/*-
 * SPDX-License-Identifier: BSD-2-Clause
 *
 * Copyright (c) 2008 Alexander Motin <mav@FreeBSD.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef __SDHCI_H__
#define __SDHCI_H__

#include "opt_mmccam.h"

/* Macro for sizing the SDMA bounce buffer on the SDMA buffer boundary. */
#define SDHCI_SDMA_BNDRY_TO_BBUFSZ(bndry)       (4096 * (1 << bndry))

/* Controller doesn't honor resets unless we touch the clock register */
#define SDHCI_QUIRK_CLOCK_BEFORE_RESET                  (1 << 0)
/* Controller really supports DMA */
#define SDHCI_QUIRK_FORCE_DMA                           (1 << 1)
/* Controller has unusable DMA engine */
#define SDHCI_QUIRK_BROKEN_DMA                          (1 << 2)
/* Controller doesn't like to be reset when there is no card inserted. */
#define SDHCI_QUIRK_NO_CARD_NO_RESET                    (1 << 3)
/* Controller has flaky internal state so reset it on each ios change */
#define SDHCI_QUIRK_RESET_ON_IOS                        (1 << 4)
/* Controller can only DMA chunk sizes that are a multiple of 32 bits */
#define SDHCI_QUIRK_32BIT_DMA_SIZE                      (1 << 5)
/* Controller needs to be reset after each request to stay stable */
#define SDHCI_QUIRK_RESET_AFTER_REQUEST                 (1 << 6)
/* Controller has an off-by-one issue with timeout value */
#define SDHCI_QUIRK_INCR_TIMEOUT_CONTROL                (1 << 7)
/* Controller has broken read timings */
#define SDHCI_QUIRK_BROKEN_TIMINGS                      (1 << 8)
/* Controller needs lowered frequency */
#define SDHCI_QUIRK_LOWER_FREQUENCY                     (1 << 9)
/* Data timeout is invalid, should use SD clock */
#define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK             (1 << 10)
/* Timeout value is invalid, should be overridden */
#define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL                  (1 << 11)
/* SDHCI_CAPABILITIES is invalid */
#define SDHCI_QUIRK_MISSING_CAPS                        (1 << 12)
/* Hardware shifts the 136-bit response, don't do it in software. */
#define SDHCI_QUIRK_DONT_SHIFT_RESPONSE                 (1 << 13)
/* Wait to see reset bit asserted before waiting for de-asserted  */
#define SDHCI_QUIRK_WAITFOR_RESET_ASSERTED              (1 << 14)
/* Leave controller in standard mode when putting card in HS mode. */
#define SDHCI_QUIRK_DONT_SET_HISPD_BIT                  (1 << 15)
/* Alternate clock source is required when supplying a 400 KHz clock. */
#define SDHCI_QUIRK_BCM577XX_400KHZ_CLKSRC              (1 << 16)
/* Card insert/remove interrupts don't work, polling required. */
#define SDHCI_QUIRK_POLL_CARD_PRESENT                   (1 << 17)
/* All controller slots are non-removable. */
#define SDHCI_QUIRK_ALL_SLOTS_NON_REMOVABLE             (1 << 18)
/* Issue custom Intel controller reset sequence after power-up. */
#define SDHCI_QUIRK_INTEL_POWER_UP_RESET                (1 << 19)
/* Data timeout is invalid, use 1 MHz clock instead. */
#define SDHCI_QUIRK_DATA_TIMEOUT_1MHZ                   (1 << 20)
/* Controller doesn't allow access boot partitions. */
#define SDHCI_QUIRK_BOOT_NOACC                          (1 << 21)
/* Controller waits for busy responses. */
#define SDHCI_QUIRK_WAIT_WHILE_BUSY                     (1 << 22)
/* Controller supports eMMC DDR52 mode. */
#define SDHCI_QUIRK_MMC_DDR52                           (1 << 23)
/* Controller support for UHS DDR50 mode is broken. */
#define SDHCI_QUIRK_BROKEN_UHS_DDR50                    (1 << 24)
/* Controller support for eMMC HS200 mode is broken. */
#define SDHCI_QUIRK_BROKEN_MMC_HS200                    (1 << 25)
/* Controller reports support for eMMC HS400 mode as SDHCI_CAN_MMC_HS400. */
#define SDHCI_QUIRK_CAPS_BIT63_FOR_MMC_HS400            (1 << 26)
/* Controller support for SDHCI_CTRL2_PRESET_VALUE is broken. */
#define SDHCI_QUIRK_PRESET_VALUE_BROKEN                 (1 << 27)
/* Controller does not support or the support for ACMD12 is broken. */
#define SDHCI_QUIRK_BROKEN_AUTO_STOP                    (1 << 28)
/* Controller supports eMMC HS400 mode if SDHCI_CAN_SDR104 is set. */
#define SDHCI_QUIRK_MMC_HS400_IF_CAN_SDR104             (1 << 29)
/* SDMA boundary in SDHCI_BLOCK_SIZE broken - use front-end supplied value. */
#define SDHCI_QUIRK_BROKEN_SDMA_BOUNDARY                (1 << 30)

