// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * raid5.c : Multiple Devices driver for Linux
 *         Copyright (C) 1996, 1997 Ingo Molnar, Miguel de Icaza, Gadi Oxman
 *         Copyright (C) 1999, 2000 Ingo Molnar
 *         Copyright (C) 2002, 2003 H. Peter Anvin
 *
 * RAID-4/5/6 management functions.
 * Thanks to Penguin Computing for making the RAID-6 development possible
 * by donating a test server!
 */

/*
 * BITMAP UNPLUGGING:
 *
 * The sequencing for updating the bitmap reliably is a little
 * subtle (and I got it wrong the first time) so it deserves some
 * explanation.
 *
 * We group bitmap updates into batches.  Each batch has a number.
 * We may write out several batches at once, but that isn't very important.
 * conf->seq_write is the number of the last batch successfully written.
 * conf->seq_flush is the number of the last batch that was closed to
 *    new additions.
 * When we discover that we will need to write to any block in a stripe
 * (in add_stripe_bio) we update the in-memory bitmap and record in sh->bm_seq
 * the number of the batch it will be in. This is seq_flush+1.
 * When we are ready to do a write, if that batch hasn't been written yet,
 *   we plug the array and queue the stripe for later.
 * When an unplug happens, we increment bm_flush, thus closing the current
 *   batch.
 * When we notice that bm_flush > bm_write, we write out all pending updates
 * to the bitmap, and advance bm_write to where bm_flush was.
 * This may occasionally write a bit out twice, but is sure never to
 * miss any bits.
 */

#include <linux/blkdev.h>
#include <linux/kthread.h>
#include <linux/raid/pq.h>
#include <linux/async_tx.h>
#include <linux/module.h>
#include <linux/async.h>
#include <linux/seq_file.h>
#include <linux/cpu.h>
#include <linux/slab.h>
#include <linux/ratelimit.h>
#include <linux/nodemask.h>

#include <trace/events/block.h>
#include <linux/list_sort.h>

#include "md.h"
#include "raid5.h"
#include "raid0.h"
#include "md-bitmap.h"
#include "raid5-log.h"

#define UNSUPPORTED_MDDEV_FLAGS         \
        ((1L << MD_FAILFAST_SUPPORTED) |        \
         (1L << MD_FAILLAST_DEV) |              \
         (1L << MD_SERIALIZE_POLICY))


#define cpu_to_group(cpu) cpu_to_node(cpu)
#define ANY_GROUP NUMA_NO_NODE

#define RAID5_MAX_REQ_STRIPES 256

static bool devices_handle_discard_safely = false;
module_param(devices_handle_discard_safely, bool, 0644);
MODULE_PARM_DESC(devices_handle_discard_safely,
                 "Set to Y if all devices in each array reliably return zeroes on reads from discarded regions");
static struct workqueue_struct *raid5_wq;

static void raid5_quiesce(struct mddev *mddev, int quiesce);

static inline struct hlist_head *stripe_hash(struct r5conf *conf, sector_t sect)
{
        int hash = (sect >> RAID5_STRIPE_SHIFT(conf)) & HASH_MASK;
        return &conf->stripe_hashtbl[hash];
}

static inline int stripe_hash_locks_hash(struct r5conf *conf, sector_t sect)
{
        return (sect >> RAID5_STRIPE_SHIFT(conf)) & STRIPE_HASH_LOCKS_MASK;
}

static inline void lock_device_hash_lock(struct r5conf *conf, int hash)
        __acquires(&conf->device_lock)
{
        spin_lock_irq(conf->hash_locks + hash);
        spin_lock(&conf->device_lock);
}

static inline void unlock_device_hash_lock(struct r5conf *conf, int hash)
        __releases(&conf->device_lock)
{
        spin_unlock(&conf->device_lock);
        spin_unlock_irq(conf->hash_locks + hash);
}

static inline void lock_all_device_hash_locks_irq(struct r5conf *conf)
        __acquires(&conf->device_lock)
{
        int i;
        spin_lock_irq(conf->hash_locks);
        for (i = 1; i < NR_STRIPE_HASH_LOCKS; i++)
                spin_lock_nest_lock(conf->hash_locks + i, conf->hash_locks);
        spin_lock(&conf->device_lock);
}

static inline void unlock_all_device_hash_locks_irq(struct r5conf *conf)
        __releases(&conf->device_lock)
{
        int i;
        spin_unlock(&conf->device_lock);
        for (i = NR_STRIPE_HASH_LOCKS - 1; i; i--)
                spin_unlock(conf->hash_locks + i);
        spin_unlock_irq(conf->hash_locks);
}

/* Find first data disk in a raid6 stripe */
static inline int raid6_d0(struct stripe_head *sh)
{
        if (sh->ddf_layout)
                /* ddf always start from first device */
                return 0;
        /* md starts just after Q block */
        if (sh->qd_idx == sh->disks - 1)
                return 0;
        else
                return sh->qd_idx + 1;
}
static inline int raid6_next_disk(int disk, int raid_disks)
{
        disk++;
        return (disk < raid_disks) ? disk : 0;
}

/* When walking through the disks in a raid5, starting at raid6_d0,
 * We need to map each disk to a 'slot', where the data disks are slot
 * 0 .. raid_disks-3, the parity disk is raid_disks-2 and the Q disk
 * is raid_disks-1.  This help does that mapping.
 */
static int raid6_idx_to_slot(int idx, struct stripe_head *sh,
                             int *count, int syndrome_disks)
{
        int slot = *count;

        if (sh->ddf_layout)
                (*count)++;
        if (idx == sh->pd_idx)
                return syndrome_disks;
        if (idx == sh->qd_idx)
                return syndrome_disks + 1;
        if (!sh->ddf_layout)
                (*count)++;
        return slot;
}

static void print_raid5_conf(struct r5conf *conf);

static int stripe_operations_active(struct stripe_head *sh)
{
        return sh->check_state || sh->reconstruct_state ||
               test_bit(STRIPE_BIOFILL_RUN, &sh->state) ||
               test_bit(STRIPE_COMPUTE_RUN, &sh->state);
}

static bool stripe_is_lowprio(struct stripe_head *sh)
{
        return (test_bit(STRIPE_R5C_FULL_STRIPE, &sh->state) ||
                test_bit(STRIPE_R5C_PARTIAL_STRIPE, &sh->state)) &&
               !test_bit(STRIPE_R5C_CACHING, &sh->state);
}

static void raid5_wakeup_stripe_thread(struct stripe_head *sh)
        __must_hold(&sh->raid_conf->device_lock)
{
        struct r5conf *conf = sh->raid_conf;
        struct r5worker_group *group;
        int thread_cnt;
        int i, cpu = sh->cpu;

        if (!cpu_online(cpu)) {
                cpu = cpumask_any(cpu_online_mask);
                sh->cpu = cpu;
        }

        if (list_empty(&sh->lru)) {
                struct r5worker_group *group;
                group = conf->worker_groups + cpu_to_group(cpu);
                if (stripe_is_lowprio(sh))
                        list_add_tail(&sh->lru, &group->loprio_list);
                else
                        list_add_tail(&sh->lru, &group->handle_list);
                group->stripes_cnt++;
                sh->group = group;
        }

        if (conf->worker_cnt_per_group == 0) {
                md_wakeup_thread(conf->mddev->thread);
                return;
        }

        group = conf->worker_groups + cpu_to_group(sh->cpu);

        group->workers[0].working = true;
        /* at least one worker should run to avoid race */
        queue_work_on(sh->cpu, raid5_wq, &group->workers[0].work);

        thread_cnt = group->stripes_cnt / MAX_STRIPE_BATCH - 1;
        /* wakeup more workers */
        for (i = 1; i < conf->worker_cnt_per_group && thread_cnt > 0; i++) {
                if (group->workers[i].working == false) {
                        group->workers[i].working = true;
                        queue_work_on(sh->cpu, raid5_wq,
                                      &group->workers[i].work);
                        thread_cnt--;
                }
        }
}

static void do_release_stripe(struct r5conf *conf, struct stripe_head *sh,
                              struct list_head *temp_inactive_list)
        __must_hold(&conf->device_lock)
{
        int i;
        int injournal = 0;      /* number of date pages with R5_InJournal */

        BUG_ON(!list_empty(&sh->lru));
        BUG_ON(atomic_read(&conf->active_stripes)==0);

        if (r5c_is_writeback(conf->log))
                for (i = sh->disks; i--; )
                        if (test_bit(R5_InJournal, &sh->dev[i].flags))
                                injournal++;
        /*
         * In the following cases, the stripe cannot be released to cached
         * lists. Therefore, we make the stripe write out and set
         * STRIPE_HANDLE:
         *   1. when quiesce in r5c write back;
         *   2. when resync is requested fot the stripe.
         */
        if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state) ||
            (conf->quiesce && r5c_is_writeback(conf->log) &&
             !test_bit(STRIPE_HANDLE, &sh->state) && injournal != 0)) {
                if (test_bit(STRIPE_R5C_CACHING, &sh->state))
                        r5c_make_stripe_write_out(sh);
                set_bit(STRIPE_HANDLE, &sh->state);
        }

        if (test_bit(STRIPE_HANDLE, &sh->state)) {
                if (test_bit(STRIPE_DELAYED, &sh->state) &&
                    !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
                        list_add_tail(&sh->lru, &conf->delayed_list);
                else if (test_bit(STRIPE_BIT_DELAY, &sh->state) &&
                           sh->bm_seq - conf->seq_write > 0)
                        list_add_tail(&sh->lru, &conf->bitmap_list);
                else {
                        clear_bit(STRIPE_DELAYED, &sh->state);
                        clear_bit(STRIPE_BIT_DELAY, &sh->state);
                        if (conf->worker_cnt_per_group == 0) {
                                if (stripe_is_lowprio(sh))
                                        list_add_tail(&sh->lru,
                                                        &conf->loprio_list);
                                else
                                        list_add_tail(&sh->lru,
                                                        &conf->handle_list);
                        } else {
                                raid5_wakeup_stripe_thread(sh);
                                return;
                        }
                }
                md_wakeup_thread(conf->mddev->thread);
        } else {
                BUG_ON(stripe_operations_active(sh));
                if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
                        if (atomic_dec_return(&conf->preread_active_stripes)
                            < IO_THRESHOLD)
                                md_wakeup_thread(conf->mddev->thread);
                atomic_dec(&conf->active_stripes);
                if (!test_bit(STRIPE_EXPANDING, &sh->state)) {
                        if (!r5c_is_writeback(conf->log))
                                list_add_tail(&sh->lru, temp_inactive_list);
                        else {
                                WARN_ON(test_bit(R5_InJournal, &sh->dev[sh->pd_idx].flags));
                                if (injournal == 0)
                                        list_add_tail(&sh->lru, temp_inactive_list);
                                else if (injournal == conf->raid_disks - conf->max_degraded) {
                                        /* full stripe */
                                        if (!test_and_set_bit(STRIPE_R5C_FULL_STRIPE, &sh->state))
                                                atomic_inc(&conf->r5c_cached_full_stripes);
                                        if (test_and_clear_bit(STRIPE_R5C_PARTIAL_STRIPE, &sh->state))
                                                atomic_dec(&conf->r5c_cached_partial_stripes);
                                        list_add_tail(&sh->lru, &conf->r5c_full_stripe_list);
                                        r5c_check_cached_full_stripe(conf);
                                } else
                                        /*
                                         * STRIPE_R5C_PARTIAL_STRIPE is set in
                                         * r5c_try_caching_write(). No need to
                                         * set it again.
                                         */
                                        list_add_tail(&sh->lru, &conf->r5c_partial_stripe_list);
                        }
                }
        }
}

static void __release_stripe(struct r5conf *conf, struct stripe_head *sh,
                             struct list_head *temp_inactive_list)
        __must_hold(&conf->device_lock)
{
        if (atomic_dec_and_test(&sh->count))
                do_release_stripe(conf, sh, temp_inactive_list);
}

/*
 * @hash could be NR_STRIPE_HASH_LOCKS, then we have a list of inactive_list
 *
 * Be careful: Only one task can add/delete stripes from temp_inactive_list at
 * given time. Adding stripes only takes device lock, while deleting stripes
 * only takes hash lock.
 */
static void release_inactive_stripe_list(struct r5conf *conf,
                                         struct list_head *temp_inactive_list,
                                         int hash)
{
        int size;
        bool do_wakeup = false;
        unsigned long flags;

        if (hash == NR_STRIPE_HASH_LOCKS) {
                size = NR_STRIPE_HASH_LOCKS;
                hash = NR_STRIPE_HASH_LOCKS - 1;
        } else
                size = 1;
        while (size) {
                struct list_head *list = &temp_inactive_list[size - 1];

                /*
                 * We don't hold any lock here yet, raid5_get_active_stripe() might
                 * remove stripes from the list
                 */
                if (!list_empty_careful(list)) {
                        spin_lock_irqsave(conf->hash_locks + hash, flags);
                        if (list_empty(conf->inactive_list + hash) &&
                            !list_empty(list))
                                atomic_dec(&conf->empty_inactive_list_nr);
                        list_splice_tail_init(list, conf->inactive_list + hash);
                        do_wakeup = true;
                        spin_unlock_irqrestore(conf->hash_locks + hash, flags);
                }
                size--;
                hash--;
        }

        if (do_wakeup) {
                wake_up(&conf->wait_for_stripe);
                if (atomic_read(&conf->active_stripes) == 0)
                        wake_up(&conf->wait_for_quiescent);
                if (conf->retry_read_aligned)
                        md_wakeup_thread(conf->mddev->thread);
        }
}

static int release_stripe_list(struct r5conf *conf,
                               struct list_head *temp_inactive_list)
        __must_hold(&conf->device_lock)
{
        struct stripe_head *sh, *t;
        int count = 0;
        struct llist_node *head;

        head = llist_del_all(&conf->released_stripes);
        head = llist_reverse_order(head);
        llist_for_each_entry_safe(sh, t, head, release_list) {
                int hash;

                /* sh could be readded after STRIPE_ON_RELEASE_LIST is cleard */
                smp_mb();
                clear_bit(STRIPE_ON_RELEASE_LIST, &sh->state);
                /*
                 * Don't worry the bit is set here, because if the bit is set
                 * again, the count is always > 1. This is true for
                 * STRIPE_ON_UNPLUG_LIST bit too.
                 */
                hash = sh->hash_lock_index;
                __release_stripe(conf, sh, &temp_inactive_list[hash]);
                count++;
        }

        return count;
}

void raid5_release_stripe(struct stripe_head *sh)
{
        struct r5conf *conf = sh->raid_conf;
        unsigned long flags;
        struct list_head list;
        int hash;
        bool wakeup;

        /* Avoid release_list until the last reference.
         */
        if (atomic_add_unless(&sh->count, -1, 1))
                return;

        if (unlikely(!conf->mddev->thread) ||
                test_and_set_bit(STRIPE_ON_RELEASE_LIST, &sh->state))
                goto slow_path;
        wakeup = llist_add(&sh->release_list, &conf->released_stripes);
        if (wakeup)
                md_wakeup_thread(conf->mddev->thread);
        return;
slow_path:
        /* we are ok here if STRIPE_ON_RELEASE_LIST is set or not */
        if (atomic_dec_and_lock_irqsave(&sh->count, &conf->device_lock, flags)) {
                INIT_LIST_HEAD(&list);
                hash = sh->hash_lock_index;
                do_release_stripe(conf, sh, &list);
                spin_unlock_irqrestore(&conf->device_lock, flags);
                release_inactive_stripe_list(conf, &list, hash);
        }
}

static inline void remove_hash(struct stripe_head *sh)
{
        pr_debug("remove_hash(), stripe %llu\n",
                (unsigned long long)sh->sector);

        hlist_del_init(&sh->hash);
}

static inline void insert_hash(struct r5conf *conf, struct stripe_head *sh)
{
        struct hlist_head *hp = stripe_hash(conf, sh->sector);

        pr_debug("insert_hash(), stripe %llu\n",
                (unsigned long long)sh->sector);

        hlist_add_head(&sh->hash, hp);
}

/* find an idle stripe, make sure it is unhashed, and return it. */
static struct stripe_head *get_free_stripe(struct r5conf *conf, int hash)
{
        struct stripe_head *sh = NULL;
        struct list_head *first;

        if (list_empty(conf->inactive_list + hash))
                goto out;
        first = (conf->inactive_list + hash)->next;
        sh = list_entry(first, struct stripe_head, lru);
        list_del_init(first);
        remove_hash(sh);
        atomic_inc(&conf->active_stripes);
        BUG_ON(hash != sh->hash_lock_index);
        if (list_empty(conf->inactive_list + hash))
                atomic_inc(&conf->empty_inactive_list_nr);
out:
        return sh;
}

#if PAGE_SIZE != DEFAULT_STRIPE_SIZE
static void free_stripe_pages(struct stripe_head *sh)
{
        int i;
        struct page *p;

        /* Have not allocate page pool */
        if (!sh->pages)
                return;

        for (i = 0; i < sh->nr_pages; i++) {
                p = sh->pages[i];
                if (p)
                        put_page(p);
                sh->pages[i] = NULL;
        }
}

static int alloc_stripe_pages(struct stripe_head *sh, gfp_t gfp)
{
        int i;
        struct page *p;

        for (i = 0; i < sh->nr_pages; i++) {
                /* The page have allocated. */
                if (sh->pages[i])
                        continue;

                p = alloc_page(gfp);
                if (!p) {
                        free_stripe_pages(sh);
                        return -ENOMEM;
                }
                sh->pages[i] = p;
        }
        return 0;
}

static int
init_stripe_shared_pages(struct stripe_head *sh, struct r5conf *conf, int disks)
{
        int nr_pages, cnt;

        if (sh->pages)
                return 0;

        /* Each of the sh->dev[i] need one conf->stripe_size */
        cnt = PAGE_SIZE / conf->stripe_size;
        nr_pages = (disks + cnt - 1) / cnt;

        sh->pages = kzalloc_objs(struct page *, nr_pages);
        if (!sh->pages)
                return -ENOMEM;
        sh->nr_pages = nr_pages;
        sh->stripes_per_page = cnt;
        return 0;
}
#endif

static void shrink_buffers(struct stripe_head *sh)
{
        int i;
        int num = sh->raid_conf->pool_size;

#if PAGE_SIZE == DEFAULT_STRIPE_SIZE
        for (i = 0; i < num ; i++) {
                struct page *p;

                WARN_ON(sh->dev[i].page != sh->dev[i].orig_page);
                p = sh->dev[i].page;
                if (!p)
                        continue;
                sh->dev[i].page = NULL;
                put_page(p);
        }
#else
        for (i = 0; i < num; i++)
                sh->dev[i].page = NULL;
        free_stripe_pages(sh); /* Free pages */
#endif
}

static int grow_buffers(struct stripe_head *sh, gfp_t gfp)
{
        int i;
        int num = sh->raid_conf->pool_size;

#if PAGE_SIZE == DEFAULT_STRIPE_SIZE
        for (i = 0; i < num; i++) {
                struct page *page;

                if (!(page = alloc_page(gfp))) {
                        return 1;
                }
                sh->dev[i].page = page;
                sh->dev[i].orig_page = page;
                sh->dev[i].offset = 0;
        }
#else
        if (alloc_stripe_pages(sh, gfp))
                return -ENOMEM;

        for (i = 0; i < num; i++) {
                sh->dev[i].page = raid5_get_dev_page(sh, i);
                sh->dev[i].orig_page = sh->dev[i].page;
                sh->dev[i].offset = raid5_get_page_offset(sh, i);
        }
#endif
        return 0;
}

static void stripe_set_idx(sector_t stripe, struct r5conf *conf, int previous,
                            struct stripe_head *sh);

static void init_stripe(struct stripe_head *sh, sector_t sector, int previous)
{
        struct r5conf *conf = sh->raid_conf;
        int i, seq;

        BUG_ON(atomic_read(&sh->count) != 0);
        BUG_ON(test_bit(STRIPE_HANDLE, &sh->state));
        BUG_ON(stripe_operations_active(sh));
        BUG_ON(sh->batch_head);

        pr_debug("init_stripe called, stripe %llu\n",
                (unsigned long long)sector);
retry:
        seq = read_seqcount_begin(&conf->gen_lock);
        sh->generation = conf->generation - previous;
        sh->disks = previous ? conf->previous_raid_disks : conf->raid_disks;
        sh->sector = sector;
        stripe_set_idx(sector, conf, previous, sh);
        sh->state = 0;

        for (i = sh->disks; i--; ) {
                struct r5dev *dev = &sh->dev[i];

                if (dev->toread || dev->read || dev->towrite || dev->written ||
                    test_bit(R5_LOCKED, &dev->flags)) {
                        pr_err("sector=%llx i=%d %p %p %p %p %d\n",
                               (unsigned long long)sh->sector, i, dev->toread,
                               dev->read, dev->towrite, dev->written,
                               test_bit(R5_LOCKED, &dev->flags));
                        WARN_ON(1);
                }
                dev->flags = 0;
                dev->sector = raid5_compute_blocknr(sh, i, previous);
        }
        if (read_seqcount_retry(&conf->gen_lock, seq))
                goto retry;
        sh->overwrite_disks = 0;
        insert_hash(conf, sh);
        sh->cpu = smp_processor_id();
        set_bit(STRIPE_BATCH_READY, &sh->state);
}

static struct stripe_head *__find_stripe(struct r5conf *conf, sector_t sector,
                                         short generation)
{
        struct stripe_head *sh;

        pr_debug("__find_stripe, sector %llu\n", (unsigned long long)sector);
        hlist_for_each_entry(sh, stripe_hash(conf, sector), hash)
                if (sh->sector == sector && sh->generation == generation)
                        return sh;
        pr_debug("__stripe %llu not in cache\n", (unsigned long long)sector);
        return NULL;
}

static struct stripe_head *find_get_stripe(struct r5conf *conf,
                sector_t sector, short generation, int hash)
{
        int inc_empty_inactive_list_flag;
        struct stripe_head *sh;

        sh = __find_stripe(conf, sector, generation);
        if (!sh)
                return NULL;

        if (atomic_inc_not_zero(&sh->count))
                return sh;

        /*
         * Slow path. The reference count is zero which means the stripe must
         * be on a list (sh->lru). Must remove the stripe from the list that
         * references it with the device_lock held.
         */

        spin_lock(&conf->device_lock);
        if (!atomic_read(&sh->count)) {
                if (!test_bit(STRIPE_HANDLE, &sh->state))
                        atomic_inc(&conf->active_stripes);
                BUG_ON(list_empty(&sh->lru) &&
                       !test_bit(STRIPE_EXPANDING, &sh->state));
                inc_empty_inactive_list_flag = 0;
                if (!list_empty(conf->inactive_list + hash))
                        inc_empty_inactive_list_flag = 1;
                list_del_init(&sh->lru);
                if (list_empty(conf->inactive_list + hash) &&
                    inc_empty_inactive_list_flag)
                        atomic_inc(&conf->empty_inactive_list_nr);
                if (sh->group) {
                        sh->group->stripes_cnt--;
                        sh->group = NULL;
                }
        }
        atomic_inc(&sh->count);
        spin_unlock(&conf->device_lock);

        return sh;
}

/*
 * Need to check if array has failed when deciding whether to:
 *  - start an array
 *  - remove non-faulty devices
 *  - add a spare
 *  - allow a reshape
 * This determination is simple when no reshape is happening.
 * However if there is a reshape, we need to carefully check
 * both the before and after sections.
 * This is because some failed devices may only affect one
 * of the two sections, and some non-in_sync devices may
 * be insync in the section most affected by failed devices.
 *
 * Most calls to this function hold &conf->device_lock. Calls
 * in raid5_run() do not require the lock as no other threads
 * have been started yet.
 */
int raid5_calc_degraded(struct r5conf *conf)
{
        int degraded, degraded2;
        int i;

        degraded = 0;
        for (i = 0; i < conf->previous_raid_disks; i++) {
                struct md_rdev *rdev = READ_ONCE(conf->disks[i].rdev);

                if (rdev && test_bit(Faulty, &rdev->flags))
                        rdev = READ_ONCE(conf->disks[i].replacement);
                if (!rdev || test_bit(Faulty, &rdev->flags))
                        degraded++;
                else if (test_bit(In_sync, &rdev->flags))
                        ;
                else
                        /* not in-sync or faulty.
                         * If the reshape increases the number of devices,
                         * this is being recovered by the reshape, so
                         * this 'previous' section is not in_sync.
                         * If the number of devices is being reduced however,
                         * the device can only be part of the array if
                         * we are reverting a reshape, so this section will
                         * be in-sync.
                         */
                        if (conf->raid_disks >= conf->previous_raid_disks)
                                degraded++;
        }
        if (conf->raid_disks == conf->previous_raid_disks)
                return degraded;
        degraded2 = 0;
        for (i = 0; i < conf->raid_disks; i++) {
                struct md_rdev *rdev = READ_ONCE(conf->disks[i].rdev);

                if (rdev && test_bit(Faulty, &rdev->flags))
                        rdev = READ_ONCE(conf->disks[i].replacement);
                if (!rdev || test_bit(Faulty, &rdev->flags))
                        degraded2++;
                else if (test_bit(In_sync, &rdev->flags))
                        ;
                else
                        /* not in-sync or faulty.
                         * If reshape increases the number of devices, this
                         * section has already been recovered, else it
                         * almost certainly hasn't.
                         */
                        if (conf->raid_disks <= conf->previous_raid_disks)
                                degraded2++;
        }
        if (degraded2 > degraded)
                return degraded2;
        return degraded;
}

static bool has_failed(struct r5conf *conf)
{
        int degraded = conf->mddev->degraded;

        if (test_bit(MD_BROKEN, &conf->mddev->flags))
                return true;

        if (conf->mddev->reshape_position != MaxSector)
                degraded = raid5_calc_degraded(conf);

        return degraded > conf->max_degraded;
}

enum stripe_result {
        STRIPE_SUCCESS = 0,
        STRIPE_RETRY,
        STRIPE_SCHEDULE_AND_RETRY,
        STRIPE_FAIL,
        STRIPE_WAIT_RESHAPE,
};

struct stripe_request_ctx {
        /* a reference to the last stripe_head for batching */
        struct stripe_head *batch_last;

        /* first sector in the request */
        sector_t first_sector;

        /* last sector in the request */
        sector_t last_sector;

        /* the request had REQ_PREFLUSH, cleared after the first stripe_head */
        bool do_flush;

        /*
         * bitmap to track stripe sectors that have been added to stripes
         * add one to account for unaligned requests
         */
        unsigned long sectors_to_do[];
};

/*
 * Block until another thread clears R5_INACTIVE_BLOCKED or
 * there are fewer than 3/4 the maximum number of active stripes
 * and there is an inactive stripe available.
 */
static bool is_inactive_blocked(struct r5conf *conf, int hash)
{
        if (list_empty(conf->inactive_list + hash))
                return false;

        if (!test_bit(R5_INACTIVE_BLOCKED, &conf->cache_state))
                return true;

        return (atomic_read(&conf->active_stripes) <
                (conf->max_nr_stripes * 3 / 4));
}

struct stripe_head *raid5_get_active_stripe(struct r5conf *conf,
                struct stripe_request_ctx *ctx, sector_t sector,
                unsigned int flags)
{
        struct stripe_head *sh;
        int hash = stripe_hash_locks_hash(conf, sector);
        int previous = !!(flags & R5_GAS_PREVIOUS);

        pr_debug("get_stripe, sector %llu\n", (unsigned long long)sector);

        spin_lock_irq(conf->hash_locks + hash);

        for (;;) {
                if (!(flags & R5_GAS_NOQUIESCE) && conf->quiesce) {
                        /*
                         * Must release the reference to batch_last before
                         * waiting, on quiesce, otherwise the batch_last will
                         * hold a reference to a stripe and raid5_quiesce()
                         * will deadlock waiting for active_stripes to go to
                         * zero.
                         */
                        if (ctx && ctx->batch_last) {
                                raid5_release_stripe(ctx->batch_last);
                                ctx->batch_last = NULL;
                        }

                        wait_event_lock_irq(conf->wait_for_quiescent,
                                            !conf->quiesce,
                                            *(conf->hash_locks + hash));
                }

                sh = find_get_stripe(conf, sector, conf->generation - previous,
                                     hash);
                if (sh)
                        break;

                if (!test_bit(R5_INACTIVE_BLOCKED, &conf->cache_state)) {
                        sh = get_free_stripe(conf, hash);
                        if (sh) {
                                r5c_check_stripe_cache_usage(conf);
                                init_stripe(sh, sector, previous);
                                atomic_inc(&sh->count);
                                break;
                        }

                        if (!test_bit(R5_DID_ALLOC, &conf->cache_state))
                                set_bit(R5_ALLOC_MORE, &conf->cache_state);
                }

                if (flags & R5_GAS_NOBLOCK)
                        break;

                set_bit(R5_INACTIVE_BLOCKED, &conf->cache_state);
                r5l_wake_reclaim(conf->log, 0);

                /* release batch_last before wait to avoid risk of deadlock */
                if (ctx && ctx->batch_last) {
                        raid5_release_stripe(ctx->batch_last);
                        ctx->batch_last = NULL;
                }

                wait_event_lock_irq(conf->wait_for_stripe,
                                    is_inactive_blocked(conf, hash),
                                    *(conf->hash_locks + hash));
                clear_bit(R5_INACTIVE_BLOCKED, &conf->cache_state);
        }

        spin_unlock_irq(conf->hash_locks + hash);
        return sh;
}

static bool is_full_stripe_write(struct stripe_head *sh)
{
        BUG_ON(sh->overwrite_disks > (sh->disks - sh->raid_conf->max_degraded));
        return sh->overwrite_disks == (sh->disks - sh->raid_conf->max_degraded);
}

static void lock_two_stripes(struct stripe_head *sh1, struct stripe_head *sh2)
                __acquires(&sh1->stripe_lock)
                __acquires(&sh2->stripe_lock)
{
        if (sh1 > sh2) {
                spin_lock_irq(&sh2->stripe_lock);
                spin_lock_nested(&sh1->stripe_lock, 1);
        } else {
                spin_lock_irq(&sh1->stripe_lock);
                spin_lock_nested(&sh2->stripe_lock, 1);
        }
}

static void unlock_two_stripes(struct stripe_head *sh1, struct stripe_head *sh2)
                __releases(&sh1->stripe_lock)
                __releases(&sh2->stripe_lock)
{
        spin_unlock(&sh1->stripe_lock);
        spin_unlock_irq(&sh2->stripe_lock);
}

/* Only freshly new full stripe normal write stripe can be added to a batch list */
static bool stripe_can_batch(struct stripe_head *sh)
{
        struct r5conf *conf = sh->raid_conf;

        if (raid5_has_log(conf) || raid5_has_ppl(conf))
                return false;
        return test_bit(STRIPE_BATCH_READY, &sh->state) &&
               is_full_stripe_write(sh);
}

/* we only do back search */
static void stripe_add_to_batch_list(struct r5conf *conf,
                struct stripe_head *sh, struct stripe_head *last_sh)
{
        struct stripe_head *head;
        sector_t head_sector, tmp_sec;
        int hash;
        int dd_idx;

        /* Don't cross chunks, so stripe pd_idx/qd_idx is the same */
        tmp_sec = sh->sector;
        if (!sector_div(tmp_sec, conf->chunk_sectors))
                return;
        head_sector = sh->sector - RAID5_STRIPE_SECTORS(conf);

        if (last_sh && head_sector == last_sh->sector) {
                head = last_sh;
                atomic_inc(&head->count);
        } else {
                hash = stripe_hash_locks_hash(conf, head_sector);
                spin_lock_irq(conf->hash_locks + hash);
                head = find_get_stripe(conf, head_sector, conf->generation,
                                       hash);
                spin_unlock_irq(conf->hash_locks + hash);
                if (!head)
                        return;
                if (!stripe_can_batch(head))
                        goto out;
        }

        lock_two_stripes(head, sh);
        /* clear_batch_ready clear the flag */
        if (!stripe_can_batch(head) || !stripe_can_batch(sh))
                goto unlock_out;

        if (sh->batch_head)
                goto unlock_out;

        dd_idx = 0;
        while (dd_idx == sh->pd_idx || dd_idx == sh->qd_idx)
                dd_idx++;
        if (head->dev[dd_idx].towrite->bi_opf != sh->dev[dd_idx].towrite->bi_opf ||
            bio_op(head->dev[dd_idx].towrite) != bio_op(sh->dev[dd_idx].towrite))
                goto unlock_out;

        if (head->batch_head) {
                spin_lock(&head->batch_head->batch_lock);
                /* This batch list is already running */
                if (!stripe_can_batch(head)) {
                        spin_unlock(&head->batch_head->batch_lock);
                        goto unlock_out;
                }
                /*
                 * We must assign batch_head of this stripe within the
                 * batch_lock, otherwise clear_batch_ready of batch head
                 * stripe could clear BATCH_READY bit of this stripe and
                 * this stripe->batch_head doesn't get assigned, which
                 * could confuse clear_batch_ready for this stripe
                 */
                sh->batch_head = head->batch_head;

                /*
                 * at this point, head's BATCH_READY could be cleared, but we
                 * can still add the stripe to batch list
                 */
                list_add(&sh->batch_list, &head->batch_list);
                spin_unlock(&head->batch_head->batch_lock);
        } else {
                head->batch_head = head;
                sh->batch_head = head->batch_head;
                spin_lock(&head->batch_lock);
                list_add_tail(&sh->batch_list, &head->batch_list);
                spin_unlock(&head->batch_lock);
        }

        if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
                if (atomic_dec_return(&conf->preread_active_stripes)
                    < IO_THRESHOLD)
                        md_wakeup_thread(conf->mddev->thread);

        if (test_and_clear_bit(STRIPE_BIT_DELAY, &sh->state)) {
                int seq = sh->bm_seq;
                if (test_bit(STRIPE_BIT_DELAY, &sh->batch_head->state) &&
                    sh->batch_head->bm_seq > seq)
                        seq = sh->batch_head->bm_seq;
                set_bit(STRIPE_BIT_DELAY, &sh->batch_head->state);
                sh->batch_head->bm_seq = seq;
        }

        atomic_inc(&sh->count);
unlock_out:
        unlock_two_stripes(head, sh);
out:
        raid5_release_stripe(head);
}

/* Determine if 'data_offset' or 'new_data_offset' should be used
 * in this stripe_head.
 */
static int use_new_offset(struct r5conf *conf, struct stripe_head *sh)
{
        sector_t progress = conf->reshape_progress;
        /* Need a memory barrier to make sure we see the value
         * of conf->generation, or ->data_offset that was set before
         * reshape_progress was updated.
         */
        smp_rmb();
        if (progress == MaxSector)
                return 0;
        if (sh->generation == conf->generation - 1)
                return 0;
        /* We are in a reshape, and this is a new-generation stripe,
         * so use new_data_offset.
         */
        return 1;
}

static void dispatch_bio_list(struct bio_list *tmp)
{
        struct bio *bio;

        while ((bio = bio_list_pop(tmp)))
                submit_bio_noacct(bio);
}

static int cmp_stripe(void *priv, const struct list_head *a,
                      const struct list_head *b)
{
        const struct r5pending_data *da = list_entry(a,
                                struct r5pending_data, sibling);
        const struct r5pending_data *db = list_entry(b,
                                struct r5pending_data, sibling);
        if (da->sector > db->sector)
                return 1;
        if (da->sector < db->sector)
                return -1;
        return 0;
}

static void dispatch_defer_bios(struct r5conf *conf, int target,
                                struct bio_list *list)
{
        struct r5pending_data *data;
        struct list_head *first, *next = NULL;
        int cnt = 0;

        if (conf->pending_data_cnt == 0)
                return;

        list_sort(NULL, &conf->pending_list, cmp_stripe);

        first = conf->pending_list.next;

        /* temporarily move the head */
        if (conf->next_pending_data)
                list_move_tail(&conf->pending_list,
                                &conf->next_pending_data->sibling);

        while (!list_empty(&conf->pending_list)) {
                data = list_first_entry(&conf->pending_list,
                        struct r5pending_data, sibling);
                if (&data->sibling == first)
                        first = data->sibling.next;
                next = data->sibling.next;

                bio_list_merge(list, &data->bios);
                list_move(&data->sibling, &conf->free_list);
                cnt++;
                if (cnt >= target)
                        break;
        }
        conf->pending_data_cnt -= cnt;
        BUG_ON(conf->pending_data_cnt < 0 || cnt < target);

        if (next != &conf->pending_list)
                conf->next_pending_data = list_entry(next,
                                struct r5pending_data, sibling);
        else
                conf->next_pending_data = NULL;
        /* list isn't empty */
        if (first != &conf->pending_list)
                list_move_tail(&conf->pending_list, first);
}

static void flush_deferred_bios(struct r5conf *conf)
{
        struct bio_list tmp = BIO_EMPTY_LIST;

        if (conf->pending_data_cnt == 0)
                return;

        spin_lock(&conf->pending_bios_lock);
        dispatch_defer_bios(conf, conf->pending_data_cnt, &tmp);
        BUG_ON(conf->pending_data_cnt != 0);
        spin_unlock(&conf->pending_bios_lock);

        dispatch_bio_list(&tmp);
}

static void defer_issue_bios(struct r5conf *conf, sector_t sector,
                                struct bio_list *bios)
{
        struct bio_list tmp = BIO_EMPTY_LIST;
        struct r5pending_data *ent;

        spin_lock(&conf->pending_bios_lock);
        ent = list_first_entry(&conf->free_list, struct r5pending_data,
                                                        sibling);
        list_move_tail(&ent->sibling, &conf->pending_list);
        ent->sector = sector;
        bio_list_init(&ent->bios);
        bio_list_merge(&ent->bios, bios);
        conf->pending_data_cnt++;
        if (conf->pending_data_cnt >= PENDING_IO_MAX)
                dispatch_defer_bios(conf, PENDING_IO_ONE_FLUSH, &tmp);

        spin_unlock(&conf->pending_bios_lock);

        dispatch_bio_list(&tmp);
}

static void
raid5_end_read_request(struct bio *bi);
static void
raid5_end_write_request(struct bio *bi);

static void ops_run_io(struct stripe_head *sh, struct stripe_head_state *s)
{
        struct r5conf *conf = sh->raid_conf;
        int i, disks = sh->disks;
        struct stripe_head *head_sh = sh;
        struct bio_list pending_bios = BIO_EMPTY_LIST;
        struct r5dev *dev;
        bool should_defer;

        might_sleep();

        if (log_stripe(sh, s) == 0)
                return;

        should_defer = conf->batch_bio_dispatch && conf->group_cnt;

        for (i = disks; i--; ) {
                enum req_op op;
                blk_opf_t op_flags = 0;
                int replace_only = 0;
                struct bio *bi, *rbi;
                struct md_rdev *rdev, *rrdev = NULL;

                sh = head_sh;
                if (test_and_clear_bit(R5_Wantwrite, &sh->dev[i].flags)) {
                        op = REQ_OP_WRITE;
                        if (test_and_clear_bit(R5_WantFUA, &sh->dev[i].flags))
                                op_flags = REQ_FUA;
                        if (test_bit(R5_Discard, &sh->dev[i].flags))
                                op = REQ_OP_DISCARD;
                } else if (test_and_clear_bit(R5_Wantread, &sh->dev[i].flags))
                        op = REQ_OP_READ;
                else if (test_and_clear_bit(R5_WantReplace,
                                            &sh->dev[i].flags)) {
                        op = REQ_OP_WRITE;
                        replace_only = 1;
                } else
                        continue;
                if (test_and_clear_bit(R5_SyncIO, &sh->dev[i].flags))
                        op_flags |= REQ_SYNC;

again:
                dev = &sh->dev[i];
                bi = &dev->req;
                rbi = &dev->rreq; /* For writing to replacement */

                rdev = conf->disks[i].rdev;
                rrdev = conf->disks[i].replacement;
                if (op_is_write(op)) {
                        if (replace_only)
                                rdev = NULL;
                        if (rdev == rrdev)
                                /* We raced and saw duplicates */
                                rrdev = NULL;
                } else {
                        if (test_bit(R5_ReadRepl, &head_sh->dev[i].flags) && rrdev)
                                rdev = rrdev;
                        rrdev = NULL;
                }

                if (rdev && test_bit(Faulty, &rdev->flags))
                        rdev = NULL;
                if (rdev)
                        atomic_inc(&rdev->nr_pending);
                if (rrdev && test_bit(Faulty, &rrdev->flags))
                        rrdev = NULL;
                if (rrdev)
                        atomic_inc(&rrdev->nr_pending);

                /* We have already checked bad blocks for reads.  Now
                 * need to check for writes.  We never accept write errors
                 * on the replacement, so we don't to check rrdev.
                 */
                while (op_is_write(op) && rdev &&
                       test_bit(WriteErrorSeen, &rdev->flags)) {
                        int bad = rdev_has_badblock(rdev, sh->sector,
                                                    RAID5_STRIPE_SECTORS(conf));
                        if (!bad)
                                break;

