root/drivers/usb/isp1760/isp1760-hcd.c 
// SPDX-License-Identifier: GPL-2.0
/*
 * Driver for the NXP ISP1760 chip
 *
 * However, the code might contain some bugs. What doesn't work for sure is:
 * - ISO
 * - OTG
 e The interrupt line is configured as active low, level.
 *
 * (c) 2007 Sebastian Siewior <bigeasy@linutronix.de>
 *
 * (c) 2011 Arvid Brodin <arvid.brodin@enea.com>
 *
 * Copyright 2021 Linaro, Rui Miguel Silva <rui.silva@linaro.org>
 *
 */
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/list.h>
#include <linux/usb.h>
#include <linux/usb/hcd.h>
#include <linux/debugfs.h>
#include <linux/uaccess.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/mm.h>
#include <linux/timer.h>
#include <linux/unaligned.h>
#include <asm/cacheflush.h>

#include "isp1760-core.h"
#include "isp1760-hcd.h"
#include "isp1760-regs.h"

static struct kmem_cache *qtd_cachep;
static struct kmem_cache *qh_cachep;
static struct kmem_cache *urb_listitem_cachep;

typedef void (packet_enqueue)(struct usb_hcd *hcd, struct isp1760_qh *qh,
                struct isp1760_qtd *qtd);

static inline struct isp1760_hcd *hcd_to_priv(struct usb_hcd *hcd)
{
        return *(struct isp1760_hcd **)hcd->hcd_priv;
}

#define dw_to_le32(x)   (cpu_to_le32((__force u32)x))
#define le32_to_dw(x)   ((__force __dw)(le32_to_cpu(x)))

/* urb state*/
#define DELETE_URB              (0x0008)
#define NO_TRANSFER_ACTIVE      (0xffffffff)

/* Philips Proprietary Transfer Descriptor (PTD) */
typedef __u32 __bitwise __dw;
struct ptd {
        __dw dw0;
        __dw dw1;
        __dw dw2;
        __dw dw3;
        __dw dw4;
        __dw dw5;
        __dw dw6;
        __dw dw7;
};

struct ptd_le32 {
        __le32 dw0;
        __le32 dw1;
        __le32 dw2;
        __le32 dw3;
        __le32 dw4;
        __le32 dw5;
        __le32 dw6;
        __le32 dw7;
};

#define PTD_OFFSET              0x0400
#define ISO_PTD_OFFSET          0x0400
#define INT_PTD_OFFSET          0x0800
#define ATL_PTD_OFFSET          0x0c00
#define PAYLOAD_OFFSET          0x1000

#define ISP_BANK_0              0x00
#define ISP_BANK_1              0x01
#define ISP_BANK_2              0x02
#define ISP_BANK_3              0x03

#define TO_DW(x)        ((__force __dw)x)
#define TO_U32(x)       ((__force u32)x)

 /* ATL */
 /* DW0 */
#define DW0_VALID_BIT                   TO_DW(1)
#define FROM_DW0_VALID(x)               (TO_U32(x) & 0x01)
#define TO_DW0_LENGTH(x)                TO_DW((((u32)x) << 3))
#define TO_DW0_MAXPACKET(x)             TO_DW((((u32)x) << 18))
#define TO_DW0_MULTI(x)                 TO_DW((((u32)x) << 29))
#define TO_DW0_ENDPOINT(x)              TO_DW((((u32)x) << 31))
/* DW1 */
#define TO_DW1_DEVICE_ADDR(x)           TO_DW((((u32)x) << 3))
#define TO_DW1_PID_TOKEN(x)             TO_DW((((u32)x) << 10))
#define DW1_TRANS_BULK                  TO_DW(((u32)2 << 12))
#define DW1_TRANS_INT                   TO_DW(((u32)3 << 12))
#define DW1_TRANS_SPLIT                 TO_DW(((u32)1 << 14))
#define DW1_SE_USB_LOSPEED              TO_DW(((u32)2 << 16))
#define TO_DW1_PORT_NUM(x)              TO_DW((((u32)x) << 18))
#define TO_DW1_HUB_NUM(x)               TO_DW((((u32)x) << 25))
/* DW2 */
#define TO_DW2_DATA_START_ADDR(x)       TO_DW((((u32)x) << 8))
#define TO_DW2_RL(x)                    TO_DW(((x) << 25))
#define FROM_DW2_RL(x)                  ((TO_U32(x) >> 25) & 0xf)
/* DW3 */
#define FROM_DW3_NRBYTESTRANSFERRED(x)          TO_U32((x) & 0x3fff)
#define FROM_DW3_SCS_NRBYTESTRANSFERRED(x)      TO_U32((x) & 0x07ff)
#define TO_DW3_NAKCOUNT(x)              TO_DW(((x) << 19))
#define FROM_DW3_NAKCOUNT(x)            ((TO_U32(x) >> 19) & 0xf)
#define TO_DW3_CERR(x)                  TO_DW(((x) << 23))
#define FROM_DW3_CERR(x)                ((TO_U32(x) >> 23) & 0x3)
#define TO_DW3_DATA_TOGGLE(x)           TO_DW(((x) << 25))
#define FROM_DW3_DATA_TOGGLE(x)         ((TO_U32(x) >> 25) & 0x1)
#define TO_DW3_PING(x)                  TO_DW(((x) << 26))
#define FROM_DW3_PING(x)                ((TO_U32(x) >> 26) & 0x1)
#define DW3_ERROR_BIT                   TO_DW((1 << 28))
#define DW3_BABBLE_BIT                  TO_DW((1 << 29))
#define DW3_HALT_BIT                    TO_DW((1 << 30))
#define DW3_ACTIVE_BIT                  TO_DW((1 << 31))
#define FROM_DW3_ACTIVE(x)              ((TO_U32(x) >> 31) & 0x01)

#define INT_UNDERRUN                    (1 << 2)
#define INT_BABBLE                      (1 << 1)
#define INT_EXACT                       (1 << 0)

#define SETUP_PID       (2)
#define IN_PID          (1)
#define OUT_PID         (0)

/* Errata 1 */
#define RL_COUNTER      (0)
#define NAK_COUNTER     (0)
#define ERR_COUNTER     (3)

struct isp1760_qtd {
        u8 packet_type;
        void *data_buffer;
        u32 payload_addr;

        /* the rest is HCD-private */
        struct list_head qtd_list;
        struct urb *urb;
        size_t length;
        size_t actual_length;

        /* QTD_ENQUEUED:        waiting for transfer (inactive) */
        /* QTD_PAYLOAD_ALLOC:   chip mem has been allocated for payload */
        /* QTD_XFER_STARTED:    valid ptd has been written to isp176x - only
                                interrupt handler may touch this qtd! */
        /* QTD_XFER_COMPLETE:   payload has been transferred successfully */
        /* QTD_RETIRE:          transfer error/abort qtd */
#define QTD_ENQUEUED            0
#define QTD_PAYLOAD_ALLOC       1
#define QTD_XFER_STARTED        2
#define QTD_XFER_COMPLETE       3
#define QTD_RETIRE              4
        u32 status;
};

/* Queue head, one for each active endpoint */
struct isp1760_qh {
        struct list_head qh_list;
        struct list_head qtd_list;
        u32 toggle;
        u32 ping;
        int slot;
        int tt_buffer_dirty;    /* See USB2.0 spec section 11.17.5 */
};

struct urb_listitem {
        struct list_head urb_list;
        struct urb *urb;
};

static const u32 isp176x_hc_portsc1_fields[] = {
        [PORT_OWNER]            = BIT(13),
        [PORT_POWER]            = BIT(12),
        [PORT_LSTATUS]          = BIT(10),
        [PORT_RESET]            = BIT(8),
        [PORT_SUSPEND]          = BIT(7),
        [PORT_RESUME]           = BIT(6),
        [PORT_PE]               = BIT(2),
        [PORT_CSC]              = BIT(1),
        [PORT_CONNECT]          = BIT(0),
};

/*
 * Access functions for isp176x registers regmap fields
 */
static u32 isp1760_hcd_read(struct usb_hcd *hcd, u32 field)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        return isp1760_field_read(priv->fields, field);
}

/*
 * We need, in isp176x, to write directly the values to the portsc1
 * register so it will make the other values to trigger.
 */
static void isp1760_hcd_portsc1_set_clear(struct isp1760_hcd *priv, u32 field,
                                          u32 val)
{
        u32 bit = isp176x_hc_portsc1_fields[field];
        u16 portsc1_reg = priv->is_isp1763 ? ISP1763_HC_PORTSC1 :
                ISP176x_HC_PORTSC1;
        u32 port_status = readl(priv->base + portsc1_reg);

        if (val)
                writel(port_status | bit, priv->base + portsc1_reg);
        else
                writel(port_status & ~bit, priv->base + portsc1_reg);
}

static void isp1760_hcd_write(struct usb_hcd *hcd, u32 field, u32 val)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        if (unlikely((field >= PORT_OWNER && field <= PORT_CONNECT)))
                return isp1760_hcd_portsc1_set_clear(priv, field, val);

        isp1760_field_write(priv->fields, field, val);
}

static void isp1760_hcd_set(struct usb_hcd *hcd, u32 field)
{
        isp1760_hcd_write(hcd, field, 0xFFFFFFFF);
}

static void isp1760_hcd_clear(struct usb_hcd *hcd, u32 field)
{
        isp1760_hcd_write(hcd, field, 0);
}

static int isp1760_hcd_set_and_wait(struct usb_hcd *hcd, u32 field,
                                    u32 timeout_us)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        u32 val;

        isp1760_hcd_set(hcd, field);

        return regmap_field_read_poll_timeout(priv->fields[field], val,
                                              val, 0, timeout_us);
}

static int isp1760_hcd_set_and_wait_swap(struct usb_hcd *hcd, u32 field,
                                         u32 timeout_us)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        u32 val;

        isp1760_hcd_set(hcd, field);

        return regmap_field_read_poll_timeout(priv->fields[field], val,
                                              !val, 0, timeout_us);
}

static int isp1760_hcd_clear_and_wait(struct usb_hcd *hcd, u32 field,
                                      u32 timeout_us)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        u32 val;

        isp1760_hcd_clear(hcd, field);

        return regmap_field_read_poll_timeout(priv->fields[field], val,
                                              !val, 0, timeout_us);
}

static bool isp1760_hcd_is_set(struct usb_hcd *hcd, u32 field)
{
        return !!isp1760_hcd_read(hcd, field);
}

static bool isp1760_hcd_ppc_is_set(struct usb_hcd *hcd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        if (priv->is_isp1763)
                return true;

        return isp1760_hcd_is_set(hcd, HCS_PPC);
}

static u32 isp1760_hcd_n_ports(struct usb_hcd *hcd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        if (priv->is_isp1763)
                return 1;

        return isp1760_hcd_read(hcd, HCS_N_PORTS);
}

/*
 * Access functions for isp176x memory (offset >= 0x0400).
 *
 * bank_reads8() reads memory locations prefetched by an earlier write to
 * HC_MEMORY_REG (see isp176x datasheet). Unless you want to do fancy multi-
 * bank optimizations, you should use the more generic mem_read() below.
 *
 * For access to ptd memory, use the specialized ptd_read() and ptd_write()
 * below.
 *
 * These functions copy via MMIO data to/from the device. memcpy_{to|from}io()
 * doesn't quite work because some people have to enforce 32-bit access
 */
static void bank_reads8(void __iomem *src_base, u32 src_offset, u32 bank_addr,
                                                        __u32 *dst, u32 bytes)
{
        __u32 __iomem *src;
        u32 val;
        __u8 *src_byteptr;
        __u8 *dst_byteptr;

        src = src_base + (bank_addr | src_offset);

        if (src_offset < PAYLOAD_OFFSET) {
                while (bytes >= 4) {
                        *dst = readl_relaxed(src);
                        bytes -= 4;
                        src++;
                        dst++;
                }
        } else {
                while (bytes >= 4) {
                        *dst = __raw_readl(src);
                        bytes -= 4;
                        src++;
                        dst++;
                }
        }

        if (!bytes)
                return;

