// SPDX-License-Identifier: GPL-2.0-only
/*
 *  linux/fs/buffer.c
 *
 *  Copyright (C) 1991, 1992, 2002  Linus Torvalds
 */

/*
 * Start bdflush() with kernel_thread not syscall - Paul Gortmaker, 12/95
 *
 * Removed a lot of unnecessary code and simplified things now that
 * the buffer cache isn't our primary cache - Andrew Tridgell 12/96
 *
 * Speed up hash, lru, and free list operations.  Use gfp() for allocating
 * hash table, use SLAB cache for buffer heads. SMP threading.  -DaveM
 *
 * Added 32k buffer block sizes - these are required older ARM systems. - RMK
 *
 * async buffer flushing, 1999 Andrea Arcangeli <andrea@suse.de>
 */

#include <linux/kernel.h>
#include <linux/sched/signal.h>
#include <linux/syscalls.h>
#include <linux/fs.h>
#include <linux/iomap.h>
#include <linux/mm.h>
#include <linux/percpu.h>
#include <linux/slab.h>
#include <linux/capability.h>
#include <linux/blkdev.h>
#include <linux/blk-crypto.h>
#include <linux/file.h>
#include <linux/quotaops.h>
#include <linux/highmem.h>
#include <linux/export.h>
#include <linux/backing-dev.h>
#include <linux/writeback.h>
#include <linux/hash.h>
#include <linux/suspend.h>
#include <linux/buffer_head.h>
#include <linux/task_io_accounting_ops.h>
#include <linux/bio.h>
#include <linux/cpu.h>
#include <linux/bitops.h>
#include <linux/mpage.h>
#include <linux/bit_spinlock.h>
#include <linux/pagevec.h>
#include <linux/sched/mm.h>
#include <trace/events/block.h>
#include <linux/fscrypt.h>
#include <linux/fsverity.h>
#include <linux/sched/isolation.h>

#include "internal.h"

static int fsync_buffers_list(spinlock_t *lock, struct list_head *list);
static void submit_bh_wbc(blk_opf_t opf, struct buffer_head *bh,
                          enum rw_hint hint, struct writeback_control *wbc);

#define BH_ENTRY(list) list_entry((list), struct buffer_head, b_assoc_buffers)

inline void touch_buffer(struct buffer_head *bh)
{
        trace_block_touch_buffer(bh);
        folio_mark_accessed(bh->b_folio);
}
EXPORT_SYMBOL(touch_buffer);

void __lock_buffer(struct buffer_head *bh)
{
        wait_on_bit_lock_io(&bh->b_state, BH_Lock, TASK_UNINTERRUPTIBLE);
}
EXPORT_SYMBOL(__lock_buffer);

void unlock_buffer(struct buffer_head *bh)
{
        clear_bit_unlock(BH_Lock, &bh->b_state);
        smp_mb__after_atomic();
        wake_up_bit(&bh->b_state, BH_Lock);
}
EXPORT_SYMBOL(unlock_buffer);

/*
 * Returns if the folio has dirty or writeback buffers. If all the buffers
 * are unlocked and clean then the folio_test_dirty information is stale. If
 * any of the buffers are locked, it is assumed they are locked for IO.
 */
void buffer_check_dirty_writeback(struct folio *folio,
                                     bool *dirty, bool *writeback)
{
        struct buffer_head *head, *bh;
        *dirty = false;
        *writeback = false;

        BUG_ON(!folio_test_locked(folio));

        head = folio_buffers(folio);
        if (!head)
                return;

        if (folio_test_writeback(folio))
                *writeback = true;

        bh = head;
        do {
                if (buffer_locked(bh))
                        *writeback = true;

                if (buffer_dirty(bh))
                        *dirty = true;

                bh = bh->b_this_page;
        } while (bh != head);
}

/*
 * Block until a buffer comes unlocked.  This doesn't stop it
 * from becoming locked again - you have to lock it yourself
 * if you want to preserve its state.
 */
void __wait_on_buffer(struct buffer_head * bh)
{
        wait_on_bit_io(&bh->b_state, BH_Lock, TASK_UNINTERRUPTIBLE);
}
EXPORT_SYMBOL(__wait_on_buffer);

static void buffer_io_error(struct buffer_head *bh, char *msg)
{
        if (!test_bit(BH_Quiet, &bh->b_state))
                printk_ratelimited(KERN_ERR
                        "Buffer I/O error on dev %pg, logical block %llu%s\n",
                        bh->b_bdev, (unsigned long long)bh->b_blocknr, msg);
}

/*
 * End-of-IO handler helper function which does not touch the bh after
 * unlocking it.
 * Note: unlock_buffer() sort-of does touch the bh after unlocking it, but
 * a race there is benign: unlock_buffer() only use the bh's address for
 * hashing after unlocking the buffer, so it doesn't actually touch the bh
 * itself.
 */
static void __end_buffer_read_notouch(struct buffer_head *bh, int uptodate)
{
        if (uptodate) {
                set_buffer_uptodate(bh);
        } else {
                /* This happens, due to failed read-ahead attempts. */
                clear_buffer_uptodate(bh);
        }
        unlock_buffer(bh);
}

/*
 * Default synchronous end-of-IO handler..  Just mark it up-to-date and
 * unlock the buffer.
 */
void end_buffer_read_sync(struct buffer_head *bh, int uptodate)
{
        put_bh(bh);
        __end_buffer_read_notouch(bh, uptodate);
}
EXPORT_SYMBOL(end_buffer_read_sync);

void end_buffer_write_sync(struct buffer_head *bh, int uptodate)
{
        if (uptodate) {
                set_buffer_uptodate(bh);
        } else {
                buffer_io_error(bh, ", lost sync page write");
                mark_buffer_write_io_error(bh);
                clear_buffer_uptodate(bh);
        }
        unlock_buffer(bh);
        put_bh(bh);
}
EXPORT_SYMBOL(end_buffer_write_sync);

static struct buffer_head *
__find_get_block_slow(struct block_device *bdev, sector_t block, bool atomic)
{
        struct address_space *bd_mapping = bdev->bd_mapping;
        const int blkbits = bd_mapping->host->i_blkbits;
        struct buffer_head *ret = NULL;
        pgoff_t index;
        struct buffer_head *bh;
        struct buffer_head *head;
        struct folio *folio;
        int all_mapped = 1;
        static DEFINE_RATELIMIT_STATE(last_warned, HZ, 1);

        index = ((loff_t)block << blkbits) / PAGE_SIZE;
        folio = __filemap_get_folio(bd_mapping, index, FGP_ACCESSED, 0);
        if (IS_ERR(folio))
                goto out;

        /*
         * Folio lock protects the buffers. Callers that cannot block
         * will fallback to serializing vs try_to_free_buffers() via
         * the i_private_lock.
         */
        if (atomic)
                spin_lock(&bd_mapping->i_private_lock);
        else
                folio_lock(folio);

        head = folio_buffers(folio);
        if (!head)
                goto out_unlock;
        /*
         * Upon a noref migration, the folio lock serializes here;
         * otherwise bail.
         */
        if (test_bit_acquire(BH_Migrate, &head->b_state)) {
                WARN_ON(!atomic);
                goto out_unlock;
        }

        bh = head;
        do {
                if (!buffer_mapped(bh))
                        all_mapped = 0;
                else if (bh->b_blocknr == block) {
                        ret = bh;
                        get_bh(bh);
                        goto out_unlock;
                }
                bh = bh->b_this_page;
        } while (bh != head);

        /* we might be here because some of the buffers on this page are
         * not mapped.  This is due to various races between
         * file io on the block device and getblk.  It gets dealt with
         * elsewhere, don't buffer_error if we had some unmapped buffers
         */
        ratelimit_set_flags(&last_warned, RATELIMIT_MSG_ON_RELEASE);
        if (all_mapped && __ratelimit(&last_warned)) {
                printk("__find_get_block_slow() failed. block=%llu, "
                       "b_blocknr=%llu, b_state=0x%08lx, b_size=%zu, "
                       "device %pg blocksize: %d\n",
                       (unsigned long long)block,
                       (unsigned long long)bh->b_blocknr,
                       bh->b_state, bh->b_size, bdev,
                       1 << blkbits);
        }
out_unlock:
        if (atomic)
                spin_unlock(&bd_mapping->i_private_lock);
        else
                folio_unlock(folio);
        folio_put(folio);
out:
        return ret;
}

static void end_buffer_async_read(struct buffer_head *bh, int uptodate)
{
        unsigned long flags;
        struct buffer_head *first;
        struct buffer_head *tmp;
        struct folio *folio;
        int folio_uptodate = 1;

        BUG_ON(!buffer_async_read(bh));

        folio = bh->b_folio;
        if (uptodate) {
                set_buffer_uptodate(bh);
        } else {
                clear_buffer_uptodate(bh);
                buffer_io_error(bh, ", async page read");
        }

        /*
         * Be _very_ careful from here on. Bad things can happen if
         * two buffer heads end IO at almost the same time and both
         * decide that the page is now completely done.
         */
        first = folio_buffers(folio);
        spin_lock_irqsave(&first->b_uptodate_lock, flags);
        clear_buffer_async_read(bh);
        unlock_buffer(bh);
        tmp = bh;
        do {
                if (!buffer_uptodate(tmp))
                        folio_uptodate = 0;
                if (buffer_async_read(tmp)) {
                        BUG_ON(!buffer_locked(tmp));
                        goto still_busy;
                }
                tmp = tmp->b_this_page;
        } while (tmp != bh);
        spin_unlock_irqrestore(&first->b_uptodate_lock, flags);

        folio_end_read(folio, folio_uptodate);
        return;

still_busy:
        spin_unlock_irqrestore(&first->b_uptodate_lock, flags);
}

struct postprocess_bh_ctx {
        struct work_struct work;
        struct buffer_head *bh;
        struct fsverity_info *vi;
};

static void verify_bh(struct work_struct *work)
{
        struct postprocess_bh_ctx *ctx =
                container_of(work, struct postprocess_bh_ctx, work);
        struct buffer_head *bh = ctx->bh;
        bool valid;

        valid = fsverity_verify_blocks(ctx->vi, bh->b_folio, bh->b_size,
                                       bh_offset(bh));
        end_buffer_async_read(bh, valid);
        kfree(ctx);
}

static void decrypt_bh(struct work_struct *work)
{
        struct postprocess_bh_ctx *ctx =
                container_of(work, struct postprocess_bh_ctx, work);
        struct buffer_head *bh = ctx->bh;
        int err;

        err = fscrypt_decrypt_pagecache_blocks(bh->b_folio, bh->b_size,
                                               bh_offset(bh));
        if (err == 0 && ctx->vi) {
                /*
                 * We use different work queues for decryption and for verity
                 * because verity may require reading metadata pages that need
                 * decryption, and we shouldn't recurse to the same workqueue.
                 */
                INIT_WORK(&ctx->work, verify_bh);
                fsverity_enqueue_verify_work(&ctx->work);
                return;
        }
        end_buffer_async_read(bh, err == 0);
        kfree(ctx);
}

/*
 * I/O completion handler for block_read_full_folio() - pages
 * which come unlocked at the end of I/O.
 */
static void end_buffer_async_read_io(struct buffer_head *bh, int uptodate)
{
        struct inode *inode = bh->b_folio->mapping->host;
        bool decrypt = fscrypt_inode_uses_fs_layer_crypto(inode);
        struct fsverity_info *vi = NULL;

        /* needed by ext4 */
        if (bh->b_folio->index < DIV_ROUND_UP(inode->i_size, PAGE_SIZE))
                vi = fsverity_get_info(inode);

        /* Decrypt (with fscrypt) and/or verify (with fsverity) if needed. */
        if (uptodate && (decrypt || vi)) {
                struct postprocess_bh_ctx *ctx = kmalloc_obj(*ctx, GFP_ATOMIC);

                if (ctx) {
                        ctx->bh = bh;
                        ctx->vi = vi;
                        if (decrypt) {
                                INIT_WORK(&ctx->work, decrypt_bh);
                                fscrypt_enqueue_decrypt_work(&ctx->work);
                        } else {
                                INIT_WORK(&ctx->work, verify_bh);
                                fsverity_enqueue_verify_work(&ctx->work);
                        }
                        return;
                }
                uptodate = 0;
        }
        end_buffer_async_read(bh, uptodate);
}

/*
 * Completion handler for block_write_full_folio() - folios which are unlocked
 * during I/O, and which have the writeback flag cleared upon I/O completion.
 */
static void end_buffer_async_write(struct buffer_head *bh, int uptodate)
{
        unsigned long flags;
        struct buffer_head *first;
        struct buffer_head *tmp;
        struct folio *folio;

