#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: rt2860.c,v 1.36 2021/06/16 00:21:18 riastradh Exp $");
#include <sys/param.h>
#include <sys/sockio.h>
#include <sys/sysctl.h>
#include <sys/mbuf.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/queue.h>
#include <sys/callout.h>
#include <sys/module.h>
#include <sys/conf.h>
#include <sys/device.h>
#include <sys/endian.h>
#include <sys/cprng.h>
#include <sys/bus.h>
#include <sys/intr.h>
#include <net/bpf.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_ether.h>
#include <net/if_media.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_amrr.h>
#include <net80211/ieee80211_radiotap.h>
#include <dev/firmload.h>
#include <dev/ic/rt2860var.h>
#include <dev/ic/rt2860reg.h>
#include <dev/pci/pcidevs.h>
#ifdef RAL_DEBUG
#define DPRINTF(x) do { if (rt2860_debug > 0) printf x; } while (0)
#define DPRINTFN(n, x) do { if (rt2860_debug >= (n)) printf x; } while (0)
int rt2860_debug = 0;
#else
#define DPRINTF(x)
#define DPRINTFN(n, x)
#endif
#define MAXQS 6
static void rt2860_attachhook(device_t);
static bool rt2860_suspend(device_t self, const pmf_qual_t *qual);
static bool rt2860_wakeup(device_t self, const pmf_qual_t *qual);
static int rt2860_alloc_tx_ring(struct rt2860_softc *,
struct rt2860_tx_ring *);
static void rt2860_reset_tx_ring(struct rt2860_softc *,
struct rt2860_tx_ring *);
static void rt2860_free_tx_ring(struct rt2860_softc *,
struct rt2860_tx_ring *);
static int rt2860_alloc_tx_pool(struct rt2860_softc *);
static void rt2860_free_tx_pool(struct rt2860_softc *);
static int rt2860_alloc_rx_ring(struct rt2860_softc *,
struct rt2860_rx_ring *);
static void rt2860_reset_rx_ring(struct rt2860_softc *,
struct rt2860_rx_ring *);
static void rt2860_free_rx_ring(struct rt2860_softc *,
struct rt2860_rx_ring *);
static struct ieee80211_node *rt2860_node_alloc(struct ieee80211_node_table *);
static int rt2860_media_change(struct ifnet *);
static void rt2860_iter_func(void *, struct ieee80211_node *);
static void rt2860_updatestats(struct rt2860_softc *);
static void rt2860_update_promisc(struct ifnet *);
static void rt2860_newassoc(struct ieee80211_node *,
int);
#ifdef notyet
static int rt2860_ampdu_rx_start(struct ieee80211com *,
struct ieee80211_node *, uint8_t);
static void rt2860_ampdu_rx_stop(struct ieee80211com *,
struct ieee80211_node *, uint8_t);
#endif
static int rt2860_newstate(struct ieee80211com *, enum ieee80211_state,
int);
static uint16_t rt3090_efuse_read_2(struct rt2860_softc *, uint16_t);
static uint16_t rt2860_eeprom_read_2(struct rt2860_softc *, uint16_t);
static void rt2860_intr_coherent(struct rt2860_softc *);
static void rt2860_drain_stats_fifo(struct rt2860_softc *);
static void rt2860_tx_intr(struct rt2860_softc *, int);
static void rt2860_rx_intr(struct rt2860_softc *);
static void rt2860_tbtt_intr(struct rt2860_softc *);
static void rt2860_gp_intr(struct rt2860_softc *);
static int rt2860_tx(struct rt2860_softc *, struct mbuf **,
struct ieee80211_node *);
static void rt2860_start(struct ifnet *);
static void rt2860_watchdog(struct ifnet *);
static int rt2860_ioctl(struct ifnet *, u_long, void *);
static void rt2860_mcu_bbp_write(struct rt2860_softc *, uint8_t, uint8_t);
static uint8_t rt2860_mcu_bbp_read(struct rt2860_softc *, uint8_t);
static void rt2860_rf_write(struct rt2860_softc *, uint8_t, uint32_t);
static uint8_t rt3090_rf_read(struct rt2860_softc *, uint8_t);
static void rt3090_rf_write(struct rt2860_softc *, uint8_t, uint8_t);
static int rt2860_mcu_cmd(struct rt2860_softc *, uint8_t, uint16_t, int);
static void rt2860_enable_mrr(struct rt2860_softc *);
static void rt2860_set_txpreamble(struct rt2860_softc *);
static void rt2860_set_basicrates(struct rt2860_softc *);
static void rt2860_select_chan_group(struct rt2860_softc *, int);
static void rt2860_set_chan(struct rt2860_softc *, u_int);
static void rt3090_set_chan(struct rt2860_softc *, u_int);
static void rt5390_set_chan(struct rt2860_softc *, u_int);
static void rt3090_rf_init(struct rt2860_softc *);
static void rt5390_rf_init(struct rt2860_softc *);
static void rt3090_rf_wakeup(struct rt2860_softc *);
static void rt5390_rf_wakeup(struct rt2860_softc *);
static int rt3090_filter_calib(struct rt2860_softc *, uint8_t, uint8_t,
uint8_t *);
static void rt3090_rf_setup(struct rt2860_softc *);
static void rt2860_set_leds(struct rt2860_softc *, uint16_t);
static void rt2860_set_gp_timer(struct rt2860_softc *, int);
static void rt2860_set_bssid(struct rt2860_softc *, const uint8_t *);
static void rt2860_set_macaddr(struct rt2860_softc *, const uint8_t *);
static void rt2860_updateslot(struct ifnet *);
static void rt2860_updateprot(struct ieee80211com *);
static int rt2860_updateedca(struct ieee80211com *);
#ifdef HW_CRYPTO
static int rt2860_set_key(struct ieee80211com *,
const struct ieee80211_key *, const uint8_t *);
static int rt2860_delete_key(struct ieee80211com *,
const struct ieee80211_key *);
#endif
static int8_t rt2860_rssi2dbm(struct rt2860_softc *, uint8_t, uint8_t);
static const char * rt2860_get_rf(uint32_t);
static int rt2860_read_eeprom(struct rt2860_softc *);
static int rt2860_bbp_init(struct rt2860_softc *);
static int rt5390_bbp_init(struct rt2860_softc *);
static int rt2860_txrx_enable(struct rt2860_softc *);
static int rt2860_init(struct ifnet *);
static void rt2860_stop(struct ifnet *, int);
static int rt2860_load_microcode(struct rt2860_softc *);
#if 0
static void rt2860_calib(struct rt2860_softc *);
#endif
static void rt3090_set_rx_antenna(struct rt2860_softc *, int);
static void rt2860_switch_chan(struct rt2860_softc *,
struct ieee80211_channel *);
#ifndef IEEE80211_STA_ONLY
static int rt2860_setup_beacon(struct rt2860_softc *);
#endif
static void rt2860_enable_tsf_sync(struct rt2860_softc *);
static void rt2860_softintr(void *);
static const struct {
uint32_t reg;
uint32_t val;
} rt2860_def_mac[] = {
RT2860_DEF_MAC
};
static const struct {
uint8_t reg;
uint8_t val;
} rt2860_def_bbp[] = {
RT2860_DEF_BBP
}, rt5390_def_bbp[] = {
RT5390_DEF_BBP
};
static const struct rfprog {
uint8_t chan;
uint32_t r1, r2, r3, r4;
} rt2860_rf2850[] = {
RT2860_RF2850
};
static const struct {
uint8_t n, r, k;
} rt3090_freqs[] = {
RT3070_RF3052
};
static const struct {
uint8_t reg;
uint8_t val;
} rt3090_def_rf[] = {
RT3070_DEF_RF
}, rt3572_def_rf[] = {
RT3572_DEF_RF
}, rt5390_def_rf[] = {
RT5390_DEF_RF
}, rt5392_def_rf[] = {
RT5392_DEF_RF
};
int
rt2860_attach(void *xsc, int id)
{
struct rt2860_softc *sc = xsc;
struct ieee80211com *ic = &sc->sc_ic;
int qid, ntries, error;
uint32_t tmp;
sc->amrr.amrr_min_success_threshold = 1;
sc->amrr.amrr_max_success_threshold = 15;
for (ntries = 0; ntries < 100; ntries++) {
tmp = RAL_READ(sc, RT2860_ASIC_VER_ID);
if (tmp != 0 && tmp != 0xffffffff)
break;
DELAY(10);
}
if (ntries == 100) {
aprint_error_dev(sc->sc_dev,
"timeout waiting for NIC to initialize\n");
return ETIMEDOUT;
}
sc->mac_ver = tmp >> 16;
sc->mac_rev = tmp & 0xffff;
if (sc->mac_ver != 0x2860 &&
(id == PCI_PRODUCT_RALINK_RT2890 ||
id == PCI_PRODUCT_RALINK_RT2790 ||
id == PCI_PRODUCT_AWT_RT2890))
sc->sc_flags |= RT2860_ADVANCED_PS;
rt2860_read_eeprom(sc);
aprint_normal_dev(sc->sc_dev, "802.11 address %s\n",
ether_sprintf(ic->ic_myaddr));
aprint_normal_dev(sc->sc_dev, "MAC/BBP RT%X (rev 0x%04X), "
"RF %s (MIMO %dT%dR)\n",
sc->mac_ver, sc->mac_rev, rt2860_get_rf(sc->rf_rev),
sc->ntxchains, sc->nrxchains);
sc->sc_soft_ih = softint_establish(SOFTINT_NET, rt2860_softintr, sc);
if (sc->sc_soft_ih == NULL) {
aprint_error_dev(sc->sc_dev, "could not establish softint\n");
error = EINVAL;
goto fail0;
}
for (qid = 0; qid < MAXQS; qid++) {
if ((error = rt2860_alloc_tx_ring(sc, &sc->txq[qid])) != 0) {
aprint_error_dev(sc->sc_dev,
"could not allocate Tx ring %d\n", qid);
goto fail1;
}
}
if ((error = rt2860_alloc_rx_ring(sc, &sc->rxq)) != 0) {
aprint_error_dev(sc->sc_dev, "could not allocate Rx ring\n");
goto fail1;
}
if ((error = rt2860_alloc_tx_pool(sc)) != 0) {
aprint_error_dev(sc->sc_dev, "could not allocate Tx pool\n");
goto fail2;
}
sc->mgtqid = (sc->mac_ver == 0x2860 && sc->mac_rev == 0x0100) ?
WME_AC_VO : 5;
config_mountroot(sc->sc_dev, rt2860_attachhook);
return 0;
fail2: rt2860_free_rx_ring(sc, &sc->rxq);
fail1: while (--qid >= 0)
rt2860_free_tx_ring(sc, &sc->txq[qid]);
fail0: softint_disestablish(sc->sc_soft_ih);
sc->sc_soft_ih = NULL;
return error;
}
static int
firmware_load(const char *dname, const char *iname, uint8_t **ucodep,
size_t *sizep)
{
firmware_handle_t fh;
int error;
if ((error = firmware_open(dname, iname, &fh)) != 0)
return (error);
*sizep = firmware_get_size(fh);
if ((*ucodep = firmware_malloc(*sizep)) == NULL) {
firmware_close(fh);
return (ENOMEM);
}
if ((error = firmware_read(fh, 0, *ucodep, *sizep)) != 0)
firmware_free(*ucodep, *sizep);
firmware_close(fh);
return (error);
}
static void
rt2860_attachhook(device_t self)
{
struct rt2860_softc *sc = device_private(self);
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = &sc->sc_if;
int i, error;
error = firmware_load("ral", "ral-rt2860", &sc->ucode, &sc->ucsize);
if (error != 0) {
aprint_error_dev(sc->sc_dev,
"error %d, could not read firmware file %s\n",
error, "ral-rt2860");
return;
}
ic->ic_ifp = ifp;
ic->ic_phytype = IEEE80211_T_OFDM;
ic->ic_opmode = IEEE80211_M_STA;
ic->ic_state = IEEE80211_S_INIT;
ic->ic_caps =
IEEE80211_C_MONITOR |
#ifndef IEEE80211_STA_ONLY
IEEE80211_C_IBSS |
IEEE80211_C_HOSTAP |
#ifdef IEEE80211_C_APPMGT
IEEE80211_C_APPMGT |
#endif
#endif
IEEE80211_C_WDS |
IEEE80211_C_WME |
IEEE80211_C_SHPREAMBLE |
IEEE80211_C_SHSLOT |
#ifdef HW_CRYPTO
IEEE80211_C_WEP |
#endif
IEEE80211_C_WPA;
if (sc->rf_rev == RT2860_RF_2750 || sc->rf_rev == RT2860_RF_2850) {
ic->ic_sup_rates[IEEE80211_MODE_11A] =
ieee80211_std_rateset_11a;
for (i = 14; i < (int)__arraycount(rt2860_rf2850); i++) {
uint8_t chan = rt2860_rf2850[i].chan;
ic->ic_channels[chan].ic_freq =
ieee80211_ieee2mhz(chan, IEEE80211_CHAN_5GHZ);
ic->ic_channels[chan].ic_flags = IEEE80211_CHAN_A;
}
}
ic->ic_sup_rates[IEEE80211_MODE_11B] = ieee80211_std_rateset_11b;
ic->ic_sup_rates[IEEE80211_MODE_11G] = ieee80211_std_rateset_11g;
for (i = 1; i <= 14; i++) {
ic->ic_channels[i].ic_freq =
ieee80211_ieee2mhz(i, IEEE80211_CHAN_2GHZ);
ic->ic_channels[i].ic_flags =
IEEE80211_CHAN_CCK | IEEE80211_CHAN_OFDM |
IEEE80211_CHAN_DYN | IEEE80211_CHAN_2GHZ;
}
ic->ic_max_aid = uimin(IEEE80211_AID_MAX, RT2860_WCID_MAX);
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_init = rt2860_init;
ifp->if_ioctl = rt2860_ioctl;
ifp->if_start = rt2860_start;
ifp->if_stop = rt2860_stop;
ifp->if_watchdog = rt2860_watchdog;
IFQ_SET_READY(&ifp->if_snd);
memcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ);
if_initialize(ifp);
ieee80211_ifattach(ic);
ifp->if_percpuq = if_percpuq_create(ifp);
if_register(ifp);
ic->ic_node_alloc = rt2860_node_alloc;
ic->ic_newassoc = rt2860_newassoc;
#ifdef notyet
ic->ic_ampdu_rx_start = rt2860_ampdu_rx_start;
ic->ic_ampdu_rx_stop = rt2860_ampdu_rx_stop;
#endif
ic->ic_updateslot = rt2860_updateslot;
ic->ic_wme.wme_update = rt2860_updateedca;
#ifdef HW_CRYPTO
ic->ic_crypto.cs_key_set = rt2860_set_key;
ic->ic_crypto.cs_key_delete = rt2860_delete_key;
#endif
sc->sc_newstate = ic->ic_newstate;
ic->ic_newstate = rt2860_newstate;
ieee80211_media_init(ic, rt2860_media_change, ieee80211_media_status);
bpf_attach2(ifp, DLT_IEEE802_11_RADIO,
sizeof (struct ieee80211_frame) + 64, &sc->sc_drvbpf);
sc->sc_rxtap_len = roundup(sizeof(sc->sc_rxtap), sizeof(u_int32_t));
sc->sc_rxtap.wr_ihdr.it_len = htole16(sc->sc_rxtap_len);
sc->sc_rxtap.wr_ihdr.it_present = htole32(RT2860_RX_RADIOTAP_PRESENT);
sc->sc_txtap_len = roundup(sizeof(sc->sc_txtap), sizeof(u_int32_t));
sc->sc_txtap.wt_ihdr.it_len = htole16(sc->sc_txtap_len);
sc->sc_txtap.wt_ihdr.it_present = htole32(RT2860_TX_RADIOTAP_PRESENT);
ieee80211_announce(ic);
if (pmf_device_register(sc->sc_dev, rt2860_wakeup, rt2860_suspend))
pmf_class_network_register(sc->sc_dev, ifp);
else
aprint_error_dev(sc->sc_dev,
"couldn't establish power handler\n");
}
int
rt2860_detach(void *xsc)
{
struct rt2860_softc *sc = xsc;
struct ifnet *ifp = &sc->sc_if;
int qid;
pmf_device_deregister(sc->sc_dev);
rt2860_stop(ifp, 1);
ieee80211_ifdetach(&sc->sc_ic);
if_detach(ifp);
for (qid = 0; qid < MAXQS; qid++)
rt2860_free_tx_ring(sc, &sc->txq[qid]);
rt2860_free_rx_ring(sc, &sc->rxq);
rt2860_free_tx_pool(sc);
if (sc->sc_soft_ih != NULL) {
softint_disestablish(sc->sc_soft_ih);
sc->sc_soft_ih = NULL;
}
if (sc->ucode != NULL)
firmware_free(sc->ucode, sc->ucsize);
return 0;
}
static bool
rt2860_suspend(device_t self, const pmf_qual_t *qual)
{
struct rt2860_softc *sc = device_private(self);
struct ifnet *ifp = &sc->sc_if;
if (ifp->if_flags & IFF_RUNNING)
rt2860_stop(ifp, 1);
return true;
}
static bool
rt2860_wakeup(device_t self, const pmf_qual_t *qual)
{
struct rt2860_softc *sc = device_private(self);
struct ifnet *ifp = &sc->sc_if;
int s;
s = splnet();
if (ifp->if_flags & IFF_UP)
rt2860_init(ifp);
splx(s);
return true;
}
static int
rt2860_alloc_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring)
{
int nsegs, size, error;
