// SPDX-License-Identifier: GPL-2.0
/*
 *  Copyright (C) 2017-2018, Intel Corporation. All rights reserved
 *  Copyright Altera Corporation (C) 2014-2016. All rights reserved.
 *  Copyright 2011-2012 Calxeda, Inc.
 */

#include <asm/cacheflush.h>
#include <linux/ctype.h>
#include <linux/delay.h>
#include <linux/edac.h>
#include <linux/firmware/intel/stratix10-smc.h>
#include <linux/genalloc.h>
#include <linux/interrupt.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/kernel.h>
#include <linux/mfd/altera-sysmgr.h>
#include <linux/mfd/syscon.h>
#include <linux/notifier.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/panic_notifier.h>
#include <linux/platform_device.h>
#include <linux/property.h>
#include <linux/regmap.h>
#include <linux/types.h>
#include <linux/uaccess.h>

#include "altera_edac.h"
#include "edac_module.h"

#define EDAC_MOD_STR            "altera_edac"
#define EDAC_DEVICE             "Altera"

#ifdef CONFIG_EDAC_ALTERA_SDRAM
static const struct altr_sdram_prv_data c5_data = {
        .ecc_ctrl_offset    = CV_CTLCFG_OFST,
        .ecc_ctl_en_mask    = CV_CTLCFG_ECC_AUTO_EN,
        .ecc_stat_offset    = CV_DRAMSTS_OFST,
        .ecc_stat_ce_mask   = CV_DRAMSTS_SBEERR,
        .ecc_stat_ue_mask   = CV_DRAMSTS_DBEERR,
        .ecc_saddr_offset   = CV_ERRADDR_OFST,
        .ecc_daddr_offset   = CV_ERRADDR_OFST,
        .ecc_cecnt_offset   = CV_SBECOUNT_OFST,
        .ecc_uecnt_offset   = CV_DBECOUNT_OFST,
        .ecc_irq_en_offset  = CV_DRAMINTR_OFST,
        .ecc_irq_en_mask    = CV_DRAMINTR_INTREN,
        .ecc_irq_clr_offset = CV_DRAMINTR_OFST,
        .ecc_irq_clr_mask   = (CV_DRAMINTR_INTRCLR | CV_DRAMINTR_INTREN),
        .ecc_cnt_rst_offset = CV_DRAMINTR_OFST,
        .ecc_cnt_rst_mask   = CV_DRAMINTR_INTRCLR,
        .ce_ue_trgr_offset  = CV_CTLCFG_OFST,
        .ce_set_mask        = CV_CTLCFG_GEN_SB_ERR,
        .ue_set_mask        = CV_CTLCFG_GEN_DB_ERR,
};

static const struct altr_sdram_prv_data a10_data = {
        .ecc_ctrl_offset    = A10_ECCCTRL1_OFST,
        .ecc_ctl_en_mask    = A10_ECCCTRL1_ECC_EN,
        .ecc_stat_offset    = A10_INTSTAT_OFST,
        .ecc_stat_ce_mask   = A10_INTSTAT_SBEERR,
        .ecc_stat_ue_mask   = A10_INTSTAT_DBEERR,
        .ecc_saddr_offset   = A10_SERRADDR_OFST,
        .ecc_daddr_offset   = A10_DERRADDR_OFST,
        .ecc_irq_en_offset  = A10_ERRINTEN_OFST,
        .ecc_irq_en_mask    = A10_ECC_IRQ_EN_MASK,
        .ecc_irq_clr_offset = A10_INTSTAT_OFST,
        .ecc_irq_clr_mask   = (A10_INTSTAT_SBEERR | A10_INTSTAT_DBEERR),
        .ecc_cnt_rst_offset = A10_ECCCTRL1_OFST,
        .ecc_cnt_rst_mask   = A10_ECC_CNT_RESET_MASK,
        .ce_ue_trgr_offset  = A10_DIAGINTTEST_OFST,
        .ce_set_mask        = A10_DIAGINT_TSERRA_MASK,
        .ue_set_mask        = A10_DIAGINT_TDERRA_MASK,
};

/*********************** EDAC Memory Controller Functions ****************/

/* The SDRAM controller uses the EDAC Memory Controller framework.       */

static irqreturn_t altr_sdram_mc_err_handler(int irq, void *dev_id)
{
        struct mem_ctl_info *mci = dev_id;
        struct altr_sdram_mc_data *drvdata = mci->pvt_info;
        const struct altr_sdram_prv_data *priv = drvdata->data;
        u32 status, err_count = 1, err_addr;

        regmap_read(drvdata->mc_vbase, priv->ecc_stat_offset, &status);

        if (status & priv->ecc_stat_ue_mask) {
                regmap_read(drvdata->mc_vbase, priv->ecc_daddr_offset,
                            &err_addr);
                if (priv->ecc_uecnt_offset)
                        regmap_read(drvdata->mc_vbase, priv->ecc_uecnt_offset,
                                    &err_count);
                panic("\nEDAC: [%d Uncorrectable errors @ 0x%08X]\n",
                      err_count, err_addr);
        }
        if (status & priv->ecc_stat_ce_mask) {
                regmap_read(drvdata->mc_vbase, priv->ecc_saddr_offset,
                            &err_addr);
                if (priv->ecc_cecnt_offset)
                        regmap_read(drvdata->mc_vbase,  priv->ecc_cecnt_offset,
                                    &err_count);
                edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, err_count,
                                     err_addr >> PAGE_SHIFT,
                                     err_addr & ~PAGE_MASK, 0,
                                     0, 0, -1, mci->ctl_name, "");
                /* Clear IRQ to resume */
                regmap_write(drvdata->mc_vbase, priv->ecc_irq_clr_offset,
                             priv->ecc_irq_clr_mask);

                return IRQ_HANDLED;
        }
        return IRQ_NONE;
}

static ssize_t altr_sdr_mc_err_inject_write(struct file *file,
                                            const char __user *data,
                                            size_t count, loff_t *ppos)
{
        struct mem_ctl_info *mci = file->private_data;
        struct altr_sdram_mc_data *drvdata = mci->pvt_info;
        const struct altr_sdram_prv_data *priv = drvdata->data;
        u32 *ptemp;
        dma_addr_t dma_handle;
        u32 reg, read_reg;

        ptemp = dma_alloc_coherent(mci->pdev, 16, &dma_handle, GFP_KERNEL);
        if (!ptemp) {
                edac_printk(KERN_ERR, EDAC_MC,
                            "Inject: Buffer Allocation error\n");
                return -ENOMEM;
        }

        regmap_read(drvdata->mc_vbase, priv->ce_ue_trgr_offset,
                    &read_reg);
        read_reg &= ~(priv->ce_set_mask | priv->ue_set_mask);

        /* Error are injected by writing a word while the SBE or DBE
         * bit in the CTLCFG register is set. Reading the word will
         * trigger the SBE or DBE error and the corresponding IRQ.
         */
        if (count == 3) {
                edac_printk(KERN_ALERT, EDAC_MC,
                            "Inject Double bit error\n");
                local_irq_disable();
                regmap_write(drvdata->mc_vbase, priv->ce_ue_trgr_offset,
                             (read_reg | priv->ue_set_mask));
                local_irq_enable();
        } else {
                edac_printk(KERN_ALERT, EDAC_MC,
                            "Inject Single bit error\n");
                local_irq_disable();
                regmap_write(drvdata->mc_vbase, priv->ce_ue_trgr_offset,
                             (read_reg | priv->ce_set_mask));
                local_irq_enable();
        }

        ptemp[0] = 0x5A5A5A5A;
        ptemp[1] = 0xA5A5A5A5;

        /* Clear the error injection bits */
        regmap_write(drvdata->mc_vbase, priv->ce_ue_trgr_offset, read_reg);
        /* Ensure it has been written out */
        wmb();

        /*
         * To trigger the error, we need to read the data back
         * (the data was written with errors above).
         * The READ_ONCE macros and printk are used to prevent the
         * the compiler optimizing these reads out.
         */
        reg = READ_ONCE(ptemp[0]);
        read_reg = READ_ONCE(ptemp[1]);
        /* Force Read */
        rmb();

        edac_printk(KERN_ALERT, EDAC_MC, "Read Data [0x%X, 0x%X]\n",
                    reg, read_reg);

        dma_free_coherent(mci->pdev, 16, ptemp, dma_handle);

        return count;
}

static const struct file_operations altr_sdr_mc_debug_inject_fops = {
        .open = simple_open,
        .write = altr_sdr_mc_err_inject_write,
        .llseek = generic_file_llseek,
};

static void altr_sdr_mc_create_debugfs_nodes(struct mem_ctl_info *mci)
{
        if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
                return;

        if (!mci->debugfs)
                return;

        edac_debugfs_create_file("altr_trigger", S_IWUSR, mci->debugfs, mci,
                                 &altr_sdr_mc_debug_inject_fops);
}

