// SPDX-License-Identifier: GPL-2.0
/*
 * drivers/base/dd.c - The core device/driver interactions.
 *
 * This file contains the (sometimes tricky) code that controls the
 * interactions between devices and drivers, which primarily includes
 * driver binding and unbinding.
 *
 * All of this code used to exist in drivers/base/bus.c, but was
 * relocated to here in the name of compartmentalization (since it wasn't
 * strictly code just for the 'struct bus_type'.
 *
 * Copyright (c) 2002-5 Patrick Mochel
 * Copyright (c) 2002-3 Open Source Development Labs
 * Copyright (c) 2007-2009 Greg Kroah-Hartman <gregkh@suse.de>
 * Copyright (c) 2007-2009 Novell Inc.
 */

#include <linux/debugfs.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/dma-map-ops.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/kthread.h>
#include <linux/wait.h>
#include <linux/async.h>
#include <linux/pm_domain.h>
#include <linux/pm_runtime.h>
#include <linux/pinctrl/devinfo.h>
#include <linux/slab.h>

#include "base.h"
#include "power/power.h"

/*
 * Deferred Probe infrastructure.
 *
 * Sometimes driver probe order matters, but the kernel doesn't always have
 * dependency information which means some drivers will get probed before a
 * resource it depends on is available.  For example, an SDHCI driver may
 * first need a GPIO line from an i2c GPIO controller before it can be
 * initialized.  If a required resource is not available yet, a driver can
 * request probing to be deferred by returning -EPROBE_DEFER from its probe hook
 *
 * Deferred probe maintains two lists of devices, a pending list and an active
 * list.  A driver returning -EPROBE_DEFER causes the device to be added to the
 * pending list.  A successful driver probe will trigger moving all devices
 * from the pending to the active list so that the workqueue will eventually
 * retry them.
 *
 * The deferred_probe_mutex must be held any time the deferred_probe_*_list
 * of the (struct device*)->p->deferred_probe pointers are manipulated
 */
static DEFINE_MUTEX(deferred_probe_mutex);
static LIST_HEAD(deferred_probe_pending_list);
static LIST_HEAD(deferred_probe_active_list);
static atomic_t deferred_trigger_count = ATOMIC_INIT(0);
static bool initcalls_done;

/* Save the async probe drivers' name from kernel cmdline */
#define ASYNC_DRV_NAMES_MAX_LEN 256
static char async_probe_drv_names[ASYNC_DRV_NAMES_MAX_LEN];
static bool async_probe_default;

/*
 * In some cases, like suspend to RAM or hibernation, It might be reasonable
 * to prohibit probing of devices as it could be unsafe.
 * Once defer_all_probes is true all drivers probes will be forcibly deferred.
 */
static bool defer_all_probes;

static void __device_set_deferred_probe_reason(const struct device *dev, char *reason)
{
        kfree(dev->p->deferred_probe_reason);
        dev->p->deferred_probe_reason = reason;
}

/*
 * deferred_probe_work_func() - Retry probing devices in the active list.
 */
static void deferred_probe_work_func(struct work_struct *work)
{
        struct device *dev;
        struct device_private *private;
        /*
         * This block processes every device in the deferred 'active' list.
         * Each device is removed from the active list and passed to
         * bus_probe_device() to re-attempt the probe.  The loop continues
         * until every device in the active list is removed and retried.
         *
         * Note: Once the device is removed from the list and the mutex is
         * released, it is possible for the device get freed by another thread
         * and cause a illegal pointer dereference.  This code uses
         * get/put_device() to ensure the device structure cannot disappear
         * from under our feet.
         */
        mutex_lock(&deferred_probe_mutex);
        while (!list_empty(&deferred_probe_active_list)) {
                private = list_first_entry(&deferred_probe_active_list,
                                        typeof(*dev->p), deferred_probe);
                dev = private->device;
                list_del_init(&private->deferred_probe);

                get_device(dev);

                __device_set_deferred_probe_reason(dev, NULL);

                /*
                 * Drop the mutex while probing each device; the probe path may
                 * manipulate the deferred list
                 */
                mutex_unlock(&deferred_probe_mutex);

                /*
                 * Force the device to the end of the dpm_list since
                 * the PM code assumes that the order we add things to
                 * the list is a good order for suspend but deferred
                 * probe makes that very unsafe.
                 */
                device_pm_move_to_tail(dev);

                dev_dbg(dev, "Retrying from deferred list\n");
                bus_probe_device(dev);
                mutex_lock(&deferred_probe_mutex);

                put_device(dev);
        }
        mutex_unlock(&deferred_probe_mutex);
}
static DECLARE_WORK(deferred_probe_work, deferred_probe_work_func);

void driver_deferred_probe_add(struct device *dev)
{
        if (!dev->can_match)
                return;

        mutex_lock(&deferred_probe_mutex);
        if (list_empty(&dev->p->deferred_probe)) {
                dev_dbg(dev, "Added to deferred list\n");
                list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list);
        }
        mutex_unlock(&deferred_probe_mutex);
}

void driver_deferred_probe_del(struct device *dev)
{
        mutex_lock(&deferred_probe_mutex);
        if (!list_empty(&dev->p->deferred_probe)) {
                dev_dbg(dev, "Removed from deferred list\n");
                list_del_init(&dev->p->deferred_probe);
                __device_set_deferred_probe_reason(dev, NULL);
        }
        mutex_unlock(&deferred_probe_mutex);
}

