root/sys/dev/drm/amd/display/dc/dce110/dce110_hw_sequencer.c 
/*
 * Copyright 2015 Advanced Micro Devices, Inc.
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice shall be included in
 * all copies or substantial portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
 * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
 * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 * OTHER DEALINGS IN THE SOFTWARE.
 *
 * Authors: AMD
 *
 */
#include "dm_services.h"
#include "dc.h"
#include "dc_bios_types.h"
#include "core_types.h"
#include "core_status.h"
#include "resource.h"
#include "dm_helpers.h"
#include "dce110_hw_sequencer.h"
#include "dce110_timing_generator.h"
#include "dce/dce_hwseq.h"
#include "gpio_service_interface.h"

#include "dce110_compressor.h"

#include "bios/bios_parser_helper.h"
#include "timing_generator.h"
#include "mem_input.h"
#include "opp.h"
#include "ipp.h"
#include "transform.h"
#include "stream_encoder.h"
#include "link_encoder.h"
#include "link_hwss.h"
#include "clock_source.h"
#include "abm.h"
#include "audio.h"
#include "reg_helper.h"

/* include DCE11 register header files */
#include "dce/dce_11_0_d.h"
#include "dce/dce_11_0_sh_mask.h"
#include "custom_float.h"

#include "atomfirmware.h"

/*
 * All values are in milliseconds;
 * For eDP, after power-up/power/down,
 * 300/500 msec max. delay from LCDVCC to black video generation
 */
#define PANEL_POWER_UP_TIMEOUT 300
#define PANEL_POWER_DOWN_TIMEOUT 500
#define HPD_CHECK_INTERVAL 10

#define CTX \
        hws->ctx

#define DC_LOGGER_INIT()

#define REG(reg)\
        hws->regs->reg

#undef FN
#define FN(reg_name, field_name) \
        hws->shifts->field_name, hws->masks->field_name

struct dce110_hw_seq_reg_offsets {
        uint32_t crtc;
};

static const struct dce110_hw_seq_reg_offsets reg_offsets[] = {
{
        .crtc = (mmCRTC0_CRTC_GSL_CONTROL - mmCRTC_GSL_CONTROL),
},
{
        .crtc = (mmCRTC1_CRTC_GSL_CONTROL - mmCRTC_GSL_CONTROL),
},
{
        .crtc = (mmCRTC2_CRTC_GSL_CONTROL - mmCRTC_GSL_CONTROL),
},
{
        .crtc = (mmCRTCV_GSL_CONTROL - mmCRTC_GSL_CONTROL),
}
};

#define HW_REG_BLND(reg, id)\
        (reg + reg_offsets[id].blnd)

#define HW_REG_CRTC(reg, id)\
        (reg + reg_offsets[id].crtc)

#define MAX_WATERMARK 0xFFFF
#define SAFE_NBP_MARK 0x7FFF

/*******************************************************************************
 * Private definitions
 ******************************************************************************/
/***************************PIPE_CONTROL***********************************/
static void dce110_init_pte(struct dc_context *ctx)
{
        uint32_t addr;
        uint32_t value = 0;
        uint32_t chunk_int = 0;
        uint32_t chunk_mul = 0;

        addr = mmUNP_DVMM_PTE_CONTROL;
        value = dm_read_reg(ctx, addr);

        set_reg_field_value(
                value,
                0,
                DVMM_PTE_CONTROL,
                DVMM_USE_SINGLE_PTE);

        set_reg_field_value(
                value,
                1,
                DVMM_PTE_CONTROL,
                DVMM_PTE_BUFFER_MODE0);

        set_reg_field_value(
                value,
                1,
                DVMM_PTE_CONTROL,
                DVMM_PTE_BUFFER_MODE1);

        dm_write_reg(ctx, addr, value);

        addr = mmDVMM_PTE_REQ;
        value = dm_read_reg(ctx, addr);

        chunk_int = get_reg_field_value(
                value,
                DVMM_PTE_REQ,
                HFLIP_PTEREQ_PER_CHUNK_INT);

        chunk_mul = get_reg_field_value(
                value,
                DVMM_PTE_REQ,
                HFLIP_PTEREQ_PER_CHUNK_MULTIPLIER);

        if (chunk_int != 0x4 || chunk_mul != 0x4) {

                set_reg_field_value(
                        value,
                        255,
                        DVMM_PTE_REQ,
                        MAX_PTEREQ_TO_ISSUE);

                set_reg_field_value(
                        value,
                        4,
                        DVMM_PTE_REQ,
                        HFLIP_PTEREQ_PER_CHUNK_INT);

                set_reg_field_value(
                        value,
                        4,
                        DVMM_PTE_REQ,
                        HFLIP_PTEREQ_PER_CHUNK_MULTIPLIER);

                dm_write_reg(ctx, addr, value);
        }
}
/**************************************************************************/

static void enable_display_pipe_clock_gating(
        struct dc_context *ctx,
        bool clock_gating)
{
        /*TODO*/
}

static bool dce110_enable_display_power_gating(
        struct dc *dc,
        uint8_t controller_id,
        struct dc_bios *dcb,
        enum pipe_gating_control power_gating)
{
        enum bp_result bp_result = BP_RESULT_OK;
        enum bp_pipe_control_action cntl;
        struct dc_context *ctx = dc->ctx;
        unsigned int underlay_idx = dc->res_pool->underlay_pipe_index;

        if (IS_FPGA_MAXIMUS_DC(ctx->dce_environment))
                return true;

        if (power_gating == PIPE_GATING_CONTROL_INIT)
                cntl = ASIC_PIPE_INIT;
        else if (power_gating == PIPE_GATING_CONTROL_ENABLE)
                cntl = ASIC_PIPE_ENABLE;
        else
                cntl = ASIC_PIPE_DISABLE;

        if (controller_id == underlay_idx)
                controller_id = CONTROLLER_ID_UNDERLAY0 - 1;

        if (power_gating != PIPE_GATING_CONTROL_INIT || controller_id == 0){

                bp_result = dcb->funcs->enable_disp_power_gating(
                                                dcb, controller_id + 1, cntl);

                /* Revert MASTER_UPDATE_MODE to 0 because bios sets it 2
                 * by default when command table is called
                 *
                 * Bios parser accepts controller_id = 6 as indicative of
                 * underlay pipe in dce110. But we do not support more
                 * than 3.
                 */
                if (controller_id < CONTROLLER_ID_MAX - 1)
                        dm_write_reg(ctx,
                                HW_REG_CRTC(mmCRTC_MASTER_UPDATE_MODE, controller_id),
                                0);
        }

        if (power_gating != PIPE_GATING_CONTROL_ENABLE)
                dce110_init_pte(ctx);

        if (bp_result == BP_RESULT_OK)
                return true;
        else
                return false;
}

static void build_prescale_params(struct ipp_prescale_params *prescale_params,
                const struct dc_plane_state *plane_state)
{
        prescale_params->mode = IPP_PRESCALE_MODE_FIXED_UNSIGNED;

        switch (plane_state->format) {
        case SURFACE_PIXEL_FORMAT_GRPH_RGB565:
                prescale_params->scale = 0x2082;
                break;
        case SURFACE_PIXEL_FORMAT_GRPH_ARGB8888:
        case SURFACE_PIXEL_FORMAT_GRPH_ABGR8888:
                prescale_params->scale = 0x2020;
                break;
        case SURFACE_PIXEL_FORMAT_GRPH_ARGB2101010:
        case SURFACE_PIXEL_FORMAT_GRPH_ABGR2101010:
                prescale_params->scale = 0x2008;
                break;
        case SURFACE_PIXEL_FORMAT_GRPH_ARGB16161616:
        case SURFACE_PIXEL_FORMAT_GRPH_ABGR16161616F:
                prescale_params->scale = 0x2000;
                break;
        default:
                ASSERT(false);
                break;
        }
}

static bool
dce110_set_input_transfer_func(struct pipe_ctx *pipe_ctx,
                               const struct dc_plane_state *plane_state)
{
        struct input_pixel_processor *ipp = pipe_ctx->plane_res.ipp;
        const struct dc_transfer_func *tf = NULL;
        struct ipp_prescale_params prescale_params = { 0 };
        bool result = true;

        if (ipp == NULL)
                return false;

        if (plane_state->in_transfer_func)
                tf = plane_state->in_transfer_func;

        build_prescale_params(&prescale_params, plane_state);
        ipp->funcs->ipp_program_prescale(ipp, &prescale_params);

        if (plane_state->gamma_correction &&
                        !plane_state->gamma_correction->is_identity &&
                        dce_use_lut(plane_state->format))
                ipp->funcs->ipp_program_input_lut(ipp, plane_state->gamma_correction);

        if (tf == NULL) {
                /* Default case if no input transfer function specified */
                ipp->funcs->ipp_set_degamma(ipp, IPP_DEGAMMA_MODE_HW_sRGB);
        } else if (tf->type == TF_TYPE_PREDEFINED) {
                switch (tf->tf) {
                case TRANSFER_FUNCTION_SRGB:
                        ipp->funcs->ipp_set_degamma(ipp, IPP_DEGAMMA_MODE_HW_sRGB);
                        break;
                case TRANSFER_FUNCTION_BT709:
                        ipp->funcs->ipp_set_degamma(ipp, IPP_DEGAMMA_MODE_HW_xvYCC);
                        break;
                case TRANSFER_FUNCTION_LINEAR:
                        ipp->funcs->ipp_set_degamma(ipp, IPP_DEGAMMA_MODE_BYPASS);
                        break;
                case TRANSFER_FUNCTION_PQ:
                default:
                        result = false;
                        break;
                }
        } else if (tf->type == TF_TYPE_BYPASS) {
                ipp->funcs->ipp_set_degamma(ipp, IPP_DEGAMMA_MODE_BYPASS);
        } else {
                /*TF_TYPE_DISTRIBUTED_POINTS - Not supported in DCE 11*/
                result = false;
        }

        return result;
}

static bool convert_to_custom_float(struct pwl_result_data *rgb_resulted,
                                    struct curve_points *arr_points,
                                    uint32_t hw_points_num)
{
        struct custom_float_format fmt;

        struct pwl_result_data *rgb = rgb_resulted;

        uint32_t i = 0;

        fmt.exponenta_bits = 6;
        fmt.mantissa_bits = 12;
        fmt.sign = true;

        if (!convert_to_custom_float_format(arr_points[0].x, &fmt,
                                            &arr_points[0].custom_float_x)) {
                BREAK_TO_DEBUGGER();
                return false;
        }

        if (!convert_to_custom_float_format(arr_points[0].offset, &fmt,
                                            &arr_points[0].custom_float_offset)) {
                BREAK_TO_DEBUGGER();
                return false;
        }

        if (!convert_to_custom_float_format(arr_points[0].slope, &fmt,
                                            &arr_points[0].custom_float_slope)) {
                BREAK_TO_DEBUGGER();
                return false;
        }

        fmt.mantissa_bits = 10;
        fmt.sign = false;

        if (!convert_to_custom_float_format(arr_points[1].x, &fmt,
                                            &arr_points[1].custom_float_x)) {
                BREAK_TO_DEBUGGER();
                return false;
        }

        if (!convert_to_custom_float_format(arr_points[1].y, &fmt,
                                            &arr_points[1].custom_float_y)) {
                BREAK_TO_DEBUGGER();
                return false;
        }

        if (!convert_to_custom_float_format(arr_points[1].slope, &fmt,
                                            &arr_points[1].custom_float_slope)) {
                BREAK_TO_DEBUGGER();
                return false;
        }

        fmt.mantissa_bits = 12;
        fmt.sign = true;

        while (i != hw_points_num) {
                if (!convert_to_custom_float_format(rgb->red, &fmt,
                                                    &rgb->red_reg)) {
                        BREAK_TO_DEBUGGER();
                        return false;
                }

                if (!convert_to_custom_float_format(rgb->green, &fmt,
                                                    &rgb->green_reg)) {
                        BREAK_TO_DEBUGGER();
                        return false;
                }

                if (!convert_to_custom_float_format(rgb->blue, &fmt,
                                                    &rgb->blue_reg)) {
                        BREAK_TO_DEBUGGER();
                        return false;
                }

                if (!convert_to_custom_float_format(rgb->delta_red, &fmt,
                                                    &rgb->delta_red_reg)) {
                        BREAK_TO_DEBUGGER();
                        return false;
                }

                if (!convert_to_custom_float_format(rgb->delta_green, &fmt,
                                                    &rgb->delta_green_reg)) {
                        BREAK_TO_DEBUGGER();
                        return false;
                }

                if (!convert_to_custom_float_format(rgb->delta_blue, &fmt,
                                                    &rgb->delta_blue_reg)) {
                        BREAK_TO_DEBUGGER();
                        return false;
                }

