// SPDX-License-Identifier: GPL-2.0
/*
 * Driver for the Intel SCU IPC mechanism
 *
 * (C) Copyright 2008-2010,2015 Intel Corporation
 * Author: Sreedhara DS (sreedhara.ds@intel.com)
 *
 * SCU running in ARC processor communicates with other entity running in IA
 * core through IPC mechanism which in turn messaging between IA core ad SCU.
 * SCU has two IPC mechanism IPC-1 and IPC-2. IPC-1 is used between IA32 and
 * SCU where IPC-2 is used between P-Unit and SCU. This driver delas with
 * IPC-1 Driver provides an API for power control unit registers (e.g. MSIC)
 * along with other APIs.
 */

#include <linux/cleanup.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/module.h>
#include <linux/slab.h>

#include <linux/platform_data/x86/intel_scu_ipc.h>

/* IPC defines the following message types */
#define IPCMSG_PCNTRL         0xff /* Power controller unit read/write */

/* Command id associated with message IPCMSG_PCNTRL */
#define IPC_CMD_PCNTRL_W      0 /* Register write */
#define IPC_CMD_PCNTRL_R      1 /* Register read */
#define IPC_CMD_PCNTRL_M      2 /* Register read-modify-write */

/*
 * IPC register summary
 *
 * IPC register blocks are memory mapped at fixed address of PCI BAR 0.
 * To read or write information to the SCU, driver writes to IPC-1 memory
 * mapped registers. The following is the IPC mechanism
 *
 * 1. IA core cDMI interface claims this transaction and converts it to a
 *    Transaction Layer Packet (TLP) message which is sent across the cDMI.
 *
 * 2. South Complex cDMI block receives this message and writes it to
 *    the IPC-1 register block, causing an interrupt to the SCU
 *
 * 3. SCU firmware decodes this interrupt and IPC message and the appropriate
 *    message handler is called within firmware.
 */

#define IPC_WWBUF_SIZE    20            /* IPC Write buffer Size */
#define IPC_RWBUF_SIZE    20            /* IPC Read buffer Size */
#define IPC_IOC           0x100         /* IPC command register IOC bit */

struct intel_scu_ipc_dev {
        struct device dev;
        struct module *owner;
        void __iomem *ipc_base;
        struct completion cmd_complete;

        struct intel_scu_ipc_data data;
};

#define IPC_STATUS              0x04
#define IPC_STATUS_IRQ          BIT(2)
#define IPC_STATUS_ERR          BIT(1)
#define IPC_STATUS_BUSY         BIT(0)

/*
 * IPC Write/Read Buffers:
 * 16 byte buffer for sending and receiving data to and from SCU.
 */
#define IPC_WRITE_BUFFER        0x80
#define IPC_READ_BUFFER         0x90

/* Timeout in jiffies */
#define IPC_TIMEOUT             (10 * HZ)

static struct intel_scu_ipc_dev *ipcdev; /* Only one for now */
static DEFINE_MUTEX(ipclock); /* lock used to prevent multiple call to SCU */

static struct class intel_scu_ipc_class = {
        .name = "intel_scu_ipc",
};

/**
 * intel_scu_ipc_dev_get() - Get SCU IPC instance
 *
 * The recommended new API takes SCU IPC instance as parameter and this
 * function can be called by driver to get the instance. This also makes
 * sure the driver providing the IPC functionality cannot be unloaded
 * while the caller has the instance.
 *
 * Call intel_scu_ipc_dev_put() to release the instance.
 *
 * Returns %NULL if SCU IPC is not currently available.
 */
struct intel_scu_ipc_dev *intel_scu_ipc_dev_get(void)
{
        guard(mutex)(&ipclock);

        if (ipcdev) {
                get_device(&ipcdev->dev);
                /*
                 * Prevent the IPC provider from being unloaded while it
                 * is being used.
                 */
                if (try_module_get(ipcdev->owner))
                        return ipcdev;

                put_device(&ipcdev->dev);
        }

        return NULL;
}
EXPORT_SYMBOL_GPL(intel_scu_ipc_dev_get);