        /* in case we have 3, 2 or 1 by left. The dst buffer may not be fully
         * allocated.
         */
        if (src_offset < PAYLOAD_OFFSET)
                val = readl_relaxed(src);
        else
                val = __raw_readl(src);

        dst_byteptr = (void *) dst;
        src_byteptr = (void *) &val;
        while (bytes > 0) {
                *dst_byteptr = *src_byteptr;
                dst_byteptr++;
                src_byteptr++;
                bytes--;
        }
}

static void isp1760_mem_read(struct usb_hcd *hcd, u32 src_offset, void *dst,
                             u32 bytes)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        isp1760_reg_write(priv->regs, ISP176x_HC_MEMORY, src_offset);
        ndelay(100);

        bank_reads8(priv->base, src_offset, ISP_BANK_0, dst, bytes);
}

/*
 * ISP1763 does not have the banks direct host controller memory access,
 * needs to use the HC_DATA register. Add data read/write according to this,
 * and also adjust 16bit access.
 */
static void isp1763_mem_read(struct usb_hcd *hcd, u16 srcaddr,
                             u16 *dstptr, u32 bytes)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        /* Write the starting device address to the hcd memory register */
        isp1760_reg_write(priv->regs, ISP1763_HC_MEMORY, srcaddr);
        ndelay(100); /* Delay between consecutive access */

        /* As long there are at least 16-bit to read ... */
        while (bytes >= 2) {
                *dstptr = __raw_readw(priv->base + ISP1763_HC_DATA);
                bytes -= 2;
                dstptr++;
        }

        /* If there are no more bytes to read, return */
        if (bytes <= 0)
                return;

        *((u8 *)dstptr) = (u8)(readw(priv->base + ISP1763_HC_DATA) & 0xFF);
}

static void mem_read(struct usb_hcd *hcd, u32 src_offset, __u32 *dst,
                     u32 bytes)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        if (!priv->is_isp1763)
                return isp1760_mem_read(hcd, src_offset, (u16 *)dst, bytes);

        isp1763_mem_read(hcd, (u16)src_offset, (u16 *)dst, bytes);
}

static void isp1760_mem_write(void __iomem *dst_base, u32 dst_offset,
                              __u32 const *src, u32 bytes)
{
        __u32 __iomem *dst;

        dst = dst_base + dst_offset;

        if (dst_offset < PAYLOAD_OFFSET) {
                while (bytes >= 4) {
                        writel_relaxed(*src, dst);
                        bytes -= 4;
                        src++;
                        dst++;
                }
        } else {
                while (bytes >= 4) {
                        __raw_writel(*src, dst);
                        bytes -= 4;
                        src++;
                        dst++;
                }
        }

        if (!bytes)
                return;
        /* in case we have 3, 2 or 1 bytes left. The buffer is allocated and the
         * extra bytes should not be read by the HW.
         */

        if (dst_offset < PAYLOAD_OFFSET)
                writel_relaxed(*src, dst);
        else
                __raw_writel(*src, dst);
}

static void isp1763_mem_write(struct usb_hcd *hcd, u16 dstaddr, u16 *src,
                              u32 bytes)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        /* Write the starting device address to the hcd memory register */
        isp1760_reg_write(priv->regs, ISP1763_HC_MEMORY, dstaddr);
        ndelay(100); /* Delay between consecutive access */

        while (bytes >= 2) {
                /* Get and write the data; then adjust the data ptr and len */
                __raw_writew(*src, priv->base + ISP1763_HC_DATA);
                bytes -= 2;
                src++;
        }

        /* If there are no more bytes to process, return */
        if (bytes <= 0)
                return;

        /*
         * The only way to get here is if there is a single byte left,
         * get it and write it to the data reg;
         */
        writew(*((u8 *)src), priv->base + ISP1763_HC_DATA);
}

static void mem_write(struct usb_hcd *hcd, u32 dst_offset, __u32 *src,
                      u32 bytes)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        if (!priv->is_isp1763)
                return isp1760_mem_write(priv->base, dst_offset, src, bytes);

        isp1763_mem_write(hcd, dst_offset, (u16 *)src, bytes);
}

/*
 * Read and write ptds. 'ptd_offset' should be one of ISO_PTD_OFFSET,
 * INT_PTD_OFFSET, and ATL_PTD_OFFSET. 'slot' should be less than 32.
 */
static void isp1760_ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
                             struct ptd *ptd)
{
        u16 src_offset = ptd_offset + slot * sizeof(*ptd);
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        isp1760_reg_write(priv->regs, ISP176x_HC_MEMORY, src_offset);
        ndelay(90);

        bank_reads8(priv->base, src_offset, ISP_BANK_0, (void *)ptd,
                    sizeof(*ptd));
}

static void isp1763_ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
                             struct ptd *ptd)
{
        u16 src_offset = ptd_offset + slot * sizeof(*ptd);
        struct ptd_le32 le32_ptd;

        isp1763_mem_read(hcd, src_offset, (u16 *)&le32_ptd, sizeof(le32_ptd));
        /* Normalize the data obtained */
        ptd->dw0 = le32_to_dw(le32_ptd.dw0);
        ptd->dw1 = le32_to_dw(le32_ptd.dw1);
        ptd->dw2 = le32_to_dw(le32_ptd.dw2);
        ptd->dw3 = le32_to_dw(le32_ptd.dw3);
        ptd->dw4 = le32_to_dw(le32_ptd.dw4);
        ptd->dw5 = le32_to_dw(le32_ptd.dw5);
        ptd->dw6 = le32_to_dw(le32_ptd.dw6);
        ptd->dw7 = le32_to_dw(le32_ptd.dw7);
}

static void ptd_read(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
                     struct ptd *ptd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        if (!priv->is_isp1763)
                return isp1760_ptd_read(hcd, ptd_offset, slot, ptd);

        isp1763_ptd_read(hcd, ptd_offset, slot, ptd);
}

static void isp1763_ptd_write(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
                              struct ptd *cpu_ptd)
{
        u16 dst_offset = ptd_offset + slot * sizeof(*cpu_ptd);
        struct ptd_le32 ptd;

        ptd.dw0 = dw_to_le32(cpu_ptd->dw0);
        ptd.dw1 = dw_to_le32(cpu_ptd->dw1);
        ptd.dw2 = dw_to_le32(cpu_ptd->dw2);
        ptd.dw3 = dw_to_le32(cpu_ptd->dw3);
        ptd.dw4 = dw_to_le32(cpu_ptd->dw4);
        ptd.dw5 = dw_to_le32(cpu_ptd->dw5);
        ptd.dw6 = dw_to_le32(cpu_ptd->dw6);
        ptd.dw7 = dw_to_le32(cpu_ptd->dw7);

        isp1763_mem_write(hcd, dst_offset,  (u16 *)&ptd.dw0,
                          8 * sizeof(ptd.dw0));
}

static void isp1760_ptd_write(void __iomem *base, u32 ptd_offset, u32 slot,
                              struct ptd *ptd)
{
        u32 dst_offset = ptd_offset + slot * sizeof(*ptd);

        /*
         * Make sure dw0 gets written last (after other dw's and after payload)
         *  since it contains the enable bit
         */
        isp1760_mem_write(base, dst_offset + sizeof(ptd->dw0),
                          (__force u32 *)&ptd->dw1, 7 * sizeof(ptd->dw1));
        wmb();
        isp1760_mem_write(base, dst_offset, (__force u32 *)&ptd->dw0,
                          sizeof(ptd->dw0));
}

static void ptd_write(struct usb_hcd *hcd, u32 ptd_offset, u32 slot,
                      struct ptd *ptd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        if (!priv->is_isp1763)
                return isp1760_ptd_write(priv->base, ptd_offset, slot, ptd);

        isp1763_ptd_write(hcd, ptd_offset, slot, ptd);
}

/* memory management of the 60kb on the chip from 0x1000 to 0xffff */
static void init_memory(struct isp1760_hcd *priv)
{
        const struct isp1760_memory_layout *mem = priv->memory_layout;
        int i, j, curr;
        u32 payload_addr;

        payload_addr = PAYLOAD_OFFSET;

        for (i = 0, curr = 0; i < ARRAY_SIZE(mem->blocks); i++, curr += j) {
                for (j = 0; j < mem->blocks[i]; j++) {
                        priv->memory_pool[curr + j].start = payload_addr;
                        priv->memory_pool[curr + j].size = mem->blocks_size[i];
                        priv->memory_pool[curr + j].free = 1;
                        payload_addr += priv->memory_pool[curr + j].size;
                }
        }

        WARN_ON(payload_addr - priv->memory_pool[0].start >
                mem->payload_area_size);
}

static void alloc_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        const struct isp1760_memory_layout *mem = priv->memory_layout;
        int i;

        WARN_ON(qtd->payload_addr);

        if (!qtd->length)
                return;

        for (i = 0; i < mem->payload_blocks; i++) {
                if (priv->memory_pool[i].size >= qtd->length &&
                                priv->memory_pool[i].free) {
                        priv->memory_pool[i].free = 0;
                        qtd->payload_addr = priv->memory_pool[i].start;
                        return;
                }
        }
}

static void free_mem(struct usb_hcd *hcd, struct isp1760_qtd *qtd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        const struct isp1760_memory_layout *mem = priv->memory_layout;
        int i;

        if (!qtd->payload_addr)
                return;

        for (i = 0; i < mem->payload_blocks; i++) {
                if (priv->memory_pool[i].start == qtd->payload_addr) {
                        WARN_ON(priv->memory_pool[i].free);
                        priv->memory_pool[i].free = 1;
                        qtd->payload_addr = 0;
                        return;
                }
        }

        dev_err(hcd->self.controller, "%s: Invalid pointer: %08x\n",
                                                __func__, qtd->payload_addr);
        WARN_ON(1);
        qtd->payload_addr = 0;
}

/* reset a non-running (STS_HALT == 1) controller */
static int ehci_reset(struct usb_hcd *hcd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        hcd->state = HC_STATE_HALT;
        priv->next_statechange = jiffies;

        return isp1760_hcd_set_and_wait_swap(hcd, CMD_RESET, 250 * 1000);
}

static struct isp1760_qh *qh_alloc(gfp_t flags)
{
        struct isp1760_qh *qh;

        qh = kmem_cache_zalloc(qh_cachep, flags);
        if (!qh)
                return NULL;

        INIT_LIST_HEAD(&qh->qh_list);
        INIT_LIST_HEAD(&qh->qtd_list);
        qh->slot = -1;

        return qh;
}

static void qh_free(struct isp1760_qh *qh)
{
        WARN_ON(!list_empty(&qh->qtd_list));
        WARN_ON(qh->slot > -1);
        kmem_cache_free(qh_cachep, qh);
}