                ++rgb;
                ++i;
        }

        return true;
}

#define MAX_LOW_POINT      25
#define NUMBER_REGIONS     16
#define NUMBER_SW_SEGMENTS 16

static bool
dce110_translate_regamma_to_hw_format(const struct dc_transfer_func *output_tf,
                                      struct pwl_params *regamma_params)
{
        struct curve_points *arr_points;
        struct pwl_result_data *rgb_resulted;
        struct pwl_result_data *rgb;
        struct pwl_result_data *rgb_plus_1;
        struct fixed31_32 y_r;
        struct fixed31_32 y_g;
        struct fixed31_32 y_b;
        struct fixed31_32 y1_min;
        struct fixed31_32 y3_max;

        int32_t region_start, region_end;
        uint32_t i, j, k, seg_distr[NUMBER_REGIONS], increment, start_index, hw_points;

        if (output_tf == NULL || regamma_params == NULL || output_tf->type == TF_TYPE_BYPASS)
                return false;

        arr_points = regamma_params->arr_points;
        rgb_resulted = regamma_params->rgb_resulted;
        hw_points = 0;

        memset(regamma_params, 0, sizeof(struct pwl_params));

        if (output_tf->tf == TRANSFER_FUNCTION_PQ) {
                /* 16 segments
                 * segments are from 2^-11 to 2^5
                 */
                region_start = -11;
                region_end = region_start + NUMBER_REGIONS;

                for (i = 0; i < NUMBER_REGIONS; i++)
                        seg_distr[i] = 4;

        } else {
                /* 10 segments
                 * segment is from 2^-10 to 2^1
                 * We include an extra segment for range [2^0, 2^1). This is to
                 * ensure that colors with normalized values of 1 don't miss the
                 * LUT.
                 */
                region_start = -10;
                region_end = 1;

                seg_distr[0] = 4;
                seg_distr[1] = 4;
                seg_distr[2] = 4;
                seg_distr[3] = 4;
                seg_distr[4] = 4;
                seg_distr[5] = 4;
                seg_distr[6] = 4;
                seg_distr[7] = 4;
                seg_distr[8] = 4;
                seg_distr[9] = 4;
                seg_distr[10] = 0;
                seg_distr[11] = -1;
                seg_distr[12] = -1;
                seg_distr[13] = -1;
                seg_distr[14] = -1;
                seg_distr[15] = -1;
        }

        for (k = 0; k < 16; k++) {
                if (seg_distr[k] != -1)
                        hw_points += (1 << seg_distr[k]);
        }

        j = 0;
        for (k = 0; k < (region_end - region_start); k++) {
                increment = NUMBER_SW_SEGMENTS / (1 << seg_distr[k]);
                start_index = (region_start + k + MAX_LOW_POINT) *
                                NUMBER_SW_SEGMENTS;
                for (i = start_index; i < start_index + NUMBER_SW_SEGMENTS;
                                i += increment) {
                        if (j == hw_points - 1)
                                break;
                        rgb_resulted[j].red = output_tf->tf_pts.red[i];
                        rgb_resulted[j].green = output_tf->tf_pts.green[i];
                        rgb_resulted[j].blue = output_tf->tf_pts.blue[i];
                        j++;
                }
        }

        /* last point */
        start_index = (region_end + MAX_LOW_POINT) * NUMBER_SW_SEGMENTS;
        rgb_resulted[hw_points - 1].red = output_tf->tf_pts.red[start_index];
        rgb_resulted[hw_points - 1].green = output_tf->tf_pts.green[start_index];
        rgb_resulted[hw_points - 1].blue = output_tf->tf_pts.blue[start_index];

        arr_points[0].x = dc_fixpt_pow(dc_fixpt_from_int(2),
                                             dc_fixpt_from_int(region_start));
        arr_points[1].x = dc_fixpt_pow(dc_fixpt_from_int(2),
                                             dc_fixpt_from_int(region_end));

        y_r = rgb_resulted[0].red;
        y_g = rgb_resulted[0].green;
        y_b = rgb_resulted[0].blue;

        y1_min = dc_fixpt_min(y_r, dc_fixpt_min(y_g, y_b));

        arr_points[0].y = y1_min;
        arr_points[0].slope = dc_fixpt_div(arr_points[0].y,
                                                 arr_points[0].x);

        y_r = rgb_resulted[hw_points - 1].red;
        y_g = rgb_resulted[hw_points - 1].green;
        y_b = rgb_resulted[hw_points - 1].blue;

        /* see comment above, m_arrPoints[1].y should be the Y value for the
         * region end (m_numOfHwPoints), not last HW point(m_numOfHwPoints - 1)
         */
        y3_max = dc_fixpt_max(y_r, dc_fixpt_max(y_g, y_b));

        arr_points[1].y = y3_max;

        arr_points[1].slope = dc_fixpt_zero;

        if (output_tf->tf == TRANSFER_FUNCTION_PQ) {
                /* for PQ, we want to have a straight line from last HW X point,
                 * and the slope to be such that we hit 1.0 at 10000 nits.
                 */
                const struct fixed31_32 end_value = dc_fixpt_from_int(125);

                arr_points[1].slope = dc_fixpt_div(
                                dc_fixpt_sub(dc_fixpt_one, arr_points[1].y),
                                dc_fixpt_sub(end_value, arr_points[1].x));
        }

        regamma_params->hw_points_num = hw_points;

        i = 1;
        for (k = 0; k < 16 && i < 16; k++) {
                if (seg_distr[k] != -1) {
                        regamma_params->arr_curve_points[k].segments_num = seg_distr[k];
                        regamma_params->arr_curve_points[i].offset =
                                        regamma_params->arr_curve_points[k].offset + (1 << seg_distr[k]);
                }
                i++;
        }

        if (seg_distr[k] != -1)
                regamma_params->arr_curve_points[k].segments_num = seg_distr[k];

        rgb = rgb_resulted;
        rgb_plus_1 = rgb_resulted + 1;

        i = 1;

        while (i != hw_points + 1) {
                if (dc_fixpt_lt(rgb_plus_1->red, rgb->red))
                        rgb_plus_1->red = rgb->red;
                if (dc_fixpt_lt(rgb_plus_1->green, rgb->green))
                        rgb_plus_1->green = rgb->green;
                if (dc_fixpt_lt(rgb_plus_1->blue, rgb->blue))
                        rgb_plus_1->blue = rgb->blue;

                rgb->delta_red = dc_fixpt_sub(rgb_plus_1->red, rgb->red);
                rgb->delta_green = dc_fixpt_sub(rgb_plus_1->green, rgb->green);
                rgb->delta_blue = dc_fixpt_sub(rgb_plus_1->blue, rgb->blue);

                ++rgb_plus_1;
                ++rgb;
                ++i;
        }

        convert_to_custom_float(rgb_resulted, arr_points, hw_points);

        return true;
}

static bool
dce110_set_output_transfer_func(struct pipe_ctx *pipe_ctx,
                                const struct dc_stream_state *stream)
{
        struct transform *xfm = pipe_ctx->plane_res.xfm;

        xfm->funcs->opp_power_on_regamma_lut(xfm, true);
        xfm->regamma_params.hw_points_num = GAMMA_HW_POINTS_NUM;

        if (stream->out_transfer_func &&
            stream->out_transfer_func->type == TF_TYPE_PREDEFINED &&
            stream->out_transfer_func->tf == TRANSFER_FUNCTION_SRGB) {
                xfm->funcs->opp_set_regamma_mode(xfm, OPP_REGAMMA_SRGB);
        } else if (dce110_translate_regamma_to_hw_format(stream->out_transfer_func,
                                                         &xfm->regamma_params)) {
                xfm->funcs->opp_program_regamma_pwl(xfm, &xfm->regamma_params);
                xfm->funcs->opp_set_regamma_mode(xfm, OPP_REGAMMA_USER);
        } else {
                xfm->funcs->opp_set_regamma_mode(xfm, OPP_REGAMMA_BYPASS);
        }

        xfm->funcs->opp_power_on_regamma_lut(xfm, false);

        return true;
}

static enum dc_status bios_parser_crtc_source_select(
                struct pipe_ctx *pipe_ctx)
{
        struct dc_bios *dcb;
        /* call VBIOS table to set CRTC source for the HW
         * encoder block
         * note: video bios clears all FMT setting here. */
        struct bp_crtc_source_select crtc_source_select = {0};
        const struct dc_sink *sink = pipe_ctx->stream->sink;

        crtc_source_select.engine_id = pipe_ctx->stream_res.stream_enc->id;
        crtc_source_select.controller_id = pipe_ctx->stream_res.tg->inst + 1;
        /*TODO: Need to un-hardcode color depth, dp_audio and account for
         * the case where signal and sink signal is different (translator
         * encoder)*/
        crtc_source_select.signal = pipe_ctx->stream->signal;
        crtc_source_select.enable_dp_audio = false;
        crtc_source_select.sink_signal = pipe_ctx->stream->signal;

        switch (pipe_ctx->stream->timing.display_color_depth) {
        case COLOR_DEPTH_666:
                crtc_source_select.display_output_bit_depth = PANEL_6BIT_COLOR;
                break;
        case COLOR_DEPTH_888:
                crtc_source_select.display_output_bit_depth = PANEL_8BIT_COLOR;
                break;
        case COLOR_DEPTH_101010:
                crtc_source_select.display_output_bit_depth = PANEL_10BIT_COLOR;
                break;
        case COLOR_DEPTH_121212:
                crtc_source_select.display_output_bit_depth = PANEL_12BIT_COLOR;
                break;
        default:
                BREAK_TO_DEBUGGER();
                crtc_source_select.display_output_bit_depth = PANEL_8BIT_COLOR;
                break;
        }

        dcb = sink->ctx->dc_bios;

        if (BP_RESULT_OK != dcb->funcs->crtc_source_select(
                dcb,
                &crtc_source_select)) {
                return DC_ERROR_UNEXPECTED;
        }

        return DC_OK;
}

void dce110_update_info_frame(struct pipe_ctx *pipe_ctx)
{
        bool is_hdmi;
        bool is_dp;

        ASSERT(pipe_ctx->stream);

        if (pipe_ctx->stream_res.stream_enc == NULL)
                return;  /* this is not root pipe */

        is_hdmi = dc_is_hdmi_signal(pipe_ctx->stream->signal);
        is_dp = dc_is_dp_signal(pipe_ctx->stream->signal);

        if (!is_hdmi && !is_dp)
                return;

        if (is_hdmi)
                pipe_ctx->stream_res.stream_enc->funcs->update_hdmi_info_packets(
                        pipe_ctx->stream_res.stream_enc,
                        &pipe_ctx->stream_res.encoder_info_frame);
        else
                pipe_ctx->stream_res.stream_enc->funcs->update_dp_info_packets(
                        pipe_ctx->stream_res.stream_enc,
                        &pipe_ctx->stream_res.encoder_info_frame);
}

void dce110_enable_stream(struct pipe_ctx *pipe_ctx)
{
        enum dc_lane_count lane_count =
                pipe_ctx->stream->sink->link->cur_link_settings.lane_count;

        struct dc_crtc_timing *timing = &pipe_ctx->stream->timing;
        struct dc_link *link = pipe_ctx->stream->sink->link;


        uint32_t active_total_with_borders;
        uint32_t early_control = 0;
        struct timing_generator *tg = pipe_ctx->stream_res.tg;

        /* For MST, there are multiply stream go to only one link.
         * connect DIG back_end to front_end while enable_stream and
         * disconnect them during disable_stream
         * BY this, it is logic clean to separate stream and link */
        link->link_enc->funcs->connect_dig_be_to_fe(link->link_enc,
                                                    pipe_ctx->stream_res.stream_enc->id, true);

        /* update AVI info frame (HDMI, DP)*/
        /* TODO: FPGA may change to hwss.update_info_frame */
        dce110_update_info_frame(pipe_ctx);

        /* enable early control to avoid corruption on DP monitor*/
        active_total_with_borders =
                        timing->h_addressable
                                + timing->h_border_left
                                + timing->h_border_right;

        if (lane_count != 0)
                early_control = active_total_with_borders % lane_count;

        if (early_control == 0)
                early_control = lane_count;

        tg->funcs->set_early_control(tg, early_control);

        /* enable audio only within mode set */
        if (pipe_ctx->stream_res.audio != NULL) {
                if (dc_is_dp_signal(pipe_ctx->stream->signal))
                        pipe_ctx->stream_res.stream_enc->funcs->dp_audio_enable(pipe_ctx->stream_res.stream_enc);
        }




}

/*todo: cloned in stream enc, fix*/
static bool is_panel_backlight_on(struct dce_hwseq *hws)
{
        uint32_t value;

        REG_GET(LVTMA_PWRSEQ_CNTL, LVTMA_BLON, &value);

        return value;
}

static bool is_panel_powered_on(struct dce_hwseq *hws)
{
        uint32_t pwr_seq_state, dig_on, dig_on_ovrd;


        REG_GET(LVTMA_PWRSEQ_STATE, LVTMA_PWRSEQ_TARGET_STATE_R, &pwr_seq_state);

        REG_GET_2(LVTMA_PWRSEQ_CNTL, LVTMA_DIGON, &dig_on, LVTMA_DIGON_OVRD, &dig_on_ovrd);

        return (pwr_seq_state == 1) || (dig_on == 1 && dig_on_ovrd == 1);
}

static enum bp_result link_transmitter_control(
                struct dc_bios *bios,
        struct bp_transmitter_control *cntl)
{
        enum bp_result result;

        result = bios->funcs->transmitter_control(bios, cntl);

        return result;
}

/*
 * @brief
 * eDP only.
 */
void hwss_edp_wait_for_hpd_ready(
                struct dc_link *link,
                bool power_up)
{
        struct dc_context *ctx = link->ctx;
        struct graphics_object_id connector = link->link_enc->connector;
        struct gpio *hpd;
        bool edp_hpd_high = false;
        uint32_t time_elapsed = 0;
        uint32_t timeout = power_up ?
                PANEL_POWER_UP_TIMEOUT : PANEL_POWER_DOWN_TIMEOUT;

        if (dal_graphics_object_id_get_connector_id(connector)
                        != CONNECTOR_ID_EDP) {
                BREAK_TO_DEBUGGER();
                return;
        }

        if (!power_up)
                /*
                 * From KV, we will not HPD low after turning off VCC -
                 * instead, we will check the SW timer in power_up().
                 */
                return;

