// SPDX-License-Identifier: GPL-2.0-only
/******************************************************************************
 *
 * Copyright(c) 2003 - 2011 Intel Corporation. All rights reserved.
 *
 * Portions of this file are derived from the ipw3945 project, as well
 * as portions of the ieee80211 subsystem header files.
 *
 * Contact Information:
 *  Intel Linux Wireless <ilw@linux.intel.com>
 * Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
 *
 *****************************************************************************/

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/sched.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/firmware.h>
#include <linux/etherdevice.h>
#include <linux/if_arp.h>
#include <linux/units.h>

#include <net/mac80211.h>

#include <asm/div64.h>

#define DRV_NAME        "iwl4965"

#include "common.h"
#include "4965.h"

/******************************************************************************
 *
 * module boiler plate
 *
 ******************************************************************************/

/*
 * module name, copyright, version, etc.
 */
#define DRV_DESCRIPTION "Intel(R) Wireless WiFi 4965 driver for Linux"

#ifdef CONFIG_IWLEGACY_DEBUG
#define VD "d"
#else
#define VD
#endif

#define DRV_VERSION     IWLWIFI_VERSION VD

MODULE_DESCRIPTION(DRV_DESCRIPTION);
MODULE_VERSION(DRV_VERSION);
MODULE_AUTHOR(DRV_COPYRIGHT " " DRV_AUTHOR);
MODULE_LICENSE("GPL");
MODULE_ALIAS("iwl4965");

void
il4965_check_abort_status(struct il_priv *il, u8 frame_count, u32 status)
{
        if (frame_count == 1 && status == TX_STATUS_FAIL_RFKILL_FLUSH) {
                IL_ERR("Tx flush command to flush out all frames\n");
                if (!test_bit(S_EXIT_PENDING, &il->status))
                        queue_work(il->workqueue, &il->tx_flush);
        }
}

/*
 * EEPROM
 */
struct il_mod_params il4965_mod_params = {
        .restart_fw = 1,
        /* the rest are 0 by default */
};

void
il4965_rx_queue_reset(struct il_priv *il, struct il_rx_queue *rxq)
{
        unsigned long flags;
        int i;
        spin_lock_irqsave(&rxq->lock, flags);
        INIT_LIST_HEAD(&rxq->rx_free);
        INIT_LIST_HEAD(&rxq->rx_used);
        /* Fill the rx_used queue with _all_ of the Rx buffers */
        for (i = 0; i < RX_FREE_BUFFERS + RX_QUEUE_SIZE; i++) {
                /* In the reset function, these buffers may have been allocated
                 * to an SKB, so we need to unmap and free potential storage */
                if (rxq->pool[i].page != NULL) {
                        dma_unmap_page(&il->pci_dev->dev,
                                       rxq->pool[i].page_dma,
                                       PAGE_SIZE << il->hw_params.rx_page_order,
                                       DMA_FROM_DEVICE);
                        __il_free_pages(il, rxq->pool[i].page);
                        rxq->pool[i].page = NULL;
                }
                list_add_tail(&rxq->pool[i].list, &rxq->rx_used);
        }

        for (i = 0; i < RX_QUEUE_SIZE; i++)
                rxq->queue[i] = NULL;

        /* Set us so that we have processed and used all buffers, but have
         * not restocked the Rx queue with fresh buffers */
        rxq->read = rxq->write = 0;
        rxq->write_actual = 0;
        rxq->free_count = 0;
        spin_unlock_irqrestore(&rxq->lock, flags);
}

int
il4965_rx_init(struct il_priv *il, struct il_rx_queue *rxq)
{
        u32 rb_size;
        const u32 rfdnlog = RX_QUEUE_SIZE_LOG;  /* 256 RBDs */
        u32 rb_timeout = 0;

        if (il->cfg->mod_params->amsdu_size_8K)
                rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_8K;
        else
                rb_size = FH49_RCSR_RX_CONFIG_REG_VAL_RB_SIZE_4K;

        /* Stop Rx DMA */
        il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0);

        /* Reset driver's Rx queue write idx */
        il_wr(il, FH49_RSCSR_CHNL0_RBDCB_WPTR_REG, 0);

        /* Tell device where to find RBD circular buffer in DRAM */
        il_wr(il, FH49_RSCSR_CHNL0_RBDCB_BASE_REG, (u32) (rxq->bd_dma >> 8));

        /* Tell device where in DRAM to update its Rx status */
        il_wr(il, FH49_RSCSR_CHNL0_STTS_WPTR_REG, rxq->rb_stts_dma >> 4);

        /* Enable Rx DMA
         * Direct rx interrupts to hosts
         * Rx buffer size 4 or 8k
         * RB timeout 0x10
         * 256 RBDs
         */
        il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG,
              FH49_RCSR_RX_CONFIG_CHNL_EN_ENABLE_VAL |
              FH49_RCSR_CHNL0_RX_CONFIG_IRQ_DEST_INT_HOST_VAL |
              FH49_RCSR_CHNL0_RX_CONFIG_SINGLE_FRAME_MSK |
              rb_size |
              (rb_timeout << FH49_RCSR_RX_CONFIG_REG_IRQ_RBTH_POS) |
              (rfdnlog << FH49_RCSR_RX_CONFIG_RBDCB_SIZE_POS));

        /* Set interrupt coalescing timer to default (2048 usecs) */
        il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_TIMEOUT_DEF);

        return 0;
}

static void
il4965_set_pwr_vmain(struct il_priv *il)
{
/*
 * (for documentation purposes)
 * to set power to V_AUX, do:

                if (pci_pme_capable(il->pci_dev, PCI_D3cold))
                        il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
                                               APMG_PS_CTRL_VAL_PWR_SRC_VAUX,
                                               ~APMG_PS_CTRL_MSK_PWR_SRC);
 */

        il_set_bits_mask_prph(il, APMG_PS_CTRL_REG,
                              APMG_PS_CTRL_VAL_PWR_SRC_VMAIN,
                              ~APMG_PS_CTRL_MSK_PWR_SRC);
}

int
il4965_hw_nic_init(struct il_priv *il)
{
        unsigned long flags;
        struct il_rx_queue *rxq = &il->rxq;
        int ret;

        spin_lock_irqsave(&il->lock, flags);
        il_apm_init(il);
        /* Set interrupt coalescing calibration timer to default (512 usecs) */
        il_write8(il, CSR_INT_COALESCING, IL_HOST_INT_CALIB_TIMEOUT_DEF);
        spin_unlock_irqrestore(&il->lock, flags);

        il4965_set_pwr_vmain(il);
        il4965_nic_config(il);

        /* Allocate the RX queue, or reset if it is already allocated */
        if (!rxq->bd) {
                ret = il_rx_queue_alloc(il);
                if (ret) {
                        IL_ERR("Unable to initialize Rx queue\n");
                        return -ENOMEM;
                }
        } else
                il4965_rx_queue_reset(il, rxq);

        il4965_rx_replenish(il);

        il4965_rx_init(il, rxq);

        spin_lock_irqsave(&il->lock, flags);

        rxq->need_update = 1;
        il_rx_queue_update_write_ptr(il, rxq);

        spin_unlock_irqrestore(&il->lock, flags);

        /* Allocate or reset and init all Tx and Command queues */
        if (!il->txq) {
                ret = il4965_txq_ctx_alloc(il);
                if (ret)
                        return ret;
        } else
                il4965_txq_ctx_reset(il);

        set_bit(S_INIT, &il->status);

        return 0;
}

/*
 * il4965_dma_addr2rbd_ptr - convert a DMA address to a uCode read buffer ptr
 */
static inline __le32
il4965_dma_addr2rbd_ptr(struct il_priv *il, dma_addr_t dma_addr)
{
        return cpu_to_le32((u32) (dma_addr >> 8));
}

/*
 * il4965_rx_queue_restock - refill RX queue from pre-allocated pool
 *
 * If there are slots in the RX queue that need to be restocked,
 * and we have free pre-allocated buffers, fill the ranks as much
 * as we can, pulling from rx_free.
 *
 * This moves the 'write' idx forward to catch up with 'processed', and
 * also updates the memory address in the firmware to reference the new
 * target buffer.
 */
void
il4965_rx_queue_restock(struct il_priv *il)
{
        struct il_rx_queue *rxq = &il->rxq;
        struct list_head *element;
        struct il_rx_buf *rxb;
        unsigned long flags;

        spin_lock_irqsave(&rxq->lock, flags);
        while (il_rx_queue_space(rxq) > 0 && rxq->free_count) {
                /* The overwritten rxb must be a used one */
                rxb = rxq->queue[rxq->write];
                BUG_ON(rxb && rxb->page);

                /* Get next free Rx buffer, remove from free list */
                element = rxq->rx_free.next;
                rxb = list_entry(element, struct il_rx_buf, list);
                list_del(element);

                /* Point to Rx buffer via next RBD in circular buffer */
                rxq->bd[rxq->write] =
                    il4965_dma_addr2rbd_ptr(il, rxb->page_dma);
                rxq->queue[rxq->write] = rxb;
                rxq->write = (rxq->write + 1) & RX_QUEUE_MASK;
                rxq->free_count--;
        }
        spin_unlock_irqrestore(&rxq->lock, flags);
        /* If the pre-allocated buffer pool is dropping low, schedule to
         * refill it */
        if (rxq->free_count <= RX_LOW_WATERMARK)
                queue_work(il->workqueue, &il->rx_replenish);

        /* If we've added more space for the firmware to place data, tell it.
         * Increment device's write pointer in multiples of 8. */
        if (rxq->write_actual != (rxq->write & ~0x7)) {
                spin_lock_irqsave(&rxq->lock, flags);
                rxq->need_update = 1;
                spin_unlock_irqrestore(&rxq->lock, flags);
                il_rx_queue_update_write_ptr(il, rxq);
        }
}

/*
 * il4965_rx_replenish - Move all used packet from rx_used to rx_free
 *
 * When moving to rx_free an SKB is allocated for the slot.
 *
 * Also restock the Rx queue via il_rx_queue_restock.
 * This is called as a scheduled work item (except for during initialization)
 */
static void
il4965_rx_allocate(struct il_priv *il, gfp_t priority)
{
        struct il_rx_queue *rxq = &il->rxq;
        struct list_head *element;
        struct il_rx_buf *rxb;
        struct page *page;
        dma_addr_t page_dma;
        unsigned long flags;
        gfp_t gfp_mask = priority;

        while (1) {
                spin_lock_irqsave(&rxq->lock, flags);
                if (list_empty(&rxq->rx_used)) {
                        spin_unlock_irqrestore(&rxq->lock, flags);
                        return;
                }
                spin_unlock_irqrestore(&rxq->lock, flags);

                if (rxq->free_count > RX_LOW_WATERMARK)
                        gfp_mask |= __GFP_NOWARN;

                if (il->hw_params.rx_page_order > 0)
                        gfp_mask |= __GFP_COMP;

                /* Alloc a new receive buffer */
                page = alloc_pages(gfp_mask, il->hw_params.rx_page_order);
                if (!page) {
                        if (net_ratelimit())
                                D_INFO("alloc_pages failed, " "order: %d\n",
                                       il->hw_params.rx_page_order);

                        if (rxq->free_count <= RX_LOW_WATERMARK &&
                            net_ratelimit())
                                IL_ERR("Failed to alloc_pages with %s. "
                                       "Only %u free buffers remaining.\n",
                                       priority ==
                                       GFP_ATOMIC ? "GFP_ATOMIC" : "GFP_KERNEL",
                                       rxq->free_count);
                        /* We don't reschedule replenish work here -- we will
                         * call the restock method and if it still needs
                         * more buffers it will schedule replenish */
                        return;
                }

                /* Get physical address of the RB */
                page_dma = dma_map_page(&il->pci_dev->dev, page, 0,
                                        PAGE_SIZE << il->hw_params.rx_page_order,
                                        DMA_FROM_DEVICE);
                if (unlikely(dma_mapping_error(&il->pci_dev->dev, page_dma))) {
                        __free_pages(page, il->hw_params.rx_page_order);
                        break;
                }

                spin_lock_irqsave(&rxq->lock, flags);

                if (list_empty(&rxq->rx_used)) {
                        spin_unlock_irqrestore(&rxq->lock, flags);
                        dma_unmap_page(&il->pci_dev->dev, page_dma,
                                       PAGE_SIZE << il->hw_params.rx_page_order,
                                       DMA_FROM_DEVICE);
                        __free_pages(page, il->hw_params.rx_page_order);
                        return;
                }

                element = rxq->rx_used.next;
                rxb = list_entry(element, struct il_rx_buf, list);
                list_del(element);

                BUG_ON(rxb->page);

                rxb->page = page;
                rxb->page_dma = page_dma;
                list_add_tail(&rxb->list, &rxq->rx_free);
                rxq->free_count++;
                il->alloc_rxb_page++;

                spin_unlock_irqrestore(&rxq->lock, flags);
        }
}

void
il4965_rx_replenish(struct il_priv *il)
{
        unsigned long flags;

        il4965_rx_allocate(il, GFP_KERNEL);

        spin_lock_irqsave(&il->lock, flags);
        il4965_rx_queue_restock(il);
        spin_unlock_irqrestore(&il->lock, flags);
}

void
il4965_rx_replenish_now(struct il_priv *il)
{
        il4965_rx_allocate(il, GFP_ATOMIC);

        il4965_rx_queue_restock(il);
}

/* Assumes that the skb field of the buffers in 'pool' is kept accurate.
 * If an SKB has been detached, the POOL needs to have its SKB set to NULL
 * This free routine walks the list of POOL entries and if SKB is set to
 * non NULL it is unmapped and freed
 */
void
il4965_rx_queue_free(struct il_priv *il, struct il_rx_queue *rxq)
{
        int i;
        for (i = 0; i < RX_QUEUE_SIZE + RX_FREE_BUFFERS; i++) {
                if (rxq->pool[i].page != NULL) {
                        dma_unmap_page(&il->pci_dev->dev,
                                       rxq->pool[i].page_dma,
                                       PAGE_SIZE << il->hw_params.rx_page_order,
                                       DMA_FROM_DEVICE);
                        __il_free_pages(il, rxq->pool[i].page);
                        rxq->pool[i].page = NULL;
                }
        }

        dma_free_coherent(&il->pci_dev->dev, 4 * RX_QUEUE_SIZE, rxq->bd,
                          rxq->bd_dma);
        dma_free_coherent(&il->pci_dev->dev, sizeof(struct il_rb_status),
                          rxq->rb_stts, rxq->rb_stts_dma);
        rxq->bd = NULL;
        rxq->rb_stts = NULL;
}

int
il4965_rxq_stop(struct il_priv *il)
{
        int ret;

        _il_wr(il, FH49_MEM_RCSR_CHNL0_CONFIG_REG, 0);
        ret = _il_poll_bit(il, FH49_MEM_RSSR_RX_STATUS_REG,
                           FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
                           FH49_RSSR_CHNL0_RX_STATUS_CHNL_IDLE,
                           1000);
        if (ret < 0)
                IL_ERR("Can't stop Rx DMA.\n");

        return 0;
}

int
il4965_hwrate_to_mac80211_idx(u32 rate_n_flags, enum nl80211_band band)
{
        int idx = 0;
        int band_offset = 0;

        /* HT rate format: mac80211 wants an MCS number, which is just LSB */
        if (rate_n_flags & RATE_MCS_HT_MSK) {
                idx = (rate_n_flags & 0xff);
                return idx;
                /* Legacy rate format, search for match in table */
        } else {
                if (band == NL80211_BAND_5GHZ)
                        band_offset = IL_FIRST_OFDM_RATE;
                for (idx = band_offset; idx < RATE_COUNT_LEGACY; idx++)
                        if (il_rates[idx].plcp == (rate_n_flags & 0xFF))
                                return idx - band_offset;
        }

        return -1;
}

static int
il4965_calc_rssi(struct il_priv *il, struct il_rx_phy_res *rx_resp)
{
        /* data from PHY/DSP regarding signal strength, etc.,
         *   contents are always there, not configurable by host.  */
        struct il4965_rx_non_cfg_phy *ncphy =
            (struct il4965_rx_non_cfg_phy *)rx_resp->non_cfg_phy_buf;
        u32 agc =
            (le16_to_cpu(ncphy->agc_info) & IL49_AGC_DB_MASK) >>
            IL49_AGC_DB_POS;

        u32 valid_antennae =
            (le16_to_cpu(rx_resp->phy_flags) & IL49_RX_PHY_FLAGS_ANTENNAE_MASK)
            >> IL49_RX_PHY_FLAGS_ANTENNAE_OFFSET;
        u8 max_rssi = 0;
        u32 i;

        /* Find max rssi among 3 possible receivers.
         * These values are measured by the digital signal processor (DSP).
         * They should stay fairly constant even as the signal strength varies,
         *   if the radio's automatic gain control (AGC) is working right.
         * AGC value (see below) will provide the "interesting" info. */
        for (i = 0; i < 3; i++)
                if (valid_antennae & (1 << i))
                        max_rssi = max(ncphy->rssi_info[i << 1], max_rssi);

        D_STATS("Rssi In A %d B %d C %d Max %d AGC dB %d\n",
                ncphy->rssi_info[0], ncphy->rssi_info[2], ncphy->rssi_info[4],
                max_rssi, agc);

        /* dBm = max_rssi dB - agc dB - constant.
         * Higher AGC (higher radio gain) means lower signal. */
        return max_rssi - agc - IL4965_RSSI_OFFSET;
}

static u32
il4965_translate_rx_status(struct il_priv *il, u32 decrypt_in)
{
        u32 decrypt_out = 0;

        if ((decrypt_in & RX_RES_STATUS_STATION_FOUND) ==
            RX_RES_STATUS_STATION_FOUND)
                decrypt_out |=
                    (RX_RES_STATUS_STATION_FOUND |
                     RX_RES_STATUS_NO_STATION_INFO_MISMATCH);

        decrypt_out |= (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK);

        /* packet was not encrypted */
        if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
            RX_RES_STATUS_SEC_TYPE_NONE)
                return decrypt_out;

        /* packet was encrypted with unknown alg */
        if ((decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) ==
            RX_RES_STATUS_SEC_TYPE_ERR)
                return decrypt_out;

        /* decryption was not done in HW */
        if ((decrypt_in & RX_MPDU_RES_STATUS_DEC_DONE_MSK) !=
            RX_MPDU_RES_STATUS_DEC_DONE_MSK)
                return decrypt_out;

        switch (decrypt_in & RX_RES_STATUS_SEC_TYPE_MSK) {

        case RX_RES_STATUS_SEC_TYPE_CCMP:
                /* alg is CCM: check MIC only */
                if (!(decrypt_in & RX_MPDU_RES_STATUS_MIC_OK))
                        /* Bad MIC */
                        decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
                else
                        decrypt_out |= RX_RES_STATUS_DECRYPT_OK;

                break;

        case RX_RES_STATUS_SEC_TYPE_TKIP:
                if (!(decrypt_in & RX_MPDU_RES_STATUS_TTAK_OK)) {
                        /* Bad TTAK */
                        decrypt_out |= RX_RES_STATUS_BAD_KEY_TTAK;
                        break;
                }
                fallthrough;    /* if TTAK OK */
        default:
                if (!(decrypt_in & RX_MPDU_RES_STATUS_ICV_OK))
                        decrypt_out |= RX_RES_STATUS_BAD_ICV_MIC;
                else
                        decrypt_out |= RX_RES_STATUS_DECRYPT_OK;
                break;
        }

        D_RX("decrypt_in:0x%x  decrypt_out = 0x%x\n", decrypt_in, decrypt_out);

        return decrypt_out;
}

#define SMALL_PACKET_SIZE 256

static void
il4965_pass_packet_to_mac80211(struct il_priv *il, struct ieee80211_hdr *hdr,
                               u32 len, u32 ampdu_status, struct il_rx_buf *rxb,
                               struct ieee80211_rx_status *stats)
{
        struct sk_buff *skb;
        __le16 fc = hdr->frame_control;

        /* We only process data packets if the interface is open */
        if (unlikely(!il->is_open)) {
                D_DROP("Dropping packet while interface is not open.\n");
                return;
        }

        if (unlikely(test_bit(IL_STOP_REASON_PASSIVE, &il->stop_reason))) {
                il_wake_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
                D_INFO("Woke queues - frame received on passive channel\n");
        }

        /* In case of HW accelerated crypto and bad decryption, drop */
        if (!il->cfg->mod_params->sw_crypto &&
            il_set_decrypted_flag(il, hdr, ampdu_status, stats))
                return;

        skb = dev_alloc_skb(SMALL_PACKET_SIZE);
        if (!skb) {
                IL_ERR("dev_alloc_skb failed\n");
                return;
        }

        if (len <= SMALL_PACKET_SIZE) {
                skb_put_data(skb, hdr, len);
        } else {
                skb_add_rx_frag(skb, 0, rxb->page, (void *)hdr - rxb_addr(rxb),
                                len, PAGE_SIZE << il->hw_params.rx_page_order);
                il->alloc_rxb_page--;
                rxb->page = NULL;
        }

        il_update_stats(il, false, fc, len);
        memcpy(IEEE80211_SKB_RXCB(skb), stats, sizeof(*stats));

        ieee80211_rx(il->hw, skb);
}

/* Called for N_RX (legacy ABG frames), or
 * N_RX_MPDU (HT high-throughput N frames). */
static void
il4965_hdl_rx(struct il_priv *il, struct il_rx_buf *rxb)
{
        struct ieee80211_hdr *header;
        struct ieee80211_rx_status rx_status = {};
        struct il_rx_pkt *pkt = rxb_addr(rxb);
        struct il_rx_phy_res *phy_res;
        __le32 rx_pkt_status;
        struct il_rx_mpdu_res_start *amsdu;
        u32 len;
        u32 ampdu_status;
        u32 rate_n_flags;

        /**
         * N_RX and N_RX_MPDU are handled differently.
         *      N_RX: physical layer info is in this buffer
         *      N_RX_MPDU: physical layer info was sent in separate
         *              command and cached in il->last_phy_res
         *
         * Here we set up local variables depending on which command is
         * received.
         */
        if (pkt->hdr.cmd == N_RX) {
                phy_res = (struct il_rx_phy_res *)pkt->u.raw;
                header =
                    (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*phy_res) +
                                             phy_res->cfg_phy_cnt);

                len = le16_to_cpu(phy_res->byte_count);
                rx_pkt_status =
                    *(__le32 *) (pkt->u.raw + sizeof(*phy_res) +
                                 phy_res->cfg_phy_cnt + len);
                ampdu_status = le32_to_cpu(rx_pkt_status);
        } else {
                if (!il->_4965.last_phy_res_valid) {
                        IL_ERR("MPDU frame without cached PHY data\n");
                        return;
                }
                phy_res = &il->_4965.last_phy_res;
                amsdu = (struct il_rx_mpdu_res_start *)pkt->u.raw;
                header = (struct ieee80211_hdr *)(pkt->u.raw + sizeof(*amsdu));
                len = le16_to_cpu(amsdu->byte_count);
                rx_pkt_status = *(__le32 *) (pkt->u.raw + sizeof(*amsdu) + len);
                ampdu_status =
                    il4965_translate_rx_status(il, le32_to_cpu(rx_pkt_status));
        }

        if ((unlikely(phy_res->cfg_phy_cnt > 20))) {
                D_DROP("dsp size out of range [0,20]: %d\n",
                       phy_res->cfg_phy_cnt);
                return;
        }

        if (!(rx_pkt_status & RX_RES_STATUS_NO_CRC32_ERROR) ||
            !(rx_pkt_status & RX_RES_STATUS_NO_RXE_OVERFLOW)) {
                D_RX("Bad CRC or FIFO: 0x%08X.\n", le32_to_cpu(rx_pkt_status));
                return;
        }

        /* This will be used in several places later */
        rate_n_flags = le32_to_cpu(phy_res->rate_n_flags);

        /* rx_status carries information about the packet to mac80211 */
        rx_status.mactime = le64_to_cpu(phy_res->timestamp);
        rx_status.band =
            (phy_res->
             phy_flags & RX_RES_PHY_FLAGS_BAND_24_MSK) ? NL80211_BAND_2GHZ :
            NL80211_BAND_5GHZ;
        rx_status.freq =
            ieee80211_channel_to_frequency(le16_to_cpu(phy_res->channel),
                                           rx_status.band);
        rx_status.rate_idx =
            il4965_hwrate_to_mac80211_idx(rate_n_flags, rx_status.band);
        rx_status.flag = 0;

        /* TSF isn't reliable. In order to allow smooth user experience,
         * this W/A doesn't propagate it to the mac80211 */
        /*rx_status.flag |= RX_FLAG_MACTIME_START; */

        il->ucode_beacon_time = le32_to_cpu(phy_res->beacon_time_stamp);

        /* Find max signal strength (dBm) among 3 antenna/receiver chains */
        rx_status.signal = il4965_calc_rssi(il, phy_res);

        D_STATS("Rssi %d, TSF %llu\n", rx_status.signal,
                (unsigned long long)rx_status.mactime);

        /*
         * "antenna number"
         *
         * It seems that the antenna field in the phy flags value
         * is actually a bit field. This is undefined by radiotap,
         * it wants an actual antenna number but I always get "7"
         * for most legacy frames I receive indicating that the
         * same frame was received on all three RX chains.
         *
         * I think this field should be removed in favor of a
         * new 802.11n radiotap field "RX chains" that is defined
         * as a bitmask.
         */
        rx_status.antenna =
            (le16_to_cpu(phy_res->phy_flags) & RX_RES_PHY_FLAGS_ANTENNA_MSK) >>
            RX_RES_PHY_FLAGS_ANTENNA_POS;

        /* set the preamble flag if appropriate */
        if (phy_res->phy_flags & RX_RES_PHY_FLAGS_SHORT_PREAMBLE_MSK)
                rx_status.enc_flags |= RX_ENC_FLAG_SHORTPRE;

        /* Set up the HT phy flags */
        if (rate_n_flags & RATE_MCS_HT_MSK)
                rx_status.encoding = RX_ENC_HT;
        if (rate_n_flags & RATE_MCS_HT40_MSK)
                rx_status.bw = RATE_INFO_BW_40;
        else
                rx_status.bw = RATE_INFO_BW_20;
        if (rate_n_flags & RATE_MCS_SGI_MSK)
                rx_status.enc_flags |= RX_ENC_FLAG_SHORT_GI;

        if (phy_res->phy_flags & RX_RES_PHY_FLAGS_AGG_MSK) {
                /* We know which subframes of an A-MPDU belong
                 * together since we get a single PHY response
                 * from the firmware for all of them.
                 */

                rx_status.flag |= RX_FLAG_AMPDU_DETAILS;
                rx_status.ampdu_reference = il->_4965.ampdu_ref;
        }

        il4965_pass_packet_to_mac80211(il, header, len, ampdu_status, rxb,
                                       &rx_status);
}

/* Cache phy data (Rx signal strength, etc) for HT frame (N_RX_PHY).
 * This will be used later in il_hdl_rx() for N_RX_MPDU. */
static void
il4965_hdl_rx_phy(struct il_priv *il, struct il_rx_buf *rxb)
{
        struct il_rx_pkt *pkt = rxb_addr(rxb);
        il->_4965.last_phy_res_valid = true;
        il->_4965.ampdu_ref++;
        memcpy(&il->_4965.last_phy_res, pkt->u.raw,
               sizeof(struct il_rx_phy_res));
}

static int
il4965_get_channels_for_scan(struct il_priv *il, struct ieee80211_vif *vif,
                             enum nl80211_band band, u8 is_active,
                             u8 n_probes, struct il_scan_channel *scan_ch)
{
        struct ieee80211_channel *chan;
        const struct ieee80211_supported_band *sband;
        const struct il_channel_info *ch_info;
        u16 passive_dwell = 0;
        u16 active_dwell = 0;
        int added, i;
        u16 channel;

        sband = il_get_hw_mode(il, band);
        if (!sband)
                return 0;

        active_dwell = il_get_active_dwell_time(il, band, n_probes);
        passive_dwell = il_get_passive_dwell_time(il, band, vif);

        if (passive_dwell <= active_dwell)
                passive_dwell = active_dwell + 1;

        for (i = 0, added = 0; i < il->scan_request->n_channels; i++) {
                chan = il->scan_request->channels[i];

                if (chan->band != band)
                        continue;

                channel = chan->hw_value;
                scan_ch->channel = cpu_to_le16(channel);

                ch_info = il_get_channel_info(il, band, channel);
                if (!il_is_channel_valid(ch_info)) {
                        D_SCAN("Channel %d is INVALID for this band.\n",
                               channel);
                        continue;
                }

                if (!is_active || il_is_channel_passive(ch_info) ||
                    (chan->flags & IEEE80211_CHAN_NO_IR))
                        scan_ch->type = SCAN_CHANNEL_TYPE_PASSIVE;
                else
                        scan_ch->type = SCAN_CHANNEL_TYPE_ACTIVE;

                if (n_probes)
                        scan_ch->type |= IL_SCAN_PROBE_MASK(n_probes);

                scan_ch->active_dwell = cpu_to_le16(active_dwell);
                scan_ch->passive_dwell = cpu_to_le16(passive_dwell);

                /* Set txpower levels to defaults */
                scan_ch->dsp_atten = 110;

                /* NOTE: if we were doing 6Mb OFDM for scans we'd use
                 * power level:
                 * scan_ch->tx_gain = ((1 << 5) | (2 << 3)) | 3;
                 */
                if (band == NL80211_BAND_5GHZ)
                        scan_ch->tx_gain = ((1 << 5) | (3 << 3)) | 3;
                else
                        scan_ch->tx_gain = ((1 << 5) | (5 << 3));

