root/drivers/net/wireless/atmel/at76c50x-usb.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * at76c503/at76c505 USB driver
 *
 * Copyright (c) 2002 - 2003 Oliver Kurth
 * Copyright (c) 2004 Joerg Albert <joerg.albert@gmx.de>
 * Copyright (c) 2004 Nick Jones
 * Copyright (c) 2004 Balint Seeber <n0_5p4m_p13453@hotmail.com>
 * Copyright (c) 2007 Guido Guenther <agx@sigxcpu.org>
 * Copyright (c) 2007 Kalle Valo <kalle.valo@iki.fi>
 * Copyright (c) 2010 Sebastian Smolorz <sesmo@gmx.net>
 *
 * This file is part of the Berlios driver for USB WLAN devices based on the
 * Atmel AT76C503A/505/505A.
 *
 * Some iw_handler code was taken from airo.c, (C) 1999 Benjamin Reed
 *
 * TODO list is at the wiki:
 *
 * https://wireless.wiki.kernel.org/en/users/Drivers/at76c50x-usb#TODO
 */

#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/spinlock.h>
#include <linux/list.h>
#include <linux/usb.h>
#include <linux/netdevice.h>
#include <linux/if_arp.h>
#include <linux/etherdevice.h>
#include <linux/ethtool.h>
#include <linux/wireless.h>
#include <net/iw_handler.h>
#include <net/ieee80211_radiotap.h>
#include <linux/firmware.h>
#include <linux/leds.h>
#include <net/mac80211.h>

#include "at76c50x-usb.h"

/* Version information */
#define DRIVER_NAME "at76c50x-usb"
#define DRIVER_VERSION  "0.17"
#define DRIVER_DESC "Atmel at76x USB Wireless LAN Driver"

/* at76_debug bits */
#define DBG_PROGRESS            0x00000001      /* authentication/accociation */
#define DBG_BSS_TABLE           0x00000002      /* show BSS table after scans */
#define DBG_IOCTL               0x00000004      /* ioctl calls / settings */
#define DBG_MAC_STATE           0x00000008      /* MAC state transitions */
#define DBG_TX_DATA             0x00000010      /* tx header */
#define DBG_TX_DATA_CONTENT     0x00000020      /* tx content */
#define DBG_TX_MGMT             0x00000040      /* tx management */
#define DBG_RX_DATA             0x00000080      /* rx data header */
#define DBG_RX_DATA_CONTENT     0x00000100      /* rx data content */
#define DBG_RX_MGMT             0x00000200      /* rx mgmt frame headers */
#define DBG_RX_BEACON           0x00000400      /* rx beacon */
#define DBG_RX_CTRL             0x00000800      /* rx control */
#define DBG_RX_MGMT_CONTENT     0x00001000      /* rx mgmt content */
#define DBG_RX_FRAGS            0x00002000      /* rx data fragment handling */
#define DBG_DEVSTART            0x00004000      /* fw download, device start */
#define DBG_URB                 0x00008000      /* rx urb status, ... */
#define DBG_RX_ATMEL_HDR        0x00010000      /* Atmel-specific Rx headers */
#define DBG_PROC_ENTRY          0x00020000      /* procedure entries/exits */
#define DBG_PM                  0x00040000      /* power management settings */
#define DBG_BSS_MATCH           0x00080000      /* BSS match failures */
#define DBG_PARAMS              0x00100000      /* show configured parameters */
#define DBG_WAIT_COMPLETE       0x00200000      /* command completion */
#define DBG_RX_FRAGS_SKB        0x00400000      /* skb header of Rx fragments */
#define DBG_BSS_TABLE_RM        0x00800000      /* purging bss table entries */
#define DBG_MONITOR_MODE        0x01000000      /* monitor mode */
#define DBG_MIB                 0x02000000      /* dump all MIBs on startup */
#define DBG_MGMT_TIMER          0x04000000      /* dump mgmt_timer ops */
#define DBG_WE_EVENTS           0x08000000      /* dump wireless events */
#define DBG_FW                  0x10000000      /* firmware download */
#define DBG_DFU                 0x20000000      /* device firmware upgrade */
#define DBG_CMD                 0x40000000
#define DBG_MAC80211            0x80000000

#define DBG_DEFAULTS            0

/* Use our own dbg macro */
#define at76_dbg(bits, format, arg...)                                  \
do {                                                                    \
        if (at76_debug & (bits))                                        \
                printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \
} while (0)

#define at76_dbg_dump(bits, buf, len, format, arg...)                   \
do {                                                                    \
        if (at76_debug & (bits)) {                                      \
                printk(KERN_DEBUG DRIVER_NAME ": " format "\n", ##arg); \
                print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buf, len); \
        }                                                               \
} while (0)

static uint at76_debug = DBG_DEFAULTS;

/* Protect against concurrent firmware loading and parsing */
static DEFINE_MUTEX(fw_mutex);

static struct fwentry firmwares[] = {
        [0] = { "" },
        [BOARD_503_ISL3861] = { "atmel_at76c503-i3861.bin" },
        [BOARD_503_ISL3863] = { "atmel_at76c503-i3863.bin" },
        [BOARD_503] = { "atmel_at76c503-rfmd.bin" },
        [BOARD_503_ACC] = { "atmel_at76c503-rfmd-acc.bin" },
        [BOARD_505] = { "atmel_at76c505-rfmd.bin" },
        [BOARD_505_2958] = { "atmel_at76c505-rfmd2958.bin" },
        [BOARD_505A] = { "atmel_at76c505a-rfmd2958.bin" },
        [BOARD_505AMX] = { "atmel_at76c505amx-rfmd.bin" },
};
MODULE_FIRMWARE("atmel_at76c503-i3861.bin");
MODULE_FIRMWARE("atmel_at76c503-i3863.bin");
MODULE_FIRMWARE("atmel_at76c503-rfmd.bin");
MODULE_FIRMWARE("atmel_at76c503-rfmd-acc.bin");
MODULE_FIRMWARE("atmel_at76c505-rfmd.bin");
MODULE_FIRMWARE("atmel_at76c505-rfmd2958.bin");
MODULE_FIRMWARE("atmel_at76c505a-rfmd2958.bin");
MODULE_FIRMWARE("atmel_at76c505amx-rfmd.bin");

#define USB_DEVICE_DATA(__ops)  .driver_info = (kernel_ulong_t)(__ops)

static const struct usb_device_id dev_table[] = {
        /*
         * at76c503-i3861
         */
        /* Generic AT76C503/3861 device */
        { USB_DEVICE(0x03eb, 0x7603), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /* Linksys WUSB11 v2.1/v2.6 */
        { USB_DEVICE(0x066b, 0x2211), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /* Netgear MA101 rev. A */
        { USB_DEVICE(0x0864, 0x4100), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /* Tekram U300C / Allnet ALL0193 */
        { USB_DEVICE(0x0b3b, 0x1612), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /* HP HN210W J7801A */
        { USB_DEVICE(0x03f0, 0x011c), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /* Sitecom/Z-Com/Zyxel M4Y-750 */
        { USB_DEVICE(0x0cde, 0x0001), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /* Dynalink/Askey WLL013 (intersil) */
        { USB_DEVICE(0x069a, 0x0320), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /* EZ connect 11Mpbs USB Wireless Adapter SMC2662W v1 */
        { USB_DEVICE(0x0d5c, 0xa001), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /* BenQ AWL300 */
        { USB_DEVICE(0x04a5, 0x9000), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /* Addtron AWU-120, Compex WLU11 */
        { USB_DEVICE(0x05dd, 0xff31), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /* Intel AP310 AnyPoint II USB */
        { USB_DEVICE(0x8086, 0x0200), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /* Dynalink L11U */
        { USB_DEVICE(0x0d8e, 0x7100), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /* Arescom WL-210, FCC id 07J-GL2411USB */
        { USB_DEVICE(0x0d8e, 0x7110), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /* I-O DATA WN-B11/USB */
        { USB_DEVICE(0x04bb, 0x0919), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /* BT Voyager 1010 */
        { USB_DEVICE(0x069a, 0x0821), USB_DEVICE_DATA(BOARD_503_ISL3861) },
        /*
         * at76c503-i3863
         */
        /* Generic AT76C503/3863 device */
        { USB_DEVICE(0x03eb, 0x7604), USB_DEVICE_DATA(BOARD_503_ISL3863) },
        /* Samsung SWL-2100U */
        { USB_DEVICE(0x055d, 0xa000), USB_DEVICE_DATA(BOARD_503_ISL3863) },
        /*
         * at76c503-rfmd
         */
        /* Generic AT76C503/RFMD device */
        { USB_DEVICE(0x03eb, 0x7605), USB_DEVICE_DATA(BOARD_503) },
        /* Dynalink/Askey WLL013 (rfmd) */
        { USB_DEVICE(0x069a, 0x0321), USB_DEVICE_DATA(BOARD_503) },
        /* Linksys WUSB11 v2.6 */
        { USB_DEVICE(0x077b, 0x2219), USB_DEVICE_DATA(BOARD_503) },
        /* Network Everywhere NWU11B */
        { USB_DEVICE(0x077b, 0x2227), USB_DEVICE_DATA(BOARD_503) },
        /* Netgear MA101 rev. B */
        { USB_DEVICE(0x0864, 0x4102), USB_DEVICE_DATA(BOARD_503) },
        /* D-Link DWL-120 rev. E */
        { USB_DEVICE(0x2001, 0x3200), USB_DEVICE_DATA(BOARD_503) },
        /* Actiontec 802UAT1, HWU01150-01UK */
        { USB_DEVICE(0x1668, 0x7605), USB_DEVICE_DATA(BOARD_503) },
        /* AirVast W-Buddie WN210 */
        { USB_DEVICE(0x03eb, 0x4102), USB_DEVICE_DATA(BOARD_503) },
        /* Dick Smith Electronics XH1153 802.11b USB adapter */
        { USB_DEVICE(0x1371, 0x5743), USB_DEVICE_DATA(BOARD_503) },
        /* CNet CNUSB611 */
        { USB_DEVICE(0x1371, 0x0001), USB_DEVICE_DATA(BOARD_503) },
        /* FiberLine FL-WL200U */
        { USB_DEVICE(0x1371, 0x0002), USB_DEVICE_DATA(BOARD_503) },
        /* BenQ AWL400 USB stick */
        { USB_DEVICE(0x04a5, 0x9001), USB_DEVICE_DATA(BOARD_503) },
        /* 3Com 3CRSHEW696 */
        { USB_DEVICE(0x0506, 0x0a01), USB_DEVICE_DATA(BOARD_503) },
        /* Siemens Santis ADSL USB WLAN adapter WLL 013 */
        { USB_DEVICE(0x0681, 0x001b), USB_DEVICE_DATA(BOARD_503) },
        /* Belkin F5D6050, version 2 */
        { USB_DEVICE(0x050d, 0x0050), USB_DEVICE_DATA(BOARD_503) },
        /* iBlitzz, BWU613 (not *B or *SB) */
        { USB_DEVICE(0x07b8, 0xb000), USB_DEVICE_DATA(BOARD_503) },
        /* Gigabyte GN-WLBM101 */
        { USB_DEVICE(0x1044, 0x8003), USB_DEVICE_DATA(BOARD_503) },
        /* Planex GW-US11S */
        { USB_DEVICE(0x2019, 0x3220), USB_DEVICE_DATA(BOARD_503) },
        /* Internal WLAN adapter in h5[4,5]xx series iPAQs */
        { USB_DEVICE(0x049f, 0x0032), USB_DEVICE_DATA(BOARD_503) },
        /* Corega Wireless LAN USB-11 mini */
        { USB_DEVICE(0x07aa, 0x0011), USB_DEVICE_DATA(BOARD_503) },
        /* Corega Wireless LAN USB-11 mini2 */
        { USB_DEVICE(0x07aa, 0x0018), USB_DEVICE_DATA(BOARD_503) },
        /* Uniden PCW100 */
        { USB_DEVICE(0x05dd, 0xff35), USB_DEVICE_DATA(BOARD_503) },
        /*
         * at76c503-rfmd-acc
         */
        /* SMC2664W */
        { USB_DEVICE(0x083a, 0x3501), USB_DEVICE_DATA(BOARD_503_ACC) },
        /* Belkin F5D6050, SMC2662W v2, SMC2662W-AR */
        { USB_DEVICE(0x0d5c, 0xa002), USB_DEVICE_DATA(BOARD_503_ACC) },
        /*
         * at76c505-rfmd
         */
        /* Generic AT76C505/RFMD */
        { USB_DEVICE(0x03eb, 0x7606), USB_DEVICE_DATA(BOARD_505) },
        /*
         * at76c505-rfmd2958
         */
        /* Generic AT76C505/RFMD, OvisLink WL-1130USB */
        { USB_DEVICE(0x03eb, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) },
        /* Fiberline FL-WL240U */
        { USB_DEVICE(0x1371, 0x0014), USB_DEVICE_DATA(BOARD_505_2958) },
        /* CNet CNUSB-611G */
        { USB_DEVICE(0x1371, 0x0013), USB_DEVICE_DATA(BOARD_505_2958) },
        /* Linksys WUSB11 v2.8 */
        { USB_DEVICE(0x1915, 0x2233), USB_DEVICE_DATA(BOARD_505_2958) },
        /* Xterasys XN-2122B, IBlitzz BWU613B/BWU613SB */
        { USB_DEVICE(0x12fd, 0x1001), USB_DEVICE_DATA(BOARD_505_2958) },
        /* Corega USB WLAN Stick 11 */
        { USB_DEVICE(0x07aa, 0x7613), USB_DEVICE_DATA(BOARD_505_2958) },
        /* Microstar MSI Box MS6978 */
        { USB_DEVICE(0x0db0, 0x1020), USB_DEVICE_DATA(BOARD_505_2958) },
        /*
         * at76c505a-rfmd2958
         */
        /* Generic AT76C505A device */
        { USB_DEVICE(0x03eb, 0x7614), USB_DEVICE_DATA(BOARD_505A) },
        /* Generic AT76C505AS device */
        { USB_DEVICE(0x03eb, 0x7617), USB_DEVICE_DATA(BOARD_505A) },
        /* Siemens Gigaset USB WLAN Adapter 11 */
        { USB_DEVICE(0x1690, 0x0701), USB_DEVICE_DATA(BOARD_505A) },
        /* OQO Model 01+ Internal Wi-Fi */
        { USB_DEVICE(0x1557, 0x0002), USB_DEVICE_DATA(BOARD_505A) },
        /*
         * at76c505amx-rfmd
         */
        /* Generic AT76C505AMX device */
        { USB_DEVICE(0x03eb, 0x7615), USB_DEVICE_DATA(BOARD_505AMX) },
        { }
};