        /*
         * When we power on/off the eDP panel,
         * we need to wait until SENSE bit is high/low.
         */

        /* obtain HPD */
        /* TODO what to do with this? */
        hpd = get_hpd_gpio(ctx->dc_bios, connector, ctx->gpio_service);

        if (!hpd) {
                BREAK_TO_DEBUGGER();
                return;
        }

        dal_gpio_open(hpd, GPIO_MODE_INTERRUPT);

        /* wait until timeout or panel detected */

        do {
                uint32_t detected = 0;

                dal_gpio_get_value(hpd, &detected);

                if (!(detected ^ power_up)) {
                        edp_hpd_high = true;
                        break;
                }

                msleep(HPD_CHECK_INTERVAL);

                time_elapsed += HPD_CHECK_INTERVAL;
        } while (time_elapsed < timeout);

        dal_gpio_close(hpd);

        dal_gpio_destroy_irq(&hpd);

        if (false == edp_hpd_high) {
                DC_LOG_ERROR(
                                "%s: wait timed out!\n", __func__);
        }
}

void hwss_edp_power_control(
                struct dc_link *link,
                bool power_up)
{
        struct dc_context *ctx = link->ctx;
        struct dce_hwseq *hwseq = ctx->dc->hwseq;
        struct bp_transmitter_control cntl = { 0 };
        enum bp_result bp_result;


        if (dal_graphics_object_id_get_connector_id(link->link_enc->connector)
                        != CONNECTOR_ID_EDP) {
                BREAK_TO_DEBUGGER();
                return;
        }

        if (power_up != is_panel_powered_on(hwseq)) {
                /* Send VBIOS command to prompt eDP panel power */
                if (power_up) {
                        unsigned long long current_ts = dm_get_timestamp(ctx);
                        unsigned long long duration_in_ms =
                                        div64_u64(dm_get_elapse_time_in_ns(
                                                        ctx,
                                                        current_ts,
                                                        link->link_trace.time_stamp.edp_poweroff), 1000000);
                        unsigned long long wait_time_ms = 0;

                        /* max 500ms from LCDVDD off to on */
                        unsigned long long edp_poweroff_time_ms = 500;

                        if (link->local_sink != NULL)
                                edp_poweroff_time_ms =
                                                500 + link->local_sink->edid_caps.panel_patch.extra_t12_ms;
                        if (link->link_trace.time_stamp.edp_poweroff == 0)
                                wait_time_ms = edp_poweroff_time_ms;
                        else if (duration_in_ms < edp_poweroff_time_ms)
                                wait_time_ms = edp_poweroff_time_ms - duration_in_ms;

                        if (wait_time_ms) {
                                msleep(wait_time_ms);
                                dm_output_to_console("%s: wait %lld ms to power on eDP.\n",
                                                __func__, wait_time_ms);
                        }

                }

                DC_LOG_HW_RESUME_S3(
                                "%s: Panel Power action: %s\n",
                                __func__, (power_up ? "On":"Off"));

                cntl.action = power_up ?
                        TRANSMITTER_CONTROL_POWER_ON :
                        TRANSMITTER_CONTROL_POWER_OFF;
                cntl.transmitter = link->link_enc->transmitter;
                cntl.connector_obj_id = link->link_enc->connector;
                cntl.coherent = false;
                cntl.lanes_number = LANE_COUNT_FOUR;
                cntl.hpd_sel = link->link_enc->hpd_source;
                bp_result = link_transmitter_control(ctx->dc_bios, &cntl);

                if (!power_up)
                        /*save driver power off time stamp*/
                        link->link_trace.time_stamp.edp_poweroff = dm_get_timestamp(ctx);
                else
                        link->link_trace.time_stamp.edp_poweron = dm_get_timestamp(ctx);

                if (bp_result != BP_RESULT_OK)
                        DC_LOG_ERROR(
                                        "%s: Panel Power bp_result: %d\n",
                                        __func__, bp_result);
        } else {
                DC_LOG_HW_RESUME_S3(
                                "%s: Skipping Panel Power action: %s\n",
                                __func__, (power_up ? "On":"Off"));
        }
}

/*todo: cloned in stream enc, fix*/
/*
 * @brief
 * eDP only. Control the backlight of the eDP panel
 */
void hwss_edp_backlight_control(
                struct dc_link *link,
                bool enable)
{
        struct dc_context *ctx = link->ctx;
        struct dce_hwseq *hws = ctx->dc->hwseq;
        struct bp_transmitter_control cntl = { 0 };

        if (dal_graphics_object_id_get_connector_id(link->link_enc->connector)
                != CONNECTOR_ID_EDP) {
                BREAK_TO_DEBUGGER();
                return;
        }

        if (enable && is_panel_backlight_on(hws)) {
                DC_LOG_HW_RESUME_S3(
                                "%s: panel already powered up. Do nothing.\n",
                                __func__);
                return;
        }

        /* Send VBIOS command to control eDP panel backlight */

        DC_LOG_HW_RESUME_S3(
                        "%s: backlight action: %s\n",
                        __func__, (enable ? "On":"Off"));

        cntl.action = enable ?
                TRANSMITTER_CONTROL_BACKLIGHT_ON :
                TRANSMITTER_CONTROL_BACKLIGHT_OFF;

        /*cntl.engine_id = ctx->engine;*/
        cntl.transmitter = link->link_enc->transmitter;
        cntl.connector_obj_id = link->link_enc->connector;
        /*todo: unhardcode*/
        cntl.lanes_number = LANE_COUNT_FOUR;
        cntl.hpd_sel = link->link_enc->hpd_source;
        cntl.signal = SIGNAL_TYPE_EDP;

        /* For eDP, the following delays might need to be considered
         * after link training completed:
         * idle period - min. accounts for required BS-Idle pattern,
         * max. allows for source frame synchronization);
         * 50 msec max. delay from valid video data from source
         * to video on dislpay or backlight enable.
         *
         * Disable the delay for now.
         * Enable it in the future if necessary.
         */
        /* dc_service_sleep_in_milliseconds(50); */
                /*edp 1.2*/
        if (cntl.action == TRANSMITTER_CONTROL_BACKLIGHT_ON)
                edp_receiver_ready_T7(link);
        link_transmitter_control(ctx->dc_bios, &cntl);
        /*edp 1.2*/
        if (cntl.action == TRANSMITTER_CONTROL_BACKLIGHT_OFF)
                edp_receiver_ready_T9(link);
}

void dce110_enable_audio_stream(struct pipe_ctx *pipe_ctx)
{
        struct dc *core_dc = pipe_ctx->stream->ctx->dc;
        /* notify audio driver for audio modes of monitor */
        struct pp_smu_funcs_rv *pp_smu = core_dc->res_pool->pp_smu;
        unsigned int i, num_audio = 1;

        if (pipe_ctx->stream_res.audio) {
                for (i = 0; i < MAX_PIPES; i++) {
                        /*current_state not updated yet*/
                        if (core_dc->current_state->res_ctx.pipe_ctx[i].stream_res.audio != NULL)
                                num_audio++;
                }

                pipe_ctx->stream_res.audio->funcs->az_enable(pipe_ctx->stream_res.audio);

                if (num_audio >= 1 && pp_smu != NULL && pp_smu->set_pme_wa_enable != NULL)
                        /*this is the first audio. apply the PME w/a in order to wake AZ from D3*/
                        pp_smu->set_pme_wa_enable(&pp_smu->pp_smu);
                /* un-mute audio */
                /* TODO: audio should be per stream rather than per link */
                pipe_ctx->stream_res.stream_enc->funcs->audio_mute_control(
                        pipe_ctx->stream_res.stream_enc, false);
        }
}

void dce110_disable_audio_stream(struct pipe_ctx *pipe_ctx, int option)
{
        struct dc *dc = pipe_ctx->stream->ctx->dc;

        pipe_ctx->stream_res.stream_enc->funcs->audio_mute_control(
                        pipe_ctx->stream_res.stream_enc, true);
        if (pipe_ctx->stream_res.audio) {
                struct pp_smu_funcs_rv *pp_smu = dc->res_pool->pp_smu;

                if (option != KEEP_ACQUIRED_RESOURCE ||
                                !dc->debug.az_endpoint_mute_only) {
                        /*only disalbe az_endpoint if power down or free*/
                        pipe_ctx->stream_res.audio->funcs->az_disable(pipe_ctx->stream_res.audio);
                }

                if (dc_is_dp_signal(pipe_ctx->stream->signal))
                        pipe_ctx->stream_res.stream_enc->funcs->dp_audio_disable(
                                        pipe_ctx->stream_res.stream_enc);
                else
                        pipe_ctx->stream_res.stream_enc->funcs->hdmi_audio_disable(
                                        pipe_ctx->stream_res.stream_enc);
                /*don't free audio if it is from retrain or internal disable stream*/
                if (option == FREE_ACQUIRED_RESOURCE && dc->caps.dynamic_audio == true) {
                        /*we have to dynamic arbitrate the audio endpoints*/
                        /*we free the resource, need reset is_audio_acquired*/
                        update_audio_usage(&dc->current_state->res_ctx, dc->res_pool, pipe_ctx->stream_res.audio, false);
                        pipe_ctx->stream_res.audio = NULL;
                }
                if (pp_smu != NULL && pp_smu->set_pme_wa_enable != NULL)
                        /*this is the first audio. apply the PME w/a in order to wake AZ from D3*/
                        pp_smu->set_pme_wa_enable(&pp_smu->pp_smu);

                /* TODO: notify audio driver for if audio modes list changed
                 * add audio mode list change flag */
                /* dal_audio_disable_azalia_audio_jack_presence(stream->audio,
                 * stream->stream_engine_id);
                 */
        }
}

void dce110_disable_stream(struct pipe_ctx *pipe_ctx, int option)
{
        struct dc_stream_state *stream = pipe_ctx->stream;
        struct dc_link *link = stream->sink->link;
        struct dc *dc = pipe_ctx->stream->ctx->dc;

        if (dc_is_hdmi_signal(pipe_ctx->stream->signal))
                pipe_ctx->stream_res.stream_enc->funcs->stop_hdmi_info_packets(
                        pipe_ctx->stream_res.stream_enc);

        if (dc_is_dp_signal(pipe_ctx->stream->signal))
                pipe_ctx->stream_res.stream_enc->funcs->stop_dp_info_packets(
                        pipe_ctx->stream_res.stream_enc);

        dc->hwss.disable_audio_stream(pipe_ctx, option);

        link->link_enc->funcs->connect_dig_be_to_fe(
                        link->link_enc,
                        pipe_ctx->stream_res.stream_enc->id,
                        false);

}

void dce110_unblank_stream(struct pipe_ctx *pipe_ctx,
                struct dc_link_settings *link_settings)
{
        struct encoder_unblank_param params = { { 0 } };
        struct dc_stream_state *stream = pipe_ctx->stream;
        struct dc_link *link = stream->sink->link;

        /* only 3 items below are used by unblank */
        params.pixel_clk_khz =
                pipe_ctx->stream->timing.pix_clk_khz;
        params.link_settings.link_rate = link_settings->link_rate;

        if (dc_is_dp_signal(pipe_ctx->stream->signal))
                pipe_ctx->stream_res.stream_enc->funcs->dp_unblank(pipe_ctx->stream_res.stream_enc, &params);

        if (link->local_sink && link->local_sink->sink_signal == SIGNAL_TYPE_EDP) {
                link->dc->hwss.edp_backlight_control(link, true);
                stream->bl_pwm_level = EDP_BACKLIGHT_RAMP_DISABLE_LEVEL;
        }
}
void dce110_blank_stream(struct pipe_ctx *pipe_ctx)
{
        struct dc_stream_state *stream = pipe_ctx->stream;
        struct dc_link *link = stream->sink->link;

        if (link->local_sink && link->local_sink->sink_signal == SIGNAL_TYPE_EDP) {
                link->dc->hwss.edp_backlight_control(link, false);
                dc_link_set_abm_disable(link);
        }

        if (dc_is_dp_signal(pipe_ctx->stream->signal))
                pipe_ctx->stream_res.stream_enc->funcs->dp_blank(pipe_ctx->stream_res.stream_enc);
}


void dce110_set_avmute(struct pipe_ctx *pipe_ctx, bool enable)
{
        if (pipe_ctx != NULL && pipe_ctx->stream_res.stream_enc != NULL)
                pipe_ctx->stream_res.stream_enc->funcs->set_avmute(pipe_ctx->stream_res.stream_enc, enable);
}

static enum audio_dto_source translate_to_dto_source(enum controller_id crtc_id)
{
        switch (crtc_id) {
        case CONTROLLER_ID_D0:
                return DTO_SOURCE_ID0;
        case CONTROLLER_ID_D1:
                return DTO_SOURCE_ID1;
        case CONTROLLER_ID_D2:
                return DTO_SOURCE_ID2;
        case CONTROLLER_ID_D3:
                return DTO_SOURCE_ID3;
        case CONTROLLER_ID_D4:
                return DTO_SOURCE_ID4;
        case CONTROLLER_ID_D5:
                return DTO_SOURCE_ID5;
        default:
                return DTO_SOURCE_UNKNOWN;
        }
}

static void build_audio_output(
        struct dc_state *state,
        const struct pipe_ctx *pipe_ctx,
        struct audio_output *audio_output)
{
        const struct dc_stream_state *stream = pipe_ctx->stream;
        audio_output->engine_id = pipe_ctx->stream_res.stream_enc->id;

        audio_output->signal = pipe_ctx->stream->signal;

