root/drivers/scsi/hpsa.c
/*
 *    Disk Array driver for HP Smart Array SAS controllers
 *    Copyright (c) 2019-2020 Microchip Technology Inc. and its subsidiaries
 *    Copyright 2016 Microsemi Corporation
 *    Copyright 2014-2015 PMC-Sierra, Inc.
 *    Copyright 2000,2009-2015 Hewlett-Packard Development Company, L.P.
 *
 *    This program is free software; you can redistribute it and/or modify
 *    it under the terms of the GNU General Public License as published by
 *    the Free Software Foundation; version 2 of the License.
 *
 *    This program is distributed in the hope that it will be useful,
 *    but WITHOUT ANY WARRANTY; without even the implied warranty of
 *    MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
 *    NON INFRINGEMENT.  See the GNU General Public License for more details.
 *
 *    Questions/Comments/Bugfixes to esc.storagedev@microsemi.com
 *
 */

#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/types.h>
#include <linux/pci.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fs.h>
#include <linux/timer.h>
#include <linux/init.h>
#include <linux/spinlock.h>
#include <linux/compat.h>
#include <linux/blktrace_api.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/dma-mapping.h>
#include <linux/completion.h>
#include <linux/moduleparam.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_device.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_transport_sas.h>
#include <scsi/scsi_dbg.h>
#include <linux/cciss_ioctl.h>
#include <linux/string.h>
#include <linux/bitmap.h>
#include <linux/atomic.h>
#include <linux/jiffies.h>
#include <linux/percpu-defs.h>
#include <linux/percpu.h>
#include <linux/unaligned.h>
#include <asm/div64.h>
#include "hpsa_cmd.h"
#include "hpsa.h"

/*
 * HPSA_DRIVER_VERSION must be 3 byte values (0-255) separated by '.'
 * with an optional trailing '-' followed by a byte value (0-255).
 */
#define HPSA_DRIVER_VERSION "3.4.20-200"
#define DRIVER_NAME "HP HPSA Driver (v " HPSA_DRIVER_VERSION ")"
#define HPSA "hpsa"

/* How long to wait for CISS doorbell communication */
#define CLEAR_EVENT_WAIT_INTERVAL 20    /* ms for each msleep() call */
#define MODE_CHANGE_WAIT_INTERVAL 10    /* ms for each msleep() call */
#define MAX_CLEAR_EVENT_WAIT 30000      /* times 20 ms = 600 s */
#define MAX_MODE_CHANGE_WAIT 2000       /* times 10 ms = 20 s */
#define MAX_IOCTL_CONFIG_WAIT 1000

/*define how many times we will try a command because of bus resets */
#define MAX_CMD_RETRIES 3
/* How long to wait before giving up on a command */
#define HPSA_EH_PTRAID_TIMEOUT (240 * HZ)

/* Embedded module documentation macros - see modules.h */
MODULE_AUTHOR("Hewlett-Packard Company");
MODULE_DESCRIPTION("Driver for HP Smart Array Controller version " \
        HPSA_DRIVER_VERSION);
MODULE_VERSION(HPSA_DRIVER_VERSION);
MODULE_LICENSE("GPL");
MODULE_ALIAS("cciss");

static int hpsa_simple_mode;
module_param(hpsa_simple_mode, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(hpsa_simple_mode,
        "Use 'simple mode' rather than 'performant mode'");

/* define the PCI info for the cards we can control */
static const struct pci_device_id hpsa_pci_device_id[] = {
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3241},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3243},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3245},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3247},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3249},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x324A},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x324B},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSE,     0x103C, 0x3233},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3350},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3351},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3352},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3353},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3354},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3355},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSF,     0x103C, 0x3356},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103c, 0x1920},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1921},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1922},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1923},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1924},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103c, 0x1925},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1926},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1928},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSH,     0x103C, 0x1929},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21BD},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21BE},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21BF},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21C0},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21C1},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21C2},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21C3},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21C4},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21C5},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21C6},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21C7},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21C8},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21C9},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21CA},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21CB},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21CC},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21CD},
        {PCI_VENDOR_ID_HP,     PCI_DEVICE_ID_HP_CISSI,     0x103C, 0x21CE},
        {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0580},
        {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0581},
        {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0582},
        {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0583},
        {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0584},
        {PCI_VENDOR_ID_ADAPTEC2, 0x0290, 0x9005, 0x0585},
        {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x0076},
        {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x0087},
        {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x007D},
        {PCI_VENDOR_ID_HP_3PAR, 0x0075, 0x1590, 0x0088},
        {PCI_VENDOR_ID_HP, 0x333f, 0x103c, 0x333f},
        {PCI_VENDOR_ID_HP,     PCI_ANY_ID,      PCI_ANY_ID, PCI_ANY_ID,
                PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
        {PCI_VENDOR_ID_COMPAQ,     PCI_ANY_ID,  PCI_ANY_ID, PCI_ANY_ID,
                PCI_CLASS_STORAGE_RAID << 8, 0xffff << 8, 0},
        {0,}
};

MODULE_DEVICE_TABLE(pci, hpsa_pci_device_id);

/*  board_id = Subsystem Device ID & Vendor ID
 *  product = Marketing Name for the board
 *  access = Address of the struct of function pointers
 */
static struct board_type products[] = {
        {0x40700E11, "Smart Array 5300", &SA5A_access},
        {0x40800E11, "Smart Array 5i", &SA5B_access},
        {0x40820E11, "Smart Array 532", &SA5B_access},
        {0x40830E11, "Smart Array 5312", &SA5B_access},
        {0x409A0E11, "Smart Array 641", &SA5A_access},
        {0x409B0E11, "Smart Array 642", &SA5A_access},
        {0x409C0E11, "Smart Array 6400", &SA5A_access},
        {0x409D0E11, "Smart Array 6400 EM", &SA5A_access},
        {0x40910E11, "Smart Array 6i", &SA5A_access},
        {0x3225103C, "Smart Array P600", &SA5A_access},
        {0x3223103C, "Smart Array P800", &SA5A_access},
        {0x3234103C, "Smart Array P400", &SA5A_access},
        {0x3235103C, "Smart Array P400i", &SA5A_access},
        {0x3211103C, "Smart Array E200i", &SA5A_access},
        {0x3212103C, "Smart Array E200", &SA5A_access},
        {0x3213103C, "Smart Array E200i", &SA5A_access},
        {0x3214103C, "Smart Array E200i", &SA5A_access},
        {0x3215103C, "Smart Array E200i", &SA5A_access},
        {0x3237103C, "Smart Array E500", &SA5A_access},
        {0x323D103C, "Smart Array P700m", &SA5A_access},
        {0x3241103C, "Smart Array P212", &SA5_access},
        {0x3243103C, "Smart Array P410", &SA5_access},
        {0x3245103C, "Smart Array P410i", &SA5_access},
        {0x3247103C, "Smart Array P411", &SA5_access},
        {0x3249103C, "Smart Array P812", &SA5_access},
        {0x324A103C, "Smart Array P712m", &SA5_access},
        {0x324B103C, "Smart Array P711m", &SA5_access},
        {0x3233103C, "HP StorageWorks 1210m", &SA5_access}, /* alias of 333f */
        {0x3350103C, "Smart Array P222", &SA5_access},
        {0x3351103C, "Smart Array P420", &SA5_access},
        {0x3352103C, "Smart Array P421", &SA5_access},
        {0x3353103C, "Smart Array P822", &SA5_access},
        {0x3354103C, "Smart Array P420i", &SA5_access},
        {0x3355103C, "Smart Array P220i", &SA5_access},
        {0x3356103C, "Smart Array P721m", &SA5_access},
        {0x1920103C, "Smart Array P430i", &SA5_access},
        {0x1921103C, "Smart Array P830i", &SA5_access},
        {0x1922103C, "Smart Array P430", &SA5_access},
        {0x1923103C, "Smart Array P431", &SA5_access},
        {0x1924103C, "Smart Array P830", &SA5_access},
        {0x1925103C, "Smart Array P831", &SA5_access},
        {0x1926103C, "Smart Array P731m", &SA5_access},
        {0x1928103C, "Smart Array P230i", &SA5_access},
        {0x1929103C, "Smart Array P530", &SA5_access},
        {0x21BD103C, "Smart Array P244br", &SA5_access},
        {0x21BE103C, "Smart Array P741m", &SA5_access},
        {0x21BF103C, "Smart HBA H240ar", &SA5_access},
        {0x21C0103C, "Smart Array P440ar", &SA5_access},
        {0x21C1103C, "Smart Array P840ar", &SA5_access},
        {0x21C2103C, "Smart Array P440", &SA5_access},
        {0x21C3103C, "Smart Array P441", &SA5_access},
        {0x21C4103C, "Smart Array", &SA5_access},
        {0x21C5103C, "Smart Array P841", &SA5_access},
        {0x21C6103C, "Smart HBA H244br", &SA5_access},
        {0x21C7103C, "Smart HBA H240", &SA5_access},
        {0x21C8103C, "Smart HBA H241", &SA5_access},
        {0x21C9103C, "Smart Array", &SA5_access},
        {0x21CA103C, "Smart Array P246br", &SA5_access},
        {0x21CB103C, "Smart Array P840", &SA5_access},
        {0x21CC103C, "Smart Array", &SA5_access},
        {0x21CD103C, "Smart Array", &SA5_access},
        {0x21CE103C, "Smart HBA", &SA5_access},
        {0x05809005, "SmartHBA-SA", &SA5_access},
        {0x05819005, "SmartHBA-SA 8i", &SA5_access},
        {0x05829005, "SmartHBA-SA 8i8e", &SA5_access},
        {0x05839005, "SmartHBA-SA 8e", &SA5_access},
        {0x05849005, "SmartHBA-SA 16i", &SA5_access},
        {0x05859005, "SmartHBA-SA 4i4e", &SA5_access},
        {0x00761590, "HP Storage P1224 Array Controller", &SA5_access},
        {0x00871590, "HP Storage P1224e Array Controller", &SA5_access},
        {0x007D1590, "HP Storage P1228 Array Controller", &SA5_access},
        {0x00881590, "HP Storage P1228e Array Controller", &SA5_access},
        {0x333f103c, "HP StorageWorks 1210m Array Controller", &SA5_access},
        {0xFFFF103C, "Unknown Smart Array", &SA5_access},
};

static struct scsi_transport_template *hpsa_sas_transport_template;
static int hpsa_add_sas_host(struct ctlr_info *h);
static void hpsa_delete_sas_host(struct ctlr_info *h);
static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node,
                        struct hpsa_scsi_dev_t *device);
static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device);
static struct hpsa_scsi_dev_t
        *hpsa_find_device_by_sas_rphy(struct ctlr_info *h,
                struct sas_rphy *rphy);

#define SCSI_CMD_BUSY ((struct scsi_cmnd *)&hpsa_cmd_busy)
static const struct scsi_cmnd hpsa_cmd_busy;
#define SCSI_CMD_IDLE ((struct scsi_cmnd *)&hpsa_cmd_idle)
static const struct scsi_cmnd hpsa_cmd_idle;
static int number_of_controllers;

static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id);
static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id);
static int hpsa_ioctl(struct scsi_device *dev, unsigned int cmd,
                      void __user *arg);
static int hpsa_passthru_ioctl(struct ctlr_info *h,
                               IOCTL_Command_struct *iocommand);
static int hpsa_big_passthru_ioctl(struct ctlr_info *h,
                                   BIG_IOCTL_Command_struct *ioc);

#ifdef CONFIG_COMPAT
static int hpsa_compat_ioctl(struct scsi_device *dev, unsigned int cmd,
        void __user *arg);
#endif

static void cmd_free(struct ctlr_info *h, struct CommandList *c);
static struct CommandList *cmd_alloc(struct ctlr_info *h);
static void cmd_tagged_free(struct ctlr_info *h, struct CommandList *c);
static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h,
                                            struct scsi_cmnd *scmd);
static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
        void *buff, size_t size, u16 page_code, unsigned char *scsi3addr,
        int cmd_type);
static void hpsa_free_cmd_pool(struct ctlr_info *h);
#define VPD_PAGE (1 << 8)
#define HPSA_SIMPLE_ERROR_BITS 0x03

static enum scsi_qc_status hpsa_scsi_queue_command(struct Scsi_Host *h,
                                                   struct scsi_cmnd *cmd);
static void hpsa_scan_start(struct Scsi_Host *);
static int hpsa_scan_finished(struct Scsi_Host *sh,
        unsigned long elapsed_time);
static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth);

static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
static int hpsa_sdev_init(struct scsi_device *sdev);
static int hpsa_sdev_configure(struct scsi_device *sdev,
                               struct queue_limits *lim);
static void hpsa_sdev_destroy(struct scsi_device *sdev);

static void hpsa_update_scsi_devices(struct ctlr_info *h);
static int check_for_unit_attention(struct ctlr_info *h,
        struct CommandList *c);
static void check_ioctl_unit_attention(struct ctlr_info *h,
        struct CommandList *c);
/* performant mode helper functions */
static void calc_bucket_map(int *bucket, int num_buckets,
        int nsgs, int min_blocks, u32 *bucket_map);
static void hpsa_free_performant_mode(struct ctlr_info *h);
static int hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h);
static inline u32 next_command(struct ctlr_info *h, u8 q);
static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
                               u32 *cfg_base_addr, u64 *cfg_base_addr_index,
                               u64 *cfg_offset);
static int hpsa_pci_find_memory_BAR(struct pci_dev *pdev,
                                    unsigned long *memory_bar);
static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id,
                                bool *legacy_board);
static int wait_for_device_to_become_ready(struct ctlr_info *h,
                                           unsigned char lunaddr[],
                                           int reply_queue);
static int hpsa_wait_for_board_state(struct pci_dev *pdev, void __iomem *vaddr,
                                     int wait_for_ready);
static inline void finish_cmd(struct CommandList *c);
static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h);
#define BOARD_NOT_READY 0
#define BOARD_READY 1
static void hpsa_drain_accel_commands(struct ctlr_info *h);
static void hpsa_flush_cache(struct ctlr_info *h);
static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
        struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
        u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk);
static void hpsa_command_resubmit_worker(struct work_struct *work);
static u32 lockup_detected(struct ctlr_info *h);
static int detect_controller_lockup(struct ctlr_info *h);
static void hpsa_disable_rld_caching(struct ctlr_info *h);
static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h,
        struct ReportExtendedLUNdata *buf, int bufsize);
static bool hpsa_vpd_page_supported(struct ctlr_info *h,
        unsigned char scsi3addr[], u8 page);
static int hpsa_luns_changed(struct ctlr_info *h);
static bool hpsa_cmd_dev_match(struct ctlr_info *h, struct CommandList *c,
                               struct hpsa_scsi_dev_t *dev,
                               unsigned char *scsi3addr);

static inline struct ctlr_info *sdev_to_hba(struct scsi_device *sdev)
{
        unsigned long *priv = shost_priv(sdev->host);
        return (struct ctlr_info *) *priv;
}

static inline struct ctlr_info *shost_to_hba(struct Scsi_Host *sh)
{
        unsigned long *priv = shost_priv(sh);
        return (struct ctlr_info *) *priv;
}

static inline bool hpsa_is_cmd_idle(struct CommandList *c)
{
        return c->scsi_cmd == SCSI_CMD_IDLE;
}

/* extract sense key, asc, and ascq from sense data.  -1 means invalid. */
static void decode_sense_data(const u8 *sense_data, int sense_data_len,
                        u8 *sense_key, u8 *asc, u8 *ascq)
{
        struct scsi_sense_hdr sshdr;
        bool rc;

        *sense_key = -1;
        *asc = -1;
        *ascq = -1;

        if (sense_data_len < 1)
                return;

        rc = scsi_normalize_sense(sense_data, sense_data_len, &sshdr);
        if (rc) {
                *sense_key = sshdr.sense_key;
                *asc = sshdr.asc;
                *ascq = sshdr.ascq;
        }
}

static int check_for_unit_attention(struct ctlr_info *h,
        struct CommandList *c)
{
        u8 sense_key, asc, ascq;
        int sense_len;

        if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo))
                sense_len = sizeof(c->err_info->SenseInfo);
        else
                sense_len = c->err_info->SenseLen;

        decode_sense_data(c->err_info->SenseInfo, sense_len,
                                &sense_key, &asc, &ascq);
        if (sense_key != UNIT_ATTENTION || asc == 0xff)
                return 0;

        switch (asc) {
        case STATE_CHANGED:
                dev_warn(&h->pdev->dev,
                        "%s: a state change detected, command retried\n",
                        h->devname);
                break;
        case LUN_FAILED:
                dev_warn(&h->pdev->dev,
                        "%s: LUN failure detected\n", h->devname);
                break;
        case REPORT_LUNS_CHANGED:
                dev_warn(&h->pdev->dev,
                        "%s: report LUN data changed\n", h->devname);
        /*
         * Note: this REPORT_LUNS_CHANGED condition only occurs on the external
         * target (array) devices.
         */
                break;
        case POWER_OR_RESET:
                dev_warn(&h->pdev->dev,
                        "%s: a power on or device reset detected\n",
                        h->devname);
                break;
        case UNIT_ATTENTION_CLEARED:
                dev_warn(&h->pdev->dev,
                        "%s: unit attention cleared by another initiator\n",
                        h->devname);
                break;
        default:
                dev_warn(&h->pdev->dev,
                        "%s: unknown unit attention detected\n",
                        h->devname);
                break;
        }
        return 1;
}

static int check_for_busy(struct ctlr_info *h, struct CommandList *c)
{
        if (c->err_info->CommandStatus != CMD_TARGET_STATUS ||
                (c->err_info->ScsiStatus != SAM_STAT_BUSY &&
                 c->err_info->ScsiStatus != SAM_STAT_TASK_SET_FULL))
                return 0;
        dev_warn(&h->pdev->dev, HPSA "device busy");
        return 1;
}

static u32 lockup_detected(struct ctlr_info *h);
static ssize_t host_show_lockup_detected(struct device *dev,
                struct device_attribute *attr, char *buf)
{
        int ld;
        struct ctlr_info *h;
        struct Scsi_Host *shost = class_to_shost(dev);

        h = shost_to_hba(shost);
        ld = lockup_detected(h);

        return sprintf(buf, "ld=%d\n", ld);
}

static ssize_t host_store_hp_ssd_smart_path_status(struct device *dev,
                                         struct device_attribute *attr,
                                         const char *buf, size_t count)
{
        int status;
        struct ctlr_info *h;
        struct Scsi_Host *shost = class_to_shost(dev);

        if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
                return -EACCES;
        if (kstrtoint(buf, 10, &status))
                return -EINVAL;
        h = shost_to_hba(shost);
        h->acciopath_status = !!status;
        dev_warn(&h->pdev->dev,
                "hpsa: HP SSD Smart Path %s via sysfs update.\n",
                h->acciopath_status ? "enabled" : "disabled");
        return count;
}

static ssize_t host_store_raid_offload_debug(struct device *dev,
                                         struct device_attribute *attr,
                                         const char *buf, size_t count)
{
        int debug_level;
        struct ctlr_info *h;
        struct Scsi_Host *shost = class_to_shost(dev);

        if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
                return -EACCES;
        if (kstrtoint(buf, 10, &debug_level))
                return -EINVAL;
        if (debug_level < 0)
                debug_level = 0;
        h = shost_to_hba(shost);
        h->raid_offload_debug = debug_level;
        dev_warn(&h->pdev->dev, "hpsa: Set raid_offload_debug level = %d\n",
                h->raid_offload_debug);
        return count;
}

static ssize_t host_store_rescan(struct device *dev,
                                 struct device_attribute *attr,
                                 const char *buf, size_t count)
{
        struct ctlr_info *h;
        struct Scsi_Host *shost = class_to_shost(dev);
        h = shost_to_hba(shost);
        hpsa_scan_start(h->scsi_host);
        return count;
}

static void hpsa_turn_off_ioaccel_for_device(struct hpsa_scsi_dev_t *device)
{
        device->offload_enabled = 0;
        device->offload_to_be_enabled = 0;
}

static ssize_t host_show_firmware_revision(struct device *dev,
             struct device_attribute *attr, char *buf)
{
        struct ctlr_info *h;
        struct Scsi_Host *shost = class_to_shost(dev);
        unsigned char *fwrev;

        h = shost_to_hba(shost);
        if (!h->hba_inquiry_data)
                return 0;
        fwrev = &h->hba_inquiry_data[32];
        return snprintf(buf, 20, "%c%c%c%c\n",
                fwrev[0], fwrev[1], fwrev[2], fwrev[3]);
}

static ssize_t host_show_commands_outstanding(struct device *dev,
             struct device_attribute *attr, char *buf)
{
        struct Scsi_Host *shost = class_to_shost(dev);
        struct ctlr_info *h = shost_to_hba(shost);

        return snprintf(buf, 20, "%d\n",
                        atomic_read(&h->commands_outstanding));
}

static ssize_t host_show_transport_mode(struct device *dev,
        struct device_attribute *attr, char *buf)
{
        struct ctlr_info *h;
        struct Scsi_Host *shost = class_to_shost(dev);

        h = shost_to_hba(shost);
        return snprintf(buf, 20, "%s\n",
                h->transMethod & CFGTBL_Trans_Performant ?
                        "performant" : "simple");
}

static ssize_t host_show_hp_ssd_smart_path_status(struct device *dev,
        struct device_attribute *attr, char *buf)
{
        struct ctlr_info *h;
        struct Scsi_Host *shost = class_to_shost(dev);

        h = shost_to_hba(shost);
        return snprintf(buf, 30, "HP SSD Smart Path %s\n",
                (h->acciopath_status == 1) ?  "enabled" : "disabled");
}

/* List of controllers which cannot be hard reset on kexec with reset_devices */
static u32 unresettable_controller[] = {
        0x324a103C, /* Smart Array P712m */
        0x324b103C, /* Smart Array P711m */
        0x3223103C, /* Smart Array P800 */
        0x3234103C, /* Smart Array P400 */
        0x3235103C, /* Smart Array P400i */
        0x3211103C, /* Smart Array E200i */
        0x3212103C, /* Smart Array E200 */
        0x3213103C, /* Smart Array E200i */
        0x3214103C, /* Smart Array E200i */
        0x3215103C, /* Smart Array E200i */
        0x3237103C, /* Smart Array E500 */
        0x323D103C, /* Smart Array P700m */
        0x40800E11, /* Smart Array 5i */
        0x409C0E11, /* Smart Array 6400 */
        0x409D0E11, /* Smart Array 6400 EM */
        0x40700E11, /* Smart Array 5300 */
        0x40820E11, /* Smart Array 532 */
        0x40830E11, /* Smart Array 5312 */
        0x409A0E11, /* Smart Array 641 */
        0x409B0E11, /* Smart Array 642 */
        0x40910E11, /* Smart Array 6i */
};

/* List of controllers which cannot even be soft reset */
static u32 soft_unresettable_controller[] = {
        0x40800E11, /* Smart Array 5i */
        0x40700E11, /* Smart Array 5300 */
        0x40820E11, /* Smart Array 532 */
        0x40830E11, /* Smart Array 5312 */
        0x409A0E11, /* Smart Array 641 */
        0x409B0E11, /* Smart Array 642 */
        0x40910E11, /* Smart Array 6i */
        /* Exclude 640x boards.  These are two pci devices in one slot
         * which share a battery backed cache module.  One controls the
         * cache, the other accesses the cache through the one that controls
         * it.  If we reset the one controlling the cache, the other will
         * likely not be happy.  Just forbid resetting this conjoined mess.
         * The 640x isn't really supported by hpsa anyway.
         */
        0x409C0E11, /* Smart Array 6400 */
        0x409D0E11, /* Smart Array 6400 EM */
};

static int board_id_in_array(u32 a[], int nelems, u32 board_id)
{
        int i;

        for (i = 0; i < nelems; i++)
                if (a[i] == board_id)
                        return 1;
        return 0;
}

static int ctlr_is_hard_resettable(u32 board_id)
{
        return !board_id_in_array(unresettable_controller,
                        ARRAY_SIZE(unresettable_controller), board_id);
}

static int ctlr_is_soft_resettable(u32 board_id)
{
        return !board_id_in_array(soft_unresettable_controller,
                        ARRAY_SIZE(soft_unresettable_controller), board_id);
}

static int ctlr_is_resettable(u32 board_id)
{
        return ctlr_is_hard_resettable(board_id) ||
                ctlr_is_soft_resettable(board_id);
}

static ssize_t host_show_resettable(struct device *dev,
        struct device_attribute *attr, char *buf)
{
        struct ctlr_info *h;
        struct Scsi_Host *shost = class_to_shost(dev);

        h = shost_to_hba(shost);
        return snprintf(buf, 20, "%d\n", ctlr_is_resettable(h->board_id));
}

static inline int is_logical_dev_addr_mode(unsigned char scsi3addr[])
{
        return (scsi3addr[3] & 0xC0) == 0x40;
}

static const char * const raid_label[] = { "0", "4", "1(+0)", "5", "5+1", "6",
        "1(+0)ADM", "UNKNOWN", "PHYS DRV"
};
#define HPSA_RAID_0     0
#define HPSA_RAID_4     1
#define HPSA_RAID_1     2       /* also used for RAID 10 */
#define HPSA_RAID_5     3       /* also used for RAID 50 */
#define HPSA_RAID_51    4
#define HPSA_RAID_6     5       /* also used for RAID 60 */
#define HPSA_RAID_ADM   6       /* also used for RAID 1+0 ADM */
#define RAID_UNKNOWN (ARRAY_SIZE(raid_label) - 2)
#define PHYSICAL_DRIVE (ARRAY_SIZE(raid_label) - 1)

static inline bool is_logical_device(struct hpsa_scsi_dev_t *device)
{
        return !device->physical_device;
}

static ssize_t raid_level_show(struct device *dev,
             struct device_attribute *attr, char *buf)
{
        ssize_t l = 0;
        unsigned char rlevel;
        struct ctlr_info *h;
        struct scsi_device *sdev;
        struct hpsa_scsi_dev_t *hdev;
        unsigned long flags;

        sdev = to_scsi_device(dev);
        h = sdev_to_hba(sdev);
        spin_lock_irqsave(&h->lock, flags);
        hdev = sdev->hostdata;
        if (!hdev) {
                spin_unlock_irqrestore(&h->lock, flags);
                return -ENODEV;
        }

        /* Is this even a logical drive? */
        if (!is_logical_device(hdev)) {
                spin_unlock_irqrestore(&h->lock, flags);
                l = snprintf(buf, PAGE_SIZE, "N/A\n");
                return l;
        }

        rlevel = hdev->raid_level;
        spin_unlock_irqrestore(&h->lock, flags);
        if (rlevel > RAID_UNKNOWN)
                rlevel = RAID_UNKNOWN;
        l = snprintf(buf, PAGE_SIZE, "RAID %s\n", raid_label[rlevel]);
        return l;
}

static ssize_t lunid_show(struct device *dev,
             struct device_attribute *attr, char *buf)
{
        struct ctlr_info *h;
        struct scsi_device *sdev;
        struct hpsa_scsi_dev_t *hdev;
        unsigned long flags;
        unsigned char lunid[8];

        sdev = to_scsi_device(dev);
        h = sdev_to_hba(sdev);
        spin_lock_irqsave(&h->lock, flags);
        hdev = sdev->hostdata;
        if (!hdev) {
                spin_unlock_irqrestore(&h->lock, flags);
                return -ENODEV;
        }
        memcpy(lunid, hdev->scsi3addr, sizeof(lunid));
        spin_unlock_irqrestore(&h->lock, flags);
        return snprintf(buf, 20, "0x%8phN\n", lunid);
}

static ssize_t unique_id_show(struct device *dev,
             struct device_attribute *attr, char *buf)
{
        struct ctlr_info *h;
        struct scsi_device *sdev;
        struct hpsa_scsi_dev_t *hdev;
        unsigned long flags;
        unsigned char sn[16];

        sdev = to_scsi_device(dev);
        h = sdev_to_hba(sdev);
        spin_lock_irqsave(&h->lock, flags);
        hdev = sdev->hostdata;
        if (!hdev) {
                spin_unlock_irqrestore(&h->lock, flags);
                return -ENODEV;
        }
        memcpy(sn, hdev->device_id, sizeof(sn));
        spin_unlock_irqrestore(&h->lock, flags);
        return snprintf(buf, 16 * 2 + 2,
                        "%02X%02X%02X%02X%02X%02X%02X%02X"
                        "%02X%02X%02X%02X%02X%02X%02X%02X\n",
                        sn[0], sn[1], sn[2], sn[3],
                        sn[4], sn[5], sn[6], sn[7],
                        sn[8], sn[9], sn[10], sn[11],
                        sn[12], sn[13], sn[14], sn[15]);
}

static ssize_t sas_address_show(struct device *dev,
              struct device_attribute *attr, char *buf)
{
        struct ctlr_info *h;
        struct scsi_device *sdev;
        struct hpsa_scsi_dev_t *hdev;
        unsigned long flags;
        u64 sas_address;

        sdev = to_scsi_device(dev);
        h = sdev_to_hba(sdev);
        spin_lock_irqsave(&h->lock, flags);
        hdev = sdev->hostdata;
        if (!hdev || is_logical_device(hdev) || !hdev->expose_device) {
                spin_unlock_irqrestore(&h->lock, flags);
                return -ENODEV;
        }
        sas_address = hdev->sas_address;
        spin_unlock_irqrestore(&h->lock, flags);

        return snprintf(buf, PAGE_SIZE, "0x%016llx\n", sas_address);
}

static ssize_t host_show_hp_ssd_smart_path_enabled(struct device *dev,
             struct device_attribute *attr, char *buf)
{
        struct ctlr_info *h;
        struct scsi_device *sdev;
        struct hpsa_scsi_dev_t *hdev;
        unsigned long flags;
        int offload_enabled;

        sdev = to_scsi_device(dev);
        h = sdev_to_hba(sdev);
        spin_lock_irqsave(&h->lock, flags);
        hdev = sdev->hostdata;
        if (!hdev) {
                spin_unlock_irqrestore(&h->lock, flags);
                return -ENODEV;
        }
        offload_enabled = hdev->offload_enabled;
        spin_unlock_irqrestore(&h->lock, flags);

        if (hdev->devtype == TYPE_DISK || hdev->devtype == TYPE_ZBC)
                return snprintf(buf, 20, "%d\n", offload_enabled);
        else
                return snprintf(buf, 40, "%s\n",
                                "Not applicable for a controller");
}

#define MAX_PATHS 8
static ssize_t path_info_show(struct device *dev,
             struct device_attribute *attr, char *buf)
{
        struct ctlr_info *h;
        struct scsi_device *sdev;
        struct hpsa_scsi_dev_t *hdev;
        unsigned long flags;
        int i;
        int output_len = 0;
        u8 box;
        u8 bay;
        u8 path_map_index = 0;
        char *active;
        unsigned char phys_connector[2];

        sdev = to_scsi_device(dev);
        h = sdev_to_hba(sdev);
        spin_lock_irqsave(&h->devlock, flags);
        hdev = sdev->hostdata;
        if (!hdev) {
                spin_unlock_irqrestore(&h->devlock, flags);
                return -ENODEV;
        }

        bay = hdev->bay;
        for (i = 0; i < MAX_PATHS; i++) {
                path_map_index = 1<<i;
                if (i == hdev->active_path_index)
                        active = "Active";
                else if (hdev->path_map & path_map_index)
                        active = "Inactive";
                else
                        continue;

                output_len += scnprintf(buf + output_len,
                                PAGE_SIZE - output_len,
                                "[%d:%d:%d:%d] %20.20s ",
                                h->scsi_host->host_no,
                                hdev->bus, hdev->target, hdev->lun,
                                scsi_device_type(hdev->devtype));

                if (hdev->devtype == TYPE_RAID || is_logical_device(hdev)) {
                        output_len += scnprintf(buf + output_len,
                                                PAGE_SIZE - output_len,
                                                "%s\n", active);
                        continue;
                }

                box = hdev->box[i];
                memcpy(&phys_connector, &hdev->phys_connector[i],
                        sizeof(phys_connector));
                if (phys_connector[0] < '0')
                        phys_connector[0] = '0';
                if (phys_connector[1] < '0')
                        phys_connector[1] = '0';
                output_len += scnprintf(buf + output_len,
                                PAGE_SIZE - output_len,
                                "PORT: %.2s ",
                                phys_connector);
                if ((hdev->devtype == TYPE_DISK || hdev->devtype == TYPE_ZBC) &&
                        hdev->expose_device) {
                        if (box == 0 || box == 0xFF) {
                                output_len += scnprintf(buf + output_len,
                                        PAGE_SIZE - output_len,
                                        "BAY: %hhu %s\n",
                                        bay, active);
                        } else {
                                output_len += scnprintf(buf + output_len,
                                        PAGE_SIZE - output_len,
                                        "BOX: %hhu BAY: %hhu %s\n",
                                        box, bay, active);
                        }
                } else if (box != 0 && box != 0xFF) {
                        output_len += scnprintf(buf + output_len,
                                PAGE_SIZE - output_len, "BOX: %hhu %s\n",
                                box, active);
                } else
                        output_len += scnprintf(buf + output_len,
                                PAGE_SIZE - output_len, "%s\n", active);
        }

        spin_unlock_irqrestore(&h->devlock, flags);
        return output_len;
}

static ssize_t host_show_ctlr_num(struct device *dev,
        struct device_attribute *attr, char *buf)
{
        struct ctlr_info *h;
        struct Scsi_Host *shost = class_to_shost(dev);

        h = shost_to_hba(shost);
        return snprintf(buf, 20, "%d\n", h->ctlr);
}

static ssize_t host_show_legacy_board(struct device *dev,
        struct device_attribute *attr, char *buf)
{
        struct ctlr_info *h;
        struct Scsi_Host *shost = class_to_shost(dev);

        h = shost_to_hba(shost);
        return snprintf(buf, 20, "%d\n", h->legacy_board ? 1 : 0);
}

static DEVICE_ATTR_RO(raid_level);
static DEVICE_ATTR_RO(lunid);
static DEVICE_ATTR_RO(unique_id);
static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
static DEVICE_ATTR_RO(sas_address);
static DEVICE_ATTR(hp_ssd_smart_path_enabled, S_IRUGO,
                        host_show_hp_ssd_smart_path_enabled, NULL);
static DEVICE_ATTR_RO(path_info);
static DEVICE_ATTR(hp_ssd_smart_path_status, S_IWUSR|S_IRUGO|S_IROTH,
                host_show_hp_ssd_smart_path_status,
                host_store_hp_ssd_smart_path_status);
static DEVICE_ATTR(raid_offload_debug, S_IWUSR, NULL,
                        host_store_raid_offload_debug);
static DEVICE_ATTR(firmware_revision, S_IRUGO,
        host_show_firmware_revision, NULL);
static DEVICE_ATTR(commands_outstanding, S_IRUGO,
        host_show_commands_outstanding, NULL);
static DEVICE_ATTR(transport_mode, S_IRUGO,
        host_show_transport_mode, NULL);
static DEVICE_ATTR(resettable, S_IRUGO,
        host_show_resettable, NULL);
static DEVICE_ATTR(lockup_detected, S_IRUGO,
        host_show_lockup_detected, NULL);
static DEVICE_ATTR(ctlr_num, S_IRUGO,
        host_show_ctlr_num, NULL);
static DEVICE_ATTR(legacy_board, S_IRUGO,
        host_show_legacy_board, NULL);

static struct attribute *hpsa_sdev_attrs[] = {
        &dev_attr_raid_level.attr,
        &dev_attr_lunid.attr,
        &dev_attr_unique_id.attr,
        &dev_attr_hp_ssd_smart_path_enabled.attr,
        &dev_attr_path_info.attr,
        &dev_attr_sas_address.attr,
        NULL,
};

ATTRIBUTE_GROUPS(hpsa_sdev);

static struct attribute *hpsa_shost_attrs[] = {
        &dev_attr_rescan.attr,
        &dev_attr_firmware_revision.attr,
        &dev_attr_commands_outstanding.attr,
        &dev_attr_transport_mode.attr,
        &dev_attr_resettable.attr,
        &dev_attr_hp_ssd_smart_path_status.attr,
        &dev_attr_raid_offload_debug.attr,
        &dev_attr_lockup_detected.attr,
        &dev_attr_ctlr_num.attr,
        &dev_attr_legacy_board.attr,
        NULL,
};

ATTRIBUTE_GROUPS(hpsa_shost);

#define HPSA_NRESERVED_CMDS     (HPSA_CMDS_RESERVED_FOR_DRIVER +\
                                 HPSA_MAX_CONCURRENT_PASSTHRUS)

static const struct scsi_host_template hpsa_driver_template = {
        .module                 = THIS_MODULE,
        .name                   = HPSA,
        .proc_name              = HPSA,
        .queuecommand           = hpsa_scsi_queue_command,
        .scan_start             = hpsa_scan_start,
        .scan_finished          = hpsa_scan_finished,
        .change_queue_depth     = hpsa_change_queue_depth,
        .this_id                = -1,
        .eh_device_reset_handler = hpsa_eh_device_reset_handler,
        .ioctl                  = hpsa_ioctl,
        .sdev_init              = hpsa_sdev_init,
        .sdev_configure         = hpsa_sdev_configure,
        .sdev_destroy           = hpsa_sdev_destroy,
#ifdef CONFIG_COMPAT
        .compat_ioctl           = hpsa_compat_ioctl,
#endif
        .sdev_groups = hpsa_sdev_groups,
        .shost_groups = hpsa_shost_groups,
        .max_sectors = 2048,
        .no_write_same = 1,
};

static inline u32 next_command(struct ctlr_info *h, u8 q)
{
        u32 a;
        struct reply_queue_buffer *rq = &h->reply_queue[q];

        if (h->transMethod & CFGTBL_Trans_io_accel1)
                return h->access.command_completed(h, q);

        if (unlikely(!(h->transMethod & CFGTBL_Trans_Performant)))
                return h->access.command_completed(h, q);

        if ((rq->head[rq->current_entry] & 1) == rq->wraparound) {
                a = rq->head[rq->current_entry];
                rq->current_entry++;
                atomic_dec(&h->commands_outstanding);
        } else {
                a = FIFO_EMPTY;
        }
        /* Check for wraparound */
        if (rq->current_entry == h->max_commands) {
                rq->current_entry = 0;
                rq->wraparound ^= 1;
        }
        return a;
}

/*
 * There are some special bits in the bus address of the
 * command that we have to set for the controller to know
 * how to process the command:
 *
 * Normal performant mode:
 * bit 0: 1 means performant mode, 0 means simple mode.
 * bits 1-3 = block fetch table entry
 * bits 4-6 = command type (== 0)
 *
 * ioaccel1 mode:
 * bit 0 = "performant mode" bit.
 * bits 1-3 = block fetch table entry
 * bits 4-6 = command type (== 110)
 * (command type is needed because ioaccel1 mode
 * commands are submitted through the same register as normal
 * mode commands, so this is how the controller knows whether
 * the command is normal mode or ioaccel1 mode.)
 *
 * ioaccel2 mode:
 * bit 0 = "performant mode" bit.
 * bits 1-4 = block fetch table entry (note extra bit)
 * bits 4-6 = not needed, because ioaccel2 mode has
 * a separate special register for submitting commands.
 */

/*
 * set_performant_mode: Modify the tag for cciss performant
 * set bit 0 for pull model, bits 3-1 for block fetch
 * register number
 */
#define DEFAULT_REPLY_QUEUE (-1)
static void set_performant_mode(struct ctlr_info *h, struct CommandList *c,
                                        int reply_queue)
{
        if (likely(h->transMethod & CFGTBL_Trans_Performant)) {
                c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1);
                if (unlikely(!h->msix_vectors))
                        return;
                c->Header.ReplyQueue = reply_queue;
        }
}

static void set_ioaccel1_performant_mode(struct ctlr_info *h,
                                                struct CommandList *c,
                                                int reply_queue)
{
        struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex];

        /*
         * Tell the controller to post the reply to the queue for this
         * processor.  This seems to give the best I/O throughput.
         */
        cp->ReplyQueue = reply_queue;
        /*
         * Set the bits in the address sent down to include:
         *  - performant mode bit (bit 0)
         *  - pull count (bits 1-3)
         *  - command type (bits 4-6)
         */
        c->busaddr |= 1 | (h->ioaccel1_blockFetchTable[c->Header.SGList] << 1) |
                                        IOACCEL1_BUSADDR_CMDTYPE;
}

static void set_ioaccel2_tmf_performant_mode(struct ctlr_info *h,
                                                struct CommandList *c,
                                                int reply_queue)
{
        struct hpsa_tmf_struct *cp = (struct hpsa_tmf_struct *)
                &h->ioaccel2_cmd_pool[c->cmdindex];

        /* Tell the controller to post the reply to the queue for this
         * processor.  This seems to give the best I/O throughput.
         */
        cp->reply_queue = reply_queue;
        /* Set the bits in the address sent down to include:
         *  - performant mode bit not used in ioaccel mode 2
         *  - pull count (bits 0-3)
         *  - command type isn't needed for ioaccel2
         */
        c->busaddr |= h->ioaccel2_blockFetchTable[0];
}

static void set_ioaccel2_performant_mode(struct ctlr_info *h,
                                                struct CommandList *c,
                                                int reply_queue)
{
        struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex];

        /*
         * Tell the controller to post the reply to the queue for this
         * processor.  This seems to give the best I/O throughput.
         */
        cp->reply_queue = reply_queue;
        /*
         * Set the bits in the address sent down to include:
         *  - performant mode bit not used in ioaccel mode 2
         *  - pull count (bits 0-3)
         *  - command type isn't needed for ioaccel2
         */
        c->busaddr |= (h->ioaccel2_blockFetchTable[cp->sg_count]);
}

static int is_firmware_flash_cmd(u8 *cdb)
{
        return cdb[0] == BMIC_WRITE && cdb[6] == BMIC_FLASH_FIRMWARE;
}