        BUG_ON(!buffer_async_write(bh));

        folio = bh->b_folio;
        if (uptodate) {
                set_buffer_uptodate(bh);
        } else {
                buffer_io_error(bh, ", lost async page write");
                mark_buffer_write_io_error(bh);
                clear_buffer_uptodate(bh);
        }

        first = folio_buffers(folio);
        spin_lock_irqsave(&first->b_uptodate_lock, flags);

        clear_buffer_async_write(bh);
        unlock_buffer(bh);
        tmp = bh->b_this_page;
        while (tmp != bh) {
                if (buffer_async_write(tmp)) {
                        BUG_ON(!buffer_locked(tmp));
                        goto still_busy;
                }
                tmp = tmp->b_this_page;
        }
        spin_unlock_irqrestore(&first->b_uptodate_lock, flags);
        folio_end_writeback(folio);
        return;

still_busy:
        spin_unlock_irqrestore(&first->b_uptodate_lock, flags);
}

/*
 * If a page's buffers are under async readin (end_buffer_async_read
 * completion) then there is a possibility that another thread of
 * control could lock one of the buffers after it has completed
 * but while some of the other buffers have not completed.  This
 * locked buffer would confuse end_buffer_async_read() into not unlocking
 * the page.  So the absence of BH_Async_Read tells end_buffer_async_read()
 * that this buffer is not under async I/O.
 *
 * The page comes unlocked when it has no locked buffer_async buffers
 * left.
 *
 * PageLocked prevents anyone starting new async I/O reads any of
 * the buffers.
 *
 * PageWriteback is used to prevent simultaneous writeout of the same
 * page.
 *
 * PageLocked prevents anyone from starting writeback of a page which is
 * under read I/O (PageWriteback is only ever set against a locked page).
 */
static void mark_buffer_async_read(struct buffer_head *bh)
{
        bh->b_end_io = end_buffer_async_read_io;
        set_buffer_async_read(bh);
}

static void mark_buffer_async_write_endio(struct buffer_head *bh,
                                          bh_end_io_t *handler)
{
        bh->b_end_io = handler;
        set_buffer_async_write(bh);
}

void mark_buffer_async_write(struct buffer_head *bh)
{
        mark_buffer_async_write_endio(bh, end_buffer_async_write);
}
EXPORT_SYMBOL(mark_buffer_async_write);


/*
 * fs/buffer.c contains helper functions for buffer-backed address space's
 * fsync functions.  A common requirement for buffer-based filesystems is
 * that certain data from the backing blockdev needs to be written out for
 * a successful fsync().  For example, ext2 indirect blocks need to be
 * written back and waited upon before fsync() returns.
 *
 * The functions mark_buffer_dirty_inode(), fsync_inode_buffers(),
 * inode_has_buffers() and invalidate_inode_buffers() are provided for the
 * management of a list of dependent buffers at ->i_mapping->i_private_list.
 *
 * Locking is a little subtle: try_to_free_buffers() will remove buffers
 * from their controlling inode's queue when they are being freed.  But
 * try_to_free_buffers() will be operating against the *blockdev* mapping
 * at the time, not against the S_ISREG file which depends on those buffers.
 * So the locking for i_private_list is via the i_private_lock in the address_space
 * which backs the buffers.  Which is different from the address_space 
 * against which the buffers are listed.  So for a particular address_space,
 * mapping->i_private_lock does *not* protect mapping->i_private_list!  In fact,
 * mapping->i_private_list will always be protected by the backing blockdev's
 * ->i_private_lock.
 *
 * Which introduces a requirement: all buffers on an address_space's
 * ->i_private_list must be from the same address_space: the blockdev's.
 *
 * address_spaces which do not place buffers at ->i_private_list via these
 * utility functions are free to use i_private_lock and i_private_list for
 * whatever they want.  The only requirement is that list_empty(i_private_list)
 * be true at clear_inode() time.
 *
 * FIXME: clear_inode should not call invalidate_inode_buffers().  The
 * filesystems should do that.  invalidate_inode_buffers() should just go
 * BUG_ON(!list_empty).
 *
 * FIXME: mark_buffer_dirty_inode() is a data-plane operation.  It should
 * take an address_space, not an inode.  And it should be called
 * mark_buffer_dirty_fsync() to clearly define why those buffers are being
 * queued up.
 *
 * FIXME: mark_buffer_dirty_inode() doesn't need to add the buffer to the
 * list if it is already on a list.  Because if the buffer is on a list,
 * it *must* already be on the right one.  If not, the filesystem is being
 * silly.  This will save a ton of locking.  But first we have to ensure
 * that buffers are taken *off* the old inode's list when they are freed
 * (presumably in truncate).  That requires careful auditing of all
 * filesystems (do it inside bforget()).  It could also be done by bringing
 * b_inode back.
 */

/*
 * The buffer's backing address_space's i_private_lock must be held
 */
static void __remove_assoc_queue(struct buffer_head *bh)
{
        list_del_init(&bh->b_assoc_buffers);
        WARN_ON(!bh->b_assoc_map);
        bh->b_assoc_map = NULL;
}

int inode_has_buffers(struct inode *inode)
{
        return !list_empty(&inode->i_data.i_private_list);
}

/*
 * osync is designed to support O_SYNC io.  It waits synchronously for
 * all already-submitted IO to complete, but does not queue any new
 * writes to the disk.
 *
 * To do O_SYNC writes, just queue the buffer writes with write_dirty_buffer
 * as you dirty the buffers, and then use osync_inode_buffers to wait for
 * completion.  Any other dirty buffers which are not yet queued for
 * write will not be flushed to disk by the osync.
 */
static int osync_buffers_list(spinlock_t *lock, struct list_head *list)
{
        struct buffer_head *bh;
        struct list_head *p;
        int err = 0;

        spin_lock(lock);
repeat:
        list_for_each_prev(p, list) {
                bh = BH_ENTRY(p);
                if (buffer_locked(bh)) {
                        get_bh(bh);
                        spin_unlock(lock);
                        wait_on_buffer(bh);
                        if (!buffer_uptodate(bh))
                                err = -EIO;
                        brelse(bh);
                        spin_lock(lock);
                        goto repeat;
                }
        }
        spin_unlock(lock);
        return err;
}

/**
 * sync_mapping_buffers - write out & wait upon a mapping's "associated" buffers
 * @mapping: the mapping which wants those buffers written
 *
 * Starts I/O against the buffers at mapping->i_private_list, and waits upon
 * that I/O.
 *
 * Basically, this is a convenience function for fsync().
 * @mapping is a file or directory which needs those buffers to be written for
 * a successful fsync().
 */
int sync_mapping_buffers(struct address_space *mapping)
{
        struct address_space *buffer_mapping = mapping->i_private_data;

        if (buffer_mapping == NULL || list_empty(&mapping->i_private_list))
                return 0;

        return fsync_buffers_list(&buffer_mapping->i_private_lock,
                                        &mapping->i_private_list);
}
EXPORT_SYMBOL(sync_mapping_buffers);

/**
 * generic_buffers_fsync_noflush - generic buffer fsync implementation
 * for simple filesystems with no inode lock
 *
 * @file:       file to synchronize
 * @start:      start offset in bytes
 * @end:        end offset in bytes (inclusive)
 * @datasync:   only synchronize essential metadata if true
 *
 * This is a generic implementation of the fsync method for simple
 * filesystems which track all non-inode metadata in the buffers list
 * hanging off the address_space structure.
 */
int generic_buffers_fsync_noflush(struct file *file, loff_t start, loff_t end,
                                  bool datasync)
{
        struct inode *inode = file->f_mapping->host;
        int err;
        int ret;

        err = file_write_and_wait_range(file, start, end);
        if (err)
                return err;

        ret = sync_mapping_buffers(inode->i_mapping);
        if (!(inode_state_read_once(inode) & I_DIRTY_ALL))
                goto out;
        if (datasync && !(inode_state_read_once(inode) & I_DIRTY_DATASYNC))
                goto out;

        err = sync_inode_metadata(inode, 1);
        if (ret == 0)
                ret = err;

out:
        /* check and advance again to catch errors after syncing out buffers */
        err = file_check_and_advance_wb_err(file);
        if (ret == 0)
                ret = err;
        return ret;
}
EXPORT_SYMBOL(generic_buffers_fsync_noflush);

/**
 * generic_buffers_fsync - generic buffer fsync implementation
 * for simple filesystems with no inode lock
 *
 * @file:       file to synchronize
 * @start:      start offset in bytes
 * @end:        end offset in bytes (inclusive)
 * @datasync:   only synchronize essential metadata if true
 *
 * This is a generic implementation of the fsync method for simple
 * filesystems which track all non-inode metadata in the buffers list
 * hanging off the address_space structure. This also makes sure that
 * a device cache flush operation is called at the end.
 */
int generic_buffers_fsync(struct file *file, loff_t start, loff_t end,
                          bool datasync)
{
        struct inode *inode = file->f_mapping->host;
        int ret;

        ret = generic_buffers_fsync_noflush(file, start, end, datasync);
        if (!ret)
                ret = blkdev_issue_flush(inode->i_sb->s_bdev);
        return ret;
}
EXPORT_SYMBOL(generic_buffers_fsync);

/*
 * Called when we've recently written block `bblock', and it is known that
 * `bblock' was for a buffer_boundary() buffer.  This means that the block at
 * `bblock + 1' is probably a dirty indirect block.  Hunt it down and, if it's
 * dirty, schedule it for IO.  So that indirects merge nicely with their data.
 */
void write_boundary_block(struct block_device *bdev,
                        sector_t bblock, unsigned blocksize)
{
        struct buffer_head *bh;

        bh = __find_get_block_nonatomic(bdev, bblock + 1, blocksize);
        if (bh) {
                if (buffer_dirty(bh))
                        write_dirty_buffer(bh, 0);
                put_bh(bh);
        }
}

void mark_buffer_dirty_inode(struct buffer_head *bh, struct inode *inode)
{
        struct address_space *mapping = inode->i_mapping;
        struct address_space *buffer_mapping = bh->b_folio->mapping;

        mark_buffer_dirty(bh);
        if (!mapping->i_private_data) {
                mapping->i_private_data = buffer_mapping;
        } else {
                BUG_ON(mapping->i_private_data != buffer_mapping);
        }
        if (!bh->b_assoc_map) {
                spin_lock(&buffer_mapping->i_private_lock);
                list_move_tail(&bh->b_assoc_buffers,
                                &mapping->i_private_list);
                bh->b_assoc_map = mapping;
                spin_unlock(&buffer_mapping->i_private_lock);
        }
}
EXPORT_SYMBOL(mark_buffer_dirty_inode);

/**
 * block_dirty_folio - Mark a folio as dirty.
 * @mapping: The address space containing this folio.
 * @folio: The folio to mark dirty.
 *
 * Filesystems which use buffer_heads can use this function as their
 * ->dirty_folio implementation.  Some filesystems need to do a little
 * work before calling this function.  Filesystems which do not use
 * buffer_heads should call filemap_dirty_folio() instead.
 *
 * If the folio has buffers, the uptodate buffers are set dirty, to
 * preserve dirty-state coherency between the folio and the buffers.
 * Buffers added to a dirty folio are created dirty.
 *
 * The buffers are dirtied before the folio is dirtied.  There's a small
 * race window in which writeback may see the folio cleanness but not the
 * buffer dirtiness.  That's fine.  If this code were to set the folio
 * dirty before the buffers, writeback could clear the folio dirty flag,
 * see a bunch of clean buffers and we'd end up with dirty buffers/clean
 * folio on the dirty folio list.
 *
 * We use i_private_lock to lock against try_to_free_buffers() while
 * using the folio's buffer list.  This also prevents clean buffers
 * being added to the folio after it was set dirty.
 *
 * Context: May only be called from process context.  Does not sleep.
 * Caller must ensure that @folio cannot be truncated during this call,
 * typically by holding the folio lock or having a page in the folio
 * mapped and holding the page table lock.
 *
 * Return: True if the folio was dirtied; false if it was already dirtied.
 */
bool block_dirty_folio(struct address_space *mapping, struct folio *folio)
{
        struct buffer_head *head;
        bool newly_dirty;

        spin_lock(&mapping->i_private_lock);
        head = folio_buffers(folio);
        if (head) {
                struct buffer_head *bh = head;

                do {
                        set_buffer_dirty(bh);
                        bh = bh->b_this_page;
                } while (bh != head);
        }
        /*
         * Lock out page's memcg migration to keep PageDirty
         * synchronized with per-memcg dirty page counters.
         */
        newly_dirty = !folio_test_set_dirty(folio);
        spin_unlock(&mapping->i_private_lock);

        if (newly_dirty)
                __folio_mark_dirty(folio, mapping, 1);

        if (newly_dirty)
                __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);

        return newly_dirty;
}
EXPORT_SYMBOL(block_dirty_folio);