                D_SCAN("Scanning ch=%d prob=0x%X [%s %d]\n", channel,
                       le32_to_cpu(scan_ch->type),
                       (scan_ch->
                        type & SCAN_CHANNEL_TYPE_ACTIVE) ? "ACTIVE" : "PASSIVE",
                       (scan_ch->
                        type & SCAN_CHANNEL_TYPE_ACTIVE) ? active_dwell :
                       passive_dwell);

                scan_ch++;
                added++;
        }

        D_SCAN("total channels to scan %d\n", added);
        return added;
}

static void
il4965_toggle_tx_ant(struct il_priv *il, u8 *ant, u8 valid)
{
        int i;
        u8 ind = *ant;

        for (i = 0; i < RATE_ANT_NUM - 1; i++) {
                ind = (ind + 1) < RATE_ANT_NUM ? ind + 1 : 0;
                if (valid & BIT(ind)) {
                        *ant = ind;
                        return;
                }
        }
}

int
il4965_request_scan(struct il_priv *il, struct ieee80211_vif *vif)
{
        struct il_host_cmd cmd = {
                .id = C_SCAN,
                .len = sizeof(struct il_scan_cmd),
                .flags = CMD_SIZE_HUGE,
        };
        struct il_scan_cmd *scan;
        u32 rate_flags = 0;
        u16 cmd_len;
        u16 rx_chain = 0;
        enum nl80211_band band;
        u8 n_probes = 0;
        u8 rx_ant = il->hw_params.valid_rx_ant;
        u8 rate;
        bool is_active = false;
        int chan_mod;
        u8 active_chains;
        u8 scan_tx_antennas = il->hw_params.valid_tx_ant;
        int ret;

        lockdep_assert_held(&il->mutex);

        if (!il->scan_cmd) {
                il->scan_cmd =
                    kmalloc(sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE,
                            GFP_KERNEL);
                if (!il->scan_cmd) {
                        D_SCAN("fail to allocate memory for scan\n");
                        return -ENOMEM;
                }
        }
        scan = il->scan_cmd;
        memset(scan, 0, sizeof(struct il_scan_cmd) + IL_MAX_SCAN_SIZE);

        scan->quiet_plcp_th = IL_PLCP_QUIET_THRESH;
        scan->quiet_time = IL_ACTIVE_QUIET_TIME;

        if (il_is_any_associated(il)) {
                u16 interval;
                u32 extra;
                u32 suspend_time = 100;
                u32 scan_suspend_time = 100;

                D_INFO("Scanning while associated...\n");
                interval = vif->bss_conf.beacon_int;

                scan->suspend_time = 0;
                scan->max_out_time = cpu_to_le32(200 * 1024);
                if (!interval)
                        interval = suspend_time;

                extra = (suspend_time / interval) << 22;
                scan_suspend_time =
                    (extra | ((suspend_time % interval) * 1024));
                scan->suspend_time = cpu_to_le32(scan_suspend_time);
                D_SCAN("suspend_time 0x%X beacon interval %d\n",
                       scan_suspend_time, interval);
        }

        if (il->scan_request->n_ssids) {
                int i, p = 0;
                D_SCAN("Kicking off active scan\n");
                for (i = 0; i < il->scan_request->n_ssids; i++) {
                        /* always does wildcard anyway */
                        if (!il->scan_request->ssids[i].ssid_len)
                                continue;
                        scan->direct_scan[p].id = WLAN_EID_SSID;
                        scan->direct_scan[p].len =
                            il->scan_request->ssids[i].ssid_len;
                        memcpy(scan->direct_scan[p].ssid,
                               il->scan_request->ssids[i].ssid,
                               il->scan_request->ssids[i].ssid_len);
                        n_probes++;
                        p++;
                }
                is_active = true;
        } else
                D_SCAN("Start passive scan.\n");

        scan->tx_cmd.tx_flags = TX_CMD_FLG_SEQ_CTL_MSK;
        scan->tx_cmd.sta_id = il->hw_params.bcast_id;
        scan->tx_cmd.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;

        switch (il->scan_band) {
        case NL80211_BAND_2GHZ:
                scan->flags = RXON_FLG_BAND_24G_MSK | RXON_FLG_AUTO_DETECT_MSK;
                chan_mod =
                    le32_to_cpu(il->active.flags & RXON_FLG_CHANNEL_MODE_MSK) >>
                    RXON_FLG_CHANNEL_MODE_POS;
                if (chan_mod == CHANNEL_MODE_PURE_40) {
                        rate = RATE_6M_PLCP;
                } else {
                        rate = RATE_1M_PLCP;
                        rate_flags = RATE_MCS_CCK_MSK;
                }
                break;
        case NL80211_BAND_5GHZ:
                rate = RATE_6M_PLCP;
                break;
        default:
                IL_WARN("Invalid scan band\n");
                return -EIO;
        }

        /*
         * If active scanning is requested but a certain channel is
         * marked passive, we can do active scanning if we detect
         * transmissions.
         *
         * There is an issue with some firmware versions that triggers
         * a sysassert on a "good CRC threshold" of zero (== disabled),
         * on a radar channel even though this means that we should NOT
         * send probes.
         *
         * The "good CRC threshold" is the number of frames that we
         * need to receive during our dwell time on a channel before
         * sending out probes -- setting this to a huge value will
         * mean we never reach it, but at the same time work around
         * the aforementioned issue. Thus use IL_GOOD_CRC_TH_NEVER
         * here instead of IL_GOOD_CRC_TH_DISABLED.
         */
        scan->good_CRC_th =
            is_active ? IL_GOOD_CRC_TH_DEFAULT : IL_GOOD_CRC_TH_NEVER;

        band = il->scan_band;

        if (il->cfg->scan_rx_antennas[band])
                rx_ant = il->cfg->scan_rx_antennas[band];

        il4965_toggle_tx_ant(il, &il->scan_tx_ant[band], scan_tx_antennas);
        rate_flags |= BIT(il->scan_tx_ant[band]) << RATE_MCS_ANT_POS;
        scan->tx_cmd.rate_n_flags = cpu_to_le32(rate | rate_flags);

        /* In power save mode use one chain, otherwise use all chains */
        if (test_bit(S_POWER_PMI, &il->status)) {
                /* rx_ant has been set to all valid chains previously */
                active_chains =
                    rx_ant & ((u8) (il->chain_noise_data.active_chains));
                if (!active_chains)
                        active_chains = rx_ant;

                D_SCAN("chain_noise_data.active_chains: %u\n",
                       il->chain_noise_data.active_chains);

                rx_ant = il4965_first_antenna(active_chains);
        }

        /* MIMO is not used here, but value is required */
        rx_chain |= il->hw_params.valid_rx_ant << RXON_RX_CHAIN_VALID_POS;
        rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_MIMO_SEL_POS;
        rx_chain |= rx_ant << RXON_RX_CHAIN_FORCE_SEL_POS;
        rx_chain |= 0x1 << RXON_RX_CHAIN_DRIVER_FORCE_POS;
        scan->rx_chain = cpu_to_le16(rx_chain);

        cmd_len =
            il_fill_probe_req(il, (struct ieee80211_mgmt *)scan->data,
                              vif->addr, il->scan_request->ie,
                              il->scan_request->ie_len,
                              IL_MAX_SCAN_SIZE - sizeof(*scan));
        scan->tx_cmd.len = cpu_to_le16(cmd_len);

        scan->filter_flags |=
            (RXON_FILTER_ACCEPT_GRP_MSK | RXON_FILTER_BCON_AWARE_MSK);

        scan->channel_count =
            il4965_get_channels_for_scan(il, vif, band, is_active, n_probes,
                                         (void *)&scan->data[cmd_len]);
        if (scan->channel_count == 0) {
                D_SCAN("channel count %d\n", scan->channel_count);
                return -EIO;
        }

        cmd.len +=
            le16_to_cpu(scan->tx_cmd.len) +
            scan->channel_count * sizeof(struct il_scan_channel);
        cmd.data = scan;
        scan->len = cpu_to_le16(cmd.len);

        set_bit(S_SCAN_HW, &il->status);

        ret = il_send_cmd_sync(il, &cmd);
        if (ret)
                clear_bit(S_SCAN_HW, &il->status);

        return ret;
}

int
il4965_manage_ibss_station(struct il_priv *il, struct ieee80211_vif *vif,
                           bool add)
{
        struct il_vif_priv *vif_priv = (void *)vif->drv_priv;

        if (add)
                return il4965_add_bssid_station(il, vif->bss_conf.bssid,
                                                &vif_priv->ibss_bssid_sta_id);
        return il_remove_station(il, vif_priv->ibss_bssid_sta_id,
                                 vif->bss_conf.bssid);
}

void
il4965_free_tfds_in_queue(struct il_priv *il, int sta_id, int tid, int freed)
{
        lockdep_assert_held(&il->sta_lock);

        if (il->stations[sta_id].tid[tid].tfds_in_queue >= freed)
                il->stations[sta_id].tid[tid].tfds_in_queue -= freed;
        else {
                D_TX("free more than tfds_in_queue (%u:%d)\n",
                     il->stations[sta_id].tid[tid].tfds_in_queue, freed);
                il->stations[sta_id].tid[tid].tfds_in_queue = 0;
        }
}

#define IL_TX_QUEUE_MSK 0xfffff

static bool
il4965_is_single_rx_stream(struct il_priv *il)
{
        return il->current_ht_config.smps == IEEE80211_SMPS_STATIC ||
            il->current_ht_config.single_chain_sufficient;
}

#define IL_NUM_RX_CHAINS_MULTIPLE       3
#define IL_NUM_RX_CHAINS_SINGLE 2
#define IL_NUM_IDLE_CHAINS_DUAL 2
#define IL_NUM_IDLE_CHAINS_SINGLE       1

/*
 * Determine how many receiver/antenna chains to use.
 *
 * More provides better reception via diversity.  Fewer saves power
 * at the expense of throughput, but only when not in powersave to
 * start with.
 *
 * MIMO (dual stream) requires at least 2, but works better with 3.
 * This does not determine *which* chains to use, just how many.
 */
static int
il4965_get_active_rx_chain_count(struct il_priv *il)
{
        /* # of Rx chains to use when expecting MIMO. */
        if (il4965_is_single_rx_stream(il))
                return IL_NUM_RX_CHAINS_SINGLE;
        else
                return IL_NUM_RX_CHAINS_MULTIPLE;
}

/*
 * When we are in power saving mode, unless device support spatial
 * multiplexing power save, use the active count for rx chain count.
 */
static int
il4965_get_idle_rx_chain_count(struct il_priv *il, int active_cnt)
{
        /* # Rx chains when idling, depending on SMPS mode */
        switch (il->current_ht_config.smps) {
        case IEEE80211_SMPS_STATIC:
        case IEEE80211_SMPS_DYNAMIC:
                return IL_NUM_IDLE_CHAINS_SINGLE;
        case IEEE80211_SMPS_OFF:
                return active_cnt;
        default:
                WARN(1, "invalid SMPS mode %d", il->current_ht_config.smps);
                return active_cnt;
        }
}

/* up to 4 chains */
static u8
il4965_count_chain_bitmap(u32 chain_bitmap)
{
        u8 res;
        res = (chain_bitmap & BIT(0)) >> 0;
        res += (chain_bitmap & BIT(1)) >> 1;
        res += (chain_bitmap & BIT(2)) >> 2;
        res += (chain_bitmap & BIT(3)) >> 3;
        return res;
}

/*
 * il4965_set_rxon_chain - Set up Rx chain usage in "staging" RXON image
 *
 * Selects how many and which Rx receivers/antennas/chains to use.
 * This should not be used for scan command ... it puts data in wrong place.
 */
void
il4965_set_rxon_chain(struct il_priv *il)
{
        bool is_single = il4965_is_single_rx_stream(il);
        bool is_cam = !test_bit(S_POWER_PMI, &il->status);
        u8 idle_rx_cnt, active_rx_cnt, valid_rx_cnt;
        u32 active_chains;
        u16 rx_chain;

        /* Tell uCode which antennas are actually connected.
         * Before first association, we assume all antennas are connected.
         * Just after first association, il4965_chain_noise_calibration()
         *    checks which antennas actually *are* connected. */
        if (il->chain_noise_data.active_chains)
                active_chains = il->chain_noise_data.active_chains;
        else
                active_chains = il->hw_params.valid_rx_ant;

        rx_chain = active_chains << RXON_RX_CHAIN_VALID_POS;

        /* How many receivers should we use? */
        active_rx_cnt = il4965_get_active_rx_chain_count(il);
        idle_rx_cnt = il4965_get_idle_rx_chain_count(il, active_rx_cnt);

        /* correct rx chain count according hw settings
         * and chain noise calibration
         */
        valid_rx_cnt = il4965_count_chain_bitmap(active_chains);
        if (valid_rx_cnt < active_rx_cnt)
                active_rx_cnt = valid_rx_cnt;

        if (valid_rx_cnt < idle_rx_cnt)
                idle_rx_cnt = valid_rx_cnt;

        rx_chain |= active_rx_cnt << RXON_RX_CHAIN_MIMO_CNT_POS;
        rx_chain |= idle_rx_cnt << RXON_RX_CHAIN_CNT_POS;

        il->staging.rx_chain = cpu_to_le16(rx_chain);

        if (!is_single && active_rx_cnt >= IL_NUM_RX_CHAINS_SINGLE && is_cam)
                il->staging.rx_chain |= RXON_RX_CHAIN_MIMO_FORCE_MSK;
        else
                il->staging.rx_chain &= ~RXON_RX_CHAIN_MIMO_FORCE_MSK;

        D_ASSOC("rx_chain=0x%X active=%d idle=%d\n", il->staging.rx_chain,
                active_rx_cnt, idle_rx_cnt);

        WARN_ON(active_rx_cnt == 0 || idle_rx_cnt == 0 ||
                active_rx_cnt < idle_rx_cnt);
}

static const char *
il4965_get_fh_string(int cmd)
{
        switch (cmd) {
                IL_CMD(FH49_RSCSR_CHNL0_STTS_WPTR_REG);
                IL_CMD(FH49_RSCSR_CHNL0_RBDCB_BASE_REG);
                IL_CMD(FH49_RSCSR_CHNL0_WPTR);
                IL_CMD(FH49_MEM_RCSR_CHNL0_CONFIG_REG);
                IL_CMD(FH49_MEM_RSSR_SHARED_CTRL_REG);
                IL_CMD(FH49_MEM_RSSR_RX_STATUS_REG);
                IL_CMD(FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV);
                IL_CMD(FH49_TSSR_TX_STATUS_REG);
                IL_CMD(FH49_TSSR_TX_ERROR_REG);
        default:
                return "UNKNOWN";
        }
}

int
il4965_dump_fh(struct il_priv *il, char **buf, bool display)
{
        int i;
#ifdef CONFIG_IWLEGACY_DEBUG
        int pos = 0;
        size_t bufsz = 0;
#endif
        static const u32 fh_tbl[] = {
                FH49_RSCSR_CHNL0_STTS_WPTR_REG,
                FH49_RSCSR_CHNL0_RBDCB_BASE_REG,
                FH49_RSCSR_CHNL0_WPTR,
                FH49_MEM_RCSR_CHNL0_CONFIG_REG,
                FH49_MEM_RSSR_SHARED_CTRL_REG,
                FH49_MEM_RSSR_RX_STATUS_REG,
                FH49_MEM_RSSR_RX_ENABLE_ERR_IRQ2DRV,
                FH49_TSSR_TX_STATUS_REG,
                FH49_TSSR_TX_ERROR_REG
        };
#ifdef CONFIG_IWLEGACY_DEBUG
        if (display) {
                bufsz = ARRAY_SIZE(fh_tbl) * 48 + 40;
                *buf = kmalloc(bufsz, GFP_KERNEL);
                if (!*buf)
                        return -ENOMEM;
                pos +=
                    scnprintf(*buf + pos, bufsz - pos, "FH register values:\n");
                for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
                        pos +=
                            scnprintf(*buf + pos, bufsz - pos,
                                      "  %34s: 0X%08x\n",
                                      il4965_get_fh_string(fh_tbl[i]),
                                      il_rd(il, fh_tbl[i]));
                }
                return pos;
        }
#endif
        IL_ERR("FH register values:\n");
        for (i = 0; i < ARRAY_SIZE(fh_tbl); i++) {
                IL_ERR("  %34s: 0X%08x\n", il4965_get_fh_string(fh_tbl[i]),
                       il_rd(il, fh_tbl[i]));
        }
        return 0;
}

static void
il4965_hdl_missed_beacon(struct il_priv *il, struct il_rx_buf *rxb)
{
        struct il_rx_pkt *pkt = rxb_addr(rxb);
        struct il_missed_beacon_notif *missed_beacon;

        missed_beacon = &pkt->u.missed_beacon;
        if (le32_to_cpu(missed_beacon->consecutive_missed_beacons) >
            il->missed_beacon_threshold) {
                D_CALIB("missed bcn cnsq %d totl %d rcd %d expctd %d\n",
                        le32_to_cpu(missed_beacon->consecutive_missed_beacons),
                        le32_to_cpu(missed_beacon->total_missed_becons),
                        le32_to_cpu(missed_beacon->num_recvd_beacons),
                        le32_to_cpu(missed_beacon->num_expected_beacons));
                if (!test_bit(S_SCANNING, &il->status))
                        il4965_init_sensitivity(il);
        }
}

/* Calculate noise level, based on measurements during network silence just
 *   before arriving beacon.  This measurement can be done only if we know
 *   exactly when to expect beacons, therefore only when we're associated. */
static void
il4965_rx_calc_noise(struct il_priv *il)
{
        struct stats_rx_non_phy *rx_info;
        int num_active_rx = 0;
        int total_silence = 0;
        int bcn_silence_a, bcn_silence_b, bcn_silence_c;
        int last_rx_noise;

        rx_info = &(il->_4965.stats.rx.general);
        bcn_silence_a =
            le32_to_cpu(rx_info->beacon_silence_rssi_a) & IN_BAND_FILTER;
        bcn_silence_b =
            le32_to_cpu(rx_info->beacon_silence_rssi_b) & IN_BAND_FILTER;
        bcn_silence_c =
            le32_to_cpu(rx_info->beacon_silence_rssi_c) & IN_BAND_FILTER;

        if (bcn_silence_a) {
                total_silence += bcn_silence_a;
                num_active_rx++;
        }
        if (bcn_silence_b) {
                total_silence += bcn_silence_b;
                num_active_rx++;
        }
        if (bcn_silence_c) {
                total_silence += bcn_silence_c;
                num_active_rx++;
        }

        /* Average among active antennas */
        if (num_active_rx)
                last_rx_noise = (total_silence / num_active_rx) - 107;
        else
                last_rx_noise = IL_NOISE_MEAS_NOT_AVAILABLE;

        D_CALIB("inband silence a %u, b %u, c %u, dBm %d\n", bcn_silence_a,
                bcn_silence_b, bcn_silence_c, last_rx_noise);
}

#ifdef CONFIG_IWLEGACY_DEBUGFS
/*
 *  based on the assumption of all stats counter are in DWORD
 *  FIXME: This function is for debugging, do not deal with
 *  the case of counters roll-over.
 */
static void
il4965_accumulative_stats(struct il_priv *il, __le32 * stats)
{
        int i, size;
        __le32 *prev_stats;
        u32 *accum_stats;
        u32 *delta, *max_delta;
        struct stats_general_common *general, *accum_general;

        prev_stats = (__le32 *) &il->_4965.stats;
        accum_stats = (u32 *) &il->_4965.accum_stats;
        size = sizeof(struct il_notif_stats);
        general = &il->_4965.stats.general.common;
        accum_general = &il->_4965.accum_stats.general.common;
        delta = (u32 *) &il->_4965.delta_stats;
        max_delta = (u32 *) &il->_4965.max_delta;

        for (i = sizeof(__le32); i < size;
             i +=
             sizeof(__le32), stats++, prev_stats++, delta++, max_delta++,
             accum_stats++) {
                if (le32_to_cpu(*stats) > le32_to_cpu(*prev_stats)) {
                        *delta =
                            (le32_to_cpu(*stats) - le32_to_cpu(*prev_stats));
                        *accum_stats += *delta;
                        if (*delta > *max_delta)
                                *max_delta = *delta;
                }
        }

        /* reset accumulative stats for "no-counter" type stats */
        accum_general->temperature = general->temperature;
        accum_general->ttl_timestamp = general->ttl_timestamp;
}
#endif

static void
il4965_hdl_stats(struct il_priv *il, struct il_rx_buf *rxb)
{
        const int recalib_seconds = 60;
        bool change;
        struct il_rx_pkt *pkt = rxb_addr(rxb);

        D_RX("Statistics notification received (%d vs %d).\n",
             (int)sizeof(struct il_notif_stats),
             le32_to_cpu(pkt->len_n_flags) & IL_RX_FRAME_SIZE_MSK);

        change =
            ((il->_4965.stats.general.common.temperature !=
              pkt->u.stats.general.common.temperature) ||
             ((il->_4965.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK) !=
              (pkt->u.stats.flag & STATS_REPLY_FLG_HT40_MODE_MSK)));
#ifdef CONFIG_IWLEGACY_DEBUGFS
        il4965_accumulative_stats(il, (__le32 *) &pkt->u.stats);
#endif

        /* TODO: reading some of stats is unneeded */
        memcpy(&il->_4965.stats, &pkt->u.stats, sizeof(il->_4965.stats));

        set_bit(S_STATS, &il->status);

        /*
         * Reschedule the stats timer to occur in recalib_seconds to ensure
         * we get a thermal update even if the uCode doesn't give us one
         */
        mod_timer(&il->stats_periodic,
                  jiffies + secs_to_jiffies(recalib_seconds));

        if (unlikely(!test_bit(S_SCANNING, &il->status)) &&
            (pkt->hdr.cmd == N_STATS)) {
                il4965_rx_calc_noise(il);
                queue_work(il->workqueue, &il->run_time_calib_work);
        }

        if (change)
                il4965_temperature_calib(il);
}

static void
il4965_hdl_c_stats(struct il_priv *il, struct il_rx_buf *rxb)
{
        struct il_rx_pkt *pkt = rxb_addr(rxb);

        if (le32_to_cpu(pkt->u.stats.flag) & UCODE_STATS_CLEAR_MSK) {
#ifdef CONFIG_IWLEGACY_DEBUGFS
                memset(&il->_4965.accum_stats, 0,
                       sizeof(struct il_notif_stats));
                memset(&il->_4965.delta_stats, 0,
                       sizeof(struct il_notif_stats));
                memset(&il->_4965.max_delta, 0, sizeof(struct il_notif_stats));
#endif
                D_RX("Statistics have been cleared\n");
        }
        il4965_hdl_stats(il, rxb);
}


/*
 * mac80211 queues, ACs, hardware queues, FIFOs.
 *
 * Cf. https://wireless.wiki.kernel.org/en/developers/Documentation/mac80211/queues
 *
 * Mac80211 uses the following numbers, which we get as from it
 * by way of skb_get_queue_mapping(skb):
 *
 *     VO      0
 *     VI      1
 *     BE      2
 *     BK      3
 *
 *
 * Regular (not A-MPDU) frames are put into hardware queues corresponding
 * to the FIFOs, see comments in iwl-prph.h. Aggregated frames get their
 * own queue per aggregation session (RA/TID combination), such queues are
 * set up to map into FIFOs too, for which we need an AC->FIFO mapping. In
 * order to map frames to the right queue, we also need an AC->hw queue
 * mapping. This is implemented here.
 *
 * Due to the way hw queues are set up (by the hw specific modules like
 * 4965.c), the AC->hw queue mapping is the identity
 * mapping.
 */

static const u8 tid_to_ac[] = {
        IEEE80211_AC_BE,
        IEEE80211_AC_BK,
        IEEE80211_AC_BK,
        IEEE80211_AC_BE,
        IEEE80211_AC_VI,
        IEEE80211_AC_VI,
        IEEE80211_AC_VO,
        IEEE80211_AC_VO
};

static inline int
il4965_get_ac_from_tid(u16 tid)
{
        if (likely(tid < ARRAY_SIZE(tid_to_ac)))
                return tid_to_ac[tid];

        /* no support for TIDs 8-15 yet */
        return -EINVAL;
}

static inline int
il4965_get_fifo_from_tid(u16 tid)
{
        static const u8 ac_to_fifo[] = {
                IL_TX_FIFO_VO,
                IL_TX_FIFO_VI,
                IL_TX_FIFO_BE,
                IL_TX_FIFO_BK,
        };

        if (likely(tid < ARRAY_SIZE(tid_to_ac)))
                return ac_to_fifo[tid_to_ac[tid]];

        /* no support for TIDs 8-15 yet */
        return -EINVAL;
}

/*
 * handle build C_TX command notification.
 */
static void
il4965_tx_cmd_build_basic(struct il_priv *il, struct sk_buff *skb,
                          struct il_tx_cmd *tx_cmd,
                          struct ieee80211_tx_info *info,
                          struct ieee80211_hdr *hdr, u8 std_id)
{
        __le16 fc = hdr->frame_control;
        __le32 tx_flags = tx_cmd->tx_flags;

        tx_cmd->stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
        if (!(info->flags & IEEE80211_TX_CTL_NO_ACK)) {
                tx_flags |= TX_CMD_FLG_ACK_MSK;
                if (ieee80211_is_mgmt(fc))
                        tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
                if (ieee80211_is_probe_resp(fc) &&
                    !(le16_to_cpu(hdr->seq_ctrl) & 0xf))
                        tx_flags |= TX_CMD_FLG_TSF_MSK;
        } else {
                tx_flags &= (~TX_CMD_FLG_ACK_MSK);
                tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
        }

        if (ieee80211_is_back_req(fc))
                tx_flags |= TX_CMD_FLG_ACK_MSK | TX_CMD_FLG_IMM_BA_RSP_MASK;

        tx_cmd->sta_id = std_id;
        if (ieee80211_has_morefrags(fc))
                tx_flags |= TX_CMD_FLG_MORE_FRAG_MSK;

        if (ieee80211_is_data_qos(fc)) {
                u8 *qc = ieee80211_get_qos_ctl(hdr);
                tx_cmd->tid_tspec = qc[0] & 0xf;
                tx_flags &= ~TX_CMD_FLG_SEQ_CTL_MSK;
        } else {
                tx_flags |= TX_CMD_FLG_SEQ_CTL_MSK;
        }

        il_tx_cmd_protection(il, info, fc, &tx_flags);

        tx_flags &= ~(TX_CMD_FLG_ANT_SEL_MSK);
        if (ieee80211_is_mgmt(fc)) {
                if (ieee80211_is_assoc_req(fc) || ieee80211_is_reassoc_req(fc))
                        tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(3);
                else
                        tx_cmd->timeout.pm_frame_timeout = cpu_to_le16(2);
        } else {
                tx_cmd->timeout.pm_frame_timeout = 0;
        }

        tx_cmd->driver_txop = 0;
        tx_cmd->tx_flags = tx_flags;
        tx_cmd->next_frame_len = 0;
}

static void
il4965_tx_cmd_build_rate(struct il_priv *il,
                         struct il_tx_cmd *tx_cmd,
                         struct ieee80211_tx_info *info,
                         struct ieee80211_sta *sta,
                         __le16 fc)
{
        const u8 rts_retry_limit = 60;
        u32 rate_flags;
        int rate_idx;
        u8 data_retry_limit;
        u8 rate_plcp;

        /* Set retry limit on DATA packets and Probe Responses */
        if (ieee80211_is_probe_resp(fc))
                data_retry_limit = 3;
        else
                data_retry_limit = IL4965_DEFAULT_TX_RETRY;
        tx_cmd->data_retry_limit = data_retry_limit;
        /* Set retry limit on RTS packets */
        tx_cmd->rts_retry_limit = min(data_retry_limit, rts_retry_limit);

        /* DATA packets will use the uCode station table for rate/antenna
         * selection */
        if (ieee80211_is_data(fc)) {
                tx_cmd->initial_rate_idx = 0;
                tx_cmd->tx_flags |= TX_CMD_FLG_STA_RATE_MSK;
                return;
        }

        /**
         * If the current TX rate stored in mac80211 has the MCS bit set, it's
         * not really a TX rate.  Thus, we use the lowest supported rate for
         * this band.  Also use the lowest supported rate if the stored rate
         * idx is invalid.
         */
        rate_idx = info->control.rates[0].idx;
        if ((info->control.rates[0].flags & IEEE80211_TX_RC_MCS) || rate_idx < 0
            || rate_idx > RATE_COUNT_LEGACY)
                rate_idx = rate_lowest_index(&il->bands[info->band], sta);
        /* For 5 GHZ band, remap mac80211 rate indices into driver indices */
        if (info->band == NL80211_BAND_5GHZ) {
                rate_idx += IL_FIRST_OFDM_RATE;
                if (rate_idx > IL_LAST_OFDM_RATE)
                        rate_idx = IL_LAST_OFDM_RATE;
        }
        /* Get PLCP rate for tx_cmd->rate_n_flags */
        rate_plcp = il_rates[rate_idx].plcp;
        /* Zero out flags for this packet */
        rate_flags = 0;

        /* Set CCK flag as needed */
        if (rate_idx >= IL_FIRST_CCK_RATE && rate_idx <= IL_LAST_CCK_RATE)
                rate_flags |= RATE_MCS_CCK_MSK;

        /* Set up antennas */
        il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant);
        rate_flags |= BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS;

        /* Set the rate in the TX cmd */
        tx_cmd->rate_n_flags = cpu_to_le32(rate_plcp | rate_flags);
}

static void
il4965_tx_cmd_build_hwcrypto(struct il_priv *il, struct ieee80211_tx_info *info,
                             struct il_tx_cmd *tx_cmd, struct sk_buff *skb_frag,
                             int sta_id)
{
        struct ieee80211_key_conf *keyconf = info->control.hw_key;

        switch (keyconf->cipher) {
        case WLAN_CIPHER_SUITE_CCMP:
                tx_cmd->sec_ctl = TX_CMD_SEC_CCM;
                memcpy(tx_cmd->key, keyconf->key, keyconf->keylen);
                if (info->flags & IEEE80211_TX_CTL_AMPDU)
                        tx_cmd->tx_flags |= TX_CMD_FLG_AGG_CCMP_MSK;
                D_TX("tx_cmd with AES hwcrypto\n");
                break;

        case WLAN_CIPHER_SUITE_TKIP:
                tx_cmd->sec_ctl = TX_CMD_SEC_TKIP;
                ieee80211_get_tkip_p2k(keyconf, skb_frag, tx_cmd->key);
                D_TX("tx_cmd with tkip hwcrypto\n");
                break;

        case WLAN_CIPHER_SUITE_WEP104:
                tx_cmd->sec_ctl |= TX_CMD_SEC_KEY128;
                fallthrough;
        case WLAN_CIPHER_SUITE_WEP40:
                tx_cmd->sec_ctl |=
                    (TX_CMD_SEC_WEP | (keyconf->keyidx & TX_CMD_SEC_MSK) <<
                     TX_CMD_SEC_SHIFT);

                memcpy(&tx_cmd->key[3], keyconf->key, keyconf->keylen);