MODULE_DEVICE_TABLE(usb, dev_table);

/* Supported rates of this hardware, bit 7 marks basic rates */
static const u8 hw_rates[] = { 0x82, 0x84, 0x0b, 0x16 };

static const char *const preambles[] = { "long", "short", "auto" };

/* Firmware download */
/* DFU states */
#define STATE_IDLE                      0x00
#define STATE_DETACH                    0x01
#define STATE_DFU_IDLE                  0x02
#define STATE_DFU_DOWNLOAD_SYNC         0x03
#define STATE_DFU_DOWNLOAD_BUSY         0x04
#define STATE_DFU_DOWNLOAD_IDLE         0x05
#define STATE_DFU_MANIFEST_SYNC         0x06
#define STATE_DFU_MANIFEST              0x07
#define STATE_DFU_MANIFEST_WAIT_RESET   0x08
#define STATE_DFU_UPLOAD_IDLE           0x09
#define STATE_DFU_ERROR                 0x0a

/* DFU commands */
#define DFU_DETACH                      0
#define DFU_DNLOAD                      1
#define DFU_UPLOAD                      2
#define DFU_GETSTATUS                   3
#define DFU_CLRSTATUS                   4
#define DFU_GETSTATE                    5
#define DFU_ABORT                       6

#define FW_BLOCK_SIZE 1024

struct dfu_status {
        unsigned char status;
        unsigned char poll_timeout[3];
        unsigned char state;
        unsigned char string;
} __packed;

static inline int at76_is_intersil(enum board_type board)
{
        return (board == BOARD_503_ISL3861 || board == BOARD_503_ISL3863);
}

static inline int at76_is_503rfmd(enum board_type board)
{
        return (board == BOARD_503 || board == BOARD_503_ACC);
}

static inline int at76_is_505a(enum board_type board)
{
        return (board == BOARD_505A || board == BOARD_505AMX);
}

/* Load a block of the first (internal) part of the firmware */
static int at76_load_int_fw_block(struct usb_device *udev, int blockno,
                                  void *block, int size)
{
        return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), DFU_DNLOAD,
                               USB_TYPE_CLASS | USB_DIR_OUT |
                               USB_RECIP_INTERFACE, blockno, 0, block, size,
                               USB_CTRL_GET_TIMEOUT);
}

static int at76_dfu_get_status(struct usb_device *udev,
                               struct dfu_status *status)
{
        int ret;

        ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATUS,
                              USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
                              0, 0, status, sizeof(*status),
                              USB_CTRL_GET_TIMEOUT);
        return ret;
}

static int at76_dfu_get_state(struct usb_device *udev, u8 *state)
{
        int ret;

        ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), DFU_GETSTATE,
                              USB_TYPE_CLASS | USB_DIR_IN | USB_RECIP_INTERFACE,
                              0, 0, state, 1, USB_CTRL_GET_TIMEOUT);
        return ret;
}

/* Convert timeout from the DFU status to jiffies */
static inline unsigned long at76_get_timeout(struct dfu_status *s)
{
        return msecs_to_jiffies((s->poll_timeout[2] << 16)
                                | (s->poll_timeout[1] << 8)
                                | (s->poll_timeout[0]));
}

/* Load internal firmware from the buffer.  If manifest_sync_timeout > 0, use
 * its value in jiffies in the MANIFEST_SYNC state.  */
static int at76_usbdfu_download(struct usb_device *udev, u8 *buf, u32 size,
                                int manifest_sync_timeout)
{
        int ret = 0;
        int need_dfu_state = 1;
        int is_done = 0;
        u32 dfu_timeout = 0;
        int bsize = 0;
        int blockno = 0;
        struct dfu_status *dfu_stat_buf;
        u8 *dfu_state = NULL;
        u8 *block = NULL;

        at76_dbg(DBG_DFU, "%s( %p, %u, %d)", __func__, buf, size,
                 manifest_sync_timeout);

        if (!size) {
                dev_err(&udev->dev, "FW buffer length invalid!\n");
                return -EINVAL;
        }

        dfu_stat_buf = kmalloc_obj(*dfu_stat_buf);
        if (!dfu_stat_buf) {
                ret = -ENOMEM;
                goto exit;
        }

        block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
        if (!block) {
                ret = -ENOMEM;
                goto exit;
        }

        dfu_state = kmalloc(sizeof(u8), GFP_KERNEL);
        if (!dfu_state) {
                ret = -ENOMEM;
                goto exit;
        }
        *dfu_state = 0;

        do {
                if (need_dfu_state) {
                        ret = at76_dfu_get_state(udev, dfu_state);
                        if (ret < 0) {
                                dev_err(&udev->dev,
                                        "cannot get DFU state: %d\n", ret);
                                goto exit;
                        }
                        need_dfu_state = 0;
                }

                switch (*dfu_state) {
                case STATE_DFU_DOWNLOAD_SYNC:
                        at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_SYNC");
                        ret = at76_dfu_get_status(udev, dfu_stat_buf);
                        if (ret >= 0) {
                                *dfu_state = dfu_stat_buf->state;
                                dfu_timeout = at76_get_timeout(dfu_stat_buf);
                                need_dfu_state = 0;
                        } else
                                dev_err(&udev->dev,
                                        "at76_dfu_get_status returned %d\n",
                                        ret);
                        break;

                case STATE_DFU_DOWNLOAD_BUSY:
                        at76_dbg(DBG_DFU, "STATE_DFU_DOWNLOAD_BUSY");
                        need_dfu_state = 1;

                        at76_dbg(DBG_DFU, "DFU: Resetting device");
                        schedule_timeout_interruptible(dfu_timeout);
                        break;

                case STATE_DFU_DOWNLOAD_IDLE:
                        at76_dbg(DBG_DFU, "DOWNLOAD...");
                        fallthrough;
                case STATE_DFU_IDLE:
                        at76_dbg(DBG_DFU, "DFU IDLE");

                        bsize = min_t(int, size, FW_BLOCK_SIZE);
                        memcpy(block, buf, bsize);
                        at76_dbg(DBG_DFU, "int fw, size left = %5d, "
                                 "bsize = %4d, blockno = %2d", size, bsize,
                                 blockno);
                        ret =
                            at76_load_int_fw_block(udev, blockno, block, bsize);
                        buf += bsize;
                        size -= bsize;
                        blockno++;

                        if (ret != bsize)
                                dev_err(&udev->dev,
                                        "at76_load_int_fw_block returned %d\n",
                                        ret);
                        need_dfu_state = 1;
                        break;

                case STATE_DFU_MANIFEST_SYNC:
                        at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_SYNC");

                        ret = at76_dfu_get_status(udev, dfu_stat_buf);
                        if (ret < 0)
                                break;

                        *dfu_state = dfu_stat_buf->state;
                        dfu_timeout = at76_get_timeout(dfu_stat_buf);
                        need_dfu_state = 0;

                        /* override the timeout from the status response,
                           needed for AT76C505A */
                        if (manifest_sync_timeout > 0)
                                dfu_timeout = manifest_sync_timeout;

                        at76_dbg(DBG_DFU, "DFU: Waiting for manifest phase");
                        schedule_timeout_interruptible(dfu_timeout);
                        break;

                case STATE_DFU_MANIFEST:
                        at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST");
                        is_done = 1;
                        break;

                case STATE_DFU_MANIFEST_WAIT_RESET:
                        at76_dbg(DBG_DFU, "STATE_DFU_MANIFEST_WAIT_RESET");
                        is_done = 1;
                        break;

                case STATE_DFU_UPLOAD_IDLE:
                        at76_dbg(DBG_DFU, "STATE_DFU_UPLOAD_IDLE");
                        break;

                case STATE_DFU_ERROR:
                        at76_dbg(DBG_DFU, "STATE_DFU_ERROR");
                        ret = -EPIPE;
                        break;

                default:
                        at76_dbg(DBG_DFU, "DFU UNKNOWN STATE (%d)", *dfu_state);
                        ret = -EINVAL;
                        break;
                }
        } while (!is_done && (ret >= 0));

exit:
        kfree(dfu_state);
        kfree(block);
        kfree(dfu_stat_buf);

        if (ret >= 0)
                ret = 0;

        return ret;
}

/* LED trigger */
static int tx_activity;
static void at76_ledtrig_tx_timerfunc(struct timer_list *unused);
static DEFINE_TIMER(ledtrig_tx_timer, at76_ledtrig_tx_timerfunc);
DEFINE_LED_TRIGGER(ledtrig_tx);

static void at76_ledtrig_tx_timerfunc(struct timer_list *unused)
{
        static int tx_lastactivity;

        if (tx_lastactivity != tx_activity) {
                tx_lastactivity = tx_activity;
                led_trigger_event(ledtrig_tx, LED_FULL);
                mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
        } else
                led_trigger_event(ledtrig_tx, LED_OFF);
}

static void at76_ledtrig_tx_activity(void)
{
        tx_activity++;
        if (!timer_pending(&ledtrig_tx_timer))
                mod_timer(&ledtrig_tx_timer, jiffies + HZ / 4);
}

static int at76_remap(struct usb_device *udev)
{
        int ret;
        ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0a,
                              USB_TYPE_VENDOR | USB_DIR_OUT |
                              USB_RECIP_INTERFACE, 0, 0, NULL, 0,
                              USB_CTRL_GET_TIMEOUT);
        if (ret < 0)
                return ret;
        return 0;
}

static int at76_get_op_mode(struct usb_device *udev)
{
        int ret;
        u8 saved;
        u8 *op_mode;

        op_mode = kmalloc(1, GFP_NOIO);
        if (!op_mode)
                return -ENOMEM;
        ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
                              USB_TYPE_VENDOR | USB_DIR_IN |
                              USB_RECIP_INTERFACE, 0x01, 0, op_mode, 1,
                              USB_CTRL_GET_TIMEOUT);
        saved = *op_mode;
        kfree(op_mode);

        if (ret < 0)
                return ret;
        else if (ret < 1)
                return -EIO;
        else
                return saved;
}