size = RT2860_TX_RING_COUNT * sizeof (struct rt2860_txd);
error = bus_dmamap_create(sc->sc_dmat, size, 1, size, 0,
BUS_DMA_NOWAIT, &ring->map);
if (error != 0) {
aprint_error_dev(sc->sc_dev, "could not create DMA map\n");
goto fail;
}
error = bus_dmamem_alloc(sc->sc_dmat, size, 16, 0, &ring->seg, 1,
&nsegs, BUS_DMA_NOWAIT);
if (error != 0) {
aprint_error_dev(sc->sc_dev,
"could not allocate DMA memory\n");
goto fail;
}
error = bus_dmamem_map(sc->sc_dmat, &ring->seg, nsegs, size,
(void **)&ring->txd, BUS_DMA_NOWAIT);
if (error != 0) {
aprint_error_dev(sc->sc_dev, "can't map DMA memory\n");
goto fail;
}
error = bus_dmamap_load(sc->sc_dmat, ring->map, ring->txd, size, NULL,
BUS_DMA_NOWAIT);
if (error != 0) {
aprint_error_dev(sc->sc_dev, "could not load DMA map\n");
goto fail;
}
bus_dmamap_sync(sc->sc_dmat, ring->map, 0, size, BUS_DMASYNC_PREWRITE);
ring->paddr = ring->map->dm_segs[0].ds_addr;
return 0;
fail: rt2860_free_tx_ring(sc, ring);
return error;
}
static void
rt2860_reset_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring)
{
struct rt2860_tx_data *data;
int i;
for (i = 0; i < RT2860_TX_RING_COUNT; i++) {
if ((data = ring->data[i]) == NULL)
continue;
if (data->ni != NULL) {
ieee80211_free_node(data->ni);
data->ni = NULL;
}
if (data->m != NULL) {
bus_dmamap_sync(sc->sc_dmat, data->map, 0,
data->map->dm_mapsize, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_dmat, data->map);
m_freem(data->m);
data->m = NULL;
}
SLIST_INSERT_HEAD(&sc->data_pool, data, next);
ring->data[i] = NULL;
}
ring->queued = 0;
ring->cur = ring->next = 0;
}
static void
rt2860_free_tx_ring(struct rt2860_softc *sc, struct rt2860_tx_ring *ring)
{
struct rt2860_tx_data *data;
int i;
if (ring->txd != NULL) {
bus_dmamap_sync(sc->sc_dmat, ring->map, 0,
ring->map->dm_mapsize, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_dmat, ring->map);
bus_dmamem_unmap(sc->sc_dmat, (void *)ring->txd,
RT2860_TX_RING_COUNT * sizeof (struct rt2860_txd));
bus_dmamem_free(sc->sc_dmat, &ring->seg, 1);
}
if (ring->map != NULL)
bus_dmamap_destroy(sc->sc_dmat, ring->map);
for (i = 0; i < RT2860_TX_RING_COUNT; i++) {
if ((data = ring->data[i]) == NULL)
continue;
if (data->ni != NULL) {
ieee80211_free_node(data->ni);
data->ni = NULL;
}
if (data->m != NULL) {
bus_dmamap_sync(sc->sc_dmat, data->map, 0,
data->map->dm_mapsize, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_dmat, data->map);
m_freem(data->m);
data->m = NULL;
}
SLIST_INSERT_HEAD(&sc->data_pool, data, next);
ring->data[i] = NULL;
}
ring->queued = 0;
ring->cur = ring->next = 0;
}
static int
rt2860_alloc_tx_pool(struct rt2860_softc *sc)
{
char *vaddr;
bus_addr_t paddr;
int i, nsegs, size, error;
size = RT2860_TX_POOL_COUNT * RT2860_TXWI_DMASZ;
SLIST_INIT(&sc->data_pool);
error = bus_dmamap_create(sc->sc_dmat, size, 1, size, 0,
BUS_DMA_NOWAIT, &sc->txwi_map);
if (error != 0) {
aprint_error_dev(sc->sc_dev, "could not create DMA map\n");
goto fail;
}
error = bus_dmamem_alloc(sc->sc_dmat, size, PAGE_SIZE, 0,
&sc->txwi_seg, 1, &nsegs, BUS_DMA_NOWAIT);
if (error != 0) {
aprint_error_dev(sc->sc_dev,
"could not allocate DMA memory\n");
goto fail;
}
error = bus_dmamem_map(sc->sc_dmat, &sc->txwi_seg, nsegs, size,
&sc->txwi_vaddr, BUS_DMA_NOWAIT);
if (error != 0) {
aprint_error_dev(sc->sc_dev, "can't map DMA memory\n");
goto fail;
}
error = bus_dmamap_load(sc->sc_dmat, sc->txwi_map, sc->txwi_vaddr,
size, NULL, BUS_DMA_NOWAIT);
if (error != 0) {
aprint_error_dev(sc->sc_dev, "could not load DMA map\n");
goto fail;
}
bus_dmamap_sync(sc->sc_dmat, sc->txwi_map, 0, size,
BUS_DMASYNC_PREWRITE);
vaddr = sc->txwi_vaddr;
paddr = sc->txwi_map->dm_segs[0].ds_addr;
for (i = 0; i < RT2860_TX_POOL_COUNT; i++) {
struct rt2860_tx_data *data = &sc->data[i];
error = bus_dmamap_create(sc->sc_dmat, MCLBYTES,
RT2860_MAX_SCATTER, MCLBYTES, 0, BUS_DMA_NOWAIT,
&data->map);
if (error != 0) {
aprint_error_dev(sc->sc_dev,
"could not create DMA map\n");
goto fail;
}
data->txwi = (struct rt2860_txwi *)vaddr;
data->paddr = paddr;
vaddr += RT2860_TXWI_DMASZ;
paddr += RT2860_TXWI_DMASZ;
SLIST_INSERT_HEAD(&sc->data_pool, data, next);
}
return 0;
fail: rt2860_free_tx_pool(sc);
return error;
}
static void
rt2860_free_tx_pool(struct rt2860_softc *sc)
{
if (sc->txwi_vaddr != NULL) {
bus_dmamap_sync(sc->sc_dmat, sc->txwi_map, 0,
sc->txwi_map->dm_mapsize, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_dmat, sc->txwi_map);
bus_dmamem_unmap(sc->sc_dmat, sc->txwi_vaddr,
RT2860_TX_POOL_COUNT * RT2860_TXWI_DMASZ);
bus_dmamem_free(sc->sc_dmat, &sc->txwi_seg, 1);
}
if (sc->txwi_map != NULL)
bus_dmamap_destroy(sc->sc_dmat, sc->txwi_map);
while (!SLIST_EMPTY(&sc->data_pool)) {
struct rt2860_tx_data *data;
data = SLIST_FIRST(&sc->data_pool);
bus_dmamap_destroy(sc->sc_dmat, data->map);
SLIST_REMOVE_HEAD(&sc->data_pool, next);
}
}
static int
rt2860_alloc_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring)
{
int i, nsegs, size, error;
size = RT2860_RX_RING_COUNT * sizeof (struct rt2860_rxd);
error = bus_dmamap_create(sc->sc_dmat, size, 1, size, 0,
BUS_DMA_NOWAIT, &ring->map);
if (error != 0) {
aprint_error_dev(sc->sc_dev, "could not create DMA map\n");
goto fail;
}
error = bus_dmamem_alloc(sc->sc_dmat, size, 16, 0, &ring->seg, 1,
&nsegs, BUS_DMA_NOWAIT);
if (error != 0) {
aprint_error_dev(sc->sc_dev,
"could not allocate DMA memory\n");
goto fail;
}
error = bus_dmamem_map(sc->sc_dmat, &ring->seg, nsegs, size,
(void **)&ring->rxd, BUS_DMA_NOWAIT);
if (error != 0) {
aprint_error_dev(sc->sc_dev, "can't map DMA memory\n");
goto fail;
}
error = bus_dmamap_load(sc->sc_dmat, ring->map, ring->rxd, size, NULL,
BUS_DMA_NOWAIT);
if (error != 0) {
aprint_error_dev(sc->sc_dev, "could not load DMA map\n");
goto fail;
}
ring->paddr = ring->map->dm_segs[0].ds_addr;
for (i = 0; i < RT2860_RX_RING_COUNT; i++) {
struct rt2860_rx_data *data = &ring->data[i];
struct rt2860_rxd *rxd = &ring->rxd[i];
const char *msg;
error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, MCLBYTES,
0, BUS_DMA_NOWAIT, &data->map);
if (error != 0) {
aprint_error_dev(sc->sc_dev,
"could not create DMA map\n");
goto fail;
}
MGETHDR(data->m, M_DONTWAIT, MT_DATA);
if (data->m == NULL) {
msg = "allocate Rx mbuf";
goto fail1;
}
MCLGET(data->m, M_DONTWAIT);
if ((data->m->m_flags & M_EXT) == 0) {
msg = "allocate Rx mbuf cluster";
goto fail1;
}
error = bus_dmamap_load(sc->sc_dmat, data->map,
mtod(data->m, void *), MCLBYTES, NULL,
BUS_DMA_READ | BUS_DMA_NOWAIT);
if (error != 0) {
msg = "load DMA map";
fail1:
aprint_error_dev(sc->sc_dev, "could not %s\n", msg);
m_freem(data->m);
data->m = NULL;
error = ENOBUFS;
goto fail;
}
rxd->sdp0 = htole32(data->map->dm_segs[0].ds_addr);
rxd->sdl0 = htole16(MCLBYTES);
}
bus_dmamap_sync(sc->sc_dmat, ring->map, 0, size, BUS_DMASYNC_PREWRITE);
return 0;
fail: rt2860_free_rx_ring(sc, ring);
return error;
}
static void
rt2860_reset_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring)
{
int i;
for (i = 0; i < RT2860_RX_RING_COUNT; i++)
ring->rxd[i].sdl0 &= ~htole16(RT2860_RX_DDONE);
bus_dmamap_sync(sc->sc_dmat, ring->map, 0, ring->map->dm_mapsize,
BUS_DMASYNC_PREWRITE);
ring->cur = 0;
}
static void
rt2860_free_rx_ring(struct rt2860_softc *sc, struct rt2860_rx_ring *ring)
{
int i;
if (ring->rxd != NULL) {
bus_dmamap_sync(sc->sc_dmat, ring->map, 0,
ring->map->dm_mapsize, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_dmat, ring->map);
bus_dmamem_unmap(sc->sc_dmat, (void *)ring->rxd,
RT2860_RX_RING_COUNT * sizeof (struct rt2860_rxd));
bus_dmamem_free(sc->sc_dmat, &ring->seg, 1);
ring->rxd = NULL;
}
if (ring->map != NULL) {
bus_dmamap_destroy(sc->sc_dmat, ring->map);
ring->map = NULL;
}
for (i = 0; i < RT2860_RX_RING_COUNT; i++) {
struct rt2860_rx_data *data = &ring->data[i];
if (data->m != NULL) {
bus_dmamap_sync(sc->sc_dmat, data->map, 0,
data->map->dm_mapsize, BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->sc_dmat, data->map);
m_freem(data->m);
data->m = NULL;
}
if (data->map != NULL) {
bus_dmamap_destroy(sc->sc_dmat, data->map);
data->map = NULL;
}
}
}
static struct ieee80211_node *
rt2860_node_alloc(struct ieee80211_node_table *nt)
{
struct rt2860_node *rn = malloc(sizeof(*rn), M_80211_NODE,
M_NOWAIT | M_ZERO);
return rn ? &rn->ni : NULL;
}
static int
rt2860_media_change(struct ifnet *ifp)
{
struct rt2860_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
uint8_t rate, ridx;
int error;
error = ieee80211_media_change(ifp);
if (error != ENETRESET)
return error;
if (ic->ic_fixed_rate != -1) {
rate = ic->ic_sup_rates[ic->ic_curmode].
rs_rates[ic->ic_fixed_rate] & IEEE80211_RATE_VAL;
for (ridx = 0; ridx <= RT2860_RIDX_MAX; ridx++)
if (rt2860_rates[ridx].rate == rate)
break;
sc->fixed_ridx = ridx;
}
if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) ==
(IFF_UP | IFF_RUNNING)) {
rt2860_stop(ifp, 0);
rt2860_init(ifp);
}
return 0;
}
static void
rt2860_iter_func(void *arg, struct ieee80211_node *ni)
{
struct rt2860_softc *sc = arg;
uint8_t wcid = ((struct rt2860_node *)ni)->wcid;
ieee80211_amrr_choose(&sc->amrr, ni, &sc->amn[wcid]);
}
static void
rt2860_updatestats(struct rt2860_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
int s;
#ifndef IEEE80211_STA_ONLY
if (ic->ic_curmode != IEEE80211_M_STA) {
uint32_t tmp = RAL_READ(sc, RT2860_DEBUG);
if ((tmp & (1 << 29)) && (tmp & (1 << 7 | 1 << 5))) {
DPRINTF(("CTS-to-self livelock detected\n"));
RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_SRST);
RAL_BARRIER_WRITE(sc);
DELAY(1);
RAL_WRITE(sc, RT2860_MAC_SYS_CTRL,
RT2860_MAC_RX_EN | RT2860_MAC_TX_EN);
}
}
#endif
s = splnet();
if (ic->ic_opmode == IEEE80211_M_STA)
rt2860_iter_func(sc, ic->ic_bss);
#ifndef IEEE80211_STA_ONLY
else
ieee80211_iterate_nodes(&ic->ic_sta, rt2860_iter_func, sc);
#endif
splx(s);
}
static void
rt2860_newassoc(struct ieee80211_node *ni, int isnew)
{
struct rt2860_softc *sc = ni->ni_ic->ic_ifp->if_softc;
struct rt2860_node *rn = (void *)ni;
struct ieee80211_rateset *rs = &ni->ni_rates;
uint8_t rate, wcid = 0;
int ridx, i, j;
if (isnew && ni->ni_associd != 0) {
wcid = rn->wcid = IEEE80211_AID(ni->ni_associd);
RAL_WRITE_REGION_1(sc, RT2860_WCID_ENTRY(wcid),
ni->ni_macaddr, IEEE80211_ADDR_LEN);
}
DPRINTF(("new assoc isnew=%d addr=%s WCID=%d\n",
isnew, ether_sprintf(ni->ni_macaddr), wcid));
ieee80211_amrr_node_init(&sc->amrr, &sc->amn[wcid]);
ni->ni_txrate = 0;
for (i = 0; i < rs->rs_nrates; i++) {
rate = rs->rs_rates[i] & IEEE80211_RATE_VAL;
for (ridx = 0; ridx < RT2860_RIDX_MAX; ridx++)
if (rt2860_rates[ridx].rate == rate)
break;
rn->ridx[i] = ridx;
for (j = i; j >= 0; j--) {
if ((rs->rs_rates[j] & IEEE80211_RATE_BASIC) &&
rt2860_rates[rn->ridx[i]].phy ==
rt2860_rates[rn->ridx[j]].phy)
break;
}
if (j >= 0) {
rn->ctl_ridx[i] = rn->ridx[j];
} else {
rn->ctl_ridx[i] = rt2860_rates[ridx].ctl_ridx;
}
DPRINTF(("rate=0x%02x ridx=%d ctl_ridx=%d\n",
rs->rs_rates[i], rn->ridx[i], rn->ctl_ridx[i]));
}
}
#ifdef notyet
static int
rt2860_ampdu_rx_start(struct ieee80211com *ic, struct ieee80211_node *ni,
uint8_t tid)
{
struct rt2860_softc *sc = ic->ic_softc;
uint8_t wcid = ((struct rt2860_node *)ni)->wcid;
uint32_t tmp;
tmp = RAL_READ(sc, RT2860_WCID_ENTRY(wcid) + 4);
tmp |= (1 << tid) << 16;
RAL_WRITE(sc, RT2860_WCID_ENTRY(wcid) + 4, tmp);
return 0;
}
static void
rt2860_ampdu_rx_stop(struct ieee80211com *ic, struct ieee80211_node *ni,
uint8_t tid)
{
struct rt2860_softc *sc = ic->ic_softc;
uint8_t wcid = ((struct rt2860_node *)ni)->wcid;
uint32_t tmp;
tmp = RAL_READ(sc, RT2860_WCID_ENTRY(wcid) + 4);
tmp &= ~((1 << tid) << 16);
RAL_WRITE(sc, RT2860_WCID_ENTRY(wcid) + 4, tmp);
}
#endif
static int
rt2860_newstate(struct ieee80211com *ic, enum ieee80211_state nstate, int arg)
{
struct rt2860_softc *sc = ic->ic_ifp->if_softc;
enum ieee80211_state ostate;
uint32_t tmp;
ostate = ic->ic_state;
DPRINTF(("ostate = %d nstate = %d\n", ostate, nstate));
if (ostate == IEEE80211_S_RUN) {
rt2860_set_leds(sc, RT2860_LED_RADIO);
}
switch (nstate) {
case IEEE80211_S_INIT:
if (ostate == IEEE80211_S_RUN) {
tmp = RAL_READ(sc, RT2860_BCN_TIME_CFG);
RAL_WRITE(sc, RT2860_BCN_TIME_CFG,
tmp & ~(RT2860_BCN_TX_EN | RT2860_TSF_TIMER_EN |
RT2860_TBTT_TIMER_EN));
}
rt2860_set_gp_timer(sc, 0);
break;
case IEEE80211_S_SCAN:
rt2860_switch_chan(sc, ic->ic_curchan);
if (ostate != IEEE80211_S_SCAN)
rt2860_set_gp_timer(sc, 150);
break;
case IEEE80211_S_AUTH:
case IEEE80211_S_ASSOC:
rt2860_set_gp_timer(sc, 0);
rt2860_switch_chan(sc, ic->ic_curchan);
break;
case IEEE80211_S_RUN:
rt2860_set_gp_timer(sc, 0);
rt2860_switch_chan(sc, ic->ic_curchan);
if (ic->ic_opmode != IEEE80211_M_MONITOR) {
rt2860_updateslot(ic->ic_ifp);
rt2860_enable_mrr(sc);
rt2860_set_txpreamble(sc);
rt2860_set_basicrates(sc);
rt2860_set_bssid(sc, ic->ic_bss->ni_bssid);
}
#ifndef IEEE80211_STA_ONLY
if (ic->ic_opmode == IEEE80211_M_HOSTAP ||
ic->ic_opmode == IEEE80211_M_IBSS)
(void)rt2860_setup_beacon(sc);
#endif
if (ic->ic_opmode == IEEE80211_M_STA) {
rt2860_newassoc(ic->ic_bss, 1);
}
if (ic->ic_opmode != IEEE80211_M_MONITOR) {
rt2860_enable_tsf_sync(sc);
rt2860_set_gp_timer(sc, 500);
}
rt2860_set_leds(sc, RT2860_LED_RADIO |
(IEEE80211_IS_CHAN_2GHZ(ic->ic_bss->ni_chan) ?