/* Get total memory size from Open Firmware DTB */
static unsigned long get_total_mem(void)
{
        struct device_node *np = NULL;
        struct resource res;
        int ret;
        unsigned long total_mem = 0;

        for_each_node_by_type(np, "memory") {
                ret = of_address_to_resource(np, 0, &res);
                if (ret)
                        continue;

                total_mem += resource_size(&res);
        }
        edac_dbg(0, "total_mem 0x%lx\n", total_mem);
        return total_mem;
}

static const struct of_device_id altr_sdram_ctrl_of_match[] = {
        { .compatible = "altr,sdram-edac", .data = &c5_data},
        { .compatible = "altr,sdram-edac-a10", .data = &a10_data},
        {},
};
MODULE_DEVICE_TABLE(of, altr_sdram_ctrl_of_match);

static int a10_init(struct regmap *mc_vbase)
{
        if (regmap_update_bits(mc_vbase, A10_INTMODE_OFST,
                               A10_INTMODE_SB_INT, A10_INTMODE_SB_INT)) {
                edac_printk(KERN_ERR, EDAC_MC,
                            "Error setting SB IRQ mode\n");
                return -ENODEV;
        }

        if (regmap_write(mc_vbase, A10_SERRCNTREG_OFST, 1)) {
                edac_printk(KERN_ERR, EDAC_MC,
                            "Error setting trigger count\n");
                return -ENODEV;
        }

        return 0;
}

static int a10_unmask_irq(struct platform_device *pdev, u32 mask)
{
        void __iomem  *sm_base;
        int  ret = 0;

        if (!request_mem_region(A10_SYMAN_INTMASK_CLR, sizeof(u32),
                                dev_name(&pdev->dev))) {
                edac_printk(KERN_ERR, EDAC_MC,
                            "Unable to request mem region\n");
                return -EBUSY;
        }

        sm_base = ioremap(A10_SYMAN_INTMASK_CLR, sizeof(u32));
        if (!sm_base) {
                edac_printk(KERN_ERR, EDAC_MC,
                            "Unable to ioremap device\n");

                ret = -ENOMEM;
                goto release;
        }

        iowrite32(mask, sm_base);

        iounmap(sm_base);

release:
        release_mem_region(A10_SYMAN_INTMASK_CLR, sizeof(u32));

        return ret;
}

static int altr_sdram_probe(struct platform_device *pdev)
{
        struct edac_mc_layer layers[2];
        struct mem_ctl_info *mci;
        struct altr_sdram_mc_data *drvdata;
        const struct altr_sdram_prv_data *priv;
        struct regmap *mc_vbase;
        struct dimm_info *dimm;
        u32 read_reg;
        int irq, irq2, res = 0;
        unsigned long mem_size, irqflags = 0;

        /* Grab the register range from the sdr controller in device tree */
        mc_vbase = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
                                                   "altr,sdr-syscon");
        if (IS_ERR(mc_vbase)) {
                edac_printk(KERN_ERR, EDAC_MC,
                            "regmap for altr,sdr-syscon lookup failed.\n");
                return -ENODEV;
        }

        /* Check specific dependencies for the module */
        priv = device_get_match_data(&pdev->dev);

        /* Validate the SDRAM controller has ECC enabled */
        if (regmap_read(mc_vbase, priv->ecc_ctrl_offset, &read_reg) ||
            ((read_reg & priv->ecc_ctl_en_mask) != priv->ecc_ctl_en_mask)) {
                edac_printk(KERN_ERR, EDAC_MC,
                            "No ECC/ECC disabled [0x%08X]\n", read_reg);
                return -ENODEV;
        }

        /* Grab memory size from device tree. */
        mem_size = get_total_mem();
        if (!mem_size) {
                edac_printk(KERN_ERR, EDAC_MC, "Unable to calculate memory size\n");
                return -ENODEV;
        }

        /* Ensure the SDRAM Interrupt is disabled */
        if (regmap_update_bits(mc_vbase, priv->ecc_irq_en_offset,
                               priv->ecc_irq_en_mask, 0)) {
                edac_printk(KERN_ERR, EDAC_MC,
                            "Error disabling SDRAM ECC IRQ\n");
                return -ENODEV;
        }

        /* Toggle to clear the SDRAM Error count */
        if (regmap_update_bits(mc_vbase, priv->ecc_cnt_rst_offset,
                               priv->ecc_cnt_rst_mask,
                               priv->ecc_cnt_rst_mask)) {
                edac_printk(KERN_ERR, EDAC_MC,
                            "Error clearing SDRAM ECC count\n");
                return -ENODEV;
        }

        if (regmap_update_bits(mc_vbase, priv->ecc_cnt_rst_offset,
                               priv->ecc_cnt_rst_mask, 0)) {
                edac_printk(KERN_ERR, EDAC_MC,
                            "Error clearing SDRAM ECC count\n");
                return -ENODEV;
        }

        irq = platform_get_irq(pdev, 0);
        if (irq < 0) {
                edac_printk(KERN_ERR, EDAC_MC,
                            "No irq %d in DT\n", irq);
                return irq;
        }

        /* Arria10 has a 2nd IRQ */
        irq2 = platform_get_irq(pdev, 1);

        layers[0].type = EDAC_MC_LAYER_CHIP_SELECT;
        layers[0].size = 1;
        layers[0].is_virt_csrow = true;
        layers[1].type = EDAC_MC_LAYER_CHANNEL;
        layers[1].size = 1;
        layers[1].is_virt_csrow = false;
        mci = edac_mc_alloc(0, ARRAY_SIZE(layers), layers,
                            sizeof(struct altr_sdram_mc_data));
        if (!mci)
                return -ENOMEM;

        mci->pdev = &pdev->dev;
        drvdata = mci->pvt_info;
        drvdata->mc_vbase = mc_vbase;
        drvdata->data = priv;
        platform_set_drvdata(pdev, mci);

        if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {
                edac_printk(KERN_ERR, EDAC_MC,
                            "Unable to get managed device resource\n");
                res = -ENOMEM;
                goto free;
        }

        mci->mtype_cap = MEM_FLAG_DDR3;
        mci->edac_ctl_cap = EDAC_FLAG_NONE | EDAC_FLAG_SECDED;
        mci->edac_cap = EDAC_FLAG_SECDED;
        mci->mod_name = EDAC_MOD_STR;
        mci->ctl_name = dev_name(&pdev->dev);
        mci->scrub_mode = SCRUB_SW_SRC;
        mci->dev_name = dev_name(&pdev->dev);

        dimm = *mci->dimms;
        dimm->nr_pages = ((mem_size - 1) >> PAGE_SHIFT) + 1;
        dimm->grain = 8;
        dimm->dtype = DEV_X8;
        dimm->mtype = MEM_DDR3;
        dimm->edac_mode = EDAC_SECDED;

        res = edac_mc_add_mc(mci);
        if (res < 0)
                goto err;

        /* Only the Arria10 has separate IRQs */
        if (of_machine_is_compatible("altr,socfpga-arria10")) {
                /* Arria10 specific initialization */
                res = a10_init(mc_vbase);
                if (res < 0)
                        goto err2;

                res = devm_request_irq(&pdev->dev, irq2,
                                       altr_sdram_mc_err_handler,
                                       IRQF_SHARED, dev_name(&pdev->dev), mci);
                if (res < 0) {
                        edac_mc_printk(mci, KERN_ERR,
                                       "Unable to request irq %d\n", irq2);
                        res = -ENODEV;
                        goto err2;
                }

                res = a10_unmask_irq(pdev, A10_DDR0_IRQ_MASK);
                if (res < 0)
                        goto err2;

                irqflags = IRQF_SHARED;
        }

        res = devm_request_irq(&pdev->dev, irq, altr_sdram_mc_err_handler,
                               irqflags, dev_name(&pdev->dev), mci);
        if (res < 0) {
                edac_mc_printk(mci, KERN_ERR,
                               "Unable to request irq %d\n", irq);
                res = -ENODEV;
                goto err2;
        }

        /* Infrastructure ready - enable the IRQ */
        if (regmap_update_bits(drvdata->mc_vbase, priv->ecc_irq_en_offset,
                               priv->ecc_irq_en_mask, priv->ecc_irq_en_mask)) {
                edac_mc_printk(mci, KERN_ERR,
                               "Error enabling SDRAM ECC IRQ\n");
                res = -ENODEV;
                goto err2;
        }

        altr_sdr_mc_create_debugfs_nodes(mci);

        devres_close_group(&pdev->dev, NULL);

        return 0;

err2:
        edac_mc_del_mc(&pdev->dev);
err:
        devres_release_group(&pdev->dev, NULL);
free:
        edac_mc_free(mci);
        edac_printk(KERN_ERR, EDAC_MC,
                    "EDAC Probe Failed; Error %d\n", res);

        return res;
}

static void altr_sdram_remove(struct platform_device *pdev)
{
        struct mem_ctl_info *mci = platform_get_drvdata(pdev);

        edac_mc_del_mc(&pdev->dev);
        edac_mc_free(mci);
        platform_set_drvdata(pdev, NULL);
}

/*
 * If you want to suspend, need to disable EDAC by removing it
 * from the device tree or defconfig.
 */
#ifdef CONFIG_PM
static int altr_sdram_prepare(struct device *dev)
{
        pr_err("Suspend not allowed when EDAC is enabled.\n");

        return -EPERM;
}

static const struct dev_pm_ops altr_sdram_pm_ops = {
        .prepare = altr_sdram_prepare,
};
#endif

static struct platform_driver altr_sdram_edac_driver = {
        .probe = altr_sdram_probe,
        .remove = altr_sdram_remove,
        .driver = {
                .name = "altr_sdram_edac",
#ifdef CONFIG_PM
                .pm = &altr_sdram_pm_ops,
#endif
                .of_match_table = altr_sdram_ctrl_of_match,
        },
};

module_platform_driver(altr_sdram_edac_driver);

#endif  /* CONFIG_EDAC_ALTERA_SDRAM */

/************************* EDAC Parent Probe *************************/

static const struct of_device_id altr_edac_device_of_match[];

static const struct of_device_id altr_edac_of_match[] = {
        { .compatible = "altr,socfpga-ecc-manager" },
        {},
};
MODULE_DEVICE_TABLE(of, altr_edac_of_match);

static int altr_edac_probe(struct platform_device *pdev)
{
        of_platform_populate(pdev->dev.of_node, altr_edac_device_of_match,
                             NULL, &pdev->dev);
        return 0;
}

static struct platform_driver altr_edac_driver = {
        .probe =  altr_edac_probe,
        .driver = {
                .name = "socfpga_ecc_manager",
                .of_match_table = altr_edac_of_match,
        },
};
module_platform_driver(altr_edac_driver);

/************************* EDAC Device Functions *************************/

/*
 * EDAC Device Functions (shared between various IPs).
 * The discrete memories use the EDAC Device framework. The probe
 * and error handling functions are very similar between memories
 * so they are shared. The memory allocation and freeing for EDAC
 * trigger testing are different for each memory.
 */