/*
 * Controller registers
 */
#define SDHCI_DMA_ADDRESS       0x00

#define SDHCI_BLOCK_SIZE        0x04
#define  SDHCI_BLKSZ_SDMA_BNDRY_4K      0x00
#define  SDHCI_BLKSZ_SDMA_BNDRY_8K      0x01
#define  SDHCI_BLKSZ_SDMA_BNDRY_16K     0x02
#define  SDHCI_BLKSZ_SDMA_BNDRY_32K     0x03
#define  SDHCI_BLKSZ_SDMA_BNDRY_64K     0x04
#define  SDHCI_BLKSZ_SDMA_BNDRY_128K    0x05
#define  SDHCI_BLKSZ_SDMA_BNDRY_256K    0x06
#define  SDHCI_BLKSZ_SDMA_BNDRY_512K    0x07
#define  SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF))

#define SDHCI_BLOCK_COUNT       0x06

#define SDHCI_ARGUMENT          0x08

#define SDHCI_TRANSFER_MODE     0x0C
#define  SDHCI_TRNS_DMA         0x01
#define  SDHCI_TRNS_BLK_CNT_EN  0x02
#define  SDHCI_TRNS_ACMD12      0x04
#define  SDHCI_TRNS_READ        0x10
#define  SDHCI_TRNS_MULTI       0x20

#define SDHCI_COMMAND_FLAGS     0x0E
#define  SDHCI_CMD_RESP_NONE    0x00
#define  SDHCI_CMD_RESP_LONG    0x01
#define  SDHCI_CMD_RESP_SHORT   0x02
#define  SDHCI_CMD_RESP_SHORT_BUSY 0x03
#define  SDHCI_CMD_RESP_MASK    0x03
#define  SDHCI_CMD_CRC          0x08
#define  SDHCI_CMD_INDEX        0x10
#define  SDHCI_CMD_DATA         0x20
#define  SDHCI_CMD_TYPE_NORMAL  0x00
#define  SDHCI_CMD_TYPE_SUSPEND 0x40
#define  SDHCI_CMD_TYPE_RESUME  0x80
#define  SDHCI_CMD_TYPE_ABORT   0xc0
#define  SDHCI_CMD_TYPE_MASK    0xc0

#define SDHCI_COMMAND           0x0F

#define SDHCI_RESPONSE          0x10

#define SDHCI_BUFFER            0x20

#define SDHCI_PRESENT_STATE     0x24
#define  SDHCI_CMD_INHIBIT      0x00000001
#define  SDHCI_DAT_INHIBIT      0x00000002
#define  SDHCI_DAT_ACTIVE       0x00000004
#define  SDHCI_RETUNE_REQUEST   0x00000008
#define  SDHCI_DOING_WRITE      0x00000100
#define  SDHCI_DOING_READ       0x00000200
#define  SDHCI_SPACE_AVAILABLE  0x00000400
#define  SDHCI_DATA_AVAILABLE   0x00000800
#define  SDHCI_CARD_PRESENT     0x00010000
#define  SDHCI_CARD_STABLE      0x00020000
#define  SDHCI_CARD_PIN         0x00040000
#define  SDHCI_WRITE_PROTECT    0x00080000
#define  SDHCI_STATE_DAT_MASK   0x00f00000
#define  SDHCI_STATE_CMD        0x01000000

