc/kernel/nvram_64.c
1036
printk(KERN_ERR "nvram_scan_partitions: kmalloc failed\n");
arch/powerpc/kernel/nvram_64.c
712
printk(KERN_WARNING "--------%s---------\n", label);
arch/powerpc/kernel/nvram_64.c
713
printk(KERN_WARNING "indx\t\tsig\tchks\tlen\tname\n");
arch/powerpc/kernel/nvram_64.c
715
printk(KERN_WARNING "%4d \t%02x\t%02x\t%d\t%12.12s\n",
arch/powerpc/kernel/nvram_64.c
801
printk(KERN_ERR "nvram_remove_partition: nvram_write failed (%d)\n", rc);
arch/powerpc/kernel/nvram_64.c
818
printk(KERN_ERR "nvram_remove_partition: nvram_write failed (%d)\n", rc);
arch/powerpc/kernel/paca.c
308
printk(KERN_DEBUG "Allocated %u bytes for %u pacas\n",
arch/powerpc/kernel/pci-common.c
1304
printk(KERN_WARNING "PCI: Cannot allocate resource region %d"
arch/powerpc/kernel/pci-common.c
1383
printk(KERN_DEBUG
arch/powerpc/kernel/pci-common.c
1411
printk(KERN_DEBUG
arch/powerpc/kernel/pci-common.c
1609
printk(KERN_ERR "Can't find hose for PCI bus %d!\n", busnr);
arch/powerpc/kernel/pci-common.c
678
printk(KERN_DEBUG
arch/powerpc/kernel/pci-common.c
762
printk(KERN_INFO "PCI host bridge %pOF %s ranges:\n",
arch/powerpc/kernel/pci-common.c
783
printk(KERN_INFO
arch/powerpc/kernel/pci-common.c
790
printk(KERN_INFO
arch/powerpc/kernel/pci-common.c
819
printk(KERN_INFO
arch/powerpc/kernel/pci-common.c
828
printk(KERN_INFO
arch/powerpc/kernel/pci-common.c
886
printk(KERN_ERR "No host bridge for PCI dev %s !\n",
arch/powerpc/kernel/pci_32.c
121
printk(KERN_ERR "Can't allocate OF bus map !\n");
arch/powerpc/kernel/pci_32.c
147
printk("PCI->OF bus map:\n");
arch/powerpc/kernel/pci_32.c
151
printk("%d -> %d\n", i, pci_to_OF_bus_map[i]);
arch/powerpc/kernel/pci_32.c
248
printk(KERN_INFO "PCI: Probing PCI hardware\n");
arch/powerpc/kernel/pci_32.c
83
printk(KERN_WARNING "Can't get bus-range for %pOF, "
arch/powerpc/kernel/pci_64.c
44
printk(KERN_INFO "PCI: Probing PCI hardware\n");
arch/powerpc/kernel/pci_64.c
71
printk(KERN_DEBUG "PCI: Probing PCI hardware done\n");
arch/powerpc/kernel/pci_of_scan.c
156
printk(KERN_ERR "PCI: bad cfg reg num 0x%x\n", i);
arch/powerpc/kernel/pci_of_scan.c
274
printk(KERN_DEBUG "Can't get bus-range for PCI-PCI bridge %pOF\n",
arch/powerpc/kernel/pci_of_scan.c
280
printk(KERN_DEBUG "Can't get ranges for PCI-PCI bridge %pOF\n",
arch/powerpc/kernel/pci_of_scan.c
291
printk(KERN_ERR "Failed to create pci bus for %pOF\n",
arch/powerpc/kernel/pci_of_scan.c
319
printk(KERN_ERR "PCI: ignoring extra I/O range"
arch/powerpc/kernel/pci_of_scan.c
325
printk(KERN_ERR "PCI: too many memory ranges"
arch/powerpc/kernel/pmc.c
48
printk(KERN_WARNING "reserve_pmc_hardware: "
arch/powerpc/kernel/process.c
1381
printk("Code: ");
arch/powerpc/kernel/process.c
1536
printk("NIP: "REG" LR: "REG" CTR: "REG"\n",
arch/powerpc/kernel/process.c
1538
printk("REGS: %px TRAP: %04lx %s (%s)\n",
arch/powerpc/kernel/process.c
1540
printk("MSR: "REG" ", regs->msr);
arch/powerpc/kernel/process.c
1574
printk("NIP ["REG"] %pS\n", regs->nip, (void *)regs->nip);
arch/powerpc/kernel/process.c
1575
printk("LR ["REG"] %pS\n", regs->link, (void *)regs->link);
arch/powerpc/kernel/process.c
2305
printk("%sCall Trace:\n", loglvl);
arch/powerpc/kernel/process.c
2314
printk("%s["REG"] ["REG"] %pS",
arch/powerpc/kernel/process.c
2340
printk("%s---- interrupt: %lx at %pS\n",
arch/powerpc/kernel/process.c
2347
printk("%s---- interrupt: %lx\n", loglvl, regs->trap);
arch/powerpc/kernel/process.c
70
#define TM_DEBUG(x...) printk(KERN_INFO x)
arch/powerpc/kernel/prom.c
64
#define DBG(fmt...) printk(KERN_ERR fmt)
arch/powerpc/kernel/prom.c
896
printk("Failed to identify boot CPU !\n");
arch/powerpc/kernel/rtas-proc.c
294
printk(KERN_WARNING "error: setting poweron time returned: %s\n",
arch/powerpc/kernel/rtas-proc.c
357
printk(KERN_WARNING "error: setting the clock returned: %s\n",
arch/powerpc/kernel/rtas-proc.c
368
printk(KERN_WARNING "error: reading the clock returned: %s\n",
arch/powerpc/kernel/rtas-proc.c
435
printk (KERN_ERR "error: could not get rtas-sensors\n");
arch/powerpc/kernel/rtas-proc.c
714
printk(KERN_WARNING "error: setting tone frequency returned: %s\n",
arch/powerpc/kernel/rtas-proc.c
742
printk(KERN_WARNING "error: setting tone volume returned: %s\n",
arch/powerpc/kernel/rtas_flash.c
189
printk(KERN_INFO "FLASH: flash image with %ld bytes stored for hardware flash on reboot\n", image_size);
arch/powerpc/kernel/rtas_flash.c
544
printk(KERN_ALERT "FLASH: firmware flash requires a reboot\n");
arch/powerpc/kernel/rtas_flash.c
545
printk(KERN_ALERT "FLASH: the firmware image will NOT be flashed\n");
arch/powerpc/kernel/rtas_flash.c
551
printk(KERN_ALERT "FLASH: ibm,update-flash-64-and-reboot "
arch/powerpc/kernel/rtas_flash.c
553
printk(KERN_ALERT "FLASH: firmware will not be flashed\n");
arch/powerpc/kernel/rtas_flash.c
574
printk(KERN_ALERT "FLASH: kernel bug...flash list header addr above 4GB\n");
arch/powerpc/kernel/rtas_flash.c
579
printk(KERN_ALERT "FLASH: preparing saved firmware image for flash\n");
arch/powerpc/kernel/rtas_flash.c
601
printk(KERN_ALERT "FLASH: flash image is %ld bytes\n", image_size);
arch/powerpc/kernel/rtas_flash.c
602
printk(KERN_ALERT "FLASH: performing flash and reboot\n");
arch/powerpc/kernel/rtas_flash.c
605
printk(KERN_ALERT "FLASH: this will take several minutes. Do not power off!\n");
arch/powerpc/kernel/rtas_flash.c
609
printk(KERN_ALERT "FLASH: success\n");
arch/powerpc/kernel/rtas_flash.c
612
printk(KERN_ALERT "FLASH: hardware error. Firmware may not be not flashed\n");
arch/powerpc/kernel/rtas_flash.c
615
printk(KERN_ALERT "FLASH: image is corrupt or not correct for this platform. Firmware not flashed\n");
arch/powerpc/kernel/rtas_flash.c
618
printk(KERN_ALERT "FLASH: flash failed when partially complete. System may not reboot\n");
arch/powerpc/kernel/rtas_flash.c
621
printk(KERN_ALERT "FLASH: unknown flash return code %d\n", status);
arch/powerpc/kernel/rtas_flash.c
692
printk(KERN_ERR "%s: failed to create block cache\n",
arch/powerpc/kernel/rtas_pci.c
162
printk(KERN_ERR "Can't get address for Python workarounds !\n");
arch/powerpc/kernel/rtas_pci.c
178
printk(KERN_INFO "Python workaround: ");
arch/powerpc/kernel/rtas_pci.c
186
printk("reg0: %x\n", val);
arch/powerpc/kernel/rtasd.c
121
printk(RTAS_DEBUG "%d -------- %s begin --------\n",
arch/powerpc/kernel/rtasd.c
143
printk(KERN_DEBUG "%s\n", buffer);
arch/powerpc/kernel/rtasd.c
146
printk(KERN_DEBUG "%s\n", buffer);
arch/powerpc/kernel/rtasd.c
148
printk(RTAS_DEBUG "%d -------- %s end ----------\n",
arch/powerpc/kernel/rtasd.c
153
printk(RTAS_DEBUG "event: %d, Type: %s (%d), Severity: %d\n",
arch/powerpc/kernel/rtasd.c
386
printk(KERN_DEBUG "rtasd: surveillance not supported\n");
arch/powerpc/kernel/rtasd.c
390
printk(KERN_ERR "rtasd: could not update surveillance\n");
arch/powerpc/kernel/rtasd.c
403
printk(KERN_ERR "event-scan failed\n");
arch/powerpc/kernel/rtasd.c
485
printk(KERN_DEBUG "RTAS daemon started\n");
arch/powerpc/kernel/rtasd.c
513
printk(KERN_INFO "rtasd: No event-scan on system\n");
arch/powerpc/kernel/rtasd.c
519
printk(KERN_ERR "rtasd: no rtas-event-scan-rate on system\n");
arch/powerpc/kernel/rtasd.c
525
printk(KERN_DEBUG "rtasd: scan rate is 0, not scanning\n");
arch/powerpc/kernel/rtasd.c
536
printk(KERN_ERR "rtasd: no memory\n");
arch/powerpc/kernel/rtasd.c
559
printk(KERN_ERR "Failed to create error_log proc entry\n");
arch/powerpc/kernel/setup-common.c
406
printk(KERN_INFO "CPU maps initialized for %d thread%s per core\n",
arch/powerpc/kernel/setup-common.c
408
printk(KERN_DEBUG " (thread shift is %d)\n", threads_shift);
arch/powerpc/kernel/setup-common.c
545
printk(KERN_WARNING
arch/powerpc/kernel/setup-common.c
551
printk(KERN_INFO "Partition configured for %d cpus.\n",
arch/powerpc/kernel/setup-common.c
630
printk(KERN_ERR "Entry %d in ppc_md non empty before"
arch/powerpc/kernel/setup-common.c
837
printk(KERN_ERR
arch/powerpc/kernel/setup_32.c
107
printk(KERN_INFO "l2cr set to %lx\n", val);
arch/powerpc/kernel/setup_32.c
120
printk(KERN_INFO "l3cr set to %lx\n", val);
arch/powerpc/kernel/smp.c
1241
printk(KERN_ERR "CPU%d didn't die...\n", cpu);
arch/powerpc/kernel/smp.c
1362
printk(KERN_ERR "Processor %u is stuck.\n", cpu);
arch/powerpc/kernel/tau_6xx.c
138
printk(KERN_ERR "temp.c: line %d, logic error\n", __LINE__);
arch/powerpc/kernel/tau_6xx.c
195
printk("Thermal assist unit not available\n");
arch/powerpc/kernel/time.c
1000
printk(KERN_DEBUG "time_init: decrementer frequency = %lu.%.6lu MHz\n",
arch/powerpc/kernel/time.c
1002
printk(KERN_DEBUG "time_init: processor frequency = %lu.%.6lu MHz\n",
arch/powerpc/kernel/time.c
771
printk(KERN_ERR "WARNING: Estimating decrementer frequency "
arch/powerpc/kernel/time.c
780
printk(KERN_ERR "WARNING: Estimating processor frequency "
arch/powerpc/kernel/time.c
847
printk(KERN_ERR "clocksource: %s is already registered\n",
arch/powerpc/kernel/time.c
852
printk(KERN_INFO "clocksource: %s mult[%x] shift[%d] registered\n",
arch/powerpc/kernel/traps.c
1093
printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
arch/powerpc/kernel/traps.c
1101
printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
arch/powerpc/kernel/traps.c
1109
printk("Bad trap at PC: %lx, SR: %lx, vector=%lx\n",
arch/powerpc/kernel/traps.c
1545
printk(KERN_EMERG "Unexpected TM Bad Thing exception "
arch/powerpc/kernel/traps.c
1690
printk(KERN_EMERG "Unrecoverable FP Unavailable Exception "
arch/powerpc/kernel/traps.c
1704
printk(KERN_EMERG "Unrecoverable VMX/Altivec Unavailable Exception "
arch/powerpc/kernel/traps.c
1718
printk(KERN_EMERG "Unrecoverable VSX Unavailable Exception "
arch/powerpc/kernel/traps.c
2104
printk(KERN_EMERG "VMX/Altivec assist exception in kernel mode"
arch/powerpc/kernel/traps.c
214
printk("\n");
arch/powerpc/kernel/traps.c
2188
printk(KERN_ERR "unrecognized spe instruction "
arch/powerpc/kernel/traps.c
2221
printk(KERN_ERR "unrecognized spe instruction "
arch/powerpc/kernel/traps.c
2249
printk (KERN_EMERG "PowerPC Book-E Watchdog Exception\n");
arch/powerpc/kernel/traps.c
2261
printk(KERN_EMERG "Bad kernel stack pointer %lx at %lx\n",
arch/powerpc/kernel/traps.c
264
printk("Oops: %s, sig: %ld [#%d]\n", str, err, ++die_counter);
arch/powerpc/kernel/traps.c
266
printk("%s PAGE_SIZE=%luK%s %s%s%s%s %s\n",
arch/powerpc/kernel/traps.c
557
printk(KERN_DEBUG "%s bad port %lx at %p\n",
arch/powerpc/kernel/traps.c
617
printk("Machine check in kernel mode.\n");
arch/powerpc/kernel/traps.c
618
printk("Caused by (from MCSR=%lx): ", reason);
arch/powerpc/kernel/traps.c
722
printk("Machine check in kernel mode.\n");
arch/powerpc/kernel/traps.c
723
printk("Caused by (from MCSR=%lx): ", reason);
arch/powerpc/kernel/traps.c
762
printk("Machine check in kernel mode.\n");
arch/powerpc/kernel/traps.c
763
printk("Caused by (from SRR1=%lx): ", reason);
arch/powerpc/kernel/traps.c
93
#define TM_DEBUG(x...) printk(KERN_INFO x)
arch/powerpc/kernel/udbg.c
162
printk(KERN_INFO "early console immortal !\n");
arch/powerpc/kernel/udbg.c
88
printk("%s", s);
arch/powerpc/kexec/core.c
72
printk("Crash kernel location must be 0x%x\n",
arch/powerpc/kexec/core_32.c
57
printk(KERN_INFO "Bye!\n");
arch/powerpc/kexec/core_64.c
195
printk(KERN_INFO "kexec: waiting for cpu %d "
arch/powerpc/kexec/core_64.c
240
printk(KERN_INFO "kexec: Waking offline cpu %d.\n",
arch/powerpc/kexec/core_64.c
348
printk("kexec: Starting switchover sequence.\n");
arch/powerpc/kexec/core_64.c
370
printk("kexec: Unshared all shared pages.\n");
arch/powerpc/kexec/crash.c
123
printk(KERN_EMERG "Sending IPI to other CPUs\n");
arch/powerpc/kexec/crash.c
152
printk(KERN_EMERG "IPI complete\n");
arch/powerpc/kexec/crash.c
156
printk(KERN_EMERG "ERROR: %d cpu(s) not responding\n",
arch/powerpc/kexec/crash.c
177
printk(KERN_EMERG "Activate system reset (dumprestart) "
arch/powerpc/kexec/crash.c
315
printk(KERN_ERR "Crash shutdown handles full, "
arch/powerpc/kexec/crash.c
335
printk(KERN_ERR "Crash shutdown handle not found\n");
arch/powerpc/kvm/book3s.c
186
printk(KERN_INFO "Queueing interrupt %x\n", vec);
arch/powerpc/kvm/book3s.c
359
printk(KERN_ERR "KVM: Unknown interrupt: 0x%x\n", priority);
arch/powerpc/kvm/book3s.c
402
printk(KERN_EMERG "KVM: Check pending: %lx\n", vcpu->arch.pending_exceptions);
arch/powerpc/kvm/book3s_32_mmu.c
167
printk(KERN_INFO "BAT is not readable!\n");
arch/powerpc/kvm/book3s_32_mmu.c
203
printk(KERN_INFO "KVM: Invalid PTEG!\n");
arch/powerpc/kvm/book3s_32_mmu.c
23
#define dprintk(X...) printk(KERN_INFO X)
arch/powerpc/kvm/book3s_32_mmu.c
29
#define dprintk_pte(X...) printk(KERN_INFO X)
arch/powerpc/kvm/book3s_32_mmu_host.c
149
printk(KERN_INFO "Couldn't get guest page for gpa %lx!\n",
arch/powerpc/kvm/book3s_32_mmu_host.c
23
#define dprintk_mmu(a, ...) printk(KERN_INFO a, __VA_ARGS__)
arch/powerpc/kvm/book3s_32_mmu_host.c
29
#define dprintk_sr(a, ...) printk(KERN_INFO a, __VA_ARGS__)
arch/powerpc/kvm/book3s_64_mmu.c
22
#define dprintk(X...) printk(KERN_INFO X)
arch/powerpc/kvm/book3s_64_mmu_host.c
100
printk(KERN_INFO "Couldn't get guest page for gpa %lx!\n",
arch/powerpc/kvm/book3s_64_mmu_host.c
116
printk(KERN_ERR "KVM: Segment map for 0x%llx (0x%lx) failed\n",
arch/powerpc/kvm/book3s_64_mmu_hv.c
39
printk(KERN_DEBUG "RESIZE HPT %p: ", resize); \
arch/powerpc/kvm/book3s_64_mmu_hv.c
40
printk(__VA_ARGS__); \
arch/powerpc/kvm/book3s_emulate.c
1066
printk(KERN_INFO "KVM: Unaligned instruction 0x%x\n", inst);
arch/powerpc/kvm/book3s_hv.c
1646
printk(KERN_EMERG "KVM trap in HV mode!\n");
arch/powerpc/kvm/book3s_hv.c
1647
printk(KERN_EMERG "trap=0x%x | pc=0x%lx | msr=0x%llx\n",
arch/powerpc/kvm/book3s_hv.c
1957
printk(KERN_EMERG "trap=0x%x | pc=0x%lx | msr=0x%llx\n",
arch/powerpc/kvm/book3s_paired_singles.c
22
#define dprintk printk
arch/powerpc/kvm/book3s_pr.c
1420
printk(KERN_EMERG "exit_nr=0x%x | pc=0x%lx | msr=0x%lx\n",
arch/powerpc/kvm/book3s_pr.c
475
printk(KERN_INFO "KVM: Set MSR to 0x%llx\n", msr);
arch/powerpc/kvm/book3s_pr.c
813
printk(KERN_INFO "Giving up ext 0x%lx\n", msr);
arch/powerpc/kvm/book3s_pr.c
896
printk(KERN_INFO "Loading up ext 0x%lx\n", msr);
arch/powerpc/kvm/booke.c
101
printk("exceptions: %08lx\n", vcpu->arch.pending_exceptions);
arch/powerpc/kvm/booke.c
104
printk("gpr%02d: %08lx %08lx %08lx %08lx\n", i,
arch/powerpc/kvm/booke.c
1081
printk("MACHINE CHECK: %lx\n", mfspr(SPRN_MCSR));
arch/powerpc/kvm/booke.c
1211
printk(KERN_CRIT "%s: unexpected SPE interrupt %u at %08lx\n",
arch/powerpc/kvm/booke.c
1392
printk(KERN_EMERG "exit_nr %d\n", exit_nr);
arch/powerpc/kvm/booke.c
847
printk(KERN_CRIT "%s: emulation at %lx failed (%08lx)\n",
arch/powerpc/kvm/booke.c
94
printk("pc: %08lx msr: %08llx\n", vcpu->arch.regs.nip,
arch/powerpc/kvm/booke.c
96
printk("lr: %08lx ctr: %08lx\n", vcpu->arch.regs.link,
arch/powerpc/kvm/booke.c
98
printk("srr0: %08llx srr1: %08llx\n", vcpu->arch.shared->srr0,
arch/powerpc/kvm/emulate.c
118
printk(KERN_INFO "mtspr: unknown spr "
arch/powerpc/kvm/emulate.c
179
printk(KERN_INFO "mfspr: unknown spr "
arch/powerpc/kvm/emulate.c
296
printk(KERN_ERR "Couldn't emulate instruction 0x%08x "
arch/powerpc/kvm/timing.c
56
printk(KERN_ERR"%s - wrap adding sum of durations"
arch/powerpc/kvm/timing.c
66
printk(KERN_ERR"%s - wrap adding sum of squared durations"
arch/powerpc/lib/feature-fixups.c
1000
printk(KERN_DEBUG "Running feature fixup self-tests ...\n");
arch/powerpc/lib/feature-fixups.c
119
printk("Unable to patch feature section at %p - %p" \
arch/powerpc/lib/feature-fixups.c
218
printk(KERN_DEBUG "stf-barrier: patched %d entry locations (%s barrier)\n", i,
arch/powerpc/lib/feature-fixups.c
264
printk(KERN_DEBUG "stf-barrier: patched %d exit locations (%s barrier)\n", i,
arch/powerpc/lib/feature-fixups.c
348
printk(KERN_DEBUG "uaccess-flush: patched %d locations (%s flush)\n", i,
arch/powerpc/lib/feature-fixups.c
419
printk(KERN_DEBUG "entry-flush: patched %d locations (%s flush)\n", i,
arch/powerpc/lib/feature-fixups.c
471
printk(KERN_DEBUG "rfi-flush: patched %d locations (%s flush)\n", i,
arch/powerpc/lib/feature-fixups.c
527
printk(KERN_DEBUG "barrier-nospec: patched %d locations\n", i);
arch/powerpc/lib/feature-fixups.c
565
printk(KERN_DEBUG "barrier-nospec: patched %d locations\n", i);
arch/powerpc/lib/feature-fixups.c
710
if (!(x)) printk("feature-fixups: test failed at line %d\n", __LINE__);
arch/powerpc/lib/rheap.c
128
printk(KERN_ERR "rh: out of slots; crash is imminent.\n");
arch/powerpc/lib/rheap.c
712
printk(KERN_INFO
arch/powerpc/lib/rheap.c
716
printk(KERN_INFO " Free:\n");
arch/powerpc/lib/rheap.c
721
printk(KERN_INFO
arch/powerpc/lib/rheap.c
725
printk(KERN_INFO "\n");
arch/powerpc/lib/rheap.c
727
printk(KERN_INFO " Taken:\n");
arch/powerpc/lib/rheap.c
732
printk(KERN_INFO
arch/powerpc/lib/rheap.c
736
printk(KERN_INFO "\n");
arch/powerpc/lib/rheap.c
742
printk(KERN_INFO
arch/powerpc/lib/test_emulate_step.c
1735
printk(KERN_INFO "Running instruction emulation self-tests ...\n");
arch/powerpc/math-emu/fabs.c
13
printk("%s: D %p, B %p: ", __func__, frD, frB);
arch/powerpc/math-emu/fabs.c
15
printk("\n");
arch/powerpc/math-emu/fadd.c
19
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
arch/powerpc/math-emu/fadd.c
26
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fadd.c
27
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fadd.c
33
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fadds.c
20
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
arch/powerpc/math-emu/fadds.c
27
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fadds.c
28
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fadds.c
34
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fcmpo.c
20
printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
arch/powerpc/math-emu/fcmpo.c
27
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fcmpo.c
28
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fcmpo.c
44
printk("CR: %08x\n", *ccr);
arch/powerpc/math-emu/fcmpu.c
20
printk("%s: %p (%08x) %d %p %p\n", __func__, ccr, *ccr, crfD, frA, frB);
arch/powerpc/math-emu/fcmpu.c
27
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fcmpu.c
28
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fcmpu.c
41
printk("CR: %08x\n", *ccr);
arch/powerpc/math-emu/fctiw.c
22
printk("%s: D %p, B %p: ", __func__, frD, frB);
arch/powerpc/math-emu/fctiw.c
24
printk("\n");
arch/powerpc/math-emu/fctiwz.c
29
printk("%s: D %p, B %p: ", __func__, frD, frB);
arch/powerpc/math-emu/fctiwz.c
31
printk("\n");
arch/powerpc/math-emu/fdiv.c
19
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
arch/powerpc/math-emu/fdiv.c
26
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fdiv.c
27
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fdiv.c
33
printk("%s: FPSCR_VXZDZ raised\n", __func__);
arch/powerpc/math-emu/fdiv.c
39
printk("%s: FPSCR_VXIDI raised\n", __func__);
arch/powerpc/math-emu/fdiv.c
51
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fdivs.c
20
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
arch/powerpc/math-emu/fdivs.c
27
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fdivs.c
28
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fdivs.c
34
printk("%s: FPSCR_VXZDZ raised\n", __func__);
arch/powerpc/math-emu/fdivs.c
40
printk("%s: FPSCR_VXIDI raised\n", __func__);
arch/powerpc/math-emu/fdivs.c
53
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fmadd.c
21
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
arch/powerpc/math-emu/fmadd.c
29
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fmadd.c
30
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fmadd.c
31
printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
arch/powerpc/math-emu/fmadd.c
46
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fmadds.c
22
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
arch/powerpc/math-emu/fmadds.c
30
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fmadds.c
31
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fmadds.c
32
printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
arch/powerpc/math-emu/fmadds.c
47
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fmr.c
13
printk("%s: D %p, B %p: ", __func__, frD, frB);
arch/powerpc/math-emu/fmr.c
15
printk("\n");
arch/powerpc/math-emu/fmsub.c
21
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
arch/powerpc/math-emu/fmsub.c
29
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fmsub.c
30
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fmsub.c
31
printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
arch/powerpc/math-emu/fmsub.c
49
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fmsubs.c
22
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
arch/powerpc/math-emu/fmsubs.c
30
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fmsubs.c
31
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fmsubs.c
32
printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
arch/powerpc/math-emu/fmsubs.c
50
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fmul.c
19
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
arch/powerpc/math-emu/fmul.c
26
printk("A: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
arch/powerpc/math-emu/fmul.c
28
printk("B: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
arch/powerpc/math-emu/fmul.c
39
printk("D: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
arch/powerpc/math-emu/fmuls.c
20
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
arch/powerpc/math-emu/fmuls.c
27
printk("A: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
arch/powerpc/math-emu/fmuls.c
29
printk("B: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
arch/powerpc/math-emu/fmuls.c
40
printk("D: %ld %lu %lu %ld (%ld) [%08lx.%08lx %lx]\n",
arch/powerpc/math-emu/fnabs.c
13
printk("%s: D %p, B %p: ", __func__, frD, frB);
arch/powerpc/math-emu/fnabs.c
15
printk("\n");
arch/powerpc/math-emu/fneg.c
13
printk("%s: D %p, B %p: ", __func__, frD, frB);
arch/powerpc/math-emu/fneg.c
15
printk("\n");
arch/powerpc/math-emu/fnmadd.c
21
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
arch/powerpc/math-emu/fnmadd.c
29
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fnmadd.c
30
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fnmadd.c
31
printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
arch/powerpc/math-emu/fnmadd.c
49
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fnmadds.c
22
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
arch/powerpc/math-emu/fnmadds.c
30
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fnmadds.c
31
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fnmadds.c
32
printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
arch/powerpc/math-emu/fnmadds.c
50
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fnmsub.c
21
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
arch/powerpc/math-emu/fnmsub.c
29
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fnmsub.c
30
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fnmsub.c
31
printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
arch/powerpc/math-emu/fnmsub.c
52
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fnmsubs.c
22
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
arch/powerpc/math-emu/fnmsubs.c
30
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fnmsubs.c
31
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fnmsubs.c
32
printk("C: %ld %lu %lu %ld (%ld)\n", C_s, C_f1, C_f0, C_e, C_c);
arch/powerpc/math-emu/fnmsubs.c
53
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fre.c
9
printk("%s: %p %p\n", __func__, frD, frB);
arch/powerpc/math-emu/fres.c
10
printk("%s: %p %p\n", __func__, frD, frB);
arch/powerpc/math-emu/frsp.c
18
printk("%s: D %p, B %p\n", __func__, frD, frB);
arch/powerpc/math-emu/frsp.c
24
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/frsqrte.c
10
printk("%s: %p %p\n", __func__, frD, frB);
arch/powerpc/math-emu/frsqrtes.c
9
printk("%s: %p %p\n", __func__, frD, frB);
arch/powerpc/math-emu/fsel.c
17
printk("%s: %p %p %p %p\n", __func__, frD, frA, frB, frC);
arch/powerpc/math-emu/fsel.c
23
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fsel.c
24
printk("B: %08x %08x\n", frB[0], frB[1]);
arch/powerpc/math-emu/fsel.c
25
printk("C: %08x %08x\n", frC[0], frC[1]);
arch/powerpc/math-emu/fsel.c
37
printk("D: %08x.%08x\n", frD[0], frD[1]);
arch/powerpc/math-emu/fsqrt.c
18
printk("%s: %p %p %p %p\n", __func__, frD, frB);
arch/powerpc/math-emu/fsqrt.c
24
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fsqrt.c
35
printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fsqrts.c
19
printk("%s: %p %p %p %p\n", __func__, frD, frB);
arch/powerpc/math-emu/fsqrts.c
25
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fsqrts.c
36
printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fsub.c
19
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
arch/powerpc/math-emu/fsub.c
26
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fsub.c
27
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fsub.c
39
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/fsubs.c
20
printk("%s: %p %p %p\n", __func__, frD, frA, frB);
arch/powerpc/math-emu/fsubs.c
27
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/fsubs.c
28
printk("B: %ld %lu %lu %ld (%ld)\n", B_s, B_f1, B_f0, B_e, B_c);
arch/powerpc/math-emu/fsubs.c
40
printk("D: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/lfd.c
15
printk("%s: D %p, ea %p: ", __func__, frD, ea);
arch/powerpc/math-emu/lfd.c
17
printk("\n");
arch/powerpc/math-emu/lfs.c
20
printk("%s: D %p, ea %p\n", __func__, frD, ea);
arch/powerpc/math-emu/lfs.c
29
printk("A: %ld %lu %ld (%ld) [%08lx]\n", A_s, A_f, A_e, A_c,
arch/powerpc/math-emu/lfs.c
36
printk("R: %ld %lu %lu %ld (%ld)\n", R_s, R_f1, R_f0, R_e, R_c);
arch/powerpc/math-emu/math_efp.c
722
printk(KERN_ERR "\nOoops! IEEE-754 compliance handler encountered un-supported instruction.\ninst code: %08lx\n", speinsn);
arch/powerpc/math-emu/mcrfs.c
15
printk("%s: %p (%08x) %d %d\n", __func__, ccr, *ccr, crfD, crfS);
arch/powerpc/math-emu/mcrfs.c
29
printk("CR: %08x\n", __func__, *ccr);
arch/powerpc/math-emu/mffs.c
15
printk("%s: frD %p: %08x.%08x\n", __func__, frD, frD[0], frD[1]);
arch/powerpc/math-emu/mtfsb0.c
16
printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR);
arch/powerpc/math-emu/mtfsb1.c
16
printk("%s: %d %08lx\n", __func__, crbD, __FPU_FPSCR);
arch/powerpc/math-emu/mtfsf.c
48
printk("%s: %02x %p: %08lx\n", __func__, FM, frB, __FPU_FPSCR);
arch/powerpc/math-emu/mtfsfi.c
21
printk("%s: %d %x: %08lx\n", __func__, crfD, IMM, __FPU_FPSCR);
arch/powerpc/math-emu/stfd.c
11
printk("%s: S %p, ea %p: ", __func__, frS, ea);
arch/powerpc/math-emu/stfd.c
13
printk("\n");
arch/powerpc/math-emu/stfiwx.c
10
printk("%s: %p %p\n", __func__, frS, ea);
arch/powerpc/math-emu/stfs.c
20
printk("%s: S %p, ea %p\n", __func__, frS, ea);
arch/powerpc/math-emu/stfs.c
26
printk("A: %ld %lu %lu %ld (%ld)\n", A_s, A_f1, A_f0, A_e, A_c);
arch/powerpc/math-emu/stfs.c
32
printk("R: %ld %lu %ld (%ld)\n", R_s, R_f, R_e, R_c);
arch/powerpc/mm/book3s64/hash_pgtable.c
179
printk(KERN_ERR "Failed to do bolted mapping IO "
arch/powerpc/mm/fault.c
648
printk(KERN_ALERT "Faulting instruction address: 0x%08lx\n",
arch/powerpc/mm/fault.c
652
printk(KERN_ALERT "Thread overran stack, or stack corrupted\n");
arch/powerpc/mm/mem.c
252
printk(KERN_DEBUG "Top of RAM: 0x%llx, Total RAM: 0x%llx\n",
arch/powerpc/mm/mem.c
254
printk(KERN_DEBUG "Memory hole size: %ldMB\n",
arch/powerpc/mm/nohash/44x.c
190
printk(KERN_DEBUG "bolted entries: ");
arch/powerpc/mm/nohash/44x.c
193
printk("%d ", i);
arch/powerpc/mm/nohash/44x.c
195
printk("\n");
arch/powerpc/mm/nohash/mmu_context.c
390
printk(KERN_INFO
arch/powerpc/perf/core-book3s.c
1481
printk(KERN_ERR "oops compute_mmcr failed\n");
arch/powerpc/perf/core-book3s.c
844
printk(KERN_ERR "oops trying to read PMC%d\n", idx);
arch/powerpc/perf/core-book3s.c
883
printk(KERN_ERR "oops trying to write PMC%d\n", idx);
arch/powerpc/perf/core-fsl-emb.c
125
printk(KERN_ERR "oops trying to write PMLCA%d\n", idx);
arch/powerpc/perf/core-fsl-emb.c
156
printk(KERN_ERR "oops trying to write PMLCB%d\n", idx);
arch/powerpc/perf/core-fsl-emb.c
63
printk(KERN_ERR "oops trying to read PMC%d\n", idx);
arch/powerpc/perf/core-fsl-emb.c
94
printk(KERN_ERR "oops trying to write PMC%d\n", idx);
arch/powerpc/platforms/44x/canyonlands.c
58
printk(KERN_ERR "failed did not find amcc, ppc460ex bcsr node\n");
arch/powerpc/platforms/44x/canyonlands.c
66
printk(KERN_CRIT "Could not remap bcsr\n");
arch/powerpc/platforms/44x/canyonlands.c
73
printk(KERN_ERR "failed did not find ibm,ppc4xx-gpio node\n");
arch/powerpc/platforms/44x/canyonlands.c
81
printk(KERN_CRIT "Could not get gpio node address\n");
arch/powerpc/platforms/44x/cpm.c
176
printk(KERN_WARNING
arch/powerpc/platforms/44x/cpm.c
267
printk(KERN_ERR "cpm: could not parse dcr property for %pOF\n",
arch/powerpc/platforms/44x/cpm.c
276
printk(KERN_ERR "cpm: failed to map dcr property for %pOF\n",
arch/powerpc/platforms/44x/machine_check.c
17
printk("Instruction");
arch/powerpc/platforms/44x/machine_check.c
20
printk("Data");
arch/powerpc/platforms/44x/machine_check.c
22
printk(" machine check in kernel mode.\n");
arch/powerpc/platforms/44x/machine_check.c
31
printk("Machine check in kernel mode.\n");
arch/powerpc/platforms/44x/machine_check.c
33
printk("Instruction Synchronous Machine Check exception\n");
arch/powerpc/platforms/44x/machine_check.c
39
printk("Instruction Read PLB Error\n");
arch/powerpc/platforms/44x/machine_check.c
41
printk("Data Read PLB Error\n");
arch/powerpc/platforms/44x/machine_check.c
43
printk("Data Write PLB Error\n");
arch/powerpc/platforms/44x/machine_check.c
45
printk("TLB Parity Error\n");
arch/powerpc/platforms/44x/machine_check.c
48
printk("I-Cache Parity Error\n");
arch/powerpc/platforms/44x/machine_check.c
51
printk("D-Cache Search Parity Error\n");
arch/powerpc/platforms/44x/machine_check.c
53
printk("D-Cache Flush Parity Error\n");
arch/powerpc/platforms/44x/machine_check.c
55
printk("Machine Check exception is imprecise\n");
arch/powerpc/platforms/44x/machine_check.c
69
printk(KERN_ERR "Machine check in kernel mode.\n");
arch/powerpc/platforms/44x/machine_check.c
71
printk(KERN_ERR "Instruction Synchronous Machine Check exception\n");
arch/powerpc/platforms/44x/machine_check.c
77
printk(KERN_ERR "Instruction Read PLB Error\n");
arch/powerpc/platforms/44x/machine_check.c
79
printk(KERN_ERR "Data Read PLB Error\n");
arch/powerpc/platforms/44x/machine_check.c
81
printk(KERN_ERR "Data Write PLB Error\n");
arch/powerpc/platforms/44x/machine_check.c
83
printk(KERN_ERR "TLB Parity Error\n");
arch/powerpc/platforms/44x/machine_check.c
86
printk(KERN_ERR "I-Cache Parity Error\n");
arch/powerpc/platforms/44x/machine_check.c
89
printk(KERN_ERR "D-Cache Search Parity Error\n");
arch/powerpc/platforms/44x/machine_check.c
91
printk(KERN_ERR "GPR Parity Error\n");
arch/powerpc/platforms/44x/machine_check.c
93
printk(KERN_ERR "FPR Parity Error\n");
arch/powerpc/platforms/44x/machine_check.c
95
printk(KERN_ERR "Machine Check exception is imprecise\n");
arch/powerpc/platforms/44x/pci.c
1092
printk(KERN_WARNING "%s: PCIE: Can't reset PHY\n", __func__);
arch/powerpc/platforms/44x/pci.c
1190
printk(KERN_INFO "PCI: PCIE bifurcation setup successfully.\n");
arch/powerpc/platforms/44x/pci.c
1191
printk(KERN_INFO "PCI: Total 3 PCIE ports are present\n");
arch/powerpc/platforms/44x/pci.c
1195
printk(KERN_INFO "PCI: Total 2 PCIE ports are present\n");
arch/powerpc/platforms/44x/pci.c
1236
printk(KERN_ERR "%pOF: Can't map internal config space !",
arch/powerpc/platforms/44x/pci.c
126
printk(KERN_WARNING "%pOF: Ignored unsupported dma range"
arch/powerpc/platforms/44x/pci.c
1274
printk(KERN_INFO "PCIE%d: Checking link...\n", port->index);
arch/powerpc/platforms/44x/pci.c
1277
printk(KERN_WARNING "PCIE%d: failed to get cfg space\n",
arch/powerpc/platforms/44x/pci.c
1291
printk(KERN_INFO "PCIE%d: link is up !\n", port->index);
arch/powerpc/platforms/44x/pci.c
1294
printk(KERN_WARNING "PCIE%d: Link up failed\n", port->index);
arch/powerpc/platforms/44x/pci.c
1335
printk(KERN_WARNING "PCIE: unknown host type %pOF\n", np);
arch/powerpc/platforms/44x/pci.c
1347
printk(KERN_WARNING "PCIE: failed to allocate ports array\n");
arch/powerpc/platforms/44x/pci.c
1420
printk(KERN_INFO "PCIE%d: PLL not locked\n",
arch/powerpc/platforms/44x/pci.c
1427
printk(KERN_INFO "PCIE%d: VC0 not active\n",
arch/powerpc/platforms/44x/pci.c
1453
printk(KERN_WARNING "Warning! Probing bus %u"
arch/powerpc/platforms/44x/pci.c
151
printk(KERN_ERR "%pOF: dma-ranges(s) mismatch\n", hose->dn);
arch/powerpc/platforms/44x/pci.c
159
printk(KERN_ERR "%pOF: dma-ranges too small "
arch/powerpc/platforms/44x/pci.c
1615
printk(KERN_WARNING "%pOF: Resource out of range\n", hose->dn);
arch/powerpc/platforms/44x/pci.c
168
printk(KERN_ERR "%pOF: dma-ranges unaligned\n", hose->dn);
arch/powerpc/platforms/44x/pci.c
1691
printk(KERN_WARNING "%pOF: Too many ranges\n",
arch/powerpc/platforms/44x/pci.c
1718
printk(KERN_INFO "%pOF: Legacy ISA memory support enabled\n",
arch/powerpc/platforms/44x/pci.c
178
printk(KERN_ERR "%pOF: dma-ranges outside of 32 bits space\n",
arch/powerpc/platforms/44x/pci.c
1853
printk(KERN_ERR "%pOF: Can't map external config space !",
arch/powerpc/platforms/44x/pci.c
1865
printk(KERN_ERR "%pOF: Can't map internal config space !",
arch/powerpc/platforms/44x/pci.c
188
printk(KERN_INFO "4xx PCI DMA offset set to 0x%08lx\n",
arch/powerpc/platforms/44x/pci.c
190
printk(KERN_INFO "4xx PCI DMA window base to 0x%016llx\n",
arch/powerpc/platforms/44x/pci.c
192
printk(KERN_INFO "DMA window size 0x%016llx\n",
arch/powerpc/platforms/44x/pci.c
1946
printk(KERN_INFO "PCIE%d: successfully set as root-complex\n",
arch/powerpc/platforms/44x/pci.c
1952
printk(KERN_INFO "PCIE%d: successfully set as endpoint\n",
arch/powerpc/platforms/44x/pci.c
1982
printk(KERN_ERR "PCIE: Can't find port number for %pOF\n", np);
arch/powerpc/platforms/44x/pci.c
1987
printk(KERN_ERR "PCIE: port number out of range for %pOF\n",
arch/powerpc/platforms/44x/pci.c
1998
printk(KERN_INFO "PCIE%d: Port disabled via device-tree\n", port->index);
arch/powerpc/platforms/44x/pci.c
2006
printk(KERN_ERR "PCIE: missing sdr-base for %pOF\n",
arch/powerpc/platforms/44x/pci.c
2022
printk(KERN_ERR "PCIE: missing or incorrect device_type for %pOF\n",
arch/powerpc/platforms/44x/pci.c
2029
printk(KERN_ERR "%pOF: Can't get PCI-E config space !", np);
arch/powerpc/platforms/44x/pci.c
2034
printk(KERN_ERR "%pOF: Can't get UTL register base !", np);
arch/powerpc/platforms/44x/pci.c
2041
printk(KERN_ERR "%pOF: Can't get DCR register base !", np);
arch/powerpc/platforms/44x/pci.c
2048
printk(KERN_WARNING "PCIE%d: Port init failed\n", port->index);
arch/powerpc/platforms/44x/pci.c
230
printk(KERN_WARNING "%pOF: Resource out of range\n", hose->dn);
arch/powerpc/platforms/44x/pci.c
262
printk(KERN_WARNING "%pOF: Too many ranges\n", hose->dn);
arch/powerpc/platforms/44x/pci.c
287
printk(KERN_INFO "%pOF: Legacy ISA memory support enabled\n",
arch/powerpc/platforms/44x/pci.c
328
printk(KERN_INFO "%pOF: Port disabled via device-tree\n", np);
arch/powerpc/platforms/44x/pci.c
334
printk(KERN_ERR "%pOF: Can't get PCI config register base !",
arch/powerpc/platforms/44x/pci.c
340
printk(KERN_ERR "%pOF: Can't get PCI internal register base !",
arch/powerpc/platforms/44x/pci.c
355
printk(KERN_ERR "%pOF: Can't map registers !", np);
arch/powerpc/platforms/44x/pci.c
417
printk(KERN_WARNING "%pOF: Resource out of range\n",
arch/powerpc/platforms/44x/pci.c
461
printk(KERN_WARNING "%pOF: Too many ranges\n", hose->dn);
arch/powerpc/platforms/44x/pci.c
486
printk(KERN_INFO "%pOF: Legacy ISA memory support enabled\n",
arch/powerpc/platforms/44x/pci.c
532
printk(KERN_ERR "%pOF: Can't get PCI-X config register base !",
arch/powerpc/platforms/44x/pci.c
538
printk(KERN_ERR "%pOF: Can't get PCI-X internal register base !",
arch/powerpc/platforms/44x/pci.c
558
printk(KERN_ERR "%pOF: Can't map registers !", np);
arch/powerpc/platforms/44x/pci.c
681
printk(KERN_WARNING "PCIE%d: PGRST failed\n",
arch/powerpc/platforms/44x/pci.c
691
printk(KERN_INFO "PCIE%d: Checking link...\n", port->index);
arch/powerpc/platforms/44x/pci.c
703
printk(KERN_INFO
arch/powerpc/platforms/44x/pci.c
708
printk(KERN_WARNING
arch/powerpc/platforms/44x/pci.c
711
printk(KERN_INFO
arch/powerpc/platforms/44x/pci.c
716
printk(KERN_INFO "PCIE%d: No device detected.\n", port->index);
arch/powerpc/platforms/44x/pci.c
749
printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n");
arch/powerpc/platforms/44x/pci.c
757
printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n");
arch/powerpc/platforms/44x/pci.c
765
printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n");
arch/powerpc/platforms/44x/pci.c
773
printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n");
arch/powerpc/platforms/44x/pci.c
781
printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n");
arch/powerpc/platforms/44x/pci.c
789
printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n");
arch/powerpc/platforms/44x/pci.c
809
printk(KERN_INFO "PCIE: PESDR_PLLCT2 resistance calibration "
arch/powerpc/platforms/44x/pci.c
827
printk(KERN_INFO "PCIE: VCO output not locked\n");
arch/powerpc/platforms/44x/pci.c
87
printk(KERN_INFO "PCI: Hiding 4xx host bridge resources %s\n",
arch/powerpc/platforms/44x/soc.c
109
printk(KERN_ERR "irq_of_parse_and_map failed\n");
arch/powerpc/platforms/44x/soc.c
116
printk(KERN_ERR "Cannot install L2C error handler"
arch/powerpc/platforms/44x/soc.c
183
printk(KERN_INFO "%dk L2-cache enabled\n", l2_size >> 10);
arch/powerpc/platforms/44x/soc.c
50
printk(KERN_EMERG "L2C: Cache Parity Error, addr[16:26] = 0x%08x\n",
arch/powerpc/platforms/44x/soc.c
56
printk(KERN_EMERG "L2C: Tag Parity Error, addr[16:26] = 0x%08x\n",
arch/powerpc/platforms/44x/soc.c
65
printk(KERN_EMERG "L2C: LRU error\n");
arch/powerpc/platforms/44x/soc.c
90
printk(KERN_ERR "%pOF: Can't get cache-size!\n", np);
arch/powerpc/platforms/44x/soc.c
99
printk(KERN_ERR "%pOF: Can't get DCR register base !", np);
arch/powerpc/platforms/44x/uic.c
243
printk(KERN_ERR "uic: Device node %pOF has missing or invalid "
arch/powerpc/platforms/44x/uic.c
251
printk(KERN_ERR "uic: Device node %pOF has missing or invalid "
arch/powerpc/platforms/44x/uic.c
270
printk ("UIC%d (%d IRQ sources) at DCR 0x%x\n", uic->index,
arch/powerpc/platforms/44x/warp.c
126
printk(KERN_EMERG "\n\nCritical Temperature Shutdown\n\n");
arch/powerpc/platforms/44x/warp.c
161
printk(KERN_ERR __FILE__ ": Unable to find leds\n");
arch/powerpc/platforms/44x/warp.c
173
printk(KERN_ERR __FILE__ ": %s led has already been defined\n",
arch/powerpc/platforms/44x/warp.c
183
printk(KERN_ERR __FILE__ ": Failed to get %s led gpio: %d\n",
arch/powerpc/platforms/44x/warp.c
200
printk(KERN_ERR __FILE__ ": Unable to add leds-gpio: %d\n",
arch/powerpc/platforms/44x/warp.c
233
printk(KERN_ERR __FILE__ ": Unable to get ad7414 irq\n");
arch/powerpc/platforms/44x/warp.c
239
printk(KERN_ERR __FILE__
arch/powerpc/platforms/44x/warp.c
253
printk(KERN_WARNING "Fan rotation error detected."
arch/powerpc/platforms/44x/warp.c
277
printk(KERN_INFO "Warp DTM thread running.\n");
arch/powerpc/platforms/44x/warp.c
77
printk(KERN_INFO "Warp POST %08x %08x\n", post1, post2);
arch/powerpc/platforms/44x/warp.c
79
printk(KERN_INFO "Warp POST OK\n");
arch/powerpc/platforms/512x/mpc5121_ads.c
26
printk(KERN_INFO "MPC5121 ADS board from Freescale Semiconductor\n");
arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
150
printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n");
arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
168
printk(KERN_ERR "CPLD PIC init: can not find cpld-pic node\n");
arch/powerpc/platforms/512x/mpc5121_ads_cpld.c
194
printk(KERN_ERR "CPLD PIC: failed to allocate irq host!\n");
arch/powerpc/platforms/512x/mpc512x_shared.c
335
printk(KERN_ERR __FILE__ ": "
arch/powerpc/platforms/52xx/efika.c
105
printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI bus %d",
arch/powerpc/platforms/52xx/efika.c
108
printk(KERN_INFO EFIKA_PLATFORM_NAME ": PCI buses %d..%d",
arch/powerpc/platforms/52xx/efika.c
110
printk(" controlled by %pOF\n", pcictrl);
arch/powerpc/platforms/52xx/efika.c
111
printk("\n");
arch/powerpc/platforms/52xx/efika.c
115
printk(KERN_WARNING EFIKA_PLATFORM_NAME
arch/powerpc/platforms/52xx/efika.c
80
printk(KERN_WARNING EFIKA_PLATFORM_NAME
arch/powerpc/platforms/52xx/efika.c
92
printk(KERN_WARNING EFIKA_PLATFORM_NAME
arch/powerpc/platforms/52xx/efika.c
99
printk(KERN_WARNING EFIKA_PLATFORM_NAME
arch/powerpc/platforms/52xx/lite5200.c
62
printk(KERN_ERR "%s() failed; expect abnormal behaviour\n",
arch/powerpc/platforms/52xx/lite5200.c
97
printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
arch/powerpc/platforms/52xx/lite5200_pm.c
73
printk(KERN_ERR "%s:%i Error mapping registers\n", __func__, __LINE__);
arch/powerpc/platforms/52xx/media5200.c
212
printk(KERN_ERR "%s() failed. expect abnormal behavior\n",
arch/powerpc/platforms/52xx/mpc52xx_common.c
218
printk(KERN_ERR __FILE__ ": "
arch/powerpc/platforms/52xx/mpc52xx_common.c
64
printk(KERN_ERR __FILE__ ": "
arch/powerpc/platforms/52xx/mpc52xx_pci.c
288
printk(KERN_ERR "%s: Didn't find IO resources\n", __FILE__);
arch/powerpc/platforms/52xx/mpc52xx_pci.c
368
printk(KERN_ERR "Can't get %pOF resources\n", node);
arch/powerpc/platforms/52xx/mpc52xx_pci.c
374
printk(KERN_WARNING "Can't get %pOF bus-range, assume bus 0\n",
arch/powerpc/platforms/52xx/mpc52xx_pm.c
100
printk(KERN_ALERT "%s: %i don't know how to wake up the board\n",
arch/powerpc/platforms/82xx/ep8248e.c
259
printk(KERN_ERR "No bcsr in device tree\n");
arch/powerpc/platforms/82xx/ep8248e.c
265
printk(KERN_ERR "Cannot map BCSR registers\n");
arch/powerpc/platforms/82xx/ep8248e.c
51
printk(KERN_ERR "PIC init: can not find cpm-pic node\n");
arch/powerpc/platforms/83xx/misc.c
53
printk (KERN_EMERG "Error: Restart registers not mapped, spinning!\n");
arch/powerpc/platforms/85xx/c293pcie.c
42
printk(KERN_INFO "C293 PCIE board from Freescale Semiconductor\n");
arch/powerpc/platforms/85xx/common.c
75
printk(KERN_ERR "PIC init: can not find fsl,cpm2-pic node\n");
arch/powerpc/platforms/85xx/common.c
81
printk(KERN_ERR "PIC init: got no IRQ for cpm cascade\n");
arch/powerpc/platforms/85xx/ge_imp3a.c
122
printk(KERN_WARNING "Unable to map board registers\n");
arch/powerpc/platforms/85xx/ge_imp3a.c
130
printk(KERN_INFO "GE Intelligent Platforms IMP3A 3U cPCI SBC\n");
arch/powerpc/platforms/85xx/ge_imp3a.c
73
printk(KERN_WARNING "IMP3A: No FPGA PIC\n");
arch/powerpc/platforms/85xx/ksi8560.c
135
printk(KERN_ERR "Can't find CPLD in device tree\n");
arch/powerpc/platforms/85xx/ksi8560.c
52
printk(KERN_ERR "Can't find CPLD base, hang forever\n");
arch/powerpc/platforms/85xx/mpc8536_ds.c
50
printk("MPC8536 DS board from Freescale Semiconductor\n");
arch/powerpc/platforms/85xx/p1010rdb.c
49
printk(KERN_INFO "P1010 RDB board from Freescale Semiconductor\n");
arch/powerpc/platforms/85xx/p1023_rdb.c
55
printk(KERN_ERR
arch/powerpc/platforms/85xx/smp.c
460
printk(KERN_ERR "Unable to bring down secondary cpu(s)");
arch/powerpc/platforms/85xx/socrates.c
52
printk(KERN_ERR "Could not find socrates-fpga-pic node\n");
arch/powerpc/platforms/85xx/xes_mpc85xx.c
125
printk(KERN_INFO "X-ES MPC85xx-based single-board computer: %s\n",
arch/powerpc/platforms/85xx/xes_mpc85xx.c
59
printk(KERN_INFO "xes_mpc85xx: Enabling L2 as cache\n");
arch/powerpc/platforms/85xx/xes_mpc85xx.c
99
printk(KERN_WARNING "xes_mpc85xx: Could not get "
arch/powerpc/platforms/86xx/gef_ppc9a.c
166
printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
arch/powerpc/platforms/86xx/gef_ppc9a.c
42
#define DBG (fmt...) do { printk(KERN_ERR "PPC9A: " fmt); } while (0)
arch/powerpc/platforms/86xx/gef_ppc9a.c
61
printk(KERN_WARNING "PPC9A: No FPGA PIC\n");
arch/powerpc/platforms/86xx/gef_ppc9a.c
73
printk(KERN_INFO "GE Intelligent Platforms PPC9A 6U VME SBC\n");
arch/powerpc/platforms/86xx/gef_ppc9a.c
86
printk(KERN_WARNING "Unable to map board registers\n");
arch/powerpc/platforms/86xx/gef_sbc310.c
153
printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
arch/powerpc/platforms/86xx/gef_sbc310.c
42
#define DBG (fmt...) do { printk(KERN_ERR "SBC310: " fmt); } while (0)
arch/powerpc/platforms/86xx/gef_sbc310.c
61
printk(KERN_WARNING "SBC310: No FPGA PIC\n");
arch/powerpc/platforms/86xx/gef_sbc310.c
72
printk(KERN_INFO "GE Intelligent Platforms SBC310 6U VPX SBC\n");
arch/powerpc/platforms/86xx/gef_sbc310.c
85
printk(KERN_WARNING "Unable to map board registers\n");
arch/powerpc/platforms/86xx/gef_sbc610.c
143
printk(KERN_INFO "Running NEC uPD720101 Fixup\n");
arch/powerpc/platforms/86xx/gef_sbc610.c
42
#define DBG (fmt...) do { printk(KERN_ERR "SBC610: " fmt); } while (0)
arch/powerpc/platforms/86xx/gef_sbc610.c
61
printk(KERN_WARNING "SBC610: No FPGA PIC\n");
arch/powerpc/platforms/86xx/gef_sbc610.c
73
printk(KERN_INFO "GE Intelligent Platforms SBC610 6U VPX SBC\n");
arch/powerpc/platforms/86xx/gef_sbc610.c
86
printk(KERN_WARNING "Unable to map board registers\n");
arch/powerpc/platforms/86xx/pic.c
54
printk(KERN_DEBUG "Could not find i8259 PIC\n");
arch/powerpc/platforms/86xx/pic.c
60
printk(KERN_ERR "Failed to map cascade interrupt\n");
arch/powerpc/platforms/8xx/cpm1.c
105
printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
arch/powerpc/platforms/8xx/cpm1.c
339
printk(KERN_ERR "cpm1_clock_setup: invalid clock target\n");
arch/powerpc/platforms/8xx/cpm1.c
351
printk(KERN_ERR "cpm1_clock_setup: invalid clock combination\n");
arch/powerpc/platforms/8xx/ep88xc.c
128
printk(KERN_CRIT "Could not find fsl,ep88xc-bcsr node\n");
arch/powerpc/platforms/8xx/ep88xc.c
136
printk(KERN_CRIT "Could not remap BCSR\n");
arch/powerpc/platforms/8xx/m8xx_setup.c
34
printk ("timebase_interrupt()\n");
arch/powerpc/platforms/8xx/m8xx_setup.c
81
printk(KERN_ERR "WARNING: Estimating processor frequency "
arch/powerpc/platforms/8xx/m8xx_setup.c
85
printk("Decrementer Frequency = 0x%lx\n", ppc_tb_freq);
arch/powerpc/platforms/8xx/mpc86xads_setup.c
103
printk(KERN_CRIT "Could not find fsl,mpc866ads-bcsr node\n");
arch/powerpc/platforms/8xx/mpc86xads_setup.c
111
printk(KERN_CRIT "Could not remap BCSR\n");
arch/powerpc/platforms/8xx/mpc885ads_setup.c
136
printk(KERN_CRIT "Could not find fsl,mpc885ads-bcsr node\n");
arch/powerpc/platforms/8xx/mpc885ads_setup.c
145
printk(KERN_CRIT "Could not remap BCSR\n");
arch/powerpc/platforms/8xx/pic.c
137
printk(KERN_ERR "Could not find fsl,pq1-pic node\n");
arch/powerpc/platforms/8xx/pic.c
152
printk(KERN_ERR "MPC8xx PIC: failed to allocate irq host!\n");
arch/powerpc/platforms/amigaone/setup.c
107
printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
arch/powerpc/platforms/amigaone/setup.c
40
printk(KERN_INFO "Adding PCI host bridge %pOF\n", dev);
arch/powerpc/platforms/amigaone/setup.c
49
printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
arch/powerpc/platforms/cell/spu_base.c
497
printk(KERN_ERR "%s: can't create sysfs group '%s'\n",
arch/powerpc/platforms/cell/spu_base.c
544
printk(KERN_ERR "Can't register SPU %d with sysfs\n",
arch/powerpc/platforms/cell/spu_base.c
721
printk(KERN_ERR "Could not register SPU crash handler");
arch/powerpc/platforms/cell/spu_base.c
770
printk(KERN_WARNING "%s: Error initializing spus\n",
arch/powerpc/platforms/cell/spufs/inode.c
662
printk(KERN_INFO "spufs: SPU isolation mode enabled\n");
arch/powerpc/platforms/cell/spufs/run.c
113
printk(KERN_ERR "%s: timeout flushing MFC DMA queue\n",
arch/powerpc/platforms/cell/spufs/run.c
142
printk(KERN_ERR "%s: timeout waiting for loader\n",
arch/powerpc/platforms/cell/spufs/run.c
302
printk(KERN_WARNING "%s: unexpected return code %ld\n",
arch/powerpc/platforms/chrp/nvram.c
29
printk(KERN_DEBUG "%s: read addr %d > nvram_size %u\n",
arch/powerpc/platforms/chrp/nvram.c
50
printk(KERN_DEBUG "%s: write addr %d > nvram_size %u\n",
arch/powerpc/platforms/chrp/nvram.c
58
printk(KERN_DEBUG "rtas IO error storing 0x%02x at %d", val, addr);
arch/powerpc/platforms/chrp/nvram.c
85
printk(KERN_INFO "CHRP nvram contains %u bytes\n", nvram_size);
arch/powerpc/platforms/chrp/pci.c
146
printk("Hydra Mac I/O at %llx\n", (unsigned long long)r.start);
arch/powerpc/platforms/chrp/pci.c
147
printk("Hydra Feature_Control was %x",
arch/powerpc/platforms/chrp/pci.c
157
printk(", now %x\n", in_le32(&Hydra->Feature_Control));
arch/powerpc/platforms/chrp/pci.c
171
printk(KERN_ERR "No address for Python PCI controller\n");
arch/powerpc/platforms/chrp/pci.c
199
printk ("RTAS supporting Pegasos OF not found, please upgrade"
arch/powerpc/platforms/chrp/pci.c
238
printk(KERN_WARNING "Can't use %pOF: no address\n",
arch/powerpc/platforms/chrp/pci.c
244
printk(KERN_WARNING "Can't get bus-range for %pOF\n",
arch/powerpc/platforms/chrp/pci.c
249
printk(KERN_INFO "PCI bus %d", bus_range[0]);
arch/powerpc/platforms/chrp/pci.c
251
printk(KERN_INFO "PCI buses %d..%d",
arch/powerpc/platforms/chrp/pci.c
253
printk(" controlled by %pOF", dev);
arch/powerpc/platforms/chrp/pci.c
255
printk(" at %llx", (unsigned long long)r.start);
arch/powerpc/platforms/chrp/pci.c
256
printk("\n");
arch/powerpc/platforms/chrp/pci.c
260
printk("Can't allocate PCI controller structure for %pOF\n",
arch/powerpc/platforms/chrp/pci.c
300
printk("No methods for %pOF (model %s), using RTAS\n",
arch/powerpc/platforms/chrp/pci.c
312
printk("pci_dram_offset = %lx\n", pci_dram_offset);
arch/powerpc/platforms/chrp/pci.c
343
printk("W83C553: Switching SL82C105 IDE to PCI native mode\n");
arch/powerpc/platforms/chrp/pegasos_eth.c
131
printk("Pegasos II/Marvell MV64361: register remapped from %p to %p\n",
arch/powerpc/platforms/chrp/pegasos_eth.c
154
printk("Pegasos II/Marvell MV64361: register unmapped\n");
arch/powerpc/platforms/chrp/pegasos_eth.c
155
printk("Pegasos II/Marvell MV64361: SRAM at %p, size=%x\n", (void*) PEGASOS2_SRAM_BASE, PEGASOS2_SRAM_SIZE);
arch/powerpc/platforms/chrp/pegasos_eth.c
176
printk("Pegasos II/Marvell MV64361: init\n");
arch/powerpc/platforms/chrp/pegasos_eth.c
191
printk("Pegasos II/Marvell MV64361: Can't enable the "
arch/powerpc/platforms/chrp/pegasos_eth.c
198
printk("Pegasos II/Marvell MV64361: init is over\n");
arch/powerpc/platforms/chrp/setup.c
187
printk(KERN_WARNING "sio: %s irq level %d, type %d, %sactive: "
arch/powerpc/platforms/chrp/setup.c
230
printk ("Pegasos l2cr : no cpu l2cr property found\n");
arch/powerpc/platforms/chrp/setup.c
234
printk ("Pegasos l2cr : L2 cache was not active, "
arch/powerpc/platforms/chrp/setup.c
323
printk("chrp type = %x [%s]\n", _chrp_type, chrp_names[_chrp_type]);
arch/powerpc/platforms/chrp/setup.c
395
printk(KERN_INFO "OpenPIC at %lx\n", opaddr);
arch/powerpc/platforms/chrp/setup.c
408
printk(KERN_ERR "Insufficient addresses for distributed"
arch/powerpc/platforms/chrp/setup.c
415
printk(KERN_INFO "OpenPIC irqs %d..%d in IDU\n",
arch/powerpc/platforms/chrp/setup.c
424
printk(KERN_ERR "Failed to allocate MPIC structure\n");
arch/powerpc/platforms/chrp/setup.c
431
printk(KERN_INFO "OpenPIC irqs %d..%d in ISU at %x\n",
arch/powerpc/platforms/chrp/setup.c
461
printk(KERN_ERR "i8259: Not found in device-tree"
arch/powerpc/platforms/chrp/setup.c
483
printk(KERN_WARNING "Cannot find PCI interrupt acknowledge"
arch/powerpc/platforms/chrp/setup.c
494
printk(KERN_ERR "i8259: failed to map cascade irq\n");
arch/powerpc/platforms/embedded6xx/holly.c
137
printk(KERN_INFO "PPC750GX/CL Platform\n");
arch/powerpc/platforms/embedded6xx/holly.c
174
printk(KERN_ERR "%s: No tsi108 pci node found !\n", __func__);
arch/powerpc/platforms/embedded6xx/holly.c
180
printk(KERN_ERR "%s: No tsi108 pci cascade node found !\n", __func__);
arch/powerpc/platforms/embedded6xx/holly.c
59
printk(KERN_INFO "Remapping PCI bridge\n");
arch/powerpc/platforms/embedded6xx/linkstation.c
44
printk("Adding PCI host bridge %pOF\n", dev);
arch/powerpc/platforms/embedded6xx/linkstation.c
48
printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
arch/powerpc/platforms/embedded6xx/linkstation.c
67
printk(KERN_INFO "BUFFALO Network Attached Storage Series\n");
arch/powerpc/platforms/embedded6xx/linkstation.c
68
printk(KERN_INFO "(C) 2002-2005 BUFFALO INC.\n");
arch/powerpc/platforms/embedded6xx/ls_uart.c
46
printk("linkstation: disarming the AVR watchdog: ");
arch/powerpc/platforms/embedded6xx/ls_uart.c
48
printk("%c", in_8(avr_addr + UART_RX));
arch/powerpc/platforms/embedded6xx/ls_uart.c
54
printk("\n");
arch/powerpc/platforms/embedded6xx/storcenter.c
46
printk("Adding PCI host bridge %pOF\n", dev);
arch/powerpc/platforms/embedded6xx/storcenter.c
68
printk(KERN_INFO "IOMEGA StorCenter\n");
arch/powerpc/platforms/pasemi/setup.c
309
printk("[%04x] : %s\n", hex, s ? s : "");
arch/powerpc/platforms/pasemi/setup.c
61
printk("Restarting...\n");
arch/powerpc/platforms/powermac/feature.c
1178
printk(KERN_ERR "core99_usb_enable: "
arch/powerpc/platforms/powermac/feature.c
2521
printk(KERN_DEBUG "Processor NAP mode on idle enabled.\n");
arch/powerpc/platforms/powermac/feature.c
2538
printk(KERN_INFO "PowerMac motherboard: %s\n", pmac_mb.model_name);
arch/powerpc/platforms/powermac/feature.c
2585
printk(KERN_INFO "Found %s memory controller & host bridge"
arch/powerpc/platforms/powermac/feature.c
2589
printk(KERN_INFO "Mapped at 0x%08lx\n", (unsigned long)uninorth_base);
arch/powerpc/platforms/powermac/feature.c
2636
printk(KERN_ERR "pmac_feature: Please increase MAX_MACIO_CHIPS !\n");
arch/powerpc/platforms/powermac/feature.c
2637
printk(KERN_ERR "pmac_feature: %pOF skipped\n", node);
arch/powerpc/platforms/powermac/feature.c
2642
printk(KERN_ERR "pmac_feature: %pOF: can't find base !\n",
arch/powerpc/platforms/powermac/feature.c
2648
printk(KERN_ERR "pmac_feature: %pOF, can't translate base !\n",
arch/powerpc/platforms/powermac/feature.c
2654
printk(KERN_ERR "pmac_feature: %pOF, can't map mac-io chip !\n",
arch/powerpc/platforms/powermac/feature.c
2675
printk(KERN_INFO "Found a %s mac-io controller, rev: %d, mapped at 0x%p\n",
arch/powerpc/platforms/powermac/feature.c
2885
printk(KERN_WARNING "No mac-io chip found\n");
arch/powerpc/platforms/powermac/feature.c
2891
printk(KERN_WARNING "Unknown PowerMac !\n");
arch/powerpc/platforms/powermac/feature.c
2907
printk("%s: Unknown HT link frequency %x\n", name, freq);
arch/powerpc/platforms/powermac/feature.c
2909
printk("%s: %d MHz on main link, (%d in / %d out) bits width\n",
arch/powerpc/platforms/powermac/feature.c
2928
printk("No PCI-X bridge found\n");
arch/powerpc/platforms/powermac/feature.c
2932
printk("PCI-X bridge found but not matched to pci\n");
arch/powerpc/platforms/powermac/feature.c
2937
printk("PCI-X bridge found but not matched to host\n");
arch/powerpc/platforms/powermac/feature.c
45
#define DBG(fmt...) printk(KERN_DEBUG fmt)
arch/powerpc/platforms/powermac/low_i2c.c
1096
printk(KERN_ERR "low_i2c: Invalid mode %d requested on"
arch/powerpc/platforms/powermac/low_i2c.c
1208
printk(KERN_ERR "low_i2c: Can't find bus for %pOF (pfunc)\n",
arch/powerpc/platforms/powermac/low_i2c.c
1213
printk(KERN_ERR "low_i2c: Can't open i2c bus for %pOF (pfunc)\n",
arch/powerpc/platforms/powermac/low_i2c.c
180
printk(KERN_DEBUG "KW: wrong state. Got %s, state: %s " \
arch/powerpc/platforms/powermac/low_i2c.c
248
printk(KERN_WARNING "low_i2c: Keywest got an out of state"
arch/powerpc/platforms/powermac/low_i2c.c
255
printk(KERN_WARNING "low_i2c: Timeout in i2c transfer"
arch/powerpc/platforms/powermac/low_i2c.c
494
printk(KERN_ERR "low_i2c: Can't allocate host for %pOF\n",
arch/powerpc/platforms/powermac/low_i2c.c
505
printk(KERN_ERR "low_i2c: Can't find address for %pOF\n",
arch/powerpc/platforms/powermac/low_i2c.c
535
printk(KERN_WARNING
arch/powerpc/platforms/powermac/low_i2c.c
54
printk(KERN_DEBUG "low_i2c:" x); \
arch/powerpc/platforms/powermac/low_i2c.c
541
printk(KERN_ERR "low_i2c: Can't map registers for %pOF\n",
arch/powerpc/platforms/powermac/low_i2c.c
558
printk(KERN_INFO "KeyWest i2c @0x%08x irq %d %pOF\n",
arch/powerpc/platforms/powermac/low_i2c.c
592
printk(KERN_INFO " channel %d bus %s\n", channel,
arch/powerpc/platforms/powermac/low_i2c.c
62
printk(KERN_DEBUG "low_i2c:" x); \
arch/powerpc/platforms/powermac/low_i2c.c
766
printk(KERN_WARNING "low_i2c: PMU returned %d"
arch/powerpc/platforms/powermac/low_i2c.c
797
printk(KERN_INFO "PMU i2c %pOF\n", busnode);
arch/powerpc/platforms/powermac/low_i2c.c
821
printk(KERN_INFO " channel %d bus <multibus>\n", channel);
arch/powerpc/platforms/powermac/low_i2c.c
913
printk(KERN_INFO "SMU i2c %pOF\n", controller);
arch/powerpc/platforms/powermac/low_i2c.c
947
printk(KERN_INFO " channel %x bus %pOF\n",
arch/powerpc/platforms/powermac/nvram.c
294
printk(KERN_ERR "nvram: Sharp/Micron flash erase timeout !\n");
arch/powerpc/platforms/powermac/nvram.c
305
printk(KERN_ERR "nvram: Sharp/Micron flash erase failed !\n");
arch/powerpc/platforms/powermac/nvram.c
31
#define DBG(x...) printk(x)
arch/powerpc/platforms/powermac/nvram.c
327
printk(KERN_ERR "nvram: Sharp/Micron flash write timeout !\n");
arch/powerpc/platforms/powermac/nvram.c
339
printk(KERN_ERR "nvram: Sharp/Micron flash write failed !\n");
arch/powerpc/platforms/powermac/nvram.c
374
printk(KERN_ERR "nvram: AMD flash erase timeout !\n");
arch/powerpc/platforms/powermac/nvram.c
385
printk(KERN_ERR "nvram: AMD flash erase failed !\n");
arch/powerpc/platforms/powermac/nvram.c
416
printk(KERN_ERR "nvram: AMD flash write timeout !\n");
arch/powerpc/platforms/powermac/nvram.c
430
printk(KERN_ERR "nvram: AMD flash write failed !\n");
arch/powerpc/platforms/powermac/nvram.c
494
printk("nvram: Error erasing bank %d\n", core99_bank);
arch/powerpc/platforms/powermac/nvram.c
499
printk("nvram: Error writing bank %d\n", core99_bank);
arch/powerpc/platforms/powermac/nvram.c
514
printk(KERN_ERR "nvram: no address\n");
arch/powerpc/platforms/powermac/nvram.c
568
printk(KERN_ERR "Can't find NVRAM device\n");
arch/powerpc/platforms/powermac/nvram.c
615
printk(KERN_ERR "Incompatible type of NVRAM\n");
arch/powerpc/platforms/powermac/pci.c
1125
printk(KERN_INFO "PCI: %s Forcing PCI IDE into native mode\n",
arch/powerpc/platforms/powermac/pci.c
1130
printk(KERN_ERR "Rewrite of PROGIF failed !\n");
arch/powerpc/platforms/powermac/pci.c
1223
printk(KERN_INFO "PCI: Fixup U4 PCIe bridge range: %pR\n", region);
arch/powerpc/platforms/powermac/pci.c
32
#define DBG(x...) printk(x)
arch/powerpc/platforms/powermac/pci.c
469
printk(KERN_WARNING
arch/powerpc/platforms/powermac/pci.c
472
printk(KERN_WARNING "bandit isn't? (%x)\n", vendev);
arch/powerpc/platforms/powermac/pci.c
485
printk(KERN_INFO "Cache coherency enabled for bandit/PSX\n");
arch/powerpc/platforms/powermac/pci.c
517
printk(KERN_ERR "init_p2pbridge: couldn't read bridge"
arch/powerpc/platforms/powermac/pci.c
543
printk(KERN_ERR "Can't find PCI hose for OHare2 !\n");
arch/powerpc/platforms/powermac/pci.c
594
printk("Found NEC PD720100A USB2 chip with disabled"
arch/powerpc/platforms/powermac/pci.c
685
printk(KERN_WARNING "PCI: Too many ranges !\n");
arch/powerpc/platforms/powermac/pci.c
714
printk(KERN_ERR "PCI: Failed to get U3/U4 HT resources !\n");
arch/powerpc/platforms/powermac/pci.c
789
printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
arch/powerpc/platforms/powermac/pci.c
817
printk(KERN_INFO "Found %s PCI host bridge. Firmware bus number:"
arch/powerpc/platforms/powermac/pci.c
838
printk(KERN_INFO "Found %s PCI host bridge at 0x%016llx. "
arch/powerpc/platforms/powermac/pci.c
912
printk(KERN_CRIT "pmac_pci_init: can't find root "
arch/powerpc/platforms/powermac/pci.c
969
printk(KERN_INFO "Apple USB OHCI %s disabled by firmware\n",
arch/powerpc/platforms/powermac/pfunc_base.c
15
#define DBG(fmt...) printk(fmt)
arch/powerpc/platforms/powermac/pfunc_core.c
21
#define LOG_ERROR(fmt...) printk(fmt)
arch/powerpc/platforms/powermac/pfunc_core.c
26
#define DBG(fmt...) printk(fmt)
arch/powerpc/platforms/powermac/pfunc_core.c
83
printk("%s", title);
arch/powerpc/platforms/powermac/pfunc_core.c
85
printk("%02x ", *((u8 *)blob));
arch/powerpc/platforms/powermac/pfunc_core.c
88
printk("\n");
arch/powerpc/platforms/powermac/pic.c
349
printk(KERN_INFO "irq: Found primary Apple PIC %pOF for %d irqs\n",
arch/powerpc/platforms/powermac/pic.c
363
printk(KERN_INFO "irq: Found slave Apple PIC %pOF for %d irqs"
arch/powerpc/platforms/powermac/pic.c
380
printk(KERN_INFO "irq: System has %d possible interrupts\n", max_irqs);
arch/powerpc/platforms/powermac/pic.c
515
printk(KERN_ERR "Failed to setup slave MPIC\n");
arch/powerpc/platforms/powermac/setup.c
169
printk("WARNING ! Your machine is CUDA-based but your kernel\n");
arch/powerpc/platforms/powermac/setup.c
170
printk(" wasn't compiled with CONFIG_ADB_CUDA option !\n");
arch/powerpc/platforms/powermac/setup.c
183
printk("WARNING ! Your machine is PMU-based but your kernel\n");
arch/powerpc/platforms/powermac/setup.c
184
printk(" wasn't compiled with CONFIG_ADB_PMU option !\n");
arch/powerpc/platforms/powermac/setup.c
222
printk(KERN_INFO "Level 2 cache enabled\n");
arch/powerpc/platforms/powermac/smp.c
413
printk(KERN_ERR "Couldn't get primary IPI interrupt");
arch/powerpc/platforms/powermac/smp.c
528
printk("Cypress Timebase %s rc: %d\n",
arch/powerpc/platforms/powermac/smp.c
556
printk(KERN_ERR "Pulsar Timebase %s rc: %d\n",
arch/powerpc/platforms/powermac/smp.c
609
printk(KERN_ERR "Failed top open i2c bus for clock"
arch/powerpc/platforms/powermac/smp.c
613
printk(KERN_INFO "Processor timebase sync using %s i2c clock\n",
arch/powerpc/platforms/powermac/smp.c
673
printk("CPU0: L2CR is %lx\n", core99_l2_cache);
arch/powerpc/platforms/powermac/smp.c
675
printk("CPU%d: L2CR was %lx\n", cpu, _get_L2CR());
arch/powerpc/platforms/powermac/smp.c
678
printk("CPU%d: L2CR set to %lx\n", cpu, core99_l2_cache);
arch/powerpc/platforms/powermac/smp.c
686
printk("CPU0: L3CR is %lx\n", core99_l3_cache);
arch/powerpc/platforms/powermac/smp.c
688
printk("CPU%d: L3CR was %lx\n", cpu, _get_L3CR());
arch/powerpc/platforms/powermac/smp.c
691
printk("CPU%d: L3CR set to %lx\n", cpu, core99_l3_cache);
arch/powerpc/platforms/powermac/smp.c
713
printk(KERN_INFO "Processor timebase sync using"
arch/powerpc/platforms/powermac/smp.c
735
printk(KERN_INFO "Processor timebase sync using"
arch/powerpc/platforms/powermac/smp.c
745
printk(KERN_INFO "Processor timebase sync using software\n");
arch/powerpc/platforms/powermac/smp.c
774
printk(KERN_INFO "PowerMac SMP probe found %d cpus\n", ncpus);
arch/powerpc/platforms/powermac/smp.c
951
printk(KERN_INFO "CPU#%d offline\n", cpu);
arch/powerpc/platforms/powermac/time.c
188
printk(KERN_ERR "Failed to map VIA for timer calibration !\n");
arch/powerpc/platforms/powermac/time.c
42
#define DBG(x...) printk(x)
arch/powerpc/platforms/powermac/time.c
80
printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
arch/powerpc/platforms/powernv/opal-hmi.c
126
printk("%s Unknown NX check stop.\n", level);
arch/powerpc/platforms/powernv/opal-hmi.c
130
printk("%s NX checkstop on CHIP ID: %x\n", level,
arch/powerpc/platforms/powernv/opal-hmi.c
135
printk("%s [Unit: %-3s] %s\n", level,
arch/powerpc/platforms/powernv/opal-hmi.c
150
printk("%s NPU checkstop on chip %x\n", level,
arch/powerpc/platforms/powernv/opal-hmi.c
170
printk("%s NPU checkstop on chip %x: FIR%d bit %d is set\n",
arch/powerpc/platforms/powernv/opal-hmi.c
192
printk("%s Unknown Malfunction Alert of type %d\n",
arch/powerpc/platforms/powernv/opal-hmi.c
246
printk("%s%s Hypervisor Maintenance interrupt [%s]\n",
arch/powerpc/platforms/powernv/opal-hmi.c
253
printk("%s Error detail: %s\n", level, error_info);
arch/powerpc/platforms/powernv/opal-hmi.c
254
printk("%s HMER: %016llx\n", level,
arch/powerpc/platforms/powernv/opal-hmi.c
258
printk("%s TFMR: %016llx\n", level,
arch/powerpc/platforms/powernv/opal-hmi.c
75
printk("%s Unknown Core check stop.\n", level);
arch/powerpc/platforms/powernv/opal-hmi.c
79
printk("%s CPU PIR: %08x\n", level,
arch/powerpc/platforms/powernv/opal-hmi.c
84
printk("%s [Unit: %-3s] %s\n", level,
arch/powerpc/platforms/powernv/pci-ioda.c
77
printk("%spci %s: [PE# %.2x] %pV",
arch/powerpc/platforms/powernv/setup.c
177
printk(" _ _______________\n");
arch/powerpc/platforms/powernv/setup.c
416
printk(KERN_INFO "kexec: waiting for cpu %d "
arch/powerpc/platforms/powernv/setup.c
428
printk(KERN_ERR "kexec: timed out waiting for "
arch/powerpc/platforms/ps3/device-init.c
337
printk(KERN_ERR "%s:%u: _read_stor_dev_info failed %d\n",
arch/powerpc/platforms/ps3/device-init.c
365
printk(KERN_ERR "%s:%u: find_interrupt failed %d\n", __func__,
arch/powerpc/platforms/ps3/device-init.c
380
printk(KERN_ERR
arch/powerpc/platforms/ps3/device-init.c
916
printk(KERN_ERR "%s: Cannot find bus (%d)\n", __func__, result);
arch/powerpc/platforms/ps3/device-init.c
923
printk(KERN_ERR "%s: read_bus_id failed %d\n", __func__,
arch/powerpc/platforms/ps3/device-init.c
933
printk(KERN_ERR "%s: kthread_run failed %d\n", __func__,
arch/powerpc/platforms/ps3/setup.c
102
printk("\n");
arch/powerpc/platforms/ps3/setup.c
103
printk(" System does not reboot automatically.\n");
arch/powerpc/platforms/ps3/setup.c
104
printk(" Please press POWER button.\n");
arch/powerpc/platforms/ps3/setup.c
105
printk("\n");
arch/powerpc/platforms/ps3/setup.c
121
printk(KERN_INFO "%s: %lu bytes at %p\n", p->name, p->size,
arch/powerpc/platforms/ps3/setup.c
230
printk(KERN_INFO "PS3 firmware version %s\n", ps3_firmware_version_str);
arch/powerpc/platforms/ps3/setup.c
249
printk("*** %04x : %s\n", hex, s ? s : "");
arch/powerpc/platforms/ps3/spu.c
417
printk(KERN_WARNING "%s:%d: Error initializing spus\n",
arch/powerpc/platforms/pseries/cmm.c
79
#define cmm_dbg(...) if (cmm_debug) { printk(KERN_INFO "cmm: "__VA_ARGS__); }
arch/powerpc/platforms/pseries/dlpar.c
216
printk(KERN_ERR "Unexpected Error (%d) "
arch/powerpc/platforms/pseries/dlpar.c
243
printk(KERN_ERR "Failed to add device node %pOF\n", dn);
arch/powerpc/platforms/pseries/dtl.c
147
printk(KERN_WARNING "%s: DTL registration for cpu %d (hw %d) "
arch/powerpc/platforms/pseries/dtl.c
200
printk(KERN_WARNING "%s: buffer alloc failed for cpu %d\n",
arch/powerpc/platforms/pseries/hotplug-cpu.c
322
printk(KERN_WARNING "Could not find cpu to remove "
arch/powerpc/platforms/pseries/hotplug-cpu.c
424
printk(KERN_WARNING "Could not find cpu to online "
arch/powerpc/platforms/pseries/hotplug-cpu.c
868
printk(KERN_INFO "CPU Hotplug not supported by firmware "
arch/powerpc/platforms/pseries/hvcserver.c
167
printk(KERN_WARNING "HVCONSOLE: kmalloc() failed to"
arch/powerpc/platforms/pseries/ibmebus.c
209
printk(KERN_ERR "%s: failed to create device (%i)",
arch/powerpc/platforms/pseries/ibmebus.c
288
printk(KERN_WARNING "%s: %s has already been probed\n",
arch/powerpc/platforms/pseries/ibmebus.c
298
printk(KERN_WARNING "%s: no such device node: %s\n",
arch/powerpc/platforms/pseries/ibmebus.c
328
printk(KERN_WARNING "%s: %s not on the bus\n",
arch/powerpc/platforms/pseries/ibmebus.c
453
printk(KERN_INFO "IBM eBus Device Driver\n");
arch/powerpc/platforms/pseries/ibmebus.c
457
printk(KERN_ERR "%s: failed to register IBM eBus.\n",
arch/powerpc/platforms/pseries/ibmebus.c
464
printk(KERN_WARNING "%s: device_register returned %i\n",
arch/powerpc/platforms/pseries/iommu.c
1868
printk(KERN_WARNING "pci_dma_dev_setup_pSeriesLP: "
arch/powerpc/platforms/pseries/iommu.c
235
printk("tce_build_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
arch/powerpc/platforms/pseries/iommu.c
236
printk("\tindex = 0x%llx\n", (u64)liobn);
arch/powerpc/platforms/pseries/iommu.c
237
printk("\ttcenum = 0x%llx\n", (u64)tcenum);
arch/powerpc/platforms/pseries/iommu.c
238
printk("\ttce val = 0x%llx\n", tce );
arch/powerpc/platforms/pseries/iommu.c
2543
printk(KERN_INFO "Disabling MULTITCE firmware feature\n");
arch/powerpc/platforms/pseries/iommu.c
327
printk("tce_buildmulti_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
arch/powerpc/platforms/pseries/iommu.c
328
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
arch/powerpc/platforms/pseries/iommu.c
329
printk("\tnpages = 0x%llx\n", (u64)npages);
arch/powerpc/platforms/pseries/iommu.c
330
printk("\ttce[0] val = 0x%llx\n", tcep[0]);
arch/powerpc/platforms/pseries/iommu.c
345
printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
arch/powerpc/platforms/pseries/iommu.c
346
printk("\tindex = 0x%llx\n", (u64)liobn);
arch/powerpc/platforms/pseries/iommu.c
347
printk("\ttcenum = 0x%llx\n", (u64)tcenum);
arch/powerpc/platforms/pseries/iommu.c
377
printk("tce_freemulti_pSeriesLP: plpar_tce_stuff failed\n");
arch/powerpc/platforms/pseries/iommu.c
378
printk("\trc = %lld\n", rc);
arch/powerpc/platforms/pseries/iommu.c
379
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
arch/powerpc/platforms/pseries/iommu.c
380
printk("\tnpages = 0x%llx\n", (u64)npages);
arch/powerpc/platforms/pseries/iommu.c
394
printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%lld\n", rc);
arch/powerpc/platforms/pseries/iommu.c
395
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
arch/powerpc/platforms/pseries/iommu.c
396
printk("\ttcenum = 0x%llx\n", (u64)tcenum);
arch/powerpc/platforms/pseries/iommu.c
599
printk(KERN_ERR "PCI_DMA: iommu_table_setparms: %pOF has "
arch/powerpc/platforms/pseries/iommu.c
933
printk(KERN_WARNING "iommu: Device %s has no iommu table\n",
arch/powerpc/platforms/pseries/iommu.c
942
printk(KERN_INFO "ppc iommu: disabling ddw.\n");
arch/powerpc/platforms/pseries/lparcfg.c
467
printk(KERN_ERR "cpus_dn %p\n", cpus_dn);
arch/powerpc/platforms/pseries/lparcfg.c
824
printk(KERN_ERR "Failed to create powerpc/lparcfg\n");
arch/powerpc/platforms/pseries/nvram.c
175
printk(KERN_ERR "nvram_clear_error_log: Failed nvram_write (%d)\n", rc);
arch/powerpc/platforms/pseries/nvram.c
232
printk(KERN_INFO "PPC64 nvram contains %d bytes\n", nvram_size);
arch/powerpc/platforms/pseries/pci.c
220
printk("Using INTC for W82c105 IDE controller.\n");
arch/powerpc/platforms/pseries/pci_dlpar.c
89
printk(KERN_ERR "%s: failed to unmap IO on bus %s\n",
arch/powerpc/platforms/pseries/pseries_energy.c
106
printk(KERN_WARNING "cpu_to_drc_index(%d) failed", cpu);
arch/powerpc/platforms/pseries/pseries_energy.c
175
printk(KERN_WARNING "drc_index_to_cpu(%d) failed", drc_index);
arch/powerpc/platforms/pseries/ras.c
418
printk(KERN_ERR "FWNMI: corrupt r3 0x%016lx\n", regs->gpr[3]);
arch/powerpc/platforms/pseries/ras.c
483
printk(KERN_ERR "FWNMI: nmi-interlock failed: %d\n", ret);
arch/powerpc/platforms/pseries/reconfig.c
123
printk(KERN_ERR "property parse failed in %s at line %d\n",
arch/powerpc/platforms/pseries/reconfig.c
130
printk(KERN_ERR "property parse failed in %s at line %d\n",
arch/powerpc/platforms/pseries/reconfig.c
139
printk(KERN_ERR "property parse failed in %s at line %d\n",
arch/powerpc/platforms/pseries/reconfig.c
144
printk(KERN_ERR "property parse failed in %s at line %d\n",
arch/powerpc/platforms/pseries/reconfig.c
153
printk(KERN_ERR "property parse failed in %s at line %d\n",
arch/powerpc/platforms/pseries/reconfig.c
158
printk(KERN_ERR "property parse failed in %s at line %d\n",
arch/powerpc/platforms/pseries/reconfig.c
48
printk(KERN_ERR "Failed to add device node %s\n", path);
arch/powerpc/platforms/pseries/setup.c
1085
printk(KERN_INFO "RTAS power-off returned %d\n", rc);
arch/powerpc/platforms/pseries/setup.c
1088
printk(KERN_INFO "RTAS ibm,power-off-ups returned %d\n", rc);
arch/powerpc/platforms/pseries/setup.c
227
printk(KERN_DEBUG "pic: no ISA interrupt controller\n");
arch/powerpc/platforms/pseries/setup.c
233
printk(KERN_ERR "pic: failed to map cascade interrupt");
arch/powerpc/platforms/pseries/setup.c
254
printk(KERN_DEBUG "pic: PCI 8259 intack at 0x%016lx\n", intack);
arch/powerpc/platforms/pseries/smp.c
117
printk(KERN_ERR "start-cpu failed: %i\n", status);
arch/powerpc/platforms/pseries/smp.c
68
printk(KERN_ERR
arch/powerpc/platforms/pseries/vio.c
1447
printk(KERN_ERR "%s: failed to register device %s\n",
arch/powerpc/platforms/pseries/vio.c
1505
printk(KERN_ERR "failed to register VIO bus\n");
arch/powerpc/platforms/pseries/vio.c
1515
printk(KERN_WARNING "%s: device_register returned %i\n",
arch/powerpc/platforms/pseries/vio.c
1714
printk(KERN_ERR "vio: Error 0x%x enabling interrupts\n", rc);
arch/powerpc/platforms/pseries/vio.c
1723
printk(KERN_ERR "vio: Error 0x%x disabling interrupts\n", rc);
arch/powerpc/platforms/pseries/vio.c
914
printk(KERN_ERR "%s: unable to determine system IO "\
arch/powerpc/platforms/pseries/vio.c
927
printk(KERN_ERR "%s: insufficient system entitlement\n",
arch/powerpc/sysdev/cpm2.c
232
printk(KERN_ERR "cpm2_clock_setup: invalid clock target\n");
arch/powerpc/sysdev/cpm2.c
292
printk(KERN_ERR "cpm2_smc_clock_setup: invalid clock target\n");
arch/powerpc/sysdev/cpm2.c
94
printk(KERN_ERR "%s(): Not able to issue CPM command\n", __func__);
arch/powerpc/sysdev/cpm2_pic.c
265
printk(KERN_ERR "CPM2 PIC: failed to allocate irq host!\n");
arch/powerpc/sysdev/dart_iommu.c
256
printk(KERN_INFO "DART table allocated at: %p\n", dart_tablebase);
arch/powerpc/sysdev/dart_iommu.c
318
printk(KERN_INFO "DART IOMMU initialized for %s type chipset\n",
arch/powerpc/sysdev/fsl_msi.c
406
printk(KERN_DEBUG "Setting up Freescale MSI support\n");
arch/powerpc/sysdev/fsl_pci.c
546
printk(KERN_WARNING "Can't get pci register base!");
arch/powerpc/sysdev/fsl_pci.c
553
printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
arch/powerpc/sysdev/fsl_pci.c
633
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
arch/powerpc/sysdev/fsl_pci.c
830
printk(KERN_WARNING "Can't get pci register base!\n");
arch/powerpc/sysdev/fsl_pci.c
837
printk(KERN_WARNING
arch/powerpc/sysdev/fsl_pci.c
861
printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
arch/powerpc/sysdev/fsl_pci.c
882
printk(KERN_INFO "Found FSL PCI host bridge at 0x%016llx. "
arch/powerpc/sysdev/fsl_pci.c
921
printk(KERN_WARNING "could not find PCI BAR matching IMMR\n");
arch/powerpc/sysdev/fsl_rio.c
737
printk(KERN_INFO "Setting up RapidIO peer-to-peer network %pOF\n",
arch/powerpc/sysdev/fsl_rmu.c
1001
printk(KERN_ERR
arch/powerpc/sysdev/fsl_rmu.c
1035
printk(KERN_ERR "RIO: unable allocate inbound doorbell ring\n");
arch/powerpc/sysdev/fsl_rmu.c
1053
printk(KERN_ERR
arch/powerpc/sysdev/fsl_rmu.c
1097
printk(KERN_INFO "%pOF: txirq: %d, rxirq %d\n",
arch/powerpc/sysdev/fsl_rmu.c
958
printk(KERN_ERR
arch/powerpc/sysdev/fsl_soc.c
166
printk (KERN_ERR "Error: reset control "
arch/powerpc/sysdev/ge/ge_pic.c
212
printk(KERN_ERR "SBC610: failed to map cascade interrupt");
arch/powerpc/sysdev/ge/ge_pic.c
33
#define DBG(fmt...) do { printk(KERN_DEBUG "gef_pic: " fmt); } while (0)
arch/powerpc/sysdev/i8259.c
266
printk(KERN_ERR "i8259: failed to allocate irq host !\n");
arch/powerpc/sysdev/i8259.c
282
printk(KERN_INFO "i8259 legacy interrupt controller initialized\n");
arch/powerpc/sysdev/ipic.c
611
printk(KERN_ERR "ipic: sense type 0x%x not supported\n",
arch/powerpc/sysdev/ipic.c
617
printk(KERN_ERR "ipic: edge sense not supported on internal "
arch/powerpc/sysdev/ipic.c
887
printk(KERN_DEBUG "Registering ipic system core operations\n");
arch/powerpc/sysdev/mmio_nvram.c
108
printk(KERN_WARNING "nvram: no node found in device-tree\n");
arch/powerpc/sysdev/mmio_nvram.c
114
printk(KERN_WARNING "nvram: failed to get address (err %d)\n",
arch/powerpc/sysdev/mmio_nvram.c
121
printk(KERN_WARNING "nvram: address or length is 0\n");
arch/powerpc/sysdev/mmio_nvram.c
128
printk(KERN_WARNING "nvram: failed to ioremap\n");
arch/powerpc/sysdev/mmio_nvram.c
133
printk(KERN_INFO "mmio NVRAM, %luk at 0x%lx mapped to %p\n",
arch/powerpc/sysdev/mpic.c
1419
printk(KERN_DEBUG "mpic: Resetting\n");
arch/powerpc/sysdev/mpic.c
1513
printk(KERN_INFO "mpic: Setting up MPIC \"%s\" version %s at %llx,"
arch/powerpc/sysdev/mpic.c
1516
printk(KERN_INFO "mpic: ISU size: %d, shift: %d, mask: %x\n",
arch/powerpc/sysdev/mpic.c
1556
printk(KERN_INFO "mpic: Initializing for %d sources\n", mpic->num_sources);
arch/powerpc/sysdev/mpic.c
1650
printk(KERN_INFO "%pOF: hooking up to IRQ %d\n",
arch/powerpc/sysdev/mpic.c
1847
printk(KERN_INFO "mpic: requesting IPIs...\n");
arch/powerpc/sysdev/mpic.c
1853
printk(KERN_ERR "Failed to map %s\n", smp_ipi_name[i]);
arch/powerpc/sysdev/mpic.c
1869
printk("SMP %d: smp_message_pass: unknown msg %d\n",
arch/powerpc/sysdev/mpic.c
360
printk(KERN_INFO "mpic: Detected reversed IPI registers\n");
arch/powerpc/sysdev/mpic.c
48
#define DBG(fmt...) printk(fmt)
arch/powerpc/sysdev/mpic.c
517
printk(KERN_INFO "mpic: - HT:%02x.%x [0x%02x] vendor %04x device %04x"
arch/powerpc/sysdev/mpic.c
547
printk(KERN_INFO "mpic: Setting up HT PICs workarounds for U3/U4\n");
arch/powerpc/sysdev/mpic.c
682
printk(KERN_ERR "%s: timeout on hwirq %u\n",
arch/powerpc/sysdev/mpic.c
704
printk(KERN_ERR "%s: timeout on hwirq %u\n",
arch/powerpc/sysdev/mpic_u3msi.c
162
printk("u3msi: allocated virq 0x%x (hw 0x%x) addr 0x%lx\n",
arch/powerpc/sysdev/msi_bitmap.c
265
printk(KERN_DEBUG "Running MSI bitmap self-tests ...\n");
arch/powerpc/sysdev/msi_bitmap.c
91
printk(KERN_WARNING "msi_bitmap: Malformed msi-available-ranges"
arch/powerpc/sysdev/of_rtc.c
38
printk(KERN_ERR "OF RTC: Out of memory "
arch/powerpc/sysdev/of_rtc.c
46
printk(KERN_ERR "OF RTC: Error "
arch/powerpc/sysdev/of_rtc.c
52
printk(KERN_INFO "OF_RTC: %pOF is a %s @ 0x%llx-0x%llx\n",
arch/powerpc/sysdev/tsi108_dev.c
32
#define DBG(fmt...) do { printk(fmt); } while(0)
arch/powerpc/sysdev/tsi108_pci.c
165
printk("PCI CFG read : ");
arch/powerpc/sysdev/tsi108_pci.c
166
printk("%d:0x%x:0x%x ", bus->number, devfn, offset);
arch/powerpc/sysdev/tsi108_pci.c
167
printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
arch/powerpc/sysdev/tsi108_pci.c
168
printk("data = 0x%x\n", *val);
arch/powerpc/sysdev/tsi108_pci.c
204
printk(KERN_WARNING "Can't get bus-range for %pOF, assume"
arch/powerpc/sysdev/tsi108_pci.c
211
printk("PCI Host bridge init failed\n");
arch/powerpc/sysdev/tsi108_pci.c
305
printk("TSI108_PIC: error in TSI108_PCI_IRP_STAT\n");
arch/powerpc/sysdev/tsi108_pci.c
31
#define DBG(x...) printk(x)
arch/powerpc/sysdev/tsi108_pci.c
311
printk(">> stat=0x%08x intad=0x%08x ", pci_irp_stat, temp);
arch/powerpc/sysdev/tsi108_pci.c
315
printk("cfg_ctl=0x%08x ", temp);
arch/powerpc/sysdev/tsi108_pci.c
319
printk("irp_enable=0x%08x\n", temp);
arch/powerpc/sysdev/tsi108_pci.c
410
printk(KERN_ERR "pci_irq_host: failed to allocate irq domain!\n");
arch/powerpc/sysdev/tsi108_pci.c
64
printk("PCI CFG write : ");
arch/powerpc/sysdev/tsi108_pci.c
65
printk("%d:0x%x:0x%x ", bus->number, devfunc, offset);
arch/powerpc/sysdev/tsi108_pci.c
66
printk("%d ADDR=0x%08x ", len, (uint) cfg_addr);
arch/powerpc/sysdev/tsi108_pci.c
67
printk("data = 0x%08x\n", val);
arch/powerpc/sysdev/xics/icp-opal.c
197
printk("XICS: Using OPAL ICP fallbacks\n");
arch/powerpc/sysdev/xics/ics-rtas.c
114
printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
arch/powerpc/sysdev/xics/ics-rtas.c
133
printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
arch/powerpc/sysdev/xics/ics-rtas.c
42
printk(KERN_ERR
arch/powerpc/sysdev/xics/ics-rtas.c
51
printk(KERN_ERR "%s: ibm_int_on irq=%u returned %d\n",
arch/powerpc/sysdev/xics/ics-rtas.c
73
printk(KERN_ERR "%s: ibm_int_off irq=%u returned %d\n",
arch/powerpc/sysdev/xics/ics-rtas.c
82
printk(KERN_ERR "%s: ibm_set_xive(0xff) irq=%u returned %d\n",
arch/riscv/kernel/traps.c
68
printk("%sCode: Unable to access instruction at 0x%px.\n",
arch/riscv/kernel/traps.c
73
printk("%sCode: %s\n", loglvl, str);
arch/s390/include/asm/hardirq.h
25
printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
arch/s390/kernel/dis.c
527
printk("%s Code: Bad PSW.\n", mode);
arch/s390/kernel/dis.c
592
printk("%s", buffer);
arch/s390/kernel/dumpstack.c
135
printk("%sCall Trace:\n", loglvl);
arch/s390/kernel/dumpstack.c
137
printk(state.reliable ? "%s [<%016lx>] %pSR \n" :
arch/s390/kernel/dumpstack.c
145
printk("Last Breaking-Event-Address:\n");
arch/s390/kernel/dumpstack.c
146
printk(" [<%016lx>] ", regs->last_break);
arch/s390/kernel/dumpstack.c
165
printk("%s PSW : %px %px", mode, (void *)regs->psw.mask, (void *)pswaddr);
arch/s390/kernel/dumpstack.c
169
printk(" R:%x T:%x IO:%x EX:%x Key:%x M:%x W:%x "
arch/s390/kernel/dumpstack.c
173
printk("%s GPRS: %016lx %016lx %016lx %016lx\n", mode,
arch/s390/kernel/dumpstack.c
175
printk(" %016lx %016lx %016lx %016lx\n",
arch/s390/kernel/dumpstack.c
177
printk(" %016lx %016lx %016lx %016lx\n",
arch/s390/kernel/dumpstack.c
179
printk(" %016lx %016lx %016lx %016lx\n",
arch/s390/kernel/dumpstack.c
206
printk("%s: %04x ilc:%d [#%d]", str, regs->int_code & 0xffff,
arch/s390/kernel/module.c
127
printk(KERN_ERR "module %s: no symbol table\n", me->name);
arch/s390/kernel/module.c
35
#define DEBUGP printk
arch/s390/kernel/module.c
415
printk(KERN_ERR "module %s: unknown relocation: %u\n",
arch/s390/kernel/module.c
420
printk(KERN_ERR "module %s: relocation error for symbol %s "
arch/s390/kernel/nmi.c
262
printk(KERN_EMERG "mcck: Terminating task because of machine "
arch/s390/kernel/nmi.c
264
printk(KERN_EMERG "mcck: task: %s, pid: %d.\n",
arch/s390/kernel/setup.c
889
printk(fmt, buf);
arch/s390/kernel/sysinfo.c
440
printk(KERN_DEBUG "Calibrating delay loop (skipped)... "
arch/sh/boards/board-apsh4a3a.c
137
printk(KERN_INFO "Alpha Project AP-SH4A-3A support:\n");
arch/sh/boards/board-magicpanelr2.c
241
printk(KERN_INFO "Magic Panel Release 2 A.%i\n",
arch/sh/boards/board-magicpanelr2.c
245
printk(KERN_WARNING "Ethernet not ready\n");
arch/sh/boards/board-polaris.c
98
printk(KERN_INFO "Configuring Polaris external bus\n");
arch/sh/boards/board-secureedge5410.c
32
printk("SnapGear: erase switch interrupt!\n");
arch/sh/boards/board-secureedge5410.c
41
printk("SnapGear: EraseConfig init\n");
arch/sh/boards/board-secureedge5410.c
45
printk("SnapGear: failed to register IRQ%d for Reset witch\n",
arch/sh/boards/board-secureedge5410.c
48
printk("SnapGear: registered EraseConfig switch on IRQ%d\n",
arch/sh/boards/board-secureedge5410.c
64
printk("Setup SnapGear IRQ/IPR ...\n");
arch/sh/boards/board-sh7757lcr.c
581
printk(KERN_INFO "Renesas R0P7757LC0012RL support.\n");
arch/sh/boards/board-sh7785lcr.c
324
printk(KERN_ERR "%s: ioremap error.\n", __func__);
arch/sh/boards/board-sh7785lcr.c
339
printk(KERN_INFO "Renesas Technology Corp. R0P7785LC0011RL support.\n");
arch/sh/boards/board-sh7785lcr.c
346
printk(KERN_ERR "%s: ioremap error.\n", __func__);
arch/sh/boards/board-urquell.c
202
printk(KERN_INFO "Renesas Technology Corp. Urquell support.\n");
arch/sh/boards/mach-ecovec24/setup.c
1063
printk(KERN_ERR "error %d\n", ret);
arch/sh/boards/mach-ecovec24/setup.c
1166
printk(KERN_INFO "USB1 function is selected\n");
arch/sh/boards/mach-ecovec24/setup.c
1169
printk(KERN_INFO "USB1 host is selected\n");
arch/sh/boards/mach-highlander/irq-r7780mp.c
65
printk(KERN_INFO "Using r7780mp interrupt controller.\n");
arch/sh/boards/mach-highlander/irq-r7780rp.c
58
printk(KERN_INFO "Using r7780rp interrupt controller.\n");
arch/sh/boards/mach-highlander/irq-r7785rp.c
69
printk(KERN_INFO "Using r7785rp interrupt controller.\n");
arch/sh/boards/mach-highlander/setup.c
354
printk(KERN_INFO "Renesas Solutions Highlander %s support.\n",
arch/sh/boards/mach-highlander/setup.c
359
printk(KERN_INFO "Board version: %d (revision %d), "
arch/sh/boards/mach-hp6xx/hp6xx_apm.c
89
printk(KERN_ERR MODNAME ": IRQ %d request failed\n",
arch/sh/boards/mach-landisk/gio.c
132
printk(KERN_INFO "gio: driver initialized\n");
arch/sh/boards/mach-landisk/gio.c
137
printk(KERN_ERR
arch/sh/boards/mach-landisk/gio.c
147
printk(KERN_ERR
arch/sh/boards/mach-landisk/setup.c
63
printk("allocate_cf_area : can't open CF I/O window!\n");
arch/sh/boards/mach-landisk/setup.c
91
printk(KERN_INFO "I-O DATA DEVICE, INC. \"LANDISK Series\" support.\n");
arch/sh/boards/mach-lboxre2/setup.c
58
printk(KERN_ERR "%s : can't open CF I/O window!\n" , __func__ );
arch/sh/boards/mach-r2d/irq.c
136
printk(KERN_INFO "Using R2D-PLUS interrupt controller.\n");
arch/sh/boards/mach-r2d/irq.c
144
printk(KERN_INFO "Using R2D-1 interrupt controller.\n");
arch/sh/boards/mach-r2d/irq.c
150
printk(KERN_INFO "Unknown R2D interrupt controller 0x%04x\n",
arch/sh/boards/mach-r2d/setup.c
273
printk(KERN_INFO "Renesas Technology Sales RTS7751R2D support.\n");
arch/sh/boards/mach-r2d/setup.c
275
printk(KERN_INFO "FPGA version:%d (revision:%d)\n",
arch/sh/boards/mach-sdk7780/irq.c
35
printk(KERN_INFO "Using SDK7780 interrupt controller.\n");
arch/sh/boards/mach-sdk7780/setup.c
77
printk(KERN_INFO "Renesas Technology Europe SDK7780 support.\n");
arch/sh/boards/mach-sdk7780/setup.c
78
printk(KERN_INFO "Board version: %d (revision %d), "
arch/sh/boards/mach-sdk7786/nmi.c
43
printk("Set NMI mode to %d\n", nmi_mode);
arch/sh/boards/mach-se/7343/irq.c
54
printk("Failed to get IRQ domain\n");
arch/sh/boards/mach-se/7343/irq.c
62
printk("Failed to allocate IRQ %d\n", i);
arch/sh/boards/mach-se/7343/setup.c
172
printk(KERN_INFO "MS7343CP01 Setup...done\n");
arch/sh/boards/mach-se/7722/irq.c
103
printk("Failed to remap IRQ01 regs\n");
arch/sh/boards/mach-se/7722/irq.c
52
printk("Failed to get IRQ domain\n");
arch/sh/boards/mach-se/7722/irq.c
60
printk("Failed to allocate IRQ %d\n", i);
arch/sh/boards/mach-se/7724/setup.c
623
printk(KERN_ERR "ms7724se can not access to eeprom\n");
arch/sh/boards/mach-se/7780/setup.c
84
printk(KERN_INFO "Hitachi UL Solutions Engine 7780SE03 support.\n");
arch/sh/boards/mach-sh03/rtc.c
59
printk(KERN_ERR
arch/sh/boards/mach-sh03/rtc.c
61
printk("year=%d, mon=%d, day=%d, hour=%d, min=%d, sec=%d\n",
arch/sh/boards/mach-sh03/setup.c
80
printk("allocate_cf_area : can't open CF I/O window!\n");
arch/sh/boards/mach-sh7763rdp/setup.c
164
printk(KERN_INFO "RTE Standard Configuration\n");
arch/sh/boards/mach-sh7763rdp/setup.c
166
printk(KERN_INFO "RTA Standard Configuration\n");
arch/sh/cchips/hd6446x/hd64461.c
104
printk(KERN_INFO "HD64461: enabling PCMCIA devices\n");
arch/sh/cchips/hd6446x/hd64461.c
79
printk(KERN_INFO
arch/sh/drivers/dma/dma-api.c
202
printk(KERN_INFO "DMA: Registering %s handler (%d channel%s).\n",
arch/sh/drivers/dma/dma-api.c
267
printk(KERN_NOTICE "DMA: Registering DMA API.\n");
arch/sh/drivers/dma/dma-g2.c
103
printk("g2dma: unaligned dest 0x%lx\n", chan->dar);
arch/sh/drivers/dma/dma-g2.c
98
printk("g2dma: unaligned source 0x%lx\n", chan->sar);
arch/sh/drivers/dma/dma-pvr2.c
24
printk(KERN_WARNING "DMA: SH DMAC did not complete transfer "
arch/sh/drivers/dma/dma-sh.c
284
printk(KERN_ERR "dma-sh: Can't initialize DMAOR.\n");
arch/sh/drivers/dma/dma-sh.c
348
printk(KERN_ERR "%s request_irq fail\n", dmae_name[n]);
arch/sh/drivers/dma/dmabrg.c
164
printk(KERN_INFO "DMABRG: DMAC ch0 not reserved!\n");
arch/sh/drivers/heartbeat.c
149
printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION);
arch/sh/drivers/pci/common.c
103
printk(KERN_DEBUG "PCI: re-enabling system error IRQ.\n");
arch/sh/drivers/pci/common.c
129
printk(KERN_DEBUG "PCI: master abort, pc=0x%08lx\n", addr);
arch/sh/drivers/pci/common.c
134
printk(KERN_DEBUG "PCI: target abort: ");
arch/sh/drivers/pci/common.c
144
printk(KERN_DEBUG "PCI: parity error detected: ");
arch/sh/drivers/pci/common.c
77
printk(KERN_DEBUG
arch/sh/drivers/pci/common.c
94
printk(KERN_DEBUG "PCI: re-enabling error IRQ.\n");
arch/sh/drivers/pci/fixups-dreamcast.c
34
printk(KERN_NOTICE "PCI: Fixing up device %s\n", pci_name(dev));
arch/sh/drivers/pci/fixups-dreamcast.c
69
printk("PCI: Failed resource fixup\n");
arch/sh/drivers/pci/fixups-landisk.c
32
printk(KERN_WARNING "PCI: Bad IRQ mapping request for slot %d pin %c\n",
arch/sh/drivers/pci/fixups-se7751.c
110
printk("SH7751 PCI: Finished initialization of the PCI controller\n");
arch/sh/drivers/pci/fixups-se7751.c
20
printk("PCI: Bad IRQ mapping request for slot %d\n", slot);
arch/sh/drivers/pci/fixups-sh03.c
18
printk(KERN_ERR "PCI: Bad IRQ mapping request "
arch/sh/drivers/pci/fixups-snapgear.c
33
printk("PCI: Mapping SnapGear IRQ for slot %d, pin %c to irq %d\n",
arch/sh/drivers/pci/fixups-titan.c
32
printk("PCI: Mapping TITAN IRQ for slot %d, pin %c to irq %d\n",
arch/sh/drivers/pci/pci-sh7751.c
27
printk("PCI: Area %d is not configured for SDRAM. BCR1=0x%lx\n",
arch/sh/drivers/pci/pci-sh7751.c
36
printk("PCI: Area %d is not 32 bit SDRAM. BCR2=0x%lx\n",
arch/sh/drivers/pci/pci-sh7751.c
81
printk(KERN_NOTICE "PCI: Starting initialization.\n");
arch/sh/drivers/pci/pci-sh7780.c
122
printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
arch/sh/drivers/pci/pci-sh7780.c
135
printk(KERN_DEBUG "PCI: %s, addr=%08lx\n",
arch/sh/drivers/pci/pci-sh7780.c
149
printk(KERN_DEBUG "PCI: system error received: ");
arch/sh/drivers/pci/pcie-sh7786.c
434
printk(KERN_NOTICE "PCI: PCIe#%d x%d link detected\n",
arch/sh/drivers/pci/pcie-sh7786.c
437
printk(KERN_NOTICE "PCI: PCIe#%d link down\n",
arch/sh/drivers/pci/pcie-sh7786.c
551
printk(KERN_NOTICE "PCI: Starting initialization.\n");
arch/sh/drivers/pci/pcie-sh7786.c
591
printk(KERN_NOTICE "PCI: probing %d ports.\n", nr_ports);
arch/sh/drivers/push-switch.c
121
printk(KERN_NOTICE DRV_NAME ": version %s loaded\n", DRV_VERSION);
arch/sh/include/asm/pgtable-3level.h
29
printk("%s:%d: bad pmd %016llx.\n", __FILE__, __LINE__, pmd_val(e))
arch/sh/include/asm/pgtable_32.h
405
printk("%s:%d: bad pte %p(%08lx%08lx).\n", __FILE__, __LINE__, \
arch/sh/include/asm/pgtable_32.h
408
printk("%s:%d: bad pgd %016llx.\n", __FILE__, __LINE__, pgd_val(e))
arch/sh/include/asm/pgtable_32.h
411
printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
arch/sh/include/asm/pgtable_32.h
413
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
arch/sh/kernel/cpu/fpu.c
59
printk(KERN_ERR "BUG: FPU is used in kernel mode.\n");
arch/sh/kernel/cpu/init.c
221
printk("FPU Disabled\n");
arch/sh/kernel/cpu/init.c
268
printk("DSP Disabled\n");
arch/sh/kernel/cpu/irq/ipr.c
68
printk(KERN_INFO "can not get irq_desc for %d\n",
arch/sh/kernel/cpu/sh4/sq.c
217
printk("%s: bad store queue address 0x%08lx\n",
arch/sh/kernel/cpu/sh4/sq.c
234
printk(KERN_ERR "%s: bad address 0x%08lx\n",
arch/sh/kernel/cpu/sh4/sq.c
377
printk(KERN_NOTICE "sq: Registering store queue API.\n");
arch/sh/kernel/cpu/sh4a/setup-sh7786.c
438
printk(KERN_INFO "sh7786 usb setup done\n");
arch/sh/kernel/cpu/sh4a/smp-shx3.c
66
printk(KERN_INFO "Detected %i available secondary CPU(s)\n", num);
arch/sh/kernel/dumpstack.c
115
printk("%s", (char *)data);
arch/sh/kernel/dumpstack.c
129
printk("%s\nCall trace:\n", loglvl);
arch/sh/kernel/dumpstack.c
25
printk("%s%s(0x%08lx to 0x%08lx)\n", loglvl, str, bottom, top);
arch/sh/kernel/dumpstack.c
28
printk("%s%04lx: ", loglvl, p & 0xffff);
arch/sh/kernel/dwarf.c
1079
printk(KERN_INFO "DWARF unwinder initialised: read %u CIEs, %u FDEs\n",
arch/sh/kernel/dwarf.c
1114
printk(KERN_WARNING "%s: failed to parse DWARF info\n",
arch/sh/kernel/dwarf.c
1202
printk(KERN_ERR "Failed to initialise DWARF unwinder: %d\n", err);
arch/sh/kernel/dwarf.c
290
printk(KERN_WARNING "Unknown DWARF extension\n");
arch/sh/kernel/dwarf.c
625
printk(KERN_ERR "Unable to allocate a dwarf frame\n");
arch/sh/kernel/dwarf.c
69
printk(KERN_WARNING "Unable to allocate a DWARF register\n");
arch/sh/kernel/irq.c
143
printk("CPU %u irqstacks, hard=%p soft=%p\n",
arch/sh/kernel/irq.c
35
printk("unexpected IRQ trap at vector %02x\n", irq);
arch/sh/kernel/kprobes.c
86
printk("Warning: removing kprobe from delay slot: 0x%.8x\n",
arch/sh/kernel/machine_kexec.c
53
printk("kexec information\n");
arch/sh/kernel/machine_kexec.c
55
printk(" segment[%d]: 0x%08x - 0x%08x (0x%08x)\n",
arch/sh/kernel/machine_kexec.c
62
printk(" start : 0x%08x\n\n", (unsigned int)image->start);
arch/sh/kernel/module.c
82
printk(KERN_ERR "module %s: Unknown relocation: %u\n",
arch/sh/kernel/nmi_debug.c
67
printk(KERN_WARNING "NMI: Unrecognized action `%s'\n",
arch/sh/kernel/setup.c
185
printk(KERN_INFO "Calibrating delay loop (skipped)... "
arch/sh/kernel/setup.c
276
printk(KERN_NOTICE "Boot params:\n"
arch/sh/kernel/sh_bios.c
81
printk(KERN_NOTICE "Setting GDB trap vector to %p\n",
arch/sh/kernel/sh_bios.c
84
printk(KERN_NOTICE "SH-BIOS not detected\n");
arch/sh/kernel/smp.c
255
printk(KERN_INFO "SMP: Total of %d processors activated "
arch/sh/kernel/smp.c
319
printk(KERN_WARNING "SMP %d: %s(): unknown IPI %d\n",
arch/sh/kernel/smp.c
44
printk(KERN_WARNING "Overriding previously set SMP ops\n");
arch/sh/kernel/topology.c
56
printk(KERN_WARNING "%s: register_cpu %d failed (%d)\n",
arch/sh/kernel/traps.c
191
printk(KERN_ALERT "Got NMI, but nobody cared. Ignoring...\n");
arch/sh/kernel/traps.c
35
printk("%s: %04lx [#%d]\n", str, err & 0xffff, ++die_counter);
arch/sh/kernel/traps.c
39
printk("Process: %s (pid: %d, stack limit = %p)\n", current->comm,
arch/sh/kernel/traps_32.c
542
printk(KERN_NOTICE "Sending SIGBUS to \"%s\" due to unaligned "
arch/sh/math-emu/math.c
279
{ printk( #i " not yet done.\n"); return 0; }
arch/sh/mm/cache-sh4.c
385
printk("PVR=%08x CVR=%08x PRR=%08x\n",
arch/sh/mm/cache.c
267
printk(KERN_NOTICE "I-cache : n_ways=%d n_sets=%d way_incr=%d\n",
arch/sh/mm/cache.c
271
printk(KERN_NOTICE "I-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
arch/sh/mm/cache.c
275
printk(KERN_NOTICE "D-cache : n_ways=%d n_sets=%d way_incr=%d\n",
arch/sh/mm/cache.c
279
printk(KERN_NOTICE "D-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
arch/sh/mm/cache.c
288
printk(KERN_NOTICE "S-cache : n_ways=%d n_sets=%d way_incr=%d\n",
arch/sh/mm/cache.c
292
printk(KERN_NOTICE "S-cache : entry_mask=0x%08x alias_mask=0x%08x n_aliases=%d\n",
arch/sparc/include/asm/floppy_32.h
116
printk("floppy: Asked to read unknown port %d\n", port);
arch/sparc/include/asm/floppy_32.h
133
printk("floppy: Asked to write to unknown port %d\n", port);
arch/sparc/include/asm/floppy_32.h
156
printk("floppy: Asked to read unknown port %d\n", port);
arch/sparc/include/asm/floppy_32.h
181
printk("floppy: Asked to write to unknown port %d\n", port);
arch/sparc/include/asm/floppy_32.h
235
printk("Unknown dma mode %d\n", mode);
arch/sparc/include/asm/floppy_64.h
104
printk("floppy: Asked to read unknown port %x\n", reg);
arch/sparc/include/asm/floppy_64.h
123
printk("floppy: Asked to write to unknown port %x\n", reg);
arch/sparc/include/asm/floppy_64.h
177
printk("Unknown dma mode %d\n", mode);
arch/sparc/include/asm/parport_64.h
62
printk(KERN_WARNING "Trying to free DMA%d\n", dmanr);
arch/sparc/include/asm/parport_64.h
66
printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr);
arch/sparc/include/asm/vio.h
473
printk(KERN_INFO "vio: ID[%lu] " f, \
arch/sparc/kernel/apc.c
149
printk(KERN_ERR "%s: unable to map registers\n", APC_DEVNAME);
arch/sparc/kernel/apc.c
155
printk(KERN_ERR "%s: unable to register device\n", APC_DEVNAME);
arch/sparc/kernel/apc.c
164
printk(KERN_INFO "%s: power management initialized%s\n",
arch/sparc/kernel/auxio_32.c
138
printk(KERN_INFO "Power off control detected.\n");
arch/sparc/kernel/auxio_64.c
118
printk("auxio: Unknown parent bus type [%pOFn]\n",
arch/sparc/kernel/auxio_64.c
126
printk(KERN_INFO "AUXIO: Found device at %pOF\n", dp);
arch/sparc/kernel/central.c
115
printk(KERN_ERR "clock_board: Could not register LEDS "
arch/sparc/kernel/central.c
120
printk(KERN_INFO "clock_board: Detected %d slot Enterprise system.\n",
arch/sparc/kernel/central.c
167
printk(KERN_ERR "fhc: Cannot allocate struct fhc\n");
arch/sparc/kernel/central.c
178
printk(KERN_ERR "fhc: Cannot map pregs\n");
arch/sparc/kernel/central.c
188
printk(KERN_ERR "fhc: No board# property\n");
arch/sparc/kernel/central.c
209
printk(KERN_ERR "fhc: Could not register LEDS "
arch/sparc/kernel/central.c
227
printk(KERN_INFO "fhc: Board #%d, Version[%x] PartID[%x] Manuf[%x] %s\n",
arch/sparc/kernel/central.c
70
printk(KERN_ERR "clock_board: Cannot allocate struct clock_board\n");
arch/sparc/kernel/central.c
78
printk(KERN_ERR "clock_board: Cannot map clock_freq_regs\n");
arch/sparc/kernel/central.c
86
printk(KERN_ERR "clock_board: Cannot map clock_regs\n");
arch/sparc/kernel/central.c
95
printk(KERN_ERR "clock_board: Cannot map clock_ver_reg\n");
arch/sparc/kernel/chmc.c
409
printk(KERN_ERR PFX "Cannot find /memory node.\n");
arch/sparc/kernel/chmc.c
414
printk(KERN_ERR PFX "Cannot get reg property of /memory node.\n");
arch/sparc/kernel/chmc.c
422
printk(KERN_ERR PFX "Cannot allocate struct jbusmc.\n");
arch/sparc/kernel/chmc.c
431
printk(KERN_ERR PFX "Cannot find portid.\n");
arch/sparc/kernel/chmc.c
439
printk(KERN_ERR PFX "Cannot get memory control register 1.\n");
arch/sparc/kernel/chmc.c
448
printk(KERN_ERR PFX "Cannot map jbusmc regs.\n");
arch/sparc/kernel/chmc.c
455
printk(KERN_ERR PFX "Cannot get memory layout property.\n");
arch/sparc/kernel/chmc.c
459
printk(KERN_ERR PFX "Unexpected memory-layout size %d\n",
arch/sparc/kernel/chmc.c
469
printk(KERN_INFO PFX "UltraSPARC-IIIi memory controller at %pOF\n",
arch/sparc/kernel/chmc.c
715
printk(KERN_ERR PFX "Unexpected memory-layout property "
arch/sparc/kernel/chmc.c
723
printk(KERN_ERR PFX "Could not allocate struct chmc.\n");
arch/sparc/kernel/chmc.c
736
printk(KERN_ERR PFX "Could not map registers.\n");
arch/sparc/kernel/chmc.c
752
printk(KERN_INFO PFX "UltraSPARC-III memory controller at %pOF [%s]\n",
arch/sparc/kernel/cpu.c
308
printk(KERN_ERR "CPU: Unknown chip, impl[0x%x] vers[0x%x]\n",
arch/sparc/kernel/cpu.c
314
printk(KERN_ERR "FPU: Unknown chip, impl[0x%x] vers[0x%x]\n",
arch/sparc/kernel/cpu.c
529
printk(KERN_WARNING "CPU: Unknown sun4v cpu type [%s]\n",
arch/sparc/kernel/devices.c
118
printk(KERN_NOTICE "Booting Linux...\n");
arch/sparc/kernel/ds.c
1015
printk(KERN_ERR "ds-%llu: Data for unknown "
arch/sparc/kernel/ds.c
1118
printk(KERN_WARNING "ds-%llu: Unexpected LDC event %d\n",
arch/sparc/kernel/ds.c
1176
printk(KERN_INFO "%s", version);
arch/sparc/kernel/ds.c
294
printk(KERN_INFO "ds-%llu: Machine description update.\n", dp->id);
arch/sparc/kernel/ds.c
333
printk(KERN_ALERT "ds-%llu: Shutdown request from "
arch/sparc/kernel/ds.c
373
printk(KERN_ALERT "ds-%llu: Panic request from "
arch/sparc/kernel/ds.c
556
printk(KERN_INFO "ds-%llu: Starting cpu %d...\n",
arch/sparc/kernel/ds.c
572
printk(KERN_INFO "ds-%llu: CPU startup failed err=%d\n",
arch/sparc/kernel/ds.c
612
printk(KERN_INFO "ds-%llu: Shutting down cpu %d...\n",
arch/sparc/kernel/ds.c
690
printk(KERN_INFO "ds-%llu: PRI REQ [%llx:%llx], len=%d\n",
arch/sparc/kernel/ds.c
835
printk(KERN_ERR "ds-%llu: var-config [%s:%s] "
arch/sparc/kernel/ds.c
840
printk(KERN_ERR PFX "var-config not registered so "
arch/sparc/kernel/ds.c
883
printk(KERN_ERR "ds-%llu: ds_conn_reset() from %ps\n",
arch/sparc/kernel/ds.c
945
printk(KERN_ERR "ds-%llu: REG ACK for unknown "
arch/sparc/kernel/ds.c
949
printk(KERN_INFO "ds-%llu: Registered %s service.\n",
arch/sparc/kernel/ds.c
957
printk(KERN_ERR "ds-%llu: REG NACK for "
arch/sparc/kernel/ebus.c
82
printk(KERN_CRIT "ebus_dma(%s): DMA error!\n", p->name);
arch/sparc/kernel/idprom.c
50
printk(KERN_WARNING "TYPE: %s\n",
arch/sparc/kernel/idprom.c
53
printk(KERN_WARNING "TYPE: %s\n", sysname);
arch/sparc/kernel/idprom.c
98
printk(KERN_WARNING "Ethernet address: %pM\n", idprom->id_ethaddr);
arch/sparc/kernel/iommu.c
124
printk(KERN_ERR "IOMMU: Error, gfp(dummy_page) failed.\n");
arch/sparc/kernel/iommu.c
135
printk(KERN_ERR "IOMMU: Error, gfp(tsb) failed.\n");
arch/sparc/kernel/iommu.c
178
printk(KERN_WARNING "IOMMU: Ran out of contexts.\n");
arch/sparc/kernel/iommu.c
357
printk(KERN_WARNING "strbuf_flush: ctx flush "
arch/sparc/kernel/iommu.c
391
printk(KERN_WARNING "strbuf_flush: flushflag timeout "
arch/sparc/kernel/iommu.c
506
printk(KERN_INFO "iommu_alloc failed, iommu %p paddr %lx"
arch/sparc/kernel/ioport.c
135
printk("free_io/iounmap: cannot free %lx\n", vaddr);
arch/sparc/kernel/ioport.c
183
printk("ioremap: done with statics, switching to malloc\n");
arch/sparc/kernel/ioport.c
248
printk("%s: cannot occupy 0x%zx", __func__, len);
arch/sparc/kernel/ioport.c
263
printk("%s: cannot free %p\n", __func__, cpu_addr);
arch/sparc/kernel/ioport.c
268
printk("%s: unaligned va %p\n", __func__, cpu_addr);
arch/sparc/kernel/ioport.c
274
printk("%s: region 0x%lx asked 0x%zx\n",
arch/sparc/kernel/ioport.c
288
printk("sbus_set_sbus64: unsupported\n");
arch/sparc/kernel/irq_32.c
144
printk(KERN_ERR "IRQ: Out of virtual IRQs.\n");
arch/sparc/kernel/irq_64.c
456
printk(KERN_ERR "sun4v_intr_settarget(%x,%lu): "
arch/sparc/kernel/irq_64.c
460
printk(KERN_ERR "sun4v_intr_setstate(%x): "
arch/sparc/kernel/irq_64.c
464
printk(KERN_ERR "sun4v_intr_setenabled(%x): err(%d)\n",
arch/sparc/kernel/irq_64.c
477
printk(KERN_ERR "sun4v_intr_settarget(%x,%lu): "
arch/sparc/kernel/irq_64.c
490
printk(KERN_ERR "sun4v_intr_setenabled(%x): "
arch/sparc/kernel/irq_64.c
501
printk(KERN_ERR "sun4v_intr_setstate(%x): "
arch/sparc/kernel/irq_64.c
516
printk(KERN_ERR "sun4v_vintr_set_target(%lx,%lx,%lu): "
arch/sparc/kernel/irq_64.c
522
printk(KERN_ERR "sun4v_vintr_set_state(%lx,%lx,"
arch/sparc/kernel/irq_64.c
528
printk(KERN_ERR "sun4v_vintr_set_state(%lx,%lx,"
arch/sparc/kernel/irq_64.c
545
printk(KERN_ERR "sun4v_vintr_set_target(%lx,%lx,%lu): "
arch/sparc/kernel/irq_64.c
562
printk(KERN_ERR "sun4v_vintr_set_state(%lx,%lx,"
arch/sparc/kernel/irq_64.c
576
printk(KERN_ERR "sun4v_vintr_set_state(%lx,%lx,"
arch/sparc/kernel/ldc.c
1058
printk(KERN_ERR PFX "Alloc of arena map failed, sz=%lu\n", sz);
arch/sparc/kernel/ldc.c
1072
printk(KERN_ERR PFX "Alloc of MTE table failed, "
arch/sparc/kernel/ldc.c
178
printk(KERN_INFO PFX "ID[%lu] " f, lp->id, ## a); \
arch/sparc/kernel/ldc.c
2272
printk(KERN_ERR PFX "ldc_copy: ID[%lu] Bad copy_dir[%d]\n",
arch/sparc/kernel/ldc.c
2279
printk(KERN_ERR PFX "ldc_copy: ID[%lu] Unaligned buffer "
arch/sparc/kernel/ldc.c
2287
printk(KERN_ERR PFX "ldc_copy: ID[%lu] Link down hs_state[%x] "
arch/sparc/kernel/ldc.c
2321
printk(KERN_ERR PFX "ldc_copy: ID[%lu] "
arch/sparc/kernel/ldc.c
2410
printk(KERN_INFO PFX "Could not register LDOM hvapi.\n");
arch/sparc/kernel/ldc.c
2414
printk(KERN_INFO "%s", version);
arch/sparc/kernel/ldc.c
2417
printk(KERN_INFO PFX "Domaining disabled.\n");
arch/sparc/kernel/ldc.c
524
printk(KERN_ERR PFX "ldc_abort: "
arch/sparc/kernel/ldc.c
533
printk(KERN_ERR PFX "ldc_abort: "
arch/sparc/kernel/ldc.c
539
printk(KERN_ERR PFX "ldc_abort: "
arch/sparc/kernel/ldc.c
551
printk(KERN_ERR PFX "ldc_abort: "
arch/sparc/kernel/ldc.c
986
printk(KERN_ERR PFX "Alloc of %s queue failed with "
arch/sparc/kernel/led.c
127
printk(KERN_INFO
arch/sparc/kernel/leon_kernel.c
466
printk(KERN_ERR "No Timer/irqctrl found\n");
arch/sparc/kernel/leon_kernel.c
74
printk(KERN_ERR "LEON EXT IRQ NUMBER BAD: %d\n", eirq);
arch/sparc/kernel/leon_kernel.c
97
printk(KERN_ERR
arch/sparc/kernel/leon_pci_grpci1.c
268
printk(KERN_INFO
arch/sparc/kernel/leon_pci_grpci1.c
289
printk(KERN_INFO
arch/sparc/kernel/leon_pci_grpci1.c
585
printk(KERN_INFO
arch/sparc/kernel/leon_pci_grpci1.c
647
printk(KERN_INFO " PCI INTA..D#: IRQ%d, IRQ%d, IRQ%d, IRQ%d\n",
arch/sparc/kernel/leon_pci_grpci2.c
406
printk(KERN_INFO "grpci2_read_config: [%02x:%02x:%x] ofs=%d val=%x "
arch/sparc/kernel/leon_pci_grpci2.c
427
printk(KERN_INFO "grpci2_write_config: [%02x:%02x:%x] ofs=%d size=%d "
arch/sparc/kernel/leon_pci_grpci2.c
576
printk(KERN_INFO "GRPCI2: Resetting PCI bus\n");
arch/sparc/kernel/leon_pci_grpci2.c
638
printk(KERN_INFO " TGT BAR[%d]: 0x%08x (PCI)-> 0x%08x\n",
arch/sparc/kernel/leon_pci_grpci2.c
653
printk(KERN_ERR "GRPCI2: Jump IRQ happened\n");
arch/sparc/kernel/leon_pci_grpci2.c
669
printk(KERN_ERR "GRPCI2: Parity Error\n");
arch/sparc/kernel/leon_pci_grpci2.c
672
printk(KERN_ERR "GRPCI2: Target Abort\n");
arch/sparc/kernel/leon_pci_grpci2.c
675
printk(KERN_ERR "GRPCI2: Master Abort\n");
arch/sparc/kernel/leon_pci_grpci2.c
678
printk(KERN_ERR "GRPCI2: System Error\n");
arch/sparc/kernel/leon_pci_grpci2.c
695
printk(KERN_ERR "GRPCI2: only one GRPCI2 core supported\n");
arch/sparc/kernel/leon_pci_grpci2.c
700
printk(KERN_ERR "GRPCI2: not enough APB/AHB resources\n");
arch/sparc/kernel/leon_pci_grpci2.c
709
printk(KERN_ERR "GRPCI2: ioremap failed\n");
arch/sparc/kernel/leon_pci_grpci2.c
719
printk(KERN_INFO "GRPCI2: not in host system slot\n");
arch/sparc/kernel/leon_pci_grpci2.c
733
printk(KERN_INFO "GRPCI2: host found at %p, irq%d\n", regs, priv->irq);
arch/sparc/kernel/leon_pci_grpci2.c
771
printk(KERN_INFO
arch/sparc/kernel/leon_pci_grpci2.c
836
printk(KERN_ERR "GRPCI2: ERR IRQ request failed\n");
arch/sparc/kernel/leon_pci_grpci2.c
860
printk(KERN_DEBUG "GRPCI2: ERR VIRQ request failed: %d\n", err);
arch/sparc/kernel/leon_pmc.c
89
printk(KERN_INFO "leon: power management initialized\n");
arch/sparc/kernel/leon_smp.c
114
printk(KERN_INFO "Note: SMP with snooping only works on 4k cache, found %dk(0x%x) on cpu %d, disabling caches\n",
arch/sparc/kernel/leon_smp.c
122
printk(KERN_INFO "Note: You have to enable snooping in the vhdl model cpu %d, disabling caches\n",
arch/sparc/kernel/leon_smp.c
166
printk(KERN_INFO "%d:(%d:%d) cpus mpirq at 0x%x\n", (unsigned int)me,
arch/sparc/kernel/leon_smp.c
197
printk(KERN_INFO "Starting CPU %d : (irqmp: 0x%x)\n", (unsigned int)i,
arch/sparc/kernel/leon_smp.c
213
printk(KERN_INFO "Started CPU %d\n", (unsigned int)i);
arch/sparc/kernel/leon_smp.c
216
printk(KERN_ERR "Processor %d is stuck.\n", i);
arch/sparc/kernel/leon_smp.c
288
printk(KERN_INFO "leon: SMP IPIs at IRQ %d\n", leon_ipi_irq);
arch/sparc/kernel/mdesc.c
1117
printk(KERN_WARNING "Ignoring CPU %d which is "
arch/sparc/kernel/mdesc.c
1330
printk("MDESC: Size is %lu bytes.\n", len);
arch/sparc/kernel/mdesc.c
511
printk(KERN_ERR "MD: mdesc alloc fails\n");
arch/sparc/kernel/mdesc.c
517
printk(KERN_ERR "MD: mdesc reread fails with %lu\n",
arch/sparc/kernel/mdesc.c
770
printk("PLATFORM: banner-name [%s]\n", s);
arch/sparc/kernel/mdesc.c
772
printk("PLATFORM: name [%s]\n", s);
arch/sparc/kernel/mdesc.c
776
printk("PLATFORM: hostid [%08llx]\n", *v);
arch/sparc/kernel/mdesc.c
779
printk("PLATFORM: serial# [%08llx]\n", *v);
arch/sparc/kernel/mdesc.c
781
printk("PLATFORM: stick-frequency [%08llx]\n", *v);
arch/sparc/kernel/mdesc.c
784
printk("PLATFORM: mac-address [%llx]\n", *v);
arch/sparc/kernel/mdesc.c
787
printk("PLATFORM: watchdog-resolution [%llu ms]\n", *v);
arch/sparc/kernel/mdesc.c
790
printk("PLATFORM: watchdog-max-timeout [%llu ms]\n", *v);
arch/sparc/kernel/mdesc.c
794
printk("PLATFORM: max-cpus [%llu]\n", max_cpus);
arch/sparc/kernel/module.c
143
printk(KERN_ERR "module %s: Unknown relocation: 0x%x\n",
arch/sparc/kernel/module.c
36
printk("%s: no symtab found.\n", mod->name);
arch/sparc/kernel/nmi.c
143
printk(KERN_CONT "\n");
arch/sparc/kernel/nmi.c
145
printk(KERN_WARNING
arch/sparc/kernel/nmi.c
149
printk(KERN_WARNING
arch/sparc/kernel/nmi.c
151
printk(KERN_WARNING
arch/sparc/kernel/nmi.c
182
printk(KERN_INFO "Testing NMI watchdog ... ");
arch/sparc/kernel/nmi.c
204
printk("OK.\n");
arch/sparc/kernel/of_device_32.c
326
printk("%pOF reg[%d] -> %llx\n",
arch/sparc/kernel/of_device_32.c
388
printk("%pOF: Could not register of device.\n", dp);
arch/sparc/kernel/of_device_64.c
343
printk(KERN_WARNING "%pOF: Too many regs (%d), "
arch/sparc/kernel/of_device_64.c
403
printk("%pOF reg[%d] -> %llx\n",
arch/sparc/kernel/of_device_64.c
550
printk("%pOF: direct translate %x --> %x\n",
arch/sparc/kernel/of_device_64.c
581
printk("%pOF: Apply [%pOF:%x] imap --> [%pOF:%x]\n",
arch/sparc/kernel/of_device_64.c
598
printk("%pOF: PCI swizzle [%pOF] "
arch/sparc/kernel/of_device_64.c
620
printk("%pOF: Apply IRQ trans [%pOF] %x --> %x\n",
arch/sparc/kernel/of_device_64.c
654
printk(KERN_WARNING "%pOF: Too many irqs (%d), "
arch/sparc/kernel/of_device_64.c
678
printk("%pOF: Could not register of device.\n", dp);
arch/sparc/kernel/of_device_common.c
118
printk("of_device: Cannot handle size cells (%d) > 2.", ns);
arch/sparc/kernel/pci.c
725
printk("PCI: Scanning PBM %pOF\n", node);
arch/sparc/kernel/pci.c
741
printk(KERN_ERR "Failed to create bus for %pOF\n", node);
arch/sparc/kernel/pci_common.c
146
printk("pci_read_config_word: misaligned reg [%x]\n",
arch/sparc/kernel/pci_common.c
156
printk("pci_read_config_dword: misaligned reg [%x]\n",
arch/sparc/kernel/pci_common.c
235
printk("pci_write_config_word: misaligned reg [%x]\n",
arch/sparc/kernel/pci_common.c
244
printk("pci_write_config_dword: misaligned reg [%x]\n",
arch/sparc/kernel/pci_common.c
450
printk("%s: PCI IO %pR offset %llx\n",
arch/sparc/kernel/pci_common.c
453
printk("%s: PCI MEM %pR offset %llx\n",
arch/sparc/kernel/pci_common.c
463
printk("%s: PCI MEM64 %pR offset %llx\n",
arch/sparc/kernel/pci_fire.c
239
printk(KERN_ERR "MSI: Cannot allocate MSI queues (o=%lu).\n",
arch/sparc/kernel/pci_fire.c
436
printk("%s: SUN4U PCIE Bus Module\n", pbm->name);
arch/sparc/kernel/pci_fire.c
473
printk(KERN_ERR PFX "Cannot allocate pci_pbminfo.\n");
arch/sparc/kernel/pci_fire.c
479
printk(KERN_ERR PFX "Cannot allocate PBM iommu.\n");
arch/sparc/kernel/pci_msi.c
417
printk(KERN_INFO "%s: MSI Queue first[%u] num[%u] count[%u] "
arch/sparc/kernel/pci_msi.c
423
printk(KERN_INFO "%s: MSI first[%u] num[%u] mask[0x%x] "
arch/sparc/kernel/pci_msi.c
428
printk(KERN_INFO "%s: MSI addr32[0x%llx:0x%x] "
arch/sparc/kernel/pci_msi.c
433
printk(KERN_INFO "%s: MSI queues at RA [%016lx]\n",
arch/sparc/kernel/pci_msi.c
445
printk(KERN_INFO "%s: No MSI support.\n", pbm->name);
arch/sparc/kernel/pci_msi.c
56
printk(KERN_EMERG "MSI: Get head on msiqid[%lu] gives error %d\n",
arch/sparc/kernel/pci_msi.c
61
printk(KERN_EMERG "MSI: Dequeue head[%lu] from msiqid[%lu] "
arch/sparc/kernel/pci_msi.c
67
printk(KERN_EMERG "MSI: Set head[%lu] on msiqid[%lu] "
arch/sparc/kernel/pci_psycho.c
156
printk("%s: Uncorrectable Error, primary error type[%s]\n",
arch/sparc/kernel/pci_psycho.c
164
printk("%s: bytemask[%04lx] dword_offset[%lx] UPA_MID[%02lx] was_block(%d)\n",
arch/sparc/kernel/pci_psycho.c
170
printk("%s: UE AFAR [%016lx]\n", pbm->name, afar);
arch/sparc/kernel/pci_psycho.c
171
printk("%s: UE Secondary errors [", pbm->name);
arch/sparc/kernel/pci_psycho.c
175
printk("(PIO)");
arch/sparc/kernel/pci_psycho.c
179
printk("(DMA Read)");
arch/sparc/kernel/pci_psycho.c
183
printk("(DMA Write)");
arch/sparc/kernel/pci_psycho.c
186
printk("(none)");
arch/sparc/kernel/pci_psycho.c
187
printk("]\n");
arch/sparc/kernel/pci_psycho.c
235
printk("%s: Correctable Error, primary error type[%s]\n",
arch/sparc/kernel/pci_psycho.c
247
printk("%s: syndrome[%02lx] bytemask[%04lx] dword_offset[%lx] "
arch/sparc/kernel/pci_psycho.c
255
printk("%s: CE AFAR [%016lx]\n", pbm->name, afar);
arch/sparc/kernel/pci_psycho.c
256
printk("%s: CE Secondary errors [", pbm->name);
arch/sparc/kernel/pci_psycho.c
260
printk("(PIO)");
arch/sparc/kernel/pci_psycho.c
264
printk("(DMA Read)");
arch/sparc/kernel/pci_psycho.c
268
printk("(DMA Write)");
arch/sparc/kernel/pci_psycho.c
271
printk("(none)");
arch/sparc/kernel/pci_psycho.c
272
printk("]\n");
arch/sparc/kernel/pci_psycho.c
328
printk(KERN_WARNING "%s: Could not register PCIERR, "
arch/sparc/kernel/pci_psycho.c
524
printk(KERN_ERR PFX "Cannot allocate pci_pbm_info.\n");
arch/sparc/kernel/pci_psycho.c
534
printk(KERN_ERR PFX "Cannot allocate PBM iommu.\n");
arch/sparc/kernel/pci_psycho.c
545
printk(KERN_ERR PFX "No reg property.\n");
arch/sparc/kernel/pci_sabre.c
222
printk("%s: Uncorrectable Error, primary error type[%s%s]\n",
arch/sparc/kernel/pci_sabre.c
230
printk("%s: bytemask[%04lx] dword_offset[%lx] was_block(%d)\n",
arch/sparc/kernel/pci_sabre.c
235
printk("%s: UE AFAR [%016lx]\n", pbm->name, afar);
arch/sparc/kernel/pci_sabre.c
236
printk("%s: UE Secondary errors [", pbm->name);
arch/sparc/kernel/pci_sabre.c
240
printk("(DMA Read)");
arch/sparc/kernel/pci_sabre.c
244
printk("(DMA Write)");
arch/sparc/kernel/pci_sabre.c
248
printk("(Translation Error)");
arch/sparc/kernel/pci_sabre.c
251
printk("(none)");
arch/sparc/kernel/pci_sabre.c
252
printk("]\n");
arch/sparc/kernel/pci_sabre.c
281
printk("%s: Correctable Error, primary error type[%s]\n",
arch/sparc/kernel/pci_sabre.c
291
printk("%s: syndrome[%02lx] bytemask[%04lx] dword_offset[%lx] "
arch/sparc/kernel/pci_sabre.c
298
printk("%s: CE AFAR [%016lx]\n", pbm->name, afar);
arch/sparc/kernel/pci_sabre.c
299
printk("%s: CE Secondary errors [", pbm->name);
arch/sparc/kernel/pci_sabre.c
303
printk("(DMA Read)");
arch/sparc/kernel/pci_sabre.c
307
printk("(DMA Write)");
arch/sparc/kernel/pci_sabre.c
310
printk("(none)");
arch/sparc/kernel/pci_sabre.c
311
printk("]\n");
arch/sparc/kernel/pci_sabre.c
351
printk(KERN_WARNING "%s: Couldn't register UE, err=%d.\n",
arch/sparc/kernel/pci_sabre.c
361
printk(KERN_WARNING "%s: Couldn't register CE, err=%d.\n",
arch/sparc/kernel/pci_sabre.c
366
printk(KERN_WARNING "%s: Couldn't register PCIERR, err=%d.\n",
arch/sparc/kernel/pci_sabre.c
433
printk(KERN_ERR PFX "Multiple controllers unsupported.\n");
arch/sparc/kernel/pci_sabre.c
487
printk(KERN_ERR PFX "Cannot allocate pci_pbm_info.\n");
arch/sparc/kernel/pci_sabre.c
493
printk(KERN_ERR PFX "Cannot allocate PBM iommu.\n");
arch/sparc/kernel/pci_sabre.c
510
printk(KERN_ERR PFX "No reg property\n");
arch/sparc/kernel/pci_sabre.c
539
printk(KERN_ERR PFX "No virtual-dma property\n");
arch/sparc/kernel/pci_sabre.c
559
printk(KERN_ERR PFX "Strange virtual-dma size.\n");
arch/sparc/kernel/pci_schizo.c
1168
printk(KERN_ERR PFX "Strange virtual-dma size.\n");
arch/sparc/kernel/pci_schizo.c
1204
printk(KERN_ERR PFX "iommu_table_init() fails with %d\n", err);
arch/sparc/kernel/pci_schizo.c
1376
printk("%s: %s PCI Bus Module ver[%x:%x]\n",
arch/sparc/kernel/pci_schizo.c
1431
printk(KERN_ERR PFX "Cannot allocate pci_pbm_info.\n");
arch/sparc/kernel/pci_schizo.c
1439
printk(KERN_ERR PFX "Cannot allocate PBM A iommu.\n");
arch/sparc/kernel/pci_schizo.c
185
printk("%s: STC_ERR(%d)[wr(%d)rd(%d)]\n",
arch/sparc/kernel/pci_schizo.c
195
printk("%s: STC_TAG(%d)[PA(%016lx)VA(%08lx)V(%d)R(%d)]\n",
arch/sparc/kernel/pci_schizo.c
204
printk("%s: STC_LINE(%d)[LIDX(%lx)SP(%lx)LADDR(%lx)EP(%lx)"
arch/sparc/kernel/pci_schizo.c
274
printk("%s: IOMMU Error, type[%s]\n",
arch/sparc/kernel/pci_schizo.c
329
printk("%s: IOMMU TAG(%d)[error(%s) ctx(%x) wr(%d) str(%d) "
arch/sparc/kernel/pci_schizo.c
337
printk("%s: IOMMU DATA(%d)[valid(%d) cache(%d) ppg(%016lx)]\n",
arch/sparc/kernel/pci_schizo.c
405
printk("%s: Uncorrectable Error, primary error type[%s]\n",
arch/sparc/kernel/pci_schizo.c
413
printk("%s: bytemask[%04lx] qword_offset[%lx] SAFARI_AID[%02lx]\n",
arch/sparc/kernel/pci_schizo.c
418
printk("%s: partial[%d] owned_in[%d] mtag[%lx] mtag_synd[%lx] ecc_sync[%lx]\n",
arch/sparc/kernel/pci_schizo.c
425
printk("%s: UE AFAR [%016lx]\n", pbm->name, afar);
arch/sparc/kernel/pci_schizo.c
426
printk("%s: UE Secondary errors [", pbm->name);
arch/sparc/kernel/pci_schizo.c
430
printk("(PIO)");
arch/sparc/kernel/pci_schizo.c
434
printk("(DMA)");
arch/sparc/kernel/pci_schizo.c
437
printk("(none)");
arch/sparc/kernel/pci_schizo.c
438
printk("]\n");
arch/sparc/kernel/pci_schizo.c
493
printk("%s: Correctable Error, primary error type[%s]\n",
arch/sparc/kernel/pci_schizo.c
505
printk("%s: bytemask[%04lx] qword_offset[%lx] SAFARI_AID[%02lx]\n",
arch/sparc/kernel/pci_schizo.c
510
printk("%s: partial[%d] owned_in[%d] mtag[%lx] mtag_synd[%lx] ecc_sync[%lx]\n",
arch/sparc/kernel/pci_schizo.c
517
printk("%s: CE AFAR [%016lx]\n", pbm->name, afar);
arch/sparc/kernel/pci_schizo.c
518
printk("%s: CE Secondary errors [", pbm->name);
arch/sparc/kernel/pci_schizo.c
522
printk("(PIO)");
arch/sparc/kernel/pci_schizo.c
526
printk("(DMA)");
arch/sparc/kernel/pci_schizo.c
529
printk("(none)");
arch/sparc/kernel/pci_schizo.c
530
printk("]\n");
arch/sparc/kernel/pci_schizo.c
606
printk("%s: Bus unusable error asserted.\n",
arch/sparc/kernel/pci_schizo.c
609
printk("%s: PCI TRDY# timeout error asserted.\n",
arch/sparc/kernel/pci_schizo.c
612
printk("%s: PCI excessive retry error asserted.\n",
arch/sparc/kernel/pci_schizo.c
615
printk("%s: PCI discard timeout error asserted.\n",
arch/sparc/kernel/pci_schizo.c
618
printk("%s: PCI streaming byte hole error asserted.\n",
arch/sparc/kernel/pci_schizo.c
621
printk("%s: PCI SERR signal asserted.\n",
arch/sparc/kernel/pci_schizo.c
631
printk("%s: PCI bus error, PCI_STATUS[%04x]\n",
arch/sparc/kernel/pci_schizo.c
668
printk("%s: PCI Error, primary error type[%s]\n",
arch/sparc/kernel/pci_schizo.c
682
printk("%s: bytemask[%04lx] was_block(%d) space(%s)\n",
arch/sparc/kernel/pci_schizo.c
692
printk("%s: PCI AFAR [%016lx]\n",
arch/sparc/kernel/pci_schizo.c
694
printk("%s: PCI Secondary errors [",
arch/sparc/kernel/pci_schizo.c
699
printk("(Master Abort)");
arch/sparc/kernel/pci_schizo.c
703
printk("(Target Abort)");
arch/sparc/kernel/pci_schizo.c
707
printk("(Excessive Retries)");
arch/sparc/kernel/pci_schizo.c
711
printk("(Parity Error)");
arch/sparc/kernel/pci_schizo.c
715
printk("(Timeout)");
arch/sparc/kernel/pci_schizo.c
719
printk("(Bus Unusable)");
arch/sparc/kernel/pci_schizo.c
722
printk("(none)");
arch/sparc/kernel/pci_schizo.c
723
printk("]\n");
arch/sparc/kernel/pci_schizo.c
803
printk("%s: Unexpected Safari/JBUS error interrupt, errlog[%016llx]\n",
arch/sparc/kernel/pci_schizo.c
809
printk("%s: Safari/JBUS interrupt, UNMAPPED error, interrogating IOMMUs.\n",
arch/sparc/kernel/pci_schizo.c
869
printk(KERN_WARNING "%s: Could not register UE, "
arch/sparc/kernel/pci_schizo.c
876
printk(KERN_WARNING "%s: Could not register CE, "
arch/sparc/kernel/pci_schizo.c
888
printk(KERN_WARNING "%s: Could not register PCIERR, "
arch/sparc/kernel/pci_schizo.c
895
printk(KERN_WARNING "%s: Could not register SERR, "
arch/sparc/kernel/pci_schizo.c
964
printk(KERN_WARNING "%s: Could not register UE, "
arch/sparc/kernel/pci_schizo.c
971
printk(KERN_WARNING "%s: Could not register CE, "
arch/sparc/kernel/pci_schizo.c
983
printk(KERN_WARNING "%s: Could not register PCIERR, "
arch/sparc/kernel/pci_schizo.c
990
printk(KERN_WARNING "%s: Could not register SERR, "
arch/sparc/kernel/pci_sun4v.c
1074
printk(KERN_ERR "MSI: Cannot allocate MSI queues (o=%lu).\n",
arch/sparc/kernel/pci_sun4v.c
1089
printk(KERN_ERR "MSI: msiq register fails (err=%lu)\n",
arch/sparc/kernel/pci_sun4v.c
1098
printk(KERN_ERR "MSI: Cannot read msiq (err=%lu)\n",
arch/sparc/kernel/pci_sun4v.c
1103
printk(KERN_ERR "MSI: Bogus qconf "
arch/sparc/kernel/pci_sun4v.c
1197
printk("%s: SUN4V PCI Bus Module\n", pbm->name);
arch/sparc/kernel/pci_sun4v.c
1198
printk("%s: On NUMA node %d\n", pbm->name, pbm->numa_node);
arch/sparc/kernel/pci_sun4v.c
1279
printk(KERN_ERR PFX "Could not find config registers\n");
arch/sparc/kernel/pci_sun4v.c
1299
printk(KERN_ERR PFX "Could not allocate pci_pbm_info\n");
arch/sparc/kernel/pci_sun4v.c
1305
printk(KERN_ERR PFX "Could not allocate pbm iommu\n");
arch/sparc/kernel/pci_sun4v.c
888
printk(KERN_ERR PFX "Strange virtual-dma[%08x:%08x].\n",
arch/sparc/kernel/pci_sun4v.c
909
printk(KERN_ERR PFX "Error, kmalloc(arena.map) failed.\n");
arch/sparc/kernel/pci_sun4v.c
918
printk("%s: Imported %lu TSB entries from OBP\n",
arch/sparc/kernel/pcic.c
384
printk("PCIC: System %s is unknown, cannot route interrupts\n",
arch/sparc/kernel/pcic.c
729
printk("Aiee, NMI pend 0x%x pc 0x%x spec %d, hanging\n",
arch/sparc/kernel/pcic.c
804
printk("PCIC: unimplemented code: FILE=%s LINE=%d", __FILE__, __LINE__);
arch/sparc/kernel/pmc.c
62
printk(KERN_ERR "%s: unable to map registers\n", PMC_DEVNAME);
arch/sparc/kernel/pmc.c
71
printk(KERN_INFO "%s: power management initialized\n", PMC_DEVNAME);
arch/sparc/kernel/power.c
45
printk(KERN_INFO "%pOFn: Control reg at %llx\n",
arch/sparc/kernel/power.c
51
printk(KERN_ERR "power: Cannot setup IRQ handler.\n");
arch/sparc/kernel/process_32.c
122
printk("PSR: %08lx PC: %08lx NPC: %08lx Y: %08lx %s\n",
arch/sparc/kernel/process_32.c
124
printk("PC: <%pS>\n", (void *) r->pc);
arch/sparc/kernel/process_32.c
125
printk("%%G: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
arch/sparc/kernel/process_32.c
128
printk("%%O: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
arch/sparc/kernel/process_32.c
131
printk("RPC: <%pS>\n", (void *) r->u_regs[15]);
arch/sparc/kernel/process_32.c
133
printk("%%L: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
arch/sparc/kernel/process_32.c
136
printk("%%I: %08lx %08lx %08lx %08lx %08lx %08lx %08lx %08lx\n",
arch/sparc/kernel/process_32.c
167
printk("%s[%08lx : ", loglvl, pc);
arch/sparc/kernel/process_32.c
168
printk("%s%pS ] ", loglvl, (void *) pc);
arch/sparc/kernel/process_32.c
171
printk("%s\n", loglvl);
arch/sparc/kernel/process_32.c
334
printk("clone: parent stack:\n");
arch/sparc/kernel/process_32.c
343
printk("clone: child stack:\n");
arch/sparc/kernel/process_64.c
117
printk("l0: %08x l1: %08x l2: %08x l3: %08x "
arch/sparc/kernel/process_64.c
121
printk("i0: %08x i1: %08x i2: %08x i3: %08x "
arch/sparc/kernel/process_64.c
152
printk("l0: %016lx l1: %016lx l2: %016lx l3: %016lx\n",
arch/sparc/kernel/process_64.c
154
printk("l4: %016lx l5: %016lx l6: %016lx l7: %016lx\n",
arch/sparc/kernel/process_64.c
156
printk("i0: %016lx i1: %016lx i2: %016lx i3: %016lx\n",
arch/sparc/kernel/process_64.c
158
printk("i4: %016lx i5: %016lx i6: %016lx i7: %016lx\n",
arch/sparc/kernel/process_64.c
161
printk("I7: <%pS>\n", (void *) rwk->ins[7]);
arch/sparc/kernel/process_64.c
168
printk("TSTATE: %016lx TPC: %016lx TNPC: %016lx Y: %08x %s\n", regs->tstate,
arch/sparc/kernel/process_64.c
170
printk("TPC: <%pS>\n", (void *) regs->tpc);
arch/sparc/kernel/process_64.c
171
printk("g0: %016lx g1: %016lx g2: %016lx g3: %016lx\n",
arch/sparc/kernel/process_64.c
174
printk("g4: %016lx g5: %016lx g6: %016lx g7: %016lx\n",
arch/sparc/kernel/process_64.c
177
printk("o0: %016lx o1: %016lx o2: %016lx o3: %016lx\n",
arch/sparc/kernel/process_64.c
180
printk("o4: %016lx o5: %016lx sp: %016lx ret_pc: %016lx\n",
arch/sparc/kernel/process_64.c
183
printk("RPC: <%pS>\n", (void *) regs->u_regs[15]);
arch/sparc/kernel/process_64.c
271
printk("%c CPU[%3d]: TSTATE[%016lx] TPC[%016lx] TNPC[%016lx] TASK[%s:%d]\n",
arch/sparc/kernel/process_64.c
278
printk(" TPC[%pS] O7[%pS] I7[%pS] RPC[%pS]\n",
arch/sparc/kernel/process_64.c
284
printk(" TPC[%lx] O7[%lx] I7[%lx] RPC[%lx]\n",
arch/sparc/kernel/process_64.c
360
printk("%c CPU[%3d]: PCR[%08lx:%08lx:%08lx:%08lx] PIC[%08lx:%08lx:%08lx:%08lx]\n",
arch/sparc/kernel/prom_32.c
315
printk(msg, of_console_path);
arch/sparc/kernel/prom_64.c
458
printk(KERN_WARNING "Ignoring CPU %d which is "
arch/sparc/kernel/prom_64.c
636
printk(msg, of_console_path);
arch/sparc/kernel/prom_irqtrans.c
351
printk("tomatillo_wsync_handler: DMA won't sync [%llx:%llx]\n",
arch/sparc/kernel/psycho_common.c
100
printk(KERN_ERR "%s: STC_TAG(%d)[PA(%016llx)VA(%08llx)"
arch/sparc/kernel/psycho_common.c
108
printk(KERN_ERR "%s: STC_LINE(%d)[LIDX(%llx)SP(%llx)"
arch/sparc/kernel/psycho_common.c
184
printk(KERN_ERR "%s: IOMMU TAG(%d)[error(%s) wr(%d) "
arch/sparc/kernel/psycho_common.c
191
printk(KERN_ERR "%s: IOMMU DATA(%d)[valid(%d) cache(%d) "
arch/sparc/kernel/psycho_common.c
235
printk(KERN_ERR "%s: IOMMU Error, type[%s]\n",
arch/sparc/kernel/psycho_common.c
268
printk(KERN_ERR "%s: PCI streaming byte hole "
arch/sparc/kernel/psycho_common.c
271
printk(KERN_ERR "%s: PCI SERR signal asserted.\n",
arch/sparc/kernel/psycho_common.c
283
printk(KERN_ERR "%s: PCI bus error, PCI_STATUS[%04x]\n",
arch/sparc/kernel/psycho_common.c
322
printk(KERN_ERR "%s: PCI Error, primary error type[%s]\n",
arch/sparc/kernel/psycho_common.c
332
printk(KERN_ERR "%s: bytemask[%04llx] UPA_MID[%02llx] was_block(%d)\n",
arch/sparc/kernel/psycho_common.c
337
printk(KERN_ERR "%s: PCI AFAR [%016llx]\n", pbm->name, afar);
arch/sparc/kernel/psycho_common.c
338
printk(KERN_ERR "%s: PCI Secondary errors [", pbm->name);
arch/sparc/kernel/psycho_common.c
342
printk("(Master Abort)");
arch/sparc/kernel/psycho_common.c
346
printk("(Target Abort)");
arch/sparc/kernel/psycho_common.c
350
printk("(Excessive Retries)");
arch/sparc/kernel/psycho_common.c
354
printk("(Parity Error)");
arch/sparc/kernel/psycho_common.c
357
printk("(none)");
arch/sparc/kernel/psycho_common.c
358
printk("]\n");
arch/sparc/kernel/psycho_common.c
470
printk(KERN_INFO "%s: %s PCI Bus Module ver[%x:%x]\n",
arch/sparc/kernel/psycho_common.c
89
printk(KERN_ERR "%s: STC_ERR(%d)[wr(%d)"
arch/sparc/kernel/sbus.c
297
printk("SYSIO[%x]: Uncorrectable ECC Error, primary error type[%s]\n",
arch/sparc/kernel/sbus.c
305
printk("SYSIO[%x]: DOFF[%lx] SIZE[%lx] MID[%lx]\n",
arch/sparc/kernel/sbus.c
310
printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar);
arch/sparc/kernel/sbus.c
311
printk("SYSIO[%x]: Secondary UE errors [", portid);
arch/sparc/kernel/sbus.c
315
printk("(PIO)");
arch/sparc/kernel/sbus.c
319
printk("(DVMA Read)");
arch/sparc/kernel/sbus.c
323
printk("(DVMA Write)");
arch/sparc/kernel/sbus.c
326
printk("(none)");
arch/sparc/kernel/sbus.c
327
printk("]\n");
arch/sparc/kernel/sbus.c
370
printk("SYSIO[%x]: Correctable ECC Error, primary error type[%s]\n",
arch/sparc/kernel/sbus.c
382
printk("SYSIO[%x]: DOFF[%lx] ECC Syndrome[%lx] Size[%lx] MID[%lx]\n",
arch/sparc/kernel/sbus.c
388
printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar);
arch/sparc/kernel/sbus.c
390
printk("SYSIO[%x]: Secondary CE errors [", portid);
arch/sparc/kernel/sbus.c
394
printk("(PIO)");
arch/sparc/kernel/sbus.c
398
printk("(DVMA Read)");
arch/sparc/kernel/sbus.c
402
printk("(DVMA Write)");
arch/sparc/kernel/sbus.c
405
printk("(none)");
arch/sparc/kernel/sbus.c
406
printk("]\n");
arch/sparc/kernel/sbus.c
449
printk("SYSIO[%x]: SBUS Error, primary error type[%s] read(%d)\n",
arch/sparc/kernel/sbus.c
458
printk("SYSIO[%x]: size[%lx] MID[%lx]\n",
arch/sparc/kernel/sbus.c
462
printk("SYSIO[%x]: AFAR[%016lx]\n", portid, afar);
arch/sparc/kernel/sbus.c
463
printk("SYSIO[%x]: Secondary SBUS errors [", portid);
arch/sparc/kernel/sbus.c
467
printk("(Late PIO Error)");
arch/sparc/kernel/sbus.c
471
printk("(Time Out)");
arch/sparc/kernel/sbus.c
475
printk("(Error Ack)");
arch/sparc/kernel/sbus.c
478
printk("(none)");
arch/sparc/kernel/sbus.c
479
printk("]\n");
arch/sparc/kernel/sbus.c
595
printk(KERN_INFO "SYSIO: UPA portID %x, at %016lx\n",
arch/sparc/kernel/sbus.c
72
printk(KERN_ERR "sbus_set_sbus64: Cannot find regs for %pOF\n",
arch/sparc/kernel/setup_32.c
130
printk("Unknown boot switch (-%c)\n", c);
arch/sparc/kernel/setup_32.c
348
printk("Booted under KADB. Syncing trap table.\n");
arch/sparc/kernel/setup_32.c
367
printk("\n");
arch/sparc/kernel/setup_64.c
106
printk("BOOT: Ignoring P-Cache force option.\n");
arch/sparc/kernel/setup_64.c
115
printk("Unknown boot switch (-%c)\n", c);
arch/sparc/kernel/setup_64.c
431
printk(KERN_INFO "CPU CAPS: [");
arch/sparc/kernel/setup_64.c
432
printk(KERN_CONT "%s%s",
arch/sparc/kernel/setup_64.c
435
printk(KERN_CONT "]\n");
arch/sparc/kernel/setup_64.c
466
printk(KERN_CONT "]\n");
arch/sparc/kernel/smp_32.c
101
printk("SUN4E\n");
arch/sparc/kernel/smp_32.c
105
printk("SUN4U\n");
arch/sparc/kernel/smp_32.c
109
printk("UNKNOWN!\n");
arch/sparc/kernel/smp_32.c
117
printk("CPU[%d]: Returns from cpu_idle!\n", smp_processor_id());
arch/sparc/kernel/smp_32.c
181
printk("Entering SMP Mode...\n");
arch/sparc/kernel/smp_32.c
190
printk("Warning: NR_CPUS is too low to start all cpus\n");
arch/sparc/kernel/smp_32.c
205
printk("SUN4E\n");
arch/sparc/kernel/smp_32.c
209
printk("SUN4U\n");
arch/sparc/kernel/smp_32.c
213
printk("UNKNOWN!\n");
arch/sparc/kernel/smp_32.c
246
printk("boot cpu id != 0, this could work but is untested\n");
arch/sparc/kernel/smp_32.c
268
printk("SUN4E\n");
arch/sparc/kernel/smp_32.c
272
printk("SUN4U\n");
arch/sparc/kernel/smp_32.c
276
printk("UNKNOWN!\n");
arch/sparc/kernel/smp_32.c
70
printk(KERN_NOTICE "No MID found for CPU%d at node 0x%08x", id, cpu_node);
arch/sparc/kernel/smp_32.c
86
printk("Total of %d processors activated (%lu.%02lu BogoMIPS).\n",
arch/sparc/kernel/smp_64.c
1151
printk("CPU[%d]: Sending penguins to jail...",
arch/sparc/kernel/smp_64.c
1160
printk("done\n");
arch/sparc/kernel/smp_64.c
1169
printk("CPU[%d]: Giving pardon to "
arch/sparc/kernel/smp_64.c
1369
printk(KERN_ERR "CPU %u didn't die...\n", cpu);
arch/sparc/kernel/smp_64.c
1383
printk(KERN_ERR "sun4v_cpu_stop() fails err=%lu\n",
arch/sparc/kernel/smp_64.c
148
printk("CPU[%d]: Returns from cpu_idle!\n", smp_processor_id());
arch/sparc/kernel/smp_64.c
1508
printk(KERN_ERR "sun4v_cpu_stop() "
arch/sparc/kernel/smp_64.c
246
printk("rt=%5ld master=%5ld diff=%5ld adjlat=%5ld\n",
arch/sparc/kernel/smp_64.c
250
printk(KERN_INFO "CPU %d: synchronized TICK with master CPU "
arch/sparc/kernel/smp_64.c
302
printk(KERN_ERR "ldom_startcpu_cpuid: Cannot allocate "
arch/sparc/kernel/smp_64.c
334
printk(KERN_ERR "ldom_startcpu_cpuid: sun4v_cpu_start() "
arch/sparc/kernel/smp_64.c
383
printk("Processor %d is stuck.\n", cpu);
arch/sparc/kernel/smp_64.c
451
printk("CPU[%d]: mondo stuckage result[%016llx]\n",
arch/sparc/kernel/smp_64.c
586
printk("CPU[%d]: mondo stuckage result[%016llx]\n",
arch/sparc/kernel/sstate.c
32
printk(KERN_WARNING "SSTATE: Failed to set soft-state to "
arch/sparc/kernel/starfire.c
99
printk("starfire_translate: Are you kidding me?\n");
arch/sparc/kernel/sun4d_irq.c
264
printk(KERN_ERR "All sbus IRQs directed to CPU%d\n", cpuid);
arch/sparc/kernel/sun4d_irq.c
364
printk(KERN_ERR "%pOF: Error, parent is not %s.\n",
arch/sparc/kernel/sun4d_irq.c
371
printk(KERN_ERR "%pOF: Error, lacks board# property.\n",
arch/sparc/kernel/sun4d_irq.c
501
printk(KERN_ERR "Clearing pending IRQs %08x on SBI %d\n",
arch/sparc/kernel/sun4d_smp.c
140
printk(KERN_INFO "Starting CPU %d at %p\n", i, entry);
arch/sparc/kernel/sun4d_smp.c
145
printk(KERN_INFO "prom_startcpu returned :)\n");
arch/sparc/kernel/sun4d_smp.c
155
printk(KERN_ERR "Processor %d is stuck.\n", i);
arch/sparc/kernel/sun4d_smp.c
198
printk(KERN_INFO "smp4d: setup IPI at IRQ %d\n", SUN4D_IPI_IRQ);
arch/sparc/kernel/sun4m_irq.c
315
printk(KERN_ERR "Aieee: sun4m NMI received!\n");
arch/sparc/kernel/sun4m_irq.c
322
printk(KERN_ERR "afsr=%08lx afar=%08lx\n", afsr, afar);
arch/sparc/kernel/sun4m_irq.c
324
printk(KERN_ERR "si=%08lx\n", si);
arch/sparc/kernel/sun4m_irq.c
326
printk(KERN_ERR "Module async error\n");
arch/sparc/kernel/sun4m_irq.c
328
printk(KERN_ERR "MBus/SBus async error\n");
arch/sparc/kernel/sun4m_irq.c
330
printk(KERN_ERR "ECC memory error\n");
arch/sparc/kernel/sun4m_irq.c
332
printk(KERN_ERR "VME async error\n");
arch/sparc/kernel/sun4m_irq.c
333
printk(KERN_ERR "you lose buddy boy...\n");
arch/sparc/kernel/sun4m_irq.c
366
printk(KERN_ERR "sun4m_init_timers: No 'counter' node.\n");
arch/sparc/kernel/sun4m_irq.c
373
printk(KERN_ERR "sun4m_init_timers: No 'address' prop.\n");
arch/sparc/kernel/sun4m_irq.c
405
printk(KERN_ERR "sun4m_init_timers: Register IRQ error %d.\n",
arch/sparc/kernel/sun4m_irq.c
442
printk(KERN_ERR "sun4m_init_IRQ: No 'interrupt' node.\n");
arch/sparc/kernel/sun4m_irq.c
449
printk(KERN_ERR "sun4m_init_IRQ: No 'address' prop.\n");
arch/sparc/kernel/sun4m_smp.c
101
printk(KERN_INFO "Starting CPU %d at %p\n", i, entry);
arch/sparc/kernel/sun4m_smp.c
113
printk(KERN_ERR "Processor %d is stuck.\n", i);
arch/sparc/kernel/sys_sparc_32.c
145
printk ("%s[%d]: Unimplemented SPARC system call %d\n",
arch/sparc/kernel/sys_sparc_32.c
160
printk ("TRAP: Entering kernel PC=%x, nPC=%x\n", regs->pc, regs->npc);
arch/sparc/kernel/sys_sparc_32.c
165
printk ("TRAP: Returning to space: PC=%x nPC=%x\n", regs->pc, regs->npc);
arch/sparc/kernel/sys_sparc_64.c
513
printk ("Unimplemented SPARC system call %ld\n",regs->u_regs[1]);
arch/sparc/kernel/sys_sparc_64.c
532
printk ("TRAP: Entering kernel PC=%lx, nPC=%lx\n", regs->tpc, regs->tnpc);
arch/sparc/kernel/sys_sparc_64.c
536
printk ("TRAP: Returning to space: PC=%lx nPC=%lx\n", regs->tpc, regs->tnpc);
arch/sparc/kernel/time_32.c
297
printk(KERN_ERR "Registering RTC device failed\n");
arch/sparc/kernel/time_64.c
449
printk(KERN_INFO "%pOF: RTC regs at 0x%llx\n",
arch/sparc/kernel/time_64.c
505
printk(KERN_INFO "%pOF: BQ4802 regs at 0x%llx\n",
arch/sparc/kernel/time_64.c
570
printk(KERN_INFO "%pOF: Mostek regs at 0x%llx\n",
arch/sparc/kernel/time_64.c
733
printk(KERN_WARNING
arch/sparc/kernel/time_64.c
863
printk("clocksource: mult[%x] shift[%d]\n",
arch/sparc/kernel/time_64.c
876
printk("clockevent: mult[%x] shift[%d]\n",
arch/sparc/kernel/traps_32.c
114
printk("Ill instr. at pc=%08lx instruction is %08lx\n",
arch/sparc/kernel/traps_32.c
135
printk("KERNEL MNA at pc %08lx npc %08lx called by %08lx\n", pc, npc,
arch/sparc/kernel/traps_32.c
143
printk ("do_MNA!\n");
arch/sparc/kernel/traps_32.c
228
printk("Hmm, FP exception, fsr was %016lx\n", fpt->thread.fsr);
arch/sparc/kernel/traps_32.c
235
printk("IEEE_754_exception\n");
arch/sparc/kernel/traps_32.c
244
printk("sequence_error (OS bug...)\n");
arch/sparc/kernel/traps_32.c
247
printk("hardware_error (uhoh!)\n");
arch/sparc/kernel/traps_32.c
250
printk("invalid_fp_register (user error)\n");
arch/sparc/kernel/traps_32.c
268
printk("WARNING: FPU exception from kernel mode. at pc=%08lx\n",
arch/sparc/kernel/traps_32.c
314
printk("Watchpoint detected at PC %08lx NPC %08lx PSR %08lx\n",
arch/sparc/kernel/traps_32.c
326
printk("Register Access Exception at PC %08lx NPC %08lx PSR %08lx\n",
arch/sparc/kernel/traps_32.c
342
printk("Co-Processor Exception at PC %08lx NPC %08lx PSR %08lx\n",
arch/sparc/kernel/traps_32.c
358
printk("kernel BUG at %s:%d!\n", file, line);
arch/sparc/kernel/traps_32.c
44
printk("%c%08lx%c",i?' ':'<',pc[i],i?' ':'>');
arch/sparc/kernel/traps_32.c
45
printk("\n");
arch/sparc/kernel/traps_32.c
57
printk(
arch/sparc/kernel/traps_32.c
63
printk("%s(%d): %s [#%d]\n", current->comm, task_pid_nr(current), str, ++die_counter);
arch/sparc/kernel/traps_32.c
83
printk("Caller[%08lx]: %pS\n", rw->ins[7],
arch/sparc/kernel/traps_32.c
88
printk("Instruction DUMP:");
arch/sparc/kernel/traps_32.c
97
printk("Unimplemented Sparc TRAP, type = %02lx\n", type);
arch/sparc/kernel/traps_64.c
1175
printk("%s" "ERROR(%d): Cheetah error trap taken afsr[%016lx] afar[%016lx] TL1(%d)\n",
arch/sparc/kernel/traps_64.c
1179
printk("%s" "ERROR(%d): TPC[%lx] TNPC[%lx] O7[%lx] TSTATE[%lx]\n",
arch/sparc/kernel/traps_64.c
1182
printk("%s" "ERROR(%d): ",
arch/sparc/kernel/traps_64.c
1184
printk("TPC<%pS>\n", (void *) regs->tpc);
arch/sparc/kernel/traps_64.c
1185
printk("%s" "ERROR(%d): M_SYND(%lx), E_SYND(%lx)%s%s\n",
arch/sparc/kernel/traps_64.c
1192
printk("%s" "ERROR(%d): Highest priority error (%016lx) \"%s\"\n",
arch/sparc/kernel/traps_64.c
1212
printk("%s" "ERROR(%d): AFAR E-syndrome [%s]\n",
arch/sparc/kernel/traps_64.c
1223
printk("%s" "ERROR(%d): AFAR M-syndrome [%s]\n",
arch/sparc/kernel/traps_64.c
1229
printk("%s" "ERROR(%d): D-cache idx[%x] tag[%016llx] utag[%016llx] stag[%016llx]\n",
arch/sparc/kernel/traps_64.c
1235
printk("%s" "ERROR(%d): D-cache data0[%016llx] data1[%016llx] data2[%016llx] data3[%016llx]\n",
arch/sparc/kernel/traps_64.c
1241
printk("%s" "ERROR(%d): I-cache idx[%x] tag[%016llx] utag[%016llx] stag[%016llx] "
arch/sparc/kernel/traps_64.c
1250
printk("%s" "ERROR(%d): I-cache INSN0[%016llx] INSN1[%016llx] INSN2[%016llx] INSN3[%016llx]\n",
arch/sparc/kernel/traps_64.c
1256
printk("%s" "ERROR(%d): I-cache INSN4[%016llx] INSN5[%016llx] INSN6[%016llx] INSN7[%016llx]\n",
arch/sparc/kernel/traps_64.c
1262
printk("%s" "ERROR(%d): E-cache idx[%x] tag[%016llx]\n",
arch/sparc/kernel/traps_64.c
1265
printk("%s" "ERROR(%d): E-cache data0[%016llx] data1[%016llx] data2[%016llx] data3[%016llx]\n",
arch/sparc/kernel/traps_64.c
1276
printk("%s" "ERROR: Multiple-error (%016lx) \"%s\"\n",
arch/sparc/kernel/traps_64.c
1284
printk(KERN_CRIT "ERROR: This condition is not recoverable.\n");
arch/sparc/kernel/traps_64.c
133
printk("kernel BUG at %s:%d!\n", file, line);
arch/sparc/kernel/traps_64.c
1787
printk(KERN_EMERG "CPU[%d]: Cheetah+ %c-cache parity error at TPC[%016lx]\n",
arch/sparc/kernel/traps_64.c
1791
printk(KERN_EMERG "TPC<%pS>\n", (void *) regs->tpc);
arch/sparc/kernel/traps_64.c
1795
printk(KERN_WARNING "CPU[%d]: Cheetah+ %c-cache parity error at TPC[%016lx]\n",
arch/sparc/kernel/traps_64.c
1799
printk(KERN_WARNING "TPC<%pS>\n", (void *) regs->tpc);
arch/sparc/kernel/traps_64.c
1961
printk("%s: insn effective address [0x%016llx]\n",
arch/sparc/kernel/traps_64.c
197
printk("spitfire_insn_access_exception: SFSR[%016lx] "
arch/sparc/kernel/traps_64.c
1972
printk("%s: Reporting on cpu %d\n", pfx, cpu);
arch/sparc/kernel/traps_64.c
1973
printk("%s: TPC [0x%016lx] <%pS>\n",
arch/sparc/kernel/traps_64.c
1976
printk("%s: RAW [%016llx:%016llx:%016llx:%016llx\n",
arch/sparc/kernel/traps_64.c
1978
printk("%s: %016llx:%016llx:%016llx:%016llx]\n",
arch/sparc/kernel/traps_64.c
1981
printk("%s: handle [0x%016llx] stick [0x%016llx]\n",
arch/sparc/kernel/traps_64.c
1984
printk("%s: type [%s]\n", pfx, sun4v_err_type_to_str(ent->err_type));
arch/sparc/kernel/traps_64.c
1987
printk("%s: attrs [0x%08x] < ", pfx, attrs);
arch/sparc/kernel/traps_64.c
1997
printk("%s: raddr [0x%016llx]\n", pfx, ent->err_raddr);
arch/sparc/kernel/traps_64.c
2004
printk("%s: size [0x%x]\n", pfx, ent->err_size);
arch/sparc/kernel/traps_64.c
2010
printk("%s: cpu[%u]\n", pfx, ent->err_cpu);
arch/sparc/kernel/traps_64.c
2013
printk("%s: asi [0x%02x]\n", pfx, ent->err_asi);
arch/sparc/kernel/traps_64.c
2019
printk("%s: reg [0x%04x]\n",
arch/sparc/kernel/traps_64.c
2027
printk("%s: Queue overflowed %d times.\n",
arch/sparc/kernel/traps_64.c
2267
printk(KERN_EMERG "SUN4V-ITLB: Error at TPC[%lx], tl %d\n",
arch/sparc/kernel/traps_64.c
2269
printk(KERN_EMERG "SUN4V-ITLB: TPC<%pS>\n", (void *) regs->tpc);
arch/sparc/kernel/traps_64.c
2270
printk(KERN_EMERG "SUN4V-ITLB: O7[%lx]\n", regs->u_regs[UREG_I7]);
arch/sparc/kernel/traps_64.c
2271
printk(KERN_EMERG "SUN4V-ITLB: O7<%pS>\n",
arch/sparc/kernel/traps_64.c
2273
printk(KERN_EMERG "SUN4V-ITLB: vaddr[%lx] ctx[%lx] "
arch/sparc/kernel/traps_64.c
2290
printk(KERN_EMERG "SUN4V-DTLB: Error at TPC[%lx], tl %d\n",
arch/sparc/kernel/traps_64.c
2292
printk(KERN_EMERG "SUN4V-DTLB: TPC<%pS>\n", (void *) regs->tpc);
arch/sparc/kernel/traps_64.c
2293
printk(KERN_EMERG "SUN4V-DTLB: O7[%lx]\n", regs->u_regs[UREG_I7]);
arch/sparc/kernel/traps_64.c
2294
printk(KERN_EMERG "SUN4V-DTLB: O7<%pS>\n",
arch/sparc/kernel/traps_64.c
2296
printk(KERN_EMERG "SUN4V-DTLB: vaddr[%lx] ctx[%lx] "
arch/sparc/kernel/traps_64.c
230
printk("sun4v_insn_access_exception: ADDR[%016lx] "
arch/sparc/kernel/traps_64.c
2306
printk(KERN_CRIT "SUN4V: TLB hv call error %lu for op %lu\n",
arch/sparc/kernel/traps_64.c
2312
printk(KERN_CRIT "SUN4V: XCALL TLB hv call error %lu for op %lu\n",
arch/sparc/kernel/traps_64.c
2427
printk("Instruction DUMP:");
arch/sparc/kernel/traps_64.c
2429
printk("%c%08x%c",i?' ':'<',pc[i],i?' ':'>');
arch/sparc/kernel/traps_64.c
2430
printk("\n");
arch/sparc/kernel/traps_64.c
2444
printk("Instruction DUMP:");
arch/sparc/kernel/traps_64.c
2446
printk("%c%08x%c",i==3?' ':'<',buf[i],i==3?' ':'>');
arch/sparc/kernel/traps_64.c
2447
printk("\n");
arch/sparc/kernel/traps_64.c
2474
printk("%sCall Trace:\n", loglvl);
arch/sparc/kernel/traps_64.c
2526
printk(
arch/sparc/kernel/traps_64.c
2532
printk("%s(%d): %s [#%d]\n", current->comm, task_pid_nr(current), str, ++die_counter);
arch/sparc/kernel/traps_64.c
2548
printk("Caller[%016lx]: %pS\n", rw->ins[7],
arch/sparc/kernel/traps_64.c
307
printk("Exception: PC<%016lx> faddr<UNKNOWN>\n", regs->tpc);
arch/sparc/kernel/traps_64.c
308
printk("EX_TABLE: insn<%016lx> fixup<%016lx>\n",
arch/sparc/kernel/traps_64.c
316
printk("spitfire_data_access_exception: SFSR[%016lx] "
arch/sparc/kernel/traps_64.c
356
printk("Exception: PC<%016lx> faddr<UNKNOWN>\n", regs->tpc);
arch/sparc/kernel/traps_64.c
357
printk("EX_TABLE: insn<%016lx> fixup<%016lx>\n",
arch/sparc/kernel/traps_64.c
364
printk("sun4v_data_access_exception: ADDR[%016lx] "
arch/sparc/kernel/traps_64.c
496
printk(KERN_WARNING "CPU[%d]: UDBL Syndrome[%x] "
arch/sparc/kernel/traps_64.c
507
printk(KERN_WARNING "CPU[%d]: UDBH Syndrome[%x] "
arch/sparc/kernel/traps_64.c
517
printk(KERN_WARNING "CPU[%d]: Correctable ECC Error "
arch/sparc/kernel/traps_64.c
537
printk(KERN_WARNING "CPU[%d]: Uncorrectable Error AFSR[%lx] "
arch/sparc/kernel/traps_64.c
633
printk("CHEETAH: Enabling P-Cache on cpu %d.\n",
arch/sparc/kernel/traps_64.c
74
printk(KERN_EMERG "TRAPLOG: Error at trap level 0x%lx, "
arch/sparc/kernel/traps_64.c
79
printk(KERN_EMERG
arch/sparc/kernel/traps_64.c
85
printk("TRAPLOG: TPC<%pS>\n", (void *) p->trapstack[i].tpc);
arch/sparc/kernel/unaligned_32.c
223
printk(KERN_ALERT "Unable to handle kernel NULL pointer dereference in mna handler");
arch/sparc/kernel/unaligned_32.c
225
printk(KERN_ALERT "Unable to handle kernel paging request in mna handler");
arch/sparc/kernel/unaligned_32.c
226
printk(KERN_ALERT " at virtual address %08lx\n",address);
arch/sparc/kernel/unaligned_32.c
227
printk(KERN_ALERT "current->{mm,active_mm}->context = %08lx\n",
arch/sparc/kernel/unaligned_32.c
230
printk(KERN_ALERT "current->{mm,active_mm}->pgd = %08lx\n",
arch/sparc/kernel/unaligned_32.c
246
printk("Unsupported unaligned load/store trap for kernel at <%08lx>.\n",
arch/sparc/kernel/unaligned_32.c
60
printk("Impossible unaligned trap. insn=%08x\n", insn);
arch/sparc/kernel/unaligned_64.c
272
printk(KERN_ALERT "Unable to handle kernel NULL "
arch/sparc/kernel/unaligned_64.c
275
printk(KERN_ALERT "Unable to handle kernel paging "
arch/sparc/kernel/unaligned_64.c
277
printk(KERN_ALERT " at virtual address %016lx\n",address);
arch/sparc/kernel/unaligned_64.c
278
printk(KERN_ALERT "current->{active_,}mm->context = %016lx\n",
arch/sparc/kernel/unaligned_64.c
281
printk(KERN_ALERT "current->{active_,}mm->pgd = %016lx\n",
arch/sparc/kernel/unaligned_64.c
301
printk("Kernel unaligned access at TPC[%lx] %pS\n",
arch/sparc/kernel/unaligned_64.c
328
printk("Unsupported unaligned load/store trap for kernel "
arch/sparc/kernel/unaligned_64.c
74
printk("Impossible unaligned trap. insn=%08x\n", insn);
arch/sparc/kernel/vio.c
311
printk(KERN_ERR "VIO: Type string [%s] is too long.\n",
arch/sparc/kernel/vio.c
324
printk(KERN_ERR "VIO: Compat len %d for [%s] is too long.\n",
arch/sparc/kernel/vio.c
331
printk(KERN_ERR "VIO: Could not allocate vio_dev\n");
arch/sparc/kernel/vio.c
400
printk(KERN_ERR "VIO: Could not register device %s, err=%d\n",
arch/sparc/kernel/vio.c
450
printk(KERN_INFO "VIO: Removing device %s\n", dev_name(dev));
arch/sparc/kernel/vio.c
511
printk(KERN_ERR "VIO: Could not register bus type err=%d\n",
arch/sparc/kernel/vio.c
522
printk(KERN_INFO "VIO: No channel-devices MDESC node.\n");
arch/sparc/kernel/vio.c
530
printk(KERN_INFO "VIO: No channel-devices OBP node.\n");
arch/sparc/kernel/vio.c
536
printk(KERN_ERR "VIO: Channel devices lacks compatible "
arch/sparc/kernel/vio.c
541
printk(KERN_ERR "VIO: Channel devices node lacks (%s) "
arch/sparc/kernel/vio.c
548
printk(KERN_ERR "VIO: Channel devices lacks %s property\n",
arch/sparc/kernel/vio.c
558
printk(KERN_ERR "VIO: Could not create root device.\n");
arch/sparc/kernel/viohs.c
168
printk(KERN_ERR "vio: ID[%lu] Resetting connection.\n",
arch/sparc/kernel/viohs.c
778
printk(KERN_WARNING "%s: Port %lu bind failed, "
arch/sparc/kernel/viohs.c
790
printk(KERN_WARNING "%s: Port %lu connect failed, "
arch/sparc/lib/bitext.c
68
/* P3 */ printk(KERN_ERR
arch/sparc/math-emu/math_32.c
171
printk("In do_mathemu()... pc is %08lx\n", regs->pc);
arch/sparc/math-emu/math_32.c
172
printk("fpqdepth is %ld\n", fpt->thread.fpqdepth);
arch/sparc/math-emu/math_32.c
174
printk("%d: %08lx at %08lx\n", i, fpt->thread.fpqueue[i].insn,
arch/sparc/math-emu/math_32.c
180
printk("precise trap at %08lx\n", regs->pc);
arch/sparc/math-emu/math_32.c
293
printk("In do_mathemu(), emulating %08lx\n", insn);
arch/sparc/math-emu/math_32.c
344
printk("attempt to emulate unrecognised FPop!\n");
arch/sparc/math-emu/math_32.c
423
printk("executing insn...\n");
arch/sparc/mm/fault_32.c
236
printk("Exception: PC<%08lx> faddr<%08lx>\n",
arch/sparc/mm/fault_32.c
238
printk("EX_TABLE: insn<%08lx> fixup<%08x>\n",
arch/sparc/mm/fault_32.c
44
printk(KERN_ALERT
arch/sparc/mm/fault_32.c
47
printk(KERN_ALERT "Unable to handle kernel paging request at virtual address %08lx\n",
arch/sparc/mm/fault_32.c
50
printk(KERN_ALERT "tsk->{mm,active_mm}->context = %08lx\n",
arch/sparc/mm/fault_32.c
52
printk(KERN_ALERT "tsk->{mm,active_mm}->pgd = %08lx\n",
arch/sparc/mm/fault_32.c
68
printk("%s%s[%d]: segfault at %lx ip %px (rpc %px) sp %px error %x",
arch/sparc/mm/fault_32.c
76
printk(KERN_CONT "\n");
arch/sparc/mm/fault_64.c
149
printk("%s%s[%d]: segfault at %lx ip %px (rpc %px) sp %px error %x",
arch/sparc/mm/fault_64.c
157
printk(KERN_CONT "\n");
arch/sparc/mm/fault_64.c
260
printk(KERN_ERR "FAULT[%s:%d]: 32-bit process reports "
arch/sparc/mm/fault_64.c
45
printk(KERN_ALERT "Unable to handle kernel NULL "
arch/sparc/mm/fault_64.c
48
printk(KERN_ALERT "Unable to handle kernel paging request "
arch/sparc/mm/fault_64.c
51
printk(KERN_ALERT "tsk->{mm,active_mm}->context = %016lx\n",
arch/sparc/mm/fault_64.c
55
printk(KERN_ALERT "tsk->{mm,active_mm}->pgd = %016lx\n",
arch/sparc/mm/fault_64.c
63
printk(KERN_CRIT "OOPS: Bogus kernel PC [%016lx] in fault handler\n",
arch/sparc/mm/fault_64.c
65
printk(KERN_CRIT "OOPS: RPC [%016lx]\n", regs->u_regs[15]);
arch/sparc/mm/fault_64.c
66
printk("OOPS: RPC <%pS>\n", (void *) regs->u_regs[15]);
arch/sparc/mm/fault_64.c
67
printk(KERN_CRIT "OOPS: Fault was to vaddr[%lx]\n", vaddr);
arch/sparc/mm/init_32.c
115
printk(KERN_CRIT "initrd extends beyond end of memory "
arch/sparc/mm/init_32.c
185
printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
arch/sparc/mm/init_64.c
1404
printk(KERN_ERR "Inconsistent NUMA state, "
arch/sparc/mm/init_64.c
1434
printk(KERN_INFO "NUMA GROUP[%d]: cpus [ ", index);
arch/sparc/mm/init_64.c
1436
printk("%d ", cpu);
arch/sparc/mm/init_64.c
1437
printk("]\n");
arch/sparc/mm/init_64.c
1581
printk(KERN_INFO "Top of RAM: 0x%lx, Total RAM: 0x%lx\n",
arch/sparc/mm/init_64.c
1583
printk(KERN_INFO "Memory hole size: %ldMB\n",
arch/sparc/mm/init_64.c
1890
printk("Allocated %ld bytes for kernel page tables.\n",
arch/sparc/mm/init_64.c
2386
printk("Kernel: Using %d locked TLB entries for main kernel image.\n",
arch/sparc/mm/init_64.c
2450
printk("Booting Linux...\n");
arch/sparc/mm/init_64.c
709
printk("Remapping the kernel... ");
arch/sparc/mm/init_64.c
711
printk("done.\n");
arch/sparc/mm/init_64.c
863
printk(KERN_INFO f, ## a); \
arch/sparc/mm/io-unit.c
31
#define IOD(x) printk(x)
arch/sparc/mm/iommu.c
128
printk(KERN_INFO "IOMMU: impl %d vers %d table 0x%p[%d B] map [%d b]\n",
arch/sparc/mm/leon_mm.c
100
printk(KERN_INFO "swprobe: pmd is invalid => 0\n");
arch/sparc/mm/leon_mm.c
105
printk(KERN_INFO "swprobe: --- pmd (%x) ---\n", pmd);
arch/sparc/mm/leon_mm.c
111
printk(KERN_INFO "swprobe: !_pfn_valid(%x)=>0\n",
arch/sparc/mm/leon_mm.c
120
printk(KERN_INFO "swprobe: ped is entry level 1\n");
arch/sparc/mm/leon_mm.c
127
printk(KERN_INFO "swprobe: ped is invalid => 0\n");
arch/sparc/mm/leon_mm.c
132
printk(KERN_INFO "swprobe: --- ped (%x) ---\n", ped);
arch/sparc/mm/leon_mm.c
142
printk(KERN_INFO "swprobe: ptr is entry level 0\n");
arch/sparc/mm/leon_mm.c
148
printk(KERN_INFO "swprobe: ptr is invalid => 0\n");
arch/sparc/mm/leon_mm.c
171
printk(KERN_INFO "swprobe: padde %x\n", paddr_calc);
arch/sparc/mm/leon_mm.c
253
printk(KERN_INFO "CACHE: %s cache, set size %dk\n",
arch/sparc/mm/leon_mm.c
259
printk(KERN_INFO "CACHE: not flushing on every context switch\n");
arch/sparc/mm/leon_mm.c
47
printk(KERN_INFO "swprobe: trace on\n");
arch/sparc/mm/leon_mm.c
52
printk(KERN_INFO "swprobe: leon_get_ctable_ptr returned 0=>0\n");
arch/sparc/mm/leon_mm.c
57
printk(KERN_INFO
arch/sparc/mm/leon_mm.c
65
printk(KERN_INFO "swprobe: --- ctx (%x) ---\n", ctx);
arch/sparc/mm/leon_mm.c
71
printk(KERN_INFO "swprobe: pgd is entry level 3\n");
arch/sparc/mm/leon_mm.c
78
printk(KERN_INFO "swprobe: pgd is invalid => 0\n");
arch/sparc/mm/leon_mm.c
83
printk(KERN_INFO "swprobe: --- pgd (%x) ---\n", pgd);
arch/sparc/mm/leon_mm.c
93
printk(KERN_INFO "swprobe: pmd is entry level 2\n");
arch/sparc/mm/srmmu.c
1036
printk("SRMMU: Using VAC size of %d bytes, line size %d bytes.\n",
arch/sparc/mm/srmmu.c
154
printk(KERN_ERR "Size 0x%x too small for nocache request\n",
arch/sparc/mm/srmmu.c
159
printk(KERN_ERR "Size 0x%x unaligned in nocache request\n",
arch/sparc/mm/srmmu.c
169
printk(KERN_ERR "srmmu: out of nocache %d: %d/%d\n",
arch/sparc/mm/srmmu.c
198
printk("Vaddr %lx is smaller than nocache base 0x%lx\n",
arch/sparc/mm/srmmu.c
203
printk("Vaddr %lx is bigger than nocache end 0x%lx\n",
arch/sparc/mm/srmmu.c
208
printk("Size 0x%x is not a power of 2\n", size);
arch/sparc/mm/srmmu.c
212
printk("Size 0x%x is too small\n", size);
arch/sparc/mm/srmmu.c
216
printk("Vaddr %lx is not aligned to size 0x%x\n", vaddr, size);
arch/sparc/mm/tsb.c
267
printk(KERN_ERR "TSB[%s:%d]: Impossible TSB size %lu, killing process.\n",
arch/sparc/prom/init_32.c
72
printk("PROMLIB: Sun Boot Prom Version %d Revision %d\n",
arch/sparc/prom/init_64.c
52
printk("PROMLIB: Sun IEEE Boot Prom '%s'\n", prom_version);
arch/sparc/prom/init_64.c
53
printk("PROMLIB: Root node compatible: %s\n", prom_root_compatible);
arch/um/drivers/chan_kern.c
17
printk(KERN_ERR "Using a channel type which is configured out of "
arch/um/drivers/chan_kern.c
25
printk(KERN_ERR "Using a channel type which is configured out of "
arch/um/drivers/chan_kern.c
32
printk(KERN_ERR "Using a channel type which is configured out of "
arch/um/drivers/chan_kern.c
325
printk(KERN_INFO "Console initialized on /dev/%s%d\n", co->name,
arch/um/drivers/chan_kern.c
38
printk(KERN_ERR "Using a channel type which is configured out of "
arch/um/drivers/chan_kern.c
45
printk(KERN_ERR "Using a channel type which is configured out of "
arch/um/drivers/chan_kern.c
52
printk(KERN_ERR "Using a channel type which is configured out of "
arch/um/drivers/chan_kern.c
60
printk(KERN_ERR "Using a channel type which is configured out of "
arch/um/drivers/chan_kern.c
67
printk(KERN_ERR "Using a channel type which is configured out of "
arch/um/drivers/chan_user.c
248
printk(UM_KERN_ERR "winch_tramp : os_pipe failed, err = %d\n",
arch/um/drivers/chan_user.c
264
printk(UM_KERN_ERR "fork of winch_thread failed - errno = %d\n",
arch/um/drivers/chan_user.c
272
printk(UM_KERN_ERR "winch_tramp : failed to read "
arch/um/drivers/chan_user.c
274
printk(UM_KERN_ERR "read failed, err = %d\n", errno);
arch/um/drivers/chan_user.c
275
printk(UM_KERN_ERR "fd %d will not support SIGWINCH\n", fd);
arch/um/drivers/chan_user.c
282
printk(UM_KERN_ERR "winch_tramp: failed to set thread_fd "
arch/um/drivers/chan_user.c
320
printk(UM_KERN_ERR "register_winch : failed to write "
arch/um/drivers/cow_sys.h
19
#define cow_printf printk
arch/um/drivers/fd.c
29
printk(UM_KERN_ERR "fd_init : channel type 'fd' must specify a "
arch/um/drivers/fd.c
36
printk(UM_KERN_ERR "fd_init : couldn't parse file descriptor "
arch/um/drivers/fd.c
79
printk(UM_KERN_ERR "Failed to restore terminal state - "
arch/um/drivers/harddog_user.c
120
printk("ping_watchdog - write failed, ret = %d, err = %d\n",
arch/um/drivers/harddog_user.c
43
printk("harddog_open - os_pipe failed, err = %d\n", -err);
arch/um/drivers/harddog_user.c
49
printk("harddog_open - os_pipe failed, err = %d\n", -err);
arch/um/drivers/harddog_user.c
75
printk("harddog_open - run_helper failed, errno = %d\n", -err);
arch/um/drivers/harddog_user.c
81
printk("harddog_open - EOF on watchdog pipe\n");
arch/um/drivers/harddog_user.c
87
printk("harddog_open - read of watchdog pipe failed, "
arch/um/drivers/hostaudio_kern.c
107
printk(KERN_DEBUG "hostaudio: write called, count = %d\n", count);
arch/um/drivers/hostaudio_kern.c
128
printk(KERN_DEBUG "hostaudio: poll called (unimplemented)\n");
arch/um/drivers/hostaudio_kern.c
142
printk(KERN_DEBUG "hostaudio: ioctl called, cmd = %u\n", cmd);
arch/um/drivers/hostaudio_kern.c
185
printk(KERN_DEBUG "hostaudio: open called (host: %s)\n", dsp);
arch/um/drivers/hostaudio_kern.c
218
printk(KERN_DEBUG "hostaudio: release called\n");
arch/um/drivers/hostaudio_kern.c
234
printk(KERN_DEBUG "hostmixer: ioctl called\n");
arch/um/drivers/hostaudio_kern.c
247
printk(KERN_DEBUG "hostmixer: open called (host: %s)\n", mixer);
arch/um/drivers/hostaudio_kern.c
267
printk(KERN_ERR "hostaudio_open_mixdev failed to open '%s', "
arch/um/drivers/hostaudio_kern.c
283
printk(KERN_DEBUG "hostmixer: release called\n");
arch/um/drivers/hostaudio_kern.c
325
printk(KERN_INFO "UML Audio Relay (host dsp = %s, host mixer = %s)\n",
arch/um/drivers/hostaudio_kern.c
331
printk(KERN_ERR "hostaudio: couldn't register DSP device!\n");
arch/um/drivers/hostaudio_kern.c
337
printk(KERN_ERR "hostmixer: couldn't register mixer "
arch/um/drivers/hostaudio_kern.c
80
printk(KERN_DEBUG "hostaudio: read called, count = %d\n", count);
arch/um/drivers/line.c
455
printk(KERN_ERR "Failed to set up %s with "
arch/um/drivers/line.c
575
printk(KERN_ERR "register_lines : can't register %s driver\n",
arch/um/drivers/line.c
641
printk(KERN_ERR "winch_interrupt : read failed, errno = %d\n",
arch/um/drivers/line.c
643
printk(KERN_ERR "fd %d is losing SIGWINCH support\n",
arch/um/drivers/line.c
677
printk(KERN_ERR "register_winch_irq - kmalloc failed\n");
arch/um/drivers/line.c
693
printk(KERN_ERR "register_winch_irq - failed to register "
arch/um/drivers/line.c
765
printk(KERN_ERR "Failed to allocate buffer for xterm title\n");
arch/um/drivers/line.c
93
printk(KERN_ERR "buffer_data - atomic allocation "
arch/um/drivers/mconsole_kern.c
123
printk(KERN_WARNING "%.*s", len, ptr);
arch/um/drivers/mconsole_kern.c
147
printk(KERN_ERR "open /proc/%s: %ld\n", ptr, PTR_ERR(file));
arch/um/drivers/mconsole_kern.c
364
printk(KERN_ERR "Failed to release "
arch/um/drivers/mconsole_kern.c
421
else printk(KERN_ERR "Can't release memory to the host - memory "
arch/um/drivers/mconsole_kern.c
733
printk(KERN_ERR "Failed to initialize management console\n");
arch/um/drivers/mconsole_kern.c
744
printk(KERN_ERR "Failed to get IRQ for management console\n");
arch/um/drivers/mconsole_kern.c
754
else printk(KERN_ERR "mconsole_setup failed to strdup "
arch/um/drivers/mconsole_kern.c
758
printk(KERN_INFO "mconsole (version %d) initialized on %s\n",
arch/um/drivers/mconsole_kern.c
797
printk(KERN_INFO "create_proc_mconsole : proc_create failed\n");
arch/um/drivers/mconsole_kern.c
825
else printk(KERN_ERR "mconsole_setup : Unknown option - '%s'\n", str);
arch/um/drivers/mconsole_user.c
192
printk(UM_KERN_ERR "mconsole_notify - socket failed, "
arch/um/drivers/mconsole_user.c
217
printk(UM_KERN_ERR "mconsole_notify - sendto failed, "
arch/um/drivers/port_kern.c
106
printk(KERN_ERR "port_accept : failed to get IRQ for "
arch/um/drivers/port_kern.c
113
printk(KERN_ERR "No one waiting for port\n");
arch/um/drivers/port_kern.c
175
printk(KERN_ERR "Allocation of port list failed\n");
arch/um/drivers/port_kern.c
181
printk(KERN_ERR "binding to port %d failed, errno = %d\n",
arch/um/drivers/port_kern.c
188
printk(KERN_ERR "Failed to get IRQ for port %d\n", port_num);
arch/um/drivers/port_kern.c
207
printk(KERN_ERR "Allocation of port device entry failed\n");
arch/um/drivers/port_kern.c
57
printk(KERN_ERR "pipe_interrupt : os_rcv_fd_msg returned %zd\n",
arch/um/drivers/port_kern.c
86
printk(KERN_ERR "port_accept : port_connection "
arch/um/drivers/port_kern.c
93
printk(KERN_ERR "port_accept : failed to allocate "
arch/um/drivers/port_user.c
185
printk(UM_KERN_ERR "port_connection : error accessing port-helper "
arch/um/drivers/port_user.c
188
printk(UM_KERN_ERR "Set UML_PORT_HELPER environment "
arch/um/drivers/port_user.c
33
printk(UM_KERN_ERR "port_init : channel type 'port' must "
arch/um/drivers/port_user.c
40
printk(UM_KERN_ERR "port_init : couldn't parse port '%s'\n",
arch/um/drivers/pty.c
109
printk(UM_KERN_ERR "getmaster - no usable host pty devices\n");
arch/um/drivers/pty.c
50
printk(UM_KERN_ERR "open_pts : Failed to open pts\n");
arch/um/drivers/ssl.c
151
printk(KERN_INFO "Initializing software serial port version %d\n",
arch/um/drivers/ssl.c
169
printk(KERN_ERR "setup_one_line failed for "
arch/um/drivers/ssl.c
26
printk(KERN_INFO "Serial line %d assigned device '%s'\n", dev,
arch/um/drivers/stdio_console.c
157
printk(KERN_INFO "Initialized stdio console driver\n");
arch/um/drivers/stdio_console.c
171
printk(KERN_ERR "setup_one_line failed for "
arch/um/drivers/stdio_console.c
32
printk(KERN_INFO "Virtual console %d assigned device '%s'\n", dev,
arch/um/drivers/tty.c
24
printk(UM_KERN_ERR "tty_init : channel type 'tty' must specify "
arch/um/drivers/ubd_kern.c
1077
printk(KERN_ERR "Failed to initialize ubd buffering\n");
arch/um/drivers/ubd_kern.c
1086
printk(KERN_ERR "Failed to initialize ubd buffering\n");
arch/um/drivers/ubd_kern.c
1094
printk(KERN_ERR "Failed to initialize ubd device %d :"
arch/um/drivers/ubd_kern.c
1109
printk(KERN_INFO "ubd: Synchronous mode\n");
arch/um/drivers/ubd_kern.c
1115
printk(KERN_ERR
arch/um/drivers/ubd_kern.c
1123
printk(KERN_ERR "um_request_irq failed - errno = %d\n", -err);
arch/um/drivers/ubd_kern.c
338
printk(KERN_ERR "Failed to initialize device with \"%s\" : "
arch/um/drivers/ubd_kern.c
378
printk("udb%s specified on command line is almost certainly a ubd -> "
arch/um/drivers/ubd_kern.c
543
printk(KERN_ERR "Failed to get modification time of backing "
arch/um/drivers/ubd_kern.c
550
printk(KERN_ERR "Failed to get size of backing file \"%s\", "
arch/um/drivers/ubd_kern.c
558
printk(KERN_ERR "Size mismatch (%llu vs %llu) of COW header "
arch/um/drivers/ubd_kern.c
563
printk(KERN_ERR "mtime mismatch (%lld vs %lld) of COW header vs "
arch/um/drivers/ubd_kern.c
582
printk(KERN_ERR "Couldn't stat '%s', err = %d\n", from_cmdline,
arch/um/drivers/ubd_kern.c
588
printk(KERN_ERR "Couldn't stat '%s', err = %d\n", from_cow,
arch/um/drivers/ubd_kern.c
595
printk(KERN_ERR "Backing file mismatch - \"%s\" requested, "
arch/um/drivers/ubd_kern.c
626
printk(KERN_INFO "Not locking \"%s\" on the host\n", file);
arch/um/drivers/ubd_kern.c
630
printk(KERN_ERR "Failed to lock '%s', err = %d\n",
arch/um/drivers/ubd_kern.c
643
printk(KERN_ERR "Failed to read COW header from COW file "
arch/um/drivers/ubd_kern.c
656
printk(KERN_ERR "Switching backing file to '%s'\n",
arch/um/drivers/ubd_kern.c
661
printk(KERN_ERR "Switch failed, errno = %d\n", -err);
arch/um/drivers/ubd_kern.c
691
printk(KERN_ERR "Open of COW file '%s' failed, errno = %d\n",
arch/um/drivers/ubd_kern.c
741
printk(KERN_INFO "Creating \"%s\" as COW file for "
arch/um/drivers/ubd_kern.c
747
printk("Failed to open '%s', errno = %d\n", ubd_dev->file,
arch/um/drivers/ubd_kern.c
757
printk(KERN_ERR "Failed to vmalloc COW bitmap\n");
arch/um/drivers/ubd_user.c
34
printk("start_io_thread - os_pipe failed, err = %d\n", -err);
arch/um/drivers/ubd_user.c
46
printk("start_io_thread - failed to set nonblocking I/O.\n");
arch/um/drivers/ubd_user.c
52
printk("%s - failed to run helper thread, err = %d\n",
arch/um/drivers/vector_user.c
120
printk(UM_KERN_ERR "vector_setup - Couldn't parse '%s'\n", arg);
arch/um/drivers/vector_user.c
142
printk(UM_KERN_ERR "uml_tap: failed to open tun device\n");
arch/um/drivers/vector_user.c
151
printk(UM_KERN_ERR "uml_tap: failed to select tap interface\n");
arch/um/drivers/vector_user.c
194
printk(UM_KERN_ERR "user_init_raw: init failed, error %d", err);
arch/um/drivers/vector_user.c
219
printk(UM_KERN_ERR "uml_tap: failed to allocate file descriptors\n");
arch/um/drivers/vector_user.c
239
printk(UM_KERN_ERR "uml_tap: failed to create tun interface\n");
arch/um/drivers/vector_user.c
254
printk(UM_KERN_ERR "user_init_tap: init failed, error %d", fd);
arch/um/drivers/vector_user.c
267
printk(UM_KERN_ERR "uml_tap: failed to parse interface spec\n");
arch/um/drivers/vector_user.c
273
printk(UM_KERN_ERR "uml_tap: failed to allocate file descriptors\n");
arch/um/drivers/vector_user.c
285
printk(UM_KERN_ERR "uml_tap: failed to create tun interface: %i\n", result->tx_fd);
arch/um/drivers/vector_user.c
293
printk(UM_KERN_ERR
arch/um/drivers/vector_user.c
305
printk(UM_KERN_ERR "user_init_hybrid: init failed");
arch/um/drivers/vector_user.c
322
printk(UM_KERN_ERR "unix open:cannot allocate remote addr");
arch/um/drivers/vector_user.c
327
printk(UM_KERN_ERR "unix open:cannot allocate remote addr");
arch/um/drivers/vector_user.c
337
printk(UM_KERN_ERR "bess open:cannot allocate local addr");
arch/um/drivers/vector_user.c
349
printk(KERN_ERR "Unsupported unix socket type\n");
arch/um/drivers/vector_user.c
355
printk(UM_KERN_ERR
arch/um/drivers/vector_user.c
363
printk(UM_KERN_ERR UNIX_BIND_FAIL, errno);
arch/um/drivers/vector_user.c
370
printk(UM_KERN_ERR "bess open:cannot connect to %s %i", remote_addr->sun_path, -errno);
arch/um/drivers/vector_user.c
417
printk(UM_KERN_ERR "fd open: bad or missing fd argument");
arch/um/drivers/vector_user.c
423
printk(UM_KERN_ERR "fd open: allocation failed");
arch/um/drivers/vector_user.c
485
printk(UM_KERN_ERR "vde: seqpacket socketpair err %d", -errno);
arch/um/drivers/vector_user.c
490
printk(UM_KERN_ERR "vde: seqpacket socketpair cloexec err %d", -errno);
arch/um/drivers/vector_user.c
501
printk(UM_KERN_ERR "fd open: allocation failed");
arch/um/drivers/vector_user.c
554
printk(UM_KERN_ERR "user_init_raw: init failed, error %d", err);
arch/um/drivers/vector_user.c
579
printk(UM_KERN_INFO VNET_HDR_FAIL, fd);
arch/um/drivers/vector_user.c
590
printk(UM_KERN_INFO TUN_GET_F_FAIL, strerror(errno));
arch/um/drivers/vector_user.c
594
printk(UM_KERN_INFO "tapraw: No VNET HEADER support");
arch/um/drivers/vector_user.c
654
printk(KERN_ERR "Unsupported socket type\n");
arch/um/drivers/vector_user.c
661
printk(UM_KERN_ERR
arch/um/drivers/vector_user.c
670
printk(UM_KERN_ERR
arch/um/drivers/vector_user.c
679
printk(UM_KERN_ERR L2TPV3_BIND_FAIL, errno);
arch/um/drivers/vector_user.c
690
printk(UM_KERN_ERR
arch/um/drivers/vector_user.c
717
printk(UM_KERN_ERR "user_init_socket: init failed, error %d", err);
arch/um/drivers/vector_user.c
735
printk(UM_KERN_ERR "no parsed config for unit %d\n", unit);
arch/um/drivers/vector_user.c
740
printk(UM_KERN_ERR "missing transport for unit %d\n", unit);
arch/um/drivers/vector_user.c
844
printk(KERN_ERR BPF_ATTACH_FAIL, prog->len, prog->filter, fd, -errno);
arch/um/drivers/vector_user.c
854
printk(KERN_ERR BPF_DETACH_FAIL, prog->len, prog->filter, fd, -errno);
arch/um/drivers/vector_user.c
907
printk(KERN_ERR "Error %d reading bpf file", -errno);
arch/um/drivers/vector_user.c
912
printk(KERN_ERR "Failed to allocate bpf prog buffer");
arch/um/drivers/vector_user.c
919
printk(KERN_ERR "Error %d opening bpf file", -errno);
arch/um/drivers/vector_user.c
924
printk(KERN_ERR "Failed to allocate bpf buffer");
arch/um/drivers/vector_user.c
930
printk(KERN_ERR "Failed to read bpf program %s, error %d", filename, res);
arch/um/drivers/xterm.c
102
printk(UM_KERN_ERR "xterm_open : neither $DISPLAY nor $WAYLAND_DISPLAY is set.\n");
arch/um/drivers/xterm.c
115
printk(UM_KERN_ERR "xterm_open : mkstemp failed, errno = %d\n",
arch/um/drivers/xterm.c
122
printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n",
arch/um/drivers/xterm.c
131
printk(UM_KERN_ERR "xterm_open : create_unix_socket failed, "
arch/um/drivers/xterm.c
140
printk(UM_KERN_ERR "xterm_open : run_helper failed, "
arch/um/drivers/xterm.c
147
printk(UM_KERN_ERR "xterm_open : failed to set descriptor "
arch/um/drivers/xterm.c
156
printk(UM_KERN_ERR "xterm_open : xterm_fd failed, err = %d\n",
arch/um/drivers/xterm.c
163
printk(UM_KERN_ERR "xterm_open : failed to set xterm "
arch/um/drivers/xterm_kern.c
50
printk(KERN_ERR "xterm_fd : failed to allocate xterm_wait\n");
arch/um/drivers/xterm_kern.c
63
printk(KERN_ERR "xterm_fd : failed to get IRQ for xterm, "
arch/um/include/asm/pgtable-2level.h
28
printk("%s:%d: bad pte %p(%08lx).\n", __FILE__, __LINE__, &(e), \
arch/um/include/asm/pgtable-2level.h
31
printk("%s:%d: bad pgd %p(%08lx).\n", __FILE__, __LINE__, &(e), \
arch/um/include/asm/pgtable-4level.h
46
printk("%s:%d: bad pte %p(%016lx).\n", __FILE__, __LINE__, &(e), \
arch/um/include/asm/pgtable-4level.h
49
printk("%s:%d: bad pmd %p(%016lx).\n", __FILE__, __LINE__, &(e), \
arch/um/include/asm/pgtable-4level.h
52
printk("%s:%d: bad pud %p(%016lx).\n", __FILE__, __LINE__, &(e), \
arch/um/include/asm/pgtable-4level.h
55
printk("%s:%d: bad pgd %p(%016lx).\n", __FILE__, __LINE__, &(e), \
arch/um/kernel/exitcode.c
72
printk(KERN_WARNING "make_proc_exitcode : Failed to register "
arch/um/kernel/load_file.c
16
printk(KERN_ERR "Opening '%s' failed - err = %d\n", filename,
arch/um/kernel/load_file.c
22
printk(KERN_ERR "Read of %d bytes from '%s' failed, "
arch/um/kernel/load_file.c
47
printk(KERN_ERR "\"%s\" is empty\n", filename);
arch/um/kernel/physmem.c
35
printk(KERN_ERR "try increasing the host's "
arch/um/kernel/skas/mmu.c
129
printk("Unexpectedly lost MM child! Affected tasks will segfault.");
arch/um/kernel/skas/mmu.c
93
printk(KERN_ERR "corrupt mm_context - pid = %d\n",
arch/um/kernel/sysrq.c
21
printk("%s [<%08lx>] %s%pS\n", loglvl, address, reliable ? "" : "? ",
arch/um/kernel/sysrq.c
38
printk("%sStack:\n", loglvl);
arch/um/kernel/sysrq.c
48
printk("%sCall Trace:\n", loglvl);
arch/um/kernel/time.c
85
printk(KERN_INFO "time-travel: received broadcast 0x%llx\n", bc_message);
arch/um/kernel/time.c
938
printk(KERN_ERR "register_timer : request_irq failed - "
arch/um/kernel/time.c
943
printk(KERN_ERR "creation of timer failed - errno = %d\n", -err);
arch/um/kernel/time.c
949
printk(KERN_ERR "clocksource_register_hz returned %d\n", err);
arch/um/kernel/tlb.c
45
printk(KERN_ERR "UML ran out of memory on the host side! "
arch/um/kernel/trap.c
250
printk("%s%s[%d]: segfault at %lx ip %px sp %px error %x",
arch/um/kernel/trap.c
257
printk(KERN_CONT "\n");
arch/um/kernel/trap.c
403
printk(KERN_ERR "Bus error - the host /dev/shm or /tmp "
arch/um/kernel/trap.c
420
printk(KERN_ERR "Attempted to relay unknown signal %d (si_code = %d) with errno %d\n",
arch/um/os-Linux/file.c
307
printk(UM_KERN_ERR "Couldn't stat \"%s\" : err = %d\n", file,
arch/um/os-Linux/file.c
319
printk(UM_KERN_ERR "Couldn't open \"%s\", "
arch/um/os-Linux/file.c
325
printk(UM_KERN_ERR "Couldn't get the block size of "
arch/um/os-Linux/file.c
345
printk(UM_KERN_ERR "Couldn't stat \"%s\" : err = %d\n", file,
arch/um/os-Linux/file.c
387
printk(UM_KERN_ERR "os_pipe : Setting FD_CLOEXEC failed, err = %d\n",
arch/um/os-Linux/file.c
405
printk(UM_KERN_ERR "os_set_fd_async : failed to set O_ASYNC "
arch/um/os-Linux/file.c
413
printk(UM_KERN_ERR "os_set_fd_async : Failed to fcntl F_SETOWN "
arch/um/os-Linux/file.c
554
printk(UM_KERN_ERR "create_unix_socket : "
arch/um/os-Linux/file.c
594
printk(UM_KERN_ERR "F_SETLK failed, file already locked by pid %d\n",
arch/um/os-Linux/helper.c
105
printk(UM_KERN_ERR "run_helper : failed to exec %s on host: %s\n",
arch/um/os-Linux/helper.c
137
printk(UM_KERN_ERR "run_helper_thread : clone failed, "
arch/um/os-Linux/helper.c
145
printk(UM_KERN_ERR "run_helper_thread - wait failed, "
arch/um/os-Linux/helper.c
150
printk(UM_KERN_ERR "run_helper_thread - thread "
arch/um/os-Linux/helper.c
165
printk(UM_KERN_ERR "helper_wait : waitpid process %d failed, "
arch/um/os-Linux/helper.c
169
printk(UM_KERN_ERR "helper_wait : process %d exited with "
arch/um/os-Linux/helper.c
57
printk(UM_KERN_ERR "run_helper : pipe failed, errno = %d\n",
arch/um/os-Linux/helper.c
64
printk(UM_KERN_ERR "run_helper : setting FD_CLOEXEC failed, "
arch/um/os-Linux/helper.c
79
printk(UM_KERN_ERR "run_helper : clone failed, errno = %d\n",
arch/um/os-Linux/helper.c
97
printk(UM_KERN_ERR "run_helper : read on pipe failed, "
arch/um/os-Linux/irq.c
103
printk("epollctl add err fd %d, %s\n", fd, strerror(errno));
arch/um/os-Linux/irq.c
119
printk(UM_KERN_ERR
arch/um/os-Linux/irq.c
78
printk(
arch/um/os-Linux/process.c
143
printk(UM_KERN_INFO "Checking host MADV_REMOVE support...");
arch/um/os-Linux/process.c
146
printk(UM_KERN_ERR "Creating test memory file failed, "
arch/um/os-Linux/process.c
154
printk(UM_KERN_ERR "Mapping test memory file failed, "
arch/um/os-Linux/process.c
160
printk(UM_KERN_ERR "MADV_REMOVE failed, err = %d\n", -errno);
arch/um/os-Linux/process.c
164
printk(UM_KERN_CONT "OK\n");
arch/um/os-Linux/sigio.c
112
printk(UM_KERN_ERR "%s: epoll_create failed, errno = %d\n",
arch/um/os-Linux/sigio.c
119
printk(UM_KERN_ERR "%s: os_run_helper_thread failed, errno = %d\n",
arch/um/os-Linux/sigio.c
209
printk(UM_KERN_ERR "check_one_sigio failed, errno = %d\n",
arch/um/os-Linux/sigio.c
218
printk(UM_KERN_ERR "check_one_sigio failed to allocate a "
arch/um/os-Linux/sigio.c
226
printk(UM_KERN_ERR "check_one_sigio : raw failed, errno = %d\n",
arch/um/os-Linux/sigio.c
233
printk(UM_KERN_ERR "check_one_sigio : sigio_async failed, "
arch/um/os-Linux/sigio.c
239
printk(UM_KERN_ERR "check_one_sigio : sigaction 1 failed, "
arch/um/os-Linux/sigio.c
247
printk(UM_KERN_ERR "check_one_sigio : sigaction 2 failed, "
arch/um/os-Linux/sigio.c
259
printk(UM_KERN_ERR "check_one_sigio : sigaction 3 failed, "
arch/um/os-Linux/sigio.c
268
printk(UM_KERN_INFO "Checking that host ptys support output SIGIO...");
arch/um/os-Linux/sigio.c
274
printk(UM_KERN_ERR "tty_output : write failed, errno = %d\n",
arch/um/os-Linux/sigio.c
281
printk(UM_KERN_CONT "Yes\n");
arch/um/os-Linux/sigio.c
284
printk(UM_KERN_CONT "No, enabling workaround\n");
arch/um/os-Linux/sigio.c
286
printk(UM_KERN_CONT "tty_output : read failed, err = %d\n", n);
arch/um/os-Linux/sigio.c
293
printk(UM_KERN_WARNING "No pseudo-terminals available - "
arch/um/os-Linux/sigio.c
46
printk(UM_KERN_ERR "%s: epoll_wait failed, errno = %d\n",
arch/um/os-Linux/sigio.c
52
printk(UM_KERN_ERR "%s: tgkill failed, errno = %d\n",
arch/um/os-Linux/skas/mem.c
102
printk(UM_KERN_ERR "Registers -\n");
arch/um/os-Linux/skas/mem.c
104
printk(UM_KERN_ERR "\t%d\t0x%lx\n", i, syscall_regs[i]);
arch/um/os-Linux/skas/mem.c
38
printk(UM_KERN_ERR "%s : length = %d, last offset = %d",
arch/um/os-Linux/skas/mem.c
41
printk(UM_KERN_ERR "%s : stub syscall type %d failed, return value = 0x%lx\n",
arch/um/os-Linux/skas/mem.c
48
printk(UM_KERN_ERR "%s: FD map num: %d", __func__,
arch/um/os-Linux/skas/process.c
102
printk(UM_KERN_ERR "\t%s\t(%2d): %lx\n", regname, i, regs[i]);
arch/um/os-Linux/skas/process.c
131
printk(UM_KERN_ERR "%s : continue failed, errno = %d\n",
arch/um/os-Linux/skas/process.c
143
printk(UM_KERN_ERR "Failed to get registers from stub, errno = %d\n",
arch/um/os-Linux/skas/process.c
145
printk(UM_KERN_ERR "%s : failed to wait for SIGTRAP, pid = %d, n = %d, errno = %d, status = 0x%x\n",
arch/um/os-Linux/skas/process.c
214
printk(UM_KERN_ERR "%s : FUTEX_WAIT failed, errno = %d\n",
arch/um/os-Linux/skas/process.c
229
printk(UM_KERN_ERR "%s : invalid mcontext offset", __func__);
arch/um/os-Linux/skas/process.c
234
printk(UM_KERN_ERR "%s : expected SIGSYS but got %d",
arch/um/os-Linux/skas/process.c
242
printk(UM_KERN_ERR "%s : failed to wait for stub, pid = %d, errno = %d\n",
arch/um/os-Linux/skas/process.c
257
printk(UM_KERN_ERR "Failed to continue stub, pid = %d, "
arch/um/os-Linux/skas/process.c
373
printk(UM_KERN_INFO "Could not create executable memfd, using temporary file!");
arch/um/os-Linux/skas/process.c
458
printk(UM_KERN_ERR "%s : mmap failed, errno = %d\n",
arch/um/os-Linux/skas/process.c
469
printk(UM_KERN_ERR "%s : socketpair failed, errno = %d\n",
arch/um/os-Linux/skas/process.c
482
printk(UM_KERN_ERR "%s : clone failed, errno = %d\n",
arch/um/os-Linux/skas/process.c
495
printk(UM_KERN_ERR "%s : wait failed, errno = %d\n",
arch/um/os-Linux/skas/process.c
503
printk(UM_KERN_ERR "%s : expected SIGSTOP, got status = %d\n",
arch/um/os-Linux/skas/process.c
511
printk(UM_KERN_ERR "%s : PTRACE_SETOPTIONS failed, errno = %d\n",
arch/um/os-Linux/skas/process.c
519
printk(UM_KERN_ERR "%s : munmap failed, errno = %d\n",
arch/um/os-Linux/skas/process.c
598
printk(UM_KERN_ERR "%s - failed to set regs: %d",
arch/um/os-Linux/skas/process.c
615
printk(UM_KERN_ERR "%s - Error flushing stub syscalls",
arch/um/os-Linux/skas/process.c
627
printk(UM_KERN_ERR "%s - failed to get regs: %d",
arch/um/os-Linux/skas/process.c
656
printk(UM_KERN_ERR "%s - Error flushing stub syscalls: %d",
arch/um/os-Linux/skas/process.c
670
printk(UM_KERN_ERR "%s - ptrace set regs failed, errno = %d\n",
arch/um/os-Linux/skas/process.c
676
printk(UM_KERN_ERR "%s - ptrace set fp regs failed, errno = %d\n",
arch/um/os-Linux/skas/process.c
687
printk(UM_KERN_ERR "%s - ptrace continue failed, op = %d, errno = %d\n",
arch/um/os-Linux/skas/process.c
694
printk(UM_KERN_ERR "%s - wait failed, errno = %d\n",
arch/um/os-Linux/skas/process.c
701
printk(UM_KERN_ERR "%s - PTRACE_GETREGS failed, errno = %d\n",
arch/um/os-Linux/skas/process.c
707
printk(UM_KERN_ERR "%s - get_fp_registers failed, errno = %d\n",
arch/um/os-Linux/skas/process.c
780
printk(UM_KERN_ERR "%s - child stopped with signal %d\n",
arch/um/os-Linux/skas/process.c
851
printk(UM_KERN_ERR "Bad sigsetjmp return in %s - %d\n",
arch/um/os-Linux/skas/process.c
858
printk(UM_KERN_ERR "impossible long jump!");
arch/um/os-Linux/skas/process.c
98
printk(UM_KERN_ERR "Stub registers -\n");
arch/um/os-Linux/smp.c
88
printk(UM_KERN_ERR "impossible long jump!");
arch/um/os-Linux/tty.c
35
printk(UM_KERN_ERR "get_pty : Couldn't open /dev/ptmx - "
arch/um/os-Linux/tty.c
45
printk(UM_KERN_ERR "get_pty : Couldn't grant pty - "
arch/um/os-Linux/tty.c
52
printk(UM_KERN_ERR "get_pty : Couldn't unlock pty - "
arch/um/os-Linux/umid.c
152
printk(UM_KERN_ERR "is_umdir_used : couldn't open pid "
arch/um/os-Linux/umid.c
160
printk(UM_KERN_ERR "is_umdir_used : couldn't read pid file "
arch/um/os-Linux/umid.c
164
printk(UM_KERN_ERR "is_umdir_used : couldn't read pid file "
arch/um/os-Linux/umid.c
171
printk(UM_KERN_ERR "is_umdir_used : couldn't parse pid file "
arch/um/os-Linux/umid.c
177
printk(UM_KERN_ERR "umid \"%s\" is already in use by pid %d\n",
arch/um/os-Linux/umid.c
203
printk(UM_KERN_ERR "is_umdir_used - remove_files_and_dir "
arch/um/os-Linux/umid.c
224
printk(UM_KERN_ERR "Open of machine pid file \"%s\" failed: "
arch/um/os-Linux/umid.c
232
printk(UM_KERN_ERR "Write of pid file failed - err = %d\n",
arch/um/os-Linux/umid.c
268
printk(UM_KERN_ERR "make_umid - mkstemp(%s) failed: "
arch/um/os-Linux/umid.c
303
printk(UM_KERN_ERR "Failed to create '%s' - err = %d\n", umid,
arch/um/os-Linux/umid.c
326
printk(UM_KERN_ERR "Failed to initialize umid \"%s\", trying with a "
arch/um/os-Linux/umid.c
346
printk(UM_KERN_ERR "umid_file_name : buffer too short\n");
arch/um/os-Linux/umid.c
38
printk(UM_KERN_ERR
arch/um/os-Linux/umid.c
54
printk(UM_KERN_ERR "%s : malloc failed, errno = %d\n",
arch/um/os-Linux/umid.c
61
printk(UM_KERN_ERR "Failed to mkdir '%s': %s\n",
arch/x86/coco/sev/vc-handle.c
354
#define sev_printk(fmt, ...) printk(fmt, ##__VA_ARGS__)
arch/x86/crypto/blowfish_glue.c
164
printk(KERN_INFO
arch/x86/crypto/camellia_glue.c
1385
printk(KERN_INFO
arch/x86/crypto/serpent_sse2_glue.c
106
printk(KERN_INFO "SSE2 instructions are not detected.\n");
arch/x86/crypto/twofish_glue_3way.c
148
printk(KERN_INFO
arch/x86/include/asm/apic.h
41
printk(s, ##a); \
arch/x86/include/asm/apic.h
48
#define apic_dbg(s, a...) printk(KERN_DEBUG s, ##a)
arch/x86/include/asm/floppy.h
117
printk(KERN_DEBUG "count=%x, residue=%x calls=%d bytes=%d dma_wait=%d\n",
arch/x86/include/asm/floppy.h
225
printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
arch/x86/include/asm/gart.h
101
printk(KERN_INFO "Aperture pointing to e820 RAM. Ignoring.\n");
arch/x86/include/asm/gart.h
105
printk(KERN_INFO "Aperture too small (%d MB) than (%d MB)\n",
arch/x86/include/asm/gart.h
97
printk(KERN_INFO "Aperture beyond 4GB. Ignoring.\n");
arch/x86/include/asm/pci_x86.h
16
#define DBG(fmt, ...) printk(fmt, ##__VA_ARGS__)
arch/x86/include/asm/pci_x86.h
21
printk(fmt, ##__VA_ARGS__); \
arch/x86/kernel/acpi/cstate.c
159
printk(KERN_DEBUG
arch/x86/kernel/acpi/sleep.c
66
printk(KERN_ERR "wakeup header does not match\n");
arch/x86/kernel/alternative.c
56
printk(KERN_DEBUG pr_fmt(fmt) "\n", ##args); \
arch/x86/kernel/alternative.c
67
printk(KERN_DEBUG pr_fmt(fmt), ##args); \
arch/x86/kernel/alternative.c
69
printk(KERN_CONT "%02hhx ", buf[j]); \
arch/x86/kernel/alternative.c
70
printk(KERN_CONT "%02hhx\n", buf[j]); \
arch/x86/kernel/apic/io_apic.c
1240
printk(KERN_INFO "testing the IO APIC.......................\n");
arch/x86/kernel/apic/io_apic.c
1266
printk(KERN_INFO ".................................... done.\n");
arch/x86/kernel/apic/vector.c
1190
printk(KERN_DEBUG);
arch/x86/kernel/apic/x2apic_phys.c
32
printk(KERN_DEBUG "System requires x2apic physical mode\n");
arch/x86/kernel/apm_32.c
1300
printk(KERN_DEBUG "apm: received %s notify\n",
arch/x86/kernel/apm_32.c
1303
printk(KERN_DEBUG "apm: received unknown "
arch/x86/kernel/apm_32.c
1390
printk(KERN_DEBUG "apm: setting state busy\n");
arch/x86/kernel/apm_32.c
1723
printk(KERN_INFO "apm: Connection version %d.%d\n",
arch/x86/kernel/apm_32.c
1754
printk(KERN_INFO "apm: power status not available\n");
arch/x86/kernel/apm_32.c
1787
printk(KERN_INFO
arch/x86/kernel/apm_32.c
1791
printk("unknown\n");
arch/x86/kernel/apm_32.c
1793
printk("%d%%\n", cx & 0xff);
arch/x86/kernel/apm_32.c
1795
printk(KERN_INFO
arch/x86/kernel/apm_32.c
1799
printk("unknown\n");
arch/x86/kernel/apm_32.c
1801
printk("%d %s\n", dx & 0x7fff,
arch/x86/kernel/apm_32.c
1896
printk("%s\n", d->ident);
arch/x86/kernel/apm_32.c
1906
printk(KERN_INFO "%s machine detected. Mousepad Resume Bug "
arch/x86/kernel/apm_32.c
1916
printk(KERN_INFO "%s bios detected. "
arch/x86/kernel/apm_32.c
1927
printk(KERN_INFO "%s machine detected. "
arch/x86/kernel/apm_32.c
1938
printk(KERN_INFO "%s machine detected. "
arch/x86/kernel/apm_32.c
1948
printk(KERN_INFO "%s machine detected. "
arch/x86/kernel/apm_32.c
1950
printk(KERN_INFO "This bug is fixed in bios P15 which is available for\n");
arch/x86/kernel/apm_32.c
1951
printk(KERN_INFO "download from support.intel.com\n");
arch/x86/kernel/apm_32.c
1961
printk(KERN_INFO "%s machine detected. "
arch/x86/kernel/apm_32.c
1985
printk(KERN_WARNING "BIOS strings suggest APM bugs, "
arch/x86/kernel/apm_32.c
1997
printk(KERN_WARNING "BIOS strings suggest APM reports battery life "
arch/x86/kernel/apm_32.c
2231
printk(KERN_INFO "apm: BIOS not found.\n");
arch/x86/kernel/apm_32.c
2234
printk(KERN_INFO
arch/x86/kernel/apm_32.c
2241
printk(KERN_INFO "apm: no 32 bit BIOS support\n");
arch/x86/kernel/apm_32.c
2267
printk(KERN_INFO "apm: entry %x:%x cseg16 %x dseg %x",
arch/x86/kernel/apm_32.c
2271
printk(" cseg len %x, dseg len %x",
arch/x86/kernel/apm_32.c
2275
printk(" cseg16 len %x", apm_info.bios.cseg_16_len);
arch/x86/kernel/apm_32.c
2276
printk("\n");
arch/x86/kernel/apm_32.c
2332
printk(KERN_NOTICE
arch/x86/kernel/apm_32.c
2343
printk(KERN_WARNING "apm: Could not register misc device.\n");
arch/x86/kernel/apm_32.c
857
printk(KERN_DEBUG "apm_do_idle failed (%d)\n", err);
arch/x86/kernel/bootflag.c
32
printk(KERN_INFO "Simple Boot Flag at 0x%x set to 0x%x\n",
arch/x86/kernel/bootflag.c
75
printk(KERN_WARNING "Simple Boot Flag value 0x%x read from "
arch/x86/kernel/callthunks.c
31
printk(KERN_DEBUG pr_fmt(fmt), ##args); \
arch/x86/kernel/cet.c
128
printk(KERN_DEFAULT CUT_HERE);
arch/x86/kernel/cpuid.c
157
printk(KERN_ERR "cpuid: unable to get major %d for cpuid\n",
arch/x86/kernel/dumpstack.c
121
printk("%sCode: %" __stringify(PROLOGUE_SIZE) "ph <%02x> %"
arch/x86/kernel/dumpstack.c
129
printk("%sCode: Unable to access opcode bytes at 0x%lx.\n",
arch/x86/kernel/dumpstack.c
138
printk("%sEIP: %pS\n", loglvl, (void *)regs->ip);
arch/x86/kernel/dumpstack.c
140
printk("%sRIP: %04x:%pS\n", loglvl, (int)regs->cs, (void *)regs->ip);
arch/x86/kernel/dumpstack.c
148
printk("%sRSP: %04x:%016lx EFLAGS: %08lx", log_lvl, (int)regs->ss,
arch/x86/kernel/dumpstack.c
193
printk("%sCall Trace:\n", log_lvl);
arch/x86/kernel/dumpstack.c
234
printk("%s <%s>\n", log_lvl, stack_name);
arch/x86/kernel/dumpstack.c
302
printk("%s </%s>\n", log_lvl, stack_name);
arch/x86/kernel/dumpstack.c
418
printk(KERN_DEFAULT
arch/x86/kernel/dumpstack.c
70
printk("%s %s%pBb\n", log_lvl, reliable ? "" : "? ", (void *)address);
arch/x86/kernel/e820.c
488
printk(KERN_DEBUG "e820: update [mem %#010Lx-%#010Lx]", start, end - 1);
arch/x86/kernel/e820.c
564
printk(KERN_DEBUG "e820: remove [mem %#010Lx-%#010Lx]", start, end - 1);
arch/x86/kernel/early-quirks.c
104
printk(KERN_INFO "Nvidia board "
arch/x86/kernel/early-quirks.c
107
printk(KERN_INFO "If you got timer trouble "
arch/x86/kernel/early-quirks.c
154
printk(KERN_INFO "SB4X0 revision 0x%x\n", d);
arch/x86/kernel/early-quirks.c
155
printk(KERN_INFO "Ignoring ACPI timer override.\n");
arch/x86/kernel/early-quirks.c
156
printk(KERN_INFO "If you got timer trouble "
arch/x86/kernel/early-quirks.c
196
printk(KERN_INFO "SB600 revision 0x%x\n", rev);
arch/x86/kernel/early-quirks.c
197
printk(KERN_INFO "Ignoring ACPI timer override.\n");
arch/x86/kernel/early-quirks.c
198
printk(KERN_INFO "If you got timer trouble "
arch/x86/kernel/early-quirks.c
43
printk(KERN_INFO "Detected use of extended apic ids "
arch/x86/kernel/early-quirks.c
46
printk(KERN_INFO "Enabling hypertransport extended "
arch/x86/kernel/early-quirks.c
48
printk(KERN_INFO "Note this is a bios bug, "
arch/x86/kernel/early-quirks.c
584
printk(KERN_INFO "Reserving Intel graphics memory at %pR\n",
arch/x86/kernel/early-quirks.c
63
printk(KERN_INFO
arch/x86/kernel/early_printk.c
376
printk(KERN_CRIT "ERROR: earlyprintk= %s already used\n",
arch/x86/kernel/head_32.S
389
call _printk
arch/x86/kernel/i8259.c
341
printk(KERN_INFO "Using NULL legacy PIC\n");
arch/x86/kernel/irq_32.c
41
printk(KERN_WARNING "low stack detected by irq handler\n");
arch/x86/kernel/kgdb.c
287
printk(KERN_ERR "Cannot remove hw breakpoint at %lx\n", addr);
arch/x86/kernel/kgdb.c
314
printk(KERN_ERR "KGDB: hw bpt remove failed %lx\n",
arch/x86/kernel/kgdb.c
482
printk(KERN_ERR "KGDB: trap/step from kernel to user space, "
arch/x86/kernel/kgdb.c
660
printk(KERN_ERR "kgdb: Could not allocate hw"
arch/x86/kernel/mmconf-fam10h_64.c
210
printk(KERN_INFO "Enable MMCONFIG on AMD Family 10h\n");
arch/x86/kernel/module.c
30
printk(KERN_DEBUG fmt, ##__VA_ARGS__)
arch/x86/kernel/module.c
35
printk(KERN_DEBUG fmt, ##__VA_ARGS__); \
arch/x86/kernel/paravirt.c
44
printk(KERN_INFO "Booting paravirtualized kernel on %s\n",
arch/x86/kernel/process_32.c
101
printk("%sDR6: %08lx DR7: %08lx\n",
arch/x86/kernel/process_32.c
70
printk("%sEAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
arch/x86/kernel/process_32.c
72
printk("%sESI: %08lx EDI: %08lx EBP: %08lx ESP: %08lx\n",
arch/x86/kernel/process_32.c
74
printk("%sDS: %04x ES: %04x FS: %04x GS: %04x SS: %04x EFLAGS: %08lx\n",
arch/x86/kernel/process_32.c
84
printk("%sCR0: %08lx CR2: %08lx CR3: %08lx CR4: %08lx\n",
arch/x86/kernel/process_32.c
99
printk("%sDR0: %08lx DR1: %08lx DR2: %08lx DR3: %08lx\n",
arch/x86/kernel/process_64.c
102
printk("%sFS: %016lx GS: %016lx\n",
arch/x86/kernel/process_64.c
121
printk("%sFS: %016lx(%04x) GS:%016lx(%04x) knlGS:%016lx\n",
arch/x86/kernel/process_64.c
123
printk("%sCS: %04x DS: %04x ES: %04x CR0: %016lx\n",
arch/x86/kernel/process_64.c
125
printk("%sCR2: %016lx CR3: %016lx CR4: %016lx\n",
arch/x86/kernel/process_64.c
138
printk("%sDR0: %016lx DR1: %016lx DR2: %016lx\n",
arch/x86/kernel/process_64.c
140
printk("%sDR3: %016lx DR6: %016lx DR7: %016lx\n",
arch/x86/kernel/process_64.c
145
printk("%sPKRU: %08x\n", log_lvl, read_pkru());
arch/x86/kernel/process_64.c
85
printk("%sRAX: %016lx RBX: %016lx RCX: %016lx\n",
arch/x86/kernel/process_64.c
87
printk("%sRDX: %016lx RSI: %016lx RDI: %016lx\n",
arch/x86/kernel/process_64.c
89
printk("%sRBP: %016lx R08: %016lx R09: %016lx\n",
arch/x86/kernel/process_64.c
91
printk("%sR10: %016lx R11: %016lx R12: %016lx\n",
arch/x86/kernel/process_64.c
93
printk("%sR13: %016lx R14: %016lx R15: %016lx\n",
arch/x86/kernel/quirks.c
184
printk(KERN_INFO "HPET not enabled in BIOS. "
arch/x86/kernel/quirks.c
205
printk(KERN_DEBUG "Force enabled HPET at resume\n");
arch/x86/kernel/quirks.c
297
printk(KERN_DEBUG "Force enabled HPET at resume\n");
arch/x86/kernel/quirks.c
356
printk(KERN_DEBUG "Force enabled HPET at resume\n");
arch/x86/kernel/quirks.c
430
printk(KERN_DEBUG "Force enabled HPET at resume\n");
arch/x86/kernel/quirks.c
95
printk(KERN_DEBUG "Force enabled HPET at resume\n");
arch/x86/kernel/rtc.c
45
printk(KERN_ERR "%s: RTC write failed with error %d\n",
arch/x86/kernel/rtc.c
48
printk(KERN_ERR
arch/x86/kernel/setup.c
1104
printk(KERN_DEBUG "initial memory mapped: [mem 0x00000000-%#010lx]\n",
arch/x86/kernel/setup.c
335
printk(KERN_INFO "Allocated new RAMDISK: [mem %#010llx-%#010llx]\n",
arch/x86/kernel/setup.c
342
printk(KERN_INFO "Move RAMDISK from [mem %#010llx-%#010llx] to"
arch/x86/kernel/setup.c
375
printk(KERN_INFO "RAMDISK: [mem %#010llx-%#010llx]\n", ramdisk_image,
arch/x86/kernel/setup.c
732
printk(KERN_DEBUG "reserving inaccessible SNB gfx pages\n");
arch/x86/kernel/setup.c
747
printk(KERN_WARNING "failed to reserve 0x%08lx\n",
arch/x86/kernel/setup.c
858
printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
arch/x86/kernel/setup.c
862
printk(KERN_INFO "NX (Execute Disable) protection: active\n");
arch/x86/kernel/setup.c
865
printk(KERN_NOTICE "Notice: NX (Execute Disable) protection "
arch/x86/kernel/setup.c
909
printk(KERN_INFO "Command line: %s\n", boot_command_line);
arch/x86/kernel/signal.c
373
printk("%s"
arch/x86/kernel/smpboot.c
975
printk(KERN_INFO ".... node %*s#%d, CPUs: ",
arch/x86/kernel/traps.c
553
printk(KERN_EMERG "BUG: %s stack guard page was hit at %px (stack is %px..%px)\n",
arch/x86/kernel/umip.c
131
printk("%s" pr_fmt("%s[%d] ip:%lx sp:%lx: %pV"), log_level, tsk->comm,
arch/x86/kernel/vsmp_64.c
36
printk(KERN_INFO "vSMP CTL: capabilities:0x%08x control:0x%08x\n",
arch/x86/kvm/ioapic.c
649
printk(KERN_WARNING "ioapic: wrong length %d\n", len);
arch/x86/kvm/ioapic.c
674
printk(KERN_WARNING "ioapic: Unsupported size %d\n", len);
arch/x86/kvm/lapic.c
1490
printk(KERN_ERR "TODO: unsupported delivery mode %x\n",
arch/x86/kvm/lapic.c
1820
printk(KERN_ERR "Local APIC read with len = %x, "
arch/x86/kvm/lapic.c
3122
printk(KERN_ERR "malloc apic regs error for vcpu %x\n",
arch/x86/kvm/vmx/vmx.c
6813
printk(KERN_WARNING "%s: Breaking out of NMI-blocked "
arch/x86/mm/dump_pagetables.c
161
printk(KERN_INFO fmt, ##args); \
arch/x86/mm/dump_pagetables.c
170
printk(KERN_CONT fmt, ##args); \
arch/x86/mm/extable.c
310
printk(KERN_CRIT "PNPBIOS fault.. attempting recovery.\n");
arch/x86/mm/fault.c
608
printk(KERN_ALERT "%s: Corrupted page table at address %lx\n",
arch/x86/mm/fault.c
715
printk(KERN_EMERG "Thread overran stack, or stack corrupted\n");
arch/x86/mm/fault.c
722
printk(KERN_DEFAULT "CR2: %016lx\n", address);
arch/x86/mm/fault.c
766
printk("%s%s[%d]: segfault at %lx ip %px sp %px error %lx",
arch/x86/mm/fault.c
776
printk(KERN_CONT " likely on CPU %d (core %d, socket %d)", cpu,
arch/x86/mm/fault.c
780
printk(KERN_CONT "\n");
arch/x86/mm/init.c
255
printk(KERN_INFO "Using GB pages for direct mapping\n");
arch/x86/mm/init_32.c
459
printk(KERN_DEBUG "clearing pte for ram above max_low_pfn: pfn: %lx pmd: %p pmd phys: %lx pte: %p pte phys: %lx\n",
arch/x86/mm/init_32.c
546
printk(KERN_ERR MSG_HIGHMEM_TOO_BIG,
arch/x86/mm/init_32.c
552
printk(KERN_ERR MSG_LOWMEM_TOO_SMALL,
arch/x86/mm/init_32.c
560
printk(KERN_ERR "ignoring highmem size on non-highmem kernel!\n");
arch/x86/mm/init_32.c
584
printk(KERN_WARNING MSG_HIGHMEM_TOO_SMALL,
arch/x86/mm/init_32.c
591
printk(KERN_WARNING "Warning only %ldMB will be used.\n", MAXMEM>>20);
arch/x86/mm/init_32.c
592
printk(KERN_WARNING "Use a HIGHMEM enabled kernel.\n");
arch/x86/mm/init_32.c
597
printk(KERN_WARNING MSG_HIGHMEM_TRIMMED);
arch/x86/mm/init_32.c
621
printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
arch/x86/mm/init_32.c
632
printk(KERN_NOTICE "%ldMB LOWMEM available.\n",
arch/x86/mm/init_32.c
635
printk(KERN_INFO " mapped low ram: 0 - %08lx\n",
arch/x86/mm/init_32.c
637
printk(KERN_INFO " low ram: 0 - %08lx\n", max_low_pfn<<PAGE_SHIFT);
arch/x86/mm/init_32.c
669
printk(KERN_INFO "Checking if this processor honours the WP bit even in supervisor mode...");
arch/x86/mm/init_32.c
675
printk(KERN_CONT "Ok.\n");
arch/x86/mm/init_32.c
679
printk(KERN_CONT "No.\n");
arch/x86/mm/init_32.c
736
printk(KERN_INFO "NX-protecting the kernel data: %luk\n", size >> 10);
arch/x86/mm/init_64.c
1414
printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
arch/x86/mm/init_64.c
1438
printk(KERN_INFO "Testing CPA: undo %lx-%lx\n", start, end);
arch/x86/mm/init_64.c
1441
printk(KERN_INFO "Testing CPA: again\n");
arch/x86/mm/init_64.c
273
printk(KERN_ERR "PAGETABLE BUG #00! %p <-> %p\n",
arch/x86/mm/init_64.c
285
printk(KERN_ERR "PAGETABLE BUG #01! %p <-> %p\n",
arch/x86/mm/init_64.c
297
printk(KERN_ERR "PAGETABLE BUG #02! %p <-> %p\n",
arch/x86/mm/init_64.c
309
printk(KERN_ERR "PAGETABLE BUG #03!\n");
arch/x86/mm/init_64.c
352
printk(KERN_ERR
arch/x86/mm/ioremap.c
204
printk(KERN_WARNING "ioremap: invalid physical address %llx\n",
arch/x86/mm/ioremap.c
237
printk(KERN_ERR "ioremap memtype_reserve failed %d\n", retval);
arch/x86/mm/ioremap.c
243
printk(KERN_ERR
arch/x86/mm/ioremap.c
489
printk(KERN_ERR "iounmap: bad address %p\n", addr);
arch/x86/mm/ioremap.c
874
printk(KERN_WARNING "pmd %p != %p\n",
arch/x86/mm/ioremap.c
876
printk(KERN_WARNING "fix_to_virt(FIX_BTMAP_BEGIN): %08lx\n",
arch/x86/mm/ioremap.c
878
printk(KERN_WARNING "fix_to_virt(FIX_BTMAP_END): %08lx\n",
arch/x86/mm/ioremap.c
881
printk(KERN_WARNING "FIX_BTMAP_END: %d\n", FIX_BTMAP_END);
arch/x86/mm/ioremap.c
882
printk(KERN_WARNING "FIX_BTMAP_BEGIN: %d\n",
arch/x86/mm/numa.c
214
printk(KERN_INFO "%s\n",
arch/x86/mm/numa.c
216
printk(KERN_INFO "Faking a node at [mem %#018Lx-%#018Lx]\n",
arch/x86/mm/numa.c
344
printk(KERN_WARNING
arch/x86/mm/numa.c
363
printk(KERN_WARNING
arch/x86/mm/numa.c
391
printk(KERN_DEBUG "%s cpu %d node %d: mask now %*pbl\n",
arch/x86/mm/numa.c
420
printk(KERN_WARNING
arch/x86/mm/numa.c
427
printk(KERN_WARNING
arch/x86/mm/numa.c
88
printk(KERN_ERR "numa_set_node: invalid cpu# (%d)\n", cpu);
arch/x86/mm/pat/cpa-test.c
103
printk(KERN_ERR "CPA max_pfn_mapped %lu but expected %lu\n",
arch/x86/mm/pat/cpa-test.c
128
printk(KERN_INFO "CPA self-test:\n");
arch/x86/mm/pat/cpa-test.c
132
printk(KERN_ERR "CPA Cannot vmalloc bitmap\n");
arch/x86/mm/pat/cpa-test.c
196
printk(KERN_ERR "CPA %d failed %d\n", i, err);
arch/x86/mm/pat/cpa-test.c
202
printk(KERN_ERR "CPA %lx: bad pte %Lx\n", addr[i],
arch/x86/mm/pat/cpa-test.c
207
printk(KERN_ERR "CPA %lx: unexpected level %d\n",
arch/x86/mm/pat/cpa-test.c
222
printk(KERN_ERR "CPA lookup of %lx failed\n", addr[i]);
arch/x86/mm/pat/cpa-test.c
228
printk(KERN_ERR "CPA reverting failed: %d\n", err);
arch/x86/mm/pat/cpa-test.c
233
printk(KERN_ERR "CPA %lx: bad pte after revert %Lx\n",
arch/x86/mm/pat/cpa-test.c
247
printk(KERN_INFO "ok.\n");
arch/x86/mm/pat/cpa-test.c
74
printk(KERN_ERR
arch/x86/mm/pat/cpa-test.c
94
printk(KERN_INFO
arch/x86/mm/pf_in.c
167
printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode);
arch/x86/mm/pf_in.c
198
printk(KERN_ERR "mmiotrace: Unknown opcode 0x%02x\n", opcode);
arch/x86/mm/pf_in.c
327
printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no);
arch/x86/mm/pf_in.c
388
printk(KERN_ERR "mmiotrace: Error reg no# %d\n", no);
arch/x86/mm/pf_in.c
413
printk(KERN_ERR "mmiotrace: Not a register instruction, opcode "
arch/x86/mm/pf_in.c
441
printk(KERN_ERR "mmiotrace: Error width# %d\n", reg);
arch/x86/mm/pf_in.c
464
printk(KERN_ERR "mmiotrace: Not an immediate instruction, opcode "
arch/x86/mm/pf_in.c
490
printk(KERN_ERR "mmiotrace: not a memory access instruction "
arch/x86/mm/pf_in.c
511
printk(KERN_ERR "mmiotrace: Error: width.\n");
arch/x86/mm/pgtable.c
546
printk(KERN_INFO "Reserving virtual address space above 0x%08lx (rounded to 0x%08lx)\n",
arch/x86/mm/pti.c
642
printk(KERN_WARNING "\n");
arch/x86/mm/pti.c
643
printk(KERN_WARNING "************************************************************\n");
arch/x86/mm/pti.c
644
printk(KERN_WARNING "** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **\n");
arch/x86/mm/pti.c
645
printk(KERN_WARNING "** **\n");
arch/x86/mm/pti.c
646
printk(KERN_WARNING "** You are using 32-bit PTI on a 64-bit PCID-capable CPU. **\n");
arch/x86/mm/pti.c
647
printk(KERN_WARNING "** Your performance will increase dramatically if you **\n");
arch/x86/mm/pti.c
648
printk(KERN_WARNING "** switch to a 64-bit kernel! **\n");
arch/x86/mm/pti.c
649
printk(KERN_WARNING "** **\n");
arch/x86/mm/pti.c
650
printk(KERN_WARNING "** WARNING! WARNING! WARNING! WARNING! WARNING! WARNING! **\n");
arch/x86/mm/pti.c
651
printk(KERN_WARNING "************************************************************\n");
arch/x86/mm/srat.c
49
printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
arch/x86/mm/srat.c
55
printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%04x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
arch/x86/mm/srat.c
84
printk(KERN_ERR "SRAT: Too many proximity domains %x\n", pxm);
arch/x86/mm/srat.c
95
printk(KERN_INFO "SRAT: PXM %u -> APIC 0x%02x -> Node %u skipped apicid that is too big\n", pxm, apic_id, node);
arch/x86/pci/amd_bus.c
175
printk(KERN_DEBUG "node %d link %d: io port [%llx, %llx]\n",
arch/x86/pci/amd_bus.c
207
printk(KERN_INFO "TOM: %016llx aka %lldM\n", end, end>>20);
arch/x86/pci/amd_bus.c
215
printk(KERN_DEBUG "Fam 10h mmconf %pR\n", fam10h_mmconf);
arch/x86/pci/amd_bus.c
245
printk(KERN_DEBUG "node %d link %d: mmio [%llx, %llx]",
arch/x86/pci/amd_bus.c
273
printk(KERN_CONT " ==> [%llx, %llx]", start, endx);
arch/x86/pci/amd_bus.c
279
printk(KERN_CONT " %s [%llx, %llx]", endx ? "and" : "==>", start, end);
arch/x86/pci/amd_bus.c
281
printk(KERN_CONT "%s\n", endx?"":" ==> none");
arch/x86/pci/amd_bus.c
290
printk(KERN_CONT "\n");
arch/x86/pci/amd_bus.c
303
printk(KERN_INFO "TOM2: %016llx aka %lldM\n", end, end>>20);
arch/x86/pci/amd_bus.c
328
printk(KERN_DEBUG "bus: %pR on node %x link %x\n",
arch/x86/pci/amd_bus.c
331
printk(KERN_DEBUG "bus: %02x %pR\n",
arch/x86/pci/broadcom_bus.c
79
printk(KERN_INFO "CNB20LE PCI Host Bridge (domain 0000 %pR)\n", &res);
arch/x86/pci/broadcom_bus.c
82
printk(KERN_INFO "host bridge window %pR\n", &root_res->res);
arch/x86/pci/bus_numa.c
41
printk(KERN_DEBUG "PCI: root bus %02x: hardware-probed resources\n",
arch/x86/pci/bus_numa.c
65
printk(KERN_DEBUG "PCI: root bus %02x: using default resources\n", bus);
arch/x86/pci/common.c
192
printk(KERN_INFO "PCI: %s detected, enabling pci=bfsort.\n", d->ident);
arch/x86/pci/common.c
221
printk(KERN_INFO "%s detected: enabling PCI bus# renumbering"
arch/x86/pci/common.c
229
printk(KERN_INFO "PCI: %s detected, enabling pci=pcie_scan_all\n",
arch/x86/pci/common.c
466
printk(KERN_ERR "PCI: OOM, skipping PCI bus %02x\n", busnum);
arch/x86/pci/common.c
471
printk(KERN_DEBUG "PCI: Probing PCI hardware (bus %02x)\n", busnum);
arch/x86/pci/common.c
493
printk(KERN_DEBUG "PCI: pci_cache_line_size set to %d bytes\n",
arch/x86/pci/common.c
497
printk(KERN_DEBUG "PCI: Unknown cacheline size. Setting to 32 bytes\n");
arch/x86/pci/common.c
504
printk(KERN_WARNING "PCI: System does not support PCI\n");
arch/x86/pci/common.c
86
printk(KERN_INFO "PCI: %s detected, can skip ISA alignment\n", d->ident);
arch/x86/pci/direct.c
267
printk(KERN_INFO "PCI: Using configuration type %d for base access\n",
arch/x86/pci/direct.c
275
printk(KERN_INFO "PCI: Using configuration type 1 "
arch/x86/pci/init.c
42
printk(KERN_ERR
arch/x86/pci/irq.c
1296
printk(KERN_INFO "PCI: Using BIOS for IRQ routing\n");
arch/x86/pci/irq.c
1599
printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
arch/x86/pci/irq.c
1613
printk(KERN_INFO "%s detected - fixing broken IRQ routing\n",
arch/x86/pci/irq.c
1689
printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
arch/x86/pci/irq.c
183
printk(KERN_WARNING "PCI: PIRQ table NOT found at pirqaddr\n");
arch/x86/pci/irq.c
254
printk(KERN_DEBUG "PCI: setting IRQ %u as level-triggered\n", irq);
arch/x86/pci/mmconfig_32.c
134
printk(KERN_INFO "PCI: Using ECAM for extended config space\n");
arch/x86/pci/olpc.c
290
printk(KERN_WARNING "OLPC PCI: Config write to devfn"
arch/x86/pci/olpc.c
304
printk(KERN_INFO "PCI: Using configuration type OLPC XO-1\n");
arch/x86/pci/pcbios.c
127
printk(KERN_WARNING "bios32_service(0x%lx): not present\n", service);
arch/x86/pci/pcbios.c
130
printk(KERN_WARNING "bios32_service(0x%lx): returned 0x%x -- BIOS bug!\n",
arch/x86/pci/pcbios.c
179
printk (KERN_ERR "PCI: BIOS BUG #%x[%08x] found\n",
arch/x86/pci/pcbios.c
183
printk(KERN_INFO "PCI: PCI BIOS revision %x.%02x entry at 0x%lx, last bus=%d\n",
arch/x86/pci/pcbios.c
332
printk("PCI: unsupported BIOS32 revision %d at 0x%p\n",
arch/x86/pci/pcbios.c
338
printk("PCI: BIOS32 entry (0x%p) in high memory, "
arch/x86/pci/pcbios.c
403
printk(KERN_ERR "PCI: Error %02x when fetching IRQ routing table.\n", ret);
arch/x86/pci/pcbios.c
411
printk(KERN_INFO "PCI: Using BIOS Interrupt Routing Table\n");
arch/x86/pci/pcbios.c
63
printk(KERN_INFO "PCI: PCI BIOS area is rw and x. Use pci=nobios if you want it NX.\n");
arch/x86/pci/xen.c
103
printk(KERN_DEBUG "xen: --> pirq=%d -> irq=%d (gsi=%d)\n", map_irq.pirq, irq, gsi);
arch/x86/pci/xen.c
127
printk(KERN_DEBUG "xen: registering gsi %u triggering %d polarity %d\n",
arch/x86/pci/xen.c
138
printk(KERN_INFO "Already setup the GSI :%d\n", gsi);
arch/x86/pci/xen.c
140
printk(KERN_ERR "Failed to setup GSI :%d, err_code:%d\n",
arch/x86/pci/xen.c
500
printk(KERN_INFO "PCI: setting up Xen PCI frontend stub\n");
arch/x86/pci/xen.c
87
printk(KERN_WARNING "xen map irq failed %d\n", rc);
arch/x86/platform/geode/alix.c
115
printk(KERN_INFO "%s: system is recognized as \"%s %s\"\n",
arch/x86/platform/geode/alix.c
64
printk(KERN_NOTICE "%s: forced to skip BIOS test, "
arch/x86/platform/geode/alix.c
93
printk(KERN_INFO
arch/x86/platform/geode/geos.c
52
printk(KERN_INFO "%s: system is recognized as \"%s %s\"\n",
arch/x86/platform/geode/net5501.c
59
printk(KERN_ERR "%s: failed to get rombase\n", KBUILD_MODNAME);
arch/x86/platform/geode/net5501.c
72
printk(KERN_INFO "%s: system is recognized as \"%s\"\n",
arch/x86/platform/iris/iris.c
100
printk(KERN_ERR "Failed to register iris platform driver: %d\n",
arch/x86/platform/iris/iris.c
107
printk(KERN_ERR "Failed to register iris platform device\n");
arch/x86/platform/iris/iris.c
55
printk(KERN_ERR "This machine does not seem to be an Iris. "
arch/x86/platform/iris/iris.c
61
printk(KERN_INFO "Iris power_off handler installed.\n");
arch/x86/platform/iris/iris.c
68
printk(KERN_INFO "Iris power_off handler uninstalled.\n");
arch/x86/platform/iris/iris.c
94
printk(KERN_ERR "The force parameter has not been set to 1."