                D_TX("Configuring packet for WEP encryption " "with key %d\n",
                     keyconf->keyidx);
                break;

        default:
                IL_ERR("Unknown encode cipher %x\n", keyconf->cipher);
                break;
        }
}

/*
 * start C_TX command process
 */
int
il4965_tx_skb(struct il_priv *il,
              struct ieee80211_sta *sta,
              struct sk_buff *skb)
{
        struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
        struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
        struct il_station_priv *sta_priv = NULL;
        struct il_tx_queue *txq;
        struct il_queue *q;
        struct il_device_cmd *out_cmd;
        struct il_cmd_meta *out_meta;
        struct il_tx_cmd *tx_cmd;
        int txq_id;
        dma_addr_t phys_addr;
        dma_addr_t txcmd_phys;
        dma_addr_t scratch_phys;
        u16 len, firstlen, secondlen;
        u16 seq_number = 0;
        __le16 fc;
        u8 hdr_len;
        u8 sta_id;
        u8 wait_write_ptr = 0;
        u8 tid = 0;
        u8 *qc = NULL;
        unsigned long flags;
        bool is_agg = false;

        spin_lock_irqsave(&il->lock, flags);
        if (il_is_rfkill(il)) {
                D_DROP("Dropping - RF KILL\n");
                goto drop_unlock;
        }

        fc = hdr->frame_control;

#ifdef CONFIG_IWLEGACY_DEBUG
        if (ieee80211_is_auth(fc))
                D_TX("Sending AUTH frame\n");
        else if (ieee80211_is_assoc_req(fc))
                D_TX("Sending ASSOC frame\n");
        else if (ieee80211_is_reassoc_req(fc))
                D_TX("Sending REASSOC frame\n");
#endif

        hdr_len = ieee80211_hdrlen(fc);

        /* For management frames use broadcast id to do not break aggregation */
        if (!ieee80211_is_data(fc))
                sta_id = il->hw_params.bcast_id;
        else {
                /* Find idx into station table for destination station */
                sta_id = il_sta_id_or_broadcast(il, sta);

                if (sta_id == IL_INVALID_STATION) {
                        D_DROP("Dropping - INVALID STATION: %pM\n", hdr->addr1);
                        goto drop_unlock;
                }
        }

        D_TX("station Id %d\n", sta_id);

        if (sta)
                sta_priv = (void *)sta->drv_priv;

        if (sta_priv && sta_priv->asleep &&
            (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER)) {
                /*
                 * This sends an asynchronous command to the device,
                 * but we can rely on it being processed before the
                 * next frame is processed -- and the next frame to
                 * this station is the one that will consume this
                 * counter.
                 * For now set the counter to just 1 since we do not
                 * support uAPSD yet.
                 */
                il4965_sta_modify_sleep_tx_count(il, sta_id, 1);
        }

        /* FIXME: remove me ? */
        WARN_ON_ONCE(info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM);

        /* Access category (AC) is also the queue number */
        txq_id = skb_get_queue_mapping(skb);

        /* irqs already disabled/saved above when locking il->lock */
        spin_lock(&il->sta_lock);

        if (ieee80211_is_data_qos(fc)) {
                qc = ieee80211_get_qos_ctl(hdr);
                tid = qc[0] & IEEE80211_QOS_CTL_TID_MASK;
                if (WARN_ON_ONCE(tid >= MAX_TID_COUNT)) {
                        spin_unlock(&il->sta_lock);
                        goto drop_unlock;
                }
                seq_number = il->stations[sta_id].tid[tid].seq_number;
                seq_number &= IEEE80211_SCTL_SEQ;
                hdr->seq_ctrl =
                    hdr->seq_ctrl & cpu_to_le16(IEEE80211_SCTL_FRAG);
                hdr->seq_ctrl |= cpu_to_le16(seq_number);
                seq_number += 0x10;
                /* aggregation is on for this <sta,tid> */
                if (info->flags & IEEE80211_TX_CTL_AMPDU &&
                    il->stations[sta_id].tid[tid].agg.state == IL_AGG_ON) {
                        txq_id = il->stations[sta_id].tid[tid].agg.txq_id;
                        is_agg = true;
                }
        }

        txq = &il->txq[txq_id];
        q = &txq->q;

        if (unlikely(il_queue_space(q) < q->high_mark)) {
                spin_unlock(&il->sta_lock);
                goto drop_unlock;
        }

        if (ieee80211_is_data_qos(fc)) {
                il->stations[sta_id].tid[tid].tfds_in_queue++;
                if (!ieee80211_has_morefrags(fc))
                        il->stations[sta_id].tid[tid].seq_number = seq_number;
        }

        spin_unlock(&il->sta_lock);

        txq->skbs[q->write_ptr] = skb;

        /* Set up first empty entry in queue's array of Tx/cmd buffers */
        out_cmd = txq->cmd[q->write_ptr];
        out_meta = &txq->meta[q->write_ptr];
        tx_cmd = container_of(&out_cmd->cmd.tx, struct il_tx_cmd, __hdr);
        memset(&out_cmd->hdr, 0, sizeof(out_cmd->hdr));
        memset(tx_cmd, 0, sizeof(struct il_tx_cmd));

        /*
         * Set up the Tx-command (not MAC!) header.
         * Store the chosen Tx queue and TFD idx within the sequence field;
         * after Tx, uCode's Tx response will return this value so driver can
         * locate the frame within the tx queue and do post-tx processing.
         */
        out_cmd->hdr.cmd = C_TX;
        out_cmd->hdr.sequence =
            cpu_to_le16((u16)
                        (QUEUE_TO_SEQ(txq_id) | IDX_TO_SEQ(q->write_ptr)));

        /* Copy MAC header from skb into command buffer */
        memcpy(tx_cmd->hdr, hdr, hdr_len);

        /* Total # bytes to be transmitted */
        tx_cmd->len = cpu_to_le16((u16) skb->len);

        if (info->control.hw_key)
                il4965_tx_cmd_build_hwcrypto(il, info, tx_cmd, skb, sta_id);

        /* TODO need this for burst mode later on */
        il4965_tx_cmd_build_basic(il, skb, tx_cmd, info, hdr, sta_id);

        il4965_tx_cmd_build_rate(il, tx_cmd, info, sta, fc);

        /*
         * Use the first empty entry in this queue's command buffer array
         * to contain the Tx command and MAC header concatenated together
         * (payload data will be in another buffer).
         * Size of this varies, due to varying MAC header length.
         * If end is not dword aligned, we'll have 2 extra bytes at the end
         * of the MAC header (device reads on dword boundaries).
         * We'll tell device about this padding later.
         */
        len = sizeof(struct il_tx_cmd) + sizeof(struct il_cmd_header) + hdr_len;
        firstlen = (len + 3) & ~3;

        /* Tell NIC about any 2-byte padding after MAC header */
        if (firstlen != len)
                tx_cmd->tx_flags |= TX_CMD_FLG_MH_PAD_MSK;

        /* Physical address of this Tx command's header (not MAC header!),
         * within command buffer array. */
        txcmd_phys = dma_map_single(&il->pci_dev->dev, &out_cmd->hdr, firstlen,
                                    DMA_BIDIRECTIONAL);
        if (unlikely(dma_mapping_error(&il->pci_dev->dev, txcmd_phys)))
                goto drop_unlock;

        /* Set up TFD's 2nd entry to point directly to remainder of skb,
         * if any (802.11 null frames have no payload). */
        secondlen = skb->len - hdr_len;
        if (secondlen > 0) {
                phys_addr = dma_map_single(&il->pci_dev->dev, skb->data + hdr_len,
                                           secondlen, DMA_TO_DEVICE);
                if (unlikely(dma_mapping_error(&il->pci_dev->dev, phys_addr)))
                        goto drop_unlock;
        }

        /* Add buffer containing Tx command and MAC(!) header to TFD's
         * first entry */
        il->ops->txq_attach_buf_to_tfd(il, txq, txcmd_phys, firstlen, 1, 0);
        dma_unmap_addr_set(out_meta, mapping, txcmd_phys);
        dma_unmap_len_set(out_meta, len, firstlen);
        if (secondlen)
                il->ops->txq_attach_buf_to_tfd(il, txq, phys_addr, secondlen,
                                               0, 0);

        if (!ieee80211_has_morefrags(hdr->frame_control)) {
                txq->need_update = 1;
        } else {
                wait_write_ptr = 1;
                txq->need_update = 0;
        }

        scratch_phys =
            txcmd_phys + sizeof(struct il_cmd_header) +
            offsetof(struct il_tx_cmd, scratch);

        /* take back ownership of DMA buffer to enable update */
        dma_sync_single_for_cpu(&il->pci_dev->dev, txcmd_phys, firstlen,
                                DMA_BIDIRECTIONAL);
        tx_cmd->dram_lsb_ptr = cpu_to_le32(scratch_phys);
        tx_cmd->dram_msb_ptr = il_get_dma_hi_addr(scratch_phys);

        il_update_stats(il, true, fc, skb->len);

        D_TX("sequence nr = 0X%x\n", le16_to_cpu(out_cmd->hdr.sequence));
        D_TX("tx_flags = 0X%x\n", le32_to_cpu(tx_cmd->tx_flags));
        il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd, sizeof(*tx_cmd));
        il_print_hex_dump(il, IL_DL_TX, (u8 *) tx_cmd->hdr, hdr_len);

        /* Set up entry for this TFD in Tx byte-count array */
        if (info->flags & IEEE80211_TX_CTL_AMPDU)
                il->ops->txq_update_byte_cnt_tbl(il, txq, le16_to_cpu(tx_cmd->len));

        dma_sync_single_for_device(&il->pci_dev->dev, txcmd_phys, firstlen,
                                   DMA_BIDIRECTIONAL);

        /* Tell device the write idx *just past* this latest filled TFD */
        q->write_ptr = il_queue_inc_wrap(q->write_ptr, q->n_bd);
        il_txq_update_write_ptr(il, txq);
        spin_unlock_irqrestore(&il->lock, flags);

        /*
         * At this point the frame is "transmitted" successfully
         * and we will get a TX status notification eventually,
         * regardless of the value of ret. "ret" only indicates
         * whether or not we should update the write pointer.
         */

        /*
         * Avoid atomic ops if it isn't an associated client.
         * Also, if this is a packet for aggregation, don't
         * increase the counter because the ucode will stop
         * aggregation queues when their respective station
         * goes to sleep.
         */
        if (sta_priv && sta_priv->client && !is_agg)
                atomic_inc(&sta_priv->pending_frames);

        if (il_queue_space(q) < q->high_mark && il->mac80211_registered) {
                if (wait_write_ptr) {
                        spin_lock_irqsave(&il->lock, flags);
                        txq->need_update = 1;
                        il_txq_update_write_ptr(il, txq);
                        spin_unlock_irqrestore(&il->lock, flags);
                } else {
                        il_stop_queue(il, txq);
                }
        }

        return 0;

drop_unlock:
        spin_unlock_irqrestore(&il->lock, flags);
        return -1;
}

static inline int
il4965_alloc_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr, size_t size)
{
        ptr->addr = dma_alloc_coherent(&il->pci_dev->dev, size, &ptr->dma,
                                       GFP_KERNEL);
        if (!ptr->addr)
                return -ENOMEM;
        ptr->size = size;
        return 0;
}

static inline void
il4965_free_dma_ptr(struct il_priv *il, struct il_dma_ptr *ptr)
{
        if (unlikely(!ptr->addr))
                return;

        dma_free_coherent(&il->pci_dev->dev, ptr->size, ptr->addr, ptr->dma);
        memset(ptr, 0, sizeof(*ptr));
}

/*
 * il4965_hw_txq_ctx_free - Free TXQ Context
 *
 * Destroy all TX DMA queues and structures
 */
void
il4965_hw_txq_ctx_free(struct il_priv *il)
{
        int txq_id;

        /* Tx queues */
        if (il->txq) {
                for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
                        if (txq_id == il->cmd_queue)
                                il_cmd_queue_free(il);
                        else
                                il_tx_queue_free(il, txq_id);
        }
        il4965_free_dma_ptr(il, &il->kw);

        il4965_free_dma_ptr(il, &il->scd_bc_tbls);

        /* free tx queue structure */
        il_free_txq_mem(il);
}

/*
 * il4965_txq_ctx_alloc - allocate TX queue context
 * Allocate all Tx DMA structures and initialize them
 */
int
il4965_txq_ctx_alloc(struct il_priv *il)
{
        int ret, txq_id;
        unsigned long flags;

        /* Free all tx/cmd queues and keep-warm buffer */
        il4965_hw_txq_ctx_free(il);

        ret =
            il4965_alloc_dma_ptr(il, &il->scd_bc_tbls,
                                 il->hw_params.scd_bc_tbls_size);
        if (ret) {
                IL_ERR("Scheduler BC Table allocation failed\n");
                goto error_bc_tbls;
        }
        /* Alloc keep-warm buffer */
        ret = il4965_alloc_dma_ptr(il, &il->kw, IL_KW_SIZE);
        if (ret) {
                IL_ERR("Keep Warm allocation failed\n");
                goto error_kw;
        }

        /* allocate tx queue structure */
        ret = il_alloc_txq_mem(il);
        if (ret)
                goto error;

        spin_lock_irqsave(&il->lock, flags);

        /* Turn off all Tx DMA fifos */
        il4965_txq_set_sched(il, 0);

        /* Tell NIC where to find the "keep warm" buffer */
        il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4);

        spin_unlock_irqrestore(&il->lock, flags);

        /* Alloc and init all Tx queues, including the command queue (#4/#9) */
        for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++) {
                ret = il_tx_queue_init(il, txq_id);
                if (ret) {
                        IL_ERR("Tx %d queue init failed\n", txq_id);
                        goto error;
                }
        }

        return ret;

error:
        il4965_hw_txq_ctx_free(il);
        il4965_free_dma_ptr(il, &il->kw);
error_kw:
        il4965_free_dma_ptr(il, &il->scd_bc_tbls);
error_bc_tbls:
        return ret;
}

void
il4965_txq_ctx_reset(struct il_priv *il)
{
        int txq_id;
        unsigned long flags;

        spin_lock_irqsave(&il->lock, flags);

        /* Turn off all Tx DMA fifos */
        il4965_txq_set_sched(il, 0);
        /* Tell NIC where to find the "keep warm" buffer */
        il_wr(il, FH49_KW_MEM_ADDR_REG, il->kw.dma >> 4);

        spin_unlock_irqrestore(&il->lock, flags);

        /* Alloc and init all Tx queues, including the command queue (#4) */
        for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
                il_tx_queue_reset(il, txq_id);
}

static void
il4965_txq_ctx_unmap(struct il_priv *il)
{
        int txq_id;

        if (!il->txq)
                return;

        /* Unmap DMA from host system and free skb's */
        for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
                if (txq_id == il->cmd_queue)
                        il_cmd_queue_unmap(il);
                else
                        il_tx_queue_unmap(il, txq_id);
}

/*
 * il4965_txq_ctx_stop - Stop all Tx DMA channels
 */
void
il4965_txq_ctx_stop(struct il_priv *il)
{
        int ch, ret;

        _il_wr_prph(il, IL49_SCD_TXFACT, 0);

        /* Stop each Tx DMA channel, and wait for it to be idle */
        for (ch = 0; ch < il->hw_params.dma_chnl_num; ch++) {
                _il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(ch), 0x0);
                ret =
                    _il_poll_bit(il, FH49_TSSR_TX_STATUS_REG,
                                 FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch),
                                 FH49_TSSR_TX_STATUS_REG_MSK_CHNL_IDLE(ch),
                                 1000);
                if (ret < 0)
                        IL_ERR("Timeout stopping DMA channel %d [0x%08x]",
                               ch, _il_rd(il, FH49_TSSR_TX_STATUS_REG));
        }
}

/*
 * Find first available (lowest unused) Tx Queue, mark it "active".
 * Called only when finding queue for aggregation.
 * Should never return anything < 7, because they should already
 * be in use as EDCA AC (0-3), Command (4), reserved (5, 6)
 */
static int
il4965_txq_ctx_activate_free(struct il_priv *il)
{
        int txq_id;

        for (txq_id = 0; txq_id < il->hw_params.max_txq_num; txq_id++)
                if (!test_and_set_bit(txq_id, &il->txq_ctx_active_msk))
                        return txq_id;
        return -1;
}

/*
 * il4965_tx_queue_stop_scheduler - Stop queue, but keep configuration
 */
static void
il4965_tx_queue_stop_scheduler(struct il_priv *il, u16 txq_id)
{
        /* Simply stop the queue, but don't change any configuration;
         * the SCD_ACT_EN bit is the write-enable mask for the ACTIVE bit. */
        il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id),
                   (0 << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
                   (1 << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACT_EN));
}

/*
 * il4965_tx_queue_set_q2ratid - Map unique receiver/tid combination to a queue
 */
static int
il4965_tx_queue_set_q2ratid(struct il_priv *il, u16 ra_tid, u16 txq_id)
{
        u32 tbl_dw_addr;
        u32 tbl_dw;
        u16 scd_q2ratid;

        scd_q2ratid = ra_tid & IL_SCD_QUEUE_RA_TID_MAP_RATID_MSK;

        tbl_dw_addr =
            il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(txq_id);

        tbl_dw = il_read_targ_mem(il, tbl_dw_addr);

        if (txq_id & 0x1)
                tbl_dw = (scd_q2ratid << 16) | (tbl_dw & 0x0000FFFF);
        else
                tbl_dw = scd_q2ratid | (tbl_dw & 0xFFFF0000);

        il_write_targ_mem(il, tbl_dw_addr, tbl_dw);

        return 0;
}

/*
 * il4965_tx_queue_agg_enable - Set up & enable aggregation for selected queue
 *
 * NOTE:  txq_id must be greater than IL49_FIRST_AMPDU_QUEUE,
 *        i.e. it must be one of the higher queues used for aggregation
 */
static int
il4965_txq_agg_enable(struct il_priv *il, int txq_id, int tx_fifo, int sta_id,
                      int tid, u16 ssn_idx)
{
        unsigned long flags;
        u16 ra_tid;
        int ret;

        if ((IL49_FIRST_AMPDU_QUEUE > txq_id) ||
            (IL49_FIRST_AMPDU_QUEUE +
             il->cfg->num_of_ampdu_queues <= txq_id)) {
                IL_WARN("queue number out of range: %d, must be %d to %d\n",
                        txq_id, IL49_FIRST_AMPDU_QUEUE,
                        IL49_FIRST_AMPDU_QUEUE +
                        il->cfg->num_of_ampdu_queues - 1);
                return -EINVAL;
        }

        ra_tid = BUILD_RAxTID(sta_id, tid);

        /* Modify device's station table to Tx this TID */
        ret = il4965_sta_tx_modify_enable_tid(il, sta_id, tid);
        if (ret)
                return ret;

        spin_lock_irqsave(&il->lock, flags);

        /* Stop this Tx queue before configuring it */
        il4965_tx_queue_stop_scheduler(il, txq_id);

        /* Map receiver-address / traffic-ID to this queue */
        il4965_tx_queue_set_q2ratid(il, ra_tid, txq_id);

        /* Set this queue as a chain-building queue */
        il_set_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));

        /* Place first TFD at idx corresponding to start sequence number.
         * Assumes that ssn_idx is valid (!= 0xFFF) */
        il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
        il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
        il4965_set_wr_ptrs(il, txq_id, ssn_idx);

        /* Set up Tx win size and frame limit for this queue */
        il_write_targ_mem(il,
                          il->scd_base_addr +
                          IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id),
                          (SCD_WIN_SIZE << IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS)
                          & IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);

        il_write_targ_mem(il,
                          il->scd_base_addr +
                          IL49_SCD_CONTEXT_QUEUE_OFFSET(txq_id) + sizeof(u32),
                          (SCD_FRAME_LIMIT <<
                           IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
                          IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);

        il_set_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id));

        /* Set up Status area in SRAM, map to Tx DMA/FIFO, activate the queue */
        il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 1);

        spin_unlock_irqrestore(&il->lock, flags);

        return 0;
}

int
il4965_tx_agg_start(struct il_priv *il, struct ieee80211_vif *vif,
                    struct ieee80211_sta *sta, u16 tid, u16 * ssn)
{
        int sta_id;
        int tx_fifo;
        int txq_id;
        int ret;
        unsigned long flags;
        struct il_tid_data *tid_data;

        /* FIXME: warning if tx fifo not found ? */
        tx_fifo = il4965_get_fifo_from_tid(tid);
        if (unlikely(tx_fifo < 0))
                return tx_fifo;

        D_HT("%s on ra = %pM tid = %d\n", __func__, sta->addr, tid);

        sta_id = il_sta_id(sta);
        if (sta_id == IL_INVALID_STATION) {
                IL_ERR("Start AGG on invalid station\n");
                return -ENXIO;
        }
        if (unlikely(tid >= MAX_TID_COUNT))
                return -EINVAL;

        if (il->stations[sta_id].tid[tid].agg.state != IL_AGG_OFF) {
                IL_ERR("Start AGG when state is not IL_AGG_OFF !\n");
                return -ENXIO;
        }

        txq_id = il4965_txq_ctx_activate_free(il);
        if (txq_id == -1) {
                IL_ERR("No free aggregation queue available\n");
                return -ENXIO;
        }

        spin_lock_irqsave(&il->sta_lock, flags);
        tid_data = &il->stations[sta_id].tid[tid];
        *ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number);
        tid_data->agg.txq_id = txq_id;
        il_set_swq_id(&il->txq[txq_id], il4965_get_ac_from_tid(tid), txq_id);
        spin_unlock_irqrestore(&il->sta_lock, flags);

        ret = il4965_txq_agg_enable(il, txq_id, tx_fifo, sta_id, tid, *ssn);
        if (ret)
                return ret;

        spin_lock_irqsave(&il->sta_lock, flags);
        tid_data = &il->stations[sta_id].tid[tid];
        if (tid_data->tfds_in_queue == 0) {
                D_HT("HW queue is empty\n");
                tid_data->agg.state = IL_AGG_ON;
                ret = IEEE80211_AMPDU_TX_START_IMMEDIATE;
        } else {
                D_HT("HW queue is NOT empty: %d packets in HW queue\n",
                     tid_data->tfds_in_queue);
                tid_data->agg.state = IL_EMPTYING_HW_QUEUE_ADDBA;
        }
        spin_unlock_irqrestore(&il->sta_lock, flags);
        return ret;
}

/*
 * txq_id must be greater than IL49_FIRST_AMPDU_QUEUE
 * il->lock must be held by the caller
 */
static int
il4965_txq_agg_disable(struct il_priv *il, u16 txq_id, u16 ssn_idx, u8 tx_fifo)
{
        if ((IL49_FIRST_AMPDU_QUEUE > txq_id) ||
            (IL49_FIRST_AMPDU_QUEUE +
             il->cfg->num_of_ampdu_queues <= txq_id)) {
                IL_WARN("queue number out of range: %d, must be %d to %d\n",
                        txq_id, IL49_FIRST_AMPDU_QUEUE,
                        IL49_FIRST_AMPDU_QUEUE +
                        il->cfg->num_of_ampdu_queues - 1);
                return -EINVAL;
        }

        il4965_tx_queue_stop_scheduler(il, txq_id);

        il_clear_bits_prph(il, IL49_SCD_QUEUECHAIN_SEL, (1 << txq_id));

        il->txq[txq_id].q.read_ptr = (ssn_idx & 0xff);
        il->txq[txq_id].q.write_ptr = (ssn_idx & 0xff);
        /* supposes that ssn_idx is valid (!= 0xFFF) */
        il4965_set_wr_ptrs(il, txq_id, ssn_idx);

        il_clear_bits_prph(il, IL49_SCD_INTERRUPT_MASK, (1 << txq_id));
        il_txq_ctx_deactivate(il, txq_id);
        il4965_tx_queue_set_status(il, &il->txq[txq_id], tx_fifo, 0);

        return 0;
}

int
il4965_tx_agg_stop(struct il_priv *il, struct ieee80211_vif *vif,
                   struct ieee80211_sta *sta, u16 tid)
{
        int tx_fifo_id, txq_id, sta_id, ssn;
        struct il_tid_data *tid_data;
        int write_ptr, read_ptr;
        unsigned long flags;

        /* FIXME: warning if tx_fifo_id not found ? */
        tx_fifo_id = il4965_get_fifo_from_tid(tid);
        if (unlikely(tx_fifo_id < 0))
                return tx_fifo_id;

        sta_id = il_sta_id(sta);

        if (sta_id == IL_INVALID_STATION) {
                IL_ERR("Invalid station for AGG tid %d\n", tid);
                return -ENXIO;
        }

        spin_lock_irqsave(&il->sta_lock, flags);

        tid_data = &il->stations[sta_id].tid[tid];
        ssn = (tid_data->seq_number & IEEE80211_SCTL_SEQ) >> 4;
        txq_id = tid_data->agg.txq_id;

        switch (il->stations[sta_id].tid[tid].agg.state) {
        case IL_EMPTYING_HW_QUEUE_ADDBA:
                /*
                 * This can happen if the peer stops aggregation
                 * again before we've had a chance to drain the
                 * queue we selected previously, i.e. before the
                 * session was really started completely.
                 */
                D_HT("AGG stop before setup done\n");
                goto turn_off;
        case IL_AGG_ON:
                break;
        default:
                IL_WARN("Stopping AGG while state not ON or starting\n");
        }

        write_ptr = il->txq[txq_id].q.write_ptr;
        read_ptr = il->txq[txq_id].q.read_ptr;

        /* The queue is not empty */
        if (write_ptr != read_ptr) {
                D_HT("Stopping a non empty AGG HW QUEUE\n");
                il->stations[sta_id].tid[tid].agg.state =
                    IL_EMPTYING_HW_QUEUE_DELBA;
                spin_unlock_irqrestore(&il->sta_lock, flags);
                return 0;
        }

        D_HT("HW queue is empty\n");
turn_off:
        il->stations[sta_id].tid[tid].agg.state = IL_AGG_OFF;

        /* do not restore/save irqs */
        spin_unlock(&il->sta_lock);
        spin_lock(&il->lock);

        /*
         * the only reason this call can fail is queue number out of range,
         * which can happen if uCode is reloaded and all the station
         * information are lost. if it is outside the range, there is no need
         * to deactivate the uCode queue, just return "success" to allow
         *  mac80211 to clean up it own data.
         */
        il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo_id);
        spin_unlock_irqrestore(&il->lock, flags);

        ieee80211_stop_tx_ba_cb_irqsafe(vif, sta->addr, tid);

        return 0;
}

int
il4965_txq_check_empty(struct il_priv *il, int sta_id, u8 tid, int txq_id)
{
        struct il_queue *q = &il->txq[txq_id].q;
        u8 *addr = il->stations[sta_id].sta.sta.addr;
        struct il_tid_data *tid_data = &il->stations[sta_id].tid[tid];

        lockdep_assert_held(&il->sta_lock);

        switch (il->stations[sta_id].tid[tid].agg.state) {
        case IL_EMPTYING_HW_QUEUE_DELBA:
                /* We are reclaiming the last packet of the */
                /* aggregated HW queue */
                if (txq_id == tid_data->agg.txq_id &&
                    q->read_ptr == q->write_ptr) {
                        u16 ssn = IEEE80211_SEQ_TO_SN(tid_data->seq_number);
                        int tx_fifo = il4965_get_fifo_from_tid(tid);
                        D_HT("HW queue empty: continue DELBA flow\n");
                        il4965_txq_agg_disable(il, txq_id, ssn, tx_fifo);
                        tid_data->agg.state = IL_AGG_OFF;
                        ieee80211_stop_tx_ba_cb_irqsafe(il->vif, addr, tid);
                }
                break;
        case IL_EMPTYING_HW_QUEUE_ADDBA:
                /* We are reclaiming the last packet of the queue */
                if (tid_data->tfds_in_queue == 0) {
                        D_HT("HW queue empty: continue ADDBA flow\n");
                        tid_data->agg.state = IL_AGG_ON;
                        ieee80211_start_tx_ba_cb_irqsafe(il->vif, addr, tid);
                }
                break;
        }

        return 0;
}

static void
il4965_non_agg_tx_status(struct il_priv *il, const u8 *addr1)
{
        struct ieee80211_sta *sta;
        struct il_station_priv *sta_priv;

        rcu_read_lock();
        sta = ieee80211_find_sta(il->vif, addr1);
        if (sta) {
                sta_priv = (void *)sta->drv_priv;
                /* avoid atomic ops if this isn't a client */
                if (sta_priv->client &&
                    atomic_dec_return(&sta_priv->pending_frames) == 0)
                        ieee80211_sta_block_awake(il->hw, sta, false);
        }
        rcu_read_unlock();
}

static void
il4965_tx_status(struct il_priv *il, struct sk_buff *skb, bool is_agg)
{
        struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;

        if (!is_agg)
                il4965_non_agg_tx_status(il, hdr->addr1);

        ieee80211_tx_status_irqsafe(il->hw, skb);
}

int
il4965_tx_queue_reclaim(struct il_priv *il, int txq_id, int idx)
{
        struct il_tx_queue *txq = &il->txq[txq_id];
        struct il_queue *q = &txq->q;
        int nfreed = 0;
        struct ieee80211_hdr *hdr;
        struct sk_buff *skb;

        if (idx >= q->n_bd || il_queue_used(q, idx) == 0) {
                IL_ERR("Read idx for DMA queue txq id (%d), idx %d, "
                       "is out of range [0-%d] %d %d.\n", txq_id, idx, q->n_bd,
                       q->write_ptr, q->read_ptr);
                return 0;
        }

        for (idx = il_queue_inc_wrap(idx, q->n_bd); q->read_ptr != idx;
             q->read_ptr = il_queue_inc_wrap(q->read_ptr, q->n_bd)) {

                skb = txq->skbs[txq->q.read_ptr];

                if (WARN_ON_ONCE(skb == NULL))
                        continue;

                hdr = (struct ieee80211_hdr *) skb->data;
                if (ieee80211_is_data_qos(hdr->frame_control))
                        nfreed++;

                il4965_tx_status(il, skb, txq_id >= IL4965_FIRST_AMPDU_QUEUE);

                txq->skbs[txq->q.read_ptr] = NULL;
                il->ops->txq_free_tfd(il, txq);
        }
        return nfreed;
}