RT2860_LED_LINK_2GHZ : RT2860_LED_LINK_5GHZ));
break;
}
return sc->sc_newstate(ic, nstate, arg);
}
static uint16_t
rt3090_efuse_read_2(struct rt2860_softc *sc, uint16_t addr)
{
uint32_t tmp;
uint16_t reg;
int ntries;
addr *= 2;
tmp = RAL_READ(sc, RT3070_EFUSE_CTRL);
tmp &= ~(RT3070_EFSROM_MODE_MASK | RT3070_EFSROM_AIN_MASK);
tmp |= (addr & ~0xf) << RT3070_EFSROM_AIN_SHIFT | RT3070_EFSROM_KICK;
RAL_WRITE(sc, RT3070_EFUSE_CTRL, tmp);
for (ntries = 0; ntries < 500; ntries++) {
tmp = RAL_READ(sc, RT3070_EFUSE_CTRL);
if (!(tmp & RT3070_EFSROM_KICK))
break;
DELAY(2);
}
if (ntries == 500)
return 0xffff;
if ((tmp & RT3070_EFUSE_AOUT_MASK) == RT3070_EFUSE_AOUT_MASK)
return 0xffff;
reg = RT3070_EFUSE_DATA3 - (addr & 0xc);
tmp = RAL_READ(sc, reg);
return (addr & 2) ? tmp >> 16 : tmp & 0xffff;
}
static uint16_t
rt2860_eeprom_read_2(struct rt2860_softc *sc, uint16_t addr)
{
uint32_t tmp;
uint16_t val;
int n;
RT2860_EEPROM_CTL(sc, 0);
RT2860_EEPROM_CTL(sc, RT2860_S);
RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C);
RT2860_EEPROM_CTL(sc, RT2860_S);
RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D);
RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D | RT2860_C);
RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D);
RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_D | RT2860_C);
RT2860_EEPROM_CTL(sc, RT2860_S);
RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C);
n = ((RAL_READ(sc, RT2860_PCI_EECTRL) & 0x30) == 0) ? 5 : 7;
for (; n >= 0; n--) {
RT2860_EEPROM_CTL(sc, RT2860_S |
(((addr >> n) & 1) << RT2860_SHIFT_D));
RT2860_EEPROM_CTL(sc, RT2860_S |
(((addr >> n) & 1) << RT2860_SHIFT_D) | RT2860_C);
}
RT2860_EEPROM_CTL(sc, RT2860_S);
val = 0;
for (n = 15; n >= 0; n--) {
RT2860_EEPROM_CTL(sc, RT2860_S | RT2860_C);
tmp = RAL_READ(sc, RT2860_PCI_EECTRL);
val |= ((tmp & RT2860_Q) >> RT2860_SHIFT_Q) << n;
RT2860_EEPROM_CTL(sc, RT2860_S);
}
RT2860_EEPROM_CTL(sc, 0);
RT2860_EEPROM_CTL(sc, RT2860_S);
RT2860_EEPROM_CTL(sc, 0);
RT2860_EEPROM_CTL(sc, RT2860_C);
return val;
}
static __inline uint16_t
rt2860_srom_read(struct rt2860_softc *sc, uint8_t addr)
{
return sc->sc_srom_read(sc, addr);
}
static void
rt2860_intr_coherent(struct rt2860_softc *sc)
{
uint32_t tmp;
DPRINTF(("Tx/Rx Coherent interrupt\n"));
tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG);
tmp &= ~(RT2860_TX_WB_DDONE | RT2860_RX_DMA_EN | RT2860_TX_DMA_EN);
RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp);
(void)rt2860_txrx_enable(sc);
}
static void
rt2860_drain_stats_fifo(struct rt2860_softc *sc)
{
struct ifnet *ifp = &sc->sc_if;
struct ieee80211_amrr_node *amn;
uint32_t stat;
uint8_t wcid, mcs, pid;
while ((stat = RAL_READ(sc, RT2860_TX_STAT_FIFO)) & RT2860_TXQ_VLD) {
DPRINTFN(4, ("tx stat 0x%08x\n", stat));
wcid = (stat >> RT2860_TXQ_WCID_SHIFT) & 0xff;
if (!(stat & RT2860_TXQ_ACKREQ) || wcid == 0xff)
continue;
amn = &sc->amn[wcid];
amn->amn_txcnt++;
if (stat & RT2860_TXQ_OK) {
mcs = (stat >> RT2860_TXQ_MCS_SHIFT) & 0x7f;
pid = (stat >> RT2860_TXQ_PID_SHIFT) & 0xf;
if (mcs + 1 != pid)
amn->amn_retrycnt++;
} else {
amn->amn_retrycnt++;
if_statinc(ifp, if_oerrors);
}
}
}
static void
rt2860_tx_intr(struct rt2860_softc *sc, int qid)
{
struct ifnet *ifp = &sc->sc_if;
struct rt2860_tx_ring *ring = &sc->txq[qid];
uint32_t hw;
int s;
s = splnet();
rt2860_drain_stats_fifo(sc);
hw = RAL_READ(sc, RT2860_TX_DTX_IDX(qid));
DPRINTF(("%s: tx mbuf %#x\n", __func__, hw));
while (ring->next != hw) {
struct rt2860_tx_data *data = ring->data[ring->next];
if (data != NULL) {
bus_dmamap_sync(sc->sc_dmat, data->map, 0,
data->map->dm_mapsize, BUS_DMASYNC_POSTWRITE);
bus_dmamap_unload(sc->sc_dmat, data->map);
m_freem(data->m);
data->m = NULL;
ieee80211_free_node(data->ni);
data->ni = NULL;
SLIST_INSERT_HEAD(&sc->data_pool, data, next);
ring->data[ring->next] = NULL;
if_statinc(ifp, if_opackets);
}
ring->queued--;
ring->next = (ring->next + 1) % RT2860_TX_RING_COUNT;
}
sc->sc_tx_timer = 0;
if (ring->queued <= RT2860_TX_RING_ONEMORE)
sc->qfullmsk &= ~(1 << qid);
ifp->if_flags &= ~IFF_OACTIVE;
rt2860_start(ifp);
splx(s);
}
static __inline uint8_t
rt2860_maxrssi_chain(struct rt2860_softc *sc, const struct rt2860_rxwi *rxwi)
{
uint8_t rxchain = 0;
if (sc->nrxchains > 1) {
if (rxwi->rssi[1] > rxwi->rssi[rxchain])
rxchain = 1;
if (sc->nrxchains > 2)
if (rxwi->rssi[2] > rxwi->rssi[rxchain])
rxchain = 2;
}
return rxchain;
}
static void
rt2860_rx_intr(struct rt2860_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ifnet *ifp = &sc->sc_if;
struct ieee80211_frame *wh;
struct ieee80211_node *ni;
struct mbuf *m, *m1;
uint32_t hw;
uint8_t ant, rssi;
int error, s;
struct rt2860_rx_radiotap_header *tap;
uint16_t phy;
hw = RAL_READ(sc, RT2860_FS_DRX_IDX) & 0xfff;
DPRINTF(("%s: rx mbuf %#x\n", __func__, hw));
while (sc->rxq.cur != hw) {
struct rt2860_rx_data *data = &sc->rxq.data[sc->rxq.cur];
struct rt2860_rxd *rxd = &sc->rxq.rxd[sc->rxq.cur];
struct rt2860_rxwi *rxwi;
bus_dmamap_sync(sc->sc_dmat, sc->rxq.map,
sc->rxq.cur * sizeof (struct rt2860_rxd),
sizeof (struct rt2860_rxd), BUS_DMASYNC_POSTREAD);
if (__predict_false(!(rxd->sdl0 & htole16(RT2860_RX_DDONE)))) {
DPRINTF(("RXD DDONE bit not set!\n"));
break;
}
if (__predict_false(rxd->flags &
htole32(RT2860_RX_CRCERR | RT2860_RX_ICVERR))) {
DPRINTF(("error %#x\n", rxd->flags));
if_statinc(ifp, if_ierrors);
goto skip;
}
MGETHDR(m1, M_DONTWAIT, MT_DATA);
if (__predict_false(m1 == NULL)) {
DPRINTF(("error2 %#x\n", rxd->flags));
if_statinc(ifp, if_ierrors);
goto skip;
}
MCLGET(m1, M_DONTWAIT);
if (__predict_false((m1->m_flags & M_EXT) == 0)) {
DPRINTF(("no mbuf\n"));
m_freem(m1);
if_statinc(ifp, if_ierrors);
goto skip;
}
bus_dmamap_sync(sc->sc_dmat, data->map, 0,
data->map->dm_mapsize, BUS_DMASYNC_POSTREAD);
bus_dmamap_unload(sc->sc_dmat, data->map);
error = bus_dmamap_load(sc->sc_dmat, data->map,
mtod(m1, void *), MCLBYTES, NULL,
BUS_DMA_READ | BUS_DMA_NOWAIT);
if (__predict_false(error != 0)) {
DPRINTF(("dma error %d\n", error));
m_freem(m1);
error = bus_dmamap_load(sc->sc_dmat, data->map,
mtod(data->m, void *), MCLBYTES, NULL,
BUS_DMA_READ | BUS_DMA_NOWAIT);
if (__predict_false(error != 0)) {
panic("%s: could not load old rx mbuf",
device_xname(sc->sc_dev));
}
rxd->sdp0 = htole32(data->map->dm_segs[0].ds_addr);
if_statinc(ifp, if_ierrors);
goto skip;
}
m = data->m;
data->m = m1;
rxd->sdp0 = htole32(data->map->dm_segs[0].ds_addr);
rxwi = mtod(m, struct rt2860_rxwi *);
m->m_data = (void *)(rxwi + 1);
m_set_rcvif(m, ifp);
m->m_pkthdr.len = m->m_len = le16toh(rxwi->len) & 0xfff;
wh = mtod(m, struct ieee80211_frame *);
#ifdef HW_CRYPTO
if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
wh->i_fc[1] &= ~IEEE80211_FC1_PROTECTED;
}
#endif
if (rxd->flags & htole32(RT2860_RX_L2PAD)) {
u_int hdrlen = ieee80211_hdrsize(wh);
memmove((char *)wh + 2, wh, hdrlen);
m->m_data += 2;
wh = mtod(m, struct ieee80211_frame *);
}
#ifdef HW_CRYPTO
if (__predict_false(rxd->flags & htole32(RT2860_RX_MICERR))) {
ieee80211_notify_michael_failure(ic, wh, 0);
DPRINTF(("error2 %#x\n", rxd->flags));
if_statinc(ifp, if_ierrors);
goto skip;
}
#endif
ant = rt2860_maxrssi_chain(sc, rxwi);
rssi = rxwi->rssi[ant];
s = splnet();
if (__predict_true(sc->sc_drvbpf == NULL))
goto skipbpf;
tap = &sc->sc_rxtap;
tap->wr_flags = 0;
tap->wr_chan_freq = htole16(ic->ic_curchan->ic_freq);
tap->wr_chan_flags = htole16(ic->ic_curchan->ic_flags);
tap->wr_antsignal = rssi;
tap->wr_antenna = ant;
tap->wr_dbm_antsignal = rt2860_rssi2dbm(sc, rssi, ant);
tap->wr_rate = 2;
phy = le16toh(rxwi->phy);
switch (phy & RT2860_PHY_MODE) {
case RT2860_PHY_CCK:
switch ((phy & RT2860_PHY_MCS) & ~RT2860_PHY_SHPRE) {
case 0: tap->wr_rate = 2; break;
case 1: tap->wr_rate = 4; break;
case 2: tap->wr_rate = 11; break;
case 3: tap->wr_rate = 22; break;
}
if (phy & RT2860_PHY_SHPRE)
tap->wr_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
break;
case RT2860_PHY_OFDM:
switch (phy & RT2860_PHY_MCS) {
case 0: tap->wr_rate = 12; break;
case 1: tap->wr_rate = 18; break;
case 2: tap->wr_rate = 24; break;
case 3: tap->wr_rate = 36; break;
case 4: tap->wr_rate = 48; break;
case 5: tap->wr_rate = 72; break;
case 6: tap->wr_rate = 96; break;
case 7: tap->wr_rate = 108; break;
}
break;
}
bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_rxtap_len, m, BPF_D_IN);
skipbpf:
ni = ieee80211_find_rxnode(ic,
(struct ieee80211_frame_min *)wh);
ieee80211_input(ic, m, ni, rssi, 0);
ieee80211_free_node(ni);
splx(s);
skip: rxd->sdl0 &= ~htole16(RT2860_RX_DDONE);
bus_dmamap_sync(sc->sc_dmat, sc->rxq.map,
sc->rxq.cur * sizeof (struct rt2860_rxd),
sizeof (struct rt2860_rxd), BUS_DMASYNC_PREWRITE);
sc->rxq.cur = (sc->rxq.cur + 1) % RT2860_RX_RING_COUNT;
}
RAL_WRITE(sc, RT2860_RX_CALC_IDX,
(sc->rxq.cur - 1) % RT2860_RX_RING_COUNT);
}
static void
rt2860_tbtt_intr(struct rt2860_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
#ifndef IEEE80211_STA_ONLY
if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
if (ic->ic_dtim_count == 0)
ic->ic_dtim_count = ic->ic_dtim_period - 1;
else
ic->ic_dtim_count--;
rt2860_setup_beacon(sc);
#if 0
if (ic->ic_dtim_count == 0)
ieee80211_notify_dtim(ic);
#endif
}
#endif
if ((sc->sc_ic_flags ^ ic->ic_flags) & IEEE80211_F_USEPROT) {
rt2860_updateprot(ic);
sc->sc_ic_flags = ic->ic_flags;
}
}
static void
rt2860_gp_intr(struct rt2860_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
int s;
DPRINTFN(2, ("GP timeout state=%d\n", ic->ic_state));
s = splnet();
if (ic->ic_state == IEEE80211_S_SCAN)
ieee80211_next_scan(ic);
else if (ic->ic_state == IEEE80211_S_RUN)
rt2860_updatestats(sc);
splx(s);
}
int
rt2860_intr(void *arg)
{
struct rt2860_softc *sc = arg;
uint32_t r;
r = RAL_READ(sc, RT2860_INT_STATUS);
if (__predict_false(r == 0xffffffff))
return 0;
if (r == 0)
return 0;
softint_schedule(sc->sc_soft_ih);
return 1;
}
static void
rt2860_softintr(void *arg)
{
struct rt2860_softc *sc = arg;
uint32_t r;
r = RAL_READ(sc, RT2860_INT_STATUS);
if (__predict_false(r == 0xffffffff))
goto out;
if (r == 0)
goto out;
RAL_WRITE(sc, RT2860_INT_STATUS, r);
if (r & RT2860_TX_RX_COHERENT)
rt2860_intr_coherent(sc);
if (r & RT2860_MAC_INT_2)
rt2860_drain_stats_fifo(sc);
if (r & RT2860_TX_DONE_INT5)
rt2860_tx_intr(sc, 5);
if (r & RT2860_RX_DONE_INT)
rt2860_rx_intr(sc);
if (r & RT2860_TX_DONE_INT4)
rt2860_tx_intr(sc, 4);
if (r & RT2860_TX_DONE_INT3)
rt2860_tx_intr(sc, 3);
if (r & RT2860_TX_DONE_INT2)
rt2860_tx_intr(sc, 2);
if (r & RT2860_TX_DONE_INT1)
rt2860_tx_intr(sc, 1);
if (r & RT2860_TX_DONE_INT0)
rt2860_tx_intr(sc, 0);
if (r & RT2860_MAC_INT_0)
rt2860_tbtt_intr(sc);
if (r & RT2860_MAC_INT_3) {
}
if (r & RT2860_MAC_INT_4)
rt2860_gp_intr(sc);
out:
RAL_WRITE(sc, RT2860_INT_MASK, 0x3fffc);
}
static int
rt2860_tx(struct rt2860_softc *sc, struct mbuf **m0, struct ieee80211_node *ni)
{
struct ieee80211com *ic = &sc->sc_ic;
struct rt2860_node *rn = (void *)ni;
struct rt2860_tx_ring *ring;
struct rt2860_tx_data *data;
struct rt2860_txd *txd;
struct rt2860_txwi *txwi;
struct ieee80211_frame *wh;
struct mbuf *m = *m0;
bus_dma_segment_t *seg;
u_int hdrlen;
uint16_t qos, dur;
uint8_t type, qsel, mcs, pid, tid, qid;
int nsegs, hasqos, ridx, ctl_ridx;
data = SLIST_FIRST(&sc->data_pool);
wh = mtod(m, struct ieee80211_frame *);
#ifndef HW_CRYPTO
if (wh->i_fc[1] & IEEE80211_FC1_PROTECTED) {
struct ieee80211_key *k = ieee80211_crypto_encap(ic, ni, m);
if (k == NULL) {
m_freem(m);
*m0 = NULL;
return ENOBUFS;
}
wh = mtod(m, struct ieee80211_frame *);
}
#endif
hdrlen = ieee80211_anyhdrsize(wh);
type = wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK;
if ((hasqos = ieee80211_has_qos(wh))) {
qos = ieee80211_get_qos(wh);
tid = qos & IEEE80211_QOS_TID;
qid = TID_TO_WME_AC(tid);
} else {
qos = 0;
tid = 0;
qid = (type == IEEE80211_FC0_TYPE_MGT) ?
sc->mgtqid : WME_AC_BE;
}
KASSERT(qid < MAXQS);
ring = &sc->txq[qid];
if (IEEE80211_IS_MULTICAST(wh->i_addr1) ||
type != IEEE80211_FC0_TYPE_DATA) {
ridx = (ic->ic_curmode == IEEE80211_MODE_11A) ?
RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1;
ctl_ridx = rt2860_rates[ridx].ctl_ridx;
} else if (ic->ic_fixed_rate != -1) {
ridx = sc->fixed_ridx;
ctl_ridx = rt2860_rates[ridx].ctl_ridx;
} else {
ridx = rn->ridx[ni->ni_txrate];
ctl_ridx = rn->ctl_ridx[ni->ni_txrate];
}
mcs = rt2860_rates[ridx].mcs;
txwi = data->txwi;
txwi->flags = 0;
txwi->xflags = hasqos ? 0 : RT2860_TX_NSEQ;
txwi->wcid = (type == IEEE80211_FC0_TYPE_DATA) ? rn->wcid : 0xff;
txwi->len = htole16(m->m_pkthdr.len);
if (rt2860_rates[ridx].phy == IEEE80211_T_DS) {
txwi->phy = htole16(RT2860_PHY_CCK);
if (ridx != RT2860_RIDX_CCK1 &&
(ic->ic_flags & IEEE80211_F_SHPREAMBLE))
mcs |= RT2860_PHY_SHPRE;
} else
txwi->phy = htole16(RT2860_PHY_OFDM);
txwi->phy |= htole16(mcs);
pid = (mcs + 1) & 0xf;
txwi->len |= htole16(pid << RT2860_TX_PID_SHIFT);
if (!IEEE80211_IS_MULTICAST(wh->i_addr1) &&
(m->m_pkthdr.len + IEEE80211_CRC_LEN > ic->ic_rtsthreshold ||
((ic->ic_flags & IEEE80211_F_USEPROT) &&
rt2860_rates[ridx].phy == IEEE80211_T_OFDM)))
txwi->txop = RT2860_TX_TXOP_HT;
else
txwi->txop = RT2860_TX_TXOP_BACKOFF;
if (!IEEE80211_IS_MULTICAST(wh->i_addr1) &&
(!hasqos || (qos & IEEE80211_QOS_ACKPOLICY) !=
IEEE80211_QOS_ACKPOLICY_NOACK)) {
txwi->xflags |= RT2860_TX_ACK;
if (ic->ic_flags & IEEE80211_F_SHPREAMBLE)
dur = rt2860_rates[ctl_ridx].sp_ack_dur;
else
dur = rt2860_rates[ctl_ridx].lp_ack_dur;
*(uint16_t *)wh->i_dur = htole16(dur);
}
#ifndef IEEE80211_STA_ONLY
if ((wh->i_fc[0] &
(IEEE80211_FC0_TYPE_MASK | IEEE80211_FC0_SUBTYPE_MASK)) ==
(IEEE80211_FC0_TYPE_MGT | IEEE80211_FC0_SUBTYPE_PROBE_RESP))
txwi->flags |= RT2860_TX_TS;
#endif
if (__predict_false(sc->sc_drvbpf != NULL)) {
struct rt2860_tx_radiotap_header *tap = &sc->sc_txtap;
tap->wt_flags = 0;
tap->wt_rate = rt2860_rates[ridx].rate;
tap->wt_chan_freq = htole16(ic->ic_curchan->ic_freq);
tap->wt_chan_flags = htole16(ic->ic_curchan->ic_flags);
tap->wt_hwqueue = qid;
if (mcs & RT2860_PHY_SHPRE)
tap->wt_flags |= IEEE80211_RADIOTAP_F_SHORTPRE;
bpf_mtap2(sc->sc_drvbpf, tap, sc->sc_txtap_len, m, BPF_D_OUT);
}
memcpy(txwi + 1, wh, hdrlen);
m_adj(m, hdrlen);
KASSERT (ring->queued <= RT2860_TX_RING_ONEMORE);
if (bus_dmamap_load_mbuf(sc->sc_dmat, data->map, m, BUS_DMA_NOWAIT)) {
struct mbuf *m_new = m_defrag(m, M_DONTWAIT);
if (m_new != NULL) {
m = m_new;
*m0 = m_new;
} else {
return (ENOBUFS);
}
if (bus_dmamap_load_mbuf(sc->sc_dmat,
data->map, m, BUS_DMA_NOWAIT))
return (EFBIG);
}
qsel = (qid < WME_NUM_AC) ? RT2860_TX_QSEL_EDCA : RT2860_TX_QSEL_MGMT;
txd = &ring->txd[ring->cur];
txd->sdp0 = htole32(data->paddr);
txd->sdl0 = htole16(sizeof (struct rt2860_txwi) + hdrlen);
txd->flags = qsel;
seg = data->map->dm_segs;
for (nsegs = data->map->dm_nsegs; nsegs >= 2; nsegs -= 2) {
txd->sdp1 = htole32(seg->ds_addr);
txd->sdl1 = htole16(seg->ds_len);
seg++;
ring->cur = (ring->cur + 1) % RT2860_TX_RING_COUNT;
txd = &ring->txd[ring->cur];
txd->sdp0 = htole32(seg->ds_addr);
txd->sdl0 = htole16(seg->ds_len);
txd->flags = qsel;
seg++;
}
if (nsegs > 0) {
txd->sdp1 = htole32(seg->ds_addr);
txd->sdl1 = htole16(seg->ds_len | RT2860_TX_LS1);
} else {
txd->sdl0 |= htole16(RT2860_TX_LS0);
txd->sdl1 = 0;
}
SLIST_REMOVE_HEAD(&sc->data_pool, next);
data->m = m;
data->ni = ni;
ring->data[ring->cur] = data;
bus_dmamap_sync(sc->sc_dmat, sc->txwi_map,
(uintptr_t)txwi - (uintptr_t)sc->txwi_vaddr, RT2860_TXWI_DMASZ,
BUS_DMASYNC_PREWRITE);
bus_dmamap_sync(sc->sc_dmat, data->map, 0, data->map->dm_mapsize,
BUS_DMASYNC_PREWRITE);
bus_dmamap_sync(sc->sc_dmat, ring->map, 0, ring->map->dm_mapsize,
BUS_DMASYNC_PREWRITE);
DPRINTFN(4, ("sending frame qid=%d wcid=%d nsegs=%d ridx=%d\n",
qid, txwi->wcid, data->map->dm_nsegs, ridx));
ring->cur = (ring->cur + 1) % RT2860_TX_RING_COUNT;
ring->queued += 1 + (data->map->dm_nsegs / 2);
if (ring->queued > RT2860_TX_RING_ONEMORE)
sc->qfullmsk |= 1 << qid;
RAL_WRITE(sc, RT2860_TX_CTX_IDX(qid), ring->cur);
return 0;
}
static void
rt2860_start(struct ifnet *ifp)
{
struct rt2860_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
struct ether_header *eh;
struct ieee80211_node *ni;
struct mbuf *m;
if ((ifp->if_flags & (IFF_RUNNING | IFF_OACTIVE)) != IFF_RUNNING)
return;
for (;;) {
if (SLIST_EMPTY(&sc->data_pool) || sc->qfullmsk != 0) {
DPRINTF(("%s: stuffup\n", __func__));
ifp->if_flags |= IFF_OACTIVE;
break;
}
IF_DEQUEUE(&ic->ic_mgtq, m);
if (m != NULL) {
ni = M_GETCTX(m, struct ieee80211_node *);
M_CLEARCTX(m);
DPRINTF(("%s: send management\n", __func__));
goto sendit;
}
if (ic->ic_state != IEEE80211_S_RUN) {
DPRINTF(("%s: not running %d\n", __func__,
ic->ic_state));
break;
}
IFQ_DEQUEUE(&ifp->if_snd, m);
if (m == NULL) {
DPRINTF(("%s: nothing to send\n", __func__));
break;
}
if (m->m_len < (int)sizeof(*eh) &&
(m = m_pullup(m, sizeof(*eh))) == NULL) {
DPRINTF(("%s: nothing to send\n", __func__));
if_statinc(ifp, if_oerrors);
continue;
}
eh = mtod(m, struct ether_header *);
ni = ieee80211_find_txnode(ic, eh->ether_dhost);
if (ni == NULL) {
DPRINTF(("%s: can't find tx node\n", __func__));
m_freem(m);
if_statinc(ifp, if_oerrors);
continue;
}
bpf_mtap(ifp, m, BPF_D_OUT);
if ((m = ieee80211_encap(ic, m, ni)) == NULL) {
DPRINTF(("%s: can't encap\n", __func__));
ieee80211_free_node(ni);
if_statinc(ifp, if_oerrors);
continue;
}
sendit:
bpf_mtap3(ic->ic_rawbpf, m, BPF_D_OUT);
if (rt2860_tx(sc, &m, ni) != 0) {
DPRINTF(("%s: can't tx\n", __func__));
m_freem(m);
ieee80211_free_node(ni);
if_statinc(ifp, if_oerrors);
continue;
}
sc->sc_tx_timer = 5;
ifp->if_timer = 1;
}
}
static void
rt2860_watchdog(struct ifnet *ifp)
{
struct rt2860_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
ifp->if_timer = 0;
if (sc->sc_tx_timer > 0) {
if (--sc->sc_tx_timer == 0) {
aprint_error_dev(sc->sc_dev, "device timeout\n");
rt2860_stop(ifp, 0);
rt2860_init(ifp);
if_statinc(ifp, if_oerrors);
return;
}
ifp->if_timer = 1;
}
ieee80211_watchdog(ic);
}
static int
rt2860_ioctl(struct ifnet *ifp, u_long cmd, void *data)
{
struct rt2860_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
int s, error = 0;
s = splnet();
switch (cmd) {
case SIOCSIFFLAGS:
if ((error = ifioctl_common(ifp, cmd, data)) != 0)
break;
switch (ifp->if_flags & (IFF_UP|IFF_RUNNING)) {
case IFF_UP|IFF_RUNNING:
rt2860_update_promisc(ifp);
break;
case IFF_UP:
rt2860_init(ifp);
break;
case IFF_RUNNING:
rt2860_stop(ifp, 1);
break;
case 0:
break;
}
break;
case SIOCADDMULTI:
case SIOCDELMULTI:
if ((error = ether_ioctl(ifp, cmd, data)) == ENETRESET) {
error = 0;
}
break;
case SIOCS80211CHANNEL:
error = ieee80211_ioctl(ic, cmd, data);
if (error == ENETRESET &&
ic->ic_opmode == IEEE80211_M_MONITOR) {
if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) ==
(IFF_UP | IFF_RUNNING))
rt2860_switch_chan(sc, ic->ic_ibss_chan);
error = 0;
}
break;
default:
error = ieee80211_ioctl(ic, cmd, data);
}
if (error == ENETRESET) {
if ((ifp->if_flags & (IFF_UP | IFF_RUNNING)) ==
(IFF_UP | IFF_RUNNING)) {
rt2860_stop(ifp, 0);
rt2860_init(ifp);
}
error = 0;
}
splx(s);
return error;
}
static void
rt2860_mcu_bbp_write(struct rt2860_softc *sc, uint8_t reg, uint8_t val)
{
int ntries;
for (ntries = 0; ntries < 100; ntries++) {
if (!(RAL_READ(sc, RT2860_H2M_BBPAGENT) & RT2860_BBP_CSR_KICK))
break;
DELAY(1);
}
if (ntries == 100) {
aprint_error_dev(sc->sc_dev,
"could not write to BBP through MCU\n");
return;
}
RAL_WRITE(sc, RT2860_H2M_BBPAGENT, RT2860_BBP_RW_PARALLEL |
RT2860_BBP_CSR_KICK | reg << 8 | val);
RAL_BARRIER_WRITE(sc);
rt2860_mcu_cmd(sc, RT2860_MCU_CMD_BBP, 0, 0);
DELAY(1000);
}
static uint8_t
rt2860_mcu_bbp_read(struct rt2860_softc *sc, uint8_t reg)
{
uint32_t val;
int ntries;
for (ntries = 0; ntries < 100; ntries++) {
if (!(RAL_READ(sc, RT2860_H2M_BBPAGENT) & RT2860_BBP_CSR_KICK))
break;
DELAY(1);
}
if (ntries == 100) {
aprint_error_dev(sc->sc_dev,
"could not read from BBP through MCU\n");
return 0;
}
RAL_WRITE(sc, RT2860_H2M_BBPAGENT, RT2860_BBP_RW_PARALLEL |
RT2860_BBP_CSR_KICK | RT2860_BBP_CSR_READ | reg << 8);
RAL_BARRIER_WRITE(sc);
rt2860_mcu_cmd(sc, RT2860_MCU_CMD_BBP, 0, 0);
DELAY(1000);
for (ntries = 0; ntries < 100; ntries++) {
val = RAL_READ(sc, RT2860_H2M_BBPAGENT);
if (!(val & RT2860_BBP_CSR_KICK))
return val & 0xff;
DELAY(1);
}
aprint_error_dev(sc->sc_dev, "could not read from BBP through MCU\n");
return 0;
}
static void
rt2860_rf_write(struct rt2860_softc *sc, uint8_t reg, uint32_t val)
{
uint32_t tmp;
int ntries;
for (ntries = 0; ntries < 100; ntries++) {
if (!(RAL_READ(sc, RT2860_RF_CSR_CFG0) & RT2860_RF_REG_CTRL))
break;
DELAY(1);
}
if (ntries == 100) {
aprint_error_dev(sc->sc_dev, "could not write to RF\n");
return;
}
tmp = RT2860_RF_REG_CTRL | 24 << RT2860_RF_REG_WIDTH_SHIFT |
(val & 0x3fffff) << 2 | (reg & 3);
RAL_WRITE(sc, RT2860_RF_CSR_CFG0, tmp);
}
static uint8_t
rt3090_rf_read(struct rt2860_softc *sc, uint8_t reg)
{
uint32_t tmp;
int ntries;
for (ntries = 0; ntries < 100; ntries++) {
if (!(RAL_READ(sc, RT3070_RF_CSR_CFG) & RT3070_RF_KICK))
break;
DELAY(1);
}
if (ntries == 100) {
aprint_error_dev(sc->sc_dev, "could not read RF register\n");
return 0xff;
}
tmp = RT3070_RF_KICK | reg << 8;
RAL_WRITE(sc, RT3070_RF_CSR_CFG, tmp);
for (ntries = 0; ntries < 100; ntries++) {
tmp = RAL_READ(sc, RT3070_RF_CSR_CFG);
if (!(tmp & RT3070_RF_KICK))
break;
DELAY(1);
}
if (ntries == 100) {
aprint_error_dev(sc->sc_dev, "could not read RF register\n");
return 0xff;
}
return tmp & 0xff;
}
static void
rt3090_rf_write(struct rt2860_softc *sc, uint8_t reg, uint8_t val)
{
uint32_t tmp;
int ntries;
for (ntries = 0; ntries < 10; ntries++) {
if (!(RAL_READ(sc, RT3070_RF_CSR_CFG) & RT3070_RF_KICK))
break;
DELAY(10);
}
if (ntries == 10) {
aprint_error_dev(sc->sc_dev, "could not write to RF\n");
return;
}
tmp = RT3070_RF_WRITE | RT3070_RF_KICK | reg << 8 | val;
RAL_WRITE(sc, RT3070_RF_CSR_CFG, tmp);
}
static int
rt2860_mcu_cmd(struct rt2860_softc *sc, uint8_t cmd, uint16_t arg, int wait)
{
int slot, ntries;
uint32_t tmp;
uint8_t cid;
for (ntries = 0; ntries < 100; ntries++) {
if (!(RAL_READ(sc, RT2860_H2M_MAILBOX) & RT2860_H2M_BUSY))
break;
DELAY(2);
}
if (ntries == 100)
return EIO;
cid = wait ? cmd : RT2860_TOKEN_NO_INTR;
RAL_WRITE(sc, RT2860_H2M_MAILBOX, RT2860_H2M_BUSY | cid << 16 | arg);
RAL_BARRIER_WRITE(sc);
RAL_WRITE(sc, RT2860_HOST_CMD, cmd);
if (!wait)
return 0;
for (ntries = 0; ntries < 200; ntries++) {
tmp = RAL_READ(sc, RT2860_H2M_MAILBOX_CID);
for (slot = 0; slot < 4; slot++, tmp >>= 8)
if ((tmp & 0xff) == cid)
break;
if (slot < 4)
break;
DELAY(100);
}
if (ntries == 200) {
RAL_WRITE(sc, RT2860_H2M_MAILBOX_STATUS, 0xffffffff);
RAL_WRITE(sc, RT2860_H2M_MAILBOX_CID, 0xffffffff);
return ETIMEDOUT;
}
tmp = RAL_READ(sc, RT2860_H2M_MAILBOX_STATUS);
tmp = (tmp >> (slot * 8)) & 0xff;
DPRINTF(("MCU command=0x%02x slot=%d status=0x%02x\n",
cmd, slot, tmp));
RAL_WRITE(sc, RT2860_H2M_MAILBOX_STATUS, 0xffffffff);
RAL_WRITE(sc, RT2860_H2M_MAILBOX_CID, 0xffffffff);
return (tmp == 1) ? 0 : EIO;
}
static void
rt2860_enable_mrr(struct rt2860_softc *sc)
{
#define CCK(mcs) (mcs)
#define OFDM(mcs) (1U << 3 | (mcs))
RAL_WRITE(sc, RT2860_LG_FBK_CFG0,
OFDM(6) << 28 |
OFDM(5) << 24 |
OFDM(4) << 20 |
OFDM(3) << 16 |
OFDM(2) << 12 |
OFDM(1) << 8 |
OFDM(0) << 4 |
OFDM(0));
RAL_WRITE(sc, RT2860_LG_FBK_CFG1,
CCK(2) << 12 |
CCK(1) << 8 |
CCK(0) << 4 |
CCK(0));
#undef OFDM
#undef CCK
}
static void
rt2860_set_txpreamble(struct rt2860_softc *sc)
{
uint32_t tmp;
tmp = RAL_READ(sc, RT2860_AUTO_RSP_CFG);
tmp &= ~RT2860_CCK_SHORT_EN;
if (sc->sc_ic.ic_flags & IEEE80211_F_SHPREAMBLE)
tmp |= RT2860_CCK_SHORT_EN;
RAL_WRITE(sc, RT2860_AUTO_RSP_CFG, tmp);
}
static void
rt2860_set_basicrates(struct rt2860_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