arch/x86/platform/olpc/olpc-xo1-pm.c
141
printk(KERN_INFO "OLPC XO-1 support registered\n");
arch/x86/platform/olpc/olpc-xo1-pm.c
92
printk(KERN_INFO "OLPC XO-1 power off sequence...\n");
arch/x86/platform/olpc/olpc.c
120
printk(KERN_ERR "olpc-ec: timeout while attempting to "
arch/x86/platform/olpc/olpc.c
126
printk(KERN_ERR "olpc-ec: timeout waiting for EC to "
arch/x86/platform/olpc/olpc.c
145
printk(KERN_ERR "olpc-ec: timeout waiting for EC to read "
arch/x86/platform/olpc/olpc.c
156
printk(KERN_ERR "olpc-ec: timeout waiting for"
arch/x86/platform/olpc/olpc.c
166
printk(KERN_ERR "olpc-ec: timeout waiting for"
arch/x86/platform/olpc/olpc.c
39
printk(KERN_ERR "olpc-ec: invalid argument to "
arch/x86/platform/olpc/olpc.c
42
printk(KERN_DEBUG "olpc-ec: using %d ms delay for EC commands.\n",
arch/x86/platform/olpc/olpc.c
75
printk(KERN_WARNING "olpc-ec: %d: waited %u ms for IBF!\n",
arch/x86/platform/olpc/olpc.c
95
printk(KERN_WARNING "olpc-ec: %d: waited %u ms for OBF!\n",
arch/x86/platform/olpc/olpc_ofw.c
105
printk(KERN_ERR "OFW detected, but cif has invalid address 0x%lx - disabling.\n",
arch/x86/platform/olpc/olpc_ofw.c
113
printk(KERN_INFO "OFW detected in memory, cif @ 0x%lx (reserving top %ldMB)\n",
arch/x86/platform/olpc/olpc_ofw.c
34
printk(KERN_ERR "failed to remap OFW's pgd - disabling OFW!\n");
arch/x86/platform/uv/uv_time.c
350
printk(KERN_INFO "UV RTC clocksource failed rc %d\n", rc);
arch/x86/platform/uv/uv_time.c
352
printk(KERN_INFO "UV RTC clocksource registered freq %lu MHz\n",
arch/x86/platform/uv/uv_time.c
383
printk(KERN_INFO "UV RTC clockevents registered\n");
arch/x86/platform/uv/uv_time.c
389
printk(KERN_INFO "UV RTC clockevents failed rc %d\n", rc);
arch/x86/um/bugs_32.c
27
printk(UM_KERN_INFO "Checking for host processor cmov support...");
arch/x86/um/bugs_32.c
38
printk(UM_KERN_CONT "Yes\n");
arch/x86/um/bugs_32.c
40
printk(UM_KERN_CONT "No\n");
arch/x86/um/bugs_32.c
57
printk(UM_KERN_ERR "SIGILL in init, could not read "
arch/x86/um/bugs_32.c
66
printk(UM_KERN_ERR "SIGILL caused by cmov, which this "
arch/x86/um/bugs_32.c
70
printk(UM_KERN_ERR "SIGILL caused by cmov, which this "
arch/x86/um/bugs_32.c
73
printk(UM_KERN_ERR "Bad value for host_has_cmov (%d)",
arch/x86/um/os-Linux/registers.c
105
printk(UM_KERN_ERR "get_thread_regs - unknown register %d\n",
arch/x86/um/ptrace_32.c
21
printk(KERN_WARNING "arch_switch_tls failed, errno %d, "
arch/x86/um/ptrace_32.c
24
printk(KERN_WARNING "arch_switch_tls failed, errno = EINVAL\n");
arch/x86/um/sysrq_32.c
16
printk("\n");
arch/x86/um/sysrq_32.c
17
printk("EIP: %04lx:[<%08lx>] CPU: %d %s",
arch/x86/um/sysrq_32.c
21
printk(" ESP: %04lx:%08lx", 0xffff & PT_REGS_SS(regs),
arch/x86/um/sysrq_32.c
23
printk(" EFLAGS: %08lx\n %s\n", PT_REGS_EFLAGS(regs),
arch/x86/um/sysrq_32.c
25
printk("EAX: %08lx EBX: %08lx ECX: %08lx EDX: %08lx\n",
arch/x86/um/sysrq_32.c
28
printk("ESI: %08lx EDI: %08lx EBP: %08lx",
arch/x86/um/sysrq_32.c
30
printk(" DS: %04lx ES: %04lx\n",
arch/x86/um/sysrq_64.c
18
printk("\n");
arch/x86/um/sysrq_64.c
20
printk(KERN_INFO "Pid: %d, comm: %.20s %s %s\n", task_pid_nr(current),
arch/x86/um/sysrq_64.c
22
printk(KERN_INFO "RIP: %04lx:%pS\n", PT_REGS_CS(regs) & 0xffff,
arch/x86/um/sysrq_64.c
24
printk(KERN_INFO "RSP: %016lx EFLAGS: %08lx\n", PT_REGS_SP(regs),
arch/x86/um/sysrq_64.c
26
printk(KERN_INFO "RAX: %016lx RBX: %016lx RCX: %016lx\n",
arch/x86/um/sysrq_64.c
28
printk(KERN_INFO "RDX: %016lx RSI: %016lx RDI: %016lx\n",
arch/x86/um/sysrq_64.c
30
printk(KERN_INFO "RBP: %016lx R08: %016lx R09: %016lx\n",
arch/x86/um/sysrq_64.c
32
printk(KERN_INFO "R10: %016lx R11: %016lx R12: %016lx\n",
arch/x86/um/sysrq_64.c
34
printk(KERN_INFO "R13: %016lx R14: %016lx R15: %016lx\n",
arch/x86/um/tls_32.c
251
printk(KERN_ERR "get_tls_entry: task with pid %d got here "
arch/x86/um/tls_32.c
367
printk(KERN_INFO "Host TLS support detected\n");
arch/x86/um/tls_32.c
368
printk(KERN_INFO "Detected host type: ");
arch/x86/um/tls_32.c
371
printk(KERN_CONT "i386");
arch/x86/um/tls_32.c
374
printk(KERN_CONT "x86_64");
arch/x86/um/tls_32.c
377
printk(KERN_CONT " (GDT indexes %d to %d)\n",
arch/x86/um/tls_32.c
381
printk(KERN_ERR " Host TLS support NOT detected! "
arch/x86/um/tls_32.c
46
printk(KERN_ERR "PTRACE_SET_THREAD_AREA failed, err = %d, "
arch/x86/xen/enlighten.c
438
printk(KERN_WARNING "Warning: not enough extra memory regions\n");
arch/x86/xen/enlighten_hvm.c
103
printk(KERN_INFO "Xen version %d.%d.\n", major, minor);
arch/x86/xen/mmu_hvm.c
56
printk(KERN_DEBUG "HVMOP_pagetable_dying not supported\n");
arch/x86/xen/setup.c
1004
printk(KERN_ERR "Failed to set syscall callback: %d\n", ret);
arch/x86/xen/setup.c
1050
printk(KERN_INFO "ACPI in unprivileged domain disabled\n");
arch/x86/xen/smp.c
199
printk(KERN_ERR "xen: vector 0x%x is not implemented\n",
arch/x86/xen/spinlock.c
130
printk(KERN_DEBUG "xen: PV spinlocks disabled\n");
arch/x86/xen/spinlock.c
134
printk(KERN_DEBUG "xen: PV spinlocks enabled\n");
arch/x86/xen/spinlock.c
89
printk("cpu %d spinlock event irq %d\n", cpu, irq);
arch/x86/xen/time.c
357
printk(KERN_INFO "installing Xen timer for CPU %d\n", cpu);
arch/x86/xen/time.c
536
printk(KERN_DEBUG "Xen: using vcpuop timer interface\n");
arch/xtensa/include/asm/pgtable.h
208
printk("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
arch/xtensa/include/asm/pgtable.h
210
printk("%s:%d: bad pgd entry %08lx.\n", __FILE__, __LINE__, pgd_val(e))
arch/xtensa/kernel/irq.c
45
printk("Stack overflow in do_IRQ: %ld\n",
arch/xtensa/kernel/traps.c
556
printk("%s [<%08lx>] %pB\n",
arch/xtensa/kernel/traps.c
567
printk("%sCall Trace:\n", loglvl);
arch/xtensa/kernel/traps.c
620
printk("%sStack:\n", loglvl);
block/blk-ioc.c
390
printk(KERN_ERR "cfq: icq link failed!\n");
block/blk-mq.c
3245
printk(KERN_ERR "%s: over max size limit. (%u > %u)\n",
block/blk-mq.c
3256
printk(KERN_ERR "%s: over max segments limit. (%u > %u)\n",
block/blk-mq.c
3273
printk(KERN_ERR "%s: over max integrity segments limit. (%u > %u)\n",
block/blk-mq.c
844
printk(KERN_INFO "%s: dev %s: flags=%llx\n", msg,
block/blk-mq.c
848
printk(KERN_INFO " sector %llu, nr/cnr %u/%u\n",
block/blk-mq.c
851
printk(KERN_INFO " bio %p, biotail %p, len %u\n",
block/bsg.c
295
printk(KERN_INFO BSG_DESCRIPTION " version " BSG_VERSION
block/early-lookup.c
299
printk("%s%s %10llu %pg %s",
block/early-lookup.c
306
printk("\n");
block/early-lookup.c
308
printk(" driver: %s\n",
block/early-lookup.c
311
printk(" (driver?)\n");
block/elevator.c
531
printk(KERN_INFO "io scheduler %s registered\n", e->elevator_name);
block/genhd.c
250
printk("%s: failed to get major for %s\n",
block/genhd.c
293
printk("register_blkdev: cannot get major %u for %s\n",
block/partitions/atari.c
104
printk( "\nFirst sub-partition in extended partition is not valid!\n" );
block/partitions/atari.c
119
printk("\nID of extended partition is not XGM!\n");
block/partitions/atari.c
127
printk( "\nMaximum number of partitions reached!\n" );
block/partitions/atari.c
97
printk (" block %ld read failed\n", partsect);
block/partitions/core.c
155
printk(KERN_INFO "%s", seq_buf_str(&state->pp_buf));
block/partitions/core.c
170
printk(KERN_INFO "%s", seq_buf_str(&state->pp_buf));
block/partitions/core.c
522
printk(KERN_CONT "truncated\n");
block/partitions/core.c
526
printk(KERN_CONT "enabling native capacity\n");
block/partitions/core.c
542
printk(KERN_WARNING
block/partitions/core.c
551
printk(KERN_WARNING
block/partitions/core.c
570
printk(KERN_ERR " %s: p%d could not be added: %pe\n",
block/partitions/core.c
600
printk(KERN_WARNING "%s: partition table beyond EOD, ",
block/partitions/core.c
624
printk(KERN_WARNING
block/partitions/ldm.c
51
printk("%s%s(): %pV\n", level, function, &vaf);
block/partitions/sgi.c
62
printk(KERN_WARNING "Dev %s SGI disklabel: csum bad, label corrupted\n",
block/partitions/sun.c
85
printk("Dev %s Sun disklabel: Csum bad, label corrupted\n",
crypto/asymmetric_keys/pkcs7_parser.c
228
printk("PKCS7: Unknown OID: [%lu] %s\n",
crypto/asymmetric_keys/pkcs7_parser.c
278
printk("Unsupported digest algo: %u\n", ctx->last_oid);
crypto/asymmetric_keys/pkcs7_parser.c
330
printk("Unsupported pkey algo: %u\n", ctx->last_oid);
crypto/async_tx/async_tx.c
23
printk(KERN_INFO "async_tx: api initialized (async)\n");
crypto/testmgr.c
2783
printk(KERN_ERR "alg: cipher: Test %d failed "
crypto/testmgr.c
3449
printk(KERN_ERR "alg: cipher: Failed to load transform for "
crypto/testmgr.c
3499
printk(KERN_ERR "alg: drbg: could not allocate DRNG handle for "
crypto/testmgr.c
3507
printk(KERN_ERR "alg: drbg: Failed to instantiate rng\n");
crypto/testmgr.c
3517
printk(KERN_ERR "alg: drbg: Failed to reseed rng\n");
crypto/testmgr.c
3525
printk(KERN_ERR "alg: drbg: could not obtain random data for "
crypto/testmgr.c
3533
printk(KERN_ERR "alg: drbg: could not obtain random data for "
crypto/testmgr.c
3558
printk(KERN_ERR "alg: drbg: Test %d failed for %s\n",
crypto/testmgr.c
5710
printk(KERN_INFO "alg: No test for %s (%s)\n", alg, driver);
drivers/accel/qaic/qaic_ras.c
354
printk(KERN_WARNING pr_fmt("Syndrome:\n Bad TLP count %d\n Bad DLLP count %d\n Replay Rollover count %d\n Replay Timeout count %d\n Recv Error count %d\n Internal CE count %d\n"),
drivers/accel/qaic/qaic_ras.c
366
printk(KERN_ERR pr_fmt("Syndrome:\n Index %d\n Address 0x%x\n"),
drivers/accel/qaic/qaic_ras.c
370
printk(KERN_WARNING pr_fmt("Syndrome:\n FC timeout count %d\n Poisoned TLP count %d\n ECRC error count %d\n Unsupported request count %d\n Completer abort count %d\n Completion timeout count %d\n"),
drivers/acpi/acpi_extlog.c
111
printk("%s""Hardware error detected on CPU%d\n", pfx_seq, cpu);
drivers/acpi/apei/ghes.c
1000
printk("%s""Hardware error from APEI Generic Hardware Error Source: %d\n",
drivers/acpi/osl.c
169
printk("%s", buffer);
drivers/acpi/osl.c
171
printk(KERN_CONT "%s", buffer);
drivers/acpi/osl.c
176
printk("%s", buffer);
drivers/acpi/osl.c
178
printk(KERN_CONT "%s", buffer);
drivers/acpi/utils.c
607
printk("%sACPI: %s: %pV", level, path ? path : "<n/a>", &vaf);
drivers/ata/acard-ahci.c
422
printk(KERN_INFO "ahci: SSS flag set, parallel bus scan disabled\n");
drivers/ata/ahci.c
2113
printk(KERN_INFO "ahci: enabling MCP89 AHCI mode\n");
drivers/ata/ahci.c
2693
printk(KERN_INFO
drivers/ata/libata-core.c
6767
printk(KERN_WARNING "ata: failed to extend force table, "
drivers/ata/libata-core.c
6779
printk(KERN_WARNING "ata: failed to parse force "
drivers/ata/libata-core.c
6822
printk(KERN_DEBUG "libata version " DRV_VERSION " loaded.\n");
drivers/ata/pata_cs5530.c
180
printk(KERN_INFO "Palmax PD1100: Disabling DMA on docking port.\n");
drivers/ata/pata_cs5530.c
209
printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
drivers/ata/pata_cs5530.c
213
printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
drivers/ata/pata_legacy.c
133
printk(KERN_ERR "pata_legacy: Too many interfaces.\n");
drivers/ata/pata_optidma.c
395
printk(KERN_WARNING "UDMA not supported in this configuration.\n");
drivers/atm/solos-pci.c
1015
printk(KERN_DEBUG "%s", msg);
drivers/atm/solos-pci.c
1021
printk(KERN_DEBUG "%s", msg);
drivers/atm/solos-pci.c
1023
printk(KERN_DEBUG "\n");
drivers/atm/solos-pci.c
1481
printk(KERN_INFO "Solos PCI Driver Version %s\n", VERSION);
drivers/atm/solos-pci.c
1488
printk(KERN_INFO "Solos PCI Driver %s Unloaded\n", VERSION);
drivers/auxdisplay/cfag12864b.c
310
printk(KERN_ERR CFAG12864B_NAME ": ERROR: "
drivers/auxdisplay/cfag12864b.c
318
printk(KERN_ERR CFAG12864B_NAME ": ERROR: "
drivers/auxdisplay/cfag12864b.c
327
printk(KERN_ERR CFAG12864B_NAME ": ERROR: "
drivers/auxdisplay/cfag12864bfb.c
125
printk(KERN_ERR CFAG12864BFB_NAME ": ERROR: "
drivers/auxdisplay/cfag12864bfb.c
131
printk(KERN_ERR CFAG12864BFB_NAME ": ERROR: "
drivers/base/bus.c
769
printk(KERN_ERR "%s: failed to create module links for %s\n",
drivers/base/bus.c
776
printk(KERN_ERR "%s: uevent attr (%s) failed\n",
drivers/base/bus.c
782
printk(KERN_ERR "%s: driver_add_groups(%s) failed\n",
drivers/base/bus.c
790
printk(KERN_ERR "%s: add_bind_files(%s) failed\n",
drivers/base/core.c
2491
printk("dev_attr_show: %pS/%pS returned bad count\n",
drivers/base/core.c
5022
printk("%s(NULL device *): %pV", level, vaf);
drivers/base/dd.c
793
printk(KERN_DEBUG "probe of %s returned %d after %lld usecs\n",
drivers/block/amiflop.c
1145
printk("raw data @%08lx: %08lx, %08lx ,%08lx, %08lx\n", ptr,
drivers/block/amiflop.c
1166
printk(KERN_INFO "dos_read: no hdr sync on "
drivers/block/amiflop.c
1180
printk("(%3d,%d,%2d,%d) %x\n", hdr.track, hdr.side,
drivers/block/amiflop.c
1185
printk(KERN_INFO "dos_read: MFM_HEADER %04x,%04x\n",
drivers/block/amiflop.c
1190
printk(KERN_INFO "dos_read: MFM_TRACK %d, %d\n",
drivers/block/amiflop.c
1197
printk(KERN_INFO "dos_read: MFM_SIDE %d, %d\n",
drivers/block/amiflop.c
1204
printk(KERN_INFO "dos_read: unknown sector len "
drivers/block/amiflop.c
1209
printk("hdr accepted\n");
drivers/block/amiflop.c
1212
printk(KERN_INFO "dos_read: no data sync on track "
drivers/block/amiflop.c
1222
printk(KERN_INFO "dos_read: no data mark after "
drivers/block/amiflop.c
1234
printk(KERN_INFO "dos_read: MFM_DATA (%d,%d,%d,%d) "
drivers/block/amiflop.c
1237
printk(KERN_INFO "data=(%lx,%lx,%lx,%lx,...)\n",
drivers/block/amiflop.c
1383
printk (KERN_NOTICE "floppy disk write protected\n");
drivers/block/amiflop.c
1408
printk (KERN_NOTICE "floppy disk write protected "
drivers/block/amiflop.c
1468
printk("fd: sector %ld + %d requested for %s\n",
drivers/block/amiflop.c
1477
printk("access to track %d, sector %d, with buffer at "
drivers/block/amiflop.c
1637
printk(KERN_WARNING "fd_probe: unsupported drive type "
drivers/block/amiflop.c
1703
printk(KERN_INFO "fd%d: accessing %s-disk with %s-layout\n",drive,
drivers/block/amiflop.c
1722
printk(KERN_CRIT "floppy_release with fd_ref == 0");
drivers/block/amiflop.c
1879
printk("fd: cannot get chip mem buffer\n");
drivers/block/amiflop.c
1885
printk("fd: cannot get irq for dma\n");
drivers/block/amiflop.c
1890
printk("fd: cannot get irq for timer\n");
drivers/block/amiflop.c
1957
printk (KERN_INFO "amiflop: Setting default df0 to %x\n", n);
drivers/block/amiflop.c
371
printk("get_fdc: drive %d fdc_busy %d fdc_nested %d\n",drive,fdc_busy,fdc_nested);
drivers/block/amiflop.c
384
printk("fd: unmatched rel_fdc\n");
drivers/block/amiflop.c
385
printk("rel_fdc: fdc_busy %d fdc_nested %d\n",fdc_busy,fdc_nested);
drivers/block/amiflop.c
400
printk("selecting %d\n",drive);
drivers/block/amiflop.c
425
printk("deselecting %d\n",drive);
drivers/block/amiflop.c
428
printk(KERN_WARNING "Deselecting drive %d while %d was selected!\n",drive,selected);
drivers/block/amiflop.c
477
printk (KERN_ERR "motor_on failed, turning motor off\n");
drivers/block/amiflop.c
481
printk (KERN_WARNING "DSKRDY not set after 1.5 seconds - assuming drive is spinning notwithstanding\n");
drivers/block/amiflop.c
552
printk (KERN_ERR "fd%d: calibrate failed, turning motor off\n", drive);
drivers/block/amiflop.c
573
printk("seeking drive %d to track %d\n",drive,track);
drivers/block/amiflop.c
668
printk(KERN_NOTICE "fd: drive 0 didn't identify, setting default %08lx\n", (ulong)fd_def_df0);
drivers/block/amiflop.c
756
printk("post_write for drive %ld\n",drive);
drivers/block/amiflop.c
850
printk (KERN_INFO "can't find sync for sector %d\n", scnt);
drivers/block/amiflop.c
862
printk ("(%x,%d,%d,%d) (%lx,%lx,%lx,%lx) %lx %lx\n",
drivers/block/amiflop.c
870
printk(KERN_INFO "MFM_HEADER: %08lx,%08lx\n", hdr.hdrchk, csum);
drivers/block/amiflop.c
876
printk(KERN_INFO "MFM_TRACK: %d, %d\n", hdr.track, unit[drive].track);
drivers/block/amiflop.c
885
printk(KERN_INFO "MFM_DATA: (%x:%d:%d:%d) sc=%d %lx, %lx\n",
drivers/block/amiflop.c
888
printk (KERN_INFO "data=(%lx,%lx,%lx,%lx)\n",
drivers/block/aoe/aoeblk.c
277
printk(KERN_ERR "aoe: disk not up\n");
drivers/block/aoe/aoeblk.c
360
printk(KERN_ERR "aoe: cannot allocate bufpool for %ld.%d\n",
drivers/block/aoe/aoechr.c
176
printk(KERN_INFO "aoe: can't write to that file.\n");
drivers/block/aoe/aoechr.c
293
printk(KERN_ERR "aoe: can't register char device\n");
drivers/block/aoe/aoechr.c
82
printk(KERN_ERR
drivers/block/aoe/aoecmd.c
1551
printk(KERN_ERR "aoe: Warning: shelf address is all ones. "
drivers/block/aoe/aoecmd.c
258
printk(KERN_ERR "aoe: NULL TARGETS!\n");
drivers/block/aoe/aoecmd.c
432
printk(KERN_INFO "aoe: skb alloc failure\n");
drivers/block/aoe/aoecmd.c
970
printk(KERN_INFO
drivers/block/aoe/aoedev.c
426
printk(KERN_ERR
drivers/block/aoe/aoemain.c
68
printk(KERN_ERR "aoe: can't register major\n");
drivers/block/aoe/aoemain.c
71
printk(KERN_INFO "aoe: AoE v%s initialised.\n", VERSION);
drivers/block/aoe/aoemain.c
89
printk(KERN_INFO "aoe: initialisation failure.\n");
drivers/block/aoe/aoenet.c
105
printk(KERN_INFO "aoe: copy from user failed\n");
drivers/block/aoe/aoenet.c
163
printk(KERN_ERR
drivers/block/ataflop.c
1166
printk(KERN_ERR "fd%d: DMA error\n", SelectedDrive );
drivers/block/ataflop.c
1173
printk(KERN_NOTICE "fd%d: is write protected\n", SelectedDrive );
drivers/block/ataflop.c
1192
printk(KERN_INFO "fd%d: Auto-detected floppy type %s\n",
drivers/block/ataflop.c
1216
printk(KERN_ERR "fd%d: sector %d not found (side %d, track %d)\n",
drivers/block/ataflop.c
1221
printk(KERN_ERR "fd%d: CRC error (side %d, track %d, sector %d)\n",
drivers/block/ataflop.c
1226
printk(KERN_ERR "fd%d: lost data (side %d, track %d, sector %d)\n",
drivers/block/ataflop.c
1333
printk(KERN_NOTICE "fd%d: is write protected\n", SelectedDrive );
drivers/block/ataflop.c
1337
printk(KERN_ERR "fd%d: lost data (side %d, track %d)\n",
drivers/block/ataflop.c
1363
printk(KERN_ERR "floppy timeout\n" );
drivers/block/ataflop.c
1467
printk(KERN_ERR "floppy: clear format %p!\n", UDT);
drivers/block/ataflop.c
1534
printk(KERN_ERR "Unknown Device: fd%d\n", drive );
drivers/block/ataflop.c
1551
printk(KERN_WARNING "fd%d: invalid disk format", drive );
drivers/block/ataflop.c
1557
printk(KERN_WARNING "fd%d: unsupported disk format", drive );
drivers/block/ataflop.c
1609
printk (KERN_ERR "floppy%d: found dtp %p name %s!\n",
drivers/block/ataflop.c
1654
printk (KERN_INFO "floppy%d: setting size %d spt %d str %d!\n",
drivers/block/ataflop.c
1685
printk (KERN_INFO "floppy%d: setting %s %p!\n",
drivers/block/ataflop.c
1723
printk (KERN_INFO "floppy%d: blk %d spt %d str %d!\n",
drivers/block/ataflop.c
1886
printk(KERN_INFO "Probing floppy drive(s):\n");
drivers/block/ataflop.c
1890
printk(KERN_INFO "fd%d\n", drive);
drivers/block/ataflop.c
1976
printk(KERN_ERR "floppy_release with fd_ref == 0");
drivers/block/ataflop.c
2116
printk(KERN_ERR "atari_floppy_init: cannot get dma buffer\n");
drivers/block/ataflop.c
2134
printk(KERN_INFO "Atari floppy driver: max. %cD, %strack buffering\n",
drivers/block/ataflop.c
2141
printk(KERN_ERR "atari_floppy_init: cannot register block device\n");
drivers/block/ataflop.c
2167
printk(KERN_ERR "ataflop_setup: no arguments!\n" );
drivers/block/ataflop.c
2171
printk(KERN_ERR "ataflop_setup: too many arguments\n" );
drivers/block/ataflop.c
2175
printk(KERN_ERR "ataflop_setup: bad drive type\n" );
drivers/block/ataflop.c
2184
printk(KERN_ERR "ataflop_setup: bad steprate\n" );
drivers/block/ataflop.c
415
#define DPRINT(a) printk a
drivers/block/ataflop.c
711
printk(KERN_ERR "fd%d: too many errors.\n", SelectedDrive );
drivers/block/ataflop.c
717
printk(KERN_WARNING "fd%d: recalibrating\n", SelectedDrive );
drivers/block/ataflop.c
910
printk(KERN_ERR "fd%d: restore failed\n", SelectedDrive );
drivers/block/ataflop.c
958
printk(KERN_ERR "fd%d: seek error (to track %d)\n",
drivers/block/drbd/drbd_polymorph_printk.h
10
#define __dynamic_pr_debug(D, F, args...) do { (void)(D); if (0) printk(F, ## args); } while (0)
drivers/block/drbd/drbd_polymorph_printk.h
58
printk(level __drbd_printk_ ## struct_name ## _fmt(fmt), \
drivers/block/loop.c
2282
printk(KERN_INFO "loop: module loaded\n");
drivers/block/mtip32xx/mtip32xx.h
111
printk(pr_fmt(format), ##arg);
drivers/block/ps3disk.c
532
printk(KERN_ERR "%s:%u: register_blkdev failed %d\n", __func__,
drivers/block/rbd.c
596
printk(KERN_WARNING "%s: %pV\n", RBD_DRV_NAME, &vaf);
drivers/block/rbd.c
598
printk(KERN_WARNING "%s: %s: %pV\n",
drivers/block/rbd.c
601
printk(KERN_WARNING "%s: image %s: %pV\n",
drivers/block/rbd.c
604
printk(KERN_WARNING "%s: id %s: %pV\n",
drivers/block/rbd.c
607
printk(KERN_WARNING "%s: rbd_dev %p: %pV\n",
drivers/block/rbd.c
615
printk(KERN_ERR "\nAssertion failure in %s() " \
drivers/block/sunvdc.c
214
printk(KERN_ERR PFX "Received unknown msg [%02x:%02x:%04x:%08x]\n",
drivers/block/sunvdc.c
216
printk(KERN_ERR PFX "Resetting connection.\n");
drivers/block/sunvdc.c
264
printk(KERN_ERR PFX "%s: Bogus vdisk_type 0x%x\n",
drivers/block/sunvdc.c
270
printk(KERN_ERR PFX "%s: BLOCK size increased "
drivers/block/sunvdc.c
293
printk(KERN_ERR PFX "%s: Attribute NACK\n", vio->name);
drivers/block/sunvdc.c
499
printk(KERN_ERR PFX "ldc_map_sg() failure, err=%d.\n", err);
drivers/block/sunvdc.c
527
printk(KERN_ERR PFX "vdc_tx_trigger() failure, err=%d\n", err);
drivers/block/sunvdc.c
821
printk(KERN_ERR PFX "VD_OP_GET_DISKGEOM returns "
drivers/block/sunvdc.c
837
printk(KERN_ERR PFX "%s: Could not allocate gendisk.\n",
drivers/block/sunvdc.c
912
printk(KERN_INFO "%s", version);
drivers/block/sunvdc.c
982
printk(KERN_ERR PFX "Port id [%llu] too large.\n",
drivers/block/sunvdc.c
989
printk(KERN_WARNING
drivers/block/swim.c
593
printk(KERN_ERR
drivers/block/swim.c
812
printk(KERN_ERR "Unable to get major %d for SWIM floppy\n",
drivers/block/swim.c
892
printk(KERN_INFO "SWIM device not found !\n");
drivers/block/swim.c
955
printk(KERN_INFO "SWIM floppy driver %s\n", DRIVER_VERSION);
drivers/block/xen-blkfront.c
1057
printk(KERN_WARNING "blkfront: your disk configuration is "
drivers/block/xen-blkfront.c
1089
printk(KERN_WARNING "blkfront: vdevice 0x%x is above the extended range; ignoring\n", info->vdevice);
drivers/block/xen-blkfront.c
1103
printk(KERN_WARNING "blkfront: vdevice 0x%x might conflict with "
drivers/block/xen-blkfront.c
1967
printk(KERN_INFO
drivers/block/xen-blkfront.c
2337
printk(KERN_INFO "Setting capacity to %Lu\n",
drivers/block/z2ram.c
169
printk(KERN_ERR DEVICE_NAME
drivers/block/z2ram.c
192
printk(KERN_ERR DEVICE_NAME
drivers/block/z2ram.c
205
printk(KERN_INFO DEVICE_NAME
drivers/block/z2ram.c
216
printk(KERN_ERR DEVICE_NAME
drivers/block/z2ram.c
225
printk(KERN_INFO DEVICE_NAME
drivers/block/z2ram.c
242
printk(KERN_INFO DEVICE_NAME
drivers/block/z2ram.c
256
printk(KERN_INFO DEVICE_NAME
drivers/block/z2ram.c
270
printk(KERN_NOTICE DEVICE_NAME
drivers/cdrom/gdrom.c
646
printk(KERN_DEBUG "gdrom: Non-fs request ignored\n");
drivers/char/agp/agp.h
38
#define DBG(x,y...) printk (KERN_DEBUG PFX "%s: " x "\n", __func__ , ## y)
drivers/char/agp/alpha-agp.c
193
printk(KERN_INFO PFX "Detected AGP on hose %d\n", agp->hose->index);
drivers/char/agp/amd64-agp.c
256
printk(KERN_ERR PFX "Aperture conflicts with PCI mapping.\n");
drivers/char/agp/amd64-agp.c
749
printk(KERN_INFO PFX "No supported AGP bridge found.\n");
drivers/char/agp/amd64-agp.c
751
printk(KERN_INFO PFX "You can try agp_try_unsupported=1\n");
drivers/char/agp/amd64-agp.c
753
printk(KERN_INFO PFX "You can boot with agp=try_unsupported\n");
drivers/char/agp/backend.c
276
printk (KERN_DEBUG PFX "Erk, registering with no pci_dev!\n");
drivers/char/agp/efficeon-agp.c
112
printk(KERN_DEBUG PFX "efficeon_tlbflush()\n");
drivers/char/agp/efficeon-agp.c
122
printk(KERN_DEBUG PFX "efficeon_cleanup()\n");
drivers/char/agp/efficeon-agp.c
135
printk(KERN_DEBUG PFX "efficeon_configure()\n");
drivers/char/agp/efficeon-agp.c
170
printk(KERN_DEBUG PFX "efficeon_free_gatt_table(%p, %02x, %08x)\n",
drivers/char/agp/efficeon-agp.c
175
printk(KERN_DEBUG PFX "efficeon_free_gatt_table() freed %d pages\n", freed);
drivers/char/agp/efficeon-agp.c
203
printk(KERN_DEBUG PFX "efficeon_create_gatt_table(%d)\n", num_entries);
drivers/char/agp/efficeon-agp.c
244
printk(KERN_DEBUG PFX "efficeon_insert_memory(%lx, %d)\n", pg_start, count);
drivers/char/agp/efficeon-agp.c
290
printk(KERN_DEBUG PFX "efficeon_remove_memory(%lx, %d)\n", pg_start, count);
drivers/char/agp/efficeon-agp.c
357
printk(KERN_ERR PFX "Unsupported Efficeon chipset (device id: %04x)\n",
drivers/char/agp/efficeon-agp.c
362
printk(KERN_INFO PFX "Detected Transmeta Efficeon TM8000 series chipset\n");
drivers/char/agp/efficeon-agp.c
378
printk(KERN_ERR PFX "Unable to Enable PCI device\n");
drivers/char/agp/efficeon-agp.c
391
printk(KERN_ERR PFX "could not assign resource 0\n");
drivers/char/agp/efficeon-agp.c
418
printk(KERN_DEBUG PFX "agp_efficeon_resume()\n");
drivers/char/agp/generic.c
416
printk(KERN_INFO PFX "memory %p is already bound!\n", curr);
drivers/char/agp/generic.c
456
printk(KERN_INFO PFX "memory %p was not bound!\n", curr);
drivers/char/agp/generic.c
484
printk(KERN_INFO PFX "reserved bits set (%x) in mode 0x%x. Fixed.\n",
drivers/char/agp/generic.c
502
printk(KERN_INFO PFX "BIOS bug. AGP bridge claims to only support x4 rate. "
drivers/char/agp/generic.c
507
printk(KERN_INFO PFX "BIOS bug. AGP bridge claims to only support x2 rate. "
drivers/char/agp/generic.c
518
printk(KERN_INFO PFX "%s tried to set rate=x0. Setting to x1 mode.\n", current->comm);
drivers/char/agp/generic.c
588
printk(KERN_INFO PFX "reserved bits set (%x) in mode 0x%x. Fixed.\n",
drivers/char/agp/generic.c
596
printk(KERN_INFO PFX "%s tried to set rate=x0. Setting to AGP3 x4 mode.\n", current->comm);
drivers/char/agp/generic.c
600
printk(KERN_INFO PFX "%s tried to set rate=x%d. Setting to AGP3 x8 mode.\n", current->comm, tmp * 4);
drivers/char/agp/generic.c
629
printk(KERN_INFO PFX "%s passes broken AGP3 flags (%x). Fixed.\n",
drivers/char/agp/generic.c
640
printk(KERN_INFO PFX "%s passes broken AGP2 flags (%x) in AGP3 mode. Fixed.\n",
drivers/char/agp/generic.c
650
printk(KERN_INFO PFX "%s requested AGPx8 but bridge not capable.\n", current->comm);
drivers/char/agp/generic.c
656
printk(KERN_INFO PFX "%s requested AGPx8 but graphic card not capable.\n", current->comm);
drivers/char/agp/generic.c
676
printk(KERN_INFO PFX "No AGP mode specified. Setting to highest mode "
drivers/char/agp/generic.c
681
printk(KERN_INFO PFX "Fell back to AGPx4 mode because ");
drivers/char/agp/generic.c
683
printk(KERN_INFO PFX "bridge couldn't do x8. bridge_agpstat:%x (orig=%x)\n",
drivers/char/agp/generic.c
689
printk(KERN_INFO PFX "graphics card couldn't do x8. vga_agpstat:%x (orig=%x)\n",
drivers/char/agp/generic.c
730
printk(KERN_INFO PFX "Couldn't find an AGP VGA controller.\n");
drivers/char/agp/generic.c
939
printk(KERN_WARNING "Could not set GATT table memory to UC!\n");
drivers/char/agp/nvidia-agp.c
280
printk(KERN_ERR PFX
drivers/char/agp/nvidia-agp.c
358
printk(KERN_INFO PFX "Detected an NVIDIA nForce/nForce2 "
drivers/char/agp/nvidia-agp.c
369
printk(KERN_INFO PFX "Detected NVIDIA nForce chipset\n");
drivers/char/agp/nvidia-agp.c
373
printk(KERN_INFO PFX "Detected NVIDIA nForce2 chipset\n");
drivers/char/agp/nvidia-agp.c
377
printk(KERN_ERR PFX "Unsupported NVIDIA chipset (device id: %04x)\n",
drivers/char/agp/parisc-agp.c
259
printk(KERN_INFO DRVPFX "IO PDIR shared with sba_iommu\n");
drivers/char/agp/parisc-agp.c
270
printk(KERN_ERR DRVPFX "Invalid IOTLB page size "
drivers/char/agp/parisc-agp.c
291
printk(KERN_ERR DRVPFX "No reserved IO PDIR entry found; "
drivers/char/agp/parisc-agp.c
334
printk(KERN_ERR DRVPFX "Invalid capability ID 0x%02x at 0x%x\n",
drivers/char/agp/parisc-agp.c
409
printk(KERN_INFO DRVPFX "No Pluto found, so no AGPGART for you.\n");
drivers/char/agp/parisc-agp.c
417
printk(KERN_INFO DRVPFX "No AGP devices found.\n");
drivers/char/agp/via-agp.c
40
printk(KERN_ERR PFX "Unknown aperture size from AGP bridge (0x%x)\n", temp);
drivers/char/agp/via-agp.c
450
printk (KERN_INFO PFX "Detected VIA %s chipset\n", devs[j].chipset_name);
drivers/char/agp/via-agp.c
466
printk(KERN_INFO PFX "Found KT400 in disguise as a KT266.\n");
drivers/char/apm-emulation.c
173
printk(KERN_ERR "apm: an event queue overflowed\n");
drivers/char/apm-emulation.c
626
printk(KERN_NOTICE "apm: disabled on user request.\n");
drivers/char/bsr.c
182
printk(KERN_ERR "bsr of-node has missing/incorrect property\n");
drivers/char/bsr.c
194
printk(KERN_ERR "Unable to alloc bsr dev\n");
drivers/char/bsr.c
201
printk(KERN_ERR "bsr of-node has invalid reg property, skipping\n");
drivers/char/bsr.c
252
printk(KERN_ERR "device_create failed for %s\n",
drivers/char/bsr.c
305
printk(KERN_ERR "alloc_chrdev_region() failed for bsr\n");
drivers/char/ds1620.c
396
printk(KERN_ERR "therm: unable to register /proc/therm\n");
drivers/char/ds1620.c
402
printk(KERN_INFO "Thermostat: high %i.%i, low %i.%i, "
drivers/char/dsp56k.c
139
printk(KERN_ERR "Failed to register device for \"%s\"\n",
drivers/char/dsp56k.c
146
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
drivers/char/dsp56k.c
151
printk(KERN_ERR "Bogus length %d in image \"%s\"\n",
drivers/char/dsp56k.c
241
printk(KERN_ERR "DSP56k driver: Unknown minor device: %d\n", dev);
drivers/char/dsp56k.c
303
printk(KERN_ERR "DSP56k driver: Unknown minor device: %d\n", dev);
drivers/char/dsp56k.c
401
printk(KERN_ERR "DSP56k driver: Unknown minor device: %d\n", dev);
drivers/char/dsp56k.c
422
printk("DSP56k driver: Unknown minor device: %d\n", dev);
drivers/char/dsp56k.c
474
printk(KERN_ERR "DSP56k driver: Unknown minor device: %d\n", dev);
drivers/char/dsp56k.c
501
printk("DSP56k driver: Hardware not present\n");
drivers/char/dsp56k.c
506
printk("DSP56k driver: Unable to register driver\n");
drivers/char/dsp56k.c
515
printk(banner);
drivers/char/hpet.c
487
printk(KERN_ERR "hpet: IRQ %d is not free\n", irq);
drivers/char/hpet.c
824
printk(KERN_DEBUG "%s: duplicate HPET ignored\n",
drivers/char/hpet.c
850
printk(KERN_WARNING "hpet: number irqs doesn't agree"
drivers/char/hpet.c
870
printk(KERN_INFO "hpet%u: at MMIO 0x%lx, IRQ%s",
drivers/char/hpet.c
874
printk(KERN_CONT "%s %u", i > 0 ? "," : "", hdp->hd_irq[i]);
drivers/char/hpet.c
875
printk(KERN_CONT "\n");
drivers/char/hpet.c
879
printk(KERN_INFO
drivers/char/hpet.c
999
printk("%s: no address or irqs in _CRS\n", __func__);
drivers/char/lp.c
1049
printk(KERN_ERR "lp: unable to get major %d\n", LP_MAJOR);
drivers/char/lp.c
1058
printk(KERN_ERR "lp: unable to register with parport\n");
drivers/char/lp.c
1064
printk(KERN_INFO "lp: driver loaded but no devices found\n");
drivers/char/lp.c
1067
printk(KERN_INFO "lp: (is IEEE 1284 support enabled?)\n");
drivers/char/lp.c
1097
printk(KERN_ERR "lp: bad port specifier `%s'\n", parport[n]);
drivers/char/lp.c
252
printk(KERN_INFO "lp%d out of paper\n", minor);
drivers/char/lp.c
258
printk(KERN_INFO "lp%d off-line\n", minor);
drivers/char/lp.c
264
printk(KERN_INFO "lp%d on fire\n", minor);
drivers/char/lp.c
404
printk(KERN_INFO "lp%d releasing parport\n", minor);
drivers/char/lp.c
527
printk(KERN_INFO "lp%d out of paper\n", minor);
drivers/char/lp.c
532
printk(KERN_INFO "lp%d off-line\n", minor);
drivers/char/lp.c
537
printk(KERN_ERR "lp%d printer error\n", minor);
drivers/char/lp.c
554
printk(KERN_INFO "lp%d: ECP mode\n", minor);
drivers/char/lp.c
589
printk(KERN_DEBUG "lp%d ioctl, cmd: 0x%x, arg: 0x%lx\n", minor, cmd, arg);
drivers/char/lp.c
896
printk(KERN_WARNING "warning: 'lp=0x%x' is deprecated, ignored\n", x);
drivers/char/lp.c
904
printk(KERN_INFO "lp: too many ports, %s ignored.\n",
drivers/char/lp.c
912
printk(KERN_INFO "lp: too many ports, %s ignored.\n",
drivers/char/lp.c
940
printk(KERN_INFO "lp%d: using %s (%s).\n", nr, port->name,
drivers/char/lp.c
948
printk(KERN_INFO "lp%d: console ready\n", CONSOLE_LP);
drivers/char/lp.c
950
printk(KERN_ERR "lp%d: cannot run console on %s\n",
drivers/char/lp.c
970
printk(KERN_INFO "lp: ignoring parallel port (max. %d)\n",LP_NO);
drivers/char/mem.c
755
printk("unable to get major %d for memory devs\n", MEM_MAJOR);
drivers/char/nwbutton.c
217
printk (KERN_INFO "NetWinder Button Driver Version %s (C) Alex Holden "
drivers/char/nwbutton.c
221
printk (KERN_WARNING "nwbutton: Couldn't register device 10, "
drivers/char/nwbutton.c
228
printk (KERN_WARNING "nwbutton: IRQ %d is not free.\n",
drivers/char/nwflash.c
129
printk(KERN_DEBUG "flash_read: flash_read: offset=0x%llx, "
drivers/char/nwflash.c
153
printk("flash_write: offset=0x%lX, buffer=0x%p, count=0x%X.\n",
drivers/char/nwflash.c
196
printk(KERN_DEBUG "flash_write: writing %d block(s) "
drivers/char/nwflash.c
201
printk(KERN_DEBUG "flash_write: erasing block %d.\n", nBlock);
drivers/char/nwflash.c
215
printk(KERN_ERR "flash_write: erase error %x\n", rc);
drivers/char/nwflash.c
219
printk(KERN_DEBUG "flash_write: writing offset %lX, "
drivers/char/nwflash.c
246
printk(KERN_ERR "flash_write: write error %X\n", rc);
drivers/char/nwflash.c
255
printk(KERN_DEBUG "flash_write: written 0x%X bytes OK.\n", written);
drivers/char/nwflash.c
278
printk(KERN_DEBUG "flash_llseek: offset=0x%X, orig=0x%X.\n",
drivers/char/nwflash.c
366
printk(KERN_ERR "flash_erase: err at %p\n", pWritePtr);
drivers/char/nwflash.c
384
printk(KERN_ERR "flash_erase: verify err at %p = %X\n",
drivers/char/nwflash.c
509
printk(KERN_DEBUG "write_block: Retrying write at 0x%X)n",
drivers/char/nwflash.c
519
printk(KERN_ERR "write_block: timeout at 0x%X\n",
drivers/char/nwflash.c
540
printk(KERN_ERR "write_block: verify error at 0x%X (%02X!=%02X)\n",
drivers/char/nwflash.c
599
printk("Flash: incorrect ID 0x%04X.\n", id);
drivers/char/nwflash.c
603
printk("Flash ROM driver v.%s, flash device ID 0x%04X, size %d Mb.\n",
drivers/char/scx200_gpio.c
81
printk(KERN_ERR DRVNAME ": no SCx200 gpio present\n");
drivers/char/sonypi.c
1230
printk(KERN_ERR "sonypi: ioport 0x%.4x busy, using sony-laptop? "
drivers/char/sonypi.c
1273
printk(KERN_INFO "sonypi: detected type%d model, "
drivers/char/sonypi.c
1284
printk(KERN_INFO "sonypi: enabled at irq=%d, port1=0x%x, port2=0x%x\n",
drivers/char/sonypi.c
1289
printk(KERN_INFO "sonypi: device allocated minor is %d\n",
drivers/char/sonypi.c
1300
printk(KERN_WARNING "sonypi: please try the sony-laptop module instead "
drivers/char/sonypi.c
1307
printk(KERN_ERR "sonypi: kfifo_alloc failed\n");
drivers/char/sonypi.c
1328
printk(KERN_ERR "sonypi: pci_enable_device failed\n");
drivers/char/sonypi.c
1354
printk(KERN_ERR "sonypi: failed to request ioports\n");
drivers/char/sonypi.c
1360
printk(KERN_ERR "sonypi: request_irq failed\n");
drivers/char/sonypi.c
1368
printk(KERN_ERR "sonypi: misc_register failed\n");
drivers/char/sonypi.c
1378
printk(KERN_ERR
drivers/char/sonypi.c
1387
printk(KERN_ERR "sonypi: kfifo_alloc failed\n");
drivers/char/sonypi.c
1505
printk(KERN_INFO
drivers/char/sonypi.c
1548
printk(KERN_INFO "sonypi: removed.\n");
drivers/char/sonypi.c
498
printk(KERN_WARNING "sonypi command failed at %s : %s (line %d)\n", __FILE__, __func__, __LINE__); \
drivers/char/sonypi.c
581
printk(KERN_WARNING "ec_write failed\n");
drivers/char/sonypi.c
583
printk(KERN_WARNING "ec_write failed\n");
drivers/char/sonypi.c
585
printk(KERN_WARNING "ec_write failed\n");
drivers/char/sonypi.c
623
printk(KERN_WARNING "ec_write failed\n");
drivers/char/sonypi.c
625
printk(KERN_WARNING "ec_write failed\n");
drivers/char/sonypi.c
627
printk(KERN_WARNING "ec_write failed\n");
drivers/char/sonypi.c
742
printk(KERN_WARNING "sonypi: failed to power on camera\n");
drivers/char/sonypi.c
851
printk(KERN_WARNING
drivers/char/sonypi.c
861
printk(KERN_INFO
drivers/char/tlclk.c
227
printk(KERN_ERR "tlclk: Interrupt can't be reserved.\n");
drivers/char/tlclk.c
788
printk(KERN_ERR "tlclk: can't get major %d.\n", tlclk_major);
drivers/char/tlclk.c
796
printk(KERN_ERR "tlclk: request_region 0x%X failed.\n",
drivers/char/tlclk.c
803
printk(KERN_ERR "telclk_interrupt = 0x%x non-mcpbl0010 hw.\n",
drivers/char/tlclk.c
813
printk(KERN_ERR "tlclk: misc_register returns %d.\n", ret);
drivers/char/ttyprintk.c
206
printk(KERN_ERR "Couldn't register ttyprintk driver\n");
drivers/char/ttyprintk.c
49
printk(TPK_PREFIX "[U] %s\n", tpk_buffer);
drivers/char/uv_mmtimer.c
168
printk(KERN_ERR "remap_pfn_range failed in uv_mmtimer_mmap\n");
drivers/char/uv_mmtimer.c
190
printk(KERN_ERR "%s: Hardware unsupported\n", UV_MMTIMER_NAME);
drivers/char/uv_mmtimer.c
198
printk(KERN_ERR "%s: unable to determine clock frequency\n",
drivers/char/uv_mmtimer.c
208
printk(KERN_ERR "%s: failed to register device\n",
drivers/char/uv_mmtimer.c
213
printk(KERN_INFO "%s: v%s, %ld MHz\n", UV_MMTIMER_DESC,
drivers/clocksource/timer-cs5535.c
144
printk(KERN_ERR DRV_NAME ": Could not allocate MFGPT timer\n");
drivers/clocksource/timer-cs5535.c
151
printk(KERN_ERR DRV_NAME ": Could not set up IRQ %d\n",
drivers/clocksource/timer-cs5535.c
159
printk(KERN_ERR DRV_NAME ": Unable to set up the interrupt.\n");
drivers/clocksource/timer-cs5535.c
169
printk(KERN_INFO DRV_NAME
drivers/clocksource/timer-cs5535.c
181
printk(KERN_ERR DRV_NAME ": Unable to set up the MFGPT clock source\n");
drivers/clocksource/timer-imx-gpt.c
217
printk(KERN_INFO "%s: changing mode\n", __func__);
drivers/clocksource/timer-imx-gpt.c
240
printk(KERN_INFO "%s: changing mode\n", __func__);
drivers/cpufreq/pcc-cpufreq.c
527
printk(KERN_DEBUG "pcc-cpufreq: (v%s) driver loaded with frequency"
drivers/cpufreq/pmac32-cpufreq.c
244
printk(KERN_DEBUG "HID1, before: %x\n", mfspr(SPRN_HID1));
drivers/cpufreq/pmac32-cpufreq.c
303
printk(KERN_DEBUG "HID1, after: %x\n", mfspr(SPRN_HID1));
drivers/cpufreq/sa1110-cpufreq.c
189
printk(KERN_DEBUG "MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n",
drivers/cpufreq/sa1110-cpufreq.c
220
printk(KERN_DEBUG "new dri value = %d\n", dri);
drivers/cpufreq/sa1110-cpufreq.c
353
printk(KERN_DEBUG "SDRAM: tck: %d trcd: %d trp: %d"
drivers/cpufreq/speedstep-lib.c
118
printk(KERN_DEBUG PFX "PM - invalid FSB: 0x%x 0x%x\n",
drivers/cpufreq/speedstep-lib.c
213
printk(KERN_DEBUG PFX "couldn't detect FSB speed. "
drivers/cpuidle/cpuidle-powernv.c
393
printk(KERN_DEBUG "Registration of powernv driver failed.\n");
drivers/cpuidle/cpuidle-powernv.c
405
printk(KERN_DEBUG "powernv_idle_driver registered\n");
drivers/cpuidle/cpuidle-pseries.c
465
printk(KERN_DEBUG "Registration of pseries driver failed.\n");
drivers/cpuidle/cpuidle-pseries.c
477
printk(KERN_DEBUG "pseries_idle_driver registered\n");
drivers/crypto/amcc/crypto4xx_core.c
1234
printk(KERN_ERR "Crypto Function Not supported!\n");
drivers/crypto/bcm/util.h
22
printk(__VA_ARGS__); \
drivers/crypto/bcm/util.h
40
printk(__VA_ARGS__); \
drivers/crypto/caam/desc_constr.h
54
#define PRINT_POS do { printk(KERN_DEBUG "%02d: %s\n", desc_len(desc),\
drivers/crypto/geode-aes.c
201
printk(KERN_ERR "Error allocating fallback algo %s\n", name);
drivers/crypto/geode-aes.c
247
printk(KERN_ERR "Error allocating fallback algo %s\n", name);
drivers/crypto/omap-des.c
12
#define prn(num) printk(#num "=%d\n", num)
drivers/crypto/omap-des.c
13
#define prx(num) printk(#num "=%x\n", num)
drivers/crypto/padlock-aes.c
492
printk(KERN_NOTICE PFX "VIA PadLock detected, but not enabled. Hmm, strange...\n");
drivers/crypto/padlock-aes.c
505
printk(KERN_NOTICE PFX "Using VIA PadLock ACE for AES algorithm.\n");
drivers/crypto/padlock-aes.c
510
printk(KERN_NOTICE PFX "VIA Nano stepping 2 detected: enabling workaround.\n");
drivers/crypto/padlock-aes.c
521
printk(KERN_ERR PFX "VIA PadLock AES initialization failed.\n");
drivers/crypto/padlock-sha.c
169
printk(KERN_WARNING PFX "Fallback driver '%s' could not be loaded!\n",
drivers/crypto/padlock-sha.c
360
printk(KERN_NOTICE PFX "Using VIA PadLock ACE for SHA1/SHA256 algorithms.\n");
drivers/crypto/padlock-sha.c
368
printk(KERN_ERR PFX "VIA PadLock SHA1/SHA256 initialization failed.\n");
drivers/dma/amba-pl08x.c
3067
printk(KERN_WARNING DRIVER_NAME
drivers/dma/bestcomm/bestcomm.c
146
printk(KERN_ERR DRIVER_NAME
drivers/dma/bestcomm/bestcomm.c
152
printk(KERN_ERR DRIVER_NAME
drivers/dma/bestcomm/bestcomm.c
163
printk(KERN_ERR DRIVER_NAME
drivers/dma/bestcomm/bestcomm.c
292
printk(KERN_ERR "DMA: SRAM alloc failed in engine init !\n");
drivers/dma/bestcomm/bestcomm.c
373
printk(KERN_INFO "DMA: MPC52xx BestComm driver\n");
drivers/dma/bestcomm/bestcomm.c
381
printk(KERN_ERR DRIVER_NAME ": "
drivers/dma/bestcomm/bestcomm.c
390
printk(KERN_ERR DRIVER_NAME ": "
drivers/dma/bestcomm/bestcomm.c
407
printk(KERN_ERR DRIVER_NAME ": "
drivers/dma/bestcomm/bestcomm.c
415
printk(KERN_ERR DRIVER_NAME ": "
drivers/dma/bestcomm/bestcomm.c
424
printk(KERN_ERR DRIVER_NAME ": "
drivers/dma/bestcomm/bestcomm.c
436
printk(KERN_INFO "DMA: MPC52xx BestComm engine @%08lx ok !\n",
drivers/dma/bestcomm/bestcomm.c
452
printk(KERN_ERR "DMA: MPC52xx BestComm init failed !\n");
drivers/dma/bestcomm/sram.c
46
printk(KERN_ERR "%s: bcom_sram_init: "
drivers/dma/bestcomm/sram.c
53
printk(KERN_ERR "%s: bcom_sram_init: "
drivers/dma/bestcomm/sram.c
61
printk(KERN_ERR "%s: bcom_sram_init: "
drivers/dma/bestcomm/sram.c
71
printk(KERN_ERR "%s: bcom_sram_init: "
drivers/dma/bestcomm/sram.c
82
printk(KERN_ERR "%s: bcom_sram_init: "
drivers/dma/pl330.c
257
printk("%x:", cmd_line); \
drivers/dma/pl330.c
258
printk(KERN_CONT x); \
drivers/dma/ppc4xx/adma.c
1054
printk(KERN_INFO "%s: Warn: XORcore is running "
drivers/dma/ppc4xx/adma.c
1427
printk("%s: entry_idx %d, src_cnt %d, dst_cnt %d\n",
drivers/dma/ppc4xx/adma.c
1786
printk(KERN_INFO "SPE ADMA Channel only initialized"
drivers/dma/ppc4xx/adma.c
250
printk(KERN_ERR "Unsupported id %d in %s\n", chan->device->id,
drivers/dma/ppc4xx/adma.c
3278
printk(KERN_ERR "Cannot build "
drivers/dma/ppc4xx/adma.c
3562
printk(KERN_ERR "SPE: Freeing %d in use descriptors!\n",
drivers/dma/ppc4xx/adma.c
3686
printk(KERN_ERR "ppc440spe adma%d"
drivers/dma/ppc4xx/adma.c
705
printk(KERN_ERR "%s: next_desc=0x%p; next_desc->phys=0x%llx\n",
drivers/dma/ppc4xx/adma.c
734
printk(KERN_ERR "%s: prev_desc=0x%p; next_desc=0x%p; "
drivers/dma/ppc4xx/adma.c
802
printk(KERN_ERR "%s: len %d > max %d !!\n",
drivers/edac/amd76x_edac.c
283
printk(KERN_WARNING
drivers/edac/amd76x_edac.c
286
printk(KERN_WARNING
drivers/edac/cpc925_edac.c
1040
printk(KERN_INFO "IBM CPC925 EDAC driver " CPC925_EDAC_REVISION "\n");
drivers/edac/cpc925_edac.c
1041
printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc\n");
drivers/edac/cpc925_edac.c
1048
printk(KERN_WARNING "Failed to register %s\n",
drivers/edac/debugfs.c
24
printk(KERN_DEBUG
drivers/edac/e752x_edac.c
1275
printk(KERN_INFO "Contact your BIOS vendor to see if the "
drivers/edac/e752x_edac.c
1365
printk(KERN_WARNING
drivers/edac/e752x_edac.c
1367
printk(KERN_WARNING
drivers/edac/e752x_edac.c
613
printk(KERN_WARNING "%sError %s\n",
drivers/edac/e7xxx_edac.c
506
printk(KERN_WARNING
drivers/edac/e7xxx_edac.c
509
printk(KERN_WARNING
drivers/edac/edac_mc.h
49
printk(level "EDAC " prefix ": " fmt, ##arg)
drivers/edac/edac_mc.h
52
printk(level "EDAC MC%d: " fmt, mci->mc_idx, ##arg)
drivers/edac/edac_mc.h
55
printk(level "EDAC " prefix " MC%d: " fmt, mci->mc_idx, ##arg)
drivers/edac/edac_mc.h
58
printk(level "EDAC DEVICE%d: " fmt, ctl->dev_idx, ##arg)
drivers/edac/edac_mc.h
61
printk(level "EDAC PCI%d: " fmt, ctl->pci_idx, ##arg)
drivers/edac/edac_module.c
82
printk(KERN_ERR "Error registering toplevel EDAC sysfs dir\n");
drivers/edac/i3000_edac.c
328
printk(KERN_ERR "i3000: cannot map mmio space at 0x%lx\n",
drivers/edac/i3000_edac.c
434
printk(KERN_WARNING
drivers/edac/i3000_edac.c
437
printk(KERN_WARNING
drivers/edac/i3200_edac.c
276
printk(KERN_ERR
drivers/edac/i3200_edac.c
284
printk(KERN_ERR "i3200: cannot map mmio space at 0x%llx\n",
drivers/edac/i5000_edac.c
1465
printk(KERN_WARNING
drivers/edac/i5000_edac.c
1468
printk(KERN_WARNING
drivers/edac/i5100_edac.c
1013
printk(KERN_INFO "i5100_edac: ECC not enabled.\n");
drivers/edac/i5400_edac.c
1349
printk(KERN_WARNING
drivers/edac/i5400_edac.c
1352
printk(KERN_WARNING
drivers/edac/i7300_edac.c
1118
printk(KERN_WARNING
drivers/edac/i7300_edac.c
1121
printk(KERN_WARNING
drivers/edac/i82860_edac.c
235
printk(KERN_WARNING
drivers/edac/i82860_edac.c
238
printk(KERN_WARNING
drivers/edac/i82875p_edac.c
446
printk(KERN_WARNING
drivers/edac/i82875p_edac.c
449
printk(KERN_WARNING
drivers/edac/mce_amd.c
1003
printk(KERN_WARNING "Huh? What family is it: 0x%x?!\n", c->x86);
drivers/edac/x38_edac.c
262
printk(KERN_ERR
drivers/edac/x38_edac.c
270
printk(KERN_ERR "x38: cannot map mmio space at 0x%llx\n",
drivers/eisa/eisa-bus.c
444
printk(KERN_INFO "EISA bus registered\n");
drivers/firewire/core-card.c
37
printk(kern_level KBUILD_MODNAME " %s: %pV", \
drivers/firewire/init_ohci1394_dma.c
249
printk(KERN_INFO "init_ohci1394_dma: initializing OHCI-1394"
drivers/firewire/init_ohci1394_dma.c
291
printk(KERN_INFO "init_ohci1394_dma: finished initializing OHCI DMA\n");
drivers/firmware/edd.c
735
printk(KERN_INFO "BIOS EDD facility v%s %s, %d devices found\n",
drivers/firmware/efi/cper-arm.c
107
printk("%stransaction type: %s\n", pfx,
drivers/firmware/efi/cper-arm.c
117
printk("%scache error, operation type: %s\n", pfx,
drivers/firmware/efi/cper-arm.c
123
printk("%sTLB error, operation type: %s\n", pfx,
drivers/firmware/efi/cper-arm.c
129
printk("%sbus error, operation type: %s\n", pfx,
drivers/firmware/efi/cper-arm.c
139
printk("%scache level: %d\n", pfx, level);
drivers/firmware/efi/cper-arm.c
142
printk("%sTLB level: %d\n", pfx, level);
drivers/firmware/efi/cper-arm.c
145
printk("%saffinity level at which the bus error occurred: %d\n",
drivers/firmware/efi/cper-arm.c
153
printk("%sprocessor context corrupted\n", pfx);
drivers/firmware/efi/cper-arm.c
155
printk("%sprocessor context not corrupted\n", pfx);
drivers/firmware/efi/cper-arm.c
162
printk("%sthe error has been corrected\n", pfx);
drivers/firmware/efi/cper-arm.c
164
printk("%sthe error has not been corrected\n", pfx);
drivers/firmware/efi/cper-arm.c
171
printk("%sPC is precise\n", pfx);
drivers/firmware/efi/cper-arm.c
173
printk("%sPC is imprecise\n", pfx);
drivers/firmware/efi/cper-arm.c
180
printk("%sProgram execution can be restarted reliably at the PC associated with the error.\n", pfx);
drivers/firmware/efi/cper-arm.c
191
printk("%sparticipation type: %s\n", pfx,
drivers/firmware/efi/cper-arm.c
200
printk("%srequest timed out\n", pfx);
drivers/firmware/efi/cper-arm.c
207
printk("%saddress space: %s\n", pfx,
drivers/firmware/efi/cper-arm.c
215
printk("%smemory access attributes:0x%x\n", pfx, mem_attributes);
drivers/firmware/efi/cper-arm.c
222
printk("%saccess mode: normal\n", pfx);
drivers/firmware/efi/cper-arm.c
224
printk("%saccess mode: secure\n", pfx);
drivers/firmware/efi/cper-arm.c
238
printk("%sMIDR: 0x%016llx\n", pfx, proc->midr);
drivers/firmware/efi/cper-arm.c
244
printk("%ssection length: %d, CPER size: %d\n",
drivers/firmware/efi/cper-arm.c
246
printk("%ssection length is too %s\n", pfx,
drivers/firmware/efi/cper-arm.c
248
printk("%sfirmware-generated error record is incorrect\n", pfx);
drivers/firmware/efi/cper-arm.c
249
printk("%sERR_INFO_NUM is %d\n", pfx, proc->err_info_num);
drivers/firmware/efi/cper-arm.c
254
printk("%sMultiprocessor Affinity Register (MPIDR): 0x%016llx\n",
drivers/firmware/efi/cper-arm.c
258
printk("%serror affinity level: %d\n", pfx,
drivers/firmware/efi/cper-arm.c
262
printk("%srunning state: 0x%x\n", pfx, proc->running_state);
drivers/firmware/efi/cper-arm.c
263
printk("%sPower State Coordination Interface state: %d\n",
drivers/firmware/efi/cper-arm.c
271
printk("%sError info structure %d:\n", pfx, i);
drivers/firmware/efi/cper-arm.c
273
printk("%snum errors: %d\n", pfx, err_info->multiple_error + 1);
drivers/firmware/efi/cper-arm.c
277
printk("%sfirst error captured\n", newpfx);
drivers/firmware/efi/cper-arm.c
279
printk("%slast error captured\n", newpfx);
drivers/firmware/efi/cper-arm.c
281
printk("%spropagated error captured\n",
drivers/firmware/efi/cper-arm.c
284
printk("%soverflow occurred, error info is incomplete\n",
drivers/firmware/efi/cper-arm.c
293
printk("%serror_type: 0x%02x: %s%s\n", newpfx, err_info->type,
drivers/firmware/efi/cper-arm.c
298
printk("%serror_info: 0x%016llx\n", newpfx,
drivers/firmware/efi/cper-arm.c
305
printk("%svirtual fault address: 0x%016llx\n",
drivers/firmware/efi/cper-arm.c
308
printk("%sphysical fault address: 0x%016llx\n",
drivers/firmware/efi/cper-arm.c
318
printk("%sContext info structure %d:\n", pfx, i);
drivers/firmware/efi/cper-arm.c
320
printk("%ssection length is too small\n", newpfx);
drivers/firmware/efi/cper-arm.c
321
printk("%sfirmware-generated error record is incorrect\n", pfx);
drivers/firmware/efi/cper-arm.c
325
printk("%sInvalid context type: %d (max: %d)\n",
drivers/firmware/efi/cper-arm.c
329
printk("%sregister context type: %s\n", newpfx,
drivers/firmware/efi/cper-arm.c
338
printk("%sVendor specific error info has %u bytes:\n", pfx,
drivers/firmware/efi/cper-x86.c
155
printk("%s%s: %s\n", pfx, str, (check & bit) ? "true" : "false");
drivers/firmware/efi/cper-x86.c
163
printk("%sError Type: %u, %s\n", pfx, err_type,
drivers/firmware/efi/cper-x86.c
198
printk("%sTransaction Type: %u, %s\n", pfx, trans_type,
drivers/firmware/efi/cper-x86.c
212
printk("%sOperation: %u, %s\n", pfx, op,
drivers/firmware/efi/cper-x86.c
217
printk("%sLevel: %llu\n", pfx, CHECK_LEVEL(check));
drivers/firmware/efi/cper-x86.c
240
printk("%sParticipation Type: %u, %s\n", pfx, part_type,
drivers/firmware/efi/cper-x86.c
251
printk("%sAddress Space: %u, %s\n", pfx, addr_space,
drivers/firmware/efi/cper-x86.c
266
printk("%sLocal APIC_ID: 0x%llx\n", pfx, proc->lapic_id);
drivers/firmware/efi/cper-x86.c
269
printk("%sCPUID Info:\n", pfx);
drivers/firmware/efi/cper-x86.c
278
printk("%sError Information Structure %d:\n", pfx, i);
drivers/firmware/efi/cper-x86.c
281
printk("%sError Structure Type: %s\n", newpfx,
drivers/firmware/efi/cper-x86.c
286
printk("%sError Structure Type: %pUl\n", newpfx,
drivers/firmware/efi/cper-x86.c
291
printk("%sCheck Information: 0x%016llx\n", newpfx,
drivers/firmware/efi/cper-x86.c
304
printk("%sTarget Identifier: 0x%016llx\n",
drivers/firmware/efi/cper-x86.c
309
printk("%sRequestor Identifier: 0x%016llx\n",
drivers/firmware/efi/cper-x86.c
314
printk("%sResponder Identifier: 0x%016llx\n",
drivers/firmware/efi/cper-x86.c
319
printk("%sInstruction Pointer: 0x%016llx\n",
drivers/firmware/efi/cper-x86.c
331
printk("%sContext Information Structure %d:\n", pfx, i);
drivers/firmware/efi/cper-x86.c
333
printk("%sRegister Context Type: %s\n", newpfx,
drivers/firmware/efi/cper-x86.c
337
printk("%sRegister Array Size: 0x%04x\n", newpfx,
drivers/firmware/efi/cper-x86.c
342
printk("%sMSR Address: 0x%08x\n", newpfx,
drivers/firmware/efi/cper-x86.c
347
printk("%sMM Register Address: 0x%016llx\n", newpfx,
drivers/firmware/efi/cper-x86.c
353
printk("%sRegister Array:\n", newpfx);
drivers/firmware/efi/cper.c
107
printk("%s\n", buf);
drivers/firmware/efi/cper.c
208
printk("%s""processor_type: %d, %s\n", pfx, proc->proc_type,
drivers/firmware/efi/cper.c
212
printk("%s""processor_isa: %d, %s\n", pfx, proc->proc_isa,
drivers/firmware/efi/cper.c
216
printk("%s""error_type: 0x%02x\n", pfx, proc->proc_error_type);
drivers/firmware/efi/cper.c
222
printk("%s""operation: %d, %s\n", pfx, proc->operation,
drivers/firmware/efi/cper.c
226
printk("%s""flags: 0x%02x\n", pfx, proc->flags);
drivers/firmware/efi/cper.c
231
printk("%s""level: %d\n", pfx, proc->level);
drivers/firmware/efi/cper.c
233
printk("%s""version_info: 0x%016llx\n", pfx, proc->cpu_version);
drivers/firmware/efi/cper.c
235
printk("%s""processor_id: 0x%016llx\n", pfx, proc->proc_id);
drivers/firmware/efi/cper.c
237
printk("%s""target_address: 0x%016llx\n",
drivers/firmware/efi/cper.c
240
printk("%s""requestor_id: 0x%016llx\n",
drivers/firmware/efi/cper.c
243
printk("%s""responder_id: 0x%016llx\n",
drivers/firmware/efi/cper.c
246
printk("%s""IP: 0x%016llx\n", pfx, proc->ip);
drivers/firmware/efi/cper.c
427
printk("%s error_status: %s (0x%016llx)\n",
drivers/firmware/efi/cper.c
431
printk("%s""physical_address: 0x%016llx\n",
drivers/firmware/efi/cper.c
434
printk("%s""physical_address_mask: 0x%016llx\n",
drivers/firmware/efi/cper.c
438
printk("%s%s\n", pfx, rcd_decode_str);
drivers/firmware/efi/cper.c
441
printk("%s""error_type: %d, %s\n", pfx, etype,
drivers/firmware/efi/cper.c
445
printk("%s%s\n", pfx, rcd_decode_str);
drivers/firmware/efi/cper.c
466
printk("%s""port_type: %d, %s\n", pfx, pcie->port_type,
drivers/firmware/efi/cper.c
470
printk("%s""version: %d.%d\n", pfx,
drivers/firmware/efi/cper.c
473
printk("%s""command: 0x%04x, status: 0x%04x\n", pfx,
drivers/firmware/efi/cper.c
477
printk("%s""device_id: %04x:%02x:%02x.%x\n", pfx,
drivers/firmware/efi/cper.c
480
printk("%s""slot: %d\n", pfx,
drivers/firmware/efi/cper.c
482
printk("%s""secondary_bus: 0x%02x\n", pfx,
drivers/firmware/efi/cper.c
484
printk("%s""vendor_id: 0x%04x, device_id: 0x%04x\n", pfx,
drivers/firmware/efi/cper.c
487
printk("%s""class_code: %02x%02x%02x\n", pfx, p[2], p[1], p[0]);
drivers/firmware/efi/cper.c
490
printk("%s""serial number: 0x%04x, 0x%04x\n", pfx,
drivers/firmware/efi/cper.c
493
printk(
drivers/firmware/efi/cper.c
506
printk("%saer_cor_status: 0x%08x, aer_cor_mask: 0x%08x\n",
drivers/firmware/efi/cper.c
508
printk("%saer_uncor_status: 0x%08x, aer_uncor_mask: 0x%08x\n",
drivers/firmware/efi/cper.c
510
printk("%saer_uncor_severity: 0x%08x\n",
drivers/firmware/efi/cper.c
512
printk("%sTLP Header: %08x %08x %08x %08x\n", pfx,
drivers/firmware/efi/cper.c
531
printk("%s""Firmware Error Record Type: %s\n", pfx,
drivers/firmware/efi/cper.c
534
printk("%s""Revision: %d\n", pfx, fw_err->revision);
drivers/firmware/efi/cper.c
538
printk("%s""Record Identifier: %08llx\n", pfx,
drivers/firmware/efi/cper.c
541
printk("%s""Record Identifier: %pUl\n", pfx,
drivers/firmware/efi/cper.c
564
printk("%s""error section length is too small: offset=%d, length=%d\n",
drivers/firmware/efi/cper.c
590
printk("%s%ststamp: %02d%02d-%02d-%02d %02d:%02d:%02d\n", pfx,
drivers/firmware/efi/cper.c
619
printk("%s""Error %d, type: %s\n", pfx, sec_no,
drivers/firmware/efi/cper.c
622
printk("%s""fru_id: %pUl\n", pfx, gdata->fru_id);
drivers/firmware/efi/cper.c
624
printk("%s""fru_text: %.20s\n", pfx, gdata->fru_text);
drivers/firmware/efi/cper.c
630
printk("%ssection_type: %s\n", newpfx, ignore_sections[i].name);
drivers/firmware/efi/cper.c
638
printk("%s""section_type: general processor error\n", newpfx);
drivers/firmware/efi/cper.c
646
printk("%s""section_type: memory error\n", newpfx);
drivers/firmware/efi/cper.c
656
printk("%s""section_type: PCIe error\n", newpfx);
drivers/firmware/efi/cper.c
665
printk("%ssection_type: ARM processor error\n", newpfx);
drivers/firmware/efi/cper.c
676
printk("%ssection_type: IA32/X64 processor error\n", newpfx);
drivers/firmware/efi/cper.c
685
printk("%ssection_type: Firmware Error Record Reference\n",
drivers/firmware/efi/cper.c
695
printk("%ssection_type: CXL Protocol Error\n", newpfx);
drivers/firmware/efi/cper.c
703
printk("%ssection type: unknown, %pUl\n", newpfx, sec_type);
drivers/firmware/efi/cper.c
704
printk("%ssection length: %#x\n", newpfx,
drivers/firmware/efi/cper.c
726
printk("%s%s\n", pfx,
drivers/firmware/efi/cper.c
729
printk("%s""event severity: %s\n", pfx, cper_severity_str(severity));
drivers/firmware/efi/cper.c
98
printk("%s\n", buf);
drivers/firmware/efi/ovmf-debug-log.c
81
printk(KERN_ERR "OVMF debug log: magic mismatch\n");
drivers/firmware/efi/reboot.c
39
printk(KERN_CRIT "efi: %s reset requested but pending "
drivers/firmware/efi/sysfb_efi.c
169
printk(KERN_INFO "efifb: dmi detected %s - framebuffer at 0x%08x "
drivers/firmware/google/gsmi.c
1005
printk(KERN_INFO "gsmi version " DRIVER_VERSION
drivers/firmware/google/gsmi.c
1015
printk(KERN_INFO "gsmi: Failed to create firmware kobj\n");
drivers/firmware/google/gsmi.c
1022
printk(KERN_INFO "gsmi: Failed to setup eventlog");
drivers/firmware/google/gsmi.c
1029
printk(KERN_INFO "gsmi: Failed to add attrs");
drivers/firmware/google/gsmi.c
1036
printk(KERN_INFO "gsmi: Failed to register efivars\n");
drivers/firmware/google/gsmi.c
1047
printk(KERN_INFO "gsmi version " DRIVER_VERSION " loaded\n");
drivers/firmware/google/gsmi.c
158
printk(KERN_ERR "gsmi: out of memory\n");
drivers/firmware/google/gsmi.c
165
printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
drivers/firmware/google/gsmi.c
262
printk(KERN_ERR "gsmi: exec 0x%04x: Invalid parameter\n", cmd);
drivers/firmware/google/gsmi.c
266
printk(KERN_ERR "gsmi: exec 0x%04x: Buffer too small\n", cmd);
drivers/firmware/google/gsmi.c
272
printk(KERN_ERR "gsmi: exec 0x%04x: Not supported\n",
drivers/firmware/google/gsmi.c
277
printk(KERN_ERR "gsmi: exec 0x%04x: Not ready\n", cmd);
drivers/firmware/google/gsmi.c
281
printk(KERN_ERR "gsmi: exec 0x%04x: Device error\n", cmd);
drivers/firmware/google/gsmi.c
285
printk(KERN_ERR "gsmi: exec 0x%04x: Data not found\n", cmd);
drivers/firmware/google/gsmi.c
289
printk(KERN_ERR "gsmi: exec 0x%04x: Log full\n", cmd);
drivers/firmware/google/gsmi.c
298
printk(KERN_ERR "gsmi: exec 0x%04x: Unknown error 0x%04x\n",
drivers/firmware/google/gsmi.c
346
printk(KERN_ERR "gsmi: Get Variable failed\n");
drivers/firmware/google/gsmi.c
409
printk(KERN_ERR "gsmi: Get Next Variable Name failed\n");
drivers/firmware/google/gsmi.c
473
printk(KERN_ERR "gsmi: Set Variable failed\n");
drivers/firmware/google/gsmi.c
523
printk(KERN_ERR "gsmi: Set Event Log failed\n");
drivers/firmware/google/gsmi.c
651
printk(KERN_ERR "gsmi: Log Shutdown Reason failed\n");
drivers/firmware/google/gsmi.c
653
printk(KERN_EMERG "gsmi: Log Shutdown Reason 0x%02x\n",
drivers/firmware/google/gsmi.c
775
printk(KERN_INFO "gsmi: Board is too old\n");
drivers/firmware/google/gsmi.c
912
printk(KERN_ERR "gsmi: unable to register platform driver\n");
drivers/firmware/google/gsmi.c
920
printk(KERN_ERR "gsmi: unable to register platform device\n");
drivers/firmware/google/gsmi.c
951
printk(KERN_ERR "gsmi: failed to allocate name buffer\n");
drivers/firmware/google/gsmi.c
957
printk(KERN_ERR "gsmi: failed to allocate data buffer\n");
drivers/firmware/google/gsmi.c
963
printk(KERN_ERR "gsmi: failed to allocate param buffer\n");
drivers/firmware/iscsi_ibft.c
232
printk(KERN_ERR "iBFT error: We expected the %s " \
drivers/firmware/iscsi_ibft.c
238
printk(KERN_ERR "iBFT error: We expected the %s " \
drivers/firmware/iscsi_ibft.c
453
printk(KERN_ERR "iBFT module supports only revision 1, " \
drivers/firmware/iscsi_ibft.c
462
printk(KERN_ERR "iBFT has incorrect checksum (0x%x)!\n", csum);
drivers/firmware/iscsi_ibft.c
700
printk(KERN_ERR "iBFT has unknown structure type (%d). " \
drivers/firmware/iscsi_ibft.c
760
printk(KERN_ERR "iBFT error: Control header is invalid!\n");
drivers/firmware/iscsi_ibft.c
899
printk(KERN_INFO "No iBFT detected.\n");
drivers/firmware/sysfb_simplefb.c
100
printk(KERN_WARNING "sysfb: VRAM smaller than advertised\n");
drivers/firmware/sysfb_simplefb.c
83
printk(KERN_DEBUG "sysfb: inaccessible VRAM base\n");
drivers/gpu/drm/amd/amdgpu/amdgpu.h
1259
#define DREG32(reg) printk(KERN_INFO "REGISTER: " #reg " : 0x%08X\n", amdgpu_device_rreg(adev, (reg), 0))
drivers/gpu/drm/amd/amdgpu/atom.c
103
printk(" ");
drivers/gpu/drm/amd/amdgpu/atom.c
106
#define DEBUG(...) do if (amdgpu_atom_debug) { printk(KERN_DEBUG __VA_ARGS__); } while (0)
drivers/gpu/drm/amd/amdgpu/atom.c
107
#define SDEBUG(...) do if (amdgpu_atom_debug) { printk(KERN_DEBUG); debug_print_spaces(debug_depth); printk(__VA_ARGS__); } while (0)
drivers/gpu/drm/amd/amdgpu/atom.c
632
printk("ATOM BIOS beeped!\n");
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
5211
printk("Failed to wait all pipes clean\n");
drivers/gpu/drm/amd/amdgpu/gfx_v11_0.c
5255
printk("Failed to wait CP_VMID_RESET to 0\n");
drivers/gpu/drm/amd/pm/legacy-dpm/si_dpm.c
8060
printk("si_cps is NULL\n");
drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_thermal.c
440
printk("[Thermal_EnableAlert] FW CTF Already Enabled!\n");
drivers/gpu/drm/amd/pm/powerplay/hwmgr/vega10_thermal.c
470
printk("[Thermal_EnableAlert] FW CTF Already disabled!\n");
drivers/gpu/drm/amd/ras/ras_mgr/ras_sys.h
38
printk(KERN_ERR fmt, ##__VA_ARGS__); \
drivers/gpu/drm/amd/ras/ras_mgr/ras_sys.h
46
printk(KERN_WARNING fmt, ##__VA_ARGS__); \
drivers/gpu/drm/amd/ras/ras_mgr/ras_sys.h
63
printk(KERN_INFO fmt, ##__VA_ARGS__); \
drivers/gpu/drm/amd/ras/ras_mgr/ras_sys.h
71
printk(KERN_DEBUG fmt, ##__VA_ARGS__); \
drivers/gpu/drm/amd/ras/ras_mgr/ras_sys.h
74
#define RAS_INFO(fmt, ...) printk(KERN_INFO fmt, ##__VA_ARGS__)
drivers/gpu/drm/drm_print.c
201
printk("%s" "[" DRM_NAME ":%ps]%s%s %pV",
drivers/gpu/drm/drm_print.c
204
printk("%s" "[" DRM_NAME "]%s%s %pV",
drivers/gpu/drm/i915/display/intel_flipq.c
221
printk(KERN_CONT " 0x%08x",
drivers/gpu/drm/i915/display/intel_flipq.c
224
printk(KERN_CONT "\n");
drivers/gpu/drm/lima/lima_vm.c
271
printk(KERN_INFO "lima vm pd %03x:%08x\n", idx, pd[idx]);
drivers/gpu/drm/lima/lima_vm.c
277
printk(KERN_INFO " pt %03x:%08x\n", k, pte);
drivers/gpu/drm/msm/adreno/a2xx_gpu.c
276
printk("CP_SCRATCH_REG%d: %u\n", i,
drivers/gpu/drm/msm/adreno/a2xx_gpu.c
453
printk("status: %08x\n",
drivers/gpu/drm/msm/adreno/a3xx_gpu.c
367
printk("CP_SCRATCH_REG%d: %u\n", i,
drivers/gpu/drm/msm/adreno/a3xx_gpu.c
470
printk("status: %08x\n",
drivers/gpu/drm/msm/adreno/a4xx_gpu.c
357
printk("CP_SCRATCH_REG%d: %u\n", i,
drivers/gpu/drm/msm/adreno/a4xx_gpu.c
411
printk("CP | Protected mode error| %s | addr=%x\n",
drivers/gpu/drm/msm/adreno/a4xx_gpu.c
567
printk("status: %08x\n",
drivers/gpu/drm/msm/adreno/a5xx_gpu.c
1018
printk("CP_SCRATCH_REG%d: %u\n", i,
drivers/gpu/drm/msm/adreno/adreno_gpu.c
1040
printk("revision: %u (%"ADRENO_CHIPID_FMT")\n",
drivers/gpu/drm/msm/adreno/adreno_gpu.c
1047
printk("rb %d: fence: %d/%d\n", i,
drivers/gpu/drm/msm/adreno/adreno_gpu.c
1051
printk("rptr: %d\n", get_rptr(adreno_gpu, ring));
drivers/gpu/drm/msm/adreno/adreno_gpu.c
1052
printk("rb wptr: %d\n", get_wptr(ring));
drivers/gpu/drm/msm/adreno/adreno_gpu.c
1066
printk("IO:region %s 00000000 00020000\n", gpu->name);
drivers/gpu/drm/msm/adreno/adreno_gpu.c
1074
printk("IO:R %08x %08x\n", addr<<2, val);
drivers/gpu/drm/nouveau/include/nvkm/core/client.h
31
printk(KERN_##p "nouveau: %s:%08x:%08x: "f, _client->name, \
drivers/gpu/drm/nouveau/nouveau_acpi.c
284
printk("MXM: GUID detected in BIOS\n");
drivers/gpu/drm/nouveau/nvkm/falcon/base.c
100
printk(KERN_CONT " *");
drivers/gpu/drm/nouveau/nvkm/falcon/base.c
162
printk(KERN_INFO "%s %08x ->", type, mem_base);
drivers/gpu/drm/nouveau/nvkm/falcon/base.c
163
printk(KERN_CONT " %08x", *(u32 *)(img + img_base));
drivers/gpu/drm/nouveau/nvkm/falcon/base.c
197
printk(KERN_INFO "%s %08x <-", type, mem_base);
drivers/gpu/drm/nouveau/nvkm/falcon/base.c
198
printk(KERN_CONT " %08x", *(u32 *)(img + img_base));
drivers/gpu/drm/nouveau/nvkm/falcon/base.c
200
printk(KERN_CONT " %04x", tag - 1);
drivers/gpu/drm/nouveau/nvkm/falcon/base.c
94
printk(KERN_INFO "%s %08x <-", type, mem_base);
drivers/gpu/drm/nouveau/nvkm/falcon/base.c
95
printk(KERN_CONT " %08x", *(u32 *)(img + src + i));
drivers/gpu/drm/nouveau/nvkm/falcon/base.c
97
printk(KERN_CONT " <- %08x+%08x", dma_base,
drivers/gpu/drm/nouveau/nvkm/falcon/fw.c
54
printk(KERN_INFO "sig -> %08x:", dst);
drivers/gpu/drm/nouveau/nvkm/falcon/fw.c
55
printk(KERN_CONT " %08x", sig);
drivers/gpu/drm/nouveau/nvkm/subdev/bios/init.c
48
printk(fmt, ##args); \
drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmm.c
1027
printk(KERN_ERR "%016llx %016llx %c%c%c%c%c%c%c%c %p\n",
drivers/gpu/drm/radeon/atom.c
102
#define DEBUG(...) do if (atom_debug) { printk(KERN_DEBUG __VA_ARGS__); } while (0)
drivers/gpu/drm/radeon/atom.c
103
#define SDEBUG(...) do if (atom_debug) { printk(KERN_DEBUG); debug_print_spaces(debug_depth); printk(__VA_ARGS__); } while (0)
drivers/gpu/drm/radeon/atom.c
628
printk("ATOM BIOS beeped!\n");
drivers/gpu/drm/radeon/atom.c
99
printk(" ");
drivers/gpu/drm/radeon/ci_dpm.c
5920
printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
drivers/gpu/drm/radeon/ci_dpm.c
5923
printk("\t\tpower level %d sclk: %u mclk: %u pcie gen: %u pcie lanes: %u\n",
drivers/gpu/drm/radeon/cik.c
5665
printk("VM fault (0x%02x, vmid %d) at page %u, %s from '%s' (0x%08x) (%d)\n",
drivers/gpu/drm/radeon/kv_dpm.c
2651
printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
drivers/gpu/drm/radeon/kv_dpm.c
2654
printk("\t\tpower level %d sclk: %u vddc: %u\n",
drivers/gpu/drm/radeon/ni.c
2651
printk("VM fault (0x%02x, vmid %d) at page %u, %s from %s (%d)\n",
drivers/gpu/drm/radeon/ni_dpm.c
4288
printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
drivers/gpu/drm/radeon/ni_dpm.c
4292
printk("\t\tpower level %d sclk: %u mclk: %u vddc: %u vddci: %u pcie gen: %u\n",
drivers/gpu/drm/radeon/ni_dpm.c
4295
printk("\t\tpower level %d sclk: %u mclk: %u vddc: %u vddci: %u\n",
drivers/gpu/drm/radeon/r600_dpm.c
131
printk("\tcaps:");
drivers/gpu/drm/radeon/r600_dpm.c
144
printk("\tstatus:");
drivers/gpu/drm/radeon/r600_dpm.c
86
printk("\tui class: %s\n", s);
drivers/gpu/drm/radeon/r600_dpm.c
88
printk("\tinternal class:");
drivers/gpu/drm/radeon/radeon_bios.c
177
printk("failed to evaluate ATRM got %s\n", acpi_format_exception(status));
drivers/gpu/drm/radeon/radeon_bios.c
686
printk("BIOS signature incorrect %x %x\n", rdev->bios[0], rdev->bios[1]);
drivers/gpu/drm/radeon/radeon_cs.c
791
printk("\t0x%08x <---\n", radeon_get_ib_value(p, i));
drivers/gpu/drm/radeon/radeon_cs.c
793
printk("\t0x%08x\n", radeon_get_ib_value(p, i));
drivers/gpu/drm/radeon/radeon_pm.c
1126
printk("switching from power state:\n");
drivers/gpu/drm/radeon/radeon_pm.c
1128
printk("switching to power state:\n");
drivers/gpu/drm/radeon/radeon_pm.c
1411
printk("== power state %d ==\n", i);
drivers/gpu/drm/radeon/rs780_dpm.c
944
printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
drivers/gpu/drm/radeon/rs780_dpm.c
945
printk("\t\tpower level 0 sclk: %u vddc_index: %d\n",
drivers/gpu/drm/radeon/rs780_dpm.c
947
printk("\t\tpower level 1 sclk: %u vddc_index: %d\n",
drivers/gpu/drm/radeon/rv6xx_dpm.c
2014
printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
drivers/gpu/drm/radeon/rv6xx_dpm.c
2016
printk("\t\tpower level 0 sclk: %u mclk: %u vddc: %u\n",
drivers/gpu/drm/radeon/rv6xx_dpm.c
2019
printk("\t\tpower level 1 sclk: %u mclk: %u vddc: %u\n",
drivers/gpu/drm/radeon/rv6xx_dpm.c
2022
printk("\t\tpower level 2 sclk: %u mclk: %u vddc: %u\n",
drivers/gpu/drm/radeon/rv770_dpm.c
2441
printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
drivers/gpu/drm/radeon/rv770_dpm.c
2444
printk("\t\tpower level 0 sclk: %u mclk: %u vddc: %u vddci: %u\n",
drivers/gpu/drm/radeon/rv770_dpm.c
2447
printk("\t\tpower level 1 sclk: %u mclk: %u vddc: %u vddci: %u\n",
drivers/gpu/drm/radeon/rv770_dpm.c
2450
printk("\t\tpower level 2 sclk: %u mclk: %u vddc: %u vddci: %u\n",
drivers/gpu/drm/radeon/rv770_dpm.c
2454
printk("\t\tpower level 0 sclk: %u mclk: %u vddc: %u\n",
drivers/gpu/drm/radeon/rv770_dpm.c
2457
printk("\t\tpower level 1 sclk: %u mclk: %u vddc: %u\n",
drivers/gpu/drm/radeon/rv770_dpm.c
2460
printk("\t\tpower level 2 sclk: %u mclk: %u vddc: %u\n",
drivers/gpu/drm/radeon/si.c
4764
printk("\t0x%08x <---\n", ib->ptr[i]);
drivers/gpu/drm/radeon/si.c
4766
printk("\t0x%08x\n", ib->ptr[i]);
drivers/gpu/drm/radeon/si.c
5050
printk("VM fault (0x%02x, vmid %d) at page %u, %s from %s (%d)\n",
drivers/gpu/drm/radeon/sumo_dpm.c
1803
printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
drivers/gpu/drm/radeon/sumo_dpm.c
1806
printk("\t\tpower level %d sclk: %u vddc: %u\n",
drivers/gpu/drm/radeon/trinity_dpm.c
1972
printk("\tuvd vclk: %d dclk: %d\n", rps->vclk, rps->dclk);
drivers/gpu/drm/radeon/trinity_dpm.c
1975
printk("\t\tpower level %d sclk: %u vddc: %u\n",
drivers/i2c/algos/i2c-algo-pca.c
18
printk(KERN_DEBUG fmt, ## args); } while (0)
drivers/i2c/algos/i2c-algo-pca.c
20
printk(KERN_DEBUG fmt, ## args); } while (0)
drivers/i2c/algos/i2c-algo-pca.c
215
printk(KERN_INFO " [%02d] RD %d bytes from %#02x [%#02x, ...]\n",
drivers/i2c/algos/i2c-algo-pca.c
218
printk(KERN_INFO " [%02d] WR %d bytes to %#02x [%#02x%s",
drivers/i2c/algos/i2c-algo-pca.c
22
printk(KERN_DEBUG fmt, ## args); } while (0)
drivers/i2c/algos/i2c-algo-pca.c
222
printk("%#04x%s", msg->buf[i], i == msg->len - 1 ? "" : ", ");
drivers/i2c/algos/i2c-algo-pca.c
223
printk("]\n");
drivers/i2c/algos/i2c-algo-pca.c
382
printk(KERN_INFO "%s: PCA9665 detected.\n", adap->name);
drivers/i2c/algos/i2c-algo-pca.c
385
printk(KERN_INFO "%s: PCA9564 detected.\n", adap->name);
drivers/i2c/algos/i2c-algo-pca.c
428
printk(KERN_WARNING
drivers/i2c/algos/i2c-algo-pca.c
434
printk(KERN_WARNING "%s: "
drivers/i2c/algos/i2c-algo-pca.c
441
printk(KERN_INFO "%s: Clock frequency is %dkHz\n",
drivers/i2c/algos/i2c-algo-pca.c
464
printk(KERN_WARNING "%s: I2C clock speed too high."
drivers/i2c/algos/i2c-algo-pca.c
470
printk(KERN_WARNING "%s: I2C clock speed too low."