static bool driver_deferred_probe_enable;
/**
 * driver_deferred_probe_trigger() - Kick off re-probing deferred devices
 *
 * This functions moves all devices from the pending list to the active
 * list and schedules the deferred probe workqueue to process them.  It
 * should be called anytime a driver is successfully bound to a device.
 *
 * Note, there is a race condition in multi-threaded probe. In the case where
 * more than one device is probing at the same time, it is possible for one
 * probe to complete successfully while another is about to defer. If the second
 * depends on the first, then it will get put on the pending list after the
 * trigger event has already occurred and will be stuck there.
 *
 * The atomic 'deferred_trigger_count' is used to determine if a successful
 * trigger has occurred in the midst of probing a driver. If the trigger count
 * changes in the midst of a probe, then deferred processing should be triggered
 * again.
 */
void driver_deferred_probe_trigger(void)
{
        if (!driver_deferred_probe_enable)
                return;

        /*
         * A successful probe means that all the devices in the pending list
         * should be triggered to be reprobed.  Move all the deferred devices
         * into the active list so they can be retried by the workqueue
         */
        mutex_lock(&deferred_probe_mutex);
        atomic_inc(&deferred_trigger_count);
        list_splice_tail_init(&deferred_probe_pending_list,
                              &deferred_probe_active_list);
        mutex_unlock(&deferred_probe_mutex);

        /*
         * Kick the re-probe thread.  It may already be scheduled, but it is
         * safe to kick it again.
         */
        queue_work(system_dfl_wq, &deferred_probe_work);
}

/**
 * device_block_probing() - Block/defer device's probes
 *
 *      It will disable probing of devices and defer their probes instead.
 */
void device_block_probing(void)
{
        defer_all_probes = true;
        /* sync with probes to avoid races. */
        wait_for_device_probe();
}

/**
 * device_unblock_probing() - Unblock/enable device's probes
 *
 *      It will restore normal behavior and trigger re-probing of deferred
 * devices.
 */
void device_unblock_probing(void)
{
        defer_all_probes = false;
        driver_deferred_probe_trigger();
}

/**
 * device_set_deferred_probe_reason() - Set defer probe reason message for device
 * @dev: the pointer to the struct device
 * @vaf: the pointer to va_format structure with message
 */
void device_set_deferred_probe_reason(const struct device *dev, struct va_format *vaf)
{
        const char *drv = dev_driver_string(dev);
        char *reason;

        mutex_lock(&deferred_probe_mutex);

        reason = kasprintf(GFP_KERNEL, "%s: %pV", drv, vaf);
        __device_set_deferred_probe_reason(dev, reason);

        mutex_unlock(&deferred_probe_mutex);
}

/*
 * deferred_devs_show() - Show the devices in the deferred probe pending list.
 */
static int deferred_devs_show(struct seq_file *s, void *data)
{
        struct device_private *curr;

        mutex_lock(&deferred_probe_mutex);

        list_for_each_entry(curr, &deferred_probe_pending_list, deferred_probe)
                seq_printf(s, "%s\t%s", dev_name(curr->device),
                           curr->deferred_probe_reason ?: "\n");

        mutex_unlock(&deferred_probe_mutex);

        return 0;
}
DEFINE_SHOW_ATTRIBUTE(deferred_devs);

#ifdef CONFIG_MODULES
static int driver_deferred_probe_timeout = 10;
#else
static int driver_deferred_probe_timeout;
#endif

static int __init deferred_probe_timeout_setup(char *str)
{
        int timeout;

        if (!kstrtoint(str, 10, &timeout))
                driver_deferred_probe_timeout = timeout;
        return 1;
}
__setup("deferred_probe_timeout=", deferred_probe_timeout_setup);

/**
 * driver_deferred_probe_check_state() - Check deferred probe state
 * @dev: device to check
 *
 * Return:
 * * -ENODEV if initcalls have completed and modules are disabled.
 * * -ETIMEDOUT if the deferred probe timeout was set and has expired
 *   and modules are enabled.
 * * -EPROBE_DEFER in other cases.
 *
 * Drivers or subsystems can opt-in to calling this function instead of directly
 * returning -EPROBE_DEFER.
 */
int driver_deferred_probe_check_state(struct device *dev)
{
        if (!IS_ENABLED(CONFIG_MODULES) && initcalls_done) {
                dev_warn(dev, "ignoring dependency for device, assuming no driver\n");
                return -ENODEV;
        }

        if (!driver_deferred_probe_timeout && initcalls_done) {
                dev_warn(dev, "deferred probe timeout, ignoring dependency\n");
                return -ETIMEDOUT;
        }

        return -EPROBE_DEFER;
}
EXPORT_SYMBOL_GPL(driver_deferred_probe_check_state);

static void deferred_probe_timeout_work_func(struct work_struct *work)
{
        struct device_private *p;

        fw_devlink_drivers_done();

        driver_deferred_probe_timeout = 0;
        driver_deferred_probe_trigger();
        flush_work(&deferred_probe_work);

        mutex_lock(&deferred_probe_mutex);
        list_for_each_entry(p, &deferred_probe_pending_list, deferred_probe)
                dev_warn(p->device, "deferred probe pending: %s", p->deferred_probe_reason ?: "(reason unknown)\n");
        mutex_unlock(&deferred_probe_mutex);

        fw_devlink_probing_done();
}
static DECLARE_DELAYED_WORK(deferred_probe_timeout_work, deferred_probe_timeout_work_func);

void deferred_probe_extend_timeout(void)
{
        /*
         * If the work hasn't been queued yet or if the work expired, don't
         * start a new one.
         */
        if (cancel_delayed_work(&deferred_probe_timeout_work)) {
                schedule_delayed_work(&deferred_probe_timeout_work,
                                driver_deferred_probe_timeout * HZ);
                pr_debug("Extended deferred probe timeout by %d secs\n",
                                        driver_deferred_probe_timeout);
        }
}