#ifdef CONFIG_EDAC_ALTERA_OCRAM
static const struct edac_device_prv_data ocramecc_data;
#endif
#ifdef CONFIG_EDAC_ALTERA_L2C
static const struct edac_device_prv_data l2ecc_data;
#endif
#ifdef CONFIG_EDAC_ALTERA_OCRAM
static const struct edac_device_prv_data a10_ocramecc_data;
#endif
#ifdef CONFIG_EDAC_ALTERA_L2C
static const struct edac_device_prv_data a10_l2ecc_data;
#endif

static irqreturn_t altr_edac_device_handler(int irq, void *dev_id)
{
        irqreturn_t ret_value = IRQ_NONE;
        struct edac_device_ctl_info *dci = dev_id;
        struct altr_edac_device_dev *drvdata = dci->pvt_info;
        const struct edac_device_prv_data *priv = drvdata->data;

        if (irq == drvdata->sb_irq) {
                if (priv->ce_clear_mask)
                        writel(priv->ce_clear_mask, drvdata->base);
                edac_device_handle_ce(dci, 0, 0, drvdata->edac_dev_name);
                ret_value = IRQ_HANDLED;
        } else if (irq == drvdata->db_irq) {
                if (priv->ue_clear_mask)
                        writel(priv->ue_clear_mask, drvdata->base);
                edac_device_handle_ue(dci, 0, 0, drvdata->edac_dev_name);
                panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");
                ret_value = IRQ_HANDLED;
        } else {
                WARN_ON(1);
        }

        return ret_value;
}

static ssize_t __maybe_unused
altr_edac_device_trig(struct file *file, const char __user *user_buf,
                      size_t count, loff_t *ppos)

{
        u32 *ptemp, i, error_mask;
        int result = 0;
        u8 trig_type;
        unsigned long flags;
        struct edac_device_ctl_info *edac_dci = file->private_data;
        struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
        const struct edac_device_prv_data *priv = drvdata->data;
        void *generic_ptr = edac_dci->dev;

        if (!user_buf || get_user(trig_type, user_buf))
                return -EFAULT;

        if (!priv->alloc_mem)
                return -ENOMEM;

        /*
         * Note that generic_ptr is initialized to the device * but in
         * some alloc_functions, this is overridden and returns data.
         */
        ptemp = priv->alloc_mem(priv->trig_alloc_sz, &generic_ptr);
        if (!ptemp) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "Inject: Buffer Allocation error\n");
                return -ENOMEM;
        }

        if (trig_type == ALTR_UE_TRIGGER_CHAR)
                error_mask = priv->ue_set_mask;
        else
                error_mask = priv->ce_set_mask;

        edac_printk(KERN_ALERT, EDAC_DEVICE,
                    "Trigger Error Mask (0x%X)\n", error_mask);

        local_irq_save(flags);
        /* write ECC corrupted data out. */
        for (i = 0; i < (priv->trig_alloc_sz / sizeof(*ptemp)); i++) {
                /* Read data so we're in the correct state */
                rmb();
                if (READ_ONCE(ptemp[i]))
                        result = -1;
                /* Toggle Error bit (it is latched), leave ECC enabled */
                writel(error_mask, (drvdata->base + priv->set_err_ofst));
                writel(priv->ecc_enable_mask, (drvdata->base +
                                               priv->set_err_ofst));
                ptemp[i] = i;
        }
        /* Ensure it has been written out */
        wmb();
        local_irq_restore(flags);

        if (result)
                edac_printk(KERN_ERR, EDAC_DEVICE, "Mem Not Cleared\n");

        /* Read out written data. ECC error caused here */
        for (i = 0; i < ALTR_TRIGGER_READ_WRD_CNT; i++)
                if (READ_ONCE(ptemp[i]) != i)
                        edac_printk(KERN_ERR, EDAC_DEVICE,
                                    "Read doesn't match written data\n");

        if (priv->free_mem)
                priv->free_mem(ptemp, priv->trig_alloc_sz, generic_ptr);

        return count;
}

static const struct file_operations altr_edac_device_inject_fops __maybe_unused = {
        .open = simple_open,
        .write = altr_edac_device_trig,
        .llseek = generic_file_llseek,
};

static ssize_t __maybe_unused
altr_edac_a10_device_trig(struct file *file, const char __user *user_buf,
                          size_t count, loff_t *ppos);

static const struct file_operations altr_edac_a10_device_inject_fops __maybe_unused = {
        .open = simple_open,
        .write = altr_edac_a10_device_trig,
        .llseek = generic_file_llseek,
};

static ssize_t __maybe_unused
altr_edac_a10_device_trig2(struct file *file, const char __user *user_buf,
                           size_t count, loff_t *ppos);

static const struct file_operations altr_edac_a10_device_inject2_fops __maybe_unused = {
        .open = simple_open,
        .write = altr_edac_a10_device_trig2,
        .llseek = generic_file_llseek,
};

static void altr_create_edacdev_dbgfs(struct edac_device_ctl_info *edac_dci,
                                      const struct edac_device_prv_data *priv)
{
        struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;

        if (!IS_ENABLED(CONFIG_EDAC_DEBUG))
                return;

        drvdata->debugfs_dir = edac_debugfs_create_dir(drvdata->edac_dev_name);
        if (!drvdata->debugfs_dir)
                return;

        if (!edac_debugfs_create_file("altr_trigger", S_IWUSR,
                                      drvdata->debugfs_dir, edac_dci,
                                      priv->inject_fops))
                debugfs_remove_recursive(drvdata->debugfs_dir);
}

static const struct of_device_id altr_edac_device_of_match[] = {
#ifdef CONFIG_EDAC_ALTERA_L2C
        { .compatible = "altr,socfpga-l2-ecc", .data = &l2ecc_data },
#endif
#ifdef CONFIG_EDAC_ALTERA_OCRAM
        { .compatible = "altr,socfpga-ocram-ecc", .data = &ocramecc_data },
#endif
        {},
};
MODULE_DEVICE_TABLE(of, altr_edac_device_of_match);

/*
 * altr_edac_device_probe()
 *      This is a generic EDAC device driver that will support
 *      various Altera memory devices such as the L2 cache ECC and
 *      OCRAM ECC as well as the memories for other peripherals.
 *      Module specific initialization is done by passing the
 *      function index in the device tree.
 */
static int altr_edac_device_probe(struct platform_device *pdev)
{
        struct edac_device_ctl_info *dci;
        struct altr_edac_device_dev *drvdata;
        struct resource *r;
        int res = 0;
        struct device_node *np = pdev->dev.of_node;
        char *ecc_name = (char *)np->name;
        static int dev_instance;

        if (!devres_open_group(&pdev->dev, NULL, GFP_KERNEL)) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "Unable to open devm\n");
                return -ENOMEM;
        }

        r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
        if (!r) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "Unable to get mem resource\n");
                res = -ENODEV;
                goto fail;
        }

        if (!devm_request_mem_region(&pdev->dev, r->start, resource_size(r),
                                     dev_name(&pdev->dev))) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "%s:Error requesting mem region\n", ecc_name);
                res = -EBUSY;
                goto fail;
        }

        dci = edac_device_alloc_ctl_info(sizeof(*drvdata), ecc_name,
                                         1, ecc_name, 1, 0, dev_instance++);

        if (!dci) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "%s: Unable to allocate EDAC device\n", ecc_name);
                res = -ENOMEM;
                goto fail;
        }

        drvdata = dci->pvt_info;
        dci->dev = &pdev->dev;
        platform_set_drvdata(pdev, dci);
        drvdata->edac_dev_name = ecc_name;

        drvdata->base = devm_ioremap(&pdev->dev, r->start, resource_size(r));
        if (!drvdata->base) {
                res = -ENOMEM;
                goto fail1;
        }

        /* Get driver specific data for this EDAC device */
        drvdata->data = of_match_node(altr_edac_device_of_match, np)->data;

        /* Check specific dependencies for the module */
        if (drvdata->data->setup) {
                res = drvdata->data->setup(drvdata);
                if (res)
                        goto fail1;
        }

        drvdata->sb_irq = platform_get_irq(pdev, 0);
        res = devm_request_irq(&pdev->dev, drvdata->sb_irq,
                               altr_edac_device_handler,
                               0, dev_name(&pdev->dev), dci);
        if (res)
                goto fail1;

        drvdata->db_irq = platform_get_irq(pdev, 1);
        res = devm_request_irq(&pdev->dev, drvdata->db_irq,
                               altr_edac_device_handler,
                               0, dev_name(&pdev->dev), dci);
        if (res)
                goto fail1;

        dci->mod_name = "Altera ECC Manager";
        dci->dev_name = drvdata->edac_dev_name;

        res = edac_device_add_device(dci);
        if (res)
                goto fail1;

        altr_create_edacdev_dbgfs(dci, drvdata->data);

        devres_close_group(&pdev->dev, NULL);

        return 0;

fail1:
        edac_device_free_ctl_info(dci);
fail:
        devres_release_group(&pdev->dev, NULL);
        edac_printk(KERN_ERR, EDAC_DEVICE,
                    "%s:Error setting up EDAC device: %d\n", ecc_name, res);

        return res;
}

static void altr_edac_device_remove(struct platform_device *pdev)
{
        struct edac_device_ctl_info *dci = platform_get_drvdata(pdev);
        struct altr_edac_device_dev *drvdata = dci->pvt_info;

        debugfs_remove_recursive(drvdata->debugfs_dir);
        edac_device_del_device(&pdev->dev);
        edac_device_free_ctl_info(dci);
}

static struct platform_driver altr_edac_device_driver = {
        .probe =  altr_edac_device_probe,
        .remove = altr_edac_device_remove,
        .driver = {
                .name = "altr_edac_device",
                .of_match_table = altr_edac_device_of_match,
        },
};
module_platform_driver(altr_edac_device_driver);