drivers/i2c/algos/i2c-algo-pca.c
521
printk(KERN_INFO
drivers/i2c/algos/i2c-algo-pcf.c
175
printk(KERN_DEBUG "i2c-algo-pcf.o: detected and initialized PCF8584.\n");
drivers/i2c/algos/i2c-algo-pcf.c
92
printk(KERN_ERR "Timeout waiting for Bus Busy\n");
drivers/i2c/busses/i2c-elektor.c
137
printk(KERN_ERR "%s: requested I/O region (%#x:2) is "
drivers/i2c/busses/i2c-elektor.c
143
printk(KERN_ERR "%s: remap of I/O region %#x failed\n",
drivers/i2c/busses/i2c-elektor.c
150
printk(KERN_ERR "%s: requested memory region (%#x:2) "
drivers/i2c/busses/i2c-elektor.c
156
printk(KERN_ERR "%s: remap of memory region %#x "
drivers/i2c/busses/i2c-elektor.c
168
printk(KERN_ERR "%s: Request irq%d failed\n",
drivers/i2c/busses/i2c-gpio.c
493
printk(KERN_ERR "i2c-gpio: probe failed: %d\n", ret);
drivers/i2c/busses/i2c-ibm_iic.c
635
printk(KERN_WARNING "ibm-iic: using compatibility value for OPB freq,"
drivers/i2c/busses/i2c-ibm_iic.c
644
printk(KERN_WARNING "ibm-iic: invalid OPB clock frequency %u MHz\n",
drivers/i2c/busses/i2c-ibm_iic.c
71
# define DBG(f,x...) printk(KERN_DEBUG "ibm-iic" f, ##x)
drivers/i2c/busses/i2c-ibm_iic.c
84
printk(KERN_DEBUG "ibm-iic%d: %s\n", dev->idx, header);
drivers/i2c/busses/i2c-ibm_iic.c
85
printk(KERN_DEBUG
drivers/i2c/busses/i2c-mpc.c
376
printk(KERN_ERR
drivers/i2c/busses/i2c-pca-isa.c
41
printk(KERN_DEBUG "*** write %s at %#lx <= %#04x\n", names[reg],
drivers/i2c/busses/i2c-pca-isa.c
53
printk(KERN_DEBUG "*** read %s => %#04x\n", names[reg], res);
drivers/i2c/busses/i2c-pca-isa.c
86
printk(KERN_WARNING DRIVER ": Haven't figured out how to do a reset yet\n");
drivers/i2c/busses/i2c-powermac.c
423
printk(KERN_ERR "i2c-powermac: Adapter %s registration "
drivers/i2c/busses/i2c-powermac.c
429
printk(KERN_INFO "PowerMac i2c bus %s registered\n", adapter->name);
drivers/i2c/busses/i2c-pxa.c
301
printk("%s %08x:", prefix, val);
drivers/i2c/busses/i2c-viapro.c
115
printk("%02x,", inb_p(SMBBLKDAT));
drivers/i2c/busses/i2c-viapro.c
116
printk("\n");
drivers/i2c/busses/i2c-viapro.c
119
printk("%02x,", inb_p(SMBBLKDAT));
drivers/i2c/busses/i2c-viapro.c
120
printk("%02x\n", inb_p(SMBBLKDAT));
drivers/i2c/busses/scx200_acb.c
354
printk(" data:");
drivers/i2c/busses/scx200_acb.c
356
printk(" %02x", buffer[i]);
drivers/i2c/busses/scx200_acb.c
358
printk("\n");
drivers/idle/intel_idle.c
2772
printk(KERN_DEBUG pr_fmt("intel_idle yielding to %s\n"),
drivers/infiniband/core/device.c
235
printk("%s%s: %pV",
drivers/infiniband/core/device.c
238
printk("%s(NULL ib_device): %pV", level, vaf);
drivers/infiniband/hw/mthca/mthca_av.c
230
printk(KERN_DEBUG " [%2x] %08x\n",
drivers/infiniband/hw/mthca/mthca_catas.c
76
printk(KERN_ERR "mthca %s: Reset failed (%d)\n",
drivers/infiniband/hw/mthca/mthca_cmd.c
1794
printk(" %08x\n", be32_to_cpup(mailbox->buf));
drivers/infiniband/hw/mthca/mthca_cmd.c
1797
printk("[%02x] ", i * 4);
drivers/infiniband/hw/mthca/mthca_cmd.c
1798
printk(" %08x",
drivers/infiniband/hw/mthca/mthca_cmd.c
1801
printk("\n");
drivers/infiniband/hw/mthca/mthca_cmd.c
1811
printk(" opt param mask: %08x\n", be32_to_cpup(mailbox->buf));
drivers/infiniband/hw/mthca/mthca_cmd.c
1814
printk(" [%02x] ", i * 4);
drivers/infiniband/hw/mthca/mthca_cmd.c
1815
printk(" %08x",
drivers/infiniband/hw/mthca/mthca_cmd.c
1818
printk("\n");
drivers/infiniband/hw/mthca/mthca_cq.c
920
printk(KERN_ERR "context for CQN %x (cons index %x, next sw %d)\n",
drivers/infiniband/hw/mthca/mthca_cq.c
924
printk(KERN_ERR "[%2x] %08x\n", j * 4, be32_to_cpu(ctx[j]));
drivers/infiniband/hw/mthca/mthca_eq.c
610
printk("[%02x] ", i * 4);
drivers/infiniband/hw/mthca/mthca_eq.c
611
printk(" %08x", be32_to_cpup(mailbox->buf + i * 4));
drivers/infiniband/hw/mthca/mthca_eq.c
613
printk("\n");
drivers/infiniband/hw/mthca/mthca_main.c
1129
printk(KERN_ERR PFX "%s has invalid driver data %lx\n",
drivers/infiniband/hw/mthca/mthca_main.c
1194
printk(KERN_WARNING PFX "Invalid value %d for %s in module parameter.\n",
drivers/infiniband/hw/mthca/mthca_main.c
1196
printk(KERN_WARNING PFX "Corrected %s to %d.\n", name, *pval);
drivers/infiniband/hw/mthca/mthca_main.c
1215
printk(KERN_WARNING PFX "Invalid fmr_reserved_mtts module parameter %d.\n",
drivers/infiniband/hw/mthca/mthca_main.c
1217
printk(KERN_WARNING PFX "(Must be smaller than num_mtt %d)\n",
drivers/infiniband/hw/mthca/mthca_main.c
1220
printk(KERN_WARNING PFX "Corrected fmr_reserved_mtts to %d.\n",
drivers/infiniband/hw/mthca/mthca_main.c
1225
printk(KERN_WARNING PFX "bad log_mtts_per_seg (%d). Using default - %d\n",
drivers/infiniband/hw/mthca/mthca_main.c
903
printk(KERN_INFO PFX "Initializing %s\n",
drivers/infiniband/hw/mthca/mthca_mr.c
480
printk("[%02x] ", i * 4);
drivers/infiniband/hw/mthca/mthca_mr.c
481
printk(" %08x", be32_to_cpu(((__be32 *) mpt_entry)[i]));
drivers/infiniband/hw/mthca/mthca_mr.c
483
printk("\n");
drivers/infiniband/hw/usnic/usnic_log.h
48
printk(lvl "%s:%s:%d: ", DRV_NAME, __func__, \
drivers/infiniband/hw/usnic/usnic_log.h
50
printk(args); \
drivers/infiniband/ulp/ipoib/ipoib.h
792
printk(level "%s: " format, ((struct ipoib_dev_priv *) priv)->dev->name , ## arg)
drivers/infiniband/ulp/iser/iscsi_iser.h
77
printk(KERN_DEBUG PFX "%s: " fmt,\
drivers/infiniband/ulp/isert/ib_isert.h
17
printk(KERN_DEBUG PFX "%s: " fmt,\
drivers/input/gameport/emu10k1-gp.c
49
printk(KERN_ERR "emu10k1-gp: Memory allocation failed\n");
drivers/input/gameport/emu10k1-gp.c
70
printk(KERN_ERR "emu10k1-gp: unable to grab region 0x%x-0x%x\n",
drivers/input/gameport/fm801-gp.c
74
printk(KERN_ERR "fm801-gp: Memory allocation failed\n");
drivers/input/gameport/fm801-gp.c
95
printk(KERN_DEBUG "fm801-gp: unable to grab region 0x%x-0x%x\n",
drivers/input/gameport/lightning.c
212
printk(KERN_ERR "lightning: Memory allocation failed\n");
drivers/input/gameport/lightning.c
271
printk(KERN_INFO "gameport: PDPI Lightning 4 %s card v%d.%d at %#x\n",
drivers/input/gameport/ns558.c
126
printk(KERN_ERR "ns558: Memory allocation failed.\n");
drivers/input/gameport/ns558.c
185
printk(KERN_WARNING "ns558: No i/o ports on a gameport? Weird\n");
drivers/input/gameport/ns558.c
198
printk(KERN_ERR "ns558: Memory allocation failed\n");
drivers/input/joystick/a3d.c
278
printk(KERN_WARNING "a3d.c: Unknown A3D device detected "
drivers/input/joystick/a3d.c
343
printk(KERN_ERR "a3d: Not enough memory for ADC port\n");
drivers/input/joystick/adi.c
319
printk(KERN_WARNING "adi: Short ID packet: reported: %d != read: %d\n", t, adi->ret);
drivers/input/joystick/adi.c
330
printk(KERN_WARNING "adi: Bad data packet length (%d).\n", adi->length);
drivers/input/joystick/adi.c
339
printk(KERN_WARNING "adi: Other than 8-dir POVs not supported yet.\n");
drivers/input/joystick/adi.c
362
printk(KERN_WARNING "adi: Expected length %d != data length %d\n", t, adi->length);
drivers/input/joystick/amijoy.c
67
printk(KERN_ERR "amijoy.c: Can't allocate irq %d\n", IRQ_AMIGA_VERTB);
drivers/input/joystick/analog.c
465
printk(KERN_WARNING "analog.c: Unknown joystick device found "
drivers/input/joystick/analog.c
628
printk(KERN_INFO "analog.c: %d out of %d reads (%d%%) on %s failed\n",
drivers/input/joystick/analog.c
673
printk(KERN_WARNING "analog.c: Bad config for port %d - \"%s\"\n", i, js[i]);
drivers/input/joystick/cobra.c
160
printk(KERN_WARNING "cobra.c: Device %d on %s has the Ext bit set. ID is: %d"
drivers/input/joystick/db9.c
568
printk(KERN_ERR "db9.c: Bad device type %d\n", mode);
drivers/input/joystick/db9.c
575
printk(KERN_ERR "db9.c: specified parport is not bidirectional\n");
drivers/input/joystick/db9.c
584
printk(KERN_ERR "db9.c: parport busy already - lp.o loaded?\n");
drivers/input/joystick/db9.c
602
printk(KERN_ERR "db9.c: Not enough memory for input device\n");
drivers/input/joystick/db9.c
686
printk(KERN_ERR "db9.c: Device type must be specified.\n");
drivers/input/joystick/gf2k.c
272
printk(KERN_WARNING "gf2k.c: Not yet supported joystick on %s. [id: %d type:%s]\n",
drivers/input/joystick/grip_mp.c
29
#define dbg(format, arg...) printk(KERN_ERR __FILE__ ": " format "\n" , ## arg)
drivers/input/joystick/grip_mp.c
396
printk(KERN_INFO "grip_mp: removing %s, slot %d\n",
drivers/input/joystick/grip_mp.c
437
printk(KERN_INFO "Possible non-grip pad/joystick detected.\n");
drivers/input/joystick/grip_mp.c
438
printk(KERN_INFO "Got joy type 0x%x and packet 0x%x.\n", joytype, packet);
drivers/input/joystick/guillemot.c
194
printk(KERN_WARNING "guillemot.c: Unknown joystick on %s. [ %02x%02x:%04x, ver %d.%02d ]\n",
drivers/input/joystick/guillemot.c
249
printk(KERN_INFO "guillemot.c: Failed %d reads out of %d on %s\n", guillemot->reads, guillemot->bads, guillemot->phys);
drivers/input/joystick/interact.c
223
printk(KERN_WARNING "interact.c: Unknown joystick on %s. [len %d d0 %08x d1 %08x i2 %08x]\n",
drivers/input/joystick/joydump.c
106
printk(KERN_INFO "joydump: >------------------ DATA -----------------<\n");
drivers/input/joystick/joydump.c
107
printk(KERN_INFO "joydump: | index: %3d delta: %3d us data: ", 0, 0);
drivers/input/joystick/joydump.c
109
printk("%d", (dump->data >> j) & 1);
drivers/input/joystick/joydump.c
110
printk(" |\n");
drivers/input/joystick/joydump.c
114
printk(KERN_INFO "joydump: | index: %3d delta: %3d us data: ",
drivers/input/joystick/joydump.c
117
printk("%d", (dump->data >> j) & 1);
drivers/input/joystick/joydump.c
118
printk(" |\n");
drivers/input/joystick/joydump.c
123
printk(KERN_INFO "joydump: `------------------- END -----------------'\n");
drivers/input/joystick/joydump.c
39
printk(KERN_INFO "joydump: ,------------------ START ----------------.\n");
drivers/input/joystick/joydump.c
40
printk(KERN_INFO "joydump: | Dumping: %30s |\n", gameport->phys);
drivers/input/joystick/joydump.c
41
printk(KERN_INFO "joydump: | Speed: %28d kHz |\n", gameport->speed);
drivers/input/joystick/joydump.c
45
printk(KERN_INFO "joydump: | Raw mode not available - trying cooked. |\n");
drivers/input/joystick/joydump.c
49
printk(KERN_INFO "joydump: | Cooked not available either. Failing. |\n");
drivers/input/joystick/joydump.c
50
printk(KERN_INFO "joydump: `------------------- END -----------------'\n");
drivers/input/joystick/joydump.c
57
printk(KERN_INFO "joydump: | Axis %d: %4d. |\n", i, axes[i]);
drivers/input/joystick/joydump.c
58
printk(KERN_INFO "joydump: | Buttons %02x. |\n", buttons);
drivers/input/joystick/joydump.c
59
printk(KERN_INFO "joydump: `------------------- END -----------------'\n");
drivers/input/joystick/joydump.c
66
printk(KERN_INFO "joydump: no memory for testing\n");
drivers/input/joystick/sidewinder.c
181
printk(KERN_DEBUG "sidewinder.c: Read %d triplets. [", i);
drivers/input/joystick/sidewinder.c
182
for (j = 0; j < i; j++) printk("%d", buf[j]);
drivers/input/joystick/sidewinder.c
183
printk("]\n");
drivers/input/joystick/sidewinder.c
417
printk(KERN_WARNING "sidewinder.c: Joystick in wrong mode on %s"
drivers/input/joystick/sidewinder.c
44
#define dbg(format, arg...) printk(KERN_DEBUG __FILE__ ": " format "\n" , ## arg)
drivers/input/joystick/sidewinder.c
443
printk(KERN_INFO "sidewinder.c: No more trouble on %s"
drivers/input/joystick/sidewinder.c
456
printk(KERN_INFO "sidewinder.c: Many bit errors on %s"
drivers/input/joystick/sidewinder.c
464
printk(KERN_WARNING "sidewinder.c: Too many bit errors on %s"
drivers/input/joystick/sidewinder.c
514
printk(KERN_INFO "sidewinder.c: %s packet, %d bits. [", name, length);
drivers/input/joystick/sidewinder.c
516
printk("%x", (int)sw_get_bits(buf, i << 2, 4, bits));
drivers/input/joystick/sidewinder.c
517
printk("]\n");
drivers/input/joystick/sidewinder.c
702
printk(KERN_WARNING "sidewinder.c: unknown joystick device detected "
drivers/input/joystick/spaceball.c
118
printk(KERN_ERR "spaceball: Device error. [%s]\n", spaceball->data + 1);
drivers/input/joystick/spaceball.c
123
printk(KERN_ERR "spaceball: Bad command. [%s]\n", spaceball->data + 1);
drivers/input/joystick/spaceorb.c
100
printk(KERN_ERR "spaceorb: Device error. [ ");
drivers/input/joystick/spaceorb.c
101
for (i = 0; i < 7; i++) if (data[1] & (1 << i)) printk("%s ", spaceorb_errors[i]);
drivers/input/joystick/spaceorb.c
102
printk("]\n");
drivers/input/joystick/spaceorb.c
72
printk(KERN_INFO "input: %s [%s] is %s\n",
drivers/input/joystick/turbografx.c
175
printk(KERN_ERR "turbografx.c: Not enough memory\n");
drivers/input/joystick/turbografx.c
189
printk(KERN_ERR "turbografx.c: Invalid number of buttons %d\n", n_buttons[i]);
drivers/input/joystick/turbografx.c
195
printk(KERN_ERR "turbografx.c: Not enough memory for input device\n");
drivers/input/joystick/turbografx.c
229
printk(KERN_ERR "turbografx.c: No valid devices specified\n");
drivers/input/joystick/turbografx.c
287
printk(KERN_ERR "turbografx.c: at least one joystick must be specified\n");
drivers/input/keyboard/amikbd.c
189
printk(amikbd_messages[scancode - 0x78]);
drivers/input/keyboard/atakbd.c
176
printk(KERN_INFO "atakbd: unhandled scancode %x\n", scancode);
drivers/input/keyboard/hil_kbd.c
133
printk(KERN_WARNING PREFIX "Device sent unknown record %x\n", p);
drivers/input/keyboard/hil_kbd.c
214
printk(KERN_WARNING PREFIX
drivers/input/keyboard/hil_kbd.c
269
printk(KERN_WARNING PREFIX "errored HIL packet\n");
drivers/input/keyboard/hil_kbd.c
349
printk(KERN_INFO PREFIX "HIL keyboard found (did = 0x%02x, lang = %s)\n",
drivers/input/keyboard/hil_kbd.c
435
printk(KERN_INFO PREFIX
drivers/input/keyboard/hil_kbd.c
438
printk(KERN_INFO PREFIX
drivers/input/keyboard/hil_kbd.c
513
printk(KERN_INFO PREFIX
drivers/input/keyboard/hilkbd.c
216
printk(KERN_ERR "HIL: Can't get IRQ\n");
drivers/input/keyboard/hilkbd.c
229
printk(KERN_WARNING "HIL: timed out, assuming no keyboard present\n");
drivers/input/keyboard/hilkbd.c
235
printk(KERN_WARNING "HIL: no keyboard present\n");
drivers/input/keyboard/hilkbd.c
238
printk(KERN_INFO "HIL: keyboard found at id %d\n", kbid);
drivers/input/keyboard/hilkbd.c
265
printk(KERN_ERR "HIL: Can't register device\n");
drivers/input/keyboard/hilkbd.c
269
printk(KERN_INFO "input: %s, ID %d at 0x%08lx (irq %d) found and attached\n",
drivers/input/keyboard/hilkbd.c
303
printk(KERN_WARNING "HIL: IRQ not found for HIL bus at 0x%p\n",
drivers/input/keyboard/hilkbd.c
312
printk(KERN_INFO "Found HIL bus at 0x%08lx, IRQ %d\n", hil_base, hil_irq);
drivers/input/keyboard/hilkbd.c
363
printk(KERN_ERR "HIL: hardware register was not found\n");
drivers/input/keyboard/hilkbd.c
368
printk(KERN_ERR "HIL: IOPORT region already used\n");
drivers/input/keyboard/lkkbd.c
371
printk(KERN_ERR
drivers/input/keyboard/lkkbd.c
374
printk(KERN_ERR "lkkbd: keyboard ID'ed as:");
drivers/input/keyboard/lkkbd.c
376
printk(" 0x%02x", lk->id[i]);
drivers/input/keyboard/lkkbd.c
377
printk("\n");
drivers/input/keyboard/lkkbd.c
381
printk(KERN_INFO "lkkbd: keyboard on %s identified as: %s\n",
drivers/input/keyboard/lkkbd.c
393
printk(KERN_ERR "lkkbd: Stuck key on keyboard at %s\n",
drivers/input/keyboard/lkkbd.c
398
printk(KERN_ERR
drivers/input/keyboard/lkkbd.c
404
printk(KERN_ERR
drivers/input/keyboard/lkkbd.c
414
printk(KERN_ERR
drivers/input/keyboard/lkkbd.c
476
printk(KERN_WARNING
drivers/input/keyboard/lkkbd.c
552
printk(KERN_ERR "%s(): Got unknown type %d, code %d, value %d\n",
drivers/input/keyboard/lkkbd.c
92
#define DBG(x...) printk(x)
drivers/input/keyboard/locomokbd.c
239
printk(KERN_ERR "locomokbd: Can't acquire access to io memory for keyboard\n");
drivers/input/keyboard/locomokbd.c
282
printk(KERN_ERR "locomokbd: Can't get irq for keyboard\n");
drivers/input/keyboard/newtonkbd.c
59
printk(KERN_INFO "input: %s on %s\n", nkbd->dev->name, serio->phys);
drivers/input/keyboard/omap-keypad.c
111
printk(KERN_INFO "omap-keypad: key %d-%d %s\n", col,
drivers/input/keyboard/omap-keypad.c
189
printk(KERN_ERR "No rows, cols or keymap_data from pdata\n");
drivers/input/keyboard/omap-keypad.c
244
printk(KERN_ERR "Unable to register omap-keypad input device\n");
drivers/input/keyboard/sunkbd.c
121
printk(KERN_WARNING
drivers/input/keyboard/xtkbd.c
59
printk(KERN_WARNING "xtkbd.c: Unknown key (scancode %#x) %s.\n",
drivers/input/misc/cm109.c
887
printk(KERN_INFO KBUILD_MODNAME ": "
drivers/input/misc/cm109.c
891
printk(KERN_INFO KBUILD_MODNAME ": "
drivers/input/misc/cm109.c
895
printk(KERN_INFO KBUILD_MODNAME ": "
drivers/input/misc/cm109.c
899
printk(KERN_INFO KBUILD_MODNAME ": "
drivers/input/misc/cm109.c
902
printk(KERN_ERR KBUILD_MODNAME ": "
drivers/input/misc/cm109.c
922
printk(KERN_INFO KBUILD_MODNAME ": "
drivers/input/misc/hp_sdc_rtc.c
363
printk(KERN_INFO "HP i8042 SDC + MSM-58321 RTC support loaded "
drivers/input/misc/hp_sdc_rtc.c
373
printk(KERN_INFO "HP i8042 SDC + MSM-58321 RTC support unloaded\n");
drivers/input/misc/m68kspkr.c
107
printk(KERN_INFO "m68kspkr: no lowlevel beep support\n");
drivers/input/misc/powermate.c
174
printk(KERN_ERR "powermate: unknown update required");
drivers/input/misc/powermate.c
190
printk(KERN_ERR "powermate: usb_submit_urb(config) failed");
drivers/input/misc/powermate.c
199
printk(KERN_ERR "powermate: config urb returned %d\n", urb->status);
drivers/input/misc/powermate.c
350
printk(KERN_WARNING "powermate: unknown product id %04x\n",
drivers/input/misc/powermate.c
373
printk(KERN_WARNING "powermate: Expected payload of %d--%d bytes, found %d bytes!\n",
drivers/input/misc/uinput.c
333
printk(KERN_DEBUG "%s: write device info first\n", UINPUT_NAME);
drivers/input/misc/uinput.c
355
printk(KERN_DEBUG "%s: ff_effects_max should be non-zero when FF_BIT is set\n",
drivers/input/misc/uinput.c
428
printk(KERN_DEBUG
drivers/input/misc/uinput.c
435
printk(KERN_DEBUG
drivers/input/misc/uinput.c
449
printk(KERN_DEBUG
drivers/input/misc/wistron_btns.c
101
printk(KERN_ERR "wistron_btns: BIOS entry point not found\n");
drivers/input/misc/wistron_btns.c
1016
printk(KERN_ERR "wistron_btns: Keymap unknown\n");
drivers/input/misc/wistron_btns.c
1022
printk(KERN_ERR "wistron_btns: System unknown\n");
drivers/input/misc/wistron_btns.c
107
printk(KERN_DEBUG
drivers/input/misc/wistron_btns.c
1141
printk(KERN_NOTICE
drivers/input/misc/wistron_btns.c
118
printk(KERN_ERR
drivers/input/misc/wistron_btns.c
1202
printk(KERN_WARNING "Untested laptop multimedia keys, "
drivers/input/misc/wistron_btns.c
128
printk(KERN_ERR "wistron_btns: Can't map BIOS data\n");
drivers/input/mouse/appletouch.c
221
printk(KERN_DEBUG "appletouch: %s", msg); \
drivers/input/mouse/appletouch.c
223
printk(" %02x", tab[__i]); \
drivers/input/mouse/appletouch.c
224
printk("\n"); \
drivers/input/mouse/appletouch.c
230
printk(KERN_DEBUG format, ##a); \
drivers/input/mouse/appletouch.c
611
printk(KERN_DEBUG "appletouch: "
drivers/input/mouse/appletouch.c
731
printk(KERN_DEBUG "appletouch: X: %3d Y: %3d "
drivers/input/mouse/bcm5974.c
160
{ if (debug >= level) printk(KERN_DEBUG format, ##a); }
drivers/input/mouse/rpcmouse.c
87
printk(KERN_ERR "rpcmouse: unable to allocate VSYNC interrupt\n");
drivers/input/mouse/sermouse.c
171
printk(KERN_WARNING
drivers/input/mouse/vsxxxaa.c
124
printk(KERN_ERR "%s on %s: Dropping a byte of full buffer.\n",
drivers/input/mouse/vsxxxaa.c
154
printk(KERN_INFO
drivers/input/mouse/vsxxxaa.c
175
printk(KERN_ERR
drivers/input/mouse/vsxxxaa.c
352
printk(KERN_INFO "Your %s on %s reports error=0x%02x\n",
drivers/input/mouse/vsxxxaa.c
361
printk(KERN_NOTICE
drivers/input/mouse/vsxxxaa.c
389
printk(KERN_ERR "%s on %s: Dropping a byte to regain "
drivers/input/mouse/vsxxxaa.c
424
printk(KERN_ERR "Dropping %d bytes now...\n",
drivers/input/mouse/vsxxxaa.c
79
#define DBG(x...) printk(x)
drivers/input/rmi4/rmi_f03.c
191
printk(KERN_INFO "serio: %s port at %s\n",
drivers/input/serio/ambakmi.c
81
printk(KERN_ERR "kmi: failed to claim IRQ%d\n", kmi->irq);
drivers/input/serio/gscps2.c
151
printk(KERN_DEBUG PFX "timeout - could not write byte %#x\n", data);
drivers/input/serio/gscps2.c
298
printk(KERN_DEBUG PFX "sending byte %#x failed.\n", data);
drivers/input/serio/gscps2.c
390
printk(KERN_WARNING PFX "Unsupported PS/2 port at 0x%08lx (id=%d) ignored\n",
drivers/input/serio/hil_mlc.c
252
printk(KERN_DEBUG PREFIX "new in slot %i\n", rc);
drivers/input/serio/hil_mlc.c
264
printk(KERN_DEBUG PREFIX "same in slot %i\n", rc);
drivers/input/serio/hil_mlc.c
271
printk(KERN_ERR PREFIX "Residual device slots exhausted, close some serios!\n");
drivers/input/serio/hil_mlc.c
421
printk(KERN_INFO PREFIX "Device name gotten: %16s\n",
drivers/input/serio/hil_mlc.c
628
printk(KERN_DEBUG PREFIX "z%i \n {%i}", doze, mlc->seidx);
drivers/input/serio/hil_mlc.c
782
printk(KERN_DEBUG PREFIX " + ");
drivers/input/serio/hp_sdc.c
1005
printk(KERN_WARNING PREFIX "HP SDC driver disabled by no_hpsdc=1.\n");
drivers/input/serio/hp_sdc.c
1013
printk(KERN_WARNING PREFIX "Error registering SDC with system bus tree.\n");
drivers/input/serio/hp_sdc.c
1030
printk(KERN_WARNING PREFIX "No SDC found.\n");
drivers/input/serio/hp_sdc.c
1055
printk(KERN_WARNING PREFIX "Error reading config byte.\n");
drivers/input/serio/hp_sdc.c
1062
printk(KERN_INFO PREFIX "New style SDC\n");
drivers/input/serio/hp_sdc.c
1071
printk(KERN_WARNING PREFIX "Error reading extended config byte.\n");
drivers/input/serio/hp_sdc.c
1076
printk(KERN_INFO PREFIX "Revision: %s\n", str);
drivers/input/serio/hp_sdc.c
1078
printk(KERN_INFO PREFIX "TI SN76494 beeper present\n");
drivers/input/serio/hp_sdc.c
1080
printk(KERN_INFO PREFIX "OKI MSM-58321 BBRTC present\n");
drivers/input/serio/hp_sdc.c
1081
printk(KERN_INFO PREFIX "Spunking the self test register to force PUP "
drivers/input/serio/hp_sdc.c
1096
printk(KERN_INFO PREFIX "Old style SDC (1820-%s).\n",
drivers/input/serio/hp_sdc.c
262
printk(KERN_INFO PREFIX "HP SDC reports successful PUP.\n");
drivers/input/serio/hp_sdc.c
283
printk(KERN_WARNING PREFIX "NMI !\n");
drivers/input/serio/hp_sdc.c
293
printk(KERN_WARNING PREFIX "HIL NMI\n");
drivers/input/serio/hp_sdc.c
322
printk(KERN_WARNING PREFIX "read timeout (%lldus)!\n",
drivers/input/serio/hp_sdc.c
624
printk(KERN_WARNING PREFIX "No free slot to add transaction.\n");
drivers/input/serio/hp_sdc.c
628
printk(KERN_WARNING PREFIX "Transaction add failed: transaction already queued?\n");
drivers/input/serio/hp_sdc.c
921
printk(KERN_WARNING PREFIX ": %s SDC IO=0x%p IRQ=0x%x NMI=0x%x\n",
drivers/input/serio/hp_sdc.c
991
printk(KERN_WARNING PREFIX "Error unregistering HP SDC");
drivers/input/serio/hp_sdc_mlc.c
107
printk(KERN_DEBUG PREFIX "err code %x\n", data);
drivers/input/serio/hp_sdc_mlc.c
111
printk(KERN_WARNING PREFIX "Bastard SDC reconfigured loop!\n");
drivers/input/serio/hp_sdc_mlc.c
124
printk(KERN_WARNING PREFIX "Bastard SDC decided to reconfigure loop!\n");
drivers/input/serio/hp_sdc_mlc.c
128
printk(KERN_WARNING PREFIX "Unknown HIL Error status (%x)!\n", data);
drivers/input/serio/hp_sdc_mlc.c
312
printk(KERN_INFO PREFIX "Registering the System Domain Controller's HIL MLC.\n");
drivers/input/serio/hp_sdc_mlc.c
326
printk(KERN_WARNING PREFIX "Failed to register MLC structure with hil_mlc\n");
drivers/input/serio/hp_sdc_mlc.c
331
printk(KERN_WARNING PREFIX "Request for raw HIL ISR hook denied\n");
drivers/input/serio/hp_sdc_mlc.c
333
printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n"
drivers/input/serio/hp_sdc_mlc.c
346
printk(KERN_ERR PREFIX "Failed to release the raw HIL ISR hook.\n"
drivers/input/serio/hp_sdc_mlc.c
350
printk(KERN_ERR PREFIX "Failed to unregister MLC structure with hil_mlc.\n"
drivers/input/serio/hp_sdc_mlc.c
69
printk(KERN_WARNING PREFIX "HIL Overflow!\n");
drivers/input/serio/i8042.c
1414
printk(KERN_INFO "serio: %s at %#lx,%#lx irq %d\n",
drivers/input/serio/i8042.h
66
printk(KERN_DEBUG KBUILD_MODNAME ": [%d] " format, \
drivers/input/serio/i8042.h
85
printk(KERN_DEBUG pr_fmt(format), ##arg); \
drivers/input/serio/maceps2.c
90
printk(KERN_ERR "Could not allocate PS/2 IRQ\n");
drivers/input/serio/parkbd.c
200
printk(KERN_INFO "serio: PARKBD %s adapter on %s\n",
drivers/input/serio/q40kbd.c
135
printk(KERN_INFO "serio: Q40 kbd registered\n");
drivers/input/serio/rpckbd.c
72
printk(KERN_ERR "rpckbd.c: Could not allocate keyboard receive IRQ\n");
drivers/input/serio/rpckbd.c
77
printk(KERN_ERR "rpckbd.c: Could not allocate keyboard transmit IRQ\n");
drivers/input/serio/sa1111ps2.c
150
printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
drivers/input/serio/sa1111ps2.c
159
printk(KERN_ERR "sa1111ps2: could not allocate IRQ%d: %d\n",
drivers/input/serio/sa1111ps2.c
227
printk("PS/2 interface test failed[1]: %02x\n", stat);
drivers/input/serio/sa1111ps2.c
233
printk("PS/2 interface test failed[2]: %02x\n", stat);
drivers/input/serio/sa1111ps2.c
239
printk("PS/2 interface test failed[3]: %02x\n", stat);
drivers/input/serio/serport.c
177
printk(KERN_INFO "serio: Serial port %s\n", tty_name(tty));
drivers/input/serio/serport.c
287
printk(KERN_ERR "serport.c: Error registering line discipline.\n");
drivers/input/touchscreen/gunze.c
47
printk(KERN_WARNING "gunze.c: bad packet: >%.*s<\n", GUNZE_MAX_LENGTH, gunze->data);
drivers/input/touchscreen/hp680_ts_input.c
98
printk(KERN_ERR "hp680_touchscreen.c: Can't allocate irq %d\n",
drivers/input/touchscreen/htcpen.c
108
printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n",
drivers/input/touchscreen/htcpen.c
114
printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n",
drivers/input/touchscreen/htcpen.c
120
printk(KERN_ERR "htcpen: unable to get IO region 0x%x\n",
drivers/input/touchscreen/htcpen.c
127
printk(KERN_ERR "htcpen: can't allocate device\n");
drivers/input/touchscreen/htcpen.c
146
printk(KERN_ERR "htcpen: irq busy\n");
drivers/input/touchscreen/inexio.c
84
printk(KERN_DEBUG "inexio.c: unknown/unsynchronized data from device, byte %x\n",pinexio->data[0]);
drivers/input/touchscreen/mtouch.c
81
printk(KERN_ERR "mtouch.c: too many response bytes\n");
drivers/input/touchscreen/mtouch.c
98
printk(KERN_DEBUG "mtouch.c: unknown/unsynchronized data from device, byte %x\n",mtouch->data[0]);
drivers/input/touchscreen/usbtouchscreen.c
1028
printk(KERN_INFO "Nexio device: %s, firmware version: %s\n",
drivers/irqchip/irq-i8259.c
192
printk(KERN_DEBUG "spurious 8259A interrupt: IRQ%d.\n", irq);
drivers/irqchip/irq-vic.c
105
printk(KERN_DEBUG "%s: resuming vic at %p\n", __func__, base);
drivers/irqchip/irq-vic.c
135
printk(KERN_DEBUG "%s: suspending vic at %p\n", __func__, base);
drivers/irqchip/irq-vic.c
280
printk(KERN_ERR "%s: too few VICs, increase CONFIG_ARM_VIC_NR\n", __func__);
drivers/irqchip/irq-vic.c
453
printk(KERN_INFO "VIC @%p: id 0x%08x, vendor 0x%02x\n",
drivers/irqchip/irq-vic.c
461
printk(KERN_WARNING "VIC: unknown vendor, continuing anyways\n");
drivers/macintosh/adb.c
119
printk("adb reply (%d)", req->reply_len);
drivers/macintosh/adb.c
121
printk(" %x", req->reply[i]);
drivers/macintosh/adb.c
122
printk("\n");
drivers/macintosh/adb.c
214
printk(KERN_DEBUG "adb device [%d]: %d 0x%X\n", i,
drivers/macintosh/adbhid.c
1076
printk(KERN_DEBUG "ADB mouse (%s) at %d has handler 0x%X\n",
drivers/macintosh/adbhid.c
978
printk(KERN_DEBUG "ADB keyboard at %d has handler 0x%X\n",
drivers/macintosh/ams/ams-core.c
106
printk(KERN_INFO "ams: shock detected!\n");
drivers/macintosh/ams/ams-core.c
99
printk(KERN_INFO "ams: freefall detected!\n");
drivers/macintosh/ams/ams-i2c.c
169
printk(KERN_INFO "ams: Failed to reset the device\n");
drivers/macintosh/ams/ams-i2c.c
174
printk(KERN_INFO "ams: Failed to start the device\n");
drivers/macintosh/ams/ams-i2c.c
188
printk(KERN_INFO "ams: Incorrect device version (%d.%d)\n",
drivers/macintosh/ams/ams-i2c.c
198
printk(KERN_INFO "ams: Incorrect firmware version (%d.%d)\n",
drivers/macintosh/ams/ams-i2c.c
226
printk(KERN_INFO "ams: Found I2C based motion sensor\n");
drivers/macintosh/ams/ams-i2c.c
242
printk(KERN_INFO "ams: Unloading\n");
drivers/macintosh/ams/ams-pmu.c
142
printk(KERN_INFO "ams: Unloading\n");
drivers/macintosh/ams/ams-pmu.c
194
printk(KERN_INFO "ams: Found PMU based motion sensor\n");
drivers/macintosh/ans-lcd.c
174
printk(KERN_INFO "LCD: misc_register failed\n");
drivers/macintosh/ans-lcd.c
180
printk(KERN_DEBUG "LCD: init\n");
drivers/macintosh/ans-lcd.c
37
printk(KERN_DEBUG "LCD: CTRL byte: %02x\n",c);
drivers/macintosh/ans-lcd.c
64
printk(KERN_DEBUG "LCD: write\n");
drivers/macintosh/ans-lcd.c
89
printk(KERN_DEBUG "LCD: ioctl(%d,%d)\n",cmd,arg);
drivers/macintosh/apm_emu.c
100
printk(KERN_INFO "apm_emu: PMU APM Emulation removed.\n");
drivers/macintosh/apm_emu.c
90
printk(KERN_INFO "apm_emu: PMU APM Emulation initialized.\n");
drivers/macintosh/mac_hid.c
115
printk(KERN_ERR
drivers/macintosh/mac_hid.c
123
printk(KERN_ERR
drivers/macintosh/macio-adb.c
123
printk(KERN_ERR "ADB: can't get irq %d\n", irq);
drivers/macintosh/macio-adb.c
128
printk("adb: mac-io driver 1.0 for unified ADB\n");
drivers/macintosh/macio_asic.c
268
printk(KERN_INFO "macio: fixed SCC irqs on gatwick\n");
drivers/macintosh/macio_asic.c
274
printk(KERN_INFO "macio: fixed media-bay irq on gatwick\n");
drivers/macintosh/macio_asic.c
281
printk(KERN_INFO "macio: fixed left floppy irqs\n");
drivers/macintosh/macio_asic.c
286
printk(KERN_INFO "macio: fixed left ide irqs\n");
drivers/macintosh/macio_asic.c
341
printk(KERN_WARNING "Can't request resource "
drivers/macintosh/macio_asic.c
402
printk("preparing mdev @%p, ofdev @%p, dev @%p, kobj @%p\n",
drivers/macintosh/macio_asic.c
431
printk(KERN_DEBUG"macio: device registration error for %s!\n",
drivers/macintosh/macio_asic.c
615
printk (KERN_WARNING "MacIO: Unable to reserve resource #%d:%lx@%lx"
drivers/macintosh/macio_asic.c
721
printk(KERN_INFO "MacIO PCI driver attached to %s chipset\n",
drivers/macintosh/mediabay.c
383
printk(KERN_INFO "mediabay%d: Bay is now empty\n", bay->index);
drivers/macintosh/mediabay.c
385
printk(KERN_INFO "mediabay%d: Bay contains %s\n",
drivers/macintosh/mediabay.c
594
printk(KERN_INFO "mediabay%d: Registered %s media-bay\n", i, bay->ops->name);
drivers/macintosh/mediabay.c
647
printk("mediabay%d: Content changed during sleep...\n", bay->index);
drivers/macintosh/rack-meter.c
305
printk(KERN_INFO "RackMeter initialized\n");
drivers/macintosh/rack-meter.c
342
printk(KERN_WARNING "rackmeter: Incorrect DMA mark 0x%08x\n",
drivers/macintosh/rack-meter.c
346
printk(KERN_ERR "rackmeter: Too many errors,"
drivers/macintosh/rack-meter.c
401
printk(KERN_ERR "rackmeter: failed to allocate memory !\n");
drivers/macintosh/rack-meter.c
412
printk(KERN_ERR
drivers/macintosh/rack-meter.c
420
printk(KERN_ERR
drivers/macintosh/rack-meter.c
432
printk(KERN_ERR
drivers/macintosh/rack-meter.c
446
printk(KERN_ERR
drivers/macintosh/rack-meter.c
456
printk(KERN_ERR
drivers/macintosh/rack-meter.c
467
printk(KERN_ERR
drivers/macintosh/rack-meter.c
478
printk(KERN_ERR
drivers/macintosh/rack-meter.c
486
printk(KERN_ERR
drivers/macintosh/rack-meter.c
494
printk(KERN_ERR
drivers/macintosh/smu.c
1000
printk(KERN_DEBUG "SMU: Failed creating sdb-partition-%02x "
drivers/macintosh/smu.c
1329
printk(KERN_ERR "via-pmu: cannot register misc device.\n");
drivers/macintosh/smu.c
210
printk(KERN_WARNING "SMU: reply buffer too small,"
drivers/macintosh/smu.c
252
printk(KERN_INFO "SMU: message interrupt !\n");
drivers/macintosh/smu.c
482
printk(KERN_INFO "SMU: Driver %s %s\n", VERSION, AUTHOR);
drivers/macintosh/smu.c
490
printk(KERN_ERR "SMU: Command buffer allocation failed !\n");
drivers/macintosh/smu.c
511
printk(KERN_ERR "SMU: Can't find doorbell GPIO !\n");
drivers/macintosh/smu.c
516
printk(KERN_ERR "SMU: Can't find doorbell GPIO address !\n");
drivers/macintosh/smu.c
550
printk(KERN_ERR "SMU: Can't map doorbell buffer pointer !\n");
drivers/macintosh/smu.c
558
printk(KERN_INFO "SMU: using NAP mode workaround\n");
drivers/macintosh/smu.c
58
#define DPRINTK(fmt, args...) do { printk(KERN_DEBUG fmt , ##args); } while (0)
drivers/macintosh/smu.c
586
printk(KERN_ERR "smu: failed to map irq for node %pOF\n",
drivers/macintosh/smu.c
592
printk(KERN_ERR "smu: failed to map irq for node %pOF\n",
drivers/macintosh/smu.c
603
printk(KERN_WARNING "SMU: can't "
drivers/macintosh/smu.c
613
printk(KERN_WARNING "SMU: can't "
drivers/macintosh/smu.c
935
printk(KERN_DEBUG "SMU: short read in "
drivers/macintosh/smu.c
988
printk(KERN_DEBUG "SMU: datablock read failed while reading "
drivers/macintosh/smu.c
995
printk(KERN_DEBUG "SMU: Reading partition %02x and got "
drivers/macintosh/therm_adt746x.c
165
printk(KERN_DEBUG "adt746x: Setting speed to automatic "
drivers/macintosh/therm_adt746x.c
168
printk(KERN_DEBUG "adt746x: Setting speed to %d "
drivers/macintosh/therm_adt746x.c
214
printk(KERN_INFO "adt746x: Temperature infos:"
drivers/macintosh/therm_adt746x.c
257
printk(KERN_DEBUG "adt746x: Setting fans speed to %d "
drivers/macintosh/therm_adt746x.c
269
printk(KERN_DEBUG "adt746x: Stopping "
drivers/macintosh/therm_adt746x.c
357
printk(KERN_INFO "Adjusting limits by %d degrees\n", val); \
drivers/macintosh/therm_adt746x.c
371
printk(KERN_INFO "Setting specified fan speed to %d\n", val); \
drivers/macintosh/therm_adt746x.c
443
printk(KERN_WARNING
drivers/macintosh/therm_adt746x.c
483
printk(KERN_INFO "adt746x: version %d (%ssupported)\n",
drivers/macintosh/therm_adt746x.c
496
printk(KERN_INFO "sensor %d: %s\n", i, sensor_location[i]);
drivers/macintosh/therm_adt746x.c
521
printk(KERN_INFO "adt746x: ADT7460 initializing\n");
drivers/macintosh/therm_adt746x.c
525
printk(KERN_INFO "adt746x: ADT7467 initializing\n");
drivers/macintosh/therm_adt746x.c
532
printk(KERN_INFO "adt746x: Lowering max temperatures from %d, %d, %d"
drivers/macintosh/therm_adt746x.c
558
printk(KERN_INFO "adt746x: Kthread creation failed\n");
drivers/macintosh/therm_adt746x.c
578
printk(KERN_INFO "adt746x: Putting max temperatures back from "
drivers/macintosh/therm_windtunnel.c
164
printk(", Fan: %d (tuned %+d)\n", 11-fan_setting, x.fan_level-fan_setting );
drivers/macintosh/therm_windtunnel.c
186
printk(", Fan: %d\n", 11-x.fan_level );
drivers/macintosh/therm_windtunnel.c
226
printk("Failed writing config register\n");
drivers/macintosh/therm_windtunnel.c
248
printk(")\n");
drivers/macintosh/therm_windtunnel.c
259
printk(KERN_WARNING
drivers/macintosh/therm_windtunnel.c
354
printk(KERN_ERR "g4fan: bad client\n");
drivers/macintosh/therm_windtunnel.c
366
printk("ADM1030 fan controller [@%02x]\n", cl->addr );
drivers/macintosh/therm_windtunnel.c
392
printk("DS1775 digital thermometer [@%02x]\n", cl->addr );
drivers/macintosh/therm_windtunnel.c
396
printk("\n");
drivers/macintosh/therm_windtunnel.c
529
printk(KERN_ERR "therm_windtunnel: unsupported thermal design %d\n", info->id );
drivers/macintosh/therm_windtunnel.c
538
printk(KERN_ERR "Can't register fan controller!\n");
drivers/macintosh/therm_windtunnel.c
96
printk("%s%d.%d C", s ? s : "", temp>>8, (temp & 255)*10/256 );
drivers/macintosh/via-cuda.c
222
printk(KERN_ERR "cuda_init_via() failed\n");
drivers/macintosh/via-cuda.c
249
printk(KERN_ERR "via-cuda: Error getting \"reg\" property !\n");
drivers/macintosh/via-cuda.c
254
printk(KERN_ERR "via-cuda: Can't map address !\n");
drivers/macintosh/via-cuda.c
263
printk(KERN_ERR "cuda_init_via() failed\n");
drivers/macintosh/via-cuda.c
298
printk(KERN_ERR "via-cuda: can't map interrupts for %pOF\n",
drivers/macintosh/via-cuda.c
305
printk(KERN_ERR "via-cuda: can't request irq %d\n", cuda_irq);
drivers/macintosh/via-pmu-backlight.c
163
printk(KERN_ERR "PMU Backlight registration failed\n");
drivers/macintosh/via-pmu-backlight.c
186
printk(KERN_INFO "PMU Backlight initialized (%s)\n", name);
drivers/macintosh/via-pmu.c
1102
printk(KERN_ERR "pmu_adb_reset_bus: pmu_queue_request failed\n");
drivers/macintosh/via-pmu.c
1126
printk(KERN_ERR "pmu_request: bad nbytes (%d)\n", nbytes);
drivers/macintosh/via-pmu.c
1189
printk(KERN_ERR "PMU not responding (!ack)\n");
drivers/macintosh/via-pmu.c
1393
printk(KERN_ERR "PMU: extra ADB reply\n");
drivers/macintosh/via-pmu.c
1473
printk(KERN_ERR "PMU: spurious SR intr (%x)\n", in_8(&via2[B]));
drivers/macintosh/via-pmu.c
1534
printk(KERN_ERR "PMU: bad reply len %d\n", bite);
drivers/macintosh/via-pmu.c
1565
printk(KERN_ERR "via_pmu_interrupt: unknown state %d?\n",
drivers/macintosh/via-pmu.c
1609
printk(KERN_DEBUG "PMU: stuck in intr loop, "
drivers/macintosh/via-pmu.c
1946
printk(KERN_ERR "Sleep mode not supported on this machine\n");
drivers/macintosh/via-pmu.c
2036
printk(KERN_WARNING "ioremap failed: sleep won't be possible");
drivers/macintosh/via-pmu.c
2488
printk(KERN_ERR "via-pmu: cannot register misc device.\n");
drivers/macintosh/via-pmu.c
301
printk(KERN_ERR "via-pmu: Error getting \"reg\" property !\n");
drivers/macintosh/via-pmu.c
342
printk(KERN_ERR "via-pmu: Can't find GPIO reg !\n");
drivers/macintosh/via-pmu.c
350
printk(KERN_ERR "via-pmu: Can't map address !\n");
drivers/macintosh/via-pmu.c
432
printk(KERN_ERR "via-pmu: can't map interrupt\n");
drivers/macintosh/via-pmu.c
441
printk(KERN_ERR "via-pmu: can't request irq %d\n", irq);
drivers/macintosh/via-pmu.c
457
printk(KERN_ERR "pmu: can't get irq %d"
drivers/macintosh/via-pmu.c
583
printk(KERN_ERR "init_pmu: no response from PMU\n");
drivers/macintosh/via-pmu.c
595
printk(KERN_ERR "init_pmu: timed out acking intrs\n");
drivers/macintosh/via-pmu.c
625
printk(KERN_INFO "via-pmu: Server Mode is %s\n",
drivers/macintosh/via-pmu.c
630
printk(KERN_INFO "PMU driver v%d initialized for %s, firmware: %02x\n",
drivers/macintosh/windfarm_core.c
106
printk(KERN_ERR "windfarm: Overtemp "
drivers/macintosh/windfarm_core.c
129
printk(KERN_ERR "windfarm: failed to create thread,err %ld\n",
drivers/macintosh/windfarm_core.c
214
printk(KERN_WARNING "windfarm: trying to register"
drivers/macintosh/windfarm_core.c
229
printk(KERN_WARNING "windfarm: device_create_file failed"
drivers/macintosh/windfarm_core.c
309
printk(KERN_WARNING "windfarm: trying to register"
drivers/macintosh/windfarm_core.c
324
printk(KERN_WARNING "windfarm: device_create_file failed"
drivers/macintosh/windfarm_core.c
412
printk(KERN_WARNING "windfarm: Overtemp condition detected !\n");
drivers/macintosh/windfarm_core.c
430
printk(KERN_WARNING "windfarm: Overtemp condition cleared !\n");
drivers/macintosh/windfarm_core.c
45
#define DBG(args...) printk(args)
drivers/macintosh/windfarm_cpufreq_clamp.c
28
printk(KERN_INFO "windfarm: Clamping CPU frequency to "
drivers/macintosh/windfarm_cpufreq_clamp.c
32
printk(KERN_INFO "windfarm: CPU frequency unclamped !\n");
drivers/macintosh/windfarm_fcu_controls.c
28
#define DBG(args...) printk(args)
drivers/macintosh/windfarm_lm75_sensor.c
30
#define DBG(args...) printk(args)
drivers/macintosh/windfarm_lm87_sensor.c
29
#define DBG(args...) printk(args)
drivers/macintosh/windfarm_lm87_sensor.c
59
printk(KERN_ERR "wf_lm87: Error reading LM87 !\n");
drivers/macintosh/windfarm_max6690_sensor.c
90
printk(KERN_ERR "windfarm: Couldn't create MAX6690 sensor: "
drivers/macintosh/windfarm_pid.c
20
#define DBG(args...) printk(args)
drivers/macintosh/windfarm_pm112.c
154
printk(KERN_WARNING"windfarm: can't get CPU PID fan config\n");
drivers/macintosh/windfarm_pm112.c
211
printk(KERN_ERR "windfarm: Overtemp due to immediate CPU"
drivers/macintosh/windfarm_pm112.c
217
printk(KERN_ERR "windfarm: Critical overtemp due to"
drivers/macintosh/windfarm_pm112.c
238
printk(KERN_ERR "windfarm: Overtemp due to average CPU"
drivers/macintosh/windfarm_pm112.c
244
printk(KERN_ERR "windfarm: Critical overtemp due to"
drivers/macintosh/windfarm_pm112.c
261
printk(KERN_ERR "windfarm: Overtemp condition cleared !\n");
drivers/macintosh/windfarm_pm112.c
285
printk(KERN_WARNING "windfarm: CPU %d temperature "
drivers/macintosh/windfarm_pm112.c
29
#define DBG(args...) printk(args)
drivers/macintosh/windfarm_pm112.c
300
printk(KERN_WARNING "windfarm: CPU %d power "
drivers/macintosh/windfarm_pm112.c
338
printk(KERN_WARNING "windfarm: fan %s reports "
drivers/macintosh/windfarm_pm112.c
35
#define DBG_LOTS(args...) printk(args)
drivers/macintosh/windfarm_pm112.c
367
printk(KERN_INFO "windfarm: Backside control loop started.\n");
drivers/macintosh/windfarm_pm112.c
379
printk(KERN_WARNING "windfarm: U4 temp sensor error %d\n",
drivers/macintosh/windfarm_pm112.c
391
printk(KERN_WARNING "windfarm: backside fan error %d\n", err);
drivers/macintosh/windfarm_pm112.c
417
printk(KERN_INFO "windfarm: Drive bay control loop started.\n");
drivers/macintosh/windfarm_pm112.c
429
printk(KERN_WARNING "windfarm: drive bay temp sensor "
drivers/macintosh/windfarm_pm112.c
441
printk(KERN_WARNING "windfarm: drive bay fan error %d\n", err);
drivers/macintosh/windfarm_pm112.c
469
printk(KERN_INFO "windfarm: Slots control loop started.\n");
drivers/macintosh/windfarm_pm112.c
476
printk(KERN_WARNING "windfarm: slots power sensor error %d\n",
drivers/macintosh/windfarm_pm112.c
488
printk(KERN_WARNING "windfarm: slots fan error %d\n", err);
drivers/macintosh/windfarm_pm112.c
516
printk(KERN_INFO "windfarm: CPUs control loops started.\n");
drivers/macintosh/windfarm_pm112.c
690
printk(KERN_INFO "windfarm: initializing for dual-core desktop G5\n");
drivers/macintosh/windfarm_pm121.c
525
printk(KERN_WARNING "pm121: %s fan config not found "
drivers/macintosh/windfarm_pm121.c
536
printk(KERN_WARNING "pm121: Memory allocation error\n");
drivers/macintosh/windfarm_pm121.c
572
printk(KERN_WARNING "pm121: failed to set up %s loop "
drivers/macintosh/windfarm_pm121.c
603
printk(KERN_WARNING "windfarm: %s sensor error %d\n",
drivers/macintosh/windfarm_pm121.c
631
printk(KERN_WARNING "windfarm: %s fan error %d\n",
drivers/macintosh/windfarm_pm121.c
654
printk(KERN_WARNING "pm121: CPU PID fan config not found.\n");
drivers/macintosh/windfarm_pm121.c
679
printk(KERN_WARNING "pm121: History size overflow on "
drivers/macintosh/windfarm_pm121.c
708
printk(KERN_WARNING "pm121: CPU fan config not found, max fan speed\n");
drivers/macintosh/windfarm_pm121.c
734
printk(KERN_WARNING "pm121: CPU temp sensor error %d\n",
drivers/macintosh/windfarm_pm121.c
742
printk(KERN_WARNING "pm121: CPU power sensor error %d\n",
drivers/macintosh/windfarm_pm121.c
773
printk(KERN_WARNING "pm121: %s fan error %d\n",
drivers/macintosh/windfarm_pm121.c
979
printk(KERN_INFO "pm121: Initializing for iMac G5 iSight model ID %d\n",
drivers/macintosh/windfarm_pm72.c
135
printk(KERN_ERR "windfarm: Overtemp due to immediate CPU"
drivers/macintosh/windfarm_pm72.c
141
printk(KERN_ERR "windfarm: Critical overtemp due to"
drivers/macintosh/windfarm_pm72.c
178
printk(KERN_ERR "windfarm: Overtemp due to average CPU"
drivers/macintosh/windfarm_pm72.c
184
printk(KERN_ERR "windfarm: Critical overtemp due to"
drivers/macintosh/windfarm_pm72.c
201
printk(KERN_ERR "windfarm: Overtemp condition cleared !\n");
drivers/macintosh/windfarm_pm72.c
27
#define DBG(args...) printk(args)
drivers/macintosh/windfarm_pm72.c
33
#define DBG_LOTS(args...) printk(args)
drivers/macintosh/windfarm_pm72.c
484
printk(KERN_WARNING "windfarm: U4 temp sensor error %d\n",
drivers/macintosh/windfarm_pm72.c
497
printk(KERN_WARNING "windfarm: backside fan error %d\n", err);
drivers/macintosh/windfarm_pm72.c
576
printk(KERN_WARNING "windfarm: drive bay fan error %d\n", err);
drivers/macintosh/windfarm_pm72.c
614
printk(KERN_INFO "windfarm: CPUs control loops started.\n");
drivers/macintosh/windfarm_pm81.c
120
#define DBG(args...) printk(args)
drivers/macintosh/windfarm_pm81.c
280
printk(KERN_WARNING "windfarm: System fan config not found "
drivers/macintosh/windfarm_pm81.c
288
printk(KERN_WARNING "windfarm: Memory allocation error"
drivers/macintosh/windfarm_pm81.c
342
printk(KERN_WARNING "windfarm: HD temp sensor error %d\n",
drivers/macintosh/windfarm_pm81.c
378
printk(KERN_WARNING "windfarm: Sys fan error %d\n",
drivers/macintosh/windfarm_pm81.c
386
printk(KERN_WARNING "windfarm: HD fan error %d\n",
drivers/macintosh/windfarm_pm81.c
404
printk(KERN_WARNING "windfarm: CPU PID fan config not found "
drivers/macintosh/windfarm_pm81.c
433
printk(KERN_WARNING "windfarm: History size overflow on "
drivers/macintosh/windfarm_pm81.c
462
printk(KERN_WARNING "windfarm: CPU fan config not found\n"
drivers/macintosh/windfarm_pm81.c
485
printk(KERN_WARNING "windfarm: CPU temp sensor error %d\n",
drivers/macintosh/windfarm_pm81.c
493
printk(KERN_WARNING "windfarm: CPU power sensor error %d\n",
drivers/macintosh/windfarm_pm81.c
529
printk(KERN_WARNING "windfarm: CPU main fan"
drivers/macintosh/windfarm_pm81.c
712
printk(KERN_INFO "windfarm: Initializing for iMacG5 model ID %d\n",
drivers/macintosh/windfarm_pm91.c
154
printk(KERN_WARNING "windfarm: CPU PID fan config not found "
drivers/macintosh/windfarm_pm91.c
180
printk(KERN_WARNING "windfarm: History size overflow on "
drivers/macintosh/windfarm_pm91.c
209
printk(KERN_WARNING "windfarm: CPU fan config not found\n"
drivers/macintosh/windfarm_pm91.c
232
printk(KERN_WARNING "windfarm: CPU temp sensor error %d\n",
drivers/macintosh/windfarm_pm91.c
240
printk(KERN_WARNING "windfarm: CPU power sensor error %d\n",
drivers/macintosh/windfarm_pm91.c
267
printk(KERN_WARNING "windfarm: CPU main fan"
drivers/macintosh/windfarm_pm91.c
275
printk(KERN_WARNING "windfarm: CPU second fan"
drivers/macintosh/windfarm_pm91.c
283
printk(KERN_WARNING "windfarm: CPU third fan"
drivers/macintosh/windfarm_pm91.c
304
printk(KERN_WARNING "windfarm: Memory allocation error"
drivers/macintosh/windfarm_pm91.c
340
printk(KERN_WARNING "windfarm: HD temp sensor error %d\n",
drivers/macintosh/windfarm_pm91.c
363
printk(KERN_WARNING "windfarm: HD fan error %d\n",
drivers/macintosh/windfarm_pm91.c
384
printk(KERN_WARNING "windfarm: Memory allocation error"
drivers/macintosh/windfarm_pm91.c
420
printk(KERN_WARNING "windfarm: Slots power sensor error %d\n",
drivers/macintosh/windfarm_pm91.c
445
printk(KERN_WARNING "windfarm: Slots fan error %d\n",
drivers/macintosh/windfarm_pm91.c
55
#define DBG(args...) printk(args)
drivers/macintosh/windfarm_pm91.c
635
printk(KERN_INFO "windfarm: Initializing for Desktop G5 model\n");
drivers/macintosh/windfarm_rm31.c
129
printk(KERN_ERR "windfarm: Overtemp due to immediate CPU"
drivers/macintosh/windfarm_rm31.c
135
printk(KERN_ERR "windfarm: Critical overtemp due to"
drivers/macintosh/windfarm_rm31.c
172
printk(KERN_ERR "windfarm: Overtemp due to average CPU"
drivers/macintosh/windfarm_rm31.c
178
printk(KERN_ERR "windfarm: Critical overtemp due to"
drivers/macintosh/windfarm_rm31.c
195
printk(KERN_ERR "windfarm: Overtemp condition cleared !\n");
drivers/macintosh/windfarm_rm31.c
27
#define DBG(args...) printk(args)
drivers/macintosh/windfarm_rm31.c
33
#define DBG_LOTS(args...) printk(args)
drivers/macintosh/windfarm_rm31.c
386
printk(KERN_WARNING "windfarm: U3 temp sensor error %d\n",
drivers/macintosh/windfarm_rm31.c
399
printk(KERN_WARNING "windfarm: DIMMs temp sensor error %d\n",
drivers/macintosh/windfarm_rm31.c
414
printk(KERN_WARNING "windfarm: backside fan error %d\n", err);
drivers/macintosh/windfarm_rm31.c
481
printk(KERN_WARNING "windfarm: slots bay fan error %d\n", err);
drivers/macintosh/windfarm_rm31.c
517
printk(KERN_INFO "windfarm: CPUs control loops started.\n");
drivers/macintosh/windfarm_smu_controls.c
100
printk(KERN_WARNING "windfarm: SMU failed new fan command "
drivers/macintosh/windfarm_smu_controls.c
278
printk(KERN_WARNING "windfarm: Failed to create SMU "
drivers/macintosh/windfarm_smu_controls.c
296
printk(KERN_WARNING "windfarm: Failed to create SMU "
drivers/macintosh/windfarm_smu_controls.c
31
#define DBG(args...) printk(args)
drivers/macintosh/windfarm_smu_sat.c
101
printk(KERN_DEBUG "sat %d partition %x:", sat_id, id);
drivers/macintosh/windfarm_smu_sat.c
127
printk(KERN_DEBUG "wf_sat_get: data is");
drivers/macintosh/windfarm_smu_sat.c
236
printk(KERN_ERR "wf_sat_create: don't understand "
drivers/macintosh/windfarm_smu_sat.c
244
printk(KERN_ERR "wf_sat_create: can't cope with "
drivers/macintosh/windfarm_smu_sat.c
266
printk(KERN_ERR "wf_sat_create: couldn't create "
drivers/macintosh/windfarm_smu_sat.c
293
printk(KERN_ERR "wf_sat_create: couldn't create power "
drivers/macintosh/windfarm_smu_sat.c
67
printk(KERN_ERR "smu_sat_get_sdb_part wr error %d\n", err);
drivers/macintosh/windfarm_smu_sat.c
73
printk(KERN_ERR "smu_sat_get_sdb_part rd len error\n");
drivers/macintosh/windfarm_smu_sat.c
78
printk(KERN_ERR "smu_sat_get_sdb_part no partition %x\n", id);
drivers/macintosh/windfarm_smu_sat.c
91
printk(KERN_ERR "smu_sat_get_sdb_part rd err %d\n",
drivers/macintosh/windfarm_smu_sensors.c
119
printk(KERN_ERR "windfarm: read CPU current failed, err %d\n",
drivers/macintosh/windfarm_smu_sensors.c
140
printk(KERN_ERR "windfarm: read CPU voltage failed, err %d\n",
drivers/macintosh/windfarm_smu_sensors.c
161
printk(KERN_ERR "windfarm: read slots power failed, err %d\n",
drivers/macintosh/windfarm_smu_sensors.c
31
#define DBG(args...) printk(args)
drivers/macintosh/windfarm_smu_sensors.c
354
printk(KERN_INFO "windfarm: CPU Power sensor using faked"
drivers/macintosh/windfarm_smu_sensors.c
80
printk(KERN_ERR "winfarm: read ADC 0x%x returned %d bytes !\n",
drivers/macintosh/windfarm_smu_sensors.c
97
printk(KERN_ERR "windfarm: read CPU temp failed, err %d\n",
drivers/md/bcache/btree.c
576
printk(KERN_CONT " l=%u %llu:%llu", b->level,
drivers/md/dm-integrity.c
367
#define DEBUG_print(x, ...) printk(KERN_DEBUG x, ##__VA_ARGS__)
drivers/md/dm-integrity.c
368
#define DEBUG_bytes(bytes, len, msg, ...) printk(KERN_DEBUG msg "%s%*ph\n", ##__VA_ARGS__, \
drivers/md/dm-vdo/logger.c
84
printk(KERN_DEFAULT "%pV", &vaf);
drivers/md/md-autodetect.c
114
printk(KERN_INFO "md: Will configure md%d (%s) from %s, below.\n",
drivers/md/md-autodetect.c
265
printk(KERN_INFO "md: Waiting for all devices to be available before autodetect\n");
drivers/md/md-autodetect.c
266
printk(KERN_INFO "md: If you don't use raid, use raid=noautodetect\n");
drivers/md/md-autodetect.c
277
printk(KERN_INFO "md: Skipping autodetection of RAID arrays. (raid=autodetect will force)\n");
drivers/md/md-autodetect.c
72
printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
drivers/md/md-autodetect.c
79
printk(KERN_WARNING "md: md=%s%d, Specified more than once. "
drivers/md/md-autodetect.c
84
printk(KERN_WARNING "md: md=%s%d - too many md initialisations\n", partitioned?"d":"", minor);
drivers/md/md-autodetect.c
94
printk(KERN_WARNING "md: Too few arguments supplied to md=.\n");
drivers/media/common/b2c2/flexcop-common.h
31
printk(KERN_ERR FC_LOG_PREFIX ": " format "\n" , ## arg)
drivers/media/common/b2c2/flexcop-common.h
34
printk(KERN_INFO FC_LOG_PREFIX ": " format "\n" , ## arg)
drivers/media/common/b2c2/flexcop-common.h
37
printk(KERN_WARNING FC_LOG_PREFIX ": " format "\n" , ## arg)
drivers/media/common/b2c2/flexcop-sram.c
117
printk("%s: SRAM timeout\n", __func__);
drivers/media/common/b2c2/flexcop-sram.c
129
printk("%s: SRAM timeout\n", __func__);
drivers/media/common/b2c2/flexcop-sram.c
92
printk("%s: SRAM timeout\n", __func__);
drivers/media/common/b2c2/flexcop.h
18
do { if ((b2c2_flexcop_debug & (level))) printk(args); } while (0)
drivers/media/common/cx2341x.c
1211
printk(KERN_INFO "%s: Stream: %s",
drivers/media/common/cx2341x.c
1215
printk(KERN_CONT " (with navigation packets)");
drivers/media/common/cx2341x.c
1216
printk(KERN_CONT "\n");
drivers/media/common/cx2341x.c
1217
printk(KERN_INFO "%s: VBI Format: %s\n",
drivers/media/common/cx2341x.c
1222
printk(KERN_INFO "%s: Video: %dx%d, %d fps%s\n",
drivers/media/common/cx2341x.c
1227
printk(KERN_INFO "%s: Video: %s, %s, %s, %d",
drivers/media/common/cx2341x.c
1234
printk(KERN_CONT ", Peak %d", p->video_bitrate_peak);
drivers/media/common/cx2341x.c
1235
printk(KERN_CONT "\n");
drivers/media/common/cx2341x.c
1236
printk(KERN_INFO
drivers/media/common/cx2341x.c
1242
printk(KERN_INFO "%s: Video: Temporal Decimation %d\n",
drivers/media/common/cx2341x.c
1246
printk(KERN_INFO "%s: Audio: %s, %s, %s, %s%s",
drivers/media/common/cx2341x.c
1257
printk(KERN_CONT ", %s", cx2341x_menu_item(p,
drivers/media/common/cx2341x.c
1259
printk(KERN_CONT ", %s, %s\n",
drivers/media/common/cx2341x.c
1264
printk(KERN_INFO "%s: Spatial Filter: %s, Luma %s, Chroma %s, %d\n",
drivers/media/common/cx2341x.c
1274
printk(KERN_INFO "%s: Temporal Filter: %s, %d\n",
drivers/media/common/cx2341x.c
1279
printk(KERN_INFO
drivers/media/common/ttpci-eeprom.c
32
#define dprintk(x...) do { printk(x); } while (0)
drivers/media/common/videobuf2/videobuf2-dma-contig.c
281
printk(KERN_ERR "No buffer to map\n");
drivers/media/common/videobuf2/videobuf2-dma-sg.c
31
printk(KERN_DEBUG "vb2-dma-sg: " fmt, ## arg); \
drivers/media/common/videobuf2/videobuf2-dma-sg.c
338
printk(KERN_ERR "No memory to map\n");
drivers/media/common/videobuf2/videobuf2-dma-sg.c
344
printk(KERN_ERR "Remapping memory, error: %d\n", err);
drivers/media/dvb-core/dmxdev.c
30
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/dvb-core/dvb_ca_en50221.c
40
printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg);\
drivers/media/dvb-core/dvb_demux.c
41
printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg)
drivers/media/dvb-core/dvb_frontend.c
60
printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg)
drivers/media/dvb-core/dvbdev.c
38
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/dvb-frontends/ascot2e.h
52
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/atbm8830.c
18
printk(KERN_DEBUG "atbm8830: " args); \
drivers/media/dvb-frontends/atbm8830.h
57
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/au8522.h
59
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/au8522_common.c
21
printk(arg);\
drivers/media/dvb-frontends/au8522_common.c
41
printk("%s: writereg error (reg == 0x%02x, val == 0x%04x, ret == %i)\n",
drivers/media/dvb-frontends/au8522_common.c
63
printk(KERN_ERR "%s: readreg error (ret == %i)\n",
drivers/media/dvb-frontends/au8522_decoder.c
399
printk(KERN_ERR "Unsupported audio mode requested! mode=%d\n",
drivers/media/dvb-frontends/au8522_decoder.c
574
printk(KERN_ERR "au8522 mode not currently supported\n");
drivers/media/dvb-frontends/au8522_decoder.c
694
printk(KERN_ERR "au8522_decoder allocation failed\n");
drivers/media/dvb-frontends/au8522_decoder.c
698
printk(KERN_INFO "au8522_decoder creating new instance...\n");
drivers/media/dvb-frontends/au8522_decoder.c
702
printk(KERN_INFO "au8522_decoder attach existing instance.\n");
drivers/media/dvb-frontends/au8522_dig.c
24
printk(arg);\
drivers/media/dvb-frontends/au8522_dig.c
868
printk(KERN_ERR "%s: Failed to initialize correctly\n",
drivers/media/dvb-frontends/bcm3510.c
70
#define dprintk(level,x...) if (level & debug) printk(x)
drivers/media/dvb-frontends/bcm3510.h
31
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/bcm3510_priv.h
15
#define err(format, arg...) printk(KERN_ERR "bcm3510: " format "\n", ## arg)
drivers/media/dvb-frontends/bcm3510_priv.h
17
#define info(format, arg...) printk(KERN_INFO "bcm3510: " format "\n", ## arg)
drivers/media/dvb-frontends/bcm3510_priv.h
19
#define warn(format, arg...) printk(KERN_WARNING "bcm3510: " format "\n", ## arg)
drivers/media/dvb-frontends/cx22700.c
33
if (debug) printk(KERN_DEBUG "cx22700: " args); \
drivers/media/dvb-frontends/cx22700.c
69
printk("%s: writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
drivers/media/dvb-frontends/cx22700.h
29
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/cx22702.c
107
printk(KERN_ERR "%s: error (reg == 0x%02x, ret == %i)\n",
drivers/media/dvb-frontends/cx22702.c
42
#define dprintk if (debug) printk
drivers/media/dvb-frontends/cx22702.c
84
printk(KERN_ERR
drivers/media/dvb-frontends/cx22702.h
40
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/cx24110.c
37
if (debug) printk(KERN_DEBUG "cx24110: " args); \
drivers/media/dvb-frontends/cx24110.h
43
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/cx24113.c
119
printk(KERN_DEBUG "%s: reg=0x%x (error=%d)\n",
drivers/media/dvb-frontends/cx24113.c
20
#define cx_info(args...) do { printk(KERN_INFO "CX24113: " args); } while (0)
drivers/media/dvb-frontends/cx24113.c
21
#define cx_err(args...) do { printk(KERN_ERR "CX24113: " args); } while (0)
drivers/media/dvb-frontends/cx24113.c
26
printk(KERN_DEBUG "CX24113: %s: ", __func__); \
drivers/media/dvb-frontends/cx24113.c
27
printk(args); \
drivers/media/dvb-frontends/cx24113.c
97
printk(KERN_DEBUG "%s: writereg error(err == %i, reg == 0x%02x, data == 0x%02x)\n",
drivers/media/dvb-frontends/cx24113.h
28
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/cx24113.h
34
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/cx24116.c
1131
printk(KERN_INFO "Invalid probe, probably not a CX24116 device\n");
drivers/media/dvb-frontends/cx24116.c
195
printk("cx24116: %s: write reg 0x%02x, value 0x%02x\n",
drivers/media/dvb-frontends/cx24116.c
200
printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x, value == 0x%02x)\n",
drivers/media/dvb-frontends/cx24116.c
229
printk(KERN_INFO "cx24116: %s: write regN 0x%02x, len = %d\n",
drivers/media/dvb-frontends/cx24116.c
234
printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x\n",
drivers/media/dvb-frontends/cx24116.c
259
printk(KERN_ERR "%s: reg=0x%x (error=%d)\n",
drivers/media/dvb-frontends/cx24116.c
265
printk(KERN_INFO "cx24116: read reg 0x%02x, value 0x%02x\n",
drivers/media/dvb-frontends/cx24116.c
42
printk(KERN_INFO "cx24116: " args); \
drivers/media/dvb-frontends/cx24116.c
478
printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n",
drivers/media/dvb-frontends/cx24116.c
482
printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n",
drivers/media/dvb-frontends/cx24116.c
485
printk(KERN_ERR "%s: No firmware uploaded (timeout or file not found?)\n",
drivers/media/dvb-frontends/cx24116.c
496
printk(KERN_ERR "%s: Writing firmware to device failed\n",
drivers/media/dvb-frontends/cx24116.c
501
printk(KERN_INFO "%s: Firmware upload %s\n", __func__,
drivers/media/dvb-frontends/cx24116.c
524
printk(KERN_ERR "%s(): Unable initialise the firmware\n",
drivers/media/dvb-frontends/cx24116.c
542
printk(KERN_WARNING "%s() Firmware not responding\n",
drivers/media/dvb-frontends/cx24116.c
666
printk(KERN_INFO "%s: FW version %i.%i.%i.%i\n", __func__,
drivers/media/dvb-frontends/cx24116.c
873
printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone);
drivers/media/dvb-frontends/cx24116.c
963
printk(KERN_INFO "cx24116: %s(", __func__);
drivers/media/dvb-frontends/cx24116.c
965
printk(KERN_INFO "0x%02x", d->msg[i]);
drivers/media/dvb-frontends/cx24116.c
967
printk(KERN_INFO ", ");
drivers/media/dvb-frontends/cx24116.c
969
printk(") toneburst=%d\n", toneburst);
drivers/media/dvb-frontends/cx24116.h
40
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/cx24123.c
245
printk("%s: writereg error(err == %i, reg == 0x%02x, data == 0x%02x)\n",
drivers/media/dvb-frontends/cx24123.c
32
#define info(args...) do { printk(KERN_INFO "CX24123: " args); } while (0)
drivers/media/dvb-frontends/cx24123.c
33
#define err(args...) do { printk(KERN_ERR "CX24123: " args); } while (0)
drivers/media/dvb-frontends/cx24123.c
38
printk(KERN_DEBUG "CX24123: %s: ", __func__); \
drivers/media/dvb-frontends/cx24123.c
39
printk(args); \
drivers/media/dvb-frontends/cx24123.h
37
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/cx24123.h
43
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/cxd2820r.h
122
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0070.c
29
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/dvb-frontends/dib0070.h
57
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0070.h
63
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0070.h
69
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.c
29
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/dvb-frontends/dib0090.h
102
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.h
108
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.h
113
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.h
118
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.h
124
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.h
130
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.h
136
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.h
142
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.h
148
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.h
153
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.h
159
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.h
165
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.h
172
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.h
179
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib0090.h
96
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib3000.h
47
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib3000mb_priv.h
34
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/dvb-frontends/dib3000mc.c
31
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/dvb-frontends/dib3000mc.h
54
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib3000mc.h
63
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib3000mc.h
71
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib7000m.c
26
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/dvb-frontends/dib7000m.h
56
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib7000m.h
65
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib7000m.h
71
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib7000m.h
78
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib7000p.c
31
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/dvb-frontends/dib7000p.h
73
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib8000.c
36
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/dvb-frontends/dib8000.h
71
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib9000.c
26
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/dvb-frontends/dib9000.h
102
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib9000.h
108
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib9000.h
114
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib9000.h
120
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib9000.h
48
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib9000.h
54
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib9000.h
60
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib9000.h
66
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib9000.h
72
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib9000.h
78
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib9000.h
84
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib9000.h
90
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dib9000.h
96
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dibx000_common.c
16
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/dvb-frontends/drxd.h
49
printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n",
drivers/media/dvb-frontends/drxd_hard.c
1132
printk(KERN_ERR "invalid osc frequency %d\n", state->osc_clock_freq);
drivers/media/dvb-frontends/drxd_hard.c
1309
printk(KERN_ERR "Command Error\n");
drivers/media/dvb-frontends/drxd_hard.c
1493
printk(KERN_INFO "drxd: deviceId = %04x\n", deviceId);
drivers/media/dvb-frontends/drxd_hard.c
1500
printk(KERN_INFO "DRX3975D-A2\n");
drivers/media/dvb-frontends/drxd_hard.c
1503
printk(KERN_INFO "DRX397%dD-B1\n", deviceId);
drivers/media/dvb-frontends/drxd_hard.c
2938
printk(KERN_ERR "drxd: not found\n");
drivers/media/dvb-frontends/drxd_hard.c
294
printk(KERN_ERR "error in write_chunk\n");
drivers/media/dvb-frontends/drxd_hard.c
531
printk(KERN_ERR "Can't read SC_RA_RAM_LOCK__A status = %08x\n", status);
drivers/media/dvb-frontends/drxd_hard.c
895
printk(KERN_ERR "drxd: firmware load failure [%s]\n", fw_name);
drivers/media/dvb-frontends/drxk.h
70
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/drxk_hard.c
155
printk(KERN_DEBUG KBUILD_MODNAME ": %s " fmt, __func__, ##arg); \
drivers/media/dvb-frontends/ds3000.c
1080
printk(KERN_ERR "%s: Unable initialize firmware\n", __func__);
drivers/media/dvb-frontends/ds3000.c
239
printk(KERN_ERR "%s: writereg error(err == %i, reg == 0x%02x, value == 0x%02x)\n",
drivers/media/dvb-frontends/ds3000.c
26
printk(args); \
drivers/media/dvb-frontends/ds3000.c
285
printk(KERN_ERR "%s: write error(err == %i, reg == 0x%02x\n",
drivers/media/dvb-frontends/ds3000.c
321
printk(KERN_ERR "%s: reg=0x%x(error=%d)\n", __func__, reg, ret);
drivers/media/dvb-frontends/ds3000.c
347
printk(KERN_INFO "%s: Waiting for firmware upload (%s)...\n", __func__,
drivers/media/dvb-frontends/ds3000.c
351
printk(KERN_INFO "%s: Waiting for firmware upload(2)...\n", __func__);
drivers/media/dvb-frontends/ds3000.c
353
printk(KERN_ERR "%s: No firmware uploaded (timeout or file not found?)\n",
drivers/media/dvb-frontends/ds3000.c
360
printk("%s: Writing firmware to device failed\n", __func__);
drivers/media/dvb-frontends/ds3000.c
663
printk(KERN_ERR "%s: Invalid, tone=%d\n", __func__, tone);
drivers/media/dvb-frontends/ds3000.c
842
printk(KERN_ERR "Invalid probe, probably not a DS3000\n");
drivers/media/dvb-frontends/ds3000.c
846
printk(KERN_INFO "DS3000 chip version: %d.%d attached.\n",
drivers/media/dvb-frontends/ds3000.h
33
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/dvb-pll.c
19
printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg)
drivers/media/dvb-frontends/dvb-pll.h
60
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/gp8psk-fe.c
24
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/dvb-frontends/horus3a.h
52
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/isl6405.h
52
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/isl6421.h
33
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/isl6423.c
33
printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/isl6423.c
35
printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/isl6423.c
37
printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/isl6423.c
39
printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/isl6423.c
42
printk(format, ##arg); \
drivers/media/dvb-frontends/isl6423.h
45
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/itd1000.c
29
printk(KERN_DEBUG "ITD1000: " args);\
drivers/media/dvb-frontends/itd1000.c
34
printk(KERN_WARNING "ITD1000: " args); \
drivers/media/dvb-frontends/itd1000.c
38
printk(KERN_INFO "ITD1000: " args); \
drivers/media/dvb-frontends/itd1000.c
50
printk(KERN_WARNING
drivers/media/dvb-frontends/itd1000.c
62
printk(KERN_WARNING "itd1000 I2C write failed\n");
drivers/media/dvb-frontends/itd1000.h
23
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/ix2505v.c
18
printk(KERN_DEBUG "ix2505v: " args); \
drivers/media/dvb-frontends/ix2505v.h
48
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/l64781.c
264
printk(KERN_WARNING "Unexpected value for transmission_mode\n");
drivers/media/dvb-frontends/l64781.c
285
printk("Unexpected value for code_rate_HP\n");
drivers/media/dvb-frontends/l64781.c
304
printk("Unexpected value for code_rate_LP\n");
drivers/media/dvb-frontends/l64781.c
31
if (debug) printk(KERN_DEBUG "l64781: " args); \
drivers/media/dvb-frontends/l64781.c
319
printk(KERN_WARNING "Unexpected value for modulation\n");
drivers/media/dvb-frontends/l64781.c
335
printk("Unexpected value for hierarchy\n");
drivers/media/dvb-frontends/l64781.h
29
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/lg2160.c
20
printk(kern "%s: " fmt, __func__, ##arg)
drivers/media/dvb-frontends/lg2160.c
22
#define lg_info(fmt, arg...) printk(KERN_INFO "lg2160: " fmt, ##arg)
drivers/media/dvb-frontends/lg2160.h
64
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/lgdt3305.c
24
printk(kern "%s: " fmt, __func__, ##arg)
drivers/media/dvb-frontends/lgdt3305.c
26
#define lg_info(fmt, arg...) printk(KERN_INFO "lgdt3305: " fmt, ##arg)
drivers/media/dvb-frontends/lgdt3305.h
77
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/lgdt3306a.c
40
printk(KERN_DEBUG pr_fmt(fmt), ## arg)
drivers/media/dvb-frontends/lgdt3306a.h
64
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/lgdt330x.h
55
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/lgs8gl5.c
54
printk(KERN_DEBUG "lgs8gl5: " args); \
drivers/media/dvb-frontends/lgs8gl5.h
27
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/lgs8gxx.c
23
printk(KERN_DEBUG "lgs8gxx: " args); \
drivers/media/dvb-frontends/lgs8gxx.h
75
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/lnbh24.h
35
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/lnbh25.h
41
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/lnbh29.h
31
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/lnbp21.c
146
printk(KERN_INFO "LNBx2x attached on addr=%x\n", lnbp21->i2c_addr);
drivers/media/dvb-frontends/lnbp21.h
52
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/lnbp22.c
27
#define dprintk(lvl, arg...) if (debug >= (lvl)) printk(arg)
drivers/media/dvb-frontends/lnbp22.h
34
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/m88rs2000.c
44
printk(KERN_DEBUG "m88rs2000-fe: " args); \
drivers/media/dvb-frontends/m88rs2000.c
49
printk(KERN_INFO "m88rs2000-fe: " format "\n" , ## arg)
drivers/media/dvb-frontends/m88rs2000.h
38
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/mb86a16.c
46
printk(KERN_ERR "%s: " format "\n", __func__, ##arg); \
drivers/media/dvb-frontends/mb86a16.c
48
printk(KERN_NOTICE "%s: " format "\n", __func__, ##arg); \
drivers/media/dvb-frontends/mb86a16.c
50
printk(KERN_INFO "%s: " format "\n", __func__, ##arg); \
drivers/media/dvb-frontends/mb86a16.c
52
printk(KERN_DEBUG "%s: " format "\n", __func__, ##arg); \
drivers/media/dvb-frontends/mb86a16.c
55
printk(format, ##arg); \
drivers/media/dvb-frontends/mb86a16.h
35
printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/mb86a20s.h
43
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/mt312.c
101
printk(KERN_CONT " %02x", src[i]);
drivers/media/dvb-frontends/mt312.c
102
printk("\n");
drivers/media/dvb-frontends/mt312.c
44
printk(KERN_DEBUG "mt312: " args); \
drivers/media/dvb-frontends/mt312.c
69
printk(KERN_DEBUG "%s: ret == %d\n", __func__, ret);
drivers/media/dvb-frontends/mt312.c
77
printk(KERN_CONT " %02x", buf[i]);
drivers/media/dvb-frontends/mt312.c
78
printk("\n");
drivers/media/dvb-frontends/mt312.c
820
printk(KERN_WARNING "Only Zarlink VP310/MT312/ZL10313 are supported chips.\n");
drivers/media/dvb-frontends/mt312.c
92
printk(KERN_WARNING
drivers/media/dvb-frontends/mt312.h
33
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/mt352.c
41
if (debug) printk(KERN_DEBUG "mt352: " args); \
drivers/media/dvb-frontends/mt352.c
52
printk("mt352_write() to reg %x failed (err = %d)!\n", reg, err);
drivers/media/dvb-frontends/mt352.c
83
printk("%s: readreg error (reg=%d, ret==%i)\n",
drivers/media/dvb-frontends/mt352.h
47
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/nxt200x.h
38
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/nxt6000.c
34
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/dvb-frontends/nxt6000.h
31
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/or51132.c
110
printk(KERN_WARNING "or51132: I2C error reading register %d: %d\n",
drivers/media/dvb-frontends/or51132.c
135
printk(KERN_WARNING "or51132: load_firmware error 1\n");
drivers/media/dvb-frontends/or51132.c
140
printk(KERN_WARNING "or51132: load_firmware error 2\n");
drivers/media/dvb-frontends/or51132.c
145
printk(KERN_WARNING "or51132: load_firmware error 3\n");
drivers/media/dvb-frontends/or51132.c
149
printk(KERN_WARNING "or51132: load_firmware error 4\n");
drivers/media/dvb-frontends/or51132.c
159
printk(KERN_WARNING "or51132: load_firmware error a\n");
drivers/media/dvb-frontends/or51132.c
163
printk(KERN_WARNING "or51132: load_firmware error b\n");
drivers/media/dvb-frontends/or51132.c
167
printk(KERN_WARNING "or51132: load_firmware error c\n");
drivers/media/dvb-frontends/or51132.c
177
printk(KERN_WARNING
drivers/media/dvb-frontends/or51132.c
183
printk(KERN_WARNING
drivers/media/dvb-frontends/or51132.c
191
printk(KERN_WARNING "or51132: load_firmware error e\n");
drivers/media/dvb-frontends/or51132.c
252
printk(KERN_WARNING
drivers/media/dvb-frontends/or51132.c
260
printk(KERN_WARNING "or51132: set_mode error 1\n");
drivers/media/dvb-frontends/or51132.c
267
printk(KERN_WARNING "or51132: set_mode error 2\n");
drivers/media/dvb-frontends/or51132.c
322
printk("or51132: Modulation type(%d) UNSUPPORTED\n",
drivers/media/dvb-frontends/or51132.c
326
printk("or51132: Waiting for firmware upload(%s)...\n",
drivers/media/dvb-frontends/or51132.c
330
printk(KERN_WARNING "or51132: No firmware uploaded(timeout or file not found?)\n");
drivers/media/dvb-frontends/or51132.c
336
printk(KERN_WARNING "or51132: Writing firmware to device failed!\n");
drivers/media/dvb-frontends/or51132.c
339
printk("or51132: Firmware upload complete.\n");
drivers/media/dvb-frontends/or51132.c
37
if (debug) printk(KERN_DEBUG "or51132: " args); \
drivers/media/dvb-frontends/or51132.c
371
printk(KERN_WARNING "or51132: get_parameters: error reading receiver status\n");
drivers/media/dvb-frontends/or51132.c
387
printk(KERN_WARNING "or51132: unknown status 0x%02x\n",
drivers/media/dvb-frontends/or51132.c
408
printk(KERN_WARNING "or51132: read_status: error reading receiver status: %d\n", reg);
drivers/media/dvb-frontends/or51132.c
469
printk(KERN_WARNING "or51132: read_snr: error reading equalizer\n");
drivers/media/dvb-frontends/or51132.c
478
printk(KERN_WARNING "or51132: read_snr: error reading receiver status\n");
drivers/media/dvb-frontends/or51132.c
493
printk(KERN_WARNING "or51132: unknown status 0x%02x\n", reg&0xff);
drivers/media/dvb-frontends/or51132.c
68
printk(KERN_WARNING "or51132: I2C write (addr 0x%02x len %d) error: %d\n",
drivers/media/dvb-frontends/or51132.c
91
printk(KERN_WARNING "or51132: I2C read (addr 0x%02x len %d) error: %d\n",
drivers/media/dvb-frontends/or51132.h
30
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/or51211.h
33
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/s5h1409.c
312
printk(KERN_ERR "%s: error (reg == 0x%02x, val == 0x%04x, ret == %i)\n",
drivers/media/dvb-frontends/s5h1409.c
333
printk("%s: readreg error (ret == %i)\n", __func__, ret);
drivers/media/dvb-frontends/s5h1409.c
50
#define dprintk if (debug) printk
drivers/media/dvb-frontends/s5h1409.c
970
printk(KERN_ERR "%s: Failed to initialize correctly\n",
drivers/media/dvb-frontends/s5h1409.h
65
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/s5h1411.c
341
printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, ret == %i)\n",
drivers/media/dvb-frontends/s5h1411.c
360
printk(KERN_ERR "%s: readreg error (ret == %i)\n",
drivers/media/dvb-frontends/s5h1411.c
41
printk(arg); \
drivers/media/dvb-frontends/s5h1411.c
886
printk(KERN_ERR "%s: Failed to initialize correctly\n",
drivers/media/dvb-frontends/s5h1411.h
67
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/s5h1420.c
365
printk(KERN_ERR "s5h1420: avoided division by 0\n");
drivers/media/dvb-frontends/s5h1420.c
62
printk(KERN_DEBUG "S5H1420: " x); \
drivers/media/dvb-frontends/s5h1420.c
840
printk(KERN_WARNING
drivers/media/dvb-frontends/s5h1420.c
911
printk(KERN_ERR "S5H1420/PN1010: tuner i2c bus could not be initialized\n");
drivers/media/dvb-frontends/s5h1420.h
37
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/s5h1432.c
150
printk(KERN_INFO
drivers/media/dvb-frontends/s5h1432.c
241
printk(KERN_INFO " s5h1432_init().\n");
drivers/media/dvb-frontends/s5h1432.c
338
printk(KERN_INFO " Enter s5h1432_attach(). attach success!\n");
drivers/media/dvb-frontends/s5h1432.c
39
printk(arg); \
drivers/media/dvb-frontends/s5h1432.c
53
printk(KERN_ERR "%s: writereg error 0x%02x 0x%02x 0x%04x, ret == %i)\n",
drivers/media/dvb-frontends/s5h1432.c
73
printk(KERN_ERR "%s: readreg error (ret == %i)\n",
drivers/media/dvb-frontends/s5h1432.h
71
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/s921.c
209
printk("%s: writereg rcor(rc == %i, reg == 0x%02x, data == 0x%02x)\n",
drivers/media/dvb-frontends/s921.c
28
printk(KERN_ERR "s921: " args); \
drivers/media/dvb-frontends/s921.c
34
printk(KERN_DEBUG "s921: %s: ", __func__); \
drivers/media/dvb-frontends/s921.c
35
printk(args); \
drivers/media/dvb-frontends/s921.h
27
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/s921.h
33
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/si21xx.c
106
printk(KERN_DEBUG "si21xx: " args); \
drivers/media/dvb-frontends/si21xx.h
23
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/sp887x.c
156
printk ("%s: firmware upload... ", __func__);
drivers/media/dvb-frontends/sp887x.c
181
printk ("failed.\n");
drivers/media/dvb-frontends/sp887x.c
182
printk ("%s: i2c error (err == %i)\n", __func__, err);
drivers/media/dvb-frontends/sp887x.c
37
if (debug) printk(KERN_DEBUG "sp887x: " args); \
drivers/media/dvb-frontends/sp887x.c
46
printk ("%s: i2c write error (addr %02x, err == %i)\n",
drivers/media/dvb-frontends/sp887x.c
526
printk("sp887x: waiting for firmware upload (%s)...\n", SP887X_DEFAULT_FIRMWARE);
drivers/media/dvb-frontends/sp887x.c
529
printk("sp887x: no firmware upload (timeout or file not found?)\n");
drivers/media/dvb-frontends/sp887x.c
536
printk("sp887x: writing firmware to device failed\n");
drivers/media/dvb-frontends/sp887x.c
539
printk("sp887x: firmware upload complete\n");
drivers/media/dvb-frontends/sp887x.c
67
printk("%s: writereg error (reg %03x, data %03x, ret == %i)\n",
drivers/media/dvb-frontends/sp887x.c
85
printk("%s: readreg error (ret == %i)\n", __func__, ret);
drivers/media/dvb-frontends/sp887x.h
28
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/stb0899_drv.c
1630
printk("%s: Exiting .. !\n", __func__);
drivers/media/dvb-frontends/stb0899_drv.c
1634
printk("%s: Attaching STB0899 \n", __func__);
drivers/media/dvb-frontends/stb0899_drv.c
321
printk(KERN_ERR "%s ERR(1), Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Status=%d\n",
drivers/media/dvb-frontends/stb0899_drv.c
343
printk(KERN_ERR "%s ERR(2), Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Status=%d\n",
drivers/media/dvb-frontends/stb0899_drv.c
351
printk(KERN_ERR "%s ERR(3), Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Status=%d\n",
drivers/media/dvb-frontends/stb0899_drv.c
358
printk(KERN_DEBUG "%s Device=[0x%04x], Base address=[0x%08x], Offset=[0x%04x], Data=[0x%08x]\n",
drivers/media/dvb-frontends/stb0899_drv.c
415
printk(KERN_DEBUG "%s Device=[0x%04x], Base Address=[0x%08x], Offset=[0x%04x], Data=[0x%08x]\n",
drivers/media/dvb-frontends/stb0899_drv.c
421
printk(KERN_ERR "%s ERR (1), Device=[0x%04x], Base Address=[0x%08x], Offset=[0x%04x], Data=[0x%08x], status=%d\n",
drivers/media/dvb-frontends/stb0899_drv.c
428
printk(KERN_ERR "%s ERR (2), Device=[0x%04x], Base Address=[0x%08x], Offset=[0x%04x], Data=[0x%08x], status=%d\n",
drivers/media/dvb-frontends/stb0899_drv.c
463
printk(KERN_ERR "%s Read error, Reg=[0x%04x], Count=%u, Status=%d\n",
drivers/media/dvb-frontends/stb0899_drv.c
496
printk(KERN_WARNING
drivers/media/dvb-frontends/stb0899_drv.h
142
printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/stb0899_priv.h
25
printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/stb0899_priv.h
27
printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/stb0899_priv.h
29
printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/stb0899_priv.h
31
printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/stb0899_priv.h
34
printk(format, ##arg); \
drivers/media/dvb-frontends/stb6000.c
21
printk(KERN_DEBUG "stb6000: " args); \
drivers/media/dvb-frontends/stb6000.h
33
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/stb6100.c
185
printk(KERN_WARNING
drivers/media/dvb-frontends/stb6100.c
33
printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/stb6100.c
35
printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/stb6100.c
37
printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/stb6100.c
371
printk(KERN_ERR "%s: frequency out of range: %u kHz\n", __func__, frequency);
drivers/media/dvb-frontends/stb6100.c
39
printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/stb6100.c
42
printk(format, ##arg); \
drivers/media/dvb-frontends/stb6100.c
548
printk("%s: Attaching STB6100 \n", __func__);
drivers/media/dvb-frontends/stb6100.h
96
printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/stb6100_cfg.h
22
printk("%s: Invalid parameter\n", __func__);
drivers/media/dvb-frontends/stb6100_cfg.h
44
printk("%s: Invalid parameter\n", __func__);
drivers/media/dvb-frontends/stb6100_cfg.h
60
printk("%s: Invalid parameter\n", __func__);
drivers/media/dvb-frontends/stb6100_cfg.h
82
printk("%s: Invalid parameter\n", __func__);
drivers/media/dvb-frontends/stb6100_proc.h
105
printk(KERN_ERR "%s: Invalid parameter\n", __func__);
drivers/media/dvb-frontends/stb6100_proc.h
23
printk("%s: Invalid parameter\n", __func__);
drivers/media/dvb-frontends/stb6100_proc.h
52
printk("%s: Invalid parameter\n", __func__);
drivers/media/dvb-frontends/stb6100_proc.h
76
printk(KERN_ERR "%s: Invalid parameter\n", __func__);
drivers/media/dvb-frontends/stv0288.c
47
printk(KERN_DEBUG "stv0288: " args); \
drivers/media/dvb-frontends/stv0288.h
40
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/stv0297.c
31
#define dprintk(x...) printk(x)
drivers/media/dvb-frontends/stv0297.h
40
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/stv0299.c
412
printk ("%s switch command: 0x%04lx\n",__func__, cmd);
drivers/media/dvb-frontends/stv0299.c
436
printk ("%s(%d): switch delay (should be 32k followed by all 8k\n",
drivers/media/dvb-frontends/stv0299.c
439
printk("%d: %d\n", i,
drivers/media/dvb-frontends/stv0299.c
571
printk("stv0299 does not support auto-inversion\n");
drivers/media/dvb-frontends/stv0299.c
66
if (debug) printk(KERN_DEBUG "stv0299: " args); \
drivers/media/dvb-frontends/stv0299.h
93
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/stv0367.c
1016
printk(KERN_ERR "ALGO: wrong TUNER type selected\n");
drivers/media/dvb-frontends/stv0367.c
134
printk(KERN_DEBUG "%s: [%02x] %02x: %02x\n", __func__,
drivers/media/dvb-frontends/stv0367.c
139
printk(KERN_ERR "%s: i2c write error! ([%02x] %02x: %02x)\n",
drivers/media/dvb-frontends/stv0367.c
170
printk(KERN_ERR "%s: i2c read error ([%02x] %02x: %02x)\n",
drivers/media/dvb-frontends/stv0367.c
174
printk(KERN_DEBUG "%s: [%02x] %02x: %02x\n", __func__,
drivers/media/dvb-frontends/stv0367.c
2991
printk(KERN_ERR "Invalid symbol rate\n");
drivers/media/dvb-frontends/stv0367.c
346
printk(KERN_ERR "%s: Invalid parameter\n", __func__);
drivers/media/dvb-frontends/stv0367.c
37
printk(KERN_DEBUG args); \
drivers/media/dvb-frontends/stv0367.h
45
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/stv0367.h
52
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/stv0367.h
59
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/stv0900.h
53
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/stv0900_priv.h
37
printk(KERN_DEBUG args); \
drivers/media/dvb-frontends/stv090x.c
720
printk(KERN_WARNING
drivers/media/dvb-frontends/stv090x.h
113
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/stv090x_priv.h
24
printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/stv090x_priv.h
26
printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/stv090x_priv.h
28
printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/stv090x_priv.h
30
printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \
drivers/media/dvb-frontends/stv090x_priv.h
33
printk(format, ##arg); \
drivers/media/dvb-frontends/stv6110.c
37
printk(KERN_DEBUG args); \
drivers/media/dvb-frontends/stv6110.c
426
printk(KERN_INFO "STV6110 attached on addr=%x!\n", priv->i2c_address);
drivers/media/dvb-frontends/stv6110.c
70
printk(KERN_WARNING
drivers/media/dvb-frontends/stv6110.h
43
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/stv6110x.c
65
printk(KERN_WARNING
drivers/media/dvb-frontends/stv6110x.h
58
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/stv6110x_priv.h
23
printk(KERN_ERR "%s: " format "\n", __func__, ##arg); \
drivers/media/dvb-frontends/stv6110x_priv.h
25
printk(KERN_NOTICE "%s: " format "\n", __func__, ##arg); \
drivers/media/dvb-frontends/stv6110x_priv.h
27
printk(KERN_INFO "%s: " format "\n", __func__, ##arg); \
drivers/media/dvb-frontends/stv6110x_priv.h
29
printk(KERN_DEBUG "%s: " format "\n", __func__, ##arg); \
drivers/media/dvb-frontends/stv6110x_priv.h
32
printk(format, ##arg); \
drivers/media/dvb-frontends/tda10021.c
113
printk("tda10021: unlock tuner fails\n");
drivers/media/dvb-frontends/tda10021.c
36
#define dprintk(x...) printk(x)
drivers/media/dvb-frontends/tda10021.c
398
printk(sync & 2 ? "DVB: TDA10021(%d): AFC (%d) %dHz\n" :
drivers/media/dvb-frontends/tda10021.c
471
printk("TDA10021: i2c-addr = 0x%02x, id = 0x%02x\n",
drivers/media/dvb-frontends/tda10021.c
68
printk("DVB: TDA10021(%d): %s, writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
drivers/media/dvb-frontends/tda10021.c
86
printk("DVB: TDA10021: %s: readreg error (ret == %i)\n",
drivers/media/dvb-frontends/tda10021.c
99
printk("tda10021: lock tuner fails\n");
drivers/media/dvb-frontends/tda10023.c
124
printk("tda10023: lock tuner fails\n");
drivers/media/dvb-frontends/tda10023.c
138
printk("tda10023: unlock tuner fails\n");
drivers/media/dvb-frontends/tda10023.c
459
printk(sync & 2 ? "DVB: TDA10023(%d): AFC (%d) %dHz\n" :
drivers/media/dvb-frontends/tda10023.c
63
printk(KERN_ERR "DVB: TDA10023(%d): %s: readreg error (reg == 0x%02x, ret == %i)\n",
drivers/media/dvb-frontends/tda10023.c
78
printk(KERN_ERR "DVB: TDA10023(%d): %s, writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
drivers/media/dvb-frontends/tda1002x.h
55
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/tda1002x.h
69
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/tda10048.c
1063
printk(KERN_WARNING "%s() tda10048_config.dtv6_if_freq_khz is not set (defaulting to %d)\n",
drivers/media/dvb-frontends/tda10048.c
1070
printk(KERN_WARNING "%s() tda10048_config.dtv7_if_freq_khz is not set (defaulting to %d)\n",
drivers/media/dvb-frontends/tda10048.c
1077
printk(KERN_WARNING "%s() tda10048_config.dtv8_if_freq_khz is not set (defaulting to %d)\n",
drivers/media/dvb-frontends/tda10048.c
1084
printk(KERN_WARNING "%s() tda10048_config.clk_freq_khz is not set (defaulting to %d)\n",
drivers/media/dvb-frontends/tda10048.c
124
printk(KERN_DEBUG "tda10048: " fmt, ## arg);\
drivers/media/dvb-frontends/tda10048.c
223
printk("%s: writereg error (ret == %i)\n", __func__, ret);
drivers/media/dvb-frontends/tda10048.c
245
printk(KERN_ERR "%s: readreg error (ret == %i)\n",
drivers/media/dvb-frontends/tda10048.c
280
printk(KERN_ERR "%s(): writereg error err %i\n",
drivers/media/dvb-frontends/tda10048.c
404
printk(KERN_ERR "%s() invalid bandwidth\n", __func__);
drivers/media/dvb-frontends/tda10048.c
435
printk(KERN_ERR "%s() no default\n", __func__);
drivers/media/dvb-frontends/tda10048.c
449
printk(KERN_ERR "%s() Incorrect attach settings\n",
drivers/media/dvb-frontends/tda10048.c
488
printk(KERN_INFO "%s: waiting for firmware upload (%s)...\n",
drivers/media/dvb-frontends/tda10048.c
495
printk(KERN_ERR "%s: Upload failed. (file not found?)\n",
drivers/media/dvb-frontends/tda10048.c
499
printk(KERN_INFO "%s: firmware read %zu bytes.\n",
drivers/media/dvb-frontends/tda10048.c
506
printk(KERN_ERR "%s: firmware incorrect size\n", __func__);
drivers/media/dvb-frontends/tda10048.c
509
printk(KERN_INFO "%s: firmware uploading\n", __func__);
drivers/media/dvb-frontends/tda10048.c
561
printk(KERN_INFO "%s: firmware uploaded\n", __func__);
drivers/media/dvb-frontends/tda10048.c
564
printk(KERN_ERR "%s: firmware upload failed\n", __func__);
drivers/media/dvb-frontends/tda10048.h
72
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/tda1004x.c
1276
printk(KERN_ERR "Can't allocate memory for tda10045 state\n");
drivers/media/dvb-frontends/tda1004x.c
1288
printk(KERN_ERR "tda10045: chip is not answering. Giving up.\n");
drivers/media/dvb-frontends/tda1004x.c
1294
printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
drivers/media/dvb-frontends/tda1004x.c
1346
printk(KERN_ERR "Can't allocate memory for tda10046 state\n");
drivers/media/dvb-frontends/tda1004x.c
1358
printk(KERN_ERR "tda10046: chip is not answering. Giving up.\n");
drivers/media/dvb-frontends/tda1004x.c
1363
printk(KERN_ERR "Invalid tda1004x ID = 0x%02x. Can't proceed\n", id);
drivers/media/dvb-frontends/tda1004x.c
32
if (debug) printk(KERN_DEBUG "tda1004x: " args); \
drivers/media/dvb-frontends/tda1004x.c
331
printk(KERN_ERR "tda1004x: Error during firmware upload\n");
drivers/media/dvb-frontends/tda1004x.c
356
printk(KERN_ERR "tda1004x: timeout waiting for DSP ready\n");
drivers/media/dvb-frontends/tda1004x.c
371
printk(KERN_INFO "tda1004x: found firmware revision %x -- invalid\n", data2);
drivers/media/dvb-frontends/tda1004x.c
374
printk(KERN_INFO "tda1004x: found firmware revision %x -- ok\n", data2);
drivers/media/dvb-frontends/tda1004x.c
389
printk(KERN_INFO "tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE);
drivers/media/dvb-frontends/tda1004x.c
392
printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
drivers/media/dvb-frontends/tda1004x.c
409
printk(KERN_INFO "tda1004x: firmware upload complete\n");
drivers/media/dvb-frontends/tda1004x.c
431
printk(KERN_INFO "tda1004x: setting up plls for 53MHz sampling clock\n");
drivers/media/dvb-frontends/tda1004x.c
434
printk(KERN_INFO "tda1004x: setting up plls for 48MHz sampling clock\n");
drivers/media/dvb-frontends/tda1004x.c
516
printk(KERN_INFO "tda1004x: trying to boot from eeprom\n");
drivers/media/dvb-frontends/tda1004x.c
529
printk(KERN_INFO "tda1004x: waiting for firmware upload...\n");
drivers/media/dvb-frontends/tda1004x.c
535
printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n");
drivers/media/dvb-frontends/tda1004x.c
538
printk(KERN_INFO "tda1004x: please rename the firmware file to %s\n",
drivers/media/dvb-frontends/tda1004x.c
543
printk(KERN_ERR "tda1004x: no request function defined, can't upload from file\n");
drivers/media/dvb-frontends/tda1004x.c
609
printk("tda1004x: firmware upload failed\n");
drivers/media/dvb-frontends/tda1004x.c
639
printk("tda1004x: firmware upload failed\n");
drivers/media/dvb-frontends/tda1004x.h
117
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/tda1004x.h
123
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/tda10086.c
168
printk("%s: diseqc queue not ready, command may be lost.\n", __func__);
drivers/media/dvb-frontends/tda10086.c
36
if (debug) printk(KERN_DEBUG "tda10086: " args); \
drivers/media/dvb-frontends/tda10086.h
43
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/tda18271c2dd.c
118
printk(KERN_ERR "tda18271c2dd: i2c write error at addr %i\n", adr);
drivers/media/dvb-frontends/tda18271c2dd.c
130
printk(KERN_WARNING
drivers/media/dvb-frontends/tda18271c2dd.c
574
printk(KERN_ERR "tda18271c2dd: %s %d RF1 = %d A1 = %d B1 = %d RF2 = %d A2 = %d B2 = %d RF3 = %d\n", __func__,
drivers/media/dvb-frontends/tda18271c2dd.c
602
printk(KERN_ERR "tda18271c2dd: %s Search map failed\n", __func__);
drivers/media/dvb-frontends/tda18271c2dd.c
990
printk(KERN_ERR "tda18271c2dd: %s SearchMap failed\n", __func__);
drivers/media/dvb-frontends/tda18271c2dd.h
12
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/tda665x.c
100
printk(KERN_ERR "%s: Frequency beyond limits, frequency=%d\n",
drivers/media/dvb-frontends/tda665x.c
157
printk(KERN_DEBUG "%s: Waiting to Phase LOCK\n", __func__);
drivers/media/dvb-frontends/tda665x.c
165
printk(KERN_DEBUG "%s: Tuner Phase locked: status=%d\n",
drivers/media/dvb-frontends/tda665x.c
169
printk(KERN_ERR "%s: No Phase lock: status=%d\n",
drivers/media/dvb-frontends/tda665x.c
175
printk(KERN_ERR "%s: I/O Error\n", __func__);
drivers/media/dvb-frontends/tda665x.c
226
printk(KERN_DEBUG "%s: Attaching TDA665x (%s) tuner\n", __func__, info->name);
drivers/media/dvb-frontends/tda665x.c
37
printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err);
drivers/media/dvb-frontends/tda665x.c
53
printk(KERN_ERR "%s: I/O Error err=<%d>\n", __func__, err);
drivers/media/dvb-frontends/tda665x.c
79
printk(KERN_DEBUG "%s: Tuner Phase Locked\n", __func__);
drivers/media/dvb-frontends/tda665x.c
85
printk(KERN_ERR "%s: I/O Error\n", __func__);
drivers/media/dvb-frontends/tda665x.h
34
printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/tda8083.c
35
if (debug) printk(KERN_DEBUG "tda8083: " args); \
drivers/media/dvb-frontends/tda8083.h
33
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/tda8261.h
37
printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/tda826x.c
20
if (debug) printk(KERN_DEBUG "tda826x: " args); \
drivers/media/dvb-frontends/tda826x.h
36
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/ts2020.h
69
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/tua6100.c
49
printk("%s: i2c error\n", __func__);
drivers/media/dvb-frontends/tua6100.h
30
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/ves1820.c
314
printk(sync & 2 ? "ves1820: AFC (%d) %dHz\n" :
drivers/media/dvb-frontends/ves1820.c
384
printk("ves1820: pwm=0x%02x\n", state->pwm);
drivers/media/dvb-frontends/ves1820.c
56
printk("ves1820: %s(): writereg error (reg == 0x%02x, val == 0x%02x, ret == %i)\n",
drivers/media/dvb-frontends/ves1820.c
75
printk("ves1820: %s(): readreg error (reg == 0x%02x, ret == %i)\n",
drivers/media/dvb-frontends/ves1820.h
39
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/ves1x93.c
40
#define dprintk if (debug) printk
drivers/media/dvb-frontends/ves1x93.c
465
printk("ves1x93: Detected ves1893a rev1\n");
drivers/media/dvb-frontends/ves1x93.c
473
printk("ves1x93: Detected ves1893a rev2\n");
drivers/media/dvb-frontends/ves1x93.c
481
printk("ves1x93: Detected ves1993\n");
drivers/media/dvb-frontends/ves1x93.h
37
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/zd1301_demod.h
48
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/zd1301_demod.h
54
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/zl10036.c
111
printk(KERN_CONT " %02x", buf[i]);
drivers/media/dvb-frontends/zl10036.c
112
printk(KERN_CONT "\n");
drivers/media/dvb-frontends/zl10036.c
118
printk(KERN_ERR "%s: i2c error, ret=%d\n", __func__, ret);
drivers/media/dvb-frontends/zl10036.c
27
do { if (zl10036_debug & level) printk(KERN_DEBUG "zl10036: " args); \
drivers/media/dvb-frontends/zl10036.c
456
printk(KERN_ERR "%s: no config specified", __func__);
drivers/media/dvb-frontends/zl10036.c
472
printk(KERN_ERR "%s: No zl10036 found\n", __func__);
drivers/media/dvb-frontends/zl10036.c
478
printk(KERN_ERR "%s: tuner initialization failed\n",
drivers/media/dvb-frontends/zl10036.c
490
printk(KERN_INFO "%s: tuner initialization (%s addr=0x%02x) ok\n",
drivers/media/dvb-frontends/zl10036.c
68
printk(KERN_ERR "%s: i2c read failed at addr=%02x\n",
drivers/media/dvb-frontends/zl10036.h
35
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/zl10039.c
25
printk(KERN_DEBUG args); \
drivers/media/dvb-frontends/zl10039.c
99
printk(KERN_WARNING
drivers/media/dvb-frontends/zl10039.h
21
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/dvb-frontends/zl10353.c
101
printk(KERN_CONT " %02x", (u8)ret);
drivers/media/dvb-frontends/zl10353.c
103
printk(KERN_CONT " --");
drivers/media/dvb-frontends/zl10353.c
107
printk(KERN_CONT "\n");
drivers/media/dvb-frontends/zl10353.c
34
if (debug) printk(KERN_DEBUG "zl10353: " args); \
drivers/media/dvb-frontends/zl10353.c
47
printk("zl10353: write to reg %x failed (err = %d)!\n", reg, err);
drivers/media/dvb-frontends/zl10353.c
78
printk("%s: readreg error (reg=%d, ret==%i)\n",
drivers/media/dvb-frontends/zl10353.c
96
printk(KERN_CONT "\n");
drivers/media/dvb-frontends/zl10353.c
97
printk(KERN_DEBUG "%02x:", reg);
drivers/media/dvb-frontends/zl10353.h
43
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/firewire/firedtv-avc.c
214
printk(KERN_INFO "%ssu=%x.%x l=%d: %-8s - %s\n",
drivers/media/firewire/firedtv-avc.c
225
printk(KERN_INFO "APP PMT -> l=%d\n", length);
drivers/media/i2c/bt856.c
76
printk(KERN_CONT " %02x", encoder->reg[i]);
drivers/media/i2c/bt856.c
77
printk(KERN_CONT "\n");
drivers/media/i2c/mt9p031.c
1159
printk(KERN_INFO "%s: control initialization error %d\n",
drivers/media/i2c/ov7670.c
516
printk(KERN_ERR "Error %d on register write\n", ret);
drivers/media/i2c/tvaudio.c
1945
printk(KERN_INFO "tvaudio: TV audio decoder + audio/video mux driver\n");
drivers/media/i2c/tvaudio.c
1946
printk(KERN_INFO "tvaudio: known chips: ");
drivers/media/i2c/tvaudio.c
1948
printk(KERN_CONT "%s%s",
drivers/media/i2c/tvaudio.c
1950
printk(KERN_CONT "\n");
drivers/media/i2c/tvaudio.c
295
printk(KERN_CONT " 0x%x", cmd->bytes[i]);
drivers/media/i2c/tvaudio.c
299
printk(KERN_CONT "\n");
drivers/media/pci/b2c2/flexcop-pci.c
22
do { if ((debug & (level))) printk(args); } while (0)
drivers/media/pci/bt8xx/bt878.c
136
printk(KERN_ERR "bt878: buffer size error!\n");
drivers/media/pci/bt8xx/bt878.c
267
printk(KERN_INFO
drivers/media/pci/bt8xx/bt878.c
278
printk(KERN_INFO
drivers/media/pci/bt8xx/bt878.c
291
printk(KERN_INFO
drivers/media/pci/bt8xx/bt878.c
310
printk(KERN_ERR
drivers/media/pci/bt8xx/bt878.c
405
printk(KERN_INFO "bt878: Bt878 AUDIO function found (%d).\n",
drivers/media/pci/bt8xx/bt878.c
408
printk(KERN_ERR "bt878: Too many devices inserted\n");
drivers/media/pci/bt8xx/bt878.c
417
printk(KERN_INFO "%s: card id=[0x%x],[ %s ] has DVB functions.\n",
drivers/media/pci/bt8xx/bt878.c
438
printk(KERN_INFO "bt878(%d): Bt%x (rev %d) at %02x:%02x.%x, ",
drivers/media/pci/bt8xx/bt878.c
441
printk("irq: %d, latency: %d, memory: 0x%lx\n",
drivers/media/pci/bt8xx/bt878.c
456
printk(KERN_ERR "bt878(%d): Bad irq number or handler\n",
drivers/media/pci/bt8xx/bt878.c
461
printk(KERN_ERR
drivers/media/pci/bt8xx/bt878.c
473
printk(KERN_ERR "bt878: failed to allocate memory!\n");
drivers/media/pci/bt8xx/bt878.c
502
printk(KERN_INFO "bt878(%d): unloading\n", bt->nr);
drivers/media/pci/bt8xx/bt878.c
518
printk(KERN_DEBUG "bt878_mem: 0x%p.\n", bt->bt878_mem);
drivers/media/pci/bt8xx/bt878.c
550
printk(KERN_INFO "bt878: AUDIO driver version %d.%d.%d loaded\n",
drivers/media/pci/bt8xx/bt878.c
64
printk(KERN_DEBUG fmt, ##arg); \
drivers/media/pci/bt8xx/btcx-risc.c
31
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/pci/bt8xx/bttvp.h
275
printk(fmt, ##__VA_ARGS__); \
drivers/media/pci/bt8xx/dst.c
41
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/pci/bt8xx/dst_ca.c
29
printk(KERN_ERR "%s: " format "\n", __func__ , ##arg); \
drivers/media/pci/bt8xx/dst_ca.c
31
printk(KERN_NOTICE "%s: " format "\n", __func__ , ##arg); \
drivers/media/pci/bt8xx/dst_ca.c
33
printk(KERN_INFO "%s: " format "\n", __func__ , ##arg); \
drivers/media/pci/bt8xx/dst_ca.c
35
printk(KERN_DEBUG "%s: " format "\n", __func__ , ##arg); \
drivers/media/pci/bt8xx/dst_ca.c
38
printk(format, ## arg); \
drivers/media/pci/bt8xx/dvb-bt8xx.c
35
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/pci/cx18/cx18-alsa-main.c
185
printk(KERN_ERR "cx18-alsa: %s: struct v4l2_device * is NULL\n",
drivers/media/pci/cx18/cx18-alsa-main.c
192
printk(KERN_ERR "cx18-alsa cx is NULL\n");
drivers/media/pci/cx18/cx18-alsa-main.c
221
printk(KERN_INFO "cx18-alsa: module loading...\n");
drivers/media/pci/cx18/cx18-alsa-main.c
242
printk(KERN_ERR "cx18-alsa: %s: struct v4l2_device * is NULL\n",
drivers/media/pci/cx18/cx18-alsa-main.c
263
printk(KERN_INFO "cx18-alsa: module unloading...\n");
drivers/media/pci/cx18/cx18-alsa-main.c
270
printk(KERN_INFO "cx18-alsa: module unload complete\n");
drivers/media/pci/cx18/cx18-alsa-main.c
33
printk(KERN_INFO "%s: " fmt, "cx18-alsa", ## arg); \
drivers/media/pci/cx18/cx18-alsa-pcm.c
33
printk(KERN_INFO "cx18-alsa-pcm %s: " fmt, \
drivers/media/pci/cx18/cx18-alsa.h
43
printk(KERN_INFO "%s-alsa: " type ": " fmt, \
drivers/media/pci/cx18/cx18-alsa.h
54
printk(KERN_ERR "%s-alsa: " fmt, v4l2_dev->name , ## args)
drivers/media/pci/cx18/cx18-alsa.h
57
printk(KERN_WARNING "%s-alsa: " fmt, v4l2_dev->name , ## args)
drivers/media/pci/cx18/cx18-alsa.h
60
printk(KERN_INFO "%s-alsa: " fmt, v4l2_dev->name , ## args)
drivers/media/pci/cx18/cx18-driver.c
1310
printk(KERN_INFO "cx18: Start initialization, version %s\n",
drivers/media/pci/cx18/cx18-driver.c
1315
printk(KERN_ERR "cx18: Exiting, cx18_first_minor must be between 0 and %d\n",
drivers/media/pci/cx18/cx18-driver.c
1322
printk(KERN_INFO "cx18: Debug value must be >= 0 and <= 511!\n");
drivers/media/pci/cx18/cx18-driver.c
1326
printk(KERN_ERR "cx18: Error detecting PCI card\n");
drivers/media/pci/cx18/cx18-driver.c
1329
printk(KERN_INFO "cx18: End initialization\n");
drivers/media/pci/cx18/cx18-driver.c
303
printk(KERN_CONT " %02x", eedata[i]);
drivers/media/pci/cx18/cx18-driver.c
305
printk(KERN_CONT "\n");
drivers/media/pci/cx18/cx18-driver.c
897
printk(KERN_ERR "cx18: cannot manage card %d, driver has a limit of 0 - %d\n",
drivers/media/pci/cx18/cx18-driver.c
911
printk(KERN_ERR "cx18: v4l2_device_register of card %d failed\n",
drivers/media/pci/cx23885/altera-ci.c
83
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/pci/cx23885/altera-ci.c
90
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/pci/cx23885/cimax2.c
61
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/pci/cx23885/cx23885-417.c
49
printk(KERN_DEBUG pr_fmt("%s: 417:" fmt), \
drivers/media/pci/cx23885/cx23885-alsa.c
36
printk(KERN_DEBUG pr_fmt("%s: alsa: " fmt), \
drivers/media/pci/cx23885/cx23885-core.c
420
printk(KERN_DEBUG "0x%08x [ %s", risc,
drivers/media/pci/cx23885/cx23885-core.c
62
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/pci/cx23885/cx23885-dvb.c
74
printk(KERN_DEBUG pr_fmt("%s dvb: " fmt), \
drivers/media/pci/cx23885/cx23885-i2c.c
112
printk(KERN_DEBUG " <W %02x %02x", msg->addr << 1, msg->buf[0]);
drivers/media/pci/cx23885/cx23885-i2c.c
27
printk(KERN_DEBUG pr_fmt("%s: i2c:" fmt), \
drivers/media/pci/cx23885/cx23885-vbi.c
25
printk(KERN_DEBUG pr_fmt("%s: vbi:" fmt), \
drivers/media/pci/cx23885/cx23885-video.c
60
printk(KERN_DEBUG pr_fmt("%s: video:" fmt), \
drivers/media/pci/cx25821/cx25821-alsa.c
42
printk(KERN_DEBUG "%s/1: " fmt, chip->dev->name, ##arg); \
drivers/media/pci/cx25821/cx25821-core.c
1239
printk(KERN_DEBUG pr_fmt("%s: %s [0x%x]"), name, tag, bits);
drivers/media/pci/cx25821/cx25821-i2c.c
119
printk(" >\n");
drivers/media/pci/cx25821/cx25821-i2c.c
27
printk(KERN_DEBUG "%s/0: " fmt, dev->name, ##arg); \
drivers/media/pci/cx25821/cx25821-video.h
35
printk(KERN_DEBUG "%s/0: " fmt, dev->name, ##arg); \
drivers/media/pci/cx88/cx88-alsa.c
36
printk(KERN_DEBUG pr_fmt("%s: alsa: " fmt), \
drivers/media/pci/cx88/cx88-blackbird.c
40
printk(KERN_DEBUG pr_fmt("%s: blackbird:" fmt), \
drivers/media/pci/cx88/cx88-cards.c
41
printk(KERN_DEBUG pr_fmt("%s: core:" fmt), \
drivers/media/pci/cx88/cx88-core.c
51
printk(KERN_DEBUG pr_fmt("%s: core:" fmt), \
drivers/media/pci/cx88/cx88-core.c
56
printk(KERN_DEBUG pr_fmt("%s: core:" fmt), \
drivers/media/pci/cx88/cx88-dsp.c
66
printk(KERN_DEBUG pr_fmt("%s: dsp:" fmt), \
drivers/media/pci/cx88/cx88-dvb.c
69
printk(KERN_DEBUG pr_fmt("%s: dvb:" fmt), \
drivers/media/pci/cx88/cx88-i2c.c
38
printk(KERN_DEBUG pr_fmt("%s: i2c:" fmt), \
drivers/media/pci/cx88/cx88-input.c
58
printk(KERN_DEBUG "%s IR: " fmt, ir->core->name, ##arg);\
drivers/media/pci/cx88/cx88-input.c
63
printk(KERN_DEBUG "cx88 IR: " fmt, ##arg); \
drivers/media/pci/cx88/cx88-mpeg.c
37
printk(KERN_DEBUG pr_fmt("%s: mpeg:" fmt), \
drivers/media/pci/cx88/cx88-tvaudio.c
56
printk(KERN_DEBUG pr_fmt("%s: tvaudio:" fmt), \
drivers/media/pci/cx88/cx88-vbi.c
17
printk(KERN_DEBUG pr_fmt("%s: vbi:" fmt), \
drivers/media/pci/cx88/cx88-video.c
63
printk(KERN_DEBUG pr_fmt("%s: video:" fmt), \
drivers/media/pci/dm1105/dm1105.c
288
printk(KERN_ERR
drivers/media/pci/dm1105/dm1105.c
296
printk(KERN_ERR
drivers/media/pci/dm1105/dm1105.c
303
printk(KERN_ERR "Here is a list of valid choices for the card=<n> insmod option:\n");
drivers/media/pci/dm1105/dm1105.c
305
printk(KERN_ERR "dm1105: card=%d -> %s\n",
drivers/media/pci/dm1105/dm1105.c
383
printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
drivers/media/pci/dm1105/dm1105.c
393
printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
drivers/media/pci/dm1105/dm1105.c
403
printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
drivers/media/pci/dm1105/dm1105.c
413
printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
drivers/media/pci/dm1105/dm1105.c
424
printk(KERN_ERR "%s: Only 18 GPIO's are allowed\n", __func__);
drivers/media/pci/dm1105/dm1105.c
660
printk(KERN_INFO "%s: received byte 0x%04x\n", __func__, ircom);
drivers/media/pci/ivtv/ivtv-alsa-main.c
25
printk(KERN_INFO pr_fmt("%s: alsa:" __fmt), \
drivers/media/pci/ivtv/ivtvfb.c
118
printk(KERN_INFO "ivtvfb%d " type ": " fmt, itv->instance , ## args); \
drivers/media/pci/ivtv/ivtvfb.c
124
#define IVTVFB_ERR(fmt, args...) printk(KERN_ERR "ivtvfb%d: " fmt, itv->instance , ## args)
drivers/media/pci/ivtv/ivtvfb.c
125
#define IVTVFB_WARN(fmt, args...) printk(KERN_WARNING "ivtvfb%d: " fmt, itv->instance , ## args)
drivers/media/pci/ivtv/ivtvfb.c
126
#define IVTVFB_INFO(fmt, args...) printk(KERN_INFO "ivtvfb%d: " fmt, itv->instance , ## args)
drivers/media/pci/mantis/mantis_common.h
30
printk(KERN_ERR "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
drivers/media/pci/mantis/mantis_common.h
32
printk(KERN_NOTICE "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
drivers/media/pci/mantis/mantis_common.h
34
printk(KERN_INFO "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
drivers/media/pci/mantis/mantis_common.h
36
printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
drivers/media/pci/mantis/mantis_common.h
38
printk(KERN_DEBUG "%s (%d): " format "\n" , __func__ , mantis->num , ##arg); \
drivers/media/pci/mantis/mantis_common.h
41
printk(format , ##arg); \
drivers/media/pci/pluto2/pluto2.c
566
printk(KERN_CONT "%c", val & 0xff);
drivers/media/pci/pluto2/pluto2.c
571
printk(KERN_CONT "\n");
drivers/media/pci/saa7134/saa7134-cards.c
7854
printk(KERN_WARNING "%s: Unable to enable IF of the tuner.\n", dev->name);
drivers/media/pci/saa7134/saa7134-core.c
89
printk(KERN_DEBUG pr_fmt("core: " fmt), ## arg); \
drivers/media/pci/saa7134/saa7134-core.c
94
printk(KERN_DEBUG pr_fmt("irq: " fmt), ## arg); \
drivers/media/pci/saa7134/saa7134-i2c.c
33
printk(KERN_DEBUG pr_fmt("i2c: " fmt), ## arg); \
drivers/media/pci/saa7134/saa7134-input.c
32
printk(KERN_DEBUG pr_fmt("input: " fmt), ## arg); \
drivers/media/pci/saa7134/saa7134-input.c
36
printk(KERN_DEBUG pr_fmt("ir %s: " fmt), ir->rc->device_name, \
drivers/media/pci/saa7134/saa7134-ts.c
27
printk(KERN_DEBUG pr_fmt("ts: " fmt), ## arg); \
drivers/media/pci/saa7134/saa7134-tvaudio.c
41
printk(KERN_DEBUG pr_fmt("audio: " fmt), ## arg); \
drivers/media/pci/saa7134/saa7134-vbi.c
30
printk(KERN_DEBUG pr_fmt("vbi: " fmt), ## arg); \
drivers/media/pci/saa7134/saa7134-video.c
44
printk(KERN_DEBUG pr_fmt("video: " fmt), ## arg); \
drivers/media/pci/saa7164/saa7164-api.c
108
printk(KERN_ERR "%s() set error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
114
printk(KERN_ERR "%s() get error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
124
printk(KERN_ERR "%s() commit error, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-api.c
130
printk(KERN_ERR "%s() GET commit error, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-api.c
1322
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
1336
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
134
printk(KERN_ERR "%s() memcmp error, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-api.c
1378
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-api.c
1387
printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
1400
printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
1432
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-api.c
1440
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-api.c
1449
printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
145
printk(KERN_ERR "%s() compare failed\n", __func__);
drivers/media/pci/saa7164/saa7164-api.c
1472
printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
1495
printk(KERN_ERR "%s() error, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-api.c
168
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
191
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
197
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
212
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
223
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__,
drivers/media/pci/saa7164/saa7164-api.c
251
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
257
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
262
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
267
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
272
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
277
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
286
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
30
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
32
printk(KERN_INFO "saa7164[%d]-CPU: %d percent", dev->nr, i->CPULoad);
drivers/media/pci/saa7164/saa7164-api.c
349
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
383
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
397
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
434
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
440
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
447
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
452
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
468
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
486
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
491
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
496
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
511
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
517
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
52
printk(KERN_ERR "%s() error, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-api.c
522
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
550
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
564
printk(KERN_ERR "%s() TU_STANDARD_CONTROL error, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-api.c
58
printk(KERN_INFO "saa7164[%d]-FWMSG: %s", dev->nr,
drivers/media/pci/saa7164/saa7164-api.c
585
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-api.c
600
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
650
printk(KERN_ERR "%s() error, ret(1) = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
657
printk(KERN_ERR "%s() error, ret(2) = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
76
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
779
printk(KERN_ERR "%s(portnr %d unitid 0x%x) error, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-api.c
792
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-api.c
86
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-bus.c
130
printk(KERN_ERR "%s() !msg\n", __func__);
drivers/media/pci/saa7164/saa7164-bus.c
139
printk(KERN_ERR "%s() Exceeded dev->bus.m_wMaxReqSize\n",
drivers/media/pci/saa7164/saa7164-bus.c
145
printk(KERN_ERR "%s() Missing message buffer\n", __func__);
drivers/media/pci/saa7164/saa7164-bus.c
179
printk(KERN_ERR "%s() bus timeout\n", __func__);
drivers/media/pci/saa7164/saa7164-bus.c
320
printk(KERN_ERR "%s() Exceeded dev->bus.m_wMaxReqSize\n",
drivers/media/pci/saa7164/saa7164-bus.c
326
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-bus.c
357
printk(KERN_ERR "%s() No message/response found\n", __func__);
drivers/media/pci/saa7164/saa7164-bus.c
395
printk(KERN_ERR "%s() Unexpected msg miss-match\n", __func__);
drivers/media/pci/saa7164/saa7164-bus.c
416
printk(KERN_ERR "%s() Invalid bus state, missing msg or mangled ring, faulty H/W / bad code?\n",
drivers/media/pci/saa7164/saa7164-cards.c
699
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-cards.c
707
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-cards.c
715
printk(KERN_ERR "%s: Here are valid choices for the card=<n> insmod option:\n",
drivers/media/pci/saa7164/saa7164-cards.c
719
printk(KERN_ERR "%s: card=%d -> %s\n",
drivers/media/pci/saa7164/saa7164-cards.c
818
printk(KERN_ERR "%s: Warning: Unknown Hauppauge model #%d\n",
drivers/media/pci/saa7164/saa7164-cards.c
823
printk(KERN_INFO "%s: Hauppauge eeprom: model=%d\n", dev->name,
drivers/media/pci/saa7164/saa7164-cmd.c
102
printk(KERN_ERR "%s() ret = %x\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-cmd.c
143
printk(KERN_ERR "found timed out command on the bus\n");
drivers/media/pci/saa7164/saa7164-cmd.c
147
printk(KERN_ERR "ret = %x\n", ret);
drivers/media/pci/saa7164/saa7164-cmd.c
156
printk(KERN_ERR "split response\n");
drivers/media/pci/saa7164/saa7164-cmd.c
160
printk(KERN_ERR " timeout continue\n");
drivers/media/pci/saa7164/saa7164-cmd.c
183
printk(KERN_ERR "%s() !msg\n", __func__);
drivers/media/pci/saa7164/saa7164-cmd.c
205
printk(KERN_ERR "%s() set failed %d\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-cmd.c
225
printk(KERN_ERR "%s() set last failed %d\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-cmd.c
292
printk(KERN_ERR "%s(seqno=%d) seqno is invalid\n",
drivers/media/pci/saa7164/saa7164-cmd.c
315
printk(KERN_ERR "%s() Invalid param\n", __func__);
drivers/media/pci/saa7164/saa7164-cmd.c
332
printk(KERN_ERR "%s() No free sequences\n", __func__);
drivers/media/pci/saa7164/saa7164-cmd.c
351
printk(KERN_ERR "%s() set command failed %d\n", __func__, ret);
drivers/media/pci/saa7164/saa7164-cmd.c
375
printk(KERN_ERR "Event timed out\n");
drivers/media/pci/saa7164/saa7164-cmd.c
381
printk(KERN_ERR "spurious error\n");
drivers/media/pci/saa7164/saa7164-cmd.c
392
printk(KERN_ERR "peek failed\n");
drivers/media/pci/saa7164/saa7164-cmd.c
414
printk(KERN_ERR "dequeue failed, ret = %d\n",
drivers/media/pci/saa7164/saa7164-cmd.c
417
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-cmd.c
432
printk(KERN_ERR "get error(2)\n");
drivers/media/pci/saa7164/saa7164-cmd.c
479
printk(KERN_ERR "dequeue(2) failed\n");
drivers/media/pci/saa7164/saa7164-cmd.c
497
printk(KERN_ERR "get failed\n");
drivers/media/pci/saa7164/saa7164-cmd.c
503
printk(KERN_ERR "dequeue(3) failed\n");
drivers/media/pci/saa7164/saa7164-cmd.c
510
printk(KERN_ERR "get failed\n");
drivers/media/pci/saa7164/saa7164-cmd.c
522
printk(KERN_ERR "dequeue(3) failed\n");
drivers/media/pci/saa7164/saa7164-cmd.c
534
printk(KERN_ERR "dequeue(4) failed\n");
drivers/media/pci/saa7164/saa7164-cmd.c
96
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-core.c
1027
printk(KERN_INFO
drivers/media/pci/saa7164/saa7164-core.c
1229
printk(KERN_WARNING "%s() MSI disabled by module parameter 'enable_msi'"
drivers/media/pci/saa7164/saa7164-core.c
1237
printk(KERN_ERR "%s() Failed to enable MSI interrupt. Falling back to a shared IRQ\n",
drivers/media/pci/saa7164/saa7164-core.c
1248
printk(KERN_ERR "%s() Failed to get an MSI interrupt. Falling back to a shared IRQ\n",
drivers/media/pci/saa7164/saa7164-core.c
128
printk(KERN_ERR "video cc last = %x current = %x i = %d\n",
drivers/media/pci/saa7164/saa7164-core.c
1289
printk(KERN_INFO "%s/0: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
drivers/media/pci/saa7164/saa7164-core.c
1299
printk("%s/0: Oops: no 32bit PCI DMA ???\n", dev->name);
drivers/media/pci/saa7164/saa7164-core.c
1314
printk(KERN_ERR "%s: can't get IRQ %d\n", dev->name,
drivers/media/pci/saa7164/saa7164-core.c
1339
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-core.c
1350
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-core.c
1366
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-core.c
138
printk(KERN_ERR "audio cc last = %x current = %x i = %d\n",
drivers/media/pci/saa7164/saa7164-core.c
1387
printk(KERN_ERR "%s() Failed to register dvb adapters on porta\n",
drivers/media/pci/saa7164/saa7164-core.c
1394
printk(KERN_ERR"%s() Failed to register dvb adapters on portb\n",
drivers/media/pci/saa7164/saa7164-core.c
1401
printk(KERN_ERR"%s() Failed to register mpeg encoder\n",
drivers/media/pci/saa7164/saa7164-core.c
1408
printk(KERN_ERR"%s() Failed to register mpeg encoder\n",
drivers/media/pci/saa7164/saa7164-core.c
1415
printk(KERN_ERR"%s() Failed to register vbi device\n",
drivers/media/pci/saa7164/saa7164-core.c
1422
printk(KERN_ERR"%s() Failed to register vbi device\n",
drivers/media/pci/saa7164/saa7164-core.c
1433
printk(KERN_ERR "%s() Failed to create debug kernel thread\n",
drivers/media/pci/saa7164/saa7164-core.c
1440
printk(KERN_ERR "%s() Unsupported board detected, registering without firmware\n",
drivers/media/pci/saa7164/saa7164-core.c
153
printk(KERN_ERR "video pid cc, %d errors\n", port->v_cc_errors);
drivers/media/pci/saa7164/saa7164-core.c
156
printk(KERN_ERR "audio pid cc, %d errors\n", port->a_cc_errors);
drivers/media/pci/saa7164/saa7164-core.c
159
printk(KERN_ERR "sync_errors = %d\n", port->sync_errors);
drivers/media/pci/saa7164/saa7164-core.c
230
printk(KERN_ERR "Histogram named %s (ms, count, last_update_jiffy)\n", hg->name);
drivers/media/pci/saa7164/saa7164-core.c
235
printk(KERN_ERR " %4d %12d %Ld\n",
drivers/media/pci/saa7164/saa7164-core.c
242
printk(KERN_ERR "Total: %d\n", entries);
drivers/media/pci/saa7164/saa7164-core.c
259
printk(KERN_ERR "%s() illegal i count %d\n",
drivers/media/pci/saa7164/saa7164-core.c
284
printk(KERN_ERR "%s() buf %p guard buffer breach\n",
drivers/media/pci/saa7164/saa7164-core.c
327
printk(KERN_ERR "buf %p bufsize fails match\n", buf);
drivers/media/pci/saa7164/saa7164-core.c
331
printk(KERN_ERR "encirq no free buffers, increase param encoder_buffers\n");
drivers/media/pci/saa7164/saa7164-core.c
384
printk(KERN_ERR "%s() illegal buf count %d\n", __func__, wp);
drivers/media/pci/saa7164/saa7164-core.c
402
printk(KERN_ERR "%s() illegal rp count %d\n", __func__, rp);
drivers/media/pci/saa7164/saa7164-core.c
459
printk(KERN_ERR "%s() illegal buf count %d\n", __func__, wp);
drivers/media/pci/saa7164/saa7164-core.c
477
printk(KERN_ERR "%s() illegal rp count %d\n", __func__, rp);
drivers/media/pci/saa7164/saa7164-core.c
614
printk(KERN_ERR "%s() No device specified\n", __func__);
drivers/media/pci/saa7164/saa7164-core.c
852
printk(KERN_ERR "Structure struct tmComResHWDescr is mangled\n");
drivers/media/pci/saa7164/saa7164-core.c
853
printk(KERN_ERR "Need %x got %d\n", dev->hwdesc.bLength,
drivers/media/pci/saa7164/saa7164-core.c
859
printk(KERN_ERR "struct struct tmComResInterfaceDescr is mangled\n");
drivers/media/pci/saa7164/saa7164-core.c
860
printk(KERN_ERR "Need %x got %d\n", dev->intfdesc.bLength,
drivers/media/pci/saa7164/saa7164-core.c
883
printk(KERN_ERR "%s: can't get MMIO memory @ 0x%llx or 0x%llx\n",
drivers/media/pci/saa7164/saa7164-core.c
93
printk(KERN_ERR "No pack at 0x%x\n", i);
drivers/media/pci/saa7164/saa7164-core.c
999
printk(KERN_ERR "CORE %s No more PCIe resources for subsystem: %04x:%04x\n",
drivers/media/pci/saa7164/saa7164-dvb.c
140
printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-dvb.c
158
printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-dvb.c
176
printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-dvb.c
227
printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n",
drivers/media/pci/saa7164/saa7164-dvb.c
233
printk(KERN_ERR "%s() acquire/forced stop transition failed, res = 0x%x\n",
drivers/media/pci/saa7164/saa7164-dvb.c
244
printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n",
drivers/media/pci/saa7164/saa7164-dvb.c
250
printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n",
drivers/media/pci/saa7164/saa7164-dvb.c
262
printk(KERN_ERR "%s() run transition failed, result = 0x%x\n",
drivers/media/pci/saa7164/saa7164-dvb.c
268
printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n",
drivers/media/pci/saa7164/saa7164-dvb.c
345
printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d), NO PCI configuration\n",
drivers/media/pci/saa7164/saa7164-dvb.c
373
printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d), unable to allocate buffers\n",
drivers/media/pci/saa7164/saa7164-dvb.c
387
printk(KERN_ERR "%s: dvb_register_adapter failed (errno = %d)\n",
drivers/media/pci/saa7164/saa7164-dvb.c
396
printk(KERN_ERR "%s: dvb_register_frontend failed (errno = %d)\n",
drivers/media/pci/saa7164/saa7164-dvb.c
412
printk(KERN_ERR "%s: dvb_dmx_init failed (errno = %d)\n",
drivers/media/pci/saa7164/saa7164-dvb.c
422
printk(KERN_ERR "%s: dvb_dmxdev_init failed (errno = %d)\n",
drivers/media/pci/saa7164/saa7164-dvb.c
430
printk(KERN_ERR "%s: add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
drivers/media/pci/saa7164/saa7164-dvb.c
438
printk(KERN_ERR "%s: add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
drivers/media/pci/saa7164/saa7164-dvb.c
445
printk(KERN_ERR "%s: connect_frontend failed (errno = %d)\n",
drivers/media/pci/saa7164/saa7164-dvb.c
717
printk(KERN_ERR "%s: The frontend isn't supported\n",
drivers/media/pci/saa7164/saa7164-dvb.c
722
printk(KERN_ERR "%s() Frontend initialization failed\n",
drivers/media/pci/saa7164/saa7164-dvb.c
738
printk(KERN_ERR "%s() Frontend/I2C initialization failed\n", __func__);
drivers/media/pci/saa7164/saa7164-encoder.c
1005
printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n",
drivers/media/pci/saa7164/saa7164-encoder.c
1077
printk(KERN_INFO "%s: can't allocate mpeg device\n",
drivers/media/pci/saa7164/saa7164-encoder.c
1089
printk(KERN_INFO "%s: can't register mpeg device\n",
drivers/media/pci/saa7164/saa7164-encoder.c
1094
printk(KERN_INFO "%s: registered device video%d [mpeg]\n",
drivers/media/pci/saa7164/saa7164-encoder.c
146
printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n",
drivers/media/pci/saa7164/saa7164-encoder.c
393
printk(KERN_ERR "%s() No analog tuner, aborting\n", __func__);
drivers/media/pci/saa7164/saa7164-encoder.c
450
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__,
drivers/media/pci/saa7164/saa7164-encoder.c
459
printk(KERN_ERR "%s() error, ret = 0x%x\n", __func__,
drivers/media/pci/saa7164/saa7164-encoder.c
533
printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-encoder.c
551
printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-encoder.c
569
printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-encoder.c
654
printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n",
drivers/media/pci/saa7164/saa7164-encoder.c
660
printk(KERN_ERR "%s() acquire/forced stop transition failed, res = 0x%x\n",
drivers/media/pci/saa7164/saa7164-encoder.c
671
printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n",
drivers/media/pci/saa7164/saa7164-encoder.c
677
printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n",
drivers/media/pci/saa7164/saa7164-encoder.c
689
printk(KERN_ERR "%s() run transition failed, result = 0x%x\n",
drivers/media/pci/saa7164/saa7164-encoder.c
695
printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n",
drivers/media/pci/saa7164/saa7164-encoder.c
771
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-encoder.c
806
printk(KERN_ERR "%s() ESPIPE\n", __func__);
drivers/media/pci/saa7164/saa7164-encoder.c
814
printk(KERN_ERR "%s() EINVAL\n", __func__);
drivers/media/pci/saa7164/saa7164-encoder.c
827
printk(KERN_ERR "%s() ERESTARTSYS\n", __func__);
drivers/media/pci/saa7164/saa7164-encoder.c
848
printk(KERN_ERR "%s() copy_to_user failed\n", __func__);
drivers/media/pci/saa7164/saa7164-encoder.c
850
printk(KERN_ERR "%s() EFAULT\n", __func__);
drivers/media/pci/saa7164/saa7164-encoder.c
862
printk(KERN_ERR "read() pos > actual, huh?\n");
drivers/media/pci/saa7164/saa7164-fw.c
155
printk(KERN_ERR "%s() image corrupt\n", __func__);
drivers/media/pci/saa7164/saa7164-fw.c
161
printk(KERN_ERR "%s() device memory corrupt\n",
drivers/media/pci/saa7164/saa7164-fw.c
172
printk(KERN_INFO "%s() Image downloaded, booting...\n", __func__);
drivers/media/pci/saa7164/saa7164-fw.c
178
printk(KERN_INFO "%s() Image booted successfully.\n", __func__);
drivers/media/pci/saa7164/saa7164-fw.c
227
printk(KERN_ERR "%s() firmware corrupt\n",
drivers/media/pci/saa7164/saa7164-fw.c
232
printk(KERN_ERR "%s() device memory corrupt\n",
drivers/media/pci/saa7164/saa7164-fw.c
237
printk(KERN_ERR "%s() no first image\n",
drivers/media/pci/saa7164/saa7164-fw.c
244
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-fw.c
252
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-fw.c
260
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-fw.c
285
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-fw.c
291
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-fw.c
297
printk(KERN_ERR "%s() no second image\n",
drivers/media/pci/saa7164/saa7164-fw.c
304
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-fw.c
313
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-fw.c
32
printk(KERN_ERR "%s() timeout (no d/l ack)\n",
drivers/media/pci/saa7164/saa7164-fw.c
321
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-fw.c
365
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-fw.c
382
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-fw.c
404
printk(KERN_INFO "%s() Waiting for firmware upload (%s)\n",
drivers/media/pci/saa7164/saa7164-fw.c
409
printk(KERN_ERR "%s() Upload failed. (file not found?)\n",
drivers/media/pci/saa7164/saa7164-fw.c
414
printk(KERN_INFO "%s() firmware read %zu bytes.\n",
drivers/media/pci/saa7164/saa7164-fw.c
418
printk(KERN_ERR "saa7164: firmware incorrect size %zu != %u\n",
drivers/media/pci/saa7164/saa7164-fw.c
424
printk(KERN_INFO "%s() firmware loaded.\n", __func__);
drivers/media/pci/saa7164/saa7164-fw.c
427
printk(KERN_INFO "Firmware file header part 1:\n");
drivers/media/pci/saa7164/saa7164-fw.c
428
printk(KERN_INFO " .FirmwareSize = 0x%x\n", hdr->firmwaresize);
drivers/media/pci/saa7164/saa7164-fw.c
429
printk(KERN_INFO " .BSLSize = 0x%x\n", hdr->bslsize);
drivers/media/pci/saa7164/saa7164-fw.c
430
printk(KERN_INFO " .Reserved = 0x%x\n", hdr->reserved);
drivers/media/pci/saa7164/saa7164-fw.c
431
printk(KERN_INFO " .Version = 0x%x\n", hdr->version);
drivers/media/pci/saa7164/saa7164-fw.c
441
printk(KERN_INFO "%s() SecBootLoader.FileSize = %d\n",
drivers/media/pci/saa7164/saa7164-fw.c
48
printk(KERN_ERR "%s() timeout (no d/l clr)\n",
drivers/media/pci/saa7164/saa7164-fw.c
519
printk(KERN_INFO "%s() FirmwareSize = 0x%x\n",
drivers/media/pci/saa7164/saa7164-fw.c
521
printk(KERN_INFO "%s() BSLSize = 0x%x\n",
drivers/media/pci/saa7164/saa7164-fw.c
523
printk(KERN_INFO "%s() Reserved = 0x%x\n",
drivers/media/pci/saa7164/saa7164-fw.c
525
printk(KERN_INFO "%s() Version = 0x%x\n",
drivers/media/pci/saa7164/saa7164-fw.c
535
printk(KERN_ERR
drivers/media/pci/saa7164/saa7164-fw.c
544
printk(KERN_ERR "starting firmware download(2)\n");
drivers/media/pci/saa7164/saa7164-fw.c
566
printk(KERN_ERR "firmware download failed\n");
drivers/media/pci/saa7164/saa7164-fw.c
569
printk(KERN_ERR "firmware download complete.\n");
drivers/media/pci/saa7164/saa7164-fw.c
574
printk(KERN_ERR "starting firmware download(3)\n");
drivers/media/pci/saa7164/saa7164-fw.c
584
printk(KERN_ERR "firmware download failed\n");
drivers/media/pci/saa7164/saa7164-fw.c
587
printk(KERN_ERR "firmware download complete.\n");
drivers/media/pci/saa7164/saa7164-i2c.c
102
printk(KERN_ERR "%s: i2c bus %d register FAILED\n",
drivers/media/pci/saa7164/saa7164-vbi.c
215
printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-vbi.c
233
printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-vbi.c
251
printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n",
drivers/media/pci/saa7164/saa7164-vbi.c
337
printk(KERN_ERR "%s() No supported VBI format\n", __func__);
drivers/media/pci/saa7164/saa7164-vbi.c
345
printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n",
drivers/media/pci/saa7164/saa7164-vbi.c
356
printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n",
drivers/media/pci/saa7164/saa7164-vbi.c
362
printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n",
drivers/media/pci/saa7164/saa7164-vbi.c
374
printk(KERN_ERR "%s() run transition failed, result = 0x%x\n",
drivers/media/pci/saa7164/saa7164-vbi.c
381
printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n",
drivers/media/pci/saa7164/saa7164-vbi.c
474
printk(KERN_ERR "%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n",
drivers/media/pci/saa7164/saa7164-vbi.c
508
printk(KERN_ERR "%s() ESPIPE\n", __func__);
drivers/media/pci/saa7164/saa7164-vbi.c
516
printk(KERN_ERR "%s() EINVAL\n", __func__);
drivers/media/pci/saa7164/saa7164-vbi.c
529
printk(KERN_ERR "%s() ERESTARTSYS\n", __func__);
drivers/media/pci/saa7164/saa7164-vbi.c
550
printk(KERN_ERR "%s() copy_to_user failed\n", __func__);
drivers/media/pci/saa7164/saa7164-vbi.c
552
printk(KERN_ERR "%s() EFAULT\n", __func__);
drivers/media/pci/saa7164/saa7164-vbi.c
564
printk(KERN_ERR "read() pos > actual, huh?\n");
drivers/media/pci/saa7164/saa7164-vbi.c
589
printk(KERN_ERR "%s() EAGAIN\n", __func__);
drivers/media/pci/saa7164/saa7164-vbi.c
706
printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n",
drivers/media/pci/saa7164/saa7164-vbi.c
719
printk(KERN_INFO "%s: can't allocate vbi device\n",
drivers/media/pci/saa7164/saa7164-vbi.c
730
printk(KERN_INFO "%s: can't register vbi device\n",
drivers/media/pci/saa7164/saa7164-vbi.c
738
printk(KERN_INFO "%s: registered device vbi%d [vbi]\n",
drivers/media/pci/saa7164/saa7164-vbi.c
97
printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n",
drivers/media/pci/saa7164/saa7164.h
616
printk(KERN_DEBUG "%s: " fmt, dev->name, ## arg);\
drivers/media/pci/saa7164/saa7164.h
621
printk(KERN_WARNING "%s: " fmt, dev->name, ## arg);\
drivers/media/platform/marvell/cafe-driver.c
340
printk(KERN_ERR "Unable to register cafe i2c adapter\n");
drivers/media/platform/marvell/cafe-driver.c
517
printk(KERN_ERR "Unable to ioremap cafe-ccic regs\n");
drivers/media/platform/marvell/cafe-driver.c
608
printk(KERN_WARNING "pci_remove on unknown pdev %p\n", pdev);
drivers/media/platform/marvell/cafe-driver.c
662
printk(KERN_NOTICE "Marvell M88ALP01 'CAFE' Camera Controller version %d\n",
drivers/media/platform/marvell/cafe-driver.c
666
printk(KERN_ERR "Unable to register cafe_ccic driver\n");
drivers/media/platform/marvell/mcam-core.c
1856
printk(KERN_ERR "marvell-cam: Cafe can't do S/G I/O, attempting vmalloc mode instead\n");
drivers/media/platform/marvell/mcam-core.c
1861
printk(KERN_ERR "marvell-cam: buffer mode %d unsupported\n",
drivers/media/platform/renesas/vsp1/vsp1_pipe.c
441
printk(KERN_DEBUG "%s: %s: pipe: ", dev_name(vsp1->dev), msg);
drivers/media/platform/samsung/s5p-mfc/s5p_mfc_debug.h
23
printk(KERN_DEBUG "%s:%d: " fmt, \
drivers/media/platform/samsung/s5p-mfc/s5p_mfc_debug.h
35
printk(KERN_ERR "%s:%d: " fmt, \
drivers/media/platform/samsung/s5p-mfc/s5p_mfc_debug.h
47
printk(KERN_INFO "%s:%d: " fmt, \
drivers/media/platform/ti/omap/omap_vout.c
1375
printk(KERN_ERR VOUT_NAME
drivers/media/platform/ti/omap/omap_vout.c
1728
printk(KERN_ERR VOUT_NAME ":Could not register Video driver\n");
drivers/media/platform/ti/omap/omap_vout.c
553
printk(KERN_ERR VOUT_NAME
drivers/media/platform/ti/omap/omap_vout.c
561
printk(KERN_ERR VOUT_NAME "failed to change mode\n");
drivers/media/platform/ti/omap3isp/isp.c
522
printk(KERN_CONT "%s ", name[i]);
drivers/media/platform/ti/omap3isp/isp.c
524
printk(KERN_CONT "\n");
drivers/media/platform/via/via-camera.c
1107
printk(KERN_NOTICE "Via camera: serial port is enabled, " \
drivers/media/platform/via/via-camera.c
1109
printk(KERN_NOTICE "Specify override_serial=1 to force " \
drivers/media/platform/via/via-camera.c
1113
printk(KERN_NOTICE "Via camera: overriding serial port\n");
drivers/media/platform/via/via-camera.c
1153
printk(KERN_ERR "viacam: insufficient FB memory reserved\n");
drivers/media/platform/via/via-camera.c
1157
printk(KERN_ERR "viacam: No I/O memory, so no pictures\n");
drivers/media/radio/radio-cadet.c
549
printk(KERN_INFO "radio-cadet: PnP reports device at %#x\n", io);
drivers/media/radio/radio-isa.c
329
printk(KERN_CONT "/0x%03x", drv->io_ports[i]);
drivers/media/radio/radio-isa.c
330
printk(KERN_CONT ".\n");
drivers/media/radio/radio-maxiradio.c
161
printk(KERN_ERR "radio-maxiradio: Unable to detect TEA575x tuner\n");
drivers/media/radio/radio-sf16fmi.c
257
printk(KERN_ERR "radio-sf16fmi: PnP configure failed (out of resources?)\n");
drivers/media/radio/radio-sf16fmi.c
267
printk(KERN_INFO "radio-sf16fmi: PnP reports card at %#x\n", i);
drivers/media/radio/radio-sf16fmi.c
303
printk(KERN_ERR "radio-sf16fmi: port %#x already in use\n", io);
drivers/media/radio/radio-sf16fmi.c
307
printk(KERN_ERR "radio-sf16fmi: card not present at %#x\n", io);
drivers/media/radio/radio-sf16fmi.c
313
printk(KERN_ERR "radio-sf16fmi: no cards found\n");
drivers/media/radio/radio-sf16fmr2.c
193
printk(KERN_ERR "radio-sf16fmr2: can't initialize controls\n");
drivers/media/radio/radio-sf16fmr2.c
222
printk(KERN_ERR "radio-sf16fmr2: I/O port 0x%x already in use\n", fmr2->io);
drivers/media/radio/radio-sf16fmr2.c
243
printk(KERN_ERR "radio-sf16fmr2: Unable to detect TEA575x tuner\n");
drivers/media/radio/radio-sf16fmr2.c
248
printk(KERN_INFO "radio-sf16fmr2: %s radio card at 0x%x.\n",
drivers/media/radio/radio-tea5764.c
39
printk(KERN_INFO KBUILD_MODNAME ": "\
drivers/media/radio/radio-tea5764.c
42
printk(KERN_WARNING KBUILD_MODNAME ": "\
drivers/media/radio/radio-tea5764.c
45
printk(KERN_DEBUG KBUILD_MODNAME ": "\
drivers/media/radio/radio-typhoon.c
164
printk(KERN_ERR "%s: You must set a frequency (in kHz) used when muting the card,\n",
drivers/media/radio/radio-typhoon.c
166
printk(KERN_ERR "%s: e.g. with \"mutefreq=87500\" (87000 <= mutefreq <= 108000)\n",
drivers/media/radio/saa7706h.c
381
printk(KERN_ERR DRIVER_NAME ": Failed to probe: %d\n", err);
drivers/media/rc/fintek-cir.h
25
printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__)
drivers/media/rc/fintek-cir.h
29
printk(KERN_DEBUG \
drivers/media/rc/fintek-cir.h
34
printk(KERN_DEBUG \
drivers/media/rc/fintek-cir.h
39
printk(KERN_DEBUG \
drivers/media/rc/imon.c
1660
printk(KERN_INFO "intf%d decoded packet: %*ph\n",
drivers/media/rc/imon.c
1921
printk(KERN_CONT " (id 0x%02x)\n", ffdc_cfg_byte);
drivers/media/rc/ir-jvc-decoder.c
215
printk(KERN_INFO "IR JVC protocol handler initialized\n");
drivers/media/rc/ir-mce_kbd-decoder.c
438
printk(KERN_INFO "IR MCE Keyboard/mouse protocol handler initialized\n");
drivers/media/rc/ir-nec-decoder.c
263
printk(KERN_INFO "IR NEC protocol handler initialized\n");
drivers/media/rc/ir-rc5-decoder.c
281
printk(KERN_INFO "IR RC5(x/sz) protocol handler initialized\n");
drivers/media/rc/ir-rc6-decoder.c
393
printk(KERN_INFO "IR RC6 protocol handler initialized\n");
drivers/media/rc/ir-sanyo-decoder.c
220
printk(KERN_INFO "IR SANYO protocol handler initialized\n");
drivers/media/rc/ir-sony-decoder.c
226
printk(KERN_INFO "IR Sony protocol handler initialized\n");
drivers/media/rc/ir-xmp-decoder.c
202
printk(KERN_INFO "IR XMP protocol handler initialized\n");
drivers/media/rc/nuvoton-cir.c
688
printk(KERN_DEBUG "%s (len %d): ", __func__, nvt->pkts);
drivers/media/rc/nuvoton-cir.c
690
printk(KERN_CONT "0x%02x ", nvt->buf[i]);
drivers/media/rc/nuvoton-cir.c
691
printk(KERN_CONT "\n");
drivers/media/rc/nuvoton-cir.h
26
printk(KERN_DEBUG \
drivers/media/rc/nuvoton-cir.h
31
printk(KERN_DEBUG \
drivers/media/rc/nuvoton-cir.h
36
printk(KERN_DEBUG \
drivers/media/rc/rc-main.c
129
printk(KERN_INFO "Registered IR keymap %s\n", map->map.name);
drivers/media/tuners/fc0013-priv.h
14
#define err(f, arg...) printk(KERN_ERR LOG_PREFIX": " f "\n" , ## arg)
drivers/media/tuners/fc0013-priv.h
16
#define info(f, arg...) printk(KERN_INFO LOG_PREFIX": " f "\n" , ## arg)
drivers/media/tuners/fc0013-priv.h
18
#define warn(f, arg...) printk(KERN_WARNING LOG_PREFIX": " f "\n" , ## arg)
drivers/media/tuners/fc0013.h
25
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/max2165.c
25
printk(KERN_DEBUG "max2165: " args); \
drivers/media/tuners/max2165.c
261
printk(KERN_INFO "MAX2165: bandwidth %d Hz not supported.\n",
drivers/media/tuners/max2165.h
28
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/mc44s803.c
20
printk(level "mc44s803: " format , ## arg)
drivers/media/tuners/mc44s803.h
26
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/mt2060.c
106
printk(KERN_WARNING "mt2060 I2C write failed (len=%i)\n", val_len);
drivers/media/tuners/mt2060.c
25
#define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "MT2060: " args); printk("\n"); }} while (0)
drivers/media/tuners/mt2060.c
431
printk(KERN_INFO "MT2060: successfully identified (IF1 = %d)\n", if1);
drivers/media/tuners/mt2060.c
48
printk(KERN_WARNING "mt2060 I2C read failed\n");
drivers/media/tuners/mt2060.c
76
printk(KERN_WARNING "mt2060 I2C write failed\n");
drivers/media/tuners/mt2060.h
47
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/mt2063.c
1792
printk(KERN_ERR "Can't read mt2063 part ID\n");
drivers/media/tuners/mt2063.c
1811
printk(KERN_ERR "mt2063: Unknown mt2063 device ID (0x%02x)\n",
drivers/media/tuners/mt2063.c
1822
printk(KERN_ERR "mt2063: Unknown part ID (0x%02x%02x)\n",
drivers/media/tuners/mt2063.c
1828
printk(KERN_INFO "mt2063: detected a mt2063 %s\n", step);
drivers/media/tuners/mt2063.c
2226
printk(KERN_INFO "%s: Attaching MT2063\n", __func__);
drivers/media/tuners/mt2063.c
2245
printk(KERN_ERR "%s: Couldn't shutdown\n", __func__);
drivers/media/tuners/mt2063.c
2259
printk(KERN_ERR "%s: Invalid parameter\n", __func__);
drivers/media/tuners/mt2063.c
263
printk(KERN_ERR "%s error ret=%d\n", __func__, ret);
drivers/media/tuners/mt2063.c
28
printk(KERN_DEBUG "mt2063 %s: " fmt, __func__, ## arg); \
drivers/media/tuners/mt2063.c
330
printk(KERN_ERR "Can't read from address 0x%02x,\n",
drivers/media/tuners/mt2063.h
23
printk(KERN_WARNING "%s: Driver disabled by Kconfig\n", __func__);
drivers/media/tuners/mt20xx.h
20
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/mt2131.c
24
printk(KERN_INFO "%s: " fmt, "mt2131", ## arg)
drivers/media/tuners/mt2131.c
263
printk(KERN_ERR "MT2131: Device not found at addr 0x%02x\n",
drivers/media/tuners/mt2131.c
269
printk(KERN_INFO "MT2131: successfully identified at address 0x%02x\n",
drivers/media/tuners/mt2131.c
49
printk(KERN_WARNING "mt2131 I2C read failed\n");
drivers/media/tuners/mt2131.c
62
printk(KERN_WARNING "mt2131 I2C write failed\n");
drivers/media/tuners/mt2131.c
74
printk(KERN_WARNING "mt2131 I2C write failed (len=%i)\n",
drivers/media/tuners/mt2131.h
30
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/mt2266.c
332
printk(KERN_INFO "MT2266: successfully identified\n");
drivers/media/tuners/mt2266.c
45
#define dprintk(args...) do { if (debug) {printk(KERN_DEBUG "MT2266: " args); printk("\n"); }} while (0)
drivers/media/tuners/mt2266.c
55
printk(KERN_WARNING "MT2266 I2C read failed\n");
drivers/media/tuners/mt2266.c
69
printk(KERN_WARNING "MT2266 I2C write failed\n");
drivers/media/tuners/mt2266.c
82
printk(KERN_WARNING "MT2266 I2C write failed (len=%i)\n",(int)len);
drivers/media/tuners/mt2266.h
23
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/mxl5005s.c
3860
printk(KERN_WARNING "mxl5005s I2C reset failed\n");
drivers/media/tuners/mxl5005s.c
3886
printk(KERN_WARNING "mxl5005s I2C write failed\n");
drivers/media/tuners/mxl5005s.c
4120
printk(KERN_INFO "MXL5005S: Attached at address 0x%02x\n",
drivers/media/tuners/mxl5005s.c
73
printk(arg); \
drivers/media/tuners/mxl5005s.h
116
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/mxl5007t.c
24
printk(kern "%s: " fmt "\n", __func__, ##arg)
drivers/media/tuners/mxl5007t.c
819
printk(KERN_WARNING "%s: unknown rev (%02x)\n", __func__, id);
drivers/media/tuners/mxl5007t.h
77
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/qt1010.h
35
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/tda18218.h
26
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/tda18271-common.c
717
printk("%s%s: [%d-%04x|%c] %pV",
drivers/media/tuners/tda18271-common.c
723
printk("%s%s: %pV", level, func, &vaf);
drivers/media/tuners/tda18271.h
122
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/tda827x.c
214
printk(KERN_ERR "%s: could not write to tuner at addr: 0x%02x\n",
drivers/media/tuners/tda827x.c
22
if (debug) printk(KERN_DEBUG "tda827x: " args); \
drivers/media/tuners/tda827x.c
642
printk(KERN_ERR "%s: could not write to tuner at addr: 0x%02x\n",
drivers/media/tuners/tda827x.c
850
printk("%s: could not read from tuner at addr: 0x%02x\n",
drivers/media/tuners/tda827x.h
51
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/tda8290.c
669
printk(KERN_WARNING "%s: couldn't read register 0x%02x\n",
drivers/media/tuners/tda8290.c
676
printk(KERN_DEBUG "%s: tda8290 detected @ %d-%04x\n",
drivers/media/tuners/tda8290.c
696
printk(KERN_WARNING "%s: couldn't read register 0x%02x\n",
drivers/media/tuners/tda8290.c
703
printk(KERN_DEBUG "%s: %s detected @ %d-%04x\n",
drivers/media/tuners/tda8290.h
39
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/tda8290.h
48
printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n",
drivers/media/tuners/tda9887.h
21
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/tea5761.c
131
printk(KERN_INFO "tea5761: Frequency %d.%03d KHz (divider = 0x%04x)\n",
drivers/media/tuners/tea5761.c
269
printk(KERN_WARNING "it is not a TEA5761. Received %i chars.\n", rc);
drivers/media/tuners/tea5761.c
274
printk(KERN_WARNING "Manufacturer ID= 0x%02x, Chip ID = %02x%02x. It is not a TEA5761\n",
drivers/media/tuners/tea5761.c
278
printk(KERN_WARNING "tea5761: TEA%02x%02x detected. Manufacturer ID= 0x%02x\n",
drivers/media/tuners/tea5761.h
21
printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n",
drivers/media/tuners/tea5761.h
30
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/tea5767.h
40
printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n",
drivers/media/tuners/tea5767.h
49
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/tuner-i2c.h
76
printk(kernlvl "%s %d-%04x: " fmt, i2cprops.name, \
drivers/media/tuners/tuner-simple.c
1057
printk(KERN_WARNING "%s: invalid tuner type: %d (max: %d)\n",
drivers/media/tuners/tuner-simple.c
1077
printk(KERN_WARNING "tuner-simple %d-%04x: unable to probe %s, proceeding anyway.",
drivers/media/tuners/tuner-simple.h
22
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/xc2028.c
1463
printk(KERN_DEBUG "xc2028: Xcv2028/3028 init called!\n");
drivers/media/tuners/xc2028.c
1469
printk(KERN_ERR "xc2028: No frontend!\n");
drivers/media/tuners/xc2028.c
179
printk(KERN_CONT "BASE ");
drivers/media/tuners/xc2028.c
181
printk(KERN_CONT "INIT1 ");
drivers/media/tuners/xc2028.c
183
printk(KERN_CONT "F8MHZ ");
drivers/media/tuners/xc2028.c
185
printk(KERN_CONT "MTS ");
drivers/media/tuners/xc2028.c
187
printk(KERN_CONT "D2620 ");
drivers/media/tuners/xc2028.c
189
printk(KERN_CONT "D2633 ");
drivers/media/tuners/xc2028.c
191
printk(KERN_CONT "DTV6 ");
drivers/media/tuners/xc2028.c
193
printk(KERN_CONT "QAM ");
drivers/media/tuners/xc2028.c
195
printk(KERN_CONT "DTV7 ");
drivers/media/tuners/xc2028.c
197
printk(KERN_CONT "DTV78 ");
drivers/media/tuners/xc2028.c
199
printk(KERN_CONT "DTV8 ");
drivers/media/tuners/xc2028.c
201
printk(KERN_CONT "FM ");
drivers/media/tuners/xc2028.c
203
printk(KERN_CONT "INPUT1 ");
drivers/media/tuners/xc2028.c
205
printk(KERN_CONT "LCD ");
drivers/media/tuners/xc2028.c
207
printk(KERN_CONT "NOGD ");
drivers/media/tuners/xc2028.c
209
printk(KERN_CONT "MONO ");
drivers/media/tuners/xc2028.c
211
printk(KERN_CONT "ATSC ");
drivers/media/tuners/xc2028.c
213
printk(KERN_CONT "IF ");
drivers/media/tuners/xc2028.c
215
printk(KERN_CONT "LG60 ");
drivers/media/tuners/xc2028.c
217
printk(KERN_CONT "ATI638 ");
drivers/media/tuners/xc2028.c
219
printk(KERN_CONT "OREN538 ");
drivers/media/tuners/xc2028.c
221
printk(KERN_CONT "OREN36 ");
drivers/media/tuners/xc2028.c
223
printk(KERN_CONT "TOYOTA388 ");
drivers/media/tuners/xc2028.c
225
printk(KERN_CONT "TOYOTA794 ");
drivers/media/tuners/xc2028.c
227
printk(KERN_CONT "DIBCOM52 ");
drivers/media/tuners/xc2028.c
229
printk(KERN_CONT "ZARLINK456 ");
drivers/media/tuners/xc2028.c
231
printk(KERN_CONT "CHINA ");
drivers/media/tuners/xc2028.c
233
printk(KERN_CONT "F6MHZ ");
drivers/media/tuners/xc2028.c
235
printk(KERN_CONT "INPUT2 ");
drivers/media/tuners/xc2028.c
237
printk(KERN_CONT "SCODE ");
drivers/media/tuners/xc2028.c
239
printk(KERN_CONT "HAS_IF_%d ", int_freq);
drivers/media/tuners/xc2028.c
378
printk(KERN_CONT
drivers/media/tuners/xc2028.c
393
printk(KERN_CONT "(%x), id %llx, size=%d.\n",
drivers/media/tuners/xc2028.c
441
printk(KERN_CONT "(%x), id %016llx.\n",
drivers/media/tuners/xc2028.c
501
printk(KERN_CONT
drivers/media/tuners/xc2028.c
519
printk(KERN_CONT "(%x), id %016llx.\n",
drivers/media/tuners/xc2028.c
560
printk(KERN_CONT "(%x), id %016llx.\n",
drivers/media/tuners/xc2028.c
694
printk(KERN_CONT "(%x), id %016llx.\n", priv->firm[pos].type,
drivers/media/tuners/xc2028.c
746
printk(KERN_CONT "(%x), id %016llx, ", new_fw.type,
drivers/media/tuners/xc2028.c
749
printk(KERN_CONT "scode_tbl ");
drivers/media/tuners/xc2028.c
751
printk(KERN_CONT "(%x), ", priv->ctrl.scode_table);
drivers/media/tuners/xc2028.c
753
printk(KERN_CONT "int_freq %d, ", new_fw.int_freq);
drivers/media/tuners/xc2028.c
754
printk(KERN_CONT "scode_nr %d\n", new_fw.scode_nr);
drivers/media/tuners/xc2028.h
67
printk(KERN_INFO "%s: not probed - driver disabled by Kconfig\n",
drivers/media/tuners/xc4000.c
1028
printk(KERN_ERR "Unable to read tuner registers.\n");
drivers/media/tuners/xc4000.c
1034
printk(KERN_ERR "Unable to read tuner registers.\n");
drivers/media/tuners/xc4000.c
1043
printk(KERN_WARNING
drivers/media/tuners/xc4000.c
1057
printk(KERN_WARNING
drivers/media/tuners/xc4000.c
1191
printk(KERN_ERR "xc4000 delivery system not supported!\n");
drivers/media/tuners/xc4000.c
1209
printk(KERN_ERR "xc4000: xc_set_signal_source(%d) failed\n",
drivers/media/tuners/xc4000.c
1220
printk(KERN_ERR "xc4000: xc_set_tv_standard failed\n");
drivers/media/tuners/xc4000.c
1240
printk(KERN_ERR "xc4000: setting registers failed\n");
drivers/media/tuners/xc4000.c
1402
printk(KERN_ERR
drivers/media/tuners/xc4000.c
1421
printk(KERN_ERR "xc4000: xc_set_tv_standard failed\n");
drivers/media/tuners/xc4000.c
1435
printk(KERN_ERR "xc4000: setting registers failed\n");
drivers/media/tuners/xc4000.c
1588
printk(KERN_ERR
drivers/media/tuners/xc4000.c
1704
printk(KERN_INFO
drivers/media/tuners/xc4000.c
1707
printk(KERN_INFO
drivers/media/tuners/xc4000.c
1711
printk(KERN_INFO
drivers/media/tuners/xc4000.c
1714
printk(KERN_INFO
drivers/media/tuners/xc4000.c
1718
printk(KERN_ERR
drivers/media/tuners/xc4000.c
247
printk(KERN_ERR "xc4000: I2C write failed (len=%i)\n",
drivers/media/tuners/xc4000.c
250
printk(KERN_ERR "bytes %*ph\n", 4, buf);
drivers/media/tuners/xc4000.c
272
printk(KERN_ERR "xc4000: reset failed\n");
drivers/media/tuners/xc4000.c
276
printk(KERN_ERR "xc4000: no tuner reset callback function, fatal\n");
drivers/media/tuners/xc4000.c
375
printk(KERN_ERR
drivers/media/tuners/xc4000.c
53
printk(KERN_INFO "%s: " fmt, "xc4000", ## arg)
drivers/media/tuners/xc4000.c
541
printk(KERN_ERR "xc4000: I2C read failed\n");
drivers/media/tuners/xc4000.c
553
printk(KERN_CONT "BASE ");
drivers/media/tuners/xc4000.c
555
printk(KERN_CONT "INIT1 ");
drivers/media/tuners/xc4000.c
557
printk(KERN_CONT "F8MHZ ");
drivers/media/tuners/xc4000.c
559
printk(KERN_CONT "MTS ");
drivers/media/tuners/xc4000.c
561
printk(KERN_CONT "D2620 ");
drivers/media/tuners/xc4000.c
563
printk(KERN_CONT "D2633 ");
drivers/media/tuners/xc4000.c
565
printk(KERN_CONT "DTV6 ");
drivers/media/tuners/xc4000.c
567
printk(KERN_CONT "QAM ");
drivers/media/tuners/xc4000.c
569
printk(KERN_CONT "DTV7 ");
drivers/media/tuners/xc4000.c
571
printk(KERN_CONT "DTV78 ");
drivers/media/tuners/xc4000.c
573
printk(KERN_CONT "DTV8 ");
drivers/media/tuners/xc4000.c
575
printk(KERN_CONT "FM ");
drivers/media/tuners/xc4000.c
577
printk(KERN_CONT "INPUT1 ");
drivers/media/tuners/xc4000.c
579
printk(KERN_CONT "LCD ");
drivers/media/tuners/xc4000.c
581
printk(KERN_CONT "NOGD ");
drivers/media/tuners/xc4000.c
583
printk(KERN_CONT "MONO ");
drivers/media/tuners/xc4000.c
585
printk(KERN_CONT "ATSC ");
drivers/media/tuners/xc4000.c
587
printk(KERN_CONT "IF ");
drivers/media/tuners/xc4000.c
589
printk(KERN_CONT "LG60 ");
drivers/media/tuners/xc4000.c
591
printk(KERN_CONT "ATI638 ");
drivers/media/tuners/xc4000.c
593
printk(KERN_CONT "OREN538 ");
drivers/media/tuners/xc4000.c
595
printk(KERN_CONT "OREN36 ");
drivers/media/tuners/xc4000.c
597
printk(KERN_CONT "TOYOTA388 ");
drivers/media/tuners/xc4000.c
599
printk(KERN_CONT "TOYOTA794 ");
drivers/media/tuners/xc4000.c
601
printk(KERN_CONT "DIBCOM52 ");
drivers/media/tuners/xc4000.c
603
printk(KERN_CONT "ZARLINK456 ");
drivers/media/tuners/xc4000.c
605
printk(KERN_CONT "CHINA ");
drivers/media/tuners/xc4000.c
607
printk(KERN_CONT "F6MHZ ");
drivers/media/tuners/xc4000.c
609
printk(KERN_CONT "INPUT2 ");
drivers/media/tuners/xc4000.c
611
printk(KERN_CONT "SCODE ");
drivers/media/tuners/xc4000.c
613
printk(KERN_CONT "HAS_IF_%d ", int_freq);
drivers/media/tuners/xc4000.c
624
printk(KERN_ERR "Error! firmware not loaded\n");
drivers/media/tuners/xc4000.c
661
printk(KERN_WARNING
drivers/media/tuners/xc4000.c
672
printk(KERN_DEBUG "%s firmware for type=",
drivers/media/tuners/xc4000.c
675
printk(KERN_DEBUG "(%x), id %016llx.\n", type, (unsigned long long)*id);
drivers/media/tuners/xc4000.c
734
printk(KERN_ERR "Error: firmware %s not found.\n", fname);
drivers/media/tuners/xc4000.c
736
printk(KERN_ERR "Error %d while requesting firmware %s\n",
drivers/media/tuners/xc4000.c
747
printk(KERN_ERR "Error: firmware file %s has invalid size!\n",
drivers/media/tuners/xc4000.c
768
printk(KERN_ERR "Not enough memory to load firmware file.\n");
drivers/media/tuners/xc4000.c
782
printk(KERN_ERR "More firmware images in file than were expected!\n");
drivers/media/tuners/xc4000.c
807
printk(KERN_ERR "Firmware type (%x), id %llx is corrupted (size=%zd, expected %d)\n",
drivers/media/tuners/xc4000.c
815
printk(KERN_ERR "Not enough memory to load firmware file.\n");
drivers/media/tuners/xc4000.c
821
printk(KERN_DEBUG "Reading firmware type ");
drivers/media/tuners/xc4000.c
823
printk(KERN_DEBUG "(%x), id %llx, size=%d.\n",
drivers/media/tuners/xc4000.c
836
printk(KERN_ERR "Firmware file is incomplete!\n");
drivers/media/tuners/xc4000.c
843
printk(KERN_ERR "Firmware header is incomplete!\n");
drivers/media/tuners/xc4000.c
846
printk(KERN_ERR "Error: firmware file is corrupted!\n");
drivers/media/tuners/xc4000.c
891
printk(KERN_CONT "(%x), id %016llx.\n", priv->firm[pos].type,
drivers/media/tuners/xc4000.c
901
printk(KERN_ERR "failed to put device into direct mode!\n");
drivers/media/tuners/xc4000.c
909
printk(KERN_ERR "Failed to set scode %d\n", rc);
drivers/media/tuners/xc4000.c
950
printk(KERN_CONT "(%x), id %016llx, ", new_fw.type,
drivers/media/tuners/xc4000.c
953
printk(KERN_CONT "scode_tbl ");
drivers/media/tuners/xc4000.c
955
printk(KERN_CONT "int_freq %d, ", new_fw.int_freq);
drivers/media/tuners/xc4000.c
956
printk(KERN_CONT "scode_nr %d\n", new_fw.scode_nr);
drivers/media/tuners/xc4000.c
977
printk(KERN_ERR "Error %d while loading base firmware\n", rc);
drivers/media/tuners/xc4000.h
48
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/tuners/xc5000.c
1130
printk(KERN_CONT " - retrying to upload firmware.\n");
drivers/media/tuners/xc5000.c
1140
printk(KERN_ERR
drivers/media/tuners/xc5000.c
1146
printk(KERN_ERR
drivers/media/tuners/xc5000.c
1156
printk(KERN_ERR "xc5000: Can't request self-calibration.");
drivers/media/tuners/xc5000.c
1169
printk(KERN_ERR
drivers/media/tuners/xc5000.c
1175
printk(KERN_ERR
drivers/media/tuners/xc5000.c
1189
printk(KERN_ERR
drivers/media/tuners/xc5000.c
1199
printk(KERN_ERR "xc5000: can't set to cable mode.");
drivers/media/tuners/xc5000.c
1205
printk(KERN_INFO "xc5000: Firmware %s loaded and running.\n",
drivers/media/tuners/xc5000.c
1208
printk(KERN_CONT " - too many retries. Giving up\n");
drivers/media/tuners/xc5000.c
1227
printk(KERN_ERR
drivers/media/tuners/xc5000.c
1259
printk(KERN_ERR
drivers/media/tuners/xc5000.c
1286
printk(KERN_ERR "xc5000: Unable to initialise tuner\n");
drivers/media/tuners/xc5000.c
1436
printk(KERN_INFO
drivers/media/tuners/xc5000.c
1439
printk(KERN_INFO
drivers/media/tuners/xc5000.c
1443
printk(KERN_INFO
drivers/media/tuners/xc5000.c
1446
printk(KERN_INFO
drivers/media/tuners/xc5000.c
1450
printk(KERN_ERR
drivers/media/tuners/xc5000.c
250
printk(KERN_ERR "xc5000: I2C write failed (len=%i)\n", len);
drivers/media/tuners/xc5000.c
266
printk(KERN_ERR "xc5000 I2C read failed (len=%i)\n", len);
drivers/media/tuners/xc5000.c
285
printk(KERN_WARNING "xc5000: I2C read failed\n");
drivers/media/tuners/xc5000.c
307
printk(KERN_ERR "xc5000: reset failed\n");
drivers/media/tuners/xc5000.c
311
printk(KERN_ERR "xc5000: no tuner reset callback function, fatal\n");
drivers/media/tuners/xc5000.c
37
printk(KERN_INFO "%s: " fmt, "xc5000", ## arg)
drivers/media/tuners/xc5000.c
438
printk(KERN_ERR
drivers/media/tuners/xc5000.c
618
printk(KERN_ERR "xc5000: firmware upload failed...\n");
drivers/media/tuners/xc5000.c
691
printk(KERN_ERR
drivers/media/tuners/xc5000.c
701
printk(KERN_ERR "xc5000: xc_set_tv_standard failed\n");
drivers/media/tuners/xc5000.c
707
printk(KERN_ERR "xc5000: xc_Set_IF_frequency(%d) failed\n",
drivers/media/tuners/xc5000.c
778
printk(KERN_ERR "xc5000 bandwidth not set!\n");
drivers/media/tuners/xc5000.c
804
printk(KERN_ERR "xc5000: delivery system is not supported!\n");
drivers/media/tuners/xc5000.c
906
printk(KERN_ERR
drivers/media/tuners/xc5000.c
916
printk(KERN_ERR "xc5000: xc_set_tv_standard failed\n");
drivers/media/tuners/xc5000.c
938
printk(KERN_ERR "xc5000: Unable to reload fw\n");
drivers/media/tuners/xc5000.c
990
printk(KERN_ERR "xc5000: xc_set_tv_standard failed\n");
drivers/media/tuners/xc5000.c
996
printk(KERN_ERR
drivers/media/tuners/xc5000.h
55
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/usb/au0828/au0828.h
359
printk(KERN_DEBUG pr_fmt(fmt), ## arg);\
drivers/media/usb/b2c2/flexcop-usb.c
19
do { if ((debug & (level))) printk(args); } while (0)
drivers/media/usb/cx231xx/cx231xx-417.c
79
printk(KERN_DEBUG pr_fmt(fmt), ## arg); \
drivers/media/usb/cx231xx/cx231xx-core.c
228
printk(KERN_DEBUG "%s: (pipe 0x%08x): %s: %02x %02x %02x %02x %02x %02x %02x %02x ",
drivers/media/usb/cx231xx/cx231xx-core.c
238
printk(KERN_CONT ">>>");
drivers/media/usb/cx231xx/cx231xx-core.c
240
printk(KERN_CONT " %02x",
drivers/media/usb/cx231xx/cx231xx-core.c
257
printk(KERN_CONT "FAILED!\n");
drivers/media/usb/cx231xx/cx231xx-core.c
262
printk(KERN_CONT "<<<");
drivers/media/usb/cx231xx/cx231xx-core.c
264
printk(KERN_CONT " %02x",
drivers/media/usb/cx231xx/cx231xx-core.c
267
printk(KERN_CONT "\n");
drivers/media/usb/cx231xx/cx231xx-core.c
30
printk(KERN_INFO "%s %s :"fmt, \
drivers/media/usb/cx231xx/cx231xx-core.c
43
printk(KERN_INFO "%s %s :"fmt, \
drivers/media/usb/cx231xx/cx231xx-i2c.c
33
printk(fmt, ##args); \
drivers/media/usb/cx231xx/cx231xx-i2c.c
389
printk(KERN_CONT " %02x", msgs[i].buf[byte]);
drivers/media/usb/cx231xx/cx231xx-i2c.c
397
printk(KERN_CONT " %02x", msgs[i].buf[byte]);
drivers/media/usb/cx231xx/cx231xx-i2c.c
398
printk(KERN_CONT "\n");
drivers/media/usb/cx231xx/cx231xx-i2c.c
40
printk(KERN_DEBUG "%s at %s: " fmt, \
drivers/media/usb/cx231xx/cx231xx-i2c.c
409
printk(KERN_CONT " %02x", msgs[i+1].buf[byte]);
drivers/media/usb/cx231xx/cx231xx-i2c.c
416
printk(KERN_CONT " %02x", msgs[i].buf[byte]);
drivers/media/usb/cx231xx/cx231xx-i2c.c
423
printk(KERN_CONT "\n");
drivers/media/usb/cx231xx/cx231xx-video.c
41
printk(KERN_INFO "%s %s :"fmt, \
drivers/media/usb/cx231xx/cx231xx-video.c
51
printk(KERN_INFO "%s %s :"fmt, \
drivers/media/usb/dvb-usb-v2/az6007.c
116
printk(KERN_DEBUG "az6007: IN req: %02x, value: %04x, index: %04x\n",
drivers/media/usb/dvb-usb-v2/az6007.c
147
printk(KERN_DEBUG "az6007: OUT req: %02x, value: %04x, index: %04x\n",
drivers/media/usb/dvb-usb-v2/az6007.c
771
printk(KERN_DEBUG "az6007: I2C W/R addr=0x%x len=%d/%d\n",
drivers/media/usb/dvb-usb-v2/az6007.c
789
printk(KERN_DEBUG "az6007: I2C W addr=0x%x len=%d\n",
drivers/media/usb/dvb-usb-v2/az6007.c
807
printk(KERN_DEBUG "az6007: I2C R addr=0x%x len=%d\n",
drivers/media/usb/dvb-usb-v2/mxl111sf-demod.h
30
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/usb/dvb-usb-v2/mxl111sf-tuner.h
60
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
drivers/media/usb/dvb-usb-v2/mxl111sf.c
955
printk(KERN_WARNING "%s: warning: unknown hauppauge model #%d\n",
drivers/media/usb/dvb-usb-v2/mxl111sf.h
124
printk(kern "%s: " fmt "\n", __func__, ##arg)
drivers/media/usb/dvb-usb/af9005.c
818
printk("EEPROM DUMP\n");
drivers/media/usb/dvb-usb/af9005.c
821
debug_dump(buf, 8, printk);
drivers/media/usb/dvb-usb/dib0700_devices.c
3661
printk(KERN_ERR "Could not reach tuner i2c bus\n");
drivers/media/usb/dvb-usb/dvb-usb.h
32
do { if (((var) & (level))) { printk(args); } } while (0)
drivers/media/usb/dvb-usb/dvb-usb.h
55
#define err(format, arg...) printk(KERN_ERR DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
drivers/media/usb/dvb-usb/dvb-usb.h
57
#define info(format, arg...) printk(KERN_INFO DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
drivers/media/usb/dvb-usb/dvb-usb.h
59
#define warn(format, arg...) printk(KERN_WARNING DVB_USB_LOG_PREFIX ": " format "\n" , ## arg)
drivers/media/usb/dvb-usb/m920x.c
101
printk(KERN_INFO "m920x: Unexpected adapter endpoint!\n");
drivers/media/usb/dvb-usb/m920x.c
40
printk(KERN_INFO "m920x_read = error: %d\n", ret);
drivers/media/usb/dvb-usb/pctv452e.c
69
printk(KERN_DEBUG DVB_USB_LOG_PREFIX \
drivers/media/usb/dvb-usb/ttusb2.c
50
printk(KERN_DEBUG DVB_USB_LOG_PREFIX \
drivers/media/usb/dvb-usb/ttusb2.c
587
printk(KERN_ERR "%s: No tda827x found!\n", __func__);
drivers/media/usb/pwc/pwc.h
73
printk(KERN_DEBUG PFX fmt, ##args); \
drivers/media/usb/pwc/pwc.h
76
#define PWC_ERROR(fmt, args...) printk(KERN_ERR PFX fmt, ##args)
drivers/media/usb/pwc/pwc.h
77
#define PWC_WARNING(fmt, args...) printk(KERN_WARNING PFX fmt, ##args)
drivers/media/usb/pwc/pwc.h
78
#define PWC_INFO(fmt, args...) printk(KERN_INFO PFX fmt, ##args)
drivers/media/usb/pwc/pwc.h
83
#define PWC_ERROR(fmt, args...) printk(KERN_ERR PFX fmt, ##args)
drivers/media/usb/pwc/pwc.h
84
#define PWC_WARNING(fmt, args...) printk(KERN_WARNING PFX fmt, ##args)
drivers/media/usb/pwc/pwc.h
85
#define PWC_INFO(fmt, args...) printk(KERN_INFO PFX fmt, ##args)
drivers/media/usb/siano/smsusb.c
591
printk(KERN_INFO "%s Entering status %d.\n", __func__, msg.event);
drivers/media/usb/siano/smsusb.c
604
printk(KERN_INFO "%s Entering.\n", __func__);
drivers/media/usb/siano/smsusb.c
609
printk(KERN_INFO "endpoint %d %02x %02x %d\n", i,
drivers/media/usb/siano/smsusb.c
619
printk(KERN_INFO "%s usb_set_interface failed, rc %d\n",
drivers/media/usb/stk1160/stk1160-i2c.c
27
printk(KERN_DEBUG fmt, ##args); \
drivers/media/usb/stk1160/stk1160.h
55
printk(KERN_DEBUG "stk1160: " fmt, ## args)
drivers/media/usb/ttusb-budget/dvb-ttusb-budget.c
67
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/usb/ttusb-dec/ttusb_dec.c
1239
printk("%s: usb_submit_urb failed\n",__func__);
drivers/media/usb/ttusb-dec/ttusb_dec.c
1320
printk(KERN_ERR "%s: Firmware (%s) unavailable.\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
1329
printk("%s: firmware size too small for DSP code (%zu < 60).\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
1342
printk("%s: crc32 check of DSP code failed (calculated 0x%08x != 0x%08x in file), file invalid.\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
1349
printk(KERN_INFO "ttusb_dec: found DSP code \"%s\".\n", idstring);
drivers/media/usb/ttusb-dec/ttusb_dec.c
1419
printk(KERN_INFO "ttusb_dec: no version info in Firmware\n");
drivers/media/usb/ttusb-dec/ttusb_dec.c
1421
printk(KERN_INFO "ttusb_dec: Firmware %x.%02x%c%c\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
1445
printk(KERN_ERR "%s: unknown model returned by firmware (%08x) - please report\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
1465
printk("%s: dvb_register_adapter failed: error %d\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
1481
printk("%s: dvb_dmx_init failed: error %d\n", __func__,
drivers/media/usb/ttusb-dec/ttusb_dec.c
1494
printk("%s: dvb_dmxdev_init failed: error %d\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
1507
printk("%s: dvb_dmx_init failed: error %d\n", __func__,
drivers/media/usb/ttusb-dec/ttusb_dec.c
1519
printk("%s: dvb_dmx_init failed: error %d\n", __func__,
drivers/media/usb/ttusb-dec/ttusb_dec.c
1646
printk("%s: couldn't allocate memory.\n", __func__);
drivers/media/usb/ttusb-dec/ttusb_dec.c
1691
printk("dvb-ttusb-dec: A frontend driver was not found for device [%04x:%04x]\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
1696
printk("budget-ci: Frontend registration failed!\n");
drivers/media/usb/ttusb-dec/ttusb_dec.c
298
printk("%s - usb_commit_urb failed with result: %d\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
330
printk("%s: Failed to lock usb mutex.\n", __func__);
drivers/media/usb/ttusb-dec/ttusb_dec.c
343
printk(KERN_DEBUG "%s: command: %*ph\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
351
printk("%s: command bulk message failed: error %d\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
360
printk("%s: result bulk message failed: error %d\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
365
printk(KERN_DEBUG "%s: result: %*ph\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
43
#define dprintk if (debug) printk
drivers/media/usb/ttusb-dec/ttusb_dec.c
464
printk("%s: packet too short - discarding\n", __func__);
drivers/media/usb/ttusb-dec/ttusb_dec.c
469
printk("%s: packet too long - discarding\n", __func__);
drivers/media/usb/ttusb-dec/ttusb_dec.c
552
printk("%s: unknown PVA type: %02x.\n", __func__,
drivers/media/usb/ttusb-dec/ttusb_dec.c
591
printk("%s: odd sized packet - discarding\n", __func__);
drivers/media/usb/ttusb-dec/ttusb_dec.c
599
printk("%s: checksum failed - discarding\n", __func__);
drivers/media/usb/ttusb-dec/ttusb_dec.c
607
printk("%s: warning: lost packets between %u and %u\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
691
printk("%s: unknown packet type: %02x%02x\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
763
printk("%s: illegal packet state encountered.\n",
drivers/media/usb/ttusb-dec/ttusb_dec.c
943
printk("%s: failed urb submission %d: error %d\n",
drivers/media/usb/ttusb-dec/ttusbdecfe.c
52
printk(KERN_ERR "%s: unexpected reply\n", __func__);
drivers/media/v4l2-core/tuner-core.c
195
printk(KERN_ERR "TUNER: Unable to find " \
drivers/media/v4l2-core/tuner-core.c
94
printk(KERN_DEBUG pr_fmt("%s: " fmt), __func__, ##arg); \
drivers/media/v4l2-core/v4l2-ctrls-priv.h
13
printk(KERN_DEBUG pr_fmt("%s: %s: " fmt), \
drivers/media/v4l2-core/v4l2-dev.c
38
printk(KERN_DEBUG pr_fmt("%s: " fmt), \
drivers/media/v4l2-core/v4l2-ioctl.c
3034
printk(KERN_DEBUG "%s: ", prefix);
drivers/media/v4l2-core/v4l2-ioctl.c
306
printk(KERN_DEBUG "plane %u: bytesperline=%u sizeimage=%u\n", i,
drivers/media/v4l2-core/v4l2-ioctl.c
333
printk(KERN_DEBUG "line[%02u]=0x%04x, 0x%04x\n", i,
drivers/media/v4l2-core/v4l2-ioctl.c
459
printk(KERN_DEBUG
drivers/media/v4l2-core/v4l2-ioctl.c
469
printk(KERN_DEBUG "timecode=%02d:%02d:%02d type=%d, flags=0x%08x, frames=%d, userbits=0x%08x\n",
drivers/media/v4l2-core/v4l2-ioctl.c
799
printk(KERN_DEBUG "field=%s\n",
drivers/media/v4l2-core/v4l2-ioctl.c
804
printk(KERN_DEBUG "changes=0x%x, type=%u, ",
drivers/media/v4l2-core/v4l2-ioctl.c
837
printk(KERN_DEBUG "line[%02u]=0x%04x, 0x%04x\n", i,
drivers/media/v4l2-core/v4l2-mem2mem.c
34
printk(KERN_DEBUG "%s: " fmt, __func__, ## arg);\
drivers/memstick/core/mspro_block.c
1372
printk(KERN_ERR DRIVER_NAME ": failed to register "
drivers/memstick/core/mspro_block.c
827
printk(KERN_WARNING
drivers/memstick/core/mspro_block.c
835
printk(KERN_INFO "%s: switching to 4-bit parallel mode\n",
drivers/memstick/core/mspro_block.c
845
printk(KERN_INFO
drivers/memstick/core/mspro_block.c
849
printk(KERN_WARNING
drivers/memstick/core/mspro_block.c
862
printk(KERN_WARNING
drivers/memstick/core/mspro_block.c
929
printk(KERN_ERR "%s: unrecognized device signature %x\n",
drivers/memstick/core/mspro_block.c
936
printk(KERN_WARNING "%s: way too many attribute entries\n",
drivers/memstick/host/r592.h
158
printk(KERN_INFO DRV_NAME ": " format "\n", ## __VA_ARGS__)
drivers/memstick/host/r592.h
163
printk(KERN_DEBUG DRV_NAME \
drivers/memstick/host/tifm_ms.c
541
printk(KERN_ERR
drivers/memstick/host/tifm_ms.c
558
printk(KERN_WARNING "%s : card gone, unexpectedly\n",
drivers/message/fusion/mptbase.c
1006
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d\n",
drivers/message/fusion/mptbase.c
1105
printk(KERN_DEBUG "1078 P0M2 addressing for "
drivers/message/fusion/mptbase.c
1219
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_send_handshake_request start, WaitCnt=%d\n",
drivers/message/fusion/mptbase.c
1328
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
1343
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptbase.c
1650
printk(MYIOC_s_ERR_FMT "pci_enable_device_mem() "
drivers/message/fusion/mptbase.c
1655
printk(MYIOC_s_ERR_FMT "pci_request_selected_regions() with "
drivers/message/fusion/mptbase.c
1667
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
drivers/message/fusion/mptbase.c
1673
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
drivers/message/fusion/mptbase.c
1677
printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
drivers/message/fusion/mptbase.c
1685
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
drivers/message/fusion/mptbase.c
1689
printk(MYIOC_s_WARN_FMT "no suitable DMA mask for %s\n",
drivers/message/fusion/mptbase.c
1719
printk(MYIOC_s_ERR_FMT ": ERROR - Unable to map adapter"
drivers/message/fusion/mptbase.c
1725
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "mem = %p, mem_phys = %llx\n",
drivers/message/fusion/mptbase.c
1776
printk(KERN_ERR MYNAM ": ERROR - Insufficient memory to add adapter!\n");
drivers/message/fusion/mptbase.c
1782
dinitprintk(ioc, printk(KERN_WARNING MYNAM ": mpt_adapter_install\n"));
drivers/message/fusion/mptbase.c
1791
printk(KERN_INFO "mpt_debug_level=%xh\n", mpt_debug_level);
drivers/message/fusion/mptbase.c
1793
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": mpt_adapter_install\n", ioc->name));
drivers/message/fusion/mptbase.c
1863
printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
drivers/message/fusion/mptbase.c
1869
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "facts @ %p, pfacts[0] @ %p\n",
drivers/message/fusion/mptbase.c
1992
printk(MYIOC_s_ERR_FMT "Insufficient memory to add adapter!\n",
drivers/message/fusion/mptbase.c
2000
printk(MYIOC_s_ERR_FMT "didn't initialize properly! (%d)\n",
drivers/message/fusion/mptbase.c
2146
printk(MYIOC_s_INFO_FMT "pci-suspend: pdev=0x%p, slot=%s, Entering "
drivers/message/fusion/mptbase.c
2152
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptbase.c
2187
printk(MYIOC_s_INFO_FMT "pci-resume: pdev=0x%p, slot=%s, Previous "
drivers/message/fusion/mptbase.c
2214
printk(MYIOC_s_INFO_FMT "pci-resume: ioc-state=0x%x,doorbell=0x%x\n",
drivers/message/fusion/mptbase.c
2229
printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover\n",
drivers/message/fusion/mptbase.c
2236
printk(MYIOC_s_INFO_FMT "Sending mpt_do_ioc_recovery\n", ioc->name);
drivers/message/fusion/mptbase.c
2240
printk(MYIOC_s_WARN_FMT "pci-resume: Cannot recover, "
drivers/message/fusion/mptbase.c
2243
printk(MYIOC_s_INFO_FMT
drivers/message/fusion/mptbase.c
2301
printk(MYIOC_s_INFO_FMT "Initiating %s\n", ioc->name,
drivers/message/fusion/mptbase.c
2327
printk(MYIOC_s_WARN_FMT "Owned by PEER..skipping!\n",
drivers/message/fusion/mptbase.c
2332
dprintk(ioc, printk(MYIOC_s_INFO_FMT
drivers/message/fusion/mptbase.c
2339
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptbase.c
2353
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptbase.c
2366
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
2375
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
2383
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
2413
printk(MYIOC_s_INFO_FMT "PCI-MSI enabled\n",
drivers/message/fusion/mptbase.c
2420
printk(MYIOC_s_ERR_FMT "Unable to allocate "
drivers/message/fusion/mptbase.c
2432
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
drivers/message/fusion/mptbase.c
2443
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "PrimeIocFifos\n",
drivers/message/fusion/mptbase.c
2451
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT "SendIocInit\n",
drivers/message/fusion/mptbase.c
2457
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptbase.c
2468
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptbase.c
2476
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
2492
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
2498
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptbase.c
2510
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
drivers/message/fusion/mptbase.c
2527
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "alt-ioc"
drivers/message/fusion/mptbase.c
2583
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
2645
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PCI device %s devfn=%x/%x,"
drivers/message/fusion/mptbase.c
2662
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptbase.c
2667
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptbase.c
2673
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
2695
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
2699
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptbase.c
2712
printk(MYIOC_s_ERR_FMT "%s: IOC msg unit "
drivers/message/fusion/mptbase.c
2716
printk(MYIOC_s_ERR_FMT "%s: IOC msg unit reset "
drivers/message/fusion/mptbase.c
2732
dexitprintk(ioc, printk(MYIOC_s_INFO_FMT "free @ %p, sz=%d bytes\n",
drivers/message/fusion/mptbase.c
2787
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptbase.c
2791
dexitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
2843
dprintk(ioc, printk(MYIOC_s_INFO_FMT "free'd %d of %d bytes\n",
drivers/message/fusion/mptbase.c
2862
printk(KERN_INFO "%s: ", ioc->name);
drivers/message/fusion/mptbase.c
2923
dhsprintk(ioc, printk(MYIOC_s_INFO_FMT "MakeIocReady [raw] state=%08x\n", ioc->name, ioc_state));
drivers/message/fusion/mptbase.c
2931
printk(MYIOC_s_WARN_FMT "Unexpected doorbell active!\n",
drivers/message/fusion/mptbase.c
2938
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
drivers/message/fusion/mptbase.c
2948
printk(MYIOC_s_WARN_FMT "IOC is in FAULT state!!!\n",
drivers/message/fusion/mptbase.c
2950
printk(MYIOC_s_WARN_FMT " FAULT code = %04xh\n",
drivers/message/fusion/mptbase.c
2958
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOC operational unexpected\n",
drivers/message/fusion/mptbase.c
2967
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT
drivers/message/fusion/mptbase.c
2998
printk(MYIOC_s_ERR_FMT "IOC msg unit reset failed!\n", ioc->name);
drivers/message/fusion/mptbase.c
3007
printk(MYIOC_s_ERR_FMT "IO unit reset failed!\n", ioc->name);
drivers/message/fusion/mptbase.c
3014
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptbase.c
3029
printk(MYIOC_s_INFO_FMT "Recovered from %s\n", ioc->name,
drivers/message/fusion/mptbase.c
3083
printk(KERN_ERR MYNAM
drivers/message/fusion/mptbase.c
3102
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
3186
printk(MYIOC_s_ERR_FMT "IOC reported invalid 0 request size!\n",
drivers/message/fusion/mptbase.c
3200
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
3214
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "reply_sz=%3d, reply_depth=%4d\n",
drivers/message/fusion/mptbase.c
3216
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "req_sz =%3d, req_depth =%4d\n",
drivers/message/fusion/mptbase.c
3224
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptbase.c
3255
printk(MYIOC_s_ERR_FMT "Can't get PortFacts NOT READY! (%08x)\n",
drivers/message/fusion/mptbase.c
3274
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending get PortFacts(%d) request\n",
drivers/message/fusion/mptbase.c
3350
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "upload_fw %d facts.Flags=%x\n",
drivers/message/fusion/mptbase.c
3356
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "facts.MsgVersion=%x\n",
drivers/message/fusion/mptbase.c
3387
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOCInit (req @ %p)\n",
drivers/message/fusion/mptbase.c
3393
printk(MYIOC_s_ERR_FMT "Sending IOCInit failed(%d)!\n",ioc->name, r);
drivers/message/fusion/mptbase.c
3401
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending PortEnable (req @ %p)\n",
drivers/message/fusion/mptbase.c
3405
printk(MYIOC_s_ERR_FMT "Sending PortEnable failed(%d)!\n",ioc->name, r);
drivers/message/fusion/mptbase.c
3424
printk(MYIOC_s_ERR_FMT "Wait IOC_OP state timeout(%d)!\n",
drivers/message/fusion/mptbase.c
3432
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wait IOC_OPERATIONAL state (cnt=%d)\n",
drivers/message/fusion/mptbase.c
3472
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending Port(%d)Enable (req @ %p)\n",
drivers/message/fusion/mptbase.c
3517
printk(MYIOC_s_ERR_FMT "Unable to allocate memory for the cached firmware image!\n",
drivers/message/fusion/mptbase.c
3521
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Image @ %p[%p], sz=%d[%x] bytes\n",
drivers/message/fusion/mptbase.c
3546
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "free_fw_memory: FW Image @ %p[%p], sz=%d[%x] bytes\n",
drivers/message/fusion/mptbase.c
3587
dinitprintk(ioc, printk(MYIOC_s_INFO_FMT ": FW Image @ %p[%p], sz=%d[%x] bytes\n",
drivers/message/fusion/mptbase.c
3593
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed "
drivers/message/fusion/mptbase.c
3617
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending FW Upload "
drivers/message/fusion/mptbase.c
3625
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FW Upload completed "
drivers/message/fusion/mptbase.c
3641
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": do_upload cmdStatus=%d \n",
drivers/message/fusion/mptbase.c
3646
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "fw upload failed, "
drivers/message/fusion/mptbase.c
3682
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot: fw size 0x%x (%d), FW Ptr %p\n",
drivers/message/fusion/mptbase.c
3707
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RESET_ADAPTER cleared, count=%d\n",
drivers/message/fusion/mptbase.c
3720
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot failed! "
drivers/message/fusion/mptbase.c
373
printk(MYIOC_s_INFO_FMT "%s: IOC is non-operational !!!!\n",
drivers/message/fusion/mptbase.c
3746
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "LoadStart addr written 0x%x \n",
drivers/message/fusion/mptbase.c
3749
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write FW Image: 0x%x bytes @ %p\n",
drivers/message/fusion/mptbase.c
3764
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write Ext Image: 0x%x (%d) bytes @ %p load_addr=%x\n",
drivers/message/fusion/mptbase.c
3775
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Addr=%x! \n", ioc->name, pFwHeader->IopResetRegAddr));
drivers/message/fusion/mptbase.c
3779
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Write IopResetVector Value=%x! \n", ioc->name, pFwHeader->IopResetVectorValue));
drivers/message/fusion/mptbase.c
3813
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot diag0val=%x, "
drivers/message/fusion/mptbase.c
3817
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "downloadboot now diag0val=%x\n",
drivers/message/fusion/mptbase.c
3828
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "GetIocFacts failed: IocState=%x\n",
drivers/message/fusion/mptbase.c
3836
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
3843
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
3848
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
3859
ddlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
3897
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStarting!\n", ioc->name));
drivers/message/fusion/mptbase.c
390
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptbase.c
3915
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset successful!\n",
drivers/message/fusion/mptbase.c
3922
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "KickStart successful! (cnt=%d)\n",
drivers/message/fusion/mptbase.c
3933
dinitprintk(ioc, printk(MYIOC_s_ERR_FMT "Failed to come READY after reset! IocState=%x\n",
drivers/message/fusion/mptbase.c
394
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptbase.c
3976
drsprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: Doorbell=%p; 1078 reset "
drivers/message/fusion/mptbase.c
4001
drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
4025
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG1: diag0=%08x, diag1=%08x\n",
drivers/message/fusion/mptbase.c
403
printk(MYIOC_s_WARN_FMT "IOC is in FAULT state (%04xh)!!!\n",
drivers/message/fusion/mptbase.c
405
printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
drivers/message/fusion/mptbase.c
4053
printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
drivers/message/fusion/mptbase.c
4061
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Wrote magic DiagWriteEn sequence (%x)\n",
drivers/message/fusion/mptbase.c
4068
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG2: diag0=%08x, diag1=%08x\n",
drivers/message/fusion/mptbase.c
408
printk(MYIOC_s_WARN_FMT "%s: HardReset: %s\n", ioc->name,
drivers/message/fusion/mptbase.c
4084
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Diagnostic reset performed\n",
drivers/message/fusion/mptbase.c
412
printk(MYIOC_s_WARN_FMT "IOC is in FAULT state after "
drivers/message/fusion/mptbase.c
4121
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "cached_fw: diag0val=%x count=%d\n",
drivers/message/fusion/mptbase.c
4131
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptbase.c
4146
drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
4163
printk(MYIOC_s_ERR_FMT "Failed to come READY "
drivers/message/fusion/mptbase.c
417
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "clearing "
drivers/message/fusion/mptbase.c
4173
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG3: diag0=%08x, diag1=%08x\n",
drivers/message/fusion/mptbase.c
4202
printk(MYIOC_s_ERR_FMT "Enable Diagnostic mode FAILED! (%02xh)\n",
drivers/message/fusion/mptbase.c
4212
printk(MYIOC_s_WARN_FMT "ResetHistory bit failed to clear!\n",
drivers/message/fusion/mptbase.c
4224
printk(MYIOC_s_ERR_FMT "Diagnostic reset FAILED! (%02xh)\n",
drivers/message/fusion/mptbase.c
4232
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DbG4: diag0=%08x, diag1=%08x\n",
drivers/message/fusion/mptbase.c
4266
drsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending IOC reset(0x%02x)!\n",
drivers/message/fusion/mptbase.c
4284
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptbase.c
4332
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReqToChain alloc @ %p, sz=%d bytes\n",
drivers/message/fusion/mptbase.c
4339
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestNB alloc @ %p, sz=%d bytes\n",
drivers/message/fusion/mptbase.c
4369
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "num_sge=%d numSGE=%d\n",
drivers/message/fusion/mptbase.c
4387
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Now numSGE=%d num_sge=%d num_chain=%d\n",
drivers/message/fusion/mptbase.c
4406
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainToChain alloc @ %p, sz=%d bytes\n",
drivers/message/fusion/mptbase.c
4451
d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
4462
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptbase.c
4471
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d bytes, ReplyDepth=%d\n",
drivers/message/fusion/mptbase.c
4473
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffer sz=%d[%x] bytes\n",
drivers/message/fusion/mptbase.c
4477
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d bytes, RequestDepth=%d\n",
drivers/message/fusion/mptbase.c
4479
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffer sz=%d[%x] bytes\n",
drivers/message/fusion/mptbase.c
4484
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d bytes, ChainDepth=%d\n",
drivers/message/fusion/mptbase.c
4486
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffer sz=%d[%x] bytes num_chain=%d\n",
drivers/message/fusion/mptbase.c
4493
printk(MYIOC_s_ERR_FMT "Unable to allocate Reply, Request, Chain Buffers!\n",
drivers/message/fusion/mptbase.c
4498
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Total alloc @ %p[%p], sz=%d[%x] bytes\n",
drivers/message/fusion/mptbase.c
450
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got TURBO reply req_idx=%08x\n",
drivers/message/fusion/mptbase.c
4509
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
drivers/message/fusion/mptbase.c
4520
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RequestBuffers @ %p[%p]\n",
drivers/message/fusion/mptbase.c
4533
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ChainBuffers @ %p(%p)\n",
drivers/message/fusion/mptbase.c
4571
printk(MYIOC_s_ERR_FMT "Unable to allocate Sense Buffers!\n",
drivers/message/fusion/mptbase.c
4578
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SenseBuffers @ %p[%p]\n",
drivers/message/fusion/mptbase.c
4586
dinitprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ReplyBuffers @ %p[%p]\n",
drivers/message/fusion/mptbase.c
4598
d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
4623
d36memprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
4679
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request start reqBytes=%d, WaitCnt=%d%s\n",
drivers/message/fusion/mptbase.c
4714
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handshake request frame (@%p) header\n", ioc->name, req));
drivers/message/fusion/mptbase.c
4717
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake request post done, WaitCnt=%d%s\n",
drivers/message/fusion/mptbase.c
4726
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HandShake reply count=%d%s\n",
drivers/message/fusion/mptbase.c
4782
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell ACK (count=%d)\n",
drivers/message/fusion/mptbase.c
4787
printk(MYIOC_s_ERR_FMT "Doorbell ACK timeout (count=%d), IntStatus=%x!\n",
drivers/message/fusion/mptbase.c
4831
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell INT (cnt=%d) howlong=%d\n",
drivers/message/fusion/mptbase.c
4836
printk(MYIOC_s_ERR_FMT "Doorbell INT timeout (count=%d), IntStatus=%x!\n",
drivers/message/fusion/mptbase.c
4883
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitCnt=%d First handshake reply word=%08x%s\n",
drivers/message/fusion/mptbase.c
4906
printk(MYIOC_s_ERR_FMT "Handshake reply failure!\n",
drivers/message/fusion/mptbase.c
491
printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
drivers/message/fusion/mptbase.c
4919
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got Handshake reply:\n", ioc->name));
drivers/message/fusion/mptbase.c
4922
dhsprintk(ioc, printk(MYIOC_s_DEBUG_FMT "WaitForDoorbell REPLY WaitCnt=%d (sz=%d)\n",
drivers/message/fusion/mptbase.c
5088
printk(KERN_DEBUG "%s: persist_opcode=%x\n",
drivers/message/fusion/mptbase.c
5094
printk(KERN_DEBUG "%s: no msg frames!\n", __func__);
drivers/message/fusion/mptbase.c
5110
printk(KERN_DEBUG "%s: failed\n", __func__);
drivers/message/fusion/mptbase.c
5114
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptbase.c
5131
printk(KERN_DEBUG "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
drivers/message/fusion/mptbase.c
5134
printk(KERN_DEBUG "%s: failed\n", __func__);
drivers/message/fusion/mptbase.c
5137
printk(KERN_DEBUG "%s: success\n", __func__);
drivers/message/fusion/mptbase.c
5172
printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for PhysDisk %d id=%d\n",
drivers/message/fusion/mptbase.c
5175
printk(MYIOC_s_INFO_FMT "RAID STATUS CHANGE for VolumeID %d\n",
drivers/message/fusion/mptbase.c
5181
printk(MYIOC_s_INFO_FMT " volume has been created\n",
drivers/message/fusion/mptbase.c
5187
printk(MYIOC_s_INFO_FMT " volume has been deleted\n",
drivers/message/fusion/mptbase.c
5192
printk(MYIOC_s_INFO_FMT " volume settings have been changed\n",
drivers/message/fusion/mptbase.c
5197
printk(MYIOC_s_INFO_FMT " volume is now %s%s%s%s\n",
drivers/message/fusion/mptbase.c
5215
printk(MYIOC_s_INFO_FMT " volume membership of PhysDisk %d has changed\n",
drivers/message/fusion/mptbase.c
5220
printk(MYIOC_s_INFO_FMT " PhysDisk has been created\n",
drivers/message/fusion/mptbase.c
5225
printk(MYIOC_s_INFO_FMT " PhysDisk has been deleted\n",
drivers/message/fusion/mptbase.c
5230
printk(MYIOC_s_INFO_FMT " PhysDisk settings have been changed\n",
drivers/message/fusion/mptbase.c
5235
printk(MYIOC_s_INFO_FMT " PhysDisk is now %s%s%s\n",
drivers/message/fusion/mptbase.c
5261
printk(MYIOC_s_INFO_FMT " Domain Validation needed for PhysDisk %d\n",
drivers/message/fusion/mptbase.c
5266
printk(MYIOC_s_INFO_FMT " SMART data received, ASC/ASCQ = %02xh/%02xh\n",
drivers/message/fusion/mptbase.c
5271
printk(MYIOC_s_INFO_FMT " replacement of PhysDisk %d has started\n",
drivers/message/fusion/mptbase.c
532
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Got non-TURBO reply=%p req_idx=%x cb_idx=%x Function=%x\n",
drivers/message/fusion/mptbase.c
5380
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SCSI device NVRAM settings @ %p, sz=%d\n",
drivers/message/fusion/mptbase.c
5418
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
5430
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
5440
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
5457
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
555
printk(MYIOC_s_WARN_FMT "%s: Invalid cb_idx (%d)!\n",
drivers/message/fusion/mptbase.c
5612
dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 0: version %d length %d\n",
drivers/message/fusion/mptbase.c
5615
dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Headers: 1: version %d length %d\n",
drivers/message/fusion/mptbase.c
6191
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Coalescing Enabled Timeout = %d\n",
drivers/message/fusion/mptbase.c
6202
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Reset Current Coalescing Timeout to = %d\n",
drivers/message/fusion/mptbase.c
6207
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
6211
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
6217
dprintk(ioc, printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptbase.c
6224
dprintk(ioc, printk(MYIOC_s_WARN_FMT "Coalescing Disabled\n", ioc->name));
drivers/message/fusion/mptbase.c
6298
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
6319
dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s, no msg frames!!\n",
drivers/message/fusion/mptbase.c
6324
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Sending EventAck\n", ioc->name));
drivers/message/fusion/mptbase.c
6374
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
6384
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
6400
dcprintk(ioc, printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptbase.c
6457
dcprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
6468
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
6480
printk(MYIOC_s_INFO_FMT "%s: host reset in"
drivers/message/fusion/mptbase.c
6513
printk(MYIOC_s_INFO_FMT "Retry completed "
drivers/message/fusion/mptbase.c
6517
dcprintk(ioc, printk(KERN_DEBUG "IOCStatus=%04xh, IOCLogInfo=%08xh\n",
drivers/message/fusion/mptbase.c
6526
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptbase.c
6538
printk(MYIOC_s_INFO_FMT
drivers/message/fusion/mptbase.c
6565
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
6569
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
6573
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
661
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
665
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptbase.c
6944
printk(MYIOC_s_ERR_FMT "IOC is in FAULT state (%04xh)!!!\n",
drivers/message/fusion/mptbase.c
6979
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SoftResetHandler Entered!\n",
drivers/message/fusion/mptbase.c
6989
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
6995
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
7090
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
7148
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "HardResetHandler Entered!\n", ioc->name));
drivers/message/fusion/mptbase.c
7150
printk(MYIOC_s_INFO_FMT "HardResetHandler Entered!\n", ioc->name);
drivers/message/fusion/mptbase.c
7151
printk("MF count 0x%x !\n", ioc->mfcnt);
drivers/message/fusion/mptbase.c
7198
printk(KERN_WARNING MYNAM
drivers/message/fusion/mptbase.c
7228
printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
7670
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
7674
devtverboseprintk(ioc, printk(KERN_DEBUG MYNAM
drivers/message/fusion/mptbase.c
7677
devtverboseprintk(ioc, printk(" %08x",
drivers/message/fusion/mptbase.c
7679
devtverboseprintk(ioc, printk(KERN_DEBUG "\n"));
drivers/message/fusion/mptbase.c
7770
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
7783
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptbase.c
7786
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SendEventAck returned %d\n",
drivers/message/fusion/mptbase.c
7835
printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): SubClass={%s}, Value=(0x%06x)\n",
drivers/message/fusion/mptbase.c
7904
printk(MYIOC_s_INFO_FMT "LogInfo(0x%08x): F/W: %s\n", ioc->name, log_info, desc);
drivers/message/fusion/mptbase.c
8112
printk(MYIOC_s_INFO_FMT
drivers/message/fusion/mptbase.c
8118
printk(MYIOC_s_INFO_FMT
drivers/message/fusion/mptbase.c
8124
printk(MYIOC_s_INFO_FMT
drivers/message/fusion/mptbase.c
8207
dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s: %s\n",
drivers/message/fusion/mptbase.c
8434
dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT "IOCStatus(0x%04X): %s\n",
drivers/message/fusion/mptbase.c
8482
printk(KERN_INFO COPYRIGHT "\n");
drivers/message/fusion/mptbase.c
895
printk(MYIOC_s_WARN_FMT "IOC Not Active! mpt_get_msg_frame "
drivers/message/fusion/mptbase.c
929
printk(MYIOC_s_WARN_FMT "IOC Active. No free Msg Frames! "
drivers/message/fusion/mptbase.c
934
printk(MYIOC_s_INFO_FMT "MF Count 0x%x Max 0x%x \n", ioc->name,
drivers/message/fusion/mptbase.c
938
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mpt_get_msg_frame(%d,%d), got mf=%p\n",
drivers/message/fusion/mptbase.c
971
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mf_dma_addr=%x req_idx=%d "
drivers/message/fusion/mptbase.h
84
printk(KERN_INFO "%s %s\n", s, ver);
drivers/message/fusion/mptctl.c
1070
printk(MYIOC_s_WARN_FMT "-SG: No can do - "
drivers/message/fusion/mptctl.c
1072
printk(MYIOC_s_WARN_FMT "-SG: (freeing %d frags)\n",
drivers/message/fusion/mptctl.c
1098
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptctl.c
1100
printk(MYIOC_s_WARN_FMT "(freeing %d frags)\n", ioc->name, numfrags);
drivers/message/fusion/mptctl.c
1107
printk(MYIOC_s_WARN_FMT "-SG: No can do - "
drivers/message/fusion/mptctl.c
1109
printk(MYIOC_s_WARN_FMT "-SG: (freeing %d frags)\n",
drivers/message/fusion/mptctl.c
1121
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: kbuf_alloc_2_sgl() - "
drivers/message/fusion/mptctl.c
1124
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: kbuf_alloc_2_sgl() - "
drivers/message/fusion/mptctl.c
1211
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "-SG: Free'd 1 SGL buf + %d kbufs!\n",
drivers/message/fusion/mptctl.c
1253
printk(KERN_ERR MYNAM "%s@%d::mpt_ioctl_iocinfo() - memdup_user returned error [%ld]\n",
drivers/message/fusion/mptctl.c
1260
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_getiocinfo - "
drivers/message/fusion/mptctl.c
1267
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_getiocinfo called.\n",
drivers/message/fusion/mptctl.c
1341
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_getiocinfo - "
drivers/message/fusion/mptctl.c
1377
printk(KERN_ERR MYNAM "%s@%d::mptctl_gettargetinfo - "
drivers/message/fusion/mptctl.c
1383
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_gettargetinfo called.\n",
drivers/message/fusion/mptctl.c
1389
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo() - no memory available!\n",
drivers/message/fusion/mptctl.c
1410
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo() - no memory available!\n",
drivers/message/fusion/mptctl.c
1442
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo - "
drivers/message/fusion/mptctl.c
1452
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_gettargetinfo - "
drivers/message/fusion/mptctl.c
1479
printk(KERN_ERR MYNAM "%s@%d::mptctl_readtest - "
drivers/message/fusion/mptctl.c
1485
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_readtest called.\n",
drivers/message/fusion/mptctl.c
1502
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_readtest - "
drivers/message/fusion/mptctl.c
1529
printk(KERN_ERR MYNAM "%s@%d::mptctl_eventquery - "
drivers/message/fusion/mptctl.c
1535
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventquery called.\n",
drivers/message/fusion/mptctl.c
1543
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_eventquery - "
drivers/message/fusion/mptctl.c
1559
printk(KERN_ERR MYNAM "%s@%d::mptctl_eventenable - "
drivers/message/fusion/mptctl.c
1565
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventenable called.\n",
drivers/message/fusion/mptctl.c
1573
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptctl.c
1599
printk(KERN_ERR MYNAM "%s@%d::mptctl_eventreport - "
drivers/message/fusion/mptctl.c
1605
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_eventreport called.\n",
drivers/message/fusion/mptctl.c
1627
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_eventreport - "
drivers/message/fusion/mptctl.c
1645
printk(KERN_ERR MYNAM "%s@%d::mptctl_replace_fw - "
drivers/message/fusion/mptctl.c
1651
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_replace_fw called.\n",
drivers/message/fusion/mptctl.c
1671
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_replace_fw - "
drivers/message/fusion/mptctl.c
1705
printk(KERN_ERR MYNAM "%s@%d::mptctl_mpt_command - "
drivers/message/fusion/mptctl.c
1757
printk(KERN_ERR MYNAM "%s@%d::mptctl_do_mpt_command - "
drivers/message/fusion/mptctl.c
1781
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
drivers/message/fusion/mptctl.c
1801
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
drivers/message/fusion/mptctl.c
1814
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sending mpi function (0x%02X), req=%p\n",
drivers/message/fusion/mptctl.c
1827
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\ttype=0x%02x ext_type=0x%02x "
drivers/message/fusion/mptctl.c
1856
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
drivers/message/fusion/mptctl.c
1864
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
drivers/message/fusion/mptctl.c
1919
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
drivers/message/fusion/mptctl.c
1938
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
drivers/message/fusion/mptctl.c
1995
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
drivers/message/fusion/mptctl.c
2007
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
2037
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
drivers/message/fusion/mptctl.c
2070
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
drivers/message/fusion/mptctl.c
210
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "completing mpi function "
drivers/message/fusion/mptctl.c
2124
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptctl.c
2179
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptctl.c
2199
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "%s: TIMED OUT!\n",
drivers/message/fusion/mptctl.c
2207
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptctl.c
2239
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptctl.c
2256
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
drivers/message/fusion/mptctl.c
2274
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_do_mpt_command - "
drivers/message/fusion/mptctl.c
231
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
2345
printk(KERN_ERR MYNAM "%s@%d::mptctl_hp_host_info - "
drivers/message/fusion/mptctl.c
2351
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": mptctl_hp_hostinfo called.\n",
drivers/message/fusion/mptctl.c
241
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
2462
dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptctl.c
2496
printk(MYIOC_s_WARN_FMT "%s: failed\n", ioc->name, __func__);
drivers/message/fusion/mptctl.c
2502
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptctl.c
2533
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_hpgethostinfo - "
drivers/message/fusion/mptctl.c
2569
printk(KERN_ERR MYNAM "%s@%d::mptctl_hp_targetinfo - "
drivers/message/fusion/mptctl.c
2577
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "mptctl_hp_targetinfo called.\n",
drivers/message/fusion/mptctl.c
2681
printk(MYIOC_s_ERR_FMT "%s@%d::mptctl_hp_target_info - "
drivers/message/fusion/mptctl.c
2730
printk(KERN_DEBUG MYNAM "::compat_mptfwxfer_ioctl @%d - ioc%d not found!\n",
drivers/message/fusion/mptctl.c
2738
dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "compat_mptfwxfer_ioctl() called\n",
drivers/message/fusion/mptctl.c
2770
printk(KERN_DEBUG MYNAM "::compat_mpt_command @%d - ioc%d not found!\n",
drivers/message/fusion/mptctl.c
2778
dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "compat_mpt_command() called\n",
drivers/message/fusion/mptctl.c
2888
printk(KERN_ERR MYNAM ": Can't register misc device [minor=%d].\n", MPT_MINOR);
drivers/message/fusion/mptctl.c
2891
printk(KERN_INFO MYNAM ": Registered with Fusion MPT base driver\n");
drivers/message/fusion/mptctl.c
2892
printk(KERN_INFO MYNAM ": /dev/%s @ (major,minor=%d,%d)\n",
drivers/message/fusion/mptctl.c
2901
printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n");
drivers/message/fusion/mptctl.c
291
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
2910
printk(KERN_ERR MYNAM ": ERROR: Failed to register with Fusion MPT base driver\n");
drivers/message/fusion/mptctl.c
2933
printk(KERN_INFO MYNAM ": Deregistered /dev/%s @ (major,minor=%d,%d)\n",
drivers/message/fusion/mptctl.c
338
printk(MYIOC_s_WARN_FMT "TaskMgmt, no msg frames!!\n",
drivers/message/fusion/mptctl.c
345
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
drivers/message/fusion/mptctl.c
381
printk(MYIOC_s_DEBUG_FMT "TaskMgmt type=%d timeout=%ld\n",
drivers/message/fusion/mptctl.c
393
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptctl.c
407
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
419
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
426
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
443
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
468
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT ": %s\n",
drivers/message/fusion/mptctl.c
507
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Calling Reset! \n",
drivers/message/fusion/mptctl.c
526
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
530
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
534
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
557
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s() called\n",
drivers/message/fusion/mptctl.c
568
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Raised SIGIO to application\n",
drivers/message/fusion/mptctl.c
570
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
588
dctlprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
590
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
629
printk(KERN_ERR MYNAM "%s::mptctl_ioctl() @%d - "
drivers/message/fusion/mptctl.c
644
printk(KERN_DEBUG MYNAM "%s::mptctl_ioctl() @%d - Controller disabled.\n",
drivers/message/fusion/mptctl.c
710
printk(KERN_ERR MYNAM "%s@%d::mptctl_do_reset - "
drivers/message/fusion/mptctl.c
716
dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "mptctl_do_reset called.\n",
drivers/message/fusion/mptctl.c
720
printk (MYIOC_s_ERR_FMT "%s@%d::mptctl_do_reset - reset failed.\n",
drivers/message/fusion/mptctl.c
752
printk(KERN_ERR MYNAM "%s@%d::_ioctl_fwdl - "
drivers/message/fusion/mptctl.c
804
dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptctl.c
806
dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.bufp = %p\n",
drivers/message/fusion/mptctl.c
808
dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: kfwdl.fwlen = %d\n",
drivers/message/fusion/mptctl.c
880
dctlprintk(iocp, printk(MYIOC_s_DEBUG_FMT "DbG: sgl buffer = %p, sgfrags = %d\n",
drivers/message/fusion/mptctl.c
905
printk(MYIOC_s_ERR_FMT "%s@%d::_ioctl_fwdl - "
drivers/message/fusion/mptctl.c
932
printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__);
drivers/message/fusion/mptctl.c
938
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptctl.c
948
printk(MYIOC_s_WARN_FMT "%s: failed\n", iocp->name, __func__);
drivers/message/fusion/mptctl.c
960
printk(MYIOC_s_INFO_FMT "F/W update successful!\n", iocp->name);
drivers/message/fusion/mptctl.c
963
printk(MYIOC_s_WARN_FMT "Hmmm... F/W download not supported!?!\n",
drivers/message/fusion/mptctl.c
965
printk(MYIOC_s_WARN_FMT "(time to go bang on somebodies door)\n",
drivers/message/fusion/mptctl.c
969
printk(MYIOC_s_WARN_FMT "IOC_BUSY!\n", iocp->name);
drivers/message/fusion/mptctl.c
970
printk(MYIOC_s_WARN_FMT "(try again later?)\n", iocp->name);
drivers/message/fusion/mptctl.c
973
printk(MYIOC_s_WARN_FMT "ioctl_fwdl() returned [bad] status = %04xh\n",
drivers/message/fusion/mptctl.c
975
printk(MYIOC_s_WARN_FMT "(bad VooDoo)\n", iocp->name);
drivers/message/fusion/mptdebug.h
156
printk(KERN_DEBUG "F/W download request:\n");
drivers/message/fusion/mptdebug.h
158
printk(" %08x", le32_to_cpu(mfp[i]));
drivers/message/fusion/mptdebug.h
159
printk("\n");
drivers/message/fusion/mptdebug.h
169
printk(KERN_DEBUG "%s: About to Put msg frame @ %p:\n",
drivers/message/fusion/mptdebug.h
176
printk("\n");
drivers/message/fusion/mptdebug.h
177
printk(" %08x", le32_to_cpu(mfp[ii]));
drivers/message/fusion/mptdebug.h
179
printk("\n");
drivers/message/fusion/mptdebug.h
190
printk(KERN_INFO " ");
drivers/message/fusion/mptdebug.h
192
printk(" %08x", le32_to_cpu(mfp[i]));
drivers/message/fusion/mptdebug.h
193
printk("\n");
drivers/message/fusion/mptdebug.h
206
printk("\n");
drivers/message/fusion/mptdebug.h
207
printk("%08x ", le32_to_cpu(mfp[i]));
drivers/message/fusion/mptdebug.h
209
printk("\n");
drivers/message/fusion/mptdebug.h
220
printk(KERN_INFO " ");
drivers/message/fusion/mptdebug.h
222
printk(" %08x", le32_to_cpu(mfp[i]));
drivers/message/fusion/mptdebug.h
223
printk("\n");
drivers/message/fusion/mptdebug.h
234
printk(KERN_INFO " ");
drivers/message/fusion/mptdebug.h
236
printk(" %08x", le32_to_cpu(mfp[i]));
drivers/message/fusion/mptdebug.h
237
printk("\n");
drivers/message/fusion/mptdebug.h
248
printk(KERN_DEBUG "TM_REQUEST:\n");
drivers/message/fusion/mptdebug.h
251
printk("\n");
drivers/message/fusion/mptdebug.h
252
printk("%08x ", le32_to_cpu(mfp[i]));
drivers/message/fusion/mptdebug.h
254
printk("\n");
drivers/message/fusion/mptdebug.h
265
printk(KERN_DEBUG "TM_REPLY MessageLength=%d:\n", n);
drivers/message/fusion/mptdebug.h
268
printk("\n");
drivers/message/fusion/mptdebug.h
269
printk(" %08x", le32_to_cpu(mfp[i]));
drivers/message/fusion/mptdebug.h
271
printk("\n");
drivers/message/fusion/mptfc.c
1141
dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptfc.c
1196
dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptfc.c
1230
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptfc.c
1238
printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n",
drivers/message/fusion/mptfc.c
1254
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptfc.c
1263
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptfc.c
1317
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptfc.c
1338
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n",
drivers/message/fusion/mptfc.c
1346
dprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptfc.c
1410
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT "MPT event (=%02Xh) routed to SCSI host driver!\n",
drivers/message/fusion/mptfc.c
1451
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptfc.c
203
dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptfc.c
215
dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptfc.c
235
dfcprintk (hd->ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptfc.c
254
dfcprintk (hd->ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptfc.c
284
dfcprintk (hd->ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptfc.c
523
dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptfc.c
615
dfcprintk (ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptfc.c
655
printk(MYIOC_s_ERR_FMT "sdev_init kmalloc(%zd) FAILED!\n",
drivers/message/fusion/mptfc.c
744
printk(MYIOC_s_NOTE_FMT
drivers/message/fusion/mptfc.c
748
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptfc.c
852
printk(MYIOC_s_INFO_FMT "Firmware discovery not"
drivers/message/fusion/mptlan.c
1011
printk (KERN_ERR MYNAM ": %s/%s: ERROR - Can't allocate skb! (%s@%d)\n",
drivers/message/fusion/mptlan.c
1053
printk (KERN_ERR MYNAM ": %s/%s: ERROR - Can't allocate skb! (%s@%d)\n",
drivers/message/fusion/mptlan.c
1094
printk (KERN_ERR MYNAM ": %s/%s: Yoohoo! mpt_rxfidx_tail = %d, "
drivers/message/fusion/mptlan.c
1104
printk (KERN_WARNING MYNAM ": %s/%s: WARNING - IOC out of buckets! "
drivers/message/fusion/mptlan.c
1109
printk (KERN_INFO MYNAM ": %s/%s: IOC says %d buckets left. "
drivers/message/fusion/mptlan.c
1118
printk (KERN_WARNING MYNAM " Mismatch between driver's "
drivers/message/fusion/mptlan.c
1164
printk (KERN_ERR "%s: Unable to alloc request frame\n",
drivers/message/fusion/mptlan.c
1191
printk (KERN_ERR "%s: Can't alloc context\n",
drivers/message/fusion/mptlan.c
1213
printk (KERN_WARNING
drivers/message/fusion/mptlan.c
1253
/**/ printk (KERN_WARNING MYNAM "/%s: No buckets posted\n",
drivers/message/fusion/mptlan.c
1388
printk(KERN_INFO MYNAM ": %s: PortNum=%x, "
drivers/message/fusion/mptlan.c
1397
printk(KERN_INFO MYNAM ": %s: Hmmm... LAN protocol "
drivers/message/fusion/mptlan.c
1405
printk(KERN_ERR MYNAM ": %s: Unable to register "
drivers/message/fusion/mptlan.c
1411
printk(KERN_INFO MYNAM ": %s: Fusion MPT LAN device "
drivers/message/fusion/mptlan.c
1413
printk(KERN_INFO MYNAM ": %s/%s: "
drivers/message/fusion/mptlan.c
1452
printk (KERN_ERR MYNAM ": Failed to register with MPT base driver\n");
drivers/message/fusion/mptlan.c
1459
printk(KERN_ERR MYNAM ": Eieee! unable to register a reset "
drivers/message/fusion/mptlan.c
1503
printk (KERN_WARNING MYNAM ": %s: WARNING - Broadcast swap F/W bug detected!\n",
drivers/message/fusion/mptlan.c
1505
printk (KERN_WARNING MYNAM ": Please update sender @ MAC_addr = %pM\n",
drivers/message/fusion/mptlan.c
223
printk (KERN_ERR MYNAM "/lan_reply: Got a turbo reply "
drivers/message/fusion/mptlan.c
283
printk (KERN_ERR MYNAM "/lan_reply: Got a non-turbo "
drivers/message/fusion/mptlan.c
383
printk (KERN_WARNING MYNAM "/lan_open: lan_reset failed.");
drivers/message/fusion/mptlan.c
386
printk ("The ioc is active. Perhaps it needs to be"
drivers/message/fusion/mptlan.c
389
printk ("The ioc in inactive, most likely in the "
drivers/message/fusion/mptlan.c
426
printk(KERN_INFO MYNAM ": %s/%s: interface up & active\n",
drivers/message/fusion/mptlan.c
430
printk (KERN_WARNING MYNAM "/lo: Unable to register for Event"
drivers/message/fusion/mptlan.c
538
printk(KERN_INFO MYNAM ": %s/%s: interface down & inactive\n",
drivers/message/fusion/mptlan.c
623
printk (KERN_ERR MYNAM ": %s/%s: ERROR - Invalid SGL sent to IOC!\n",
drivers/message/fusion/mptlan.c
690
printk (KERN_ERR "%s: no tx context available: %u\n",
drivers/message/fusion/mptlan.c
700
printk (KERN_ERR "%s: Unable to alloc request frame\n",
drivers/message/fusion/mptlan.c
861
printk (KERN_ERR MYNAM ": %s/%s: ERROR - Can't allocate skb! (%s@%d)\n",
drivers/message/fusion/mptlan.c
978
printk (KERN_ERR MYNAM ": %s/%s: ERROR - Got a non-TURBO "
drivers/message/fusion/mptlan.c
981
printk (KERN_ERR MYNAM ": MsgFlags = %02x, IOCStatus = %04x\n",
drivers/message/fusion/mptlan.h
110
#define dioprintk(x) printk x
drivers/message/fusion/mptlan.h
116
#define dlprintk(x) printk x
drivers/message/fusion/mptsas.c
1024
printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n",
drivers/message/fusion/mptsas.c
1042
printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n",
drivers/message/fusion/mptsas.c
1075
dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptsas.c
1081
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
drivers/message/fusion/mptsas.c
1096
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
1155
dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptsas.c
1228
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt completed: "
drivers/message/fusion/mptsas.c
1235
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
1274
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
1329
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
1334
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
1338
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
140
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
142
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n",
drivers/message/fusion/mptsas.c
144
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Controller Handle=0x%X\n",
drivers/message/fusion/mptsas.c
1452
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
146
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port=0x%X\n",
drivers/message/fusion/mptsas.c
1461
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
1469
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
148
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Port Flags=0x%X\n",
drivers/message/fusion/mptsas.c
1485
printk(MYIOC_s_INFO_FMT "attaching %s device: fw_channel %d, fw_id %d,"
drivers/message/fusion/mptsas.c
1494
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
150
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Flags=0x%X\n",
drivers/message/fusion/mptsas.c
1502
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
152
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n",
drivers/message/fusion/mptsas.c
1537
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
154
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
1544
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
157
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "DiscoveryStatus=0x%X\n\n",
drivers/message/fusion/mptsas.c
1574
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
1653
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
1658
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: rescan after "
drivers/message/fusion/mptsas.c
167
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
1675
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: fw_event=(0x%p), "
drivers/message/fusion/mptsas.c
169
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
172
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n",
drivers/message/fusion/mptsas.c
174
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
177
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Attached Device Info=0x%X\n",
drivers/message/fusion/mptsas.c
179
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n",
drivers/message/fusion/mptsas.c
181
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Change Count=0x%X\n",
drivers/message/fusion/mptsas.c
183
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Info=0x%X\n\n",
drivers/message/fusion/mptsas.c
1882
printk(MYIOC_s_ERR_FMT "sdev_init kzalloc(%zd) FAILED!\n",
drivers/message/fusion/mptsas.c
189
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
191
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Invalid Dword Count=0x%x\n",
drivers/message/fusion/mptsas.c
193
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
196
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
1963
printk(KERN_ERR MYNAM ": %s: Can't locate host! (sc=%p)\n",
drivers/message/fusion/mptsas.c
1970
printk(KERN_ERR MYNAM ": %s: Wrong bus type (sc=%p)\n",
drivers/message/fusion/mptsas.c
1979
dtmprintk(ioc, printk(MYIOC_s_WARN_FMT ": %s: ioc is in reset,"
drivers/message/fusion/mptsas.c
1987
dtmprintk(ioc, printk(MYIOC_s_WARN_FMT ": %s: target removed "
drivers/message/fusion/mptsas.c
199
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
210
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
212
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Handle=0x%X\n",
drivers/message/fusion/mptsas.c
214
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Handle=0x%X\n",
drivers/message/fusion/mptsas.c
216
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Enclosure Handle=0x%X\n",
drivers/message/fusion/mptsas.c
2168
printk(MYIOC_s_INFO_FMT "%s: IOCStatus=0x%X IOCLogInfo=0x%X\n",
drivers/message/fusion/mptsas.c
218
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Slot=0x%X\n",
drivers/message/fusion/mptsas.c
220
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SAS Address=0x%llX\n",
drivers/message/fusion/mptsas.c
222
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Target ID=0x%X\n",
drivers/message/fusion/mptsas.c
224
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Bus=0x%X\n",
drivers/message/fusion/mptsas.c
2256
printk(MYIOC_s_ERR_FMT "%s: multiple segments req %u, rsp %u\n",
drivers/message/fusion/mptsas.c
226
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Parent Phy Num=0x%X\n",
drivers/message/fusion/mptsas.c
228
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Access Status=0x%X\n",
drivers/message/fusion/mptsas.c
230
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Device Info=0x%X\n",
drivers/message/fusion/mptsas.c
232
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Flags=0x%X\n",
drivers/message/fusion/mptsas.c
234
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n\n",
drivers/message/fusion/mptsas.c
2351
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
240
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
242
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Physical Port=0x%X\n",
drivers/message/fusion/mptsas.c
244
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "PHY Identifier=0x%X\n",
drivers/message/fusion/mptsas.c
246
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Negotiated Link Rate=0x%X\n",
drivers/message/fusion/mptsas.c
248
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Programmed Link Rate=0x%X\n",
drivers/message/fusion/mptsas.c
250
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hardware Link Rate=0x%X\n",
drivers/message/fusion/mptsas.c
252
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Owner Device Handle=0x%X\n",
drivers/message/fusion/mptsas.c
254
dsasprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
2878
printk(MYIOC_s_INFO_FMT "%s: host reset in progress!\n",
drivers/message/fusion/mptsas.c
2902
printk(KERN_ERR "Memory allocation failure at %s:%d/%s()!\n",
drivers/message/fusion/mptsas.c
294
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: add (fw_event=0x%p)"
drivers/message/fusion/mptsas.c
2980
printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
309
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: reschedule task "
drivers/message/fusion/mptsas.c
3194
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
3206
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
321
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: kfree (fw_event=0x%p)\n",
drivers/message/fusion/mptsas.c
3268
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
3277
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
3297
printk(KERN_INFO "Device returned, unsetting inDMD\n");
drivers/message/fusion/mptsas.c
3468
printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
drivers/message/fusion/mptsas.c
354
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
3603
printk(MYIOC_s_INFO_FMT "delete expander: num_phys %d, "
drivers/message/fusion/mptsas.c
3681
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
3693
printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
drivers/message/fusion/mptsas.c
3762
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
3780
printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
3810
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
3840
printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
3858
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
3949
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
3961
printk(MYIOC_s_INFO_FMT "add expander: num_phys %d, "
drivers/message/fusion/mptsas.c
4034
printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, "
drivers/message/fusion/mptsas.c
4344
printk(MYIOC_s_WARN_FMT "firmware bug: unable "
drivers/message/fusion/mptsas.c
4375
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
4387
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
4397
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
4432
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
4449
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
4457
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
4465
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
4491
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
4508
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
4516
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
4524
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
4531
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
4556
printk(MYIOC_s_INFO_FMT "attaching raid volume, channel %d, "
drivers/message/fusion/mptsas.c
4566
printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, "
drivers/message/fusion/mptsas.c
4686
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: "
drivers/message/fusion/mptsas.c
4796
dtmprintk(ioc, printk(MYIOC_s_WARN_FMT "TaskMgmt request: no "
drivers/message/fusion/mptsas.c
4801
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request: mr = %p, "
drivers/message/fusion/mptsas.c
4830
dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
4841
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
4873
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
490
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: [%p]: num_phys=%02d "
drivers/message/fusion/mptsas.c
4930
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
4939
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptsas.c
4968
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Entering %s: "
drivers/message/fusion/mptsas.c
5049
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
5056
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
5060
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
5112
printk(MYIOC_s_WARN_FMT "%s: failed at (line=%d)\n", ioc->name,
drivers/message/fusion/mptsas.c
5141
printk(MYIOC_s_INFO_FMT "removing raid volume, channel %d, "
drivers/message/fusion/mptsas.c
5177
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptsas.c
5185
printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n",
drivers/message/fusion/mptsas.c
519
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "sas_rphy_add: rphy=%p\n",
drivers/message/fusion/mptsas.c
5201
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptsas.c
5209
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptsas.c
526
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "rphy=%p release=%p\n",
drivers/message/fusion/mptsas.c
5265
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
5274
printk(MYIOC_s_INFO_FMT "Invalid value passed for"
drivers/message/fusion/mptsas.c
5280
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
5300
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n",
drivers/message/fusion/mptsas.c
5319
dprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptsas.c
5353
printk(MYIOC_s_INFO_FMT "IOC is in Target mode\n", ioc->name);
drivers/message/fusion/mptsas.c
549
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "port=%p release=%p\n",
drivers/message/fusion/mptsas.c
879
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
901
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "phy_id=%d sas_address=0x%018llX\n",
drivers/message/fusion/mptsas.c
919
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tForming port\n\t\t"
drivers/message/fusion/mptsas.c
936
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
970
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptsas.c
975
dsaswideprintk(ioc, printk(MYIOC_s_DEBUG_FMT "\t\tport = %p rphy=%p\n",
drivers/message/fusion/mptsas.c
978
dsaswideprintk(ioc, printk("\n"));
drivers/message/fusion/mptscsih.c
1158
dprintk(ioc, printk(MYIOC_s_WARN_FMT "Device (%d:%d:%llu) reported QUEUE_FULL!\n",
drivers/message/fusion/mptscsih.c
1194
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
1329
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "qcmd: SCpnt=%p\n",
drivers/message/fusion/mptscsih.c
1339
dprintk(ioc, printk(MYIOC_s_WARN_FMT "QueueCmd, no msg frames!!\n",
drivers/message/fusion/mptscsih.c
139
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "getFreeChainBuffer called\n",
drivers/message/fusion/mptscsih.c
1426
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Issued SCSI cmd (%p) mf=%p idx=%d\n",
drivers/message/fusion/mptscsih.c
1478
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT "FreeChainBuffers (index %d)\n",
drivers/message/fusion/mptscsih.c
151
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
1528
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptscsih.c
1531
printk(MYIOC_s_WARN_FMT "Issuing HardReset from %s!!\n",
drivers/message/fusion/mptscsih.c
1534
printk(MYIOC_s_WARN_FMT "TaskMgmt HardReset "
drivers/message/fusion/mptscsih.c
1546
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptscsih.c
1563
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptscsih.c
1569
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt request (mf=%p)\n",
drivers/message/fusion/mptscsih.c
157
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT "getFreeChainBuffer failed\n",
drivers/message/fusion/mptscsih.c
1593
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "TaskMgmt: ctx2abort (0x%08x) "
drivers/message/fusion/mptscsih.c
1608
dfailprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptscsih.c
1621
dtmprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptscsih.c
1633
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
1641
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptscsih.c
1695
printk(KERN_ERR MYNAM ": task abort: "
drivers/message/fusion/mptscsih.c
1701
printk(MYIOC_s_INFO_FMT "attempting task abort! (sc=%p)\n",
drivers/message/fusion/mptscsih.c
1707
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
1719
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
1730
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
1745
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT "task abort: "
drivers/message/fusion/mptscsih.c
1774
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
1779
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
1786
printk(MYIOC_s_INFO_FMT "task abort: %s (rv=%04x) (sc=%p)\n",
drivers/message/fusion/mptscsih.c
1813
printk(KERN_ERR MYNAM ": lun reset: "
drivers/message/fusion/mptscsih.c
1819
printk(MYIOC_s_INFO_FMT "attempting lun reset! (sc=%p)\n",
drivers/message/fusion/mptscsih.c
1836
printk (MYIOC_s_INFO_FMT "lun reset: %s (sc=%p)\n",
drivers/message/fusion/mptscsih.c
1866
printk(KERN_ERR MYNAM ": bus reset: "
drivers/message/fusion/mptscsih.c
1872
printk(MYIOC_s_INFO_FMT "attempting bus reset! (sc=%p)\n",
drivers/message/fusion/mptscsih.c
1887
printk(MYIOC_s_INFO_FMT "bus reset: %s (sc=%p)\n",
drivers/message/fusion/mptscsih.c
1915
printk(KERN_ERR MYNAM ": host reset: "
drivers/message/fusion/mptscsih.c
1924
printk(MYIOC_s_INFO_FMT "attempting host reset! (sc=%p)\n",
drivers/message/fusion/mptscsih.c
1936
printk(MYIOC_s_INFO_FMT "host reset: %s (sc=%p)\n",
drivers/message/fusion/mptscsih.c
1960
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2025
printk(MYIOC_s_INFO_FMT "Response Code(0x%08x): F/W: %s\n",
drivers/message/fusion/mptscsih.c
2048
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2355
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2359
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2366
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2371
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2377
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2443
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Hmmm... SenseData len=0! (?)\n",
drivers/message/fusion/mptscsih.c
2545
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2549
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2554
dtmprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2574
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2675
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2739
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2783
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
285
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2890
dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: No msg frames!\n",
drivers/message/fusion/mptscsih.c
2931
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2942
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2959
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
2967
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptscsih.c
2979
devtprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: success, rc=0x%02x\n",
drivers/message/fusion/mptscsih.c
301
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "SG: Chain Required! sg done %d\n",
drivers/message/fusion/mptscsih.c
3203
printk(MYIOC_s_INFO_FMT "debug_level=%08xh\n",
drivers/message/fusion/mptscsih.c
335
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT "Chain Buffer Needed, RequestNB=%x sgeOffset=%d\n", ioc->name, RequestNB, sgeOffset));
drivers/message/fusion/mptscsih.c
346
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
368
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Current buff @ %p (index 0x%x)",
drivers/message/fusion/mptscsih.c
377
dsgprintk(ioc, printk(MYIOC_s_DEBUG_FMT " Chain buff @ %p (index 0x%x)\n",
drivers/message/fusion/mptscsih.c
405
dfailprintk(ioc, printk(MYIOC_s_WARN_FMT "%s: no msg frames!!\n",
drivers/message/fusion/mptscsih.c
416
devtverboseprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
537
printk(MYIOC_s_DEBUG_FMT "\tfw_channel = %d, fw_id = %d, lun = %llu\n",
drivers/message/fusion/mptscsih.c
539
printk(MYIOC_s_DEBUG_FMT "\trequest_len = %d, underflow = %d, "
drivers/message/fusion/mptscsih.c
542
printk(MYIOC_s_DEBUG_FMT "\ttag = %d, transfer_count = %d, "
drivers/message/fusion/mptscsih.c
546
printk(MYIOC_s_DEBUG_FMT "\tiocstatus = %s (0x%04x), "
drivers/message/fusion/mptscsih.c
556
printk(MYIOC_s_DEBUG_FMT "\t[sense_key,asc,ascq]: "
drivers/message/fusion/mptscsih.c
565
printk(MYIOC_s_DEBUG_FMT "response_info = %08xh\n",
drivers/message/fusion/mptscsih.c
618
printk(MYIOC_s_ERR_FMT "NULL ScsiCmd ptr!\n",
drivers/message/fusion/mptscsih.c
646
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
650
dmfprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
693
printk(MYIOC_s_NOTE_FMT "[%d:%d:%d:%llu] "
drivers/message/fusion/mptscsih.c
758
printk(KERN_INFO
drivers/message/fusion/mptscsih.c
809
dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
841
printk(KERN_WARNING "Errata"
drivers/message/fusion/mptscsih.c
869
dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
872
dreplyprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptscsih.c
916
printk(KERN_WARNING"Errata"
drivers/message/fusion/mptscsih.c
931
printk(KERN_WARNING
drivers/message/fusion/mptspi.c
1378
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptspi.c
1386
printk(MYIOC_s_WARN_FMT "Skipping because it's disabled!\n",
drivers/message/fusion/mptspi.c
1402
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptspi.c
1411
printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptspi.c
144
printk(MYIOC_s_DEBUG_FMT "Enabling QAS due to "
drivers/message/fusion/mptspi.c
1484
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptspi.c
1505
dprintk(ioc, printk(MYIOC_s_DEBUG_FMT "ScsiLookup @ %p\n",
drivers/message/fusion/mptspi.c
1509
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptspi.c
1525
dprintk(ioc, printk(MYIOC_s_ERR_FMT
drivers/message/fusion/mptspi.c
237
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptspi.c
267
dfailprintk(ioc, printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptspi.c
305
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptspi.c
433
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT
drivers/message/fusion/mptspi.c
473
ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Requested = 0x%08x"
drivers/message/fusion/mptspi.c
498
ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d Read = 0x%08x"
drivers/message/fusion/mptspi.c
631
dfailprintk(hd->ioc, printk(MYIOC_s_WARN_FMT
drivers/message/fusion/mptspi.c
654
ddvprintk(ioc, printk(MYIOC_s_DEBUG_FMT "RAID Volume action=%x channel=%d id=%d\n",
drivers/message/fusion/mptspi.c
662
dfailprintk(ioc, printk(MYIOC_s_DEBUG_FMT "%s: TIMED OUT!\n",
drivers/message/fusion/mptspi.c
667
printk(MYIOC_s_WARN_FMT "Issuing Reset from %s!!\n",
drivers/message/fusion/mptspi.c
730
printk(MYIOC_s_ERR_FMT "sdev_init kmalloc(%zd) FAILED!\n",
drivers/message/fusion/mptspi.c
763
ddvprintk(hd->ioc, printk(MYIOC_s_DEBUG_FMT "id=%d min_period=0x%02x"
drivers/mfd/mcp-sa11x0.c
119
printk(KERN_WARNING "mcp: read timed out\n");
drivers/mfd/mcp-sa11x0.c
92
printk(KERN_WARNING "mcp: write timed out\n");
drivers/mfd/sm501.c
698
printk(KERN_DEBUG "%s[%d] %pR\n",
drivers/mfd/tps65010.c
1011
printk(KERN_ERR "%s: Failed to write chconfig register\n",
drivers/mfd/tps65010.c
1025
printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
drivers/mfd/tps65010.c
795
printk(KERN_ERR "%s: Wrong mode parameter for set_led()\n",
drivers/mfd/tps65010.c
805
printk(KERN_ERR "%s: Failed to write led%i_on register\n",
drivers/mfd/tps65010.c
818
printk(KERN_ERR "%s: Failed to write led%i_per register\n",
drivers/mfd/tps65010.c
896
printk(KERN_ERR "%s: Failed to write vdcdc1 register\n",
drivers/mfd/tps65010.c
929
printk(KERN_ERR "%s: Failed to write vregs1 register\n",
drivers/mfd/tps65010.c
958
printk(KERN_ERR "%s: Failed to write vdcdc2 register\n",
drivers/mfd/twl-core.c
641
printk(KERN_WARNING "Skipping twl internal clock init and "
drivers/mfd/ucb1x00-core.c
512
printk(KERN_WARNING "UCB1x00 ID not found: %04x\n", id);
drivers/mfd/wm8350-core.c
39
printk(KERN_DEBUG); \
drivers/mfd/wm8350-core.c
41
printk(" 0x%4.4x", *src_++); \
drivers/mfd/wm8350-core.c
42
printk("\n"); \
drivers/mfd/wm8350-core.c
50
#define ldbg(format, arg...) printk(format, ## arg)
drivers/misc/altera-stapl/altera.c
2235
printk(KERN_INFO "%s: CRC matched: %04x\n", __func__,
drivers/misc/altera-stapl/altera.c
2239
printk(KERN_ERR "%s: CRC mismatch: expected %04x, "
drivers/misc/altera-stapl/altera.c
2244
printk(KERN_ERR "%s: error: format isn't "
drivers/misc/altera-stapl/altera.c
2248
printk(KERN_ERR "%s: CRC function returned error "
drivers/misc/altera-stapl/altera.c
2421
printk(KERN_INFO "%s: File format is %s ByteCode format\n",
drivers/misc/altera-stapl/altera.c
2426
printk(KERN_INFO "%s: NOTE \"%s\" = \"%s\"\n",
drivers/misc/altera-stapl/altera.c
2431
printk(KERN_INFO "%s: Actions available:\n", __func__);
drivers/misc/altera-stapl/altera.c
2439
printk(KERN_INFO "%s: %s\n",
drivers/misc/altera-stapl/altera.c
2443
printk(KERN_INFO "%s: %s \"%s\"\n",
drivers/misc/altera-stapl/altera.c
2451
printk(KERN_INFO "%s: %s (%s)\n",
drivers/misc/altera-stapl/altera.c
2463
printk(KERN_INFO "\n");
drivers/misc/altera-stapl/altera.c
2474
printk(KERN_ERR "%s: error: no action specified for "
drivers/misc/altera-stapl/altera.c
2478
printk(KERN_ERR "%s: error: action \"%s\""
drivers/misc/altera-stapl/altera.c
2485
printk(KERN_ERR "%s: error %d\n", __func__, exec_result);
drivers/misc/altera-stapl/altera.c
32
printk(KERN_DEBUG args); \
drivers/misc/altera-stapl/altera.c
515
printk("opcode: %02x\n", opcode);
drivers/misc/altera-stapl/altera.c
703
printk(msg_buff, "\n");
drivers/misc/c2port/core.c
988
printk(KERN_INFO "Silicon Labs C2 port support v. " DRIVER_VERSION
drivers/misc/c2port/core.c
993
printk(KERN_ERR "c2port: failed to allocate class\n");
drivers/misc/dummy-irq.c
25
printk(KERN_INFO "dummy-irq: interrupt occurred on IRQ %d\n",
drivers/misc/dummy-irq.c
36
printk(KERN_ERR "dummy-irq: no IRQ given. Use irq=N\n");
drivers/misc/dummy-irq.c
40
printk(KERN_ERR "dummy-irq: cannot register IRQ %d\n", irq);
drivers/misc/dummy-irq.c
43
printk(KERN_INFO "dummy-irq: registered for IRQ %d\n", irq);
drivers/misc/dummy-irq.c
49
printk(KERN_INFO "dummy-irq unloaded\n");
drivers/misc/eeprom/eeprom_93cx6.c
376
printk(KERN_ERR "%s: timeout\n", __func__);
drivers/misc/ibmasm/ibmasm.h
31
#define err(msg) printk(KERN_ERR "%s: " msg "\n", DRIVER_NAME)
drivers/misc/ibmasm/ibmasm.h
32
#define info(msg) printk(KERN_INFO "%s: " msg "\n", DRIVER_NAME)
drivers/misc/ibmasm/ibmasm.h
38
printk(KERN_DEBUG STR , ##ARGS); \
drivers/misc/ibmasm/remote.c
253
printk(KERN_INFO "ibmasm remote responding to events on RSA card %d\n", sp->number);
drivers/misc/kgdbts.c
103
printk(KERN_INFO a); \
drivers/misc/kgdbts.c
1046
printk(KERN_INFO "kgdbts:RUN kernel_clone for %i breakpoints\n",
drivers/misc/kgdbts.c
1059
printk(KERN_INFO "kgdbts:RUN sys_open for %i breakpoints\n",
drivers/misc/kgdbts.c
107
printk(KERN_INFO a); \
drivers/misc/kgdbts.c
1073
printk(KERN_ERR "kgdbts: config string too long\n");
drivers/misc/kgdbts.c
112
printk(KERN_ERR a); \
drivers/misc/kgdbts.c
1141
printk(KERN_ERR "kgdbts: config string too long\n");
drivers/misc/kgdbts.c
1152
printk(KERN_ERR "kgdbts: ERROR: Already configured and running.\n");
drivers/misc/kgdbts.c
854
printk(KERN_CRIT "kgdbts: ERROR kgdb corrupted memory\n");
drivers/misc/lis3lv02d/lis3lv02d_i2c.c
76
printk(KERN_ERR "lis3: power on failure\n");
drivers/misc/phantom.c
184
printk(KERN_ERR "phantom: you need to set NOT_OH "
drivers/misc/phantom.c
510
printk(KERN_ERR "phantom: can't register phantom class\n");
drivers/misc/phantom.c
515
printk(KERN_ERR "phantom: can't create sysfs version file\n");
drivers/misc/phantom.c
521
printk(KERN_ERR "phantom: can't register character device\n");
drivers/misc/phantom.c
528
printk(KERN_ERR "phantom: can't register pci driver\n");
drivers/misc/phantom.c
532
printk(KERN_INFO "Phantom Linux Driver, version " PHANTOM_VERSION ", "
drivers/misc/sgi-gru/grufile.c
353
printk(KERN_ERR "%s: uv_setup_irq failed, errno=%d\n",
drivers/misc/sgi-gru/grufile.c
361
printk(KERN_ERR "%s: request_irq failed, errno=%d\n",
drivers/misc/sgi-gru/grufile.c
453
printk(KERN_INFO "GRU space: 0x%lx - 0x%lx\n",
drivers/misc/sgi-gru/grufile.c
457
printk(KERN_ERR "%s: misc_register failed\n",
drivers/misc/sgi-gru/grufile.c
464
printk(KERN_ERR "%s: proc init failed\n", GRU_DRIVER_ID_STR);
drivers/misc/sgi-gru/grufile.c
470
printk(KERN_ERR "%s: init tables failed\n", GRU_DRIVER_ID_STR);
drivers/misc/sgi-gru/grufile.c
480
printk(KERN_INFO "%s: v%s\n", GRU_DRIVER_ID_STR,
drivers/misc/sgi-gru/grukservices.c
1017
printk(KERN_DEBUG "GRU:%d quicktest1: unexpected status %d, i %d\n",
drivers/misc/sgi-gru/grukservices.c
1029
printk(KERN_DEBUG "GRU:%d quicktest2: bad message, i %d, m %p, m8 %d\n",
drivers/misc/sgi-gru/grukservices.c
1081
printk(KERN_DEBUG "GRU:%d quicktest2: cb %d, exception\n", smp_processor_id(), i);
drivers/misc/sgi-gru/grukservices.c
1085
printk(KERN_DEBUG "GRU:%d quicktest2:cb %d, buf 0x%lx, 0x%lx, 0x%lx, 0x%lx\n",
drivers/misc/sgi-gru/grukservices.c
1112
printk(KERN_DEBUG "GRU:%d quicktest3 error\n", smp_processor_id());
drivers/misc/sgi-gru/grukservices.c
964
printk(KERN_DEBUG "GRU:%d quicktest0: CBR failure 1\n", smp_processor_id());
drivers/misc/sgi-gru/grukservices.c
969
printk(KERN_DEBUG "GRU:%d quicktest0 bad magic 0x%lx\n", smp_processor_id(), *p);
drivers/misc/sgi-gru/grukservices.c
974
printk(KERN_DEBUG "GRU:%d quicktest0: CBR failure 2\n", smp_processor_id());
drivers/misc/sgi-gru/grukservices.c
979
printk(KERN_DEBUG
drivers/misc/sgi-gru/grutables.h
274
printk(KERN_DEBUG "GRU:%d %s: " fmt, smp_processor_id(), __func__, x);\
drivers/misc/tifm_7xx1.c
162
printk(KERN_INFO
drivers/misc/tifm_core.c
270
printk(KERN_INFO DRIVER_NAME
drivers/mmc/host/wbsd.c
1707
printk(" id %x", (int)host->chip_id);
drivers/mmc/host/wbsd.c
1708
printk(" at 0x%x irq %d", (int)host->base, (int)host->irq);
drivers/mmc/host/wbsd.c
1710
printk(" dma %d", (int)host->dma);
drivers/mmc/host/wbsd.c
1712
printk(" FIFO");
drivers/mmc/host/wbsd.c
1714
printk(" PnP");
drivers/mmc/host/wbsd.c
1715
printk("\n");
drivers/mtd/chips/cfi_cmdset_0001.c
1102
printk(KERN_ERR "%s: put_chip() called with oldstate %d!!\n", map->name, chip->oldstate);
drivers/mtd/chips/cfi_cmdset_0001.c
124
printk(" Extended Query version %c.%c\n", extp->MajorVersion, extp->MinorVersion);
drivers/mtd/chips/cfi_cmdset_0001.c
125
printk(" Feature/Command Support: %4.4X\n", extp->FeatureSupport);
drivers/mtd/chips/cfi_cmdset_0001.c
126
printk(" - Chip Erase: %s\n", extp->FeatureSupport&1?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0001.c
127
printk(" - Suspend Erase: %s\n", extp->FeatureSupport&2?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0001.c
128
printk(" - Suspend Program: %s\n", extp->FeatureSupport&4?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0001.c
129
printk(" - Legacy Lock/Unlock: %s\n", extp->FeatureSupport&8?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0001.c
130
printk(" - Queued Erase: %s\n", extp->FeatureSupport&16?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0001.c
131
printk(" - Instant block lock: %s\n", extp->FeatureSupport&32?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0001.c
132
printk(" - Protection Bits: %s\n", extp->FeatureSupport&64?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0001.c
133
printk(" - Page-mode read: %s\n", extp->FeatureSupport&128?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0001.c
134
printk(" - Synchronous read: %s\n", extp->FeatureSupport&256?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0001.c
135
printk(" - Simultaneous operations: %s\n", extp->FeatureSupport&512?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0001.c
136
printk(" - Extended Flash Array: %s\n", extp->FeatureSupport&1024?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0001.c
139
printk(" - Unknown Bit %X: supported\n", i);
drivers/mtd/chips/cfi_cmdset_0001.c
142
printk(" Supported functions after Suspend: %2.2X\n", extp->SuspendCmdSupport);
drivers/mtd/chips/cfi_cmdset_0001.c
143
printk(" - Program after Erase Suspend: %s\n", extp->SuspendCmdSupport&1?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0001.c
146
printk(" - Unknown Bit %X: supported\n", i);
drivers/mtd/chips/cfi_cmdset_0001.c
1481
printk(KERN_ERR "%s: Error: unpoint called on non pointed region\n", map->name);
drivers/mtd/chips/cfi_cmdset_0001.c
149
printk(" Block Status Register Mask: %4.4X\n", extp->BlkStatusRegMask);
drivers/mtd/chips/cfi_cmdset_0001.c
150
printk(" - Lock Bit Active: %s\n", extp->BlkStatusRegMask&1?"yes":"no");
drivers/mtd/chips/cfi_cmdset_0001.c
151
printk(" - Lock-Down Bit Active: %s\n", extp->BlkStatusRegMask&2?"yes":"no");
drivers/mtd/chips/cfi_cmdset_0001.c
154
printk(" - Unknown Bit %X Active: yes\n",i);
drivers/mtd/chips/cfi_cmdset_0001.c
156
printk(" - EFA Lock Bit: %s\n", extp->BlkStatusRegMask&16?"yes":"no");
drivers/mtd/chips/cfi_cmdset_0001.c
157
printk(" - EFA Lock-Down Bit: %s\n", extp->BlkStatusRegMask&32?"yes":"no");
drivers/mtd/chips/cfi_cmdset_0001.c
160
printk(" - Unknown Bit %X Active: yes\n",i);
drivers/mtd/chips/cfi_cmdset_0001.c
1605
printk(KERN_ERR "%s: word write error (status timeout)\n", map->name);
drivers/mtd/chips/cfi_cmdset_0001.c
1622
printk(KERN_ERR "%s: word write error (bad VPP)\n", map->name);
drivers/mtd/chips/cfi_cmdset_0001.c
1625
printk(KERN_ERR "%s: word write error (status 0x%lx)\n", map->name, chipstatus);
drivers/mtd/chips/cfi_cmdset_0001.c
163
printk(" Vcc Logic Supply Optimum Program/Erase Voltage: %d.%d V\n",
drivers/mtd/chips/cfi_cmdset_0001.c
166
printk(" Vpp Programming Supply Optimum Program/Erase Voltage: %d.%d V\n",
drivers/mtd/chips/cfi_cmdset_0001.c
1768
printk(KERN_WARNING "SR.4 or SR.5 bits set in buffer write (status %lx). Clearing.\n", status.x[0]);
drivers/mtd/chips/cfi_cmdset_0001.c
1786
printk(KERN_ERR "%s: Chip not ready for buffer write. Xstatus = %lx, status = %lx\n",
drivers/mtd/chips/cfi_cmdset_0001.c
1851
printk(KERN_ERR "%s: buffer write error (status timeout)\n", map->name);
drivers/mtd/chips/cfi_cmdset_0001.c
1868
printk(KERN_ERR "%s: buffer write error (bad VPP)\n", map->name);
drivers/mtd/chips/cfi_cmdset_0001.c
1871
printk(KERN_ERR "%s: buffer write error (status 0x%lx)\n", map->name, chipstatus);
drivers/mtd/chips/cfi_cmdset_0001.c
188
printk(KERN_ERR "atmel Features: %02x\n", atmel_pri.Features);
drivers/mtd/chips/cfi_cmdset_0001.c
1989
printk(KERN_ERR "%s: block erase error: (status timeout)\n", map->name);
drivers/mtd/chips/cfi_cmdset_0001.c
2008
printk(KERN_ERR "%s: block erase error: (bad command sequence, status 0x%lx)\n", map->name, chipstatus);
drivers/mtd/chips/cfi_cmdset_0001.c
2015
printk(KERN_ERR "%s: block erase error: (bad VPP)\n", map->name);
drivers/mtd/chips/cfi_cmdset_0001.c
2018
printk(KERN_DEBUG "block erase failed at 0x%08lx: status 0x%lx. Retrying...\n", adr, chipstatus);
drivers/mtd/chips/cfi_cmdset_0001.c
2024
printk(KERN_ERR "%s: block erase failed at 0x%08lx (status 0x%lx)\n", map->name, adr, chipstatus);
drivers/mtd/chips/cfi_cmdset_0001.c
2108
printk(KERN_DEBUG "block status register for 0x%08lx is %x\n",
drivers/mtd/chips/cfi_cmdset_0001.c
2166
printk(KERN_ERR "%s: block unlock error: (status timeout)\n", map->name);
drivers/mtd/chips/cfi_cmdset_0001.c
2182
printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
drivers/mtd/chips/cfi_cmdset_0001.c
2192
printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
drivers/mtd/chips/cfi_cmdset_0001.c
2206
printk(KERN_DEBUG "%s: lock status before, ofs=0x%08llx, len=0x%08X\n",
drivers/mtd/chips/cfi_cmdset_0001.c
2216
printk(KERN_DEBUG "%s: lock status after, ret=%d\n",
drivers/mtd/chips/cfi_cmdset_0001.c
230
printk(KERN_WARNING "cfi_cmdset_0001: Suspend "
drivers/mtd/chips/cfi_cmdset_0001.c
245
printk(KERN_WARNING "cfi_cmdset_0001: write suspend disabled\n");
drivers/mtd/chips/cfi_cmdset_0001.c
2555
printk(KERN_NOTICE "Flash device refused suspend due to pending operation (oldstate %d)\n", chip->oldstate);
drivers/mtd/chips/cfi_cmdset_0001.c
2564
printk(KERN_NOTICE "Flash device refused suspend due to active operation (state %d)\n", chip->state);
drivers/mtd/chips/cfi_cmdset_0001.c
288
printk(KERN_INFO "Reset Partition Config. Register: 1 Partition of 4 planes\n");
drivers/mtd/chips/cfi_cmdset_0001.c
294
printk(KERN_INFO "cfi_cmdset_0001: Simultaneous Operations disabled\n");
drivers/mtd/chips/cfi_cmdset_0001.c
313
printk(KERN_INFO "Using buffer write method\n" );
drivers/mtd/chips/cfi_cmdset_0001.c
329
printk(KERN_INFO "Using auto-unlock on power-up/resume\n" );
drivers/mtd/chips/cfi_cmdset_0001.c
409
printk(KERN_ERR " Unknown Intel/Sharp Extended Query "
drivers/mtd/chips/cfi_cmdset_0001.c
486
printk(KERN_ERR
drivers/mtd/chips/cfi_cmdset_0001.c
553
printk(KERN_NOTICE "cfi_cmdset_0001: Erase suspend on write enabled\n");
drivers/mtd/chips/cfi_cmdset_0001.c
656
printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize);
drivers/mtd/chips/cfi_cmdset_0001.c
661
printk(KERN_DEBUG "erase region %d: offset=0x%llx,size=0x%x,blocks=%d\n",
drivers/mtd/chips/cfi_cmdset_0001.c
758
printk(KERN_DEBUG "%s: program region size/ctrl_valid/ctrl_inval = %d/%d/%d\n",
drivers/mtd/chips/cfi_cmdset_0001.c
772
printk( KERN_ERR
drivers/mtd/chips/cfi_cmdset_0001.c
807
printk(KERN_DEBUG "%s: %d set(s) of %d interleaved chips "
drivers/mtd/chips/cfi_cmdset_0001.c
898
printk(KERN_ERR "%s: Chip not ready after erase "
drivers/mtd/chips/cfi_cmdset_0002.c
1003
printk(KERN_ERR "MTD: put_chip() called with oldstate %d!!\n", chip->oldstate);
drivers/mtd/chips/cfi_cmdset_0002.c
1696
printk(KERN_WARNING "MTD %s(): software timeout\n", __func__);
drivers/mtd/chips/cfi_cmdset_0002.c
184
printk(" Silicon revision: %d\n", extp->SiliconRevision >> 1);
drivers/mtd/chips/cfi_cmdset_0002.c
185
printk(" Address sensitive unlock: %s\n",
drivers/mtd/chips/cfi_cmdset_0002.c
189
printk(" Erase Suspend: %s\n", erase_suspend[extp->EraseSuspend]);
drivers/mtd/chips/cfi_cmdset_0002.c
191
printk(" Erase Suspend: Unknown value %d\n", extp->EraseSuspend);
drivers/mtd/chips/cfi_cmdset_0002.c
194
printk(" Block protection: Not supported\n");
drivers/mtd/chips/cfi_cmdset_0002.c
196
printk(" Block protection: %d sectors per group\n", extp->BlkProt);
drivers/mtd/chips/cfi_cmdset_0002.c
199
printk(" Temporary block unprotect: %s\n",
drivers/mtd/chips/cfi_cmdset_0002.c
201
printk(" Block protect/unprotect scheme: %d\n", extp->BlkProtUnprot);
drivers/mtd/chips/cfi_cmdset_0002.c
202
printk(" Number of simultaneous operations: %d\n", extp->SimultaneousOps);
drivers/mtd/chips/cfi_cmdset_0002.c
203
printk(" Burst mode: %s\n",
drivers/mtd/chips/cfi_cmdset_0002.c
206
printk(" Page mode: Not supported\n");
drivers/mtd/chips/cfi_cmdset_0002.c
208
printk(" Page mode: %d word page\n", extp->PageMode << 2);
drivers/mtd/chips/cfi_cmdset_0002.c
210
printk(" Vpp Supply Minimum Program/Erase Voltage: %d.%d V\n",
drivers/mtd/chips/cfi_cmdset_0002.c
212
printk(" Vpp Supply Maximum Program/Erase Voltage: %d.%d V\n",
drivers/mtd/chips/cfi_cmdset_0002.c
216
printk(" Top/Bottom Boot Block: %s\n", top_bottom[extp->TopBottom]);
drivers/mtd/chips/cfi_cmdset_0002.c
218
printk(" Top/Bottom Boot Block: Unknown value %d\n", extp->TopBottom);
drivers/mtd/chips/cfi_cmdset_0002.c
2479
printk(KERN_WARNING "MTD %s(): software timeout\n",
drivers/mtd/chips/cfi_cmdset_0002.c
2579
printk(KERN_WARNING "MTD %s(): software timeout\n",
drivers/mtd/chips/cfi_cmdset_0002.c
260
printk(KERN_WARNING "%s: JEDEC Device ID is 0x%02X. Assuming broken CFI table.\n", map->name, cfi->id);
drivers/mtd/chips/cfi_cmdset_0002.c
2770
printk(KERN_ERR "Waiting for chip to be ready timed out.\n");
drivers/mtd/chips/cfi_cmdset_0002.c
2872
printk(KERN_ERR "Only %d sectors for PPB locking supported!\n",
drivers/mtd/chips/cfi_cmdset_0002.c
3044
printk(KERN_ERR "Argh. Chip not in PM_SUSPENDED state upon resume()\n");
drivers/mtd/chips/cfi_cmdset_0002.c
522
printk(KERN_NOTICE " Fixing Samsung's Amd/Fujitsu"
drivers/mtd/chips/cfi_cmdset_0002.c
659
printk(KERN_ERR " Unknown Amd/Fujitsu Extended Query "
drivers/mtd/chips/cfi_cmdset_0002.c
667
printk(KERN_INFO " Amd/Fujitsu Extended Query version %c.%c.\n",
drivers/mtd/chips/cfi_cmdset_0002.c
685
printk(KERN_INFO " Advanced Sector Protection (PPB Locking) supported\n");
drivers/mtd/chips/cfi_cmdset_0002.c
694
printk(KERN_WARNING "%s: CFI contains unrecognised boot "
drivers/mtd/chips/cfi_cmdset_0002.c
701
printk(KERN_WARNING "%s: Swapping erase regions for top-boot CFI table.\n", map->name);
drivers/mtd/chips/cfi_cmdset_0002.c
774
printk(KERN_NOTICE "number of %s chips: %d\n",
drivers/mtd/chips/cfi_cmdset_0002.c
802
printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize);
drivers/mtd/chips/cfi_cmdset_0002.c
892
printk(KERN_ERR "Waiting for chip to be ready timed out.\n");
drivers/mtd/chips/cfi_cmdset_0002.c
937
printk(KERN_ERR "MTD %s(): chip not ready after erase suspend\n", __func__);
drivers/mtd/chips/cfi_cmdset_0020.c
102
printk(" Vpp Programming Supply Optimum Program/Erase Voltage: %d.%d V\n",
drivers/mtd/chips/cfi_cmdset_0020.c
1061
printk(KERN_ERR "waiting for chip to be ready timed out in lock\n");
drivers/mtd/chips/cfi_cmdset_0020.c
1105
printk(KERN_ERR "waiting for lock to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]);
drivers/mtd/chips/cfi_cmdset_0020.c
1147
printk("before lock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor)));
drivers/mtd/chips/cfi_cmdset_0020.c
1155
printk("after lock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor)));
drivers/mtd/chips/cfi_cmdset_0020.c
1207
printk(KERN_ERR "waiting for chip to be ready timed out in unlock\n");
drivers/mtd/chips/cfi_cmdset_0020.c
1251
printk(KERN_ERR "waiting for unlock to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]);
drivers/mtd/chips/cfi_cmdset_0020.c
1290
printk("before unlock %x: block status register is %x\n",temp_adr,cfi_read_query(map, temp_adr+(2*ofs_factor)));
drivers/mtd/chips/cfi_cmdset_0020.c
1302
printk("after unlock: block status register is %x\n",cfi_read_query(map, adr+(2*ofs_factor)));
drivers/mtd/chips/cfi_cmdset_0020.c
134
printk(KERN_ERR " Unknown ST Microelectronics"
drivers/mtd/chips/cfi_cmdset_0020.c
208
printk(KERN_WARNING "Sum of regions (%lx) != total size of set of interleaved chips (%lx)\n", offset, devsize);
drivers/mtd/chips/cfi_cmdset_0020.c
214
printk(KERN_DEBUG "%d: offset=0x%llx,size=0x%x,blocks=%d\n",
drivers/mtd/chips/cfi_cmdset_0020.c
298
printk(KERN_ERR "Chip not ready after erase "
drivers/mtd/chips/cfi_cmdset_0020.c
337
printk(KERN_ERR "waiting for chip to be ready timed out in read. WSM status = %lx\n", status.x[0]);
drivers/mtd/chips/cfi_cmdset_0020.c
442
printk("%s: chip->state[%d]\n", __func__, chip->state);
drivers/mtd/chips/cfi_cmdset_0020.c
460
printk("%s: 1 status[%x]\n", __func__, map_read(map, cmd_adr));
drivers/mtd/chips/cfi_cmdset_0020.c
470
printk(KERN_ERR "waiting for chip to be ready timed out in buffer write Xstatus = %lx, status = %lx\n",
drivers/mtd/chips/cfi_cmdset_0020.c
512
printk(KERN_ERR "Chip not ready for buffer write. Xstatus = %lx\n", status.x[0]);
drivers/mtd/chips/cfi_cmdset_0020.c
563
printk(KERN_ERR "waiting for chip to be ready timed out in bufwrite\n");
drivers/mtd/chips/cfi_cmdset_0020.c
588
printk("%s: 2 status[%lx]\n", __func__, status.x[0]);
drivers/mtd/chips/cfi_cmdset_0020.c
618
printk("%s: map_bankwidth(map)[%x]\n", __func__, map_bankwidth(map));
drivers/mtd/chips/cfi_cmdset_0020.c
619
printk("%s: chipnum[%x] wbufsize[%x]\n", __func__, chipnum, wbufsize);
drivers/mtd/chips/cfi_cmdset_0020.c
620
printk("%s: ofs[%x] len[%x]\n", __func__, ofs, len);
drivers/mtd/chips/cfi_cmdset_0020.c
69
printk(" Feature/Command Support: %4.4X\n", extp->FeatureSupport);
drivers/mtd/chips/cfi_cmdset_0020.c
70
printk(" - Chip Erase: %s\n", extp->FeatureSupport&1?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0020.c
71
printk(" - Suspend Erase: %s\n", extp->FeatureSupport&2?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0020.c
72
printk(" - Suspend Program: %s\n", extp->FeatureSupport&4?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0020.c
73
printk(" - Legacy Lock/Unlock: %s\n", extp->FeatureSupport&8?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0020.c
74
printk(" - Queued Erase: %s\n", extp->FeatureSupport&16?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0020.c
75
printk(" - Instant block lock: %s\n", extp->FeatureSupport&32?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0020.c
76
printk(" - Protection Bits: %s\n", extp->FeatureSupport&64?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0020.c
764
printk(KERN_ERR "waiting for chip to be ready timed out in erase\n");
drivers/mtd/chips/cfi_cmdset_0020.c
77
printk(" - Page-mode read: %s\n", extp->FeatureSupport&128?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0020.c
78
printk(" - Synchronous read: %s\n", extp->FeatureSupport&256?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0020.c
81
printk(" - Unknown Bit %X: supported\n", i);
drivers/mtd/chips/cfi_cmdset_0020.c
823
printk(KERN_ERR "waiting for erase to complete timed out. Xstatus = %lx, status = %lx.\n", status.x[0], map_read(map, adr).x[0]);
drivers/mtd/chips/cfi_cmdset_0020.c
84
printk(" Supported functions after Suspend: %2.2X\n", extp->SuspendCmdSupport);
drivers/mtd/chips/cfi_cmdset_0020.c
85
printk(" - Program after Erase Suspend: %s\n", extp->SuspendCmdSupport&1?"supported":"unsupported");
drivers/mtd/chips/cfi_cmdset_0020.c
853
printk(KERN_WARNING "Status is not identical for all chips: 0x%lx. Merging to give 0x%02x\n",
drivers/mtd/chips/cfi_cmdset_0020.c
861
printk(KERN_NOTICE "Chip reports improper command sequence: status 0x%x\n", chipstatus);
drivers/mtd/chips/cfi_cmdset_0020.c
868
printk(KERN_WARNING "Chip reports voltage low on erase: status 0x%x\n", chipstatus);
drivers/mtd/chips/cfi_cmdset_0020.c
872
printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x. Retrying...\n", adr, chipstatus);
drivers/mtd/chips/cfi_cmdset_0020.c
878
printk(KERN_DEBUG "Chip erase failed at 0x%08lx: status 0x%x\n", adr, chipstatus);
drivers/mtd/chips/cfi_cmdset_0020.c
88
printk(" - Unknown Bit %X: supported\n", i);
drivers/mtd/chips/cfi_cmdset_0020.c
91
printk(" Block Status Register Mask: %4.4X\n", extp->BlkStatusRegMask);
drivers/mtd/chips/cfi_cmdset_0020.c
92
printk(" - Lock Bit Active: %s\n", extp->BlkStatusRegMask&1?"yes":"no");
drivers/mtd/chips/cfi_cmdset_0020.c
93
printk(" - Valid Bit Active: %s\n", extp->BlkStatusRegMask&2?"yes":"no");
drivers/mtd/chips/cfi_cmdset_0020.c
96
printk(" - Unknown Bit %X Active: yes\n",i);
drivers/mtd/chips/cfi_cmdset_0020.c
99
printk(" Vcc Logic Supply Optimum Program/Erase Voltage: %d.%d V\n",
drivers/mtd/chips/cfi_probe.c
102
printk(KERN_NOTICE
drivers/mtd/chips/cfi_probe.c
108
printk(KERN_NOTICE
drivers/mtd/chips/cfi_probe.c
144
printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
drivers/mtd/chips/cfi_probe.c
156
printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
drivers/mtd/chips/cfi_probe.c
172
printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
drivers/mtd/chips/cfi_probe.c
206
printk("Number of erase regions: %d\n", num_erase_regions);
drivers/mtd/chips/cfi_probe.c
244
printk(" Erase Region #%d: BlockSize 0x%4.4X bytes, %d blocks\n",
drivers/mtd/chips/cfi_probe.c
281
printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank. Manufacturer ID %#08x Chip ID %#08x\n",
drivers/mtd/chips/cfi_probe.c
344
printk("Invalid CFI ident structure.\n");
drivers/mtd/chips/cfi_probe.c
348
printk("Primary Vendor Command Set: %4.4X (%s)\n", cfip->P_ID, vendorname(cfip->P_ID));
drivers/mtd/chips/cfi_probe.c
350
printk("Primary Algorithm Table at %4.4X\n", cfip->P_ADR);
drivers/mtd/chips/cfi_probe.c
352
printk("No Primary Algorithm Table\n");
drivers/mtd/chips/cfi_probe.c
354
printk("Alternative Vendor Command Set: %4.4X (%s)\n", cfip->A_ID, vendorname(cfip->A_ID));
drivers/mtd/chips/cfi_probe.c
356
printk("Alternate Algorithm Table at %4.4X\n", cfip->A_ADR);
drivers/mtd/chips/cfi_probe.c
358
printk("No Alternate Algorithm Table\n");
drivers/mtd/chips/cfi_probe.c
361
printk("Vcc Minimum: %2d.%d V\n", cfip->VccMin >> 4, cfip->VccMin & 0xf);
drivers/mtd/chips/cfi_probe.c
362
printk("Vcc Maximum: %2d.%d V\n", cfip->VccMax >> 4, cfip->VccMax & 0xf);
drivers/mtd/chips/cfi_probe.c
364
printk("Vpp Minimum: %2d.%d V\n", cfip->VppMin >> 4, cfip->VppMin & 0xf);
drivers/mtd/chips/cfi_probe.c
365
printk("Vpp Maximum: %2d.%d V\n", cfip->VppMax >> 4, cfip->VppMax & 0xf);
drivers/mtd/chips/cfi_probe.c
368
printk("No Vpp line\n");
drivers/mtd/chips/cfi_probe.c
370
printk("Typical byte/word write timeout: %d µs\n", 1<<cfip->WordWriteTimeoutTyp);
drivers/mtd/chips/cfi_probe.c
371
printk("Maximum byte/word write timeout: %d µs\n", (1<<cfip->WordWriteTimeoutMax) * (1<<cfip->WordWriteTimeoutTyp));
drivers/mtd/chips/cfi_probe.c
374
printk("Typical full buffer write timeout: %d µs\n", 1<<cfip->BufWriteTimeoutTyp);
drivers/mtd/chips/cfi_probe.c
375
printk("Maximum full buffer write timeout: %d µs\n", (1<<cfip->BufWriteTimeoutMax) * (1<<cfip->BufWriteTimeoutTyp));
drivers/mtd/chips/cfi_probe.c
378
printk("Full buffer write not supported\n");
drivers/mtd/chips/cfi_probe.c
380
printk("Typical block erase timeout: %d ms\n", 1<<cfip->BlockEraseTimeoutTyp);
drivers/mtd/chips/cfi_probe.c
381
printk("Maximum block erase timeout: %d ms\n", (1<<cfip->BlockEraseTimeoutMax) * (1<<cfip->BlockEraseTimeoutTyp));
drivers/mtd/chips/cfi_probe.c
383
printk("Typical chip erase timeout: %d ms\n", 1<<cfip->ChipEraseTimeoutTyp);
drivers/mtd/chips/cfi_probe.c
384
printk("Maximum chip erase timeout: %d ms\n", (1<<cfip->ChipEraseTimeoutMax) * (1<<cfip->ChipEraseTimeoutTyp));
drivers/mtd/chips/cfi_probe.c
387
printk("Chip erase not supported\n");
drivers/mtd/chips/cfi_probe.c
389
printk("Device size: 0x%X bytes (%d MiB)\n", 1 << cfip->DevSize, 1<< (cfip->DevSize - 20));
drivers/mtd/chips/cfi_probe.c
390
printk("Flash Device Interface description: 0x%4.4X\n", cfip->InterfaceDesc);
drivers/mtd/chips/cfi_probe.c
393
printk(" - x8-only asynchronous interface\n");
drivers/mtd/chips/cfi_probe.c
397
printk(" - x16-only asynchronous interface\n");
drivers/mtd/chips/cfi_probe.c
401
printk(" - supports x8 and x16 via BYTE# with asynchronous interface\n");
drivers/mtd/chips/cfi_probe.c
405
printk(" - x32-only asynchronous interface\n");
drivers/mtd/chips/cfi_probe.c
409
printk(" - supports x16 and x32 via Word# with asynchronous interface\n");
drivers/mtd/chips/cfi_probe.c
413
printk(" - Not Allowed / Reserved\n");
drivers/mtd/chips/cfi_probe.c
417
printk(" - Unknown\n");
drivers/mtd/chips/cfi_probe.c
421
printk("Max. bytes in buffer write: 0x%x\n", 1<< cfip->MaxBufWriteSize);
drivers/mtd/chips/cfi_probe.c
422
printk("Number of Erase Block Regions: %d\n", cfip->NumEraseRegions);
drivers/mtd/chips/cfi_util.c
309
printk(KERN_INFO "%s Extended Query Table at 0x%4.4X\n", name, adr);
drivers/mtd/chips/fwh_lock.h
103
printk(KERN_NOTICE "using fwh lock/unlock method\n");
drivers/mtd/chips/gen_probe.c
110
printk(KERN_WARNING "NOR chip too large to fit in mapping. Attempting to cope...\n");
drivers/mtd/chips/gen_probe.c
227
printk(KERN_NOTICE "Support for command set %04X not present\n", type);
drivers/mtd/chips/gen_probe.c
41
printk(KERN_WARNING "Reducing visibility of %ldKiB chip to %ldKiB\n",
drivers/mtd/chips/gen_probe.c
49
printk(KERN_WARNING"gen_probe: No supported Vendor Command Set found\n");
drivers/mtd/chips/gen_probe.c
83
printk(KERN_WARNING "Number of erase regions is zero\n");
drivers/mtd/chips/jedec_probe.c
1984
printk(KERN_INFO "Found: %s\n",jedec_table[index].name);
drivers/mtd/chips/jedec_probe.c
2073
printk(KERN_WARNING
drivers/mtd/chips/jedec_probe.c
2170
printk(KERN_NOTICE
drivers/mtd/chips/jedec_probe.c
2222
printk(KERN_DEBUG "%s: Found different chip or no chip at all (mfr 0x%x, id 0x%x) at 0x%x\n",
drivers/mtd/chips/jedec_probe.c
2245
printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
drivers/mtd/chips/jedec_probe.c
2257
printk(KERN_DEBUG "%s: Found an alias at 0x%x for the chip at 0x%lx\n",
drivers/mtd/chips/jedec_probe.c
2273
printk(KERN_INFO "%s: Found %d x%d devices at 0x%x in %d-bit bank\n",
drivers/mtd/devices/ms02-nv.c
136
printk(KERN_INFO "%s", version);
drivers/mtd/devices/ms02-nv.c
212
printk(KERN_ERR
drivers/mtd/devices/ms02-nv.c
217
printk(KERN_INFO "mtd%d: %s at 0x%08lx, size %zuMiB.\n",
drivers/mtd/devices/pmc551.c
145
printk(KERN_DEBUG "pmc551_erase(pos:%ld, len:%ld)\n", (long)instr->addr,
drivers/mtd/devices/pmc551.c
166
printk(KERN_DEBUG "pmc551_erase() soff_hi: %ld, "
drivers/mtd/devices/pmc551.c
183
printk(KERN_DEBUG "pmc551_erase() done\n");
drivers/mtd/devices/pmc551.c
197
printk(KERN_DEBUG "pmc551_point(%ld, %ld)\n", (long)from, (long)len);
drivers/mtd/devices/pmc551.c
218
printk(KERN_DEBUG "pmc551_unpoint()\n");
drivers/mtd/devices/pmc551.c
234
printk(KERN_DEBUG "pmc551_read(pos:%ld, len:%ld) asize: %ld\n",
drivers/mtd/devices/pmc551.c
255
printk(KERN_DEBUG "pmc551_read() soff_hi: %ld, "
drivers/mtd/devices/pmc551.c
273
printk(KERN_DEBUG "pmc551_read() done\n");
drivers/mtd/devices/pmc551.c
290
printk(KERN_DEBUG "pmc551_write(pos:%ld, len:%ld) asize:%ld\n",
drivers/mtd/devices/pmc551.c
311
printk(KERN_DEBUG "pmc551_write() soff_hi: %ld, "
drivers/mtd/devices/pmc551.c
329
printk(KERN_DEBUG "pmc551_write() done\n");
drivers/mtd/devices/pmc551.c
554
printk(KERN_DEBUG "pmc551: %d%sB (0x%x) of %sprefetchable memory at "
drivers/mtd/devices/pmc551.c
565
printk(KERN_DEBUG "pmc551: DRAM_BLK0 Flags: %s,%s\n"
drivers/mtd/devices/pmc551.c
575
printk(KERN_DEBUG "pmc551: DRAM_BLK1 Flags: %s,%s\n"
drivers/mtd/devices/pmc551.c
585
printk(KERN_DEBUG "pmc551: DRAM_BLK2 Flags: %s,%s\n"
drivers/mtd/devices/pmc551.c
595
printk(KERN_DEBUG "pmc551: DRAM_BLK3 Flags: %s,%s\n"
drivers/mtd/devices/pmc551.c
605
printk(KERN_DEBUG "pmc551: Memory Access %s\n",
drivers/mtd/devices/pmc551.c
607
printk(KERN_DEBUG "pmc551: I/O Access %s\n",
drivers/mtd/devices/pmc551.c
611
printk(KERN_DEBUG "pmc551: Devsel %s\n",
drivers/mtd/devices/pmc551.c
616
printk(KERN_DEBUG "pmc551: %sFast Back-to-Back\n",
drivers/mtd/devices/pmc551.c
620
printk(KERN_DEBUG "pmc551: EEPROM is under %s control\n"
drivers/mtd/devices/pmc551.c
662
printk(KERN_NOTICE "pmc551: Invalid memory size [%d]\n",
drivers/mtd/devices/pmc551.c
671
printk(KERN_NOTICE "pmc551: Invalid aperture size "
drivers/mtd/devices/pmc551.c
677
printk(KERN_INFO PMC551_VERSION);
drivers/mtd/devices/pmc551.c
690
printk(KERN_NOTICE "pmc551: Found PCI V370PDC at 0x%llx\n",
drivers/mtd/devices/pmc551.c
702
printk(KERN_NOTICE "pmc551: Cannot init SDRAM\n");
drivers/mtd/devices/pmc551.c
712
printk(KERN_NOTICE "pmc551: Using specified memory "
drivers/mtd/devices/pmc551.c
731
printk(KERN_NOTICE "pmc551: reducing aperture size to "
drivers/mtd/devices/pmc551.c
735
printk(KERN_NOTICE "pmc551: Using existing aperture "
drivers/mtd/devices/pmc551.c
739
printk(KERN_NOTICE "pmc551: Using specified aperture "
drivers/mtd/devices/pmc551.c
746
printk(KERN_NOTICE "pmc551: Unable to map IO space\n");
drivers/mtd/devices/pmc551.c
752
printk(KERN_DEBUG "pmc551: setting aperture to %d\n",
drivers/mtd/devices/pmc551.c
764
printk(KERN_DEBUG "pmc551: aperture set to %d\n",
drivers/mtd/devices/pmc551.c
782
printk(KERN_NOTICE "pmc551: Failed to register new device\n");
drivers/mtd/devices/pmc551.c
792
printk(KERN_NOTICE "Registered pmc551 memory device.\n");
drivers/mtd/devices/pmc551.c
793
printk(KERN_NOTICE "Mapped %dMiB of memory from 0x%p to 0x%p\n",
drivers/mtd/devices/pmc551.c
796
printk(KERN_NOTICE "Total memory is %d%sB\n",
drivers/mtd/devices/pmc551.c
809
printk(KERN_NOTICE "pmc551: not detected\n");
drivers/mtd/devices/pmc551.c
812
printk(KERN_NOTICE "pmc551: %d pmc551 devices loaded\n", found);
drivers/mtd/devices/pmc551.c
831
printk(KERN_DEBUG "pmc551: unmapping %dMiB starting at "
drivers/mtd/devices/pmc551.c
843
printk(KERN_NOTICE "pmc551: %d pmc551 devices unloaded\n", found);
drivers/mtd/devices/slram.c
52
#define T(fmt, args...) printk(KERN_DEBUG fmt, ## args)
drivers/mtd/devices/slram.c
53
#define E(fmt, args...) printk(KERN_NOTICE fmt, ## args)
drivers/mtd/ftl.c
1010
printk(KERN_WARNING "No memory to scan for FTL on %s\n",
drivers/mtd/ftl.c
1022
printk(KERN_INFO "ftl_cs: opening %d KiB FTL partition\n",
drivers/mtd/ftl.c
174
printk(KERN_NOTICE "ftl_cs: FTL header not found.\n");
drivers/mtd/ftl.c
180
printk(KERN_NOTICE "ftl_cs: FTL header corrupt!\n");
drivers/mtd/ftl.c
184
printk(KERN_NOTICE "ftl: FTL EraseUnitSize %x != MTD erasesize %x\n",
drivers/mtd/ftl.c
235
printk(KERN_NOTICE "ftl_cs: format error: too many "
drivers/mtd/ftl.c
256
printk(KERN_NOTICE "ftl_cs: format error: erase units "
drivers/mtd/ftl.c
457
printk( KERN_WARNING "ftl: Failed to read BAM cache in copy_erase_unit()!\n");
drivers/mtd/ftl.c
471
printk( KERN_WARNING "ftl: Failed to write back to BAM cache in copy_erase_unit()!\n");
drivers/mtd/ftl.c
490
printk(KERN_WARNING "ftl: Error reading old xfer unit in copy_erase_unit\n");
drivers/mtd/ftl.c
498
printk(KERN_WARNING "ftl: Error writing new xfer unit in copy_erase_unit\n");
drivers/mtd/ftl.c
520
printk( KERN_WARNING "ftl: Error writing BAM in copy_erase_unit\n");
drivers/mtd/ftl.c
530
printk(KERN_WARNING "ftl: Error writing new LogicalEUN in copy_erase_unit\n");
drivers/mtd/ftl.c
614
printk(KERN_NOTICE "ftl_cs: reclaim failed: no "
drivers/mtd/ftl.c
644
printk(KERN_NOTICE "ftl_cs: reclaim failed: "
drivers/mtd/ftl.c
657
printk(KERN_NOTICE "ftl_cs: copy_erase_unit failed!\n");
drivers/mtd/ftl.c
675
printk(KERN_DEBUG "ftl_cs: Free total = %d\n", part->FreeTotal);
drivers/mtd/ftl.c
677
printk(KERN_DEBUG "ftl_cs: unit %d: %d phys, %d free, "
drivers/mtd/ftl.c
715
printk(KERN_WARNING"ftl: Error reading BAM in find_free\n");
drivers/mtd/ftl.c
730
printk(KERN_NOTICE "ftl_cs: bad free list!\n");
drivers/mtd/ftl.c
756
printk(KERN_NOTICE "ftl_cs: bad partition\n");
drivers/mtd/ftl.c
763
printk(KERN_NOTICE "ftl_cs: bad read offset\n");
drivers/mtd/ftl.c
776
printk(KERN_WARNING "Error reading MTD device in ftl_read()\n");
drivers/mtd/ftl.c
814
printk(KERN_WARNING"ftl: Error reading old_addr in set_bam_entry: %d\n",ret);
drivers/mtd/ftl.c
824
printk(KERN_NOTICE "ftl_cs: set_bam_entry() inconsistency!\n");
drivers/mtd/ftl.c
825
printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, old = 0x%x"
drivers/mtd/ftl.c
837
printk(KERN_NOTICE "ftl_cs: set_bam_entry() "
drivers/mtd/ftl.c
839
printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, cache"
drivers/mtd/ftl.c
852
printk(KERN_NOTICE "ftl_cs: set_bam_entry() failed!\n");
drivers/mtd/ftl.c
853
printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, new = 0x%x\n",
drivers/mtd/ftl.c
870
printk(KERN_NOTICE "ftl_cs: bad partition\n");
drivers/mtd/ftl.c
885
printk(KERN_NOTICE "ftl_cs: bad write offset\n");
drivers/mtd/ftl.c
894
printk(KERN_NOTICE "ftl_cs: internal error: "
drivers/mtd/ftl.c
911
printk(KERN_NOTICE "ftl_cs: block write failed!\n");
drivers/mtd/ftl.c
912
printk(KERN_NOTICE "ftl_cs: log_addr = 0x%x, virt_addr"
drivers/mtd/inftlcore.c
112
printk(KERN_INFO "INFTL: Found new inftl%c\n", inftl->mbd.devnum + 'a');
drivers/mtd/inftlcore.c
227
printk(KERN_WARNING "INFTL: no free blocks found! "
drivers/mtd/inftlcore.c
256
printk(KERN_WARNING "INFTL: trying to fold non-existent "
drivers/mtd/inftlcore.c
290
printk(KERN_WARNING "INFTL: unknown status "
drivers/mtd/inftlcore.c
298
printk(KERN_WARNING "INFTL: infinite loop in Virtual "
drivers/mtd/inftlcore.c
420
printk(KERN_WARNING "INFTL: endless loop in "
drivers/mtd/inftlcore.c
439
printk(KERN_WARNING "INFTL: no Virtual Unit Chains available "
drivers/mtd/inftlcore.c
47
printk(KERN_ERR
drivers/mtd/inftlcore.c
512
printk(KERN_WARNING "INFTL: infinite loop in "
drivers/mtd/inftlcore.c
556
printk(KERN_WARNING "INFTL: cannot make free "
drivers/mtd/inftlcore.c
618
printk(KERN_WARNING "INFTL: error folding to make room for Virtual "
drivers/mtd/inftlcore.c
644
printk(KERN_WARNING "INFTL: trying to delete non-existent "
drivers/mtd/inftlcore.c
66
printk(KERN_WARNING "INFTL: could not mount device\n");
drivers/mtd/inftlcore.c
677
printk(KERN_WARNING "INFTL: unknown status "
drivers/mtd/inftlcore.c
684
printk(KERN_WARNING "INFTL: infinite loop in Virtual "
drivers/mtd/inftlcore.c
776
printk(KERN_WARNING "INFTL: unknown status for "
drivers/mtd/inftlcore.c
783
printk(KERN_WARNING "INFTL: infinite loop in Virtual "
drivers/mtd/inftlcore.c
827
printk(KERN_WARNING "inftl_writeblock(): cannot find "
drivers/mtd/inftlcore.c
885
printk(KERN_WARNING "INFTL: unknown status for "
drivers/mtd/inftlcore.c
892
printk(KERN_WARNING "INFTL: infinite loop in "
drivers/mtd/inftlcore.c
96
printk(KERN_WARNING "INFTL: cannot calculate a geometry to "
drivers/mtd/inftlcore.c
98
printk(KERN_WARNING "INFTL: using C:%d H:%d S:%d "
drivers/mtd/lpddr/lpddr_cmds.c
144
printk(KERN_ERR "%s: Flash timeout error state %d\n",
drivers/mtd/lpddr/lpddr_cmds.c
188
printk(KERN_WARNING"%s: Bad status on wait: 0x%x\n",
drivers/mtd/lpddr/lpddr_cmds.c
322
printk(KERN_ERR "%s: suspend operation failed."