if (ic->ic_curmode == IEEE80211_MODE_11B)
RAL_WRITE(sc, RT2860_LEGACY_BASIC_RATE, 0x003);
else if (ic->ic_curmode == IEEE80211_MODE_11A)
RAL_WRITE(sc, RT2860_LEGACY_BASIC_RATE, 0x150);
else
RAL_WRITE(sc, RT2860_LEGACY_BASIC_RATE, 0x15f);
}
static void
rt2860_select_chan_group(struct rt2860_softc *sc, int group)
{
uint32_t tmp;
uint8_t agc;
DELAY(1000);
rt2860_mcu_bbp_write(sc, 62, 0x37 - sc->lna[group]);
rt2860_mcu_bbp_write(sc, 63, 0x37 - sc->lna[group]);
rt2860_mcu_bbp_write(sc, 64, 0x37 - sc->lna[group]);
rt2860_mcu_bbp_write(sc, 86, 0x00);
if (group == 0) {
if (sc->ext_2ghz_lna) {
rt2860_mcu_bbp_write(sc, 82, 0x62);
rt2860_mcu_bbp_write(sc, 75, 0x46);
} else {
rt2860_mcu_bbp_write(sc, 82, 0x84);
rt2860_mcu_bbp_write(sc, 75, 0x50);
}
} else {
if (sc->mac_ver == 0x3572)
rt2860_mcu_bbp_write(sc, 82, 0x94);
else
rt2860_mcu_bbp_write(sc, 82, 0xf2);
if (sc->ext_5ghz_lna)
rt2860_mcu_bbp_write(sc, 75, 0x46);
else
rt2860_mcu_bbp_write(sc, 75, 0x50);
}
tmp = RAL_READ(sc, RT2860_TX_BAND_CFG);
tmp &= ~(RT2860_5G_BAND_SEL_N | RT2860_5G_BAND_SEL_P);
tmp |= (group == 0) ? RT2860_5G_BAND_SEL_N : RT2860_5G_BAND_SEL_P;
RAL_WRITE(sc, RT2860_TX_BAND_CFG, tmp);
tmp = RT2860_RFTR_EN | RT2860_TRSW_EN | RT2860_LNA_PE0_EN;
if (sc->nrxchains > 1)
tmp |= RT2860_LNA_PE1_EN;
if (sc->mac_ver == 0x3593 && sc->nrxchains > 2)
tmp |= RT3593_LNA_PE2_EN;
if (group == 0) {
tmp |= RT2860_PA_PE_G0_EN;
if (sc->ntxchains > 1)
tmp |= RT2860_PA_PE_G1_EN;
if (sc->mac_ver == 0x3593 && sc->ntxchains > 2)
tmp |= RT3593_PA_PE_G2_EN;
} else {
tmp |= RT2860_PA_PE_A0_EN;
if (sc->ntxchains > 1)
tmp |= RT2860_PA_PE_A1_EN;
if (sc->mac_ver == 0x3593 && sc->ntxchains > 2)
tmp |= RT3593_PA_PE_A2_EN;
}
if (sc->mac_ver == 0x3572) {
rt3090_rf_write(sc, 8, 0x00);
RAL_WRITE(sc, RT2860_TX_PIN_CFG, tmp);
rt3090_rf_write(sc, 8, 0x80);
} else
RAL_WRITE(sc, RT2860_TX_PIN_CFG, tmp);
if (sc->mac_ver == 0x3593) {
tmp = RAL_READ(sc, RT2860_GPIO_CTRL);
if (sc->sc_flags & RT2860_PCIE) {
tmp &= ~0x01010000;
if (group == 0)
tmp |= 0x00010000;
} else {
tmp &= ~0x00008080;
if (group == 0)
tmp |= 0x00000080;
}
tmp = (tmp & ~0x00001000) | 0x00000010;
RAL_WRITE(sc, RT2860_GPIO_CTRL, tmp);
}
if (group == 0) {
if (sc->mac_ver >= 0x3071)
agc = 0x1c + sc->lna[0] * 2;
else
agc = 0x2e + sc->lna[0];
} else {
if (sc->mac_ver == 0x3572)
agc = 0x22 + (sc->lna[group] * 5) / 3;
else
agc = 0x32 + (sc->lna[group] * 5) / 3;
}
rt2860_mcu_bbp_write(sc, 66, agc);
DELAY(1000);
}
static void
rt2860_set_chan(struct rt2860_softc *sc, u_int chan)
{
const struct rfprog *rfprog = rt2860_rf2850;
uint32_t r2, r3, r4;
int8_t txpow1, txpow2;
u_int i;
for (i = 0; rfprog[i].chan != chan; i++);
r2 = rfprog[i].r2;
if (sc->ntxchains == 1)
r2 |= 1 << 12;
if (sc->nrxchains == 1)
r2 |= 1 << 15 | 1 << 4;
else if (sc->nrxchains == 2)
r2 |= 1 << 4;
txpow1 = sc->txpow1[i];
txpow2 = sc->txpow2[i];
if (chan > 14) {
if (txpow1 >= 0)
txpow1 = txpow1 << 1 | 1;
else
txpow1 = (7 + txpow1) << 1;
if (txpow2 >= 0)
txpow2 = txpow2 << 1 | 1;
else
txpow2 = (7 + txpow2) << 1;
}
r3 = rfprog[i].r3 | txpow1 << 7;
r4 = rfprog[i].r4 | sc->freq << 13 | txpow2 << 4;
rt2860_rf_write(sc, RT2860_RF1, rfprog[i].r1);
rt2860_rf_write(sc, RT2860_RF2, r2);
rt2860_rf_write(sc, RT2860_RF3, r3);
rt2860_rf_write(sc, RT2860_RF4, r4);
DELAY(200);
rt2860_rf_write(sc, RT2860_RF1, rfprog[i].r1);
rt2860_rf_write(sc, RT2860_RF2, r2);
rt2860_rf_write(sc, RT2860_RF3, r3 | 1);
rt2860_rf_write(sc, RT2860_RF4, r4);
DELAY(200);
rt2860_rf_write(sc, RT2860_RF1, rfprog[i].r1);
rt2860_rf_write(sc, RT2860_RF2, r2);
rt2860_rf_write(sc, RT2860_RF3, r3);
rt2860_rf_write(sc, RT2860_RF4, r4);
}
static void
rt3090_set_chan(struct rt2860_softc *sc, u_int chan)
{
int8_t txpow1, txpow2;
uint8_t rf;
int i;
KASSERT(chan >= 1 && chan <= 14);
for (i = 0; rt2860_rf2850[i].chan != chan; i++);
txpow1 = sc->txpow1[i];
txpow2 = sc->txpow2[i];
rt3090_rf_write(sc, 2, rt3090_freqs[i].n);
rf = rt3090_rf_read(sc, 3);
rf = (rf & ~0x0f) | rt3090_freqs[i].k;
rt3090_rf_write(sc, 3, rf);
rf = rt3090_rf_read(sc, 6);
rf = (rf & ~0x03) | rt3090_freqs[i].r;
rt3090_rf_write(sc, 6, rf);
rf = rt3090_rf_read(sc, 12);
rf = (rf & ~0x1f) | txpow1;
rt3090_rf_write(sc, 12, rf);
rf = rt3090_rf_read(sc, 13);
rf = (rf & ~0x1f) | txpow2;
rt3090_rf_write(sc, 13, rf);
rf = rt3090_rf_read(sc, 1);
rf &= ~0xfc;
if (sc->ntxchains == 1)
rf |= RT3070_TX1_PD | RT3070_TX2_PD;
else if (sc->ntxchains == 2)
rf |= RT3070_TX2_PD;
if (sc->nrxchains == 1)
rf |= RT3070_RX1_PD | RT3070_RX2_PD;
else if (sc->nrxchains == 2)
rf |= RT3070_RX2_PD;
rt3090_rf_write(sc, 1, rf);
rf = rt3090_rf_read(sc, 23);
rf = (rf & ~0x7f) | sc->freq;
rt3090_rf_write(sc, 23, rf);
rf = rt3090_rf_read(sc, 24);
rf = (rf & ~0x3f) | sc->rf24_20mhz;
rt3090_rf_write(sc, 24, rf);
rf = rt3090_rf_read(sc, 31);
rf = (rf & ~0x3f) | sc->rf24_20mhz;
rt3090_rf_write(sc, 31, rf);
rf = rt3090_rf_read(sc, 7);
rt3090_rf_write(sc, 7, rf | RT3070_TUNE);
}
static void
rt5390_set_chan(struct rt2860_softc *sc, u_int chan)
{
uint8_t h20mhz, rf, tmp;
int8_t txpow1, txpow2;
int i;
KASSERT(chan >= 1 && chan <= 14);
for (i = 0; rt2860_rf2850[i].chan != chan; i++);
txpow1 = sc->txpow1[i];
txpow2 = sc->txpow2[i];
rt3090_rf_write(sc, 8, rt3090_freqs[i].n);
rt3090_rf_write(sc, 9, rt3090_freqs[i].k & 0x0f);
rf = rt3090_rf_read(sc, 11);
rf = (rf & ~0x03) | (rt3090_freqs[i].r & 0x03);
rt3090_rf_write(sc, 11, rf);
rf = rt3090_rf_read(sc, 49);
rf = (rf & ~0x3f) | (txpow1 & 0x3f);
if ((rf & 0x3f) > 0x27)
rf = (rf & ~0x3f) | 0x27;
rt3090_rf_write(sc, 49, rf);
if (sc->mac_ver == 0x5392) {
rf = rt3090_rf_read(sc, 50);
rf = (rf & ~0x3f) | (txpow2 & 0x3f);
if ((rf & 0x3f) > 0x27)
rf = (rf & ~0x3f) | 0x27;
rt3090_rf_write(sc, 50, rf);
}
rf = rt3090_rf_read(sc, 1);
rf |= RT3070_RF_BLOCK | RT3070_PLL_PD | RT3070_RX0_PD | RT3070_TX0_PD;
if (sc->mac_ver == 0x5392)
rf |= RT3070_RX1_PD | RT3070_TX1_PD;
rt3090_rf_write(sc, 1, rf);
rf = rt3090_rf_read(sc, 2);
rt3090_rf_write(sc, 2, rf | RT3593_RESCAL);
DELAY(1000);
rt3090_rf_write(sc, 2, rf & ~RT3593_RESCAL);
rf = rt3090_rf_read(sc, 17);
tmp = rf;
rf = (rf & ~0x7f) | (sc->freq & 0x7f);
rf = MIN(rf, 0x5f);
if (tmp != rf)
rt2860_mcu_cmd(sc, 0x74, (tmp << 8 ) | rf, 0);
if (sc->mac_ver == 0x5390) {
if (chan <= 4)
rf = 0x73;
else if (chan >= 5 && chan <= 6)
rf = 0x63;
else if (chan >= 7 && chan <= 10)
rf = 0x53;
else
rf = 43;
rt3090_rf_write(sc, 55, rf);
if (chan == 1)
rf = 0x0c;
else if (chan == 2)
rf = 0x0b;
else if (chan == 3)
rf = 0x0a;
else if (chan >= 4 && chan <= 6)
rf = 0x09;
else if (chan >= 7 && chan <= 12)
rf = 0x08;
else if (chan == 13)
rf = 0x07;
else
rf = 0x06;
rt3090_rf_write(sc, 59, rf);
}
h20mhz = (sc->rf24_20mhz & 0x20) >> 5;
rf = rt3090_rf_read(sc, 30);
rf = (rf & ~0x06) | (h20mhz << 1) | (h20mhz << 2);
rt3090_rf_write(sc, 30, rf);
rf = rt3090_rf_read(sc, 30);
rf = (rf & ~0x18) | 0x10;
rt3090_rf_write(sc, 30, rf);
rf = rt3090_rf_read(sc, 3);
rf |= RT3593_VCOCAL;
rt3090_rf_write(sc, 3, rf);
}
static void
rt3090_rf_init(struct rt2860_softc *sc)
{
uint32_t tmp;
uint8_t rf, bbp;
int i;
rf = rt3090_rf_read(sc, 30);
rt3090_rf_write(sc, 30, rf | 0x80);
DELAY(1000);
rt3090_rf_write(sc, 30, rf & ~0x80);
tmp = RAL_READ(sc, RT3070_LDO_CFG0);
tmp &= ~0x1f000000;
if (sc->patch_dac && sc->mac_rev < 0x0211)
tmp |= 0x0d000000;
else
tmp |= 0x01000000;
RAL_WRITE(sc, RT3070_LDO_CFG0, tmp);
tmp = RAL_READ(sc, RT3070_GPIO_SWITCH);
RAL_WRITE(sc, RT3070_GPIO_SWITCH, tmp & ~0x20);
if (sc->mac_ver == 0x3572) {
for (i = 0; i < (int)__arraycount(rt3572_def_rf); i++) {
rt3090_rf_write(sc, rt3572_def_rf[i].reg,
rt3572_def_rf[i].val);
}
} else {
for (i = 0; i < (int)__arraycount(rt3090_def_rf); i++) {
rt3090_rf_write(sc, rt3090_def_rf[i].reg,
rt3090_def_rf[i].val);
}
}
rt3090_rf_write(sc, 31, 0x14);
rf = rt3090_rf_read(sc, 6);
rt3090_rf_write(sc, 6, rf | 0x40);
if (sc->mac_ver != 0x3593) {
sc->rf24_20mhz = 0x1f;
rt3090_filter_calib(sc, 0x07, 0x16, &sc->rf24_20mhz);
bbp = rt2860_mcu_bbp_read(sc, 4);
rt2860_mcu_bbp_write(sc, 4, (bbp & ~0x08) | 0x10);
rf = rt3090_rf_read(sc, 31);
rt3090_rf_write(sc, 31, rf | 0x20);
sc->rf24_40mhz = 0x2f;
rt3090_filter_calib(sc, 0x27, 0x19, &sc->rf24_40mhz);
bbp = rt2860_mcu_bbp_read(sc, 4);
rt2860_mcu_bbp_write(sc, 4, bbp & ~0x18);
}
if (sc->mac_rev < 0x0211)
rt3090_rf_write(sc, 27, 0x03);
tmp = RAL_READ(sc, RT3070_OPT_14);
RAL_WRITE(sc, RT3070_OPT_14, tmp | 1);
if (sc->rf_rev == RT3070_RF_3020)
rt3090_set_rx_antenna(sc, 0);
bbp = rt2860_mcu_bbp_read(sc, 138);
if (sc->mac_ver == 0x3593) {
if (sc->ntxchains == 1)
bbp |= 0x60;
else if (sc->ntxchains == 2)
bbp |= 0x40;
if (sc->nrxchains == 1)
bbp &= ~0x06;
else if (sc->nrxchains == 2)
bbp &= ~0x04;
} else {
if (sc->ntxchains == 1)
bbp |= 0x20;
if (sc->nrxchains == 1)
bbp &= ~0x02;
}
rt2860_mcu_bbp_write(sc, 138, bbp);
rf = rt3090_rf_read(sc, 1);
rf &= ~(RT3070_RX0_PD | RT3070_TX0_PD);
rf |= RT3070_RF_BLOCK | RT3070_RX1_PD | RT3070_TX1_PD;
rt3090_rf_write(sc, 1, rf);
rf = rt3090_rf_read(sc, 15);
rt3090_rf_write(sc, 15, rf & ~RT3070_TX_LO2);
rf = rt3090_rf_read(sc, 17);
rf &= ~RT3070_TX_LO1;
if (sc->mac_rev >= 0x0211 && !sc->ext_2ghz_lna)
rf |= 0x20;
if (sc->txmixgain_2ghz >= 2)
rf = (rf & ~0x7) | sc->txmixgain_2ghz;
rt3090_rf_write(sc, 17, rf);
rf = rt3090_rf_read(sc, 20);
rt3090_rf_write(sc, 20, rf & ~RT3070_RX_LO1);
rf = rt3090_rf_read(sc, 21);
rt3090_rf_write(sc, 21, rf & ~RT3070_RX_LO2);
}
static void
rt5390_rf_init(struct rt2860_softc *sc)
{
uint8_t rf, bbp;
int i;
rf = rt3090_rf_read(sc, 2);
rt3090_rf_write(sc, 2, rf | RT3593_RESCAL);
DELAY(1000);
rt3090_rf_write(sc, 2, rf & ~RT3593_RESCAL);
if (sc->mac_ver == 0x5392) {
for (i = 0; i < __arraycount(rt5392_def_rf); i++) {
rt3090_rf_write(sc, rt5392_def_rf[i].reg,
rt5392_def_rf[i].val);
}
} else {
for (i = 0; i < __arraycount(rt5390_def_rf); i++) {
rt3090_rf_write(sc, rt5390_def_rf[i].reg,
rt5390_def_rf[i].val);
}
}
sc->rf24_20mhz = 0x1f;
sc->rf24_40mhz = 0x2f;
if (sc->mac_rev < 0x0211)
rt3090_rf_write(sc, 27, 0x03);
RAL_WRITE(sc, RT3070_OPT_14, RAL_READ(sc, RT3070_OPT_14) | 1);
RAL_WRITE(sc, RT2860_TX_SW_CFG1, 0);
RAL_WRITE(sc, RT2860_TX_SW_CFG2, 0);
if (sc->mac_ver == 0x5390)
rt3090_set_rx_antenna(sc, 0);
rt2860_mcu_bbp_write(sc, 79, 0x13);
rt2860_mcu_bbp_write(sc, 80, 0x05);
rt2860_mcu_bbp_write(sc, 81, 0x33);
if (sc->mac_rev >= 0x0211)
rt2860_mcu_bbp_write(sc, 103, 0xc0);
bbp = rt2860_mcu_bbp_read(sc, 138);
if (sc->ntxchains == 1)
bbp |= 0x20;
if (sc->nrxchains == 1)
bbp &= ~0x02;
rt2860_mcu_bbp_write(sc, 138, bbp);
rt3090_rf_write(sc, 38, rt3090_rf_read(sc, 38) & ~RT5390_RX_LO1);
rt3090_rf_write(sc, 39, rt3090_rf_read(sc, 39) & ~RT5390_RX_LO2);
rt2860_mcu_bbp_write(sc, 4,
rt2860_mcu_bbp_read(sc, 4) | RT5390_MAC_IF_CTRL);
rf = rt3090_rf_read(sc, 30);
rf = (rf & ~0x18) | 0x10;
rt3090_rf_write(sc, 30, rf);
}
static void
rt3090_rf_wakeup(struct rt2860_softc *sc)
{
uint32_t tmp;
uint8_t rf;
if (sc->mac_ver == 0x3593) {
rf = rt3090_rf_read(sc, 1);
rt3090_rf_write(sc, 1, rf | RT3593_VCO);
rf = rt3090_rf_read(sc, 3);
rt3090_rf_write(sc, 3, rf | RT3593_VCOCAL);
rf = rt3090_rf_read(sc, 6);
rt3090_rf_write(sc, 6, rf | RT3593_VCO_IC);
rf = rt3090_rf_read(sc, 2);
rt3090_rf_write(sc, 2, rf | RT3593_RESCAL);
rf = rt3090_rf_read(sc, 22);
rf &= ~RT3593_CP_IC_MASK;
rf |= 1 << RT3593_CP_IC_SHIFT;
rt3090_rf_write(sc, 22, rf);
rf = rt3090_rf_read(sc, 46);
rt3090_rf_write(sc, 46, rf | RT3593_RX_CTB);
rf = rt3090_rf_read(sc, 20);
rf &= ~(RT3593_LDO_RF_VC_MASK | RT3593_LDO_PLL_VC_MASK);
rt3090_rf_write(sc, 20, rf);
} else {
rf = rt3090_rf_read(sc, 1);
rt3090_rf_write(sc, 1, rf | RT3070_RF_BLOCK);
rf = rt3090_rf_read(sc, 7);
rt3090_rf_write(sc, 7, rf | 0x30);