/*
 * Write out and wait upon a list of buffers.
 *
 * We have conflicting pressures: we want to make sure that all
 * initially dirty buffers get waited on, but that any subsequently
 * dirtied buffers don't.  After all, we don't want fsync to last
 * forever if somebody is actively writing to the file.
 *
 * Do this in two main stages: first we copy dirty buffers to a
 * temporary inode list, queueing the writes as we go.  Then we clean
 * up, waiting for those writes to complete.
 * 
 * During this second stage, any subsequent updates to the file may end
 * up refiling the buffer on the original inode's dirty list again, so
 * there is a chance we will end up with a buffer queued for write but
 * not yet completed on that list.  So, as a final cleanup we go through
 * the osync code to catch these locked, dirty buffers without requeuing
 * any newly dirty buffers for write.
 */
static int fsync_buffers_list(spinlock_t *lock, struct list_head *list)
{
        struct buffer_head *bh;
        struct address_space *mapping;
        int err = 0, err2;
        struct blk_plug plug;
        LIST_HEAD(tmp);

        blk_start_plug(&plug);

        spin_lock(lock);
        while (!list_empty(list)) {
                bh = BH_ENTRY(list->next);
                mapping = bh->b_assoc_map;
                __remove_assoc_queue(bh);
                /* Avoid race with mark_buffer_dirty_inode() which does
                 * a lockless check and we rely on seeing the dirty bit */
                smp_mb();
                if (buffer_dirty(bh) || buffer_locked(bh)) {
                        list_add(&bh->b_assoc_buffers, &tmp);
                        bh->b_assoc_map = mapping;
                        if (buffer_dirty(bh)) {
                                get_bh(bh);
                                spin_unlock(lock);
                                /*
                                 * Ensure any pending I/O completes so that
                                 * write_dirty_buffer() actually writes the
                                 * current contents - it is a noop if I/O is
                                 * still in flight on potentially older
                                 * contents.
                                 */
                                write_dirty_buffer(bh, REQ_SYNC);

                                /*
                                 * Kick off IO for the previous mapping. Note
                                 * that we will not run the very last mapping,
                                 * wait_on_buffer() will do that for us
                                 * through sync_buffer().
                                 */
                                brelse(bh);
                                spin_lock(lock);
                        }
                }
        }

        spin_unlock(lock);
        blk_finish_plug(&plug);
        spin_lock(lock);

        while (!list_empty(&tmp)) {
                bh = BH_ENTRY(tmp.prev);
                get_bh(bh);
                mapping = bh->b_assoc_map;
                __remove_assoc_queue(bh);
                /* Avoid race with mark_buffer_dirty_inode() which does
                 * a lockless check and we rely on seeing the dirty bit */
                smp_mb();
                if (buffer_dirty(bh)) {
                        list_add(&bh->b_assoc_buffers,
                                 &mapping->i_private_list);
                        bh->b_assoc_map = mapping;
                }
                spin_unlock(lock);
                wait_on_buffer(bh);
                if (!buffer_uptodate(bh))
                        err = -EIO;
                brelse(bh);
                spin_lock(lock);
        }
        
        spin_unlock(lock);
        err2 = osync_buffers_list(lock, list);
        if (err)
                return err;
        else
                return err2;
}

/*
 * Invalidate any and all dirty buffers on a given inode.  We are
 * probably unmounting the fs, but that doesn't mean we have already
 * done a sync().  Just drop the buffers from the inode list.
 *
 * NOTE: we take the inode's blockdev's mapping's i_private_lock.  Which
 * assumes that all the buffers are against the blockdev.
 */
void invalidate_inode_buffers(struct inode *inode)
{
        if (inode_has_buffers(inode)) {
                struct address_space *mapping = &inode->i_data;
                struct list_head *list = &mapping->i_private_list;
                struct address_space *buffer_mapping = mapping->i_private_data;

                spin_lock(&buffer_mapping->i_private_lock);
                while (!list_empty(list))
                        __remove_assoc_queue(BH_ENTRY(list->next));
                spin_unlock(&buffer_mapping->i_private_lock);
        }
}
EXPORT_SYMBOL(invalidate_inode_buffers);

/*
 * Remove any clean buffers from the inode's buffer list.  This is called
 * when we're trying to free the inode itself.  Those buffers can pin it.
 *
 * Returns true if all buffers were removed.
 */
int remove_inode_buffers(struct inode *inode)
{
        int ret = 1;

        if (inode_has_buffers(inode)) {
                struct address_space *mapping = &inode->i_data;
                struct list_head *list = &mapping->i_private_list;
                struct address_space *buffer_mapping = mapping->i_private_data;

                spin_lock(&buffer_mapping->i_private_lock);
                while (!list_empty(list)) {
                        struct buffer_head *bh = BH_ENTRY(list->next);
                        if (buffer_dirty(bh)) {
                                ret = 0;
                                break;
                        }
                        __remove_assoc_queue(bh);
                }
                spin_unlock(&buffer_mapping->i_private_lock);
        }
        return ret;
}

/*
 * Create the appropriate buffers when given a folio for data area and
 * the size of each buffer.. Use the bh->b_this_page linked list to
 * follow the buffers created.  Return NULL if unable to create more
 * buffers.
 *
 * The retry flag is used to differentiate async IO (paging, swapping)
 * which may not fail from ordinary buffer allocations.
 */
struct buffer_head *folio_alloc_buffers(struct folio *folio, unsigned long size,
                                        gfp_t gfp)
{
        struct buffer_head *bh, *head;
        long offset;
        struct mem_cgroup *memcg, *old_memcg;

        /* The folio lock pins the memcg */
        memcg = folio_memcg(folio);
        old_memcg = set_active_memcg(memcg);

        head = NULL;
        offset = folio_size(folio);
        while ((offset -= size) >= 0) {
                bh = alloc_buffer_head(gfp);
                if (!bh)
                        goto no_grow;

                bh->b_this_page = head;
                bh->b_blocknr = -1;
                head = bh;

                bh->b_size = size;

                /* Link the buffer to its folio */
                folio_set_bh(bh, folio, offset);
        }
out:
        set_active_memcg(old_memcg);
        return head;
/*
 * In case anything failed, we just free everything we got.
 */
no_grow:
        if (head) {
                do {
                        bh = head;
                        head = head->b_this_page;
                        free_buffer_head(bh);
                } while (head);
        }

        goto out;
}
EXPORT_SYMBOL_GPL(folio_alloc_buffers);

struct buffer_head *alloc_page_buffers(struct page *page, unsigned long size)
{
        gfp_t gfp = GFP_NOFS | __GFP_ACCOUNT;

        return folio_alloc_buffers(page_folio(page), size, gfp);
}
EXPORT_SYMBOL_GPL(alloc_page_buffers);

static inline void link_dev_buffers(struct folio *folio,
                struct buffer_head *head)
{
        struct buffer_head *bh, *tail;

        bh = head;
        do {
                tail = bh;
                bh = bh->b_this_page;
        } while (bh);
        tail->b_this_page = head;
        folio_attach_private(folio, head);
}

static sector_t blkdev_max_block(struct block_device *bdev, unsigned int size)
{
        sector_t retval = ~((sector_t)0);
        loff_t sz = bdev_nr_bytes(bdev);

        if (sz) {
                unsigned int sizebits = blksize_bits(size);
                retval = (sz >> sizebits);
        }
        return retval;
}

/*
 * Initialise the state of a blockdev folio's buffers.
 */ 
static sector_t folio_init_buffers(struct folio *folio,
                struct block_device *bdev, unsigned size)
{
        struct buffer_head *head = folio_buffers(folio);
        struct buffer_head *bh = head;
        bool uptodate = folio_test_uptodate(folio);
        sector_t block = div_u64(folio_pos(folio), size);
        sector_t end_block = blkdev_max_block(bdev, size);

        do {
                if (!buffer_mapped(bh)) {
                        bh->b_end_io = NULL;
                        bh->b_private = NULL;
                        bh->b_bdev = bdev;
                        bh->b_blocknr = block;
                        if (uptodate)
                                set_buffer_uptodate(bh);
                        if (block < end_block)
                                set_buffer_mapped(bh);
                }
                block++;
                bh = bh->b_this_page;
        } while (bh != head);

        /*
         * Caller needs to validate requested block against end of device.
         */
        return end_block;
}

/*
 * Create the page-cache folio that contains the requested block.
 *
 * This is used purely for blockdev mappings.
 *
 * Returns false if we have a failure which cannot be cured by retrying
 * without sleeping.  Returns true if we succeeded, or the caller should retry.
 */
static bool grow_dev_folio(struct block_device *bdev, sector_t block,
                pgoff_t index, unsigned size, gfp_t gfp)
{
        struct address_space *mapping = bdev->bd_mapping;
        struct folio *folio;
        struct buffer_head *bh;
        sector_t end_block = 0;

        folio = __filemap_get_folio(mapping, index,
                        FGP_LOCK | FGP_ACCESSED | FGP_CREAT, gfp);
        if (IS_ERR(folio))
                return false;

        bh = folio_buffers(folio);
        if (bh) {
                if (bh->b_size == size) {
                        end_block = folio_init_buffers(folio, bdev, size);
                        goto unlock;
                }

                /*
                 * Retrying may succeed; for example the folio may finish
                 * writeback, or buffers may be cleaned.  This should not
                 * happen very often; maybe we have old buffers attached to
                 * this blockdev's page cache and we're trying to change
                 * the block size?
                 */
                if (!try_to_free_buffers(folio)) {
                        end_block = ~0ULL;
                        goto unlock;
                }
        }

        bh = folio_alloc_buffers(folio, size, gfp | __GFP_ACCOUNT);
        if (!bh)
                goto unlock;

        /*
         * Link the folio to the buffers and initialise them.  Take the
         * lock to be atomic wrt __find_get_block(), which does not
         * run under the folio lock.
         */
        spin_lock(&mapping->i_private_lock);
        link_dev_buffers(folio, bh);
        end_block = folio_init_buffers(folio, bdev, size);
        spin_unlock(&mapping->i_private_lock);
unlock:
        folio_unlock(folio);
        folio_put(folio);
        return block < end_block;
}

/*
 * Create buffers for the specified block device block's folio.  If
 * that folio was dirty, the buffers are set dirty also.  Returns false
 * if we've hit a permanent error.
 */
static bool grow_buffers(struct block_device *bdev, sector_t block,
                unsigned size, gfp_t gfp)
{
        loff_t pos;

        /*
         * Check for a block which lies outside our maximum possible
         * pagecache index.
         */
        if (check_mul_overflow(block, (sector_t)size, &pos) || pos > MAX_LFS_FILESIZE) {
                printk(KERN_ERR "%s: requested out-of-range block %llu for device %pg\n",
                        __func__, (unsigned long long)block,
                        bdev);
                return false;
        }

        /* Create a folio with the proper size buffers */
        return grow_dev_folio(bdev, block, pos / PAGE_SIZE, size, gfp);
}

static struct buffer_head *
__getblk_slow(struct block_device *bdev, sector_t block,
             unsigned size, gfp_t gfp)
{
        bool blocking = gfpflags_allow_blocking(gfp);

        if (WARN_ON_ONCE(!IS_ALIGNED(size, bdev_logical_block_size(bdev)))) {
                printk(KERN_ERR "getblk(): block size %d not aligned to logical block size %d\n",
                       size, bdev_logical_block_size(bdev));
                return NULL;
        }

        for (;;) {
                struct buffer_head *bh;

                if (!grow_buffers(bdev, block, size, gfp))
                        return NULL;

                if (blocking)
                        bh = __find_get_block_nonatomic(bdev, block, size);
                else
                        bh = __find_get_block(bdev, block, size);
                if (bh)
                        return bh;
        }
}