/**
 * deferred_probe_initcall() - Enable probing of deferred devices
 *
 * We don't want to get in the way when the bulk of drivers are getting probed.
 * Instead, this initcall makes sure that deferred probing is delayed until
 * late_initcall time.
 */
static int deferred_probe_initcall(void)
{
        debugfs_create_file("devices_deferred", 0444, NULL, NULL,
                            &deferred_devs_fops);

        driver_deferred_probe_enable = true;
        driver_deferred_probe_trigger();
        /* Sort as many dependencies as possible before exiting initcalls */
        flush_work(&deferred_probe_work);
        initcalls_done = true;

        if (!IS_ENABLED(CONFIG_MODULES))
                fw_devlink_drivers_done();

        /*
         * Trigger deferred probe again, this time we won't defer anything
         * that is optional
         */
        driver_deferred_probe_trigger();
        flush_work(&deferred_probe_work);

        if (driver_deferred_probe_timeout > 0) {
                schedule_delayed_work(&deferred_probe_timeout_work,
                        driver_deferred_probe_timeout * HZ);
        }

        if (!IS_ENABLED(CONFIG_MODULES))
                fw_devlink_probing_done();

        return 0;
}
late_initcall(deferred_probe_initcall);

static void __exit deferred_probe_exit(void)
{
        debugfs_lookup_and_remove("devices_deferred", NULL);
}
__exitcall(deferred_probe_exit);

int __device_set_driver_override(struct device *dev, const char *s, size_t len)
{
        const char *new, *old;
        char *cp;

        if (!s)
                return -EINVAL;

        /*
         * The stored value will be used in sysfs show callback (sysfs_emit()),
         * which has a length limit of PAGE_SIZE and adds a trailing newline.
         * Thus we can store one character less to avoid truncation during sysfs
         * show.
         */
        if (len >= (PAGE_SIZE - 1))
                return -EINVAL;

        /*
         * Compute the real length of the string in case userspace sends us a
         * bunch of \0 characters like python likes to do.
         */
        len = strlen(s);

        if (!len) {
                /* Empty string passed - clear override */
                spin_lock(&dev->driver_override.lock);
                old = dev->driver_override.name;
                dev->driver_override.name = NULL;
                spin_unlock(&dev->driver_override.lock);
                kfree(old);

                return 0;
        }

        cp = strnchr(s, len, '\n');
        if (cp)
                len = cp - s;

        new = kstrndup(s, len, GFP_KERNEL);
        if (!new)
                return -ENOMEM;

        spin_lock(&dev->driver_override.lock);
        old = dev->driver_override.name;
        if (cp != s) {
                dev->driver_override.name = new;
                spin_unlock(&dev->driver_override.lock);
        } else {
                /* "\n" passed - clear override */
                dev->driver_override.name = NULL;
                spin_unlock(&dev->driver_override.lock);

                kfree(new);
        }
        kfree(old);

        return 0;
}
EXPORT_SYMBOL_GPL(__device_set_driver_override);

/**
 * device_is_bound() - Check if device is bound to a driver
 * @dev: device to check
 *
 * Returns true if passed device has already finished probing successfully
 * against a driver.
 *
 * This function must be called with the device lock held.
 */
bool device_is_bound(struct device *dev)
{
        return dev->p && klist_node_attached(&dev->p->knode_driver);
}
EXPORT_SYMBOL_GPL(device_is_bound);

static void driver_bound(struct device *dev)
{
        if (device_is_bound(dev)) {
                dev_warn(dev, "%s: device already bound\n", __func__);
                return;
        }

        dev_dbg(dev, "driver: '%s': %s: bound to device\n", dev->driver->name,
                __func__);

        klist_add_tail(&dev->p->knode_driver, &dev->driver->p->klist_devices);
        device_links_driver_bound(dev);

        device_pm_check_callbacks(dev);

        /*
         * Make sure the device is no longer in one of the deferred lists and
         * kick off retrying all pending devices
         */
        driver_deferred_probe_del(dev);
        driver_deferred_probe_trigger();

        bus_notify(dev, BUS_NOTIFY_BOUND_DRIVER);
        kobject_uevent(&dev->kobj, KOBJ_BIND);
}

static ssize_t coredump_store(struct device *dev, struct device_attribute *attr,
                            const char *buf, size_t count)
{
        device_lock(dev);
        dev->driver->coredump(dev);
        device_unlock(dev);

        return count;
}
static DEVICE_ATTR_WO(coredump);

static int driver_sysfs_add(struct device *dev)
{
        int ret;

        bus_notify(dev, BUS_NOTIFY_BIND_DRIVER);

        ret = sysfs_create_link(&dev->driver->p->kobj, &dev->kobj,
                                kobject_name(&dev->kobj));
        if (ret)
                goto fail;