/* Load a block of the second ("external") part of the firmware */
static inline int at76_load_ext_fw_block(struct usb_device *udev, int blockno,
                                         void *block, int size)
{
        return usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
                               USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
                               0x0802, blockno, block, size,
                               USB_CTRL_GET_TIMEOUT);
}

static inline int at76_get_hw_cfg(struct usb_device *udev,
                                  union at76_hwcfg *buf, int buf_size)
{
        return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
                               USB_TYPE_VENDOR | USB_DIR_IN |
                               USB_RECIP_INTERFACE, 0x0a02, 0,
                               buf, buf_size, USB_CTRL_GET_TIMEOUT);
}

/* Intersil boards use a different "value" for GetHWConfig requests */
static inline int at76_get_hw_cfg_intersil(struct usb_device *udev,
                                           union at76_hwcfg *buf, int buf_size)
{
        return usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
                               USB_TYPE_VENDOR | USB_DIR_IN |
                               USB_RECIP_INTERFACE, 0x0902, 0,
                               buf, buf_size, USB_CTRL_GET_TIMEOUT);
}

/* Get the hardware configuration for the adapter and put it to the appropriate
 * fields of 'priv' (the GetHWConfig request and interpretation of the result
 * depends on the board type) */
static int at76_get_hw_config(struct at76_priv *priv)
{
        int ret;
        union at76_hwcfg *hwcfg = kmalloc_obj(*hwcfg);

        if (!hwcfg)
                return -ENOMEM;

        if (at76_is_intersil(priv->board_type)) {
                ret = at76_get_hw_cfg_intersil(priv->udev, hwcfg,
                                               sizeof(hwcfg->i));
                if (ret < 0)
                        goto exit;
                memcpy(priv->mac_addr, hwcfg->i.mac_addr, ETH_ALEN);
                priv->regulatory_domain = hwcfg->i.regulatory_domain;
        } else if (at76_is_503rfmd(priv->board_type)) {
                ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r3));
                if (ret < 0)
                        goto exit;
                memcpy(priv->mac_addr, hwcfg->r3.mac_addr, ETH_ALEN);
                priv->regulatory_domain = hwcfg->r3.regulatory_domain;
        } else {
                ret = at76_get_hw_cfg(priv->udev, hwcfg, sizeof(hwcfg->r5));
                if (ret < 0)
                        goto exit;
                memcpy(priv->mac_addr, hwcfg->r5.mac_addr, ETH_ALEN);
                priv->regulatory_domain = hwcfg->r5.regulatory_domain;
        }

exit:
        kfree(hwcfg);
        if (ret < 0)
                wiphy_err(priv->hw->wiphy, "cannot get HW Config (error %d)\n",
                          ret);

        return ret;
}

static struct reg_domain const *at76_get_reg_domain(u16 code)
{
        int i;
        static struct reg_domain const fd_tab[] = {
                { 0x10, "FCC (USA)", 0x7ff },   /* ch 1-11 */
                { 0x20, "IC (Canada)", 0x7ff }, /* ch 1-11 */
                { 0x30, "ETSI (most of Europe)", 0x1fff },      /* ch 1-13 */
                { 0x31, "Spain", 0x600 },       /* ch 10-11 */
                { 0x32, "France", 0x1e00 },     /* ch 10-13 */
                { 0x40, "MKK (Japan)", 0x2000 },        /* ch 14 */
                { 0x41, "MKK1 (Japan)", 0x3fff },       /* ch 1-14 */
                { 0x50, "Israel", 0x3fc },      /* ch 3-9 */
                { 0x00, "<unknown>", 0xffffffff }       /* ch 1-32 */
        };

        /* Last entry is fallback for unknown domain code */
        for (i = 0; i < ARRAY_SIZE(fd_tab) - 1; i++)
                if (code == fd_tab[i].code)
                        break;

        return &fd_tab[i];
}

static inline int at76_get_mib(struct usb_device *udev, u16 mib, void *buf,
                               int buf_size)
{
        int ret;

        ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x33,
                              USB_TYPE_VENDOR | USB_DIR_IN |
                              USB_RECIP_INTERFACE, mib << 8, 0, buf, buf_size,
                              USB_CTRL_GET_TIMEOUT);
        if (ret >= 0 && ret != buf_size)
                return -EIO;
        return ret;
}

/* Return positive number for status, negative for an error */
static inline int at76_get_cmd_status(struct usb_device *udev, u8 cmd)
{
        u8 *stat_buf;
        int ret;

        stat_buf = kmalloc(40, GFP_NOIO);
        if (!stat_buf)
                return -ENOMEM;

        ret = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0), 0x22,
                        USB_TYPE_VENDOR | USB_DIR_IN |
                        USB_RECIP_INTERFACE, cmd, 0, stat_buf,
                        40, USB_CTRL_GET_TIMEOUT);
        if (ret >= 0)
                ret = stat_buf[5];
        kfree(stat_buf);

        return ret;
}

#define MAKE_CMD_CASE(c) case (c): return #c
static const char *at76_get_cmd_string(u8 cmd_status)
{
        switch (cmd_status) {
                MAKE_CMD_CASE(CMD_SET_MIB);
                MAKE_CMD_CASE(CMD_GET_MIB);
                MAKE_CMD_CASE(CMD_SCAN);
                MAKE_CMD_CASE(CMD_JOIN);
                MAKE_CMD_CASE(CMD_START_IBSS);
                MAKE_CMD_CASE(CMD_RADIO_ON);
                MAKE_CMD_CASE(CMD_RADIO_OFF);
                MAKE_CMD_CASE(CMD_STARTUP);
        }

        return "UNKNOWN";
}

static int at76_set_card_command(struct usb_device *udev, u8 cmd, void *buf,
                                 int buf_size)
{
        int ret;
        size_t total_size;
        struct at76_command *cmd_buf;

        total_size = struct_size(cmd_buf, data, buf_size);
        cmd_buf = kmalloc(total_size, GFP_KERNEL);
        if (!cmd_buf)
                return -ENOMEM;

        cmd_buf->cmd = cmd;
        cmd_buf->reserved = 0;
        cmd_buf->size = cpu_to_le16(buf_size);
        memcpy(cmd_buf->data, buf, buf_size);

        at76_dbg_dump(DBG_CMD, cmd_buf, total_size,
                      "issuing command %s (0x%02x)",
                      at76_get_cmd_string(cmd), cmd);

        ret = usb_control_msg(udev, usb_sndctrlpipe(udev, 0), 0x0e,
                              USB_TYPE_VENDOR | USB_DIR_OUT | USB_RECIP_DEVICE,
                              0, 0, cmd_buf, total_size, USB_CTRL_GET_TIMEOUT);
        kfree(cmd_buf);
        return ret;
}

#define MAKE_CMD_STATUS_CASE(c) case (c): return #c
static const char *at76_get_cmd_status_string(u8 cmd_status)
{
        switch (cmd_status) {
                MAKE_CMD_STATUS_CASE(CMD_STATUS_IDLE);
                MAKE_CMD_STATUS_CASE(CMD_STATUS_COMPLETE);
                MAKE_CMD_STATUS_CASE(CMD_STATUS_UNKNOWN);
                MAKE_CMD_STATUS_CASE(CMD_STATUS_INVALID_PARAMETER);
                MAKE_CMD_STATUS_CASE(CMD_STATUS_FUNCTION_NOT_SUPPORTED);
                MAKE_CMD_STATUS_CASE(CMD_STATUS_TIME_OUT);
                MAKE_CMD_STATUS_CASE(CMD_STATUS_IN_PROGRESS);
                MAKE_CMD_STATUS_CASE(CMD_STATUS_HOST_FAILURE);
                MAKE_CMD_STATUS_CASE(CMD_STATUS_SCAN_FAILED);
        }

        return "UNKNOWN";
}

/* Wait until the command is completed */
static int at76_wait_completion(struct at76_priv *priv, int cmd)
{
        int status = 0;
        unsigned long timeout = jiffies + CMD_COMPLETION_TIMEOUT;

        do {
                status = at76_get_cmd_status(priv->udev, cmd);
                if (status < 0) {
                        wiphy_err(priv->hw->wiphy,
                                  "at76_get_cmd_status failed: %d\n",
                                  status);
                        break;
                }

                at76_dbg(DBG_WAIT_COMPLETE,
                         "%s: Waiting on cmd %d, status = %d (%s)",
                         wiphy_name(priv->hw->wiphy), cmd, status,
                         at76_get_cmd_status_string(status));

                if (status != CMD_STATUS_IN_PROGRESS
                    && status != CMD_STATUS_IDLE)
                        break;

                schedule_timeout_interruptible(HZ / 10);        /* 100 ms */
                if (time_after(jiffies, timeout)) {
                        wiphy_err(priv->hw->wiphy,
                                  "completion timeout for command %d\n", cmd);
                        status = -ETIMEDOUT;
                        break;
                }
        } while (1);

        return status;
}

static int at76_set_mib(struct at76_priv *priv, struct set_mib_buffer *buf)
{
        int ret;

        ret = at76_set_card_command(priv->udev, CMD_SET_MIB, buf,
                                    offsetof(struct set_mib_buffer,
                                             data) + buf->size);
        if (ret < 0)
                return ret;

        ret = at76_wait_completion(priv, CMD_SET_MIB);
        if (ret != CMD_STATUS_COMPLETE) {
                wiphy_info(priv->hw->wiphy,
                           "set_mib: at76_wait_completion failed with %d\n",
                           ret);
                ret = -EIO;
        }

        return ret;
}

/* Return < 0 on error, == 0 if no command sent, == 1 if cmd sent */
static int at76_set_radio(struct at76_priv *priv, int enable)
{
        int ret;
        int cmd;

        if (priv->radio_on == enable)
                return 0;

        cmd = enable ? CMD_RADIO_ON : CMD_RADIO_OFF;

        ret = at76_set_card_command(priv->udev, cmd, NULL, 0);
        if (ret < 0)
                wiphy_err(priv->hw->wiphy,
                          "at76_set_card_command(%d) failed: %d\n", cmd, ret);
        else
                ret = 1;

        priv->radio_on = enable;
        return ret;
}

/* Set current power save mode (AT76_PM_OFF/AT76_PM_ON/AT76_PM_SMART) */
static int at76_set_pm_mode(struct at76_priv *priv)
{
        int ret = 0;

        priv->mib_buf.type = MIB_MAC_MGMT;
        priv->mib_buf.size = 1;
        priv->mib_buf.index = offsetof(struct mib_mac_mgmt, power_mgmt_mode);
        priv->mib_buf.data.byte = priv->pm_mode;

        ret = at76_set_mib(priv, &priv->mib_buf);
        if (ret < 0)
                wiphy_err(priv->hw->wiphy, "set_mib (pm_mode) failed: %d\n",
                          ret);

        return ret;
}

static int at76_set_preamble(struct at76_priv *priv, u8 type)
{
        int ret = 0;

        priv->mib_buf.type = MIB_LOCAL;
        priv->mib_buf.size = 1;
        priv->mib_buf.index = offsetof(struct mib_local, preamble_type);
        priv->mib_buf.data.byte = type;

        ret = at76_set_mib(priv, &priv->mib_buf);
        if (ret < 0)
                wiphy_err(priv->hw->wiphy, "set_mib (preamble) failed: %d\n",
                          ret);

        return ret;
}

static int at76_set_frag(struct at76_priv *priv, u16 size)
{
        int ret = 0;

        priv->mib_buf.type = MIB_MAC;
        priv->mib_buf.size = 2;
        priv->mib_buf.index = offsetof(struct mib_mac, frag_threshold);
        priv->mib_buf.data.word = cpu_to_le16(size);

        ret = at76_set_mib(priv, &priv->mib_buf);
        if (ret < 0)
                wiphy_err(priv->hw->wiphy,
                          "set_mib (frag threshold) failed: %d\n", ret);