/**
 * intel_scu_ipc_dev_put() - Put SCU IPC instance
 * @scu: SCU IPC instance
 *
 * This function releases the SCU IPC instance retrieved from
 * intel_scu_ipc_dev_get() and allows the driver providing IPC to be
 * unloaded.
 */
void intel_scu_ipc_dev_put(struct intel_scu_ipc_dev *scu)
{
        if (scu) {
                module_put(scu->owner);
                put_device(&scu->dev);
        }
}
EXPORT_SYMBOL_GPL(intel_scu_ipc_dev_put);

struct intel_scu_ipc_devres {
        struct intel_scu_ipc_dev *scu;
};

static void devm_intel_scu_ipc_dev_release(struct device *dev, void *res)
{
        struct intel_scu_ipc_devres *dr = res;
        struct intel_scu_ipc_dev *scu = dr->scu;

        intel_scu_ipc_dev_put(scu);
}

/**
 * devm_intel_scu_ipc_dev_get() - Allocate managed SCU IPC device
 * @dev: Device requesting the SCU IPC device
 *
 * The recommended new API takes SCU IPC instance as parameter and this
 * function can be called by driver to get the instance. This also makes
 * sure the driver providing the IPC functionality cannot be unloaded
 * while the caller has the instance.
 *
 * Returns %NULL if SCU IPC is not currently available.
 */
struct intel_scu_ipc_dev *devm_intel_scu_ipc_dev_get(struct device *dev)
{
        struct intel_scu_ipc_devres *dr;
        struct intel_scu_ipc_dev *scu;

        dr = devres_alloc(devm_intel_scu_ipc_dev_release, sizeof(*dr), GFP_KERNEL);
        if (!dr)
                return NULL;

        scu = intel_scu_ipc_dev_get();
        if (!scu) {
                devres_free(dr);
                return NULL;
        }

        dr->scu = scu;
        devres_add(dev, dr);

        return scu;
}
EXPORT_SYMBOL_GPL(devm_intel_scu_ipc_dev_get);

/*
 * Send ipc command
 * Command Register (Write Only):
 * A write to this register results in an interrupt to the SCU core processor
 * Format:
 * |rfu2(8) | size(8) | command id(4) | rfu1(3) | ioc(1) | command(8)|
 */
static inline void ipc_command(struct intel_scu_ipc_dev *scu, u32 cmd)
{
        reinit_completion(&scu->cmd_complete);
        writel(cmd | IPC_IOC, scu->ipc_base);
}

/*
 * Write ipc data
 * IPC Write Buffer (Write Only):
 * 16-byte buffer for sending data associated with IPC command to
 * SCU. Size of the data is specified in the IPC_COMMAND_REG register
 */
static inline void ipc_data_writel(struct intel_scu_ipc_dev *scu, u32 data, u32 offset)
{
        writel(data, scu->ipc_base + IPC_WRITE_BUFFER + offset);
}

/*
 * Status Register (Read Only):
 * Driver will read this register to get the ready/busy status of the IPC
 * block and error status of the IPC command that was just processed by SCU
 * Format:
 * |rfu3(8)|error code(8)|initiator id(8)|cmd id(4)|rfu1(2)|error(1)|busy(1)|
 */
static inline u8 ipc_read_status(struct intel_scu_ipc_dev *scu)
{
        return __raw_readl(scu->ipc_base + IPC_STATUS);
}

/* Read ipc u32 data */
static inline u32 ipc_data_readl(struct intel_scu_ipc_dev *scu, u32 offset)
{
        return readl(scu->ipc_base + IPC_READ_BUFFER + offset);
}