drivers/mtd/lpddr/lpddr_cmds.c
396
printk(KERN_ERR "%s: put_chip() called with oldstate %d!\n",
drivers/mtd/lpddr/lpddr_cmds.c
470
printk(KERN_WARNING"%s Buffer program error: %d at %lx\n",
drivers/mtd/lpddr/lpddr_cmds.c
498
printk(KERN_WARNING"%s Erase block error %d at : %llx\n",
drivers/mtd/lpddr/lpddr_cmds.c
613
printk(KERN_WARNING "%s: Warning: unpoint called on non"
drivers/mtd/lpddr/lpddr_cmds.c
738
printk(KERN_ERR "%s: block unlock error status %d\n",
drivers/mtd/lpddr/qinfo_probe.c
115
printk(KERN_WARNING"%s: PFOW string at 0x%lx is not found\n",
drivers/mtd/lpddr/qinfo_probe.c
153
printk(KERN_NOTICE"%s Probe at base (0x%08lx) past the end of"
drivers/mtd/lpddr/qinfo_probe.c
197
printk(KERN_WARNING "Reducing visibility of %ldKiB chip"
drivers/mtd/lpddr/qinfo_probe.c
58
printk(KERN_ERR"%s qinfo id string is wrong!\n", map->name);
drivers/mtd/maps/amd76xrom.c
152
printk(KERN_ERR MOD_NAME
drivers/mtd/maps/amd76xrom.c
168
printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
drivers/mtd/maps/amd76xrom.c
232
printk(KERN_WARNING MOD_NAME
drivers/mtd/maps/amd76xrom.c
248
printk(KERN_ERR MOD_NAME
drivers/mtd/maps/cfi_flagadm.c
101
printk("Failed to ioremap\n");
drivers/mtd/maps/cfi_flagadm.c
111
printk(KERN_NOTICE "FlagaDM flash device initialized\n");
drivers/mtd/maps/cfi_flagadm.c
93
printk(KERN_NOTICE "FlagaDM flash device: %x at %x\n",
drivers/mtd/maps/ck804xrom.c
181
printk(KERN_ERR MOD_NAME
drivers/mtd/maps/ck804xrom.c
196
printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
drivers/mtd/maps/ck804xrom.c
262
printk(KERN_WARNING MOD_NAME
drivers/mtd/maps/ck804xrom.c
278
printk(KERN_ERR MOD_NAME
drivers/mtd/maps/dc21285.c
172
printk (KERN_ERR "DC21285 flash: undefined bankwidth\n");
drivers/mtd/maps/dc21285.c
175
printk (KERN_NOTICE "DC21285 flash support (%d-bit bankwidth)\n",
drivers/mtd/maps/dc21285.c
181
printk("Failed to ioremap\n");
drivers/mtd/maps/esb2rom.c
189
printk(KERN_DEBUG "pci_read_config_word : %x\n", word);
drivers/mtd/maps/esb2rom.c
217
printk(KERN_ERR MOD_NAME ": Rom window is closed\n");
drivers/mtd/maps/esb2rom.c
231
printk(KERN_ERR MOD_NAME ": firmware access control, I can't enable writes\n");
drivers/mtd/maps/esb2rom.c
246
printk(KERN_DEBUG MOD_NAME ": "
drivers/mtd/maps/esb2rom.c
254
printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
drivers/mtd/maps/esb2rom.c
324
printk(KERN_WARNING MOD_NAME
drivers/mtd/maps/esb2rom.c
340
printk(KERN_ERR MOD_NAME
drivers/mtd/maps/esb2rom.c
416
printk(KERN_DEBUG "device id = %x\n", id->device);
drivers/mtd/maps/esb2rom.c
419
printk(KERN_DEBUG "matched device = %x\n", id->device);
drivers/mtd/maps/esb2rom.c
424
printk(KERN_DEBUG "matched device id %x\n", id->device);
drivers/mtd/maps/esb2rom.c
427
printk(KERN_DEBUG "retVal = %d\n", retVal);
drivers/mtd/maps/ichxrom.c
154
printk(KERN_ERR MOD_NAME ": Rom window is closed\n");
drivers/mtd/maps/ichxrom.c
166
printk(KERN_ERR MOD_NAME ": firmware access control, I can't enable writes\n");
drivers/mtd/maps/ichxrom.c
181
printk(KERN_DEBUG MOD_NAME ": "
drivers/mtd/maps/ichxrom.c
189
printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n",
drivers/mtd/maps/ichxrom.c
259
printk(KERN_WARNING MOD_NAME
drivers/mtd/maps/ichxrom.c
275
printk(KERN_ERR MOD_NAME
drivers/mtd/maps/l440gx.c
115
printk(KERN_WARNING "Could not allocate pm iobase resource\n");
drivers/mtd/maps/l440gx.c
136
printk(KERN_NOTICE "Enabled WE line to L440GX BIOS flash chip.\n");
drivers/mtd/maps/l440gx.c
140
printk(KERN_NOTICE "JEDEC probe on BIOS chip failed. Using ROM\n");
drivers/mtd/maps/l440gx.c
76
printk(KERN_NOTICE "L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue\n");
drivers/mtd/maps/l440gx.c
84
printk(KERN_WARNING "Failed to ioremap L440GX flash region\n");
drivers/mtd/maps/pci.c
181
printk("%s: enabling expansion ROM\n", pci_name(dev));
drivers/mtd/maps/pcmciamtd.c
24
#define info(format, arg...) printk(KERN_INFO "pcmciamtd: " format "\n" , ## arg)
drivers/mtd/maps/pxa2xx-flash.c
65
printk(KERN_WARNING "Failed to ioremap %s\n",
drivers/mtd/maps/pxa2xx-flash.c
72
printk(KERN_WARNING "Failed to ioremap cached %s\n",
drivers/mtd/maps/pxa2xx-flash.c
77
printk(KERN_NOTICE
drivers/mtd/maps/sa1100-flash.c
122
printk(KERN_INFO "SA1100 flash: CFI device at 0x%08lx, %uMiB, %d-bit\n",
drivers/mtd/maps/sa1100-flash.c
82
printk(KERN_WARNING "SA1100 flash: unknown base address "
drivers/mtd/maps/sbc_gxx.c
185
printk( KERN_ERR"%s: failed to ioremap memory region\n",
drivers/mtd/maps/sbc_gxx.c
191
printk( KERN_ERR"%s: IO ports 0x%x-0x%x in use\n",
drivers/mtd/maps/sbc_gxx.c
199
printk( KERN_INFO"%s: IO:0x%x-0x%x MEM:0x%x-0x%x\n",
drivers/mtd/maps/scb2_flash.c
149
printk(KERN_WARNING MODNAME
drivers/mtd/maps/scb2_flash.c
157
printk(KERN_ERR MODNAME ": Failed to ioremap window!\n");
drivers/mtd/maps/scb2_flash.c
173
printk(KERN_ERR MODNAME ": flash probe failed!\n");
drivers/mtd/maps/scb2_flash.c
190
printk(KERN_NOTICE MODNAME ": chip size 0x%llx at offset 0x%llx\n",
drivers/mtd/maps/scb2_flash.c
81
printk(KERN_ERR MODNAME ": unsupported InterfaceDesc: %#x\n",
drivers/mtd/maps/scx200_docflash.c
126
printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
drivers/mtd/maps/scx200_docflash.c
134
printk(KERN_ERR NAME ": invalid size for flash mapping\n");
drivers/mtd/maps/scx200_docflash.c
139
printk(KERN_ERR NAME ": invalid bus width for flash mapping\n");
drivers/mtd/maps/scx200_docflash.c
147
printk(KERN_ERR NAME ": unable to allocate memory for flash mapping\n");
drivers/mtd/maps/scx200_docflash.c
153
printk(KERN_INFO "DOCCS BASE=0x%08lx, CTRL=0x%08lx\n", (long)docmem.start, (long)ctrl);
drivers/mtd/maps/scx200_docflash.c
167
printk(KERN_INFO NAME ": DOCCS mapped at %pR, width %d\n",
drivers/mtd/maps/scx200_docflash.c
181
printk(KERN_ERR NAME ": failed to ioremap the flash\n");
drivers/mtd/maps/scx200_docflash.c
188
printk(KERN_ERR NAME ": unable to detect flash\n");
drivers/mtd/maps/scx200_docflash.c
195
printk(KERN_WARNING NAME ": warning, flash mapping is smaller than flash size\n");
drivers/mtd/maps/scx200_docflash.c
84
printk(KERN_DEBUG NAME ": NatSemi SCx200 DOCCS Flash Driver\n");
drivers/mtd/maps/solutionengine.c
46
printk(KERN_NOTICE "Probing for flash chips at 0x00000000:\n");
drivers/mtd/maps/solutionengine.c
50
printk(KERN_NOTICE "Probing for flash chips at 0x01000000:\n");
drivers/mtd/maps/solutionengine.c
58
printk(KERN_NOTICE "Flash chips not detected at either possible location.\n");
drivers/mtd/maps/solutionengine.c
62
printk(KERN_NOTICE "Solution Engine: Flash at 0x%pap, EPROM at 0x%pap\n",
drivers/mtd/maps/sun_uflash.c
58
printk(KERN_ERR PFX "Unsupported device at %pOF, 0x%llx\n",
drivers/mtd/maps/sun_uflash.c
82
printk(KERN_ERR PFX "Failed to map device.\n");
drivers/mtd/maps/uclinux.c
103
printk("uclinux[mtd]: failed to find a mapping?\n");
drivers/mtd/maps/uclinux.c
83
printk("uclinux[mtd]: probe address=0x%x size=0x%x\n",
drivers/mtd/maps/uclinux.c
95
printk("uclinux[mtd]: no virtual mapping?\n");
drivers/mtd/mtd_blkdevs.c
485
printk(KERN_WARNING "Unable to register %s block device on major %d: %d\n",
drivers/mtd/mtdblock.c
59
printk (KERN_WARNING "mtdblock: erase of region [0x%lx, 0x%x] "
drivers/mtd/mtdconcat.c
115
printk(KERN_ERR "mtdconcat: Cannot write from panic without panic_write\n");
drivers/mtd/mtdconcat.c
636
printk(KERN_NOTICE "Concatenating MTD devices:\n");
drivers/mtd/mtdconcat.c
638
printk(KERN_NOTICE "(%d): \"%s\"\n", i, subdev[i]->name);
drivers/mtd/mtdconcat.c
639
printk(KERN_NOTICE "into device \"%s\"\n", name);
drivers/mtd/mtdconcat.c
644
printk
drivers/mtd/mtdconcat.c
694
printk("Incompatible device type on \"%s\"\n",
drivers/mtd/mtdconcat.c
706
printk("Incompatible device flags on \"%s\"\n",
drivers/mtd/mtdconcat.c
733
printk("Incompatible OOB or ECC data on \"%s\"\n",
drivers/mtd/mtdconcat.c
814
printk
drivers/mtd/mtdcore.c
791
printk(KERN_WARNING
drivers/mtd/mtdpart.c
105
printk(KERN_NOTICE "Moving partition %d: "
drivers/mtd/mtdpart.c
117
printk(KERN_ERR "mtd partition \"%s\" doesn't have enough space: %#llx < %#llx, disabled\n",
drivers/mtd/mtdpart.c
130
printk(KERN_NOTICE "0x%012llx-0x%012llx : \"%s\"\n",
drivers/mtd/mtdpart.c
142
printk(KERN_ERR"mtd: partition \"%s\" is out of reach -- disabled\n",
drivers/mtd/mtdpart.c
148
printk(KERN_WARNING"mtd: partition \"%s\" extends beyond the end of device \"%s\" -- size truncated to %#llx\n",
drivers/mtd/mtdpart.c
193
printk(KERN_WARNING"mtd: partition \"%s\" doesn't start on an erase/write block boundary -- force read-only\n",
drivers/mtd/mtdpart.c
201
printk(KERN_WARNING"mtd: partition \"%s\" doesn't end on an erase/write block -- force read-only\n",
drivers/mtd/mtdpart.c
244
printk(KERN_WARNING
drivers/mtd/mtdpart.c
411
printk(KERN_NOTICE "Creating %d MTD partitions on \"%s\":\n",
drivers/mtd/mtdpart.c
60
printk(KERN_ERR"memory allocation error while creating partitions for \"%s\"\n",
drivers/mtd/mtdswap.c
1330
printk(KERN_ERR "%s: init failed (%d)\n", MTDSWAP_PREFIX, ret);
drivers/mtd/mtdswap.c
1361
printk(KERN_ERR "%s: Erase size %u not multiple of PAGE_SIZE "
drivers/mtd/mtdswap.c
1367
printk(KERN_ERR "%s: PAGE_SIZE %lu not multiple of write size"
drivers/mtd/mtdswap.c
1373
printk(KERN_ERR "%s: Not enough free bytes in OOB, "
drivers/mtd/mtdswap.c
1386
printk(KERN_WARNING "%s: Device too large. Limiting size to "
drivers/mtd/mtdswap.c
1397
printk(KERN_ERR "%s: Not enough erase blocks. %u available, "
drivers/mtd/mtdswap.c
1414
printk(KERN_INFO "%s: Enabling MTD swap on device %lu, size %llu KB, "
drivers/mtd/nand/onenand/onenand_base.c
1096
printk(KERN_INFO "%s: Attempting to recover from uncorrectable read\n",
drivers/mtd/nand/onenand/onenand_base.c
1136
printk(KERN_ERR "%s: Attempt read beyond end of device\n",
drivers/mtd/nand/onenand/onenand_base.c
1237
printk(KERN_ERR "%s: Attempt read beyond end of device\n",
drivers/mtd/nand/onenand/onenand_base.c
1371
printk(KERN_ERR "%s: Attempted to start read outside oob\n",
drivers/mtd/nand/onenand/onenand_base.c
1395
printk(KERN_ERR "%s: read failed = 0x%x\n",
drivers/mtd/nand/onenand/onenand_base.c
1508
printk(KERN_DEBUG "%s: ecc 0x%04x ctrl 0x%04x "
drivers/mtd/nand/onenand/onenand_base.c
1514
printk(KERN_ERR "%s: read timeout! ctrl 0x%04x "
drivers/mtd/nand/onenand/onenand_base.c
1522
printk(KERN_DEBUG "%s: ctrl 0x%04x intr 0x%04x addr1 %#x "
drivers/mtd/nand/onenand/onenand_base.c
1555
printk(KERN_ERR "%s: Attempt read beyond end of device\n",
drivers/mtd/nand/onenand/onenand_base.c
1725
printk(KERN_ERR "%s: Attempt to write not page aligned data\n",
drivers/mtd/nand/onenand/onenand_base.c
1820
printk(KERN_ERR "%s: Attempt to write not page aligned data\n",
drivers/mtd/nand/onenand/onenand_base.c
1889
printk(KERN_ERR "%s: write failed %d\n",
drivers/mtd/nand/onenand/onenand_base.c
1898
printk(KERN_ERR "%s: verify failed %d\n",
drivers/mtd/nand/onenand/onenand_base.c
1929
printk(KERN_ERR "%s: write failed %d\n",
drivers/mtd/nand/onenand/onenand_base.c
1937
printk(KERN_ERR "%s: verify failed %d\n",
drivers/mtd/nand/onenand/onenand_base.c
2005
printk(KERN_ERR "%s: Attempted to start write outside oob\n",
drivers/mtd/nand/onenand/onenand_base.c
2012
printk(KERN_ERR "%s: Attempt to write past end of page\n",
drivers/mtd/nand/onenand/onenand_base.c
2055
printk(KERN_ERR "%s: write failed %d\n", __func__, ret);
drivers/mtd/nand/onenand/onenand_base.c
2061
printk(KERN_ERR "%s: verify failed %d\n",
drivers/mtd/nand/onenand/onenand_base.c
2143
printk(KERN_ERR "%s: Failed verify, block %d\n",
drivers/mtd/nand/onenand/onenand_base.c
2183
printk(KERN_WARNING "%s: attempt to erase a bad block "
drivers/mtd/nand/onenand/onenand_base.c
2222
printk(KERN_ERR "%s: Failed multiblock erase, "
drivers/mtd/nand/onenand/onenand_base.c
2242
printk(KERN_ERR "%s: Failed erase, block %d\n",
drivers/mtd/nand/onenand/onenand_base.c
2295
printk(KERN_WARNING "%s: attempt to erase a bad block "
drivers/mtd/nand/onenand/onenand_base.c
2308
printk(KERN_ERR "%s: Failed erase, block %d\n",
drivers/mtd/nand/onenand/onenand_base.c
2327
printk(KERN_ERR "%s: Unaligned address\n",
drivers/mtd/nand/onenand/onenand_base.c
2373
printk(KERN_ERR "%s: Unaligned address\n", __func__);
drivers/mtd/nand/onenand/onenand_base.c
2379
printk(KERN_ERR "%s: Length not block aligned\n", __func__);
drivers/mtd/nand/onenand/onenand_base.c
2539
printk(KERN_ERR "%s: wp status = 0x%x\n",
drivers/mtd/nand/onenand/onenand_base.c
2569
printk(KERN_ERR "%s: block = %d, wp status = 0x%x\n",
drivers/mtd/nand/onenand/onenand_base.c
2637
printk(KERN_ERR "%s: block = %d, wp status = 0x%x\n",
drivers/mtd/nand/onenand/onenand_base.c
2852
printk(KERN_ERR "%s: write failed %d\n", __func__, ret);
drivers/mtd/nand/onenand/onenand_base.c
2864
printk(KERN_DEBUG "\nBLOCK\tSTATUS\n");
drivers/mtd/nand/onenand/onenand_base.c
2865
printk(KERN_DEBUG "1st Block\tLOCKED\n");
drivers/mtd/nand/onenand/onenand_base.c
2866
printk(KERN_DEBUG "OTP Block\tLOCKED\n");
drivers/mtd/nand/onenand/onenand_base.c
2868
printk(KERN_DEBUG "\nBLOCK\tSTATUS\n");
drivers/mtd/nand/onenand/onenand_base.c
2869
printk(KERN_DEBUG "1st Block\tLOCKED\n");
drivers/mtd/nand/onenand/onenand_base.c
2870
printk(KERN_DEBUG "OTP Block\tUN-LOCKED\n");
drivers/mtd/nand/onenand/onenand_base.c
2872
printk(KERN_DEBUG "\nBLOCK\tSTATUS\n");
drivers/mtd/nand/onenand/onenand_base.c
2873
printk(KERN_DEBUG "1st Block\tUN-LOCKED\n");
drivers/mtd/nand/onenand/onenand_base.c
2874
printk(KERN_DEBUG "OTP Block\tLOCKED\n");
drivers/mtd/nand/onenand/onenand_base.c
2876
printk(KERN_DEBUG "Reboot to check\n");
drivers/mtd/nand/onenand/onenand_base.c
3235
printk(KERN_DEBUG "[OneNAND] Invalid option selected for OTP\n");
drivers/mtd/nand/onenand/onenand_base.c
3323
printk(KERN_DEBUG "Lock scheme is Continuous Lock\n");
drivers/mtd/nand/onenand/onenand_base.c
3325
printk(KERN_DEBUG "Chip support all block unlock\n");
drivers/mtd/nand/onenand/onenand_base.c
3327
printk(KERN_DEBUG "Chip has 2 plane\n");
drivers/mtd/nand/onenand/onenand_base.c
3329
printk(KERN_DEBUG "Chip has 4KiB pagesize\n");
drivers/mtd/nand/onenand/onenand_base.c
3331
printk(KERN_DEBUG "Chip has cache program feature\n");
drivers/mtd/nand/onenand/onenand_base.c
3350
printk(KERN_INFO "%s%sOneNAND%s %dMB %sV 16-bit (0x%02x)\n",
drivers/mtd/nand/onenand/onenand_base.c
3357
printk(KERN_INFO "OneNAND version = 0x%04x\n", version);
drivers/mtd/nand/onenand/onenand_base.c
3386
printk(KERN_DEBUG "OneNAND Manufacturer: %s (0x%0x)\n", name, manuf);
drivers/mtd/nand/onenand/onenand_base.c
3422
printk(KERN_INFO "Die %d boundary: %d%s\n", die,
drivers/mtd/nand/onenand/onenand_base.c
3487
printk(KERN_INFO "Device has %d eraseregions\n", mtd->numeraseregions);
drivers/mtd/nand/onenand/onenand_base.c
3489
printk(KERN_INFO "[offset: 0x%08x, erasesize: 0x%05x,"
drivers/mtd/nand/onenand/onenand_base.c
3531
printk(KERN_DEBUG "Check blocks from %d to %d\n", start, end);
drivers/mtd/nand/onenand/onenand_base.c
3551
printk(KERN_WARNING "%s: Block %d not erased.\n",
drivers/mtd/nand/onenand/onenand_base.c
3583
printk(KERN_ERR "%s: Invalid boundary value. "
drivers/mtd/nand/onenand/onenand_base.c
3593
printk(KERN_ERR "%s: Please erase blocks "
drivers/mtd/nand/onenand/onenand_base.c
3607
printk(KERN_ERR "%s: boundary locked\n", __func__);
drivers/mtd/nand/onenand/onenand_base.c
3612
printk(KERN_INFO "Changing die %d boundary: %d%s\n",
drivers/mtd/nand/onenand/onenand_base.c
3623
printk(KERN_ERR "%s: Failed PI erase for Die %d\n",
drivers/mtd/nand/onenand/onenand_base.c
3632
printk(KERN_ERR "%s: Failed PI write for Die %d\n",
drivers/mtd/nand/onenand/onenand_base.c
3811
printk(KERN_ERR "%s: resume() called for the chip which is not "
drivers/mtd/nand/onenand/onenand_base.c
3862
printk(KERN_INFO "OneNAND Sync. Burst Read support\n");
drivers/mtd/nand/onenand/onenand_base.c
3925
printk(KERN_WARNING "%s: No OOB scheme defined for oobsize %d\n",
drivers/mtd/nand/onenand/onenand_base.c
586
printk(KERN_ERR "%s: ECC error = 0x%04x\n",
drivers/mtd/nand/onenand/onenand_base.c
591
printk(KERN_DEBUG "%s: correctable ECC error = 0x%04x\n",
drivers/mtd/nand/onenand/onenand_base.c
597
printk(KERN_ERR "%s: read timeout! ctrl=0x%04x intr=0x%04x\n",
drivers/mtd/nand/onenand/onenand_base.c
603
printk(KERN_ERR "%s: mb erase timeout! ctrl=0x%04x intr=0x%04x\n",
drivers/mtd/nand/onenand/onenand_base.c
609
printk(KERN_ERR "%s: timeout! ctrl=0x%04x intr=0x%04x\n",
drivers/mtd/nand/onenand/onenand_base.c
616
printk(KERN_ERR "%s: controller error = 0x%04x\n",
drivers/mtd/nand/onenand/onenand_base.c
619
printk(KERN_ERR "%s: it's locked error.\n", __func__);
drivers/mtd/nand/onenand/onenand_base.c
678
printk(KERN_INFO "OneNAND: There's no interrupt. "
drivers/mtd/nand/onenand/onenand_bbt.c
104
printk(KERN_INFO "OneNAND eraseblock %d is an "
drivers/mtd/nand/onenand/onenand_bbt.c
201
printk(KERN_ERR "onenand_scan_bbt: Can't scan flash and build the RAM-based BBT\n");
drivers/mtd/nand/onenand/onenand_bbt.c
67
printk(KERN_INFO "Scanning device for bad blocks\n");
drivers/mtd/nand/onenand/onenand_omap2.c
131
printk(KERN_ERR "onenand_wait: %s! state %d ctrl 0x%04x intr 0x%04x\n",
drivers/mtd/nand/onenand/onenand_omap2.c
138
printk(KERN_WARNING "onenand_wait: %s! state %d ctrl 0x%04x "
drivers/mtd/nand/onenand/onenand_omap2.c
275
printk(KERN_ERR "onenand_wait: ECC error = "
drivers/mtd/nand/onenand/onenand_omap2.c
281
printk(KERN_NOTICE "onenand_wait: correctable "
drivers/mtd/nand/onenand/onenand_omap2.c
295
printk(KERN_ERR "onenand_wait: "
drivers/mtd/nand/onenand/onenand_samsung.c
171
printk(KERN_INFO "0x%08X: 0x%08x 0x%08x 0x%08x 0x%08x\n",
drivers/mtd/nand/raw/cafe_nand.c
270
printk("About to write command %08x to register 0\n", ctl1);
drivers/mtd/nand/raw/cafe_nand.c
272
printk("Register %x: %08x\n", i, readl(cafe->mmio + i));
drivers/mtd/nand/raw/cafe_nand.c
438
printk("Register %x: %08x\n", i, readl(cafe->mmio + i));
drivers/mtd/nand/raw/diskonchip.c
242
printk("_DoC_WaitReady...\n");
drivers/mtd/nand/raw/diskonchip.c
247
printk("_DoC_WaitReady timed out.\n");
drivers/mtd/nand/raw/diskonchip.c
256
printk("_DoC_WaitReady timed out.\n");
drivers/mtd/nand/raw/diskonchip.c
288
printk("DoC_WaitReady OK\n");
drivers/mtd/nand/raw/diskonchip.c
298
printk("write_byte %02x\n", datum);
drivers/mtd/nand/raw/diskonchip.c
310
printk("writebuf of %d bytes: ", len);
drivers/mtd/nand/raw/diskonchip.c
314
printk("%02x ", buf[i]);
drivers/mtd/nand/raw/diskonchip.c
317
printk("\n");
drivers/mtd/nand/raw/diskonchip.c
328
printk("readbuf of %d bytes: ", len);
drivers/mtd/nand/raw/diskonchip.c
460
printk("writebuf of %d bytes: ", len);
drivers/mtd/nand/raw/diskonchip.c
464
printk("%02x ", buf[i]);
drivers/mtd/nand/raw/diskonchip.c
467
printk("\n");
drivers/mtd/nand/raw/diskonchip.c
477
printk("readbuf of %d bytes: ", len);
drivers/mtd/nand/raw/diskonchip.c
486
printk("%02x ", buf[i]);
drivers/mtd/nand/raw/diskonchip.c
493
printk("%02x ", buf[len - 2]);
drivers/mtd/nand/raw/diskonchip.c
498
printk("%02x ", buf[len - 1]);
drivers/mtd/nand/raw/diskonchip.c
500
printk("\n");
drivers/mtd/nand/raw/nandsim.c
743
printk("flash size: %llu MiB\n",
drivers/mtd/nand/raw/nandsim.c
745
printk("page size: %u bytes\n", ns->geom.pgsz);
drivers/mtd/nand/raw/nandsim.c
746
printk("OOB area size: %u bytes\n", ns->geom.oobsz);
drivers/mtd/nand/raw/nandsim.c
747
printk("sector size: %u KiB\n", ns->geom.secsz >> 10);
drivers/mtd/nand/raw/nandsim.c
748
printk("pages number: %u\n", ns->geom.pgnum);
drivers/mtd/nand/raw/nandsim.c
749
printk("pages per sector: %u\n", ns->geom.pgsec);
drivers/mtd/nand/raw/nandsim.c
750
printk("bus width: %u\n", ns->busw);
drivers/mtd/nand/raw/nandsim.c
751
printk("bits in sector size: %u\n", ns->geom.secshift);
drivers/mtd/nand/raw/nandsim.c
752
printk("bits in page size: %u\n", ns->geom.pgshift);
drivers/mtd/nand/raw/nandsim.c
753
printk("bits in OOB size: %u\n", ffs(ns->geom.oobsz) - 1);
drivers/mtd/nand/raw/nandsim.c
754
printk("flash size with OOB: %llu KiB\n",
drivers/mtd/nand/raw/nandsim.c
756
printk("page address bytes: %u\n", ns->geom.pgaddrbytes);
drivers/mtd/nand/raw/nandsim.c
757
printk("sector address bytes: %u\n", ns->geom.secaddrbytes);
drivers/mtd/nand/raw/nandsim.c
758
printk("options: %#x\n", ns->options);
drivers/mtd/nftlcore.c
105
printk(KERN_INFO "NFTL: Found new nftl%c\n", nftl->mbd.devnum + 'a');
drivers/mtd/nftlcore.c
221
printk("Argh! No free blocks found! LastFreeEUN = %d, "
drivers/mtd/nftlcore.c
242
printk("Error went away on retry.\n");
drivers/mtd/nftlcore.c
270
printk(KERN_WARNING "Trying to fold non-existent "
drivers/mtd/nftlcore.c
312
printk(KERN_WARNING
drivers/mtd/nftlcore.c
321
printk(KERN_WARNING
drivers/mtd/nftlcore.c
330
printk("Unknown status for block %d in EUN %d: %x\n",
drivers/mtd/nftlcore.c
336
printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%x\n",
drivers/mtd/nftlcore.c
390
printk(KERN_WARNING
drivers/mtd/nftlcore.c
491
printk("Endless loop in Virtual Chain %d: Unit %x\n",
drivers/mtd/nftlcore.c
510
printk(KERN_WARNING "No Virtual Unit Chains available for folding. "
drivers/mtd/nftlcore.c
572
printk(KERN_WARNING
drivers/mtd/nftlcore.c
59
printk(KERN_WARNING "NFTL: could not mount device\n");
drivers/mtd/nftlcore.c
617
printk(KERN_WARNING "Cannot make free space.\n");
drivers/mtd/nftlcore.c
667
printk(KERN_WARNING "Error folding to make room for Virtual Unit Chain 0x%x\n",
drivers/mtd/nftlcore.c
684
printk(KERN_WARNING
drivers/mtd/nftlcore.c
736
printk("Unknown status for block %ld in EUN %d: %x\n",
drivers/mtd/nftlcore.c
742
printk(KERN_WARNING "Infinite loop in Virtual Unit Chain 0x%lx\n",
drivers/mtd/nftlcore.c
89
printk(KERN_WARNING "NFTL: cannot calculate a geometry to "
drivers/mtd/nftlcore.c
91
printk(KERN_WARNING "NFTL: using C:%d H:%d S:%d "
drivers/mtd/nftlmount.c
103
printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but ECC read failed (err %d)\n",
drivers/mtd/nftlmount.c
110
printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but went away on reread!\n",
drivers/mtd/nftlmount.c
112
printk(KERN_NOTICE "New data are: %6ph\n", buf);
drivers/mtd/nftlmount.c
122
printk(KERN_NOTICE "NFTL Media Headers at 0x%x and 0x%x disagree.\n",
drivers/mtd/nftlmount.c
151
printk(KERN_NOTICE "NFTL: UnitSizeFactor 0x00 detected. This violates the spec but we think we know what it means...\n");
drivers/mtd/nftlmount.c
153
printk(KERN_NOTICE "Sorry, we don't support UnitSizeFactor 0x%02x\n",
drivers/mtd/nftlmount.c
157
printk(KERN_NOTICE "WARNING: Support for NFTL with UnitSizeFactor 0x%02x is experimental\n",
drivers/mtd/nftlmount.c
165
printk(KERN_NOTICE "NFTL Media Header sanity check failed:\n");
drivers/mtd/nftlmount.c
166
printk(KERN_NOTICE "nb_boot_blocks (%d) + 2 > nb_blocks (%d)\n",
drivers/mtd/nftlmount.c
173
printk(KERN_NOTICE "NFTL Media Header sanity check failed:\n");
drivers/mtd/nftlmount.c
174
printk(KERN_NOTICE "numvunits (%d) > nb_blocks (%d) - nb_boot_blocks(%d) - 2\n",
drivers/mtd/nftlmount.c
224
printk(KERN_NOTICE "Read of bad sector table failed (err %d)\n",
drivers/mtd/nftlmount.c
329
printk("Error while formatting block %d\n", block);
drivers/mtd/nftlmount.c
395
printk("Incorrect free sector %d in block %d: "
drivers/mtd/nftlmount.c
416
printk("incorrect ReplUnitTable[] : %d\n", block);
drivers/mtd/nftlmount.c
432
printk("nftl: length too long %d !\n", length);
drivers/mtd/nftlmount.c
438
printk("incorrect ReplUnitTable[] : %d\n", block);
drivers/mtd/nftlmount.c
459
printk("Formatting chain at block %d\n", first_block);
drivers/mtd/nftlmount.c
464
printk("Formatting block %d\n", block);
drivers/mtd/nftlmount.c
476
printk("incorrect ReplUnitTable[] : %d\n", block);
drivers/mtd/nftlmount.c
575
printk("Could not find valid boot record\n");
drivers/mtd/nftlmount.c
61
printk(KERN_WARNING "Block read at 0x%x of mtd%d failed: %d\n",
drivers/mtd/nftlmount.c
620
printk("Formatting block %d\n", block);
drivers/mtd/nftlmount.c
636
printk("Block %d: free but referenced in chain %d\n",
drivers/mtd/nftlmount.c
64
printk(KERN_WARNING "Further failures for this block will not be printed\n");
drivers/mtd/nftlmount.c
654
printk("Block %d: incorrect logical block: %d expected: %d\n",
drivers/mtd/nftlmount.c
666
printk("Block %d: incorrectly marked as first block in chain\n",
drivers/mtd/nftlmount.c
672
printk("Block %d: folding in progress - ignoring first block flag\n",
drivers/mtd/nftlmount.c
683
printk("Block %d: referencing invalid block %d\n",
drivers/mtd/nftlmount.c
698
printk("Block %d: folding in progress - ignoring first block flag\n",
drivers/mtd/nftlmount.c
703
printk("Block %d: referencing block %d already in another chain\n",
drivers/mtd/nftlmount.c
72
printk(KERN_DEBUG "ANAND header not found at 0x%x in mtd%d\n",
drivers/mtd/nftlmount.c
730
printk("Could read foldmark at block %d\n", first_block);
drivers/mtd/nftlmount.c
744
printk("Two chains at blocks %d (len=%d) and %d (len=%d)\n",
drivers/mtd/nftlmount.c
769
printk("Unreferenced block %d, formatting it\n", block);
drivers/mtd/nftlmount.c
83
printk(KERN_WARNING "ANAND header found at 0x%x in mtd%d, but OOB data read failed (err %d)\n",
drivers/mtd/nftlmount.c
93
printk(KERN_NOTICE "ANAND header found at 0x%x in mtd%d, but erase mark not present (0x%04x,0x%04x instead)\n",
drivers/mtd/parsers/afs.c
108
printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n",
drivers/mtd/parsers/afs.c
147
printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n",
drivers/mtd/parsers/afs.c
184
printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n",
drivers/mtd/parsers/afs.c
209
printk(" mtd: at 0x%08x, %5lluKiB, %8u, %s\n",
drivers/mtd/parsers/afs.c
88
printk(KERN_ERR "AFS: mtd read failed at 0x%x: %d\n",
drivers/mtd/rfd_ftl.c
124
printk(KERN_WARNING PREFIX
drivers/mtd/rfd_ftl.c
132
printk(KERN_WARNING PREFIX
drivers/mtd/rfd_ftl.c
216
printk(KERN_NOTICE PREFIX "no RFD magic found in '%s'\n",
drivers/mtd/rfd_ftl.c
223
printk(KERN_WARNING PREFIX "'%s': no empty erase unit found\n",
drivers/mtd/rfd_ftl.c
257
printk(KERN_WARNING PREFIX "error reading '%s' at "
drivers/mtd/rfd_ftl.c
284
printk(KERN_ERR PREFIX "erase of region %llx,%llx on '%s' "
drivers/mtd/rfd_ftl.c
342
printk(KERN_ERR PREFIX "error reading '%s' at "
drivers/mtd/rfd_ftl.c
382
printk(KERN_ERR PREFIX "'%s': Unable to "
drivers/mtd/rfd_ftl.c
532
printk(KERN_ERR PREFIX "'%s': unable to read header at "
drivers/mtd/rfd_ftl.c
564
printk(KERN_ERR PREFIX "error writing '%s' at "
drivers/mtd/rfd_ftl.c
636
printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n",
drivers/mtd/rfd_ftl.c
655
printk(KERN_ERR PREFIX "error writing '%s' at 0x%lx\n",
drivers/mtd/rfd_ftl.c
764
printk(KERN_WARNING PREFIX "please provide block_size");
drivers/mtd/rfd_ftl.c
777
printk(KERN_WARNING PREFIX "'%s': errors found, "
drivers/mtd/rfd_ftl.c
782
printk(KERN_INFO PREFIX "name: '%s' type: %d flags %x\n",
drivers/mtd/sm_ftl.h
72
printk(KERN_WARNING "sm_ftl" ": " format "\n", ## __VA_ARGS__)
drivers/mtd/sm_ftl.h
76
printk(KERN_DEBUG "sm_ftl" ": " format "\n", ## __VA_ARGS__)
drivers/mtd/sm_ftl.h
80
printk(KERN_DEBUG "sm_ftl" ": " format "\n", ## __VA_ARGS__)
drivers/mtd/ssfdc.c
127
printk(KERN_WARNING
drivers/mtd/ssfdc.c
347
printk(KERN_INFO "SSFDC_RO: Found ssfdc%c on mtd%d (%s)\n",
drivers/mtd/ssfdc.c
440
printk(KERN_INFO "SSFDC read-only Flash Translation layer\n");
drivers/mtd/tests/nandbiterrs.c
332
printk("\n");
drivers/mtd/tests/nandbiterrs.c
333
printk(KERN_INFO "==================================================\n");
drivers/mtd/tests/nandbiterrs.c
395
printk(KERN_INFO "==================================================\n");
drivers/mtd/tests/oobtest.c
344
printk(KERN_INFO "\n");
drivers/mtd/tests/oobtest.c
345
printk(KERN_INFO "=================================================\n");
drivers/mtd/tests/oobtest.c
720
printk(KERN_INFO "=================================================\n");
drivers/mtd/tests/pagetest.c
325
printk(KERN_INFO "\n");
drivers/mtd/tests/pagetest.c
326
printk(KERN_INFO "=================================================\n");
drivers/mtd/tests/pagetest.c
448
printk(KERN_INFO "=================================================\n");
drivers/mtd/tests/readtest.c
108
printk(KERN_CRIT "%s\n", line);
drivers/mtd/tests/readtest.c
118
printk(KERN_INFO "\n");
drivers/mtd/tests/readtest.c
119
printk(KERN_INFO "=================================================\n");
drivers/mtd/tests/readtest.c
202
printk(KERN_INFO "=================================================\n");
drivers/mtd/tests/readtest.c
93
printk(KERN_CRIT "%s\n", line);
drivers/mtd/tests/speedtest.c
179
printk(KERN_INFO "\n");
drivers/mtd/tests/speedtest.c
180
printk(KERN_INFO "=================================================\n");
drivers/mtd/tests/speedtest.c
405
printk(KERN_INFO "=================================================\n");
drivers/mtd/tests/stresstest.c
133
printk(KERN_INFO "\n");
drivers/mtd/tests/stresstest.c
134
printk(KERN_INFO "=================================================\n");
drivers/mtd/tests/stresstest.c
219
printk(KERN_INFO "=================================================\n");
drivers/mtd/tests/subpagetest.c
112
printk("%02x", *p++);
drivers/mtd/tests/subpagetest.c
113
printk("\n");
drivers/mtd/tests/subpagetest.c
274
printk(KERN_INFO "\n");
drivers/mtd/tests/subpagetest.c
275
printk(KERN_INFO "=================================================\n");
drivers/mtd/tests/subpagetest.c
424
printk(KERN_INFO "=================================================\n");
drivers/mtd/tests/torturetest.c
174
printk(KERN_INFO "\n");
drivers/mtd/tests/torturetest.c
175
printk(KERN_INFO "=================================================\n");
drivers/mtd/tests/torturetest.c
350
printk(KERN_INFO "=================================================\n");
drivers/mtd/tests/torturetest.c
400
printk("-------------------------------------------------------"
drivers/mtd/tests/torturetest.c
421
printk("Offset Read Written\n");
drivers/mtd/tests/torturetest.c
423
printk("0x%08x: ", start + i);
drivers/mtd/tests/torturetest.c
426
printk(" %02x", read[start + i + j1]);
drivers/mtd/tests/torturetest.c
432
printk(" ");
drivers/mtd/tests/torturetest.c
436
printk(" %s ", diff);
drivers/mtd/tests/torturetest.c
439
printk(" %02x", written[start + i + j2]);
drivers/mtd/tests/torturetest.c
440
printk("\n");
drivers/net/can/sja1000/ems_pcmcia.c
143
printk(KERN_INFO "%s: removing %s on channel #%d\n",
drivers/net/can/sja1000/ems_pcmcia.c
230
printk(KERN_INFO "%s: registered %s on channel "
drivers/net/ethernet/8390/etherh.c
509
printk(KERN_ERR "%s: unable to read module description string\n",
drivers/net/ethernet/8390/etherh.c
528
printk(KERN_ERR "%s: unable to parse MAC address: %s\n",
drivers/net/ethernet/adaptec/starfire.c
1000
printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n",
drivers/net/ethernet/adaptec/starfire.c
1005
printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n",
drivers/net/ethernet/adaptec/starfire.c
1012
printk(KERN_ERR "starfire: Failed to load firmware \"%s\"\n",
drivers/net/ethernet/adaptec/starfire.c
1017
printk(KERN_ERR "starfire: bogus length %zu in \"%s\"\n",
drivers/net/ethernet/adaptec/starfire.c
1040
printk(KERN_DEBUG "%s: Done netdev_open().\n",
drivers/net/ethernet/adaptec/starfire.c
1066
printk("%s: MII reset failed!\n", dev->name);
drivers/net/ethernet/adaptec/starfire.c
1080
printk(KERN_DEBUG "%s: Link forced to %sMbit %s-duplex\n",
drivers/net/ethernet/adaptec/starfire.c
1095
printk(KERN_WARNING "%s: Transmit timed out, status %#8.8x, "
drivers/net/ethernet/adaptec/starfire.c
1238
printk(KERN_DEBUG "%s: Tx #%d/#%d slot %d status %#8.8x.\n",
drivers/net/ethernet/adaptec/starfire.c
1307
printk(KERN_DEBUG "%s: Interrupt status %#8.8x.\n",
drivers/net/ethernet/adaptec/starfire.c
1329
printk(KERN_INFO
drivers/net/ethernet/adaptec/starfire.c
1343
printk(KERN_DEBUG "%s: Tx Consumer index is %d.\n",
drivers/net/ethernet/adaptec/starfire.c
1348
printk(KERN_DEBUG "%s: Tx completion #%d entry %d is %#8.8x.\n",
drivers/net/ethernet/adaptec/starfire.c
1402
printk(KERN_WARNING "%s: Too much work at interrupt, "
drivers/net/ethernet/adaptec/starfire.c
1410
printk(KERN_DEBUG "%s: exiting interrupt, status=%#8.8x.\n",
drivers/net/ethernet/adaptec/starfire.c
1434
printk(KERN_DEBUG " netdev_rx() status of %d was %#8.8x.\n", np->rx_done, desc_status);
drivers/net/ethernet/adaptec/starfire.c
1438
printk(KERN_DEBUG " netdev_rx() Rx error was %#8.8x.\n", desc_status);
drivers/net/ethernet/adaptec/starfire.c
1455
printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d, quota %d.\n", pkt_len, *quota);
drivers/net/ethernet/adaptec/starfire.c
1481
printk(KERN_DEBUG " Rx data %pM %pM %2.2x%2.2x.\n",
drivers/net/ethernet/adaptec/starfire.c
1490
printk(KERN_DEBUG " netdev_rx() status2 of %d was %#4.4x.\n", np->rx_done, le16_to_cpu(desc->status2));
drivers/net/ethernet/adaptec/starfire.c
1508
printk(KERN_DEBUG "%s: checksum_hw, status2 = %#x\n", dev->name, le16_to_cpu(desc->status2));
drivers/net/ethernet/adaptec/starfire.c
1515
printk(KERN_DEBUG " netdev_rx() vlanid = %d\n",
drivers/net/ethernet/adaptec/starfire.c
1539
printk(KERN_DEBUG " exiting netdev_rx(): %d, status of %d was %#8.8x.\n",
drivers/net/ethernet/adaptec/starfire.c
1568
printk(KERN_DEBUG " exiting netdev_poll(): %d.\n",
drivers/net/ethernet/adaptec/starfire.c
1654
printk(KERN_DEBUG "%s: Link is up, running at %sMbit %s-duplex\n",
drivers/net/ethernet/adaptec/starfire.c
1678
printk(KERN_DEBUG "%s: Link is down\n", dev->name);
drivers/net/ethernet/adaptec/starfire.c
1691
printk(KERN_NOTICE "%s: PCI bus congestion, increasing Tx FIFO threshold to %d bytes\n",
drivers/net/ethernet/adaptec/starfire.c
1694
printk(KERN_WARNING "%s: PCI Tx underflow -- adapter is probably malfunctioning\n", dev->name);
drivers/net/ethernet/adaptec/starfire.c
1705
printk(KERN_ERR "%s: Something Wicked happened! %#8.8x.\n",
drivers/net/ethernet/adaptec/starfire.c
1928
printk(KERN_DEBUG "%s: Shutting down ethercard, Intr status %#8.8x.\n",
drivers/net/ethernet/adaptec/starfire.c
1930
printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n",
drivers/net/ethernet/adaptec/starfire.c
1943
printk(KERN_DEBUG" Tx ring at %#llx:\n",
drivers/net/ethernet/adaptec/starfire.c
1946
printk(KERN_DEBUG " #%d desc. %#8.8x %#llx -> %#8.8x.\n",
drivers/net/ethernet/adaptec/starfire.c
1950
printk(KERN_DEBUG " Rx ring at %#llx -> %p:\n",
drivers/net/ethernet/adaptec/starfire.c
1954
printk(KERN_DEBUG " #%d desc. %#llx -> %#8.8x\n",
drivers/net/ethernet/adaptec/starfire.c
2050
printk(KERN_INFO DRV_NAME ": polling (NAPI) enabled\n");
drivers/net/ethernet/adaptec/starfire.c
588
printk("%s: Adding vlanid %d to vlan filter\n", dev->name, vid);
drivers/net/ethernet/adaptec/starfire.c
603
printk("%s: removing vlanid %d from vlan filter\n", dev->name, vid);
drivers/net/ethernet/adaptec/starfire.c
698
printk("%2.2x%s",
drivers/net/ethernet/adaptec/starfire.c
717
printk("%s: chipset reset never completed!\n", dev->name);
drivers/net/ethernet/adaptec/starfire.c
758
printk("Adjusting small_frames down to 512\n");
drivers/net/ethernet/adaptec/starfire.c
775
printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n",
drivers/net/ethernet/adaptec/starfire.c
790
printk("%s: PHY#%d reset never completed!\n", dev->name, phy);
drivers/net/ethernet/adaptec/starfire.c
797
printk(KERN_INFO "%s: MII PHY found at address %d, status "
drivers/net/ethernet/adaptec/starfire.c
811
printk(KERN_INFO "%s: scatter-gather and hardware TCP cksumming %s.\n",
drivers/net/ethernet/adaptec/starfire.c
873
printk(KERN_DEBUG "%s: netdev_open() irq %d.\n",
drivers/net/ethernet/adaptec/starfire.c
941
printk(KERN_DEBUG "%s: Filling in the station address.\n", dev->name);
drivers/net/ethernet/adaptec/starfire.c
975
printk(KERN_DEBUG "%s: Setting the Rx and Tx modes.\n", dev->name);
drivers/net/ethernet/amd/7990.c
105
printk("T%d: @(%02X %04X) len %04X, misc %04X, bits %02X\n", \
drivers/net/ethernet/amd/7990.c
175
printk("TX rings:\n");
drivers/net/ethernet/amd/7990.c
187
printk("%d: 0x%8.8x\n", i, leptr);
drivers/net/ethernet/amd/7990.c
192
printk("RX rings:\n");
drivers/net/ethernet/amd/7990.c
203
printk("%d: 0x%8.8x\n", i, leptr);
drivers/net/ethernet/amd/7990.c
213
printk("RX ptr: %8.8x\n", leptr);
drivers/net/ethernet/amd/7990.c
220
printk("TX ptr: %8.8x\n", leptr);
drivers/net/ethernet/amd/7990.c
242
printk("LANCE unopened after %d ticks, csr0=%4.4x.\n", i, READRDP(lp));
drivers/net/ethernet/amd/7990.c
267
printk("Lance restart=%d\n", status);
drivers/net/ethernet/amd/7990.c
283
printk("[");
drivers/net/ethernet/amd/7990.c
286
printk("%s",
drivers/net/ethernet/amd/7990.c
289
printk("%s",
drivers/net/ethernet/amd/7990.c
292
printk("]");
drivers/net/ethernet/amd/7990.c
388
printk("%s: Carrier Lost, trying %s\n",
drivers/net/ethernet/amd/7990.c
406
printk("%s: Tx: ERR_BUF|ERR_UFL, restarting\n",
drivers/net/ethernet/amd/7990.c
479
printk("%s: Bus master arbitration failure, status %4.4x.\n",
drivers/net/ethernet/amd/7990.c
532
printk("lance_tx_timeout\n");
drivers/net/ethernet/amd/7990.c
563
printk("\n");
drivers/net/ethernet/amd/7990.c
564
printk("%2.2x ", skb->data[i]);
drivers/net/ethernet/amd/7990.c
99
printk("R%d: @(%02X %04X) len %04X, mblen %04X, bits %02X\n", \
drivers/net/ethernet/amd/atarilance.c
1016
printk(KERN_DEBUG "%s: RX pkt type 0x%04x from %pM to %pM "
drivers/net/ethernet/amd/atarilance.c
556
printk( "Lance: request for irq %d failed\n", IRQ_AUTO_5 );
drivers/net/ethernet/amd/atarilance.c
565
printk( "Lance: request for VME interrupt failed\n" );
drivers/net/ethernet/amd/atarilance.c
570
printk( "Lance: request for irq %u failed\n", irq );
drivers/net/ethernet/amd/atarilance.c
576
printk("%s: %s at io %#lx, mem %#lx, irq %d%s, hwaddr ",
drivers/net/ethernet/amd/atarilance.c
603
printk("%pM\n", dev->dev_addr);
drivers/net/ethernet/amd/atarilance.c
605
printk( "%s: Warning: This is a default ethernet address!\n",
drivers/net/ethernet/amd/atarilance.c
607
printk( " Use \"ifconfig hw ether ...\" to set the address.\n" );
drivers/net/ethernet/amd/atarilance.c
803
printk( "%s: TX pkt type 0x%04x from %pM to %pM"
drivers/net/ethernet/amd/atarilance.c
91
printk a; \
drivers/net/ethernet/amd/atarilance.c
95
# define PROBE_PRINT(a) printk a
drivers/net/ethernet/amd/atarilance.c
994
printk( "%s: Runt packet!\n", dev->name );
drivers/net/ethernet/amd/declance.c
1041
printk(version);
drivers/net/ethernet/amd/declance.c
1121
printk(KERN_ERR
drivers/net/ethernet/amd/declance.c
1187
printk(KERN_ERR "%s: declance_init called with unknown type\n",
drivers/net/ethernet/amd/declance.c
1200
printk(KERN_ERR
drivers/net/ethernet/amd/declance.c
1211
printk(KERN_ERR "%s: Something is wrong with the "
drivers/net/ethernet/amd/declance.c
1237
printk("%s: %s, addr = %pM, irq = %d\n",
drivers/net/ethernet/amd/declance.c
1264
printk(KERN_ERR
drivers/net/ethernet/amd/declance.c
1274
printk("%s: registered as %s.\n", name, dev->name);
drivers/net/ethernet/amd/declance.c
479
printk("RX ptr: %8.8x(%8.8x)\n",
drivers/net/ethernet/amd/declance.c
488
printk("TX ptr: %8.8x(%8.8x)\n",
drivers/net/ethernet/amd/declance.c
492
printk("TX rings:\n");
drivers/net/ethernet/amd/declance.c
504
printk("%d: %8.8x(%p)\n",
drivers/net/ethernet/amd/declance.c
510
printk("RX rings:\n");
drivers/net/ethernet/amd/declance.c
521
printk("%d: %8.8x(%p)\n",
drivers/net/ethernet/amd/declance.c
540
printk("LANCE unopened after %d ticks, csr0=%4.4x.\n",
drivers/net/ethernet/amd/declance.c
545
printk("LANCE unopened after %d ticks, csr0=%4.4x.\n",
drivers/net/ethernet/amd/declance.c
569
printk("[");
drivers/net/ethernet/amd/declance.c
572
printk("%s", *lib_ptr(ib, brx_ring[i].rmd1,
drivers/net/ethernet/amd/declance.c
576
printk("%s", *lib_ptr(ib, brx_ring[i].rmd1,
drivers/net/ethernet/amd/declance.c
580
printk("]");
drivers/net/ethernet/amd/declance.c
673
printk("%s: Carrier Lost\n", dev->name);
drivers/net/ethernet/amd/declance.c
688
printk("%s: Tx: ERR_BUF|ERR_UFL, restarting\n",
drivers/net/ethernet/amd/declance.c
767
printk("%s: Memory error, status %04x\n", dev->name, csr0);
drivers/net/ethernet/amd/declance.c
812
printk("%s: Can't get IRQ %d\n", dev->name, dev->irq);
drivers/net/ethernet/amd/declance.c
821
printk("%s: Can't get DMA IRQ %d\n", dev->name,
drivers/net/ethernet/amd/declance.c
894
printk(KERN_ERR "%s: transmit timed out, status %04x, reset\n",
drivers/net/ethernet/amd/hplance.c
105
printk(KERN_INFO "%s: %s; select code %d, addr %pM, irq %d\n",
drivers/net/ethernet/amd/mvme147.c
111
printk("%s: No memory for LANCE buffers\n", dev->name);
drivers/net/ethernet/amd/pcnet32.c
1689
printk(KERN_DEBUG PFX "media set to %sMbit mode\n",
drivers/net/ethernet/amd/pcnet32.c
2469
printk(KERN_DEBUG
drivers/net/ethernet/amd/pcnet32.c
2474
printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ",
drivers/net/ethernet/amd/pcnet32.c
2480
printk("%s %08x %04x %08x %04x", i & 1 ? "" : "\n ",
drivers/net/ethernet/amd/pcnet32.c
2485
printk("\n");
drivers/net/ethernet/amd/sun3lance.c
349
printk(KERN_WARNING "SUN3 Lance couldn't allocate DVMA memory\n");
drivers/net/ethernet/amd/sun3lance.c
363
printk(KERN_WARNING "SUN3 Lance unable to allocate IRQ\n");
drivers/net/ethernet/amd/sun3lance.c
369
printk("%s: SUN3 Lance at io %#lx, mem %#lx, irq %d, hwaddr ",
drivers/net/ethernet/amd/sun3lance.c
386
printk("%pM\n", dev->dev_addr);
drivers/net/ethernet/amd/sun3lance.c
403
printk( version );
drivers/net/ethernet/amd/sun3lance.c
539
printk("Ring data: old_tx %d new_tx %d%s new_rx %d\n",
drivers/net/ethernet/amd/sun3lance.c
544
printk( "rx #%d: base=%04x blen=%04x mlen=%04x\n",
drivers/net/ethernet/amd/sun3lance.c
549
printk("tx #%d: base=%04x len=%04x misc=%04x\n",
drivers/net/ethernet/amd/sun3lance.c
573
printk( "%s: tx queue lock!.\n", dev->name);
drivers/net/ethernet/amd/sun3lance.c
595
printk( "%s: TX pkt %d type 0x%04x"
drivers/net/ethernet/amd/sun3lance.c
702
printk("%s: Tx FIFO error\n",
drivers/net/ethernet/amd/sun3lance.c
795
printk( "%s: Runt packet!\n", dev->name );
drivers/net/ethernet/amd/sun3lance.c
811
printk("%s: RX pkt %d type 0x%04x"
drivers/net/ethernet/amd/sun3lance.c
816
printk(" data %02x %02x %02x %02x %02x %02x %02x %02x "
drivers/net/ethernet/amd/sun3lance.c
825
printk( "%s: RX pkt %d type 0x%04x len %d\n ", dev->name, entry, ((u_short *)data)[6], pkt_len);
drivers/net/ethernet/amd/sun3lance.c
83
printk a; \
drivers/net/ethernet/amd/sunlance.c
1099
printk(KERN_ERR "%s: transmit timed out, status %04x, reset\n",
drivers/net/ethernet/amd/sunlance.c
1323
printk(KERN_ERR "SunLance: Cannot map registers.\n");
drivers/net/ethernet/amd/sunlance.c
1333
printk(KERN_ERR "SunLance: Cannot map "
drivers/net/ethernet/amd/sunlance.c
1344
printk(KERN_ERR "SunLance: ERROR: Rx and Tx rings not on even boundary.\n");
drivers/net/ethernet/amd/sunlance.c
1351
printk(KERN_ERR "SunLance: Cannot map PIO buffer.\n");
drivers/net/ethernet/amd/sunlance.c
1402
printk(KERN_INFO "SunLance: using "
drivers/net/ethernet/amd/sunlance.c
1414
printk(KERN_NOTICE "SunLance: warning: overriding option "
drivers/net/ethernet/amd/sunlance.c
1416
printk(KERN_NOTICE "SunLance: warning: mail any problems "
drivers/net/ethernet/amd/sunlance.c
1457
printk(KERN_ERR "SunLance: Cannot register device.\n");
drivers/net/ethernet/amd/sunlance.c
1463
printk(KERN_INFO "%s: LANCE %pM\n",
drivers/net/ethernet/amd/sunlance.c
482
printk(KERN_ERR "LANCE unopened after %d ticks, csr0=%4.4x.\n",
drivers/net/ethernet/amd/sunlance.c
485
printk("dcsr=%8.8x\n", sbus_readl(lp->dregs + DMA_CSR));
drivers/net/ethernet/amd/sunlance.c
590
printk(KERN_NOTICE "%s: Carrier Lost, trying %s\n",
drivers/net/ethernet/amd/sunlance.c
606
printk(KERN_ERR "%s: Tx: ERR_BUF|ERR_UFL, restarting\n",
drivers/net/ethernet/amd/sunlance.c
758
printk(KERN_NOTICE "%s: Carrier Lost, trying %s\n",
drivers/net/ethernet/amd/sunlance.c
774
printk(KERN_ERR "%s: Tx: ERR_BUF|ERR_UFL, restarting\n",
drivers/net/ethernet/amd/sunlance.c
846
printk(KERN_ERR "%s: Memory error, status %04x, addr %06x\n",
drivers/net/ethernet/amd/sunlance.c
849
printk(KERN_ERR "%s: Memory error, status %04x\n",
drivers/net/ethernet/amd/sunlance.c
918
printk(KERN_ERR "Lance: Can't get irq %d\n", dev->irq);
drivers/net/ethernet/amd/sunlance.c
985
printk(KERN_ERR "resetting ledma\n");
drivers/net/ethernet/apple/bmac.c
1188
printk(KERN_ERR "BMAC: can't use, need 3 addrs and 3 intrs\n");
drivers/net/ethernet/apple/bmac.c
1197
printk(KERN_ERR "BMAC: Can't get mac-address\n");
drivers/net/ethernet/apple/bmac.c
1215
printk(KERN_ERR "BMAC: can't request IO resource !\n");
drivers/net/ethernet/apple/bmac.c
1266
printk(KERN_ERR "BMAC: can't get irq %d\n", dev->irq);
drivers/net/ethernet/apple/bmac.c
1271
printk(KERN_ERR "BMAC: can't get irq %d\n", bp->tx_dma_intr);
drivers/net/ethernet/apple/bmac.c
1276
printk(KERN_ERR "BMAC: can't get irq %d\n", bp->rx_dma_intr);
drivers/net/ethernet/apple/bmac.c
1286
printk(KERN_ERR "BMAC: Ethernet registration failed\n");
drivers/net/ethernet/apple/bmac.c
1290
printk(KERN_INFO "%s: BMAC%s at %pM",
drivers/net/ethernet/apple/bmac.c
1293
printk("\n");
drivers/net/ethernet/apple/bmac.c
1440
printk(KERN_ERR "bmac: transmit timeout - resetting\n");
drivers/net/ethernet/apple/bmac.c
1490
printk("dbdma req 0x%x addr 0x%x baddr 0x%x xfer/res 0x%x\n",
drivers/net/ethernet/apple/bmac.c
422
printk(KERN_DEBUG "phy registers:");
drivers/net/ethernet/apple/bmac.c
425
printk(KERN_DEBUG);
drivers/net/ethernet/apple/bmac.c
426
printk(KERN_CONT " %.4x", bmac_mif_read(dev, addr));
drivers/net/ethernet/apple/bmac.c
428
printk(KERN_CONT "\n");
drivers/net/ethernet/apple/mace.c
118
printk(KERN_ERR "can't use MACE %pOF: need 3 addrs and 3 irqs\n",
drivers/net/ethernet/apple/mace.c
127
printk(KERN_ERR "Can't get mac-address for MACE %pOF\n",
drivers/net/ethernet/apple/mace.c
144
printk(KERN_ERR "MACE: can't request IO resources !\n");
drivers/net/ethernet/apple/mace.c
162
printk(KERN_ERR "MACE: can't map IO resources !\n");
drivers/net/ethernet/apple/mace.c
182
printk(KERN_ERR "MACE: can't map TX DMA resources !\n");
drivers/net/ethernet/apple/mace.c
190
printk(KERN_ERR "MACE: can't map RX DMA resources !\n");
drivers/net/ethernet/apple/mace.c
229
printk(KERN_ERR "MACE: can't get irq %d\n", dev->irq);
drivers/net/ethernet/apple/mace.c
234
printk(KERN_ERR "MACE: can't get irq %d\n", mp->tx_dma_intr);
drivers/net/ethernet/apple/mace.c
239
printk(KERN_ERR "MACE: can't get irq %d\n", mp->rx_dma_intr);
drivers/net/ethernet/apple/mace.c
245
printk(KERN_ERR "MACE: Cannot register net device, aborting.\n");
drivers/net/ethernet/apple/mace.c
249
printk(KERN_INFO "%s: MACE at %pM, chip revision %d.%d\n",
drivers/net/ethernet/apple/mace.c
333
printk(KERN_ERR "mace: cannot reset chip!\n");
drivers/net/ethernet/apple/mace.c
557
printk(KERN_DEBUG "mace: xmit frame too long (%d)\n", len);
drivers/net/ethernet/apple/mace.c
616
printk("Multicast filter :");
drivers/net/ethernet/apple/mace.c
618
printk("%02x ", multicast_filter[i]);
drivers/net/ethernet/apple/mace.c
619
printk("\n");
drivers/net/ethernet/apple/mace.c
654
printk(KERN_DEBUG "mace: babbling transmitter\n");
drivers/net/ethernet/apple/mace.c
657
printk(KERN_DEBUG "mace: jabbering transceiver\n");
drivers/net/ethernet/apple/mace.c
719
printk(KERN_ERR "mace: xmtfs not valid! (fs=%x xc=%d ds=%x)\n",
drivers/net/ethernet/apple/mace.c
756
printk(KERN_DEBUG "mace: tx ring ran out? (fs=%x xc=%d ds=%x)\n",
drivers/net/ethernet/apple/mace.c
829
printk(KERN_ERR "mace: transmit timeout - resetting\n");
drivers/net/ethernet/apple/mace.c
901
printk(KERN_DEBUG "mace: lost a status word\n");
drivers/net/ethernet/apple/macmace.c
280
printk(KERN_ERR "macmace: cannot reset chip!\n");
drivers/net/ethernet/apple/macmace.c
377
printk(KERN_ERR "%s: can't get irq %d\n", dev->name, dev->irq);
drivers/net/ethernet/apple/macmace.c
381
printk(KERN_ERR "%s: can't get irq %d\n", dev->name, mp->dma_intr);
drivers/net/ethernet/apple/macmace.c
457
printk(KERN_ERR "macmace: tx queue running but no free buffers.\n");
drivers/net/ethernet/apple/macmace.c
550
printk(KERN_DEBUG "macmace: babbling transmitter\n");
drivers/net/ethernet/apple/macmace.c
553
printk(KERN_DEBUG "macmace: jabbering transceiver\n");
drivers/net/ethernet/apple/macmace.c
573
printk(KERN_ERR "macmace: xmtfs not valid! (fs=%x)\n", fs);
drivers/net/ethernet/apple/macmace.c
582
printk(KERN_DEBUG "macmace: tx ring ran out? (fs=%x)\n", fs);
drivers/net/ethernet/apple/macmace.c
617
printk(KERN_ERR "macmace: transmit timeout - resetting\n");
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
563
printk(KERN_INFO "Invalid sw len: %x\n", sw.len);
drivers/net/ethernet/aquantia/atlantic/hw_atl/hw_atl_utils.c
576
printk(KERN_INFO "Invalid fw len: %x\n", fw.len);
drivers/net/ethernet/atheros/atlx/atl2.c
1199
printk(KERN_INFO "%s: %s NIC Link is Up<%d Mbps %s>\n",
drivers/net/ethernet/atheros/atlx/atl2.c
1335
printk(KERN_ERR "atl2: No usable DMA configuration, aborting\n");
drivers/net/ethernet/atheros/atlx/atl2.c
1525
printk(KERN_DEBUG
drivers/net/ethernet/atheros/atlx/atl2.c
1630
printk(KERN_ERR
drivers/net/ethernet/atheros/atlx/atl2.c
2615
printk(KERN_ERR "atl2: PCIe link down for at least 25ms !\n");
drivers/net/ethernet/atheros/atlx/atl2.c
2868
printk(KERN_INFO "%s Enabled\n", opt->name);
drivers/net/ethernet/atheros/atlx/atl2.c
2871
printk(KERN_INFO "%s Disabled\n", opt->name);
drivers/net/ethernet/atheros/atlx/atl2.c
2877
printk(KERN_INFO "%s set to %i\n", opt->name, *value);
drivers/net/ethernet/atheros/atlx/atl2.c
2886
printk(KERN_INFO "%s\n", ent->str);
drivers/net/ethernet/atheros/atlx/atl2.c
2895
printk(KERN_INFO "Invalid %s specified (%i) %s\n",
drivers/net/ethernet/atheros/atlx/atl2.c
2916
printk(KERN_NOTICE "Warning: no configuration for board #%i\n",
drivers/net/ethernet/atheros/atlx/atl2.c
2918
printk(KERN_NOTICE "Using defaults for all values\n");
drivers/net/ethernet/atheros/atlx/atl2.c
490
printk(KERN_WARNING
drivers/net/ethernet/atheros/atlx/atl2.c
495
printk(KERN_WARNING
drivers/net/ethernet/atheros/atlx/atl2.c
499
printk(KERN_WARNING
drivers/net/ethernet/atheros/atlx/atl2.c
509
printk(KERN_WARNING
drivers/net/ethernet/atheros/atlx/atl2.c
560
printk(KERN_INFO "%s: %s NIC Link is Down\n",
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
830
printk("%s" "begin fw dump (mark 0x%x)\n", lvl, mark);
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
832
printk("%s", lvl);
drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
849
printk("%s" "end of fw dump\n", lvl);
drivers/net/ethernet/broadcom/sb1250-mac.c
1130
printk(KERN_ERR "dropped packet (1)\n");
drivers/net/ethernet/broadcom/sb1250-mac.c
2230
printk(KERN_ERR "%s: unable to register MDIO bus\n",
drivers/net/ethernet/broadcom/sb1250-mac.c
2238
printk(KERN_ERR "%s.%d: unable to register netdev\n",
drivers/net/ethernet/broadcom/sb1250-mac.c
2284
printk(KERN_ERR "%s: unable to get IRQ %d\n", dev->name,
drivers/net/ethernet/broadcom/sb1250-mac.c
2331
printk(KERN_ERR "%s: no PHY found\n", dev->name);
drivers/net/ethernet/broadcom/sb1250-mac.c
2338
printk(KERN_ERR "%s: could not attach to PHY\n", dev->name);
drivers/net/ethernet/broadcom/sb1250-mac.c
2431
printk (KERN_WARNING "%s: Transmit timed out\n",dev->name);
drivers/net/ethernet/broadcom/sb1250-mac.c
2536
printk(KERN_ERR "%s: failed to get resource\n",
drivers/net/ethernet/broadcom/sb1250-mac.c
2543
printk(KERN_ERR "%s: unable to map device registers\n",
drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c
765
printk("%s: passive open TID %u too large\n",
drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c
833
printk("do_abort_req_rss: couldn't get skb!\n");
drivers/net/ethernet/chelsio/cxgb3/cxgb3_offload.c
859
printk("%s: active establish TID %u too large\n",
drivers/net/ethernet/cirrus/ep93xx_eth.c
847
printk(KERN_INFO "%s: ep93xx on-chip ethernet, IRQ %d, %pM\n",
drivers/net/ethernet/davicom/dm9000.c
1703
printk(KERN_INFO "%s: dm9000%c at %p,%p IRQ %d MAC: %pM (%s)\n",
drivers/net/ethernet/dec/tulip/dmfe.c
763
printk("FU:%lx EC:%lx LC:%lx NC:%lx LOC:%lx TXJT:%lx RESET:%lx RCR8:%lx FAL:%lx TT:%lx\n",
drivers/net/ethernet/dec/tulip/tulip_core.c
570
printk(KERN_DEBUG
drivers/net/ethernet/dec/tulip/tulip_core.c
583
printk(KERN_DEBUG " Rx ring %p: ", tp->rx_ring);
drivers/net/ethernet/dec/tulip/tulip_core.c
586
printk(KERN_DEBUG " Tx ring %p: ", tp->tx_ring);
drivers/net/ethernet/dec/tulip/winbond-840.c
1505
printk(KERN_DEBUG" Tx ring at %p:\n", np->tx_ring);
drivers/net/ethernet/dec/tulip/winbond-840.c
1507
printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n",
drivers/net/ethernet/dec/tulip/winbond-840.c
1510
printk(KERN_DEBUG " Rx ring %p:\n", np->rx_ring);
drivers/net/ethernet/dec/tulip/winbond-840.c
1512
printk(KERN_DEBUG " #%d desc. %04x %04x %08x\n",
drivers/net/ethernet/dec/tulip/winbond-840.c
929
printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring);
drivers/net/ethernet/dec/tulip/winbond-840.c
931
printk(KERN_CONT " %08x", (unsigned int)np->rx_ring[i].status);
drivers/net/ethernet/dec/tulip/winbond-840.c
932
printk(KERN_CONT "\n");
drivers/net/ethernet/dec/tulip/winbond-840.c
933
printk(KERN_DEBUG " Tx ring %p: ", np->tx_ring);
drivers/net/ethernet/dec/tulip/winbond-840.c
935
printk(KERN_CONT " %08x", np->tx_ring[i].status);
drivers/net/ethernet/dec/tulip/winbond-840.c
936
printk(KERN_CONT "\n");
drivers/net/ethernet/dec/tulip/winbond-840.c
938
printk(KERN_DEBUG "Tx cur %d Tx dirty %d Tx Full %d, q bytes %d\n",
drivers/net/ethernet/dec/tulip/winbond-840.c
940
printk(KERN_DEBUG "Tx Descriptor addr %xh\n", ioread32(ioaddr+0x4C));
drivers/net/ethernet/dlink/dl2k.c
1021
printk (KERN_INFO
drivers/net/ethernet/dlink/dl2k.c
1052
printk (KERN_INFO "%s: Link up\n", dev->name);
drivers/net/ethernet/dlink/dl2k.c
1072
printk (KERN_INFO "%s: Link off\n", dev->name);
drivers/net/ethernet/dlink/dl2k.c
1086
printk (KERN_ERR "%s: HostError! IntStatus %4.4x.\n",
drivers/net/ethernet/dlink/dl2k.c
1330
printk("Warning!! Can't disable Auto negotiation in 1000Mbps, change to Manual 100Mbps, Full duplex.\n");
drivers/net/ethernet/dlink/dl2k.c
1537
printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1541
printk (KERN_INFO "Auto 1000 Mbps, Half duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1545
printk (KERN_INFO "Auto 100 Mbps, Full duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1549
printk (KERN_INFO "Auto 100 Mbps, Half duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1553
printk (KERN_INFO "Auto 10 Mbps, Full duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1557
printk (KERN_INFO "Auto 10 Mbps, Half duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1571
printk (KERN_INFO "Operating at 1000 Mbps, ");
drivers/net/ethernet/dlink/dl2k.c
1574
printk (KERN_INFO "Operating at 100 Mbps, ");
drivers/net/ethernet/dlink/dl2k.c
1577
printk (KERN_INFO "Operating at 10 Mbps, ");
drivers/net/ethernet/dlink/dl2k.c
1580
printk (KERN_CONT "Full duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1582
printk (KERN_CONT "Half duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1586
printk(KERN_INFO "Enable Tx Flow Control\n");
drivers/net/ethernet/dlink/dl2k.c
1588
printk(KERN_INFO "Disable Tx Flow Control\n");
drivers/net/ethernet/dlink/dl2k.c
1590
printk(KERN_INFO "Enable Rx Flow Control\n");
drivers/net/ethernet/dlink/dl2k.c
1592
printk(KERN_INFO "Disable Rx Flow Control\n");
drivers/net/ethernet/dlink/dl2k.c
1664
printk (KERN_INFO "Manual 100 Mbps, ");
drivers/net/ethernet/dlink/dl2k.c
1666
printk (KERN_INFO "Manual 10 Mbps, ");
drivers/net/ethernet/dlink/dl2k.c
1670
printk (KERN_CONT "Full duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1672
printk (KERN_CONT "Half duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1707
printk (KERN_INFO "Auto 1000 Mbps, Full duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1710
printk (KERN_INFO "Auto 1000 Mbps, half duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1723
printk (KERN_INFO "Operating at 1000 Mbps, ");
drivers/net/ethernet/dlink/dl2k.c
1725
printk (KERN_CONT "Full duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1727
printk (KERN_CONT "Half duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1731
printk(KERN_INFO "Enable Tx Flow Control\n");
drivers/net/ethernet/dlink/dl2k.c
1733
printk(KERN_INFO "Disable Tx Flow Control\n");
drivers/net/ethernet/dlink/dl2k.c
1735
printk(KERN_INFO "Enable Rx Flow Control\n");
drivers/net/ethernet/dlink/dl2k.c
1737
printk(KERN_INFO "Disable Rx Flow Control\n");
drivers/net/ethernet/dlink/dl2k.c
1780
printk (KERN_INFO "Manual full duplex\n");
drivers/net/ethernet/dlink/dl2k.c
1783
printk (KERN_INFO "Manual half duplex\n");
drivers/net/ethernet/dlink/dl2k.c
328
printk (KERN_ERR "%s: No MII PHY found!\n", dev->name);
drivers/net/ethernet/dlink/dl2k.c
354
printk (KERN_ERR "%s: EEPROM data CRC error.\n",
drivers/net/ethernet/dlink/dl2k.c
379
printk (KERN_ERR "Cell data error\n");
drivers/net/ethernet/dlink/dl2k.c
679
printk(KERN_INFO "Try to recover rx ring exhausted...\n");
drivers/net/ethernet/dlink/dl2k.c
690
printk (KERN_INFO
drivers/net/ethernet/dlink/dl2k.c
716
printk (KERN_INFO "%s: Tx timed out (%4.4x), is buffer full?\n",
drivers/net/ethernet/dlink/dl2k.c
885
printk (KERN_ERR "%s: Transmit error, TxStatus %4.4x, FrameId %d.\n",
drivers/net/ethernet/dlink/sundance.c
1124
printk (KERN_DEBUG
drivers/net/ethernet/dlink/sundance.c
1192
printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n",
drivers/net/ethernet/dlink/sundance.c
1211
printk
drivers/net/ethernet/dlink/sundance.c
1216
printk("%s: Transmit error status %4.4x.\n",
drivers/net/ethernet/dlink/sundance.c
1316
printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
drivers/net/ethernet/dlink/sundance.c
1343
printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n",
drivers/net/ethernet/dlink/sundance.c
1348
printk(KERN_DEBUG " netdev_rx() Rx error was %8.8x.\n",
drivers/net/ethernet/dlink/sundance.c
1360
printk(KERN_WARNING "%s: Oversized Ethernet frame,"
drivers/net/ethernet/dlink/sundance.c
1368
printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d"
drivers/net/ethernet/dlink/sundance.c
1459
printk(KERN_INFO "%s: Link up\n", dev->name);
drivers/net/ethernet/dlink/sundance.c
1465
printk(KERN_INFO "%s: Link changed: ",
drivers/net/ethernet/dlink/sundance.c
1469
printk("100Mbps, full duplex\n");
drivers/net/ethernet/dlink/sundance.c
1472
printk("100Mbps, half duplex\n");
drivers/net/ethernet/dlink/sundance.c
1475
printk("10Mbps, full duplex\n");
drivers/net/ethernet/dlink/sundance.c
1478
printk("10Mbps, half duplex\n");
drivers/net/ethernet/dlink/sundance.c
1480
printk("\n");
drivers/net/ethernet/dlink/sundance.c
1486
printk(KERN_INFO "%s: Link changed: %dMbps ,",
drivers/net/ethernet/dlink/sundance.c
1488
printk("%s duplex.\n",
drivers/net/ethernet/dlink/sundance.c
1501
printk(KERN_INFO "%s: Link down\n", dev->name);
drivers/net/ethernet/dlink/sundance.c
1509
printk(KERN_ERR "%s: Something Wicked happened! %4.4x.\n",
drivers/net/ethernet/dlink/sundance.c
1838
printk(KERN_DEBUG "%s: Shutting down ethercard, status was Tx %2.2x "
drivers/net/ethernet/dlink/sundance.c
1842
printk(KERN_DEBUG "%s: Queue pointers were Tx %d / %d, Rx %d / %d.\n",
drivers/net/ethernet/dlink/sundance.c
1872
printk(KERN_DEBUG " Tx ring at %8.8x:\n",
drivers/net/ethernet/dlink/sundance.c
1875
printk(KERN_DEBUG " #%d desc. %4.4x %8.8x %8.8x.\n",
drivers/net/ethernet/dlink/sundance.c
1878
printk(KERN_DEBUG " Rx ring %8.8x:\n",
drivers/net/ethernet/dlink/sundance.c
1881
printk(KERN_DEBUG " #%d desc. %4.4x %4.4x %8.8x\n",
drivers/net/ethernet/dlink/sundance.c
1969
printk(KERN_ERR "%s: Can't resume interface!\n",
drivers/net/ethernet/dlink/sundance.c
458
printk(KERN_WARNING "%s : reset not completed !!\n", dev->name);
drivers/net/ethernet/dlink/sundance.c
582
printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n",
drivers/net/ethernet/dlink/sundance.c
608
printk(KERN_INFO "%s: MII PHY found at address %d, status "
drivers/net/ethernet/dlink/sundance.c
616
printk(KERN_INFO "%s: No MII transceiver found, aborting. ASIC status %x\n",
drivers/net/ethernet/dlink/sundance.c
674
printk (KERN_INFO "Override speed=%d, %s duplex\n",
drivers/net/ethernet/dlink/sundance.c
682
printk("ASIC Control is %x.\n", ioread32(ioaddr + ASICCtrl));
drivers/net/ethernet/dlink/sundance.c
685
printk("ASIC Control is now %x.\n", ioread32(ioaddr + ASICCtrl));
drivers/net/ethernet/dlink/sundance.c
852
printk(KERN_DEBUG "%s: netdev_open() irq %d\n", dev->name, irq);
drivers/net/ethernet/dlink/sundance.c
898
printk(KERN_DEBUG "%s: Done netdev_open(), status: Rx %x Tx %x "
drivers/net/ethernet/dlink/sundance.c
936
printk(KERN_INFO "%s: Setting %s-duplex based on MII #%d "
drivers/net/ethernet/dlink/sundance.c
951
printk(KERN_DEBUG "%s: Media selection timer tick, intr status %4.4x, "
drivers/net/ethernet/dlink/sundance.c
970
printk(KERN_WARNING "%s: Transmit timed out, TxStatus %2.2x "
drivers/net/ethernet/dlink/sundance.c
978
printk(KERN_DEBUG "%02x %08llx %08x %08x(%02x) %08x %08x\n", i,
drivers/net/ethernet/dlink/sundance.c
986
printk(KERN_DEBUG "TxListPtr=%08x netif_queue_stopped=%d\n",
drivers/net/ethernet/dlink/sundance.c
989
printk(KERN_DEBUG "cur_tx=%d(%02x) dirty_tx=%d(%02x)\n",
drivers/net/ethernet/dlink/sundance.c
992
printk(KERN_DEBUG "cur_rx=%d dirty_rx=%d\n", np->cur_rx, np->dirty_rx);
drivers/net/ethernet/dlink/sundance.c
993
printk(KERN_DEBUG "cur_task=%d\n", np->cur_task);
drivers/net/ethernet/emulex/benet/be_main.c
6102
printk(KERN_WARNING DRV_NAME
drivers/net/ethernet/fealnx.c
1085
printk(KERN_DEBUG "%s: Media selection timer tick, status %8.8x "
drivers/net/ethernet/fealnx.c
1170
printk(KERN_WARNING "%s: resetting tx and rx machinery\n", dev->name);
drivers/net/ethernet/fealnx.c
1195
printk(KERN_WARNING
drivers/net/ethernet/fealnx.c
1200
printk(KERN_DEBUG " Rx ring %p: ", np->rx_ring);
drivers/net/ethernet/fealnx.c
1202
printk(KERN_CONT " %8.8x",
drivers/net/ethernet/fealnx.c
1204
printk(KERN_CONT "\n");
drivers/net/ethernet/fealnx.c
1205
printk(KERN_DEBUG " Tx ring %p: ", np->tx_ring);
drivers/net/ethernet/fealnx.c
1207
printk(KERN_CONT " %4.4x", np->tx_ring[i].status);
drivers/net/ethernet/fealnx.c
1208
printk(KERN_CONT "\n");
drivers/net/ethernet/fealnx.c
1447
printk(KERN_DEBUG "%s: Interrupt, status %4.4x.\n", dev->name,
drivers/net/ethernet/fealnx.c
1566
printk(KERN_WARNING "%s: Too much work at interrupt, "
drivers/net/ethernet/fealnx.c
1595
printk(KERN_DEBUG "%s: exiting interrupt, status=%#4.4x.\n",
drivers/net/ethernet/fealnx.c
1621
printk(KERN_DEBUG " netdev_rx() status was %8.8x.\n", rx_status);
drivers/net/ethernet/fealnx.c
1627
printk(KERN_DEBUG
drivers/net/ethernet/fealnx.c
1668
printk(KERN_DEBUG
drivers/net/ethernet/fealnx.c
1691
printk(KERN_DEBUG " netdev_rx() normal Rx pkt length %d"
drivers/net/ethernet/fealnx.c
656
printk(KERN_INFO "%s: %s at %p, %pM, IRQ %d.\n",
drivers/net/ethernet/fealnx.c
694
printk(KERN_ERR "fealnx: remove for unknown device\n");
drivers/net/ethernet/fealnx.c
901
printk(KERN_DEBUG "%s: Done netdev_open().\n", dev->name);
drivers/net/ethernet/freescale/ucc_geth.c
193
printk("0x%08x: %08x %08x %08x %08x\r\n",
drivers/net/ethernet/freescale/ucc_geth.c
199
printk("0x%08x: ", (u32) i);
drivers/net/ethernet/freescale/ucc_geth.c
201
printk("%08x ", *((u32 *) (i)));
drivers/net/ethernet/freescale/ucc_geth.c
203
printk("%02x", *((i)));
drivers/net/ethernet/freescale/ucc_geth.c
205
printk("\r\n");
drivers/net/ethernet/freescale/ucc_geth.c
53
printk(level format "\n", ## arg)
drivers/net/ethernet/i825xx/82596.c
1027
DEB(DEB_ERRORS,printk(KERN_ERR "%s: transmit timed out, status resetting.\n",
drivers/net/ethernet/i825xx/82596.c
1034
DEB(DEB_ERRORS,printk(KERN_ERR "Resetting board.\n"));
drivers/net/ethernet/i825xx/82596.c
1039
DEB(DEB_ERRORS,printk(KERN_ERR "Kicking board.\n"));
drivers/net/ethernet/i825xx/82596.c
1056
DEB(DEB_STARTTX,printk(KERN_DEBUG "%s: i596_start_xmit(%x,%p) called\n",
drivers/net/ethernet/i825xx/82596.c
1070
printk(KERN_NOTICE "%s: xmit ring full, dropping packet.\n",
drivers/net/ethernet/i825xx/82596.c
1108
printk(KERN_DEBUG "i596 0x%p, %pM --> %pM %02X%02X, %s\n",
drivers/net/ethernet/i825xx/82596.c
1142
printk(KERN_NOTICE "Ethernet probe disabled - chip not present\n");
drivers/net/ethernet/i825xx/82596.c
1177
DEB(DEB_PROBE,printk(KERN_INFO "%s: 82596 at %#3lx,", dev->name, dev->base_addr));
drivers/net/ethernet/i825xx/82596.c
1180
DEB(DEB_PROBE,printk(" %2.2X", eth_addr[i]));
drivers/net/ethernet/i825xx/82596.c
1183
DEB(DEB_PROBE,printk(" IRQ %d.\n", dev->irq));
drivers/net/ethernet/i825xx/82596.c
1185
DEB(DEB_PROBE,printk(KERN_INFO "%s", version));
drivers/net/ethernet/i825xx/82596.c
1194
DEB(DEB_INIT,printk(KERN_DEBUG "%s: lp at 0x%08lx (%zd bytes), "
drivers/net/ethernet/i825xx/82596.c
1246
printk(KERN_ERR "i596_interrupt(): irq %d for unknown device.\n", irq);
drivers/net/ethernet/i825xx/82596.c
1258
DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt, IRQ %d, status %4.4x.\n",
drivers/net/ethernet/i825xx/82596.c
1268
DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt completed command.\n", dev->name));
drivers/net/ethernet/i825xx/82596.c
1270
DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt command unit inactive %x.\n", dev->name, status & 0x0700));
drivers/net/ethernet/i825xx/82596.c
1275
DEB(DEB_STATUS,printk(KERN_DEBUG "cmd_head->status = %04x, ->command = %04x\n",
drivers/net/ethernet/i825xx/82596.c
1312
DEB(DEB_TDR,printk(KERN_INFO "%s: link ok.\n", dev->name));
drivers/net/ethernet/i825xx/82596.c
1315
printk(KERN_ERR "%s: Transceiver problem.\n", dev->name);
drivers/net/ethernet/i825xx/82596.c
1317
printk(KERN_ERR "%s: Termination problem.\n", dev->name);
drivers/net/ethernet/i825xx/82596.c
1319
printk(KERN_ERR "%s: Short circuit.\n", dev->name);
drivers/net/ethernet/i825xx/82596.c
1321
DEB(DEB_TDR,printk(KERN_INFO "%s: Time %d.\n", dev->name, status & 0x07ff));
drivers/net/ethernet/i825xx/82596.c
1347
DEB(DEB_INTS,printk(KERN_DEBUG "%s: i596 interrupt received a frame.\n", dev->name));
drivers/net/ethernet/i825xx/82596.c
1352
DEB(DEB_ERRORS,printk(KERN_ERR "%s: i596 interrupt receive unit inactive, status 0x%x\n", dev->name, status));
drivers/net/ethernet/i825xx/82596.c
1382
DEB(DEB_INTS,printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name));
drivers/net/ethernet/i825xx/82596.c
1395
DEB(DEB_INIT,printk(KERN_DEBUG "%s: Shutting down ethercard, status was %4.4x.\n",
drivers/net/ethernet/i825xx/82596.c
1446
DEB(DEB_MULTI,printk(KERN_DEBUG "%s: set multicast list, %d entries, promisc %s, allmulti %s\n",
drivers/net/ethernet/i825xx/82596.c
1479
printk(KERN_ERR "%s: Only %d multicast addresses supported",
drivers/net/ethernet/i825xx/82596.c
1499
DEB(DEB_MULTI,printk(KERN_INFO "%s: Adding address %pM\n",
drivers/net/ethernet/i825xx/82596.c
417
printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n",
drivers/net/ethernet/i825xx/82596.c
431
printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n",
drivers/net/ethernet/i825xx/82596.c
447
printk(KERN_ERR "%s: %s.\n", dev->name, str);
drivers/net/ethernet/i825xx/82596.c
462
printk(KERN_ERR "lp and scp at %p, .sysbus = %08lx, .iscp = %p\n",
drivers/net/ethernet/i825xx/82596.c
464
printk(KERN_ERR "iscp at %p, iscp.stat = %08lx, .scb = %p\n",
drivers/net/ethernet/i825xx/82596.c
466
printk(KERN_ERR "scb at %p, scb.status = %04x, .command = %04x,"
drivers/net/ethernet/i825xx/82596.c
470
printk(KERN_ERR " errors: crc %lx, align %lx, resource %lx,"
drivers/net/ethernet/i825xx/82596.c
476
printk(KERN_ERR "cmd at %p, .status = %04x, .command = %04x, .b_next = %p\n",
drivers/net/ethernet/i825xx/82596.c
481
printk(KERN_ERR "rfd_head = %p\n", rfd);
drivers/net/ethernet/i825xx/82596.c
483
printk(KERN_ERR " %p .stat %04x, .cmd %04x, b_next %p, rbd %p,"
drivers/net/ethernet/i825xx/82596.c
490
printk(KERN_ERR "rbd_head = %p\n", rbd);
drivers/net/ethernet/i825xx/82596.c
492
printk(KERN_ERR " %p .count %04x, b_next %p, b_data %p, size %04x\n",
drivers/net/ethernet/i825xx/82596.c
519
printk(KERN_ERR "%s: Error interrupt\n", dev->name);
drivers/net/ethernet/i825xx/82596.c
677
DEB(DEB_INIT,printk(KERN_DEBUG "%s: starting i82596.\n", dev->name));
drivers/net/ethernet/i825xx/82596.c
683
DEB(DEB_INIT,printk(KERN_DEBUG "%s: i82596 initialization successful\n", dev->name));
drivers/net/ethernet/i825xx/82596.c
707
DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdConfigure\n", dev->name));
drivers/net/ethernet/i825xx/82596.c
712
DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name));
drivers/net/ethernet/i825xx/82596.c
717
DEB(DEB_INIT,printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name));
drivers/net/ethernet/i825xx/82596.c
727
DEB(DEB_INIT,printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name));
drivers/net/ethernet/i825xx/82596.c
735
DEB(DEB_INIT,printk(KERN_DEBUG "%s: Receive unit started OK\n", dev->name));
drivers/net/ethernet/i825xx/82596.c
739
printk(KERN_CRIT "%s: Failed to initialise 82596\n", dev->name);
drivers/net/ethernet/i825xx/82596.c
751
DEB(DEB_RXFRAME,printk(KERN_DEBUG "i596_rx(), rfd_head %p, rbd_head %p\n",
drivers/net/ethernet/i825xx/82596.c
762
printk(KERN_CRIT "%s: rbd chain broken!\n", dev->name);
drivers/net/ethernet/i825xx/82596.c
766
DEB(DEB_RXFRAME, printk(KERN_DEBUG " rfd %p, rfd.rbd %p, rfd.stat %04x\n",
drivers/net/ethernet/i825xx/82596.c
826
DEB(DEB_ERRORS, printk(KERN_DEBUG "%s: Error, rfd.stat = 0x%04x\n",
drivers/net/ethernet/i825xx/82596.c
870
DEB(DEB_RXFRAME,printk(KERN_DEBUG "frames %d\n", frames));
drivers/net/ethernet/i825xx/82596.c
914
DEB(DEB_RESET,printk(KERN_DEBUG "i596_reset\n"));
drivers/net/ethernet/i825xx/82596.c
942
DEB(DEB_ADDCMD,printk(KERN_DEBUG "i596_add_cmd\n"));
drivers/net/ethernet/i825xx/82596.c
971
printk(KERN_NOTICE "%s: command unit timed out, status resetting.\n", dev->name);
drivers/net/ethernet/i825xx/82596.c
981
DEB(DEB_OPEN,printk(KERN_DEBUG "%s: i596_open() irq %d.\n", dev->name, dev->irq));
drivers/net/ethernet/i825xx/82596.c
984
printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
drivers/net/ethernet/i825xx/ether1.c
1034
printk(KERN_INFO "%s: ether1 in slot %d, %pM\n",
drivers/net/ethernet/i825xx/ether1.c
272
printk ("\n");
drivers/net/ethernet/i825xx/ether1.c
273
printk (KERN_CRIT "%s: RAM failed with (%02X instead of %02X) at 0x%04X",
drivers/net/ethernet/i825xx/ether1.c
283
printk ("\n");
drivers/net/ethernet/i825xx/ether1.c
285
printk (" - 0x%04X\n", i - 1);
drivers/net/ethernet/i825xx/ether1.c
292
printk (" - 0x%04X\n", BUFFER_SIZE);
drivers/net/ethernet/i825xx/ether1.c
466
printk (KERN_ERR "%s: detected either RAM fault or compiler bug\n",
drivers/net/ethernet/i825xx/ether1.c
517
printk (KERN_WARNING "%s: can't initialise 82586: iscp is busy\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
531
printk (KERN_WARNING "%s: can't initialise 82586: config status %04X\n", dev->name, status);
drivers/net/ethernet/i825xx/ether1.c
532
printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
drivers/net/ethernet/i825xx/ether1.c
548
printk (KERN_WARNING "%s: can't initialise 82586: set address status %04X\n", dev->name, status);
drivers/net/ethernet/i825xx/ether1.c
549
printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
drivers/net/ethernet/i825xx/ether1.c
565
printk (KERN_WARNING "%s: can't initialise 82586: set multicast status %04X\n", dev->name, status);
drivers/net/ethernet/i825xx/ether1.c
566
printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
drivers/net/ethernet/i825xx/ether1.c
582
printk (KERN_WARNING "%s: can't tdr (ignored)\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
583
printk (KERN_DEBUG "%s: SCB=[STS=%04X CMD=%04X CBL=%04X RFA=%04X]\n", dev->name,
drivers/net/ethernet/i825xx/ether1.c
591
printk (KERN_WARNING "%s: i/f failed tdr: transceiver problem\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
594
printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d.%d us away\n", dev->name,
drivers/net/ethernet/i825xx/ether1.c
598
printk (KERN_WARNING "%s: i/f failed tdr: cable %s %d clks away\n", dev->name,
drivers/net/ethernet/i825xx/ether1.c
655
printk(KERN_WARNING "%s: transmit timeout, network cable problem?\n",
drivers/net/ethernet/i825xx/ether1.c
657
printk(KERN_WARNING "%s: resetting device\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
662
printk (KERN_ERR "%s: unable to restart interface\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
678
printk(KERN_WARNING "%s: resetting device\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
683
printk(KERN_ERR "%s: unable to restart interface\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
767
printk (KERN_WARNING "%s: strange command complete with no tx command!\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
780
printk (KERN_ERR "%s: strange command complete without completed command\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
785
printk (KERN_WARNING "%s: strange command %d complete! (offset %04X)", dev->name,
drivers/net/ethernet/i825xx/ether1.c
803
printk (KERN_WARNING "%s: cts lost\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
811
printk (KERN_ERR "%s: tx buffer chaining error: tx command points to itself\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
818
printk (KERN_ERR "%s: tx buffer chaining error: no nop after tx command\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
828
printk (KERN_ERR "%s: tx buffer chaining error: no tx command after nop\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
874
printk(KERN_WARNING "%s: %s\n", dev->name,
drivers/net/ethernet/i825xx/ether1.c
882
printk(KERN_ERR "%s: receiver buffer chaining error (%04X != %04X)\n",
drivers/net/ethernet/i825xx/ether1.c
911
printk (KERN_WARNING "%s: CU went not ready ???\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
927
printk (KERN_WARNING "%s: RU went not ready: RU suspended\n", dev->name);
drivers/net/ethernet/i825xx/ether1.c
932
printk(KERN_WARNING "%s: RU went not ready: %04X\n", dev->name,
drivers/net/ethernet/i825xx/ether1.c
934
printk (KERN_WARNING "RU ptr = %04X\n", ether1_readw(dev, SCB_ADDR, scb_t, scb_rfa_offset,
drivers/net/ethernet/i825xx/ether1.c
972
printk(KERN_INFO "%s", version);
drivers/net/ethernet/i825xx/lasi_82596.c
153
printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
drivers/net/ethernet/i825xx/lasi_82596.c
158
printk(KERN_INFO "Found i82596 at 0x%lx, IRQ %d\n",
drivers/net/ethernet/i825xx/lasi_82596.c
174
printk(KERN_INFO
drivers/net/ethernet/i825xx/lasi_82596.c
228
printk(KERN_INFO LASI_82596_DRIVER_VERSION "\n");
drivers/net/ethernet/i825xx/lib82596.c
1003
DEB(DEB_STARTTX, printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
1019
DEB(DEB_ERRORS, printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
1059
printk(KERN_DEBUG "i596 0x%p, %pM --> %pM %02X%02X, %s\n",
drivers/net/ethernet/i825xx/lib82596.c
1107
DEB(DEB_PROBE, printk(KERN_INFO "%s: 82596 at %#3lx, %pM IRQ %d.\n",
drivers/net/ethernet/i825xx/lib82596.c
1110
DEB(DEB_INIT, printk(KERN_INFO
drivers/net/ethernet/i825xx/lib82596.c
1142
DEB(DEB_INTS, printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
1149
DEB(DEB_ERRORS, printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
1161
printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
1166
printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
1178
printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
1221
printk(KERN_DEBUG "%s: link ok.\n",
drivers/net/ethernet/i825xx/lib82596.c
1225
printk(KERN_ERR
drivers/net/ethernet/i825xx/lib82596.c
1229
printk(KERN_ERR
drivers/net/ethernet/i825xx/lib82596.c
1233
printk(KERN_ERR
drivers/net/ethernet/i825xx/lib82596.c
1238
printk(KERN_DEBUG "%s: Time %d.\n",
drivers/net/ethernet/i825xx/lib82596.c
1278
printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
1286
printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
1307
DEB(DEB_INTS, printk(KERN_DEBUG "%s: exiting interrupt.\n", dev->name));
drivers/net/ethernet/i825xx/lib82596.c
1321
printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
1355
printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
1383
printk(KERN_INFO
drivers/net/ethernet/i825xx/lib82596.c
1396
printk(KERN_NOTICE "%s: Only %d multicast addresses supported",
drivers/net/ethernet/i825xx/lib82596.c
1415
printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
407
printk(KERN_ERR "%s: %s, iscp.stat %04x, didn't clear\n",
drivers/net/ethernet/i825xx/lib82596.c
423
printk(KERN_ERR "%s: %s, status %4.4x, cmd %4.4x.\n",
drivers/net/ethernet/i825xx/lib82596.c
441
printk(KERN_DEBUG "lp and scp at %p, .sysbus = %08x, .iscp = %08x\n",
drivers/net/ethernet/i825xx/lib82596.c
443
printk(KERN_DEBUG "iscp at %p, iscp.stat = %08x, .scb = %08x\n",
drivers/net/ethernet/i825xx/lib82596.c
445
printk(KERN_DEBUG "scb at %p, scb.status = %04x, .command = %04x,"
drivers/net/ethernet/i825xx/lib82596.c
449
printk(KERN_DEBUG " errors: crc %x, align %x, resource %x,"
drivers/net/ethernet/i825xx/lib82596.c
456
printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
464
printk(KERN_DEBUG "rfd_head = %p\n", rfd);
drivers/net/ethernet/i825xx/lib82596.c
466
printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
475
printk(KERN_DEBUG "rbd_head = %p\n", rbd);
drivers/net/ethernet/i825xx/lib82596.c
477
printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
603
DEB(DEB_INIT, printk(KERN_DEBUG "%s: starting i82596.\n", dev->name));
drivers/net/ethernet/i825xx/lib82596.c
613
DEB(DEB_INIT, printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
618
printk(KERN_ERR "%s: IRQ %d not free\n", dev->name, dev->irq);
drivers/net/ethernet/i825xx/lib82596.c
628
DEB(DEB_INIT, printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
635
DEB(DEB_INIT, printk(KERN_DEBUG "%s: queuing CmdSASetup\n", dev->name));
drivers/net/ethernet/i825xx/lib82596.c
641
DEB(DEB_INIT, printk(KERN_DEBUG "%s: queuing CmdTDR\n", dev->name));
drivers/net/ethernet/i825xx/lib82596.c
652
DEB(DEB_INIT, printk(KERN_DEBUG "%s: Issuing RX_START\n", dev->name));
drivers/net/ethernet/i825xx/lib82596.c
662
DEB(DEB_INIT, printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
669
printk(KERN_ERR "%s: Failed to initialise 82596\n", dev->name);
drivers/net/ethernet/i825xx/lib82596.c
682
DEB(DEB_RXFRAME, printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
697
printk(KERN_ERR "%s: rbd chain broken!\n", dev->name);
drivers/net/ethernet/i825xx/lib82596.c
701
DEB(DEB_RXFRAME, printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
770
DEB(DEB_ERRORS, printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
819
DEB(DEB_RXFRAME, printk(KERN_DEBUG "frames %d\n", frames));
drivers/net/ethernet/i825xx/lib82596.c
870
DEB(DEB_RESET, printk(KERN_DEBUG "i596_reset\n"));
drivers/net/ethernet/i825xx/lib82596.c
901
DEB(DEB_ADDCMD, printk(KERN_DEBUG "i596_add_cmd cmd_head %p\n",
drivers/net/ethernet/i825xx/lib82596.c
935
printk(KERN_ERR
drivers/net/ethernet/i825xx/lib82596.c
946
DEB(DEB_OPEN, printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
950
printk(KERN_ERR "%s: Failed to init rx bufs\n", dev->name);
drivers/net/ethernet/i825xx/lib82596.c
954
printk(KERN_ERR "%s: Failed to init memory\n", dev->name);
drivers/net/ethernet/i825xx/lib82596.c
971
DEB(DEB_ERRORS, printk(KERN_DEBUG
drivers/net/ethernet/i825xx/lib82596.c
979
DEB(DEB_ERRORS, printk(KERN_DEBUG "Resetting board.\n"));
drivers/net/ethernet/i825xx/lib82596.c
984
DEB(DEB_ERRORS, printk(KERN_DEBUG "Kicking board.\n"));
drivers/net/ethernet/i825xx/sni_82596.c
123
printk(KERN_ERR "%s: IRQ not found for i82596 at 0x%lx\n",
drivers/net/ethernet/i825xx/sni_82596.c
179
printk(KERN_INFO SNI_82596_DRIVER_VERSION "\n");
drivers/net/ethernet/i825xx/sni_82596.c
96
printk(KERN_INFO "Found i82596 at 0x%x\n", res->start);
drivers/net/ethernet/i825xx/sun3_82586.c
1014
printk("%s: Sorry, max. framelength is %d bytes. The length of your frame is %d bytes.\n",dev->name,XMIT_BUFF_SIZE,skb->len);
drivers/net/ethernet/i825xx/sun3_82586.c
1023
printk("%s: Queue was locked\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
1043
printk("%s: Hmmm .. CU is still running and we wanna send a new packet.\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
1044
printk("%s: stat: %04x %04x\n",dev->name,p->scb->cus,swab16(p->xmit_cmds[0]->cmd_status));
drivers/net/ethernet/i825xx/sun3_82586.c
106
printk("%s: scb_cmd timed out: %04x,%04x .. disabling i82586!!\n",dev->name,p->scb->cmd_cuc,p->scb->cus); \
drivers/net/ethernet/i825xx/sun3_82586.c
1070
printk("%s: Can't start transmit-command.\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
114
printk("%s: scb_cmd (ruc) timed out: %04x,%04x .. disabling i82586!!\n",dev->name,p->scb->cmd_ruc,p->scb->rus); \
drivers/net/ethernet/i825xx/sun3_82586.c
1178
printk("%s: Can't get dump information.\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
1181
printk("%02x ",(int) ((unsigned char *) (dump_cmd + 1))[i]);
drivers/net/ethernet/i825xx/sun3_82586.c
1183
printk("\n");
drivers/net/ethernet/i825xx/sun3_82586.c
1185
printk("\n");
drivers/net/ethernet/i825xx/sun3_82586.c
274
printk("%s: Init-Problems (alloc).\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
351
printk("%s: SUN3 Intel 82586 found at %lx, ",dev->name,dev->base_addr);
drivers/net/ethernet/i825xx/sun3_82586.c
362
printk("\n%s: Illegal memory size %d. Allowed is 0x2000 or 0x4000 or 0x8000 bytes.\n",dev->name,size);
drivers/net/ethernet/i825xx/sun3_82586.c
367
printk("?memcheck, Can't find memory at 0x%lx with size %d!\n",dev->mem_start,size);
drivers/net/ethernet/i825xx/sun3_82586.c
388
printk("Memaddr: 0x%lx, Memsize: %d, IRQ %d\n",dev->mem_start,size, dev->irq);
drivers/net/ethernet/i825xx/sun3_82586.c
432
printk("%s: switching to promisc. mode\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
450
printk("%s: configure command failed: %x\n",dev->name,swab16(cfg_cmd->cmd_status));
drivers/net/ethernet/i825xx/sun3_82586.c
474
printk("%s (82586): individual address setup command failed: %04x\n",dev->name,swab16(ias_cmd->cmd_status));
drivers/net/ethernet/i825xx/sun3_82586.c
497
printk("%s: Problems while running the TDR.\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
510
printk("%s: TDR: Transceiver problem. Check the cable(s)!\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
512
printk("%s: TDR: No correct termination %d clocks away.\n",dev->name,result & TDR_TIMEMASK);
drivers/net/ethernet/i825xx/sun3_82586.c
516
printk("%s: TDR: Detected a short circuit %d clocks away.\n",dev->name,result & TDR_TIMEMASK);
drivers/net/ethernet/i825xx/sun3_82586.c
519
printk("%s: TDR: Unknown status %04x\n",dev->name,result);
drivers/net/ethernet/i825xx/sun3_82586.c
545
printk("%s: Can't apply multicast-address-list.\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
586
printk("%s: not enough shared-mem for your configuration!\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
690
printk ("sun3_82586-interrupt: irq %d for unknown device.\n",irq);
drivers/net/ethernet/i825xx/sun3_82586.c
696
printk("I");
drivers/net/ethernet/i825xx/sun3_82586.c
710
printk("(R)");
drivers/net/ethernet/i825xx/sun3_82586.c
720
printk("%s: Receiver-Unit went 'NOT READY': %04x/%02x.\n",dev->name,(int) stat,(int) p->scb->rus);
drivers/net/ethernet/i825xx/sun3_82586.c
732
printk("%s: oops! CU has left active state. stat: %04x/%02x.\n",dev->name,(int) stat,(int) p->scb->cus);
drivers/net/ethernet/i825xx/sun3_82586.c
737
printk("%d",cnt++);
drivers/net/ethernet/i825xx/sun3_82586.c
742
printk("%s: Acknowledge timed out.\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
749
printk("i");
drivers/net/ethernet/i825xx/sun3_82586.c
766
printk("R");
drivers/net/ethernet/i825xx/sun3_82586.c
801
printk("%s: Whoops .. no end mark in RBD list\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
809
printk("%s: received oversized frame! length: %d\n",dev->name,totlen);
drivers/net/ethernet/i825xx/sun3_82586.c
815
printk("%s: oops! rfd-error-status: %04x\n",dev->name,status);
drivers/net/ethernet/i825xx/sun3_82586.c
827
printk("%d",cnt++);
drivers/net/ethernet/i825xx/sun3_82586.c
847
printk("%s: RU hasn't fetched next RFD (not busy/complete)\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
858
printk("%s: received a FC intr. without having a frame: %04x %d\n",dev->name,status,old_at_least);
drivers/net/ethernet/i825xx/sun3_82586.c
862
printk("%04x:%04x ",rfds->status,rbds->status);
drivers/net/ethernet/i825xx/sun3_82586.c
865
printk("\nerrs: %04x %04x stat: %04x\n",(int)p->scb->rsc_errs,(int)p->scb->ovrn_errs,(int)p->scb->status);
drivers/net/ethernet/i825xx/sun3_82586.c
866
printk("\nerrs: %04x %04x rus: %02x, cus: %02x\n",(int)p->scb->rsc_errs,(int)p->scb->ovrn_errs,(int)p->scb->rus,(int)p->scb->cus);
drivers/net/ethernet/i825xx/sun3_82586.c
872
printk("r");
drivers/net/ethernet/i825xx/sun3_82586.c
894
printk("%s: Receive-Unit restarted. Status: %04x\n",dev->name,p->scb->rus);
drivers/net/ethernet/i825xx/sun3_82586.c
908
printk("X");
drivers/net/ethernet/i825xx/sun3_82586.c
912
printk("%s: strange .. xmit-int without a 'COMPLETE'\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
923
printk("%s: late collision detected.\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
928
printk("%s: no carrier detected.\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
931
printk("%s: loss of CTS detected.\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
934
printk("%s: DMA underrun detected.\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
937
printk("%s: Max. collisions exceeded.\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
973
printk("%s: strange ... timeout with CU active?!?\n",dev->name);
drivers/net/ethernet/i825xx/sun3_82586.c
974
printk("%s: X0: %04x N0: %04x N1: %04x %d\n",dev->name,(int)swab16(p->xmit_cmds[0]->cmd_status),(int)swab16(p->nop_cmds[0]->cmd_status),(int)swab16(p->nop_cmds[1]->cmd_status),(int)p->nop_point);
drivers/net/ethernet/i825xx/sun3_82586.c
989
printk("%s: xmitter timed out, try to restart! stat: %02x\n",dev->name,p->scb->cus);
drivers/net/ethernet/i825xx/sun3_82586.c
990
printk("%s: command-stats: %04x\n", dev->name, swab16(p->xmit_cmds[0]->cmd_status));
drivers/net/ethernet/i825xx/sun3_82586.c
991
printk("%s: check, whether you set the right interrupt number!\n",dev->name);
drivers/net/ethernet/ibm/emac/core.c
1219
printk(KERN_INFO "%s: link is up, %d %s%s\n",
drivers/net/ethernet/ibm/emac/core.c
1225
printk(KERN_INFO "%s: link is down\n", dev->ndev->name);
drivers/net/ethernet/ibm/emac/core.c
1239
printk(KERN_ERR "%s: failed to allocate RX ring\n",
drivers/net/ethernet/ibm/emac/core.c
125
printk(KERN_ERR "%pOF: %s\n", dev->ofdev->dev.of_node, error);
drivers/net/ethernet/ibm/emac/core.c
2769
printk(KERN_WARNING "%pOF: can't find PHY!\n", np);
drivers/net/ethernet/ibm/emac/core.c
2895
printk(KERN_ERR "%pOF: Flow control not disabled!\n",
drivers/net/ethernet/ibm/emac/core.c
2919
printk(KERN_ERR "%pOF: TAH support not enabled !\n", np);
drivers/net/ethernet/ibm/emac/core.c
2928
printk(KERN_ERR "%pOF: ZMII support not enabled !\n", np);
drivers/net/ethernet/ibm/emac/core.c
2937
printk(KERN_ERR "%pOF: RGMII support not enabled !\n", np);
drivers/net/ethernet/ibm/emac/core.c
3085
printk(KERN_ERR "%pOF: failed to register with mal %pOF!\n",
drivers/net/ethernet/ibm/emac/core.c
3162
printk(KERN_ERR "%pOF: failed to register net device (%d)!\n",
drivers/net/ethernet/ibm/emac/core.c
3173
printk(KERN_INFO "%s: EMAC-%d %pOF, MAC %pM\n",
drivers/net/ethernet/ibm/emac/core.c
3177
printk(KERN_NOTICE "%s: in SGMII mode\n", ndev->name);
drivers/net/ethernet/ibm/emac/core.c
3180
printk("%s: found %s PHY (0x%02x)\n", ndev->name,
drivers/net/ethernet/ibm/emac/core.c
3303
printk(KERN_INFO DRV_DESC ", version " DRV_VERSION "\n");
drivers/net/ethernet/ibm/emac/core.c
478
printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n",
drivers/net/ethernet/ibm/emac/core.c
490
printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n",
drivers/net/ethernet/ibm/emac/core.c
518
printk(KERN_WARNING "%s: Unknown Tx FIFO size %d\n",
drivers/net/ethernet/ibm/emac/core.c
536
printk(KERN_WARNING "%s: Unknown Rx FIFO size %d\n",
drivers/net/ethernet/ibm/emac/debug.h
29
printk(KERN_DEBUG #name "%pOF: " fmt, d->ofdev->dev.of_node, ## arg)
drivers/net/ethernet/ibm/emac/mal.c
242
printk(KERN_ERR
drivers/net/ethernet/ibm/emac/mal.c
253
printk(KERN_ERR
drivers/net/ethernet/ibm/emac/mal.c
322
printk(KERN_ERR
drivers/net/ethernet/ibm/emac/mal.c
47
printk(KERN_WARNING "mal%d: COMMAC channels conflict!\n",
drivers/net/ethernet/ibm/emac/mal.c
473
printk(KERN_ERR "mal%d: reset timeout\n", mal->index);
drivers/net/ethernet/ibm/emac/mal.c
540
printk(KERN_ERR
drivers/net/ethernet/ibm/emac/mal.c
549
printk(KERN_ERR
drivers/net/ethernet/ibm/emac/mal.c
558
printk(KERN_ERR
drivers/net/ethernet/ibm/emac/mal.c
564
printk(KERN_ERR
drivers/net/ethernet/ibm/emac/mal.c
575
printk(KERN_ERR "%pOF: Support for 405EZ not enabled!\n",
drivers/net/ethernet/ibm/emac/mal.c
688
printk(KERN_INFO
drivers/net/ethernet/ibm/emac/mal.c
90
printk(KERN_WARNING
drivers/net/ethernet/ibm/emac/rgmii.c
253
printk(KERN_INFO
drivers/net/ethernet/ibm/emac/rgmii.c
89
printk(KERN_ERR "%pOF: unsupported settings !\n",
drivers/net/ethernet/ibm/emac/rgmii.c
99
printk(KERN_NOTICE "%pOF: input %d in %s mode\n",
drivers/net/ethernet/ibm/emac/tah.c
114
printk(KERN_INFO "TAH %pOF initialized\n", ofdev->dev.of_node);
drivers/net/ethernet/ibm/emac/tah.c
58
printk(KERN_ERR "%pOF: reset timeout\n", ofdev->dev.of_node);
drivers/net/ethernet/ibm/emac/zmii.c
121
printk(KERN_NOTICE "%pOF: bridge in %s mode\n",
drivers/net/ethernet/ibm/emac/zmii.c
127
printk(KERN_ERR
drivers/net/ethernet/ibm/emac/zmii.c
261
printk(KERN_INFO "ZMII %pOF initialized\n", ofdev->dev.of_node);
drivers/net/ethernet/ibm/ibmveth.c
2161
printk(KERN_DEBUG "%s: %s %s\n", ibmveth_driver_name,
drivers/net/ethernet/jme.h
1189
printk(KERN_DEBUG "%s: %-20s %08x@%s\n", jme->dev->name,
drivers/net/ethernet/jme.h
34
printk(KERN_DEBUG "%s: " fmt, (priv)->dev->name, ##args)
drivers/net/ethernet/jme.h
39
printk(KERN_DEBUG "%s: " fmt, (priv)->dev->name, ##args); \
drivers/net/ethernet/korina.c
1084
printk(KERN_ERR "%s: descriptor allocation failed\n", dev->name);
drivers/net/ethernet/korina.c
1173
printk(KERN_ERR "%s: cannot restart device\n", dev->name);
drivers/net/ethernet/korina.c
1206
printk(KERN_ERR "%s: cannot open device\n", dev->name);
drivers/net/ethernet/korina.c
1215
printk(KERN_ERR "%s: unable to get Rx DMA IRQ %d\n",
drivers/net/ethernet/korina.c
1222
printk(KERN_ERR "%s: unable to get Tx DMA IRQ %d\n",
drivers/net/ethernet/korina.c
1320
printk(KERN_ERR DRV_NAME ": cannot remap registers\n");
drivers/net/ethernet/korina.c
1327
printk(KERN_ERR DRV_NAME ": cannot remap Rx DMA registers\n");
drivers/net/ethernet/korina.c
1334
printk(KERN_ERR DRV_NAME ": cannot remap Tx DMA registers\n");
drivers/net/ethernet/korina.c
1371
printk(KERN_ERR DRV_NAME
drivers/net/ethernet/korina.c
1379
printk(KERN_INFO "%s: " DRV_NAME "-" DRV_VERSION " " DRV_RELDATE "\n",
drivers/net/ethernet/korina.c
587
printk(KERN_ERR "%s: DMA error\n", dev->name);
drivers/net/ethernet/korina.c
787
printk(KERN_ERR "%s: split tx ignored\n",
drivers/net/ethernet/korina.c
877
printk(KERN_ERR "%s: DMA error\n", dev->name);
drivers/net/ethernet/marvell/pxa168_eth.c
1395
printk(KERN_NOTICE "PXA168 10/100 Ethernet Driver\n");
drivers/net/ethernet/mellanox/mlx4/en_main.c
92
printk("%s%s: %s: %pV",
drivers/net/ethernet/mellanox/mlx4/en_main.c
95
printk("%s%s: %s: Port %d: %pV",
drivers/net/ethernet/micrel/ks8842.c
588
printk(KERN_ERR DRV_NAME": Failed to start RX DMA: %d\n", err);
drivers/net/ethernet/micrel/ks8842.c
986
printk(KERN_WARNING DRV_NAME
drivers/net/ethernet/microchip/enc28j60.c
892
printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len);
drivers/net/ethernet/natsemi/jazzsonic.c
80
printk(KERN_ERR "%s: unable to get IRQ %d.\n",
drivers/net/ethernet/natsemi/macsonic.c
123
printk(KERN_ERR "%s: unable to get IRQ %d.\n",
drivers/net/ethernet/natsemi/macsonic.c
135
printk(KERN_ERR "%s: unable to get IRQ %d.\n",
drivers/net/ethernet/natsemi/macsonic.c
236
printk(KERN_WARNING "macsonic: MAC address in PROM seems "
drivers/net/ethernet/natsemi/macsonic.c
239
printk(KERN_WARNING "macsonic: cannot read MAC address from "
drivers/net/ethernet/natsemi/macsonic.c
264
printk(KERN_WARNING "macsonic: MAC address in CAM entry 15 "
drivers/net/ethernet/natsemi/macsonic.c
450
printk(KERN_ERR "macsonic: WTF, id is %d\n", id);
drivers/net/ethernet/natsemi/natsemi.c
1238
printk(KERN_INFO
drivers/net/ethernet/natsemi/natsemi.c
1242
printk(KERN_INFO
drivers/net/ethernet/natsemi/natsemi.c
1267
printk(KERN_INFO "%s: switching to external transceiver.\n",
drivers/net/ethernet/natsemi/natsemi.c
1302
printk(KERN_INFO "%s: switching to internal transceiver.\n",
drivers/net/ethernet/natsemi/natsemi.c
1323
printk(KERN_INFO
drivers/net/ethernet/natsemi/natsemi.c
1365
printk(KERN_INFO "natsemi %s: found external phy %08x at address %d.\n",
drivers/net/ethernet/natsemi/natsemi.c
1428
printk(KERN_WARNING "%s: reset did not complete in %d usec.\n",
drivers/net/ethernet/natsemi/natsemi.c
1431
printk(KERN_DEBUG "%s: reset completed in %d usec.\n",
drivers/net/ethernet/natsemi/natsemi.c
1478
printk(KERN_WARNING "%s: RX reset did not complete in %d usec.\n",
drivers/net/ethernet/natsemi/natsemi.c
1481
printk(KERN_WARNING "%s: RX reset took %d usec.\n",
drivers/net/ethernet/natsemi/natsemi.c
1499
printk(KERN_WARNING "natsemi %s: EEPROM did not reload in %d usec.\n",
drivers/net/ethernet/natsemi/natsemi.c
1502
printk(KERN_DEBUG "natsemi %s: EEPROM reloaded in %d usec.\n",
drivers/net/ethernet/natsemi/natsemi.c
1520
printk(KERN_WARNING "%s: Tx/Rx process did not stop in %d usec.\n",
drivers/net/ethernet/natsemi/natsemi.c
1523
printk(KERN_DEBUG "%s: Tx/Rx process stopped in %d usec.\n",
drivers/net/ethernet/natsemi/natsemi.c
1542
printk(KERN_DEBUG "%s: netdev_open() irq %d.\n",
drivers/net/ethernet/natsemi/natsemi.c
1567
printk(KERN_DEBUG "%s: Done netdev_open(), status: %#08x.\n",
drivers/net/ethernet/natsemi/natsemi.c
1663
printk(KERN_NOTICE "%s: link down.\n",
drivers/net/ethernet/natsemi/natsemi.c
1672
printk(KERN_NOTICE "%s: link up.\n", dev->name);
drivers/net/ethernet/natsemi/natsemi.c
1692
printk(KERN_INFO
drivers/net/ethernet/natsemi/natsemi.c
1759
printk(KERN_NOTICE "%s: Wake-up event %#08x\n",
drivers/net/ethernet/natsemi/natsemi.c
1799
printk(KERN_DEBUG "%s: Media selection timer tick.\n",
drivers/net/ethernet/natsemi/natsemi.c
1815
printk(KERN_NOTICE "%s: possible phy reset: "
drivers/net/ethernet/natsemi/natsemi.c
1864
printk(KERN_DEBUG " Tx ring at %p:\n", np->tx_ring);
drivers/net/ethernet/natsemi/natsemi.c
1866
printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n",
drivers/net/ethernet/natsemi/natsemi.c
1871
printk(KERN_DEBUG " Rx ring %p:\n", np->rx_ring);
drivers/net/ethernet/natsemi/natsemi.c
1873
printk(KERN_DEBUG " #%d desc. %#08x %#08x %#08x.\n",
drivers/net/ethernet/natsemi/natsemi.c
1891
printk(KERN_WARNING
drivers/net/ethernet/natsemi/natsemi.c
1901
printk(KERN_WARNING
drivers/net/ethernet/natsemi/natsemi.c
1953
printk(KERN_WARNING "%s: going OOM.\n", dev->name);
drivers/net/ethernet/natsemi/natsemi.c
2133
printk(KERN_DEBUG "%s: Transmit frame #%d queued in slot %d.\n",
drivers/net/ethernet/natsemi/natsemi.c
2148
printk(KERN_DEBUG
drivers/net/ethernet/natsemi/natsemi.c
2201
printk(KERN_DEBUG
drivers/net/ethernet/natsemi/natsemi.c
2213
printk(KERN_WARNING
drivers/net/ethernet/natsemi/natsemi.c
2233
printk(KERN_DEBUG
drivers/net/ethernet/natsemi/natsemi.c
2290
printk(KERN_DEBUG
drivers/net/ethernet/natsemi/natsemi.c
2307
printk(KERN_WARNING
drivers/net/ethernet/natsemi/natsemi.c
2404
printk(KERN_INFO
drivers/net/ethernet/natsemi/natsemi.c
2421
printk(KERN_NOTICE
drivers/net/ethernet/natsemi/natsemi.c
2426
printk(KERN_NOTICE
drivers/net/ethernet/natsemi/natsemi.c
2434
printk(KERN_NOTICE "%s: Link wake-up event %#08x\n",
drivers/net/ethernet/natsemi/natsemi.c
2439
printk(KERN_NOTICE "%s: Rx status FIFO overrun\n",
drivers/net/ethernet/natsemi/natsemi.c
2447
printk(KERN_NOTICE "%s: PCI error %#08x\n", dev->name,
drivers/net/ethernet/natsemi/natsemi.c
3037
printk(KERN_WARNING
drivers/net/ethernet/natsemi/natsemi.c
3130
printk(KERN_INFO "%s: remaining active for wake-on-lan\n",
drivers/net/ethernet/natsemi/natsemi.c
3164
printk(KERN_DEBUG
drivers/net/ethernet/natsemi/natsemi.c
3168
printk(KERN_DEBUG
drivers/net/ethernet/natsemi/natsemi.c
3370
printk(version);
drivers/net/ethernet/natsemi/natsemi.c
766
printk(KERN_INFO "natsemi %s: Transceiver default autonegotiation %s "
drivers/net/ethernet/natsemi/natsemi.c
779
printk(KERN_INFO
drivers/net/ethernet/natsemi/natsemi.c
820
printk(version);
drivers/net/ethernet/natsemi/natsemi.c
924
printk(KERN_INFO
drivers/net/ethernet/natsemi/natsemi.c
948
printk(KERN_INFO "natsemi %s: silicon revision %#04x.\n",
drivers/net/ethernet/natsemi/natsemi.c
959
printk(KERN_INFO "natsemi %s: %s at %#08llx "
drivers/net/ethernet/natsemi/natsemi.c
965
printk(", port TP.\n");
drivers/net/ethernet/natsemi/natsemi.c
967
printk(", port MII, ignoring PHY\n");
drivers/net/ethernet/natsemi/natsemi.c
969
printk(", port MII, phy ad %d.\n", np->phy_addr_external);
drivers/net/ethernet/natsemi/ns83820.c
1318
printk(KERN_INFO "%s: Duplex set via ethtool\n",
drivers/net/ethernet/natsemi/ns83820.c
1331
printk(KERN_INFO "%s: autoneg enabled via ethtool\n",
drivers/net/ethernet/natsemi/ns83820.c
1338
printk(KERN_INFO "%s: autoneg %s via ethtool\n", ndev->name,
drivers/net/ethernet/natsemi/ns83820.c
1456
printk(KERN_ALERT "%s: BUG -- txdp out of range\n", ndev->name);
drivers/net/ethernet/natsemi/ns83820.c
1562
printk(KERN_INFO "%s: tx_timeout: tx_done_idx=%d free_idx=%d cmdsts=%08x\n",
drivers/net/ethernet/natsemi/ns83820.c
1570
printk("irq: %08x imr: %08x\n", isr, dev->IMR_cache);
drivers/net/ethernet/natsemi/ns83820.c
1580
printk(KERN_INFO "%s: after: tx_done_idx=%d free_idx=%d cmdsts=%08x\n",
drivers/net/ethernet/natsemi/ns83820.c
1593
printk("ns83820_tx_watch: %u %u %d\n",
drivers/net/ethernet/natsemi/ns83820.c
1600
printk(KERN_DEBUG "%s: ns83820_tx_watch: %u %u %d\n",
drivers/net/ethernet/natsemi/ns83820.c
1727
printk(KERN_INFO "%s: %s failed! (0x%08x & 0x%08x)\n",
drivers/net/ethernet/natsemi/ns83820.c
1730
printk(KERN_INFO "%s: run_bist %s timed out! (%08x)\n",
drivers/net/ethernet/natsemi/ns83820.c
1982
printk("%s: ns83820.c: 0x22c: %08x, subsystem: %04x:%04x\n",
drivers/net/ethernet/natsemi/ns83820.c
2005
printk(KERN_INFO "%s: detected 64 bit PCI data bus.\n",
drivers/net/ethernet/natsemi/ns83820.c
2009
printk(KERN_INFO "%s: EEPROM did not enable 64 bit bus. Disabled.\n",
drivers/net/ethernet/natsemi/ns83820.c
2036
printk(KERN_INFO "%s: enabling optical transceiver\n",
drivers/net/ethernet/natsemi/ns83820.c
2058
printk(KERN_INFO "%s: resetting phy\n", ndev->name);
drivers/net/ethernet/natsemi/ns83820.c
2155
printk(KERN_INFO "%s: using 64 bit addressing.\n",
drivers/net/ethernet/natsemi/ns83820.c
2160
printk(KERN_INFO "%s: ns83820 v" VERSION ": DP83820 v%u.%u: %pM io=0x%08lx irq=%d f=%s\n",
drivers/net/ethernet/natsemi/ns83820.c
2174
printk(KERN_INFO "ns83820: unable to register netdev: %d\n", err);
drivers/net/ethernet/natsemi/ns83820.c
2240
printk(KERN_INFO "ns83820.c: National Semiconductor DP83820 10/100/1000 driver.\n");
drivers/net/ethernet/natsemi/ns83820.c
467
printk(KERN_DEBUG "%s: uh-oh: next_rx == next_empty???\n",
drivers/net/ethernet/natsemi/ns83820.c
694
printk(KERN_INFO "%s: link now %s mbps, %s duplex and up.\n",
drivers/net/ethernet/natsemi/ns83820.c
701
printk(KERN_INFO "%s: link now down.\n", ndev->name);
drivers/net/ethernet/natsemi/ns83820.c
812
printk(KERN_DEBUG "%s: BAD\n", ndev->name);
drivers/net/ethernet/natsemi/sonic.c
113
printk(KERN_ERR "%s: couldn't allocate receive buffers\n",
drivers/net/ethernet/natsemi/sonic.c
136
printk(KERN_ERR "%s: couldn't map rx DMA buffers\n",
drivers/net/ethernet/natsemi/sonic.c
469
printk(KERN_ERR "%s: Bus retry occurred! Device interrupt disabled.\n",
drivers/net/ethernet/natsemi/xtsonic.c
93
printk(KERN_ERR "%s: unable to get IRQ %d.\n",
drivers/net/ethernet/pasemi/pasemi_mac.c
1017
printk("Unsupported speed %d\n", dev->phydev->speed);
drivers/net/ethernet/pasemi/pasemi_mac.c
1031
printk(KERN_INFO "%s: Link is up at %d Mbps, %s duplex.\n",
drivers/net/ethernet/pasemi/pasemi_mac.c
1053
printk(KERN_ERR "%s: Could not attach to phy\n", dev->name);
drivers/net/ethernet/pasemi/pasemi_mac.c
1298
printk(KERN_DEBUG "pasemi_mac: rcmdsta error: 0x%08x\n", sta);
drivers/net/ethernet/pasemi/pasemi_mac.c
1305
printk(KERN_DEBUG "pasemi_mac: ccmdsta error: 0x%08x\n", sta);
drivers/net/ethernet/pasemi/pasemi_mac.c
1310
printk(KERN_DEBUG "pasemi_mac: tcmdsta error: 0x%08x\n", sta);
drivers/net/ethernet/pasemi/pasemi_mac.c
1773
printk(KERN_INFO "%s: PA Semi %s: intf %d, hw addr %pM\n",
drivers/net/ethernet/pasemi/pasemi_mac.c
665
printk(KERN_ERR "pasemi_mac: rx error. macrx %016llx, rx status %llx\n",
drivers/net/ethernet/pasemi/pasemi_mac.c
668
printk(KERN_ERR "pasemi_mac: rcmdsta %08x ccmdsta %08x\n",
drivers/net/ethernet/pasemi/pasemi_mac.c
683
printk(KERN_ERR "pasemi_mac: tx error. mactx 0x%016llx, "\
drivers/net/ethernet/pasemi/pasemi_mac.c
686
printk(KERN_ERR "pasemi_mac: tcmdsta 0x%08x\n", cmdsta);
drivers/net/ethernet/pasemi/pasemi_mac.c
984
printk(KERN_INFO "%s: Link is down.\n", dev->name);
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
354
printk(KERN_WARNING
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
411
printk(KERN_WARNING
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
491
printk(KERN_WARNING
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
516
printk(KERN_WARNING
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
58
printk(KERN_ERR "%s: card response timeout.\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c
65
printk(KERN_ERR "%s: failed card response code:0x%x\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
210
printk(KERN_ERR "netxen-nic: Unsupported board model %d\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
426
printk(KERN_INFO "%s: setting %s ring size %d instead of %d\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
517
printk(KERN_ERR"%s: Unknown board type: %x\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_ethtool.c
595
printk(KERN_ERR "%s: Unknown board type: %x\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
761
printk(KERN_ERR "ERROR. Could not send "
drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
788
printk(KERN_ERR "ERROR. Could not send "
drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
816
printk(KERN_ERR "ERROR. Could not send "
drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
868
printk(KERN_ERR "%s: could not configure RSS\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
892
printk(KERN_ERR "%s: could not notify %s IP 0x%x request\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
914
printk(KERN_ERR "%s: could not configure link notification\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_hw.c
941
printk(KERN_ERR "%s: could not cleanup lro flows\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
1402
printk(KERN_INFO "%s: unsupported cable: OUI 0x%x, length %d\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
1405
printk(KERN_INFO "%s: unsupported cable length %d\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
351
printk("Error waiting for rom done\n");
drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
430
printk(KERN_ERR "%s: ERROR Reading crb_init area: "
drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
439
printk(KERN_ERR "%s: ERROR Reading crb_init area: "
drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
448
printk(KERN_ERR "%s:n=0x%x Error! NetXen card flash not"
drivers/net/ethernet/qlogic/netxen/netxen_nic_init.c
473
printk(KERN_ERR"CRB init value out of range %x\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
1101
printk(KERN_ERR "%s: Failed to initialize port %d\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
1220
printk(KERN_ERR "%s: Error in setting sw resources\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
1227
printk(KERN_ERR "%s: Error in setting hw resources\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
2140
printk(KERN_ALERT
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
2147
printk(KERN_ALERT
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
2155
printk(KERN_INFO
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
2170
printk(KERN_INFO "%s: %s NIC Link is down\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
2179
printk(KERN_INFO "%s: %s NIC Link is up\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
3450
printk(KERN_INFO "%s\n", netxen_nic_driver_string);
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
787
printk(KERN_ERR "%s: doorbell is disabled\n",
drivers/net/ethernet/qlogic/netxen/netxen_nic_main.c
795
printk(KERN_ERR "%s: Failed to allocate doorbell map.",
drivers/net/ethernet/qlogic/qlcnic/qlcnic.h
2299
printk(KERN_INFO "%s: %s: " _fmt, \
drivers/net/ethernet/qlogic/qlcnic/qlcnic_ethtool.c
659
printk(KERN_INFO "%s: setting %s ring size %d instead of %d\n",
drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c
4216
printk(KERN_INFO "%s\n", qlcnic_driver_string);
drivers/net/ethernet/seeq/ether3.c
124
printk("%s: setbuffer broken\n", dev->name);
drivers/net/ethernet/seeq/ether3.c
214
printk(KERN_ERR "ether3: Couldn't read a valid MAC address from card.\n");
drivers/net/ethernet/seeq/ether3.c
245
printk("%s: RAM failed with (%02X instead of %02X) at 0x%04X",
drivers/net/ethernet/seeq/ether3.c
254
printk(" - 0x%04X\n", i - 1);
drivers/net/ethernet/seeq/ether3.c
255
printk("\n");
drivers/net/ethernet/seeq/ether3.c
261
printk(" - 0xffff\n");
drivers/net/ethernet/seeq/ether3.c
363
printk(KERN_DEBUG "ether3_probe: write8 [%02X:%02X]", write_high, write_low);
drivers/net/ethernet/seeq/ether3.c
371
printk(", read8 [%02X:%02X]\n", read_high, read_low);
drivers/net/ethernet/seeq/ether3.c
384
printk(KERN_DEBUG "ether3_probe: write16 [%04X], read16 [%04X]\n", val, read_val);
drivers/net/ethernet/seeq/ether3.c
460
printk(KERN_ERR "%s: transmit timed out, network cable problem?\n", dev->name);
drivers/net/ethernet/seeq/ether3.c
461
printk(KERN_ERR "%s: state: { status=%04X cfg1=%04X cfg2=%04X }\n", dev->name,
drivers/net/ethernet/seeq/ether3.c
463
printk(KERN_ERR "%s: { rpr=%04X rea=%04X tpr=%04X }\n", dev->name,
drivers/net/ethernet/seeq/ether3.c
465
printk(KERN_ERR "%s: tx head=%X tx tail=%X\n", dev->name,
drivers/net/ethernet/seeq/ether3.c
468
printk(KERN_ERR "%s: packet status = %08X\n", dev->name, ether3_readlong(dev));
drivers/net/ethernet/seeq/ether3.c
554
printk("eth3irq: %d ", irq);
drivers/net/ethernet/seeq/ether3.c
573
printk("done\n");
drivers/net/ethernet/seeq/ether3.c
613
printk("%s: bad next pointer @%04X: ", dev->name, priv(dev)->rx_head);
drivers/net/ethernet/seeq/ether3.c
614
printk("%02X %02X %02X %02X ", next_ptr >> 8, next_ptr & 255, status & 255, status >> 8);
drivers/net/ethernet/seeq/ether3.c
615
printk("%pM %pM\n", addrs + 2, addrs + 8);
drivers/net/ethernet/seeq/ether3.c
733
printk(KERN_INFO "%s", version);
drivers/net/ethernet/seeq/ether3.c
806
printk(KERN_ERR "%s: unable to identify bus width\n", dev->name);
drivers/net/ethernet/seeq/ether3.c
811
printk(KERN_ERR "%s: %s found, but is an unsupported "
drivers/net/ethernet/seeq/ether3.c
832
printk("%s: %s in slot %d, %pM\n",
drivers/net/ethernet/seeq/sgiseeq.c
260
printk("RING DUMP:\n");
drivers/net/ethernet/seeq/sgiseeq.c
262
printk("RX [%d]: @(%p) [%08x,%08x,%08x] ",
drivers/net/ethernet/seeq/sgiseeq.c
266
printk("-- [%d]: @(%p) [%08x,%08x,%08x]\n",
drivers/net/ethernet/seeq/sgiseeq.c
271
printk("TX [%d]: @(%p) [%08x,%08x,%08x] ",
drivers/net/ethernet/seeq/sgiseeq.c
275
printk("-- [%d]: @(%p) [%08x,%08x,%08x]\n",
drivers/net/ethernet/seeq/sgiseeq.c
279
printk("INFO: [rx_new = %d rx_old=%d] [tx_new = %d tx_old = %d]\n",
drivers/net/ethernet/seeq/sgiseeq.c
281
printk("RREGS: rx_cbptr[%08x] rx_ndptr[%08x] rx_ctrl[%08x]\n",
drivers/net/ethernet/seeq/sgiseeq.c
283
printk("TREGS: tx_cbptr[%08x] tx_ndptr[%08x] tx_ctrl[%08x]\n",
drivers/net/ethernet/seeq/sgiseeq.c
540
printk(KERN_ERR "Seeq8003: Can't get irq %d\n", dev->irq);
drivers/net/ethernet/seeq/sgiseeq.c
658
printk(KERN_NOTICE "%s: transmit timed out, resetting\n", dev->name);
drivers/net/ethernet/seeq/sgiseeq.c
754
printk(KERN_ERR "Sgiseeq: Page alloc failed, aborting.\n");
drivers/net/ethernet/seeq/sgiseeq.c
802
printk(KERN_ERR "Sgiseeq: Cannot register net device, "
drivers/net/ethernet/seeq/sgiseeq.c
808
printk(KERN_INFO "%s: %s %pM\n", dev->name, sgiseeqstr, dev->dev_addr);
drivers/net/ethernet/sfc/efx.c
1415
printk(KERN_INFO "Solarflare NET driver\n");
drivers/net/ethernet/sfc/efx.c
1447
printk(KERN_INFO "Solarflare NET driver unloading\n");
drivers/net/ethernet/sfc/efx_common.c
113
printk(KERN_ERR "Failed to create reset workqueue\n");
drivers/net/ethernet/sfc/falcon/efx.c
3160
printk(KERN_INFO "Solarflare Falcon driver v" EF4_DRIVER_VERSION "\n");
drivers/net/ethernet/sfc/falcon/efx.c
3188
printk(KERN_INFO "Solarflare Falcon driver unloading\n");
drivers/net/ethernet/sfc/siena/efx_common.c
117
printk(KERN_ERR "Failed to create reset workqueue\n");
drivers/net/ethernet/sgi/meth.c
335
printk(KERN_ERR "%s: Can't get irq %d\n", dev->name, dev->irq);
drivers/net/ethernet/sgi/meth.c
40
#define DPRINTK(str,args...) printk(KERN_DEBUG "meth: %s: " str, __func__ , ## args)
drivers/net/ethernet/sgi/meth.c
406
printk(KERN_DEBUG "%s: bogus packet size: %ld, status=%#2Lx.\n",
drivers/net/ethernet/sgi/meth.c
437
printk(KERN_WARNING "meth: RX error: status=0x%016lx\n",status);
drivers/net/ethernet/sgi/meth.c
439
printk(KERN_WARNING "Receive Code Violation\n");
drivers/net/ethernet/sgi/meth.c
441
printk(KERN_WARNING "CRC error\n");
drivers/net/ethernet/sgi/meth.c
443
printk(KERN_WARNING "Invalid Preamble Context\n");
drivers/net/ethernet/sgi/meth.c
445
printk(KERN_WARNING "Long Event Seen...\n");
drivers/net/ethernet/sgi/meth.c
447
printk(KERN_WARNING "Bad Packet\n");
drivers/net/ethernet/sgi/meth.c
449
printk(KERN_WARNING "Carrier Event Seen\n");
drivers/net/ethernet/sgi/meth.c
505
printk(" SUCCESS");
drivers/net/ethernet/sgi/meth.c
507
printk(" TOOLONG");
drivers/net/ethernet/sgi/meth.c
509
printk(" UNDERRUN");
drivers/net/ethernet/sgi/meth.c
511
printk(" EXCCOLL");
drivers/net/ethernet/sgi/meth.c
513
printk(" DEFER");
drivers/net/ethernet/sgi/meth.c
515
printk(" LATECOLL");
drivers/net/ethernet/sgi/meth.c
516
printk(" >\n");
drivers/net/ethernet/sgi/meth.c
544
printk(KERN_WARNING "meth: error status: 0x%08x\n",status);
drivers/net/ethernet/sgi/meth.c
547
printk(KERN_WARNING "meth: link failure\n");
drivers/net/ethernet/sgi/meth.c
550
printk(KERN_WARNING "meth: memory error\n");
drivers/net/ethernet/sgi/meth.c
552
printk(KERN_WARNING "meth: aborted\n");
drivers/net/ethernet/sgi/meth.c
554
printk(KERN_WARNING "meth: Rx overflow\n");
drivers/net/ethernet/sgi/meth.c
556
printk(KERN_WARNING "meth: Rx underflow\n");
drivers/net/ethernet/sgi/meth.c
714
printk(KERN_DEBUG "TX full: stopping\n");
drivers/net/ethernet/sgi/meth.c
735
printk(KERN_WARNING "%s: transmit timed out\n", dev->name);
drivers/net/ethernet/sgi/meth.c
852
printk(KERN_INFO "%s: SGI MACE Ethernet rev. %d\n",
drivers/net/ethernet/silan/sc92031.c
1474
printk(KERN_INFO "%s: SC92031 at 0x%lx, %pM, IRQ %d\n", dev->name,
drivers/net/ethernet/silan/sc92031.c
532
printk(KERN_INFO "%s: link up, %sMbps, %s-duplex\n",
drivers/net/ethernet/silan/sc92031.c
545
printk(KERN_INFO "%s: link down\n", dev->name);
drivers/net/ethernet/silan/sc92031.c
751
printk(KERN_ERR "%s: rx packets length > rx buffer\n",
drivers/net/ethernet/silan/sc92031.c
782
printk(KERN_ERR "%s: rx_len is too small\n", dev->name);
drivers/net/ethernet/silan/sc92031.c
791
printk(KERN_ERR "%s: Couldn't allocate a skb_buff for a packet of size %u\n",
drivers/net/ethernet/sis/sis900.c
1103
printk(KERN_DEBUG "%s: Receive Filter Address[%d]=%x\n",
drivers/net/ethernet/sis/sis900.c
1141
printk(KERN_DEBUG "%s: TX descriptor register loaded with: %8.8x\n",
drivers/net/ethernet/sis/sis900.c
1202
printk(KERN_DEBUG "%s: RX descriptor register loaded with: %8.8x\n",
drivers/net/ethernet/sis/sis900.c
1339
printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
drivers/net/ethernet/sis/sis900.c
1459
printk(KERN_INFO "%s: Media Link Off\n", net_dev->name);
drivers/net/ethernet/sis/sis900.c
1522
printk(KERN_INFO "%s: Media Link On %s %s-duplex\n",
drivers/net/ethernet/sis/sis900.c
1547
printk(KERN_INFO "%s: Transmit timeout, status %8.8x %8.8x\n",
drivers/net/ethernet/sis/sis900.c
1651
printk(KERN_DEBUG "%s: Queued Tx packet at %p size %d "
drivers/net/ethernet/sis/sis900.c
1698
printk(KERN_INFO "%s: Abnormal interrupt, "
drivers/net/ethernet/sis/sis900.c
1704
printk(KERN_INFO "%s: Too much work at interrupt, "
drivers/net/ethernet/sis/sis900.c
1712
printk(KERN_DEBUG "%s: exiting interrupt, "
drivers/net/ethernet/sis/sis900.c
1739
printk(KERN_DEBUG "sis900_rx, cur_rx:%4.4d, dirty_rx:%4.4d "
drivers/net/ethernet/sis/sis900.c
1763
printk(KERN_DEBUG "%s: Corrupted packet "
drivers/net/ethernet/sis/sis900.c
1804
printk(KERN_WARNING "%s: NULL pointer "
drivers/net/ethernet/sis/sis900.c
1913
printk(KERN_DEBUG "%s: Transmit "
drivers/net/ethernet/sis/sis900.c
2093
printk(KERN_DEBUG "%s: Wake on LAN disabled\n", net_dev->name);
drivers/net/ethernet/sis/sis900.c
2112
printk(KERN_DEBUG "%s: Wake on LAN enabled\n", net_dev->name);
drivers/net/ethernet/sis/sis900.c
264
printk (KERN_WARNING "%s: Error EEPROM read %x\n",
drivers/net/ethernet/sis/sis900.c
299
printk(KERN_WARNING "%s: Can not find ISA bridge\n",
drivers/net/ethernet/sis/sis900.c
447
printk(KERN_ERR "sis900.c: architecture does not support "
drivers/net/ethernet/sis/sis900.c
517
printk(KERN_DEBUG "%s: detected revision %2.2x, "
drivers/net/ethernet/sis/sis900.c
533
printk(KERN_WARNING "%s: Unreadable or invalid MAC address,"
drivers/net/ethernet/sis/sis900.c
543
printk(KERN_WARNING "%s: Error probing MII device.\n",
drivers/net/ethernet/sis/sis900.c
561
printk(KERN_INFO "%s: %s at 0x%p, IRQ %d, %pM\n",
drivers/net/ethernet/sis/sis900.c
568
printk(KERN_INFO "%s: Wake on LAN only available from suspend to RAM.", net_dev->name);
drivers/net/ethernet/sis/sis900.c
616
printk(KERN_DEBUG "%s: MII at address %d"
drivers/net/ethernet/sis/sis900.c
648
printk(KERN_INFO "%s: %s transceiver found "
drivers/net/ethernet/sis/sis900.c
657
printk(KERN_INFO "%s: Unknown PHY transceiver found at address %d.\n",
drivers/net/ethernet/sis/sis900.c
664
printk(KERN_INFO "%s: No MII transceivers found!\n", dev_name);
drivers/net/ethernet/sis/sis900.c
688
printk(KERN_WARNING "%s: reset phy and link down now\n",
drivers/net/ethernet/sis/sis900.c
757
printk(KERN_INFO "%s: Using transceiver found at address %d as default\n",
drivers/net/ethernet/smsc/smc91x.c
171
printk(KERN_DEBUG);
drivers/net/ethernet/smsc/smc91x.c
180
printk(KERN_DEBUG);
drivers/net/ethernet/sun/cassini.c
3363
printk("MTU limited to %d bytes\n", CAS_MAX_MTU);
drivers/net/ethernet/sun/niu.c
4220
printk(KERN_DEBUG KBUILD_MODNAME ": " "%s() ldg[%p](%d)",
drivers/net/ethernet/sun/sunbmac.c
1086
printk(KERN_INFO "%s", version);
drivers/net/ethernet/sun/sunbmac.c
1103
printk(KERN_ERR "BIGMAC: Cannot map QEC global registers.\n");
drivers/net/ethernet/sun/sunbmac.c
1109
printk(KERN_ERR "BigMAC: AIEEE, QEC is not in BigMAC mode!\n");
drivers/net/ethernet/sun/sunbmac.c
1136
printk(KERN_ERR "BIGMAC: Cannot map QEC channel registers.\n");
drivers/net/ethernet/sun/sunbmac.c
1144
printk(KERN_ERR "BIGMAC: Cannot map BigMAC primary registers.\n");
drivers/net/ethernet/sun/sunbmac.c
1154
printk(KERN_ERR "BIGMAC: Cannot map BigMAC transceiver registers.\n");
drivers/net/ethernet/sun/sunbmac.c
1190
printk(KERN_ERR "BIGMAC: Cannot register device.\n");
drivers/net/ethernet/sun/sunbmac.c
1196
printk(KERN_INFO "%s: BigMAC 100baseT Ethernet %pM\n",
drivers/net/ethernet/sun/sunbmac.c
143
printk(KERN_ERR "BIGMAC: Transmitter will not reset.\n");
drivers/net/ethernet/sun/sunbmac.c
144
printk(KERN_ERR "BIGMAC: tx_cfg is %08x\n",
drivers/net/ethernet/sun/sunbmac.c
158
printk(KERN_ERR "BIGMAC: Receiver will not reset.\n");
drivers/net/ethernet/sun/sunbmac.c
159
printk(KERN_ERR "BIGMAC: rx_cfg is %08x\n",
drivers/net/ethernet/sun/sunbmac.c
287
printk(KERN_ERR "write_tcvr_bit: No transceiver type known!\n");
drivers/net/ethernet/sun/sunbmac.c
309
printk(KERN_ERR "read_tcvr_bit: No transceiver type known!\n");
drivers/net/ethernet/sun/sunbmac.c
331
printk(KERN_ERR "read_tcvr_bit2: No transceiver type known!\n");
drivers/net/ethernet/sun/sunbmac.c
361
printk(KERN_ERR "bigmac_tcvr_read: Whoops, no known transceiver type.\n");
drivers/net/ethernet/sun/sunbmac.c
400
printk(KERN_ERR "bigmac_tcvr_read: Whoops, no known transceiver type.\n");
drivers/net/ethernet/sun/sunbmac.c
484
printk(KERN_ERR "BIGMAC: AIEEE, neither internal nor "
drivers/net/ethernet/sun/sunbmac.c
486
printk(KERN_ERR "BIGMAC: mgmt_pal[%08x] tcvr_pal[%08x]\n",
drivers/net/ethernet/sun/sunbmac.c
513
printk(KERN_ERR "%s: PHY reset failed.\n", bp->dev->name);
drivers/net/ethernet/sun/sunbmac.c
538
printk(KERN_INFO "%s: Link is now up at %s.\n",
drivers/net/ethernet/sun/sunbmac.c
550
printk(KERN_ERR "%s: Link down, cable problem?\n",
drivers/net/ethernet/sun/sunbmac.c
554
printk(KERN_ERR "%s: Error, cannot re-init the "
drivers/net/ethernet/sun/sunbmac.c
567
printk(KERN_ERR "%s: Aieee, link timer is asleep but we got one anyways!\n",
drivers/net/ethernet/sun/sunbmac.c
59
#define DP(x) printk x
drivers/net/ethernet/sun/sunbmac.c
606
printk(KERN_ERR "%s: PHY reset failed.\n", bp->dev->name);
drivers/net/ethernet/sun/sunbmac.c
65
#define DTX(x) printk x
drivers/net/ethernet/sun/sunbmac.c
71
#define DIRQ(x) printk x
drivers/net/ethernet/sun/sunbmac.c
719
printk(KERN_ERR "bigmac_is_medium_rare: ");
drivers/net/ethernet/sun/sunbmac.c
722
printk("QEC_ERROR, ");
drivers/net/ethernet/sun/sunbmac.c
724
printk("QEC_BMAC_ERROR, ");
drivers/net/ethernet/sun/sunbmac.c
728
printk("BMAC_ERROR, ");
drivers/net/ethernet/sun/sunbmac.c
730
printk("TXD_ERROR, ");
drivers/net/ethernet/sun/sunbmac.c
732
printk("TX_LATE_ERROR, ");
drivers/net/ethernet/sun/sunbmac.c
734
printk("TX_PARITY_ERROR, ");
drivers/net/ethernet/sun/sunbmac.c
736
printk("TX_SBUS_ERROR, ");
drivers/net/ethernet/sun/sunbmac.c
739
printk("RX_DROP_ERROR, ");
drivers/net/ethernet/sun/sunbmac.c
742
printk("RX_SMALL_ERROR, ");
drivers/net/ethernet/sun/sunbmac.c
744
printk("RX_LATE_ERROR, ");
drivers/net/ethernet/sun/sunbmac.c
746
printk("RX_PARITY_ERROR, ");
drivers/net/ethernet/sun/sunbmac.c
748
printk("RX_SBUS_ERROR, ");
drivers/net/ethernet/sun/sunbmac.c
751
printk(" RESET\n");
drivers/net/ethernet/sun/sunbmac.c
885
printk(KERN_NOTICE "%s: Memory squeeze, deferring packet.\n", bp->dev->name);
drivers/net/ethernet/sun/sunbmac.c
920
printk(KERN_ERR "BIGMAC: Can't order irq %d to go.\n", dev->irq);
drivers/net/ethernet/sun/sunbmac.c
94
printk(KERN_ERR "BigMAC: Cannot reset the QEC.\n");
drivers/net/ethernet/sun/sungem.c
1082
printk(KERN_DEBUG "%s: tx queued, slot %d, skblen %d\n",
drivers/net/ethernet/sun/sungem.c
245
printk(KERN_DEBUG "%s: mif interrupt\n", gp->dev->name);
drivers/net/ethernet/sun/sungem.c
254
printk(KERN_DEBUG "%s: pcs interrupt, pcs_istat: 0x%x\n",
drivers/net/ethernet/sun/sungem.c
2776
printk("\n");
drivers/net/ethernet/sun/sungem.c
303
printk(KERN_DEBUG "%s: txmac interrupt, txmac_stat: 0x%x\n",
drivers/net/ethernet/sun/sungem.c
457
printk(KERN_DEBUG "%s: rxmac interrupt, rxmac_stat: 0x%x\n",
drivers/net/ethernet/sun/sungem.c
490
printk(KERN_DEBUG "%s: mac interrupt, mac_cstat: 0x%x\n",
drivers/net/ethernet/sun/sungem.c
575
printk(KERN_DEBUG "%s: no buffer for rx frame\n",
drivers/net/ethernet/sun/sungem.c
583
printk(KERN_DEBUG "%s: corrupt rx tag framing\n",
drivers/net/ethernet/sun/sungem.c
637
printk(KERN_DEBUG "%s: tx done, slot %d\n",
drivers/net/ethernet/sun/sungem.c
745
printk(KERN_DEBUG "%s: rx interrupt, done: %d, rx_new: %d\n",
drivers/net/ethernet/sun/sungem.c
929
printk(KERN_DEBUG "%s: gem_interrupt() gem_status: 0x%x\n",
drivers/net/ethernet/sun/sunqe.c
103
printk(KERN_ERR "QuadEther: AIEEE cannot reset the MACE!\n");
drivers/net/ethernet/sun/sunqe.c
118
printk(KERN_ERR "QuadEther: Cannot reset QE channel!\n");
drivers/net/ethernet/sun/sunqe.c
241
printk(KERN_NOTICE "%s: Warning, link state is down.\n", qep->dev->name);
drivers/net/ethernet/sun/sunqe.c
265
printk(KERN_ERR "%s: Excessive transmit defers.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
270
printk(KERN_ERR "%s: Carrier lost, link down?\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
276
printk(KERN_ERR "%s: Excessive transmit retries (more than 16).\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
282
printk(KERN_ERR "%s: Late transmit collision.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
289
printk(KERN_ERR "%s: Transmit fifo underflow, driver bug.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
295
printk(KERN_ERR "%s: Jabber error.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
299
printk(KERN_ERR "%s: Babble error.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
308
printk(KERN_ERR "%s: Transmit descriptor is bogus, driver bug.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
315
printk(KERN_ERR "%s: Transmit late error.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
321
printk(KERN_ERR "%s: Transmit DMA parity error.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
328
printk(KERN_ERR "%s: Transmit DMA sbus error ack.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
350
printk(KERN_ERR "%s: Receive fifo overflow.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
356
printk(KERN_ERR "%s: Late receive collision.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
372
printk(KERN_ERR "%s: Receive packet dropped.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
379
printk(KERN_ERR "%s: Receive buffer too small, driver bug.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
385
printk(KERN_ERR "%s: Receive late error.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
391
printk(KERN_ERR "%s: Receive DMA parity error.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
398
printk(KERN_ERR "%s: Receive DMA sbus error ack.\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
565
printk(KERN_ERR "%s: transmit timed out, resetting\n", dev->name);
drivers/net/ethernet/sun/sunqe.c
78
printk(KERN_ERR "QuadEther: AIEEE cannot reset the QEC!\n");
drivers/net/ethernet/sun/sunqe.c
789
printk(KERN_ERR "qec: Not in MACE mode!\n");
drivers/net/ethernet/sun/sunqe.c
802
printk(KERN_ERR "qec: Can't register irq.\n");
drivers/net/ethernet/sun/sunqe.c
841
printk(KERN_INFO "%s", version);
drivers/net/ethernet/sun/sunqe.c
872
printk(KERN_ERR "qe: Cannot map channel registers.\n");
drivers/net/ethernet/sun/sunqe.c
879
printk(KERN_ERR "qe: Cannot map MACE registers.\n");
drivers/net/ethernet/sun/sunqe.c
908
printk(KERN_INFO "%s: qe channel[%d] %pM\n", dev->name, qe->channel,
drivers/net/ethernet/ti/davinci_emac.c
488
printk(KERN_INFO"Set coalesce to %d usecs.\n", coal_intvl);
drivers/net/ethernet/ti/tlan.c
2749
printk(KERN_DEBUG "TLAN: %s has lost link\n",
drivers/net/ethernet/ti/tlan.c
2774
printk(KERN_DEBUG "TLAN: %s has reestablished link\n",
drivers/net/ethernet/ti/tlan.h
46
printk(KERN_DEBUG "TLAN: " format, ##args); \
drivers/net/ethernet/toshiba/ps3_gelic_net.c
155
printk(KERN_ERR "%s: status=%x\n", __func__,
drivers/net/ethernet/toshiba/ps3_gelic_net.c
157
printk(KERN_ERR "%s: nextphy=%x\n", __func__,
drivers/net/ethernet/toshiba/ps3_gelic_net.c
159
printk(KERN_ERR "%s: head=%p\n", __func__,
drivers/net/ethernet/toshiba/tc35815.c
1020
printk("%s: tx_skbs mismatch(%d).\n", dev->name, i);
drivers/net/ethernet/toshiba/tc35815.c
1060
printk("TxFD(%p): %08x %08x %08x %08x\n", fd,
drivers/net/ethernet/toshiba/tc35815.c
1065
printk("BD: ");
drivers/net/ethernet/toshiba/tc35815.c
1066
printk(" %08x %08x",
drivers/net/ethernet/toshiba/tc35815.c
1069
printk("\n");
drivers/net/ethernet/toshiba/tc35815.c
1078
printk("RxFD(%p): %08x %08x %08x %08x\n", fd,
drivers/net/ethernet/toshiba/tc35815.c
1085
printk("BD: ");
drivers/net/ethernet/toshiba/tc35815.c
1087
printk(" %08x %08x",
drivers/net/ethernet/toshiba/tc35815.c
1090
printk("\n");
drivers/net/ethernet/toshiba/tc35815.c
1099
printk("FrFD(%p): %08x %08x %08x %08x\n", fd,
drivers/net/ethernet/toshiba/tc35815.c
1104
printk("BD: ");
drivers/net/ethernet/toshiba/tc35815.c
1106
printk(" %08x %08x",
drivers/net/ethernet/toshiba/tc35815.c
1109
printk("\n");
drivers/net/ethernet/toshiba/tc35815.c
1118
printk("TxFD base %p, start %u, end %u\n",
drivers/net/ethernet/toshiba/tc35815.c
1120
printk("RxFD base %p limit %p cur %p\n",
drivers/net/ethernet/toshiba/tc35815.c
1122
printk("FrFD %p\n", lp->fbl_ptr);
drivers/net/ethernet/toshiba/tc35815.c
1136
printk(KERN_DEBUG "print_eth(%p)\n", add);
drivers/net/ethernet/toshiba/tc35815.c
1137
printk(KERN_DEBUG " %pM => %pM : %02x%02x\n",
drivers/net/ethernet/toshiba/tc35815.c
1155
printk(KERN_ERR "%s: PHY init failed.\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
1200
printk(KERN_WARNING "%s: transmit timed out, status %#x\n",
drivers/net/ethernet/toshiba/tc35815.c
1292
printk("%s: tx_skbs conflict.\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
1318
printk("%s: starting TxFD.\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
1325
printk("%s: queueing TxFD.\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
1337
printk(KERN_WARNING "%s: TxFD Exhausted.\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
1354
printk(KERN_WARNING "%s: Fatal Error Interrupt (%#x):",
drivers/net/ethernet/toshiba/tc35815.c
1357
printk(" IntPCI");
drivers/net/ethernet/toshiba/tc35815.c
1359
printk(" DmParErr");
drivers/net/ethernet/toshiba/tc35815.c
1361
printk(" IntNRAbt");
drivers/net/ethernet/toshiba/tc35815.c
1362
printk("\n");
drivers/net/ethernet/toshiba/tc35815.c
1365
printk(KERN_WARNING "%s: Resetting ...\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
1491
printk("%s: invalid BDID.\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
1497
printk("%s: NULL skb.\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
1547
printk("%s: invalid BDID.\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
1563
printk("%s: Freeing invalid BD.\n",
drivers/net/ethernet/toshiba/tc35815.c
1591
printk("%s: RxFD FDNext invalid.\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
1609
printk("rfd_cur = %p, next_rfd %p\n",
drivers/net/ethernet/toshiba/tc35815.c
1723
printk(KERN_WARNING "%s: %s (%#x)\n", dev->name, msg, status);
drivers/net/ethernet/toshiba/tc35815.c
1745
printk("%s: complete TxFD.\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
1754
printk("%s: tx_skbs mismatch.\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
1775
printk("%s: TxFD FDNext invalid.\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
1791
printk("%s: TxFD FDCtl invalid.\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
1804
printk("%s: start TxFD on queue.\n",
drivers/net/ethernet/toshiba/tc35815.c
1872
printk(KERN_DEBUG "%s: CAM %d: %pM\n",
drivers/net/ethernet/toshiba/tc35815.c
2029
printk(KERN_ERR "%s: MAC reset failed.\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
615
printk(KERN_ERR "%s: no PHY found\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
624
printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
drivers/net/ethernet/toshiba/tc35815.c
772
printk(version);
drivers/net/ethernet/toshiba/tc35815.c
833
printk(KERN_INFO "%s: %s at 0x%lx, %pM, IRQ %d\n",
drivers/net/ethernet/toshiba/tc35815.c
903
printk(KERN_DEBUG "%s: FD buf %p DataBuf",
drivers/net/ethernet/toshiba/tc35815.c
905
printk("\n");
drivers/net/ethernet/toshiba/tc35815.c
968
printk(KERN_DEBUG "%s: TxFD %p RxFD %p FrFD %p\n",
drivers/net/ethernet/toshiba/tc35815.c
986
printk("%s: tx_skbs mismatch(%d).\n", dev->name, i);
drivers/net/ethernet/tundra/tsi108_eth.c
1007
printk(KERN_DEBUG "%s: SFN error\n", dev->name);
drivers/net/ethernet/tundra/tsi108_eth.c
1039
printk(KERN_ERR "%s function time out\n", __func__);
drivers/net/ethernet/tundra/tsi108_eth.c
1116
printk(KERN_ERR
drivers/net/ethernet/tundra/tsi108_eth.c
1217
printk(KERN_ERR "%s function time out\n", __func__);
drivers/net/ethernet/tundra/tsi108_eth.c
1255
printk(KERN_DEBUG "PHY_STAT reg contains %08x\n", phyval);
drivers/net/ethernet/tundra/tsi108_eth.c
1281
printk(KERN_ERR "tsi108_eth%d: Could not allocate IRQ%d.\n",
drivers/net/ethernet/tundra/tsi108_eth.c
1286
printk(KERN_NOTICE
drivers/net/ethernet/tundra/tsi108_eth.c
1327
printk(KERN_WARNING
drivers/net/ethernet/tundra/tsi108_eth.c
151
printk("Dumping %s...\n", dev->name);
drivers/net/ethernet/tundra/tsi108_eth.c
152
printk("intstat %x intmask %x phy_ok %d"
drivers/net/ethernet/tundra/tsi108_eth.c
1548
printk(KERN_ERR "tsi-eth %d: Missing additional data!\n",
drivers/net/ethernet/tundra/tsi108_eth.c
1559
printk("tsi108_eth%d: probe...\n", pdev->id);
drivers/net/ethernet/tundra/tsi108_eth.c
158
printk("TX: head %d, tail %d, free %d, stat %x, estat %x, err %x\n",
drivers/net/ethernet/tundra/tsi108_eth.c
1612
printk(KERN_ERR "%s: Invalid MAC address. Please correct.\n",
drivers/net/ethernet/tundra/tsi108_eth.c
1620
printk(KERN_ERR "%s: Cannot register net device, aborting.\n",
drivers/net/ethernet/tundra/tsi108_eth.c
1626
printk(KERN_INFO "%s: Tsi108 Gigabit Ethernet, MAC: %pM\n",
drivers/net/ethernet/tundra/tsi108_eth.c
164
printk("RX: head %d, tail %d, free %d, stat %x,"
drivers/net/ethernet/tundra/tsi108_eth.c
243
printk(KERN_ERR "%s function time out\n", __func__);
drivers/net/ethernet/tundra/tsi108_eth.c
339
printk(KERN_NOTICE "%s : link is down\n", dev->name);
drivers/net/ethernet/tundra/tsi108_eth.c
614
printk("%s: bad tx packet, misc %x\n",
drivers/net/ethernet/tundra/tsi108_eth.c
639
printk(KERN_ERR "%s: Transmit while PHY is down!\n", dev->name);
drivers/net/ethernet/tundra/tsi108_eth.c
642
printk(KERN_ERR "%s: Transmit while link is down!\n",
drivers/net/ethernet/tundra/tsi108_eth.c
652
printk(KERN_ERR "%s: Transmit with full tx ring!\n",
drivers/net/ethernet/tundra/tsi108_eth.c
704
printk("%s: Tx Frame contents (%d)\n", dev->name,
drivers/net/ethernet/tundra/tsi108_eth.c
707
printk(" %2.2x", skb->data[i]);
drivers/net/ethernet/tundra/tsi108_eth.c
708
printk(".\n");
drivers/net/ethernet/tundra/tsi108_eth.c
761
printk("%s: Rx Frame contents (%d)\n",
drivers/net/ethernet/tundra/tsi108_eth.c
764
printk(" %2.2x", skb->data[i]);
drivers/net/ethernet/tundra/tsi108_eth.c
765
printk(".\n");
drivers/net/ethernet/tundra/tsi108_eth.c
852
printk(KERN_DEBUG "%s: RX error %x\n",
drivers/net/ethernet/tundra/tsi108_eth.c
975
printk(KERN_ERR "%s: TX error %x\n", dev->name, err);
drivers/net/ethernet/vertexcom/mse102x.c
308
printk(KERN_DEBUG ": %s - packet len:%d\n", msg, len);
drivers/net/ethernet/xircom/xirc2ps_cs.c
323
printk(KERN_DEBUG pr_fmt("Register common: "));
drivers/net/ethernet/xircom/xirc2ps_cs.c
328
printk(KERN_DEBUG pr_fmt("Register page %2x: "), page);
drivers/net/ethernet/xircom/xirc2ps_cs.c
338
printk(KERN_DEBUG pr_fmt("Register page %2x: "), page);
drivers/net/ethernet/xscale/ixp4xx_eth.c
1089
printk(KERN_DEBUG "%s: unable to request hardware queues\n",
drivers/net/ethernet/xscale/ixp4xx_eth.c
482
printk(KERN_ERR "%s: MII not ready to transmit\n", bus->name);
drivers/net/ethernet/xscale/ixp4xx_eth.c
502
printk(KERN_ERR "%s #%i: MII write failed\n", bus->name,
drivers/net/ethernet/xscale/ixp4xx_eth.c
508
printk(KERN_DEBUG "%s #%i: mdio_%s() took %i cycles\n", bus->name,
drivers/net/ethernet/xscale/ixp4xx_eth.c
517
printk(KERN_DEBUG "%s #%i: MII read failed\n", bus->name,
drivers/net/ethernet/xscale/ixp4xx_eth.c
536
printk(KERN_DEBUG "%s #%i: MII read [%i] -> 0x%X\n", bus->name,
drivers/net/ethernet/xscale/ixp4xx_eth.c
552
printk(KERN_DEBUG "%s #%i: MII write [%i] <- 0x%X, err = %i\n",
drivers/net/ethernet/xscale/ixp4xx_eth.c
593
printk(KERN_INFO "%s: link down\n", dev->name);
drivers/net/ethernet/xscale/ixp4xx_eth.c
626
printk("%s%02X",
drivers/net/ethernet/xscale/ixp4xx_eth.c
630
printk("\n");
drivers/net/ethernet/xscale/ixp4xx_eth.c
638
printk(KERN_DEBUG "%X: %X %3X %3X %08X %2X < %2X %4X %X"
drivers/net/ethernet/xscale/ixp4xx_eth.c
699
printk(KERN_DEBUG "%s: eth_rx_irq\n", dev->name);
drivers/net/ethernet/xscale/ixp4xx_eth.c
816
printk(KERN_DEBUG DRV_NAME ": eth_txdone_irq\n");
drivers/net/ethernet/xscale/ixp4xx_eth.c
840
printk(KERN_DEBUG "%s: eth_txdone_irq free %p\n",
drivers/net/ethernet/xscale/ixp4xx_eth.c
851
printk(KERN_DEBUG "%s: eth_txdone_irq xmit ready\n",
drivers/net/fddi/defxx.c
1097
printk("%s: Could not read adapter factory MAC address!\n",
drivers/net/fddi/defxx.c
1106
printk("%s: Could not read adapter factory MAC address!\n",
drivers/net/fddi/defxx.c
1265
printk("%s: Could not uninitialize/reset adapter!\n", bp->dev->name);
drivers/net/fddi/defxx.c
1299
printk("%s: Could not set adapter burst size!\n", bp->dev->name);
drivers/net/fddi/defxx.c
1316
printk("%s: Could not set consumer block address!\n", bp->dev->name);
drivers/net/fddi/defxx.c
1334
printk("%s: Could not set descriptor block address!\n",
drivers/net/fddi/defxx.c
1348
printk("%s: DMA command request failed!\n", bp->dev->name);
drivers/net/fddi/defxx.c
1364
printk("%s: DMA command request failed!\n", bp->dev->name);
drivers/net/fddi/defxx.c
1372
printk("%s: Adapter CAM update failed!\n", bp->dev->name);
drivers/net/fddi/defxx.c
1380
printk("%s: Adapter filters update failed!\n", bp->dev->name);
drivers/net/fddi/defxx.c
1396
printk("%s: Receive buffer allocation failed\n", bp->dev->name);
drivers/net/fddi/defxx.c
1407
printk("%s: Start command failed\n", bp->dev->name);
drivers/net/fddi/defxx.c
1462
printk(KERN_ERR "%s: Requested IRQ %d is busy\n", dev->name, dev->irq);
drivers/net/fddi/defxx.c
1498
printk(KERN_ERR "%s: Adapter open failed!\n", dev->name);
drivers/net/fddi/defxx.c
1643
printk("%s: Halt ID: Selftest Timeout\n", bp->dev->name);
drivers/net/fddi/defxx.c
1647
printk("%s: Halt ID: Host Bus Parity Error\n", bp->dev->name);
drivers/net/fddi/defxx.c
1651
printk("%s: Halt ID: Host-Directed Halt\n", bp->dev->name);
drivers/net/fddi/defxx.c
1655
printk("%s: Halt ID: Adapter Software Fault\n", bp->dev->name);
drivers/net/fddi/defxx.c
1659
printk("%s: Halt ID: Adapter Hardware Fault\n", bp->dev->name);
drivers/net/fddi/defxx.c
1663
printk("%s: Halt ID: FDDI Network PC Trace Path Test\n", bp->dev->name);
drivers/net/fddi/defxx.c
1667
printk("%s: Halt ID: Adapter DMA Error\n", bp->dev->name);
drivers/net/fddi/defxx.c
1671
printk("%s: Halt ID: Firmware Image CRC Error\n", bp->dev->name);
drivers/net/fddi/defxx.c
1675
printk("%s: Halt ID: 68000 Bus Exception\n", bp->dev->name);
drivers/net/fddi/defxx.c
1679
printk("%s: Halt ID: Unknown (code = %X)\n", bp->dev->name, halt_id);
drivers/net/fddi/defxx.c
1756
printk("%s: Non-Existent Memory Access Error\n", bp->dev->name);
drivers/net/fddi/defxx.c
1761
printk("%s: Packet Memory Parity Error\n", bp->dev->name);
drivers/net/fddi/defxx.c
1766
printk("%s: Host Bus Parity Error\n", bp->dev->name);
drivers/net/fddi/defxx.c
1772
printk("%s: Resetting adapter...\n", bp->dev->name);
drivers/net/fddi/defxx.c
1775
printk("%s: Adapter reset failed! Disabling adapter interrupts.\n", bp->dev->name);
drivers/net/fddi/defxx.c
1779
printk("%s: Adapter reset successful!\n", bp->dev->name);
drivers/net/fddi/defxx.c
1813
printk("%s: Controller has transitioned to HALTED state!\n", bp->dev->name);
drivers/net/fddi/defxx.c
1820
printk("%s: Resetting adapter...\n", bp->dev->name);
drivers/net/fddi/defxx.c
1823
printk("%s: Adapter reset failed! Disabling adapter interrupts.\n", bp->dev->name);
drivers/net/fddi/defxx.c
1827
printk("%s: Adapter reset successful!\n", bp->dev->name);
drivers/net/fddi/defxx.c
3316
printk("%s: Invalid packet length - %u bytes\n",
drivers/net/fddi/defxx.c
546
printk(version); /* we only display this string ONCE */
drivers/net/fddi/defxx.c
551
printk(KERN_ERR "%s: Unable to allocate fddidev, aborting\n",
drivers/net/fddi/defxx.c
623
printk(KERN_ERR "%s: Cannot map MMIO\n", print_name);
drivers/net/fddi/defxx.c
647
printk("%s: registered as %s\n", print_name, dev->name);
drivers/net/fddi/defxx.h
1699
#define DBG_printk(args...) printk(args)
drivers/net/fddi/skfp/ess.c
248
printk(KERN_ERR "ESS: sm_to_para failed");
drivers/net/fddi/skfp/ess.c
254
printk(KERN_ERR "ESS: sm_to_para failed");
drivers/net/fddi/skfp/h/osdef1st.h
48
#define SMT_PANIC(smc, nr, msg) printk(KERN_INFO "SMT PANIC: code: %d, msg: %s\n",nr,msg)
drivers/net/fddi/skfp/h/osdef1st.h
52
#define printf(s,args...) printk(KERN_INFO s, ## args)
drivers/net/fddi/skfp/skfddi.c
1317
printk("Unexpected SMT memory size requested: %d\n", size);
drivers/net/fddi/skfp/skfddi.c
1367
printk("fddi: Unable to align descriptor memory.\n");
drivers/net/fddi/skfp/skfddi.c
1531
printk(KERN_INFO "---Packet start---\n");
drivers/net/fddi/skfp/skfddi.c
1533
printk(KERN_INFO "------------------\n");
drivers/net/fddi/skfp/skfddi.c
1575
printk("fddi: Multi-fragment receive!\n");
drivers/net/fddi/skfp/skfddi.c
1618
printk("fddi: Invalid RIF.\n");
drivers/net/fddi/skfp/skfddi.c
1694
printk("fddi: Multi-fragment requeue!\n");
drivers/net/fddi/skfp/skfddi.c
1831
printk("fddi: Multi-fragment clear!\n");
drivers/net/fddi/skfp/skfddi.c
214
printk("%s\n", boot_msg);
drivers/net/fddi/skfp/skfddi.c
228
printk(KERN_ERR "skfp: region is not an MMIO resource\n");
drivers/net/fddi/skfp/skfddi.c
236
printk(KERN_ERR "skfp: region is not PIO resource\n");
drivers/net/fddi/skfp/skfddi.c
244
printk(KERN_ERR "skfp: Unable to map register, "
drivers/net/fddi/skfp/skfddi.c
252
printk(KERN_ERR "skfp: Unable to allocate fddi device, "
drivers/net/fddi/skfp/skfddi.c
291
printk("%s: SysKonnect FDDI PCI adapter"
drivers/net/fddi/skfp/skfddi.c
295
printk("%s: FDDI PCI adapter found\n", dev->name);
drivers/net/fddi/skfp/skfddi.c
401
printk("could not allocate mem for ");
drivers/net/fddi/skfp/skfddi.c
402
printk("LocalRxBuffer: %d byte\n", MAX_FRAME_SIZE);
drivers/net/fddi/skfp/skfddi.c
417
printk("could not allocate mem for ");
drivers/net/fddi/skfp/skfddi.c
418
printk("hardware module: %ld byte\n",
drivers/net/fddi/skfp/skfddi.c
988
printk("ioctl for %s: unknown cmd: %04x\n", dev->name, ioc.cmd);
drivers/net/plip/plip.c
1196
printk(KERN_DEBUG "%s: why am I being woken up?\n", dev->name);
drivers/net/plip/plip.c
1199
printk(KERN_DEBUG "%s: I'm broken.\n", dev->name);
drivers/net/plip/plip.c
1277
printk(KERN_ERR "plip: too many devices\n");
drivers/net/plip/plip.c
1291
printk(KERN_INFO "plip: %s has no IRQ. Using IRQ-less mode,"
drivers/net/plip/plip.c
1308
printk(KERN_ERR "%s: parport_register failed\n", name);
drivers/net/plip/plip.c
1315
printk(KERN_ERR "%s: network register failed\n", name);
drivers/net/plip/plip.c
1319
printk(KERN_INFO "%s", version);
drivers/net/plip/plip.c
1321
printk(KERN_INFO "%s: Parallel port at %#3lx, "
drivers/net/plip/plip.c
1325
printk(KERN_INFO "%s: Parallel port at %#3lx, "
drivers/net/plip/plip.c
1399
printk(KERN_INFO "plip: too many ports, %s ignored.\n",
drivers/net/plip/plip.c
1408
printk(KERN_WARNING "warning: 'plip=0x%x' ignored\n",
drivers/net/plip/plip.c
1425
printk(KERN_WARNING "plip: warning, ignoring `timid' since specific ports given.\n");
drivers/net/plip/plip.c
1430
printk (KERN_WARNING "plip: couldn't register driver\n");
drivers/net/plip/plip.c
427
printk(KERN_WARNING "%s: transmit timeout(%d,%02x)\n",
drivers/net/plip/plip.c
446
printk(KERN_WARNING "%s: receive timeout(%d,%02x)\n",
drivers/net/plip/plip.c
601
printk(KERN_DEBUG "%s: receive start\n", dev->name);
drivers/net/plip/plip.c
633
printk(KERN_WARNING "%s: bogus packet size %d.\n", dev->name, rcv->length.h);
drivers/net/plip/plip.c
639
printk(KERN_ERR "%s: Memory squeeze.\n", dev->name);
drivers/net/plip/plip.c
670
printk(KERN_DEBUG "%s: checksum error\n", dev->name);
drivers/net/plip/plip.c
684
printk(KERN_DEBUG "%s: receive end\n", dev->name);
drivers/net/plip/plip.c
765
printk(KERN_DEBUG "%s: send skb lost\n", dev->name);
drivers/net/plip/plip.c
806
printk(KERN_DEBUG "%s: send start\n", dev->name);
drivers/net/plip/plip.c
864
printk(KERN_DEBUG "%s: send end\n", dev->name);
drivers/net/plip/plip.c
902
printk(KERN_DEBUG "%s: reset interface.\n", dev->name);
drivers/net/plip/plip.c
935
printk(KERN_DEBUG "%s: spurious interrupt\n", dev->name);
drivers/net/plip/plip.c
941
printk(KERN_DEBUG "%s: interrupt.\n", dev->name);
drivers/net/plip/plip.c
962
printk(KERN_ERR "%s: receive interrupt in error state\n", dev->name);
drivers/net/plip/plip.c
988
printk(KERN_WARNING "%s: packet too big, %d.\n", dev->name, (int)skb->len);
drivers/net/plip/plip.c
994
printk(KERN_DEBUG "%s: send request\n", dev->name);
drivers/net/ppp/bsd_comp.c
1005
printk("bsd_decomp%d: fell off end of chain ", db->unit);
drivers/net/ppp/bsd_comp.c
1006
printk("0x%x at 0x%x by 0x%x, max_ent=0x%x\n",
drivers/net/ppp/bsd_comp.c
1013
printk("bsd_decomp%d: bad code chain 0x%x "
drivers/net/ppp/bsd_comp.c
1017
printk("oldcode=0x%x cptr=0x%x codem1=0x%x\n",
drivers/net/ppp/bsd_comp.c
1032
printk("bsd_decomp%d: short by %d after code 0x%x, max_ent=0x%x\n",
drivers/net/ppp/bsd_comp.c
1120
printk("bsd_decomp%d: peer should have cleared dictionary on %d\n",
drivers/net/ppp/bsd_comp.c
1157
printk(KERN_INFO "PPP BSD Compression module registered\n");
drivers/net/ppp/bsd_comp.c
530
printk ("<9>ppp: lens_ptr(%d) > max\n", idx);
drivers/net/ppp/bsd_comp.c
540
printk ("<9>ppp: dict_ptr(%d) > max\n", idx);
drivers/net/ppp/bsd_comp.c
878
printk("bsd_decomp%d: bad sequence # %d, expected %d\n",
drivers/net/ppp/bsd_comp.c
940
printk("bsd_decomp%d: bad CLEAR\n", db->unit);
drivers/net/ppp/bsd_comp.c
954
printk("bsd_decomp%d: bad code 0x%x oldcode=0x%x ",
drivers/net/ppp/bsd_comp.c
956
printk("max_ent=0x%x explen=%d seqno=%d\n",
drivers/net/ppp/bsd_comp.c
980
printk("bsd_decomp%d: ran out of mru\n", db->unit);
drivers/net/ppp/bsd_comp.c
982
printk(" len=%d, finchar=0x%x, codelen=%d, explen=%d\n",
drivers/net/ppp/ppp_async.c
385
printk(KERN_ERR "PPP_async: error %d registering line disc.\n",
drivers/net/ppp/ppp_async.c
922
printk(KERN_ERR "PPPasync: no memory (input pkt)\n");
drivers/net/ppp/ppp_deflate.c
228
printk(KERN_ERR
drivers/net/ppp/ppp_deflate.c
419
printk(KERN_DEBUG "z_decompress%d: short pkt (%d)\n",
drivers/net/ppp/ppp_deflate.c
428
printk(KERN_DEBUG "z_decompress%d: bad seq # %d, expected %d\n",
drivers/net/ppp/ppp_deflate.c
461
printk(KERN_DEBUG "z_decompress%d: inflate returned %d (%s)\n",
drivers/net/ppp/ppp_deflate.c
487
printk(KERN_DEBUG "z_decompress%d: ran out of mru\n",
drivers/net/ppp/ppp_deflate.c
495
printk(KERN_DEBUG "z_decompress%d: didn't get proto\n",
drivers/net/ppp/ppp_deflate.c
544
printk(KERN_DEBUG "z_incomp%d: inflateIncomp returned %d (%s)\n",
drivers/net/ppp/ppp_mppe.c
209
printk(KERN_WARNING "%s[%d]: unknown key length\n", debugstr,
drivers/net/ppp/ppp_mppe.c
220
printk(KERN_DEBUG "%s[%d]: initialized with %d-bit %s mode\n",
drivers/net/ppp/ppp_mppe.c
223
printk(KERN_DEBUG
drivers/net/ppp/ppp_mppe.c
296
printk(KERN_DEBUG "mppe_compress[%d]: osize too small! "
drivers/net/ppp/ppp_mppe.c
314
printk(KERN_DEBUG "mppe_compress[%d]: ccount %d\n", state->unit,
drivers/net/ppp/ppp_mppe.c
323
printk(KERN_DEBUG "mppe_compress[%d]: rekeying\n",
drivers/net/ppp/ppp_mppe.c
386
printk(KERN_DEBUG
drivers/net/ppp/ppp_mppe.c
399
printk(KERN_DEBUG "mppe_decompress[%d]: osize too small! "
drivers/net/ppp/ppp_mppe.c
408
printk(KERN_DEBUG "mppe_decompress[%d]: ccount %d\n",
drivers/net/ppp/ppp_mppe.c
413
printk(KERN_DEBUG
drivers/net/ppp/ppp_mppe.c
420
printk(KERN_DEBUG "mppe_decompress[%d]: FLUSHED bit not set in "
drivers/net/ppp/ppp_mppe.c
426
printk(KERN_DEBUG "mppe_decompress[%d]: FLUSHED bit not set on "
drivers/net/ppp/ppp_mppe.c
559
printk(KERN_DEBUG
drivers/net/ppp/ppp_mppe.c
605
printk(KERN_INFO "PPP MPPE Compression module registered\n");
drivers/net/ppp/ppp_synctty.c
111
printk(KERN_DEBUG "ppp_synctty: %s, count = %d\n", name, count);
drivers/net/ppp/ppp_synctty.c
377
printk(KERN_ERR "PPP_sync: error %d registering line disc.\n",
drivers/net/ppp/ppp_synctty.c
680
printk(KERN_ERR "PPPsync: no memory (input pkt)\n");
drivers/net/rionet.c
163
printk(KERN_INFO "%s: queued skb len %8.8x\n", DRV_NAME,
drivers/net/rionet.c
187
printk(KERN_ERR "%s: BUG! Tx Ring full when queue awake!\n",
drivers/net/rionet.c
236
printk(KERN_INFO "%s: doorbell sid %4.4x tid %4.4x info %4.4x",
drivers/net/rionet.c
261
printk(KERN_WARNING "%s: unhandled doorbell\n",
drivers/net/rionet.c
273
printk(KERN_INFO "%s: inbound message event, mbox %d slot %d\n",
drivers/net/rionet.c
290
printk(KERN_INFO
drivers/net/rionet.c
318
printk(KERN_INFO "%s: open\n", DRV_NAME);
drivers/net/rionet.c
375
printk(KERN_INFO "%s: close %s\n", DRV_NAME, ndev->name);
drivers/net/rionet.c
534
printk(KERN_INFO "%s: %s %s Version %s, MAC %pM, %s\n",
drivers/net/rionet.c
569
printk(KERN_ERR
drivers/net/rionet.c
584
printk(KERN_ERR "%s: failed to setup netdev (rc=%d)\n",
drivers/net/slip/slhc.c
733
printk(KERN_DEBUG "Called IP function on non IP-system: slhc_toss");
drivers/net/slip/slhc.c
739
printk(KERN_DEBUG "Called IP function on non IP-system: slhc_uncompress");
drivers/net/slip/slhc.c
746
printk(KERN_DEBUG "Called IP function on non IP-system: slhc_compress");
drivers/net/slip/slhc.c
753
printk(KERN_DEBUG "Called IP function on non IP-system: slhc_remember");
drivers/net/slip/slhc.c
760
printk(KERN_DEBUG "Called IP function on non IP-system: slhc_free");
drivers/net/slip/slhc.c
765
printk(KERN_DEBUG "Called IP function on non IP-system: slhc_init");
drivers/net/slip/slip.c
1291
printk(KERN_INFO "SLIP: version %s (dynamic channels, max=%d)"
drivers/net/slip/slip.c
1298
printk(KERN_INFO "CSLIP: code copyright 1989 Regents of the University of California.\n");
drivers/net/slip/slip.c
1301
printk(KERN_INFO "SLIP linefill/keepalive option.\n");
drivers/net/slip/slip.c
1311
printk(KERN_ERR "SLIP: can't register line discipline (err = %d)\n", status);
drivers/net/slip/slip.c
1360
printk(KERN_ERR "%s: tty discipline still running\n",
drivers/net/slip/slip.c
1428
printk(KERN_DEBUG "%s: no packets received during keepalive timeout, hangup.\n", sl->dev->name);
drivers/net/slip/slip.c
252
printk(KERN_WARNING "%s: unable to grow slip buffers, MTU change cancelled.\n",
drivers/net/slip/slip.c
333
printk(KERN_WARNING "%s: compressed packet ignored\n", dev->name);
drivers/net/slip/slip.c
350
printk(KERN_INFO "%s: header compression turned on\n", dev->name);
drivers/net/slip/slip.c
363
printk(KERN_WARNING "%s: memory squeeze, dropping packet.\n", dev->name);
drivers/net/slip/slip.c
382
printk(KERN_WARNING "%s: truncating oversized transmit packet!\n", sl->dev->name);
drivers/net/slip/slip.c
483
printk(KERN_WARNING "%s: transmit timed out, %s?\n",
drivers/net/slip/slip.c
506
printk(KERN_WARNING "%s: xmit call when iface is down\n", dev->name);
drivers/net/sungem_phy.c
1179
printk(KERN_DEBUG KBUILD_MODNAME ": " "PHY ID: %x, addr: %x\n",
drivers/net/usb/catc.c
936
printk(KERN_INFO "%s: %s USB Ethernet at usb-%s-%s, %pM.\n",
drivers/net/usb/dm9601.c
370
printk(KERN_ERR "Error reading MAC address\n");
drivers/net/usb/dm9601.c
381
printk(KERN_WARNING
drivers/net/wan/c101.c
219
printk(KERN_DEBUG "MSCI1: ST: %02x %02x %02x %02x\n",
drivers/net/wan/farsync.c
1658
printk("Setting TE1 data\n");
drivers/net/wan/farsync.c
1659
printk("Line Speed = %d\n", info->lineSpeed);
drivers/net/wan/farsync.c
1660
printk("Start slot = %d\n", info->startingSlot);
drivers/net/wan/farsync.c
1661
printk("Clock source = %d\n", info->clockSource);
drivers/net/wan/farsync.c
1662
printk("Framing = %d\n", my_framing);
drivers/net/wan/farsync.c
1663
printk("Structure = %d\n", info->structure);
drivers/net/wan/farsync.c
1664
printk("interface = %d\n", info->interface);
drivers/net/wan/farsync.c
1665
printk("Coding = %d\n", info->coding);
drivers/net/wan/farsync.c
1666
printk("Line build out = %d\n", info->lineBuildOut);
drivers/net/wan/farsync.c
1667
printk("Equaliser = %d\n", info->equalizer);
drivers/net/wan/farsync.c
1668
printk("Transparent mode = %d\n",
drivers/net/wan/farsync.c
1670
printk("Loop mode = %d\n", info->loopMode);
drivers/net/wan/farsync.c
1671
printk("Range = %d\n", info->range);
drivers/net/wan/farsync.c
1672
printk("Tx Buffer mode = %d\n", info->txBufferMode);
drivers/net/wan/farsync.c
1673
printk("Rx Buffer mode = %d\n", info->rxBufferMode);
drivers/net/wan/farsync.c
1674
printk("LOS Threshold = %d\n", info->losThreshold);
drivers/net/wan/farsync.c
1675
printk("Idle Code = %d\n", info->idleCode);
drivers/net/wan/farsync.c
514
printk(KERN_DEBUG pr_fmt(fmt), ##args); \
drivers/net/wan/farsync.c
520
printk(KERN_DEBUG pr_fmt(fmt), ##args); \
drivers/net/wan/hd64570.c
133
printk(KERN_DEBUG "%s: sca_set_carrier on\n",
drivers/net/wan/hd64570.c
139
printk(KERN_DEBUG "%s: sca_set_carrier off\n",
drivers/net/wan/hd64570.c
274
printk(KERN_DEBUG "%s RX(%i):", dev->name, skb->len);
drivers/net/wan/hd64570.c