/* one-time init, only for memory state */
static int priv_init(struct usb_hcd *hcd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        u32 isoc_cache;
        u32 isoc_thres;
        int i;

        spin_lock_init(&priv->lock);

        for (i = 0; i < QH_END; i++)
                INIT_LIST_HEAD(&priv->qh_list[i]);

        /*
         * hw default: 1K periodic list heads, one per frame.
         * periodic_size can shrink by USBCMD update if hcc_params allows.
         */
        priv->periodic_size = DEFAULT_I_TDPS;

        if (priv->is_isp1763) {
                priv->i_thresh = 2;
                return 0;
        }

        /* controllers may cache some of the periodic schedule ... */
        isoc_cache = isp1760_hcd_read(hcd, HCC_ISOC_CACHE);
        isoc_thres = isp1760_hcd_read(hcd, HCC_ISOC_THRES);

        /* full frame cache */
        if (isoc_cache)
                priv->i_thresh = 8;
        else /* N microframes cached */
                priv->i_thresh = 2 + isoc_thres;

        return 0;
}

static int isp1760_hc_setup(struct usb_hcd *hcd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        u32 atx_reset;
        int result;
        u32 scratch;
        u32 pattern;

        if (priv->is_isp1763)
                pattern = 0xcafe;
        else
                pattern = 0xdeadcafe;

        isp1760_hcd_write(hcd, HC_SCRATCH, pattern);

        /*
         * we do not care about the read value here we just want to
         * change bus pattern.
         */
        isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH);
        scratch = isp1760_hcd_read(hcd, HC_SCRATCH);
        if (scratch != pattern) {
                dev_err(hcd->self.controller, "Scratch test failed. 0x%08x\n",
                        scratch);
                return -ENODEV;
        }

        /*
         * The RESET_HC bit in the SW_RESET register is supposed to reset the
         * host controller without touching the CPU interface registers, but at
         * least on the ISP1761 it seems to behave as the RESET_ALL bit and
         * reset the whole device. We thus can't use it here, so let's reset
         * the host controller through the EHCI USB Command register. The device
         * has been reset in core code anyway, so this shouldn't matter.
         */
        isp1760_hcd_clear(hcd, ISO_BUF_FILL);
        isp1760_hcd_clear(hcd, INT_BUF_FILL);
        isp1760_hcd_clear(hcd, ATL_BUF_FILL);

        isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP);
        isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP);
        isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP);

        result = ehci_reset(hcd);
        if (result)
                return result;

        /* Step 11 passed */

        /* ATL reset */
        if (priv->is_isp1763)
                atx_reset = SW_RESET_RESET_ATX;
        else
                atx_reset = ALL_ATX_RESET;

        isp1760_hcd_set(hcd, atx_reset);
        mdelay(10);
        isp1760_hcd_clear(hcd, atx_reset);

        if (priv->is_isp1763) {
                isp1760_hcd_set(hcd, HW_OTG_DISABLE);
                isp1760_hcd_set(hcd, HW_SW_SEL_HC_DC_CLEAR);
                isp1760_hcd_set(hcd, HW_HC_2_DIS_CLEAR);
                mdelay(10);

                isp1760_hcd_set(hcd, HW_INTF_LOCK);
        }

        isp1760_hcd_set(hcd, HC_INT_IRQ_ENABLE);
        isp1760_hcd_set(hcd, HC_ATL_IRQ_ENABLE);

        return priv_init(hcd);
}

static u32 base_to_chip(u32 base)
{
        return ((base - 0x400) >> 3);
}

static int last_qtd_of_urb(struct isp1760_qtd *qtd, struct isp1760_qh *qh)
{
        struct urb *urb;

        if (list_is_last(&qtd->qtd_list, &qh->qtd_list))
                return 1;

        urb = qtd->urb;
        qtd = list_entry(qtd->qtd_list.next, typeof(*qtd), qtd_list);
        return (qtd->urb != urb);
}

/* magic numbers that can affect system performance */
#define EHCI_TUNE_CERR          3       /* 0-3 qtd retries; 0 == don't stop */
#define EHCI_TUNE_RL_HS         4       /* nak throttle; see 4.9 */
#define EHCI_TUNE_RL_TT         0
#define EHCI_TUNE_MULT_HS       1       /* 1-3 transactions/uframe; 4.10.3 */
#define EHCI_TUNE_MULT_TT       1
#define EHCI_TUNE_FLS           2       /* (small) 256 frame schedule */

static void create_ptd_atl(struct isp1760_qh *qh,
                        struct isp1760_qtd *qtd, struct ptd *ptd)
{
        u32 maxpacket;
        u32 multi;
        u32 rl = RL_COUNTER;
        u32 nak = NAK_COUNTER;

        memset(ptd, 0, sizeof(*ptd));

        /* according to 3.6.2, max packet len can not be > 0x400 */
        maxpacket = usb_maxpacket(qtd->urb->dev, qtd->urb->pipe);
        multi =  1 + ((maxpacket >> 11) & 0x3);
        maxpacket &= 0x7ff;

        /* DW0 */
        ptd->dw0 = DW0_VALID_BIT;
        ptd->dw0 |= TO_DW0_LENGTH(qtd->length);
        ptd->dw0 |= TO_DW0_MAXPACKET(maxpacket);
        ptd->dw0 |= TO_DW0_ENDPOINT(usb_pipeendpoint(qtd->urb->pipe));

        /* DW1 */
        ptd->dw1 = TO_DW((usb_pipeendpoint(qtd->urb->pipe) >> 1));
        ptd->dw1 |= TO_DW1_DEVICE_ADDR(usb_pipedevice(qtd->urb->pipe));
        ptd->dw1 |= TO_DW1_PID_TOKEN(qtd->packet_type);

        if (usb_pipebulk(qtd->urb->pipe))
                ptd->dw1 |= DW1_TRANS_BULK;
        else if  (usb_pipeint(qtd->urb->pipe))
                ptd->dw1 |= DW1_TRANS_INT;

        if (qtd->urb->dev->speed != USB_SPEED_HIGH) {
                /* split transaction */

                ptd->dw1 |= DW1_TRANS_SPLIT;
                if (qtd->urb->dev->speed == USB_SPEED_LOW)
                        ptd->dw1 |= DW1_SE_USB_LOSPEED;

                ptd->dw1 |= TO_DW1_PORT_NUM(qtd->urb->dev->ttport);
                ptd->dw1 |= TO_DW1_HUB_NUM(qtd->urb->dev->tt->hub->devnum);

                /* SE bit for Split INT transfers */
                if (usb_pipeint(qtd->urb->pipe) &&
                                (qtd->urb->dev->speed == USB_SPEED_LOW))
                        ptd->dw1 |= DW1_SE_USB_LOSPEED;

                rl = 0;
                nak = 0;
        } else {
                ptd->dw0 |= TO_DW0_MULTI(multi);
                if (usb_pipecontrol(qtd->urb->pipe) ||
                                                usb_pipebulk(qtd->urb->pipe))
                        ptd->dw3 |= TO_DW3_PING(qh->ping);
        }
        /* DW2 */
        ptd->dw2 = 0;
        ptd->dw2 |= TO_DW2_DATA_START_ADDR(base_to_chip(qtd->payload_addr));
        ptd->dw2 |= TO_DW2_RL(rl);

        /* DW3 */
        ptd->dw3 |= TO_DW3_NAKCOUNT(nak);
        ptd->dw3 |= TO_DW3_DATA_TOGGLE(qh->toggle);
        if (usb_pipecontrol(qtd->urb->pipe)) {
                if (qtd->data_buffer == qtd->urb->setup_packet)
                        ptd->dw3 &= ~TO_DW3_DATA_TOGGLE(1);
                else if (last_qtd_of_urb(qtd, qh))
                        ptd->dw3 |= TO_DW3_DATA_TOGGLE(1);
        }

        ptd->dw3 |= DW3_ACTIVE_BIT;
        /* Cerr */
        ptd->dw3 |= TO_DW3_CERR(ERR_COUNTER);
}

static void transform_add_int(struct isp1760_qh *qh,
                        struct isp1760_qtd *qtd, struct ptd *ptd)
{
        u32 usof;
        u32 period;

        /*
         * Most of this is guessing. ISP1761 datasheet is quite unclear, and
         * the algorithm from the original Philips driver code, which was
         * pretty much used in this driver before as well, is quite horrendous
         * and, i believe, incorrect. The code below follows the datasheet and
         * USB2.0 spec as far as I can tell, and plug/unplug seems to be much
         * more reliable this way (fingers crossed...).
         */

        if (qtd->urb->dev->speed == USB_SPEED_HIGH) {
                /* urb->interval is in units of microframes (1/8 ms) */
                period = qtd->urb->interval >> 3;

                if (qtd->urb->interval > 4)
                        usof = 0x01; /* One bit set =>
                                                interval 1 ms * uFrame-match */
                else if (qtd->urb->interval > 2)
                        usof = 0x22; /* Two bits set => interval 1/2 ms */
                else if (qtd->urb->interval > 1)
                        usof = 0x55; /* Four bits set => interval 1/4 ms */
                else
                        usof = 0xff; /* All bits set => interval 1/8 ms */
        } else {
                /* urb->interval is in units of frames (1 ms) */
                period = qtd->urb->interval;
                usof = 0x0f;            /* Execute Start Split on any of the
                                           four first uFrames */

                /*
                 * First 8 bits in dw5 is uSCS and "specifies which uSOF the
                 * complete split needs to be sent. Valid only for IN." Also,
                 * "All bits can be set to one for every transfer." (p 82,
                 * ISP1761 data sheet.) 0x1c is from Philips driver. Where did
                 * that number come from? 0xff seems to work fine...
                 */
                /* ptd->dw5 = 0x1c; */
                ptd->dw5 = TO_DW(0xff); /* Execute Complete Split on any uFrame */
        }

        period = period >> 1;/* Ensure equal or shorter period than requested */
        period &= 0xf8; /* Mask off too large values and lowest unused 3 bits */

        ptd->dw2 |= TO_DW(period);
        ptd->dw4 = TO_DW(usof);
}

static void create_ptd_int(struct isp1760_qh *qh,
                        struct isp1760_qtd *qtd, struct ptd *ptd)
{
        create_ptd_atl(qh, qtd, ptd);
        transform_add_int(qh, qtd, ptd);
}

static void isp1760_urb_done(struct usb_hcd *hcd, struct urb *urb)
__releases(priv->lock)
__acquires(priv->lock)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        if (!urb->unlinked) {
                if (urb->status == -EINPROGRESS)
                        urb->status = 0;
        }

        if (usb_pipein(urb->pipe) && usb_pipetype(urb->pipe) != PIPE_CONTROL) {
                void *ptr;
                for (ptr = urb->transfer_buffer;
                     ptr < urb->transfer_buffer + urb->transfer_buffer_length;
                     ptr += PAGE_SIZE)
                        flush_dcache_page(virt_to_page(ptr));
        }

        /* complete() can reenter this HCD */
        usb_hcd_unlink_urb_from_ep(hcd, urb);
        spin_unlock(&priv->lock);
        usb_hcd_giveback_urb(hcd, urb, urb->status);
        spin_lock(&priv->lock);
}

static struct isp1760_qtd *qtd_alloc(gfp_t flags, struct urb *urb,
                                                                u8 packet_type)
{
        struct isp1760_qtd *qtd;

        qtd = kmem_cache_zalloc(qtd_cachep, flags);
        if (!qtd)
                return NULL;