/******************* Arria10 Device ECC Shared Functions *****************/

/*
 *  Test for memory's ECC dependencies upon entry because platform specific
 *  startup should have initialized the memory and enabled the ECC.
 *  Can't turn on ECC here because accessing un-initialized memory will
 *  cause CE/UE errors possibly causing an ABORT.
 */
static int __maybe_unused
altr_check_ecc_deps(struct altr_edac_device_dev *device)
{
        void __iomem  *base = device->base;
        const struct edac_device_prv_data *prv = device->data;

        if (readl(base + prv->ecc_en_ofst) & prv->ecc_enable_mask)
                return 0;

        edac_printk(KERN_ERR, EDAC_DEVICE,
                    "%s: No ECC present or ECC disabled.\n",
                    device->edac_dev_name);
        return -ENODEV;
}

static irqreturn_t __maybe_unused altr_edac_a10_ecc_irq(int irq, void *dev_id)
{
        struct altr_edac_device_dev *dci = dev_id;
        void __iomem  *base = dci->base;

        if (irq == dci->sb_irq) {
                writel(ALTR_A10_ECC_SERRPENA,
                       base + ALTR_A10_ECC_INTSTAT_OFST);
                edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name);

                return IRQ_HANDLED;
        } else if (irq == dci->db_irq) {
                writel(ALTR_A10_ECC_DERRPENA,
                       base + ALTR_A10_ECC_INTSTAT_OFST);
                edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name);
                if (dci->data->panic)
                        panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");

                return IRQ_HANDLED;
        }

        WARN_ON(1);

        return IRQ_NONE;
}

/******************* Arria10 Memory Buffer Functions *********************/

static inline int a10_get_irq_mask(struct device_node *np)
{
        int irq;
        const u32 *handle = of_get_property(np, "interrupts", NULL);

        if (!handle)
                return -ENODEV;
        irq = be32_to_cpup(handle);
        return irq;
}

static inline void ecc_set_bits(u32 bit_mask, void __iomem *ioaddr)
{
        u32 value = readl(ioaddr);

        value |= bit_mask;
        writel(value, ioaddr);
}

static inline void ecc_clear_bits(u32 bit_mask, void __iomem *ioaddr)
{
        u32 value = readl(ioaddr);

        value &= ~bit_mask;
        writel(value, ioaddr);
}

static inline int ecc_test_bits(u32 bit_mask, void __iomem *ioaddr)
{
        u32 value = readl(ioaddr);

        return (value & bit_mask) ? 1 : 0;
}

/*
 * This function uses the memory initialization block in the Arria10 ECC
 * controller to initialize/clear the entire memory data and ECC data.
 */
static int __maybe_unused altr_init_memory_port(void __iomem *ioaddr, int port)
{
        int limit = ALTR_A10_ECC_INIT_WATCHDOG_10US;
        u32 init_mask, stat_mask, clear_mask;
        int ret = 0;

        if (port) {
                init_mask = ALTR_A10_ECC_INITB;
                stat_mask = ALTR_A10_ECC_INITCOMPLETEB;
                clear_mask = ALTR_A10_ECC_ERRPENB_MASK;
        } else {
                init_mask = ALTR_A10_ECC_INITA;
                stat_mask = ALTR_A10_ECC_INITCOMPLETEA;
                clear_mask = ALTR_A10_ECC_ERRPENA_MASK;
        }

        ecc_set_bits(init_mask, (ioaddr + ALTR_A10_ECC_CTRL_OFST));
        while (limit--) {
                if (ecc_test_bits(stat_mask,
                                  (ioaddr + ALTR_A10_ECC_INITSTAT_OFST)))
                        break;
                udelay(1);
        }
        if (limit < 0)
                ret = -EBUSY;

        /* Clear any pending ECC interrupts */
        writel(clear_mask, (ioaddr + ALTR_A10_ECC_INTSTAT_OFST));

        return ret;
}

static __init int __maybe_unused
altr_init_a10_ecc_block(struct device_node *np, u32 irq_mask,
                        u32 ecc_ctrl_en_mask, bool dual_port)
{
        int ret = 0;
        void __iomem *ecc_block_base;
        struct regmap *ecc_mgr_map;
        char *ecc_name;
        struct device_node *np_eccmgr;

        ecc_name = (char *)np->name;

        /* Get the ECC Manager - parent of the device EDACs */
        np_eccmgr = of_get_parent(np);

        ecc_mgr_map =
                altr_sysmgr_regmap_lookup_by_phandle(np_eccmgr,
                                                     "altr,sysmgr-syscon");

        of_node_put(np_eccmgr);
        if (IS_ERR(ecc_mgr_map)) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "Unable to get syscon altr,sysmgr-syscon\n");
                return -ENODEV;
        }

        /* Map the ECC Block */
        ecc_block_base = of_iomap(np, 0);
        if (!ecc_block_base) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "Unable to map %s ECC block\n", ecc_name);
                return -ENODEV;
        }

        /* Disable ECC */
        regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST, irq_mask);
        writel(ALTR_A10_ECC_SERRINTEN,
               (ecc_block_base + ALTR_A10_ECC_ERRINTENR_OFST));
        ecc_clear_bits(ecc_ctrl_en_mask,
                       (ecc_block_base + ALTR_A10_ECC_CTRL_OFST));
        /* Ensure all writes complete */
        wmb();
        /* Use HW initialization block to initialize memory for ECC */
        ret = altr_init_memory_port(ecc_block_base, 0);
        if (ret) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "ECC: cannot init %s PORTA memory\n", ecc_name);
                goto out;
        }

        if (dual_port) {
                ret = altr_init_memory_port(ecc_block_base, 1);
                if (ret) {
                        edac_printk(KERN_ERR, EDAC_DEVICE,
                                    "ECC: cannot init %s PORTB memory\n",
                                    ecc_name);
                        goto out;
                }
        }

        /* Enable ECC */
        ecc_set_bits(ecc_ctrl_en_mask, (ecc_block_base +
                                        ALTR_A10_ECC_CTRL_OFST));
        writel(ALTR_A10_ECC_SERRINTEN,
               (ecc_block_base + ALTR_A10_ECC_ERRINTENS_OFST));
        regmap_write(ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST, irq_mask);
        /* Ensure all writes complete */
        wmb();
out:
        iounmap(ecc_block_base);
        return ret;
}

static int validate_parent_available(struct device_node *np);
static const struct of_device_id altr_edac_a10_device_of_match[];
static int __init __maybe_unused altr_init_a10_ecc_device_type(char *compat)
{
        int irq;
        struct device_node *child, *np;

        np = of_find_compatible_node(NULL, NULL,
                                     "altr,socfpga-a10-ecc-manager");
        if (!np) {
                edac_printk(KERN_ERR, EDAC_DEVICE, "ECC Manager not found\n");
                return -ENODEV;
        }

        for_each_child_of_node(np, child) {
                const struct of_device_id *pdev_id;
                const struct edac_device_prv_data *prv;

                if (!of_device_is_available(child))
                        continue;
                if (!of_device_is_compatible(child, compat))
                        continue;

                if (validate_parent_available(child))
                        continue;

                irq = a10_get_irq_mask(child);
                if (irq < 0)
                        continue;

                /* Get matching node and check for valid result */
                pdev_id = of_match_node(altr_edac_a10_device_of_match, child);
                if (IS_ERR_OR_NULL(pdev_id))
                        continue;

                /* Validate private data pointer before dereferencing */
                prv = pdev_id->data;
                if (!prv)
                        continue;

                altr_init_a10_ecc_block(child, BIT(irq),
                                        prv->ecc_enable_mask, 0);
        }

        of_node_put(np);
        return 0;
}

/*********************** SDRAM EDAC Device Functions *********************/

#ifdef CONFIG_EDAC_ALTERA_SDRAM

/*
 * A legacy U-Boot bug only enabled memory mapped access to the ECC Enable
 * register if ECC is enabled. Linux checks the ECC Enable register to
 * determine ECC status.
 * Use an SMC call (which always works) to determine ECC enablement.
 */
static int altr_s10_sdram_check_ecc_deps(struct altr_edac_device_dev *device)
{
        const struct edac_device_prv_data *prv = device->data;
        unsigned long sdram_ecc_addr;
        struct arm_smccc_res result;
        struct device_node *np;
        phys_addr_t sdram_addr;
        u32 read_reg;
        int ret;

        np = of_find_compatible_node(NULL, NULL, "altr,sdr-ctl");
        if (!np)
                goto sdram_err;

        sdram_addr = of_translate_address(np, of_get_address(np, 0,
                                                             NULL, NULL));
        of_node_put(np);
        sdram_ecc_addr = (unsigned long)sdram_addr + prv->ecc_en_ofst;
        arm_smccc_smc(INTEL_SIP_SMC_REG_READ, sdram_ecc_addr,
                      0, 0, 0, 0, 0, 0, &result);
        read_reg = (unsigned int)result.a1;
        ret = (int)result.a0;
        if (!ret && (read_reg & prv->ecc_enable_mask))
                return 0;

sdram_err:
        edac_printk(KERN_ERR, EDAC_DEVICE,
                    "%s: No ECC present or ECC disabled.\n",
                    device->edac_dev_name);
        return -ENODEV;
}

static const struct edac_device_prv_data s10_sdramecc_data = {
        .setup = altr_s10_sdram_check_ecc_deps,
        .ce_clear_mask = ALTR_S10_ECC_SERRPENA,
        .ue_clear_mask = ALTR_S10_ECC_DERRPENA,
        .ecc_enable_mask = ALTR_S10_ECC_EN,
        .ecc_en_ofst = ALTR_S10_ECC_CTRL_SDRAM_OFST,
        .ce_set_mask = ALTR_S10_ECC_TSERRA,
        .ue_set_mask = ALTR_S10_ECC_TDERRA,
        .set_err_ofst = ALTR_S10_ECC_INTTEST_OFST,
        .ecc_irq_handler = altr_edac_a10_ecc_irq,
        .inject_fops = &altr_edac_a10_device_inject_fops,
};
#endif /* CONFIG_EDAC_ALTERA_SDRAM */

/*********************** OCRAM EDAC Device Functions *********************/

#ifdef CONFIG_EDAC_ALTERA_OCRAM

static void *ocram_alloc_mem(size_t size, void **other)
{
        struct device_node *np;
        struct gen_pool *gp;
        void *sram_addr;

        np = of_find_compatible_node(NULL, NULL, "altr,socfpga-ocram-ecc");
        if (!np)
                return NULL;

        gp = of_gen_pool_get(np, "iram", 0);
        of_node_put(np);
        if (!gp)
                return NULL;

        sram_addr = (void *)gen_pool_alloc(gp, size);
        if (!sram_addr)
                return NULL;

        memset(sram_addr, 0, size);
        /* Ensure data is written out */
        wmb();