        return ret;
}

static int at76_set_rts(struct at76_priv *priv, u16 size)
{
        int ret = 0;

        priv->mib_buf.type = MIB_MAC;
        priv->mib_buf.size = 2;
        priv->mib_buf.index = offsetof(struct mib_mac, rts_threshold);
        priv->mib_buf.data.word = cpu_to_le16(size);

        ret = at76_set_mib(priv, &priv->mib_buf);
        if (ret < 0)
                wiphy_err(priv->hw->wiphy, "set_mib (rts) failed: %d\n", ret);

        return ret;
}

static int at76_set_autorate_fallback(struct at76_priv *priv, int onoff)
{
        int ret = 0;

        priv->mib_buf.type = MIB_LOCAL;
        priv->mib_buf.size = 1;
        priv->mib_buf.index = offsetof(struct mib_local, txautorate_fallback);
        priv->mib_buf.data.byte = onoff;

        ret = at76_set_mib(priv, &priv->mib_buf);
        if (ret < 0)
                wiphy_err(priv->hw->wiphy,
                          "set_mib (autorate fallback) failed: %d\n", ret);

        return ret;
}

static void at76_dump_mib_mac_addr(struct at76_priv *priv)
{
        int i;
        int ret;
        struct mib_mac_addr *m = kmalloc_obj(*m);

        if (!m)
                return;

        ret = at76_get_mib(priv->udev, MIB_MAC_ADDR, m, sizeof(*m));
        if (ret < 0) {
                wiphy_err(priv->hw->wiphy,
                          "at76_get_mib (MAC_ADDR) failed: %d\n", ret);
                goto exit;
        }

        at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: mac_addr %pM res 0x%x 0x%x",
                 wiphy_name(priv->hw->wiphy),
                 m->mac_addr, m->res[0], m->res[1]);
        for (i = 0; i < ARRAY_SIZE(m->group_addr); i++)
                at76_dbg(DBG_MIB, "%s: MIB MAC_ADDR: group addr %d: %pM, "
                         "status %d", wiphy_name(priv->hw->wiphy), i,
                         m->group_addr[i], m->group_addr_status[i]);
exit:
        kfree(m);
}

static void at76_dump_mib_mac_wep(struct at76_priv *priv)
{
        int i;
        int ret;
        int key_len;
        struct mib_mac_wep *m = kmalloc_obj(*m);

        if (!m)
                return;

        ret = at76_get_mib(priv->udev, MIB_MAC_WEP, m, sizeof(*m));
        if (ret < 0) {
                wiphy_err(priv->hw->wiphy,
                          "at76_get_mib (MAC_WEP) failed: %d\n", ret);
                goto exit;
        }

        at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: priv_invoked %u def_key_id %u "
                 "key_len %u excl_unencr %u wep_icv_err %u wep_excluded %u "
                 "encr_level %u key %d", wiphy_name(priv->hw->wiphy),
                 m->privacy_invoked, m->wep_default_key_id,
                 m->wep_key_mapping_len, m->exclude_unencrypted,
                 le32_to_cpu(m->wep_icv_error_count),
                 le32_to_cpu(m->wep_excluded_count), m->encryption_level,
                 m->wep_default_key_id);

        key_len = (m->encryption_level == 1) ?
            WEP_SMALL_KEY_LEN : WEP_LARGE_KEY_LEN;

        for (i = 0; i < WEP_KEYS; i++)
                at76_dbg(DBG_MIB, "%s: MIB MAC_WEP: key %d: %*phD",
                         wiphy_name(priv->hw->wiphy), i,
                         key_len, m->wep_default_keyvalue[i]);
exit:
        kfree(m);
}

static void at76_dump_mib_mac_mgmt(struct at76_priv *priv)
{
        int ret;
        struct mib_mac_mgmt *m = kmalloc_obj(*m);

        if (!m)
                return;

        ret = at76_get_mib(priv->udev, MIB_MAC_MGMT, m, sizeof(*m));
        if (ret < 0) {
                wiphy_err(priv->hw->wiphy,
                          "at76_get_mib (MAC_MGMT) failed: %d\n", ret);
                goto exit;
        }

        at76_dbg(DBG_MIB, "%s: MIB MAC_MGMT: beacon_period %d CFP_max_duration "
                 "%d medium_occupancy_limit %d station_id 0x%x ATIM_window %d "
                 "CFP_mode %d privacy_opt_impl %d DTIM_period %d CFP_period %d "
                 "current_bssid %pM current_essid %*phD current_bss_type %d "
                 "pm_mode %d ibss_change %d res %d "
                 "multi_domain_capability_implemented %d "
                 "international_roaming %d country_string %.3s",
                 wiphy_name(priv->hw->wiphy), le16_to_cpu(m->beacon_period),
                 le16_to_cpu(m->CFP_max_duration),
                 le16_to_cpu(m->medium_occupancy_limit),
                 le16_to_cpu(m->station_id), le16_to_cpu(m->ATIM_window),
                 m->CFP_mode, m->privacy_option_implemented, m->DTIM_period,
                 m->CFP_period, m->current_bssid,
                 IW_ESSID_MAX_SIZE, m->current_essid,
                 m->current_bss_type, m->power_mgmt_mode, m->ibss_change,
                 m->res, m->multi_domain_capability_implemented,
                 m->multi_domain_capability_enabled, m->country_string);
exit:
        kfree(m);
}

static void at76_dump_mib_mac(struct at76_priv *priv)
{
        int ret;
        struct mib_mac *m = kmalloc_obj(*m);

        if (!m)
                return;

        ret = at76_get_mib(priv->udev, MIB_MAC, m, sizeof(*m));
        if (ret < 0) {
                wiphy_err(priv->hw->wiphy,
                          "at76_get_mib (MAC) failed: %d\n", ret);
                goto exit;
        }

        at76_dbg(DBG_MIB, "%s: MIB MAC: max_tx_msdu_lifetime %d "
                 "max_rx_lifetime %d frag_threshold %d rts_threshold %d "
                 "cwmin %d cwmax %d short_retry_time %d long_retry_time %d "
                 "scan_type %d scan_channel %d probe_delay %u "
                 "min_channel_time %d max_channel_time %d listen_int %d "
                 "desired_ssid %*phD desired_bssid %pM desired_bsstype %d",
                 wiphy_name(priv->hw->wiphy),
                 le32_to_cpu(m->max_tx_msdu_lifetime),
                 le32_to_cpu(m->max_rx_lifetime),
                 le16_to_cpu(m->frag_threshold), le16_to_cpu(m->rts_threshold),
                 le16_to_cpu(m->cwmin), le16_to_cpu(m->cwmax),
                 m->short_retry_time, m->long_retry_time, m->scan_type,
                 m->scan_channel, le16_to_cpu(m->probe_delay),
                 le16_to_cpu(m->min_channel_time),
                 le16_to_cpu(m->max_channel_time),
                 le16_to_cpu(m->listen_interval),
                 IW_ESSID_MAX_SIZE, m->desired_ssid,
                 m->desired_bssid, m->desired_bsstype);
exit:
        kfree(m);
}

static void at76_dump_mib_phy(struct at76_priv *priv)
{
        int ret;
        struct mib_phy *m = kmalloc_obj(*m);

        if (!m)
                return;

        ret = at76_get_mib(priv->udev, MIB_PHY, m, sizeof(*m));
        if (ret < 0) {
                wiphy_err(priv->hw->wiphy,
                          "at76_get_mib (PHY) failed: %d\n", ret);
                goto exit;
        }

        at76_dbg(DBG_MIB, "%s: MIB PHY: ed_threshold %d slot_time %d "
                 "sifs_time %d preamble_length %d plcp_header_length %d "
                 "mpdu_max_length %d cca_mode_supported %d operation_rate_set "
                 "0x%x 0x%x 0x%x 0x%x channel_id %d current_cca_mode %d "
                 "phy_type %d current_reg_domain %d",
                 wiphy_name(priv->hw->wiphy), le32_to_cpu(m->ed_threshold),
                 le16_to_cpu(m->slot_time), le16_to_cpu(m->sifs_time),
                 le16_to_cpu(m->preamble_length),
                 le16_to_cpu(m->plcp_header_length),
                 le16_to_cpu(m->mpdu_max_length),
                 le16_to_cpu(m->cca_mode_supported), m->operation_rate_set[0],
                 m->operation_rate_set[1], m->operation_rate_set[2],
                 m->operation_rate_set[3], m->channel_id, m->current_cca_mode,
                 m->phy_type, m->current_reg_domain);
exit:
        kfree(m);
}

static void at76_dump_mib_local(struct at76_priv *priv)
{
        int ret;
        struct mib_local *m = kmalloc_obj(*m);

        if (!m)
                return;

        ret = at76_get_mib(priv->udev, MIB_LOCAL, m, sizeof(*m));
        if (ret < 0) {
                wiphy_err(priv->hw->wiphy,
                          "at76_get_mib (LOCAL) failed: %d\n", ret);
                goto exit;
        }

        at76_dbg(DBG_MIB, "%s: MIB LOCAL: beacon_enable %d "
                 "txautorate_fallback %d ssid_size %d promiscuous_mode %d "
                 "preamble_type %d", wiphy_name(priv->hw->wiphy),
                 m->beacon_enable,
                 m->txautorate_fallback, m->ssid_size, m->promiscuous_mode,
                 m->preamble_type);
exit:
        kfree(m);
}

static void at76_dump_mib_mdomain(struct at76_priv *priv)
{
        int ret;
        struct mib_mdomain *m = kmalloc_obj(*m);

        if (!m)
                return;

        ret = at76_get_mib(priv->udev, MIB_MDOMAIN, m, sizeof(*m));
        if (ret < 0) {
                wiphy_err(priv->hw->wiphy,
                          "at76_get_mib (MDOMAIN) failed: %d\n", ret);
                goto exit;
        }

        at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: channel_list %*phD",
                 wiphy_name(priv->hw->wiphy),
                 (int)sizeof(m->channel_list), m->channel_list);

        at76_dbg(DBG_MIB, "%s: MIB MDOMAIN: tx_powerlevel %*phD",
                 wiphy_name(priv->hw->wiphy),
                 (int)sizeof(m->tx_powerlevel), m->tx_powerlevel);
exit:
        kfree(m);
}

/* Enable monitor mode */
static int at76_start_monitor(struct at76_priv *priv)
{
        struct at76_req_scan scan;
        int ret;

        memset(&scan, 0, sizeof(struct at76_req_scan));
        eth_broadcast_addr(scan.bssid);

        scan.channel = priv->channel;
        scan.scan_type = SCAN_TYPE_PASSIVE;
        scan.international_scan = 0;
        scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
        scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
        scan.probe_delay = cpu_to_le16(0);

        ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));
        if (ret >= 0)
                ret = at76_get_cmd_status(priv->udev, CMD_SCAN);

        return ret;
}

/* Calculate padding from txbuf->wlength (which excludes the USB TX header),
   likely to compensate a flaw in the AT76C503A USB part ... */
static inline int at76_calc_padding(int wlen)
{
        /* add the USB TX header */
        wlen += AT76_TX_HDRLEN;

        wlen = wlen % 64;

        if (wlen < 50)
                return 50 - wlen;

        if (wlen >= 61)
                return 64 + 50 - wlen;

        return 0;
}

static void at76_rx_callback(struct urb *urb)
{
        struct at76_priv *priv = urb->context;

        tasklet_schedule(&priv->rx_tasklet);
}

static int at76_submit_rx_urb(struct at76_priv *priv)
{
        int ret;
        int size;
        struct sk_buff *skb = priv->rx_skb;

        if (!priv->rx_urb) {
                wiphy_err(priv->hw->wiphy, "%s: priv->rx_urb is NULL\n",
                          __func__);
                return -EFAULT;
        }

        if (!skb) {
                skb = dev_alloc_skb(sizeof(struct at76_rx_buffer));
                if (!skb) {
                        wiphy_err(priv->hw->wiphy,
                                  "cannot allocate rx skbuff\n");
                        ret = -ENOMEM;
                        goto exit;
                }
                priv->rx_skb = skb;
        } else {
                skb_push(skb, skb_headroom(skb));
                skb_trim(skb, 0);
        }

        size = skb_tailroom(skb);
        usb_fill_bulk_urb(priv->rx_urb, priv->udev, priv->rx_pipe,
                          skb_put(skb, size), size, at76_rx_callback, priv);
        ret = usb_submit_urb(priv->rx_urb, GFP_ATOMIC);
        if (ret < 0) {
                if (ret == -ENODEV)
                        at76_dbg(DBG_DEVSTART,
                                 "usb_submit_urb returned -ENODEV");
                else
                        wiphy_err(priv->hw->wiphy,
                                  "rx, usb_submit_urb failed: %d\n", ret);
        }

exit:
        if (ret < 0 && ret != -ENODEV)
                wiphy_err(priv->hw->wiphy,
                          "cannot submit rx urb - please unload the driver and/or power cycle the device\n");

        return ret;
}

/* Download external firmware */
static int at76_load_external_fw(struct usb_device *udev, struct fwentry *fwe)
{
        int ret;
        int op_mode;
        int blockno = 0;
        int bsize;
        u8 *block;
        u8 *buf = fwe->extfw;
        int size = fwe->extfw_size;

        if (!buf || !size)
                return -ENOENT;

        op_mode = at76_get_op_mode(udev);
        at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);

        if (op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
                dev_err(&udev->dev, "unexpected opmode %d\n", op_mode);
                return -EINVAL;
        }

        block = kmalloc(FW_BLOCK_SIZE, GFP_KERNEL);
        if (!block)
                return -ENOMEM;

        at76_dbg(DBG_DEVSTART, "downloading external firmware");