#define SDHCI_HOST_CONTROL      0x28
#define  SDHCI_CTRL_LED         0x01
#define  SDHCI_CTRL_4BITBUS     0x02
#define  SDHCI_CTRL_HISPD       0x04
#define  SDHCI_CTRL_SDMA        0x08
#define  SDHCI_CTRL_ADMA2       0x10
#define  SDHCI_CTRL_ADMA264     0x18
#define  SDHCI_CTRL_DMA_MASK    0x18
#define  SDHCI_CTRL_8BITBUS     0x20
#define  SDHCI_CTRL_CARD_DET    0x40
#define  SDHCI_CTRL_FORCE_CARD  0x80

#define SDHCI_POWER_CONTROL     0x29
#define  SDHCI_POWER_ON         0x01
#define  SDHCI_POWER_180        0x0A
#define  SDHCI_POWER_300        0x0C
#define  SDHCI_POWER_330        0x0E

#define SDHCI_BLOCK_GAP_CONTROL 0x2A

#define SDHCI_WAKE_UP_CONTROL   0x2B

#define SDHCI_CLOCK_CONTROL     0x2C
#define  SDHCI_DIVIDER_MASK     0xff
#define  SDHCI_DIVIDER_MASK_LEN 8
#define  SDHCI_DIVIDER_SHIFT    8
#define  SDHCI_DIVIDER_HI_MASK  3
#define  SDHCI_DIVIDER_HI_SHIFT 6
#define  SDHCI_CLOCK_CARD_EN    0x0004
#define  SDHCI_CLOCK_INT_STABLE 0x0002
#define  SDHCI_CLOCK_INT_EN     0x0001
#define  SDHCI_DIVIDERS_MASK    \
    ((SDHCI_DIVIDER_MASK << SDHCI_DIVIDER_SHIFT) | \
    (SDHCI_DIVIDER_HI_MASK << SDHCI_DIVIDER_HI_SHIFT))

#define SDHCI_TIMEOUT_CONTROL   0x2E

#define SDHCI_SOFTWARE_RESET    0x2F
#define  SDHCI_RESET_ALL        0x01
#define  SDHCI_RESET_CMD        0x02
#define  SDHCI_RESET_DATA       0x04

#define SDHCI_INT_STATUS        0x30
#define SDHCI_INT_ENABLE        0x34
#define SDHCI_SIGNAL_ENABLE     0x38
#define  SDHCI_INT_RESPONSE     0x00000001
#define  SDHCI_INT_DATA_END     0x00000002
#define  SDHCI_INT_BLOCK_GAP    0x00000004
#define  SDHCI_INT_DMA_END      0x00000008
#define  SDHCI_INT_SPACE_AVAIL  0x00000010
#define  SDHCI_INT_DATA_AVAIL   0x00000020
#define  SDHCI_INT_CARD_INSERT  0x00000040
#define  SDHCI_INT_CARD_REMOVE  0x00000080
#define  SDHCI_INT_CARD_INT     0x00000100
#define  SDHCI_INT_INT_A        0x00000200
#define  SDHCI_INT_INT_B        0x00000400
#define  SDHCI_INT_INT_C        0x00000800
#define  SDHCI_INT_RETUNE       0x00001000
#define  SDHCI_INT_ERROR        0x00008000
#define  SDHCI_INT_TIMEOUT      0x00010000
#define  SDHCI_INT_CRC          0x00020000
#define  SDHCI_INT_END_BIT      0x00040000
#define  SDHCI_INT_INDEX        0x00080000
#define  SDHCI_INT_DATA_TIMEOUT 0x00100000
#define  SDHCI_INT_DATA_CRC     0x00200000
#define  SDHCI_INT_DATA_END_BIT 0x00400000
#define  SDHCI_INT_BUS_POWER    0x00800000
#define  SDHCI_INT_ACMD12ERR    0x01000000
#define  SDHCI_INT_ADMAERR      0x02000000
#define  SDHCI_INT_TUNEERR      0x04000000

#define  SDHCI_INT_NORMAL_MASK  0x00007FFF
#define  SDHCI_INT_ERROR_MASK   0xFFFF8000