/*
 * During firmware flash, the heartbeat register may not update as frequently
 * as it should.  So we dial down lockup detection during firmware flash. and
 * dial it back up when firmware flash completes.
 */
#define HEARTBEAT_SAMPLE_INTERVAL_DURING_FLASH (240 * HZ)
#define HEARTBEAT_SAMPLE_INTERVAL (30 * HZ)
#define HPSA_EVENT_MONITOR_INTERVAL (15 * HZ)
static void dial_down_lockup_detection_during_fw_flash(struct ctlr_info *h,
                struct CommandList *c)
{
        if (!is_firmware_flash_cmd(c->Request.CDB))
                return;
        atomic_inc(&h->firmware_flash_in_progress);
        h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL_DURING_FLASH;
}

static void dial_up_lockup_detection_on_fw_flash_complete(struct ctlr_info *h,
                struct CommandList *c)
{
        if (is_firmware_flash_cmd(c->Request.CDB) &&
                atomic_dec_and_test(&h->firmware_flash_in_progress))
                h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
}

static void __enqueue_cmd_and_start_io(struct ctlr_info *h,
        struct CommandList *c, int reply_queue)
{
        dial_down_lockup_detection_during_fw_flash(h, c);
        atomic_inc(&h->commands_outstanding);
        /*
         * Check to see if the command is being retried.
         */
        if (c->device && !c->retry_pending)
                atomic_inc(&c->device->commands_outstanding);

        reply_queue = h->reply_map[raw_smp_processor_id()];
        switch (c->cmd_type) {
        case CMD_IOACCEL1:
                set_ioaccel1_performant_mode(h, c, reply_queue);
                writel(c->busaddr, h->vaddr + SA5_REQUEST_PORT_OFFSET);
                break;
        case CMD_IOACCEL2:
                set_ioaccel2_performant_mode(h, c, reply_queue);
                writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32);
                break;
        case IOACCEL2_TMF:
                set_ioaccel2_tmf_performant_mode(h, c, reply_queue);
                writel(c->busaddr, h->vaddr + IOACCEL2_INBOUND_POSTQ_32);
                break;
        default:
                set_performant_mode(h, c, reply_queue);
                h->access.submit_command(h, c);
        }
}

static void enqueue_cmd_and_start_io(struct ctlr_info *h, struct CommandList *c)
{
        __enqueue_cmd_and_start_io(h, c, DEFAULT_REPLY_QUEUE);
}

static inline int is_hba_lunid(unsigned char scsi3addr[])
{
        return memcmp(scsi3addr, RAID_CTLR_LUNID, 8) == 0;
}

static inline int is_scsi_rev_5(struct ctlr_info *h)
{
        if (!h->hba_inquiry_data)
                return 0;
        if ((h->hba_inquiry_data[2] & 0x07) == 5)
                return 1;
        return 0;
}

static int hpsa_find_target_lun(struct ctlr_info *h,
        unsigned char scsi3addr[], int bus, int *target, int *lun)
{
        /* finds an unused bus, target, lun for a new physical device
         * assumes h->devlock is held
         */
        int i, found = 0;
        DECLARE_BITMAP(lun_taken, HPSA_MAX_DEVICES);

        bitmap_zero(lun_taken, HPSA_MAX_DEVICES);

        for (i = 0; i < h->ndevices; i++) {
                if (h->dev[i]->bus == bus && h->dev[i]->target != -1)
                        __set_bit(h->dev[i]->target, lun_taken);
        }

        i = find_first_zero_bit(lun_taken, HPSA_MAX_DEVICES);
        if (i < HPSA_MAX_DEVICES) {
                /* *bus = 1; */
                *target = i;
                *lun = 0;
                found = 1;
        }
        return !found;
}

static void hpsa_show_dev_msg(const char *level, struct ctlr_info *h,
        struct hpsa_scsi_dev_t *dev, char *description)
{
#define LABEL_SIZE 25
        char label[LABEL_SIZE];

        if (h == NULL || h->pdev == NULL || h->scsi_host == NULL)
                return;

        switch (dev->devtype) {
        case TYPE_RAID:
                snprintf(label, LABEL_SIZE, "controller");
                break;
        case TYPE_ENCLOSURE:
                snprintf(label, LABEL_SIZE, "enclosure");
                break;
        case TYPE_DISK:
        case TYPE_ZBC:
                if (dev->external)
                        snprintf(label, LABEL_SIZE, "external");
                else if (!is_logical_dev_addr_mode(dev->scsi3addr))
                        snprintf(label, LABEL_SIZE, "%s",
                                raid_label[PHYSICAL_DRIVE]);
                else
                        snprintf(label, LABEL_SIZE, "RAID-%s",
                                dev->raid_level > RAID_UNKNOWN ? "?" :
                                raid_label[dev->raid_level]);
                break;
        case TYPE_ROM:
                snprintf(label, LABEL_SIZE, "rom");
                break;
        case TYPE_TAPE:
                snprintf(label, LABEL_SIZE, "tape");
                break;
        case TYPE_MEDIUM_CHANGER:
                snprintf(label, LABEL_SIZE, "changer");
                break;
        default:
                snprintf(label, LABEL_SIZE, "UNKNOWN");
                break;
        }

        dev_printk(level, &h->pdev->dev,
                        "scsi %d:%d:%d:%d: %s %s %.8s %.16s %s SSDSmartPathCap%c En%c Exp=%d\n",
                        h->scsi_host->host_no, dev->bus, dev->target, dev->lun,
                        description,
                        scsi_device_type(dev->devtype),
                        dev->vendor,
                        dev->model,
                        label,
                        dev->offload_config ? '+' : '-',
                        dev->offload_to_be_enabled ? '+' : '-',
                        dev->expose_device);
}

/* Add an entry into h->dev[] array. */
static int hpsa_scsi_add_entry(struct ctlr_info *h,
                struct hpsa_scsi_dev_t *device,
                struct hpsa_scsi_dev_t *added[], int *nadded)
{
        /* assumes h->devlock is held */
        int n = h->ndevices;
        int i;
        unsigned char addr1[8], addr2[8];
        struct hpsa_scsi_dev_t *sd;

        if (n >= HPSA_MAX_DEVICES) {
                dev_err(&h->pdev->dev, "too many devices, some will be "
                        "inaccessible.\n");
                return -1;
        }

        /* physical devices do not have lun or target assigned until now. */
        if (device->lun != -1)
                /* Logical device, lun is already assigned. */
                goto lun_assigned;

        /* If this device a non-zero lun of a multi-lun device
         * byte 4 of the 8-byte LUN addr will contain the logical
         * unit no, zero otherwise.
         */
        if (device->scsi3addr[4] == 0) {
                /* This is not a non-zero lun of a multi-lun device */
                if (hpsa_find_target_lun(h, device->scsi3addr,
                        device->bus, &device->target, &device->lun) != 0)
                        return -1;
                goto lun_assigned;
        }

        /* This is a non-zero lun of a multi-lun device.
         * Search through our list and find the device which
         * has the same 8 byte LUN address, excepting byte 4 and 5.
         * Assign the same bus and target for this new LUN.
         * Use the logical unit number from the firmware.
         */
        memcpy(addr1, device->scsi3addr, 8);
        addr1[4] = 0;
        addr1[5] = 0;
        for (i = 0; i < n; i++) {
                sd = h->dev[i];
                memcpy(addr2, sd->scsi3addr, 8);
                addr2[4] = 0;
                addr2[5] = 0;
                /* differ only in byte 4 and 5? */
                if (memcmp(addr1, addr2, 8) == 0) {
                        device->bus = sd->bus;
                        device->target = sd->target;
                        device->lun = device->scsi3addr[4];
                        break;
                }
        }
        if (device->lun == -1) {
                dev_warn(&h->pdev->dev, "physical device with no LUN=0,"
                        " suspect firmware bug or unsupported hardware "
                        "configuration.\n");
                return -1;
        }

lun_assigned:

        h->dev[n] = device;
        h->ndevices++;
        added[*nadded] = device;
        (*nadded)++;
        hpsa_show_dev_msg(KERN_INFO, h, device,
                device->expose_device ? "added" : "masked");
        return 0;
}

/*
 * Called during a scan operation.
 *
 * Update an entry in h->dev[] array.
 */
static void hpsa_scsi_update_entry(struct ctlr_info *h,
        int entry, struct hpsa_scsi_dev_t *new_entry)
{
        /* assumes h->devlock is held */
        BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);

        /* Raid level changed. */
        h->dev[entry]->raid_level = new_entry->raid_level;

        /*
         * ioacccel_handle may have changed for a dual domain disk
         */
        h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;

        /* Raid offload parameters changed.  Careful about the ordering. */
        if (new_entry->offload_config && new_entry->offload_to_be_enabled) {
                /*
                 * if drive is newly offload_enabled, we want to copy the
                 * raid map data first.  If previously offload_enabled and
                 * offload_config were set, raid map data had better be
                 * the same as it was before. If raid map data has changed
                 * then it had better be the case that
                 * h->dev[entry]->offload_enabled is currently 0.
                 */
                h->dev[entry]->raid_map = new_entry->raid_map;
                h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
        }
        if (new_entry->offload_to_be_enabled) {
                h->dev[entry]->ioaccel_handle = new_entry->ioaccel_handle;
                wmb(); /* set ioaccel_handle *before* hba_ioaccel_enabled */
        }
        h->dev[entry]->hba_ioaccel_enabled = new_entry->hba_ioaccel_enabled;
        h->dev[entry]->offload_config = new_entry->offload_config;
        h->dev[entry]->offload_to_mirror = new_entry->offload_to_mirror;
        h->dev[entry]->queue_depth = new_entry->queue_depth;

        /*
         * We can turn off ioaccel offload now, but need to delay turning
         * ioaccel on until we can update h->dev[entry]->phys_disk[], but we
         * can't do that until all the devices are updated.
         */
        h->dev[entry]->offload_to_be_enabled = new_entry->offload_to_be_enabled;

        /*
         * turn ioaccel off immediately if told to do so.
         */
        if (!new_entry->offload_to_be_enabled)
                h->dev[entry]->offload_enabled = 0;

        hpsa_show_dev_msg(KERN_INFO, h, h->dev[entry], "updated");
}

/* Replace an entry from h->dev[] array. */
static void hpsa_scsi_replace_entry(struct ctlr_info *h,
        int entry, struct hpsa_scsi_dev_t *new_entry,
        struct hpsa_scsi_dev_t *added[], int *nadded,
        struct hpsa_scsi_dev_t *removed[], int *nremoved)
{
        /* assumes h->devlock is held */
        BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);
        removed[*nremoved] = h->dev[entry];
        (*nremoved)++;

        /*
         * New physical devices won't have target/lun assigned yet
         * so we need to preserve the values in the slot we are replacing.
         */
        if (new_entry->target == -1) {
                new_entry->target = h->dev[entry]->target;
                new_entry->lun = h->dev[entry]->lun;
        }

        h->dev[entry] = new_entry;
        added[*nadded] = new_entry;
        (*nadded)++;

        hpsa_show_dev_msg(KERN_INFO, h, new_entry, "replaced");
}

/* Remove an entry from h->dev[] array. */
static void hpsa_scsi_remove_entry(struct ctlr_info *h, int entry,
        struct hpsa_scsi_dev_t *removed[], int *nremoved)
{
        /* assumes h->devlock is held */
        int i;
        struct hpsa_scsi_dev_t *sd;

        BUG_ON(entry < 0 || entry >= HPSA_MAX_DEVICES);

        sd = h->dev[entry];
        removed[*nremoved] = h->dev[entry];
        (*nremoved)++;

        for (i = entry; i < h->ndevices-1; i++)
                h->dev[i] = h->dev[i+1];
        h->ndevices--;
        hpsa_show_dev_msg(KERN_INFO, h, sd, "removed");
}

#define SCSI3ADDR_EQ(a, b) ( \
        (a)[7] == (b)[7] && \
        (a)[6] == (b)[6] && \
        (a)[5] == (b)[5] && \
        (a)[4] == (b)[4] && \
        (a)[3] == (b)[3] && \
        (a)[2] == (b)[2] && \
        (a)[1] == (b)[1] && \
        (a)[0] == (b)[0])

static void fixup_botched_add(struct ctlr_info *h,
        struct hpsa_scsi_dev_t *added)
{
        /* called when scsi_add_device fails in order to re-adjust
         * h->dev[] to match the mid layer's view.
         */
        unsigned long flags;
        int i, j;

        spin_lock_irqsave(&h->lock, flags);
        for (i = 0; i < h->ndevices; i++) {
                if (h->dev[i] == added) {
                        for (j = i; j < h->ndevices-1; j++)
                                h->dev[j] = h->dev[j+1];
                        h->ndevices--;
                        break;
                }
        }
        spin_unlock_irqrestore(&h->lock, flags);
        kfree(added);
}

static inline int device_is_the_same(struct hpsa_scsi_dev_t *dev1,
        struct hpsa_scsi_dev_t *dev2)
{
        /* we compare everything except lun and target as these
         * are not yet assigned.  Compare parts likely
         * to differ first
         */
        if (memcmp(dev1->scsi3addr, dev2->scsi3addr,
                sizeof(dev1->scsi3addr)) != 0)
                return 0;
        if (memcmp(dev1->device_id, dev2->device_id,
                sizeof(dev1->device_id)) != 0)
                return 0;
        if (memcmp(dev1->model, dev2->model, sizeof(dev1->model)) != 0)
                return 0;
        if (memcmp(dev1->vendor, dev2->vendor, sizeof(dev1->vendor)) != 0)
                return 0;
        if (dev1->devtype != dev2->devtype)
                return 0;
        if (dev1->bus != dev2->bus)
                return 0;
        return 1;
}

static inline int device_updated(struct hpsa_scsi_dev_t *dev1,
        struct hpsa_scsi_dev_t *dev2)
{
        /* Device attributes that can change, but don't mean
         * that the device is a different device, nor that the OS
         * needs to be told anything about the change.
         */
        if (dev1->raid_level != dev2->raid_level)
                return 1;
        if (dev1->offload_config != dev2->offload_config)
                return 1;
        if (dev1->offload_to_be_enabled != dev2->offload_to_be_enabled)
                return 1;
        if (!is_logical_dev_addr_mode(dev1->scsi3addr))
                if (dev1->queue_depth != dev2->queue_depth)
                        return 1;
        /*
         * This can happen for dual domain devices. An active
         * path change causes the ioaccel handle to change
         *
         * for example note the handle differences between p0 and p1
         * Device                    WWN               ,WWN hash,Handle
         * D016 p0|0x3 [02]P2E:01:01,0x5000C5005FC4DACA,0x9B5616,0x01030003
         *      p1                   0x5000C5005FC4DAC9,0x6798C0,0x00040004
         */
        if (dev1->ioaccel_handle != dev2->ioaccel_handle)
                return 1;
        return 0;
}

/* Find needle in haystack.  If exact match found, return DEVICE_SAME,
 * and return needle location in *index.  If scsi3addr matches, but not
 * vendor, model, serial num, etc. return DEVICE_CHANGED, and return needle
 * location in *index.
 * In the case of a minor device attribute change, such as RAID level, just
 * return DEVICE_UPDATED, along with the updated device's location in index.
 * If needle not found, return DEVICE_NOT_FOUND.
 */
static int hpsa_scsi_find_entry(struct hpsa_scsi_dev_t *needle,
        struct hpsa_scsi_dev_t *haystack[], int haystack_size,
        int *index)
{
        int i;
#define DEVICE_NOT_FOUND 0
#define DEVICE_CHANGED 1
#define DEVICE_SAME 2
#define DEVICE_UPDATED 3
        if (needle == NULL)
                return DEVICE_NOT_FOUND;

        for (i = 0; i < haystack_size; i++) {
                if (haystack[i] == NULL) /* previously removed. */
                        continue;
                if (SCSI3ADDR_EQ(needle->scsi3addr, haystack[i]->scsi3addr)) {
                        *index = i;
                        if (device_is_the_same(needle, haystack[i])) {
                                if (device_updated(needle, haystack[i]))
                                        return DEVICE_UPDATED;
                                return DEVICE_SAME;
                        } else {
                                /* Keep offline devices offline */
                                if (needle->volume_offline)
                                        return DEVICE_NOT_FOUND;
                                return DEVICE_CHANGED;
                        }
                }
        }
        *index = -1;
        return DEVICE_NOT_FOUND;
}

static void hpsa_monitor_offline_device(struct ctlr_info *h,
                                        unsigned char scsi3addr[])
{
        struct offline_device_entry *device;
        unsigned long flags;

        /* Check to see if device is already on the list */
        spin_lock_irqsave(&h->offline_device_lock, flags);
        list_for_each_entry(device, &h->offline_device_list, offline_list) {
                if (memcmp(device->scsi3addr, scsi3addr,
                        sizeof(device->scsi3addr)) == 0) {
                        spin_unlock_irqrestore(&h->offline_device_lock, flags);
                        return;
                }
        }
        spin_unlock_irqrestore(&h->offline_device_lock, flags);

        /* Device is not on the list, add it. */
        device = kmalloc_obj(*device);
        if (!device)
                return;

        memcpy(device->scsi3addr, scsi3addr, sizeof(device->scsi3addr));
        spin_lock_irqsave(&h->offline_device_lock, flags);
        list_add_tail(&device->offline_list, &h->offline_device_list);
        spin_unlock_irqrestore(&h->offline_device_lock, flags);
}

/* Print a message explaining various offline volume states */
static void hpsa_show_volume_status(struct ctlr_info *h,
        struct hpsa_scsi_dev_t *sd)
{
        if (sd->volume_offline == HPSA_VPD_LV_STATUS_UNSUPPORTED)
                dev_info(&h->pdev->dev,
                        "C%d:B%d:T%d:L%d Volume status is not available through vital product data pages.\n",
                        h->scsi_host->host_no,
                        sd->bus, sd->target, sd->lun);
        switch (sd->volume_offline) {
        case HPSA_LV_OK:
                break;
        case HPSA_LV_UNDERGOING_ERASE:
                dev_info(&h->pdev->dev,
                        "C%d:B%d:T%d:L%d Volume is undergoing background erase process.\n",
                        h->scsi_host->host_no,
                        sd->bus, sd->target, sd->lun);
                break;
        case HPSA_LV_NOT_AVAILABLE:
                dev_info(&h->pdev->dev,
                        "C%d:B%d:T%d:L%d Volume is waiting for transforming volume.\n",
                        h->scsi_host->host_no,
                        sd->bus, sd->target, sd->lun);
                break;
        case HPSA_LV_UNDERGOING_RPI:
                dev_info(&h->pdev->dev,
                        "C%d:B%d:T%d:L%d Volume is undergoing rapid parity init.\n",
                        h->scsi_host->host_no,
                        sd->bus, sd->target, sd->lun);
                break;
        case HPSA_LV_PENDING_RPI:
                dev_info(&h->pdev->dev,
                        "C%d:B%d:T%d:L%d Volume is queued for rapid parity initialization process.\n",
                        h->scsi_host->host_no,
                        sd->bus, sd->target, sd->lun);
                break;
        case HPSA_LV_ENCRYPTED_NO_KEY:
                dev_info(&h->pdev->dev,
                        "C%d:B%d:T%d:L%d Volume is encrypted and cannot be accessed because key is not present.\n",
                        h->scsi_host->host_no,
                        sd->bus, sd->target, sd->lun);
                break;
        case HPSA_LV_PLAINTEXT_IN_ENCRYPT_ONLY_CONTROLLER:
                dev_info(&h->pdev->dev,
                        "C%d:B%d:T%d:L%d Volume is not encrypted and cannot be accessed because controller is in encryption-only mode.\n",
                        h->scsi_host->host_no,
                        sd->bus, sd->target, sd->lun);
                break;
        case HPSA_LV_UNDERGOING_ENCRYPTION:
                dev_info(&h->pdev->dev,
                        "C%d:B%d:T%d:L%d Volume is undergoing encryption process.\n",
                        h->scsi_host->host_no,
                        sd->bus, sd->target, sd->lun);
                break;
        case HPSA_LV_UNDERGOING_ENCRYPTION_REKEYING:
                dev_info(&h->pdev->dev,
                        "C%d:B%d:T%d:L%d Volume is undergoing encryption re-keying process.\n",
                        h->scsi_host->host_no,
                        sd->bus, sd->target, sd->lun);
                break;
        case HPSA_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER:
                dev_info(&h->pdev->dev,
                        "C%d:B%d:T%d:L%d Volume is encrypted and cannot be accessed because controller does not have encryption enabled.\n",
                        h->scsi_host->host_no,
                        sd->bus, sd->target, sd->lun);
                break;
        case HPSA_LV_PENDING_ENCRYPTION:
                dev_info(&h->pdev->dev,
                        "C%d:B%d:T%d:L%d Volume is pending migration to encrypted state, but process has not started.\n",
                        h->scsi_host->host_no,
                        sd->bus, sd->target, sd->lun);
                break;
        case HPSA_LV_PENDING_ENCRYPTION_REKEYING:
                dev_info(&h->pdev->dev,
                        "C%d:B%d:T%d:L%d Volume is encrypted and is pending encryption rekeying.\n",
                        h->scsi_host->host_no,
                        sd->bus, sd->target, sd->lun);
                break;
        }
}

/*
 * Figure the list of physical drive pointers for a logical drive with
 * raid offload configured.
 */
static void hpsa_figure_phys_disk_ptrs(struct ctlr_info *h,
                                struct hpsa_scsi_dev_t *dev[], int ndevices,
                                struct hpsa_scsi_dev_t *logical_drive)
{
        struct raid_map_data *map = &logical_drive->raid_map;
        struct raid_map_disk_data *dd = &map->data[0];
        int i, j;
        int total_disks_per_row = le16_to_cpu(map->data_disks_per_row) +
                                le16_to_cpu(map->metadata_disks_per_row);
        int nraid_map_entries = le16_to_cpu(map->row_cnt) *
                                le16_to_cpu(map->layout_map_count) *
                                total_disks_per_row;
        int nphys_disk = le16_to_cpu(map->layout_map_count) *
                                total_disks_per_row;
        int qdepth;

        if (nraid_map_entries > RAID_MAP_MAX_ENTRIES)
                nraid_map_entries = RAID_MAP_MAX_ENTRIES;

        logical_drive->nphysical_disks = nraid_map_entries;

        qdepth = 0;
        for (i = 0; i < nraid_map_entries; i++) {
                logical_drive->phys_disk[i] = NULL;
                if (!logical_drive->offload_config)
                        continue;
                for (j = 0; j < ndevices; j++) {
                        if (dev[j] == NULL)
                                continue;
                        if (dev[j]->devtype != TYPE_DISK &&
                            dev[j]->devtype != TYPE_ZBC)
                                continue;
                        if (is_logical_device(dev[j]))
                                continue;
                        if (dev[j]->ioaccel_handle != dd[i].ioaccel_handle)
                                continue;

                        logical_drive->phys_disk[i] = dev[j];
                        if (i < nphys_disk)
                                qdepth = min(h->nr_cmds, qdepth +
                                    logical_drive->phys_disk[i]->queue_depth);
                        break;
                }

                /*
                 * This can happen if a physical drive is removed and
                 * the logical drive is degraded.  In that case, the RAID
                 * map data will refer to a physical disk which isn't actually
                 * present.  And in that case offload_enabled should already
                 * be 0, but we'll turn it off here just in case
                 */
                if (!logical_drive->phys_disk[i]) {
                        dev_warn(&h->pdev->dev,
                                "%s: [%d:%d:%d:%d] A phys disk component of LV is missing, turning off offload_enabled for LV.\n",
                                __func__,
                                h->scsi_host->host_no, logical_drive->bus,
                                logical_drive->target, logical_drive->lun);
                        hpsa_turn_off_ioaccel_for_device(logical_drive);
                        logical_drive->queue_depth = 8;
                }
        }
        if (nraid_map_entries)
                /*
                 * This is correct for reads, too high for full stripe writes,
                 * way too high for partial stripe writes
                 */
                logical_drive->queue_depth = qdepth;
        else {
                if (logical_drive->external)
                        logical_drive->queue_depth = EXTERNAL_QD;
                else
                        logical_drive->queue_depth = h->nr_cmds;
        }
}

static void hpsa_update_log_drive_phys_drive_ptrs(struct ctlr_info *h,
                                struct hpsa_scsi_dev_t *dev[], int ndevices)
{
        int i;

        for (i = 0; i < ndevices; i++) {
                if (dev[i] == NULL)
                        continue;
                if (dev[i]->devtype != TYPE_DISK &&
                    dev[i]->devtype != TYPE_ZBC)
                        continue;
                if (!is_logical_device(dev[i]))
                        continue;

                /*
                 * If offload is currently enabled, the RAID map and
                 * phys_disk[] assignment *better* not be changing
                 * because we would be changing ioaccel phsy_disk[] pointers
                 * on a ioaccel volume processing I/O requests.
                 *
                 * If an ioaccel volume status changed, initially because it was
                 * re-configured and thus underwent a transformation, or
                 * a drive failed, we would have received a state change
                 * request and ioaccel should have been turned off. When the
                 * transformation completes, we get another state change
                 * request to turn ioaccel back on. In this case, we need
                 * to update the ioaccel information.
                 *
                 * Thus: If it is not currently enabled, but will be after
                 * the scan completes, make sure the ioaccel pointers
                 * are up to date.
                 */

                if (!dev[i]->offload_enabled && dev[i]->offload_to_be_enabled)
                        hpsa_figure_phys_disk_ptrs(h, dev, ndevices, dev[i]);
        }
}

static int hpsa_add_device(struct ctlr_info *h, struct hpsa_scsi_dev_t *device)
{
        int rc = 0;

        if (!h->scsi_host)
                return 1;

        if (is_logical_device(device)) /* RAID */
                rc = scsi_add_device(h->scsi_host, device->bus,
                                        device->target, device->lun);
        else /* HBA */
                rc = hpsa_add_sas_device(h->sas_host, device);

        return rc;
}

static int hpsa_find_outstanding_commands_for_dev(struct ctlr_info *h,
                                                struct hpsa_scsi_dev_t *dev)
{
        int i;
        int count = 0;

        for (i = 0; i < h->nr_cmds; i++) {
                struct CommandList *c = h->cmd_pool + i;
                int refcount = atomic_inc_return(&c->refcount);

                if (refcount > 1 && hpsa_cmd_dev_match(h, c, dev,
                                dev->scsi3addr)) {
                        unsigned long flags;

                        spin_lock_irqsave(&h->lock, flags);     /* Implied MB */
                        if (!hpsa_is_cmd_idle(c))
                                ++count;
                        spin_unlock_irqrestore(&h->lock, flags);
                }

                cmd_free(h, c);
        }

        return count;
}

#define NUM_WAIT 20
static void hpsa_wait_for_outstanding_commands_for_dev(struct ctlr_info *h,
                                                struct hpsa_scsi_dev_t *device)
{
        int cmds = 0;
        int waits = 0;
        int num_wait = NUM_WAIT;

        if (device->external)
                num_wait = HPSA_EH_PTRAID_TIMEOUT;

        while (1) {
                cmds = hpsa_find_outstanding_commands_for_dev(h, device);
                if (cmds == 0)
                        break;
                if (++waits > num_wait)
                        break;
                msleep(1000);
        }

        if (waits > num_wait) {
                dev_warn(&h->pdev->dev,
                        "%s: removing device [%d:%d:%d:%d] with %d outstanding commands!\n",
                        __func__,
                        h->scsi_host->host_no,
                        device->bus, device->target, device->lun, cmds);
        }
}

static void hpsa_remove_device(struct ctlr_info *h,
                        struct hpsa_scsi_dev_t *device)
{
        struct scsi_device *sdev = NULL;

        if (!h->scsi_host)
                return;

        /*
         * Allow for commands to drain
         */
        device->removed = 1;
        hpsa_wait_for_outstanding_commands_for_dev(h, device);

        if (is_logical_device(device)) { /* RAID */
                sdev = scsi_device_lookup(h->scsi_host, device->bus,
                                                device->target, device->lun);
                if (sdev) {
                        scsi_remove_device(sdev);
                        scsi_device_put(sdev);
                } else {
                        /*
                         * We don't expect to get here.  Future commands
                         * to this device will get a selection timeout as
                         * if the device were gone.
                         */
                        hpsa_show_dev_msg(KERN_WARNING, h, device,
                                        "didn't find device for removal.");
                }
        } else { /* HBA */

                hpsa_remove_sas_device(device);
        }
}

static void adjust_hpsa_scsi_table(struct ctlr_info *h,
        struct hpsa_scsi_dev_t *sd[], int nsds)
{
        /* sd contains scsi3 addresses and devtypes, and inquiry
         * data.  This function takes what's in sd to be the current
         * reality and updates h->dev[] to reflect that reality.
         */
        int i, entry, device_change, changes = 0;
        struct hpsa_scsi_dev_t *csd;
        unsigned long flags;
        struct hpsa_scsi_dev_t **added, **removed;
        int nadded, nremoved;

        /*
         * A reset can cause a device status to change
         * re-schedule the scan to see what happened.
         */
        spin_lock_irqsave(&h->reset_lock, flags);
        if (h->reset_in_progress) {
                h->drv_req_rescan = 1;
                spin_unlock_irqrestore(&h->reset_lock, flags);
                return;
        }
        spin_unlock_irqrestore(&h->reset_lock, flags);

        added = kzalloc_objs(*added, HPSA_MAX_DEVICES);
        removed = kzalloc_objs(*removed, HPSA_MAX_DEVICES);

        if (!added || !removed) {
                dev_warn(&h->pdev->dev, "out of memory in "
                        "adjust_hpsa_scsi_table\n");
                goto free_and_out;
        }

        spin_lock_irqsave(&h->devlock, flags);

        /* find any devices in h->dev[] that are not in
         * sd[] and remove them from h->dev[], and for any
         * devices which have changed, remove the old device
         * info and add the new device info.
         * If minor device attributes change, just update
         * the existing device structure.
         */
        i = 0;
        nremoved = 0;
        nadded = 0;
        while (i < h->ndevices) {
                csd = h->dev[i];
                device_change = hpsa_scsi_find_entry(csd, sd, nsds, &entry);
                if (device_change == DEVICE_NOT_FOUND) {
                        changes++;
                        hpsa_scsi_remove_entry(h, i, removed, &nremoved);
                        continue; /* remove ^^^, hence i not incremented */
                } else if (device_change == DEVICE_CHANGED) {
                        changes++;
                        hpsa_scsi_replace_entry(h, i, sd[entry],
                                added, &nadded, removed, &nremoved);
                        /* Set it to NULL to prevent it from being freed
                         * at the bottom of hpsa_update_scsi_devices()
                         */
                        sd[entry] = NULL;
                } else if (device_change == DEVICE_UPDATED) {
                        hpsa_scsi_update_entry(h, i, sd[entry]);
                }
                i++;
        }

        /* Now, make sure every device listed in sd[] is also
         * listed in h->dev[], adding them if they aren't found
         */

        for (i = 0; i < nsds; i++) {
                if (!sd[i]) /* if already added above. */
                        continue;

                /* Don't add devices which are NOT READY, FORMAT IN PROGRESS
                 * as the SCSI mid-layer does not handle such devices well.
                 * It relentlessly loops sending TUR at 3Hz, then READ(10)
                 * at 160Hz, and prevents the system from coming up.
                 */
                if (sd[i]->volume_offline) {
                        hpsa_show_volume_status(h, sd[i]);
                        hpsa_show_dev_msg(KERN_INFO, h, sd[i], "offline");
                        continue;
                }

                device_change = hpsa_scsi_find_entry(sd[i], h->dev,
                                        h->ndevices, &entry);
                if (device_change == DEVICE_NOT_FOUND) {
                        changes++;
                        if (hpsa_scsi_add_entry(h, sd[i], added, &nadded) != 0)
                                break;
                        sd[i] = NULL; /* prevent from being freed later. */
                } else if (device_change == DEVICE_CHANGED) {
                        /* should never happen... */
                        changes++;
                        dev_warn(&h->pdev->dev,
                                "device unexpectedly changed.\n");
                        /* but if it does happen, we just ignore that device */
                }
        }
        hpsa_update_log_drive_phys_drive_ptrs(h, h->dev, h->ndevices);

        /*
         * Now that h->dev[]->phys_disk[] is coherent, we can enable
         * any logical drives that need it enabled.
         *
         * The raid map should be current by now.
         *
         * We are updating the device list used for I/O requests.
         */
        for (i = 0; i < h->ndevices; i++) {
                if (h->dev[i] == NULL)
                        continue;
                h->dev[i]->offload_enabled = h->dev[i]->offload_to_be_enabled;
        }

        spin_unlock_irqrestore(&h->devlock, flags);

        /* Monitor devices which are in one of several NOT READY states to be
         * brought online later. This must be done without holding h->devlock,
         * so don't touch h->dev[]
         */
        for (i = 0; i < nsds; i++) {
                if (!sd[i]) /* if already added above. */
                        continue;
                if (sd[i]->volume_offline)
                        hpsa_monitor_offline_device(h, sd[i]->scsi3addr);
        }

        /* Don't notify scsi mid layer of any changes the first time through
         * (or if there are no changes) scsi_scan_host will do it later the
         * first time through.
         */
        if (!changes)
                goto free_and_out;

        /* Notify scsi mid layer of any removed devices */
        for (i = 0; i < nremoved; i++) {
                if (removed[i] == NULL)
                        continue;
                if (removed[i]->expose_device)
                        hpsa_remove_device(h, removed[i]);
                kfree(removed[i]);
                removed[i] = NULL;
        }

        /* Notify scsi mid layer of any added devices */
        for (i = 0; i < nadded; i++) {
                int rc = 0;

                if (added[i] == NULL)
                        continue;
                if (!(added[i]->expose_device))
                        continue;
                rc = hpsa_add_device(h, added[i]);
                if (!rc)
                        continue;
                dev_warn(&h->pdev->dev,
                        "addition failed %d, device not added.", rc);
                /* now we have to remove it from h->dev,
                 * since it didn't get added to scsi mid layer
                 */
                fixup_botched_add(h, added[i]);
                h->drv_req_rescan = 1;
        }

free_and_out:
        kfree(added);
        kfree(removed);
}

/*
 * Lookup bus/target/lun and return corresponding struct hpsa_scsi_dev_t *
 * Assume's h->devlock is held.
 */
static struct hpsa_scsi_dev_t *lookup_hpsa_scsi_dev(struct ctlr_info *h,
        int bus, int target, int lun)
{
        int i;
        struct hpsa_scsi_dev_t *sd;

        for (i = 0; i < h->ndevices; i++) {
                sd = h->dev[i];
                if (sd->bus == bus && sd->target == target && sd->lun == lun)
                        return sd;
        }
        return NULL;
}

static int hpsa_sdev_init(struct scsi_device *sdev)
{
        struct hpsa_scsi_dev_t *sd = NULL;
        unsigned long flags;
        struct ctlr_info *h;

        h = sdev_to_hba(sdev);
        spin_lock_irqsave(&h->devlock, flags);
        if (sdev_channel(sdev) == HPSA_PHYSICAL_DEVICE_BUS) {
                struct scsi_target *starget;
                struct sas_rphy *rphy;

                starget = scsi_target(sdev);
                rphy = target_to_rphy(starget);
                sd = hpsa_find_device_by_sas_rphy(h, rphy);
                if (sd) {
                        sd->target = sdev_id(sdev);
                        sd->lun = sdev->lun;
                }
        }
        if (!sd)
                sd = lookup_hpsa_scsi_dev(h, sdev_channel(sdev),
                                        sdev_id(sdev), sdev->lun);

        if (sd && sd->expose_device) {
                atomic_set(&sd->ioaccel_cmds_out, 0);
                sdev->hostdata = sd;
        } else
                sdev->hostdata = NULL;
        spin_unlock_irqrestore(&h->devlock, flags);
        return 0;
}

/* configure scsi device based on internal per-device structure */
#define CTLR_TIMEOUT (120 * HZ)
static int hpsa_sdev_configure(struct scsi_device *sdev,
                               struct queue_limits *lim)
{
        struct hpsa_scsi_dev_t *sd;
        int queue_depth;

        sd = sdev->hostdata;
        sdev->no_uld_attach = !sd || !sd->expose_device;

        if (sd) {
                sd->was_removed = 0;
                queue_depth = sd->queue_depth != 0 ?
                                sd->queue_depth : sdev->host->can_queue;
                if (sd->external) {
                        queue_depth = EXTERNAL_QD;
                        sdev->eh_timeout = HPSA_EH_PTRAID_TIMEOUT;
                        blk_queue_rq_timeout(sdev->request_queue,
                                                HPSA_EH_PTRAID_TIMEOUT);
                }
                if (is_hba_lunid(sd->scsi3addr)) {
                        sdev->eh_timeout = CTLR_TIMEOUT;
                        blk_queue_rq_timeout(sdev->request_queue, CTLR_TIMEOUT);
                }
        } else {
                queue_depth = sdev->host->can_queue;
        }

        scsi_change_queue_depth(sdev, queue_depth);

        return 0;
}

static void hpsa_sdev_destroy(struct scsi_device *sdev)
{
        struct hpsa_scsi_dev_t *hdev = NULL;

        hdev = sdev->hostdata;

        if (hdev)
                hdev->was_removed = 1;
}

static void hpsa_free_ioaccel2_sg_chain_blocks(struct ctlr_info *h)
{
        int i;

        if (!h->ioaccel2_cmd_sg_list)
                return;
        for (i = 0; i < h->nr_cmds; i++) {
                kfree(h->ioaccel2_cmd_sg_list[i]);
                h->ioaccel2_cmd_sg_list[i] = NULL;
        }
        kfree(h->ioaccel2_cmd_sg_list);
        h->ioaccel2_cmd_sg_list = NULL;
}

static int hpsa_allocate_ioaccel2_sg_chain_blocks(struct ctlr_info *h)
{
        int i;

        if (h->chainsize <= 0)
                return 0;

        h->ioaccel2_cmd_sg_list =
                kzalloc_objs(*h->ioaccel2_cmd_sg_list, h->nr_cmds);
        if (!h->ioaccel2_cmd_sg_list)
                return -ENOMEM;
        for (i = 0; i < h->nr_cmds; i++) {
                h->ioaccel2_cmd_sg_list[i] =
                        kmalloc_objs(*h->ioaccel2_cmd_sg_list[i],
                                     h->maxsgentries);
                if (!h->ioaccel2_cmd_sg_list[i])
                        goto clean;
        }
        return 0;

clean:
        hpsa_free_ioaccel2_sg_chain_blocks(h);
        return -ENOMEM;
}

static void hpsa_free_sg_chain_blocks(struct ctlr_info *h)
{
        int i;

        if (!h->cmd_sg_list)
                return;
        for (i = 0; i < h->nr_cmds; i++) {
                kfree(h->cmd_sg_list[i]);
                h->cmd_sg_list[i] = NULL;
        }
        kfree(h->cmd_sg_list);
        h->cmd_sg_list = NULL;
}

static int hpsa_alloc_sg_chain_blocks(struct ctlr_info *h)
{
        int i;

        if (h->chainsize <= 0)
                return 0;

        h->cmd_sg_list = kzalloc_objs(*h->cmd_sg_list, h->nr_cmds);
        if (!h->cmd_sg_list)
                return -ENOMEM;

        for (i = 0; i < h->nr_cmds; i++) {
                h->cmd_sg_list[i] = kmalloc_objs(*h->cmd_sg_list[i],
                                                 h->chainsize);
                if (!h->cmd_sg_list[i])
                        goto clean;

        }
        return 0;

clean:
        hpsa_free_sg_chain_blocks(h);
        return -ENOMEM;
}

static int hpsa_map_ioaccel2_sg_chain_block(struct ctlr_info *h,
        struct io_accel2_cmd *cp, struct CommandList *c)
{
        struct ioaccel2_sg_element *chain_block;
        u64 temp64;
        u32 chain_size;

        chain_block = h->ioaccel2_cmd_sg_list[c->cmdindex];
        chain_size = le32_to_cpu(cp->sg[0].length);
        temp64 = dma_map_single(&h->pdev->dev, chain_block, chain_size,
                                DMA_TO_DEVICE);
        if (dma_mapping_error(&h->pdev->dev, temp64)) {
                /* prevent subsequent unmapping */
                cp->sg->address = 0;
                return -1;
        }
        cp->sg->address = cpu_to_le64(temp64);
        return 0;
}

static void hpsa_unmap_ioaccel2_sg_chain_block(struct ctlr_info *h,
        struct io_accel2_cmd *cp)
{
        struct ioaccel2_sg_element *chain_sg;
        u64 temp64;
        u32 chain_size;

        chain_sg = cp->sg;
        temp64 = le64_to_cpu(chain_sg->address);
        chain_size = le32_to_cpu(cp->sg[0].length);
        dma_unmap_single(&h->pdev->dev, temp64, chain_size, DMA_TO_DEVICE);
}

static int hpsa_map_sg_chain_block(struct ctlr_info *h,
        struct CommandList *c)
{
        struct SGDescriptor *chain_sg, *chain_block;
        u64 temp64;
        u32 chain_len;

        chain_sg = &c->SG[h->max_cmd_sg_entries - 1];
        chain_block = h->cmd_sg_list[c->cmdindex];
        chain_sg->Ext = cpu_to_le32(HPSA_SG_CHAIN);
        chain_len = sizeof(*chain_sg) *
                (le16_to_cpu(c->Header.SGTotal) - h->max_cmd_sg_entries);
        chain_sg->Len = cpu_to_le32(chain_len);
        temp64 = dma_map_single(&h->pdev->dev, chain_block, chain_len,
                                DMA_TO_DEVICE);
        if (dma_mapping_error(&h->pdev->dev, temp64)) {
                /* prevent subsequent unmapping */
                chain_sg->Addr = cpu_to_le64(0);
                return -1;
        }
        chain_sg->Addr = cpu_to_le64(temp64);
        return 0;
}

static void hpsa_unmap_sg_chain_block(struct ctlr_info *h,
        struct CommandList *c)
{
        struct SGDescriptor *chain_sg;

        if (le16_to_cpu(c->Header.SGTotal) <= h->max_cmd_sg_entries)
                return;

        chain_sg = &c->SG[h->max_cmd_sg_entries - 1];
        dma_unmap_single(&h->pdev->dev, le64_to_cpu(chain_sg->Addr),
                        le32_to_cpu(chain_sg->Len), DMA_TO_DEVICE);
}


/* Decode the various types of errors on ioaccel2 path.
 * Return 1 for any error that should generate a RAID path retry.
 * Return 0 for errors that don't require a RAID path retry.
 */
static int handle_ioaccel_mode2_error(struct ctlr_info *h,
                                        struct CommandList *c,
                                        struct scsi_cmnd *cmd,
                                        struct io_accel2_cmd *c2,
                                        struct hpsa_scsi_dev_t *dev)
{
        int data_len;
        int retry = 0;
        u32 ioaccel2_resid = 0;

        switch (c2->error_data.serv_response) {
        case IOACCEL2_SERV_RESPONSE_COMPLETE:
                switch (c2->error_data.status) {
                case IOACCEL2_STATUS_SR_TASK_COMP_GOOD:
                        if (cmd)
                                cmd->result = 0;
                        break;
                case IOACCEL2_STATUS_SR_TASK_COMP_CHK_COND:
                        cmd->result |= SAM_STAT_CHECK_CONDITION;
                        if (c2->error_data.data_present !=
                                        IOACCEL2_SENSE_DATA_PRESENT) {
                                memset(cmd->sense_buffer, 0,
                                        SCSI_SENSE_BUFFERSIZE);
                                break;
                        }
                        /* copy the sense data */
                        data_len = c2->error_data.sense_data_len;
                        if (data_len > SCSI_SENSE_BUFFERSIZE)
                                data_len = SCSI_SENSE_BUFFERSIZE;
                        if (data_len > sizeof(c2->error_data.sense_data_buff))
                                data_len =
                                        sizeof(c2->error_data.sense_data_buff);
                        memcpy(cmd->sense_buffer,
                                c2->error_data.sense_data_buff, data_len);
                        retry = 1;
                        break;
                case IOACCEL2_STATUS_SR_TASK_COMP_BUSY:
                        retry = 1;
                        break;
                case IOACCEL2_STATUS_SR_TASK_COMP_RES_CON:
                        retry = 1;
                        break;
                case IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL:
                        retry = 1;
                        break;
                case IOACCEL2_STATUS_SR_TASK_COMP_ABORTED:
                        retry = 1;
                        break;
                default:
                        retry = 1;
                        break;
                }
                break;
        case IOACCEL2_SERV_RESPONSE_FAILURE:
                switch (c2->error_data.status) {
                case IOACCEL2_STATUS_SR_IO_ERROR:
                case IOACCEL2_STATUS_SR_IO_ABORTED:
                case IOACCEL2_STATUS_SR_OVERRUN:
                        retry = 1;
                        break;
                case IOACCEL2_STATUS_SR_UNDERRUN:
                        cmd->result = (DID_OK << 16);           /* host byte */
                        ioaccel2_resid = get_unaligned_le32(
                                                &c2->error_data.resid_cnt[0]);
                        scsi_set_resid(cmd, ioaccel2_resid);
                        break;
                case IOACCEL2_STATUS_SR_NO_PATH_TO_DEVICE:
                case IOACCEL2_STATUS_SR_INVALID_DEVICE:
                case IOACCEL2_STATUS_SR_IOACCEL_DISABLED:
                        /*
                         * Did an HBA disk disappear? We will eventually
                         * get a state change event from the controller but
                         * in the meantime, we need to tell the OS that the
                         * HBA disk is no longer there and stop I/O
                         * from going down. This allows the potential re-insert
                         * of the disk to get the same device node.
                         */
                        if (dev->physical_device && dev->expose_device) {
                                cmd->result = DID_NO_CONNECT << 16;
                                dev->removed = 1;
                                h->drv_req_rescan = 1;
                                dev_warn(&h->pdev->dev,
                                        "%s: device is gone!\n", __func__);
                        } else
                                /*
                                 * Retry by sending down the RAID path.
                                 * We will get an event from ctlr to
                                 * trigger rescan regardless.
                                 */
                                retry = 1;
                        break;
                default:
                        retry = 1;
                }
                break;
        case IOACCEL2_SERV_RESPONSE_TMF_COMPLETE:
                break;
        case IOACCEL2_SERV_RESPONSE_TMF_SUCCESS:
                break;
        case IOACCEL2_SERV_RESPONSE_TMF_REJECTED:
                retry = 1;
                break;
        case IOACCEL2_SERV_RESPONSE_TMF_WRONG_LUN:
                break;
        default:
                retry = 1;
                break;
        }

        if (dev->in_reset)
                retry = 0;

        return retry;   /* retry on raid path? */
}

static void hpsa_cmd_resolve_events(struct ctlr_info *h,
                struct CommandList *c)
{
        struct hpsa_scsi_dev_t *dev = c->device;