        /* Remember this handle for freeing  later */
        *other = gp;

        return sram_addr;
}

static void ocram_free_mem(void *p, size_t size, void *other)
{
        gen_pool_free((struct gen_pool *)other, (unsigned long)p, size);
}

static const struct edac_device_prv_data ocramecc_data = {
        .setup = altr_check_ecc_deps,
        .ce_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_SERR),
        .ue_clear_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_DERR),
        .alloc_mem = ocram_alloc_mem,
        .free_mem = ocram_free_mem,
        .ecc_enable_mask = ALTR_OCR_ECC_EN,
        .ecc_en_ofst = ALTR_OCR_ECC_REG_OFFSET,
        .ce_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJS),
        .ue_set_mask = (ALTR_OCR_ECC_EN | ALTR_OCR_ECC_INJD),
        .set_err_ofst = ALTR_OCR_ECC_REG_OFFSET,
        .trig_alloc_sz = ALTR_TRIG_OCRAM_BYTE_SIZE,
        .inject_fops = &altr_edac_device_inject_fops,
};

static int __maybe_unused
altr_check_ocram_deps_init(struct altr_edac_device_dev *device)
{
        void __iomem  *base = device->base;
        int ret;

        ret = altr_check_ecc_deps(device);
        if (ret)
                return ret;

        /*
         * Verify that OCRAM has been initialized.
         * During a warm reset, OCRAM contents are retained, but the control
         * and status registers are reset to their default values. Therefore,
         * ECC must be explicitly re-enabled in the control register.
         * Error condition: if INITCOMPLETEA is clear and ECC_EN is already set.
         */
        if (!ecc_test_bits(ALTR_A10_ECC_INITCOMPLETEA,
                           (base + ALTR_A10_ECC_INITSTAT_OFST))) {
                if (!ecc_test_bits(ALTR_A10_ECC_EN,
                                   (base + ALTR_A10_ECC_CTRL_OFST)))
                        ecc_set_bits(ALTR_A10_ECC_EN,
                                     (base + ALTR_A10_ECC_CTRL_OFST));
                else
                        return -ENODEV;
        }

        /* Enable IRQ on Single Bit Error */
        writel(ALTR_A10_ECC_SERRINTEN, (base + ALTR_A10_ECC_ERRINTENS_OFST));
        /* Ensure all writes complete */
        wmb();

        return 0;
}

static const struct edac_device_prv_data a10_ocramecc_data = {
        .setup = altr_check_ocram_deps_init,
        .ce_clear_mask = ALTR_A10_ECC_SERRPENA,
        .ue_clear_mask = ALTR_A10_ECC_DERRPENA,
        .irq_status_mask = A10_SYSMGR_ECC_INTSTAT_OCRAM,
        .ecc_enable_mask = ALTR_A10_OCRAM_ECC_EN_CTL,
        .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
        .ce_set_mask = ALTR_A10_ECC_TSERRA,
        .ue_set_mask = ALTR_A10_ECC_TDERRA,
        .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
        .ecc_irq_handler = altr_edac_a10_ecc_irq,
        .inject_fops = &altr_edac_a10_device_inject2_fops,
        /*
         * OCRAM panic on uncorrectable error because sleep/resume
         * functions and FPGA contents are stored in OCRAM. Prefer
         * a kernel panic over executing/loading corrupted data.
         */
        .panic = true,
};

#endif  /* CONFIG_EDAC_ALTERA_OCRAM */

/********************* L2 Cache EDAC Device Functions ********************/

#ifdef CONFIG_EDAC_ALTERA_L2C

static void *l2_alloc_mem(size_t size, void **other)
{
        struct device *dev = *other;
        void *ptemp = devm_kzalloc(dev, size, GFP_KERNEL);

        if (!ptemp)
                return NULL;

        /* Make sure everything is written out */
        wmb();

        /*
         * Clean all cache levels up to LoC (includes L2)
         * This ensures the corrupted data is written into
         * L2 cache for readback test (which causes ECC error).
         */
        flush_cache_all();

        return ptemp;
}

static void l2_free_mem(void *p, size_t size, void *other)
{
        struct device *dev = other;

        if (dev && p)
                devm_kfree(dev, p);
}

/*
 * altr_l2_check_deps()
 *      Test for L2 cache ECC dependencies upon entry because
 *      platform specific startup should have initialized the L2
 *      memory and enabled the ECC.
 *      Bail if ECC is not enabled.
 *      Note that L2 Cache Enable is forced at build time.
 */
static int altr_l2_check_deps(struct altr_edac_device_dev *device)
{
        void __iomem *base = device->base;
        const struct edac_device_prv_data *prv = device->data;

        if ((readl(base) & prv->ecc_enable_mask) ==
             prv->ecc_enable_mask)
                return 0;

        edac_printk(KERN_ERR, EDAC_DEVICE,
                    "L2: No ECC present, or ECC disabled\n");
        return -ENODEV;
}

static irqreturn_t altr_edac_a10_l2_irq(int irq, void *dev_id)
{
        struct altr_edac_device_dev *dci = dev_id;

        if (irq == dci->sb_irq) {
                regmap_write(dci->edac->ecc_mgr_map,
                             A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST,
                             A10_SYSGMR_MPU_CLEAR_L2_ECC_SB);
                edac_device_handle_ce(dci->edac_dev, 0, 0, dci->edac_dev_name);

                return IRQ_HANDLED;
        } else if (irq == dci->db_irq) {
                regmap_write(dci->edac->ecc_mgr_map,
                             A10_SYSGMR_MPU_CLEAR_L2_ECC_OFST,
                             A10_SYSGMR_MPU_CLEAR_L2_ECC_MB);
                edac_device_handle_ue(dci->edac_dev, 0, 0, dci->edac_dev_name);
                panic("\nEDAC:ECC_DEVICE[Uncorrectable errors]\n");

                return IRQ_HANDLED;
        }

        WARN_ON(1);

        return IRQ_NONE;
}

static const struct edac_device_prv_data l2ecc_data = {
        .setup = altr_l2_check_deps,
        .ce_clear_mask = 0,
        .ue_clear_mask = 0,
        .alloc_mem = l2_alloc_mem,
        .free_mem = l2_free_mem,
        .ecc_enable_mask = ALTR_L2_ECC_EN,
        .ce_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJS),
        .ue_set_mask = (ALTR_L2_ECC_EN | ALTR_L2_ECC_INJD),
        .set_err_ofst = ALTR_L2_ECC_REG_OFFSET,
        .trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
        .inject_fops = &altr_edac_device_inject_fops,
};

static const struct edac_device_prv_data a10_l2ecc_data = {
        .setup = altr_l2_check_deps,
        .ce_clear_mask = ALTR_A10_L2_ECC_SERR_CLR,
        .ue_clear_mask = ALTR_A10_L2_ECC_MERR_CLR,
        .irq_status_mask = A10_SYSMGR_ECC_INTSTAT_L2,
        .alloc_mem = l2_alloc_mem,
        .free_mem = l2_free_mem,
        .ecc_enable_mask = ALTR_A10_L2_ECC_EN_CTL,
        .ce_set_mask = ALTR_A10_L2_ECC_CE_INJ_MASK,
        .ue_set_mask = ALTR_A10_L2_ECC_UE_INJ_MASK,
        .set_err_ofst = ALTR_A10_L2_ECC_INJ_OFST,
        .ecc_irq_handler = altr_edac_a10_l2_irq,
        .trig_alloc_sz = ALTR_TRIG_L2C_BYTE_SIZE,
        .inject_fops = &altr_edac_device_inject_fops,
};

#endif  /* CONFIG_EDAC_ALTERA_L2C */

/********************* Ethernet Device Functions ********************/

#ifdef CONFIG_EDAC_ALTERA_ETHERNET

static int __init socfpga_init_ethernet_ecc(struct altr_edac_device_dev *dev)
{
        int ret;

        ret = altr_init_a10_ecc_device_type("altr,socfpga-eth-mac-ecc");
        if (ret)
                return ret;

        return altr_check_ecc_deps(dev);
}

static const struct edac_device_prv_data a10_enetecc_data = {
        .setup = socfpga_init_ethernet_ecc,
        .ce_clear_mask = ALTR_A10_ECC_SERRPENA,
        .ue_clear_mask = ALTR_A10_ECC_DERRPENA,
        .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
        .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
        .ce_set_mask = ALTR_A10_ECC_TSERRA,
        .ue_set_mask = ALTR_A10_ECC_TDERRA,
        .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
        .ecc_irq_handler = altr_edac_a10_ecc_irq,
        .inject_fops = &altr_edac_a10_device_inject_fops,
};

#endif  /* CONFIG_EDAC_ALTERA_ETHERNET */

/********************** NAND Device Functions **********************/

#ifdef CONFIG_EDAC_ALTERA_NAND

static int __init socfpga_init_nand_ecc(struct altr_edac_device_dev *device)
{
        int ret;

        ret = altr_init_a10_ecc_device_type("altr,socfpga-nand-ecc");
        if (ret)
                return ret;

        return altr_check_ecc_deps(device);
}

static const struct edac_device_prv_data a10_nandecc_data = {
        .setup = socfpga_init_nand_ecc,
        .ce_clear_mask = ALTR_A10_ECC_SERRPENA,
        .ue_clear_mask = ALTR_A10_ECC_DERRPENA,
        .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
        .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
        .ce_set_mask = ALTR_A10_ECC_TSERRA,
        .ue_set_mask = ALTR_A10_ECC_TDERRA,
        .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
        .ecc_irq_handler = altr_edac_a10_ecc_irq,
        .inject_fops = &altr_edac_a10_device_inject_fops,
};