        INIT_LIST_HEAD(&qtd->qtd_list);
        qtd->urb = urb;
        qtd->packet_type = packet_type;
        qtd->status = QTD_ENQUEUED;
        qtd->actual_length = 0;

        return qtd;
}

static void qtd_free(struct isp1760_qtd *qtd)
{
        WARN_ON(qtd->payload_addr);
        kmem_cache_free(qtd_cachep, qtd);
}

static void start_bus_transfer(struct usb_hcd *hcd, u32 ptd_offset, int slot,
                                struct isp1760_slotinfo *slots,
                                struct isp1760_qtd *qtd, struct isp1760_qh *qh,
                                struct ptd *ptd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        const struct isp1760_memory_layout *mem = priv->memory_layout;
        int skip_map;

        WARN_ON((slot < 0) || (slot > mem->slot_num - 1));
        WARN_ON(qtd->length && !qtd->payload_addr);
        WARN_ON(slots[slot].qtd);
        WARN_ON(slots[slot].qh);
        WARN_ON(qtd->status != QTD_PAYLOAD_ALLOC);

        if (priv->is_isp1763)
                ndelay(100);

        /* Make sure done map has not triggered from some unlinked transfer */
        if (ptd_offset == ATL_PTD_OFFSET) {
                skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP);
                isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP,
                                  skip_map | (1 << slot));
                priv->atl_done_map |= isp1760_hcd_read(hcd, HC_ATL_PTD_DONEMAP);
                priv->atl_done_map &= ~(1 << slot);
        } else {
                skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP);
                isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP,
                                  skip_map | (1 << slot));
                priv->int_done_map |= isp1760_hcd_read(hcd, HC_INT_PTD_DONEMAP);
                priv->int_done_map &= ~(1 << slot);
        }

        skip_map &= ~(1 << slot);
        qh->slot = slot;
        qtd->status = QTD_XFER_STARTED;
        slots[slot].timestamp = jiffies;
        slots[slot].qtd = qtd;
        slots[slot].qh = qh;
        ptd_write(hcd, ptd_offset, slot, ptd);

        if (ptd_offset == ATL_PTD_OFFSET)
                isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP, skip_map);
        else
                isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP, skip_map);
}

static int is_short_bulk(struct isp1760_qtd *qtd)
{
        return (usb_pipebulk(qtd->urb->pipe) &&
                                        (qtd->actual_length < qtd->length));
}

static void collect_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh,
                                                struct list_head *urb_list)
{
        struct isp1760_qtd *qtd, *qtd_next;
        struct urb_listitem *urb_listitem;
        int last_qtd;

        list_for_each_entry_safe(qtd, qtd_next, &qh->qtd_list, qtd_list) {
                if (qtd->status < QTD_XFER_COMPLETE)
                        break;

                last_qtd = last_qtd_of_urb(qtd, qh);

                if ((!last_qtd) && (qtd->status == QTD_RETIRE))
                        qtd_next->status = QTD_RETIRE;

                if (qtd->status == QTD_XFER_COMPLETE) {
                        if (qtd->actual_length) {
                                switch (qtd->packet_type) {
                                case IN_PID:
                                        mem_read(hcd, qtd->payload_addr,
                                                 qtd->data_buffer,
                                                 qtd->actual_length);
                                        fallthrough;
                                case OUT_PID:
                                        qtd->urb->actual_length +=
                                                        qtd->actual_length;
                                        fallthrough;
                                case SETUP_PID:
                                        break;
                                }
                        }

                        if (is_short_bulk(qtd)) {
                                if (qtd->urb->transfer_flags & URB_SHORT_NOT_OK)
                                        qtd->urb->status = -EREMOTEIO;
                                if (!last_qtd)
                                        qtd_next->status = QTD_RETIRE;
                        }
                }

                if (qtd->payload_addr)
                        free_mem(hcd, qtd);

                if (last_qtd) {
                        if ((qtd->status == QTD_RETIRE) &&
                                        (qtd->urb->status == -EINPROGRESS))
                                qtd->urb->status = -EPIPE;
                        /* Defer calling of urb_done() since it releases lock */
                        urb_listitem = kmem_cache_zalloc(urb_listitem_cachep,
                                                                GFP_ATOMIC);
                        if (unlikely(!urb_listitem))
                                break; /* Try again on next call */
                        urb_listitem->urb = qtd->urb;
                        list_add_tail(&urb_listitem->urb_list, urb_list);
                }

                list_del(&qtd->qtd_list);
                qtd_free(qtd);
        }
}

#define ENQUEUE_DEPTH   2
static void enqueue_qtds(struct usb_hcd *hcd, struct isp1760_qh *qh)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        const struct isp1760_memory_layout *mem = priv->memory_layout;
        int slot_num = mem->slot_num;
        int ptd_offset;
        struct isp1760_slotinfo *slots;
        int curr_slot, free_slot;
        int n;
        struct ptd ptd;
        struct isp1760_qtd *qtd;

        if (unlikely(list_empty(&qh->qtd_list))) {
                WARN_ON(1);
                return;
        }

        /* Make sure this endpoint's TT buffer is clean before queueing ptds */
        if (qh->tt_buffer_dirty)
                return;

        if (usb_pipeint(list_entry(qh->qtd_list.next, struct isp1760_qtd,
                                                        qtd_list)->urb->pipe)) {
                ptd_offset = INT_PTD_OFFSET;
                slots = priv->int_slots;
        } else {
                ptd_offset = ATL_PTD_OFFSET;
                slots = priv->atl_slots;
        }

        free_slot = -1;
        for (curr_slot = 0; curr_slot < slot_num; curr_slot++) {
                if ((free_slot == -1) && (slots[curr_slot].qtd == NULL))
                        free_slot = curr_slot;
                if (slots[curr_slot].qh == qh)
                        break;
        }

        n = 0;
        list_for_each_entry(qtd, &qh->qtd_list, qtd_list) {
                if (qtd->status == QTD_ENQUEUED) {
                        WARN_ON(qtd->payload_addr);
                        alloc_mem(hcd, qtd);
                        if ((qtd->length) && (!qtd->payload_addr))
                                break;

                        if (qtd->length && (qtd->packet_type == SETUP_PID ||
                                            qtd->packet_type == OUT_PID)) {
                                mem_write(hcd, qtd->payload_addr,
                                          qtd->data_buffer, qtd->length);
                        }

                        qtd->status = QTD_PAYLOAD_ALLOC;
                }

                if (qtd->status == QTD_PAYLOAD_ALLOC) {
/*
                        if ((curr_slot > 31) && (free_slot == -1))
                                dev_dbg(hcd->self.controller, "%s: No slot "
                                        "available for transfer\n", __func__);
*/
                        /* Start xfer for this endpoint if not already done */
                        if ((curr_slot > slot_num - 1) && (free_slot > -1)) {
                                if (usb_pipeint(qtd->urb->pipe))
                                        create_ptd_int(qh, qtd, &ptd);
                                else
                                        create_ptd_atl(qh, qtd, &ptd);

                                start_bus_transfer(hcd, ptd_offset, free_slot,
                                                        slots, qtd, qh, &ptd);
                                curr_slot = free_slot;
                        }

                        n++;
                        if (n >= ENQUEUE_DEPTH)
                                break;
                }
        }
}

static void schedule_ptds(struct usb_hcd *hcd)
{
        struct isp1760_hcd *priv;
        struct isp1760_qh *qh, *qh_next;
        struct list_head *ep_queue;
        LIST_HEAD(urb_list);
        struct urb_listitem *urb_listitem, *urb_listitem_next;
        int i;

        if (!hcd) {
                WARN_ON(1);
                return;
        }

        priv = hcd_to_priv(hcd);

        /*
         * check finished/retired xfers, transfer payloads, call urb_done()
         */
        for (i = 0; i < QH_END; i++) {
                ep_queue = &priv->qh_list[i];
                list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list) {
                        collect_qtds(hcd, qh, &urb_list);
                        if (list_empty(&qh->qtd_list))
                                list_del(&qh->qh_list);
                }
        }

        list_for_each_entry_safe(urb_listitem, urb_listitem_next, &urb_list,
                                                                urb_list) {
                isp1760_urb_done(hcd, urb_listitem->urb);
                kmem_cache_free(urb_listitem_cachep, urb_listitem);
        }

        /*
         * Schedule packets for transfer.
         *
         * According to USB2.0 specification:
         *
         * 1st prio: interrupt xfers, up to 80 % of bandwidth
         * 2nd prio: control xfers
         * 3rd prio: bulk xfers
         *
         * ... but let's use a simpler scheme here (mostly because ISP1761 doc
         * is very unclear on how to prioritize traffic):
         *
         * 1) Enqueue any queued control transfers, as long as payload chip mem
         *    and PTD ATL slots are available.
         * 2) Enqueue any queued INT transfers, as long as payload chip mem
         *    and PTD INT slots are available.
         * 3) Enqueue any queued bulk transfers, as long as payload chip mem
         *    and PTD ATL slots are available.
         *
         * Use double buffering (ENQUEUE_DEPTH==2) as a compromise between
         * conservation of chip mem and performance.
         *
         * I'm sure this scheme could be improved upon!
         */
        for (i = 0; i < QH_END; i++) {
                ep_queue = &priv->qh_list[i];
                list_for_each_entry_safe(qh, qh_next, ep_queue, qh_list)
                        enqueue_qtds(hcd, qh);
        }
}

#define PTD_STATE_QTD_DONE      1
#define PTD_STATE_QTD_RELOAD    2
#define PTD_STATE_URB_RETIRE    3

static int check_int_transfer(struct usb_hcd *hcd, struct ptd *ptd,
                                                                struct urb *urb)
{
        u32 dw4;
        int i;

        dw4 = TO_U32(ptd->dw4);
        dw4 >>= 8;