        /* for fw >= 0.100, the device needs an extra empty block */
        do {
                bsize = min_t(int, size, FW_BLOCK_SIZE);
                memcpy(block, buf, bsize);
                at76_dbg(DBG_DEVSTART,
                         "ext fw, size left = %5d, bsize = %4d, blockno = %2d",
                         size, bsize, blockno);
                ret = at76_load_ext_fw_block(udev, blockno, block, bsize);
                if (ret != bsize) {
                        dev_err(&udev->dev,
                                "loading %dth firmware block failed: %d\n",
                                blockno, ret);
                        ret = -EIO;
                        goto exit;
                }
                buf += bsize;
                size -= bsize;
                blockno++;
        } while (bsize > 0);

        if (at76_is_505a(fwe->board_type)) {
                at76_dbg(DBG_DEVSTART, "200 ms delay for 505a");
                schedule_timeout_interruptible(HZ / 5 + 1);
        }

exit:
        kfree(block);
        if (ret < 0)
                dev_err(&udev->dev,
                        "downloading external firmware failed: %d\n", ret);
        return ret;
}

/* Download internal firmware */
static int at76_load_internal_fw(struct usb_device *udev, struct fwentry *fwe)
{
        int ret;
        int need_remap = !at76_is_505a(fwe->board_type);

        ret = at76_usbdfu_download(udev, fwe->intfw, fwe->intfw_size,
                                   need_remap ? 0 : 2 * HZ);

        if (ret < 0) {
                dev_err(&udev->dev,
                        "downloading internal fw failed with %d\n", ret);
                goto exit;
        }

        at76_dbg(DBG_DEVSTART, "sending REMAP");

        /* no REMAP for 505A (see SF driver) */
        if (need_remap) {
                ret = at76_remap(udev);
                if (ret < 0) {
                        dev_err(&udev->dev,
                                "sending REMAP failed with %d\n", ret);
                        goto exit;
                }
        }

        at76_dbg(DBG_DEVSTART, "sleeping for 2 seconds");
        schedule_timeout_interruptible(2 * HZ + 1);
        usb_reset_device(udev);

exit:
        return ret;
}

static int at76_startup_device(struct at76_priv *priv)
{
        struct at76_card_config *ccfg = &priv->card_config;
        int ret;

        at76_dbg(DBG_PARAMS,
                 "%s param: ssid %.*s (%*phD) mode %s ch %d wep %s key %d "
                 "keylen %d", wiphy_name(priv->hw->wiphy), priv->essid_size,
                 priv->essid, IW_ESSID_MAX_SIZE, priv->essid,
                 priv->iw_mode == IW_MODE_ADHOC ? "adhoc" : "infra",
                 priv->channel, priv->wep_enabled ? "enabled" : "disabled",
                 priv->wep_key_id, priv->wep_keys_len[priv->wep_key_id]);
        at76_dbg(DBG_PARAMS,
                 "%s param: preamble %s rts %d retry %d frag %d "
                 "txrate %s auth_mode %d", wiphy_name(priv->hw->wiphy),
                 preambles[priv->preamble_type], priv->rts_threshold,
                 priv->short_retry_limit, priv->frag_threshold,
                 priv->txrate == TX_RATE_1MBIT ? "1MBit" : priv->txrate ==
                 TX_RATE_2MBIT ? "2MBit" : priv->txrate ==
                 TX_RATE_5_5MBIT ? "5.5MBit" : priv->txrate ==
                 TX_RATE_11MBIT ? "11MBit" : priv->txrate ==
                 TX_RATE_AUTO ? "auto" : "<invalid>", priv->auth_mode);
        at76_dbg(DBG_PARAMS,
                 "%s param: pm_mode %d pm_period %d auth_mode %s "
                 "scan_times %d %d scan_mode %s",
                 wiphy_name(priv->hw->wiphy), priv->pm_mode, priv->pm_period,
                 priv->auth_mode == WLAN_AUTH_OPEN ? "open" : "shared_secret",
                 priv->scan_min_time, priv->scan_max_time,
                 priv->scan_mode == SCAN_TYPE_ACTIVE ? "active" : "passive");

        memset(ccfg, 0, sizeof(*ccfg));
        ccfg->promiscuous_mode = 0;
        ccfg->short_retry_limit = priv->short_retry_limit;

        if (priv->wep_enabled) {
                if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN)
                        ccfg->encryption_type = 2;
                else
                        ccfg->encryption_type = 1;

                /* jal: always exclude unencrypted if WEP is active */
                ccfg->exclude_unencrypted = 1;
        } else {
                ccfg->exclude_unencrypted = 0;
                ccfg->encryption_type = 0;
        }

        ccfg->rts_threshold = cpu_to_le16(priv->rts_threshold);
        ccfg->fragmentation_threshold = cpu_to_le16(priv->frag_threshold);

        memcpy(ccfg->basic_rate_set, hw_rates, 4);
        /* jal: really needed, we do a set_mib for autorate later ??? */
        ccfg->auto_rate_fallback = (priv->txrate == TX_RATE_AUTO ? 1 : 0);
        ccfg->channel = priv->channel;
        ccfg->privacy_invoked = priv->wep_enabled;
        memcpy(ccfg->current_ssid, priv->essid, IW_ESSID_MAX_SIZE);
        ccfg->ssid_len = priv->essid_size;

        ccfg->wep_default_key_id = priv->wep_key_id;
        memcpy(ccfg->wep_default_key_value, priv->wep_keys,
               sizeof(priv->wep_keys));

        ccfg->short_preamble = priv->preamble_type;
        ccfg->beacon_period = cpu_to_le16(priv->beacon_period);

        ret = at76_set_card_command(priv->udev, CMD_STARTUP, &priv->card_config,
                                    sizeof(*ccfg));
        if (ret < 0) {
                wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n",
                          ret);
                return ret;
        }

        at76_wait_completion(priv, CMD_STARTUP);

        /* remove BSSID from previous run */
        eth_zero_addr(priv->bssid);

        priv->scanning = false;

        if (at76_set_radio(priv, 1) == 1)
                at76_wait_completion(priv, CMD_RADIO_ON);

        ret = at76_set_preamble(priv, priv->preamble_type);
        if (ret < 0)
                return ret;

        ret = at76_set_frag(priv, priv->frag_threshold);
        if (ret < 0)
                return ret;

        ret = at76_set_rts(priv, priv->rts_threshold);
        if (ret < 0)
                return ret;

        ret = at76_set_autorate_fallback(priv,
                                         priv->txrate == TX_RATE_AUTO ? 1 : 0);
        if (ret < 0)
                return ret;

        ret = at76_set_pm_mode(priv);
        if (ret < 0)
                return ret;

        if (at76_debug & DBG_MIB) {
                at76_dump_mib_mac(priv);
                at76_dump_mib_mac_addr(priv);
                at76_dump_mib_mac_mgmt(priv);
                at76_dump_mib_mac_wep(priv);
                at76_dump_mib_mdomain(priv);
                at76_dump_mib_phy(priv);
                at76_dump_mib_local(priv);
        }

        return 0;
}

/* Enable or disable promiscuous mode */
static void at76_work_set_promisc(struct work_struct *work)
{
        struct at76_priv *priv = container_of(work, struct at76_priv,
                                              work_set_promisc);
        int ret = 0;

        if (priv->device_unplugged)
                return;

        mutex_lock(&priv->mtx);

        priv->mib_buf.type = MIB_LOCAL;
        priv->mib_buf.size = 1;
        priv->mib_buf.index = offsetof(struct mib_local, promiscuous_mode);
        priv->mib_buf.data.byte = priv->promisc ? 1 : 0;

        ret = at76_set_mib(priv, &priv->mib_buf);
        if (ret < 0)
                wiphy_err(priv->hw->wiphy,
                          "set_mib (promiscuous_mode) failed: %d\n", ret);

        mutex_unlock(&priv->mtx);
}

/* Submit Rx urb back to the device */
static void at76_work_submit_rx(struct work_struct *work)
{
        struct at76_priv *priv = container_of(work, struct at76_priv,
                                              work_submit_rx);

        mutex_lock(&priv->mtx);
        at76_submit_rx_urb(priv);
        mutex_unlock(&priv->mtx);
}

/* This is a workaround to make scan working:
 * currently mac80211 does not process frames with no frequency
 * information.
 * However during scan the HW performs a sweep by itself, and we
 * are unable to know where the radio is actually tuned.
 * This function tries to do its best to guess this information..
 * During scan, If the current frame is a beacon or a probe response,
 * the channel information is extracted from it.
 * When not scanning, for other frames, or if it happens that for
 * whatever reason we fail to parse beacons and probe responses, this
 * function returns the priv->channel information, that should be correct
 * at least when we are not scanning.
 */
static inline int at76_guess_freq(struct at76_priv *priv)
{
        size_t el_off;
        const u8 *el;
        int channel = priv->channel;
        int len = priv->rx_skb->len;
        struct ieee80211_hdr *hdr = (void *)priv->rx_skb->data;

        if (!priv->scanning)
                goto exit;

        if (len < 24)
                goto exit;

        if (ieee80211_is_probe_resp(hdr->frame_control)) {
                el_off = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
                el = ((struct ieee80211_mgmt *)hdr)->u.probe_resp.variable;
        } else if (ieee80211_is_beacon(hdr->frame_control)) {
                el_off = offsetof(struct ieee80211_mgmt, u.beacon.variable);
                el = ((struct ieee80211_mgmt *)hdr)->u.beacon.variable;
        } else {
                goto exit;
        }
        len -= el_off;

        el = cfg80211_find_ie(WLAN_EID_DS_PARAMS, el, len);
        if (el && el[1] > 0)
                channel = el[2];

exit:
        return ieee80211_channel_to_frequency(channel, NL80211_BAND_2GHZ);
}

static void at76_rx_tasklet(struct tasklet_struct *t)
{
        struct at76_priv *priv = from_tasklet(priv, t, rx_tasklet);
        struct urb *urb = priv->rx_urb;
        struct at76_rx_buffer *buf;
        struct ieee80211_rx_status rx_status = { 0 };

        if (priv->device_unplugged) {
                at76_dbg(DBG_DEVSTART, "device unplugged");
                at76_dbg(DBG_DEVSTART, "urb status %d", urb->status);
                return;
        }

        if (!priv->rx_skb || !priv->rx_skb->data)
                return;

        buf = (struct at76_rx_buffer *)priv->rx_skb->data;

        if (urb->status != 0) {
                if (urb->status != -ENOENT && urb->status != -ECONNRESET)
                        at76_dbg(DBG_URB,
                                 "%s %s: - nonzero Rx bulk status received: %d",
                                 __func__, wiphy_name(priv->hw->wiphy),
                                 urb->status);
                return;
        }

        at76_dbg(DBG_RX_ATMEL_HDR,
                 "%s: rx frame: rate %d rssi %d noise %d link %d",
                 wiphy_name(priv->hw->wiphy), buf->rx_rate, buf->rssi,
                 buf->noise_level, buf->link_quality);

        skb_pull(priv->rx_skb, AT76_RX_HDRLEN);
        skb_trim(priv->rx_skb, le16_to_cpu(buf->wlength));
        at76_dbg_dump(DBG_RX_DATA, priv->rx_skb->data,
                      priv->rx_skb->len, "RX: len=%d", priv->rx_skb->len);

        rx_status.signal = buf->rssi;
        rx_status.flag |= RX_FLAG_DECRYPTED;
        rx_status.flag |= RX_FLAG_IV_STRIPPED;
        rx_status.band = NL80211_BAND_2GHZ;
        rx_status.freq = at76_guess_freq(priv);

        at76_dbg(DBG_MAC80211, "calling ieee80211_rx_irqsafe(): %d/%d",
                 priv->rx_skb->len, priv->rx_skb->data_len);
        memcpy(IEEE80211_SKB_RXCB(priv->rx_skb), &rx_status, sizeof(rx_status));
        ieee80211_rx_irqsafe(priv->hw, priv->rx_skb);