        ret = sysfs_create_link(&dev->kobj, &dev->driver->p->kobj,
                                "driver");
        if (ret)
                goto rm_dev;

        if (!IS_ENABLED(CONFIG_DEV_COREDUMP) || !dev->driver->coredump)
                return 0;

        ret = device_create_file(dev, &dev_attr_coredump);
        if (!ret)
                return 0;

        sysfs_remove_link(&dev->kobj, "driver");

rm_dev:
        sysfs_remove_link(&dev->driver->p->kobj,
                          kobject_name(&dev->kobj));

fail:
        return ret;
}

static void driver_sysfs_remove(struct device *dev)
{
        struct device_driver *drv = dev->driver;

        if (drv) {
                if (drv->coredump)
                        device_remove_file(dev, &dev_attr_coredump);
                sysfs_remove_link(&drv->p->kobj, kobject_name(&dev->kobj));
                sysfs_remove_link(&dev->kobj, "driver");
        }
}

/**
 * device_bind_driver - bind a driver to one device.
 * @dev: device.
 *
 * Allow manual attachment of a driver to a device.
 * Caller must have already set @dev->driver.
 *
 * Note that this does not modify the bus reference count.
 * Please verify that is accounted for before calling this.
 * (It is ok to call with no other effort from a driver's probe() method.)
 *
 * This function must be called with the device lock held.
 *
 * Callers should prefer to use device_driver_attach() instead.
 */
int device_bind_driver(struct device *dev)
{
        int ret;

        ret = driver_sysfs_add(dev);
        if (!ret) {
                device_links_force_bind(dev);
                driver_bound(dev);
        }
        else
                bus_notify(dev, BUS_NOTIFY_DRIVER_NOT_BOUND);
        return ret;
}
EXPORT_SYMBOL_GPL(device_bind_driver);

static atomic_t probe_count = ATOMIC_INIT(0);
static DECLARE_WAIT_QUEUE_HEAD(probe_waitqueue);

static ssize_t state_synced_store(struct device *dev,
                                  struct device_attribute *attr,
                                  const char *buf, size_t count)
{
        int ret = 0;

        if (strcmp("1", buf))
                return -EINVAL;

        device_lock(dev);
        if (!dev->state_synced) {
                dev->state_synced = true;
                dev_sync_state(dev);
        } else {
                ret = -EINVAL;
        }
        device_unlock(dev);

        return ret ? ret : count;
}

static ssize_t state_synced_show(struct device *dev,
                                 struct device_attribute *attr, char *buf)
{
        bool val;

        device_lock(dev);
        val = dev->state_synced;
        device_unlock(dev);

        return sysfs_emit(buf, "%u\n", val);
}
static DEVICE_ATTR_RW(state_synced);

static void device_unbind_cleanup(struct device *dev)
{
        devres_release_all(dev);
        if (dev->driver->p_cb.post_unbind_rust)
                dev->driver->p_cb.post_unbind_rust(dev);
        arch_teardown_dma_ops(dev);
        kfree(dev->dma_range_map);
        dev->dma_range_map = NULL;
        device_set_driver(dev, NULL);
        dev_set_drvdata(dev, NULL);
        dev_pm_domain_detach(dev, dev->power.detach_power_off);
        if (dev->pm_domain && dev->pm_domain->dismiss)
                dev->pm_domain->dismiss(dev);
        pm_runtime_reinit(dev);
        dev_pm_set_driver_flags(dev, 0);
}

static void device_remove(struct device *dev)
{
        device_remove_file(dev, &dev_attr_state_synced);
        device_remove_groups(dev, dev->driver->dev_groups);

        if (dev->bus && dev->bus->remove)
                dev->bus->remove(dev);
        else if (dev->driver->remove)
                dev->driver->remove(dev);
}

static int call_driver_probe(struct device *dev, const struct device_driver *drv)
{
        int ret = 0;

        if (dev->bus->probe)
                ret = dev->bus->probe(dev);
        else if (drv->probe)
                ret = drv->probe(dev);

        switch (ret) {
        case 0:
                break;
        case -EPROBE_DEFER:
                /* Driver requested deferred probing */
                dev_dbg(dev, "Driver %s requests probe deferral\n", drv->name);
                break;
        case -ENODEV:
        case -ENXIO:
                dev_dbg(dev, "probe with driver %s rejects match %d\n",
                        drv->name, ret);
                break;
        default:
                /* driver matched but the probe failed */
                dev_err(dev, "probe with driver %s failed with error %d\n",
                        drv->name, ret);
                break;
        }

        return ret;
}

static int really_probe(struct device *dev, const struct device_driver *drv)
{
        bool test_remove = IS_ENABLED(CONFIG_DEBUG_TEST_DRIVER_REMOVE) &&
                           !drv->suppress_bind_attrs;
        int ret, link_ret;

        if (defer_all_probes) {
                /*
                 * Value of defer_all_probes can be set only by
                 * device_block_probing() which, in turn, will call
                 * wait_for_device_probe() right after that to avoid any races.
                 */
                dev_dbg(dev, "Driver %s force probe deferral\n", drv->name);
                return -EPROBE_DEFER;
        }

        link_ret = device_links_check_suppliers(dev);
        if (link_ret == -EPROBE_DEFER)
                return link_ret;

        dev_dbg(dev, "bus: '%s': %s: probing driver %s with device\n",
                drv->bus->name, __func__, drv->name);
        if (!list_empty(&dev->devres_head)) {
                dev_crit(dev, "Resources present before probing\n");
                ret = -EBUSY;
                goto done;
        }

re_probe:
        device_set_driver(dev, drv);