/*
 * il4965_tx_status_reply_compressed_ba - Update tx status from block-ack
 *
 * Go through block-ack's bitmap of ACK'd frames, update driver's record of
 * ACK vs. not.  This gets sent to mac80211, then to rate scaling algo.
 */
static int
il4965_tx_status_reply_compressed_ba(struct il_priv *il, struct il_ht_agg *agg,
                                     struct il_compressed_ba_resp *ba_resp)
{
        int i, sh, ack;
        u16 seq_ctl = le16_to_cpu(ba_resp->seq_ctl);
        u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);
        int successes = 0;
        struct ieee80211_tx_info *info;
        u64 bitmap, sent_bitmap;

        if (unlikely(!agg->wait_for_ba)) {
                if (unlikely(ba_resp->bitmap))
                        IL_ERR("Received BA when not expected\n");
                return -EINVAL;
        }

        /* Mark that the expected block-ack response arrived */
        agg->wait_for_ba = 0;
        D_TX_REPLY("BA %d %d\n", agg->start_idx, ba_resp->seq_ctl);

        /* Calculate shift to align block-ack bits with our Tx win bits */
        sh = agg->start_idx - SEQ_TO_IDX(seq_ctl >> 4);
        if (sh < 0)             /* tbw something is wrong with indices */
                sh += 0x100;

        if (agg->frame_count > (64 - sh)) {
                D_TX_REPLY("more frames than bitmap size");
                return -1;
        }

        /* don't use 64-bit values for now */
        bitmap = le64_to_cpu(ba_resp->bitmap) >> sh;

        /* check for success or failure according to the
         * transmitted bitmap and block-ack bitmap */
        sent_bitmap = bitmap & agg->bitmap;

        /* For each frame attempted in aggregation,
         * update driver's record of tx frame's status. */
        i = 0;
        while (sent_bitmap) {
                ack = sent_bitmap & 1ULL;
                successes += ack;
                D_TX_REPLY("%s ON i=%d idx=%d raw=%d\n", ack ? "ACK" : "NACK",
                           i, (agg->start_idx + i) & 0xff, agg->start_idx + i);
                sent_bitmap >>= 1;
                ++i;
        }

        D_TX_REPLY("Bitmap %llx\n", (unsigned long long)bitmap);

        info = IEEE80211_SKB_CB(il->txq[scd_flow].skbs[agg->start_idx]);
        memset(&info->status, 0, sizeof(info->status));
        info->flags |= IEEE80211_TX_STAT_ACK;
        info->flags |= IEEE80211_TX_STAT_AMPDU;
        info->status.ampdu_ack_len = successes;
        info->status.ampdu_len = agg->frame_count;
        il4965_hwrate_to_tx_control(il, agg->rate_n_flags, info);

        return 0;
}

static inline bool
il4965_is_tx_success(u32 status)
{
        status &= TX_STATUS_MSK;
        return (status == TX_STATUS_SUCCESS || status == TX_STATUS_DIRECT_DONE);
}

static u8
il4965_find_station(struct il_priv *il, const u8 *addr)
{
        int i;
        int start = 0;
        int ret = IL_INVALID_STATION;
        unsigned long flags;

        if (il->iw_mode == NL80211_IFTYPE_ADHOC)
                start = IL_STA_ID;

        if (is_broadcast_ether_addr(addr))
                return il->hw_params.bcast_id;

        spin_lock_irqsave(&il->sta_lock, flags);
        for (i = start; i < il->hw_params.max_stations; i++)
                if (il->stations[i].used &&
                    ether_addr_equal(il->stations[i].sta.sta.addr, addr)) {
                        ret = i;
                        goto out;
                }

        D_ASSOC("can not find STA %pM total %d\n", addr, il->num_stations);

out:
        /*
         * It may be possible that more commands interacting with stations
         * arrive before we completed processing the adding of
         * station
         */
        if (ret != IL_INVALID_STATION &&
            (!(il->stations[ret].used & IL_STA_UCODE_ACTIVE) ||
              (il->stations[ret].used & IL_STA_UCODE_INPROGRESS))) {
                IL_ERR("Requested station info for sta %d before ready.\n",
                       ret);
                ret = IL_INVALID_STATION;
        }
        spin_unlock_irqrestore(&il->sta_lock, flags);
        return ret;
}

static int
il4965_get_ra_sta_id(struct il_priv *il, struct ieee80211_hdr *hdr)
{
        if (il->iw_mode == NL80211_IFTYPE_STATION)
                return IL_AP_ID;
        else {
                u8 *da = ieee80211_get_DA(hdr);

                return il4965_find_station(il, da);
        }
}

static inline u32
il4965_get_scd_ssn(struct il4965_tx_resp *tx_resp)
{
        return le32_to_cpup(&tx_resp->u.status +
                            tx_resp->frame_count) & IEEE80211_MAX_SN;
}

static inline u32
il4965_tx_status_to_mac80211(u32 status)
{
        status &= TX_STATUS_MSK;

        switch (status) {
        case TX_STATUS_SUCCESS:
        case TX_STATUS_DIRECT_DONE:
                return IEEE80211_TX_STAT_ACK;
        case TX_STATUS_FAIL_DEST_PS:
                return IEEE80211_TX_STAT_TX_FILTERED;
        default:
                return 0;
        }
}

/*
 * il4965_tx_status_reply_tx - Handle Tx response for frames in aggregation queue
 */
static int
il4965_tx_status_reply_tx(struct il_priv *il, struct il_ht_agg *agg,
                          struct il4965_tx_resp *tx_resp, int txq_id,
                          u16 start_idx)
{
        u16 status;
        struct agg_tx_status *frame_status = tx_resp->u.agg_status;
        struct ieee80211_tx_info *info = NULL;
        struct ieee80211_hdr *hdr = NULL;
        u32 rate_n_flags = le32_to_cpu(tx_resp->rate_n_flags);
        int i, sh, idx;
        u16 seq;
        if (agg->wait_for_ba)
                D_TX_REPLY("got tx response w/o block-ack\n");

        agg->frame_count = tx_resp->frame_count;
        agg->start_idx = start_idx;
        agg->rate_n_flags = rate_n_flags;
        agg->bitmap = 0;

        /* num frames attempted by Tx command */
        if (agg->frame_count == 1) {
                /* Only one frame was attempted; no block-ack will arrive */
                status = le16_to_cpu(frame_status[0].status);
                idx = start_idx;

                D_TX_REPLY("FrameCnt = %d, StartIdx=%d idx=%d\n",
                           agg->frame_count, agg->start_idx, idx);

                info = IEEE80211_SKB_CB(il->txq[txq_id].skbs[idx]);
                info->status.rates[0].count = tx_resp->failure_frame + 1;
                info->flags &= ~IEEE80211_TX_CTL_AMPDU;
                info->flags |= il4965_tx_status_to_mac80211(status);
                il4965_hwrate_to_tx_control(il, rate_n_flags, info);

                D_TX_REPLY("1 Frame 0x%x failure :%d\n", status & 0xff,
                           tx_resp->failure_frame);
                D_TX_REPLY("Rate Info rate_n_flags=%x\n", rate_n_flags);

                agg->wait_for_ba = 0;
        } else {
                /* Two or more frames were attempted; expect block-ack */
                u64 bitmap = 0;
                int start = agg->start_idx;
                struct sk_buff *skb;

                /* Construct bit-map of pending frames within Tx win */
                for (i = 0; i < agg->frame_count; i++) {
                        u16 sc;
                        status = le16_to_cpu(frame_status[i].status);
                        seq = le16_to_cpu(frame_status[i].sequence);
                        idx = SEQ_TO_IDX(seq);
                        txq_id = SEQ_TO_QUEUE(seq);

                        if (status &
                            (AGG_TX_STATE_FEW_BYTES_MSK |
                             AGG_TX_STATE_ABORT_MSK))
                                continue;

                        D_TX_REPLY("FrameCnt = %d, txq_id=%d idx=%d\n",
                                   agg->frame_count, txq_id, idx);

                        skb = il->txq[txq_id].skbs[idx];
                        if (WARN_ON_ONCE(skb == NULL))
                                return -1;
                        hdr = (struct ieee80211_hdr *) skb->data;

                        sc = le16_to_cpu(hdr->seq_ctrl);
                        if (idx != (IEEE80211_SEQ_TO_SN(sc) & 0xff)) {
                                IL_ERR("BUG_ON idx doesn't match seq control"
                                       " idx=%d, seq_idx=%d, seq=%d\n", idx,
                                       IEEE80211_SEQ_TO_SN(sc), hdr->seq_ctrl);
                                return -1;
                        }

                        D_TX_REPLY("AGG Frame i=%d idx %d seq=%d\n", i, idx,
                                   IEEE80211_SEQ_TO_SN(sc));

                        sh = idx - start;
                        if (sh > 64) {
                                sh = (start - idx) + 0xff;
                                bitmap = bitmap << sh;
                                sh = 0;
                                start = idx;
                        } else if (sh < -64)
                                sh = 0xff - (start - idx);
                        else if (sh < 0) {
                                sh = start - idx;
                                start = idx;
                                bitmap = bitmap << sh;
                                sh = 0;
                        }
                        bitmap |= 1ULL << sh;
                        D_TX_REPLY("start=%d bitmap=0x%llx\n", start,
                                   (unsigned long long)bitmap);
                }

                agg->bitmap = bitmap;
                agg->start_idx = start;
                D_TX_REPLY("Frames %d start_idx=%d bitmap=0x%llx\n",
                           agg->frame_count, agg->start_idx,
                           (unsigned long long)agg->bitmap);

                if (bitmap)
                        agg->wait_for_ba = 1;
        }
        return 0;
}

/*
 * il4965_hdl_tx - Handle standard (non-aggregation) Tx response
 */
static void
il4965_hdl_tx(struct il_priv *il, struct il_rx_buf *rxb)
{
        struct il_rx_pkt *pkt = rxb_addr(rxb);
        u16 sequence = le16_to_cpu(pkt->hdr.sequence);
        int txq_id = SEQ_TO_QUEUE(sequence);
        int idx = SEQ_TO_IDX(sequence);
        struct il_tx_queue *txq = &il->txq[txq_id];
        struct sk_buff *skb;
        struct ieee80211_hdr *hdr;
        struct ieee80211_tx_info *info;
        struct il4965_tx_resp *tx_resp = (void *)&pkt->u.raw[0];
        u32 status = le32_to_cpu(tx_resp->u.status);
        int tid;
        int sta_id;
        int freed;
        u8 *qc = NULL;
        unsigned long flags;

        if (idx >= txq->q.n_bd || il_queue_used(&txq->q, idx) == 0) {
                IL_ERR("Read idx for DMA queue txq_id (%d) idx %d "
                       "is out of range [0-%d] %d %d\n", txq_id, idx,
                       txq->q.n_bd, txq->q.write_ptr, txq->q.read_ptr);
                return;
        }

        txq->time_stamp = jiffies;

        skb = txq->skbs[txq->q.read_ptr];
        info = IEEE80211_SKB_CB(skb);
        memset(&info->status, 0, sizeof(info->status));

        hdr = (struct ieee80211_hdr *) skb->data;
        if (ieee80211_is_data_qos(hdr->frame_control)) {
                qc = ieee80211_get_qos_ctl(hdr);
                tid = qc[0] & 0xf;
        }

        sta_id = il4965_get_ra_sta_id(il, hdr);
        if (txq->sched_retry && unlikely(sta_id == IL_INVALID_STATION)) {
                IL_ERR("Station not known\n");
                return;
        }

        /*
         * Firmware will not transmit frame on passive channel, if it not yet
         * received some valid frame on that channel. When this error happen
         * we have to wait until firmware will unblock itself i.e. when we
         * note received beacon or other frame. We unblock queues in
         * il4965_pass_packet_to_mac80211 or in il_mac_bss_info_changed.
         */
        if (unlikely((status & TX_STATUS_MSK) == TX_STATUS_FAIL_PASSIVE_NO_RX) &&
            il->iw_mode == NL80211_IFTYPE_STATION) {
                il_stop_queues_by_reason(il, IL_STOP_REASON_PASSIVE);
                D_INFO("Stopped queues - RX waiting on passive channel\n");
        }

        spin_lock_irqsave(&il->sta_lock, flags);
        if (txq->sched_retry) {
                const u32 scd_ssn = il4965_get_scd_ssn(tx_resp);
                struct il_ht_agg *agg;

                if (WARN_ON(!qc))
                        goto out;

                agg = &il->stations[sta_id].tid[tid].agg;

                il4965_tx_status_reply_tx(il, agg, tx_resp, txq_id, idx);

                /* check if BAR is needed */
                if (tx_resp->frame_count == 1 &&
                    !il4965_is_tx_success(status))
                        info->flags |= IEEE80211_TX_STAT_AMPDU_NO_BACK;

                if (txq->q.read_ptr != (scd_ssn & 0xff)) {
                        idx = il_queue_dec_wrap(scd_ssn & 0xff, txq->q.n_bd);
                        D_TX_REPLY("Retry scheduler reclaim scd_ssn "
                                   "%d idx %d\n", scd_ssn, idx);
                        freed = il4965_tx_queue_reclaim(il, txq_id, idx);
                        il4965_free_tfds_in_queue(il, sta_id, tid, freed);

                        if (il->mac80211_registered &&
                            il_queue_space(&txq->q) > txq->q.low_mark &&
                            agg->state != IL_EMPTYING_HW_QUEUE_DELBA)
                                il_wake_queue(il, txq);
                }
        } else {
                info->status.rates[0].count = tx_resp->failure_frame + 1;
                info->flags |= il4965_tx_status_to_mac80211(status);
                il4965_hwrate_to_tx_control(il,
                                            le32_to_cpu(tx_resp->rate_n_flags),
                                            info);

                D_TX_REPLY("TXQ %d status %s (0x%08x) "
                           "rate_n_flags 0x%x retries %d\n", txq_id,
                           il4965_get_tx_fail_reason(status), status,
                           le32_to_cpu(tx_resp->rate_n_flags),
                           tx_resp->failure_frame);

                freed = il4965_tx_queue_reclaim(il, txq_id, idx);
                if (qc && likely(sta_id != IL_INVALID_STATION))
                        il4965_free_tfds_in_queue(il, sta_id, tid, freed);
                else if (sta_id == IL_INVALID_STATION)
                        D_TX_REPLY("Station not known\n");

                if (il->mac80211_registered &&
                    il_queue_space(&txq->q) > txq->q.low_mark)
                        il_wake_queue(il, txq);
        }
out:
        if (qc && likely(sta_id != IL_INVALID_STATION))
                il4965_txq_check_empty(il, sta_id, tid, txq_id);

        il4965_check_abort_status(il, tx_resp->frame_count, status);

        spin_unlock_irqrestore(&il->sta_lock, flags);
}

/*
 * translate ucode response to mac80211 tx status control values
 */
void
il4965_hwrate_to_tx_control(struct il_priv *il, u32 rate_n_flags,
                            struct ieee80211_tx_info *info)
{
        struct ieee80211_tx_rate *r = &info->status.rates[0];

        info->status.antenna =
            ((rate_n_flags & RATE_MCS_ANT_ABC_MSK) >> RATE_MCS_ANT_POS);
        if (rate_n_flags & RATE_MCS_HT_MSK)
                r->flags |= IEEE80211_TX_RC_MCS;
        if (rate_n_flags & RATE_MCS_GF_MSK)
                r->flags |= IEEE80211_TX_RC_GREEN_FIELD;
        if (rate_n_flags & RATE_MCS_HT40_MSK)
                r->flags |= IEEE80211_TX_RC_40_MHZ_WIDTH;
        if (rate_n_flags & RATE_MCS_DUP_MSK)
                r->flags |= IEEE80211_TX_RC_DUP_DATA;
        if (rate_n_flags & RATE_MCS_SGI_MSK)
                r->flags |= IEEE80211_TX_RC_SHORT_GI;
        r->idx = il4965_hwrate_to_mac80211_idx(rate_n_flags, info->band);
}

/*
 * il4965_hdl_compressed_ba - Handler for N_COMPRESSED_BA
 *
 * Handles block-acknowledge notification from device, which reports success
 * of frames sent via aggregation.
 */
static void
il4965_hdl_compressed_ba(struct il_priv *il, struct il_rx_buf *rxb)
{
        struct il_rx_pkt *pkt = rxb_addr(rxb);
        struct il_compressed_ba_resp *ba_resp = &pkt->u.compressed_ba;
        struct il_tx_queue *txq = NULL;
        struct il_ht_agg *agg;
        int idx;
        int sta_id;
        int tid;
        unsigned long flags;

        /* "flow" corresponds to Tx queue */
        u16 scd_flow = le16_to_cpu(ba_resp->scd_flow);

        /* "ssn" is start of block-ack Tx win, corresponds to idx
         * (in Tx queue's circular buffer) of first TFD/frame in win */
        u16 ba_resp_scd_ssn = le16_to_cpu(ba_resp->scd_ssn);

        if (scd_flow >= il->hw_params.max_txq_num) {
                IL_ERR("BUG_ON scd_flow is bigger than number of queues\n");
                return;
        }

        txq = &il->txq[scd_flow];
        sta_id = ba_resp->sta_id;
        tid = ba_resp->tid;
        agg = &il->stations[sta_id].tid[tid].agg;
        if (unlikely(agg->txq_id != scd_flow)) {
                /*
                 * FIXME: this is a uCode bug which need to be addressed,
                 * log the information and return for now!
                 * since it is possible happen very often and in order
                 * not to fill the syslog, don't enable the logging by default
                 */
                D_TX_REPLY("BA scd_flow %d does not match txq_id %d\n",
                           scd_flow, agg->txq_id);
                return;
        }

        /* Find idx just before block-ack win */
        idx = il_queue_dec_wrap(ba_resp_scd_ssn & 0xff, txq->q.n_bd);

        spin_lock_irqsave(&il->sta_lock, flags);

        D_TX_REPLY("N_COMPRESSED_BA [%d] Received from %pM, " "sta_id = %d\n",
                   agg->wait_for_ba, (u8 *) &ba_resp->sta_addr_lo32,
                   ba_resp->sta_id);
        D_TX_REPLY("TID = %d, SeqCtl = %d, bitmap = 0x%llx," "scd_flow = "
                   "%d, scd_ssn = %d\n", ba_resp->tid, ba_resp->seq_ctl,
                   (unsigned long long)le64_to_cpu(ba_resp->bitmap),
                   ba_resp->scd_flow, ba_resp->scd_ssn);
        D_TX_REPLY("DAT start_idx = %d, bitmap = 0x%llx\n", agg->start_idx,
                   (unsigned long long)agg->bitmap);

        /* Update driver's record of ACK vs. not for each frame in win */
        il4965_tx_status_reply_compressed_ba(il, agg, ba_resp);

        /* Release all TFDs before the SSN, i.e. all TFDs in front of
         * block-ack win (we assume that they've been successfully
         * transmitted ... if not, it's too late anyway). */
        if (txq->q.read_ptr != (ba_resp_scd_ssn & 0xff)) {
                /* calculate mac80211 ampdu sw queue to wake */
                int freed = il4965_tx_queue_reclaim(il, scd_flow, idx);
                il4965_free_tfds_in_queue(il, sta_id, tid, freed);

                if (il_queue_space(&txq->q) > txq->q.low_mark &&
                    il->mac80211_registered &&
                    agg->state != IL_EMPTYING_HW_QUEUE_DELBA)
                        il_wake_queue(il, txq);

                il4965_txq_check_empty(il, sta_id, tid, scd_flow);
        }

        spin_unlock_irqrestore(&il->sta_lock, flags);
}

#ifdef CONFIG_IWLEGACY_DEBUG
const char *
il4965_get_tx_fail_reason(u32 status)
{
#define TX_STATUS_FAIL(x) case TX_STATUS_FAIL_ ## x: return #x
#define TX_STATUS_POSTPONE(x) case TX_STATUS_POSTPONE_ ## x: return #x

        switch (status & TX_STATUS_MSK) {
        case TX_STATUS_SUCCESS:
                return "SUCCESS";
                TX_STATUS_POSTPONE(DELAY);
                TX_STATUS_POSTPONE(FEW_BYTES);
                TX_STATUS_POSTPONE(QUIET_PERIOD);
                TX_STATUS_POSTPONE(CALC_TTAK);
                TX_STATUS_FAIL(INTERNAL_CROSSED_RETRY);
                TX_STATUS_FAIL(SHORT_LIMIT);
                TX_STATUS_FAIL(LONG_LIMIT);
                TX_STATUS_FAIL(FIFO_UNDERRUN);
                TX_STATUS_FAIL(DRAIN_FLOW);
                TX_STATUS_FAIL(RFKILL_FLUSH);
                TX_STATUS_FAIL(LIFE_EXPIRE);
                TX_STATUS_FAIL(DEST_PS);
                TX_STATUS_FAIL(HOST_ABORTED);
                TX_STATUS_FAIL(BT_RETRY);
                TX_STATUS_FAIL(STA_INVALID);
                TX_STATUS_FAIL(FRAG_DROPPED);
                TX_STATUS_FAIL(TID_DISABLE);
                TX_STATUS_FAIL(FIFO_FLUSHED);
                TX_STATUS_FAIL(INSUFFICIENT_CF_POLL);
                TX_STATUS_FAIL(PASSIVE_NO_RX);
                TX_STATUS_FAIL(NO_BEACON_ON_RADAR);
        }

        return "UNKNOWN";

#undef TX_STATUS_FAIL
#undef TX_STATUS_POSTPONE
}
#endif /* CONFIG_IWLEGACY_DEBUG */

static struct il_link_quality_cmd *
il4965_sta_alloc_lq(struct il_priv *il, u8 sta_id)
{
        int i, r;
        struct il_link_quality_cmd *link_cmd;
        u32 rate_flags = 0;
        __le32 rate_n_flags;

        link_cmd = kzalloc_obj(struct il_link_quality_cmd);
        if (!link_cmd) {
                IL_ERR("Unable to allocate memory for LQ cmd.\n");
                return NULL;
        }
        /* Set up the rate scaling to start at selected rate, fall back
         * all the way down to 1M in IEEE order, and then spin on 1M */
        if (il->band == NL80211_BAND_5GHZ)
                r = RATE_6M_IDX;
        else
                r = RATE_1M_IDX;

        if (r >= IL_FIRST_CCK_RATE && r <= IL_LAST_CCK_RATE)
                rate_flags |= RATE_MCS_CCK_MSK;

        rate_flags |=
            il4965_first_antenna(il->hw_params.
                                 valid_tx_ant) << RATE_MCS_ANT_POS;
        rate_n_flags = cpu_to_le32(il_rates[r].plcp | rate_flags);
        for (i = 0; i < LINK_QUAL_MAX_RETRY_NUM; i++)
                link_cmd->rs_table[i].rate_n_flags = rate_n_flags;

        link_cmd->general_params.single_stream_ant_msk =
            il4965_first_antenna(il->hw_params.valid_tx_ant);

        link_cmd->general_params.dual_stream_ant_msk =
            il->hw_params.valid_tx_ant & ~il4965_first_antenna(il->hw_params.
                                                               valid_tx_ant);
        if (!link_cmd->general_params.dual_stream_ant_msk) {
                link_cmd->general_params.dual_stream_ant_msk = ANT_AB;
        } else if (il4965_num_of_ant(il->hw_params.valid_tx_ant) == 2) {
                link_cmd->general_params.dual_stream_ant_msk =
                    il->hw_params.valid_tx_ant;
        }

        link_cmd->agg_params.agg_dis_start_th = LINK_QUAL_AGG_DISABLE_START_DEF;
        link_cmd->agg_params.agg_time_limit =
            cpu_to_le16(LINK_QUAL_AGG_TIME_LIMIT_DEF);

        link_cmd->sta_id = sta_id;

        return link_cmd;
}

/*
 * il4965_add_bssid_station - Add the special IBSS BSSID station
 *
 * Function sleeps.
 */
int
il4965_add_bssid_station(struct il_priv *il, const u8 *addr, u8 *sta_id_r)
{
        int ret;
        u8 sta_id;
        struct il_link_quality_cmd *link_cmd;
        unsigned long flags;

        if (sta_id_r)
                *sta_id_r = IL_INVALID_STATION;

        ret = il_add_station_common(il, addr, 0, NULL, &sta_id);
        if (ret) {
                IL_ERR("Unable to add station %pM\n", addr);
                return ret;
        }

        if (sta_id_r)
                *sta_id_r = sta_id;

        spin_lock_irqsave(&il->sta_lock, flags);
        il->stations[sta_id].used |= IL_STA_LOCAL;
        spin_unlock_irqrestore(&il->sta_lock, flags);

        /* Set up default rate scaling table in device's station table */
        link_cmd = il4965_sta_alloc_lq(il, sta_id);
        if (!link_cmd) {
                IL_ERR("Unable to initialize rate scaling for station %pM.\n",
                       addr);
                return -ENOMEM;
        }

        ret = il_send_lq_cmd(il, link_cmd, CMD_SYNC, true);
        if (ret)
                IL_ERR("Link quality command failed (%d)\n", ret);

        spin_lock_irqsave(&il->sta_lock, flags);
        il->stations[sta_id].lq = link_cmd;
        spin_unlock_irqrestore(&il->sta_lock, flags);

        return 0;
}

static int
il4965_static_wepkey_cmd(struct il_priv *il, bool send_if_empty)
{
        int i;
        u8 buff[sizeof(struct il_wep_cmd) +
                sizeof(struct il_wep_key) * WEP_KEYS_MAX];
        struct il_wep_cmd *wep_cmd = (struct il_wep_cmd *)buff;
        size_t cmd_size = sizeof(struct il_wep_cmd);
        struct il_host_cmd cmd = {
                .id = C_WEPKEY,
                .data = wep_cmd,
                .flags = CMD_SYNC,
        };
        bool not_empty = false;

        might_sleep();

        memset(wep_cmd, 0,
               cmd_size + (sizeof(struct il_wep_key) * WEP_KEYS_MAX));

        for (i = 0; i < WEP_KEYS_MAX; i++) {
                u8 key_size = il->_4965.wep_keys[i].key_size;

                wep_cmd->key[i].key_idx = i;
                if (key_size) {
                        wep_cmd->key[i].key_offset = i;
                        not_empty = true;
                } else
                        wep_cmd->key[i].key_offset = WEP_INVALID_OFFSET;

                wep_cmd->key[i].key_size = key_size;
                memcpy(&wep_cmd->key[i].key[3], il->_4965.wep_keys[i].key, key_size);
        }

        wep_cmd->global_key_type = WEP_KEY_WEP_TYPE;
        wep_cmd->num_keys = WEP_KEYS_MAX;

        cmd_size += sizeof(struct il_wep_key) * WEP_KEYS_MAX;
        cmd.len = cmd_size;

        if (not_empty || send_if_empty)
                return il_send_cmd(il, &cmd);
        else
                return 0;
}

int
il4965_restore_default_wep_keys(struct il_priv *il)
{
        lockdep_assert_held(&il->mutex);

        return il4965_static_wepkey_cmd(il, false);
}

int
il4965_remove_default_wep_key(struct il_priv *il,
                              struct ieee80211_key_conf *keyconf)
{
        int ret;
        int idx = keyconf->keyidx;

        lockdep_assert_held(&il->mutex);

        D_WEP("Removing default WEP key: idx=%d\n", idx);

        memset(&il->_4965.wep_keys[idx], 0, sizeof(struct il_wep_key));
        if (il_is_rfkill(il)) {
                D_WEP("Not sending C_WEPKEY command due to RFKILL.\n");
                /* but keys in device are clear anyway so return success */
                return 0;
        }
        ret = il4965_static_wepkey_cmd(il, 1);
        D_WEP("Remove default WEP key: idx=%d ret=%d\n", idx, ret);

        return ret;
}

int
il4965_set_default_wep_key(struct il_priv *il,
                           struct ieee80211_key_conf *keyconf)
{
        int ret;
        int len = keyconf->keylen;
        int idx = keyconf->keyidx;

        lockdep_assert_held(&il->mutex);

        if (len != WEP_KEY_LEN_128 && len != WEP_KEY_LEN_64) {
                D_WEP("Bad WEP key length %d\n", keyconf->keylen);
                return -EINVAL;
        }

        keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV;
        keyconf->hw_key_idx = HW_KEY_DEFAULT;
        il->stations[IL_AP_ID].keyinfo.cipher = keyconf->cipher;

        il->_4965.wep_keys[idx].key_size = len;
        memcpy(&il->_4965.wep_keys[idx].key, &keyconf->key, len);

        ret = il4965_static_wepkey_cmd(il, false);

        D_WEP("Set default WEP key: len=%d idx=%d ret=%d\n", len, idx, ret);
        return ret;
}

static int
il4965_set_wep_dynamic_key_info(struct il_priv *il,
                                struct ieee80211_key_conf *keyconf, u8 sta_id)
{
        unsigned long flags;
        __le16 key_flags = 0;
        struct il_addsta_cmd sta_cmd;

        lockdep_assert_held(&il->mutex);

        keyconf->flags &= ~IEEE80211_KEY_FLAG_GENERATE_IV;

        key_flags |= (STA_KEY_FLG_WEP | STA_KEY_FLG_MAP_KEY_MSK);
        key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
        key_flags &= ~STA_KEY_FLG_INVALID;

        if (keyconf->keylen == WEP_KEY_LEN_128)
                key_flags |= STA_KEY_FLG_KEY_SIZE_MSK;

        if (sta_id == il->hw_params.bcast_id)
                key_flags |= STA_KEY_MULTICAST_MSK;

        spin_lock_irqsave(&il->sta_lock, flags);

        il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
        il->stations[sta_id].keyinfo.keylen = keyconf->keylen;
        il->stations[sta_id].keyinfo.keyidx = keyconf->keyidx;

        memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);

        memcpy(&il->stations[sta_id].sta.key.key[3], keyconf->key,
               keyconf->keylen);

        if ((il->stations[sta_id].sta.key.
             key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
                il->stations[sta_id].sta.key.key_offset =
                    il_get_free_ucode_key_idx(il);
        /* else, we are overriding an existing key => no need to allocated room
         * in uCode. */

        WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
             "no space for a new key");

        il->stations[sta_id].sta.key.key_flags = key_flags;
        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;

        memcpy(&sta_cmd, &il->stations[sta_id].sta,
               sizeof(struct il_addsta_cmd));
        spin_unlock_irqrestore(&il->sta_lock, flags);

        return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
}

static int
il4965_set_ccmp_dynamic_key_info(struct il_priv *il,
                                 struct ieee80211_key_conf *keyconf, u8 sta_id)
{
        unsigned long flags;
        __le16 key_flags = 0;
        struct il_addsta_cmd sta_cmd;

        lockdep_assert_held(&il->mutex);

        key_flags |= (STA_KEY_FLG_CCMP | STA_KEY_FLG_MAP_KEY_MSK);
        key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
        key_flags &= ~STA_KEY_FLG_INVALID;

        if (sta_id == il->hw_params.bcast_id)
                key_flags |= STA_KEY_MULTICAST_MSK;

        keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;

        spin_lock_irqsave(&il->sta_lock, flags);
        il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
        il->stations[sta_id].keyinfo.keylen = keyconf->keylen;

        memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, keyconf->keylen);

        memcpy(il->stations[sta_id].sta.key.key, keyconf->key, keyconf->keylen);

        if ((il->stations[sta_id].sta.key.
             key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
                il->stations[sta_id].sta.key.key_offset =
                    il_get_free_ucode_key_idx(il);
        /* else, we are overriding an existing key => no need to allocated room
         * in uCode. */

        WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
             "no space for a new key");

        il->stations[sta_id].sta.key.key_flags = key_flags;
        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;

        memcpy(&sta_cmd, &il->stations[sta_id].sta,
               sizeof(struct il_addsta_cmd));
        spin_unlock_irqrestore(&il->sta_lock, flags);

        return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
}

static int
il4965_set_tkip_dynamic_key_info(struct il_priv *il,
                                 struct ieee80211_key_conf *keyconf, u8 sta_id)
{
        unsigned long flags;
        __le16 key_flags = 0;

        key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
        key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
        key_flags &= ~STA_KEY_FLG_INVALID;

        if (sta_id == il->hw_params.bcast_id)
                key_flags |= STA_KEY_MULTICAST_MSK;

        keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
        keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;

        spin_lock_irqsave(&il->sta_lock, flags);

        il->stations[sta_id].keyinfo.cipher = keyconf->cipher;
        il->stations[sta_id].keyinfo.keylen = 16;

        if ((il->stations[sta_id].sta.key.
             key_flags & STA_KEY_FLG_ENCRYPT_MSK) == STA_KEY_FLG_NO_ENC)
                il->stations[sta_id].sta.key.key_offset =
                    il_get_free_ucode_key_idx(il);
        /* else, we are overriding an existing key => no need to allocated room
         * in uCode. */

        WARN(il->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
             "no space for a new key");

        il->stations[sta_id].sta.key.key_flags = key_flags;

        /* This copy is acutally not needed: we get the key with each TX */
        memcpy(il->stations[sta_id].keyinfo.key, keyconf->key, 16);

        memcpy(il->stations[sta_id].sta.key.key, keyconf->key, 16);

        spin_unlock_irqrestore(&il->sta_lock, flags);

        return 0;
}

void
il4965_update_tkip_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
                       struct ieee80211_sta *sta, u32 iv32, u16 *phase1key)
{
        u8 sta_id;
        unsigned long flags;
        int i;

        if (il_scan_cancel(il)) {
                /* cancel scan failed, just live w/ bad key and rely
                   briefly on SW decryption */
                return;
        }

        sta_id = il_sta_id_or_broadcast(il, sta);
        if (sta_id == IL_INVALID_STATION)
                return;

        spin_lock_irqsave(&il->sta_lock, flags);

        il->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32;

        for (i = 0; i < 5; i++)
                il->stations[sta_id].sta.key.tkip_rx_ttak[i] =
                    cpu_to_le16(phase1key[i]);

        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;

        il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);

        spin_unlock_irqrestore(&il->sta_lock, flags);
}

int
il4965_remove_dynamic_key(struct il_priv *il,
                          struct ieee80211_key_conf *keyconf, u8 sta_id)
{
        unsigned long flags;
        u16 key_flags;
        u8 keyidx;
        struct il_addsta_cmd sta_cmd;

        lockdep_assert_held(&il->mutex);

        il->_4965.key_mapping_keys--;

        spin_lock_irqsave(&il->sta_lock, flags);
        key_flags = le16_to_cpu(il->stations[sta_id].sta.key.key_flags);
        keyidx = (key_flags >> STA_KEY_FLG_KEYID_POS) & 0x3;

        D_WEP("Remove dynamic key: idx=%d sta=%d\n", keyconf->keyidx, sta_id);

        if (keyconf->keyidx != keyidx) {
                /* We need to remove a key with idx different that the one
                 * in the uCode. This means that the key we need to remove has
                 * been replaced by another one with different idx.
                 * Don't do anything and return ok
                 */
                spin_unlock_irqrestore(&il->sta_lock, flags);
                return 0;
        }

        if (il->stations[sta_id].sta.key.key_flags & STA_KEY_FLG_INVALID) {
                IL_WARN("Removing wrong key %d 0x%x\n", keyconf->keyidx,
                        key_flags);
                spin_unlock_irqrestore(&il->sta_lock, flags);
                return 0;
        }

        if (!test_and_clear_bit
            (il->stations[sta_id].sta.key.key_offset, &il->ucode_key_table))
                IL_ERR("idx %d not used in uCode key table.\n",
                       il->stations[sta_id].sta.key.key_offset);
        memset(&il->stations[sta_id].keyinfo, 0, sizeof(struct il_hw_key));
        memset(&il->stations[sta_id].sta.key, 0, sizeof(struct il4965_keyinfo));
        il->stations[sta_id].sta.key.key_flags =
            STA_KEY_FLG_NO_ENC | STA_KEY_FLG_INVALID;
        il->stations[sta_id].sta.key.key_offset = keyconf->hw_key_idx;
        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_KEY_MASK;
        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;

        if (il_is_rfkill(il)) {
                D_WEP
                    ("Not sending C_ADD_STA command because RFKILL enabled.\n");
                spin_unlock_irqrestore(&il->sta_lock, flags);
                return 0;
        }
        memcpy(&sta_cmd, &il->stations[sta_id].sta,
               sizeof(struct il_addsta_cmd));
        spin_unlock_irqrestore(&il->sta_lock, flags);

        return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
}

int
il4965_set_dynamic_key(struct il_priv *il, struct ieee80211_key_conf *keyconf,
                       u8 sta_id)
{
        int ret;

        lockdep_assert_held(&il->mutex);

        il->_4965.key_mapping_keys++;
        keyconf->hw_key_idx = HW_KEY_DYNAMIC;

        switch (keyconf->cipher) {
        case WLAN_CIPHER_SUITE_CCMP:
                ret =
                    il4965_set_ccmp_dynamic_key_info(il, keyconf, sta_id);
                break;
        case WLAN_CIPHER_SUITE_TKIP:
                ret =
                    il4965_set_tkip_dynamic_key_info(il, keyconf, sta_id);
                break;
        case WLAN_CIPHER_SUITE_WEP40:
        case WLAN_CIPHER_SUITE_WEP104:
                ret = il4965_set_wep_dynamic_key_info(il, keyconf, sta_id);
                break;
        default:
                IL_ERR("Unknown alg: %s cipher = %x\n", __func__,
                       keyconf->cipher);
                ret = -EINVAL;
        }

        D_WEP("Set dynamic key: cipher=%x len=%d idx=%d sta=%d ret=%d\n",
              keyconf->cipher, keyconf->keylen, keyconf->keyidx, sta_id, ret);

        return ret;
}

/*
 * il4965_alloc_bcast_station - add broadcast station into driver's station table.
 *
 * This adds the broadcast station into the driver's station table
 * and marks it driver active, so that it will be restored to the
 * device at the next best time.
 */
int
il4965_alloc_bcast_station(struct il_priv *il)
{
        struct il_link_quality_cmd *link_cmd;
        unsigned long flags;
        u8 sta_id;

        spin_lock_irqsave(&il->sta_lock, flags);
        sta_id = il_prep_station(il, il_bcast_addr, false, NULL);
        if (sta_id == IL_INVALID_STATION) {
                IL_ERR("Unable to prepare broadcast station\n");
                spin_unlock_irqrestore(&il->sta_lock, flags);

                return -EINVAL;
        }

        il->stations[sta_id].used |= IL_STA_DRIVER_ACTIVE;
        il->stations[sta_id].used |= IL_STA_BCAST;
        spin_unlock_irqrestore(&il->sta_lock, flags);

        link_cmd = il4965_sta_alloc_lq(il, sta_id);
        if (!link_cmd) {
                IL_ERR
                    ("Unable to initialize rate scaling for bcast station.\n");
                return -ENOMEM;
        }

        spin_lock_irqsave(&il->sta_lock, flags);
        il->stations[sta_id].lq = link_cmd;
        spin_unlock_irqrestore(&il->sta_lock, flags);

        return 0;
}

/*
 * il4965_update_bcast_station - update broadcast station's LQ command
 *
 * Only used by iwl4965. Placed here to have all bcast station management
 * code together.
 */
static int
il4965_update_bcast_station(struct il_priv *il)
{
        unsigned long flags;
        struct il_link_quality_cmd *link_cmd;
        u8 sta_id = il->hw_params.bcast_id;

        link_cmd = il4965_sta_alloc_lq(il, sta_id);
        if (!link_cmd) {
                IL_ERR("Unable to initialize rate scaling for bcast sta.\n");
                return -ENOMEM;
        }

        spin_lock_irqsave(&il->sta_lock, flags);
        if (il->stations[sta_id].lq)
                kfree(il->stations[sta_id].lq);
        else
                D_INFO("Bcast sta rate scaling has not been initialized.\n");
        il->stations[sta_id].lq = link_cmd;
        spin_unlock_irqrestore(&il->sta_lock, flags);

        return 0;
}

int
il4965_update_bcast_stations(struct il_priv *il)
{
        return il4965_update_bcast_station(il);
}

/*
 * il4965_sta_tx_modify_enable_tid - Enable Tx for this TID in station table
 */
int
il4965_sta_tx_modify_enable_tid(struct il_priv *il, int sta_id, int tid)
{
        unsigned long flags;
        struct il_addsta_cmd sta_cmd;

        lockdep_assert_held(&il->mutex);

        /* Remove "disable" flag, to enable Tx for this TID */
        spin_lock_irqsave(&il->sta_lock, flags);
        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_TID_DISABLE_TX;
        il->stations[sta_id].sta.tid_disable_tx &= cpu_to_le16(~(1 << tid));
        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
        memcpy(&sta_cmd, &il->stations[sta_id].sta,
               sizeof(struct il_addsta_cmd));
        spin_unlock_irqrestore(&il->sta_lock, flags);

        return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
}

int
il4965_sta_rx_agg_start(struct il_priv *il, struct ieee80211_sta *sta, int tid,
                        u16 ssn)
{
        unsigned long flags;
        int sta_id;
        struct il_addsta_cmd sta_cmd;

        lockdep_assert_held(&il->mutex);

        sta_id = il_sta_id(sta);
        if (sta_id == IL_INVALID_STATION)
                return -ENXIO;

        spin_lock_irqsave(&il->sta_lock, flags);
        il->stations[sta_id].sta.station_flags_msk = 0;
        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_ADDBA_TID_MSK;
        il->stations[sta_id].sta.add_immediate_ba_tid = (u8) tid;
        il->stations[sta_id].sta.add_immediate_ba_ssn = cpu_to_le16(ssn);
        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
        memcpy(&sta_cmd, &il->stations[sta_id].sta,
               sizeof(struct il_addsta_cmd));
        spin_unlock_irqrestore(&il->sta_lock, flags);

        return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
}

int
il4965_sta_rx_agg_stop(struct il_priv *il, struct ieee80211_sta *sta, int tid)
{
        unsigned long flags;
        int sta_id;
        struct il_addsta_cmd sta_cmd;

        lockdep_assert_held(&il->mutex);

        sta_id = il_sta_id(sta);
        if (sta_id == IL_INVALID_STATION) {
                IL_ERR("Invalid station for AGG tid %d\n", tid);
                return -ENXIO;
        }

        spin_lock_irqsave(&il->sta_lock, flags);
        il->stations[sta_id].sta.station_flags_msk = 0;
        il->stations[sta_id].sta.sta.modify_mask = STA_MODIFY_DELBA_TID_MSK;
        il->stations[sta_id].sta.remove_immediate_ba_tid = (u8) tid;
        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
        memcpy(&sta_cmd, &il->stations[sta_id].sta,
               sizeof(struct il_addsta_cmd));
        spin_unlock_irqrestore(&il->sta_lock, flags);

        return il_send_add_sta(il, &sta_cmd, CMD_SYNC);
}

void
il4965_sta_modify_sleep_tx_count(struct il_priv *il, int sta_id, int cnt)
{
        unsigned long flags;

        spin_lock_irqsave(&il->sta_lock, flags);
        il->stations[sta_id].sta.station_flags |= STA_FLG_PWR_SAVE_MSK;
        il->stations[sta_id].sta.station_flags_msk = STA_FLG_PWR_SAVE_MSK;
        il->stations[sta_id].sta.sta.modify_mask =
            STA_MODIFY_SLEEP_TX_COUNT_MSK;
        il->stations[sta_id].sta.sleep_tx_count = cpu_to_le16(cnt);
        il->stations[sta_id].sta.mode = STA_CONTROL_MODIFY_MSK;
        il_send_add_sta(il, &il->stations[sta_id].sta, CMD_ASYNC);
        spin_unlock_irqrestore(&il->sta_lock, flags);

}

void
il4965_update_chain_flags(struct il_priv *il)
{
        if (il->ops->set_rxon_chain) {
                il->ops->set_rxon_chain(il);
                if (il->active.rx_chain != il->staging.rx_chain)
                        il_commit_rxon(il);
        }
}

static void
il4965_clear_free_frames(struct il_priv *il)
{
        struct list_head *element;

        D_INFO("%d frames on pre-allocated heap on clear.\n", il->frames_count);

        while (!list_empty(&il->free_frames)) {
                element = il->free_frames.next;
                list_del(element);
                kfree(list_entry(element, struct il_frame, list));
                il->frames_count--;
        }

        if (il->frames_count) {
                IL_WARN("%d frames still in use.  Did we lose one?\n",
                        il->frames_count);
                il->frames_count = 0;
        }
}

static struct il_frame *
il4965_get_free_frame(struct il_priv *il)
{
        struct il_frame *frame;
        struct list_head *element;
        if (list_empty(&il->free_frames)) {
                frame = kzalloc_obj(*frame);
                if (!frame) {
                        IL_ERR("Could not allocate frame!\n");
                        return NULL;
                }

                il->frames_count++;
                return frame;
        }

        element = il->free_frames.next;
        list_del(element);
        return list_entry(element, struct il_frame, list);
}

static void
il4965_free_frame(struct il_priv *il, struct il_frame *frame)
{
        memset(frame, 0, sizeof(*frame));
        list_add(&frame->list, &il->free_frames);
}

static u32
il4965_fill_beacon_frame(struct il_priv *il, struct ieee80211_hdr *hdr,
                         int left)
{
        lockdep_assert_held(&il->mutex);

        if (!il->beacon_skb)
                return 0;

        if (il->beacon_skb->len > left)
                return 0;

        memcpy(hdr, il->beacon_skb->data, il->beacon_skb->len);

        return il->beacon_skb->len;
}

/* Parse the beacon frame to find the TIM element and set tim_idx & tim_size */
static void
il4965_set_beacon_tim(struct il_priv *il,
                      struct il_tx_beacon_cmd *tx_beacon_cmd, u8 * beacon,
                      u32 frame_size)
{
        u16 tim_idx;
        struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)beacon;

        /*
         * The idx is relative to frame start but we start looking at the
         * variable-length part of the beacon.
         */
        tim_idx = mgmt->u.beacon.variable - beacon;

        /* Parse variable-length elements of beacon to find WLAN_EID_TIM */
        while ((tim_idx < (frame_size - 2)) &&
               (beacon[tim_idx] != WLAN_EID_TIM))
                tim_idx += beacon[tim_idx + 1] + 2;

        /* If TIM field was found, set variables */
        if ((tim_idx < (frame_size - 1)) && (beacon[tim_idx] == WLAN_EID_TIM)) {
                tx_beacon_cmd->tim_idx = cpu_to_le16(tim_idx);
                tx_beacon_cmd->tim_size = beacon[tim_idx + 1];
        } else
                IL_WARN("Unable to find TIM Element in beacon\n");
}

static unsigned int
il4965_hw_get_beacon_cmd(struct il_priv *il, struct il_frame *frame)
{
        struct il_tx_beacon_cmd *tx_beacon_cmd;
        u32 frame_size;
        u32 rate_flags;
        u32 rate;
        /*
         * We have to set up the TX command, the TX Beacon command, and the
         * beacon contents.
         */

        lockdep_assert_held(&il->mutex);

        if (!il->beacon_enabled) {
                IL_ERR("Trying to build beacon without beaconing enabled\n");
                return 0;
        }

        /* Initialize memory */
        tx_beacon_cmd = &frame->u.beacon;
        memset(tx_beacon_cmd, 0, sizeof(*tx_beacon_cmd));

        /* Set up TX beacon contents */
        frame_size =
            il4965_fill_beacon_frame(il, tx_beacon_cmd->frame,
                                     sizeof(frame->u) - sizeof(*tx_beacon_cmd));
        if (WARN_ON_ONCE(frame_size > MAX_MPDU_SIZE))
                return 0;
        if (!frame_size)
                return 0;

        /* Set up TX command fields */
        tx_beacon_cmd->tx.len = cpu_to_le16((u16) frame_size);
        tx_beacon_cmd->tx.sta_id = il->hw_params.bcast_id;
        tx_beacon_cmd->tx.stop_time.life_time = TX_CMD_LIFE_TIME_INFINITE;
        tx_beacon_cmd->tx.tx_flags =
            TX_CMD_FLG_SEQ_CTL_MSK | TX_CMD_FLG_TSF_MSK |
            TX_CMD_FLG_STA_RATE_MSK;

        /* Set up TX beacon command fields */
        il4965_set_beacon_tim(il, tx_beacon_cmd, (u8 *) tx_beacon_cmd->frame,
                              frame_size);

        /* Set up packet rate and flags */
        rate = il_get_lowest_plcp(il);
        il4965_toggle_tx_ant(il, &il->mgmt_tx_ant, il->hw_params.valid_tx_ant);
        rate_flags = BIT(il->mgmt_tx_ant) << RATE_MCS_ANT_POS;
        if ((rate >= IL_FIRST_CCK_RATE) && (rate <= IL_LAST_CCK_RATE))
                rate_flags |= RATE_MCS_CCK_MSK;
        tx_beacon_cmd->tx.rate_n_flags = cpu_to_le32(rate | rate_flags);

        return sizeof(*tx_beacon_cmd) + frame_size;
}

int
il4965_send_beacon_cmd(struct il_priv *il)
{
        struct il_frame *frame;
        unsigned int frame_size;
        int rc;

        frame = il4965_get_free_frame(il);
        if (!frame) {
                IL_ERR("Could not obtain free frame buffer for beacon "
                       "command.\n");
                return -ENOMEM;
        }

        frame_size = il4965_hw_get_beacon_cmd(il, frame);
        if (!frame_size) {
                IL_ERR("Error configuring the beacon command\n");
                il4965_free_frame(il, frame);
                return -EINVAL;
        }

        rc = il_send_cmd_pdu(il, C_TX_BEACON, frame_size, &frame->u.cmd[0]);

        il4965_free_frame(il, frame);

        return rc;
}

static inline dma_addr_t
il4965_tfd_tb_get_addr(struct il_tfd *tfd, u8 idx)
{
        struct il_tfd_tb *tb = &tfd->tbs[idx];

        dma_addr_t addr = get_unaligned_le32(&tb->lo);
        if (sizeof(dma_addr_t) > sizeof(u32))
                addr |=
                    ((dma_addr_t) (le16_to_cpu(tb->hi_n_len) & 0xF) << 16) <<
                    16;

        return addr;
}

static inline u16
il4965_tfd_tb_get_len(struct il_tfd *tfd, u8 idx)
{
        struct il_tfd_tb *tb = &tfd->tbs[idx];

        return le16_to_cpu(tb->hi_n_len) >> 4;
}

static inline void
il4965_tfd_set_tb(struct il_tfd *tfd, u8 idx, dma_addr_t addr, u16 len)
{
        struct il_tfd_tb *tb = &tfd->tbs[idx];
        u16 hi_n_len = len << 4;

        put_unaligned_le32(addr, &tb->lo);
        if (sizeof(dma_addr_t) > sizeof(u32))
                hi_n_len |= ((addr >> 16) >> 16) & 0xF;

        tb->hi_n_len = cpu_to_le16(hi_n_len);

        tfd->num_tbs = idx + 1;
}

static inline u8
il4965_tfd_get_num_tbs(struct il_tfd *tfd)
{
        return tfd->num_tbs & 0x1f;
}

/*
 * il4965_hw_txq_free_tfd - Free all chunks referenced by TFD [txq->q.read_ptr]
 *
 * Does NOT advance any TFD circular buffer read/write idxes
 * Does NOT free the TFD itself (which is within circular buffer)
 */
void
il4965_hw_txq_free_tfd(struct il_priv *il, struct il_tx_queue *txq)
{
        struct il_tfd *tfd_tmp = (struct il_tfd *)txq->tfds;
        struct il_tfd *tfd;
        struct pci_dev *dev = il->pci_dev;
        int idx = txq->q.read_ptr;
        int i;
        int num_tbs;

        tfd = &tfd_tmp[idx];

        /* Sanity check on number of chunks */
        num_tbs = il4965_tfd_get_num_tbs(tfd);

        if (num_tbs >= IL_NUM_OF_TBS) {
                IL_ERR("Too many chunks: %i\n", num_tbs);
                /* @todo issue fatal error, it is quite serious situation */
                return;
        }

        /* Unmap tx_cmd */
        if (num_tbs)
                dma_unmap_single(&dev->dev,
                                 dma_unmap_addr(&txq->meta[idx], mapping),
                                 dma_unmap_len(&txq->meta[idx], len),
                                 DMA_BIDIRECTIONAL);

        /* Unmap chunks, if any. */
        for (i = 1; i < num_tbs; i++)
                dma_unmap_single(&dev->dev, il4965_tfd_tb_get_addr(tfd, i),
                                 il4965_tfd_tb_get_len(tfd, i), DMA_TO_DEVICE);

        /* free SKB */
        if (txq->skbs) {
                struct sk_buff *skb = txq->skbs[txq->q.read_ptr];

                /* can be called from irqs-disabled context */
                if (skb) {
                        dev_kfree_skb_any(skb);
                        txq->skbs[txq->q.read_ptr] = NULL;
                }
        }
}

int
il4965_hw_txq_attach_buf_to_tfd(struct il_priv *il, struct il_tx_queue *txq,
                                dma_addr_t addr, u16 len, u8 reset, u8 pad)
{
        struct il_queue *q;
        struct il_tfd *tfd, *tfd_tmp;
        u32 num_tbs;

        q = &txq->q;
        tfd_tmp = (struct il_tfd *)txq->tfds;
        tfd = &tfd_tmp[q->write_ptr];

        if (reset)
                memset(tfd, 0, sizeof(*tfd));

        num_tbs = il4965_tfd_get_num_tbs(tfd);

        /* Each TFD can point to a maximum 20 Tx buffers */
        if (num_tbs >= IL_NUM_OF_TBS) {
                IL_ERR("Error can not send more than %d chunks\n",
                       IL_NUM_OF_TBS);
                return -EINVAL;
        }

        BUG_ON(addr & ~DMA_BIT_MASK(36));
        if (unlikely(addr & ~IL_TX_DMA_MASK))
                IL_ERR("Unaligned address = %llx\n", (unsigned long long)addr);

        il4965_tfd_set_tb(tfd, num_tbs, addr, len);

        return 0;
}

/*
 * Tell nic where to find circular buffer of Tx Frame Descriptors for
 * given Tx queue, and enable the DMA channel used for that queue.
 *
 * 4965 supports up to 16 Tx queues in DRAM, mapped to up to 8 Tx DMA
 * channels supported in hardware.
 */
int
il4965_hw_tx_queue_init(struct il_priv *il, struct il_tx_queue *txq)
{
        int txq_id = txq->q.id;

        /* Circular buffer (TFD queue in DRAM) physical base address */
        il_wr(il, FH49_MEM_CBBC_QUEUE(txq_id), txq->q.dma_addr >> 8);

        return 0;
}

/******************************************************************************
 *
 * Generic RX handler implementations
 *
 ******************************************************************************/
static void
il4965_hdl_alive(struct il_priv *il, struct il_rx_buf *rxb)
{
        struct il_rx_pkt *pkt = rxb_addr(rxb);
        struct il_alive_resp *palive;
        struct delayed_work *pwork;

        palive = &pkt->u.alive_frame;

        D_INFO("Alive ucode status 0x%08X revision " "0x%01X 0x%01X\n",
               palive->is_valid, palive->ver_type, palive->ver_subtype);

        if (palive->ver_subtype == INITIALIZE_SUBTYPE) {
                D_INFO("Initialization Alive received.\n");
                memcpy(&il->card_alive_init, &pkt->u.raw,
                       sizeof(struct il_init_alive_resp));
                pwork = &il->init_alive_start;
        } else {
                D_INFO("Runtime Alive received.\n");
                memcpy(&il->card_alive, &pkt->u.alive_frame,
                       sizeof(struct il_alive_resp));
                pwork = &il->alive_start;
        }

        /* We delay the ALIVE response by 5ms to
         * give the HW RF Kill time to activate... */
        if (palive->is_valid == UCODE_VALID_OK)
                queue_delayed_work(il->workqueue, pwork, msecs_to_jiffies(5));
        else
                IL_WARN("uCode did not respond OK.\n");
}

/*
 * il4965_bg_stats_periodic - Timer callback to queue stats
 *
 * This callback is provided in order to send a stats request.
 *
 * This timer function is continually reset to execute within
 * 60 seconds since the last N_STATS was received.  We need to
 * ensure we receive the stats in order to update the temperature
 * used for calibrating the TXPOWER.
 */
static void
il4965_bg_stats_periodic(struct timer_list *t)
{
        struct il_priv *il = timer_container_of(il, t, stats_periodic);

        if (test_bit(S_EXIT_PENDING, &il->status))
                return;

        /* dont send host command if rf-kill is on */
        if (!il_is_ready_rf(il))
                return;

        il_send_stats_request(il, CMD_ASYNC, false);
}

static void
il4965_hdl_beacon(struct il_priv *il, struct il_rx_buf *rxb)
{
        struct il_rx_pkt *pkt = rxb_addr(rxb);
        struct il4965_beacon_notif *beacon =
            (struct il4965_beacon_notif *)pkt->u.raw;
#ifdef CONFIG_IWLEGACY_DEBUG
        u8 rate = il4965_hw_get_rate(beacon->beacon_notify_hdr.rate_n_flags);

        D_RX("beacon status %x retries %d iss %d tsf:0x%.8x%.8x rate %d\n",
             le32_to_cpu(beacon->beacon_notify_hdr.u.status) & TX_STATUS_MSK,
             beacon->beacon_notify_hdr.failure_frame,
             le32_to_cpu(beacon->ibss_mgr_status),
             le32_to_cpu(beacon->high_tsf), le32_to_cpu(beacon->low_tsf), rate);
#endif
        il->ibss_manager = le32_to_cpu(beacon->ibss_mgr_status);
}

static void
il4965_perform_ct_kill_task(struct il_priv *il)
{
        unsigned long flags;

        D_POWER("Stop all queues\n");

        if (il->mac80211_registered)
                ieee80211_stop_queues(il->hw);

        _il_wr(il, CSR_UCODE_DRV_GP1_SET,
               CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
        _il_rd(il, CSR_UCODE_DRV_GP1);

        spin_lock_irqsave(&il->reg_lock, flags);
        if (likely(_il_grab_nic_access(il)))
                _il_release_nic_access(il);
        spin_unlock_irqrestore(&il->reg_lock, flags);
}

/* Handle notification from uCode that card's power state is changing
 * due to software, hardware, or critical temperature RFKILL */
static void
il4965_hdl_card_state(struct il_priv *il, struct il_rx_buf *rxb)
{
        struct il_rx_pkt *pkt = rxb_addr(rxb);
        u32 flags = le32_to_cpu(pkt->u.card_state_notif.flags);
        unsigned long status = il->status;

        D_RF_KILL("Card state received: HW:%s SW:%s CT:%s\n",
                  (flags & HW_CARD_DISABLED) ? "Kill" : "On",
                  (flags & SW_CARD_DISABLED) ? "Kill" : "On",
                  (flags & CT_CARD_DISABLED) ? "Reached" : "Not reached");

        if (flags & (SW_CARD_DISABLED | HW_CARD_DISABLED | CT_CARD_DISABLED)) {

                _il_wr(il, CSR_UCODE_DRV_GP1_SET,
                       CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);

                il_wr(il, HBUS_TARG_MBX_C, HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);

                if (!(flags & RXON_CARD_DISABLED)) {
                        _il_wr(il, CSR_UCODE_DRV_GP1_CLR,
                               CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);
                        il_wr(il, HBUS_TARG_MBX_C,
                              HBUS_TARG_MBX_C_REG_BIT_CMD_BLOCKED);
                }
        }

        if (flags & CT_CARD_DISABLED)
                il4965_perform_ct_kill_task(il);

        if (flags & HW_CARD_DISABLED)
                set_bit(S_RFKILL, &il->status);
        else
                clear_bit(S_RFKILL, &il->status);

        if (!(flags & RXON_CARD_DISABLED))
                il_scan_cancel(il);

        if ((test_bit(S_RFKILL, &status) !=
             test_bit(S_RFKILL, &il->status)))
                wiphy_rfkill_set_hw_state(il->hw->wiphy,
                                          test_bit(S_RFKILL, &il->status));
        else
                wake_up(&il->wait_command_queue);
}

/*
 * il4965_setup_handlers - Initialize Rx handler callbacks
 *
 * Setup the RX handlers for each of the reply types sent from the uCode
 * to the host.
 *
 * This function chains into the hardware specific files for them to setup
 * any hardware specific handlers as well.
 */
static void
il4965_setup_handlers(struct il_priv *il)
{
        il->handlers[N_ALIVE] = il4965_hdl_alive;
        il->handlers[N_ERROR] = il_hdl_error;
        il->handlers[N_CHANNEL_SWITCH] = il_hdl_csa;
        il->handlers[N_SPECTRUM_MEASUREMENT] = il_hdl_spectrum_measurement;
        il->handlers[N_PM_SLEEP] = il_hdl_pm_sleep;
        il->handlers[N_PM_DEBUG_STATS] = il_hdl_pm_debug_stats;
        il->handlers[N_BEACON] = il4965_hdl_beacon;