584
printk(KERN_DEBUG "RX ring: CDA=%u EDA=%u DSR=%02X in=%u %sactive",
drivers/net/wan/hd64570.c
593
printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
drivers/net/wan/hd64570.c
604
printk(KERN_DEBUG "MSCI: MD: %02x %02x %02x, ST: %02x %02x %02x %02x,"
drivers/net/wan/hd64570.c
617
printk(KERN_DEBUG "ISR: %02x %02x %02x\n", sca_in(ISR0, card),
drivers/net/wan/hd64570.c
641
printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len);
drivers/net/wan/hd64572.c
107
printk(KERN_DEBUG "%s: sca_set_carrier on\n",
drivers/net/wan/hd64572.c
113
printk(KERN_DEBUG "%s: sca_set_carrier off\n",
drivers/net/wan/hd64572.c
213
printk(KERN_DEBUG "%s RX(%i):", dev->name, skb->len);
drivers/net/wan/hd64572.c
525
printk(KERN_DEBUG "RX ring: CDA=%u EDA=%u DSR=%02X in=%u %sactive",
drivers/net/wan/hd64572.c
534
printk(KERN_DEBUG "TX ring: CDA=%u EDA=%u DSR=%02X in=%u "
drivers/net/wan/hd64572.c
545
printk(KERN_DEBUG "MSCI: MD: %02x %02x %02x,"
drivers/net/wan/hd64572.c
559
printk(KERN_DEBUG "ILAR: %02x ISR: %08x %08x\n", sca_in(ILAR, card),
drivers/net/wan/hd64572.c
577
printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len);
drivers/net/wan/hdlc.c
114
printk(KERN_DEBUG "%s: hdlc_device_event NETDEV_CHANGE, carrier %i\n",
drivers/net/wan/hdlc.c
147
printk(KERN_DEBUG "%s: hdlc_open() carrier %i open %i\n", dev->name,
drivers/net/wan/hdlc.c
182
printk(KERN_DEBUG "%s: hdlc_close() carrier %i open %i\n", dev->name,
drivers/net/wan/hdlc_fr.c
1000
printk(KERN_DEBUG "fr_start\n");
drivers/net/wan/hdlc_fr.c
1025
printk(KERN_DEBUG "fr_stop\n");
drivers/net/wan/hdlc_fr.c
197
printk(KERN_DEBUG "add_pvc: allocated pvc %p, frad %p\n", pvc, dev);
drivers/net/wan/hdlc_fr.c
241
printk(KERN_DEBUG "freeing unused pvc: %p\n", pvc);
drivers/net/wan/hdlc_fr.c
926
printk(KERN_DEBUG "%s: DLCI %d FECN O%s\n", frad->name,
drivers/net/wan/hdlc_fr.c
934
printk(KERN_DEBUG "%s: DLCI %d BECN O%s\n", frad->name,
drivers/net/wan/hdlc_ppp.c
168
printk(KERN_DEBUG "%s: ppp_hard_header() called\n", dev->name);
drivers/net/wan/hdlc_ppp.c
243
printk(KERN_DEBUG "%s: TX %s [%s id 0x%X]%s\n", dev->name,
drivers/net/wan/hdlc_ppp.c
309
printk(KERN_DEBUG "%s: %s ppp_cp_event(%s) %s ...\n", dev->name,
drivers/net/wan/hdlc_ppp.c
362
printk(KERN_DEBUG "%s: %s ppp_cp_event(%s) ... %s\n", dev->name,
drivers/net/wan/hdlc_ppp.c
483
printk(KERN_DEBUG "%s: RX %s %s\n", dev->name, proto_name(pid),
drivers/net/wan/ixp4xx_hss.c
1193
printk(KERN_DEBUG "Draining TX queues took %i cycles\n", i);
drivers/net/wan/ixp4xx_hss.c
569
printk(KERN_DEBUG "%s: %s(%i)", dev->name, func, len);
drivers/net/wan/ixp4xx_hss.c
573
printk("%s%02X", !(i % 4) ? " " : "", data[i]);
drivers/net/wan/ixp4xx_hss.c
575
printk("\n");
drivers/net/wan/ixp4xx_hss.c
582
printk(KERN_DEBUG "%X: %X %3X %3X %08X %X %X\n",
drivers/net/wan/ixp4xx_hss.c
654
printk(KERN_DEBUG "%s: hss_hdlc_rx_irq\n", dev->name);
drivers/net/wan/ixp4xx_hss.c
669
printk(KERN_DEBUG "%s: hss_hdlc_poll\n", dev->name);
drivers/net/wan/ixp4xx_hss.c
684
printk(KERN_DEBUG "%s: hss_hdlc_poll"
drivers/net/wan/ixp4xx_hss.c
692
printk(KERN_DEBUG "%s: hss_hdlc_poll"
drivers/net/wan/ixp4xx_hss.c
700
printk(KERN_DEBUG "%s: hss_hdlc_poll all done\n",
drivers/net/wan/ixp4xx_hss.c
709
printk(KERN_DEBUG "%s: hss_hdlc_poll status 0x%02X"
drivers/net/wan/ixp4xx_hss.c
792
printk(KERN_DEBUG "hss_hdlc_poll: end, not all work done\n");
drivers/net/wan/ixp4xx_hss.c
804
printk(KERN_DEBUG DRV_NAME ": hss_hdlc_txdone_irq\n");
drivers/net/wan/ixp4xx_hss.c
818
printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq free %p\n",
drivers/net/wan/ixp4xx_hss.c
829
printk(KERN_DEBUG "%s: hss_hdlc_txdone_irq xmit"
drivers/net/wan/ixp4xx_hss.c
847
printk(KERN_DEBUG "%s: hss_hdlc_xmit\n", dev->name);
drivers/net/wan/ixp4xx_hss.c
904
printk(KERN_DEBUG "%s: hss_hdlc_xmit queue full\n", dev->name);
drivers/net/wan/ixp4xx_hss.c
910
printk(KERN_DEBUG "%s: hss_hdlc_xmit ready again\n",
drivers/net/wan/ixp4xx_hss.c
918
printk(KERN_DEBUG "%s: hss_hdlc_xmit end\n", dev->name);
drivers/net/wan/ixp4xx_hss.c
961
printk(KERN_DEBUG "%s: unable to request hardware queues\n",
drivers/net/wan/lapbether.c
144
printk(KERN_DEBUG "lapbether: lapb_data_received err - %d\n", err);
drivers/net/wan/lapbether.c
504
printk(banner);
drivers/net/wan/wanxl.c
231
printk(KERN_DEBUG "%s RX(%i):", dev->name,
drivers/net/wan/wanxl.c
292
printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name);
drivers/net/wan/wanxl.c
300
printk(KERN_DEBUG "%s TX(%i):", dev->name, skb->len);
drivers/net/wan/wanxl.c
317
printk(KERN_DEBUG "%s: transmitter buffer full\n", dev->name);
drivers/net/wan/wanxl.c
621
printk(KERN_DEBUG "wanXL %s: pci_alloc_consistent() returned memory"
drivers/net/wireguard/selftest/allowedips.c
49
printk(fmt_declaration, ip1, cidr1, style, color);
drivers/net/wireguard/selftest/allowedips.c
52
printk(fmt_connection, ip1, cidr1, ip2, cidr2);
drivers/net/wireguard/selftest/allowedips.c
56
printk(fmt_connection, ip1, cidr1, ip2, cidr2);
drivers/net/wireguard/selftest/allowedips.c
66
printk(KERN_DEBUG "digraph trie {\n");
drivers/net/wireguard/selftest/allowedips.c
68
printk(KERN_DEBUG "}\n");
drivers/net/wireless/admtek/adm8211.c
148
printk(KERN_WARNING "%s (adm8211): Unknown RFtype %d\n",
drivers/net/wireless/admtek/adm8211.c
166
printk(KERN_WARNING "%s (adm8211): Unknown BBPtype: %d\n",
drivers/net/wireless/admtek/adm8211.c
171
printk(KERN_WARNING "%s (adm8211): Invalid country code (%d)\n",
drivers/net/wireless/admtek/adm8211.c
178
printk(KERN_DEBUG "%s (adm8211): Channel range: %d - %d\n",
drivers/net/wireless/admtek/adm8211.c
1793
printk(KERN_ERR "%s (adm8211): Cannot enable new PCI device\n",
drivers/net/wireless/admtek/adm8211.c
1801
printk(KERN_ERR "%s (adm8211): Too short PCI resources\n",
drivers/net/wireless/admtek/adm8211.c
1811
printk(KERN_ERR "%s (adm8211): Invalid signature (0x%x)\n",
drivers/net/wireless/admtek/adm8211.c
1819
printk(KERN_ERR "%s (adm8211): Cannot obtain PCI resources\n",
drivers/net/wireless/admtek/adm8211.c
1826
printk(KERN_ERR "%s (adm8211): No suitable DMA available\n",
drivers/net/wireless/admtek/adm8211.c
1835
printk(KERN_ERR "%s (adm8211): ieee80211 alloc failed\n",
drivers/net/wireless/admtek/adm8211.c
1854
printk(KERN_ERR "%s (adm8211): Cannot map device memory\n",
drivers/net/wireless/admtek/adm8211.c
1865
printk(KERN_ERR "%s (adm8211): Cannot allocate TX/RX ring\n",
drivers/net/wireless/admtek/adm8211.c
1875
printk(KERN_WARNING "%s (adm8211): Invalid hwaddr in EEPROM!\n",
drivers/net/wireless/admtek/adm8211.c
1908
printk(KERN_ERR "%s (adm8211): Can't alloc eeprom buffer\n",
drivers/net/wireless/admtek/adm8211.c
1921
printk(KERN_ERR "%s (adm8211): Cannot register device\n",
drivers/net/wireless/admtek/adm8211.c
206
printk(KERN_WARNING "%s (adm8211): Unknown specific BBP: %d\n",
drivers/net/wireless/admtek/adm8211.c
227
printk(KERN_WARNING "%s (adm8211): Unknown transceiver: %d\n",
drivers/net/wireless/admtek/adm8211.c
233
printk(KERN_DEBUG "%s (adm8211): RFtype=%d BBPtype=%d Specific BBP=%d "
drivers/net/wireless/ath/ath10k/ahb.c
854
printk(KERN_ERR "failed to register ath10k ahb driver: %d\n",
drivers/net/wireless/ath/ath10k/pci.c
3798
printk(KERN_ERR "failed to register ath10k pci driver: %d\n",
drivers/net/wireless/ath/ath10k/pci.c
3803
printk(KERN_ERR "ahb init failed: %d\n", ret2);
drivers/net/wireless/ath/ath12k/debug.c
73
printk(KERN_DEBUG "ath12k: %pV", &vaf);
drivers/net/wireless/ath/ath5k/base.c
3241
printk("%s" pr_fmt("%s: %pV"),
drivers/net/wireless/ath/ath5k/base.c
3244
printk("%s" pr_fmt("%pV"), level, &vaf);
drivers/net/wireless/ath/ath5k/debug.c
1021
printk(KERN_DEBUG "Band not supported: %d\n",
drivers/net/wireless/ath/ath5k/debug.c
1025
printk(KERN_DEBUG "Band %s: channels %d, rates %d\n", bname,
drivers/net/wireless/ath/ath5k/debug.c
1027
printk(KERN_DEBUG " channels:\n");
drivers/net/wireless/ath/ath5k/debug.c
1029
printk(KERN_DEBUG " %3d %d %.4x %.4x\n",
drivers/net/wireless/ath/ath5k/debug.c
1035
printk(KERN_DEBUG " rates:\n");
drivers/net/wireless/ath/ath5k/debug.c
1037
printk(KERN_DEBUG " %4d %.4x %.4x %.4x\n",
drivers/net/wireless/ath/ath5k/debug.c
1052
printk(KERN_DEBUG "R (%p %llx) %08x %08x %08x %08x %08x %08x %c\n",
drivers/net/wireless/ath/ath5k/debug.c
1071
printk(KERN_DEBUG "rxdp %x, rxlink %p\n",
drivers/net/wireless/ath/ath5k/debug.c
1097
printk(KERN_DEBUG "T (%p %llx) %08x %08x %08x %08x %08x %08x %08x "
drivers/net/wireless/ath/ath6kl/debug.c
51
printk("%sath6kl: %pV", level, &vaf);
drivers/net/wireless/ath/main.c
84
printk("%sath: %s: %pV",
drivers/net/wireless/ath/main.c
88
printk("%sath: %pV", level, &vaf);
drivers/net/wireless/ath/regd.c
502
printk(KERN_DEBUG "ath: regdomain 0x%0x "
drivers/net/wireless/ath/regd.c
559
printk(KERN_DEBUG
drivers/net/wireless/ath/regd.c
568
printk(KERN_DEBUG "ath: EEPROM indicates we "
drivers/net/wireless/ath/regd.c
574
printk(KERN_DEBUG
drivers/net/wireless/ath/regd.c
679
printk(KERN_DEBUG "ath: EEPROM regdomain sanitized\n");
drivers/net/wireless/ath/regd.c
693
printk(KERN_DEBUG "ath: EEPROM regdomain: 0x%0x\n", reg->current_rd);
drivers/net/wireless/ath/regd.c
705
printk(KERN_DEBUG "ath: EEPROM indicates default "
drivers/net/wireless/ath/regd.c
713
printk(KERN_DEBUG "ath: doing EEPROM country->regdmn "
drivers/net/wireless/ath/regd.c
717
printk(KERN_DEBUG
drivers/net/wireless/ath/regd.c
724
printk(KERN_DEBUG "ath: country maps to "
drivers/net/wireless/ath/regd.c
733
printk(KERN_DEBUG "ath: "
drivers/net/wireless/ath/regd.c
749
printk(KERN_DEBUG "ath: Country alpha2 being used: %c%c\n",
drivers/net/wireless/ath/regd.c
751
printk(KERN_DEBUG "ath: Regpair used: 0x%0x\n",
drivers/net/wireless/ath/wcn36xx/wcn36xx.h
60
printk(KERN_ERR pr_fmt("ERROR " fmt), ##arg)
drivers/net/wireless/ath/wcn36xx/wcn36xx.h
63
printk(KERN_WARNING pr_fmt("WARNING " fmt), ##arg)
drivers/net/wireless/ath/wcn36xx/wcn36xx.h
66
printk(KERN_INFO pr_fmt(fmt), ##arg)
drivers/net/wireless/ath/wcn36xx/wcn36xx.h
70
printk(KERN_DEBUG pr_fmt(fmt), ##arg); \
drivers/net/wireless/atmel/at76c50x-usb.c
2203
printk(KERN_ERR DRIVER_NAME ": could not register"
drivers/net/wireless/atmel/at76c50x-usb.c
2366
printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n",
drivers/net/wireless/atmel/at76c50x-usb.c
2557
printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " loading\n");
drivers/net/wireless/atmel/at76c50x-usb.c
2562
printk(KERN_ERR DRIVER_NAME
drivers/net/wireless/atmel/at76c50x-usb.c
2573
printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " unloading\n");
drivers/net/wireless/atmel/at76c50x-usb.c
90
printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \
drivers/net/wireless/atmel/at76c50x-usb.c
96
printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \
drivers/net/wireless/broadcom/b43/debugfs.c
57
printk(KERN_ERR "b43: fappend overflow\n"); \
drivers/net/wireless/broadcom/b43/main.c
1111
printk(KERN_DEBUG "Key slot %02u: %s",
drivers/net/wireless/broadcom/b43/main.c
1116
printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF));
drivers/net/wireless/broadcom/b43/main.c
1121
printk(" Algo: %04X/%02X", algo, key->algorithm);
drivers/net/wireless/broadcom/b43/main.c
1125
printk(" TKIP: ");
drivers/net/wireless/broadcom/b43/main.c
1129
printk("%02X%02X", (tmp & 0xFF), ((tmp >> 8) & 0xFF));
drivers/net/wireless/broadcom/b43/main.c
1138
printk(" MAC: %pM", mac);
drivers/net/wireless/broadcom/b43/main.c
1140
printk(" DEFAULT KEY");
drivers/net/wireless/broadcom/b43/main.c
1141
printk("\n");
drivers/net/wireless/broadcom/b43/main.c
1932
printk(KERN_INFO);
drivers/net/wireless/broadcom/b43/main.c
1933
printk("r%02u: 0x%04X ", i, tmp);
drivers/net/wireless/broadcom/b43/main.c
1936
printk("\n");
drivers/net/wireless/broadcom/b43/main.c
1940
printk("\n");
drivers/net/wireless/broadcom/b43/main.c
398
printk(KERN_INFO "b43-%s: %pV",
drivers/net/wireless/broadcom/b43/main.c
419
printk(KERN_ERR "b43-%s ERROR: %pV",
drivers/net/wireless/broadcom/b43/main.c
440
printk(KERN_WARNING "b43-%s warning: %pV",
drivers/net/wireless/broadcom/b43/main.c
459
printk(KERN_DEBUG "b43-%s debug: %pV",
drivers/net/wireless/broadcom/b43/main.c
5822
printk(KERN_INFO "Broadcom 43xx driver loaded "
drivers/net/wireless/broadcom/b43legacy/b43legacy.h
339
printk(KERN_INFO PFX "Test (%s) failed\n", \
drivers/net/wireless/broadcom/b43legacy/debugfs.c
60
printk(KERN_ERR "b43legacy: fappend overflow\n"); \
drivers/net/wireless/broadcom/b43legacy/main.c
179
printk(KERN_INFO "b43legacy-%s: %pV",
drivers/net/wireless/broadcom/b43legacy/main.c
198
printk(KERN_ERR "b43legacy-%s ERROR: %pV",
drivers/net/wireless/broadcom/b43legacy/main.c
217
printk(KERN_WARNING "b43legacy-%s warning: %pV",
drivers/net/wireless/broadcom/b43legacy/main.c
234
printk(KERN_DEBUG "b43legacy-%s debug: %pV",
drivers/net/wireless/broadcom/b43legacy/main.c
4003
printk(KERN_INFO "Broadcom 43xx-legacy driver loaded "
drivers/net/wireless/broadcom/b43legacy/radio.c
68
printk(KERN_INFO "b43legacy: Channel %d is out of range\n",
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1024
printk(KERN_ERR DRV_NAME ": %s: Error loading microcode: %d\n",
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1036
printk(KERN_ERR DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1231
printk(KERN_ERR DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1291
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1484
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1511
printk(KERN_WARNING DRV_NAME ": "
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1550
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1589
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1596
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1731
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1742
printk(KERN_ERR DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1753
printk(KERN_ERR DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1766
printk(KERN_ERR DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1775
printk(KERN_INFO "%s: Radio is disabled by RF switch.\n",
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1794
printk(KERN_ERR DRV_NAME ": %s: Failed to start the card.\n",
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1803
printk(KERN_ERR DRV_NAME ": "
drivers/net/wireless/intel/ipw2x00/ipw2100.c
1851
printk(KERN_ERR DRV_NAME ": %s: Error stopping adapter.\n",
drivers/net/wireless/intel/ipw2x00/ipw2100.c
201
printk(KERN_DEBUG "ipw2100: %s ", __func__); \
drivers/net/wireless/intel/ipw2x00/ipw2100.c
202
printk(message); \
drivers/net/wireless/intel/ipw2x00/ipw2100.c
2493
printk(KERN_WARNING DRV_NAME ": "
drivers/net/wireless/intel/ipw2x00/ipw2100.c
2824
printk(KERN_WARNING DRV_NAME ": %s: Bad fw_pend_list entry!\n",
drivers/net/wireless/intel/ipw2x00/ipw2100.c
2838
printk(KERN_WARNING DRV_NAME ": %s: write index mismatch\n",
drivers/net/wireless/intel/ipw2x00/ipw2100.c
2895
printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
drivers/net/wireless/intel/ipw2x00/ipw2100.c
2931
printk(KERN_WARNING DRV_NAME ": %s: Queue mismatch. "
drivers/net/wireless/intel/ipw2x00/ipw2100.c
2972
printk(KERN_WARNING DRV_NAME ": "
drivers/net/wireless/intel/ipw2x00/ipw2100.c
3214
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
3232
printk(KERN_ERR DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
3335
printk(KERN_WARNING DRV_NAME ": IRQ INTA == 0xFFFFFFFF\n");
drivers/net/wireless/intel/ipw2x00/ipw2100.c
3424
printk(KERN_ERR DRV_NAME ": "
drivers/net/wireless/intel/ipw2x00/ipw2100.c
3992
printk(KERN_ERR DRV_NAME ": %s: Could not disable adapter %d\n",
drivers/net/wireless/intel/ipw2x00/ipw2100.c
4020
printk(KERN_INFO "%s: Resetting on mode change.\n", priv->net_dev->name);
drivers/net/wireless/intel/ipw2x00/ipw2100.c
4422
printk(KERN_ERR DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
4730
printk(KERN_ERR DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
511
printk(KERN_WARNING DRV_NAME ": attempt to use fw ordinals "
drivers/net/wireless/intel/ipw2x00/ipw2100.c
520
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
5309
printk(KERN_ERR DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
5397
printk(KERN_ERR DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
5434
printk(KERN_ERR DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
573
printk(KERN_WARNING DRV_NAME ": ordinal %d neither in table 1 nor "
drivers/net/wireless/intel/ipw2x00/ipw2100.c
6140
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
6149
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
6158
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
6172
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
6179
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
6191
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
6205
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
6215
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
6223
printk(KERN_INFO DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
6242
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
6262
printk(KERN_WARNING DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.c
6519
printk(KERN_INFO DRV_NAME ": %s, %s\n", DRV_DESCRIPTION, DRV_VERSION);
drivers/net/wireless/intel/ipw2x00/ipw2100.c
652
printk(KERN_DEBUG "%s\n",
drivers/net/wireless/intel/ipw2x00/ipw2100.c
6520
printk(KERN_INFO DRV_NAME ": %s\n", DRV_COPYRIGHT);
drivers/net/wireless/intel/ipw2x00/ipw2100.c
792
printk(KERN_WARNING DRV_NAME ": %s: firmware fatal error\n",
drivers/net/wireless/intel/ipw2x00/ipw2100.c
8305
printk(KERN_WARNING DRV_NAME ": Firmware image not compatible "
drivers/net/wireless/intel/ipw2x00/ipw2100.c
8348
printk(KERN_ERR DRV_NAME ": "
drivers/net/wireless/intel/ipw2x00/ipw2100.c
8423
printk(KERN_ERR DRV_NAME ": "
drivers/net/wireless/intel/ipw2x00/ipw2100.c
8535
printk(KERN_ERR DRV_NAME ": %s: Error initializing Symbol\n",
drivers/net/wireless/intel/ipw2x00/ipw2100.c
8553
printk(KERN_ERR DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2100.h
97
#define IPW_DEBUG_ERROR(f, a...) printk(KERN_ERR DRV_NAME ": " f, ## a)
drivers/net/wireless/intel/ipw2x00/ipw2100.h
98
#define IPW_DEBUG_WARNING(f, a...) printk(KERN_WARNING DRV_NAME ": " f, ## a)
drivers/net/wireless/intel/ipw2x00/ipw2200.c
10153
printk(KERN_ERR "Unknown security level %d\n",
drivers/net/wireless/intel/ipw2x00/ipw2200.c
10198
printk(KERN_INFO "Trying to reallocate for %d bytes\n",
drivers/net/wireless/intel/ipw2x00/ipw2200.c
10206
printk(KERN_INFO "Adding frag %d %d...\n",
drivers/net/wireless/intel/ipw2x00/ipw2200.c
10375
printk(KERN_INFO "%s: Setting MAC to %pM\n",
drivers/net/wireless/intel/ipw2x00/ipw2200.c
11595
printk(KERN_WARNING DRV_NAME ": No suitable DMA available.\n");
drivers/net/wireless/intel/ipw2x00/ipw2200.c
11699
printk(KERN_INFO DRV_NAME ": Detected geography %s (%d 802.11bg "
drivers/net/wireless/intel/ipw2x00/ipw2200.c
11813
printk(KERN_INFO "%s: Going into suspend...\n", dev->name);
drivers/net/wireless/intel/ipw2x00/ipw2200.c
11833
printk(KERN_INFO "%s: Coming out of suspend...\n", dev->name);
drivers/net/wireless/intel/ipw2x00/ipw2200.c
1184
printk(KERN_INFO DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2200.c
1187
printk(KERN_INFO DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2200.c
11883
printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
drivers/net/wireless/intel/ipw2x00/ipw2200.c
11884
printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
drivers/net/wireless/intel/ipw2x00/ipw2200.c
265
printk(KERN_DEBUG "%s\n", line);
drivers/net/wireless/intel/ipw2x00/ipw2200.c
5144
printk(KERN_CRIT "%s: Can not allocate SKB buffers.\n",
drivers/net/wireless/intel/ipw2x00/ipw2200.c
7626
printk(KERN_ERR "Unknown security level %d\n",
drivers/net/wireless/intel/ipw2x00/ipw2200.c
8225
printk(KERN_CRIT "Queue not allocated!\n");
drivers/net/wireless/intel/ipw2x00/ipw2200.c
8496
printk(KERN_INFO DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2200.c
8507
printk(KERN_INFO DRV_NAME
drivers/net/wireless/intel/ipw2x00/ipw2200.h
1380
printk(KERN_DEBUG DRV_NAME": %s " fmt, __func__ , ## args); } while (0)
drivers/net/wireless/intel/ipw2x00/ipw2200.h
1385
printk(KERN_DEBUG DRV_NAME": %s " fmt, __func__ , ## args); } while (0)
drivers/net/wireless/intel/ipw2x00/ipw2200.h
1451
#define IPW_ERROR(f, a...) printk(KERN_ERR DRV_NAME ": " f, ## a)
drivers/net/wireless/intel/ipw2x00/ipw2200.h
1452
#define IPW_WARNING(f, a...) printk(KERN_WARNING DRV_NAME ": " f, ## a)
drivers/net/wireless/intel/ipw2x00/libipw.h
104
#define LIBIPW_ERROR(f, a...) printk(KERN_ERR "libipw: " f, ## a)
drivers/net/wireless/intel/ipw2x00/libipw.h
105
#define LIBIPW_WARNING(f, a...) printk(KERN_WARNING "libipw: " f, ## a)
drivers/net/wireless/intel/ipw2x00/libipw.h
61
printk(KERN_DEBUG "libipw: %s " fmt, __func__ , ## args); } while (0)
drivers/net/wireless/intel/ipw2x00/libipw_crypto.c
121
printk(KERN_DEBUG "%s: entries remaining in delayed crypt "
drivers/net/wireless/intel/ipw2x00/libipw_crypto.c
172
printk(KERN_DEBUG "libipw_crypt: registered algorithm '%s'\n",
drivers/net/wireless/intel/ipw2x00/libipw_crypto.c
193
printk(KERN_DEBUG "libipw_crypt: unregistered algorithm '%s'\n",
drivers/net/wireless/intel/ipw2x00/libipw_crypto_tkip.c
440
printk(KERN_DEBUG "Invalid packet for Michael MIC add "
drivers/net/wireless/intel/ipw2x00/libipw_crypto_tkip.c
487
printk(KERN_DEBUG "%s: Michael MIC verification failed for "
drivers/net/wireless/intel/ipw2x00/libipw_module.c
234
printk(KERN_INFO DRV_NAME
drivers/net/wireless/intel/ipw2x00/libipw_module.c
273
printk(KERN_INFO DRV_NAME ": " DRV_DESCRIPTION ", " DRV_VERSION "\n");
drivers/net/wireless/intel/ipw2x00/libipw_module.c
274
printk(KERN_INFO DRV_NAME ": " DRV_COPYRIGHT "\n");
drivers/net/wireless/intel/ipw2x00/libipw_rx.c
1155
printk(KERN_ERR
drivers/net/wireless/intel/ipw2x00/libipw_rx.c
168
printk(KERN_DEBUG "%s: Master mode not yet supported.\n",
drivers/net/wireless/intel/ipw2x00/libipw_rx.c
197
printk(KERN_DEBUG "%s: unknown management frame "
drivers/net/wireless/intel/ipw2x00/libipw_rx.c
207
printk(KERN_DEBUG "%s: hostap_rx_frame_mgmt: management frame "
drivers/net/wireless/intel/ipw2x00/libipw_rx.c
313
printk(KERN_DEBUG "%s: MSDU decryption/MIC verification failed"
drivers/net/wireless/intel/ipw2x00/libipw_rx.c
351
printk(KERN_INFO "%s: SKB length < 10\n", dev->name);
drivers/net/wireless/intel/ipw2x00/libipw_rx.c
363
printk(KERN_INFO "%s: invalid SKB length %d\n",
drivers/net/wireless/intel/ipw2x00/libipw_rx.c
465
printk(KERN_DEBUG "%s: failed to decrypt mgmt::auth "
drivers/net/wireless/intel/ipw2x00/libipw_rx.c
594
printk(KERN_WARNING "%s: host decrypted and "
drivers/net/wireless/intel/ipw2x00/libipw_rx.c
711
printk(KERN_DEBUG "%s: RX: IEEE 802.1X frame\n",
drivers/net/wireless/intel/ipw2x00/libipw_rx.c
723
printk(KERN_DEBUG "%s: dropped frame from "
drivers/net/wireless/intel/ipw2x00/libipw_rx.c
774
printk(KERN_DEBUG "%s: skb_clone failed for "
drivers/net/wireless/intel/ipw2x00/libipw_tx.c
157
printk(KERN_INFO "%s: Encryption failed: len=%d.\n",
drivers/net/wireless/intel/ipw2x00/libipw_tx.c
270
printk(KERN_WARNING "%s: No xmit handler.\n", ieee->dev->name);
drivers/net/wireless/intel/ipw2x00/libipw_tx.c
275
printk(KERN_WARNING "%s: skb too small (%d).\n",
drivers/net/wireless/intel/ipw2x00/libipw_tx.c
414
printk(KERN_WARNING "%s: Could not allocate TXB\n",
drivers/net/wireless/intel/ipw2x00/libipw_wx.c
384
printk(KERN_WARNING "%s: could not initialize WEP: "
drivers/net/wireless/intel/iwlwifi/tests/devinfo.c
56
printk(KERN_DEBUG "%sdev=%04x subdev=%04x/%04x%s\n",
drivers/net/wireless/intersil/p54/fwio.c
99
printk(KERN_INFO "p54: rx_mtu reduced from %d "
drivers/net/wireless/marvell/libertas/defs.h
102
printk("\n");
drivers/net/wireless/marvell/libertas/defs.h
53
printk(KERN_DEBUG DRV_NAME grpnam ": " fmt, ## args); } while (0)
drivers/net/wireless/marvell/libertas/defs.h
96
printk("\n");
drivers/net/wireless/marvell/libertas/defs.h
97
printk(DRV_NAME " %s: ", prompt);
drivers/net/wireless/marvell/libertas/defs.h
99
printk("%02x ", (u8) * buf);
drivers/net/wireless/marvell/libertas/if_sdio.c
1394
printk(KERN_INFO "libertas_sdio: Libertas SDIO driver\n");
drivers/net/wireless/marvell/libertas/if_sdio.c
1395
printk(KERN_INFO "libertas_sdio: Copyright Pierre Ossman\n");
drivers/net/wireless/marvell/libertas/if_spi.c
1271
printk(KERN_INFO "libertas_spi: Libertas SPI driver\n");
drivers/net/wireless/marvell/libertas/if_usb.c
182
printk(KERN_CRIT "Resetting OLPC wireless via EC...\n");
drivers/net/wireless/marvell/libertas_tf/cmd.c
102
printk(KERN_INFO "libertastf: %pM, fw %u.%u.%up%u, cap 0x%08x\n",
drivers/net/wireless/marvell/libertas_tf/deb_defs.h
51
printk(KERN_DEBUG DRV_NAME grpnam ": " fmt, ## args); } while (0)
drivers/net/wireless/marvell/libertas_tf/main.c
136
printk(KERN_DEBUG "libertastf: command timer expired; "
drivers/net/wireless/marvell/libertas_tf/main.c
141
printk(KERN_DEBUG "libertas: command %x timed out\n",
drivers/net/wireless/marvell/libertas_tf/main.c
713
printk(KERN_ERR "libertastf: couldn't create workqueue\n");
drivers/net/wireless/marvell/mwl8k.c
2557
printk(KERN_ERR "%s: Unsupported fw API version for %s."
drivers/net/wireless/marvell/mwl8k.c
560
printk(KERN_ERR "%s: Error requesting helper fw %s\n",
drivers/net/wireless/marvell/mwl8k.c
5799
printk(KERN_ERR "%s: Error requesting preferred fw %s.\n"
drivers/net/wireless/marvell/mwl8k.c
580
printk(KERN_ERR "%s: Error requesting firmware file %s\n",
drivers/net/wireless/marvell/mwl8k.c
5804
printk(KERN_ERR "%s: Error requesting alt fw %s\n",
drivers/net/wireless/marvell/mwl8k.c
5821
printk(KERN_ERR "%s: Error requesting helper fw %s\n",
drivers/net/wireless/marvell/mwl8k.c
5860
printk(KERN_ERR "%s: Error requesting alt fw %s\n",
drivers/net/wireless/marvell/mwl8k.c
5873
printk(KERN_ERR "%s: Unexpected firmware loading state: %d\n",
drivers/net/wireless/marvell/mwl8k.c
6139
printk(KERN_WARNING "mwl8k: Failed to reload firmware image.\n");
drivers/net/wireless/marvell/mwl8k.c
6278
printk(KERN_INFO "%s version %s\n", MWL8K_DESC, MWL8K_VERSION);
drivers/net/wireless/marvell/mwl8k.c
6285
printk(KERN_ERR "%s: Cannot enable new PCI device\n",
drivers/net/wireless/marvell/mwl8k.c
6292
printk(KERN_ERR "%s: Cannot obtain PCI resources\n",
drivers/net/wireless/marvell/mwl8k.c
6302
printk(KERN_ERR "%s: ieee80211 alloc failed\n", MWL8K_NAME);
drivers/net/wireless/marvell/mwl8k.c
6353
printk(KERN_WARNING "AP fw is unavailable. Using STA fw.");
drivers/net/wireless/marvell/mwl8k.c
6356
printk(KERN_WARNING "STA fw is unavailable. Using AP fw.");
drivers/net/wireless/marvell/mwl8k.c
761
printk(KERN_ERR "%s: helper image needed but none "
drivers/net/wireless/marvell/mwl8k.c
768
printk(KERN_ERR "%s: unable to load firmware "
drivers/net/wireless/marvell/mwl8k.c
783
printk(KERN_ERR "%s: unable to load firmware image\n",
drivers/net/wireless/ralink/rt2x00/rt2x00.h
57
printk(KERN_ERR KBUILD_MODNAME ": %s: Error - " fmt, \
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
1743
printk(KERN_ERR "%s (rtl8180): Cannot enable new PCI device\n",
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
1750
printk(KERN_ERR "%s (rtl8180): Cannot obtain PCI resources\n",
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
1760
printk(KERN_ERR "%s (rtl8180): Too short PCI resources\n",
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
1768
printk(KERN_ERR "%s (rtl8180): No suitable DMA available\n",
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
1777
printk(KERN_ERR "%s (rtl8180): ieee80211 alloc failed\n",
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
1859
printk(KERN_ERR "%s (rtl8180): Unknown chip! (0x%x)\n",
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
1912
printk(KERN_ERR "%s (rtl8180): Unknown RF! (0x%x)\n",
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
1919
printk(KERN_ERR "%s (rtl8180): %s RF frontend not supported!\n",
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
1926
printk(KERN_WARNING "%s (rtl8180): Invalid hwaddr! Using"
drivers/net/wireless/realtek/rtl818x/rtl8180/dev.c
1936
printk(KERN_ERR "%s (rtl8180): Cannot register device\n",
drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
1458
printk(KERN_ERR "rtl8187: ieee80211 alloc failed\n");
drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
1516
printk(KERN_WARNING "rtl8187: Invalid hwaddr! Using randomly "
drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
1629
printk(KERN_INFO "rtl8187: inconsistency between id with OEM"
drivers/net/wireless/realtek/rtl818x/rtl8187/dev.c
1643
printk(KERN_ERR "rtl8187: Cannot register device\n");
drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c
154
printk(KERN_INFO "LEDs: Failed to register %s\n", name);
drivers/net/wireless/realtek/rtl818x/rtl8187/leds.c
181
printk(KERN_INFO "rtl8187: Customer ID is 0x%02X\n", custid);
drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.c
36
printk(KERN_INFO "rtl8187: wireless switch is %s\n",
drivers/net/wireless/realtek/rtl818x/rtl8187/rfkill.c
51
printk(KERN_INFO "rtl8187: wireless radio switch turned %s\n",
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
2343
printk("mac->link_state = %d\n", mac->link_state);
drivers/net/wireless/realtek/rtlwifi/rtl8821ae/hw.c
2413
printk("hw_rof_enable\n");
drivers/net/wireless/st/cw1200/cw1200_spi.c
103
printk("%02x ", ((u8 *)t_addr.tx_buf)[i]);
drivers/net/wireless/st/cw1200/cw1200_spi.c
104
printk(" : ");
drivers/net/wireless/st/cw1200/cw1200_spi.c
106
printk("%02x ", ((u8 *)t_msg.rx_buf)[i]);
drivers/net/wireless/st/cw1200/cw1200_spi.c
107
printk("\n");
drivers/net/wireless/st/cw1200/cw1200_spi.c
168
printk("%02x ", ((u8 *)t_addr.tx_buf)[i]);
drivers/net/wireless/st/cw1200/cw1200_spi.c
169
printk(" : ");
drivers/net/wireless/st/cw1200/cw1200_spi.c
171
printk("%02x ", ((u8 *)t_msg.tx_buf)[i]);
drivers/net/wireless/st/cw1200/cw1200_spi.c
172
printk("\n");
drivers/net/wireless/ti/wl1251/wl1251.h
44
printk(KERN_ERR DRIVER_PREFIX "ERROR " fmt "\n", ##arg)
drivers/net/wireless/ti/wl1251/wl1251.h
47
printk(KERN_WARNING DRIVER_PREFIX "WARNING " fmt "\n", ##arg)
drivers/net/wireless/ti/wl1251/wl1251.h
50
printk(KERN_INFO DRIVER_PREFIX fmt "\n", ##arg)
drivers/net/wireless/ti/wl1251/wl1251.h
53
printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg)
drivers/net/wireless/ti/wl1251/wl1251.h
58
printk(KERN_DEBUG DRIVER_PREFIX fmt "\n", ##arg); \
drivers/net/wireless/ti/wlcore/debug.h
73
printk(KERN_DEBUG pr_fmt(DRIVER_PREFIX fmt "\n"), \
drivers/net/wireless/ti/wlcore/sdio.c
100
printk(KERN_DEBUG "wlcore_sdio: WRITE to 0x%04x\n", addr);
drivers/net/wireless/ti/wlcore/sdio.c
81
printk(KERN_DEBUG "wlcore_sdio: READ from 0x%04x\n", addr);
drivers/net/wireless/virtual/mac80211_hwsim_main.c
5696
printk(KERN_DEBUG
drivers/net/wireless/virtual/mac80211_hwsim_main.c
7144
printk(KERN_INFO "mac80211_hwsim: wmediumd released netlink"
drivers/net/wireless/virtual/mac80211_hwsim_main.c
7160
printk(KERN_INFO "mac80211_hwsim: initializing netlink\n");
drivers/of/base.c
1302
printk("%s %pOF", msg, args->np);
drivers/of/unittest.c
69
printk(level pr_fmt("EXPECT \\ : ") fmt, ##__VA_ARGS__)
drivers/of/unittest.c
72
printk(level pr_fmt("EXPECT / : ") fmt, ##__VA_ARGS__)
drivers/of/unittest.c
75
printk(level pr_fmt("EXPECT_NOT \\ : ") fmt, ##__VA_ARGS__)
drivers/of/unittest.c
78
printk(level pr_fmt("EXPECT_NOT / : ") fmt, ##__VA_ARGS__)
drivers/parisc/asp.c
78
printk(KERN_INFO "%s version %d at 0x%lx found.\n",
drivers/parisc/asp.c
85
printk(KERN_ERR "%s(): cannot get GSC irq\n", __func__);
drivers/parisc/ccio-dma.c
1376
printk(KERN_ERR "%s() failed to claim CCIO bus address space (%08lx,%08lx)\n",
drivers/parisc/ccio-dma.c
1525
printk(KERN_ERR MODULE_NAME ": memory allocation failure\n");
drivers/parisc/ccio-dma.c
1531
printk(KERN_INFO "Found %s at 0x%lx\n", ioc->name,
drivers/parisc/ccio-dma.c
67
#define DBG_INIT(x...) printk(x)
drivers/parisc/ccio-dma.c
695
printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n");
drivers/parisc/ccio-dma.c
73
#define DBG_RUN(x...) printk(x)
drivers/parisc/ccio-dma.c
79
#define DBG_RES(x...) printk(x)
drivers/parisc/ccio-dma.c
85
#define DBG_RUN_SG(x...) printk(x)
drivers/parisc/dino.c
1038
printk(KERN_ERR "ERROR: failed to scan PCI bus on %s (duplicate bus number %d?)\n",
drivers/parisc/dino.c
462
printk(KERN_INFO "PCI: Cirrus Cardbus IRQ fixup for %s, from %d to %d\n",
drivers/parisc/dino.c
532
printk(KERN_ERR "Dino: cannot attach bus %s\n",
drivers/parisc/dino.c
64
#define DBG(x...) printk(x)
drivers/parisc/dino.c
678
printk(KERN_WARNING "Device %s has undefined IRQ, "
drivers/parisc/dino.c
685
printk(KERN_WARNING "Device %s has unassigned IRQ\n", pci_name(dev));
drivers/parisc/dino.c
779
printk(KERN_WARNING "%s: No PCI devices enabled.\n", name);
drivers/parisc/dino.c
800
printk(KERN_ERR "%s is out of resource windows for range %d (0x%lx-0x%lx)\n", name, count, start, end);
drivers/parisc/dino.c
824
printk(KERN_ERR "%s: failed to claim PCI Bus address "
drivers/parisc/dino.c
859
printk(KERN_WARNING "%s: gsc_alloc_irq() failed\n", name);
drivers/parisc/dino.c
865
printk(KERN_WARNING "%s: request_irq() failed with %d\n",
drivers/parisc/dino.c
900
printk(KERN_ERR "%s: request I/O Port region failed "
drivers/parisc/dino.c
960
printk("%s version %s found at 0x%lx\n", name, version, hpa);
drivers/parisc/dino.c
963
printk(KERN_ERR "DINO: Hey! Someone took my MMIO space (0x%lx)!\n",
drivers/parisc/dino.c
971
printk(KERN_WARNING "Enabling Cujo 2.0 bug workaround\n");
drivers/parisc/dino.c
977
printk("Don't recognise Cujo at address 0x%lx, not enabling workaround\n", hpa);
drivers/parisc/dino.c
982
printk(KERN_WARNING
drivers/parisc/dino.c
995
printk("dino_init_chip - couldn't alloc dino_device\n");
drivers/parisc/eisa.c
242
printk(KERN_ALERT "eisa: uhh, irq2?\n");
drivers/parisc/eisa.c
300
printk(KERN_INFO "%s EISA Adapter found at 0x%08lx\n",
drivers/parisc/eisa.c
312
printk(KERN_ERR "EISA: failed to claim EISA Bus address space!\n");
drivers/parisc/eisa.c
321
printk(KERN_ERR "EISA: failed to claim EISA Bus port space!\n");
drivers/parisc/eisa.c
328
printk(KERN_ERR "EISA: request_irq failed!\n");
drivers/parisc/eisa.c
356
printk(KERN_ERR "EISA: ioremap failed!\n");
drivers/parisc/eisa.c
372
printk(KERN_ERR "EISA: Failed to register EISA root\n");
drivers/parisc/eisa.c
414
printk(KERN_WARNING
drivers/parisc/eisa.c
425
printk(KERN_WARNING
drivers/parisc/eisa.c
444
printk(KERN_ERR "eisa: EISA irq value are 0-15\n");
drivers/parisc/eisa.c
46
#define EISA_DBG(msg, arg...) printk(KERN_DEBUG "eisa: " msg, ## arg)
drivers/parisc/eisa_eeprom.c
89
printk(KERN_ERR "EISA EEPROM: cannot register misc device.\n");
drivers/parisc/eisa_eeprom.c
93
printk(KERN_INFO "EISA EEPROM at 0x%px\n", eisa_eeprom_addr);
drivers/parisc/eisa_enumerator.c
189
printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
drivers/parisc/eisa_enumerator.c
222
printk(KERN_WARNING "port_init: unverified mask attribute\n");
drivers/parisc/eisa_enumerator.c
235
printk(KERN_WARNING "port_init: unverified mask attribute\n");
drivers/parisc/eisa_enumerator.c
247
printk(KERN_WARNING "port_init: unverified mask attribute\n");
drivers/parisc/eisa_enumerator.c
257
printk(KERN_ERR "Invalid port init word %02x\n", c);
drivers/parisc/eisa_enumerator.c
295
printk(KERN_ERR "eisa_enumerator: type info field too long (%d, max is 80)\n", len);
drivers/parisc/eisa_enumerator.c
333
printk(KERN_INFO "EISA slot %d: %s %s ",
drivers/parisc/eisa_enumerator.c
355
printk("function %d have free-form configuration, skipping ",
drivers/parisc/eisa_enumerator.c
396
printk(KERN_ERR "eisa_enumerator: function %d length mismatch "
drivers/parisc/eisa_enumerator.c
410
printk(KERN_ERR "eisa_enumerator: config data length mismatch got %d, expected %d\n",
drivers/parisc/eisa_enumerator.c
416
printk(KERN_ERR "eisa_enumerator: number of functions mismatch got %d, expected %d\n",
drivers/parisc/eisa_enumerator.c
443
printk(KERN_ERR "EISA slot %d a configured board was not detected (",
drivers/parisc/eisa_enumerator.c
447
printk(" expected %s)\n", id_string);
drivers/parisc/eisa_enumerator.c
454
printk(KERN_ERR "EISA slot %d id mismatch: got %s",
drivers/parisc/eisa_enumerator.c
458
printk(" expected %s\n", id_string);
drivers/parisc/eisa_enumerator.c
491
printk(KERN_INFO "Enumerating EISA bus\n");
drivers/parisc/eisa_enumerator.c
510
printk (KERN_WARNING "EISA EEPROM offset 0x%x out of range\n",es->config_data_offset);
drivers/parisc/eisa_enumerator.c
99
printk(KERN_ERR "EISA Enumerator: failed to claim EISA Bus address space!\n");
drivers/parisc/gsc.c
253
printk(KERN_WARNING "%s IRQ %d EIM 0x%x", gsc_asic->name,
drivers/parisc/gsc.c
256
printk(" IMR is non-zero! (0x%x)",
drivers/parisc/gsc.c
258
printk("\n");
drivers/parisc/gsc.c
28
#define DEBPRINTK printk
drivers/parisc/gsc.c
37
printk("cannot get irq\n");
drivers/parisc/gsc.c
56
printk("cannot claim irq %d\n", c);
drivers/parisc/hppb.c
59
printk(KERN_ERR "HP-PB: Unable to allocate memory.\n");
drivers/parisc/iosapic.c
146
#define DBG(x...) printk(x)
drivers/parisc/iosapic.c
152
#define DBG_IRT(x...) printk(x)
drivers/parisc/iosapic.c
280
printk(KERN_WARNING MODULE_NAME ": read_irt : can "
drivers/parisc/iosapic.c
311
printk(KERN_WARNING MODULE_NAME ": read_irt : can "
drivers/parisc/iosapic.c
329
printk(MODULE_NAME " Interrupt Routing Table (cell %ld)\n", cell_num);
drivers/parisc/iosapic.c
330
printk(MODULE_NAME " start = 0x%px num_entries %ld entry_size %d\n",
drivers/parisc/iosapic.c
336
printk(MODULE_NAME " %02x %02x %02x %02x %02x %02x %02x %02x %08x%08x\n",
drivers/parisc/iosapic.c
430
printk(KERN_WARNING MODULE_NAME ": 0x%lx : no IRT entry for slot %d, pin %d\n",
drivers/parisc/iosapic.c
621
printk("iosapic_enable_irq(): regs %p", vi->eoi_addr);
drivers/parisc/iosapic.c
623
printk(" %x", readl(t));
drivers/parisc/iosapic.c
624
printk("\n");
drivers/parisc/iosapic.c
627
printk("iosapic_enable_irq(): sel ");
drivers/parisc/iosapic.c
633
printk(" %x", d1);
drivers/parisc/iosapic.c
636
printk("\n");
drivers/parisc/iosapic.c
705
printk(KERN_WARNING MODULE_NAME ": hpa not registered for %s\n",
drivers/parisc/iosapic.c
732
printk("iosapic: no IRTE for %s (IRQ not connected?)\n",
drivers/parisc/iosapic.c
955
printk(KERN_DEBUG MODULE_NAME ": Interrupt Routing Table (%lx entries)\n", num_entry);
drivers/parisc/iosapic.c
958
printk(KERN_DEBUG "%p : %2d %.8x %.8x %.8x %.8x\n",
drivers/parisc/iosapic.c
967
printk(KERN_DEBUG MODULE_NAME ": vector_info[%d] is at %p\n", vi->irqline, vi);
drivers/parisc/iosapic.c
968
printk(KERN_DEBUG "\t\tstatus: %.4x\n", vi->status);
drivers/parisc/iosapic.c
969
printk(KERN_DEBUG "\t\ttxn_irq: %d\n", vi->txn_irq);
drivers/parisc/iosapic.c
970
printk(KERN_DEBUG "\t\ttxn_addr: %lx\n", vi->txn_addr);
drivers/parisc/iosapic.c
971
printk(KERN_DEBUG "\t\ttxn_data: %lx\n", vi->txn_data);
drivers/parisc/iosapic.c
972
printk(KERN_DEBUG "\t\teoi_addr: %p\n", vi->eoi_addr);
drivers/parisc/iosapic.c
973
printk(KERN_DEBUG "\t\teoi_data: %x\n", vi->eoi_data);
drivers/parisc/iosapic.c
980
printk(KERN_DEBUG MODULE_NAME ": io_sapic_info at %p\n", isi);
drivers/parisc/iosapic.c
981
printk(KERN_DEBUG "\t\tisi_hpa: %lx\n", isi->isi_hpa);
drivers/parisc/iosapic.c
982
printk(KERN_DEBUG "\t\tisi_status: %x\n", isi->isi_status);
drivers/parisc/iosapic.c
983
printk(KERN_DEBUG "\t\tisi_version: %x\n", isi->isi_version);
drivers/parisc/iosapic.c
984
printk(KERN_DEBUG "\t\tisi_vector: %p\n", isi->isi_vector);
drivers/parisc/lasi.c
174
printk(KERN_INFO "%s version %d at 0x%lx found.\n",
drivers/parisc/lasi.c
186
printk(KERN_ERR "%s(): cannot get GSC irq\n",
drivers/parisc/lba_pci.c
1107
printk(KERN_WARNING MODULE_NAME
drivers/parisc/lba_pci.c
1131
printk(KERN_WARNING MODULE_NAME
drivers/parisc/lba_pci.c
1154
printk(KERN_WARNING MODULE_NAME
drivers/parisc/lba_pci.c
1361
printk(KERN_DEBUG "LBA %lx STAT_CTL %Lx ERROR_CFG %Lx STATUS %Lx DMA_CTL %Lx\n",
drivers/parisc/lba_pci.c
1367
printk(KERN_DEBUG " ARB mask %Lx pri %Lx mode %Lx mtlt %Lx\n",
drivers/parisc/lba_pci.c
1372
printk(KERN_DEBUG " HINT cfg 0x%Lx\n",
drivers/parisc/lba_pci.c
1374
printk(KERN_DEBUG " HINT reg ");
drivers/parisc/lba_pci.c
1377
printk(" %Lx", READ_REG64(d->hba.base_addr + i));
drivers/parisc/lba_pci.c
1379
printk("\n");
drivers/parisc/lba_pci.c
1393
printk(KERN_DEBUG "NOTICE: PCI bus reset still asserted! (clearing)\n");
drivers/parisc/lba_pci.c
1398
printk(KERN_DEBUG "NOTICE: LBA in SMART mode! (cleared)\n");
drivers/parisc/lba_pci.c
1443
printk(KERN_DEBUG "NOTICE: Enabling PCI Arbitration\n");
drivers/parisc/lba_pci.c
1501
printk(KERN_INFO "Elroy version %s (0x%x) found at 0x%lx\n",
drivers/parisc/lba_pci.c
1505
printk(KERN_WARNING "Can't support LBA older than "
drivers/parisc/lba_pci.c
1530
printk(KERN_INFO "%s version TR%d.%d (0x%x) found at 0x%lx\n",
drivers/parisc/lba_pci.c
1536
printk(KERN_ERR "Unknown LBA found at 0x%lx\n",
drivers/parisc/lba_pci.c
1551
printk(KERN_ERR "lba_init_chip - couldn't alloc lba_device\n");
drivers/parisc/lba_pci.c
1605
printk(KERN_WARNING "LBA: lmmio_space [%lx/%lx] duplicate!\n",
drivers/parisc/lba_pci.c
166
printk(KERN_DEBUG "(%p)", r->parent);
drivers/parisc/lba_pci.c
167
for (i = d; i ; --i) printk(" ");
drivers/parisc/lba_pci.c
168
printk(KERN_DEBUG "%p [%lx,%lx]/%lx\n", r,
drivers/parisc/lba_pci.c
60
#define DBG(x...) printk(x)
drivers/parisc/lba_pci.c
607
printk(KERN_WARNING "LBA: Truncating lmmio_space [%lx/%lx] "
drivers/parisc/lba_pci.c
66
#define DBG_PORT(x...) printk(x)
drivers/parisc/lba_pci.c
72
#define DBG_CFG(x...) printk(x)
drivers/parisc/lba_pci.c
758
printk("FAILED: lba_fixup_bus() request for "
drivers/parisc/lba_pci.c
771
printk(KERN_ERR "FAILED: lba_fixup_bus() request for "
drivers/parisc/lba_pci.c
78
#define DBG_PAT(x...) printk(x)
drivers/parisc/lba_pci.c
783
printk("FAILED: lba_fixup_bus() request for "
drivers/parisc/led.c
547
printk(KERN_INFO "LED: failed to register LEDs\n");
drivers/parisc/pdc_stable.c
1067
printk(KERN_INFO PDCS_PREFIX " facility v%s\n", PDCS_VERSION);
drivers/parisc/pdc_stable.c
1111
printk(KERN_INFO PDCS_PREFIX " bailing out\n");
drivers/parisc/pdc_stable.c
307
printk(KERN_WARNING "%s: attempt to set invalid \"%s\" "
drivers/parisc/pdc_stable.c
327
printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" path to \"%s\"\n",
drivers/parisc/pdc_stable.c
39
#define DPRINTK(fmt, args...) printk(KERN_DEBUG fmt, ## args)
drivers/parisc/pdc_stable.c
420
printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" layers to \"%s\"\n",
drivers/parisc/pdc_stable.c
813
printk(KERN_INFO PDCS_PREFIX ": changed \"%s\" to \"%s\"\n",
drivers/parisc/pdc_stable.c
820
printk(KERN_WARNING "%s: Parse error: expect \"n\" (n == 0 or 1)\n", __func__);
drivers/parisc/power.c
144
printk(KERN_INFO KTHREAD_NAME ": Shutdown request aborted.\n");
drivers/parisc/power.c
162
printk(KERN_CRIT "POWERFAIL INTERRUPTION !\n");
drivers/parisc/power.c
220
case 0: printk(KERN_INFO DRIVER_NAME ": Gecko-style soft power switch enabled.\n");
drivers/parisc/power.c
223
case -1UL: printk(KERN_INFO DRIVER_NAME ": Soft power switch support not available.\n");
drivers/parisc/power.c
226
default: printk(KERN_INFO DRIVER_NAME ": Soft power switch at 0x%08lx enabled.\n",
drivers/parisc/power.c
238
printk(KERN_ERR DRIVER_NAME ": thread creation failed. Driver not loaded.\n");
drivers/parisc/power.c
60
printk(KERN_ALERT KTHREAD_NAME ": Shutdown requested...\n");
drivers/parisc/power.c
67
printk(KERN_INFO KTHREAD_NAME ": %s\n", msg);
drivers/parisc/sba_iommu.c
1288
printk("WARNING: IOV space overlaps local config and interrupt message, truncating\n");
drivers/parisc/sba_iommu.c
1383
printk(KERN_INFO "%s: reserving %dMb of IOVA space for agpgart\n",
drivers/parisc/sba_iommu.c
1562
printk("sba_hw_init(): mem_boot 0x%x 0x%x 0x%x 0x%x\n", PAGE0->mem_boot.hpa,
drivers/parisc/sba_iommu.c
1777
printk(KERN_INFO MODULE_NAME " FDC/SYNC required.\n");
drivers/parisc/sba_iommu.c
1779
printk(KERN_INFO MODULE_NAME " IOC has cache coherent PDIR.\n");
drivers/parisc/sba_iommu.c
1939
printk(KERN_INFO "%s found %s at 0x%llx\n",
drivers/parisc/sba_iommu.c
1944
printk(KERN_ERR MODULE_NAME " - couldn't alloc sba_device\n");
drivers/parisc/sba_iommu.c
209
printk(KERN_DEBUG "SBA: %s rp %p bit %d rval 0x%lx\n",
drivers/parisc/sba_iommu.c
215
printk(KERN_DEBUG "%s %2d %p %016Lx\n",
drivers/parisc/sba_iommu.c
222
printk(KERN_DEBUG "%s", msg);
drivers/parisc/sba_iommu.c
281
printk(KERN_DEBUG " %d : %08lx/%05x %p/%05x\n",
drivers/parisc/sba_iommu.c
679
printk(KERN_ERR MODULE_NAME ": EISA/ISA/et al not supported\n");
drivers/parisc/sba_iommu.c
72
#define DBG_INIT(x...) printk(x)
drivers/parisc/sba_iommu.c
78
#define DBG_RUN(x...) printk(x)
drivers/parisc/sba_iommu.c
84
#define DBG_RUN_SG(x...) printk(x)
drivers/parisc/sba_iommu.c
91
#define DBG_RES(x...) printk(x)
drivers/parisc/superio.c
121
printk(KERN_ERR PFX "slave interrupted!\n");
drivers/parisc/superio.c
132
printk(KERN_WARNING PFX "spurious interrupt!\n");
drivers/parisc/superio.c
168
printk(KERN_INFO PFX "Found NS87560 Legacy I/O device at %s (IRQ %i)\n",
drivers/parisc/superio.c
173
printk(KERN_INFO PFX "Serial port 1 at 0x%x\n", sio->sp1_base);
drivers/parisc/superio.c
177
printk(KERN_INFO PFX "Serial port 2 at 0x%x\n", sio->sp2_base);
drivers/parisc/superio.c
181
printk(KERN_INFO PFX "Parallel port at 0x%x\n", sio->pp_base);
drivers/parisc/superio.c
185
printk(KERN_INFO PFX "Floppy controller at 0x%x\n", sio->fdc_base);
drivers/parisc/superio.c
188
printk(KERN_INFO PFX "ACPI at 0x%x\n", sio->acpi_base);
drivers/parisc/superio.c
269
printk(KERN_INFO PFX "USB regulator enabled\n");
drivers/parisc/superio.c
271
printk(KERN_ERR PFX "USB regulator not initialized!\n");
drivers/parisc/superio.c
276
printk(KERN_ERR PFX "could not get irq\n");
drivers/parisc/superio.c
291
printk(KERN_ERR PFX "Illegal irq number.\n");
drivers/parisc/superio.c
309
printk(KERN_ERR PFX "Illegal irq number (%d).\n", irq);
drivers/parisc/superio.c
347
printk(KERN_DEBUG "superio_fixup_irq(%s) ven 0x%x dev 0x%x from %ps\n",
drivers/parisc/superio.c
403
printk(KERN_WARNING PFX "Register Serial #0 failed.\n");
drivers/parisc/superio.c
413
printk(KERN_WARNING PFX "Register Serial #1 failed.\n");
drivers/parisc/superio.c
428
printk(KERN_WARNING PFX "Probing parallel port failed.\n");
drivers/parisc/superio.c
441
printk("PCI: Enabled native mode for NS87415 (pif=0x%x)\n", prog);
drivers/parisc/superio.c
85
#define DBG_INIT(x...) printk(x)
drivers/parisc/wax.c
81
printk(KERN_INFO "%s at 0x%lx found.\n", wax->name, wax->hpa);
drivers/parisc/wax.c
89
printk(KERN_ERR "%s(): cannot get GSC irq\n",
drivers/parport/parport_gsc.c
239
printk(KERN_DEBUG "parport (0x%lx): no memory!\n", base);
drivers/parport/parport_gsc.c
245
printk(KERN_DEBUG "parport (0x%lx): no memory for ops!\n",
drivers/parport/parport_gsc.h
126
printk(KERN_DEBUG "%s (%s): use data_reverse for this!\n",
drivers/parport/parport_gsc.h
155
printk(KERN_DEBUG "%s (%s): use data_%s for this!\n",
drivers/parport/parport_gsc.h
72
printk(KERN_DEBUG "%s(%p,0x%02x)\n", __func__, p, d);
drivers/parport/parport_gsc.h
81
printk(KERN_DEBUG "%s(%p) = 0x%02x\n", __func__, p, val);
drivers/parport/parport_gsc.h
95
printk(KERN_DEBUG "%s(%02x,%02x): %02x -> %02x\n",
drivers/parport/parport_ip32.c
1663
printk(KERN_DEBUG PPIP32 "%s: BUSY timeout in %s\n",
drivers/parport/parport_ip32.c
1707
printk(KERN_DEBUG PPIP32 "%s: PError timeout in %s\n",
drivers/parport/parport_ip32.c
1744
printk(KERN_DEBUG PPIP32 "%s: BUSY timeout in %s\n",
drivers/parport/parport_ip32.c
269
# define pr_debug1(...) printk(KERN_DEBUG __VA_ARGS__)
drivers/parport/parport_ip32.c
302
do { if (verbose_probing) printk(__VA_ARGS__); } while (0)
drivers/parport/parport_ip32.c
324
printk(KERN_DEBUG PPIP32 "%s: state (%s):\n", p->name, str);
drivers/parport/parport_ip32.c
330
printk(KERN_DEBUG PPIP32 " ecr=0x%02x", ecr);
drivers/parport/parport_ip32.c
354
printk(KERN_DEBUG PPIP32 " cnfgA=0x%02x", cnfgA);
drivers/parport/parport_ip32.c
377
printk(KERN_DEBUG PPIP32 " cnfgB=0x%02x", cnfgB);
drivers/parport/parport_ip32.c
388
printk(KERN_DEBUG PPIP32 " dcr(%s)=0x%02x",
drivers/parport/parport_ip32.c
407
printk(KERN_DEBUG PPIP32 " dsr=0x%02x", dsr);
drivers/parport/parport_pc.c
1324
printk(KERN_DEBUG "Winbond Super-IO detection, now testing ports 3F0,370,250,4E,2E ...\n");
drivers/parport/parport_pc.c
1337
printk(KERN_DEBUG "SMSC Super-IO detection, now testing Ports 2F0, 370 ...\n");
drivers/parport/parport_pc.c
1349
printk(KERN_DEBUG "IT8705 Super-IO detection, now testing port 2E ...\n");
drivers/parport/parport_pc.c
148
printk(KERN_DEBUG "change_mode: but there's no ECR!\n");
drivers/parport/parport_pc.c
1612
printk(KERN_DEBUG "0x%lx: FIFO is %d bytes\n", pb->base, i);
drivers/parport/parport_pc.c
1626
printk(KERN_DEBUG "0x%lx: writeIntrThreshold is %d\n",
drivers/parport/parport_pc.c
1679
printk(KERN_DEBUG "0x%lx: PWord is %d bits\n",
drivers/parport/parport_pc.c
1682
printk(KERN_DEBUG "0x%lx: Interrupts are ISA-%s\n",
drivers/parport/parport_pc.c
1686
printk(KERN_DEBUG "0x%lx: ECP port cfgA=0x%02x cfgB=0x%02x\n",
drivers/parport/parport_pc.c
1688
printk(KERN_DEBUG "0x%lx: ECP settings irq=", pb->base);
drivers/parport/parport_pc.c
2456
printk(KERN_DEBUG "parport_pc: VIA 686A/8231 detected\n");
drivers/parport/parport_pc.c
2460
printk(KERN_DEBUG "parport_pc: setting SPP mode\n");
drivers/parport/parport_pc.c
2464
printk(KERN_DEBUG "parport_pc: setting PS/2 mode\n");
drivers/parport/parport_pc.c
2469
printk(KERN_DEBUG "parport_pc: setting EPP mode\n");
drivers/parport/parport_pc.c
2475
printk(KERN_DEBUG "parport_pc: setting ECP mode\n");
drivers/parport/parport_pc.c
2480
printk(KERN_DEBUG "parport_pc: setting EPP+ECP mode\n");
drivers/parport/parport_pc.c
2486
printk(KERN_DEBUG "parport_pc: probing current configuration\n");
drivers/parport/parport_pc.c
2521
printk(KERN_DEBUG "parport_pc: Current parallel port base: 0x%X\n",
drivers/parport/parport_pc.c
2526
printk(KERN_DEBUG "parport_pc: Parallel port base changed to 0x378\n");
drivers/parport/parport_pc.c
2909
printk(KERN_DEBUG "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx)\n",
drivers/parport/parport_pc.c
2913
printk(KERN_DEBUG "PCI parallel port detected: %04x:%04x, I/O at %#lx(%#lx), IRQ %d\n",
drivers/parport/parport_pc.c
301
printk(KERN_DEBUG "%s: EPP timeout occurred while talking to w91284pic (should not have done)\n",
drivers/parport/parport_pc.c
3188
printk(KERN_DEBUG "parport_pc.c: Specified parameter parport_init_mode=%s\n",
drivers/parport/parport_pc.c
516
printk(KERN_DEBUG "Somebody wants the port\n");
drivers/parport/parport_pc.c
532
printk(KERN_DEBUG "FIFO write timed out\n");
drivers/parport/parport_pc.c
661
printk(KERN_DEBUG "DMA write timed out\n");
drivers/parport/parport_pc.c
681
printk(KERN_DEBUG "Somebody wants the port\n");
drivers/parport/parport_pc.c
741
printk(KERN_DEBUG "%s: Warning change_mode ECR_PPF failed\n",
drivers/parport/parport_pc.c
763
printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name);
drivers/parport/parport_pc.c
785
printk(KERN_DEBUG "%s: BUSY timeout (%d) in compat_write_block_pio\n",
drivers/parport/parport_pc.c
824
printk(KERN_DEBUG "%s: PError timeout (%d) in ecp_write_block_pio\n",
drivers/parport/parport_pc.c
837
printk(KERN_DEBUG "%s: Warning change_mode ECR_ECP failed\n",
drivers/parport/parport_pc.c
858
printk(KERN_DEBUG "%s: FIFO is stuck\n", port->name);
drivers/parport/parport_pc.c
881
printk(KERN_DEBUG "%s: PE,1 timeout (%d) in ecp_write_block_pio\n",
drivers/parport/parport_pc.c
891
printk(KERN_DEBUG "%s: PE,2 timeout (%d) in ecp_write_block_pio\n",
drivers/parport/parport_pc.c
899
printk(KERN_DEBUG "%s: BUSY timeout (%d) in ecp_write_block_pio\n",
drivers/parport/parport_sunbpp.c
46
#define dprintk(x) printk x
drivers/parport/probe.c
176
printk(KERN_DEBUG "%s: reported broken Device ID length of %#zX bytes\n",
drivers/parport/probe.c
199
printk(KERN_DEBUG "%s: Device ID was %zd bytes while device told it would be %d bytes\n",
drivers/parport/probe.c
210
printk(KERN_DEBUG "%s: Device ID reading stopped before device told data not available. Current idlen %u of %u, len bytes %02X %02X\n",
drivers/parport/share.c
1091
printk(KERN_DEBUG "%s: parport_claim() returned -EAGAIN\n",
drivers/parport/share.c
1116
printk(KERN_DEBUG "%s: didn't sleep in parport_claim_or_block()\n",
drivers/parport/share.c
1123
printk(KERN_DEBUG "%s: exiting parport_claim_or_block but %s owns port!\n",
drivers/parport/share.c
846
printk(KERN_DEBUG "%s: %s forgot to release port\n",
drivers/pci/hotplug/acpi_pcihp.c
24
#define dbg(fmt, arg...) do { if (debug_acpi) printk(KERN_DEBUG "%s: %s: " fmt, MY_NAME, __func__, ## arg); } while (0)
drivers/pci/hotplug/acpi_pcihp.c
25
#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg)
drivers/pci/hotplug/acpi_pcihp.c
26
#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg)
drivers/pci/hotplug/acpi_pcihp.c
27
#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg)
drivers/pci/hotplug/acpi_pcihp.c
49
printk(KERN_ERR "%s:%s OSHP fails=0x%x\n",
drivers/pci/hotplug/cpci_hotplug_core.c
35
printk(KERN_DEBUG "%s: " format "\n", \
drivers/pci/hotplug/cpci_hotplug_core.c
38
#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME, ## arg)
drivers/pci/hotplug/cpci_hotplug_core.c
39
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME, ## arg)
drivers/pci/hotplug/cpci_hotplug_core.c
40
#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME, ## arg)
drivers/pci/hotplug/cpci_hotplug_pci.c
25
printk(KERN_DEBUG "%s: " format "\n", \
drivers/pci/hotplug/cpci_hotplug_pci.c
28
#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME, ## arg)
drivers/pci/hotplug/cpci_hotplug_pci.c
29
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME, ## arg)
drivers/pci/hotplug/cpci_hotplug_pci.c
30
#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME, ## arg)
drivers/pci/hotplug/cpcihp_generic.c
38
printk(KERN_DEBUG "%s: " format "\n", \
drivers/pci/hotplug/cpcihp_generic.c
41
#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME, ## arg)
drivers/pci/hotplug/cpcihp_generic.c
42
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME, ## arg)
drivers/pci/hotplug/cpcihp_generic.c
43
#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME, ## arg)
drivers/pci/hotplug/cpcihp_zt5550.c
33
printk(KERN_DEBUG "%s: " format "\n", \
drivers/pci/hotplug/cpcihp_zt5550.c
36
#define err(format, arg...) printk(KERN_ERR "%s: " format "\n", MY_NAME, ## arg)
drivers/pci/hotplug/cpcihp_zt5550.c
37
#define info(format, arg...) printk(KERN_INFO "%s: " format "\n", MY_NAME, ## arg)
drivers/pci/hotplug/cpcihp_zt5550.c
38
#define warn(format, arg...) printk(KERN_WARNING "%s: " format "\n", MY_NAME, ## arg)
drivers/pci/hotplug/cpqphp.h
25
#define dbg(fmt, arg...) do { if (cpqhp_debug) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0)
drivers/pci/hotplug/cpqphp.h
26
#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg)
drivers/pci/hotplug/cpqphp.h
27
#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg)
drivers/pci/hotplug/cpqphp.h
28
#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg)
drivers/pci/hotplug/cpqphp_core.c
772
printk(KERN_ERR MY_NAME ": cannot enable PCI device %s (%d)\n",
drivers/pci/hotplug/ibmphp.h
29
#define debug(fmt, arg...) do { if (ibmphp_debug == 1) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0)
drivers/pci/hotplug/ibmphp.h
30
#define debug_pci(fmt, arg...) do { if (ibmphp_debug) printk(KERN_DEBUG "%s: " fmt, MY_NAME, ## arg); } while (0)
drivers/pci/hotplug/ibmphp.h
31
#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg)
drivers/pci/hotplug/ibmphp.h
32
#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg)
drivers/pci/hotplug/ibmphp.h
33
#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg)
drivers/pci/hotplug/pci_hotplug_core.c
31
#define dbg(fmt, arg...) do { if (debug) printk(KERN_DEBUG "%s: %s: " fmt, MY_NAME, __func__, ## arg); } while (0)
drivers/pci/hotplug/pci_hotplug_core.c
32
#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg)
drivers/pci/hotplug/pci_hotplug_core.c
33
#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg)
drivers/pci/hotplug/pci_hotplug_core.c
34
#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg)
drivers/pci/hotplug/rpadlpar_core.c
149
printk(KERN_ERR "%s: failed to create pci dev for %pOF\n",
drivers/pci/hotplug/rpadlpar_core.c
185
printk(KERN_ERR "%s: unable to add bus %s\n", __func__,
drivers/pci/hotplug/rpadlpar_core.c
191
printk(KERN_ERR "%s: unexpected header type %d, unable to add bus %s\n",
drivers/pci/hotplug/rpadlpar_core.c
198
printk(KERN_ERR "%s: unable to add hotplug slot %s\n",
drivers/pci/hotplug/rpadlpar_core.c
217
printk(KERN_ERR "%s: unable to remove hotplug slot %s\n",
drivers/pci/hotplug/rpadlpar_core.c
247
printk(KERN_ERR "%s: unable to add hotplug slot %s\n",
drivers/pci/hotplug/rpadlpar_core.c
265
printk(KERN_ERR
drivers/pci/hotplug/rpadlpar_core.c
314
printk(KERN_INFO "%s: slot %s added\n", DLPAR_MODULE_NAME, drc_name);
drivers/pci/hotplug/rpadlpar_core.c
379
printk(KERN_ERR
drivers/pci/hotplug/rpadlpar_core.c
392
printk(KERN_ERR "%s: failed to unmap bus range\n",
drivers/pci/hotplug/rpadlpar_core.c
449
printk(KERN_INFO "%s: slot %s removed\n", DLPAR_MODULE_NAME, drc_name);
drivers/pci/hotplug/rpadlpar_core.c
466
printk(KERN_WARNING "%s: partition not DLPAR capable\n",
drivers/pci/hotplug/rpaphp.h
39
printk(KERN_DEBUG "%s: " format, \
drivers/pci/hotplug/rpaphp.h
42
#define err(format, arg...) printk(KERN_ERR "%s: " format, MY_NAME, ## arg)
drivers/pci/hotplug/rpaphp.h
43
#define info(format, arg...) printk(KERN_INFO "%s: " format, MY_NAME, ## arg)
drivers/pci/hotplug/rpaphp.h
44
#define warn(format, arg...) printk(KERN_WARNING "%s: " format, MY_NAME, ## arg)
drivers/pci/pci-acpi.c
633
printk(KERN_WARNING
drivers/pcmcia/db1xxx_ss.c
265
printk(KERN_INFO "pcmcia%d unsupported Vcc %d\n",
drivers/pcmcia/db1xxx_ss.c
280
printk(KERN_INFO "pcmcia%d unsupported Vpp %d\n",
drivers/pcmcia/db1xxx_ss.c
287
printk(KERN_INFO "pcmcia%d bad Vcc/Vpp combo (%d %d)\n",
drivers/pcmcia/db1xxx_ss.c
453
printk(KERN_INFO "db1xxx-ss: unknown board %d!\n", bid);
drivers/pcmcia/db1xxx_ss.c
495
printk(KERN_ERR "pcmcia%d has no 'pseudo-attr' resource!\n",
drivers/pcmcia/db1xxx_ss.c
504
printk(KERN_ERR "pcmcia%d has no 'pseudo-mem' resource!\n",
drivers/pcmcia/db1xxx_ss.c
513
printk(KERN_ERR "pcmcia%d has no 'pseudo-io' resource!\n",
drivers/pcmcia/db1xxx_ss.c
531
printk(KERN_ERR "pcmcia%d: cannot remap IO area\n",
drivers/pcmcia/db1xxx_ss.c
550
printk(KERN_ERR "pcmcia%d cannot setup interrupts\n",
drivers/pcmcia/db1xxx_ss.c
559
printk(KERN_ERR "pcmcia%d failed to register\n", sock->nr);
drivers/pcmcia/db1xxx_ss.c
563
printk(KERN_INFO "Alchemy Db/Pb1xxx pcmcia%d @ io/attr/mem %09llx"
drivers/pcmcia/ds.c
1426
printk(KERN_WARNING "pcmcia: bus_register error: %d\n", ret);
drivers/pcmcia/ds.c
1431
printk(KERN_WARNING
drivers/pcmcia/ds.c
50
printk(KERN_DEBUG "pcmcia: %s lacks a requisite callback "
drivers/pcmcia/ds.c
62
printk(KERN_DEBUG "pcmcia: %s: invalid hash for "
drivers/pcmcia/ds.c
66
printk(KERN_DEBUG "pcmcia: see "
drivers/pcmcia/pd6729.c
184
printk(KERN_ERR "pd6729: infinite eventloop "
drivers/pcmcia/pd6729.c
599
printk(KERN_INFO "pd6729: PCI card interrupts, "
drivers/pcmcia/pd6729.c
611
printk(KERN_INFO "pd6729: ISA irqs = ");
drivers/pcmcia/pd6729.c
614
printk("%s%d", ((mask & ((1<<i)-1)) ? "," : ""), i);
drivers/pcmcia/pd6729.c
617
printk("none!");
drivers/pcmcia/pd6729.c
619
printk(" polling status changes.\n");
drivers/pcmcia/pxa2xx_sharpsl.c
117
printk(KERN_ERR "sharpsl_pcmcia_configure_socket(): bad Vcc %u\n", state->Vcc);
drivers/pcmcia/pxa2xx_sharpsl.c
122
printk(KERN_ERR "CF slot cannot support Vpp %u\n", state->Vpp);
drivers/pcmcia/pxa2xx_sharpsl.c
99
printk(KERN_ERR "sharpsl_pcmcia_socket_state(): CPR=%04X, Low voltage!\n", cpr);
drivers/pcmcia/rsrc_nonstatic.c
122
printk(KERN_WARNING "out of memory to update resources\n");
drivers/pcmcia/rsrc_nonstatic.c
160
printk(KERN_WARNING "out of memory to update resources\n");
drivers/pcmcia/sa1100_h3600.c
106
printk(KERN_ERR "h3600_pcmcia: unrecognized Vcc %u.%uV\n",
drivers/pcmcia/sa1111_jornada720.c
109
printk(KERN_ERR "%s(): slot cannot support VPP %u\n",
drivers/pcmcia/sa1111_jornada720.c
67
printk(KERN_INFO "%s(): config socket %d vcc %d vpp %d\n", __func__,
drivers/pcmcia/soc_common.c
578
printk(KERN_ERR "%s(): map (%d) out of range\n", __func__,
drivers/pcmcia/soc_common.c
71
printk(KERN_DEBUG "skt%u: %s: %pV", skt->nr, func, &vaf);
drivers/pcmcia/xxs1500_ss.c
291
printk(KERN_INFO "MyCable XXS1500 PCMCIA socket services\n");
drivers/platform/x86/dell/dcdbas.c
623
printk(KERN_WARNING "Please wait for shutdown "
drivers/platform/x86/hdaps.c
231
printk(KERN_DEBUG "hdaps: initial latch check good (0x%02x)\n",
drivers/platform/x86/lenovo/thinkpad_acpi.c
447
printk(KERN_DEBUG pr_fmt("%s: " format), \
drivers/platform/x86/lenovo/thinkpad_acpi.c
462
printk(KERN_DEBUG pr_fmt("%s: access by process with PID %d\n"),
drivers/platform/x86/lenovo/thinkpad_acpi.c
470
printk(KERN_DEBUG pr_fmt("%s: PID %d: " format), \
drivers/platform/x86/mxm-wmi.c
40
printk("calling mux switch %d\n", adapter);
drivers/platform/x86/mxm-wmi.c
47
printk("mux switched %d\n", status);
drivers/platform/x86/mxm-wmi.c
63
printk("calling mux switch %d\n", adapter);
drivers/platform/x86/mxm-wmi.c
70
printk("mux mutex set switched %d\n", status);
drivers/platform/x86/samsung-laptop.c
1425
printk(KERN_DEBUG "This computer supports SABI==%x\n",
drivers/platform/x86/samsung-laptop.c
1428
printk(KERN_DEBUG "SABI header:\n");
drivers/platform/x86/samsung-laptop.c
1429
printk(KERN_DEBUG " SMI Port Number = 0x%04x\n",
drivers/platform/x86/samsung-laptop.c
1431
printk(KERN_DEBUG " SMI Interface Function = 0x%02x\n",
drivers/platform/x86/samsung-laptop.c
1433
printk(KERN_DEBUG " SMI enable memory buffer = 0x%02x\n",
drivers/platform/x86/samsung-laptop.c
1435
printk(KERN_DEBUG " SMI restore memory buffer = 0x%02x\n",
drivers/platform/x86/samsung-laptop.c
1437
printk(KERN_DEBUG " SABI data offset = 0x%04x\n",
drivers/platform/x86/samsung-laptop.c
1439
printk(KERN_DEBUG " SABI data segment = 0x%04x\n",
drivers/platform/x86/samsung-laptop.c
1442
printk(KERN_DEBUG " SABI pointer = 0x%08x\n", ifaceP);
drivers/platform/x86/samsung-q10.c
88
printk(KERN_INFO KBUILD_MODNAME ": found model '%s'\n", id->ident);
drivers/pnp/isapnp/core.c
1016
printk(KERN_INFO
drivers/pnp/isapnp/core.c
1039
printk(KERN_INFO
drivers/pnp/isapnp/core.c
1043
printk(KERN_INFO "isapnp: No Plug & Play card found\n");
drivers/pnp/isapnp/core.c
962
printk(KERN_INFO "isapnp: ISA Plug & Play support disabled\n");
drivers/pnp/isapnp/core.c
971
printk(KERN_ERR "isapnp: Index Register 0x%x already used\n",
drivers/pnp/isapnp/core.c
977
printk(KERN_ERR
drivers/pnp/isapnp/core.c
994
printk(KERN_INFO "isapnp: Scanning for PnP cards...\n");
drivers/pnp/isapnp/core.c
998
printk(KERN_ERR
drivers/pnp/pnpacpi/core.c
302
printk(KERN_INFO "pnp: PnP ACPI: disabled\n");
drivers/pnp/pnpacpi/core.c
305
printk(KERN_INFO "pnp: PnP ACPI init\n");
drivers/pnp/pnpacpi/core.c
308
printk(KERN_INFO "pnp: PnP ACPI: found %d devices\n", num);
drivers/pnp/pnpbios/bioscalls.c
143
printk(KERN_ERR
drivers/pnp/pnpbios/bioscalls.c
145
printk(KERN_ERR
drivers/pnp/pnpbios/bioscalls.c
147
printk(KERN_ERR
drivers/pnp/pnpbios/bioscalls.c
158
printk(KERN_ERR "PnPBIOS: %s: function successful\n", module);
drivers/pnp/pnpbios/bioscalls.c
161
printk(KERN_ERR "PnPBIOS: %s: unable to set static resources\n",
drivers/pnp/pnpbios/bioscalls.c
165
printk(KERN_ERR "PnPBIOS: %s: invalid function number passed\n",
drivers/pnp/pnpbios/bioscalls.c
169
printk(KERN_ERR
drivers/pnp/pnpbios/bioscalls.c
174
printk(KERN_ERR "PnPBIOS: %s: invalid handle\n", module);
drivers/pnp/pnpbios/bioscalls.c
177
printk(KERN_ERR "PnPBIOS: %s: invalid parameters were passed\n",
drivers/pnp/pnpbios/bioscalls.c
181
printk(KERN_ERR "PnPBIOS: %s: unable to set resources\n",
drivers/pnp/pnpbios/bioscalls.c
185
printk(KERN_ERR "PnPBIOS: %s: no events are pending\n", module);
drivers/pnp/pnpbios/bioscalls.c
188
printk(KERN_ERR "PnPBIOS: %s: the system is not docked\n",
drivers/pnp/pnpbios/bioscalls.c
192
printk(KERN_ERR
drivers/pnp/pnpbios/bioscalls.c
197
printk(KERN_ERR
drivers/pnp/pnpbios/bioscalls.c
202
printk(KERN_ERR
drivers/pnp/pnpbios/bioscalls.c
207
printk(KERN_ERR
drivers/pnp/pnpbios/bioscalls.c
212
printk(KERN_ERR "PnPBIOS: %s: the buffer passed is too small\n",
drivers/pnp/pnpbios/bioscalls.c
216
printk(KERN_ERR "PnPBIOS: %s: use ESCD instead\n", module);
drivers/pnp/pnpbios/bioscalls.c
219
printk(KERN_ERR "PnPBIOS: %s: the message is unsupported\n",
drivers/pnp/pnpbios/bioscalls.c
223
printk(KERN_ERR "PnPBIOS: %s: a hardware failure has occurred\n",
drivers/pnp/pnpbios/bioscalls.c
227
printk(KERN_ERR "PnPBIOS: %s: unexpected status 0x%x\n", module,
drivers/pnp/pnpbios/core.c
172
printk(KERN_WARNING "PnPBIOS: disabling dock monitoring.\n");
drivers/pnp/pnpbios/core.c
179
printk(KERN_INFO
drivers/pnp/pnpbios/core.c
260
printk(KERN_ERR
drivers/pnp/pnpbios/core.c
373
printk(KERN_ERR
drivers/pnp/pnpbios/core.c
382
printk(KERN_INFO
drivers/pnp/pnpbios/core.c
429
printk(KERN_INFO "PnPBIOS: Scanning system for PnP BIOS support...\n");
drivers/pnp/pnpbios/core.c
441
printk(KERN_INFO
drivers/pnp/pnpbios/core.c
446
printk(KERN_ERR
drivers/pnp/pnpbios/core.c
453
printk(KERN_ERR
drivers/pnp/pnpbios/core.c
458
printk(KERN_WARNING
drivers/pnp/pnpbios/core.c
464
printk(KERN_INFO
drivers/pnp/pnpbios/core.c
473
printk(KERN_INFO "PnPBIOS: PnP BIOS support was not detected.\n");
drivers/pnp/pnpbios/core.c
479
printk(KERN_WARNING "%s detected. Disabling PnPBIOS\n", d->ident);
drivers/pnp/pnpbios/core.c
511
printk(KERN_INFO "PnPBIOS: Disabled\n");
drivers/pnp/pnpbios/core.c
518
printk(KERN_INFO "PnPBIOS: Disabled by ACPI PNP\n");
drivers/pnp/pnpbios/core.c
533
printk(KERN_ERR
drivers/pnp/pnpbios/core.c
541
printk(KERN_ERR
drivers/pnp/pnpbios/core.c
549
printk(KERN_ERR "PnPBIOS: Failed to create proc interface.\n");
drivers/pnp/pnpbios/proc.c
141
printk(KERN_ERR
drivers/pnp/pnpbios/proc.c
76
printk(KERN_ERR
drivers/pnp/pnpbios/proc.c
95
printk(KERN_ERR "PnPBIOS: %s: ESCD size reported by"
drivers/power/supply/apm_power.c
165
printk(KERN_ERR "Unsupported source: %d\n", source);
drivers/power/supply/apm_power.c
246
printk(KERN_ERR "Unsupported source: %d\n", source);
drivers/power/supply/apm_power.c
359
printk(KERN_INFO "APM Battery Driver\n");
drivers/power/supply/collie_battery.c
162
printk(KERN_NOTICE "%s not present\n", psy->desc->name);
drivers/power/supply/olpc_battery.c
665
printk(KERN_NOTICE "OLPC EC version 0x%02x too old for "
drivers/ps3/ps3av.c
1039
printk(KERN_ERR
drivers/ps3/ps3av.c
164
printk(KERN_ERR
drivers/ps3/ps3av.c
198
printk(KERN_ERR "%s: ps3_vuart_read failed %d\n",
drivers/ps3/ps3av.c
311
printk(KERN_ERR
drivers/ps3/ps3av.c
321
printk(KERN_ERR "%s: put_return_status() failed (result=%d)\n",
drivers/ps3/ps3av.c
331
printk(KERN_ERR "%s: failed cid:%x res:%d\n", __func__, cid, res);
drivers/ps3/ps3av.c
522
printk(KERN_WARNING
drivers/ps3/ps3av.c
846
printk(KERN_ERR "%s: invalid id :%d\n", __func__, id);
drivers/ps3/ps3av.c
883
printk(KERN_ERR "%s: invalid mode %d\n", __func__, id);
drivers/ps3/ps3av.c
968
printk(KERN_ERR "%s: ps3av_cmd_init failed %d\n", __func__,
drivers/ps3/ps3av.c
978
printk(KERN_ERR "%s: invalid id :%d\n", __func__, id);
drivers/ps3/ps3av_cmd.c
160
printk(KERN_ERR "PS3AV_CID_VIDEO_INIT: failed %x\n", res);
drivers/ps3/ps3av_cmd.c
174
printk(KERN_ERR "PS3AV_CID_AUDIO_INIT: failed %x\n", res);
drivers/ps3/ps3av_cmd.c
189
printk(KERN_ERR "PS3AV_CID_AV_INIT: failed %x\n", res);
drivers/ps3/ps3av_cmd.c
208
printk(KERN_ERR "PS3AV_CID_AV_FIN: failed %x\n", res);
drivers/ps3/ps3av_cmd.c
236
printk(KERN_ERR "PS3AV_CID_AV_VIDEO_MUTE: failed %x\n", res);
drivers/ps3/ps3av_cmd.c
257
printk(KERN_ERR
drivers/ps3/ps3av_cmd.c
280
printk(KERN_ERR "PS3AV_CID_AV_TV_MUTE: failed %x port:%x\n",
drivers/ps3/ps3av_cmd.c
302
printk(KERN_ERR "PS3AV_CID_AV_ENABLE_EVENT: failed %x\n", res);
drivers/ps3/ps3av_cmd.c
322
printk(KERN_ERR "PS3AV_CID_AV_HDMI_MODE: failed %x\n", res);
drivers/ps3/ps3av_cmd.c
430
printk(KERN_ERR "PS3AV_CID_VIDEO_FORMAT: failed %x\n", res);
drivers/ps3/ps3av_cmd.c
460
printk(KERN_ERR "PS3AV_CID_AV_AUDIO_MUTE: failed %x\n", res);
drivers/ps3/ps3av_cmd.c
485
printk(KERN_ERR "%s failed, fs:%x\n", __func__, fs);
drivers/ps3/ps3av_cmd.c
533
printk(KERN_ERR "%s failed, vid:%x\n", __func__, video_vid);
drivers/ps3/ps3av_cmd.c
538
printk(KERN_ERR "%s failed, fs:%x\n", __func__, fs);
drivers/ps3/ps3av_cmd.c
559
printk(KERN_ERR "%s failed, source:%x\n", __func__, source);
drivers/ps3/ps3av_cmd.c
586
printk(KERN_ERR "%s failed, word_bits:%x\n", __func__,
drivers/ps3/ps3av_cmd.c
596
printk(KERN_ERR "%s failed, num_of_ch:%x\n", __func__,
drivers/ps3/ps3av_cmd.c
794
printk(KERN_ERR "PS3AV_CID_AUDIO_MODE: failed %x\n", res);
drivers/ps3/ps3av_cmd.c
823
printk(KERN_ERR "PS3AV_CID_AUDIO_MUTE: failed %x\n", res);
drivers/ps3/ps3av_cmd.c
846
printk(KERN_ERR "PS3AV_CID_AUDIO_ACTIVE:%x failed %x\n", cid,
drivers/ps3/ps3av_cmd.c
887
printk(KERN_ERR "PS3AV_CID_AV_GET_HW_CONF: failed %x\n", res);
drivers/ps3/ps3av_cmd.c
909
printk(KERN_ERR "PS3AV_CID_AV_GET_MONITOR_INFO: failed %x\n",
drivers/rapidio/rio-scan.c
1012
printk(KERN_INFO "RIO: master port %d link inactive\n",
drivers/rapidio/rio-scan.c
1070
printk(KERN_INFO "RIO: discover master port %d, %s\n", mport->id,
drivers/rapidio/rio-scan.c
1097
printk(KERN_ERR "RIO: Failed to allocate new net\n");
drivers/rapidio/rio-scan.c
1109
printk(KERN_INFO
drivers/rapidio/rio-scan.c
203
printk(KERN_INFO
drivers/rapidio/rio-scan.c
213
printk(KERN_INFO
drivers/rapidio/rio-scan.c
955
printk(KERN_INFO "RIO: enumerate master port %d, %s\n", mport->id,
drivers/rapidio/rio-scan.c
969
printk(KERN_INFO
drivers/rapidio/rio-scan.c
980
printk(KERN_ERR "RIO: failed to allocate new net\n");
drivers/rapidio/rio-scan.c
999
printk(KERN_INFO
drivers/resctrl/mpam_devices.c
2771
printk(KERN_INFO "MPAM enabled with %u PARTIDs and %u PMGs\n",
drivers/s390/cio/crw.c
80
printk(KERN_WARNING "%s: Code does not support more than two chained crws\n",
drivers/s390/cio/crw.c
83
printk(KERN_WARNING"%s: crw reports slct=%d, oflw=%d, "
drivers/s390/cio/crw.c
88
printk(KERN_WARNING"%s: This was crw number %x in the "
drivers/s390/cio/crw.c
98
printk(KERN_DEBUG "crw_info : CRW reports slct=%d, oflw=%d, "
drivers/s390/cio/device_fsm.c
52
printk(KERN_WARNING "cio: ccw device timeout occurred at %lx, "
drivers/s390/cio/device_fsm.c
54
printk(KERN_WARNING "cio: orb:\n");
drivers/s390/cio/device_fsm.c
57
printk(KERN_WARNING "cio: ccw device bus id: %s\n",
drivers/s390/cio/device_fsm.c
59
printk(KERN_WARNING "cio: subchannel bus id: %s\n",
drivers/s390/cio/device_fsm.c
61
printk(KERN_WARNING "cio: subchannel lpm: %02x, opm: %02x, "
drivers/s390/cio/device_fsm.c
65
printk(KERN_WARNING "cio: orb indicates transport mode\n");
drivers/s390/cio/device_fsm.c
66
printk(KERN_WARNING "cio: last tcw:\n");
drivers/s390/cio/device_fsm.c
71
printk(KERN_WARNING "cio: orb indicates command mode\n");
drivers/s390/cio/device_fsm.c
76
printk(KERN_WARNING "cio: last channel program "
drivers/s390/cio/device_fsm.c
79
printk(KERN_WARNING "cio: last channel program:\n");
drivers/s390/cio/device_fsm.c
85
printk(KERN_WARNING "cio: ccw device state: %d\n",
drivers/s390/cio/device_fsm.c
87
printk(KERN_WARNING "cio: store subchannel returned: cc=%d\n", cc);
drivers/s390/cio/device_fsm.c
88
printk(KERN_WARNING "cio: schib:\n");
drivers/s390/cio/device_fsm.c
91
printk(KERN_WARNING "cio: ccw device flags:\n");
drivers/s390/net/ctcm_main.h
41
#define ctcm_pr_debug(fmt, arg...) printk(KERN_DEBUG fmt, ##arg)
drivers/s390/net/ctcm_main.h
46
printk(KERN_DEBUG fmt, ##arg); \
drivers/s390/net/ctcm_main.h
52
printk(KERN_DEBUG fmt, ##arg); \
drivers/s390/net/ctcm_sysfs.c
107
printk(KERN_INFO "Statistics for %s:\n%s",
drivers/s390/net/fsm.c
103
printk(KERN_DEBUG " S=%s\n",
drivers/s390/net/fsm.c
106
printk(KERN_DEBUG " S=%s E=%s\n",
drivers/s390/net/fsm.c
138
printk(KERN_DEBUG "fsm(%s): Timer %p expired\n",
drivers/s390/net/fsm.c
149
printk(KERN_DEBUG "fsm(%s): Create timer %p\n", fi->name,
drivers/s390/net/fsm.c
159
printk(KERN_DEBUG "fsm(%s): Delete timer %p\n", this->fi->name,
drivers/s390/net/fsm.c
170
printk(KERN_DEBUG "fsm(%s): Add timer %p %dms\n",
drivers/s390/net/fsm.c
188
printk(KERN_DEBUG "fsm(%s): Restart timer %p %dms\n",
drivers/s390/net/fsm.c
28
printk(KERN_WARNING
drivers/s390/net/fsm.c
37
printk(KERN_WARNING
drivers/s390/net/fsm.c
50
printk(KERN_WARNING
drivers/s390/net/fsm.c
60
printk(KERN_ERR
drivers/s390/net/fsm.c
83
printk(KERN_WARNING
drivers/s390/net/fsm.c
97
printk(KERN_DEBUG "fsm(%s): History:\n", fi->name);
drivers/s390/net/fsm.h
151
printk(KERN_ERR "fsm(%s): Invalid state st(%ld/%ld) ev(%d/%ld)\n",
drivers/s390/net/fsm.h
162
printk(KERN_DEBUG "fsm(%s): state %s event %s\n",
drivers/s390/net/fsm.h
173
printk(KERN_DEBUG "fsm(%s): no function for event %s in state %s\n",
drivers/s390/net/fsm.h
199
printk(KERN_DEBUG "fsm(%s): New state %s\n", fi->name,
drivers/sbus/char/bbc_envctrl.c
107
printk("fan%d: Changed fan speed to cpu(%02x) sys(%02x)\n",
drivers/sbus/char/bbc_envctrl.c
131
printk("temp%d: cpu(%d C) amb(%d C)\n",
drivers/sbus/char/bbc_envctrl.c
157
printk(KERN_CRIT "temp%d: Outside of safe %s "
drivers/sbus/char/bbc_envctrl.c
161
printk(KERN_CRIT "kenvctrld: Shutting down the system now.\n");
drivers/sbus/char/bbc_envctrl.c
176
printk(KERN_WARNING "temp%d: "
drivers/sbus/char/bbc_envctrl.c
182
printk(KERN_WARNING "temp%d: "
drivers/sbus/char/bbc_envctrl.c
231
printk(KERN_WARNING "temp%d: "
drivers/sbus/char/bbc_envctrl.c
237
printk(KERN_WARNING "temp%d: "
drivers/sbus/char/bbc_envctrl.c
422
printk(KERN_INFO "bbc_envctrl: kenvctrld starting...\n");
drivers/sbus/char/bbc_envctrl.c
439
printk(KERN_INFO "bbc_envctrl: kenvctrld exiting...\n");
drivers/sbus/char/bbc_i2c.c
345
printk(KERN_INFO "i2c-%d: Regs at %p, %d devices, own %02x, clock %02x.\n",
drivers/sbus/char/display7seg.c
187
printk(KERN_ERR PFX "Cannot map chip registers\n");
drivers/sbus/char/display7seg.c
193
printk(KERN_ERR PFX "Unable to acquire miscdevice minor %i\n",
drivers/sbus/char/display7seg.c
213
printk(KERN_INFO PFX "7-Segment Display%pOF at [%s:0x%llx] %s\n",
drivers/sbus/char/envctrl.c
1010
printk(KERN_CRIT
drivers/sbus/char/envctrl.c
1020
printk(KERN_INFO PFX "%s exiting...\n", current->comm);
drivers/sbus/char/envctrl.c
1065
printk(KERN_ERR PFX "Unable to get misc minor %d\n",
drivers/sbus/char/envctrl.c
1074
printk(KERN_INFO PFX "Initialized ");
drivers/sbus/char/envctrl.c
1076
printk("[%s 0x%lx]%s",
drivers/sbus/char/envctrl.c
197
printk(KERN_INFO PFX "Pin status will not clear.\n");
drivers/sbus/char/envctrl.c
215
printk(KERN_INFO PFX "Busy bit will not clear.\n");
drivers/sbus/char/envctrl.c
883
printk(KERN_ERR PFX "Failed to allocate table.\n");
drivers/sbus/char/envctrl.c
888
printk(KERN_ERR PFX "Failed to get table.\n");
drivers/sbus/char/envctrl.c
977
printk(KERN_CRIT "kenvctrld: WARNING: Shutting down the system now.\n");
drivers/sbus/char/envctrl.c
991
printk(KERN_ERR PFX
drivers/sbus/char/envctrl.c
998
printk(KERN_INFO PFX "%s starting...\n", current->comm);
drivers/sbus/char/flash.c
182
printk(KERN_INFO "%pOF: OBP Flash, RD %lx[%lx] WR %lx[%lx]\n",
drivers/sbus/char/openprom.c
347
printk(KERN_INFO "openprom_sunos_ioctl: unimplemented ioctl\n");
drivers/sbus/char/openprom.c
352
printk(KERN_INFO "openprom_sunos_ioctl: cmd 0x%X, arg 0x%lX\n", cmd, arg);
drivers/sbus/char/uctrl.c
27
#define dprintk(x) printk x
drivers/sbus/char/uctrl.c
353
printk(KERN_ERR "uctrl: Unable to allocate device struct.\n");
drivers/sbus/char/uctrl.c
361
printk(KERN_ERR "uctrl: Unable to map registers.\n");
drivers/sbus/char/uctrl.c
368
printk(KERN_ERR "uctrl: Unable to register irq.\n");
drivers/sbus/char/uctrl.c
374
printk(KERN_ERR "uctrl: Unable to register misc device.\n");
drivers/sbus/char/uctrl.c
379
printk(KERN_INFO "%pOF: uctrl regs[0x%p] (irq %d)\n",
drivers/scsi/3w-9xxx.c
1006
printk(KERN_WARNING "3w-9xxx: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n",
drivers/scsi/3w-9xxx.c
1012
printk(KERN_WARNING "3w-9xxx: ERROR: (0x%02X:0x%04X): %s:%s.\n",
drivers/scsi/3w-9xxx.c
1938
printk(KERN_WARNING "3w-9xxx: Shutting down host %d.\n", tw_dev->host->host_no);
drivers/scsi/3w-9xxx.c
1944
printk(KERN_WARNING "3w-9xxx: Shutdown complete.\n");
drivers/scsi/3w-9xxx.c
2096
printk(KERN_WARNING "3w-9xxx: scsi%d: Found a 3ware 9000 Storage Controller at 0x%lx, IRQ: %d.\n",
drivers/scsi/3w-9xxx.c
2098
printk(KERN_WARNING "3w-9xxx: scsi%d: Firmware %s, BIOS %s, Ports: %d.\n",
drivers/scsi/3w-9xxx.c
2193
printk(KERN_WARNING "3w-9xxx: Suspending host %d.\n", tw_dev->host->host_no);
drivers/scsi/3w-9xxx.c
2205
printk(KERN_WARNING "3w-9xxx: Suspend complete.\n");
drivers/scsi/3w-9xxx.c
2220
printk(KERN_WARNING "3w-9xxx: Resuming host %d.\n", tw_dev->host->host_no);
drivers/scsi/3w-9xxx.c
2254
printk(KERN_WARNING "3w-9xxx: Resume complete.\n");
drivers/scsi/3w-9xxx.c
2292
printk(KERN_WARNING "3ware 9000 Storage Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION);
drivers/scsi/3w-9xxx.c
413
printk(KERN_WARNING "3w-9xxx:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n",
drivers/scsi/3w-9xxx.c
725
printk(KERN_WARNING "3w-9xxx: scsi%d: WARNING: (0x%02X:0x%04X): Character ioctl (0x%x) timed out, resetting card.\n",
drivers/scsi/3w-9xxx.h
477
printk(KERN_WARNING "3w-9xxx: scsi%d: ERROR: (0x%02X:0x%04X): %s.\n",h->host_no,a,b,c); \
drivers/scsi/3w-9xxx.h
479
printk(KERN_WARNING "3w-9xxx: ERROR: (0x%02X:0x%04X): %s.\n",a,b,c); \
drivers/scsi/3w-sas.c
1499
printk(KERN_WARNING "3w-sas: Shutting down host %d.\n", tw_dev->host->host_no);
drivers/scsi/3w-sas.c
1505
printk(KERN_WARNING "3w-sas: Shutdown complete.\n");
drivers/scsi/3w-sas.c
1637
printk(KERN_WARNING "3w-sas: scsi%d: Found an LSI 3ware %s Controller at 0x%llx, IRQ: %d.\n",
drivers/scsi/3w-sas.c
1648
printk(KERN_WARNING "3w-sas: scsi%d: Firmware %s, BIOS %s, Phys: %d.\n",
drivers/scsi/3w-sas.c
1759
printk(KERN_WARNING "3w-sas: Suspending host %d.\n", tw_dev->host->host_no);
drivers/scsi/3w-sas.c
1769
printk(KERN_WARNING "3w-sas: Suspend complete.\n");
drivers/scsi/3w-sas.c
1786
printk(KERN_WARNING "3w-sas: Resuming host %d.\n", tw_dev->host->host_no);
drivers/scsi/3w-sas.c
1817
printk(KERN_WARNING "3w-sas: Resume complete.\n");
drivers/scsi/3w-sas.c
1848
printk(KERN_INFO "LSI 3ware SAS/SATA-RAID Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION);
drivers/scsi/3w-sas.c
259
printk(KERN_WARNING "3w-sas:%s AEN: %s (0x%02X:0x%04X): %s:%s.\n",
drivers/scsi/3w-sas.c
794
printk(KERN_WARNING "3w-sas: scsi%d: WARNING: (0x%02X:0x%04X): Character ioctl (0x%x) timed out, resetting card.\n",
drivers/scsi/3w-sas.c
876
printk(KERN_WARNING "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s:%s.\n",
drivers/scsi/3w-sas.c
883
printk(KERN_WARNING "3w-sas: ERROR: (0x%02X:0x%04X): %s:%s.\n",
drivers/scsi/3w-sas.h
209
printk(KERN_WARNING "3w-sas: scsi%d: ERROR: (0x%02X:0x%04X): %s.\n",h->host_no,a,b,c); \
drivers/scsi/3w-sas.h
211
printk(KERN_WARNING "3w-sas: ERROR: (0x%02X:0x%04X): %s.\n",a,b,c); \
drivers/scsi/3w-xxxx.c
1091
printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet virtual address.\n");
drivers/scsi/3w-xxxx.c
1107
printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Bad command packet physical address.\n");
drivers/scsi/3w-xxxx.c
1121
printk(KERN_WARNING "3w-xxxx: tw_initconnection(): Unexpected request id.\n");
drivers/scsi/3w-xxxx.c
1146
printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet virtual address.\n");
drivers/scsi/3w-xxxx.c
1161
printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad alignment physical address.\n");
drivers/scsi/3w-xxxx.c
1176
printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Bad command packet physical address.\n");
drivers/scsi/3w-xxxx.c
1190
printk(KERN_WARNING "3w-xxxx: tw_setfeature(): Unexpected request id.\n");
drivers/scsi/3w-xxxx.c
1216
printk(KERN_WARNING "3w-xxxx: scsi%d: AEN drain failed, retrying.\n", tw_dev->host->host_no);
drivers/scsi/3w-xxxx.c
1223
printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors found, retrying.\n", tw_dev->host->host_no);
drivers/scsi/3w-xxxx.c
1233
printk(KERN_WARNING "3w-xxxx: scsi%d: Controller errors, card not responding, check all cabling.\n", tw_dev->host->host_no);
drivers/scsi/3w-xxxx.c
1239
printk(KERN_WARNING "3w-xxxx: scsi%d: Connection initialization failed.\n", tw_dev->host->host_no);
drivers/scsi/3w-xxxx.c
1245
printk(KERN_WARNING "3w-xxxx: Unable to set features for card, probable old firmware or card.\n");
drivers/scsi/3w-xxxx.c
1261
printk(KERN_WARNING "3w-xxxx: Command packet memory allocation failed.\n");
drivers/scsi/3w-xxxx.c
1268
printk(KERN_WARNING "3w-xxxx: Generic memory allocation failed.\n");
drivers/scsi/3w-xxxx.c
1331
printk(KERN_WARNING "3w-xxxx: scsi%d: Reset sequence failed.\n", tw_dev->host->host_no);
drivers/scsi/3w-xxxx.c
1387
printk(KERN_WARNING "3w-xxxx: scsi%d: Reset failed.\n", tw_dev->host->host_no);
drivers/scsi/3w-xxxx.c
1410
printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet virtual address.\n");
drivers/scsi/3w-xxxx.c
1423
printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment virtual address.\n");
drivers/scsi/3w-xxxx.c
1433
printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad alignment physical address.\n");
drivers/scsi/3w-xxxx.c
1441
printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry(): Bad command packet physical address.\n");
drivers/scsi/3w-xxxx.c
1479
printk(KERN_WARNING "3w-xxxx: tw_scsiop_inquiry_complete(): Bad alignment virtual address.\n");
drivers/scsi/3w-xxxx.c
1517
printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet virtual address.\n");
drivers/scsi/3w-xxxx.c
1532
printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment virtual address.\n");
drivers/scsi/3w-xxxx.c
1543
printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad alignment physical address.\n");
drivers/scsi/3w-xxxx.c
1551
printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense(): Bad command packet physical address.\n");
drivers/scsi/3w-xxxx.c
1572
printk(KERN_WARNING "3w-xxxx: tw_scsiop_mode_sense_complete(): Bad alignment virtual address.\n");
drivers/scsi/3w-xxxx.c
1664
printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_capacity_complete(): Bad alignment virtual address.\n");
drivers/scsi/3w-xxxx.c
1710
printk(KERN_WARNING "3w-xxxx: tw_scsiop_read_write(): Request buffer NULL.\n");
drivers/scsi/3w-xxxx.c
1817
printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet virtual address.\n");
drivers/scsi/3w-xxxx.c
1832
printk(KERN_WARNING "3w-xxxx: tw_scsiop_synchronize_cache(): Bad command packet physical address.\n");
drivers/scsi/3w-xxxx.c
1855
printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet virtual address.\n");
drivers/scsi/3w-xxxx.c
1868
printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment virtual address.\n");
drivers/scsi/3w-xxxx.c
1878
printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad alignment physical address.\n");
drivers/scsi/3w-xxxx.c
1886
printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready(): Bad command packet physical address.\n");
drivers/scsi/3w-xxxx.c
1906
printk(KERN_WARNING "3w-xxxx: tw_scsiop_test_unit_ready_complete(): Bad alignment virtual address.\n");
drivers/scsi/3w-xxxx.c
1974
printk(KERN_WARNING "3w-xxxx: SCSI_IOCTL_SEND_COMMAND deprecated, please update your 3ware tools.\n");
drivers/scsi/3w-xxxx.c
1977
printk(KERN_NOTICE "3w-xxxx: scsi%d: Unknown scsi opcode: 0x%x\n", tw_dev->host->host_no, *command);
drivers/scsi/3w-xxxx.c
2045
printk(KERN_WARNING "3w-xxxx: scsi%d: Error reading aen queue.\n", tw_dev->host->host_no);
drivers/scsi/3w-xxxx.c
2057
printk(KERN_WARNING "3w-xxxx: scsi%d: Found request id that wasn't pending.\n", tw_dev->host->host_no);
drivers/scsi/3w-xxxx.c
2100
printk(KERN_WARNING "3w-xxxx: scsi%d: Received a request id that wasn't posted.\n", tw_dev->host->host_no);
drivers/scsi/3w-xxxx.c
2114
printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing aen.\n", tw_dev->host->host_no);
drivers/scsi/3w-xxxx.c
2150
printk(KERN_WARNING "3w-xxxx: case slip in tw_interrupt()\n");
drivers/scsi/3w-xxxx.c
2201
printk(KERN_WARNING "3w-xxxx: Shutting down host %d.\n", tw_dev->host->host_no);
drivers/scsi/3w-xxxx.c
2205
printk(KERN_WARNING "3w-xxxx: Connection shutdown failed.\n");
drivers/scsi/3w-xxxx.c
2207
printk(KERN_WARNING "3w-xxxx: Shutdown complete.\n");
drivers/scsi/3w-xxxx.c
2259
printk(KERN_WARNING "3w-xxxx: Failed to enable pci device.");
drivers/scsi/3w-xxxx.c
2267
printk(KERN_WARNING "3w-xxxx: Failed to set dma mask.");
drivers/scsi/3w-xxxx.c
2273
printk(KERN_WARNING "3w-xxxx: Failed to allocate memory for device extension.");
drivers/scsi/3w-xxxx.c
2284
printk(KERN_WARNING "3w-xxxx: Failed to initialize device extension.");
drivers/scsi/3w-xxxx.c
2292
printk(KERN_WARNING "3w-xxxx: Failed to get mem region.");
drivers/scsi/3w-xxxx.c
2299
printk(KERN_WARNING "3w-xxxx: Failed to get io address.");
drivers/scsi/3w-xxxx.c
2324
printk(KERN_WARNING "3w-xxxx: scsi add host failed");
drivers/scsi/3w-xxxx.c
2330
printk(KERN_WARNING "3w-xxxx: scsi%d: Found a 3ware Storage Controller at 0x%x, IRQ: %d.\n", host->host_no, tw_dev->base_addr, pdev->irq);
drivers/scsi/3w-xxxx.c
2335
printk(KERN_WARNING "3w-xxxx: Error requesting IRQ.");
drivers/scsi/3w-xxxx.c
2350
printk(KERN_WARNING "3w-xxxx: Failed to register character device.");
drivers/scsi/3w-xxxx.c
2417
printk(KERN_WARNING "3ware Storage Controller device driver for Linux v%s.\n", TW_DRIVER_VERSION);
drivers/scsi/3w-xxxx.c
267
printk(KERN_WARNING "3w-xxxx:%s PCI Parity Error: clearing.\n", host);
drivers/scsi/3w-xxxx.c
272
printk(KERN_WARNING "3w-xxxx:%s PCI Abort: clearing.\n", host);
drivers/scsi/3w-xxxx.c
278
printk(KERN_WARNING "3w-xxxx:%s Controller Queue Error: clearing.\n", host);
drivers/scsi/3w-xxxx.c
283
printk(KERN_WARNING "3w-xxxx:%s SBUF Write Error: clearing.\n", host);
drivers/scsi/3w-xxxx.c
289
printk(KERN_WARNING "3w-xxxx:%s Microcontroller Error: clearing.\n", host);
drivers/scsi/3w-xxxx.c
409
printk(KERN_WARNING "3w-xxxx: scsi%d: Command failed: status = 0x%x, flags = 0x%x, unit #%d.\n", tw_dev->host->host_no, command->status, command->flags, TW_UNIT_OUT(command->unit__hostid));
drivers/scsi/3w-xxxx.c
560
printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet virtual address.\n");
drivers/scsi/3w-xxxx.c
573
printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad command packet physical address.\n");
drivers/scsi/3w-xxxx.c
578
printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment virtual address.\n");
drivers/scsi/3w-xxxx.c
588
printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Bad alignment physical address.\n");
drivers/scsi/3w-xxxx.c
601
printk(KERN_WARNING "3w-xxxx: tw_aen_read_queue(): Post failed, will retry.\n");
drivers/scsi/3w-xxxx.c
617
printk(KERN_WARNING "3w-xxxx: tw_aen_complete(): Bad alignment virtual address.\n");
drivers/scsi/3w-xxxx.c
626
printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: INFO: AEN queue overflow.\n", tw_dev->host->host_no);
drivers/scsi/3w-xxxx.c
631
printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s%d.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff], aen >> 8);
drivers/scsi/3w-xxxx.c
634
printk(KERN_WARNING "3w-xxxx: scsi%d: AEN: %s.\n", tw_dev->host->host_no, tw_aen_string[aen & 0xff]);
drivers/scsi/3w-xxxx.c
637
printk(KERN_WARNING "3w-xxxx: scsi%d: Received AEN %d.\n", tw_dev->host->host_no, aen);
drivers/scsi/3w-xxxx.c
660
printk(KERN_WARNING "3w-xxxx: scsi%d: Error completing AEN.\n", tw_dev->host->host_no);
drivers/scsi/3w-xxxx.c
701
printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet virtual address.\n");
drivers/scsi/3w-xxxx.c
714
printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad command packet physical address.\n");
drivers/scsi/3w-xxxx.c
720
printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment virtual address.\n");
drivers/scsi/3w-xxxx.c
730
printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Bad alignment physical address.\n");
drivers/scsi/3w-xxxx.c
748
printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Unexpected request id.\n");
drivers/scsi/3w-xxxx.c
780
printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]);
drivers/scsi/3w-xxxx.c
787
printk(KERN_WARNING "3w-xxxx: AEN: INFO: AEN queue overflow.\n");
drivers/scsi/3w-xxxx.c
792
printk(KERN_WARNING "3w-xxxx: AEN: %s%d.\n", tw_aen_string[aen & 0xff], aen >> 8);
drivers/scsi/3w-xxxx.c
794
printk(KERN_WARNING "3w-xxxx: AEN: %s.\n", tw_aen_string[aen & 0xff]);
drivers/scsi/3w-xxxx.c
797
printk(KERN_WARNING "3w-xxxx: Received AEN %d.\n", aen);
drivers/scsi/3w-xxxx.c
822
printk(KERN_WARNING "3w-xxxx: tw_aen_drain_queue(): Response never received.\n");
drivers/scsi/3w-xxxx.c
842
printk(KERN_WARNING "3w-xxxx: dma_alloc_coherent() failed.\n");
drivers/scsi/3w-xxxx.c
847
printk(KERN_WARNING "3w-xxxx: Couldn't allocate correctly aligned memory.\n");
drivers/scsi/3w-xxxx.c
866
printk(KERN_WARNING "3w-xxxx: tw_allocate_memory(): case slip in tw_allocate_memory()\n");
drivers/scsi/3w-xxxx.c
996
printk(KERN_WARNING "3w-xxxx: scsi%d: Character ioctl (0x%x) timed out, resetting card.\n", tw_dev->host->host_no, cmd);
drivers/scsi/3w-xxxx.c
999
printk(KERN_WARNING "3w-xxxx: tw_chrdev_ioctl(): Reset failed for card %d.\n", tw_dev->host->host_no);
drivers/scsi/3w-xxxx.h
284
#define dprintk(msg...) printk(msg)
drivers/scsi/53c700.c
1085
printk(KERN_ERR "scsi%d: (%d:%d) FATAL ERROR: %s\n",
drivers/scsi/53c700.c
1088
printk(KERN_ERR " msg begins %02x %02x\n",
drivers/scsi/53c700.c
1096
printk("scsi%d: (%d:%d), DISCONNECTED (%d) %s\n",
drivers/scsi/53c700.c
1116
printk(KERN_ERR "scsi%d: (%d:%d) HAS NO device\n",
drivers/scsi/53c700.c
1125
printk(KERN_ERR "scsi%d: (%d:%d) no saved request for tag %d\n",
drivers/scsi/53c700.c
1147
printk(KERN_ERR "scsi%d: (%d:%d) RESELECTED but no saved command (MSG = %02x %02x %02x)!!\n",
drivers/scsi/53c700.c
1153
printk(KERN_ERR "scsi%d: FATAL, host not busy during valid reselection!\n",
drivers/scsi/53c700.c
1203
printk(KERN_INFO "scsi%d: (%d:%d) RESELECTION DURING SELECTION, dsp=%08x[%04x] state=%d, count=%d\n",
drivers/scsi/53c700.c
1216
printk(KERN_INFO "IDENTIFIED SG segment as being %08x in slot %p, cmd %p, slot->resume_offset=%08x\n", SG, &hostdata->slots[i], hostdata->slots[i].cmnd, hostdata->slots[i].resume_offset);
drivers/scsi/53c700.c
1229
printk(KERN_ERR "scsi%d: Invalid reselection during selection!!\n", host->host_no);
drivers/scsi/53c700.c
1232
printk(KERN_ERR "scsi%d: script reselected and we took a selection interrupt\n",
drivers/scsi/53c700.c
1260
printk(KERN_ERR "scsi%d: (%d:%d), unhandled script condition %s %s at %04x\n",
drivers/scsi/53c700.c
1268
printk(KERN_INFO " SG[%d].length = %d, move_insn=%08x, addr %08x\n", i, sg->length, ((struct NCR_700_command_slot *)SCp->host_scribble)->SG[i].ins, ((struct NCR_700_command_slot *)SCp->host_scribble)->SG[i].pAddr);
drivers/scsi/53c700.c
1273
printk(KERN_NOTICE "scsi%d (%d:%d) DEBUG INTERRUPT %d AT %08x[%04x], continuing\n",
drivers/scsi/53c700.c
1277
printk(KERN_ERR "scsi%d: (%d:%d), unidentified script interrupt 0x%x at %04x\n",
drivers/scsi/53c700.c
1543
printk(KERN_ERR "scsi%d: Bus Reset detected, executing command %p, slot %p, dsp %08x[%04x]\n",
drivers/scsi/53c700.c
1562
printk(KERN_ERR " failing command because of reset, slot %p, cmnd %p\n",
drivers/scsi/53c700.c
1599
printk("scsi%d (%d:%d) PHASE MISMATCH IN SEND MESSAGE %d remain, return %p[%04x], phase %s\n", host->host_no, pun, lun, count, (void *)temp, temp - hostdata->pScript, sbcl_to_string(NCR_700_readb(host, SBCL_REG)));
drivers/scsi/53c700.c
1611
printk("scsi%d: (%d:%d) Expected phase mismatch in slot->SG[%d], transferred 0x%x\n",
drivers/scsi/53c700.c
1616
printk("scsi%d: (%d:%d) Expected phase mismatch in slot->SG[%d], transferred 0x%x, residual %d\n",
drivers/scsi/53c700.c
1637
printk("scsi%d (%d:%d) transfer mismatch pAddr=%lx, naddr=%lx, data_transfer=%d, residual=%d\n", host->host_no, pun, lun, (unsigned long)pAddr, (unsigned long)naddr, data_transfer, residual);
drivers/scsi/53c700.c
1655
printk(KERN_ERR "scsi%d: (%d:%d) phase mismatch at %04x, phase %s\n",
drivers/scsi/53c700.c
1661
printk(KERN_ERR "scsi%d: (%d:%d) GROSS ERROR\n",
drivers/scsi/53c700.c
1665
printk(KERN_ERR "scsi%d: (%d:%d) PARITY ERROR\n",
drivers/scsi/53c700.c
1673
printk(KERN_ERR "scsi%d: (%d:%d) Illegal Instruction detected at 0x%08x[0x%x]!!!\n"
drivers/scsi/53c700.c
1679
printk(KERN_ERR "scsi%d: (%d:%d) serious DMA problem, dstat=%02x\n",
drivers/scsi/53c700.c
1714
printk(KERN_ERR "scsi%d: Driver error: resume at 0x%08x [0x%04x] with non busy host!\n",
drivers/scsi/53c700.c
1764
printk(KERN_WARNING "scsi%d: Command depth has gone over queue depth\n", SCp->device->host->host_no);
drivers/scsi/53c700.c
1797
printk("53c700: scsi%d, command ", SCp->device->host->host_no);
drivers/scsi/53c700.c
1837
printk("53c700: Command");
drivers/scsi/53c700.c
1839
printk("Has wrong data direction %d\n", SCp->sc_data_direction);
drivers/scsi/53c700.c
1854
printk(KERN_ERR "53c700: Unknown command for data direction ");
drivers/scsi/53c700.c
246
printk(KERN_WARNING "53c700: Period %dns is less than this chip's minimum, setting to %d\n", period*4, NCR_700_MIN_PERIOD*4);
drivers/scsi/53c700.c
251
printk(KERN_WARNING "53c700: Offset %d exceeds chip maximum, setting to %d\n",
drivers/scsi/53c700.c
314
printk(KERN_ERR "53c700: Failed to allocate memory for driver, detaching\n");
drivers/scsi/53c700.c
394
printk(KERN_NOTICE "53c700: Version " NCR_700_VERSION " By James.Bottomley@HansenPartnership.com\n");
drivers/scsi/53c700.c
397
printk(KERN_NOTICE "scsi%d: %s rev %d %s\n", host->host_no,
drivers/scsi/53c700.c
489
printk("RESIDUAL IS %d (ddir %d)\n", count, ddir);
drivers/scsi/53c700.c
530
printk(KERN_ERR "SLOTS FULL, but count is %d, should be %d\n", hostdata->command_slot_count, NCR_700_COMMAND_SLOTS_PER_HOST);
drivers/scsi/53c700.c
536
printk(KERN_ERR "BUSY SLOT ON FREE LIST!!!\n");
drivers/scsi/53c700.c
559
printk(KERN_ERR "53c700: SLOT %p is not MAGIC!!!\n", slot);
drivers/scsi/53c700.c
562
printk(KERN_ERR "53c700: SLOT %p is FREE!!!\n", slot);
drivers/scsi/53c700.c
631
printk(KERN_ERR "Invalid depth in NCR_700_scsi_done(): %d\n",
drivers/scsi/53c700.c
640
printk(KERN_ERR "53c700: SCSI DONE HAS NULL SCp\n");
drivers/scsi/53c700.c
721
printk(KERN_ERR "53c700: Clock speed %dMHz is too high: 75Mhz is the maximum this chip can be driven at\n", hostdata->clock);
drivers/scsi/53c700.c
847
printk(KERN_INFO "scsi%d: (%d:%d), Unsolicited WDTR after CMD, Rejecting\n",
drivers/scsi/53c700.c
857
printk(KERN_INFO "scsi%d (%d:%d): Unexpected message %s: ",
drivers/scsi/53c700.c
861
printk("\n");
drivers/scsi/53c700.c
888
printk("scsi%d (%d:%d): message %s: ", host->host_no, pun, lun,
drivers/scsi/53c700.c
891
printk("\n");
drivers/scsi/53c700.c
929
printk(KERN_ERR "scsi%d (%d:%d) Parity Error!\n", host->host_no,
drivers/scsi/53c700.c
934
printk(KERN_INFO "scsi%d (%d:%d) SIMPLE TAG %d %s\n", host->host_no,
drivers/scsi/53c700.c
940
printk(KERN_INFO "scsi%d (%d:%d): Unexpected message %s: ",
drivers/scsi/53c700.c
945
printk("\n");
drivers/scsi/53c700.c
999
printk(" cmd %p has status %d, requesting sense\n",
drivers/scsi/53c700.h
24
#define DEBUG(x) printk x
drivers/scsi/BusLogic.c
2351
printk(KERN_WARNING
drivers/scsi/BusLogic.c
2366
printk(KERN_WARNING
drivers/scsi/BusLogic.c
3457
printk("%sscsi: %s", blogic_msglevelmap[msglevel], buf);
drivers/scsi/BusLogic.c
3463
printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf);
drivers/scsi/BusLogic.c
3469
printk("%sscsi%d: %s", blogic_msglevelmap[msglevel], adapter->host_no, buf);
drivers/scsi/BusLogic.c
3471
printk("%s%s", blogic_msglevelmap[msglevel], buf);
drivers/scsi/NCR5380.c
2103
printk("\n");
drivers/scsi/NCR5380.c
302
printk(KERN_DEBUG "SR = 0x%02x : ", status);
drivers/scsi/NCR5380.c
305
printk(KERN_CONT "%s, ", signals[i].name);
drivers/scsi/NCR5380.c
306
printk(KERN_CONT "\nBASR = 0x%02x : ", basr);
drivers/scsi/NCR5380.c
309
printk(KERN_CONT "%s, ", basrs[i].name);
drivers/scsi/NCR5380.c
310
printk(KERN_CONT "\nICR = 0x%02x : ", icr);
drivers/scsi/NCR5380.c
313
printk(KERN_CONT "%s, ", icrs[i].name);
drivers/scsi/NCR5380.c
314
printk(KERN_CONT "\nMR = 0x%02x : ", mr);
drivers/scsi/NCR5380.c
317
printk(KERN_CONT "%s, ", mrs[i].name);
drivers/scsi/NCR5380.c
318
printk(KERN_CONT "\n");
drivers/scsi/NCR5380.h
259
printk(KERN_DEBUG fmt, ## __VA_ARGS__); } while (0)
drivers/scsi/a100u2w.c
1031
printk(KERN_DEBUG "inia100: %x %x\n", scb->hastat, scb->tastat);
drivers/scsi/a100u2w.c
1092
printk(KERN_WARNING "Unable to set 32bit DMA "
drivers/scsi/a100u2w.c
1101
printk(KERN_WARNING "inia100: io port 0x%lx, is busy.\n", port);
drivers/scsi/a100u2w.c
1124
printk("inia100: SCB memory allocation error\n");
drivers/scsi/a100u2w.c
1133
printk("inia100: ESCB memory allocation error\n");
drivers/scsi/a100u2w.c
1138
printk("inia100: initial orchid fail!!\n");
drivers/scsi/a100u2w.c
1156
printk(KERN_WARNING "inia100: unable to get irq %d\n",
drivers/scsi/a100u2w.c
623
printk(KERN_ERR "Unable to Reset - No SCB Found\n");
drivers/scsi/a100u2w.c
891
printk("max cdb length= %x\n", cmd->cmd_len);
drivers/scsi/a100u2w.c
995
printk(KERN_ERR "inia100_scb_handler: SRB pointer is empty\n");
drivers/scsi/aacraid/aachba.c
1151
printk(KERN_WARNING "aac_get_container_serial: aac_fib_send failed with status: %d.\n", status);
drivers/scsi/aacraid/aachba.c
2143
printk(KERN_INFO "%s%d: kernel %d.%d-%d[%d] %.*s\n",
drivers/scsi/aacraid/aachba.c
2153
printk(KERN_INFO "%s%d: monitor %d.%d-%d[%d]\n",
drivers/scsi/aacraid/aachba.c
2158
printk(KERN_INFO "%s%d: bios %d.%d-%d[%d]\n",
drivers/scsi/aacraid/aachba.c
2165
printk(KERN_INFO "%s%d: serial %s",
drivers/scsi/aacraid/aachba.c
2168
printk(KERN_INFO "%s%d: TSID %.*s\n",
drivers/scsi/aacraid/aachba.c
2177
printk(KERN_INFO "%s%d: Reset Adapter Ignored\n",
drivers/scsi/aacraid/aachba.c
2207
printk(KERN_INFO "%s%d: ROMB RAID/SCSI mode enabled\n",
drivers/scsi/aacraid/aachba.c
2213
printk(KERN_INFO "%s%d: Non-DASD support enabled.\n",dev->name, dev->id);
drivers/scsi/aacraid/aachba.c
2221
printk(KERN_INFO "%s%d: 64bit support enabled.\n",
drivers/scsi/aacraid/aachba.c
2361
printk(KERN_DEBUG
drivers/scsi/aacraid/aachba.c
2394
printk(KERN_WARNING "io_callback: io failed, status = %d\n",
drivers/scsi/aacraid/aachba.c
2500
printk(KERN_WARNING "aac_read: aac_fib_send failed with status: %d.\n", status);
drivers/scsi/aacraid/aachba.c
2591
printk(KERN_WARNING "aac_write: aac_fib_send failed with status: %d\n", status);
drivers/scsi/aacraid/aachba.c
2623
printk(KERN_WARNING
drivers/scsi/aacraid/aachba.c
2684
printk(KERN_WARNING
drivers/scsi/aacraid/aachba.c
3739
printk(KERN_WARNING "aac_srb: aac_fib_send failed with status: %d\n", status);
drivers/scsi/aacraid/aachba.c
3824
printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
drivers/scsi/aacraid/aachba.c
383
printk(KERN_WARNING "aac_get_config_status: SendFIB failed.\n");
drivers/scsi/aacraid/aachba.c
3868
printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
drivers/scsi/aacraid/aachba.c
3916
printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
drivers/scsi/aacraid/aachba.c
395
printk(KERN_WARNING "aac_get_config_status: Will not issue the Commit Configuration\n");
drivers/scsi/aacraid/aachba.c
3997
printk(KERN_WARNING"aacraid: cmd len %08lX cmd underflow %08X\n",
drivers/scsi/aacraid/aachba.c
424
printk(KERN_WARNING
drivers/scsi/aacraid/aachba.c
514
printk(KERN_WARNING "aac_get_containers: SendFIB failed.\n");
drivers/scsi/aacraid/aachba.c
616
printk(KERN_WARNING "aac_get_container_name: aac_fib_send failed with status: %d.\n", status);
drivers/scsi/aacraid/comminit.c
584
printk(KERN_WARNING
drivers/scsi/aacraid/comminit.c
637
printk(KERN_ERR "Error could not allocate comm region.\n");
drivers/scsi/aacraid/comminit.c
89
printk(KERN_ERR "aacraid: unable to create mapping.\n");
drivers/scsi/aacraid/commsup.c
1012
printk(KERN_WARNING "%s:%s", dev->name, cp);
drivers/scsi/aacraid/commsup.c
1014
printk(KERN_INFO "%s:%s", dev->name, cp);
drivers/scsi/aacraid/commsup.c
2408
printk(KERN_ERR "%s%d: Failed to register IRQ for vector %d.\n",
drivers/scsi/aacraid/commsup.c
2426
printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
drivers/scsi/aacraid/commsup.c
289
printk(KERN_WARNING "aac_fib_free, XferState != 0, fibptr = 0x%p, XferState = 0x%x\n",
drivers/scsi/aacraid/commsup.c
388
printk(KERN_WARNING "Queue %d full, %u outstanding.\n",
drivers/scsi/aacraid/commsup.c
421
printk(KERN_ERR "GetEntries failed\n");
drivers/scsi/aacraid/commsup.c
579
printk(KERN_INFO "No management Fibs Available:%d\n",
drivers/scsi/aacraid/commsup.c
615
printk(KERN_ERR "aac_fib_send: returned -EBUSY\n");
drivers/scsi/aacraid/commsup.c
647
printk(KERN_ERR "aacraid: aac_fib_send: first asynchronous command timed out.\n"
drivers/scsi/aacraid/commsup.c
660
printk(KERN_ERR "aacraid: aac_fib_send: adapter blinkLED 0x%x.\n"
drivers/scsi/aacraid/commsup.c
921
printk(KERN_WARNING "aac_fib_adapter_complete: "
drivers/scsi/aacraid/linit.c
1689
printk(KERN_INFO "%s%d: Sync. mode enforced "
drivers/scsi/aacraid/linit.c
1695
printk(KERN_INFO "%s%d: Async. mode not supported "
drivers/scsi/aacraid/linit.c
1707
printk(KERN_ERR "aacraid: Unable to create command thread.\n");
drivers/scsi/aacraid/linit.c
1890
printk(KERN_INFO "%s%d: resume failed.\n", aac->name, aac->id);
drivers/scsi/aacraid/linit.c
2053
printk(KERN_INFO "Adaptec %s driver %s\n",
drivers/scsi/aacraid/rx.c
480
printk(KERN_ERR "%s%d: adapter kernel panic'd %x.\n",
drivers/scsi/aacraid/rx.c
553
printk(KERN_WARNING "%s: unable to map adapter.\n", name);
drivers/scsi/aacraid/rx.c
586
printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
drivers/scsi/aacraid/rx.c
593
printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
drivers/scsi/aacraid/rx.c
605
printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
drivers/scsi/aacraid/rx.c
653
printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
drivers/scsi/aacraid/sa.c
344
printk(KERN_WARNING "%s: unable to map adapter.\n", name);
drivers/scsi/aacraid/sa.c
352
printk(KERN_WARNING "%s%d: adapter self-test failed.\n", name, instance);
drivers/scsi/aacraid/sa.c
359
printk(KERN_WARNING "%s%d: adapter kernel panic'd.\n", name, instance);
drivers/scsi/aacraid/sa.c
369
printk(KERN_WARNING "%s%d: adapter kernel failed to start, init status = %lx.\n",
drivers/scsi/aacraid/sa.c
388
printk(KERN_WARNING "%s%d: Interrupt unavailable.\n",
drivers/scsi/aacraid/src.c
1002
printk(KERN_ERR "%s%d: Interrupt unavailable.\n",
drivers/scsi/aacraid/src.c
1188
printk(KERN_WARNING "%s: unable to map adapter.\n", name);
drivers/scsi/aacraid/src.c
1214
printk(KERN_ERR "%s%d: adapter flash update failed.\n",
drivers/scsi/aacraid/src.c
1241
printk(KERN_ERR "%s%d: adapter self-test failed.\n", dev->name, instance);
drivers/scsi/aacraid/src.c
1248
printk(KERN_ERR "%s%d: adapter monitor panic.\n", dev->name, instance);
drivers/scsi/aacraid/src.c
1264
printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
drivers/scsi/aacraid/src.c
896
printk(KERN_WARNING "%s: unable to map adapter.\n", name);
drivers/scsi/aacraid/src.c
925
printk(KERN_ERR "%s%d: adapter self-test failed.\n",
drivers/scsi/aacraid/src.c
933
printk(KERN_ERR "%s%d: adapter monitor panic.\n",
drivers/scsi/aacraid/src.c
946
printk(KERN_ERR "%s%d: adapter kernel failed to start, init status = %lx.\n",
drivers/scsi/advansys.c
11326
printk(KERN_WARNING "Region %x-%x busy\n", ioport,
drivers/scsi/advansys.c
2092
printk("advansys: "); \
drivers/scsi/advansys.c
2093
printk(s); \
drivers/scsi/advansys.c
2098
printk("advansys: "); \
drivers/scsi/advansys.c
2099
printk((s), (a1)); \
drivers/scsi/advansys.c
2104
printk("advansys: "); \
drivers/scsi/advansys.c
2105
printk((s), (a1), (a2)); \
drivers/scsi/advansys.c
2110
printk("advansys: "); \
drivers/scsi/advansys.c
2111
printk((s), (a1), (a2), (a3)); \
drivers/scsi/advansys.c
2116
printk("advansys: "); \
drivers/scsi/advansys.c
2117
printk((s), (a1), (a2), (a3), (a4)); \
drivers/scsi/advansys.c
2144
printk(KERN_DEBUG "%s: %s: " format, DRV_NAME, \
drivers/scsi/advansys.c
2296
printk("ASC_DVC_VAR at addr 0x%lx\n", (ulong)h);
drivers/scsi/advansys.c
2298
printk(" iop_base 0x%x, err_code 0x%x, dvc_cntl 0x%x, bug_fix_cntl "
drivers/scsi/advansys.c
2301
printk(" bus_type %d, init_sdtr 0x%x,\n", h->bus_type,
drivers/scsi/advansys.c
2304
printk(" sdtr_done 0x%x, use_tagged_qng 0x%x, unit_not_ready 0x%x, "
drivers/scsi/advansys.c
2309
printk(" queue_full_or_busy 0x%x, start_motor 0x%x, scsi_reset_wait "
drivers/scsi/advansys.c
2313
printk(" is_in_int %u, max_total_qng %u, cur_total_qng %u, "
drivers/scsi/advansys.c
2318
printk(" last_q_shortage %u, init_state 0x%x, no_scam 0x%x, "
drivers/scsi/advansys.c
2323
printk(" cfg 0x%lx\n", (ulong)h->cfg);
drivers/scsi/advansys.c
2331
printk("ASC_DVC_CFG at addr 0x%lx\n", (ulong)h);
drivers/scsi/advansys.c
2333
printk(" can_tagged_qng 0x%x, cmd_qng_enabled 0x%x,\n",
drivers/scsi/advansys.c
2335
printk(" disc_enable 0x%x, sdtr_enable 0x%x,\n",
drivers/scsi/advansys.c
2338
printk(" chip_scsi_id %d, chip_version %d,\n",
drivers/scsi/advansys.c
2341
printk(" mcode_date 0x%x, mcode_version %d\n",
drivers/scsi/advansys.c
2352
printk(" ADV_DVC_VAR at addr 0x%lx\n", (ulong)h);
drivers/scsi/advansys.c
2354
printk(" iop_base 0x%lx, err_code 0x%x, ultra_able 0x%x\n",
drivers/scsi/advansys.c
2357
printk(" sdtr_able 0x%x, wdtr_able 0x%x\n",
drivers/scsi/advansys.c
2360
printk(" start_motor 0x%x, scsi_reset_wait 0x%x\n",
drivers/scsi/advansys.c
2363
printk(" max_host_qng %u, max_dvc_qng %u, carr_freelist 0x%p\n",
drivers/scsi/advansys.c
2367
printk(" icq_sp 0x%p, irq_sp 0x%p\n", h->icq_sp, h->irq_sp);
drivers/scsi/advansys.c
2369
printk(" no_scam 0x%x, tagqng_able 0x%x\n",
drivers/scsi/advansys.c
2372
printk(" chip_scsi_id 0x%x, cfg 0x%lx\n",
drivers/scsi/advansys.c
2383
printk(" ADV_DVC_CFG at addr 0x%lx\n", (ulong)h);
drivers/scsi/advansys.c
2385
printk(" disc_enable 0x%x, termination 0x%x\n",
drivers/scsi/advansys.c
2388
printk(" chip_version 0x%x, mcode_date 0x%x\n",
drivers/scsi/advansys.c
2391
printk(" mcode_version 0x%x, control_flag 0x%x\n",
drivers/scsi/advansys.c
2402
printk("Scsi_Host at addr 0x%p, device %s\n", s, dev_name(boardp->dev));
drivers/scsi/advansys.c
2403
printk(" host_no %d,\n", s->host_no);
drivers/scsi/advansys.c
2405
printk(" base 0x%lx, io_port 0x%lx, irq %d,\n",
drivers/scsi/advansys.c
2408
printk(" dma_channel %d, this_id %d, can_queue %d,\n",
drivers/scsi/advansys.c
2411
printk(" cmd_per_lun %d, sg_tablesize %d\n",
drivers/scsi/advansys.c
2436
printk("%s: (%d bytes)\n", f, l);
drivers/scsi/advansys.c
2449
printk(" %2.2X%2.2X%2.2X%2.2X",
drivers/scsi/advansys.c
2461
printk(" %2.2X", (unsigned)s[i + (j * 4)]);
drivers/scsi/advansys.c
2464
printk(" %2.2X%2.2X",
drivers/scsi/advansys.c
2469
printk(" %2.2X%2.2X%2.2X",
drivers/scsi/advansys.c
2476
printk("\n");
drivers/scsi/advansys.c
2488
printk("ASC_SCSI_Q at addr 0x%lx\n", (ulong)q);
drivers/scsi/advansys.c
2490
printk
drivers/scsi/advansys.c
2495
printk
drivers/scsi/advansys.c
2501
printk(" cdbptr 0x%lx, cdb_len %u, sg_head 0x%lx, sg_queue_cnt %u\n",
drivers/scsi/advansys.c
2507
printk("ASC_SG_HEAD at addr 0x%lx\n", (ulong)sgp);
drivers/scsi/advansys.c
2508
printk(" entry_cnt %u, queue_cnt %u\n", sgp->entry_cnt,
drivers/scsi/advansys.c
2511
printk(" [%u]: addr 0x%lx, bytes %lu\n",
drivers/scsi/advansys.c
2524
printk("ASC_QDONE_INFO at addr 0x%lx\n", (ulong)q);
drivers/scsi/advansys.c
2525
printk(" srb_tag 0x%x, target_ix %u, cdb_len %u, tag_code %u,\n",
drivers/scsi/advansys.c
2528
printk
drivers/scsi/advansys.c
2542
printk(" ADV_SG_BLOCK at addr 0x%lx (sgblockno %d)\n",
drivers/scsi/advansys.c
2544
printk(" sg_cnt %u, sg_ptr 0x%x\n",
drivers/scsi/advansys.c
2550
printk(" [%u]: sg_addr 0x%x, sg_count 0x%x\n",
drivers/scsi/advansys.c
2567
printk("ADV_SCSI_REQ_Q at addr 0x%lx\n", (ulong)q);
drivers/scsi/advansys.c
2569
printk(" target_id %u, target_lun %u, srb_tag 0x%x\n",
drivers/scsi/advansys.c
2572
printk(" cntl 0x%x, data_addr 0x%lx\n",
drivers/scsi/advansys.c
2575
printk(" data_cnt %lu, sense_addr 0x%lx, sense_len %u,\n",
drivers/scsi/advansys.c
2579
printk
drivers/scsi/advansys.c
2583
printk(" sg_working_ix 0x%x, target_cmd %u\n",
drivers/scsi/advansys.c
2586
printk(" scsiq_rptr 0x%lx, sg_real_addr 0x%lx, sg_list_ptr 0x%lx\n",
drivers/scsi/advansys.c
4055
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
drivers/scsi/advansys.c
4061
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
drivers/scsi/advansys.c
4421
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
drivers/scsi/advansys.c
4427
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
drivers/scsi/advansys.c
4921
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
drivers/scsi/advansys.c
4927
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
drivers/scsi/advansys.c
5409
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
drivers/scsi/advansys.c
5415
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
drivers/scsi/aha152x.c
1014
printk(KERN_ERR "aha152x: reset_done w/o completion\n");
drivers/scsi/aha152x.c
1267
printk(KERN_NOTICE
drivers/scsi/aha152x.c
1274
printk(KERN_NOTICE
drivers/scsi/aha152x.c
1286
printk(KERN_NOTICE
drivers/scsi/aha152x.c
1314
printk(KERN_ERR "aha152x: done() called outside of command\n");
drivers/scsi/aha152x.c
1779
printk(INFO_LEAD, CMDINFO(CURRENT_SC));
drivers/scsi/aha152x.c
1781
printk("\n");
drivers/scsi/aha152x.c
2512
printk(KERN_DEBUG "\nqueue status:\nissue_SC:\n");
drivers/scsi/aha152x.c
2517
printk(KERN_DEBUG "current_SC:\n");
drivers/scsi/aha152x.c
2521
printk(KERN_DEBUG "none\n");
drivers/scsi/aha152x.c
2523
printk(KERN_DEBUG "disconnected_SC:\n");
drivers/scsi/aha152x.c
3070
printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup->io_port);
drivers/scsi/aha152x.c
3119
printk(KERN_INFO "aha152x: processing commandline: ");
drivers/scsi/aha152x.c
3123
printk(KERN_ERR "\naha152x: %s\n", setup[i].conf);
drivers/scsi/aha152x.c
3124
printk(KERN_ERR "aha152x: invalid line\n");
drivers/scsi/aha152x.c
3127
printk("ok\n");
drivers/scsi/aha152x.c
3136
printk(KERN_ERR "\naha152x: invalid override SETUP0={0x%x,%d,%d,%d,%d,%d,%d,%d}\n",
drivers/scsi/aha152x.c
3157
printk(KERN_ERR "\naha152x: invalid override SETUP1={0x%x,%d,%d,%d,%d,%d,%d,%d}\n",
drivers/scsi/aha152x.c
3199
printk(KERN_ERR "aha152x: invalid module params io=0x%x, irq=%d,scsiid=%d,reconnect=%d,parity=%d,sync=%d,delay=%d,exttrans=%d\n",
drivers/scsi/aha152x.c
3235
printk(KERN_ERR "aha152x: invalid module params io=0x%x, irq=%d,scsiid=%d,reconnect=%d,parity=%d,sync=%d,delay=%d,exttrans=%d\n",
drivers/scsi/aha152x.c
3280
printk (KERN_INFO
drivers/scsi/aha152x.c
3304
printk(KERN_INFO "aha152x: BIOS test: passed, ");
drivers/scsi/aha152x.c
3306
printk(KERN_INFO "aha152x: ");
drivers/scsi/aha152x.c
3315
printk(KERN_ERR "aha152x: io port 0x%x busy.\n", ports[i]);
drivers/scsi/aha152x.c
3350
printk("auto configuration: ok, ");
drivers/scsi/aha152x.c
3354
printk("%d controller(s) configured\n", setup_count);
drivers/scsi/aha152x.c
3369
printk(KERN_ERR "aha152x: io port 0x%x busy.\n", setup[i].io_port);
drivers/scsi/aha152x.c
3403
printk(KERN_ERR "aha152x: you can only configure up to two controllers\n");
drivers/scsi/aha152x.c
3417
printk(KERN_NOTICE "aha152x: usage: aha152x=<IOBASE>[,<IRQ>[,<SCSI ID>"
drivers/scsi/aha152x.c
739
printk(KERN_ERR "aha152x: scsi_host_alloc failed\n");
drivers/scsi/aha152x.c
775
printk("aha152x: resetting bus...\n");
drivers/scsi/aha152x.c
783
printk(KERN_INFO
drivers/scsi/aha152x.c
810
printk(KERN_ERR "aha152x%d: irq %d busy.\n", shpnt->host_no, shpnt->irq);
drivers/scsi/aha152x.c
816
printk(KERN_INFO "aha152x%d: trying software interrupt, ", shpnt->host_no);
drivers/scsi/aha152x.c
825
printk("lost.\n");
drivers/scsi/aha152x.c
827
printk("failed.\n");
drivers/scsi/aha152x.c
832
printk(KERN_ERR "aha152x%d: irq %d possibly wrong. "
drivers/scsi/aha152x.c
836
printk("ok.\n");
drivers/scsi/aha152x.c
844
printk(KERN_ERR "aha152x%d: failed to reassign irq %d.\n", shpnt->host_no, shpnt->irq);
drivers/scsi/aha152x.c
850
printk(KERN_ERR "aha152x%d: failed to add host.\n", shpnt->host_no);
drivers/scsi/aha1542.c
188
printk("Aha1542: %x %x\n", hosterr, scsierr);
drivers/scsi/aha1542.c
201
printk(KERN_ERR "aha1542: makecode: unknown hoststatus %x\n", hosterr);
drivers/scsi/aha1542.c
295
printk("no interrupt?");
drivers/scsi/aha1542.c
297
printk("MBIF ");
drivers/scsi/aha1542.c
299
printk("MBOF ");
drivers/scsi/aha1542.c
301
printk("HACC ");
drivers/scsi/aha1542.c
303
printk("SCRD ");
drivers/scsi/aha1542.c
304
printk("status %02x\n", inb(STATUS(sh->io_port)));
drivers/scsi/aha1542.c
321
printk("MBOF ");
drivers/scsi/aha1542.c
323
printk("HACC ");
drivers/scsi/aha1542.c
325
printk("SCRD ");
drivers/scsi/aha1542.c
403
printk("aha1542_intr_handle: returning %6x\n", errstatus);
drivers/scsi/aha1542.c
517
printk("aha1542_queuecommand: now waiting for interrupt ");
drivers/scsi/aha1740.c
145
printk("makecode from %x,%x,%x,%x %x,%x,%x,%x",
drivers/scsi/aha1740.c
187
printk("aha1740.c: WARNING: AHA1740 queue overflow!\n");
drivers/scsi/aha1740.c
207
printk("aha174x: Board detected, but not in enhanced mode, so disabled it.\n");
drivers/scsi/aha1740.c
235
DEB(printk("aha1740_intr top of loop.\n"));
drivers/scsi/aha1740.c
247
printk("Aha1740 null ecbptr in interrupt (%x,%x,%x,%d)\n",
drivers/scsi/aha1740.c
254
printk("Aha1740 null SCtmp in interrupt (%x,%x,%x,%d)\n",
drivers/scsi/aha1740.c
283
printk("aha1740_intr_handle: returning %6x\n",
drivers/scsi/aha1740.c
293
printk(KERN_ALERT "aha1740 hardware failure!\n");
drivers/scsi/aha1740.c
297
printk("aha1740 asynchronous event: %02x %02x %02x %02x %02x\n",
drivers/scsi/aha1740.c
348
printk("aha1740_queuecommand: dev %d cmd %02x pos %d len %d ",
drivers/scsi/aha1740.c
350
printk("scsi cmd:");
drivers/scsi/aha1740.c
351
for (i = 0; i < SCpnt->cmd_len; i++) printk("%02x ", cmd[i]);
drivers/scsi/aha1740.c
352
printk("\n");
drivers/scsi/aha1740.c
378
printk("Sending command (%d %x)...", ecbno, done);
drivers/scsi/aha1740.c
397
printk(KERN_WARNING "aha1740: out of memory in queuecommand!\n");
drivers/scsi/aha1740.c
421
printk("cptr %x: ",cptr);
drivers/scsi/aha1740.c
423
for(i=0;i<24;i++) printk("%02x ", ptr[i]);
drivers/scsi/aha1740.c
443
printk("aha1740_command: sending.. ");
drivers/scsi/aha1740.c
445
printk("%02x ", ((unchar *)&host->ecb[ecbno])[i]);
drivers/scsi/aha1740.c
447
printk("\n");
drivers/scsi/aha1740.c
466
DEB(printk("aha1740[%d] critical section\n",ecbno));
drivers/scsi/aha1740.c
472
printk("aha1740[%d]_mbxout wait!\n",ecbno);
drivers/scsi/aha1740.c
482
printk("aha1740[%d]_attn wait!\n",ecbno);
drivers/scsi/aha1740.c
489
DEB(printk("aha1740[%d] request queued.\n",ecbno));
drivers/scsi/aha1740.c
491
printk(KERN_ALERT "aha1740_queuecommand: done can't be NULL\n");
drivers/scsi/aha1740.c
519
DEB(printk("aha1740_biosparam\n"));
drivers/scsi/aha1740.c
567
DEB(printk("aha1740_probe: \n"));
drivers/scsi/aha1740.c
581
printk(KERN_INFO "Configuring slot %d at IO:%x, IRQ %u (%s)\n",
drivers/scsi/aha1740.c
583
printk(KERN_INFO "aha174x: Extended translation %sabled.\n",
drivers/scsi/aha1740.c
602
printk (KERN_ERR "aha1740_probe: Couldn't map ECB, giving up\n");
drivers/scsi/aha1740.c
606
DEB(printk("aha1740_probe: enable interrupt channel %d\n",irq_level));
drivers/scsi/aha1740.c
609
printk(KERN_ERR "aha1740_probe: Unable to allocate IRQ %d.\n",
drivers/scsi/aic7xxx/aic7770.c
152
printk("aic7770_config: invalid irq setting %d\n", intdef);
drivers/scsi/aic7xxx/aic7770.c
275
printk("%s: Reading SEEPROM...", ahc_name(ahc));
drivers/scsi/aic7xxx/aic7770.c
283
printk ("checksum error\n");
drivers/scsi/aic7xxx/aic7770.c
286
printk("done.\n");
drivers/scsi/aic7xxx/aic7770.c
292
printk("%s: No SEEPROM available\n", ahc_name(ahc));
drivers/scsi/aic7xxx/aic79xx_core.c
10284
printk("Configuring Target Mode\n");
drivers/scsi/aic7xxx/aic79xx_core.c
10313
printk("Lun already enabled\n");
drivers/scsi/aic7xxx/aic79xx_core.c
10325
printk("Non-zero Group Codes\n");
drivers/scsi/aic7xxx/aic79xx_core.c
10337
printk("Couldn't allocate tstate\n");
drivers/scsi/aic7xxx/aic79xx_core.c
10345
printk("Couldn't allocate lstate\n");
drivers/scsi/aic7xxx/aic79xx_core.c
10356
printk("Couldn't allocate path\n");
drivers/scsi/aic7xxx/aic79xx_core.c
10424
printk("Lun now enabled for target mode\n");
drivers/scsi/aic7xxx/aic79xx_core.c
10443
printk("CTIO pending\n");
drivers/scsi/aic7xxx/aic79xx_core.c
10451
printk("ATIOs pending\n");
drivers/scsi/aic7xxx/aic79xx_core.c
10456
printk("INOTs pending\n");
drivers/scsi/aic7xxx/aic79xx_core.c
10466
printk("Target mode disabled\n");
drivers/scsi/aic7xxx/aic79xx_core.c
10515
printk("Configuring Initiator Mode\n");
drivers/scsi/aic7xxx/aic79xx_core.c
10649
printk("Incoming command from %d for %d:%d%s\n",
drivers/scsi/aic7xxx/aic79xx_core.c
10696
printk("Reserved or VU command code type encountered\n");
drivers/scsi/aic7xxx/aic79xx_core.c
10713
printk("Received Immediate Command %d:%d:%d - %p\n",
drivers/scsi/aic7xxx/aic79xx_core.c
1169
printk("%s: Clearing FIFO %d\n", ahd_name(ahd), fifo);
drivers/scsi/aic7xxx/aic79xx_core.c
1210
printk("%s: Warning - GSFIFO SCB %d invalid\n",
drivers/scsi/aic7xxx/aic79xx_core.c
1334
printk("%s: Warning - DMA-up and complete "
drivers/scsi/aic7xxx/aic79xx_core.c
1355
printk("%s: Warning - Complete Qfrz SCB %d invalid\n",
drivers/scsi/aic7xxx/aic79xx_core.c
1372
printk("%s: Warning - Complete SCB %d invalid\n",
drivers/scsi/aic7xxx/aic79xx_core.c
1677
printk("%s: WARNING no command for scb %d "
drivers/scsi/aic7xxx/aic79xx_core.c
1709
printk("%s: hwerrint, %s\n",
drivers/scsi/aic7xxx/aic79xx_core.c
1740
printk("sg[%d] - Addr 0x%x%x : Length %d%s\n",
drivers/scsi/aic7xxx/aic79xx_core.c
1756
printk("sg[%d] - Addr 0x%x%x : Length %d%s\n",
drivers/scsi/aic7xxx/aic79xx_core.c
1795
printk("%s: Handle Seqint Called for code %d\n",
drivers/scsi/aic7xxx/aic79xx_core.c
1829
printk("%s: Assuming LQIPHASE_NLQ with "
drivers/scsi/aic7xxx/aic79xx_core.c
1835
printk("%s: Entering NONPACK\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_core.c
1840
printk("%s: Invalid Sequencer interrupt occurred, "
drivers/scsi/aic7xxx/aic79xx_core.c
1859
printk("%s: ", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_core.c
1860
printk("SCB %d Packetized Status Overrun", scbid);
drivers/scsi/aic7xxx/aic79xx_core.c
1874
printk("CFG4ISTAT: Free SCB %d referenced", scbid);
drivers/scsi/aic7xxx/aic79xx_core.c
1889
printk("%s: ILLEGAL_PHASE 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
1901
printk("%s: Issued Bus Reset.\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_core.c
1923
printk("Invalid phase with no valid SCB. "
drivers/scsi/aic7xxx/aic79xx_core.c
1981
printk("Unexpected command phase from "
drivers/scsi/aic7xxx/aic79xx_core.c
1997
printk("%s: CFG4OVERRUN mode = %x\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_core.c
2033
printk("%s: PDATA_REINIT - DFCNTRL = 0x%x "
drivers/scsi/aic7xxx/aic79xx_core.c
2066
printk("ahd_intr: HOST_MSG_LOOP bad "
drivers/scsi/aic7xxx/aic79xx_core.c
2114
printk("%s:%c:%d: no active SCB for reconnecting "
drivers/scsi/aic7xxx/aic79xx_core.c
2117
printk("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
drivers/scsi/aic7xxx/aic79xx_core.c
2121
printk("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, "
drivers/scsi/aic7xxx/aic79xx_core.c
2128
printk("SELID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
drivers/scsi/aic7xxx/aic79xx_core.c
2133
printk("SCSIBUS[0] == 0x%x, SCSISIGI == 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
2135
printk("SXFRCTL0 == 0x%x\n", ahd_inb(ahd, SXFRCTL0));
drivers/scsi/aic7xxx/aic79xx_core.c
2136
printk("SEQCTL0 == 0x%x\n", ahd_inb(ahd, SEQCTL0));
drivers/scsi/aic7xxx/aic79xx_core.c
2164
printk("%s:%c:%d: unknown scsi bus phase %x, "
drivers/scsi/aic7xxx/aic79xx_core.c
2176
printk("%s:%c:%d: Missed busfree. "
drivers/scsi/aic7xxx/aic79xx_core.c
2206
printk("data overrun detected %s. Tag == 0x%x.\n",
drivers/scsi/aic7xxx/aic79xx_core.c
2210
printk("%s seen Data Phase. Length = %ld. "
drivers/scsi/aic7xxx/aic79xx_core.c
2235
printk("%s:%c:%d:%d: Attempt to issue message failed\n",
drivers/scsi/aic7xxx/aic79xx_core.c
2268
printk("Task Management Func 0x%x Complete\n",
drivers/scsi/aic7xxx/aic79xx_core.c
2326
printk("SCB completes before TMF\n");
drivers/scsi/aic7xxx/aic79xx_core.c
2351
printk("%s: Tracepoint %d\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_core.c
2360
printk("%s: Unexpected SEQINTCODE %d\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_core.c
2425
printk("%s: Transceiver State Has Changed to %s mode\n",
drivers/scsi/aic7xxx/aic79xx_core.c
2437
printk("%s: SCSI offset overrun detected. Resetting bus.\n",
drivers/scsi/aic7xxx/aic79xx_core.c
2442
printk("%s: Someone reset channel A\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_core.c
2452
printk("%s: lqostat0 == 0x%x!\n", ahd_name(ahd), lqostat0);
drivers/scsi/aic7xxx/aic79xx_core.c
2482
printk("%s: ahd_intr - referenced scb not "
drivers/scsi/aic7xxx/aic79xx_core.c
2491
printk("Saw Selection Timeout for SCB 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
2519
printk("%s: SCSI Cell parity error SSTAT3 == 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
2572
printk("%s: Invalid SCB %d in DFF%d "
drivers/scsi/aic7xxx/aic79xx_core.c
2605
printk("Saw Busfree. Busfreetime = 0x%x.\n",
drivers/scsi/aic7xxx/aic79xx_core.c
2646
printk("%s: Missing case in ahd_handle_scsiint. status = %x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
2681
printk("%s: NLQCRC found via LQISTATE\n",
drivers/scsi/aic7xxx/aic79xx_core.c
2713
printk("%s: Transmission error detected\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_core.c
2718
printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c
2724
printk("%s: Gross protocol error during incoming "
drivers/scsi/aic7xxx/aic79xx_core.c
2753
printk("LQIRetry for LQICRCI_LQ to release ACK\n");
drivers/scsi/aic7xxx/aic79xx_core.c
2801
printk("LQICRC_NLQ\n");
drivers/scsi/aic7xxx/aic79xx_core.c
2803
printk("%s: No SCB valid for LQICRC_NLQ. "
drivers/scsi/aic7xxx/aic79xx_core.c
2809
printk("Need to handle BADLQI!\n");
drivers/scsi/aic7xxx/aic79xx_core.c
2816
printk("Acking %s to clear perror\n",
drivers/scsi/aic7xxx/aic79xx_core.c
284
printk("%s: Setting mode 0x%x\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_core.c
2861
printk("LQIRETRY for LQIPHASE_LQ\n");
drivers/scsi/aic7xxx/aic79xx_core.c
2864
printk("LQIRETRY for LQIPHASE_NLQ\n");
drivers/scsi/aic7xxx/aic79xx_core.c
2872
printk("Resetting Channel for LQI Phase error\n");
drivers/scsi/aic7xxx/aic79xx_core.c
2960
printk("Probable outgoing LQ CRC error. "
drivers/scsi/aic7xxx/aic79xx_core.c
2982
printk("%s: Parity on last REQ detected "
drivers/scsi/aic7xxx/aic79xx_core.c
2996
printk("Unexpected PKT busfree condition\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3005
printk("%s: Unexpected PKT busfree condition\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_core.c
302
printk("Reading mode 0x%x\n", mode_ptr);
drivers/scsi/aic7xxx/aic79xx_core.c
3060
printk("Abort for unidentified "
drivers/scsi/aic7xxx/aic79xx_core.c
3067
printk("SCB %d - Abort%s Completed.\n",
drivers/scsi/aic7xxx/aic79xx_core.c
3093
printk("found == 0x%x\n", found);
drivers/scsi/aic7xxx/aic79xx_core.c
3118
printk("PPR negotiation rejected busfree.\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3162
printk("WDTR negotiation rejected busfree.\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3187
printk("SDTR negotiation rejected busfree.\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3211
printk("Expected IDE Busfree\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3220
printk("Expected QAS Reject Busfree\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3246
printk("PPR Negotiation Busfree.\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3273
printk("%s: ", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_core.c
3275
printk("Unexpected busfree %s, %d SCBs aborted, "
drivers/scsi/aic7xxx/aic79xx_core.c
3313
printk("Target did not send an IDENTIFY message. "
drivers/scsi/aic7xxx/aic79xx_core.c
3322
printk("No SCB found during protocol violation\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3328
printk("No or incomplete CDB sent to device.\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3339
printk("Completed command without status.\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3342
printk("Unknown protocol violation.\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3356
printk("%s: Issued Channel %c Bus Reset. "
drivers/scsi/aic7xxx/aic79xx_core.c
3378
printk("Protocol violation %s. Attempting to abort.\n",
drivers/scsi/aic7xxx/aic79xx_core.c
3396
printk("Forcing renegotiation\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3456
printk("%s: Infinite loop in critical section\n"
drivers/scsi/aic7xxx/aic79xx_core.c
3467
printk("%s: Single stepping at 0x%x\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_core.c
3571
printk("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n",
drivers/scsi/aic7xxx/aic79xx_core.c
3577
printk("Shared Data: ");
drivers/scsi/aic7xxx/aic79xx_core.c
3579
printk("%#02x", hscb->shared_data.idata.cdb[i]);
drivers/scsi/aic7xxx/aic79xx_core.c
3580
printk(" dataptr:%#x%x datacnt:%#x sgptr:%#x tag:%#x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
3911
printk("%s: target %d synchronous with "
drivers/scsi/aic7xxx/aic79xx_core.c
3917
printk("(RDSTRM");
drivers/scsi/aic7xxx/aic79xx_core.c
3921
printk("%s", options ? "|DT" : "(DT");
drivers/scsi/aic7xxx/aic79xx_core.c
3925
printk("%s", options ? "|IU" : "(IU");
drivers/scsi/aic7xxx/aic79xx_core.c
3929
printk("%s", options ? "|RTI" : "(RTI");
drivers/scsi/aic7xxx/aic79xx_core.c
3933
printk("%s", options ? "|QAS" : "(QAS");
drivers/scsi/aic7xxx/aic79xx_core.c
3937
printk(")\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3939
printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3941
printk("%s: target %d using "
drivers/scsi/aic7xxx/aic79xx_core.c
3969
printk("Expecting IU Change busfree\n");
drivers/scsi/aic7xxx/aic79xx_core.c
3978
printk("PPR with IU_REQ outstanding\n");
drivers/scsi/aic7xxx/aic79xx_core.c
4030
printk("%s: target %d using %dbit transfers\n",
drivers/scsi/aic7xxx/aic79xx_core.c
4304
printk("%s:%c:%d:%d: ", ahd_name(ahd), 'A',
drivers/scsi/aic7xxx/aic79xx_core.c
4386
printk("Setting up for Parity Error delivery\n");
drivers/scsi/aic7xxx/aic79xx_core.c
4390
printk("%s: WARNING. No pending message for "
drivers/scsi/aic7xxx/aic79xx_core.c
4421
printk("Bus Device Reset Message Sent\n");
drivers/scsi/aic7xxx/aic79xx_core.c
4439
printk("Abort%s Message Sent\n",
drivers/scsi/aic7xxx/aic79xx_core.c
4460
printk("ahd_intr: AWAITING_MSG for an SCB that "
drivers/scsi/aic7xxx/aic79xx_core.c
4462
printk("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid,
drivers/scsi/aic7xxx/aic79xx_core.c
4544
printk("Ensuring async\n");
drivers/scsi/aic7xxx/aic79xx_core.c
4591
printk("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
4609
printk("(%s:%c:%d:%d): Sending WDTR %x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
4638
printk("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, "
drivers/scsi/aic7xxx/aic79xx_core.c
4688
printk("LQIRETRY for LQIPHASE_OUTPKT\n");
drivers/scsi/aic7xxx/aic79xx_core.c
4705
printk("INITIATOR_MSG_OUT");
drivers/scsi/aic7xxx/aic79xx_core.c
4712
printk(" PHASEMIS %s\n",
drivers/scsi/aic7xxx/aic79xx_core.c
4739
printk(" byte 0x%x\n", ahd->send_msg_perror);
drivers/scsi/aic7xxx/aic79xx_core.c
4780
printk(" byte 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
4795
printk("INITIATOR_MSG_IN");
drivers/scsi/aic7xxx/aic79xx_core.c
4802
printk(" PHASEMIS %s\n",
drivers/scsi/aic7xxx/aic79xx_core.c
4823
printk(" byte 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
4845
printk("Asserting ATN for response\n");
drivers/scsi/aic7xxx/aic79xx_core.c
4993
printk("%s: Returning to Idle Loop\n",
drivers/scsi/aic7xxx/aic79xx_core.c
5145
printk("(%s:%c:%d:%d): Received "
drivers/scsi/aic7xxx/aic79xx_core.c
5175
printk("(%s:%c:%d:%d): Target "
drivers/scsi/aic7xxx/aic79xx_core.c
5217
printk("(%s:%c:%d:%d): Received WDTR "
drivers/scsi/aic7xxx/aic79xx_core.c
5233
printk("(%s:%c:%d:%d): requested %dBit "
drivers/scsi/aic7xxx/aic79xx_core.c
5246
printk("(%s:%c:%d:%d): Target "
drivers/scsi/aic7xxx/aic79xx_core.c
5358
printk("(%s:%c:%d:%d): Target "
drivers/scsi/aic7xxx/aic79xx_core.c
5363
printk("(%s:%c:%d:%d): Initiator "
drivers/scsi/aic7xxx/aic79xx_core.c
5375
printk("(%s:%c:%d:%d): Received PPR width %x, "
drivers/scsi/aic7xxx/aic79xx_core.c
5451
printk("%s: QAS request. SCSISIGI == 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
5516
printk("(%s:%c:%d:%d): PPR Rejected. "
drivers/scsi/aic7xxx/aic79xx_core.c
5531
printk("(%s:%c:%d:%d): PPR Rejected. "
drivers/scsi/aic7xxx/aic79xx_core.c
5548
printk("(%s:%c:%d:%d): refuses WIDE negotiation. Using "
drivers/scsi/aic7xxx/aic79xx_core.c
5576
printk("(%s:%c:%d:%d): refuses synchronous negotiation. "
drivers/scsi/aic7xxx/aic79xx_core.c
5587
printk("(%s:%c:%d:%d): refuses tagged commands. "
drivers/scsi/aic7xxx/aic79xx_core.c
5593
printk("(%s:%c:%d:%d): refuses %s tagged commands. "
drivers/scsi/aic7xxx/aic79xx_core.c
5644
printk("%s:%c:%d: Message reject for %x -- ignored\n",
drivers/scsi/aic7xxx/aic79xx_core.c
5831
printk("ahd_reinitialize_dataptrs: Forcing FIFO free.\n");
drivers/scsi/aic7xxx/aic79xx_core.c
5945
printk("%s: %s on %c:%d. %d SCBs aborted\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_core.c
6042
printk("aic7xxx: cannot malloc softc!\n");
drivers/scsi/aic7xxx/aic79xx_core.c
6075
printk("%s: scb size = 0x%x, hscb size = 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
6247
printk("%s: WARNING - Failed chip reset! "
drivers/scsi/aic7xxx/aic79xx_core.c
6369
printk("%s: No SCB space found\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_core.c
6412
printk("%s: ahd_sglist_allocsize = 0x%x\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_core.c
6436
printk("%s: ahd_init_scbdata - "
drivers/scsi/aic7xxx/aic79xx_core.c
6571
printk("%s: Setting up iocell workaround\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_core.c
6591
printk("%s: iocell first selection\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_core.c
6598
printk("%s: BYPASS now disabled\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_core.c
6838
printk("Mapped SG data\n");
drivers/scsi/aic7xxx/aic79xx_core.c
6874
printk("Mapped sense data\n");
drivers/scsi/aic7xxx/aic79xx_core.c
7130
printk("%s: current sensing timeout 1\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_core.c
7137
printk("%s: current sensing timeout 2\n",
drivers/scsi/aic7xxx/aic79xx_core.c
7143
printk("%s: Timedout during current-sensing test\n",
drivers/scsi/aic7xxx/aic79xx_core.c
7151
printk("%s: current sensing timeout 3\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_core.c
7160
printk("%s: current_sensing == 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
7178
printk("%s: %s Channel %s\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_core.c
7184
printk("%s: WARNING. Termination is not configured correctly.\n"
drivers/scsi/aic7xxx/aic79xx_core.c
7299
printk("%s: WRTBIASCTL now 0x%x\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_core.c
7528
printk("aic79xx: failed to set the SLOWCRC bit\n");
drivers/scsi/aic7xxx/aic79xx_core.c
7530
printk("aic79xx: SLOWCRC bit set\n");
drivers/scsi/aic7xxx/aic79xx_core.c
7552
printk("%s: unable to allocate ahd_tmode_tstate. "
drivers/scsi/aic7xxx/aic79xx_core.c
7631
printk("%s: unable to allocate ahd_tmode_tstate. "
drivers/scsi/aic7xxx/aic79xx_core.c
7701
printk("(%d): %x:%x:%x:%x\n", targ, user_tinfo->width,
drivers/scsi/aic7xxx/aic79xx_core.c
7857
printk("Infinite interrupt loop, INTSTAT = %x",
drivers/scsi/aic7xxx/aic79xx_core.c
8143
printk("qinstart = %d qinfifonext = %d\nQINFIFO:",
drivers/scsi/aic7xxx/aic79xx_core.c
8158
printk("qinpos = %d, SCB index = %d\n",
drivers/scsi/aic7xxx/aic79xx_core.c
8171
printk("Inactive SCB in qinfifo\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8177
printk(" 0x%x", ahd->qinfifo[qinpos]);
drivers/scsi/aic7xxx/aic79xx_core.c
8194
printk("\nWAITING_TID_QUEUES:\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8222
printk("%s: Waiting TID List inconsistency. "
drivers/scsi/aic7xxx/aic79xx_core.c
8230
printk("%s: SCB = 0x%x Not Active!\n",
drivers/scsi/aic7xxx/aic79xx_core.c
8246
printk(" %d ( ", SCB_GET_TARGET(ahd, scb));
drivers/scsi/aic7xxx/aic79xx_core.c
8267
printk("Inactive SCB pending MK_MSG\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8274
printk("Removing MK_MSG scb\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8292
printk(" 0x%x", SCB_GET_TAG(scb));
drivers/scsi/aic7xxx/aic79xx_core.c
8309
printk("Queueing mk_msg_scb\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8320
printk(")\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8348
printk("%s:SCB List inconsistency. "
drivers/scsi/aic7xxx/aic79xx_core.c
8356
printk("%s: SCB = %d Not Active!\n",
drivers/scsi/aic7xxx/aic79xx_core.c
8372
printk("Inactive SCB in Waiting List\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8382
printk("0x%x ", scbid);
drivers/scsi/aic7xxx/aic79xx_core.c
8571
printk("Inactive SCB on pending list\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8628
printk("%s: bus reset still active\n",
drivers/scsi/aic7xxx/aic79xx_core.c
872
printk("%s: Queueing SCB %d:0x%x bus addr 0x%x - 0x%x%x/0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
8803
printk("%s: Interrupt coalescing "
drivers/scsi/aic7xxx/aic79xx_core.c
8877
printk("SCB 0x%x Received PKT Status of 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
8879
printk("\tflags = 0x%x, sense len = 0x%x, "
drivers/scsi/aic7xxx/aic79xx_core.c
8888
printk("Unable to parse pkt_failures\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8893
printk("No packet failure found\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8896
printk("Invalid Command IU Field\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8899
printk("TMF not supported\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8902
printk("TMF failed\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8905
printk("Invalid L_Q Type code\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8908
printk("Illegal request\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8922
printk("Sense data available\n");
drivers/scsi/aic7xxx/aic79xx_core.c
8940
printk("SCB %d: requests Check Status\n",
drivers/scsi/aic7xxx/aic79xx_core.c
8968
printk("Sending Sense\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9020
printk("%s: Interrupted for status of 0???\n",
drivers/scsi/aic7xxx/aic79xx_core.c
9095
printk("data overrun detected Tag == 0x%x.\n",
drivers/scsi/aic7xxx/aic79xx_core.c
9135
printk("Handled %sResidual of %d bytes\n",
drivers/scsi/aic7xxx/aic79xx_core.c
9175
printk("immediate event %x:%x lost\n",
drivers/scsi/aic7xxx/aic79xx_core.c
9247
printk("0x%08x\n", ins_bytes[0] << 24
drivers/scsi/aic7xxx/aic79xx_core.c
9275
printk("%s: Downloading Sequencer Program...",
drivers/scsi/aic7xxx/aic79xx_core.c
9408
printk(" %d instructions downloaded\n", downloaded);
drivers/scsi/aic7xxx/aic79xx_core.c
9409
printk("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
9592
printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9595
printed = printk("%s[0x%x]", name, value);
drivers/scsi/aic7xxx/aic79xx_core.c
9597
printed += printk(" ");
drivers/scsi/aic7xxx/aic79xx_core.c
9612
printed += printk("%s%s",
drivers/scsi/aic7xxx/aic79xx_core.c
9623
printed += printk(") ");
drivers/scsi/aic7xxx/aic79xx_core.c
9625
printed += printk(" ");
drivers/scsi/aic7xxx/aic79xx_core.c
9651
printk(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n"
drivers/scsi/aic7xxx/aic79xx_core.c
9658
printk("Card was paused\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9661
printk("Completions are pending\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9703
printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9704
printk("\nSCB Count = %d CMDS_PENDING = %d LASTSCB 0x%x "
drivers/scsi/aic7xxx/aic79xx_core.c
9715
printk("Pending list:");
drivers/scsi/aic7xxx/aic79xx_core.c
9720
cur_col = printk("\n%3d FIFO_USE[0x%x] ", SCB_GET_TAG(scb),
drivers/scsi/aic7xxx/aic79xx_core.c
9728
printk("\nTotal %d\n", i);
drivers/scsi/aic7xxx/aic79xx_core.c
9730
printk("Kernel Free SCB list: ");
drivers/scsi/aic7xxx/aic79xx_core.c
9737
printk("%d ", SCB_GET_TAG(list_scb));
drivers/scsi/aic7xxx/aic79xx_core.c
9745
printk("%d ", SCB_GET_TAG(scb));
drivers/scsi/aic7xxx/aic79xx_core.c
9747
printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9749
printk("Sequencer Complete DMA-inprog list: ");
drivers/scsi/aic7xxx/aic79xx_core.c
9754
printk("%d ", scb_index);
drivers/scsi/aic7xxx/aic79xx_core.c
9757
printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9759
printk("Sequencer Complete list: ");
drivers/scsi/aic7xxx/aic79xx_core.c
9764
printk("%d ", scb_index);
drivers/scsi/aic7xxx/aic79xx_core.c
9767
printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9769
printk("Sequencer DMA-Up and Complete list: ");
drivers/scsi/aic7xxx/aic79xx_core.c
9774
printk("%d ", scb_index);
drivers/scsi/aic7xxx/aic79xx_core.c
9777
printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9778
printk("Sequencer On QFreeze and Complete list: ");
drivers/scsi/aic7xxx/aic79xx_core.c
9783
printk("%d ", scb_index);
drivers/scsi/aic7xxx/aic79xx_core.c
9786
printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9797
printk("\n\n%s: FIFO%d %s, LONGJMP == 0x%x, SCB 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
9813
printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9816
cur_col += printk("SHADDR = 0x%x%x, SHCNT = 0x%x ",
drivers/scsi/aic7xxx/aic79xx_core.c
9823
printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9826
cur_col += printk("HADDR = 0x%x%x, HCNT = 0x%x ",
drivers/scsi/aic7xxx/aic79xx_core.c
9841
printk("\nLQIN: ");
drivers/scsi/aic7xxx/aic79xx_core.c
9843
printk("0x%x ", ahd_inb(ahd, LQIN + i));
drivers/scsi/aic7xxx/aic79xx_core.c
9844
printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9846
printk("%s: LQISTATE = 0x%x, LQOSTATE = 0x%x, OPTIONMODE = 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
9849
printk("%s: OS_SPACE_CNT = 0x%x MAXCMDCNT = 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
9852
printk("%s: SAVED_SCSIID = 0x%x SAVED_LUN = 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
9856
printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9860
printk("\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9862
printk("%s: REG0 == 0x%x, SINDEX = 0x%x, DINDEX = 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
9865
printk("%s: SCBPTR == 0x%x, SCB_NEXT == 0x%x, SCB_NEXT2 == 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
9869
printk("CDB %x %x %x %x %x %x\n",
drivers/scsi/aic7xxx/aic79xx_core.c
9876
printk("STACK:");
drivers/scsi/aic7xxx/aic79xx_core.c
9880
printk(" 0x%x", ahd->saved_stack[i]);
drivers/scsi/aic7xxx/aic79xx_core.c
9886
printk("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n");
drivers/scsi/aic7xxx/aic79xx_core.c
9905
printk("%3d", i);
drivers/scsi/aic7xxx/aic79xx_core.c
9906
printk("(CTRL 0x%x ID 0x%x N 0x%x N2 0x%x SG 0x%x, RSG 0x%x)\n",
drivers/scsi/aic7xxx/aic79xx_core.c
9914
printk("\n");
drivers/scsi/aic7xxx/aic79xx_osm.c
1009
printk("iocell[%d:%ld] = %d\n", instance, index, value);
drivers/scsi/aic7xxx/aic79xx_osm.c
1019
printk("Setting Global Tags= %d\n", tags);
drivers/scsi/aic7xxx/aic79xx_osm.c
1037
printk("tag_info[%d:%d] = %d\n", instance, targ, value);
drivers/scsi/aic7xxx/aic79xx_osm.c
1078
printk("Malformed Option %s\n",
drivers/scsi/aic7xxx/aic79xx_osm.c
1249
printk(KERN_WARNING "aic79xx: scsi_add_host failed\n");
drivers/scsi/aic7xxx/aic79xx_osm.c
1488
printk(KERN_WARNING
drivers/scsi/aic7xxx/aic79xx_osm.c
1530
printk("Tagged Queuing enabled. Depth %d\n", tags);
drivers/scsi/aic7xxx/aic79xx_osm.c
1765
printk("SCB %d done'd twice\n", SCB_GET_TAG(scb));
drivers/scsi/aic7xxx/aic79xx_osm.c
1805
printk("Set CAM_UNCOR_PARITY\n");
drivers/scsi/aic7xxx/aic79xx_osm.c
1823
printk("CDB:");
drivers/scsi/aic7xxx/aic79xx_osm.c
1825
printk(" 0x%x", scb->io_ctx->cmnd[i]);
drivers/scsi/aic7xxx/aic79xx_osm.c
1826
printk("\n");
drivers/scsi/aic7xxx/aic79xx_osm.c
1828
printk("Saw underflow (%ld of %ld bytes). "
drivers/scsi/aic7xxx/aic79xx_osm.c
1862
printk("Recovery SCB completes\n");
drivers/scsi/aic7xxx/aic79xx_osm.c
1945
printk("Copied %d bytes of sense data at %d:",
drivers/scsi/aic7xxx/aic79xx_osm.c
1949
printk("\n");
drivers/scsi/aic7xxx/aic79xx_osm.c
1950
printk("0x%x ", cmd->sense_buffer[i]);
drivers/scsi/aic7xxx/aic79xx_osm.c
1952
printk("\n");
drivers/scsi/aic7xxx/aic79xx_osm.c
1977
printk("Dropping tag count to %d\n",
drivers/scsi/aic7xxx/aic79xx_osm.c
1996
printk("Locking max tag count at %d\n",
drivers/scsi/aic7xxx/aic79xx_osm.c
2115
printk("%s: device overrun (status %x) on %d:%d:%d\n",
drivers/scsi/aic7xxx/aic79xx_osm.c
2163
printk("CDB:");
drivers/scsi/aic7xxx/aic79xx_osm.c
2165
printk(" 0x%x", cmd->cmnd[cdb_byte]);
drivers/scsi/aic7xxx/aic79xx_osm.c
2166
printk("\n");
drivers/scsi/aic7xxx/aic79xx_osm.c
2224
printk("%s: At time of recovery, card was %spaused\n",
drivers/scsi/aic7xxx/aic79xx_osm.c
2235
printk("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
drivers/scsi/aic7xxx/aic79xx_osm.c
226
printk("(scsi%d:%c:%d:%d): ",
drivers/scsi/aic7xxx/aic79xx_osm.c
2329
printk("Device is disconnected, re-queuing SCB\n");
drivers/scsi/aic7xxx/aic79xx_osm.c
2347
printk("%s: Recovery code sleeping\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_osm.c
2352
printk("%s: Timer Expired (active %d)\n",
drivers/scsi/aic7xxx/aic79xx_osm.c
2356
printk("Recovery code awake\n");
drivers/scsi/aic7xxx/aic79xx_osm.c
2361
printk("%s: Command abort returning 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_osm.c
2398
printk("%s: set period to %d\n", ahd_name(ahd), period);
drivers/scsi/aic7xxx/aic79xx_osm.c
2451
printk("%s: set offset to %d\n", ahd_name(ahd), offset);
drivers/scsi/aic7xxx/aic79xx_osm.c
2487
printk("%s: %s DT\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_osm.c
2529
printk("%s: %s QAS\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_osm.c
2568
printk("%s: %s IU\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_osm.c
2608
printk("%s: %s Read Streaming\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_osm.c
2644
printk("%s: %s Write Flow Control\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_osm.c
2681
printk("%s: RTI not available\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_osm.c
2688
printk("%s: %s RTI\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_osm.c
2724
printk("%s: %s Precompensation\n", ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_osm.c
682
printk("%s: Slave Alloc %d\n", ahd_name(ahd), sdev->id);
drivers/scsi/aic7xxx/aic79xx_osm.c
789
printk("CDB:");
drivers/scsi/aic7xxx/aic79xx_osm.c
791
printk(" 0x%x", cmd->cmnd[cdb_byte]);
drivers/scsi/aic7xxx/aic79xx_osm.c
792
printk("\n");
drivers/scsi/aic7xxx/aic79xx_osm.c
848
printk("%s: Device reset code sleeping\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_osm.c
853
printk("%s: Device reset timer expired (active %d)\n",
drivers/scsi/aic7xxx/aic79xx_osm.c
857
printk("%s: Device reset returning 0x%x\n", ahd_name(ahd), retval);
drivers/scsi/aic7xxx/aic79xx_osm.c
875
printk("%s: Bus reset called for cmd %p\n",
drivers/scsi/aic7xxx/aic79xx_osm.c
885
printk("%s: SCSI bus reset delivered. "
drivers/scsi/aic7xxx/aic79xx_osm_pci.c
131
printk(KERN_ERR "aic79xx: no multichannel peer found!\n");
drivers/scsi/aic7xxx/aic79xx_osm_pci.c
316
printk("aic79xx: PCI Device %d:%d:%d "
drivers/scsi/aic7xxx/aic79xx_osm_pci.c
329
printk("aic79xx: PCI%d:%d:%d MEM region 0x%llx "
drivers/scsi/aic7xxx/aic79xx_osm_pci.c
348
printk("aic79xx: PCI%d:%d:%d IO regions 0x%llx and "
drivers/scsi/aic7xxx/aic79xx_pci.c
333
printk("%s: Enabling 39Bit Addressing\n",
drivers/scsi/aic7xxx/aic79xx_pci.c
521
printk("%s: Reading VPD from SEEPROM...",
drivers/scsi/aic7xxx/aic79xx_pci.c
534
printk("%s: VPD parsing %s\n",
drivers/scsi/aic7xxx/aic79xx_pci.c
539
printk("%s: Reading SEEPROM...", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_pci.c
549
printk("Unable to read SEEPROM\n");
drivers/scsi/aic7xxx/aic79xx_pci.c
556
printk ("checksum error\n");
drivers/scsi/aic7xxx/aic79xx_pci.c
558
printk ("done.\n");
drivers/scsi/aic7xxx/aic79xx_pci.c
608
printk("%s: Seeprom Contents:", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_pci.c
611
printk("\n\t0x%.4x", sc_data[i]);
drivers/scsi/aic7xxx/aic79xx_pci.c
612
printk("\n");
drivers/scsi/aic7xxx/aic79xx_pci.c
618
printk("%s: No SEEPROM available.\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_pci.c
649
printk("%s: STPWLEVEL is %s\n",
drivers/scsi/aic7xxx/aic79xx_pci.c
664
printk("%s: Manual Primary Termination\n",
drivers/scsi/aic7xxx/aic79xx_pci.c
672
printk("%s: Primary Auto-Term Sensing failed! "
drivers/scsi/aic7xxx/aic79xx_pci.c
679
printk("%s: Manual Secondary Termination\n",
drivers/scsi/aic7xxx/aic79xx_pci.c
687
printk("%s: Secondary Auto-Term Sensing failed! "
drivers/scsi/aic7xxx/aic79xx_pci.c
707
printk("%s: Unable to set termination settings!\n",
drivers/scsi/aic7xxx/aic79xx_pci.c
710
printk("%s: Primary High byte termination %sabled\n",
drivers/scsi/aic7xxx/aic79xx_pci.c
714
printk("%s: Primary Low byte termination %sabled\n",
drivers/scsi/aic7xxx/aic79xx_pci.c
718
printk("%s: Secondary High byte termination %sabled\n",
drivers/scsi/aic7xxx/aic79xx_pci.c
722
printk("%s: Secondary Low byte termination %sabled\n",
drivers/scsi/aic7xxx/aic79xx_pci.c
798
printk("%s: PCI error Interrupt\n", ahd_name(ahd));
drivers/scsi/aic7xxx/aic79xx_pci.c
825
printk(s, ahd_name(ahd), pci_status_source[i]);
drivers/scsi/aic7xxx/aic79xx_pci.c
855
printk("%s: PCI Split Interrupt - PCI-X status = 0x%x\n",
drivers/scsi/aic7xxx/aic79xx_pci.c
881
printk(split_status_strings[bit], ahd_name(ahd),
drivers/scsi/aic7xxx/aic79xx_pci.c
888
printk(split_status_strings[bit], ahd_name(ahd), "SG");
drivers/scsi/aic7xxx/aic79xx_pci.c
935
printk("%s: Unable to attach to unsupported chip revision %d\n",
drivers/scsi/aic7xxx/aic79xx_proc.c
227
printk("ahd_proc_write_seeprom: incorrect buffer size\n");
drivers/scsi/aic7xxx/aic79xx_proc.c
233
printk("ahd_proc_write_seeprom: cksum verification failed\n");
drivers/scsi/aic7xxx/aic79xx_proc.c
239
printk("ahd_proc_write_seeprom: No Serial EEPROM\n");
drivers/scsi/aic7xxx/aic79xx_proc.c
248
printk("aic79xx: Unable to allocate serial "
drivers/scsi/aic7xxx/aic79xx_proc.c
253
printk("aic79xx: Writing Serial EEPROM\n");
drivers/scsi/aic7xxx/aic7xxx_93cx6.c
204
printk("\nSerial EEPROM:\n\t");
drivers/scsi/aic7xxx/aic7xxx_93cx6.c
207
printk(KERN_CONT "\n\t");
drivers/scsi/aic7xxx/aic7xxx_93cx6.c
209
printk(KERN_CONT " 0x%x", buf[k]);
drivers/scsi/aic7xxx/aic7xxx_93cx6.c
211
printk(KERN_CONT "\n");
drivers/scsi/aic7xxx/aic7xxx_93cx6.c
237
printk("ahc_write_seeprom: unsupported seeprom type %d\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
1017
printk("ahc_intr - referenced scb "
drivers/scsi/aic7xxx/aic7xxx_core.c
1045
printk("%s: Interrupted for status of 0???\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
1059
printk("SCB %d: requests Check Status\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
1082
printk("Sending Sense\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
1158
printk("%s:%c:%d: no active SCB for reconnecting "
drivers/scsi/aic7xxx/aic7xxx_core.c
1161
printk("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
drivers/scsi/aic7xxx/aic7xxx_core.c
1165
printk("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, "
drivers/scsi/aic7xxx/aic7xxx_core.c
1172
printk("SCSIID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
drivers/scsi/aic7xxx/aic7xxx_core.c
1177
printk("SCSIBUSL == 0x%x, SCSISIGI == 0x%x\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
1179
printk("SXFRCTL0 == 0x%x\n", ahc_inb(ahc, SXFRCTL0));
drivers/scsi/aic7xxx/aic7xxx_core.c
1180
printk("SEQCTL == 0x%x\n", ahc_inb(ahc, SEQCTL));
drivers/scsi/aic7xxx/aic7xxx_core.c
1193
printk("%s:%c:%d: Warning - unknown message received from "
drivers/scsi/aic7xxx/aic7xxx_core.c
1214
printk("%s:%c:%d: unknown scsi bus phase %x, "
drivers/scsi/aic7xxx/aic7xxx_core.c
1225
printk("%s:%c:%d: Missed busfree. "
drivers/scsi/aic7xxx/aic7xxx_core.c
1253
printk("ahc_intr: HOST_MSG_LOOP bad "
drivers/scsi/aic7xxx/aic7xxx_core.c
1354
printk("Unable to clear parity error. "
drivers/scsi/aic7xxx/aic7xxx_core.c
1390
printk("data overrun detected %s."