        /* If using pinctrl, bind pins now before probing */
        ret = pinctrl_bind_pins(dev);
        if (ret)
                goto pinctrl_bind_failed;

        if (dev->bus->dma_configure) {
                ret = dev->bus->dma_configure(dev);
                if (ret)
                        goto pinctrl_bind_failed;
        }

        ret = driver_sysfs_add(dev);
        if (ret) {
                dev_err(dev, "%s: driver_sysfs_add failed\n", __func__);
                goto sysfs_failed;
        }

        if (dev->pm_domain && dev->pm_domain->activate) {
                ret = dev->pm_domain->activate(dev);
                if (ret)
                        goto probe_failed;
        }

        ret = call_driver_probe(dev, drv);
        if (ret) {
                /*
                 * If fw_devlink_best_effort is active (denoted by -EAGAIN), the
                 * device might actually probe properly once some of its missing
                 * suppliers have probed. So, treat this as if the driver
                 * returned -EPROBE_DEFER.
                 */
                if (link_ret == -EAGAIN)
                        ret = -EPROBE_DEFER;

                /*
                 * Return probe errors as positive values so that the callers
                 * can distinguish them from other errors.
                 */
                ret = -ret;
                goto probe_failed;
        }

        ret = device_add_groups(dev, drv->dev_groups);
        if (ret) {
                dev_err(dev, "device_add_groups() failed\n");
                goto dev_groups_failed;
        }

        if (dev_has_sync_state(dev)) {
                ret = device_create_file(dev, &dev_attr_state_synced);
                if (ret) {
                        dev_err(dev, "state_synced sysfs add failed\n");
                        goto dev_sysfs_state_synced_failed;
                }
        }

        if (test_remove) {
                test_remove = false;

                device_remove(dev);
                driver_sysfs_remove(dev);
                if (dev->bus && dev->bus->dma_cleanup)
                        dev->bus->dma_cleanup(dev);
                device_unbind_cleanup(dev);

                goto re_probe;
        }

        pinctrl_init_done(dev);

        if (dev->pm_domain && dev->pm_domain->sync)
                dev->pm_domain->sync(dev);

        driver_bound(dev);
        dev_dbg(dev, "bus: '%s': %s: bound device to driver %s\n",
                drv->bus->name, __func__, drv->name);
        goto done;

dev_sysfs_state_synced_failed:
dev_groups_failed:
        device_remove(dev);
probe_failed:
        driver_sysfs_remove(dev);
sysfs_failed:
        bus_notify(dev, BUS_NOTIFY_DRIVER_NOT_BOUND);
        if (dev->bus && dev->bus->dma_cleanup)
                dev->bus->dma_cleanup(dev);
pinctrl_bind_failed:
        device_links_no_driver(dev);
        device_unbind_cleanup(dev);
done:
        return ret;
}

/*
 * For initcall_debug, show the driver probe time.
 */
static int really_probe_debug(struct device *dev, const struct device_driver *drv)
{
        ktime_t calltime, rettime;
        int ret;

        calltime = ktime_get();
        ret = really_probe(dev, drv);
        rettime = ktime_get();
        /*
         * Don't change this to pr_debug() because that requires
         * CONFIG_DYNAMIC_DEBUG and we want a simple 'initcall_debug' on the
         * kernel commandline to print this all the time at the debug level.
         */
        printk(KERN_DEBUG "probe of %s returned %d after %lld usecs\n",
                 dev_name(dev), ret, ktime_us_delta(rettime, calltime));
        return ret;
}

/**
 * driver_probe_done
 * Determine if the probe sequence is finished or not.
 *
 * Should somehow figure out how to use a semaphore, not an atomic variable...
 */
bool __init driver_probe_done(void)
{
        int local_probe_count = atomic_read(&probe_count);

        pr_debug("%s: probe_count = %d\n", __func__, local_probe_count);
        return !local_probe_count;
}

/**
 * wait_for_device_probe
 * Wait for device probing to be completed.
 */
void wait_for_device_probe(void)
{
        /* wait for the deferred probe workqueue to finish */
        flush_work(&deferred_probe_work);

        /* wait for the known devices to complete their probing */
        wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
        async_synchronize_full();
}
EXPORT_SYMBOL_GPL(wait_for_device_probe);

static int __driver_probe_device(const struct device_driver *drv, struct device *dev)
{
        int ret = 0;

        if (dev->p->dead || !device_is_registered(dev))
                return -ENODEV;
        if (dev->driver)
                return -EBUSY;

        dev->can_match = true;
        dev_dbg(dev, "bus: '%s': %s: matched device with driver %s\n",
                drv->bus->name, __func__, drv->name);

        pm_runtime_get_suppliers(dev);
        if (dev->parent)
                pm_runtime_get_sync(dev->parent);

        pm_runtime_barrier(dev);
        if (initcall_debug)
                ret = really_probe_debug(dev, drv);
        else
                ret = really_probe(dev, drv);
        pm_request_idle(dev);

        if (dev->parent)
                pm_runtime_put(dev->parent);