        /* Use a new skb for the next receive */
        priv->rx_skb = NULL;

        at76_submit_rx_urb(priv);
}

/* Load firmware into kernel memory and parse it */
static struct fwentry *at76_load_firmware(struct usb_device *udev,
                                          enum board_type board_type)
{
        int ret;
        char *str;
        struct at76_fw_header *fwh;
        struct fwentry *fwe = &firmwares[board_type];

        mutex_lock(&fw_mutex);

        if (fwe->loaded) {
                at76_dbg(DBG_FW, "re-using previously loaded fw");
                goto exit;
        }

        at76_dbg(DBG_FW, "downloading firmware %s", fwe->fwname);
        ret = request_firmware(&fwe->fw, fwe->fwname, &udev->dev);
        if (ret < 0) {
                dev_err(&udev->dev, "firmware %s not found!\n",
                        fwe->fwname);
                dev_err(&udev->dev,
                        "you may need to download the firmware from http://developer.berlios.de/projects/at76c503a/\n");
                goto exit;
        }

        at76_dbg(DBG_FW, "got it.");
        fwh = (struct at76_fw_header *)(fwe->fw->data);

        if (fwe->fw->size <= sizeof(*fwh)) {
                dev_err(&udev->dev,
                        "firmware is too short (0x%zx)\n", fwe->fw->size);
                goto exit;
        }

        /* CRC currently not checked */
        fwe->board_type = le32_to_cpu(fwh->board_type);
        if (fwe->board_type != board_type) {
                dev_err(&udev->dev,
                        "board type mismatch, requested %u, got %u\n",
                        board_type, fwe->board_type);
                goto exit;
        }

        fwe->fw_version.major = fwh->major;
        fwe->fw_version.minor = fwh->minor;
        fwe->fw_version.patch = fwh->patch;
        fwe->fw_version.build = fwh->build;

        str = (char *)fwh + le32_to_cpu(fwh->str_offset);
        fwe->intfw = (u8 *)fwh + le32_to_cpu(fwh->int_fw_offset);
        fwe->intfw_size = le32_to_cpu(fwh->int_fw_len);
        fwe->extfw = (u8 *)fwh + le32_to_cpu(fwh->ext_fw_offset);
        fwe->extfw_size = le32_to_cpu(fwh->ext_fw_len);

        fwe->loaded = 1;

        dev_printk(KERN_DEBUG, &udev->dev,
                   "using firmware %s (version %d.%d.%d-%d)\n",
                   fwe->fwname, fwh->major, fwh->minor, fwh->patch, fwh->build);

        at76_dbg(DBG_DEVSTART, "board %u, int %d:%d, ext %d:%d", board_type,
                 le32_to_cpu(fwh->int_fw_offset), le32_to_cpu(fwh->int_fw_len),
                 le32_to_cpu(fwh->ext_fw_offset), le32_to_cpu(fwh->ext_fw_len));
        at76_dbg(DBG_DEVSTART, "firmware id %s", str);

exit:
        mutex_unlock(&fw_mutex);

        if (fwe->loaded)
                return fwe;
        else
                return NULL;
}

static int at76_join(struct at76_priv *priv)
{
        struct at76_req_join join;
        int ret;

        memset(&join, 0, sizeof(struct at76_req_join));
        memcpy(join.essid, priv->essid, priv->essid_size);
        join.essid_size = priv->essid_size;
        memcpy(join.bssid, priv->bssid, ETH_ALEN);
        join.bss_type = INFRASTRUCTURE_MODE;
        join.channel = priv->channel;
        join.timeout = cpu_to_le16(2000);

        at76_dbg(DBG_MAC80211, "%s: sending CMD_JOIN", __func__);
        ret = at76_set_card_command(priv->udev, CMD_JOIN, &join,
                                    sizeof(struct at76_req_join));

        if (ret < 0) {
                wiphy_err(priv->hw->wiphy, "at76_set_card_command failed: %d\n",
                          ret);
                return 0;
        }

        ret = at76_wait_completion(priv, CMD_JOIN);
        at76_dbg(DBG_MAC80211, "%s: CMD_JOIN returned: 0x%02x", __func__, ret);
        if (ret != CMD_STATUS_COMPLETE) {
                wiphy_err(priv->hw->wiphy, "at76_wait_completion failed: %d\n",
                          ret);
                return 0;
        }

        at76_set_pm_mode(priv);

        return 0;
}

static void at76_work_join_bssid(struct work_struct *work)
{
        struct at76_priv *priv = container_of(work, struct at76_priv,
                                              work_join_bssid);

        if (priv->device_unplugged)
                return;

        mutex_lock(&priv->mtx);

        if (is_valid_ether_addr(priv->bssid))
                at76_join(priv);

        mutex_unlock(&priv->mtx);
}

static void at76_mac80211_tx_callback(struct urb *urb)
{
        struct at76_priv *priv = urb->context;
        struct ieee80211_tx_info *info = IEEE80211_SKB_CB(priv->tx_skb);

        at76_dbg(DBG_MAC80211, "%s()", __func__);

        switch (urb->status) {
        case 0:
                /* success */
                info->flags |= IEEE80211_TX_STAT_ACK;
                break;
        case -ENOENT:
        case -ECONNRESET:
                /* fail, urb has been unlinked */
                /* FIXME: add error message */
                break;
        default:
                at76_dbg(DBG_URB, "%s - nonzero tx status received: %d",
                         __func__, urb->status);
                break;
        }

        memset(&info->status, 0, sizeof(info->status));

        ieee80211_tx_status_irqsafe(priv->hw, priv->tx_skb);

        priv->tx_skb = NULL;

        ieee80211_wake_queues(priv->hw);
}

static void at76_mac80211_tx(struct ieee80211_hw *hw,
                             struct ieee80211_tx_control *control,
                             struct sk_buff *skb)
{
        struct at76_priv *priv = hw->priv;
        struct at76_tx_buffer *tx_buffer = priv->bulk_out_buffer;
        struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
        struct ieee80211_mgmt *mgmt = (struct ieee80211_mgmt *)skb->data;
        int padding, submit_len, ret;

        at76_dbg(DBG_MAC80211, "%s()", __func__);

        if (priv->tx_urb->status == -EINPROGRESS) {
                wiphy_err(priv->hw->wiphy,
                          "%s called while tx urb is pending\n", __func__);
                dev_kfree_skb_any(skb);
                return;
        }

        /* The following code lines are important when the device is going to
         * authenticate with a new bssid. The driver must send CMD_JOIN before
         * an authentication frame is transmitted. For this to succeed, the
         * correct bssid of the AP must be known. As mac80211 does not inform
         * drivers about the bssid prior to the authentication process the
         * following workaround is necessary. If the TX frame is an
         * authentication frame extract the bssid and send the CMD_JOIN. */
        if (mgmt->frame_control & cpu_to_le16(IEEE80211_STYPE_AUTH)) {
                if (!ether_addr_equal_64bits(priv->bssid, mgmt->bssid)) {
                        memcpy(priv->bssid, mgmt->bssid, ETH_ALEN);
                        ieee80211_queue_work(hw, &priv->work_join_bssid);
                        dev_kfree_skb_any(skb);
                        return;
                }
        }

        ieee80211_stop_queues(hw);

        at76_ledtrig_tx_activity();     /* tell ledtrigger we send a packet */

        WARN_ON(priv->tx_skb != NULL);

        priv->tx_skb = skb;
        padding = at76_calc_padding(skb->len);
        submit_len = AT76_TX_HDRLEN + skb->len + padding;

        /* setup 'Atmel' header */
        memset(tx_buffer, 0, sizeof(*tx_buffer));
        tx_buffer->padding = padding;
        tx_buffer->wlength = cpu_to_le16(skb->len);
        tx_buffer->tx_rate = ieee80211_get_tx_rate(hw, info)->hw_value;
        memset(tx_buffer->reserved, 0, sizeof(tx_buffer->reserved));
        memcpy(tx_buffer->packet, skb->data, skb->len);

        at76_dbg(DBG_TX_DATA, "%s tx: wlen 0x%x pad 0x%x rate %d hdr",
                 wiphy_name(priv->hw->wiphy), le16_to_cpu(tx_buffer->wlength),
                 tx_buffer->padding, tx_buffer->tx_rate);

        /* send stuff */
        at76_dbg_dump(DBG_TX_DATA_CONTENT, tx_buffer, submit_len,
                      "%s(): tx_buffer %d bytes:", __func__, submit_len);
        usb_fill_bulk_urb(priv->tx_urb, priv->udev, priv->tx_pipe, tx_buffer,
                          submit_len, at76_mac80211_tx_callback, priv);
        ret = usb_submit_urb(priv->tx_urb, GFP_ATOMIC);
        if (ret) {
                wiphy_err(priv->hw->wiphy, "error in tx submit urb: %d\n", ret);
                if (ret == -EINVAL)
                        wiphy_err(priv->hw->wiphy,
                                  "-EINVAL: tx urb %p hcpriv %p complete %p\n",
                                  priv->tx_urb,
                                  priv->tx_urb->hcpriv, priv->tx_urb->complete);
        }
}

static int at76_mac80211_start(struct ieee80211_hw *hw)
{
        struct at76_priv *priv = hw->priv;
        int ret;

        at76_dbg(DBG_MAC80211, "%s()", __func__);

        mutex_lock(&priv->mtx);

        ret = at76_submit_rx_urb(priv);
        if (ret < 0) {
                wiphy_err(priv->hw->wiphy, "open: submit_rx_urb failed: %d\n",
                          ret);
                goto error;
        }

        at76_startup_device(priv);

        at76_start_monitor(priv);

error:
        mutex_unlock(&priv->mtx);

        return 0;
}

static void at76_mac80211_stop(struct ieee80211_hw *hw, bool suspend)
{
        struct at76_priv *priv = hw->priv;

        at76_dbg(DBG_MAC80211, "%s()", __func__);

        cancel_delayed_work(&priv->dwork_hw_scan);
        cancel_work_sync(&priv->work_join_bssid);
        cancel_work_sync(&priv->work_set_promisc);

        mutex_lock(&priv->mtx);

        if (!priv->device_unplugged) {
                /* We are called by "ifconfig ethX down", not because the
                 * device is not available anymore. */
                at76_set_radio(priv, 0);