drivers/scsi/aic7xxx/aic7xxx_core.c
1395
printk("%s seen Data Phase. Length = %ld. NumSGs = %d.\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
1401
printk("sg[%d] - Addr 0x%x%x : Length %d\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
1448
printk("%s:%c:%d:%d: Attempt to issue message failed\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
1468
printk("%s: No free or disconnected SCBs\n", ahc_name(ahc));
drivers/scsi/aic7xxx/aic7xxx_core.c
1478
printk("Bogus TAG after DMA. SCBPTR %d, tag %d, our tag %d\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
1487
printk("%s: BTT calculation out of range\n", ahc_name(ahc));
drivers/scsi/aic7xxx/aic7xxx_core.c
1488
printk("SAVED_SCSIID == 0x%x, SAVED_LUN == 0x%x, "
drivers/scsi/aic7xxx/aic7xxx_core.c
1492
printk("SEQ_FLAGS == 0x%x, SCBPTR == 0x%x, BTT == 0x%x, "
drivers/scsi/aic7xxx/aic7xxx_core.c
1500
printk("SCSIID == 0x%x, SCB_SCSIID == 0x%x, SCB_LUN == 0x%x, "
drivers/scsi/aic7xxx/aic7xxx_core.c
1505
printk("SCSIBUSL == 0x%x, SCSISIGI == 0x%x\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
1512
printk("ahc_intr: seqint, "
drivers/scsi/aic7xxx/aic7xxx_core.c
1557
printk("%s: Spurious SCSI interrupt\n", ahc_name(ahc));
drivers/scsi/aic7xxx/aic7xxx_core.c
1578
printk("%s: Transceiver State Has Changed to %s mode\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
1594
printk("%s: Someone reset channel %c\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
1654
printk("%s:%c:%d: ", ahc_name(ahc), intr_channel,
drivers/scsi/aic7xxx/aic7xxx_core.c
1658
printk("parity error detected %s. "
drivers/scsi/aic7xxx/aic7xxx_core.c
1665
printk("\tCRC Value Mismatch\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
1667
printk("\tNo terminal CRC packet "
drivers/scsi/aic7xxx/aic7xxx_core.c
1670
printk("\tIllegal CRC packet "
drivers/scsi/aic7xxx/aic7xxx_core.c
1673
printk("\tUnexpected %sDT Data Phase\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
1741
printk("%s: ahc_intr - referenced scb not "
drivers/scsi/aic7xxx/aic7xxx_core.c
1750
printk("Saw Selection Timeout for SCB 0x%x\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
1826
printk("SCB %d - Abort%s Completed.\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
1914
printk("%s: ", ahc_name(ahc));
drivers/scsi/aic7xxx/aic7xxx_core.c
1929
printk("Unexpected busfree %s\n"
drivers/scsi/aic7xxx/aic7xxx_core.c
1938
printk("%s: Missing case in ahc_handle_scsiint. status = %x\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
2004
printk("%s: Infinite loop in critical section\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
2083
printk("scb:%p control:0x%x scsiid:0x%x lun:%d cdb_len:%d\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
2089
printk("Shared Data: ");
drivers/scsi/aic7xxx/aic7xxx_core.c
2091
printk("%#02x", hscb->shared_data.cdb[i]);
drivers/scsi/aic7xxx/aic7xxx_core.c
2092
printk(" dataptr:%#x datacnt:%#x sgptr:%#x tag:%#x\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
2099
printk("sg[%d] - Addr 0x%x%x : Length %d\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
2566
printk("%s: target %d synchronous at %sMHz%s, "
drivers/scsi/aic7xxx/aic7xxx_core.c
2572
printk("%s: target %d using "
drivers/scsi/aic7xxx/aic7xxx_core.c
2635
printk("%s: target %d using %dbit transfers\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
2812
printk("%s:%c:%d:%d: ", ahc_name(ahc), devinfo->channel,
drivers/scsi/aic7xxx/aic7xxx_core.c
2884
printk("Bus Device Reset Message Sent\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
2900
printk("Abort%s Message Sent\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
2913
printk("ahc_intr: AWAITING_MSG for an SCB that "
drivers/scsi/aic7xxx/aic7xxx_core.c
2915
printk("SCSIID = %x, target_mask = %x\n", scb->hscb->scsiid,
drivers/scsi/aic7xxx/aic7xxx_core.c
2996
printk("Ensuring async\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
3044
printk("(%s:%c:%d:%d): Sending SDTR period %x, offset %x\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
3062
printk("(%s:%c:%d:%d): Sending WDTR %x\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
3084
printk("(%s:%c:%d:%d): Sending PPR bus_width %x, period %x, "
drivers/scsi/aic7xxx/aic7xxx_core.c
3137
printk("Target did not send an IDENTIFY message. "
drivers/scsi/aic7xxx/aic7xxx_core.c
3146
printk("No SCB found during protocol violation\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
3152
printk("No or incomplete CDB sent to device.\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
3162
printk("Completed command without status.\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
3165
printk("Unknown protocol violation.\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
3179
printk("%s: Issued Channel %c Bus Reset. "
drivers/scsi/aic7xxx/aic7xxx_core.c
3201
printk("Protocol violation %s. Attempting to abort.\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
3234
printk("INITIATOR_MSG_OUT");
drivers/scsi/aic7xxx/aic7xxx_core.c
3241
printk(" PHASEMIS %s\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
3268
printk(" byte 0x%x\n", ahc->send_msg_perror);
drivers/scsi/aic7xxx/aic7xxx_core.c
3298
printk(" byte 0x%x\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
3312
printk("INITIATOR_MSG_IN");
drivers/scsi/aic7xxx/aic7xxx_core.c
3319
printk(" PHASEMIS %s\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
3340
printk(" byte 0x%x\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
3362
printk("Asserting ATN for response\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
3643
printk("(%s:%c:%d:%d): Received "
drivers/scsi/aic7xxx/aic7xxx_core.c
3674
printk("(%s:%c:%d:%d): Target "
drivers/scsi/aic7xxx/aic7xxx_core.c
3716
printk("(%s:%c:%d:%d): Received WDTR "
drivers/scsi/aic7xxx/aic7xxx_core.c
3732
printk("(%s:%c:%d:%d): requested %dBit "
drivers/scsi/aic7xxx/aic7xxx_core.c
3745
printk("(%s:%c:%d:%d): Target "
drivers/scsi/aic7xxx/aic7xxx_core.c
3863
printk("(%s:%c:%d:%d): Target "
drivers/scsi/aic7xxx/aic7xxx_core.c
3868
printk("(%s:%c:%d:%d): Initiator "
drivers/scsi/aic7xxx/aic7xxx_core.c
3880
printk("(%s:%c:%d:%d): Received PPR width %x, "
drivers/scsi/aic7xxx/aic7xxx_core.c
4010
printk("(%s:%c:%d:%d): PPR Rejected. "
drivers/scsi/aic7xxx/aic7xxx_core.c
4026
printk("(%s:%c:%d:%d): refuses WIDE negotiation. Using "
drivers/scsi/aic7xxx/aic7xxx_core.c
4054
printk("(%s:%c:%d:%d): refuses synchronous negotiation. "
drivers/scsi/aic7xxx/aic7xxx_core.c
4065
printk("(%s:%c:%d:%d): refuses tagged commands. "
drivers/scsi/aic7xxx/aic7xxx_core.c
4071
printk("(%s:%c:%d:%d): refuses %s tagged commands. "
drivers/scsi/aic7xxx/aic7xxx_core.c
4121
printk("%s:%c:%d: Message reject for %x -- ignored\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
4346
printk("%s: %s on %c:%d. %d SCBs aborted\n", ahc_name(ahc),
drivers/scsi/aic7xxx/aic7xxx_core.c
4386
printk("aic7xxx: cannot malloc softc!\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
4591
printk("%s: WARNING - Failed chip reset! "
drivers/scsi/aic7xxx/aic7xxx_core.c
4614
printk(" Unsupported adapter type. Ignoring\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
4750
printk("%s: No SCB space found\n", ahc_name(ahc));
drivers/scsi/aic7xxx/aic7xxx_core.c
4848
printk("%s: ahc_init_scbdata - "
drivers/scsi/aic7xxx/aic7xxx_core.c
5196
printk("%s: Downloading Sequencer Program...",
drivers/scsi/aic7xxx/aic7xxx_core.c
5242
printk("Scratch Ram:");
drivers/scsi/aic7xxx/aic7xxx_core.c
5245
printk ("\n ");
drivers/scsi/aic7xxx/aic7xxx_core.c
5247
printk (" 0x%x", ahc_inb(ahc, i));
drivers/scsi/aic7xxx/aic7xxx_core.c
5252
printk ("\n ");
drivers/scsi/aic7xxx/aic7xxx_core.c
5254
printk (" 0x%x", ahc_inb(ahc, i));
drivers/scsi/aic7xxx/aic7xxx_core.c
5257
printk ("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
5353
printk("%s: unable to allocate ahc_tmode_tstate. "
drivers/scsi/aic7xxx/aic7xxx_core.c
5360
printk("%s: unable to allocate ahc_tmode_tstate. "
drivers/scsi/aic7xxx/aic7xxx_core.c
5374
printk("%s: hardware scb %u bytes; kernel scb %u bytes; "
drivers/scsi/aic7xxx/aic7xxx_core.c
5404
printk("%s: Host Adapter Bios disabled. Using default SCSI "
drivers/scsi/aic7xxx/aic7xxx_core.c
5585
printk("Infinite interrupt loop, INTSTAT = %x",
drivers/scsi/aic7xxx/aic7xxx_core.c
5842
printk("qinpos = %d, SCB index = %d\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
5865
printk("Inactive SCB in qinfifo\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
5907
printk("found = %d, qinstart = %d, qinfifionext = %d\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
5945
printk("Waiting List inconsistency. "
drivers/scsi/aic7xxx/aic7xxx_core.c
5953
printk("scb_index = %d, next = %d\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
5977
printk("Inactive SCB in Waiting List\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
6083
printk("Inactive SCB in untaggedQ\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
6130
printk("Disconnected List inconsistency. "
drivers/scsi/aic7xxx/aic7xxx_core.c
6386
printk("Inactive SCB on pending list\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
6664
printk("Handled %sResidual of %d bytes\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
6704
printk("immediate event %x:%x lost\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
6774
printk("0x%08x\n", ins_bytes[0] << 24
drivers/scsi/aic7xxx/aic7xxx_core.c
6842
printk("\n%s: Program too large for instruction memory "
drivers/scsi/aic7xxx/aic7xxx_core.c
6884
printk(" %d instructions downloaded\n", downloaded);
drivers/scsi/aic7xxx/aic7xxx_core.c
6885
printk("%s: Features 0x%x, Bugs 0x%x, Flags 0x%x\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
7061
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7064
printed = printk("%s[0x%x]", name, value);
drivers/scsi/aic7xxx/aic7xxx_core.c
7066
printed += printk(" ");
drivers/scsi/aic7xxx/aic7xxx_core.c
7081
printed += printk("%s%s",
drivers/scsi/aic7xxx/aic7xxx_core.c
7091
printed += printk(") ");
drivers/scsi/aic7xxx/aic7xxx_core.c
7093
printed += printk(" ");
drivers/scsi/aic7xxx/aic7xxx_core.c
7125
printk(">>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<\n"
drivers/scsi/aic7xxx/aic7xxx_core.c
7130
printk("Card was paused\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7131
printk("ACCUM = 0x%x, SINDEX = 0x%x, DINDEX = 0x%x, ARG_2 = 0x%x\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
7134
printk("HCNT = 0x%x SCBPTR = 0x%x\n", ahc_inb(ahc, HCNT),
drivers/scsi/aic7xxx/aic7xxx_core.c
7158
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7159
printk("STACK:");
drivers/scsi/aic7xxx/aic7xxx_core.c
7161
printk(" 0x%x", ahc_inb(ahc, STACK)|(ahc_inb(ahc, STACK) << 8));
drivers/scsi/aic7xxx/aic7xxx_core.c
7162
printk("\nSCB count = %d\n", ahc->scb_data->numscbs);
drivers/scsi/aic7xxx/aic7xxx_core.c
7163
printk("Kernel NEXTQSCB = %d\n", ahc->next_queued_scb->hscb->tag);
drivers/scsi/aic7xxx/aic7xxx_core.c
7164
printk("Card NEXTQSCB = %d\n", ahc_inb(ahc, NEXT_QUEUED_SCB));
drivers/scsi/aic7xxx/aic7xxx_core.c
7166
printk("QINFIFO entries: ");
drivers/scsi/aic7xxx/aic7xxx_core.c
7174
printk("%d ", ahc->qinfifo[qinpos]);
drivers/scsi/aic7xxx/aic7xxx_core.c
7177
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7179
printk("Waiting Queue entries: ");
drivers/scsi/aic7xxx/aic7xxx_core.c
7184
printk("%d:%d ", scb_index, ahc_inb(ahc, SCB_TAG));
drivers/scsi/aic7xxx/aic7xxx_core.c
7187
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7189
printk("Disconnected Queue entries: ");
drivers/scsi/aic7xxx/aic7xxx_core.c
7194
printk("%d:%d ", scb_index, ahc_inb(ahc, SCB_TAG));
drivers/scsi/aic7xxx/aic7xxx_core.c
7197
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7200
printk("QOUTFIFO entries: ");
drivers/scsi/aic7xxx/aic7xxx_core.c
7204
printk("%d ", ahc->qoutfifo[qoutpos]);
drivers/scsi/aic7xxx/aic7xxx_core.c
7207
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7209
printk("Sequencer Free SCB List: ");
drivers/scsi/aic7xxx/aic7xxx_core.c
7214
printk("%d ", scb_index);
drivers/scsi/aic7xxx/aic7xxx_core.c
7217
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7219
printk("Sequencer SCB Info: ");
drivers/scsi/aic7xxx/aic7xxx_core.c
7222
cur_col = printk("\n%3d ", i);
drivers/scsi/aic7xxx/aic7xxx_core.c
7229
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7231
printk("Pending list: ");
drivers/scsi/aic7xxx/aic7xxx_core.c
7236
cur_col = printk("\n%3d ", scb->hscb->tag);
drivers/scsi/aic7xxx/aic7xxx_core.c
7242
printk("(");
drivers/scsi/aic7xxx/aic7xxx_core.c
7246
printk(")");
drivers/scsi/aic7xxx/aic7xxx_core.c
7249
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7251
printk("Kernel Free SCB list: ");
drivers/scsi/aic7xxx/aic7xxx_core.c
7256
printk("%d ", scb->hscb->tag);
drivers/scsi/aic7xxx/aic7xxx_core.c
7258
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7265
printk("Untagged Q(%d): ", target);
drivers/scsi/aic7xxx/aic7xxx_core.c
7270
printk("%d ", scb->hscb->tag);
drivers/scsi/aic7xxx/aic7xxx_core.c
7272
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7275
printk("\n<<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7416
printk("Configuring Target Mode\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7462
printk("Lun already enabled\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7474
printk("Non-zero Group Codes\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7486
printk("Couldn't allocate tstate\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7494
printk("Couldn't allocate lstate\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7505
printk("Couldn't allocate path\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7579
printk("Lun now enabled for target mode\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7598
printk("CTIO pending\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7606
printk("ATIOs pending\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7611
printk("INOTs pending\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7621
printk("Target mode disabled\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7675
printk("Configuring Initiator Mode\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7822
printk("%s: ATIOs exhausted\n", ahc_name(ahc));
drivers/scsi/aic7xxx/aic7xxx_core.c
7827
printk("Incoming command from %d for %d:%d%s\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
7874
printk("Reserved or VU command code type encountered\n");
drivers/scsi/aic7xxx/aic7xxx_core.c
7890
printk("Received Immediate Command %d:%d:%d - %p\n",
drivers/scsi/aic7xxx/aic7xxx_core.c
906
printk("%s: WARNING no command for scb %d "
drivers/scsi/aic7xxx/aic7xxx_core.c
960
printk("%s: brkadrint, %s at seqaddr = 0x%x\n",
drivers/scsi/aic7xxx/aic7xxx_osm.c
1118
printk(KERN_WARNING "aic7xxx: scsi_add_host failed\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c
1358
printk(KERN_WARNING
drivers/scsi/aic7xxx/aic7xxx_osm.c
1401
printk("Tagged Queuing enabled. Depth %d\n", tags);
drivers/scsi/aic7xxx/aic7xxx_osm.c
1699
printk("SCB %d done'd twice\n", scb->hscb->tag);
drivers/scsi/aic7xxx/aic7xxx_osm.c
1731
printk("Set CAM_UNCOR_PARITY\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c
1749
printk("CDB:");
drivers/scsi/aic7xxx/aic7xxx_osm.c
1751
printk(" 0x%x", scb->io_ctx->cmnd[i]);
drivers/scsi/aic7xxx/aic7xxx_osm.c
1752
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c
1754
printk("Saw underflow (%ld of %ld bytes). "
drivers/scsi/aic7xxx/aic7xxx_osm.c
1787
printk("Recovery SCB completes\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c
1851
printk("Copied %d bytes of sense data:",
drivers/scsi/aic7xxx/aic7xxx_osm.c
1855
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c
1856
printk("0x%x ", cmd->sense_buffer[i]);
drivers/scsi/aic7xxx/aic7xxx_osm.c
1858
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c
1900
printk("Locking max tag count at %d\n",
drivers/scsi/aic7xxx/aic7xxx_osm.c
2066
printk("CDB:");
drivers/scsi/aic7xxx/aic7xxx_osm.c
2068
printk(" 0x%x", cmd->cmnd[cdb_byte]);
drivers/scsi/aic7xxx/aic7xxx_osm.c
2069
printk("\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c
2088
printk("%s:%d:%d:%d: Is not an active device\n",
drivers/scsi/aic7xxx/aic7xxx_osm.c
2099
printk("%s:%d:%d:%d: Command found on untagged queue\n",
drivers/scsi/aic7xxx/aic7xxx_osm.c
2156
printk("%s: At time of recovery, card was %spaused\n",
drivers/scsi/aic7xxx/aic7xxx_osm.c
2168
printk("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
drivers/scsi/aic7xxx/aic7xxx_osm.c
2284
printk("Device is disconnected, re-queuing SCB\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c
2309
printk("Recovery code sleeping\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c
2315
printk("Timer Expired\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c
2318
printk("Recovery code awake\n");
drivers/scsi/aic7xxx/aic7xxx_osm.c
256
printk("(scsi%d:%c:%d:%d): ",
drivers/scsi/aic7xxx/aic7xxx_osm.c
643
printk("%s: Slave Alloc %d\n", ahc_name(ahc), sdev->id);
drivers/scsi/aic7xxx/aic7xxx_osm.c
734
printk("aic7xxx_abort returns 0x%x\n", error);
drivers/scsi/aic7xxx/aic7xxx_osm.c
748
printk("aic7xxx_dev_reset returns 0x%x\n", error);
drivers/scsi/aic7xxx/aic7xxx_osm.c
770
printk("%s: SCSI bus reset delivered. "
drivers/scsi/aic7xxx/aic7xxx_osm.c
903
printk("Setting Global Tags= %d\n", tags);
drivers/scsi/aic7xxx/aic7xxx_osm.c
921
printk("tag_info[%d:%d] = %d\n", instance, targ, value);
drivers/scsi/aic7xxx/aic7xxx_osm.c
962
printk("Malformed Option %s\n",
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
173
printk(KERN_ERR "aic7xxx: no multichannel peer found!\n");
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
224
printk(KERN_WARNING "aic7xxx: No suitable DMA available.\n");
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
390
printk("aic7xxx: PCI Device %d:%d:%d "
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
403
printk("aic7xxx: PCI%d:%d:%d MEM region 0x%llx "
drivers/scsi/aic7xxx/aic7xxx_osm_pci.c
422
printk("aic7xxx: PCI%d:%d:%d IO region 0x%llx[0..255] "
drivers/scsi/aic7xxx/aic7xxx_pci.c
1151
printk("%s: External SRAM, %s access%s, %dbytes/SCB\n",
drivers/scsi/aic7xxx/aic7xxx_pci.c
1288
printk("%s: Reading SEEPROM...", ahc_name(ahc));
drivers/scsi/aic7xxx/aic7xxx_pci.c
1305
printk ("checksum error\n");
drivers/scsi/aic7xxx/aic7xxx_pci.c
1307
printk ("done.\n");
drivers/scsi/aic7xxx/aic7xxx_pci.c
1358
printk("%s: No SEEPROM available.\n", ahc_name(ahc));
drivers/scsi/aic7xxx/aic7xxx_pci.c
1395
printk("%s: Low byte termination %sabled\n",
drivers/scsi/aic7xxx/aic7xxx_pci.c
1565
printk("%s: Manual SE Termination\n",
drivers/scsi/aic7xxx/aic7xxx_pci.c
1573
printk("%s: Manual LVD Termination\n",
drivers/scsi/aic7xxx/aic7xxx_pci.c
1600
printk("%s: internal 50 cable %s present",
drivers/scsi/aic7xxx/aic7xxx_pci.c
1605
printk(", internal 68 cable %s present",
drivers/scsi/aic7xxx/aic7xxx_pci.c
1607
printk("\n%s: external cable %s present\n",
drivers/scsi/aic7xxx/aic7xxx_pci.c
1612
printk("%s: BIOS eeprom %s present\n",
drivers/scsi/aic7xxx/aic7xxx_pci.c
1638
printk("%s: Illegal cable configuration!!. "
drivers/scsi/aic7xxx/aic7xxx_pci.c
1660
printk("%s: 68 pin termination "
drivers/scsi/aic7xxx/aic7xxx_pci.c
1663
printk("%s: %sHigh byte termination "
drivers/scsi/aic7xxx/aic7xxx_pci.c
1679
printk("%s: 50 pin termination "
drivers/scsi/aic7xxx/aic7xxx_pci.c
1682
printk("%s: %sLow byte termination "
drivers/scsi/aic7xxx/aic7xxx_pci.c
1692
printk("%s: Primary Low Byte termination "
drivers/scsi/aic7xxx/aic7xxx_pci.c
1705
printk("%s: Primary High Byte "
drivers/scsi/aic7xxx/aic7xxx_pci.c
1717
printk("%s: %sLow byte termination Enabled\n",
drivers/scsi/aic7xxx/aic7xxx_pci.c
1727
printk("%s: %sHigh byte termination Enabled\n",
drivers/scsi/aic7xxx/aic7xxx_pci.c
1933
printk("%s: PCI error Interrupt at seqaddr = 0x%x\n",
drivers/scsi/aic7xxx/aic7xxx_pci.c
1939
printk("%s: Data Parity Error Detected during address "
drivers/scsi/aic7xxx/aic7xxx_pci.c
1943
printk("%s: Signal System Error Detected\n", ahc_name(ahc));
drivers/scsi/aic7xxx/aic7xxx_pci.c
1946
printk("%s: Received a Master Abort\n", ahc_name(ahc));
drivers/scsi/aic7xxx/aic7xxx_pci.c
1949
printk("%s: Received a Target Abort\n", ahc_name(ahc));
drivers/scsi/aic7xxx/aic7xxx_pci.c
1952
printk("%s: Signaled a Target Abort\n", ahc_name(ahc));
drivers/scsi/aic7xxx/aic7xxx_pci.c
1955
printk("%s: Data Parity Error has been reported via PERR#\n",
drivers/scsi/aic7xxx/aic7xxx_pci.c
1964
printk("%s: Latched PCIERR interrupt with "
drivers/scsi/aic7xxx/aic7xxx_pci.c
1971
printk(
drivers/scsi/aic7xxx/aic7xxx_pci.c
2380
printk("RAID functionality unsupported\n");
drivers/scsi/aic7xxx/aic7xxx_pci.c
2398
printk("adapter at unexpected slot %d\n"
drivers/scsi/aic7xxx/aic7xxx_pci.c
2423
printk("adapter at unexpected slot %d\n"
drivers/scsi/aic7xxx/aic7xxx_pci.c
2453
printk("adapter at unexpected slot %d\n"
drivers/scsi/aic7xxx/aic7xxx_pci.c
748
printk("%s: Enabling 39Bit Addressing\n",
drivers/scsi/aic7xxx/aic7xxx_pci.c
892
printk("%s: Using left over BIOS settings\n",
drivers/scsi/aic7xxx/aic7xxx_proc.c
205
printk("ahc_proc_write_seeprom: incorrect buffer size\n");
drivers/scsi/aic7xxx/aic7xxx_proc.c
211
printk("ahc_proc_write_seeprom: cksum verification failed\n");
drivers/scsi/aic7xxx/aic7xxx_proc.c
247
printk("ahc_proc_write_seeprom: unsupported adapter type\n");
drivers/scsi/aic7xxx/aic7xxx_proc.c
252
printk("ahc_proc_write_seeprom: No Serial EEPROM\n");
drivers/scsi/aic7xxx/aic7xxx_proc.c
261
printk("aic7xxx: Unable to allocate serial "
drivers/scsi/aic7xxx/aic7xxx_proc.c
266
printk("aic7xxx: Writing Serial EEPROM\n");
drivers/scsi/aic94xx/aic94xx.h
21
#define asd_printk(fmt, ...) printk(KERN_NOTICE ASD_DRIVER_NAME ": " fmt, ## __VA_ARGS__)
drivers/scsi/aic94xx/aic94xx.h
24
#define ENTER printk(KERN_NOTICE "%s: ENTER %s\n", ASD_DRIVER_NAME, \
drivers/scsi/aic94xx/aic94xx.h
26
#define EXIT printk(KERN_NOTICE "%s: --EXIT %s\n", ASD_DRIVER_NAME, \
drivers/scsi/aic94xx/aic94xx_sds.c
312
printk(KERN_INFO "OCM is not initialized by BIOS,"
drivers/scsi/arcmsr/arcmsr_attr.c
225
printk(KERN_ERR "arcmsr: alloc sysfs mu_read failed\n");
drivers/scsi/arcmsr/arcmsr_attr.c
230
printk(KERN_ERR "arcmsr: alloc sysfs mu_write failed\n");
drivers/scsi/arcmsr/arcmsr_attr.c
235
printk(KERN_ERR "arcmsr: alloc sysfs mu_clear failed\n");
drivers/scsi/arcmsr/arcmsr_hba.c
1065
printk("arcmsr: set DMA 64 mask failed\n");
drivers/scsi/arcmsr/arcmsr_hba.c
1073
printk("arcmsr: set DMA 32-bit mask failed\n");
drivers/scsi/arcmsr/arcmsr_hba.c
1279
printk(KERN_NOTICE
drivers/scsi/arcmsr/arcmsr_hba.c
1293
printk(KERN_NOTICE
drivers/scsi/arcmsr/arcmsr_hba.c
1306
printk(KERN_NOTICE
drivers/scsi/arcmsr/arcmsr_hba.c
1479
printk(KERN_NOTICE
drivers/scsi/arcmsr/arcmsr_hba.c
1502
printk(KERN_NOTICE "arcmsr%d: pCCB ='0x%p' isr got aborted command \n",
drivers/scsi/arcmsr/arcmsr_hba.c
1507
printk(KERN_NOTICE "arcmsr%d: isr get an illegal ccb command \
drivers/scsi/arcmsr/arcmsr_hba.c
2004
printk(KERN_NOTICE
drivers/scsi/arcmsr/arcmsr_hba.c
2017
printk(KERN_NOTICE
drivers/scsi/arcmsr/arcmsr_hba.c
2030
printk(KERN_NOTICE
drivers/scsi/arcmsr/arcmsr_hba.c
266
printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n", acb->host->host_no);
drivers/scsi/arcmsr/arcmsr_hba.c
275
printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n", acb->host->host_no);
drivers/scsi/arcmsr/arcmsr_hba.c
281
printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n", acb->host->host_no);
drivers/scsi/arcmsr/arcmsr_hba.c
291
printk(KERN_NOTICE "arcmsr%d: memory mapping region fail \n", acb->host->host_no);
drivers/scsi/arcmsr/arcmsr_hba.c
3414
printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \
drivers/scsi/arcmsr/arcmsr_hba.c
3428
printk(KERN_ERR "arcmsr%d: can't set driver mode.\n", acb->host->host_no);
drivers/scsi/arcmsr/arcmsr_hba.c
3433
printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \
drivers/scsi/arcmsr/arcmsr_hba.c
3456
printk(KERN_NOTICE "arcmsr%d: wait 'get adapter firmware \
drivers/scsi/arcmsr/arcmsr_hba.c
3611
printk(KERN_NOTICE "arcmsr%d: scsi id = %d lun = %d ccb = '0x%p'"
drivers/scsi/arcmsr/arcmsr_hba.c
3621
printk(KERN_NOTICE "arcmsr%d: polling get an illegal ccb"
drivers/scsi/arcmsr/arcmsr_hba.c
3680
printk(KERN_NOTICE "arcmsr%d: scsi id = %d lun = %d ccb = '0x%p'"
drivers/scsi/arcmsr/arcmsr_hba.c
3690
printk(KERN_NOTICE "arcmsr%d: polling get an illegal ccb"
drivers/scsi/arcmsr/arcmsr_hba.c
3742
printk(KERN_NOTICE "arcmsr%d: scsi id = %d lun = %d ccb = '0x%p'"
drivers/scsi/arcmsr/arcmsr_hba.c
3752
printk(KERN_NOTICE "arcmsr%d: polling get an illegal ccb"
drivers/scsi/arcmsr/arcmsr_hba.c
4075
printk(KERN_NOTICE "arcmsr%d: ""set ccb high \
drivers/scsi/arcmsr/arcmsr_hba.c
4092
printk(KERN_NOTICE "arcmsr%d: cannot set driver mode\n", \
drivers/scsi/arcmsr/arcmsr_hba.c
4110
printk(KERN_NOTICE "arcmsr%d: 'set command Q window' \
drivers/scsi/arcmsr/arcmsr_hba.c
4125
printk(KERN_NOTICE "arcmsr%d: cdb_phyaddr_hi32=0x%x\n",
drivers/scsi/arcmsr/arcmsr_hba.c
4132
printk(KERN_NOTICE "arcmsr%d: 'set command Q window' \
drivers/scsi/arcmsr/arcmsr_hba.c
4330
printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \
drivers/scsi/arcmsr/arcmsr_hba.c
4341
printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \
drivers/scsi/arcmsr/arcmsr_hba.c
4353
printk(KERN_NOTICE "arcmsr%d: wait 'start adapter background \
drivers/scsi/arcmsr/arcmsr_hba.c
4516
printk(KERN_NOTICE "ARCMSR IOP enables EOI_MODE TIMEOUT");
drivers/scsi/arcmsr/arcmsr_hba.c
4536
printk(KERN_NOTICE "arcmsr%d: executing hw bus reset .....\n", acb->host->host_no);
drivers/scsi/arcmsr/arcmsr_hba.c
4743
printk(KERN_NOTICE
drivers/scsi/arcmsr/arcmsr_hba.c
504
printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \
drivers/scsi/arcmsr/arcmsr_hba.c
520
printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \
drivers/scsi/arcmsr/arcmsr_hba.c
537
printk(KERN_NOTICE "arcmsr%d: wait 'flush adapter cache' \
drivers/scsi/arcmsr/arcmsr_hba.c
839
printk(KERN_NOTICE "arcmsr%d: dma_alloc_coherent got error\n", acb->host->host_no);
drivers/scsi/arm/acornscsi.c
1007
printk(KERN_CRIT "scsi%d.%c: I can't handle DMA_OUT!\n",
drivers/scsi/arm/acornscsi.c
1236
printk("scsi%d.%c: Ack! DMA write correction %ld < 0!\n",
drivers/scsi/arm/acornscsi.c
1299
printk("scsi%d: timeout while sending command\n", host->host->host_no);
drivers/scsi/arm/acornscsi.c
1312
printk("scsi%d.%c: sending message ",
drivers/scsi/arm/acornscsi.c
1326
printk("NOP");
drivers/scsi/arm/acornscsi.c
1366
printk("scsi%d: timeout while sending message\n", host->host->host_no);
drivers/scsi/arm/acornscsi.c
1378
printk("\n");
drivers/scsi/arm/acornscsi.c
1457
printk("scsi%d.%c: message in: ",
drivers/scsi/arm/acornscsi.c
1460
printk("\n");
drivers/scsi/arm/acornscsi.c
1481
printk(KERN_ERR "scsi%d.%c: command complete following non-status in phase?\n",
drivers/scsi/arm/acornscsi.c
1555
printk(KERN_NOTICE "scsi%d.%c: Using asynchronous transfer\n",
drivers/scsi/arm/acornscsi.c
1569
printk("scsi%d.%c: reconnect queue tag %02X\n",
drivers/scsi/arm/acornscsi.c
1586
printk(KERN_NOTICE "scsi%d.%c: Using synchronous transfer, offset %d, %d ns\n",
drivers/scsi/arm/acornscsi.c
1626
printk(KERN_ERR "scsi%d.%c: unrecognised message %02X, rejecting\n",
drivers/scsi/arm/acornscsi.c
1689
printk(KERN_ERR "scsi%d.%c: null buffer passed to acornscsi_starttransfer\n",
drivers/scsi/arm/acornscsi.c
1723
printk(KERN_ERR "scsi%d: invalid source id after reselection "
drivers/scsi/arm/acornscsi.c
1730
printk(KERN_ERR "scsi%d.%d: reconnected while command in "
drivers/scsi/arm/acornscsi.c
1755
printk(KERN_ERR "scsi%d.%c: reselected with no command "
drivers/scsi/arm/acornscsi.c
1784
DBG(host->SCpnt, printk("scsi%d.%c: reconnected",
drivers/scsi/arm/acornscsi.c
1790
DBG(host->SCpnt, printk("scsi%d.%c: had to move command "
drivers/scsi/arm/acornscsi.c
1803
DBG(host->SCpnt, printk("scsi%d.%c: had to get command",
drivers/scsi/arm/acornscsi.c
1816
printk(", data pointers: [%p, %X]",
drivers/scsi/arm/acornscsi.c
1821
printk("\n");
drivers/scsi/arm/acornscsi.c
1837
printk(KERN_ERR "scsi%d.%c: unexpected disconnect\n",
drivers/scsi/arm/acornscsi.c
1894
printk(KERN_ERR "scsi%d: reset in standard mode but wanted advanced mode.\n",
drivers/scsi/arm/acornscsi.c
1945
printk(KERN_ERR "scsi%d.%c: PHASE_CONNECTING, SSR %02X?\n",
drivers/scsi/arm/acornscsi.c
1981
printk(KERN_ERR "scsi%d.%c: PHASE_CONNECTED, SSR %02X?\n",
drivers/scsi/arm/acornscsi.c
2019
printk(KERN_ERR "scsi%d.%c: PHASE_MSGOUT, SSR %02X?\n",
drivers/scsi/arm/acornscsi.c
2064
printk(KERN_ERR "scsi%d.%c: PHASE_COMMAND, SSR %02X?\n",
drivers/scsi/arm/acornscsi.c
2077
printk(KERN_ERR "scsi%d.%c: PHASE_DISCONNECT, SSR %02X instead of disconnect?\n",
drivers/scsi/arm/acornscsi.c
2087
printk(KERN_ERR "scsi%d.%c: PHASE_IDLE, SSR %02X while idle?\n",
drivers/scsi/arm/acornscsi.c
2147
printk(KERN_ERR "scsi%d.%c: PHASE_RECONNECTED, SSR %02X after reconnect?\n",
drivers/scsi/arm/acornscsi.c
2196
printk(KERN_ERR "scsi%d.%c: PHASE_DATAIN, SSR %02X?\n",
drivers/scsi/arm/acornscsi.c
2248
printk(KERN_ERR "scsi%d.%c: PHASE_DATAOUT, SSR %02X?\n",
drivers/scsi/arm/acornscsi.c
2269
printk(KERN_ERR "scsi%d.%c: PHASE_STATUSIN, SSR %02X instead of MESSAGE_IN?\n",
drivers/scsi/arm/acornscsi.c
2292
printk("scsi%d.%c: strange message in disconnection\n",
drivers/scsi/arm/acornscsi.c
2299
printk(KERN_ERR "scsi%d.%c: PHASE_MSGIN, SSR %02X after message in?\n",
drivers/scsi/arm/acornscsi.c
2317
printk(KERN_ERR "scsi%d.%c: PHASE_DONE, SSR %02X instead of disconnect?\n",
drivers/scsi/arm/acornscsi.c
232
printk("scsi%d: %s: DMAC %02x @%06x+%04x msk %02x, ",
drivers/scsi/arm/acornscsi.c
2343
printk(KERN_ERR "scsi%d.%c: PHASE_ABORTED, SSR %02X?\n",
drivers/scsi/arm/acornscsi.c
2350
printk(KERN_ERR "scsi%d.%c: unknown driver phase %d\n",
drivers/scsi/arm/acornscsi.c
237
printk("DMA @%06x, ", host->dma.start_addr);
drivers/scsi/arm/acornscsi.c
238
printk("BH @%p +%04x, ", host->scsi.SCp.ptr,
drivers/scsi/arm/acornscsi.c
240
printk("DT @+%04x ST @+%04x", host->dma.transferred,
drivers/scsi/arm/acornscsi.c
2419
printk(KERN_CRIT "scsi%d.%c: WRITE attempted with NO_WRITE flag set\n",
drivers/scsi/arm/acornscsi.c
242
printk("\n");
drivers/scsi/arm/acornscsi.c
2475
printk("on issue queue ");
drivers/scsi/arm/acornscsi.c
2487
printk("on disconnected queue ");
drivers/scsi/arm/acornscsi.c
2494
printk("executing ");
drivers/scsi/arm/acornscsi.c
2540
printk("waiting for execution ");
drivers/scsi/arm/acornscsi.c
2544
printk("unknown ");
drivers/scsi/arm/acornscsi.c
2568
printk(KERN_WARNING "acornscsi_abort: ");
drivers/scsi/arm/acornscsi.c
2574
printk("scsi%d: ", host->host->host_no);
drivers/scsi/arm/acornscsi.c
2584
printk("clear ");
drivers/scsi/arm/acornscsi.c
2597
printk("success\n");
drivers/scsi/arm/acornscsi.c
2609
printk("snooze\n");
drivers/scsi/arm/acornscsi.c
2623
printk("not running\n");
drivers/scsi/arm/acornscsi.c
2651
printk(KERN_WARNING "acornscsi_reset: ");
drivers/scsi/arm/acornscsi.c
272
printk("scsi%d: timeout while %s\n", host->host->host_no, msg);
drivers/scsi/arm/acornscsi.c
2833
printk(KERN_CRIT "scsi%d: IRQ%d not free: %d\n",
drivers/scsi/arm/acornscsi.c
329
printk("scsi%d: timeout while resetting card\n",
drivers/scsi/arm/acornscsi.c
350
printk("scsi%d: timeout while resetting card\n",
drivers/scsi/arm/acornscsi.c
355
printk(KERN_CRIT "scsi%d: WD33C93A didn't give enhanced reset interrupt\n",
drivers/scsi/arm/acornscsi.c
460
printk("%s:%s",
drivers/scsi/arm/acornscsi.c
464
printk("%X:%X", ssr >> 4, ssr & 0x0f);
drivers/scsi/arm/acornscsi.c
472
printk("sbic: %c%c%c%c%c%c ",
drivers/scsi/arm/acornscsi.c
479
printk("scsi: ");
drivers/scsi/arm/acornscsi.c
481
printk(" ph %02X\n", cmdphase);
drivers/scsi/arm/acornscsi.c
483
printk("sbic: %02X scsi: %X:%X ph: %02X\n",
drivers/scsi/arm/acornscsi.c
498
printk("%c: %3s:", target == 8 ? 'H' : '0' + target,
drivers/scsi/arm/acornscsi.c
511
printk("%c%02X", host->status[target][ptr].irq ? '-' : ' ',
drivers/scsi/arm/acornscsi.c
516
printk(" %02X", host->status[target][ptr].ssr);
drivers/scsi/arm/acornscsi.c
523
printk("==^");
drivers/scsi/arm/acornscsi.c
525
printk(" ");
drivers/scsi/arm/acornscsi.c
527
printk(" %02ld", time_diff);
drivers/scsi/arm/acornscsi.c
532
printk("\n");
drivers/scsi/arm/acornscsi.c
711
DBG(host->SCpnt, printk("scsi%d.%c: moved command to disconnected queue\n",
drivers/scsi/arm/acornscsi.c
738
DBG(SCpnt,printk("scsi%d.%c: starting cmd %02X\n",
drivers/scsi/arm/acornscsi.c
853
printk("scsi%d: null command in acornscsi_done", host->host->host_no);
drivers/scsi/arm/arm_scsi.h
115
printk(KERN_WARNING
drivers/scsi/arm/cumana_1.c
270
printk("scsi%d: IRQ%d not free: %d\n",
drivers/scsi/arm/cumana_2.c
239
printk ("PSEUDO_OUT???\n");
drivers/scsi/arm/cumana_2.c
439
printk("scsi%d: IRQ%d not free: %d\n",
drivers/scsi/arm/cumana_2.c
446
printk("scsi%d: DMA%d not free, using PIO\n",
drivers/scsi/arm/eesox.c
557
printk("scsi%d: IRQ%d not free: %d\n",
drivers/scsi/arm/eesox.c
564
printk("scsi%d: DMA%d not free, DMA disabled\n",
drivers/scsi/arm/fas216.c
1042
printk(KERN_ERR "scsi%d.H: error during reselection: bytes",
drivers/scsi/arm/fas216.c
1045
printk(" %02x", msg[i]);
drivers/scsi/arm/fas216.c
1046
printk("\n");
drivers/scsi/arm/fas216.c
1065
printk(KERN_ERR "scsi%d.%c: command complete with no "
drivers/scsi/arm/fas216.c
1149
printk("scsi%d.%c: message was", info->host->host_no, fas216_target(info));
drivers/scsi/arm/fas216.c
1151
printk("%s%02X", i & 31 ? " " : "\n ", message[i]);
drivers/scsi/arm/fas216.c
1152
printk("\n");
drivers/scsi/arm/fas216.c
1265
printk("scsi%d.%c: message in: ",
drivers/scsi/arm/fas216.c
1268
printk("%02X ", message[i]);
drivers/scsi/arm/fas216.c
1269
printk("\n");
drivers/scsi/arm/fas216.c
1508
printk(KERN_ERR "scsi%d.%c: "
drivers/scsi/arm/fas216.c
1521
printk(KERN_ERR "scsi%d.%c: disconnect message received, but bus service %s?\n",
drivers/scsi/arm/fas216.c
1532
printk(KERN_ERR "scsi%d.%c: bus phase %s after %s?\n",
drivers/scsi/arm/fas216.c
164
printk("FAS216: CTCL=%02X CTCM=%02X CMD=%02X STAT=%02X"
drivers/scsi/arm/fas216.c
170
printk(" CNTL1=%02X CNTL2=%02X CNTL3=%02X CTCH=%02X\n",
drivers/scsi/arm/fas216.c
1700
printk("scsi%d.%c: message out: ",
drivers/scsi/arm/fas216.c
1703
printk("{ ");
drivers/scsi/arm/fas216.c
1705
printk("%02x ", msg->msg[i]);
drivers/scsi/arm/fas216.c
1706
printk("} ");
drivers/scsi/arm/fas216.c
1708
printk("\n");
drivers/scsi/arm/fas216.c
179
printk("%sptr %p this_residual 0x%x buffer %p buffers_residual 0x%x%s",
drivers/scsi/arm/fas216.c
193
printk("FAS216_Info=\n");
drivers/scsi/arm/fas216.c
194
printk(" { magic_start=%lX host=%p SCpnt=%p origSCpnt=%p\n",
drivers/scsi/arm/fas216.c
197
printk(" scsi={ io_shift=%X irq=%X cfg={ %X %X %X %X }\n",
drivers/scsi/arm/fas216.c
201
printk(" type=%p phase=%X\n",
drivers/scsi/arm/fas216.c
204
printk(" msgs async_stp=%X disconnectable=%d aborting=%d }\n",
drivers/scsi/arm/fas216.c
207
printk(" stats={ queues=%X removes=%X fins=%X reads=%X writes=%X miscs=%X\n"
drivers/scsi/arm/fas216.c
2126
printk(KERN_WARNING "scsi%d.%c: losing request command\n",
drivers/scsi/arm/fas216.c
213
printk(" ifcfg={ clockrate=%X select_timeout=%X asyncperiod=%X sync_max_depth=%X }\n",
drivers/scsi/arm/fas216.c
217
printk(" busyluns[%d]=%08lx dev[%d]={ disconnect_ok=%d stp=%X sof=%X sync_state=%X }\n",
drivers/scsi/arm/fas216.c
222
printk(" dma={ transfer_type=%X setup=%p pseudo=%p stop=%p }\n",
drivers/scsi/arm/fas216.c
225
printk(" internal_done=%X magic_end=%lX }\n",
drivers/scsi/arm/fas216.c
233
printk(KERN_CRIT "FAS216 Error: magic at start corrupted\n");
drivers/scsi/arm/fas216.c
237
printk(KERN_CRIT "FAS216 Error: magic at end corrupted\n");
drivers/scsi/arm/fas216.c
2370
printk("on issue queue ");
drivers/scsi/arm/fas216.c
2379
printk("on disconnected queue ");
drivers/scsi/arm/fas216.c
2383
printk("executing ");
drivers/scsi/arm/fas216.c
2411
printk("waiting for execution ");
drivers/scsi/arm/fas216.c
2414
printk("unknown ");
drivers/scsi/arm/fas216.c
2793
printk("family %x rev %x\n", family, rev);
drivers/scsi/arm/fas216.c
2893
printk(KERN_CRIT "fas216: invalid clock rate %u MHz\n",
drivers/scsi/arm/fas216.c
298
printk("scsi%d.%c: %s", info->host->host_no, target, buf);
drivers/scsi/arm/fas216.c
333
printk("\n");
drivers/scsi/arm/fas216.c
347
printk("\n");
drivers/scsi/arm/fas216.c
384
printk(KERN_ERR "SCSI IRQ trail\n");
drivers/scsi/arm/fas216.c
386
printk(" %02x:%02x:%02x:%1x",
drivers/scsi/arm/fas216.c
391
printk("\n");
drivers/scsi/arm/fas216.c
394
printk("\n");
drivers/scsi/arm/fas216.c
397
printk(KERN_ERR "FAS216 commands: ");
drivers/scsi/arm/fas216.c
399
printk("%02x:%p ", cmd_list[i].command, cmd_list[i].from);
drivers/scsi/arm/fas216.c
402
printk("\n");
drivers/scsi/arm/fas216.c
649
printk(KERN_WARNING "scsi%d.%c: out of buffers\n",
drivers/scsi/arm/fas216.c
925
printk(KERN_ERR "scsi%d.%c: unexpected disconnect in phase %s\n",
drivers/scsi/arm/fas216.c
960
printk(KERN_ERR "scsi%d.H: incorrect number of bytes after reselect\n",
drivers/scsi/arm/oak.c
46
printk("writing %p len %d\n",addr, len);
drivers/scsi/arm/oak.c
61
printk("reading %p len %d\n", addr, len);
drivers/scsi/arm/oak.c
74
printk("status = %08X\n", status);
drivers/scsi/arm/powertec.c
364
printk("scsi%d: IRQ%d not free: %d\n",
drivers/scsi/arm/powertec.c
371
printk("scsi%d: DMA%d not free, using PIO\n",
drivers/scsi/arm/queue.c
94
printk(KERN_WARNING "freeing non-empty queue %p\n", queue);
drivers/scsi/atari_scsi.c
197
printk(KERN_ERR "SCSI DMA caused bus error near 0x%08lx\n",
drivers/scsi/atari_scsi.c
199
printk(KERN_CRIT "SCSI DMA bus error -- bad DMA programming!");
drivers/scsi/atari_scsi.c
287
printk(KERN_CRIT "SCSI DMA error near 0x%08lx!\n", SCSI_DMA_GETADR());
drivers/scsi/atari_scsi.c
305
printk(KERN_ERR "SCSI DMA error: %ld bytes lost in "
drivers/scsi/atari_scsi.c
399
printk("atari_scsi_setup: no arguments!\n");
drivers/scsi/atp870u.c
1263
printk("atp870u_init_tables fail\n");
drivers/scsi/atp870u.c
142
printk("atp870u_intr_handle enter\n");
drivers/scsi/atp870u.c
1571
printk(KERN_ERR "atp870u: DMA mask required but not available.\n");
drivers/scsi/atp870u.c
1653
printk(" atp870u: abort Channel = %x \n", c);
drivers/scsi/atp870u.c
1654
printk("working=%x last_cmd=%x ", dev->working[c], dev->last_cmd[c]);
drivers/scsi/atp870u.c
1655
printk(" quhdu=%x quendu=%x ", dev->quhd[c], dev->quend[c]);
drivers/scsi/atp870u.c
1657
printk(" r%2x=%2x", j, atp_readb_io(dev, c, j));
drivers/scsi/atp870u.c
1659
printk(" r1c=%2x", atp_readb_io(dev, c, 0x1c));
drivers/scsi/atp870u.c
1660
printk(" r1f=%2x in_snd=%2x ", atp_readb_io(dev, c, 0x1f), dev->in_snd[c]);
drivers/scsi/atp870u.c
1661
printk(" d00=%2x", atp_readb_pci(dev, c, 0x00));
drivers/scsi/atp870u.c
1662
printk(" d02=%2x", atp_readb_pci(dev, c, 0x02));
drivers/scsi/atp870u.c
1666
printk("\n que cdb= ");
drivers/scsi/atp870u.c
1668
printk(" %2x ",workrequ->cmnd[k]);
drivers/scsi/atp870u.c
1670
printk(" last_lenu= %x ",(unsigned int)dev->id[c][j].last_len);
drivers/scsi/atp870u.c
1796
printk(KERN_INFO " ID: %2d Host Adapter\n", dev->host_id[c]);
drivers/scsi/atp870u.c
189
printk("atp870u_intr_handle status = %x\n",i);
drivers/scsi/atp870u.c
1903
printk(KERN_INFO " ID: %2d %s\n", i, &mbuf[8]);
drivers/scsi/atp870u.c
2046
printk("dev->id[%2d][%2d].devsp = %2x\n",
drivers/scsi/atp870u.c
210
printk("dev->id[c][target_id].last_len = %d "
drivers/scsi/atp870u.c
233
printk("Call sent_s870\n");
drivers/scsi/atp870u.c
2378
printk("dev->id[%2d][%2d].devsp = %2x\n",
drivers/scsi/atp870u.c
243
printk("Status 0x85 return\n");
drivers/scsi/atp870u.c
285
printk(KERN_DEBUG "Device reselect\n");
drivers/scsi/atp870u.c
296
printk("cmdp = 0x41\n");
drivers/scsi/atp870u.c
314
printk("cmdp != 0x41\n");
drivers/scsi/atp870u.c
350
printk(KERN_DEBUG " %x",workreq->cmnd[l]);
drivers/scsi/atp870u.c
351
printk("\n");
drivers/scsi/atp870u.c
363
printk("k %x, k[0] 0x%x k[1] 0x%x k[2] 0x%x\n", k,
drivers/scsi/atp870u.c
426
printk("dev->id[c][target_id].last_len = 0\n");
drivers/scsi/atp870u.c
431
printk("target_id = %d adrcnt = %d\n",target_id,adrcnt);
drivers/scsi/atp870u.c
458
printk("dev->id[%d][%d].prdaddr 0x%8x\n",
drivers/scsi/atp870u.c
473
printk("status 0x80 return dirct != 0\n");
drivers/scsi/atp870u.c
481
printk("status 0x80 return dirct = 0\n");
drivers/scsi/atp870u.c
499
printk(KERN_WARNING "AEC67162 CRC ERROR !\n");
drivers/scsi/atp870u.c
517
printk("workreq->scsi_done\n");
drivers/scsi/atp870u.c
541
printk("Call sent_s870(scsi_done)\n");
drivers/scsi/atp870u.c
635
printk("atp870u_queuecommand : req_p->device->channel > 1\n");
drivers/scsi/atp870u.c
672
printk("atp870u_queuecommand : dev->quhd[c] == dev->quend[c]\n");
drivers/scsi/atp870u.c
681
printk("dev->ioport[c] = %x atp_readb_io(dev, c, 0x1c) = %x "
drivers/scsi/atp870u.c
690
printk("Call sent_s870(atp870u_queuecommand)\n");
drivers/scsi/atp870u.c
695
printk("atp870u_queuecommand : exit\n");
drivers/scsi/atp870u.c
722
printk("cmnd in_snd\n");
drivers/scsi/atp870u.c
727
printk("Sent_s870 enter\n");
drivers/scsi/atp870u.c
764
printk("Abort to Send\n");
drivers/scsi/atp870u.c
771
printk("OK to Send\n");
drivers/scsi/atp870u.c
774
printk(" %x",workreq->cmnd[i]);
drivers/scsi/atp870u.c
776
printk("\n");
drivers/scsi/atp870u.c
809
printk("send_s870 while loop 1\n");
drivers/scsi/atp870u.c
830
printk("dev->id[%d][%d].devsp = %2x\n",c,target_id,
drivers/scsi/atp870u.c
845
printk("dev->id[%2d][%2d].last_len = %d\n",c,j,dev->id[c][j].last_len);
drivers/scsi/atp870u.c
866
printk("change SCSI_CMD_REG 0x08\n");
drivers/scsi/atp870u.c
889
printk("1. bttl %x, l %x\n",bttl, l);
drivers/scsi/atp870u.c
906
printk("prd %4x %4x %4x %4x\n",
drivers/scsi/atp870u.c
911
printk("2. bttl %x, l %x\n",bttl, l);
drivers/scsi/atp870u.c
915
printk("send_s870: prdaddr_2 0x%8x target_id %d\n",
drivers/scsi/atp870u.c
959
printk( "start DMA(to target)\n");
drivers/scsi/atp870u.c
971
printk( "start DMA(to host)\n");
drivers/scsi/be2iscsi/be_iscsi.c
110
printk(KERN_INFO "In beiscsi_session_destroy\n");
drivers/scsi/be2iscsi/be_main.c
5820
printk(KERN_ERR
drivers/scsi/be2iscsi/be_main.c
5824
printk(KERN_INFO "In beiscsi_module_init, tt=%p\n",
drivers/scsi/be2iscsi/be_main.c
5829
printk(KERN_ERR
drivers/scsi/bfa/bfa_cs.h
111
printk(KERN_ERR "Assertion failure: %s:%d: %d", \
drivers/scsi/bfa/bfad.c
1014
printk(KERN_WARNING "bfad%d: failed to create pbc vport"
drivers/scsi/bfa/bfad.c
1196
printk(KERN_WARNING "bfa %s: trying one msix "
drivers/scsi/bfa/bfad.c
1205
printk(KERN_WARNING "bfad%d: "
drivers/scsi/bfa/bfad.c
1282
printk(KERN_WARNING "Error alloc trace buffer!\n");
drivers/scsi/bfa/bfad.c
1304
printk(KERN_WARNING "bfad_pci_init failure!\n");
drivers/scsi/bfa/bfad.c
1676
printk(KERN_WARNING "bfad_im_module_init failure\n");
drivers/scsi/bfa/bfad.c
1689
printk(KERN_WARNING "pci_register_driver failure\n");
drivers/scsi/bfa/bfad.c
1719
printk(KERN_ALERT "Can't locate firmware %s\n", fw_name);
drivers/scsi/bfa/bfad.c
1726
printk(KERN_ALERT "Fail to allocate buffer for fw image "
drivers/scsi/bfa/bfad.c
173
printk(KERN_INFO "bfad[%d]: Kernel thread "
drivers/scsi/bfa/bfad.c
208
printk(KERN_WARNING "bfad%d: bfad_setup_intr failed\n",
drivers/scsi/bfa/bfad.c
221
printk(KERN_WARNING "%s: install_msix failed, bfad%d\n",
drivers/scsi/bfa/bfad.c
232
printk(KERN_WARNING
drivers/scsi/bfa/bfad.c
726
printk(KERN_ERR "pci_enable_device fail %p\n", pdev);
drivers/scsi/bfa/bfad.c
738
printk(KERN_ERR "dma_set_mask_and_coherent fail %p\n", pdev);
drivers/scsi/bfa/bfad.c
746
printk(KERN_ERR "Fail to map bar0\n");
drivers/scsi/bfa/bfad.c
772
printk(KERN_WARNING "BFA[%s]: "
drivers/scsi/bfa/bfad.c
778
printk(KERN_WARNING "BFA[%s]: invalid "
drivers/scsi/bfa/bfad.c
818
printk(KERN_WARNING "bfad%d bfad_hal_mem_alloc failure\n",
drivers/scsi/bfa/bfad.c
820
printk(KERN_WARNING
drivers/scsi/bfa/bfad.c
987
printk(KERN_WARNING "bfad_im_probe failed\n");
drivers/scsi/bfa/bfad_bsg.c
3470
printk(KERN_INFO "bfa %s: fcpt request buffer alloc failed\n",
drivers/scsi/bfa/bfad_bsg.c
3478
printk(KERN_INFO "bfa %s: fcpt response buffer alloc failed\n",
drivers/scsi/bfa/bfad_bsg.c
3493
printk(KERN_INFO "bfa %s: fcpt request fcxp_map_sg failed\n",
drivers/scsi/bfa/bfad_bsg.c
3509
printk(KERN_INFO "bfa %s: fcpt response fcxp_map_sg failed\n",
drivers/scsi/bfa/bfad_debugfs.c
121
printk(KERN_INFO "bfad[%d]: Failed to allocate fwsave buffer\n",
drivers/scsi/bfa/bfad_debugfs.c
135
printk(KERN_INFO "bfad[%d]: Failed to collect fwsave\n",
drivers/scsi/bfa/bfad_debugfs.c
259
printk(KERN_INFO
drivers/scsi/bfa/bfad_debugfs.c
273
printk(KERN_INFO "bfad[%d]: Failed to allocate regrd buffer\n",
drivers/scsi/bfa/bfad_debugfs.c
285
printk(KERN_INFO "bfad[%d]: Failed reg offset check\n",
drivers/scsi/bfa/bfad_debugfs.c
326
printk(KERN_INFO
drivers/scsi/bfa/bfad_debugfs.c
339
printk(KERN_INFO
drivers/scsi/bfa/bfad_debugfs.c
79
printk(KERN_INFO "bfad[%d]: Failed to allocate fwtrc buffer\n",
drivers/scsi/bfa/bfad_debugfs.c
93
printk(KERN_INFO "bfad[%d]: Failed to collect fwtrc\n",
drivers/scsi/bfa/bfad_im.c
1140
printk(KERN_WARNING
drivers/scsi/bfa/bfad_im.c
1239
printk(KERN_WARNING
drivers/scsi/bfa/bfad_im.c
1256
printk(KERN_WARNING "hal_io failure\n");
drivers/scsi/bfa/bfad_im.c
545
printk(KERN_WARNING "idr_alloc failure\n");
drivers/scsi/bfa/bfad_im.c
573
printk(KERN_WARNING "scsi_add_host failure %d\n", error);
drivers/scsi/bnx2fc/bnx2fc_els.c
161
printk(KERN_ERR PFX "Unable to alloc mp buf\n");
drivers/scsi/bnx2fc/bnx2fc_els.c
166
printk(KERN_ERR PFX "l2_els_compl: resp len is "
drivers/scsi/bnx2fc/bnx2fc_els.c
194
printk(KERN_ERR PFX "Unable to allocate cb_arg for ADISC\n");
drivers/scsi/bnx2fc/bnx2fc_els.c
222
printk(KERN_ERR PFX "Unable to allocate cb_arg for LOGO\n");
drivers/scsi/bnx2fc/bnx2fc_els.c
250
printk(KERN_ERR PFX "Unable to allocate cb_arg for LOGO\n");
drivers/scsi/bnx2fc/bnx2fc_els.c
332
printk(KERN_ERR PFX "srr buf: mem alloc failure\n");
drivers/scsi/bnx2fc/bnx2fc_els.c
340
printk(KERN_ERR PFX "fc_frame_alloc failure\n");
drivers/scsi/bnx2fc/bnx2fc_els.c
457
printk(KERN_ERR PFX "rec buf: mem alloc failure\n");
drivers/scsi/bnx2fc/bnx2fc_els.c
465
printk(KERN_ERR PFX "fc_frame_alloc failure\n");
drivers/scsi/bnx2fc/bnx2fc_els.c
597
printk(KERN_ERR PFX "Unable to allocate cb_arg for REC\n");
drivers/scsi/bnx2fc/bnx2fc_els.c
638
printk(KERN_ERR PFX "Unable to allocate cb_arg for SRR\n");
drivers/scsi/bnx2fc/bnx2fc_els.c
691
printk(KERN_ERR PFX "els 0x%x: rport not ready\n", op);
drivers/scsi/bnx2fc/bnx2fc_els.c
696
printk(KERN_ERR PFX "els 0x%x: link is not ready\n", op);
drivers/scsi/bnx2fc/bnx2fc_els.c
701
printk(KERN_ERR PFX "els 0x%x: tgt not ready\n", op);
drivers/scsi/bnx2fc/bnx2fc_els.c
722
printk(KERN_ERR PFX "ELS MP request init failed\n");
drivers/scsi/bnx2fc/bnx2fc_els.c
741
printk(KERN_ERR PFX "Invalid ELS op 0x%x\n", op);
drivers/scsi/bnx2fc/bnx2fc_els.c
782
printk(KERN_ERR PFX "initiate_els.. session not ready\n");
drivers/scsi/bnx2fc/bnx2fc_els.c
85
printk(KERN_ERR PFX "Unable to allocate cb_arg for RRQ\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1009
printk(KERN_ERR PFX "em_config:fc_exch_mgr_alloc failed\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1134
printk(KERN_ERR PFX "Failed to create vport, "
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1141
printk(KERN_ERR PFX "vn ports cannot be created on"
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1152
printk(KERN_ERR PFX "bnx2fc_vport_create (%s) failed\n",
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1244
printk(KERN_INFO "%2x:%2x:%2x:%2x:%2x:%2x\n", ha->addr[0],
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1280
printk(KERN_ERR PFX "Failed to attach FC transport\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1287
printk(KERN_ERR PFX
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1364
printk(KERN_ERR PFX "Unable to allocate hba structure\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1380
printk(KERN_ERR PFX "create_adapter: bind error\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1389
printk(KERN_ERR PFX "Unable to allocate tgt offload list\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1397
printk(KERN_ERR PFX "em_config:bnx2fc_cmd_mgr_alloc failed\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1446
printk(KERN_ERR PFX "Unable to allocate interface structure\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1511
printk(KERN_ERR PFX "could not allocate scsi host structure\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1526
printk(KERN_ERR PFX "Setting vport names, 0x%llX 0x%llX\n",
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1534
printk(KERN_ERR PFX "Error on bnx2fc_net_config\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1540
printk(KERN_ERR PFX "Couldn't configure shost for %s\n",
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1548
printk(KERN_ERR PFX "Couldn't configure libfc\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1566
printk(KERN_ERR PFX "Error on bnx2fc_em_config\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1673
printk(KERN_ERR PFX "bnx2fc_destroy: interface or lport not found\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1729
printk(KERN_ERR PFX "cnic is NULL\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1843
printk(KERN_ERR PFX "ulp_init: start discovery\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1889
printk(KERN_ALERT PFX
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1896
printk(KERN_ALERT PFX
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1909
printk(KERN_ERR PFX "bnx2fc_start: %s failed to initialize. "
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1962
printk(KERN_ERR "ULP_STOP\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
1995
printk(KERN_ERR PFX "Init not done yet\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2043
printk(KERN_ERR PFX "bnx2fc FCoE not supported on %s,"
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2051
printk(KERN_ERR PFX "hba initialization failed\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2068
printk(KERN_ERR PFX "register_device failed, rc = %d\n", rc);
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2306
printk(KERN_ERR "fip mode not FABRIC\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2328
printk(KERN_ERR PFX "Not a netxtreme2 device\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2333
printk(KERN_ERR PFX "unable to obtain drv_info\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2342
printk(KERN_ERR PFX "bnx2fc_create: hba not found\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2353
printk(KERN_ERR PFX "bnx2fc_interface_create failed\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2371
printk(KERN_ERR PFX "ulp_init could not create timer_wq\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2378
printk(KERN_ERR PFX "Failed to create interface (%s)\n",
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2506
printk(KERN_ERR PFX "adapter_lookup: hba NULL\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2523
printk(KERN_ERR PFX "bnx2fc port check: %s, flags: %lx\n",
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2531
printk(KERN_ERR PFX "bnx2fc_ulp_exit: hba not found, dev 0%p\n",
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2680
printk(KERN_INFO PFX "%s", version);
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2685
printk(KERN_ERR "failed to register an fcoe transport, check "
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
2768
printk(KERN_ERR PFX "MOD_EXIT:destroy hba = 0x%p\n",
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
440
printk(KERN_ERR PFX "bnx2fc_rcv: lport is NULL\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
449
printk(KERN_ERR PFX "bnx2fc_rcv: Wrong FC type frame\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
524
printk(KERN_ERR PFX "Invalid lport struct\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
630
printk(KERN_WARNING PFX "dropping frame with "
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
749
printk(KERN_ERR PFX "Error on scsi_add_host\n");
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
845
printk(KERN_ERR PFX "ERROR:bnx2fc_destroy_timer - "
drivers/scsi/bnx2fc/bnx2fc_fcoe.c
879
printk(KERN_ERR "indicate_netevent: "\
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1081
printk(KERN_ERR PFX "process_new_cqes: cq is NULL\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1137
printk(KERN_ERR PFX "conn_id 0x%x not valid\n", conn_id);
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1165
printk(KERN_ALERT PFX "ERROR:ofld_cmpl: No pending ofld req\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1172
printk(KERN_ERR PFX "ERROR:ofld_cmpl: HBA mismatch\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1183
printk(KERN_ERR PFX "unable to allocate FCoE context "
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1217
printk(KERN_ERR PFX "ERROR:enbl_cmpl: No pending ofld req\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1229
printk(KERN_ERR PFX "context id mismatch\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1234
printk(KERN_ERR PFX "bnx2fc-enbl_cmpl: HBA mismatch\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1256
printk(KERN_ERR PFX "ERROR: disable_cmpl: No disable req\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1263
printk(KERN_ERR PFX "Disable failed with cmpl status %d\n",
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1288
printk(KERN_ERR PFX "destroy_cmpl: No destroy req\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1295
printk(KERN_ERR PFX "Destroy conn failed, cmpl status %d\n",
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1312
printk(KERN_ERR PFX "init_failure due to invalid opcode\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1316
printk(KERN_ERR PFX "init failed due to ctx alloc failure\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1320
printk(KERN_ERR PFX "init_failure due to NIC error\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1323
printk(KERN_ERR PFX "init failure due to compl status err\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1326
printk(KERN_ERR PFX "init failure due to HSI mismatch\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1329
printk(KERN_ERR PFX "Unknown Error code %d\n", err_code);
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1373
printk(KERN_INFO PFX "[%.2x]: FCOE_INIT passed\n",
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1382
printk(KERN_ERR PFX "DESTROY failed\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1384
printk(KERN_ERR PFX "DESTROY success\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1401
printk(KERN_ERR PFX "STAT failed\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1407
printk(KERN_ERR PFX "unknown opcode 0x%x\n",
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1886
printk(KERN_ERR PFX "unable to allocate task context BDT\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1899
printk(KERN_ERR PFX "unable to allocate task context array\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1910
printk(KERN_ERR PFX "unable to alloc context mapping array\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
1923
printk(KERN_ERR PFX "unable to alloc task context\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
2044
printk(KERN_ERR PFX "hash table pointers alloc failed\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
2050
printk(KERN_ERR PFX "hash table pointers (dma) alloc failed\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
2060
printk(KERN_ERR PFX "hash segment alloc failed\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
2069
printk(KERN_ERR PFX "hash table pbl alloc failed\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
2128
printk(KERN_ERR PFX "unable to allocate t2 hash table ptr\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
2139
printk(KERN_ERR PFX "unable to allocate t2 hash table\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
2154
printk(KERN_ERR PFX "unable to alloc MP Dummy Buffer\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
2163
printk(KERN_ERR PFX "unable to alloc Stats Buffer\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
394
printk(KERN_ERR PFX "WARN: enable_req port_id = 0x%x,"
drivers/scsi/bnx2fc/bnx2fc_hwi.c
577
printk(KERN_ERR PFX "fc_frame_alloc failure\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
602
printk(KERN_ERR PFX "dropping ELS 0x%x\n", op);
drivers/scsi/bnx2fc/bnx2fc_hwi.c
715
printk(KERN_ERR PFX "err_warn: Not a SCSI cmd\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
72
printk(KERN_ERR PFX "hba->cnic NULL during fcoe fw init\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
744
printk(KERN_ERR PFX "err_warn: io_req (0x%x) already "
drivers/scsi/bnx2fc/bnx2fc_hwi.c
771
printk(KERN_ERR PFX "SRR in progress\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
788
printk(KERN_ERR PFX "err_warn: initiate_abts "
drivers/scsi/bnx2fc/bnx2fc_hwi.c
836
printk(KERN_ERR PFX "err_warn: Not a SCSI cmd\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
854
printk(KERN_ERR PFX "Unsol Compl: Invalid CQE Subtype\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
878
printk(KERN_ERR PFX "ERROR? cq_compl - io_req is NULL\n");
drivers/scsi/bnx2fc/bnx2fc_hwi.c
906
printk(KERN_ERR PFX "Invalid rx state - %d\n",
drivers/scsi/bnx2fc/bnx2fc_hwi.c
934
printk(KERN_ERR PFX "Invalid rx state = %d\n",
drivers/scsi/bnx2fc/bnx2fc_hwi.c
951
printk(KERN_ERR PFX "Invalid cmd_type %d\n", cmd_type);
drivers/scsi/bnx2fc/bnx2fc_io.c
1010
printk(KERN_ERR PFX "cleanup: couldn't allocate cmd\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
1140
printk(KERN_ERR PFX "eh_abort: link not ready\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
1152
printk(KERN_ERR PFX "eh_abort: io_req is NULL\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
1171
printk(KERN_ERR PFX "eh_abort: io_req (xid = 0x%x) "
drivers/scsi/bnx2fc/bnx2fc_io.c
1179
printk(KERN_ERR PFX "eh_abort: io_req (xid = 0x%x) "
drivers/scsi/bnx2fc/bnx2fc_io.c
1205
printk(KERN_ERR PFX "eh_abort: io_req (xid = 0x%x) "
drivers/scsi/bnx2fc/bnx2fc_io.c
1259
printk(KERN_ERR PFX "abort failed, xid = 0x%x\n",
drivers/scsi/bnx2fc/bnx2fc_io.c
1301
printk(KERN_ERR PFX "seq cleanup ignored - xid = 0x%x\n",
drivers/scsi/bnx2fc/bnx2fc_io.c
1311
printk(KERN_ERR PFX "clnup_compl: Unable to send SRR"
drivers/scsi/bnx2fc/bnx2fc_io.c
1415
printk(KERN_ERR PFX "Unknown ABTS response\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
1484
printk(KERN_ERR PFX "lun_rst: abts already in"
drivers/scsi/bnx2fc/bnx2fc_io.c
151
printk(KERN_ERR PFX "cmd_timeout: invalid cmd_type %d\n",
drivers/scsi/bnx2fc/bnx2fc_io.c
1517
printk(KERN_ERR PFX "tgt_rst: abts already in progress"
drivers/scsi/bnx2fc/bnx2fc_io.c
1572
printk(KERN_ERR PFX "tmf's fc_hdr r_ctl = 0x%x\n",
drivers/scsi/bnx2fc/bnx2fc_io.c
1577
printk(KERN_ERR PFX "tm_compl: io_req is NULL\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
1613
printk(KERN_ERR PFX "Command not on active_cmd_queue!\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
1689
printk(KERN_ERR PFX "byte_count = %d != scsi_bufflen = %d, "
drivers/scsi/bnx2fc/bnx2fc_io.c
1800
printk(KERN_ERR PFX "invalid sns length %d\n",
drivers/scsi/bnx2fc/bnx2fc_io.c
1818
printk(KERN_ERR PFX "Truncating sense buffer\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
186
printk(KERN_ERR PFX "scsi_done - sc_cmd NULL. "
drivers/scsi/bnx2fc/bnx2fc_io.c
1891
printk(KERN_ERR PFX "Unable to post io_req\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
1933
printk(KERN_ERR PFX "scsi_cmd_compl - sc_cmd is NULL\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
1945
printk(KERN_ERR PFX "io_req is NULL\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
2012
printk(KERN_ERR PFX "scsi_cmd_compl: fcp_status = %d\n",
drivers/scsi/bnx2fc/bnx2fc_io.c
2060
printk(KERN_ERR PFX "BD list creation failed\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
2074
printk(KERN_ERR PFX "Flush in progress..Host Busy\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
2080
printk(KERN_ERR PFX "Session not ready...post_io\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
227
printk(KERN_ERR PFX "cmd_mgr_alloc: Invalid min_xid 0x%x \
drivers/scsi/bnx2fc/bnx2fc_io.c
239
printk(KERN_ERR PFX "failed to alloc cmgr\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
246
printk(KERN_ERR PFX "failed to alloc free_list\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
252
printk(KERN_ERR PFX "failed to alloc free_list_lock\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
276
printk(KERN_ERR PFX "failed to alloc io_req\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
298
printk(KERN_ERR PFX "failed to alloc io_bdt_pool\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
306
printk(KERN_ERR PFX "failed to alloc "
drivers/scsi/bnx2fc/bnx2fc_io.c
321
printk(KERN_ERR PFX "failed to alloc "
drivers/scsi/bnx2fc/bnx2fc_io.c
430
printk(KERN_ERR PFX "elstm_alloc: list_empty\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
600
printk(KERN_ERR PFX "unable to alloc MP req buffer\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
609
printk(KERN_ERR PFX "unable to alloc TM resp buffer\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
622
printk(KERN_ERR PFX "unable to alloc MP req bd\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
630
printk(KERN_ERR PFX "unable to alloc MP resp bd\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
680
printk(KERN_ERR PFX "device_reset: rport is NULL\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
691
printk(KERN_ERR PFX "device_reset: link is not ready\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
699
printk(KERN_ERR PFX "device_reset: tgt not offloaded\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
707
printk(KERN_ERR PFX "tmf: Failed TMF");
drivers/scsi/bnx2fc/bnx2fc_io.c
723
printk(KERN_ERR PFX "Task mgmt MP request init failed\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
840
printk(KERN_ERR PFX "initiate_abts: tgt not offloaded\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
846
printk(KERN_ERR PFX "initiate_abts: rport is NULL\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
852
printk(KERN_ERR PFX "initiate_abts: link is not ready\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
859
printk(KERN_ERR PFX "abts: couldn't allocate cmd\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
945
printk(KERN_ERR PFX "Unable to alloc cb_arg for seq clnup\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
952
printk(KERN_ERR PFX "cleanup: couldn't allocate cmd\n");
drivers/scsi/bnx2fc/bnx2fc_io.c
978
printk(KERN_ERR PFX "call init_seq_cleanup_task\n");
drivers/scsi/bnx2fc/bnx2fc_tgt.c
102
printk(KERN_ERR PFX "Failed to allocate resources\n");
drivers/scsi/bnx2fc/bnx2fc_tgt.c
115
printk(KERN_ERR PFX "ofld_req failed\n");
drivers/scsi/bnx2fc/bnx2fc_tgt.c
138
printk(KERN_ERR PFX "map doorbell failed - no mem\n");
drivers/scsi/bnx2fc/bnx2fc_tgt.c
268
printk(KERN_ERR PFX "CLEANUP on port 0x%x:"
drivers/scsi/bnx2fc/bnx2fc_tgt.c
330
printk(KERN_ERR PFX "ERROR!! destroy timed out\n");
drivers/scsi/bnx2fc/bnx2fc_tgt.c
336
printk(KERN_ERR PFX "ERROR!! DISABLE req failed, destroy"
drivers/scsi/bnx2fc/bnx2fc_tgt.c
339
printk(KERN_ERR PFX "ERROR!! DISABLE req timed out, destroy"
drivers/scsi/bnx2fc/bnx2fc_tgt.c
454
printk(KERN_ERR PFX "rport is NULL: ERROR!\n");
drivers/scsi/bnx2fc/bnx2fc_tgt.c
466
printk(KERN_ERR PFX "%x - rport_event_handler ERROR\n",
drivers/scsi/bnx2fc/bnx2fc_tgt.c
531
printk(KERN_INFO PFX "%x - rport not created Yet!!\n",
drivers/scsi/bnx2fc/bnx2fc_tgt.c
675
printk(KERN_ERR PFX "unable to allocate SQ memory %d\n",
drivers/scsi/bnx2fc/bnx2fc_tgt.c
688
printk(KERN_ERR PFX "unable to allocate CQ memory %d\n",
drivers/scsi/bnx2fc/bnx2fc_tgt.c
701
printk(KERN_ERR PFX "unable to allocate RQ memory %d\n",
drivers/scsi/bnx2fc/bnx2fc_tgt.c
713
printk(KERN_ERR PFX "unable to allocate RQ PBL %d\n",
drivers/scsi/bnx2fc/bnx2fc_tgt.c
739
printk(KERN_ERR PFX "unable to allocate XFERQ %d\n",
drivers/scsi/bnx2fc/bnx2fc_tgt.c
753
printk(KERN_ERR PFX "unable to allocate CONFQ %d\n",
drivers/scsi/bnx2fc/bnx2fc_tgt.c
767
printk(KERN_ERR PFX "unable to allocate CONFQ PBL %d\n",
drivers/scsi/bnx2fc/bnx2fc_tgt.c
791
printk(KERN_ERR PFX "unable to allocate conn_db %d\n",
drivers/scsi/bnx2fc/bnx2fc_tgt.c
806
printk(KERN_ERR PFX "unable to allocate lcq %d\n",
drivers/scsi/bnx2fc/bnx2fc_tgt.c
94
printk(KERN_ERR PFX "Failed to allocate conn id for "
drivers/scsi/bnx2i/bnx2i_hwi.c
1064
printk(KERN_ALERT "bnx2i: unable to alloc SQ PT mem (%d)\n",
drivers/scsi/bnx2i/bnx2i_hwi.c
1074
printk(KERN_ALERT "bnx2i: unable to alloc SQ BD memory %d\n",
drivers/scsi/bnx2i/bnx2i_hwi.c
1100
printk(KERN_ALERT "bnx2i: unable to alloc CQ PT memory %d\n",
drivers/scsi/bnx2i/bnx2i_hwi.c
1110
printk(KERN_ALERT "bnx2i: unable to alloc CQ BD memory %d\n",
drivers/scsi/bnx2i/bnx2i_hwi.c
1142
printk(KERN_ALERT "bnx2i: unable to alloc RQ PT mem %d\n",
drivers/scsi/bnx2i/bnx2i_hwi.c
1152
printk(KERN_ALERT "bnx2i: unable to alloc RQ BD memory %d\n",
drivers/scsi/bnx2i/bnx2i_hwi.c
118
printk(KERN_ERR "bnx2i: iSCSI not supported, dev=%s\n",
drivers/scsi/bnx2i/bnx2i_hwi.c
122
printk(KERN_ERR "bnx2i: LOM is not enable to "
drivers/scsi/bnx2i/bnx2i_hwi.c
1840
printk(KERN_ALERT "bnx2i: cmd clean ITT %x not active\n",
drivers/scsi/bnx2i/bnx2i_hwi.c
1971
printk(KERN_ALERT "bnx2i (%s): cq resr freed in bh execution!",
drivers/scsi/bnx2i/bnx2i_hwi.c
1983
printk(KERN_ALERT "bnx2i: Unsolicited "
drivers/scsi/bnx2i/bnx2i_hwi.c
2040
printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
drivers/scsi/bnx2i/bnx2i_hwi.c
2049
printk(KERN_ALERT "bnx2i (%s): no active cmd! "
drivers/scsi/bnx2i/bnx2i_hwi.c
2097
printk(KERN_ALERT "cid #%x not valid\n", iscsi_cid);
drivers/scsi/bnx2i/bnx2i_hwi.c
2101
printk(KERN_ALERT "cid #%x - ep not bound\n", iscsi_cid);
drivers/scsi/bnx2i/bnx2i_hwi.c
2130
printk(KERN_ALERT "conn_update: cid %x not valid\n", iscsi_cid);
drivers/scsi/bnx2i/bnx2i_hwi.c
2134
printk(KERN_ALERT "cid %x does not have ep bound\n", iscsi_cid);
drivers/scsi/bnx2i/bnx2i_hwi.c
2139
printk(KERN_ALERT "request failed cid %x\n", iscsi_cid);
drivers/scsi/bnx2i/bnx2i_hwi.c
2181
printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid);
drivers/scsi/bnx2i/bnx2i_hwi.c
2185
printk(KERN_ALERT "bnx2i - cid 0x%x had TCP errors, error code 0x%x\n",
drivers/scsi/bnx2i/bnx2i_hwi.c
2217
printk(KERN_ALERT "bnx2i - cid 0x%x not valid\n", iscsi_cid);
drivers/scsi/bnx2i/bnx2i_hwi.c
2353
printk(KERN_ALERT "iscsi_err - unknown err %x\n",
drivers/scsi/bnx2i/bnx2i_hwi.c
2395
printk(KERN_ALERT "bnx2i_conn_destroy_cmpl: no pending "
drivers/scsi/bnx2i/bnx2i_hwi.c
2401
printk(KERN_ALERT "conn destroy- error hba mismatch\n");
drivers/scsi/bnx2i/bnx2i_hwi.c
2406
printk(KERN_ALERT "conn_destroy_cmpl: op failed\n");
drivers/scsi/bnx2i/bnx2i_hwi.c
2430
printk(KERN_ALERT "ofld_cmpl: no pend offload request\n");
drivers/scsi/bnx2i/bnx2i_hwi.c
2435
printk(KERN_ALERT "ofld_cmpl: error hba mismatch\n");
drivers/scsi/bnx2i/bnx2i_hwi.c
2443
printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - unable "
drivers/scsi/bnx2i/bnx2i_hwi.c
2448
printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - invalid "
drivers/scsi/bnx2i/bnx2i_hwi.c
2455
printk(KERN_ALERT "bnx2i (%s): ofld1 cmpl - invalid "
drivers/scsi/bnx2i/bnx2i_hwi.c
2500
printk(KERN_INFO "bnx2i [%.2x:%.2x.%.2x]: "
drivers/scsi/bnx2i/bnx2i_hwi.c
2515
printk(KERN_ALERT "bnx2i: unknown opcode 0x%x\n",
drivers/scsi/bnx2i/bnx2i_hwi.c
2665
printk(KERN_ALERT "bnx2i: private nl message send error\n");
drivers/scsi/bnx2i/bnx2i_hwi.c
565
printk(KERN_ALERT "NOPOUT: WARNING!! payload len != 0\n");
drivers/scsi/bnx2i/bnx2i_hwi.c
691
printk(KERN_ALERT "ofld_timer: CONN_OFLD timeout\n");
drivers/scsi/bnx2i/bnx2i_hwi.c
694
printk(KERN_ALERT "ofld_timer: CONN_DISCON timeout\n");
drivers/scsi/bnx2i/bnx2i_hwi.c
697
printk(KERN_ALERT "ofld_timer: CONN_CLEANUP timeout\n");
drivers/scsi/bnx2i/bnx2i_init.c
100
printk(KERN_ALERT "bnx2i: unknown device, 0x%x\n",
drivers/scsi/bnx2i/bnx2i_init.c
198
printk(KERN_ALERT "bnx2i: (%s) chip cleanup for %d active "
drivers/scsi/bnx2i/bnx2i_init.c
279
printk(KERN_ALERT "bnx2i: dev %s does not support "
drivers/scsi/bnx2i/bnx2i_init.c
293
printk(KERN_ALERT "bnx2i, duplicate registration"
drivers/scsi/bnx2i/bnx2i_init.c
296
printk(KERN_ERR "bnx2i, driver not registered\n");
drivers/scsi/bnx2i/bnx2i_init.c
298
printk(KERN_ERR "bnx2i, invalid type %d\n", CNIC_ULP_ISCSI);
drivers/scsi/bnx2i/bnx2i_init.c
300
printk(KERN_ERR "bnx2i dev reg, unknown error, %d\n", rc);
drivers/scsi/bnx2i/bnx2i_init.c
324
printk(KERN_ERR "bnx2i init: hba initialization failed\n");
drivers/scsi/bnx2i/bnx2i_init.c
331
printk(KERN_ERR "bnx2i - hba %p init failed\n", hba);
drivers/scsi/bnx2i/bnx2i_init.c
348
printk(KERN_INFO "bnx2i_ulp_exit: hba not "
drivers/scsi/bnx2i/bnx2i_init.c
469
printk(KERN_INFO "%s", version);
drivers/scsi/bnx2i/bnx2i_init.c
477
printk(KERN_ERR "Could not register bnx2i transport.\n");
drivers/scsi/bnx2i/bnx2i_init.c
484
printk(KERN_ERR "Could not register bnx2i cnic driver.\n");
drivers/scsi/bnx2i/bnx2i_iscsi.c
1294
printk(KERN_ERR "bnx2i: missing ep.\n");
drivers/scsi/bnx2i/bnx2i_iscsi.c
1679
printk(KERN_ALERT "bnx2i: no route,"
drivers/scsi/bnx2i/bnx2i_iscsi.c
1688
printk(KERN_ALERT "bnx2i: check route, hba not found\n");
drivers/scsi/bnx2i/bnx2i_iscsi.c
1692
printk(KERN_ALERT "bnx2i: %s network i/f mtu is set to %d\n",
drivers/scsi/bnx2i/bnx2i_iscsi.c
1694
printk(KERN_ALERT "bnx2i: iSCSI HBA can support mtu of %d\n",
drivers/scsi/bnx2i/bnx2i_iscsi.c
1730
printk(KERN_ALERT "bnx2i (%s): - WARN - CONN_DISCON timed out, "
drivers/scsi/bnx2i/bnx2i_iscsi.c
1758
printk(KERN_ALERT "bnx2i - conn destroy failed\n");
drivers/scsi/bnx2i/bnx2i_iscsi.c
1821
printk(KERN_ALERT "bnx2i (%s): alloc_ep - unable to allocate "
drivers/scsi/bnx2i/bnx2i_iscsi.c
1831
printk(KERN_ALERT "bnx2i (%s): ep_conn - alloc QP resc error"
drivers/scsi/bnx2i/bnx2i_iscsi.c
1847
printk(KERN_ALERT "bnx2i (%s): iscsi cid %d is busy\n",
drivers/scsi/bnx2i/bnx2i_iscsi.c
1852
printk(KERN_ALERT "bnx2i (%s): unable to send conn offld kwqe"
drivers/scsi/bnx2i/bnx2i_iscsi.c
1870
printk(KERN_ALERT "bnx2i (%s): iscsi cid %d is busy\n",
drivers/scsi/bnx2i/bnx2i_iscsi.c
2071
printk(KERN_ALERT "bnx2i (%s): WARNING"
drivers/scsi/bnx2i/bnx2i_iscsi.c
2093
printk(KERN_ALERT "bnx2i (%s): close/abort(%d) returned %d\n",
drivers/scsi/bnx2i/bnx2i_iscsi.c
262
printk(KERN_ERR "bnx2i: ERROR - missing conn<->cid table\n");
drivers/scsi/bnx2i/bnx2i_iscsi.c
266
printk(KERN_ERR "bnx2i: wrong cid #%d\n", iscsi_cid);
drivers/scsi/bnx2i/bnx2i_iscsi.c
389
printk(KERN_ERR "bnx2i: Could not allocate ep\n");
drivers/scsi/bnx2i/bnx2i_iscsi.c
532
printk(KERN_ERR "unable to allocate Middle Path BDT\n");
drivers/scsi/bnx2i/bnx2i_iscsi.c
541
printk(KERN_ERR "unable to alloc Middle Path Dummy Buffer\n");
drivers/scsi/bnx2i/bnx2i_iscsi.c
689
printk(KERN_ERR "l5 cid %d not found\n", iscsi_cid);
drivers/scsi/bnx2i/bnx2i_iscsi.c
717
printk(KERN_ERR "l5 cid %d not found\n", iscsi_cid);
drivers/scsi/bnx2i/bnx2i_sysfs.c
135
printk(KERN_ERR "bnx2i: device busy, cannot change CCELL size\n");
drivers/scsi/bnx2i/bnx2i_sysfs.c
84
printk(KERN_ERR "bnx2i: device busy, cannot change SQ size\n");
drivers/scsi/bvme6000_scsi.c
49
printk(KERN_ERR "bvme6000-scsi: "
drivers/scsi/bvme6000_scsi.c
66
printk(KERN_ERR "bvme6000-scsi: No host detected; "
drivers/scsi/bvme6000_scsi.c
75
printk(KERN_ERR "bvme6000-scsi: request_irq failed\n");
drivers/scsi/ch.c
1006
printk(KERN_INFO "SCSI Media Changer driver v" VERSION " \n");
drivers/scsi/ch.c
1012
printk("Unable to get major %d for SCSI-Changer\n",
drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
1391
printk(KERN_INFO "%s", version);
drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
2448
printk(KERN_INFO "%s", version);
drivers/scsi/dc395x.c
2820
printk("G:%p(%02i-%i) ", p,
drivers/scsi/dc395x.c
2840
printk("W:%p<%02i-%i>", p, p->device->id,
drivers/scsi/dc395x.c
3550
printk("ext%s ", !(bval & EXT68HIGH) ? "68" : "50");
drivers/scsi/dc395x.c
3552
printk("int68%s ", !(bval & INT68HIGH) ? "" : "(50)");
drivers/scsi/dc395x.c
3554
printk("int50 ");
drivers/scsi/dc395x.c
3557
printk(" Oops! (All 3?) ");
drivers/scsi/dc395x.c
3559
printk(" Termination: ");
drivers/scsi/dc395x.c
3561
printk("Disabled\n");
drivers/scsi/dc395x.c
3564
printk("Auto ");
drivers/scsi/dc395x.c
3566
printk("Low ");
drivers/scsi/dc395x.c
3568
printk("High ");
drivers/scsi/dc395x.c
3569
printk("\n");
drivers/scsi/device_handler/scsi_dh_alua.c
1309
printk(KERN_ERR "%s: Failed to register scsi device handler",
drivers/scsi/device_handler/scsi_dh_emc.c
533
printk(KERN_ERR "%s: Failed to register scsi device handler.",
drivers/scsi/device_handler/scsi_dh_rdac.c
818
printk(KERN_ERR "Failed to register scsi device handler.");
drivers/scsi/device_handler/scsi_dh_rdac.c
829
printk(KERN_ERR "kmpath_rdacd creation failed.\n");
drivers/scsi/dmx3191d.c
71
printk(KERN_ERR "dmx3191: region 0x%lx-0x%lx already reserved\n",
drivers/scsi/esas2r/esas2r_log.c
164
printk("%s\n", event_buffer);
drivers/scsi/esp_scsi.c
1894
printk("ESP: Sending message [ ");
drivers/scsi/esp_scsi.c
1896
printk("%02x ", esp->msg_out[i]);
drivers/scsi/esp_scsi.c
1897
printk("]\n");
drivers/scsi/esp_scsi.c
869
printk("ESP: tgt[%d] lun[%d] scsi_cmd [ ", tgt, lun);
drivers/scsi/esp_scsi.c
871
printk("%02x ", cmd->cmnd[i]);
drivers/scsi/esp_scsi.c
872
printk("]\n");
drivers/scsi/esp_scsi.c
931
printk("esp%d: tgt[%d] lun[%d] AUTO SENSE[ ",
drivers/scsi/esp_scsi.c
934
printk("%02x ", cmd->sense_buffer[i]);
drivers/scsi/esp_scsi.c
935
printk("]\n");
drivers/scsi/fcoe/fcoe.c
1268
printk(KERN_ERR "fcoe: Failed to attach to the FC transport\n");
drivers/scsi/fcoe/fcoe.c
1622
printk(KERN_WARNING "fcoe: dropping frame with CRC error\n");
drivers/scsi/fcoe/fcoe.c
1667
printk(KERN_WARNING "fcoe: FCoE version "
drivers/scsi/fcoe/fcoe.c
2193
printk(KERN_ERR "fcoe: Failed to create interface (%s)\n",
drivers/scsi/fcoe/fcoe.c
2450
printk(KERN_ERR "failed to register an fcoe transport, check "
drivers/scsi/fcoe/fcoe.c
2639
printk(KERN_ERR "fcoe: Failed to create vport, "
drivers/scsi/fcoe/fcoe.c
2652
printk(KERN_ERR "fcoe: fcoe_vport_create(%s) failed\n",
drivers/scsi/fcoe/fcoe.c
833
printk(KERN_INFO "fcoe: Failed to retrieve FDMI "
drivers/scsi/fcoe/fcoe.c
876
printk(KERN_INFO "fcoe: No FDMI support.\n");
drivers/scsi/fcoe/fcoe.c
965
printk(KERN_ERR "fcoe_em_config: failed to add "
drivers/scsi/fcoe/fcoe.c
975
printk(KERN_ERR "fcoe_em_config: failed to allocate "
drivers/scsi/fcoe/fcoe.c
989
printk(KERN_ERR "fcoe_em_config: failed to "
drivers/scsi/fcoe/fcoe_ctlr.c
1054
printk(KERN_ERR "Failed to allocate sysfs instance "
drivers/scsi/fcoe/fcoe_ctlr.c
337
printk(KERN_NOTICE "libfcoe: host%d: "
drivers/scsi/fcoe/fcoe_ctlr.c
343
printk(KERN_INFO "libfcoe: host%d: FIP selected "
drivers/scsi/fcoe/fcoe_ctlr.c
837
printk(KERN_INFO "libfcoe: host%d: "
drivers/scsi/fcoe/fcoe_sysfs.c
676
printk(KERN_ERR
drivers/scsi/fcoe/fcoe_sysfs.c
698
printk(KERN_ERR
drivers/scsi/fcoe/fcoe_sysfs.c
716
printk(KERN_ERR
drivers/scsi/fcoe/fcoe_sysfs.c
740
printk(KERN_ERR
drivers/scsi/fcoe/fcoe_transport.c
631
printk(KERN_ERR "FCoE transport %s is still attached!\n",
drivers/scsi/fcoe/fcoe_transport.c
645
printk(KERN_ERR "Unable to allocate netdev_mapping");
drivers/scsi/fnic/fnic_main.c
1222
printk(KERN_INFO PFX "%s, ver %s\n", DRV_DESCRIPTION, DRV_VERSION);
drivers/scsi/fnic/fnic_main.c
1227
printk(KERN_ERR PFX "Failed to create fnic directory "
drivers/scsi/fnic/fnic_main.c
1235
printk(KERN_ERR PFX
drivers/scsi/fnic/fnic_main.c
1244
printk(KERN_ERR PFX "FC trace buffer initialization Failed "
drivers/scsi/fnic/fnic_main.c
1256
printk(KERN_ERR PFX "failed to create fnic dflt sgl slab\n");
drivers/scsi/fnic/fnic_main.c
1268
printk(KERN_ERR PFX "failed to create fnic max sgl slab\n");
drivers/scsi/fnic/fnic_main.c
1278
printk(KERN_ERR PFX "failed to create fnic io_req slab\n");
drivers/scsi/fnic/fnic_main.c
1313
printk(KERN_ERR PFX "fnic work queue create failed\n");
drivers/scsi/fnic/fnic_main.c
1321
printk(KERN_ERR PFX "fnic FIP work queue create failed\n");
drivers/scsi/fnic/fnic_main.c
1341
printk(KERN_ERR PFX "fc_attach_transport error\n");
drivers/scsi/fnic/fnic_main.c
1349
printk(KERN_ERR PFX "pci register error\n");
drivers/scsi/fnic/fnic_scsi.c
392
printk(KERN_ERR "DMA mapping failed\n");
drivers/scsi/fnic/fnic_scsi.c
405
printk(KERN_ERR "DMA mapping failed\n");
drivers/scsi/fnic/fnic_trace.c
537
printk(KERN_ERR PFX "Failed to allocate memory "
drivers/scsi/fnic/fnic_trace.c
546
printk(KERN_ERR PFX "Failed to allocate memory for"
drivers/scsi/fnic/fnic_trace.c
590
printk(KERN_INFO PFX "Successfully Freed Trace Buffer\n");
drivers/scsi/fnic/vnic_cq.c
29
printk(KERN_ERR "Failed to hook CQ[%d] resource\n", index);
drivers/scsi/fnic/vnic_dev.c
124
printk(KERN_ERR "vNIC BAR0 resource %d "
drivers/scsi/fnic/vnic_dev.c
220
printk(KERN_ERR
drivers/scsi/fnic/vnic_dev.c
268
printk(KERN_ERR "Busy devcmd %d\n", _CMD_N(cmd));
drivers/scsi/fnic/vnic_dev.c
292
printk(KERN_ERR "Error %d devcmd %d\n",
drivers/scsi/fnic/vnic_dev.c
307
printk(KERN_ERR "Timedout devcmd %d\n", _CMD_N(cmd));
drivers/scsi/fnic/vnic_dev.c
724
printk(KERN_ERR "Can't set packet filter\n");
drivers/scsi/fnic/vnic_dev.c
83
printk(KERN_ERR "vNIC BAR0 res hdr length error\n");
drivers/scsi/fnic/vnic_dev.c
89
printk(KERN_ERR "vNIC BAR0 res hdr not mem-mapped\n");
drivers/scsi/fnic/vnic_dev.c
95
printk(KERN_ERR "vNIC BAR0 res magic/version error "
drivers/scsi/fnic/vnic_intr.c
28
printk(KERN_ERR "Failed to hook INTR[%d].ctrl resource\n",
drivers/scsi/fnic/vnic_rq.c
148
printk(KERN_ERR "Failed to disable RQ[%d]\n", rq->index);
drivers/scsi/fnic/vnic_rq.c
24
printk(KERN_ERR "Failed to alloc rq_bufs\n");
drivers/scsi/fnic/vnic_rq.c
80
printk(KERN_ERR "Failed to hook RQ[%d] resource\n", index);
drivers/scsi/fnic/vnic_wq.c
100
printk(KERN_ERR "Failed to hook WQ[%d] resource\n", index);
drivers/scsi/fnic/vnic_wq.c
205
printk(KERN_ERR "Failed to disable WQ[%d]\n", wq->index);
drivers/scsi/fnic/vnic_wq.c
44
printk(KERN_ERR "Failed to alloc wq_bufs\n");
drivers/scsi/fnic/vnic_wq_copy.c
31
printk(KERN_ERR "Failed to disable Copy WQ[%d],"
drivers/scsi/fnic/vnic_wq_copy.c
75
printk(KERN_ERR "Failed to hook COPY WQ[%d] resource\n", index);
drivers/scsi/g_NCR5380.c
716
printk(KERN_WARNING "Card not found at address 0x%03x\n",
drivers/scsi/hpsa.c
8659
printk(KERN_INFO DRIVER_NAME "\n");
drivers/scsi/hptiop.c
1078
printk(KERN_ERR "scsi%d: reset failed\n", hba->host->host_no);
drivers/scsi/hptiop.c
1095
printk(KERN_WARNING "hptiop_reset(%d/%d/%d)\n",
drivers/scsi/hptiop.c
1287
printk(KERN_ERR "hptiop: fail to enable pci device\n");
drivers/scsi/hptiop.c
1291
printk(KERN_INFO "adapter at PCI %d:%d:%d, IRQ %d\n",
drivers/scsi/hptiop.c
1305
printk(KERN_ERR "hptiop: fail to set dma_mask\n");
drivers/scsi/hptiop.c
1310
printk(KERN_ERR "hptiop: pci_request_regions failed\n");
drivers/scsi/hptiop.c
1316
printk(KERN_ERR "hptiop: fail to alloc scsi host\n");
drivers/scsi/hptiop.c
1345
printk(KERN_ERR "scsi%d: firmware not ready\n",
drivers/scsi/hptiop.c
1352
printk(KERN_ERR "scsi%d: internal_memalloc failed\n",
drivers/scsi/hptiop.c
1359
printk(KERN_ERR "scsi%d: get config failed\n",
drivers/scsi/hptiop.c
1375
printk(KERN_ERR "scsi%d: internal_memalloc failed\n",
drivers/scsi/hptiop.c
1380
printk(KERN_ERR "scsi%d: reset comm failed\n",
drivers/scsi/hptiop.c
1408
printk(KERN_ERR "scsi%d: set config failed\n",
drivers/scsi/hptiop.c
1417
printk(KERN_ERR "scsi%d: request irq %d failed\n",
drivers/scsi/hptiop.c
1435
printk(KERN_ERR "scsi%d: fail to alloc request mem\n",
drivers/scsi/hptiop.c
1461
printk(KERN_ERR "scsi%d: scsi_add_host failed\n",
drivers/scsi/hptiop.c
1511
printk(KERN_ERR "scsi%d: shutdown the iop timeout\n",
drivers/scsi/hptiop.c
1685
printk(KERN_INFO "%s %s\n", driver_name_long, driver_ver);
drivers/scsi/hptiop.c
578
printk(KERN_ERR "scsi%d: fail to start background task\n",
drivers/scsi/hptiop.c
594
printk(KERN_ERR "scsi%d: pci resource invalid\n",
drivers/scsi/hptiop.c
604
printk(KERN_ERR "scsi%d: Fail to ioremap memory space\n",
drivers/scsi/hptiop.h
369
#define dprintk(fmt, args...) do { printk(fmt, ##args); } while(0)
drivers/scsi/ibmvscsi/ibmvfc.c
6571
printk(KERN_INFO IBMVFC_NAME": IBM Virtual Fibre Channel Driver version: %s %s\n",
drivers/scsi/ibmvscsi/ibmvfc.c
6579
printk(KERN_ERR IBMVFC_NAME ": max_sectors must be at least %d.\n",
drivers/scsi/ibmvscsi/ibmvfc.h
945
#define ENTER DBG_CMD(printk(KERN_INFO IBMVFC_NAME": Entering %s\n", __func__))
drivers/scsi/ibmvscsi/ibmvfc.h
946
#define LEAVE DBG_CMD(printk(KERN_INFO IBMVFC_NAME": Leaving %s\n", __func__))
drivers/scsi/ibmvscsi/ibmvscsi.c
570
printk(KERN_ERR "ibmvscsi: found no event struct in pool!\n");
drivers/scsi/imm.c
1039
printk("imm: Found device at ID %i, Attempting to use %s\n",
drivers/scsi/imm.c
1059
printk("imm: Unable to establish communication\n");
drivers/scsi/imm.c
1084
printk
drivers/scsi/imm.c
1089
printk
drivers/scsi/imm.c
1099
printk("imm: No devices found\n");
drivers/scsi/imm.c
1192
printk(KERN_ERR "imm%d: failed to claim parport because "
drivers/scsi/imm.c
140
printk("imm /proc: invalid variable\n");
drivers/scsi/imm.c
155
#define imm_fail(x,y) printk("imm: imm_fail(%i) from %s at line %d\n",\
drivers/scsi/imm.c
219
printk("imm timeout in imm_wait\n");
drivers/scsi/imm.c
264
printk
drivers/scsi/imm.c
299
printk("imm: ECP sync failed as data still present in FIFO.\n");
drivers/scsi/imm.c
365
printk("IMM: returned SCSI status %2x\n", r);
drivers/scsi/imm.c
393
printk("IMM: bug in imm_out()\n");
drivers/scsi/imm.c
444
printk("IMM: bug in imm_ins()\n");
drivers/scsi/imm.c
750
printk("imm: no device at SCSI ID %i\n", cmd->device->id);
drivers/scsi/imm.c
753
printk("imm: BUS BUSY - EPP timeout detected\n");
drivers/scsi/imm.c
756
printk("imm: unknown timeout\n");
drivers/scsi/imm.c
759
printk("imm: told to abort\n");
drivers/scsi/imm.c
762
printk("imm: parity error (???)\n");
drivers/scsi/imm.c
765
printk("imm: internal driver error\n");
drivers/scsi/imm.c
768
printk("imm: told to reset device\n");
drivers/scsi/imm.c
771
printk("imm: bad interrupt (???)\n");
drivers/scsi/imm.c
774
printk("imm: bad return code (%02x)\n",
drivers/scsi/imm.c
923
printk("imm: Invalid scsi phase\n");
drivers/scsi/imm.c
933
printk("IMM: bug in imm_queuecommand\n");
drivers/scsi/initio.c
1004
printk("initio_bad_seg c=%d\n", host->index);
drivers/scsi/initio.c
1296
printk("-s1-");
drivers/scsi/initio.c
1351
printk("-s2-");
drivers/scsi/initio.c
1382
printk("-s3-");
drivers/scsi/initio.c
1447
printk("-s4-");
drivers/scsi/initio.c
1512
printk("-s5-");
drivers/scsi/initio.c
1600
printk("-s6-");
drivers/scsi/initio.c
1645
printk("-s7-");
drivers/scsi/initio.c
2685
printk("bios geometry: head=%d, sec=%d, cyl=%d\n",
drivers/scsi/initio.c
2687
printk("WARNING: check, if the bios geometry is correct.\n");
drivers/scsi/initio.c
2740
printk(KERN_ERR "i91uSCBPost: SRB pointer is empty\n");
drivers/scsi/initio.c
2779
printk("ini9100u: %x %x\n", cblk->hastat, cblk->tastat);
drivers/scsi/initio.c
2823
printk(KERN_WARNING "i91u: Could not set 32 bit DMA mask\n");
drivers/scsi/initio.c
2829
printk(KERN_WARNING "initio: Could not allocate host structure.\n");
drivers/scsi/initio.c
2839
printk(KERN_WARNING "initio: I/O port range 0x%x is busy.\n", host->addr);
drivers/scsi/initio.c
2857
printk(KERN_WARNING "initio: Cannot allocate SCB array.\n");
drivers/scsi/initio.c
2899
printk(KERN_WARNING "initio: Unable to request IRQ %d\n", pdev->irq);
drivers/scsi/initio.c
635
printk("i91u: PCI Base=0x%04X, IRQ=%d, BIOS=0x%04X0, SCSI ID=%d\n",
drivers/scsi/initio.c
640
printk(KERN_INFO "i91u: Reset SCSI Bus ... \n");
drivers/scsi/initio.c
662
printk("find scb at %p\n", scb);
drivers/scsi/initio.c
686
printk("Release SCB %p; ", cmnd);
drivers/scsi/initio.c
707
printk("Append pend SCB %p; ", scbp);
drivers/scsi/initio.c
725
printk("Push pend SCB %p; ", scbp);
drivers/scsi/initio.c
768
printk("unlink pend SCB %p; ", scb);
drivers/scsi/initio.c
794
printk("append busy SCB %p; ", scbp);
drivers/scsi/initio.c
827
printk("Pop busy SCB %p; ", tmp);
drivers/scsi/initio.c
838
printk("unlink busy SCB %p; ", scb);
drivers/scsi/initio.c
880
printk("find busy SCB %p; ", tmp);
drivers/scsi/initio.c
888
printk("append done SCB %p; ", scbp);
drivers/scsi/initio.c
912
printk("find done SCB %p; ",tmp);
drivers/scsi/ipr.h
1715
#define ipr_err(...) printk(KERN_ERR IPR_NAME ": "__VA_ARGS__)
drivers/scsi/ipr.h
1716
#define ipr_info(...) printk(KERN_INFO IPR_NAME ": "__VA_ARGS__)
drivers/scsi/ipr.h
1717
#define ipr_dbg(...) IPR_DBG_CMD(printk(KERN_INFO IPR_NAME ": "__VA_ARGS__))
drivers/scsi/ipr.h
1720
printk(level IPR_NAME ": %d:%d:%d:%d: " fmt, (ioa_cfg)->host->host_no, \
drivers/scsi/ipr.h
1727
printk(level IPR_NAME ": %d:%d:%d:%d: " fmt, (ioa_cfg)->host->host_no, \
drivers/scsi/ipr.h
1748
printk(KERN_ERR IPR_NAME ": %s: " fmt, \
drivers/scsi/ipr.h
1767
#define ENTER IPR_DBG_CMD(printk(KERN_INFO IPR_NAME": Entering %s\n", __func__))
drivers/scsi/ipr.h
1768
#define LEAVE IPR_DBG_CMD(printk(KERN_INFO IPR_NAME": Leaving %s\n", __func__))
drivers/scsi/ips.c
1670
printk(KERN_WARNING "Unable to allocate a flash buffer\n");
drivers/scsi/ips.c
220
#define METHOD_TRACE(s, i) if (ips_debug >= (i+10)) printk(KERN_NOTICE s "\n");
drivers/scsi/ips.c
221
#define DEBUG(i, s) if (ips_debug >= i) printk(KERN_NOTICE s "\n");
drivers/scsi/ips.c
222
#define DEBUG_VAR(i, s, v...) if (ips_debug >= i) printk(KERN_NOTICE s "\n", v);
drivers/scsi/ips.c
659
printk(KERN_WARNING
drivers/scsi/ips.c
6718
printk(KERN_ERR "ips: This driver has only been tested on the x86/ia64/x86_64 platforms\n");
drivers/scsi/ips.c
6910
printk(KERN_WARNING "Unable to set DMA Mask\n");
drivers/scsi/iscsi_tcp.c
1088
printk(KERN_ERR "iscsi_tcp: Invalid max_lun value of %u\n",
drivers/scsi/iscsi_tcp.c
888
printk(KERN_ERR "iscsi_tcp: invalid ep %p.\n", ep);
drivers/scsi/lasi700.c
120
printk(KERN_ERR "lasi700: request_irq failed!\n");
drivers/scsi/libfc/fc_disc.c
438
printk(KERN_WARNING "libfc: Failed to allocate "
drivers/scsi/libfc/fc_fcp.c
2171
printk(KERN_WARNING "libfc: could not allocate scsi_pkt\n");
drivers/scsi/libfc/fc_fcp.c
2253
printk(KERN_ERR "libfc: Leaked SCSI packets when destroying "
drivers/scsi/libfc/fc_fcp.c
2270
printk(KERN_ERR "libfc: Unable to allocate SRB cache, "
drivers/scsi/libfc/fc_fcp.c
540
printk(KERN_WARNING "libfc: CRC error on data "
drivers/scsi/libfc/fc_lport.c
1810
printk(KERN_INFO "host%d: libfc: "
drivers/scsi/libfc/fc_lport.c
245
printk(KERN_WARNING "libfc: Failed to setup lport 0x%x\n",
drivers/scsi/libfc/fc_lport.c
567
printk(KERN_INFO "host%d: libfc: Link up on port (%6.6x)\n",
drivers/scsi/libfc/fc_lport.c
597
printk(KERN_INFO "host%d: libfc: Link down on port (%6.6x)\n",
drivers/scsi/libfc/fc_lport.c
701
printk(KERN_ERR "host%d: libfc: "
drivers/scsi/libfc/fc_lport.c
746
printk(KERN_INFO "host%d: Assigned Port ID %6.6x\n",
drivers/scsi/libfc/fc_lport.c
817
printk(KERN_WARNING "host%d: libfc: Received FLOGI from port "
drivers/scsi/libiscsi.c
2835
printk(KERN_ERR "iscsi: invalid max cmds of %d. Must be a power of two that is at least %d.\n",
drivers/scsi/libiscsi.c
2841
printk(KERN_INFO "iscsi: invalid max cmds of %d. Must be a power of 2 less than or equal to %d. Using %d.\n",
drivers/scsi/libiscsi.c
2850
printk(KERN_ERR "iscsi: invalid max cmds of %d. Must be a power of 2 greater than %d.\n", requested_cmds_max, ISCSI_TOTAL_CMDS_MIN);
drivers/scsi/libiscsi.c
2854
printk(KERN_INFO "iscsi: invalid max cmds %d. Must be a power of 2. Rounding max cmds down to %d.\n",
drivers/scsi/libiscsi.c
2862
printk(KERN_INFO "iscsi: requested max cmds %u is higher than driver limit. Using driver limit %u\n",
drivers/scsi/libiscsi.c
2988
printk(KERN_ERR "Invalid state. Cannot notify host removal "
drivers/scsi/libsas/sas_ata.c
389
r = printk("%s" SAS_FMT "ata%u: %s: %pV",
drivers/scsi/lpfc/lpfc_debugfs.h
374
printk(KERN_ERR "%s\n", line_buf);
drivers/scsi/lpfc/lpfc_debugfs.h
379
printk(KERN_ERR "%s\n", line_buf);
drivers/scsi/lpfc/lpfc_debugfs.h
392
printk(KERN_ERR "%s\n", line_buf);
drivers/scsi/lpfc/lpfc_debugfs.h
422
printk(KERN_ERR "\n");
drivers/scsi/lpfc/lpfc_debugfs.h
556
printk(KERN_ERR "DAT RQ: RQ[Qid:%d]\n",
drivers/scsi/lpfc/lpfc_debugfs.h
570
printk(KERN_ERR "HDR RQ: RQ[Qid:%d]\n",
drivers/scsi/lpfc/lpfc_debugfs.h
621
printk(KERN_ERR "MBX WQ[Qid:%d]\n", qid);
drivers/scsi/lpfc/lpfc_debugfs.h
638
printk(KERN_ERR "HDR RQ[Qid:%d]\n", qid);
drivers/scsi/lpfc/lpfc_debugfs.h
643
printk(KERN_ERR "DAT RQ[Qid:%d]\n", qid);
drivers/scsi/lpfc/lpfc_debugfs.h
707
printk(KERN_ERR "FCP EQ[Idx:%d|Qid:%d]\n", eq_idx, qid);
drivers/scsi/lpfc/lpfc_init.c
14393
printk(KERN_ERR "lpfc: Cannot re-enable "
drivers/scsi/lpfc/lpfc_init.c
15236
printk(KERN_ERR "lpfc: Cannot re-enable "
drivers/scsi/lpfc/lpfc_init.c
15669
printk(KERN_ERR "Could not register lpfcmgmt device, "
drivers/scsi/lpfc/lpfc_init.c
8665
printk(KERN_ERR "%s: only allocated %d iocbs of "
drivers/scsi/lpfc/lpfc_init.c
8674
printk(KERN_ERR "%s: failed to allocate IOTAG. "
drivers/scsi/lpfc/lpfc_sli.c
11766
printk(KERN_ERR "%d:0462 Too many cmd / rsp ring entries in "
drivers/scsi/lpfc/lpfc_sli.c
12685
printk(KERN_ERR "%s: Unknown context cmd type, value %d\n",
drivers/scsi/lpfc/lpfc_sli.c
1646
printk("%s - Unhandled SLI-3 Command x%x\n",
drivers/scsi/lpfc/lpfc_sli.c
4432
printk(KERN_ERR "%s: out of buffers! Failing "
drivers/scsi/mac53c94.c
210
printk(KERN_DEBUG "mac53c94_intr, intr=%x stat=%x seq=%x phase=%d\n",
drivers/scsi/mac53c94.c
216
printk(KERN_INFO "external SCSI bus reset detected\n");
drivers/scsi/mac53c94.c
223
printk(KERN_ERR "53c94: invalid cmd, intr=%x stat=%x seq=%x phase=%d\n",
drivers/scsi/mac53c94.c
231
printk("53c94: bad error, intr=%x stat=%x seq=%x phase=%d\n",
drivers/scsi/mac53c94.c
238
printk(KERN_DEBUG "53c94: interrupt with no command active?\n");
drivers/scsi/mac53c94.c
242
printk(KERN_ERR "mac53c94: parity error\n");
drivers/scsi/mac53c94.c
254
printk(KERN_DEBUG "got intr %x during selection\n", intr);
drivers/scsi/mac53c94.c
259
printk(KERN_DEBUG "seq step %x after command\n", seq);
drivers/scsi/mac53c94.c
284
printk(KERN_DEBUG "in unexpected phase %x after cmd\n",
drivers/scsi/mac53c94.c
293
printk(KERN_DEBUG "got intr %x before status\n", intr);
drivers/scsi/mac53c94.c
311
printk(KERN_DEBUG "intr %x before data xfer complete\n", intr);
drivers/scsi/mac53c94.c
321
printk(KERN_DEBUG "got intr %x on completion\n", intr);
drivers/scsi/mac53c94.c
332
printk(KERN_DEBUG "got intr %x when expected disconnect\n", intr);
drivers/scsi/mac53c94.c
337
printk(KERN_DEBUG "don't know about phase %d\n", state->phase);
drivers/scsi/mac53c94.c
418
printk(KERN_ERR "mac53c94: expected 2 addrs and intrs"
drivers/scsi/mac53c94.c
425
printk(KERN_ERR "mac53c94: unable to request memory resources");
drivers/scsi/mac53c94.c
431
printk(KERN_ERR "mac53c94: couldn't register host");
drivers/scsi/mac53c94.c
449
printk(KERN_ERR "mac53c94: ioremap failed for %pOF\n", node);
drivers/scsi/mac53c94.c
455
printk(KERN_ERR "%pOF: can't get clock frequency, "
drivers/scsi/mac53c94.c
468
printk(KERN_ERR "mac53c94: couldn't allocate dma "
drivers/scsi/mac53c94.c
482
printk(KERN_ERR "mac53C94: can't get irq %d for %pOF\n",
drivers/scsi/mac53c94.c
76
printk(KERN_DEBUG "mac53c94_queue %p: command is", cmd);
drivers/scsi/mac53c94.c
78
printk(KERN_CONT " %.2x", cmd->cmnd[i]);
drivers/scsi/mac53c94.c
79
printk(KERN_CONT "\n");
drivers/scsi/mac53c94.c
80
printk(KERN_DEBUG "use_sg=%d request_bufflen=%d request_buffer=%p\n",
drivers/scsi/mac_esp.c
107
printk(KERN_ERR PFX "FIFO is not empty (sreg %02x)\n",
drivers/scsi/mac_esp.c
133
printk(KERN_ERR PFX "PDMA timeout (sreg %02x)\n",
drivers/scsi/mac_esp.c
363
printk(KERN_INFO PFX "using PIO for controller %d\n", dev->id);
drivers/scsi/mac_esp.c
369
printk(KERN_INFO PFX "using PDMA for controller %d\n", dev->id);
drivers/scsi/megaraid.c
4585
printk(KERN_WARNING
drivers/scsi/megaraid.c
4605
printk(KERN_WARNING
drivers/scsi/megaraid/mega_common.h
258
#define ASSERT_ACTION printk
drivers/scsi/megaraid/megaraid_ioctl.h
39
#define con_log(level, fmt) if (LSI_DBGLVL >= level) printk fmt;
drivers/scsi/megaraid/megaraid_sas_base.c
2975
printk(KERN_CONT "\n");
drivers/scsi/megaraid/megaraid_sas_base.c
2976
printk(KERN_CONT "%08x: ", (i * 4));
drivers/scsi/megaraid/megaraid_sas_base.c
2978
printk(KERN_CONT "%08x ", le32_to_cpu(buf_loc[i]));
drivers/scsi/megaraid/megaraid_sas_base.c
2980
printk(KERN_CONT "\n");
drivers/scsi/megaraid/megaraid_sas_base.c
2994
printk("%08x: %08x\n", (i * 4), readl(®[i]));
drivers/scsi/megaraid/megaraid_sas_base.c
3025
printk(KERN_INFO "IO request frame:\n");
drivers/scsi/megaraid/megaraid_sas_base.c
3028
printk(KERN_INFO "Chain frame:\n");
drivers/scsi/megaraid/megaraid_sas_base.c
429
printk(KERN_WARNING "megaraid_sas: provided event log level is out of range, setting it to default 2(CLASS_CRITICAL), permissible range is: -2 to 4\n");
drivers/scsi/megaraid/megaraid_sas_base.c
8168
printk(KERN_DEBUG "megasas: fasync_helper failed [%d]\n", rc);
drivers/scsi/megaraid/megaraid_sas_base.c
8586
printk(KERN_DEBUG "megasas: fasync_helper was not "
drivers/scsi/megaraid/megaraid_sas_base.c
8723
printk(KERN_ERR "megasas: could not set dbg_lvl\n");
drivers/scsi/megaraid/megaraid_sas_base.c
8893
printk(KERN_ERR "invalid instance!\n");
drivers/scsi/megaraid/megaraid_sas_base.c
9033
printk(KERN_DEBUG "megasas: failed to open device node\n");
drivers/scsi/megaraid/megaraid_sas_base.c
9047
printk(KERN_DEBUG "megasas: PCI hotplug registration failed \n");
drivers/scsi/megaraid/megaraid_sas_fp.c
76
printk(KERN_ERR "megasas : DIVISOR is zero, in div fn\n");
drivers/scsi/megaraid/megaraid_sas_fp.c
94
printk(KERN_ERR "megasas : DIVISOR is zero in mod fn\n");
drivers/scsi/mesh.c
1037
printk(KERN_INFO "mesh: SCSI bus reset detected: "
drivers/scsi/mesh.c
1041
printk("done\n");
drivers/scsi/mesh.c
1055
printk(KERN_WARNING "mesh: target %d aborted\n",
drivers/scsi/mesh.c
1067
printk(KERN_ERR "mesh: msg parity error, target %d\n",
drivers/scsi/mesh.c
1076
printk(KERN_ERR "mesh: parity error, target %d\n",
drivers/scsi/mesh.c
1104
printk(KERN_ERR "mesh: sequence error (err=%x exc=%x)\n",
drivers/scsi/mesh.c
1107
printk(KERN_ERR "mesh: unknown error %x (exc=%x)\n", err, exc);
drivers/scsi/mesh.c
1133
printk(KERN_DEBUG "mesh: lost arbitration\n");
drivers/scsi/mesh.c
1145
printk(KERN_ERR "mesh: can't cope with exception %x\n", exc);
drivers/scsi/mesh.c
1163
printk(KERN_DEBUG "got %d message bytes:", ms->n_msgin);
drivers/scsi/mesh.c
1165
printk(" %x", ms->msgin[i]);
drivers/scsi/mesh.c
1166
printk("\n");
drivers/scsi/mesh.c
1229
printk(KERN_WARNING "mesh: lun mismatch "
drivers/scsi/mesh.c
1241
printk(KERN_WARNING "mesh: rejecting message from target %d:",
drivers/scsi/mesh.c
1244
printk(" %x", ms->msgin[i]);
drivers/scsi/mesh.c
1245
printk("\n");
drivers/scsi/mesh.c
1342
printk(KERN_ERR "mesh: halt_dma: data_ptr=%d (nb=%d, ms=%p)\n",
drivers/scsi/mesh.c
1351
printk(KERN_DEBUG "mesh: target %d overrun, "
drivers/scsi/mesh.c
1421
printk(KERN_DEBUG
drivers/scsi/mesh.c
1431
printk(KERN_DEBUG "mesh: unknown scsi phase %x\n", phase);
drivers/scsi/mesh.c
1503
printk(KERN_ERR "mesh: error %x in msg_out\n",
drivers/scsi/mesh.c
1509
printk(KERN_ERR "mesh: exc %x in msg_out\n",
drivers/scsi/mesh.c
1512
printk(KERN_DEBUG "mesh: bs0=%x in msg_out\n",
drivers/scsi/mesh.c
1539
printk(KERN_ERR "mesh: interrupt in idle phase?\n");
drivers/scsi/mesh.c
1601
printk(KERN_DEBUG "mesh: status is %x\n",
drivers/scsi/mesh.c
1662
printk(KERN_DEBUG "mesh_intr, bs0=%x int=%x exc=%x err=%x "
drivers/scsi/mesh.c
1689
printk(KERN_DEBUG "mesh_abort(%p)\n", cmd);
drivers/scsi/mesh.c
1709
printk(KERN_DEBUG "mesh_host_reset\n");
drivers/scsi/mesh.c
1820
printk(KERN_INFO "resetting MESH scsi bus(es)\n");
drivers/scsi/mesh.c
1870
printk(KERN_ERR "mesh: expected 2 addrs and 2 intrs"
drivers/scsi/mesh.c
1877
printk(KERN_ERR "mesh: unable to request memory resources");
drivers/scsi/mesh.c
1882
printk(KERN_ERR "mesh: couldn't register host");
drivers/scsi/mesh.c
1896
printk(KERN_ERR "mesh: can't map registers\n");
drivers/scsi/mesh.c
1901
printk(KERN_ERR "mesh: can't map registers\n");
drivers/scsi/mesh.c
1921
printk(KERN_ERR "mesh: can't allocate DMA table\n");
drivers/scsi/mesh.c
1939
printk(KERN_INFO "mesh: assuming 50MHz clock frequency\n");
drivers/scsi/mesh.c
1958
printk(KERN_ERR "MESH: can't get irq %d\n", ms->meshintr);
drivers/scsi/mesh.c
2056
printk(KERN_INFO "mesh: configured for synchronous %d MB/s\n", sync_rate);
drivers/scsi/mesh.c
2060
printk(KERN_INFO "mesh: configured for asynchronous\n");
drivers/scsi/mesh.c
252
printk(KERN_DEBUG "mesh log %d: bs=%.2x%.2x ph=%.2x ",
drivers/scsi/mesh.c
255
printk("tb=%10u ", lp->tb);
drivers/scsi/mesh.c
257
printk(lp->fmt, lp->d);
drivers/scsi/mesh.c
258
printk("\n");
drivers/scsi/mesh.c
277
printk(KERN_DEBUG "mesh log: bs=%.2x%.2x ph=%.2x t%d ",
drivers/scsi/mesh.c
280
printk("tb=%10u ", lp->tb);
drivers/scsi/mesh.c
282
printk(lp->fmt, lp->d);
drivers/scsi/mesh.c
283
printk("\n");
drivers/scsi/mesh.c
310
printk(KERN_DEBUG "mesh: state at %p, regs at %p, dma at %p\n",
drivers/scsi/mesh.c
312
printk(KERN_DEBUG " ct=%4x seq=%2x bs=%4x fc=%2x "
drivers/scsi/mesh.c
319
printk(KERN_DEBUG " fifo data=%.2x\n",in_8(&mr->fifo));
drivers/scsi/mesh.c
320
printk(KERN_DEBUG " dma stat=%x cmdptr=%x\n",
drivers/scsi/mesh.c
322
printk(KERN_DEBUG " phase=%d msgphase=%d conn_tgt=%d data_ptr=%d\n",
drivers/scsi/mesh.c
324
printk(KERN_DEBUG " dma_st=%d dma_ct=%d n_msgout=%d\n",
drivers/scsi/mesh.c
330
printk(KERN_DEBUG " target %d: req=%p goes_out=%d saved_ptr=%d\n",
drivers/scsi/mesh.c
370
printk(KERN_INFO "mesh: performing initial bus reset...\n");
drivers/scsi/mesh.c
409
printk(KERN_DEBUG "mesh_start: %p tgt=%d cmd=", cmd, id);
drivers/scsi/mesh.c
411
printk(" %x", cmd->cmnd[i]);
drivers/scsi/mesh.c
412
printk(" use_sg=%d buffer=%p bufflen=%u\n",
drivers/scsi/mesh.c
532
printk(KERN_ERR "mesh: controller not responding"
drivers/scsi/mesh.c
554
printk(KERN_ERR "inappropriate mesh_start (phase=%d, ms=%p)",
drivers/scsi/mesh.c
596
printk(KERN_DEBUG "mesh_done: result = %x, data_ptr=%d, buflen=%d\n",
drivers/scsi/mesh.c
603
printk(KERN_DEBUG "buffer = %x %x %x %x %x %x %x %x\n",
drivers/scsi/mesh.c
642
printk(KERN_INFO "mesh: target %d now asynchronous\n",
drivers/scsi/mesh.c
669
printk(KERN_INFO "mesh: target %d synchronous at %d.%d MB/s\n",
drivers/scsi/mesh.c
703
printk(KERN_ERR "mesh: msg_out but n_msgout=%d\n",
drivers/scsi/mesh.c
710
printk(KERN_DEBUG "mesh: sending %d msg bytes:",
drivers/scsi/mesh.c
713
printk(" %x", ms->msgout[i]);
drivers/scsi/mesh.c
714
printk("\n");
drivers/scsi/mesh.c
753
printk(KERN_ERR "mesh bug: start_phase msgphase=%d\n",
drivers/scsi/mesh.c
811
printk(KERN_ERR "mesh: start_phase called with phase=%d\n",
drivers/scsi/mesh.c
878
printk(KERN_ERR "mesh: reselected in phase %d/%d tgt %d\n",
drivers/scsi/mesh.c
885
printk(KERN_ERR "mesh: reselected with DMA started !\n");
drivers/scsi/mesh.c
922
printk(KERN_ERR "mesh: reselection but nothing in fifo?\n");
drivers/scsi/mesh.c
935
printk(KERN_ERR "mesh: bad reselection data %x\n", b);
drivers/scsi/mesh.c
948
printk(KERN_DEBUG "mesh: reselected by target %d\n", t);
drivers/scsi/mesh.c
949
printk(KERN_DEBUG "mesh: saved_ptr=%x goes_out=%d cmd=%p\n",
drivers/scsi/mesh.c
954
printk(KERN_ERR "mesh: reselected by tgt %d but no cmd!\n", t);
drivers/scsi/mvme16x_scsi.c
47
printk(KERN_INFO "mvme16x-scsi: detection disabled, "
drivers/scsi/mvme16x_scsi.c
54
printk(KERN_ERR "mvme16x-scsi: "
drivers/scsi/mvme16x_scsi.c
71
printk(KERN_ERR "mvme16x-scsi: No host detected; "
drivers/scsi/mvme16x_scsi.c
79
printk(KERN_ERR "mvme16x-scsi: request_irq failed\n");
drivers/scsi/mvsas/mv_64xx.c
131
printk(KERN_DEBUG "check SRS 0 %08X.\n", tmp);
drivers/scsi/mvsas/mv_64xx.c
137
printk(KERN_DEBUG "register set 0x%x was stopped.\n",
drivers/scsi/mvsas/mv_init.c
267
printk(KERN_DEBUG "failed to create dma pool %s.\n", pool_name);
drivers/scsi/mvsas/mv_sas.h
38
printk(KERN_DEBUG "%s: " fmt, __func__, ## arg)
drivers/scsi/mvumi.c
1362
printk(KERN_WARNING "Event param(len 0x%x): ",
drivers/scsi/mvumi.c
1365
printk(KERN_WARNING "0x%x ", ptr->params[i]);
drivers/scsi/mvumi.c
1367
printk(KERN_WARNING "\n");
drivers/scsi/mvumi.c
1371
printk(KERN_WARNING "Event sense data(len 0x%x): ",
drivers/scsi/mvumi.c
1374
printk(KERN_WARNING "0x%x ", ptr->sense_data[i]);
drivers/scsi/mvumi.c
1375
printk(KERN_WARNING "\n");
drivers/scsi/ncr53c8xx.c
265
printk("___m_alloc(%d) = %p\n", size, (void *) a);
drivers/scsi/ncr53c8xx.c
279
printk("___m_free(%p, %d)\n", ptr, size);
drivers/scsi/ncr53c8xx.c
325
printk ("new %-10s[%4d] @%p.\n", name, size, p);
drivers/scsi/ncr53c8xx.c
330
printk (NAME53C8XX ": failed to allocate %s[%d]\n", name, size);
drivers/scsi/ncr53c8xx.c
340
printk ("freeing %-10s[%4d] @%p.\n", name, size, ptr);
drivers/scsi/ncr53c8xx.c
3507
printk (KERN_ERR "%s: ERROR0 IN SCRIPT at %d.\n",
drivers/scsi/ncr53c8xx.c
3513
printk (KERN_DEBUG "%p: <%x>\n",
drivers/scsi/ncr53c8xx.c
3537
printk (KERN_ERR"%s: ERROR1 IN SCRIPT at %d.\n",
drivers/scsi/ncr53c8xx.c
3644
printk("\n");
drivers/scsi/ncr53c8xx.c
3949
printk(KERN_INFO "%s: ID %d, Fast-%d%s%s\n", ncr_name(np),
drivers/scsi/ncr53c8xx.c
3956
printk (KERN_INFO "%s: initial SCNTL3/DMODE/DCNTL/CTEST3/4/5 = "
drivers/scsi/ncr53c8xx.c
3961
printk (KERN_INFO "%s: final SCNTL3/DMODE/DCNTL/CTEST3/4/5 = "
drivers/scsi/ncr53c8xx.c
3968
printk (KERN_INFO "%s: on-chip RAM at 0x%lx\n",
drivers/scsi/ncr53c8xx.c
4428
printk ("%s: queuepos=%d.\n", ncr_name (np), np->squeueput);
drivers/scsi/ncr53c8xx.c
4447
printk("%s: resetting, "
drivers/scsi/ncr53c8xx.c
4483
printk("%s: suspicious SCSI data while resetting the BUS.\n",
drivers/scsi/ncr53c8xx.c
4485
printk("%s: %sdp0,d7-0,rst,req,ack,bsy,sel,atn,msg,c/d,i/o = "
drivers/scsi/ncr53c8xx.c
4560
printk("%s: releasing host resources\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
4568
printk("%s: stopping the timer\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
4574
printk("%s: the timer seems to be already stopped\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
4582
printk("%s: disabling chip interrupts\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
4592
printk("%s: resetting chip\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
4613
printk("%s: shall free an active ccb (host_status=%d)\n",
drivers/scsi/ncr53c8xx.c
4617
printk("%s: freeing ccb (%lx)\n", ncr_name(np), (u_long) cp);
drivers/scsi/ncr53c8xx.c
4630
printk("%s: freeing lp (%lx)\n", ncr_name(np), (u_long) lp);
drivers/scsi/ncr53c8xx.c
4647
printk("%s: host resources successfully released\n", inst_name);
drivers/scsi/ncr53c8xx.c
4678
printk ("CCB=%lx STAT=%x/%x\n", (unsigned long)cp,
drivers/scsi/ncr53c8xx.c
4819
for (i=0; i<14; i++) printk (" %x", *p++);
drivers/scsi/ncr53c8xx.c
4820
printk (".\n");
drivers/scsi/ncr53c8xx.c
4884
for (i=0; i<cmd->cmd_len; i++) printk (" %x", *p++);
drivers/scsi/ncr53c8xx.c
4889
printk (" GOOD");
drivers/scsi/ncr53c8xx.c
4892
printk (" SENSE:");
drivers/scsi/ncr53c8xx.c
4895
printk (" %x", *p++);
drivers/scsi/ncr53c8xx.c
4898
printk (" STAT: %x\n", cp->scsi_status);
drivers/scsi/ncr53c8xx.c
4901
} else printk (" HOSTERROR: %x", cp->host_status);
drivers/scsi/ncr53c8xx.c
4902
printk ("\n");
drivers/scsi/ncr53c8xx.c
5076
if (msg) printk (KERN_INFO "%s: restart (%s).\n", ncr_name (np), msg);
drivers/scsi/ncr53c8xx.c
5201
printk ("%s: Downloading SCSI SCRIPTS.\n",
drivers/scsi/ncr53c8xx.c
5585
printk("%s: command processing resumed\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
5611
if (DEBUG_FLAGS & DEBUG_TINY) printk ("{");
drivers/scsi/ncr53c8xx.c
5613
if (DEBUG_FLAGS & DEBUG_TINY) printk ("}");
drivers/scsi/ncr53c8xx.c
5678
printk ("%s:%d: ERROR (%x:%x) (%x-%x-%x) (%x/%x) @ (%s %x:%08x).\n",
drivers/scsi/ncr53c8xx.c
5686
printk ("%s: script cmd = %08x\n", ncr_name(np),
drivers/scsi/ncr53c8xx.c
5690
printk ("%s: regdump:", ncr_name(np));
drivers/scsi/ncr53c8xx.c
5692
printk (" %02x", (unsigned)INB_OFF(i));
drivers/scsi/ncr53c8xx.c
5693
printk (".\n");
drivers/scsi/ncr53c8xx.c
5745
if (DEBUG_FLAGS & DEBUG_TINY) printk ("F ");
drivers/scsi/ncr53c8xx.c
5764
printk ("<%d|%x:%x|%x:%x>",
drivers/scsi/ncr53c8xx.c
5801
printk( "%s: unknown interrupt(s) ignored, "
drivers/scsi/ncr53c8xx.c
5864
printk ("%s: have to clear fifos.\n", ncr_name (np));
drivers/scsi/ncr53c8xx.c
5875
printk ("%s: handshake timeout\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
5881
printk ("%s: unexpected disconnect\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
5892
printk ("%s: unknown interrupt\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
5915
if (DEBUG_FLAGS & DEBUG_TINY) printk ("T");
drivers/scsi/ncr53c8xx.c
5961
printk("%s: SCSI bus mode change from %x to %x.\n",
drivers/scsi/ncr53c8xx.c
5997
printk("%s: SCSI parity error detected: SCR1=%d DBC=%x SSTAT1=%x\n",
drivers/scsi/ncr53c8xx.c
6123
printk ("P%x%x RL=%d D=%d SS0=%x ", cmd&7, sbcl&7,
drivers/scsi/ncr53c8xx.c
6128
printk ("P%x%x RL=%d ", cmd&7, sbcl&7, rest);
drivers/scsi/ncr53c8xx.c
6185
printk ("\nCP=%p CP2=%p DSP=%x NXT=%x VDSP=%p CMD=%x ",
drivers/scsi/ncr53c8xx.c
6198
printk ("%s: SCSI phase error fixup: "
drivers/scsi/ncr53c8xx.c
6220
printk ("OCMD=%x\nTBLP=%p OLEN=%x OADR=%x\n",
drivers/scsi/ncr53c8xx.c
6245
printk ("%s: SCSI phase error fixup: "
drivers/scsi/ncr53c8xx.c
6528
if (DEBUG_FLAGS & DEBUG_TINY) printk ("I#%d", num);
drivers/scsi/ncr53c8xx.c
6559
printk ("%s:%d: SIR %d, "
drivers/scsi/ncr53c8xx.c
6564
printk ("%s:%d: SIR %d, "
drivers/scsi/ncr53c8xx.c
7532
printk ("CACHE TEST FAILED: reg dstat-sstat2 readback %x.\n",
drivers/scsi/ncr53c8xx.c
7586
printk ("CACHE TEST FAILED: timeout.\n");
drivers/scsi/ncr53c8xx.c
7593
printk ("CACHE TEST FAILED: script execution failed.\n");
drivers/scsi/ncr53c8xx.c
7594
printk ("start=%08lx, pc=%08lx, end=%08lx\n",
drivers/scsi/ncr53c8xx.c
7603
printk ("CACHE TEST FAILED: host wrote %d, ncr read %d.\n",
drivers/scsi/ncr53c8xx.c
7608
printk ("CACHE TEST FAILED: ncr wrote %d, host read %d.\n",
drivers/scsi/ncr53c8xx.c
7613
printk ("CACHE TEST FAILED: ncr wrote %d, read back %d.\n",
drivers/scsi/ncr53c8xx.c
7654
printk ("%s: enabling clock multiplier\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
7662
printk("%s: the chip cannot lock the frequency\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
767
printk("sym53c8xx_setup: unexpected boot option '%.*s' ignored\n", (int)(pc-cur+1), cur);
drivers/scsi/ncr53c8xx.c
7716
printk ("%s: Delay (GEN=%d): %u msec\n", ncr_name(np), gen, ms);
drivers/scsi/ncr53c8xx.c
7740
printk ("%s: clock multiplier found\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
7759
printk ("%s: NCR clock is %uKHz, %uKHz\n", ncr_name(np), f1, f2);
drivers/scsi/ncr53c8xx.c
7769
printk ("%s: clock multiplier assumed\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
7845
printk("ncr53c8xx_select_queue_depth: host=%d, id=%d, lun=%d, depth=%d\n",
drivers/scsi/ncr53c8xx.c
7864
printk("ncr53c8xx_queue_command\n");
drivers/scsi/ncr53c8xx.c
7876
printk("ncr53c8xx : command not queued - result=%d\n", sts);
drivers/scsi/ncr53c8xx.c
7881
printk("ncr53c8xx : command successfully queued\n");
drivers/scsi/ncr53c8xx.c
7906
printk("ncr53c8xx : interrupt received\n");
drivers/scsi/ncr53c8xx.c
7909
if (DEBUG_FLAGS & DEBUG_TINY) printk ("[");
drivers/scsi/ncr53c8xx.c
7917
if (DEBUG_FLAGS & DEBUG_TINY) printk ("]\n");
drivers/scsi/ncr53c8xx.c
7987
printk("%s: cmd %lx inserted into waiting list\n", ncr_name(np), (u_long) cmd);
drivers/scsi/ncr53c8xx.c
8006
if (waiting_list) printk("%s: waiting_list=%lx processing sts=%d\n", ncr_name(np), (u_long) waiting_list, sts);
drivers/scsi/ncr53c8xx.c
8013
printk("%s: cmd %lx trying to requeue\n", ncr_name(np), (u_long) wcmd);
drivers/scsi/ncr53c8xx.c
8019
printk("%s: cmd %lx done forced sts=%d\n", ncr_name(np), (u_long) wcmd, sts);
drivers/scsi/ncr53c8xx.c
8108
printk(KERN_INFO "ncr53c720-%d: rev 0x%x irq %d\n",
drivers/scsi/ncr53c8xx.c
8160
printk(KERN_ERR
drivers/scsi/ncr53c8xx.c
8165
printk(KERN_INFO
drivers/scsi/ncr53c8xx.c
8180
printk(KERN_WARNING "%s: script too large, NOT using on chip RAM.\n",
drivers/scsi/ncr53c8xx.c
8240
printk(KERN_ERR "CACHE INCORRECTLY CONFIGURED.\n");
drivers/scsi/ncr53c8xx.c
8258
printk(KERN_ERR "%s: FATAL ERROR: CHECK SCSI BUS - CABLES, TERMINATION, DEVICE POWER etc.!\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
8272
printk(KERN_INFO "%s: waiting %d seconds for scsi devices to settle...\n",
drivers/scsi/ncr53c8xx.c
8293
printk(KERN_INFO "%s: detaching...\n", ncr_name(np));
drivers/scsi/ncr53c8xx.c
8316
printk("ncr53c8xx: release\n");
drivers/scsi/nsp32.c
1269
printk( "auto+fifo\n");
drivers/scsi/nsp32.c
330
printk("%snsp32: %s\n", type, buf);
drivers/scsi/nsp32.c
332
printk("%snsp32: %s (%d): %s\n", type, func, line, buf);
drivers/scsi/nsp32.c
347
printk("nsp32-debug: 0x%x %s (%d): %s\n", mask, func, line, buf);
drivers/scsi/nsp32_debug.c
100
printk("%02x ", command[i]);
drivers/scsi/nsp32_debug.c
105
printk("LBA=%d len=%d",
drivers/scsi/nsp32_debug.c
113
printk("LBA=%d len=%d",
drivers/scsi/nsp32_debug.c
123
printk("LBA=%d len=%d",
drivers/scsi/nsp32_debug.c
137
printk("\n");
drivers/scsi/nsp32_debug.c
149
printk( "BUSPHASE_COMMAND\n");
drivers/scsi/nsp32_debug.c
152
printk( "BUSPHASE_MESSAGE_IN\n");
drivers/scsi/nsp32_debug.c
155
printk( "BUSPHASE_MESSAGE_OUT\n");
drivers/scsi/nsp32_debug.c
158
printk( "BUSPHASE_DATA_IN\n");
drivers/scsi/nsp32_debug.c
161
printk( "BUSPHASE_DATA_OUT\n");
drivers/scsi/nsp32_debug.c
164
printk( "BUSPHASE_STATUS\n");
drivers/scsi/nsp32_debug.c
167
printk( "BUSPHASE_SELECT\n");
drivers/scsi/nsp32_debug.c
170
printk( "BUSPHASE_other: 0x%x\n", stat);
drivers/scsi/nsp32_debug.c
177
printk("auto: 0x%x,", i);
drivers/scsi/nsp32_debug.c
180
printk(" cmd");
drivers/scsi/nsp32_debug.c
183
printk(" din");
drivers/scsi/nsp32_debug.c
186
printk(" dout");
drivers/scsi/nsp32_debug.c
189
printk(" mout");
drivers/scsi/nsp32_debug.c
192
printk(" stat");
drivers/scsi/nsp32_debug.c
195
printk(" ill");
drivers/scsi/nsp32_debug.c
198
printk(" bfree-o");
drivers/scsi/nsp32_debug.c
201
printk(" min-o");
drivers/scsi/nsp32_debug.c
204
printk(" mout-o");
drivers/scsi/nsp32_debug.c
207
printk(" sel");
drivers/scsi/nsp32_debug.c
210
printk(" m0");
drivers/scsi/nsp32_debug.c
213
printk(" m2");
drivers/scsi/nsp32_debug.c
216
printk(" m3");
drivers/scsi/nsp32_debug.c
219
printk(" m4");
drivers/scsi/nsp32_debug.c
222
printk(" busy");
drivers/scsi/nsp32_debug.c
225
printk("\n");
drivers/scsi/nsp32_debug.c
233
printk("Phase=0x%x, ", nsp32_read1(base, SCSI_BUS_MONITOR));
drivers/scsi/nsp32_debug.c
234
printk("OldPhase=0x%x, ", nsp32_index_read1(base, OLD_SCSI_PHASE));
drivers/scsi/nsp32_debug.c
235
printk("syncreg=0x%x, ", nsp32_read1(base, SYNC_REG));
drivers/scsi/nsp32_debug.c
236
printk("ackwidth=0x%x, ", nsp32_read1(base, ACK_WIDTH));
drivers/scsi/nsp32_debug.c
237
printk("sgtpaddr=0x%lx, ", nsp32_read4(base, SGT_ADR));
drivers/scsi/nsp32_debug.c
238
printk("scsioutlatch=0x%x, ", nsp32_read1(base, SCSI_OUT_LATCH_TARGET_ID));
drivers/scsi/nsp32_debug.c
239
printk("msgout=0x%lx, ", nsp32_read4(base, SCSI_MSG_OUT));
drivers/scsi/nsp32_debug.c
240
printk("miscrd=0x%x, ", nsp32_index_read2(base, MISC_WR));
drivers/scsi/nsp32_debug.c
241
printk("seltimeout=0x%x, ", nsp32_read2(base, SEL_TIME_OUT));
drivers/scsi/nsp32_debug.c
242
printk("sreqrate=0x%x, ", nsp32_read1(base, SREQ_SMPL_RATE));
drivers/scsi/nsp32_debug.c
243
printk("transStatus=0x%x, ", nsp32_read2(base, TRANSFER_STATUS));
drivers/scsi/nsp32_debug.c
244
printk("reselectid=0x%x, ", nsp32_read2(base, COMMAND_CONTROL));
drivers/scsi/nsp32_debug.c
245
printk("arbit=0x%x, ", nsp32_read1(base, ARBIT_STATUS));
drivers/scsi/nsp32_debug.c
246
printk("BmStart=0x%lx, ", nsp32_read4(base, BM_START_ADR));
drivers/scsi/nsp32_debug.c
247
printk("BmCount=0x%lx, ", nsp32_read4(base, BM_CNT));
drivers/scsi/nsp32_debug.c
248
printk("SackCnt=0x%lx, ", nsp32_read4(base, SACK_CNT));
drivers/scsi/nsp32_debug.c
249
printk("SReqCnt=0x%lx, ", nsp32_read4(base, SREQ_CNT));
drivers/scsi/nsp32_debug.c
250
printk("SavedSackCnt=0x%lx, ", nsp32_read4(base, SAVED_SACK_CNT));
drivers/scsi/nsp32_debug.c
251
printk("ScsiBusControl=0x%x, ", nsp32_read1(base, SCSI_BUS_CONTROL));
drivers/scsi/nsp32_debug.c
252
printk("FifoRestCnt=0x%x, ", nsp32_read2(base, FIFO_REST_CNT));
drivers/scsi/nsp32_debug.c
253
printk("CdbIn=0x%x, ", nsp32_read1(base, SCSI_CSB_IN));
drivers/scsi/nsp32_debug.c
254
printk("\n");
drivers/scsi/nsp32_debug.c
257
printk("execph=0x%x, ", nsp32_read2(base, SCSI_EXECUTE_PHASE));
drivers/scsi/nsp32_debug.c
258
printk("IrqStatus=0x%x, ", nsp32_read2(base, IRQ_STATUS));
drivers/scsi/nsp32_debug.c
259
printk("\n");
drivers/scsi/nsp32_debug.c
69
printk("%s[%02x] ", reserved, opcode);
drivers/scsi/nsp32_debug.c
72
printk("%s(notext)[%02x] ", unknown, opcode);
drivers/scsi/nsp32_debug.c
75
printk("%s[%02x] ", vendor, opcode);
drivers/scsi/nsp32_debug.c
79
printk("%s[%02x] ", table[opcode & 0x1f], opcode);
drivers/scsi/nsp32_debug.c
81
printk("%s[%02x] ", unknown, opcode);
drivers/scsi/pcmcia/aha152x_stub.c
179
printk(KERN_INFO "aha152x_cs: no SCSI devices found\n");
drivers/scsi/pcmcia/nsp_cs.c
152
printk("%snsp_cs: %s\n", type, buf);
drivers/scsi/pcmcia/nsp_cs.c
154
printk("%snsp_cs: %s (%d): %s\n", type, func, line, buf);
drivers/scsi/pcmcia/nsp_cs.c
169
printk("nsp_cs-debug: 0x%x %s (%d): %s\n", mask, func, line, buf);
drivers/scsi/pcmcia/nsp_debug.c
101
printk("%02x ", command[i]);
drivers/scsi/pcmcia/nsp_debug.c
106
printk("LBA=%d len=%d",
drivers/scsi/pcmcia/nsp_debug.c
114
printk("LBA=%d len=%d",
drivers/scsi/pcmcia/nsp_debug.c
124
printk("LBA=%d len=%d",
drivers/scsi/pcmcia/nsp_debug.c
138
printk("\n");
drivers/scsi/pcmcia/nsp_debug.c
165
printk(KERN_DEBUG "scsi phase: unknown(%d)\n", i);
drivers/scsi/pcmcia/nsp_debug.c
169
printk(KERN_DEBUG "scsi phase: %s\n", ph[i]);
drivers/scsi/pcmcia/nsp_debug.c
178
printk(KERN_DEBUG "BUSPHASE_COMMAND\n");
drivers/scsi/pcmcia/nsp_debug.c
181
printk(KERN_DEBUG "BUSPHASE_MESSAGE_IN\n");
drivers/scsi/pcmcia/nsp_debug.c
184
printk(KERN_DEBUG "BUSPHASE_MESSAGE_OUT\n");
drivers/scsi/pcmcia/nsp_debug.c
187
printk(KERN_DEBUG "BUSPHASE_DATA_IN\n");
drivers/scsi/pcmcia/nsp_debug.c
190
printk(KERN_DEBUG "BUSPHASE_DATA_OUT\n");
drivers/scsi/pcmcia/nsp_debug.c
193
printk(KERN_DEBUG "BUSPHASE_STATUS\n");
drivers/scsi/pcmcia/nsp_debug.c
196
printk(KERN_DEBUG "BUSPHASE_SELECT\n");
drivers/scsi/pcmcia/nsp_debug.c
199
printk(KERN_DEBUG "BUSPHASE_other\n");
drivers/scsi/pcmcia/nsp_debug.c
208
printk(KERN_DEBUG "msg:");
drivers/scsi/pcmcia/nsp_debug.c
210
printk(" %02x", data->MsgBuffer[i]);
drivers/scsi/pcmcia/nsp_debug.c
212
printk("\n");
drivers/scsi/pcmcia/nsp_debug.c
71
printk("%s[%02x] ", reserved, opcode);
drivers/scsi/pcmcia/nsp_debug.c
74
printk("%s(notext)[%02x] ", unknown, opcode);
drivers/scsi/pcmcia/nsp_debug.c
77
printk("%s[%02x] ", vendor, opcode);
drivers/scsi/pcmcia/nsp_debug.c
81
printk("%s[%02x] ", table[opcode & 0x1f], opcode);
drivers/scsi/pcmcia/nsp_debug.c
83
printk("%s[%02x] ", unknown, opcode);
drivers/scsi/pcmcia/nsp_debug.c
91
printk(KERN_DEBUG);
drivers/scsi/pcmcia/qlogic_stub.c
226
printk(KERN_INFO "%s: no SCSI devices found\n", qlogic_name);
drivers/scsi/pcmcia/sym53c500_cs.c
365
VDEB(printk("SYM53C500_intr called\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
376
printk("status=%02x, seq_reg=%02x, int_reg=%02x, fifo_size=%02x",
drivers/scsi/pcmcia/sym53c500_cs.c
378
printk(", pio=%02x\n", pio_status);
drivers/scsi/pcmcia/sym53c500_cs.c
382
DEB(printk("SYM53C500: reset intr received\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
388
printk("SYM53C500: Warning: PIO error!\n");
drivers/scsi/pcmcia/sym53c500_cs.c
394
printk("SYM53C500: Warning: parity error!\n");
drivers/scsi/pcmcia/sym53c500_cs.c
400
printk("SYM53C500: Warning: gross error!\n");
drivers/scsi/pcmcia/sym53c500_cs.c
406
DEB(printk("SYM53C500: disconnect intr received\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
423
VDEB(printk("SYM53C500: Data-Out phase\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
442
VDEB(printk("SYM53C500: Data-In phase\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
457
printk("SYM53C500: Warning: Unknown interrupt occurred in command phase!\n");
drivers/scsi/pcmcia/sym53c500_cs.c
462
VDEB(printk("SYM53C500: Status phase\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
469
printk("SYM53C500: WARNING: Reserved phase!!!\n");
drivers/scsi/pcmcia/sym53c500_cs.c
473
DEB(printk("SYM53C500: Message-Out phase\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
480
VDEB(printk("SYM53C500: Message-In phase\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
486
VDEB(printk("SCSI FIFO size=%d\n", inb(port_base + FIFO_FLAGS) & 0x1f));
drivers/scsi/pcmcia/sym53c500_cs.c
487
DEB(printk("Status = %02x Message = %02x\n", scp->status, scp->message));
drivers/scsi/pcmcia/sym53c500_cs.c
491
DEB(printk("Discarding SAVE_POINTERS message\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
540
DEB(printk("SYM53C500_info called\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
555
VDEB(printk("SYM53C500_queue called\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
557
DEB(printk("cmd=%02x, cmd_len=%02x, target=%02x, lun=%02x, bufflen=%d\n",
drivers/scsi/pcmcia/sym53c500_cs.c
562
printk("cmd[%d]=%02x ", i, SCpnt->cmnd[i]));
drivers/scsi/pcmcia/sym53c500_cs.c
563
VDEB(printk("\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
590
DEB(printk("SYM53C500_host_reset called\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
605
DEB(printk("SYM53C500_biosparm called\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
750
DEB(printk("SYM53C500: port_base=0x%x, irq=%d, fast_pio=%d\n",
drivers/scsi/pcmcia/sym53c500_cs.c
757
printk("SYM53C500: Unable to register host, giving up.\n");
drivers/scsi/pcmcia/sym53c500_cs.c
765
printk("SYM53C500: unable to allocate IRQ %d\n", irq_level);
drivers/scsi/pcmcia/sym53c500_cs.c
768
DEB(printk("SYM53C500: allocated IRQ %d\n", irq_level));
drivers/scsi/pcmcia/sym53c500_cs.c
770
DEB(printk("SYM53C500: No interrupts detected\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
773
DEB(printk("SYM53C500: Shouldn't get here!\n"));
drivers/scsi/pcmcia/sym53c500_cs.c
804
printk(KERN_INFO "sym53c500_cs: no SCSI devices found\n");
drivers/scsi/pmcraid.c
3775
printk(KERN_INFO "%s(): NULL host pointer\n", __func__);
drivers/scsi/pmcraid.h
984
printk(KERN_ERR "MaxRAID: "__VA_ARGS__)
drivers/scsi/pmcraid.h
988
printk(KERN_INFO "MaxRAID: "__VA_ARGS__)
drivers/scsi/ppa.c
1074
printk(KERN_ERR "ppa%d: failed to claim parport because "
drivers/scsi/ppa.c
145
printk(KERN_INFO "ppa: recon_tmo set to %ld\n", x);
drivers/scsi/ppa.c
148
printk(KERN_WARNING "ppa /proc: invalid variable\n");
drivers/scsi/ppa.c
168
#define ppa_fail(x,y) printk("ppa: ppa_fail(%i) from %s at line %d\n",\
drivers/scsi/ppa.c
214
printk(KERN_WARNING "ppa timeout in ppa_wait\n");
drivers/scsi/ppa.c
246
printk(KERN_WARNING "ppa: ECP sync failed as data still present in FIFO.\n");
drivers/scsi/ppa.c
323
printk(KERN_ERR "PPA: bug in ppa_out()\n");
drivers/scsi/ppa.c
373
printk(KERN_ERR "PPA: bug in ppa_ins()\n");
drivers/scsi/ppa.c
647
printk(KERN_ERR "PPA: bug in ppa_interrupt\n");
drivers/scsi/ppa.c
660
printk(KERN_DEBUG "ppa: no device at SCSI ID %i\n", scmd_id(cmd));
drivers/scsi/ppa.c
663
printk(KERN_DEBUG "ppa: BUS BUSY - EPP timeout detected\n");
drivers/scsi/ppa.c
666
printk(KERN_DEBUG "ppa: unknown timeout\n");
drivers/scsi/ppa.c
669
printk(KERN_DEBUG "ppa: told to abort\n");
drivers/scsi/ppa.c
672
printk(KERN_DEBUG "ppa: parity error (???)\n");
drivers/scsi/ppa.c
675
printk(KERN_DEBUG "ppa: internal driver error\n");
drivers/scsi/ppa.c
678
printk(KERN_DEBUG "ppa: told to reset device\n");
drivers/scsi/ppa.c
681
printk(KERN_WARNING "ppa: bad interrupt (???)\n");
drivers/scsi/ppa.c
684
printk(KERN_WARNING "ppa: bad return code (%02x)\n",
drivers/scsi/ppa.c
739
printk(KERN_ERR "ppa: Parallel port cable is unplugged.\n");
drivers/scsi/ppa.c
814
printk(KERN_ERR "ppa: Invalid scsi phase\n");
drivers/scsi/ppa.c
824
printk(KERN_ERR "PPA: bug in ppa_queuecommand\n");
drivers/scsi/ppa.c
928
printk(KERN_INFO "ppa: Found device at ID %i, Attempting to use %s\n",
drivers/scsi/ppa.c
977
printk(KERN_INFO "ppa: Communication established with ID %i using %s\n",
drivers/scsi/qla1280.c
1008
printk(KERN_INFO
drivers/scsi/qla1280.c
1011
printk(KERN_INFO "scsi(%ld): I/O processing will "
drivers/scsi/qla1280.c
1156
printk(KERN_WARNING "scsi(%ld:%i:%i): "
drivers/scsi/qla1280.c
1359
printk(KERN_WARNING
drivers/scsi/qla1280.c
1442
printk(KERN_ERR "scsi(%li): initialize: pci probe failed!\n",
drivers/scsi/qla1280.c
1511
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
drivers/scsi/qla1280.c
1517
printk(KERN_ERR "Invalid firmware length %zu in image \"%s\"\n",
drivers/scsi/qla1280.c
1613
printk(KERN_INFO "qla1280: Wrong product ID = "
drivers/scsi/qla1280.c
1645
printk(KERN_INFO "qla1280: Failed mbox check\n");
drivers/scsi/qla1280.c
1686
printk(KERN_ERR "scsi(%li): Failed to load firmware\n",
drivers/scsi/qla1280.c
1767
printk(KERN_ERR "scsi(%li): Failed to load partial "
drivers/scsi/qla1280.c
1783
printk(KERN_ERR
drivers/scsi/qla1280.c
1790
printk(KERN_ERR "%s: FW compare error @ "
drivers/scsi/qla1280.c
1793
printk(KERN_ERR "%s: FWbyte=%x "
drivers/scsi/qla1280.c
1828
printk(KERN_ERR "scsi(%li): RISC checksum failed.\n", ha->host_no);
drivers/scsi/qla1280.c
1838
printk(KERN_ERR "scsi(%li): Failed to start firmware\n",
drivers/scsi/qla1280.c
2427
printk(KERN_ERR "Warning mailbox wait already in use!\n");
drivers/scsi/qla1280.c
2467
printk(KERN_WARNING "qla1280_mailbox_command: Command failed, "
drivers/scsi/qla1280.c
2471
printk(KERN_WARNING "m0 %04x, m1 %04x, m2 %04x, m3 %04x\n",
drivers/scsi/qla1280.c
2474
printk(KERN_WARNING "m4 %04x, m5 %04x, m6 %04x, m7 %04x\n",
drivers/scsi/qla1280.c
2549
printk(KERN_INFO "scsi(%li:%i): Resetting SCSI BUS\n",
drivers/scsi/qla1280.c
3415
printk(KERN_WARNING
drivers/scsi/qla1280.c
3426
printk(KERN_DEBUG "qla1280_isr(): index %i "
drivers/scsi/qla1280.c
3431
printk(KERN_WARNING
drivers/scsi/qla1280.c
3438
printk(KERN_WARNING
drivers/scsi/qla1280.c
3443
printk(KERN_WARNING
drivers/scsi/qla1280.c
3457
printk(KERN_INFO "qla1280_isr(): asynchronous "
drivers/scsi/qla1280.c
3613
printk(KERN_WARNING "qla1280: Status Entry invalid handle\n");
drivers/scsi/qla1280.c
3733
printk(KERN_WARNING "!qla1280: Error Entry invalid handle");
drivers/scsi/qla1280.c
3771
printk(KERN_INFO "scsi(%li): dequeuing outstanding commands\n",
drivers/scsi/qla1280.c
3806
printk(KERN_WARNING
drivers/scsi/qla1280.c
3899
printk(KERN_INFO "scsi(%li:%d:%d:%d):", ha->host_no, bus, target, lun);
drivers/scsi/qla1280.c
3902
printk(KERN_CONT " Sync: period %d, offset %d",
drivers/scsi/qla1280.c
3905
printk(KERN_CONT ", Wide");
drivers/scsi/qla1280.c
3907
printk(KERN_CONT ", DT");
drivers/scsi/qla1280.c
3909
printk(KERN_CONT " Async");
drivers/scsi/qla1280.c
3912
printk(KERN_CONT ", Tagged queuing: depth %d", device->queue_depth);
drivers/scsi/qla1280.c
3913
printk(KERN_CONT "\n");
drivers/scsi/qla1280.c
3924
printk(KERN_DEBUG " 0 1 2 3 4 5 6 7 8 9 Ah "
drivers/scsi/qla1280.c
3926
printk(KERN_DEBUG "---------------------------------------------"
drivers/scsi/qla1280.c
3932
printk("0x%02x", c);
drivers/scsi/qla1280.c
3935
printk("\n");
drivers/scsi/qla1280.c
3937
printk(" ");
drivers/scsi/qla1280.c
3940
printk("\n");
drivers/scsi/qla1280.c
3959
printk("SCSI Command @= 0x%p, Handle=0x%p\n", cmd, CMD_HANDLE(cmd));
drivers/scsi/qla1280.c
3960
printk(" chan=%d, target = 0x%02x, lun = 0x%02llx, cmd_len = 0x%02x\n",
drivers/scsi/qla1280.c
3963
printk(" CDB = ");
drivers/scsi/qla1280.c
3965
printk("0x%02x ", cmd->cmnd[i]);
drivers/scsi/qla1280.c
3967
printk(" seg_cnt =%d\n", scsi_sg_count(cmd));
drivers/scsi/qla1280.c
3968
printk(" request buffer=0x%p, request buffer len=0x%x\n",
drivers/scsi/qla1280.c
3976
printk(" tag=%d, transfersize=0x%x \n",
drivers/scsi/qla1280.c
3978
printk(" underflow size = 0x%x, direction=0x%x\n",
drivers/scsi/qla1280.c
4061
printk(KERN_INFO "qla1280: unknown boot option %s\n",
drivers/scsi/qla1280.c
4128
printk(KERN_INFO
drivers/scsi/qla1280.c
4133
printk(KERN_INFO "qla1280: %s found on PCI bus %i, dev %i\n",
drivers/scsi/qla1280.c
4137
printk(KERN_WARNING
drivers/scsi/qla1280.c
4147
printk(KERN_WARNING
drivers/scsi/qla1280.c
4161
printk(KERN_WARNING "scsi(%li): Unable to set a "
drivers/scsi/qla1280.c
4171
printk(KERN_WARNING "scsi(%li): Unable to set a "
drivers/scsi/qla1280.c
4182
printk(KERN_INFO "qla1280: Failed to get request memory\n");
drivers/scsi/qla1280.c
4190
printk(KERN_INFO "qla1280: Failed to get response memory\n");
drivers/scsi/qla1280.c
4211
printk(KERN_INFO "qla1280: Unable to map I/O memory\n");
drivers/scsi/qla1280.c
4220
printk(KERN_INFO "qla1280: Failed to reserve i/o region "
drivers/scsi/qla1280.c
4236
printk("qla1280 : Failed to reserve interrupt %d already "
drivers/scsi/qla1280.c
4243
printk(KERN_INFO "qla1x160: Failed to initialize adapter\n");
drivers/scsi/qla1280.c
554
do { if (ql_debug_level >= level) printk(KERN_ERR format, ##a); } while(0)
drivers/scsi/qla1280.c
584
printk(KERN_INFO "scsi(%ld): Reading NVRAM\n", ha->host_no);
drivers/scsi/qla1280.c
616
printk(KERN_WARNING "scsi(%ld): Unable to identify or "
drivers/scsi/qla1280.c
731
printk(KERN_ERR "scsi(%ld): mailbox timed out, mailbox0 %04x, "
drivers/scsi/qla1280.c
838
printk(KERN_INFO "scsi(%li): Resetting Cmnd=0x%p, "
drivers/scsi/qla1280.c
860
printk(KERN_INFO
drivers/scsi/qla1280.c
882
printk(KERN_INFO
drivers/scsi/qla1280.c
894
printk(KERN_INFO "qla1280(%ld:%d): Issued bus "
drivers/scsi/qla1280.c
920
printk(KERN_WARNING
drivers/scsi/qla2xxx/qla_mbx.c
583
printk(" mb[%u]=%x", i, mcp->mb[i]);
drivers/scsi/qla2xxx/qla_nx.c
2056
printk(KERN_INFO
drivers/scsi/qla2xxx/qla_nx.c
2119
printk(KERN_INFO
drivers/scsi/qla2xxx/qla_nx.c
2152
printk(KERN_INFO
drivers/scsi/qla2xxx/tcm_qla2xxx.c
1199
printk(KERN_ERR "Unable to insert s_id into fcport_map: %06x\n",
drivers/scsi/qla4xxx/ql4_dbg.c
100
printk(KERN_INFO "0x%02X port_err_status = 0x%08X\n", (uint8_t)
drivers/scsi/qla4xxx/ql4_dbg.c
104
printk(KERN_INFO "Page 0 Registers:\n");
drivers/scsi/qla4xxx/ql4_dbg.c
105
printk(KERN_INFO "0x%02X ext_hw_conf = 0x%08X\n", (uint8_t)
drivers/scsi/qla4xxx/ql4_dbg.c
108
printk(KERN_INFO "0x%02X port_ctrl = 0x%08X\n", (uint8_t)
drivers/scsi/qla4xxx/ql4_dbg.c
111
printk(KERN_INFO "0x%02X port_status = 0x%08X\n", (uint8_t)
drivers/scsi/qla4xxx/ql4_dbg.c
114
printk(KERN_INFO "0x%02X gp_out = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
117
printk(KERN_INFO "0x%02X gp_in = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
120
printk(KERN_INFO "0x%02X port_err_status = 0x%08X\n", (uint8_t)
drivers/scsi/qla4xxx/ql4_dbg.c
123
printk(KERN_INFO "Page 1 Registers:\n");
drivers/scsi/qla4xxx/ql4_dbg.c
126
printk(KERN_INFO "0x%02X req_q_out = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
17
printk(" 0 1 2 3 4 5 6 7 8 9 Ah Bh Ch Dh Eh "
drivers/scsi/qla4xxx/ql4_dbg.c
19
printk("------------------------------------------------------------"
drivers/scsi/qla4xxx/ql4_dbg.c
22
printk("%02x", *c);
drivers/scsi/qla4xxx/ql4_dbg.c
24
printk("\n");
drivers/scsi/qla4xxx/ql4_dbg.c
27
printk(" ");
drivers/scsi/qla4xxx/ql4_dbg.c
29
printk(KERN_INFO "\n");
drivers/scsi/qla4xxx/ql4_dbg.c
38
printk(KERN_INFO "mailbox[%d] = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
44
printk(KERN_INFO "0x%02X mailbox[%d] = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
49
printk(KERN_INFO "0x%02X flash_address = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
52
printk(KERN_INFO "0x%02X flash_data = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
55
printk(KERN_INFO "0x%02X ctrl_status = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
60
printk(KERN_INFO "0x%02X nvram = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
64
printk(KERN_INFO "0x%02X intr_mask = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
67
printk(KERN_INFO "0x%02X nvram = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
70
printk(KERN_INFO "0x%02X semaphore = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
74
printk(KERN_INFO "0x%02X req_q_in = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
77
printk(KERN_INFO "0x%02X rsp_q_out = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
82
printk(KERN_INFO "0x%02X ext_hw_conf = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
85
printk(KERN_INFO "0x%02X port_ctrl = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
88
printk(KERN_INFO "0x%02X port_status = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
91
printk(KERN_INFO "0x%02X req_q_out = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
94
printk(KERN_INFO "0x%02X gp_out = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_dbg.c
97
printk(KERN_INFO "0x%02X gp_in = 0x%08X\n",
drivers/scsi/qla4xxx/ql4_init.c
156
DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
drivers/scsi/qla4xxx/ql4_init.c
165
DEBUG2(printk("scsi%ld: %s: get_flash FLASH_OFFSET_SYS_INFO "
drivers/scsi/qla4xxx/ql4_init.c
233
DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
drivers/scsi/qla4xxx/ql4_init.c
241
DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
drivers/scsi/qla4xxx/ql4_init.c
254
DEBUG2(printk("scsi%ld: %s: LinkLocal Router & "
drivers/scsi/qla4xxx/ql4_init.c
261
DEBUG2(printk("scsi%ld: %s: Wait for additional "
drivers/scsi/qla4xxx/ql4_init.c
264
DEBUG2(printk("IPv4 "));
drivers/scsi/qla4xxx/ql4_init.c
267
DEBUG2(printk("IPv6LinkLocal "));
drivers/scsi/qla4xxx/ql4_init.c
270
DEBUG2(printk("IPv6Addr0 "));
drivers/scsi/qla4xxx/ql4_init.c
273
DEBUG2(printk("IPv6Addr1 "));
drivers/scsi/qla4xxx/ql4_init.c
274
DEBUG2(printk("\"\n"));
drivers/scsi/qla4xxx/ql4_init.c
31
DEBUG2(printk("scsi%ld: %s: Invalid function number, "
drivers/scsi/qla4xxx/ql4_init.c
36
DEBUG2(printk("scsi%ld: %s: mac_index %d.\n", ha->host_no, __func__,
drivers/scsi/qla4xxx/ql4_init.c
414
DEBUG2(printk("scsi%ld: %s: unable to get firmware "
drivers/scsi/qla4xxx/ql4_init.c
420
DEBUG2(printk("scsi%ld: %s: an unrecoverable error has"
drivers/scsi/qla4xxx/ql4_init.c
438
DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:"
drivers/scsi/qla4xxx/ql4_init.c
444
DEBUG2(printk(KERN_INFO "scsi%ld: %s: fwstate:"
drivers/scsi/qla4xxx/ql4_init.c
456
DEBUG2(printk(KERN_INFO "scsi%ld: %s:"
drivers/scsi/qla4xxx/ql4_init.c
462
DEBUG2(printk(KERN_INFO "scsi%ld: %s: "
drivers/scsi/qla4xxx/ql4_init.c
512
DEBUG2(printk("scsi%ld: %s: waiting on fw, state=%x:%x - "
drivers/scsi/qla4xxx/ql4_init.c
526
DEBUG2(printk("scsi%ld: %s: FW Initialization timed out!\n",
drivers/scsi/qla4xxx/ql4_init.c
530
DEBUG2(printk("scsi%ld: %s: FW initialized, but is reporting "
drivers/scsi/qla4xxx/ql4_init.c
535
DEBUG2(printk("scsi%ld: %s: FW initialized, but "
drivers/scsi/qla4xxx/ql4_init.c
565
DEBUG2(printk("scsi%ld: %s: Failed to initialize firmware "
drivers/scsi/qla4xxx/ql4_init.c
599
DEBUG2(printk("scsi%ld: %s: Get EEProm parameters \n", ha->host_no,
drivers/scsi/qla4xxx/ql4_init.c
635
DEBUG(printk("scsi%ld: %s: Setting extHwConfig to 0xFFFF%04x\n",
drivers/scsi/qla4xxx/ql4_init.c
699
DEBUG(printk("scsi%d: %s: Start firmware from flash ROM\n",
drivers/scsi/qla4xxx/ql4_init.c
716
DEBUG2(printk(KERN_INFO "scsi%ld: %s: Wait up to %d seconds for "
drivers/scsi/qla4xxx/ql4_init.c
733
DEBUG2(printk(KERN_INFO "scsi%ld: %s: Waiting for boot "
drivers/scsi/qla4xxx/ql4_init.c
741
DEBUG(printk(KERN_INFO "scsi%ld: %s: Firmware has started\n",
drivers/scsi/qla4xxx/ql4_init.c
752
printk(KERN_INFO "scsi%ld: %s: Boot firmware failed "
drivers/scsi/qla4xxx/ql4_init.c
769
DEBUG2(printk("scsi%ld: %s: Waiting for "
drivers/scsi/qla4xxx/ql4_init.c
775
DEBUG2(printk("scsi%ld: %s: Global Init Semaphore "
drivers/scsi/qla4xxx/ql4_init.c
806
DEBUG2(printk("scsi%ld: %s: port_ctrl = 0x%08X\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_init.c
808
DEBUG(printk("scsi%ld: %s: port_status = 0x%08X\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_init.c
813
DEBUG(printk("scsi%ld: %s: Hardware has already been "
drivers/scsi/qla4xxx/ql4_init.c
819
DEBUG2(printk("scsi%ld: %s: H/W Config complete - mbox[0]= "
drivers/scsi/qla4xxx/ql4_init.c
836
DEBUG2(printk("scsi%ld: %s: Get firmware "
drivers/scsi/qla4xxx/ql4_init.c
843
DEBUG2(printk("scsi%ld: %s: Firmware "
drivers/scsi/qla4xxx/ql4_init.c
853
DEBUG2(printk("scsi%ld: %s: Firmware in "
drivers/scsi/qla4xxx/ql4_init.c
862
DEBUG(printk("scsi%ld: %s: H/W initialization hasn't been "
drivers/scsi/qla4xxx/ql4_init.c
867
DEBUG(printk("scsi%ld: %s: Flags soft_rest=%d, config= %d\n ",
drivers/scsi/qla4xxx/ql4_init.c
870
DEBUG(printk("scsi%ld: %s: Issue Soft Reset\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_init.c
875
DEBUG(printk("scsi%d: %s: Soft Reset failed!\n",
drivers/scsi/qla4xxx/ql4_init.c
899
DEBUG(printk("scsi%ld: %s: Firmware has NOT started\n",
drivers/scsi/qla4xxx/ql4_init.c
996
DEBUG2(printk("scsi%ld: initialize adapter: %s\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_inline.h
31
DEBUG3(printk("scsi%d: %s: ddb [%d], ddb_entry = %p\n",
drivers/scsi/qla4xxx/ql4_iocb.c
300
DEBUG2(printk("scsi%ld: %s: Adapter OFFLINE! "
drivers/scsi/qla4xxx/ql4_isr.c
1011
DEBUG2(printk(KERN_WARNING
drivers/scsi/qla4xxx/ql4_isr.c
1017
DEBUG2(printk("scsi%ld: Unknown mailbox status %08X\n",
drivers/scsi/qla4xxx/ql4_isr.c
1130
DEBUG2(printk(KERN_INFO
drivers/scsi/qla4xxx/ql4_isr.c
1160
DEBUG2(printk(KERN_INFO "scsi%ld: Fatal Error, "
drivers/scsi/qla4xxx/ql4_isr.c
1335
DEBUG2(printk(KERN_INFO
drivers/scsi/qla4xxx/ql4_isr.c
137
DEBUG2(printk("scsi%ld: %s: Command already returned back to "
drivers/scsi/qla4xxx/ql4_isr.c
1495
DEBUG2(printk("qla4xxx(%ld): AEN[%d]=0x%08x, mbx1=0x%08x mbx2=0x%08x"
drivers/scsi/qla4xxx/ql4_isr.c
1505
DEBUG2(printk("scsi%ld: AEN[%d] %04x, index "
drivers/scsi/qla4xxx/ql4_isr.c
171
DEBUG2(printk("scsi%ld:%d:%d:%llu: %s: "
drivers/scsi/qla4xxx/ql4_isr.c
199
DEBUG2(printk("scsi%ld:%d:%d:%llu: %s: Device RESET occurred\n",
drivers/scsi/qla4xxx/ql4_isr.c
207
DEBUG2(printk("scsi%ld:%d:%d:%llu: %s: Abort occurred\n",
drivers/scsi/qla4xxx/ql4_isr.c
215
DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%llu: Timeout\n",
drivers/scsi/qla4xxx/ql4_isr.c
234
DEBUG2(printk("scsi%ld:%d:%d:%llu: %s: " "Data overrun\n",
drivers/scsi/qla4xxx/ql4_isr.c
315
DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%llu: SCS_DEVICE "
drivers/scsi/qla4xxx/ql4_isr.c
335
DEBUG2(printk("scsi%ld:%d:%llu: %s: QUEUE FULL detected "
drivers/scsi/qla4xxx/ql4_isr.c
45
DEBUG2(printk(KERN_INFO "scsi%ld:%d:%d:%llu: %s: sense key = %x, "
drivers/scsi/qla4xxx/ql4_isr.c
525
DEBUG2(printk("scsi%ld: %s: FW device queue full, "
drivers/scsi/qla4xxx/ql4_isr.c
536
DEBUG2(printk("scsi%ld: %s: Continuation entry - "
drivers/scsi/qla4xxx/ql4_isr.c
552
DEBUG2(printk("scsi%ld: %s: Invalid entry %x in "
drivers/scsi/qla4xxx/ql4_isr.c
570
DEBUG2(printk("scsi%ld: %s: Invalid handle(srb)=%p type=%x IOCS=%x\n",
drivers/scsi/qla4xxx/ql4_isr.c
710
DEBUG2(printk("scsi%ld: %s:Don't Reset HBA\n",
drivers/scsi/qla4xxx/ql4_isr.c
723
DEBUG2(printk("scsi%ld: AEN %04x, ERROR Status, "
drivers/scsi/qla4xxx/ql4_isr.c
766
DEBUG2(printk("scsi%ld: AEN %04x DHCP LEASE "
drivers/scsi/qla4xxx/ql4_isr.c
780
DEBUG2(printk("scsi%ld: AEN %04x\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_isr.c
785
printk("scsi%ld: AEN %04x, mbox_sts[2]=%04x, "
drivers/scsi/qla4xxx/ql4_isr.c
834
DEBUG2(printk(KERN_INFO "scsi%ld: AEN %04x, "
drivers/scsi/qla4xxx/ql4_isr.c
843
DEBUG2(printk("scsi%ld: AEN %04x, mbox_sts[1]=%04x, "
drivers/scsi/qla4xxx/ql4_isr.c
86
DEBUG2(printk(KERN_INFO "scsi%ld: %s: Cmd already returned "
drivers/scsi/qla4xxx/ql4_isr.c
862
DEBUG2(printk("scsi%ld: AEN[%d] %04x queued "
drivers/scsi/qla4xxx/ql4_isr.c
878
DEBUG2(printk("scsi%ld: %s: aen %04x, queue "
drivers/scsi/qla4xxx/ql4_isr.c
883
DEBUG2(printk("scsi%ld: DUMP AEN QUEUE\n",
drivers/scsi/qla4xxx/ql4_isr.c
887
DEBUG2(printk("AEN[%d] %04x %04x %04x "
drivers/scsi/qla4xxx/ql4_isr.c
896
DEBUG2(printk(KERN_WARNING
drivers/scsi/qla4xxx/ql4_isr.c
902
DEBUG2(printk(KERN_WARNING
drivers/scsi/qla4xxx/ql4_mbx.c
1026
DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve size!\n",
drivers/scsi/qla4xxx/ql4_mbx.c
1032
DEBUG2(printk("scsi%ld: %s: ERROR: Crash record size is 0!\n",
drivers/scsi/qla4xxx/ql4_mbx.c
111
DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Perm failure on EEH, "
drivers/scsi/qla4xxx/ql4_mbx.c
1110
DEBUG2(printk("scsi%ld: %s: ERROR: Unable to retrieve event "
drivers/scsi/qla4xxx/ql4_mbx.c
1124
DEBUG3(printk("scsi%ld: Connection Event Log Dump (%d entries):\n",
drivers/scsi/qla4xxx/ql4_mbx.c
1202
DEBUG2(printk(KERN_WARNING "scsi%ld:%d:%llu: abort task FAILED: "
drivers/scsi/qla4xxx/ql4_mbx.c
1229
DEBUG2(printk("scsi%ld:%d:%llu: lun reset issued\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_mbx.c
1274
DEBUG2(printk("scsi%ld:%d: target reset issued\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_mbx.c
128
DEBUG2(printk("scsi%ld: %s: mbox_sem failed\n",
drivers/scsi/qla4xxx/ql4_mbx.c
1314
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_READ_FLASH, failed w/ "
drivers/scsi/qla4xxx/ql4_mbx.c
1411
DEBUG2(printk("scsi%ld: %s: failed status %04X\n",
drivers/scsi/qla4xxx/ql4_mbx.c
388
DEBUG2(printk(KERN_WARNING "scsi%ld: %s: "
drivers/scsi/qla4xxx/ql4_mbx.c
410
DEBUG2(printk(KERN_WARNING "scsi%ld: %s: "
drivers/scsi/qla4xxx/ql4_mbx.c
591
DEBUG2(printk(KERN_WARNING
drivers/scsi/qla4xxx/ql4_mbx.c
631
DEBUG2(printk("scsi%ld: %s: Unable to alloc init_cb\n",
drivers/scsi/qla4xxx/ql4_mbx.c
676
DEBUG2(printk(KERN_WARNING
drivers/scsi/qla4xxx/ql4_mbx.c
684
DEBUG2(printk("scsi%ld: %s: Failed to update local ifcb\n",
drivers/scsi/qla4xxx/ql4_mbx.c
712
printk("scsi%ld: %s: Unable to alloc init_cb\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_mbx.c
720
DEBUG2(printk("scsi%ld: %s: Failed to get init_fw_ctrl_blk\n",
drivers/scsi/qla4xxx/ql4_mbx.c
753
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATE failed w/ "
drivers/scsi/qla4xxx/ql4_mbx.c
761
DEBUG2(printk("scsi%ld: %s firmware_state=0x%x\n",
drivers/scsi/qla4xxx/ql4_mbx.c
784
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_FW_STATUS failed w/ "
drivers/scsi/qla4xxx/ql4_mbx.c
839
DEBUG2(printk("scsi%ld: %s: ddb [%d] out of range.\n",
drivers/scsi/qla4xxx/ql4_mbx.c
856
DEBUG2(printk("scsi%ld: %s: MBOX_CMD_GET_DATABASE_ENTRY failed"
drivers/scsi/qla4xxx/ql4_mbx.c
862
DEBUG2(printk("scsi%ld: %s: ddb mismatch [%d] != [%d].\n",
drivers/scsi/qla4xxx/ql4_mbx.c
94
DEBUG2(printk("scsi%ld: %s: Invalid mbx_cmd or mbx_sts "
drivers/scsi/qla4xxx/ql4_mbx.c
968
DEBUG2(printk("scsi%ld: %s: status=%d mbx0=0x%x mbx4=0x%x\n",
drivers/scsi/qla4xxx/ql4_nvram.c
208
DEBUG2(printk("scsi%ld : Trying to get SEM lock - mask= 0x%x, code = "
drivers/scsi/qla4xxx/ql4_nvram.c
216
DEBUG2(printk("scsi%ld : Got SEM LOCK - mask= 0x%x, "
drivers/scsi/qla4xxx/ql4_nvram.c
235
DEBUG2(printk("scsi%ld : UNLOCK SEM - mask= 0x%x\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_nvram.c
249
DEBUG2(printk("scsi%ld : Got SEM LOCK - mask= 0x%x, code = "
drivers/scsi/qla4xxx/ql4_nvram.c
37
DEBUG5(printk(KERN_ERR "fm93c56a_select:\n"));
drivers/scsi/qla4xxx/ql4_nx.c
1281
DEBUG2(printk("scsi%ld: %s: bootldr=0x%lx, fw_image=0x%x\n",
drivers/scsi/qla4xxx/ql4_nx.c
1321
printk(KERN_WARNING "%s: Error during CRB Initialization\n",
drivers/scsi/qla4xxx/ql4_nx.c
1339
printk("%s: Error trying to load fw from flash!\n", __func__);
drivers/scsi/qla4xxx/ql4_nx.c
1562
printk(KERN_WARNING "%s: init failed, "
drivers/scsi/qla4xxx/ql4_nx.c
1745
printk("%s: Error trying to start fw!\n", __func__);
drivers/scsi/qla4xxx/ql4_nx.c
1751
printk("%s: Error during card handshake!\n", __func__);
drivers/scsi/qla4xxx/ql4_nx.c
3973
DEBUG2(printk("scsi%ld: %s: status = %d\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_nx.c
4031
DEBUG2(printk("scsi%ld: %s: Unable to allocate dma buffer.\n",
drivers/scsi/qla4xxx/ql4_nx.c
4046
DEBUG2(printk("scsi%ld: %s: GET_SYS_INFO failed\n",
drivers/scsi/qla4xxx/ql4_nx.c
4054
DEBUG2(printk("scsi%ld: %s: GET_SYS_INFO data receive"
drivers/scsi/qla4xxx/ql4_nx.c
4071
DEBUG2(printk("scsi%ld: %s: mac %pM serial %s\n",
drivers/scsi/qla4xxx/ql4_nx.c
624
printk("%s: QM access not handled.\n", __func__);
drivers/scsi/qla4xxx/ql4_nx.c
637
printk("%s: Written OCMwin (0x%x) != Read"
drivers/scsi/qla4xxx/ql4_nx.c
652
printk("%s: Written MSwin (0x%x) != Read "
drivers/scsi/qla4xxx/ql4_nx.c
664
printk("%s: Warning:%s Unknown address range!\n",
drivers/scsi/qla4xxx/ql4_nx.c
723
printk(KERN_ERR"%s out of bound pci memory access. "
drivers/scsi/qla4xxx/ql4_nx.c
796
printk(KERN_ERR"%s out of bound pci memory access. "
drivers/scsi/qla4xxx/ql4_nx.c
916
printk("%s: Timeout reached waiting for rom done",
drivers/scsi/qla4xxx/ql4_nx.c
932
printk("%s: Error waiting for rom done\n", DRIVER_NAME);
drivers/scsi/qla4xxx/ql4_os.c
3103
printk(KERN_ERR "qla4xxx: missing ep.\n");
drivers/scsi/qla4xxx/ql4_os.c
3320
DEBUG2(printk(KERN_INFO "%s: DDB state [%d]\n", __func__,
drivers/scsi/qla4xxx/ql4_os.c
3371
DEBUG3(printk(KERN_INFO "Status returned\n"));
drivers/scsi/qla4xxx/ql4_os.c
3373
DEBUG3(printk(KERN_INFO "Response buffer"));
drivers/scsi/qla4xxx/ql4_os.c
4017
DEBUG(printk("scsi: %s: Starting timer thread for adapter %d\n",
drivers/scsi/qla4xxx/ql4_os.c
4368
DEBUG2(printk(KERN_WARNING "scsi%ld: %s: Device in frozen "
drivers/scsi/qla4xxx/ql4_os.c
4607
DEBUG2(printk("scsi%ld: %s: scheduling dpc routine"
drivers/scsi/qla4xxx/ql4_os.c
4677
DEBUG2(printk(KERN_ERR "scsi%ld: %s\n", ha->host_no, __func__));
drivers/scsi/qla4xxx/ql4_os.c
4730
DEBUG2(printk(KERN_WARNING
drivers/scsi/qla4xxx/ql4_os.c
5012
DEBUG2(printk("scsi%ld: recover adapter - retrying "
drivers/scsi/qla4xxx/ql4_os.c
5021
DEBUG2(printk("scsi%ld: recover adapter - "
drivers/scsi/qla4xxx/ql4_os.c
5031
DEBUG2(printk("scsi%ld: recover adapter "
drivers/scsi/qla4xxx/ql4_os.c
5057
DEBUG2(printk("scsi%ld: recover adapter: %s\n", ha->host_no,
drivers/scsi/qla4xxx/ql4_os.c
5332
DEBUG2(printk(KERN_INFO "scsi%ld: %s: flags = %lx\n",
drivers/scsi/qla4xxx/ql4_os.c
5399
DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n",
drivers/scsi/qla4xxx/ql4_os.c
5420
DEBUG2(printk("scsi%ld: %s: SR|FSR "
drivers/scsi/qla4xxx/ql4_os.c
5536
printk(KERN_WARNING
drivers/scsi/qla4xxx/ql4_os.c
5542
DEBUG2(printk(KERN_INFO "%s: revision-id=%d\n",
drivers/scsi/qla4xxx/ql4_os.c
5549
DEBUG2(printk(KERN_INFO "%s: ioremap from %lx a size of %lx\n",
drivers/scsi/qla4xxx/ql4_os.c
5555
printk(KERN_ERR
drivers/scsi/qla4xxx/ql4_os.c
6290
DEBUG2(printk(KERN_INFO "Func: %s\n", __func__));
drivers/scsi/qla4xxx/ql4_os.c
8649
printk(KERN_WARNING
drivers/scsi/qla4xxx/ql4_os.c
8781
DEBUG2(printk("scsi: %s: retrying adapter initialization "
drivers/scsi/qla4xxx/ql4_os.c
8802
DEBUG2(printk(KERN_ERR "HW STATE: FAILED\n"));
drivers/scsi/qla4xxx/ql4_os.c
8813
DEBUG2(printk("scsi: %s: Starting kernel thread for "
drivers/scsi/qla4xxx/ql4_os.c
8857
printk(KERN_INFO
drivers/scsi/qla4xxx/ql4_os.c
9246
DEBUG3(printk("scsi%ld:%d:%llu: Abort_task mbx failed.\n",
drivers/scsi/qla4xxx/ql4_os.c
9250
DEBUG3(printk("scsi%ld:%d:%llu: Abort_task mbx success.\n",
drivers/scsi/qla4xxx/ql4_os.c
9260
DEBUG2(printk("scsi%ld:%d:%llu: Abort handler timed out\n",
drivers/scsi/qla4xxx/ql4_os.c
9299
DEBUG2(printk(KERN_INFO
drivers/scsi/qla4xxx/ql4_os.c
9366
DEBUG2(printk(KERN_INFO
drivers/scsi/qla4xxx/ql4_os.c
9452
DEBUG2(printk("scsi%ld: %s: Don't Reset HBA\n",
drivers/scsi/qla4xxx/ql4_os.c
9467
DEBUG2(printk("scsi%ld:%d: %s: Unable to reset host. Adapter "
drivers/scsi/qla4xxx/ql4_os.c
9911
printk(KERN_ERR
drivers/scsi/qla4xxx/ql4_os.c
9934
printk(KERN_INFO "QLogic iSCSI HBA Driver\n");
drivers/scsi/qlogicfas.c
207
printk(KERN_INFO "%s: no cards were found, please specify "
drivers/scsi/qlogicfas.c
76
printk(KERN_INFO "%s: address %#x is busy\n", qlogicfas_name,
drivers/scsi/qlogicfas.c
82
printk(KERN_WARNING "%s: probe failed for %#x\n",
drivers/scsi/qlogicfas.c
88
printk(KERN_INFO "%s: Using preset base address of %03x,"
drivers/scsi/qlogicfas408.c
286
printk(KERN_ERR "Ql:Bad Interrupt status:%02x\n", i);
drivers/scsi/qlogicfas408.c
299
printk(KERN_ERR "Ql:Bad sequence for command %d, int %02X, cmdleft = %d\n",
drivers/scsi/qlogicfas408.c
386
printk(KERN_ERR "Ql:Error during status phase, int=%02X, %d bytes recd\n", i, j);
drivers/scsi/qlogicpti.c
1054
printk(KERN_EMERG "qlogicpti%d: request queue overflow\n",
drivers/scsi/qlogicpti.c
1123
printk(KERN_EMERG "qlogicpti%d: unknown completion status 0x%04x\n",
drivers/scsi/qlogicpti.c
1236
printk(KERN_WARNING "qlogicpti%d: Aborting cmd for tgt[%d] lun[%d]\n",
drivers/scsi/qlogicpti.c
1255
printk(KERN_EMERG "qlogicpti%d: scsi abort failure: %x\n",
drivers/scsi/qlogicpti.c
1272
printk(KERN_WARNING "qlogicpti%d: Resetting SCSI bus!\n",
drivers/scsi/qlogicpti.c
1281
printk(KERN_EMERG "qlogicisp%d: scsi bus reset failure: %x\n",
drivers/scsi/qlogicpti.c
1360
printk("(Firmware v%d.%d.%d)", qpti->fware_majrev,
drivers/scsi/qlogicpti.c
1365
printk("(FCode %s)", fcode);
drivers/scsi/qlogicpti.c
1368
printk("\nqlogicpti%d: [%s Wide, using %s interface]\n",
drivers/scsi/qlogicpti.c
1374
printk("qlogicpti%d: Failed scsi_add_host\n", qpti->qpti_id);
drivers/scsi/qlogicpti.c
197
printk(KERN_EMERG "qlogicpti%d: mbox_command loop timeout #1\n",
drivers/scsi/qlogicpti.c
234
printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #2\n",
drivers/scsi/qlogicpti.c
248
printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #3\n",
drivers/scsi/qlogicpti.c
256
printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #4\n",
drivers/scsi/qlogicpti.c
355
printk(KERN_EMERG "qlogicpti%d: reset_hardware loop timeout\n",
drivers/scsi/qlogicpti.c
383
printk(KERN_EMERG "qlogicpti%d: Cannot execute ISP firmware.\n",
drivers/scsi/qlogicpti.c
394
printk(KERN_EMERG "qlogicpti%d: Cannot set initiator SCSI ID.\n",
drivers/scsi/qlogicpti.c
409
printk(KERN_EMERG "qlogicpti%d: Cannot init response queue.\n",
drivers/scsi/qlogicpti.c
421
printk(KERN_EMERG "qlogicpti%d: Cannot init request queue.\n",
drivers/scsi/qlogicpti.c
490
printk(KERN_ERR "Failed to load image \"%s\" err %d\n",
drivers/scsi/qlogicpti.c
495
printk(KERN_ERR "Bogus length %zu in image \"%s\"\n",
drivers/scsi/qlogicpti.c
512
printk(KERN_EMERG "qlogicpti%d: Aieee, firmware checksum failed!",
drivers/scsi/qlogicpti.c
524
printk(KERN_EMERG "qlogicpti%d: Cannot reset the ISP.", qpti->qpti_id);
drivers/scsi/qlogicpti.c
562
printk(KERN_EMERG "qlogicpti%d: Cannot stop firmware for reload.\n",
drivers/scsi/qlogicpti.c
575
printk("qlogicpti%d: Firmware dload failed, I'm bolixed!\n",
drivers/scsi/qlogicpti.c
595
printk(KERN_EMERG "qlogicpti%d: New firmware csum failure!\n",
drivers/scsi/qlogicpti.c
609
printk(KERN_EMERG "qlogicpti%d: AboutFirmware cmd fails.\n",
drivers/scsi/qlogicpti.c
625
printk(KERN_EMERG "qlogicpti%d: could not set clock rate.\n",
drivers/scsi/qlogicpti.c
657
printk("qlogicpti%d: Fuse returned to normal state.\n", qpti->qpti_id);
drivers/scsi/qlogicpti.c
659
printk("qlogicpti%d: termpwr back to normal state.\n", qpti->qpti_id);
drivers/scsi/qlogicpti.c
664
printk("qlogicpti%d: Fuse is open!\n", qpti->qpti_id);
drivers/scsi/qlogicpti.c
668
printk("qlogicpti%d: termpwr failure\n", qpti->qpti_id);
drivers/scsi/qlogicpti.c
673
printk("qlogicpti%d: You have a single ended device on a "
drivers/scsi/qlogicpti.c
723
printk("PTI: Qlogic/ISP registers are unmappable\n");
drivers/scsi/qlogicpti.c
731
printk("PTI: Qlogic/ISP status register is unmappable\n");
drivers/scsi/qlogicpti.c
754
printk("qlogicpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
drivers/scsi/qlogicpti.c
759
printk("qlogicpti%d: Cannot acquire irq line\n", qpti->qpti_id);
drivers/scsi/qlogicpti.c
781
printk("SCSI ID %d ", qpti->scsi_id);
drivers/scsi/qlogicpti.c
827
printk("QPTI: Cannot map response queue.\n");
drivers/scsi/qlogicpti.c
838
printk("QPTI: Cannot map request queue.\n");
drivers/scsi/scsi.c
1048
printk(KERN_NOTICE "SCSI subsystem initialized\n");
drivers/scsi/scsi.c
1061
printk(KERN_ERR "SCSI subsystem failed to initialize, error = %d\n",
drivers/scsi/scsi_devinfo.c
302
printk(KERN_WARNING "%s: %s string '%s' is too long\n",
drivers/scsi/scsi_devinfo.c
361
printk(KERN_ERR "%s: no memory\n", __func__);
drivers/scsi/scsi_dh.c
211
printk(KERN_INFO "%s: device handler registered\n", scsi_dh->name);
drivers/scsi/scsi_dh.c
232
printk(KERN_INFO "%s: device handler unregistered\n", scsi_dh->name);
drivers/scsi/scsi_ioctl.c
899
printk(KERN_WARNING "program %s is using a deprecated SCSI "
drivers/scsi/scsi_lib.c
3232
printk(KERN_ERR "%s: Bytes in sg: %zu, requested offset %zu, "
drivers/scsi/scsi_netlink.c
122
printk(KERN_ERR "%s: register of receive handler failed\n",
drivers/scsi/scsi_netlink.c
45
printk(KERN_WARNING "%s: discarding partial skb\n",
drivers/scsi/scsi_netlink.c
72
printk(KERN_WARNING "%s: discarding partial message\n",
drivers/scsi/scsi_netlink.c
92
printk(KERN_WARNING "%s: Msgtype %d failed - err %d\n",
drivers/scsi/scsi_proc.c
175
printk(KERN_ERR "%s: proc_mkdir failed for %s\n", __func__,
drivers/scsi/scsi_scan.c
1517
printk(ALLOC_FAILURE_MSG, __func__);
drivers/scsi/scsi_scan.c
176
printk(KERN_INFO "scsi: waiting for bus probes to complete ...\n");
drivers/scsi/scsi_scan.c
387
printk(ALLOC_FAILURE_MSG, __func__);
drivers/scsi/scsi_scan.c
507
printk(KERN_ERR "%s: allocation failure\n", __func__);
drivers/scsi/scsi_transport_fc.c
2826
printk(KERN_ERR
drivers/scsi/scsi_transport_fc.c
2845
printk(KERN_ERR
drivers/scsi/scsi_transport_fc.c
2870
printk(KERN_ERR
drivers/scsi/scsi_transport_fc.c
2890
printk(KERN_ERR
drivers/scsi/scsi_transport_fc.c
3103
printk(KERN_ERR "%s: allocation failure\n", __func__);
drivers/scsi/scsi_transport_fc.c
3142
printk(KERN_ERR "FC Remote Port alloc_workqueue failed\n");
drivers/scsi/scsi_transport_fc.c
3165
printk(KERN_ERR "FC Remote Port device_add failed\n");
drivers/scsi/scsi_transport_fc.c
3902
printk(KERN_ERR "%s: allocation failure\n", __func__);
drivers/scsi/scsi_transport_fc.c
3943
printk(KERN_ERR "FC Virtual Port device_add failed\n");
drivers/scsi/scsi_transport_fc.c
3951
printk(KERN_ERR "FC Virtual Port LLDD Create failed\n");
drivers/scsi/scsi_transport_fc.c
3963
printk(KERN_ERR
drivers/scsi/scsi_transport_fc.c
4124
printk(KERN_ERR "ERROR: FC BSG request timeout - LLD "
drivers/scsi/scsi_transport_fc.c
584
printk(KERN_WARNING
drivers/scsi/scsi_transport_iscsi.c
223
printk(KERN_ERR "Could not allocate endpoint ID. Error %d.\n",
drivers/scsi/scsi_transport_iscsi.c
2592
printk(KERN_ERR "can not deliver iscsi offload message:OOM\n");
drivers/scsi/scsi_transport_iscsi.c
2721
printk(KERN_ERR "gracefully ignored host event (%d):%d OOM\n",
drivers/scsi/scsi_transport_iscsi.c
2752
printk(KERN_ERR "gracefully ignored ping comp: OOM\n");
drivers/scsi/scsi_transport_iscsi.c
2779
printk(KERN_ERR "Could not allocate skb to send reply.\n");
drivers/scsi/scsi_transport_iscsi.c
2955
printk(KERN_ERR "iscsi: invalid session %d.\n",
drivers/scsi/scsi_transport_iscsi.c
3046
printk(KERN_ERR "ep connect failed. Could not find "
drivers/scsi/scsi_transport_iscsi.c
3151
printk(KERN_ERR "target discovery could not find host no %u\n",
drivers/scsi/scsi_transport_iscsi.c
3181
printk(KERN_ERR "set_host_param could not find host no %u\n",
drivers/scsi/scsi_transport_iscsi.c
3214
printk(KERN_ERR "set path could not find host no %u\n",
drivers/scsi/scsi_transport_iscsi.c
3257
printk(KERN_ERR "set_iface_params could not find host no %u\n",
drivers/scsi/scsi_transport_iscsi.c
3282
printk(KERN_ERR "iscsi_ping could not find host no %u\n",
drivers/scsi/scsi_transport_iscsi.c
3323
printk(KERN_ERR "%s: failed. Could not find host no %u\n",
drivers/scsi/scsi_transport_iscsi.c
3333
printk(KERN_ERR "can not deliver chap: OOM\n");
drivers/scsi/scsi_transport_iscsi.c
3399
printk(KERN_ERR "%s could not find host no %u\n",
drivers/scsi/scsi_transport_iscsi.c
4098
printk(KERN_WARNING "Send reply failed, error %d\n", err);
drivers/scsi/scsi_transport_iscsi.c
4891
printk(KERN_NOTICE "iscsi: registered transport (%s)\n", tt->name);
drivers/scsi/scsi_transport_iscsi.c
4950
printk(KERN_INFO "Loading iSCSI transport class v%s.\n",
drivers/scsi/scsi_transport_sas.c
1187
printk(KERN_ERR "%s: Cannot create port backlink, err=%d\n",
drivers/scsi/scsi_transport_sas.c
1588
printk("fail to a bsg device %s\n", dev_name(&rphy->dev));
drivers/scsi/scsi_transport_sas.c
196
printk("%s can't handle SMP requests\n", shost->hostt->name);
drivers/scsi/scsi_transport_sas.c
911
printk(KERN_ERR "%s: Cannot create port links, err=%d\n",
drivers/scsi/scsi_transport_spi.c
1271
printk("period = %s ns ", buf);
drivers/scsi/scsi_transport_spi.c
1275
printk("offset = %d ", msg[off]);
drivers/scsi/scsi_transport_spi.c
1277
printk("width = %d ", 8 << msg[width]);
drivers/scsi/scsi_transport_spi.c
1284
printk("%s = %d ", desc, ptr);
drivers/scsi/scsi_transport_spi.c
1295
printk ("%s ", extended_msgs[msg[2]]);
drivers/scsi/scsi_transport_spi.c
1297
printk ("Extended Message, reserved code (0x%02x) ",
drivers/scsi/scsi_transport_spi.c
1318
printk("%02x ", msg[i]);
drivers/scsi/scsi_transport_spi.c
1322
printk("Identify disconnect %sallowed %s %d ",
drivers/scsi/scsi_transport_spi.c
1329
printk("%s ", one_byte_msgs[msg[0]]);
drivers/scsi/scsi_transport_spi.c
1331
printk("reserved (%02x) ", msg[0]);
drivers/scsi/scsi_transport_spi.c
1333
printk("QAS Request ");
drivers/scsi/scsi_transport_spi.c
1337
printk("%s %02x ", two_byte_msgs[msg[0] - 0x20],
drivers/scsi/scsi_transport_spi.c
1340
printk("reserved two byte (%02x %02x) ",
drivers/scsi/scsi_transport_spi.c
1344
printk("reserved ");
drivers/scsi/scsi_transport_spi.c
1360
printk("%02x ", msg[i]);
drivers/scsi/scsi_transport_spi.c
1363
printk("%02x ", msg[0]);
drivers/scsi/scsi_transport_spi.c
1366
printk("%02x ", msg[0]);
drivers/scsi/scsi_transport_spi.c
1369
printk("%02x %02x", msg[0], msg[1]);
drivers/scsi/scsi_transport_spi.c
1372
printk("%02x ", msg[0]);
drivers/scsi/scsicam.c
116
printk("scsicam_bios_param : logical_end=%d physical_end=%d ext_physical_end=%d ext_cyl=%d\n"
drivers/scsi/scsicam.c
130
printk("scsicam_bios_param : logical (%u) != physical (%u)\n",
drivers/scsi/scsicam.c
79
printk("scsicam_bios_param : partition %d has system \n",
drivers/scsi/scsicam.c
98
printk("scsicam_bios_param : end at h = %d, c = %d, s = %d\n",
drivers/scsi/sd.c
129
printk(KERN_ERR "sd: can't create large page mempool\n");
drivers/scsi/sd.c
2590
printk(KERN_CONT ".");
drivers/scsi/sd.c
2620
printk(KERN_CONT "ready\n");
drivers/scsi/sd.c
2622
printk(KERN_CONT "not responding...\n");
drivers/scsi/sd.c
4441
SCSI_LOG_HLQUEUE(3, printk("init_sd: sd driver entry point\n"));
drivers/scsi/sd.c
4458
printk(KERN_ERR "sd: can't init discard page pool\n");
drivers/scsi/sd.c
4488
SCSI_LOG_HLQUEUE(3, printk("exit_sd: exiting sd driver\n"));
drivers/scsi/sgiwd93.c
248
printk(KERN_WARNING "sgiwd93: Could not allocate memory for "
drivers/scsi/sgiwd93.c
267
printk(KERN_WARNING "sgiwd93: Could not register irq %d "
drivers/scsi/sim710.c
102
printk(KERN_ERR "sim710: Failed to reserve IO region 0x%lx\n",
drivers/scsi/sim710.c
117
printk(KERN_ERR "sim710: No host detected; card configuration problem?\n");
drivers/scsi/sim710.c
124
printk(KERN_ERR "sim710: request_irq failed\n");
drivers/scsi/sim710.c
187
printk(KERN_ERR "sim710.c, EISA card %s has incorrect scsi_id, setting to 7\n", dev_name(dev));
drivers/scsi/sim710.c
196
printk("sim710.c: irq nasty\n");
drivers/scsi/sim710.c
63
printk(KERN_WARNING "sim710: Must specify slot for id parameter\n");
drivers/scsi/sim710.c
65
printk(KERN_WARNING "sim710: Illegal slot %d for id %d\n", slot, val);
drivers/scsi/sim710.c
92
printk(KERN_NOTICE "sim710: %s\n", dev_name(dev));
drivers/scsi/sim710.c
93
printk(KERN_NOTICE "sim710: irq = %d, clock = %d, base = 0x%lx, scsi_id = %d\n",
drivers/scsi/sim710.c
97
printk(KERN_ERR "sim710: Failed to allocate host data\n");
drivers/scsi/sni_53c710.c
90
printk(KERN_ERR "snirm710: request_irq failed!\n");
drivers/scsi/st.c
3978