        pm_runtime_put_suppliers(dev);
        return ret;
}

/**
 * driver_probe_device - attempt to bind device & driver together
 * @drv: driver to bind a device to
 * @dev: device to try to bind to the driver
 *
 * This function returns -ENODEV if the device is not registered, -EBUSY if it
 * already has a driver, 0 if the device is bound successfully and a positive
 * (inverted) error code for failures from the ->probe method.
 *
 * This function must be called with @dev lock held.  When called for a
 * USB interface, @dev->parent lock must be held as well.
 *
 * If the device has a parent, runtime-resume the parent before driver probing.
 */
static int driver_probe_device(const struct device_driver *drv, struct device *dev)
{
        int trigger_count = atomic_read(&deferred_trigger_count);
        int ret;

        atomic_inc(&probe_count);
        ret = __driver_probe_device(drv, dev);
        if (ret == -EPROBE_DEFER || ret == EPROBE_DEFER) {
                driver_deferred_probe_add(dev);

                /*
                 * Did a trigger occur while probing? Need to re-trigger if yes
                 */
                if (trigger_count != atomic_read(&deferred_trigger_count) &&
                    !defer_all_probes)
                        driver_deferred_probe_trigger();
        }
        atomic_dec(&probe_count);
        wake_up_all(&probe_waitqueue);
        return ret;
}

static inline bool cmdline_requested_async_probing(const char *drv_name)
{
        bool async_drv;

        async_drv = parse_option_str(async_probe_drv_names, drv_name);

        return (async_probe_default != async_drv);
}

/* The option format is "driver_async_probe=drv_name1,drv_name2,..." */
static int __init save_async_options(char *buf)
{
        if (strlen(buf) >= ASYNC_DRV_NAMES_MAX_LEN)
                pr_warn("Too long list of driver names for 'driver_async_probe'!\n");

        strscpy(async_probe_drv_names, buf, ASYNC_DRV_NAMES_MAX_LEN);
        async_probe_default = parse_option_str(async_probe_drv_names, "*");

        return 1;
}
__setup("driver_async_probe=", save_async_options);

static bool driver_allows_async_probing(const struct device_driver *drv)
{
        switch (drv->probe_type) {
        case PROBE_PREFER_ASYNCHRONOUS:
                return true;

        case PROBE_FORCE_SYNCHRONOUS:
                return false;

        default:
                if (cmdline_requested_async_probing(drv->name))
                        return true;

                if (module_requested_async_probing(drv->owner))
                        return true;

                return false;
        }
}

struct device_attach_data {
        struct device *dev;

        /*
         * Indicates whether we are considering asynchronous probing or
         * not. Only initial binding after device or driver registration
         * (including deferral processing) may be done asynchronously, the
         * rest is always synchronous, as we expect it is being done by
         * request from userspace.
         */
        bool check_async;

        /*
         * Indicates if we are binding synchronous or asynchronous drivers.
         * When asynchronous probing is enabled we'll execute 2 passes
         * over drivers: first pass doing synchronous probing and second
         * doing asynchronous probing (if synchronous did not succeed -
         * most likely because there was no driver requiring synchronous
         * probing - and we found asynchronous driver during first pass).
         * The 2 passes are done because we can't shoot asynchronous
         * probe for given device and driver from bus_for_each_drv() since
         * driver pointer is not guaranteed to stay valid once
         * bus_for_each_drv() iterates to the next driver on the bus.
         */
        bool want_async;

        /*
         * We'll set have_async to 'true' if, while scanning for matching
         * driver, we'll encounter one that requests asynchronous probing.
         */
        bool have_async;
};

static int __device_attach_driver(struct device_driver *drv, void *_data)
{
        struct device_attach_data *data = _data;
        struct device *dev = data->dev;
        bool async_allowed;
        int ret;

        ret = driver_match_device(drv, dev);
        if (ret == 0) {
                /* no match */
                return 0;
        } else if (ret == -EPROBE_DEFER) {
                dev_dbg(dev, "Device match requests probe deferral\n");
                dev->can_match = true;
                driver_deferred_probe_add(dev);
                /*
                 * Device can't match with a driver right now, so don't attempt
                 * to match or bind with other drivers on the bus.
                 */
                return ret;
        } else if (ret < 0) {
                dev_dbg(dev, "Bus failed to match device: %d\n", ret);
                return ret;
        } /* ret > 0 means positive match */

        async_allowed = driver_allows_async_probing(drv);

        if (async_allowed)
                data->have_async = true;

        if (data->check_async && async_allowed != data->want_async)
                return 0;

        /*
         * Ignore errors returned by ->probe so that the next driver can try
         * its luck.
         */
        ret = driver_probe_device(drv, dev);
        if (ret < 0)
                return ret;
        return ret == 0;
}

static void __device_attach_async_helper(void *_dev, async_cookie_t cookie)
{
        struct device *dev = _dev;
        struct device_attach_data data = {
                .dev            = dev,
                .check_async    = true,
                .want_async     = true,
        };

        device_lock(dev);