#define  SDHCI_INT_CMD_ERROR_MASK       (SDHCI_INT_TIMEOUT | \
                SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX)

#define  SDHCI_INT_CMD_MASK     (SDHCI_INT_RESPONSE | SDHCI_INT_CMD_ERROR_MASK)

#define  SDHCI_INT_DATA_MASK    (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
                SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
                SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
                SDHCI_INT_DATA_END_BIT)

#define SDHCI_ACMD12_ERR        0x3C

#define SDHCI_HOST_CONTROL2     0x3E
#define  SDHCI_CTRL2_PRESET_VALUE       0x8000
#define  SDHCI_CTRL2_ASYNC_INTR 0x4000
#define  SDHCI_CTRL2_64BIT_ENABLE       0x2000
#define  SDHCI_CTRL2_HOST_V4_ENABLE     0x1000
#define  SDHCI_CTRL2_CMD23_ENABLE       0x0800
#define  SDHCI_CTRL2_ADMA2_LENGTH_MODE  0x0400
#define  SDHCI_CTRL2_UHS2_IFACE_ENABLE  0x0100
#define  SDHCI_CTRL2_SAMPLING_CLOCK     0x0080
#define  SDHCI_CTRL2_EXEC_TUNING        0x0040
#define  SDHCI_CTRL2_DRIVER_TYPE_MASK   0x0030
#define  SDHCI_CTRL2_DRIVER_TYPE_B      0x0000
#define  SDHCI_CTRL2_DRIVER_TYPE_A      0x0010
#define  SDHCI_CTRL2_DRIVER_TYPE_C      0x0020
#define  SDHCI_CTRL2_DRIVER_TYPE_D      0x0030
#define  SDHCI_CTRL2_S18_ENABLE 0x0008
#define  SDHCI_CTRL2_UHS_MASK   0x0007
#define  SDHCI_CTRL2_UHS_SDR12  0x0000
#define  SDHCI_CTRL2_UHS_SDR25  0x0001
#define  SDHCI_CTRL2_UHS_SDR50  0x0002
#define  SDHCI_CTRL2_UHS_SDR104 0x0003
#define  SDHCI_CTRL2_UHS_DDR50  0x0004
#define  SDHCI_CTRL2_MMC_HS400  0x0005  /* non-standard */

#define SDHCI_CAPABILITIES      0x40
#define  SDHCI_TIMEOUT_CLK_MASK 0x0000003F
#define  SDHCI_TIMEOUT_CLK_SHIFT 0
#define  SDHCI_TIMEOUT_CLK_UNIT 0x00000080
#define  SDHCI_CLOCK_BASE_MASK  0x00003F00
#define  SDHCI_CLOCK_V3_BASE_MASK       0x0000FF00
#define  SDHCI_CLOCK_BASE_SHIFT 8
#define  SDHCI_MAX_BLOCK_MASK   0x00030000
#define  SDHCI_MAX_BLOCK_SHIFT  16
#define  SDHCI_CAN_DO_8BITBUS   0x00040000
#define  SDHCI_CAN_DO_ADMA2     0x00080000
#define  SDHCI_CAN_DO_HISPD     0x00200000
#define  SDHCI_CAN_DO_DMA       0x00400000
#define  SDHCI_CAN_DO_SUSPEND   0x00800000
#define  SDHCI_CAN_VDD_330      0x01000000
#define  SDHCI_CAN_VDD_300      0x02000000
#define  SDHCI_CAN_VDD_180      0x04000000
#define  SDHCI_CAN_DO_64BIT     0x10000000
#define  SDHCI_CAN_ASYNC_INTR   0x20000000
#define  SDHCI_SLOTTYPE_MASK    0xC0000000
#define  SDHCI_SLOTTYPE_REMOVABLE       0x00000000
#define  SDHCI_SLOTTYPE_EMBEDDED        0x40000000
#define  SDHCI_SLOTTYPE_SHARED  0x80000000