printk(KERN_NOTICE "st: Can't allocate new tape buffer.\n");
drivers/scsi/st.c
4096
printk(KERN_WARNING "st: append_to_buffer offset overflow.\n");
drivers/scsi/st.c
4128
printk(KERN_WARNING "st: from_buffer offset overflow.\n");
drivers/scsi/st.c
4223
printk(KERN_WARNING "st: Obsolete parameter %s\n",
drivers/scsi/st.c
4229
printk(KERN_WARNING "st: invalid parameter in '%s'\n",
drivers/scsi/st.c
4556
printk(KERN_INFO "st: Version %s, fixed bufsize %d, s/g segs %d\n",
drivers/scsi/st.c
4561
printk(KERN_INFO "st: Debugging enabled debug_flag = %d\n",
drivers/scsi/st.c
4574
printk(KERN_ERR "Unable to get major %d for SCSI tapes\n",
drivers/scsi/st.c
4600
printk(KERN_INFO "st: Unloaded.\n");
drivers/scsi/stex.c
1039
printk(KERN_ERR DRV_NAME
drivers/scsi/stex.c
1089
printk(KERN_ERR DRV_NAME
drivers/scsi/stex.c
1125
printk(KERN_ERR DRV_NAME
drivers/scsi/stex.c
1137
printk(KERN_ERR DRV_NAME
drivers/scsi/stex.c
1190
printk(KERN_ERR DRV_NAME
drivers/scsi/stex.c
1203
printk(KERN_ERR DRV_NAME
drivers/scsi/stex.c
1293
printk(KERN_WARNING DRV_NAME
drivers/scsi/stex.c
1359
printk(KERN_WARNING DRV_NAME
drivers/scsi/stex.c
1399
printk(KERN_INFO DRV_NAME "(%s): request reset during init\n",
drivers/scsi/stex.c
1435
printk(KERN_WARNING DRV_NAME "(%s): resetting: handshake failed\n",
drivers/scsi/stex.c
1625
printk(KERN_ERR DRV_NAME
drivers/scsi/stex.c
1673
printk(KERN_ERR DRV_NAME "(%s): scsi_host_alloc failed\n",
drivers/scsi/stex.c
1684
printk(KERN_ERR DRV_NAME "(%s): request regions failed\n",
drivers/scsi/stex.c
1691
printk(KERN_ERR DRV_NAME "(%s): memory map failed\n",
drivers/scsi/stex.c
1701
printk(KERN_ERR DRV_NAME "(%s): set dma mask failed\n",
drivers/scsi/stex.c
1743
printk(KERN_WARNING DRV_NAME
drivers/scsi/stex.c
1754
printk(KERN_ERR DRV_NAME "(%s): dma mem alloc failed\n",
drivers/scsi/stex.c
1763
printk(KERN_ERR DRV_NAME "(%s): ccb alloc failed\n",
drivers/scsi/stex.c
1800
printk(KERN_ERR DRV_NAME "(%s): create workqueue failed\n",
drivers/scsi/stex.c
1809
printk(KERN_ERR DRV_NAME "(%s): request irq failed\n",
drivers/scsi/stex.c
1822
printk(KERN_ERR DRV_NAME "(%s): scsi_add_host failed\n",
drivers/scsi/stex.c
2017
printk(KERN_INFO DRV_NAME
drivers/scsi/stex.c
810
printk(KERN_WARNING DRV_NAME "(%s): invalid status head\n",
drivers/scsi/stex.c
834
printk(KERN_WARNING DRV_NAME
drivers/scsi/stex.c
844
printk(KERN_WARNING DRV_NAME
drivers/scsi/stex.c
852
printk(KERN_WARNING DRV_NAME "(%s): bad status size\n",
drivers/scsi/stex.c
939
printk(KERN_WARNING DRV_NAME
drivers/scsi/stex.c
949
printk(KERN_WARNING DRV_NAME
drivers/scsi/stex.c
964
printk(KERN_WARNING DRV_NAME
drivers/scsi/sun3_scsi.c
423
printk("sun3scsi: fifo failed to empty!\n");
drivers/scsi/sun3x_esp.c
114
printk(KERN_ALERT PFX "esp%d: DMA will not "
drivers/scsi/sun3x_esp.c
98
printk(KERN_ALERT PFX "esp%d: DMA will not drain!\n",
drivers/scsi/sun_esp.c
268
printk(KERN_ALERT PFX "esp%d: DMA_PEND_READ "
drivers/scsi/sun_esp.c
339
printk(KERN_ALERT PFX "esp%d: DMA will not drain!\n",
drivers/scsi/sun_esp.c
371
printk(KERN_ALERT PFX "esp%d: DMA will not "
drivers/scsi/sym53c8xx_2/sym_glue.c
106
printk(KERN_WARNING NAME53C8XX "Ignoring parameter %s"
drivers/scsi/sym53c8xx_2/sym_glue.c
1101
printk("sym_user_command: arg_len=%d, cmd=%ld\n", arg_len, uc->cmd);
drivers/scsi/sym53c8xx_2/sym_glue.c
1123
printk("sym_user_command: target=%ld\n", target);
drivers/scsi/sym53c8xx_2/sym_glue.c
1137
printk("sym_user_command: data=%ld\n", uc->data);
drivers/scsi/sym53c8xx_2/sym_glue.c
1171
printk("sym_user_command: data=%ld\n", uc->data);
drivers/scsi/sym53c8xx_2/sym_glue.c
1292
printk(KERN_INFO "sym%d: <%s> rev 0x%x at pci %s irq %u\n",
drivers/scsi/sym53c8xx_2/sym_glue.c
1658
printk("%s: detaching ...\n", sym_name(np));
drivers/scsi/sym53c8xx_2/sym_glue.c
1667
printk("%s: resetting chip\n", sym_name(np));
drivers/scsi/sym53c8xx_2/sym_glue.c
1859
printk(KERN_INFO "%s: recovering from a PCI slot reset\n",
drivers/scsi/sym53c8xx_2/sym_glue.c
1863
printk(KERN_ERR "%s: Unable to enable after PCI reset\n",
drivers/scsi/sym53c8xx_2/sym_glue.c
1883
printk(KERN_ERR "%s: Unable to reset scsi host\n",
drivers/scsi/sym53c8xx_2/sym_glue.c
440
printk("%s: command processing resumed\n",
drivers/scsi/sym53c8xx_2/sym_glue.h
65
#define printf_emerg(args...) printk(KERN_EMERG args)
drivers/scsi/sym53c8xx_2/sym_glue.h
66
#define printf_alert(args...) printk(KERN_ALERT args)
drivers/scsi/sym53c8xx_2/sym_glue.h
67
#define printf_crit(args...) printk(KERN_CRIT args)
drivers/scsi/sym53c8xx_2/sym_glue.h
68
#define printf_err(args...) printk(KERN_ERR args)
drivers/scsi/sym53c8xx_2/sym_glue.h
69
#define printf_warning(args...) printk(KERN_WARNING args)
drivers/scsi/sym53c8xx_2/sym_glue.h
70
#define printf_notice(args...) printk(KERN_NOTICE args)
drivers/scsi/sym53c8xx_2/sym_glue.h
71
#define printf_info(args...) printk(KERN_INFO args)
drivers/scsi/sym53c8xx_2/sym_glue.h
72
#define printf_debug(args...) printk(KERN_DEBUG args)
drivers/scsi/sym53c8xx_2/sym_glue.h
73
#define printf(args...) printk(args)
drivers/scsi/vmw_pvscsi.c
1040
printk(KERN_INFO "vmw_pvscsi: msg type: 0x%x - MSG RING: %u/%u (%u) \n",
drivers/scsi/vmw_pvscsi.c
1049
printk(KERN_INFO
drivers/scsi/vmw_pvscsi.c
1059
printk(KERN_INFO "vmw_pvscsi: device already exists\n");
drivers/scsi/vmw_pvscsi.c
1070
printk(KERN_INFO
drivers/scsi/vmw_pvscsi.c
1083
printk(KERN_INFO
drivers/scsi/vmw_pvscsi.c
1143
printk(KERN_ERR "vmw_pvscsi: failed to create work queue\n");
drivers/scsi/vmw_pvscsi.c
1163
printk(KERN_INFO "vmw_pvscsi: device does not support req_threshold\n");
drivers/scsi/vmw_pvscsi.c
1168
printk(KERN_INFO
drivers/scsi/vmw_pvscsi.c
1364
printk(KERN_INFO "vmw_pvscsi: using 64bit dma\n");
drivers/scsi/vmw_pvscsi.c
1366
printk(KERN_INFO "vmw_pvscsi: using 32bit dma\n");
drivers/scsi/vmw_pvscsi.c
1368
printk(KERN_ERR "vmw_pvscsi: failed to set DMA mask\n");
drivers/scsi/vmw_pvscsi.c
1383
printk(KERN_ERR "vmw_pvscsi: pci memory selection failed\n");
drivers/scsi/vmw_pvscsi.c
1398
printk(KERN_ERR
drivers/scsi/vmw_pvscsi.c
1406
printk(KERN_ERR
drivers/scsi/vmw_pvscsi.c
1419
printk(KERN_INFO "vmw_pvscsi: max_id: %u\n", max_id);
drivers/scsi/vmw_pvscsi.c
1429
printk(KERN_INFO
drivers/scsi/vmw_pvscsi.c
1440
printk(KERN_ERR "vmw_pvscsi: failed to allocate host\n");
drivers/scsi/vmw_pvscsi.c
1471
printk(KERN_ERR "vmw_pvscsi: unable to allocate ring memory\n");
drivers/scsi/vmw_pvscsi.c
1483
printk(KERN_ERR "vmw_pvscsi: failed to allocate memory.\n");
drivers/scsi/vmw_pvscsi.c
1496
printk(KERN_ERR "vmw_pvscsi: unable to allocate s/g table\n");
drivers/scsi/vmw_pvscsi.c
1510
printk(KERN_DEBUG "vmw_pvscsi: driver-based request coalescing %sabled\n",
drivers/scsi/vmw_pvscsi.c
1514
printk(KERN_INFO "vmw_pvscsi: using MSI%s\n",
drivers/scsi/vmw_pvscsi.c
1519
printk(KERN_INFO "vmw_pvscsi: using INTx\n");
drivers/scsi/vmw_pvscsi.c
1525
printk(KERN_ERR
drivers/scsi/vmw_pvscsi.c
1532
printk(KERN_ERR
drivers/scsi/wd33c93.c
1043
printk(" sync_xfer=%02x\n",
drivers/scsi/wd33c93.c
1054
printk("sending WDTR ");
drivers/scsi/wd33c93.c
1068
printk
drivers/scsi/wd33c93.c
1092
printk("Rejecting Unknown Message(%02x) ", msg);
drivers/scsi/wd33c93.c
1112
DB(DB_INTR, printk("SX-DONE"))
drivers/scsi/wd33c93.c
1115
DB(DB_INTR, printk(":%d.%d", scsi_pointer->Status, lun))
drivers/scsi/wd33c93.c
1137
printk
drivers/scsi/wd33c93.c
1147
DB(DB_INTR, printk("SDP"))
drivers/scsi/wd33c93.c
1157
DB(DB_INTR, printk("MSG_OUT="))
drivers/scsi/wd33c93.c
1177
DB(DB_INTR, printk("%02x", hostdata->outgoing_msg[0]))
drivers/scsi/wd33c93.c
1199
printk(" - Already disconnected! ");
drivers/scsi/wd33c93.c
1204
DB(DB_INTR, printk("UNEXP_DISC"))
drivers/scsi/wd33c93.c
1233
DB(DB_INTR, printk("DISC"))
drivers/scsi/wd33c93.c
1235
printk(" - Already disconnected! ");
drivers/scsi/wd33c93.c
1243
DB(DB_INTR, printk(":%d", scsi_pointer->Status))
drivers/scsi/wd33c93.c
1267
printk("*** Unexpected DISCONNECT interrupt! ***");
drivers/scsi/wd33c93.c
1280
DB(DB_INTR, printk("RESEL%s", sr == CSR_RESEL_AM ? "_AM" : ""))
drivers/scsi/wd33c93.c
1311
printk
drivers/scsi/wd33c93.c
1315
printk("\r");
drivers/scsi/wd33c93.c
1344
printk
drivers/scsi/wd33c93.c
1362
printk
drivers/scsi/wd33c93.c
1369
printk
drivers/scsi/wd33c93.c
1376
printk
drivers/scsi/wd33c93.c
1398
printk
drivers/scsi/wd33c93.c
1436
printk("--UNKNOWN INTERRUPT:%02x:%02x:%02x--", asr, sr, phs);
drivers/scsi/wd33c93.c
1440
DB(DB_INTR, printk("} "))
drivers/scsi/wd33c93.c
1521
printk("scsi%d: reset. ", instance->host_no);
drivers/scsi/wd33c93.c
1578
printk
drivers/scsi/wd33c93.c
1604
printk("scsi%d: Aborting connected command - ",
drivers/scsi/wd33c93.c
1607
printk("stopping DMA - ");
drivers/scsi/wd33c93.c
1613
printk("sending wd33c93 ABORT command - ");
drivers/scsi/wd33c93.c
1620
printk("flushing fifo - ");
drivers/scsi/wd33c93.c
1628
printk
drivers/scsi/wd33c93.c
1638
printk("sending wd33c93 DISCONNECT command - ");
drivers/scsi/wd33c93.c
1646
printk("asr=%02x, sr=%02x.", asr, sr);
drivers/scsi/wd33c93.c
1670
printk
drivers/scsi/wd33c93.c
1673
printk("Abort SNOOZE. ");
drivers/scsi/wd33c93.c
1694
printk("scsi%d: warning : SCSI command probably completed successfully"
drivers/scsi/wd33c93.c
1977
printk("wd33c93-%d: chip=%s/%d no_sync=0x%x no_dma=%d",
drivers/scsi/wd33c93.c
1985
printk(" debug_flags=0x%02x\n", hostdata->args);
drivers/scsi/wd33c93.c
1987
printk(" debugging=OFF\n");
drivers/scsi/wd33c93.c
1989
printk(" setup_args=");
drivers/scsi/wd33c93.c
1991
printk("%s,", setup_args[i]);
drivers/scsi/wd33c93.c
1992
printk("\n");
drivers/scsi/wd33c93.c
1993
printk(" Version %s - %s\n", WD33C93_VERSION, WD33C93_DATE);
drivers/scsi/wd33c93.c
314
printk("Q-%d-%02x( ", cmd->device->id, cmd->cmnd[0]))
drivers/scsi/wd33c93.c
393
DB(DB_QUEUE_COMMAND, printk(")Q "))
drivers/scsi/wd33c93.c
420
DB(DB_EXECUTE, printk("EX("))
drivers/scsi/wd33c93.c
422
DB(DB_EXECUTE, printk(")EX-0 "))
drivers/scsi/wd33c93.c
444
DB(DB_EXECUTE, printk(")EX-1 "))
drivers/scsi/wd33c93.c
621
printk("%s)EX-2 ", scsi_pointer->phase ? "d:" : ""))
drivers/scsi/wd33c93.c
631
printk("(%p,%d,%s:", buf, cnt, data_in_dir ? "in" : "out"))
drivers/scsi/wd33c93.c
759
DB(DB_INTR, printk("{%02x:%02x-", asr, sr))
drivers/scsi/wd33c93.c
777
printk("[%p/%d:", scsi_pointer->ptr, scsi_pointer->this_residual))
drivers/scsi/wd33c93.c
784
printk("%p/%d]", scsi_pointer->ptr, scsi_pointer->this_residual))
drivers/scsi/wd33c93.c
790
DB(DB_INTR, printk("TIMEOUT"))
drivers/scsi/wd33c93.c
826
DB(DB_INTR, printk("SELECT"))
drivers/scsi/wd33c93.c
862
printk(" sending SDTR %02x03%02x%02x%02x ",
drivers/scsi/wd33c93.c
876
printk("IN-%d.%d", scsi_pointer->this_residual,
drivers/scsi/wd33c93.c
888
printk("OUT-%d.%d", scsi_pointer->this_residual,
drivers/scsi/wd33c93.c
901
DB(DB_INTR, printk("CMND-%02x", cmd->cmnd[0]))
drivers/scsi/wd33c93.c
911
DB(DB_INTR, printk("STATUS="))
drivers/scsi/wd33c93.c
913
DB(DB_INTR, printk("%02x", scsi_pointer->Status))
drivers/scsi/wd33c93.c
929
DB(DB_INTR, printk("MSG_IN="))
drivers/scsi/wd33c93.c
945
DB(DB_INTR, printk("CCMP"))
drivers/scsi/wd33c93.c
951
DB(DB_INTR, printk("SDP"))
drivers/scsi/wd33c93.c
957
DB(DB_INTR, printk("RDP"))
drivers/scsi/wd33c93.c
969
DB(DB_INTR, printk("DIS"))
drivers/scsi/wd33c93.c
976
DB(DB_INTR, printk("REJ"))
drivers/scsi/wd33c93.c
978
printk("-REJ-");
drivers/scsi/wd33c93.c
992
DB(DB_INTR, printk("EXT"))
drivers/scsi/wd33c93.c
997
printk("%02x", ucp[hostdata->incoming_ptr]);
drivers/scsi/zalon.c
113
printk(KERN_INFO "%s: Zalon version %d, IRQ %d\n", __func__,
drivers/scsi/zalon.c
119
printk(KERN_WARNING "%s: Zalon 1.1 or earlier\n", __func__);
drivers/scsi/zalon.c
72
printk(KERN_WARNING "%s: pdc_iodc_read returned %d\n", __func__, status);
drivers/scsi/zalon.c
76
printk(KERN_DEBUG "%s: SCSI clock %d\n", __func__, clock);
drivers/scsi/zorro7xx.c
100
printk(KERN_ERR "zorro7xx: Failed to allocate host data\n");
drivers/scsi/zorro7xx.c
122
printk(KERN_ERR "zorro7xx: No host detected; "
drivers/scsi/zorro7xx.c
133
printk(KERN_ERR "zorro7xx: request_irq failed\n");
drivers/scsi/zorro7xx.c
93
printk(KERN_ERR "zorro7xx: cannot reserve region 0x%lx, abort\n",
drivers/sh/maple/maple.c
884
printk(KERN_ERR "Maple bus registration failed\n");
drivers/soc/fsl/qe/qe.c
414
printk(KERN_INFO "qe-firmware: "
drivers/soc/fsl/qe/qe.c
418
printk(KERN_INFO "qe-firmware: "
drivers/soc/fsl/qe/qe.c
459
printk(KERN_ERR "qe-firmware: invalid pointer\n");
drivers/soc/fsl/qe/qe.c
469
printk(KERN_ERR "qe-firmware: not a microcode\n");
drivers/soc/fsl/qe/qe.c
475
printk(KERN_ERR "qe-firmware: unsupported version\n");
drivers/soc/fsl/qe/qe.c
481
printk(KERN_ERR "qe-firmware: invalid data\n");
drivers/soc/fsl/qe/qe.c
499
printk(KERN_ERR "qe-firmware: invalid length\n");
drivers/soc/fsl/qe/qe.c
506
printk(KERN_ERR "qe-firmware: firmware CRC is invalid\n");
drivers/soc/fsl/qe/qe.c
517
printk(KERN_INFO
drivers/soc/fsl/qe/qe.c
522
printk(KERN_INFO "qe-firmware: firmware '%s'\n",
drivers/soc/fsl/qe/qe_ic.c
309
printk(KERN_ERR "Can't map reserved IRQ\n");
drivers/soc/fsl/qe/qe_io.c
149
printk(KERN_ERR "par_io not initialized\n");
drivers/soc/fsl/qe/qe_io.c
155
printk(KERN_ERR "pio-handle not available\n");
drivers/soc/fsl/qe/qe_io.c
161
printk(KERN_ERR "pio-map is not set!\n");
drivers/soc/fsl/qe/qe_io.c
166
printk(KERN_ERR "pio-map format wrong!\n");
drivers/soc/fsl/qe/ucc_fast.c
147
printk(KERN_ERR "%s: illegal UCC number\n", __func__);
drivers/soc/fsl/qe/ucc_fast.c
153
printk(KERN_ERR "%s: max_rx_buf_length not aligned\n",
drivers/soc/fsl/qe/ucc_fast.c
160
printk(KERN_ERR "%s: urfs is too small\n", __func__);
drivers/soc/fsl/qe/ucc_fast.c
165
printk(KERN_ERR "%s: urfs is not aligned\n", __func__);
drivers/soc/fsl/qe/ucc_fast.c
170
printk(KERN_ERR "%s: urfet is not aligned.\n", __func__);
drivers/soc/fsl/qe/ucc_fast.c
175
printk(KERN_ERR "%s: urfset is not aligned\n", __func__);
drivers/soc/fsl/qe/ucc_fast.c
180
printk(KERN_ERR "%s: utfs is not aligned\n", __func__);
drivers/soc/fsl/qe/ucc_fast.c
185
printk(KERN_ERR "%s: utfet is not aligned\n", __func__);
drivers/soc/fsl/qe/ucc_fast.c
190
printk(KERN_ERR "%s: utftt is not aligned\n", __func__);
drivers/soc/fsl/qe/ucc_fast.c
196
printk(KERN_ERR "%s: Cannot allocate private data\n",
drivers/soc/fsl/qe/ucc_fast.c
208
printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
drivers/soc/fsl/qe/ucc_fast.c
232
printk(KERN_ERR "%s: cannot set UCC type\n", __func__);
drivers/soc/fsl/qe/ucc_fast.c
271
printk(KERN_ERR "%s: cannot allocate MURAM for TX FIFO\n",
drivers/soc/fsl/qe/ucc_fast.c
28
printk(KERN_INFO "UCC%u Fast registers:\n", uccf->uf_info->ucc_num);
drivers/soc/fsl/qe/ucc_fast.c
283
printk(KERN_ERR "%s: cannot allocate MURAM for RX FIFO\n",
drivers/soc/fsl/qe/ucc_fast.c
29
printk(KERN_INFO "Base address: 0x%p\n", uccf->uf_regs);
drivers/soc/fsl/qe/ucc_fast.c
31
printk(KERN_INFO "gumr : addr=0x%p, val=0x%08x\n",
drivers/soc/fsl/qe/ucc_fast.c
315
printk(KERN_ERR "%s: illegal value for RX clock\n",
drivers/soc/fsl/qe/ucc_fast.c
324
printk(KERN_ERR "%s: illegal value for TX clock\n",
drivers/soc/fsl/qe/ucc_fast.c
33
printk(KERN_INFO "upsmr : addr=0x%p, val=0x%08x\n",
drivers/soc/fsl/qe/ucc_fast.c
35
printk(KERN_INFO "utodr : addr=0x%p, val=0x%04x\n",
drivers/soc/fsl/qe/ucc_fast.c
37
printk(KERN_INFO "udsr : addr=0x%p, val=0x%04x\n",
drivers/soc/fsl/qe/ucc_fast.c
39
printk(KERN_INFO "ucce : addr=0x%p, val=0x%08x\n",
drivers/soc/fsl/qe/ucc_fast.c
41
printk(KERN_INFO "uccm : addr=0x%p, val=0x%08x\n",
drivers/soc/fsl/qe/ucc_fast.c
43
printk(KERN_INFO "uccs : addr=0x%p, val=0x%02x\n",
drivers/soc/fsl/qe/ucc_fast.c
45
printk(KERN_INFO "urfb : addr=0x%p, val=0x%08x\n",
drivers/soc/fsl/qe/ucc_fast.c
47
printk(KERN_INFO "urfs : addr=0x%p, val=0x%04x\n",
drivers/soc/fsl/qe/ucc_fast.c
49
printk(KERN_INFO "urfet : addr=0x%p, val=0x%04x\n",
drivers/soc/fsl/qe/ucc_fast.c
51
printk(KERN_INFO "urfset: addr=0x%p, val=0x%04x\n",
drivers/soc/fsl/qe/ucc_fast.c
54
printk(KERN_INFO "utfb : addr=0x%p, val=0x%08x\n",
drivers/soc/fsl/qe/ucc_fast.c
56
printk(KERN_INFO "utfs : addr=0x%p, val=0x%04x\n",
drivers/soc/fsl/qe/ucc_fast.c
58
printk(KERN_INFO "utfet : addr=0x%p, val=0x%04x\n",
drivers/soc/fsl/qe/ucc_fast.c
60
printk(KERN_INFO "utftt : addr=0x%p, val=0x%04x\n",
drivers/soc/fsl/qe/ucc_fast.c
62
printk(KERN_INFO "utpt : addr=0x%p, val=0x%04x\n",
drivers/soc/fsl/qe/ucc_fast.c
64
printk(KERN_INFO "urtry : addr=0x%p, val=0x%08x\n",
drivers/soc/fsl/qe/ucc_fast.c
66
printk(KERN_INFO "guemr : addr=0x%p, val=0x%02x\n",
drivers/soc/fsl/qe/ucc_slow.c
135
printk(KERN_ERR "%s: illegal UCC number\n", __func__);
drivers/soc/fsl/qe/ucc_slow.c
147
printk(KERN_ERR "max_rx_buf_length not aligned.\n");
drivers/soc/fsl/qe/ucc_slow.c
153
printk(KERN_ERR "%s: Cannot allocate private data\n",
drivers/soc/fsl/qe/ucc_slow.c
166
printk(KERN_ERR "%s: Cannot map UCC registers\n", __func__);
drivers/soc/fsl/qe/ucc_slow.c
179
printk(KERN_ERR "%s: cannot allocate MURAM for PRAM", __func__);
drivers/soc/fsl/qe/ucc_slow.c
192
printk(KERN_ERR "%s: cannot set UCC type", __func__);
drivers/soc/fsl/qe/ucc_slow.c
206
printk(KERN_ERR "%s: cannot allocate %u RX BDs\n", __func__,
drivers/soc/fsl/qe/ucc_slow.c
216
printk(KERN_ERR "%s: cannot allocate TX BDs", __func__);
drivers/soc/fsl/qe/ucc_slow.c
304
printk(KERN_ERR "%s: illegal value for RX clock\n",
drivers/soc/fsl/qe/ucc_slow.c
312
printk(KERN_ERR "%s: illegal value for TX clock\n",
drivers/soc/ixp4xx/ixp4xx-npe.c
128
printk(pri "%s: " fmt, npe_name(npe), ## __VA_ARGS__)
drivers/soc/ixp4xx/ixp4xx-qmgr.c
302
printk(KERN_ERR "qmgr: no free SRAM space for"
drivers/soc/ixp4xx/ixp4xx-qmgr.c
317
printk(KERN_DEBUG "qmgr: requested queue %s(%i) addr = 0x%02X\n",
drivers/soc/ixp4xx/ixp4xx-qmgr.c
34
printk(KERN_DEBUG "Queue %s(%i) put %X\n",
drivers/soc/ixp4xx/ixp4xx-qmgr.c
354
printk(KERN_DEBUG "qmgr: releasing queue %s(%i)\n",
drivers/soc/ixp4xx/ixp4xx-qmgr.c
360
printk(KERN_ERR "qmgr: released queue %i not empty: 0x%08X\n",
drivers/soc/ixp4xx/ixp4xx-qmgr.c
47
printk(KERN_DEBUG "Queue %s(%i) get %X\n",
drivers/soc/samsung/s3c-pm-check.c
101
printk(KERN_ERR "Cannot allocated CRC save area\n");
drivers/soc/samsung/s3c-pm-check.c
194
printk(KERN_ERR "Restore CRC error at "
drivers/spi/spi-au1550.c
967
printk(KERN_ERR "au1550-spi: cannot add memory dbdma device\n");
drivers/spi/spi-omap-uwire.c
149
printk(KERN_ERR "%s: timeout. reg=%#06x "
drivers/spi/spi-sh.c
191
printk(KERN_ERR "%s: timeout\n", __func__);
drivers/spi/spi-sh.c
207
printk(KERN_ERR "%s: timeout\n", __func__);
drivers/spi/spi-sh.c
244
printk(KERN_ERR "%s: timeout\n", __func__);
drivers/spi/spi-sh.c
449
printk(KERN_ERR "spi_register_controller error.\n");
drivers/target/sbp/sbp_target.c
1912
printk(KERN_INFO "err %u len %zu pos %u\n",
drivers/target/target_core_configfs.c
1012
printk(KERN_ERR "dev[%p]: SE Device emulation of restricted"
drivers/target/target_core_tmr.c
169
printk("ABORT_TASK: Sending TMR_TASK_DOES_NOT_EXIST for ref_tag: %lld\n",
drivers/target/target_core_tmr.c
225
printk("LUN_RESET TMR: non-zero kref_get_unless_zero\n");
drivers/target/target_core_user.c
2745
printk(KERN_ERR "Invalid qfull timeout value %d\n", val);
drivers/target/target_core_user.c
380
printk(KERN_ERR "TCMU_ATTR_CMD_STATUS or TCMU_ATTR_DEVICE_ID not set, doing nothing\n");
drivers/target/target_core_user.c
442
printk(KERN_INFO "tcmu daemon: command reply support %u.\n",
drivers/tty/amiserial.c
1300
printk("In rs_wait_until_sent(%d) check=%lu...", timeout, char_time);
drivers/tty/amiserial.c
1301
printk("jiff=%lu...", jiffies);
drivers/tty/amiserial.c
1305
printk("serdatr = %d (jiff=%lu)...", lsr, jiffies);
drivers/tty/amiserial.c
1316
printk("lsr = %d (jiff=%lu)...done\n", lsr, jiffies);
drivers/tty/amiserial.c
1518
printk(KERN_INFO "ttyS0 is the amiga builtin serial port\n");
drivers/tty/amiserial.c
202
printk("DR%02x:%02x...", ch, status);
drivers/tty/amiserial.c
239
printk("handling break....");
drivers/tty/amiserial.c
294
printk("THRE...");
drivers/tty/amiserial.c
329
printk("ttyS%d CD now %s...", info->line,
drivers/tty/amiserial.c
336
printk("doing serial hangup...");
drivers/tty/amiserial.c
346
printk("CTS tx start...");
drivers/tty/amiserial.c
361
printk("CTS tx stop...");
drivers/tty/amiserial.c
393
printk("ser_rx_int...");
drivers/tty/amiserial.c
401
printk("end.\n");
drivers/tty/amiserial.c
412
printk("ser_tx_int...");
drivers/tty/amiserial.c
420
printk("end.\n");
drivers/tty/amiserial.c
465
printk("starting up ttys%d ...", info->line);
drivers/tty/amiserial.c
524
printk("Shutting down serial port %d ....\n", info->line);
drivers/tty/amiserial.c
851
printk("throttle %s ....\n", tty_name(tty));
drivers/tty/amiserial.c
870
printk("unthrottle %s ....\n", tty_name(tty));
drivers/tty/hvc/hvc_console.c
1040
printk(KERN_ERR "Couldn't create kthread for console.\n");
drivers/tty/hvc/hvc_console.c
1047
printk(KERN_ERR "Couldn't register hvc console driver\n");
drivers/tty/hvc/hvc_console.c
374
printk(KERN_ERR "hvc_open: request_irq failed with rc %d.\n", rc);
drivers/tty/hvc/hvc_console.c
426
printk(KERN_ERR "hvc_close %X: oops, count is %d\n",
drivers/tty/hvc/hvcs.c
1014
printk(KERN_ERR "HVCS: int enable failed for"
drivers/tty/hvc/hvcs.c
1019
printk(KERN_ERR "HVCS: irq req failed for"
drivers/tty/hvc/hvcs.c
1072
printk(KERN_WARNING "HVCS: open failed, no device associated"
drivers/tty/hvc/hvcs.c
1083
printk(KERN_WARNING "HVCS: partner connect failed.\n");
drivers/tty/hvc/hvcs.c
1111
printk(KERN_WARNING "HVCS: enable device failed.\n");
drivers/tty/hvc/hvcs.c
1147
printk(KERN_INFO "HVCS: vty-server@%X connection opened.\n",
drivers/tty/hvc/hvcs.c
1199
printk(KERN_ERR "HVCS: vty-server@%X open_count: %d is mismanaged.\n",
drivers/tty/hvc/hvcs.c
1277
printk(KERN_WARNING "HVCS write: count being truncated to"
drivers/tty/hvc/hvcs.c
1468
printk(KERN_ERR "HVCS: registration as a tty driver failed.\n");
drivers/tty/hvc/hvcs.c
1481
printk(KERN_ERR "HVCS: khvcsd creation failed.\n");
drivers/tty/hvc/hvcs.c
1505
printk(KERN_ERR "HVCS: can't register vio driver\n");
drivers/tty/hvc/hvcs.c
1541
printk(KERN_INFO "HVCS: driver module removed.\n");
drivers/tty/hvc/hvcs.c
349
printk(KERN_INFO "HVCS: Denied current_vty change: -EPERM.\n");
drivers/tty/hvc/hvcs.c
384
printk(KERN_INFO "HVCS: vterm state unchanged. "
drivers/tty/hvc/hvcs.c
391
printk(KERN_INFO "HVCS: vterm state unchanged. The"
drivers/tty/hvc/hvcs.c
397
printk(KERN_INFO "HVCS: Closed vty-server@%X and"
drivers/tty/hvc/hvcs.c
462
printk(KERN_INFO "HVCS: rescanning partner info for all"
drivers/tty/hvc/hvcs.c
679
printk(KERN_INFO "HVCS: Closed vty-server@%X and"
drivers/tty/hvc/hvcs.c
685
printk(KERN_INFO "HVCS: Destroyed hvcs_struct for vty-server@%X.\n",
drivers/tty/hvc/hvcs.c
713
printk(KERN_ERR "HVCS: hvcs_index_list NOT valid!.\n");
drivers/tty/hvc/hvcs.c
734
printk(KERN_ERR "HVCS: probed with invalid parameter.\n");
drivers/tty/hvc/hvcs.c
774
printk(KERN_ERR "HVCS: Failed to fetch partner"
drivers/tty/hvc/hvcs.c
788
printk(KERN_INFO "HVCS: vty-server@%X added to the vio bus.\n", dev->unit_address);
drivers/tty/hvc/hvcs.c
824
printk(KERN_INFO "HVCS: vty-server@%X removed from the"
drivers/tty/hvc/hvcs.c
878
printk(KERN_ERR "HVCS: Failed to fetch partner"
drivers/tty/hvc/hvcs.c
979
printk(KERN_INFO "HVCS: vty-server or partner"
drivers/tty/hvc/hvsi.c
1066
printk(KERN_ERR "HVSI: couldn't reserve irq 0x%x (error %i)\n",
drivers/tty/hvc/hvsi.c
1079
printk(KERN_DEBUG "HVSI: registered %i devices\n", hvsi_count);
drivers/tty/hvc/hvsi.c
1211
printk(KERN_ERR "%s: couldn't create irq mapping for 0x%x\n",
drivers/tty/hvc/hvsi.c
192
printk(" ");
drivers/tty/hvc/hvsi.c
194
printk("%.2x", data[i]);
drivers/tty/hvc/hvsi.c
196
printk("\n ");
drivers/tty/hvc/hvsi.c
199
printk("%c", data[i]);
drivers/tty/hvc/hvsi.c
201
printk(".");
drivers/tty/hvc/hvsi.c
203
printk("\n");
drivers/tty/hvc/hvsi.c
210
printk("type 0x%x, len %i, seqno %i:\n", header->type, header->len,
drivers/tty/hvc/hvsi.c
247
printk(KERN_WARNING "hvsi%i: unknown HVSI control packet: ",
drivers/tty/hvc/hvsi.c
273
printk(KERN_ERR "hvsi%i: unexpected query response: ", hp->index);
drivers/tty/hvc/hvsi.c
297
printk(KERN_ERR "hvsi%i: couldn't send query response!\n",
drivers/tty/hvc/hvsi.c
315
printk(KERN_ERR "hvsi%i: unexpected query: ", hp->index);
drivers/tty/hvc/hvsi.c
413
printk(KERN_ERR "hvsi%i: got malformed packet\n", hp->index);
drivers/tty/hvc/hvsi.c
440
printk(KERN_ERR "hvsi%i: unknown HVSI packet type 0x%x\n",
drivers/tty/hvc/hvsi.c
555
printk(KERN_ERR "hvsi%i: couldn't send query (%i)!\n", hp->index,
drivers/tty/hvc/hvsi.c
572
printk(KERN_ERR "hvsi%i: didn't get modem flags\n", hp->index);
drivers/tty/hvc/hvsi.c
602
printk(KERN_ERR "hvsi%i: couldn't set DTR!\n", hp->index);
drivers/tty/hvc/hvsi.c
635
printk(KERN_ERR "hvsi%i: couldn't send version query\n", hp->index);
drivers/tty/hvc/hvsi.c
654
printk(KERN_ERR "hvsi%i: re-handshaking failed\n", hp->index);
drivers/tty/hvc/hvsi.c
660
printk(KERN_ERR "hvsi%i: lost console!\n", hp->index);
drivers/tty/hvc/hvsi.c
727
printk(KERN_ERR "%s: HVSI handshaking failed\n", tty->name);
drivers/tty/hvc/hvsi.c
733
printk(KERN_ERR "%s: couldn't get initial modem flags\n", tty->name);
drivers/tty/hvc/hvsi.c
739
printk(KERN_ERR "%s: couldn't set DTR\n", tty->name);
drivers/tty/hvc/hvsi.c
808
printk(KERN_ERR "hvsi_close %lu: oops, count is %d\n",
drivers/tty/hvc/hvsi.c
844
printk(KERN_ERR "hvsi%i: service processor died\n", hp->index);
drivers/tty/ipwireless/hardware.c
1127
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1168
printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1196
printk(KERN_WARNING IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1199
printk(KERN_WARNING IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1206
printk(KERN_WARNING IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1454
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1463
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1491
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1501
printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": card is ready.\n");
drivers/tty/ipwireless/hardware.c
1506
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1537
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1553
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1561
printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1567
printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1572
printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1592
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1672
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1686
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
1694
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
631
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
649
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
673
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
774
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
82
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
865
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/hardware.c
881
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/main.c
193
printk(KERN_INFO IPWIRELESS_PCCARD_NAME ": Card type %s\n",
drivers/tty/ipwireless/main.c
195
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/main.c
199
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/network.c
150
printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": ppp blocked\n");
drivers/tty/ipwireless/network.c
262
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/network.c
279
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/network.c
476
printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": online\n");
drivers/tty/ipwireless/network.c
484
printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME ": offline\n");
drivers/tty/ipwireless/network.c
80
printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/tty.c
169
printk(KERN_DEBUG IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/tty.c
461
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/tty.c
524
printk(KERN_INFO IPWIRELESS_PCCARD_NAME
drivers/tty/ipwireless/tty.c
586
printk(KERN_ERR IPWIRELESS_PCCARD_NAME
drivers/tty/moxa.c
1169
printk(KERN_ERR "can't register MOXA Smartio tty driver!\n");
drivers/tty/moxa.c
1176
printk(KERN_ERR "Can't register MOXA pci driver!\n");
drivers/tty/moxa.c
626
printk(KERN_ERR "MOXA: bios upload failed -- CPU/Basic "
drivers/tty/moxa.c
635
printk(KERN_ERR "MOXA: bios upload failed -- board not found\n");
drivers/tty/moxa.c
645
printk(KERN_ERR "MOXA: invalid 320 bios -- too short\n");
drivers/tty/moxa.c
781
printk(KERN_ERR "MOXA: bios length is not even\n");
drivers/tty/moxa.c
902
printk(KERN_WARNING "MOXA firmware: unexpected input "
drivers/tty/moxa.c
945
printk(KERN_ERR "firmware failed to load, reason: %s\n", rsn);
drivers/tty/moxa.c
960
printk(KERN_ERR "cannot allocate memory for ports\n");
drivers/tty/moxa.c
986
printk(KERN_ERR "MOXA: request_firmware failed. Make sure "
drivers/tty/mxser.c
1854
printk(KERN_ERR "Couldn't install MOXA Smartio/Industio family "
drivers/tty/mxser.c
1861
printk(KERN_ERR "mxser: can't register pci driver\n");
drivers/tty/nozomi.c
1541
printk("noz: activated %d: %p\n", tty->index, tport);
drivers/tty/nozomi.c
1563
printk("noz: shutdown %p\n", tport);
drivers/tty/nozomi.c
1827
printk(KERN_ERR "Nozomi: failed to register ntty driver\n");
drivers/tty/nozomi.c
1833
printk(KERN_ERR "Nozomi: can't register pci driver\n");
drivers/tty/serial/21285.c
496
printk(KERN_INFO "Serial: 21285 driver\n");
drivers/tty/serial/amba-pl010.c
789
printk(KERN_INFO "Serial: AMBA driver\n");
drivers/tty/serial/apbuart.c
537
printk(KERN_INFO "grlib-apbuart at 0x%llx, irq %d\n",
drivers/tty/serial/apbuart.c
620
printk(KERN_INFO "Serial: GRLIB APBUART driver\n");
drivers/tty/serial/apbuart.c
625
printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
drivers/tty/serial/apbuart.c
632
printk(KERN_ERR
drivers/tty/serial/cpm_uart.c
1271
printk(KERN_ERR "CPM UART %pOFn has no/invalid "
drivers/tty/serial/cpm_uart.c
1280
printk(KERN_ERR "CPM UART %pOFn has no/invalid "
drivers/tty/serial/cpm_uart.c
1404
printk(KERN_ERR "cpm_uart: console index %d too high\n",
drivers/tty/serial/cpm_uart.c
266
printk(KERN_WARNING "No room in flip buffer\n");
drivers/tty/serial/dz.c
409
printk(KERN_ERR "dz: Cannot get IRQ %d!\n", dport->port.irq);
drivers/tty/serial/dz.c
688
printk(KERN_ERR "dz: Cannot map MMIO\n");
drivers/tty/serial/dz.c
704
printk(KERN_ERR
drivers/tty/serial/dz.c
932
printk("%s%s\n", dz_name, dz_version);
drivers/tty/serial/ip22zilog.c
988
printk(KERN_INFO "Console: ttyS%d (IP22-Zilog)\n", con->index);
drivers/tty/serial/jsm/jsm_tty.c
464
printk(KERN_INFO "jsm: linemap is full, added device failed\n");
drivers/tty/serial/jsm/jsm_tty.c
471
printk(KERN_INFO "jsm: Port %d failed. Aborting...\n", i);
drivers/tty/serial/jsm/jsm_tty.c
474
printk(KERN_INFO "jsm: Port %d added\n", i);
drivers/tty/serial/mcf.c
378
printk(KERN_ERR "MCF: unable to attach ColdFire UART %d "
drivers/tty/serial/mcf.c
631
printk("ColdFire internal UART serial driver\n");
drivers/tty/serial/mpc52xx_uart.c
1230
printk(KERN_ERR "mpc52xx_uart.c: "
drivers/tty/serial/mpc52xx_uart.c
1866
printk(KERN_INFO "Serial: MPC52xx PSC UART driver\n");
drivers/tty/serial/mpc52xx_uart.c
1870
printk(KERN_ERR "%s: uart_register_driver failed (%i)\n",
drivers/tty/serial/mpc52xx_uart.c
1888
printk(KERN_ERR "%s: platform_driver_register failed (%i)\n",
drivers/tty/serial/mux.c
433
printk(KERN_INFO "Serial mux driver (%d ports) Revision: 0.6\n", port_count);
drivers/tty/serial/mux.c
444
printk(KERN_ERR "Serial mux: Unable to register driver.\n");
drivers/tty/serial/pmac_zilog.c
1402
printk(KERN_INFO "pmac_zilog: i2c-modem detected, id: %d\n",
drivers/tty/serial/pmac_zilog.c
1406
printk(KERN_INFO "pmac_zilog: serial modem detected\n");
drivers/tty/serial/pmac_zilog.c
1483
printk(KERN_WARNING "%pOFn: Failed to request resource"
drivers/tty/serial/pmac_zilog.c
1519
printk("HRM... pmz_suspend with NULL uap\n");
drivers/tty/serial/pmac_zilog.c
1572
printk(KERN_ERR "pmac_zilog: missing node %c for escc %pOF\n",
drivers/tty/serial/pmac_zilog.c
1812
printk(KERN_ERR
drivers/tty/serial/sa1100.c
640
printk(KERN_ERR "%s: bad index number %d\n", __func__, idx);
drivers/tty/serial/sa1100.c
667
printk(KERN_ERR "%s: bad port number %d\n", __func__, port);
drivers/tty/serial/sa1100.c
895
printk(KERN_INFO "Serial: SA11x0 driver\n");
drivers/tty/serial/sb1250-duart.c
670
printk(err);
drivers/tty/serial/sb1250-duart.c
678
printk(err);
drivers/tty/serial/sb1250-duart.c
695
printk(err);
drivers/tty/serial/sb1250-duart.c
703
printk(err);
drivers/tty/serial/serial_txx9.c
1136
printk(KERN_WARNING "Couldn't register serial port %s: %d\n", pci_name(dev), line);
drivers/tty/serial/st-asc.c
951
printk(banner);
drivers/tty/serial/sunsab.c
888
printk("Console: ttyS%d (SAB82532)\n",
drivers/tty/serial/sunsu.c
1183
printk("%pOF: %s port at %llx, irq %u\n",
drivers/tty/serial/sunsu.c
1313
printk("Console: ttyS%d (SU)\n",
drivers/tty/serial/sunsu.c
642
printk("ttyS%d: LSR safety check engaged!\n", up->port.line);
drivers/tty/serial/sunsu.c
654
printk("su: Cannot register IRQ %d\n", up->port.irq);
drivers/tty/serial/sunzilog.c
1223
printk(KERN_INFO "Console: ttyS%d (SunZilog zs%d)\n",
drivers/tty/serial/sunzilog.c
1487
printk(KERN_INFO "%s: Keyboard at MMIO 0x%llx (irq = %d) "
drivers/tty/serial/sunzilog.c
1492
printk(KERN_INFO "%s: Mouse at MMIO 0x%llx (irq = %d) "
drivers/tty/serial/timbuart.c
467
printk(KERN_ERR "timberdale: Failed to register Timberdale UART: %d\n",
drivers/tty/serial/ucc_uart.c
1494
printk(KERN_INFO "Freescale QUICC Engine UART device driver\n");
drivers/tty/serial/ucc_uart.c
1496
printk(KERN_INFO "ucc-uart: Using loopback mode\n");
drivers/tty/serial/ucc_uart.c
1501
printk(KERN_ERR "ucc-uart: could not register UART driver\n");
drivers/tty/serial/ucc_uart.c
1507
printk(KERN_ERR
drivers/tty/serial/ucc_uart.c
1517
printk(KERN_INFO
drivers/tty/serial/ucc_uart.c
225
printk(KERN_ERR "%s: addr=%p\n", __func__, addr);
drivers/tty/serial/ucc_uart.c
244
printk(KERN_ERR "%s: addr=%llx\n", __func__, (u64)addr);
drivers/tty/serial/zs.c
201
printk("W%-2d = 0x%02x\t", j, zport->regs[j]);
drivers/tty/serial/zs.c
202
printk("\n");
drivers/tty/serial/zs.c
204
printk("R%-2d = 0x%02x\t", j, read_zsreg(zport, j));
drivers/tty/serial/zs.c
205
printk("\n\n");
drivers/tty/serial/zs.c
766
printk(KERN_ERR "zs: can't get irq %d\n",
drivers/tty/serial/zs.c
977
printk(KERN_ERR "zs: Cannot map MMIO\n");
drivers/tty/serial/zs.c
988
printk(KERN_ERR "zs: Unable to reserve MMIO resource\n");
drivers/tty/vt/selection.c
220
printk(KERN_WARNING "selection: kmalloc() failed\n");
drivers/uio/uio.c
949
printk(KERN_ERR "class_register failed for uio\n");
drivers/usb/atm/speedtch.c
627
printk(" %02x", instance->int_data[i]);
drivers/usb/atm/speedtch.c
628
printk("\n");
drivers/usb/atm/usbatm.h
40
printk(level "ATM dev %d: " format , \
drivers/usb/class/cdc-acm.c
2170
printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
drivers/usb/class/usblp.c
1315
printk(KERN_INFO "usblp%d: Disabling reads from "
drivers/usb/class/usblp.c
1360
printk(KERN_ERR "usblp: can't set desired altsetting %d on interface %d\n",
drivers/usb/class/usblp.c
317
printk(KERN_WARNING "usblp%d: "
drivers/usb/class/usblp.c
341
printk(KERN_WARNING "usblp%d: "
drivers/usb/class/usblp.c
389
printk(KERN_INFO "usblp%d: %s\n",
drivers/usb/class/usblp.c
462
printk(KERN_INFO "usblp%d: removed\n", usblp->minor);
drivers/usb/class/usblp.c
868
printk(KERN_ERR "usblp%d: error %d reading from printer\n",
drivers/usb/core/devio.c
2906
printk(KERN_ERR "Unable to register minors for usb_device\n");
drivers/usb/core/devio.c
2912
printk(KERN_ERR "Unable to get usb_device major %d\n",
drivers/usb/core/file.c
80
printk(KERN_ERR "Unable to get major %d for usb devices\n",
drivers/usb/core/hcd.c
3186
printk(KERN_ERR "USB: monitor was not registered\n");
drivers/usb/core/hub.c
6070
printk(KERN_ERR "%s: can't register hub driver\n",
drivers/usb/core/sysfs.c
431
printk(KERN_WARNING "WARNING! power/level is deprecated; "
drivers/usb/core/usb.c
321
printk(KERN_DEBUG "Did not find alt setting %u for intf %u, "
drivers/usb/core/usb.c
963
printk(KERN_ERR
drivers/usb/early/ehci-dbgp.c
76
#define dbgp_printk printk
drivers/usb/gadget/function/uvc.h
53
printk(KERN_DEBUG "uvcvideo: " msg); \
drivers/usb/gadget/legacy/dbgp.c
77
printk(KERN_NOTICE "%s%c", buf, c);
drivers/usb/gadget/legacy/inode.c
247
printk(level "%s: " fmt , shortname , ## args)
drivers/usb/gadget/udc/fsl_udc_core.c
1473
printk(KERN_INFO "udc: switch to test mode %d.\n", ptc);
drivers/usb/gadget/udc/fsl_udc_core.c
1953
printk(KERN_INFO "Suspend udc for OTG auto detect\n");
drivers/usb/gadget/udc/goku_udc.c
1753
printk(KERN_ERR "Check PCI %s IRQ setup!\n", pci_name(pdev));
drivers/usb/gadget/udc/goku_udc.h
265
printk(level "%s %s: " fmt , driver_name , \
drivers/usb/gadget/udc/r8a66597-udc.h
250
printk(KERN_ERR "r8a66597: platdata clock is wrong.\n");
drivers/usb/host/bcma-hcd.c
122
printk(KERN_EMERG "Failed to enable misc PPL!\n");
drivers/usb/host/bcma-hcd.c
149
printk(KERN_EMERG
drivers/usb/host/isp116x.h
336
#define ERR(stuff...) printk(KERN_ERR "116x: " stuff)
drivers/usb/host/isp116x.h
337
#define WARNING(stuff...) printk(KERN_WARNING "116x: " stuff)
drivers/usb/host/isp116x.h
338
#define INFO(stuff...) printk(KERN_INFO "116x: " stuff)
drivers/usb/host/isp116x.h
555
printk(KERN_WARNING "td: %x %d%c%d %d,%d,%d %x %x%x%x\n",
drivers/usb/host/isp116x.h
568
printk(KERN_WARNING "-> ");
drivers/usb/host/isp116x.h
570
printk("%02x ", ((u8 *) buf)[k]);
drivers/usb/host/isp116x.h
571
printk("\n");
drivers/usb/host/isp116x.h
580
printk(KERN_WARNING "<- ");
drivers/usb/host/isp116x.h
582
printk("%02x ", ((u8 *) buf)[k]);
drivers/usb/host/isp116x.h
583
printk("\n");
drivers/usb/host/isp116x.h
586
printk(KERN_WARNING "-\n");
drivers/usb/host/ohci-nxp.c
92
printk(KERN_INFO "ISP1301 Vendor ID : 0x%04x\n",
drivers/usb/host/ohci-nxp.c
94
printk(KERN_INFO "ISP1301 Product ID : 0x%04x\n",
drivers/usb/host/ohci-nxp.c
96
printk(KERN_INFO "ISP1301 Version ID : 0x%04x\n",
drivers/usb/host/ohci-pxa27x.c
157
printk( KERN_ERR
drivers/usb/host/ohci-sa1111.c
48
printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label,
drivers/usb/host/pci-quirks.c
265
printk(KERN_DEBUG "QUIRK: Enable AMD PLL fix\n");
drivers/usb/host/r8a66597-hcd.c
113
printk(KERN_ERR "r8a66597: reg access fail.\n");
drivers/usb/host/r8a66597-hcd.c
1219
printk(KERN_ERR "r8a66597: invalid type.\n");
drivers/usb/host/r8a66597-hcd.c
1324
printk(KERN_ERR "r8a66597: in fifo not ready (%d)\n", pipenum);
drivers/usb/host/r8a66597-hcd.c
1399
printk(KERN_ERR "r8a66597: out fifo not ready (%d)\n", pipenum);
drivers/usb/host/r8a66597-hcd.c
2047
printk(KERN_ERR "r8a66597: get_r8a66597_device fail.(%d)\n", addr);
drivers/usb/host/r8a66597-hcd.c
253
printk(KERN_ERR "r8a66597: Illegal root port number.\n");
drivers/usb/host/r8a66597-hcd.c
274
printk(KERN_ERR "r8a66597: unknown speed\n");
drivers/usb/host/r8a66597-hcd.c
443
printk(KERN_ERR "r8a66597: register%lx, loop %x "
drivers/usb/host/r8a66597-hcd.c
682
printk(KERN_ERR "r8a66597: Illegal type\n");
drivers/usb/host/r8a66597-hcd.c
712
printk(KERN_ERR "r8a66597: Illegal type\n");
drivers/usb/host/r8a66597-hcd.c
731
printk(KERN_ERR "r8a66597: Illegal pipenum (%d)\n", pipenum);
drivers/usb/host/r8a66597-hcd.c
747
printk(KERN_ERR "r8a66597: Illegal pipenum (%d)\n", pipenum);
drivers/usb/host/r8a66597-hcd.c
89
printk(KERN_ERR "r8a66597: reg access fail.\n");
drivers/usb/host/r8a66597-hcd.c
99
printk(KERN_ERR "r8a66597: reg access fail.\n");
drivers/usb/host/r8a66597.h
313
printk(KERN_ERR "r8a66597: platdata clock is wrong.\n");
drivers/usb/host/sl811_cs.c
170
printk(KERN_WARNING "sl811_cs_config failed\n");
drivers/usb/host/sl811_cs.c
38
#define INFO(args...) printk(KERN_INFO "sl811_cs: " args)
drivers/usb/host/uhci-debug.c
36
printk(KERN_DEBUG "%s\n", buf);
drivers/usb/host/uhci-grlib.c
121
printk(KERN_ERR "%s: irq_of_parse_and_map failed\n", __FILE__);
drivers/usb/image/mdc800.c
1028
printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_VERSION ":"
drivers/usb/image/mdc800.c
1039
printk(KERN_ERR "mdc800: can't alloc memory!\n");
drivers/usb/image/mdc800.c
350
printk(KERN_WARNING "mdc800: Camera gets disconnected "
drivers/usb/image/mdc800.c
694
printk(KERN_WARNING "mdc800: Illegal State \"working\""
drivers/usb/image/microtek.c
175
printk( KERN_DEBUG MTS_NAME x )
drivers/usb/isp1760/isp1760-if.c
102
printk(KERN_ERR "request region #1\n");
drivers/usb/isp1760/isp1760-if.c
108
printk(KERN_ERR "ioremap #1\n");
drivers/usb/isp1760/isp1760-if.c
165
printk(KERN_ERR "ips1761_pci_shutdown\n");
drivers/usb/isp1760/isp1760-if.c
45
printk(KERN_ERR "memory length for this resource is wrong\n");
drivers/usb/isp1760/isp1760-if.c
50
printk(KERN_ERR "host controller already in use\n");
drivers/usb/isp1760/isp1760-if.c
57
printk(KERN_ERR "Error ioremap failed\n");
drivers/usb/misc/appledisplay.c
304
printk(KERN_INFO "appledisplay: Apple Cinema Display connected\n");
drivers/usb/misc/appledisplay.c
341
printk(KERN_INFO "appledisplay: Apple Cinema Display disconnected\n");
drivers/usb/misc/isight_firmware.c
105
printk(KERN_ERR "isight firmware loading completion failed\n");
drivers/usb/misc/isight_firmware.c
48
printk(KERN_ERR "Unable to load isight firmware\n");
drivers/usb/misc/isight_firmware.c
59
printk(KERN_ERR
drivers/usb/misc/isight_firmware.c
80
printk(KERN_ERR
drivers/usb/misc/isight_firmware.c
92
printk(KERN_ERR
drivers/usb/misc/ldusb.c
315
printk(KERN_ERR "%s - error, can't find device for minor %d\n",
drivers/usb/misc/ldusb.c
456
printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
drivers/usb/misc/ldusb.c
541
printk(KERN_ERR "ldusb: No device or device unplugged %d\n", retval);
drivers/usb/misc/uss720.c
219
printk(KERN_WARNING "get_1284_register: "
drivers/usb/misc/uss720.c
224
printk(KERN_WARNING "get_1284_register timeout\n");
drivers/usb/misc/uss720.c
514
printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %zu rlen %u\n", buf, length, rlen);
drivers/usb/misc/uss720.c
575
printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %zu rlen %u\n", buffer, len, rlen);
drivers/usb/misc/uss720.c
593
printk(KERN_ERR "uss720: recvbulk ep 2 buf %p len %zu rlen %u\n", buffer, len, rlen);
drivers/usb/misc/uss720.c
626
printk(KERN_ERR "uss720: sendbulk ep 1 buf %p len %zu rlen %u\n", buffer, len, rlen);
drivers/usb/misc/uss720.c
713
printk(KERN_WARNING "uss720: could not register parport\n");
drivers/usb/misc/uss720.c
819
printk(KERN_INFO KBUILD_MODNAME ": " DRIVER_DESC "\n");
drivers/usb/misc/uss720.c
820
printk(KERN_INFO KBUILD_MODNAME ": NOTE: this is a special purpose "
drivers/usb/misc/uss720.c
822
printk(KERN_INFO KBUILD_MODNAME ": protocols (eg. bitbang) over "
drivers/usb/misc/uss720.c
824
printk(KERN_INFO KBUILD_MODNAME ": If you just want to connect to a "
drivers/usb/misc/yurex.c
362
printk(KERN_ERR "%s - error, can't find device for minor %d",
drivers/usb/mon/mon_bin.c
692
printk(KERN_ERR TAG ": consistency error on open\n");
drivers/usb/mon/mon_bin.c
791
printk(KERN_ERR TAG ": consistency error on close\n");
drivers/usb/mon/mon_main.c
350
printk(KERN_NOTICE TAG ": unable to register with the core\n");
drivers/usb/mon/mon_main.c
397
printk(KERN_ERR TAG
drivers/usb/mon/mon_text.c
654
printk(KERN_ERR TAG ": consistency error on close\n");
drivers/usb/musb/musb_debug.h
14
do { printk(facility "%s %d: " format , \
drivers/usb/musb/musb_gadget_ep0.c
789
printk(KERN_NOTICE "%s: peripheral reset "
drivers/usb/musb/tusb6010.c
1054
printk(KERN_ERR "tusb: Unable to detect TUSB6010\n");
drivers/usb/musb/tusb6010.c
1061
printk(KERN_ERR "tusb: Unsupported TUSB6010 revision %i\n",
drivers/usb/musb/tusb6010.c
1152
printk(KERN_ERR "Could not start tusb6010 (%d)\n",
drivers/usb/musb/tusb6010.c
966
printk(KERN_WARNING "%s %s: dma not reactivated\n",
drivers/usb/musb/tusb6010.c
990
printk(KERN_WARNING "%s %s: dma still active\n",
drivers/usb/musb/tusb6010_omap.c
86
printk(KERN_ERR "ep%i trying to release dmareq0 for ep%i\n",
drivers/usb/storage/alauda.c
636
printk(KERN_WARNING
drivers/usb/storage/alauda.c
657
printk(KERN_WARNING
drivers/usb/storage/alauda.c
664
printk(KERN_WARNING
drivers/usb/storage/alauda.c
834
printk(KERN_WARNING
drivers/usb/storage/alauda.c
841
printk(KERN_WARNING
drivers/usb/storage/ene_ub6250.c
1957
printk(KERN_INFO "MS_CardInit start\n");
drivers/usb/storage/ene_ub6250.c
2064
printk(KERN_INFO "MS_CardInit end\n");
drivers/usb/storage/ene_ub6250.c
2077
printk(KERN_INFO "transport --- ENE_MSInit\n");
drivers/usb/storage/ene_ub6250.c
2083
printk(KERN_ERR "Load MS Init Code Fail !!\n");
drivers/usb/storage/ene_ub6250.c
2096
printk(KERN_ERR "Execution MS Init Code Fail !!\n");
drivers/usb/storage/ene_ub6250.c
2104
printk(KERN_INFO "Insert = %x\n", !!(s & MS_Insert));
drivers/usb/storage/ene_ub6250.c
2105
printk(KERN_INFO "Ready = %x\n", !!(s & MS_Ready));
drivers/usb/storage/ene_ub6250.c
2106
printk(KERN_INFO "IsMSPro = %x\n", !!(s & MS_IsMSPro));
drivers/usb/storage/ene_ub6250.c
2107
printk(KERN_INFO "IsMSPHG = %x\n", !!(s & MS_IsMSPHG));
drivers/usb/storage/ene_ub6250.c
2108
printk(KERN_INFO "WtP= %x\n", !!(s & MS_WtP));
drivers/usb/storage/freecom.c
482
printk (KERN_CRIT "freecom reset called\n");
drivers/usb/storage/sddr09.c
1149
printk(KERN_WARNING "sddr09: could not read card info\n");
drivers/usb/storage/sddr09.c
1191
printk(KERN_WARNING "%s\n", blurbtxt);
drivers/usb/storage/sddr09.c
1239
printk(KERN_WARNING "sddr09_read_map: out of memory\n");
drivers/usb/storage/sddr09.c
1279
printk(KERN_WARNING "sddr09: PBA %d has no logical mapping\n",
drivers/usb/storage/sddr09.c
1293
printk(KERN_WARNING
drivers/usb/storage/sddr09.c
1304
printk(KERN_WARNING
drivers/usb/storage/sddr09.c
1314
printk(KERN_WARNING
drivers/usb/storage/sddr09.c
1334
printk(KERN_WARNING
drivers/usb/storage/sddr09.c
1343
printk(KERN_WARNING
drivers/usb/storage/sddr09.c
1477
printk(" %02X", data[j]);
drivers/usb/storage/sddr09.c
1478
printk("\n");
drivers/usb/storage/sddr09.c
871
printk(KERN_WARNING
drivers/usb/storage/sddr09.c
884
printk(KERN_WARNING "sddr09: avoid writing to pba 1\n");
drivers/usb/storage/sddr55.c
496
printk(KERN_ERR "sddr55 error: new PBA %04X already in use for LBA %04X\n",
drivers/usb/storage/sddr55.c
750
printk(KERN_WARNING
drivers/vhost/vringh.c
31
printk(KERN_NOTICE "vringh:");
drivers/video/console/newport_con.c
237
printk("NG1: Screensize %dx%d\n", newport_xsize, newport_ysize);
drivers/video/console/newport_con.c
280
printk
drivers/video/fbdev/acornfb.c
1007
printk(KERN_ERR "acornfb: unable to allocate screen memory\n");
drivers/video/fbdev/acornfb.c
1056
printk("Acornfb: no valid mode found\n");
drivers/video/fbdev/acornfb.c
1066
printk(KERN_INFO "Acornfb: %dkB %cRAM, %s, using %dx%d, %d.%03dkHz, %dHz\n",
drivers/video/fbdev/acornfb.c
1072
printk(KERN_INFO "Acornfb: Monitor: %d.%03d-%d.%03dkHz, %d-%dHz%s\n",
drivers/video/fbdev/acornfb.c
1079
printk(KERN_ERR "Acornfb: unable to set display parameters\n");
drivers/video/fbdev/acornfb.c
223
printk(KERN_DEBUG "VIDC registers for %dx%dx%d:\n", var->xres,
drivers/video/fbdev/acornfb.c
225
printk(KERN_DEBUG " H-cycle : %d\n", vidc.h_cycle);
drivers/video/fbdev/acornfb.c
226
printk(KERN_DEBUG " H-sync-width : %d\n", vidc.h_sync_width);
drivers/video/fbdev/acornfb.c
227
printk(KERN_DEBUG " H-border-start : %d\n", vidc.h_border_start);
drivers/video/fbdev/acornfb.c
228
printk(KERN_DEBUG " H-display-start : %d\n", vidc.h_display_start);
drivers/video/fbdev/acornfb.c
229
printk(KERN_DEBUG " H-display-end : %d\n", vidc.h_display_end);
drivers/video/fbdev/acornfb.c
230
printk(KERN_DEBUG " H-border-end : %d\n", vidc.h_border_end);
drivers/video/fbdev/acornfb.c
231
printk(KERN_DEBUG " H-interlace : %d\n", vidc.h_interlace);
drivers/video/fbdev/acornfb.c
232
printk(KERN_DEBUG " V-cycle : %d\n", vidc.v_cycle);
drivers/video/fbdev/acornfb.c
233
printk(KERN_DEBUG " V-sync-width : %d\n", vidc.v_sync_width);
drivers/video/fbdev/acornfb.c
234
printk(KERN_DEBUG " V-border-start : %d\n", vidc.v_border_start);
drivers/video/fbdev/acornfb.c
235
printk(KERN_DEBUG " V-display-start : %d\n", vidc.v_display_start);
drivers/video/fbdev/acornfb.c
236
printk(KERN_DEBUG " V-display-end : %d\n", vidc.v_display_end);
drivers/video/fbdev/acornfb.c
237
printk(KERN_DEBUG " V-border-end : %d\n", vidc.v_border_end);
drivers/video/fbdev/acornfb.c
238
printk(KERN_DEBUG " Ext Ctrl (C) : 0x%08X\n", ext_ctl);
drivers/video/fbdev/acornfb.c
239
printk(KERN_DEBUG " PLL Ctrl (D) : 0x%08X\n", vidc.pll_ctl);
drivers/video/fbdev/acornfb.c
240
printk(KERN_DEBUG " Ctrl (E) : 0x%08X\n", vidc.control);
drivers/video/fbdev/acornfb.c
241
printk(KERN_DEBUG " Data Ctrl (F) : 0x%08X\n", dat_ctl);
drivers/video/fbdev/acornfb.c
242
printk(KERN_DEBUG " Fsize : 0x%08X\n", fsize);
drivers/video/fbdev/acornfb.c
802
printk(KERN_ERR "Acornfb: bad monitor settings: %s\n", opt);
drivers/video/fbdev/acornfb.c
833
printk(KERN_ERR "acornfb: unknown monitor type: %s\n",
drivers/video/fbdev/acornfb.c
841
printk(KERN_ERR
drivers/video/fbdev/acornfb.c
907
printk(KERN_ERR "acornfb: unknown parameter: %s\n",
drivers/video/fbdev/amifb.c
3615
printk("Unknown graphics chipset, defaulting to OCS\n");
drivers/video/fbdev/amifb.c
98
# define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
drivers/video/fbdev/arcfb.c
481
printk(KERN_WARNING "no IO addresses supplied\n");
drivers/video/fbdev/arcfb.c
494
printk(KERN_INFO
drivers/video/fbdev/asiliantfb.c
239
printk(KERN_ERR "asiliantfb dotclock must be between 3.125 and 220MHz\n");
drivers/video/fbdev/asiliantfb.c
520
printk(KERN_ERR "C&T 69000 fb failed to alloc cmap memory\n");
drivers/video/fbdev/asiliantfb.c
526
printk(KERN_ERR "C&T 69000 framebuffer failed to register\n");
drivers/video/fbdev/aty/aty128fb.c
1035
printk(KERN_ERR "aty128fb: Invalid depth or RGBA\n");
drivers/video/fbdev/aty/aty128fb.c
1044
printk(KERN_ERR "aty128fb: Not enough memory for mode\n");
drivers/video/fbdev/aty/aty128fb.c
1056
printk(KERN_ERR "aty128fb: invalid width ranges\n");
drivers/video/fbdev/aty/aty128fb.c
1166
printk(KERN_ERR "aty128fb: Invalid pixel width\n");
drivers/video/fbdev/aty/aty128fb.c
1418
printk(KERN_ERR "aty128fb: Mode out of range!\n");
drivers/video/fbdev/aty/aty128fb.c
1804
printk(KERN_WARNING "aty128: Backlight registration failed\n");
drivers/video/fbdev/aty/aty128fb.c
1817
printk("aty128: Backlight initialized (%s)\n", name);
drivers/video/fbdev/aty/aty128fb.c
1828
printk("aty128: Backlight unloaded\n");
drivers/video/fbdev/aty/aty128fb.c
1870
printk(KERN_INFO "aty128fb: %s [chip rev 0x%x] ", video_card, chip_rev);
drivers/video/fbdev/aty/aty128fb.c
1873
printk("%dM %s\n", par->vram_size / (1024*1024), par->mem->name);
drivers/video/fbdev/aty/aty128fb.c
1875
printk("%dk %s\n", par->vram_size / 1024, par->mem->name);
drivers/video/fbdev/aty/aty128fb.c
1955
printk(KERN_ERR "aty128fb: Cannot set default mode.\n");
drivers/video/fbdev/aty/aty128fb.c
2013
printk(KERN_ERR "aty128fb: Cannot enable PCI device: %d\n",
drivers/video/fbdev/aty/aty128fb.c
2021
printk(KERN_ERR "aty128fb: cannot reserve frame "
drivers/video/fbdev/aty/aty128fb.c
2029
printk(KERN_ERR "aty128fb: cannot reserve MMIO region\n");
drivers/video/fbdev/aty/aty128fb.c
2065
printk(KERN_ERR "aty128fb: Can't write to video register!\n");
drivers/video/fbdev/aty/aty128fb.c
2076
printk(KERN_INFO "aty128fb: BIOS not located, guessing timings.\n");
drivers/video/fbdev/aty/aty128fb.c
2078
printk(KERN_INFO "aty128fb: Rage128 BIOS located\n");
drivers/video/fbdev/aty/aty128fb.c
2336
printk(KERN_DEBUG "aty128fb: suspending...\n");
drivers/video/fbdev/aty/aty128fb.c
2433
printk(KERN_DEBUG "aty128fb: resumed !\n");
drivers/video/fbdev/aty/aty128fb.c
547
printk(KERN_DEBUG "aty128fb: PLL write timeout!\n");
drivers/video/fbdev/aty/aty128fb.c
780
printk(KERN_ERR "aty128fb: ROM failed to map\n");
drivers/video/fbdev/aty/aty128fb.c
786
printk(KERN_DEBUG "aty128fb: Invalid ROM signature %x should "
drivers/video/fbdev/aty/aty128fb.c
820
printk(KERN_WARNING "aty128fb: PCI DATA signature in ROM incorrect: %08x\n",
drivers/video/fbdev/aty/aty128fb.c
827
printk(KERN_INFO "aty128fb: Found Intel x86 BIOS ROM Image\n");
drivers/video/fbdev/aty/aty128fb.c
830
printk(KERN_INFO "aty128fb: Found Open Firmware ROM Image\n");
drivers/video/fbdev/aty/aty128fb.c
833
printk(KERN_INFO "aty128fb: Found HP PA-RISC ROM Image\n");
drivers/video/fbdev/aty/aty128fb.c
836
printk(KERN_INFO "aty128fb: Found unknown type %d ROM Image\n",
drivers/video/fbdev/aty/aty128fb.c
90
printk(KERN_DEBUG "aty128fb: %s " fmt, __func__, ##args);
drivers/video/fbdev/aty/atyfb_base.c
116
printk(KERN_CRIT "atyfb: " msg "\n"); \
drivers/video/fbdev/aty/atyfb_base.c
122
printk(KERN_CRIT "atyfb: " msg " %x(%x)\n", x, _max_); \
drivers/video/fbdev/aty/atyfb_base.c
127
#define DPRINTK(fmt, args...) printk(KERN_DEBUG "atyfb: " fmt, ## args)
drivers/video/fbdev/aty/atyfb_base.c
132
#define PRINTKI(fmt, args...) printk(KERN_INFO "atyfb: " fmt, ## args)
drivers/video/fbdev/aty/atyfb_base.c
133
#define PRINTKE(fmt, args...) printk(KERN_ERR "atyfb: " fmt, ## args)
drivers/video/fbdev/aty/atyfb_base.c
1481
printk("debug atyfb: Mach64 non-shadow register values:");
drivers/video/fbdev/aty/atyfb_base.c
1485
printk("debug atyfb: 0x%04X: ", base + i);
drivers/video/fbdev/aty/atyfb_base.c
1494
printk("debug atyfb: Mach64 PLL register values:");
drivers/video/fbdev/aty/atyfb_base.c
1498
printk("debug atyfb: 0x%02X: ", base + i);
drivers/video/fbdev/aty/atyfb_base.c
1511
printk("debug atyfb: LCD register values:");
drivers/video/fbdev/aty/atyfb_base.c
1651
printk("atyfb: someone disabled IRQ [%08x]\n",
drivers/video/fbdev/aty/atyfb_base.c
2265
printk(KERN_WARNING "aty: Backlight registration failed\n");
drivers/video/fbdev/aty/atyfb_base.c
2278
printk("aty: Backlight initialized (%s)\n", name);
drivers/video/fbdev/aty/atyfb_base.c
2290
printk("aty: Backlight unloaded\n");
drivers/video/fbdev/aty/atyfb_base.c
2595
printk("debug atyfb: BUS_CNTL DAC_CNTL MEM_CNTL "
drivers/video/fbdev/aty/mach64_ct.c
201
printk("atyfb(%s): dsp_config 0x%08x, dsp_on_off 0x%08x\n",
drivers/video/fbdev/aty/mach64_ct.c
216
printk(KERN_CRIT "atyfb: vclk out of range\n");
drivers/video/fbdev/aty/mach64_ct.c
229
printk("atyfb(%s): pllvclk=%d MHz, vclk=%d MHz\n",
drivers/video/fbdev/aty/mach64_ct.c
274
printk("atyfb(%s): calculated 0x%08X(%i)\n", __func__, ret, ret);
drivers/video/fbdev/aty/mach64_ct.c
290
printk("atyfb(%s): about to program:\n"
drivers/video/fbdev/aty/mach64_ct.c
295
printk("atyfb(%s): setting clock %lu for FeedBackDivider %i, ReferenceDivider %i, PostDivider %i(%i)\n",
drivers/video/fbdev/aty/mach64_ct.c
423
printk(KERN_CRIT "atyfb: Unsupported xclk source: %d.\n", pll->ct.xclk_post_div);
drivers/video/fbdev/aty/mach64_ct.c
433
printk("atyfb(%s): mclk_fb_mult=%d, xclk_post_div=%d\n",
drivers/video/fbdev/aty/mach64_ct.c
532
printk(KERN_CRIT "atxfb: xclk out of range\n");
drivers/video/fbdev/aty/mach64_ct.c
553
printk("atyfb(%s): pllmclk=%d MHz, xclk=%d MHz\n",
drivers/video/fbdev/aty/mach64_ct.c
581
printk(KERN_CRIT "atyfb: mclk out of range\n");
drivers/video/fbdev/aty/mach64_ct.c
594
printk("atyfb(%s): use sclk, pllsclk=%d MHz, sclk=mclk=%d MHz\n",
drivers/video/fbdev/aty/radeon_backlight.c
141
printk("radeonfb: Memory allocation failed\n");
drivers/video/fbdev/aty/radeon_backlight.c
154
printk("radeonfb: Backlight registration failed\n");
drivers/video/fbdev/aty/radeon_backlight.c
185
printk("radeonfb: Backlight initialized (%s)\n", name);
drivers/video/fbdev/aty/radeon_backlight.c
206
printk("radeonfb: Backlight unloaded\n");
drivers/video/fbdev/aty/radeon_base.c
2256
printk(KERN_ERR "radeonfb (%s): Cannot enable PCI device\n",
drivers/video/fbdev/aty/radeon_base.c
2299
printk( KERN_ERR "radeonfb (%s): cannot request region 0.\n",
drivers/video/fbdev/aty/radeon_base.c
2306
printk( KERN_ERR "radeonfb (%s): cannot request region 2.\n",
drivers/video/fbdev/aty/radeon_base.c
2314
printk(KERN_ERR "radeonfb (%s): cannot map MMIO\n",
drivers/video/fbdev/aty/radeon_base.c
2346
printk(KERN_WARNING "radeonfb (%s): Cannot match card to OF node !\n",
drivers/video/fbdev/aty/radeon_base.c
2370
printk (KERN_ERR "radeonfb (%s): cannot map FB\n",
drivers/video/fbdev/aty/radeon_base.c
2458
printk (KERN_ERR "radeonfb (%s): could not register framebuffer\n",
drivers/video/fbdev/aty/radeon_base.c
2470
printk ("radeonfb (%s): %s\n", pci_name(rinfo->pdev), rinfo->name);
drivers/video/fbdev/aty/radeon_base.c
364
printk(KERN_ERR "radeonfb: FIFO Timeout !\n");
drivers/video/fbdev/aty/radeon_base.c
386
printk(KERN_ERR "radeonfb: Flush Timeout !\n");
drivers/video/fbdev/aty/radeon_base.c
403
printk(KERN_ERR "radeonfb: Idle Timeout !\n");
drivers/video/fbdev/aty/radeon_base.c
437
printk(KERN_ERR "radeonfb (%s): ROM failed to map\n",
drivers/video/fbdev/aty/radeon_base.c
446
printk(KERN_DEBUG "radeonfb (%s): Invalid ROM signature %x "
drivers/video/fbdev/aty/radeon_base.c
479
printk(KERN_WARNING "radeonfb (%s): PCI DATA signature in ROM"
drivers/video/fbdev/aty/radeon_base.c
486
printk(KERN_INFO "radeonfb: Found Intel x86 BIOS ROM Image\n");
drivers/video/fbdev/aty/radeon_base.c
489
printk(KERN_INFO "radeonfb: Found Open Firmware ROM Image\n");
drivers/video/fbdev/aty/radeon_base.c
492
printk(KERN_INFO "radeonfb: Found HP PA-RISC ROM Image\n");
drivers/video/fbdev/aty/radeon_base.c
495
printk(KERN_INFO "radeonfb: Found unknown type %d ROM Image\n", rom_type);
drivers/video/fbdev/aty/radeon_base.c
554
printk(KERN_WARNING "radeonfb: No ATY,RefCLK property !\n");
drivers/video/fbdev/aty/radeon_base.c
684
printk(KERN_WARNING "xtal calculation failed: %ld\n", xtal);
drivers/video/fbdev/aty/radeon_base.c
776
printk(KERN_INFO "radeonfb: Retrieved PLL infos from Open Firmware\n");
drivers/video/fbdev/aty/radeon_base.c
795
printk(KERN_INFO "radeonfb: Retrieved PLL infos from BIOS\n");
drivers/video/fbdev/aty/radeon_base.c
804
printk(KERN_INFO "radeonfb: Retrieved PLL infos from registers\n");
drivers/video/fbdev/aty/radeon_base.c
811
printk(KERN_INFO "radeonfb: Used default PLL infos\n");
drivers/video/fbdev/aty/radeon_base.c
824
printk("radeonfb: Reference=%d.%02d MHz (RefDiv=%d) Memory=%d.%02d Mhz, System=%d.%02d MHz\n",
drivers/video/fbdev/aty/radeon_base.c
829
printk("radeonfb: PLL min %d max %d\n", rinfo->pll.ppll_min, rinfo->pll.ppll_max);
drivers/video/fbdev/aty/radeon_base.c
903
printk ("radeonfb: mode %dx%dx%d rejected, color depth invalid\n",
drivers/video/fbdev/aty/radeon_monitor.c
177
printk(KERN_ERR "radeonfb: Failed to detect DFP panel info using BIOS\n");
drivers/video/fbdev/aty/radeon_monitor.c
185
printk("radeonfb: panel ID string: %s\n", stmp);
drivers/video/fbdev/aty/radeon_monitor.c
188
printk("radeonfb: detected LVDS panel size from BIOS: %dx%d\n",
drivers/video/fbdev/aty/radeon_monitor.c
205
printk(KERN_INFO "radeondb: BIOS provided dividers will be used\n");
drivers/video/fbdev/aty/radeon_monitor.c
270
printk(KERN_WARNING "radeonfb: No connector info table detected\n");
drivers/video/fbdev/aty/radeon_monitor.c
476
printk(KERN_INFO "radeonfb: No valid monitor, assuming CRT on first port\n");
drivers/video/fbdev/aty/radeon_monitor.c
538
printk(KERN_INFO "radeonfb: Reversed DACs detected\n");
drivers/video/fbdev/aty/radeon_monitor.c
542
printk(KERN_INFO "radeonfb: Reversed TMDS detected\n");
drivers/video/fbdev/aty/radeon_monitor.c
570
printk("Non-DDC laptop panel detected\n");
drivers/video/fbdev/aty/radeon_monitor.c
634
printk(KERN_INFO "radeonfb: Monitor 1 type %s found\n",
drivers/video/fbdev/aty/radeon_monitor.c
637
printk(KERN_INFO "radeonfb: EDID probed\n");
drivers/video/fbdev/aty/radeon_monitor.c
640
printk(KERN_INFO "radeonfb: Monitor 2 type %s found\n",
drivers/video/fbdev/aty/radeon_monitor.c
643
printk(KERN_INFO "radeonfb: EDID probed\n");
drivers/video/fbdev/aty/radeon_monitor.c
672
printk(KERN_DEBUG "radeonfb: Using Firmware dividers 0x%08x "
drivers/video/fbdev/aty/radeon_monitor.c
856
printk(KERN_WARNING "radeonfb: Can't find panel size, going back to CRT\n");
drivers/video/fbdev/aty/radeon_monitor.c
860
printk(KERN_WARNING "radeonfb: Assuming panel size %dx%d\n",
drivers/video/fbdev/aty/radeon_monitor.c
867
printk(KERN_WARNING "radeonfb: Can't find mode for panel size, going back to CRT\n");
drivers/video/fbdev/aty/radeon_monitor.c
894
printk("Falling back to 800x600 on JSxx hardware\n");
drivers/video/fbdev/aty/radeon_monitor.c
90
printk(KERN_WARNING "radeonfb: Unknown OF display-type: %s\n",
drivers/video/fbdev/aty/radeon_pm.c
107
printk(KERN_DEBUG "radeonfb: %s detected"
drivers/video/fbdev/aty/radeon_pm.c
1451
printk(KERN_WARNING "radeon: PAD_CTLR_STRENGTH doesn't "
drivers/video/fbdev/aty/radeon_pm.c
2549
printk(KERN_DEBUG "radeonfb (%s): switching to D2 state...\n",
drivers/video/fbdev/aty/radeon_pm.c
2595
printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n",
drivers/video/fbdev/aty/radeon_pm.c
2622
printk(KERN_DEBUG "radeonfb (%s): suspending for event: %d...\n",
drivers/video/fbdev/aty/radeon_pm.c
2740
printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
drivers/video/fbdev/aty/radeon_pm.c
2753
printk(KERN_ERR "radeonfb (%s): can't resume radeon from"
drivers/video/fbdev/aty/radeon_pm.c
2841
printk("radeonfb: Dynamic Clock Power Management enabled\n");
drivers/video/fbdev/aty/radeon_pm.c
2844
printk("radeonfb: Dynamic Clock Power Management disabled\n");
drivers/video/fbdev/aty/radeon_pm.c
2909
printk(KERN_DEBUG
drivers/video/fbdev/aty/radeon_pm.c
2915
printk(KERN_DEBUG
drivers/video/fbdev/au1200fb.c
1669
printk(DRIVER_NAME ": Panel %d %s\n", panel_index, panel->name);
drivers/video/fbdev/au1200fb.c
1670
printk(DRIVER_NAME ": Win %d %s\n", window_index, win->name);
drivers/video/fbdev/au1200fb.c
57
#define print_err(f, arg...) printk(KERN_ERR DRIVER_NAME ": " f "\n", ## arg)
drivers/video/fbdev/au1200fb.c
58
#define print_warn(f, arg...) printk(KERN_WARNING DRIVER_NAME ": " f "\n", ## arg)
drivers/video/fbdev/au1200fb.c
59
#define print_info(f, arg...) printk(KERN_INFO DRIVER_NAME ": " f "\n", ## arg)
drivers/video/fbdev/au1200fb.c
62
#define print_dbg(f, arg...) printk(KERN_DEBUG __FILE__ ": " f "\n", ## arg)
drivers/video/fbdev/au1200fb.c
698
printk("au1200fb: ERROR: fbinfo2index failed!\n");
drivers/video/fbdev/au1200fb.c
816
printk("Panel(%s), %dx%d\n", panel->name, panel->Xres, panel->Yres);
drivers/video/fbdev/au1200fb.c
888
#define D(X) printk("%25s: %08X\n", #X, X)
drivers/video/fbdev/bw2.c
259
printk(KERN_ERR "bw2: can't handle SR %02x\n",
drivers/video/fbdev/bw2.c
330
printk(KERN_INFO "%pOF: bwtwo at %lx:%lx\n",
drivers/video/fbdev/carminefb.c
499
printk(KERN_ERR "DRAM init failed\n");
drivers/video/fbdev/carminefb.c
634
printk(KERN_ERR "carminefb: Can't reserve regbase.\n");
drivers/video/fbdev/carminefb.c
641
printk(KERN_ERR "carminefb: Can't remap %s register.\n",
drivers/video/fbdev/carminefb.c
657
printk(KERN_ERR "carminefb: Memory bar is only %d bytes, %d "
drivers/video/fbdev/carminefb.c
665
printk(KERN_ERR "carminefb: Can't reserve smem.\n");
drivers/video/fbdev/carminefb.c
672
printk(KERN_ERR "carmine: Can't ioremap smem area.\n");
drivers/video/fbdev/carminefb.c
777
printk(KERN_ERR "If you disable both displays than you don't "
drivers/video/fbdev/cg14.c
548
printk(KERN_INFO "%pOF: cgfourteen at %lx:%lx, %dMB\n",
drivers/video/fbdev/cg3.c
323
printk(KERN_ERR "cgthree: can't handle SR %02x\n",
drivers/video/fbdev/cg3.c
409
printk(KERN_INFO "%pOF: cg3 at %lx:%lx\n",
drivers/video/fbdev/cg6.c
814
printk(KERN_INFO "%pOF: CGsix [%s] at %lx:%lx\n",
drivers/video/fbdev/cirrusfb.c
2096
printk(KERN_ERR "cirrusfb: Cannot enable PCI device\n");
drivers/video/fbdev/cirrusfb.c
73
printk("Assertion failed! %s,%s,%s,line=%d\n", \
drivers/video/fbdev/controlfb.c
336
printk(KERN_INFO "controlfb: VRAM Total = %dMB "
drivers/video/fbdev/controlfb.c
654
printk (KERN_ERR "controlfb_set_par: error calling"
drivers/video/fbdev/controlfb.c
843
printk(KERN_INFO "controlfb: ");
drivers/video/fbdev/controlfb.c
860
printk(KERN_CONT "Monitor sense value = 0x%x, ", sense);
drivers/video/fbdev/controlfb.c
873
printk("mac_vmode_to_var(%d, %d,) failed\n", vmode, cmode);
drivers/video/fbdev/controlfb.c
878
printk(KERN_ERR "controlfb: mac_vmode_to_var() failed\n");
drivers/video/fbdev/controlfb.c
881
printk(KERN_INFO "controlfb: ");
drivers/video/fbdev/controlfb.c
883
printk("using video mode %d and color mode %d.\n", vmode, cmode);
drivers/video/fbdev/controlfb.c
938
printk(KERN_ERR "controlfb: only one control is supported\n");
drivers/video/fbdev/controlfb.c
944
printk(KERN_ERR "can't get 2 addresses for control\n");
drivers/video/fbdev/core/fbcon.c
1197
printk(KERN_ERR "fbcon_init: detected "
drivers/video/fbdev/core/fbcon.c
2200
printk(KERN_ERR "fbcon_switch: detected "
drivers/video/fbdev/core/fbcon.c
2912
printk(KERN_INFO "fbcon: Remapping primary device, "
drivers/video/fbdev/core/fbcon.c
2927
printk(KERN_INFO "fbcon: %s (fb%i) is primary device\n",
drivers/video/fbdev/core/fbcon.c
2935
printk(KERN_INFO "fbcon: Remapping primary device, "
drivers/video/fbdev/core/fbcon.c
3352
printk(KERN_WARNING "Unable to create device "
drivers/video/fbdev/core/fbcon.c
860
printk(KERN_ERR "con2fb_release_oldinfo: "
drivers/video/fbdev/core/fbcon.c
878
printk(KERN_ERR "con2fb_init_display: detected "
drivers/video/fbdev/core/fbcvt.c
205
printk(KERN_INFO "fbcvt: Aspect ratio not CVT "
drivers/video/fbdev/core/fbcvt.c
255
printk(KERN_INFO "%s\n", buf);
drivers/video/fbdev/core/fbcvt.c
316
printk(KERN_INFO "fbcvt: Invalid input parameters\n");
drivers/video/fbdev/core/fbcvt.c
322
printk(KERN_INFO "fbcvt: Refresh rate not CVT "
drivers/video/fbdev/core/fbcvt.c
336
printk(KERN_INFO "fbcvt: 60Hz refresh rate "
drivers/video/fbdev/core/fbmem.c
323
printk(KERN_WARNING "detected "
drivers/video/fbdev/core/fbmon.c
205
printk("fbmon: The EDID Block of "
drivers/video/fbdev/core/fbmon.c
219
printk("fbmon: trying a header reconstruct\n");
drivers/video/fbdev/core/fbmon.c
223
printk("fbmon: trying to fix input type\n");
drivers/video/fbdev/core/fbmon.c
229
printk("fbmon: trying to fix monitor timings\n");
drivers/video/fbdev/core/fbmon.c
50
#define DPRINTK(fmt, args...) printk(fmt,## args)
drivers/video/fbdev/core/fbmon.c
894
printk(" Display is GTF capable\n");
drivers/video/fbdev/core/modedb.c
28
#define DPRINTK(fmt, args...) printk("modedb %s: " fmt, __func__ , ## args)
drivers/video/fbdev/cyber2000fb.c
1107
printk(KERN_ERR "disable_extregs: count = 0\n");
drivers/video/fbdev/cyber2000fb.c
1467
printk(KERN_ERR "CyberPro20x0: unknown parameter: %s\n", opt);
drivers/video/fbdev/cyber2000fb.c
1527
printk(KERN_ERR "%s: no valid mode found\n", cfb->fb.fix.id);
drivers/video/fbdev/cyber2000fb.c
1551
printk(KERN_INFO "%s: %dKiB VRAM, using %dx%d, %d.%03dkHz, %dHz\n",
drivers/video/fbdev/cyber2000fb.c
1625
printk(KERN_ERR "iga5000: cannot map I/O\n");
drivers/video/fbdev/cyber2000fb.c
1652
printk(KERN_INFO "%s: NOT enabling PCI bursts\n",
drivers/video/fbdev/cyber2000fb.c
1657
printk(KERN_INFO "%s: enabling PCI bursts\n",
drivers/video/fbdev/dnfb.c
266
printk("apollo frame buffer alive and kicking !\n");
drivers/video/fbdev/efifb.c
394
printk(KERN_DEBUG "efifb: invalid framebuffer address\n");
drivers/video/fbdev/efifb.c
397
printk(KERN_INFO "efifb: probing for efifb\n");
drivers/video/fbdev/ffb.c
1012
printk(KERN_INFO "%pOF: %s at %016lx, type %d, "
drivers/video/fbdev/gbefb.c
1141
printk(KERN_ERR "gbefb: couldn't reserve mmio region\n");
drivers/video/fbdev/gbefb.c
1149
printk(KERN_ERR "gbefb: couldn't map mmio region\n");
drivers/video/fbdev/gbefb.c
1159
printk(KERN_ERR "gbefb: couldn't allocate tiles table\n");
drivers/video/fbdev/gbefb.c
1169
printk(KERN_ERR "gbefb: couldn't map framebuffer\n");
drivers/video/fbdev/gbefb.c
1182
printk(KERN_ERR "gbefb: couldn't allocate framebuffer memory\n");
drivers/video/fbdev/gbefb.c
1214
printk(KERN_ERR "gbefb: couldn't register framebuffer\n");
drivers/video/fbdev/gbefb.c
245
printk(KERN_ERR "gbefb: turn off DMA timed out\n");
drivers/video/fbdev/gbefb.c
259
printk(KERN_ERR
drivers/video/fbdev/gbefb.c
269
printk(KERN_ERR "gbefb: wait for vpixen_off timed out\n");
drivers/video/fbdev/gbefb.c
284
printk(KERN_ERR "gbefb: turn off pixel clock timed out\n");
drivers/video/fbdev/gbefb.c
299
printk(KERN_ERR "gbefb: turn off dotclock timed out\n");
drivers/video/fbdev/gbefb.c
336
printk(KERN_ERR "gbefb: turn on dotclock timed out\n");
drivers/video/fbdev/gbefb.c
351
printk(KERN_ERR "gbefb: turn on pixel clock timed out\n");
drivers/video/fbdev/gbefb.c
366
printk(KERN_ERR "gbefb: turn on DMA timed out\n");
drivers/video/fbdev/gbefb.c
379
printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
drivers/video/fbdev/gbefb.c
868
printk(KERN_ERR "gbefb: cmap FIFO timeout\n");
drivers/video/fbdev/geode/gx1fb_core.c
303
printk(KERN_WARNING "gx1fb: invalid 'panel' option -- disabling flat panel\n");
drivers/video/fbdev/geode/gxfb_core.c
346
printk(KERN_ERR "gxfb: power up failed!\n");
drivers/video/fbdev/geode/lxfb_core.c
469
printk(KERN_ERR "lxfb: power up failed!\n");
drivers/video/fbdev/hpfb.c
255
printk(KERN_INFO "hpfb: framebuffer at 0x%lx, mapped to 0x%lx, size %dk\n",
drivers/video/fbdev/hpfb.c
257
printk(KERN_INFO "hpfb: mode is %dx%dx%d, linelength=%d\n",
drivers/video/fbdev/hpfb.c
343
printk(KERN_INFO "Topcat found at DIO select code %d "
drivers/video/fbdev/hpfb.c
412
printk(KERN_INFO "Internal Topcat found (secondary id %02x)\n", sid);
drivers/video/fbdev/i810/i810-i2c.c
37
#define DPRINTK(fmt, args...) printk(fmt,## args)
drivers/video/fbdev/i810/i810_accel.c
102
printk("accel engine lockup!!!\n");
drivers/video/fbdev/i810/i810_accel.c
103
printk("INSTDONE: 0x%04x\n", i810_readl(INSTDONE, mmio));
drivers/video/fbdev/i810/i810_accel.c
38
printk("IIR : 0x%04x\n"
drivers/video/fbdev/i810/i810_accel.c
75
printk("ringbuffer lockup!!!\n");
drivers/video/fbdev/imsttfb.c
1423
printk("imsttfb: %ux%ux%u not supported\n", info->var.xres, info->var.yres, info->var.bits_per_pixel);
drivers/video/fbdev/imsttfb.c
1484
printk(KERN_INFO "%s: OF name %pOFn\n",__func__, dp);
drivers/video/fbdev/imsttfb.c
1486
printk(KERN_ERR "imsttfb: no OF node for pci device\n");
drivers/video/fbdev/imsttfb.c
1498
printk(KERN_ERR "imsttfb: Can't reserve memory region\n");
drivers/video/fbdev/imsttfb.c
1514
printk(KERN_INFO "imsttfb: Device 0x%x unknown, "
drivers/video/fbdev/kyro/fbdev.c
407
printk(KERN_WARNING "kyrofb: depth not supported: %u\n", var->bits_per_pixel);
drivers/video/fbdev/kyro/fbdev.c
604
printk(KERN_ERR "Kyro FB: failed to create overlay surface.\n");
drivers/video/fbdev/kyro/fbdev.c
619
printk(KERN_ERR "Kyro FB: failed to create overlay viewport.\n");
drivers/video/fbdev/kyro/fbdev.c
625
printk(KERN_ERR "Kyro FB: KYRO_IOCTL_SET_VIDEO_MODE is"
drivers/video/fbdev/kyro/fbdev.c
683
printk(KERN_WARNING "kyrofb: Can't enable pdev: %d\n", err);
drivers/video/fbdev/leo.c
616
printk(KERN_INFO "%pOF: leo at %lx:%lx\n",
drivers/video/fbdev/matrox/i2c-matroxfb.c
174
printk(KERN_INFO "i2c-matroxfb: VGA->TV plug detected, DDC unavailable.\n");
drivers/video/fbdev/matrox/i2c-matroxfb.c
176
printk(KERN_INFO "i2c-matroxfb: Could not register secondary output i2c bus. Continuing anyway.\n");
drivers/video/fbdev/matrox/i2c-matroxfb.c
180
printk(KERN_INFO "i2c-matroxfb: Could not register Maven i2c bus. Continuing anyway.\n");
drivers/video/fbdev/matrox/i2c-matroxfb.c
196
printk(KERN_ERR "i2c-matroxfb: Could not register primary adapter DDC bus.\n");
drivers/video/fbdev/matrox/i2c-matroxfb.c
218
printk(KERN_ERR "i2c-matroxfb: failed to register driver\n");
drivers/video/fbdev/matrox/matroxfb_DAC1064.c
152
printk(KERN_ERR "matroxfb: aiee, SYSPLL not locked\n");
drivers/video/fbdev/matrox/matroxfb_DAC1064.c
504
printk(KERN_ERR "matroxfb: Pixel PLL not locked after 5 secs\n");
drivers/video/fbdev/matrox/matroxfb_DAC1064.c
646
printk(KERN_ERR "matroxfb: Pixel PLL%c not locked after usual time\n", (reg-M1064_XPIXPLLAM-2)/4 + 'A');
drivers/video/fbdev/matrox/matroxfb_Ti3026.c
480
printk(KERN_ERR "matroxfb: Temporary pixel PLL not locked after 5 secs\n");
drivers/video/fbdev/matrox/matroxfb_Ti3026.c
504
printk(KERN_ERR "matroxfb: Memory PLL not locked after 5 secs\n");
drivers/video/fbdev/matrox/matroxfb_Ti3026.c
540
printk(KERN_ERR "matroxfb: Pixel PLL not locked after 5 secs\n");
drivers/video/fbdev/matrox/matroxfb_Ti3026.c
631
printk(KERN_ERR "matroxfb: Pixel PLL not locked after 5 secs\n");
drivers/video/fbdev/matrox/matroxfb_Ti3026.c
653
printk(KERN_ERR "matroxfb: Loop PLL not locked after 5 secs\n");
drivers/video/fbdev/matrox/matroxfb_base.c
1629
printk(KERN_ERR "matroxfb: Unknown outputs setting\n");
drivers/video/fbdev/matrox/matroxfb_base.c
1658
printk(KERN_INFO "matroxfb: Matrox %s detected\n", b->name);
drivers/video/fbdev/matrox/matroxfb_base.c
1707
printk(KERN_ERR "matroxfb: control registers are not available, matroxfb disabled\n");
drivers/video/fbdev/matrox/matroxfb_base.c
1711
printk(KERN_ERR "matroxfb: video RAM is not available in PCI address space, matroxfb disabled\n");
drivers/video/fbdev/matrox/matroxfb_base.c
1732
printk(KERN_ERR "matroxfb: cannot ioremap(%lX, 16384), matroxfb disabled\n", ctrlptr_phys);
drivers/video/fbdev/matrox/matroxfb_base.c
1740
printk(KERN_ERR "matroxfb: cannot ioremap(%lX, %d), matroxfb disabled\n",
drivers/video/fbdev/matrox/matroxfb_base.c
1756
printk(KERN_WARNING "matroxfb: Disabling PCI retries due to i82437 present\n");
drivers/video/fbdev/matrox/matroxfb_base.c
1778
printk(KERN_ERR "matroxfb: cannot determine memory size\n");
drivers/video/fbdev/matrox/matroxfb_base.c
1929
printk(KERN_INFO "matroxfb: %dx%dx%dbpp (virtual: %dx%d)\n",
drivers/video/fbdev/matrox/matroxfb_base.c
1932
printk(KERN_INFO "matroxfb: framebuffer at 0x%lX, mapped to 0x%p, size %d\n",
drivers/video/fbdev/matrox/matroxfb_base.c
2277
printk(KERN_ERR "Invalid vesa mode 0x%04X\n", vesa);
drivers/video/fbdev/matrox/matroxfb_base.c
2352
printk(KERN_ERR "matroxfb: unsupported color depth\n");
drivers/video/fbdev/matrox/matroxfb_base.c
251
printk(KERN_DEBUG "matroxfb: someone disabled IRQ [%08X]\n", ien);
drivers/video/fbdev/matrox/matroxfb_base.c
2594
printk(KERN_ERR "matroxfb: depth %d is not supported, using default\n", depth);
drivers/video/fbdev/matrox/matroxfb_base.h
56
#define DBG(x) printk(KERN_DEBUG "matroxfb: %s\n", (x));
drivers/video/fbdev/matrox/matroxfb_base.h
86
#define dprintk(X...) printk(X)
drivers/video/fbdev/matrox/matroxfb_crtc2.c
641
printk(KERN_ERR "matroxfb_crtc2: Internal consistency check failed: crtc2 already present: %p\n",
drivers/video/fbdev/matrox/matroxfb_crtc2.c
653
printk(KERN_ERR "matroxfb_crtc2: secondary head failed to register\n");
drivers/video/fbdev/matrox/matroxfb_crtc2.c
656
printk(KERN_INFO "matroxfb_crtc2: secondary head of fb%u was registered as fb%u\n",
drivers/video/fbdev/matrox/matroxfb_crtc2.c
675
printk(KERN_ERR "matroxfb_crtc2: Internal consistency check failed: crtc2 mismatch at unload: %p != %p\n",
drivers/video/fbdev/matrox/matroxfb_crtc2.c
677
printk(KERN_ERR "matroxfb_crtc2: Expect kernel crash after module unload.\n");
drivers/video/fbdev/matrox/matroxfb_crtc2.c
684
printk(KERN_INFO "matroxfb_crtc2: fb%u unregistered\n", id);
drivers/video/fbdev/matrox/matroxfb_crtc2.c
703
printk(KERN_ERR "matroxfb_crtc2: CRTC2 framebuffer failed to register\n");
drivers/video/fbdev/matrox/matroxfb_maven.c
159
printk(KERN_INFO "ReadReg(%d) failed\n", reg);
drivers/video/fbdev/matrox/matroxfb_maven.c
168
printk(KERN_INFO "WriteReg(%d) failed\n", reg);
drivers/video/fbdev/matrox/matroxfb_maven.c
177
printk(KERN_INFO "WriteRegPair(%d) failed\n", reg);
drivers/video/fbdev/matrox/matroxfb_misc.c
143
printk(KERN_ERR "post_shift_max: %d\n", pll->post_shift_max);
drivers/video/fbdev/matrox/matroxfb_misc.c
144
printk(KERN_ERR "ref_freq: %d\n", pll->ref_freq);
drivers/video/fbdev/matrox/matroxfb_misc.c
145
printk(KERN_ERR "freq: %d\n", freq);
drivers/video/fbdev/matrox/matroxfb_misc.c
146
printk(KERN_ERR "vco_freq_min: %d\n", pll->vco_freq_min);
drivers/video/fbdev/matrox/matroxfb_misc.c
147
printk(KERN_ERR "in_div_min: %d\n", pll->in_div_min);
drivers/video/fbdev/matrox/matroxfb_misc.c
148
printk(KERN_ERR "in_div_max: %d\n", pll->in_div_max);
drivers/video/fbdev/matrox/matroxfb_misc.c
149
printk(KERN_ERR "feed_div_min: %d\n", pll->feed_div_min);
drivers/video/fbdev/matrox/matroxfb_misc.c
150
printk(KERN_ERR "feed_div_max: %d\n", pll->feed_div_max);
drivers/video/fbdev/matrox/matroxfb_misc.c
151
printk(KERN_ERR "fmax: %d\n", fmax);
drivers/video/fbdev/matrox/matroxfb_misc.c
517
printk(KERN_INFO "PInS data found at offset %u\n",
drivers/video/fbdev/matrox/matroxfb_misc.c
731
printk(KERN_INFO "matroxfb: Your Matrox device does not have BIOS\n");
drivers/video/fbdev/matrox/matroxfb_misc.c
735
printk(KERN_INFO "matroxfb: BIOS on your Matrox device does not contain powerup info\n");
drivers/video/fbdev/matrox/matroxfb_misc.c
741
printk(KERN_INFO "matroxfb: Unknown version (%u) of powerup info\n", pins_version);
drivers/video/fbdev/matrox/matroxfb_misc.c
748
printk(KERN_INFO "matroxfb: Invalid powerup info\n");
drivers/video/fbdev/matrox/matroxfb_misc.c
763
printk(KERN_DEBUG "matroxfb: Powerup info version %u is not yet supported\n", pins_version);
drivers/video/fbdev/matrox/matroxfb_misc.c
790
printk(KERN_INFO "matroxfb: Unable to map legacy BIOS\n");
drivers/video/fbdev/matrox/matroxfb_misc.c
796
printk(KERN_INFO "matroxfb: Legacy BIOS is for %04X:%04X, while this device is %04X:%04X\n",
drivers/video/fbdev/matrox/matroxfb_misc.c
806
printk(KERN_INFO "PInS memtype = %u\n",
drivers/video/fbdev/maxinefb.c
128
printk(KERN_INFO "Maxinefb: Personal DECstation detected\n");
drivers/video/fbdev/maxinefb.c
129
printk(KERN_INFO "Maxinefb: initializing onboard framebuffer\n");
drivers/video/fbdev/n411.c
113
printk(KERN_ERR "Fail because ACK is already low\n");
drivers/video/fbdev/n411.c
157
printk(KERN_WARNING "no IO addresses supplied\n");
drivers/video/fbdev/n411.c
92
printk(KERN_ERR "timed out waiting for ack\n");
drivers/video/fbdev/neofb.c
1677
printk("neofb: memory mapped IO in use\n");
drivers/video/fbdev/neofb.c
1683
printk("neofb: unable to map memory mapped IO\n");
drivers/video/fbdev/neofb.c
1688
printk(KERN_INFO "neofb: mapped io at %p\n",
drivers/video/fbdev/neofb.c
1719
printk("neofb: frame buffer in use\n");
drivers/video/fbdev/neofb.c
1726
printk("neofb: unable to map screen memory\n");
drivers/video/fbdev/neofb.c
1731
printk(KERN_INFO "neofb: mapped framebuffer at %p\n",
drivers/video/fbdev/neofb.c
1783
printk (KERN_INFO "Autodetected %s display\n",
drivers/video/fbdev/neofb.c
1823
printk(KERN_ERR
drivers/video/fbdev/neofb.c
1836
printk(KERN_INFO "Panel is a %dx%d %s %s display\n",
drivers/video/fbdev/neofb.c
1856
printk(KERN_DEBUG "--- Neo extended register dump ---\n");
drivers/video/fbdev/neofb.c
1858
printk(KERN_DEBUG "CR %p: %p\n", (void *) w,
drivers/video/fbdev/neofb.c
1861
printk(KERN_DEBUG "GR %p: %p\n", (void *) w,
drivers/video/fbdev/neofb.c
2059
printk(KERN_ERR "neofb: Unable to find usable video mode.\n");
drivers/video/fbdev/neofb.c
2078
printk(KERN_INFO "neofb v" NEOFB_VERSION
drivers/video/fbdev/neofb.c
241
printk(KERN_DEBUG "neoVCLK: f:%ld NumLow=%d NumHi=%d Den=%d Df=%ld\n",
drivers/video/fbdev/neofb.c
538
printk(KERN_ERR
drivers/video/fbdev/neofb.c
596
printk(KERN_INFO
drivers/video/fbdev/neofb.c
628
printk(KERN_INFO
drivers/video/fbdev/neofb.c
682
printk(KERN_WARNING "neofb: no support for %dbpp\n",
drivers/video/fbdev/nvidia/nv_accel.c
104
printk("nvidiafb: DMA Sync lockup\n");
drivers/video/fbdev/nvidia/nv_accel.c
139
printk("DMA Get lockup\n");
drivers/video/fbdev/nvidia/nv_accel.c
152
printk("nvidiafb: DMA Wait Lockup\n");
drivers/video/fbdev/nvidia/nv_accel.c
91
printk("nvidiafb: DMA Flush lockup\n");
drivers/video/fbdev/nvidia/nv_backlight.c
105
printk(KERN_WARNING "nvidia: Backlight registration failed\n");
drivers/video/fbdev/nvidia/nv_backlight.c
118
printk("nvidia: Backlight initialized (%s)\n", name);
drivers/video/fbdev/nvidia/nv_backlight.c
130
printk("nvidia: Backlight unloaded\n");
drivers/video/fbdev/nvidia/nv_hw.c
734
printk("nvidiafb: your nForce DIMMs are not arranged "
drivers/video/fbdev/nvidia/nv_of.c
74
printk(KERN_DEBUG "nvidiafb: Found OF EDID for head %d\n", conn);
drivers/video/fbdev/nvidia/nv_setup.c
169
printk("nvidiafb: CRTC%i analog found\n", output);
drivers/video/fbdev/nvidia/nv_setup.c
171
printk("nvidiafb: CRTC%i analog not found\n", output);
drivers/video/fbdev/nvidia/nv_setup.c
402
printk("nvidiafb: EDID found from BUS1\n");
drivers/video/fbdev/nvidia/nv_setup.c
420
printk("nvidiafb: HW is currently programmed for %s\n",
drivers/video/fbdev/nvidia/nv_setup.c
429
printk("nvidiafb: Forcing display type to %s as "
drivers/video/fbdev/nvidia/nv_setup.c
490
printk("nvidiafb: EDID found from BUS1\n");
drivers/video/fbdev/nvidia/nv_setup.c
498
printk("nvidiafb: EDID found from BUS2\n");
drivers/video/fbdev/nvidia/nv_setup.c
506
printk("nvidiafb: CRTC 0 is currently programmed for "
drivers/video/fbdev/nvidia/nv_setup.c
511
printk("nvidiafb: CRTC 1 is currently programmed "
drivers/video/fbdev/nvidia/nv_setup.c
516
printk("nvidiafb: CRTC %i appears to have a "
drivers/video/fbdev/nvidia/nv_setup.c
521
printk("nvidiafb: CRTC %i appears to have a "
drivers/video/fbdev/nvidia/nv_setup.c
527
printk("nvidiafb: CRTC 0 is currently programmed "
drivers/video/fbdev/nvidia/nv_setup.c
533
printk("nvidiafb: CRTC 1 is currently programmed for "
drivers/video/fbdev/nvidia/nv_setup.c
546
printk("nvidiafb: Unable to detect display "
drivers/video/fbdev/nvidia/nv_setup.c
549
printk("...On a laptop, assuming "
drivers/video/fbdev/nvidia/nv_setup.c
553
printk("...Using default of CRT\n");
drivers/video/fbdev/nvidia/nv_setup.c
558
printk("nvidiafb: Forcing display type to %s as "
drivers/video/fbdev/nvidia/nv_setup.c
566
printk("nvidiafb: Unable to detect which "
drivers/video/fbdev/nvidia/nv_setup.c
572
printk("...Defaulting to CRTCNumber %i\n",
drivers/video/fbdev/nvidia/nv_setup.c
576
printk("nvidiafb: Forcing CRTCNumber %i as "
drivers/video/fbdev/nvidia/nv_setup.c
616
printk("nvidiafb: Using %s on CRTC %i\n",
drivers/video/fbdev/nvidia/nv_setup.c
625
printk("nvidiafb: Panel size is %i x %i\n", par->fpWidth, par->fpHeight);
drivers/video/fbdev/nvidia/nv_setup.c
639
printk("nvidiafb: Panel is %s\n", par->LVDS ? "LVDS" : "TMDS");
drivers/video/fbdev/nvidia/nvidia.c
1213
printk(KERN_INFO PFX "Device ID: %x \n", id);
drivers/video/fbdev/nvidia/nvidia.c
1225
printk(KERN_INFO PFX "Subsystem ID: %x \n", id);
drivers/video/fbdev/nvidia/nvidia.c
1296
printk(KERN_ERR PFX "cannot enable PCI device\n");
drivers/video/fbdev/nvidia/nvidia.c
1310
printk(KERN_ERR PFX "cannot ioremap MMIO base\n");
drivers/video/fbdev/nvidia/nvidia.c
1317
printk(KERN_ERR PFX "unknown NV_ARCH\n");
drivers/video/fbdev/nvidia/nvidia.c
1337
printk(KERN_ERR PFX "cannot request PCI regions\n");
drivers/video/fbdev/nvidia/nvidia.c
1343
printk(KERN_INFO PFX "flatpanel support enabled\n");
drivers/video/fbdev/nvidia/nvidia.c
1387
printk(KERN_ERR PFX "cannot ioremap FB base\n");
drivers/video/fbdev/nvidia/nvidia.c
1401
printk(KERN_ERR PFX "error setting initial video mode\n");
drivers/video/fbdev/nvidia/nvidia.c
1410
printk(KERN_ERR PFX "error registering nVidia framebuffer\n");
drivers/video/fbdev/nvidia/nvidia.c
1417
printk(KERN_INFO PFX
drivers/video/fbdev/nvidia/nvidia.c
259
printk(" SEQ[%02x] = %08x\n", i, state->seq[i]);
drivers/video/fbdev/nvidia/nvidia.c
274
printk("CRTC[%02x] = %08x\n", i, state->crtc[i]);
drivers/video/fbdev/nvidia/nvidia.c
282
printk(" GRA[%02x] = %08x\n", i, state->gra[i]);
drivers/video/fbdev/nvidia/nvidia.c
289
printk("ATTR[%02x] = %08x\n", i, state->attr[i]);
drivers/video/fbdev/nvidia/nvidia.c
36
#define NVTRACE printk
drivers/video/fbdev/nvidia/nvidia.c
38
#define NVTRACE if (0) printk
drivers/video/fbdev/nvidia/nvidia.c
47
printk( "Assertion failed! %s,%s,%s,line=%d\n",\
drivers/video/fbdev/nvidia/nvidia.c
628
printk(KERN_INFO PFX "Flat panel dithering %s\n",
drivers/video/fbdev/nvidia/nvidia.c
861
printk(KERN_ERR PFX "mode out of range of flat "
drivers/video/fbdev/nvidia/nvidia.c
894
printk("nvidiafb: required video memory, "
drivers/video/fbdev/offb.c
406
printk(KERN_INFO
drivers/video/fbdev/offb.c
410
printk(KERN_ERR "%pOF: can't use depth = %d\n", dp, depth);
drivers/video/fbdev/omap/lcd_dma.c
106
printk(KERN_ERR "DMA mirror is not supported in 1510 mode\n");
drivers/video/fbdev/omap/lcd_dma.c
126
printk(KERN_ERR "DMA scale is not supported in 1510 mode\n");
drivers/video/fbdev/omap/lcd_dma.c
291
printk(KERN_WARNING "Spurious LCD DMA IRQ\n");
drivers/video/fbdev/omap/lcd_dma.c
310
printk(KERN_ERR "LCD DMA channel already reserved\n");
drivers/video/fbdev/omap/lcd_dma.c
337
printk(KERN_ERR "LCD DMA is not reserved\n");
drivers/video/fbdev/omap/lcd_dma.c
95
printk(KERN_ERR "DMA rotation is not supported in 1510 mode\n");
drivers/video/fbdev/omap2/omapfb/dss/dsi.c
575
printk(KERN_INFO "DSI(%s): %u us + %u us = %u us (%uHz), "
drivers/video/fbdev/omap2/omapfb/dss/dss.c
1133
printk(KERN_INFO "OMAP DSS rev %d.%d\n",
drivers/video/fbdev/omap2/omapfb/dss/dss.h
32
printk(KERN_ERR "omapdss " DSS_SUBSYS_NAME " error: " format, \
drivers/video/fbdev/omap2/omapfb/dss/dss.h
36
printk(KERN_ERR "omapdss error: " format, ## __VA_ARGS__)
drivers/video/fbdev/omap2/omapfb/dss/dss.h
41
printk(KERN_INFO "omapdss " DSS_SUBSYS_NAME ": " format, \
drivers/video/fbdev/omap2/omapfb/dss/dss.h
45
printk(KERN_INFO "omapdss: " format, ## __VA_ARGS__)
drivers/video/fbdev/omap2/omapfb/dss/dss.h
50
printk(KERN_WARNING "omapdss " DSS_SUBSYS_NAME ": " format, \
drivers/video/fbdev/omap2/omapfb/dss/dss.h
54
printk(KERN_WARNING "omapdss: " format, ## __VA_ARGS__)
drivers/video/fbdev/omap2/omapfb/omapfb.h
29
printk(KERN_DEBUG "OMAPFB: " format, ## __VA_ARGS__); \
drivers/video/fbdev/omap2/omapfb/vrfb.c
239
printk(KERN_ERR "vrfb: ioremap failed\n");
drivers/video/fbdev/p9100.c
300
printk(KERN_INFO "%pOF: p9100 at %lx:%lx\n",
drivers/video/fbdev/platinumfb.c
126
printk (KERN_ERR "platinumfb_set_par: error calling"
drivers/video/fbdev/platinumfb.c
146
printk("line_length: %x\n", info->fix.line_length);
drivers/video/fbdev/platinumfb.c
344
printk(KERN_INFO "platinumfb: Monitor sense value = 0x%x, ", sense);
drivers/video/fbdev/platinumfb.c
366
printk("platinumfb: Using video mode %d and color mode %d.\n", default_vmode, default_cmode);
drivers/video/fbdev/platinumfb.c
371
printk("mac_vmode_to_var(%d, %d,) failed\n", default_vmode, default_cmode);
drivers/video/fbdev/platinumfb.c
376
printk(KERN_ERR "platinumfb: mac_vmode_to_var() failed\n");
drivers/video/fbdev/platinumfb.c
443
printk(KERN_ERR "platinum_var_to_par: mac_var_to_vmode unsuccessful.\n");
drivers/video/fbdev/platinumfb.c
444
printk(KERN_ERR "platinum_var_to_par: var->xres = %d\n", var->xres);
drivers/video/fbdev/platinumfb.c
445
printk(KERN_ERR "platinum_var_to_par: var->yres = %d\n", var->yres);
drivers/video/fbdev/platinumfb.c
446
printk(KERN_ERR "platinum_var_to_par: var->xres_virtual = %d\n", var->xres_virtual);
drivers/video/fbdev/platinumfb.c
447
printk(KERN_ERR "platinum_var_to_par: var->yres_virtual = %d\n", var->yres_virtual);
drivers/video/fbdev/platinumfb.c
448
printk(KERN_ERR "platinum_var_to_par: var->bits_per_pixel = %d\n", var->bits_per_pixel);
drivers/video/fbdev/platinumfb.c
449
printk(KERN_ERR "platinum_var_to_par: var->pixclock = %d\n", var->pixclock);
drivers/video/fbdev/platinumfb.c
450
printk(KERN_ERR "platinum_var_to_par: var->vmode = %d\n", var->vmode);
drivers/video/fbdev/platinumfb.c
455
printk(KERN_ERR "platinum_var_to_par, vmode %d not valid.\n", vmode);
drivers/video/fbdev/platinumfb.c
460
printk(KERN_ERR "platinum_var_to_par, not enough ram for vmode %d, cmode %d.\n", vmode, cmode);
drivers/video/fbdev/platinumfb.c
562
printk(KERN_ERR "platinumfb: Can't request framebuffer !\n");
drivers/video/fbdev/platinumfb.c
600
printk(KERN_INFO "platinumfb: Total VRAM = %dMB (%d%d%d%d)\n",
drivers/video/fbdev/platinumfb.c
612
printk(KERN_INFO "platinumfb: DACula type 0x3c\n");
drivers/video/fbdev/platinumfb.c
616
printk(KERN_INFO "platinumfb: DACula type 0x84\n");
drivers/video/fbdev/platinumfb.c
620
printk(KERN_INFO "platinumfb: Unknown DACula type: %x\n", pinfo->dactype);
drivers/video/fbdev/pm2fb.c
1533
printk(KERN_WARNING "pm2fb: Can't enable pdev: %d\n", err);
drivers/video/fbdev/pm2fb.c
1575
printk(KERN_WARNING "pm2fb: Can't reserve regbase.\n");
drivers/video/fbdev/pm2fb.c
1581
printk(KERN_WARNING "pm2fb: Can't remap %s register area.\n",
drivers/video/fbdev/pm2fb.c
1644
printk(KERN_WARNING "pm2fb: Can't reserve smem.\n");
drivers/video/fbdev/pm2fb.c
1650
printk(KERN_WARNING "pm2fb: Can't ioremap smem area.\n");
drivers/video/fbdev/pm2fb.c
1679
printk(KERN_DEBUG "disabling acceleration\n");
drivers/video/fbdev/pm2fb.c
56
printk(KERN_DEBUG "pm2fb: %s: " a, __func__ , ## b)
drivers/video/fbdev/pm3fb.c
1238
printk(KERN_WARNING "pm3fb: Can't reserve smem.\n");
drivers/video/fbdev/pm3fb.c
1244
printk(KERN_WARNING "pm3fb: Can't ioremap smem area.\n");
drivers/video/fbdev/pm3fb.c
1327
printk(KERN_WARNING "pm3fb: Can't enable PCI dev: %d\n", err);
drivers/video/fbdev/pm3fb.c
1353
printk(KERN_WARNING "pm3fb: Can't reserve regbase.\n");
drivers/video/fbdev/pm3fb.c
1359
printk(KERN_WARNING "pm3fb: Can't remap %s register area.\n",
drivers/video/fbdev/pm3fb.c
1369
printk(KERN_WARNING "pm3fb: Can't find memory on board.\n");
drivers/video/fbdev/pm3fb.c
1374
printk(KERN_WARNING "pm3fb: Can't reserve smem.\n");
drivers/video/fbdev/pm3fb.c
1380
printk(KERN_WARNING "pm3fb: Can't ioremap smem area.\n");
drivers/video/fbdev/pm3fb.c
1402
printk(KERN_DEBUG "disabling acceleration\n");
drivers/video/fbdev/pm3fb.c
46
printk(KERN_DEBUG "pm3fb: %s: " a, __func__ , ## b)
drivers/video/fbdev/pmag-aa-fb.c
180
printk(KERN_ERR "%s: Cannot reserve FB region\n",
drivers/video/fbdev/pmag-aa-fb.c
190
printk(KERN_ERR "%s: Cannot map MMIO\n", dev_name(dev));
drivers/video/fbdev/pmag-aa-fb.c
202
printk(KERN_ERR "%s: Cannot map FB\n", dev_name(dev));
drivers/video/fbdev/pmag-aa-fb.c
218
printk(KERN_ERR "%s: Cannot register framebuffer\n",
drivers/video/fbdev/pmag-ba-fb.c
158
printk(KERN_ERR "%s: Cannot allocate color map\n",
drivers/video/fbdev/pmag-ba-fb.c
172
printk(KERN_ERR "%s: Cannot reserve FB region\n",
drivers/video/fbdev/pmag-ba-fb.c
182
printk(KERN_ERR "%s: Cannot map MMIO\n", dev_name(dev));
drivers/video/fbdev/pmag-ba-fb.c
193
printk(KERN_ERR "%s: Cannot map FB\n", dev_name(dev));
drivers/video/fbdev/pmag-ba-fb.c
203
printk(KERN_ERR "%s: Cannot register framebuffer\n",
drivers/video/fbdev/pmagb-b-fb.c
265
printk(KERN_ERR "%s: Cannot allocate color map\n",
drivers/video/fbdev/pmagb-b-fb.c
279
printk(KERN_ERR "%s: Cannot reserve FB region\n",
drivers/video/fbdev/pmagb-b-fb.c
289
printk(KERN_ERR "%s: Cannot map MMIO\n", dev_name(dev));
drivers/video/fbdev/pmagb-b-fb.c
300
printk(KERN_ERR "%s: Cannot map FB\n", dev_name(dev));
drivers/video/fbdev/pmagb-b-fb.c
314
printk(KERN_ERR "%s: Cannot register framebuffer\n",
drivers/video/fbdev/pvr2fb.c
1115
printk(KERN_ERR "pvr2fb: Failed init of %s device\n",
drivers/video/fbdev/pvr2fb.c
795
printk(KERN_ERR "pvr2fb: Failed to remap smem space\n");
drivers/video/fbdev/pvr2fb.c
802
printk(KERN_ERR "pvr2fb: Failed to remap mmio space\n");
drivers/video/fbdev/pvr2fb.c
957
printk(KERN_ERR "pvr2fb: PCI enable failed\n");
drivers/video/fbdev/pvr2fb.c
963
printk(KERN_ERR "pvr2fb: PCI request regions failed\n");
drivers/video/fbdev/pxa3xx-gcu.c
124
printk(level "%lld.%03ld.%03ld - %-17s: %-21s (%s, " \
drivers/video/fbdev/pxa3xx-gcu.c
176
printk(KERN_DEBUG "== PXA3XX-GCU DUMP ==\n"
drivers/video/fbdev/q40fb.c
112
printk(KERN_ERR "Unable to register Q40 frame buffer\n");
drivers/video/fbdev/riva/fbdev.c
1088
printk(KERN_ERR PFX
drivers/video/fbdev/riva/fbdev.c
1659
printk(KERN_DEBUG PFX "disabling acceleration\n");
drivers/video/fbdev/riva/fbdev.c
1727
printk(PFX "Found EDID Block from BUS %i\n", i);
drivers/video/fbdev/riva/fbdev.c
1778
printk(PFX "could not retrieve EDID from OF\n");
drivers/video/fbdev/riva/fbdev.c
1781
printk(PFX "could not retrieve EDID from DDC/I2C\n");
drivers/video/fbdev/riva/fbdev.c
1875
printk(KERN_ERR PFX "cannot enable PCI device\n");
drivers/video/fbdev/riva/fbdev.c
1881
printk(KERN_ERR PFX "cannot request PCI regions\n");
drivers/video/fbdev/riva/fbdev.c
1889
printk(KERN_INFO PFX "nVidia device/chipset %X\n",default_par->Chipset);
drivers/video/fbdev/riva/fbdev.c
1892
printk(KERN_ERR PFX "unknown NV_ARCH\n");
drivers/video/fbdev/riva/fbdev.c
1906
printk(KERN_INFO PFX "flatpanel support enabled\n");
drivers/video/fbdev/riva/fbdev.c
1927
printk(KERN_ERR PFX "cannot ioremap MMIO base\n");
drivers/video/fbdev/riva/fbdev.c
1940
printk(KERN_ERR PFX "cannot ioremap PRAMIN region\n");
drivers/video/fbdev/riva/fbdev.c
1967
printk(KERN_ERR PFX "cannot ioremap FB base\n");
drivers/video/fbdev/riva/fbdev.c
1984
printk(KERN_ERR PFX "error setting initial video mode\n");
drivers/video/fbdev/riva/fbdev.c
1995
printk(KERN_ERR PFX
drivers/video/fbdev/riva/fbdev.c
2003
printk(KERN_INFO PFX
drivers/video/fbdev/riva/fbdev.c
298
printk(KERN_WARNING "riva: Backlight registration failed\n");
drivers/video/fbdev/riva/fbdev.c
311
printk("riva: Backlight initialized (%s)\n", name);
drivers/video/fbdev/riva/fbdev.c
324
printk("riva: Backlight unloaded\n");
drivers/video/fbdev/riva/fbdev.c
62
#define NVTRACE printk
drivers/video/fbdev/riva/fbdev.c
64
#define NVTRACE if(0) printk
drivers/video/fbdev/riva/fbdev.c
73
printk( "Assertion failed! %s,%s,%s,line=%d\n",\
drivers/video/fbdev/riva/fbdev.c
832
printk(KERN_WARNING PFX
drivers/video/fbdev/riva/fbdev.c
840
printk(KERN_ERR PFX
drivers/video/fbdev/riva/fbdev.c
848
printk(KERN_INFO PFX
drivers/video/fbdev/riva/fbdev.c
854
printk(KERN_WARNING PFX
drivers/video/fbdev/riva/fbdev.c
860
printk(KERN_WARNING PFX
drivers/video/fbdev/riva/fbdev.c
865
printk(KERN_ERR PFX
drivers/video/fbdev/riva/fbdev.c
874
printk(KERN_WARNING PFX
drivers/video/fbdev/riva/fbdev.c
881
printk(KERN_ERR PFX
drivers/video/fbdev/riva/fbdev.c
887
printk(KERN_ERR PFX
drivers/video/fbdev/riva/nv_driver.c
368
printk(KERN_INFO PFX
drivers/video/fbdev/riva/nv_driver.c
88
printk(KERN_INFO PFX
drivers/video/fbdev/riva/nv_driver.c
93
printk(KERN_INFO PFX
drivers/video/fbdev/s1d13xxxfb.c
46
#define dbg(fmt, args...) do { printk(KERN_INFO fmt, ## args); } while(0)
drivers/video/fbdev/s1d13xxxfb.c
55
#define dbg_blit(fmt, args...) do { printk(KERN_INFO BLIT fmt, ## args); } while (0)
drivers/video/fbdev/s1d13xxxfb.c
662
printk(KERN_WARNING PFX "Warning: LCD and CRT detected, using LCD\n");
drivers/video/fbdev/s1d13xxxfb.c
778
printk(KERN_INFO "Epson S1D13XXX FB Driver\n");
drivers/video/fbdev/s1d13xxxfb.c
827
printk(KERN_ERR PFX "unable to map registers\n");
drivers/video/fbdev/s1d13xxxfb.c
837
printk(KERN_ERR PFX "unable to map framebuffer\n");
drivers/video/fbdev/s1d13xxxfb.c
859
printk(KERN_INFO PFX "chip production id %i = %s\n",
drivers/video/fbdev/s1d13xxxfb.c
861
printk(KERN_INFO PFX "chip revision %i\n", revision);
drivers/video/fbdev/s1d13xxxfb.c
863
printk(KERN_INFO PFX
drivers/video/fbdev/s1d13xxxfb.c
866
printk(KERN_INFO PFX "please contact maintainer\n");
drivers/video/fbdev/s1d13xxxfb.c
876
printk(KERN_INFO PFX "regs mapped at 0x%p, fb %d KiB mapped at 0x%p\n",
drivers/video/fbdev/s1d13xxxfb.c
933
printk(KERN_ERR PFX "no memory to save screen\n");
drivers/video/fbdev/s1d13xxxfb.c
946
printk(KERN_ERR PFX "no memory to save registers");
drivers/video/fbdev/savage/savagefb.h
22
# define DBG(x) printk (KERN_DEBUG "savagefb: %s\n", (x));
drivers/video/fbdev/savage/savagefb_driver.c
1733
printk("savagefb: unable to map memory mapped IO\n");
drivers/video/fbdev/savage/savagefb_driver.c
1736
printk(KERN_INFO "savagefb: mapped io at %p\n",
drivers/video/fbdev/savage/savagefb_driver.c
1780
printk("savagefb: unable to map screen memory\n");
drivers/video/fbdev/savage/savagefb_driver.c
1783
printk(KERN_INFO "savagefb: mapped framebuffer at %p, "
drivers/video/fbdev/savage/savagefb_driver.c
1891
printk(KERN_INFO "savagefb: probed videoram: %dk\n", videoRam);
drivers/video/fbdev/savage/savagefb_driver.c
1938
printk(KERN_INFO "savagefb: Detected current MCLK value of %d kHz\n",
drivers/video/fbdev/savage/savagefb_driver.c
1953
printk("savagefb: Digital Flat Panel Detected\n");
drivers/video/fbdev/savage/savagefb_driver.c
2003
printk(KERN_INFO "savagefb: %dx%d %s LCD panel detected %s\n",
drivers/video/fbdev/savage/savagefb_driver.c
2013
printk(KERN_INFO "savagefb: Limiting video mode to "
drivers/video/fbdev/savage/savagefb_driver.c
2196
printk(KERN_ERR "cannot request PCI regions\n");
drivers/video/fbdev/savage/savagefb_driver.c
2242
printk(KERN_WARNING "No CVT mode found for panel\n");
drivers/video/fbdev/savage/savagefb_driver.c
2298
printk(KERN_INFO "savagefb v" SAVAGEFB_VERSION ": "
drivers/video/fbdev/savage/savagefb_driver.c
2312
printk(KERN_INFO "fb: S3 %s frame buffer device\n",
drivers/video/fbdev/savage/savagefb_driver.c
425
printk(KERN_ERR "invalid frequency %ld Khz\n", freq);
drivers/video/fbdev/savage/savagefb_driver.c
429
printk(KERN_ERR "invalid frequency %ld Khz\n", freq);
drivers/video/fbdev/savage/savagefb_driver.c
514
printk(KERN_DEBUG "SR x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC xD xE "
drivers/video/fbdev/savage/savagefb_driver.c
519
printk(KERN_DEBUG "\nSR%xx ", i >> 4);
drivers/video/fbdev/savage/savagefb_driver.c
521
printk(KERN_DEBUG " %02x", vga_in8(0x3c5, par));
drivers/video/fbdev/savage/savagefb_driver.c
524
printk(KERN_DEBUG "\n\nCR x0 x1 x2 x3 x4 x5 x6 x7 x8 x9 xA xB xC "
drivers/video/fbdev/savage/savagefb_driver.c
529
printk(KERN_DEBUG "\nCR%xx ", i >> 4);
drivers/video/fbdev/savage/savagefb_driver.c
531
printk(KERN_DEBUG " %02x", vga_in8(vgaCRReg, par));
drivers/video/fbdev/savage/savagefb_driver.c
534
printk(KERN_DEBUG "\n\n");
drivers/video/fbdev/savage/savagefb_driver.c
934
printk(KERN_INFO "Mode (%dx%d) larger than the LCD panel "
drivers/video/fbdev/sh7760fb.c
386
printk(KERN_ERR "colinfo\n");
drivers/video/fbdev/sh7760fb.c
532
printk(KERN_INFO "%s: memory at phys 0x%08lx-0x%08lx, size %ld KiB\n",
drivers/video/fbdev/sis/init301.c
1475
printk(KERN_DEBUG "sisfb: (init301: VBInfo= 0x%04x, SetFlag=0x%04x)\n",
drivers/video/fbdev/sis/init301.c
2463
printk(KERN_DEBUG "sisfb: (LCDInfo=0x%04x LCDResInfo=0x%02x LCDTypeInfo=0x%02x)\n",
drivers/video/fbdev/sis/initextlfb.c
56
printk(KERN_ERR "Could not find mode %x\n", ModeNo);
drivers/video/fbdev/sis/sis.h
32
#define DPRINTK(fmt, args...) printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
drivers/video/fbdev/sis/sis.h
33
#define TWDEBUG(x) printk(KERN_INFO x "\n");
drivers/video/fbdev/sis/sis.h
39
#define SISFAIL(x) do { printk(x "\n"); return -EINVAL; } while(0)
drivers/video/fbdev/sis/sis_main.c
1077
printk(KERN_ERR "sisfb: Unsupported depth %d", ivideo->video_bpp);
drivers/video/fbdev/sis/sis_main.c
1173
printk(KERN_ERR "sisfb: Setting mode[0x%x] failed\n", ivideo->mode_no);
drivers/video/fbdev/sis/sis_main.c
1248
printk(KERN_ERR "sisfb: Mode %dx%dx%d not supported\n", var->xres,
drivers/video/fbdev/sis/sis_main.c
1498
printk(KERN_DEBUG
drivers/video/fbdev/sis/sis_main.c
1507
printk(KERN_ERR
drivers/video/fbdev/sis/sis_main.c
151
printk(KERN_ERR "sisfb: Invalid mode. Using default.\n");
drivers/video/fbdev/sis/sis_main.c
1572
printk(KERN_INFO
drivers/video/fbdev/sis/sis_main.c
1711
printk(KERN_INFO
drivers/video/fbdev/sis/sis_main.c
1765
printk(KERN_INFO
drivers/video/fbdev/sis/sis_main.c
1776
printk(KERN_INFO
drivers/video/fbdev/sis/sis_main.c
1787
printk(KERN_INFO
drivers/video/fbdev/sis/sis_main.c
179
printk(KERN_ERR "sisfb: Invalid VESA mode 0x%x'\n", vesamode);
drivers/video/fbdev/sis/sis_main.c
193
printk(KERN_ERR "sisfb: Internal error, using default mode.\n");
drivers/video/fbdev/sis/sis_main.c
201
printk(KERN_ERR "sisfb: Mode 'none' not supported anymore. Using default.\n");
drivers/video/fbdev/sis/sis_main.c
2095
printk(KERN_ERR "sisfb: YPbPr not supported\n");
drivers/video/fbdev/sis/sis_main.c
2104
printk(KERN_ERR "sisfb: HiVision not supported\n");
drivers/video/fbdev/sis/sis_main.c
2114
printk(KERN_ERR "sisfb: PALM/PALN/NTSCJ not supported\n");
drivers/video/fbdev/sis/sis_main.c
2462
printk(KERN_INFO "%s %s SCART output\n", stdstr, tvstr);
drivers/video/fbdev/sis/sis_main.c
2465
printk(KERN_INFO "%s secondary VGA connection\n", stdstr);
drivers/video/fbdev/sis/sis_main.c
2482
printk(KERN_INFO "%s %s YPbPr component output\n", stdstr, tvstr);
drivers/video/fbdev/sis/sis_main.c
2493
printk(KERN_INFO "%s %s SVIDEO output\n", stdstr, tvstr);
drivers/video/fbdev/sis/sis_main.c
2498
printk(KERN_INFO "%s %s COMPOSITE output\n", stdstr, tvstr);
drivers/video/fbdev/sis/sis_main.c
255
printk(KERN_ERR "sisfb: Invalid mode '%s'\n", nameptr);
drivers/video/fbdev/sis/sis_main.c
2576
printk(KERN_INFO
drivers/video/fbdev/sis/sis_main.c
2581
printk(KERN_INFO "%s SVIDEO output\n", stdstr);
drivers/video/fbdev/sis/sis_main.c
2586
printk(KERN_INFO "%s CVBS output\n", stdstr);
drivers/video/fbdev/sis/sis_main.c
2625
printk(KERN_INFO "%s CVBS output\n", stdstr);
drivers/video/fbdev/sis/sis_main.c
2631
printk(KERN_INFO "%s SVIDEO output\n", stdstr);
drivers/video/fbdev/sis/sis_main.c
2637
printk(KERN_INFO "%s SCART output\n", stdstr);
drivers/video/fbdev/sis/sis_main.c
2666
printk(KERN_INFO "%s SiS301 %s\n", stdstr, bridgestr);
drivers/video/fbdev/sis/sis_main.c
2674
printk(KERN_INFO "%s SiS301B-DH %s\n", stdstr, bridgestr);
drivers/video/fbdev/sis/sis_main.c
2676
printk(KERN_INFO "%s SiS301B %s\n", stdstr, bridgestr);
drivers/video/fbdev/sis/sis_main.c
2681
printk(KERN_INFO "%s SiS301C %s\n", stdstr, bridgestr);
drivers/video/fbdev/sis/sis_main.c
2685
printk(KERN_INFO "%s SiS301LV %s\n", stdstr, bridgestr);
drivers/video/fbdev/sis/sis_main.c
2691
printk(KERN_INFO "%s SiS302LV %s\n", stdstr, bridgestr);
drivers/video/fbdev/sis/sis_main.c
2695
printk(KERN_INFO "%s SiS301C(P4) %s\n", stdstr, bridgestr);
drivers/video/fbdev/sis/sis_main.c
2699
printk(KERN_INFO "%s SiS302ELV %s\n", stdstr, bridgestr);
drivers/video/fbdev/sis/sis_main.c
2707
printk(KERN_INFO "%s SiS302B %s\n", stdstr, bridgestr);
drivers/video/fbdev/sis/sis_main.c
2773
printk(KERN_INFO "%s LVDS transmitter\n", stdstr);
drivers/video/fbdev/sis/sis_main.c
2776
printk(KERN_INFO "%s Trumpion Zurac LCD scaler\n", stdstr);
drivers/video/fbdev/sis/sis_main.c
2779
printk(KERN_INFO "%s Chrontel TV encoder\n", stdstr);
drivers/video/fbdev/sis/sis_main.c
2782
printk(KERN_INFO "%s Conexant external device\n", stdstr);
drivers/video/fbdev/sis/sis_main.c
281
printk(KERN_ERR "sisfb: Invalid CRT2 type: %s\n", name);
drivers/video/fbdev/sis/sis_main.c
2936
printk(KERN_DEBUG "sisfb: Invalid panel ID (%02x), assuming 1024x768, RGB18\n", reg);
drivers/video/fbdev/sis/sis_main.c
2961
printk(KERN_DEBUG "sisfb: Detected %dx%d flat panel\n",
drivers/video/fbdev/sis/sis_main.c
2981
printk(KERN_INFO "sisfb: Detected LCD PDC 0x%02x\n",
drivers/video/fbdev/sis/sis_main.c
2986
printk(KERN_INFO "sisfb: Using LCD PDC 0x%02x\n",
drivers/video/fbdev/sis/sis_main.c
3039
printk(KERN_INFO
drivers/video/fbdev/sis/sis_main.c
3044
printk(KERN_INFO
drivers/video/fbdev/sis/sis_main.c
3067
printk(KERN_INFO "sisfb: Using LCD PDC 0x%02x (for LCD=CRT2)\n",
drivers/video/fbdev/sis/sis_main.c
3072
printk(KERN_INFO "sisfb: Using LCD PDC1 0x%02x (for LCD=CRT1)\n",
drivers/video/fbdev/sis/sis_main.c
316
printk(KERN_DEBUG "sisfb: Special timing disabled\n");
drivers/video/fbdev/sis/sis_main.c
3172
printk(KERN_INFO "sisfb: Memory heap starting at %dK, size %dK\n",
drivers/video/fbdev/sis/sis_main.c
323
printk(KERN_INFO "sisfb: Special timing for %s %s forced (\"%s\")\n",
drivers/video/fbdev/sis/sis_main.c
332
printk(KERN_WARNING "sisfb: Invalid SpecialTiming parameter, valid are:");
drivers/video/fbdev/sis/sis_main.c
333
printk(KERN_WARNING "\t\"none\" (to disable special timings)\n");
drivers/video/fbdev/sis/sis_main.c
336
printk(KERN_WARNING "\t\"%s\" (for %s %s)\n",
drivers/video/fbdev/sis/sis_main.c
393
printk(KERN_DEBUG "sisfb: Identified [%s %s], special timing applies\n",
drivers/video/fbdev/sis/sis_main.c
3940
printk(KERN_ERR "sisfb: Unknown command 0x%x\n",
drivers/video/fbdev/sis/sis_main.c
396
printk(KERN_DEBUG "sisfb: [specialtiming parameter name: %s]\n",
drivers/video/fbdev/sis/sis_main.c
4035
printk(KERN_INFO "sisfb: Invalid option %s\n", this_opt);
drivers/video/fbdev/sis/sis_main.c
414
printk(KERN_DEBUG "sisfb: Bad EDID header\n");
drivers/video/fbdev/sis/sis_main.c
4140
printk(KERN_ERR
drivers/video/fbdev/sis/sis_main.c
4149
printk(KERN_ERR
drivers/video/fbdev/sis/sis_main.c
419
printk(KERN_INFO "sisfb: EDID version %d not supported\n",
drivers/video/fbdev/sis/sis_main.c
428
printk(KERN_INFO
drivers/video/fbdev/sis/sis_main.c
4477
printk(KERN_DEBUG
drivers/video/fbdev/sis/sis_main.c
4641
printk(KERN_ERR "sisfb: Unable to detect RAM size. Setting default.\n");
drivers/video/fbdev/sis/sis_main.c
526
printk(KERN_INFO "sisfb: CRT%d DDC probing failed\n", crtno + 1);
drivers/video/fbdev/sis/sis_main.c
529
printk(KERN_INFO "sisfb: CRT%d DDC supported\n", crtno + 1);
drivers/video/fbdev/sis/sis_main.c
530
printk(KERN_INFO "sisfb: CRT%d DDC level: %s%s%s%s\n",
drivers/video/fbdev/sis/sis_main.c
544
printk(KERN_INFO "sisfb: Monitor range H %d-%dKHz, V %d-%dHz, Max. dotclock %dMHz\n",
drivers/video/fbdev/sis/sis_main.c
548
printk(KERN_INFO "sisfb: CRT%d DDC EDID corrupt\n", crtno + 1);
drivers/video/fbdev/sis/sis_main.c
551
printk(KERN_INFO "sisfb: CRT%d DDC reading failed\n", crtno + 1);
drivers/video/fbdev/sis/sis_main.c
554
printk(KERN_INFO "sisfb: VESA D&P and FPDI-2 not supported yet\n");
drivers/video/fbdev/sis/sis_main.c
5753
printk(KERN_DEBUG "-----------------\n");
drivers/video/fbdev/sis/sis_main.c
5756
printk(KERN_DEBUG "CR%02x(%x) = 0x%02x\n", i, SISCR, reg);
drivers/video/fbdev/sis/sis_main.c
5760
printk(KERN_DEBUG "SR%02x(%x) = 0x%02x\n", i, SISSR, reg);
drivers/video/fbdev/sis/sis_main.c
5762
printk(KERN_DEBUG "-----------------\n");
drivers/video/fbdev/sis/sis_main.c
5799
printk(KERN_ERR
drivers/video/fbdev/sis/sis_main.c
5881
printk(KERN_DEBUG "sisfb: PCI device is disabled, "
drivers/video/fbdev/sis/sis_main.c
5883
printk(KERN_DEBUG "sisfb: I will not accept this "
drivers/video/fbdev/sis/sis_main.c
6019
printk(KERN_DEBUG "sisfb: Identified [%s %s] "
drivers/video/fbdev/sis/sis_main.c
6073
printk(KERN_INFO "sisfb: Video ROM %sfound\n",
drivers/video/fbdev/sis/sis_main.c
6084
printk(KERN_INFO "sisfb: Video ROM usage disabled\n");
drivers/video/fbdev/sis/sis_main.c
6130
printk(KERN_INFO "sisfb: Card is not "
drivers/video/fbdev/sis/sis_main.c
6134
printk(KERN_ERR "sisfb: Failed to POST card\n");
drivers/video/fbdev/sis/sis_main.c
6146
printk(KERN_INFO "sisfb: Fatal error: Unable to determine VRAM size.\n");
drivers/video/fbdev/sis/sis_main.c
6176
printk(KERN_ERR "sisfb: Fatal error: Unable to reserve %dMB framebuffer memory\n",
drivers/video/fbdev/sis/sis_main.c
6178
printk(KERN_ERR "sisfb: Is there another framebuffer driver active?\n");
drivers/video/fbdev/sis/sis_main.c
6184
printk(KERN_ERR "sisfb: Fatal error: Unable to reserve MMIO region\n");
drivers/video/fbdev/sis/sis_main.c
6192
printk(KERN_ERR "sisfb: Fatal error: Unable to map framebuffer memory\n");
drivers/video/fbdev/sis/sis_main.c
6199
printk(KERN_ERR "sisfb: Fatal error: Unable to map MMIO region\n");
drivers/video/fbdev/sis/sis_main.c
6213
printk(KERN_INFO "sisfb: Video RAM at 0x%lx, mapped to 0x%lx, size %ldk\n",
drivers/video/fbdev/sis/sis_main.c
6217
printk(KERN_INFO "sisfb: Viewport offset %ldk\n",
drivers/video/fbdev/sis/sis_main.c
6221
printk(KERN_INFO "sisfb: MMIO at 0x%lx, mapped to 0x%lx, size %ldk\n",
drivers/video/fbdev/sis/sis_main.c
6250
printk(KERN_WARNING "sisfb: Failed to initialize offscreen memory heap\n");
drivers/video/fbdev/sis/sis_main.c
6334
printk(KERN_ERR "Mode %dx%dx%d failed validation\n",
drivers/video/fbdev/sis/sis_main.c
6372
printk(KERN_INFO "sisfb: WARNING: Refresh rate "
drivers/video/fbdev/sis/sis_main.c
6383
printk(KERN_INFO "sisfb: Default mode is %dx%dx%d (%dHz)\n",
drivers/video/fbdev/sis/sis_main.c
6439
printk(KERN_DEBUG "sisfb: Initial vbflags 0x%x\n", (int)ivideo->vbflags);
drivers/video/fbdev/sis/sis_main.c
6444
printk(KERN_ERR "sisfb: Fatal error: Failed to register framebuffer\n");
drivers/video/fbdev/sis/sis_main.c
6456
printk(KERN_INFO "sisfb: 2D acceleration is %s, y-panning %s\n",
drivers/video/fbdev/sis/sis_main.c
6467
printk(KERN_INFO "sisfb: Copyright (C) 2001-2005 Thomas Winischhofer\n");
drivers/video/fbdev/sis/sis_main.c
6523
printk(KERN_INFO
drivers/video/fbdev/sis/sis_main.c
6671
printk(KERN_DEBUG "sisfb: Module unloaded\n");
drivers/video/fbdev/sis/sis_main.c
724
printk(KERN_INFO "sisfb: Unsupported rate %d for %dx%d\n",
drivers/video/fbdev/sstfb.c
1189
printk(KERN_ERR "sstfb: unknown dac type.\n");
drivers/video/fbdev/sstfb.c
1197
printk(KERN_INFO "sstfb: Using supplied graphic freq : %dMHz\n", gfxclk);
drivers/video/fbdev/sstfb.c
1200
printk(KERN_WARNING "sstfb: %dMhz is way out of spec! Using default\n", gfxclk);
drivers/video/fbdev/sstfb.c
1336
printk(KERN_ERR "cannot enable device\n");
drivers/video/fbdev/sstfb.c
1362
printk(KERN_ERR "sstfb: cannot reserve mmio memory\n");
drivers/video/fbdev/sstfb.c
1367
printk(KERN_ERR "sstfb: cannot reserve fb memory\n");
drivers/video/fbdev/sstfb.c
1374
printk(KERN_ERR "sstfb: cannot remap register area %#lx\n",
drivers/video/fbdev/sstfb.c
1380
printk(KERN_ERR "sstfb: cannot remap framebuffer %#lx\n",
drivers/video/fbdev/sstfb.c
1386
printk(KERN_ERR "sstfb: Init failed\n");
drivers/video/fbdev/sstfb.c
1392
printk(KERN_INFO "%s (revision %d) with %s dac\n",
drivers/video/fbdev/sstfb.c
1394
printk(KERN_INFO "framebuffer at %#lx, mapped to 0x%p, size %dMB\n",
drivers/video/fbdev/sstfb.c
1418
printk(KERN_ERR "sstfb: invalid video mode.\n");
drivers/video/fbdev/sstfb.c
1423
printk(KERN_ERR "sstfb: can't set default video mode.\n");
drivers/video/fbdev/sstfb.c
1428
printk(KERN_ERR "sstfb: can't alloc cmap memory.\n");
drivers/video/fbdev/sstfb.c
1435
printk(KERN_ERR "sstfb: can't register framebuffer.\n");
drivers/video/fbdev/sstfb.c
1443
printk(KERN_WARNING "sstfb: can't create sysfs entry.\n");
drivers/video/fbdev/sstfb.c
363
printk(KERN_ERR "sstfb: Pixclock at %ld KHZ out of range\n",
drivers/video/fbdev/sstfb.c
383
printk(KERN_ERR "sstfb: Unsupported bpp %d\n", var->bits_per_pixel);
drivers/video/fbdev/sstfb.c
399
printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
drivers/video/fbdev/sstfb.c
408
printk(KERN_ERR "sstfb: Unsupported timings\n");
drivers/video/fbdev/sstfb.c
416
printk(KERN_ERR "sstfb: Interlace/doublescan not supported %#x\n",
drivers/video/fbdev/sstfb.c
421
printk(KERN_ERR "sstfb: Unsupported resolution %dx%d\n",
drivers/video/fbdev/sstfb.c
429
printk(KERN_ERR "sstfb: Unsupported timings\n");
drivers/video/fbdev/sstfb.c
440
printk(KERN_ERR "sstfb: Not enough video memory\n");
drivers/video/fbdev/sstfb.c
836
printk(KERN_INFO "supplied memsize: %#x\n", *memsize);
drivers/video/fbdev/stifb.c
1222
printk(KERN_WARNING
drivers/video/fbdev/stifb.c
1236
printk(KERN_WARNING "stifb: '%s' (id: 0x%08x) not supported.\n",
drivers/video/fbdev/stifb.c
1302
printk(KERN_WARNING
drivers/video/fbdev/stifb.c
1309
printk(KERN_WARNING
drivers/video/fbdev/stifb.c
1364
printk(KERN_ERR "stifb: failed to map memory\n");
drivers/video/fbdev/stifb.c
1380
printk(KERN_ERR "stifb: cannot reserve fb region 0x%04lx-0x%04lx\n",
drivers/video/fbdev/stifb.c
1386
printk(KERN_ERR "stifb: cannot reserve sti mmio region 0x%04lx-0x%04lx\n",
drivers/video/fbdev/stifb.c
1441
printk(KERN_INFO "stifb: disabled by \"stifb=off\" kernel parameter\n");
drivers/video/fbdev/stifb.c
170
printk(KERN_DEBUG "%30s: WRITE_BYTE(0x%06x) = 0x%02x (old=0x%02x)\n", \
drivers/video/fbdev/stifb.c
174
printk(KERN_DEBUG "%30s: WRITE_WORD(0x%06x) = 0x%08x (old=0x%08x)\n", \
drivers/video/fbdev/sunxvr1000.c
106
printk(KERN_ERR "gfb: Cannot allocate color map.\n");
drivers/video/fbdev/sunxvr1000.c
151
printk("gfb: Found device at %pOF\n", dp);
drivers/video/fbdev/sunxvr1000.c
155
printk(KERN_ERR "gfb: Could not register framebuffer %pOF\n",
drivers/video/fbdev/sunxvr1000.c
37
printk(KERN_ERR "gfb: Critical properties missing for %pOF\n",
drivers/video/fbdev/sunxvr500.c
237
printk(KERN_ERR "e3d: Cannot allocate color map.\n");
drivers/video/fbdev/sunxvr500.c
260
printk(KERN_ERR "e3d: Cannot find OF node of %s\n",
drivers/video/fbdev/sunxvr500.c
267
printk(KERN_INFO "e3d: Ignoring secondary output device "
drivers/video/fbdev/sunxvr500.c
274
printk(KERN_ERR "e3d: Cannot enable PCI device %s\n",
drivers/video/fbdev/sunxvr500.c
302
printk("e3d: Cannot request region 1 for %s\n",
drivers/video/fbdev/sunxvr500.c
325
printk("e3d: Cannot request region 0 for %s\n",
drivers/video/fbdev/sunxvr500.c
365
printk("e3d: Found device at %s\n", pci_name(pdev));
drivers/video/fbdev/sunxvr500.c
369
printk(KERN_ERR "e3d: Could not register framebuffer %s\n",
drivers/video/fbdev/sunxvr500.c
63
printk(KERN_ERR "e3d: Critical properties missing for %s\n",
drivers/video/fbdev/tcx.c
462
printk(KERN_INFO "%pOF: TCX at %lx:%lx, %s\n",
drivers/video/fbdev/tdfxfb.c
1390
printk(KERN_ERR "tdfxfb: Can't enable pdev: %d\n", err);
drivers/video/fbdev/tdfxfb.c
1422
printk(KERN_ERR "tdfxfb: Can't reserve regbase\n");
drivers/video/fbdev/tdfxfb.c
1429
printk(KERN_ERR "fb: Can't remap %s register area.\n",
drivers/video/fbdev/tdfxfb.c
1437
printk(KERN_ERR "fb: Can't count %s memory.\n", info->fix.id);
drivers/video/fbdev/tdfxfb.c
1443
printk(KERN_ERR "tdfxfb: Can't reserve smem\n");
drivers/video/fbdev/tdfxfb.c
1450
printk(KERN_ERR "fb: Can't remap %s framebuffer.\n",
drivers/video/fbdev/tdfxfb.c
1459
printk(KERN_ERR "tdfxfb: Can't reserve iobase\n");
drivers/video/fbdev/tdfxfb.c
1463
printk(KERN_INFO "fb: %s memory = %dK\n", info->fix.id,
drivers/video/fbdev/tdfxfb.c
1538
printk(KERN_ERR "tdfxfb: Can't allocate color map\n");
drivers/video/fbdev/tdfxfb.c
1543
printk(KERN_ERR "tdfxfb: can't register framebuffer\n");
drivers/video/fbdev/tgafb.c
1428
printk(KERN_ERR "tgafb: Cannot enable PCI device\n");
drivers/video/fbdev/tgafb.c
1451
printk(KERN_ERR "tgafb: cannot reserve FB region\n");
drivers/video/fbdev/tgafb.c
1458
printk(KERN_ERR "tgafb: Cannot map MMIO\n");
drivers/video/fbdev/tgafb.c
1498
printk(KERN_ERR "tgafb: Could not find valid video mode\n");
drivers/video/fbdev/tgafb.c
1504
printk(KERN_ERR "tgafb: Could not allocate color map\n");
drivers/video/fbdev/tgafb.c
1512
printk(KERN_ERR "tgafb: Could not register framebuffer\n");
drivers/video/fbdev/tgafb.c
1590
printk(KERN_ERR
drivers/video/fbdev/valkyriefb.c
269
printk(KERN_INFO "Monitor sense value = 0x%x\n", p->sense);
drivers/video/fbdev/valkyriefb.c
295
printk(KERN_INFO "using video mode %d and color mode %d.\n",
drivers/video/fbdev/valkyriefb.c
331
printk(KERN_ERR "can't find address for valkyrie\n");
drivers/video/fbdev/valkyriefb.c
365
printk(KERN_ERR "valkyriefb: couldn't map resources\n");
drivers/video/fbdev/valkyriefb.c
377
printk(KERN_ERR "valkyriefb: can't set default video mode\n");
drivers/video/fbdev/valkyriefb.c
460
printk(KERN_ERR "valkyriefb: can't do %dx%dx%d.\n",
drivers/video/fbdev/valkyriefb.c
467
printk(KERN_ERR "valkyriefb: vmode %d not valid.\n", vmode);
drivers/video/fbdev/valkyriefb.c
472
printk(KERN_ERR "valkyriefb: cmode %d not valid.\n", cmode);
drivers/video/fbdev/valkyriefb.c
483
printk(KERN_ERR "valkyriefb: vmode %d does not support "
drivers/video/fbdev/valkyriefb.c
489
printk(KERN_ERR "valkyriefb: not enough ram for vmode %d, "
drivers/video/fbdev/vesafb.c
363
printk("%x ", pmi_base[i]);
drivers/video/fbdev/vesafb.c
364
printk("\n");
drivers/video/fbdev/via/accel.c
103
printk(KERN_WARNING "hw_bitblt_1: Unsupported width/height "
drivers/video/fbdev/via/accel.c
119
printk(KERN_WARNING "hw_bitblt_1: Unsupported source "
drivers/video/fbdev/via/accel.c
128
printk(KERN_WARNING "hw_bitblt_1: Unsupported destination "
drivers/video/fbdev/via/accel.c
140
printk(KERN_WARNING "hw_bitblt_1: Unsupported pitch %X %X\n",
drivers/video/fbdev/via/accel.c
181
printk(KERN_WARNING "hw_bitblt_2: Invalid operation: %d\n", op);
drivers/video/fbdev/via/accel.c
206
printk(KERN_WARNING "hw_bitblt_2: Invalid fill rop: "
drivers/video/fbdev/via/accel.c
221
printk(KERN_WARNING "hw_bitblt_2: Unsupported pitch %X %X\n",
drivers/video/fbdev/via/accel.c
229
printk(KERN_WARNING "hw_bitblt_2: Unsupported width/height "
drivers/video/fbdev/via/accel.c
237
printk(KERN_WARNING "hw_bitblt_2: Unsupported destination x/y "
drivers/video/fbdev/via/accel.c
245
printk(KERN_WARNING "hw_bitblt_2: Unsupported destination "
drivers/video/fbdev/via/accel.c
255
printk(KERN_WARNING "hw_bitblt_2: Unsupported source "
drivers/video/fbdev/via/accel.c
264
printk(KERN_WARNING "hw_bitblt_2: Unsupported source "
drivers/video/fbdev/via/accel.c
31
printk(KERN_WARNING "viafb_set_bpp: Unsupported bpp %d\n", bpp);
drivers/video/fbdev/via/accel.c
312
printk(KERN_WARNING "viafb_init_accel: ioremap failed, "
drivers/video/fbdev/via/accel.c
48
printk(KERN_WARNING "hw_bitblt_1: Invalid operation: %d\n", op);
drivers/video/fbdev/via/accel.c
532
printk(KERN_ERR "viafb_wait_engine_idle: not syncing\n");
drivers/video/fbdev/via/accel.c
73
printk(KERN_WARNING "hw_bitblt_1: Invalid fill rop: "
drivers/video/fbdev/via/accel.c
86
printk(KERN_WARNING "hw_bitblt_1: Unsupported source "
drivers/video/fbdev/via/accel.c
95
printk(KERN_WARNING "hw_bitblt_1: Unsupported destination x/y "
drivers/video/fbdev/via/debug.h
17
#define DEBUG_MSG(f, a...) printk(f, ## a)
drivers/video/fbdev/via/debug.h
24
#define WARN_MSG(f, a...) printk(f, ## a)
drivers/video/fbdev/via/hw.c
690
printk(KERN_WARNING "viafb: Unsupported source: %d\n", iga);
drivers/video/fbdev/via/hw.c
709
printk(KERN_WARNING "viafb: Unsupported source: %d\n", iga);
drivers/video/fbdev/via/hw.c
882
printk(KERN_WARNING "viafb: Unsupported polarity: %d\n",
drivers/video/fbdev/via/via-core.c
295
printk(KERN_ERR "VIA DMA timeout!\n");
drivers/video/fbdev/via/via-core.c
372
printk(KERN_ERR "cannot determine framebuffer size\n");
drivers/video/fbdev/via/via-gpio.c
232
printk(KERN_INFO "viafb: no GPIOs configured\n");
drivers/video/fbdev/via/via-gpio.c
251
printk(KERN_ERR "viafb: failed to add gpios (%d)\n", ret);
drivers/video/fbdev/via/via_aux_ch7301.c
27
printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr);
drivers/video/fbdev/via/via_aux_edid.c
42
printk(KERN_DEBUG "EDID: %s %s\n", spec->manufacturer, spec->monitor);
drivers/video/fbdev/via/via_aux_sii164.c
29
printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr);
drivers/video/fbdev/via/via_aux_vt1621.c
27
printk(KERN_INFO "viafb: Found %s\n", name);
drivers/video/fbdev/via/via_aux_vt1622.c
27
printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr);
drivers/video/fbdev/via/via_aux_vt1625.c
27
printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr);
drivers/video/fbdev/via/via_aux_vt1631.c
29
printk(KERN_INFO "viafb: Found %s\n", name);
drivers/video/fbdev/via/via_aux_vt1632.c
29
printk(KERN_INFO "viafb: Found %s at address 0x%x\n", name, addr);
drivers/video/fbdev/via/via_aux_vt1636.c
29
printk(KERN_INFO "viafb: Found %s\n", name);
drivers/video/fbdev/via/via_clock.c
260
printk(KERN_INFO "Using undocumented set clock state.\n%s", via_slap);
drivers/video/fbdev/via/via_clock.c
265
printk(KERN_INFO "Using undocumented set clock source.\n%s", via_slap);
drivers/video/fbdev/via/via_clock.c
270
printk(KERN_INFO "Using undocumented set PLL state.\n%s", via_slap);
drivers/video/fbdev/via/via_clock.c
275
printk(KERN_INFO "Using undocumented set PLL.\n%s", via_slap);
drivers/video/fbdev/via/via_i2c.c
102
printk(KERN_ERR "viafb_i2c: specify wrong i2c type.\n");
drivers/video/fbdev/via/via_i2c.c
239
printk(KERN_ERR "viafb: cannot create i2c bus %u:%d\n",
drivers/video/fbdev/via/via_i2c.c
44
printk(KERN_ERR "viafb_i2c: specify wrong i2c type.\n");
drivers/video/fbdev/via/via_modesetting.c
182
printk(KERN_WARNING "via_set_primary_color_depth: "
drivers/video/fbdev/via/via_modesetting.c
209
printk(KERN_WARNING "via_set_secondary_color_depth: "
drivers/video/fbdev/via/viafbdev.c
1698
printk(KERN_INFO "viafb: Probing I2C bus 0x26\n");
drivers/video/fbdev/via/viafbdev.c
1702
printk(KERN_INFO "viafb: Probing I2C bus 0x31\n");
drivers/video/fbdev/via/viafbdev.c
1707
printk(KERN_INFO "viafb: Probing I2C bus 0x2C\n");
drivers/video/fbdev/via/viafbdev.c
1711
printk(KERN_INFO "viafb: Finished I2C bus probing");
drivers/video/fbdev/via/viafbdev.c
2042
printk(KERN_INFO
drivers/video/fbdev/via/viafbdev.c
399
printk(KERN_WARNING "viafb_ioctl: Please avoid this interface as it is unstable and might change or vanish at any time!\n");
drivers/video/fbdev/via/viafbdev.c
794
printk(KERN_WARNING "viafb_cursor: The cursor is too large "
drivers/video/fbdev/vt8623fb.c
509
printk(KERN_ERR "vt8623fb: unsupported mode - bug\n");
drivers/video/fbdev/wmt_ge_rops.c
162
printk(KERN_INFO "Enabled support for WMT GE raster acceleration\n");
drivers/w1/masters/ds2490.c
1065
printk("%d: addr=%x, size=%d, dir=%s, type=%x\n",
drivers/w1/masters/ds2490.c
349
printk("%s: count=%d: ", __func__, count);
drivers/w1/masters/ds2490.c
351
printk("%02x ", buf[i]);
drivers/w1/masters/ds2490.c
352
printk("\n");
drivers/w1/masters/ds2490.c
438
printk("0x%x: count=%d, status: ", dev->ep[EP_STATUS], err);
drivers/w1/masters/ds2490.c
440
printk("%02x ", dev->st_buf[i]);
drivers/w1/masters/ds2490.c
441
printk("\n");
drivers/xen/events/events_2l.c
276
printk("\nvcpu %d\n ", cpu);
drivers/xen/events/events_2l.c
284
printk("%d: masked=%d pending=%d event_sel %0*"PRI_xen_ulong"\n ", i,
drivers/xen/events/events_2l.c
291
printk("\npending:\n ");
drivers/xen/events/events_2l.c
293
printk("%0*"PRI_xen_ulong"%s",
drivers/xen/events/events_2l.c
297
printk("\nglobal mask:\n ");
drivers/xen/events/events_2l.c
299
printk("%0*"PRI_xen_ulong"%s",
drivers/xen/events/events_2l.c
304
printk("\nglobally unmasked:\n ");
drivers/xen/events/events_2l.c
306
printk("%0*"PRI_xen_ulong"%s",
drivers/xen/events/events_2l.c
311
printk("\nlocal cpu%d mask:\n ", cpu);
drivers/xen/events/events_2l.c
313
printk("%0*"PRI_xen_ulong"%s", (int)(sizeof(cpu_evtchn[0])*2),
drivers/xen/events/events_2l.c
317
printk("\nlocally unmasked:\n ");
drivers/xen/events/events_2l.c
322
printk("%0*"PRI_xen_ulong"%s",
drivers/xen/events/events_2l.c
327
printk("\npending list:\n");
drivers/xen/events/events_2l.c
331
printk(" %d: event %d -> irq %u%s%s%s\n",
drivers/xen/events/events_base.c
1642
printk(KERN_WARNING "Sending nmi to CPU%d failed (rc:%d)\n", cpu, rc);
drivers/xen/events/events_base.c
1970
printk(KERN_DEBUG "xen: --> irq=%d, pirq=%d\n", irq, map_irq.pirq);
drivers/xen/grant-table.c
1674
printk("Grant table initialized\n");
drivers/xen/manage.c
123
printk(KERN_DEBUG "suspending xenstore...\n");
drivers/xen/privcmd.c
1631
printk(KERN_DEBUG "privcmd_fault: vma=%p %lx-%lx, pgoff=%lx, uv=%p\n",
drivers/xen/xenbus/xenbus_probe_frontend.c
318
printk("\n");
drivers/xen/xenbus/xenbus_probe_frontend.c
352
printk(KERN_DEBUG "XENBUS: backend %s %s\n",
drivers/xen/xenbus/xenbus_probe_frontend.c
375
printk(KERN_DEBUG "XENBUS: backend %s %s\n",
drivers/xen/xenbus/xenbus_probe_frontend.c
427
printk(KERN_DEBUG "XENBUS: frontend %s %s\n",
fs/adfs/map.c
103
printk(KERN_ERR "adfs: oversized fragment 0x%x at 0x%x-0x%x\n",
fs/adfs/map.c
151
printk(KERN_ERR "adfs: undersized free fragment\n");
fs/adfs/map.c
155
printk(KERN_ERR "adfs: oversized free fragment\n");
fs/adfs/super.c
35
printk(KERN_CRIT "ADFS-fs error (device %s)%s%s: %pV\n",
fs/adfs/super.c
50
printk("%sADFS-fs (%s): %pV\n", pfx, sb->s_id, &vaf);
fs/afs/cell.c
218
printk(KERN_ERR "kAFS: bad VL server IP address\n");
fs/afs/dir.c
1120
printk("kAFS: afs_d_revalidate: %pd2 has bad inode\n",
fs/afs/flock.c
306
printk(KERN_WARNING "AFS:"
fs/afs/internal.h
1842
printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__)
fs/afs/internal.h
1891
printk(KERN_ERR "\n"); \
fs/afs/internal.h
1892
printk(KERN_ERR "AFS: Assertion failed\n"); \
fs/afs/internal.h
1900
printk(KERN_ERR "\n"); \
fs/afs/internal.h
1901
printk(KERN_ERR "AFS: Assertion failed\n"); \
fs/afs/internal.h
1902
printk(KERN_ERR "%lu " #OP " %lu is false\n", \
fs/afs/internal.h
1904
printk(KERN_ERR "0x%lx " #OP " 0x%lx is false\n", \
fs/afs/internal.h
1913
printk(KERN_ERR "\n"); \
fs/afs/internal.h
1914
printk(KERN_ERR "AFS: Assertion failed\n"); \
fs/afs/internal.h
1915
printk(KERN_ERR "%lu "#OP1" %lu "#OP2" %lu is false\n", \
fs/afs/internal.h
1918
printk(KERN_ERR "0x%lx "#OP1" 0x%lx "#OP2" 0x%lx is false\n", \
fs/afs/internal.h
1928
printk(KERN_ERR "\n"); \
fs/afs/internal.h
1929
printk(KERN_ERR "AFS: Assertion failed\n"); \
fs/afs/internal.h
1937
printk(KERN_ERR "\n"); \
fs/afs/internal.h
1938
printk(KERN_ERR "AFS: Assertion failed\n"); \
fs/afs/internal.h
1939
printk(KERN_ERR "%lu " #OP " %lu is false\n", \
fs/afs/internal.h
1941
printk(KERN_ERR "0x%lx " #OP " 0x%lx is false\n", \
fs/afs/main.c
170
printk(KERN_INFO "kAFS: Red Hat AFS client v0.1 registering.\n");
fs/afs/main.c
211
printk(KERN_ERR "kAFS: failed to register: %d\n", ret);
fs/afs/main.c
225
printk(KERN_INFO "kAFS: Red Hat AFS client v0.1 unregistering.\n");
fs/afs/proc.c
147
printk("kAFS: Invalid Command on /proc/fs/afs/cells file\n");
fs/afs/proc.c
250
printk("busy\n");
fs/afs/super.c
112
printk(KERN_NOTICE "kAFS: Failed to allocate inode cache\n");
fs/afs/super.c
139
printk("kAFS: %d active inode objects still present\n",
fs/afs/super.c
236
printk(KERN_ERR "kAFS: no volume name specified\n");
fs/afs/super.c
246
printk(KERN_ERR "kAFS: unparsable volume name\n");
fs/afs/vl_list.c
350
printk(KERN_DEBUG "DNS: at %zu\n", (const void *)b - buffer);
fs/bfs/bfs.h
54
printk(KERN_ERR "BFS-fs: %s(): " format, __func__, ## args)
fs/binfmt_elf_fdpic.c
1653
printk(KERN_WARNING
fs/binfmt_elf_fdpic.c
397
printk(KERN_ERR "Unable to load interpreter\n");
fs/binfmt_elf_fdpic.c
46
#define kdebug(fmt, ...) printk("FDPIC "fmt"\n" ,##__VA_ARGS__ )
fs/binfmt_elf_fdpic.c
52
#define kdcore(fmt, ...) printk("FDPIC "fmt"\n" ,##__VA_ARGS__ )
fs/binfmt_elf_fdpic.c
924
printk("ELF FDPIC %s with invalid DYNAMIC section (inode=%llu)\n",
fs/btrfs/tests/btrfs-tests.c
78
printk(KERN_ERR "btrfs: cannot register test file system\n");
fs/btrfs/tests/btrfs-tests.c
84
printk(KERN_ERR "btrfs: cannot mount test file system\n");
fs/btrfs/tests/extent-io-tests.c
52
printk(KERN_ERR
fs/buffer.c
1019
printk(KERN_ERR "%s: requested out-of-range block %llu for device %pg\n",
fs/buffer.c
1036
printk(KERN_ERR "getblk(): block size %d not aligned to logical block size %d\n",
fs/buffer.c
275
printk("__find_get_block_slow() failed. block=%llu, "
fs/cachefiles/internal.h
456
printk(KERN_DEBUG "[%-6.6s] "FMT"\n", current->comm, ##__VA_ARGS__)
fs/cramfs/inode.c
128
printk(KERN_DEBUG "CRAMFS: Invalid file type 0%04o for inode %llu.\n",
fs/crypto/crypto.c
368
printk("%sfscrypt (%s, inode %llu): %pV\n",
fs/crypto/crypto.c
371
printk("%sfscrypt (%s): %pV\n", level, inode->i_sb->s_id, &vaf);
fs/crypto/crypto.c
373
printk("%sfscrypt: %pV\n", level, &vaf);
fs/dlm/config.c
943
printk(KERN_ERR "dlm: zero members_count\n");
fs/dlm/dlm_internal.h
59
printk(KERN_ERR "dlm: "fmt"\n" , ##args)
fs/dlm/dlm_internal.h
63
printk(KERN_ERR "dlm: %s: " fmt "\n", (ls)->ls_name , ##args)
fs/dlm/dlm_internal.h
68
printk(KERN_INFO "dlm: %s: " fmt "\n", \
fs/dlm/dlm_internal.h
71
printk(KERN_DEBUG "dlm: %s: " fmt "\n", \
fs/dlm/dlm_internal.h
78
printk(KERN_DEBUG "dlm: %s: " fmt "\n", \
fs/dlm/dlm_internal.h
93
printk(KERN_ERR "\nDLM: Assertion failed on line %d of file %s\n" \
fs/dlm/dlm_internal.h
98
printk("\n"); \
fs/dlm/lock.c
163
printk(KERN_ERR "lkb: nodeid %d id %x remid %x exflags %x flags %x "
fs/dlm/lock.c
1686
DLM_ASSERT(0, dlm_print_lkb(lkb); printk("sts=%d\n", status););
fs/dlm/lock.c
173
printk(KERN_ERR "rsb: nodeid %d master %d dir %d flags %lx first %x "
fs/dlm/lock.c
1755
printk("wait_count %d\n", lkb->lkb_wait_count););
fs/dlm/lock.c
186
printk(KERN_ERR "rsb: root_list empty %d recover_list empty %d\n",
fs/dlm/lock.c
188
printk(KERN_ERR "rsb lookup list\n");
fs/dlm/lock.c
191
printk(KERN_ERR "rsb grant queue:\n");
fs/dlm/lock.c
194
printk(KERN_ERR "rsb convert queue:\n");
fs/dlm/lock.c
197
printk(KERN_ERR "rsb wait queue:\n");
fs/dlm/lockspace.c
235
printk(KERN_WARNING "%s: can not create kset\n", __func__);
fs/dlm/main.c
61
printk("DLM installed\n");
fs/dlm/member.c
439
DLM_ASSERT(x < total, printk("total %d x %d\n", total, x););
fs/dlm/user.c
474
printk(KERN_DEBUG "dlm: process %s (%d) version mismatch "
fs/ecryptfs/crypto.c
1045
printk(KERN_ERR "Key is invalid; bailing out\n");
fs/ecryptfs/crypto.c
1050
printk(KERN_WARNING "%s: Encrypted flag not set\n",
fs/ecryptfs/crypto.c
1060
printk(KERN_ERR "%s: Out of memory\n", __func__);
fs/ecryptfs/crypto.c
1068
printk(KERN_ERR "%s: Error whilst writing headers; rc = [%d]\n",
fs/ecryptfs/crypto.c
1079
printk(KERN_ERR "%s: Error writing metadata out to lower file; "
fs/ecryptfs/crypto.c
1109
printk(KERN_WARNING "Invalid header size: [%zd]\n",
fs/ecryptfs/crypto.c
1228
printk(KERN_INFO "Error attempting to read the [%s] "
fs/ecryptfs/crypto.c
1301
printk(KERN_DEBUG "Valid eCryptfs headers not found in "
fs/ecryptfs/crypto.c
1311
printk(KERN_DEBUG "Valid eCryptfs headers not found in "
fs/ecryptfs/crypto.c
1320
printk(KERN_WARNING "Attempt to access file with "
fs/ecryptfs/crypto.c
1385
printk(KERN_ERR "%s: Error attempting to generate "
fs/ecryptfs/crypto.c
1395
printk(KERN_ERR "%s: No support for requested filename "
fs/ecryptfs/crypto.c
1435
printk(KERN_ERR "Requested key size is [%zd] bytes; maximum "
fs/ecryptfs/crypto.c
1446
printk(KERN_ERR "Unable to allocate crypto cipher with name "
fs/ecryptfs/crypto.c
1456
printk(KERN_ERR "Error attempting to set key of size [%zd] for "
fs/ecryptfs/crypto.c
1520
printk(KERN_ERR "Error attempting to initialize key TFM "
fs/ecryptfs/crypto.c
1586
printk(KERN_ERR "Error adding new key_tfm to list; "
fs/ecryptfs/crypto.c
310
printk(KERN_ERR "%s: Error attempting to crypt page with "
fs/ecryptfs/crypto.c
365
printk(KERN_ERR "%s: Error encrypting extent; "
fs/ecryptfs/crypto.c
439
printk(KERN_ERR "%s: Error decrypting extent; "
fs/ecryptfs/crypto.c
610
printk(KERN_ERR "Error adding keysig; rc = [%d]\n", rc);
fs/ecryptfs/crypto.c
677
printk(KERN_ERR "Error attempting to copy mount-wide key sigs "
fs/ecryptfs/crypto.c
977
printk(KERN_ERR "%s: Error attempting to write header "
fs/ecryptfs/file.c
237
printk(KERN_ERR "%s: Error attempting to initialize "
fs/ecryptfs/file.c
246
printk(KERN_WARNING "%s: Lower file is RO; eCryptfs "
fs/ecryptfs/file.c
297
printk(KERN_ERR "%s: Error attempting to initialize "
fs/ecryptfs/inode.c
159
printk(KERN_ERR "Error in vfs_unlink; rc = [%d]\n", rc);
fs/ecryptfs/inode.c
199
printk(KERN_ERR "%s: Failure to create dentry in lower fs; "
fs/ecryptfs/inode.c
246
printk(KERN_ERR "%s: Error attempting to initialize "
fs/ecryptfs/inode.c
254
printk(KERN_ERR "Error writing headers; rc = [%d]\n", rc);
fs/ecryptfs/inode.c
305
printk(KERN_ERR "%s: Error attempting to initialize "
fs/ecryptfs/inode.c
358
printk(KERN_ERR "%s: Error interposing; rc = [%ld]\n",
fs/ecryptfs/inode.c
406
printk(KERN_ERR "%s: Error attempting to encrypt and encode "
fs/ecryptfs/inode.c
906
printk(KERN_WARNING "Either the lower file "
fs/ecryptfs/keystore.c
1008
printk(KERN_ERR "%s: Error attempting to decrypt filename; "
fs/ecryptfs/keystore.c
1017
printk(KERN_WARNING "%s: Invalid tag 70 packet; could not "
fs/ecryptfs/keystore.c
1026
printk(KERN_WARNING "%s: Filename size is [%zd], which is "
fs/ecryptfs/keystore.c
1071
printk(KERN_ERR "Cannot get sig for auth_tok of type [%d]\n",
fs/ecryptfs/keystore.c
1099
printk(KERN_ERR "Unrecognized auth tok type: [%d]\n",
fs/ecryptfs/keystore.c
1125
printk(KERN_ERR "Failed to parse tag 65 packet; rc = [%d]\n",
fs/ecryptfs/keystore.c
1212
printk(KERN_ERR "Invalid max packet size; must be >=12\n");
fs/ecryptfs/keystore.c
1217
printk(KERN_ERR "Enter w/ first byte != 0x%.2x\n",
fs/ecryptfs/keystore.c
1228
printk(KERN_ERR "Unable to allocate memory\n");
fs/ecryptfs/keystore.c
1236
printk(KERN_WARNING "Error parsing packet length; "
fs/ecryptfs/keystore.c
1241
printk(KERN_WARNING "Invalid body size ([%td])\n", body_size);
fs/ecryptfs/keystore.c
1247
printk(KERN_WARNING "Packet size exceeds max\n");
fs/ecryptfs/keystore.c
1252
printk(KERN_WARNING "Unknown version number [%d]\n",
fs/ecryptfs/keystore.c
1267
printk(KERN_WARNING "Tag 1 packet contains key larger "
fs/ecryptfs/keystore.c
1347
printk(KERN_ERR "Max packet size too large\n");
fs/ecryptfs/keystore.c
1352
printk(KERN_ERR "First byte != 0x%.2x; invalid packet\n",
fs/ecryptfs/keystore.c
1362
printk(KERN_ERR "Unable to allocate memory\n");
fs/ecryptfs/keystore.c
1370
printk(KERN_WARNING "Error parsing packet length; rc = [%d]\n",
fs/ecryptfs/keystore.c
1375
printk(KERN_WARNING "Invalid body size ([%td])\n", body_size);
fs/ecryptfs/keystore.c
1381
printk(KERN_ERR "Packet size exceeds max\n");
fs/ecryptfs/keystore.c
1389
printk(KERN_WARNING "Tag 3 packet contains key larger "
fs/ecryptfs/keystore.c
1395
printk(KERN_WARNING "Unknown version number [%d]\n",
fs/ecryptfs/keystore.c
1419
printk(KERN_WARNING "Only S2K ID 3 is currently supported\n");
fs/ecryptfs/keystore.c
1518
printk(KERN_ERR "Maximum packet size too small\n");
fs/ecryptfs/keystore.c
1523
printk(KERN_WARNING "Invalid tag 11 packet format\n");
fs/ecryptfs/keystore.c
1530
printk(KERN_WARNING "Invalid tag 11 packet format\n");
fs/ecryptfs/keystore.c
1534
printk(KERN_WARNING "Invalid body size ([%td])\n", body_size);
fs/ecryptfs/keystore.c
1541
printk(KERN_ERR "Packet size exceeds max\n");
fs/ecryptfs/keystore.c
1546
printk(KERN_ERR "Literal data section in tag 11 packet exceeds "
fs/ecryptfs/keystore.c
1552
printk(KERN_WARNING "Unrecognizable packet\n");
fs/ecryptfs/keystore.c
1557
printk(KERN_WARNING "Unrecognizable packet\n");
fs/ecryptfs/keystore.c
1582
printk(KERN_ERR "Could not find key with description: [%s]\n",
fs/ecryptfs/keystore.c
1630
printk(KERN_ERR "Internal error whilst attempting to get "
fs/ecryptfs/keystore.c
1639
printk(KERN_ERR "Internal error whilst attempting to convert "
fs/ecryptfs/keystore.c
1652
printk(KERN_ERR "Internal error whilst attempting to convert "
fs/ecryptfs/keystore.c
1661
printk(KERN_ERR "%s: Out of kernel memory whilst attempting to "
fs/ecryptfs/keystore.c
1675
printk(KERN_ERR "Error setting key for crypto context\n");
fs/ecryptfs/keystore.c
1685
printk(KERN_ERR "Error decrypting; rc = [%d]\n", rc);
fs/ecryptfs/keystore.c
1811
printk(KERN_ERR "The lower file appears to be a non-encrypted "
fs/ecryptfs/keystore.c
1834
printk(KERN_ERR
fs/ecryptfs/keystore.c
2005
printk(KERN_ERR "Failed to encrypt session key via a key "
fs/ecryptfs/keystore.c
2023
printk(KERN_ERR "Packet length larger than maximum allowable; "
fs/ecryptfs/keystore.c
2083
printk(KERN_ERR "Packet length larger than maximum allowable; "
fs/ecryptfs/keystore.c
2094
printk(KERN_ERR "Error generating tag 11 packet header; cannot "
fs/ecryptfs/keystore.c
2154
printk(KERN_ERR "Internal error whilst attempting to get "
fs/ecryptfs/keystore.c
2160
printk(KERN_WARNING "No key size specified at mount; "
fs/ecryptfs/keystore.c
2265
printk(KERN_ERR "Error encrypting; rc = [%d]\n", rc);
fs/ecryptfs/keystore.c
2288
printk(KERN_ERR "Packet too large; need up to [%td] bytes, but "
fs/ecryptfs/keystore.c
2301
printk(KERN_ERR "Error generating tag 3 packet header; cannot "
fs/ecryptfs/keystore.c
2383
printk(KERN_WARNING "Unable to retrieve auth tok with "
fs/ecryptfs/keystore.c
368
printk(KERN_ERR "%s: message_len is [%zd]; minimum acceptable "
fs/ecryptfs/keystore.c
374
printk(KERN_ERR "%s: Type should be ECRYPTFS_TAG_67\n",
fs/ecryptfs/keystore.c
380
printk(KERN_ERR "%s: Status indicator has non zero "
fs/ecryptfs/keystore.c
395
printk(KERN_ERR "%s: message_len [%zd]; max len is [%zd]\n",
fs/ecryptfs/keystore.c
401
printk(KERN_ERR "%s: Encrypted key_size [%zd] larger than "
fs/ecryptfs/keystore.c
466
printk(KERN_ERR "Data structure version mismatch. Userspace "
fs/ecryptfs/keystore.c
475
printk(KERN_ERR "Invalid auth_tok structure "
fs/ecryptfs/keystore.c
529
printk(KERN_WARNING "Invalidating auth tok with sig = [%s]\n", sig);
fs/ecryptfs/keystore.c
636
printk(KERN_ERR "%s: Error attempting to find auth tok for "
fs/ecryptfs/keystore.c
645
printk(KERN_ERR "Internal error whilst attempting to get "
fs/ecryptfs/keystore.c
678
printk(KERN_WARNING "%s: Require [%zd] bytes to write; only "
fs/ecryptfs/keystore.c
687
printk(KERN_ERR "%s: Out of kernel memory whilst attempting to "
fs/ecryptfs/keystore.c
710
printk(KERN_ERR "%s: Error generating tag 70 packet "
fs/ecryptfs/keystore.c
724
printk(KERN_WARNING "%s: Unable to generate code for "
fs/ecryptfs/keystore.c
736
printk(KERN_INFO "%s: Filename encryption only supports "
fs/ecryptfs/keystore.c
757
printk(KERN_ERR "%s: Internal error whilst attempting to "
fs/ecryptfs/keystore.c
766
printk(KERN_ERR "%s: Internal error whilst attempting to "
fs/ecryptfs/keystore.c
781
printk(KERN_ERR "%s: Error setting key for crypto context; "
fs/ecryptfs/keystore.c
794
printk(KERN_ERR "%s: Error attempting to encrypt filename; "
fs/ecryptfs/keystore.c
868
printk(KERN_WARNING "%s: max_packet_size is [%zd]; it must be "
fs/ecryptfs/keystore.c
883
printk(KERN_WARNING "%s: Invalid packet tag [0x%.2x]; must be "
fs/ecryptfs/keystore.c
893
printk(KERN_WARNING "%s: Error parsing packet length; "
fs/ecryptfs/keystore.c
901
printk(KERN_WARNING "%s: max_packet_size is [%zd]; real packet "
fs/ecryptfs/keystore.c
917
printk(KERN_WARNING "%s: Cipher code [%d] is invalid\n",
fs/ecryptfs/keystore.c
925
printk(KERN_ERR "%s: Error attempting to find auth tok for "
fs/ecryptfs/keystore.c
934
printk(KERN_ERR "Internal error whilst attempting to get "
fs/ecryptfs/keystore.c
943
printk(KERN_ERR "%s: Internal error whilst attempting to "
fs/ecryptfs/keystore.c
959
printk(KERN_ERR "%s: Internal error whilst attempting to "
fs/ecryptfs/keystore.c
968
printk(KERN_ERR "%s: Out of kernel memory whilst attempting to "
fs/ecryptfs/keystore.c
986
printk(KERN_INFO "%s: Filename encryption only supports "
fs/ecryptfs/keystore.c
995
printk(KERN_ERR "%s: Error setting key for crypto context; "
fs/ecryptfs/kthread.c
146
printk(KERN_ERR "%s: We are in the middle of shutting down; "
fs/ecryptfs/kthread.c
83
printk(KERN_ERR "%s: Failed to create kernel thread; rc = [%d]"
fs/ecryptfs/main.c
116
printk(KERN_ERR "Error opening lower file "
fs/ecryptfs/main.c
198
printk(KERN_ERR "Could not find valid key in user "
fs/ecryptfs/main.c
265
printk(KERN_ERR "Error attempting to register "
fs/ecryptfs/main.c
301
printk(KERN_ERR "Error attempting to register "
fs/ecryptfs/main.c
390
printk(KERN_ERR "Error attempting to initialize "
fs/ecryptfs/main.c
408
printk(KERN_ERR "Error attempting to initialize "
fs/ecryptfs/main.c
422
printk(KERN_WARNING "One or more global auth toks could not "
fs/ecryptfs/main.c
491
printk(KERN_ERR "Mount on filesystem of type "
fs/ecryptfs/main.c
499
printk(KERN_ERR "Mounting on idmapped mounts currently disallowed\n");
fs/ecryptfs/main.c
506
printk(KERN_ERR "Mount of device (uid: %d) not owned by "
fs/ecryptfs/main.c
568
printk(KERN_ERR "%s; rc = [%d]\n", err, rc);
fs/ecryptfs/main.c
785
printk(KERN_ERR "Unable to create ecryptfs kset\n");
fs/ecryptfs/main.c
791
printk(KERN_ERR
fs/ecryptfs/main.c
822
printk(KERN_ERR
fs/ecryptfs/main.c
828
printk(KERN_ERR "sysfs registration failed\n");
fs/ecryptfs/main.c
833
printk(KERN_ERR "%s: kthread initialization failed; "
fs/ecryptfs/main.c
839
printk(KERN_ERR "Failure occurred while attempting to "
fs/ecryptfs/main.c
846
printk(KERN_ERR "Failure whilst attempting to init crypto; "
fs/ecryptfs/main.c
852
printk(KERN_ERR "Failed to register filesystem\n");
fs/ecryptfs/main.c
856
printk(KERN_CRIT "eCryptfs verbosity set to %d. Secret values "
fs/ecryptfs/main.c
880
printk(KERN_ERR "Failure whilst attempting to destroy crypto; "
fs/ecryptfs/messaging.c
173
printk(KERN_WARNING "%s: Warning: dropping message that is in "
fs/ecryptfs/messaging.c
216
printk(KERN_ERR "%s: Attempt to reference "
fs/ecryptfs/messaging.c
226
printk(KERN_WARNING "%s: Desired context element is not "
fs/ecryptfs/messaging.c
231
printk(KERN_WARNING "%s: Invalid message sequence; "
fs/ecryptfs/messaging.c
278
printk(KERN_WARNING "%s: Could not claim a free "
fs/ecryptfs/messaging.c
288
printk(KERN_ERR "%s: Error attempting to send message to "
fs/ecryptfs/messaging.c
361
printk(KERN_WARNING "%s: Specified number of users is "
fs/ecryptfs/messaging.c
440
printk(KERN_ERR "%s: Error whilst "
fs/ecryptfs/messaging.c
45
printk(KERN_WARNING "%s: The eCryptfs free "
fs/ecryptfs/miscdev.c
123
printk(KERN_CRIT "%s: Fatal error whilst attempting to "
fs/ecryptfs/miscdev.c
227
printk(KERN_WARNING "%s: Attempt to read from zombified "
fs/ecryptfs/miscdev.c
268
printk(KERN_WARNING "%s: Error writing packet length; "
fs/ecryptfs/miscdev.c
280
printk(KERN_WARNING "%s: Only given user buffer of "
fs/ecryptfs/miscdev.c
332
printk(KERN_WARNING "%s: (sizeof(*msg) + msg->data_len) = "
fs/ecryptfs/miscdev.c
340
printk(KERN_ERR
fs/ecryptfs/miscdev.c
37
printk(KERN_WARNING "%s: Attempt to poll on zombified "
fs/ecryptfs/miscdev.c
372
printk(KERN_WARNING "%s: Acceptable packet size range is "
fs/ecryptfs/miscdev.c
380
printk(KERN_WARNING "%s: Error while inspecting packet size\n",
fs/ecryptfs/miscdev.c
388
printk(KERN_WARNING "%s: Error parsing packet length; "
fs/ecryptfs/miscdev.c
395
printk(KERN_WARNING "%s: Invalid packet size [%zu]\n", __func__,
fs/ecryptfs/miscdev.c
403
printk(KERN_ERR "%s: memdup_user returned error [%ld]\n",
fs/ecryptfs/miscdev.c
411
printk(KERN_WARNING "%s: Minimum acceptable packet "
fs/ecryptfs/miscdev.c
426
printk(KERN_WARNING "%s: Failed to deliver miscdev "
fs/ecryptfs/miscdev.c
482
printk(KERN_ERR "%s: Failed to register miscellaneous device "
fs/ecryptfs/miscdev.c
78
printk(KERN_ERR "%s: Error attempting to spawn daemon; "
fs/ecryptfs/mmap.c
126
printk(KERN_ERR "%s: Error reading xattr "
fs/ecryptfs/mmap.c
141
printk(KERN_ERR "%s: Error attempting to read "
fs/ecryptfs/mmap.c
178
printk(KERN_ERR "%s: Error attempting to copy "
fs/ecryptfs/mmap.c
191
printk(KERN_ERR "Error reading page; err = "
fs/ecryptfs/mmap.c
267
printk(KERN_ERR "%s: Error attempting to read "
fs/ecryptfs/mmap.c
279
printk(KERN_ERR "%s: Error attempting "
fs/ecryptfs/mmap.c
294
printk(KERN_ERR "%s: Error reading "
fs/ecryptfs/mmap.c
310
printk(KERN_ERR "%s: Error decrypting "
fs/ecryptfs/mmap.c
328
printk(KERN_ERR "%s: Error on attempt to "
fs/ecryptfs/mmap.c
371
printk(KERN_ERR "%s: Error writing file size to header; "
fs/ecryptfs/mmap.c
391
printk(KERN_WARNING
fs/ecryptfs/mmap.c
411
printk(KERN_ERR "Error whilst attempting to write inode size "
fs/ecryptfs/mmap.c
493
printk(KERN_ERR "Error writing inode size to metadata; "
fs/ecryptfs/read_write.c
136
printk(KERN_ERR "%s: Error getting page at "
fs/ecryptfs/read_write.c
179
printk(KERN_ERR "%s: Error encrypting "
fs/ecryptfs/read_write.c
193
printk(KERN_ERR "Problem with "
fs/efivarfs/vars.c
359
printk(KERN_WARNING "efivars: duplicate variable: %s-%pUl\n",
fs/efivarfs/vars.c
386
printk(KERN_ERR "efivars: Memory allocation failed.\n");
fs/erofs/super.c
34
printk("%c%cerofs (device %s): %pV",
fs/erofs/super.c
37
printk("%c%cerofs: %pV", KERN_SOH_ASCII, level, &vaf);
fs/ext2/balloc.c
1469
printk ("group %d: stored = %d, counted = %lu\n",
fs/ext2/balloc.c
1474
printk("ext2_count_free_blocks: stored = %lu, computed = %lu, %lu\n",
fs/ext2/balloc.c
217
printk("Block Allocation Reservation Windows Map (%s):\n", fn);
fs/ext2/balloc.c
221
printk("reservation window 0x%p "
fs/ext2/balloc.c
225
printk("Bad reservation %p (start >= end)\n",
fs/ext2/balloc.c
230
printk("Bad reservation %p (prev->end >= start)\n",
fs/ext2/balloc.c
236
printk("Restarting reservation walk in verbose mode\n");
fs/ext2/balloc.c
244
printk("Window map complete.\n");
fs/ext2/dir.c
680
printk("kaddr=%p, de=%p\n", kaddr, de);
fs/ext2/ext2.h
148
printk ("EXT2-fs DEBUG (%s, %d): %s:", \
fs/ext2/ext2.h
150
printk (f, ## a); \
fs/ext2/ialloc.c
638
printk("group %d: stored = %d, counted = %u\n",
fs/ext2/ialloc.c
643
printk("ext2_count_free_inodes: stored = %lu, computed = %lu, %lu\n",
fs/ext2/inode.c
1566
printk ("IO error syncing ext2 inode [%s:%08lx]\n",
fs/ext2/super.c
105
printk("%sEXT2-fs (%s): %pV\n", prefix, s_id, &vaf);
fs/ext2/super.c
121
printk("%sEXT2-fs (%s): %pV\n", prefix, sb->s_id, &vaf);
fs/ext2/super.c
69
printk(KERN_CRIT "EXT2-fs (%s): error: %s: %pV\n",
fs/ext2/xattr.c
76
printk(KERN_DEBUG "inode %s:%llu: ", \
fs/ext2/xattr.c
78
printk(f); \
fs/ext2/xattr.c
79
printk("\n"); \
fs/ext2/xattr.c
82
printk(KERN_DEBUG "block %pg:%lu: ", \
fs/ext2/xattr.c
84
printk(f); \
fs/ext2/xattr.c
85
printk("\n"); \
fs/ext4/balloc.c
806
printk(KERN_DEBUG "group %u: stored = %d, counted = %u\n",
fs/ext4/balloc.c
811
printk(KERN_DEBUG "ext4_count_free_clusters: stored = %llu"
fs/ext4/block_validity.c
132
printk(KERN_INFO "System zones: ");
fs/ext4/block_validity.c
138
printk(KERN_CONT "%s%llu-%llu", first ? "" : ", ",
fs/ext4/block_validity.c
144
printk(KERN_CONT "\n");
fs/ext4/ext4.h
105
printk(KERN_EMERG \
fs/ext4/ext4.h
76
printk(KERN_DEBUG "EXT4-fs DEBUG (%s, %d): %s:", \
fs/ext4/ext4.h
78
printk(KERN_DEBUG f, ## a); \
fs/ext4/ext4_jbd2.c
203
printk(KERN_ERR "EXT4-fs: %s:%d: aborting transaction: %s in %s\n",
fs/ext4/extents.c
3104
printk(KERN_INFO "EXT4-fs: file extents enabled"
fs/ext4/extents.c
3135
printk(KERN_ERR "EXT4-fs: %lu blocks in %lu extents (%lu ave)\n",
fs/ext4/extents.c
3138
printk(KERN_ERR "EXT4-fs: extents: %lu min, %lu max, max depth %lu\n",
fs/ext4/extents.c
790
printk(KERN_DEBUG "k=%d, ix=0x%p, "
fs/ext4/extents.c
793
printk(KERN_DEBUG "%u <= %u\n",
fs/ext4/extents_status.c
2001
printk(KERN_DEBUG "pending reservations for inode %llu:", inode->i_ino);
fs/ext4/extents_status.c
2006
printk(KERN_DEBUG " %u", pr->lclu);
fs/ext4/extents_status.c
2009
printk(KERN_DEBUG "\n");
fs/ext4/extents_status.c
217
printk(KERN_DEBUG "status extents for inode %llu:", inode->i_ino);
fs/ext4/extents_status.c
223
printk(KERN_DEBUG " [%u/%u) %llu %x",
fs/ext4/extents_status.c
228
printk(KERN_DEBUG "\n");
fs/ext4/extents_status.h
19
#define es_debug(fmt, ...) printk(fmt, ##__VA_ARGS__)
fs/ext4/ialloc.c
1427
printk(KERN_ERR "ext4_test_bit(bit=%d, block=%llu) = %d\n",
fs/ext4/ialloc.c
1431
printk(KERN_ERR "is_bad_inode(inode)=%d\n",
fs/ext4/ialloc.c
1433
printk(KERN_ERR "NEXT_ORPHAN(inode)=%u\n",
fs/ext4/ialloc.c
1435
printk(KERN_ERR "max_ino=%lu\n", max_ino);
fs/ext4/ialloc.c
1436
printk(KERN_ERR "i_nlink=%u\n", inode->i_nlink);
fs/ext4/ialloc.c
1474
printk(KERN_DEBUG "group %lu: stored = %d, counted = %lu\n",
fs/ext4/ialloc.c
1479
printk(KERN_DEBUG "ext4_count_free_inodes: "
fs/ext4/ialloc.c
253
printk(KERN_ERR "EXT4-fs: %s:%d: inode on "
fs/ext4/inode.c
493
printk("ES cache assertion failed for inode: %llu "
fs/ext4/mballoc.c
3634
printk(KERN_EMERG
fs/ext4/mballoc.c
678
printk(KERN_EMERG \
fs/ext4/namei.c
1049
dxtrace(printk(KERN_INFO "In htree dirblock_to_tree: block %lu\n",
fs/ext4/namei.c
1164
dxtrace(printk(KERN_DEBUG "In htree_fill_tree, start hash: %x:%x\n",
fs/ext4/namei.c
1254
dxtrace(printk(KERN_DEBUG "Fill tree: returned %d entries, "
fs/ext4/namei.c
1568
dxtrace(printk(KERN_DEBUG "ext4_find_entry: dx failed, "
fs/ext4/namei.c
1572
dxtrace(printk(KERN_DEBUG "ext4_find_entry: casefold "
fs/ext4/namei.c
1754
dxtrace(printk(KERN_DEBUG "%s not found\n", fname->usr_fname->name));
fs/ext4/namei.c
1986
dxtrace(printk(KERN_INFO "Split block %lu at %x, %i/%i\n",
fs/ext4/namei.c
2230
dxtrace(printk(KERN_DEBUG "Creating index: inode %llu\n", dir->i_ino));
fs/ext4/namei.c
2509
dxtrace(printk(KERN_DEBUG "using %u of %u node entries\n",
fs/ext4/namei.c
2565
dxtrace(printk(KERN_DEBUG "Split index %i/%i\n",
fs/ext4/namei.c
2618
dxtrace(printk(KERN_DEBUG
fs/ext4/namei.c
605
printk(KERN_DEBUG "%s index", label);
fs/ext4/namei.c
607
printk(KERN_CONT " %x->%lu",
fs/ext4/namei.c
611
printk(KERN_CONT "\n");
fs/ext4/namei.c
630
printk("names: ");
fs/ext4/namei.c
650
printk("%.*s:(U)%x.%u ", len,
fs/ext4/namei.c
662
printk(KERN_WARNING "Error "
fs/ext4/namei.c
670
printk(KERN_WARNING "Error "
fs/ext4/namei.c
686
printk("%.*s:(E)%x.%u ", len, name,
fs/ext4/namei.c
697
printk("%.*s:%x.%u ", len, name, h.hash,
fs/ext4/namei.c
706
printk(KERN_CONT "(%i)\n", names);
fs/ext4/namei.c
717
printk("%i indexed blocks...\n", count);
fs/ext4/namei.c
724
printk("%s%3u:%03u hash %8x/%8x ",levels?"":" ", i, block, hash, range);
fs/ext4/namei.c
738
printk(KERN_DEBUG "%snames %u, fullness %u (%u%%)\n",
fs/ext4/namei.c
752
dxtrace(printk(KERN_CONT ","));
fs/ext4/namei.c
865
dxtrace(printk("Look up %x", hash));
fs/ext4/namei.c
881
dxtrace(printk(KERN_CONT "."));
fs/ext4/namei.c
891
dxtrace(printk(KERN_CONT " %x->%u\n",
fs/ext4/resize.c
148
printk(KERN_DEBUG "EXT4-fs: adding %s group %u: %u blocks "
fs/ext4/resize.c
1526
printk(KERN_DEBUG "EXT4-fs: added group %u:"
fs/ext4/resize.c
1816
printk(KERN_DEBUG "EXT4-fs: extended group to %llu "
fs/ext4/resize.c
405
printk(KERN_DEBUG "EXT4-fs: adding a flex group with "
fs/ext4/resize.c
835
printk(KERN_DEBUG
fs/ext4/super.c
1001
printk("%sEXT4-fs (%s): %pV\n", prefix, sb->s_id, &vaf);
fs/ext4/super.c
1003
printk("%sEXT4-fs: %pV\n", prefix, &vaf);
fs/ext4/super.c
1026
printk(KERN_WARNING "EXT4-fs warning (device %s): %s:%d: %pV\n",
fs/ext4/super.c
1043
printk(KERN_WARNING "EXT4-fs warning (device %s): %s:%d: "
fs/ext4/super.c
1067
printk(KERN_CRIT "EXT4-fs error (device %s): %s:%d: group %u, ",
fs/ext4/super.c
1070
printk(KERN_CONT "inode %llu: ", ino);
fs/ext4/super.c
1072
printk(KERN_CONT "block %llu:",
fs/ext4/super.c
1074
printk(KERN_CONT "%pV\n", &vaf);
fs/ext4/super.c
1175
printk(KERN_ERR "sb_info orphan list:\n");
fs/ext4/super.c
1178
printk(KERN_ERR " "
fs/ext4/super.c
3155
printk(KERN_INFO "[EXT4 FS bs=%lu, gc=%u, "
fs/ext4/super.c
3700
printk(KERN_NOTICE "EXT4-fs (%s): initial error at time %llu: %.*s:%d",
fs/ext4/super.c
3707
printk(KERN_CONT ": inode %u",
fs/ext4/super.c
3710
printk(KERN_CONT ": block %llu", (unsigned long long)
fs/ext4/super.c
3712
printk(KERN_CONT "\n");
fs/ext4/super.c
3715
printk(KERN_NOTICE "EXT4-fs (%s): last error at time %llu: %.*s:%d",
fs/ext4/super.c
3722
printk(KERN_CONT ": inode %u",
fs/ext4/super.c
3725
printk(KERN_CONT ": block %llu", (unsigned long long)
fs/ext4/super.c
3727
printk(KERN_CONT "\n");
fs/ext4/super.c
3961
printk(KERN_CRIT "EXT4-fs: error %d creating inode table "
fs/ext4/super.c
5590
printk(KERN_ERR "EXT4-fs: failed to create workqueue\n");
fs/ext4/super.c
7443
printk(KERN_WARNING
fs/ext4/super.c
7472
printk(KERN_WARNING
fs/ext4/super.c
829
printk(KERN_CRIT
fs/ext4/super.c
856
printk(KERN_CRIT "EXT4-fs error (device %s): %s:%d: "
fs/ext4/super.c
861
printk(KERN_CRIT "EXT4-fs error (device %s): %s:%d: "
fs/ext4/super.c
896
printk(KERN_CRIT
fs/ext4/super.c
902
printk(KERN_CRIT
fs/ext4/super.c
975
printk(KERN_CRIT "EXT4-fs error (device %s) in %s:%d: %s\n",
fs/ext4/xattr.c
67
printk(KERN_DEBUG "inode %s:%llu: " fmt "\n", \
fs/ext4/xattr.c
70
printk(KERN_DEBUG "block %pg:%lu: " fmt "\n", \
fs/f2fs/super.c
458
printk("%c%cF2FS-fs (%s): %pV\n",
fs/f2fs/super.c
461
printk("%c%cF2FS-fs: %pV\n",
fs/fat/inode.c
1310
printk(KERN_INFO "FAT-fs: \"%s\" option is obsolete, "
fs/fcntl.c
1131
printk(KERN_ERR "kill_fasync: bad magic number in "
fs/freevxfs/vxfs_bmap.c
152
printk(KERN_INFO "\n\nTYPED_DEV4 detected!\n");
fs/freevxfs/vxfs_bmap.c
153
printk(KERN_INFO "block: %llu\tsize: %lld\tdev: %d\n",
fs/freevxfs/vxfs_bmap.c
160
printk(KERN_ERR "%s:%d vt_hdr %llu\n", __func__,
fs/freevxfs/vxfs_bmap.c
22
printk(KERN_DEBUG "type=%Lu ", typ->vt_hdr >> VXFS_TYPED_TYPESHIFT);
fs/freevxfs/vxfs_bmap.c
222
printk(KERN_INFO "\n\nTYPED_DEV4 detected!\n");
fs/freevxfs/vxfs_bmap.c
223
printk(KERN_INFO "block: %llu\tsize: %lld\tdev: %d\n",
fs/freevxfs/vxfs_bmap.c
23
printk("offset=%Lx ", typ->vt_hdr & VXFS_TYPED_OFFSETMASK);
fs/freevxfs/vxfs_bmap.c
24
printk("block=%x ", typ->vt_block);
fs/freevxfs/vxfs_bmap.c
25
printk("size=%x\n", typ->vt_size);
fs/freevxfs/vxfs_bmap.c
264
printk(KERN_WARNING "vxfs: inode %llu has no valid orgtype (%x)\n",
fs/freevxfs/vxfs_bmap.c
269
printk(KERN_WARNING "vxfs: inode %llu has an unsupported orgtype (%x)\n",
fs/freevxfs/vxfs_bmap.c
79
printk(KERN_WARNING "no matching indir?");
fs/freevxfs/vxfs_bmap.c
84
printk("vxfs: indirect extent too big!\n");
fs/freevxfs/vxfs_fshead.c
104
printk("vxfs: fsh inode dump:\n");
fs/freevxfs/vxfs_fshead.c
110
printk(KERN_ERR "vxfs: unable to get structural fsh\n");
fs/freevxfs/vxfs_fshead.c
120
printk(KERN_ERR "vxfs: unable to get primary fsh\n");
fs/freevxfs/vxfs_fshead.c
131
printk(KERN_ERR "vxfs: unable to get structural list inode\n");
fs/freevxfs/vxfs_fshead.c
135
printk(KERN_ERR "vxfs: structural list inode is of wrong type (%x)\n",
fs/freevxfs/vxfs_fshead.c
142
printk(KERN_ERR "vxfs: unable to get inode list inode\n");
fs/freevxfs/vxfs_fshead.c
146
printk(KERN_ERR "vxfs: inode list inode is of wrong type (%x)\n",
fs/freevxfs/vxfs_fshead.c
26
printk("\n\ndumping fileset header:\n");
fs/freevxfs/vxfs_fshead.c
27
printk("----------------------------\n");
fs/freevxfs/vxfs_fshead.c
28
printk("version: %u\n", fhp->fsh_version);
fs/freevxfs/vxfs_fshead.c
29
printk("fsindex: %u\n", fhp->fsh_fsindex);
fs/freevxfs/vxfs_fshead.c
30
printk("iauino: %u\tninodes:%u\n",
fs/freevxfs/vxfs_fshead.c
32
printk("maxinode: %u\tlctino: %u\n",
fs/freevxfs/vxfs_fshead.c
34
printk("nau: %u\n", fhp->fsh_nau);
fs/freevxfs/vxfs_fshead.c
35
printk("ilistino[0]: %u\tilistino[1]: %u\n",
fs/freevxfs/vxfs_fshead.c
92
printk(KERN_ERR "vxfs: unable to read fsh inode\n");
fs/freevxfs/vxfs_fshead.c
98
printk(KERN_ERR "vxfs: fsh list inode is of wrong type (%x)\n",
fs/freevxfs/vxfs_inode.c
166
printk(KERN_WARNING "vxfs: unable to read block %ld\n", block);
fs/freevxfs/vxfs_inode.c
206
printk(KERN_WARNING "vxfs: error on page 0x%p for inode %ld\n",
fs/freevxfs/vxfs_inode.c
29
printk(KERN_DEBUG "\n\n");
fs/freevxfs/vxfs_inode.c
31
printk(KERN_DEBUG "dumping vxfs inode %ld\n", ino);
fs/freevxfs/vxfs_inode.c
33
printk(KERN_DEBUG "dumping unknown vxfs inode\n");
fs/freevxfs/vxfs_inode.c
35
printk(KERN_DEBUG "---------------------------\n");
fs/freevxfs/vxfs_inode.c
36
printk(KERN_DEBUG "mode is %x\n", vip->vii_mode);
fs/freevxfs/vxfs_inode.c
37
printk(KERN_DEBUG "nlink:%u, uid:%u, gid:%u\n",
fs/freevxfs/vxfs_inode.c
39
printk(KERN_DEBUG "size:%Lx, blocks:%u\n",
fs/freevxfs/vxfs_inode.c
41
printk(KERN_DEBUG "orgtype:%u\n", vip->vii_orgtype);
fs/freevxfs/vxfs_olt.c
66
printk(KERN_NOTICE "vxfs: ivalid olt magic number\n");
fs/freevxfs/vxfs_olt.c
75
printk(KERN_NOTICE "vxfs: oltsize > 1 detected.\n");
fs/freevxfs/vxfs_olt.c
76
printk(KERN_NOTICE "vxfs: please notify hch@infradead.org\n");
fs/freevxfs/vxfs_super.c
235
printk(KERN_DEBUG "vxfs: supported VxFS version (%d)\n", j);
fs/freevxfs/vxfs_super.c
236
printk(KERN_DEBUG "vxfs: blocksize: %d\n",
fs/fs_context.c
419
printk(KERN_WARNING "%s%s%pV\n", prefix ? prefix : "",
fs/fs_context.c
423
printk(KERN_ERR "%s%s%pV\n", prefix ? prefix : "",
fs/fs_context.c
427
printk(KERN_INFO "%s%s%pV\n", prefix ? prefix : "",
fs/fs_context.c
431
printk(KERN_NOTICE "%s%s%pV\n", prefix ? prefix : "",
fs/hfs/bnode.c
310
printk(KERN_DEBUG "hfs_btree_del_level\n");
fs/hfs/brec.c
412
printk(KERN_DEBUG "splitting index node...\n");
fs/hfs/btree.c
341
printk(KERN_DEBUG "create new bmap node...\n");
fs/hpfs/hpfs_fn.h
44
#define CHKCOND(x,y) if (!(x)) printk y
fs/isofs/compress.c
113
printk(KERN_DEBUG "zisofs: zisofs_inflateInit returned %d\n",
fs/isofs/compress.c
157
printk(KERN_DEBUG
fs/isofs/dir.c
156
printk(KERN_NOTICE "iso9660: Corrupted directory entry"
fs/isofs/export.c
56
printk(KERN_ERR "isofs: isofs_export_get_parent(): "
fs/isofs/export.c
66
printk(KERN_ERR "isofs: isofs_export_get_parent(): "
fs/isofs/export.c
93
printk(KERN_ERR "isofs: Unable to find the \"..\" "
fs/isofs/inode.c
1035
printk(KERN_DEBUG "%s: block number too large\n", __func__);
fs/isofs/inode.c
1056
printk(KERN_DEBUG "%s: block >= EOF (%lu, %llu)\n",
fs/isofs/inode.c
1082
printk(KERN_DEBUG "%s: More than 100 file sections ?!?"
