// SPDX-License-Identifier: GPL-2.0+
/*
 * Marvell Armada 37xx SoC Peripheral clocks
 *
 * Copyright (C) 2016 Marvell
 *
 * Gregory CLEMENT <gregory.clement@free-electrons.com>
 *
 * Most of the peripheral clocks can be modelled like this:
 *             _____    _______    _______
 * TBG-A-P  --|     |  |       |  |       |   ______
 * TBG-B-P  --| Mux |--| /div1 |--| /div2 |--| Gate |--> perip_clk
 * TBG-A-S  --|     |  |       |  |       |  |______|
 * TBG-B-S  --|_____|  |_______|  |_______|
 *
 * However some clocks may use only one or two block or and use the
 * xtal clock as parent.
 */

#include <linux/clk-provider.h>
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#include <linux/jiffies.h>

#define TBG_SEL         0x0
#define DIV_SEL0        0x4
#define DIV_SEL1        0x8
#define DIV_SEL2        0xC
#define CLK_SEL         0x10
#define CLK_DIS         0x14

#define  ARMADA_37XX_DVFS_LOAD_1 1
#define LOAD_LEVEL_NR   4

#define ARMADA_37XX_NB_L0L1     0x18
#define ARMADA_37XX_NB_L2L3     0x1C
#define         ARMADA_37XX_NB_TBG_DIV_OFF      13
#define         ARMADA_37XX_NB_TBG_DIV_MASK     0x7
#define         ARMADA_37XX_NB_CLK_SEL_OFF      11
#define         ARMADA_37XX_NB_CLK_SEL_MASK     0x1
#define         ARMADA_37XX_NB_TBG_SEL_OFF      9
#define         ARMADA_37XX_NB_TBG_SEL_MASK     0x3
#define         ARMADA_37XX_NB_CONFIG_SHIFT     16
#define ARMADA_37XX_NB_DYN_MOD  0x24
#define         ARMADA_37XX_NB_DFS_EN   31
#define ARMADA_37XX_NB_CPU_LOAD 0x30
#define         ARMADA_37XX_NB_CPU_LOAD_MASK    0x3
#define         ARMADA_37XX_DVFS_LOAD_0         0
#define         ARMADA_37XX_DVFS_LOAD_1         1
#define         ARMADA_37XX_DVFS_LOAD_2         2
#define         ARMADA_37XX_DVFS_LOAD_3         3

struct clk_periph_driver_data {
        struct clk_hw_onecell_data *hw_data;
        spinlock_t lock;
        void __iomem *reg;

        /* Storage registers for suspend/resume operations */
        u32 tbg_sel;
        u32 div_sel0;
        u32 div_sel1;
        u32 div_sel2;
        u32 clk_sel;
        u32 clk_dis;
};

struct clk_double_div {
        struct clk_hw hw;
        void __iomem *reg1;
        u8 shift1;
        void __iomem *reg2;
        u8 shift2;
};

struct clk_pm_cpu {
        struct clk_hw hw;
        void __iomem *reg_mux;
        u8 shift_mux;
        u32 mask_mux;
        void __iomem *reg_div;
        u8 shift_div;
        struct regmap *nb_pm_base;
        unsigned long l1_expiration;
};

#define to_clk_double_div(_hw) container_of(_hw, struct clk_double_div, hw)
#define to_clk_pm_cpu(_hw) container_of(_hw, struct clk_pm_cpu, hw)

struct clk_periph_data {
        const char *name;
        const char * const *parent_names;
        int num_parents;
        struct clk_hw *mux_hw;
        struct clk_hw *rate_hw;
        struct clk_hw *gate_hw;
        struct clk_hw *muxrate_hw;
        bool is_double_div;
};

static const struct clk_div_table clk_table6[] = {
        { .val = 1, .div = 1, },
        { .val = 2, .div = 2, },
        { .val = 3, .div = 3, },
        { .val = 4, .div = 4, },
        { .val = 5, .div = 5, },
        { .val = 6, .div = 6, },
        { .val = 0, .div = 0, }, /* last entry */
};

static const struct clk_div_table clk_table1[] = {
        { .val = 0, .div = 1, },
        { .val = 1, .div = 2, },
        { .val = 0, .div = 0, }, /* last entry */
};

static const struct clk_div_table clk_table2[] = {
        { .val = 0, .div = 2, },
        { .val = 1, .div = 4, },
        { .val = 0, .div = 0, }, /* last entry */
};

static const struct clk_ops clk_double_div_ops;
static const struct clk_ops clk_pm_cpu_ops;