        /*
         * Reset c->scsi_cmd here so that the reset handler will know
         * this command has completed.  Then, check to see if the handler is
         * waiting for this command, and, if so, wake it.
         */
        c->scsi_cmd = SCSI_CMD_IDLE;
        mb();   /* Declare command idle before checking for pending events. */
        if (dev) {
                atomic_dec(&dev->commands_outstanding);
                if (dev->in_reset &&
                        atomic_read(&dev->commands_outstanding) <= 0)
                        wake_up_all(&h->event_sync_wait_queue);
        }
}

static void hpsa_cmd_resolve_and_free(struct ctlr_info *h,
                                      struct CommandList *c)
{
        hpsa_cmd_resolve_events(h, c);
        cmd_tagged_free(h, c);
}

static void hpsa_cmd_free_and_done(struct ctlr_info *h,
                struct CommandList *c, struct scsi_cmnd *cmd)
{
        hpsa_cmd_resolve_and_free(h, c);
        if (cmd)
                scsi_done(cmd);
}

static void hpsa_retry_cmd(struct ctlr_info *h, struct CommandList *c)
{
        INIT_WORK(&c->work, hpsa_command_resubmit_worker);
        queue_work_on(raw_smp_processor_id(), h->resubmit_wq, &c->work);
}

static void process_ioaccel2_completion(struct ctlr_info *h,
                struct CommandList *c, struct scsi_cmnd *cmd,
                struct hpsa_scsi_dev_t *dev)
{
        struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];

        /* check for good status */
        if (likely(c2->error_data.serv_response == 0 &&
                        c2->error_data.status == 0)) {
                cmd->result = 0;
                return hpsa_cmd_free_and_done(h, c, cmd);
        }

        /*
         * Any RAID offload error results in retry which will use
         * the normal I/O path so the controller can handle whatever is
         * wrong.
         */
        if (is_logical_device(dev) &&
                c2->error_data.serv_response ==
                        IOACCEL2_SERV_RESPONSE_FAILURE) {
                if (c2->error_data.status ==
                        IOACCEL2_STATUS_SR_IOACCEL_DISABLED) {
                        hpsa_turn_off_ioaccel_for_device(dev);
                }

                if (dev->in_reset) {
                        cmd->result = DID_RESET << 16;
                        return hpsa_cmd_free_and_done(h, c, cmd);
                }

                return hpsa_retry_cmd(h, c);
        }

        if (handle_ioaccel_mode2_error(h, c, cmd, c2, dev))
                return hpsa_retry_cmd(h, c);

        return hpsa_cmd_free_and_done(h, c, cmd);
}

/* Returns 0 on success, < 0 otherwise. */
static int hpsa_evaluate_tmf_status(struct ctlr_info *h,
                                        struct CommandList *cp)
{
        u8 tmf_status = cp->err_info->ScsiStatus;

        switch (tmf_status) {
        case CISS_TMF_COMPLETE:
                /*
                 * CISS_TMF_COMPLETE never happens, instead,
                 * ei->CommandStatus == 0 for this case.
                 */
        case CISS_TMF_SUCCESS:
                return 0;
        case CISS_TMF_INVALID_FRAME:
        case CISS_TMF_NOT_SUPPORTED:
        case CISS_TMF_FAILED:
        case CISS_TMF_WRONG_LUN:
        case CISS_TMF_OVERLAPPED_TAG:
                break;
        default:
                dev_warn(&h->pdev->dev, "Unknown TMF status: 0x%02x\n",
                                tmf_status);
                break;
        }
        return -tmf_status;
}

static void complete_scsi_command(struct CommandList *cp)
{
        struct scsi_cmnd *cmd;
        struct ctlr_info *h;
        struct ErrorInfo *ei;
        struct hpsa_scsi_dev_t *dev;
        struct io_accel2_cmd *c2;

        u8 sense_key;
        u8 asc;      /* additional sense code */
        u8 ascq;     /* additional sense code qualifier */
        unsigned long sense_data_size;

        ei = cp->err_info;
        cmd = cp->scsi_cmd;
        h = cp->h;

        if (!cmd->device) {
                cmd->result = DID_NO_CONNECT << 16;
                return hpsa_cmd_free_and_done(h, cp, cmd);
        }

        dev = cmd->device->hostdata;
        if (!dev) {
                cmd->result = DID_NO_CONNECT << 16;
                return hpsa_cmd_free_and_done(h, cp, cmd);
        }
        c2 = &h->ioaccel2_cmd_pool[cp->cmdindex];

        scsi_dma_unmap(cmd); /* undo the DMA mappings */
        if ((cp->cmd_type == CMD_SCSI) &&
                (le16_to_cpu(cp->Header.SGTotal) > h->max_cmd_sg_entries))
                hpsa_unmap_sg_chain_block(h, cp);

        if ((cp->cmd_type == CMD_IOACCEL2) &&
                (c2->sg[0].chain_indicator == IOACCEL2_CHAIN))
                hpsa_unmap_ioaccel2_sg_chain_block(h, c2);

        cmd->result = (DID_OK << 16);           /* host byte */

        /* SCSI command has already been cleaned up in SML */
        if (dev->was_removed) {
                hpsa_cmd_resolve_and_free(h, cp);
                return;
        }

        if (cp->cmd_type == CMD_IOACCEL2 || cp->cmd_type == CMD_IOACCEL1) {
                if (dev->physical_device && dev->expose_device &&
                        dev->removed) {
                        cmd->result = DID_NO_CONNECT << 16;
                        return hpsa_cmd_free_and_done(h, cp, cmd);
                }
                if (likely(cp->phys_disk != NULL))
                        atomic_dec(&cp->phys_disk->ioaccel_cmds_out);
        }

        /*
         * We check for lockup status here as it may be set for
         * CMD_SCSI, CMD_IOACCEL1 and CMD_IOACCEL2 commands by
         * fail_all_oustanding_cmds()
         */
        if (unlikely(ei->CommandStatus == CMD_CTLR_LOCKUP)) {
                /* DID_NO_CONNECT will prevent a retry */
                cmd->result = DID_NO_CONNECT << 16;
                return hpsa_cmd_free_and_done(h, cp, cmd);
        }

        if (cp->cmd_type == CMD_IOACCEL2)
                return process_ioaccel2_completion(h, cp, cmd, dev);

        scsi_set_resid(cmd, ei->ResidualCnt);
        if (ei->CommandStatus == 0)
                return hpsa_cmd_free_and_done(h, cp, cmd);

        /* For I/O accelerator commands, copy over some fields to the normal
         * CISS header used below for error handling.
         */
        if (cp->cmd_type == CMD_IOACCEL1) {
                struct io_accel1_cmd *c = &h->ioaccel_cmd_pool[cp->cmdindex];
                cp->Header.SGList = scsi_sg_count(cmd);
                cp->Header.SGTotal = cpu_to_le16(cp->Header.SGList);
                cp->Request.CDBLen = le16_to_cpu(c->io_flags) &
                        IOACCEL1_IOFLAGS_CDBLEN_MASK;
                cp->Header.tag = c->tag;
                memcpy(cp->Header.LUN.LunAddrBytes, c->CISS_LUN, 8);
                memcpy(cp->Request.CDB, c->CDB, cp->Request.CDBLen);

                /* Any RAID offload error results in retry which will use
                 * the normal I/O path so the controller can handle whatever's
                 * wrong.
                 */
                if (is_logical_device(dev)) {
                        if (ei->CommandStatus == CMD_IOACCEL_DISABLED)
                                dev->offload_enabled = 0;
                        return hpsa_retry_cmd(h, cp);
                }
        }

        /* an error has occurred */
        switch (ei->CommandStatus) {

        case CMD_TARGET_STATUS:
                cmd->result |= ei->ScsiStatus;
                /* copy the sense data */
                sense_data_size = min_t(unsigned long, SCSI_SENSE_BUFFERSIZE,
                                        sizeof(ei->SenseInfo));
                if (ei->SenseLen < sense_data_size)
                        sense_data_size = ei->SenseLen;
                memcpy(cmd->sense_buffer, ei->SenseInfo, sense_data_size);
                if (ei->ScsiStatus)
                        decode_sense_data(ei->SenseInfo, sense_data_size,
                                &sense_key, &asc, &ascq);
                if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) {
                        switch (sense_key) {
                        case ABORTED_COMMAND:
                                cmd->result |= DID_SOFT_ERROR << 16;
                                break;
                        case UNIT_ATTENTION:
                                if (asc == 0x3F && ascq == 0x0E)
                                        h->drv_req_rescan = 1;
                                break;
                        case ILLEGAL_REQUEST:
                                if (asc == 0x25 && ascq == 0x00) {
                                        dev->removed = 1;
                                        cmd->result = DID_NO_CONNECT << 16;
                                }
                                break;
                        }
                        break;
                }
                /* Problem was not a check condition
                 * Pass it up to the upper layers...
                 */
                if (ei->ScsiStatus) {
                        dev_warn(&h->pdev->dev, "cp %p has status 0x%x "
                                "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, "
                                "Returning result: 0x%x\n",
                                cp, ei->ScsiStatus,
                                sense_key, asc, ascq,
                                cmd->result);
                } else {  /* scsi status is zero??? How??? */
                        dev_warn(&h->pdev->dev, "cp %p SCSI status was 0. "
                                "Returning no connection.\n", cp),

                        /* Ordinarily, this case should never happen,
                         * but there is a bug in some released firmware
                         * revisions that allows it to happen if, for
                         * example, a 4100 backplane loses power and
                         * the tape drive is in it.  We assume that
                         * it's a fatal error of some kind because we
                         * can't show that it wasn't. We will make it
                         * look like selection timeout since that is
                         * the most common reason for this to occur,
                         * and it's severe enough.
                         */

                        cmd->result = DID_NO_CONNECT << 16;
                }
                break;

        case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
                break;
        case CMD_DATA_OVERRUN:
                dev_warn(&h->pdev->dev,
                        "CDB %16phN data overrun\n", cp->Request.CDB);
                break;
        case CMD_INVALID: {
                /* print_bytes(cp, sizeof(*cp), 1, 0);
                print_cmd(cp); */
                /* We get CMD_INVALID if you address a non-existent device
                 * instead of a selection timeout (no response).  You will
                 * see this if you yank out a drive, then try to access it.
                 * This is kind of a shame because it means that any other
                 * CMD_INVALID (e.g. driver bug) will get interpreted as a
                 * missing target. */
                cmd->result = DID_NO_CONNECT << 16;
        }
                break;
        case CMD_PROTOCOL_ERR:
                cmd->result = DID_ERROR << 16;
                dev_warn(&h->pdev->dev, "CDB %16phN : protocol error\n",
                                cp->Request.CDB);
                break;
        case CMD_HARDWARE_ERR:
                cmd->result = DID_ERROR << 16;
                dev_warn(&h->pdev->dev, "CDB %16phN : hardware error\n",
                        cp->Request.CDB);
                break;
        case CMD_CONNECTION_LOST:
                cmd->result = DID_ERROR << 16;
                dev_warn(&h->pdev->dev, "CDB %16phN : connection lost\n",
                        cp->Request.CDB);
                break;
        case CMD_ABORTED:
                cmd->result = DID_ABORT << 16;
                break;
        case CMD_ABORT_FAILED:
                cmd->result = DID_ERROR << 16;
                dev_warn(&h->pdev->dev, "CDB %16phN : abort failed\n",
                        cp->Request.CDB);
                break;
        case CMD_UNSOLICITED_ABORT:
                cmd->result = DID_SOFT_ERROR << 16; /* retry the command */
                dev_warn(&h->pdev->dev, "CDB %16phN : unsolicited abort\n",
                        cp->Request.CDB);
                break;
        case CMD_TIMEOUT:
                cmd->result = DID_TIME_OUT << 16;
                dev_warn(&h->pdev->dev, "CDB %16phN timed out\n",
                        cp->Request.CDB);
                break;
        case CMD_UNABORTABLE:
                cmd->result = DID_ERROR << 16;
                dev_warn(&h->pdev->dev, "Command unabortable\n");
                break;
        case CMD_TMF_STATUS:
                if (hpsa_evaluate_tmf_status(h, cp)) /* TMF failed? */
                        cmd->result = DID_ERROR << 16;
                break;
        case CMD_IOACCEL_DISABLED:
                /* This only handles the direct pass-through case since RAID
                 * offload is handled above.  Just attempt a retry.
                 */
                cmd->result = DID_SOFT_ERROR << 16;
                dev_warn(&h->pdev->dev,
                                "cp %p had HP SSD Smart Path error\n", cp);
                break;
        default:
                cmd->result = DID_ERROR << 16;
                dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n",
                                cp, ei->CommandStatus);
        }

        return hpsa_cmd_free_and_done(h, cp, cmd);
}

static void hpsa_pci_unmap(struct pci_dev *pdev, struct CommandList *c,
                int sg_used, enum dma_data_direction data_direction)
{
        int i;

        for (i = 0; i < sg_used; i++)
                dma_unmap_single(&pdev->dev, le64_to_cpu(c->SG[i].Addr),
                                le32_to_cpu(c->SG[i].Len),
                                data_direction);
}

static int hpsa_map_one(struct pci_dev *pdev,
                struct CommandList *cp,
                unsigned char *buf,
                size_t buflen,
                enum dma_data_direction data_direction)
{
        u64 addr64;

        if (buflen == 0 || data_direction == DMA_NONE) {
                cp->Header.SGList = 0;
                cp->Header.SGTotal = cpu_to_le16(0);
                return 0;
        }

        addr64 = dma_map_single(&pdev->dev, buf, buflen, data_direction);
        if (dma_mapping_error(&pdev->dev, addr64)) {
                /* Prevent subsequent unmap of something never mapped */
                cp->Header.SGList = 0;
                cp->Header.SGTotal = cpu_to_le16(0);
                return -1;
        }
        cp->SG[0].Addr = cpu_to_le64(addr64);
        cp->SG[0].Len = cpu_to_le32(buflen);
        cp->SG[0].Ext = cpu_to_le32(HPSA_SG_LAST); /* we are not chaining */
        cp->Header.SGList = 1;   /* no. SGs contig in this cmd */
        cp->Header.SGTotal = cpu_to_le16(1); /* total sgs in cmd list */
        return 0;
}

#define NO_TIMEOUT ((unsigned long) -1)
#define DEFAULT_TIMEOUT 30000 /* milliseconds */
static int hpsa_scsi_do_simple_cmd_core(struct ctlr_info *h,
        struct CommandList *c, int reply_queue, unsigned long timeout_msecs)
{
        DECLARE_COMPLETION_ONSTACK(wait);

        c->waiting = &wait;
        __enqueue_cmd_and_start_io(h, c, reply_queue);
        if (timeout_msecs == NO_TIMEOUT) {
                /* TODO: get rid of this no-timeout thing */
                wait_for_completion_io(&wait);
                return IO_OK;
        }
        if (!wait_for_completion_io_timeout(&wait,
                                        msecs_to_jiffies(timeout_msecs))) {
                dev_warn(&h->pdev->dev, "Command timed out.\n");
                return -ETIMEDOUT;
        }
        return IO_OK;
}

static int hpsa_scsi_do_simple_cmd(struct ctlr_info *h, struct CommandList *c,
                                   int reply_queue, unsigned long timeout_msecs)
{
        if (unlikely(lockup_detected(h))) {
                c->err_info->CommandStatus = CMD_CTLR_LOCKUP;
                return IO_OK;
        }
        return hpsa_scsi_do_simple_cmd_core(h, c, reply_queue, timeout_msecs);
}

static u32 lockup_detected(struct ctlr_info *h)
{
        int cpu;
        u32 rc, *lockup_detected;

        cpu = get_cpu();
        lockup_detected = per_cpu_ptr(h->lockup_detected, cpu);
        rc = *lockup_detected;
        put_cpu();
        return rc;
}

#define MAX_DRIVER_CMD_RETRIES 25
static int hpsa_scsi_do_simple_cmd_with_retry(struct ctlr_info *h,
                struct CommandList *c, enum dma_data_direction data_direction,
                unsigned long timeout_msecs)
{
        int backoff_time = 10, retry_count = 0;
        int rc;

        do {
                memset(c->err_info, 0, sizeof(*c->err_info));
                rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
                                                  timeout_msecs);
                if (rc)
                        break;
                retry_count++;
                if (retry_count > 3) {
                        msleep(backoff_time);
                        if (backoff_time < 1000)
                                backoff_time *= 2;
                }
        } while ((check_for_unit_attention(h, c) ||
                        check_for_busy(h, c)) &&
                        retry_count <= MAX_DRIVER_CMD_RETRIES);
        hpsa_pci_unmap(h->pdev, c, 1, data_direction);
        if (retry_count > MAX_DRIVER_CMD_RETRIES)
                rc = -EIO;
        return rc;
}

static void hpsa_print_cmd(struct ctlr_info *h, char *txt,
                                struct CommandList *c)
{
        const u8 *cdb = c->Request.CDB;
        const u8 *lun = c->Header.LUN.LunAddrBytes;

        dev_warn(&h->pdev->dev, "%s: LUN:%8phN CDB:%16phN\n",
                 txt, lun, cdb);
}

static void hpsa_scsi_interpret_error(struct ctlr_info *h,
                        struct CommandList *cp)
{
        const struct ErrorInfo *ei = cp->err_info;
        struct device *d = &cp->h->pdev->dev;
        u8 sense_key, asc, ascq;
        int sense_len;

        switch (ei->CommandStatus) {
        case CMD_TARGET_STATUS:
                if (ei->SenseLen > sizeof(ei->SenseInfo))
                        sense_len = sizeof(ei->SenseInfo);
                else
                        sense_len = ei->SenseLen;
                decode_sense_data(ei->SenseInfo, sense_len,
                                        &sense_key, &asc, &ascq);
                hpsa_print_cmd(h, "SCSI status", cp);
                if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION)
                        dev_warn(d, "SCSI Status = 02, Sense key = 0x%02x, ASC = 0x%02x, ASCQ = 0x%02x\n",
                                sense_key, asc, ascq);
                else
                        dev_warn(d, "SCSI Status = 0x%02x\n", ei->ScsiStatus);
                if (ei->ScsiStatus == 0)
                        dev_warn(d, "SCSI status is abnormally zero.  "
                        "(probably indicates selection timeout "
                        "reported incorrectly due to a known "
                        "firmware bug, circa July, 2001.)\n");
                break;
        case CMD_DATA_UNDERRUN: /* let mid layer handle it. */
                break;
        case CMD_DATA_OVERRUN:
                hpsa_print_cmd(h, "overrun condition", cp);
                break;
        case CMD_INVALID: {
                /* controller unfortunately reports SCSI passthru's
                 * to non-existent targets as invalid commands.
                 */
                hpsa_print_cmd(h, "invalid command", cp);
                dev_warn(d, "probably means device no longer present\n");
                }
                break;
        case CMD_PROTOCOL_ERR:
                hpsa_print_cmd(h, "protocol error", cp);
                break;
        case CMD_HARDWARE_ERR:
                hpsa_print_cmd(h, "hardware error", cp);
                break;
        case CMD_CONNECTION_LOST:
                hpsa_print_cmd(h, "connection lost", cp);
                break;
        case CMD_ABORTED:
                hpsa_print_cmd(h, "aborted", cp);
                break;
        case CMD_ABORT_FAILED:
                hpsa_print_cmd(h, "abort failed", cp);
                break;
        case CMD_UNSOLICITED_ABORT:
                hpsa_print_cmd(h, "unsolicited abort", cp);
                break;
        case CMD_TIMEOUT:
                hpsa_print_cmd(h, "timed out", cp);
                break;
        case CMD_UNABORTABLE:
                hpsa_print_cmd(h, "unabortable", cp);
                break;
        case CMD_CTLR_LOCKUP:
                hpsa_print_cmd(h, "controller lockup detected", cp);
                break;
        default:
                hpsa_print_cmd(h, "unknown status", cp);
                dev_warn(d, "Unknown command status %x\n",
                                ei->CommandStatus);
        }
}

static int hpsa_do_receive_diagnostic(struct ctlr_info *h, u8 *scsi3addr,
                                        u8 page, u8 *buf, size_t bufsize)
{
        int rc = IO_OK;
        struct CommandList *c;
        struct ErrorInfo *ei;

        c = cmd_alloc(h);
        if (fill_cmd(c, RECEIVE_DIAGNOSTIC, h, buf, bufsize,
                        page, scsi3addr, TYPE_CMD)) {
                rc = -1;
                goto out;
        }
        rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
                        NO_TIMEOUT);
        if (rc)
                goto out;
        ei = c->err_info;
        if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
                hpsa_scsi_interpret_error(h, c);
                rc = -1;
        }
out:
        cmd_free(h, c);
        return rc;
}

static u64 hpsa_get_enclosure_logical_identifier(struct ctlr_info *h,
                                                u8 *scsi3addr)
{
        u8 *buf;
        u64 sa = 0;
        int rc = 0;

        buf = kzalloc(1024, GFP_KERNEL);
        if (!buf)
                return 0;

        rc = hpsa_do_receive_diagnostic(h, scsi3addr, RECEIVE_DIAGNOSTIC,
                                        buf, 1024);

        if (rc)
                goto out;

        sa = get_unaligned_be64(buf+12);

out:
        kfree(buf);
        return sa;
}

static int hpsa_scsi_do_inquiry(struct ctlr_info *h, unsigned char *scsi3addr,
                        u16 page, unsigned char *buf,
                        unsigned char bufsize)
{
        int rc = IO_OK;
        struct CommandList *c;
        struct ErrorInfo *ei;

        c = cmd_alloc(h);

        if (fill_cmd(c, HPSA_INQUIRY, h, buf, bufsize,
                        page, scsi3addr, TYPE_CMD)) {
                rc = -1;
                goto out;
        }
        rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
                        NO_TIMEOUT);
        if (rc)
                goto out;
        ei = c->err_info;
        if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
                hpsa_scsi_interpret_error(h, c);
                rc = -1;
        }
out:
        cmd_free(h, c);
        return rc;
}

static int hpsa_send_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev,
        u8 reset_type, int reply_queue)
{
        int rc = IO_OK;
        struct CommandList *c;
        struct ErrorInfo *ei;

        c = cmd_alloc(h);
        c->device = dev;

        /* fill_cmd can't fail here, no data buffer to map. */
        (void) fill_cmd(c, reset_type, h, NULL, 0, 0, dev->scsi3addr, TYPE_MSG);
        rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
        if (rc) {
                dev_warn(&h->pdev->dev, "Failed to send reset command\n");
                goto out;
        }
        /* no unmap needed here because no data xfer. */

        ei = c->err_info;
        if (ei->CommandStatus != 0) {
                hpsa_scsi_interpret_error(h, c);
                rc = -1;
        }
out:
        cmd_free(h, c);
        return rc;
}

static bool hpsa_cmd_dev_match(struct ctlr_info *h, struct CommandList *c,
                               struct hpsa_scsi_dev_t *dev,
                               unsigned char *scsi3addr)
{
        int i;
        bool match = false;
        struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
        struct hpsa_tmf_struct *ac = (struct hpsa_tmf_struct *) c2;

        if (hpsa_is_cmd_idle(c))
                return false;

        switch (c->cmd_type) {
        case CMD_SCSI:
        case CMD_IOCTL_PEND:
                match = !memcmp(scsi3addr, &c->Header.LUN.LunAddrBytes,
                                sizeof(c->Header.LUN.LunAddrBytes));
                break;

        case CMD_IOACCEL1:
        case CMD_IOACCEL2:
                if (c->phys_disk == dev) {
                        /* HBA mode match */
                        match = true;
                } else {
                        /* Possible RAID mode -- check each phys dev. */
                        /* FIXME:  Do we need to take out a lock here?  If
                         * so, we could just call hpsa_get_pdisk_of_ioaccel2()
                         * instead. */
                        for (i = 0; i < dev->nphysical_disks && !match; i++) {
                                /* FIXME: an alternate test might be
                                 *
                                 * match = dev->phys_disk[i]->ioaccel_handle
                                 *              == c2->scsi_nexus;      */
                                match = dev->phys_disk[i] == c->phys_disk;
                        }
                }
                break;

        case IOACCEL2_TMF:
                for (i = 0; i < dev->nphysical_disks && !match; i++) {
                        match = dev->phys_disk[i]->ioaccel_handle ==
                                        le32_to_cpu(ac->it_nexus);
                }
                break;

        case 0:         /* The command is in the middle of being initialized. */
                match = false;
                break;

        default:
                dev_err(&h->pdev->dev, "unexpected cmd_type: %d\n",
                        c->cmd_type);
                BUG();
        }

        return match;
}

static int hpsa_do_reset(struct ctlr_info *h, struct hpsa_scsi_dev_t *dev,
        u8 reset_type, int reply_queue)
{
        int rc = 0;

        /* We can really only handle one reset at a time */
        if (mutex_lock_interruptible(&h->reset_mutex) == -EINTR) {
                dev_warn(&h->pdev->dev, "concurrent reset wait interrupted.\n");
                return -EINTR;
        }

        rc = hpsa_send_reset(h, dev, reset_type, reply_queue);
        if (!rc) {
                /* incremented by sending the reset request */
                atomic_dec(&dev->commands_outstanding);
                wait_event(h->event_sync_wait_queue,
                        atomic_read(&dev->commands_outstanding) <= 0 ||
                        lockup_detected(h));
        }

        if (unlikely(lockup_detected(h))) {
                dev_warn(&h->pdev->dev,
                         "Controller lockup detected during reset wait\n");
                rc = -ENODEV;
        }

        if (!rc)
                rc = wait_for_device_to_become_ready(h, dev->scsi3addr, 0);

        mutex_unlock(&h->reset_mutex);
        return rc;
}

static void hpsa_get_raid_level(struct ctlr_info *h,
        unsigned char *scsi3addr, unsigned char *raid_level)
{
        int rc;
        unsigned char *buf;

        *raid_level = RAID_UNKNOWN;
        buf = kzalloc(64, GFP_KERNEL);
        if (!buf)
                return;

        if (!hpsa_vpd_page_supported(h, scsi3addr,
                HPSA_VPD_LV_DEVICE_GEOMETRY))
                goto exit;

        rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE |
                HPSA_VPD_LV_DEVICE_GEOMETRY, buf, 64);

        if (rc == 0)
                *raid_level = buf[8];
        if (*raid_level > RAID_UNKNOWN)
                *raid_level = RAID_UNKNOWN;
exit:
        kfree(buf);
        return;
}

#define HPSA_MAP_DEBUG
#ifdef HPSA_MAP_DEBUG
static void hpsa_debug_map_buff(struct ctlr_info *h, int rc,
                                struct raid_map_data *map_buff)
{
        struct raid_map_disk_data *dd = &map_buff->data[0];
        int map, row, col;
        u16 map_cnt, row_cnt, disks_per_row;

        if (rc != 0)
                return;

        /* Show details only if debugging has been activated. */
        if (h->raid_offload_debug < 2)
                return;

        dev_info(&h->pdev->dev, "structure_size = %u\n",
                                le32_to_cpu(map_buff->structure_size));
        dev_info(&h->pdev->dev, "volume_blk_size = %u\n",
                        le32_to_cpu(map_buff->volume_blk_size));
        dev_info(&h->pdev->dev, "volume_blk_cnt = 0x%llx\n",
                        le64_to_cpu(map_buff->volume_blk_cnt));
        dev_info(&h->pdev->dev, "physicalBlockShift = %u\n",
                        map_buff->phys_blk_shift);
        dev_info(&h->pdev->dev, "parity_rotation_shift = %u\n",
                        map_buff->parity_rotation_shift);
        dev_info(&h->pdev->dev, "strip_size = %u\n",
                        le16_to_cpu(map_buff->strip_size));
        dev_info(&h->pdev->dev, "disk_starting_blk = 0x%llx\n",
                        le64_to_cpu(map_buff->disk_starting_blk));
        dev_info(&h->pdev->dev, "disk_blk_cnt = 0x%llx\n",
                        le64_to_cpu(map_buff->disk_blk_cnt));
        dev_info(&h->pdev->dev, "data_disks_per_row = %u\n",
                        le16_to_cpu(map_buff->data_disks_per_row));
        dev_info(&h->pdev->dev, "metadata_disks_per_row = %u\n",
                        le16_to_cpu(map_buff->metadata_disks_per_row));
        dev_info(&h->pdev->dev, "row_cnt = %u\n",
                        le16_to_cpu(map_buff->row_cnt));
        dev_info(&h->pdev->dev, "layout_map_count = %u\n",
                        le16_to_cpu(map_buff->layout_map_count));
        dev_info(&h->pdev->dev, "flags = 0x%x\n",
                        le16_to_cpu(map_buff->flags));
        dev_info(&h->pdev->dev, "encryption = %s\n",
                        le16_to_cpu(map_buff->flags) &
                        RAID_MAP_FLAG_ENCRYPT_ON ?  "ON" : "OFF");
        dev_info(&h->pdev->dev, "dekindex = %u\n",
                        le16_to_cpu(map_buff->dekindex));
        map_cnt = le16_to_cpu(map_buff->layout_map_count);
        for (map = 0; map < map_cnt; map++) {
                dev_info(&h->pdev->dev, "Map%u:\n", map);
                row_cnt = le16_to_cpu(map_buff->row_cnt);
                for (row = 0; row < row_cnt; row++) {
                        dev_info(&h->pdev->dev, "  Row%u:\n", row);
                        disks_per_row =
                                le16_to_cpu(map_buff->data_disks_per_row);
                        for (col = 0; col < disks_per_row; col++, dd++)
                                dev_info(&h->pdev->dev,
                                        "    D%02u: h=0x%04x xor=%u,%u\n",
                                        col, dd->ioaccel_handle,
                                        dd->xor_mult[0], dd->xor_mult[1]);
                        disks_per_row =
                                le16_to_cpu(map_buff->metadata_disks_per_row);
                        for (col = 0; col < disks_per_row; col++, dd++)
                                dev_info(&h->pdev->dev,
                                        "    M%02u: h=0x%04x xor=%u,%u\n",
                                        col, dd->ioaccel_handle,
                                        dd->xor_mult[0], dd->xor_mult[1]);
                }
        }
}
#else
static void hpsa_debug_map_buff(__attribute__((unused)) struct ctlr_info *h,
                        __attribute__((unused)) int rc,
                        __attribute__((unused)) struct raid_map_data *map_buff)
{
}
#endif

static int hpsa_get_raid_map(struct ctlr_info *h,
        unsigned char *scsi3addr, struct hpsa_scsi_dev_t *this_device)
{
        int rc = 0;
        struct CommandList *c;
        struct ErrorInfo *ei;

        c = cmd_alloc(h);

        if (fill_cmd(c, HPSA_GET_RAID_MAP, h, &this_device->raid_map,
                        sizeof(this_device->raid_map), 0,
                        scsi3addr, TYPE_CMD)) {
                dev_warn(&h->pdev->dev, "hpsa_get_raid_map fill_cmd failed\n");
                cmd_free(h, c);
                return -1;
        }
        rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
                        NO_TIMEOUT);
        if (rc)
                goto out;
        ei = c->err_info;
        if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
                hpsa_scsi_interpret_error(h, c);
                rc = -1;
                goto out;
        }
        cmd_free(h, c);

        /* @todo in the future, dynamically allocate RAID map memory */
        if (le32_to_cpu(this_device->raid_map.structure_size) >
                                sizeof(this_device->raid_map)) {
                dev_warn(&h->pdev->dev, "RAID map size is too large!\n");
                rc = -1;
        }
        hpsa_debug_map_buff(h, rc, &this_device->raid_map);
        return rc;
out:
        cmd_free(h, c);
        return rc;
}

static int hpsa_bmic_sense_subsystem_information(struct ctlr_info *h,
                unsigned char scsi3addr[], u16 bmic_device_index,
                struct bmic_sense_subsystem_info *buf, size_t bufsize)
{
        int rc = IO_OK;
        struct CommandList *c;
        struct ErrorInfo *ei;

        c = cmd_alloc(h);

        rc = fill_cmd(c, BMIC_SENSE_SUBSYSTEM_INFORMATION, h, buf, bufsize,
                0, RAID_CTLR_LUNID, TYPE_CMD);
        if (rc)
                goto out;

        c->Request.CDB[2] = bmic_device_index & 0xff;
        c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;

        rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
                        NO_TIMEOUT);
        if (rc)
                goto out;
        ei = c->err_info;
        if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
                hpsa_scsi_interpret_error(h, c);
                rc = -1;
        }
out:
        cmd_free(h, c);
        return rc;
}

static int hpsa_bmic_id_controller(struct ctlr_info *h,
        struct bmic_identify_controller *buf, size_t bufsize)
{
        int rc = IO_OK;
        struct CommandList *c;
        struct ErrorInfo *ei;

        c = cmd_alloc(h);

        rc = fill_cmd(c, BMIC_IDENTIFY_CONTROLLER, h, buf, bufsize,
                0, RAID_CTLR_LUNID, TYPE_CMD);
        if (rc)
                goto out;

        rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
                        NO_TIMEOUT);
        if (rc)
                goto out;
        ei = c->err_info;
        if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
                hpsa_scsi_interpret_error(h, c);
                rc = -1;
        }
out:
        cmd_free(h, c);
        return rc;
}

static int hpsa_bmic_id_physical_device(struct ctlr_info *h,
                unsigned char scsi3addr[], u16 bmic_device_index,
                struct bmic_identify_physical_device *buf, size_t bufsize)
{
        int rc = IO_OK;
        struct CommandList *c;
        struct ErrorInfo *ei;

        c = cmd_alloc(h);
        rc = fill_cmd(c, BMIC_IDENTIFY_PHYSICAL_DEVICE, h, buf, bufsize,
                0, RAID_CTLR_LUNID, TYPE_CMD);
        if (rc)
                goto out;

        c->Request.CDB[2] = bmic_device_index & 0xff;
        c->Request.CDB[9] = (bmic_device_index >> 8) & 0xff;

        hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
                                                NO_TIMEOUT);
        ei = c->err_info;
        if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
                hpsa_scsi_interpret_error(h, c);
                rc = -1;
        }
out:
        cmd_free(h, c);

        return rc;
}

/*
 * get enclosure information
 * struct ReportExtendedLUNdata *rlep - Used for BMIC drive number
 * struct hpsa_scsi_dev_t *encl_dev - device entry for enclosure
 * Uses id_physical_device to determine the box_index.
 */
static void hpsa_get_enclosure_info(struct ctlr_info *h,
                        unsigned char *scsi3addr,
                        struct ReportExtendedLUNdata *rlep, int rle_index,
                        struct hpsa_scsi_dev_t *encl_dev)
{
        int rc = -1;
        struct CommandList *c = NULL;
        struct ErrorInfo *ei = NULL;
        struct bmic_sense_storage_box_params *bssbp = NULL;
        struct bmic_identify_physical_device *id_phys = NULL;
        struct ext_report_lun_entry *rle;
        u16 bmic_device_index = 0;

        if (rle_index < 0 || rle_index >= HPSA_MAX_PHYS_LUN)
                return;

        rle = &rlep->LUN[rle_index];

        encl_dev->eli =
                hpsa_get_enclosure_logical_identifier(h, scsi3addr);

        bmic_device_index = GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]);

        if (encl_dev->target == -1 || encl_dev->lun == -1) {
                rc = IO_OK;
                goto out;
        }

        if (bmic_device_index == 0xFF00 || MASKED_DEVICE(&rle->lunid[0])) {
                rc = IO_OK;
                goto out;
        }

        bssbp = kzalloc_obj(*bssbp);
        if (!bssbp)
                goto out;

        id_phys = kzalloc_obj(*id_phys);
        if (!id_phys)
                goto out;

        rc = hpsa_bmic_id_physical_device(h, scsi3addr, bmic_device_index,
                                                id_phys, sizeof(*id_phys));
        if (rc) {
                dev_warn(&h->pdev->dev, "%s: id_phys failed %d bdi[0x%x]\n",
                        __func__, encl_dev->external, bmic_device_index);
                goto out;
        }

        c = cmd_alloc(h);

        rc = fill_cmd(c, BMIC_SENSE_STORAGE_BOX_PARAMS, h, bssbp,
                        sizeof(*bssbp), 0, RAID_CTLR_LUNID, TYPE_CMD);

        if (rc)
                goto out;

        if (id_phys->phys_connector[1] == 'E')
                c->Request.CDB[5] = id_phys->box_index;
        else
                c->Request.CDB[5] = 0;

        rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
                                                NO_TIMEOUT);
        if (rc)
                goto out;

        ei = c->err_info;
        if (ei->CommandStatus != 0 && ei->CommandStatus != CMD_DATA_UNDERRUN) {
                rc = -1;
                goto out;
        }

        encl_dev->box[id_phys->active_path_number] = bssbp->phys_box_on_port;
        memcpy(&encl_dev->phys_connector[id_phys->active_path_number],
                bssbp->phys_connector, sizeof(bssbp->phys_connector));

        rc = IO_OK;
out:
        kfree(bssbp);
        kfree(id_phys);

        if (c)
                cmd_free(h, c);

        if (rc != IO_OK)
                hpsa_show_dev_msg(KERN_INFO, h, encl_dev,
                        "Error, could not get enclosure information");
}

static u64 hpsa_get_sas_address_from_report_physical(struct ctlr_info *h,
                                                unsigned char *scsi3addr)
{
        struct ReportExtendedLUNdata *physdev;
        u32 nphysicals;
        u64 sa = 0;
        int i;

        physdev = kzalloc_obj(*physdev);
        if (!physdev)
                return 0;

        if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) {
                dev_err(&h->pdev->dev, "report physical LUNs failed.\n");
                kfree(physdev);
                return 0;
        }
        nphysicals = get_unaligned_be32(physdev->LUNListLength) / 24;

        for (i = 0; i < nphysicals; i++)
                if (!memcmp(&physdev->LUN[i].lunid[0], scsi3addr, 8)) {
                        sa = get_unaligned_be64(&physdev->LUN[i].wwid[0]);
                        break;
                }

        kfree(physdev);

        return sa;
}

static void hpsa_get_sas_address(struct ctlr_info *h, unsigned char *scsi3addr,
                                        struct hpsa_scsi_dev_t *dev)
{
        int rc;
        u64 sa = 0;

        if (is_hba_lunid(scsi3addr)) {
                struct bmic_sense_subsystem_info *ssi;

                ssi = kzalloc_obj(*ssi);
                if (!ssi)
                        return;

                rc = hpsa_bmic_sense_subsystem_information(h,
                                        scsi3addr, 0, ssi, sizeof(*ssi));
                if (rc == 0) {
                        sa = get_unaligned_be64(ssi->primary_world_wide_id);
                        h->sas_address = sa;
                }

                kfree(ssi);
        } else
                sa = hpsa_get_sas_address_from_report_physical(h, scsi3addr);

        dev->sas_address = sa;
}

static void hpsa_ext_ctrl_present(struct ctlr_info *h,
        struct ReportExtendedLUNdata *physdev)
{
        u32 nphysicals;
        int i;

        if (h->discovery_polling)
                return;

        nphysicals = (get_unaligned_be32(physdev->LUNListLength) / 24) + 1;

        for (i = 0; i < nphysicals; i++) {
                if (physdev->LUN[i].device_type ==
                        BMIC_DEVICE_TYPE_CONTROLLER
                        && !is_hba_lunid(physdev->LUN[i].lunid)) {
                        dev_info(&h->pdev->dev,
                                "External controller present, activate discovery polling and disable rld caching\n");
                        hpsa_disable_rld_caching(h);
                        h->discovery_polling = 1;
                        break;
                }
        }
}

/* Get a device id from inquiry page 0x83 */
static bool hpsa_vpd_page_supported(struct ctlr_info *h,
        unsigned char scsi3addr[], u8 page)
{
        int rc;
        int i;
        int pages;
        unsigned char *buf, bufsize;

        buf = kzalloc(256, GFP_KERNEL);
        if (!buf)
                return false;

        /* Get the size of the page list first */
        rc = hpsa_scsi_do_inquiry(h, scsi3addr,
                                VPD_PAGE | HPSA_VPD_SUPPORTED_PAGES,
                                buf, HPSA_VPD_HEADER_SZ);
        if (rc != 0)
                goto exit_unsupported;
        pages = buf[3];
        bufsize = min(pages + HPSA_VPD_HEADER_SZ, 255);

        /* Get the whole VPD page list */
        rc = hpsa_scsi_do_inquiry(h, scsi3addr,
                                VPD_PAGE | HPSA_VPD_SUPPORTED_PAGES,
                                buf, bufsize);
        if (rc != 0)
                goto exit_unsupported;

        pages = buf[3];
        for (i = 1; i <= pages; i++)
                if (buf[3 + i] == page)
                        goto exit_supported;
exit_unsupported:
        kfree(buf);
        return false;
exit_supported:
        kfree(buf);
        return true;
}

/*
 * Called during a scan operation.
 * Sets ioaccel status on the new device list, not the existing device list
 *
 * The device list used during I/O will be updated later in
 * adjust_hpsa_scsi_table.
 */
static void hpsa_get_ioaccel_status(struct ctlr_info *h,
        unsigned char *scsi3addr, struct hpsa_scsi_dev_t *this_device)
{
        int rc;
        unsigned char *buf;
        u8 ioaccel_status;

        this_device->offload_config = 0;
        this_device->offload_enabled = 0;
        this_device->offload_to_be_enabled = 0;

        buf = kzalloc(64, GFP_KERNEL);
        if (!buf)
                return;
        if (!hpsa_vpd_page_supported(h, scsi3addr, HPSA_VPD_LV_IOACCEL_STATUS))
                goto out;
        rc = hpsa_scsi_do_inquiry(h, scsi3addr,
                        VPD_PAGE | HPSA_VPD_LV_IOACCEL_STATUS, buf, 64);
        if (rc != 0)
                goto out;

#define IOACCEL_STATUS_BYTE 4
#define OFFLOAD_CONFIGURED_BIT 0x01
#define OFFLOAD_ENABLED_BIT 0x02
        ioaccel_status = buf[IOACCEL_STATUS_BYTE];
        this_device->offload_config =
                !!(ioaccel_status & OFFLOAD_CONFIGURED_BIT);
        if (this_device->offload_config) {
                bool offload_enabled =
                        !!(ioaccel_status & OFFLOAD_ENABLED_BIT);
                /*
                 * Check to see if offload can be enabled.
                 */
                if (offload_enabled) {
                        rc = hpsa_get_raid_map(h, scsi3addr, this_device);
                        if (rc) /* could not load raid_map */
                                goto out;
                        this_device->offload_to_be_enabled = 1;
                }
        }

out:
        kfree(buf);
        return;
}

/* Get the device id from inquiry page 0x83 */
static int hpsa_get_device_id(struct ctlr_info *h, unsigned char *scsi3addr,
        unsigned char *device_id, int index, int buflen)
{
        int rc;
        unsigned char *buf;

        /* Does controller have VPD for device id? */
        if (!hpsa_vpd_page_supported(h, scsi3addr, HPSA_VPD_LV_DEVICE_ID))
                return 1; /* not supported */

        buf = kzalloc(64, GFP_KERNEL);
        if (!buf)
                return -ENOMEM;

        rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE |
                                        HPSA_VPD_LV_DEVICE_ID, buf, 64);
        if (rc == 0) {
                if (buflen > 16)
                        buflen = 16;
                memcpy(device_id, &buf[8], buflen);
        }

        kfree(buf);

        return rc; /*0 - got id,  otherwise, didn't */
}

static int hpsa_scsi_do_report_luns(struct ctlr_info *h, int logical,
                void *buf, int bufsize,
                int extended_response)
{
        int rc = IO_OK;
        struct CommandList *c;
        unsigned char scsi3addr[8];
        struct ErrorInfo *ei;

        c = cmd_alloc(h);