                        if (bad < 0) {
                                set_bit(BlockedBadBlocks, &rdev->flags);
                                if (!conf->mddev->external &&
                                    conf->mddev->sb_flags) {
                                        /* It is very unlikely, but we might
                                         * still need to write out the
                                         * bad block log - better give it
                                         * a chance*/
                                        md_check_recovery(conf->mddev);
                                }
                                /*
                                 * Because md_wait_for_blocked_rdev
                                 * will dec nr_pending, we must
                                 * increment it first.
                                 */
                                atomic_inc(&rdev->nr_pending);
                                md_wait_for_blocked_rdev(rdev, conf->mddev);
                        } else {
                                /* Acknowledged bad block - skip the write */
                                rdev_dec_pending(rdev, conf->mddev);
                                rdev = NULL;
                        }
                }

                if (rdev) {
                        set_bit(STRIPE_IO_STARTED, &sh->state);

                        bio_init(bi, rdev->bdev, &dev->vec, 1, op | op_flags);
                        bi->bi_end_io = op_is_write(op)
                                ? raid5_end_write_request
                                : raid5_end_read_request;
                        bi->bi_private = sh;

                        pr_debug("%s: for %llu schedule op %d on disc %d\n",
                                __func__, (unsigned long long)sh->sector,
                                bi->bi_opf, i);
                        atomic_inc(&sh->count);
                        if (sh != head_sh)
                                atomic_inc(&head_sh->count);
                        if (use_new_offset(conf, sh))
                                bi->bi_iter.bi_sector = (sh->sector
                                                 + rdev->new_data_offset);
                        else
                                bi->bi_iter.bi_sector = (sh->sector
                                                 + rdev->data_offset);
                        if (test_bit(R5_ReadNoMerge, &head_sh->dev[i].flags))
                                bi->bi_opf |= REQ_NOMERGE;

                        if (test_bit(R5_SkipCopy, &sh->dev[i].flags))
                                WARN_ON(test_bit(R5_UPTODATE, &sh->dev[i].flags));

                        if (!op_is_write(op) &&
                            test_bit(R5_InJournal, &sh->dev[i].flags))
                                /*
                                 * issuing read for a page in journal, this
                                 * must be preparing for prexor in rmw; read
                                 * the data into orig_page
                                 */
                                sh->dev[i].vec.bv_page = sh->dev[i].orig_page;
                        else
                                sh->dev[i].vec.bv_page = sh->dev[i].page;
                        bi->bi_vcnt = 1;
                        bi->bi_io_vec[0].bv_len = RAID5_STRIPE_SIZE(conf);
                        bi->bi_io_vec[0].bv_offset = sh->dev[i].offset;
                        bi->bi_iter.bi_size = RAID5_STRIPE_SIZE(conf);
                        /*
                         * If this is discard request, set bi_vcnt 0. We don't
                         * want to confuse SCSI because SCSI will replace payload
                         */
                        if (op == REQ_OP_DISCARD)
                                bi->bi_vcnt = 0;
                        if (rrdev)
                                set_bit(R5_DOUBLE_LOCKED, &sh->dev[i].flags);

                        mddev_trace_remap(conf->mddev, bi, sh->dev[i].sector);
                        if (should_defer && op_is_write(op))
                                bio_list_add(&pending_bios, bi);
                        else
                                submit_bio_noacct(bi);
                }
                if (rrdev) {
                        set_bit(STRIPE_IO_STARTED, &sh->state);

                        bio_init(rbi, rrdev->bdev, &dev->rvec, 1, op | op_flags);
                        BUG_ON(!op_is_write(op));
                        rbi->bi_end_io = raid5_end_write_request;
                        rbi->bi_private = sh;

                        pr_debug("%s: for %llu schedule op %d on "
                                 "replacement disc %d\n",
                                __func__, (unsigned long long)sh->sector,
                                rbi->bi_opf, i);
                        atomic_inc(&sh->count);
                        if (sh != head_sh)
                                atomic_inc(&head_sh->count);
                        if (use_new_offset(conf, sh))
                                rbi->bi_iter.bi_sector = (sh->sector
                                                  + rrdev->new_data_offset);
                        else
                                rbi->bi_iter.bi_sector = (sh->sector
                                                  + rrdev->data_offset);
                        if (test_bit(R5_SkipCopy, &sh->dev[i].flags))
                                WARN_ON(test_bit(R5_UPTODATE, &sh->dev[i].flags));
                        sh->dev[i].rvec.bv_page = sh->dev[i].page;
                        rbi->bi_vcnt = 1;
                        rbi->bi_io_vec[0].bv_len = RAID5_STRIPE_SIZE(conf);
                        rbi->bi_io_vec[0].bv_offset = sh->dev[i].offset;
                        rbi->bi_iter.bi_size = RAID5_STRIPE_SIZE(conf);
                        /*
                         * If this is discard request, set bi_vcnt 0. We don't
                         * want to confuse SCSI because SCSI will replace payload
                         */
                        if (op == REQ_OP_DISCARD)
                                rbi->bi_vcnt = 0;
                        mddev_trace_remap(conf->mddev, rbi, sh->dev[i].sector);
                        if (should_defer && op_is_write(op))
                                bio_list_add(&pending_bios, rbi);
                        else
                                submit_bio_noacct(rbi);
                }
                if (!rdev && !rrdev) {
                        pr_debug("skip op %d on disc %d for sector %llu\n",
                                bi->bi_opf, i, (unsigned long long)sh->sector);
                        clear_bit(R5_LOCKED, &sh->dev[i].flags);
                        set_bit(STRIPE_HANDLE, &sh->state);
                }

                if (!head_sh->batch_head)
                        continue;
                sh = list_first_entry(&sh->batch_list, struct stripe_head,
                                      batch_list);
                if (sh != head_sh)
                        goto again;
        }

        if (should_defer && !bio_list_empty(&pending_bios))
                defer_issue_bios(conf, head_sh->sector, &pending_bios);
}

static struct dma_async_tx_descriptor *
async_copy_data(int frombio, struct bio *bio, struct page **page,
        unsigned int poff, sector_t sector, struct dma_async_tx_descriptor *tx,
        struct stripe_head *sh, int no_skipcopy)
{
        struct bio_vec bvl;
        struct bvec_iter iter;
        struct page *bio_page;
        int page_offset;
        struct async_submit_ctl submit;
        enum async_tx_flags flags = 0;
        struct r5conf *conf = sh->raid_conf;

        if (bio->bi_iter.bi_sector >= sector)
                page_offset = (signed)(bio->bi_iter.bi_sector - sector) * 512;
        else
                page_offset = (signed)(sector - bio->bi_iter.bi_sector) * -512;

        if (frombio)
                flags |= ASYNC_TX_FENCE;
        init_async_submit(&submit, flags, tx, NULL, NULL, NULL);

        bio_for_each_segment(bvl, bio, iter) {
                int len = bvl.bv_len;
                int clen;
                int b_offset = 0;

                if (page_offset < 0) {
                        b_offset = -page_offset;
                        page_offset += b_offset;
                        len -= b_offset;
                }

                if (len > 0 && page_offset + len > RAID5_STRIPE_SIZE(conf))
                        clen = RAID5_STRIPE_SIZE(conf) - page_offset;
                else
                        clen = len;

                if (clen > 0) {
                        b_offset += bvl.bv_offset;
                        bio_page = bvl.bv_page;
                        if (frombio) {
                                if (conf->skip_copy &&
                                    b_offset == 0 && page_offset == 0 &&
                                    clen == RAID5_STRIPE_SIZE(conf) &&
                                    !no_skipcopy)
                                        *page = bio_page;
                                else
                                        tx = async_memcpy(*page, bio_page, page_offset + poff,
                                                  b_offset, clen, &submit);
                        } else
                                tx = async_memcpy(bio_page, *page, b_offset,
                                                  page_offset + poff, clen, &submit);
                }
                /* chain the operations */
                submit.depend_tx = tx;

                if (clen < len) /* hit end of page */
                        break;
                page_offset +=  len;
        }

        return tx;
}

static void ops_complete_biofill(void *stripe_head_ref)
{
        struct stripe_head *sh = stripe_head_ref;
        int i;
        struct r5conf *conf = sh->raid_conf;

        pr_debug("%s: stripe %llu\n", __func__,
                (unsigned long long)sh->sector);

        /* clear completed biofills */
        for (i = sh->disks; i--; ) {
                struct r5dev *dev = &sh->dev[i];

                /* acknowledge completion of a biofill operation */
                /* and check if we need to reply to a read request,
                 * new R5_Wantfill requests are held off until
                 * !STRIPE_BIOFILL_RUN
                 */
                if (test_and_clear_bit(R5_Wantfill, &dev->flags)) {
                        struct bio *rbi, *rbi2;

                        BUG_ON(!dev->read);
                        rbi = dev->read;
                        dev->read = NULL;
                        while (rbi && rbi->bi_iter.bi_sector <
                                dev->sector + RAID5_STRIPE_SECTORS(conf)) {
                                rbi2 = r5_next_bio(conf, rbi, dev->sector);
                                bio_endio(rbi);
                                rbi = rbi2;
                        }
                }
        }
        clear_bit(STRIPE_BIOFILL_RUN, &sh->state);

        set_bit(STRIPE_HANDLE, &sh->state);
        raid5_release_stripe(sh);
}

static void ops_run_biofill(struct stripe_head *sh)
{
        struct dma_async_tx_descriptor *tx = NULL;
        struct async_submit_ctl submit;
        int i;
        struct r5conf *conf = sh->raid_conf;

        BUG_ON(sh->batch_head);
        pr_debug("%s: stripe %llu\n", __func__,
                (unsigned long long)sh->sector);

        for (i = sh->disks; i--; ) {
                struct r5dev *dev = &sh->dev[i];
                if (test_bit(R5_Wantfill, &dev->flags)) {
                        struct bio *rbi;
                        spin_lock_irq(&sh->stripe_lock);
                        dev->read = rbi = dev->toread;
                        dev->toread = NULL;
                        spin_unlock_irq(&sh->stripe_lock);
                        while (rbi && rbi->bi_iter.bi_sector <
                                dev->sector + RAID5_STRIPE_SECTORS(conf)) {
                                tx = async_copy_data(0, rbi, &dev->page,
                                                     dev->offset,
                                                     dev->sector, tx, sh, 0);
                                rbi = r5_next_bio(conf, rbi, dev->sector);
                        }
                }
        }

        atomic_inc(&sh->count);
        init_async_submit(&submit, ASYNC_TX_ACK, tx, ops_complete_biofill, sh, NULL);
        async_trigger_callback(&submit);
}

static void mark_target_uptodate(struct stripe_head *sh, int target)
{
        struct r5dev *tgt;

        if (target < 0)
                return;

        tgt = &sh->dev[target];
        set_bit(R5_UPTODATE, &tgt->flags);
        BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
        clear_bit(R5_Wantcompute, &tgt->flags);
}

static void ops_complete_compute(void *stripe_head_ref)
{
        struct stripe_head *sh = stripe_head_ref;

        pr_debug("%s: stripe %llu\n", __func__,
                (unsigned long long)sh->sector);

        /* mark the computed target(s) as uptodate */
        mark_target_uptodate(sh, sh->ops.target);
        mark_target_uptodate(sh, sh->ops.target2);

        clear_bit(STRIPE_COMPUTE_RUN, &sh->state);
        if (sh->check_state == check_state_compute_run)
                sh->check_state = check_state_compute_result;
        set_bit(STRIPE_HANDLE, &sh->state);
        raid5_release_stripe(sh);
}

/* return a pointer to the address conversion region of the scribble buffer */
static struct page **to_addr_page(struct raid5_percpu *percpu, int i)
{
        return percpu->scribble + i * percpu->scribble_obj_size;
}

/* return a pointer to the address conversion region of the scribble buffer */
static addr_conv_t *to_addr_conv(struct stripe_head *sh,
                                 struct raid5_percpu *percpu, int i)
{
        return (void *) (to_addr_page(percpu, i) + sh->disks + 2);
}

/*
 * Return a pointer to record offset address.
 */
static unsigned int *
to_addr_offs(struct stripe_head *sh, struct raid5_percpu *percpu)
{
        return (unsigned int *) (to_addr_conv(sh, percpu, 0) + sh->disks + 2);
}

static struct dma_async_tx_descriptor *
ops_run_compute5(struct stripe_head *sh, struct raid5_percpu *percpu)
{
        int disks = sh->disks;
        struct page **xor_srcs = to_addr_page(percpu, 0);
        unsigned int *off_srcs = to_addr_offs(sh, percpu);
        int target = sh->ops.target;
        struct r5dev *tgt = &sh->dev[target];
        struct page *xor_dest = tgt->page;
        unsigned int off_dest = tgt->offset;
        int count = 0;
        struct dma_async_tx_descriptor *tx;
        struct async_submit_ctl submit;
        int i;

        BUG_ON(sh->batch_head);

        pr_debug("%s: stripe %llu block: %d\n",
                __func__, (unsigned long long)sh->sector, target);
        BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));

        for (i = disks; i--; ) {
                if (i != target) {
                        off_srcs[count] = sh->dev[i].offset;
                        xor_srcs[count++] = sh->dev[i].page;
                }
        }

        atomic_inc(&sh->count);

        init_async_submit(&submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_ZERO_DST, NULL,
                          ops_complete_compute, sh, to_addr_conv(sh, percpu, 0));
        if (unlikely(count == 1))
                tx = async_memcpy(xor_dest, xor_srcs[0], off_dest, off_srcs[0],
                                RAID5_STRIPE_SIZE(sh->raid_conf), &submit);
        else
                tx = async_xor_offs(xor_dest, off_dest, xor_srcs, off_srcs, count,
                                RAID5_STRIPE_SIZE(sh->raid_conf), &submit);

        return tx;
}

/* set_syndrome_sources - populate source buffers for gen_syndrome
 * @srcs - (struct page *) array of size sh->disks
 * @offs - (unsigned int) array of offset for each page
 * @sh - stripe_head to parse
 *
 * Populates srcs in proper layout order for the stripe and returns the
 * 'count' of sources to be used in a call to async_gen_syndrome.  The P
 * destination buffer is recorded in srcs[count] and the Q destination
 * is recorded in srcs[count+1]].
 */
static int set_syndrome_sources(struct page **srcs,
                                unsigned int *offs,
                                struct stripe_head *sh,
                                int srctype)
{
        int disks = sh->disks;
        int syndrome_disks = sh->ddf_layout ? disks : (disks - 2);
        int d0_idx = raid6_d0(sh);
        int count;
        int i;

        for (i = 0; i < disks; i++)
                srcs[i] = NULL;

        count = 0;
        i = d0_idx;
        do {
                int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);
                struct r5dev *dev = &sh->dev[i];

                if (i == sh->qd_idx || i == sh->pd_idx ||
                    (srctype == SYNDROME_SRC_ALL) ||
                    (srctype == SYNDROME_SRC_WANT_DRAIN &&
                     (test_bit(R5_Wantdrain, &dev->flags) ||
                      test_bit(R5_InJournal, &dev->flags))) ||
                    (srctype == SYNDROME_SRC_WRITTEN &&
                     (dev->written ||
                      test_bit(R5_InJournal, &dev->flags)))) {
                        if (test_bit(R5_InJournal, &dev->flags))
                                srcs[slot] = sh->dev[i].orig_page;
                        else
                                srcs[slot] = sh->dev[i].page;
                        /*
                         * For R5_InJournal, PAGE_SIZE must be 4KB and will
                         * not shared page. In that case, dev[i].offset
                         * is 0.
                         */
                        offs[slot] = sh->dev[i].offset;
                }
                i = raid6_next_disk(i, disks);
        } while (i != d0_idx);

        return syndrome_disks;
}

static struct dma_async_tx_descriptor *
ops_run_compute6_1(struct stripe_head *sh, struct raid5_percpu *percpu)
{
        int disks = sh->disks;
        struct page **blocks = to_addr_page(percpu, 0);
        unsigned int *offs = to_addr_offs(sh, percpu);
        int target;
        int qd_idx = sh->qd_idx;
        struct dma_async_tx_descriptor *tx;
        struct async_submit_ctl submit;
        struct r5dev *tgt;
        struct page *dest;
        unsigned int dest_off;
        int i;
        int count;

        BUG_ON(sh->batch_head);
        if (sh->ops.target < 0)
                target = sh->ops.target2;
        else if (sh->ops.target2 < 0)
                target = sh->ops.target;
        else
                /* we should only have one valid target */
                BUG();
        BUG_ON(target < 0);
        pr_debug("%s: stripe %llu block: %d\n",
                __func__, (unsigned long long)sh->sector, target);

        tgt = &sh->dev[target];
        BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
        dest = tgt->page;
        dest_off = tgt->offset;

        atomic_inc(&sh->count);

        if (target == qd_idx) {
                count = set_syndrome_sources(blocks, offs, sh, SYNDROME_SRC_ALL);
                blocks[count] = NULL; /* regenerating p is not necessary */
                BUG_ON(blocks[count+1] != dest); /* q should already be set */
                init_async_submit(&submit, ASYNC_TX_FENCE, NULL,
                                  ops_complete_compute, sh,
                                  to_addr_conv(sh, percpu, 0));
                tx = async_gen_syndrome(blocks, offs, count+2,
                                RAID5_STRIPE_SIZE(sh->raid_conf), &submit);
        } else {
                /* Compute any data- or p-drive using XOR */
                count = 0;
                for (i = disks; i-- ; ) {
                        if (i == target || i == qd_idx)
                                continue;
                        offs[count] = sh->dev[i].offset;
                        blocks[count++] = sh->dev[i].page;
                }

                init_async_submit(&submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_ZERO_DST,
                                  NULL, ops_complete_compute, sh,
                                  to_addr_conv(sh, percpu, 0));
                tx = async_xor_offs(dest, dest_off, blocks, offs, count,
                                RAID5_STRIPE_SIZE(sh->raid_conf), &submit);
        }

        return tx;
}

static struct dma_async_tx_descriptor *
ops_run_compute6_2(struct stripe_head *sh, struct raid5_percpu *percpu)
{
        int i, count, disks = sh->disks;
        int syndrome_disks = sh->ddf_layout ? disks : disks-2;
        int d0_idx = raid6_d0(sh);
        int faila = -1, failb = -1;
        int target = sh->ops.target;
        int target2 = sh->ops.target2;
        struct r5dev *tgt = &sh->dev[target];
        struct r5dev *tgt2 = &sh->dev[target2];
        struct dma_async_tx_descriptor *tx;
        struct page **blocks = to_addr_page(percpu, 0);
        unsigned int *offs = to_addr_offs(sh, percpu);
        struct async_submit_ctl submit;

        BUG_ON(sh->batch_head);
        pr_debug("%s: stripe %llu block1: %d block2: %d\n",
                 __func__, (unsigned long long)sh->sector, target, target2);
        BUG_ON(target < 0 || target2 < 0);
        BUG_ON(!test_bit(R5_Wantcompute, &tgt->flags));
        BUG_ON(!test_bit(R5_Wantcompute, &tgt2->flags));

        /* we need to open-code set_syndrome_sources to handle the
         * slot number conversion for 'faila' and 'failb'
         */
        for (i = 0; i < disks ; i++) {
                offs[i] = 0;
                blocks[i] = NULL;
        }
        count = 0;
        i = d0_idx;
        do {
                int slot = raid6_idx_to_slot(i, sh, &count, syndrome_disks);

                offs[slot] = sh->dev[i].offset;
                blocks[slot] = sh->dev[i].page;

                if (i == target)
                        faila = slot;
                if (i == target2)
                        failb = slot;
                i = raid6_next_disk(i, disks);
        } while (i != d0_idx);

        BUG_ON(faila == failb);
        if (failb < faila)
                swap(faila, failb);
        pr_debug("%s: stripe: %llu faila: %d failb: %d\n",
                 __func__, (unsigned long long)sh->sector, faila, failb);

        atomic_inc(&sh->count);

        if (failb == syndrome_disks+1) {
                /* Q disk is one of the missing disks */
                if (faila == syndrome_disks) {
                        /* Missing P+Q, just recompute */
                        init_async_submit(&submit, ASYNC_TX_FENCE, NULL,
                                          ops_complete_compute, sh,
                                          to_addr_conv(sh, percpu, 0));
                        return async_gen_syndrome(blocks, offs, syndrome_disks+2,
                                                  RAID5_STRIPE_SIZE(sh->raid_conf),
                                                  &submit);
                } else {
                        struct page *dest;
                        unsigned int dest_off;
                        int data_target;
                        int qd_idx = sh->qd_idx;

                        /* Missing D+Q: recompute D from P, then recompute Q */
                        if (target == qd_idx)
                                data_target = target2;
                        else
                                data_target = target;

                        count = 0;
                        for (i = disks; i-- ; ) {
                                if (i == data_target || i == qd_idx)
                                        continue;
                                offs[count] = sh->dev[i].offset;
                                blocks[count++] = sh->dev[i].page;
                        }
                        dest = sh->dev[data_target].page;
                        dest_off = sh->dev[data_target].offset;
                        init_async_submit(&submit,
                                          ASYNC_TX_FENCE|ASYNC_TX_XOR_ZERO_DST,
                                          NULL, NULL, NULL,
                                          to_addr_conv(sh, percpu, 0));
                        tx = async_xor_offs(dest, dest_off, blocks, offs, count,
                                       RAID5_STRIPE_SIZE(sh->raid_conf),
                                       &submit);

                        count = set_syndrome_sources(blocks, offs, sh, SYNDROME_SRC_ALL);
                        init_async_submit(&submit, ASYNC_TX_FENCE, tx,
                                          ops_complete_compute, sh,
                                          to_addr_conv(sh, percpu, 0));
                        return async_gen_syndrome(blocks, offs, count+2,
                                                  RAID5_STRIPE_SIZE(sh->raid_conf),
                                                  &submit);
                }
        } else {
                init_async_submit(&submit, ASYNC_TX_FENCE, NULL,
                                  ops_complete_compute, sh,
                                  to_addr_conv(sh, percpu, 0));
                if (failb == syndrome_disks) {
                        /* We're missing D+P. */
                        return async_raid6_datap_recov(syndrome_disks+2,
                                                RAID5_STRIPE_SIZE(sh->raid_conf),
                                                faila,
                                                blocks, offs, &submit);
                } else {
                        /* We're missing D+D. */
                        return async_raid6_2data_recov(syndrome_disks+2,
                                                RAID5_STRIPE_SIZE(sh->raid_conf),
                                                faila, failb,
                                                blocks, offs, &submit);
                }
        }
}

static void ops_complete_prexor(void *stripe_head_ref)
{
        struct stripe_head *sh = stripe_head_ref;

        pr_debug("%s: stripe %llu\n", __func__,
                (unsigned long long)sh->sector);

        if (r5c_is_writeback(sh->raid_conf->log))
                /*
                 * raid5-cache write back uses orig_page during prexor.
                 * After prexor, it is time to free orig_page
                 */
                r5c_release_extra_page(sh);
}

static struct dma_async_tx_descriptor *
ops_run_prexor5(struct stripe_head *sh, struct raid5_percpu *percpu,
                struct dma_async_tx_descriptor *tx)
{
        int disks = sh->disks;
        struct page **xor_srcs = to_addr_page(percpu, 0);
        unsigned int *off_srcs = to_addr_offs(sh, percpu);
        int count = 0, pd_idx = sh->pd_idx, i;
        struct async_submit_ctl submit;

        /* existing parity data subtracted */
        unsigned int off_dest = off_srcs[count] = sh->dev[pd_idx].offset;
        struct page *xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;

        BUG_ON(sh->batch_head);
        pr_debug("%s: stripe %llu\n", __func__,
                (unsigned long long)sh->sector);

        for (i = disks; i--; ) {
                struct r5dev *dev = &sh->dev[i];
                /* Only process blocks that are known to be uptodate */
                if (test_bit(R5_InJournal, &dev->flags)) {
                        /*
                         * For this case, PAGE_SIZE must be equal to 4KB and
                         * page offset is zero.
                         */
                        off_srcs[count] = dev->offset;
                        xor_srcs[count++] = dev->orig_page;
                } else if (test_bit(R5_Wantdrain, &dev->flags)) {
                        off_srcs[count] = dev->offset;
                        xor_srcs[count++] = dev->page;
                }
        }

        init_async_submit(&submit, ASYNC_TX_FENCE|ASYNC_TX_XOR_DROP_DST, tx,
                          ops_complete_prexor, sh, to_addr_conv(sh, percpu, 0));
        tx = async_xor_offs(xor_dest, off_dest, xor_srcs, off_srcs, count,
                        RAID5_STRIPE_SIZE(sh->raid_conf), &submit);

        return tx;
}

static struct dma_async_tx_descriptor *
ops_run_prexor6(struct stripe_head *sh, struct raid5_percpu *percpu,
                struct dma_async_tx_descriptor *tx)
{
        struct page **blocks = to_addr_page(percpu, 0);
        unsigned int *offs = to_addr_offs(sh, percpu);
        int count;
        struct async_submit_ctl submit;

        pr_debug("%s: stripe %llu\n", __func__,
                (unsigned long long)sh->sector);

        count = set_syndrome_sources(blocks, offs, sh, SYNDROME_SRC_WANT_DRAIN);

        init_async_submit(&submit, ASYNC_TX_FENCE|ASYNC_TX_PQ_XOR_DST, tx,
                          ops_complete_prexor, sh, to_addr_conv(sh, percpu, 0));
        tx = async_gen_syndrome(blocks, offs, count+2,
                        RAID5_STRIPE_SIZE(sh->raid_conf), &submit);

        return tx;
}

static struct dma_async_tx_descriptor *
ops_run_biodrain(struct stripe_head *sh, struct dma_async_tx_descriptor *tx)
{
        struct r5conf *conf = sh->raid_conf;
        int disks = sh->disks;
        int i;
        struct stripe_head *head_sh = sh;

        pr_debug("%s: stripe %llu\n", __func__,
                (unsigned long long)sh->sector);

        for (i = disks; i--; ) {
                struct r5dev *dev;
                struct bio *chosen;

                sh = head_sh;
                if (test_and_clear_bit(R5_Wantdrain, &head_sh->dev[i].flags)) {
                        struct bio *wbi;

again:
                        dev = &sh->dev[i];
                        /*
                         * clear R5_InJournal, so when rewriting a page in
                         * journal, it is not skipped by r5l_log_stripe()
                         */
                        clear_bit(R5_InJournal, &dev->flags);
                        spin_lock_irq(&sh->stripe_lock);
                        chosen = dev->towrite;
                        dev->towrite = NULL;
                        sh->overwrite_disks = 0;
                        BUG_ON(dev->written);
                        wbi = dev->written = chosen;
                        spin_unlock_irq(&sh->stripe_lock);
                        WARN_ON(dev->page != dev->orig_page);

                        while (wbi && wbi->bi_iter.bi_sector <
                                dev->sector + RAID5_STRIPE_SECTORS(conf)) {
                                if (wbi->bi_opf & REQ_FUA)
                                        set_bit(R5_WantFUA, &dev->flags);
                                if (wbi->bi_opf & REQ_SYNC)
                                        set_bit(R5_SyncIO, &dev->flags);
                                if (bio_op(wbi) == REQ_OP_DISCARD)
                                        set_bit(R5_Discard, &dev->flags);
                                else {
                                        tx = async_copy_data(1, wbi, &dev->page,
                                                             dev->offset,
                                                             dev->sector, tx, sh,
                                                             r5c_is_writeback(conf->log));
                                        if (dev->page != dev->orig_page &&
                                            !r5c_is_writeback(conf->log)) {
                                                set_bit(R5_SkipCopy, &dev->flags);
                                                clear_bit(R5_UPTODATE, &dev->flags);
                                                clear_bit(R5_OVERWRITE, &dev->flags);
                                        }
                                }
                                wbi = r5_next_bio(conf, wbi, dev->sector);
                        }

                        if (head_sh->batch_head) {
                                sh = list_first_entry(&sh->batch_list,
                                                      struct stripe_head,
                                                      batch_list);
                                if (sh == head_sh)
                                        continue;
                                goto again;
                        }
                }
        }

        return tx;
}

static void ops_complete_reconstruct(void *stripe_head_ref)
{
        struct stripe_head *sh = stripe_head_ref;
        int disks = sh->disks;
        int pd_idx = sh->pd_idx;
        int qd_idx = sh->qd_idx;
        int i;
        bool fua = false, sync = false, discard = false;

        pr_debug("%s: stripe %llu\n", __func__,
                (unsigned long long)sh->sector);

        for (i = disks; i--; ) {
                fua |= test_bit(R5_WantFUA, &sh->dev[i].flags);
                sync |= test_bit(R5_SyncIO, &sh->dev[i].flags);
                discard |= test_bit(R5_Discard, &sh->dev[i].flags);
        }

        for (i = disks; i--; ) {
                struct r5dev *dev = &sh->dev[i];

                if (dev->written || i == pd_idx || i == qd_idx) {
                        if (!discard && !test_bit(R5_SkipCopy, &dev->flags)) {
                                set_bit(R5_UPTODATE, &dev->flags);
                                if (test_bit(STRIPE_EXPAND_READY, &sh->state))
                                        set_bit(R5_Expanded, &dev->flags);
                        }
                        if (fua)
                                set_bit(R5_WantFUA, &dev->flags);
                        if (sync)
                                set_bit(R5_SyncIO, &dev->flags);
                }
        }

        if (sh->reconstruct_state == reconstruct_state_drain_run)
                sh->reconstruct_state = reconstruct_state_drain_result;
        else if (sh->reconstruct_state == reconstruct_state_prexor_drain_run)
                sh->reconstruct_state = reconstruct_state_prexor_drain_result;
        else {
                BUG_ON(sh->reconstruct_state != reconstruct_state_run);
                sh->reconstruct_state = reconstruct_state_result;
        }

        set_bit(STRIPE_HANDLE, &sh->state);
        raid5_release_stripe(sh);
}

static void
ops_run_reconstruct5(struct stripe_head *sh, struct raid5_percpu *percpu,
                     struct dma_async_tx_descriptor *tx)
{
        int disks = sh->disks;
        struct page **xor_srcs;
        unsigned int *off_srcs;
        struct async_submit_ctl submit;
        int count, pd_idx = sh->pd_idx, i;
        struct page *xor_dest;
        unsigned int off_dest;
        int prexor = 0;
        unsigned long flags;
        int j = 0;
        struct stripe_head *head_sh = sh;
        int last_stripe;

        pr_debug("%s: stripe %llu\n", __func__,
                (unsigned long long)sh->sector);

        for (i = 0; i < sh->disks; i++) {
                if (pd_idx == i)
                        continue;
                if (!test_bit(R5_Discard, &sh->dev[i].flags))
                        break;
        }
        if (i >= sh->disks) {
                atomic_inc(&sh->count);
                set_bit(R5_Discard, &sh->dev[pd_idx].flags);
                ops_complete_reconstruct(sh);
                return;
        }
again:
        count = 0;
        xor_srcs = to_addr_page(percpu, j);
        off_srcs = to_addr_offs(sh, percpu);
        /* check if prexor is active which means only process blocks
         * that are part of a read-modify-write (written)
         */
        if (head_sh->reconstruct_state == reconstruct_state_prexor_drain_run) {
                prexor = 1;
                off_dest = off_srcs[count] = sh->dev[pd_idx].offset;
                xor_dest = xor_srcs[count++] = sh->dev[pd_idx].page;
                for (i = disks; i--; ) {
                        struct r5dev *dev = &sh->dev[i];
                        if (head_sh->dev[i].written ||
                            test_bit(R5_InJournal, &head_sh->dev[i].flags)) {
                                off_srcs[count] = dev->offset;
                                xor_srcs[count++] = dev->page;
                        }
                }
        } else {
                xor_dest = sh->dev[pd_idx].page;
                off_dest = sh->dev[pd_idx].offset;
                for (i = disks; i--; ) {
                        struct r5dev *dev = &sh->dev[i];
                        if (i != pd_idx) {
                                off_srcs[count] = dev->offset;
                                xor_srcs[count++] = dev->page;
                        }
                }
        }

        /* 1/ if we prexor'd then the dest is reused as a source
         * 2/ if we did not prexor then we are redoing the parity
         * set ASYNC_TX_XOR_DROP_DST and ASYNC_TX_XOR_ZERO_DST
         * for the synchronous xor case
         */
        last_stripe = !head_sh->batch_head ||
                list_first_entry(&sh->batch_list,
                                 struct stripe_head, batch_list) == head_sh;
        if (last_stripe) {
                flags = ASYNC_TX_ACK |
                        (prexor ? ASYNC_TX_XOR_DROP_DST : ASYNC_TX_XOR_ZERO_DST);

                atomic_inc(&head_sh->count);
                init_async_submit(&submit, flags, tx, ops_complete_reconstruct, head_sh,
                                  to_addr_conv(sh, percpu, j));
        } else {
                flags = prexor ? ASYNC_TX_XOR_DROP_DST : ASYNC_TX_XOR_ZERO_DST;
                init_async_submit(&submit, flags, tx, NULL, NULL,
                                  to_addr_conv(sh, percpu, j));
        }

        if (unlikely(count == 1))
                tx = async_memcpy(xor_dest, xor_srcs[0], off_dest, off_srcs[0],
                                RAID5_STRIPE_SIZE(sh->raid_conf), &submit);
        else
                tx = async_xor_offs(xor_dest, off_dest, xor_srcs, off_srcs, count,
                                RAID5_STRIPE_SIZE(sh->raid_conf), &submit);
        if (!last_stripe) {
                j++;
                sh = list_first_entry(&sh->batch_list, struct stripe_head,
                                      batch_list);
                goto again;
        }
}

static void
ops_run_reconstruct6(struct stripe_head *sh, struct raid5_percpu *percpu,
                     struct dma_async_tx_descriptor *tx)
{
        struct async_submit_ctl submit;
        struct page **blocks;
        unsigned int *offs;
        int count, i, j = 0;
        struct stripe_head *head_sh = sh;
        int last_stripe;
        int synflags;
        unsigned long txflags;

        pr_debug("%s: stripe %llu\n", __func__, (unsigned long long)sh->sector);

        for (i = 0; i < sh->disks; i++) {
                if (sh->pd_idx == i || sh->qd_idx == i)
                        continue;
                if (!test_bit(R5_Discard, &sh->dev[i].flags))
                        break;
        }
        if (i >= sh->disks) {
                atomic_inc(&sh->count);
                set_bit(R5_Discard, &sh->dev[sh->pd_idx].flags);
                set_bit(R5_Discard, &sh->dev[sh->qd_idx].flags);
                ops_complete_reconstruct(sh);
                return;
        }

again:
        blocks = to_addr_page(percpu, j);
        offs = to_addr_offs(sh, percpu);

        if (sh->reconstruct_state == reconstruct_state_prexor_drain_run) {
                synflags = SYNDROME_SRC_WRITTEN;
                txflags = ASYNC_TX_ACK | ASYNC_TX_PQ_XOR_DST;
        } else {
                synflags = SYNDROME_SRC_ALL;
                txflags = ASYNC_TX_ACK;
        }

        count = set_syndrome_sources(blocks, offs, sh, synflags);
        last_stripe = !head_sh->batch_head ||
                list_first_entry(&sh->batch_list,
                                 struct stripe_head, batch_list) == head_sh;

        if (last_stripe) {
                atomic_inc(&head_sh->count);
                init_async_submit(&submit, txflags, tx, ops_complete_reconstruct,
                                  head_sh, to_addr_conv(sh, percpu, j));
        } else
                init_async_submit(&submit, 0, tx, NULL, NULL,
                                  to_addr_conv(sh, percpu, j));
        tx = async_gen_syndrome(blocks, offs, count+2,
                        RAID5_STRIPE_SIZE(sh->raid_conf),  &submit);
        if (!last_stripe) {
                j++;
                sh = list_first_entry(&sh->batch_list, struct stripe_head,
                                      batch_list);
                goto again;
        }
}

static void ops_complete_check(void *stripe_head_ref)
{
        struct stripe_head *sh = stripe_head_ref;

        pr_debug("%s: stripe %llu\n", __func__,
                (unsigned long long)sh->sector);

        sh->check_state = check_state_check_result;
        set_bit(STRIPE_HANDLE, &sh->state);
        raid5_release_stripe(sh);
}

static void ops_run_check_p(struct stripe_head *sh, struct raid5_percpu *percpu)
{
        int disks = sh->disks;
        int pd_idx = sh->pd_idx;
        int qd_idx = sh->qd_idx;
        struct page *xor_dest;
        unsigned int off_dest;
        struct page **xor_srcs = to_addr_page(percpu, 0);
        unsigned int *off_srcs = to_addr_offs(sh, percpu);
        struct dma_async_tx_descriptor *tx;
        struct async_submit_ctl submit;
        int count;
        int i;

        pr_debug("%s: stripe %llu\n", __func__,
                (unsigned long long)sh->sector);

        BUG_ON(sh->batch_head);
        count = 0;
        xor_dest = sh->dev[pd_idx].page;
        off_dest = sh->dev[pd_idx].offset;
        off_srcs[count] = off_dest;
        xor_srcs[count++] = xor_dest;
        for (i = disks; i--; ) {
                if (i == pd_idx || i == qd_idx)
                        continue;
                off_srcs[count] = sh->dev[i].offset;
                xor_srcs[count++] = sh->dev[i].page;
        }

        init_async_submit(&submit, 0, NULL, NULL, NULL,
                          to_addr_conv(sh, percpu, 0));
        tx = async_xor_val_offs(xor_dest, off_dest, xor_srcs, off_srcs, count,
                           RAID5_STRIPE_SIZE(sh->raid_conf),
                           &sh->ops.zero_sum_result, &submit);

        atomic_inc(&sh->count);
        init_async_submit(&submit, ASYNC_TX_ACK, tx, ops_complete_check, sh, NULL);
        tx = async_trigger_callback(&submit);
}

static void ops_run_check_pq(struct stripe_head *sh, struct raid5_percpu *percpu, int checkp)
{
        struct page **srcs = to_addr_page(percpu, 0);
        unsigned int *offs = to_addr_offs(sh, percpu);
        struct async_submit_ctl submit;
        int count;

        pr_debug("%s: stripe %llu checkp: %d\n", __func__,
                (unsigned long long)sh->sector, checkp);