#endif  /* CONFIG_EDAC_ALTERA_NAND */

/********************** DMA Device Functions **********************/

#ifdef CONFIG_EDAC_ALTERA_DMA

static int __init socfpga_init_dma_ecc(struct altr_edac_device_dev *device)
{
        int ret;

        ret = altr_init_a10_ecc_device_type("altr,socfpga-dma-ecc");
        if (ret)
                return ret;

        return altr_check_ecc_deps(device);
}

static const struct edac_device_prv_data a10_dmaecc_data = {
        .setup = socfpga_init_dma_ecc,
        .ce_clear_mask = ALTR_A10_ECC_SERRPENA,
        .ue_clear_mask = ALTR_A10_ECC_DERRPENA,
        .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
        .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
        .ce_set_mask = ALTR_A10_ECC_TSERRA,
        .ue_set_mask = ALTR_A10_ECC_TDERRA,
        .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
        .ecc_irq_handler = altr_edac_a10_ecc_irq,
        .inject_fops = &altr_edac_a10_device_inject_fops,
};

#endif  /* CONFIG_EDAC_ALTERA_DMA */

/********************** USB Device Functions **********************/

#ifdef CONFIG_EDAC_ALTERA_USB

static int __init socfpga_init_usb_ecc(struct altr_edac_device_dev *device)
{
        int ret;

        ret = altr_init_a10_ecc_device_type("altr,socfpga-usb-ecc");
        if (ret)
                return ret;

        return altr_check_ecc_deps(device);
}

static const struct edac_device_prv_data a10_usbecc_data = {
        .setup = socfpga_init_usb_ecc,
        .ce_clear_mask = ALTR_A10_ECC_SERRPENA,
        .ue_clear_mask = ALTR_A10_ECC_DERRPENA,
        .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
        .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
        .ce_set_mask = ALTR_A10_ECC_TSERRA,
        .ue_set_mask = ALTR_A10_ECC_TDERRA,
        .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
        .ecc_irq_handler = altr_edac_a10_ecc_irq,
        .inject_fops = &altr_edac_a10_device_inject_fops,
};

#endif  /* CONFIG_EDAC_ALTERA_USB */

/********************** QSPI Device Functions **********************/

#ifdef CONFIG_EDAC_ALTERA_QSPI

static int __init socfpga_init_qspi_ecc(struct altr_edac_device_dev *device)
{
        int ret;

        ret = altr_init_a10_ecc_device_type("altr,socfpga-qspi-ecc");
        if (ret)
                return ret;

        return altr_check_ecc_deps(device);
}

static const struct edac_device_prv_data a10_qspiecc_data = {
        .setup = socfpga_init_qspi_ecc,
        .ce_clear_mask = ALTR_A10_ECC_SERRPENA,
        .ue_clear_mask = ALTR_A10_ECC_DERRPENA,
        .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
        .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
        .ce_set_mask = ALTR_A10_ECC_TSERRA,
        .ue_set_mask = ALTR_A10_ECC_TDERRA,
        .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
        .ecc_irq_handler = altr_edac_a10_ecc_irq,
        .inject_fops = &altr_edac_a10_device_inject_fops,
};

#endif  /* CONFIG_EDAC_ALTERA_QSPI */

/********************* SDMMC Device Functions **********************/

#ifdef CONFIG_EDAC_ALTERA_SDMMC

static const struct edac_device_prv_data a10_sdmmceccb_data;
static int altr_portb_setup(struct altr_edac_device_dev *device)
{
        struct edac_device_ctl_info *dci;
        struct altr_edac_device_dev *altdev;
        char *ecc_name = "sdmmcb-ecc";
        int edac_idx, rc;
        struct device_node *np;
        const struct edac_device_prv_data *prv = &a10_sdmmceccb_data;

        rc = altr_check_ecc_deps(device);
        if (rc)
                return rc;

        np = of_find_compatible_node(NULL, NULL, "altr,socfpga-sdmmc-ecc");
        if (!np) {
                edac_printk(KERN_WARNING, EDAC_DEVICE, "SDMMC node not found\n");
                return -ENODEV;
        }

        /* Create the PortB EDAC device */
        edac_idx = edac_device_alloc_index();
        dci = edac_device_alloc_ctl_info(sizeof(*altdev), ecc_name, 1,
                                         ecc_name, 1, 0, edac_idx);
        if (!dci) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "%s: Unable to allocate PortB EDAC device\n",
                            ecc_name);
                return -ENOMEM;
        }

        /* Initialize the PortB EDAC device structure from PortA structure */
        altdev = dci->pvt_info;
        *altdev = *device;

        if (!devres_open_group(&altdev->ddev, altr_portb_setup, GFP_KERNEL))
                return -ENOMEM;

        /* Update PortB specific values */
        altdev->edac_dev_name = ecc_name;
        altdev->edac_idx = edac_idx;
        altdev->edac_dev = dci;
        altdev->data = prv;
        dci->dev = &altdev->ddev;
        dci->ctl_name = "Altera ECC Manager";
        dci->mod_name = ecc_name;
        dci->dev_name = ecc_name;

        /*
         * Update the PortB IRQs - A10 has 4, S10 has 2, Index accordingly
         *
         * FIXME: Instead of ifdefs with different architectures the driver
         *        should properly use compatibles.
         */
#ifdef CONFIG_64BIT
        altdev->sb_irq = irq_of_parse_and_map(np, 1);
#else
        altdev->sb_irq = irq_of_parse_and_map(np, 2);
#endif
        if (!altdev->sb_irq) {
                edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB SBIRQ alloc\n");
                rc = -ENODEV;
                goto err_release_group_1;
        }
        rc = devm_request_irq(&altdev->ddev, altdev->sb_irq,
                              prv->ecc_irq_handler, IRQF_TRIGGER_HIGH,
                              ecc_name, altdev);
        if (rc) {
                edac_printk(KERN_ERR, EDAC_DEVICE, "PortB SBERR IRQ error\n");
                goto err_release_group_1;
        }

#ifdef CONFIG_64BIT
        /* Use IRQ to determine SError origin instead of assigning IRQ */
        rc = of_property_read_u32_index(np, "interrupts", 1, &altdev->db_irq);
        if (rc) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "Error PortB DBIRQ alloc\n");
                goto err_release_group_1;
        }
#else
        altdev->db_irq = irq_of_parse_and_map(np, 3);
        if (!altdev->db_irq) {
                edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
                rc = -ENODEV;
                goto err_release_group_1;
        }
        rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
                              prv->ecc_irq_handler, IRQF_TRIGGER_HIGH,
                              ecc_name, altdev);
        if (rc) {
                edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n");
                goto err_release_group_1;
        }
#endif

        rc = edac_device_add_device(dci);
        if (rc) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "edac_device_add_device portB failed\n");
                rc = -ENOMEM;
                goto err_release_group_1;
        }
        altr_create_edacdev_dbgfs(dci, prv);

        list_add(&altdev->next, &altdev->edac->a10_ecc_devices);

        devres_remove_group(&altdev->ddev, altr_portb_setup);

        return 0;

err_release_group_1:
        edac_device_free_ctl_info(dci);
        devres_release_group(&altdev->ddev, altr_portb_setup);
        edac_printk(KERN_ERR, EDAC_DEVICE,
                    "%s:Error setting up EDAC device: %d\n", ecc_name, rc);
        return rc;
}

static int __init socfpga_init_sdmmc_ecc(struct altr_edac_device_dev *device)
{
        int rc = -ENODEV;
        struct device_node *child;

        child = of_find_compatible_node(NULL, NULL, "altr,socfpga-sdmmc-ecc");
        if (!child)
                return -ENODEV;

        if (!of_device_is_available(child))
                goto exit;

        if (validate_parent_available(child))
                goto exit;

        /* Init portB */
        rc = altr_init_a10_ecc_block(child, ALTR_A10_SDMMC_IRQ_MASK,
                                     a10_sdmmceccb_data.ecc_enable_mask, 1);
        if (rc)
                goto exit;

        /* Setup portB */
        return altr_portb_setup(device);

exit:
        of_node_put(child);
        return rc;
}

static irqreturn_t altr_edac_a10_ecc_irq_portb(int irq, void *dev_id)
{
        struct altr_edac_device_dev *ad = dev_id;
        void __iomem  *base = ad->base;
        const struct edac_device_prv_data *priv = ad->data;

        if (irq == ad->sb_irq) {
                writel(priv->ce_clear_mask,
                       base + ALTR_A10_ECC_INTSTAT_OFST);
                edac_device_handle_ce(ad->edac_dev, 0, 0, ad->edac_dev_name);
                return IRQ_HANDLED;
        } else if (irq == ad->db_irq) {
                writel(priv->ue_clear_mask,
                       base + ALTR_A10_ECC_INTSTAT_OFST);
                edac_device_handle_ue(ad->edac_dev, 0, 0, ad->edac_dev_name);
                return IRQ_HANDLED;
        }

        WARN_ONCE(1, "Unhandled IRQ%d on Port B.", irq);

        return IRQ_NONE;
}

static const struct edac_device_prv_data a10_sdmmcecca_data = {
        .setup = socfpga_init_sdmmc_ecc,
        .ce_clear_mask = ALTR_A10_ECC_SERRPENA,
        .ue_clear_mask = ALTR_A10_ECC_DERRPENA,
        .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
        .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
        .ce_set_mask = ALTR_A10_ECC_SERRPENA,
        .ue_set_mask = ALTR_A10_ECC_DERRPENA,
        .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
        .ecc_irq_handler = altr_edac_a10_ecc_irq,
        .inject_fops = &altr_edac_a10_device_inject_fops,
};

static const struct edac_device_prv_data a10_sdmmceccb_data = {
        .setup = socfpga_init_sdmmc_ecc,
        .ce_clear_mask = ALTR_A10_ECC_SERRPENB,
        .ue_clear_mask = ALTR_A10_ECC_DERRPENB,
        .ecc_enable_mask = ALTR_A10_COMMON_ECC_EN_CTL,
        .ecc_en_ofst = ALTR_A10_ECC_CTRL_OFST,
        .ce_set_mask = ALTR_A10_ECC_TSERRB,
        .ue_set_mask = ALTR_A10_ECC_TDERRB,
        .set_err_ofst = ALTR_A10_ECC_INTTEST_OFST,
        .ecc_irq_handler = altr_edac_a10_ecc_irq_portb,
        .inject_fops = &altr_edac_a10_device_inject_fops,
};