        /* address the controller */
        memset(scsi3addr, 0, sizeof(scsi3addr));
        if (fill_cmd(c, logical ? HPSA_REPORT_LOG : HPSA_REPORT_PHYS, h,
                buf, bufsize, 0, scsi3addr, TYPE_CMD)) {
                rc = -EAGAIN;
                goto out;
        }
        if (extended_response)
                c->Request.CDB[1] = extended_response;
        rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
                        NO_TIMEOUT);
        if (rc)
                goto out;
        ei = c->err_info;
        if (ei->CommandStatus != 0 &&
            ei->CommandStatus != CMD_DATA_UNDERRUN) {
                hpsa_scsi_interpret_error(h, c);
                rc = -EIO;
        } else {
                struct ReportLUNdata *rld = buf;

                if (rld->extended_response_flag != extended_response) {
                        if (!h->legacy_board) {
                                dev_err(&h->pdev->dev,
                                        "report luns requested format %u, got %u\n",
                                        extended_response,
                                        rld->extended_response_flag);
                                rc = -EINVAL;
                        } else
                                rc = -EOPNOTSUPP;
                }
        }
out:
        cmd_free(h, c);
        return rc;
}

static inline int hpsa_scsi_do_report_phys_luns(struct ctlr_info *h,
                struct ReportExtendedLUNdata *buf, int bufsize)
{
        int rc;
        struct ReportLUNdata *lbuf;

        rc = hpsa_scsi_do_report_luns(h, 0, buf, bufsize,
                                      HPSA_REPORT_PHYS_EXTENDED);
        if (!rc || rc != -EOPNOTSUPP)
                return rc;

        /* REPORT PHYS EXTENDED is not supported */
        lbuf = kzalloc_obj(*lbuf);
        if (!lbuf)
                return -ENOMEM;

        rc = hpsa_scsi_do_report_luns(h, 0, lbuf, sizeof(*lbuf), 0);
        if (!rc) {
                int i;
                u32 nphys;

                /* Copy ReportLUNdata header */
                memcpy(buf, lbuf, 8);
                nphys = be32_to_cpu(*((__be32 *)lbuf->LUNListLength)) / 8;
                for (i = 0; i < nphys; i++)
                        memcpy(buf->LUN[i].lunid, lbuf->LUN[i], 8);
        }
        kfree(lbuf);
        return rc;
}

static inline int hpsa_scsi_do_report_log_luns(struct ctlr_info *h,
                struct ReportLUNdata *buf, int bufsize)
{
        return hpsa_scsi_do_report_luns(h, 1, buf, bufsize, 0);
}

static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device,
        int bus, int target, int lun)
{
        device->bus = bus;
        device->target = target;
        device->lun = lun;
}

/* Use VPD inquiry to get details of volume status */
static int hpsa_get_volume_status(struct ctlr_info *h,
                                        unsigned char scsi3addr[])
{
        int rc;
        int status;
        int size;
        unsigned char *buf;

        buf = kzalloc(64, GFP_KERNEL);
        if (!buf)
                return HPSA_VPD_LV_STATUS_UNSUPPORTED;

        /* Does controller have VPD for logical volume status? */
        if (!hpsa_vpd_page_supported(h, scsi3addr, HPSA_VPD_LV_STATUS))
                goto exit_failed;

        /* Get the size of the VPD return buffer */
        rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | HPSA_VPD_LV_STATUS,
                                        buf, HPSA_VPD_HEADER_SZ);
        if (rc != 0)
                goto exit_failed;
        size = buf[3];

        /* Now get the whole VPD buffer */
        rc = hpsa_scsi_do_inquiry(h, scsi3addr, VPD_PAGE | HPSA_VPD_LV_STATUS,
                                        buf, size + HPSA_VPD_HEADER_SZ);
        if (rc != 0)
                goto exit_failed;
        status = buf[4]; /* status byte */

        kfree(buf);
        return status;
exit_failed:
        kfree(buf);
        return HPSA_VPD_LV_STATUS_UNSUPPORTED;
}

/* Determine offline status of a volume.
 * Return either:
 *  0 (not offline)
 *  0xff (offline for unknown reasons)
 *  # (integer code indicating one of several NOT READY states
 *     describing why a volume is to be kept offline)
 */
static unsigned char hpsa_volume_offline(struct ctlr_info *h,
                                        unsigned char scsi3addr[])
{
        struct CommandList *c;
        unsigned char *sense;
        u8 sense_key, asc, ascq;
        int sense_len;
        int rc, ldstat = 0;
#define ASC_LUN_NOT_READY 0x04
#define ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS 0x04
#define ASCQ_LUN_NOT_READY_INITIALIZING_CMD_REQ 0x02

        c = cmd_alloc(h);

        (void) fill_cmd(c, TEST_UNIT_READY, h, NULL, 0, 0, scsi3addr, TYPE_CMD);
        rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
                                        NO_TIMEOUT);
        if (rc) {
                cmd_free(h, c);
                return HPSA_VPD_LV_STATUS_UNSUPPORTED;
        }
        sense = c->err_info->SenseInfo;
        if (c->err_info->SenseLen > sizeof(c->err_info->SenseInfo))
                sense_len = sizeof(c->err_info->SenseInfo);
        else
                sense_len = c->err_info->SenseLen;
        decode_sense_data(sense, sense_len, &sense_key, &asc, &ascq);
        cmd_free(h, c);

        /* Determine the reason for not ready state */
        ldstat = hpsa_get_volume_status(h, scsi3addr);

        /* Keep volume offline in certain cases: */
        switch (ldstat) {
        case HPSA_LV_FAILED:
        case HPSA_LV_UNDERGOING_ERASE:
        case HPSA_LV_NOT_AVAILABLE:
        case HPSA_LV_UNDERGOING_RPI:
        case HPSA_LV_PENDING_RPI:
        case HPSA_LV_ENCRYPTED_NO_KEY:
        case HPSA_LV_PLAINTEXT_IN_ENCRYPT_ONLY_CONTROLLER:
        case HPSA_LV_UNDERGOING_ENCRYPTION:
        case HPSA_LV_UNDERGOING_ENCRYPTION_REKEYING:
        case HPSA_LV_ENCRYPTED_IN_NON_ENCRYPTED_CONTROLLER:
                return ldstat;
        case HPSA_VPD_LV_STATUS_UNSUPPORTED:
                /* If VPD status page isn't available,
                 * use ASC/ASCQ to determine state
                 */
                if ((ascq == ASCQ_LUN_NOT_READY_FORMAT_IN_PROGRESS) ||
                        (ascq == ASCQ_LUN_NOT_READY_INITIALIZING_CMD_REQ))
                        return ldstat;
                break;
        default:
                break;
        }
        return HPSA_LV_OK;
}

static int hpsa_update_device_info(struct ctlr_info *h,
        unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device,
        unsigned char *is_OBDR_device)
{

#define OBDR_SIG_OFFSET 43
#define OBDR_TAPE_SIG "$DR-10"
#define OBDR_SIG_LEN (sizeof(OBDR_TAPE_SIG) - 1)
#define OBDR_TAPE_INQ_SIZE (OBDR_SIG_OFFSET + OBDR_SIG_LEN)

        unsigned char *inq_buff;
        unsigned char *obdr_sig;
        int rc = 0;

        inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL);
        if (!inq_buff) {
                rc = -ENOMEM;
                goto bail_out;
        }

        /* Do an inquiry to the device to see what it is. */
        if (hpsa_scsi_do_inquiry(h, scsi3addr, 0, inq_buff,
                (unsigned char) OBDR_TAPE_INQ_SIZE) != 0) {
                dev_err(&h->pdev->dev,
                        "%s: inquiry failed, device will be skipped.\n",
                        __func__);
                rc = HPSA_INQUIRY_FAILED;
                goto bail_out;
        }

        scsi_sanitize_inquiry_string(&inq_buff[8], 8);
        scsi_sanitize_inquiry_string(&inq_buff[16], 16);

        this_device->devtype = (inq_buff[0] & 0x1f);
        memcpy(this_device->scsi3addr, scsi3addr, 8);
        memcpy(this_device->vendor, &inq_buff[8],
                sizeof(this_device->vendor));
        memcpy(this_device->model, &inq_buff[16],
                sizeof(this_device->model));
        this_device->rev = inq_buff[2];
        memset(this_device->device_id, 0,
                sizeof(this_device->device_id));
        if (hpsa_get_device_id(h, scsi3addr, this_device->device_id, 8,
                sizeof(this_device->device_id)) < 0) {
                dev_err(&h->pdev->dev,
                        "hpsa%d: %s: can't get device id for [%d:%d:%d:%d]\t%s\t%.16s\n",
                        h->ctlr, __func__,
                        h->scsi_host->host_no,
                        this_device->bus, this_device->target,
                        this_device->lun,
                        scsi_device_type(this_device->devtype),
                        this_device->model);
                rc = HPSA_LV_FAILED;
                goto bail_out;
        }

        if ((this_device->devtype == TYPE_DISK ||
                this_device->devtype == TYPE_ZBC) &&
                is_logical_dev_addr_mode(scsi3addr)) {
                unsigned char volume_offline;

                hpsa_get_raid_level(h, scsi3addr, &this_device->raid_level);
                if (h->fw_support & MISC_FW_RAID_OFFLOAD_BASIC)
                        hpsa_get_ioaccel_status(h, scsi3addr, this_device);
                volume_offline = hpsa_volume_offline(h, scsi3addr);
                if (volume_offline == HPSA_VPD_LV_STATUS_UNSUPPORTED &&
                    h->legacy_board) {
                        /*
                         * Legacy boards might not support volume status
                         */
                        dev_info(&h->pdev->dev,
                                 "C0:T%d:L%d Volume status not available, assuming online.\n",
                                 this_device->target, this_device->lun);
                        volume_offline = 0;
                }
                this_device->volume_offline = volume_offline;
                if (volume_offline == HPSA_LV_FAILED) {
                        rc = HPSA_LV_FAILED;
                        dev_err(&h->pdev->dev,
                                "%s: LV failed, device will be skipped.\n",
                                __func__);
                        goto bail_out;
                }
        } else {
                this_device->raid_level = RAID_UNKNOWN;
                this_device->offload_config = 0;
                hpsa_turn_off_ioaccel_for_device(this_device);
                this_device->hba_ioaccel_enabled = 0;
                this_device->volume_offline = 0;
                this_device->queue_depth = h->nr_cmds;
        }

        if (this_device->external)
                this_device->queue_depth = EXTERNAL_QD;

        if (is_OBDR_device) {
                /* See if this is a One-Button-Disaster-Recovery device
                 * by looking for "$DR-10" at offset 43 in inquiry data.
                 */
                obdr_sig = &inq_buff[OBDR_SIG_OFFSET];
                *is_OBDR_device = (this_device->devtype == TYPE_ROM &&
                                        strncmp(obdr_sig, OBDR_TAPE_SIG,
                                                OBDR_SIG_LEN) == 0);
        }
        kfree(inq_buff);
        return 0;

bail_out:
        kfree(inq_buff);
        return rc;
}

/*
 * Helper function to assign bus, target, lun mapping of devices.
 * Logical drive target and lun are assigned at this time, but
 * physical device lun and target assignment are deferred (assigned
 * in hpsa_find_target_lun, called by hpsa_scsi_add_entry.)
*/
static void figure_bus_target_lun(struct ctlr_info *h,
        u8 *lunaddrbytes, struct hpsa_scsi_dev_t *device)
{
        u32 lunid = get_unaligned_le32(lunaddrbytes);

        if (!is_logical_dev_addr_mode(lunaddrbytes)) {
                /* physical device, target and lun filled in later */
                if (is_hba_lunid(lunaddrbytes)) {
                        int bus = HPSA_HBA_BUS;

                        if (!device->rev)
                                bus = HPSA_LEGACY_HBA_BUS;
                        hpsa_set_bus_target_lun(device,
                                        bus, 0, lunid & 0x3fff);
                } else
                        /* defer target, lun assignment for physical devices */
                        hpsa_set_bus_target_lun(device,
                                        HPSA_PHYSICAL_DEVICE_BUS, -1, -1);
                return;
        }
        /* It's a logical device */
        if (device->external) {
                hpsa_set_bus_target_lun(device,
                        HPSA_EXTERNAL_RAID_VOLUME_BUS, (lunid >> 16) & 0x3fff,
                        lunid & 0x00ff);
                return;
        }
        hpsa_set_bus_target_lun(device, HPSA_RAID_VOLUME_BUS,
                                0, lunid & 0x3fff);
}

static int  figure_external_status(struct ctlr_info *h, int raid_ctlr_position,
        int i, int nphysicals, int nlocal_logicals)
{
        /* In report logicals, local logicals are listed first,
        * then any externals.
        */
        int logicals_start = nphysicals + (raid_ctlr_position == 0);

        if (i == raid_ctlr_position)
                return 0;

        if (i < logicals_start)
                return 0;

        /* i is in logicals range, but still within local logicals */
        if ((i - nphysicals - (raid_ctlr_position == 0)) < nlocal_logicals)
                return 0;

        return 1; /* it's an external lun */
}

/*
 * Do CISS_REPORT_PHYS and CISS_REPORT_LOG.  Data is returned in physdev,
 * logdev.  The number of luns in physdev and logdev are returned in
 * *nphysicals and *nlogicals, respectively.
 * Returns 0 on success, -1 otherwise.
 */
static int hpsa_gather_lun_info(struct ctlr_info *h,
        struct ReportExtendedLUNdata *physdev, u32 *nphysicals,
        struct ReportLUNdata *logdev, u32 *nlogicals)
{
        if (hpsa_scsi_do_report_phys_luns(h, physdev, sizeof(*physdev))) {
                dev_err(&h->pdev->dev, "report physical LUNs failed.\n");
                return -1;
        }
        *nphysicals = be32_to_cpu(*((__be32 *)physdev->LUNListLength)) / 24;
        if (*nphysicals > HPSA_MAX_PHYS_LUN) {
                dev_warn(&h->pdev->dev, "maximum physical LUNs (%d) exceeded. %d LUNs ignored.\n",
                        HPSA_MAX_PHYS_LUN, *nphysicals - HPSA_MAX_PHYS_LUN);
                *nphysicals = HPSA_MAX_PHYS_LUN;
        }
        if (hpsa_scsi_do_report_log_luns(h, logdev, sizeof(*logdev))) {
                dev_err(&h->pdev->dev, "report logical LUNs failed.\n");
                return -1;
        }
        *nlogicals = be32_to_cpu(*((__be32 *) logdev->LUNListLength)) / 8;
        /* Reject Logicals in excess of our max capability. */
        if (*nlogicals > HPSA_MAX_LUN) {
                dev_warn(&h->pdev->dev,
                        "maximum logical LUNs (%d) exceeded.  "
                        "%d LUNs ignored.\n", HPSA_MAX_LUN,
                        *nlogicals - HPSA_MAX_LUN);
                *nlogicals = HPSA_MAX_LUN;
        }
        if (*nlogicals + *nphysicals > HPSA_MAX_PHYS_LUN) {
                dev_warn(&h->pdev->dev,
                        "maximum logical + physical LUNs (%d) exceeded. "
                        "%d LUNs ignored.\n", HPSA_MAX_PHYS_LUN,
                        *nphysicals + *nlogicals - HPSA_MAX_PHYS_LUN);
                *nlogicals = HPSA_MAX_PHYS_LUN - *nphysicals;
        }
        return 0;
}

static u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position,
        int i, int nphysicals, int nlogicals,
        struct ReportExtendedLUNdata *physdev_list,
        struct ReportLUNdata *logdev_list)
{
        /* Helper function, figure out where the LUN ID info is coming from
         * given index i, lists of physical and logical devices, where in
         * the list the raid controller is supposed to appear (first or last)
         */

        int logicals_start = nphysicals + (raid_ctlr_position == 0);
        int last_device = nphysicals + nlogicals + (raid_ctlr_position == 0);

        if (i == raid_ctlr_position)
                return RAID_CTLR_LUNID;

        if (i < logicals_start)
                return &physdev_list->LUN[i -
                                (raid_ctlr_position == 0)].lunid[0];

        if (i < last_device)
                return &logdev_list->LUN[i - nphysicals -
                        (raid_ctlr_position == 0)][0];
        BUG();
        return NULL;
}

/* get physical drive ioaccel handle and queue depth */
static void hpsa_get_ioaccel_drive_info(struct ctlr_info *h,
                struct hpsa_scsi_dev_t *dev,
                struct ReportExtendedLUNdata *rlep, int rle_index,
                struct bmic_identify_physical_device *id_phys)
{
        int rc;
        struct ext_report_lun_entry *rle;

        if (rle_index < 0 || rle_index >= HPSA_MAX_PHYS_LUN)
                return;

        rle = &rlep->LUN[rle_index];

        dev->ioaccel_handle = rle->ioaccel_handle;
        if ((rle->device_flags & 0x08) && dev->ioaccel_handle)
                dev->hba_ioaccel_enabled = 1;
        memset(id_phys, 0, sizeof(*id_phys));
        rc = hpsa_bmic_id_physical_device(h, &rle->lunid[0],
                        GET_BMIC_DRIVE_NUMBER(&rle->lunid[0]), id_phys,
                        sizeof(*id_phys));
        if (!rc)
                /* Reserve space for FW operations */
#define DRIVE_CMDS_RESERVED_FOR_FW 2
#define DRIVE_QUEUE_DEPTH 7
                dev->queue_depth =
                        le16_to_cpu(id_phys->current_queue_depth_limit) -
                                DRIVE_CMDS_RESERVED_FOR_FW;
        else
                dev->queue_depth = DRIVE_QUEUE_DEPTH; /* conservative */
}

static void hpsa_get_path_info(struct hpsa_scsi_dev_t *this_device,
        struct ReportExtendedLUNdata *rlep, int rle_index,
        struct bmic_identify_physical_device *id_phys)
{
        struct ext_report_lun_entry *rle;

        if (rle_index < 0 || rle_index >= HPSA_MAX_PHYS_LUN)
                return;

        rle = &rlep->LUN[rle_index];

        if ((rle->device_flags & 0x08) && this_device->ioaccel_handle)
                this_device->hba_ioaccel_enabled = 1;

        memcpy(&this_device->active_path_index,
                &id_phys->active_path_number,
                sizeof(this_device->active_path_index));
        memcpy(&this_device->path_map,
                &id_phys->redundant_path_present_map,
                sizeof(this_device->path_map));
        memcpy(&this_device->box,
                &id_phys->alternate_paths_phys_box_on_port,
                sizeof(this_device->box));
        memcpy(&this_device->phys_connector,
                &id_phys->alternate_paths_phys_connector,
                sizeof(this_device->phys_connector));
        memcpy(&this_device->bay,
                &id_phys->phys_bay_in_box,
                sizeof(this_device->bay));
}

/* get number of local logical disks. */
static int hpsa_set_local_logical_count(struct ctlr_info *h,
        struct bmic_identify_controller *id_ctlr,
        u32 *nlocals)
{
        int rc;

        if (!id_ctlr) {
                dev_warn(&h->pdev->dev, "%s: id_ctlr buffer is NULL.\n",
                        __func__);
                return -ENOMEM;
        }
        memset(id_ctlr, 0, sizeof(*id_ctlr));
        rc = hpsa_bmic_id_controller(h, id_ctlr, sizeof(*id_ctlr));
        if (!rc)
                if (id_ctlr->configured_logical_drive_count < 255)
                        *nlocals = id_ctlr->configured_logical_drive_count;
                else
                        *nlocals = le16_to_cpu(
                                        id_ctlr->extended_logical_unit_count);
        else
                *nlocals = -1;
        return rc;
}

static bool hpsa_is_disk_spare(struct ctlr_info *h, u8 *lunaddrbytes)
{
        struct bmic_identify_physical_device *id_phys;
        bool is_spare = false;
        int rc;

        id_phys = kzalloc_obj(*id_phys);
        if (!id_phys)
                return false;

        rc = hpsa_bmic_id_physical_device(h,
                                        lunaddrbytes,
                                        GET_BMIC_DRIVE_NUMBER(lunaddrbytes),
                                        id_phys, sizeof(*id_phys));
        if (rc == 0)
                is_spare = (id_phys->more_flags >> 6) & 0x01;

        kfree(id_phys);
        return is_spare;
}

#define RPL_DEV_FLAG_NON_DISK                           0x1
#define RPL_DEV_FLAG_UNCONFIG_DISK_REPORTING_SUPPORTED  0x2
#define RPL_DEV_FLAG_UNCONFIG_DISK                      0x4

#define BMIC_DEVICE_TYPE_ENCLOSURE  6

static bool hpsa_skip_device(struct ctlr_info *h, u8 *lunaddrbytes,
                                struct ext_report_lun_entry *rle)
{
        u8 device_flags;
        u8 device_type;

        if (!MASKED_DEVICE(lunaddrbytes))
                return false;

        device_flags = rle->device_flags;
        device_type = rle->device_type;

        if (device_flags & RPL_DEV_FLAG_NON_DISK) {
                if (device_type == BMIC_DEVICE_TYPE_ENCLOSURE)
                        return false;
                return true;
        }

        if (!(device_flags & RPL_DEV_FLAG_UNCONFIG_DISK_REPORTING_SUPPORTED))
                return false;

        if (device_flags & RPL_DEV_FLAG_UNCONFIG_DISK)
                return false;

        /*
         * Spares may be spun down, we do not want to
         * do an Inquiry to a RAID set spare drive as
         * that would have them spun up, that is a
         * performance hit because I/O to the RAID device
         * stops while the spin up occurs which can take
         * over 50 seconds.
         */
        if (hpsa_is_disk_spare(h, lunaddrbytes))
                return true;

        return false;
}

static void hpsa_update_scsi_devices(struct ctlr_info *h)
{
        /* the idea here is we could get notified
         * that some devices have changed, so we do a report
         * physical luns and report logical luns cmd, and adjust
         * our list of devices accordingly.
         *
         * The scsi3addr's of devices won't change so long as the
         * adapter is not reset.  That means we can rescan and
         * tell which devices we already know about, vs. new
         * devices, vs.  disappearing devices.
         */
        struct ReportExtendedLUNdata *physdev_list = NULL;
        struct ReportLUNdata *logdev_list = NULL;
        struct bmic_identify_physical_device *id_phys = NULL;
        struct bmic_identify_controller *id_ctlr = NULL;
        u32 nphysicals = 0;
        u32 nlogicals = 0;
        u32 nlocal_logicals = 0;
        u32 ndev_allocated = 0;
        struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
        int ncurrent = 0;
        int i, ndevs_to_allocate;
        int raid_ctlr_position;
        bool physical_device;

        currentsd = kzalloc_objs(*currentsd, HPSA_MAX_DEVICES);
        physdev_list = kzalloc_obj(*physdev_list);
        logdev_list = kzalloc_obj(*logdev_list);
        tmpdevice = kzalloc_obj(*tmpdevice);
        id_phys = kzalloc_obj(*id_phys);
        id_ctlr = kzalloc_obj(*id_ctlr);

        if (!currentsd || !physdev_list || !logdev_list ||
                !tmpdevice || !id_phys || !id_ctlr) {
                dev_err(&h->pdev->dev, "out of memory\n");
                goto out;
        }

        h->drv_req_rescan = 0; /* cancel scheduled rescan - we're doing it. */

        if (hpsa_gather_lun_info(h, physdev_list, &nphysicals,
                        logdev_list, &nlogicals)) {
                h->drv_req_rescan = 1;
                goto out;
        }

        /* Set number of local logicals (non PTRAID) */
        if (hpsa_set_local_logical_count(h, id_ctlr, &nlocal_logicals)) {
                dev_warn(&h->pdev->dev,
                        "%s: Can't determine number of local logical devices.\n",
                        __func__);
        }

        /* We might see up to the maximum number of logical and physical disks
         * plus external target devices, and a device for the local RAID
         * controller.
         */
        ndevs_to_allocate = nphysicals + nlogicals + MAX_EXT_TARGETS + 1;

        hpsa_ext_ctrl_present(h, physdev_list);

        /* Allocate the per device structures */
        for (i = 0; i < ndevs_to_allocate; i++) {
                if (i >= HPSA_MAX_DEVICES) {
                        dev_warn(&h->pdev->dev, "maximum devices (%d) exceeded."
                                "  %d devices ignored.\n", HPSA_MAX_DEVICES,
                                ndevs_to_allocate - HPSA_MAX_DEVICES);
                        break;
                }

                currentsd[i] = kzalloc_obj(*currentsd[i]);
                if (!currentsd[i]) {
                        h->drv_req_rescan = 1;
                        goto out;
                }
                ndev_allocated++;
        }

        if (is_scsi_rev_5(h))
                raid_ctlr_position = 0;
        else
                raid_ctlr_position = nphysicals + nlogicals;

        /* adjust our table of devices */
        for (i = 0; i < nphysicals + nlogicals + 1; i++) {
                u8 *lunaddrbytes, is_OBDR = 0;
                int rc = 0;
                int phys_dev_index = i - (raid_ctlr_position == 0);
                bool skip_device = false;

                memset(tmpdevice, 0, sizeof(*tmpdevice));

                physical_device = i < nphysicals + (raid_ctlr_position == 0);

                /* Figure out where the LUN ID info is coming from */
                lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position,
                        i, nphysicals, nlogicals, physdev_list, logdev_list);

                /* Determine if this is a lun from an external target array */
                tmpdevice->external =
                        figure_external_status(h, raid_ctlr_position, i,
                                                nphysicals, nlocal_logicals);

                /*
                 * Skip over some devices such as a spare.
                 */
                if (phys_dev_index >= 0 && !tmpdevice->external &&
                        physical_device) {
                        skip_device = hpsa_skip_device(h, lunaddrbytes,
                                        &physdev_list->LUN[phys_dev_index]);
                        if (skip_device)
                                continue;
                }

                /* Get device type, vendor, model, device id, raid_map */
                rc = hpsa_update_device_info(h, lunaddrbytes, tmpdevice,
                                                        &is_OBDR);
                if (rc == -ENOMEM) {
                        dev_warn(&h->pdev->dev,
                                "Out of memory, rescan deferred.\n");
                        h->drv_req_rescan = 1;
                        goto out;
                }
                if (rc) {
                        h->drv_req_rescan = 1;
                        continue;
                }

                figure_bus_target_lun(h, lunaddrbytes, tmpdevice);
                this_device = currentsd[ncurrent];

                *this_device = *tmpdevice;
                this_device->physical_device = physical_device;

                /*
                 * Expose all devices except for physical devices that
                 * are masked.
                 */
                if (MASKED_DEVICE(lunaddrbytes) && this_device->physical_device)
                        this_device->expose_device = 0;
                else
                        this_device->expose_device = 1;


                /*
                 * Get the SAS address for physical devices that are exposed.
                 */
                if (this_device->physical_device && this_device->expose_device)
                        hpsa_get_sas_address(h, lunaddrbytes, this_device);

                switch (this_device->devtype) {
                case TYPE_ROM:
                        /* We don't *really* support actual CD-ROM devices,
                         * just "One Button Disaster Recovery" tape drive
                         * which temporarily pretends to be a CD-ROM drive.
                         * So we check that the device is really an OBDR tape
                         * device by checking for "$DR-10" in bytes 43-48 of
                         * the inquiry data.
                         */
                        if (is_OBDR)
                                ncurrent++;
                        break;
                case TYPE_DISK:
                case TYPE_ZBC:
                        if (this_device->physical_device) {
                                /* The disk is in HBA mode. */
                                /* Never use RAID mapper in HBA mode. */
                                this_device->offload_enabled = 0;
                                hpsa_get_ioaccel_drive_info(h, this_device,
                                        physdev_list, phys_dev_index, id_phys);
                                hpsa_get_path_info(this_device,
                                        physdev_list, phys_dev_index, id_phys);
                        }
                        ncurrent++;
                        break;
                case TYPE_TAPE:
                case TYPE_MEDIUM_CHANGER:
                        ncurrent++;
                        break;
                case TYPE_ENCLOSURE:
                        if (!this_device->external)
                                hpsa_get_enclosure_info(h, lunaddrbytes,
                                                physdev_list, phys_dev_index,
                                                this_device);
                        ncurrent++;
                        break;
                case TYPE_RAID:
                        /* Only present the Smartarray HBA as a RAID controller.
                         * If it's a RAID controller other than the HBA itself
                         * (an external RAID controller, MSA500 or similar)
                         * don't present it.
                         */
                        if (!is_hba_lunid(lunaddrbytes))
                                break;
                        ncurrent++;
                        break;
                default:
                        break;
                }
                if (ncurrent >= HPSA_MAX_DEVICES)
                        break;
        }

        if (h->sas_host == NULL) {
                int rc = 0;

                rc = hpsa_add_sas_host(h);
                if (rc) {
                        dev_warn(&h->pdev->dev,
                                "Could not add sas host %d\n", rc);
                        goto out;
                }
        }

        adjust_hpsa_scsi_table(h, currentsd, ncurrent);
out:
        kfree(tmpdevice);
        for (i = 0; i < ndev_allocated; i++)
                kfree(currentsd[i]);
        kfree(currentsd);
        kfree(physdev_list);
        kfree(logdev_list);
        kfree(id_ctlr);
        kfree(id_phys);
}

static void hpsa_set_sg_descriptor(struct SGDescriptor *desc,
                                   struct scatterlist *sg)
{
        u64 addr64 = (u64) sg_dma_address(sg);
        unsigned int len = sg_dma_len(sg);

        desc->Addr = cpu_to_le64(addr64);
        desc->Len = cpu_to_le32(len);
        desc->Ext = 0;
}

/*
 * hpsa_scatter_gather takes a struct scsi_cmnd, (cmd), and does the pci
 * dma mapping  and fills in the scatter gather entries of the
 * hpsa command, cp.
 */
static int hpsa_scatter_gather(struct ctlr_info *h,
                struct CommandList *cp,
                struct scsi_cmnd *cmd)
{
        struct scatterlist *sg;
        int use_sg, i, sg_limit, chained;
        struct SGDescriptor *curr_sg;

        BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);

        use_sg = scsi_dma_map(cmd);
        if (use_sg < 0)
                return use_sg;

        if (!use_sg)
                goto sglist_finished;

        /*
         * If the number of entries is greater than the max for a single list,
         * then we have a chained list; we will set up all but one entry in the
         * first list (the last entry is saved for link information);
         * otherwise, we don't have a chained list and we'll set up at each of
         * the entries in the one list.
         */
        curr_sg = cp->SG;
        chained = use_sg > h->max_cmd_sg_entries;
        sg_limit = chained ? h->max_cmd_sg_entries - 1 : use_sg;
        scsi_for_each_sg(cmd, sg, sg_limit, i) {
                hpsa_set_sg_descriptor(curr_sg, sg);
                curr_sg++;
        }

        if (chained) {
                /*
                 * Continue with the chained list.  Set curr_sg to the chained
                 * list.  Modify the limit to the total count less the entries
                 * we've already set up.  Resume the scan at the list entry
                 * where the previous loop left off.
                 */
                curr_sg = h->cmd_sg_list[cp->cmdindex];
                sg_limit = use_sg - sg_limit;
                for_each_sg(sg, sg, sg_limit, i) {
                        hpsa_set_sg_descriptor(curr_sg, sg);
                        curr_sg++;
                }
        }

        /* Back the pointer up to the last entry and mark it as "last". */
        (curr_sg - 1)->Ext = cpu_to_le32(HPSA_SG_LAST);

        if (use_sg + chained > h->maxSG)
                h->maxSG = use_sg + chained;

        if (chained) {
                cp->Header.SGList = h->max_cmd_sg_entries;
                cp->Header.SGTotal = cpu_to_le16(use_sg + 1);
                if (hpsa_map_sg_chain_block(h, cp)) {
                        scsi_dma_unmap(cmd);
                        return -1;
                }
                return 0;
        }

sglist_finished:

        cp->Header.SGList = (u8) use_sg;   /* no. SGs contig in this cmd */
        cp->Header.SGTotal = cpu_to_le16(use_sg); /* total sgs in cmd list */
        return 0;
}

static inline void warn_zero_length_transfer(struct ctlr_info *h,
                                                u8 *cdb, int cdb_len,
                                                const char *func)
{
        dev_warn(&h->pdev->dev,
                 "%s: Blocking zero-length request: CDB:%*phN\n",
                 func, cdb_len, cdb);
}

#define IO_ACCEL_INELIGIBLE 1
/* zero-length transfers trigger hardware errors. */
static bool is_zero_length_transfer(u8 *cdb)
{
        u32 block_cnt;

        /* Block zero-length transfer sizes on certain commands. */
        switch (cdb[0]) {
        case READ_10:
        case WRITE_10:
        case VERIFY:            /* 0x2F */
        case WRITE_VERIFY:      /* 0x2E */
                block_cnt = get_unaligned_be16(&cdb[7]);
                break;
        case READ_12:
        case WRITE_12:
        case VERIFY_12: /* 0xAF */
        case WRITE_VERIFY_12:   /* 0xAE */
                block_cnt = get_unaligned_be32(&cdb[6]);
                break;
        case READ_16:
        case WRITE_16:
        case VERIFY_16:         /* 0x8F */
                block_cnt = get_unaligned_be32(&cdb[10]);
                break;
        default:
                return false;
        }

        return block_cnt == 0;
}

static int fixup_ioaccel_cdb(u8 *cdb, int *cdb_len)
{
        int is_write = 0;
        u32 block;
        u32 block_cnt;

        /* Perform some CDB fixups if needed using 10 byte reads/writes only */
        switch (cdb[0]) {
        case WRITE_6:
        case WRITE_12:
                is_write = 1;
                fallthrough;
        case READ_6:
        case READ_12:
                if (*cdb_len == 6) {
                        block = (((cdb[1] & 0x1F) << 16) |
                                (cdb[2] << 8) |
                                cdb[3]);
                        block_cnt = cdb[4];
                        if (block_cnt == 0)
                                block_cnt = 256;
                } else {
                        BUG_ON(*cdb_len != 12);
                        block = get_unaligned_be32(&cdb[2]);
                        block_cnt = get_unaligned_be32(&cdb[6]);
                }
                if (block_cnt > 0xffff)
                        return IO_ACCEL_INELIGIBLE;

                cdb[0] = is_write ? WRITE_10 : READ_10;
                cdb[1] = 0;
                cdb[2] = (u8) (block >> 24);
                cdb[3] = (u8) (block >> 16);
                cdb[4] = (u8) (block >> 8);
                cdb[5] = (u8) (block);
                cdb[6] = 0;
                cdb[7] = (u8) (block_cnt >> 8);
                cdb[8] = (u8) (block_cnt);
                cdb[9] = 0;
                *cdb_len = 10;
                break;
        }
        return 0;
}

static int hpsa_scsi_ioaccel1_queue_command(struct ctlr_info *h,
        struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
        u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk)
{
        struct scsi_cmnd *cmd = c->scsi_cmd;
        struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[c->cmdindex];
        unsigned int len;
        unsigned int total_len = 0;
        struct scatterlist *sg;
        u64 addr64;
        int use_sg, i;
        struct SGDescriptor *curr_sg;
        u32 control = IOACCEL1_CONTROL_SIMPLEQUEUE;

        /* TODO: implement chaining support */
        if (scsi_sg_count(cmd) > h->ioaccel_maxsg) {
                atomic_dec(&phys_disk->ioaccel_cmds_out);
                return IO_ACCEL_INELIGIBLE;
        }

        BUG_ON(cmd->cmd_len > IOACCEL1_IOFLAGS_CDBLEN_MAX);

        if (is_zero_length_transfer(cdb)) {
                warn_zero_length_transfer(h, cdb, cdb_len, __func__);
                atomic_dec(&phys_disk->ioaccel_cmds_out);
                return IO_ACCEL_INELIGIBLE;
        }

        if (fixup_ioaccel_cdb(cdb, &cdb_len)) {
                atomic_dec(&phys_disk->ioaccel_cmds_out);
                return IO_ACCEL_INELIGIBLE;
        }

        c->cmd_type = CMD_IOACCEL1;

        /* Adjust the DMA address to point to the accelerated command buffer */
        c->busaddr = (u32) h->ioaccel_cmd_pool_dhandle +
                                (c->cmdindex * sizeof(*cp));
        BUG_ON(c->busaddr & 0x0000007F);

        use_sg = scsi_dma_map(cmd);
        if (use_sg < 0) {
                atomic_dec(&phys_disk->ioaccel_cmds_out);
                return use_sg;
        }

        if (use_sg) {
                curr_sg = cp->SG;
                scsi_for_each_sg(cmd, sg, use_sg, i) {
                        addr64 = (u64) sg_dma_address(sg);
                        len  = sg_dma_len(sg);
                        total_len += len;
                        curr_sg->Addr = cpu_to_le64(addr64);
                        curr_sg->Len = cpu_to_le32(len);
                        curr_sg->Ext = cpu_to_le32(0);
                        curr_sg++;
                }
                (--curr_sg)->Ext = cpu_to_le32(HPSA_SG_LAST);

                switch (cmd->sc_data_direction) {
                case DMA_TO_DEVICE:
                        control |= IOACCEL1_CONTROL_DATA_OUT;
                        break;
                case DMA_FROM_DEVICE:
                        control |= IOACCEL1_CONTROL_DATA_IN;
                        break;
                case DMA_NONE:
                        control |= IOACCEL1_CONTROL_NODATAXFER;
                        break;
                default:
                        dev_err(&h->pdev->dev, "unknown data direction: %d\n",
                        cmd->sc_data_direction);
                        BUG();
                        break;
                }
        } else {
                control |= IOACCEL1_CONTROL_NODATAXFER;
        }

        c->Header.SGList = use_sg;
        /* Fill out the command structure to submit */
        cp->dev_handle = cpu_to_le16(ioaccel_handle & 0xFFFF);
        cp->transfer_len = cpu_to_le32(total_len);
        cp->io_flags = cpu_to_le16(IOACCEL1_IOFLAGS_IO_REQ |
                        (cdb_len & IOACCEL1_IOFLAGS_CDBLEN_MASK));
        cp->control = cpu_to_le32(control);
        memcpy(cp->CDB, cdb, cdb_len);
        memcpy(cp->CISS_LUN, scsi3addr, 8);
        /* Tag was already set at init time. */
        enqueue_cmd_and_start_io(h, c);
        return 0;
}

/*
 * Queue a command directly to a device behind the controller using the
 * I/O accelerator path.
 */
static int hpsa_scsi_ioaccel_direct_map(struct ctlr_info *h,
        struct CommandList *c)
{
        struct scsi_cmnd *cmd = c->scsi_cmd;
        struct hpsa_scsi_dev_t *dev = cmd->device->hostdata;

        if (!dev)
                return -1;

        c->phys_disk = dev;

        if (dev->in_reset)
                return -1;

        return hpsa_scsi_ioaccel_queue_command(h, c, dev->ioaccel_handle,
                cmd->cmnd, cmd->cmd_len, dev->scsi3addr, dev);
}

/*
 * Set encryption parameters for the ioaccel2 request
 */
static void set_encrypt_ioaccel2(struct ctlr_info *h,
        struct CommandList *c, struct io_accel2_cmd *cp)
{
        struct scsi_cmnd *cmd = c->scsi_cmd;
        struct hpsa_scsi_dev_t *dev = cmd->device->hostdata;
        struct raid_map_data *map = &dev->raid_map;
        u64 first_block;

        /* Are we doing encryption on this device */
        if (!(le16_to_cpu(map->flags) & RAID_MAP_FLAG_ENCRYPT_ON))
                return;
        /* Set the data encryption key index. */
        cp->dekindex = map->dekindex;

        /* Set the encryption enable flag, encoded into direction field. */
        cp->direction |= IOACCEL2_DIRECTION_ENCRYPT_MASK;

        /* Set encryption tweak values based on logical block address
         * If block size is 512, tweak value is LBA.
         * For other block sizes, tweak is (LBA * block size)/ 512)
         */
        switch (cmd->cmnd[0]) {
        /* Required? 6-byte cdbs eliminated by fixup_ioaccel_cdb */
        case READ_6:
        case WRITE_6:
                first_block = (((cmd->cmnd[1] & 0x1F) << 16) |
                                (cmd->cmnd[2] << 8) |
                                cmd->cmnd[3]);
                break;
        case WRITE_10:
        case READ_10:
        /* Required? 12-byte cdbs eliminated by fixup_ioaccel_cdb */
        case WRITE_12:
        case READ_12:
                first_block = get_unaligned_be32(&cmd->cmnd[2]);
                break;
        case WRITE_16:
        case READ_16:
                first_block = get_unaligned_be64(&cmd->cmnd[2]);
                break;
        default:
                dev_err(&h->pdev->dev,
                        "ERROR: %s: size (0x%x) not supported for encryption\n",
                        __func__, cmd->cmnd[0]);
                BUG();
                break;
        }

        if (le32_to_cpu(map->volume_blk_size) != 512)
                first_block = first_block *
                                le32_to_cpu(map->volume_blk_size)/512;

        cp->tweak_lower = cpu_to_le32(first_block);
        cp->tweak_upper = cpu_to_le32(first_block >> 32);
}

static int hpsa_scsi_ioaccel2_queue_command(struct ctlr_info *h,
        struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
        u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk)
{
        struct scsi_cmnd *cmd = c->scsi_cmd;
        struct io_accel2_cmd *cp = &h->ioaccel2_cmd_pool[c->cmdindex];
        struct ioaccel2_sg_element *curr_sg;
        int use_sg, i;
        struct scatterlist *sg;
        u64 addr64;
        u32 len;
        u32 total_len = 0;

        if (!cmd->device)
                return -1;

        if (!cmd->device->hostdata)
                return -1;

        BUG_ON(scsi_sg_count(cmd) > h->maxsgentries);

        if (is_zero_length_transfer(cdb)) {
                warn_zero_length_transfer(h, cdb, cdb_len, __func__);
                atomic_dec(&phys_disk->ioaccel_cmds_out);
                return IO_ACCEL_INELIGIBLE;
        }

        if (fixup_ioaccel_cdb(cdb, &cdb_len)) {
                atomic_dec(&phys_disk->ioaccel_cmds_out);
                return IO_ACCEL_INELIGIBLE;
        }

        c->cmd_type = CMD_IOACCEL2;
        /* Adjust the DMA address to point to the accelerated command buffer */
        c->busaddr = (u32) h->ioaccel2_cmd_pool_dhandle +
                                (c->cmdindex * sizeof(*cp));
        BUG_ON(c->busaddr & 0x0000007F);

        memset(cp, 0, sizeof(*cp));
        cp->IU_type = IOACCEL2_IU_TYPE;

        use_sg = scsi_dma_map(cmd);
        if (use_sg < 0) {
                atomic_dec(&phys_disk->ioaccel_cmds_out);
                return use_sg;
        }

        if (use_sg) {
                curr_sg = cp->sg;
                if (use_sg > h->ioaccel_maxsg) {
                        addr64 = le64_to_cpu(
                                h->ioaccel2_cmd_sg_list[c->cmdindex]->address);
                        curr_sg->address = cpu_to_le64(addr64);
                        curr_sg->length = 0;
                        curr_sg->reserved[0] = 0;
                        curr_sg->reserved[1] = 0;
                        curr_sg->reserved[2] = 0;
                        curr_sg->chain_indicator = IOACCEL2_CHAIN;

                        curr_sg = h->ioaccel2_cmd_sg_list[c->cmdindex];
                }
                scsi_for_each_sg(cmd, sg, use_sg, i) {
                        addr64 = (u64) sg_dma_address(sg);
                        len  = sg_dma_len(sg);
                        total_len += len;
                        curr_sg->address = cpu_to_le64(addr64);
                        curr_sg->length = cpu_to_le32(len);
                        curr_sg->reserved[0] = 0;
                        curr_sg->reserved[1] = 0;
                        curr_sg->reserved[2] = 0;
                        curr_sg->chain_indicator = 0;
                        curr_sg++;
                }

                /*
                 * Set the last s/g element bit
                 */
                (curr_sg - 1)->chain_indicator = IOACCEL2_LAST_SG;

                switch (cmd->sc_data_direction) {
                case DMA_TO_DEVICE:
                        cp->direction &= ~IOACCEL2_DIRECTION_MASK;
                        cp->direction |= IOACCEL2_DIR_DATA_OUT;
                        break;
                case DMA_FROM_DEVICE:
                        cp->direction &= ~IOACCEL2_DIRECTION_MASK;
                        cp->direction |= IOACCEL2_DIR_DATA_IN;
                        break;
                case DMA_NONE:
                        cp->direction &= ~IOACCEL2_DIRECTION_MASK;
                        cp->direction |= IOACCEL2_DIR_NO_DATA;
                        break;
                default:
                        dev_err(&h->pdev->dev, "unknown data direction: %d\n",
                                cmd->sc_data_direction);
                        BUG();
                        break;
                }
        } else {
                cp->direction &= ~IOACCEL2_DIRECTION_MASK;
                cp->direction |= IOACCEL2_DIR_NO_DATA;
        }