rf = rt3090_rf_read(sc, 9);
rt3090_rf_write(sc, 9, rf | 0x0e);
rf = rt3090_rf_read(sc, 21);
rt3090_rf_write(sc, 21, rf | RT3070_RX_CTB);
rf = rt3090_rf_read(sc, 27);
rf &= ~0x77;
if (sc->mac_rev < 0x0211)
rf |= 0x03;
rt3090_rf_write(sc, 27, rf);
}
if (sc->patch_dac && sc->mac_rev < 0x0211) {
tmp = RAL_READ(sc, RT3070_LDO_CFG0);
tmp = (tmp & ~0x1f000000) | 0x0d000000;
RAL_WRITE(sc, RT3070_LDO_CFG0, tmp);
}
}
static void
rt5390_rf_wakeup(struct rt2860_softc *sc)
{
uint32_t tmp;
uint8_t rf;
rf = rt3090_rf_read(sc, 1);
rf |= RT3070_RF_BLOCK | RT3070_PLL_PD | RT3070_RX0_PD |
RT3070_TX0_PD;
if (sc->mac_ver == 0x5392)
rf |= RT3070_RX1_PD | RT3070_TX1_PD;
rt3090_rf_write(sc, 1, rf);
rf = rt3090_rf_read(sc, 6);
rf |= RT3593_VCO_IC | RT3593_VCOCAL;
if (sc->mac_ver == 0x5390)
rf &= ~RT3593_VCO_IC;
rt3090_rf_write(sc, 6, rf);
rt3090_rf_write(sc, 2, rt3090_rf_read(sc, 2) | RT3593_RESCAL);
rf = rt3090_rf_read(sc, 22);
rf = (rf & ~0xe0) | 0x20;
rt3090_rf_write(sc, 22, rf);
rt3090_rf_write(sc, 42, rt3090_rf_read(sc, 42) | RT5390_RX_CTB);
rt3090_rf_write(sc, 20, rt3090_rf_read(sc, 20) & ~0x77);
rt3090_rf_write(sc, 3, rt3090_rf_read(sc, 3) | RT3593_VCOCAL);
if (sc->patch_dac && sc->mac_rev < 0x0211) {
tmp = RAL_READ(sc, RT3070_LDO_CFG0);
tmp = (tmp & ~0x1f000000) | 0x0d000000;
RAL_WRITE(sc, RT3070_LDO_CFG0, tmp);
}
}
static int
rt3090_filter_calib(struct rt2860_softc *sc, uint8_t init, uint8_t target,
uint8_t *val)
{
uint8_t rf22, rf24;
uint8_t bbp55_pb, bbp55_sb, delta;
int ntries;
rf24 = rt3090_rf_read(sc, 24);
rf24 = (rf24 & 0xc0) | init;
rt3090_rf_write(sc, 24, rf24);
rf22 = rt3090_rf_read(sc, 22);
rt3090_rf_write(sc, 22, rf22 | RT3070_BB_LOOPBACK);
rt2860_mcu_bbp_write(sc, 24, 0x00);
for (ntries = 0; ntries < 100; ntries++) {
rt2860_mcu_bbp_write(sc, 25, 0x90);
DELAY(1000);
bbp55_pb = rt2860_mcu_bbp_read(sc, 55);
if (bbp55_pb != 0)
break;
}
if (ntries == 100)
return ETIMEDOUT;
rt2860_mcu_bbp_write(sc, 24, 0x06);
for (ntries = 0; ntries < 100; ntries++) {
rt2860_mcu_bbp_write(sc, 25, 0x90);
DELAY(1000);
bbp55_sb = rt2860_mcu_bbp_read(sc, 55);
delta = bbp55_pb - bbp55_sb;
if (delta > target)
break;
rf24++;
rt3090_rf_write(sc, 24, rf24);
}
if (ntries < 100) {
if (rf24 != init)
rf24--;
*val = rf24;
rt3090_rf_write(sc, 24, rf24);
}
rt2860_mcu_bbp_write(sc, 24, 0x00);
rf22 = rt3090_rf_read(sc, 22);
rt3090_rf_write(sc, 22, rf22 & ~RT3070_BB_LOOPBACK);
return 0;
}
static void
rt3090_rf_setup(struct rt2860_softc *sc)
{
uint8_t bbp;
int i;
if (sc->mac_rev >= 0x0211) {
rt2860_mcu_bbp_write(sc, 103, 0xc0);
bbp = rt2860_mcu_bbp_read(sc, 31);
rt2860_mcu_bbp_write(sc, 31, bbp & ~0x03);
}
RAL_WRITE(sc, RT2860_TX_SW_CFG1, 0);
if (sc->mac_rev < 0x0211) {
RAL_WRITE(sc, RT2860_TX_SW_CFG2,
sc->patch_dac ? 0x2c : 0x0f);
} else
RAL_WRITE(sc, RT2860_TX_SW_CFG2, 0);
if (sc->mac_ver < 0x5390) {
for (i = 0; i < 10; i++) {
if (sc->rf[i].reg == 0 || sc->rf[i].reg == 0xff)
continue;
rt3090_rf_write(sc, sc->rf[i].reg, sc->rf[i].val);
}
}
}
static void
rt2860_set_leds(struct rt2860_softc *sc, uint16_t which)
{
rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LEDS,
which | (sc->leds & 0x7f), 0);
}
static void
rt2860_set_gp_timer(struct rt2860_softc *sc, int ms)
{
uint32_t tmp;
tmp = RAL_READ(sc, RT2860_INT_TIMER_EN);
RAL_WRITE(sc, RT2860_INT_TIMER_EN, tmp & ~RT2860_GP_TIMER_EN);
if (ms == 0)
return;
tmp = RAL_READ(sc, RT2860_INT_TIMER_CFG);
ms *= 16;
tmp = (tmp & 0xffff) | ms << RT2860_GP_TIMER_SHIFT;
RAL_WRITE(sc, RT2860_INT_TIMER_CFG, tmp);
tmp = RAL_READ(sc, RT2860_INT_TIMER_EN);
RAL_WRITE(sc, RT2860_INT_TIMER_EN, tmp | RT2860_GP_TIMER_EN);
}
static void
rt2860_set_bssid(struct rt2860_softc *sc, const uint8_t *bssid)
{
RAL_WRITE(sc, RT2860_MAC_BSSID_DW0,
bssid[0] | bssid[1] << 8 | bssid[2] << 16 | bssid[3] << 24);
RAL_WRITE(sc, RT2860_MAC_BSSID_DW1,
bssid[4] | bssid[5] << 8);
}
static void
rt2860_set_macaddr(struct rt2860_softc *sc, const uint8_t *addr)
{
RAL_WRITE(sc, RT2860_MAC_ADDR_DW0,
addr[0] | addr[1] << 8 | addr[2] << 16 | addr[3] << 24);
RAL_WRITE(sc, RT2860_MAC_ADDR_DW1,
addr[4] | addr[5] << 8 | 0xff << 16);
}
static void
rt2860_updateslot(struct ifnet *ifp)
{
struct rt2860_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
uint32_t tmp;
tmp = RAL_READ(sc, RT2860_BKOFF_SLOT_CFG);
tmp &= ~0xff;
tmp |= (ic->ic_flags & IEEE80211_F_SHSLOT) ? 9 : 20;
RAL_WRITE(sc, RT2860_BKOFF_SLOT_CFG, tmp);
}
static void
rt2860_updateprot(struct ieee80211com *ic)
{
struct rt2860_softc *sc = ic->ic_ifp->if_softc;
uint32_t tmp;
tmp = RT2860_RTSTH_EN | RT2860_PROT_NAV_SHORT | RT2860_TXOP_ALLOW_ALL;
tmp |= (ic->ic_curmode == IEEE80211_MODE_11A) ?
rt2860_rates[RT2860_RIDX_OFDM6].mcs :
rt2860_rates[RT2860_RIDX_CCK11].mcs;
RAL_WRITE(sc, RT2860_CCK_PROT_CFG, tmp);
if (ic->ic_flags & IEEE80211_F_USEPROT) {
if (ic->ic_protmode == IEEE80211_PROT_RTSCTS)
tmp |= RT2860_PROT_CTRL_RTS_CTS;
else if (ic->ic_protmode == IEEE80211_PROT_CTSONLY)
tmp |= RT2860_PROT_CTRL_CTS;
}
RAL_WRITE(sc, RT2860_OFDM_PROT_CFG, tmp);
}
static void
rt2860_update_promisc(struct ifnet *ifp)
{
struct rt2860_softc *sc = ifp->if_softc;
uint32_t tmp;
tmp = RAL_READ(sc, RT2860_RX_FILTR_CFG);
tmp &= ~RT2860_DROP_NOT_MYBSS;
if (!(ifp->if_flags & IFF_PROMISC))
tmp |= RT2860_DROP_NOT_MYBSS;
RAL_WRITE(sc, RT2860_RX_FILTR_CFG, tmp);
}
static int
rt2860_updateedca(struct ieee80211com *ic)
{
struct rt2860_softc *sc = ic->ic_ifp->if_softc;
int aci;
for (aci = 0; aci < WME_NUM_AC; aci++) {
RAL_WRITE(sc, RT2860_EDCA_AC_CFG(aci),
ic->ic_wme.wme_params[aci].wmep_logcwmax << 16 |
ic->ic_wme.wme_params[aci].wmep_logcwmin << 12 |
ic->ic_wme.wme_params[aci].wmep_aifsn << 8 |
ic->ic_wme.wme_params[aci].wmep_txopLimit);
}
RAL_WRITE(sc, RT2860_WMM_AIFSN_CFG,
ic->ic_wme.wme_params[WME_AC_VO].wmep_aifsn << 12 |
ic->ic_wme.wme_params[WME_AC_VI].wmep_aifsn << 8 |
ic->ic_wme.wme_params[WME_AC_BK].wmep_aifsn << 4 |
ic->ic_wme.wme_params[WME_AC_BE].wmep_aifsn);
RAL_WRITE(sc, RT2860_WMM_CWMIN_CFG,
ic->ic_wme.wme_params[WME_AC_VO].wmep_logcwmin << 12 |
ic->ic_wme.wme_params[WME_AC_VI].wmep_logcwmin << 8 |
ic->ic_wme.wme_params[WME_AC_BK].wmep_logcwmin << 4 |
ic->ic_wme.wme_params[WME_AC_BE].wmep_logcwmin);
RAL_WRITE(sc, RT2860_WMM_CWMAX_CFG,
ic->ic_wme.wme_params[WME_AC_VO].wmep_logcwmax << 12 |
ic->ic_wme.wme_params[WME_AC_VI].wmep_logcwmax << 8 |
ic->ic_wme.wme_params[WME_AC_BK].wmep_logcwmax << 4 |
ic->ic_wme.wme_params[WME_AC_BE].wmep_logcwmax);
RAL_WRITE(sc, RT2860_WMM_TXOP0_CFG,
ic->ic_wme.wme_params[WME_AC_BK].wmep_txopLimit << 16 |
ic->ic_wme.wme_params[WME_AC_BE].wmep_txopLimit);
RAL_WRITE(sc, RT2860_WMM_TXOP1_CFG,
ic->ic_wme.wme_params[WME_AC_VO].wmep_txopLimit << 16 |
ic->ic_wme.wme_params[WME_AC_VI].wmep_txopLimit);
return 0;
}
#ifdef HW_CRYPTO
static int
rt2860_set_key(struct ieee80211com *ic, const struct ieee80211_key *ck,
const uint8_t *mac)
{
struct rt2860_softc *sc = ic->ic_ifp->if_softc;
struct ieee80211_node *ni = ic->ic_bss;
bus_size_t base;
uint32_t attr;
uint8_t mode, wcid, iv[8];
struct ieee80211_key *k = __UNCONST(ck);
DPRINTF(("%s: cipher %d\n", __func__, k->wk_cipher->ic_cipher));
if ((ic->ic_ifp->if_flags & (IFF_UP | IFF_RUNNING)) !=
(IFF_UP | IFF_RUNNING)) {
DPRINTF(("%s: not running %d\n", __func__,
k->wk_cipher->ic_cipher));
return 1;
}
switch (k->wk_cipher->ic_cipher) {
case IEEE80211_CIPHER_WEP:
k->wk_flags |= IEEE80211_KEY_GROUP;
if (k->wk_keylen == 5)
mode = RT2860_MODE_WEP40;
else
mode = RT2860_MODE_WEP104;
break;
case IEEE80211_CIPHER_TKIP:
mode = RT2860_MODE_TKIP;
break;
case IEEE80211_CIPHER_AES_CCM:
mode = RT2860_MODE_AES_CCMP;
break;
default:
DPRINTF(("%s: bad\n", __func__));
return 0;
}
if (k->wk_flags & IEEE80211_KEY_GROUP) {
wcid = 0;
base = RT2860_SKEY(0, k->wk_keyix);
} else {
wcid = ((struct rt2860_node *)ni)->wcid;
base = RT2860_PKEY(wcid);
}
if (k->wk_cipher->ic_cipher == IEEE80211_CIPHER_TKIP) {
RAL_WRITE_REGION_1(sc, base, k->wk_key, 16);
#ifndef IEEE80211_STA_ONLY
if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
RAL_WRITE_REGION_1(sc, base + 16, &k->wk_key[16], 8);
RAL_WRITE_REGION_1(sc, base + 24, &k->wk_key[24], 8);
} else
#endif
{
RAL_WRITE_REGION_1(sc, base + 16, &k->wk_key[24], 8);
RAL_WRITE_REGION_1(sc, base + 24, &k->wk_key[16], 8);
}
} else
RAL_WRITE_REGION_1(sc, base, k->wk_key, k->wk_keylen);
if (!(k->wk_flags & IEEE80211_KEY_GROUP) ||
(k->wk_flags & IEEE80211_KEY_XMIT)) {
if (k->wk_cipher->ic_cipher == IEEE80211_CIPHER_WEP) {
uint32_t val = cprng_fast32();
if (val >= 0x03ff00 && (val & 0xf8ff00) == 0x00ff00)
val += 0x000100;
iv[0] = val;
iv[1] = val >> 8;
iv[2] = val >> 16;
iv[3] = k->wk_keyix << 6;
iv[4] = iv[5] = iv[6] = iv[7] = 0;
} else {
if (k->wk_cipher->ic_cipher == IEEE80211_CIPHER_TKIP) {
iv[0] = k->wk_keytsc >> 8;
iv[1] = (iv[0] | 0x20) & 0x7f;
iv[2] = k->wk_keytsc;
} else {
iv[0] = k->wk_keytsc;
iv[1] = k->wk_keytsc >> 8;
iv[2] = 0;
}
iv[3] = k->wk_keyix << 6 | IEEE80211_WEP_EXTIV;
iv[4] = k->wk_keytsc >> 16;
iv[5] = k->wk_keytsc >> 24;
iv[6] = k->wk_keytsc >> 32;
iv[7] = k->wk_keytsc >> 40;
}
RAL_WRITE_REGION_1(sc, RT2860_IVEIV(wcid), iv, 8);
}
if (k->wk_flags & IEEE80211_KEY_GROUP) {
attr = RAL_READ(sc, RT2860_SKEY_MODE_0_7);
attr &= ~(0xf << (k->wk_keyix * 4));
attr |= mode << (k->wk_keyix * 4);
RAL_WRITE(sc, RT2860_SKEY_MODE_0_7, attr);
} else {
attr = RAL_READ(sc, RT2860_WCID_ATTR(wcid));
attr = (attr & ~0xf) | (mode << 1) | RT2860_RX_PKEY_EN;
RAL_WRITE(sc, RT2860_WCID_ATTR(wcid), attr);
}
DPRINTF(("%s: ok\n", __func__));
return 1;
}
static int
rt2860_delete_key(struct ieee80211com *ic, const struct ieee80211_key *k)
{
struct rt2860_softc *sc = ic->ic_ifp->if_softc;
struct ieee80211_node *ni = ic->ic_bss;
uint32_t attr;
uint8_t wcid;
if (k->wk_flags & IEEE80211_KEY_GROUP) {
attr = RAL_READ(sc, RT2860_SKEY_MODE_0_7);
attr &= ~(0xf << (k->wk_keyix * 4));
RAL_WRITE(sc, RT2860_SKEY_MODE_0_7, attr);
} else {
wcid = ((struct rt2860_node *)ni)->wcid;
attr = RAL_READ(sc, RT2860_WCID_ATTR(wcid));
attr &= ~0xf;
RAL_WRITE(sc, RT2860_WCID_ATTR(wcid), attr);
}
return 1;
}
#endif
static int8_t
rt2860_rssi2dbm(struct rt2860_softc *sc, uint8_t rssi, uint8_t rxchain)
{
struct ieee80211com *ic = &sc->sc_ic;
struct ieee80211_channel *c = ic->ic_curchan;
int delta;
if (IEEE80211_IS_CHAN_5GHZ(c)) {
u_int chan = ieee80211_chan2ieee(ic, c);
delta = sc->rssi_5ghz[rxchain];
if (chan <= 64)
delta -= sc->lna[1];
else if (chan <= 128)
delta -= sc->lna[2];
else
delta -= sc->lna[3];
} else
delta = sc->rssi_2ghz[rxchain] - sc->lna[0];
return -12 - delta - rssi;
}
static __inline uint32_t
b4inc(uint32_t b32, int8_t delta)
{
int8_t i, b4;
for (i = 0; i < 8; i++) {
b4 = b32 & 0xf;
b4 += delta;
if (b4 < 0)
b4 = 0;
else if (b4 > 0xf)
b4 = 0xf;
b32 = b32 >> 4 | (uint32_t)b4 << 28;
}
return b32;
}
static const char *
rt2860_get_rf(uint32_t rev)
{
switch (rev) {
case RT2860_RF_2820: return "RT2820";
case RT2860_RF_2850: return "RT2850";
case RT2860_RF_2720: return "RT2720";
case RT2860_RF_2750: return "RT2750";
case RT3070_RF_3020: return "RT3020";
case RT3070_RF_2020: return "RT2020";
case RT3070_RF_3021: return "RT3021";
case RT3070_RF_3022: return "RT3022";
case RT3070_RF_3052: return "RT3052";
case RT3070_RF_3320: return "RT3320";
case RT3070_RF_3053: return "RT3053";
case RT5390_RF_5360: return "RT5360";
case RT5390_RF_5390: return "RT5390";
case RT5390_RF_5392: return "RT5392";
default: return "unknown";
}
}
static int
rt2860_read_eeprom(struct rt2860_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
int8_t delta_2ghz, delta_5ghz;
uint32_t tmp;
uint16_t val;
int ridx, ant, i;
sc->sc_srom_read = rt2860_eeprom_read_2;
if (sc->mac_ver >= 0x3071) {
tmp = RAL_READ(sc, RT3070_EFUSE_CTRL);