#endif  /* CONFIG_EDAC_ALTERA_SDMMC */

/********************* Arria10 EDAC Device Functions *************************/
static const struct of_device_id altr_edac_a10_device_of_match[] = {
#ifdef CONFIG_EDAC_ALTERA_L2C
        { .compatible = "altr,socfpga-a10-l2-ecc", .data = &a10_l2ecc_data },
#endif
#ifdef CONFIG_EDAC_ALTERA_OCRAM
        { .compatible = "altr,socfpga-a10-ocram-ecc",
          .data = &a10_ocramecc_data },
#endif
#ifdef CONFIG_EDAC_ALTERA_ETHERNET
        { .compatible = "altr,socfpga-eth-mac-ecc",
          .data = &a10_enetecc_data },
#endif
#ifdef CONFIG_EDAC_ALTERA_NAND
        { .compatible = "altr,socfpga-nand-ecc", .data = &a10_nandecc_data },
#endif
#ifdef CONFIG_EDAC_ALTERA_DMA
        { .compatible = "altr,socfpga-dma-ecc", .data = &a10_dmaecc_data },
#endif
#ifdef CONFIG_EDAC_ALTERA_USB
        { .compatible = "altr,socfpga-usb-ecc", .data = &a10_usbecc_data },
#endif
#ifdef CONFIG_EDAC_ALTERA_QSPI
        { .compatible = "altr,socfpga-qspi-ecc", .data = &a10_qspiecc_data },
#endif
#ifdef CONFIG_EDAC_ALTERA_SDMMC
        { .compatible = "altr,socfpga-sdmmc-ecc", .data = &a10_sdmmcecca_data },
#endif
#ifdef CONFIG_EDAC_ALTERA_SDRAM
        { .compatible = "altr,sdram-edac-s10", .data = &s10_sdramecc_data },
#endif
        {},
};
MODULE_DEVICE_TABLE(of, altr_edac_a10_device_of_match);

/*
 * The Arria10 EDAC Device Functions differ from the Cyclone5/Arria5
 * because 2 IRQs are shared among the all ECC peripherals. The ECC
 * manager manages the IRQs and the children.
 * Based on xgene_edac.c peripheral code.
 */

static ssize_t __maybe_unused
altr_edac_a10_device_trig(struct file *file, const char __user *user_buf,
                          size_t count, loff_t *ppos)
{
        struct edac_device_ctl_info *edac_dci = file->private_data;
        struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
        const struct edac_device_prv_data *priv = drvdata->data;
        void __iomem *set_addr = (drvdata->base + priv->set_err_ofst);
        unsigned long flags;
        u8 trig_type;

        if (!user_buf || get_user(trig_type, user_buf))
                return -EFAULT;

        local_irq_save(flags);
        if (trig_type == ALTR_UE_TRIGGER_CHAR)
                writew(priv->ue_set_mask, set_addr);
        else
                writew(priv->ce_set_mask, set_addr);

        /* Ensure the interrupt test bits are set */
        wmb();
        local_irq_restore(flags);

        return count;
}

/*
 * The Stratix10 EDAC Error Injection Functions differ from Arria10
 * slightly. A few Arria10 peripherals can use this injection function.
 * Inject the error into the memory and then readback to trigger the IRQ.
 */
static ssize_t __maybe_unused
altr_edac_a10_device_trig2(struct file *file, const char __user *user_buf,
                           size_t count, loff_t *ppos)
{
        struct edac_device_ctl_info *edac_dci = file->private_data;
        struct altr_edac_device_dev *drvdata = edac_dci->pvt_info;
        const struct edac_device_prv_data *priv = drvdata->data;
        void __iomem *set_addr = (drvdata->base + priv->set_err_ofst);
        unsigned long flags;
        u8 trig_type;

        if (!user_buf || get_user(trig_type, user_buf))
                return -EFAULT;

        local_irq_save(flags);
        if (trig_type == ALTR_UE_TRIGGER_CHAR) {
                writew(priv->ue_set_mask, set_addr);
        } else {
                /* Setup read/write of 4 bytes */
                writel(ECC_WORD_WRITE, drvdata->base + ECC_BLK_DBYTECTRL_OFST);
                /* Setup Address to 0 */
                writel(0, drvdata->base + ECC_BLK_ADDRESS_OFST);
                /* Setup accctrl to read & ecc & data override */
                writel(ECC_READ_EDOVR, drvdata->base + ECC_BLK_ACCCTRL_OFST);
                /* Kick it. */
                writel(ECC_XACT_KICK, drvdata->base + ECC_BLK_STARTACC_OFST);
                /* Setup write for single bit change */
                writel(readl(drvdata->base + ECC_BLK_RDATA0_OFST) ^ 0x1,
                       drvdata->base + ECC_BLK_WDATA0_OFST);
                writel(readl(drvdata->base + ECC_BLK_RDATA1_OFST),
                       drvdata->base + ECC_BLK_WDATA1_OFST);
                writel(readl(drvdata->base + ECC_BLK_RDATA2_OFST),
                       drvdata->base + ECC_BLK_WDATA2_OFST);
                writel(readl(drvdata->base + ECC_BLK_RDATA3_OFST),
                       drvdata->base + ECC_BLK_WDATA3_OFST);

                /* Copy Read ECC to Write ECC */
                writel(readl(drvdata->base + ECC_BLK_RECC0_OFST),
                       drvdata->base + ECC_BLK_WECC0_OFST);
                writel(readl(drvdata->base + ECC_BLK_RECC1_OFST),
                       drvdata->base + ECC_BLK_WECC1_OFST);
                /* Setup accctrl to write & ecc override & data override */
                writel(ECC_WRITE_EDOVR, drvdata->base + ECC_BLK_ACCCTRL_OFST);
                /* Kick it. */
                writel(ECC_XACT_KICK, drvdata->base + ECC_BLK_STARTACC_OFST);
                /* Setup accctrl to read & ecc overwrite & data overwrite */
                writel(ECC_READ_EDOVR, drvdata->base + ECC_BLK_ACCCTRL_OFST);
                /* Kick it. */
                writel(ECC_XACT_KICK, drvdata->base + ECC_BLK_STARTACC_OFST);
        }

        /* Ensure the interrupt test bits are set */
        wmb();
        local_irq_restore(flags);

        return count;
}

static void altr_edac_a10_irq_handler(struct irq_desc *desc)
{
        int dberr, bit, sm_offset, irq_status;
        struct altr_arria10_edac *edac = irq_desc_get_handler_data(desc);
        struct irq_chip *chip = irq_desc_get_chip(desc);
        int irq = irq_desc_get_irq(desc);
        unsigned long bits;

        dberr = (irq == edac->db_irq) ? 1 : 0;
        sm_offset = dberr ? A10_SYSMGR_ECC_INTSTAT_DERR_OFST :
                            A10_SYSMGR_ECC_INTSTAT_SERR_OFST;

        chained_irq_enter(chip, desc);

        regmap_read(edac->ecc_mgr_map, sm_offset, &irq_status);

        bits = irq_status;
        for_each_set_bit(bit, &bits, 32)
                generic_handle_domain_irq(edac->domain, dberr * 32 + bit);

        chained_irq_exit(chip, desc);
}

static int validate_parent_available(struct device_node *np)
{
        struct device_node *parent;
        int ret = 0;

        /* SDRAM must be present for Linux (implied parent) */
        if (of_device_is_compatible(np, "altr,sdram-edac-s10"))
                return 0;

        /* Ensure parent device is enabled if parent node exists */
        parent = of_parse_phandle(np, "altr,ecc-parent", 0);
        if (parent && !of_device_is_available(parent))
                ret = -ENODEV;

        of_node_put(parent);
        return ret;
}

static int get_s10_sdram_edac_resource(struct device_node *np,
                                       struct resource *res)
{
        struct device_node *parent;
        int ret;

        parent = of_parse_phandle(np, "altr,sdr-syscon", 0);
        if (!parent)
                return -ENODEV;

        ret = of_address_to_resource(parent, 0, res);
        of_node_put(parent);

        return ret;
}

static int altr_edac_a10_device_add(struct altr_arria10_edac *edac,
                                    struct device_node *np)
{
        struct edac_device_ctl_info *dci;
        struct altr_edac_device_dev *altdev;
        char *ecc_name = (char *)np->name;
        struct resource res;
        int edac_idx;
        int rc = 0;
        const struct edac_device_prv_data *prv;
        /* Get matching node and check for valid result */
        const struct of_device_id *pdev_id =
                of_match_node(altr_edac_a10_device_of_match, np);
        if (IS_ERR_OR_NULL(pdev_id))
                return -ENODEV;

        /* Get driver specific data for this EDAC device */
        prv = pdev_id->data;
        if (IS_ERR_OR_NULL(prv))
                return -ENODEV;

        if (validate_parent_available(np))
                return -ENODEV;

        if (!devres_open_group(edac->dev, altr_edac_a10_device_add, GFP_KERNEL))
                return -ENOMEM;

        if (of_device_is_compatible(np, "altr,sdram-edac-s10"))
                rc = get_s10_sdram_edac_resource(np, &res);
        else
                rc = of_address_to_resource(np, 0, &res);

        if (rc < 0) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "%s: no resource address\n", ecc_name);
                goto err_release_group;
        }

        edac_idx = edac_device_alloc_index();
        dci = edac_device_alloc_ctl_info(sizeof(*altdev), ecc_name,
                                         1, ecc_name, 1, 0, edac_idx);

        if (!dci) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "%s: Unable to allocate EDAC device\n", ecc_name);
                rc = -ENOMEM;
                goto err_release_group;
        }

        altdev = dci->pvt_info;
        dci->dev = edac->dev;
        altdev->edac_dev_name = ecc_name;
        altdev->edac_idx = edac_idx;
        altdev->edac = edac;
        altdev->edac_dev = dci;
        altdev->data = prv;
        altdev->ddev = *edac->dev;
        dci->dev = &altdev->ddev;
        dci->ctl_name = "Altera ECC Manager";
        dci->mod_name = ecc_name;
        dci->dev_name = ecc_name;

        altdev->base = devm_ioremap_resource(edac->dev, &res);
        if (IS_ERR(altdev->base)) {
                rc = PTR_ERR(altdev->base);
                goto err_release_group1;
        }