/*
 * The relationship between dirty buffers and dirty pages:
 *
 * Whenever a page has any dirty buffers, the page's dirty bit is set, and
 * the page is tagged dirty in the page cache.
 *
 * At all times, the dirtiness of the buffers represents the dirtiness of
 * subsections of the page.  If the page has buffers, the page dirty bit is
 * merely a hint about the true dirty state.
 *
 * When a page is set dirty in its entirety, all its buffers are marked dirty
 * (if the page has buffers).
 *
 * When a buffer is marked dirty, its page is dirtied, but the page's other
 * buffers are not.
 *
 * Also.  When blockdev buffers are explicitly read with bread(), they
 * individually become uptodate.  But their backing page remains not
 * uptodate - even if all of its buffers are uptodate.  A subsequent
 * block_read_full_folio() against that folio will discover all the uptodate
 * buffers, will set the folio uptodate and will perform no I/O.
 */

/**
 * mark_buffer_dirty - mark a buffer_head as needing writeout
 * @bh: the buffer_head to mark dirty
 *
 * mark_buffer_dirty() will set the dirty bit against the buffer, then set
 * its backing page dirty, then tag the page as dirty in the page cache
 * and then attach the address_space's inode to its superblock's dirty
 * inode list.
 *
 * mark_buffer_dirty() is atomic.  It takes bh->b_folio->mapping->i_private_lock,
 * i_pages lock and mapping->host->i_lock.
 */
void mark_buffer_dirty(struct buffer_head *bh)
{
        WARN_ON_ONCE(!buffer_uptodate(bh));

        trace_block_dirty_buffer(bh);

        /*
         * Very *carefully* optimize the it-is-already-dirty case.
         *
         * Don't let the final "is it dirty" escape to before we
         * perhaps modified the buffer.
         */
        if (buffer_dirty(bh)) {
                smp_mb();
                if (buffer_dirty(bh))
                        return;
        }

        if (!test_set_buffer_dirty(bh)) {
                struct folio *folio = bh->b_folio;
                struct address_space *mapping = NULL;

                if (!folio_test_set_dirty(folio)) {
                        mapping = folio->mapping;
                        if (mapping)
                                __folio_mark_dirty(folio, mapping, 0);
                }
                if (mapping)
                        __mark_inode_dirty(mapping->host, I_DIRTY_PAGES);
        }
}
EXPORT_SYMBOL(mark_buffer_dirty);

void mark_buffer_write_io_error(struct buffer_head *bh)
{
        set_buffer_write_io_error(bh);
        /* FIXME: do we need to set this in both places? */
        if (bh->b_folio && bh->b_folio->mapping)
                mapping_set_error(bh->b_folio->mapping, -EIO);
        if (bh->b_assoc_map)
                mapping_set_error(bh->b_assoc_map, -EIO);
}
EXPORT_SYMBOL(mark_buffer_write_io_error);

/**
 * __brelse - Release a buffer.
 * @bh: The buffer to release.
 *
 * This variant of brelse() can be called if @bh is guaranteed to not be NULL.
 */
void __brelse(struct buffer_head *bh)
{
        if (atomic_read(&bh->b_count)) {
                put_bh(bh);
                return;
        }
        WARN(1, KERN_ERR "VFS: brelse: Trying to free free buffer\n");
}
EXPORT_SYMBOL(__brelse);

/**
 * __bforget - Discard any dirty data in a buffer.
 * @bh: The buffer to forget.
 *
 * This variant of bforget() can be called if @bh is guaranteed to not
 * be NULL.
 */
void __bforget(struct buffer_head *bh)
{
        clear_buffer_dirty(bh);
        if (bh->b_assoc_map) {
                struct address_space *buffer_mapping = bh->b_folio->mapping;

                spin_lock(&buffer_mapping->i_private_lock);
                list_del_init(&bh->b_assoc_buffers);
                bh->b_assoc_map = NULL;
                spin_unlock(&buffer_mapping->i_private_lock);
        }
        __brelse(bh);
}
EXPORT_SYMBOL(__bforget);

static struct buffer_head *__bread_slow(struct buffer_head *bh)
{
        lock_buffer(bh);
        if (buffer_uptodate(bh)) {
                unlock_buffer(bh);
                return bh;
        } else {
                get_bh(bh);
                bh->b_end_io = end_buffer_read_sync;
                submit_bh(REQ_OP_READ, bh);
                wait_on_buffer(bh);
                if (buffer_uptodate(bh))
                        return bh;
        }
        brelse(bh);
        return NULL;
}

/*
 * Per-cpu buffer LRU implementation.  To reduce the cost of __find_get_block().
 * The bhs[] array is sorted - newest buffer is at bhs[0].  Buffers have their
 * refcount elevated by one when they're in an LRU.  A buffer can only appear
 * once in a particular CPU's LRU.  A single buffer can be present in multiple
 * CPU's LRUs at the same time.
 *
 * This is a transparent caching front-end to sb_bread(), sb_getblk() and
 * sb_find_get_block().
 *
 * The LRUs themselves only need locking against invalidate_bh_lrus.  We use
 * a local interrupt disable for that.
 */

#define BH_LRU_SIZE     16

struct bh_lru {
        struct buffer_head *bhs[BH_LRU_SIZE];
};

static DEFINE_PER_CPU(struct bh_lru, bh_lrus) = {{ NULL }};

#ifdef CONFIG_SMP
#define bh_lru_lock()   local_irq_disable()
#define bh_lru_unlock() local_irq_enable()
#else
#define bh_lru_lock()   preempt_disable()
#define bh_lru_unlock() preempt_enable()
#endif

static inline void check_irqs_on(void)
{
#ifdef irqs_disabled
        BUG_ON(irqs_disabled());
#endif
}

/*
 * Install a buffer_head into this cpu's LRU.  If not already in the LRU, it is
 * inserted at the front, and the buffer_head at the back if any is evicted.
 * Or, if already in the LRU it is moved to the front.
 */
static void bh_lru_install(struct buffer_head *bh)
{
        struct buffer_head *evictee = bh;
        struct bh_lru *b;
        int i;

        check_irqs_on();
        bh_lru_lock();

        /*
         * the refcount of buffer_head in bh_lru prevents dropping the
         * attached page(i.e., try_to_free_buffers) so it could cause
         * failing page migration.
         * Skip putting upcoming bh into bh_lru until migration is done.
         */
        if (lru_cache_disabled() || cpu_is_isolated(smp_processor_id())) {
                bh_lru_unlock();
                return;
        }

        b = this_cpu_ptr(&bh_lrus);
        for (i = 0; i < BH_LRU_SIZE; i++) {
                swap(evictee, b->bhs[i]);
                if (evictee == bh) {
                        bh_lru_unlock();
                        return;
                }
        }

        get_bh(bh);
        bh_lru_unlock();
        brelse(evictee);
}

/*
 * Look up the bh in this cpu's LRU.  If it's there, move it to the head.
 */
static struct buffer_head *
lookup_bh_lru(struct block_device *bdev, sector_t block, unsigned size)
{
        struct buffer_head *ret = NULL;
        unsigned int i;

        check_irqs_on();
        bh_lru_lock();
        if (cpu_is_isolated(smp_processor_id())) {
                bh_lru_unlock();
                return NULL;
        }
        for (i = 0; i < BH_LRU_SIZE; i++) {
                struct buffer_head *bh = __this_cpu_read(bh_lrus.bhs[i]);

                if (bh && bh->b_blocknr == block && bh->b_bdev == bdev &&
                    bh->b_size == size) {
                        if (i) {
                                while (i) {
                                        __this_cpu_write(bh_lrus.bhs[i],
                                                __this_cpu_read(bh_lrus.bhs[i - 1]));
                                        i--;
                                }
                                __this_cpu_write(bh_lrus.bhs[0], bh);
                        }
                        get_bh(bh);
                        ret = bh;
                        break;
                }
        }
        bh_lru_unlock();
        return ret;
}

/*
 * Perform a pagecache lookup for the matching buffer.  If it's there, refresh
 * it in the LRU and mark it as accessed.  If it is not present then return
 * NULL. Atomic context callers may also return NULL if the buffer is being
 * migrated; similarly the page is not marked accessed either.
 */
static struct buffer_head *
find_get_block_common(struct block_device *bdev, sector_t block,
                        unsigned size, bool atomic)
{
        struct buffer_head *bh = lookup_bh_lru(bdev, block, size);

        if (bh == NULL) {
                /* __find_get_block_slow will mark the page accessed */
                bh = __find_get_block_slow(bdev, block, atomic);
                if (bh)
                        bh_lru_install(bh);
        } else
                touch_buffer(bh);

        return bh;
}

struct buffer_head *
__find_get_block(struct block_device *bdev, sector_t block, unsigned size)
{
        return find_get_block_common(bdev, block, size, true);
}
EXPORT_SYMBOL(__find_get_block);

/* same as __find_get_block() but allows sleeping contexts */
struct buffer_head *
__find_get_block_nonatomic(struct block_device *bdev, sector_t block,
                           unsigned size)
{
        return find_get_block_common(bdev, block, size, false);
}
EXPORT_SYMBOL(__find_get_block_nonatomic);

/**
 * bdev_getblk - Get a buffer_head in a block device's buffer cache.
 * @bdev: The block device.
 * @block: The block number.
 * @size: The size of buffer_heads for this @bdev.
 * @gfp: The memory allocation flags to use.
 *
 * The returned buffer head has its reference count incremented, but is
 * not locked.  The caller should call brelse() when it has finished
 * with the buffer.  The buffer may not be uptodate.  If needed, the
 * caller can bring it uptodate either by reading it or overwriting it.
 *
 * Return: The buffer head, or NULL if memory could not be allocated.
 */
struct buffer_head *bdev_getblk(struct block_device *bdev, sector_t block,
                unsigned size, gfp_t gfp)
{
        struct buffer_head *bh;

        if (gfpflags_allow_blocking(gfp))
                bh = __find_get_block_nonatomic(bdev, block, size);
        else
                bh = __find_get_block(bdev, block, size);

        might_alloc(gfp);
        if (bh)
                return bh;

        return __getblk_slow(bdev, block, size, gfp);
}
EXPORT_SYMBOL(bdev_getblk);

/*
 * Do async read-ahead on a buffer..
 */
void __breadahead(struct block_device *bdev, sector_t block, unsigned size)
{
        struct buffer_head *bh = bdev_getblk(bdev, block, size,
                        GFP_NOWAIT | __GFP_MOVABLE);

        if (likely(bh)) {
                bh_readahead(bh, REQ_RAHEAD);
                brelse(bh);
        }
}
EXPORT_SYMBOL(__breadahead);

/**
 * __bread_gfp() - Read a block.
 * @bdev: The block device to read from.
 * @block: Block number in units of block size.
 * @size: The block size of this device in bytes.
 * @gfp: Not page allocation flags; see below.
 *
 * You are not expected to call this function.  You should use one of
 * sb_bread(), sb_bread_unmovable() or __bread().
 *
 * Read a specified block, and return the buffer head that refers to it.
 * If @gfp is 0, the memory will be allocated using the block device's
 * default GFP flags.  If @gfp is __GFP_MOVABLE, the memory may be
 * allocated from a movable area.  Do not pass in a complete set of
 * GFP flags.
 *
 * The returned buffer head has its refcount increased.  The caller should
 * call brelse() when it has finished with the buffer.
 *
 * Context: May sleep waiting for I/O.
 * Return: NULL if the block was unreadable.
 */
struct buffer_head *__bread_gfp(struct block_device *bdev, sector_t block,
                unsigned size, gfp_t gfp)
{
        struct buffer_head *bh;

        gfp |= mapping_gfp_constraint(bdev->bd_mapping, ~__GFP_FS);

        /*
         * Prefer looping in the allocator rather than here, at least that
         * code knows what it's doing.
         */
        gfp |= __GFP_NOFAIL;

        bh = bdev_getblk(bdev, block, size, gfp);

        if (likely(bh) && !buffer_uptodate(bh))
                bh = __bread_slow(bh);
        return bh;
}
EXPORT_SYMBOL(__bread_gfp);

static void __invalidate_bh_lrus(struct bh_lru *b)
{
        int i;

        for (i = 0; i < BH_LRU_SIZE; i++) {
                brelse(b->bhs[i]);
                b->bhs[i] = NULL;
        }
}
/*
 * invalidate_bh_lrus() is called rarely - but not only at unmount.
 * This doesn't race because it runs in each cpu either in irq
 * or with preempt disabled.
 */
static void invalidate_bh_lru(void *arg)
{
        struct bh_lru *b = &get_cpu_var(bh_lrus);

        __invalidate_bh_lrus(b);
        put_cpu_var(bh_lrus);
}

bool has_bh_in_lru(int cpu, void *dummy)
{
        struct bh_lru *b = per_cpu_ptr(&bh_lrus, cpu);
        int i;
        
        for (i = 0; i < BH_LRU_SIZE; i++) {
                if (b->bhs[i])
                        return true;
        }

        return false;
}

void invalidate_bh_lrus(void)
{
        on_each_cpu_cond(has_bh_in_lru, invalidate_bh_lru, NULL, 1);
}
EXPORT_SYMBOL_GPL(invalidate_bh_lrus);