        /* FIXME: ISP1761 datasheet does not say what to do with these. Do we
           need to handle these errors? Is it done in hardware? */

        if (ptd->dw3 & DW3_HALT_BIT) {

                urb->status = -EPROTO; /* Default unknown error */

                for (i = 0; i < 8; i++) {
                        switch (dw4 & 0x7) {
                        case INT_UNDERRUN:
                                dev_dbg(hcd->self.controller, "%s: underrun "
                                                "during uFrame %d\n",
                                                __func__, i);
                                urb->status = -ECOMM; /* Could not write data */
                                break;
                        case INT_EXACT:
                                dev_dbg(hcd->self.controller, "%s: transaction "
                                                "error during uFrame %d\n",
                                                __func__, i);
                                urb->status = -EPROTO; /* timeout, bad CRC, PID
                                                          error etc. */
                                break;
                        case INT_BABBLE:
                                dev_dbg(hcd->self.controller, "%s: babble "
                                                "error during uFrame %d\n",
                                                __func__, i);
                                urb->status = -EOVERFLOW;
                                break;
                        }
                        dw4 >>= 3;
                }

                return PTD_STATE_URB_RETIRE;
        }

        return PTD_STATE_QTD_DONE;
}

static int check_atl_transfer(struct usb_hcd *hcd, struct ptd *ptd,
                                                                struct urb *urb)
{
        WARN_ON(!ptd);
        if (ptd->dw3 & DW3_HALT_BIT) {
                if (ptd->dw3 & DW3_BABBLE_BIT)
                        urb->status = -EOVERFLOW;
                else if (FROM_DW3_CERR(ptd->dw3))
                        urb->status = -EPIPE;  /* Stall */
                else
                        urb->status = -EPROTO; /* Unknown */
/*
                dev_dbg(hcd->self.controller, "%s: ptd error:\n"
                        "        dw0: %08x dw1: %08x dw2: %08x dw3: %08x\n"
                        "        dw4: %08x dw5: %08x dw6: %08x dw7: %08x\n",
                        __func__,
                        ptd->dw0, ptd->dw1, ptd->dw2, ptd->dw3,
                        ptd->dw4, ptd->dw5, ptd->dw6, ptd->dw7);
*/
                return PTD_STATE_URB_RETIRE;
        }

        if ((ptd->dw3 & DW3_ERROR_BIT) && (ptd->dw3 & DW3_ACTIVE_BIT)) {
                /* Transfer Error, *but* active and no HALT -> reload */
                dev_dbg(hcd->self.controller, "PID error; reloading ptd\n");
                return PTD_STATE_QTD_RELOAD;
        }

        if (!FROM_DW3_NAKCOUNT(ptd->dw3) && (ptd->dw3 & DW3_ACTIVE_BIT)) {
                /*
                 * NAKs are handled in HW by the chip. Usually if the
                 * device is not able to send data fast enough.
                 * This happens mostly on slower hardware.
                 */
                return PTD_STATE_QTD_RELOAD;
        }

        return PTD_STATE_QTD_DONE;
}

static void handle_done_ptds(struct usb_hcd *hcd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        struct ptd ptd;
        struct isp1760_qh *qh;
        int slot;
        int state;
        struct isp1760_slotinfo *slots;
        u32 ptd_offset;
        struct isp1760_qtd *qtd;
        int modified;
        int skip_map;

        skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP);
        priv->int_done_map &= ~skip_map;
        skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP);
        priv->atl_done_map &= ~skip_map;

        modified = priv->int_done_map || priv->atl_done_map;

        while (priv->int_done_map || priv->atl_done_map) {
                if (priv->int_done_map) {
                        /* INT ptd */
                        slot = __ffs(priv->int_done_map);
                        priv->int_done_map &= ~(1 << slot);
                        slots = priv->int_slots;
                        /* This should not trigger, and could be removed if
                           noone have any problems with it triggering: */
                        if (!slots[slot].qh) {
                                WARN_ON(1);
                                continue;
                        }
                        ptd_offset = INT_PTD_OFFSET;
                        ptd_read(hcd, INT_PTD_OFFSET, slot, &ptd);
                        state = check_int_transfer(hcd, &ptd,
                                                        slots[slot].qtd->urb);
                } else {
                        /* ATL ptd */
                        slot = __ffs(priv->atl_done_map);
                        priv->atl_done_map &= ~(1 << slot);
                        slots = priv->atl_slots;
                        /* This should not trigger, and could be removed if
                           noone have any problems with it triggering: */
                        if (!slots[slot].qh) {
                                WARN_ON(1);
                                continue;
                        }
                        ptd_offset = ATL_PTD_OFFSET;
                        ptd_read(hcd, ATL_PTD_OFFSET, slot, &ptd);
                        state = check_atl_transfer(hcd, &ptd,
                                                        slots[slot].qtd->urb);
                }

                qtd = slots[slot].qtd;
                slots[slot].qtd = NULL;
                qh = slots[slot].qh;
                slots[slot].qh = NULL;
                qh->slot = -1;

                WARN_ON(qtd->status != QTD_XFER_STARTED);

                switch (state) {
                case PTD_STATE_QTD_DONE:
                        if ((usb_pipeint(qtd->urb->pipe)) &&
                                       (qtd->urb->dev->speed != USB_SPEED_HIGH))
                                qtd->actual_length =
                                       FROM_DW3_SCS_NRBYTESTRANSFERRED(ptd.dw3);
                        else
                                qtd->actual_length =
                                        FROM_DW3_NRBYTESTRANSFERRED(ptd.dw3);

                        qtd->status = QTD_XFER_COMPLETE;
                        if (list_is_last(&qtd->qtd_list, &qh->qtd_list) ||
                            is_short_bulk(qtd))
                                qtd = NULL;
                        else
                                qtd = list_entry(qtd->qtd_list.next,
                                                        typeof(*qtd), qtd_list);

                        qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3);
                        qh->ping = FROM_DW3_PING(ptd.dw3);
                        break;

                case PTD_STATE_QTD_RELOAD: /* QTD_RETRY, for atls only */
                        qtd->status = QTD_PAYLOAD_ALLOC;
                        ptd.dw0 |= DW0_VALID_BIT;
                        /* RL counter = ERR counter */
                        ptd.dw3 &= ~TO_DW3_NAKCOUNT(0xf);
                        ptd.dw3 |= TO_DW3_NAKCOUNT(FROM_DW2_RL(ptd.dw2));
                        ptd.dw3 &= ~TO_DW3_CERR(3);
                        ptd.dw3 |= TO_DW3_CERR(ERR_COUNTER);
                        qh->toggle = FROM_DW3_DATA_TOGGLE(ptd.dw3);
                        qh->ping = FROM_DW3_PING(ptd.dw3);
                        break;

                case PTD_STATE_URB_RETIRE:
                        qtd->status = QTD_RETIRE;
                        if ((qtd->urb->dev->speed != USB_SPEED_HIGH) &&
                                        (qtd->urb->status != -EPIPE) &&
                                        (qtd->urb->status != -EREMOTEIO)) {
                                qh->tt_buffer_dirty = 1;
                                if (usb_hub_clear_tt_buffer(qtd->urb))
                                        /* Clear failed; let's hope things work
                                           anyway */
                                        qh->tt_buffer_dirty = 0;
                        }
                        qtd = NULL;
                        qh->toggle = 0;
                        qh->ping = 0;
                        break;

                default:
                        WARN_ON(1);
                        continue;
                }

                if (qtd && (qtd->status == QTD_PAYLOAD_ALLOC)) {
                        if (slots == priv->int_slots) {
                                if (state == PTD_STATE_QTD_RELOAD)
                                        dev_err(hcd->self.controller,
                                                "%s: PTD_STATE_QTD_RELOAD on "
                                                "interrupt packet\n", __func__);
                                if (state != PTD_STATE_QTD_RELOAD)
                                        create_ptd_int(qh, qtd, &ptd);
                        } else {
                                if (state != PTD_STATE_QTD_RELOAD)
                                        create_ptd_atl(qh, qtd, &ptd);
                        }

                        start_bus_transfer(hcd, ptd_offset, slot, slots, qtd,
                                qh, &ptd);
                }
        }

        if (modified)
                schedule_ptds(hcd);
}

static irqreturn_t isp1760_irq(struct usb_hcd *hcd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        irqreturn_t irqret = IRQ_NONE;
        u32 int_reg;
        u32 imask;

        spin_lock(&priv->lock);

        if (!(hcd->state & HC_STATE_RUNNING))
                goto leave;

        imask = isp1760_hcd_read(hcd, HC_INTERRUPT);
        if (unlikely(!imask))
                goto leave;

        int_reg = priv->is_isp1763 ? ISP1763_HC_INTERRUPT :
                ISP176x_HC_INTERRUPT;
        isp1760_reg_write(priv->regs, int_reg, imask);

        priv->int_done_map |= isp1760_hcd_read(hcd, HC_INT_PTD_DONEMAP);
        priv->atl_done_map |= isp1760_hcd_read(hcd, HC_ATL_PTD_DONEMAP);

        handle_done_ptds(hcd);

        irqret = IRQ_HANDLED;

leave:
        spin_unlock(&priv->lock);

        return irqret;
}

/*
 * Workaround for problem described in chip errata 2:
 *
 * Sometimes interrupts are not generated when ATL (not INT?) completion occurs.
 * One solution suggested in the errata is to use SOF interrupts _instead_of_
 * ATL done interrupts (the "instead of" might be important since it seems
 * enabling ATL interrupts also causes the chip to sometimes - rarely - "forget"
 * to set the PTD's done bit in addition to not generating an interrupt!).
 *
 * So if we use SOF + ATL interrupts, we sometimes get stale PTDs since their
 * done bit is not being set. This is bad - it blocks the endpoint until reboot.
 *
 * If we use SOF interrupts only, we get latency between ptd completion and the
 * actual handling. This is very noticeable in testusb runs which takes several
 * minutes longer without ATL interrupts.
 *
 * A better solution is to run the code below every SLOT_CHECK_PERIOD ms. If it
 * finds active ATL slots which are older than SLOT_TIMEOUT ms, it checks the
 * slot's ACTIVE and VALID bits. If these are not set, the ptd is considered
 * completed and its done map bit is set.
 *
 * The values of SLOT_TIMEOUT and SLOT_CHECK_PERIOD have been arbitrarily chosen
 * not to cause too much lag when this HW bug occurs, while still hopefully
 * ensuring that the check does not falsely trigger.
 */
#define SLOT_TIMEOUT 300
#define SLOT_CHECK_PERIOD 200
static struct timer_list errata2_timer;
static struct usb_hcd *errata2_timer_hcd;

static void errata2_function(struct timer_list *unused)
{
        struct usb_hcd *hcd = errata2_timer_hcd;
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        const struct isp1760_memory_layout *mem = priv->memory_layout;
        int slot;
        struct ptd ptd;
        unsigned long spinflags;

        spin_lock_irqsave(&priv->lock, spinflags);

        for (slot = 0; slot < mem->slot_num; slot++)
                if (priv->atl_slots[slot].qh && time_after(jiffies,
                                        priv->atl_slots[slot].timestamp +
                                        msecs_to_jiffies(SLOT_TIMEOUT))) {
                        ptd_read(hcd, ATL_PTD_OFFSET, slot, &ptd);
                        if (!FROM_DW0_VALID(ptd.dw0) &&
                                        !FROM_DW3_ACTIVE(ptd.dw3))
                                priv->atl_done_map |= 1 << slot;
                }

        if (priv->atl_done_map)
                handle_done_ptds(hcd);

        spin_unlock_irqrestore(&priv->lock, spinflags);

        errata2_timer.expires = jiffies + msecs_to_jiffies(SLOT_CHECK_PERIOD);
        add_timer(&errata2_timer);
}

static int isp1763_run(struct usb_hcd *hcd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        int retval;
        u32 chipid_h;
        u32 chipid_l;
        u32 chip_rev;
        u32 ptd_atl_int;
        u32 ptd_iso;

        hcd->uses_new_polling = 1;
        hcd->state = HC_STATE_RUNNING;

        chipid_h = isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH);
        chipid_l = isp1760_hcd_read(hcd, HC_CHIP_ID_LOW);
        chip_rev = isp1760_hcd_read(hcd, HC_CHIP_REV);
        dev_info(hcd->self.controller, "USB ISP %02x%02x HW rev. %d started\n",
                 chipid_h, chipid_l, chip_rev);

        isp1760_hcd_clear(hcd, ISO_BUF_FILL);
        isp1760_hcd_clear(hcd, INT_BUF_FILL);
        isp1760_hcd_clear(hcd, ATL_BUF_FILL);

        isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP);
        isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP);
        isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP);
        ndelay(100);
        isp1760_hcd_clear(hcd, HC_ATL_PTD_DONEMAP);
        isp1760_hcd_clear(hcd, HC_INT_PTD_DONEMAP);
        isp1760_hcd_clear(hcd, HC_ISO_PTD_DONEMAP);