        /*
         * The same handler is used for both the REPLY to a discrete
         * stats request from the host as well as for the periodic
         * stats notifications (after received beacons) from the uCode.
         */
        il->handlers[C_STATS] = il4965_hdl_c_stats;
        il->handlers[N_STATS] = il4965_hdl_stats;

        il_setup_rx_scan_handlers(il);

        /* status change handler */
        il->handlers[N_CARD_STATE] = il4965_hdl_card_state;

        il->handlers[N_MISSED_BEACONS] = il4965_hdl_missed_beacon;
        /* Rx handlers */
        il->handlers[N_RX_PHY] = il4965_hdl_rx_phy;
        il->handlers[N_RX_MPDU] = il4965_hdl_rx;
        il->handlers[N_RX] = il4965_hdl_rx;
        /* block ack */
        il->handlers[N_COMPRESSED_BA] = il4965_hdl_compressed_ba;
        /* Tx response */
        il->handlers[C_TX] = il4965_hdl_tx;
}

/*
 * il4965_rx_handle - Main entry function for receiving responses from uCode
 *
 * Uses the il->handlers callback function array to invoke
 * the appropriate handlers, including command responses,
 * frame-received notifications, and other notifications.
 */
void
il4965_rx_handle(struct il_priv *il)
{
        struct il_rx_buf *rxb;
        struct il_rx_pkt *pkt;
        struct il_rx_queue *rxq = &il->rxq;
        u32 r, i;
        int reclaim;
        unsigned long flags;
        u8 fill_rx = 0;
        u32 count = 8;
        int total_empty;

        /* uCode's read idx (stored in shared DRAM) indicates the last Rx
         * buffer that the driver may process (last buffer filled by ucode). */
        r = le16_to_cpu(rxq->rb_stts->closed_rb_num) & 0x0FFF;
        i = rxq->read;

        /* Rx interrupt, but nothing sent from uCode */
        if (i == r)
                D_RX("r = %d, i = %d\n", r, i);

        /* calculate total frames need to be restock after handling RX */
        total_empty = r - rxq->write_actual;
        if (total_empty < 0)
                total_empty += RX_QUEUE_SIZE;

        if (total_empty > (RX_QUEUE_SIZE / 2))
                fill_rx = 1;

        while (i != r) {
                rxb = rxq->queue[i];

                /* If an RXB doesn't have a Rx queue slot associated with it,
                 * then a bug has been introduced in the queue refilling
                 * routines -- catch it here */
                BUG_ON(rxb == NULL);

                rxq->queue[i] = NULL;

                dma_unmap_page(&il->pci_dev->dev, rxb->page_dma,
                               PAGE_SIZE << il->hw_params.rx_page_order,
                               DMA_FROM_DEVICE);
                pkt = rxb_addr(rxb);
                reclaim = il_need_reclaim(il, pkt);

                /* Based on type of command response or notification,
                 *   handle those that need handling via function in
                 *   handlers table.  See il4965_setup_handlers() */
                if (il->handlers[pkt->hdr.cmd]) {
                        D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
                             il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
                        il->isr_stats.handlers[pkt->hdr.cmd]++;
                        il->handlers[pkt->hdr.cmd] (il, rxb);
                } else {
                        /* No handling needed */
                        D_RX("r %d i %d No handler needed for %s, 0x%02x\n", r,
                             i, il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
                }

                /*
                 * XXX: After here, we should always check rxb->page
                 * against NULL before touching it or its virtual
                 * memory (pkt). Because some handler might have
                 * already taken or freed the pages.
                 */

                if (reclaim) {
                        /* Invoke any callbacks, transfer the buffer to caller,
                         * and fire off the (possibly) blocking il_send_cmd()
                         * as we reclaim the driver command queue */
                        if (rxb->page)
                                il_tx_cmd_complete(il, rxb);
                        else
                                IL_WARN("Claim null rxb?\n");
                }

                /* Reuse the page if possible. For notification packets and
                 * SKBs that fail to Rx correctly, add them back into the
                 * rx_free list for reuse later. */
                spin_lock_irqsave(&rxq->lock, flags);
                if (rxb->page != NULL) {
                        rxb->page_dma =
                            dma_map_page(&il->pci_dev->dev, rxb->page, 0,
                                         PAGE_SIZE << il->hw_params.rx_page_order,
                                         DMA_FROM_DEVICE);

                        if (unlikely(dma_mapping_error(&il->pci_dev->dev,
                                                       rxb->page_dma))) {
                                __il_free_pages(il, rxb->page);
                                rxb->page = NULL;
                                list_add_tail(&rxb->list, &rxq->rx_used);
                        } else {
                                list_add_tail(&rxb->list, &rxq->rx_free);
                                rxq->free_count++;
                        }
                } else
                        list_add_tail(&rxb->list, &rxq->rx_used);

                spin_unlock_irqrestore(&rxq->lock, flags);

                i = (i + 1) & RX_QUEUE_MASK;
                /* If there are a lot of unused frames,
                 * restock the Rx queue so ucode wont assert. */
                if (fill_rx) {
                        count++;
                        if (count >= 8) {
                                rxq->read = i;
                                il4965_rx_replenish_now(il);
                                count = 0;
                        }
                }
        }

        /* Backtrack one entry */
        rxq->read = i;
        if (fill_rx)
                il4965_rx_replenish_now(il);
        else
                il4965_rx_queue_restock(il);
}

/* call this function to flush any scheduled tasklet */
static inline void
il4965_synchronize_irq(struct il_priv *il)
{
        /* wait to make sure we flush pending tasklet */
        synchronize_irq(il->pci_dev->irq);
        tasklet_kill(&il->irq_tasklet);
}

static void
il4965_irq_tasklet(struct tasklet_struct *t)
{
        struct il_priv *il = from_tasklet(il, t, irq_tasklet);
        u32 inta, handled = 0;
        u32 inta_fh;
        unsigned long flags;
        u32 i;
#ifdef CONFIG_IWLEGACY_DEBUG
        u32 inta_mask;
#endif

        spin_lock_irqsave(&il->lock, flags);

        /* Ack/clear/reset pending uCode interrupts.
         * Note:  Some bits in CSR_INT are "OR" of bits in CSR_FH_INT_STATUS,
         *  and will clear only when CSR_FH_INT_STATUS gets cleared. */
        inta = _il_rd(il, CSR_INT);
        _il_wr(il, CSR_INT, inta);

        /* Ack/clear/reset pending flow-handler (DMA) interrupts.
         * Any new interrupts that happen after this, either while we're
         * in this tasklet, or later, will show up in next ISR/tasklet. */
        inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
        _il_wr(il, CSR_FH_INT_STATUS, inta_fh);

#ifdef CONFIG_IWLEGACY_DEBUG
        if (il_get_debug_level(il) & IL_DL_ISR) {
                /* just for debug */
                inta_mask = _il_rd(il, CSR_INT_MASK);
                D_ISR("inta 0x%08x, enabled 0x%08x, fh 0x%08x\n", inta,
                      inta_mask, inta_fh);
        }
#endif

        spin_unlock_irqrestore(&il->lock, flags);

        /* Since CSR_INT and CSR_FH_INT_STATUS reads and clears are not
         * atomic, make sure that inta covers all the interrupts that
         * we've discovered, even if FH interrupt came in just after
         * reading CSR_INT. */
        if (inta_fh & CSR49_FH_INT_RX_MASK)
                inta |= CSR_INT_BIT_FH_RX;
        if (inta_fh & CSR49_FH_INT_TX_MASK)
                inta |= CSR_INT_BIT_FH_TX;

        /* Now service all interrupt bits discovered above. */
        if (inta & CSR_INT_BIT_HW_ERR) {
                IL_ERR("Hardware error detected.  Restarting.\n");

                /* Tell the device to stop sending interrupts */
                il_disable_interrupts(il);

                il->isr_stats.hw++;
                il_irq_handle_error(il);

                handled |= CSR_INT_BIT_HW_ERR;

                return;
        }
#ifdef CONFIG_IWLEGACY_DEBUG
        if (il_get_debug_level(il) & (IL_DL_ISR)) {
                /* NIC fires this, but we don't use it, redundant with WAKEUP */
                if (inta & CSR_INT_BIT_SCD) {
                        D_ISR("Scheduler finished to transmit "
                              "the frame/frames.\n");
                        il->isr_stats.sch++;
                }

                /* Alive notification via Rx interrupt will do the real work */
                if (inta & CSR_INT_BIT_ALIVE) {
                        D_ISR("Alive interrupt\n");
                        il->isr_stats.alive++;
                }
        }
#endif
        /* Safely ignore these bits for debug checks below */
        inta &= ~(CSR_INT_BIT_SCD | CSR_INT_BIT_ALIVE);

        /* HW RF KILL switch toggled */
        if (inta & CSR_INT_BIT_RF_KILL) {
                int hw_rf_kill = 0;

                if (!(_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW))
                        hw_rf_kill = 1;

                IL_WARN("RF_KILL bit toggled to %s.\n",
                        hw_rf_kill ? "disable radio" : "enable radio");

                il->isr_stats.rfkill++;

                /* driver only loads ucode once setting the interface up.
                 * the driver allows loading the ucode even if the radio
                 * is killed. Hence update the killswitch state here. The
                 * rfkill handler will care about restarting if needed.
                 */
                if (hw_rf_kill) {
                        set_bit(S_RFKILL, &il->status);
                } else {
                        clear_bit(S_RFKILL, &il->status);
                        il_force_reset(il, true);
                }
                wiphy_rfkill_set_hw_state(il->hw->wiphy, hw_rf_kill);

                handled |= CSR_INT_BIT_RF_KILL;
        }

        /* Chip got too hot and stopped itself */
        if (inta & CSR_INT_BIT_CT_KILL) {
                IL_ERR("Microcode CT kill error detected.\n");
                il->isr_stats.ctkill++;
                handled |= CSR_INT_BIT_CT_KILL;
        }

        /* Error detected by uCode */
        if (inta & CSR_INT_BIT_SW_ERR) {
                IL_ERR("Microcode SW error detected. " " Restarting 0x%X.\n",
                       inta);
                il->isr_stats.sw++;
                il_irq_handle_error(il);
                handled |= CSR_INT_BIT_SW_ERR;
        }

        /*
         * uCode wakes up after power-down sleep.
         * Tell device about any new tx or host commands enqueued,
         * and about any Rx buffers made available while asleep.
         */
        if (inta & CSR_INT_BIT_WAKEUP) {
                D_ISR("Wakeup interrupt\n");
                il_rx_queue_update_write_ptr(il, &il->rxq);
                for (i = 0; i < il->hw_params.max_txq_num; i++)
                        il_txq_update_write_ptr(il, &il->txq[i]);
                il->isr_stats.wakeup++;
                handled |= CSR_INT_BIT_WAKEUP;
        }

        /* All uCode command responses, including Tx command responses,
         * Rx "responses" (frame-received notification), and other
         * notifications from uCode come through here*/
        if (inta & (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX)) {
                il4965_rx_handle(il);
                il->isr_stats.rx++;
                handled |= (CSR_INT_BIT_FH_RX | CSR_INT_BIT_SW_RX);
        }

        /* This "Tx" DMA channel is used only for loading uCode */
        if (inta & CSR_INT_BIT_FH_TX) {
                D_ISR("uCode load interrupt\n");
                il->isr_stats.tx++;
                handled |= CSR_INT_BIT_FH_TX;
                /* Wake up uCode load routine, now that load is complete */
                il->ucode_write_complete = 1;
                wake_up(&il->wait_command_queue);
        }

        if (inta & ~handled) {
                IL_ERR("Unhandled INTA bits 0x%08x\n", inta & ~handled);
                il->isr_stats.unhandled++;
        }

        if (inta & ~(il->inta_mask)) {
                IL_WARN("Disabled INTA bits 0x%08x were pending\n",
                        inta & ~il->inta_mask);
                IL_WARN("   with FH49_INT = 0x%08x\n", inta_fh);
        }

        /* Re-enable all interrupts */
        /* only Re-enable if disabled by irq */
        if (test_bit(S_INT_ENABLED, &il->status))
                il_enable_interrupts(il);
        /* Re-enable RF_KILL if it occurred */
        else if (handled & CSR_INT_BIT_RF_KILL)
                il_enable_rfkill_int(il);

#ifdef CONFIG_IWLEGACY_DEBUG
        if (il_get_debug_level(il) & (IL_DL_ISR)) {
                inta = _il_rd(il, CSR_INT);
                inta_mask = _il_rd(il, CSR_INT_MASK);
                inta_fh = _il_rd(il, CSR_FH_INT_STATUS);
                D_ISR("End inta 0x%08x, enabled 0x%08x, fh 0x%08x, "
                      "flags 0x%08lx\n", inta, inta_mask, inta_fh, flags);
        }
#endif
}

/*****************************************************************************
 *
 * sysfs attributes
 *
 *****************************************************************************/

#ifdef CONFIG_IWLEGACY_DEBUG

/*
 * The following adds a new attribute to the sysfs representation
 * of this device driver (i.e. a new file in /sys/class/net/wlan0/device/)
 * used for controlling the debug level.
 *
 * See the level definitions in iwl for details.
 *
 * The debug_level being managed using sysfs below is a per device debug
 * level that is used instead of the global debug level if it (the per
 * device debug level) is set.
 */
static ssize_t
il4965_show_debug_level(struct device *d, struct device_attribute *attr,
                        char *buf)
{
        struct il_priv *il = dev_get_drvdata(d);
        return sprintf(buf, "0x%08X\n", il_get_debug_level(il));
}

static ssize_t
il4965_store_debug_level(struct device *d, struct device_attribute *attr,
                         const char *buf, size_t count)
{
        struct il_priv *il = dev_get_drvdata(d);
        unsigned long val;
        int ret;

        ret = kstrtoul(buf, 0, &val);
        if (ret)
                IL_ERR("%s is not in hex or decimal form.\n", buf);
        else
                il->debug_level = val;

        return strnlen(buf, count);
}

static DEVICE_ATTR(debug_level, 0644, il4965_show_debug_level,
                   il4965_store_debug_level);

#endif /* CONFIG_IWLEGACY_DEBUG */

static ssize_t
il4965_show_temperature(struct device *d, struct device_attribute *attr,
                        char *buf)
{
        struct il_priv *il = dev_get_drvdata(d);

        if (!il_is_alive(il))
                return -EAGAIN;

        return sprintf(buf, "%d\n", il->temperature);
}

static DEVICE_ATTR(temperature, 0444, il4965_show_temperature, NULL);

static ssize_t
il4965_show_tx_power(struct device *d, struct device_attribute *attr, char *buf)
{
        struct il_priv *il = dev_get_drvdata(d);

        if (!il_is_ready_rf(il))
                return sprintf(buf, "off\n");
        else
                return sprintf(buf, "%d\n", il->tx_power_user_lmt);
}

static ssize_t
il4965_store_tx_power(struct device *d, struct device_attribute *attr,
                      const char *buf, size_t count)
{
        struct il_priv *il = dev_get_drvdata(d);
        unsigned long val;
        int ret;

        ret = kstrtoul(buf, 10, &val);
        if (ret)
                IL_INFO("%s is not in decimal form.\n", buf);
        else {
                mutex_lock(&il->mutex);
                ret = il_set_tx_power(il, val, false);
                mutex_unlock(&il->mutex);
                if (ret)
                        IL_ERR("failed setting tx power (0x%08x).\n", ret);
                else
                        ret = count;
        }
        return ret;
}

static DEVICE_ATTR(tx_power, 0644, il4965_show_tx_power,
                   il4965_store_tx_power);

static struct attribute *il_sysfs_entries[] = {
        &dev_attr_temperature.attr,
        &dev_attr_tx_power.attr,
#ifdef CONFIG_IWLEGACY_DEBUG
        &dev_attr_debug_level.attr,
#endif
        NULL
};

static const struct attribute_group il_attribute_group = {
        .name = NULL,           /* put in device directory */
        .attrs = il_sysfs_entries,
};

/******************************************************************************
 *
 * uCode download functions
 *
 ******************************************************************************/

static void
il4965_dealloc_ucode_pci(struct il_priv *il)
{
        il_free_fw_desc(il->pci_dev, &il->ucode_code);
        il_free_fw_desc(il->pci_dev, &il->ucode_data);
        il_free_fw_desc(il->pci_dev, &il->ucode_data_backup);
        il_free_fw_desc(il->pci_dev, &il->ucode_init);
        il_free_fw_desc(il->pci_dev, &il->ucode_init_data);
        il_free_fw_desc(il->pci_dev, &il->ucode_boot);
}

static void
il4965_nic_start(struct il_priv *il)
{
        /* Remove all resets to allow NIC to operate */
        _il_wr(il, CSR_RESET, 0);
}

static void il4965_ucode_callback(const struct firmware *ucode_raw,
                                  void *context);
static int il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length);

static int __must_check
il4965_request_firmware(struct il_priv *il, bool first)
{
        const char *name_pre = il->cfg->fw_name_pre;
        char tag[8];

        if (first) {
                il->fw_idx = il->cfg->ucode_api_max;
                sprintf(tag, "%d", il->fw_idx);
        } else {
                il->fw_idx--;
                sprintf(tag, "%d", il->fw_idx);
        }

        if (il->fw_idx < il->cfg->ucode_api_min) {
                IL_ERR("no suitable firmware found!\n");
                return -ENOENT;
        }

        sprintf(il->firmware_name, "%s%s%s", name_pre, tag, ".ucode");

        D_INFO("attempting to load firmware '%s'\n", il->firmware_name);

        return request_firmware_nowait(THIS_MODULE, 1, il->firmware_name,
                                       &il->pci_dev->dev, GFP_KERNEL, il,
                                       il4965_ucode_callback);
}

struct il4965_firmware_pieces {
        const void *inst, *data, *init, *init_data, *boot;
        size_t inst_size, data_size, init_size, init_data_size, boot_size;
};

static int
il4965_load_firmware(struct il_priv *il, const struct firmware *ucode_raw,
                     struct il4965_firmware_pieces *pieces)
{
        struct il_ucode_header *ucode = (void *)ucode_raw->data;
        u32 api_ver, hdr_size;
        const u8 *src;

        il->ucode_ver = le32_to_cpu(ucode->ver);
        api_ver = IL_UCODE_API(il->ucode_ver);

        switch (api_ver) {
        default:
        case 0:
        case 1:
        case 2:
                hdr_size = 24;
                if (ucode_raw->size < hdr_size) {
                        IL_ERR("File size too small!\n");
                        return -EINVAL;
                }
                pieces->inst_size = le32_to_cpu(ucode->v1.inst_size);
                pieces->data_size = le32_to_cpu(ucode->v1.data_size);
                pieces->init_size = le32_to_cpu(ucode->v1.init_size);
                pieces->init_data_size = le32_to_cpu(ucode->v1.init_data_size);
                pieces->boot_size = le32_to_cpu(ucode->v1.boot_size);
                src = ucode->v1.data;
                break;
        }

        /* Verify size of file vs. image size info in file's header */
        if (ucode_raw->size !=
            hdr_size + pieces->inst_size + pieces->data_size +
            pieces->init_size + pieces->init_data_size + pieces->boot_size) {

                IL_ERR("uCode file size %d does not match expected size\n",
                       (int)ucode_raw->size);
                return -EINVAL;
        }

        pieces->inst = src;
        src += pieces->inst_size;
        pieces->data = src;
        src += pieces->data_size;
        pieces->init = src;
        src += pieces->init_size;
        pieces->init_data = src;
        src += pieces->init_data_size;
        pieces->boot = src;
        src += pieces->boot_size;

        return 0;
}

/*
 * il4965_ucode_callback - callback when firmware was loaded
 *
 * If loaded successfully, copies the firmware into buffers
 * for the card to fetch (via DMA).
 */
static void
il4965_ucode_callback(const struct firmware *ucode_raw, void *context)
{
        struct il_priv *il = context;
        int err;
        struct il4965_firmware_pieces pieces;
        const unsigned int api_max = il->cfg->ucode_api_max;
        const unsigned int api_min = il->cfg->ucode_api_min;
        u32 api_ver;

        u32 max_probe_length = 200;
        u32 standard_phy_calibration_size =
            IL_DEFAULT_STANDARD_PHY_CALIBRATE_TBL_SIZE;

        memset(&pieces, 0, sizeof(pieces));

        if (!ucode_raw) {
                if (il->fw_idx <= il->cfg->ucode_api_max)
                        IL_ERR("request for firmware file '%s' failed.\n",
                               il->firmware_name);
                goto try_again;
        }

        D_INFO("Loaded firmware file '%s' (%zd bytes).\n", il->firmware_name,
               ucode_raw->size);

        /* Make sure that we got at least the API version number */
        if (ucode_raw->size < 4) {
                IL_ERR("File size way too small!\n");
                goto try_again;
        }

        /* Data from ucode file:  header followed by uCode images */
        err = il4965_load_firmware(il, ucode_raw, &pieces);

        if (err)
                goto try_again;

        api_ver = IL_UCODE_API(il->ucode_ver);

        /*
         * api_ver should match the api version forming part of the
         * firmware filename ... but we don't check for that and only rely
         * on the API version read from firmware header from here on forward
         */
        if (api_ver < api_min || api_ver > api_max) {
                IL_ERR("Driver unable to support your firmware API. "
                       "Driver supports v%u, firmware is v%u.\n", api_max,
                       api_ver);
                goto try_again;
        }

        if (api_ver != api_max)
                IL_ERR("Firmware has old API version. Expected v%u, "
                       "got v%u. New firmware can be obtained "
                       "from http://www.intellinuxwireless.org.\n", api_max,
                       api_ver);

        IL_INFO("loaded firmware version %u.%u.%u.%u\n",
                IL_UCODE_MAJOR(il->ucode_ver), IL_UCODE_MINOR(il->ucode_ver),
                IL_UCODE_API(il->ucode_ver), IL_UCODE_SERIAL(il->ucode_ver));

        snprintf(il->hw->wiphy->fw_version, sizeof(il->hw->wiphy->fw_version),
                 "%u.%u.%u.%u", IL_UCODE_MAJOR(il->ucode_ver),
                 IL_UCODE_MINOR(il->ucode_ver), IL_UCODE_API(il->ucode_ver),
                 IL_UCODE_SERIAL(il->ucode_ver));

        /*
         * For any of the failures below (before allocating pci memory)
         * we will try to load a version with a smaller API -- maybe the
         * user just got a corrupted version of the latest API.
         */

        D_INFO("f/w package hdr ucode version raw = 0x%x\n", il->ucode_ver);
        D_INFO("f/w package hdr runtime inst size = %zd\n", pieces.inst_size);
        D_INFO("f/w package hdr runtime data size = %zd\n", pieces.data_size);
        D_INFO("f/w package hdr init inst size = %zd\n", pieces.init_size);
        D_INFO("f/w package hdr init data size = %zd\n", pieces.init_data_size);
        D_INFO("f/w package hdr boot inst size = %zd\n", pieces.boot_size);

        /* Verify that uCode images will fit in card's SRAM */
        if (pieces.inst_size > il->hw_params.max_inst_size) {
                IL_ERR("uCode instr len %zd too large to fit in\n",
                       pieces.inst_size);
                goto try_again;
        }

        if (pieces.data_size > il->hw_params.max_data_size) {
                IL_ERR("uCode data len %zd too large to fit in\n",
                       pieces.data_size);
                goto try_again;
        }

        if (pieces.init_size > il->hw_params.max_inst_size) {
                IL_ERR("uCode init instr len %zd too large to fit in\n",
                       pieces.init_size);
                goto try_again;
        }

        if (pieces.init_data_size > il->hw_params.max_data_size) {
                IL_ERR("uCode init data len %zd too large to fit in\n",
                       pieces.init_data_size);
                goto try_again;
        }

        if (pieces.boot_size > il->hw_params.max_bsm_size) {
                IL_ERR("uCode boot instr len %zd too large to fit in\n",
                       pieces.boot_size);
                goto try_again;
        }

        /* Allocate ucode buffers for card's bus-master loading ... */

        /* Runtime instructions and 2 copies of data:
         * 1) unmodified from disk
         * 2) backup cache for save/restore during power-downs */
        il->ucode_code.len = pieces.inst_size;
        il_alloc_fw_desc(il->pci_dev, &il->ucode_code);

        il->ucode_data.len = pieces.data_size;
        il_alloc_fw_desc(il->pci_dev, &il->ucode_data);

        il->ucode_data_backup.len = pieces.data_size;
        il_alloc_fw_desc(il->pci_dev, &il->ucode_data_backup);

        if (!il->ucode_code.v_addr || !il->ucode_data.v_addr ||
            !il->ucode_data_backup.v_addr)
                goto err_pci_alloc;

        /* Initialization instructions and data */
        if (pieces.init_size && pieces.init_data_size) {
                il->ucode_init.len = pieces.init_size;
                il_alloc_fw_desc(il->pci_dev, &il->ucode_init);

                il->ucode_init_data.len = pieces.init_data_size;
                il_alloc_fw_desc(il->pci_dev, &il->ucode_init_data);

                if (!il->ucode_init.v_addr || !il->ucode_init_data.v_addr)
                        goto err_pci_alloc;
        }

        /* Bootstrap (instructions only, no data) */
        if (pieces.boot_size) {
                il->ucode_boot.len = pieces.boot_size;
                il_alloc_fw_desc(il->pci_dev, &il->ucode_boot);

                if (!il->ucode_boot.v_addr)
                        goto err_pci_alloc;
        }

        /* Now that we can no longer fail, copy information */

        il->sta_key_max_num = STA_KEY_MAX_NUM;

        /* Copy images into buffers for card's bus-master reads ... */

        /* Runtime instructions (first block of data in file) */
        D_INFO("Copying (but not loading) uCode instr len %zd\n",
               pieces.inst_size);
        memcpy(il->ucode_code.v_addr, pieces.inst, pieces.inst_size);

        D_INFO("uCode instr buf vaddr = 0x%p, paddr = 0x%08x\n",
               il->ucode_code.v_addr, (u32) il->ucode_code.p_addr);

        /*
         * Runtime data
         * NOTE:  Copy into backup buffer will be done in il_up()
         */
        D_INFO("Copying (but not loading) uCode data len %zd\n",
               pieces.data_size);
        memcpy(il->ucode_data.v_addr, pieces.data, pieces.data_size);
        memcpy(il->ucode_data_backup.v_addr, pieces.data, pieces.data_size);

        /* Initialization instructions */
        if (pieces.init_size) {
                D_INFO("Copying (but not loading) init instr len %zd\n",
                       pieces.init_size);
                memcpy(il->ucode_init.v_addr, pieces.init, pieces.init_size);
        }

        /* Initialization data */
        if (pieces.init_data_size) {
                D_INFO("Copying (but not loading) init data len %zd\n",
                       pieces.init_data_size);
                memcpy(il->ucode_init_data.v_addr, pieces.init_data,
                       pieces.init_data_size);
        }

        /* Bootstrap instructions */
        D_INFO("Copying (but not loading) boot instr len %zd\n",
               pieces.boot_size);
        memcpy(il->ucode_boot.v_addr, pieces.boot, pieces.boot_size);

        /*
         * figure out the offset of chain noise reset and gain commands
         * base on the size of standard phy calibration commands table size
         */
        il->_4965.phy_calib_chain_noise_reset_cmd =
            standard_phy_calibration_size;
        il->_4965.phy_calib_chain_noise_gain_cmd =
            standard_phy_calibration_size + 1;

        /**************************************************
         * This is still part of probe() in a sense...
         *
         * 9. Setup and register with mac80211 and debugfs
         **************************************************/
        err = il4965_mac_setup_register(il, max_probe_length);
        if (err)
                goto out_unbind;

        il_dbgfs_register(il, DRV_NAME);

        err = sysfs_create_group(&il->pci_dev->dev.kobj, &il_attribute_group);
        if (err) {
                IL_ERR("failed to create sysfs device attributes\n");
                goto out_unbind;
        }

        /* We have our copies now, allow OS release its copies */
        release_firmware(ucode_raw);
        complete(&il->_4965.firmware_loading_complete);
        return;

try_again:
        /* try next, if any */
        if (il4965_request_firmware(il, false))
                goto out_unbind;
        release_firmware(ucode_raw);
        return;

err_pci_alloc:
        IL_ERR("failed to allocate pci memory\n");
        il4965_dealloc_ucode_pci(il);
out_unbind:
        complete(&il->_4965.firmware_loading_complete);
        device_release_driver(&il->pci_dev->dev);
        release_firmware(ucode_raw);
}

static const char *const desc_lookup_text[] = {
        "OK",
        "FAIL",
        "BAD_PARAM",
        "BAD_CHECKSUM",
        "NMI_INTERRUPT_WDG",
        "SYSASSERT",
        "FATAL_ERROR",
        "BAD_COMMAND",
        "HW_ERROR_TUNE_LOCK",
        "HW_ERROR_TEMPERATURE",
        "ILLEGAL_CHAN_FREQ",
        "VCC_NOT_STBL",
        "FH49_ERROR",
        "NMI_INTERRUPT_HOST",
        "NMI_INTERRUPT_ACTION_PT",
        "NMI_INTERRUPT_UNKNOWN",
        "UCODE_VERSION_MISMATCH",
        "HW_ERROR_ABS_LOCK",
        "HW_ERROR_CAL_LOCK_FAIL",
        "NMI_INTERRUPT_INST_ACTION_PT",
        "NMI_INTERRUPT_DATA_ACTION_PT",
        "NMI_TRM_HW_ER",
        "NMI_INTERRUPT_TRM",
        "NMI_INTERRUPT_BREAK_POINT",
        "DEBUG_0",
        "DEBUG_1",
        "DEBUG_2",
        "DEBUG_3",
};

static struct {
        char *name;
        u8 num;
} advanced_lookup[] = {
        {
        "NMI_INTERRUPT_WDG", 0x34}, {
        "SYSASSERT", 0x35}, {
        "UCODE_VERSION_MISMATCH", 0x37}, {
        "BAD_COMMAND", 0x38}, {
        "NMI_INTERRUPT_DATA_ACTION_PT", 0x3C}, {
        "FATAL_ERROR", 0x3D}, {
        "NMI_TRM_HW_ERR", 0x46}, {
        "NMI_INTERRUPT_TRM", 0x4C}, {
        "NMI_INTERRUPT_BREAK_POINT", 0x54}, {
        "NMI_INTERRUPT_WDG_RXF_FULL", 0x5C}, {
        "NMI_INTERRUPT_WDG_NO_RBD_RXF_FULL", 0x64}, {
        "NMI_INTERRUPT_HOST", 0x66}, {
        "NMI_INTERRUPT_ACTION_PT", 0x7C}, {
        "NMI_INTERRUPT_UNKNOWN", 0x84}, {
        "NMI_INTERRUPT_INST_ACTION_PT", 0x86}, {
"ADVANCED_SYSASSERT", 0},};

static const char *
il4965_desc_lookup(u32 num)
{
        int i;
        int max = ARRAY_SIZE(desc_lookup_text);

        if (num < max)
                return desc_lookup_text[num];

        max = ARRAY_SIZE(advanced_lookup) - 1;
        for (i = 0; i < max; i++) {
                if (advanced_lookup[i].num == num)
                        break;
        }
        return advanced_lookup[i].name;
}