fs/isofs/inode.c
1084
printk(KERN_DEBUG "%s: block=%lu firstext=%u sect_size=%u "
fs/isofs/inode.c
1119
printk(KERN_DEBUG "%s: Kernel tries to allocate a block\n", __func__);
fs/isofs/inode.c
1259
printk(KERN_INFO "ISOFS: unable to read i-node block %lu\n", block);
fs/isofs/inode.c
1264
printk(KERN_INFO "%s: More than 100 file sections ?!?, aborting...\n"
fs/isofs/inode.c
1377
printk(KERN_DEBUG "ISOFS: Interleaved files not (yet) supported.\n");
fs/isofs/inode.c
1384
printk(KERN_DEBUG "ISOFS: File unit size != 0 for ISO file (%llu).\n",
fs/isofs/inode.c
1392
printk(KERN_DEBUG "ISOFS: Unusual flag settings for ISO file "
fs/isofs/inode.c
1454
printk(KERN_DEBUG "ISOFS: Invalid file type 0%04o for inode %llu.\n",
fs/isofs/inode.c
1467
printk(KERN_WARNING "ISOFS: unable to read i-node block\n");
fs/isofs/inode.c
517
printk(KERN_DEBUG "ISOFS: Session %d start %d type %d\n",
fs/isofs/inode.c
524
printk(KERN_ERR "ISOFS: Invalid session number or type of track\n");
fs/isofs/inode.c
607
printk(KERN_WARNING
fs/isofs/inode.c
614
printk(KERN_ERR
fs/isofs/inode.c
666
printk(KERN_DEBUG "ISO 9660 Extensions: "
fs/isofs/inode.c
774
printk(KERN_DEBUG "ISOFS: Max size:%ld Log zone size:%ld\n",
fs/isofs/inode.c
776
printk(KERN_DEBUG "ISOFS: First datazone:%ld\n", sbi->s_firstdatazone);
fs/isofs/inode.c
778
printk(KERN_DEBUG "ISOFS: Disc in High Sierra format.\n");
fs/isofs/inode.c
878
printk(KERN_NOTICE
fs/isofs/inode.c
894
printk(KERN_NOTICE
fs/isofs/inode.c
914
printk(KERN_DEBUG
fs/isofs/inode.c
934
printk(KERN_WARNING
fs/isofs/inode.c
968
printk(KERN_WARNING "%s: get root inode failed\n", __func__);
fs/isofs/inode.c
975
printk(KERN_WARNING "%s: bread failed, dev=%s, iso_blknum=%d, block=%d\n",
fs/isofs/inode.c
979
printk(KERN_WARNING "ISOFS: Bad logical zone size %ld\n",
fs/isofs/inode.c
983
printk(KERN_WARNING "ISOFS: Logical zone size(%d) < hardware blocksize(%u)\n",
fs/isofs/inode.c
988
printk(KERN_WARNING "ISOFS: Unable to identify CD-ROM format.\n");
fs/isofs/namei.c
95
printk(KERN_NOTICE "iso9660: Corrupted directory entry"
fs/isofs/rock.c
105
printk(KERN_NOTICE "rock: corrupted directory entry. "
fs/isofs/rock.c
136
printk("Unable to read rock-ridge attributes\n");
fs/isofs/rock.c
195
printk(KERN_NOTICE "rock: directory entry would overflow "
fs/isofs/rock.c
197
printk(KERN_NOTICE "rock: sig=0x%02x, size=%d, remaining=%d\n",
fs/isofs/rock.c
278
printk("Unsupported NM flag settings (%d)\n",
fs/isofs/rock.c
386
printk(KERN_DEBUG "ISO 9660 Extensions: ");
fs/isofs/rock.c
390
printk(KERN_CONT "%c", rr->u.ER.data[p]);
fs/isofs/rock.c
392
printk(KERN_CONT "\n");
fs/isofs/rock.c
488
printk("Symlink component flag "
fs/isofs/rock.c
519
printk(KERN_WARNING "Attempt to read inode for "
fs/isofs/rock.c
524
printk(KERN_ERR
fs/isofs/rock.c
532
printk(KERN_ERR
fs/isofs/rock.c
566
printk(KERN_WARNING "isofs: "
fs/isofs/rock.c
591
printk(KERN_WARNING
fs/isofs/rock.c
660
printk("Symlink component flag not implemented (%d)\n",
fs/isofs/rock.c
817
printk("unable to read i-node block");
fs/isofs/rock.c
820
printk("symlink spans iso9660 blocks\n");
fs/isofs/rock.c
97
printk(KERN_NOTICE "rock: corrupted directory entry. "
fs/jbd2/checkpoint.c
109
printk(KERN_ERR "%s: needed %d blocks and "
fs/jbd2/checkpoint.c
112
printk(KERN_ERR "%s: no way to get more "
fs/jbd2/checkpoint.c
214
printk(KERN_ERR
fs/jbd2/commit.c
766
printk(KERN_WARNING
fs/jbd2/journal.c
110
printk(KERN_DEBUG "%s: (%s, %u): %pV", file, func, line, &vaf);
fs/jbd2/journal.c
1315
printk(KERN_WARNING "JBD2: no valid journal superblock found\n");
fs/jbd2/journal.c
1321
printk(KERN_WARNING "JBD2: unrecognised superblock format ID\n");
fs/jbd2/journal.c
1326
printk(KERN_WARNING "JBD2: journal file too short\n");
fs/jbd2/journal.c
1332
printk(KERN_WARNING
fs/jbd2/journal.c
1349
printk(KERN_WARNING "JBD2: Unrecognised features on journal\n");
fs/jbd2/journal.c
1357
printk(KERN_ERR "JBD2: journal file too short %u,%d\n",
fs/jbd2/journal.c
1365
printk(KERN_ERR "JBD2: Can't enable checksumming v2 and v3 "
fs/jbd2/journal.c
1373
printk(KERN_ERR "JBD2: Can't enable checksumming v1 and v2/3 "
fs/jbd2/journal.c
1380
printk(KERN_ERR "JBD2: Unknown checksum type\n");
fs/jbd2/journal.c
1386
printk(KERN_ERR "JBD2: journal checksum error\n");
fs/jbd2/journal.c
1712
printk(KERN_ERR "JBD2: Journal too short (blocks %llu-%llu).\n",
fs/jbd2/journal.c
1727
printk(KERN_WARNING "JBD2: Incorrect Journal head block %lu, "
fs/jbd2/journal.c
1813
printk(KERN_ERR "JBD2: previous I/O error detected "
fs/jbd2/journal.c
1829
printk(KERN_ERR "JBD2: I/O error when updating journal superblock for %s.\n",
fs/jbd2/journal.c
2073
printk(KERN_ERR "JBD2: journal transaction %u on %s "
fs/jbd2/journal.c
2501
printk(KERN_WARNING "JBD2: %s recovery information on journal\n",
fs/jbd2/journal.c
2709
printk(KERN_EMERG "JBD2: no memory for journal_head cache\n");
fs/jbd2/journal.c
2868
printk(KERN_WARNING "%s: freeing b_frozen_data\n", __func__);
fs/jbd2/journal.c
2872
printk(KERN_WARNING "%s: freeing b_committed_data\n", __func__);
fs/jbd2/journal.c
2986
printk(KERN_EMERG "JBD2: failed to create handle cache\n");
fs/jbd2/journal.c
3056
printk(KERN_ERR "JBD2: leaked %d journal_heads!\n", n);
fs/jbd2/journal.c
671
printk(KERN_ERR
fs/jbd2/journal.c
935
printk(KERN_ALERT "%s: journal block not found "
fs/jbd2/recovery.c
135
printk(KERN_ERR "JBD2: corrupted journal superblock\n");
fs/jbd2/recovery.c
142
printk(KERN_ERR "JBD2: bad block at offset %u\n",
fs/jbd2/recovery.c
165
printk(KERN_ERR "JBD2: Failed to read block at offset %u\n",
fs/jbd2/recovery.c
371
printk(KERN_ERR "JBD2: error %d scanning journal\n", err);
fs/jbd2/recovery.c
419
printk(KERN_ERR "JBD2: IO error %d recovering block "
fs/jbd2/recovery.c
635
printk(KERN_ERR
fs/jbd2/recovery.c
90
printk(KERN_ERR "JBD2: bad block at offset %u\n",
fs/jbd2/recovery.c
931
printk(KERN_ERR "JBD2: recovery pass %d ended at "
fs/jbd2/transaction.c
1617
printk(KERN_ERR "JBD2: %s: "
fs/jbd2/transaction.c
1645
printk(KERN_ERR "jbd2_journal_dirty_metadata: %s: "
fs/jbd2/transaction.c
330
printk(KERN_ERR "JBD2: %s wants too many credits "
fs/jbd2/transaction.c
910
printk(KERN_WARNING
fs/jffs2/compr.c
329
printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
fs/jffs2/compr.c
353
printk(KERN_DEBUG "Compressor \"%s\", prio %d\n", this->name, this->priority);
fs/jffs2/debug.c
407
printk(JFFS2_DBG_MSG_PREFIX " Dump node_refs of the eraseblock %#08x\n", jeb->offset);
fs/jffs2/debug.c
409
printk(JFFS2_DBG_MSG_PREFIX " no nodes in the eraseblock %#08x\n", jeb->offset);
fs/jffs2/debug.c
413
printk(JFFS2_DBG);
fs/jffs2/debug.c
415
printk("%#08x", ref_offset(ref));
fs/jffs2/debug.c
417
printk("(%x)", ref->__totlen);
fs/jffs2/debug.c
420
printk("->");
fs/jffs2/debug.c
425
printk("\n" JFFS2_DBG);
fs/jffs2/debug.c
428
printk("\n");
fs/jffs2/debug.c
448
printk(JFFS2_DBG_MSG_PREFIX " dump space accounting for the eraseblock at %#08x:\n",
fs/jffs2/debug.c
451
printk(JFFS2_DBG "used_size: %#08x\n", jeb->used_size);
fs/jffs2/debug.c
452
printk(JFFS2_DBG "dirty_size: %#08x\n", jeb->dirty_size);
fs/jffs2/debug.c
453
printk(JFFS2_DBG "wasted_size: %#08x\n", jeb->wasted_size);
fs/jffs2/debug.c
454
printk(JFFS2_DBG "unchecked_size: %#08x\n", jeb->unchecked_size);
fs/jffs2/debug.c
455
printk(JFFS2_DBG "free_size: %#08x\n", jeb->free_size);
fs/jffs2/debug.c
469
printk(JFFS2_DBG_MSG_PREFIX " dump JFFS2 blocks lists:\n");
fs/jffs2/debug.c
471
printk(JFFS2_DBG "flash_size: %#08x\n", c->flash_size);
fs/jffs2/debug.c
472
printk(JFFS2_DBG "used_size: %#08x\n", c->used_size);
fs/jffs2/debug.c
473
printk(JFFS2_DBG "dirty_size: %#08x\n", c->dirty_size);
fs/jffs2/debug.c
474
printk(JFFS2_DBG "wasted_size: %#08x\n", c->wasted_size);
fs/jffs2/debug.c
475
printk(JFFS2_DBG "unchecked_size: %#08x\n", c->unchecked_size);
fs/jffs2/debug.c
476
printk(JFFS2_DBG "free_size: %#08x\n", c->free_size);
fs/jffs2/debug.c
477
printk(JFFS2_DBG "erasing_size: %#08x\n", c->erasing_size);
fs/jffs2/debug.c
478
printk(JFFS2_DBG "bad_size: %#08x\n", c->bad_size);
fs/jffs2/debug.c
479
printk(JFFS2_DBG "sector_size: %#08x\n", c->sector_size);
fs/jffs2/debug.c
480
printk(JFFS2_DBG "jffs2_reserved_blocks size: %#08x\n",
fs/jffs2/debug.c
484
printk(JFFS2_DBG "nextblock: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
fs/jffs2/debug.c
489
printk(JFFS2_DBG "nextblock: NULL\n");
fs/jffs2/debug.c
492
printk(JFFS2_DBG "gcblock: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
fs/jffs2/debug.c
496
printk(JFFS2_DBG "gcblock: NULL\n");
fs/jffs2/debug.c
499
printk(JFFS2_DBG "clean_list: empty\n");
fs/jffs2/debug.c
510
printk(JFFS2_DBG "clean_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
fs/jffs2/debug.c
516
printk (JFFS2_DBG "Contains %d blocks with total wasted size %u, average wasted size: %u\n",
fs/jffs2/debug.c
521
printk(JFFS2_DBG "very_dirty_list: empty\n");
fs/jffs2/debug.c
533
printk(JFFS2_DBG "very_dirty_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
fs/jffs2/debug.c
539
printk (JFFS2_DBG "Contains %d blocks with total dirty size %u, average dirty size: %u\n",
fs/jffs2/debug.c
544
printk(JFFS2_DBG "dirty_list: empty\n");
fs/jffs2/debug.c
556
printk(JFFS2_DBG "dirty_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
fs/jffs2/debug.c
562
printk (JFFS2_DBG "contains %d blocks with total dirty size %u, average dirty size: %u\n",
fs/jffs2/debug.c
567
printk(JFFS2_DBG "erasable_list: empty\n");
fs/jffs2/debug.c
575
printk(JFFS2_DBG "erasable_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
fs/jffs2/debug.c
583
printk(JFFS2_DBG "erasing_list: empty\n");
fs/jffs2/debug.c
591
printk(JFFS2_DBG "erasing_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
fs/jffs2/debug.c
598
printk(JFFS2_DBG "erase_checking_list: empty\n");
fs/jffs2/debug.c
606
printk(JFFS2_DBG "erase_checking_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
fs/jffs2/debug.c
614
printk(JFFS2_DBG "erase_pending_list: empty\n");
fs/jffs2/debug.c
622
printk(JFFS2_DBG "erase_pending_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
fs/jffs2/debug.c
630
printk(JFFS2_DBG "erasable_pending_wbuf_list: empty\n");
fs/jffs2/debug.c
638
printk(JFFS2_DBG "erasable_pending_wbuf_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
fs/jffs2/debug.c
646
printk(JFFS2_DBG "free_list: empty\n");
fs/jffs2/debug.c
654
printk(JFFS2_DBG "free_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
fs/jffs2/debug.c
662
printk(JFFS2_DBG "bad_list: empty\n");
fs/jffs2/debug.c
670
printk(JFFS2_DBG "bad_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
fs/jffs2/debug.c
678
printk(JFFS2_DBG "bad_used_list: empty\n");
fs/jffs2/debug.c
686
printk(JFFS2_DBG "bad_used_list: %#08x (used %#08x, dirty %#08x, wasted %#08x, unchecked %#08x, free %#08x)\n",
fs/jffs2/debug.c
709
printk(JFFS2_DBG_MSG_PREFIX " dump fragtree of ino #%u\n", f->inocache->ino);
fs/jffs2/debug.c
712
printk(JFFS2_DBG "frag %#04x-%#04x: %#08x(%d) on flash (*%p), left (%p), right (%p), parent (%p)\n",
fs/jffs2/debug.c
717
printk(JFFS2_DBG "frag %#04x-%#04x: hole (*%p). left (%p), right (%p), parent (%p)\n",
fs/jffs2/debug.c
727
printk(JFFS2_DBG "metadata at 0x%08x\n", ref_offset(f->metadata->raw));
fs/jffs2/debug.c
742
printk(JFFS2_DBG_MSG_PREFIX " dump from offset %#08x to offset %#08x (%x bytes).\n",
fs/jffs2/debug.c
748
printk(JFFS2_DBG "%#08x: ", offs);
fs/jffs2/debug.c
751
printk(" ");
fs/jffs2/debug.c
756
printk("\n");
fs/jffs2/debug.c
758
printk(JFFS2_DBG "%0#8x: ", offs);
fs/jffs2/debug.c
761
printk("%02x ", buf[i]);
fs/jffs2/debug.c
766
printk("\n");
fs/jffs2/debug.c
781
printk(JFFS2_DBG_MSG_PREFIX " dump node at offset %#08x.\n", ofs);
fs/jffs2/debug.c
790
printk(JFFS2_DBG "magic:\t%#04x\n", je16_to_cpu(node.u.magic));
fs/jffs2/debug.c
791
printk(JFFS2_DBG "nodetype:\t%#04x\n", je16_to_cpu(node.u.nodetype));
fs/jffs2/debug.c
792
printk(JFFS2_DBG "totlen:\t%#08x\n", je32_to_cpu(node.u.totlen));
fs/jffs2/debug.c
793
printk(JFFS2_DBG "hdr_crc:\t%#08x\n", je32_to_cpu(node.u.hdr_crc));
fs/jffs2/debug.c
813
printk(JFFS2_DBG "the node is inode node\n");
fs/jffs2/debug.c
814
printk(JFFS2_DBG "ino:\t%#08x\n", je32_to_cpu(node.i.ino));
fs/jffs2/debug.c
815
printk(JFFS2_DBG "version:\t%#08x\n", je32_to_cpu(node.i.version));
fs/jffs2/debug.c
816
printk(JFFS2_DBG "mode:\t%#08x\n", node.i.mode.m);
fs/jffs2/debug.c
817
printk(JFFS2_DBG "uid:\t%#04x\n", je16_to_cpu(node.i.uid));
fs/jffs2/debug.c
818
printk(JFFS2_DBG "gid:\t%#04x\n", je16_to_cpu(node.i.gid));
fs/jffs2/debug.c
819
printk(JFFS2_DBG "isize:\t%#08x\n", je32_to_cpu(node.i.isize));
fs/jffs2/debug.c
820
printk(JFFS2_DBG "atime:\t%#08x\n", je32_to_cpu(node.i.atime));
fs/jffs2/debug.c
821
printk(JFFS2_DBG "mtime:\t%#08x\n", je32_to_cpu(node.i.mtime));
fs/jffs2/debug.c
822
printk(JFFS2_DBG "ctime:\t%#08x\n", je32_to_cpu(node.i.ctime));
fs/jffs2/debug.c
823
printk(JFFS2_DBG "offset:\t%#08x\n", je32_to_cpu(node.i.offset));
fs/jffs2/debug.c
824
printk(JFFS2_DBG "csize:\t%#08x\n", je32_to_cpu(node.i.csize));
fs/jffs2/debug.c
825
printk(JFFS2_DBG "dsize:\t%#08x\n", je32_to_cpu(node.i.dsize));
fs/jffs2/debug.c
826
printk(JFFS2_DBG "compr:\t%#02x\n", node.i.compr);
fs/jffs2/debug.c
827
printk(JFFS2_DBG "usercompr:\t%#02x\n", node.i.usercompr);
fs/jffs2/debug.c
828
printk(JFFS2_DBG "flags:\t%#04x\n", je16_to_cpu(node.i.flags));
fs/jffs2/debug.c
829
printk(JFFS2_DBG "data_crc:\t%#08x\n", je32_to_cpu(node.i.data_crc));
fs/jffs2/debug.c
830
printk(JFFS2_DBG "node_crc:\t%#08x\n", je32_to_cpu(node.i.node_crc));
fs/jffs2/debug.c
841
printk(JFFS2_DBG "the node is dirent node\n");
fs/jffs2/debug.c
842
printk(JFFS2_DBG "pino:\t%#08x\n", je32_to_cpu(node.d.pino));
fs/jffs2/debug.c
843
printk(JFFS2_DBG "version:\t%#08x\n", je32_to_cpu(node.d.version));
fs/jffs2/debug.c
844
printk(JFFS2_DBG "ino:\t%#08x\n", je32_to_cpu(node.d.ino));
fs/jffs2/debug.c
845
printk(JFFS2_DBG "mctime:\t%#08x\n", je32_to_cpu(node.d.mctime));
fs/jffs2/debug.c
846
printk(JFFS2_DBG "nsize:\t%#02x\n", node.d.nsize);
fs/jffs2/debug.c
847
printk(JFFS2_DBG "type:\t%#02x\n", node.d.type);
fs/jffs2/debug.c
848
printk(JFFS2_DBG "node_crc:\t%#08x\n", je32_to_cpu(node.d.node_crc));
fs/jffs2/debug.c
849
printk(JFFS2_DBG "name_crc:\t%#08x\n", je32_to_cpu(node.d.name_crc));
fs/jffs2/debug.c
852
printk(JFFS2_DBG "name:\t\"%s\"\n", node.d.name);
fs/jffs2/debug.c
862
printk(JFFS2_DBG "node type is unknown\n");
fs/jffs2/debug.h
92
printk(KERN_DEBUG "[JFFS2 DBG] (%d) %s: " fmt, \
fs/jffs2/erase.c
255
printk(KERN_DEBUG "After remove_node_refs_from_ino_list: \n");
fs/jffs2/erase.c
259
printk(KERN_DEBUG);
fs/jffs2/erase.c
264
printk(KERN_DEBUG);
fs/jffs2/gc.c
283
printk(KERN_DEBUG "Nextblock at %08x, used_size %08x, dirty_size %08x, wasted_size %08x, free_size %08x\n", c->nextblock->offset, c->nextblock->used_size, c->nextblock->dirty_size, c->nextblock->wasted_size, c->nextblock->free_size));
fs/jfs/inode.c
67
printk(KERN_DEBUG "JFS: Invalid file type 0%04o for inode %llu.\n",
fs/jfs/jfs_btree.h
134
printk("btstack dump:\n");
fs/jfs/jfs_btree.h
136
printk(KERN_ERR "bn = %Lx, index = %d\n",
fs/jfs/jfs_debug.h
31
printk(KERN_CRIT "BUG at %s:%d assert(%s)\n", \
fs/jfs/jfs_debug.h
57
printk(KERN_INFO fmt "\n", ## arg); \
fs/jfs/jfs_debug.h
63
printk(KERN_DEBUG fmt "\n", ## arg); \
fs/jfs/jfs_debug.h
69
printk(KERN_WARNING fmt "\n", ## arg); \
fs/jfs/jfs_debug.h
75
printk(KERN_ERR fmt "\n", ## arg); \
fs/jfs/jfs_dmap.c
1443
printk(KERN_ERR "blkno = %Lx, blocks = %Lx\n",
fs/jfs/jfs_dmap.c
446
printk(KERN_ERR "blkno = %Lx, nblocks = %Lx\n",
fs/jfs/jfs_dmap.c
541
printk(KERN_ERR "blkno = %Lx, nblocks = %Lx\n",
fs/jfs/jfs_dtree.c
2632
printk(KERN_ERR "DT_GETPAGE failed!\n");
fs/jfs/jfs_extent.c
21
#define DPD(a) (printk("(a): %d\n",(a)))
fs/jfs/jfs_extent.c
22
#define DPC(a) (printk("(a): %c\n",(a)))
fs/jfs/jfs_extent.c
26
printk("(a): %x%08x ",(a)); \
fs/jfs/jfs_extent.c
28
printk("(a): %x ",(a) << 32); \
fs/jfs/jfs_extent.c
33
printk("(a): %x%08x\n",(a)); \
fs/jfs/jfs_extent.c
35
printk("(a): %x\n",(a) << 32); \
fs/jfs/jfs_extent.c
38
#define DPD1(a) (printk("(a): %d ",(a)))
fs/jfs/jfs_extent.c
39
#define DPX(a) (printk("(a): %08x\n",(a)))
fs/jfs/jfs_extent.c
40
#define DPX1(a) (printk("(a): %08x ",(a)))
fs/jfs/jfs_extent.c
41
#define DPS(a) (printk("%s\n",(a)))
fs/jfs/jfs_extent.c
42
#define DPE(a) (printk("\nENTERING: %s\n",(a)))
fs/jfs/jfs_extent.c
43
#define DPE1(a) (printk("\nENTERING: %s",(a)))
fs/jfs/jfs_extent.c
44
#define DPS1(a) (printk(" %s ",(a)))
fs/jfs/jfs_logmgr.c
1591
printk(KERN_ERR "jfs_flush_journal: synclist not empty\n");
fs/jfs/jfs_metapage.c
352
printk(KERN_ERR "Read error %d at %#llx\n", status,
fs/jfs/jfs_metapage.c
395
printk(KERN_ERR "metapage_write_end_io: I/O error\n");
fs/jfs/jfs_metapage.c
496
printk(KERN_ERR "JFS: metapage_get_blocks failed\n");
fs/jfs/jfs_txnmgr.c
258
printk(KERN_INFO "JFS: nTxBlock = %d, nTxLock = %d\n",
fs/jfs/jfs_txnmgr.c
826
printk(KERN_ERR "txLock: trying to lock locked page!");
fs/jfs/jfs_unicode.c
46
printk(KERN_ERR
fs/jfs/jfs_unicode.c
49
printk(KERN_ERR
fs/jfs/resize.c
100
printk(KERN_WARNING "jfs_extendfs: invalid size\n");
fs/jfs/resize.c
110
printk(KERN_WARNING "jfs_extendfs: read-only file system\n");
fs/jfs/resize.c
308
printk(KERN_ERR "jfs_extendfs: mapSize (0x%Lx) > t64 (0x%Lx)\n",
fs/jfs/resize.c
469
printk(KERN_ERR "jfs_extendfs: diReadSpecial(bmap) failed\n");
fs/jfs/resize.c
84
printk(KERN_WARNING
fs/jfs/resize.c
92
printk(KERN_WARNING "jfs_extendfs: invalid size\n");
fs/jfs/xattr.c
563
printk(KERN_ERR "ea_get: extended attribute size too large: %u > INT_MAX\n",
fs/jfs/xattr.c
568
printk(KERN_ERR "ea_get: invalid extended attribute\n");
fs/jfs/xattr.c
776
printk(KERN_ERR
fs/libfs.c
1071
printk(KERN_WARNING "%s: %s passed in a files array"
fs/lockd/clntlock.c
220
printk(KERN_ERR "lockd: unable to spawn reclaimer "
fs/lockd/clntproc.c
221
printk("nlm_alloc_call: failed, waiting for memory\n");
fs/lockd/clntproc.c
313
printk(KERN_WARNING
fs/lockd/clntproc.c
599
printk(KERN_WARNING "%s: VFS is out of sync with lock manager!\n", __func__);
fs/lockd/clntproc.c
662
printk(KERN_WARNING "lockd: failed to reclaim lock for pid %d "
fs/lockd/clntproc.c
718
printk("lockd: unexpected unlock status: %d\n",
fs/lockd/clntproc.c
766
printk(KERN_WARNING "lockd: unexpected unlock status: %d\n", status);
fs/lockd/clntproc.c
835
printk(KERN_NOTICE "lockd: weird return %d for CANCEL call\n",
fs/lockd/clntproc.c
871
printk(KERN_NOTICE "lockd: unexpected status NLM_BLOCKED\n");
fs/lockd/clntproc.c
886
printk(KERN_NOTICE "lockd: unexpected server status %d\n",
fs/lockd/host.c
511
printk("lockd: couldn't create RPC handle for %s\n", host->h_name);
fs/lockd/host.c
628
printk(KERN_WARNING "lockd: couldn't shutdown host module!\n");
fs/lockd/mon.c
203
printk(KERN_NOTICE "lockd: cannot unmonitor %s\n",
fs/lockd/mon.c
327
printk(KERN_WARNING "Invalid hostname \"%.*s\" "
fs/lockd/svc.c
216
printk(KERN_WARNING
fs/lockd/svc.c
334
printk(KERN_WARNING
fs/lockd/svc.c
347
printk(KERN_WARNING "lockd_up: create service failed\n");
fs/lockd/svclock.c
789
printk(KERN_WARNING "lockd: grant for unknown block\n");
fs/lockd/svclock.c
816
printk(KERN_WARNING "lockd: notification for unknown block!\n");
fs/lockd/svclock.c
893
printk(KERN_WARNING "lockd: unexpected error %d in %s!\n",
fs/lockd/svcsubs.c
203
printk(KERN_WARNING "lockd: attempt to release unknown file!\n");
fs/lockd/svcsubs.c
462
printk(KERN_WARNING
fs/locks.c
1516
printk(KERN_ERR "locks_delete_lock: fasync == %p\n", fl->fl_fasync);
fs/minix/bitmap.c
114
printk("Bad inode number on dev %s: %ld is out of range\n",
fs/minix/bitmap.c
123
printk("Unable to read inode block\n");
fs/minix/bitmap.c
140
printk("Bad inode number on dev %s: %ld is out of range\n",
fs/minix/bitmap.c
149
printk("Unable to read inode block\n");
fs/minix/bitmap.c
193
printk("minix_free_inode: inode 0 or nonexistent inode\n");
fs/minix/bitmap.c
199
printk("minix_free_inode: nonexistent imap in superblock\n");
fs/minix/bitmap.c
208
printk("minix_free_inode: bit %lu already cleared\n", bit);
fs/minix/bitmap.c
241
printk("minix_new_inode: bit already set\n");
fs/minix/bitmap.c
51
printk("Trying to free block not in datazone\n");
fs/minix/bitmap.c
58
printk("minix_free_block: nonexistent bitmap buffer\n");
fs/minix/bitmap.c
64
printk("minix_free_block (%s:%lu): bit already cleared\n",
fs/minix/inode.c
165
printk("MINIX-fs warning: remounting unchecked fs, "
fs/minix/inode.c
168
printk("MINIX-fs warning: remounting fs with errors, "
fs/minix/inode.c
180
printk("minix-fs error: zone size must equal block size. "
fs/minix/inode.c
195
printk("MINIX-fs: file system does not have enough "
fs/minix/inode.c
204
printk("MINIX-fs: file system does not have enough "
fs/minix/inode.c
350
printk("MINIX-fs: mounting unchecked file system, "
fs/minix/inode.c
353
printk("MINIX-fs: mounting file system with errors, "
fs/minix/inode.c
360
printk("MINIX-fs: get root inode failed\n");
fs/minix/inode.c
364
printk("MINIX-fs: bad superblock or unable to read bitmaps\n");
fs/minix/inode.c
376
printk("MINIX-fs: can't allocate map\n");
fs/minix/inode.c
38
printk(KERN_CRIT "minix-fs error (device %s): %s:%d: "
fs/minix/inode.c
381
printk("MINIX-fs: bad superblock\n");
fs/minix/inode.c
386
printk("VFS: Can't find a Minix filesystem V1 | V2 | V3 "
fs/minix/inode.c
393
printk("MINIX-fs: blocksize too small for device\n");
fs/minix/inode.c
397
printk("MINIX-fs: unable to read superblock\n");
fs/minix/inode.c
528
printk(KERN_DEBUG "MINIX-fs: Invalid file type 0%04o for inode %llu.\n",
fs/minix/inode.c
550
printk("MINIX-fs: deleted inode referenced: %llu\n",
fs/minix/inode.c
588
printk("MINIX-fs: deleted inode referenced: %llu\n",
fs/minix/inode.c
700
printk("IO error syncing minix inode [%s:%08llx]\n",
fs/minix/itree_v1.c
30
printk("MINIX-fs: block_to_path: block %ld < 0 on dev %pg\n",
fs/minix/itree_v2.c
33
printk("MINIX-fs: block_to_path: block %ld < 0 on dev %pg\n",
fs/namespace.c
6269
printk(KERN_WARNING "%s: sysfs_init error: %d\n",
fs/namespace.c
6273
printk(KERN_WARNING "%s: kobj create error\n", __func__);
fs/netfs/internal.h
464
printk("[%-6.6s] "FMT"\n", current->comm, ##__VA_ARGS__)
fs/nfs/blocklayout/blocklayout.c
551
printk(KERN_WARNING "NFS: %s: sector not aligned\n", __func__);
fs/nfs/blocklayout/blocklayout.c
810
printk(KERN_ERR "%s: pNFS blksize %d not supported.\n",
fs/nfs/blocklayout/dev.c
308
printk(KERN_WARNING "pNFS: failed to open device %d:%d (%ld)\n",
fs/nfs/blocklayout/dev.c
316
printk(KERN_INFO "pNFS: using block device %s\n",
fs/nfs/blocklayout/rpc_pipefs.c
98
printk(KERN_WARNING "%s failed to decode device: %d\n",
fs/nfs/callback.c
148
printk(KERN_WARNING "NFS: bind callback service failed\n");
fs/nfs/callback.c
161
printk(KERN_ERR "NFS: callback service start failed\n");
fs/nfs/callback.c
190
printk(KERN_WARNING "nfs_callback_create_svc: no kthread, %d users??\n",
fs/nfs/callback.c
197
printk(KERN_ERR "nfs_callback_create_svc: create service failed\n");
fs/nfs/file.c
792
printk(KERN_INFO "NFS: attempt to write to active swap file!\n");
fs/nfs/filelayout/filelayout.c
1140
printk(KERN_INFO "%s: NFSv4 File Layout Driver Registering...\n",
fs/nfs/filelayout/filelayout.c
1147
printk(KERN_INFO "%s: NFSv4 File Layout Driver Unregistering...\n",
fs/nfs/filelayout/filelayout.c
714
printk(KERN_ERR "NFS: Too big fh %d received %d\n",
fs/nfs/filelayout/filelayoutdev.c
128
printk(KERN_WARNING "NFS: %s: multipath count %d greater than "
fs/nfs/filelayout/filelayoutdev.c
136
printk(KERN_WARNING "NFS: %s: stripe index %u >= num ds %u\n",
fs/nfs/filelayout/filelayoutdev.c
272
printk(KERN_ERR "NFS: %s: No data server for offset index %d\n",
fs/nfs/filelayout/filelayoutdev.c
97
printk(KERN_WARNING "NFS: %s: stripe count %d greater than "
fs/nfs/flexfilelayout/flexfilelayout.c
117
printk(KERN_ERR "NFS flexfiles: Too big fh received %d\n",
fs/nfs/flexfilelayout/flexfilelayout.c
3047
printk(KERN_INFO "%s: NFSv4 Flexfile Layout Driver Registering...\n",
fs/nfs/flexfilelayout/flexfilelayout.c
3054
printk(KERN_INFO "%s: NFSv4 Flexfile Layout Driver Unregistering...\n",
fs/nfs/fscache.c
75
printk(KERN_WARNING "NFS: Unknown network family '%d'\n",
fs/nfs/inode.c
1830
printk(KERN_DEFAULT "%s at %p is empty\n", caption, fh);
fs/nfs/inode.c
1834
printk(KERN_DEFAULT "%s at %p is %u bytes, crc: 0x%08x:\n",
fs/nfs/inode.c
1841
printk(KERN_DEFAULT " %08x\n",
fs/nfs/inode.c
1845
printk(KERN_DEFAULT " %08x %08x\n",
fs/nfs/inode.c
1849
printk(KERN_DEFAULT " %08x %08x %08x\n",
fs/nfs/inode.c
1854
printk(KERN_DEFAULT " %08x %08x %08x %08x\n",
fs/nfs/inode.c
2259
printk(KERN_ERR "NFS: server %s error: fileid changed\n"
fs/nfs/inode.c
2274
printk(KERN_DEBUG "NFS: %s: inode %llu mode changed, %07o to %07o\n",
fs/nfs/inode.c
349
printk(KERN_ERR "%s() %s %d "
fs/nfs/nfs4getroot.c
29
printk(KERN_ERR "nfs4_get_rootfh:"
fs/nfs/nfs4idmap.c
203
printk(KERN_NOTICE "NFS: Registering the %s key type\n",
fs/nfs/nfs4proc.c
2297
printk(KERN_ERR "NFS: %s: unhandled error "
fs/nfs/nfs4proc.c
608
printk(KERN_WARNING "NFS: v4 server %s "
fs/nfs/nfs4state.c
1178
printk(KERN_ERR "%s: kthread_run: %ld\n",
fs/nfs/nfs4state.c
1611
printk(KERN_ERR "NFS: %s: unhandled error %d\n", __func__, status);
fs/nfs/nfs4xdr.c
4314
printk(KERN_WARNING "%s: label too long (%u)!\n",
fs/nfs/nfs4xdr.c
4709
printk(KERN_INFO "%s: Warning: Multiple pNFS layout "
fs/nfs/nfs4xdr.c
4913
printk(KERN_INFO "NFS: %s: Warning: Too many (%u) pNFS layout types\n",
fs/nfs/nfs4xdr.c
5845
printk(KERN_WARNING "NFS: %s: Invalid rdma channel attrs "
fs/nfs/nfsroot.c
284
printk(KERN_ERR "Root-NFS: could not allocate memory\n");
fs/nfs/nfsroot.c
287
printk(KERN_ERR "Root-NFS: mount options string too long\n");
fs/nfs/nfsroot.c
290
printk(KERN_ERR "Root-NFS: root device name too long.\n");
fs/nfs/nfsroot.c
306
printk(KERN_ERR "Root-NFS: no NFS server address\n");
fs/nfs/pnfs.c
172
printk(KERN_ERR "NFS: %s: cl_exchange_flags 0x%x\n",
fs/nfs/pnfs.c
200
printk(KERN_ERR "NFS: %s: Error initializing pNFS layout "
fs/nfs/pnfs.c
223
printk(KERN_ERR "NFS: %s id 0 is reserved\n", __func__);
fs/nfs/pnfs.c
227
printk(KERN_ERR "NFS: %s Layout driver must provide "
fs/nfs/pnfs.c
240
printk(KERN_ERR "NFS: %s Module with id %d already loaded!\n",
fs/nfs/pnfs_nfs.c
523
printk(KERN_WARNING "%s NULL device\n", __func__);
fs/nfs/pnfs_nfs.c
526
printk(KERN_WARNING " ds %s\n"
fs/nfs/write.c
1571
printk(KERN_WARNING
fs/nfsd/export.c
1740
printk("nfsd: exp_rootfh path not found %s", name);
fs/nfsd/nfs4idmap.c
179
printk("nfsd: nfsv4 idmapping failing: has idmapd %s?\n",
fs/nfsd/nfs4layouts.c
638
printk(KERN_WARNING
fs/nfsd/nfs4layouts.c
650
printk(KERN_ERR "nfsd: fence failed for client %s: %d!\n",
fs/nfsd/nfs4recover.c
1031
printk(KERN_ERR "NFSD: Unable to create client "
fs/nfsd/nfs4recover.c
1118
printk(KERN_ERR "NFSD: Unable to remove client "
fs/nfsd/nfs4recover.c
1142
printk(KERN_ERR "NFSD: Unable to check client record on "
fs/nfsd/nfs4recover.c
1319
printk(KERN_ERR "NFSD: Unable to end grace period: %d\n", ret);
fs/nfsd/nfs4recover.c
1348
printk(KERN_ERR "NFSD: Unable to end grace period: %d\n", ret);
fs/nfsd/nfs4recover.c
174
printk(KERN_ERR "NFSD: failed to write recovery record"
fs/nfsd/nfs4recover.c
328
printk("NFSD: Failed to remove expired client state directory"
fs/nfsd/nfs4recover.c
340
printk("%s: illegal name %s in recovery directory\n",
fs/nfsd/nfs4recover.c
359
printk("failed to remove client recovery directory %pd\n",
fs/nfsd/nfs4recover.c
389
printk("nfsd4: failed to purge old clients from recovery"
fs/nfsd/nfs4recover.c
400
printk("%s: illegal name %s in recovery directory\n",
fs/nfsd/nfs4recover.c
419
printk("nfsd4: failed loading clients from recovery"
fs/nfsd/nfs4recover.c
435
printk("NFSD: Using %s as the NFSv4 state recovery directory\n",
fs/nfsd/nfs4recover.c
442
printk("NFSD: Unable to change credentials to find recovery"
fs/nfsd/nfs4recover.c
450
printk("NFSD: unable to find recovery directory %s\n",
fs/nfsd/nfs4recover.c
927
printk(KERN_ERR "NFSD: unable to create nfsdcld upcall pipe (%d)\n",
fs/nfsd/nfs4state.c
192
printk("%s: client (clientid %08x/%08x) already expired\n",
fs/nfsd/nfs4state.c
2684
printk(KERN_INFO "NFSD: all clients done reclaiming, ending NFSv4 grace period (net %x)\n",
fs/nfsd/nfs4state.c
7347
printk("unknown stateid type %x\n", s->sc_type);
fs/nfsd/nfs4state.c
9205
printk(KERN_INFO "NFSD: starting %lld-second grace period (net %x)\n",
fs/nfsd/nfs4state.c
9212
printk(KERN_INFO "NFSD: no clients to reclaim, skipping NFSv4 grace period (net %x)\n",
fs/nfsd/nfscache.c
214
printk(KERN_ERR "nfsd: failed to allocate reply cache\n");
fs/nfsd/nfscache.c
599
printk("nfsd: RC_REPLSTAT/reply len %d!\n",len);
fs/nfsd/nfsfh.c
333
printk("nfsd: find_fh_dentry returned a DISCONNECTED directory: %pd2\n",
fs/nfsd/nfsfh.c
692
printk(KERN_ERR "fh_compose: fh %pd2 not initialized!\n",
fs/nfsd/nfsfh.c
696
printk(KERN_ERR "fh_compose: called with maxsize %d! %pd2\n",
fs/nfsd/nfsfh.c
746
printk(KERN_ERR "fh_update: fh not verified!\n");
fs/nfsd/nfsfh.c
749
printk(KERN_ERR "fh_update: %pd2 still negative!\n",
fs/nfsd/nfsfh.c
823
printk("nfsd: inode locked twice during operation.\n");
fs/nfsd/nfsproc.c
328
printk(KERN_WARNING
fs/nfsd/nfsproc.c
531
printk(KERN_WARNING
fs/nfsd/vfs.c
1842
printk(KERN_WARNING "nfsd: bad file type %o in nfsd_create\n",
fs/nilfs2/page.c
160
printk(KERN_CRIT "NILFS_FOLIO_BUG(NULL)\n");
fs/nilfs2/page.c
167
printk(KERN_CRIT "NILFS_FOLIO_BUG(%p): cnt=%d index#=%llu flags=0x%lx "
fs/nilfs2/page.c
178
printk(KERN_CRIT
fs/nilfs2/super.c
135
printk(KERN_CRIT "NILFS error (device %s): %s: %pV\n",
fs/nilfs2/super.c
1394
printk(KERN_INFO "NILFS version 2 loaded\n");
fs/nilfs2/super.c
144
printk(KERN_CRIT "Remounting filesystem read-only\n");
fs/nilfs2/super.c
78
printk("%c%cNILFS (%s): %pV\n",
fs/nilfs2/super.c
81
printk("%c%cNILFS: %pV\n",
fs/notify/inotify/inotify_fsnotify.c
173
printk(KERN_WARNING "fsn_mark->group=%p wd=%d\n",
fs/notify/inotify/inotify_user.c
500
printk(KERN_ERR "%s: i_mark=%p i_mark->wd=%d i_mark->group=%p\n",
fs/ntfs3/super.c
101
printk("%c%cntfs3(%s): %pV\n", KERN_SOH_ASCII, level, sb->s_id, &vaf);
fs/ntfs3/super.c
156
printk("%c%cntfs3(%s): ino=%llx,%s %pV\n", KERN_SOH_ASCII, level,
fs/ocfs2/buffer_head_io.h
47
printk("ocfs2: bh == NULL\n");
fs/ocfs2/cluster/heartbeat.c
1177
printk(KERN_NOTICE "o2hb: Unable to stabilize "
fs/ocfs2/cluster/heartbeat.c
1920
printk(KERN_NOTICE "o2hb: Heartbeat started on region %s (%pg)\n",
fs/ocfs2/cluster/heartbeat.c
2120
printk(KERN_NOTICE "o2hb: Heartbeat %s on region %s (%pg)\n",
fs/ocfs2/cluster/heartbeat.c
2205
printk(KERN_NOTICE "o2hb: Heartbeat mode set to %s\n",
fs/ocfs2/cluster/heartbeat.c
390
printk(KERN_NOTICE "o2hb: node %d hb write hung for %ds on region %s (%pg).\n",
fs/ocfs2/cluster/heartbeat.c
406
printk(KERN_NOTICE "o2hb: all nodes hb write hung, maybe region %s (%pg) is down.\n",
fs/ocfs2/cluster/heartbeat.c
427
printk(KERN_NOTICE "o2hb: node %d hb write hung for %ds on region %s (%pg), negotiate timeout with node %d.\n",
fs/ocfs2/cluster/heartbeat.c
445
printk(KERN_NOTICE "o2hb: receive negotiate timeout message from node %d on region %s (%pg).\n",
fs/ocfs2/cluster/heartbeat.c
461
printk(KERN_NOTICE "o2hb: negotiate timeout approved by master node on region %s (%pg).\n",
fs/ocfs2/cluster/heartbeat.c
871
printk(KERN_NOTICE "o2hb: Region %s (%pg) is now a quorum device\n",
fs/ocfs2/cluster/masklog.c
77
printk("%s(%s,%u,%u):%s:%d %s%pV",
fs/ocfs2/cluster/nodemanager.c
558
printk(KERN_INFO "ocfs2: Changing fence method to %s\n",
fs/ocfs2/cluster/nodemanager.c
844
printk(KERN_ERR "nodemanager: Registration returned %d\n", ret);
fs/ocfs2/cluster/quorum.c
70
printk(KERN_ERR "*** ocfs2 is very sorry to be fencing this "
fs/ocfs2/cluster/tcp.c
1263
printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " Advertised net "
fs/ocfs2/cluster/tcp.c
1281
printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a network "
fs/ocfs2/cluster/tcp.c
1292
printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a keepalive "
fs/ocfs2/cluster/tcp.c
1303
printk(KERN_NOTICE "o2net: " SC_NODEF_FMT " uses a heartbeat "
fs/ocfs2/cluster/tcp.c
1501
printk(KERN_NOTICE "o2net: Connection to " SC_NODEF_FMT " has been "
fs/ocfs2/cluster/tcp.c
1649
printk(KERN_NOTICE "o2net: Connect attempt to " SC_NODEF_FMT
fs/ocfs2/cluster/tcp.c
1673
printk(KERN_NOTICE "o2net: No connection established with "
fs/ocfs2/cluster/tcp.c
1825
printk(KERN_NOTICE "o2net: Attempt to connect from unknown "
fs/ocfs2/cluster/tcp.c
1835
printk(KERN_NOTICE "o2net: Unexpected connect attempt "
fs/ocfs2/cluster/tcp.c
1868
printk(KERN_NOTICE "o2net: Attempt to connect from node '%s' "
fs/ocfs2/cluster/tcp.c
1990
printk(KERN_ERR "o2net: Error %d while creating socket\n", ret);
fs/ocfs2/cluster/tcp.c
2007
printk(KERN_ERR "o2net: Error %d while binding socket at "
fs/ocfs2/cluster/tcp.c
2014
printk(KERN_ERR "o2net: Error %d while listening on %pI4:%u\n",
fs/ocfs2/cluster/tcp.c
531
printk(KERN_NOTICE "o2net: No longer connected to "
fs/ocfs2/cluster/tcp.c
539
printk(KERN_NOTICE "o2net: %s " SC_NODEF_FMT "\n",
fs/ocfs2/cluster/tcp.c
632
printk(KERN_INFO "o2net: Connection to " SC_NODEF_FMT
fs/ocfs2/dlm/dlmdebug.c
100
printk(" inflight locks: %d, asts reserved: %d\n",
fs/ocfs2/dlm/dlmdebug.c
103
printk(" granted queue:\n");
fs/ocfs2/dlm/dlmdebug.c
107
printk(" converting queue:\n");
fs/ocfs2/dlm/dlmdebug.c
111
printk(" blocked queue:\n");
fs/ocfs2/dlm/dlmdebug.c
46
printk(" refmap nodes: [ ");
fs/ocfs2/dlm/dlmdebug.c
52
printk("%u ", bit);
fs/ocfs2/dlm/dlmdebug.c
55
printk("], inflight=%u\n", res->inflight_locks);
fs/ocfs2/dlm/dlmdebug.c
62
printk(" type=%d, conv=%d, node=%u, cookie=%u:%llu, "
fs/ocfs2/dlm/dlmdebug.c
90
printk("lockres: %s, owner=%u, state=%u\n",
fs/ocfs2/dlm/dlmdebug.c
92
printk(" last used: %lu, refcnt: %u, on purge list: %s\n",
fs/ocfs2/dlm/dlmdebug.c
95
printk(" on dirty list: %s, on reco list: %s, "
fs/ocfs2/dlm/dlmdomain.c
1686
printk(KERN_NOTICE "o2dlm: Joining domain %s ", dlm->name);
fs/ocfs2/dlm/dlmdomain.c
537
printk("( ");
fs/ocfs2/dlm/dlmdomain.c
540
printk("%d ", node);
fs/ocfs2/dlm/dlmdomain.c
543
printk(") %u nodes\n", num);
fs/ocfs2/dlm/dlmdomain.c
563
printk(KERN_NOTICE "o2dlm: Node %u leaves domain %s ", node, dlm->name);
fs/ocfs2/dlm/dlmdomain.c
720
printk(KERN_NOTICE "o2dlm: Leaving domain %s\n", dlm->name);
fs/ocfs2/dlm/dlmdomain.c
944
printk(KERN_NOTICE "o2dlm: Node %u joins domain %s ",
fs/ocfs2/dlm/dlmrecovery.c
1956
printk("lockres lvb=[");
fs/ocfs2/dlm/dlmrecovery.c
1958
printk("%02x", res->lvb[i]);
fs/ocfs2/dlm/dlmrecovery.c
1959
printk("]\nmigrated lvb=[");
fs/ocfs2/dlm/dlmrecovery.c
1961
printk("%02x", mres->lvb[i]);
fs/ocfs2/dlm/dlmrecovery.c
1962
printk("]\n");
fs/ocfs2/dlm/dlmrecovery.c
343
printk(KERN_NOTICE "o2dlm: Waiting on the death of node %u in "
fs/ocfs2/dlm/dlmrecovery.c
360
printk(KERN_NOTICE "o2dlm: Waiting on the recovery of node %u in "
fs/ocfs2/dlm/dlmrecovery.c
404
printk(KERN_NOTICE "o2dlm: Begin recovery on domain %s for node %u\n",
fs/ocfs2/dlm/dlmrecovery.c
415
printk(KERN_NOTICE "o2dlm: End recovery on domain %s\n", dlm->name);
fs/ocfs2/dlm/dlmrecovery.c
421
printk(KERN_NOTICE "o2dlm: Node %u (%s) is the Recovery Master for the "
fs/ocfs2/dlmfs/dlmfs.c
613
printk("OCFS2 User DLM kernel interface loaded\n");
fs/ocfs2/dlmfs/dlmfs.c
78
printk(KERN_ERR "%s: readonly parameter\n", kp->name);
fs/ocfs2/extent_map.h
68
printk("ocfs2: bh == NULL\n");
fs/ocfs2/journal.c
1746
printk(KERN_NOTICE "ocfs2: Begin replay journal (node %d, slot %d) on "\
fs/ocfs2/journal.c
1801
printk(KERN_NOTICE "ocfs2: End replay journal (node %d, slot %d) on "\
fs/ocfs2/localalloc.c
924
printk("ocfs2_verify_zero_bits: start = %u, count = "
fs/ocfs2/localalloc.c
926
printk("ocfs2_verify_zero_bits: bit %u is set!",
fs/ocfs2/quota_local.c
401
printk(KERN_NOTICE "ocfs2: Beginning quota recovery on device (%s) for "
fs/ocfs2/quota_local.c
598
printk(KERN_NOTICE "ocfs2: Finishing quota recovery on device (%s) for "
fs/ocfs2/quota_local.c
615
printk(KERN_NOTICE "ocfs2: Skipping quota recovery on "
fs/ocfs2/resize.c
253
printk(KERN_WARNING "ocfs2: Failed to update super blocks on %s"
fs/ocfs2/slot_map.c
495
printk(KERN_INFO "ocfs2: Slot %d on device (%s) was already "
fs/ocfs2/stack_o2cb.c
262
printk(KERN_ERR "o2cb: This node has not been configured.\n");
fs/ocfs2/stack_o2cb.c
278
printk(KERN_ERR "o2cb: %s heartbeat has not been "
fs/ocfs2/stack_o2cb.c
292
printk(KERN_ERR "o2cb: This node could not connect to nodes:");
fs/ocfs2/stack_o2cb.c
297
printk(" %u", i);
fs/ocfs2/stack_o2cb.c
299
printk(".\n");
fs/ocfs2/stack_o2cb.c
312
printk(KERN_NOTICE "o2cb: o2dlm has evicted node %d from domain %.*s\n",
fs/ocfs2/stack_o2cb.c
332
printk(KERN_ERR "o2cb: Cluster check failed. Fix errors "
fs/ocfs2/stack_user.c
1007
printk(KERN_ERR "ocfs2: Could not determine"
fs/ocfs2/stack_user.c
1021
printk(KERN_ERR
fs/ocfs2/stack_user.c
217
printk(KERN_ERR
fs/ocfs2/stack_user.c
562
printk(KERN_ERR
fs/ocfs2/stack_user.c
628
printk(KERN_ERR
fs/ocfs2/stack_user.c
804
printk(KERN_ERR "%s lkid %x error %d\n",
fs/ocfs2/stack_user.c
812
printk(KERN_ERR "%s lkid %x status %d\n",
fs/ocfs2/stack_user.c
830
printk(KERN_ERR "%s lkid %x flags %x mode %d error %d\n",
fs/ocfs2/stack_user.c
840
printk(KERN_ERR "%s lkid %x flags %x mode %d status %d\n",
fs/ocfs2/stack_user.c
918
printk(KERN_INFO "ocfs2: Node %d/%d down. Initiating recovery.\n",
fs/ocfs2/stack_user.c
981
printk(KERN_ERR "ocfs2: Unable to create the "
fs/ocfs2/stack_user.c
991
printk(KERN_NOTICE "ocfs2: You seem to be using an older "
fs/ocfs2/stackglue.c
121
printk(KERN_ERR
fs/ocfs2/stackglue.c
138
printk(KERN_ERR
fs/ocfs2/stackglue.c
142
printk(KERN_ERR
fs/ocfs2/stackglue.c
172
printk(KERN_INFO "ocfs2: Registered cluster interface %s\n",
fs/ocfs2/stackglue.c
176
printk(KERN_ERR "ocfs2: Stack \"%s\" already registered\n",
fs/ocfs2/stackglue.c
197
printk(KERN_INFO "ocfs2: Unregistered cluster interface %s\n",
fs/ocfs2/stackglue.c
200
printk(KERN_ERR "Stack \"%s\" is not registered\n",
fs/ocfs2/stackglue.c
434
printk(KERN_ERR
fs/ocfs2/stackglue.c
677
printk(KERN_ERR
fs/ocfs2/super.c
1057
printk(KERN_NOTICE "ocfs2: Readonly device (%s) detected. "
fs/ocfs2/super.c
1127
printk(KERN_INFO "ocfs2: Mounting device (%s) on (node %s, slot %d) "
fs/ocfs2/super.c
1880
printk(KERN_INFO "ocfs2: Unmounting device (%s) on (node %s)\n",
fs/ocfs2/super.c
2364
printk(KERN_NOTICE "ocfs2: File system on device (%s) was not "
fs/ocfs2/super.c
2510
printk(KERN_CRIT "OCFS2: ERROR (device %s): %s: %pV",
fs/ocfs2/super.c
2532
printk(KERN_CRIT "OCFS2: abort (device %s): %s: %pV",
fs/omfs/dir.c
325
printk(KERN_WARNING "omfs: bad hash chain detected\n");
fs/omfs/inode.c
127
printk(KERN_WARNING "omfs: unknown file type: %d\n",
fs/omfs/inode.c
492
printk(KERN_ERR "omfs: Invalid superblock (%x)\n",
fs/omfs/inode.c
506
printk(KERN_ERR "omfs: sysblock number (%llx) is out of range\n",
fs/omfs/inode.c
512
printk(KERN_ERR "omfs: sysblock size (%d) is out of range\n",
fs/omfs/inode.c
518
printk(KERN_ERR "omfs: sysblock size (%d) is too small\n",
fs/omfs/inode.c
525
printk(KERN_ERR "omfs: block size (%d) is out of range\n",
fs/omfs/inode.c
554
printk(KERN_ERR "omfs: block count discrepancy between "
fs/omfs/inode.c
563
printk(KERN_ERR "omfs: free space bitmap location is corrupt "
fs/omfs/inode.c
571
printk(KERN_ERR "omfs: cluster size out of range (%d)",
fs/omfs/inode.c
593
printk(KERN_DEBUG "omfs: Mounted volume %s\n", omfs_rb->r_name);
fs/openpromfs/inode.c
406
printk("openprom_fill_super: get root inode failed\n");
fs/orangefs/inode.c
133
printk("writepages_callback not private!\n");
fs/orangefs/inode.c
452
printk("invalidate range offset %llu length %zu\n",
fs/orangefs/inode.c
454
printk("write range offset %llu length %zu\n",
fs/orangefs/protocol.h
359
printk(KERN_DEBUG fmt, ##__VA_ARGS__); \
fs/qnx4/bitmap.c
34
printk(KERN_ERR "qnx4: I/O error in counting free blocks\n");
fs/qnx4/dir.c
35
printk(KERN_ERR "qnx4_readdir: bread failed (%ld)\n", blknum);
fs/qnx4/inode.c
219
printk(KERN_ERR "qnx4: unable to read the superblock\n");
fs/qnx4/inode.c
228
printk(KERN_ERR "qnx4: %s\n", errmsg);
fs/qnx4/inode.c
235
printk(KERN_ERR "qnx4: get inode failed\n");
fs/qnx4/inode.c
302
printk(KERN_ERR "qnx4: bad inode number on dev %s: %lu is "
fs/qnx4/inode.c
311
printk(KERN_ERR "qnx4: major problem: unable to read inode from dev "
fs/qnx4/inode.c
343
printk(KERN_ERR "qnx4: bad inode %lu on dev %s\n",
fs/qnx4/inode.c
422
printk(KERN_INFO "QNX4 filesystem 0.2.3 registered.\n");
fs/qnx4/namei.c
34
printk(KERN_WARNING "qnx4: matching unassigned buffer !\n");
fs/qnx4/qnx4.h
8
#define QNX4DEBUG(X) printk X
fs/quota/dquot.c
1139
printk(KERN_WARNING "VFS (%s): Writes happened after quota"
fs/quota/dquot.c
148
printk(KERN_ERR "Quota error (device %s): %s: %pV\n",
fs/quota/dquot.c
3028
printk(KERN_NOTICE "VFS: Disk quotas %s\n", __DQUOT_VERSION__);
fs/quota/netlink.c
52
printk(KERN_ERR
fs/quota/netlink.c
59
printk(KERN_ERR
fs/quota/netlink.c
90
printk(KERN_ERR "VFS: Not enough space to compose quota message!\n");
fs/quota/netlink.c
99
printk(KERN_ERR
fs/quota/quota_v1.c
153
printk(KERN_INFO
fs/stat.c
390
printk(KERN_WARNING "VFS: Warning: %s using old stat() call. Recompile your binary.\n",
fs/super.c
1071
printk("Emergency Remount complete\n");
fs/super.c
1115
printk(KERN_WARNING "Emergency Thaw complete\n");
fs/super.c
2084
printk(KERN_ERR
fs/sync.c
130
printk("Emergency Sync complete\n");
fs/sysfs/file.c
123
printk("fill_read_buffer: %pS returned bad count\n", ops->show);
fs/ufs/util.c
206
printk(KERN_ERR "ufs_change_blocknr: read_mapping_folio error: ino %llu, index: %lu\n",
fs/verity/init.c
53
printk("%sfs-verity (%s, inode %llu): %pV\n",
fs/verity/init.c
56
printk("%sfs-verity: %pV\n", level, &vaf);
fs/xfs/libxfs/xfs_rtgroup.c
311
printk(KERN_CONT " rgno=%u metatype=%s", ip->i_projid,
fs/xfs/xfs_dahash_test.c
667
printk(KERN_ERR "xfs dir/attr hash test failed %u times!",
fs/xfs/xfs_message.c
24
printk("%sXFS (%s): %pV\n", level, mp->m_super->s_id, vaf);
fs/xfs/xfs_message.c
27
printk("%sXFS: %pV\n", level, vaf);
fs/xfs/xfs_super.c
2602
printk(KERN_INFO XFS_VERSION_STRING " with "
include/acpi/processor.h
343
printk(KERN_WARNING
include/acpi/processor.h
345
printk(KERN_WARNING
include/asm-generic/bug.h
74
printk("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
include/asm-generic/hardirq.h
22
printk(KERN_CRIT "unexpected IRQ trap at vector %02x\n", irq);
include/drm/drm_print.h
691
printk##once(KERN_##level "[" DRM_NAME "] " fmt, ##__VA_ARGS__)
include/kunit/test.h
662
printk(lvl fmt, ##__VA_ARGS__); \
include/linux/dynamic_debug.h
347
printk(KERN_WARNING "dyndbg param is supported only in "
include/linux/hdlc.h
80
printk("...\n");
include/linux/hdlc.h
83
printk(" %02X", skb->data[i]);
include/linux/hdlc.h
85
printk("\n");
include/linux/jbd2.h
362
printk(KERN_ERR \
include/linux/jbd2.h
365
printk(KERN_ERR why "\n"); \
include/linux/kallsyms.h
171
printk("%s[<%px>] %pS\n", loglvl, (void *) ip, (void *) ip);
include/linux/moduleloader.h
100
printk(KERN_ERR "module %s: REL relocation unsupported\n",
include/linux/moduleloader.h
60
printk(KERN_ERR "module %s: REL relocation unsupported\n",
include/linux/parport_pc.h
100
if (ecr & 0x01) printk (",f_empty");
include/linux/parport_pc.h
102
printk ("] dcr(%s)=[", i ? "soft" : "hard");
include/linux/parport_pc.h
106
printk ("rev");
include/linux/parport_pc.h
108
printk ("fwd");
include/linux/parport_pc.h
110
if (dcr & 0x10) printk (",ackIntEn");
include/linux/parport_pc.h
111
if (!(dcr & 0x08)) printk (",N-SELECT-IN");
include/linux/parport_pc.h
112
if (dcr & 0x04) printk (",N-INIT");
include/linux/parport_pc.h
113
if (!(dcr & 0x02)) printk (",N-AUTOFD");
include/linux/parport_pc.h
114
if (!(dcr & 0x01)) printk (",N-STROBE");
include/linux/parport_pc.h
116
printk ("] dsr=[");
include/linux/parport_pc.h
117
if (!(dsr & 0x80)) printk ("BUSY");
include/linux/parport_pc.h
118
if (dsr & 0x40) printk (",N-ACK");
include/linux/parport_pc.h
119
if (dsr & 0x20) printk (",PERROR");
include/linux/parport_pc.h
120
if (dsr & 0x10) printk (",SELECT");
include/linux/parport_pc.h
121
if (dsr & 0x08) printk (",N-FAULT");
include/linux/parport_pc.h
122
printk ("]\n");
include/linux/parport_pc.h
138
printk (KERN_DEBUG
include/linux/parport_pc.h
169
printk (KERN_DEBUG "%s (%s): use data_reverse for this!\n",
include/linux/parport_pc.h
198
printk (KERN_DEBUG "%s (%s): use data_%s for this!\n",
include/linux/parport_pc.h
69
printk (KERN_DEBUG "parport_pc_write_data(%p,0x%02x)\n", p, d);
include/linux/parport_pc.h
78
printk (KERN_DEBUG "parport_pc_read_data(%p) = 0x%02x\n",
include/linux/parport_pc.h
95
printk (KERN_DEBUG "*** parport state (%s): ecr=[%s", str, ecr_modes[(ecr & 0xe0) >> 5]);
include/linux/parport_pc.h
96
if (ecr & 0x10) printk (",nErrIntrEn");
include/linux/parport_pc.h
97
if (ecr & 0x08) printk (",dmaEn");
include/linux/parport_pc.h
98
if (ecr & 0x04) printk (",serviceIntr");
include/linux/parport_pc.h
99
if (ecr & 0x02) printk (",f_full");
include/linux/printk.h
524
printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__)
include/linux/printk.h
534
printk(KERN_ALERT pr_fmt(fmt), ##__VA_ARGS__)
include/linux/printk.h
544
printk(KERN_CRIT pr_fmt(fmt), ##__VA_ARGS__)
include/linux/printk.h
554
printk(KERN_ERR pr_fmt(fmt), ##__VA_ARGS__)
include/linux/printk.h
564
printk(KERN_WARNING pr_fmt(fmt), ##__VA_ARGS__)
include/linux/printk.h
574
printk(KERN_NOTICE pr_fmt(fmt), ##__VA_ARGS__)
include/linux/printk.h
584
printk(KERN_INFO pr_fmt(fmt), ##__VA_ARGS__)
include/linux/printk.h
596
printk(KERN_CONT fmt, ##__VA_ARGS__)
include/linux/printk.h
610
printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
include/linux/printk.h
638
printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__)
include/linux/printk.h
650
DO_ONCE_LITE(printk, fmt, ##__VA_ARGS__)
include/linux/printk.h
705
printk(fmt, ##__VA_ARGS__); \
include/linux/sunrpc/debug.h
34
# define __sunrpc_printk(fmt, ...) printk(KERN_DEFAULT fmt, ##__VA_ARGS__)
include/linux/suspend.h
543
printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); \
include/media/dvbdev.h
469
printk(KERN_ERR "DVB: Unable to find symbol "#FUNCTION"()\n"); \
include/media/v4l2-common.h
24
printk(level "%s %d-%04x: " fmt, name, i2c_adapter_id(adapter), addr , ## arg)
include/media/v4l2-common.h
58
printk(level "%s: " fmt, (dev)->name , ## arg)
include/misc/altera.h
30
printk(KERN_WARNING "%s: driver disabled by Kconfig\n", __func__);
include/net/ip_vs.h
236
printk(KERN_DEBUG pr_fmt(msg), ##__VA_ARGS__); \
include/net/ip_vs.h
254
printk(KERN_DEBUG pr_fmt(msg), ##__VA_ARGS__); \
include/net/ip_vs.h
259
printk(KERN_DEBUG pr_fmt(msg), ##__VA_ARGS__); \
include/net/netfilter/nf_conntrack_tuple.h
88
printk("tuple %p: %u %pI4:%hu -> %pI4:%hu\n",
include/net/netfilter/nf_conntrack_tuple.h
98
printk("tuple %p: %u %pI6 %hu -> %pI6 %hu\n",
include/trace/events/printk.h
3
#define TRACE_SYSTEM printk
include/video/neomagic.h
78
# define DBG(x) printk (KERN_DEBUG "neofb: %s\n", (x));
include/video/sstfb.h
21
# define dprintk(X...) printk("sstfb: " X)
include/video/sstfb.h
64
printk(" :\n"); \
include/video/trident.h
8
#define debug(f, a...) printk("%s:" f, __func__ , ## a);
init/calibrate.c
102
printk(KERN_NOTICE "calibrate_delay_direct() ignoring "
init/calibrate.c
141
printk(KERN_NOTICE "calibrate_delay_direct() dropping "
init/calibrate.c
147
printk(KERN_NOTICE "calibrate_delay_direct() dropping "
init/calibrate.c
167
printk(KERN_NOTICE "calibrate_delay_direct() failed to get a good "
init/do_mounts.c
164
printk(KERN_INFO
init/do_mounts.c
213
printk("VFS: Cannot open root device \"%s\" or %s: error %d\n",
init/do_mounts.c
215
printk("Please append a correct \"root=\" boot option; here are the available partitions:\n");
init/do_mounts.c
236
printk("List of all partitions:\n");
init/do_mounts.c
238
printk("No filesystem could mount root, tried: ");
init/do_mounts.c
240
printk(" %s", p);
init/do_mounts.c
241
printk("\n");
init/do_mounts.c
460
printk(KERN_INFO "Waiting %d sec before mounting root device...\n",
init/do_mounts_rd.c
105
printk(KERN_NOTICE
init/do_mounts_rd.c
114
printk(KERN_NOTICE
init/do_mounts_rd.c
129
printk(KERN_NOTICE
init/do_mounts_rd.c
145
printk(KERN_NOTICE
init/do_mounts_rd.c
155
printk(KERN_NOTICE
init/do_mounts_rd.c
162
printk(KERN_NOTICE
init/do_mounts_rd.c
215
printk("RAMDISK: image too big! (%dKiB/%ldKiB)\n",
init/do_mounts_rd.c
226
printk(KERN_ERR "RAMDISK: could not determine device size\n");
init/do_mounts_rd.c
232
printk(KERN_ERR "RAMDISK: could not allocate buffer\n");
init/do_mounts_rd.c
274
printk(KERN_ERR "RAMDISK: error while reading compressed data");
init/do_mounts_rd.c
276
printk(KERN_ERR "RAMDISK: EOF while reading compressed data");
init/do_mounts_rd.c
285
printk(KERN_ERR
init/do_mounts_rd.c
296
printk(KERN_ERR "%s\n", x);
init/do_mounts_rd.c
84
printk(KERN_NOTICE "RAMDISK: %s image found at block %d\n",
init/do_mounts_rd.c
87
printk(KERN_EMERG
init/do_mounts_rd.c
97
printk(KERN_NOTICE
init/initramfs.c
704
printk(KERN_INFO "rootfs image is not initramfs (%s); looks like an initrd\n",
init/initramfs.c
730
printk(KERN_INFO "Trying to unpack rootfs image as initramfs...\n");
init/initramfs.c
732
printk(KERN_INFO "Unpacking initramfs...\n");
init/initramfs.c
739
printk(KERN_EMERG "Initramfs unpacking failed: %s\n", err);
init/main.c
1279
printk(KERN_DEBUG "calling %pS @ %i\n", fn, task_pid_nr(current));
init/main.c
1289
printk(KERN_DEBUG "initcall %pS returned %d after %lld usecs\n",
init/main.c
1296
printk(KERN_DEBUG "entering initcall level: %s\n", level);
init/noinitramfs.c
39
printk(KERN_WARNING "Failed to create a rootfs\n");
kernel/cred.c
25
printk("[%-5.5s%5u] " FMT "\n", \
kernel/debug/gdbstub.c
446
printk(KERN_ERR "KGDB: Internal thread select error\n");
kernel/debug/gdbstub.c
680
printk(KERN_CRIT "Executing emergency reboot\n");
kernel/debug/kdb/kdb_io.c
787
printk("%s", kdb_buffer);
kernel/debug/kdb/kdb_io.c
834
printk("%s", moreprompt);
kernel/dma.c
91
printk(KERN_WARNING "Trying to free DMA%d\n", dmanr);
kernel/dma.c
96
printk(KERN_WARNING "Trying to free free DMA%d\n", dmanr);
kernel/events/core.c
563
printk(KERN_WARNING
kernel/irq/debug.h
18
printk("irq %d, desc: %p, depth: %d, count: %d, unhandled: %d\n",
kernel/irq/debug.h
20
printk("->handle_irq(): %p, %pS\n",
kernel/irq/debug.h
22
printk("->irq_data.chip(): %p, %pS\n",
kernel/irq/debug.h
24
printk("->action(): %p\n", desc->action);
kernel/irq/debug.h
26
printk("->action->handler(): %p, %pS\n",
kernel/irq/debug.h
6
#define ___P(f) if (desc->status_use_accessors & f) printk("%14s set\n", #f)
kernel/irq/debug.h
7
#define ___PS(f) if (desc->istate & f) printk("%14s set\n", #f)
kernel/irq/handle.c
57
printk(KERN_WARNING "IRQ %d device %s returned IRQ_WAKE_THREAD "
kernel/irq/irqdesc.c
561
printk(KERN_INFO "NR_IRQS: %d, nr_irqs: %d, preallocated irqs: %d\n",
kernel/locking/lockdep.c
1031
printk(KERN_INFO "class %s: mismatch for lock entry %ld; class %s <> %s",
kernel/locking/lockdep.c
1061
printk(KERN_INFO "chain %lld: key %#llx <> %#llx\n",
kernel/locking/lockdep.c
1098
printk(KERN_INFO "class %px/%s is not in any class list\n",
kernel/locking/lockdep.c
1129
printk(KERN_INFO "list entry %d is not in any class list; class %s <> %s\n",
kernel/locking/lockdep.c
1144
printk(KERN_INFO "list entry %d occurs in a class list; class %s <> %s\n",
kernel/locking/lockdep.c
1366
printk("\nnew class %px: %s", class->key, class->name);
kernel/locking/lockdep.c
1368
printk(KERN_CONT "#%d", class->name_version);
kernel/locking/lockdep.c
1369
printk(KERN_CONT "\n");
kernel/locking/lockdep.c
1880
printk("\n-> #%u", depth);
kernel/locking/lockdep.c
1882
printk(KERN_CONT ":\n");
kernel/locking/lockdep.c
1911
printk("Chain exists of:\n ");
kernel/locking/lockdep.c
1913
printk(KERN_CONT " --> ");
kernel/locking/lockdep.c
1915
printk(KERN_CONT " --> ");
kernel/locking/lockdep.c
1917
printk(KERN_CONT "\n\n");
kernel/locking/lockdep.c
1920
printk(" Possible unsafe locking scenario:\n\n");
kernel/locking/lockdep.c
1921
printk(" CPU0 CPU1\n");
kernel/locking/lockdep.c
1922
printk(" ---- ----\n");
kernel/locking/lockdep.c
1924
printk(" rlock(");
kernel/locking/lockdep.c
1926
printk(" lock(");
kernel/locking/lockdep.c
1928
printk(KERN_CONT ");\n");
kernel/locking/lockdep.c
1929
printk(" lock(");
kernel/locking/lockdep.c
1931
printk(KERN_CONT ");\n");
kernel/locking/lockdep.c
1932
printk(" lock(");
kernel/locking/lockdep.c
1934
printk(KERN_CONT ");\n");
kernel/locking/lockdep.c
1936
printk(" rlock(");
kernel/locking/lockdep.c
1938
printk(" sync(");
kernel/locking/lockdep.c
1940
printk(" lock(");
kernel/locking/lockdep.c
1942
printk(KERN_CONT ");\n");
kernel/locking/lockdep.c
1943
printk("\n *** DEADLOCK ***\n\n");
kernel/locking/lockdep.c
2036
printk("\nother info that might help us debug this:\n\n");
kernel/locking/lockdep.c
2042
printk("\nstack backtrace:\n");
kernel/locking/lockdep.c
2335
printk("%*s->", depth, "");
kernel/locking/lockdep.c
2338
printk(KERN_CONT " ops: %lu", debug_class_ops_read(class));
kernel/locking/lockdep.c
2340
printk(KERN_CONT " {\n");
kernel/locking/lockdep.c
2346
len += printk("%*s %s", depth, "", usage_str[bit]);
kernel/locking/lockdep.c
2347
len += printk(KERN_CONT " at:\n");
kernel/locking/lockdep.c
2351
printk("%*s }\n", depth, "");
kernel/locking/lockdep.c
2353
printk("%*s ... key at: [<%px>] %pS\n",
kernel/locking/lockdep.c
2421
printk("%*s ... acquired at:\n", depth, "");
kernel/locking/lockdep.c
2423
printk("\n");
kernel/locking/lockdep.c
2426
printk("lockdep:%s bad path found in chain graph\n", __func__);
kernel/locking/lockdep.c
2469
printk("%*s ... acquired at:\n", depth, "");
kernel/locking/lockdep.c
2471
printk("\n");
kernel/locking/lockdep.c
2481
printk("lockdep:%s bad path found in chain graph\n", __func__);
kernel/locking/lockdep.c
2517
printk("Chain exists of:\n ");
kernel/locking/lockdep.c
2519
printk(KERN_CONT " --> ");
kernel/locking/lockdep.c
2521
printk(KERN_CONT " --> ");
kernel/locking/lockdep.c
2523
printk(KERN_CONT "\n\n");
kernel/locking/lockdep.c
2526
printk(" Possible interrupt unsafe locking scenario:\n\n");
kernel/locking/lockdep.c
2527
printk(" CPU0 CPU1\n");
kernel/locking/lockdep.c
2528
printk(" ---- ----\n");
kernel/locking/lockdep.c
2529
printk(" lock(");
kernel/locking/lockdep.c
2531
printk(KERN_CONT ");\n");
kernel/locking/lockdep.c
2532
printk(" local_irq_disable();\n");
kernel/locking/lockdep.c
2533
printk(" lock(");
kernel/locking/lockdep.c
2535
printk(KERN_CONT ");\n");
kernel/locking/lockdep.c
2536
printk(" lock(");
kernel/locking/lockdep.c
2538
printk(KERN_CONT ");\n");
kernel/locking/lockdep.c
2539
printk(" <Interrupt>\n");
kernel/locking/lockdep.c
2540
printk(" lock(");
kernel/locking/lockdep.c
2542
printk(KERN_CONT ");\n");
kernel/locking/lockdep.c
2543
printk("\n *** DEADLOCK ***\n\n");
kernel/locking/lockdep.c
2996
printk(" Possible unsafe locking scenario:\n\n");
kernel/locking/lockdep.c
2997
printk(" CPU0\n");
kernel/locking/lockdep.c
2998
printk(" ----\n");
kernel/locking/lockdep.c
2999
printk(" lock(");
kernel/locking/lockdep.c
3001
printk(KERN_CONT ");\n");
kernel/locking/lockdep.c
3002
printk(" lock(");
kernel/locking/lockdep.c
3004
printk(KERN_CONT ");\n");
kernel/locking/lockdep.c
3005
printk("\n *** DEADLOCK ***\n\n");
kernel/locking/lockdep.c
3006
printk(" May be due to missing lock nesting notation\n\n");
kernel/locking/lockdep.c
3594
printk(" hlock_id:%d -> chain_key:%016Lx",
kernel/locking/lockdep.c
3608
printk("depth: %u (irq_context %u)\n", depth - i + 1,
kernel/locking/lockdep.c
3627
printk("depth: %u\n", chain->depth);
kernel/locking/lockdep.c
3633
printk("\n");
kernel/locking/lockdep.c
3829
printk("\nhash chain already cached, key: "
kernel/locking/lockdep.c
3839
printk("\nnew hash chain, key: %016Lx tail class: [%px] %s\n",
kernel/locking/lockdep.c
3993
printk(" Possible unsafe locking scenario:\n\n");
kernel/locking/lockdep.c
3994
printk(" CPU0\n");
kernel/locking/lockdep.c
3995
printk(" ----\n");
kernel/locking/lockdep.c
3996
printk(" lock(");
kernel/locking/lockdep.c
3998
printk(KERN_CONT ");\n");
kernel/locking/lockdep.c
3999
printk(" <Interrupt>\n");
kernel/locking/lockdep.c
4000
printk(" lock(");
kernel/locking/lockdep.c
4002
printk(KERN_CONT ");\n");
kernel/locking/lockdep.c
4003
printk("\n *** DEADLOCK ***\n\n");
kernel/locking/lockdep.c
4206
printk("irq event stamp: %u\n", trace->irq_events);
kernel/locking/lockdep.c
4207
printk("hardirqs last enabled at (%u): [<%px>] %pS\n",
kernel/locking/lockdep.c
4210
printk("hardirqs last disabled at (%u): [<%px>] %pS\n",
kernel/locking/lockdep.c
4213
printk("softirqs last enabled at (%u): [<%px>] %pS\n",
kernel/locking/lockdep.c
4216
printk("softirqs last disabled at (%u): [<%px>] %pS\n",
kernel/locking/lockdep.c
4766
printk("\nmarked lock as {%s}:\n", usage_str[new_bit]);
kernel/locking/lockdep.c
4975
printk(KERN_ERR "BUG: key %px has not been registered!\n", key);
kernel/locking/lockdep.c
5121
printk("\nacquire class [%px] %s", class->key, class->name);
kernel/locking/lockdep.c
5123
printk(KERN_CONT "#%d", class->name_version);
kernel/locking/lockdep.c
5124
printk(KERN_CONT "\n");
kernel/locking/lockdep.c
524
printk(KERN_DEBUG "%s\n", bug_msg);
kernel/locking/lockdep.c
525
printk(KERN_DEBUG "turning off the locking correctness validator.\n");
kernel/locking/lockdep.c
5255
printk(KERN_DEBUG "depth: %i max: %lu!\n",
kernel/locking/lockdep.c
527
printk(KERN_DEBUG "Please attach the output of /proc/lock_stat to the bug report\n");
kernel/locking/lockdep.c
5701
printk("possible reason: unannotated irqs-off.\n");
kernel/locking/lockdep.c
5705
printk("possible reason: unannotated irqs-on.\n");
kernel/locking/lockdep.c
6798
printk("INFO: lockdep is turned off.\n");
kernel/locking/lockdep.c
725
printk(KERN_CONT "%s", name);
kernel/locking/lockdep.c
727
printk(KERN_CONT "%s", name);
kernel/locking/lockdep.c
729
printk(KERN_CONT "#%d", class->name_version);
kernel/locking/lockdep.c
731
printk(KERN_CONT "/%d", class->subclass);
kernel/locking/lockdep.c
743
printk(KERN_CONT " (");
kernel/locking/lockdep.c
745
printk(KERN_CONT "){%s}-{%d:%d}", usage,
kernel/locking/lockdep.c
759
printk(KERN_CONT "%s", name);
kernel/locking/lockdep.c
777
printk(KERN_CONT "<RELEASED>\n");
kernel/locking/lockdep.c
781
printk(KERN_CONT "%px", hlock->instance);
kernel/locking/lockdep.c
783
printk(KERN_CONT ", at: %pS\n", (void *)hlock->acquire_ip);
kernel/locking/lockdep.c
791
printk("no locks held by %s/%d.\n", p->comm, task_pid_nr(p));
kernel/locking/lockdep.c
793
printk("%d lock%s held by %s/%d:\n", depth,
kernel/locking/lockdep.c
802
printk(" #%d: ", i);
kernel/locking/lockdep.c
809
printk("%s %.*s %s\n", init_utsname()->release,
kernel/locking/lockdep.c
897
printk(KERN_ERR
kernel/locking/lockdep.c
899
printk(KERN_ERR
kernel/locking/rtmutex.c
721
printk(KERN_WARNING "Maximum lock depth %d reached "
kernel/locking/spinlock_debug.c
151
printk(KERN_EMERG "BUG: rwlock %s on CPU#%d, %s/%d, %p\n",
kernel/locking/spinlock_debug.c
61
printk(KERN_EMERG "BUG: spinlock %s on CPU#%d, %s/%d\n",
kernel/locking/spinlock_debug.c
64
printk(KERN_EMERG " lock: %pS, .magic: %08x, .owner: %s/%d, "
kernel/module/main.c
3963
printk(KERN_DEFAULT "Modules linked in:");
kernel/module/tracking.c
53
printk(KERN_DEFAULT "Unloaded tainted modules:");
kernel/params.c
953
printk(KERN_WARNING "%s (%d): error creating kset\n",
kernel/power/suspend_test.c
103
printk(info_test, pm_states[state]);
kernel/power/suspend_test.c
109
printk(info_test, pm_states[state]);
kernel/power/suspend_test.c
114
printk(err_suspend, status);
kernel/power/suspend_test.c
174
printk(warn_bad_state, suspend_type);
kernel/power/suspend_test.c
199
printk(warn_bad_state, test_state_label);
kernel/power/suspend_test.c
210
printk(warn_no_rtc);
kernel/power/suspend_test.c
81
printk(err_readtime, dev_name(&rtc->dev), status);
kernel/power/suspend_test.c
92
printk(err_wakealarm, dev_name(&rtc->dev), status);
kernel/power/suspend_test.c
97
printk(info_test, pm_states[state]);
kernel/printk/internal.h
18
printk(lvl pr_fmt("%s%sconsole [%s%d] " fmt), \
kernel/resource.c
261
printk(KERN_DEBUG "release child resource %pR\n", tmp);
kernel/sched/autogroup.c
124
printk(KERN_WARNING "autogroup_create: %s failure.\n",
kernel/sched/clock.c
136
printk(KERN_INFO "sched_clock: Marking stable (%lld, %lld)->(%lld, %lld)\n",
kernel/sched/clock.c
171
printk(KERN_WARNING "TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.\n");
kernel/sched/clock.c
172
printk(KERN_INFO "sched_clock: Marking unstable (%lld, %lld)<-(%lld, %lld)\n",
kernel/sched/core.c
6050
printk(KERN_ERR "BUG: scheduling while atomic: %s/%d/0x%08x\n",
kernel/sched/core.c
6082
printk(KERN_ERR "BUG: scheduling in a non-blocking section: %s/%d/%i\n",
kernel/sched/core.c
8820
printk("%sCPU%d enqueued tasks (%u total):\n", loglvl, cpu, rq->nr_running);
kernel/sched/core.c
8828
printk("%s\tpid: %d, name: %s\n", loglvl, p->pid, p->comm);
kernel/sched/core.c
9219
printk(KERN_ERR "BUG: assuming atomic context at %s:%d\n", file, line);
kernel/sched/core.c
9220
printk(KERN_ERR "in_atomic(): %d, irqs_disabled(): %d, pid: %d, name: %s\n",
kernel/sched/ext/ext.c
8468
printk("%sSched_ext: %s (%s%s)", log_lvl, sch->ops.name,
kernel/sched/ext/ext.c
8479
printk("%sSched_ext: %s (%s%s), task: runnable_at=%s",
kernel/sched/idle.c
518
printk(KERN_ERR "bad: scheduling from the idle thread!\n");
kernel/sched/topology.c
104
printk(KERN_CONT " %d:{ span=%*pbl",
kernel/sched/topology.c
110
printk(KERN_CONT " mask=%*pbl",
kernel/sched/topology.c
115
printk(KERN_CONT " cap=%lu", group->sgc->capacity);
kernel/sched/topology.c
120
printk(KERN_ERR "ERROR: domain->groups does not match domain->child\n");
kernel/sched/topology.c
123
printk(KERN_CONT " }");
kernel/sched/topology.c
128
printk(KERN_CONT ",");
kernel/sched/topology.c
131
printk(KERN_CONT "\n");
kernel/sched/topology.c
134
printk(KERN_ERR "ERROR: groups don't span domain->span\n");
kernel/sched/topology.c
138
printk(KERN_ERR "ERROR: parent span is not a superset of domain->span\n");
kernel/sched/topology.c
150
printk(KERN_DEBUG "CPU%d attaching NULL sched-domain.\n", cpu);
kernel/sched/topology.c
154
printk(KERN_DEBUG "CPU%d attaching sched-domain(s):\n", cpu);
kernel/sched/topology.c
2142
printk(KERN_WARNING "ERROR: %s\n\n", str);
kernel/sched/topology.c
2145
printk(KERN_WARNING " ");
kernel/sched/topology.c
2148
printk(KERN_CONT "(%02d) ", node_distance(i,j));
kernel/sched/topology.c
2150
printk(KERN_CONT " %02d ", node_distance(i,j));
kernel/sched/topology.c
2152
printk(KERN_CONT "\n");
kernel/sched/topology.c
2154
printk(KERN_WARNING "\n");
kernel/sched/topology.c
369
printk(KERN_DEBUG "root_domain %*pbl:", cpumask_pr_args(cpu_map));
kernel/sched/topology.c
372
printk(KERN_CONT " pd%d:{ cpus=%*pbl nr_pstate=%d }",
kernel/sched/topology.c
379
printk(KERN_CONT "\n");
kernel/sched/topology.c
55
printk(KERN_DEBUG "%*s domain-%d: ", level, "", level);
kernel/sched/topology.c
56
printk(KERN_CONT "span=%*pbl level=%s\n",
kernel/sched/topology.c
60
printk(KERN_ERR "ERROR: domain->span does not contain CPU%d\n", cpu);
kernel/sched/topology.c
63
printk(KERN_ERR "ERROR: domain->groups does not contain CPU%d\n", cpu);
kernel/sched/topology.c
72
printk(KERN_ERR "ERROR: flag %s set here but not in child\n",
kernel/sched/topology.c
77
printk(KERN_ERR "ERROR: flag %s set here but not in parent\n",
kernel/sched/topology.c
81
printk(KERN_DEBUG "%*s groups:", level + 1, "");
kernel/sched/topology.c
84
printk("\n");
kernel/sched/topology.c
85
printk(KERN_ERR "ERROR: group is NULL\n");
kernel/sched/topology.c
90
printk(KERN_CONT "\n");
kernel/sched/topology.c
91
printk(KERN_ERR "ERROR: empty group\n");
kernel/sched/topology.c
97
printk(KERN_CONT "\n");
kernel/sched/topology.c
98
printk(KERN_ERR "ERROR: repeated CPUs\n");
kernel/stacktrace.c
33
printk("%*c%pS\n", 1 + spaces, ' ', (void *)entries[i]);
kernel/stop_machine.c
63
printk("%sStopper: %pS <- %pS\n", log_lvl, stopper->fn, (void *)stopper->caller);
kernel/trace/ftrace.c
2181
printk(KERN_CONT "%s[FAULT] %px\n", fmt, p);
kernel/trace/ftrace.c
2185
printk(KERN_CONT "%s", fmt);
kernel/trace/ftrace.c
6934
printk(KERN_DEBUG "ftrace: function %s not "
kernel/trace/ftrace.c
8498
printk("ftrace ops had %pS for function\n",
kernel/trace/trace.c
1340
printk(KERN_CONT "FAILED!\n");
kernel/trace/trace.c
1359
printk(KERN_CONT "PASSED\n");
kernel/trace/trace.c
1517
printk(KERN_INFO "Starting tracer '%s'\n", type->name);
kernel/trace/trace.c
1974
printk("%s", iter->seq.buffer);
kernel/trace/trace.c
9320
printk(KERN_TRACE "%s", s->buffer);
kernel/trace/trace.c
9392
printk(KERN_TRACE "Dumping ftrace buffer:\n");
kernel/trace/trace.c
9394
printk(KERN_TRACE "Dumping ftrace instance %s buffer:\n", tr->name);
kernel/trace/trace.c
9398
printk("# WARNING: FUNCTION TRACING IS CORRUPTED\n");
kernel/trace/trace.c
9399
printk("# MAY BE MISSING FUNCTION EVENTS\n");
kernel/trace/trace.c
9412
printk(KERN_TRACE "---------------------------------\n");
kernel/trace/trace.c
9432
printk(KERN_TRACE " (ftrace buffer empty)\n");
kernel/trace/trace.c
9434
printk(KERN_TRACE "---------------------------------\n");
kernel/trace/trace.c
9471
printk(KERN_TRACE "Instance %s not found\n", inst_name);
kernel/trace/trace.c
9506
printk(KERN_TRACE "Bad dumping mode, switching to all CPUs dump\n");
kernel/trace/trace.c
9975
printk(KERN_INFO "ftrace bootup tracer '%s' not registered.\n",
kernel/trace/trace.c
9990
printk(KERN_WARNING
kernel/trace/trace.h
116
#define FTRACE_ENTRY_DUP(name, name_struct, id, tstruct, printk)
kernel/trace/trace_events_filter.c
2828
printk(KERN_INFO "\npred visited %s\n", field->name);
kernel/trace/trace_events_filter.c
2860
printk(KERN_INFO "Testing ftrace filter: ");
kernel/trace/trace_events_filter.c
2870
printk(KERN_INFO
kernel/trace/trace_events_filter.c
2896
printk(KERN_INFO
kernel/trace/trace_events_filter.c
2903
printk(KERN_INFO
kernel/trace/trace_events_filter.c
2911
printk(KERN_CONT "OK\n");
kernel/trace/trace_export.c
82
printk(print); \
kernel/trace/trace_irqsoff.c
600
printk(KERN_ERR "failed to start irqsoff tracer\n");
kernel/trace/trace_nop.c
71
printk(KERN_DEBUG "nop_test_accept flag set to %d: we accept."
kernel/trace/trace_nop.c
78
printk(KERN_DEBUG "nop_test_refuse flag set to %d: we refuse."
kernel/trace/trace_sched_wakeup.c
656
printk(KERN_ERR "failed to start wakeup tracer\n");
kernel/trace/trace_selftest.c
100
printk(KERN_WARNING "Failed to init %s tracer, init returned %d\n",
kernel/trace/trace_selftest.c
1036
printk(KERN_WARNING "BUG: Function graph tracer hang!\n");
kernel/trace/trace_selftest.c
1071
printk(KERN_CONT " ... kernel command line filter set: force PASS ... ");
kernel/trace/trace_selftest.c
1111
printk(KERN_CONT ".. no entries found ..");
kernel/trace/trace_selftest.c
1233
printk(KERN_CONT ".. no entries found ..");
kernel/trace/trace_selftest.c
1260
printk(KERN_CONT "can not test ... force ");
kernel/trace/trace_selftest.c
1295
printk(KERN_CONT ".. no entries found ..");
kernel/trace/trace_selftest.c
1322
printk(KERN_CONT "can not test ... force ");
kernel/trace/trace_selftest.c
1363
printk(KERN_CONT ".. no entries found ..");
kernel/trace/trace_selftest.c
1391
printk(KERN_CONT ".. no entries found ..");
kernel/trace/trace_selftest.c
1475
printk(KERN_CONT "Failed to create ftrace wakeup test thread ");
kernel/trace/trace_selftest.c
1528
printk(KERN_CONT ".. no entries found ..");
kernel/trace/trace_selftest.c
1560
printk(KERN_CONT ".. no entries found ..");
kernel/trace/trace_selftest.c
166
printk("(%d %d %d %d %d) ",
kernel/trace/trace_selftest.c
193
printk(KERN_CONT "PASSED\n");
kernel/trace/trace_selftest.c
253
printk("MEMORY ERROR ");
kernel/trace/trace_selftest.c
367
printk(KERN_CONT "PASSED\n");
kernel/trace/trace_selftest.c
403
printk(KERN_CONT ".. filter did not filter .. ");
kernel/trace/trace_selftest.c
42
printk(KERN_CONT ".. bad ring buffer ");
kernel/trace/trace_selftest.c
426
printk(KERN_CONT ".. filter failed count=%ld ..", count);
kernel/trace/trace_selftest.c
46
printk(KERN_CONT ".. invalid entry %d ",
kernel/trace/trace_selftest.c
56
printk(KERN_CONT ".. corrupted trace buffer .. ");
kernel/trace/trace_selftest.c
700
printk(KERN_CONT " ... kernel command line filter set: force PASS ... ");
kernel/trace/trace_selftest.c
731
printk(KERN_CONT ".. no entries found ..");
kernel/tracepoint.c
139
printk(KERN_DEBUG "Probe %d : %pSb\n", i, funcs[i].func);
kernel/watchdog.c
530
printk(KERN_CRIT "CPU#%d Utilization every %llums during lockup:\n",
kernel/watchdog.c
535
printk(KERN_CRIT "\t#%d: %3u%% system,\t%3u%% softirq,\t"
kernel/watchdog.c
611
printk(KERN_CRIT "CPU#%d Detect HardIRQ Time exceeds %d%%. Most frequent HardIRQs:\n",
kernel/watchdog.c
618
printk(KERN_CRIT "\t#%u: %-10u\tirq#%d\n",
kernel/workqueue.c
6355
printk("%sWorkqueue: %s %ps", log_lvl, name, fn);
lib/bch.c
1293
printk(KERN_ERR "bch encoder/decoder was configured to support "
lib/cpumask.c
34
printk(KERN_ERR "=> alloc_cpumask_var: failed!\n");
lib/crypto/mpi/mpi-internal.h
27
#define log_debug printk
lib/crypto/mpi/mpi-internal.h
28
#define log_bug printk
lib/dump_stack.c
57
printk("%sCPU: %d UID: %u PID: %d Comm: %.20s %s%s %s %.*s %s " BUILD_ID_FMT "\n",
lib/dump_stack.c
68
printk("%s%s\n", log_lvl, print_tainted_verbose());
lib/dump_stack.c
71
printk("%sHardware name: %s\n",
lib/dynamic_debug.c
879
printk(KERN_DEBUG "%s%pV", dynamic_emit_prefix(descriptor, buf), &vaf);
lib/dynamic_debug.c
900
printk(KERN_DEBUG "(NULL device *): %pV", &vaf);
lib/dynamic_debug.c
941
printk(KERN_DEBUG "%s%s: %pV", netdev_name(dev),
lib/dynamic_debug.c
944
printk(KERN_DEBUG "(NULL net_device): %pV", &vaf);
lib/dynamic_debug.c
977
printk(KERN_DEBUG "%s: %pV", dev_name(&ibdev->dev), &vaf);
lib/dynamic_debug.c
979
printk(KERN_DEBUG "(NULL ib_device): %pV", &vaf);
lib/fault-inject.c
47
printk(KERN_WARNING
lib/fault-inject.c
66
printk(KERN_NOTICE "FAULT_INJECTION: forcing a failure.\n"
lib/hexdump.c
282
printk("%s%s%p: %s\n",
lib/hexdump.c
286
printk("%s%s%.8x: %s\n", level, prefix_str, i, linebuf);
lib/hexdump.c
289
printk("%s%s%s\n", level, prefix_str, linebuf);
lib/interval_tree_test.c
122
printk(" -> %llu cycles (%lu results)\n",
lib/interval_tree_test.c
139
printk(KERN_ALERT "interval tree iteration\n");
lib/interval_tree_test.c
251
printk(KERN_ALERT "interval tree span iteration\n");
lib/interval_tree_test.c
361
printk(KERN_ALERT "test exit\n");
lib/interval_tree_test.c
71
printk(KERN_ALERT "interval tree insert/remove");
lib/interval_tree_test.c
88
printk(" -> %llu cycles\n", (unsigned long long)time);
lib/interval_tree_test.c
99
printk(KERN_ALERT "interval tree search");
lib/locking-selftest.c
1501
printk("%33s:", testname);
lib/locking-selftest.c
2284
printk(" --------------------------------------------------------------------------\n");
lib/locking-selftest.c
2285
printk(" | Wound/wait tests |\n");
lib/locking-selftest.c
2286
printk(" ---------------------\n");
lib/locking-selftest.c
2333
printk(" -----------------------------------------------------\n");
lib/locking-selftest.c
2334
printk(" |block | try |context|\n");
lib/locking-selftest.c
2335
printk(" -----------------------------------------------------\n");
lib/locking-selftest.c
2448
printk(" --------------------------------------------------------------------------\n");
lib/locking-selftest.c
2449
printk(" | queued read lock tests |\n");
lib/locking-selftest.c
2450
printk(" ---------------------------\n");
lib/locking-selftest.c
2491
printk(" --------------------\n");
lib/locking-selftest.c
2492
printk(" | fs_reclaim tests |\n");
lib/locking-selftest.c
2493
printk(" --------------------\n");
lib/locking-selftest.c
2604
printk(" --------------------------------------------------------------------------\n");
lib/locking-selftest.c
2605
printk(" | wait context tests |\n");
lib/locking-selftest.c
2606
printk(" --------------------------------------------------------------------------\n");
lib/locking-selftest.c
2607
printk(" | rcu | raw | spin |mutex |\n");
lib/locking-selftest.c
2608
printk(" --------------------------------------------------------------------------\n");
lib/locking-selftest.c
2740
printk(" --------------------------------------------------------------------------\n");
lib/locking-selftest.c
2741
printk(" | lockdep_set_subclass() name test|\n");
lib/locking-selftest.c
2742
printk(" -----------------------------------\n");
lib/locking-selftest.c
2751
printk(" --------------------------------------------------------------------------\n");
lib/locking-selftest.c
2752
printk(" | local_lock tests |\n");
lib/locking-selftest.c
2753
printk(" ---------------------\n");
lib/locking-selftest.c
2834
printk("----------------------------------\n");
lib/locking-selftest.c
2835
printk("| Locking API testsuite disabled |\n");
lib/locking-selftest.c
2836
printk("----------------------------------\n");
lib/locking-selftest.c
2848
printk("------------------------\n");
lib/locking-selftest.c
2849
printk("| Locking API testsuite:\n");
lib/locking-selftest.c
2850
printk("----------------------------------------------------------------------------\n");
lib/locking-selftest.c
2851
printk(" | spin |wlock |rlock |mutex | wsem | rsem |rtmutex\n");
lib/locking-selftest.c
2852
printk(" --------------------------------------------------------------------------\n");
lib/locking-selftest.c
2867
printk(" --------------------------------------------------------------------------\n");
lib/locking-selftest.c
2923
printk(" --------------------------------------------------------------------------\n");
lib/locking-selftest.c
2962
printk("-----------------------------------------------------------------\n");
lib/locking-selftest.c
2964
printk("BUG: %3d unexpected failures (out of %3d) - debugging disabled! |\n",
lib/locking-selftest.c
2966
printk("-----------------------------------------------------------------\n");
lib/locking-selftest.c
2968
printk("--------------------------------------------------------\n");
lib/locking-selftest.c
2969
printk("%3d out of %3d testcases failed, as expected. |\n",
lib/locking-selftest.c
2971
printk("----------------------------------------------------\n");
lib/locking-selftest.c
2974
printk("--------------------------------------------------------\n");
lib/locking-selftest.c
2975
printk("All %3d testcases failed, as expected. |\n",
lib/locking-selftest.c
2977
printk("----------------------------------------\n");
lib/locking-selftest.c
2980
printk("-------------------------------------------------------\n");
lib/locking-selftest.c
2981
printk("Good, all %3d testcases passed! |\n",
lib/locking-selftest.c
2983
printk("---------------------------------\n");
lib/lwq.c
107
printk(KERN_INFO "testing lwq....\n");
lib/lwq.c
109
printk(KERN_INFO " lwq: run some threads\n");
lib/lwq.c
125
printk(KERN_INFO " lwq: dequeue first 50:");
lib/lwq.c
128
printk(KERN_CONT "\n");
lib/lwq.c
129
printk(KERN_INFO " lwq: ... ");
lib/lwq.c
133
printk(KERN_CONT " %d(%d)", t->i, t->c);
lib/lwq.c
136
printk(KERN_CONT "\n");
lib/lwq.c
138
printk(KERN_INFO " lwq: delete the multiples of 3 (test lwq_for_each_safe())\n");
lib/lwq.c
148
printk(KERN_INFO " lwq: dequeue remaining:");
lib/lwq.c
150
printk(KERN_CONT " %d", t->i);
lib/lwq.c
153
printk(KERN_CONT "\n");
lib/plist.c
247
printk(KERN_DEBUG "start plist test\n");
lib/plist.c
279
printk(KERN_DEBUG "end plist test\n");
lib/rbtree_test.c
249
printk(KERN_ALERT "rbtree testing");
lib/rbtree_test.c
266
printk(" -> test 1 (latency of nnodes insert+delete): %llu cycles\n",
lib/rbtree_test.c
282
printk(" -> test 2 (latency of nnodes cached insert+delete): %llu cycles\n",
lib/rbtree_test.c
299
printk(" -> test 3 (latency of inorder traversal): %llu cycles\n",
lib/rbtree_test.c
311
printk(" -> test 4 (latency to fetch first node)\n");
lib/rbtree_test.c
312
printk(" non-cached: %llu cycles\n", (unsigned long long)time);
lib/rbtree_test.c
323
printk(" cached: %llu cycles\n", (unsigned long long)time);
lib/rbtree_test.c
350
printk(KERN_ALERT "augmented rbtree testing");
lib/rbtree_test.c
367
printk(" -> test 1 (latency of nnodes insert+delete): %llu cycles\n", (unsigned long long)time);
lib/rbtree_test.c
382
printk(" -> test 2 (latency of nnodes cached insert+delete): %llu cycles\n", (unsigned long long)time);
lib/rbtree_test.c
418
printk(KERN_ALERT "test exit\n");
lib/seq_buf.c
126
printk("%s%.*s", lvl, len, start);
lib/seq_buf.c
132
printk("%s%s\n", lvl, start);
lib/sg_pool.c
153
printk(KERN_ERR "SG_POOL: can't init sg slab %s\n",
lib/sg_pool.c
161
printk(KERN_ERR "SG_POOL: can't init sg mempool %s\n",
lib/smp_processor_id.c
43
printk(KERN_ERR "BUG: using %s%s() in preemptible [%08x] code: %s/%d\n",
lib/smp_processor_id.c
46
printk("caller is %pS\n", __builtin_return_address(0));
lib/test_bitmap.c
724
printk("set not equal %d %d\n", start, nbits);
lib/test_bitmap.c
728
printk("set not __equal %d %d\n", start, nbits);
lib/test_bitmap.c
735
printk("clear not equal %d %d\n", start, nbits);
lib/test_bitmap.c
739
printk("clear not __equal %d %d\n", start,
lib/test_ida.c
160
printk("vvv Ignore \"not allocated\" warnings\n");
lib/test_ida.c
183
printk("^^^ \"not allocated\" warnings over\n");
lib/test_ida.c
276
printk("IDA: %u of %u tests passed\n", tests_passed, tests_run);
lib/test_rhashtable.c
513
printk(KERN_ERR "\n---- ht: ----%s\n-------------\n", buff);
lib/test_xarray.c
2266
printk("XArray: %u of %u tests passed\n", tests_passed, tests_run);
lib/test_xarray.c
26
printk("BUG at %s:%d\n", __func__, __LINE__); \
lib/ts_bm.c
45
#define DEBUGP printk
lib/xz/xz_dec_test.c
108
printk(KERN_INFO DEVICE_NAME ": %zu bytes of "
lib/xz/xz_dec_test.c
115
printk(KERN_INFO DEVICE_NAME ": decoding %zu bytes of input\n",
lib/xz/xz_dec_test.c
138
printk(KERN_INFO DEVICE_NAME ": XZ_OK\n");
lib/xz/xz_dec_test.c
142
printk(KERN_INFO DEVICE_NAME ": XZ_STREAM_END, "
lib/xz/xz_dec_test.c
147
printk(KERN_INFO DEVICE_NAME ": XZ_MEMLIMIT_ERROR\n");
lib/xz/xz_dec_test.c
151
printk(KERN_INFO DEVICE_NAME ": XZ_FORMAT_ERROR\n");
lib/xz/xz_dec_test.c
155
printk(KERN_INFO DEVICE_NAME ": XZ_OPTIONS_ERROR\n");
lib/xz/xz_dec_test.c
159
printk(KERN_INFO DEVICE_NAME ": XZ_DATA_ERROR\n");
lib/xz/xz_dec_test.c
163
printk(KERN_INFO DEVICE_NAME ": XZ_BUF_ERROR\n");
lib/xz/xz_dec_test.c
167
printk(KERN_INFO DEVICE_NAME ": Bug detected!\n");
lib/xz/xz_dec_test.c
194
printk(KERN_INFO DEVICE_NAME ": module loaded\n");
lib/xz/xz_dec_test.c
195
printk(KERN_INFO DEVICE_NAME ": Create a device node with "
lib/xz/xz_dec_test.c
205
printk(KERN_INFO DEVICE_NAME ": module unloaded\n");
lib/xz/xz_dec_test.c
78
printk(KERN_INFO DEVICE_NAME ": opened\n");
lib/xz/xz_dec_test.c
87
printk(KERN_INFO DEVICE_NAME ": input was truncated\n");
lib/xz/xz_dec_test.c
89
printk(KERN_INFO DEVICE_NAME ": closed\n");
mm/dmapool_test.c
116
printk("%s: register failed:%d\n", __func__, ret);
mm/dmapool_test.c
125
printk("%s: mask failed:%d\n", __func__, ret);
mm/dmapool_test.c
91
printk("dmapool test: size:%-4zu align:%-4zu blocks:%-4d time:%llu\n",
mm/hugetlb.c
4571
printk("Node %d hugepages_total=%u hugepages_free=%u hugepages_surp=%u hugepages_size=%lukB\n",
mm/internal.h
1354
printk(KERN_DEBUG "mminit::" prefix " " fmt, ##arg); \
mm/memory.c
7278
printk("%s%pD[%lx,%lx+%lx]", prefix, f, ip,
mm/mm_init.c
96
printk(KERN_DEBUG "mminit::zonelist %s %d:%s = ",
mm/numa_emulation.c
75
printk(KERN_INFO "Faking node %d at [mem %#018Lx-%#018Lx] (%LuMB)\n",
mm/percpu.c
2482
printk("%spcpu-alloc: s%zu r%zu d%zu u%zu alloc=%zu*%zu",
mm/percpu.c
2495
printk("%spcpu-alloc: ", lvl);
mm/show_mem.c
159
printk(KERN_CONT "(%s) ", tmp);
mm/show_mem.c
197
printk("active_anon:%lu inactive_anon:%lu isolated_anon:%lu\n"
mm/show_mem.c
232
printk("Node %d"
mm/show_mem.c
29
printk("Node %d ", zone_to_nid(zone));
mm/show_mem.c
302
printk(KERN_CONT
mm/show_mem.c
352
printk("lowmem_reserve[]:");
mm/show_mem.c
354
printk(KERN_CONT " %ld", zone->lowmem_reserve[i]);
mm/show_mem.c
355
printk(KERN_CONT "\n");
mm/show_mem.c
368
printk(KERN_CONT "%s: ", zone->name);
mm/show_mem.c
386
printk(KERN_CONT "%lu*%lukB ",
mm/show_mem.c
391
printk(KERN_CONT "= %lukB\n", K(total));
mm/show_mem.c
400
printk("%ld total pagecache pages\n", global_node_page_state(NR_FILE_PAGES));
mm/show_mem.c
410
printk("Mem-Info:\n");
mm/show_mem.c
422
printk("%lu pages RAM\n", total);
mm/show_mem.c
423
printk("%lu pages HighMem/MovableOnly\n", highmem);
mm/show_mem.c
424
printk("%lu pages reserved\n", reserved);
mm/show_mem.c
426
printk("%lu pages cma reserved\n", totalcma_pages);
mm/show_mem.c
429
printk("%lu pages hwpoisoned\n", atomic_long_read(&num_poisoned_pages));
mm/swap_state.c
70
printk("%lu pages in swap cache\n", total_swapcache_pages());
mm/swap_state.c
71
printk("Free swap = %ldkB\n", K(get_nr_swap_pages()));
mm/swap_state.c
72
printk("Total swap = %lukB\n", K(total_swap_pages));
net/802/psnap.c
102
printk(snap_err_msg);
net/atm/common.c
80
printk(KERN_DEBUG "%s: rmem leakage (%d bytes) detected.\n",
net/atm/common.c
84
printk(KERN_DEBUG "%s: wmem leakage (%d bytes) detected.\n",
net/bluetooth/lib.c
329
printk(KERN_DEBUG pr_fmt("%pV"), &vaf);
net/bluetooth/smp.c
43
#define SMP_DBG(fmt, ...) printk(KERN_DEBUG "%s: " fmt, __func__, \
net/bridge/br_netfilter_hooks.c
1321
printk(KERN_NOTICE "Bridge firewalling registered\n");
net/bridge/br_private.h
641
printk(level "%s: " format, (br)->dev->name, ##args)
net/bridge/netfilter/ebt_log.c
86
printk(KERN_SOH "%c%s IN=%s OUT=%s MAC source = %pM MAC dest = %pM proto = 0x%04x",
net/can/bcm.c
2190
printk(KERN_ERR "can: registration of bcm protocol failed\n");
net/can/bcm.c
973
printk(KERN_ERR "can-bcm: bcm_rx_unreg: registered device "
net/can/proc.c
107
printk(KERN_ERR "can: calc_rate: count exceeded! %ld\n",
net/can/proc.c
445
printk(KERN_INFO "can: failed to create /proc/net/can . "
net/ceph/messenger.c
287
printk("%s: unexpected old state %d\n", __func__, old_state);
net/ceph/messenger.c
298
printk("%s: unexpected old state %d\n", __func__, old_state);
net/ceph/messenger.c
309
printk("%s: unexpected old state %d\n", __func__, old_state);
net/ceph/messenger.c
322
printk("%s: unexpected old state %d\n", __func__, old_state);
net/ceph/messenger.c
336
printk("%s: unexpected old state %d\n", __func__, old_state);
net/ceph/osdmap.c
24
printk(KERN_INFO "%s (%pU e%u): %pV", KBUILD_MODNAME, &map->fsid,
net/core/dev.c
12972
printk("%s%s%s: %pV",
net/core/dev.c
12975
printk("%s(NULL net_device): %pV", level, vaf);
net/core/neighbour.c
313
printk("NEIGH: BUG, double timer add, state is %x\n",
net/core/skbuff.c
1325
printk("%sskb len=%u data_len=%u headroom=%u headlen=%u tailroom=%u\n"
net/core/skbuff.c
1351
printk("%sdev name=%s feat=%pNF\n",
net/core/skbuff.c
1354
printk("%ssk family=%hu type=%u proto=%u\n",
net/core/skbuff.c
1378
printk("%sskb frag %d: not readable\n", level, i);
net/core/skbuff.c
1401
printk("skb fraglist:\n");
net/dns_resolver/internal.h
34
printk(KERN_DEBUG "[%-6.6s] "FMT"\n", \
net/ipv4/ipconfig.c
885
printk("E");
net/ipv4/ipconfig.c
890
printk("E");
net/llc/af_llc.c
1260
printk(llc_proc_err_msg);
net/llc/af_llc.c
1265
printk(llc_sysctl_err_msg);
net/llc/af_llc.c
1270
printk(llc_sock_err_msg);
net/llc/af_llc.c
43
#define dprintk(args...) printk(KERN_DEBUG args)
net/llc/llc_c_ac.c
1437
printk(KERN_WARNING "%s: timer called on closed connection\n",
net/llc/llc_c_ev.c
39
#define dprintk(args...) printk(KERN_DEBUG args)
net/llc/llc_conn.c
114
printk(KERN_INFO "%s: received a reset ind!\n", __func__);
net/llc/llc_conn.c
118
printk(KERN_INFO "%s: received unknown %d prim!\n",
net/llc/llc_conn.c
158
printk(KERN_INFO "%s: received a reset conf!\n", __func__);
net/llc/llc_conn.c
162
printk(KERN_INFO "%s: received unknown %d prim!\n",
net/llc/llc_conn.c
22
#define dprintk(args...) printk(KERN_DEBUG args)
net/llc/llc_conn.c
68
printk(KERN_ERR "%s: llc_conn_service failed\n", __func__);
net/llc/llc_conn.c
80
printk(KERN_ERR "%s: sock_queue_rcv_skb failed!\n",
net/llc/llc_conn.c
868
printk(KERN_ERR "%s: invalid skb in backlog\n", __func__);
net/llc/llc_conn.c
933
printk(KERN_DEBUG "LLC socket %p created in %s, now we have %d alive\n", sk,
net/llc/llc_conn.c
974
printk(KERN_INFO "%s: unackq=%d, txq=%d\n", __func__,
net/llc/llc_conn.c
983
printk(KERN_DEBUG "Destruction of LLC sock %p delayed in %s, cnt=%d\n",
net/llc/llc_conn.c
985
printk(KERN_DEBUG "%d LLC sockets are still alive\n",
net/llc/llc_conn.c
989
printk(KERN_DEBUG "LLC socket %p released in %s, %d are still alive\n", sk,
net/llc/llc_input.c
17
#define dprintk(args...) printk(KERN_DEBUG args)
net/netfilter/nf_conntrack_h323_asn1.c
25
#define PRINT printk
net/netfilter/nf_log.c
336
printk("%s\n", m->buf);
net/netfilter/nfnetlink_log.c
58
printk(x, ## args); } while (0);
net/netlabel/netlabel_kapi.c
1528
printk(KERN_INFO "NetLabel: Initializing\n");
net/netlabel/netlabel_kapi.c
1529
printk(KERN_INFO "NetLabel: domain hash size = %u\n",
net/netlabel/netlabel_kapi.c
1531
printk(KERN_INFO "NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO\n");
net/netlabel/netlabel_kapi.c
1548
printk(KERN_INFO "NetLabel: unlabeled traffic allowed by default\n");
net/netlink/af_netlink.c
399
printk(KERN_ERR "Freeing alive netlink socket %p\n", sk);
net/phonet/af_phonet.c
508
printk(KERN_ALERT
net/phonet/pep-gprs.c
286
printk(KERN_DEBUG"%s: attached\n", dev->name);
net/phonet/pep-gprs.c
307
printk(KERN_DEBUG"%s: detached\n", dev->name);
net/rds/ib_cm.c
148
printk(KERN_ERR "rds_ib_update_ipaddr failed (%d)\n",
net/rds/ib_cm.c
714
printk(KERN_NOTICE "RDS incoming connection has no private data, "
net/rds/ib_recv.c
403
printk(KERN_NOTICE "Argh - ring alloc returned pos=%u\n",
net/rds/ib_send.c
1020
printk(KERN_WARNING "RDS/IB: rdma ib_post_send to %pI6c "
net/rds/ib_send.c
1028
printk(KERN_WARNING "RDS/IB: ib_post_send() rc=%d, but failed_wqe updated!\n", ret);
net/rds/ib_send.c
770
printk(KERN_WARNING "RDS/IB: ib_post_send to %pI6c "
net/rds/ib_send.c
864
printk(KERN_WARNING "RDS/IB: atomic ib_post_send to %pI6c "
net/rds/ib_send.c
872
printk(KERN_WARNING "RDS/IB: atomic ib_post_send() rc=%d, but failed_wqe updated!\n", ret);
net/rds/rdma_transport.c
168
printk(KERN_ERR "RDS: unknown event %u (%s)!\n",
net/rds/rdma_transport.c
208
printk(KERN_ERR "RDS/RDMA: failed to setup listener, "
net/rds/rdma_transport.c
219
printk(KERN_ERR "RDS/RDMA: failed to setup listener, "
net/rds/rdma_transport.c
226
printk(KERN_ERR "RDS/RDMA: failed to setup listener, "
net/rds/threads.c
77
printk(KERN_WARNING "%s: Cannot transition to state UP, "
net/rds/transport.c
57
printk(KERN_ERR "RDS Transport type %d already registered\n",
net/rds/transport.c
61
printk(KERN_INFO "Registered RDS/%s transport\n", trans->t_name);
net/rds/transport.c
73
printk(KERN_INFO "Unregistered RDS/%s transport\n", trans->t_name);
net/rfkill/core.c
1353
printk(KERN_DEBUG "rfkill: input handler enabled\n");
net/rfkill/core.c
1377
printk(KERN_DEBUG "rfkill: input handler disabled\n");
net/rxrpc/af_rxrpc.c
919
printk("Attempt to release alive rxrpc socket: %p\n", sk);
net/rxrpc/ar-internal.h
1624
printk("[%-6.6s] "FMT"\n", current->comm ,##__VA_ARGS__)
net/sched/sch_gred.c
695
printk(KERN_DEBUG "GRED: DP %u does not have a prio "
net/sunrpc/auth_gss/auth_gss.c
793
printk(KERN_CRIT "%s: bad return from "
net/sunrpc/auth_gss/gss_krb5_mech.c
390
printk("Failed to register kerberos gss mechanism!\n");
net/sunrpc/backchannel_rqst.c
105
printk(KERN_ERR "Failed to create bc receive xbuf\n");
net/sunrpc/backchannel_rqst.c
112
printk(KERN_ERR "Failed to create bc snd xbuf\n");
net/sunrpc/backchannel_rqst.c
170
printk(KERN_ERR "Failed to create bc rpc_rqst\n");
net/sunrpc/clnt.c
137
printk(KERN_INFO "RPC: Couldn't create pipefs entry"
net/sunrpc/clnt.c
189
printk(KERN_ERR "%s: unknown event: %ld\n", __func__, event);
net/sunrpc/clnt.c
2434
printk(KERN_NOTICE "RPC: Could not send backchannel reply "
net/sunrpc/clnt.c
2444
printk(KERN_NOTICE "RPC: Could not send backchannel reply "
net/sunrpc/clnt.c
2513
printk("%s: RPC call returned error %d\n",
net/sunrpc/clnt.c
3355
printk(KERN_INFO "clnt[%pISpc] RPC tasks[%d]\n",
net/sunrpc/clnt.c
3358
printk(KERN_INFO "-pid- flgs status -client- --rqstp- "
net/sunrpc/clnt.c
3370
printk(KERN_INFO "%5u %04x %6d %8p %8p %8ld %8p %sv%u %s a:%ps q:%s\n",
net/sunrpc/rpc_pipe.c
611
printk(KERN_WARNING "%s: %s failed to populate directory %pd\n",
net/sunrpc/sched.c
514
printk(KERN_ERR "RPC: Inactive task (%p) being woken up!\n", task);
net/sunrpc/svc.c
1243
printk(KERN_WARNING "svc: failed to register "
net/sunrpc/svc_xprt.c
599
printk(KERN_ERR "RPC request reserved %d but used %d\n",
net/sunrpc/svcsock.c
1584
printk(KERN_WARNING "svc: only UDP and TCP "
net/sunrpc/xprt.c
116
printk(KERN_INFO "RPC: Registered %s transport module.\n",
net/sunrpc/xprt.c
143
printk(KERN_INFO
net/sunrpc/xprt.c
729
printk(KERN_WARNING "xprt_adjust_timeout: rq_timeout = 0!\n");
net/sunrpc/xprtsock.c
2063
printk(KERN_ERR "%s: unhandled error (%d) connecting to %s\n",
net/sunrpc/xprtsock.c
2491
printk("%s: connect returned unhandled error %d\n",
net/sunrpc/xprtsock.c
646
printk(KERN_WARNING "Callback slot table overflowed\n");
net/xfrm/xfrm_user.c
4171
printk(KERN_NOTICE "xfrm_user: Unknown SA event %d\n",
net/xfrm/xfrm_user.c
4486
printk(KERN_NOTICE "xfrm_user: Unknown Policy event %d\n",
net/xfrm/xfrm_user.c
4651
printk(KERN_INFO "Initializing XFRM netlink socket\n");
samples/bpf/test_lwt_bpf.c
115
printk("bpf_l4_csum_replace failed: %d");
samples/bpf/test_lwt_bpf.c
122
printk("bpf_l3_csum_replace failed: %d", ret);
samples/bpf/test_lwt_bpf.c
132
printk("bpf_skb_store_bytes() failed: %d", ret);
samples/bpf/test_lwt_bpf.c
148
printk("bpf_skb_load_bytes failed: %d", ret);
samples/bpf/test_lwt_bpf.c
153
printk("out: rewriting from %x to %x", old_ip, new_ip);
samples/bpf/test_lwt_bpf.c
168
printk("skb_change_head() failed: %d", ret);
samples/bpf/test_lwt_bpf.c
177
printk("skb_store_bytes() failed: %d", ret);
samples/bpf/test_lwt_bpf.c
197
printk("redirected to %d", ifindex);
samples/bpf/test_lwt_bpf.c
224
printk("Set initial 96 bytes of header to FF");
samples/bpf/test_lwt_bpf.c
233
printk("redirected to %d", ifindex);
samples/bpf/test_lwt_bpf.c
241
printk("dropping with: %d", BPF_DROP);
samples/bpf/test_lwt_bpf.c
39
printk("len %d hash %d protocol %d", skb->len, skb->hash,
samples/bpf/test_lwt_bpf.c
41
printk("cb %d ingress_ifindex %d ifindex %d", skb->cb[0],
samples/bpf/test_lwt_bpf.c
51
printk("cb0: %x cb1: %x cb2: %x", skb->cb[0], skb->cb[1],
samples/bpf/test_lwt_bpf.c
53
printk("cb3: %x cb4: %x", skb->cb[3], skb->cb[4]);
samples/bpf/test_lwt_bpf.c
67
printk("packet truncated");
samples/bpf/test_lwt_bpf.c
71
printk("src: %x dst: %x", iph->saddr, iph->daddr);
samples/bpf/test_lwt_bpf.c
92
printk("bpf_l4_csum_replace failed: %d", ret);
samples/hw_breakpoint/data_breakpoint.c
35
printk(KERN_INFO "%s value is changed\n", ksym_name);
samples/hw_breakpoint/data_breakpoint.c
37
printk(KERN_INFO "Dump stack from sample_hbp_handler\n");
samples/hw_breakpoint/data_breakpoint.c
60
printk(KERN_INFO "HW Breakpoint for %s write installed\n", ksym_name);
samples/hw_breakpoint/data_breakpoint.c
65
printk(KERN_INFO "Breakpoint registration failed\n");
samples/hw_breakpoint/data_breakpoint.c
76
printk(KERN_INFO "HW Breakpoint for %s write uninstalled\n", ksym_name);
samples/kfifo/bytestream-example.c
100
printk(KERN_WARNING "value mismatch: test failed\n");
samples/kfifo/bytestream-example.c
105
printk(KERN_WARNING "size mismatch: test failed\n");
samples/kfifo/bytestream-example.c
108
printk(KERN_INFO "test passed\n");
samples/kfifo/bytestream-example.c
162
printk(KERN_ERR "error kfifo_alloc\n");
samples/kfifo/bytestream-example.c
58
printk(KERN_INFO "byte stream fifo test start\n");
samples/kfifo/bytestream-example.c
68
printk(KERN_INFO "fifo len: %u\n", kfifo_len(&test));
samples/kfifo/bytestream-example.c
72
printk(KERN_INFO "buf: %.*s\n", i, buf);
samples/kfifo/bytestream-example.c
76
printk(KERN_INFO "ret: %d\n", ret);
samples/kfifo/bytestream-example.c
79
printk(KERN_INFO "ret: %d\n", ret);
samples/kfifo/bytestream-example.c
82
printk(KERN_INFO "skip 1st element\n");
samples/kfifo/bytestream-example.c
89
printk(KERN_INFO "queue len: %u\n", kfifo_len(&test));
samples/kfifo/bytestream-example.c
93
printk(KERN_INFO "%d\n", i);
samples/kfifo/bytestream-example.c
98
printk(KERN_INFO "item = %d\n", i);
samples/kfifo/dma-example.c
103
printk(KERN_INFO "scatterlist for transmit:\n");
samples/kfifo/dma-example.c
105
printk(KERN_INFO
samples/kfifo/dma-example.c
124
printk(KERN_INFO "queue len: %u\n", kfifo_len(&fifo));
samples/kfifo/dma-example.c
127
printk(KERN_WARNING "size mismatch: test failed");
samples/kfifo/dma-example.c
130
printk(KERN_INFO "test passed\n");
samples/kfifo/dma-example.c
30
printk(KERN_INFO "DMA fifo test start\n");
samples/kfifo/dma-example.c
33
printk(KERN_WARNING "error kfifo_alloc\n");
samples/kfifo/dma-example.c
37
printk(KERN_INFO "queue size: %u\n", kfifo_size(&fifo));
samples/kfifo/dma-example.c
47
printk(KERN_INFO "queue len: %u\n", kfifo_len(&fifo));
samples/kfifo/dma-example.c
66
printk(KERN_INFO "DMA sgl entries: %d\n", nents);
samples/kfifo/dma-example.c
69
printk(KERN_WARNING "error kfifo_dma_in_prepare\n");
samples/kfifo/dma-example.c
74
printk(KERN_INFO "scatterlist for receive:\n");
samples/kfifo/dma-example.c
76
printk(KERN_INFO
samples/kfifo/dma-example.c
96
printk(KERN_INFO "DMA sgl entries: %d\n", nents);
samples/kfifo/dma-example.c
99
printk(KERN_WARNING "error kfifo_dma_out_prepare\n");
samples/kfifo/inttype-example.c
101
printk(KERN_INFO "test passed\n");
samples/kfifo/inttype-example.c
155
printk(KERN_ERR "error kfifo_alloc\n");
samples/kfifo/inttype-example.c
58
printk(KERN_INFO "int fifo test start\n");
samples/kfifo/inttype-example.c
65
printk(KERN_INFO "fifo len: %u\n", kfifo_len(&test));
samples/kfifo/inttype-example.c
69
printk(KERN_INFO "ret: %d\n", ret);
samples/kfifo/inttype-example.c
72
printk(KERN_INFO "ret: %d\n", ret);
samples/kfifo/inttype-example.c
75
printk(KERN_INFO "skip 1st element\n");
samples/kfifo/inttype-example.c
82
printk(KERN_INFO "queue len: %u\n", kfifo_len(&test));
samples/kfifo/inttype-example.c
86
printk(KERN_INFO "%d\n", i);
samples/kfifo/inttype-example.c
91
printk(KERN_INFO "item = %d\n", i);
samples/kfifo/inttype-example.c
93
printk(KERN_WARNING "value mismatch: test failed\n");
samples/kfifo/inttype-example.c
98
printk(KERN_WARNING "size mismatch: test failed\n");
samples/kfifo/record-example.c
105
printk(KERN_INFO "item = %.*s\n", ret, buf);
samples/kfifo/record-example.c
107
printk(KERN_WARNING "value mismatch: test failed\n");
samples/kfifo/record-example.c
112
printk(KERN_WARNING "size mismatch: test failed\n");
samples/kfifo/record-example.c
115
printk(KERN_INFO "test passed\n");
samples/kfifo/record-example.c
169
printk(KERN_ERR "error kfifo_alloc\n");
samples/kfifo/record-example.c
76
printk(KERN_INFO "record fifo test start\n");
samples/kfifo/record-example.c
81
printk(KERN_INFO "fifo peek len: %u\n", kfifo_peek_len(&test));
samples/kfifo/record-example.c
90
printk(KERN_INFO "skip 1st element\n");
samples/kfifo/record-example.c
93
printk(KERN_INFO "fifo len: %u\n", kfifo_len(&test));
samples/kfifo/record-example.c
98
printk(KERN_INFO "%.*s\n", ret, buf);
security/apparmor/lib.c
231
printk(KERN_INFO "AppArmor: %s\n", str);
security/commoncap.c
48
printk(KERN_INFO "warning: `%s' has both setuid-root and"
security/commoncap.c
789
printk(KERN_NOTICE "Invalid argument reading file caps for %s\n",
security/keys/internal.h
27
printk(KERN_DEBUG "==> %s("FMT")\n", __func__, ##__VA_ARGS__)
security/keys/internal.h
29
printk(KERN_DEBUG "<== %s()"FMT"\n", __func__, ##__VA_ARGS__)
security/keys/internal.h
31
printk(KERN_DEBUG " "FMT"\n", ##__VA_ARGS__)
security/keys/key.c
40
printk("__key_check: key %p {%08x} should be {%08x}\n",
security/smack/smack_lsm.c
2956
printk(KERN_WARNING
security/smack/smack_netfilter.c
76
printk(KERN_DEBUG "Smack: Registering netfilter hooks\n");
security/smack/smackfs.c
2942
printk(KERN_ERR "%s failed %d while creating inodes\n",
security/smack/smackfs.c
3009
printk(KERN_ERR "smackfs: sysfs mountpoint problem.\n");
security/smack/smackfs.c
3015
printk(KERN_ERR "smackfs: could not mount!\n");
security/smack/smackfs.c
737
printk(KERN_WARNING "%s:%d remove rc = %d\n",
security/smack/smackfs.c
746
printk(KERN_WARNING "%s:%d add rc = %d\n",
security/tomoyo/condition.c
391
#define dprintk printk
sound/aoa/codecs/onyx.c
1001
printk(KERN_ERR PFX "failed to read control register\n");
sound/aoa/codecs/onyx.c
1014
printk(KERN_DEBUG PFX "created and attached onyx instance\n");
sound/aoa/codecs/onyx.c
859
printk(KERN_ERR PFX "gpios not assigned!!\n");
sound/aoa/codecs/onyx.c
871
printk(KERN_ERR PFX "failed to initialise onyx registers\n");
sound/aoa/codecs/onyx.c
876
printk(KERN_ERR PFX "failed to create onyx snd device!\n");
sound/aoa/codecs/onyx.c
911
printk(KERN_ERR PFX "error creating onyx pcm\n");
sound/aoa/codecs/onyx.c
963
printk(KERN_INFO PFX "attached to onyx codec via i2c\n");
sound/aoa/codecs/onyx.c
977
printk(KERN_ERR PFX "onyx_exit_codec called without soundbus_dev!\n");
sound/aoa/codecs/tas.c
767
printk(KERN_ERR PFX "gpios not assigned!!\n");
sound/aoa/codecs/tas.c
773
printk(KERN_ERR PFX "tas failed to initialise\n");
sound/aoa/codecs/tas.c
782
printk(KERN_ERR PFX "error attaching tas to soundbus\n");
sound/aoa/codecs/tas.c
787
printk(KERN_ERR PFX "failed to create tas snd device!\n");
sound/aoa/codecs/tas.c
869
printk(KERN_DEBUG
sound/aoa/codecs/toonie.c
101
printk(KERN_ERR PFX "error creating toonie pcm\n");
sound/aoa/codecs/toonie.c
114
printk(KERN_ERR PFX "toonie_exit_codec called without soundbus_dev!\n");
sound/aoa/codecs/toonie.c
94
printk(KERN_ERR PFX "failed to create toonie snd device!\n");
sound/aoa/core/alsa.c
37
printk(KERN_ERR "snd-aoa: couldn't register alsa card\n");
sound/aoa/core/alsa.c
71
printk(KERN_ERR "snd-aoa: failed to create snd device (%d)\n", err);
sound/aoa/core/alsa.c
76
printk(KERN_ERR "snd-aoa: failed to register "
sound/aoa/core/alsa.c
78
printk(KERN_ERR "snd-aoa: have you forgotten the "
sound/aoa/core/alsa.c
94
printk(KERN_ERR "snd-aoa: failed to add alsa control (%d)\n",
sound/aoa/core/core.c
136
printk(KERN_ERR "snd-aoa: fabric unassigned "
sound/aoa/core/core.c
35
printk(KERN_ERR "snd-aoa: fabric didn't like codec %s\n",
sound/aoa/core/core.c
45
printk(KERN_ERR "snd-aoa: codec %s didn't init\n", c->name);
sound/aoa/core/gpio-pmf.c
186
printk(KERN_ERR "snd-aoa: gpio layer failed to"
sound/aoa/core/gpio-pmf.c
22
printk(KERN_WARNING "pmf_gpio_set_" #name \
sound/aoa/core/gpio-pmf.c
45
printk(KERN_WARNING "pmf_gpio_set_hw_reset"
sound/aoa/fabrics/layout.c
1030
printk(KERN_ERR "snd-aoa-fabric-layout: unknown layout\n");
sound/aoa/fabrics/layout.c
1049
printk(KERN_DEBUG
sound/aoa/fabrics/layout.c
1054
printk(KERN_DEBUG
sound/aoa/fabrics/layout.c
1077
printk(KERN_INFO "snd-aoa-fabric-layout: can't use,"
sound/aoa/fabrics/layout.c
783
printk(KERN_INFO "snd-aoa-fabric-layout: "
sound/aoa/fabrics/layout.c
788
printk(KERN_INFO "snd-aoa-fabric-layout: "
sound/aoa/fabrics/layout.c
794
printk(KERN_INFO "snd-aoa-fabric-layout: "
sound/aoa/fabrics/layout.c
806
printk(KERN_INFO "snd-aoa-fabric-layout: can use this codec\n");
sound/aoa/soundbus/core.c
148
printk(KERN_ERR "soundbus: adding device failed sanity check!\n");
sound/aoa/soundbus/i2sbus/control.c
125
printk(KERN_ERR "i2sbus: INVALID CELL ENABLE VALUE\n");
sound/aoa/soundbus/i2sbus/control.c
168
printk(KERN_ERR "i2sbus: INVALID CLOCK ENABLE VALUE\n");
sound/aoa/soundbus/i2sbus/core.c
267
printk(KERN_ERR "i2sbus: failed to claim resource %d!\n", i);
sound/aoa/soundbus/i2sbus/core.c
301
printk(KERN_ERR "i2sbus: control layer didn't like bus\n");
sound/aoa/soundbus/i2sbus/core.c
306
printk(KERN_DEBUG "i2sbus: device registration error!\n");
sound/aoa/soundbus/i2sbus/core.c
347
printk(KERN_ERR "i2sbus_control_init API breakage\n");
sound/aoa/soundbus/i2sbus/pcm.c
258
printk(KERN_ERR "i2sbus_wait_for_stop: timed out\n");
sound/aoa/soundbus/i2sbus/pcm.c
665
printk(KERN_ERR
sound/aoa/soundbus/i2sbus/pcm.c
847
printk(KERN_ERR "i2sbus: a codec didn't unregister!\n");
sound/aoa/soundbus/i2sbus/pcm.c
866
printk(KERN_ERR "i2sbus: pcm name and id must be set!\n");
sound/aoa/soundbus/i2sbus/pcm.c
889
printk(KERN_DEBUG
sound/aoa/soundbus/i2sbus/pcm.c
894
printk(KERN_DEBUG
sound/aoa/soundbus/i2sbus/pcm.c
919
printk(KERN_DEBUG
sound/aoa/soundbus/i2sbus/pcm.c
926
printk(KERN_DEBUG "i2sbus: failed to get module reference!\n");
sound/aoa/soundbus/i2sbus/pcm.c
932
printk(KERN_DEBUG
sound/aoa/soundbus/i2sbus/pcm.c
942
printk(KERN_DEBUG "i2sbus: failed to create pcm\n");
sound/aoa/soundbus/i2sbus/pcm.c
954
printk(KERN_ERR
sound/aoa/soundbus/i2sbus/pcm.c
971
printk(KERN_ERR
sound/aoa/soundbus/i2sbus/pcm.c
994
printk(KERN_ERR "i2sbus: error registering new pcm\n");
sound/arm/aaci.c
1006
printk(KERN_WARNING "AACI: FIFO depth %d not supported\n",
sound/last.c
15
printk(KERN_INFO "ALSA device list:\n");
sound/last.c
19
printk(KERN_INFO " #%i: %s\n", idx, card->longname);
sound/last.c
25
printk(KERN_INFO " No soundcards found.\n");
sound/mips/ad1843.c
473
printk(KERN_ERR "ad1843: AD1843 won't initialize\n");
sound/mips/ad1843.c
485
printk(KERN_ERR
sound/mips/hal2.c
764
printk(KERN_INFO "SGI HAL2 revision %i.%i.%i\n",
sound/mips/hal2.c
784
printk(KERN_ERR "HAL2: Can't get irq %d\n", SGI_HPCDMA_IRQ);
sound/mips/sgio2audio.c
801
printk(KERN_ERR
sound/mips/sgio2audio.c
823
printk(KERN_ERR "sgio2audio: cannot allocate irq %d\n",
sound/oss/dmasound/dmasound_atari.c
1485
printk(KERN_ERR "dmasound_atari: overflowed state buffer alloc.\n") ;
sound/oss/dmasound/dmasound_atari.c
1499
printk(KERN_ERR "dmasound_atari: overflowed state buffer alloc.\n") ;
sound/oss/dmasound/dmasound_atari.c
1607
printk("DMA sound driver: Timer A interrupt already in use\n");
sound/oss/dmasound/dmasound_core.c
1168
printk(KERN_ERR "dmasound_core: couldn't register fops\n") ;
sound/oss/dmasound/dmasound_core.c
1311
printk("dmasound: stat buffer used %d bytes\n", len) ;
sound/oss/dmasound/dmasound_core.c
1315
printk(KERN_ERR "dmasound_core: stat buffer overflowed!\n");
sound/oss/dmasound/dmasound_core.c
1391
printk(KERN_ERR "DMA sound driver: Interrupt initialization failed\n");
sound/oss/dmasound/dmasound_core.c
1396
printk(KERN_INFO "%s DMA sound driver rev %03d installed\n",
sound/oss/dmasound/dmasound_core.c
1399
printk(KERN_INFO
sound/oss/dmasound/dmasound_core.c
1403
printk(KERN_INFO "Write will use %4d fragments of %7d bytes as default\n",
sound/oss/dmasound/dmasound_core.c
1441
printk("dmasound_setup: invalid catch radius, using default = %d\n", catchRadius);
sound/oss/dmasound/dmasound_core.c
1447
printk("dmasound_setup: invalid number of buffers, using default = %d\n", numWriteBufs);
sound/oss/dmasound/dmasound_core.c
1455
printk("dmasound_setup: invalid write buffer size, using default = %d\n", writeBufSize);
sound/oss/dmasound/dmasound_core.c
1461
printk("dmasound_setup: invalid number of arguments\n");
sound/oss/dmasound/dmasound_core.c
452
printk("dmasound_core: tried to sq_setup a locked queue\n") ;
sound/oss/dmasound/dmasound_core.c
505
printk("dmasound_core: invalid frag size (user set %d)\n", sq->user_frag_size) ;
sound/oss/dmasound/dmasound_core.c
516
printk("dmasound_core: invalid frag count (user set %d)\n", sq->user_frags) ;
sound/oss/dmasound/dmasound_core.c
861
printk(KERN_WARNING "dmasound: Timeout draining output\n");
sound/oss/dmasound/dmasound_core.c
954
printk("dmasound_core: tried to set_queue_frags on a locked queue\n") ;
sound/oss/dmasound/dmasound_paula.c
662
printk(KERN_ERR "dmasound_paula: overflowed state buffer alloc.\n") ;
sound/parisc/harmony.c
459
printk(KERN_DEBUG PFX "playback_pointer is 0x%lx-0x%lx = %d bytes\n",
sound/parisc/harmony.c
488
printk(KERN_DEBUG PFX "capture_pointer is 0x%lx-0x%lx = %d bytes\n",
sound/parisc/harmony.c
605
printk(KERN_ERR PFX "cannot allocate graveyard buffer!\n");
sound/parisc/harmony.c
615
printk(KERN_ERR PFX "cannot allocate silence buffer!\n");
sound/parisc/harmony.c
865
printk(KERN_ERR PFX "unable to remap hpa 0x%lx\n",
sound/parisc/harmony.c
874
printk(KERN_ERR PFX "could not obtain interrupt %d",
sound/pci/ak4531_codec.c
36
printk(KERN_DEBUG "ak4531 0x%x: 0x%x\n",
sound/pci/als300.c
79
#define snd_als300_dbgplay(format, args...) printk(KERN_ERR format, ##args)
sound/pci/asihpi/hpidebug.c
20
printk(KERN_INFO "debug start\n");
sound/pci/asihpi/hpidebug.c
40
printk(KERN_DEBUG "HPI_MSG%d,%d,%d,%d,%d\n", phm->version,
sound/pci/asihpi/hpidebug.c
60
printk(KERN_DEBUG "%p:", (pdata + i));
sound/pci/asihpi/hpidebug.c
63
printk(KERN_CONT "%s%04x", k == 0 ? "" : " ", pdata[i]);
sound/pci/asihpi/hpidebug.c
65
printk(KERN_CONT "\n");
sound/pci/asihpi/hpidebug.h
39
printk(KERN_ERR FILE_LINE \
sound/pci/asihpi/hpidebug.h
47
printk(HPI_DEBUG_FLAG_##level \
sound/pci/asihpi/hpidebug.h
81
printk(KERN_DEBUG "HPI_RES%d,%d,%d\n", \
sound/pci/asihpi/hpioctl.c
579
printk(KERN_INFO "ASIHPI driver " HPI_VER_STRING "\n");
sound/pci/azt3328.c
2252
printk(KERN_DEBUG "reg %04x bit %d: %02x %02x %02x\n",
sound/ppc/burgundy.c
26
printk(KERN_DEBUG "burgundy_busy_wait: timeout\n");
sound/ppc/burgundy.c
37
printk(KERN_DEBUG "burgundy_extend_wait: timeout #1\n");
sound/ppc/burgundy.c
42
printk(KERN_DEBUG "burgundy_extend_wait: timeout #2\n");
sound/ppc/burgundy.c
609
printk(KERN_WARNING "pmac burgundy: disabled by MacOS :-(\n");
sound/soc/atmel/atmel_ssc_dai.c
549
printk(KERN_WARNING "atmel_ssc_dai: unsupported PCM format");
sound/soc/atmel/atmel_ssc_dai.c
598
printk(KERN_WARNING "atmel_ssc_dai: unsupported DAI format 0x%x\n",
sound/soc/atmel/atmel_ssc_dai.c
686
printk(KERN_WARNING
sound/soc/au1x/ac97c.c
179
printk(KERN_ERR "ac97c: codec not ready after cold reset\n");
sound/soc/au1x/dbdma2.c
33
#define MSG(x...) printk(KERN_INFO "au1xpsc_pcm: " x)
sound/soc/au1x/psc-ac97.c
183
printk(KERN_ERR "au1xpsc-ac97: PSC not ready!\n");
sound/soc/au1x/psc-ac97.c
196
printk(KERN_ERR "au1xpsc-ac97: AC97 ctrl not ready\n");
sound/soc/au1x/psc-ac97.c
260
printk(KERN_ERR "PSC-AC97: can't disable!\n");
sound/soc/au1x/psc-ac97.c
276
printk(KERN_ERR "PSC-AC97: can't enable!\n");
sound/soc/codecs/da7210.c
1343
printk(KERN_ERR "Failed to register da7210 SPI driver: %d\n",
sound/soc/codecs/tlv320aic23.c
317
printk(KERN_ERR "%s:Invalid rate %u,%u requested\n",
sound/soc/codecs/tlv320aic23.c
326
printk(KERN_DEBUG "actual samplerate = %u,%u reg=%x\n",
sound/soc/codecs/tlv320aic32x4.c
126
printk(KERN_ERR "%s: MFP2 is not configure as a GPIO output\n",
sound/soc/codecs/tlv320aic32x4.c
167
printk(KERN_ERR "%s: MFP4 is not configure as a GPIO output\n",
sound/soc/codecs/tlv320aic32x4.c
207
printk(KERN_ERR "%s: MFP5 is not configure as a GPIO output\n",
sound/soc/codecs/tlv320aic32x4.c
627
printk(KERN_ERR "aic32x4: invalid clock provider\n");
sound/soc/codecs/tlv320aic32x4.c
654
printk(KERN_ERR "aic32x4: invalid DAI interface format\n");
sound/soc/codecs/tlv320aic32x4.c
89
printk(KERN_DEBUG "%s: Mic Bias will be turned ON\n", __func__);
sound/soc/codecs/tlv320aic32x4.c
94
printk(KERN_DEBUG "%s: Mic Bias will be turned OFF\n",
sound/soc/codecs/tlv320aic3x.c
1197
printk(KERN_ERR "%s(): unable to setup PLL\n", __func__);
sound/soc/codecs/wm8350.c
988
printk(KERN_ERR "wm8350: fll freq %d out of range\n", output);
sound/soc/codecs/wm8510.c
290
printk(KERN_WARNING
sound/soc/codecs/wm8510.c
692
printk(KERN_ERR "Failed to register WM8510 I2C driver: %d\n",
sound/soc/codecs/wm8510.c
699
printk(KERN_ERR "Failed to register WM8510 SPI driver: %d\n",
sound/soc/codecs/wm8580.c
422
printk(KERN_ERR "wm8580: Unable to scale output frequency "
sound/soc/codecs/wm8580.c
437
printk(KERN_ERR
sound/soc/codecs/wm8711.c
478
printk(KERN_ERR "Failed to register WM8711 I2C driver: %d\n",
sound/soc/codecs/wm8711.c
485
printk(KERN_ERR "Failed to register WM8711 SPI driver: %d\n",
sound/soc/codecs/wm8728.c
319
printk(KERN_ERR "Failed to register wm8728 I2C driver: %d\n",
sound/soc/codecs/wm8728.c
326
printk(KERN_ERR "Failed to register wm8728 SPI driver: %d\n",
sound/soc/codecs/wm8737.c
706
printk(KERN_ERR "Failed to register WM8737 I2C driver: %d\n",
sound/soc/codecs/wm8737.c
713
printk(KERN_ERR "Failed to register WM8737 SPI driver: %d\n",
sound/soc/codecs/wm8741.c
686
printk(KERN_ERR "Failed to register wm8741 SPI driver: %d\n",
sound/soc/codecs/wm8750.c
494
printk(KERN_ERR "wm8750: could not get coeff for mclk %d @ rate %d\n",
sound/soc/codecs/wm8750.c
693
printk(KERN_ERR "wm8750: failed to reset: %d\n", ret);
sound/soc/codecs/wm8750.c
828
printk(KERN_ERR "Failed to register wm8750 I2C driver: %d\n",
sound/soc/codecs/wm8750.c
835
printk(KERN_ERR "Failed to register wm8750 SPI driver: %d\n",
sound/soc/codecs/wm8753.c
1163
printk(KERN_ERR "wm8753 invalid MCLK or rate\n");
sound/soc/codecs/wm8753.c
1604
printk(KERN_ERR "Failed to register wm8753 I2C driver: %d\n",
sound/soc/codecs/wm8753.c
1611
printk(KERN_ERR "Failed to register wm8753 SPI driver: %d\n",
sound/soc/codecs/wm8753.c
716
printk(KERN_WARNING
sound/soc/codecs/wm8776.c
537
printk(KERN_ERR "Failed to register wm8776 I2C driver: %d\n",
sound/soc/codecs/wm8776.c
544
printk(KERN_ERR "Failed to register wm8776 SPI driver: %d\n",
sound/soc/codecs/wm8900.c
1310
printk(KERN_ERR "Failed to register wm8900 I2C driver: %d\n",
sound/soc/codecs/wm8900.c
1317
printk(KERN_ERR "Failed to register wm8900 SPI driver: %d\n",
sound/soc/codecs/wm8900.c
699
printk(KERN_WARNING "wm8900: FLL rate %u out of range, Fref=%u"
sound/soc/codecs/wm8900.c
702
printk(KERN_ERR "wm8900: Invalid FLL division rate %u, "
sound/soc/codecs/wm8940.c
560
printk(KERN_WARNING
sound/soc/codecs/wm8974.c
290
printk(KERN_WARNING
sound/soc/codecs/wm8983.c
1084
printk(KERN_ERR "Failed to register wm8983 I2C driver: %d\n",
sound/soc/codecs/wm8983.c
1091
printk(KERN_ERR "Failed to register wm8983 SPI driver: %d\n",
sound/soc/codecs/wm8983.c
765
printk(KERN_ERR "%s: WM8983 N value is not within"
sound/soc/codecs/wm8985.c
1220
printk(KERN_ERR "Failed to register wm8985 I2C driver: %d\n",
sound/soc/codecs/wm8985.c
1227
printk(KERN_ERR "Failed to register wm8985 SPI driver: %d\n",
sound/soc/codecs/wm8985.c
862
printk(KERN_ERR "%s: WM8985 N value is not within"
sound/soc/codecs/wm8988.c
920
printk(KERN_ERR "Failed to register WM8988 I2C driver: %d\n",
sound/soc/codecs/wm8988.c
927
printk(KERN_ERR "Failed to register WM8988 SPI driver: %d\n",
sound/soc/codecs/wm8990.c
303
printk(KERN_WARNING
sound/soc/codecs/wm8990.c
311
printk(KERN_WARNING
sound/soc/codecs/wm8990.c
319
printk(KERN_WARNING
sound/soc/codecs/wm8990.c
327
printk(KERN_WARNING
sound/soc/codecs/wm8990.c
822
printk(KERN_WARNING
sound/soc/codecs/wm8991.c
369
printk(KERN_WARNING
sound/soc/codecs/wm8991.c
378
printk(KERN_WARNING
sound/soc/codecs/wm8991.c
387
printk(KERN_WARNING
sound/soc/codecs/wm8991.c
396
printk(KERN_WARNING
sound/soc/codecs/wm8991.c
893
printk(KERN_WARNING
sound/soc/codecs/wm8995.c
2284
printk(KERN_ERR "Failed to register wm8995 I2C driver: %d\n",
sound/soc/codecs/wm8995.c
2291
printk(KERN_ERR "Failed to register wm8995 SPI driver: %d\n",
sound/soc/kirkwood/kirkwood-dma.c
51
printk(KERN_WARNING "%s: got err interrupt 0x%lx\n",
sound/soc/kirkwood/kirkwood-dma.c
59
printk(KERN_WARNING "%s: unexpected interrupt %lx\n",
sound/soc/pxa/pxa2xx-ac97-lib.c
108
printk(KERN_ERR "%s: write error (ac97_reg=%d GSR=%#lx)\n",
sound/soc/pxa/pxa2xx-ac97-lib.c
219
printk(KERN_INFO "%s: warm reset timeout (GSR=%#lx)\n",
sound/soc/pxa/pxa2xx-ac97-lib.c
255
printk(KERN_INFO "%s: cold reset timeout (GSR=%#lx)\n",
sound/soc/pxa/pxa2xx-ac97-lib.c
73
printk(KERN_ERR "%s: read error (ac97_reg=%d GSR=%#lx)\n",
sound/soc/renesas/hac.c
211
printk(KERN_INFO "hac: reset: AC97 link down!\n");
sound/soc/samsung/smdk_spdif.c
25
printk(KERN_WARNING "%s: Cannot find fout_epll.\n",
sound/soc/samsung/smdk_spdif.c
32
printk(KERN_WARNING "%s: Cannot find mout_epll.\n",
sound/soc/samsung/smdk_spdif.c
40
printk(KERN_WARNING "%s: Cannot find sclk_audio.\n",
sound/soc/samsung/smdk_spdif.c
48
printk(KERN_WARNING "%s: Cannot find sclk_spdif.\n",
sound/soc/samsung/smdk_spdif.c
81
printk(KERN_ERR "%s: failed to get fout_epll\n", __func__);
sound/soc/samsung/smdk_spdif.c
90
printk(KERN_ERR "%s: failed to get sclk_spdif\n", __func__);
sound/soc/ti/davinci-i2s.c
348
printk(KERN_ERR "%s:bad master\n", __func__);
sound/soc/ti/davinci-i2s.c
380
printk(KERN_ERR "%s:bad format\n", __func__);
sound/soc/ti/davinci-mcasp.c
1498
printk(KERN_WARNING "davinci-mcasp: unsupported PCM format");
sound/soc/ti/davinci-mcasp.c
198
printk(KERN_ERR "GBLCTL write error\n");
sound/soc/ti/omap-abe-twl6040.c
67
printk(KERN_ERR "can't set codec system clock\n");
sound/soc/ti/omap-abe-twl6040.c
87
printk(KERN_ERR "can't set DMIC cpu system clock\n");
sound/soc/ti/omap-abe-twl6040.c
93
printk(KERN_ERR "can't set DMIC output clock\n");
sound/soc/ti/omap-mcbsp.c
1028
printk(KERN_ERR "%s: not enough bandwidth for desired rate and "
sound/soc/ti/osk5912.c
131
printk(KERN_ERR "Could not get mclk clock\n");
sound/soc/ti/osk5912.c
142
printk(KERN_ERR "Cannot set MCLK for AIC23 CODEC\n");
sound/soc/ti/osk5912.c
148
printk(KERN_INFO "MCLK = %d [%d]\n",
sound/soc/ti/osk5912.c
49
printk(KERN_ERR "can't set codec system clock\n");
sound/sound_core.c
224
printk(KERN_ERR "Sound device %d went missing!\n", unit);
sound/sound_core.c
610
printk(KERN_ERR "soundcore: sound device already in use.\n");
sound/sparc/dbri.c
1006
printk(KERN_ERR "DBRI: xmit_fixed: Illegal pipe number\n");
sound/sparc/dbri.c
1011
printk(KERN_ERR "DBRI: xmit_fixed: "
sound/sparc/dbri.c
1017
printk(KERN_ERR "DBRI: xmit_fixed: Non-fixed pipe %d\n", pipe);
sound/sparc/dbri.c
1022
printk(KERN_ERR "DBRI: xmit_fixed: Called on receive pipe %d\n",
sound/sparc/dbri.c
1049
printk(KERN_ERR "DBRI: recv_fixed called with "
sound/sparc/dbri.c
1055
printk(KERN_ERR "DBRI: recv_fixed called on "
sound/sparc/dbri.c
1061
printk(KERN_ERR "DBRI: recv_fixed called on "
sound/sparc/dbri.c
1096
printk(KERN_ERR "DBRI: setup_descs: Illegal pipe number\n");
sound/sparc/dbri.c
1101
printk(KERN_ERR "DBRI: setup_descs: Uninitialized pipe %d\n",
sound/sparc/dbri.c
1111
printk(KERN_ERR "DBRI: setup_descs: "
sound/sparc/dbri.c
1117
printk(KERN_ERR
sound/sparc/dbri.c
112
#define dprintk(a, x...) if (dbri_debug & a) printk(KERN_DEBUG x)
sound/sparc/dbri.c
1126
printk(KERN_ERR "DBRI: recv_on_pipe: "
sound/sparc/dbri.c
1158
printk(KERN_ERR "DBRI: setup_descs: No descriptors\n");
sound/sparc/dbri.c
1198
printk(KERN_ERR "DBRI: setup_descs: "
sound/sparc/dbri.c
1282
printk(KERN_ERR "DBRI: illegal bits_per_frame "
sound/sparc/dbri.c
1593
printk(KERN_WARNING "DBRI: Unsupported rate %d Hz\n", rate);
sound/sparc/dbri.c
1615
printk(KERN_WARNING "DBRI: Unsupported format %d\n", format);
sound/sparc/dbri.c
1653
printk(KERN_INFO "DBRI: Using speakerbox / "
sound/sparc/dbri.c
1660
printk(KERN_ERR "DBRI: no mmcodec found.\n");
sound/sparc/dbri.c
1781
printk(KERN_ERR "DBRI: invalid td on pipe %d\n", pipe);
sound/sparc/dbri.c
1811
printk(KERN_ERR "DBRI: invalid rd on pipe %d\n", pipe);
sound/sparc/dbri.c
1854
printk(KERN_ERR "DBRI: Command read interrupt\n");
sound/sparc/dbri.c
1869
printk(KERN_ERR "DBRI: Underrun error\n");
sound/sparc/dbri.c
1895
printk(KERN_WARNING
sound/sparc/dbri.c
1938
printk(KERN_ERR
sound/sparc/dbri.c
1942
printk(KERN_ERR
sound/sparc/dbri.c
1946
printk(KERN_ERR
sound/sparc/dbri.c
1949
printk(KERN_ERR
sound/sparc/dbri.c
2533
printk(KERN_ERR "DBRI: could not allocate registers\n");
sound/sparc/dbri.c
2542
printk(KERN_ERR "DBRI: Can't get irq %d\n", dbri->irq);
sound/sparc/dbri.c
2595
printk(KERN_ERR "DBRI-%d: No IRQ.\n", dev);
sound/sparc/dbri.c
2634
printk(KERN_INFO "audio%d at %p (irq %d) is DBRI(%c)+CS4215(%d)\n",
sound/sparc/dbri.c
600
printk(KERN_ERR "DBRI reverse_bytes: unsupported length\n");
sound/sparc/dbri.c
655
printk(KERN_ERR "DBRI: Chip never completed command buffer\n");
sound/sparc/dbri.c
676
printk(KERN_ERR "DBRI: no space for commands.");
sound/sparc/dbri.c
828
printk(KERN_ERR "DBRI: reset_pipe called with "
sound/sparc/dbri.c
835
printk(KERN_ERR "DBRI: reset_pipe called "
sound/sparc/dbri.c
864
printk(KERN_ERR "DBRI: setup_pipe called "
sound/sparc/dbri.c
870
printk(KERN_ERR "DBRI: setup_pipe called "
sound/sparc/dbri.c
902
printk(KERN_ERR
sound/sparc/dbri.c
910
printk(KERN_ERR "DBRI: link_time_slot called "
sound/sparc/dbri.c
961
printk(KERN_ERR
sound/usb/6fire/firmware.c
363
printk(KERN_CONT "%02x ", buffer[i]);
sound/usb/6fire/firmware.c
364
printk(KERN_CONT "\n");
sound/usb/6fire/firmware.c
399
printk(KERN_CONT "%02x ", buffer[i]);
sound/usb/6fire/firmware.c
400
printk(KERN_CONT "\n");
sound/usb/usx2y/usb_stream.c
645
printk(KERN_CONT " %i", l);
sound/usb/usx2y/usb_stream.c
647
printk(KERN_CONT "\n");
tools/perf/util/trace-event-parse.c
236
char *printk;
tools/perf/util/trace-event-parse.c
251
printk = strdup(fmt+1);
tools/perf/util/trace-event-parse.c
253
tep_register_print_string(pevent, printk, addr);
tools/perf/util/trace-event-parse.c
254
free(printk);
tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c
83
printk(KERN_DEBUG "start--> \n");
tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c
92
printk(KERN_DEBUG "t1: %08u t2: %08u diff_pmtmr: %08u diff_tsc: %016llu\n", then, now, diff, diff_tsc);
tools/power/cpupower/debug/kernel/cpufreq-test_tsc.c
96
printk(KERN_DEBUG "<-- end \n");
tools/testing/memblock/linux/printk.h
19
#define pr_info printk
tools/testing/memblock/linux/printk.h
20
#define pr_debug printk
tools/testing/memblock/linux/printk.h
21
#define pr_cont printk
tools/testing/memblock/linux/printk.h
22
#define pr_err printk
tools/testing/memblock/linux/printk.h
23
#define pr_warn printk
tools/testing/radix-tree/idr-test.c
212
printk("vvv Ignore these warnings\n");
tools/testing/radix-tree/idr-test.c
223
printk("^^^ Warnings over\n");
tools/testing/radix-tree/maple.c
34006
printk("start is wrong: %lx (%lu) vs expected %lx (%lu)\n",
tools/testing/radix-tree/maple.c
34016
printk("last is wrong: %lx (%lu) vs expected %lx (%lu)\n",
tools/testing/radix-tree/maple.c
34035
printk("!!%lu-%lu -> %p not %p or %p\n",
tools/testing/radix-tree/maple.c
34059
printk("!!%lu-%lu -> %p not %p\n", mas.index, mas.last, entry, expected);
tools/testing/radix-tree/maple.c
34151
printk("Error: %p %lu-%lu %p != %lu-%lu %p %p line %d i %d\n",
tools/testing/radix-tree/maple.c
34190
printk("%lu-%lu %p != %p or %p\n",
tools/testing/radix-tree/maple.c
34199
printk("%lu-%lu %p != %p\n", mas.index,
tools/testing/radix-tree/maple.c
34539
printk("\nERROR: %lx - %lx = %p not %p\n",
tools/testing/selftests/bpf/progs/lru_bug.c
21
int printk(void *ctx)
tools/testing/selftests/bpf/test_kmods/bpf_testmod.c
1585
printk("bpf_testmod: oh no, recursing into test_1, recursion_misses %llu",
tools/testing/selftests/net/ipsec.c
1056
printk("NLMSG_ERROR: %d: %s",
tools/testing/selftests/net/ipsec.c
1062
printk("didn't find allocated xfrm state in dump");
tools/testing/selftests/net/ipsec.c
1080
printk("Failed to add xfrm state");
tools/testing/selftests/net/ipsec.c
1086
printk("Failed to add xfrm state");
tools/testing/selftests/net/ipsec.c
1094
printk("Failed to check xfrm state");
tools/testing/selftests/net/ipsec.c
1163
printk("Failed to add xfrm policy");
tools/testing/selftests/net/ipsec.c
1169
printk("Failed to add xfrm policy");
tools/testing/selftests/net/ipsec.c
1214
printk("Failed to add xfrm policy");
tools/testing/selftests/net/ipsec.c
1220
printk("Failed to add xfrm policy");
tools/testing/selftests/net/ipsec.c
1266
printk("Failed to remove xfrm state");
tools/testing/selftests/net/ipsec.c
1271
printk("Failed to remove xfrm state");
tools/testing/selftests/net/ipsec.c
1316
printk("allocated spi is different from requested: %#x != %#x",
tools/testing/selftests/net/ipsec.c
1322
printk("expected NLMSG_ERROR, got %d", (int)answer.nh.nlmsg_type);
tools/testing/selftests/net/ipsec.c
1326
printk("NLMSG_ERROR: %d: %s", answer.error, strerror(-answer.error));
tools/testing/selftests/net/ipsec.c
1340
printk("Failed to open xfrm netlink socket");
tools/testing/selftests/net/ipsec.c
1355
printk("Wrong address length %d", addr_len);
tools/testing/selftests/net/ipsec.c
1359
printk("Wrong address family %d", snl.nl_family);
tools/testing/selftests/net/ipsec.c
1411
printk("expected NLMSG_ERROR, got %d", (int)req.nh.nlmsg_type);
tools/testing/selftests/net/ipsec.c
1416
printk("NLMSG_ERROR: %d: %s", req.error, strerror(-req.error));
tools/testing/selftests/net/ipsec.c
1428
printk("xfrm_user_acquire has changed %x %x %x",
tools/testing/selftests/net/ipsec.c
1457
printk("Failed to add xfrm state");
tools/testing/selftests/net/ipsec.c
1485
printk("expected NLMSG_ERROR, got %d", (int)req.nh.nlmsg_type);
tools/testing/selftests/net/ipsec.c
1490
printk("NLMSG_ERROR: %d: %s", req.error, strerror(-req.error));
tools/testing/selftests/net/ipsec.c
1501
printk("expire.hard is not set: %x", req.expire.hard);
tools/testing/selftests/net/ipsec.c
1532
printk("Failed to add xfrm policy");
tools/testing/selftests/net/ipsec.c
1563
printk("expected NLMSG_ERROR, got %d", (int)req.nh.nlmsg_type);
tools/testing/selftests/net/ipsec.c
1568
printk("NLMSG_ERROR: %d: %s", req.error, strerror(-req.error));
tools/testing/selftests/net/ipsec.c
1579
printk("expire.hard is not set: %x", req.expire.hard);
tools/testing/selftests/net/ipsec.c
1638
printk("expected NLMSG_ERROR, got %d", (int)req.nh.nlmsg_type);
tools/testing/selftests/net/ipsec.c
1643
printk("NLMSG_ERROR: %d: %s", req.error, strerror(-req.error));
tools/testing/selftests/net/ipsec.c
1712
printk("expected NLMSG_ERROR, got %d", (int)req.nh.nlmsg_type);
tools/testing/selftests/net/ipsec.c
1715
printk("NLMSG_ERROR: %d: %s", req.error, strerror(-req.error));
tools/testing/selftests/net/ipsec.c
1752
printk("ping failed before setting xfrm");
tools/testing/selftests/net/ipsec.c
1762
printk("failed to prepare xfrm");
tools/testing/selftests/net/ipsec.c
1771
printk("failed to set xfrm");
tools/testing/selftests/net/ipsec.c
1778
printk("ping failed for xfrm");
tools/testing/selftests/net/ipsec.c
1791
printk("failed ping to remove xfrm");
tools/testing/selftests/net/ipsec.c
1801
printk("failed ping to cleanup xfrm");
tools/testing/selftests/net/ipsec.c
1818
printk("Failed to open xfrm netlink socket");
tools/testing/selftests/net/ipsec.c
1828
printk("Ack failed");
tools/testing/selftests/net/ipsec.c
1866
printk("Unknown desc type %d", desc.type);
tools/testing/selftests/net/ipsec.c
1903
printk("ping failed before setting xfrm");
tools/testing/selftests/net/ipsec.c
1910
printk("failed to prepare xfrm");
tools/testing/selftests/net/ipsec.c
1916
printk("failed to set xfrm");
tools/testing/selftests/net/ipsec.c
1923
printk("failed to remove xfrm");
tools/testing/selftests/net/ipsec.c
1928
printk("failed to cleanup xfrm");
tools/testing/selftests/net/ipsec.c
1932
printk("got unknown msg type %d", msg->type);
tools/testing/selftests/net/ipsec.c
1946
printk("Failed to open xfrm netlink socket");
tools/testing/selftests/net/ipsec.c
2020
printk("Usage: %s [nr_process]", argv[0]);
tools/testing/selftests/net/ipsec.c
2120
printk("BUG: Specified unknown proto %d", proto);
tools/testing/selftests/net/ipsec.c
2187
printk("close(): %m");
tools/testing/selftests/net/ipsec.c
224
printk("req buf is too small: %zu < %zu", req_sz, nl_size);
tools/testing/selftests/net/ipsec.c
2287
printk("Failed to parse [nr_process]");
tools/testing/selftests/net/ipsec.c
2292
printk("nr_process should be between [1; %u]",
tools/testing/selftests/net/ipsec.c
298
printk("expected NLMSG_ERROR, got %d", (int)answer.hdr.nlmsg_type);
tools/testing/selftests/net/ipsec.c
301
printk("NLMSG_ERROR: %d: %s",
tools/testing/selftests/net/ipsec.c
384
printk("ip addr set %s", addr_str);
tools/testing/selftests/net/ipsec.c
42
#define pr_err(fmt, ...) printk(fmt ": %m", ##__VA_ARGS__)
tools/testing/selftests/net/ipsec.c
471
printk("Failed to set ipv4 addr");
tools/testing/selftests/net/ipsec.c
476
printk("Failed to set ipv4 route");
tools/testing/selftests/net/ipsec.c
495
printk("Failed to open netlink route socket in child");
tools/testing/selftests/net/ipsec.c
500
printk("Failed to set ipv4 addr");
tools/testing/selftests/net/ipsec.c
505
printk("Failed to bring up %s", veth);
tools/testing/selftests/net/ipsec.c
510
printk("Failed to add tunnel route on %s", veth);
tools/testing/selftests/net/ipsec.c
687
printk("send part of the message: %zd/%zu", s_bytes, sizeof(server));
tools/testing/selftests/net/ipsec.c
697
printk("EOF on reply to ping");
tools/testing/selftests/net/ipsec.c
700
printk("ping reply packet is corrupted %zd/%zu", r_bytes, buf_len);
tools/testing/selftests/net/ipsec.c
726
printk("EOF on reply to ping");
tools/testing/selftests/net/ipsec.c
730
printk("ping reply packet is corrupted %zd/%zu", r_bytes, buf_len);
tools/testing/selftests/net/ipsec.c
739
printk("send part of the message: %zd/%zu", s_bytes, sizeof(server));
tools/testing/selftests/net/ipsec.c
757
printk("Failed to init ping");
tools/testing/selftests/net/ipsec.c
793
printk("ping (%s) %s->%s failed %u/%u times",
tools/testing/selftests/net/ipsec.c
800
printk("ping (%s) %s->%s succeeded %u/%u times",
tools/testing/selftests/net/ipsec.c
819
printk("Can't pack a key - too big for buffer");
tools/testing/selftests/net/ipsec.c
854
printk("BUG: buggy ah desc");
tools/testing/selftests/net/ipsec.c
865
printk("BUG: buggy comp desc");
tools/testing/selftests/net/ipsec.c
876
printk("BUG: buggy esp desc");
tools/testing/selftests/net/ipsec.c
904
printk("BUG: unknown proto in desc");
tools/testing/shared/linux/kernel.h
17
#define pr_err printk
tools/testing/shared/linux/kernel.h
18
#define pr_info printk
tools/testing/shared/linux/kernel.h
19
#define pr_debug printk
tools/testing/shared/linux/kernel.h
20
#define pr_cont printk