        /* audio_crtc_info  */

        audio_output->crtc_info.h_total =
                stream->timing.h_total;

        /*
         * Audio packets are sent during actual CRTC blank physical signal, we
         * need to specify actual active signal portion
         */
        audio_output->crtc_info.h_active =
                        stream->timing.h_addressable
                        + stream->timing.h_border_left
                        + stream->timing.h_border_right;

        audio_output->crtc_info.v_active =
                        stream->timing.v_addressable
                        + stream->timing.v_border_top
                        + stream->timing.v_border_bottom;

        audio_output->crtc_info.pixel_repetition = 1;

        audio_output->crtc_info.interlaced =
                        stream->timing.flags.INTERLACE;

        audio_output->crtc_info.refresh_rate =
                (stream->timing.pix_clk_khz*1000)/
                (stream->timing.h_total*stream->timing.v_total);

        audio_output->crtc_info.color_depth =
                stream->timing.display_color_depth;

        audio_output->crtc_info.requested_pixel_clock =
                        pipe_ctx->stream_res.pix_clk_params.requested_pix_clk;

        audio_output->crtc_info.calculated_pixel_clock =
                        pipe_ctx->stream_res.pix_clk_params.requested_pix_clk;

/*for HDMI, audio ACR is with deep color ratio factor*/
        if (dc_is_hdmi_signal(pipe_ctx->stream->signal) &&
                audio_output->crtc_info.requested_pixel_clock ==
                                stream->timing.pix_clk_khz) {
                if (pipe_ctx->stream_res.pix_clk_params.pixel_encoding == PIXEL_ENCODING_YCBCR420) {
                        audio_output->crtc_info.requested_pixel_clock =
                                        audio_output->crtc_info.requested_pixel_clock/2;
                        audio_output->crtc_info.calculated_pixel_clock =
                                        pipe_ctx->stream_res.pix_clk_params.requested_pix_clk/2;

                }
        }

        if (pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT ||
                        pipe_ctx->stream->signal == SIGNAL_TYPE_DISPLAY_PORT_MST) {
                audio_output->pll_info.dp_dto_source_clock_in_khz =
                                state->dis_clk->funcs->get_dp_ref_clk_frequency(
                                                state->dis_clk);
        }

        audio_output->pll_info.feed_back_divider =
                        pipe_ctx->pll_settings.feedback_divider;

        audio_output->pll_info.dto_source =
                translate_to_dto_source(
                        pipe_ctx->stream_res.tg->inst + 1);

        /* TODO hard code to enable for now. Need get from stream */
        audio_output->pll_info.ss_enabled = true;

        audio_output->pll_info.ss_percentage =
                        pipe_ctx->pll_settings.ss_percentage;
}

static void get_surface_visual_confirm_color(const struct pipe_ctx *pipe_ctx,
                struct tg_color *color)
{
        uint32_t color_value = MAX_TG_COLOR_VALUE * (4 - pipe_ctx->stream_res.tg->inst) / 4;

        switch (pipe_ctx->plane_res.scl_data.format) {
        case PIXEL_FORMAT_ARGB8888:
                /* set boarder color to red */
                color->color_r_cr = color_value;
                break;

        case PIXEL_FORMAT_ARGB2101010:
                /* set boarder color to blue */
                color->color_b_cb = color_value;
                break;
        case PIXEL_FORMAT_420BPP8:
                /* set boarder color to green */
                color->color_g_y = color_value;
                break;
        case PIXEL_FORMAT_420BPP10:
                /* set boarder color to yellow */
                color->color_g_y = color_value;
                color->color_r_cr = color_value;
                break;
        case PIXEL_FORMAT_FP16:
                /* set boarder color to white */
                color->color_r_cr = color_value;
                color->color_b_cb = color_value;
                color->color_g_y = color_value;
                break;
        default:
                break;
        }
}

static void program_scaler(const struct dc *dc,
                const struct pipe_ctx *pipe_ctx)
{
        struct tg_color color = {0};

#if defined(CONFIG_DRM_AMD_DC_DCN1_0)
        /* TOFPGA */
        if (pipe_ctx->plane_res.xfm->funcs->transform_set_pixel_storage_depth == NULL)
                return;
#endif

        if (dc->debug.visual_confirm == VISUAL_CONFIRM_SURFACE)
                get_surface_visual_confirm_color(pipe_ctx, &color);
        else
                color_space_to_black_color(dc,
                                pipe_ctx->stream->output_color_space,
                                &color);

        pipe_ctx->plane_res.xfm->funcs->transform_set_pixel_storage_depth(
                pipe_ctx->plane_res.xfm,
                pipe_ctx->plane_res.scl_data.lb_params.depth,
                &pipe_ctx->stream->bit_depth_params);

        if (pipe_ctx->stream_res.tg->funcs->set_overscan_blank_color) {
                /*
                 * The way 420 is packed, 2 channels carry Y component, 1 channel
                 * alternate between Cb and Cr, so both channels need the pixel
                 * value for Y
                 */
                if (pipe_ctx->stream->timing.pixel_encoding == PIXEL_ENCODING_YCBCR420)
                        color.color_r_cr = color.color_g_y;

                pipe_ctx->stream_res.tg->funcs->set_overscan_blank_color(
                                pipe_ctx->stream_res.tg,
                                &color);
        }

        pipe_ctx->plane_res.xfm->funcs->transform_set_scaler(pipe_ctx->plane_res.xfm,
                &pipe_ctx->plane_res.scl_data);
}

static enum dc_status dce110_enable_stream_timing(
                struct pipe_ctx *pipe_ctx,
                struct dc_state *context,
                struct dc *dc)
{
        struct dc_stream_state *stream = pipe_ctx->stream;
        struct pipe_ctx *pipe_ctx_old = &dc->current_state->res_ctx.
                        pipe_ctx[pipe_ctx->pipe_idx];
        struct tg_color black_color = {0};
        struct drr_params params = {0};
        unsigned int event_triggers = 0;

        if (!pipe_ctx_old->stream) {

                /* program blank color */
                color_space_to_black_color(dc,
                                stream->output_color_space, &black_color);
                pipe_ctx->stream_res.tg->funcs->set_blank_color(
                                pipe_ctx->stream_res.tg,
                                &black_color);

                /*
                 * Must blank CRTC after disabling power gating and before any
                 * programming, otherwise CRTC will be hung in bad state
                 */
                pipe_ctx->stream_res.tg->funcs->set_blank(pipe_ctx->stream_res.tg, true);

                if (false == pipe_ctx->clock_source->funcs->program_pix_clk(
                                pipe_ctx->clock_source,
                                &pipe_ctx->stream_res.pix_clk_params,
                                &pipe_ctx->pll_settings)) {
                        BREAK_TO_DEBUGGER();
                        return DC_ERROR_UNEXPECTED;
                }

                pipe_ctx->stream_res.tg->funcs->program_timing(
                                pipe_ctx->stream_res.tg,
                                &stream->timing,
                                true);

                params.vertical_total_min = stream->adjust.v_total_min;
                params.vertical_total_max = stream->adjust.v_total_max;
                if (pipe_ctx->stream_res.tg->funcs->set_drr)
                        pipe_ctx->stream_res.tg->funcs->set_drr(
                                pipe_ctx->stream_res.tg, &params);

                // DRR should set trigger event to monitor surface update event
                if (stream->adjust.v_total_min != 0 &&
                                stream->adjust.v_total_max != 0)
                        event_triggers = 0x80;
                if (pipe_ctx->stream_res.tg->funcs->set_static_screen_control)
                        pipe_ctx->stream_res.tg->funcs->set_static_screen_control(
                                pipe_ctx->stream_res.tg, event_triggers);
        }

        if (!pipe_ctx_old->stream) {
                if (false == pipe_ctx->stream_res.tg->funcs->enable_crtc(
                                pipe_ctx->stream_res.tg)) {
                        BREAK_TO_DEBUGGER();
                        return DC_ERROR_UNEXPECTED;
                }
        }

        return DC_OK;
}

static enum dc_status apply_single_controller_ctx_to_hw(
                struct pipe_ctx *pipe_ctx,
                struct dc_state *context,
                struct dc *dc)
{
        struct dc_stream_state *stream = pipe_ctx->stream;

        if (pipe_ctx->stream_res.audio != NULL) {
                struct audio_output audio_output;

                build_audio_output(context, pipe_ctx, &audio_output);

                if (dc_is_dp_signal(pipe_ctx->stream->signal))
                        pipe_ctx->stream_res.stream_enc->funcs->dp_audio_setup(
                                        pipe_ctx->stream_res.stream_enc,
                                        pipe_ctx->stream_res.audio->inst,
                                        &pipe_ctx->stream->audio_info);
                else
                        pipe_ctx->stream_res.stream_enc->funcs->hdmi_audio_setup(
                                        pipe_ctx->stream_res.stream_enc,
                                        pipe_ctx->stream_res.audio->inst,
                                        &pipe_ctx->stream->audio_info,
                                        &audio_output.crtc_info);

                pipe_ctx->stream_res.audio->funcs->az_configure(
                                pipe_ctx->stream_res.audio,
                                pipe_ctx->stream->signal,
                                &audio_output.crtc_info,
                                &pipe_ctx->stream->audio_info);
        }

        /*  */
        dc->hwss.enable_stream_timing(pipe_ctx, context, dc);

        /* TODO: move to stream encoder */
        if (pipe_ctx->stream->signal != SIGNAL_TYPE_VIRTUAL)
                if (DC_OK != bios_parser_crtc_source_select(pipe_ctx)) {
                        BREAK_TO_DEBUGGER();
DRM_DEBUG("dfly: bios_parser_crtc_source_select\n");
                        return DC_ERROR_UNEXPECTED;
                }

        pipe_ctx->stream_res.opp->funcs->opp_set_dyn_expansion(
                        pipe_ctx->stream_res.opp,
                        COLOR_SPACE_YCBCR601,
                        stream->timing.display_color_depth,
                        pipe_ctx->stream->signal);

        pipe_ctx->stream_res.opp->funcs->opp_program_fmt(
                pipe_ctx->stream_res.opp,
                &stream->bit_depth_params,
                &stream->clamping);

        if (!stream->dpms_off)
                core_link_enable_stream(context, pipe_ctx);

        pipe_ctx->plane_res.scl_data.lb_params.alpha_en = pipe_ctx->bottom_pipe != 0;

        pipe_ctx->stream->sink->link->psr_enabled = false;

        return DC_OK;
}

/******************************************************************************/

static void power_down_encoders(struct dc *dc)
{
        int i;
        enum connector_id connector_id;
        enum signal_type signal = SIGNAL_TYPE_NONE;

        /* do not know BIOS back-front mapping, simply blank all. It will not
         * hurt for non-DP
         */
        for (i = 0; i < dc->res_pool->stream_enc_count; i++) {
                dc->res_pool->stream_enc[i]->funcs->dp_blank(
                                        dc->res_pool->stream_enc[i]);
        }

        for (i = 0; i < dc->link_count; i++) {
                connector_id = dal_graphics_object_id_get_connector_id(dc->links[i]->link_id);
                if ((connector_id == CONNECTOR_ID_DISPLAY_PORT) ||
                        (connector_id == CONNECTOR_ID_EDP)) {

                        if (!dc->links[i]->wa_flags.dp_keep_receiver_powered)
                                dp_receiver_power_ctrl(dc->links[i], false);
                        if (connector_id == CONNECTOR_ID_EDP)
                                signal = SIGNAL_TYPE_EDP;
                }

                dc->links[i]->link_enc->funcs->disable_output(
                                dc->links[i]->link_enc, signal);
        }
}

static void power_down_controllers(struct dc *dc)
{
        int i;

        for (i = 0; i < dc->res_pool->timing_generator_count; i++) {
                dc->res_pool->timing_generators[i]->funcs->disable_crtc(
                                dc->res_pool->timing_generators[i]);
        }
}

static void power_down_clock_sources(struct dc *dc)
{
        int i;

        if (dc->res_pool->dp_clock_source->funcs->cs_power_down(
                dc->res_pool->dp_clock_source) == false)
                dm_error("Failed to power down pll! (dp clk src)\n");

        for (i = 0; i < dc->res_pool->clk_src_count; i++) {
                if (dc->res_pool->clock_sources[i]->funcs->cs_power_down(
                                dc->res_pool->clock_sources[i]) == false)
                        dm_error("Failed to power down pll! (clk src index=%d)\n", i);
        }
}

static void power_down_all_hw_blocks(struct dc *dc)
{
        power_down_encoders(dc);

        power_down_controllers(dc);

        power_down_clock_sources(dc);

        if (dc->fbc_compressor)
                dc->fbc_compressor->funcs->disable_fbc(dc->fbc_compressor);
}

static void disable_vga_and_power_gate_all_controllers(
                struct dc *dc)
{
        int i;
        struct timing_generator *tg;
        struct dc_context *ctx = dc->ctx;

        for (i = 0; i < dc->res_pool->timing_generator_count; i++) {
                tg = dc->res_pool->timing_generators[i];

                if (tg->funcs->disable_vga)
                        tg->funcs->disable_vga(tg);
        }
        for (i = 0; i < dc->res_pool->pipe_count; i++) {
                /* Enable CLOCK gating for each pipe BEFORE controller
                 * powergating. */
                enable_display_pipe_clock_gating(ctx,
                                true);

                dc->current_state->res_ctx.pipe_ctx[i].pipe_idx = i;
                dc->hwss.disable_plane(dc,
                        &dc->current_state->res_ctx.pipe_ctx[i]);
        }
}

static struct dc_link *get_link_for_edp(struct dc *dc)
{
        int i;

        for (i = 0; i < dc->link_count; i++) {
                if (dc->links[i]->connector_signal == SIGNAL_TYPE_EDP)
                        return dc->links[i];
        }
        return NULL;
}

static struct dc_link *get_link_for_edp_not_in_use(
                struct dc *dc,
                struct dc_state *context)
{
        int i;
        struct dc_link *link = NULL;