#define SDHCI_CAPABILITIES2     0x44
#define  SDHCI_CAN_SDR50        0x00000001
#define  SDHCI_CAN_SDR104       0x00000002
#define  SDHCI_CAN_DDR50        0x00000004
#define  SDHCI_CAN_DRIVE_TYPE_A 0x00000010
#define  SDHCI_CAN_DRIVE_TYPE_C 0x00000020
#define  SDHCI_CAN_DRIVE_TYPE_D 0x00000040
#define  SDHCI_RETUNE_CNT_MASK  0x00000F00
#define  SDHCI_RETUNE_CNT_SHIFT 8
#define  SDHCI_TUNE_SDR50       0x00002000
#define  SDHCI_RETUNE_MODES_MASK  0x0000C000
#define  SDHCI_RETUNE_MODES_SHIFT 14
#define  SDHCI_CLOCK_MULT_MASK  0x00FF0000
#define  SDHCI_CLOCK_MULT_SHIFT 16
#define  SDHCI_CAN_MMC_HS400    0x80000000      /* non-standard */

#define SDHCI_MAX_CURRENT       0x48
#define SDHCI_FORCE_AUTO_EVENT  0x50
#define SDHCI_FORCE_INTR_EVENT  0x52

#define SDHCI_ADMA_ERR          0x54
#define  SDHCI_ADMA_ERR_LENGTH  0x04
#define  SDHCI_ADMA_ERR_STATE_MASK      0x03
#define  SDHCI_ADMA_ERR_STATE_STOP      0x00
#define  SDHCI_ADMA_ERR_STATE_FDS       0x01
#define  SDHCI_ADMA_ERR_STATE_TFR       0x03

#define SDHCI_ADMA_ADDRESS_LO   0x58
#define SDHCI_ADMA_ADDRESS_HI   0x5C

#define SDHCI_PRESET_VALUE      0x60
#define SDHCI_SHARED_BUS_CTRL   0xE0

#define SDHCI_SLOT_INT_STATUS   0xFC

#define SDHCI_HOST_VERSION      0xFE
#define  SDHCI_VENDOR_VER_MASK  0xFF00
#define  SDHCI_VENDOR_VER_SHIFT 8
#define  SDHCI_SPEC_VER_MASK    0x00FF
#define  SDHCI_SPEC_VER_SHIFT   0
#define SDHCI_SPEC_100          0
#define SDHCI_SPEC_200          1
#define SDHCI_SPEC_300          2
#define SDHCI_SPEC_400          3
#define SDHCI_SPEC_410          4
#define SDHCI_SPEC_420          5

SYSCTL_DECL(_hw_sdhci);

extern u_int sdhci_quirk_clear;
extern u_int sdhci_quirk_set;

struct sdhci_slot {
        struct mtx      mtx;            /* Slot mutex */
        u_int           quirks;         /* Chip specific quirks */
        u_int           caps;           /* Override SDHCI_CAPABILITIES */
        u_int           caps2;          /* Override SDHCI_CAPABILITIES2 */
        device_t        bus;            /* Bus device */
        device_t        dev;            /* Slot device */
        u_char          num;            /* Slot number */
        u_char          opt;            /* Slot options */
#define SDHCI_HAVE_DMA                  0x01
#define SDHCI_PLATFORM_TRANSFER         0x02
#define SDHCI_NON_REMOVABLE             0x04
#define SDHCI_TUNING_SUPPORTED          0x08
#define SDHCI_TUNING_ENABLED            0x10
#define SDHCI_SDR50_NEEDS_TUNING        0x20
#define SDHCI_SLOT_EMBEDDED             0x40
        u_char          version;
        int             timeout;        /* Transfer timeout */
        uint32_t        max_clk;        /* Max possible freq */
        uint32_t        timeout_clk;    /* Timeout freq */
        bus_dma_tag_t   dmatag;
        bus_dmamap_t    dmamap;
        u_char          *dmamem;
        bus_addr_t      paddr;          /* DMA buffer address */
        uint32_t        sdma_bbufsz;    /* SDMA bounce buffer size */
        uint8_t         sdma_boundary;  /* SDMA boundary */
        struct task     card_task;      /* Card presence check task */
        struct timeout_task
                        card_delayed_task;/* Card insert delayed task */
        struct callout  card_poll_callout;/* Card present polling callout */
        struct callout  timeout_callout;/* Card command/data response timeout */
        struct callout  retune_callout; /* Re-tuning mode 1 callout */
        struct mmc_host host;           /* Host parameters */
        struct mmc_request *req;        /* Current request */
        struct mmc_command *curcmd;     /* Current command of current request */