        BUG_ON(sh->batch_head);
        count = set_syndrome_sources(srcs, offs, sh, SYNDROME_SRC_ALL);
        if (!checkp)
                srcs[count] = NULL;

        atomic_inc(&sh->count);
        init_async_submit(&submit, ASYNC_TX_ACK, NULL, ops_complete_check,
                          sh, to_addr_conv(sh, percpu, 0));
        async_syndrome_val(srcs, offs, count+2,
                           RAID5_STRIPE_SIZE(sh->raid_conf),
                           &sh->ops.zero_sum_result, percpu->spare_page, 0, &submit);
}

static void raid_run_ops(struct stripe_head *sh, unsigned long ops_request)
{
        int overlap_clear = 0, i, disks = sh->disks;
        struct dma_async_tx_descriptor *tx = NULL;
        struct r5conf *conf = sh->raid_conf;
        int level = conf->level;
        struct raid5_percpu *percpu;

        local_lock(&conf->percpu->lock);
        percpu = this_cpu_ptr(conf->percpu);
        if (test_bit(STRIPE_OP_BIOFILL, &ops_request)) {
                ops_run_biofill(sh);
                overlap_clear++;
        }

        if (test_bit(STRIPE_OP_COMPUTE_BLK, &ops_request)) {
                if (level < 6)
                        tx = ops_run_compute5(sh, percpu);
                else {
                        if (sh->ops.target2 < 0 || sh->ops.target < 0)
                                tx = ops_run_compute6_1(sh, percpu);
                        else
                                tx = ops_run_compute6_2(sh, percpu);
                }
                /* terminate the chain if reconstruct is not set to be run */
                if (tx && !test_bit(STRIPE_OP_RECONSTRUCT, &ops_request))
                        async_tx_ack(tx);
        }

        if (test_bit(STRIPE_OP_PREXOR, &ops_request)) {
                if (level < 6)
                        tx = ops_run_prexor5(sh, percpu, tx);
                else
                        tx = ops_run_prexor6(sh, percpu, tx);
        }

        if (test_bit(STRIPE_OP_PARTIAL_PARITY, &ops_request))
                tx = ops_run_partial_parity(sh, percpu, tx);

        if (test_bit(STRIPE_OP_BIODRAIN, &ops_request)) {
                tx = ops_run_biodrain(sh, tx);
                overlap_clear++;
        }

        if (test_bit(STRIPE_OP_RECONSTRUCT, &ops_request)) {
                if (level < 6)
                        ops_run_reconstruct5(sh, percpu, tx);
                else
                        ops_run_reconstruct6(sh, percpu, tx);
        }

        if (test_bit(STRIPE_OP_CHECK, &ops_request)) {
                if (sh->check_state == check_state_run)
                        ops_run_check_p(sh, percpu);
                else if (sh->check_state == check_state_run_q)
                        ops_run_check_pq(sh, percpu, 0);
                else if (sh->check_state == check_state_run_pq)
                        ops_run_check_pq(sh, percpu, 1);
                else
                        BUG();
        }

        if (overlap_clear && !sh->batch_head) {
                for (i = disks; i--; ) {
                        struct r5dev *dev = &sh->dev[i];
                        if (test_and_clear_bit(R5_Overlap, &dev->flags))
                                wake_up_bit(&dev->flags, R5_Overlap);
                }
        }
        local_unlock(&conf->percpu->lock);
}

static void free_stripe(struct kmem_cache *sc, struct stripe_head *sh)
{
#if PAGE_SIZE != DEFAULT_STRIPE_SIZE
        kfree(sh->pages);
#endif
        if (sh->ppl_page)
                __free_page(sh->ppl_page);
        kmem_cache_free(sc, sh);
}

static struct stripe_head *alloc_stripe(struct kmem_cache *sc, gfp_t gfp,
        int disks, struct r5conf *conf)
{
        struct stripe_head *sh;

        sh = kmem_cache_zalloc(sc, gfp);
        if (sh) {
                spin_lock_init(&sh->stripe_lock);
                spin_lock_init(&sh->batch_lock);
                INIT_LIST_HEAD(&sh->batch_list);
                INIT_LIST_HEAD(&sh->lru);
                INIT_LIST_HEAD(&sh->r5c);
                INIT_LIST_HEAD(&sh->log_list);
                atomic_set(&sh->count, 1);
                sh->raid_conf = conf;
                sh->log_start = MaxSector;

                if (raid5_has_ppl(conf)) {
                        sh->ppl_page = alloc_page(gfp);
                        if (!sh->ppl_page) {
                                free_stripe(sc, sh);
                                return NULL;
                        }
                }
#if PAGE_SIZE != DEFAULT_STRIPE_SIZE
                if (init_stripe_shared_pages(sh, conf, disks)) {
                        free_stripe(sc, sh);
                        return NULL;
                }
#endif
        }
        return sh;
}
static int grow_one_stripe(struct r5conf *conf, gfp_t gfp)
{
        struct stripe_head *sh;

        sh = alloc_stripe(conf->slab_cache, gfp, conf->pool_size, conf);
        if (!sh)
                return 0;

        if (grow_buffers(sh, gfp)) {
                shrink_buffers(sh);
                free_stripe(conf->slab_cache, sh);
                return 0;
        }
        sh->hash_lock_index =
                conf->max_nr_stripes % NR_STRIPE_HASH_LOCKS;
        /* we just created an active stripe so... */
        atomic_inc(&conf->active_stripes);

        raid5_release_stripe(sh);
        WRITE_ONCE(conf->max_nr_stripes, conf->max_nr_stripes + 1);
        return 1;
}

static int grow_stripes(struct r5conf *conf, int num)
{
        struct kmem_cache *sc;
        size_t namelen = sizeof(conf->cache_name[0]);
        int devs = max(conf->raid_disks, conf->previous_raid_disks);

        if (mddev_is_dm(conf->mddev))
                snprintf(conf->cache_name[0], namelen,
                        "raid%d-%p", conf->level, conf->mddev);
        else
                snprintf(conf->cache_name[0], namelen,
                        "raid%d-%s", conf->level, mdname(conf->mddev));
        snprintf(conf->cache_name[1], namelen, "%.27s-alt", conf->cache_name[0]);

        conf->active_name = 0;
        sc = kmem_cache_create(conf->cache_name[conf->active_name],
                               struct_size_t(struct stripe_head, dev, devs),
                               0, 0, NULL);
        if (!sc)
                return 1;
        conf->slab_cache = sc;
        conf->pool_size = devs;
        while (num--)
                if (!grow_one_stripe(conf, GFP_KERNEL))
                        return 1;

        return 0;
}

/**
 * scribble_alloc - allocate percpu scribble buffer for required size
 *                  of the scribble region
 * @percpu: from for_each_present_cpu() of the caller
 * @num: total number of disks in the array
 * @cnt: scribble objs count for required size of the scribble region
 *
 * The scribble buffer size must be enough to contain:
 * 1/ a struct page pointer for each device in the array +2
 * 2/ room to convert each entry in (1) to its corresponding dma
 *    (dma_map_page()) or page (page_address()) address.
 *
 * Note: the +2 is for the destination buffers of the ddf/raid6 case where we
 * calculate over all devices (not just the data blocks), using zeros in place
 * of the P and Q blocks.
 */
static int scribble_alloc(struct raid5_percpu *percpu,
                          int num, int cnt)
{
        size_t obj_size =
                sizeof(struct page *) * (num + 2) +
                sizeof(addr_conv_t) * (num + 2) +
                sizeof(unsigned int) * (num + 2);
        void *scribble;

        /*
         * If here is in raid array suspend context, it is in memalloc noio
         * context as well, there is no potential recursive memory reclaim
         * I/Os with the GFP_KERNEL flag.
         */
        scribble = kvmalloc_array(cnt, obj_size, GFP_KERNEL);
        if (!scribble)
                return -ENOMEM;

        kvfree(percpu->scribble);

        percpu->scribble = scribble;
        percpu->scribble_obj_size = obj_size;
        return 0;
}

static int resize_chunks(struct r5conf *conf, int new_disks, int new_sectors)
{
        unsigned long cpu;
        int err = 0;

        /* Never shrink. */
        if (conf->scribble_disks >= new_disks &&
            conf->scribble_sectors >= new_sectors)
                return 0;

        raid5_quiesce(conf->mddev, true);
        cpus_read_lock();

        for_each_present_cpu(cpu) {
                struct raid5_percpu *percpu;

                percpu = per_cpu_ptr(conf->percpu, cpu);
                err = scribble_alloc(percpu, new_disks,
                                     new_sectors / RAID5_STRIPE_SECTORS(conf));
                if (err)
                        break;
        }

        cpus_read_unlock();
        raid5_quiesce(conf->mddev, false);

        if (!err) {
                conf->scribble_disks = new_disks;
                conf->scribble_sectors = new_sectors;
        }
        return err;
}

static int resize_stripes(struct r5conf *conf, int newsize)
{
        /* Make all the stripes able to hold 'newsize' devices.
         * New slots in each stripe get 'page' set to a new page.
         *
         * This happens in stages:
         * 1/ create a new kmem_cache and allocate the required number of
         *    stripe_heads.
         * 2/ gather all the old stripe_heads and transfer the pages across
         *    to the new stripe_heads.  This will have the side effect of
         *    freezing the array as once all stripe_heads have been collected,
         *    no IO will be possible.  Old stripe heads are freed once their
         *    pages have been transferred over, and the old kmem_cache is
         *    freed when all stripes are done.
         * 3/ reallocate conf->disks to be suitable bigger.  If this fails,
         *    we simple return a failure status - no need to clean anything up.
         * 4/ allocate new pages for the new slots in the new stripe_heads.
         *    If this fails, we don't bother trying the shrink the
         *    stripe_heads down again, we just leave them as they are.
         *    As each stripe_head is processed the new one is released into
         *    active service.
         *
         * Once step2 is started, we cannot afford to wait for a write,
         * so we use GFP_NOIO allocations.
         */
        struct stripe_head *osh, *nsh;
        LIST_HEAD(newstripes);
        struct disk_info *ndisks;
        int err = 0;
        struct kmem_cache *sc;
        int i;
        int hash, cnt;

        md_allow_write(conf->mddev);

        /* Step 1 */
        sc = kmem_cache_create(conf->cache_name[1-conf->active_name],
                               struct_size_t(struct stripe_head, dev, newsize),
                               0, 0, NULL);
        if (!sc)
                return -ENOMEM;

        /* Need to ensure auto-resizing doesn't interfere */
        mutex_lock(&conf->cache_size_mutex);

        for (i = conf->max_nr_stripes; i; i--) {
                nsh = alloc_stripe(sc, GFP_KERNEL, newsize, conf);
                if (!nsh)
                        break;

                list_add(&nsh->lru, &newstripes);
        }
        if (i) {
                /* didn't get enough, give up */
                while (!list_empty(&newstripes)) {
                        nsh = list_entry(newstripes.next, struct stripe_head, lru);
                        list_del(&nsh->lru);
                        free_stripe(sc, nsh);
                }
                kmem_cache_destroy(sc);
                mutex_unlock(&conf->cache_size_mutex);
                return -ENOMEM;
        }
        /* Step 2 - Must use GFP_NOIO now.
         * OK, we have enough stripes, start collecting inactive
         * stripes and copying them over
         */
        hash = 0;
        cnt = 0;
        list_for_each_entry(nsh, &newstripes, lru) {
                lock_device_hash_lock(conf, hash);
                wait_event_cmd(conf->wait_for_stripe,
                                    !list_empty(conf->inactive_list + hash),
                                    unlock_device_hash_lock(conf, hash),
                                    lock_device_hash_lock(conf, hash));
                osh = get_free_stripe(conf, hash);
                unlock_device_hash_lock(conf, hash);

#if PAGE_SIZE != DEFAULT_STRIPE_SIZE
        for (i = 0; i < osh->nr_pages; i++) {
                nsh->pages[i] = osh->pages[i];
                osh->pages[i] = NULL;
        }
#endif
                for(i=0; i<conf->pool_size; i++) {
                        nsh->dev[i].page = osh->dev[i].page;
                        nsh->dev[i].orig_page = osh->dev[i].page;
                        nsh->dev[i].offset = osh->dev[i].offset;
                }
                nsh->hash_lock_index = hash;
                free_stripe(conf->slab_cache, osh);
                cnt++;
                if (cnt >= conf->max_nr_stripes / NR_STRIPE_HASH_LOCKS +
                    !!((conf->max_nr_stripes % NR_STRIPE_HASH_LOCKS) > hash)) {
                        hash++;
                        cnt = 0;
                }
        }
        kmem_cache_destroy(conf->slab_cache);

        /* Step 3.
         * At this point, we are holding all the stripes so the array
         * is completely stalled, so now is a good time to resize
         * conf->disks and the scribble region
         */
        ndisks = kzalloc_objs(struct disk_info, newsize, GFP_NOIO);
        if (ndisks) {
                for (i = 0; i < conf->pool_size; i++)
                        ndisks[i] = conf->disks[i];

                for (i = conf->pool_size; i < newsize; i++) {
                        ndisks[i].extra_page = alloc_page(GFP_NOIO);
                        if (!ndisks[i].extra_page)
                                err = -ENOMEM;
                }

                if (err) {
                        for (i = conf->pool_size; i < newsize; i++)
                                if (ndisks[i].extra_page)
                                        put_page(ndisks[i].extra_page);
                        kfree(ndisks);
                } else {
                        kfree(conf->disks);
                        conf->disks = ndisks;
                }
        } else
                err = -ENOMEM;

        conf->slab_cache = sc;
        conf->active_name = 1-conf->active_name;

        /* Step 4, return new stripes to service */
        while(!list_empty(&newstripes)) {
                nsh = list_entry(newstripes.next, struct stripe_head, lru);
                list_del_init(&nsh->lru);

#if PAGE_SIZE != DEFAULT_STRIPE_SIZE
                for (i = 0; i < nsh->nr_pages; i++) {
                        if (nsh->pages[i])
                                continue;
                        nsh->pages[i] = alloc_page(GFP_NOIO);
                        if (!nsh->pages[i])
                                err = -ENOMEM;
                }

                for (i = conf->raid_disks; i < newsize; i++) {
                        if (nsh->dev[i].page)
                                continue;
                        nsh->dev[i].page = raid5_get_dev_page(nsh, i);
                        nsh->dev[i].orig_page = nsh->dev[i].page;
                        nsh->dev[i].offset = raid5_get_page_offset(nsh, i);
                }
#else
                for (i=conf->raid_disks; i < newsize; i++)
                        if (nsh->dev[i].page == NULL) {
                                struct page *p = alloc_page(GFP_NOIO);
                                nsh->dev[i].page = p;
                                nsh->dev[i].orig_page = p;
                                nsh->dev[i].offset = 0;
                                if (!p)
                                        err = -ENOMEM;
                        }
#endif
                raid5_release_stripe(nsh);
        }
        /* critical section pass, GFP_NOIO no longer needed */

        if (!err)
                conf->pool_size = newsize;
        mutex_unlock(&conf->cache_size_mutex);

        return err;
}

static int drop_one_stripe(struct r5conf *conf)
{
        struct stripe_head *sh;
        int hash = (conf->max_nr_stripes - 1) & STRIPE_HASH_LOCKS_MASK;

        spin_lock_irq(conf->hash_locks + hash);
        sh = get_free_stripe(conf, hash);
        spin_unlock_irq(conf->hash_locks + hash);
        if (!sh)
                return 0;
        BUG_ON(atomic_read(&sh->count));
        shrink_buffers(sh);
        free_stripe(conf->slab_cache, sh);
        atomic_dec(&conf->active_stripes);
        WRITE_ONCE(conf->max_nr_stripes, conf->max_nr_stripes - 1);
        return 1;
}

static void shrink_stripes(struct r5conf *conf)
{
        while (conf->max_nr_stripes &&
               drop_one_stripe(conf))
                ;

        kmem_cache_destroy(conf->slab_cache);
        conf->slab_cache = NULL;
}

static void raid5_end_read_request(struct bio * bi)
{
        struct stripe_head *sh = bi->bi_private;
        struct r5conf *conf = sh->raid_conf;
        int disks = sh->disks, i;
        struct md_rdev *rdev = NULL;
        sector_t s;

        for (i=0 ; i<disks; i++)
                if (bi == &sh->dev[i].req)
                        break;

        pr_debug("end_read_request %llu/%d, count: %d, error %d.\n",
                (unsigned long long)sh->sector, i, atomic_read(&sh->count),
                bi->bi_status);
        if (i == disks) {
                BUG();
                return;
        }
        if (test_bit(R5_ReadRepl, &sh->dev[i].flags))
                /* If replacement finished while this request was outstanding,
                 * 'replacement' might be NULL already.
                 * In that case it moved down to 'rdev'.
                 * rdev is not removed until all requests are finished.
                 */
                rdev = conf->disks[i].replacement;
        if (!rdev)
                rdev = conf->disks[i].rdev;

        if (use_new_offset(conf, sh))
                s = sh->sector + rdev->new_data_offset;
        else
                s = sh->sector + rdev->data_offset;
        if (!bi->bi_status) {
                set_bit(R5_UPTODATE, &sh->dev[i].flags);
                if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
                        /* Note that this cannot happen on a
                         * replacement device.  We just fail those on
                         * any error
                         */
                        pr_info_ratelimited(
                                "md/raid:%s: read error corrected (%lu sectors at %llu on %pg)\n",
                                mdname(conf->mddev), RAID5_STRIPE_SECTORS(conf),
                                (unsigned long long)s,
                                rdev->bdev);
                        atomic_add(RAID5_STRIPE_SECTORS(conf), &rdev->corrected_errors);
                        clear_bit(R5_ReadError, &sh->dev[i].flags);
                        clear_bit(R5_ReWrite, &sh->dev[i].flags);
                } else if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags))
                        clear_bit(R5_ReadNoMerge, &sh->dev[i].flags);

                if (test_bit(R5_InJournal, &sh->dev[i].flags))
                        /*
                         * end read for a page in journal, this
                         * must be preparing for prexor in rmw
                         */
                        set_bit(R5_OrigPageUPTDODATE, &sh->dev[i].flags);

                if (atomic_read(&rdev->read_errors))
                        atomic_set(&rdev->read_errors, 0);
        } else {
                int retry = 0;
                int set_bad = 0;

                clear_bit(R5_UPTODATE, &sh->dev[i].flags);
                if (!(bi->bi_status == BLK_STS_PROTECTION))
                        atomic_inc(&rdev->read_errors);
                if (test_bit(R5_ReadRepl, &sh->dev[i].flags))
                        pr_warn_ratelimited(
                                "md/raid:%s: read error on replacement device (sector %llu on %pg).\n",
                                mdname(conf->mddev),
                                (unsigned long long)s,
                                rdev->bdev);
                else if (conf->mddev->degraded >= conf->max_degraded) {
                        set_bad = 1;
                        pr_warn_ratelimited(
                                "md/raid:%s: read error not correctable (sector %llu on %pg).\n",
                                mdname(conf->mddev),
                                (unsigned long long)s,
                                rdev->bdev);
                } else if (test_bit(R5_ReWrite, &sh->dev[i].flags)) {
                        /* Oh, no!!! */
                        set_bad = 1;
                        pr_warn_ratelimited(
                                "md/raid:%s: read error NOT corrected!! (sector %llu on %pg).\n",
                                mdname(conf->mddev),
                                (unsigned long long)s,
                                rdev->bdev);
                } else if (atomic_read(&rdev->read_errors)
                         > conf->max_nr_stripes) {
                        if (!test_bit(Faulty, &rdev->flags)) {
                                pr_warn("md/raid:%s: %d read_errors > %d stripes\n",
                                    mdname(conf->mddev),
                                    atomic_read(&rdev->read_errors),
                                    conf->max_nr_stripes);
                                pr_warn("md/raid:%s: Too many read errors, failing device %pg.\n",
                                    mdname(conf->mddev), rdev->bdev);
                        }
                } else
                        retry = 1;
                if (set_bad && test_bit(In_sync, &rdev->flags)
                    && !test_bit(R5_ReadNoMerge, &sh->dev[i].flags))
                        retry = 1;
                if (retry)
                        if (sh->qd_idx >= 0 && sh->pd_idx == i)
                                set_bit(R5_ReadError, &sh->dev[i].flags);
                        else if (test_bit(R5_ReadNoMerge, &sh->dev[i].flags)) {
                                set_bit(R5_ReadError, &sh->dev[i].flags);
                                clear_bit(R5_ReadNoMerge, &sh->dev[i].flags);
                        } else
                                set_bit(R5_ReadNoMerge, &sh->dev[i].flags);
                else {
                        clear_bit(R5_ReadError, &sh->dev[i].flags);
                        clear_bit(R5_ReWrite, &sh->dev[i].flags);
                        if (!(set_bad && test_bit(In_sync, &rdev->flags)))
                                rdev_set_badblocks(rdev, sh->sector,
                                                   RAID5_STRIPE_SECTORS(conf), 0);
                }
        }
        rdev_dec_pending(rdev, conf->mddev);
        bio_uninit(bi);
        clear_bit(R5_LOCKED, &sh->dev[i].flags);
        set_bit(STRIPE_HANDLE, &sh->state);
        raid5_release_stripe(sh);
}

static void raid5_end_write_request(struct bio *bi)
{
        struct stripe_head *sh = bi->bi_private;
        struct r5conf *conf = sh->raid_conf;
        int disks = sh->disks, i;
        struct md_rdev *rdev;
        int replacement = 0;

        for (i = 0 ; i < disks; i++) {
                if (bi == &sh->dev[i].req) {
                        rdev = conf->disks[i].rdev;
                        break;
                }
                if (bi == &sh->dev[i].rreq) {
                        rdev = conf->disks[i].replacement;
                        if (rdev)
                                replacement = 1;
                        else
                                /* rdev was removed and 'replacement'
                                 * replaced it.  rdev is not removed
                                 * until all requests are finished.
                                 */
                                rdev = conf->disks[i].rdev;
                        break;
                }
        }
        pr_debug("end_write_request %llu/%d, count %d, error: %d.\n",
                (unsigned long long)sh->sector, i, atomic_read(&sh->count),
                bi->bi_status);
        if (i == disks) {
                BUG();
                return;
        }

        if (replacement) {
                if (bi->bi_status)
                        md_error(conf->mddev, rdev);
                else if (rdev_has_badblock(rdev, sh->sector,
                                           RAID5_STRIPE_SECTORS(conf)))
                        set_bit(R5_MadeGoodRepl, &sh->dev[i].flags);
        } else {
                if (bi->bi_status) {
                        set_bit(WriteErrorSeen, &rdev->flags);
                        set_bit(R5_WriteError, &sh->dev[i].flags);
                        if (!test_and_set_bit(WantReplacement, &rdev->flags))
                                set_bit(MD_RECOVERY_NEEDED,
                                        &rdev->mddev->recovery);
                } else if (rdev_has_badblock(rdev, sh->sector,
                                             RAID5_STRIPE_SECTORS(conf))) {
                        set_bit(R5_MadeGood, &sh->dev[i].flags);
                        if (test_bit(R5_ReadError, &sh->dev[i].flags))
                                /* That was a successful write so make
                                 * sure it looks like we already did
                                 * a re-write.
                                 */
                                set_bit(R5_ReWrite, &sh->dev[i].flags);
                }
        }
        rdev_dec_pending(rdev, conf->mddev);

        if (sh->batch_head && bi->bi_status && !replacement)
                set_bit(STRIPE_BATCH_ERR, &sh->batch_head->state);

        bio_uninit(bi);
        if (!test_and_clear_bit(R5_DOUBLE_LOCKED, &sh->dev[i].flags))
                clear_bit(R5_LOCKED, &sh->dev[i].flags);
        set_bit(STRIPE_HANDLE, &sh->state);

        if (sh->batch_head && sh != sh->batch_head)
                raid5_release_stripe(sh->batch_head);
        raid5_release_stripe(sh);
}

static void raid5_error(struct mddev *mddev, struct md_rdev *rdev)
{
        struct r5conf *conf = mddev->private;
        unsigned long flags;
        pr_debug("raid456: error called\n");

        pr_crit("md/raid:%s: Disk failure on %pg, disabling device.\n",
                mdname(mddev), rdev->bdev);

        spin_lock_irqsave(&conf->device_lock, flags);
        set_bit(Faulty, &rdev->flags);
        clear_bit(In_sync, &rdev->flags);
        mddev->degraded = raid5_calc_degraded(conf);

        if (has_failed(conf)) {
                set_bit(MD_BROKEN, &conf->mddev->flags);

                pr_crit("md/raid:%s: Cannot continue operation (%d/%d failed).\n",
                        mdname(mddev), mddev->degraded, conf->raid_disks);
        } else {
                pr_crit("md/raid:%s: Operation continuing on %d devices.\n",
                        mdname(mddev), conf->raid_disks - mddev->degraded);
        }

        spin_unlock_irqrestore(&conf->device_lock, flags);
        set_bit(MD_RECOVERY_INTR, &mddev->recovery);

        set_bit(Blocked, &rdev->flags);
        set_mask_bits(&mddev->sb_flags, 0,
                      BIT(MD_SB_CHANGE_DEVS) | BIT(MD_SB_CHANGE_PENDING));
        r5c_update_on_rdev_error(mddev, rdev);
}

/*
 * Input: a 'big' sector number,
 * Output: index of the data and parity disk, and the sector # in them.
 */
sector_t raid5_compute_sector(struct r5conf *conf, sector_t r_sector,
                              int previous, int *dd_idx,
                              struct stripe_head *sh)
{
        sector_t stripe, stripe2;
        sector_t chunk_number;
        unsigned int chunk_offset;
        int pd_idx, qd_idx;
        int ddf_layout = 0;
        sector_t new_sector;
        int algorithm = previous ? conf->prev_algo
                                 : conf->algorithm;
        int sectors_per_chunk = previous ? conf->prev_chunk_sectors
                                         : conf->chunk_sectors;
        int raid_disks = previous ? conf->previous_raid_disks
                                  : conf->raid_disks;
        int data_disks = raid_disks - conf->max_degraded;

        /* First compute the information on this sector */

        /*
         * Compute the chunk number and the sector offset inside the chunk
         */
        chunk_offset = sector_div(r_sector, sectors_per_chunk);
        chunk_number = r_sector;

        /*
         * Compute the stripe number
         */
        stripe = chunk_number;
        *dd_idx = sector_div(stripe, data_disks);
        stripe2 = stripe;
        /*
         * Select the parity disk based on the user selected algorithm.
         */
        pd_idx = qd_idx = -1;
        switch(conf->level) {
        case 4:
                pd_idx = data_disks;
                break;
        case 5:
                switch (algorithm) {
                case ALGORITHM_LEFT_ASYMMETRIC:
                        pd_idx = data_disks - sector_div(stripe2, raid_disks);
                        if (*dd_idx >= pd_idx)
                                (*dd_idx)++;
                        break;
                case ALGORITHM_RIGHT_ASYMMETRIC:
                        pd_idx = sector_div(stripe2, raid_disks);
                        if (*dd_idx >= pd_idx)
                                (*dd_idx)++;
                        break;
                case ALGORITHM_LEFT_SYMMETRIC:
                        pd_idx = data_disks - sector_div(stripe2, raid_disks);
                        *dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks;
                        break;
                case ALGORITHM_RIGHT_SYMMETRIC:
                        pd_idx = sector_div(stripe2, raid_disks);
                        *dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks;
                        break;
                case ALGORITHM_PARITY_0:
                        pd_idx = 0;
                        (*dd_idx)++;
                        break;
                case ALGORITHM_PARITY_N:
                        pd_idx = data_disks;
                        break;
                default:
                        BUG();
                }
                break;
        case 6:

                switch (algorithm) {
                case ALGORITHM_LEFT_ASYMMETRIC:
                        pd_idx = raid_disks - 1 - sector_div(stripe2, raid_disks);
                        qd_idx = pd_idx + 1;
                        if (pd_idx == raid_disks-1) {
                                (*dd_idx)++;    /* Q D D D P */
                                qd_idx = 0;
                        } else if (*dd_idx >= pd_idx)
                                (*dd_idx) += 2; /* D D P Q D */
                        break;
                case ALGORITHM_RIGHT_ASYMMETRIC:
                        pd_idx = sector_div(stripe2, raid_disks);
                        qd_idx = pd_idx + 1;
                        if (pd_idx == raid_disks-1) {
                                (*dd_idx)++;    /* Q D D D P */
                                qd_idx = 0;
                        } else if (*dd_idx >= pd_idx)
                                (*dd_idx) += 2; /* D D P Q D */
                        break;
                case ALGORITHM_LEFT_SYMMETRIC:
                        pd_idx = raid_disks - 1 - sector_div(stripe2, raid_disks);
                        qd_idx = (pd_idx + 1) % raid_disks;
                        *dd_idx = (pd_idx + 2 + *dd_idx) % raid_disks;
                        break;
                case ALGORITHM_RIGHT_SYMMETRIC:
                        pd_idx = sector_div(stripe2, raid_disks);
                        qd_idx = (pd_idx + 1) % raid_disks;
                        *dd_idx = (pd_idx + 2 + *dd_idx) % raid_disks;
                        break;

                case ALGORITHM_PARITY_0:
                        pd_idx = 0;
                        qd_idx = 1;
                        (*dd_idx) += 2;
                        break;
                case ALGORITHM_PARITY_N:
                        pd_idx = data_disks;
                        qd_idx = data_disks + 1;
                        break;

                case ALGORITHM_ROTATING_ZERO_RESTART:
                        /* Exactly the same as RIGHT_ASYMMETRIC, but or
                         * of blocks for computing Q is different.
                         */
                        pd_idx = sector_div(stripe2, raid_disks);
                        qd_idx = pd_idx + 1;
                        if (pd_idx == raid_disks-1) {
                                (*dd_idx)++;    /* Q D D D P */
                                qd_idx = 0;
                        } else if (*dd_idx >= pd_idx)
                                (*dd_idx) += 2; /* D D P Q D */
                        ddf_layout = 1;
                        break;

                case ALGORITHM_ROTATING_N_RESTART:
                        /* Same a left_asymmetric, by first stripe is
                         * D D D P Q  rather than
                         * Q D D D P
                         */
                        stripe2 += 1;
                        pd_idx = raid_disks - 1 - sector_div(stripe2, raid_disks);
                        qd_idx = pd_idx + 1;
                        if (pd_idx == raid_disks-1) {
                                (*dd_idx)++;    /* Q D D D P */
                                qd_idx = 0;
                        } else if (*dd_idx >= pd_idx)
                                (*dd_idx) += 2; /* D D P Q D */
                        ddf_layout = 1;
                        break;

                case ALGORITHM_ROTATING_N_CONTINUE:
                        /* Same as left_symmetric but Q is before P */
                        pd_idx = raid_disks - 1 - sector_div(stripe2, raid_disks);
                        qd_idx = (pd_idx + raid_disks - 1) % raid_disks;
                        *dd_idx = (pd_idx + 1 + *dd_idx) % raid_disks;
                        ddf_layout = 1;
                        break;

                case ALGORITHM_LEFT_ASYMMETRIC_6:
                        /* RAID5 left_asymmetric, with Q on last device */
                        pd_idx = data_disks - sector_div(stripe2, raid_disks-1);
                        if (*dd_idx >= pd_idx)
                                (*dd_idx)++;
                        qd_idx = raid_disks - 1;
                        break;

                case ALGORITHM_RIGHT_ASYMMETRIC_6:
                        pd_idx = sector_div(stripe2, raid_disks-1);
                        if (*dd_idx >= pd_idx)
                                (*dd_idx)++;
                        qd_idx = raid_disks - 1;
                        break;

                case ALGORITHM_LEFT_SYMMETRIC_6:
                        pd_idx = data_disks - sector_div(stripe2, raid_disks-1);
                        *dd_idx = (pd_idx + 1 + *dd_idx) % (raid_disks-1);
                        qd_idx = raid_disks - 1;
                        break;

                case ALGORITHM_RIGHT_SYMMETRIC_6:
                        pd_idx = sector_div(stripe2, raid_disks-1);
                        *dd_idx = (pd_idx + 1 + *dd_idx) % (raid_disks-1);
                        qd_idx = raid_disks - 1;
                        break;

                case ALGORITHM_PARITY_0_6:
                        pd_idx = 0;
                        (*dd_idx)++;
                        qd_idx = raid_disks - 1;
                        break;

                default:
                        BUG();
                }
                break;
        }

        if (sh) {
                sh->pd_idx = pd_idx;
                sh->qd_idx = qd_idx;
                sh->ddf_layout = ddf_layout;
        }
        /*
         * Finally, compute the new sector number
         */
        new_sector = (sector_t)stripe * sectors_per_chunk + chunk_offset;
        return new_sector;
}

sector_t raid5_compute_blocknr(struct stripe_head *sh, int i, int previous)
{
        struct r5conf *conf = sh->raid_conf;
        int raid_disks = sh->disks;
        int data_disks = raid_disks - conf->max_degraded;
        sector_t new_sector = sh->sector, check;
        int sectors_per_chunk = previous ? conf->prev_chunk_sectors
                                         : conf->chunk_sectors;
        int algorithm = previous ? conf->prev_algo
                                 : conf->algorithm;
        sector_t stripe;
        int chunk_offset;
        sector_t chunk_number;
        int dummy1, dd_idx = i;
        sector_t r_sector;
        struct stripe_head sh2;

        chunk_offset = sector_div(new_sector, sectors_per_chunk);
        stripe = new_sector;

        if (i == sh->pd_idx)
                return 0;
        switch(conf->level) {
        case 4: break;
        case 5:
                switch (algorithm) {
                case ALGORITHM_LEFT_ASYMMETRIC:
                case ALGORITHM_RIGHT_ASYMMETRIC:
                        if (i > sh->pd_idx)
                                i--;
                        break;
                case ALGORITHM_LEFT_SYMMETRIC:
                case ALGORITHM_RIGHT_SYMMETRIC:
                        if (i < sh->pd_idx)
                                i += raid_disks;
                        i -= (sh->pd_idx + 1);
                        break;
                case ALGORITHM_PARITY_0:
                        i -= 1;
                        break;
                case ALGORITHM_PARITY_N:
                        break;
                default:
                        BUG();
                }
                break;
        case 6:
                if (i == sh->qd_idx)
                        return 0; /* It is the Q disk */
                switch (algorithm) {
                case ALGORITHM_LEFT_ASYMMETRIC:
                case ALGORITHM_RIGHT_ASYMMETRIC:
                case ALGORITHM_ROTATING_ZERO_RESTART:
                case ALGORITHM_ROTATING_N_RESTART:
                        if (sh->pd_idx == raid_disks-1)
                                i--;    /* Q D D D P */
                        else if (i > sh->pd_idx)
                                i -= 2; /* D D P Q D */
                        break;
                case ALGORITHM_LEFT_SYMMETRIC:
                case ALGORITHM_RIGHT_SYMMETRIC:
                        if (sh->pd_idx == raid_disks-1)
                                i--; /* Q D D D P */
                        else {
                                /* D D P Q D */
                                if (i < sh->pd_idx)
                                        i += raid_disks;
                                i -= (sh->pd_idx + 2);
                        }
                        break;
                case ALGORITHM_PARITY_0:
                        i -= 2;
                        break;
                case ALGORITHM_PARITY_N:
                        break;
                case ALGORITHM_ROTATING_N_CONTINUE:
                        /* Like left_symmetric, but P is before Q */
                        if (sh->pd_idx == 0)
                                i--;    /* P D D D Q */
                        else {
                                /* D D Q P D */
                                if (i < sh->pd_idx)
                                        i += raid_disks;
                                i -= (sh->pd_idx + 1);
                        }
                        break;
                case ALGORITHM_LEFT_ASYMMETRIC_6:
                case ALGORITHM_RIGHT_ASYMMETRIC_6:
                        if (i > sh->pd_idx)
                                i--;
                        break;
                case ALGORITHM_LEFT_SYMMETRIC_6:
                case ALGORITHM_RIGHT_SYMMETRIC_6:
                        if (i < sh->pd_idx)
                                i += data_disks + 1;
                        i -= (sh->pd_idx + 1);
                        break;
                case ALGORITHM_PARITY_0_6:
                        i -= 1;
                        break;
                default:
                        BUG();
                }
                break;
        }

        chunk_number = stripe * data_disks + i;
        r_sector = chunk_number * sectors_per_chunk + chunk_offset;

        check = raid5_compute_sector(conf, r_sector,
                                     previous, &dummy1, &sh2);
        if (check != sh->sector || dummy1 != dd_idx || sh2.pd_idx != sh->pd_idx
                || sh2.qd_idx != sh->qd_idx) {
                pr_warn("md/raid:%s: compute_blocknr: map not correct\n",
                        mdname(conf->mddev));
                return 0;
        }
        return r_sector;
}

/*
 * There are cases where we want handle_stripe_dirtying() and
 * schedule_reconstruction() to delay towrite to some dev of a stripe.
 *
 * This function checks whether we want to delay the towrite. Specifically,
 * we delay the towrite when:
 *
 *   1. degraded stripe has a non-overwrite to the missing dev, AND this
 *      stripe has data in journal (for other devices).
 *
 *      In this case, when reading data for the non-overwrite dev, it is
 *      necessary to handle complex rmw of write back cache (prexor with
 *      orig_page, and xor with page). To keep read path simple, we would
 *      like to flush data in journal to RAID disks first, so complex rmw
 *      is handled in the write patch (handle_stripe_dirtying).
 *
 *   2. when journal space is critical (R5C_LOG_CRITICAL=1)
 *
 *      It is important to be able to flush all stripes in raid5-cache.
 *      Therefore, we need reserve some space on the journal device for
 *      these flushes. If flush operation includes pending writes to the
 *      stripe, we need to reserve (conf->raid_disk + 1) pages per stripe
 *      for the flush out. If we exclude these pending writes from flush
 *      operation, we only need (conf->max_degraded + 1) pages per stripe.
 *      Therefore, excluding pending writes in these cases enables more
 *      efficient use of the journal device.
 *
 *      Note: To make sure the stripe makes progress, we only delay
 *      towrite for stripes with data already in journal (injournal > 0).
 *      When LOG_CRITICAL, stripes with injournal == 0 will be sent to
 *      no_space_stripes list.
 *
 *   3. during journal failure
 *      In journal failure, we try to flush all cached data to raid disks
 *      based on data in stripe cache. The array is read-only to upper
 *      layers, so we would skip all pending writes.
 *
 */
static inline bool delay_towrite(struct r5conf *conf,
                                 struct r5dev *dev,
                                 struct stripe_head_state *s)
{
        /* case 1 above */
        if (!test_bit(R5_OVERWRITE, &dev->flags) &&
            !test_bit(R5_Insync, &dev->flags) && s->injournal)
                return true;
        /* case 2 above */
        if (test_bit(R5C_LOG_CRITICAL, &conf->cache_state) &&
            s->injournal > 0)
                return true;
        /* case 3 above */
        if (s->log_failed && s->injournal)
                return true;
        return false;
}

static void
schedule_reconstruction(struct stripe_head *sh, struct stripe_head_state *s,
                         int rcw, int expand)
{
        int i, pd_idx = sh->pd_idx, qd_idx = sh->qd_idx, disks = sh->disks;
        struct r5conf *conf = sh->raid_conf;
        int level = conf->level;

        if (rcw) {
                /*
                 * In some cases, handle_stripe_dirtying initially decided to
                 * run rmw and allocates extra page for prexor. However, rcw is
                 * cheaper later on. We need to free the extra page now,
                 * because we won't be able to do that in ops_complete_prexor().
                 */
                r5c_release_extra_page(sh);

                for (i = disks; i--; ) {
                        struct r5dev *dev = &sh->dev[i];

                        if (dev->towrite && !delay_towrite(conf, dev, s)) {
                                set_bit(R5_LOCKED, &dev->flags);
                                set_bit(R5_Wantdrain, &dev->flags);
                                if (!expand)
                                        clear_bit(R5_UPTODATE, &dev->flags);
                                s->locked++;
                        } else if (test_bit(R5_InJournal, &dev->flags)) {
                                set_bit(R5_LOCKED, &dev->flags);
                                s->locked++;
                        }
                }
                /* if we are not expanding this is a proper write request, and
                 * there will be bios with new data to be drained into the
                 * stripe cache
                 */
                if (!expand) {
                        if (!s->locked)
                                /* False alarm, nothing to do */
                                return;
                        sh->reconstruct_state = reconstruct_state_drain_run;
                        set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
                } else
                        sh->reconstruct_state = reconstruct_state_run;

                set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);

                if (s->locked + conf->max_degraded == disks)
                        if (!test_and_set_bit(STRIPE_FULL_WRITE, &sh->state))
                                atomic_inc(&conf->pending_full_writes);
        } else {
                BUG_ON(!(test_bit(R5_UPTODATE, &sh->dev[pd_idx].flags) ||
                        test_bit(R5_Wantcompute, &sh->dev[pd_idx].flags)));
                BUG_ON(level == 6 &&
                        (!(test_bit(R5_UPTODATE, &sh->dev[qd_idx].flags) ||
                           test_bit(R5_Wantcompute, &sh->dev[qd_idx].flags))));

                for (i = disks; i--; ) {
                        struct r5dev *dev = &sh->dev[i];
                        if (i == pd_idx || i == qd_idx)
                                continue;

                        if (dev->towrite &&
                            (test_bit(R5_UPTODATE, &dev->flags) ||
                             test_bit(R5_Wantcompute, &dev->flags))) {
                                set_bit(R5_Wantdrain, &dev->flags);
                                set_bit(R5_LOCKED, &dev->flags);
                                clear_bit(R5_UPTODATE, &dev->flags);
                                s->locked++;
                        } else if (test_bit(R5_InJournal, &dev->flags)) {
                                set_bit(R5_LOCKED, &dev->flags);
                                s->locked++;
                        }
                }
                if (!s->locked)
                        /* False alarm - nothing to do */
                        return;
                sh->reconstruct_state = reconstruct_state_prexor_drain_run;
                set_bit(STRIPE_OP_PREXOR, &s->ops_request);
                set_bit(STRIPE_OP_BIODRAIN, &s->ops_request);
                set_bit(STRIPE_OP_RECONSTRUCT, &s->ops_request);
        }

        /* keep the parity disk(s) locked while asynchronous operations
         * are in flight
         */
        set_bit(R5_LOCKED, &sh->dev[pd_idx].flags);
        clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
        s->locked++;

        if (level == 6) {
                int qd_idx = sh->qd_idx;
                struct r5dev *dev = &sh->dev[qd_idx];

                set_bit(R5_LOCKED, &dev->flags);
                clear_bit(R5_UPTODATE, &dev->flags);
                s->locked++;
        }

        if (raid5_has_ppl(sh->raid_conf) && sh->ppl_page &&
            test_bit(STRIPE_OP_BIODRAIN, &s->ops_request) &&
            !test_bit(STRIPE_FULL_WRITE, &sh->state) &&
            test_bit(R5_Insync, &sh->dev[pd_idx].flags))
                set_bit(STRIPE_OP_PARTIAL_PARITY, &s->ops_request);

        pr_debug("%s: stripe %llu locked: %d ops_request: %lx\n",
                __func__, (unsigned long long)sh->sector,
                s->locked, s->ops_request);
}

static bool stripe_bio_overlaps(struct stripe_head *sh, struct bio *bi,
                                int dd_idx, int forwrite)
{
        struct r5conf *conf = sh->raid_conf;
        struct bio **bip;

        pr_debug("checking bi b#%llu to stripe s#%llu\n",
                 bi->bi_iter.bi_sector, sh->sector);