/* Wait till scu status is busy */
static inline int busy_loop(struct intel_scu_ipc_dev *scu)
{
        u8 status;
        int err;

        err = readx_poll_timeout(ipc_read_status, scu, status, !(status & IPC_STATUS_BUSY),
                                 100, jiffies_to_usecs(IPC_TIMEOUT));
        if (err)
                return err;

        return (status & IPC_STATUS_ERR) ? -EIO : 0;
}

/* Wait till ipc ioc interrupt is received or timeout in 10 HZ */
static inline int ipc_wait_for_interrupt(struct intel_scu_ipc_dev *scu)
{
        int status;

        wait_for_completion_timeout(&scu->cmd_complete, IPC_TIMEOUT);

        status = ipc_read_status(scu);
        if (status & IPC_STATUS_BUSY)
                return -ETIMEDOUT;

        if (status & IPC_STATUS_ERR)
                return -EIO;

        return 0;
}

static int intel_scu_ipc_check_status(struct intel_scu_ipc_dev *scu)
{
        return scu->data.irq > 0 ? ipc_wait_for_interrupt(scu) : busy_loop(scu);
}

static struct intel_scu_ipc_dev *intel_scu_ipc_get(struct intel_scu_ipc_dev *scu)
{
        u8 status;

        if (!scu)
                scu = ipcdev;
        if (!scu)
                return ERR_PTR(-ENODEV);

        status = ipc_read_status(scu);
        if (status & IPC_STATUS_BUSY) {
                dev_dbg(&scu->dev, "device is busy\n");
                return ERR_PTR(-EBUSY);
        }

        return scu;
}

/* Read/Write power control(PMIC in Langwell, MSIC in PenWell) registers */
static int pwr_reg_rdwr(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data,
                        u32 count, u32 op, u32 id)
{
        int nc;
        u32 offset = 0;
        int err;
        u8 cbuf[IPC_WWBUF_SIZE];
        u32 *wbuf = (u32 *)&cbuf;

        memset(cbuf, 0, sizeof(cbuf));

        guard(mutex)(&ipclock);

        scu = intel_scu_ipc_get(scu);
        if (IS_ERR(scu))
                return PTR_ERR(scu);

        for (nc = 0; nc < count; nc++, offset += 2) {
                cbuf[offset] = addr[nc];
                cbuf[offset + 1] = addr[nc] >> 8;
        }

        if (id == IPC_CMD_PCNTRL_R) {
                for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
                        ipc_data_writel(scu, wbuf[nc], offset);
                ipc_command(scu, (count * 2) << 16 | id << 12 | 0 << 8 | op);
        } else if (id == IPC_CMD_PCNTRL_W) {
                for (nc = 0; nc < count; nc++, offset += 1)
                        cbuf[offset] = data[nc];
                for (nc = 0, offset = 0; nc < count; nc++, offset += 4)
                        ipc_data_writel(scu, wbuf[nc], offset);
                ipc_command(scu, (count * 3) << 16 | id << 12 | 0 << 8 | op);
        } else if (id == IPC_CMD_PCNTRL_M) {
                cbuf[offset] = data[0];
                cbuf[offset + 1] = data[1];
                ipc_data_writel(scu, wbuf[0], 0); /* Write wbuff */
                ipc_command(scu, 4 << 16 | id << 12 | 0 << 8 | op);
        }

        err = intel_scu_ipc_check_status(scu);
        if (err)
                return err;

        /* Read rbuf */
        for (nc = 0, offset = 0; nc < 4; nc++, offset += 4)
                wbuf[nc] = ipc_data_readl(scu, offset);
        memcpy(data, wbuf, count);

        return 0;
}

/**
 * intel_scu_ipc_dev_ioread8() - Read a byte via the SCU
 * @scu: Optional SCU IPC instance
 * @addr: Register on SCU
 * @data: Return pointer for read byte
 *
 * Read a single register. Returns %0 on success or an error code. All
 * locking between SCU accesses is handled for the caller.
 *
 * This function may sleep.
 */
int intel_scu_ipc_dev_ioread8(struct intel_scu_ipc_dev *scu, u16 addr, u8 *data)
{
        return pwr_reg_rdwr(scu, &addr, data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
}
EXPORT_SYMBOL(intel_scu_ipc_dev_ioread8);

