device_property_read_string
EXPORT_SYMBOL_GPL(device_property_read_string);
!device_property_read_string(&nxpdev->serdev->dev,
if (device_property_read_string(pdev, "firmware-name",
ret = device_property_read_string(dev, "clock-output-names", &clk_name);
err = device_property_read_string(dev, "label", &label);
rv = device_property_read_string(dev, "chip-label", &name);
ret = device_property_read_string(dev, "format", &format_name);
if (!device_property_read_string(dev, "pervasive,thermal-zone",
if (device_property_read_string(dev, "sharp,vcom-mode", &vcom_mode_str))
rv = device_property_read_string(devc, "firmware-name", &val);
ret = device_property_read_string(&client->dev, propname, &function);
ret = device_property_read_string(&client->dev, propname, &function);
err = device_property_read_string(dev, "label", &label);
device_property_read_string(dev, "label", &data->label);
ret = device_property_read_string(dev, "adi,gpio1-mode", &func);
ret = device_property_read_string(dev, "adi,gpio2-mode", &func);
ret = device_property_read_string(dev, "adi,overvoltage-dividers",
ret = device_property_read_string(dev, "adi,undervoltage-dividers",
device_property_read_string(dev, "label", &tmp102->label);
int ret = device_property_read_string(&client->dev, "firmware-name", &eeprom_data);
if (device_property_read_string(dev, "clock-output-names", &init.name)) {
if (device_property_read_string(st->dev, "dma-names", &dma_name))
ret = device_property_read_string(dev, "xlnx,external-mux", &external_mux);
if (device_property_read_string(st->dev, "dma-names", &dma_name))
if (device_property_read_string(&spi->dev, "clock-output-names", &init.name)) {
ret = device_property_read_string(dev, "clock-output-names", &init.name);
if (device_property_read_string(dev, "adi,ext-clk-pin", &ext_clk_pin))
ret = device_property_read_string(dev, "compatible", &compat);
ret = device_property_read_string(dev, "honeywell,pressure-triplet",
ret = device_property_read_string(dev, "honeywell,pressure-triplet",
ret = device_property_read_string(dev, "honeywell,pressure-triplet",
device_property_read_string(dev, "firmware-name", &fw_name);
ret = device_property_read_string(dev, "semtech,resolution", &res);
ret = device_property_read_string(dev, "adi,fixed-mode", &str_val);
device_property_read_string(dev, "label", &pdata->name);
device_property_read_string(dev, "label", &pdata->name);
error = device_property_read_string(dev, "dlg,actuator-type", &str);
error = device_property_read_string(dev, gpi_str2, &str);
error = device_property_read_string(dev, gpi_str3, &str);
error = device_property_read_string(dev, "firmware-name", &z2->fw_name);
error = device_property_read_string(&client->dev,
device_property_read_string(&ts->client->dev,
error = device_property_read_string(dev, "firmware-name", &str);
err = device_property_read_string(&pdev->dev, "label", &led->led.name);
ret = device_property_read_string(dev, label, &str);
device_property_read_string(dev, "allwinner,pixel-format", &format);
if (device_property_read_string(dev, "cix,mbox-dir", &dir_str)) {
device_property_read_string(dev, "clock-output-names", &mclk_name);
device_property_read_string(&client->dev, "firmware-name", &fw_name);
err = device_property_read_string(dev, "label",
if (!device_property_read_string(dev, "marvell,xenon-phy-type", &phy_type))
if (!device_property_read_string(&pdev->dev,
ret = device_property_read_string(dev, XGBE_PHY_MODE_PROPERTY,
ret = device_property_read_string(dsaf_dev->dev, "mode", &mode_str);
device_property_read_string(dev, "adi,phy-output-clock", &val);
ret = device_property_read_string(dev, "firmware-name", &fw_name);
if (!device_property_read_string(dev, "ti,rmii-mode", &of_val)) {
if (!device_property_read_string(dev, "ti,gpio2-clk-out", &of_val)) {
ret = device_property_read_string(bq->dev, "linux,secondary-charger-name", &str);
if (!device_property_read_string(dev, "charger-type", &chargetype)) {
device_property_read_string(dev, "firmware-name", &fw_name);
if (device_property_read_string(dev, "adi,tc-diode", &diode))
ret = device_property_read_string(se->wrapper->dev, "firmware-name", &fw_name);
ret = device_property_read_string(dev, prop_name, &prop_val);
device_property_read_string(dev, "gamma", (const char **)&pdata->gamma);
if (device_property_read_string(dev, "method", &method)) {
if (!device_property_read_string(dev, "transceiver", &portmode)) {
if (!device_property_read_string(&pdev->dev, "linux,uio-name", &name))
ret = device_property_read_string(dev, "maximum-speed", &maximum_speed);
err = device_property_read_string(dev, "dr_mode", &dr_mode);
ret = device_property_read_string(dev, "role-switch-default-mode", &str);
device_property_read_string(hsotg->dev, "dr_mode", &dr_mode);
device_property_read_string(dev, "snps,hsphy_interface",
if (device_property_read_string(dev, "linux,extcon-name", &name) == 0)
ret = device_property_read_string(dwc->dev, "usb-psy-name", &usb_psy_name);
if (device_property_read_string(dev, "linux,extcon-name", &name) == 0) {
ret = device_property_read_string(tps->dev, "firmware-name",
status = device_property_read_string(dev, "firmware-name", &fw_name);
ret = device_property_read_string(g0->dev, "firmware-name", &g0->fw_name);
ret = device_property_read_string(dev, "compatible",
ret = device_property_read_string(dev, "hw_algo", &algo);
int device_property_read_string(const struct device *dev, const char *propname,
device_property_read_string(&pdev->dev, name_property, &rfkill->name);
device_property_read_string(&pdev->dev, type_property, &type_name);
if (device_property_read_string(aw88166->aw_pa->dev, "firmware-name", &fw_name) < 0)
ret = device_property_read_string(aw88261->aw_pa->dev, "firmware-name", &fw_name);
if (!device_property_read_string(cs35l41->dev, "cirrus,subsystem-id", &tmp)) {
ret = device_property_read_string(dev, "cirrus,firmware-uid", &prop);
if (!device_property_read_string(dev, "dlg,dmic-data-sel", &fw_str))
if (!device_property_read_string(dev, "dlg,dmic-samplephase", &fw_str))
if (!device_property_read_string(dev, "dlg,mic-amp-in-sel", &of_str))
ret = device_property_read_string(&i2c->dev, "maxim,dsm_param_name",
device_property_read_string(dev, "realtek,dspfw-name",
device_property_read_string(dev, "realtek,dsp-calib-clk-name",
if (device_property_read_string(dev, "ti,dsp-config-name",
ret = device_property_read_string(dev, propname, &str);
device_property_read_string(card->dev, "codec-dai-name", &codec_dai_name);
ret = device_property_read_string(dev, "model", &card->name);