        /* Don't allow new IO added to stripes in batch list */
        if (sh->batch_head)
                return true;

        if (forwrite)
                bip = &sh->dev[dd_idx].towrite;
        else
                bip = &sh->dev[dd_idx].toread;

        while (*bip && (*bip)->bi_iter.bi_sector < bi->bi_iter.bi_sector) {
                if (bio_end_sector(*bip) > bi->bi_iter.bi_sector)
                        return true;
                bip = &(*bip)->bi_next;
        }

        if (*bip && (*bip)->bi_iter.bi_sector < bio_end_sector(bi))
                return true;

        if (forwrite && raid5_has_ppl(conf)) {
                /*
                 * With PPL only writes to consecutive data chunks within a
                 * stripe are allowed because for a single stripe_head we can
                 * only have one PPL entry at a time, which describes one data
                 * range. Not really an overlap, but R5_Overlap can be
                 * used to handle this.
                 */
                sector_t sector;
                sector_t first = 0;
                sector_t last = 0;
                int count = 0;
                int i;

                for (i = 0; i < sh->disks; i++) {
                        if (i != sh->pd_idx &&
                            (i == dd_idx || sh->dev[i].towrite)) {
                                sector = sh->dev[i].sector;
                                if (count == 0 || sector < first)
                                        first = sector;
                                if (sector > last)
                                        last = sector;
                                count++;
                        }
                }

                if (first + conf->chunk_sectors * (count - 1) != last)
                        return true;
        }

        return false;
}

static void __add_stripe_bio(struct stripe_head *sh, struct bio *bi,
                             int dd_idx, int forwrite, int previous)
{
        struct r5conf *conf = sh->raid_conf;
        struct bio **bip;
        int firstwrite = 0;

        if (forwrite) {
                bip = &sh->dev[dd_idx].towrite;
                if (!*bip)
                        firstwrite = 1;
        } else {
                bip = &sh->dev[dd_idx].toread;
        }

        while (*bip && (*bip)->bi_iter.bi_sector < bi->bi_iter.bi_sector)
                bip = &(*bip)->bi_next;

        if (!forwrite || previous)
                clear_bit(STRIPE_BATCH_READY, &sh->state);

        BUG_ON(*bip && bi->bi_next && (*bip) != bi->bi_next);
        if (*bip)
                bi->bi_next = *bip;
        *bip = bi;
        bio_inc_remaining(bi);
        md_write_inc(conf->mddev, bi);

        if (forwrite) {
                /* check if page is covered */
                sector_t sector = sh->dev[dd_idx].sector;
                for (bi=sh->dev[dd_idx].towrite;
                     sector < sh->dev[dd_idx].sector + RAID5_STRIPE_SECTORS(conf) &&
                             bi && bi->bi_iter.bi_sector <= sector;
                     bi = r5_next_bio(conf, bi, sh->dev[dd_idx].sector)) {
                        if (bio_end_sector(bi) >= sector)
                                sector = bio_end_sector(bi);
                }
                if (sector >= sh->dev[dd_idx].sector + RAID5_STRIPE_SECTORS(conf))
                        if (!test_and_set_bit(R5_OVERWRITE, &sh->dev[dd_idx].flags))
                                sh->overwrite_disks++;
        }

        pr_debug("added bi b#%llu to stripe s#%llu, disk %d, logical %llu\n",
                 (*bip)->bi_iter.bi_sector, sh->sector, dd_idx,
                 sh->dev[dd_idx].sector);

        if (conf->mddev->bitmap && firstwrite && !sh->batch_head) {
                sh->bm_seq = conf->seq_flush+1;
                set_bit(STRIPE_BIT_DELAY, &sh->state);
        }
}

/*
 * Each stripe/dev can have one or more bios attached.
 * toread/towrite point to the first in a chain.
 * The bi_next chain must be in order.
 */
static bool add_stripe_bio(struct stripe_head *sh, struct bio *bi,
                           int dd_idx, int forwrite, int previous)
{
        spin_lock_irq(&sh->stripe_lock);

        if (stripe_bio_overlaps(sh, bi, dd_idx, forwrite)) {
                set_bit(R5_Overlap, &sh->dev[dd_idx].flags);
                spin_unlock_irq(&sh->stripe_lock);
                return false;
        }

        __add_stripe_bio(sh, bi, dd_idx, forwrite, previous);
        spin_unlock_irq(&sh->stripe_lock);
        return true;
}

static void end_reshape(struct r5conf *conf);

static void stripe_set_idx(sector_t stripe, struct r5conf *conf, int previous,
                            struct stripe_head *sh)
{
        int sectors_per_chunk =
                previous ? conf->prev_chunk_sectors : conf->chunk_sectors;
        int dd_idx;
        int chunk_offset = sector_div(stripe, sectors_per_chunk);
        int disks = previous ? conf->previous_raid_disks : conf->raid_disks;

        raid5_compute_sector(conf,
                             stripe * (disks - conf->max_degraded)
                             *sectors_per_chunk + chunk_offset,
                             previous,
                             &dd_idx, sh);
}

static void
handle_failed_stripe(struct r5conf *conf, struct stripe_head *sh,
                     struct stripe_head_state *s, int disks)
{
        int i;
        BUG_ON(sh->batch_head);
        for (i = disks; i--; ) {
                struct bio *bi;

                if (test_bit(R5_ReadError, &sh->dev[i].flags)) {
                        struct md_rdev *rdev = conf->disks[i].rdev;

                        if (rdev && test_bit(In_sync, &rdev->flags) &&
                            !test_bit(Faulty, &rdev->flags))
                                atomic_inc(&rdev->nr_pending);
                        else
                                rdev = NULL;
                        if (rdev) {
                                rdev_set_badblocks(rdev,
                                                   sh->sector,
                                                   RAID5_STRIPE_SECTORS(conf),
                                                   0);
                                rdev_dec_pending(rdev, conf->mddev);
                        }
                }
                spin_lock_irq(&sh->stripe_lock);
                /* fail all writes first */
                bi = sh->dev[i].towrite;
                sh->dev[i].towrite = NULL;
                sh->overwrite_disks = 0;
                spin_unlock_irq(&sh->stripe_lock);

                log_stripe_write_finished(sh);

                if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
                        wake_up_bit(&sh->dev[i].flags, R5_Overlap);

                while (bi && bi->bi_iter.bi_sector <
                        sh->dev[i].sector + RAID5_STRIPE_SECTORS(conf)) {
                        struct bio *nextbi = r5_next_bio(conf, bi, sh->dev[i].sector);

                        md_write_end(conf->mddev);
                        bio_io_error(bi);
                        bi = nextbi;
                }
                /* and fail all 'written' */
                bi = sh->dev[i].written;
                sh->dev[i].written = NULL;
                if (test_and_clear_bit(R5_SkipCopy, &sh->dev[i].flags)) {
                        WARN_ON(test_bit(R5_UPTODATE, &sh->dev[i].flags));
                        sh->dev[i].page = sh->dev[i].orig_page;
                }

                while (bi && bi->bi_iter.bi_sector <
                       sh->dev[i].sector + RAID5_STRIPE_SECTORS(conf)) {
                        struct bio *bi2 = r5_next_bio(conf, bi, sh->dev[i].sector);

                        md_write_end(conf->mddev);
                        bio_io_error(bi);
                        bi = bi2;
                }

                /* fail any reads if this device is non-operational and
                 * the data has not reached the cache yet.
                 */
                if (!test_bit(R5_Wantfill, &sh->dev[i].flags) &&
                    s->failed > conf->max_degraded &&
                    (!test_bit(R5_Insync, &sh->dev[i].flags) ||
                      test_bit(R5_ReadError, &sh->dev[i].flags))) {
                        spin_lock_irq(&sh->stripe_lock);
                        bi = sh->dev[i].toread;
                        sh->dev[i].toread = NULL;
                        spin_unlock_irq(&sh->stripe_lock);
                        if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
                                wake_up_bit(&sh->dev[i].flags, R5_Overlap);
                        if (bi)
                                s->to_read--;
                        while (bi && bi->bi_iter.bi_sector <
                               sh->dev[i].sector + RAID5_STRIPE_SECTORS(conf)) {
                                struct bio *nextbi =
                                        r5_next_bio(conf, bi, sh->dev[i].sector);

                                bio_io_error(bi);
                                bi = nextbi;
                        }
                }
                /* If we were in the middle of a write the parity block might
                 * still be locked - so just clear all R5_LOCKED flags
                 */
                clear_bit(R5_LOCKED, &sh->dev[i].flags);
        }
        s->to_write = 0;
        s->written = 0;

        if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
                if (atomic_dec_and_test(&conf->pending_full_writes))
                        md_wakeup_thread(conf->mddev->thread);
}

static void
handle_failed_sync(struct r5conf *conf, struct stripe_head *sh,
                   struct stripe_head_state *s)
{
        int abort = 0;
        int i;

        BUG_ON(sh->batch_head);
        clear_bit(STRIPE_SYNCING, &sh->state);
        if (test_and_clear_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags))
                wake_up_bit(&sh->dev[sh->pd_idx].flags, R5_Overlap);
        s->syncing = 0;
        s->replacing = 0;
        /* There is nothing more to do for sync/check/repair.
         * Don't even need to abort as that is handled elsewhere
         * if needed, and not always wanted e.g. if there is a known
         * bad block here.
         * For recover/replace we need to record a bad block on all
         * non-sync devices, or abort the recovery
         */
        if (test_bit(MD_RECOVERY_RECOVER, &conf->mddev->recovery)) {
                /* During recovery devices cannot be removed, so
                 * locking and refcounting of rdevs is not needed
                 */
                for (i = 0; i < conf->raid_disks; i++) {
                        struct md_rdev *rdev = conf->disks[i].rdev;

                        if (rdev
                            && !test_bit(Faulty, &rdev->flags)
                            && !test_bit(In_sync, &rdev->flags)
                            && !rdev_set_badblocks(rdev, sh->sector,
                                                   RAID5_STRIPE_SECTORS(conf), 0))
                                abort = 1;
                        rdev = conf->disks[i].replacement;

                        if (rdev
                            && !test_bit(Faulty, &rdev->flags)
                            && !test_bit(In_sync, &rdev->flags)
                            && !rdev_set_badblocks(rdev, sh->sector,
                                                   RAID5_STRIPE_SECTORS(conf), 0))
                                abort = 1;
                }
        }
        md_done_sync(conf->mddev, RAID5_STRIPE_SECTORS(conf));

        if (abort)
                md_sync_error(conf->mddev);
}

static int want_replace(struct stripe_head *sh, int disk_idx)
{
        struct md_rdev *rdev;
        int rv = 0;

        rdev = sh->raid_conf->disks[disk_idx].replacement;
        if (rdev
            && !test_bit(Faulty, &rdev->flags)
            && !test_bit(In_sync, &rdev->flags)
            && (rdev->recovery_offset <= sh->sector
                || rdev->mddev->resync_offset <= sh->sector))
                rv = 1;
        return rv;
}

static int need_this_block(struct stripe_head *sh, struct stripe_head_state *s,
                           int disk_idx, int disks)
{
        struct r5dev *dev = &sh->dev[disk_idx];
        struct r5dev *fdev[2] = { &sh->dev[s->failed_num[0]],
                                  &sh->dev[s->failed_num[1]] };
        struct mddev *mddev = sh->raid_conf->mddev;
        bool force_rcw = false;
        int i;

        if (sh->raid_conf->rmw_level == PARITY_DISABLE_RMW ||
            (mddev->bitmap_ops && mddev->bitmap_ops->blocks_synced &&
             !mddev->bitmap_ops->blocks_synced(mddev, sh->sector)))
                force_rcw = true;

        if (test_bit(R5_LOCKED, &dev->flags) ||
            test_bit(R5_UPTODATE, &dev->flags))
                /* No point reading this as we already have it or have
                 * decided to get it.
                 */
                return 0;

        if (dev->toread ||
            (dev->towrite && !test_bit(R5_OVERWRITE, &dev->flags)))
                /* We need this block to directly satisfy a request */
                return 1;

        if (s->syncing || s->expanding ||
            (s->replacing && want_replace(sh, disk_idx)))
                /* When syncing, or expanding we read everything.
                 * When replacing, we need the replaced block.
                 */
                return 1;

        if ((s->failed >= 1 && fdev[0]->toread) ||
            (s->failed >= 2 && fdev[1]->toread))
                /* If we want to read from a failed device, then
                 * we need to actually read every other device.
                 */
                return 1;

        /* Sometimes neither read-modify-write nor reconstruct-write
         * cycles can work.  In those cases we read every block we
         * can.  Then the parity-update is certain to have enough to
         * work with.
         * This can only be a problem when we need to write something,
         * and some device has failed.  If either of those tests
         * fail we need look no further.
         */
        if (!s->failed || !s->to_write)
                return 0;

        if (test_bit(R5_Insync, &dev->flags) &&
            !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
                /* Pre-reads at not permitted until after short delay
                 * to gather multiple requests.  However if this
                 * device is no Insync, the block could only be computed
                 * and there is no need to delay that.
                 */
                return 0;

        for (i = 0; i < s->failed && i < 2; i++) {
                if (fdev[i]->towrite &&
                    !test_bit(R5_UPTODATE, &fdev[i]->flags) &&
                    !test_bit(R5_OVERWRITE, &fdev[i]->flags))
                        /* If we have a partial write to a failed
                         * device, then we will need to reconstruct
                         * the content of that device, so all other
                         * devices must be read.
                         */
                        return 1;

                if (s->failed >= 2 &&
                    (fdev[i]->towrite ||
                     s->failed_num[i] == sh->pd_idx ||
                     s->failed_num[i] == sh->qd_idx) &&
                    !test_bit(R5_UPTODATE, &fdev[i]->flags))
                        /* In max degraded raid6, If the failed disk is P, Q,
                         * or we want to read the failed disk, we need to do
                         * reconstruct-write.
                         */
                        force_rcw = true;
        }

        /* If we are forced to do a reconstruct-write, because parity
         * cannot be trusted and we are currently recovering it, there
         * is extra need to be careful.
         * If one of the devices that we would need to read, because
         * it is not being overwritten (and maybe not written at all)
         * is missing/faulty, then we need to read everything we can.
         */
        if (!force_rcw &&
            sh->sector < sh->raid_conf->mddev->resync_offset)
                /* reconstruct-write isn't being forced */
                return 0;
        for (i = 0; i < s->failed && i < 2; i++) {
                if (s->failed_num[i] != sh->pd_idx &&
                    s->failed_num[i] != sh->qd_idx &&
                    !test_bit(R5_UPTODATE, &fdev[i]->flags) &&
                    !test_bit(R5_OVERWRITE, &fdev[i]->flags))
                        return 1;
        }

        return 0;
}

/* fetch_block - checks the given member device to see if its data needs
 * to be read or computed to satisfy a request.
 *
 * Returns 1 when no more member devices need to be checked, otherwise returns
 * 0 to tell the loop in handle_stripe_fill to continue
 */
static int fetch_block(struct stripe_head *sh, struct stripe_head_state *s,
                       int disk_idx, int disks)
{
        struct r5dev *dev = &sh->dev[disk_idx];

        /* is the data in this block needed, and can we get it? */
        if (need_this_block(sh, s, disk_idx, disks)) {
                /* we would like to get this block, possibly by computing it,
                 * otherwise read it if the backing disk is insync
                 */
                BUG_ON(test_bit(R5_Wantcompute, &dev->flags));
                BUG_ON(test_bit(R5_Wantread, &dev->flags));
                BUG_ON(sh->batch_head);

                /*
                 * In the raid6 case if the only non-uptodate disk is P
                 * then we already trusted P to compute the other failed
                 * drives. It is safe to compute rather than re-read P.
                 * In other cases we only compute blocks from failed
                 * devices, otherwise check/repair might fail to detect
                 * a real inconsistency.
                 */

                if ((s->uptodate == disks - 1) &&
                    ((sh->qd_idx >= 0 && sh->pd_idx == disk_idx) ||
                    (s->failed && (disk_idx == s->failed_num[0] ||
                                   disk_idx == s->failed_num[1])))) {
                        /* have disk failed, and we're requested to fetch it;
                         * do compute it
                         */
                        pr_debug("Computing stripe %llu block %d\n",
                               (unsigned long long)sh->sector, disk_idx);
                        set_bit(STRIPE_COMPUTE_RUN, &sh->state);
                        set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
                        set_bit(R5_Wantcompute, &dev->flags);
                        sh->ops.target = disk_idx;
                        sh->ops.target2 = -1; /* no 2nd target */
                        s->req_compute = 1;
                        /* Careful: from this point on 'uptodate' is in the eye
                         * of raid_run_ops which services 'compute' operations
                         * before writes. R5_Wantcompute flags a block that will
                         * be R5_UPTODATE by the time it is needed for a
                         * subsequent operation.
                         */
                        s->uptodate++;
                        return 1;
                } else if (s->uptodate == disks-2 && s->failed >= 2) {
                        /* Computing 2-failure is *very* expensive; only
                         * do it if failed >= 2
                         */
                        int other;
                        for (other = disks; other--; ) {
                                if (other == disk_idx)
                                        continue;
                                if (!test_bit(R5_UPTODATE,
                                      &sh->dev[other].flags))
                                        break;
                        }
                        BUG_ON(other < 0);
                        pr_debug("Computing stripe %llu blocks %d,%d\n",
                               (unsigned long long)sh->sector,
                               disk_idx, other);
                        set_bit(STRIPE_COMPUTE_RUN, &sh->state);
                        set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
                        set_bit(R5_Wantcompute, &sh->dev[disk_idx].flags);
                        set_bit(R5_Wantcompute, &sh->dev[other].flags);
                        sh->ops.target = disk_idx;
                        sh->ops.target2 = other;
                        s->uptodate += 2;
                        s->req_compute = 1;
                        return 1;
                } else if (test_bit(R5_Insync, &dev->flags)) {
                        set_bit(R5_LOCKED, &dev->flags);
                        set_bit(R5_Wantread, &dev->flags);
                        s->locked++;
                        pr_debug("Reading block %d (sync=%d)\n",
                                disk_idx, s->syncing);
                }
        }

        return 0;
}

/*
 * handle_stripe_fill - read or compute data to satisfy pending requests.
 */
static void handle_stripe_fill(struct stripe_head *sh,
                               struct stripe_head_state *s,
                               int disks)
{
        int i;

        /* look for blocks to read/compute, skip this if a compute
         * is already in flight, or if the stripe contents are in the
         * midst of changing due to a write
         */
        if (!test_bit(STRIPE_COMPUTE_RUN, &sh->state) && !sh->check_state &&
            !sh->reconstruct_state) {

                /*
                 * For degraded stripe with data in journal, do not handle
                 * read requests yet, instead, flush the stripe to raid
                 * disks first, this avoids handling complex rmw of write
                 * back cache (prexor with orig_page, and then xor with
                 * page) in the read path
                 */
                if (s->to_read && s->injournal && s->failed) {
                        if (test_bit(STRIPE_R5C_CACHING, &sh->state))
                                r5c_make_stripe_write_out(sh);
                        goto out;
                }

                for (i = disks; i--; )
                        if (fetch_block(sh, s, i, disks))
                                break;
        }
out:
        set_bit(STRIPE_HANDLE, &sh->state);
}

static void break_stripe_batch_list(struct stripe_head *head_sh,
                                    unsigned long handle_flags);
/* handle_stripe_clean_event
 * any written block on an uptodate or failed drive can be returned.
 * Note that if we 'wrote' to a failed drive, it will be UPTODATE, but
 * never LOCKED, so we don't need to test 'failed' directly.
 */
static void handle_stripe_clean_event(struct r5conf *conf,
        struct stripe_head *sh, int disks)
{
        int i;
        struct r5dev *dev;
        int discard_pending = 0;
        struct stripe_head *head_sh = sh;
        bool do_endio = false;

        for (i = disks; i--; )
                if (sh->dev[i].written) {
                        dev = &sh->dev[i];
                        if (!test_bit(R5_LOCKED, &dev->flags) &&
                            (test_bit(R5_UPTODATE, &dev->flags) ||
                             test_bit(R5_Discard, &dev->flags) ||
                             test_bit(R5_SkipCopy, &dev->flags))) {
                                /* We can return any write requests */
                                struct bio *wbi, *wbi2;
                                pr_debug("Return write for disc %d\n", i);
                                if (test_and_clear_bit(R5_Discard, &dev->flags))
                                        clear_bit(R5_UPTODATE, &dev->flags);
                                if (test_and_clear_bit(R5_SkipCopy, &dev->flags)) {
                                        WARN_ON(test_bit(R5_UPTODATE, &dev->flags));
                                }
                                do_endio = true;

returnbi:
                                dev->page = dev->orig_page;
                                wbi = dev->written;
                                dev->written = NULL;
                                while (wbi && wbi->bi_iter.bi_sector <
                                        dev->sector + RAID5_STRIPE_SECTORS(conf)) {
                                        wbi2 = r5_next_bio(conf, wbi, dev->sector);
                                        md_write_end(conf->mddev);
                                        bio_endio(wbi);
                                        wbi = wbi2;
                                }

                                if (head_sh->batch_head) {
                                        sh = list_first_entry(&sh->batch_list,
                                                              struct stripe_head,
                                                              batch_list);
                                        if (sh != head_sh) {
                                                dev = &sh->dev[i];
                                                goto returnbi;
                                        }
                                }
                                sh = head_sh;
                                dev = &sh->dev[i];
                        } else if (test_bit(R5_Discard, &dev->flags))
                                discard_pending = 1;
                }

        log_stripe_write_finished(sh);

        if (!discard_pending &&
            test_bit(R5_Discard, &sh->dev[sh->pd_idx].flags)) {
                int hash;
                clear_bit(R5_Discard, &sh->dev[sh->pd_idx].flags);
                clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
                if (sh->qd_idx >= 0) {
                        clear_bit(R5_Discard, &sh->dev[sh->qd_idx].flags);
                        clear_bit(R5_UPTODATE, &sh->dev[sh->qd_idx].flags);
                }
                /* now that discard is done we can proceed with any sync */
                clear_bit(STRIPE_DISCARD, &sh->state);
                /*
                 * SCSI discard will change some bio fields and the stripe has
                 * no updated data, so remove it from hash list and the stripe
                 * will be reinitialized
                 */
unhash:
                hash = sh->hash_lock_index;
                spin_lock_irq(conf->hash_locks + hash);
                remove_hash(sh);
                spin_unlock_irq(conf->hash_locks + hash);
                if (head_sh->batch_head) {
                        sh = list_first_entry(&sh->batch_list,
                                              struct stripe_head, batch_list);
                        if (sh != head_sh)
                                        goto unhash;
                }
                sh = head_sh;

                if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state))
                        set_bit(STRIPE_HANDLE, &sh->state);

        }

        if (test_and_clear_bit(STRIPE_FULL_WRITE, &sh->state))
                if (atomic_dec_and_test(&conf->pending_full_writes))
                        md_wakeup_thread(conf->mddev->thread);

        if (head_sh->batch_head && do_endio)
                break_stripe_batch_list(head_sh, STRIPE_EXPAND_SYNC_FLAGS);
}

/*
 * For RMW in write back cache, we need extra page in prexor to store the
 * old data. This page is stored in dev->orig_page.
 *
 * This function checks whether we have data for prexor. The exact logic
 * is:
 *       R5_UPTODATE && (!R5_InJournal || R5_OrigPageUPTDODATE)
 */
static inline bool uptodate_for_rmw(struct r5dev *dev)
{
        return (test_bit(R5_UPTODATE, &dev->flags)) &&
                (!test_bit(R5_InJournal, &dev->flags) ||
                 test_bit(R5_OrigPageUPTDODATE, &dev->flags));
}

static int handle_stripe_dirtying(struct r5conf *conf,
                                  struct stripe_head *sh,
                                  struct stripe_head_state *s,
                                  int disks)
{
        int rmw = 0, rcw = 0, i;
        struct mddev *mddev = conf->mddev;
        sector_t resync_offset = mddev->resync_offset;

        /* Check whether resync is now happening or should start.
         * If yes, then the array is dirty (after unclean shutdown or
         * initial creation), so parity in some stripes might be inconsistent.
         * In this case, we need to always do reconstruct-write, to ensure
         * that in case of drive failure or read-error correction, we
         * generate correct data from the parity.
         */
        if (conf->rmw_level == PARITY_DISABLE_RMW ||
            (resync_offset < MaxSector && sh->sector >= resync_offset &&
             s->failed == 0)) {
                /* Calculate the real rcw later - for now make it
                 * look like rcw is cheaper
                 */
                rcw = 1; rmw = 2;
                pr_debug("force RCW rmw_level=%u, resync_offset=%llu sh->sector=%llu\n",
                         conf->rmw_level, (unsigned long long)resync_offset,
                         (unsigned long long)sh->sector);
        } else if (mddev->bitmap_ops && mddev->bitmap_ops->blocks_synced &&
                   !mddev->bitmap_ops->blocks_synced(mddev, sh->sector)) {
                /* The initial recover is not done, must read everything */
                rcw = 1; rmw = 2;
                pr_debug("force RCW by lazy recovery, sh->sector=%llu\n",
                         sh->sector);
        } else for (i = disks; i--; ) {
                /* would I have to read this buffer for read_modify_write */
                struct r5dev *dev = &sh->dev[i];
                if (((dev->towrite && !delay_towrite(conf, dev, s)) ||
                     i == sh->pd_idx || i == sh->qd_idx ||
                     test_bit(R5_InJournal, &dev->flags)) &&
                    !test_bit(R5_LOCKED, &dev->flags) &&
                    !(uptodate_for_rmw(dev) ||
                      test_bit(R5_Wantcompute, &dev->flags))) {
                        if (test_bit(R5_Insync, &dev->flags))
                                rmw++;
                        else
                                rmw += 2*disks;  /* cannot read it */
                }
                /* Would I have to read this buffer for reconstruct_write */
                if (!test_bit(R5_OVERWRITE, &dev->flags) &&
                    i != sh->pd_idx && i != sh->qd_idx &&
                    !test_bit(R5_LOCKED, &dev->flags) &&
                    !(test_bit(R5_UPTODATE, &dev->flags) ||
                      test_bit(R5_Wantcompute, &dev->flags))) {
                        if (test_bit(R5_Insync, &dev->flags))
                                rcw++;
                        else
                                rcw += 2*disks;
                }
        }

        pr_debug("for sector %llu state 0x%lx, rmw=%d rcw=%d\n",
                 (unsigned long long)sh->sector, sh->state, rmw, rcw);
        set_bit(STRIPE_HANDLE, &sh->state);
        if ((rmw < rcw || (rmw == rcw && conf->rmw_level == PARITY_PREFER_RMW)) && rmw > 0) {
                /* prefer read-modify-write, but need to get some data */
                mddev_add_trace_msg(mddev, "raid5 rmw %llu %d",
                                sh->sector, rmw);

                for (i = disks; i--; ) {
                        struct r5dev *dev = &sh->dev[i];
                        if (test_bit(R5_InJournal, &dev->flags) &&
                            dev->page == dev->orig_page &&
                            !test_bit(R5_LOCKED, &sh->dev[sh->pd_idx].flags)) {
                                /* alloc page for prexor */
                                struct page *p = alloc_page(GFP_NOIO);

                                if (p) {
                                        dev->orig_page = p;
                                        continue;
                                }

                                /*
                                 * alloc_page() failed, try use
                                 * disk_info->extra_page
                                 */
                                if (!test_and_set_bit(R5C_EXTRA_PAGE_IN_USE,
                                                      &conf->cache_state)) {
                                        r5c_use_extra_page(sh);
                                        break;
                                }

                                /* extra_page in use, add to delayed_list */
                                set_bit(STRIPE_DELAYED, &sh->state);
                                s->waiting_extra_page = 1;
                                return -EAGAIN;
                        }
                }

                for (i = disks; i--; ) {
                        struct r5dev *dev = &sh->dev[i];
                        if (((dev->towrite && !delay_towrite(conf, dev, s)) ||
                             i == sh->pd_idx || i == sh->qd_idx ||
                             test_bit(R5_InJournal, &dev->flags)) &&
                            !test_bit(R5_LOCKED, &dev->flags) &&
                            !(uptodate_for_rmw(dev) ||
                              test_bit(R5_Wantcompute, &dev->flags)) &&
                            test_bit(R5_Insync, &dev->flags)) {
                                if (test_bit(STRIPE_PREREAD_ACTIVE,
                                             &sh->state)) {
                                        pr_debug("Read_old block %d for r-m-w\n",
                                                 i);
                                        set_bit(R5_LOCKED, &dev->flags);
                                        set_bit(R5_Wantread, &dev->flags);
                                        s->locked++;
                                } else
                                        set_bit(STRIPE_DELAYED, &sh->state);
                        }
                }
        }
        if ((rcw < rmw || (rcw == rmw && conf->rmw_level != PARITY_PREFER_RMW)) && rcw > 0) {
                /* want reconstruct write, but need to get some data */
                int qread =0;
                rcw = 0;
                for (i = disks; i--; ) {
                        struct r5dev *dev = &sh->dev[i];
                        if (!test_bit(R5_OVERWRITE, &dev->flags) &&
                            i != sh->pd_idx && i != sh->qd_idx &&
                            !test_bit(R5_LOCKED, &dev->flags) &&
                            !(test_bit(R5_UPTODATE, &dev->flags) ||
                              test_bit(R5_Wantcompute, &dev->flags))) {
                                rcw++;
                                if (test_bit(R5_Insync, &dev->flags) &&
                                    test_bit(STRIPE_PREREAD_ACTIVE,
                                             &sh->state)) {
                                        pr_debug("Read_old block "
                                                "%d for Reconstruct\n", i);
                                        set_bit(R5_LOCKED, &dev->flags);
                                        set_bit(R5_Wantread, &dev->flags);
                                        s->locked++;
                                        qread++;
                                } else
                                        set_bit(STRIPE_DELAYED, &sh->state);
                        }
                }
                if (rcw && !mddev_is_dm(mddev))
                        blk_add_trace_msg(mddev->gendisk->queue,
                                "raid5 rcw %llu %d %d %d",
                                (unsigned long long)sh->sector, rcw, qread,
                                test_bit(STRIPE_DELAYED, &sh->state));
        }

        if (rcw > disks && rmw > disks &&
            !test_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
                set_bit(STRIPE_DELAYED, &sh->state);

        /* now if nothing is locked, and if we have enough data,
         * we can start a write request
         */
        /* since handle_stripe can be called at any time we need to handle the
         * case where a compute block operation has been submitted and then a
         * subsequent call wants to start a write request.  raid_run_ops only
         * handles the case where compute block and reconstruct are requested
         * simultaneously.  If this is not the case then new writes need to be
         * held off until the compute completes.
         */
        if ((s->req_compute || !test_bit(STRIPE_COMPUTE_RUN, &sh->state)) &&
            (s->locked == 0 && (rcw == 0 || rmw == 0) &&
             !test_bit(STRIPE_BIT_DELAY, &sh->state)))
                schedule_reconstruction(sh, s, rcw == 0, 0);
        return 0;
}

static void handle_parity_checks5(struct r5conf *conf, struct stripe_head *sh,
                                struct stripe_head_state *s, int disks)
{
        struct r5dev *dev = NULL;

        BUG_ON(sh->batch_head);
        set_bit(STRIPE_HANDLE, &sh->state);

        switch (sh->check_state) {
        case check_state_idle:
                /* start a new check operation if there are no failures */
                if (s->failed == 0) {
                        BUG_ON(s->uptodate != disks);
                        sh->check_state = check_state_run;
                        set_bit(STRIPE_OP_CHECK, &s->ops_request);
                        clear_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags);
                        s->uptodate--;
                        break;
                }
                dev = &sh->dev[s->failed_num[0]];
                fallthrough;
        case check_state_compute_result:
                sh->check_state = check_state_idle;
                if (!dev)
                        dev = &sh->dev[sh->pd_idx];

                /* check that a write has not made the stripe insync */
                if (test_bit(STRIPE_INSYNC, &sh->state))
                        break;

                /* either failed parity check, or recovery is happening */
                BUG_ON(!test_bit(R5_UPTODATE, &dev->flags));
                BUG_ON(s->uptodate != disks);

                set_bit(R5_LOCKED, &dev->flags);
                s->locked++;
                set_bit(R5_Wantwrite, &dev->flags);

                set_bit(STRIPE_INSYNC, &sh->state);
                break;
        case check_state_run:
                break; /* we will be called again upon completion */
        case check_state_check_result:
                sh->check_state = check_state_idle;

                /* if a failure occurred during the check operation, leave
                 * STRIPE_INSYNC not set and let the stripe be handled again
                 */
                if (s->failed)
                        break;

                /* handle a successful check operation, if parity is correct
                 * we are done.  Otherwise update the mismatch count and repair
                 * parity if !MD_RECOVERY_CHECK
                 */
                if ((sh->ops.zero_sum_result & SUM_CHECK_P_RESULT) == 0)
                        /* parity is correct (on disc,
                         * not in buffer any more)
                         */
                        set_bit(STRIPE_INSYNC, &sh->state);
                else {
                        atomic64_add(RAID5_STRIPE_SECTORS(conf), &conf->mddev->resync_mismatches);
                        if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) {
                                /* don't try to repair!! */
                                set_bit(STRIPE_INSYNC, &sh->state);
                                pr_warn_ratelimited("%s: mismatch sector in range "
                                                    "%llu-%llu\n", mdname(conf->mddev),
                                                    (unsigned long long) sh->sector,
                                                    (unsigned long long) sh->sector +
                                                    RAID5_STRIPE_SECTORS(conf));
                        } else {
                                sh->check_state = check_state_compute_run;
                                set_bit(STRIPE_COMPUTE_RUN, &sh->state);
                                set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
                                set_bit(R5_Wantcompute,
                                        &sh->dev[sh->pd_idx].flags);
                                sh->ops.target = sh->pd_idx;
                                sh->ops.target2 = -1;
                                s->uptodate++;
                        }
                }
                break;
        case check_state_compute_run:
                break;
        default:
                pr_err("%s: unknown check_state: %d sector: %llu\n",
                       __func__, sh->check_state,
                       (unsigned long long) sh->sector);
                BUG();
        }
}

static void handle_parity_checks6(struct r5conf *conf, struct stripe_head *sh,
                                  struct stripe_head_state *s,
                                  int disks)
{
        int pd_idx = sh->pd_idx;
        int qd_idx = sh->qd_idx;
        struct r5dev *dev;

        BUG_ON(sh->batch_head);
        set_bit(STRIPE_HANDLE, &sh->state);

        BUG_ON(s->failed > 2);

        /* Want to check and possibly repair P and Q.
         * However there could be one 'failed' device, in which
         * case we can only check one of them, possibly using the
         * other to generate missing data
         */

        switch (sh->check_state) {
        case check_state_idle:
                /* start a new check operation if there are < 2 failures */
                if (s->failed == s->q_failed) {
                        /* The only possible failed device holds Q, so it
                         * makes sense to check P (If anything else were failed,
                         * we would have used P to recreate it).
                         */
                        sh->check_state = check_state_run;
                }
                if (!s->q_failed && s->failed < 2) {
                        /* Q is not failed, and we didn't use it to generate
                         * anything, so it makes sense to check it
                         */
                        if (sh->check_state == check_state_run)
                                sh->check_state = check_state_run_pq;
                        else
                                sh->check_state = check_state_run_q;
                }

                /* discard potentially stale zero_sum_result */
                sh->ops.zero_sum_result = 0;

                if (sh->check_state == check_state_run) {
                        /* async_xor_zero_sum destroys the contents of P */
                        clear_bit(R5_UPTODATE, &sh->dev[pd_idx].flags);
                        s->uptodate--;
                }
                if (sh->check_state >= check_state_run &&
                    sh->check_state <= check_state_run_pq) {
                        /* async_syndrome_zero_sum preserves P and Q, so
                         * no need to mark them !uptodate here
                         */
                        set_bit(STRIPE_OP_CHECK, &s->ops_request);
                        break;
                }

                /* we have 2-disk failure */
                BUG_ON(s->failed != 2);
                fallthrough;
        case check_state_compute_result:
                sh->check_state = check_state_idle;

                /* check that a write has not made the stripe insync */
                if (test_bit(STRIPE_INSYNC, &sh->state))
                        break;

                /* now write out any block on a failed drive,
                 * or P or Q if they were recomputed
                 */
                dev = NULL;
                if (s->failed == 2) {
                        dev = &sh->dev[s->failed_num[1]];
                        s->locked++;
                        set_bit(R5_LOCKED, &dev->flags);
                        set_bit(R5_Wantwrite, &dev->flags);
                }
                if (s->failed >= 1) {
                        dev = &sh->dev[s->failed_num[0]];
                        s->locked++;
                        set_bit(R5_LOCKED, &dev->flags);
                        set_bit(R5_Wantwrite, &dev->flags);
                }
                if (sh->ops.zero_sum_result & SUM_CHECK_P_RESULT) {
                        dev = &sh->dev[pd_idx];
                        s->locked++;
                        set_bit(R5_LOCKED, &dev->flags);
                        set_bit(R5_Wantwrite, &dev->flags);
                }
                if (sh->ops.zero_sum_result & SUM_CHECK_Q_RESULT) {
                        dev = &sh->dev[qd_idx];
                        s->locked++;
                        set_bit(R5_LOCKED, &dev->flags);
                        set_bit(R5_Wantwrite, &dev->flags);
                }
                if (WARN_ONCE(dev && !test_bit(R5_UPTODATE, &dev->flags),
                              "%s: disk%td not up to date\n",
                              mdname(conf->mddev),
                              dev - (struct r5dev *) &sh->dev)) {
                        clear_bit(R5_LOCKED, &dev->flags);
                        clear_bit(R5_Wantwrite, &dev->flags);
                        s->locked--;
                }

                set_bit(STRIPE_INSYNC, &sh->state);
                break;
        case check_state_run:
        case check_state_run_q:
        case check_state_run_pq:
                break; /* we will be called again upon completion */
        case check_state_check_result:
                sh->check_state = check_state_idle;

                /* handle a successful check operation, if parity is correct
                 * we are done.  Otherwise update the mismatch count and repair
                 * parity if !MD_RECOVERY_CHECK
                 */
                if (sh->ops.zero_sum_result == 0) {
                        /* both parities are correct */
                        if (!s->failed)
                                set_bit(STRIPE_INSYNC, &sh->state);
                        else {
                                /* in contrast to the raid5 case we can validate
                                 * parity, but still have a failure to write
                                 * back
                                 */
                                sh->check_state = check_state_compute_result;
                                /* Returning at this point means that we may go
                                 * off and bring p and/or q uptodate again so
                                 * we make sure to check zero_sum_result again
                                 * to verify if p or q need writeback
                                 */
                        }
                } else {
                        atomic64_add(RAID5_STRIPE_SECTORS(conf), &conf->mddev->resync_mismatches);
                        if (test_bit(MD_RECOVERY_CHECK, &conf->mddev->recovery)) {
                                /* don't try to repair!! */
                                set_bit(STRIPE_INSYNC, &sh->state);
                                pr_warn_ratelimited("%s: mismatch sector in range "
                                                    "%llu-%llu\n", mdname(conf->mddev),
                                                    (unsigned long long) sh->sector,
                                                    (unsigned long long) sh->sector +
                                                    RAID5_STRIPE_SECTORS(conf));
                        } else {
                                int *target = &sh->ops.target;

                                sh->ops.target = -1;
                                sh->ops.target2 = -1;
                                sh->check_state = check_state_compute_run;
                                set_bit(STRIPE_COMPUTE_RUN, &sh->state);
                                set_bit(STRIPE_OP_COMPUTE_BLK, &s->ops_request);
                                if (sh->ops.zero_sum_result & SUM_CHECK_P_RESULT) {
                                        set_bit(R5_Wantcompute,
                                                &sh->dev[pd_idx].flags);
                                        *target = pd_idx;
                                        target = &sh->ops.target2;
                                        s->uptodate++;
                                }
                                if (sh->ops.zero_sum_result & SUM_CHECK_Q_RESULT) {
                                        set_bit(R5_Wantcompute,
                                                &sh->dev[qd_idx].flags);
                                        *target = qd_idx;
                                        s->uptodate++;
                                }
                        }
                }
                break;
        case check_state_compute_run:
                break;
        default:
                pr_warn("%s: unknown check_state: %d sector: %llu\n",
                        __func__, sh->check_state,
                        (unsigned long long) sh->sector);
                BUG();
        }
}

static void handle_stripe_expansion(struct r5conf *conf, struct stripe_head *sh)
{
        int i;

        /* We have read all the blocks in this stripe and now we need to
         * copy some of them into a target stripe for expand.
         */
        struct dma_async_tx_descriptor *tx = NULL;
        BUG_ON(sh->batch_head);
        clear_bit(STRIPE_EXPAND_SOURCE, &sh->state);
        for (i = 0; i < sh->disks; i++)
                if (i != sh->pd_idx && i != sh->qd_idx) {
                        int dd_idx, j;
                        struct stripe_head *sh2;
                        struct async_submit_ctl submit;