        isp1760_hcd_set(hcd, HW_OTG_DISABLE);
        isp1760_reg_write(priv->regs, ISP1763_HC_OTG_CTRL_CLEAR, BIT(7));
        isp1760_reg_write(priv->regs, ISP1763_HC_OTG_CTRL_CLEAR, BIT(15));
        mdelay(10);

        isp1760_hcd_set(hcd, HC_INT_IRQ_ENABLE);
        isp1760_hcd_set(hcd, HC_ATL_IRQ_ENABLE);

        isp1760_hcd_set(hcd, HW_GLOBAL_INTR_EN);

        isp1760_hcd_clear(hcd, HC_ATL_IRQ_MASK_AND);
        isp1760_hcd_clear(hcd, HC_INT_IRQ_MASK_AND);
        isp1760_hcd_clear(hcd, HC_ISO_IRQ_MASK_AND);

        isp1760_hcd_set(hcd, HC_ATL_IRQ_MASK_OR);
        isp1760_hcd_set(hcd, HC_INT_IRQ_MASK_OR);
        isp1760_hcd_set(hcd, HC_ISO_IRQ_MASK_OR);

        ptd_atl_int = 0x8000;
        ptd_iso = 0x0001;

        isp1760_hcd_write(hcd, HC_ATL_PTD_LASTPTD, ptd_atl_int);
        isp1760_hcd_write(hcd, HC_INT_PTD_LASTPTD, ptd_atl_int);
        isp1760_hcd_write(hcd, HC_ISO_PTD_LASTPTD, ptd_iso);

        isp1760_hcd_set(hcd, ATL_BUF_FILL);
        isp1760_hcd_set(hcd, INT_BUF_FILL);

        isp1760_hcd_clear(hcd, CMD_LRESET);
        isp1760_hcd_clear(hcd, CMD_RESET);

        retval = isp1760_hcd_set_and_wait(hcd, CMD_RUN, 250 * 1000);
        if (retval)
                return retval;

        down_write(&ehci_cf_port_reset_rwsem);
        retval = isp1760_hcd_set_and_wait(hcd, FLAG_CF, 250 * 1000);
        up_write(&ehci_cf_port_reset_rwsem);
        if (retval)
                return retval;

        return 0;
}

static int isp1760_run(struct usb_hcd *hcd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        int retval;
        u32 chipid_h;
        u32 chipid_l;
        u32 chip_rev;
        u32 ptd_atl_int;
        u32 ptd_iso;

        /*
         * ISP1763 have some differences in the setup and order to enable
         * the ports, disable otg, setup buffers, and ATL, INT, ISO status.
         * So, just handle it a separate sequence.
         */
        if (priv->is_isp1763)
                return isp1763_run(hcd);

        hcd->uses_new_polling = 1;

        hcd->state = HC_STATE_RUNNING;

        /* Set PTD interrupt AND & OR maps */
        isp1760_hcd_clear(hcd, HC_ATL_IRQ_MASK_AND);
        isp1760_hcd_clear(hcd, HC_INT_IRQ_MASK_AND);
        isp1760_hcd_clear(hcd, HC_ISO_IRQ_MASK_AND);

        isp1760_hcd_set(hcd, HC_ATL_IRQ_MASK_OR);
        isp1760_hcd_set(hcd, HC_INT_IRQ_MASK_OR);
        isp1760_hcd_set(hcd, HC_ISO_IRQ_MASK_OR);

        /* step 23 passed */

        isp1760_hcd_set(hcd, HW_GLOBAL_INTR_EN);

        isp1760_hcd_clear(hcd, CMD_LRESET);
        isp1760_hcd_clear(hcd, CMD_RESET);

        retval = isp1760_hcd_set_and_wait(hcd, CMD_RUN, 250 * 1000);
        if (retval)
                return retval;

        /*
         * XXX
         * Spec says to write FLAG_CF as last config action, priv code grabs
         * the semaphore while doing so.
         */
        down_write(&ehci_cf_port_reset_rwsem);

        retval = isp1760_hcd_set_and_wait(hcd, FLAG_CF, 250 * 1000);
        up_write(&ehci_cf_port_reset_rwsem);
        if (retval)
                return retval;

        errata2_timer_hcd = hcd;
        timer_setup(&errata2_timer, errata2_function, 0);
        errata2_timer.expires = jiffies + msecs_to_jiffies(SLOT_CHECK_PERIOD);
        add_timer(&errata2_timer);

        chipid_h = isp1760_hcd_read(hcd, HC_CHIP_ID_HIGH);
        chipid_l = isp1760_hcd_read(hcd, HC_CHIP_ID_LOW);
        chip_rev = isp1760_hcd_read(hcd, HC_CHIP_REV);
        dev_info(hcd->self.controller, "USB ISP %02x%02x HW rev. %d started\n",
                 chipid_h, chipid_l, chip_rev);

        /* PTD Register Init Part 2, Step 28 */

        /* Setup registers controlling PTD checking */
        ptd_atl_int = 0x80000000;
        ptd_iso = 0x00000001;

        isp1760_hcd_write(hcd, HC_ATL_PTD_LASTPTD, ptd_atl_int);
        isp1760_hcd_write(hcd, HC_INT_PTD_LASTPTD, ptd_atl_int);
        isp1760_hcd_write(hcd, HC_ISO_PTD_LASTPTD, ptd_iso);

        isp1760_hcd_set(hcd, HC_ATL_PTD_SKIPMAP);
        isp1760_hcd_set(hcd, HC_INT_PTD_SKIPMAP);
        isp1760_hcd_set(hcd, HC_ISO_PTD_SKIPMAP);

        isp1760_hcd_set(hcd, ATL_BUF_FILL);
        isp1760_hcd_set(hcd, INT_BUF_FILL);

        /* GRR this is run-once init(), being done every time the HC starts.
         * So long as they're part of class devices, we can't do it init()
         * since the class device isn't created that early.
         */
        return 0;
}

static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len)
{
        qtd->data_buffer = databuffer;

        qtd->length = len;

        return qtd->length;
}

static void qtd_list_free(struct list_head *qtd_list)
{
        struct isp1760_qtd *qtd, *qtd_next;

        list_for_each_entry_safe(qtd, qtd_next, qtd_list, qtd_list) {
                list_del(&qtd->qtd_list);
                qtd_free(qtd);
        }
}

/*
 * Packetize urb->transfer_buffer into list of packets of size wMaxPacketSize.
 * Also calculate the PID type (SETUP/IN/OUT) for each packet.
 */
static void packetize_urb(struct usb_hcd *hcd,
                struct urb *urb, struct list_head *head, gfp_t flags)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        const struct isp1760_memory_layout *mem = priv->memory_layout;
        struct isp1760_qtd *qtd;
        void *buf;
        int len, maxpacketsize;
        u8 packet_type;

        /*
         * URBs map to sequences of QTDs:  one logical transaction
         */

        if (!urb->transfer_buffer && urb->transfer_buffer_length) {
                /* XXX This looks like usb storage / SCSI bug */
                dev_err(hcd->self.controller,
                                "buf is null, dma is %08lx len is %d\n",
                                (long unsigned)urb->transfer_dma,
                                urb->transfer_buffer_length);
                WARN_ON(1);
        }

        if (usb_pipein(urb->pipe))
                packet_type = IN_PID;
        else
                packet_type = OUT_PID;

        if (usb_pipecontrol(urb->pipe)) {
                qtd = qtd_alloc(flags, urb, SETUP_PID);
                if (!qtd)
                        goto cleanup;
                qtd_fill(qtd, urb->setup_packet, sizeof(struct usb_ctrlrequest));
                list_add_tail(&qtd->qtd_list, head);

                /* for zero length DATA stages, STATUS is always IN */
                if (urb->transfer_buffer_length == 0)
                        packet_type = IN_PID;
        }

        maxpacketsize = usb_maxpacket(urb->dev, urb->pipe);

        /*
         * buffer gets wrapped in one or more qtds;
         * last one may be "short" (including zero len)
         * and may serve as a control status ack
         */
        buf = urb->transfer_buffer;
        len = urb->transfer_buffer_length;

        for (;;) {
                int this_qtd_len;

                qtd = qtd_alloc(flags, urb, packet_type);
                if (!qtd)
                        goto cleanup;

                if (len > mem->blocks_size[ISP176x_BLOCK_NUM - 1])
                        this_qtd_len = mem->blocks_size[ISP176x_BLOCK_NUM - 1];
                else
                        this_qtd_len = len;

                this_qtd_len = qtd_fill(qtd, buf, this_qtd_len);
                list_add_tail(&qtd->qtd_list, head);

                len -= this_qtd_len;
                buf += this_qtd_len;

                if (len <= 0)
                        break;
        }

        /*
         * control requests may need a terminating data "status" ack;
         * bulk ones may need a terminating short packet (zero length).
         */
        if (urb->transfer_buffer_length != 0) {
                int one_more = 0;

                if (usb_pipecontrol(urb->pipe)) {
                        one_more = 1;
                        if (packet_type == IN_PID)
                                packet_type = OUT_PID;
                        else
                                packet_type = IN_PID;
                } else if (usb_pipebulk(urb->pipe) && maxpacketsize
                                && (urb->transfer_flags & URB_ZERO_PACKET)
                                && !(urb->transfer_buffer_length %
                                                        maxpacketsize)) {
                        one_more = 1;
                }
                if (one_more) {
                        qtd = qtd_alloc(flags, urb, packet_type);
                        if (!qtd)
                                goto cleanup;

                        /* never any data in such packets */
                        qtd_fill(qtd, NULL, 0);
                        list_add_tail(&qtd->qtd_list, head);
                }
        }

        return;

cleanup:
        qtd_list_free(head);
}

static int isp1760_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
                gfp_t mem_flags)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        struct list_head *ep_queue;
        struct isp1760_qh *qh, *qhit;
        unsigned long spinflags;
        LIST_HEAD(new_qtds);
        int retval;
        int qh_in_queue;

        switch (usb_pipetype(urb->pipe)) {
        case PIPE_CONTROL:
                ep_queue = &priv->qh_list[QH_CONTROL];
                break;
        case PIPE_BULK:
                ep_queue = &priv->qh_list[QH_BULK];
                break;
        case PIPE_INTERRUPT:
                if (urb->interval < 0)
                        return -EINVAL;
                /* FIXME: Check bandwidth  */
                ep_queue = &priv->qh_list[QH_INTERRUPT];
                break;
        case PIPE_ISOCHRONOUS:
                dev_err(hcd->self.controller, "%s: isochronous USB packets "
                                                        "not yet supported\n",
                                                        __func__);
                return -EPIPE;
        default:
                dev_err(hcd->self.controller, "%s: unknown pipe type\n",
                                                        __func__);
                return -EPIPE;
        }

        if (usb_pipein(urb->pipe))
                urb->actual_length = 0;

        packetize_urb(hcd, urb, &new_qtds, mem_flags);
        if (list_empty(&new_qtds))
                return -ENOMEM;

        spin_lock_irqsave(&priv->lock, spinflags);

        if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
                retval = -ESHUTDOWN;
                qtd_list_free(&new_qtds);
                goto out;
        }
        retval = usb_hcd_link_urb_to_ep(hcd, urb);
        if (retval) {
                qtd_list_free(&new_qtds);
                goto out;
        }

        qh = urb->ep->hcpriv;
        if (qh) {
                qh_in_queue = 0;
                list_for_each_entry(qhit, ep_queue, qh_list) {
                        if (qhit == qh) {
                                qh_in_queue = 1;
                                break;
                        }
                }
                if (!qh_in_queue)
                        list_add_tail(&qh->qh_list, ep_queue);
        } else {
                qh = qh_alloc(GFP_ATOMIC);
                if (!qh) {
                        retval = -ENOMEM;
                        usb_hcd_unlink_urb_from_ep(hcd, urb);
                        qtd_list_free(&new_qtds);
                        goto out;
                }
                list_add_tail(&qh->qh_list, ep_queue);
                urb->ep->hcpriv = qh;
        }

        list_splice_tail(&new_qtds, &qh->qtd_list);
        schedule_ptds(hcd);

out:
        spin_unlock_irqrestore(&priv->lock, spinflags);
        return retval;
}

static void kill_transfer(struct usb_hcd *hcd, struct urb *urb,
                struct isp1760_qh *qh)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        int skip_map;