/*
 * It's called from workqueue context so we need a bh_lru_lock to close
 * the race with preemption/irq.
 */
void invalidate_bh_lrus_cpu(void)
{
        struct bh_lru *b;

        bh_lru_lock();
        b = this_cpu_ptr(&bh_lrus);
        __invalidate_bh_lrus(b);
        bh_lru_unlock();
}

void folio_set_bh(struct buffer_head *bh, struct folio *folio,
                  unsigned long offset)
{
        bh->b_folio = folio;
        BUG_ON(offset >= folio_size(folio));
        if (folio_test_highmem(folio))
                /*
                 * This catches illegal uses and preserves the offset:
                 */
                bh->b_data = (char *)(0 + offset);
        else
                bh->b_data = folio_address(folio) + offset;
}
EXPORT_SYMBOL(folio_set_bh);

/*
 * Called when truncating a buffer on a page completely.
 */

/* Bits that are cleared during an invalidate */
#define BUFFER_FLAGS_DISCARD \
        (1 << BH_Mapped | 1 << BH_New | 1 << BH_Req | \
         1 << BH_Delay | 1 << BH_Unwritten)

static void discard_buffer(struct buffer_head * bh)
{
        unsigned long b_state;

        lock_buffer(bh);
        clear_buffer_dirty(bh);
        bh->b_bdev = NULL;
        b_state = READ_ONCE(bh->b_state);
        do {
        } while (!try_cmpxchg_relaxed(&bh->b_state, &b_state,
                                      b_state & ~BUFFER_FLAGS_DISCARD));
        unlock_buffer(bh);
}

/**
 * block_invalidate_folio - Invalidate part or all of a buffer-backed folio.
 * @folio: The folio which is affected.
 * @offset: start of the range to invalidate
 * @length: length of the range to invalidate
 *
 * block_invalidate_folio() is called when all or part of the folio has been
 * invalidated by a truncate operation.
 *
 * block_invalidate_folio() does not have to release all buffers, but it must
 * ensure that no dirty buffer is left outside @offset and that no I/O
 * is underway against any of the blocks which are outside the truncation
 * point.  Because the caller is about to free (and possibly reuse) those
 * blocks on-disk.
 */
void block_invalidate_folio(struct folio *folio, size_t offset, size_t length)
{
        struct buffer_head *head, *bh, *next;
        size_t curr_off = 0;
        size_t stop = length + offset;

        BUG_ON(!folio_test_locked(folio));

        /*
         * Check for overflow
         */
        BUG_ON(stop > folio_size(folio) || stop < length);

        head = folio_buffers(folio);
        if (!head)
                return;

        bh = head;
        do {
                size_t next_off = curr_off + bh->b_size;
                next = bh->b_this_page;

                /*
                 * Are we still fully in range ?
                 */
                if (next_off > stop)
                        goto out;

                /*
                 * is this block fully invalidated?
                 */
                if (offset <= curr_off)
                        discard_buffer(bh);
                curr_off = next_off;
                bh = next;
        } while (bh != head);

        /*
         * We release buffers only if the entire folio is being invalidated.
         * The get_block cached value has been unconditionally invalidated,
         * so real IO is not possible anymore.
         */
        if (length == folio_size(folio))
                filemap_release_folio(folio, 0);
out:
        folio_clear_mappedtodisk(folio);
}
EXPORT_SYMBOL(block_invalidate_folio);

/*
 * We attach and possibly dirty the buffers atomically wrt
 * block_dirty_folio() via i_private_lock.  try_to_free_buffers
 * is already excluded via the folio lock.
 */
struct buffer_head *create_empty_buffers(struct folio *folio,
                unsigned long blocksize, unsigned long b_state)
{
        struct buffer_head *bh, *head, *tail;
        gfp_t gfp = GFP_NOFS | __GFP_ACCOUNT | __GFP_NOFAIL;

        head = folio_alloc_buffers(folio, blocksize, gfp);
        bh = head;
        do {
                bh->b_state |= b_state;
                tail = bh;
                bh = bh->b_this_page;
        } while (bh);
        tail->b_this_page = head;

        spin_lock(&folio->mapping->i_private_lock);
        if (folio_test_uptodate(folio) || folio_test_dirty(folio)) {
                bh = head;
                do {
                        if (folio_test_dirty(folio))
                                set_buffer_dirty(bh);
                        if (folio_test_uptodate(folio))
                                set_buffer_uptodate(bh);
                        bh = bh->b_this_page;
                } while (bh != head);
        }
        folio_attach_private(folio, head);
        spin_unlock(&folio->mapping->i_private_lock);

        return head;
}
EXPORT_SYMBOL(create_empty_buffers);

/**
 * clean_bdev_aliases: clean a range of buffers in block device
 * @bdev: Block device to clean buffers in
 * @block: Start of a range of blocks to clean
 * @len: Number of blocks to clean
 *
 * We are taking a range of blocks for data and we don't want writeback of any
 * buffer-cache aliases starting from return from this function and until the
 * moment when something will explicitly mark the buffer dirty (hopefully that
 * will not happen until we will free that block ;-) We don't even need to mark
 * it not-uptodate - nobody can expect anything from a newly allocated buffer
 * anyway. We used to use unmap_buffer() for such invalidation, but that was
 * wrong. We definitely don't want to mark the alias unmapped, for example - it
 * would confuse anyone who might pick it with bread() afterwards...
 *
 * Also..  Note that bforget() doesn't lock the buffer.  So there can be
 * writeout I/O going on against recently-freed buffers.  We don't wait on that
 * I/O in bforget() - it's more efficient to wait on the I/O only if we really
 * need to.  That happens here.
 */
void clean_bdev_aliases(struct block_device *bdev, sector_t block, sector_t len)
{
        struct address_space *bd_mapping = bdev->bd_mapping;
        const int blkbits = bd_mapping->host->i_blkbits;
        struct folio_batch fbatch;
        pgoff_t index = ((loff_t)block << blkbits) / PAGE_SIZE;
        pgoff_t end;
        int i, count;
        struct buffer_head *bh;
        struct buffer_head *head;

        end = ((loff_t)(block + len - 1) << blkbits) / PAGE_SIZE;
        folio_batch_init(&fbatch);
        while (filemap_get_folios(bd_mapping, &index, end, &fbatch)) {
                count = folio_batch_count(&fbatch);
                for (i = 0; i < count; i++) {
                        struct folio *folio = fbatch.folios[i];

                        if (!folio_buffers(folio))
                                continue;
                        /*
                         * We use folio lock instead of bd_mapping->i_private_lock
                         * to pin buffers here since we can afford to sleep and
                         * it scales better than a global spinlock lock.
                         */
                        folio_lock(folio);
                        /* Recheck when the folio is locked which pins bhs */
                        head = folio_buffers(folio);
                        if (!head)
                                goto unlock_page;
                        bh = head;
                        do {
                                if (!buffer_mapped(bh) || (bh->b_blocknr < block))
                                        goto next;
                                if (bh->b_blocknr >= block + len)
                                        break;
                                clear_buffer_dirty(bh);
                                wait_on_buffer(bh);
                                clear_buffer_req(bh);
next:
                                bh = bh->b_this_page;
                        } while (bh != head);
unlock_page:
                        folio_unlock(folio);
                }
                folio_batch_release(&fbatch);
                cond_resched();
                /* End of range already reached? */
                if (index > end || !index)
                        break;
        }
}
EXPORT_SYMBOL(clean_bdev_aliases);

static struct buffer_head *folio_create_buffers(struct folio *folio,
                                                struct inode *inode,
                                                unsigned int b_state)
{
        struct buffer_head *bh;

        BUG_ON(!folio_test_locked(folio));

        bh = folio_buffers(folio);
        if (!bh)
                bh = create_empty_buffers(folio,
                                1 << READ_ONCE(inode->i_blkbits), b_state);
        return bh;
}

/*
 * NOTE! All mapped/uptodate combinations are valid:
 *
 *      Mapped  Uptodate        Meaning
 *
 *      No      No              "unknown" - must do get_block()
 *      No      Yes             "hole" - zero-filled
 *      Yes     No              "allocated" - allocated on disk, not read in
 *      Yes     Yes             "valid" - allocated and up-to-date in memory.
 *
 * "Dirty" is valid only with the last case (mapped+uptodate).
 */

/*
 * While block_write_full_folio is writing back the dirty buffers under
 * the page lock, whoever dirtied the buffers may decide to clean them
 * again at any time.  We handle that by only looking at the buffer
 * state inside lock_buffer().
 *
 * If block_write_full_folio() is called for regular writeback
 * (wbc->sync_mode == WB_SYNC_NONE) then it will redirty a page which has a
 * locked buffer.   This only can happen if someone has written the buffer
 * directly, with submit_bh().  At the address_space level PageWriteback
 * prevents this contention from occurring.
 *
 * If block_write_full_folio() is called with wbc->sync_mode ==
 * WB_SYNC_ALL, the writes are posted using REQ_SYNC; this
 * causes the writes to be flagged as synchronous writes.
 */
int __block_write_full_folio(struct inode *inode, struct folio *folio,
                        get_block_t *get_block, struct writeback_control *wbc)
{
        int err;
        sector_t block;
        sector_t last_block;
        struct buffer_head *bh, *head;
        size_t blocksize;
        int nr_underway = 0;
        blk_opf_t write_flags = wbc_to_write_flags(wbc);

        head = folio_create_buffers(folio, inode,
                                    (1 << BH_Dirty) | (1 << BH_Uptodate));

        /*
         * Be very careful.  We have no exclusion from block_dirty_folio
         * here, and the (potentially unmapped) buffers may become dirty at
         * any time.  If a buffer becomes dirty here after we've inspected it
         * then we just miss that fact, and the folio stays dirty.
         *
         * Buffers outside i_size may be dirtied by block_dirty_folio;
         * handle that here by just cleaning them.
         */

        bh = head;
        blocksize = bh->b_size;

        block = div_u64(folio_pos(folio), blocksize);
        last_block = div_u64(i_size_read(inode) - 1, blocksize);

        /*
         * Get all the dirty buffers mapped to disk addresses and
         * handle any aliases from the underlying blockdev's mapping.
         */
        do {
                if (block > last_block) {
                        /*
                         * mapped buffers outside i_size will occur, because
                         * this folio can be outside i_size when there is a
                         * truncate in progress.
                         */
                        /*
                         * The buffer was zeroed by block_write_full_folio()
                         */
                        clear_buffer_dirty(bh);
                        set_buffer_uptodate(bh);
                } else if ((!buffer_mapped(bh) || buffer_delay(bh)) &&
                           buffer_dirty(bh)) {
                        WARN_ON(bh->b_size != blocksize);
                        err = get_block(inode, block, bh, 1);
                        if (err)
                                goto recover;
                        clear_buffer_delay(bh);
                        if (buffer_new(bh)) {
                                /* blockdev mappings never come here */
                                clear_buffer_new(bh);
                                clean_bdev_bh_alias(bh);
                        }
                }
                bh = bh->b_this_page;
                block++;
        } while (bh != head);

        do {
                if (!buffer_mapped(bh))
                        continue;
                /*
                 * If it's a fully non-blocking write attempt and we cannot
                 * lock the buffer then redirty the folio.  Note that this can
                 * potentially cause a busy-wait loop from writeback threads
                 * and kswapd activity, but those code paths have their own
                 * higher-level throttling.
                 */
                if (wbc->sync_mode != WB_SYNC_NONE) {
                        lock_buffer(bh);
                } else if (!trylock_buffer(bh)) {
                        folio_redirty_for_writepage(wbc, folio);
                        continue;
                }
                if (test_clear_buffer_dirty(bh)) {
                        mark_buffer_async_write_endio(bh,
                                end_buffer_async_write);
                } else {
                        unlock_buffer(bh);
                }
        } while ((bh = bh->b_this_page) != head);

        /*
         * The folio and its buffers are protected by the writeback flag,
         * so we can drop the bh refcounts early.
         */
        BUG_ON(folio_test_writeback(folio));
        folio_start_writeback(folio);

        do {
                struct buffer_head *next = bh->b_this_page;
                if (buffer_async_write(bh)) {
                        submit_bh_wbc(REQ_OP_WRITE | write_flags, bh,
                                      inode->i_write_hint, wbc);
                        nr_underway++;
                }
                bh = next;
        } while (bh != head);
        folio_unlock(folio);

        err = 0;
done:
        if (nr_underway == 0) {
                /*
                 * The folio was marked dirty, but the buffers were
                 * clean.  Someone wrote them back by hand with
                 * write_dirty_buffer/submit_bh.  A rare case.
                 */
                folio_end_writeback(folio);