                        sector_t bn = raid5_compute_blocknr(sh, i, 1);
                        sector_t s = raid5_compute_sector(conf, bn, 0,
                                                          &dd_idx, NULL);
                        sh2 = raid5_get_active_stripe(conf, NULL, s,
                                R5_GAS_NOBLOCK | R5_GAS_NOQUIESCE);
                        if (sh2 == NULL)
                                /* so far only the early blocks of this stripe
                                 * have been requested.  When later blocks
                                 * get requested, we will try again
                                 */
                                continue;
                        if (!test_bit(STRIPE_EXPANDING, &sh2->state) ||
                           test_bit(R5_Expanded, &sh2->dev[dd_idx].flags)) {
                                /* must have already done this block */
                                raid5_release_stripe(sh2);
                                continue;
                        }

                        /* place all the copies on one channel */
                        init_async_submit(&submit, 0, tx, NULL, NULL, NULL);
                        tx = async_memcpy(sh2->dev[dd_idx].page,
                                          sh->dev[i].page, sh2->dev[dd_idx].offset,
                                          sh->dev[i].offset, RAID5_STRIPE_SIZE(conf),
                                          &submit);

                        set_bit(R5_Expanded, &sh2->dev[dd_idx].flags);
                        set_bit(R5_UPTODATE, &sh2->dev[dd_idx].flags);
                        for (j = 0; j < conf->raid_disks; j++)
                                if (j != sh2->pd_idx &&
                                    j != sh2->qd_idx &&
                                    !test_bit(R5_Expanded, &sh2->dev[j].flags))
                                        break;
                        if (j == conf->raid_disks) {
                                set_bit(STRIPE_EXPAND_READY, &sh2->state);
                                set_bit(STRIPE_HANDLE, &sh2->state);
                        }
                        raid5_release_stripe(sh2);

                }
        /* done submitting copies, wait for them to complete */
        async_tx_quiesce(&tx);
}

/*
 * handle_stripe - do things to a stripe.
 *
 * We lock the stripe by setting STRIPE_ACTIVE and then examine the
 * state of various bits to see what needs to be done.
 * Possible results:
 *    return some read requests which now have data
 *    return some write requests which are safely on storage
 *    schedule a read on some buffers
 *    schedule a write of some buffers
 *    return confirmation of parity correctness
 *
 */

static void analyse_stripe(struct stripe_head *sh, struct stripe_head_state *s)
{
        struct r5conf *conf = sh->raid_conf;
        int disks = sh->disks;
        struct r5dev *dev;
        int i;
        int do_recovery = 0;

        memset(s, 0, sizeof(*s));

        s->expanding = test_bit(STRIPE_EXPAND_SOURCE, &sh->state) && !sh->batch_head;
        s->expanded = test_bit(STRIPE_EXPAND_READY, &sh->state) && !sh->batch_head;
        s->failed_num[0] = -1;
        s->failed_num[1] = -1;
        s->log_failed = r5l_log_disk_error(conf);

        /* Now to look around and see what can be done */
        for (i=disks; i--; ) {
                struct md_rdev *rdev;
                int is_bad = 0;

                dev = &sh->dev[i];

                pr_debug("check %d: state 0x%lx read %p write %p written %p\n",
                         i, dev->flags,
                         dev->toread, dev->towrite, dev->written);
                /* maybe we can reply to a read
                 *
                 * new wantfill requests are only permitted while
                 * ops_complete_biofill is guaranteed to be inactive
                 */
                if (test_bit(R5_UPTODATE, &dev->flags) && dev->toread &&
                    !test_bit(STRIPE_BIOFILL_RUN, &sh->state))
                        set_bit(R5_Wantfill, &dev->flags);

                /* now count some things */
                if (test_bit(R5_LOCKED, &dev->flags))
                        s->locked++;
                if (test_bit(R5_UPTODATE, &dev->flags))
                        s->uptodate++;
                if (test_bit(R5_Wantcompute, &dev->flags)) {
                        s->compute++;
                        BUG_ON(s->compute > 2);
                }

                if (test_bit(R5_Wantfill, &dev->flags))
                        s->to_fill++;
                else if (dev->toread)
                        s->to_read++;
                if (dev->towrite) {
                        s->to_write++;
                        if (!test_bit(R5_OVERWRITE, &dev->flags))
                                s->non_overwrite++;
                }
                if (dev->written)
                        s->written++;
                /* Prefer to use the replacement for reads, but only
                 * if it is recovered enough and has no bad blocks.
                 */
                rdev = conf->disks[i].replacement;
                if (rdev && !test_bit(Faulty, &rdev->flags) &&
                    rdev->recovery_offset >= sh->sector + RAID5_STRIPE_SECTORS(conf) &&
                    !rdev_has_badblock(rdev, sh->sector,
                                       RAID5_STRIPE_SECTORS(conf)))
                        set_bit(R5_ReadRepl, &dev->flags);
                else {
                        if (rdev && !test_bit(Faulty, &rdev->flags))
                                set_bit(R5_NeedReplace, &dev->flags);
                        else
                                clear_bit(R5_NeedReplace, &dev->flags);
                        rdev = conf->disks[i].rdev;
                        clear_bit(R5_ReadRepl, &dev->flags);
                }
                if (rdev && test_bit(Faulty, &rdev->flags))
                        rdev = NULL;
                if (rdev) {
                        is_bad = rdev_has_badblock(rdev, sh->sector,
                                                   RAID5_STRIPE_SECTORS(conf));
                        if (s->blocked_rdev == NULL) {
                                if (is_bad < 0)
                                        set_bit(BlockedBadBlocks, &rdev->flags);
                                if (rdev_blocked(rdev)) {
                                        s->blocked_rdev = rdev;
                                        atomic_inc(&rdev->nr_pending);
                                }
                        }
                }
                clear_bit(R5_Insync, &dev->flags);
                if (!rdev)
                        /* Not in-sync */;
                else if (is_bad) {
                        /* also not in-sync */
                        if (!test_bit(WriteErrorSeen, &rdev->flags) &&
                            test_bit(R5_UPTODATE, &dev->flags)) {
                                /* treat as in-sync, but with a read error
                                 * which we can now try to correct
                                 */
                                set_bit(R5_Insync, &dev->flags);
                                set_bit(R5_ReadError, &dev->flags);
                        }
                } else if (test_bit(In_sync, &rdev->flags))
                        set_bit(R5_Insync, &dev->flags);
                else if (sh->sector + RAID5_STRIPE_SECTORS(conf) <=
                         rdev->recovery_offset) {
                        /*
                         * in sync if:
                         *  - normal IO, or
                         *  - resync IO that is not lazy recovery
                         *
                         * For lazy recovery, we have to mark the rdev without
                         * In_sync as failed, to build initial xor data.
                         */
                        if (!test_bit(STRIPE_SYNCING, &sh->state) ||
                            !test_bit(MD_RECOVERY_LAZY_RECOVER,
                                      &conf->mddev->recovery))
                                set_bit(R5_Insync, &dev->flags);
                } else if (test_bit(R5_UPTODATE, &dev->flags) &&
                         test_bit(R5_Expanded, &dev->flags))
                        /* If we've reshaped into here, we assume it is Insync.
                         * We will shortly update recovery_offset to make
                         * it official.
                         */
                        set_bit(R5_Insync, &dev->flags);

                if (test_bit(R5_WriteError, &dev->flags)) {
                        /* This flag does not apply to '.replacement'
                         * only to .rdev, so make sure to check that*/
                        struct md_rdev *rdev2 = conf->disks[i].rdev;

                        if (rdev2 == rdev)
                                clear_bit(R5_Insync, &dev->flags);
                        if (rdev2 && !test_bit(Faulty, &rdev2->flags)) {
                                s->handle_bad_blocks = 1;
                                atomic_inc(&rdev2->nr_pending);
                        } else
                                clear_bit(R5_WriteError, &dev->flags);
                }
                if (test_bit(R5_MadeGood, &dev->flags)) {
                        /* This flag does not apply to '.replacement'
                         * only to .rdev, so make sure to check that*/
                        struct md_rdev *rdev2 = conf->disks[i].rdev;

                        if (rdev2 && !test_bit(Faulty, &rdev2->flags)) {
                                s->handle_bad_blocks = 1;
                                atomic_inc(&rdev2->nr_pending);
                        } else
                                clear_bit(R5_MadeGood, &dev->flags);
                }
                if (test_bit(R5_MadeGoodRepl, &dev->flags)) {
                        struct md_rdev *rdev2 = conf->disks[i].replacement;

                        if (rdev2 && !test_bit(Faulty, &rdev2->flags)) {
                                s->handle_bad_blocks = 1;
                                atomic_inc(&rdev2->nr_pending);
                        } else
                                clear_bit(R5_MadeGoodRepl, &dev->flags);
                }
                if (!test_bit(R5_Insync, &dev->flags)) {
                        /* The ReadError flag will just be confusing now */
                        clear_bit(R5_ReadError, &dev->flags);
                        clear_bit(R5_ReWrite, &dev->flags);
                }
                if (test_bit(R5_ReadError, &dev->flags))
                        clear_bit(R5_Insync, &dev->flags);
                if (!test_bit(R5_Insync, &dev->flags)) {
                        if (s->failed < 2)
                                s->failed_num[s->failed] = i;
                        s->failed++;
                        if (rdev && !test_bit(Faulty, &rdev->flags))
                                do_recovery = 1;
                        else if (!rdev) {
                                rdev = conf->disks[i].replacement;
                                if (rdev && !test_bit(Faulty, &rdev->flags))
                                        do_recovery = 1;
                        }
                }

                if (test_bit(R5_InJournal, &dev->flags))
                        s->injournal++;
                if (test_bit(R5_InJournal, &dev->flags) && dev->written)
                        s->just_cached++;
        }
        if (test_bit(STRIPE_SYNCING, &sh->state)) {
                /* If there is a failed device being replaced,
                 *     we must be recovering.
                 * else if we are after resync_offset, we must be syncing
                 * else if MD_RECOVERY_REQUESTED is set, we also are syncing.
                 * else we can only be replacing
                 * sync and recovery both need to read all devices, and so
                 * use the same flag.
                 */
                if (do_recovery ||
                    sh->sector >= conf->mddev->resync_offset ||
                    test_bit(MD_RECOVERY_REQUESTED, &(conf->mddev->recovery)))
                        s->syncing = 1;
                else
                        s->replacing = 1;
        }
}

/*
 * Return '1' if this is a member of batch, or '0' if it is a lone stripe or
 * a head which can now be handled.
 */
static int clear_batch_ready(struct stripe_head *sh)
{
        struct stripe_head *tmp;
        if (!test_and_clear_bit(STRIPE_BATCH_READY, &sh->state))
                return (sh->batch_head && sh->batch_head != sh);
        spin_lock(&sh->stripe_lock);
        if (!sh->batch_head) {
                spin_unlock(&sh->stripe_lock);
                return 0;
        }

        /*
         * this stripe could be added to a batch list before we check
         * BATCH_READY, skips it
         */
        if (sh->batch_head != sh) {
                spin_unlock(&sh->stripe_lock);
                return 1;
        }
        spin_lock(&sh->batch_lock);
        list_for_each_entry(tmp, &sh->batch_list, batch_list)
                clear_bit(STRIPE_BATCH_READY, &tmp->state);
        spin_unlock(&sh->batch_lock);
        spin_unlock(&sh->stripe_lock);

        /*
         * BATCH_READY is cleared, no new stripes can be added.
         * batch_list can be accessed without lock
         */
        return 0;
}

static void break_stripe_batch_list(struct stripe_head *head_sh,
                                    unsigned long handle_flags)
{
        struct stripe_head *sh, *next;
        int i;

        list_for_each_entry_safe(sh, next, &head_sh->batch_list, batch_list) {

                list_del_init(&sh->batch_list);

                WARN_ONCE(sh->state & ((1 << STRIPE_ACTIVE) |
                                          (1 << STRIPE_SYNCING) |
                                          (1 << STRIPE_REPLACED) |
                                          (1 << STRIPE_DELAYED) |
                                          (1 << STRIPE_BIT_DELAY) |
                                          (1 << STRIPE_FULL_WRITE) |
                                          (1 << STRIPE_BIOFILL_RUN) |
                                          (1 << STRIPE_COMPUTE_RUN)  |
                                          (1 << STRIPE_DISCARD) |
                                          (1 << STRIPE_BATCH_READY) |
                                          (1 << STRIPE_BATCH_ERR)),
                        "stripe state: %lx\n", sh->state);
                WARN_ONCE(head_sh->state & ((1 << STRIPE_DISCARD) |
                                              (1 << STRIPE_REPLACED)),
                        "head stripe state: %lx\n", head_sh->state);

                set_mask_bits(&sh->state, ~(STRIPE_EXPAND_SYNC_FLAGS |
                                            (1 << STRIPE_PREREAD_ACTIVE) |
                                            (1 << STRIPE_ON_UNPLUG_LIST)),
                              head_sh->state & (1 << STRIPE_INSYNC));

                sh->check_state = head_sh->check_state;
                sh->reconstruct_state = head_sh->reconstruct_state;
                spin_lock_irq(&sh->stripe_lock);
                sh->batch_head = NULL;
                spin_unlock_irq(&sh->stripe_lock);
                for (i = 0; i < sh->disks; i++) {
                        if (test_and_clear_bit(R5_Overlap, &sh->dev[i].flags))
                                wake_up_bit(&sh->dev[i].flags, R5_Overlap);
                        sh->dev[i].flags = head_sh->dev[i].flags &
                                (~((1 << R5_WriteError) | (1 << R5_Overlap)));
                }
                if (handle_flags == 0 ||
                    sh->state & handle_flags)
                        set_bit(STRIPE_HANDLE, &sh->state);
                raid5_release_stripe(sh);
        }
        spin_lock_irq(&head_sh->stripe_lock);
        head_sh->batch_head = NULL;
        spin_unlock_irq(&head_sh->stripe_lock);
        for (i = 0; i < head_sh->disks; i++)
                if (test_and_clear_bit(R5_Overlap, &head_sh->dev[i].flags))
                        wake_up_bit(&head_sh->dev[i].flags, R5_Overlap);
        if (head_sh->state & handle_flags)
                set_bit(STRIPE_HANDLE, &head_sh->state);
}

static void handle_stripe(struct stripe_head *sh)
{
        struct stripe_head_state s;
        struct r5conf *conf = sh->raid_conf;
        int i;
        int prexor;
        int disks = sh->disks;
        struct r5dev *pdev, *qdev;

        clear_bit(STRIPE_HANDLE, &sh->state);

        /*
         * handle_stripe should not continue handle the batched stripe, only
         * the head of batch list or lone stripe can continue. Otherwise we
         * could see break_stripe_batch_list warns about the STRIPE_ACTIVE
         * is set for the batched stripe.
         */
        if (clear_batch_ready(sh))
                return;

        if (test_and_set_bit_lock(STRIPE_ACTIVE, &sh->state)) {
                /* already being handled, ensure it gets handled
                 * again when current action finishes */
                set_bit(STRIPE_HANDLE, &sh->state);
                return;
        }

        if (test_and_clear_bit(STRIPE_BATCH_ERR, &sh->state))
                break_stripe_batch_list(sh, 0);

        if (test_bit(STRIPE_SYNC_REQUESTED, &sh->state) && !sh->batch_head) {
                spin_lock(&sh->stripe_lock);
                /*
                 * Cannot process 'sync' concurrently with 'discard'.
                 * Flush data in r5cache before 'sync'.
                 */
                if (!test_bit(STRIPE_R5C_PARTIAL_STRIPE, &sh->state) &&
                    !test_bit(STRIPE_R5C_FULL_STRIPE, &sh->state) &&
                    !test_bit(STRIPE_DISCARD, &sh->state) &&
                    test_and_clear_bit(STRIPE_SYNC_REQUESTED, &sh->state)) {
                        set_bit(STRIPE_SYNCING, &sh->state);
                        clear_bit(STRIPE_INSYNC, &sh->state);
                        clear_bit(STRIPE_REPLACED, &sh->state);
                }
                spin_unlock(&sh->stripe_lock);
        }
        clear_bit(STRIPE_DELAYED, &sh->state);

        pr_debug("handling stripe %llu, state=%#lx cnt=%d, "
                "pd_idx=%d, qd_idx=%d\n, check:%d, reconstruct:%d\n",
               (unsigned long long)sh->sector, sh->state,
               atomic_read(&sh->count), sh->pd_idx, sh->qd_idx,
               sh->check_state, sh->reconstruct_state);

        analyse_stripe(sh, &s);

        if (test_bit(STRIPE_LOG_TRAPPED, &sh->state))
                goto finish;

        if (s.handle_bad_blocks ||
            (md_is_rdwr(conf->mddev) &&
             test_bit(MD_SB_CHANGE_PENDING, &conf->mddev->sb_flags))) {
                set_bit(STRIPE_HANDLE, &sh->state);
                goto finish;
        }

        if (unlikely(s.blocked_rdev)) {
                if (s.syncing || s.expanding || s.expanded ||
                    s.replacing || s.to_write || s.written) {
                        set_bit(STRIPE_HANDLE, &sh->state);
                        goto finish;
                }
                /* There is nothing for the blocked_rdev to block */
                rdev_dec_pending(s.blocked_rdev, conf->mddev);
                s.blocked_rdev = NULL;
        }

        if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) {
                set_bit(STRIPE_OP_BIOFILL, &s.ops_request);
                set_bit(STRIPE_BIOFILL_RUN, &sh->state);
        }

        pr_debug("locked=%d uptodate=%d to_read=%d"
               " to_write=%d failed=%d failed_num=%d,%d\n",
               s.locked, s.uptodate, s.to_read, s.to_write, s.failed,
               s.failed_num[0], s.failed_num[1]);
        /*
         * check if the array has lost more than max_degraded devices and,
         * if so, some requests might need to be failed.
         *
         * When journal device failed (log_failed), we will only process
         * the stripe if there is data need write to raid disks
         */
        if (s.failed > conf->max_degraded ||
            (s.log_failed && s.injournal == 0)) {
                sh->check_state = 0;
                sh->reconstruct_state = 0;
                break_stripe_batch_list(sh, 0);
                if (s.to_read+s.to_write+s.written)
                        handle_failed_stripe(conf, sh, &s, disks);
                if (s.syncing + s.replacing)
                        handle_failed_sync(conf, sh, &s);
        }

        /* Now we check to see if any write operations have recently
         * completed
         */
        prexor = 0;
        if (sh->reconstruct_state == reconstruct_state_prexor_drain_result)
                prexor = 1;
        if (sh->reconstruct_state == reconstruct_state_drain_result ||
            sh->reconstruct_state == reconstruct_state_prexor_drain_result) {
                sh->reconstruct_state = reconstruct_state_idle;

                /* All the 'written' buffers and the parity block are ready to
                 * be written back to disk
                 */
                BUG_ON(!test_bit(R5_UPTODATE, &sh->dev[sh->pd_idx].flags) &&
                       !test_bit(R5_Discard, &sh->dev[sh->pd_idx].flags));
                BUG_ON(sh->qd_idx >= 0 &&
                       !test_bit(R5_UPTODATE, &sh->dev[sh->qd_idx].flags) &&
                       !test_bit(R5_Discard, &sh->dev[sh->qd_idx].flags));
                for (i = disks; i--; ) {
                        struct r5dev *dev = &sh->dev[i];
                        if (test_bit(R5_LOCKED, &dev->flags) &&
                                (i == sh->pd_idx || i == sh->qd_idx ||
                                 dev->written || test_bit(R5_InJournal,
                                                          &dev->flags))) {
                                pr_debug("Writing block %d\n", i);
                                set_bit(R5_Wantwrite, &dev->flags);
                                if (prexor)
                                        continue;
                                if (s.failed > 1)
                                        continue;
                                if (!test_bit(R5_Insync, &dev->flags) ||
                                    ((i == sh->pd_idx || i == sh->qd_idx)  &&
                                     s.failed == 0))
                                        set_bit(STRIPE_INSYNC, &sh->state);
                        }
                }
                if (test_and_clear_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
                        s.dec_preread_active = 1;
        }

        /*
         * might be able to return some write requests if the parity blocks
         * are safe, or on a failed drive
         */
        pdev = &sh->dev[sh->pd_idx];
        s.p_failed = (s.failed >= 1 && s.failed_num[0] == sh->pd_idx)
                || (s.failed >= 2 && s.failed_num[1] == sh->pd_idx);
        qdev = &sh->dev[sh->qd_idx];
        s.q_failed = (s.failed >= 1 && s.failed_num[0] == sh->qd_idx)
                || (s.failed >= 2 && s.failed_num[1] == sh->qd_idx)
                || conf->level < 6;

        if (s.written &&
            (s.p_failed || ((test_bit(R5_Insync, &pdev->flags)
                             && !test_bit(R5_LOCKED, &pdev->flags)
                             && (test_bit(R5_UPTODATE, &pdev->flags) ||
                                 test_bit(R5_Discard, &pdev->flags))))) &&
            (s.q_failed || ((test_bit(R5_Insync, &qdev->flags)
                             && !test_bit(R5_LOCKED, &qdev->flags)
                             && (test_bit(R5_UPTODATE, &qdev->flags) ||
                                 test_bit(R5_Discard, &qdev->flags))))))
                handle_stripe_clean_event(conf, sh, disks);

        if (s.just_cached)
                r5c_handle_cached_data_endio(conf, sh, disks);
        log_stripe_write_finished(sh);

        /* Now we might consider reading some blocks, either to check/generate
         * parity, or to satisfy requests
         * or to load a block that is being partially written.
         */
        if (s.to_read || s.non_overwrite
            || (s.to_write && s.failed)
            || (s.syncing && (s.uptodate + s.compute < disks))
            || s.replacing
            || s.expanding)
                handle_stripe_fill(sh, &s, disks);

        /*
         * When the stripe finishes full journal write cycle (write to journal
         * and raid disk), this is the clean up procedure so it is ready for
         * next operation.
         */
        r5c_finish_stripe_write_out(conf, sh, &s);

        /*
         * Now to consider new write requests, cache write back and what else,
         * if anything should be read.  We do not handle new writes when:
         * 1/ A 'write' operation (copy+xor) is already in flight.
         * 2/ A 'check' operation is in flight, as it may clobber the parity
         *    block.
         * 3/ A r5c cache log write is in flight.
         */

        if (!sh->reconstruct_state && !sh->check_state && !sh->log_io) {
                if (!r5c_is_writeback(conf->log)) {
                        if (s.to_write)
                                handle_stripe_dirtying(conf, sh, &s, disks);
                } else { /* write back cache */
                        int ret = 0;

                        /* First, try handle writes in caching phase */
                        if (s.to_write)
                                ret = r5c_try_caching_write(conf, sh, &s,
                                                            disks);
                        /*
                         * If caching phase failed: ret == -EAGAIN
                         *    OR
                         * stripe under reclaim: !caching && injournal
                         *
                         * fall back to handle_stripe_dirtying()
                         */
                        if (ret == -EAGAIN ||
                            /* stripe under reclaim: !caching && injournal */
                            (!test_bit(STRIPE_R5C_CACHING, &sh->state) &&
                             s.injournal > 0)) {
                                ret = handle_stripe_dirtying(conf, sh, &s,
                                                             disks);
                                if (ret == -EAGAIN)
                                        goto finish;
                        }
                }
        }

        /* maybe we need to check and possibly fix the parity for this stripe
         * Any reads will already have been scheduled, so we just see if enough
         * data is available.  The parity check is held off while parity
         * dependent operations are in flight.
         */
        if (sh->check_state ||
            (s.syncing && s.locked == 0 &&
             !test_bit(STRIPE_COMPUTE_RUN, &sh->state) &&
             !test_bit(STRIPE_INSYNC, &sh->state))) {
                if (conf->level == 6)
                        handle_parity_checks6(conf, sh, &s, disks);
                else
                        handle_parity_checks5(conf, sh, &s, disks);
        }

        if ((s.replacing || s.syncing) && s.locked == 0
            && !test_bit(STRIPE_COMPUTE_RUN, &sh->state)
            && !test_bit(STRIPE_REPLACED, &sh->state)) {
                /* Write out to replacement devices where possible */
                for (i = 0; i < conf->raid_disks; i++)
                        if (test_bit(R5_NeedReplace, &sh->dev[i].flags)) {
                                WARN_ON(!test_bit(R5_UPTODATE, &sh->dev[i].flags));
                                set_bit(R5_WantReplace, &sh->dev[i].flags);
                                set_bit(R5_LOCKED, &sh->dev[i].flags);
                                s.locked++;
                        }
                if (s.replacing)
                        set_bit(STRIPE_INSYNC, &sh->state);
                set_bit(STRIPE_REPLACED, &sh->state);
        }
        if ((s.syncing || s.replacing) && s.locked == 0 &&
            !test_bit(STRIPE_COMPUTE_RUN, &sh->state) &&
            test_bit(STRIPE_INSYNC, &sh->state)) {
                md_done_sync(conf->mddev, RAID5_STRIPE_SECTORS(conf));
                clear_bit(STRIPE_SYNCING, &sh->state);
                if (test_and_clear_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags))
                        wake_up_bit(&sh->dev[sh->pd_idx].flags, R5_Overlap);
        }

        /* If the failed drives are just a ReadError, then we might need
         * to progress the repair/check process
         */
        if (s.failed <= conf->max_degraded && !conf->mddev->ro)
                for (i = 0; i < s.failed; i++) {
                        struct r5dev *dev = &sh->dev[s.failed_num[i]];
                        if (test_bit(R5_ReadError, &dev->flags)
                            && !test_bit(R5_LOCKED, &dev->flags)
                            && test_bit(R5_UPTODATE, &dev->flags)
                                ) {
                                if (!test_bit(R5_ReWrite, &dev->flags)) {
                                        set_bit(R5_Wantwrite, &dev->flags);
                                        set_bit(R5_ReWrite, &dev->flags);
                                } else
                                        /* let's read it back */
                                        set_bit(R5_Wantread, &dev->flags);
                                set_bit(R5_LOCKED, &dev->flags);
                                s.locked++;
                        }
                }

        /* Finish reconstruct operations initiated by the expansion process */
        if (sh->reconstruct_state == reconstruct_state_result) {
                struct stripe_head *sh_src
                        = raid5_get_active_stripe(conf, NULL, sh->sector,
                                        R5_GAS_PREVIOUS | R5_GAS_NOBLOCK |
                                        R5_GAS_NOQUIESCE);
                if (sh_src && test_bit(STRIPE_EXPAND_SOURCE, &sh_src->state)) {
                        /* sh cannot be written until sh_src has been read.
                         * so arrange for sh to be delayed a little
                         */
                        set_bit(STRIPE_DELAYED, &sh->state);
                        set_bit(STRIPE_HANDLE, &sh->state);
                        if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE,
                                              &sh_src->state))
                                atomic_inc(&conf->preread_active_stripes);
                        raid5_release_stripe(sh_src);
                        goto finish;
                }
                if (sh_src)
                        raid5_release_stripe(sh_src);

                sh->reconstruct_state = reconstruct_state_idle;
                clear_bit(STRIPE_EXPANDING, &sh->state);
                for (i = conf->raid_disks; i--; ) {
                        set_bit(R5_Wantwrite, &sh->dev[i].flags);
                        set_bit(R5_LOCKED, &sh->dev[i].flags);
                        s.locked++;
                }
        }

        if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state) &&
            !sh->reconstruct_state) {
                /* Need to write out all blocks after computing parity */
                sh->disks = conf->raid_disks;
                stripe_set_idx(sh->sector, conf, 0, sh);
                schedule_reconstruction(sh, &s, 1, 1);
        } else if (s.expanded && !sh->reconstruct_state && s.locked == 0) {
                clear_bit(STRIPE_EXPAND_READY, &sh->state);
                atomic_dec(&conf->reshape_stripes);
                wake_up(&conf->wait_for_reshape);
                md_done_sync(conf->mddev, RAID5_STRIPE_SECTORS(conf));
        }

        if (s.expanding && s.locked == 0 &&
            !test_bit(STRIPE_COMPUTE_RUN, &sh->state))
                handle_stripe_expansion(conf, sh);

finish:
        /* wait for this device to become unblocked */
        if (unlikely(s.blocked_rdev)) {
                if (conf->mddev->external)
                        md_wait_for_blocked_rdev(s.blocked_rdev,
                                                 conf->mddev);
                else
                        /* Internal metadata will immediately
                         * be written by raid5d, so we don't
                         * need to wait here.
                         */
                        rdev_dec_pending(s.blocked_rdev,
                                         conf->mddev);
        }

        if (s.handle_bad_blocks)
                for (i = disks; i--; ) {
                        struct md_rdev *rdev;
                        struct r5dev *dev = &sh->dev[i];
                        if (test_and_clear_bit(R5_WriteError, &dev->flags)) {
                                /* We own a safe reference to the rdev */
                                rdev = conf->disks[i].rdev;
                                rdev_set_badblocks(rdev, sh->sector,
                                                   RAID5_STRIPE_SECTORS(conf), 0);
                                rdev_dec_pending(rdev, conf->mddev);
                        }
                        if (test_and_clear_bit(R5_MadeGood, &dev->flags)) {
                                rdev = conf->disks[i].rdev;
                                rdev_clear_badblocks(rdev, sh->sector,
                                                     RAID5_STRIPE_SECTORS(conf), 0);
                                rdev_dec_pending(rdev, conf->mddev);
                        }
                        if (test_and_clear_bit(R5_MadeGoodRepl, &dev->flags)) {
                                rdev = conf->disks[i].replacement;
                                if (!rdev)
                                        /* rdev have been moved down */
                                        rdev = conf->disks[i].rdev;
                                rdev_clear_badblocks(rdev, sh->sector,
                                                     RAID5_STRIPE_SECTORS(conf), 0);
                                rdev_dec_pending(rdev, conf->mddev);
                        }
                }

        if (s.ops_request)
                raid_run_ops(sh, s.ops_request);

        ops_run_io(sh, &s);

        if (s.dec_preread_active) {
                /* We delay this until after ops_run_io so that if make_request
                 * is waiting on a flush, it won't continue until the writes
                 * have actually been submitted.
                 */
                atomic_dec(&conf->preread_active_stripes);
                if (atomic_read(&conf->preread_active_stripes) <
                    IO_THRESHOLD)
                        md_wakeup_thread(conf->mddev->thread);
        }

        clear_bit_unlock(STRIPE_ACTIVE, &sh->state);
}

static void raid5_activate_delayed(struct r5conf *conf)
        __must_hold(&conf->device_lock)
{
        if (atomic_read(&conf->preread_active_stripes) < IO_THRESHOLD) {
                while (!list_empty(&conf->delayed_list)) {
                        struct list_head *l = conf->delayed_list.next;
                        struct stripe_head *sh;
                        sh = list_entry(l, struct stripe_head, lru);
                        list_del_init(l);
                        clear_bit(STRIPE_DELAYED, &sh->state);
                        if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
                                atomic_inc(&conf->preread_active_stripes);
                        list_add_tail(&sh->lru, &conf->hold_list);
                        raid5_wakeup_stripe_thread(sh);
                }
        }
}

static void activate_bit_delay(struct r5conf *conf,
                struct list_head *temp_inactive_list)
        __must_hold(&conf->device_lock)
{
        struct list_head head;
        list_add(&head, &conf->bitmap_list);
        list_del_init(&conf->bitmap_list);
        while (!list_empty(&head)) {
                struct stripe_head *sh = list_entry(head.next, struct stripe_head, lru);
                int hash;
                list_del_init(&sh->lru);
                atomic_inc(&sh->count);
                hash = sh->hash_lock_index;
                __release_stripe(conf, sh, &temp_inactive_list[hash]);
        }
}

static int in_chunk_boundary(struct mddev *mddev, struct bio *bio)
{
        struct r5conf *conf = mddev->private;
        sector_t sector = bio->bi_iter.bi_sector;
        unsigned int chunk_sectors;
        unsigned int bio_sectors = bio_sectors(bio);

        chunk_sectors = min(conf->chunk_sectors, conf->prev_chunk_sectors);
        return  chunk_sectors >=
                ((sector & (chunk_sectors - 1)) + bio_sectors);
}

/*
 *  add bio to the retry LIFO  ( in O(1) ... we are in interrupt )
 *  later sampled by raid5d.
 */
static void add_bio_to_retry(struct bio *bi,struct r5conf *conf)
{
        unsigned long flags;

        spin_lock_irqsave(&conf->device_lock, flags);

        bi->bi_next = conf->retry_read_aligned_list;
        conf->retry_read_aligned_list = bi;

        spin_unlock_irqrestore(&conf->device_lock, flags);
        md_wakeup_thread(conf->mddev->thread);
}

static struct bio *remove_bio_from_retry(struct r5conf *conf,
                                         unsigned int *offset)
{
        struct bio *bi;

        bi = conf->retry_read_aligned;
        if (bi) {
                *offset = conf->retry_read_offset;
                conf->retry_read_aligned = NULL;
                return bi;
        }
        bi = conf->retry_read_aligned_list;
        if(bi) {
                conf->retry_read_aligned_list = bi->bi_next;
                bi->bi_next = NULL;
                *offset = 0;
        }

        return bi;
}

/*
 *  The "raid5_align_endio" should check if the read succeeded and if it
 *  did, call bio_endio on the original bio (having bio_put the new bio
 *  first).
 *  If the read failed..
 */
static void raid5_align_endio(struct bio *bi)
{
        struct bio *raid_bi = bi->bi_private;
        struct md_rdev *rdev = (void *)raid_bi->bi_next;
        struct mddev *mddev = rdev->mddev;
        struct r5conf *conf = mddev->private;
        blk_status_t error = bi->bi_status;

        bio_put(bi);
        raid_bi->bi_next = NULL;
        rdev_dec_pending(rdev, conf->mddev);

        if (!error) {
                bio_endio(raid_bi);
                if (atomic_dec_and_test(&conf->active_aligned_reads))
                        wake_up(&conf->wait_for_quiescent);
                return;
        }

        pr_debug("raid5_align_endio : io error...handing IO for a retry\n");

        add_bio_to_retry(raid_bi, conf);
}

static int raid5_read_one_chunk(struct mddev *mddev, struct bio *raid_bio)
{
        struct r5conf *conf = mddev->private;
        struct bio *align_bio;
        struct md_rdev *rdev;
        sector_t sector, end_sector;
        int dd_idx;
        bool did_inc;

        if (!in_chunk_boundary(mddev, raid_bio)) {
                pr_debug("%s: non aligned\n", __func__);
                return 0;
        }

        sector = raid5_compute_sector(conf, raid_bio->bi_iter.bi_sector, 0,
                                      &dd_idx, NULL);
        end_sector = sector + bio_sectors(raid_bio);

        if (r5c_big_stripe_cached(conf, sector))
                return 0;

        rdev = conf->disks[dd_idx].replacement;
        if (!rdev || test_bit(Faulty, &rdev->flags) ||
            rdev->recovery_offset < end_sector) {
                rdev = conf->disks[dd_idx].rdev;
                if (!rdev)
                        return 0;
                if (test_bit(Faulty, &rdev->flags) ||
                    !(test_bit(In_sync, &rdev->flags) ||
                      rdev->recovery_offset >= end_sector))
                        return 0;
        }

        atomic_inc(&rdev->nr_pending);

        if (rdev_has_badblock(rdev, sector, bio_sectors(raid_bio))) {
                rdev_dec_pending(rdev, mddev);
                return 0;
        }

        md_account_bio(mddev, &raid_bio);
        raid_bio->bi_next = (void *)rdev;

        align_bio = bio_alloc_clone(rdev->bdev, raid_bio, GFP_NOIO,
                                    &mddev->bio_set);
        align_bio->bi_end_io = raid5_align_endio;
        align_bio->bi_private = raid_bio;
        align_bio->bi_iter.bi_sector = sector;

        /* No reshape active, so we can trust rdev->data_offset */
        align_bio->bi_iter.bi_sector += rdev->data_offset;

        did_inc = false;
        if (conf->quiesce == 0) {
                atomic_inc(&conf->active_aligned_reads);
                did_inc = true;
        }
        /* need a memory barrier to detect the race with raid5_quiesce() */
        if (!did_inc || smp_load_acquire(&conf->quiesce) != 0) {
                /* quiesce is in progress, so we need to undo io activation and wait
                 * for it to finish
                 */
                if (did_inc && atomic_dec_and_test(&conf->active_aligned_reads))
                        wake_up(&conf->wait_for_quiescent);
                spin_lock_irq(&conf->device_lock);
                wait_event_lock_irq(conf->wait_for_quiescent, conf->quiesce == 0,
                                    conf->device_lock);
                atomic_inc(&conf->active_aligned_reads);
                spin_unlock_irq(&conf->device_lock);
        }

        mddev_trace_remap(mddev, align_bio, raid_bio->bi_iter.bi_sector);
        submit_bio_noacct(align_bio);
        return 1;
}

static struct bio *chunk_aligned_read(struct mddev *mddev, struct bio *raid_bio)
{
        sector_t sector = raid_bio->bi_iter.bi_sector;
        unsigned chunk_sects = mddev->chunk_sectors;
        unsigned sectors = chunk_sects - (sector & (chunk_sects-1));

        if (sectors < bio_sectors(raid_bio)) {
                struct r5conf *conf = mddev->private;

                raid_bio = bio_submit_split_bioset(raid_bio, sectors,
                                                   &conf->bio_split);
                if (!raid_bio)
                        return NULL;
        }

        if (!raid5_read_one_chunk(mddev, raid_bio))
                return raid_bio;

        return NULL;
}

/* __get_priority_stripe - get the next stripe to process
 *
 * Full stripe writes are allowed to pass preread active stripes up until
 * the bypass_threshold is exceeded.  In general the bypass_count
 * increments when the handle_list is handled before the hold_list; however, it
 * will not be incremented when STRIPE_IO_STARTED is sampled set signifying a
 * stripe with in flight i/o.  The bypass_count will be reset when the
 * head of the hold_list has changed, i.e. the head was promoted to the
 * handle_list.
 */
static struct stripe_head *__get_priority_stripe(struct r5conf *conf, int group)
        __must_hold(&conf->device_lock)
{
        struct stripe_head *sh, *tmp;
        struct list_head *handle_list = NULL;
        struct r5worker_group *wg;
        bool second_try = !r5c_is_writeback(conf->log) &&
                !r5l_log_disk_error(conf);
        bool try_loprio = test_bit(R5C_LOG_TIGHT, &conf->cache_state) ||
                r5l_log_disk_error(conf);

again:
        wg = NULL;
        sh = NULL;
        if (conf->worker_cnt_per_group == 0) {
                handle_list = try_loprio ? &conf->loprio_list :
                                        &conf->handle_list;
        } else if (group != ANY_GROUP) {
                handle_list = try_loprio ? &conf->worker_groups[group].loprio_list :
                                &conf->worker_groups[group].handle_list;
                wg = &conf->worker_groups[group];
        } else {
                int i;
                for (i = 0; i < conf->group_cnt; i++) {
                        handle_list = try_loprio ? &conf->worker_groups[i].loprio_list :
                                &conf->worker_groups[i].handle_list;
                        wg = &conf->worker_groups[i];
                        if (!list_empty(handle_list))
                                break;
                }
        }

        pr_debug("%s: handle: %s hold: %s full_writes: %d bypass_count: %d\n",
                  __func__,
                  list_empty(handle_list) ? "empty" : "busy",
                  list_empty(&conf->hold_list) ? "empty" : "busy",
                  atomic_read(&conf->pending_full_writes), conf->bypass_count);

        if (!list_empty(handle_list)) {
                sh = list_entry(handle_list->next, typeof(*sh), lru);

                if (list_empty(&conf->hold_list))
                        conf->bypass_count = 0;
                else if (!test_bit(STRIPE_IO_STARTED, &sh->state)) {
                        if (conf->hold_list.next == conf->last_hold)
                                conf->bypass_count++;
                        else {
                                conf->last_hold = conf->hold_list.next;
                                conf->bypass_count -= conf->bypass_threshold;
                                if (conf->bypass_count < 0)
                                        conf->bypass_count = 0;
                        }
                }
        } else if (!list_empty(&conf->hold_list) &&
                   ((conf->bypass_threshold &&
                     conf->bypass_count > conf->bypass_threshold) ||
                    atomic_read(&conf->pending_full_writes) == 0)) {

                list_for_each_entry(tmp, &conf->hold_list,  lru) {
                        if (conf->worker_cnt_per_group == 0 ||
                            group == ANY_GROUP ||
                            !cpu_online(tmp->cpu) ||
                            cpu_to_group(tmp->cpu) == group) {
                                sh = tmp;
                                break;
                        }
                }

                if (sh) {
                        conf->bypass_count -= conf->bypass_threshold;
                        if (conf->bypass_count < 0)
                                conf->bypass_count = 0;
                }
                wg = NULL;
        }

        if (!sh) {
                if (second_try)
                        return NULL;
                second_try = true;
                try_loprio = !try_loprio;
                goto again;
        }

        if (wg) {
                wg->stripes_cnt--;
                sh->group = NULL;
        }
        list_del_init(&sh->lru);
        BUG_ON(atomic_inc_return(&sh->count) != 1);
        return sh;
}

struct raid5_plug_cb {
        struct blk_plug_cb      cb;
        struct list_head        list;
        struct list_head        temp_inactive_list[NR_STRIPE_HASH_LOCKS];
};

static void raid5_unplug(struct blk_plug_cb *blk_cb, bool from_schedule)
{
        struct raid5_plug_cb *cb = container_of(
                blk_cb, struct raid5_plug_cb, cb);
        struct stripe_head *sh;
        struct mddev *mddev = cb->cb.data;
        struct r5conf *conf = mddev->private;
        int cnt = 0;
        int hash;

        if (cb->list.next && !list_empty(&cb->list)) {
                spin_lock_irq(&conf->device_lock);
                while (!list_empty(&cb->list)) {
                        sh = list_first_entry(&cb->list, struct stripe_head, lru);
                        list_del_init(&sh->lru);
                        /*
                         * avoid race release_stripe_plug() sees
                         * STRIPE_ON_UNPLUG_LIST clear but the stripe
                         * is still in our list
                         */
                        smp_mb__before_atomic();
                        clear_bit(STRIPE_ON_UNPLUG_LIST, &sh->state);
                        /*
                         * STRIPE_ON_RELEASE_LIST could be set here. In that
                         * case, the count is always > 1 here
                         */
                        hash = sh->hash_lock_index;
                        __release_stripe(conf, sh, &cb->temp_inactive_list[hash]);
                        cnt++;
                }
                spin_unlock_irq(&conf->device_lock);
        }
        release_inactive_stripe_list(conf, cb->temp_inactive_list,
                                     NR_STRIPE_HASH_LOCKS);
        if (!mddev_is_dm(mddev))
                trace_block_unplug(mddev->gendisk->queue, cnt, !from_schedule);
        kfree(cb);
}

static void release_stripe_plug(struct mddev *mddev,
                                struct stripe_head *sh)
{
        struct blk_plug_cb *blk_cb = blk_check_plugged(
                raid5_unplug, mddev,
                sizeof(struct raid5_plug_cb));
        struct raid5_plug_cb *cb;

        if (!blk_cb) {
                raid5_release_stripe(sh);
                return;
        }

        cb = container_of(blk_cb, struct raid5_plug_cb, cb);

        if (cb->list.next == NULL) {
                int i;
                INIT_LIST_HEAD(&cb->list);
                for (i = 0; i < NR_STRIPE_HASH_LOCKS; i++)
                        INIT_LIST_HEAD(cb->temp_inactive_list + i);
        }

        if (!test_and_set_bit(STRIPE_ON_UNPLUG_LIST, &sh->state))
                list_add_tail(&sh->lru, &cb->list);
        else
                raid5_release_stripe(sh);
}

static void make_discard_request(struct mddev *mddev, struct bio *bi)
{
        struct r5conf *conf = mddev->private;
        sector_t logical_sector, last_sector;
        struct stripe_head *sh;
        int stripe_sectors;