        /* check if eDP panel is suppose to be set mode, if yes, no need to disable */
        for (i = 0; i < context->stream_count; i++) {
                if (context->streams[i]->signal == SIGNAL_TYPE_EDP)
                        return NULL;
        }

        /* check if there is an eDP panel not in use */
        for (i = 0; i < dc->link_count; i++) {
                if (dc->links[i]->local_sink &&
                        dc->links[i]->local_sink->sink_signal == SIGNAL_TYPE_EDP) {
                        link = dc->links[i];
                        break;
                }
        }

        return link;
}

/**
 * When ASIC goes from VBIOS/VGA mode to driver/accelerated mode we need:
 *  1. Power down all DC HW blocks
 *  2. Disable VGA engine on all controllers
 *  3. Enable power gating for controller
 *  4. Set acc_mode_change bit (VBIOS will clear this bit when going to FSDOS)
 */
void dce110_enable_accelerated_mode(struct dc *dc, struct dc_state *context)
{
        int i;
        struct dc_link *edp_link_to_turnoff = NULL;
        struct dc_link *edp_link = get_link_for_edp(dc);
        bool can_edp_fast_boot_optimize = false;
        bool apply_edp_fast_boot_optimization = false;

        if (edp_link) {
                /* this seems to cause blank screens on DCE8 */
                if ((dc->ctx->dce_version == DCE_VERSION_8_0) ||
                    (dc->ctx->dce_version == DCE_VERSION_8_1) ||
                    (dc->ctx->dce_version == DCE_VERSION_8_3))
                        can_edp_fast_boot_optimize = false;
                else
                        can_edp_fast_boot_optimize =
                                edp_link->link_enc->funcs->is_dig_enabled(edp_link->link_enc);
        }

        if (can_edp_fast_boot_optimize)
                edp_link_to_turnoff = get_link_for_edp_not_in_use(dc, context);

        /* if OS doesn't light up eDP and eDP link is available, we want to disable
         * If resume from S4/S5, should optimization.
         */
        if (can_edp_fast_boot_optimize && !edp_link_to_turnoff) {
                /* Find eDP stream and set optimization flag */
                for (i = 0; i < context->stream_count; i++) {
                        if (context->streams[i]->signal == SIGNAL_TYPE_EDP) {
                                context->streams[i]->apply_edp_fast_boot_optimization = true;
                                apply_edp_fast_boot_optimization = true;
                        }
                }
        }

        if (!apply_edp_fast_boot_optimization) {
                if (edp_link_to_turnoff) {
                        /*turn off backlight before DP_blank and encoder powered down*/
                        dc->hwss.edp_backlight_control(edp_link_to_turnoff, false);
                }
                /*resume from S3, no vbios posting, no need to power down again*/
                power_down_all_hw_blocks(dc);
                disable_vga_and_power_gate_all_controllers(dc);
                if (edp_link_to_turnoff)
                        dc->hwss.edp_power_control(edp_link_to_turnoff, false);
        }
        bios_set_scratch_acc_mode_change(dc->ctx->dc_bios);
}

static uint32_t compute_pstate_blackout_duration(
        struct bw_fixed blackout_duration,
        const struct dc_stream_state *stream)
{
        uint32_t total_dest_line_time_ns;
        uint32_t pstate_blackout_duration_ns;

        pstate_blackout_duration_ns = 1000 * blackout_duration.value >> 24;

        total_dest_line_time_ns = 1000000UL *
                stream->timing.h_total /
                stream->timing.pix_clk_khz +
                pstate_blackout_duration_ns;

        return total_dest_line_time_ns;
}

static void dce110_set_displaymarks(
        const struct dc *dc,
        struct dc_state *context)
{
        uint8_t i, num_pipes;
        unsigned int underlay_idx = dc->res_pool->underlay_pipe_index;

        for (i = 0, num_pipes = 0; i < MAX_PIPES; i++) {
                struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
                uint32_t total_dest_line_time_ns;

                if (pipe_ctx->stream == NULL)
                        continue;

                total_dest_line_time_ns = compute_pstate_blackout_duration(
                        dc->bw_vbios->blackout_duration, pipe_ctx->stream);
                pipe_ctx->plane_res.mi->funcs->mem_input_program_display_marks(
                        pipe_ctx->plane_res.mi,
                        context->bw.dce.nbp_state_change_wm_ns[num_pipes],
                        context->bw.dce.stutter_exit_wm_ns[num_pipes],
                        context->bw.dce.stutter_entry_wm_ns[num_pipes],
                        context->bw.dce.urgent_wm_ns[num_pipes],
                        total_dest_line_time_ns);
                if (i == underlay_idx) {
                        num_pipes++;
                        pipe_ctx->plane_res.mi->funcs->mem_input_program_chroma_display_marks(
                                pipe_ctx->plane_res.mi,
                                context->bw.dce.nbp_state_change_wm_ns[num_pipes],
                                context->bw.dce.stutter_exit_wm_ns[num_pipes],
                                context->bw.dce.urgent_wm_ns[num_pipes],
                                total_dest_line_time_ns);
                }
                num_pipes++;
        }
}

void dce110_set_safe_displaymarks(
                struct resource_context *res_ctx,
                const struct resource_pool *pool)
{
        int i;
        int underlay_idx = pool->underlay_pipe_index;
        struct dce_watermarks max_marks = {
                MAX_WATERMARK, MAX_WATERMARK, MAX_WATERMARK, MAX_WATERMARK };
        struct dce_watermarks nbp_marks = {
                SAFE_NBP_MARK, SAFE_NBP_MARK, SAFE_NBP_MARK, SAFE_NBP_MARK };
        struct dce_watermarks min_marks = { 0, 0, 0, 0};

        for (i = 0; i < MAX_PIPES; i++) {
                if (res_ctx->pipe_ctx[i].stream == NULL || res_ctx->pipe_ctx[i].plane_res.mi == NULL)
                        continue;

                res_ctx->pipe_ctx[i].plane_res.mi->funcs->mem_input_program_display_marks(
                                res_ctx->pipe_ctx[i].plane_res.mi,
                                nbp_marks,
                                max_marks,
                                min_marks,
                                max_marks,
                                MAX_WATERMARK);

                if (i == underlay_idx)
                        res_ctx->pipe_ctx[i].plane_res.mi->funcs->mem_input_program_chroma_display_marks(
                                res_ctx->pipe_ctx[i].plane_res.mi,
                                nbp_marks,
                                max_marks,
                                max_marks,
                                MAX_WATERMARK);

        }
}

/*******************************************************************************
 * Public functions
 ******************************************************************************/

static void set_drr(struct pipe_ctx **pipe_ctx,
                int num_pipes, int vmin, int vmax)
{
        int i = 0;
        struct drr_params params = {0};
        // DRR should set trigger event to monitor surface update event
        unsigned int event_triggers = 0x80;

        params.vertical_total_max = vmax;
        params.vertical_total_min = vmin;

        /* TODO: If multiple pipes are to be supported, you need
         * some GSL stuff. Static screen triggers may be programmed differently
         * as well.
         */
        for (i = 0; i < num_pipes; i++) {
                pipe_ctx[i]->stream_res.tg->funcs->set_drr(
                        pipe_ctx[i]->stream_res.tg, &params);

                if (vmax != 0 && vmin != 0)
                        pipe_ctx[i]->stream_res.tg->funcs->set_static_screen_control(
                                        pipe_ctx[i]->stream_res.tg,
                                        event_triggers);
        }
}

static void get_position(struct pipe_ctx **pipe_ctx,
                int num_pipes,
                struct crtc_position *position)
{
        int i = 0;

        /* TODO: handle pipes > 1
         */
        for (i = 0; i < num_pipes; i++)
                pipe_ctx[i]->stream_res.tg->funcs->get_position(pipe_ctx[i]->stream_res.tg, position);
}

static void set_static_screen_control(struct pipe_ctx **pipe_ctx,
                int num_pipes, const struct dc_static_screen_events *events)
{
        unsigned int i;
        unsigned int value = 0;

        if (events->overlay_update)
                value |= 0x100;
        if (events->surface_update)
                value |= 0x80;
        if (events->cursor_update)
                value |= 0x2;
        if (events->force_trigger)
                value |= 0x1;

        if (num_pipes) {
                struct dc *dc = pipe_ctx[0]->stream->ctx->dc;

                if (dc->fbc_compressor)
                        value |= 0x84;
        }

        for (i = 0; i < num_pipes; i++)
                pipe_ctx[i]->stream_res.tg->funcs->
                        set_static_screen_control(pipe_ctx[i]->stream_res.tg, value);
}

/* unit: in_khz before mode set, get pixel clock from context. ASIC register
 * may not be programmed yet
 */
static uint32_t get_max_pixel_clock_for_all_paths(
        struct dc *dc,
        struct dc_state *context)
{
        uint32_t max_pix_clk = 0;
        int i;

        for (i = 0; i < MAX_PIPES; i++) {
                struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];

                if (pipe_ctx->stream == NULL)
                        continue;

                /* do not check under lay */
                if (pipe_ctx->top_pipe)
                        continue;

                if (pipe_ctx->stream_res.pix_clk_params.requested_pix_clk > max_pix_clk)
                        max_pix_clk =
                                pipe_ctx->stream_res.pix_clk_params.requested_pix_clk;
        }

        return max_pix_clk;
}

/*
 *  Check if FBC can be enabled
 */
static bool should_enable_fbc(struct dc *dc,
                              struct dc_state *context,
                              uint32_t *pipe_idx)
{
        uint32_t i;
        struct pipe_ctx *pipe_ctx = NULL;
        struct resource_context *res_ctx = &context->res_ctx;


        ASSERT(dc->fbc_compressor);

        /* FBC memory should be allocated */
        if (!dc->ctx->fbc_gpu_addr)
                return false;

        /* Only supports single display */
        if (context->stream_count != 1)
                return false;

        for (i = 0; i < dc->res_pool->pipe_count; i++) {
                if (res_ctx->pipe_ctx[i].stream) {
                        pipe_ctx = &res_ctx->pipe_ctx[i];
                        *pipe_idx = i;
                        break;
                }
        }

        /* Pipe context should be found */
        ASSERT(pipe_ctx);

        /* Only supports eDP */
        if (pipe_ctx->stream->sink->link->connector_signal != SIGNAL_TYPE_EDP)
                return false;

        /* PSR should not be enabled */
        if (pipe_ctx->stream->sink->link->psr_enabled)
                return false;

        /* Nothing to compress */
        if (!pipe_ctx->plane_state)
                return false;

        /* Only for non-linear tiling */
        if (pipe_ctx->plane_state->tiling_info.gfx8.array_mode == DC_ARRAY_LINEAR_GENERAL)
                return false;

        return true;
}

/*
 *  Enable FBC
 */
static void enable_fbc(struct dc *dc,
                       struct dc_state *context)
{
        uint32_t pipe_idx = 0;

        if (should_enable_fbc(dc, context, &pipe_idx)) {
                /* Program GRPH COMPRESSED ADDRESS and PITCH */
                struct compr_addr_and_pitch_params params = {0, 0, 0};
                struct compressor *compr = dc->fbc_compressor;
                struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[pipe_idx];


                params.source_view_width = pipe_ctx->stream->timing.h_addressable;
                params.source_view_height = pipe_ctx->stream->timing.v_addressable;

                compr->compr_surface_address.quad_part = dc->ctx->fbc_gpu_addr;

                compr->funcs->surface_address_and_pitch(compr, &params);
                compr->funcs->set_fbc_invalidation_triggers(compr, 1);

                compr->funcs->enable_fbc(compr, &params);
        }
}

static void dce110_reset_hw_ctx_wrap(
                struct dc *dc,
                struct dc_state *context)
{
        int i;

        /* Reset old context */
        /* look up the targets that have been removed since last commit */
        for (i = 0; i < MAX_PIPES; i++) {
                struct pipe_ctx *pipe_ctx_old =
                        &dc->current_state->res_ctx.pipe_ctx[i];
                struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];

                /* Note: We need to disable output if clock sources change,
                 * since bios does optimization and doesn't apply if changing
                 * PHY when not already disabled.
                 */