                /*
                 * The folio and buffer_heads can be released at any time from
                 * here on.
                 */
        }
        return err;

recover:
        /*
         * ENOSPC, or some other error.  We may already have added some
         * blocks to the file, so we need to write these out to avoid
         * exposing stale data.
         * The folio is currently locked and not marked for writeback
         */
        bh = head;
        /* Recovery: lock and submit the mapped buffers */
        do {
                if (buffer_mapped(bh) && buffer_dirty(bh) &&
                    !buffer_delay(bh)) {
                        lock_buffer(bh);
                        mark_buffer_async_write_endio(bh,
                                end_buffer_async_write);
                } else {
                        /*
                         * The buffer may have been set dirty during
                         * attachment to a dirty folio.
                         */
                        clear_buffer_dirty(bh);
                }
        } while ((bh = bh->b_this_page) != head);
        BUG_ON(folio_test_writeback(folio));
        mapping_set_error(folio->mapping, err);
        folio_start_writeback(folio);
        do {
                struct buffer_head *next = bh->b_this_page;
                if (buffer_async_write(bh)) {
                        clear_buffer_dirty(bh);
                        submit_bh_wbc(REQ_OP_WRITE | write_flags, bh,
                                      inode->i_write_hint, wbc);
                        nr_underway++;
                }
                bh = next;
        } while (bh != head);
        folio_unlock(folio);
        goto done;
}
EXPORT_SYMBOL(__block_write_full_folio);

/*
 * If a folio has any new buffers, zero them out here, and mark them uptodate
 * and dirty so they'll be written out (in order to prevent uninitialised
 * block data from leaking). And clear the new bit.
 */
void folio_zero_new_buffers(struct folio *folio, size_t from, size_t to)
{
        size_t block_start, block_end;
        struct buffer_head *head, *bh;

        BUG_ON(!folio_test_locked(folio));
        head = folio_buffers(folio);
        if (!head)
                return;

        bh = head;
        block_start = 0;
        do {
                block_end = block_start + bh->b_size;

                if (buffer_new(bh)) {
                        if (block_end > from && block_start < to) {
                                if (!folio_test_uptodate(folio)) {
                                        size_t start, xend;

                                        start = max(from, block_start);
                                        xend = min(to, block_end);

                                        folio_zero_segment(folio, start, xend);
                                        set_buffer_uptodate(bh);
                                }

                                clear_buffer_new(bh);
                                mark_buffer_dirty(bh);
                        }
                }

                block_start = block_end;
                bh = bh->b_this_page;
        } while (bh != head);
}
EXPORT_SYMBOL(folio_zero_new_buffers);

static int
iomap_to_bh(struct inode *inode, sector_t block, struct buffer_head *bh,
                const struct iomap *iomap)
{
        loff_t offset = (loff_t)block << inode->i_blkbits;

        bh->b_bdev = iomap->bdev;

        /*
         * Block points to offset in file we need to map, iomap contains
         * the offset at which the map starts. If the map ends before the
         * current block, then do not map the buffer and let the caller
         * handle it.
         */
        if (offset >= iomap->offset + iomap->length)
                return -EIO;

        switch (iomap->type) {
        case IOMAP_HOLE:
                /*
                 * If the buffer is not up to date or beyond the current EOF,
                 * we need to mark it as new to ensure sub-block zeroing is
                 * executed if necessary.
                 */
                if (!buffer_uptodate(bh) ||
                    (offset >= i_size_read(inode)))
                        set_buffer_new(bh);
                return 0;
        case IOMAP_DELALLOC:
                if (!buffer_uptodate(bh) ||
                    (offset >= i_size_read(inode)))
                        set_buffer_new(bh);
                set_buffer_uptodate(bh);
                set_buffer_mapped(bh);
                set_buffer_delay(bh);
                return 0;
        case IOMAP_UNWRITTEN:
                /*
                 * For unwritten regions, we always need to ensure that regions
                 * in the block we are not writing to are zeroed. Mark the
                 * buffer as new to ensure this.
                 */
                set_buffer_new(bh);
                set_buffer_unwritten(bh);
                fallthrough;
        case IOMAP_MAPPED:
                if ((iomap->flags & IOMAP_F_NEW) ||
                    offset >= i_size_read(inode)) {
                        /*
                         * This can happen if truncating the block device races
                         * with the check in the caller as i_size updates on
                         * block devices aren't synchronized by i_rwsem for
                         * block devices.
                         */
                        if (S_ISBLK(inode->i_mode))
                                return -EIO;
                        set_buffer_new(bh);
                }
                bh->b_blocknr = (iomap->addr + offset - iomap->offset) >>
                                inode->i_blkbits;
                set_buffer_mapped(bh);
                return 0;
        default:
                WARN_ON_ONCE(1);
                return -EIO;
        }
}

int __block_write_begin_int(struct folio *folio, loff_t pos, unsigned len,
                get_block_t *get_block, const struct iomap *iomap)
{
        size_t from = offset_in_folio(folio, pos);
        size_t to = from + len;
        struct inode *inode = folio->mapping->host;
        size_t block_start, block_end;
        sector_t block;
        int err = 0;
        size_t blocksize;
        struct buffer_head *bh, *head, *wait[2], **wait_bh=wait;

        BUG_ON(!folio_test_locked(folio));
        BUG_ON(to > folio_size(folio));
        BUG_ON(from > to);

        head = folio_create_buffers(folio, inode, 0);
        blocksize = head->b_size;
        block = div_u64(folio_pos(folio), blocksize);

        for (bh = head, block_start = 0; bh != head || !block_start;
            block++, block_start=block_end, bh = bh->b_this_page) {
                block_end = block_start + blocksize;
                if (block_end <= from || block_start >= to) {
                        if (folio_test_uptodate(folio)) {
                                if (!buffer_uptodate(bh))
                                        set_buffer_uptodate(bh);
                        }
                        continue;
                }
                if (buffer_new(bh))
                        clear_buffer_new(bh);
                if (!buffer_mapped(bh)) {
                        WARN_ON(bh->b_size != blocksize);
                        if (get_block)
                                err = get_block(inode, block, bh, 1);
                        else
                                err = iomap_to_bh(inode, block, bh, iomap);
                        if (err)
                                break;

                        if (buffer_new(bh)) {
                                clean_bdev_bh_alias(bh);
                                if (folio_test_uptodate(folio)) {
                                        clear_buffer_new(bh);
                                        set_buffer_uptodate(bh);
                                        mark_buffer_dirty(bh);
                                        continue;
                                }
                                if (block_end > to || block_start < from)
                                        folio_zero_segments(folio,
                                                to, block_end,
                                                block_start, from);
                                continue;
                        }
                }
                if (folio_test_uptodate(folio)) {
                        if (!buffer_uptodate(bh))
                                set_buffer_uptodate(bh);
                        continue; 
                }
                if (!buffer_uptodate(bh) && !buffer_delay(bh) &&
                    !buffer_unwritten(bh) &&
                     (block_start < from || block_end > to)) {
                        bh_read_nowait(bh, 0);
                        *wait_bh++=bh;
                }
        }
        /*
         * If we issued read requests - let them complete.
         */
        while(wait_bh > wait) {
                wait_on_buffer(*--wait_bh);
                if (!buffer_uptodate(*wait_bh))
                        err = -EIO;
        }
        if (unlikely(err))
                folio_zero_new_buffers(folio, from, to);
        return err;
}

int __block_write_begin(struct folio *folio, loff_t pos, unsigned len,
                get_block_t *get_block)
{
        return __block_write_begin_int(folio, pos, len, get_block, NULL);
}
EXPORT_SYMBOL(__block_write_begin);

void block_commit_write(struct folio *folio, size_t from, size_t to)
{
        size_t block_start, block_end;
        bool partial = false;
        unsigned blocksize;
        struct buffer_head *bh, *head;

        bh = head = folio_buffers(folio);
        if (!bh)
                return;
        blocksize = bh->b_size;

        block_start = 0;
        do {
                block_end = block_start + blocksize;
                if (block_end <= from || block_start >= to) {
                        if (!buffer_uptodate(bh))
                                partial = true;
                } else {
                        set_buffer_uptodate(bh);
                        mark_buffer_dirty(bh);
                }
                if (buffer_new(bh))
                        clear_buffer_new(bh);

                block_start = block_end;
                bh = bh->b_this_page;
        } while (bh != head);

        /*
         * If this is a partial write which happened to make all buffers
         * uptodate then we can optimize away a bogus read_folio() for
         * the next read(). Here we 'discover' whether the folio went
         * uptodate as a result of this (potentially partial) write.
         */
        if (!partial)
                folio_mark_uptodate(folio);
}
EXPORT_SYMBOL(block_commit_write);

/*
 * block_write_begin takes care of the basic task of block allocation and
 * bringing partial write blocks uptodate first.
 *
 * The filesystem needs to handle block truncation upon failure.
 */
int block_write_begin(struct address_space *mapping, loff_t pos, unsigned len,
                struct folio **foliop, get_block_t *get_block)
{
        pgoff_t index = pos >> PAGE_SHIFT;
        struct folio *folio;
        int status;

        folio = __filemap_get_folio(mapping, index, FGP_WRITEBEGIN,
                        mapping_gfp_mask(mapping));
        if (IS_ERR(folio))
                return PTR_ERR(folio);

        status = __block_write_begin_int(folio, pos, len, get_block, NULL);
        if (unlikely(status)) {
                folio_unlock(folio);
                folio_put(folio);
                folio = NULL;
        }

        *foliop = folio;
        return status;
}
EXPORT_SYMBOL(block_write_begin);

int block_write_end(loff_t pos, unsigned len, unsigned copied,
                struct folio *folio)
{
        size_t start = pos - folio_pos(folio);

        if (unlikely(copied < len)) {
                /*
                 * The buffers that were written will now be uptodate, so
                 * we don't have to worry about a read_folio reading them
                 * and overwriting a partial write. However if we have
                 * encountered a short write and only partially written
                 * into a buffer, it will not be marked uptodate, so a
                 * read_folio might come in and destroy our partial write.
                 *
                 * Do the simplest thing, and just treat any short write to a
                 * non uptodate folio as a zero-length write, and force the
                 * caller to redo the whole thing.
                 */
                if (!folio_test_uptodate(folio))
                        copied = 0;

                folio_zero_new_buffers(folio, start+copied, start+len);
        }
        flush_dcache_folio(folio);

        /* This could be a short (even 0-length) commit */
        block_commit_write(folio, start, start + copied);

        return copied;
}
EXPORT_SYMBOL(block_write_end);

int generic_write_end(const struct kiocb *iocb, struct address_space *mapping,
                      loff_t pos, unsigned len, unsigned copied,
                      struct folio *folio, void *fsdata)
{
        struct inode *inode = mapping->host;
        loff_t old_size = inode->i_size;
        bool i_size_changed = false;

        copied = block_write_end(pos, len, copied, folio);

        /*
         * No need to use i_size_read() here, the i_size cannot change under us
         * because we hold i_rwsem.
         *
         * But it's important to update i_size while still holding folio lock:
         * page writeout could otherwise come in and zero beyond i_size.
         */
        if (pos + copied > inode->i_size) {
                i_size_write(inode, pos + copied);
                i_size_changed = true;
        }

        folio_unlock(folio);
        folio_put(folio);

        if (old_size < pos)
                pagecache_isize_extended(inode, old_size, pos);
        /*
         * Don't mark the inode dirty under page lock. First, it unnecessarily
         * makes the holding time of page lock longer. Second, it forces lock
         * ordering of page lock and transaction start for journaling
         * filesystems.
         */
        if (i_size_changed)
                mark_inode_dirty(inode);
        return copied;
}
EXPORT_SYMBOL(generic_write_end);