/**
 * intel_scu_ipc_dev_iowrite8() - Write a byte via the SCU
 * @scu: Optional SCU IPC instance
 * @addr: Register on SCU
 * @data: Byte to write
 *
 * Write a single register. Returns %0 on success or an error code. All
 * locking between SCU accesses is handled for the caller.
 *
 * This function may sleep.
 */
int intel_scu_ipc_dev_iowrite8(struct intel_scu_ipc_dev *scu, u16 addr, u8 data)
{
        return pwr_reg_rdwr(scu, &addr, &data, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
}
EXPORT_SYMBOL(intel_scu_ipc_dev_iowrite8);

/**
 * intel_scu_ipc_dev_readv() - Read a set of registers
 * @scu: Optional SCU IPC instance
 * @addr: Register list
 * @data: Bytes to return
 * @len: Length of array
 *
 * Read registers. Returns %0 on success or an error code. All locking
 * between SCU accesses is handled for the caller.
 *
 * The largest array length permitted by the hardware is 5 items.
 *
 * This function may sleep.
 */
int intel_scu_ipc_dev_readv(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data,
                            size_t len)
{
        return pwr_reg_rdwr(scu, addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_R);
}
EXPORT_SYMBOL(intel_scu_ipc_dev_readv);

/**
 * intel_scu_ipc_dev_writev() - Write a set of registers
 * @scu: Optional SCU IPC instance
 * @addr: Register list
 * @data: Bytes to write
 * @len: Length of array
 *
 * Write registers. Returns %0 on success or an error code. All locking
 * between SCU accesses is handled for the caller.
 *
 * The largest array length permitted by the hardware is 5 items.
 *
 * This function may sleep.
 */
int intel_scu_ipc_dev_writev(struct intel_scu_ipc_dev *scu, u16 *addr, u8 *data,
                             size_t len)
{
        return pwr_reg_rdwr(scu, addr, data, len, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_W);
}
EXPORT_SYMBOL(intel_scu_ipc_dev_writev);

/**
 * intel_scu_ipc_dev_update() - Update a register
 * @scu: Optional SCU IPC instance
 * @addr: Register address
 * @data: Bits to update
 * @mask: Mask of bits to update
 *
 * Read-modify-write power control unit register. The first data argument
 * must be register value and second is mask value mask is a bitmap that
 * indicates which bits to update. %0 = masked. Don't modify this bit, %1 =
 * modify this bit. returns %0 on success or an error code.
 *
 * This function may sleep. Locking between SCU accesses is handled
 * for the caller.
 */
int intel_scu_ipc_dev_update(struct intel_scu_ipc_dev *scu, u16 addr, u8 data,
                             u8 mask)
{
        u8 tmp[2] = { data, mask };
        return pwr_reg_rdwr(scu, &addr, tmp, 1, IPCMSG_PCNTRL, IPC_CMD_PCNTRL_M);
}
EXPORT_SYMBOL(intel_scu_ipc_dev_update);

/**
 * intel_scu_ipc_dev_simple_command() - Send a simple command
 * @scu: Optional SCU IPC instance
 * @cmd: Command
 * @sub: Sub type
 *
 * Issue a simple command to the SCU. Do not use this interface if you must
 * then access data as any data values may be overwritten by another SCU
 * access by the time this function returns.
 *
 * This function may sleep. Locking for SCU accesses is handled for the
 * caller.
 */
int intel_scu_ipc_dev_simple_command(struct intel_scu_ipc_dev *scu, int cmd,
                                     int sub)
{
        u32 cmdval;
        int err;

        guard(mutex)(&ipclock);

        scu = intel_scu_ipc_get(scu);
        if (IS_ERR(scu))
                return PTR_ERR(scu);

        cmdval = sub << 12 | cmd;
        ipc_command(scu, cmdval);
        err = intel_scu_ipc_check_status(scu);
        if (err)
                dev_err(&scu->dev, "IPC command %#x failed with %d\n", cmdval, err);
        return err;
}
EXPORT_SYMBOL(intel_scu_ipc_dev_simple_command);