                /* Skip underlay pipe since it will be handled in commit surface*/
                if (!pipe_ctx_old->stream || pipe_ctx_old->top_pipe)
                        continue;

                if (!pipe_ctx->stream ||
                                pipe_need_reprogram(pipe_ctx_old, pipe_ctx)) {
                        struct clock_source *old_clk = pipe_ctx_old->clock_source;

                        /* Disable if new stream is null. O/w, if stream is
                         * disabled already, no need to disable again.
                         */
                        if (!pipe_ctx->stream || !pipe_ctx->stream->dpms_off)
                                core_link_disable_stream(pipe_ctx_old, FREE_ACQUIRED_RESOURCE);

                        pipe_ctx_old->stream_res.tg->funcs->set_blank(pipe_ctx_old->stream_res.tg, true);
                        if (!hwss_wait_for_blank_complete(pipe_ctx_old->stream_res.tg)) {
                                dm_error("DC: failed to blank crtc!\n");
                                BREAK_TO_DEBUGGER();
                        }
                        pipe_ctx_old->stream_res.tg->funcs->disable_crtc(pipe_ctx_old->stream_res.tg);
                        pipe_ctx_old->plane_res.mi->funcs->free_mem_input(
                                        pipe_ctx_old->plane_res.mi, dc->current_state->stream_count);

                        if (old_clk && 0 == resource_get_clock_source_reference(&context->res_ctx,
                                                                                dc->res_pool,
                                                                                old_clk))
                                old_clk->funcs->cs_power_down(old_clk);

                        dc->hwss.disable_plane(dc, pipe_ctx_old);

                        pipe_ctx_old->stream = NULL;
                }
        }
}

static void dce110_setup_audio_dto(
                struct dc *dc,
                struct dc_state *context)
{
        int i;

        /* program audio wall clock. use HDMI as clock source if HDMI
         * audio active. Otherwise, use DP as clock source
         * first, loop to find any HDMI audio, if not, loop find DP audio
         */
        /* Setup audio rate clock source */
        /* Issue:
        * Audio lag happened on DP monitor when unplug a HDMI monitor
        *
        * Cause:
        * In case of DP and HDMI connected or HDMI only, DCCG_AUDIO_DTO_SEL
        * is set to either dto0 or dto1, audio should work fine.
        * In case of DP connected only, DCCG_AUDIO_DTO_SEL should be dto1,
        * set to dto0 will cause audio lag.
        *
        * Solution:
        * Not optimized audio wall dto setup. When mode set, iterate pipe_ctx,
        * find first available pipe with audio, setup audio wall DTO per topology
        * instead of per pipe.
        */
        for (i = 0; i < dc->res_pool->pipe_count; i++) {
                struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];

                if (pipe_ctx->stream == NULL)
                        continue;

                if (pipe_ctx->top_pipe)
                        continue;

                if (pipe_ctx->stream->signal != SIGNAL_TYPE_HDMI_TYPE_A)
                        continue;

                if (pipe_ctx->stream_res.audio != NULL) {
                        struct audio_output audio_output;

                        build_audio_output(context, pipe_ctx, &audio_output);

                        pipe_ctx->stream_res.audio->funcs->wall_dto_setup(
                                pipe_ctx->stream_res.audio,
                                pipe_ctx->stream->signal,
                                &audio_output.crtc_info,
                                &audio_output.pll_info);
                        break;
                }
        }

        /* no HDMI audio is found, try DP audio */
        if (i == dc->res_pool->pipe_count) {
                for (i = 0; i < dc->res_pool->pipe_count; i++) {
                        struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];

                        if (pipe_ctx->stream == NULL)
                                continue;

                        if (pipe_ctx->top_pipe)
                                continue;

                        if (!dc_is_dp_signal(pipe_ctx->stream->signal))
                                continue;

                        if (pipe_ctx->stream_res.audio != NULL) {
                                struct audio_output audio_output;

                                build_audio_output(context, pipe_ctx, &audio_output);

                                pipe_ctx->stream_res.audio->funcs->wall_dto_setup(
                                        pipe_ctx->stream_res.audio,
                                        pipe_ctx->stream->signal,
                                        &audio_output.crtc_info,
                                        &audio_output.pll_info);
                                break;
                        }
                }
        }
}

enum dc_status dce110_apply_ctx_to_hw(
                struct dc *dc,
                struct dc_state *context)
{
        struct dc_bios *dcb = dc->ctx->dc_bios;
        enum dc_status status;
        int i;

        /* Reset old context */
        /* look up the targets that have been removed since last commit */
        dc->hwss.reset_hw_ctx_wrap(dc, context);
DRM_DEBUG("dfly: reset_hw_ctx_wrap\n");

        /* Skip applying if no targets */
        if (context->stream_count <= 0)
                return DC_OK;

        /* Apply new context */
        dcb->funcs->set_scratch_critical_state(dcb, true);

        /* below is for real asic only */
        for (i = 0; i < dc->res_pool->pipe_count; i++) {
                struct pipe_ctx *pipe_ctx_old =
                                        &dc->current_state->res_ctx.pipe_ctx[i];
                struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];

                if (pipe_ctx->stream == NULL || pipe_ctx->top_pipe)
                        continue;

                if (pipe_ctx->stream == pipe_ctx_old->stream) {
                        if (pipe_ctx_old->clock_source != pipe_ctx->clock_source)
                                dce_crtc_switch_to_clk_src(dc->hwseq,
                                                pipe_ctx->clock_source, i);
                        continue;
                }

                dc->hwss.enable_display_power_gating(
                                dc, i, dc->ctx->dc_bios,
                                PIPE_GATING_CONTROL_DISABLE);
        }

        if (dc->fbc_compressor)
                dc->fbc_compressor->funcs->disable_fbc(dc->fbc_compressor);

        dce110_setup_audio_dto(dc, context);

        for (i = 0; i < dc->res_pool->pipe_count; i++) {
                struct pipe_ctx *pipe_ctx_old =
                                        &dc->current_state->res_ctx.pipe_ctx[i];
                struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];

                if (pipe_ctx->stream == NULL)
                        continue;

                if (pipe_ctx->stream == pipe_ctx_old->stream)
                        continue;

                if (pipe_ctx_old->stream && !pipe_need_reprogram(pipe_ctx_old, pipe_ctx))
                        continue;

                if (pipe_ctx->top_pipe)
                        continue;

                status = apply_single_controller_ctx_to_hw(
                                pipe_ctx,
                                context,
                                dc);
DRM_DEBUG("dfly: apply_single_controller_ctx_to_hw status = %d, i = %d", status, i);

                if (DC_OK != status) {
                        return status;
                }
        }

        dcb->funcs->set_scratch_critical_state(dcb, false);

        if (dc->fbc_compressor)
                enable_fbc(dc, context);

        return DC_OK;
}

/*******************************************************************************
 * Front End programming
 ******************************************************************************/
static void set_default_colors(struct pipe_ctx *pipe_ctx)
{
        struct default_adjustment default_adjust = { 0 };

        default_adjust.force_hw_default = false;
        default_adjust.in_color_space = pipe_ctx->plane_state->color_space;
        default_adjust.out_color_space = pipe_ctx->stream->output_color_space;
        default_adjust.csc_adjust_type = GRAPHICS_CSC_ADJUST_TYPE_SW;
        default_adjust.surface_pixel_format = pipe_ctx->plane_res.scl_data.format;

        /* display color depth */
        default_adjust.color_depth =
                pipe_ctx->stream->timing.display_color_depth;

        /* Lb color depth */
        default_adjust.lb_color_depth = pipe_ctx->plane_res.scl_data.lb_params.depth;

        pipe_ctx->plane_res.xfm->funcs->opp_set_csc_default(
                                        pipe_ctx->plane_res.xfm, &default_adjust);
}


/*******************************************************************************
 * In order to turn on/off specific surface we will program
 * Blender + CRTC
 *
 * In case that we have two surfaces and they have a different visibility
 * we can't turn off the CRTC since it will turn off the entire display
 *
 * |----------------------------------------------- |
 * |bottom pipe|curr pipe  |              |         |
 * |Surface    |Surface    | Blender      |  CRCT   |
 * |visibility |visibility | Configuration|         |
 * |------------------------------------------------|
 * |   off     |    off    | CURRENT_PIPE | blank   |
 * |   off     |    on     | CURRENT_PIPE | unblank |
 * |   on      |    off    | OTHER_PIPE   | unblank |
 * |   on      |    on     | BLENDING     | unblank |
 * -------------------------------------------------|
 *
 ******************************************************************************/
static void program_surface_visibility(const struct dc *dc,
                struct pipe_ctx *pipe_ctx)
{
        enum blnd_mode blender_mode = BLND_MODE_CURRENT_PIPE;
        bool blank_target = false;

        if (pipe_ctx->bottom_pipe) {

                /* For now we are supporting only two pipes */
                ASSERT(pipe_ctx->bottom_pipe->bottom_pipe == NULL);

                if (pipe_ctx->bottom_pipe->plane_state->visible) {
                        if (pipe_ctx->plane_state->visible)
                                blender_mode = BLND_MODE_BLENDING;
                        else
                                blender_mode = BLND_MODE_OTHER_PIPE;

                } else if (!pipe_ctx->plane_state->visible)
                        blank_target = true;

        } else if (!pipe_ctx->plane_state->visible)
                blank_target = true;

        dce_set_blender_mode(dc->hwseq, pipe_ctx->stream_res.tg->inst, blender_mode);
        pipe_ctx->stream_res.tg->funcs->set_blank(pipe_ctx->stream_res.tg, blank_target);

}

static void program_gamut_remap(struct pipe_ctx *pipe_ctx)
{
        int i = 0;
        struct xfm_grph_csc_adjustment adjust;
        memset(&adjust, 0, sizeof(adjust));
        adjust.gamut_adjust_type = GRAPHICS_GAMUT_ADJUST_TYPE_BYPASS;


        if (pipe_ctx->stream->gamut_remap_matrix.enable_remap == true) {
                adjust.gamut_adjust_type = GRAPHICS_GAMUT_ADJUST_TYPE_SW;

                for (i = 0; i < CSC_TEMPERATURE_MATRIX_SIZE; i++)
                        adjust.temperature_matrix[i] =
                                pipe_ctx->stream->gamut_remap_matrix.matrix[i];
        }

        pipe_ctx->plane_res.xfm->funcs->transform_set_gamut_remap(pipe_ctx->plane_res.xfm, &adjust);
}
static void update_plane_addr(const struct dc *dc,
                struct pipe_ctx *pipe_ctx)
{
        struct dc_plane_state *plane_state = pipe_ctx->plane_state;

        if (plane_state == NULL)
                return;

        pipe_ctx->plane_res.mi->funcs->mem_input_program_surface_flip_and_addr(
                        pipe_ctx->plane_res.mi,
                        &plane_state->address,
                        plane_state->flip_immediate);

        plane_state->status.requested_address = plane_state->address;
}

static void dce110_update_pending_status(struct pipe_ctx *pipe_ctx)
{
        struct dc_plane_state *plane_state = pipe_ctx->plane_state;

        if (plane_state == NULL)
                return;

        plane_state->status.is_flip_pending =
                        pipe_ctx->plane_res.mi->funcs->mem_input_is_flip_pending(
                                        pipe_ctx->plane_res.mi);

        if (plane_state->status.is_flip_pending && !plane_state->visible)
                pipe_ctx->plane_res.mi->current_address = pipe_ctx->plane_res.mi->request_address;

        plane_state->status.current_address = pipe_ctx->plane_res.mi->current_address;
        if (pipe_ctx->plane_res.mi->current_address.type == PLN_ADDR_TYPE_GRPH_STEREO &&
                        pipe_ctx->stream_res.tg->funcs->is_stereo_left_eye) {
                plane_state->status.is_right_eye =\
                                !pipe_ctx->stream_res.tg->funcs->is_stereo_left_eye(pipe_ctx->stream_res.tg);
        }
}

void dce110_power_down(struct dc *dc)
{
        power_down_all_hw_blocks(dc);
        disable_vga_and_power_gate_all_controllers(dc);
}

static bool wait_for_reset_trigger_to_occur(
        struct dc_context *dc_ctx,
        struct timing_generator *tg)
{
        bool rc = false;

        /* To avoid endless loop we wait at most
         * frames_to_wait_on_triggered_reset frames for the reset to occur. */
        const uint32_t frames_to_wait_on_triggered_reset = 10;
        uint32_t i;

        for (i = 0; i < frames_to_wait_on_triggered_reset; i++) {

                if (!tg->funcs->is_counter_moving(tg)) {
                        DC_ERROR("TG counter is not moving!\n");
                        break;
                }

                if (tg->funcs->did_triggered_reset_occur(tg)) {
                        rc = true;
                        /* usually occurs at i=1 */
                        DC_SYNC_INFO("GSL: reset occurred at wait count: %d\n",
                                        i);
                        break;
                }

                /* Wait for one frame. */
                tg->funcs->wait_for_state(tg, CRTC_STATE_VACTIVE);
                tg->funcs->wait_for_state(tg, CRTC_STATE_VBLANK);
        }

        if (false == rc)
                DC_ERROR("GSL: Timeout on reset trigger!\n");

        return rc;
}

/* Enable timing synchronization for a group of Timing Generators. */
static void dce110_enable_timing_synchronization(
                struct dc *dc,
                int group_index,
                int group_size,
                struct pipe_ctx *grouped_pipes[])
{
        struct dc_context *dc_ctx = dc->ctx;
        struct dcp_gsl_params gsl_params = { 0 };
        int i;