        WARN_ON(qh->slot == -1);

        /* We need to forcefully reclaim the slot since some transfers never
           return, e.g. interrupt transfers and NAKed bulk transfers. */
        if (usb_pipecontrol(urb->pipe) || usb_pipebulk(urb->pipe)) {
                if (qh->slot != -1) {
                        skip_map = isp1760_hcd_read(hcd, HC_ATL_PTD_SKIPMAP);
                        skip_map |= (1 << qh->slot);
                        isp1760_hcd_write(hcd, HC_ATL_PTD_SKIPMAP, skip_map);
                        ndelay(100);
                }
                priv->atl_slots[qh->slot].qh = NULL;
                priv->atl_slots[qh->slot].qtd = NULL;
        } else {
                if (qh->slot != -1) {
                        skip_map = isp1760_hcd_read(hcd, HC_INT_PTD_SKIPMAP);
                        skip_map |= (1 << qh->slot);
                        isp1760_hcd_write(hcd, HC_INT_PTD_SKIPMAP, skip_map);
                }
                priv->int_slots[qh->slot].qh = NULL;
                priv->int_slots[qh->slot].qtd = NULL;
        }

        qh->slot = -1;
}

/*
 * Retire the qtds beginning at 'qtd' and belonging all to the same urb, killing
 * any active transfer belonging to the urb in the process.
 */
static void dequeue_urb_from_qtd(struct usb_hcd *hcd, struct isp1760_qh *qh,
                                                struct isp1760_qtd *qtd)
{
        struct urb *urb;
        int urb_was_running;

        urb = qtd->urb;
        urb_was_running = 0;
        list_for_each_entry_from(qtd, &qh->qtd_list, qtd_list) {
                if (qtd->urb != urb)
                        break;

                if (qtd->status >= QTD_XFER_STARTED)
                        urb_was_running = 1;
                if (last_qtd_of_urb(qtd, qh) &&
                                        (qtd->status >= QTD_XFER_COMPLETE))
                        urb_was_running = 0;

                if (qtd->status == QTD_XFER_STARTED)
                        kill_transfer(hcd, urb, qh);
                qtd->status = QTD_RETIRE;
        }

        if ((urb->dev->speed != USB_SPEED_HIGH) && urb_was_running) {
                qh->tt_buffer_dirty = 1;
                if (usb_hub_clear_tt_buffer(urb))
                        /* Clear failed; let's hope things work anyway */
                        qh->tt_buffer_dirty = 0;
        }
}

static int isp1760_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
                int status)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        unsigned long spinflags;
        struct isp1760_qh *qh;
        struct isp1760_qtd *qtd;
        int retval = 0;

        spin_lock_irqsave(&priv->lock, spinflags);
        retval = usb_hcd_check_unlink_urb(hcd, urb, status);
        if (retval)
                goto out;

        qh = urb->ep->hcpriv;
        if (!qh) {
                retval = -EINVAL;
                goto out;
        }

        list_for_each_entry(qtd, &qh->qtd_list, qtd_list)
                if (qtd->urb == urb) {
                        dequeue_urb_from_qtd(hcd, qh, qtd);
                        list_move(&qtd->qtd_list, &qh->qtd_list);
                        break;
                }

        urb->status = status;
        schedule_ptds(hcd);

out:
        spin_unlock_irqrestore(&priv->lock, spinflags);
        return retval;
}

static void isp1760_endpoint_disable(struct usb_hcd *hcd,
                struct usb_host_endpoint *ep)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        unsigned long spinflags;
        struct isp1760_qh *qh, *qh_iter;
        int i;

        spin_lock_irqsave(&priv->lock, spinflags);

        qh = ep->hcpriv;
        if (!qh)
                goto out;

        WARN_ON(!list_empty(&qh->qtd_list));

        for (i = 0; i < QH_END; i++)
                list_for_each_entry(qh_iter, &priv->qh_list[i], qh_list)
                        if (qh_iter == qh) {
                                list_del(&qh_iter->qh_list);
                                i = QH_END;
                                break;
                        }
        qh_free(qh);
        ep->hcpriv = NULL;

        schedule_ptds(hcd);

out:
        spin_unlock_irqrestore(&priv->lock, spinflags);
}

static int isp1760_hub_status_data(struct usb_hcd *hcd, char *buf)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        u32 status = 0;
        int retval = 1;
        unsigned long flags;

        /* if !PM, root hub timers won't get shut down ... */
        if (!HC_IS_RUNNING(hcd->state))
                return 0;

        /* init status to no-changes */
        buf[0] = 0;

        spin_lock_irqsave(&priv->lock, flags);

        if (isp1760_hcd_is_set(hcd, PORT_OWNER) &&
            isp1760_hcd_is_set(hcd, PORT_CSC)) {
                isp1760_hcd_clear(hcd, PORT_CSC);
                goto done;
        }

        /*
         * Return status information even for ports with OWNER set.
         * Otherwise hub_wq wouldn't see the disconnect event when a
         * high-speed device is switched over to the companion
         * controller by the user.
         */
        if (isp1760_hcd_is_set(hcd, PORT_CSC) ||
            (isp1760_hcd_is_set(hcd, PORT_RESUME) &&
             time_after_eq(jiffies, priv->reset_done))) {
                buf [0] |= 1 << (0 + 1);
                status = STS_PCD;
        }
        /* FIXME autosuspend idle root hubs */
done:
        spin_unlock_irqrestore(&priv->lock, flags);
        return status ? retval : 0;
}

static void isp1760_hub_descriptor(struct isp1760_hcd *priv,
                struct usb_hub_descriptor *desc)
{
        int ports;
        u16 temp;

        ports = isp1760_hcd_n_ports(priv->hcd);

        desc->bDescriptorType = USB_DT_HUB;
        /* priv 1.0, 2.3.9 says 20ms max */
        desc->bPwrOn2PwrGood = 10;
        desc->bHubContrCurrent = 0;

        desc->bNbrPorts = ports;
        temp = 1 + (ports / 8);
        desc->bDescLength = 7 + 2 * temp;

        /* ports removable, and usb 1.0 legacy PortPwrCtrlMask */
        memset(&desc->u.hs.DeviceRemovable[0], 0, temp);
        memset(&desc->u.hs.DeviceRemovable[temp], 0xff, temp);

        /* per-port overcurrent reporting */
        temp = HUB_CHAR_INDV_PORT_OCPM;
        if (isp1760_hcd_ppc_is_set(priv->hcd))
                /* per-port power control */
                temp |= HUB_CHAR_INDV_PORT_LPSM;
        else
                /* no power switching */
                temp |= HUB_CHAR_NO_LPSM;
        desc->wHubCharacteristics = cpu_to_le16(temp);
}

#define PORT_WAKE_BITS  (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E)

static void check_reset_complete(struct usb_hcd *hcd, int index)
{
        if (!(isp1760_hcd_is_set(hcd, PORT_CONNECT)))
                return;

        /* if reset finished and it's still not enabled -- handoff */
        if (!isp1760_hcd_is_set(hcd, PORT_PE)) {
                dev_info(hcd->self.controller,
                         "port %d full speed --> companion\n", index + 1);

                isp1760_hcd_set(hcd, PORT_OWNER);

                isp1760_hcd_clear(hcd, PORT_CSC);
        } else {
                dev_info(hcd->self.controller, "port %d high speed\n",
                         index + 1);
        }

        return;
}

static int isp1760_hub_control(struct usb_hcd *hcd, u16 typeReq,
                u16 wValue, u16 wIndex, char *buf, u16 wLength)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        u32 status;
        unsigned long flags;
        int retval = 0;
        int ports;

        ports = isp1760_hcd_n_ports(hcd);

        /*
         * FIXME:  support SetPortFeatures USB_PORT_FEAT_INDICATOR.
         * HCS_INDICATOR may say we can change LEDs to off/amber/green.
         * (track current state ourselves) ... blink for diagnostics,
         * power, "this is the one", etc.  EHCI spec supports this.
         */

        spin_lock_irqsave(&priv->lock, flags);
        switch (typeReq) {
        case ClearHubFeature:
                switch (wValue) {
                case C_HUB_LOCAL_POWER:
                case C_HUB_OVER_CURRENT:
                        /* no hub-wide feature/status flags */
                        break;
                default:
                        goto error;
                }
                break;
        case ClearPortFeature:
                if (!wIndex || wIndex > ports)
                        goto error;
                wIndex--;

                /*
                 * Even if OWNER is set, so the port is owned by the
                 * companion controller, hub_wq needs to be able to clear
                 * the port-change status bits (especially
                 * USB_PORT_STAT_C_CONNECTION).
                 */

                switch (wValue) {
                case USB_PORT_FEAT_ENABLE:
                        isp1760_hcd_clear(hcd, PORT_PE);
                        break;
                case USB_PORT_FEAT_C_ENABLE:
                        /* XXX error? */
                        break;
                case USB_PORT_FEAT_SUSPEND:
                        if (isp1760_hcd_is_set(hcd, PORT_RESET))
                                goto error;

                        if (isp1760_hcd_is_set(hcd, PORT_SUSPEND)) {
                                if (!isp1760_hcd_is_set(hcd, PORT_PE))
                                        goto error;
                                /* resume signaling for 20 msec */
                                isp1760_hcd_clear(hcd, PORT_CSC);
                                isp1760_hcd_set(hcd, PORT_RESUME);

                                priv->reset_done = jiffies +
                                        msecs_to_jiffies(USB_RESUME_TIMEOUT);
                        }
                        break;
                case USB_PORT_FEAT_C_SUSPEND:
                        /* we auto-clear this feature */
                        break;
                case USB_PORT_FEAT_POWER:
                        if (isp1760_hcd_ppc_is_set(hcd))
                                isp1760_hcd_clear(hcd, PORT_POWER);
                        break;
                case USB_PORT_FEAT_C_CONNECTION:
                        isp1760_hcd_set(hcd, PORT_CSC);
                        break;
                case USB_PORT_FEAT_C_OVER_CURRENT:
                        /* XXX error ?*/
                        break;
                case USB_PORT_FEAT_C_RESET:
                        /* GetPortStatus clears reset */
                        break;
                default:
                        goto error;
                }
                isp1760_hcd_read(hcd, CMD_RUN);
                break;
        case GetHubDescriptor:
                isp1760_hub_descriptor(priv, (struct usb_hub_descriptor *)
                        buf);
                break;
        case GetHubStatus:
                /* no hub-wide feature/status flags */
                memset(buf, 0, 4);
                break;
        case GetPortStatus:
                if (!wIndex || wIndex > ports)
                        goto error;
                wIndex--;
                status = 0;