#define ERROR_START_OFFSET  (1 * sizeof(u32))
#define ERROR_ELEM_SIZE     (7 * sizeof(u32))

void
il4965_dump_nic_error_log(struct il_priv *il)
{
        u32 data2, line;
        u32 desc, time, count, base, data1;
        u32 blink1, blink2, ilink1, ilink2;
        u32 pc, hcmd;

        if (il->ucode_type == UCODE_INIT)
                base = le32_to_cpu(il->card_alive_init.error_event_table_ptr);
        else
                base = le32_to_cpu(il->card_alive.error_event_table_ptr);

        if (!il->ops->is_valid_rtc_data_addr(base)) {
                IL_ERR("Not valid error log pointer 0x%08X for %s uCode\n",
                       base, (il->ucode_type == UCODE_INIT) ? "Init" : "RT");
                return;
        }

        count = il_read_targ_mem(il, base);

        if (ERROR_START_OFFSET <= count * ERROR_ELEM_SIZE) {
                IL_ERR("Start IWL Error Log Dump:\n");
                IL_ERR("Status: 0x%08lX, count: %d\n", il->status, count);
        }

        desc = il_read_targ_mem(il, base + 1 * sizeof(u32));
        il->isr_stats.err_code = desc;
        pc = il_read_targ_mem(il, base + 2 * sizeof(u32));
        blink1 = il_read_targ_mem(il, base + 3 * sizeof(u32));
        blink2 = il_read_targ_mem(il, base + 4 * sizeof(u32));
        ilink1 = il_read_targ_mem(il, base + 5 * sizeof(u32));
        ilink2 = il_read_targ_mem(il, base + 6 * sizeof(u32));
        data1 = il_read_targ_mem(il, base + 7 * sizeof(u32));
        data2 = il_read_targ_mem(il, base + 8 * sizeof(u32));
        line = il_read_targ_mem(il, base + 9 * sizeof(u32));
        time = il_read_targ_mem(il, base + 11 * sizeof(u32));
        hcmd = il_read_targ_mem(il, base + 22 * sizeof(u32));

        IL_ERR("Desc                                  Time       "
               "data1      data2      line\n");
        IL_ERR("%-28s (0x%04X) %010u 0x%08X 0x%08X %u\n",
               il4965_desc_lookup(desc), desc, time, data1, data2, line);
        IL_ERR("pc      blink1  blink2  ilink1  ilink2  hcmd\n");
        IL_ERR("0x%05X 0x%05X 0x%05X 0x%05X 0x%05X 0x%05X\n", pc, blink1,
               blink2, ilink1, ilink2, hcmd);
}

static void
il4965_rf_kill_ct_config(struct il_priv *il)
{
        struct il_ct_kill_config cmd;
        unsigned long flags;
        int ret = 0;

        spin_lock_irqsave(&il->lock, flags);
        _il_wr(il, CSR_UCODE_DRV_GP1_CLR,
               CSR_UCODE_DRV_GP1_REG_BIT_CT_KILL_EXIT);
        spin_unlock_irqrestore(&il->lock, flags);

        cmd.critical_temperature_R =
            cpu_to_le32(il->hw_params.ct_kill_threshold);

        ret = il_send_cmd_pdu(il, C_CT_KILL_CONFIG, sizeof(cmd), &cmd);
        if (ret)
                IL_ERR("C_CT_KILL_CONFIG failed\n");
        else
                D_INFO("C_CT_KILL_CONFIG " "succeeded, "
                       "critical temperature is %d\n",
                       il->hw_params.ct_kill_threshold);
}

static const s8 default_queue_to_tx_fifo[] = {
        IL_TX_FIFO_VO,
        IL_TX_FIFO_VI,
        IL_TX_FIFO_BE,
        IL_TX_FIFO_BK,
        IL49_CMD_FIFO_NUM,
        IL_TX_FIFO_UNUSED,
        IL_TX_FIFO_UNUSED,
};

#define IL_MASK(lo, hi) ((1 << (hi)) | ((1 << (hi)) - (1 << (lo))))

static int
il4965_alive_notify(struct il_priv *il)
{
        u32 a;
        unsigned long flags;
        int i, chan;
        u32 reg_val;

        spin_lock_irqsave(&il->lock, flags);

        /* Clear 4965's internal Tx Scheduler data base */
        il->scd_base_addr = il_rd_prph(il, IL49_SCD_SRAM_BASE_ADDR);
        a = il->scd_base_addr + IL49_SCD_CONTEXT_DATA_OFFSET;
        for (; a < il->scd_base_addr + IL49_SCD_TX_STTS_BITMAP_OFFSET; a += 4)
                il_write_targ_mem(il, a, 0);
        for (; a < il->scd_base_addr + IL49_SCD_TRANSLATE_TBL_OFFSET; a += 4)
                il_write_targ_mem(il, a, 0);
        for (;
             a <
             il->scd_base_addr +
             IL49_SCD_TRANSLATE_TBL_OFFSET_QUEUE(il->hw_params.max_txq_num);
             a += 4)
                il_write_targ_mem(il, a, 0);

        /* Tel 4965 where to find Tx byte count tables */
        il_wr_prph(il, IL49_SCD_DRAM_BASE_ADDR, il->scd_bc_tbls.dma >> 10);

        /* Enable DMA channel */
        for (chan = 0; chan < FH49_TCSR_CHNL_NUM; chan++)
                il_wr(il, FH49_TCSR_CHNL_TX_CONFIG_REG(chan),
                      FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CHNL_ENABLE |
                      FH49_TCSR_TX_CONFIG_REG_VAL_DMA_CREDIT_ENABLE);

        /* Update FH chicken bits */
        reg_val = il_rd(il, FH49_TX_CHICKEN_BITS_REG);
        il_wr(il, FH49_TX_CHICKEN_BITS_REG,
              reg_val | FH49_TX_CHICKEN_BITS_SCD_AUTO_RETRY_EN);

        /* Disable chain mode for all queues */
        il_wr_prph(il, IL49_SCD_QUEUECHAIN_SEL, 0);

        /* Initialize each Tx queue (including the command queue) */
        for (i = 0; i < il->hw_params.max_txq_num; i++) {

                /* TFD circular buffer read/write idxes */
                il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(i), 0);
                il_wr(il, HBUS_TARG_WRPTR, 0 | (i << 8));

                /* Max Tx Window size for Scheduler-ACK mode */
                il_write_targ_mem(il,
                                  il->scd_base_addr +
                                  IL49_SCD_CONTEXT_QUEUE_OFFSET(i),
                                  (SCD_WIN_SIZE <<
                                   IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_POS) &
                                  IL49_SCD_QUEUE_CTX_REG1_WIN_SIZE_MSK);

                /* Frame limit */
                il_write_targ_mem(il,
                                  il->scd_base_addr +
                                  IL49_SCD_CONTEXT_QUEUE_OFFSET(i) +
                                  sizeof(u32),
                                  (SCD_FRAME_LIMIT <<
                                   IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_POS) &
                                  IL49_SCD_QUEUE_CTX_REG2_FRAME_LIMIT_MSK);

        }
        il_wr_prph(il, IL49_SCD_INTERRUPT_MASK,
                   (1 << il->hw_params.max_txq_num) - 1);

        /* Activate all Tx DMA/FIFO channels */
        il4965_txq_set_sched(il, IL_MASK(0, 6));

        il4965_set_wr_ptrs(il, IL_DEFAULT_CMD_QUEUE_NUM, 0);

        /* make sure all queue are not stopped */
        memset(&il->queue_stopped[0], 0, sizeof(il->queue_stopped));
        for (i = 0; i < 4; i++)
                atomic_set(&il->queue_stop_count[i], 0);

        /* reset to 0 to enable all the queue first */
        il->txq_ctx_active_msk = 0;
        /* Map each Tx/cmd queue to its corresponding fifo */
        BUILD_BUG_ON(ARRAY_SIZE(default_queue_to_tx_fifo) != 7);

        for (i = 0; i < ARRAY_SIZE(default_queue_to_tx_fifo); i++) {
                int ac = default_queue_to_tx_fifo[i];

                il_txq_ctx_activate(il, i);

                if (ac == IL_TX_FIFO_UNUSED)
                        continue;

                il4965_tx_queue_set_status(il, &il->txq[i], ac, 0);
        }

        spin_unlock_irqrestore(&il->lock, flags);

        return 0;
}

/*
 * il4965_alive_start - called after N_ALIVE notification received
 *                   from protocol/runtime uCode (initialization uCode's
 *                   Alive gets handled by il_init_alive_start()).
 */
static void
il4965_alive_start(struct il_priv *il)
{
        int ret = 0;

        D_INFO("Runtime Alive received.\n");

        if (il->card_alive.is_valid != UCODE_VALID_OK) {
                /* We had an error bringing up the hardware, so take it
                 * all the way back down so we can try again */
                D_INFO("Alive failed.\n");
                goto restart;
        }

        /* Initialize uCode has loaded Runtime uCode ... verify inst image.
         * This is a paranoid check, because we would not have gotten the
         * "runtime" alive if code weren't properly loaded.  */
        if (il4965_verify_ucode(il)) {
                /* Runtime instruction load was bad;
                 * take it all the way back down so we can try again */
                D_INFO("Bad runtime uCode load.\n");
                goto restart;
        }

        ret = il4965_alive_notify(il);
        if (ret) {
                IL_WARN("Could not complete ALIVE transition [ntf]: %d\n", ret);
                goto restart;
        }

        /* After the ALIVE response, we can send host commands to the uCode */
        set_bit(S_ALIVE, &il->status);

        /* Enable watchdog to monitor the driver tx queues */
        il_setup_watchdog(il);

        if (il_is_rfkill(il))
                return;

        ieee80211_wake_queues(il->hw);

        il->active_rate = RATES_MASK;

        il_power_update_mode(il, true);
        D_INFO("Updated power mode\n");

        if (il_is_associated(il)) {
                struct il_rxon_cmd *active_rxon =
                    (struct il_rxon_cmd *)&il->active;
                /* apply any changes in staging */
                il->staging.filter_flags |= RXON_FILTER_ASSOC_MSK;
                active_rxon->filter_flags &= ~RXON_FILTER_ASSOC_MSK;
        } else {
                /* Initialize our rx_config data */
                il_connection_init_rx_config(il);

                if (il->ops->set_rxon_chain)
                        il->ops->set_rxon_chain(il);
        }

        /* Configure bluetooth coexistence if enabled */
        il_send_bt_config(il);

        il4965_reset_run_time_calib(il);

        set_bit(S_READY, &il->status);

        /* Configure the adapter for unassociated operation */
        il_commit_rxon(il);

        /* At this point, the NIC is initialized and operational */
        il4965_rf_kill_ct_config(il);

        D_INFO("ALIVE processing complete.\n");
        wake_up(&il->wait_command_queue);

        return;

restart:
        queue_work(il->workqueue, &il->restart);
}

static void il4965_cancel_deferred_work(struct il_priv *il);

static void
__il4965_down(struct il_priv *il)
{
        unsigned long flags;
        int exit_pending;

        D_INFO(DRV_NAME " is going down\n");

        il_scan_cancel_timeout(il, 200);

        exit_pending = test_and_set_bit(S_EXIT_PENDING, &il->status);

        /* Stop TX queues watchdog. We need to have S_EXIT_PENDING bit set
         * to prevent rearm timer */
        timer_delete_sync(&il->watchdog);

        il_clear_ucode_stations(il);

        /* FIXME: race conditions ? */
        spin_lock_irq(&il->sta_lock);
        /*
         * Remove all key information that is not stored as part
         * of station information since mac80211 may not have had
         * a chance to remove all the keys. When device is
         * reconfigured by mac80211 after an error all keys will
         * be reconfigured.
         */
        memset(il->_4965.wep_keys, 0, sizeof(il->_4965.wep_keys));
        il->_4965.key_mapping_keys = 0;
        spin_unlock_irq(&il->sta_lock);

        il_dealloc_bcast_stations(il);
        il_clear_driver_stations(il);

        /* Unblock any waiting calls */
        wake_up_all(&il->wait_command_queue);

        /* Wipe out the EXIT_PENDING status bit if we are not actually
         * exiting the module */
        if (!exit_pending)
                clear_bit(S_EXIT_PENDING, &il->status);

        /* stop and reset the on-board processor */
        _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);

        /* tell the device to stop sending interrupts */
        spin_lock_irqsave(&il->lock, flags);
        il_disable_interrupts(il);
        spin_unlock_irqrestore(&il->lock, flags);
        il4965_synchronize_irq(il);

        if (il->mac80211_registered)
                ieee80211_stop_queues(il->hw);

        /* If we have not previously called il_init() then
         * clear all bits but the RF Kill bit and return */
        if (!il_is_init(il)) {
                il->status =
                    test_bit(S_RFKILL, &il->status) << S_RFKILL |
                    test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
                    test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;
                goto exit;
        }

        /* ...otherwise clear out all the status bits but the RF Kill
         * bit and continue taking the NIC down. */
        il->status &=
            test_bit(S_RFKILL, &il->status) << S_RFKILL |
            test_bit(S_GEO_CONFIGURED, &il->status) << S_GEO_CONFIGURED |
            test_bit(S_FW_ERROR, &il->status) << S_FW_ERROR |
            test_bit(S_EXIT_PENDING, &il->status) << S_EXIT_PENDING;

        /*
         * We disabled and synchronized interrupt, and priv->mutex is taken, so
         * here is the only thread which will program device registers, but
         * still have lockdep assertions, so we are taking reg_lock.
         */
        spin_lock_irq(&il->reg_lock);
        /* FIXME: il_grab_nic_access if rfkill is off ? */

        il4965_txq_ctx_stop(il);
        il4965_rxq_stop(il);
        /* Power-down device's busmaster DMA clocks */
        _il_wr_prph(il, APMG_CLK_DIS_REG, APMG_CLK_VAL_DMA_CLK_RQT);
        udelay(5);
        /* Make sure (redundant) we've released our request to stay awake */
        _il_clear_bit(il, CSR_GP_CNTRL, CSR_GP_CNTRL_REG_FLAG_MAC_ACCESS_REQ);
        /* Stop the device, and put it in low power state */
        _il_apm_stop(il);

        spin_unlock_irq(&il->reg_lock);

        il4965_txq_ctx_unmap(il);
exit:
        memset(&il->card_alive, 0, sizeof(struct il_alive_resp));

        dev_kfree_skb(il->beacon_skb);
        il->beacon_skb = NULL;

        /* clear out any free frames */
        il4965_clear_free_frames(il);
}

static void
il4965_down(struct il_priv *il)
{
        mutex_lock(&il->mutex);
        __il4965_down(il);
        mutex_unlock(&il->mutex);

        il4965_cancel_deferred_work(il);
}


static void
il4965_set_hw_ready(struct il_priv *il)
{
        int ret;

        il_set_bit(il, CSR_HW_IF_CONFIG_REG,
                   CSR_HW_IF_CONFIG_REG_BIT_NIC_READY);

        /* See if we got it */
        ret = _il_poll_bit(il, CSR_HW_IF_CONFIG_REG,
                           CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
                           CSR_HW_IF_CONFIG_REG_BIT_NIC_READY,
                           100);
        if (ret >= 0)
                il->hw_ready = true;

        D_INFO("hardware %s ready\n", (il->hw_ready) ? "" : "not");
}

static void
il4965_prepare_card_hw(struct il_priv *il)
{
        int ret;

        il->hw_ready = false;

        il4965_set_hw_ready(il);
        if (il->hw_ready)
                return;

        /* If HW is not ready, prepare the conditions to check again */
        il_set_bit(il, CSR_HW_IF_CONFIG_REG, CSR_HW_IF_CONFIG_REG_PREPARE);

        ret =
            _il_poll_bit(il, CSR_HW_IF_CONFIG_REG,
                         ~CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE,
                         CSR_HW_IF_CONFIG_REG_BIT_NIC_PREPARE_DONE, 150000);

        /* HW should be ready by now, check again. */
        if (ret != -ETIMEDOUT)
                il4965_set_hw_ready(il);
}

#define MAX_HW_RESTARTS 5

static int
__il4965_up(struct il_priv *il)
{
        int i;
        int ret;

        if (test_bit(S_EXIT_PENDING, &il->status)) {
                IL_WARN("Exit pending; will not bring the NIC up\n");
                return -EIO;
        }

        if (!il->ucode_data_backup.v_addr || !il->ucode_data.v_addr) {
                IL_ERR("ucode not available for device bringup\n");
                return -EIO;
        }

        ret = il4965_alloc_bcast_station(il);
        if (ret) {
                il_dealloc_bcast_stations(il);
                return ret;
        }

        il4965_prepare_card_hw(il);
        if (!il->hw_ready) {
                il_dealloc_bcast_stations(il);
                IL_ERR("HW not ready\n");
                return -EIO;
        }

        /* If platform's RF_KILL switch is NOT set to KILL */
        if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
                clear_bit(S_RFKILL, &il->status);
        else {
                set_bit(S_RFKILL, &il->status);
                wiphy_rfkill_set_hw_state(il->hw->wiphy, true);

                il_dealloc_bcast_stations(il);
                il_enable_rfkill_int(il);
                IL_WARN("Radio disabled by HW RF Kill switch\n");
                return 0;
        }

        _il_wr(il, CSR_INT, 0xFFFFFFFF);

        /* must be initialised before il_hw_nic_init */
        il->cmd_queue = IL_DEFAULT_CMD_QUEUE_NUM;

        ret = il4965_hw_nic_init(il);
        if (ret) {
                IL_ERR("Unable to init nic\n");
                il_dealloc_bcast_stations(il);
                return ret;
        }

        /* make sure rfkill handshake bits are cleared */
        _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
        _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_DRV_GP1_BIT_CMD_BLOCKED);

        /* clear (again), then enable host interrupts */
        _il_wr(il, CSR_INT, 0xFFFFFFFF);
        il_enable_interrupts(il);

        /* really make sure rfkill handshake bits are cleared */
        _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);
        _il_wr(il, CSR_UCODE_DRV_GP1_CLR, CSR_UCODE_SW_BIT_RFKILL);

        /* Copy original ucode data image from disk into backup cache.
         * This will be used to initialize the on-board processor's
         * data SRAM for a clean start when the runtime program first loads. */
        memcpy(il->ucode_data_backup.v_addr, il->ucode_data.v_addr,
               il->ucode_data.len);

        for (i = 0; i < MAX_HW_RESTARTS; i++) {

                /* load bootstrap state machine,
                 * load bootstrap program into processor's memory,
                 * prepare to load the "initialize" uCode */
                ret = il->ops->load_ucode(il);

                if (ret) {
                        IL_ERR("Unable to set up bootstrap uCode: %d\n", ret);
                        continue;
                }

                /* start card; "initialize" will load runtime ucode */
                il4965_nic_start(il);

                D_INFO(DRV_NAME " is coming up\n");

                return 0;
        }

        set_bit(S_EXIT_PENDING, &il->status);
        __il4965_down(il);
        clear_bit(S_EXIT_PENDING, &il->status);

        /* tried to restart and config the device for as long as our
         * patience could withstand */
        IL_ERR("Unable to initialize device after %d attempts.\n", i);
        return -EIO;
}

/*****************************************************************************
 *
 * Workqueue callbacks
 *
 *****************************************************************************/

static void
il4965_bg_init_alive_start(struct work_struct *data)
{
        struct il_priv *il =
            container_of(data, struct il_priv, init_alive_start.work);

        mutex_lock(&il->mutex);
        if (test_bit(S_EXIT_PENDING, &il->status))
                goto out;

        il->ops->init_alive_start(il);
out:
        mutex_unlock(&il->mutex);
}

static void
il4965_bg_alive_start(struct work_struct *data)
{
        struct il_priv *il =
            container_of(data, struct il_priv, alive_start.work);

        mutex_lock(&il->mutex);
        if (test_bit(S_EXIT_PENDING, &il->status))
                goto out;

        il4965_alive_start(il);
out:
        mutex_unlock(&il->mutex);
}

static void
il4965_bg_run_time_calib_work(struct work_struct *work)
{
        struct il_priv *il = container_of(work, struct il_priv,
                                          run_time_calib_work);

        mutex_lock(&il->mutex);

        if (test_bit(S_EXIT_PENDING, &il->status) ||
            test_bit(S_SCANNING, &il->status)) {
                mutex_unlock(&il->mutex);
                return;
        }

        if (il->start_calib) {
                il4965_chain_noise_calibration(il, (void *)&il->_4965.stats);
                il4965_sensitivity_calibration(il, (void *)&il->_4965.stats);
        }

        mutex_unlock(&il->mutex);
}

static void
il4965_bg_restart(struct work_struct *data)
{
        struct il_priv *il = container_of(data, struct il_priv, restart);

        if (test_bit(S_EXIT_PENDING, &il->status))
                return;

        if (test_and_clear_bit(S_FW_ERROR, &il->status)) {
                mutex_lock(&il->mutex);
                il->is_open = 0;

                __il4965_down(il);

                mutex_unlock(&il->mutex);
                il4965_cancel_deferred_work(il);
                ieee80211_restart_hw(il->hw);
        } else {
                il4965_down(il);

                mutex_lock(&il->mutex);
                if (test_bit(S_EXIT_PENDING, &il->status)) {
                        mutex_unlock(&il->mutex);
                        return;
                }

                __il4965_up(il);
                mutex_unlock(&il->mutex);
        }
}

static void
il4965_bg_rx_replenish(struct work_struct *data)
{
        struct il_priv *il = container_of(data, struct il_priv, rx_replenish);

        if (test_bit(S_EXIT_PENDING, &il->status))
                return;

        mutex_lock(&il->mutex);
        il4965_rx_replenish(il);
        mutex_unlock(&il->mutex);
}

/*****************************************************************************
 *
 * mac80211 entry point functions
 *
 *****************************************************************************/

#define UCODE_READY_TIMEOUT     (4 * HZ)

/*
 * Not a mac80211 entry point function, but it fits in with all the
 * other mac80211 functions grouped here.
 */
static int
il4965_mac_setup_register(struct il_priv *il, u32 max_probe_length)
{
        int ret;
        struct ieee80211_hw *hw = il->hw;

        hw->rate_control_algorithm = "iwl-4965-rs";

        /* Tell mac80211 our characteristics */
        ieee80211_hw_set(hw, SUPPORTS_DYNAMIC_PS);
        ieee80211_hw_set(hw, SUPPORTS_PS);
        ieee80211_hw_set(hw, REPORTS_TX_ACK_STATUS);
        ieee80211_hw_set(hw, SPECTRUM_MGMT);
        ieee80211_hw_set(hw, NEED_DTIM_BEFORE_ASSOC);
        ieee80211_hw_set(hw, SIGNAL_DBM);
        ieee80211_hw_set(hw, AMPDU_AGGREGATION);
        if (il->cfg->sku & IL_SKU_N)
                hw->wiphy->features |= NL80211_FEATURE_DYNAMIC_SMPS |
                                       NL80211_FEATURE_STATIC_SMPS;

        hw->sta_data_size = sizeof(struct il_station_priv);
        hw->vif_data_size = sizeof(struct il_vif_priv);

        hw->wiphy->interface_modes =
            BIT(NL80211_IFTYPE_STATION) | BIT(NL80211_IFTYPE_ADHOC);

        hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
        hw->wiphy->regulatory_flags |= REGULATORY_CUSTOM_REG |
                                       REGULATORY_DISABLE_BEACON_HINTS;

        /*
         * For now, disable PS by default because it affects
         * RX performance significantly.
         */
        hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;

        hw->wiphy->max_scan_ssids = PROBE_OPTION_MAX;
        /* we create the 802.11 header and a zero-length SSID element */
        hw->wiphy->max_scan_ie_len = max_probe_length - 24 - 2;

        /* Default value; 4 EDCA QOS priorities */
        hw->queues = 4;

        hw->max_listen_interval = IL_CONN_MAX_LISTEN_INTERVAL;

        if (il->bands[NL80211_BAND_2GHZ].n_channels)
                il->hw->wiphy->bands[NL80211_BAND_2GHZ] =
                    &il->bands[NL80211_BAND_2GHZ];
        if (il->bands[NL80211_BAND_5GHZ].n_channels)
                il->hw->wiphy->bands[NL80211_BAND_5GHZ] =
                    &il->bands[NL80211_BAND_5GHZ];

        il_leds_init(il);

        wiphy_ext_feature_set(il->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);

        ret = ieee80211_register_hw(il->hw);
        if (ret) {
                IL_ERR("Failed to register hw (error %d)\n", ret);
                return ret;
        }
        il->mac80211_registered = 1;

        return 0;
}

int
il4965_mac_start(struct ieee80211_hw *hw)
{
        struct il_priv *il = hw->priv;
        int ret;

        D_MAC80211("enter\n");

        /* we should be verifying the device is ready to be opened */
        mutex_lock(&il->mutex);
        ret = __il4965_up(il);
        mutex_unlock(&il->mutex);

        if (ret)
                return ret;

        if (il_is_rfkill(il))
                goto out;

        D_INFO("Start UP work done.\n");

        /* Wait for START_ALIVE from Run Time ucode. Otherwise callbacks from
         * mac80211 will not be run successfully. */
        ret = wait_event_timeout(il->wait_command_queue,
                                 test_bit(S_READY, &il->status),
                                 UCODE_READY_TIMEOUT);
        if (!ret) {
                if (!test_bit(S_READY, &il->status)) {
                        IL_ERR("START_ALIVE timeout after %dms.\n",
                                jiffies_to_msecs(UCODE_READY_TIMEOUT));
                        return -ETIMEDOUT;
                }
        }

        il4965_led_enable(il);

out:
        il->is_open = 1;
        D_MAC80211("leave\n");
        return 0;
}

void
il4965_mac_stop(struct ieee80211_hw *hw, bool suspend)
{
        struct il_priv *il = hw->priv;

        D_MAC80211("enter\n");

        if (!il->is_open)
                return;

        il->is_open = 0;

        il4965_down(il);

        flush_workqueue(il->workqueue);

        /* User space software may expect getting rfkill changes
         * even if interface is down */
        _il_wr(il, CSR_INT, 0xFFFFFFFF);
        il_enable_rfkill_int(il);

        D_MAC80211("leave\n");
}

void
il4965_mac_tx(struct ieee80211_hw *hw,
              struct ieee80211_tx_control *control,
              struct sk_buff *skb)
{
        struct il_priv *il = hw->priv;

        D_MACDUMP("enter\n");

        D_TX("dev->xmit(%d bytes) at rate 0x%02x\n", skb->len,
             ieee80211_get_tx_rate(hw, IEEE80211_SKB_CB(skb))->bitrate);

        if (il4965_tx_skb(il, control->sta, skb))
                dev_kfree_skb_any(skb);

        D_MACDUMP("leave\n");
}

void
il4965_mac_update_tkip_key(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
                           struct ieee80211_key_conf *keyconf,
                           struct ieee80211_sta *sta, u32 iv32, u16 * phase1key)
{
        struct il_priv *il = hw->priv;

        D_MAC80211("enter\n");

        il4965_update_tkip_key(il, keyconf, sta, iv32, phase1key);

        D_MAC80211("leave\n");
}

int
il4965_mac_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
                   struct ieee80211_vif *vif, struct ieee80211_sta *sta,
                   struct ieee80211_key_conf *key)
{
        struct il_priv *il = hw->priv;
        int ret;
        u8 sta_id;
        bool is_default_wep_key = false;

        D_MAC80211("enter\n");

        if (il->cfg->mod_params->sw_crypto) {
                D_MAC80211("leave - hwcrypto disabled\n");
                return -EOPNOTSUPP;
        }

        /*
         * To support IBSS RSN, don't program group keys in IBSS, the
         * hardware will then not attempt to decrypt the frames.
         */
        if (vif->type == NL80211_IFTYPE_ADHOC &&
            !(key->flags & IEEE80211_KEY_FLAG_PAIRWISE)) {
                D_MAC80211("leave - ad-hoc group key\n");
                return -EOPNOTSUPP;
        }

        sta_id = il_sta_id_or_broadcast(il, sta);
        if (sta_id == IL_INVALID_STATION)
                return -EINVAL;

        mutex_lock(&il->mutex);
        il_scan_cancel_timeout(il, 100);

        /*
         * If we are getting WEP group key and we didn't receive any key mapping
         * so far, we are in legacy wep mode (group key only), otherwise we are
         * in 1X mode.
         * In legacy wep mode, we use another host command to the uCode.
         */
        if ((key->cipher == WLAN_CIPHER_SUITE_WEP40 ||
             key->cipher == WLAN_CIPHER_SUITE_WEP104) && !sta) {
                if (cmd == SET_KEY)
                        is_default_wep_key = !il->_4965.key_mapping_keys;
                else
                        is_default_wep_key =
                            (key->hw_key_idx == HW_KEY_DEFAULT);
        }

        switch (cmd) {
        case SET_KEY:
                if (is_default_wep_key)
                        ret = il4965_set_default_wep_key(il, key);
                else
                        ret = il4965_set_dynamic_key(il, key, sta_id);