        /* We need to handle this when io_uring supports discard/trim */
        if (WARN_ON_ONCE(bi->bi_opf & REQ_NOWAIT))
                return;

        if (mddev->reshape_position != MaxSector)
                /* Skip discard while reshape is happening */
                return;

        logical_sector = bi->bi_iter.bi_sector & ~((sector_t)RAID5_STRIPE_SECTORS(conf)-1);
        last_sector = bio_end_sector(bi);

        bi->bi_next = NULL;

        stripe_sectors = conf->chunk_sectors *
                (conf->raid_disks - conf->max_degraded);
        logical_sector = DIV_ROUND_UP_SECTOR_T(logical_sector,
                                               stripe_sectors);
        sector_div(last_sector, stripe_sectors);

        logical_sector *= conf->chunk_sectors;
        last_sector *= conf->chunk_sectors;

        for (; logical_sector < last_sector;
             logical_sector += RAID5_STRIPE_SECTORS(conf)) {
                DEFINE_WAIT(w);
                int d;
        again:
                sh = raid5_get_active_stripe(conf, NULL, logical_sector, 0);
                set_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags);
                if (test_bit(STRIPE_SYNCING, &sh->state)) {
                        raid5_release_stripe(sh);
                        wait_on_bit(&sh->dev[sh->pd_idx].flags, R5_Overlap,
                                    TASK_UNINTERRUPTIBLE);
                        goto again;
                }
                clear_bit(R5_Overlap, &sh->dev[sh->pd_idx].flags);
                spin_lock_irq(&sh->stripe_lock);
                for (d = 0; d < conf->raid_disks; d++) {
                        if (d == sh->pd_idx || d == sh->qd_idx)
                                continue;
                        if (sh->dev[d].towrite || sh->dev[d].toread) {
                                set_bit(R5_Overlap, &sh->dev[d].flags);
                                spin_unlock_irq(&sh->stripe_lock);
                                raid5_release_stripe(sh);
                                wait_on_bit(&sh->dev[d].flags, R5_Overlap,
                                            TASK_UNINTERRUPTIBLE);
                                goto again;
                        }
                }
                set_bit(STRIPE_DISCARD, &sh->state);
                sh->overwrite_disks = 0;
                for (d = 0; d < conf->raid_disks; d++) {
                        if (d == sh->pd_idx || d == sh->qd_idx)
                                continue;
                        sh->dev[d].towrite = bi;
                        set_bit(R5_OVERWRITE, &sh->dev[d].flags);
                        bio_inc_remaining(bi);
                        md_write_inc(mddev, bi);
                        sh->overwrite_disks++;
                }
                spin_unlock_irq(&sh->stripe_lock);
                if (conf->mddev->bitmap) {
                        sh->bm_seq = conf->seq_flush + 1;
                        set_bit(STRIPE_BIT_DELAY, &sh->state);
                }

                set_bit(STRIPE_HANDLE, &sh->state);
                clear_bit(STRIPE_DELAYED, &sh->state);
                if (!test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
                        atomic_inc(&conf->preread_active_stripes);
                release_stripe_plug(mddev, sh);
        }

        bio_endio(bi);
}

static bool ahead_of_reshape(struct mddev *mddev, sector_t sector,
                             sector_t reshape_sector)
{
        return mddev->reshape_backwards ? sector < reshape_sector :
                                          sector >= reshape_sector;
}

static bool range_ahead_of_reshape(struct mddev *mddev, sector_t min,
                                   sector_t max, sector_t reshape_sector)
{
        return mddev->reshape_backwards ? max < reshape_sector :
                                          min >= reshape_sector;
}

static bool stripe_ahead_of_reshape(struct mddev *mddev, struct r5conf *conf,
                                    struct stripe_head *sh)
{
        sector_t max_sector = 0, min_sector = MaxSector;
        bool ret = false;
        int dd_idx;

        for (dd_idx = 0; dd_idx < sh->disks; dd_idx++) {
                if (dd_idx == sh->pd_idx || dd_idx == sh->qd_idx)
                        continue;

                min_sector = min(min_sector, sh->dev[dd_idx].sector);
                max_sector = max(max_sector, sh->dev[dd_idx].sector);
        }

        spin_lock_irq(&conf->device_lock);

        if (!range_ahead_of_reshape(mddev, min_sector, max_sector,
                                     conf->reshape_progress))
                /* mismatch, need to try again */
                ret = true;

        spin_unlock_irq(&conf->device_lock);

        return ret;
}

static int add_all_stripe_bios(struct r5conf *conf,
                struct stripe_request_ctx *ctx, struct stripe_head *sh,
                struct bio *bi, int forwrite, int previous)
{
        int dd_idx;

        spin_lock_irq(&sh->stripe_lock);

        for (dd_idx = 0; dd_idx < sh->disks; dd_idx++) {
                struct r5dev *dev = &sh->dev[dd_idx];

                if (dd_idx == sh->pd_idx || dd_idx == sh->qd_idx)
                        continue;

                if (dev->sector < ctx->first_sector ||
                    dev->sector >= ctx->last_sector)
                        continue;

                if (stripe_bio_overlaps(sh, bi, dd_idx, forwrite)) {
                        set_bit(R5_Overlap, &dev->flags);
                        spin_unlock_irq(&sh->stripe_lock);
                        raid5_release_stripe(sh);
                        /* release batch_last before wait to avoid risk of deadlock */
                        if (ctx->batch_last) {
                                raid5_release_stripe(ctx->batch_last);
                                ctx->batch_last = NULL;
                        }
                        md_wakeup_thread(conf->mddev->thread);
                        wait_on_bit(&dev->flags, R5_Overlap, TASK_UNINTERRUPTIBLE);
                        return 0;
                }
        }

        for (dd_idx = 0; dd_idx < sh->disks; dd_idx++) {
                struct r5dev *dev = &sh->dev[dd_idx];

                if (dd_idx == sh->pd_idx || dd_idx == sh->qd_idx)
                        continue;

                if (dev->sector < ctx->first_sector ||
                    dev->sector >= ctx->last_sector)
                        continue;

                __add_stripe_bio(sh, bi, dd_idx, forwrite, previous);
                clear_bit((dev->sector - ctx->first_sector) >>
                          RAID5_STRIPE_SHIFT(conf), ctx->sectors_to_do);
        }

        spin_unlock_irq(&sh->stripe_lock);
        return 1;
}

enum reshape_loc {
        LOC_NO_RESHAPE,
        LOC_AHEAD_OF_RESHAPE,
        LOC_INSIDE_RESHAPE,
        LOC_BEHIND_RESHAPE,
};

static enum reshape_loc get_reshape_loc(struct mddev *mddev,
                struct r5conf *conf, sector_t logical_sector)
{
        sector_t reshape_progress, reshape_safe;

        if (likely(conf->reshape_progress == MaxSector))
                return LOC_NO_RESHAPE;
        /*
         * Spinlock is needed as reshape_progress may be
         * 64bit on a 32bit platform, and so it might be
         * possible to see a half-updated value
         * Of course reshape_progress could change after
         * the lock is dropped, so once we get a reference
         * to the stripe that we think it is, we will have
         * to check again.
         */
        spin_lock_irq(&conf->device_lock);
        reshape_progress = conf->reshape_progress;
        reshape_safe = conf->reshape_safe;
        spin_unlock_irq(&conf->device_lock);
        if (reshape_progress == MaxSector)
                return LOC_NO_RESHAPE;
        if (ahead_of_reshape(mddev, logical_sector, reshape_progress))
                return LOC_AHEAD_OF_RESHAPE;
        if (ahead_of_reshape(mddev, logical_sector, reshape_safe))
                return LOC_INSIDE_RESHAPE;
        return LOC_BEHIND_RESHAPE;
}

static void raid5_bitmap_sector(struct mddev *mddev, sector_t *offset,
                                unsigned long *sectors)
{
        struct r5conf *conf = mddev->private;
        sector_t start = *offset;
        sector_t end = start + *sectors;
        sector_t prev_start = start;
        sector_t prev_end = end;
        int sectors_per_chunk;
        enum reshape_loc loc;
        int dd_idx;

        sectors_per_chunk = conf->chunk_sectors *
                (conf->raid_disks - conf->max_degraded);
        start = round_down(start, sectors_per_chunk);
        end = round_up(end, sectors_per_chunk);

        start = raid5_compute_sector(conf, start, 0, &dd_idx, NULL);
        end = raid5_compute_sector(conf, end, 0, &dd_idx, NULL);

        /*
         * For LOC_INSIDE_RESHAPE, this IO will wait for reshape to make
         * progress, hence it's the same as LOC_BEHIND_RESHAPE.
         */
        loc = get_reshape_loc(mddev, conf, prev_start);
        if (likely(loc != LOC_AHEAD_OF_RESHAPE)) {
                *offset = start;
                *sectors = end - start;
                return;
        }

        sectors_per_chunk = conf->prev_chunk_sectors *
                (conf->previous_raid_disks - conf->max_degraded);
        prev_start = round_down(prev_start, sectors_per_chunk);
        prev_end = round_down(prev_end, sectors_per_chunk);

        prev_start = raid5_compute_sector(conf, prev_start, 1, &dd_idx, NULL);
        prev_end = raid5_compute_sector(conf, prev_end, 1, &dd_idx, NULL);

        /*
         * for LOC_AHEAD_OF_RESHAPE, reshape can make progress before this IO
         * is handled in make_stripe_request(), we can't know this here hence
         * we set bits for both.
         */
        *offset = min(start, prev_start);
        *sectors = max(end, prev_end) - *offset;
}

static enum stripe_result make_stripe_request(struct mddev *mddev,
                struct r5conf *conf, struct stripe_request_ctx *ctx,
                sector_t logical_sector, struct bio *bi)
{
        const int rw = bio_data_dir(bi);
        enum stripe_result ret;
        struct stripe_head *sh;
        enum reshape_loc loc;
        sector_t new_sector;
        int previous = 0, flags = 0;
        int seq, dd_idx;

        seq = read_seqcount_begin(&conf->gen_lock);
        loc = get_reshape_loc(mddev, conf, logical_sector);
        if (loc == LOC_INSIDE_RESHAPE) {
                ret = STRIPE_SCHEDULE_AND_RETRY;
                goto out;
        }
        if (loc == LOC_AHEAD_OF_RESHAPE)
                previous = 1;

        new_sector = raid5_compute_sector(conf, logical_sector, previous,
                                          &dd_idx, NULL);
        pr_debug("raid456: %s, sector %llu logical %llu\n", __func__,
                 new_sector, logical_sector);

        if (previous)
                flags |= R5_GAS_PREVIOUS;
        if (bi->bi_opf & REQ_RAHEAD)
                flags |= R5_GAS_NOBLOCK;
        sh = raid5_get_active_stripe(conf, ctx, new_sector, flags);
        if (unlikely(!sh)) {
                /* cannot get stripe, just give-up */
                bi->bi_status = BLK_STS_IOERR;
                return STRIPE_FAIL;
        }

        if (unlikely(previous) &&
            stripe_ahead_of_reshape(mddev, conf, sh)) {
                /*
                 * Expansion moved on while waiting for a stripe.
                 * Expansion could still move past after this
                 * test, but as we are holding a reference to
                 * 'sh', we know that if that happens,
                 *  STRIPE_EXPANDING will get set and the expansion
                 * won't proceed until we finish with the stripe.
                 */
                ret = STRIPE_SCHEDULE_AND_RETRY;
                goto out_release;
        }

        if (read_seqcount_retry(&conf->gen_lock, seq)) {
                /* Might have got the wrong stripe_head by accident */
                ret = STRIPE_RETRY;
                goto out_release;
        }

        if (test_bit(STRIPE_EXPANDING, &sh->state)) {
                md_wakeup_thread(mddev->thread);
                ret = STRIPE_SCHEDULE_AND_RETRY;
                goto out_release;
        }

        if (!add_all_stripe_bios(conf, ctx, sh, bi, rw, previous)) {
                ret = STRIPE_RETRY;
                goto out;
        }

        if (stripe_can_batch(sh)) {
                stripe_add_to_batch_list(conf, sh, ctx->batch_last);
                if (ctx->batch_last)
                        raid5_release_stripe(ctx->batch_last);
                atomic_inc(&sh->count);
                ctx->batch_last = sh;
        }

        if (ctx->do_flush) {
                set_bit(STRIPE_R5C_PREFLUSH, &sh->state);
                /* we only need flush for one stripe */
                ctx->do_flush = false;
        }

        set_bit(STRIPE_HANDLE, &sh->state);
        clear_bit(STRIPE_DELAYED, &sh->state);
        if ((!sh->batch_head || sh == sh->batch_head) &&
            (bi->bi_opf & REQ_SYNC) &&
            !test_and_set_bit(STRIPE_PREREAD_ACTIVE, &sh->state))
                atomic_inc(&conf->preread_active_stripes);

        release_stripe_plug(mddev, sh);
        return STRIPE_SUCCESS;

out_release:
        raid5_release_stripe(sh);
out:
        if (ret == STRIPE_SCHEDULE_AND_RETRY && reshape_interrupted(mddev)) {
                bi->bi_status = BLK_STS_RESOURCE;
                ret = STRIPE_WAIT_RESHAPE;
                pr_err_ratelimited("dm-raid456: io across reshape position while reshape can't make progress");
        }
        return ret;
}

/*
 * If the bio covers multiple data disks, find sector within the bio that has
 * the lowest chunk offset in the first chunk.
 */
static sector_t raid5_bio_lowest_chunk_sector(struct r5conf *conf,
                                              struct bio *bi)
{
        int sectors_per_chunk = conf->chunk_sectors;
        int raid_disks = conf->raid_disks;
        int dd_idx;
        struct stripe_head sh;
        unsigned int chunk_offset;
        sector_t r_sector = bi->bi_iter.bi_sector & ~((sector_t)RAID5_STRIPE_SECTORS(conf)-1);
        sector_t sector;

        /* We pass in fake stripe_head to get back parity disk numbers */
        sector = raid5_compute_sector(conf, r_sector, 0, &dd_idx, &sh);
        chunk_offset = sector_div(sector, sectors_per_chunk);
        if (sectors_per_chunk - chunk_offset >= bio_sectors(bi))
                return r_sector;
        /*
         * Bio crosses to the next data disk. Check whether it's in the same
         * chunk.
         */
        dd_idx++;
        while (dd_idx == sh.pd_idx || dd_idx == sh.qd_idx)
                dd_idx++;
        if (dd_idx >= raid_disks)
                return r_sector;
        return r_sector + sectors_per_chunk - chunk_offset;
}

static bool raid5_make_request(struct mddev *mddev, struct bio * bi)
{
        DEFINE_WAIT_FUNC(wait, woken_wake_function);
        struct r5conf *conf = mddev->private;
        const int rw = bio_data_dir(bi);
        struct stripe_request_ctx *ctx;
        sector_t logical_sector;
        enum stripe_result res;
        int s, stripe_cnt;
        bool on_wq;

        if (unlikely(bi->bi_opf & REQ_PREFLUSH)) {
                int ret = log_handle_flush_request(conf, bi);

                if (ret == 0)
                        return true;
                if (ret == -ENODEV) {
                        if (md_flush_request(mddev, bi))
                                return true;
                }
                /* ret == -EAGAIN, fallback */
        }

        md_write_start(mddev, bi);
        /*
         * If array is degraded, better not do chunk aligned read because
         * later we might have to read it again in order to reconstruct
         * data on failed drives.
         */
        if (rw == READ && mddev->degraded == 0 &&
            mddev->reshape_position == MaxSector) {
                bi = chunk_aligned_read(mddev, bi);
                if (!bi)
                        return true;
        }

        if (unlikely(bio_op(bi) == REQ_OP_DISCARD)) {
                make_discard_request(mddev, bi);
                md_write_end(mddev);
                return true;
        }

        logical_sector = bi->bi_iter.bi_sector & ~((sector_t)RAID5_STRIPE_SECTORS(conf)-1);
        bi->bi_next = NULL;

        ctx = mempool_alloc(conf->ctx_pool, GFP_NOIO);
        memset(ctx, 0, conf->ctx_size);
        ctx->first_sector = logical_sector;
        ctx->last_sector = bio_end_sector(bi);
        /*
         * if r5l_handle_flush_request() didn't clear REQ_PREFLUSH,
         * we need to flush journal device
         */
        if (unlikely(bi->bi_opf & REQ_PREFLUSH))
                ctx->do_flush = true;

        stripe_cnt = DIV_ROUND_UP_SECTOR_T(ctx->last_sector - logical_sector,
                                           RAID5_STRIPE_SECTORS(conf));
        bitmap_set(ctx->sectors_to_do, 0, stripe_cnt);

        pr_debug("raid456: %s, logical %llu to %llu\n", __func__,
                 bi->bi_iter.bi_sector, ctx->last_sector);

        /* Bail out if conflicts with reshape and REQ_NOWAIT is set */
        if ((bi->bi_opf & REQ_NOWAIT) &&
            get_reshape_loc(mddev, conf, logical_sector) == LOC_INSIDE_RESHAPE) {
                bio_wouldblock_error(bi);
                if (rw == WRITE)
                        md_write_end(mddev);
                mempool_free(ctx, conf->ctx_pool);
                return true;
        }
        md_account_bio(mddev, &bi);

        /*
         * Lets start with the stripe with the lowest chunk offset in the first
         * chunk. That has the best chances of creating IOs adjacent to
         * previous IOs in case of sequential IO and thus creates the most
         * sequential IO pattern. We don't bother with the optimization when
         * reshaping as the performance benefit is not worth the complexity.
         */
        if (likely(conf->reshape_progress == MaxSector)) {
                logical_sector = raid5_bio_lowest_chunk_sector(conf, bi);
                on_wq = false;
        } else {
                add_wait_queue(&conf->wait_for_reshape, &wait);
                on_wq = true;
        }
        s = (logical_sector - ctx->first_sector) >> RAID5_STRIPE_SHIFT(conf);

        while (1) {
                res = make_stripe_request(mddev, conf, ctx, logical_sector,
                                          bi);
                if (res == STRIPE_FAIL || res == STRIPE_WAIT_RESHAPE)
                        break;

                if (res == STRIPE_RETRY)
                        continue;

                if (res == STRIPE_SCHEDULE_AND_RETRY) {
                        WARN_ON_ONCE(!on_wq);
                        /*
                         * Must release the reference to batch_last before
                         * scheduling and waiting for work to be done,
                         * otherwise the batch_last stripe head could prevent
                         * raid5_activate_delayed() from making progress
                         * and thus deadlocking.
                         */
                        if (ctx->batch_last) {
                                raid5_release_stripe(ctx->batch_last);
                                ctx->batch_last = NULL;
                        }

                        wait_woken(&wait, TASK_UNINTERRUPTIBLE,
                                   MAX_SCHEDULE_TIMEOUT);
                        continue;
                }

                s = find_next_bit_wrap(ctx->sectors_to_do, stripe_cnt, s);
                if (s == stripe_cnt)
                        break;

                logical_sector = ctx->first_sector +
                        (s << RAID5_STRIPE_SHIFT(conf));
        }
        if (unlikely(on_wq))
                remove_wait_queue(&conf->wait_for_reshape, &wait);

        if (ctx->batch_last)
                raid5_release_stripe(ctx->batch_last);

        if (rw == WRITE)
                md_write_end(mddev);

        mempool_free(ctx, conf->ctx_pool);
        if (res == STRIPE_WAIT_RESHAPE) {
                md_free_cloned_bio(bi);
                return false;
        }

        bio_endio(bi);
        return true;
}

static sector_t raid5_size(struct mddev *mddev, sector_t sectors, int raid_disks);

static sector_t reshape_request(struct mddev *mddev, sector_t sector_nr, int *skipped)
{
        /* reshaping is quite different to recovery/resync so it is
         * handled quite separately ... here.
         *
         * On each call to sync_request, we gather one chunk worth of
         * destination stripes and flag them as expanding.
         * Then we find all the source stripes and request reads.
         * As the reads complete, handle_stripe will copy the data
         * into the destination stripe and release that stripe.
         */
        struct r5conf *conf = mddev->private;
        struct stripe_head *sh;
        struct md_rdev *rdev;
        sector_t first_sector, last_sector;
        int raid_disks = conf->previous_raid_disks;
        int data_disks = raid_disks - conf->max_degraded;
        int new_data_disks = conf->raid_disks - conf->max_degraded;
        int i;
        int dd_idx;
        sector_t writepos, readpos, safepos;
        sector_t stripe_addr;
        int reshape_sectors;
        struct list_head stripes;
        sector_t retn;

        if (sector_nr == 0) {
                /* If restarting in the middle, skip the initial sectors */
                if (mddev->reshape_backwards &&
                    conf->reshape_progress < raid5_size(mddev, 0, 0)) {
                        sector_nr = raid5_size(mddev, 0, 0)
                                - conf->reshape_progress;
                } else if (mddev->reshape_backwards &&
                           conf->reshape_progress == MaxSector) {
                        /* shouldn't happen, but just in case, finish up.*/
                        sector_nr = MaxSector;
                } else if (!mddev->reshape_backwards &&
                           conf->reshape_progress > 0)
                        sector_nr = conf->reshape_progress;
                sector_div(sector_nr, new_data_disks);
                if (sector_nr) {
                        mddev->curr_resync_completed = sector_nr;
                        sysfs_notify_dirent_safe(mddev->sysfs_completed);
                        *skipped = 1;
                        retn = sector_nr;
                        goto finish;
                }
        }

        /* We need to process a full chunk at a time.
         * If old and new chunk sizes differ, we need to process the
         * largest of these
         */

        reshape_sectors = max(conf->chunk_sectors, conf->prev_chunk_sectors);

        /* We update the metadata at least every 10 seconds, or when
         * the data about to be copied would over-write the source of
         * the data at the front of the range.  i.e. one new_stripe
         * along from reshape_progress new_maps to after where
         * reshape_safe old_maps to
         */
        writepos = conf->reshape_progress;
        sector_div(writepos, new_data_disks);
        readpos = conf->reshape_progress;
        sector_div(readpos, data_disks);
        safepos = conf->reshape_safe;
        sector_div(safepos, data_disks);
        if (mddev->reshape_backwards) {
                if (WARN_ON(writepos < reshape_sectors))
                        return MaxSector;

                writepos -= reshape_sectors;
                readpos += reshape_sectors;
                safepos += reshape_sectors;
        } else {
                writepos += reshape_sectors;
                /* readpos and safepos are worst-case calculations.
                 * A negative number is overly pessimistic, and causes
                 * obvious problems for unsigned storage.  So clip to 0.
                 */
                readpos -= min_t(sector_t, reshape_sectors, readpos);
                safepos -= min_t(sector_t, reshape_sectors, safepos);
        }

        /* Having calculated the 'writepos' possibly use it
         * to set 'stripe_addr' which is where we will write to.
         */
        if (mddev->reshape_backwards) {
                if (WARN_ON(conf->reshape_progress == 0))
                        return MaxSector;

                stripe_addr = writepos;
                if (WARN_ON((mddev->dev_sectors &
                    ~((sector_t)reshape_sectors - 1)) -
                    reshape_sectors - stripe_addr != sector_nr))
                        return MaxSector;
        } else {
                if (WARN_ON(writepos != sector_nr + reshape_sectors))
                        return MaxSector;

                stripe_addr = sector_nr;
        }

        /* 'writepos' is the most advanced device address we might write.
         * 'readpos' is the least advanced device address we might read.
         * 'safepos' is the least address recorded in the metadata as having
         *     been reshaped.
         * If there is a min_offset_diff, these are adjusted either by
         * increasing the safepos/readpos if diff is negative, or
         * increasing writepos if diff is positive.
         * If 'readpos' is then behind 'writepos', there is no way that we can
         * ensure safety in the face of a crash - that must be done by userspace
         * making a backup of the data.  So in that case there is no particular
         * rush to update metadata.
         * Otherwise if 'safepos' is behind 'writepos', then we really need to
         * update the metadata to advance 'safepos' to match 'readpos' so that
         * we can be safe in the event of a crash.
         * So we insist on updating metadata if safepos is behind writepos and
         * readpos is beyond writepos.
         * In any case, update the metadata every 10 seconds.
         * Maybe that number should be configurable, but I'm not sure it is
         * worth it.... maybe it could be a multiple of safemode_delay???
         */
        if (conf->min_offset_diff < 0) {
                safepos += -conf->min_offset_diff;
                readpos += -conf->min_offset_diff;
        } else
                writepos += conf->min_offset_diff;

        if ((mddev->reshape_backwards
             ? (safepos > writepos && readpos < writepos)
             : (safepos < writepos && readpos > writepos)) ||
            time_after(jiffies, conf->reshape_checkpoint + 10*HZ)) {
                /* Cannot proceed until we've updated the superblock... */
                wait_event(conf->wait_for_reshape,
                           atomic_read(&conf->reshape_stripes)==0
                           || test_bit(MD_RECOVERY_INTR, &mddev->recovery));
                if (atomic_read(&conf->reshape_stripes) != 0)
                        return 0;
                mddev->reshape_position = conf->reshape_progress;
                mddev->curr_resync_completed = sector_nr;
                if (!mddev->reshape_backwards)
                        /* Can update recovery_offset */
                        rdev_for_each(rdev, mddev)
                                if (rdev->raid_disk >= 0 &&
                                    !test_bit(Journal, &rdev->flags) &&
                                    !test_bit(In_sync, &rdev->flags) &&
                                    rdev->recovery_offset < sector_nr)
                                        rdev->recovery_offset = sector_nr;

                conf->reshape_checkpoint = jiffies;
                set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
                md_wakeup_thread(mddev->thread);
                wait_event(mddev->sb_wait, mddev->sb_flags == 0 ||
                           test_bit(MD_RECOVERY_INTR, &mddev->recovery));
                if (test_bit(MD_RECOVERY_INTR, &mddev->recovery))
                        return 0;
                spin_lock_irq(&conf->device_lock);
                conf->reshape_safe = mddev->reshape_position;
                spin_unlock_irq(&conf->device_lock);
                wake_up(&conf->wait_for_reshape);
                sysfs_notify_dirent_safe(mddev->sysfs_completed);
        }

        INIT_LIST_HEAD(&stripes);
        for (i = 0; i < reshape_sectors; i += RAID5_STRIPE_SECTORS(conf)) {
                int j;
                int skipped_disk = 0;
                sh = raid5_get_active_stripe(conf, NULL, stripe_addr+i,
                                             R5_GAS_NOQUIESCE);
                set_bit(STRIPE_EXPANDING, &sh->state);
                atomic_inc(&conf->reshape_stripes);
                /* If any of this stripe is beyond the end of the old
                 * array, then we need to zero those blocks
                 */
                for (j=sh->disks; j--;) {
                        sector_t s;
                        if (j == sh->pd_idx)
                                continue;
                        if (conf->level == 6 &&
                            j == sh->qd_idx)
                                continue;
                        s = raid5_compute_blocknr(sh, j, 0);
                        if (s < raid5_size(mddev, 0, 0)) {
                                skipped_disk = 1;
                                continue;
                        }
                        memset(page_address(sh->dev[j].page), 0, RAID5_STRIPE_SIZE(conf));
                        set_bit(R5_Expanded, &sh->dev[j].flags);
                        set_bit(R5_UPTODATE, &sh->dev[j].flags);
                }
                if (!skipped_disk) {
                        set_bit(STRIPE_EXPAND_READY, &sh->state);
                        set_bit(STRIPE_HANDLE, &sh->state);
                }
                list_add(&sh->lru, &stripes);
        }
        spin_lock_irq(&conf->device_lock);
        if (mddev->reshape_backwards)
                conf->reshape_progress -= reshape_sectors * new_data_disks;
        else
                conf->reshape_progress += reshape_sectors * new_data_disks;
        spin_unlock_irq(&conf->device_lock);
        /* Ok, those stripe are ready. We can start scheduling
         * reads on the source stripes.
         * The source stripes are determined by mapping the first and last
         * block on the destination stripes.
         */
        first_sector =
                raid5_compute_sector(conf, stripe_addr*(new_data_disks),
                                     1, &dd_idx, NULL);
        last_sector =
                raid5_compute_sector(conf, ((stripe_addr+reshape_sectors)
                                            * new_data_disks - 1),
                                     1, &dd_idx, NULL);
        if (last_sector >= mddev->dev_sectors)
                last_sector = mddev->dev_sectors - 1;
        while (first_sector <= last_sector) {
                sh = raid5_get_active_stripe(conf, NULL, first_sector,
                                R5_GAS_PREVIOUS | R5_GAS_NOQUIESCE);
                set_bit(STRIPE_EXPAND_SOURCE, &sh->state);
                set_bit(STRIPE_HANDLE, &sh->state);
                raid5_release_stripe(sh);
                first_sector += RAID5_STRIPE_SECTORS(conf);
        }
        /* Now that the sources are clearly marked, we can release
         * the destination stripes
         */
        while (!list_empty(&stripes)) {
                sh = list_entry(stripes.next, struct stripe_head, lru);
                list_del_init(&sh->lru);
                raid5_release_stripe(sh);
        }
        /* If this takes us to the resync_max point where we have to pause,
         * then we need to write out the superblock.
         */
        sector_nr += reshape_sectors;
        retn = reshape_sectors;
finish:
        if (mddev->curr_resync_completed > mddev->resync_max ||
            (sector_nr - mddev->curr_resync_completed) * 2
            >= mddev->resync_max - mddev->curr_resync_completed) {
                /* Cannot proceed until we've updated the superblock... */
                wait_event(conf->wait_for_reshape,
                           atomic_read(&conf->reshape_stripes) == 0
                           || test_bit(MD_RECOVERY_INTR, &mddev->recovery));
                if (atomic_read(&conf->reshape_stripes) != 0)
                        goto ret;
                mddev->reshape_position = conf->reshape_progress;
                mddev->curr_resync_completed = sector_nr;
                if (!mddev->reshape_backwards)
                        /* Can update recovery_offset */
                        rdev_for_each(rdev, mddev)
                                if (rdev->raid_disk >= 0 &&
                                    !test_bit(Journal, &rdev->flags) &&
                                    !test_bit(In_sync, &rdev->flags) &&
                                    rdev->recovery_offset < sector_nr)
                                        rdev->recovery_offset = sector_nr;
                conf->reshape_checkpoint = jiffies;
                set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
                md_wakeup_thread(mddev->thread);
                wait_event(mddev->sb_wait,
                           !test_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags)
                           || test_bit(MD_RECOVERY_INTR, &mddev->recovery));
                if (test_bit(MD_RECOVERY_INTR, &mddev->recovery))
                        goto ret;
                spin_lock_irq(&conf->device_lock);
                conf->reshape_safe = mddev->reshape_position;
                spin_unlock_irq(&conf->device_lock);
                wake_up(&conf->wait_for_reshape);
                sysfs_notify_dirent_safe(mddev->sysfs_completed);
        }
ret:
        return retn;
}

static inline sector_t raid5_sync_request(struct mddev *mddev, sector_t sector_nr,
                                          sector_t max_sector, int *skipped)
{
        struct r5conf *conf = mddev->private;
        struct stripe_head *sh;
        sector_t sync_blocks;
        bool still_degraded = false;
        int i;

        if (sector_nr >= max_sector) {
                /* just being told to finish up .. nothing much to do */

                if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery)) {
                        end_reshape(conf);
                        return 0;
                }

                if (mddev->curr_resync < max_sector) /* aborted */
                        md_bitmap_end_sync(mddev, mddev->curr_resync,
                                           &sync_blocks);
                else /* completed sync */
                        conf->fullsync = 0;
                if (md_bitmap_enabled(mddev, false))
                        mddev->bitmap_ops->close_sync(mddev);

                return 0;
        }

        /* Allow raid5_quiesce to complete */
        wait_event(conf->wait_for_reshape, conf->quiesce != 2);

        if (test_bit(MD_RECOVERY_RESHAPE, &mddev->recovery))
                return reshape_request(mddev, sector_nr, skipped);

        /* No need to check resync_max as we never do more than one
         * stripe, and as resync_max will always be on a chunk boundary,
         * if the check in md_do_sync didn't fire, there is no chance
         * of overstepping resync_max here
         */

        /* if there is too many failed drives and we are trying
         * to resync, then assert that we are finished, because there is
         * nothing we can do.
         */
        if (mddev->degraded >= conf->max_degraded &&
            test_bit(MD_RECOVERY_SYNC, &mddev->recovery)) {
                sector_t rv = mddev->dev_sectors - sector_nr;
                *skipped = 1;
                return rv;
        }
        if (!test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery) &&
            !conf->fullsync &&
            !md_bitmap_start_sync(mddev, sector_nr, &sync_blocks, true) &&
            sync_blocks >= RAID5_STRIPE_SECTORS(conf)) {
                /* we can skip this block, and probably more */
                do_div(sync_blocks, RAID5_STRIPE_SECTORS(conf));
                *skipped = 1;
                /* keep things rounded to whole stripes */
                return sync_blocks * RAID5_STRIPE_SECTORS(conf);
        }

        if (md_bitmap_enabled(mddev, false))
                mddev->bitmap_ops->cond_end_sync(mddev, sector_nr, false);

        sh = raid5_get_active_stripe(conf, NULL, sector_nr,
                                     R5_GAS_NOBLOCK);
        if (sh == NULL) {
                sh = raid5_get_active_stripe(conf, NULL, sector_nr, 0);
                /* make sure we don't swamp the stripe cache if someone else
                 * is trying to get access
                 */
                schedule_timeout_uninterruptible(1);
        }
        /* Need to check if array will still be degraded after recovery/resync
         * Note in case of > 1 drive failures it's possible we're rebuilding
         * one drive while leaving another faulty drive in array.
         */
        for (i = 0; i < conf->raid_disks; i++) {
                struct md_rdev *rdev = conf->disks[i].rdev;

                if (rdev == NULL || test_bit(Faulty, &rdev->flags))
                        still_degraded = true;
        }

        md_bitmap_start_sync(mddev, sector_nr, &sync_blocks, still_degraded);
        set_bit(STRIPE_SYNC_REQUESTED, &sh->state);
        set_bit(STRIPE_HANDLE, &sh->state);

        raid5_release_stripe(sh);

        return RAID5_STRIPE_SECTORS(conf);
}

static int  retry_aligned_read(struct r5conf *conf, struct bio *raid_bio,
                               unsigned int offset)
{
        /* We may not be able to submit a whole bio at once as there
         * may not be enough stripe_heads available.
         * We cannot pre-allocate enough stripe_heads as we may need
         * more than exist in the cache (if we allow ever large chunks).
         * So we do one stripe head at a time and record in
         * ->bi_hw_segments how many have been done.
         *
         * We *know* that this entire raid_bio is in one chunk, so
         * it will be only one 'dd_idx' and only need one call to raid5_compute_sector.
         */
        struct stripe_head *sh;
        int dd_idx;
        sector_t sector, logical_sector, last_sector;
        int scnt = 0;
        int handled = 0;

        logical_sector = raid_bio->bi_iter.bi_sector &
                ~((sector_t)RAID5_STRIPE_SECTORS(conf)-1);
        sector = raid5_compute_sector(conf, logical_sector,
                                      0, &dd_idx, NULL);
        last_sector = bio_end_sector(raid_bio);

        for (; logical_sector < last_sector;
             logical_sector += RAID5_STRIPE_SECTORS(conf),
                     sector += RAID5_STRIPE_SECTORS(conf),
                     scnt++) {

                if (scnt < offset)
                        /* already done this stripe */
                        continue;

                sh = raid5_get_active_stripe(conf, NULL, sector,
                                R5_GAS_NOBLOCK | R5_GAS_NOQUIESCE);
                if (!sh) {
                        /* failed to get a stripe - must wait */
                        conf->retry_read_aligned = raid_bio;
                        conf->retry_read_offset = scnt;
                        return handled;
                }

                if (!add_stripe_bio(sh, raid_bio, dd_idx, 0, 0)) {
                        raid5_release_stripe(sh);
                        conf->retry_read_aligned = raid_bio;
                        conf->retry_read_offset = scnt;
                        return handled;
                }

                set_bit(R5_ReadNoMerge, &sh->dev[dd_idx].flags);
                handle_stripe(sh);
                raid5_release_stripe(sh);
                handled++;
        }

        bio_endio(raid_bio);

        if (atomic_dec_and_test(&conf->active_aligned_reads))
                wake_up(&conf->wait_for_quiescent);
        return handled;
}

static int handle_active_stripes(struct r5conf *conf, int group,
                                 struct r5worker *worker,
                                 struct list_head *temp_inactive_list)
                __must_hold(&conf->device_lock)
{
        struct stripe_head *batch[MAX_STRIPE_BATCH], *sh;
        int i, batch_size = 0, hash;
        bool release_inactive = false;

        while (batch_size < MAX_STRIPE_BATCH &&
                        (sh = __get_priority_stripe(conf, group)) != NULL)
                batch[batch_size++] = sh;

        if (batch_size == 0) {
                for (i = 0; i < NR_STRIPE_HASH_LOCKS; i++)
                        if (!list_empty(temp_inactive_list + i))
                                break;
                if (i == NR_STRIPE_HASH_LOCKS) {
                        spin_unlock_irq(&conf->device_lock);
                        log_flush_stripe_to_raid(conf);
                        spin_lock_irq(&conf->device_lock);
                        return batch_size;
                }
                release_inactive = true;
        }
        spin_unlock_irq(&conf->device_lock);

        release_inactive_stripe_list(conf, temp_inactive_list,
                                     NR_STRIPE_HASH_LOCKS);

        r5l_flush_stripe_to_raid(conf->log);
        if (release_inactive) {
                spin_lock_irq(&conf->device_lock);
                return 0;
        }

        for (i = 0; i < batch_size; i++)
                handle_stripe(batch[i]);
        log_write_stripe_run(conf);

        cond_resched();

        spin_lock_irq(&conf->device_lock);
        for (i = 0; i < batch_size; i++) {
                hash = batch[i]->hash_lock_index;
                __release_stripe(conf, batch[i], &temp_inactive_list[hash]);
        }
        return batch_size;
}

static void raid5_do_work(struct work_struct *work)
{
        struct r5worker *worker = container_of(work, struct r5worker, work);
        struct r5worker_group *group = worker->group;
        struct r5conf *conf = group->conf;
        struct mddev *mddev = conf->mddev;
        int group_id = group - conf->worker_groups;
        int handled;
        struct blk_plug plug;

        pr_debug("+++ raid5worker active\n");

        blk_start_plug(&plug);
        handled = 0;
        spin_lock_irq(&conf->device_lock);
        while (1) {
                int batch_size, released;

                released = release_stripe_list(conf, worker->temp_inactive_list);

                batch_size = handle_active_stripes(conf, group_id, worker,
                                                   worker->temp_inactive_list);
                worker->working = false;
                if (!batch_size && !released)
                        break;
                handled += batch_size;
                wait_event_lock_irq(mddev->sb_wait,
                        !test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags),
                        conf->device_lock);
        }
        pr_debug("%d stripes handled\n", handled);

        spin_unlock_irq(&conf->device_lock);

        flush_deferred_bios(conf);

        r5l_flush_stripe_to_raid(conf->log);

        async_tx_issue_pending_all();
        blk_finish_plug(&plug);

        pr_debug("--- raid5worker inactive\n");
}

/*
 * This is our raid5 kernel thread.
 *
 * We scan the hash table for stripes which can be handled now.
 * During the scan, completed stripes are saved for us by the interrupt
 * handler, so that they will not have to wait for our next wakeup.
 */
static void raid5d(struct md_thread *thread)
{
        struct mddev *mddev = thread->mddev;
        struct r5conf *conf = mddev->private;
        int handled;
        struct blk_plug plug;

        pr_debug("+++ raid5d active\n");

        md_check_recovery(mddev);

        blk_start_plug(&plug);
        handled = 0;
        spin_lock_irq(&conf->device_lock);
        while (1) {
                struct bio *bio;
                int batch_size, released;
                unsigned int offset;

                if (md_is_rdwr(mddev) &&
                    test_bit(MD_SB_CHANGE_PENDING, &mddev->sb_flags))
                        break;

                released = release_stripe_list(conf, conf->temp_inactive_list);
                if (released)
                        clear_bit(R5_DID_ALLOC, &conf->cache_state);

                if (
                    !list_empty(&conf->bitmap_list)) {
                        /* Now is a good time to flush some bitmap updates */
                        conf->seq_flush++;
                        spin_unlock_irq(&conf->device_lock);
                        if (md_bitmap_enabled(mddev, true))
                                mddev->bitmap_ops->unplug(mddev, true);
                        spin_lock_irq(&conf->device_lock);
                        conf->seq_write = conf->seq_flush;
                        activate_bit_delay(conf, conf->temp_inactive_list);
                }
                raid5_activate_delayed(conf);

                while ((bio = remove_bio_from_retry(conf, &offset))) {
                        int ok;
                        spin_unlock_irq(&conf->device_lock);
                        ok = retry_aligned_read(conf, bio, offset);
                        spin_lock_irq(&conf->device_lock);
                        if (!ok)
                                break;
                        handled++;
                }

                batch_size = handle_active_stripes(conf, ANY_GROUP, NULL,
                                                   conf->temp_inactive_list);
                if (!batch_size && !released)
                        break;
                handled += batch_size;

                if (mddev->sb_flags & ~(1 << MD_SB_CHANGE_PENDING)) {
                        spin_unlock_irq(&conf->device_lock);
                        md_check_recovery(mddev);
                        spin_lock_irq(&conf->device_lock);
                }
        }
        pr_debug("%d stripes handled\n", handled);

        spin_unlock_irq(&conf->device_lock);
        if (test_and_clear_bit(R5_ALLOC_MORE, &conf->cache_state) &&
            mutex_trylock(&conf->cache_size_mutex)) {
                grow_one_stripe(conf, __GFP_NOWARN);
                /* Set flag even if allocation failed.  This helps
                 * slow down allocation requests when mem is short
                 */
                set_bit(R5_DID_ALLOC, &conf->cache_state);
                mutex_unlock(&conf->cache_size_mutex);
        }

        flush_deferred_bios(conf);

        r5l_flush_stripe_to_raid(conf->log);

        async_tx_issue_pending_all();
        blk_finish_plug(&plug);

        pr_debug("--- raid5d inactive\n");
}

static ssize_t
raid5_show_stripe_cache_size(struct mddev *mddev, char *page)
{
        struct r5conf *conf;
        int ret = 0;
        spin_lock(&mddev->lock);
        conf = mddev->private;
        if (conf)
                ret = sprintf(page, "%d\n", conf->min_nr_stripes);
        spin_unlock(&mddev->lock);
        return ret;
}

int
raid5_set_cache_size(struct mddev *mddev, int size)
{
        int result = 0;
        struct r5conf *conf = mddev->private;

        if (size <= 16 || size > 32768)
                return -EINVAL;