/**
 * intel_scu_ipc_dev_command_with_size() - Command with data
 * @scu: Optional SCU IPC instance
 * @cmd: Command
 * @sub: Sub type
 * @in: Input data
 * @inlen: Input length in bytes
 * @size: Input size written to the IPC command register in whatever
 *        units (dword, byte) the particular firmware requires. Normally
 *        should be the same as @inlen.
 * @out: Output data
 * @outlen: Output length in bytes
 *
 * Issue a command to the SCU which involves data transfers. Do the
 * data copies under the lock but leave it for the caller to interpret.
 */
int intel_scu_ipc_dev_command_with_size(struct intel_scu_ipc_dev *scu, int cmd,
                                        int sub, const void *in, size_t inlen,
                                        size_t size, void *out, size_t outlen)
{
        size_t outbuflen = DIV_ROUND_UP(outlen, sizeof(u32));
        size_t inbuflen = DIV_ROUND_UP(inlen, sizeof(u32));
        u32 cmdval, inbuf[4] = {}, outbuf[4] = {};
        int i, err;

        if (inbuflen > 4 || outbuflen > 4)
                return -EINVAL;

        guard(mutex)(&ipclock);

        scu = intel_scu_ipc_get(scu);
        if (IS_ERR(scu))
                return PTR_ERR(scu);

        memcpy(inbuf, in, inlen);
        for (i = 0; i < inbuflen; i++)
                ipc_data_writel(scu, inbuf[i], 4 * i);

        cmdval = (size << 16) | (sub << 12) | cmd;
        ipc_command(scu, cmdval);
        err = intel_scu_ipc_check_status(scu);
        if (err) {
                dev_err(&scu->dev, "IPC command %#x failed with %d\n", cmdval, err);
                return err;
        }

        for (i = 0; i < outbuflen; i++)
                outbuf[i] = ipc_data_readl(scu, 4 * i);

        memcpy(out, outbuf, outlen);

        return 0;
}
EXPORT_SYMBOL(intel_scu_ipc_dev_command_with_size);

/*
 * Interrupt handler gets called when ioc bit of IPC_COMMAND_REG set to 1
 * When ioc bit is set to 1, caller api must wait for interrupt handler called
 * which in turn unlocks the caller api. Currently this is not used
 *
 * This is edge triggered so we need take no action to clear anything
 */
static irqreturn_t ioc(int irq, void *dev_id)
{
        struct intel_scu_ipc_dev *scu = dev_id;
        int status = ipc_read_status(scu);

        writel(status | IPC_STATUS_IRQ, scu->ipc_base + IPC_STATUS);
        complete(&scu->cmd_complete);

        return IRQ_HANDLED;
}

static void intel_scu_ipc_release(struct device *dev)
{
        struct intel_scu_ipc_dev *scu = container_of(dev, struct intel_scu_ipc_dev, dev);
        struct intel_scu_ipc_data *data = &scu->data;

        if (data->irq > 0)
                free_irq(data->irq, scu);
        iounmap(scu->ipc_base);
        release_mem_region(data->mem.start, resource_size(&data->mem));
        kfree(scu);
}

/**
 * __intel_scu_ipc_register() - Register SCU IPC device
 * @parent: Parent device
 * @scu_data: Data used to configure SCU IPC
 * @owner: Module registering the SCU IPC device
 *
 * Call this function to register SCU IPC mechanism under @parent.
 * Returns pointer to the new SCU IPC device or ERR_PTR() in case of
 * failure. The caller may use the returned instance if it needs to do
 * SCU IPC calls itself.
 */
struct intel_scu_ipc_dev *
__intel_scu_ipc_register(struct device *parent,
                         const struct intel_scu_ipc_data *scu_data,
                         struct module *owner)
{
        int err;
        struct intel_scu_ipc_data *data;
        struct intel_scu_ipc_dev *scu;
        void __iomem *ipc_base;

        guard(mutex)(&ipclock);