        DC_SYNC_INFO("GSL: Setting-up...\n");

        /* Designate a single TG in the group as a master.
         * Since HW doesn't care which one, we always assign
         * the 1st one in the group. */
        gsl_params.gsl_group = 0;
        gsl_params.gsl_master = grouped_pipes[0]->stream_res.tg->inst;

        for (i = 0; i < group_size; i++)
                grouped_pipes[i]->stream_res.tg->funcs->setup_global_swap_lock(
                                        grouped_pipes[i]->stream_res.tg, &gsl_params);

        /* Reset slave controllers on master VSync */
        DC_SYNC_INFO("GSL: enabling trigger-reset\n");

        for (i = 1 /* skip the master */; i < group_size; i++)
                grouped_pipes[i]->stream_res.tg->funcs->enable_reset_trigger(
                                grouped_pipes[i]->stream_res.tg,
                                gsl_params.gsl_group);

        for (i = 1 /* skip the master */; i < group_size; i++) {
                DC_SYNC_INFO("GSL: waiting for reset to occur.\n");
                wait_for_reset_trigger_to_occur(dc_ctx, grouped_pipes[i]->stream_res.tg);
                grouped_pipes[i]->stream_res.tg->funcs->disable_reset_trigger(
                                grouped_pipes[i]->stream_res.tg);
        }

        /* GSL Vblank synchronization is a one time sync mechanism, assumption
         * is that the sync'ed displays will not drift out of sync over time*/
        DC_SYNC_INFO("GSL: Restoring register states.\n");
        for (i = 0; i < group_size; i++)
                grouped_pipes[i]->stream_res.tg->funcs->tear_down_global_swap_lock(grouped_pipes[i]->stream_res.tg);

        DC_SYNC_INFO("GSL: Set-up complete.\n");
}

static void dce110_enable_per_frame_crtc_position_reset(
                struct dc *dc,
                int group_size,
                struct pipe_ctx *grouped_pipes[])
{
        struct dc_context *dc_ctx = dc->ctx;
        struct dcp_gsl_params gsl_params = { 0 };
        int i;

        gsl_params.gsl_group = 0;
        gsl_params.gsl_master = grouped_pipes[0]->stream->triggered_crtc_reset.event_source->status.primary_otg_inst;

        for (i = 0; i < group_size; i++)
                grouped_pipes[i]->stream_res.tg->funcs->setup_global_swap_lock(
                                        grouped_pipes[i]->stream_res.tg, &gsl_params);

        DC_SYNC_INFO("GSL: enabling trigger-reset\n");

        for (i = 1; i < group_size; i++)
                grouped_pipes[i]->stream_res.tg->funcs->enable_crtc_reset(
                                grouped_pipes[i]->stream_res.tg,
                                gsl_params.gsl_master,
                                &grouped_pipes[i]->stream->triggered_crtc_reset);

        DC_SYNC_INFO("GSL: waiting for reset to occur.\n");
        for (i = 1; i < group_size; i++)
                wait_for_reset_trigger_to_occur(dc_ctx, grouped_pipes[i]->stream_res.tg);

        for (i = 0; i < group_size; i++)
                grouped_pipes[i]->stream_res.tg->funcs->tear_down_global_swap_lock(grouped_pipes[i]->stream_res.tg);

}

static void init_hw(struct dc *dc)
{
        int i;
        struct dc_bios *bp;
        struct transform *xfm;
        struct abm *abm;

        bp = dc->ctx->dc_bios;
        for (i = 0; i < dc->res_pool->pipe_count; i++) {
                xfm = dc->res_pool->transforms[i];
                xfm->funcs->transform_reset(xfm);

                dc->hwss.enable_display_power_gating(
                                dc, i, bp,
                                PIPE_GATING_CONTROL_INIT);
                dc->hwss.enable_display_power_gating(
                                dc, i, bp,
                                PIPE_GATING_CONTROL_DISABLE);
                dc->hwss.enable_display_pipe_clock_gating(
                        dc->ctx,
                        true);
        }

        dce_clock_gating_power_up(dc->hwseq, false);
        /***************************************/

        for (i = 0; i < dc->link_count; i++) {
                /****************************************/
                /* Power up AND update implementation according to the
                 * required signal (which may be different from the
                 * default signal on connector). */
                struct dc_link *link = dc->links[i];

                if (link->link_enc->connector.id == CONNECTOR_ID_EDP)
                        dc->hwss.edp_power_control(link, true);

                link->link_enc->funcs->hw_init(link->link_enc);
        }

        for (i = 0; i < dc->res_pool->pipe_count; i++) {
                struct timing_generator *tg = dc->res_pool->timing_generators[i];

                tg->funcs->disable_vga(tg);

                /* Blank controller using driver code instead of
                 * command table. */
                tg->funcs->set_blank(tg, true);
                hwss_wait_for_blank_complete(tg);
        }

        for (i = 0; i < dc->res_pool->audio_count; i++) {
                struct audio *audio = dc->res_pool->audios[i];
                audio->funcs->hw_init(audio);
        }

        abm = dc->res_pool->abm;
        if (abm != NULL) {
                abm->funcs->init_backlight(abm);
                abm->funcs->abm_init(abm);
        }

        if (dc->fbc_compressor)
                dc->fbc_compressor->funcs->power_up_fbc(dc->fbc_compressor);

}

void dce110_fill_display_configs(
        const struct dc_state *context,
        struct dm_pp_display_configuration *pp_display_cfg)
{
        int j;
        int num_cfgs = 0;

        for (j = 0; j < context->stream_count; j++) {
                int k;

                const struct dc_stream_state *stream = context->streams[j];
                struct dm_pp_single_disp_config *cfg =
                        &pp_display_cfg->disp_configs[num_cfgs];
                const struct pipe_ctx *pipe_ctx = NULL;

                for (k = 0; k < MAX_PIPES; k++)
                        if (stream == context->res_ctx.pipe_ctx[k].stream) {
                                pipe_ctx = &context->res_ctx.pipe_ctx[k];
                                break;
                        }

                ASSERT(pipe_ctx != NULL);

                /* only notify active stream */
                if (stream->dpms_off)
                        continue;

                num_cfgs++;
                cfg->signal = pipe_ctx->stream->signal;
                cfg->pipe_idx = pipe_ctx->stream_res.tg->inst;
                cfg->src_height = stream->src.height;
                cfg->src_width = stream->src.width;
                cfg->ddi_channel_mapping =
                        stream->sink->link->ddi_channel_mapping.raw;
                cfg->transmitter =
                        stream->sink->link->link_enc->transmitter;
                cfg->link_settings.lane_count =
                        stream->sink->link->cur_link_settings.lane_count;
                cfg->link_settings.link_rate =
                        stream->sink->link->cur_link_settings.link_rate;
                cfg->link_settings.link_spread =
                        stream->sink->link->cur_link_settings.link_spread;
                cfg->sym_clock = stream->phy_pix_clk;
                /* Round v_refresh*/
                cfg->v_refresh = stream->timing.pix_clk_khz * 1000;
                cfg->v_refresh /= stream->timing.h_total;
                cfg->v_refresh = (cfg->v_refresh + stream->timing.v_total / 2)
                                                        / stream->timing.v_total;
        }

        pp_display_cfg->display_count = num_cfgs;
}

uint32_t dce110_get_min_vblank_time_us(const struct dc_state *context)
{
        uint8_t j;
        uint32_t min_vertical_blank_time = -1;

        for (j = 0; j < context->stream_count; j++) {
                struct dc_stream_state *stream = context->streams[j];
                uint32_t vertical_blank_in_pixels = 0;
                uint32_t vertical_blank_time = 0;

                vertical_blank_in_pixels = stream->timing.h_total *
                        (stream->timing.v_total
                         - stream->timing.v_addressable);

                vertical_blank_time = vertical_blank_in_pixels
                        * 1000 / stream->timing.pix_clk_khz;

                if (min_vertical_blank_time > vertical_blank_time)
                        min_vertical_blank_time = vertical_blank_time;
        }

        return min_vertical_blank_time;
}

static int determine_sclk_from_bounding_box(
                const struct dc *dc,
                int required_sclk)
{
        int i;

        /*
         * Some asics do not give us sclk levels, so we just report the actual
         * required sclk
         */
        if (dc->sclk_lvls.num_levels == 0)
                return required_sclk;

        for (i = 0; i < dc->sclk_lvls.num_levels; i++) {
                if (dc->sclk_lvls.clocks_in_khz[i] >= required_sclk)
                        return dc->sclk_lvls.clocks_in_khz[i];
        }
        /*
         * even maximum level could not satisfy requirement, this
         * is unexpected at this stage, should have been caught at
         * validation time
         */
        ASSERT(0);
        return dc->sclk_lvls.clocks_in_khz[dc->sclk_lvls.num_levels - 1];
}

static void pplib_apply_display_requirements(
        struct dc *dc,
        struct dc_state *context)
{
        struct dm_pp_display_configuration *pp_display_cfg = &context->pp_display_cfg;

        pp_display_cfg->all_displays_in_sync =
                context->bw.dce.all_displays_in_sync;
        pp_display_cfg->nb_pstate_switch_disable =
                        context->bw.dce.nbp_state_change_enable == false;
        pp_display_cfg->cpu_cc6_disable =
                        context->bw.dce.cpuc_state_change_enable == false;
        pp_display_cfg->cpu_pstate_disable =
                        context->bw.dce.cpup_state_change_enable == false;
        pp_display_cfg->cpu_pstate_separation_time =
                        context->bw.dce.blackout_recovery_time_us;

        pp_display_cfg->min_memory_clock_khz = context->bw.dce.yclk_khz
                / MEMORY_TYPE_MULTIPLIER;

        pp_display_cfg->min_engine_clock_khz = determine_sclk_from_bounding_box(
                        dc,
                        context->bw.dce.sclk_khz);

        pp_display_cfg->min_dcfclock_khz = pp_display_cfg->min_engine_clock_khz;

        pp_display_cfg->min_engine_clock_deep_sleep_khz
                        = context->bw.dce.sclk_deep_sleep_khz;

        pp_display_cfg->avail_mclk_switch_time_us =
                                                dce110_get_min_vblank_time_us(context);
        /* TODO: dce11.2*/
        pp_display_cfg->avail_mclk_switch_time_in_disp_active_us = 0;

        pp_display_cfg->disp_clk_khz = dc->res_pool->dccg->clks.dispclk_khz;

        dce110_fill_display_configs(context, pp_display_cfg);

        /* TODO: is this still applicable?*/
        if (pp_display_cfg->display_count == 1) {
                const struct dc_crtc_timing *timing =
                        &context->streams[0]->timing;

                pp_display_cfg->crtc_index =
                        pp_display_cfg->disp_configs[0].pipe_idx;
                pp_display_cfg->line_time_in_us = timing->h_total * 1000
                                                        / timing->pix_clk_khz;
        }

        if (memcmp(&dc->prev_display_config, pp_display_cfg, sizeof(
                        struct dm_pp_display_configuration)) !=  0)
                dm_pp_apply_display_requirements(dc->ctx, pp_display_cfg);

        dc->prev_display_config = *pp_display_cfg;
}

static void dce110_set_bandwidth(
                struct dc *dc,
                struct dc_state *context,
                bool decrease_allowed)
{
        struct dc_clocks req_clks;
        struct dccg *dccg = dc->res_pool->dccg;

        req_clks.dispclk_khz = context->bw.dce.dispclk_khz;
        req_clks.phyclk_khz = get_max_pixel_clock_for_all_paths(dc, context);

        if (decrease_allowed)
                dce110_set_displaymarks(dc, context);
        else
                dce110_set_safe_displaymarks(&context->res_ctx, dc->res_pool);

        if (dccg->funcs->update_dfs_bypass)
                dccg->funcs->update_dfs_bypass(
                        dccg,
                        dc,
                        context,
                        req_clks.dispclk_khz);

        dccg->funcs->update_clocks(
                        dccg,
                        &req_clks,
                        decrease_allowed);
        pplib_apply_display_requirements(dc, context);
}

static void dce110_program_front_end_for_pipe(
                struct dc *dc, struct pipe_ctx *pipe_ctx)
{
        struct mem_input *mi = pipe_ctx->plane_res.mi;
        struct pipe_ctx *old_pipe = NULL;
        struct dc_plane_state *plane_state = pipe_ctx->plane_state;
        struct xfm_grph_csc_adjustment adjust;
        struct out_csc_color_matrix tbl_entry;
        unsigned int underlay_idx = dc->res_pool->underlay_pipe_index;
        unsigned int i;
        DC_LOGGER_INIT();
        memset(&tbl_entry, 0, sizeof(tbl_entry));

        if (dc->current_state)
                old_pipe = &dc->current_state->res_ctx.pipe_ctx[pipe_ctx->pipe_idx];

        memset(&adjust, 0, sizeof(adjust));
        adjust.gamut_adjust_type = GRAPHICS_GAMUT_ADJUST_TYPE_BYPASS;

        dce_enable_fe_clock(dc->hwseq, mi->inst, true);

        set_default_colors(pipe_ctx);
        if (pipe_ctx->stream->csc_color_matrix.enable_adjustment
                        == true) {
                tbl_entry.color_space =
                        pipe_ctx->stream->output_color_space;

                for (i = 0; i < 12; i++)
                        tbl_entry.regval[i] =
                        pipe_ctx->stream->csc_color_matrix.matrix[i];

                pipe_ctx->plane_res.xfm->funcs->opp_set_csc_adjustment
                                (pipe_ctx->plane_res.xfm, &tbl_entry);
        }

        if (pipe_ctx->stream->gamut_remap_matrix.enable_remap == true) {
                adjust.gamut_adjust_type = GRAPHICS_GAMUT_ADJUST_TYPE_SW;

                for (i = 0; i < CSC_TEMPERATURE_MATRIX_SIZE; i++)
                        adjust.temperature_matrix[i] =
                                pipe_ctx->stream->gamut_remap_matrix.matrix[i];
        }

        pipe_ctx->plane_res.xfm->funcs->transform_set_gamut_remap(pipe_ctx->plane_res.xfm, &adjust);

        pipe_ctx->plane_res.scl_data.lb_params.alpha_en = pipe_ctx->bottom_pipe != 0;

        program_scaler(dc, pipe_ctx);