                /* We unlink rx_urb because at76_open() re-submits it.
                 * If unplugged, at76_delete_device() takes care of it. */
                usb_kill_urb(priv->rx_urb);
        }

        mutex_unlock(&priv->mtx);
}

static int at76_add_interface(struct ieee80211_hw *hw,
                              struct ieee80211_vif *vif)
{
        struct at76_priv *priv = hw->priv;
        int ret = 0;

        at76_dbg(DBG_MAC80211, "%s()", __func__);

        mutex_lock(&priv->mtx);

        switch (vif->type) {
        case NL80211_IFTYPE_STATION:
                priv->iw_mode = IW_MODE_INFRA;
                break;
        default:
                ret = -EOPNOTSUPP;
                goto exit;
        }

exit:
        mutex_unlock(&priv->mtx);

        return ret;
}

static void at76_remove_interface(struct ieee80211_hw *hw,
                                  struct ieee80211_vif *vif)
{
        at76_dbg(DBG_MAC80211, "%s()", __func__);
}

static void at76_dwork_hw_scan(struct work_struct *work)
{
        struct at76_priv *priv = container_of(work, struct at76_priv,
                                              dwork_hw_scan.work);
        struct cfg80211_scan_info info = {
                .aborted = false,
        };
        int ret;

        if (priv->device_unplugged)
                return;

        mutex_lock(&priv->mtx);

        ret = at76_get_cmd_status(priv->udev, CMD_SCAN);
        at76_dbg(DBG_MAC80211, "%s: CMD_SCAN status 0x%02x", __func__, ret);

        /* FIXME: add maximum time for scan to complete */

        if (ret != CMD_STATUS_COMPLETE) {
                ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
                                             SCAN_POLL_INTERVAL);
                mutex_unlock(&priv->mtx);
                return;
        }

        if (is_valid_ether_addr(priv->bssid))
                at76_join(priv);

        priv->scanning = false;

        mutex_unlock(&priv->mtx);

        ieee80211_scan_completed(priv->hw, &info);

        ieee80211_wake_queues(priv->hw);
}

static int at76_hw_scan(struct ieee80211_hw *hw,
                        struct ieee80211_vif *vif,
                        struct ieee80211_scan_request *hw_req)
{
        struct cfg80211_scan_request *req = &hw_req->req;
        struct at76_priv *priv = hw->priv;
        struct at76_req_scan scan;
        u8 *ssid = NULL;
        int ret, len = 0;

        at76_dbg(DBG_MAC80211, "%s():", __func__);

        if (priv->device_unplugged)
                return 0;

        mutex_lock(&priv->mtx);

        ieee80211_stop_queues(hw);

        memset(&scan, 0, sizeof(struct at76_req_scan));
        eth_broadcast_addr(scan.bssid);

        if (req->n_ssids) {
                scan.scan_type = SCAN_TYPE_ACTIVE;
                ssid = req->ssids[0].ssid;
                len = req->ssids[0].ssid_len;
        } else {
                scan.scan_type = SCAN_TYPE_PASSIVE;
        }

        if (len) {
                memcpy(scan.essid, ssid, len);
                scan.essid_size = len;
        }

        scan.min_channel_time = cpu_to_le16(priv->scan_min_time);
        scan.max_channel_time = cpu_to_le16(priv->scan_max_time);
        scan.probe_delay = cpu_to_le16(priv->scan_min_time * 1000);
        scan.international_scan = 0;

        at76_dbg(DBG_MAC80211, "%s: sending CMD_SCAN", __func__);
        ret = at76_set_card_command(priv->udev, CMD_SCAN, &scan, sizeof(scan));

        if (ret < 0) {
                wiphy_err(priv->hw->wiphy, "CMD_SCAN failed: %d\n", ret);
                goto exit;
        }

        priv->scanning = true;
        ieee80211_queue_delayed_work(priv->hw, &priv->dwork_hw_scan,
                                     SCAN_POLL_INTERVAL);

exit:
        mutex_unlock(&priv->mtx);

        return 0;
}

static int at76_config(struct ieee80211_hw *hw, int radio_idx, u32 changed)
{
        struct at76_priv *priv = hw->priv;

        at76_dbg(DBG_MAC80211, "%s(): channel %d",
                 __func__, hw->conf.chandef.chan->hw_value);
        at76_dbg_dump(DBG_MAC80211, priv->bssid, ETH_ALEN, "bssid:");

        mutex_lock(&priv->mtx);

        priv->channel = hw->conf.chandef.chan->hw_value;

        if (is_valid_ether_addr(priv->bssid))
                at76_join(priv);
        else
                at76_start_monitor(priv);

        mutex_unlock(&priv->mtx);

        return 0;
}

static void at76_bss_info_changed(struct ieee80211_hw *hw,
                                  struct ieee80211_vif *vif,
                                  struct ieee80211_bss_conf *conf,
                                  u64 changed)
{
        struct at76_priv *priv = hw->priv;

        at76_dbg(DBG_MAC80211, "%s():", __func__);

        if (!(changed & BSS_CHANGED_BSSID))
                return;

        at76_dbg_dump(DBG_MAC80211, conf->bssid, ETH_ALEN, "bssid:");

        mutex_lock(&priv->mtx);

        memcpy(priv->bssid, conf->bssid, ETH_ALEN);

        if (is_valid_ether_addr(priv->bssid))
                /* mac80211 is joining a bss */
                at76_join(priv);

        mutex_unlock(&priv->mtx);
}

/* must be atomic */
static void at76_configure_filter(struct ieee80211_hw *hw,
                                  unsigned int changed_flags,
                                  unsigned int *total_flags, u64 multicast)
{
        struct at76_priv *priv = hw->priv;
        int flags;

        at76_dbg(DBG_MAC80211, "%s(): changed_flags=0x%08x "
                 "total_flags=0x%08x",
                 __func__, changed_flags, *total_flags);

        flags = changed_flags & AT76_SUPPORTED_FILTERS;
        *total_flags = AT76_SUPPORTED_FILTERS;

        /* Bail out after updating flags to prevent a WARN_ON in mac80211. */
        if (priv->device_unplugged)
                return;

        /* FIXME: access to priv->promisc should be protected with
         * priv->mtx, but it's impossible because this function needs to be
         * atomic */

        if (flags && !priv->promisc) {
                /* mac80211 wants us to enable promiscuous mode */
                priv->promisc = 1;
        } else if (!flags && priv->promisc) {
                /* we need to disable promiscuous mode */
                priv->promisc = 0;
        } else
                return;

        ieee80211_queue_work(hw, &priv->work_set_promisc);
}

static int at76_set_wep(struct at76_priv *priv)
{
        int ret = 0;
        struct mib_mac_wep *mib_data = &priv->mib_buf.data.wep_mib;

        priv->mib_buf.type = MIB_MAC_WEP;
        priv->mib_buf.size = sizeof(struct mib_mac_wep);
        priv->mib_buf.index = 0;

        memset(mib_data, 0, sizeof(*mib_data));

        if (priv->wep_enabled) {
                if (priv->wep_keys_len[priv->wep_key_id] > WEP_SMALL_KEY_LEN)
                        mib_data->encryption_level = 2;
                else
                        mib_data->encryption_level = 1;

                /* always exclude unencrypted if WEP is active */
                mib_data->exclude_unencrypted = 1;
        } else {
                mib_data->exclude_unencrypted = 0;
                mib_data->encryption_level = 0;
        }

        mib_data->privacy_invoked = priv->wep_enabled;
        mib_data->wep_default_key_id = priv->wep_key_id;
        memcpy(mib_data->wep_default_keyvalue, priv->wep_keys,
               sizeof(priv->wep_keys));

        ret = at76_set_mib(priv, &priv->mib_buf);

        if (ret < 0)
                wiphy_err(priv->hw->wiphy,
                          "set_mib (wep) failed: %d\n", ret);

        return ret;
}

static int at76_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
                        struct ieee80211_vif *vif, struct ieee80211_sta *sta,
                        struct ieee80211_key_conf *key)
{
        struct at76_priv *priv = hw->priv;

        int i;

        at76_dbg(DBG_MAC80211, "%s(): cmd %d key->cipher %d key->keyidx %d "
                 "key->keylen %d",
                 __func__, cmd, key->cipher, key->keyidx, key->keylen);

        if ((key->cipher != WLAN_CIPHER_SUITE_WEP40) &&
            (key->cipher != WLAN_CIPHER_SUITE_WEP104))
                return -EOPNOTSUPP;

        key->hw_key_idx = key->keyidx;

        mutex_lock(&priv->mtx);

        switch (cmd) {
        case SET_KEY:
                memcpy(priv->wep_keys[key->keyidx], key->key, key->keylen);
                priv->wep_keys_len[key->keyidx] = key->keylen;

                /* FIXME: find out how to do this properly */
                priv->wep_key_id = key->keyidx;

                break;
        case DISABLE_KEY:
        default:
                priv->wep_keys_len[key->keyidx] = 0;
                break;
        }

        priv->wep_enabled = 0;

        for (i = 0; i < WEP_KEYS; i++) {
                if (priv->wep_keys_len[i] != 0)
                        priv->wep_enabled = 1;
        }

        at76_set_wep(priv);

        mutex_unlock(&priv->mtx);

        return 0;
}

static const struct ieee80211_ops at76_ops = {
        .add_chanctx = ieee80211_emulate_add_chanctx,
        .remove_chanctx = ieee80211_emulate_remove_chanctx,
        .change_chanctx = ieee80211_emulate_change_chanctx,
        .switch_vif_chanctx = ieee80211_emulate_switch_vif_chanctx,
        .tx = at76_mac80211_tx,
        .wake_tx_queue = ieee80211_handle_wake_tx_queue,
        .add_interface = at76_add_interface,
        .remove_interface = at76_remove_interface,
        .config = at76_config,
        .bss_info_changed = at76_bss_info_changed,
        .configure_filter = at76_configure_filter,
        .start = at76_mac80211_start,
        .stop = at76_mac80211_stop,
        .hw_scan = at76_hw_scan,
        .set_key = at76_set_key,
};

/* Allocate network device and initialize private data */
static struct at76_priv *at76_alloc_new_device(struct usb_device *udev)
{
        struct ieee80211_hw *hw;
        struct at76_priv *priv;

        hw = ieee80211_alloc_hw(sizeof(struct at76_priv), &at76_ops);
        if (!hw) {
                printk(KERN_ERR DRIVER_NAME ": could not register"
                       " ieee80211_hw\n");
                return NULL;
        }

        priv = hw->priv;
        priv->hw = hw;

        priv->udev = udev;

        mutex_init(&priv->mtx);
        INIT_WORK(&priv->work_set_promisc, at76_work_set_promisc);
        INIT_WORK(&priv->work_submit_rx, at76_work_submit_rx);
        INIT_WORK(&priv->work_join_bssid, at76_work_join_bssid);
        INIT_DELAYED_WORK(&priv->dwork_hw_scan, at76_dwork_hw_scan);

        tasklet_setup(&priv->rx_tasklet, at76_rx_tasklet);

        priv->pm_mode = AT76_PM_OFF;
        priv->pm_period = 0;

        /* unit us */

        return priv;
}

static int at76_alloc_urbs(struct at76_priv *priv,
                           struct usb_interface *interface)
{
        struct usb_endpoint_descriptor *endpoint, *ep_in, *ep_out;
        int i;
        int buffer_size;
        struct usb_host_interface *iface_desc;

        at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);

        at76_dbg(DBG_URB, "%s: NumEndpoints %d ", __func__,
                 interface->cur_altsetting->desc.bNumEndpoints);

        ep_in = NULL;
        ep_out = NULL;
        iface_desc = interface->cur_altsetting;
        for (i = 0; i < iface_desc->desc.bNumEndpoints; i++) {
                endpoint = &iface_desc->endpoint[i].desc;

                at76_dbg(DBG_URB, "%s: %d. endpoint: addr 0x%x attr 0x%x",
                         __func__, i, endpoint->bEndpointAddress,
                         endpoint->bmAttributes);

                if (!ep_in && usb_endpoint_is_bulk_in(endpoint))
                        ep_in = endpoint;

                if (!ep_out && usb_endpoint_is_bulk_out(endpoint))
                        ep_out = endpoint;
        }

        if (!ep_in || !ep_out) {
                dev_err(&interface->dev, "bulk endpoints missing\n");
                return -ENXIO;
        }

        priv->rx_pipe = usb_rcvbulkpipe(priv->udev, ep_in->bEndpointAddress);
        priv->tx_pipe = usb_sndbulkpipe(priv->udev, ep_out->bEndpointAddress);

        priv->rx_urb = usb_alloc_urb(0, GFP_KERNEL);
        priv->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
        if (!priv->rx_urb || !priv->tx_urb) {
                dev_err(&interface->dev, "cannot allocate URB\n");
                return -ENOMEM;
        }

        buffer_size = sizeof(struct at76_tx_buffer) + MAX_PADDING_SIZE;
        priv->bulk_out_buffer = kmalloc(buffer_size, GFP_KERNEL);
        if (!priv->bulk_out_buffer)
                return -ENOMEM;

        at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);

        return 0;
}

static struct ieee80211_rate at76_rates[] = {
        { .bitrate = 10, .hw_value = TX_RATE_1MBIT, },
        { .bitrate = 20, .hw_value = TX_RATE_2MBIT, },
        { .bitrate = 55, .hw_value = TX_RATE_5_5MBIT, },
        { .bitrate = 110, .hw_value = TX_RATE_11MBIT, },
};

static struct ieee80211_channel at76_channels[] = {
        { .center_freq = 2412, .hw_value = 1 },
        { .center_freq = 2417, .hw_value = 2 },
        { .center_freq = 2422, .hw_value = 3 },
        { .center_freq = 2427, .hw_value = 4 },
        { .center_freq = 2432, .hw_value = 5 },
        { .center_freq = 2437, .hw_value = 6 },
        { .center_freq = 2442, .hw_value = 7 },
        { .center_freq = 2447, .hw_value = 8 },
        { .center_freq = 2452, .hw_value = 9 },
        { .center_freq = 2457, .hw_value = 10 },
        { .center_freq = 2462, .hw_value = 11 },
        { .center_freq = 2467, .hw_value = 12 },
        { .center_freq = 2472, .hw_value = 13 },
        { .center_freq = 2484, .hw_value = 14 }
};

static struct ieee80211_supported_band at76_supported_band = {
        .channels = at76_channels,
        .n_channels = ARRAY_SIZE(at76_channels),
        .bitrates = at76_rates,
        .n_bitrates = ARRAY_SIZE(at76_rates),
};