DPRINTF(("EFUSE_CTRL=0x%08x\n", tmp));
if (tmp & RT3070_SEL_EFUSE)
sc->sc_srom_read = rt3090_efuse_read_2;
}
#ifdef RAL_DEBUG
val = rt2860_srom_read(sc, RT2860_EEPROM_VERSION);
DPRINTF(("EEPROM rev=%d, FAE=%d\n", val & 0xff, val >> 8));
#endif
val = rt2860_srom_read(sc, RT2860_EEPROM_MAC01);
ic->ic_myaddr[0] = val & 0xff;
ic->ic_myaddr[1] = val >> 8;
val = rt2860_srom_read(sc, RT2860_EEPROM_MAC23);
ic->ic_myaddr[2] = val & 0xff;
ic->ic_myaddr[3] = val >> 8;
val = rt2860_srom_read(sc, RT2860_EEPROM_MAC45);
ic->ic_myaddr[4] = val & 0xff;
ic->ic_myaddr[5] = val >> 8;
#ifdef RAL_DEBUG
val = rt2860_srom_read(sc, RT2860_EEPROM_COUNTRY);
DPRINTF(("EEPROM region code=0x%04x\n", val));
#endif
for (i = 0; i < 8; i++) {
val = rt2860_srom_read(sc, RT2860_EEPROM_BBP_BASE + i);
sc->bbp[i].val = val & 0xff;
sc->bbp[i].reg = val >> 8;
DPRINTF(("BBP%d=0x%02x\n", sc->bbp[i].reg, sc->bbp[i].val));
}
if (sc->mac_ver >= 0x3071) {
for (i = 0; i < 10; i++) {
val = rt2860_srom_read(sc, RT3071_EEPROM_RF_BASE + i);
sc->rf[i].val = val & 0xff;
sc->rf[i].reg = val >> 8;
DPRINTF(("RF%d=0x%02x\n", sc->rf[i].reg,
sc->rf[i].val));
}
}
val = rt2860_srom_read(sc, RT2860_EEPROM_FREQ_LEDS);
sc->freq = ((val & 0xff) != 0xff) ? val & 0xff : 0;
DPRINTF(("EEPROM freq offset %d\n", sc->freq & 0xff));
if ((val >> 8) != 0xff) {
sc->leds = val >> 8;
sc->led[0] = rt2860_srom_read(sc, RT2860_EEPROM_LED1);
sc->led[1] = rt2860_srom_read(sc, RT2860_EEPROM_LED2);
sc->led[2] = rt2860_srom_read(sc, RT2860_EEPROM_LED3);
} else {
sc->leds = 0x01;
sc->led[0] = 0x5555;
sc->led[1] = 0x2221;
sc->led[2] = 0xa9f8;
}
DPRINTF(("EEPROM LED mode=0x%02x, LEDs=0x%04x/0x%04x/0x%04x\n",
sc->leds, sc->led[0], sc->led[1], sc->led[2]));
val = rt2860_srom_read(sc, RT2860_EEPROM_ANTENNA);
if (sc->mac_ver >= 0x5390)
sc->rf_rev = rt2860_srom_read(sc, RT2860_EEPROM_CHIPID);
else
sc->rf_rev = (val >> 8) & 0xf;
sc->ntxchains = (val >> 4) & 0xf;
sc->nrxchains = val & 0xf;
DPRINTF(("EEPROM RF rev=0x%02x chains=%dT%dR\n",
sc->rf_rev, sc->ntxchains, sc->nrxchains));
val = rt2860_srom_read(sc, RT2860_EEPROM_CONFIG);
DPRINTF(("EEPROM CFG 0x%04x\n", val));
if ((val >> 8) != 0xff)
sc->patch_dac = (val >> 15) & 1;
if ((val & 0xff) != 0xff) {
sc->ext_5ghz_lna = (val >> 3) & 1;
sc->ext_2ghz_lna = (val >> 2) & 1;
sc->calib_2ghz = sc->calib_5ghz = 0;
sc->rfswitch = val & 1;
}
if (sc->sc_flags & RT2860_ADVANCED_PS) {
val = rt2860_srom_read(sc, RT2860_EEPROM_PCIE_PSLEVEL);
if ((val & 0xff) != 0xff) {
sc->pslevel = val & 0x3;
val = rt2860_srom_read(sc, RT2860_EEPROM_REV);
if ((val & 0xff80) != 0x9280)
sc->pslevel = MIN(sc->pslevel, 1);
DPRINTF(("EEPROM PCIe PS Level=%d\n", sc->pslevel));
}
}
for (i = 0; i < 14; i += 2) {
val = rt2860_srom_read(sc,
RT2860_EEPROM_PWR2GHZ_BASE1 + i / 2);
sc->txpow1[i + 0] = (int8_t)(val & 0xff);
sc->txpow1[i + 1] = (int8_t)(val >> 8);
if (sc->mac_ver != 0x5390) {
val = rt2860_srom_read(sc,
RT2860_EEPROM_PWR2GHZ_BASE2 + i / 2);
sc->txpow2[i + 0] = (int8_t)(val & 0xff);
sc->txpow2[i + 1] = (int8_t)(val >> 8);
}
}
for (i = 0; i < 14; i++) {
if (sc->txpow1[i] < 0 ||
sc->txpow1[i] > ((sc->mac_ver >= 0x5390) ? 39 : 31))
sc->txpow1[i] = 5;
if (sc->mac_ver != 0x5390) {
if (sc->txpow2[i] < 0 ||
sc->txpow2[i] > ((sc->mac_ver >= 0x5392) ? 39 : 31))
sc->txpow2[i] = 5;
}
DPRINTF(("chan %d: power1=%d, power2=%d\n",
rt2860_rf2850[i].chan, sc->txpow1[i], sc->txpow2[i]));
}
for (i = 0; i < 40; i += 2) {
val = rt2860_srom_read(sc,
RT2860_EEPROM_PWR5GHZ_BASE1 + i / 2);
sc->txpow1[i + 14] = (int8_t)(val & 0xff);
sc->txpow1[i + 15] = (int8_t)(val >> 8);
val = rt2860_srom_read(sc,
RT2860_EEPROM_PWR5GHZ_BASE2 + i / 2);
sc->txpow2[i + 14] = (int8_t)(val & 0xff);
sc->txpow2[i + 15] = (int8_t)(val >> 8);
}
for (i = 0; i < 40; i++) {
if (sc->txpow1[14 + i] < -7 || sc->txpow1[14 + i] > 15)
sc->txpow1[14 + i] = 5;
if (sc->txpow2[14 + i] < -7 || sc->txpow2[14 + i] > 15)
sc->txpow2[14 + i] = 5;
DPRINTF(("chan %d: power1=%d, power2=%d\n",
rt2860_rf2850[14 + i].chan, sc->txpow1[14 + i],
sc->txpow2[14 + i]));
}
val = rt2860_srom_read(sc, RT2860_EEPROM_DELTAPWR);
delta_2ghz = delta_5ghz = 0;
if ((val & 0xff) != 0xff && (val & 0x80)) {
delta_2ghz = val & 0xf;
if (!(val & 0x40))
delta_2ghz = -delta_2ghz;
}
val >>= 8;
if ((val & 0xff) != 0xff && (val & 0x80)) {
delta_5ghz = val & 0xf;
if (!(val & 0x40))
delta_5ghz = -delta_5ghz;
}
DPRINTF(("power compensation=%d (2GHz), %d (5GHz)\n",
delta_2ghz, delta_5ghz));
for (ridx = 0; ridx < 5; ridx++) {
uint32_t reg;
val = rt2860_srom_read(sc, RT2860_EEPROM_RPWR + ridx * 2);
reg = val;
val = rt2860_srom_read(sc, RT2860_EEPROM_RPWR + ridx * 2 + 1);
reg |= (uint32_t)val << 16;
sc->txpow20mhz[ridx] = reg;
sc->txpow40mhz_2ghz[ridx] = b4inc(reg, delta_2ghz);
sc->txpow40mhz_5ghz[ridx] = b4inc(reg, delta_5ghz);
DPRINTF(("ridx %d: power 20MHz=0x%08x, 40MHz/2GHz=0x%08x, "
"40MHz/5GHz=0x%08x\n", ridx, sc->txpow20mhz[ridx],
sc->txpow40mhz_2ghz[ridx], sc->txpow40mhz_5ghz[ridx]));
}
val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI1_2GHZ);
sc->tssi_2ghz[0] = val & 0xff;
sc->tssi_2ghz[1] = val >> 8;
val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI2_2GHZ);
sc->tssi_2ghz[2] = val & 0xff;
sc->tssi_2ghz[3] = val >> 8;
val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI3_2GHZ);
sc->tssi_2ghz[4] = val & 0xff;
sc->tssi_2ghz[5] = val >> 8;
val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI4_2GHZ);
sc->tssi_2ghz[6] = val & 0xff;
sc->tssi_2ghz[7] = val >> 8;
val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI5_2GHZ);
sc->tssi_2ghz[8] = val & 0xff;
sc->step_2ghz = val >> 8;
DPRINTF(("TSSI 2GHz: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x "
"0x%02x 0x%02x step=%d\n", sc->tssi_2ghz[0], sc->tssi_2ghz[1],
sc->tssi_2ghz[2], sc->tssi_2ghz[3], sc->tssi_2ghz[4],
sc->tssi_2ghz[5], sc->tssi_2ghz[6], sc->tssi_2ghz[7],
sc->tssi_2ghz[8], sc->step_2ghz));
if (sc->tssi_2ghz[4] == 0xff)
sc->calib_2ghz = 0;
val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI1_5GHZ);
sc->tssi_5ghz[0] = val & 0xff;
sc->tssi_5ghz[1] = val >> 8;
val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI2_5GHZ);
sc->tssi_5ghz[2] = val & 0xff;
sc->tssi_5ghz[3] = val >> 8;
val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI3_5GHZ);
sc->tssi_5ghz[4] = val & 0xff;
sc->tssi_5ghz[5] = val >> 8;
val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI4_5GHZ);
sc->tssi_5ghz[6] = val & 0xff;
sc->tssi_5ghz[7] = val >> 8;
val = rt2860_srom_read(sc, RT2860_EEPROM_TSSI5_5GHZ);
sc->tssi_5ghz[8] = val & 0xff;
sc->step_5ghz = val >> 8;
DPRINTF(("TSSI 5GHz: 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x "
"0x%02x 0x%02x step=%d\n", sc->tssi_5ghz[0], sc->tssi_5ghz[1],
sc->tssi_5ghz[2], sc->tssi_5ghz[3], sc->tssi_5ghz[4],
sc->tssi_5ghz[5], sc->tssi_5ghz[6], sc->tssi_5ghz[7],
sc->tssi_5ghz[8], sc->step_5ghz));
if (sc->tssi_5ghz[4] == 0xff)
sc->calib_5ghz = 0;
val = rt2860_srom_read(sc, RT2860_EEPROM_RSSI1_2GHZ);
sc->rssi_2ghz[0] = val & 0xff;
sc->rssi_2ghz[1] = val >> 8;
val = rt2860_srom_read(sc, RT2860_EEPROM_RSSI2_2GHZ);
if (sc->mac_ver >= 0x3071) {
if ((val & 0xff) != 0xff)
sc->txmixgain_2ghz = val & 0x7;
DPRINTF(("tx mixer gain=%u (2GHz)\n", sc->txmixgain_2ghz));
} else
sc->rssi_2ghz[2] = val & 0xff;
sc->lna[2] = val >> 8;
val = rt2860_srom_read(sc, RT2860_EEPROM_RSSI1_5GHZ);
sc->rssi_5ghz[0] = val & 0xff;
sc->rssi_5ghz[1] = val >> 8;
val = rt2860_srom_read(sc, RT2860_EEPROM_RSSI2_5GHZ);
sc->rssi_5ghz[2] = val & 0xff;
sc->lna[3] = val >> 8;
val = rt2860_srom_read(sc, RT2860_EEPROM_LNA);
if (sc->mac_ver >= 0x3071)
sc->lna[0] = RT3090_DEF_LNA;
else
sc->lna[0] = val & 0xff;
sc->lna[1] = val >> 8;
if (sc->lna[2] == 0 || sc->lna[2] == 0xff) {
DPRINTF(("invalid LNA for channel group %d\n", 2));
sc->lna[2] = sc->lna[1];
}
if (sc->lna[3] == 0 || sc->lna[3] == 0xff) {
DPRINTF(("invalid LNA for channel group %d\n", 3));
sc->lna[3] = sc->lna[1];
}
for (ant = 0; ant < 3; ant++) {
if (sc->rssi_2ghz[ant] < -10 || sc->rssi_2ghz[ant] > 10) {
DPRINTF(("invalid RSSI%d offset: %d (2GHz)\n",
ant + 1, sc->rssi_2ghz[ant]));
sc->rssi_2ghz[ant] = 0;
}
if (sc->rssi_5ghz[ant] < -10 || sc->rssi_5ghz[ant] > 10) {
DPRINTF(("invalid RSSI%d offset: %d (5GHz)\n",
ant + 1, sc->rssi_5ghz[ant]));
sc->rssi_5ghz[ant] = 0;
}
}
return 0;
}
static int
rt2860_bbp_init(struct rt2860_softc *sc)
{
int i, ntries;
for (ntries = 0; ntries < 20; ntries++) {
uint8_t bbp0 = rt2860_mcu_bbp_read(sc, 0);
if (bbp0 != 0 && bbp0 != 0xff)
break;
}
if (ntries == 20) {
aprint_error_dev(sc->sc_dev,
"timeout waiting for BBP to wake up\n");
return ETIMEDOUT;
}
if (sc->mac_ver >= 0x5390)
rt5390_bbp_init(sc);
else {
for (i = 0; i < (int)__arraycount(rt2860_def_bbp); i++) {
rt2860_mcu_bbp_write(sc, rt2860_def_bbp[i].reg,
rt2860_def_bbp[i].val);
}
}
if (sc->mac_ver == 0x2860 && sc->mac_rev != 0x0101)
rt2860_mcu_bbp_write(sc, 84, 0x19);
if (sc->mac_ver >= 0x3071) {
rt2860_mcu_bbp_write(sc, 79, 0x13);
rt2860_mcu_bbp_write(sc, 80, 0x05);
rt2860_mcu_bbp_write(sc, 81, 0x33);
} else if (sc->mac_ver == 0x2860 && sc->mac_rev == 0x0100) {
rt2860_mcu_bbp_write(sc, 69, 0x16);
rt2860_mcu_bbp_write(sc, 73, 0x12);
}
return 0;
}
static int
rt5390_bbp_init(struct rt2860_softc *sc)
{
uint8_t bbp;
int i;
if (sc->nrxchains > 1) {
bbp = rt2860_mcu_bbp_read(sc, 105);
rt2860_mcu_bbp_write(sc, 105, bbp | RT5390_MLD);
}
bbp = rt2860_mcu_bbp_read(sc, 4);
rt2860_mcu_bbp_write(sc, 4, bbp | RT5390_MAC_IF_CTRL);
for (i = 0; i < __arraycount(rt5390_def_bbp); i++) {
rt2860_mcu_bbp_write(sc, rt5390_def_bbp[i].reg,
rt5390_def_bbp[i].val);
}
if (sc->mac_ver == 0x5392) {
rt2860_mcu_bbp_write(sc, 84, 0x9a);
rt2860_mcu_bbp_write(sc, 95, 0x9a);
rt2860_mcu_bbp_write(sc, 98, 0x12);
rt2860_mcu_bbp_write(sc, 106, 0x05);
rt2860_mcu_bbp_write(sc, 134, 0xd0);
rt2860_mcu_bbp_write(sc, 135, 0xf6);
}
bbp = rt2860_mcu_bbp_read(sc, 152);
rt2860_mcu_bbp_write(sc, 152, bbp | 0x80);
if (sc->mac_ver == 0x5390)
rt2860_mcu_bbp_write(sc, 154, 0);
return 0;
}
static int
rt2860_txrx_enable(struct rt2860_softc *sc)
{
uint32_t tmp;
int ntries;
RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, RT2860_MAC_TX_EN);
RAL_BARRIER_READ_WRITE(sc);
for (ntries = 0; ntries < 200; ntries++) {
tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG);
if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0)
break;
DELAY(1000);
}
if (ntries == 200) {
aprint_error_dev(sc->sc_dev,
"timeout waiting for DMA engine\n");
return ETIMEDOUT;
}
DELAY(50);
tmp |= RT2860_RX_DMA_EN | RT2860_TX_DMA_EN |
RT2860_WPDMA_BT_SIZE64 << RT2860_WPDMA_BT_SIZE_SHIFT;
RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp);
tmp = RT2860_DROP_CRC_ERR | RT2860_DROP_PHY_ERR;
if (sc->sc_ic.ic_opmode != IEEE80211_M_MONITOR) {
tmp |= RT2860_DROP_UC_NOME | RT2860_DROP_DUPL |
RT2860_DROP_CTS | RT2860_DROP_BA | RT2860_DROP_ACK |
RT2860_DROP_VER_ERR | RT2860_DROP_CTRL_RSV |
RT2860_DROP_CFACK | RT2860_DROP_CFEND;
if (sc->sc_ic.ic_opmode == IEEE80211_M_STA)
tmp |= RT2860_DROP_RTS | RT2860_DROP_PSPOLL;
}
RAL_WRITE(sc, RT2860_RX_FILTR_CFG, tmp);
RAL_WRITE(sc, RT2860_MAC_SYS_CTRL,
RT2860_MAC_RX_EN | RT2860_MAC_TX_EN);
return 0;
}
static int
rt2860_init(struct ifnet *ifp)
{
struct rt2860_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
uint32_t tmp;
uint8_t bbp1, bbp3;
int i, qid, ridx, ntries, error;
if (!(sc->sc_flags & RT2860_ENABLED)) {
if (sc->sc_enable != NULL && (*sc->sc_enable)(sc) != 0) {
aprint_error_dev(sc->sc_dev,
"could not enable device\n");
return EIO;
}
sc->sc_flags |= RT2860_ENABLED;
}
if (sc->rfswitch) {
if (!(RAL_READ(sc, RT2860_GPIO_CTRL) & (1 << 2))) {
aprint_normal_dev(sc->sc_dev,
"radio is disabled by hardware switch\n");
#ifdef notyet