        /*
         * Check if device has already been removed or claimed. This may
         * happen with driver loading, device discovery/registration,
         * and deferred probe processing happens all at once with
         * multiple threads.
         */
        if (dev->p->dead || dev->driver)
                goto out_unlock;

        if (dev->parent)
                pm_runtime_get_sync(dev->parent);

        bus_for_each_drv(dev->bus, NULL, &data, __device_attach_driver);
        dev_dbg(dev, "async probe completed\n");

        pm_request_idle(dev);

        if (dev->parent)
                pm_runtime_put(dev->parent);
out_unlock:
        device_unlock(dev);

        put_device(dev);
}

static int __device_attach(struct device *dev, bool allow_async)
{
        int ret = 0;
        bool async = false;

        device_lock(dev);
        if (dev->p->dead) {
                goto out_unlock;
        } else if (dev->driver) {
                if (device_is_bound(dev)) {
                        ret = 1;
                        goto out_unlock;
                }
                ret = device_bind_driver(dev);
                if (ret == 0)
                        ret = 1;
                else {
                        device_set_driver(dev, NULL);
                        ret = 0;
                }
        } else {
                struct device_attach_data data = {
                        .dev = dev,
                        .check_async = allow_async,
                        .want_async = false,
                };

                if (dev->parent)
                        pm_runtime_get_sync(dev->parent);

                ret = bus_for_each_drv(dev->bus, NULL, &data,
                                        __device_attach_driver);
                if (!ret && allow_async && data.have_async) {
                        /*
                         * If we could not find appropriate driver
                         * synchronously and we are allowed to do
                         * async probes and there are drivers that
                         * want to probe asynchronously, we'll
                         * try them.
                         */
                        dev_dbg(dev, "scheduling asynchronous probe\n");
                        get_device(dev);
                        async = true;
                } else {
                        pm_request_idle(dev);
                }

                if (dev->parent)
                        pm_runtime_put(dev->parent);
        }
out_unlock:
        device_unlock(dev);
        if (async)
                async_schedule_dev(__device_attach_async_helper, dev);
        return ret;
}

/**
 * device_attach - try to attach device to a driver.
 * @dev: device.
 *
 * Walk the list of drivers that the bus has and call
 * driver_probe_device() for each pair. If a compatible
 * pair is found, break out and return.
 *
 * Returns 1 if the device was bound to a driver;
 * 0 if no matching driver was found;
 * -ENODEV if the device is not registered.
 *
 * When called for a USB interface, @dev->parent lock must be held.
 */
int device_attach(struct device *dev)
{
        return __device_attach(dev, false);
}
EXPORT_SYMBOL_GPL(device_attach);

void device_initial_probe(struct device *dev)
{
        struct subsys_private *sp = bus_to_subsys(dev->bus);

        if (!sp)
                return;

        if (sp->drivers_autoprobe)
                __device_attach(dev, true);

        subsys_put(sp);
}

/*
 * __device_driver_lock - acquire locks needed to manipulate dev->drv
 * @dev: Device we will update driver info for
 * @parent: Parent device. Needed if the bus requires parent lock
 *
 * This function will take the required locks for manipulating dev->drv.
 * Normally this will just be the @dev lock, but when called for a USB
 * interface, @parent lock will be held as well.
 */
static void __device_driver_lock(struct device *dev, struct device *parent)
{
        if (parent && dev->bus->need_parent_lock)
                device_lock(parent);
        device_lock(dev);
}

/*
 * __device_driver_unlock - release locks needed to manipulate dev->drv
 * @dev: Device we will update driver info for
 * @parent: Parent device. Needed if the bus requires parent lock
 *
 * This function will release the required locks for manipulating dev->drv.
 * Normally this will just be the @dev lock, but when called for a
 * USB interface, @parent lock will be released as well.
 */
static void __device_driver_unlock(struct device *dev, struct device *parent)
{
        device_unlock(dev);
        if (parent && dev->bus->need_parent_lock)
                device_unlock(parent);
}

/**
 * device_driver_attach - attach a specific driver to a specific device
 * @drv: Driver to attach
 * @dev: Device to attach it to
 *
 * Manually attach driver to a device. Will acquire both @dev lock and
 * @dev->parent lock if needed. Returns 0 on success, -ERR on failure.
 */
int device_driver_attach(const struct device_driver *drv, struct device *dev)
{
        int ret;

        __device_driver_lock(dev, dev->parent);
        ret = __driver_probe_device(drv, dev);
        __device_driver_unlock(dev, dev->parent);

        /* also return probe errors as normal negative errnos */
        if (ret > 0)
                ret = -ret;
        if (ret == -EPROBE_DEFER)
                return -EAGAIN;
        return ret;
}
EXPORT_SYMBOL_GPL(device_driver_attach);

static void __driver_attach_async_helper(void *_dev, async_cookie_t cookie)
{
        struct device *dev = _dev;
        const struct device_driver *drv;
        int ret;

        __device_driver_lock(dev, dev->parent);
        drv = dev->p->async_driver;
        dev->p->async_driver = NULL;
        ret = driver_probe_device(drv, dev);
        __device_driver_unlock(dev, dev->parent);

        dev_dbg(dev, "driver %s async attach completed: %d\n", drv->name, ret);

        put_device(dev);
}

static int __driver_attach(struct device *dev, void *data)
{
        const struct device_driver *drv = data;
        bool async = false;
        int ret;