        /* Set encryption parameters, if necessary */
        set_encrypt_ioaccel2(h, c, cp);

        cp->scsi_nexus = cpu_to_le32(ioaccel_handle);
        cp->Tag = cpu_to_le32(c->cmdindex << DIRECT_LOOKUP_SHIFT);
        memcpy(cp->cdb, cdb, sizeof(cp->cdb));

        cp->data_len = cpu_to_le32(total_len);
        cp->err_ptr = cpu_to_le64(c->busaddr +
                        offsetof(struct io_accel2_cmd, error_data));
        cp->err_len = cpu_to_le32(sizeof(cp->error_data));

        /* fill in sg elements */
        if (use_sg > h->ioaccel_maxsg) {
                cp->sg_count = 1;
                cp->sg[0].length = cpu_to_le32(use_sg * sizeof(cp->sg[0]));
                if (hpsa_map_ioaccel2_sg_chain_block(h, cp, c)) {
                        atomic_dec(&phys_disk->ioaccel_cmds_out);
                        scsi_dma_unmap(cmd);
                        return -1;
                }
        } else
                cp->sg_count = (u8) use_sg;

        if (phys_disk->in_reset) {
                cmd->result = DID_RESET << 16;
                return -1;
        }

        enqueue_cmd_and_start_io(h, c);
        return 0;
}

/*
 * Queue a command to the correct I/O accelerator path.
 */
static int hpsa_scsi_ioaccel_queue_command(struct ctlr_info *h,
        struct CommandList *c, u32 ioaccel_handle, u8 *cdb, int cdb_len,
        u8 *scsi3addr, struct hpsa_scsi_dev_t *phys_disk)
{
        if (!c->scsi_cmd->device)
                return -1;

        if (!c->scsi_cmd->device->hostdata)
                return -1;

        if (phys_disk->in_reset)
                return -1;

        /* Try to honor the device's queue depth */
        if (atomic_inc_return(&phys_disk->ioaccel_cmds_out) >
                                        phys_disk->queue_depth) {
                atomic_dec(&phys_disk->ioaccel_cmds_out);
                return IO_ACCEL_INELIGIBLE;
        }
        if (h->transMethod & CFGTBL_Trans_io_accel1)
                return hpsa_scsi_ioaccel1_queue_command(h, c, ioaccel_handle,
                                                cdb, cdb_len, scsi3addr,
                                                phys_disk);
        else
                return hpsa_scsi_ioaccel2_queue_command(h, c, ioaccel_handle,
                                                cdb, cdb_len, scsi3addr,
                                                phys_disk);
}

static void raid_map_helper(struct raid_map_data *map,
                int offload_to_mirror, u32 *map_index, u32 *current_group)
{
        if (offload_to_mirror == 0)  {
                /* use physical disk in the first mirrored group. */
                *map_index %= le16_to_cpu(map->data_disks_per_row);
                return;
        }
        do {
                /* determine mirror group that *map_index indicates */
                *current_group = *map_index /
                        le16_to_cpu(map->data_disks_per_row);
                if (offload_to_mirror == *current_group)
                        continue;
                if (*current_group < le16_to_cpu(map->layout_map_count) - 1) {
                        /* select map index from next group */
                        *map_index += le16_to_cpu(map->data_disks_per_row);
                        (*current_group)++;
                } else {
                        /* select map index from first group */
                        *map_index %= le16_to_cpu(map->data_disks_per_row);
                        *current_group = 0;
                }
        } while (offload_to_mirror != *current_group);
}

/*
 * Attempt to perform offload RAID mapping for a logical volume I/O.
 */
static int hpsa_scsi_ioaccel_raid_map(struct ctlr_info *h,
        struct CommandList *c)
{
        struct scsi_cmnd *cmd = c->scsi_cmd;
        struct hpsa_scsi_dev_t *dev = cmd->device->hostdata;
        struct raid_map_data *map = &dev->raid_map;
        struct raid_map_disk_data *dd = &map->data[0];
        int is_write = 0;
        u32 map_index;
        u64 first_block, last_block;
        u32 block_cnt;
        u32 blocks_per_row;
        u64 first_row, last_row;
        u32 first_row_offset, last_row_offset;
        u32 first_column, last_column;
        u64 r0_first_row, r0_last_row;
        u32 r5or6_blocks_per_row;
        u64 r5or6_first_row, r5or6_last_row;
        u32 r5or6_first_row_offset, r5or6_last_row_offset;
        u32 r5or6_first_column, r5or6_last_column;
        u32 total_disks_per_row;
        u32 stripesize;
        u32 first_group, last_group, current_group;
        u32 map_row;
        u32 disk_handle;
        u64 disk_block;
        u32 disk_block_cnt;
        u8 cdb[16];
        u8 cdb_len;
        u16 strip_size;
#if BITS_PER_LONG == 32
        u64 tmpdiv;
#endif
        int offload_to_mirror;

        if (!dev)
                return -1;

        if (dev->in_reset)
                return -1;

        /* check for valid opcode, get LBA and block count */
        switch (cmd->cmnd[0]) {
        case WRITE_6:
                is_write = 1;
                fallthrough;
        case READ_6:
                first_block = (((cmd->cmnd[1] & 0x1F) << 16) |
                                (cmd->cmnd[2] << 8) |
                                cmd->cmnd[3]);
                block_cnt = cmd->cmnd[4];
                if (block_cnt == 0)
                        block_cnt = 256;
                break;
        case WRITE_10:
                is_write = 1;
                fallthrough;
        case READ_10:
                first_block =
                        (((u64) cmd->cmnd[2]) << 24) |
                        (((u64) cmd->cmnd[3]) << 16) |
                        (((u64) cmd->cmnd[4]) << 8) |
                        cmd->cmnd[5];
                block_cnt =
                        (((u32) cmd->cmnd[7]) << 8) |
                        cmd->cmnd[8];
                break;
        case WRITE_12:
                is_write = 1;
                fallthrough;
        case READ_12:
                first_block =
                        (((u64) cmd->cmnd[2]) << 24) |
                        (((u64) cmd->cmnd[3]) << 16) |
                        (((u64) cmd->cmnd[4]) << 8) |
                        cmd->cmnd[5];
                block_cnt =
                        (((u32) cmd->cmnd[6]) << 24) |
                        (((u32) cmd->cmnd[7]) << 16) |
                        (((u32) cmd->cmnd[8]) << 8) |
                cmd->cmnd[9];
                break;
        case WRITE_16:
                is_write = 1;
                fallthrough;
        case READ_16:
                first_block =
                        (((u64) cmd->cmnd[2]) << 56) |
                        (((u64) cmd->cmnd[3]) << 48) |
                        (((u64) cmd->cmnd[4]) << 40) |
                        (((u64) cmd->cmnd[5]) << 32) |
                        (((u64) cmd->cmnd[6]) << 24) |
                        (((u64) cmd->cmnd[7]) << 16) |
                        (((u64) cmd->cmnd[8]) << 8) |
                        cmd->cmnd[9];
                block_cnt =
                        (((u32) cmd->cmnd[10]) << 24) |
                        (((u32) cmd->cmnd[11]) << 16) |
                        (((u32) cmd->cmnd[12]) << 8) |
                        cmd->cmnd[13];
                break;
        default:
                return IO_ACCEL_INELIGIBLE; /* process via normal I/O path */
        }
        last_block = first_block + block_cnt - 1;

        /* check for write to non-RAID-0 */
        if (is_write && dev->raid_level != 0)
                return IO_ACCEL_INELIGIBLE;

        /* check for invalid block or wraparound */
        if (last_block >= le64_to_cpu(map->volume_blk_cnt) ||
                last_block < first_block)
                return IO_ACCEL_INELIGIBLE;

        /* calculate stripe information for the request */
        blocks_per_row = le16_to_cpu(map->data_disks_per_row) *
                                le16_to_cpu(map->strip_size);
        strip_size = le16_to_cpu(map->strip_size);
#if BITS_PER_LONG == 32
        tmpdiv = first_block;
        (void) do_div(tmpdiv, blocks_per_row);
        first_row = tmpdiv;
        tmpdiv = last_block;
        (void) do_div(tmpdiv, blocks_per_row);
        last_row = tmpdiv;
        first_row_offset = (u32) (first_block - (first_row * blocks_per_row));
        last_row_offset = (u32) (last_block - (last_row * blocks_per_row));
        tmpdiv = first_row_offset;
        (void) do_div(tmpdiv, strip_size);
        first_column = tmpdiv;
        tmpdiv = last_row_offset;
        (void) do_div(tmpdiv, strip_size);
        last_column = tmpdiv;
#else
        first_row = first_block / blocks_per_row;
        last_row = last_block / blocks_per_row;
        first_row_offset = (u32) (first_block - (first_row * blocks_per_row));
        last_row_offset = (u32) (last_block - (last_row * blocks_per_row));
        first_column = first_row_offset / strip_size;
        last_column = last_row_offset / strip_size;
#endif

        /* if this isn't a single row/column then give to the controller */
        if ((first_row != last_row) || (first_column != last_column))
                return IO_ACCEL_INELIGIBLE;

        /* proceeding with driver mapping */
        total_disks_per_row = le16_to_cpu(map->data_disks_per_row) +
                                le16_to_cpu(map->metadata_disks_per_row);
        map_row = ((u32)(first_row >> map->parity_rotation_shift)) %
                                le16_to_cpu(map->row_cnt);
        map_index = (map_row * total_disks_per_row) + first_column;

        switch (dev->raid_level) {
        case HPSA_RAID_0:
                break; /* nothing special to do */
        case HPSA_RAID_1:
                /* Handles load balance across RAID 1 members.
                 * (2-drive R1 and R10 with even # of drives.)
                 * Appropriate for SSDs, not optimal for HDDs
                 * Ensure we have the correct raid_map.
                 */
                if (le16_to_cpu(map->layout_map_count) != 2) {
                        hpsa_turn_off_ioaccel_for_device(dev);
                        return IO_ACCEL_INELIGIBLE;
                }
                if (dev->offload_to_mirror)
                        map_index += le16_to_cpu(map->data_disks_per_row);
                dev->offload_to_mirror = !dev->offload_to_mirror;
                break;
        case HPSA_RAID_ADM:
                /* Handles N-way mirrors  (R1-ADM)
                 * and R10 with # of drives divisible by 3.)
                 * Ensure we have the correct raid_map.
                 */
                if (le16_to_cpu(map->layout_map_count) != 3) {
                        hpsa_turn_off_ioaccel_for_device(dev);
                        return IO_ACCEL_INELIGIBLE;
                }

                offload_to_mirror = dev->offload_to_mirror;
                raid_map_helper(map, offload_to_mirror,
                                &map_index, &current_group);
                /* set mirror group to use next time */
                offload_to_mirror =
                        (offload_to_mirror >=
                        le16_to_cpu(map->layout_map_count) - 1)
                        ? 0 : offload_to_mirror + 1;
                dev->offload_to_mirror = offload_to_mirror;
                /* Avoid direct use of dev->offload_to_mirror within this
                 * function since multiple threads might simultaneously
                 * increment it beyond the range of dev->layout_map_count -1.
                 */
                break;
        case HPSA_RAID_5:
        case HPSA_RAID_6:
                if (le16_to_cpu(map->layout_map_count) <= 1)
                        break;

                /* Verify first and last block are in same RAID group */
                r5or6_blocks_per_row =
                        le16_to_cpu(map->strip_size) *
                        le16_to_cpu(map->data_disks_per_row);
                if (r5or6_blocks_per_row == 0) {
                        hpsa_turn_off_ioaccel_for_device(dev);
                        return IO_ACCEL_INELIGIBLE;
                }
                stripesize = r5or6_blocks_per_row *
                        le16_to_cpu(map->layout_map_count);
#if BITS_PER_LONG == 32
                tmpdiv = first_block;
                first_group = do_div(tmpdiv, stripesize);
                tmpdiv = first_group;
                (void) do_div(tmpdiv, r5or6_blocks_per_row);
                first_group = tmpdiv;
                tmpdiv = last_block;
                last_group = do_div(tmpdiv, stripesize);
                tmpdiv = last_group;
                (void) do_div(tmpdiv, r5or6_blocks_per_row);
                last_group = tmpdiv;
#else
                first_group = (first_block % stripesize) / r5or6_blocks_per_row;
                last_group = (last_block % stripesize) / r5or6_blocks_per_row;
#endif
                if (first_group != last_group)
                        return IO_ACCEL_INELIGIBLE;

                /* Verify request is in a single row of RAID 5/6 */
#if BITS_PER_LONG == 32
                tmpdiv = first_block;
                (void) do_div(tmpdiv, stripesize);
                first_row = r5or6_first_row = r0_first_row = tmpdiv;
                tmpdiv = last_block;
                (void) do_div(tmpdiv, stripesize);
                r5or6_last_row = r0_last_row = tmpdiv;
#else
                first_row = r5or6_first_row = r0_first_row =
                                                first_block / stripesize;
                r5or6_last_row = r0_last_row = last_block / stripesize;
#endif
                if (r5or6_first_row != r5or6_last_row)
                        return IO_ACCEL_INELIGIBLE;


                /* Verify request is in a single column */
#if BITS_PER_LONG == 32
                tmpdiv = first_block;
                first_row_offset = do_div(tmpdiv, stripesize);
                tmpdiv = first_row_offset;
                first_row_offset = (u32) do_div(tmpdiv, r5or6_blocks_per_row);
                r5or6_first_row_offset = first_row_offset;
                tmpdiv = last_block;
                r5or6_last_row_offset = do_div(tmpdiv, stripesize);
                tmpdiv = r5or6_last_row_offset;
                r5or6_last_row_offset = do_div(tmpdiv, r5or6_blocks_per_row);
                tmpdiv = r5or6_first_row_offset;
                (void) do_div(tmpdiv, map->strip_size);
                first_column = r5or6_first_column = tmpdiv;
                tmpdiv = r5or6_last_row_offset;
                (void) do_div(tmpdiv, map->strip_size);
                r5or6_last_column = tmpdiv;
#else
                first_row_offset = r5or6_first_row_offset =
                        (u32)((first_block % stripesize) %
                                                r5or6_blocks_per_row);

                r5or6_last_row_offset =
                        (u32)((last_block % stripesize) %
                                                r5or6_blocks_per_row);

                first_column = r5or6_first_column =
                        r5or6_first_row_offset / le16_to_cpu(map->strip_size);
                r5or6_last_column =
                        r5or6_last_row_offset / le16_to_cpu(map->strip_size);
#endif
                if (r5or6_first_column != r5or6_last_column)
                        return IO_ACCEL_INELIGIBLE;

                /* Request is eligible */
                map_row = ((u32)(first_row >> map->parity_rotation_shift)) %
                        le16_to_cpu(map->row_cnt);

                map_index = (first_group *
                        (le16_to_cpu(map->row_cnt) * total_disks_per_row)) +
                        (map_row * total_disks_per_row) + first_column;
                break;
        default:
                return IO_ACCEL_INELIGIBLE;
        }

        if (unlikely(map_index >= RAID_MAP_MAX_ENTRIES))
                return IO_ACCEL_INELIGIBLE;

        c->phys_disk = dev->phys_disk[map_index];
        if (!c->phys_disk)
                return IO_ACCEL_INELIGIBLE;

        disk_handle = dd[map_index].ioaccel_handle;
        disk_block = le64_to_cpu(map->disk_starting_blk) +
                        first_row * le16_to_cpu(map->strip_size) +
                        (first_row_offset - first_column *
                        le16_to_cpu(map->strip_size));
        disk_block_cnt = block_cnt;

        /* handle differing logical/physical block sizes */
        if (map->phys_blk_shift) {
                disk_block <<= map->phys_blk_shift;
                disk_block_cnt <<= map->phys_blk_shift;
        }
        BUG_ON(disk_block_cnt > 0xffff);

        /* build the new CDB for the physical disk I/O */
        if (disk_block > 0xffffffff) {
                cdb[0] = is_write ? WRITE_16 : READ_16;
                cdb[1] = 0;
                cdb[2] = (u8) (disk_block >> 56);
                cdb[3] = (u8) (disk_block >> 48);
                cdb[4] = (u8) (disk_block >> 40);
                cdb[5] = (u8) (disk_block >> 32);
                cdb[6] = (u8) (disk_block >> 24);
                cdb[7] = (u8) (disk_block >> 16);
                cdb[8] = (u8) (disk_block >> 8);
                cdb[9] = (u8) (disk_block);
                cdb[10] = (u8) (disk_block_cnt >> 24);
                cdb[11] = (u8) (disk_block_cnt >> 16);
                cdb[12] = (u8) (disk_block_cnt >> 8);
                cdb[13] = (u8) (disk_block_cnt);
                cdb[14] = 0;
                cdb[15] = 0;
                cdb_len = 16;
        } else {
                cdb[0] = is_write ? WRITE_10 : READ_10;
                cdb[1] = 0;
                cdb[2] = (u8) (disk_block >> 24);
                cdb[3] = (u8) (disk_block >> 16);
                cdb[4] = (u8) (disk_block >> 8);
                cdb[5] = (u8) (disk_block);
                cdb[6] = 0;
                cdb[7] = (u8) (disk_block_cnt >> 8);
                cdb[8] = (u8) (disk_block_cnt);
                cdb[9] = 0;
                cdb_len = 10;
        }
        return hpsa_scsi_ioaccel_queue_command(h, c, disk_handle, cdb, cdb_len,
                                                dev->scsi3addr,
                                                dev->phys_disk[map_index]);
}

/*
 * Submit commands down the "normal" RAID stack path
 * All callers to hpsa_ciss_submit must check lockup_detected
 * beforehand, before (opt.) and after calling cmd_alloc
 */
static int hpsa_ciss_submit(struct ctlr_info *h,
        struct CommandList *c, struct scsi_cmnd *cmd,
        struct hpsa_scsi_dev_t *dev)
{
        cmd->host_scribble = (unsigned char *) c;
        c->cmd_type = CMD_SCSI;
        c->scsi_cmd = cmd;
        c->Header.ReplyQueue = 0;  /* unused in simple mode */
        memcpy(&c->Header.LUN.LunAddrBytes[0], &dev->scsi3addr[0], 8);
        c->Header.tag = cpu_to_le64((c->cmdindex << DIRECT_LOOKUP_SHIFT));

        /* Fill in the request block... */

        c->Request.Timeout = 0;
        BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB));
        c->Request.CDBLen = cmd->cmd_len;
        memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len);
        switch (cmd->sc_data_direction) {
        case DMA_TO_DEVICE:
                c->Request.type_attr_dir =
                        TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_WRITE);
                break;
        case DMA_FROM_DEVICE:
                c->Request.type_attr_dir =
                        TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_READ);
                break;
        case DMA_NONE:
                c->Request.type_attr_dir =
                        TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_NONE);
                break;
        case DMA_BIDIRECTIONAL:
                /* This can happen if a buggy application does a scsi passthru
                 * and sets both inlen and outlen to non-zero. ( see
                 * ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() )
                 */

                c->Request.type_attr_dir =
                        TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_RSVD);
                /* This is technically wrong, and hpsa controllers should
                 * reject it with CMD_INVALID, which is the most correct
                 * response, but non-fibre backends appear to let it
                 * slide by, and give the same results as if this field
                 * were set correctly.  Either way is acceptable for
                 * our purposes here.
                 */

                break;

        default:
                dev_err(&h->pdev->dev, "unknown data direction: %d\n",
                        cmd->sc_data_direction);
                BUG();
                break;
        }

        if (hpsa_scatter_gather(h, c, cmd) < 0) { /* Fill SG list */
                hpsa_cmd_resolve_and_free(h, c);
                return SCSI_MLQUEUE_HOST_BUSY;
        }

        if (dev->in_reset) {
                hpsa_cmd_resolve_and_free(h, c);
                return SCSI_MLQUEUE_HOST_BUSY;
        }

        c->device = dev;

        enqueue_cmd_and_start_io(h, c);
        /* the cmd'll come back via intr handler in complete_scsi_command()  */
        return 0;
}

static void hpsa_cmd_init(struct ctlr_info *h, int index,
                                struct CommandList *c)
{
        dma_addr_t cmd_dma_handle, err_dma_handle;

        /* Zero out all of commandlist except the last field, refcount */
        memset(c, 0, offsetof(struct CommandList, refcount));
        c->Header.tag = cpu_to_le64((u64) (index << DIRECT_LOOKUP_SHIFT));
        cmd_dma_handle = h->cmd_pool_dhandle + index * sizeof(*c);
        c->err_info = h->errinfo_pool + index;
        memset(c->err_info, 0, sizeof(*c->err_info));
        err_dma_handle = h->errinfo_pool_dhandle
            + index * sizeof(*c->err_info);
        c->cmdindex = index;
        c->busaddr = (u32) cmd_dma_handle;
        c->ErrDesc.Addr = cpu_to_le64((u64) err_dma_handle);
        c->ErrDesc.Len = cpu_to_le32((u32) sizeof(*c->err_info));
        c->h = h;
        c->scsi_cmd = SCSI_CMD_IDLE;
}

static void hpsa_preinitialize_commands(struct ctlr_info *h)
{
        int i;

        for (i = 0; i < h->nr_cmds; i++) {
                struct CommandList *c = h->cmd_pool + i;

                hpsa_cmd_init(h, i, c);
                atomic_set(&c->refcount, 0);
        }
}

static inline void hpsa_cmd_partial_init(struct ctlr_info *h, int index,
                                struct CommandList *c)
{
        dma_addr_t cmd_dma_handle = h->cmd_pool_dhandle + index * sizeof(*c);

        BUG_ON(c->cmdindex != index);

        memset(c->Request.CDB, 0, sizeof(c->Request.CDB));
        memset(c->err_info, 0, sizeof(*c->err_info));
        c->busaddr = (u32) cmd_dma_handle;
}

static int hpsa_ioaccel_submit(struct ctlr_info *h,
                struct CommandList *c, struct scsi_cmnd *cmd,
                bool retry)
{
        struct hpsa_scsi_dev_t *dev = cmd->device->hostdata;
        int rc = IO_ACCEL_INELIGIBLE;

        if (!dev)
                return SCSI_MLQUEUE_HOST_BUSY;

        if (dev->in_reset)
                return SCSI_MLQUEUE_HOST_BUSY;

        if (hpsa_simple_mode)
                return IO_ACCEL_INELIGIBLE;

        cmd->host_scribble = (unsigned char *) c;

        if (dev->offload_enabled) {
                hpsa_cmd_init(h, c->cmdindex, c); /* Zeroes out all fields */
                c->cmd_type = CMD_SCSI;
                c->scsi_cmd = cmd;
                c->device = dev;
                if (retry) /* Resubmit but do not increment device->commands_outstanding. */
                        c->retry_pending = true;
                rc = hpsa_scsi_ioaccel_raid_map(h, c);
                if (rc < 0)     /* scsi_dma_map failed. */
                        rc = SCSI_MLQUEUE_HOST_BUSY;
        } else if (dev->hba_ioaccel_enabled) {
                hpsa_cmd_init(h, c->cmdindex, c); /* Zeroes out all fields */
                c->cmd_type = CMD_SCSI;
                c->scsi_cmd = cmd;
                c->device = dev;
                if (retry) /* Resubmit but do not increment device->commands_outstanding. */
                        c->retry_pending = true;
                rc = hpsa_scsi_ioaccel_direct_map(h, c);
                if (rc < 0)     /* scsi_dma_map failed. */
                        rc = SCSI_MLQUEUE_HOST_BUSY;
        }
        return rc;
}

static void hpsa_command_resubmit_worker(struct work_struct *work)
{
        struct scsi_cmnd *cmd;
        struct hpsa_scsi_dev_t *dev;
        struct CommandList *c = container_of(work, struct CommandList, work);

        cmd = c->scsi_cmd;
        dev = cmd->device->hostdata;
        if (!dev) {
                cmd->result = DID_NO_CONNECT << 16;
                return hpsa_cmd_free_and_done(c->h, c, cmd);
        }

        if (dev->in_reset) {
                cmd->result = DID_RESET << 16;
                return hpsa_cmd_free_and_done(c->h, c, cmd);
        }

        if (c->cmd_type == CMD_IOACCEL2) {
                struct ctlr_info *h = c->h;
                struct io_accel2_cmd *c2 = &h->ioaccel2_cmd_pool[c->cmdindex];
                int rc;

                if (c2->error_data.serv_response ==
                                IOACCEL2_STATUS_SR_TASK_COMP_SET_FULL) {
                        /* Resubmit with the retry_pending flag set. */
                        rc = hpsa_ioaccel_submit(h, c, cmd, true);
                        if (rc == 0)
                                return;
                        if (rc == SCSI_MLQUEUE_HOST_BUSY) {
                                /*
                                 * If we get here, it means dma mapping failed.
                                 * Try again via scsi mid layer, which will
                                 * then get SCSI_MLQUEUE_HOST_BUSY.
                                 */
                                cmd->result = DID_IMM_RETRY << 16;
                                return hpsa_cmd_free_and_done(h, c, cmd);
                        }
                        /* else, fall thru and resubmit down CISS path */
                }
        }
        hpsa_cmd_partial_init(c->h, c->cmdindex, c);
        /*
         * Here we have not come in though queue_command, so we
         * can set the retry_pending flag to true for a driver initiated
         * retry attempt (I.E. not a SML retry).
         * I.E. We are submitting a driver initiated retry.
         * Note: hpsa_ciss_submit does not zero out the command fields like
         *       ioaccel submit does.
         */
        c->retry_pending = true;
        if (hpsa_ciss_submit(c->h, c, cmd, dev)) {
                /*
                 * If we get here, it means dma mapping failed. Try
                 * again via scsi mid layer, which will then get
                 * SCSI_MLQUEUE_HOST_BUSY.
                 *
                 * hpsa_ciss_submit will have already freed c
                 * if it encountered a dma mapping failure.
                 */
                cmd->result = DID_IMM_RETRY << 16;
                scsi_done(cmd);
        }
}

/* Running in struct Scsi_Host->host_lock less mode */
static enum scsi_qc_status hpsa_scsi_queue_command(struct Scsi_Host *sh,
                                                   struct scsi_cmnd *cmd)
{
        struct ctlr_info *h;
        struct hpsa_scsi_dev_t *dev;
        struct CommandList *c;
        int rc = 0;

        /* Get the ptr to our adapter structure out of cmd->host. */
        h = sdev_to_hba(cmd->device);

        BUG_ON(scsi_cmd_to_rq(cmd)->tag < 0);

        dev = cmd->device->hostdata;
        if (!dev) {
                cmd->result = DID_NO_CONNECT << 16;
                scsi_done(cmd);
                return 0;
        }

        if (dev->removed) {
                cmd->result = DID_NO_CONNECT << 16;
                scsi_done(cmd);
                return 0;
        }

        if (unlikely(lockup_detected(h))) {
                cmd->result = DID_NO_CONNECT << 16;
                scsi_done(cmd);
                return 0;
        }

        if (dev->in_reset)
                return SCSI_MLQUEUE_DEVICE_BUSY;

        c = cmd_tagged_alloc(h, cmd);
        if (c == NULL)
                return SCSI_MLQUEUE_DEVICE_BUSY;

        /*
         * This is necessary because the SML doesn't zero out this field during
         * error recovery.
         */
        cmd->result = 0;

        /*
         * Call alternate submit routine for I/O accelerated commands.
         * Retries always go down the normal I/O path.
         * Note: If cmd->retries is non-zero, then this is a SML
         *       initiated retry and not a driver initiated retry.
         *       This command has been obtained from cmd_tagged_alloc
         *       and is therefore a brand-new command.
         */
        if (likely(cmd->retries == 0 &&
                        !blk_rq_is_passthrough(scsi_cmd_to_rq(cmd)) &&
                        h->acciopath_status)) {
                /* Submit with the retry_pending flag unset. */
                rc = hpsa_ioaccel_submit(h, c, cmd, false);
                if (rc == 0)
                        return 0;
                if (rc == SCSI_MLQUEUE_HOST_BUSY) {
                        hpsa_cmd_resolve_and_free(h, c);
                        return SCSI_MLQUEUE_HOST_BUSY;
                }
        }
        return hpsa_ciss_submit(h, c, cmd, dev);
}

static void hpsa_scan_complete(struct ctlr_info *h)
{
        unsigned long flags;

        spin_lock_irqsave(&h->scan_lock, flags);
        h->scan_finished = 1;
        wake_up(&h->scan_wait_queue);
        spin_unlock_irqrestore(&h->scan_lock, flags);
}

static void hpsa_scan_start(struct Scsi_Host *sh)
{
        struct ctlr_info *h = shost_to_hba(sh);
        unsigned long flags;

        /*
         * Don't let rescans be initiated on a controller known to be locked
         * up.  If the controller locks up *during* a rescan, that thread is
         * probably hosed, but at least we can prevent new rescan threads from
         * piling up on a locked up controller.
         */
        if (unlikely(lockup_detected(h)))
                return hpsa_scan_complete(h);

        /*
         * If a scan is already waiting to run, no need to add another
         */
        spin_lock_irqsave(&h->scan_lock, flags);
        if (h->scan_waiting) {
                spin_unlock_irqrestore(&h->scan_lock, flags);
                return;
        }

        spin_unlock_irqrestore(&h->scan_lock, flags);

        /* wait until any scan already in progress is finished. */
        while (1) {
                spin_lock_irqsave(&h->scan_lock, flags);
                if (h->scan_finished)
                        break;
                h->scan_waiting = 1;
                spin_unlock_irqrestore(&h->scan_lock, flags);
                wait_event(h->scan_wait_queue, h->scan_finished);
                /* Note: We don't need to worry about a race between this
                 * thread and driver unload because the midlayer will
                 * have incremented the reference count, so unload won't
                 * happen if we're in here.
                 */
        }
        h->scan_finished = 0; /* mark scan as in progress */
        h->scan_waiting = 0;
        spin_unlock_irqrestore(&h->scan_lock, flags);

        if (unlikely(lockup_detected(h)))
                return hpsa_scan_complete(h);

        /*
         * Do the scan after a reset completion
         */
        spin_lock_irqsave(&h->reset_lock, flags);
        if (h->reset_in_progress) {
                h->drv_req_rescan = 1;
                spin_unlock_irqrestore(&h->reset_lock, flags);
                hpsa_scan_complete(h);
                return;
        }
        spin_unlock_irqrestore(&h->reset_lock, flags);

        hpsa_update_scsi_devices(h);

        hpsa_scan_complete(h);
}

static int hpsa_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
        struct hpsa_scsi_dev_t *logical_drive = sdev->hostdata;

        if (!logical_drive)
                return -ENODEV;

        if (qdepth < 1)
                qdepth = 1;
        else if (qdepth > logical_drive->queue_depth)
                qdepth = logical_drive->queue_depth;

        return scsi_change_queue_depth(sdev, qdepth);
}

static int hpsa_scan_finished(struct Scsi_Host *sh,
        unsigned long elapsed_time)
{
        struct ctlr_info *h = shost_to_hba(sh);
        unsigned long flags;
        int finished;

        spin_lock_irqsave(&h->scan_lock, flags);
        finished = h->scan_finished;
        spin_unlock_irqrestore(&h->scan_lock, flags);
        return finished;
}

static int hpsa_scsi_host_alloc(struct ctlr_info *h)
{
        struct Scsi_Host *sh;

        sh = scsi_host_alloc(&hpsa_driver_template, sizeof(struct ctlr_info *));
        if (sh == NULL) {
                dev_err(&h->pdev->dev, "scsi_host_alloc failed\n");
                return -ENOMEM;
        }

        sh->io_port = 0;
        sh->n_io_port = 0;
        sh->this_id = -1;
        sh->max_channel = 3;
        sh->max_cmd_len = MAX_COMMAND_SIZE;
        sh->max_lun = HPSA_MAX_LUN;
        sh->max_id = HPSA_MAX_LUN;
        sh->can_queue = h->nr_cmds - HPSA_NRESERVED_CMDS;
        sh->cmd_per_lun = sh->can_queue;
        sh->sg_tablesize = h->maxsgentries;
        sh->transportt = hpsa_sas_transport_template;
        sh->hostdata[0] = (unsigned long) h;
        sh->irq = pci_irq_vector(h->pdev, 0);
        sh->unique_id = sh->irq;

        h->scsi_host = sh;
        return 0;
}

static int hpsa_scsi_add_host(struct ctlr_info *h)
{
        int rv;

        rv = scsi_add_host(h->scsi_host, &h->pdev->dev);
        if (rv) {
                dev_err(&h->pdev->dev, "scsi_add_host failed\n");
                return rv;
        }
        scsi_scan_host(h->scsi_host);
        return 0;
}

/*
 * The block layer has already gone to the trouble of picking out a unique,
 * small-integer tag for this request.  We use an offset from that value as
 * an index to select our command block.  (The offset allows us to reserve the
 * low-numbered entries for our own uses.)
 */
static int hpsa_get_cmd_index(struct scsi_cmnd *scmd)
{
        int idx = scsi_cmd_to_rq(scmd)->tag;

        if (idx < 0)
                return idx;

        /* Offset to leave space for internal cmds. */
        return idx += HPSA_NRESERVED_CMDS;
}

/*
 * Send a TEST_UNIT_READY command to the specified LUN using the specified
 * reply queue; returns zero if the unit is ready, and non-zero otherwise.
 */
static int hpsa_send_test_unit_ready(struct ctlr_info *h,
                                struct CommandList *c, unsigned char lunaddr[],
                                int reply_queue)
{
        int rc;

        /* Send the Test Unit Ready, fill_cmd can't fail, no mapping */
        (void) fill_cmd(c, TEST_UNIT_READY, h,
                        NULL, 0, 0, lunaddr, TYPE_CMD);
        rc = hpsa_scsi_do_simple_cmd(h, c, reply_queue, NO_TIMEOUT);
        if (rc)
                return rc;
        /* no unmap needed here because no data xfer. */

        /* Check if the unit is already ready. */
        if (c->err_info->CommandStatus == CMD_SUCCESS)
                return 0;

        /*
         * The first command sent after reset will receive "unit attention" to
         * indicate that the LUN has been reset...this is actually what we're
         * looking for (but, success is good too).
         */
        if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
                c->err_info->ScsiStatus == SAM_STAT_CHECK_CONDITION &&
                        (c->err_info->SenseInfo[2] == NO_SENSE ||
                         c->err_info->SenseInfo[2] == UNIT_ATTENTION))
                return 0;

        return 1;
}

/*
 * Wait for a TEST_UNIT_READY command to complete, retrying as necessary;
 * returns zero when the unit is ready, and non-zero when giving up.
 */
static int hpsa_wait_for_test_unit_ready(struct ctlr_info *h,
                                struct CommandList *c,
                                unsigned char lunaddr[], int reply_queue)
{
        int rc;
        int count = 0;
        int waittime = 1; /* seconds */

        /* Send test unit ready until device ready, or give up. */
        for (count = 0; count < HPSA_TUR_RETRY_LIMIT; count++) {

                /*
                 * Wait for a bit.  do this first, because if we send
                 * the TUR right away, the reset will just abort it.
                 */
                msleep(1000 * waittime);

                rc = hpsa_send_test_unit_ready(h, c, lunaddr, reply_queue);
                if (!rc)
                        break;

                /* Increase wait time with each try, up to a point. */
                if (waittime < HPSA_MAX_WAIT_INTERVAL_SECS)
                        waittime *= 2;

                dev_warn(&h->pdev->dev,
                         "waiting %d secs for device to become ready.\n",
                         waittime);
        }

        return rc;
}

static int wait_for_device_to_become_ready(struct ctlr_info *h,
                                           unsigned char lunaddr[],
                                           int reply_queue)
{
        int first_queue;
        int last_queue;
        int rq;
        int rc = 0;
        struct CommandList *c;

        c = cmd_alloc(h);

        /*
         * If no specific reply queue was requested, then send the TUR
         * repeatedly, requesting a reply on each reply queue; otherwise execute
         * the loop exactly once using only the specified queue.
         */
        if (reply_queue == DEFAULT_REPLY_QUEUE) {
                first_queue = 0;
                last_queue = h->nreply_queues - 1;
        } else {
                first_queue = reply_queue;
                last_queue = reply_queue;
        }

        for (rq = first_queue; rq <= last_queue; rq++) {
                rc = hpsa_wait_for_test_unit_ready(h, c, lunaddr, rq);
                if (rc)
                        break;
        }

        if (rc)
                dev_warn(&h->pdev->dev, "giving up on device.\n");
        else
                dev_warn(&h->pdev->dev, "device is ready.\n");

        cmd_free(h, c);
        return rc;
}

/* Need at least one of these error handlers to keep ../scsi/hosts.c from
 * complaining.  Doing a host- or bus-reset can't do anything good here.
 */
static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd)
{
        int rc = SUCCESS;
        int i;
        struct ctlr_info *h;
        struct hpsa_scsi_dev_t *dev = NULL;
        u8 reset_type;
        char msg[48];
        unsigned long flags;

        /* find the controller to which the command to be aborted was sent */
        h = sdev_to_hba(scsicmd->device);
        if (h == NULL) /* paranoia */
                return FAILED;

        spin_lock_irqsave(&h->reset_lock, flags);
        h->reset_in_progress = 1;
        spin_unlock_irqrestore(&h->reset_lock, flags);

        if (lockup_detected(h)) {
                rc = FAILED;
                goto return_reset_status;
        }

        dev = scsicmd->device->hostdata;
        if (!dev) {
                dev_err(&h->pdev->dev, "%s: device lookup failed\n", __func__);
                rc = FAILED;
                goto return_reset_status;
        }

        if (dev->devtype == TYPE_ENCLOSURE) {
                rc = SUCCESS;
                goto return_reset_status;
        }

        /* if controller locked up, we can guarantee command won't complete */
        if (lockup_detected(h)) {
                snprintf(msg, sizeof(msg),
                         "cmd %d RESET FAILED, lockup detected",
                         hpsa_get_cmd_index(scsicmd));
                hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
                rc = FAILED;
                goto return_reset_status;
        }

        /* this reset request might be the result of a lockup; check */
        if (detect_controller_lockup(h)) {
                snprintf(msg, sizeof(msg),
                         "cmd %d RESET FAILED, new lockup detected",
                         hpsa_get_cmd_index(scsicmd));
                hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);
                rc = FAILED;
                goto return_reset_status;
        }

        /* Do not attempt on controller */
        if (is_hba_lunid(dev->scsi3addr)) {
                rc = SUCCESS;
                goto return_reset_status;
        }

        if (is_logical_dev_addr_mode(dev->scsi3addr))
                reset_type = HPSA_DEVICE_RESET_MSG;
        else
                reset_type = HPSA_PHYS_TARGET_RESET;

        sprintf(msg, "resetting %s",
                reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ");
        hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);

        /*
         * wait to see if any commands will complete before sending reset
         */
        dev->in_reset = true; /* block any new cmds from OS for this device */
        for (i = 0; i < 10; i++) {
                if (atomic_read(&dev->commands_outstanding) > 0)
                        msleep(1000);
                else
                        break;
        }

        /* send a reset to the SCSI LUN which the command was sent to */
        rc = hpsa_do_reset(h, dev, reset_type, DEFAULT_REPLY_QUEUE);
        if (rc == 0)
                rc = SUCCESS;
        else
                rc = FAILED;

        sprintf(msg, "reset %s %s",
                reset_type == HPSA_DEVICE_RESET_MSG ? "logical " : "physical ",
                rc == SUCCESS ? "completed successfully" : "failed");
        hpsa_show_dev_msg(KERN_WARNING, h, dev, msg);

return_reset_status:
        spin_lock_irqsave(&h->reset_lock, flags);
        h->reset_in_progress = 0;
        if (dev)
                dev->in_reset = false;
        spin_unlock_irqrestore(&h->reset_lock, flags);
        return rc;
}

/*
 * For operations with an associated SCSI command, a command block is allocated
 * at init, and managed by cmd_tagged_alloc() and cmd_tagged_free() using the
 * block request tag as an index into a table of entries.  cmd_tagged_free() is
 * the complement, although cmd_free() may be called instead.
 * This function is only called for new requests from queue_command.
 */
static struct CommandList *cmd_tagged_alloc(struct ctlr_info *h,
                                            struct scsi_cmnd *scmd)
{
        int idx = hpsa_get_cmd_index(scmd);
        struct CommandList *c = h->cmd_pool + idx;

        if (idx < HPSA_NRESERVED_CMDS || idx >= h->nr_cmds) {
                dev_err(&h->pdev->dev, "Bad block tag: %d not in [%d..%d]\n",
                        idx, HPSA_NRESERVED_CMDS, h->nr_cmds - 1);
                /* The index value comes from the block layer, so if it's out of
                 * bounds, it's probably not our bug.
                 */
                BUG();
        }

        if (unlikely(!hpsa_is_cmd_idle(c))) {
                /*
                 * We expect that the SCSI layer will hand us a unique tag
                 * value.  Thus, there should never be a collision here between
                 * two requests...because if the selected command isn't idle
                 * then someone is going to be very disappointed.
                 */
                if (idx != h->last_collision_tag) { /* Print once per tag */
                        dev_warn(&h->pdev->dev,
                                "%s: tag collision (tag=%d)\n", __func__, idx);
                        if (scmd)
                                scsi_print_command(scmd);
                        h->last_collision_tag = idx;
                }
                return NULL;
        }

        atomic_inc(&c->refcount);
        hpsa_cmd_partial_init(h, idx, c);

        /*
         * This is a new command obtained from queue_command so
         * there have not been any driver initiated retry attempts.
         */
        c->retry_pending = false;

        return c;
}

static void cmd_tagged_free(struct ctlr_info *h, struct CommandList *c)
{
        /*
         * Release our reference to the block.  We don't need to do anything
         * else to free it, because it is accessed by index.
         */
        (void)atomic_dec(&c->refcount);
}

/*
 * For operations that cannot sleep, a command block is allocated at init,
 * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
 * which ones are free or in use.  Lock must be held when calling this.
 * cmd_free() is the complement.
 * This function never gives up and returns NULL.  If it hangs,
 * another thread must call cmd_free() to free some tags.
 */

static struct CommandList *cmd_alloc(struct ctlr_info *h)
{
        struct CommandList *c;
        int refcount, i;
        int offset = 0;

        /*
         * There is some *extremely* small but non-zero chance that that
         * multiple threads could get in here, and one thread could
         * be scanning through the list of bits looking for a free
         * one, but the free ones are always behind him, and other
         * threads sneak in behind him and eat them before he can
         * get to them, so that while there is always a free one, a
         * very unlucky thread might be starved anyway, never able to
         * beat the other threads.  In reality, this happens so
         * infrequently as to be indistinguishable from never.
         *
         * Note that we start allocating commands before the SCSI host structure
         * is initialized.  Since the search starts at bit zero, this
         * all works, since we have at least one command structure available;
         * however, it means that the structures with the low indexes have to be
         * reserved for driver-initiated requests, while requests from the block
         * layer will use the higher indexes.
         */

        for (;;) {
                i = find_next_zero_bit(h->cmd_pool_bits,
                                        HPSA_NRESERVED_CMDS,
                                        offset);
                if (unlikely(i >= HPSA_NRESERVED_CMDS)) {
                        offset = 0;
                        continue;
                }
                c = h->cmd_pool + i;
                refcount = atomic_inc_return(&c->refcount);
                if (unlikely(refcount > 1)) {
                        cmd_free(h, c); /* already in use */
                        offset = (i + 1) % HPSA_NRESERVED_CMDS;
                        continue;
                }
                set_bit(i, h->cmd_pool_bits);
                break; /* it's ours now. */
        }
        hpsa_cmd_partial_init(h, i, c);
        c->device = NULL;