/*
 * block_is_partially_uptodate checks whether buffers within a folio are
 * uptodate or not.
 *
 * Returns true if all buffers which correspond to the specified part
 * of the folio are uptodate.
 */
bool block_is_partially_uptodate(struct folio *folio, size_t from, size_t count)
{
        unsigned block_start, block_end, blocksize;
        unsigned to;
        struct buffer_head *bh, *head;
        bool ret = true;

        head = folio_buffers(folio);
        if (!head)
                return false;
        blocksize = head->b_size;
        to = min(folio_size(folio) - from, count);
        to = from + to;
        if (from < blocksize && to > folio_size(folio) - blocksize)
                return false;

        bh = head;
        block_start = 0;
        do {
                block_end = block_start + blocksize;
                if (block_end > from && block_start < to) {
                        if (!buffer_uptodate(bh)) {
                                ret = false;
                                break;
                        }
                        if (block_end >= to)
                                break;
                }
                block_start = block_end;
                bh = bh->b_this_page;
        } while (bh != head);

        return ret;
}
EXPORT_SYMBOL(block_is_partially_uptodate);

/*
 * Generic "read_folio" function for block devices that have the normal
 * get_block functionality. This is most of the block device filesystems.
 * Reads the folio asynchronously --- the unlock_buffer() and
 * set/clear_buffer_uptodate() functions propagate buffer state into the
 * folio once IO has completed.
 */
int block_read_full_folio(struct folio *folio, get_block_t *get_block)
{
        struct inode *inode = folio->mapping->host;
        sector_t iblock, lblock;
        struct buffer_head *bh, *head, *prev = NULL;
        size_t blocksize;
        int fully_mapped = 1;
        bool page_error = false;
        loff_t limit = i_size_read(inode);

        /* This is needed for ext4. */
        if (IS_ENABLED(CONFIG_FS_VERITY) && IS_VERITY(inode))
                limit = inode->i_sb->s_maxbytes;

        head = folio_create_buffers(folio, inode, 0);
        blocksize = head->b_size;

        iblock = div_u64(folio_pos(folio), blocksize);
        lblock = div_u64(limit + blocksize - 1, blocksize);
        bh = head;

        do {
                if (buffer_uptodate(bh))
                        continue;

                if (!buffer_mapped(bh)) {
                        int err = 0;

                        fully_mapped = 0;
                        if (iblock < lblock) {
                                WARN_ON(bh->b_size != blocksize);
                                err = get_block(inode, iblock, bh, 0);
                                if (err)
                                        page_error = true;
                        }
                        if (!buffer_mapped(bh)) {
                                folio_zero_range(folio, bh_offset(bh),
                                                blocksize);
                                if (!err)
                                        set_buffer_uptodate(bh);
                                continue;
                        }
                        /*
                         * get_block() might have updated the buffer
                         * synchronously
                         */
                        if (buffer_uptodate(bh))
                                continue;
                }

                lock_buffer(bh);
                if (buffer_uptodate(bh)) {
                        unlock_buffer(bh);
                        continue;
                }

                mark_buffer_async_read(bh);
                if (prev)
                        submit_bh(REQ_OP_READ, prev);
                prev = bh;
        } while (iblock++, (bh = bh->b_this_page) != head);

        if (fully_mapped)
                folio_set_mappedtodisk(folio);

        /*
         * All buffers are uptodate or get_block() returned an error
         * when trying to map them - we must finish the read because
         * end_buffer_async_read() will never be called on any buffer
         * in this folio.
         */
        if (prev)
                submit_bh(REQ_OP_READ, prev);
        else
                folio_end_read(folio, !page_error);

        return 0;
}
EXPORT_SYMBOL(block_read_full_folio);

/* utility function for filesystems that need to do work on expanding
 * truncates.  Uses filesystem pagecache writes to allow the filesystem to
 * deal with the hole.  
 */
int generic_cont_expand_simple(struct inode *inode, loff_t size)
{
        struct address_space *mapping = inode->i_mapping;
        const struct address_space_operations *aops = mapping->a_ops;
        struct folio *folio;
        void *fsdata = NULL;
        int err;

        err = inode_newsize_ok(inode, size);
        if (err)
                goto out;

        err = aops->write_begin(NULL, mapping, size, 0, &folio, &fsdata);
        if (err)
                goto out;

        err = aops->write_end(NULL, mapping, size, 0, 0, folio, fsdata);
        BUG_ON(err > 0);

out:
        return err;
}
EXPORT_SYMBOL(generic_cont_expand_simple);

static int cont_expand_zero(const struct kiocb *iocb,
                            struct address_space *mapping,
                            loff_t pos, loff_t *bytes)
{
        struct inode *inode = mapping->host;
        const struct address_space_operations *aops = mapping->a_ops;
        unsigned int blocksize = i_blocksize(inode);
        struct folio *folio;
        void *fsdata = NULL;
        pgoff_t index, curidx;
        loff_t curpos;
        unsigned zerofrom, offset, len;
        int err = 0;

        index = pos >> PAGE_SHIFT;
        offset = pos & ~PAGE_MASK;

        while (index > (curidx = (curpos = *bytes)>>PAGE_SHIFT)) {
                zerofrom = curpos & ~PAGE_MASK;
                if (zerofrom & (blocksize-1)) {
                        *bytes |= (blocksize-1);
                        (*bytes)++;
                }
                len = PAGE_SIZE - zerofrom;

                err = aops->write_begin(iocb, mapping, curpos, len,
                                            &folio, &fsdata);
                if (err)
                        goto out;
                folio_zero_range(folio, offset_in_folio(folio, curpos), len);
                err = aops->write_end(iocb, mapping, curpos, len, len,
                                                folio, fsdata);
                if (err < 0)
                        goto out;
                BUG_ON(err != len);
                err = 0;

                balance_dirty_pages_ratelimited(mapping);

                if (fatal_signal_pending(current)) {
                        err = -EINTR;
                        goto out;
                }
        }

        /* page covers the boundary, find the boundary offset */
        if (index == curidx) {
                zerofrom = curpos & ~PAGE_MASK;
                /* if we will expand the thing last block will be filled */
                if (offset <= zerofrom) {
                        goto out;
                }
                if (zerofrom & (blocksize-1)) {
                        *bytes |= (blocksize-1);
                        (*bytes)++;
                }
                len = offset - zerofrom;

                err = aops->write_begin(iocb, mapping, curpos, len,
                                            &folio, &fsdata);
                if (err)
                        goto out;
                folio_zero_range(folio, offset_in_folio(folio, curpos), len);
                err = aops->write_end(iocb, mapping, curpos, len, len,
                                                folio, fsdata);
                if (err < 0)
                        goto out;
                BUG_ON(err != len);
                err = 0;
        }
out:
        return err;
}

/*
 * For moronic filesystems that do not allow holes in file.
 * We may have to extend the file.
 */
int cont_write_begin(const struct kiocb *iocb, struct address_space *mapping,
                     loff_t pos, unsigned len, struct folio **foliop,
                     void **fsdata, get_block_t *get_block, loff_t *bytes)
{
        struct inode *inode = mapping->host;
        unsigned int blocksize = i_blocksize(inode);
        unsigned int zerofrom;
        int err;

        err = cont_expand_zero(iocb, mapping, pos, bytes);
        if (err)
                return err;

        zerofrom = *bytes & ~PAGE_MASK;
        if (pos+len > *bytes && zerofrom & (blocksize-1)) {
                *bytes |= (blocksize-1);
                (*bytes)++;
        }

        return block_write_begin(mapping, pos, len, foliop, get_block);
}
EXPORT_SYMBOL(cont_write_begin);

/*
 * block_page_mkwrite() is not allowed to change the file size as it gets
 * called from a page fault handler when a page is first dirtied. Hence we must
 * be careful to check for EOF conditions here. We set the page up correctly
 * for a written page which means we get ENOSPC checking when writing into
 * holes and correct delalloc and unwritten extent mapping on filesystems that
 * support these features.
 *
 * We are not allowed to take the i_rwsem here so we have to play games to
 * protect against truncate races as the page could now be beyond EOF.  Because
 * truncate writes the inode size before removing pages, once we have the
 * page lock we can determine safely if the page is beyond EOF. If it is not
 * beyond EOF, then the page is guaranteed safe against truncation until we
 * unlock the page.
 *
 * Direct callers of this function should protect against filesystem freezing
 * using sb_start_pagefault() - sb_end_pagefault() functions.
 */
int block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
                         get_block_t get_block)
{
        struct folio *folio = page_folio(vmf->page);
        struct inode *inode = file_inode(vma->vm_file);
        unsigned long end;
        loff_t size;
        int ret;

        folio_lock(folio);
        size = i_size_read(inode);
        if ((folio->mapping != inode->i_mapping) ||
            (folio_pos(folio) >= size)) {
                /* We overload EFAULT to mean page got truncated */
                ret = -EFAULT;
                goto out_unlock;
        }

        end = folio_size(folio);
        /* folio is wholly or partially inside EOF */
        if (folio_pos(folio) + end > size)
                end = size - folio_pos(folio);

        ret = __block_write_begin_int(folio, 0, end, get_block, NULL);
        if (unlikely(ret))
                goto out_unlock;

        block_commit_write(folio, 0, end);

        folio_mark_dirty(folio);
        folio_wait_stable(folio);
        return 0;
out_unlock:
        folio_unlock(folio);
        return ret;
}
EXPORT_SYMBOL(block_page_mkwrite);

int block_truncate_page(struct address_space *mapping,
                        loff_t from, get_block_t *get_block)
{
        pgoff_t index = from >> PAGE_SHIFT;
        unsigned blocksize;
        sector_t iblock;
        size_t offset, length, pos;
        struct inode *inode = mapping->host;
        struct folio *folio;
        struct buffer_head *bh;
        int err = 0;

        blocksize = i_blocksize(inode);
        length = from & (blocksize - 1);

        /* Block boundary? Nothing to do */
        if (!length)
                return 0;

        length = blocksize - length;
        iblock = ((loff_t)index * PAGE_SIZE) >> inode->i_blkbits;

        folio = filemap_grab_folio(mapping, index);
        if (IS_ERR(folio))
                return PTR_ERR(folio);

        bh = folio_buffers(folio);
        if (!bh)
                bh = create_empty_buffers(folio, blocksize, 0);

        /* Find the buffer that contains "offset" */
        offset = offset_in_folio(folio, from);
        pos = blocksize;
        while (offset >= pos) {
                bh = bh->b_this_page;
                iblock++;
                pos += blocksize;
        }

        if (!buffer_mapped(bh)) {
                WARN_ON(bh->b_size != blocksize);
                err = get_block(inode, iblock, bh, 0);
                if (err)
                        goto unlock;
                /* unmapped? It's a hole - nothing to do */
                if (!buffer_mapped(bh))
                        goto unlock;
        }

        /* Ok, it's mapped. Make sure it's up-to-date */
        if (folio_test_uptodate(folio))
                set_buffer_uptodate(bh);

        if (!buffer_uptodate(bh) && !buffer_delay(bh) && !buffer_unwritten(bh)) {
                err = bh_read(bh, 0);
                /* Uhhuh. Read error. Complain and punt. */
                if (err < 0)
                        goto unlock;
        }

        folio_zero_range(folio, offset, length);
        mark_buffer_dirty(bh);

unlock:
        folio_unlock(folio);
        folio_put(folio);

        return err;
}
EXPORT_SYMBOL(block_truncate_page);

/*
 * The generic write folio function for buffer-backed address_spaces
 */
int block_write_full_folio(struct folio *folio, struct writeback_control *wbc,
                void *get_block)
{
        struct inode * const inode = folio->mapping->host;
        loff_t i_size = i_size_read(inode);

        /* Is the folio fully inside i_size? */
        if (folio_next_pos(folio) <= i_size)
                return __block_write_full_folio(inode, folio, get_block, wbc);

        /* Is the folio fully outside i_size? (truncate in progress) */
        if (folio_pos(folio) >= i_size) {
                folio_unlock(folio);
                return 0; /* don't care */
        }

        /*
         * The folio straddles i_size.  It must be zeroed out on each and every
         * writeback invocation because it may be mmapped.  "A file is mapped
         * in multiples of the page size.  For a file that is not a multiple of
         * the page size, the remaining memory is zeroed when mapped, and
         * writes to that region are not written out to the file."
         */
        folio_zero_segment(folio, offset_in_folio(folio, i_size),
                        folio_size(folio));
        return __block_write_full_folio(inode, folio, get_block, wbc);
}

sector_t generic_block_bmap(struct address_space *mapping, sector_t block,
                            get_block_t *get_block)
{
        struct inode *inode = mapping->host;
        struct buffer_head tmp = {
                .b_size = i_blocksize(inode),
        };

        get_block(inode, block, &tmp, 0);
        return tmp.b_blocknr;
}
EXPORT_SYMBOL(generic_block_bmap);

static void end_bio_bh_io_sync(struct bio *bio)
{
        struct buffer_head *bh = bio->bi_private;

        if (unlikely(bio_flagged(bio, BIO_QUIET)))
                set_bit(BH_Quiet, &bh->b_state);

        bh->b_end_io(bh, !bio->bi_status);
        bio_put(bio);
}

static void submit_bh_wbc(blk_opf_t opf, struct buffer_head *bh,
                          enum rw_hint write_hint,
                          struct writeback_control *wbc)
{
        const enum req_op op = opf & REQ_OP_MASK;
        struct bio *bio;