        /* fbc not applicable on Underlay pipe */
        if (dc->fbc_compressor && old_pipe->stream &&
            pipe_ctx->pipe_idx != underlay_idx) {
                if (plane_state->tiling_info.gfx8.array_mode == DC_ARRAY_LINEAR_GENERAL)
                        dc->fbc_compressor->funcs->disable_fbc(dc->fbc_compressor);
                else
                        enable_fbc(dc, dc->current_state);
        }

        mi->funcs->mem_input_program_surface_config(
                        mi,
                        plane_state->format,
                        &plane_state->tiling_info,
                        &plane_state->plane_size,
                        plane_state->rotation,
                        NULL,
                        false);
        if (mi->funcs->set_blank)
                mi->funcs->set_blank(mi, pipe_ctx->plane_state->visible);

        if (dc->config.gpu_vm_support)
                mi->funcs->mem_input_program_pte_vm(
                                pipe_ctx->plane_res.mi,
                                plane_state->format,
                                &plane_state->tiling_info,
                                plane_state->rotation);

        /* Moved programming gamma from dc to hwss */
        if (pipe_ctx->plane_state->update_flags.bits.full_update ||
                        pipe_ctx->plane_state->update_flags.bits.in_transfer_func_change ||
                        pipe_ctx->plane_state->update_flags.bits.gamma_change)
                dc->hwss.set_input_transfer_func(pipe_ctx, pipe_ctx->plane_state);

        if (pipe_ctx->plane_state->update_flags.bits.full_update)
                dc->hwss.set_output_transfer_func(pipe_ctx, pipe_ctx->stream);

        DC_LOG_SURFACE(
                        "Pipe:%d %p: addr hi:0x%x, "
                        "addr low:0x%x, "
                        "src: %d, %d, %d,"
                        " %d; dst: %d, %d, %d, %d;"
                        "clip: %d, %d, %d, %d\n",
                        pipe_ctx->pipe_idx,
                        (void *) pipe_ctx->plane_state,
                        pipe_ctx->plane_state->address.grph.addr.high_part,
                        pipe_ctx->plane_state->address.grph.addr.low_part,
                        pipe_ctx->plane_state->src_rect.x,
                        pipe_ctx->plane_state->src_rect.y,
                        pipe_ctx->plane_state->src_rect.width,
                        pipe_ctx->plane_state->src_rect.height,
                        pipe_ctx->plane_state->dst_rect.x,
                        pipe_ctx->plane_state->dst_rect.y,
                        pipe_ctx->plane_state->dst_rect.width,
                        pipe_ctx->plane_state->dst_rect.height,
                        pipe_ctx->plane_state->clip_rect.x,
                        pipe_ctx->plane_state->clip_rect.y,
                        pipe_ctx->plane_state->clip_rect.width,
                        pipe_ctx->plane_state->clip_rect.height);

        DC_LOG_SURFACE(
                        "Pipe %d: width, height, x, y\n"
                        "viewport:%d, %d, %d, %d\n"
                        "recout:  %d, %d, %d, %d\n",
                        pipe_ctx->pipe_idx,
                        pipe_ctx->plane_res.scl_data.viewport.width,
                        pipe_ctx->plane_res.scl_data.viewport.height,
                        pipe_ctx->plane_res.scl_data.viewport.x,
                        pipe_ctx->plane_res.scl_data.viewport.y,
                        pipe_ctx->plane_res.scl_data.recout.width,
                        pipe_ctx->plane_res.scl_data.recout.height,
                        pipe_ctx->plane_res.scl_data.recout.x,
                        pipe_ctx->plane_res.scl_data.recout.y);
}

static void dce110_apply_ctx_for_surface(
                struct dc *dc,
                const struct dc_stream_state *stream,
                int num_planes,
                struct dc_state *context)
{
        int i;

        if (num_planes == 0)
                return;

        for (i = 0; i < dc->res_pool->pipe_count; i++) {
                struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
                struct pipe_ctx *old_pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[i];

                if (stream == pipe_ctx->stream) {
                        if (!pipe_ctx->top_pipe &&
                                (pipe_ctx->plane_state || old_pipe_ctx->plane_state))
                                dc->hwss.pipe_control_lock(dc, pipe_ctx, true);
                }
        }

        for (i = 0; i < dc->res_pool->pipe_count; i++) {
                struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];

                if (pipe_ctx->stream != stream)
                        continue;

                /* Need to allocate mem before program front end for Fiji */
                pipe_ctx->plane_res.mi->funcs->allocate_mem_input(
                                pipe_ctx->plane_res.mi,
                                pipe_ctx->stream->timing.h_total,
                                pipe_ctx->stream->timing.v_total,
                                pipe_ctx->stream->timing.pix_clk_khz,
                                context->stream_count);

                dce110_program_front_end_for_pipe(dc, pipe_ctx);

                dc->hwss.update_plane_addr(dc, pipe_ctx);

                program_surface_visibility(dc, pipe_ctx);

        }

        for (i = 0; i < dc->res_pool->pipe_count; i++) {
                struct pipe_ctx *pipe_ctx = &context->res_ctx.pipe_ctx[i];
                struct pipe_ctx *old_pipe_ctx = &dc->current_state->res_ctx.pipe_ctx[i];

                if ((stream == pipe_ctx->stream) &&
                        (!pipe_ctx->top_pipe) &&
                        (pipe_ctx->plane_state || old_pipe_ctx->plane_state))
                        dc->hwss.pipe_control_lock(dc, pipe_ctx, false);
        }
}

static void dce110_power_down_fe(struct dc *dc, struct pipe_ctx *pipe_ctx)
{
        int fe_idx = pipe_ctx->plane_res.mi ?
                pipe_ctx->plane_res.mi->inst : pipe_ctx->pipe_idx;

        /* Do not power down fe when stream is active on dce*/
        if (dc->current_state->res_ctx.pipe_ctx[fe_idx].stream)
                return;

        dc->hwss.enable_display_power_gating(
                dc, fe_idx, dc->ctx->dc_bios, PIPE_GATING_CONTROL_ENABLE);

        dc->res_pool->transforms[fe_idx]->funcs->transform_reset(
                                dc->res_pool->transforms[fe_idx]);
}

static void dce110_wait_for_mpcc_disconnect(
                struct dc *dc,
                struct resource_pool *res_pool,
                struct pipe_ctx *pipe_ctx)
{
        /* do nothing*/
}

static void program_csc_matrix(struct pipe_ctx *pipe_ctx,
                enum dc_color_space colorspace,
                uint16_t *matrix)
{
        int i;
        struct out_csc_color_matrix tbl_entry;

        if (pipe_ctx->stream->csc_color_matrix.enable_adjustment
                                == true) {
                        enum dc_color_space color_space =
                                pipe_ctx->stream->output_color_space;

                        //uint16_t matrix[12];
                        for (i = 0; i < 12; i++)
                                tbl_entry.regval[i] = pipe_ctx->stream->csc_color_matrix.matrix[i];

                        tbl_entry.color_space = color_space;
                        //tbl_entry.regval = matrix;
                        pipe_ctx->plane_res.xfm->funcs->opp_set_csc_adjustment(pipe_ctx->plane_res.xfm, &tbl_entry);
        }
}

static
void dce110_set_cursor_position(struct pipe_ctx *pipe_ctx)
{
        struct dc_cursor_position pos_cpy = pipe_ctx->stream->cursor_position;
        struct input_pixel_processor *ipp = pipe_ctx->plane_res.ipp;
        struct mem_input *mi = pipe_ctx->plane_res.mi;
        struct dc_cursor_mi_param param = {
                .pixel_clk_khz = pipe_ctx->stream->timing.pix_clk_khz,
                .ref_clk_khz = pipe_ctx->stream->ctx->dc->res_pool->ref_clock_inKhz,
                .viewport = pipe_ctx->plane_res.scl_data.viewport,
                .h_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.horz,
                .v_scale_ratio = pipe_ctx->plane_res.scl_data.ratios.vert,
                .rotation = pipe_ctx->plane_state->rotation,
                .mirror = pipe_ctx->plane_state->horizontal_mirror
        };

        if (pipe_ctx->plane_state->address.type
                        == PLN_ADDR_TYPE_VIDEO_PROGRESSIVE)
                pos_cpy.enable = false;

        if (pipe_ctx->top_pipe && pipe_ctx->plane_state != pipe_ctx->top_pipe->plane_state)
                pos_cpy.enable = false;

        if (ipp->funcs->ipp_cursor_set_position)
                ipp->funcs->ipp_cursor_set_position(ipp, &pos_cpy, &param);
        if (mi->funcs->set_cursor_position)
                mi->funcs->set_cursor_position(mi, &pos_cpy, &param);
}

static
void dce110_set_cursor_attribute(struct pipe_ctx *pipe_ctx)
{
        struct dc_cursor_attributes *attributes = &pipe_ctx->stream->cursor_attributes;

        if (pipe_ctx->plane_res.ipp &&
            pipe_ctx->plane_res.ipp->funcs->ipp_cursor_set_attributes)
                pipe_ctx->plane_res.ipp->funcs->ipp_cursor_set_attributes(
                                pipe_ctx->plane_res.ipp, attributes);

        if (pipe_ctx->plane_res.mi &&
            pipe_ctx->plane_res.mi->funcs->set_cursor_attributes)
                pipe_ctx->plane_res.mi->funcs->set_cursor_attributes(
                                pipe_ctx->plane_res.mi, attributes);

        if (pipe_ctx->plane_res.xfm &&
            pipe_ctx->plane_res.xfm->funcs->set_cursor_attributes)
                pipe_ctx->plane_res.xfm->funcs->set_cursor_attributes(
                                pipe_ctx->plane_res.xfm, attributes);
}

static void ready_shared_resources(struct dc *dc, struct dc_state *context) {}

static void optimize_shared_resources(struct dc *dc) {}

static const struct hw_sequencer_funcs dce110_funcs = {
        .program_gamut_remap = program_gamut_remap,
        .program_csc_matrix = program_csc_matrix,
        .init_hw = init_hw,
        .apply_ctx_to_hw = dce110_apply_ctx_to_hw,
        .apply_ctx_for_surface = dce110_apply_ctx_for_surface,
        .update_plane_addr = update_plane_addr,
        .update_pending_status = dce110_update_pending_status,
        .set_input_transfer_func = dce110_set_input_transfer_func,
        .set_output_transfer_func = dce110_set_output_transfer_func,
        .power_down = dce110_power_down,
        .enable_accelerated_mode = dce110_enable_accelerated_mode,
        .enable_timing_synchronization = dce110_enable_timing_synchronization,
        .enable_per_frame_crtc_position_reset = dce110_enable_per_frame_crtc_position_reset,
        .update_info_frame = dce110_update_info_frame,
        .enable_stream = dce110_enable_stream,
        .disable_stream = dce110_disable_stream,
        .unblank_stream = dce110_unblank_stream,
        .blank_stream = dce110_blank_stream,
        .enable_audio_stream = dce110_enable_audio_stream,
        .disable_audio_stream = dce110_disable_audio_stream,
        .enable_display_pipe_clock_gating = enable_display_pipe_clock_gating,
        .enable_display_power_gating = dce110_enable_display_power_gating,
        .disable_plane = dce110_power_down_fe,
        .pipe_control_lock = dce_pipe_control_lock,
        .set_bandwidth = dce110_set_bandwidth,
        .set_drr = set_drr,
        .get_position = get_position,
        .set_static_screen_control = set_static_screen_control,
        .reset_hw_ctx_wrap = dce110_reset_hw_ctx_wrap,
        .enable_stream_timing = dce110_enable_stream_timing,
        .setup_stereo = NULL,
        .set_avmute = dce110_set_avmute,
        .wait_for_mpcc_disconnect = dce110_wait_for_mpcc_disconnect,
        .ready_shared_resources = ready_shared_resources,
        .optimize_shared_resources = optimize_shared_resources,
        .pplib_apply_display_requirements = pplib_apply_display_requirements,
        .edp_backlight_control = hwss_edp_backlight_control,
        .edp_power_control = hwss_edp_power_control,
        .edp_wait_for_hpd_ready = hwss_edp_wait_for_hpd_ready,
        .set_cursor_position = dce110_set_cursor_position,
        .set_cursor_attribute = dce110_set_cursor_attribute
};

void dce110_hw_sequencer_construct(struct dc *dc)
{
        dc->hwss = dce110_funcs;
}