rt2860_stop(ifp, 1);
return EPERM;
#endif
}
}
RAL_WRITE(sc, RT2860_PWR_PIN_CFG, RT2860_IO_RA_PE);
tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG);
tmp &= ~(RT2860_RX_DMA_BUSY | RT2860_RX_DMA_EN | RT2860_TX_DMA_BUSY |
RT2860_TX_DMA_EN);
tmp |= RT2860_TX_WB_DDONE;
RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp);
RAL_WRITE(sc, RT2860_WPDMA_RST_IDX, RT2860_RST_DRX_IDX0 |
RT2860_RST_DTX_IDX5 | RT2860_RST_DTX_IDX4 | RT2860_RST_DTX_IDX3 |
RT2860_RST_DTX_IDX2 | RT2860_RST_DTX_IDX1 | RT2860_RST_DTX_IDX0);
RAL_WRITE(sc, RT2860_SYS_CTRL, 0xe1f);
RAL_BARRIER_WRITE(sc);
RAL_WRITE(sc, RT2860_SYS_CTRL, 0xe00);
if ((error = rt2860_load_microcode(sc)) != 0) {
aprint_error_dev(sc->sc_dev,
"could not load 8051 microcode\n");
rt2860_stop(ifp, 1);
return error;
}
IEEE80211_ADDR_COPY(ic->ic_myaddr, CLLADDR(ifp->if_sadl));
rt2860_set_macaddr(sc, ic->ic_myaddr);
for (ridx = 0; ridx < 5; ridx++) {
if (sc->txpow20mhz[ridx] == 0xffffffff)
continue;
RAL_WRITE(sc, RT2860_TX_PWR_CFG(ridx), sc->txpow20mhz[ridx]);
}
for (ntries = 0; ntries < 100; ntries++) {
tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG);
if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0)
break;
DELAY(1000);
}
if (ntries == 100) {
aprint_error_dev(sc->sc_dev,
"timeout waiting for DMA engine\n");
rt2860_stop(ifp, 1);
return ETIMEDOUT;
}
tmp &= ~(RT2860_RX_DMA_BUSY | RT2860_RX_DMA_EN | RT2860_TX_DMA_BUSY |
RT2860_TX_DMA_EN);
tmp |= RT2860_TX_WB_DDONE;
RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp);
RAL_WRITE(sc, RT2860_WPDMA_RST_IDX, 0x1003f);
RAL_WRITE(sc, RT2860_SYS_CTRL, 0xe1f);
RAL_BARRIER_WRITE(sc);
RAL_WRITE(sc, RT2860_SYS_CTRL, 0xe00);
RAL_WRITE(sc, RT2860_PWR_PIN_CFG, RT2860_IO_RA_PE | RT2860_IO_RF_PE);
RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, RT2860_BBP_HRST | RT2860_MAC_SRST);
RAL_BARRIER_WRITE(sc);
RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, 0);
for (i = 0; i < (int)__arraycount(rt2860_def_mac); i++)
RAL_WRITE(sc, rt2860_def_mac[i].reg, rt2860_def_mac[i].val);
if (sc->mac_ver >= 0x5390)
RAL_WRITE(sc, RT2860_TX_SW_CFG0, 0x00000404);
else if (sc->mac_ver >= 0x3071) {
RAL_WRITE(sc, RT2860_TX_SW_CFG0,
4 << RT2860_DLY_PAPE_EN_SHIFT);
}
if (!(RAL_READ(sc, RT2860_PCI_CFG) & RT2860_PCI_CFG_PCI)) {
sc->sc_flags |= RT2860_PCIE;
tmp = RAL_READ(sc, RT2860_US_CYC_CNT);
tmp = (tmp & ~0xff) | 0x7d;
RAL_WRITE(sc, RT2860_US_CYC_CNT, tmp);
}
for (ntries = 0; ntries < 100; ntries++) {
if (!(RAL_READ(sc, RT2860_MAC_STATUS_REG) &
(RT2860_RX_STATUS_BUSY | RT2860_TX_STATUS_BUSY)))
break;
DELAY(1000);
}
if (ntries == 100) {
aprint_error_dev(sc->sc_dev, "timeout waiting for MAC\n");
rt2860_stop(ifp, 1);
return ETIMEDOUT;
}
RAL_WRITE(sc, RT2860_H2M_BBPAGENT, 0);
RAL_WRITE(sc, RT2860_H2M_MAILBOX, 0);
rt2860_mcu_cmd(sc, RT2860_MCU_CMD_RFRESET, 0, 0);
DELAY(1000);
if ((error = rt2860_bbp_init(sc)) != 0) {
rt2860_stop(ifp, 1);
return error;
}
RAL_SET_REGION_4(sc, RT2860_WCID_ENTRY(0), 0, 512);
RAL_SET_REGION_4(sc, RT2860_PKEY(0), 0, 2048);
RAL_SET_REGION_4(sc, RT2860_IVEIV(0), 0, 512);
RAL_SET_REGION_4(sc, RT2860_WCID_ATTR(0), 0, 256);
RAL_SET_REGION_4(sc, RT2860_SKEY(0, 0), 0, 8 * 32);
RAL_SET_REGION_4(sc, RT2860_SKEY_MODE_0_7, 0, 4);
for (qid = 0; qid < MAXQS; qid++) {
RAL_WRITE(sc, RT2860_TX_BASE_PTR(qid), sc->txq[qid].paddr);
RAL_WRITE(sc, RT2860_TX_MAX_CNT(qid), RT2860_TX_RING_COUNT);
RAL_WRITE(sc, RT2860_TX_CTX_IDX(qid), 0);
}
RAL_WRITE(sc, RT2860_RX_BASE_PTR, sc->rxq.paddr);
RAL_WRITE(sc, RT2860_RX_MAX_CNT, RT2860_RX_RING_COUNT);
RAL_WRITE(sc, RT2860_RX_CALC_IDX, RT2860_RX_RING_COUNT - 1);
RAL_WRITE(sc, RT2860_MAX_LEN_CFG, 1 << 12 |
(MCLBYTES - sizeof (struct rt2860_rxwi) - 2));
for (ntries = 0; ntries < 100; ntries++) {
tmp = RAL_READ(sc, RT2860_WPDMA_GLO_CFG);
if ((tmp & (RT2860_TX_DMA_BUSY | RT2860_RX_DMA_BUSY)) == 0)
break;
DELAY(1000);
}
if (ntries == 100) {
aprint_error_dev(sc->sc_dev,
"timeout waiting for DMA engine\n");
rt2860_stop(ifp, 1);
return ETIMEDOUT;
}
tmp &= ~(RT2860_RX_DMA_BUSY | RT2860_RX_DMA_EN | RT2860_TX_DMA_BUSY |
RT2860_TX_DMA_EN);
tmp |= RT2860_TX_WB_DDONE;
RAL_WRITE(sc, RT2860_WPDMA_GLO_CFG, tmp);
RAL_WRITE(sc, RT2860_DELAY_INT_CFG, 0);
for (i = 0; i < 8; i++) {
if (sc->bbp[i].reg == 0 || sc->bbp[i].reg == 0xff)
continue;
rt2860_mcu_bbp_write(sc, sc->bbp[i].reg, sc->bbp[i].val);
}
if (sc->rf_rev == RT3070_RF_2020 ||
sc->rf_rev == RT3070_RF_3020 ||
sc->rf_rev == RT3070_RF_3320 ||
sc->rf_rev == RT5390_RF_5390)
rt3090_set_rx_antenna(sc, 0);
rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED1, sc->led[0], 0);
rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED2, sc->led[1], 0);
rt2860_mcu_cmd(sc, RT2860_MCU_CMD_LED3, sc->led[2], 0);
if (sc->mac_ver >= 0x5390)
rt5390_rf_init(sc);
else if (sc->mac_ver >= 0x3071)
rt3090_rf_init(sc);
rt2860_mcu_cmd(sc, RT2860_MCU_CMD_SLEEP, 0x02ff, 1);
rt2860_mcu_cmd(sc, RT2860_MCU_CMD_WAKEUP, 0, 1);
if (sc->mac_ver >= 0x5390)
rt5390_rf_wakeup(sc);
else if (sc->mac_ver >= 0x3071)
rt3090_rf_wakeup(sc);
bbp3 = rt2860_mcu_bbp_read(sc, 3);
bbp3 &= ~(1 << 3 | 1 << 4);
if (sc->nrxchains == 2)
bbp3 |= 1 << 3;
else if (sc->nrxchains == 3)
bbp3 |= 1 << 4;
rt2860_mcu_bbp_write(sc, 3, bbp3);
bbp1 = rt2860_mcu_bbp_read(sc, 1);
if (sc->ntxchains == 1)
bbp1 = (bbp1 & ~(1 << 3 | 1 << 4));
else if (sc->mac_ver == 0x3593 && sc->ntxchains == 2)
bbp1 = (bbp1 & ~(1 << 4)) | 1 << 3;
else if (sc->mac_ver == 0x3593 && sc->ntxchains == 3)
bbp1 = (bbp1 & ~(1 << 3)) | 1 << 4;
rt2860_mcu_bbp_write(sc, 1, bbp1);
if (sc->mac_ver >= 0x3071)
rt3090_rf_setup(sc);
ic->ic_bss->ni_chan = ic->ic_ibss_chan;
rt2860_switch_chan(sc, ic->ic_ibss_chan);
rt2860_mcu_cmd(sc, RT2860_MCU_CMD_RFRESET, 0, 0);
tmp = RAL_READ(sc, RT2860_TX_RTS_CFG);
tmp &= ~0xffff00;
tmp |= ic->ic_rtsthreshold << 8;
RAL_WRITE(sc, RT2860_TX_RTS_CFG, tmp);
sc->sc_ic_flags = ic->ic_flags;
rt2860_updateprot(ic);
rt2860_set_leds(sc, RT2860_LED_RADIO);
if ((error = rt2860_txrx_enable(sc)) != 0) {
rt2860_stop(ifp, 1);
return error;
}
RAL_WRITE(sc, RT2860_INT_STATUS, 0xffffffff);
RAL_WRITE(sc, RT2860_INT_MASK, 0x3fffc);
if (sc->sc_flags & RT2860_ADVANCED_PS)
rt2860_mcu_cmd(sc, RT2860_MCU_CMD_PSLEVEL, sc->pslevel, 0);
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
if (ic->ic_opmode != IEEE80211_M_MONITOR)
ieee80211_new_state(ic, IEEE80211_S_SCAN, -1);
else
ieee80211_new_state(ic, IEEE80211_S_RUN, -1);
return 0;
}
static void
rt2860_stop(struct ifnet *ifp, int disable)
{
struct rt2860_softc *sc = ifp->if_softc;
struct ieee80211com *ic = &sc->sc_ic;
uint32_t tmp;
int qid;
if (ifp->if_flags & IFF_RUNNING)
rt2860_set_leds(sc, 0);
sc->sc_tx_timer = 0;
ifp->if_timer = 0;
ifp->if_flags &= ~IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
ieee80211_new_state(ic, IEEE80211_S_INIT, -1);
RAL_WRITE(sc, RT2860_INT_MASK, 0);
rt2860_set_gp_timer(sc, 0);
tmp = RAL_READ(sc, RT2860_MAC_SYS_CTRL);
tmp &= ~(RT2860_MAC_RX_EN | RT2860_MAC_TX_EN);
RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, tmp);
RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, RT2860_BBP_HRST | RT2860_MAC_SRST);
RAL_BARRIER_WRITE(sc);
RAL_WRITE(sc, RT2860_MAC_SYS_CTRL, 0);
sc->qfullmsk = 0;
for (qid = 0; qid < MAXQS; qid++)
rt2860_reset_tx_ring(sc, &sc->txq[qid]);
rt2860_reset_rx_ring(sc, &sc->rxq);
if (disable && sc->sc_disable != NULL) {
if (sc->sc_flags & RT2860_ENABLED) {
(*sc->sc_disable)(sc);
sc->sc_flags &= ~RT2860_ENABLED;
}
}
}
static int
rt2860_load_microcode(struct rt2860_softc *sc)
{
int ntries;
RAL_WRITE(sc, RT2860_SYS_CTRL, RT2860_HST_PM_SEL);
RAL_WRITE_REGION_1(sc, RT2860_FW_BASE, sc->ucode, sc->ucsize);
RAL_WRITE(sc, RT2860_SYS_CTRL, 0);
RAL_BARRIER_WRITE(sc);
RAL_WRITE(sc, RT2860_SYS_CTRL, RT2860_MCU_RESET);
RAL_WRITE(sc, RT2860_H2M_BBPAGENT, 0);
RAL_WRITE(sc, RT2860_H2M_MAILBOX, 0);
RAL_BARRIER_READ_WRITE(sc);
for (ntries = 0; ntries < 1000; ntries++) {
if (RAL_READ(sc, RT2860_SYS_CTRL) & RT2860_MCU_READY)
break;
DELAY(1000);
}
if (ntries == 1000) {
aprint_error_dev(sc->sc_dev,
"timeout waiting for MCU to initialize\n");
return ETIMEDOUT;
}
return 0;
}
#if 0
static void
rt2860_calib(struct rt2860_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
const uint8_t *tssi;
uint8_t step, bbp49;
int8_t ridx, d;
bbp49 = rt2860_mcu_bbp_read(sc, 49);
if (IEEE80211_IS_CHAN_2GHZ(ic->ic_bss->ni_chan)) {
tssi = &sc->tssi_2ghz[4];
step = sc->step_2ghz;
} else {
tssi = &sc->tssi_5ghz[4];
step = sc->step_5ghz;
}
if (bbp49 < tssi[0]) {
for (d = 0; d > -4 && bbp49 <= tssi[d - 1]; d--);
} else if (bbp49 > tssi[0]) {
for (d = 0; d < +4 && bbp49 >= tssi[d + 1]; d++);
} else {
d = 0;
}
d *= step;
DPRINTF(("BBP49=0x%02x, adjusting Tx power by %d\n", bbp49, d));
for (ridx = 0; ridx < 5; ridx++) {
if (sc->txpow20mhz[ridx] == 0xffffffff)
continue;
RAL_WRITE(sc, RT2860_TX_PWR_CFG(ridx),
b4inc(sc->txpow20mhz[ridx], d));
}
}
#endif
static void
rt3090_set_rx_antenna(struct rt2860_softc *sc, int aux)
{
uint32_t tmp;
if (aux) {
if (sc->mac_ver == 0x5390) {
rt2860_mcu_bbp_write(sc, 152,
rt2860_mcu_bbp_read(sc, 152) & ~0x80);
} else {
tmp = RAL_READ(sc, RT2860_PCI_EECTRL);
RAL_WRITE(sc, RT2860_PCI_EECTRL, tmp & ~RT2860_C);
tmp = RAL_READ(sc, RT2860_GPIO_CTRL);
RAL_WRITE(sc, RT2860_GPIO_CTRL, (tmp & ~0x0808) | 0x08);
}
} else {
if (sc->mac_ver == 0x5390) {
rt2860_mcu_bbp_write(sc, 152,
rt2860_mcu_bbp_read(sc, 152) | 0x80);
} else {
tmp = RAL_READ(sc, RT2860_PCI_EECTRL);
RAL_WRITE(sc, RT2860_PCI_EECTRL, tmp | RT2860_C);
tmp = RAL_READ(sc, RT2860_GPIO_CTRL);
RAL_WRITE(sc, RT2860_GPIO_CTRL, tmp & ~0x0808);
}
}
}
static void
rt2860_switch_chan(struct rt2860_softc *sc, struct ieee80211_channel *c)
{
struct ieee80211com *ic = &sc->sc_ic;
u_int chan, group;
chan = ieee80211_chan2ieee(ic, c);
DPRINTF(("switch channel %u\n", chan));
if (chan == 0 || chan == IEEE80211_CHAN_ANY)
return;
if (sc->mac_ver >= 0x5390)
rt5390_set_chan(sc, chan);
else if (sc->mac_ver >= 0x3071)
rt3090_set_chan(sc, chan);
else
rt2860_set_chan(sc, chan);
if (chan <= 14)
group = 0;
else if (chan <= 64)
group = 1;
else if (chan <= 128)
group = 2;
else
group = 3;
if (sc->mac_ver < 0x5390)
rt2860_select_chan_group(sc, group);
DELAY(1000);
}
#ifndef IEEE80211_STA_ONLY
static int
rt2860_setup_beacon(struct rt2860_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
struct rt2860_txwi txwi;
struct mbuf *m;
int ridx;
if ((m = ieee80211_beacon_alloc(ic, ic->ic_bss, &sc->sc_bo)) == NULL)
return ENOBUFS;
memset(&txwi, 0, sizeof txwi);
txwi.wcid = 0xff;
txwi.len = htole16(m->m_pkthdr.len);
ridx = (ic->ic_curmode == IEEE80211_MODE_11A) ?
RT2860_RIDX_OFDM6 : RT2860_RIDX_CCK1;
txwi.phy = htole16(rt2860_rates[ridx].mcs);
if (rt2860_rates[ridx].phy == IEEE80211_T_OFDM)
txwi.phy |= htole16(RT2860_PHY_OFDM);
txwi.txop = RT2860_TX_TXOP_HT;
txwi.flags = RT2860_TX_TS;
txwi.xflags = RT2860_TX_NSEQ;
RAL_WRITE_REGION_1(sc, RT2860_BCN_BASE(0),
(uint8_t *)&txwi, sizeof txwi);
RAL_WRITE_REGION_1(sc, RT2860_BCN_BASE(0) + sizeof txwi,
mtod(m, uint8_t *), m->m_pkthdr.len);
m_freem(m);
return 0;
}
#endif
static void
rt2860_enable_tsf_sync(struct rt2860_softc *sc)
{
struct ieee80211com *ic = &sc->sc_ic;
uint32_t tmp;
tmp = RAL_READ(sc, RT2860_BCN_TIME_CFG);
tmp &= ~0x1fffff;
tmp |= ic->ic_bss->ni_intval * 16;
tmp |= RT2860_TSF_TIMER_EN | RT2860_TBTT_TIMER_EN;
if (ic->ic_opmode == IEEE80211_M_STA) {
tmp |= 1 << RT2860_TSF_SYNC_MODE_SHIFT;
}
#ifndef IEEE80211_STA_ONLY
else if (ic->ic_opmode == IEEE80211_M_IBSS) {
tmp |= RT2860_BCN_TX_EN;
tmp |= 2 << RT2860_TSF_SYNC_MODE_SHIFT;
} else if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
tmp |= RT2860_BCN_TX_EN;
tmp |= 3 << RT2860_TSF_SYNC_MODE_SHIFT;
}
#endif
RAL_WRITE(sc, RT2860_BCN_TIME_CFG, tmp);
}