        struct mmc_request *tune_req;   /* Tuning request */
        struct mmc_command *tune_cmd;   /* Tuning command of tuning request */
        struct mmc_data *tune_data;     /* Tuning data of tuning command */
        uint32_t        retune_ticks;   /* Re-tuning callout ticks [hz] */
        uint32_t        intmask;        /* Current interrupt mask */
        uint32_t        clock;          /* Current clock freq. */
        size_t          offset;         /* Data buffer offset */
        uint8_t         hostctrl;       /* Current host control register */
        uint8_t         retune_count;   /* Controller re-tuning count [s] */
        uint8_t         retune_mode;    /* Controller re-tuning mode */
#define SDHCI_RETUNE_MODE_1     0x00
#define SDHCI_RETUNE_MODE_2     0x01
#define SDHCI_RETUNE_MODE_3     0x02
        uint8_t         retune_req;     /* Re-tuning request status */
#define SDHCI_RETUNE_REQ_NEEDED 0x01    /* Re-tuning w/o circuit reset needed */
#define SDHCI_RETUNE_REQ_RESET  0x02    /* Re-tuning w/ circuit reset needed */
        u_char          power;          /* Current power */
        u_char          bus_busy;       /* Bus busy status */
        u_char          cmd_done;       /* CMD command part done flag */
        u_char          data_done;      /* DAT command part done flag */
        u_char          flags;          /* Request execution flags */
#define CMD_STARTED             1
#define STOP_STARTED            2
#define SDHCI_USE_DMA           4       /* Use DMA for this req. */
#define PLATFORM_DATA_STARTED   8       /* Data xfer is handled by platform */

#ifdef MMCCAM
        /* CAM stuff */
        union ccb       *ccb;
        struct cam_devq *devq;
        struct cam_sim  *sim;
        struct mtx      sim_mtx;
        u_char          card_present;   /* XXX Maybe derive this from elsewhere? */
#endif
};

int sdhci_generic_read_ivar(device_t bus, device_t child, int which,
    uintptr_t *result);
int sdhci_generic_write_ivar(device_t bus, device_t child, int which,
    uintptr_t value);
int sdhci_init_slot(device_t dev, struct sdhci_slot *slot, int num);
void sdhci_start_slot(struct sdhci_slot *slot);
/* performs generic clean-up for platform transfers */
void sdhci_finish_data(struct sdhci_slot *slot);
int sdhci_cleanup_slot(struct sdhci_slot *slot);
int sdhci_generic_suspend(struct sdhci_slot *slot);
int sdhci_generic_resume(struct sdhci_slot *slot);
void sdhci_generic_reset(device_t brdev, struct sdhci_slot *slot, uint8_t mask);
int sdhci_generic_update_ios(device_t brdev, device_t reqdev);
int sdhci_generic_tune(device_t brdev, device_t reqdev, bool hs400);
int sdhci_generic_switch_vccq(device_t brdev, device_t reqdev);
int sdhci_generic_retune(device_t brdev, device_t reqdev, bool reset);
int sdhci_generic_request(device_t brdev, device_t reqdev,
    struct mmc_request *req);
int sdhci_generic_get_ro(device_t brdev, device_t reqdev);
int sdhci_generic_acquire_host(device_t brdev, device_t reqdev);
int sdhci_generic_release_host(device_t brdev, device_t reqdev);
void sdhci_generic_intr(struct sdhci_slot *slot);
uint32_t sdhci_generic_min_freq(device_t brdev, struct sdhci_slot *slot);
bool sdhci_generic_get_card_present(device_t brdev, struct sdhci_slot *slot);
void sdhci_generic_set_uhs_timing(device_t brdev, struct sdhci_slot *slot);
void sdhci_handle_card_present(struct sdhci_slot *slot, bool is_present);

#define SDHCI_VERSION   2

#define SDHCI_DEPEND(name)                                              \
    MODULE_DEPEND(name, sdhci, SDHCI_VERSION, SDHCI_VERSION, SDHCI_VERSION);

#endif  /* __SDHCI_H__ */