        BUG_ON(!buffer_locked(bh));
        BUG_ON(!buffer_mapped(bh));
        BUG_ON(!bh->b_end_io);
        BUG_ON(buffer_delay(bh));
        BUG_ON(buffer_unwritten(bh));

        /*
         * Only clear out a write error when rewriting
         */
        if (test_set_buffer_req(bh) && (op == REQ_OP_WRITE))
                clear_buffer_write_io_error(bh);

        if (buffer_meta(bh))
                opf |= REQ_META;
        if (buffer_prio(bh))
                opf |= REQ_PRIO;

        bio = bio_alloc(bh->b_bdev, 1, opf, GFP_NOIO);

        fscrypt_set_bio_crypt_ctx_bh(bio, bh, GFP_NOIO);

        bio->bi_iter.bi_sector = bh->b_blocknr * (bh->b_size >> 9);
        bio->bi_write_hint = write_hint;

        bio_add_folio_nofail(bio, bh->b_folio, bh->b_size, bh_offset(bh));

        bio->bi_end_io = end_bio_bh_io_sync;
        bio->bi_private = bh;

        /* Take care of bh's that straddle the end of the device */
        guard_bio_eod(bio);

        if (wbc) {
                wbc_init_bio(wbc, bio);
                wbc_account_cgroup_owner(wbc, bh->b_folio, bh->b_size);
        }

        blk_crypto_submit_bio(bio);
}

void submit_bh(blk_opf_t opf, struct buffer_head *bh)
{
        submit_bh_wbc(opf, bh, WRITE_LIFE_NOT_SET, NULL);
}
EXPORT_SYMBOL(submit_bh);

void write_dirty_buffer(struct buffer_head *bh, blk_opf_t op_flags)
{
        lock_buffer(bh);
        if (!test_clear_buffer_dirty(bh)) {
                unlock_buffer(bh);
                return;
        }
        bh->b_end_io = end_buffer_write_sync;
        get_bh(bh);
        submit_bh(REQ_OP_WRITE | op_flags, bh);
}
EXPORT_SYMBOL(write_dirty_buffer);

/*
 * For a data-integrity writeout, we need to wait upon any in-progress I/O
 * and then start new I/O and then wait upon it.  The caller must have a ref on
 * the buffer_head.
 */
int __sync_dirty_buffer(struct buffer_head *bh, blk_opf_t op_flags)
{
        WARN_ON(atomic_read(&bh->b_count) < 1);
        lock_buffer(bh);
        if (test_clear_buffer_dirty(bh)) {
                /*
                 * The bh should be mapped, but it might not be if the
                 * device was hot-removed. Not much we can do but fail the I/O.
                 */
                if (!buffer_mapped(bh)) {
                        unlock_buffer(bh);
                        return -EIO;
                }

                get_bh(bh);
                bh->b_end_io = end_buffer_write_sync;
                submit_bh(REQ_OP_WRITE | op_flags, bh);
                wait_on_buffer(bh);
                if (!buffer_uptodate(bh))
                        return -EIO;
        } else {
                unlock_buffer(bh);
        }
        return 0;
}
EXPORT_SYMBOL(__sync_dirty_buffer);

int sync_dirty_buffer(struct buffer_head *bh)
{
        return __sync_dirty_buffer(bh, REQ_SYNC);
}
EXPORT_SYMBOL(sync_dirty_buffer);

static inline int buffer_busy(struct buffer_head *bh)
{
        return atomic_read(&bh->b_count) |
                (bh->b_state & ((1 << BH_Dirty) | (1 << BH_Lock)));
}

static bool
drop_buffers(struct folio *folio, struct buffer_head **buffers_to_free)
{
        struct buffer_head *head = folio_buffers(folio);
        struct buffer_head *bh;

        bh = head;
        do {
                if (buffer_busy(bh))
                        goto failed;
                bh = bh->b_this_page;
        } while (bh != head);

        do {
                struct buffer_head *next = bh->b_this_page;

                if (bh->b_assoc_map)
                        __remove_assoc_queue(bh);
                bh = next;
        } while (bh != head);
        *buffers_to_free = head;
        folio_detach_private(folio);
        return true;
failed:
        return false;
}

/**
 * try_to_free_buffers - Release buffers attached to this folio.
 * @folio: The folio.
 *
 * If any buffers are in use (dirty, under writeback, elevated refcount),
 * no buffers will be freed.
 *
 * If the folio is dirty but all the buffers are clean then we need to
 * be sure to mark the folio clean as well.  This is because the folio
 * may be against a block device, and a later reattachment of buffers
 * to a dirty folio will set *all* buffers dirty.  Which would corrupt
 * filesystem data on the same device.
 *
 * The same applies to regular filesystem folios: if all the buffers are
 * clean then we set the folio clean and proceed.  To do that, we require
 * total exclusion from block_dirty_folio().  That is obtained with
 * i_private_lock.
 *
 * Exclusion against try_to_free_buffers may be obtained by either
 * locking the folio or by holding its mapping's i_private_lock.
 *
 * Context: Process context.  @folio must be locked.  Will not sleep.
 * Return: true if all buffers attached to this folio were freed.
 */
bool try_to_free_buffers(struct folio *folio)
{
        struct address_space * const mapping = folio->mapping;
        struct buffer_head *buffers_to_free = NULL;
        bool ret = 0;

        BUG_ON(!folio_test_locked(folio));
        if (folio_test_writeback(folio))
                return false;

        /* Misconfigured folio check */
        if (WARN_ON_ONCE(!folio_buffers(folio)))
                return true;

        if (mapping == NULL) {          /* can this still happen? */
                ret = drop_buffers(folio, &buffers_to_free);
                goto out;
        }

        spin_lock(&mapping->i_private_lock);
        ret = drop_buffers(folio, &buffers_to_free);

        /*
         * If the filesystem writes its buffers by hand (eg ext3)
         * then we can have clean buffers against a dirty folio.  We
         * clean the folio here; otherwise the VM will never notice
         * that the filesystem did any IO at all.
         *
         * Also, during truncate, discard_buffer will have marked all
         * the folio's buffers clean.  We discover that here and clean
         * the folio also.
         *
         * i_private_lock must be held over this entire operation in order
         * to synchronise against block_dirty_folio and prevent the
         * dirty bit from being lost.
         */
        if (ret)
                folio_cancel_dirty(folio);
        spin_unlock(&mapping->i_private_lock);
out:
        if (buffers_to_free) {
                struct buffer_head *bh = buffers_to_free;

                do {
                        struct buffer_head *next = bh->b_this_page;
                        free_buffer_head(bh);
                        bh = next;
                } while (bh != buffers_to_free);
        }
        return ret;
}
EXPORT_SYMBOL(try_to_free_buffers);

/*
 * Buffer-head allocation
 */
static struct kmem_cache *bh_cachep __ro_after_init;

/*
 * Once the number of bh's in the machine exceeds this level, we start
 * stripping them in writeback.
 */
static unsigned long max_buffer_heads __ro_after_init;

int buffer_heads_over_limit;

struct bh_accounting {
        int nr;                 /* Number of live bh's */
        int ratelimit;          /* Limit cacheline bouncing */
};

static DEFINE_PER_CPU(struct bh_accounting, bh_accounting) = {0, 0};

static void recalc_bh_state(void)
{
        int i;
        int tot = 0;

        if (__this_cpu_inc_return(bh_accounting.ratelimit) - 1 < 4096)
                return;
        __this_cpu_write(bh_accounting.ratelimit, 0);
        for_each_online_cpu(i)
                tot += per_cpu(bh_accounting, i).nr;
        buffer_heads_over_limit = (tot > max_buffer_heads);
}

struct buffer_head *alloc_buffer_head(gfp_t gfp_flags)
{
        struct buffer_head *ret = kmem_cache_zalloc(bh_cachep, gfp_flags);
        if (ret) {
                INIT_LIST_HEAD(&ret->b_assoc_buffers);
                spin_lock_init(&ret->b_uptodate_lock);
                preempt_disable();
                __this_cpu_inc(bh_accounting.nr);
                recalc_bh_state();
                preempt_enable();
        }
        return ret;
}
EXPORT_SYMBOL(alloc_buffer_head);

void free_buffer_head(struct buffer_head *bh)
{
        BUG_ON(!list_empty(&bh->b_assoc_buffers));
        kmem_cache_free(bh_cachep, bh);
        preempt_disable();
        __this_cpu_dec(bh_accounting.nr);
        recalc_bh_state();
        preempt_enable();
}
EXPORT_SYMBOL(free_buffer_head);

static int buffer_exit_cpu_dead(unsigned int cpu)
{
        int i;
        struct bh_lru *b = &per_cpu(bh_lrus, cpu);

        for (i = 0; i < BH_LRU_SIZE; i++) {
                brelse(b->bhs[i]);
                b->bhs[i] = NULL;
        }
        this_cpu_add(bh_accounting.nr, per_cpu(bh_accounting, cpu).nr);
        per_cpu(bh_accounting, cpu).nr = 0;
        return 0;
}

/**
 * bh_uptodate_or_lock - Test whether the buffer is uptodate
 * @bh: struct buffer_head
 *
 * Return true if the buffer is up-to-date and false,
 * with the buffer locked, if not.
 */
int bh_uptodate_or_lock(struct buffer_head *bh)
{
        if (!buffer_uptodate(bh)) {
                lock_buffer(bh);
                if (!buffer_uptodate(bh))
                        return 0;
                unlock_buffer(bh);
        }
        return 1;
}
EXPORT_SYMBOL(bh_uptodate_or_lock);

/**
 * __bh_read - Submit read for a locked buffer
 * @bh: struct buffer_head
 * @op_flags: appending REQ_OP_* flags besides REQ_OP_READ
 * @wait: wait until reading finish
 *
 * Returns zero on success or don't wait, and -EIO on error.
 */
int __bh_read(struct buffer_head *bh, blk_opf_t op_flags, bool wait)
{
        int ret = 0;

        BUG_ON(!buffer_locked(bh));

        get_bh(bh);
        bh->b_end_io = end_buffer_read_sync;
        submit_bh(REQ_OP_READ | op_flags, bh);
        if (wait) {
                wait_on_buffer(bh);
                if (!buffer_uptodate(bh))
                        ret = -EIO;
        }
        return ret;
}
EXPORT_SYMBOL(__bh_read);

/**
 * __bh_read_batch - Submit read for a batch of unlocked buffers
 * @nr: entry number of the buffer batch
 * @bhs: a batch of struct buffer_head
 * @op_flags: appending REQ_OP_* flags besides REQ_OP_READ
 * @force_lock: force to get a lock on the buffer if set, otherwise drops any
 *              buffer that cannot lock.
 *
 * Returns zero on success or don't wait, and -EIO on error.
 */
void __bh_read_batch(int nr, struct buffer_head *bhs[],
                     blk_opf_t op_flags, bool force_lock)
{
        int i;

        for (i = 0; i < nr; i++) {
                struct buffer_head *bh = bhs[i];

                if (buffer_uptodate(bh))
                        continue;

                if (force_lock)
                        lock_buffer(bh);
                else
                        if (!trylock_buffer(bh))
                                continue;

                if (buffer_uptodate(bh)) {
                        unlock_buffer(bh);
                        continue;
                }

                bh->b_end_io = end_buffer_read_sync;
                get_bh(bh);
                submit_bh(REQ_OP_READ | op_flags, bh);
        }
}
EXPORT_SYMBOL(__bh_read_batch);

void __init buffer_init(void)
{
        unsigned long nrpages;
        int ret;

        bh_cachep = KMEM_CACHE(buffer_head,
                                SLAB_RECLAIM_ACCOUNT|SLAB_PANIC);
        /*
         * Limit the bh occupancy to 10% of ZONE_NORMAL
         */
        nrpages = (nr_free_buffer_pages() * 10) / 100;
        max_buffer_heads = nrpages * (PAGE_SIZE / sizeof(struct buffer_head));
        ret = cpuhp_setup_state_nocalls(CPUHP_FS_BUFF_DEAD, "fs/buffer:dead",
                                        NULL, buffer_exit_cpu_dead);
        WARN_ON(ret < 0);
}