        /*
         * cmd_alloc is for "internal" commands and they are never
         * retried.
         */
        c->retry_pending = false;

        return c;
}

/*
 * This is the complementary operation to cmd_alloc().  Note, however, in some
 * corner cases it may also be used to free blocks allocated by
 * cmd_tagged_alloc() in which case the ref-count decrement does the trick and
 * the clear-bit is harmless.
 */
static void cmd_free(struct ctlr_info *h, struct CommandList *c)
{
        if (atomic_dec_and_test(&c->refcount)) {
                int i;

                i = c - h->cmd_pool;
                clear_bit(i, h->cmd_pool_bits);
        }
}

#ifdef CONFIG_COMPAT

static int hpsa_ioctl32_passthru(struct scsi_device *dev, unsigned int cmd,
        void __user *arg)
{
        struct ctlr_info *h = sdev_to_hba(dev);
        IOCTL32_Command_struct __user *arg32 = arg;
        IOCTL_Command_struct arg64;
        int err;
        u32 cp;

        if (!arg)
                return -EINVAL;

        memset(&arg64, 0, sizeof(arg64));
        if (copy_from_user(&arg64, arg32, offsetof(IOCTL_Command_struct, buf)))
                return -EFAULT;
        if (get_user(cp, &arg32->buf))
                return -EFAULT;
        arg64.buf = compat_ptr(cp);

        if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0)
                return -EAGAIN;
        err = hpsa_passthru_ioctl(h, &arg64);
        atomic_inc(&h->passthru_cmds_avail);
        if (err)
                return err;
        if (copy_to_user(&arg32->error_info, &arg64.error_info,
                         sizeof(arg32->error_info)))
                return -EFAULT;
        return 0;
}

static int hpsa_ioctl32_big_passthru(struct scsi_device *dev,
        unsigned int cmd, void __user *arg)
{
        struct ctlr_info *h = sdev_to_hba(dev);
        BIG_IOCTL32_Command_struct __user *arg32 = arg;
        BIG_IOCTL_Command_struct arg64;
        int err;
        u32 cp;

        if (!arg)
                return -EINVAL;
        memset(&arg64, 0, sizeof(arg64));
        if (copy_from_user(&arg64, arg32,
                           offsetof(BIG_IOCTL32_Command_struct, buf)))
                return -EFAULT;
        if (get_user(cp, &arg32->buf))
                return -EFAULT;
        arg64.buf = compat_ptr(cp);

        if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0)
                return -EAGAIN;
        err = hpsa_big_passthru_ioctl(h, &arg64);
        atomic_inc(&h->passthru_cmds_avail);
        if (err)
                return err;
        if (copy_to_user(&arg32->error_info, &arg64.error_info,
                         sizeof(arg32->error_info)))
                return -EFAULT;
        return 0;
}

static int hpsa_compat_ioctl(struct scsi_device *dev, unsigned int cmd,
                             void __user *arg)
{
        switch (cmd) {
        case CCISS_GETPCIINFO:
        case CCISS_GETINTINFO:
        case CCISS_SETINTINFO:
        case CCISS_GETNODENAME:
        case CCISS_SETNODENAME:
        case CCISS_GETHEARTBEAT:
        case CCISS_GETBUSTYPES:
        case CCISS_GETFIRMVER:
        case CCISS_GETDRIVVER:
        case CCISS_REVALIDVOLS:
        case CCISS_DEREGDISK:
        case CCISS_REGNEWDISK:
        case CCISS_REGNEWD:
        case CCISS_RESCANDISK:
        case CCISS_GETLUNINFO:
                return hpsa_ioctl(dev, cmd, arg);

        case CCISS_PASSTHRU32:
                return hpsa_ioctl32_passthru(dev, cmd, arg);
        case CCISS_BIG_PASSTHRU32:
                return hpsa_ioctl32_big_passthru(dev, cmd, arg);

        default:
                return -ENOIOCTLCMD;
        }
}
#endif

static int hpsa_getpciinfo_ioctl(struct ctlr_info *h, void __user *argp)
{
        struct hpsa_pci_info pciinfo;

        if (!argp)
                return -EINVAL;
        pciinfo.domain = pci_domain_nr(h->pdev->bus);
        pciinfo.bus = h->pdev->bus->number;
        pciinfo.dev_fn = h->pdev->devfn;
        pciinfo.board_id = h->board_id;
        if (copy_to_user(argp, &pciinfo, sizeof(pciinfo)))
                return -EFAULT;
        return 0;
}

static int hpsa_getdrivver_ioctl(struct ctlr_info *h, void __user *argp)
{
        DriverVer_type DriverVer;
        unsigned char vmaj, vmin, vsubmin;
        int rc;

        rc = sscanf(HPSA_DRIVER_VERSION, "%hhu.%hhu.%hhu",
                &vmaj, &vmin, &vsubmin);
        if (rc != 3) {
                dev_info(&h->pdev->dev, "driver version string '%s' "
                        "unrecognized.", HPSA_DRIVER_VERSION);
                vmaj = 0;
                vmin = 0;
                vsubmin = 0;
        }
        DriverVer = (vmaj << 16) | (vmin << 8) | vsubmin;
        if (!argp)
                return -EINVAL;
        if (copy_to_user(argp, &DriverVer, sizeof(DriverVer_type)))
                return -EFAULT;
        return 0;
}

static int hpsa_passthru_ioctl(struct ctlr_info *h,
                               IOCTL_Command_struct *iocommand)
{
        struct CommandList *c;
        char *buff = NULL;
        u64 temp64;
        int rc = 0;

        if (!capable(CAP_SYS_RAWIO))
                return -EPERM;
        if ((iocommand->buf_size < 1) &&
            (iocommand->Request.Type.Direction != XFER_NONE)) {
                return -EINVAL;
        }
        if (iocommand->buf_size > 0) {
                if (iocommand->Request.Type.Direction & XFER_WRITE) {
                        buff = memdup_user(iocommand->buf, iocommand->buf_size);
                        if (IS_ERR(buff))
                                return PTR_ERR(buff);
                } else {
                        buff = kzalloc(iocommand->buf_size, GFP_KERNEL);
                        if (!buff)
                                return -ENOMEM;
                }
        }
        c = cmd_alloc(h);

        /* Fill in the command type */
        c->cmd_type = CMD_IOCTL_PEND;
        c->scsi_cmd = SCSI_CMD_BUSY;
        /* Fill in Command Header */
        c->Header.ReplyQueue = 0; /* unused in simple mode */
        if (iocommand->buf_size > 0) {  /* buffer to fill */
                c->Header.SGList = 1;
                c->Header.SGTotal = cpu_to_le16(1);
        } else  { /* no buffers to fill */
                c->Header.SGList = 0;
                c->Header.SGTotal = cpu_to_le16(0);
        }
        memcpy(&c->Header.LUN, &iocommand->LUN_info, sizeof(c->Header.LUN));

        /* Fill in Request block */
        memcpy(&c->Request, &iocommand->Request,
                sizeof(c->Request));

        /* Fill in the scatter gather information */
        if (iocommand->buf_size > 0) {
                temp64 = dma_map_single(&h->pdev->dev, buff,
                        iocommand->buf_size, DMA_BIDIRECTIONAL);
                if (dma_mapping_error(&h->pdev->dev, (dma_addr_t) temp64)) {
                        c->SG[0].Addr = cpu_to_le64(0);
                        c->SG[0].Len = cpu_to_le32(0);
                        rc = -ENOMEM;
                        goto out;
                }
                c->SG[0].Addr = cpu_to_le64(temp64);
                c->SG[0].Len = cpu_to_le32(iocommand->buf_size);
                c->SG[0].Ext = cpu_to_le32(HPSA_SG_LAST); /* not chaining */
        }
        rc = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
                                        NO_TIMEOUT);
        if (iocommand->buf_size > 0)
                hpsa_pci_unmap(h->pdev, c, 1, DMA_BIDIRECTIONAL);
        check_ioctl_unit_attention(h, c);
        if (rc) {
                rc = -EIO;
                goto out;
        }

        /* Copy the error information out */
        memcpy(&iocommand->error_info, c->err_info,
                sizeof(iocommand->error_info));
        if ((iocommand->Request.Type.Direction & XFER_READ) &&
                iocommand->buf_size > 0) {
                /* Copy the data out of the buffer we created */
                if (copy_to_user(iocommand->buf, buff, iocommand->buf_size)) {
                        rc = -EFAULT;
                        goto out;
                }
        }
out:
        cmd_free(h, c);
        kfree(buff);
        return rc;
}

static int hpsa_big_passthru_ioctl(struct ctlr_info *h,
                                   BIG_IOCTL_Command_struct *ioc)
{
        struct CommandList *c;
        unsigned char **buff = NULL;
        int *buff_size = NULL;
        u64 temp64;
        BYTE sg_used = 0;
        int status = 0;
        u32 left;
        u32 sz;
        BYTE __user *data_ptr;

        if (!capable(CAP_SYS_RAWIO))
                return -EPERM;

        if ((ioc->buf_size < 1) &&
            (ioc->Request.Type.Direction != XFER_NONE))
                return -EINVAL;
        /* Check kmalloc limits  using all SGs */
        if (ioc->malloc_size > MAX_KMALLOC_SIZE)
                return -EINVAL;
        if (ioc->buf_size > ioc->malloc_size * SG_ENTRIES_IN_CMD)
                return -EINVAL;
        buff = kcalloc(SG_ENTRIES_IN_CMD, sizeof(char *), GFP_KERNEL);
        if (!buff) {
                status = -ENOMEM;
                goto cleanup1;
        }
        buff_size = kmalloc_objs(int, SG_ENTRIES_IN_CMD);
        if (!buff_size) {
                status = -ENOMEM;
                goto cleanup1;
        }
        left = ioc->buf_size;
        data_ptr = ioc->buf;
        while (left) {
                sz = (left > ioc->malloc_size) ? ioc->malloc_size : left;
                buff_size[sg_used] = sz;

                if (ioc->Request.Type.Direction & XFER_WRITE) {
                        buff[sg_used] = memdup_user(data_ptr, sz);
                        if (IS_ERR(buff[sg_used])) {
                                status = PTR_ERR(buff[sg_used]);
                                goto cleanup1;
                        }
                } else {
                        buff[sg_used] = kzalloc(sz, GFP_KERNEL);
                        if (!buff[sg_used]) {
                                status = -ENOMEM;
                                goto cleanup1;
                        }
                }

                left -= sz;
                data_ptr += sz;
                sg_used++;
        }
        c = cmd_alloc(h);

        c->cmd_type = CMD_IOCTL_PEND;
        c->scsi_cmd = SCSI_CMD_BUSY;
        c->Header.ReplyQueue = 0;
        c->Header.SGList = (u8) sg_used;
        c->Header.SGTotal = cpu_to_le16(sg_used);
        memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN));
        memcpy(&c->Request, &ioc->Request, sizeof(c->Request));
        if (ioc->buf_size > 0) {
                int i;
                for (i = 0; i < sg_used; i++) {
                        temp64 = dma_map_single(&h->pdev->dev, buff[i],
                                    buff_size[i], DMA_BIDIRECTIONAL);
                        if (dma_mapping_error(&h->pdev->dev,
                                                        (dma_addr_t) temp64)) {
                                c->SG[i].Addr = cpu_to_le64(0);
                                c->SG[i].Len = cpu_to_le32(0);
                                hpsa_pci_unmap(h->pdev, c, i,
                                        DMA_BIDIRECTIONAL);
                                status = -ENOMEM;
                                goto cleanup0;
                        }
                        c->SG[i].Addr = cpu_to_le64(temp64);
                        c->SG[i].Len = cpu_to_le32(buff_size[i]);
                        c->SG[i].Ext = cpu_to_le32(0);
                }
                c->SG[--i].Ext = cpu_to_le32(HPSA_SG_LAST);
        }
        status = hpsa_scsi_do_simple_cmd(h, c, DEFAULT_REPLY_QUEUE,
                                                NO_TIMEOUT);
        if (sg_used)
                hpsa_pci_unmap(h->pdev, c, sg_used, DMA_BIDIRECTIONAL);
        check_ioctl_unit_attention(h, c);
        if (status) {
                status = -EIO;
                goto cleanup0;
        }

        /* Copy the error information out */
        memcpy(&ioc->error_info, c->err_info, sizeof(ioc->error_info));
        if ((ioc->Request.Type.Direction & XFER_READ) && ioc->buf_size > 0) {
                int i;

                /* Copy the data out of the buffer we created */
                BYTE __user *ptr = ioc->buf;
                for (i = 0; i < sg_used; i++) {
                        if (copy_to_user(ptr, buff[i], buff_size[i])) {
                                status = -EFAULT;
                                goto cleanup0;
                        }
                        ptr += buff_size[i];
                }
        }
        status = 0;
cleanup0:
        cmd_free(h, c);
cleanup1:
        if (buff) {
                int i;

                for (i = 0; i < sg_used; i++)
                        kfree(buff[i]);
                kfree(buff);
        }
        kfree(buff_size);
        return status;
}

static void check_ioctl_unit_attention(struct ctlr_info *h,
        struct CommandList *c)
{
        if (c->err_info->CommandStatus == CMD_TARGET_STATUS &&
                        c->err_info->ScsiStatus != SAM_STAT_CHECK_CONDITION)
                (void) check_for_unit_attention(h, c);
}

/*
 * ioctl
 */
static int hpsa_ioctl(struct scsi_device *dev, unsigned int cmd,
                      void __user *argp)
{
        struct ctlr_info *h = sdev_to_hba(dev);
        int rc;

        switch (cmd) {
        case CCISS_DEREGDISK:
        case CCISS_REGNEWDISK:
        case CCISS_REGNEWD:
                hpsa_scan_start(h->scsi_host);
                return 0;
        case CCISS_GETPCIINFO:
                return hpsa_getpciinfo_ioctl(h, argp);
        case CCISS_GETDRIVVER:
                return hpsa_getdrivver_ioctl(h, argp);
        case CCISS_PASSTHRU: {
                IOCTL_Command_struct iocommand;

                if (!argp)
                        return -EINVAL;
                if (copy_from_user(&iocommand, argp, sizeof(iocommand)))
                        return -EFAULT;
                if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0)
                        return -EAGAIN;
                rc = hpsa_passthru_ioctl(h, &iocommand);
                atomic_inc(&h->passthru_cmds_avail);
                if (!rc && copy_to_user(argp, &iocommand, sizeof(iocommand)))
                        rc = -EFAULT;
                return rc;
        }
        case CCISS_BIG_PASSTHRU: {
                BIG_IOCTL_Command_struct ioc;
                if (!argp)
                        return -EINVAL;
                if (copy_from_user(&ioc, argp, sizeof(ioc)))
                        return -EFAULT;
                if (atomic_dec_if_positive(&h->passthru_cmds_avail) < 0)
                        return -EAGAIN;
                rc = hpsa_big_passthru_ioctl(h, &ioc);
                atomic_inc(&h->passthru_cmds_avail);
                if (!rc && copy_to_user(argp, &ioc, sizeof(ioc)))
                        rc = -EFAULT;
                return rc;
        }
        default:
                return -ENOTTY;
        }
}

static void hpsa_send_host_reset(struct ctlr_info *h, u8 reset_type)
{
        struct CommandList *c;

        c = cmd_alloc(h);

        /* fill_cmd can't fail here, no data buffer to map */
        (void) fill_cmd(c, HPSA_DEVICE_RESET_MSG, h, NULL, 0, 0,
                RAID_CTLR_LUNID, TYPE_MSG);
        c->Request.CDB[1] = reset_type; /* fill_cmd defaults to target reset */
        c->waiting = NULL;
        enqueue_cmd_and_start_io(h, c);
        /* Don't wait for completion, the reset won't complete.  Don't free
         * the command either.  This is the last command we will send before
         * re-initializing everything, so it doesn't matter and won't leak.
         */
        return;
}

static int fill_cmd(struct CommandList *c, u8 cmd, struct ctlr_info *h,
        void *buff, size_t size, u16 page_code, unsigned char *scsi3addr,
        int cmd_type)
{
        enum dma_data_direction dir = DMA_NONE;

        c->cmd_type = CMD_IOCTL_PEND;
        c->scsi_cmd = SCSI_CMD_BUSY;
        c->Header.ReplyQueue = 0;
        if (buff != NULL && size > 0) {
                c->Header.SGList = 1;
                c->Header.SGTotal = cpu_to_le16(1);
        } else {
                c->Header.SGList = 0;
                c->Header.SGTotal = cpu_to_le16(0);
        }
        memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8);

        if (cmd_type == TYPE_CMD) {
                switch (cmd) {
                case HPSA_INQUIRY:
                        /* are we trying to read a vital product page */
                        if (page_code & VPD_PAGE) {
                                c->Request.CDB[1] = 0x01;
                                c->Request.CDB[2] = (page_code & 0xff);
                        }
                        c->Request.CDBLen = 6;
                        c->Request.type_attr_dir =
                                TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
                        c->Request.Timeout = 0;
                        c->Request.CDB[0] = HPSA_INQUIRY;
                        c->Request.CDB[4] = size & 0xFF;
                        break;
                case RECEIVE_DIAGNOSTIC:
                        c->Request.CDBLen = 6;
                        c->Request.type_attr_dir =
                                TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
                        c->Request.Timeout = 0;
                        c->Request.CDB[0] = cmd;
                        c->Request.CDB[1] = 1;
                        c->Request.CDB[2] = 1;
                        c->Request.CDB[3] = (size >> 8) & 0xFF;
                        c->Request.CDB[4] = size & 0xFF;
                        break;
                case HPSA_REPORT_LOG:
                case HPSA_REPORT_PHYS:
                        /* Talking to controller so It's a physical command
                           mode = 00 target = 0.  Nothing to write.
                         */
                        c->Request.CDBLen = 12;
                        c->Request.type_attr_dir =
                                TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
                        c->Request.Timeout = 0;
                        c->Request.CDB[0] = cmd;
                        c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */
                        c->Request.CDB[7] = (size >> 16) & 0xFF;
                        c->Request.CDB[8] = (size >> 8) & 0xFF;
                        c->Request.CDB[9] = size & 0xFF;
                        break;
                case BMIC_SENSE_DIAG_OPTIONS:
                        c->Request.CDBLen = 16;
                        c->Request.type_attr_dir =
                                TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
                        c->Request.Timeout = 0;
                        /* Spec says this should be BMIC_WRITE */
                        c->Request.CDB[0] = BMIC_READ;
                        c->Request.CDB[6] = BMIC_SENSE_DIAG_OPTIONS;
                        break;
                case BMIC_SET_DIAG_OPTIONS:
                        c->Request.CDBLen = 16;
                        c->Request.type_attr_dir =
                                        TYPE_ATTR_DIR(cmd_type,
                                                ATTR_SIMPLE, XFER_WRITE);
                        c->Request.Timeout = 0;
                        c->Request.CDB[0] = BMIC_WRITE;
                        c->Request.CDB[6] = BMIC_SET_DIAG_OPTIONS;
                        break;
                case HPSA_CACHE_FLUSH:
                        c->Request.CDBLen = 12;
                        c->Request.type_attr_dir =
                                        TYPE_ATTR_DIR(cmd_type,
                                                ATTR_SIMPLE, XFER_WRITE);
                        c->Request.Timeout = 0;
                        c->Request.CDB[0] = BMIC_WRITE;
                        c->Request.CDB[6] = BMIC_CACHE_FLUSH;
                        c->Request.CDB[7] = (size >> 8) & 0xFF;
                        c->Request.CDB[8] = size & 0xFF;
                        break;
                case TEST_UNIT_READY:
                        c->Request.CDBLen = 6;
                        c->Request.type_attr_dir =
                                TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE);
                        c->Request.Timeout = 0;
                        break;
                case HPSA_GET_RAID_MAP:
                        c->Request.CDBLen = 12;
                        c->Request.type_attr_dir =
                                TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
                        c->Request.Timeout = 0;
                        c->Request.CDB[0] = HPSA_CISS_READ;
                        c->Request.CDB[1] = cmd;
                        c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */
                        c->Request.CDB[7] = (size >> 16) & 0xFF;
                        c->Request.CDB[8] = (size >> 8) & 0xFF;
                        c->Request.CDB[9] = size & 0xFF;
                        break;
                case BMIC_SENSE_CONTROLLER_PARAMETERS:
                        c->Request.CDBLen = 10;
                        c->Request.type_attr_dir =
                                TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
                        c->Request.Timeout = 0;
                        c->Request.CDB[0] = BMIC_READ;
                        c->Request.CDB[6] = BMIC_SENSE_CONTROLLER_PARAMETERS;
                        c->Request.CDB[7] = (size >> 16) & 0xFF;
                        c->Request.CDB[8] = (size >> 8) & 0xFF;
                        break;
                case BMIC_IDENTIFY_PHYSICAL_DEVICE:
                        c->Request.CDBLen = 10;
                        c->Request.type_attr_dir =
                                TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
                        c->Request.Timeout = 0;
                        c->Request.CDB[0] = BMIC_READ;
                        c->Request.CDB[6] = BMIC_IDENTIFY_PHYSICAL_DEVICE;
                        c->Request.CDB[7] = (size >> 16) & 0xFF;
                        c->Request.CDB[8] = (size >> 8) & 0XFF;
                        break;
                case BMIC_SENSE_SUBSYSTEM_INFORMATION:
                        c->Request.CDBLen = 10;
                        c->Request.type_attr_dir =
                                TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
                        c->Request.Timeout = 0;
                        c->Request.CDB[0] = BMIC_READ;
                        c->Request.CDB[6] = BMIC_SENSE_SUBSYSTEM_INFORMATION;
                        c->Request.CDB[7] = (size >> 16) & 0xFF;
                        c->Request.CDB[8] = (size >> 8) & 0XFF;
                        break;
                case BMIC_SENSE_STORAGE_BOX_PARAMS:
                        c->Request.CDBLen = 10;
                        c->Request.type_attr_dir =
                                TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
                        c->Request.Timeout = 0;
                        c->Request.CDB[0] = BMIC_READ;
                        c->Request.CDB[6] = BMIC_SENSE_STORAGE_BOX_PARAMS;
                        c->Request.CDB[7] = (size >> 16) & 0xFF;
                        c->Request.CDB[8] = (size >> 8) & 0XFF;
                        break;
                case BMIC_IDENTIFY_CONTROLLER:
                        c->Request.CDBLen = 10;
                        c->Request.type_attr_dir =
                                TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
                        c->Request.Timeout = 0;
                        c->Request.CDB[0] = BMIC_READ;
                        c->Request.CDB[1] = 0;
                        c->Request.CDB[2] = 0;
                        c->Request.CDB[3] = 0;
                        c->Request.CDB[4] = 0;
                        c->Request.CDB[5] = 0;
                        c->Request.CDB[6] = BMIC_IDENTIFY_CONTROLLER;
                        c->Request.CDB[7] = (size >> 16) & 0xFF;
                        c->Request.CDB[8] = (size >> 8) & 0XFF;
                        c->Request.CDB[9] = 0;
                        break;
                default:
                        dev_warn(&h->pdev->dev, "unknown command 0x%c\n", cmd);
                        BUG();
                }
        } else if (cmd_type == TYPE_MSG) {
                switch (cmd) {

                case  HPSA_PHYS_TARGET_RESET:
                        c->Request.CDBLen = 16;
                        c->Request.type_attr_dir =
                                TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE);
                        c->Request.Timeout = 0; /* Don't time out */
                        memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
                        c->Request.CDB[0] = HPSA_RESET;
                        c->Request.CDB[1] = HPSA_TARGET_RESET_TYPE;
                        /* Physical target reset needs no control bytes 4-7*/
                        c->Request.CDB[4] = 0x00;
                        c->Request.CDB[5] = 0x00;
                        c->Request.CDB[6] = 0x00;
                        c->Request.CDB[7] = 0x00;
                        break;
                case  HPSA_DEVICE_RESET_MSG:
                        c->Request.CDBLen = 16;
                        c->Request.type_attr_dir =
                                TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE);
                        c->Request.Timeout = 0; /* Don't time out */
                        memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
                        c->Request.CDB[0] =  cmd;
                        c->Request.CDB[1] = HPSA_RESET_TYPE_LUN;
                        /* If bytes 4-7 are zero, it means reset the */
                        /* LunID device */
                        c->Request.CDB[4] = 0x00;
                        c->Request.CDB[5] = 0x00;
                        c->Request.CDB[6] = 0x00;
                        c->Request.CDB[7] = 0x00;
                        break;
                default:
                        dev_warn(&h->pdev->dev, "unknown message type %d\n",
                                cmd);
                        BUG();
                }
        } else {
                dev_warn(&h->pdev->dev, "unknown command type %d\n", cmd_type);
                BUG();
        }

        switch (GET_DIR(c->Request.type_attr_dir)) {
        case XFER_READ:
                dir = DMA_FROM_DEVICE;
                break;
        case XFER_WRITE:
                dir = DMA_TO_DEVICE;
                break;
        case XFER_NONE:
                dir = DMA_NONE;
                break;
        default:
                dir = DMA_BIDIRECTIONAL;
        }
        if (hpsa_map_one(h->pdev, c, buff, size, dir))
                return -1;
        return 0;
}

/*
 * Map (physical) PCI mem into (virtual) kernel space
 */
static void __iomem *remap_pci_mem(ulong base, ulong size)
{
        ulong page_base = ((ulong) base) & PAGE_MASK;
        ulong page_offs = ((ulong) base) - page_base;
        void __iomem *page_remapped = ioremap(page_base,
                page_offs + size);

        return page_remapped ? (page_remapped + page_offs) : NULL;
}

static inline unsigned long get_next_completion(struct ctlr_info *h, u8 q)
{
        return h->access.command_completed(h, q);
}

static inline bool interrupt_pending(struct ctlr_info *h)
{
        return h->access.intr_pending(h);
}

static inline long interrupt_not_for_us(struct ctlr_info *h)
{
        return (h->access.intr_pending(h) == 0) ||
                (h->interrupts_enabled == 0);
}

static inline int bad_tag(struct ctlr_info *h, u32 tag_index,
        u32 raw_tag)
{
        if (unlikely(tag_index >= h->nr_cmds)) {
                dev_warn(&h->pdev->dev, "bad tag 0x%08x ignored.\n", raw_tag);
                return 1;
        }
        return 0;
}

static inline void finish_cmd(struct CommandList *c)
{
        dial_up_lockup_detection_on_fw_flash_complete(c->h, c);
        if (likely(c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_SCSI
                        || c->cmd_type == CMD_IOACCEL2))
                complete_scsi_command(c);
        else if (c->cmd_type == CMD_IOCTL_PEND || c->cmd_type == IOACCEL2_TMF)
                complete(c->waiting);
}

/* process completion of an indexed ("direct lookup") command */
static inline void process_indexed_cmd(struct ctlr_info *h,
        u32 raw_tag)
{
        u32 tag_index;
        struct CommandList *c;

        tag_index = raw_tag >> DIRECT_LOOKUP_SHIFT;
        if (!bad_tag(h, tag_index, raw_tag)) {
                c = h->cmd_pool + tag_index;
                finish_cmd(c);
        }
}

/* Some controllers, like p400, will give us one interrupt
 * after a soft reset, even if we turned interrupts off.
 * Only need to check for this in the hpsa_xxx_discard_completions
 * functions.
 */
static int ignore_bogus_interrupt(struct ctlr_info *h)
{
        if (likely(!reset_devices))
                return 0;

        if (likely(h->interrupts_enabled))
                return 0;

        dev_info(&h->pdev->dev, "Received interrupt while interrupts disabled "
                "(known firmware bug.)  Ignoring.\n");

        return 1;
}

/*
 * Convert &h->q[x] (passed to interrupt handlers) back to h.
 * Relies on (h-q[x] == x) being true for x such that
 * 0 <= x < MAX_REPLY_QUEUES.
 */
static struct ctlr_info *queue_to_hba(u8 *queue)
{
        return container_of((queue - *queue), struct ctlr_info, q[0]);
}

static irqreturn_t hpsa_intx_discard_completions(int irq, void *queue)
{
        struct ctlr_info *h = queue_to_hba(queue);
        u8 q = *(u8 *) queue;
        u32 raw_tag;

        if (ignore_bogus_interrupt(h))
                return IRQ_NONE;

        if (interrupt_not_for_us(h))
                return IRQ_NONE;
        h->last_intr_timestamp = get_jiffies_64();
        while (interrupt_pending(h)) {
                raw_tag = get_next_completion(h, q);
                while (raw_tag != FIFO_EMPTY)
                        raw_tag = next_command(h, q);
        }
        return IRQ_HANDLED;
}

static irqreturn_t hpsa_msix_discard_completions(int irq, void *queue)
{
        struct ctlr_info *h = queue_to_hba(queue);
        u32 raw_tag;
        u8 q = *(u8 *) queue;

        if (ignore_bogus_interrupt(h))
                return IRQ_NONE;

        h->last_intr_timestamp = get_jiffies_64();
        raw_tag = get_next_completion(h, q);
        while (raw_tag != FIFO_EMPTY)
                raw_tag = next_command(h, q);
        return IRQ_HANDLED;
}

static irqreturn_t do_hpsa_intr_intx(int irq, void *queue)
{
        struct ctlr_info *h = queue_to_hba((u8 *) queue);
        u32 raw_tag;
        u8 q = *(u8 *) queue;

        if (interrupt_not_for_us(h))
                return IRQ_NONE;
        h->last_intr_timestamp = get_jiffies_64();
        while (interrupt_pending(h)) {
                raw_tag = get_next_completion(h, q);
                while (raw_tag != FIFO_EMPTY) {
                        process_indexed_cmd(h, raw_tag);
                        raw_tag = next_command(h, q);
                }
        }
        return IRQ_HANDLED;
}

static irqreturn_t do_hpsa_intr_msi(int irq, void *queue)
{
        struct ctlr_info *h = queue_to_hba(queue);
        u32 raw_tag;
        u8 q = *(u8 *) queue;

        h->last_intr_timestamp = get_jiffies_64();
        raw_tag = get_next_completion(h, q);
        while (raw_tag != FIFO_EMPTY) {
                process_indexed_cmd(h, raw_tag);
                raw_tag = next_command(h, q);
        }
        return IRQ_HANDLED;
}

/* Send a message CDB to the firmware. Careful, this only works
 * in simple mode, not performant mode due to the tag lookup.
 * We only ever use this immediately after a controller reset.
 */
static int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
                        unsigned char type)
{
        struct Command {
                struct CommandListHeader CommandHeader;
                struct RequestBlock Request;
                struct ErrDescriptor ErrorDescriptor;
        };
        struct Command *cmd;
        static const size_t cmd_sz = sizeof(*cmd) +
                                        sizeof(cmd->ErrorDescriptor);
        dma_addr_t paddr64;
        __le32 paddr32;
        u32 tag;
        void __iomem *vaddr;
        int i, err;

        vaddr = pci_ioremap_bar(pdev, 0);
        if (vaddr == NULL)
                return -ENOMEM;

        /* The Inbound Post Queue only accepts 32-bit physical addresses for the
         * CCISS commands, so they must be allocated from the lower 4GiB of
         * memory.
         */
        err = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32));
        if (err) {
                iounmap(vaddr);
                return err;
        }

        cmd = dma_alloc_coherent(&pdev->dev, cmd_sz, &paddr64, GFP_KERNEL);
        if (cmd == NULL) {
                iounmap(vaddr);
                return -ENOMEM;
        }

        /* This must fit, because of the 32-bit consistent DMA mask.  Also,
         * although there's no guarantee, we assume that the address is at
         * least 4-byte aligned (most likely, it's page-aligned).
         */
        paddr32 = cpu_to_le32(paddr64);

        cmd->CommandHeader.ReplyQueue = 0;
        cmd->CommandHeader.SGList = 0;
        cmd->CommandHeader.SGTotal = cpu_to_le16(0);
        cmd->CommandHeader.tag = cpu_to_le64(paddr64);
        memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);

        cmd->Request.CDBLen = 16;
        cmd->Request.type_attr_dir =
                        TYPE_ATTR_DIR(TYPE_MSG, ATTR_HEADOFQUEUE, XFER_NONE);
        cmd->Request.Timeout = 0; /* Don't time out */
        cmd->Request.CDB[0] = opcode;
        cmd->Request.CDB[1] = type;
        memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */
        cmd->ErrorDescriptor.Addr =
                        cpu_to_le64((le32_to_cpu(paddr32) + sizeof(*cmd)));
        cmd->ErrorDescriptor.Len = cpu_to_le32(sizeof(struct ErrorInfo));

        writel(le32_to_cpu(paddr32), vaddr + SA5_REQUEST_PORT_OFFSET);

        for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) {
                tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
                if ((tag & ~HPSA_SIMPLE_ERROR_BITS) == paddr64)
                        break;
                msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS);
        }

        iounmap(vaddr);

        /* we leak the DMA buffer here ... no choice since the controller could
         *  still complete the command.
         */
        if (i == HPSA_MSG_SEND_RETRY_LIMIT) {
                dev_err(&pdev->dev, "controller message %02x:%02x timed out\n",
                        opcode, type);
                return -ETIMEDOUT;
        }

        dma_free_coherent(&pdev->dev, cmd_sz, cmd, paddr64);

        if (tag & HPSA_ERROR_BIT) {
                dev_err(&pdev->dev, "controller message %02x:%02x failed\n",
                        opcode, type);
                return -EIO;
        }

        dev_info(&pdev->dev, "controller message %02x:%02x succeeded\n",
                opcode, type);
        return 0;
}

#define hpsa_noop(p) hpsa_message(p, 3, 0)

static int hpsa_controller_hard_reset(struct pci_dev *pdev,
        void __iomem *vaddr, u32 use_doorbell)
{

        if (use_doorbell) {
                /* For everything after the P600, the PCI power state method
                 * of resetting the controller doesn't work, so we have this
                 * other way using the doorbell register.
                 */
                dev_info(&pdev->dev, "using doorbell to reset controller\n");
                writel(use_doorbell, vaddr + SA5_DOORBELL);

                /* PMC hardware guys tell us we need a 10 second delay after
                 * doorbell reset and before any attempt to talk to the board
                 * at all to ensure that this actually works and doesn't fall
                 * over in some weird corner cases.
                 */
                msleep(10000);
        } else { /* Try to do it the PCI power state way */

                /* Quoting from the Open CISS Specification: "The Power
                 * Management Control/Status Register (CSR) controls the power
                 * state of the device.  The normal operating state is D0,
                 * CSR=00h.  The software off state is D3, CSR=03h.  To reset
                 * the controller, place the interface device in D3 then to D0,
                 * this causes a secondary PCI reset which will reset the
                 * controller." */

                int rc = 0;

                dev_info(&pdev->dev, "using PCI PM to reset controller\n");

                /* enter the D3hot power management state */
                rc = pci_set_power_state(pdev, PCI_D3hot);
                if (rc)
                        return rc;

                msleep(500);

                /* enter the D0 power management state */
                rc = pci_set_power_state(pdev, PCI_D0);
                if (rc)
                        return rc;

                /*
                 * The P600 requires a small delay when changing states.
                 * Otherwise we may think the board did not reset and we bail.
                 * This for kdump only and is particular to the P600.
                 */
                msleep(500);
        }
        return 0;
}

static void init_driver_version(char *driver_version, int len)
{
        strscpy_pad(driver_version, HPSA " " HPSA_DRIVER_VERSION, len);
}

static int write_driver_ver_to_cfgtable(struct CfgTable __iomem *cfgtable)
{
        char *driver_version;
        int i, size = sizeof(cfgtable->driver_version);

        driver_version = kmalloc(size, GFP_KERNEL);
        if (!driver_version)
                return -ENOMEM;

        init_driver_version(driver_version, size);
        for (i = 0; i < size; i++)
                writeb(driver_version[i], &cfgtable->driver_version[i]);
        kfree(driver_version);
        return 0;
}

static void read_driver_ver_from_cfgtable(struct CfgTable __iomem *cfgtable,
                                          unsigned char *driver_ver)
{
        int i;

        for (i = 0; i < sizeof(cfgtable->driver_version); i++)
                driver_ver[i] = readb(&cfgtable->driver_version[i]);
}

static int controller_reset_failed(struct CfgTable __iomem *cfgtable)
{

        char *driver_ver, *old_driver_ver;
        int rc, size = sizeof(cfgtable->driver_version);

        old_driver_ver = kmalloc_array(2, size, GFP_KERNEL);
        if (!old_driver_ver)
                return -ENOMEM;
        driver_ver = old_driver_ver + size;

        /* After a reset, the 32 bytes of "driver version" in the cfgtable
         * should have been changed, otherwise we know the reset failed.
         */
        init_driver_version(old_driver_ver, size);
        read_driver_ver_from_cfgtable(cfgtable, driver_ver);
        rc = !memcmp(driver_ver, old_driver_ver, size);
        kfree(old_driver_ver);
        return rc;
}
/* This does a hard reset of the controller using PCI power management
 * states or the using the doorbell register.
 */
static int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev, u32 board_id)
{
        u64 cfg_offset;
        u32 cfg_base_addr;
        u64 cfg_base_addr_index;
        void __iomem *vaddr;
        unsigned long paddr;
        u32 misc_fw_support;
        int rc;
        struct CfgTable __iomem *cfgtable;
        u32 use_doorbell;
        u16 command_register;

        /* For controllers as old as the P600, this is very nearly
         * the same thing as
         *
         * pci_save_state(pci_dev);
         * pci_set_power_state(pci_dev, PCI_D3hot);
         * pci_set_power_state(pci_dev, PCI_D0);
         * pci_restore_state(pci_dev);
         *
         * For controllers newer than the P600, the pci power state
         * method of resetting doesn't work so we have another way
         * using the doorbell register.
         */

        if (!ctlr_is_resettable(board_id)) {
                dev_warn(&pdev->dev, "Controller not resettable\n");
                return -ENODEV;
        }

        /* if controller is soft- but not hard resettable... */
        if (!ctlr_is_hard_resettable(board_id))
                return -ENOTSUPP; /* try soft reset later. */

        /* Save the PCI command register */
        pci_read_config_word(pdev, 4, &command_register);
        pci_save_state(pdev);

        /* find the first memory BAR, so we can find the cfg table */
        rc = hpsa_pci_find_memory_BAR(pdev, &paddr);
        if (rc)
                return rc;
        vaddr = remap_pci_mem(paddr, 0x250);
        if (!vaddr)
                return -ENOMEM;

        /* find cfgtable in order to check if reset via doorbell is supported */
        rc = hpsa_find_cfg_addrs(pdev, vaddr, &cfg_base_addr,
                                        &cfg_base_addr_index, &cfg_offset);
        if (rc)
                goto unmap_vaddr;
        cfgtable = remap_pci_mem(pci_resource_start(pdev,
                       cfg_base_addr_index) + cfg_offset, sizeof(*cfgtable));
        if (!cfgtable) {
                rc = -ENOMEM;
                goto unmap_vaddr;
        }
        rc = write_driver_ver_to_cfgtable(cfgtable);
        if (rc)
                goto unmap_cfgtable;

        /* If reset via doorbell register is supported, use that.
         * There are two such methods.  Favor the newest method.
         */
        misc_fw_support = readl(&cfgtable->misc_fw_support);
        use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET2;
        if (use_doorbell) {
                use_doorbell = DOORBELL_CTLR_RESET2;
        } else {
                use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
                if (use_doorbell) {
                        dev_warn(&pdev->dev,
                                "Soft reset not supported. Firmware update is required.\n");
                        rc = -ENOTSUPP; /* try soft reset */
                        goto unmap_cfgtable;
                }
        }

        rc = hpsa_controller_hard_reset(pdev, vaddr, use_doorbell);
        if (rc)
                goto unmap_cfgtable;

        pci_restore_state(pdev);
        pci_write_config_word(pdev, 4, command_register);

        /* Some devices (notably the HP Smart Array 5i Controller)
           need a little pause here */
        msleep(HPSA_POST_RESET_PAUSE_MSECS);

        rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_READY);
        if (rc) {
                dev_warn(&pdev->dev,
                        "Failed waiting for board to become ready after hard reset\n");
                goto unmap_cfgtable;
        }

        rc = controller_reset_failed(vaddr);
        if (rc < 0)
                goto unmap_cfgtable;
        if (rc) {
                dev_warn(&pdev->dev, "Unable to successfully reset "
                        "controller. Will try soft reset.\n");
                rc = -ENOTSUPP;
        } else {
                dev_info(&pdev->dev, "board ready after hard reset.\n");
        }

unmap_cfgtable:
        iounmap(cfgtable);

unmap_vaddr:
        iounmap(vaddr);
        return rc;
}

/*
 *  We cannot read the structure directly, for portability we must use
 *   the io functions.
 *   This is for debug only.
 */
static void print_cfg_table(struct device *dev, struct CfgTable __iomem *tb)
{
#ifdef HPSA_DEBUG
        int i;
        char temp_name[17];

        dev_info(dev, "Controller Configuration information\n");
        dev_info(dev, "------------------------------------\n");
        for (i = 0; i < 4; i++)
                temp_name[i] = readb(&(tb->Signature[i]));
        temp_name[4] = '\0';
        dev_info(dev, "   Signature = %s\n", temp_name);
        dev_info(dev, "   Spec Number = %d\n", readl(&(tb->SpecValence)));
        dev_info(dev, "   Transport methods supported = 0x%x\n",
               readl(&(tb->TransportSupport)));
        dev_info(dev, "   Transport methods active = 0x%x\n",
               readl(&(tb->TransportActive)));
        dev_info(dev, "   Requested transport Method = 0x%x\n",
               readl(&(tb->HostWrite.TransportRequest)));
        dev_info(dev, "   Coalesce Interrupt Delay = 0x%x\n",
               readl(&(tb->HostWrite.CoalIntDelay)));
        dev_info(dev, "   Coalesce Interrupt Count = 0x%x\n",
               readl(&(tb->HostWrite.CoalIntCount)));
        dev_info(dev, "   Max outstanding commands = %d\n",
               readl(&(tb->CmdsOutMax)));
        dev_info(dev, "   Bus Types = 0x%x\n", readl(&(tb->BusTypes)));
        for (i = 0; i < 16; i++)
                temp_name[i] = readb(&(tb->ServerName[i]));
        temp_name[16] = '\0';
        dev_info(dev, "   Server Name = %s\n", temp_name);
        dev_info(dev, "   Heartbeat Counter = 0x%x\n\n\n",
                readl(&(tb->HeartBeat)));
#endif                          /* HPSA_DEBUG */
}

static int find_PCI_BAR_index(struct pci_dev *pdev, unsigned long pci_bar_addr)
{
        int i, offset, mem_type, bar_type;

        if (pci_bar_addr == PCI_BASE_ADDRESS_0) /* looking for BAR zero? */
                return 0;
        offset = 0;
        for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
                bar_type = pci_resource_flags(pdev, i) & PCI_BASE_ADDRESS_SPACE;
                if (bar_type == PCI_BASE_ADDRESS_SPACE_IO)
                        offset += 4;
                else {
                        mem_type = pci_resource_flags(pdev, i) &
                            PCI_BASE_ADDRESS_MEM_TYPE_MASK;
                        switch (mem_type) {
                        case PCI_BASE_ADDRESS_MEM_TYPE_32:
                        case PCI_BASE_ADDRESS_MEM_TYPE_1M:
                                offset += 4;    /* 32 bit */
                                break;
                        case PCI_BASE_ADDRESS_MEM_TYPE_64:
                                offset += 8;
                                break;
                        default:        /* reserved in PCI 2.2 */
                                dev_warn(&pdev->dev,
                                       "base address is invalid\n");
                                return -1;
                        }
                }
                if (offset == pci_bar_addr - PCI_BASE_ADDRESS_0)
                        return i + 1;
        }
        return -1;
}

static void hpsa_disable_interrupt_mode(struct ctlr_info *h)
{
        pci_free_irq_vectors(h->pdev);
        h->msix_vectors = 0;
}

static void hpsa_setup_reply_map(struct ctlr_info *h)
{
        const struct cpumask *mask;
        unsigned int queue, cpu;

        for (queue = 0; queue < h->msix_vectors; queue++) {
                mask = pci_irq_get_affinity(h->pdev, queue);
                if (!mask)
                        goto fallback;

                for_each_cpu(cpu, mask)
                        h->reply_map[cpu] = queue;
        }
        return;

fallback:
        for_each_possible_cpu(cpu)
                h->reply_map[cpu] = 0;
}

/* If MSI/MSI-X is supported by the kernel we will try to enable it on
 * controllers that are capable. If not, we use legacy INTx mode.
 */
static int hpsa_interrupt_mode(struct ctlr_info *h)
{
        unsigned int flags = PCI_IRQ_INTX;
        int ret;