                /* wPortChange bits */
                if (isp1760_hcd_is_set(hcd, PORT_CSC))
                        status |= USB_PORT_STAT_C_CONNECTION << 16;

                /* whoever resumes must GetPortStatus to complete it!! */
                if (isp1760_hcd_is_set(hcd, PORT_RESUME)) {
                        dev_err(hcd->self.controller, "Port resume should be skipped.\n");

                        /* Remote Wakeup received? */
                        if (!priv->reset_done) {
                                /* resume signaling for 20 msec */
                                priv->reset_done = jiffies
                                                + msecs_to_jiffies(20);
                                /* check the port again */
                                mod_timer(&hcd->rh_timer, priv->reset_done);
                        }

                        /* resume completed? */
                        else if (time_after_eq(jiffies,
                                        priv->reset_done)) {
                                status |= USB_PORT_STAT_C_SUSPEND << 16;
                                priv->reset_done = 0;

                                /* stop resume signaling */
                                isp1760_hcd_clear(hcd, PORT_CSC);

                                retval = isp1760_hcd_clear_and_wait(hcd,
                                                          PORT_RESUME, 2000);
                                if (retval != 0) {
                                        dev_err(hcd->self.controller,
                                                "port %d resume error %d\n",
                                                wIndex + 1, retval);
                                        goto error;
                                }
                        }
                }

                /* whoever resets must GetPortStatus to complete it!! */
                if (isp1760_hcd_is_set(hcd, PORT_RESET) &&
                    time_after_eq(jiffies, priv->reset_done)) {
                        status |= USB_PORT_STAT_C_RESET << 16;
                        priv->reset_done = 0;

                        /* force reset to complete */
                        /* REVISIT:  some hardware needs 550+ usec to clear
                         * this bit; seems too long to spin routinely...
                         */
                        retval = isp1760_hcd_clear_and_wait(hcd, PORT_RESET,
                                                            750);
                        if (retval != 0) {
                                dev_err(hcd->self.controller, "port %d reset error %d\n",
                                        wIndex + 1, retval);
                                goto error;
                        }

                        /* see what we found out */
                        check_reset_complete(hcd, wIndex);
                }
                /*
                 * Even if OWNER is set, there's no harm letting hub_wq
                 * see the wPortStatus values (they should all be 0 except
                 * for PORT_POWER anyway).
                 */

                if (isp1760_hcd_is_set(hcd, PORT_OWNER))
                        dev_err(hcd->self.controller, "PORT_OWNER is set\n");

                if (isp1760_hcd_is_set(hcd, PORT_CONNECT)) {
                        status |= USB_PORT_STAT_CONNECTION;
                        /* status may be from integrated TT */
                        status |= USB_PORT_STAT_HIGH_SPEED;
                }
                if (isp1760_hcd_is_set(hcd, PORT_PE))
                        status |= USB_PORT_STAT_ENABLE;
                if (isp1760_hcd_is_set(hcd, PORT_SUSPEND) &&
                    isp1760_hcd_is_set(hcd, PORT_RESUME))
                        status |= USB_PORT_STAT_SUSPEND;
                if (isp1760_hcd_is_set(hcd, PORT_RESET))
                        status |= USB_PORT_STAT_RESET;
                if (isp1760_hcd_is_set(hcd, PORT_POWER))
                        status |= USB_PORT_STAT_POWER;

                put_unaligned(cpu_to_le32(status), (__le32 *) buf);
                break;
        case SetHubFeature:
                switch (wValue) {
                case C_HUB_LOCAL_POWER:
                case C_HUB_OVER_CURRENT:
                        /* no hub-wide feature/status flags */
                        break;
                default:
                        goto error;
                }
                break;
        case SetPortFeature:
                wIndex &= 0xff;
                if (!wIndex || wIndex > ports)
                        goto error;
                wIndex--;

                if (isp1760_hcd_is_set(hcd, PORT_OWNER))
                        break;

                switch (wValue) {
                case USB_PORT_FEAT_ENABLE:
                        isp1760_hcd_set(hcd, PORT_PE);
                        break;

                case USB_PORT_FEAT_SUSPEND:
                        if (!isp1760_hcd_is_set(hcd, PORT_PE) ||
                            isp1760_hcd_is_set(hcd, PORT_RESET))
                                goto error;

                        isp1760_hcd_set(hcd, PORT_SUSPEND);
                        break;
                case USB_PORT_FEAT_POWER:
                        if (isp1760_hcd_ppc_is_set(hcd))
                                isp1760_hcd_set(hcd, PORT_POWER);
                        break;
                case USB_PORT_FEAT_RESET:
                        if (isp1760_hcd_is_set(hcd, PORT_RESUME))
                                goto error;
                        /* line status bits may report this as low speed,
                         * which can be fine if this root hub has a
                         * transaction translator built in.
                         */
                        if ((isp1760_hcd_is_set(hcd, PORT_CONNECT) &&
                             !isp1760_hcd_is_set(hcd, PORT_PE)) &&
                            (isp1760_hcd_read(hcd, PORT_LSTATUS) == 1)) {
                                isp1760_hcd_set(hcd, PORT_OWNER);
                        } else {
                                isp1760_hcd_set(hcd, PORT_RESET);
                                isp1760_hcd_clear(hcd, PORT_PE);

                                /*
                                 * caller must wait, then call GetPortStatus
                                 * usb 2.0 spec says 50 ms resets on root
                                 */
                                priv->reset_done = jiffies +
                                        msecs_to_jiffies(50);
                        }
                        break;
                default:
                        goto error;
                }
                break;

        default:
error:
                /* "stall" on error */
                retval = -EPIPE;
        }
        spin_unlock_irqrestore(&priv->lock, flags);
        return retval;
}

static int isp1760_get_frame(struct usb_hcd *hcd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        u32 fr;

        fr = isp1760_hcd_read(hcd, HC_FRINDEX);
        return (fr >> 3) % priv->periodic_size;
}

static void isp1760_stop(struct usb_hcd *hcd)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);

        timer_delete(&errata2_timer);

        isp1760_hub_control(hcd, ClearPortFeature, USB_PORT_FEAT_POWER, 1,
                        NULL, 0);
        msleep(20);

        spin_lock_irq(&priv->lock);
        ehci_reset(hcd);
        /* Disable IRQ */
        isp1760_hcd_clear(hcd, HW_GLOBAL_INTR_EN);
        spin_unlock_irq(&priv->lock);

        isp1760_hcd_clear(hcd, FLAG_CF);
}

static void isp1760_shutdown(struct usb_hcd *hcd)
{
        isp1760_stop(hcd);

        isp1760_hcd_clear(hcd, HW_GLOBAL_INTR_EN);

        isp1760_hcd_clear(hcd, CMD_RUN);
}

static void isp1760_clear_tt_buffer_complete(struct usb_hcd *hcd,
                                                struct usb_host_endpoint *ep)
{
        struct isp1760_hcd *priv = hcd_to_priv(hcd);
        struct isp1760_qh *qh = ep->hcpriv;
        unsigned long spinflags;

        if (!qh)
                return;

        spin_lock_irqsave(&priv->lock, spinflags);
        qh->tt_buffer_dirty = 0;
        schedule_ptds(hcd);
        spin_unlock_irqrestore(&priv->lock, spinflags);
}


static const struct hc_driver isp1760_hc_driver = {
        .description            = "isp1760-hcd",
        .product_desc           = "NXP ISP1760 USB Host Controller",
        .hcd_priv_size          = sizeof(struct isp1760_hcd *),
        .irq                    = isp1760_irq,
        .flags                  = HCD_MEMORY | HCD_USB2,
        .reset                  = isp1760_hc_setup,
        .start                  = isp1760_run,
        .stop                   = isp1760_stop,
        .shutdown               = isp1760_shutdown,
        .urb_enqueue            = isp1760_urb_enqueue,
        .urb_dequeue            = isp1760_urb_dequeue,
        .endpoint_disable       = isp1760_endpoint_disable,
        .get_frame_number       = isp1760_get_frame,
        .hub_status_data        = isp1760_hub_status_data,
        .hub_control            = isp1760_hub_control,
        .clear_tt_buffer_complete       = isp1760_clear_tt_buffer_complete,
};

int __init isp1760_init_kmem_once(void)
{
        urb_listitem_cachep = kmem_cache_create("isp1760_urb_listitem",
                        sizeof(struct urb_listitem), 0, SLAB_TEMPORARY, NULL);

        if (!urb_listitem_cachep)
                return -ENOMEM;

        qtd_cachep = kmem_cache_create("isp1760_qtd",
                        sizeof(struct isp1760_qtd), 0, SLAB_TEMPORARY, NULL);

        if (!qtd_cachep)
                goto destroy_urb_listitem;

        qh_cachep = kmem_cache_create("isp1760_qh", sizeof(struct isp1760_qh),
                        0, SLAB_TEMPORARY, NULL);

        if (!qh_cachep)
                goto destroy_qtd;

        return 0;

destroy_qtd:
        kmem_cache_destroy(qtd_cachep);

destroy_urb_listitem:
        kmem_cache_destroy(urb_listitem_cachep);

        return -ENOMEM;
}

void isp1760_deinit_kmem_cache(void)
{
        kmem_cache_destroy(qtd_cachep);
        kmem_cache_destroy(qh_cachep);
        kmem_cache_destroy(urb_listitem_cachep);
}

int isp1760_hcd_register(struct isp1760_hcd *priv, struct resource *mem,
                         int irq, unsigned long irqflags,
                         struct device *dev)
{
        const struct isp1760_memory_layout *mem_layout = priv->memory_layout;
        struct usb_hcd *hcd;
        int ret;

        hcd = usb_create_hcd(&isp1760_hc_driver, dev, dev_name(dev));
        if (!hcd)
                return -ENOMEM;

        *(struct isp1760_hcd **)hcd->hcd_priv = priv;

        priv->hcd = hcd;

        priv->atl_slots = kzalloc_objs(struct isp1760_slotinfo,
                                       mem_layout->slot_num);
        if (!priv->atl_slots) {
                ret = -ENOMEM;
                goto put_hcd;
        }

        priv->int_slots = kzalloc_objs(struct isp1760_slotinfo,
                                       mem_layout->slot_num);
        if (!priv->int_slots) {
                ret = -ENOMEM;
                goto free_atl_slots;
        }

        init_memory(priv);

        hcd->irq = irq;
        hcd->rsrc_start = mem->start;
        hcd->rsrc_len = resource_size(mem);

        /* This driver doesn't support wakeup requests */
        hcd->cant_recv_wakeups = 1;

        ret = usb_add_hcd(hcd, irq, irqflags);
        if (ret)
                goto free_int_slots;

        device_wakeup_enable(hcd->self.controller);

        return 0;

free_int_slots:
        kfree(priv->int_slots);
free_atl_slots:
        kfree(priv->atl_slots);
put_hcd:
        usb_put_hcd(hcd);
        return ret;
}

void isp1760_hcd_unregister(struct isp1760_hcd *priv)
{
        if (!priv->hcd)
                return;

        usb_remove_hcd(priv->hcd);
        usb_put_hcd(priv->hcd);
        kfree(priv->atl_slots);
        kfree(priv->int_slots);
}