/* Register network device and initialize the hardware */
static int at76_init_new_device(struct at76_priv *priv,
                                struct usb_interface *interface)
{
        struct wiphy *wiphy;
        size_t len;
        int ret;

        /* set up the endpoint information */
        /* check out the endpoints */

        at76_dbg(DBG_DEVSTART, "USB interface: %d endpoints",
                 interface->cur_altsetting->desc.bNumEndpoints);

        ret = at76_alloc_urbs(priv, interface);
        if (ret < 0)
                goto exit;

        /* MAC address */
        ret = at76_get_hw_config(priv);
        if (ret < 0) {
                dev_err(&interface->dev, "cannot get MAC address\n");
                goto exit;
        }

        priv->domain = at76_get_reg_domain(priv->regulatory_domain);

        priv->channel = DEF_CHANNEL;
        priv->iw_mode = IW_MODE_INFRA;
        priv->rts_threshold = DEF_RTS_THRESHOLD;
        priv->frag_threshold = DEF_FRAG_THRESHOLD;
        priv->short_retry_limit = DEF_SHORT_RETRY_LIMIT;
        priv->txrate = TX_RATE_AUTO;
        priv->preamble_type = PREAMBLE_TYPE_LONG;
        priv->beacon_period = 100;
        priv->auth_mode = WLAN_AUTH_OPEN;
        priv->scan_min_time = DEF_SCAN_MIN_TIME;
        priv->scan_max_time = DEF_SCAN_MAX_TIME;
        priv->scan_mode = SCAN_TYPE_ACTIVE;
        priv->device_unplugged = 0;

        /* mac80211 initialisation */
        wiphy = priv->hw->wiphy;
        priv->hw->wiphy->max_scan_ssids = 1;
        priv->hw->wiphy->max_scan_ie_len = 0;
        priv->hw->wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION);
        priv->hw->wiphy->bands[NL80211_BAND_2GHZ] = &at76_supported_band;
        ieee80211_hw_set(priv->hw, RX_INCLUDES_FCS);
        ieee80211_hw_set(priv->hw, SIGNAL_UNSPEC);
        priv->hw->max_signal = 100;

        SET_IEEE80211_DEV(priv->hw, &interface->dev);
        SET_IEEE80211_PERM_ADDR(priv->hw, priv->mac_addr);

        len = sizeof(wiphy->fw_version);
        snprintf(wiphy->fw_version, len, "%d.%d.%d-%d",
                 priv->fw_version.major, priv->fw_version.minor,
                 priv->fw_version.patch, priv->fw_version.build);

        wiphy->hw_version = priv->board_type;

        wiphy_ext_feature_set(wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST);

        ret = ieee80211_register_hw(priv->hw);
        if (ret) {
                printk(KERN_ERR "cannot register mac80211 hw (status %d)!\n",
                       ret);
                goto exit;
        }

        priv->mac80211_registered = 1;

        wiphy_info(priv->hw->wiphy, "USB %s, MAC %pM, firmware %d.%d.%d-%d\n",
                   dev_name(&interface->dev), priv->mac_addr,
                   priv->fw_version.major, priv->fw_version.minor,
                   priv->fw_version.patch, priv->fw_version.build);
        wiphy_info(priv->hw->wiphy, "regulatory domain 0x%02x: %s\n",
                   priv->regulatory_domain, priv->domain->name);

exit:
        return ret;
}

static void at76_delete_device(struct at76_priv *priv)
{
        at76_dbg(DBG_PROC_ENTRY, "%s: ENTER", __func__);

        /* The device is gone, don't bother turning it off */
        priv->device_unplugged = 1;

        tasklet_kill(&priv->rx_tasklet);

        if (priv->mac80211_registered)
                ieee80211_unregister_hw(priv->hw);

        if (priv->tx_urb) {
                usb_kill_urb(priv->tx_urb);
                usb_free_urb(priv->tx_urb);
        }
        if (priv->rx_urb) {
                usb_kill_urb(priv->rx_urb);
                usb_free_urb(priv->rx_urb);
        }

        at76_dbg(DBG_PROC_ENTRY, "%s: unlinked urbs", __func__);

        kfree(priv->bulk_out_buffer);

        timer_delete_sync(&ledtrig_tx_timer);

        kfree_skb(priv->rx_skb);

        at76_dbg(DBG_PROC_ENTRY, "%s: before freeing priv/ieee80211_hw",
                 __func__);
        ieee80211_free_hw(priv->hw);

        at76_dbg(DBG_PROC_ENTRY, "%s: EXIT", __func__);
}

static int at76_probe(struct usb_interface *interface,
                      const struct usb_device_id *id)
{
        int ret;
        struct at76_priv *priv;
        struct fwentry *fwe;
        struct usb_device *udev;
        int op_mode;
        int need_ext_fw = 0;
        struct mib_fw_version *fwv;
        int board_type = (int)id->driver_info;

        udev = usb_get_dev(interface_to_usbdev(interface));

        fwv = kmalloc_obj(*fwv);
        if (!fwv) {
                ret = -ENOMEM;
                goto exit;
        }

        /* Load firmware into kernel memory */
        fwe = at76_load_firmware(udev, board_type);
        if (!fwe) {
                ret = -ENOENT;
                goto exit;
        }

        op_mode = at76_get_op_mode(udev);

        at76_dbg(DBG_DEVSTART, "opmode %d", op_mode);

        /* we get OPMODE_NONE with 2.4.23, SMC2662W-AR ???
           we get 204 with 2.4.23, Fiberline FL-WL240u (505A+RFMD2958) ??? */

        if (op_mode == OPMODE_HW_CONFIG_MODE) {
                dev_err(&interface->dev,
                        "cannot handle a device in HW_CONFIG_MODE\n");
                ret = -EBUSY;
                goto exit;
        }

        if (op_mode != OPMODE_NORMAL_NIC_WITH_FLASH
            && op_mode != OPMODE_NORMAL_NIC_WITHOUT_FLASH) {
                /* download internal firmware part */
                dev_printk(KERN_DEBUG, &interface->dev,
                           "downloading internal firmware\n");
                ret = at76_load_internal_fw(udev, fwe);
                if (ret < 0) {
                        dev_err(&interface->dev,
                                "error %d downloading internal firmware\n",
                                ret);
                }
                goto exit;
        }

        /* Internal firmware already inside the device.  Get firmware
         * version to test if external firmware is loaded.
         * This works only for newer firmware, e.g. the Intersil 0.90.x
         * says "control timeout on ep0in" and subsequent
         * at76_get_op_mode() fail too :-( */

        /* if version >= 0.100.x.y or device with built-in flash we can
         * query the device for the fw version */
        if ((fwe->fw_version.major > 0 || fwe->fw_version.minor >= 100)
            || (op_mode == OPMODE_NORMAL_NIC_WITH_FLASH)) {
                ret = at76_get_mib(udev, MIB_FW_VERSION, fwv, sizeof(*fwv));
                if (ret < 0 || (fwv->major | fwv->minor) == 0)
                        need_ext_fw = 1;
        } else
                /* No way to check firmware version, reload to be sure */
                need_ext_fw = 1;

        if (need_ext_fw) {
                dev_printk(KERN_DEBUG, &interface->dev,
                           "downloading external firmware\n");

                ret = at76_load_external_fw(udev, fwe);
                if (ret < 0)
                        goto exit;

                /* Re-check firmware version */
                ret = at76_get_mib(udev, MIB_FW_VERSION, fwv, sizeof(*fwv));
                if (ret < 0) {
                        dev_err(&interface->dev,
                                "error %d getting firmware version\n", ret);
                        goto exit;
                }
        }

        priv = at76_alloc_new_device(udev);
        if (!priv) {
                ret = -ENOMEM;
                goto exit;
        }

        usb_set_intfdata(interface, priv);

        memcpy(&priv->fw_version, fwv, sizeof(*fwv));
        priv->board_type = board_type;

        ret = at76_init_new_device(priv, interface);
        if (ret < 0)
                at76_delete_device(priv);

exit:
        kfree(fwv);
        if (ret < 0)
                usb_put_dev(udev);
        return ret;
}

static void at76_disconnect(struct usb_interface *interface)
{
        struct at76_priv *priv;

        priv = usb_get_intfdata(interface);
        usb_set_intfdata(interface, NULL);

        /* Disconnect after loading internal firmware */
        if (!priv)
                return;

        wiphy_info(priv->hw->wiphy, "disconnecting\n");
        at76_delete_device(priv);
        usb_put_dev(interface_to_usbdev(interface));
        dev_info(&interface->dev, "disconnected\n");
}

/* Structure for registering this driver with the USB subsystem */
static struct usb_driver at76_driver = {
        .name = DRIVER_NAME,
        .probe = at76_probe,
        .disconnect = at76_disconnect,
        .id_table = dev_table,
        .disable_hub_initiated_lpm = 1,
};

static int __init at76_mod_init(void)
{
        int result;

        printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " loading\n");

        /* register this driver with the USB subsystem */
        result = usb_register(&at76_driver);
        if (result < 0)
                printk(KERN_ERR DRIVER_NAME
                       ": usb_register failed (status %d)\n", result);
        else
                led_trigger_register_simple("at76_usb-tx", &ledtrig_tx);
        return result;
}

static void __exit at76_mod_exit(void)
{
        int i;

        printk(KERN_INFO DRIVER_DESC " " DRIVER_VERSION " unloading\n");
        usb_deregister(&at76_driver);
        for (i = 0; i < ARRAY_SIZE(firmwares); i++)
                release_firmware(firmwares[i].fw);
        led_trigger_unregister_simple(ledtrig_tx);
}

module_param_named(debug, at76_debug, uint, 0600);
MODULE_PARM_DESC(debug, "Debugging level");

module_init(at76_mod_init);
module_exit(at76_mod_exit);

MODULE_AUTHOR("Oliver Kurth <oku@masqmail.cx>");
MODULE_AUTHOR("Joerg Albert <joerg.albert@gmx.de>");
MODULE_AUTHOR("Alex <alex@foogod.com>");
MODULE_AUTHOR("Nick Jones");
MODULE_AUTHOR("Balint Seeber <n0_5p4m_p13453@hotmail.com>");
MODULE_AUTHOR("Pavel Roskin <proski@gnu.org>");
MODULE_AUTHOR("Guido Guenther <agx@sigxcpu.org>");
MODULE_AUTHOR("Kalle Valo <kalle.valo@iki.fi>");
MODULE_AUTHOR("Sebastian Smolorz <sesmo@gmx.net>");
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");