        /* Some boards advertise MSI but don't really support it */
        switch (h->board_id) {
        case 0x40700E11:
        case 0x40800E11:
        case 0x40820E11:
        case 0x40830E11:
                break;
        default:
                ret = pci_alloc_irq_vectors(h->pdev, 1, MAX_REPLY_QUEUES,
                                PCI_IRQ_MSIX | PCI_IRQ_AFFINITY);
                if (ret > 0) {
                        h->msix_vectors = ret;
                        return 0;
                }

                flags |= PCI_IRQ_MSI;
                break;
        }

        ret = pci_alloc_irq_vectors(h->pdev, 1, 1, flags);
        if (ret < 0)
                return ret;
        return 0;
}

static int hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id,
                                bool *legacy_board)
{
        int i;
        u32 subsystem_vendor_id, subsystem_device_id;

        subsystem_vendor_id = pdev->subsystem_vendor;
        subsystem_device_id = pdev->subsystem_device;
        *board_id = ((subsystem_device_id << 16) & 0xffff0000) |
                    subsystem_vendor_id;

        if (legacy_board)
                *legacy_board = false;
        for (i = 0; i < ARRAY_SIZE(products); i++)
                if (*board_id == products[i].board_id) {
                        if (products[i].access != &SA5A_access &&
                            products[i].access != &SA5B_access)
                                return i;
                        dev_warn(&pdev->dev,
                                 "legacy board ID: 0x%08x\n",
                                 *board_id);
                        if (legacy_board)
                            *legacy_board = true;
                        return i;
                }

        dev_warn(&pdev->dev, "unrecognized board ID: 0x%08x\n", *board_id);
        if (legacy_board)
                *legacy_board = true;
        return ARRAY_SIZE(products) - 1; /* generic unknown smart array */
}

static int hpsa_pci_find_memory_BAR(struct pci_dev *pdev,
                                    unsigned long *memory_bar)
{
        int i;

        for (i = 0; i < DEVICE_COUNT_RESOURCE; i++)
                if (pci_resource_flags(pdev, i) & IORESOURCE_MEM) {
                        /* addressing mode bits already removed */
                        *memory_bar = pci_resource_start(pdev, i);
                        dev_dbg(&pdev->dev, "memory BAR = %lx\n",
                                *memory_bar);
                        return 0;
                }
        dev_warn(&pdev->dev, "no memory BAR found\n");
        return -ENODEV;
}

static int hpsa_wait_for_board_state(struct pci_dev *pdev, void __iomem *vaddr,
                                     int wait_for_ready)
{
        int i, iterations;
        u32 scratchpad;
        if (wait_for_ready)
                iterations = HPSA_BOARD_READY_ITERATIONS;
        else
                iterations = HPSA_BOARD_NOT_READY_ITERATIONS;

        for (i = 0; i < iterations; i++) {
                scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET);
                if (wait_for_ready) {
                        if (scratchpad == HPSA_FIRMWARE_READY)
                                return 0;
                } else {
                        if (scratchpad != HPSA_FIRMWARE_READY)
                                return 0;
                }
                msleep(HPSA_BOARD_READY_POLL_INTERVAL_MSECS);
        }
        dev_warn(&pdev->dev, "board not ready, timed out.\n");
        return -ENODEV;
}

static int hpsa_find_cfg_addrs(struct pci_dev *pdev, void __iomem *vaddr,
                               u32 *cfg_base_addr, u64 *cfg_base_addr_index,
                               u64 *cfg_offset)
{
        *cfg_base_addr = readl(vaddr + SA5_CTCFG_OFFSET);
        *cfg_offset = readl(vaddr + SA5_CTMEM_OFFSET);
        *cfg_base_addr &= (u32) 0x0000ffff;
        *cfg_base_addr_index = find_PCI_BAR_index(pdev, *cfg_base_addr);
        if (*cfg_base_addr_index == -1) {
                dev_warn(&pdev->dev, "cannot find cfg_base_addr_index\n");
                return -ENODEV;
        }
        return 0;
}

static void hpsa_free_cfgtables(struct ctlr_info *h)
{
        if (h->transtable) {
                iounmap(h->transtable);
                h->transtable = NULL;
        }
        if (h->cfgtable) {
                iounmap(h->cfgtable);
                h->cfgtable = NULL;
        }
}

/* Find and map CISS config table and transfer table
 * several items must be unmapped (freed) later
 */
static int hpsa_find_cfgtables(struct ctlr_info *h)
{
        u64 cfg_offset;
        u32 cfg_base_addr;
        u64 cfg_base_addr_index;
        u32 trans_offset;
        int rc;

        rc = hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
                &cfg_base_addr_index, &cfg_offset);
        if (rc)
                return rc;
        h->cfgtable = remap_pci_mem(pci_resource_start(h->pdev,
                       cfg_base_addr_index) + cfg_offset, sizeof(*h->cfgtable));
        if (!h->cfgtable) {
                dev_err(&h->pdev->dev, "Failed mapping cfgtable\n");
                return -ENOMEM;
        }
        rc = write_driver_ver_to_cfgtable(h->cfgtable);
        if (rc)
                return rc;
        /* Find performant mode table. */
        trans_offset = readl(&h->cfgtable->TransMethodOffset);
        h->transtable = remap_pci_mem(pci_resource_start(h->pdev,
                                cfg_base_addr_index)+cfg_offset+trans_offset,
                                sizeof(*h->transtable));
        if (!h->transtable) {
                dev_err(&h->pdev->dev, "Failed mapping transfer table\n");
                hpsa_free_cfgtables(h);
                return -ENOMEM;
        }
        return 0;
}

static void hpsa_get_max_perf_mode_cmds(struct ctlr_info *h)
{
#define MIN_MAX_COMMANDS 16
        BUILD_BUG_ON(MIN_MAX_COMMANDS <= HPSA_NRESERVED_CMDS);

        h->max_commands = readl(&h->cfgtable->MaxPerformantModeCommands);

        /* Limit commands in memory limited kdump scenario. */
        if (reset_devices && h->max_commands > 32)
                h->max_commands = 32;

        if (h->max_commands < MIN_MAX_COMMANDS) {
                dev_warn(&h->pdev->dev,
                        "Controller reports max supported commands of %d Using %d instead. Ensure that firmware is up to date.\n",
                        h->max_commands,
                        MIN_MAX_COMMANDS);
                h->max_commands = MIN_MAX_COMMANDS;
        }
}

/* If the controller reports that the total max sg entries is greater than 512,
 * then we know that chained SG blocks work.  (Original smart arrays did not
 * support chained SG blocks and would return zero for max sg entries.)
 */
static int hpsa_supports_chained_sg_blocks(struct ctlr_info *h)
{
        return h->maxsgentries > 512;
}

/* Interrogate the hardware for some limits:
 * max commands, max SG elements without chaining, and with chaining,
 * SG chain block size, etc.
 */
static void hpsa_find_board_params(struct ctlr_info *h)
{
        hpsa_get_max_perf_mode_cmds(h);
        h->nr_cmds = h->max_commands;
        h->maxsgentries = readl(&(h->cfgtable->MaxScatterGatherElements));
        h->fw_support = readl(&(h->cfgtable->misc_fw_support));
        if (hpsa_supports_chained_sg_blocks(h)) {
                /* Limit in-command s/g elements to 32 save dma'able memory. */
                h->max_cmd_sg_entries = 32;
                h->chainsize = h->maxsgentries - h->max_cmd_sg_entries;
                h->maxsgentries--; /* save one for chain pointer */
        } else {
                /*
                 * Original smart arrays supported at most 31 s/g entries
                 * embedded inline in the command (trying to use more
                 * would lock up the controller)
                 */
                h->max_cmd_sg_entries = 31;
                h->maxsgentries = 31; /* default to traditional values */
                h->chainsize = 0;
        }

        /* Find out what task management functions are supported and cache */
        h->TMFSupportFlags = readl(&(h->cfgtable->TMFSupportFlags));
        if (!(HPSATMF_PHYS_TASK_ABORT & h->TMFSupportFlags))
                dev_warn(&h->pdev->dev, "Physical aborts not supported\n");
        if (!(HPSATMF_LOG_TASK_ABORT & h->TMFSupportFlags))
                dev_warn(&h->pdev->dev, "Logical aborts not supported\n");
        if (!(HPSATMF_IOACCEL_ENABLED & h->TMFSupportFlags))
                dev_warn(&h->pdev->dev, "HP SSD Smart Path aborts not supported\n");
}

static inline bool hpsa_CISS_signature_present(struct ctlr_info *h)
{
        if (!check_signature(h->cfgtable->Signature, "CISS", 4)) {
                dev_err(&h->pdev->dev, "not a valid CISS config table\n");
                return false;
        }
        return true;
}

static inline void hpsa_set_driver_support_bits(struct ctlr_info *h)
{
        u32 driver_support;

        driver_support = readl(&(h->cfgtable->driver_support));
        /* Need to enable prefetch in the SCSI core for 6400 in x86 */
#ifdef CONFIG_X86
        driver_support |= ENABLE_SCSI_PREFETCH;
#endif
        driver_support |= ENABLE_UNIT_ATTN;
        writel(driver_support, &(h->cfgtable->driver_support));
}

/* Disable DMA prefetch for the P600.  Otherwise an ASIC bug may result
 * in a prefetch beyond physical memory.
 */
static inline void hpsa_p600_dma_prefetch_quirk(struct ctlr_info *h)
{
        u32 dma_prefetch;

        if (h->board_id != 0x3225103C)
                return;
        dma_prefetch = readl(h->vaddr + I2O_DMA1_CFG);
        dma_prefetch |= 0x8000;
        writel(dma_prefetch, h->vaddr + I2O_DMA1_CFG);
}

static int hpsa_wait_for_clear_event_notify_ack(struct ctlr_info *h)
{
        int i;
        u32 doorbell_value;
        unsigned long flags;
        /* wait until the clear_event_notify bit 6 is cleared by controller. */
        for (i = 0; i < MAX_CLEAR_EVENT_WAIT; i++) {
                spin_lock_irqsave(&h->lock, flags);
                doorbell_value = readl(h->vaddr + SA5_DOORBELL);
                spin_unlock_irqrestore(&h->lock, flags);
                if (!(doorbell_value & DOORBELL_CLEAR_EVENTS))
                        goto done;
                /* delay and try again */
                msleep(CLEAR_EVENT_WAIT_INTERVAL);
        }
        return -ENODEV;
done:
        return 0;
}

static int hpsa_wait_for_mode_change_ack(struct ctlr_info *h)
{
        int i;
        u32 doorbell_value;
        unsigned long flags;

        /* under certain very rare conditions, this can take awhile.
         * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
         * as we enter this code.)
         */
        for (i = 0; i < MAX_MODE_CHANGE_WAIT; i++) {
                if (h->remove_in_progress)
                        goto done;
                spin_lock_irqsave(&h->lock, flags);
                doorbell_value = readl(h->vaddr + SA5_DOORBELL);
                spin_unlock_irqrestore(&h->lock, flags);
                if (!(doorbell_value & CFGTBL_ChangeReq))
                        goto done;
                /* delay and try again */
                msleep(MODE_CHANGE_WAIT_INTERVAL);
        }
        return -ENODEV;
done:
        return 0;
}

/* return -ENODEV or other reason on error, 0 on success */
static int hpsa_enter_simple_mode(struct ctlr_info *h)
{
        u32 trans_support;

        trans_support = readl(&(h->cfgtable->TransportSupport));
        if (!(trans_support & SIMPLE_MODE))
                return -ENOTSUPP;

        h->max_commands = readl(&(h->cfgtable->CmdsOutMax));

        /* Update the field, and then ring the doorbell */
        writel(CFGTBL_Trans_Simple, &(h->cfgtable->HostWrite.TransportRequest));
        writel(0, &h->cfgtable->HostWrite.command_pool_addr_hi);
        writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
        if (hpsa_wait_for_mode_change_ack(h))
                goto error;
        print_cfg_table(&h->pdev->dev, h->cfgtable);
        if (!(readl(&(h->cfgtable->TransportActive)) & CFGTBL_Trans_Simple))
                goto error;
        h->transMethod = CFGTBL_Trans_Simple;
        return 0;
error:
        dev_err(&h->pdev->dev, "failed to enter simple mode\n");
        return -ENODEV;
}

/* free items allocated or mapped by hpsa_pci_init */
static void hpsa_free_pci_init(struct ctlr_info *h)
{
        hpsa_free_cfgtables(h);                 /* pci_init 4 */
        iounmap(h->vaddr);                      /* pci_init 3 */
        h->vaddr = NULL;
        hpsa_disable_interrupt_mode(h);         /* pci_init 2 */
        /*
         * call pci_disable_device before pci_release_regions per
         * Documentation/driver-api/pci/pci.rst
         */
        pci_disable_device(h->pdev);            /* pci_init 1 */
        pci_release_regions(h->pdev);           /* pci_init 2 */
}

/* several items must be freed later */
static int hpsa_pci_init(struct ctlr_info *h)
{
        int prod_index, err;
        bool legacy_board;

        prod_index = hpsa_lookup_board_id(h->pdev, &h->board_id, &legacy_board);
        if (prod_index < 0)
                return prod_index;
        h->product_name = products[prod_index].product_name;
        h->access = *(products[prod_index].access);
        h->legacy_board = legacy_board;
        pci_disable_link_state(h->pdev, PCIE_LINK_STATE_L0S |
                               PCIE_LINK_STATE_L1 | PCIE_LINK_STATE_CLKPM);

        err = pci_enable_device(h->pdev);
        if (err) {
                dev_err(&h->pdev->dev, "failed to enable PCI device\n");
                pci_disable_device(h->pdev);
                return err;
        }

        err = pci_request_regions(h->pdev, HPSA);
        if (err) {
                dev_err(&h->pdev->dev,
                        "failed to obtain PCI resources\n");
                pci_disable_device(h->pdev);
                return err;
        }

        pci_set_master(h->pdev);

        err = hpsa_interrupt_mode(h);
        if (err)
                goto clean1;

        /* setup mapping between CPU and reply queue */
        hpsa_setup_reply_map(h);

        err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr);
        if (err)
                goto clean2;    /* intmode+region, pci */
        h->vaddr = remap_pci_mem(h->paddr, 0x250);
        if (!h->vaddr) {
                dev_err(&h->pdev->dev, "failed to remap PCI mem\n");
                err = -ENOMEM;
                goto clean2;    /* intmode+region, pci */
        }
        err = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
        if (err)
                goto clean3;    /* vaddr, intmode+region, pci */
        err = hpsa_find_cfgtables(h);
        if (err)
                goto clean3;    /* vaddr, intmode+region, pci */
        hpsa_find_board_params(h);

        if (!hpsa_CISS_signature_present(h)) {
                err = -ENODEV;
                goto clean4;    /* cfgtables, vaddr, intmode+region, pci */
        }
        hpsa_set_driver_support_bits(h);
        hpsa_p600_dma_prefetch_quirk(h);
        err = hpsa_enter_simple_mode(h);
        if (err)
                goto clean4;    /* cfgtables, vaddr, intmode+region, pci */
        return 0;

clean4: /* cfgtables, vaddr, intmode+region, pci */
        hpsa_free_cfgtables(h);
clean3: /* vaddr, intmode+region, pci */
        iounmap(h->vaddr);
        h->vaddr = NULL;
clean2: /* intmode+region, pci */
        hpsa_disable_interrupt_mode(h);
clean1:
        /*
         * call pci_disable_device before pci_release_regions per
         * Documentation/driver-api/pci/pci.rst
         */
        pci_disable_device(h->pdev);
        pci_release_regions(h->pdev);
        return err;
}

static void hpsa_hba_inquiry(struct ctlr_info *h)
{
        int rc;

#define HBA_INQUIRY_BYTE_COUNT 64
        h->hba_inquiry_data = kmalloc(HBA_INQUIRY_BYTE_COUNT, GFP_KERNEL);
        if (!h->hba_inquiry_data)
                return;
        rc = hpsa_scsi_do_inquiry(h, RAID_CTLR_LUNID, 0,
                h->hba_inquiry_data, HBA_INQUIRY_BYTE_COUNT);
        if (rc != 0) {
                kfree(h->hba_inquiry_data);
                h->hba_inquiry_data = NULL;
        }
}

static int hpsa_init_reset_devices(struct pci_dev *pdev, u32 board_id)
{
        int rc, i;
        void __iomem *vaddr;

        if (!reset_devices)
                return 0;

        /* kdump kernel is loading, we don't know in which state is
         * the pci interface. The dev->enable_cnt is equal zero
         * so we call enable+disable, wait a while and switch it on.
         */
        rc = pci_enable_device(pdev);
        if (rc) {
                dev_warn(&pdev->dev, "Failed to enable PCI device\n");
                return -ENODEV;
        }
        pci_disable_device(pdev);
        msleep(260);                    /* a randomly chosen number */
        rc = pci_enable_device(pdev);
        if (rc) {
                dev_warn(&pdev->dev, "failed to enable device.\n");
                return -ENODEV;
        }

        pci_set_master(pdev);

        vaddr = pci_ioremap_bar(pdev, 0);
        if (vaddr == NULL) {
                rc = -ENOMEM;
                goto out_disable;
        }
        writel(SA5_INTR_OFF, vaddr + SA5_REPLY_INTR_MASK_OFFSET);
        iounmap(vaddr);

        /* Reset the controller with a PCI power-cycle or via doorbell */
        rc = hpsa_kdump_hard_reset_controller(pdev, board_id);

        /* -ENOTSUPP here means we cannot reset the controller
         * but it's already (and still) up and running in
         * "performant mode".  Or, it might be 640x, which can't reset
         * due to concerns about shared bbwc between 6402/6404 pair.
         */
        if (rc)
                goto out_disable;

        /* Now try to get the controller to respond to a no-op */
        dev_info(&pdev->dev, "Waiting for controller to respond to no-op\n");
        for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) {
                if (hpsa_noop(pdev) == 0)
                        break;
                else
                        dev_warn(&pdev->dev, "no-op failed%s\n",
                                        (i < 11 ? "; re-trying" : ""));
        }

out_disable:

        pci_disable_device(pdev);
        return rc;
}

static void hpsa_free_cmd_pool(struct ctlr_info *h)
{
        bitmap_free(h->cmd_pool_bits);
        h->cmd_pool_bits = NULL;
        if (h->cmd_pool) {
                dma_free_coherent(&h->pdev->dev,
                                h->nr_cmds * sizeof(struct CommandList),
                                h->cmd_pool,
                                h->cmd_pool_dhandle);
                h->cmd_pool = NULL;
                h->cmd_pool_dhandle = 0;
        }
        if (h->errinfo_pool) {
                dma_free_coherent(&h->pdev->dev,
                                h->nr_cmds * sizeof(struct ErrorInfo),
                                h->errinfo_pool,
                                h->errinfo_pool_dhandle);
                h->errinfo_pool = NULL;
                h->errinfo_pool_dhandle = 0;
        }
}

static int hpsa_alloc_cmd_pool(struct ctlr_info *h)
{
        h->cmd_pool_bits = bitmap_zalloc(h->nr_cmds, GFP_KERNEL);
        h->cmd_pool = dma_alloc_coherent(&h->pdev->dev,
                    h->nr_cmds * sizeof(*h->cmd_pool),
                    &h->cmd_pool_dhandle, GFP_KERNEL);
        h->errinfo_pool = dma_alloc_coherent(&h->pdev->dev,
                    h->nr_cmds * sizeof(*h->errinfo_pool),
                    &h->errinfo_pool_dhandle, GFP_KERNEL);
        if ((h->cmd_pool_bits == NULL)
            || (h->cmd_pool == NULL)
            || (h->errinfo_pool == NULL)) {
                dev_err(&h->pdev->dev, "out of memory in %s", __func__);
                goto clean_up;
        }
        hpsa_preinitialize_commands(h);
        return 0;
clean_up:
        hpsa_free_cmd_pool(h);
        return -ENOMEM;
}

/* clear affinity hints and free MSI-X, MSI, or legacy INTx vectors */
static void hpsa_free_irqs(struct ctlr_info *h)
{
        int i;
        int irq_vector = 0;

        if (hpsa_simple_mode)
                irq_vector = h->intr_mode;

        if (!h->msix_vectors || h->intr_mode != PERF_MODE_INT) {
                /* Single reply queue, only one irq to free */
                free_irq(pci_irq_vector(h->pdev, irq_vector),
                                &h->q[h->intr_mode]);
                h->q[h->intr_mode] = 0;
                return;
        }

        for (i = 0; i < h->msix_vectors; i++) {
                free_irq(pci_irq_vector(h->pdev, i), &h->q[i]);
                h->q[i] = 0;
        }
        for (; i < MAX_REPLY_QUEUES; i++)
                h->q[i] = 0;
}

/* returns 0 on success; cleans up and returns -Enn on error */
static int hpsa_request_irqs(struct ctlr_info *h,
        irqreturn_t (*msixhandler)(int, void *),
        irqreturn_t (*intxhandler)(int, void *))
{
        int rc, i;
        int irq_vector = 0;

        if (hpsa_simple_mode)
                irq_vector = h->intr_mode;

        /*
         * initialize h->q[x] = x so that interrupt handlers know which
         * queue to process.
         */
        for (i = 0; i < MAX_REPLY_QUEUES; i++)
                h->q[i] = (u8) i;

        if (h->intr_mode == PERF_MODE_INT && h->msix_vectors > 0) {
                /* If performant mode and MSI-X, use multiple reply queues */
                for (i = 0; i < h->msix_vectors; i++) {
                        sprintf(h->intrname[i], "%s-msix%d", h->devname, i);
                        rc = request_irq(pci_irq_vector(h->pdev, i), msixhandler,
                                        0, h->intrname[i],
                                        &h->q[i]);
                        if (rc) {
                                int j;

                                dev_err(&h->pdev->dev,
                                        "failed to get irq %d for %s\n",
                                       pci_irq_vector(h->pdev, i), h->devname);
                                for (j = 0; j < i; j++) {
                                        free_irq(pci_irq_vector(h->pdev, j), &h->q[j]);
                                        h->q[j] = 0;
                                }
                                for (; j < MAX_REPLY_QUEUES; j++)
                                        h->q[j] = 0;
                                return rc;
                        }
                }
        } else {
                /* Use single reply pool */
                if (h->msix_vectors > 0 || h->pdev->msi_enabled) {
                        sprintf(h->intrname[0], "%s-msi%s", h->devname,
                                h->msix_vectors ? "x" : "");
                        rc = request_irq(pci_irq_vector(h->pdev, irq_vector),
                                msixhandler, 0,
                                h->intrname[0],
                                &h->q[h->intr_mode]);
                } else {
                        sprintf(h->intrname[h->intr_mode],
                                "%s-intx", h->devname);
                        rc = request_irq(pci_irq_vector(h->pdev, irq_vector),
                                intxhandler, IRQF_SHARED,
                                h->intrname[0],
                                &h->q[h->intr_mode]);
                }
        }
        if (rc) {
                dev_err(&h->pdev->dev, "failed to get irq %d for %s\n",
                       pci_irq_vector(h->pdev, irq_vector), h->devname);
                hpsa_free_irqs(h);
                return -ENODEV;
        }
        return 0;
}

static int hpsa_kdump_soft_reset(struct ctlr_info *h)
{
        int rc;
        hpsa_send_host_reset(h, HPSA_RESET_TYPE_CONTROLLER);

        dev_info(&h->pdev->dev, "Waiting for board to soft reset.\n");
        rc = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_NOT_READY);
        if (rc) {
                dev_warn(&h->pdev->dev, "Soft reset had no effect.\n");
                return rc;
        }

        dev_info(&h->pdev->dev, "Board reset, awaiting READY status.\n");
        rc = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
        if (rc) {
                dev_warn(&h->pdev->dev, "Board failed to become ready "
                        "after soft reset.\n");
                return rc;
        }

        return 0;
}

static void hpsa_free_reply_queues(struct ctlr_info *h)
{
        int i;

        for (i = 0; i < h->nreply_queues; i++) {
                if (!h->reply_queue[i].head)
                        continue;
                dma_free_coherent(&h->pdev->dev,
                                        h->reply_queue_size,
                                        h->reply_queue[i].head,
                                        h->reply_queue[i].busaddr);
                h->reply_queue[i].head = NULL;
                h->reply_queue[i].busaddr = 0;
        }
        h->reply_queue_size = 0;
}

static void hpsa_undo_allocations_after_kdump_soft_reset(struct ctlr_info *h)
{
        hpsa_free_performant_mode(h);           /* init_one 7 */
        hpsa_free_sg_chain_blocks(h);           /* init_one 6 */
        hpsa_free_cmd_pool(h);                  /* init_one 5 */
        hpsa_free_irqs(h);                      /* init_one 4 */
        scsi_host_put(h->scsi_host);            /* init_one 3 */
        h->scsi_host = NULL;                    /* init_one 3 */
        hpsa_free_pci_init(h);                  /* init_one 2_5 */
        free_percpu(h->lockup_detected);        /* init_one 2 */
        h->lockup_detected = NULL;              /* init_one 2 */
        if (h->resubmit_wq) {
                destroy_workqueue(h->resubmit_wq);      /* init_one 1 */
                h->resubmit_wq = NULL;
        }
        if (h->rescan_ctlr_wq) {
                destroy_workqueue(h->rescan_ctlr_wq);
                h->rescan_ctlr_wq = NULL;
        }
        if (h->monitor_ctlr_wq) {
                destroy_workqueue(h->monitor_ctlr_wq);
                h->monitor_ctlr_wq = NULL;
        }

        kfree(h);                               /* init_one 1 */
}

/* Called when controller lockup detected. */
static void fail_all_outstanding_cmds(struct ctlr_info *h)
{
        int i, refcount;
        struct CommandList *c;
        int failcount = 0;

        flush_workqueue(h->resubmit_wq); /* ensure all cmds are fully built */
        for (i = 0; i < h->nr_cmds; i++) {
                c = h->cmd_pool + i;
                refcount = atomic_inc_return(&c->refcount);
                if (refcount > 1) {
                        c->err_info->CommandStatus = CMD_CTLR_LOCKUP;
                        finish_cmd(c);
                        atomic_dec(&h->commands_outstanding);
                        failcount++;
                }
                cmd_free(h, c);
        }
        dev_warn(&h->pdev->dev,
                "failed %d commands in fail_all\n", failcount);
}

static void set_lockup_detected_for_all_cpus(struct ctlr_info *h, u32 value)
{
        int cpu;

        for_each_online_cpu(cpu) {
                u32 *lockup_detected;
                lockup_detected = per_cpu_ptr(h->lockup_detected, cpu);
                *lockup_detected = value;
        }
        wmb(); /* be sure the per-cpu variables are out to memory */
}

static void controller_lockup_detected(struct ctlr_info *h)
{
        unsigned long flags;
        u32 lockup_detected;

        h->access.set_intr_mask(h, HPSA_INTR_OFF);
        spin_lock_irqsave(&h->lock, flags);
        lockup_detected = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
        if (!lockup_detected) {
                /* no heartbeat, but controller gave us a zero. */
                dev_warn(&h->pdev->dev,
                        "lockup detected after %d but scratchpad register is zero\n",
                        h->heartbeat_sample_interval / HZ);
                lockup_detected = 0xffffffff;
        }
        set_lockup_detected_for_all_cpus(h, lockup_detected);
        spin_unlock_irqrestore(&h->lock, flags);
        dev_warn(&h->pdev->dev, "Controller lockup detected: 0x%08x after %d\n",
                        lockup_detected, h->heartbeat_sample_interval / HZ);
        if (lockup_detected == 0xffff0000) {
                dev_warn(&h->pdev->dev, "Telling controller to do a CHKPT\n");
                writel(DOORBELL_GENERATE_CHKPT, h->vaddr + SA5_DOORBELL);
        }
        pci_disable_device(h->pdev);
        fail_all_outstanding_cmds(h);
}

static int detect_controller_lockup(struct ctlr_info *h)
{
        u64 now;
        u32 heartbeat;
        unsigned long flags;

        now = get_jiffies_64();
        /* If we've received an interrupt recently, we're ok. */
        if (time_after64(h->last_intr_timestamp +
                                (h->heartbeat_sample_interval), now))
                return false;

        /*
         * If we've already checked the heartbeat recently, we're ok.
         * This could happen if someone sends us a signal. We
         * otherwise don't care about signals in this thread.
         */
        if (time_after64(h->last_heartbeat_timestamp +
                                (h->heartbeat_sample_interval), now))
                return false;

        /* If heartbeat has not changed since we last looked, we're not ok. */
        spin_lock_irqsave(&h->lock, flags);
        heartbeat = readl(&h->cfgtable->HeartBeat);
        spin_unlock_irqrestore(&h->lock, flags);
        if (h->last_heartbeat == heartbeat) {
                controller_lockup_detected(h);
                return true;
        }

        /* We're ok. */
        h->last_heartbeat = heartbeat;
        h->last_heartbeat_timestamp = now;
        return false;
}

/*
 * Set ioaccel status for all ioaccel volumes.
 *
 * Called from monitor controller worker (hpsa_event_monitor_worker)
 *
 * A Volume (or Volumes that comprise an Array set) may be undergoing a
 * transformation, so we will be turning off ioaccel for all volumes that
 * make up the Array.
 */
static void hpsa_set_ioaccel_status(struct ctlr_info *h)
{
        int rc;
        int i;
        u8 ioaccel_status;
        unsigned char *buf;
        struct hpsa_scsi_dev_t *device;

        if (!h)
                return;

        buf = kmalloc(64, GFP_KERNEL);
        if (!buf)
                return;

        /*
         * Run through current device list used during I/O requests.
         */
        for (i = 0; i < h->ndevices; i++) {
                int offload_to_be_enabled = 0;
                int offload_config = 0;

                device = h->dev[i];

                if (!device)
                        continue;
                if (!hpsa_vpd_page_supported(h, device->scsi3addr,
                                                HPSA_VPD_LV_IOACCEL_STATUS))
                        continue;

                memset(buf, 0, 64);

                rc = hpsa_scsi_do_inquiry(h, device->scsi3addr,
                                        VPD_PAGE | HPSA_VPD_LV_IOACCEL_STATUS,
                                        buf, 64);
                if (rc != 0)
                        continue;

                ioaccel_status = buf[IOACCEL_STATUS_BYTE];

                /*
                 * Check if offload is still configured on
                 */
                offload_config =
                                !!(ioaccel_status & OFFLOAD_CONFIGURED_BIT);
                /*
                 * If offload is configured on, check to see if ioaccel
                 * needs to be enabled.
                 */
                if (offload_config)
                        offload_to_be_enabled =
                                !!(ioaccel_status & OFFLOAD_ENABLED_BIT);

                /*
                 * If ioaccel is to be re-enabled, re-enable later during the
                 * scan operation so the driver can get a fresh raidmap
                 * before turning ioaccel back on.
                 */
                if (offload_to_be_enabled)
                        continue;

                /*
                 * Immediately turn off ioaccel for any volume the
                 * controller tells us to. Some of the reasons could be:
                 *    transformation - change to the LVs of an Array.
                 *    degraded volume - component failure
                 */
                hpsa_turn_off_ioaccel_for_device(device);
        }

        kfree(buf);
}

static void hpsa_ack_ctlr_events(struct ctlr_info *h)
{
        char *event_type;

        if (!(h->fw_support & MISC_FW_EVENT_NOTIFY))
                return;

        /* Ask the controller to clear the events we're handling. */
        if ((h->transMethod & (CFGTBL_Trans_io_accel1
                        | CFGTBL_Trans_io_accel2)) &&
                (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE ||
                 h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE)) {

                if (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_STATE_CHANGE)
                        event_type = "state change";
                if (h->events & HPSA_EVENT_NOTIFY_ACCEL_IO_PATH_CONFIG_CHANGE)
                        event_type = "configuration change";
                /* Stop sending new RAID offload reqs via the IO accelerator */
                scsi_block_requests(h->scsi_host);
                hpsa_set_ioaccel_status(h);
                hpsa_drain_accel_commands(h);
                /* Set 'accelerator path config change' bit */
                dev_warn(&h->pdev->dev,
                        "Acknowledging event: 0x%08x (HP SSD Smart Path %s)\n",
                        h->events, event_type);
                writel(h->events, &(h->cfgtable->clear_event_notify));
                /* Set the "clear event notify field update" bit 6 */
                writel(DOORBELL_CLEAR_EVENTS, h->vaddr + SA5_DOORBELL);
                /* Wait until ctlr clears 'clear event notify field', bit 6 */
                hpsa_wait_for_clear_event_notify_ack(h);
                scsi_unblock_requests(h->scsi_host);
        } else {
                /* Acknowledge controller notification events. */
                writel(h->events, &(h->cfgtable->clear_event_notify));
                writel(DOORBELL_CLEAR_EVENTS, h->vaddr + SA5_DOORBELL);
                hpsa_wait_for_clear_event_notify_ack(h);
        }
        return;
}

/* Check a register on the controller to see if there are configuration
 * changes (added/changed/removed logical drives, etc.) which mean that
 * we should rescan the controller for devices.
 * Also check flag for driver-initiated rescan.
 */
static int hpsa_ctlr_needs_rescan(struct ctlr_info *h)
{
        if (h->drv_req_rescan) {
                h->drv_req_rescan = 0;
                return 1;
        }

        if (!(h->fw_support & MISC_FW_EVENT_NOTIFY))
                return 0;

        h->events = readl(&(h->cfgtable->event_notify));
        return h->events & RESCAN_REQUIRED_EVENT_BITS;
}

/*
 * Check if any of the offline devices have become ready
 */
static int hpsa_offline_devices_ready(struct ctlr_info *h)
{
        unsigned long flags;
        struct offline_device_entry *d;
        struct list_head *this, *tmp;

        spin_lock_irqsave(&h->offline_device_lock, flags);
        list_for_each_safe(this, tmp, &h->offline_device_list) {
                d = list_entry(this, struct offline_device_entry,
                                offline_list);
                spin_unlock_irqrestore(&h->offline_device_lock, flags);
                if (!hpsa_volume_offline(h, d->scsi3addr)) {
                        spin_lock_irqsave(&h->offline_device_lock, flags);
                        list_del(&d->offline_list);
                        spin_unlock_irqrestore(&h->offline_device_lock, flags);
                        return 1;
                }
                spin_lock_irqsave(&h->offline_device_lock, flags);
        }
        spin_unlock_irqrestore(&h->offline_device_lock, flags);
        return 0;
}

static int hpsa_luns_changed(struct ctlr_info *h)
{
        int rc = 1; /* assume there are changes */
        struct ReportLUNdata *logdev = NULL;

        /* if we can't find out if lun data has changed,
         * assume that it has.
         */

        if (!h->lastlogicals)
                return rc;

        logdev = kzalloc_obj(*logdev);
        if (!logdev)
                return rc;

        if (hpsa_scsi_do_report_luns(h, 1, logdev, sizeof(*logdev), 0)) {
                dev_warn(&h->pdev->dev,
                        "report luns failed, can't track lun changes.\n");
                goto out;
        }
        if (memcmp(logdev, h->lastlogicals, sizeof(*logdev))) {
                dev_info(&h->pdev->dev,
                        "Lun changes detected.\n");
                memcpy(h->lastlogicals, logdev, sizeof(*logdev));
                goto out;
        } else
                rc = 0; /* no changes detected. */
out:
        kfree(logdev);
        return rc;
}

static void hpsa_perform_rescan(struct ctlr_info *h)
{
        struct Scsi_Host *sh = NULL;
        unsigned long flags;

        /*
         * Do the scan after the reset
         */
        spin_lock_irqsave(&h->reset_lock, flags);
        if (h->reset_in_progress) {
                h->drv_req_rescan = 1;
                spin_unlock_irqrestore(&h->reset_lock, flags);
                return;
        }
        spin_unlock_irqrestore(&h->reset_lock, flags);

        sh = scsi_host_get(h->scsi_host);
        if (sh != NULL) {
                hpsa_scan_start(sh);
                scsi_host_put(sh);
                h->drv_req_rescan = 0;
        }
}

/*
 * watch for controller events
 */
static void hpsa_event_monitor_worker(struct work_struct *work)
{
        struct ctlr_info *h = container_of(to_delayed_work(work),
                                        struct ctlr_info, event_monitor_work);
        unsigned long flags;

        spin_lock_irqsave(&h->lock, flags);
        if (h->remove_in_progress) {
                spin_unlock_irqrestore(&h->lock, flags);
                return;
        }
        spin_unlock_irqrestore(&h->lock, flags);

        if (hpsa_ctlr_needs_rescan(h)) {
                hpsa_ack_ctlr_events(h);
                hpsa_perform_rescan(h);
        }

        spin_lock_irqsave(&h->lock, flags);
        if (!h->remove_in_progress)
                queue_delayed_work(h->monitor_ctlr_wq, &h->event_monitor_work,
                                HPSA_EVENT_MONITOR_INTERVAL);
        spin_unlock_irqrestore(&h->lock, flags);
}

static void hpsa_rescan_ctlr_worker(struct work_struct *work)
{
        unsigned long flags;
        struct ctlr_info *h = container_of(to_delayed_work(work),
                                        struct ctlr_info, rescan_ctlr_work);

        spin_lock_irqsave(&h->lock, flags);
        if (h->remove_in_progress) {
                spin_unlock_irqrestore(&h->lock, flags);
                return;
        }
        spin_unlock_irqrestore(&h->lock, flags);

        if (h->drv_req_rescan || hpsa_offline_devices_ready(h)) {
                hpsa_perform_rescan(h);
        } else if (h->discovery_polling) {
                if (hpsa_luns_changed(h)) {
                        dev_info(&h->pdev->dev,
                                "driver discovery polling rescan.\n");
                        hpsa_perform_rescan(h);
                }
        }
        spin_lock_irqsave(&h->lock, flags);
        if (!h->remove_in_progress)
                queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work,
                                h->heartbeat_sample_interval);
        spin_unlock_irqrestore(&h->lock, flags);
}

static void hpsa_monitor_ctlr_worker(struct work_struct *work)
{
        unsigned long flags;
        struct ctlr_info *h = container_of(to_delayed_work(work),
                                        struct ctlr_info, monitor_ctlr_work);

        detect_controller_lockup(h);
        if (lockup_detected(h))
                return;

        spin_lock_irqsave(&h->lock, flags);
        if (!h->remove_in_progress)
                queue_delayed_work(h->monitor_ctlr_wq, &h->monitor_ctlr_work,
                                h->heartbeat_sample_interval);
        spin_unlock_irqrestore(&h->lock, flags);
}

static struct workqueue_struct *hpsa_create_controller_wq(struct ctlr_info *h,
                                                char *name)
{
        struct workqueue_struct *wq = NULL;

        wq = alloc_ordered_workqueue("%s_%d_hpsa", 0, name, h->ctlr);
        if (!wq)
                dev_err(&h->pdev->dev, "failed to create %s workqueue\n", name);

        return wq;
}

static void hpda_free_ctlr_info(struct ctlr_info *h)
{
        kfree(h->reply_map);
        kfree(h);
}

static struct ctlr_info *hpda_alloc_ctlr_info(void)
{
        struct ctlr_info *h;

        h = kzalloc_obj(*h);
        if (!h)
                return NULL;

        h->reply_map = kcalloc(nr_cpu_ids, sizeof(*h->reply_map), GFP_KERNEL);
        if (!h->reply_map) {
                kfree(h);
                return NULL;
        }
        return h;
}

static int hpsa_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
        int rc;
        struct ctlr_info *h;
        int try_soft_reset = 0;
        unsigned long flags;
        u32 board_id;

        if (number_of_controllers == 0)
                printk(KERN_INFO DRIVER_NAME "\n");

        rc = hpsa_lookup_board_id(pdev, &board_id, NULL);
        if (rc < 0) {
                dev_warn(&pdev->dev, "Board ID not found\n");
                return rc;
        }

        rc = hpsa_init_reset_devices(pdev, board_id);
        if (rc) {
                if (rc != -ENOTSUPP)
                        return rc;
                /* If the reset fails in a particular way (it has no way to do
                 * a proper hard reset, so returns -ENOTSUPP) we can try to do
                 * a soft reset once we get the controller configured up to the
                 * point that it can accept a command.
                 */
                try_soft_reset = 1;
                rc = 0;
        }

reinit_after_soft_reset:

        /* Command structures must be aligned on a 32-byte boundary because
         * the 5 lower bits of the address are used by the hardware. and by
         * the driver.  See comments in hpsa.h for more info.
         */
        BUILD_BUG_ON(sizeof(struct CommandList) % COMMANDLIST_ALIGNMENT);
        h = hpda_alloc_ctlr_info();
        if (!h) {
                dev_err(&pdev->dev, "Failed to allocate controller head\n");
                return -ENOMEM;
        }

        h->pdev = pdev;

        h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
        INIT_LIST_HEAD(&h->offline_device_list);
        spin_lock_init(&h->lock);
        spin_lock_init(&h->offline_device_lock);
        spin_lock_init(&h->scan_lock);
        spin_lock_init(&h->reset_lock);
        atomic_set(&h->passthru_cmds_avail, HPSA_MAX_CONCURRENT_PASSTHRUS);

        /* Allocate and clear per-cpu variable lockup_detected */
        h->lockup_detected = alloc_percpu(u32);
        if (!h->lockup_detected) {
                dev_err(&h->pdev->dev, "Failed to allocate lockup detector\n");
                rc = -ENOMEM;
                goto clean1;    /* aer/h */
        }
        set_lockup_detected_for_all_cpus(h, 0);

        rc = hpsa_pci_init(h);
        if (rc)
                goto clean2;    /* lu, aer/h */

        /* relies on h-> settings made by hpsa_pci_init, including
         * interrupt_mode h->intr */
        rc = hpsa_scsi_host_alloc(h);
        if (rc)
                goto clean2_5;  /* pci, lu, aer/h */

        sprintf(h->devname, HPSA "%d", h->scsi_host->host_no);
        h->ctlr = number_of_controllers;
        number_of_controllers++;

        /* configure PCI DMA stuff */
        rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64));
        if (rc != 0) {
                rc = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
                if (rc != 0) {
                        dev_err(&pdev->dev, "no suitable DMA available\n");
                        goto clean3;    /* shost, pci, lu, aer/h */
                }
        }

        /* make sure the board interrupts are off */
        h->access.set_intr_mask(h, HPSA_INTR_OFF);

        rc = hpsa_request_irqs(h, do_hpsa_intr_msi, do_hpsa_intr_intx);
        if (rc)
                goto clean3;    /* shost, pci, lu, aer/h */
        rc = hpsa_alloc_cmd_pool(h);
        if (rc)
                goto clean4;    /* irq, shost, pci, lu, aer/h */
        rc = hpsa_alloc_sg_chain_blocks(h);
        if (rc)
                goto clean5;    /* cmd, irq, shost, pci, lu, aer/h */
        init_waitqueue_head(&h->scan_wait_queue);
        init_waitqueue_head(&h->event_sync_wait_queue);
        mutex_init(&h->reset_mutex);
        h->scan_finished = 1; /* no scan currently in progress */
        h->scan_waiting = 0;

        pci_set_drvdata(pdev, h);
        h->ndevices = 0;

        spin_lock_init(&h->devlock);
        rc = hpsa_put_ctlr_into_performant_mode(h);
        if (rc)
                goto clean6; /* sg, cmd, irq, shost, pci, lu, aer/h */

        /* create the resubmit workqueue */
        h->rescan_ctlr_wq = hpsa_create_controller_wq(h, "rescan");
        if (!h->rescan_ctlr_wq) {
                rc = -ENOMEM;
                goto clean7;
        }

        h->resubmit_wq = hpsa_create_controller_wq(h, "resubmit");
        if (!h->resubmit_wq) {
                rc = -ENOMEM;
                goto clean7;    /* aer/h */
        }

        h->monitor_ctlr_wq = hpsa_create_controller_wq(h, "monitor");
        if (!h->monitor_ctlr_wq) {
                rc = -ENOMEM;
                goto clean7;
        }

        /*
         * At this point, the controller is ready to take commands.
         * Now, if reset_devices and the hard reset didn't work, try
         * the soft reset and see if that works.
         */
        if (try_soft_reset) {

                /* This is kind of gross.  We may or may not get a completion
                 * from the soft reset command, and if we do, then the value
                 * from the fifo may or may not be valid.  So, we wait 10 secs
                 * after the reset throwing away any completions we get during
                 * that time.  Unregister the interrupt handler and register
                 * fake ones to scoop up any residual completions.
                 */
                spin_lock_irqsave(&h->lock, flags);
                h->access.set_intr_mask(h, HPSA_INTR_OFF);
                spin_unlock_irqrestore(&h->lock, flags);
                hpsa_free_irqs(h);
                rc = hpsa_request_irqs(h, hpsa_msix_discard_completions,
                                        hpsa_intx_discard_completions);
                if (rc) {
                        dev_warn(&h->pdev->dev,
                                "Failed to request_irq after soft reset.\n");
                        /*
                         * cannot goto clean7 or free_irqs will be called
                         * again. Instead, do its work
                         */
                        hpsa_free_performant_mode(h);   /* clean7 */
                        hpsa_free_sg_chain_blocks(h);   /* clean6 */
                        hpsa_free_cmd_pool(h);          /* clean5 */
                        /*
                         * skip hpsa_free_irqs(h) clean4 since that
                         * was just called before request_irqs failed
                         */
                        goto clean3;
                }

                rc = hpsa_kdump_soft_reset(h);
                if (rc)
                        /* Neither hard nor soft reset worked, we're hosed. */
                        goto clean7;

                dev_info(&h->pdev->dev, "Board READY.\n");
                dev_info(&h->pdev->dev,
                        "Waiting for stale completions to drain.\n");
                h->access.set_intr_mask(h, HPSA_INTR_ON);
                msleep(10000);
                h->access.set_intr_mask(h, HPSA_INTR_OFF);

                rc = controller_reset_failed(h->cfgtable);
                if (rc)
                        dev_info(&h->pdev->dev,
                                "Soft reset appears to have failed.\n");