        /* Check specific dependencies for the module */
        if (altdev->data->setup) {
                rc = altdev->data->setup(altdev);
                if (rc)
                        goto err_release_group1;
        }

        altdev->sb_irq = irq_of_parse_and_map(np, 0);
        if (!altdev->sb_irq) {
                edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating SBIRQ\n");
                rc = -ENODEV;
                goto err_release_group1;
        }
        rc = devm_request_irq(edac->dev, altdev->sb_irq, prv->ecc_irq_handler,
                              IRQF_TRIGGER_HIGH, ecc_name, altdev);
        if (rc) {
                edac_printk(KERN_ERR, EDAC_DEVICE, "No SBERR IRQ resource\n");
                goto err_release_group1;
        }

#ifdef CONFIG_64BIT
        /* Use IRQ to determine SError origin instead of assigning IRQ */
        rc = of_property_read_u32_index(np, "interrupts", 0, &altdev->db_irq);
        if (rc) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "Unable to parse DB IRQ index\n");
                goto err_release_group1;
        }
#else
        altdev->db_irq = irq_of_parse_and_map(np, 1);
        if (!altdev->db_irq) {
                edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating DBIRQ\n");
                rc = -ENODEV;
                goto err_release_group1;
        }
        rc = devm_request_irq(edac->dev, altdev->db_irq, prv->ecc_irq_handler,
                              IRQF_TRIGGER_HIGH,
                              ecc_name, altdev);
        if (rc) {
                edac_printk(KERN_ERR, EDAC_DEVICE, "No DBERR IRQ resource\n");
                goto err_release_group1;
        }
#endif

        rc = edac_device_add_device(dci);
        if (rc) {
                dev_err(edac->dev, "edac_device_add_device failed\n");
                rc = -ENOMEM;
                goto err_release_group1;
        }

        altr_create_edacdev_dbgfs(dci, prv);

        list_add(&altdev->next, &edac->a10_ecc_devices);

        devres_remove_group(edac->dev, altr_edac_a10_device_add);

        return 0;

err_release_group1:
        edac_device_free_ctl_info(dci);
err_release_group:
        devres_release_group(edac->dev, NULL);
        edac_printk(KERN_ERR, EDAC_DEVICE,
                    "%s:Error setting up EDAC device: %d\n", ecc_name, rc);

        return rc;
}

static void a10_eccmgr_irq_mask(struct irq_data *d)
{
        struct altr_arria10_edac *edac = irq_data_get_irq_chip_data(d);

        regmap_write(edac->ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST,
                     BIT(d->hwirq));
}

static void a10_eccmgr_irq_unmask(struct irq_data *d)
{
        struct altr_arria10_edac *edac = irq_data_get_irq_chip_data(d);

        regmap_write(edac->ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_CLR_OFST,
                     BIT(d->hwirq));
}

static int a10_eccmgr_irqdomain_map(struct irq_domain *d, unsigned int irq,
                                    irq_hw_number_t hwirq)
{
        struct altr_arria10_edac *edac = d->host_data;

        irq_set_chip_and_handler(irq, &edac->irq_chip, handle_simple_irq);
        irq_set_chip_data(irq, edac);
        irq_set_noprobe(irq);

        return 0;
}

static const struct irq_domain_ops a10_eccmgr_ic_ops = {
        .map = a10_eccmgr_irqdomain_map,
        .xlate = irq_domain_xlate_twocell,
};

/************** Stratix 10 EDAC Double Bit Error Handler ************/
#define to_a10edac(p, m) container_of(p, struct altr_arria10_edac, m)

#ifdef CONFIG_64BIT
/* panic routine issues reboot on non-zero panic_timeout */
extern int panic_timeout;

/*
 * The double bit error is handled through SError which is fatal. This is
 * called as a panic notifier to printout ECC error info as part of the panic.
 */
static int s10_edac_dberr_handler(struct notifier_block *this,
                                  unsigned long event, void *ptr)
{
        struct altr_arria10_edac *edac = to_a10edac(this, panic_notifier);
        int err_addr, dberror;

        regmap_read(edac->ecc_mgr_map, S10_SYSMGR_ECC_INTSTAT_DERR_OFST,
                    &dberror);
        regmap_write(edac->ecc_mgr_map, S10_SYSMGR_UE_VAL_OFST, dberror);
        if (dberror & S10_DBE_IRQ_MASK) {
                struct list_head *position;
                struct altr_edac_device_dev *ed;
                struct arm_smccc_res result;

                /* Find the matching DBE in the list of devices */
                list_for_each(position, &edac->a10_ecc_devices) {
                        ed = list_entry(position, struct altr_edac_device_dev,
                                        next);
                        if (!(BIT(ed->db_irq) & dberror))
                                continue;

                        writel(ALTR_A10_ECC_DERRPENA,
                               ed->base + ALTR_A10_ECC_INTSTAT_OFST);
                        err_addr = readl(ed->base + ALTR_S10_DERR_ADDRA_OFST);
                        regmap_write(edac->ecc_mgr_map,
                                     S10_SYSMGR_UE_ADDR_OFST, err_addr);
                        edac_printk(KERN_ERR, EDAC_DEVICE,
                                    "EDAC: [Fatal DBE on %s @ 0x%08X]\n",
                                    ed->edac_dev_name, err_addr);
                        break;
                }
                /* Notify the System through SMC. Reboot delay = 1 second */
                panic_timeout = 1;
                arm_smccc_smc(INTEL_SIP_SMC_ECC_DBE, dberror, 0, 0, 0, 0,
                              0, 0, &result);
        }

        return NOTIFY_DONE;
}
#endif

/****************** Arria 10 EDAC Probe Function *********************/
static int altr_edac_a10_probe(struct platform_device *pdev)
{
        struct altr_arria10_edac *edac;
        struct device_node *child;

        edac = devm_kzalloc(&pdev->dev, sizeof(*edac), GFP_KERNEL);
        if (!edac)
                return -ENOMEM;

        edac->dev = &pdev->dev;
        platform_set_drvdata(pdev, edac);
        INIT_LIST_HEAD(&edac->a10_ecc_devices);

        edac->ecc_mgr_map =
                altr_sysmgr_regmap_lookup_by_phandle(pdev->dev.of_node,
                                                     "altr,sysmgr-syscon");

        if (IS_ERR(edac->ecc_mgr_map)) {
                edac_printk(KERN_ERR, EDAC_DEVICE,
                            "Unable to get syscon altr,sysmgr-syscon\n");
                return PTR_ERR(edac->ecc_mgr_map);
        }

        /* Set irq mask for DDR SBE to avoid any pending irq before registration */
        regmap_write(edac->ecc_mgr_map, A10_SYSMGR_ECC_INTMASK_SET_OFST,
                     (A10_SYSMGR_ECC_INTMASK_SDMMCB | A10_SYSMGR_ECC_INTMASK_DDR0));

        edac->irq_chip.name = pdev->dev.of_node->name;
        edac->irq_chip.irq_mask = a10_eccmgr_irq_mask;
        edac->irq_chip.irq_unmask = a10_eccmgr_irq_unmask;
        edac->domain = irq_domain_create_linear(dev_fwnode(&pdev->dev), 64, &a10_eccmgr_ic_ops,
                                                edac);
        if (!edac->domain) {
                dev_err(&pdev->dev, "Error adding IRQ domain\n");
                return -ENOMEM;
        }

        edac->sb_irq = platform_get_irq(pdev, 0);
        if (edac->sb_irq < 0)
                return edac->sb_irq;

        irq_set_chained_handler_and_data(edac->sb_irq,
                                         altr_edac_a10_irq_handler,
                                         edac);

#ifdef CONFIG_64BIT
        {
                int dberror, err_addr;

                edac->panic_notifier.notifier_call = s10_edac_dberr_handler;
                atomic_notifier_chain_register(&panic_notifier_list,
                                               &edac->panic_notifier);

                /* Printout a message if uncorrectable error previously. */
                regmap_read(edac->ecc_mgr_map, S10_SYSMGR_UE_VAL_OFST,
                            &dberror);
                if (dberror) {
                        regmap_read(edac->ecc_mgr_map, S10_SYSMGR_UE_ADDR_OFST,
                                    &err_addr);
                        edac_printk(KERN_ERR, EDAC_DEVICE,
                                    "Previous Boot UE detected[0x%X] @ 0x%X\n",
                                    dberror, err_addr);
                        /* Reset the sticky registers */
                        regmap_write(edac->ecc_mgr_map,
                                     S10_SYSMGR_UE_VAL_OFST, 0);
                        regmap_write(edac->ecc_mgr_map,
                                     S10_SYSMGR_UE_ADDR_OFST, 0);
                }
        }
#else
        edac->db_irq = platform_get_irq(pdev, 1);
        if (edac->db_irq < 0)
                return edac->db_irq;

        irq_set_chained_handler_and_data(edac->db_irq,
                                         altr_edac_a10_irq_handler, edac);
#endif

        for_each_child_of_node(pdev->dev.of_node, child) {
                if (!of_device_is_available(child))
                        continue;

                if (of_match_node(altr_edac_a10_device_of_match, child))
                        altr_edac_a10_device_add(edac, child);

#ifdef CONFIG_EDAC_ALTERA_SDRAM
                else if (of_device_is_compatible(child, "altr,sdram-edac-a10"))
                        of_platform_populate(pdev->dev.of_node,
                                             altr_sdram_ctrl_of_match,
                                             NULL, &pdev->dev);
#endif
        }

        return 0;
}

static const struct of_device_id altr_edac_a10_of_match[] = {
        { .compatible = "altr,socfpga-a10-ecc-manager" },
        { .compatible = "altr,socfpga-s10-ecc-manager" },
        {},
};
MODULE_DEVICE_TABLE(of, altr_edac_a10_of_match);

static struct platform_driver altr_edac_a10_driver = {
        .probe =  altr_edac_a10_probe,
        .driver = {
                .name = "socfpga_a10_ecc_manager",
                .of_match_table = altr_edac_a10_of_match,
        },
};
module_platform_driver(altr_edac_a10_driver);

MODULE_AUTHOR("Thor Thayer");
MODULE_DESCRIPTION("EDAC Driver for Altera Memories");