        /*
         * Lock device and try to bind to it. We drop the error
         * here and always return 0, because we need to keep trying
         * to bind to devices and some drivers will return an error
         * simply if it didn't support the device.
         *
         * driver_probe_device() will spit a warning if there
         * is an error.
         */

        ret = driver_match_device(drv, dev);
        if (ret == 0) {
                /* no match */
                return 0;
        } else if (ret == -EPROBE_DEFER) {
                dev_dbg(dev, "Device match requests probe deferral\n");
                dev->can_match = true;
                driver_deferred_probe_add(dev);
                /*
                 * Driver could not match with device, but may match with
                 * another device on the bus.
                 */
                return 0;
        } else if (ret < 0) {
                dev_dbg(dev, "Bus failed to match device: %d\n", ret);
                /*
                 * Driver could not match with device, but may match with
                 * another device on the bus.
                 */
                return 0;
        } /* ret > 0 means positive match */

        if (driver_allows_async_probing(drv)) {
                /*
                 * Instead of probing the device synchronously we will
                 * probe it asynchronously to allow for more parallelism.
                 *
                 * We only take the device lock here in order to guarantee
                 * that the dev->driver and async_driver fields are protected
                 */
                dev_dbg(dev, "probing driver %s asynchronously\n", drv->name);
                device_lock(dev);
                if (!dev->driver && !dev->p->async_driver) {
                        get_device(dev);
                        dev->p->async_driver = drv;
                        async = true;
                }
                device_unlock(dev);
                if (async)
                        async_schedule_dev(__driver_attach_async_helper, dev);
                return 0;
        }

        __device_driver_lock(dev, dev->parent);
        driver_probe_device(drv, dev);
        __device_driver_unlock(dev, dev->parent);

        return 0;
}

/**
 * driver_attach - try to bind driver to devices.
 * @drv: driver.
 *
 * Walk the list of devices that the bus has on it and try to
 * match the driver with each one.  If driver_probe_device()
 * returns 0 and the @dev->driver is set, we've found a
 * compatible pair.
 */
int driver_attach(const struct device_driver *drv)
{
        /* The (void *) will be put back to const * in __driver_attach() */
        return bus_for_each_dev(drv->bus, NULL, (void *)drv, __driver_attach);
}
EXPORT_SYMBOL_GPL(driver_attach);

/*
 * __device_release_driver() must be called with @dev lock held.
 * When called for a USB interface, @dev->parent lock must be held as well.
 */
static void __device_release_driver(struct device *dev, struct device *parent)
{
        struct device_driver *drv;

        drv = dev->driver;
        if (drv) {
                pm_runtime_get_sync(dev);

                while (device_links_busy(dev)) {
                        __device_driver_unlock(dev, parent);

                        device_links_unbind_consumers(dev);

                        __device_driver_lock(dev, parent);
                        /*
                         * A concurrent invocation of the same function might
                         * have released the driver successfully while this one
                         * was waiting, so check for that.
                         */
                        if (dev->driver != drv) {
                                pm_runtime_put(dev);
                                return;
                        }
                }

                driver_sysfs_remove(dev);

                bus_notify(dev, BUS_NOTIFY_UNBIND_DRIVER);

                pm_runtime_put_sync(dev);

                device_remove(dev);

                if (dev->bus && dev->bus->dma_cleanup)
                        dev->bus->dma_cleanup(dev);

                device_unbind_cleanup(dev);
                device_links_driver_cleanup(dev);

                klist_remove(&dev->p->knode_driver);
                device_pm_check_callbacks(dev);

                bus_notify(dev, BUS_NOTIFY_UNBOUND_DRIVER);
                kobject_uevent(&dev->kobj, KOBJ_UNBIND);
        }
}

void device_release_driver_internal(struct device *dev,
                                    const struct device_driver *drv,
                                    struct device *parent)
{
        __device_driver_lock(dev, parent);

        if (!drv || drv == dev->driver)
                __device_release_driver(dev, parent);

        __device_driver_unlock(dev, parent);
}

/**
 * device_release_driver - manually detach device from driver.
 * @dev: device.
 *
 * Manually detach device from driver.
 * When called for a USB interface, @dev->parent lock must be held.
 *
 * If this function is to be called with @dev->parent lock held, ensure that
 * the device's consumers are unbound in advance or that their locks can be
 * acquired under the @dev->parent lock.
 */
void device_release_driver(struct device *dev)
{
        /*
         * If anyone calls device_release_driver() recursively from
         * within their ->remove callback for the same device, they
         * will deadlock right here.
         */
        device_release_driver_internal(dev, NULL, NULL);
}
EXPORT_SYMBOL_GPL(device_release_driver);

/**
 * device_driver_detach - detach driver from a specific device
 * @dev: device to detach driver from
 *
 * Detach driver from device. Will acquire both @dev lock and @dev->parent
 * lock if needed.
 */
void device_driver_detach(struct device *dev)
{
        device_release_driver_internal(dev, NULL, dev->parent);
}

/**
 * driver_detach - detach driver from all devices it controls.
 * @drv: driver.
 */
void driver_detach(const struct device_driver *drv)
{
        struct device_private *dev_prv;
        struct device *dev;

        if (driver_allows_async_probing(drv))
                async_synchronize_full();

        for (;;) {
                spin_lock(&drv->p->klist_devices.k_lock);
                if (list_empty(&drv->p->klist_devices.k_list)) {
                        spin_unlock(&drv->p->klist_devices.k_lock);
                        break;
                }
                dev_prv = list_last_entry(&drv->p->klist_devices.k_list,
                                     struct device_private,
                                     knode_driver.n_node);
                dev = dev_prv->device;
                get_device(dev);
                spin_unlock(&drv->p->klist_devices.k_lock);
                device_release_driver_internal(dev, drv, dev->parent);
                put_device(dev);
        }
}