        WRITE_ONCE(conf->min_nr_stripes, size);
        mutex_lock(&conf->cache_size_mutex);
        while (size < conf->max_nr_stripes &&
               drop_one_stripe(conf))
                ;
        mutex_unlock(&conf->cache_size_mutex);

        md_allow_write(mddev);

        mutex_lock(&conf->cache_size_mutex);
        while (size > conf->max_nr_stripes)
                if (!grow_one_stripe(conf, GFP_KERNEL)) {
                        WRITE_ONCE(conf->min_nr_stripes, conf->max_nr_stripes);
                        result = -ENOMEM;
                        break;
                }
        mutex_unlock(&conf->cache_size_mutex);

        return result;
}
EXPORT_SYMBOL(raid5_set_cache_size);

static ssize_t
raid5_store_stripe_cache_size(struct mddev *mddev, const char *page, size_t len)
{
        struct r5conf *conf;
        unsigned long new;
        int err;

        if (len >= PAGE_SIZE)
                return -EINVAL;
        if (kstrtoul(page, 10, &new))
                return -EINVAL;
        err = mddev_lock(mddev);
        if (err)
                return err;
        conf = mddev->private;
        if (!conf)
                err = -ENODEV;
        else
                err = raid5_set_cache_size(mddev, new);
        mddev_unlock(mddev);

        return err ?: len;
}

static struct md_sysfs_entry
raid5_stripecache_size = __ATTR(stripe_cache_size, S_IRUGO | S_IWUSR,
                                raid5_show_stripe_cache_size,
                                raid5_store_stripe_cache_size);

static ssize_t
raid5_show_rmw_level(struct mddev  *mddev, char *page)
{
        struct r5conf *conf = mddev->private;
        if (conf)
                return sprintf(page, "%d\n", conf->rmw_level);
        else
                return 0;
}

static ssize_t
raid5_store_rmw_level(struct mddev  *mddev, const char *page, size_t len)
{
        struct r5conf *conf = mddev->private;
        unsigned long new;

        if (!conf)
                return -ENODEV;

        if (len >= PAGE_SIZE)
                return -EINVAL;

        if (kstrtoul(page, 10, &new))
                return -EINVAL;

        if (new != PARITY_DISABLE_RMW && !raid6_call.xor_syndrome)
                return -EINVAL;

        if (new != PARITY_DISABLE_RMW &&
            new != PARITY_ENABLE_RMW &&
            new != PARITY_PREFER_RMW)
                return -EINVAL;

        conf->rmw_level = new;
        return len;
}

static struct md_sysfs_entry
raid5_rmw_level = __ATTR(rmw_level, S_IRUGO | S_IWUSR,
                         raid5_show_rmw_level,
                         raid5_store_rmw_level);

static ssize_t
raid5_show_stripe_size(struct mddev  *mddev, char *page)
{
        struct r5conf *conf;
        int ret = 0;

        spin_lock(&mddev->lock);
        conf = mddev->private;
        if (conf)
                ret = sprintf(page, "%lu\n", RAID5_STRIPE_SIZE(conf));
        spin_unlock(&mddev->lock);
        return ret;
}

#if PAGE_SIZE != DEFAULT_STRIPE_SIZE
static ssize_t
raid5_store_stripe_size(struct mddev  *mddev, const char *page, size_t len)
{
        struct r5conf *conf;
        unsigned long new;
        int err;
        int size;

        if (len >= PAGE_SIZE)
                return -EINVAL;
        if (kstrtoul(page, 10, &new))
                return -EINVAL;

        /*
         * The value should not be bigger than PAGE_SIZE. It requires to
         * be multiple of DEFAULT_STRIPE_SIZE and the value should be power
         * of two.
         */
        if (new % DEFAULT_STRIPE_SIZE != 0 ||
                        new > PAGE_SIZE || new == 0 ||
                        new != roundup_pow_of_two(new))
                return -EINVAL;

        err = mddev_suspend_and_lock(mddev);
        if (err)
                return err;

        conf = mddev->private;
        if (!conf) {
                err = -ENODEV;
                goto out_unlock;
        }

        if (new == conf->stripe_size)
                goto out_unlock;

        pr_debug("md/raid: change stripe_size from %lu to %lu\n",
                        conf->stripe_size, new);

        if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery) ||
            mddev->reshape_position != MaxSector || mddev->sysfs_active) {
                err = -EBUSY;
                goto out_unlock;
        }

        mutex_lock(&conf->cache_size_mutex);
        size = conf->max_nr_stripes;

        shrink_stripes(conf);

        conf->stripe_size = new;
        conf->stripe_shift = ilog2(new) - 9;
        conf->stripe_sectors = new >> 9;
        if (grow_stripes(conf, size)) {
                pr_warn("md/raid:%s: couldn't allocate buffers\n",
                                mdname(mddev));
                err = -ENOMEM;
        }
        mutex_unlock(&conf->cache_size_mutex);

out_unlock:
        mddev_unlock_and_resume(mddev);
        return err ?: len;
}

static struct md_sysfs_entry
raid5_stripe_size = __ATTR(stripe_size, 0644,
                         raid5_show_stripe_size,
                         raid5_store_stripe_size);
#else
static struct md_sysfs_entry
raid5_stripe_size = __ATTR(stripe_size, 0444,
                         raid5_show_stripe_size,
                         NULL);
#endif

static ssize_t
raid5_show_preread_threshold(struct mddev *mddev, char *page)
{
        struct r5conf *conf;
        int ret = 0;
        spin_lock(&mddev->lock);
        conf = mddev->private;
        if (conf)
                ret = sprintf(page, "%d\n", conf->bypass_threshold);
        spin_unlock(&mddev->lock);
        return ret;
}

static ssize_t
raid5_store_preread_threshold(struct mddev *mddev, const char *page, size_t len)
{
        struct r5conf *conf;
        unsigned long new;
        int err;

        if (len >= PAGE_SIZE)
                return -EINVAL;
        if (kstrtoul(page, 10, &new))
                return -EINVAL;

        err = mddev_lock(mddev);
        if (err)
                return err;
        conf = mddev->private;
        if (!conf)
                err = -ENODEV;
        else if (new > conf->min_nr_stripes)
                err = -EINVAL;
        else
                conf->bypass_threshold = new;
        mddev_unlock(mddev);
        return err ?: len;
}

static struct md_sysfs_entry
raid5_preread_bypass_threshold = __ATTR(preread_bypass_threshold,
                                        S_IRUGO | S_IWUSR,
                                        raid5_show_preread_threshold,
                                        raid5_store_preread_threshold);

static ssize_t
raid5_show_skip_copy(struct mddev *mddev, char *page)
{
        struct r5conf *conf;
        int ret = 0;
        spin_lock(&mddev->lock);
        conf = mddev->private;
        if (conf)
                ret = sprintf(page, "%d\n", conf->skip_copy);
        spin_unlock(&mddev->lock);
        return ret;
}

static ssize_t
raid5_store_skip_copy(struct mddev *mddev, const char *page, size_t len)
{
        struct r5conf *conf;
        unsigned long new;
        int err;

        if (len >= PAGE_SIZE)
                return -EINVAL;
        if (kstrtoul(page, 10, &new))
                return -EINVAL;
        new = !!new;

        err = mddev_suspend_and_lock(mddev);
        if (err)
                return err;
        conf = mddev->private;
        if (!conf)
                err = -ENODEV;
        else if (new != conf->skip_copy) {
                struct request_queue *q = mddev->gendisk->queue;
                struct queue_limits lim = queue_limits_start_update(q);

                conf->skip_copy = new;
                if (new)
                        lim.features |= BLK_FEAT_STABLE_WRITES;
                else
                        lim.features &= ~BLK_FEAT_STABLE_WRITES;
                err = queue_limits_commit_update(q, &lim);
        }
        mddev_unlock_and_resume(mddev);
        return err ?: len;
}

static struct md_sysfs_entry
raid5_skip_copy = __ATTR(skip_copy, S_IRUGO | S_IWUSR,
                                        raid5_show_skip_copy,
                                        raid5_store_skip_copy);

static ssize_t
stripe_cache_active_show(struct mddev *mddev, char *page)
{
        struct r5conf *conf = mddev->private;
        if (conf)
                return sprintf(page, "%d\n", atomic_read(&conf->active_stripes));
        else
                return 0;
}

static struct md_sysfs_entry
raid5_stripecache_active = __ATTR_RO(stripe_cache_active);

static ssize_t
raid5_show_group_thread_cnt(struct mddev *mddev, char *page)
{
        struct r5conf *conf;
        int ret = 0;
        spin_lock(&mddev->lock);
        conf = mddev->private;
        if (conf)
                ret = sprintf(page, "%d\n", conf->worker_cnt_per_group);
        spin_unlock(&mddev->lock);
        return ret;
}

static int alloc_thread_groups(struct r5conf *conf, int cnt,
                               int *group_cnt,
                               struct r5worker_group **worker_groups);
static ssize_t
raid5_store_group_thread_cnt(struct mddev *mddev, const char *page, size_t len)
{
        struct r5conf *conf;
        unsigned int new;
        int err;
        struct r5worker_group *new_groups, *old_groups;
        int group_cnt;

        if (len >= PAGE_SIZE)
                return -EINVAL;
        if (kstrtouint(page, 10, &new))
                return -EINVAL;
        /* 8192 should be big enough */
        if (new > 8192)
                return -EINVAL;

        err = mddev_suspend_and_lock(mddev);
        if (err)
                return err;
        conf = mddev->private;
        if (!conf) {
                mddev_unlock_and_resume(mddev);
                return -ENODEV;
        }
        raid5_quiesce(mddev, true);

        if (new != conf->worker_cnt_per_group) {
                old_groups = conf->worker_groups;
                if (old_groups)
                        flush_workqueue(raid5_wq);

                err = alloc_thread_groups(conf, new, &group_cnt, &new_groups);
                if (!err) {
                        spin_lock_irq(&conf->device_lock);
                        conf->group_cnt = group_cnt;
                        conf->worker_cnt_per_group = new;
                        conf->worker_groups = new_groups;
                        spin_unlock_irq(&conf->device_lock);

                        if (old_groups)
                                kfree(old_groups[0].workers);
                        kfree(old_groups);
                }
        }

        raid5_quiesce(mddev, false);
        mddev_unlock_and_resume(mddev);

        return err ?: len;
}

static struct md_sysfs_entry
raid5_group_thread_cnt = __ATTR(group_thread_cnt, S_IRUGO | S_IWUSR,
                                raid5_show_group_thread_cnt,
                                raid5_store_group_thread_cnt);

static struct attribute *raid5_attrs[] =  {
        &raid5_stripecache_size.attr,
        &raid5_stripecache_active.attr,
        &raid5_preread_bypass_threshold.attr,
        &raid5_group_thread_cnt.attr,
        &raid5_skip_copy.attr,
        &raid5_rmw_level.attr,
        &raid5_stripe_size.attr,
        &r5c_journal_mode.attr,
        &ppl_write_hint.attr,
        NULL,
};
static const struct attribute_group raid5_attrs_group = {
        .name = NULL,
        .attrs = raid5_attrs,
};

static int alloc_thread_groups(struct r5conf *conf, int cnt, int *group_cnt,
                               struct r5worker_group **worker_groups)
{
        int i, j, k;
        ssize_t size;
        struct r5worker *workers;

        if (cnt == 0) {
                *group_cnt = 0;
                *worker_groups = NULL;
                return 0;
        }
        *group_cnt = num_possible_nodes();
        size = sizeof(struct r5worker) * cnt;
        workers = kcalloc(size, *group_cnt, GFP_NOIO);
        *worker_groups = kzalloc_objs(struct r5worker_group, *group_cnt,
                                      GFP_NOIO);
        if (!*worker_groups || !workers) {
                kfree(workers);
                kfree(*worker_groups);
                return -ENOMEM;
        }

        for (i = 0; i < *group_cnt; i++) {
                struct r5worker_group *group;

                group = &(*worker_groups)[i];
                INIT_LIST_HEAD(&group->handle_list);
                INIT_LIST_HEAD(&group->loprio_list);
                group->conf = conf;
                group->workers = workers + i * cnt;

                for (j = 0; j < cnt; j++) {
                        struct r5worker *worker = group->workers + j;
                        worker->group = group;
                        INIT_WORK(&worker->work, raid5_do_work);

                        for (k = 0; k < NR_STRIPE_HASH_LOCKS; k++)
                                INIT_LIST_HEAD(worker->temp_inactive_list + k);
                }
        }

        return 0;
}

static void free_thread_groups(struct r5conf *conf)
{
        if (conf->worker_groups)
                kfree(conf->worker_groups[0].workers);
        kfree(conf->worker_groups);
        conf->worker_groups = NULL;
}

static sector_t
raid5_size(struct mddev *mddev, sector_t sectors, int raid_disks)
{
        struct r5conf *conf = mddev->private;

        if (!sectors)
                sectors = mddev->dev_sectors;
        if (!raid_disks)
                /* size is defined by the smallest of previous and new size */
                raid_disks = min(conf->raid_disks, conf->previous_raid_disks);

        sectors &= ~((sector_t)conf->chunk_sectors - 1);
        sectors &= ~((sector_t)conf->prev_chunk_sectors - 1);
        return sectors * (raid_disks - conf->max_degraded);
}

static void free_scratch_buffer(struct r5conf *conf, struct raid5_percpu *percpu)
{
        safe_put_page(percpu->spare_page);
        percpu->spare_page = NULL;
        kvfree(percpu->scribble);
        percpu->scribble = NULL;
}

static int alloc_scratch_buffer(struct r5conf *conf, struct raid5_percpu *percpu)
{
        if (conf->level == 6 && !percpu->spare_page) {
                percpu->spare_page = alloc_page(GFP_KERNEL);
                if (!percpu->spare_page)
                        return -ENOMEM;
        }

        if (scribble_alloc(percpu,
                           max(conf->raid_disks,
                               conf->previous_raid_disks),
                           max(conf->chunk_sectors,
                               conf->prev_chunk_sectors)
                           / RAID5_STRIPE_SECTORS(conf))) {
                free_scratch_buffer(conf, percpu);
                return -ENOMEM;
        }

        local_lock_init(&percpu->lock);
        return 0;
}

static int raid456_cpu_dead(unsigned int cpu, struct hlist_node *node)
{
        struct r5conf *conf = hlist_entry_safe(node, struct r5conf, node);

        free_scratch_buffer(conf, per_cpu_ptr(conf->percpu, cpu));
        return 0;
}

static void raid5_free_percpu(struct r5conf *conf)
{
        if (!conf->percpu)
                return;

        cpuhp_state_remove_instance(CPUHP_MD_RAID5_PREPARE, &conf->node);
        free_percpu(conf->percpu);
}

static void free_conf(struct r5conf *conf)
{
        int i;

        log_exit(conf);

        shrinker_free(conf->shrinker);
        free_thread_groups(conf);
        shrink_stripes(conf);
        raid5_free_percpu(conf);
        for (i = 0; i < conf->pool_size; i++)
                if (conf->disks[i].extra_page)
                        put_page(conf->disks[i].extra_page);
        kfree(conf->disks);
        bioset_exit(&conf->bio_split);
        kfree(conf->stripe_hashtbl);
        kfree(conf->pending_data);

        mempool_destroy(conf->ctx_pool);

        kfree(conf);
}

static int raid456_cpu_up_prepare(unsigned int cpu, struct hlist_node *node)
{
        struct r5conf *conf = hlist_entry_safe(node, struct r5conf, node);
        struct raid5_percpu *percpu = per_cpu_ptr(conf->percpu, cpu);

        if (alloc_scratch_buffer(conf, percpu)) {
                pr_warn("%s: failed memory allocation for cpu%u\n",
                        __func__, cpu);
                return -ENOMEM;
        }
        return 0;
}

static int raid5_alloc_percpu(struct r5conf *conf)
{
        int err = 0;

        conf->percpu = alloc_percpu(struct raid5_percpu);
        if (!conf->percpu)
                return -ENOMEM;

        err = cpuhp_state_add_instance(CPUHP_MD_RAID5_PREPARE, &conf->node);
        if (!err) {
                conf->scribble_disks = max(conf->raid_disks,
                        conf->previous_raid_disks);
                conf->scribble_sectors = max(conf->chunk_sectors,
                        conf->prev_chunk_sectors);
        }
        return err;
}

static unsigned long raid5_cache_scan(struct shrinker *shrink,
                                      struct shrink_control *sc)
{
        struct r5conf *conf = shrink->private_data;
        unsigned long ret = SHRINK_STOP;

        if (mutex_trylock(&conf->cache_size_mutex)) {
                ret= 0;
                while (ret < sc->nr_to_scan &&
                       conf->max_nr_stripes > conf->min_nr_stripes) {
                        if (drop_one_stripe(conf) == 0) {
                                ret = SHRINK_STOP;
                                break;
                        }
                        ret++;
                }
                mutex_unlock(&conf->cache_size_mutex);
        }
        return ret;
}

static unsigned long raid5_cache_count(struct shrinker *shrink,
                                       struct shrink_control *sc)
{
        struct r5conf *conf = shrink->private_data;
        int max_stripes = READ_ONCE(conf->max_nr_stripes);
        int min_stripes = READ_ONCE(conf->min_nr_stripes);

        if (max_stripes < min_stripes)
                /* unlikely, but not impossible */
                return 0;
        return max_stripes - min_stripes;
}

static struct r5conf *setup_conf(struct mddev *mddev)
{
        struct r5conf *conf;
        int raid_disk, memory, max_disks;
        struct md_rdev *rdev;
        struct disk_info *disk;
        char pers_name[6];
        int i;
        int group_cnt;
        struct r5worker_group *new_group;
        int ret = -ENOMEM;

        if (mddev->new_level != 5
            && mddev->new_level != 4
            && mddev->new_level != 6) {
                pr_warn("md/raid:%s: raid level not set to 4/5/6 (%d)\n",
                        mdname(mddev), mddev->new_level);
                return ERR_PTR(-EIO);
        }
        if ((mddev->new_level == 5
             && !algorithm_valid_raid5(mddev->new_layout)) ||
            (mddev->new_level == 6
             && !algorithm_valid_raid6(mddev->new_layout))) {
                pr_warn("md/raid:%s: layout %d not supported\n",
                        mdname(mddev), mddev->new_layout);
                return ERR_PTR(-EIO);
        }
        if (mddev->new_level == 6 && mddev->raid_disks < 4) {
                pr_warn("md/raid:%s: not enough configured devices (%d, minimum 4)\n",
                        mdname(mddev), mddev->raid_disks);
                return ERR_PTR(-EINVAL);
        }

        if (!mddev->new_chunk_sectors ||
            (mddev->new_chunk_sectors << 9) % PAGE_SIZE ||
            !is_power_of_2(mddev->new_chunk_sectors)) {
                pr_warn("md/raid:%s: invalid chunk size %d\n",
                        mdname(mddev), mddev->new_chunk_sectors << 9);
                return ERR_PTR(-EINVAL);
        }

        conf = kzalloc_obj(struct r5conf);
        if (conf == NULL)
                goto abort;

#if PAGE_SIZE != DEFAULT_STRIPE_SIZE
        conf->stripe_size = DEFAULT_STRIPE_SIZE;
        conf->stripe_shift = ilog2(DEFAULT_STRIPE_SIZE) - 9;
        conf->stripe_sectors = DEFAULT_STRIPE_SIZE >> 9;
#endif
        INIT_LIST_HEAD(&conf->free_list);
        INIT_LIST_HEAD(&conf->pending_list);
        conf->pending_data = kzalloc_objs(struct r5pending_data, PENDING_IO_MAX);
        if (!conf->pending_data)
                goto abort;
        for (i = 0; i < PENDING_IO_MAX; i++)
                list_add(&conf->pending_data[i].sibling, &conf->free_list);
        /* Don't enable multi-threading by default*/
        if (!alloc_thread_groups(conf, 0, &group_cnt, &new_group)) {
                conf->group_cnt = group_cnt;
                conf->worker_cnt_per_group = 0;
                conf->worker_groups = new_group;
        } else
                goto abort;
        spin_lock_init(&conf->device_lock);
        seqcount_spinlock_init(&conf->gen_lock, &conf->device_lock);
        mutex_init(&conf->cache_size_mutex);

        init_waitqueue_head(&conf->wait_for_quiescent);
        init_waitqueue_head(&conf->wait_for_stripe);
        init_waitqueue_head(&conf->wait_for_reshape);
        INIT_LIST_HEAD(&conf->handle_list);
        INIT_LIST_HEAD(&conf->loprio_list);
        INIT_LIST_HEAD(&conf->hold_list);
        INIT_LIST_HEAD(&conf->delayed_list);
        INIT_LIST_HEAD(&conf->bitmap_list);
        init_llist_head(&conf->released_stripes);
        atomic_set(&conf->active_stripes, 0);
        atomic_set(&conf->preread_active_stripes, 0);
        atomic_set(&conf->active_aligned_reads, 0);
        spin_lock_init(&conf->pending_bios_lock);
        conf->batch_bio_dispatch = true;
        rdev_for_each(rdev, mddev) {
                if (test_bit(Journal, &rdev->flags))
                        continue;
                if (bdev_nonrot(rdev->bdev)) {
                        conf->batch_bio_dispatch = false;
                        break;
                }
        }

        conf->bypass_threshold = BYPASS_THRESHOLD;
        conf->raid_disks = mddev->raid_disks;
        if (mddev->reshape_position == MaxSector)
                conf->previous_raid_disks = mddev->raid_disks;
        else
                conf->previous_raid_disks = mddev->raid_disks - mddev->delta_disks;
        max_disks = max(conf->raid_disks, conf->previous_raid_disks);

        conf->disks = kzalloc_objs(struct disk_info, max_disks);

        if (!conf->disks)
                goto abort;

        for (i = 0; i < max_disks; i++) {
                conf->disks[i].extra_page = alloc_page(GFP_KERNEL);
                if (!conf->disks[i].extra_page)
                        goto abort;
        }

        ret = bioset_init(&conf->bio_split, BIO_POOL_SIZE, 0, 0);
        if (ret)
                goto abort;
        conf->mddev = mddev;

        ret = -ENOMEM;
        conf->stripe_hashtbl = kzalloc(PAGE_SIZE, GFP_KERNEL);
        if (!conf->stripe_hashtbl)
                goto abort;

        /* We init hash_locks[0] separately to that it can be used
         * as the reference lock in the spin_lock_nest_lock() call
         * in lock_all_device_hash_locks_irq in order to convince
         * lockdep that we know what we are doing.
         */
        spin_lock_init(conf->hash_locks);
        for (i = 1; i < NR_STRIPE_HASH_LOCKS; i++)
                spin_lock_init(conf->hash_locks + i);

        for (i = 0; i < NR_STRIPE_HASH_LOCKS; i++)
                INIT_LIST_HEAD(conf->inactive_list + i);

        for (i = 0; i < NR_STRIPE_HASH_LOCKS; i++)
                INIT_LIST_HEAD(conf->temp_inactive_list + i);

        atomic_set(&conf->r5c_cached_full_stripes, 0);
        INIT_LIST_HEAD(&conf->r5c_full_stripe_list);
        atomic_set(&conf->r5c_cached_partial_stripes, 0);
        INIT_LIST_HEAD(&conf->r5c_partial_stripe_list);
        atomic_set(&conf->r5c_flushing_full_stripes, 0);
        atomic_set(&conf->r5c_flushing_partial_stripes, 0);

        conf->level = mddev->new_level;
        conf->chunk_sectors = mddev->new_chunk_sectors;
        ret = raid5_alloc_percpu(conf);
        if (ret)
                goto abort;

        pr_debug("raid456: run(%s) called.\n", mdname(mddev));

        ret = -EIO;
        rdev_for_each(rdev, mddev) {
                raid_disk = rdev->raid_disk;
                if (raid_disk >= max_disks
                    || raid_disk < 0 || test_bit(Journal, &rdev->flags))
                        continue;
                disk = conf->disks + raid_disk;

                if (test_bit(Replacement, &rdev->flags)) {
                        if (disk->replacement)
                                goto abort;
                        disk->replacement = rdev;
                } else {
                        if (disk->rdev)
                                goto abort;
                        disk->rdev = rdev;
                }

                if (test_bit(In_sync, &rdev->flags)) {
                        pr_info("md/raid:%s: device %pg operational as raid disk %d\n",
                                mdname(mddev), rdev->bdev, raid_disk);
                } else if (rdev->saved_raid_disk != raid_disk)
                        /* Cannot rely on bitmap to complete recovery */
                        conf->fullsync = 1;
        }

        conf->level = mddev->new_level;
        if (conf->level == 6) {
                conf->max_degraded = 2;
                if (raid6_call.xor_syndrome)
                        conf->rmw_level = PARITY_ENABLE_RMW;
                else
                        conf->rmw_level = PARITY_DISABLE_RMW;
        } else {
                conf->max_degraded = 1;
                conf->rmw_level = PARITY_ENABLE_RMW;
        }
        conf->algorithm = mddev->new_layout;
        conf->reshape_progress = mddev->reshape_position;
        if (conf->reshape_progress != MaxSector) {
                conf->prev_chunk_sectors = mddev->chunk_sectors;
                conf->prev_algo = mddev->layout;
        } else {
                conf->prev_chunk_sectors = conf->chunk_sectors;
                conf->prev_algo = conf->algorithm;
        }

        conf->min_nr_stripes = NR_STRIPES;
        if (mddev->reshape_position != MaxSector) {
                int stripes = max_t(int,
                        ((mddev->chunk_sectors << 9) / RAID5_STRIPE_SIZE(conf)) * 4,
                        ((mddev->new_chunk_sectors << 9) / RAID5_STRIPE_SIZE(conf)) * 4);
                conf->min_nr_stripes = max(NR_STRIPES, stripes);
                if (conf->min_nr_stripes != NR_STRIPES)
                        pr_info("md/raid:%s: force stripe size %d for reshape\n",
                                mdname(mddev), conf->min_nr_stripes);
        }
        memory = conf->min_nr_stripes * (sizeof(struct stripe_head) +
                 max_disks * ((sizeof(struct bio) + PAGE_SIZE))) / 1024;
        atomic_set(&conf->empty_inactive_list_nr, NR_STRIPE_HASH_LOCKS);
        if (grow_stripes(conf, conf->min_nr_stripes)) {
                pr_warn("md/raid:%s: couldn't allocate %dkB for buffers\n",
                        mdname(mddev), memory);
                ret = -ENOMEM;
                goto abort;
        } else
                pr_debug("md/raid:%s: allocated %dkB\n", mdname(mddev), memory);
        /*
         * Losing a stripe head costs more than the time to refill it,
         * it reduces the queue depth and so can hurt throughput.
         * So set it rather large, scaled by number of devices.
         */
        conf->shrinker = shrinker_alloc(0, "md-raid5:%s", mdname(mddev));
        if (!conf->shrinker) {
                ret = -ENOMEM;
                pr_warn("md/raid:%s: couldn't allocate shrinker.\n",
                        mdname(mddev));
                goto abort;
        }

        conf->shrinker->seeks = DEFAULT_SEEKS * conf->raid_disks * 4;
        conf->shrinker->scan_objects = raid5_cache_scan;
        conf->shrinker->count_objects = raid5_cache_count;
        conf->shrinker->batch = 128;
        conf->shrinker->private_data = conf;

        shrinker_register(conf->shrinker);

        sprintf(pers_name, "raid%d", mddev->new_level);
        rcu_assign_pointer(conf->thread,
                           md_register_thread(raid5d, mddev, pers_name));
        if (!conf->thread) {
                pr_warn("md/raid:%s: couldn't allocate thread.\n",
                        mdname(mddev));
                ret = -ENOMEM;
                goto abort;
        }

        return conf;

 abort:
        if (conf)
                free_conf(conf);
        return ERR_PTR(ret);
}

static int only_parity(int raid_disk, int algo, int raid_disks, int max_degraded)
{
        switch (algo) {
        case ALGORITHM_PARITY_0:
                if (raid_disk < max_degraded)
                        return 1;
                break;
        case ALGORITHM_PARITY_N:
                if (raid_disk >= raid_disks - max_degraded)
                        return 1;
                break;
        case ALGORITHM_PARITY_0_6:
                if (raid_disk == 0 ||
                    raid_disk == raid_disks - 1)
                        return 1;
                break;
        case ALGORITHM_LEFT_ASYMMETRIC_6:
        case ALGORITHM_RIGHT_ASYMMETRIC_6:
        case ALGORITHM_LEFT_SYMMETRIC_6:
        case ALGORITHM_RIGHT_SYMMETRIC_6:
                if (raid_disk == raid_disks - 1)
                        return 1;
        }
        return 0;
}

static int raid5_create_ctx_pool(struct r5conf *conf)
{
        struct stripe_request_ctx *ctx;
        int size;

        if (mddev_is_dm(conf->mddev))
                size = BITS_TO_LONGS(RAID5_MAX_REQ_STRIPES);
        else
                size = BITS_TO_LONGS(
                        queue_max_hw_sectors(conf->mddev->gendisk->queue) >>
                        RAID5_STRIPE_SHIFT(conf));

        conf->ctx_size = struct_size(ctx, sectors_to_do, size);
        conf->ctx_pool = mempool_create_kmalloc_pool(NR_RAID_BIOS,
                                                     conf->ctx_size);

        return conf->ctx_pool ? 0 : -ENOMEM;
}

static int raid5_set_limits(struct mddev *mddev)
{
        struct r5conf *conf = mddev->private;
        struct queue_limits lim;
        int data_disks, stripe;
        struct md_rdev *rdev;

        /*
         * The read-ahead size must cover two whole stripes, which is
         * 2 * (datadisks) * chunksize where 'n' is the number of raid devices.
         */
        data_disks = conf->previous_raid_disks - conf->max_degraded;

        /*
         * We can only discard a whole stripe. It doesn't make sense to
         * discard data disk but write parity disk
         */
        stripe = roundup_pow_of_two(data_disks * (mddev->chunk_sectors << 9));

        md_init_stacking_limits(&lim);
        lim.logical_block_size = mddev->logical_block_size;
        lim.io_min = mddev->chunk_sectors << 9;
        lim.io_opt = lim.io_min * (conf->raid_disks - conf->max_degraded);
        lim.features |= BLK_FEAT_RAID_PARTIAL_STRIPES_EXPENSIVE;
        lim.discard_granularity = stripe;
        lim.max_write_zeroes_sectors = 0;
        lim.max_hw_wzeroes_unmap_sectors = 0;
        mddev_stack_rdev_limits(mddev, &lim, 0);
        rdev_for_each(rdev, mddev)
                queue_limits_stack_bdev(&lim, rdev->bdev, rdev->new_data_offset,
                                mddev->gendisk->disk_name);

        /*
         * Zeroing is required for discard, otherwise data could be lost.
         *
         * Consider a scenario: discard a stripe (the stripe could be
         * inconsistent if discard_zeroes_data is 0); write one disk of the
         * stripe (the stripe could be inconsistent again depending on which
         * disks are used to calculate parity); the disk is broken; The stripe
         * data of this disk is lost.
         *
         * We only allow DISCARD if the sysadmin has confirmed that only safe
         * devices are in use by setting a module parameter.  A better idea
         * might be to turn DISCARD into WRITE_ZEROES requests, as that is
         * required to be safe.
         */
        if (!devices_handle_discard_safely ||
            lim.max_discard_sectors < (stripe >> 9) ||
            lim.discard_granularity < stripe)
                lim.max_hw_discard_sectors = 0;

        /*
         * Requests require having a bitmap for each stripe.
         * Limit the max sectors based on this.
         */
        lim.max_hw_sectors = RAID5_MAX_REQ_STRIPES << RAID5_STRIPE_SHIFT(conf);
        if ((lim.max_hw_sectors << 9) < lim.io_opt)
                lim.max_hw_sectors = lim.io_opt >> 9;

        /* No restrictions on the number of segments in the request */
        lim.max_segments = USHRT_MAX;

        return queue_limits_set(mddev->gendisk->queue, &lim);
}

static int raid5_run(struct mddev *mddev)
{
        struct r5conf *conf;
        int dirty_parity_disks = 0;
        struct md_rdev *rdev;
        struct md_rdev *journal_dev = NULL;
        sector_t reshape_offset = 0;
        int i;
        long long min_offset_diff = 0;
        int first = 1;
        int ret = -EIO;

        if (mddev->resync_offset != MaxSector)
                pr_notice("md/raid:%s: not clean -- starting background reconstruction\n",
                          mdname(mddev));

        rdev_for_each(rdev, mddev) {
                long long diff;

                if (test_bit(Journal, &rdev->flags)) {
                        journal_dev = rdev;
                        continue;
                }
                if (rdev->raid_disk < 0)
                        continue;
                diff = (rdev->new_data_offset - rdev->data_offset);
                if (first) {
                        min_offset_diff = diff;
                        first = 0;
                } else if (mddev->reshape_backwards &&
                         diff < min_offset_diff)
                        min_offset_diff = diff;
                else if (!mddev->reshape_backwards &&
                         diff > min_offset_diff)
                        min_offset_diff = diff;
        }

        if ((test_bit(MD_HAS_JOURNAL, &mddev->flags) || journal_dev) &&
            (mddev->bitmap_info.offset || mddev->bitmap_info.file)) {
                pr_notice("md/raid:%s: array cannot have both journal and bitmap\n",
                          mdname(mddev));
                return -EINVAL;
        }

        if (mddev->reshape_position != MaxSector) {
                /* Check that we can continue the reshape.
                 * Difficulties arise if the stripe we would write to
                 * next is at or after the stripe we would read from next.
                 * For a reshape that changes the number of devices, this
                 * is only possible for a very short time, and mdadm makes
                 * sure that time appears to have past before assembling
                 * the array.  So we fail if that time hasn't passed.
                 * For a reshape that keeps the number of devices the same
                 * mdadm must be monitoring the reshape can keeping the
                 * critical areas read-only and backed up.  It will start
                 * the array in read-only mode, so we check for that.
                 */
                sector_t here_new, here_old;
                int old_disks;
                int max_degraded = (mddev->level == 6 ? 2 : 1);
                int chunk_sectors;
                int new_data_disks;

                if (journal_dev) {
                        pr_warn("md/raid:%s: don't support reshape with journal - aborting.\n",
                                mdname(mddev));
                        return -EINVAL;
                }

                if (mddev->new_level != mddev->level) {
                        pr_warn("md/raid:%s: unsupported reshape required - aborting.\n",
                                mdname(mddev));
                        return -EINVAL;
                }
                old_disks = mddev->raid_disks - mddev->delta_disks;
                /* reshape_position must be on a new-stripe boundary, and one
                 * further up in new geometry must map after here in old
                 * geometry.
                 * If the chunk sizes are different, then as we perform reshape
                 * in units of the largest of the two, reshape_position needs
                 * be a multiple of the largest chunk size times new data disks.
                 */
                here_new = mddev->reshape_position;
                chunk_sectors = max(mddev->chunk_sectors, mddev->new_chunk_sectors);
                new_data_disks = mddev->raid_disks - max_degraded;
                if (sector_div(here_new, chunk_sectors * new_data_disks)) {
                        pr_warn("md/raid:%s: reshape_position not on a stripe boundary\n",
                                mdname(mddev));
                        return -EINVAL;
                }
                reshape_offset = here_new * chunk_sectors;
                /* here_new is the stripe we will write to */
                here_old = mddev->reshape_position;
                sector_div(here_old, chunk_sectors * (old_disks-max_degraded));
                /* here_old is the first stripe that we might need to read
                 * from */
                if (mddev->delta_disks == 0) {
                        /* We cannot be sure it is safe to start an in-place
                         * reshape.  It is only safe if user-space is monitoring
                         * and taking constant backups.
                         * mdadm always starts a situation like this in
                         * readonly mode so it can take control before
                         * allowing any writes.  So just check for that.
                         */
                        if (abs(min_offset_diff) >= mddev->chunk_sectors &&
                            abs(min_offset_diff) >= mddev->new_chunk_sectors)
                                /* not really in-place - so OK */;
                        else if (mddev->ro == 0) {
                                pr_warn("md/raid:%s: in-place reshape must be started in read-only mode - aborting\n",
                                        mdname(mddev));
                                return -EINVAL;
                        }
                } else if (mddev->reshape_backwards
                    ? (here_new * chunk_sectors + min_offset_diff <=
                       here_old * chunk_sectors)
                    : (here_new * chunk_sectors >=
                       here_old * chunk_sectors + (-min_offset_diff))) {
                        /* Reading from the same stripe as writing to - bad */
                        pr_warn("md/raid:%s: reshape_position too early for auto-recovery - aborting.\n",
                                mdname(mddev));
                        return -EINVAL;
                }
                pr_debug("md/raid:%s: reshape will continue\n", mdname(mddev));
                /* OK, we should be able to continue; */
        } else {
                BUG_ON(mddev->level != mddev->new_level);
                BUG_ON(mddev->layout != mddev->new_layout);
                BUG_ON(mddev->chunk_sectors != mddev->new_chunk_sectors);
                BUG_ON(mddev->delta_disks != 0);
        }

        if (test_bit(MD_HAS_JOURNAL, &mddev->flags) &&
            test_bit(MD_HAS_PPL, &mddev->flags)) {
                pr_warn("md/raid:%s: using journal device and PPL not allowed - disabling PPL\n",
                        mdname(mddev));
                clear_bit(MD_HAS_PPL, &mddev->flags);
                clear_bit(MD_HAS_MULTIPLE_PPLS, &mddev->flags);
        }

        if (mddev->private == NULL)
                conf = setup_conf(mddev);
        else
                conf = mddev->private;

        if (IS_ERR(conf))
                return PTR_ERR(conf);

        if (test_bit(MD_HAS_JOURNAL, &mddev->flags)) {
                if (!journal_dev) {
                        pr_warn("md/raid:%s: journal disk is missing, force array readonly\n",
                                mdname(mddev));
                        mddev->ro = 1;
                        set_disk_ro(mddev->gendisk, 1);
                } else if (mddev->resync_offset == MaxSector)
                        set_bit(MD_JOURNAL_CLEAN, &mddev->flags);
        }

        conf->min_offset_diff = min_offset_diff;
        rcu_assign_pointer(mddev->thread, conf->thread);
        rcu_assign_pointer(conf->thread, NULL);
        mddev->private = conf;

        for (i = 0; i < conf->raid_disks && conf->previous_raid_disks;
             i++) {
                rdev = conf->disks[i].rdev;
                if (!rdev)
                        continue;
                if (conf->disks[i].replacement &&
                    conf->reshape_progress != MaxSector) {
                        /* replacements and reshape simply do not mix. */
                        pr_warn("md: cannot handle concurrent replacement and reshape.\n");
                        goto abort;
                }
                if (test_bit(In_sync, &rdev->flags))
                        continue;
                /* This disc is not fully in-sync.  However if it
                 * just stored parity (beyond the recovery_offset),
                 * when we don't need to be concerned about the
                 * array being dirty.
                 * When reshape goes 'backwards', we never have
                 * partially completed devices, so we only need
                 * to worry about reshape going forwards.
                 */
                /* Hack because v0.91 doesn't store recovery_offset properly. */
                if (mddev->major_version == 0 &&
                    mddev->minor_version > 90)
                        rdev->recovery_offset = reshape_offset;

                if (rdev->recovery_offset < reshape_offset) {
                        /* We need to check old and new layout */
                        if (!only_parity(rdev->raid_disk,
                                         conf->algorithm,
                                         conf->raid_disks,
                                         conf->max_degraded))
                                continue;
                }
                if (!only_parity(rdev->raid_disk,
                                 conf->prev_algo,
                                 conf->previous_raid_disks,
                                 conf->max_degraded))
                        continue;
                dirty_parity_disks++;
        }