        /* We support only one IPC */
        if (ipcdev)
                return ERR_PTR(-EBUSY);

        scu = kzalloc_obj(*scu);
        if (!scu)
                return ERR_PTR(-ENOMEM);

        scu->owner = owner;
        scu->dev.parent = parent;
        scu->dev.class = &intel_scu_ipc_class;
        scu->dev.release = intel_scu_ipc_release;

        memcpy(&scu->data, scu_data, sizeof(scu->data));
        data = &scu->data;

        if (!request_mem_region(data->mem.start, resource_size(&data->mem), "intel_scu_ipc")) {
                err = -EBUSY;
                goto err_free;
        }

        ipc_base = ioremap(data->mem.start, resource_size(&data->mem));
        if (!ipc_base) {
                err = -ENOMEM;
                goto err_release;
        }

        scu->ipc_base = ipc_base;
        init_completion(&scu->cmd_complete);

        if (data->irq > 0) {
                err = request_irq(data->irq, ioc, 0, "intel_scu_ipc", scu);
                if (err)
                        goto err_unmap;
        }

        /*
         * After this point intel_scu_ipc_release() takes care of
         * releasing the SCU IPC resources once refcount drops to zero.
         */
        dev_set_name(&scu->dev, "intel_scu_ipc");
        err = device_register(&scu->dev);
        if (err) {
                put_device(&scu->dev);
                return ERR_PTR(err);
        }

        /* Assign device at last */
        ipcdev = scu;
        return scu;

err_unmap:
        iounmap(ipc_base);
err_release:
        release_mem_region(data->mem.start, resource_size(&data->mem));
err_free:
        kfree(scu);
        return ERR_PTR(err);
}
EXPORT_SYMBOL_GPL(__intel_scu_ipc_register);

/**
 * intel_scu_ipc_unregister() - Unregister SCU IPC
 * @scu: SCU IPC handle
 *
 * This unregisters the SCU IPC device and releases the acquired
 * resources once the refcount goes to zero.
 */
void intel_scu_ipc_unregister(struct intel_scu_ipc_dev *scu)
{
        guard(mutex)(&ipclock);

        if (!WARN_ON(!ipcdev)) {
                ipcdev = NULL;
                device_unregister(&scu->dev);
        }
}
EXPORT_SYMBOL_GPL(intel_scu_ipc_unregister);

static void devm_intel_scu_ipc_unregister(struct device *dev, void *res)
{
        struct intel_scu_ipc_devres *dr = res;
        struct intel_scu_ipc_dev *scu = dr->scu;

        intel_scu_ipc_unregister(scu);
}

/**
 * __devm_intel_scu_ipc_register() - Register managed SCU IPC device
 * @parent: Parent device
 * @scu_data: Data used to configure SCU IPC
 * @owner: Module registering the SCU IPC device
 *
 * Call this function to register managed SCU IPC mechanism under
 * @parent. Returns pointer to the new SCU IPC device or ERR_PTR() in
 * case of failure. The caller may use the returned instance if it needs
 * to do SCU IPC calls itself.
 */
struct intel_scu_ipc_dev *
__devm_intel_scu_ipc_register(struct device *parent,
                              const struct intel_scu_ipc_data *scu_data,
                              struct module *owner)
{
        struct intel_scu_ipc_devres *dr;
        struct intel_scu_ipc_dev *scu;

        dr = devres_alloc(devm_intel_scu_ipc_unregister, sizeof(*dr), GFP_KERNEL);
        if (!dr)
                return NULL;

        scu = __intel_scu_ipc_register(parent, scu_data, owner);
        if (IS_ERR(scu)) {
                devres_free(dr);
                return scu;
        }

        dr->scu = scu;
        devres_add(parent, dr);

        return scu;
}
EXPORT_SYMBOL_GPL(__devm_intel_scu_ipc_register);

static int __init intel_scu_ipc_init(void)
{
        return class_register(&intel_scu_ipc_class);
}
subsys_initcall(intel_scu_ipc_init);

static void __exit intel_scu_ipc_exit(void)
{
        class_unregister(&intel_scu_ipc_class);
}
module_exit(intel_scu_ipc_exit);