                D_MAC80211("enable hwcrypto key\n");
                break;
        case DISABLE_KEY:
                if (is_default_wep_key)
                        ret = il4965_remove_default_wep_key(il, key);
                else
                        ret = il4965_remove_dynamic_key(il, key, sta_id);

                D_MAC80211("disable hwcrypto key\n");
                break;
        default:
                ret = -EINVAL;
        }

        mutex_unlock(&il->mutex);
        D_MAC80211("leave\n");

        return ret;
}

int
il4965_mac_ampdu_action(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
                        struct ieee80211_ampdu_params *params)
{
        struct il_priv *il = hw->priv;
        int ret = -EINVAL;
        struct ieee80211_sta *sta = params->sta;
        enum ieee80211_ampdu_mlme_action action = params->action;
        u16 tid = params->tid;
        u16 *ssn = &params->ssn;

        D_HT("A-MPDU action on addr %pM tid %d\n", sta->addr, tid);

        if (!(il->cfg->sku & IL_SKU_N))
                return -EACCES;

        mutex_lock(&il->mutex);

        switch (action) {
        case IEEE80211_AMPDU_RX_START:
                D_HT("start Rx\n");
                ret = il4965_sta_rx_agg_start(il, sta, tid, *ssn);
                break;
        case IEEE80211_AMPDU_RX_STOP:
                D_HT("stop Rx\n");
                ret = il4965_sta_rx_agg_stop(il, sta, tid);
                if (test_bit(S_EXIT_PENDING, &il->status))
                        ret = 0;
                break;
        case IEEE80211_AMPDU_TX_START:
                D_HT("start Tx\n");
                ret = il4965_tx_agg_start(il, vif, sta, tid, ssn);
                break;
        case IEEE80211_AMPDU_TX_STOP_CONT:
        case IEEE80211_AMPDU_TX_STOP_FLUSH:
        case IEEE80211_AMPDU_TX_STOP_FLUSH_CONT:
                D_HT("stop Tx\n");
                ret = il4965_tx_agg_stop(il, vif, sta, tid);
                if (test_bit(S_EXIT_PENDING, &il->status))
                        ret = 0;
                break;
        case IEEE80211_AMPDU_TX_OPERATIONAL:
                ret = 0;
                break;
        }
        mutex_unlock(&il->mutex);

        return ret;
}

int
il4965_mac_sta_add(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
                   struct ieee80211_sta *sta)
{
        struct il_priv *il = hw->priv;
        struct il_station_priv *sta_priv = (void *)sta->drv_priv;
        bool is_ap = vif->type == NL80211_IFTYPE_STATION;
        int ret;
        u8 sta_id;

        D_INFO("received request to add station %pM\n", sta->addr);
        mutex_lock(&il->mutex);
        D_INFO("proceeding to add station %pM\n", sta->addr);
        sta_priv->common.sta_id = IL_INVALID_STATION;

        atomic_set(&sta_priv->pending_frames, 0);

        ret =
            il_add_station_common(il, sta->addr, is_ap, sta, &sta_id);
        if (ret) {
                IL_ERR("Unable to add station %pM (%d)\n", sta->addr, ret);
                /* Should we return success if return code is EEXIST ? */
                mutex_unlock(&il->mutex);
                return ret;
        }

        sta_priv->common.sta_id = sta_id;

        /* Initialize rate scaling */
        D_INFO("Initializing rate scaling for station %pM\n", sta->addr);
        il4965_rs_rate_init(il, sta, sta_id);
        mutex_unlock(&il->mutex);

        return 0;
}

void
il4965_mac_channel_switch(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
                          struct ieee80211_channel_switch *ch_switch)
{
        struct il_priv *il = hw->priv;
        const struct il_channel_info *ch_info;
        struct ieee80211_conf *conf = &hw->conf;
        struct ieee80211_channel *channel = ch_switch->chandef.chan;
        struct il_ht_config *ht_conf = &il->current_ht_config;
        u16 ch;

        D_MAC80211("enter\n");

        mutex_lock(&il->mutex);

        if (il_is_rfkill(il))
                goto out;

        if (test_bit(S_EXIT_PENDING, &il->status) ||
            test_bit(S_SCANNING, &il->status) ||
            test_bit(S_CHANNEL_SWITCH_PENDING, &il->status))
                goto out;

        if (!il_is_associated(il))
                goto out;

        if (!il->ops->set_channel_switch)
                goto out;

        ch = channel->hw_value;
        if (le16_to_cpu(il->active.channel) == ch)
                goto out;

        ch_info = il_get_channel_info(il, channel->band, ch);
        if (!il_is_channel_valid(ch_info)) {
                D_MAC80211("invalid channel\n");
                goto out;
        }

        spin_lock_irq(&il->lock);

        il->current_ht_config.smps = conf->smps_mode;

        /* Configure HT40 channels */
        switch (cfg80211_get_chandef_type(&ch_switch->chandef)) {
        case NL80211_CHAN_NO_HT:
        case NL80211_CHAN_HT20:
                il->ht.is_40mhz = false;
                il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
                break;
        case NL80211_CHAN_HT40MINUS:
                il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_BELOW;
                il->ht.is_40mhz = true;
                break;
        case NL80211_CHAN_HT40PLUS:
                il->ht.extension_chan_offset = IEEE80211_HT_PARAM_CHA_SEC_ABOVE;
                il->ht.is_40mhz = true;
                break;
        }

        if ((le16_to_cpu(il->staging.channel) != ch))
                il->staging.flags = 0;

        il_set_rxon_channel(il, channel);
        il_set_rxon_ht(il, ht_conf);
        il_set_flags_for_band(il, channel->band, il->vif);

        spin_unlock_irq(&il->lock);

        il_set_rate(il);
        /*
         * at this point, staging_rxon has the
         * configuration for channel switch
         */
        set_bit(S_CHANNEL_SWITCH_PENDING, &il->status);
        il->switch_channel = cpu_to_le16(ch);
        if (il->ops->set_channel_switch(il, ch_switch)) {
                clear_bit(S_CHANNEL_SWITCH_PENDING, &il->status);
                il->switch_channel = 0;
                ieee80211_chswitch_done(il->vif, false, 0);
        }

out:
        mutex_unlock(&il->mutex);
        D_MAC80211("leave\n");
}

void
il4965_configure_filter(struct ieee80211_hw *hw, unsigned int changed_flags,
                        unsigned int *total_flags, u64 multicast)
{
        struct il_priv *il = hw->priv;
        __le32 filter_or = 0, filter_nand = 0;

#define CHK(test, flag) do { \
        if (*total_flags & (test))              \
                filter_or |= (flag);            \
        else                                    \
                filter_nand |= (flag);          \
        } while (0)

        D_MAC80211("Enter: changed: 0x%x, total: 0x%x\n", changed_flags,
                   *total_flags);

        CHK(FIF_OTHER_BSS, RXON_FILTER_PROMISC_MSK);
        /* Setting _just_ RXON_FILTER_CTL2HOST_MSK causes FH errors */
        CHK(FIF_CONTROL, RXON_FILTER_CTL2HOST_MSK | RXON_FILTER_PROMISC_MSK);
        CHK(FIF_BCN_PRBRESP_PROMISC, RXON_FILTER_BCON_AWARE_MSK);

#undef CHK

        mutex_lock(&il->mutex);

        il->staging.filter_flags &= ~filter_nand;
        il->staging.filter_flags |= filter_or;

        /*
         * Not committing directly because hardware can perform a scan,
         * but we'll eventually commit the filter flags change anyway.
         */

        mutex_unlock(&il->mutex);

        /*
         * Receiving all multicast frames is always enabled by the
         * default flags setup in il_connection_init_rx_config()
         * since we currently do not support programming multicast
         * filters into the device.
         */
        *total_flags &=
            FIF_OTHER_BSS | FIF_ALLMULTI |
            FIF_BCN_PRBRESP_PROMISC | FIF_CONTROL;
}

/*****************************************************************************
 *
 * driver setup and teardown
 *
 *****************************************************************************/

static void
il4965_bg_txpower_work(struct work_struct *work)
{
        struct il_priv *il = container_of(work, struct il_priv,
                                          txpower_work);

        mutex_lock(&il->mutex);

        /* If a scan happened to start before we got here
         * then just return; the stats notification will
         * kick off another scheduled work to compensate for
         * any temperature delta we missed here. */
        if (test_bit(S_EXIT_PENDING, &il->status) ||
            test_bit(S_SCANNING, &il->status))
                goto out;

        /* Regardless of if we are associated, we must reconfigure the
         * TX power since frames can be sent on non-radar channels while
         * not associated */
        il->ops->send_tx_power(il);

        /* Update last_temperature to keep is_calib_needed from running
         * when it isn't needed... */
        il->last_temperature = il->temperature;
out:
        mutex_unlock(&il->mutex);
}

static int
il4965_setup_deferred_work(struct il_priv *il)
{
        il->workqueue = create_singlethread_workqueue(DRV_NAME);
        if (!il->workqueue)
                return -ENOMEM;

        init_waitqueue_head(&il->wait_command_queue);

        INIT_WORK(&il->restart, il4965_bg_restart);
        INIT_WORK(&il->rx_replenish, il4965_bg_rx_replenish);
        INIT_WORK(&il->run_time_calib_work, il4965_bg_run_time_calib_work);
        INIT_DELAYED_WORK(&il->init_alive_start, il4965_bg_init_alive_start);
        INIT_DELAYED_WORK(&il->alive_start, il4965_bg_alive_start);

        il_setup_scan_deferred_work(il);

        INIT_WORK(&il->txpower_work, il4965_bg_txpower_work);

        timer_setup(&il->stats_periodic, il4965_bg_stats_periodic, 0);

        timer_setup(&il->watchdog, il_bg_watchdog, 0);

        tasklet_setup(&il->irq_tasklet, il4965_irq_tasklet);

        return 0;
}

static void
il4965_cancel_deferred_work(struct il_priv *il)
{
        cancel_work_sync(&il->txpower_work);
        cancel_delayed_work_sync(&il->init_alive_start);
        cancel_delayed_work(&il->alive_start);
        cancel_work_sync(&il->run_time_calib_work);

        il_cancel_scan_deferred_work(il);

        timer_delete_sync(&il->stats_periodic);
}

static void
il4965_init_hw_rates(struct il_priv *il, struct ieee80211_rate *rates)
{
        int i;

        for (i = 0; i < RATE_COUNT_LEGACY; i++) {
                rates[i].bitrate = il_rates[i].ieee * 5;
                rates[i].hw_value = i;  /* Rate scaling will work on idxes */
                rates[i].hw_value_short = i;
                rates[i].flags = 0;
                if ((i >= IL_FIRST_CCK_RATE) && (i <= IL_LAST_CCK_RATE)) {
                        /*
                         * If CCK != 1M then set short preamble rate flag.
                         */
                        rates[i].flags |=
                            (il_rates[i].plcp ==
                             RATE_1M_PLCP) ? 0 : IEEE80211_RATE_SHORT_PREAMBLE;
                }
        }
}

/*
 * Acquire il->lock before calling this function !
 */
void
il4965_set_wr_ptrs(struct il_priv *il, int txq_id, u32 idx)
{
        il_wr(il, HBUS_TARG_WRPTR, (idx & 0xff) | (txq_id << 8));
        il_wr_prph(il, IL49_SCD_QUEUE_RDPTR(txq_id), idx);
}

void
il4965_tx_queue_set_status(struct il_priv *il, struct il_tx_queue *txq,
                           int tx_fifo_id, int scd_retry)
{
        int txq_id = txq->q.id;

        /* Find out whether to activate Tx queue */
        int active = test_bit(txq_id, &il->txq_ctx_active_msk) ? 1 : 0;

        /* Set up and activate */
        il_wr_prph(il, IL49_SCD_QUEUE_STATUS_BITS(txq_id),
                   (active << IL49_SCD_QUEUE_STTS_REG_POS_ACTIVE) |
                   (tx_fifo_id << IL49_SCD_QUEUE_STTS_REG_POS_TXF) |
                   (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_WSL) |
                   (scd_retry << IL49_SCD_QUEUE_STTS_REG_POS_SCD_ACK) |
                   IL49_SCD_QUEUE_STTS_REG_MSK);

        txq->sched_retry = scd_retry;

        D_INFO("%s %s Queue %d on AC %d\n", active ? "Activate" : "Deactivate",
               scd_retry ? "BA" : "AC", txq_id, tx_fifo_id);
}

static const struct ieee80211_ops il4965_mac_ops = {
        .add_chanctx = ieee80211_emulate_add_chanctx,
        .remove_chanctx = ieee80211_emulate_remove_chanctx,
        .change_chanctx = ieee80211_emulate_change_chanctx,
        .switch_vif_chanctx = ieee80211_emulate_switch_vif_chanctx,
        .tx = il4965_mac_tx,
        .wake_tx_queue = ieee80211_handle_wake_tx_queue,
        .start = il4965_mac_start,
        .stop = il4965_mac_stop,
        .add_interface = il_mac_add_interface,
        .remove_interface = il_mac_remove_interface,
        .change_interface = il_mac_change_interface,
        .config = il_mac_config,
        .configure_filter = il4965_configure_filter,
        .set_key = il4965_mac_set_key,
        .update_tkip_key = il4965_mac_update_tkip_key,
        .conf_tx = il_mac_conf_tx,
        .reset_tsf = il_mac_reset_tsf,
        .bss_info_changed = il_mac_bss_info_changed,
        .ampdu_action = il4965_mac_ampdu_action,
        .hw_scan = il_mac_hw_scan,
        .sta_add = il4965_mac_sta_add,
        .sta_remove = il_mac_sta_remove,
        .channel_switch = il4965_mac_channel_switch,
        .tx_last_beacon = il_mac_tx_last_beacon,
        .flush = il_mac_flush,
};

static int
il4965_init_drv(struct il_priv *il)
{
        int ret;

        spin_lock_init(&il->sta_lock);
        spin_lock_init(&il->hcmd_lock);

        INIT_LIST_HEAD(&il->free_frames);

        mutex_init(&il->mutex);

        il->ieee_channels = NULL;
        il->ieee_rates = NULL;
        il->band = NL80211_BAND_2GHZ;

        il->iw_mode = NL80211_IFTYPE_STATION;
        il->current_ht_config.smps = IEEE80211_SMPS_STATIC;
        il->missed_beacon_threshold = IL_MISSED_BEACON_THRESHOLD_DEF;

        /* initialize force reset */
        il->force_reset.reset_duration = IL_DELAY_NEXT_FORCE_FW_RELOAD;

        /* Choose which receivers/antennas to use */
        if (il->ops->set_rxon_chain)
                il->ops->set_rxon_chain(il);

        il_init_scan_params(il);

        ret = il_init_channel_map(il);
        if (ret) {
                IL_ERR("initializing regulatory failed: %d\n", ret);
                goto err;
        }

        ret = il_init_geos(il);
        if (ret) {
                IL_ERR("initializing geos failed: %d\n", ret);
                goto err_free_channel_map;
        }
        il4965_init_hw_rates(il, il->ieee_rates);

        return 0;

err_free_channel_map:
        il_free_channel_map(il);
err:
        return ret;
}

static void
il4965_uninit_drv(struct il_priv *il)
{
        il_free_geos(il);
        il_free_channel_map(il);
        kfree(il->scan_cmd);
}

static void
il4965_hw_detect(struct il_priv *il)
{
        il->hw_rev = _il_rd(il, CSR_HW_REV);
        il->hw_wa_rev = _il_rd(il, CSR_HW_REV_WA_REG);
        il->rev_id = il->pci_dev->revision;
        D_INFO("HW Revision ID = 0x%X\n", il->rev_id);
}

static const struct il_sensitivity_ranges il4965_sensitivity = {
        .min_nrg_cck = 97,
        .max_nrg_cck = 0,       /* not used, set to 0 */

        .auto_corr_min_ofdm = 85,
        .auto_corr_min_ofdm_mrc = 170,
        .auto_corr_min_ofdm_x1 = 105,
        .auto_corr_min_ofdm_mrc_x1 = 220,

        .auto_corr_max_ofdm = 120,
        .auto_corr_max_ofdm_mrc = 210,
        .auto_corr_max_ofdm_x1 = 140,
        .auto_corr_max_ofdm_mrc_x1 = 270,

        .auto_corr_min_cck = 125,
        .auto_corr_max_cck = 200,
        .auto_corr_min_cck_mrc = 200,
        .auto_corr_max_cck_mrc = 400,

        .nrg_th_cck = 100,
        .nrg_th_ofdm = 100,

        .barker_corr_th_min = 190,
        .barker_corr_th_min_mrc = 390,
        .nrg_th_cca = 62,
};

static void
il4965_set_hw_params(struct il_priv *il)
{
        il->hw_params.bcast_id = IL4965_BROADCAST_ID;
        il->hw_params.max_rxq_size = RX_QUEUE_SIZE;
        il->hw_params.max_rxq_log = RX_QUEUE_SIZE_LOG;
        if (il->cfg->mod_params->amsdu_size_8K)
                il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_8K);
        else
                il->hw_params.rx_page_order = get_order(IL_RX_BUF_SIZE_4K);

        il->hw_params.max_beacon_itrvl = IL_MAX_UCODE_BEACON_INTERVAL;

        if (il->cfg->mod_params->disable_11n)
                il->cfg->sku &= ~IL_SKU_N;

        if (il->cfg->mod_params->num_of_queues >= IL_MIN_NUM_QUEUES &&
            il->cfg->mod_params->num_of_queues <= IL49_NUM_QUEUES)
                il->cfg->num_of_queues =
                    il->cfg->mod_params->num_of_queues;

        il->hw_params.max_txq_num = il->cfg->num_of_queues;
        il->hw_params.dma_chnl_num = FH49_TCSR_CHNL_NUM;
        il->hw_params.scd_bc_tbls_size =
            il->cfg->num_of_queues *
            sizeof(struct il4965_scd_bc_tbl);

        il->hw_params.tfd_size = sizeof(struct il_tfd);
        il->hw_params.max_stations = IL4965_STATION_COUNT;
        il->hw_params.max_data_size = IL49_RTC_DATA_SIZE;
        il->hw_params.max_inst_size = IL49_RTC_INST_SIZE;
        il->hw_params.max_bsm_size = BSM_SRAM_SIZE;
        il->hw_params.ht40_channel = BIT(NL80211_BAND_5GHZ);

        il->hw_params.rx_wrt_ptr_reg = FH49_RSCSR_CHNL0_WPTR;

        il->hw_params.tx_chains_num = il4965_num_of_ant(il->cfg->valid_tx_ant);
        il->hw_params.rx_chains_num = il4965_num_of_ant(il->cfg->valid_rx_ant);
        il->hw_params.valid_tx_ant = il->cfg->valid_tx_ant;
        il->hw_params.valid_rx_ant = il->cfg->valid_rx_ant;

        il->hw_params.ct_kill_threshold =
           celsius_to_kelvin(CT_KILL_THRESHOLD_LEGACY);

        il->hw_params.sens = &il4965_sensitivity;
        il->hw_params.beacon_time_tsf_bits = IL4965_EXT_BEACON_TIME_POS;
}

static int
il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
        int err = 0;
        struct il_priv *il;
        struct ieee80211_hw *hw;
        struct il_cfg *cfg = (struct il_cfg *)(ent->driver_data);
        unsigned long flags;
        u16 pci_cmd;

        /************************
         * 1. Allocating HW data
         ************************/

        hw = ieee80211_alloc_hw(sizeof(struct il_priv), &il4965_mac_ops);
        if (!hw) {
                err = -ENOMEM;
                goto out;
        }
        il = hw->priv;
        il->hw = hw;
        SET_IEEE80211_DEV(hw, &pdev->dev);

        D_INFO("*** LOAD DRIVER ***\n");
        il->cfg = cfg;
        il->ops = &il4965_ops;
#ifdef CONFIG_IWLEGACY_DEBUGFS
        il->debugfs_ops = &il4965_debugfs_ops;
#endif
        il->pci_dev = pdev;
        il->inta_mask = CSR_INI_SET_MASK;

        /**************************
         * 2. Initializing PCI bus
         **************************/
        pci_disable_link_state(pdev,
                               PCIE_LINK_STATE_L0S | PCIE_LINK_STATE_L1 |
                               PCIE_LINK_STATE_CLKPM);

        if (pci_enable_device(pdev)) {
                err = -ENODEV;
                goto out_ieee80211_free_hw;
        }

        pci_set_master(pdev);

        err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(36));
        if (err) {
                err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
                /* both attempts failed: */
                if (err) {
                        IL_WARN("No suitable DMA available.\n");
                        goto out_pci_disable_device;
                }
        }

        err = pci_request_regions(pdev, DRV_NAME);
        if (err)
                goto out_pci_disable_device;

        pci_set_drvdata(pdev, il);

        /***********************
         * 3. Read REV register
         ***********************/
        il->hw_base = pci_ioremap_bar(pdev, 0);
        if (!il->hw_base) {
                err = -ENODEV;
                goto out_pci_release_regions;
        }

        D_INFO("pci_resource_len = 0x%08llx\n",
               (unsigned long long)pci_resource_len(pdev, 0));
        D_INFO("pci_resource_base = %p\n", il->hw_base);

        /* these spin locks will be used in apm_ops.init and EEPROM access
         * we should init now
         */
        spin_lock_init(&il->reg_lock);
        spin_lock_init(&il->lock);

        /*
         * stop and reset the on-board processor just in case it is in a
         * strange state ... like being left stranded by a primary kernel
         * and this is now the kdump kernel trying to start up
         */
        _il_wr(il, CSR_RESET, CSR_RESET_REG_FLAG_NEVO_RESET);

        il4965_hw_detect(il);
        IL_INFO("Detected %s, REV=0x%X\n", il->cfg->name, il->hw_rev);

        /* We disable the RETRY_TIMEOUT register (0x41) to keep
         * PCI Tx retries from interfering with C3 CPU state */
        pci_write_config_byte(pdev, PCI_CFG_RETRY_TIMEOUT, 0x00);

        il4965_prepare_card_hw(il);
        if (!il->hw_ready) {
                IL_WARN("Failed, HW not ready\n");
                err = -EIO;
                goto out_iounmap;
        }

        /*****************
         * 4. Read EEPROM
         *****************/
        /* Read the EEPROM */
        err = il_eeprom_init(il);
        if (err) {
                IL_ERR("Unable to init EEPROM\n");
                goto out_iounmap;
        }
        err = il4965_eeprom_check_version(il);
        if (err)
                goto out_free_eeprom;

        /* extract MAC Address */
        il4965_eeprom_get_mac(il, il->addresses[0].addr);
        D_INFO("MAC address: %pM\n", il->addresses[0].addr);
        il->hw->wiphy->addresses = il->addresses;
        il->hw->wiphy->n_addresses = 1;

        /************************
         * 5. Setup HW constants
         ************************/
        il4965_set_hw_params(il);

        /*******************
         * 6. Setup il
         *******************/

        err = il4965_init_drv(il);
        if (err)
                goto out_free_eeprom;
        /* At this point both hw and il are initialized. */

        /********************
         * 7. Setup services
         ********************/
        spin_lock_irqsave(&il->lock, flags);
        il_disable_interrupts(il);
        spin_unlock_irqrestore(&il->lock, flags);

        pci_enable_msi(il->pci_dev);

        err = request_irq(il->pci_dev->irq, il_isr, IRQF_SHARED, DRV_NAME, il);
        if (err) {
                IL_ERR("Error allocating IRQ %d\n", il->pci_dev->irq);
                goto out_disable_msi;
        }

        err = il4965_setup_deferred_work(il);
        if (err)
                goto out_free_irq;

        il4965_setup_handlers(il);

        /*********************************************
         * 8. Enable interrupts and read RFKILL state
         *********************************************/

        /* enable rfkill interrupt: hw bug w/a */
        pci_read_config_word(il->pci_dev, PCI_COMMAND, &pci_cmd);
        if (pci_cmd & PCI_COMMAND_INTX_DISABLE) {
                pci_cmd &= ~PCI_COMMAND_INTX_DISABLE;
                pci_write_config_word(il->pci_dev, PCI_COMMAND, pci_cmd);
        }

        il_enable_rfkill_int(il);

        /* If platform's RF_KILL switch is NOT set to KILL */
        if (_il_rd(il, CSR_GP_CNTRL) & CSR_GP_CNTRL_REG_FLAG_HW_RF_KILL_SW)
                clear_bit(S_RFKILL, &il->status);
        else
                set_bit(S_RFKILL, &il->status);

        wiphy_rfkill_set_hw_state(il->hw->wiphy,
                                  test_bit(S_RFKILL, &il->status));

        il_power_initialize(il);

        init_completion(&il->_4965.firmware_loading_complete);

        err = il4965_request_firmware(il, true);
        if (err)
                goto out_destroy_workqueue;

        return 0;

out_destroy_workqueue:
        destroy_workqueue(il->workqueue);
        il->workqueue = NULL;
out_free_irq:
        free_irq(il->pci_dev->irq, il);
out_disable_msi:
        pci_disable_msi(il->pci_dev);
        il4965_uninit_drv(il);
out_free_eeprom:
        il_eeprom_free(il);
out_iounmap:
        iounmap(il->hw_base);
out_pci_release_regions:
        pci_release_regions(pdev);
out_pci_disable_device:
        pci_disable_device(pdev);
out_ieee80211_free_hw:
        ieee80211_free_hw(il->hw);
out:
        return err;
}

static void
il4965_pci_remove(struct pci_dev *pdev)
{
        struct il_priv *il = pci_get_drvdata(pdev);
        unsigned long flags;

        if (!il)
                return;

        wait_for_completion(&il->_4965.firmware_loading_complete);

        D_INFO("*** UNLOAD DRIVER ***\n");

        il_dbgfs_unregister(il);
        sysfs_remove_group(&pdev->dev.kobj, &il_attribute_group);

        /* ieee80211_unregister_hw call wil cause il_mac_stop to
         * be called and il4965_down since we are removing the device
         * we need to set S_EXIT_PENDING bit.
         */
        set_bit(S_EXIT_PENDING, &il->status);

        il_leds_exit(il);

        if (il->mac80211_registered) {
                ieee80211_unregister_hw(il->hw);
                il->mac80211_registered = 0;
        } else {
                il4965_down(il);
        }

        /*
         * Make sure device is reset to low power before unloading driver.
         * This may be redundant with il4965_down(), but there are paths to
         * run il4965_down() without calling apm_ops.stop(), and there are
         * paths to avoid running il4965_down() at all before leaving driver.
         * This (inexpensive) call *makes sure* device is reset.
         */
        il_apm_stop(il);

        /* make sure we flush any pending irq or
         * tasklet for the driver
         */
        spin_lock_irqsave(&il->lock, flags);
        il_disable_interrupts(il);
        spin_unlock_irqrestore(&il->lock, flags);

        il4965_synchronize_irq(il);

        il4965_dealloc_ucode_pci(il);

        if (il->rxq.bd)
                il4965_rx_queue_free(il, &il->rxq);
        il4965_hw_txq_ctx_free(il);

        il_eeprom_free(il);

        /*netif_stop_queue(dev); */

        /* ieee80211_unregister_hw calls il_mac_stop, which flushes
         * il->workqueue... so we can't take down the workqueue
         * until now... */
        destroy_workqueue(il->workqueue);
        il->workqueue = NULL;

        free_irq(il->pci_dev->irq, il);
        pci_disable_msi(il->pci_dev);
        iounmap(il->hw_base);
        pci_release_regions(pdev);
        pci_disable_device(pdev);

        il4965_uninit_drv(il);

        dev_kfree_skb(il->beacon_skb);

        ieee80211_free_hw(il->hw);
}

/*
 * Activate/Deactivate Tx DMA/FIFO channels according tx fifos mask
 * must be called under il->lock and mac access
 */
void
il4965_txq_set_sched(struct il_priv *il, u32 mask)
{
        il_wr_prph(il, IL49_SCD_TXFACT, mask);
}

/*****************************************************************************
 *
 * driver and module entry point
 *
 *****************************************************************************/

/* Hardware specific file defines the PCI IDs table for that hardware module */
static const struct pci_device_id il4965_hw_card_ids[] = {
        {IL_PCI_DEVICE(0x4229, PCI_ANY_ID, il4965_cfg)},
        {IL_PCI_DEVICE(0x4230, PCI_ANY_ID, il4965_cfg)},
        {0}
};
MODULE_DEVICE_TABLE(pci, il4965_hw_card_ids);

static struct pci_driver il4965_driver = {
        .name = DRV_NAME,
        .id_table = il4965_hw_card_ids,
        .probe = il4965_pci_probe,
        .remove = il4965_pci_remove,
        .driver.pm = IL_LEGACY_PM_OPS,
};

static int __init
il4965_init(void)
{

        int ret;
        pr_info(DRV_DESCRIPTION ", " DRV_VERSION "\n");
        pr_info(DRV_COPYRIGHT "\n");

        ret = il4965_rate_control_register();
        if (ret) {
                pr_err("Unable to register rate control algorithm: %d\n", ret);
                return ret;
        }

        ret = pci_register_driver(&il4965_driver);
        if (ret) {
                pr_err("Unable to initialize PCI module\n");
                goto error_register;
        }

        return ret;

error_register:
        il4965_rate_control_unregister();
        return ret;
}

static void __exit
il4965_exit(void)
{
        pci_unregister_driver(&il4965_driver);
        il4965_rate_control_unregister();
}

module_exit(il4965_exit);
module_init(il4965_init);

#ifdef CONFIG_IWLEGACY_DEBUG
module_param_named(debug, il_debug_level, uint, 0644);
MODULE_PARM_DESC(debug, "debug output mask");
#endif

module_param_named(swcrypto, il4965_mod_params.sw_crypto, int, 0444);
MODULE_PARM_DESC(swcrypto, "using crypto in software (default 0 [hardware])");
module_param_named(queues_num, il4965_mod_params.num_of_queues, int, 0444);
MODULE_PARM_DESC(queues_num, "number of hw queues.");
module_param_named(11n_disable, il4965_mod_params.disable_11n, int, 0444);
MODULE_PARM_DESC(11n_disable, "disable 11n functionality");
module_param_named(amsdu_size_8K, il4965_mod_params.amsdu_size_8K, int, 0444);
MODULE_PARM_DESC(amsdu_size_8K, "enable 8K amsdu size (default 0 [disabled])");
module_param_named(fw_restart, il4965_mod_params.restart_fw, int, 0444);
MODULE_PARM_DESC(fw_restart, "restart firmware in case of error");