        /*
         * 0 for a fully functional array, 1 or 2 for a degraded array.
         */
        mddev->degraded = raid5_calc_degraded(conf);

        if (has_failed(conf)) {
                pr_crit("md/raid:%s: not enough operational devices (%d/%d failed)\n",
                        mdname(mddev), mddev->degraded, conf->raid_disks);
                goto abort;
        }

        /* device size must be a multiple of chunk size */
        mddev->dev_sectors &= ~((sector_t)mddev->chunk_sectors - 1);
        mddev->resync_max_sectors = mddev->dev_sectors;

        if (mddev->degraded > dirty_parity_disks &&
            mddev->resync_offset != MaxSector) {
                if (test_bit(MD_HAS_PPL, &mddev->flags))
                        pr_crit("md/raid:%s: starting dirty degraded array with PPL.\n",
                                mdname(mddev));
                else if (mddev->ok_start_degraded)
                        pr_crit("md/raid:%s: starting dirty degraded array - data corruption possible.\n",
                                mdname(mddev));
                else {
                        pr_crit("md/raid:%s: cannot start dirty degraded array.\n",
                                mdname(mddev));
                        goto abort;
                }
        }

        pr_info("md/raid:%s: raid level %d active with %d out of %d devices, algorithm %d\n",
                mdname(mddev), conf->level,
                mddev->raid_disks-mddev->degraded, mddev->raid_disks,
                mddev->new_layout);

        print_raid5_conf(conf);

        if (conf->reshape_progress != MaxSector) {
                conf->reshape_safe = conf->reshape_progress;
                atomic_set(&conf->reshape_stripes, 0);
                clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
                clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
                set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
                set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
        }

        /* Ok, everything is just fine now */
        if (mddev->to_remove == &raid5_attrs_group)
                mddev->to_remove = NULL;
        else if (mddev->kobj.sd &&
            sysfs_create_group(&mddev->kobj, &raid5_attrs_group))
                pr_warn("raid5: failed to create sysfs attributes for %s\n",
                        mdname(mddev));
        md_set_array_sectors(mddev, raid5_size(mddev, 0, 0));

        if (!mddev_is_dm(mddev)) {
                ret = raid5_set_limits(mddev);
                if (ret)
                        goto abort;
        }

        ret = raid5_create_ctx_pool(conf);
        if (ret)
                goto abort;

        ret = log_init(conf, journal_dev, raid5_has_ppl(conf));
        if (ret)
                goto abort;

        return 0;
abort:
        md_unregister_thread(mddev, &mddev->thread);
        print_raid5_conf(conf);
        free_conf(conf);
        mddev->private = NULL;
        pr_warn("md/raid:%s: failed to run raid set.\n", mdname(mddev));
        return ret;
}

static void raid5_free(struct mddev *mddev, void *priv)
{
        struct r5conf *conf = priv;

        free_conf(conf);
        mddev->to_remove = &raid5_attrs_group;
}

static void raid5_status(struct seq_file *seq, struct mddev *mddev)
{
        struct r5conf *conf = mddev->private;
        int i;

        lockdep_assert_held(&mddev->lock);

        seq_printf(seq, " level %d, %dk chunk, algorithm %d", mddev->level,
                conf->chunk_sectors / 2, mddev->layout);
        seq_printf (seq, " [%d/%d] [", conf->raid_disks, conf->raid_disks - mddev->degraded);
        for (i = 0; i < conf->raid_disks; i++) {
                struct md_rdev *rdev = READ_ONCE(conf->disks[i].rdev);

                seq_printf (seq, "%s", rdev && test_bit(In_sync, &rdev->flags) ? "U" : "_");
        }
        seq_printf (seq, "]");
}

static void print_raid5_conf(struct r5conf *conf)
{
        struct md_rdev *rdev;
        int i;

        pr_debug("RAID conf printout:\n");
        if (!conf) {
                pr_debug("(conf==NULL)\n");
                return;
        }
        pr_debug(" --- level:%d rd:%d wd:%d\n", conf->level,
               conf->raid_disks,
               conf->raid_disks - conf->mddev->degraded);

        for (i = 0; i < conf->raid_disks; i++) {
                rdev = conf->disks[i].rdev;
                if (rdev)
                        pr_debug(" disk %d, o:%d, dev:%pg\n",
                               i, !test_bit(Faulty, &rdev->flags),
                               rdev->bdev);
        }
}

static int raid5_spare_active(struct mddev *mddev)
{
        int i;
        struct r5conf *conf = mddev->private;
        struct md_rdev *rdev, *replacement;
        int count = 0;
        unsigned long flags;

        for (i = 0; i < conf->raid_disks; i++) {
                rdev = conf->disks[i].rdev;
                replacement = conf->disks[i].replacement;
                if (replacement
                    && replacement->recovery_offset == MaxSector
                    && !test_bit(Faulty, &replacement->flags)
                    && !test_and_set_bit(In_sync, &replacement->flags)) {
                        /* Replacement has just become active. */
                        if (!rdev
                            || !test_and_clear_bit(In_sync, &rdev->flags))
                                count++;
                        if (rdev) {
                                /* Replaced device not technically faulty,
                                 * but we need to be sure it gets removed
                                 * and never re-added.
                                 */
                                set_bit(Faulty, &rdev->flags);
                                sysfs_notify_dirent_safe(
                                        rdev->sysfs_state);
                        }
                        sysfs_notify_dirent_safe(replacement->sysfs_state);
                } else if (rdev
                    && rdev->recovery_offset == MaxSector
                    && !test_bit(Faulty, &rdev->flags)
                    && !test_and_set_bit(In_sync, &rdev->flags)) {
                        count++;
                        sysfs_notify_dirent_safe(rdev->sysfs_state);
                }
        }
        spin_lock_irqsave(&conf->device_lock, flags);
        mddev->degraded = raid5_calc_degraded(conf);
        spin_unlock_irqrestore(&conf->device_lock, flags);
        print_raid5_conf(conf);
        return count;
}

static int raid5_remove_disk(struct mddev *mddev, struct md_rdev *rdev)
{
        struct r5conf *conf = mddev->private;
        int err = 0;
        int number = rdev->raid_disk;
        struct md_rdev **rdevp;
        struct disk_info *p;
        struct md_rdev *tmp;

        print_raid5_conf(conf);
        if (test_bit(Journal, &rdev->flags) && conf->log) {
                /*
                 * we can't wait pending write here, as this is called in
                 * raid5d, wait will deadlock.
                 * neilb: there is no locking about new writes here,
                 * so this cannot be safe.
                 */
                if (atomic_read(&conf->active_stripes) ||
                    atomic_read(&conf->r5c_cached_full_stripes) ||
                    atomic_read(&conf->r5c_cached_partial_stripes)) {
                        return -EBUSY;
                }
                log_exit(conf);
                return 0;
        }
        if (unlikely(number >= conf->pool_size))
                return 0;
        p = conf->disks + number;
        if (rdev == p->rdev)
                rdevp = &p->rdev;
        else if (rdev == p->replacement)
                rdevp = &p->replacement;
        else
                return 0;

        if (number >= conf->raid_disks &&
            conf->reshape_progress == MaxSector)
                clear_bit(In_sync, &rdev->flags);

        if (test_bit(In_sync, &rdev->flags) ||
            atomic_read(&rdev->nr_pending)) {
                err = -EBUSY;
                goto abort;
        }
        /* Only remove non-faulty devices if recovery
         * isn't possible.
         */
        if (!test_bit(Faulty, &rdev->flags) &&
            !has_failed(conf) &&
            (!p->replacement || p->replacement == rdev) &&
            number < conf->raid_disks) {
                err = -EBUSY;
                goto abort;
        }
        WRITE_ONCE(*rdevp, NULL);
        if (!err) {
                err = log_modify(conf, rdev, false);
                if (err)
                        goto abort;
        }

        tmp = p->replacement;
        if (tmp) {
                /* We must have just cleared 'rdev' */
                WRITE_ONCE(p->rdev, tmp);
                clear_bit(Replacement, &tmp->flags);
                WRITE_ONCE(p->replacement, NULL);

                if (!err)
                        err = log_modify(conf, tmp, true);
        }

        clear_bit(WantReplacement, &rdev->flags);
abort:

        print_raid5_conf(conf);
        return err;
}

static int raid5_add_disk(struct mddev *mddev, struct md_rdev *rdev)
{
        struct r5conf *conf = mddev->private;
        int ret, err = -EEXIST;
        int disk;
        struct disk_info *p;
        struct md_rdev *tmp;
        int first = 0;
        int last = conf->raid_disks - 1;

        if (test_bit(Journal, &rdev->flags)) {
                if (conf->log)
                        return -EBUSY;

                rdev->raid_disk = 0;
                /*
                 * The array is in readonly mode if journal is missing, so no
                 * write requests running. We should be safe
                 */
                ret = log_init(conf, rdev, false);
                if (ret)
                        return ret;

                ret = r5l_start(conf->log);
                if (ret)
                        return ret;

                return 0;
        }

        if (rdev->saved_raid_disk < 0 && has_failed(conf))
                /* no point adding a device */
                return -EINVAL;

        if (rdev->raid_disk >= 0)
                first = last = rdev->raid_disk;

        /*
         * find the disk ... but prefer rdev->saved_raid_disk
         * if possible.
         */
        if (rdev->saved_raid_disk >= first &&
            rdev->saved_raid_disk <= last &&
            conf->disks[rdev->saved_raid_disk].rdev == NULL)
                first = rdev->saved_raid_disk;

        for (disk = first; disk <= last; disk++) {
                p = conf->disks + disk;
                if (p->rdev == NULL) {
                        clear_bit(In_sync, &rdev->flags);
                        rdev->raid_disk = disk;
                        if (rdev->saved_raid_disk != disk)
                                conf->fullsync = 1;
                        WRITE_ONCE(p->rdev, rdev);

                        err = log_modify(conf, rdev, true);

                        goto out;
                }
        }
        for (disk = first; disk <= last; disk++) {
                p = conf->disks + disk;
                tmp = p->rdev;
                if (test_bit(WantReplacement, &tmp->flags) &&
                    mddev->reshape_position == MaxSector &&
                    p->replacement == NULL) {
                        clear_bit(In_sync, &rdev->flags);
                        set_bit(Replacement, &rdev->flags);
                        rdev->raid_disk = disk;
                        err = 0;
                        conf->fullsync = 1;
                        WRITE_ONCE(p->replacement, rdev);
                        break;
                }
        }
out:
        print_raid5_conf(conf);
        return err;
}

static int raid5_resize(struct mddev *mddev, sector_t sectors)
{
        /* no resync is happening, and there is enough space
         * on all devices, so we can resize.
         * We need to make sure resync covers any new space.
         * If the array is shrinking we should possibly wait until
         * any io in the removed space completes, but it hardly seems
         * worth it.
         */
        sector_t newsize;
        struct r5conf *conf = mddev->private;

        if (raid5_has_log(conf) || raid5_has_ppl(conf))
                return -EINVAL;
        sectors &= ~((sector_t)conf->chunk_sectors - 1);
        newsize = raid5_size(mddev, sectors, mddev->raid_disks);
        if (mddev->external_size &&
            mddev->array_sectors > newsize)
                return -EINVAL;

        if (md_bitmap_enabled(mddev, false)) {
                int ret = mddev->bitmap_ops->resize(mddev, sectors, 0);

                if (ret)
                        return ret;
        }

        md_set_array_sectors(mddev, newsize);
        if (sectors > mddev->dev_sectors &&
            mddev->resync_offset > mddev->dev_sectors) {
                mddev->resync_offset = mddev->dev_sectors;
                set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
        }
        mddev->dev_sectors = sectors;
        mddev->resync_max_sectors = sectors;
        return 0;
}

static int check_stripe_cache(struct mddev *mddev)
{
        /* Can only proceed if there are plenty of stripe_heads.
         * We need a minimum of one full stripe,, and for sensible progress
         * it is best to have about 4 times that.
         * If we require 4 times, then the default 256 4K stripe_heads will
         * allow for chunk sizes up to 256K, which is probably OK.
         * If the chunk size is greater, user-space should request more
         * stripe_heads first.
         */
        struct r5conf *conf = mddev->private;
        if (((mddev->chunk_sectors << 9) / RAID5_STRIPE_SIZE(conf)) * 4
            > conf->min_nr_stripes ||
            ((mddev->new_chunk_sectors << 9) / RAID5_STRIPE_SIZE(conf)) * 4
            > conf->min_nr_stripes) {
                pr_warn("md/raid:%s: reshape: not enough stripes.  Needed %lu\n",
                        mdname(mddev),
                        ((max(mddev->chunk_sectors, mddev->new_chunk_sectors) << 9)
                         / RAID5_STRIPE_SIZE(conf))*4);
                return 0;
        }
        return 1;
}

static int check_reshape(struct mddev *mddev)
{
        struct r5conf *conf = mddev->private;

        if (raid5_has_log(conf) || raid5_has_ppl(conf))
                return -EINVAL;
        if (mddev->delta_disks == 0 &&
            mddev->new_layout == mddev->layout &&
            mddev->new_chunk_sectors == mddev->chunk_sectors)
                return 0; /* nothing to do */
        if (has_failed(conf))
                return -EINVAL;
        if (mddev->delta_disks < 0 && mddev->reshape_position == MaxSector) {
                /* We might be able to shrink, but the devices must
                 * be made bigger first.
                 * For raid6, 4 is the minimum size.
                 * Otherwise 2 is the minimum
                 */
                int min = 2;
                if (mddev->level == 6)
                        min = 4;
                if (mddev->raid_disks + mddev->delta_disks < min)
                        return -EINVAL;
        }

        if (!check_stripe_cache(mddev))
                return -ENOSPC;

        if (mddev->new_chunk_sectors > mddev->chunk_sectors ||
            mddev->delta_disks > 0)
                if (resize_chunks(conf,
                                  conf->previous_raid_disks
                                  + max(0, mddev->delta_disks),
                                  max(mddev->new_chunk_sectors,
                                      mddev->chunk_sectors)
                            ) < 0)
                        return -ENOMEM;

        if (conf->previous_raid_disks + mddev->delta_disks <= conf->pool_size)
                return 0; /* never bother to shrink */
        return resize_stripes(conf, (conf->previous_raid_disks
                                     + mddev->delta_disks));
}

static int raid5_start_reshape(struct mddev *mddev)
{
        struct r5conf *conf = mddev->private;
        struct md_rdev *rdev;
        int spares = 0;
        int i;
        unsigned long flags;

        if (test_bit(MD_RECOVERY_RUNNING, &mddev->recovery))
                return -EBUSY;

        if (!check_stripe_cache(mddev))
                return -ENOSPC;

        if (has_failed(conf))
                return -EINVAL;

        /* raid5 can't handle concurrent reshape and recovery */
        if (mddev->resync_offset < MaxSector)
                return -EBUSY;
        for (i = 0; i < conf->raid_disks; i++)
                if (conf->disks[i].replacement)
                        return -EBUSY;

        rdev_for_each(rdev, mddev) {
                if (!test_bit(In_sync, &rdev->flags)
                    && !test_bit(Faulty, &rdev->flags))
                        spares++;
        }

        if (spares - mddev->degraded < mddev->delta_disks - conf->max_degraded)
                /* Not enough devices even to make a degraded array
                 * of that size
                 */
                return -EINVAL;

        /* Refuse to reduce size of the array.  Any reductions in
         * array size must be through explicit setting of array_size
         * attribute.
         */
        if (raid5_size(mddev, 0, conf->raid_disks + mddev->delta_disks)
            < mddev->array_sectors) {
                pr_warn("md/raid:%s: array size must be reduced before number of disks\n",
                        mdname(mddev));
                return -EINVAL;
        }

        atomic_set(&conf->reshape_stripes, 0);
        spin_lock_irq(&conf->device_lock);
        write_seqcount_begin(&conf->gen_lock);
        conf->previous_raid_disks = conf->raid_disks;
        conf->raid_disks += mddev->delta_disks;
        conf->prev_chunk_sectors = conf->chunk_sectors;
        conf->chunk_sectors = mddev->new_chunk_sectors;
        conf->prev_algo = conf->algorithm;
        conf->algorithm = mddev->new_layout;
        conf->generation++;
        /* Code that selects data_offset needs to see the generation update
         * if reshape_progress has been set - so a memory barrier needed.
         */
        smp_mb();
        if (mddev->reshape_backwards)
                conf->reshape_progress = raid5_size(mddev, 0, 0);
        else
                conf->reshape_progress = 0;
        conf->reshape_safe = conf->reshape_progress;
        write_seqcount_end(&conf->gen_lock);
        spin_unlock_irq(&conf->device_lock);

        /* Now make sure any requests that proceeded on the assumption
         * the reshape wasn't running - like Discard or Read - have
         * completed.
         */
        raid5_quiesce(mddev, true);
        raid5_quiesce(mddev, false);

        /* Add some new drives, as many as will fit.
         * We know there are enough to make the newly sized array work.
         * Don't add devices if we are reducing the number of
         * devices in the array.  This is because it is not possible
         * to correctly record the "partially reconstructed" state of
         * such devices during the reshape and confusion could result.
         */
        if (mddev->delta_disks >= 0) {
                rdev_for_each(rdev, mddev)
                        if (rdev->raid_disk < 0 &&
                            !test_bit(Faulty, &rdev->flags)) {
                                if (raid5_add_disk(mddev, rdev) == 0) {
                                        if (rdev->raid_disk
                                            >= conf->previous_raid_disks)
                                                set_bit(In_sync, &rdev->flags);
                                        else
                                                rdev->recovery_offset = 0;

                                        /* Failure here is OK */
                                        sysfs_link_rdev(mddev, rdev);
                                }
                        } else if (rdev->raid_disk >= conf->previous_raid_disks
                                   && !test_bit(Faulty, &rdev->flags)) {
                                /* This is a spare that was manually added */
                                set_bit(In_sync, &rdev->flags);
                        }

                /* When a reshape changes the number of devices,
                 * ->degraded is measured against the larger of the
                 * pre and post number of devices.
                 */
                spin_lock_irqsave(&conf->device_lock, flags);
                mddev->degraded = raid5_calc_degraded(conf);
                spin_unlock_irqrestore(&conf->device_lock, flags);
        }
        mddev->raid_disks = conf->raid_disks;
        mddev->reshape_position = conf->reshape_progress;
        set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);

        clear_bit(MD_RECOVERY_SYNC, &mddev->recovery);
        clear_bit(MD_RECOVERY_CHECK, &mddev->recovery);
        clear_bit(MD_RECOVERY_DONE, &mddev->recovery);
        set_bit(MD_RECOVERY_RESHAPE, &mddev->recovery);
        set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
        conf->reshape_checkpoint = jiffies;
        md_new_event();
        return 0;
}

/* This is called from the reshape thread and should make any
 * changes needed in 'conf'
 */
static void end_reshape(struct r5conf *conf)
{

        if (!test_bit(MD_RECOVERY_INTR, &conf->mddev->recovery)) {
                struct md_rdev *rdev;

                spin_lock_irq(&conf->device_lock);
                conf->previous_raid_disks = conf->raid_disks;
                md_finish_reshape(conf->mddev);
                smp_wmb();
                conf->reshape_progress = MaxSector;
                conf->mddev->reshape_position = MaxSector;
                rdev_for_each(rdev, conf->mddev)
                        if (rdev->raid_disk >= 0 &&
                            !test_bit(Journal, &rdev->flags) &&
                            !test_bit(In_sync, &rdev->flags))
                                rdev->recovery_offset = MaxSector;
                spin_unlock_irq(&conf->device_lock);
                wake_up(&conf->wait_for_reshape);

                mddev_update_io_opt(conf->mddev,
                        conf->raid_disks - conf->max_degraded);
        }
}

/* This is called from the raid5d thread with mddev_lock held.
 * It makes config changes to the device.
 */
static void raid5_finish_reshape(struct mddev *mddev)
{
        struct r5conf *conf = mddev->private;
        struct md_rdev *rdev;

        if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) {

                if (mddev->delta_disks <= 0) {
                        int d;
                        spin_lock_irq(&conf->device_lock);
                        mddev->degraded = raid5_calc_degraded(conf);
                        spin_unlock_irq(&conf->device_lock);
                        for (d = conf->raid_disks ;
                             d < conf->raid_disks - mddev->delta_disks;
                             d++) {
                                rdev = conf->disks[d].rdev;
                                if (rdev)
                                        clear_bit(In_sync, &rdev->flags);
                                rdev = conf->disks[d].replacement;
                                if (rdev)
                                        clear_bit(In_sync, &rdev->flags);
                        }
                }
                mddev->layout = conf->algorithm;
                mddev->chunk_sectors = conf->chunk_sectors;
                mddev->reshape_position = MaxSector;
                mddev->delta_disks = 0;
                mddev->reshape_backwards = 0;
        }
}

static void raid5_quiesce(struct mddev *mddev, int quiesce)
{
        struct r5conf *conf = mddev->private;

        if (quiesce) {
                /* stop all writes */
                lock_all_device_hash_locks_irq(conf);
                /* '2' tells resync/reshape to pause so that all
                 * active stripes can drain
                 */
                r5c_flush_cache(conf, INT_MAX);
                /* need a memory barrier to make sure read_one_chunk() sees
                 * quiesce started and reverts to slow (locked) path.
                 */
                smp_store_release(&conf->quiesce, 2);
                wait_event_cmd(conf->wait_for_quiescent,
                                    atomic_read(&conf->active_stripes) == 0 &&
                                    atomic_read(&conf->active_aligned_reads) == 0,
                                    unlock_all_device_hash_locks_irq(conf),
                                    lock_all_device_hash_locks_irq(conf));
                conf->quiesce = 1;
                unlock_all_device_hash_locks_irq(conf);
                /* allow reshape to continue */
                wake_up(&conf->wait_for_reshape);
        } else {
                /* re-enable writes */
                lock_all_device_hash_locks_irq(conf);
                conf->quiesce = 0;
                wake_up(&conf->wait_for_quiescent);
                wake_up(&conf->wait_for_reshape);
                unlock_all_device_hash_locks_irq(conf);
        }
        log_quiesce(conf, quiesce);
}

static void *raid45_takeover_raid0(struct mddev *mddev, int level)
{
        struct r0conf *raid0_conf = mddev->private;
        sector_t sectors;

        /* for raid0 takeover only one zone is supported */
        if (raid0_conf->nr_strip_zones > 1) {
                pr_warn("md/raid:%s: cannot takeover raid0 with more than one zone.\n",
                        mdname(mddev));
                return ERR_PTR(-EINVAL);
        }

        sectors = raid0_conf->strip_zone[0].zone_end;
        sector_div(sectors, raid0_conf->strip_zone[0].nb_dev);
        mddev->dev_sectors = sectors;
        mddev->new_level = level;
        mddev->new_layout = ALGORITHM_PARITY_N;
        mddev->new_chunk_sectors = mddev->chunk_sectors;
        mddev->raid_disks += 1;
        mddev->delta_disks = 1;
        /* make sure it will be not marked as dirty */
        mddev->resync_offset = MaxSector;

        return setup_conf(mddev);
}

static void *raid5_takeover_raid1(struct mddev *mddev)
{
        int chunksect;
        void *ret;

        if (mddev->raid_disks != 2 ||
            mddev->degraded > 1)
                return ERR_PTR(-EINVAL);

        /* Should check if there are write-behind devices? */

        chunksect = 64*2; /* 64K by default */

        /* The array must be an exact multiple of chunksize */
        while (chunksect && (mddev->array_sectors & (chunksect-1)))
                chunksect >>= 1;

        if ((chunksect<<9) < RAID5_STRIPE_SIZE((struct r5conf *)mddev->private))
                /* array size does not allow a suitable chunk size */
                return ERR_PTR(-EINVAL);

        mddev->new_level = 5;
        mddev->new_layout = ALGORITHM_LEFT_SYMMETRIC;
        mddev->new_chunk_sectors = chunksect;

        ret = setup_conf(mddev);
        if (!IS_ERR(ret))
                mddev_clear_unsupported_flags(mddev,
                        UNSUPPORTED_MDDEV_FLAGS);
        return ret;
}

static void *raid5_takeover_raid6(struct mddev *mddev)
{
        int new_layout;

        switch (mddev->layout) {
        case ALGORITHM_LEFT_ASYMMETRIC_6:
                new_layout = ALGORITHM_LEFT_ASYMMETRIC;
                break;
        case ALGORITHM_RIGHT_ASYMMETRIC_6:
                new_layout = ALGORITHM_RIGHT_ASYMMETRIC;
                break;
        case ALGORITHM_LEFT_SYMMETRIC_6:
                new_layout = ALGORITHM_LEFT_SYMMETRIC;
                break;
        case ALGORITHM_RIGHT_SYMMETRIC_6:
                new_layout = ALGORITHM_RIGHT_SYMMETRIC;
                break;
        case ALGORITHM_PARITY_0_6:
                new_layout = ALGORITHM_PARITY_0;
                break;
        case ALGORITHM_PARITY_N:
                new_layout = ALGORITHM_PARITY_N;
                break;
        default:
                return ERR_PTR(-EINVAL);
        }
        mddev->new_level = 5;
        mddev->new_layout = new_layout;
        mddev->delta_disks = -1;
        mddev->raid_disks -= 1;
        return setup_conf(mddev);
}

static int raid5_check_reshape(struct mddev *mddev)
{
        /* For a 2-drive array, the layout and chunk size can be changed
         * immediately as not restriping is needed.
         * For larger arrays we record the new value - after validation
         * to be used by a reshape pass.
         */
        struct r5conf *conf = mddev->private;
        int new_chunk = mddev->new_chunk_sectors;

        if (mddev->new_layout >= 0 && !algorithm_valid_raid5(mddev->new_layout))
                return -EINVAL;
        if (new_chunk > 0) {
                if (!is_power_of_2(new_chunk))
                        return -EINVAL;
                if (new_chunk < (PAGE_SIZE>>9))
                        return -EINVAL;
                if (mddev->array_sectors & (new_chunk-1))
                        /* not factor of array size */
                        return -EINVAL;
        }

        /* They look valid */

        if (mddev->raid_disks == 2) {
                /* can make the change immediately */
                if (mddev->new_layout >= 0) {
                        conf->algorithm = mddev->new_layout;
                        mddev->layout = mddev->new_layout;
                }
                if (new_chunk > 0) {
                        conf->chunk_sectors = new_chunk ;
                        mddev->chunk_sectors = new_chunk;
                }
                set_bit(MD_SB_CHANGE_DEVS, &mddev->sb_flags);
                md_wakeup_thread(mddev->thread);
        }
        return check_reshape(mddev);
}

static int raid6_check_reshape(struct mddev *mddev)
{
        int new_chunk = mddev->new_chunk_sectors;

        if (mddev->new_layout >= 0 && !algorithm_valid_raid6(mddev->new_layout))
                return -EINVAL;
        if (new_chunk > 0) {
                if (!is_power_of_2(new_chunk))
                        return -EINVAL;
                if (new_chunk < (PAGE_SIZE >> 9))
                        return -EINVAL;
                if (mddev->array_sectors & (new_chunk-1))
                        /* not factor of array size */
                        return -EINVAL;
        }

        /* They look valid */
        return check_reshape(mddev);
}

static void *raid5_takeover(struct mddev *mddev)
{
        /* raid5 can take over:
         *  raid0 - if there is only one strip zone - make it a raid4 layout
         *  raid1 - if there are two drives.  We need to know the chunk size
         *  raid4 - trivial - just use a raid4 layout.
         *  raid6 - Providing it is a *_6 layout
         */
        if (mddev->level == 0)
                return raid45_takeover_raid0(mddev, 5);
        if (mddev->level == 1)
                return raid5_takeover_raid1(mddev);
        if (mddev->level == 4) {
                mddev->new_layout = ALGORITHM_PARITY_N;
                mddev->new_level = 5;
                return setup_conf(mddev);
        }
        if (mddev->level == 6)
                return raid5_takeover_raid6(mddev);

        return ERR_PTR(-EINVAL);
}

static void *raid4_takeover(struct mddev *mddev)
{
        /* raid4 can take over:
         *  raid0 - if there is only one strip zone
         *  raid5 - if layout is right
         */
        if (mddev->level == 0)
                return raid45_takeover_raid0(mddev, 4);
        if (mddev->level == 5 &&
            mddev->layout == ALGORITHM_PARITY_N) {
                mddev->new_layout = 0;
                mddev->new_level = 4;
                return setup_conf(mddev);
        }
        return ERR_PTR(-EINVAL);
}

static struct md_personality raid5_personality;

static void *raid6_takeover(struct mddev *mddev)
{
        /* Currently can only take over a raid5.  We map the
         * personality to an equivalent raid6 personality
         * with the Q block at the end.
         */
        int new_layout;

        if (mddev->pers != &raid5_personality)
                return ERR_PTR(-EINVAL);
        if (mddev->degraded > 1)
                return ERR_PTR(-EINVAL);
        if (mddev->raid_disks > 253)
                return ERR_PTR(-EINVAL);
        if (mddev->raid_disks < 3)
                return ERR_PTR(-EINVAL);

        switch (mddev->layout) {
        case ALGORITHM_LEFT_ASYMMETRIC:
                new_layout = ALGORITHM_LEFT_ASYMMETRIC_6;
                break;
        case ALGORITHM_RIGHT_ASYMMETRIC:
                new_layout = ALGORITHM_RIGHT_ASYMMETRIC_6;
                break;
        case ALGORITHM_LEFT_SYMMETRIC:
                new_layout = ALGORITHM_LEFT_SYMMETRIC_6;
                break;
        case ALGORITHM_RIGHT_SYMMETRIC:
                new_layout = ALGORITHM_RIGHT_SYMMETRIC_6;
                break;
        case ALGORITHM_PARITY_0:
                new_layout = ALGORITHM_PARITY_0_6;
                break;
        case ALGORITHM_PARITY_N:
                new_layout = ALGORITHM_PARITY_N;
                break;
        default:
                return ERR_PTR(-EINVAL);
        }
        mddev->new_level = 6;
        mddev->new_layout = new_layout;
        mddev->delta_disks = 1;
        mddev->raid_disks += 1;
        return setup_conf(mddev);
}

static int raid5_change_consistency_policy(struct mddev *mddev, const char *buf)
{
        struct r5conf *conf;
        int err;

        err = mddev_suspend_and_lock(mddev);
        if (err)
                return err;
        conf = mddev->private;
        if (!conf) {
                mddev_unlock_and_resume(mddev);
                return -ENODEV;
        }

        if (strncmp(buf, "ppl", 3) == 0) {
                /* ppl only works with RAID 5 */
                if (!raid5_has_ppl(conf) && conf->level == 5) {
                        err = log_init(conf, NULL, true);
                        if (!err) {
                                err = resize_stripes(conf, conf->pool_size);
                                if (err)
                                        log_exit(conf);
                        }
                } else
                        err = -EINVAL;
        } else if (strncmp(buf, "resync", 6) == 0) {
                if (raid5_has_ppl(conf)) {
                        log_exit(conf);
                        err = resize_stripes(conf, conf->pool_size);
                } else if (test_bit(MD_HAS_JOURNAL, &conf->mddev->flags) &&
                           r5l_log_disk_error(conf)) {
                        bool journal_dev_exists = false;
                        struct md_rdev *rdev;

                        rdev_for_each(rdev, mddev)
                                if (test_bit(Journal, &rdev->flags)) {
                                        journal_dev_exists = true;
                                        break;
                                }

                        if (!journal_dev_exists)
                                clear_bit(MD_HAS_JOURNAL, &mddev->flags);
                        else  /* need remove journal device first */
                                err = -EBUSY;
                } else
                        err = -EINVAL;
        } else {
                err = -EINVAL;
        }

        if (!err)
                md_update_sb(mddev, 1);

        mddev_unlock_and_resume(mddev);

        return err;
}

static int raid5_start(struct mddev *mddev)
{
        struct r5conf *conf = mddev->private;

        return r5l_start(conf->log);
}

/*
 * This is only used for dm-raid456, caller already frozen sync_thread, hence
 * if rehsape is still in progress, io that is waiting for reshape can never be
 * done now, hence wake up and handle those IO.
 */
static void raid5_prepare_suspend(struct mddev *mddev)
{
        struct r5conf *conf = mddev->private;

        wake_up(&conf->wait_for_reshape);
}

static struct md_personality raid6_personality =
{
        .head = {
                .type   = MD_PERSONALITY,
                .id     = ID_RAID6,
                .name   = "raid6",
                .owner  = THIS_MODULE,
        },

        .make_request   = raid5_make_request,
        .run            = raid5_run,
        .start          = raid5_start,
        .free           = raid5_free,
        .status         = raid5_status,
        .error_handler  = raid5_error,
        .hot_add_disk   = raid5_add_disk,
        .hot_remove_disk= raid5_remove_disk,
        .spare_active   = raid5_spare_active,
        .sync_request   = raid5_sync_request,
        .resize         = raid5_resize,
        .size           = raid5_size,
        .check_reshape  = raid6_check_reshape,
        .start_reshape  = raid5_start_reshape,
        .finish_reshape = raid5_finish_reshape,
        .quiesce        = raid5_quiesce,
        .takeover       = raid6_takeover,
        .change_consistency_policy = raid5_change_consistency_policy,
        .prepare_suspend = raid5_prepare_suspend,
        .bitmap_sector  = raid5_bitmap_sector,
};
static struct md_personality raid5_personality =
{
        .head = {
                .type   = MD_PERSONALITY,
                .id     = ID_RAID5,
                .name   = "raid5",
                .owner  = THIS_MODULE,
        },

        .make_request   = raid5_make_request,
        .run            = raid5_run,
        .start          = raid5_start,
        .free           = raid5_free,
        .status         = raid5_status,
        .error_handler  = raid5_error,
        .hot_add_disk   = raid5_add_disk,
        .hot_remove_disk= raid5_remove_disk,
        .spare_active   = raid5_spare_active,
        .sync_request   = raid5_sync_request,
        .resize         = raid5_resize,
        .size           = raid5_size,
        .check_reshape  = raid5_check_reshape,
        .start_reshape  = raid5_start_reshape,
        .finish_reshape = raid5_finish_reshape,
        .quiesce        = raid5_quiesce,
        .takeover       = raid5_takeover,
        .change_consistency_policy = raid5_change_consistency_policy,
        .prepare_suspend = raid5_prepare_suspend,
        .bitmap_sector  = raid5_bitmap_sector,
};

static struct md_personality raid4_personality =
{
        .head = {
                .type   = MD_PERSONALITY,
                .id     = ID_RAID4,
                .name   = "raid4",
                .owner  = THIS_MODULE,
        },

        .make_request   = raid5_make_request,
        .run            = raid5_run,
        .start          = raid5_start,
        .free           = raid5_free,
        .status         = raid5_status,
        .error_handler  = raid5_error,
        .hot_add_disk   = raid5_add_disk,
        .hot_remove_disk= raid5_remove_disk,
        .spare_active   = raid5_spare_active,
        .sync_request   = raid5_sync_request,
        .resize         = raid5_resize,
        .size           = raid5_size,
        .check_reshape  = raid5_check_reshape,
        .start_reshape  = raid5_start_reshape,
        .finish_reshape = raid5_finish_reshape,
        .quiesce        = raid5_quiesce,
        .takeover       = raid4_takeover,
        .change_consistency_policy = raid5_change_consistency_policy,
        .prepare_suspend = raid5_prepare_suspend,
        .bitmap_sector  = raid5_bitmap_sector,
};

static int __init raid5_init(void)
{
        int ret;

        raid5_wq = alloc_workqueue("raid5wq",
                WQ_UNBOUND|WQ_MEM_RECLAIM|WQ_SYSFS, 0);
        if (!raid5_wq)
                return -ENOMEM;

        ret = cpuhp_setup_state_multi(CPUHP_MD_RAID5_PREPARE,
                                      "md/raid5:prepare",
                                      raid456_cpu_up_prepare,
                                      raid456_cpu_dead);
        if (ret)
                goto err_destroy_wq;

        ret = register_md_submodule(&raid6_personality.head);
        if (ret)
                goto err_cpuhp_remove;

        ret = register_md_submodule(&raid5_personality.head);
        if (ret)
                goto err_unregister_raid6;

        ret = register_md_submodule(&raid4_personality.head);
        if (ret)
                goto err_unregister_raid5;

        return 0;

err_unregister_raid5:
        unregister_md_submodule(&raid5_personality.head);
err_unregister_raid6:
        unregister_md_submodule(&raid6_personality.head);
err_cpuhp_remove:
        cpuhp_remove_multi_state(CPUHP_MD_RAID5_PREPARE);
err_destroy_wq:
        destroy_workqueue(raid5_wq);
        return ret;
}

static void __exit raid5_exit(void)
{
        unregister_md_submodule(&raid6_personality.head);
        unregister_md_submodule(&raid5_personality.head);
        unregister_md_submodule(&raid4_personality.head);
        cpuhp_remove_multi_state(CPUHP_MD_RAID5_PREPARE);
        destroy_workqueue(raid5_wq);
}

module_init(raid5_init);
module_exit(raid5_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("RAID4/5/6 (striping with parity) personality for MD");
MODULE_ALIAS("md-personality-4"); /* RAID5 */
MODULE_ALIAS("md-raid5");
MODULE_ALIAS("md-raid4");
MODULE_ALIAS("md-level-5");
MODULE_ALIAS("md-level-4");
MODULE_ALIAS("md-personality-8"); /* RAID6 */
MODULE_ALIAS("md-raid6");
MODULE_ALIAS("md-level-6");

/* This used to be two separate modules, they were: */
MODULE_ALIAS("raid5");
MODULE_ALIAS("raid6");