                /* since the controller's reset, we have to go back and re-init
                 * everything.  Easiest to just forget what we've done and do it
                 * all over again.
                 */
                hpsa_undo_allocations_after_kdump_soft_reset(h);
                try_soft_reset = 0;
                if (rc)
                        /* don't goto clean, we already unallocated */
                        return -ENODEV;

                goto reinit_after_soft_reset;
        }

        /* Enable Accelerated IO path at driver layer */
        h->acciopath_status = 1;
        /* Disable discovery polling.*/
        h->discovery_polling = 0;


        /* Turn the interrupts on so we can service requests */
        h->access.set_intr_mask(h, HPSA_INTR_ON);

        hpsa_hba_inquiry(h);

        h->lastlogicals = kzalloc_obj(*(h->lastlogicals));
        if (!h->lastlogicals)
                dev_info(&h->pdev->dev,
                        "Can't track change to report lun data\n");

        /* hook into SCSI subsystem */
        rc = hpsa_scsi_add_host(h);
        if (rc)
                goto clean8; /* lastlogicals, perf, sg, cmd, irq, shost, pci, lu, aer/h */

        /* Monitor the controller for firmware lockups */
        h->heartbeat_sample_interval = HEARTBEAT_SAMPLE_INTERVAL;
        INIT_DELAYED_WORK(&h->monitor_ctlr_work, hpsa_monitor_ctlr_worker);
        schedule_delayed_work(&h->monitor_ctlr_work,
                                h->heartbeat_sample_interval);
        INIT_DELAYED_WORK(&h->rescan_ctlr_work, hpsa_rescan_ctlr_worker);
        queue_delayed_work(h->rescan_ctlr_wq, &h->rescan_ctlr_work,
                                h->heartbeat_sample_interval);
        INIT_DELAYED_WORK(&h->event_monitor_work, hpsa_event_monitor_worker);
        schedule_delayed_work(&h->event_monitor_work,
                                HPSA_EVENT_MONITOR_INTERVAL);
        return 0;

clean8: /* lastlogicals, perf, sg, cmd, irq, shost, pci, lu, aer/h */
        kfree(h->lastlogicals);
clean7: /* perf, sg, cmd, irq, shost, pci, lu, aer/h */
        hpsa_free_performant_mode(h);
        h->access.set_intr_mask(h, HPSA_INTR_OFF);
clean6: /* sg, cmd, irq, pci, lockup, wq/aer/h */
        hpsa_free_sg_chain_blocks(h);
clean5: /* cmd, irq, shost, pci, lu, aer/h */
        hpsa_free_cmd_pool(h);
clean4: /* irq, shost, pci, lu, aer/h */
        hpsa_free_irqs(h);
clean3: /* shost, pci, lu, aer/h */
        scsi_host_put(h->scsi_host);
        h->scsi_host = NULL;
clean2_5: /* pci, lu, aer/h */
        hpsa_free_pci_init(h);
clean2: /* lu, aer/h */
        if (h->lockup_detected) {
                free_percpu(h->lockup_detected);
                h->lockup_detected = NULL;
        }
clean1: /* wq/aer/h */
        if (h->resubmit_wq) {
                destroy_workqueue(h->resubmit_wq);
                h->resubmit_wq = NULL;
        }
        if (h->rescan_ctlr_wq) {
                destroy_workqueue(h->rescan_ctlr_wq);
                h->rescan_ctlr_wq = NULL;
        }
        if (h->monitor_ctlr_wq) {
                destroy_workqueue(h->monitor_ctlr_wq);
                h->monitor_ctlr_wq = NULL;
        }
        hpda_free_ctlr_info(h);
        return rc;
}

static void hpsa_flush_cache(struct ctlr_info *h)
{
        char *flush_buf;
        struct CommandList *c;
        int rc;

        if (unlikely(lockup_detected(h)))
                return;
        flush_buf = kzalloc(4, GFP_KERNEL);
        if (!flush_buf)
                return;

        c = cmd_alloc(h);

        if (fill_cmd(c, HPSA_CACHE_FLUSH, h, flush_buf, 4, 0,
                RAID_CTLR_LUNID, TYPE_CMD)) {
                goto out;
        }
        rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_TO_DEVICE,
                        DEFAULT_TIMEOUT);
        if (rc)
                goto out;
        if (c->err_info->CommandStatus != 0)
out:
                dev_warn(&h->pdev->dev,
                        "error flushing cache on controller\n");
        cmd_free(h, c);
        kfree(flush_buf);
}

/* Make controller gather fresh report lun data each time we
 * send down a report luns request
 */
static void hpsa_disable_rld_caching(struct ctlr_info *h)
{
        u32 *options;
        struct CommandList *c;
        int rc;

        /* Don't bother trying to set diag options if locked up */
        if (unlikely(h->lockup_detected))
                return;

        options = kzalloc_obj(*options);
        if (!options)
                return;

        c = cmd_alloc(h);

        /* first, get the current diag options settings */
        if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0,
                RAID_CTLR_LUNID, TYPE_CMD))
                goto errout;

        rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
                        NO_TIMEOUT);
        if ((rc != 0) || (c->err_info->CommandStatus != 0))
                goto errout;

        /* Now, set the bit for disabling the RLD caching */
        *options |= HPSA_DIAG_OPTS_DISABLE_RLD_CACHING;

        if (fill_cmd(c, BMIC_SET_DIAG_OPTIONS, h, options, 4, 0,
                RAID_CTLR_LUNID, TYPE_CMD))
                goto errout;

        rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_TO_DEVICE,
                        NO_TIMEOUT);
        if ((rc != 0)  || (c->err_info->CommandStatus != 0))
                goto errout;

        /* Now verify that it got set: */
        if (fill_cmd(c, BMIC_SENSE_DIAG_OPTIONS, h, options, 4, 0,
                RAID_CTLR_LUNID, TYPE_CMD))
                goto errout;

        rc = hpsa_scsi_do_simple_cmd_with_retry(h, c, DMA_FROM_DEVICE,
                        NO_TIMEOUT);
        if ((rc != 0)  || (c->err_info->CommandStatus != 0))
                goto errout;

        if (*options & HPSA_DIAG_OPTS_DISABLE_RLD_CACHING)
                goto out;

errout:
        dev_err(&h->pdev->dev,
                        "Error: failed to disable report lun data caching.\n");
out:
        cmd_free(h, c);
        kfree(options);
}

static void __hpsa_shutdown(struct pci_dev *pdev)
{
        struct ctlr_info *h;

        h = pci_get_drvdata(pdev);
        /* Turn board interrupts off  and send the flush cache command
         * sendcmd will turn off interrupt, and send the flush...
         * To write all data in the battery backed cache to disks
         */
        hpsa_flush_cache(h);
        h->access.set_intr_mask(h, HPSA_INTR_OFF);
        hpsa_free_irqs(h);                      /* init_one 4 */
        hpsa_disable_interrupt_mode(h);         /* pci_init 2 */
}

static void hpsa_shutdown(struct pci_dev *pdev)
{
        __hpsa_shutdown(pdev);
        pci_disable_device(pdev);
}

static void hpsa_free_device_info(struct ctlr_info *h)
{
        int i;

        for (i = 0; i < h->ndevices; i++) {
                kfree(h->dev[i]);
                h->dev[i] = NULL;
        }
}

static void hpsa_remove_one(struct pci_dev *pdev)
{
        struct ctlr_info *h;
        unsigned long flags;

        if (pci_get_drvdata(pdev) == NULL) {
                dev_err(&pdev->dev, "unable to remove device\n");
                return;
        }
        h = pci_get_drvdata(pdev);

        /* Get rid of any controller monitoring work items */
        spin_lock_irqsave(&h->lock, flags);
        h->remove_in_progress = 1;
        spin_unlock_irqrestore(&h->lock, flags);
        cancel_delayed_work_sync(&h->monitor_ctlr_work);
        cancel_delayed_work_sync(&h->rescan_ctlr_work);
        cancel_delayed_work_sync(&h->event_monitor_work);
        destroy_workqueue(h->rescan_ctlr_wq);
        destroy_workqueue(h->resubmit_wq);
        destroy_workqueue(h->monitor_ctlr_wq);

        hpsa_delete_sas_host(h);

        /*
         * Call before disabling interrupts.
         * scsi_remove_host can trigger I/O operations especially
         * when multipath is enabled. There can be SYNCHRONIZE CACHE
         * operations which cannot complete and will hang the system.
         */
        if (h->scsi_host)
                scsi_remove_host(h->scsi_host);         /* init_one 8 */
        /* includes hpsa_free_irqs - init_one 4 */
        /* includes hpsa_disable_interrupt_mode - pci_init 2 */
        __hpsa_shutdown(pdev);

        hpsa_free_device_info(h);               /* scan */

        kfree(h->hba_inquiry_data);                     /* init_one 10 */
        h->hba_inquiry_data = NULL;                     /* init_one 10 */
        hpsa_free_ioaccel2_sg_chain_blocks(h);
        hpsa_free_performant_mode(h);                   /* init_one 7 */
        hpsa_free_sg_chain_blocks(h);                   /* init_one 6 */
        hpsa_free_cmd_pool(h);                          /* init_one 5 */
        kfree(h->lastlogicals);

        /* hpsa_free_irqs already called via hpsa_shutdown init_one 4 */

        scsi_host_put(h->scsi_host);                    /* init_one 3 */
        h->scsi_host = NULL;                            /* init_one 3 */

        /* includes hpsa_disable_interrupt_mode - pci_init 2 */
        hpsa_free_pci_init(h);                          /* init_one 2.5 */

        free_percpu(h->lockup_detected);                /* init_one 2 */
        h->lockup_detected = NULL;                      /* init_one 2 */

        hpda_free_ctlr_info(h);                         /* init_one 1 */
}

static int __maybe_unused hpsa_suspend(
        __attribute__((unused)) struct device *dev)
{
        return -ENOSYS;
}

static int __maybe_unused hpsa_resume
        (__attribute__((unused)) struct device *dev)
{
        return -ENOSYS;
}

static SIMPLE_DEV_PM_OPS(hpsa_pm_ops, hpsa_suspend, hpsa_resume);

static struct pci_driver hpsa_pci_driver = {
        .name = HPSA,
        .probe = hpsa_init_one,
        .remove = hpsa_remove_one,
        .id_table = hpsa_pci_device_id, /* id_table */
        .shutdown = hpsa_shutdown,
        .driver.pm = &hpsa_pm_ops,
};

/* Fill in bucket_map[], given nsgs (the max number of
 * scatter gather elements supported) and bucket[],
 * which is an array of 8 integers.  The bucket[] array
 * contains 8 different DMA transfer sizes (in 16
 * byte increments) which the controller uses to fetch
 * commands.  This function fills in bucket_map[], which
 * maps a given number of scatter gather elements to one of
 * the 8 DMA transfer sizes.  The point of it is to allow the
 * controller to only do as much DMA as needed to fetch the
 * command, with the DMA transfer size encoded in the lower
 * bits of the command address.
 */
static void  calc_bucket_map(int bucket[], int num_buckets,
        int nsgs, int min_blocks, u32 *bucket_map)
{
        int i, j, b, size;

        /* Note, bucket_map must have nsgs+1 entries. */
        for (i = 0; i <= nsgs; i++) {
                /* Compute size of a command with i SG entries */
                size = i + min_blocks;
                b = num_buckets; /* Assume the biggest bucket */
                /* Find the bucket that is just big enough */
                for (j = 0; j < num_buckets; j++) {
                        if (bucket[j] >= size) {
                                b = j;
                                break;
                        }
                }
                /* for a command with i SG entries, use bucket b. */
                bucket_map[i] = b;
        }
}

/*
 * return -ENODEV on err, 0 on success (or no action)
 * allocates numerous items that must be freed later
 */
static int hpsa_enter_performant_mode(struct ctlr_info *h, u32 trans_support)
{
        int i;
        unsigned long register_value;
        unsigned long transMethod = CFGTBL_Trans_Performant |
                        (trans_support & CFGTBL_Trans_use_short_tags) |
                                CFGTBL_Trans_enable_directed_msix |
                        (trans_support & (CFGTBL_Trans_io_accel1 |
                                CFGTBL_Trans_io_accel2));
        struct access_method access = SA5_performant_access;

        /* This is a bit complicated.  There are 8 registers on
         * the controller which we write to to tell it 8 different
         * sizes of commands which there may be.  It's a way of
         * reducing the DMA done to fetch each command.  Encoded into
         * each command's tag are 3 bits which communicate to the controller
         * which of the eight sizes that command fits within.  The size of
         * each command depends on how many scatter gather entries there are.
         * Each SG entry requires 16 bytes.  The eight registers are programmed
         * with the number of 16-byte blocks a command of that size requires.
         * The smallest command possible requires 5 such 16 byte blocks.
         * the largest command possible requires SG_ENTRIES_IN_CMD + 4 16-byte
         * blocks.  Note, this only extends to the SG entries contained
         * within the command block, and does not extend to chained blocks
         * of SG elements.   bft[] contains the eight values we write to
         * the registers.  They are not evenly distributed, but have more
         * sizes for small commands, and fewer sizes for larger commands.
         */
        int bft[8] = {5, 6, 8, 10, 12, 20, 28, SG_ENTRIES_IN_CMD + 4};
#define MIN_IOACCEL2_BFT_ENTRY 5
#define HPSA_IOACCEL2_HEADER_SZ 4
        int bft2[16] = {MIN_IOACCEL2_BFT_ENTRY, 6, 7, 8, 9, 10, 11, 12,
                        13, 14, 15, 16, 17, 18, 19,
                        HPSA_IOACCEL2_HEADER_SZ + IOACCEL2_MAXSGENTRIES};
        BUILD_BUG_ON(ARRAY_SIZE(bft2) != 16);
        BUILD_BUG_ON(ARRAY_SIZE(bft) != 8);
        BUILD_BUG_ON(offsetof(struct io_accel2_cmd, sg) >
                                 16 * MIN_IOACCEL2_BFT_ENTRY);
        BUILD_BUG_ON(sizeof(struct ioaccel2_sg_element) != 16);
        BUILD_BUG_ON(28 > SG_ENTRIES_IN_CMD + 4);
        /*  5 = 1 s/g entry or 4k
         *  6 = 2 s/g entry or 8k
         *  8 = 4 s/g entry or 16k
         * 10 = 6 s/g entry or 24k
         */

        /* If the controller supports either ioaccel method then
         * we can also use the RAID stack submit path that does not
         * perform the superfluous readl() after each command submission.
         */
        if (trans_support & (CFGTBL_Trans_io_accel1 | CFGTBL_Trans_io_accel2))
                access = SA5_performant_access_no_read;

        /* Controller spec: zero out this buffer. */
        for (i = 0; i < h->nreply_queues; i++)
                memset(h->reply_queue[i].head, 0, h->reply_queue_size);

        bft[7] = SG_ENTRIES_IN_CMD + 4;
        calc_bucket_map(bft, ARRAY_SIZE(bft),
                                SG_ENTRIES_IN_CMD, 4, h->blockFetchTable);
        for (i = 0; i < 8; i++)
                writel(bft[i], &h->transtable->BlockFetch[i]);

        /* size of controller ring buffer */
        writel(h->max_commands, &h->transtable->RepQSize);
        writel(h->nreply_queues, &h->transtable->RepQCount);
        writel(0, &h->transtable->RepQCtrAddrLow32);
        writel(0, &h->transtable->RepQCtrAddrHigh32);

        for (i = 0; i < h->nreply_queues; i++) {
                writel(0, &h->transtable->RepQAddr[i].upper);
                writel(h->reply_queue[i].busaddr,
                        &h->transtable->RepQAddr[i].lower);
        }

        writel(0, &h->cfgtable->HostWrite.command_pool_addr_hi);
        writel(transMethod, &(h->cfgtable->HostWrite.TransportRequest));
        /*
         * enable outbound interrupt coalescing in accelerator mode;
         */
        if (trans_support & CFGTBL_Trans_io_accel1) {
                access = SA5_ioaccel_mode1_access;
                writel(10, &h->cfgtable->HostWrite.CoalIntDelay);
                writel(4, &h->cfgtable->HostWrite.CoalIntCount);
        } else
                if (trans_support & CFGTBL_Trans_io_accel2)
                        access = SA5_ioaccel_mode2_access;
        writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
        if (hpsa_wait_for_mode_change_ack(h)) {
                dev_err(&h->pdev->dev,
                        "performant mode problem - doorbell timeout\n");
                return -ENODEV;
        }
        register_value = readl(&(h->cfgtable->TransportActive));
        if (!(register_value & CFGTBL_Trans_Performant)) {
                dev_err(&h->pdev->dev,
                        "performant mode problem - transport not active\n");
                return -ENODEV;
        }
        /* Change the access methods to the performant access methods */
        h->access = access;
        h->transMethod = transMethod;

        if (!((trans_support & CFGTBL_Trans_io_accel1) ||
                (trans_support & CFGTBL_Trans_io_accel2)))
                return 0;

        if (trans_support & CFGTBL_Trans_io_accel1) {
                /* Set up I/O accelerator mode */
                for (i = 0; i < h->nreply_queues; i++) {
                        writel(i, h->vaddr + IOACCEL_MODE1_REPLY_QUEUE_INDEX);
                        h->reply_queue[i].current_entry =
                                readl(h->vaddr + IOACCEL_MODE1_PRODUCER_INDEX);
                }
                bft[7] = h->ioaccel_maxsg + 8;
                calc_bucket_map(bft, ARRAY_SIZE(bft), h->ioaccel_maxsg, 8,
                                h->ioaccel1_blockFetchTable);

                /* initialize all reply queue entries to unused */
                for (i = 0; i < h->nreply_queues; i++)
                        memset(h->reply_queue[i].head,
                                (u8) IOACCEL_MODE1_REPLY_UNUSED,
                                h->reply_queue_size);

                /* set all the constant fields in the accelerator command
                 * frames once at init time to save CPU cycles later.
                 */
                for (i = 0; i < h->nr_cmds; i++) {
                        struct io_accel1_cmd *cp = &h->ioaccel_cmd_pool[i];

                        cp->function = IOACCEL1_FUNCTION_SCSIIO;
                        cp->err_info = (u32) (h->errinfo_pool_dhandle +
                                        (i * sizeof(struct ErrorInfo)));
                        cp->err_info_len = sizeof(struct ErrorInfo);
                        cp->sgl_offset = IOACCEL1_SGLOFFSET;
                        cp->host_context_flags =
                                cpu_to_le16(IOACCEL1_HCFLAGS_CISS_FORMAT);
                        cp->timeout_sec = 0;
                        cp->ReplyQueue = 0;
                        cp->tag =
                                cpu_to_le64((i << DIRECT_LOOKUP_SHIFT));
                        cp->host_addr =
                                cpu_to_le64(h->ioaccel_cmd_pool_dhandle +
                                        (i * sizeof(struct io_accel1_cmd)));
                }
        } else if (trans_support & CFGTBL_Trans_io_accel2) {
                u64 cfg_offset, cfg_base_addr_index;
                u32 bft2_offset, cfg_base_addr;

                hpsa_find_cfg_addrs(h->pdev, h->vaddr, &cfg_base_addr,
                                    &cfg_base_addr_index, &cfg_offset);
                BUILD_BUG_ON(offsetof(struct io_accel2_cmd, sg) != 64);
                bft2[15] = h->ioaccel_maxsg + HPSA_IOACCEL2_HEADER_SZ;
                calc_bucket_map(bft2, ARRAY_SIZE(bft2), h->ioaccel_maxsg,
                                4, h->ioaccel2_blockFetchTable);
                bft2_offset = readl(&h->cfgtable->io_accel_request_size_offset);
                BUILD_BUG_ON(offsetof(struct CfgTable,
                                io_accel_request_size_offset) != 0xb8);
                h->ioaccel2_bft2_regs =
                        remap_pci_mem(pci_resource_start(h->pdev,
                                        cfg_base_addr_index) +
                                        cfg_offset + bft2_offset,
                                        ARRAY_SIZE(bft2) *
                                        sizeof(*h->ioaccel2_bft2_regs));
                for (i = 0; i < ARRAY_SIZE(bft2); i++)
                        writel(bft2[i], &h->ioaccel2_bft2_regs[i]);
        }
        writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
        if (hpsa_wait_for_mode_change_ack(h)) {
                dev_err(&h->pdev->dev,
                        "performant mode problem - enabling ioaccel mode\n");
                return -ENODEV;
        }
        return 0;
}

/* Free ioaccel1 mode command blocks and block fetch table */
static void hpsa_free_ioaccel1_cmd_and_bft(struct ctlr_info *h)
{
        if (h->ioaccel_cmd_pool) {
                dma_free_coherent(&h->pdev->dev,
                                  h->nr_cmds * sizeof(*h->ioaccel_cmd_pool),
                                  h->ioaccel_cmd_pool,
                                  h->ioaccel_cmd_pool_dhandle);
                h->ioaccel_cmd_pool = NULL;
                h->ioaccel_cmd_pool_dhandle = 0;
        }
        kfree(h->ioaccel1_blockFetchTable);
        h->ioaccel1_blockFetchTable = NULL;
}

/* Allocate ioaccel1 mode command blocks and block fetch table */
static int hpsa_alloc_ioaccel1_cmd_and_bft(struct ctlr_info *h)
{
        h->ioaccel_maxsg =
                readl(&(h->cfgtable->io_accel_max_embedded_sg_count));
        if (h->ioaccel_maxsg > IOACCEL1_MAXSGENTRIES)
                h->ioaccel_maxsg = IOACCEL1_MAXSGENTRIES;

        /* Command structures must be aligned on a 128-byte boundary
         * because the 7 lower bits of the address are used by the
         * hardware.
         */
        BUILD_BUG_ON(sizeof(struct io_accel1_cmd) %
                        IOACCEL1_COMMANDLIST_ALIGNMENT);
        h->ioaccel_cmd_pool =
                dma_alloc_coherent(&h->pdev->dev,
                        h->nr_cmds * sizeof(*h->ioaccel_cmd_pool),
                        &h->ioaccel_cmd_pool_dhandle, GFP_KERNEL);

        h->ioaccel1_blockFetchTable =
                kmalloc(((h->ioaccel_maxsg + 1) *
                                sizeof(u32)), GFP_KERNEL);

        if ((h->ioaccel_cmd_pool == NULL) ||
                (h->ioaccel1_blockFetchTable == NULL))
                goto clean_up;

        memset(h->ioaccel_cmd_pool, 0,
                h->nr_cmds * sizeof(*h->ioaccel_cmd_pool));
        return 0;

clean_up:
        hpsa_free_ioaccel1_cmd_and_bft(h);
        return -ENOMEM;
}

/* Free ioaccel2 mode command blocks and block fetch table */
static void hpsa_free_ioaccel2_cmd_and_bft(struct ctlr_info *h)
{
        hpsa_free_ioaccel2_sg_chain_blocks(h);

        if (h->ioaccel2_cmd_pool) {
                dma_free_coherent(&h->pdev->dev,
                                  h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
                                  h->ioaccel2_cmd_pool,
                                  h->ioaccel2_cmd_pool_dhandle);
                h->ioaccel2_cmd_pool = NULL;
                h->ioaccel2_cmd_pool_dhandle = 0;
        }
        kfree(h->ioaccel2_blockFetchTable);
        h->ioaccel2_blockFetchTable = NULL;
}

/* Allocate ioaccel2 mode command blocks and block fetch table */
static int hpsa_alloc_ioaccel2_cmd_and_bft(struct ctlr_info *h)
{
        int rc;

        /* Allocate ioaccel2 mode command blocks and block fetch table */

        h->ioaccel_maxsg =
                readl(&(h->cfgtable->io_accel_max_embedded_sg_count));
        if (h->ioaccel_maxsg > IOACCEL2_MAXSGENTRIES)
                h->ioaccel_maxsg = IOACCEL2_MAXSGENTRIES;

        BUILD_BUG_ON(sizeof(struct io_accel2_cmd) %
                        IOACCEL2_COMMANDLIST_ALIGNMENT);
        h->ioaccel2_cmd_pool =
                dma_alloc_coherent(&h->pdev->dev,
                        h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool),
                        &h->ioaccel2_cmd_pool_dhandle, GFP_KERNEL);

        h->ioaccel2_blockFetchTable =
                kmalloc(((h->ioaccel_maxsg + 1) *
                                sizeof(u32)), GFP_KERNEL);

        if ((h->ioaccel2_cmd_pool == NULL) ||
                (h->ioaccel2_blockFetchTable == NULL)) {
                rc = -ENOMEM;
                goto clean_up;
        }

        rc = hpsa_allocate_ioaccel2_sg_chain_blocks(h);
        if (rc)
                goto clean_up;

        memset(h->ioaccel2_cmd_pool, 0,
                h->nr_cmds * sizeof(*h->ioaccel2_cmd_pool));
        return 0;

clean_up:
        hpsa_free_ioaccel2_cmd_and_bft(h);
        return rc;
}

/* Free items allocated by hpsa_put_ctlr_into_performant_mode */
static void hpsa_free_performant_mode(struct ctlr_info *h)
{
        kfree(h->blockFetchTable);
        h->blockFetchTable = NULL;
        hpsa_free_reply_queues(h);
        hpsa_free_ioaccel1_cmd_and_bft(h);
        hpsa_free_ioaccel2_cmd_and_bft(h);
}

/* return -ENODEV on error, 0 on success (or no action)
 * allocates numerous items that must be freed later
 */
static int hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
{
        u32 trans_support;
        int i, rc;

        if (hpsa_simple_mode)
                return 0;

        trans_support = readl(&(h->cfgtable->TransportSupport));
        if (!(trans_support & PERFORMANT_MODE))
                return 0;

        /* Check for I/O accelerator mode support */
        if (trans_support & CFGTBL_Trans_io_accel1) {
                rc = hpsa_alloc_ioaccel1_cmd_and_bft(h);
                if (rc)
                        return rc;
        } else if (trans_support & CFGTBL_Trans_io_accel2) {
                rc = hpsa_alloc_ioaccel2_cmd_and_bft(h);
                if (rc)
                        return rc;
        }

        h->nreply_queues = h->msix_vectors > 0 ? h->msix_vectors : 1;
        hpsa_get_max_perf_mode_cmds(h);
        /* Performant mode ring buffer and supporting data structures */
        h->reply_queue_size = h->max_commands * sizeof(u64);

        for (i = 0; i < h->nreply_queues; i++) {
                h->reply_queue[i].head = dma_alloc_coherent(&h->pdev->dev,
                                                h->reply_queue_size,
                                                &h->reply_queue[i].busaddr,
                                                GFP_KERNEL);
                if (!h->reply_queue[i].head) {
                        rc = -ENOMEM;
                        goto clean1;    /* rq, ioaccel */
                }
                h->reply_queue[i].size = h->max_commands;
                h->reply_queue[i].wraparound = 1;  /* spec: init to 1 */
                h->reply_queue[i].current_entry = 0;
        }

        /* Need a block fetch table for performant mode */
        h->blockFetchTable = kmalloc(((SG_ENTRIES_IN_CMD + 1) *
                                sizeof(u32)), GFP_KERNEL);
        if (!h->blockFetchTable) {
                rc = -ENOMEM;
                goto clean1;    /* rq, ioaccel */
        }

        rc = hpsa_enter_performant_mode(h, trans_support);
        if (rc)
                goto clean2;    /* bft, rq, ioaccel */
        return 0;

clean2: /* bft, rq, ioaccel */
        kfree(h->blockFetchTable);
        h->blockFetchTable = NULL;
clean1: /* rq, ioaccel */
        hpsa_free_reply_queues(h);
        hpsa_free_ioaccel1_cmd_and_bft(h);
        hpsa_free_ioaccel2_cmd_and_bft(h);
        return rc;
}

static int is_accelerated_cmd(struct CommandList *c)
{
        return c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_IOACCEL2;
}

static void hpsa_drain_accel_commands(struct ctlr_info *h)
{
        struct CommandList *c = NULL;
        int i, accel_cmds_out;
        int refcount;

        do { /* wait for all outstanding ioaccel commands to drain out */
                accel_cmds_out = 0;
                for (i = 0; i < h->nr_cmds; i++) {
                        c = h->cmd_pool + i;
                        refcount = atomic_inc_return(&c->refcount);
                        if (refcount > 1) /* Command is allocated */
                                accel_cmds_out += is_accelerated_cmd(c);
                        cmd_free(h, c);
                }
                if (accel_cmds_out <= 0)
                        break;
                msleep(100);
        } while (1);
}

static struct hpsa_sas_phy *hpsa_alloc_sas_phy(
                                struct hpsa_sas_port *hpsa_sas_port)
{
        struct hpsa_sas_phy *hpsa_sas_phy;
        struct sas_phy *phy;

        hpsa_sas_phy = kzalloc_obj(*hpsa_sas_phy);
        if (!hpsa_sas_phy)
                return NULL;

        phy = sas_phy_alloc(hpsa_sas_port->parent_node->parent_dev,
                hpsa_sas_port->next_phy_index);
        if (!phy) {
                kfree(hpsa_sas_phy);
                return NULL;
        }

        hpsa_sas_port->next_phy_index++;
        hpsa_sas_phy->phy = phy;
        hpsa_sas_phy->parent_port = hpsa_sas_port;

        return hpsa_sas_phy;
}

static void hpsa_free_sas_phy(struct hpsa_sas_phy *hpsa_sas_phy)
{
        struct sas_phy *phy = hpsa_sas_phy->phy;

        sas_port_delete_phy(hpsa_sas_phy->parent_port->port, phy);
        if (hpsa_sas_phy->added_to_port)
                list_del(&hpsa_sas_phy->phy_list_entry);
        sas_phy_delete(phy);
        kfree(hpsa_sas_phy);
}

static int hpsa_sas_port_add_phy(struct hpsa_sas_phy *hpsa_sas_phy)
{
        int rc;
        struct hpsa_sas_port *hpsa_sas_port;
        struct sas_phy *phy;
        struct sas_identify *identify;

        hpsa_sas_port = hpsa_sas_phy->parent_port;
        phy = hpsa_sas_phy->phy;

        identify = &phy->identify;
        memset(identify, 0, sizeof(*identify));
        identify->sas_address = hpsa_sas_port->sas_address;
        identify->device_type = SAS_END_DEVICE;
        identify->initiator_port_protocols = SAS_PROTOCOL_STP;
        identify->target_port_protocols = SAS_PROTOCOL_STP;
        phy->minimum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
        phy->maximum_linkrate_hw = SAS_LINK_RATE_UNKNOWN;
        phy->minimum_linkrate = SAS_LINK_RATE_UNKNOWN;
        phy->maximum_linkrate = SAS_LINK_RATE_UNKNOWN;
        phy->negotiated_linkrate = SAS_LINK_RATE_UNKNOWN;

        rc = sas_phy_add(hpsa_sas_phy->phy);
        if (rc)
                return rc;

        sas_port_add_phy(hpsa_sas_port->port, hpsa_sas_phy->phy);
        list_add_tail(&hpsa_sas_phy->phy_list_entry,
                        &hpsa_sas_port->phy_list_head);
        hpsa_sas_phy->added_to_port = true;

        return 0;
}

static int
        hpsa_sas_port_add_rphy(struct hpsa_sas_port *hpsa_sas_port,
                                struct sas_rphy *rphy)
{
        struct sas_identify *identify;

        identify = &rphy->identify;
        identify->sas_address = hpsa_sas_port->sas_address;
        identify->initiator_port_protocols = SAS_PROTOCOL_STP;
        identify->target_port_protocols = SAS_PROTOCOL_STP;

        return sas_rphy_add(rphy);
}

static struct hpsa_sas_port
        *hpsa_alloc_sas_port(struct hpsa_sas_node *hpsa_sas_node,
                                u64 sas_address)
{
        int rc;
        struct hpsa_sas_port *hpsa_sas_port;
        struct sas_port *port;

        hpsa_sas_port = kzalloc_obj(*hpsa_sas_port);
        if (!hpsa_sas_port)
                return NULL;

        INIT_LIST_HEAD(&hpsa_sas_port->phy_list_head);
        hpsa_sas_port->parent_node = hpsa_sas_node;

        port = sas_port_alloc_num(hpsa_sas_node->parent_dev);
        if (!port)
                goto free_hpsa_port;

        rc = sas_port_add(port);
        if (rc)
                goto free_sas_port;

        hpsa_sas_port->port = port;
        hpsa_sas_port->sas_address = sas_address;
        list_add_tail(&hpsa_sas_port->port_list_entry,
                        &hpsa_sas_node->port_list_head);

        return hpsa_sas_port;

free_sas_port:
        sas_port_free(port);
free_hpsa_port:
        kfree(hpsa_sas_port);

        return NULL;
}

static void hpsa_free_sas_port(struct hpsa_sas_port *hpsa_sas_port)
{
        struct hpsa_sas_phy *hpsa_sas_phy;
        struct hpsa_sas_phy *next;

        list_for_each_entry_safe(hpsa_sas_phy, next,
                        &hpsa_sas_port->phy_list_head, phy_list_entry)
                hpsa_free_sas_phy(hpsa_sas_phy);

        sas_port_delete(hpsa_sas_port->port);
        list_del(&hpsa_sas_port->port_list_entry);
        kfree(hpsa_sas_port);
}

static struct hpsa_sas_node *hpsa_alloc_sas_node(struct device *parent_dev)
{
        struct hpsa_sas_node *hpsa_sas_node;

        hpsa_sas_node = kzalloc_obj(*hpsa_sas_node);
        if (hpsa_sas_node) {
                hpsa_sas_node->parent_dev = parent_dev;
                INIT_LIST_HEAD(&hpsa_sas_node->port_list_head);
        }

        return hpsa_sas_node;
}

static void hpsa_free_sas_node(struct hpsa_sas_node *hpsa_sas_node)
{
        struct hpsa_sas_port *hpsa_sas_port;
        struct hpsa_sas_port *next;

        if (!hpsa_sas_node)
                return;

        list_for_each_entry_safe(hpsa_sas_port, next,
                        &hpsa_sas_node->port_list_head, port_list_entry)
                hpsa_free_sas_port(hpsa_sas_port);

        kfree(hpsa_sas_node);
}

static struct hpsa_scsi_dev_t
        *hpsa_find_device_by_sas_rphy(struct ctlr_info *h,
                                        struct sas_rphy *rphy)
{
        int i;
        struct hpsa_scsi_dev_t *device;

        for (i = 0; i < h->ndevices; i++) {
                device = h->dev[i];
                if (!device->sas_port)
                        continue;
                if (device->sas_port->rphy == rphy)
                        return device;
        }

        return NULL;
}

static int hpsa_add_sas_host(struct ctlr_info *h)
{
        int rc;
        struct device *parent_dev;
        struct hpsa_sas_node *hpsa_sas_node;
        struct hpsa_sas_port *hpsa_sas_port;
        struct hpsa_sas_phy *hpsa_sas_phy;

        parent_dev = &h->scsi_host->shost_dev;

        hpsa_sas_node = hpsa_alloc_sas_node(parent_dev);
        if (!hpsa_sas_node)
                return -ENOMEM;

        hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, h->sas_address);
        if (!hpsa_sas_port) {
                rc = -ENODEV;
                goto free_sas_node;
        }

        hpsa_sas_phy = hpsa_alloc_sas_phy(hpsa_sas_port);
        if (!hpsa_sas_phy) {
                rc = -ENODEV;
                goto free_sas_port;
        }

        rc = hpsa_sas_port_add_phy(hpsa_sas_phy);
        if (rc)
                goto free_sas_phy;

        h->sas_host = hpsa_sas_node;

        return 0;

free_sas_phy:
        sas_phy_free(hpsa_sas_phy->phy);
        kfree(hpsa_sas_phy);
free_sas_port:
        hpsa_free_sas_port(hpsa_sas_port);
free_sas_node:
        hpsa_free_sas_node(hpsa_sas_node);

        return rc;
}

static void hpsa_delete_sas_host(struct ctlr_info *h)
{
        hpsa_free_sas_node(h->sas_host);
}

static int hpsa_add_sas_device(struct hpsa_sas_node *hpsa_sas_node,
                                struct hpsa_scsi_dev_t *device)
{
        int rc;
        struct hpsa_sas_port *hpsa_sas_port;
        struct sas_rphy *rphy;

        hpsa_sas_port = hpsa_alloc_sas_port(hpsa_sas_node, device->sas_address);
        if (!hpsa_sas_port)
                return -ENOMEM;

        rphy = sas_end_device_alloc(hpsa_sas_port->port);
        if (!rphy) {
                rc = -ENODEV;
                goto free_sas_port;
        }

        hpsa_sas_port->rphy = rphy;
        device->sas_port = hpsa_sas_port;

        rc = hpsa_sas_port_add_rphy(hpsa_sas_port, rphy);
        if (rc)
                goto free_sas_rphy;

        return 0;

free_sas_rphy:
        sas_rphy_free(rphy);
free_sas_port:
        hpsa_free_sas_port(hpsa_sas_port);
        device->sas_port = NULL;

        return rc;
}

static void hpsa_remove_sas_device(struct hpsa_scsi_dev_t *device)
{
        if (device->sas_port) {
                hpsa_free_sas_port(device->sas_port);
                device->sas_port = NULL;
        }
}

static int
hpsa_sas_get_linkerrors(struct sas_phy *phy)
{
        return 0;
}

static int
hpsa_sas_get_enclosure_identifier(struct sas_rphy *rphy, u64 *identifier)
{
        struct Scsi_Host *shost = phy_to_shost(rphy);
        struct ctlr_info *h;
        struct hpsa_scsi_dev_t *sd;

        if (!shost)
                return -ENXIO;

        h = shost_to_hba(shost);

        if (!h)
                return -ENXIO;

        sd = hpsa_find_device_by_sas_rphy(h, rphy);
        if (!sd)
                return -ENXIO;

        *identifier = sd->eli;

        return 0;
}

static int
hpsa_sas_get_bay_identifier(struct sas_rphy *rphy)
{
        return -ENXIO;
}

static int
hpsa_sas_phy_reset(struct sas_phy *phy, int hard_reset)
{
        return 0;
}

static int
hpsa_sas_phy_enable(struct sas_phy *phy, int enable)
{
        return 0;
}

static int
hpsa_sas_phy_setup(struct sas_phy *phy)
{
        return 0;
}

static void
hpsa_sas_phy_release(struct sas_phy *phy)
{
}

static int
hpsa_sas_phy_speed(struct sas_phy *phy, struct sas_phy_linkrates *rates)
{
        return -EINVAL;
}

static struct sas_function_template hpsa_sas_transport_functions = {
        .get_linkerrors = hpsa_sas_get_linkerrors,
        .get_enclosure_identifier = hpsa_sas_get_enclosure_identifier,
        .get_bay_identifier = hpsa_sas_get_bay_identifier,
        .phy_reset = hpsa_sas_phy_reset,
        .phy_enable = hpsa_sas_phy_enable,
        .phy_setup = hpsa_sas_phy_setup,
        .phy_release = hpsa_sas_phy_release,
        .set_phy_speed = hpsa_sas_phy_speed,
};

/*
 *  This is it.  Register the PCI driver information for the cards we control
 *  the OS will call our registered routines when it finds one of our cards.
 */
static int __init hpsa_init(void)
{
        int rc;

        hpsa_sas_transport_template =
                sas_attach_transport(&hpsa_sas_transport_functions);
        if (!hpsa_sas_transport_template)
                return -ENODEV;

        rc = pci_register_driver(&hpsa_pci_driver);

        if (rc)
                sas_release_transport(hpsa_sas_transport_template);

        return rc;
}

static void __exit hpsa_cleanup(void)
{
        pci_unregister_driver(&hpsa_pci_driver);
        sas_release_transport(hpsa_sas_transport_template);
}

static void __attribute__((unused)) verify_offsets(void)
{
#define VERIFY_OFFSET(member, offset) \
        BUILD_BUG_ON(offsetof(struct raid_map_data, member) != offset)

        VERIFY_OFFSET(structure_size, 0);
        VERIFY_OFFSET(volume_blk_size, 4);
        VERIFY_OFFSET(volume_blk_cnt, 8);
        VERIFY_OFFSET(phys_blk_shift, 16);
        VERIFY_OFFSET(parity_rotation_shift, 17);
        VERIFY_OFFSET(strip_size, 18);
        VERIFY_OFFSET(disk_starting_blk, 20);
        VERIFY_OFFSET(disk_blk_cnt, 28);
        VERIFY_OFFSET(data_disks_per_row, 36);
        VERIFY_OFFSET(metadata_disks_per_row, 38);
        VERIFY_OFFSET(row_cnt, 40);
        VERIFY_OFFSET(layout_map_count, 42);
        VERIFY_OFFSET(flags, 44);
        VERIFY_OFFSET(dekindex, 46);
        /* VERIFY_OFFSET(reserved, 48 */
        VERIFY_OFFSET(data, 64);

#undef VERIFY_OFFSET

#define VERIFY_OFFSET(member, offset) \
        BUILD_BUG_ON(offsetof(struct io_accel2_cmd, member) != offset)

        VERIFY_OFFSET(IU_type, 0);
        VERIFY_OFFSET(direction, 1);
        VERIFY_OFFSET(reply_queue, 2);
        /* VERIFY_OFFSET(reserved1, 3);  */
        VERIFY_OFFSET(scsi_nexus, 4);
        VERIFY_OFFSET(Tag, 8);
        VERIFY_OFFSET(cdb, 16);
        VERIFY_OFFSET(cciss_lun, 32);
        VERIFY_OFFSET(data_len, 40);
        VERIFY_OFFSET(cmd_priority_task_attr, 44);
        VERIFY_OFFSET(sg_count, 45);
        /* VERIFY_OFFSET(reserved3 */
        VERIFY_OFFSET(err_ptr, 48);
        VERIFY_OFFSET(err_len, 56);
        /* VERIFY_OFFSET(reserved4  */
        VERIFY_OFFSET(sg, 64);

#undef VERIFY_OFFSET

#define VERIFY_OFFSET(member, offset) \
        BUILD_BUG_ON(offsetof(struct io_accel1_cmd, member) != offset)

        VERIFY_OFFSET(dev_handle, 0x00);
        VERIFY_OFFSET(reserved1, 0x02);
        VERIFY_OFFSET(function, 0x03);
        VERIFY_OFFSET(reserved2, 0x04);
        VERIFY_OFFSET(err_info, 0x0C);
        VERIFY_OFFSET(reserved3, 0x10);
        VERIFY_OFFSET(err_info_len, 0x12);
        VERIFY_OFFSET(reserved4, 0x13);
        VERIFY_OFFSET(sgl_offset, 0x14);
        VERIFY_OFFSET(reserved5, 0x15);
        VERIFY_OFFSET(transfer_len, 0x1C);
        VERIFY_OFFSET(reserved6, 0x20);
        VERIFY_OFFSET(io_flags, 0x24);
        VERIFY_OFFSET(reserved7, 0x26);
        VERIFY_OFFSET(LUN, 0x34);
        VERIFY_OFFSET(control, 0x3C);
        VERIFY_OFFSET(CDB, 0x40);
        VERIFY_OFFSET(reserved8, 0x50);
        VERIFY_OFFSET(host_context_flags, 0x60);
        VERIFY_OFFSET(timeout_sec, 0x62);
        VERIFY_OFFSET(ReplyQueue, 0x64);
        VERIFY_OFFSET(reserved9, 0x65);
        VERIFY_OFFSET(tag, 0x68);
        VERIFY_OFFSET(host_addr, 0x70);
        VERIFY_OFFSET(CISS_LUN, 0x78);
        VERIFY_OFFSET(SG, 0x78 + 8);
#undef VERIFY_OFFSET
}

module_init(hpsa_init);
module_exit(hpsa_cleanup);