#define PERIPH_GATE(_name, _bit)                \
struct clk_gate gate_##_name = {                \
        .reg = (void *)CLK_DIS,                 \
        .bit_idx = _bit,                        \
        .hw.init = &(struct clk_init_data){     \
                .ops =  &clk_gate_ops,          \
        }                                       \
};

#define PERIPH_MUX(_name, _shift)               \
struct clk_mux mux_##_name = {                  \
        .reg = (void *)TBG_SEL,                 \
        .shift = _shift,                        \
        .mask = 3,                              \
        .hw.init = &(struct clk_init_data){     \
                .ops =  &clk_mux_ro_ops,        \
        }                                       \
};

#define PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2) \
struct clk_double_div rate_##_name = {          \
        .reg1 = (void *)_reg1,                  \
        .reg2 = (void *)_reg2,                  \
        .shift1 = _shift1,                      \
        .shift2 = _shift2,                      \
        .hw.init = &(struct clk_init_data){     \
                .ops =  &clk_double_div_ops,    \
        }                                       \
};

#define PERIPH_DIV(_name, _reg, _shift, _table) \
struct clk_divider rate_##_name = {             \
        .reg = (void *)_reg,                    \
        .table = _table,                        \
        .shift = _shift,                        \
        .hw.init = &(struct clk_init_data){     \
                .ops =  &clk_divider_ro_ops,    \
        }                                       \
};

#define PERIPH_PM_CPU(_name, _shift1, _reg, _shift2)    \
struct clk_pm_cpu muxrate_##_name = {           \
        .reg_mux = (void *)TBG_SEL,             \
        .mask_mux = 3,                          \
        .shift_mux = _shift1,                   \
        .reg_div = (void *)_reg,                \
        .shift_div = _shift2,                   \
        .hw.init = &(struct clk_init_data){     \
                .ops =  &clk_pm_cpu_ops,        \
        }                                       \
};

#define PERIPH_CLK_FULL_DD(_name, _bit, _shift, _reg1, _reg2, _shift1, _shift2)\
static PERIPH_GATE(_name, _bit);                            \
static PERIPH_MUX(_name, _shift);                           \
static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2);

#define PERIPH_CLK_FULL(_name, _bit, _shift, _reg, _shift1, _table)     \
static PERIPH_GATE(_name, _bit);                            \
static PERIPH_MUX(_name, _shift);                           \
static PERIPH_DIV(_name, _reg, _shift1, _table);

#define PERIPH_CLK_GATE_DIV(_name, _bit,  _reg, _shift, _table) \
static PERIPH_GATE(_name, _bit);                        \
static PERIPH_DIV(_name, _reg, _shift, _table);

#define PERIPH_CLK_MUX_DD(_name, _shift, _reg1, _reg2, _shift1, _shift2)\
static PERIPH_MUX(_name, _shift);                           \
static PERIPH_DOUBLEDIV(_name, _reg1, _reg2, _shift1, _shift2);

#define REF_CLK_FULL(_name)                             \
        { .name = #_name,                               \
          .parent_names = (const char *[]){ "TBG-A-P",  \
              "TBG-B-P", "TBG-A-S", "TBG-B-S"},         \
          .num_parents = 4,                             \
          .mux_hw = &mux_##_name.hw,                    \
          .gate_hw = &gate_##_name.hw,                  \
          .rate_hw = &rate_##_name.hw,                  \
        }

#define REF_CLK_FULL_DD(_name)                          \
        { .name = #_name,                               \
          .parent_names = (const char *[]){ "TBG-A-P",  \
              "TBG-B-P", "TBG-A-S", "TBG-B-S"},         \
          .num_parents = 4,                             \
          .mux_hw = &mux_##_name.hw,                    \
          .gate_hw = &gate_##_name.hw,                  \
          .rate_hw = &rate_##_name.hw,                  \
          .is_double_div = true,                        \
        }

#define REF_CLK_GATE(_name, _parent_name)                       \
        { .name = #_name,                                       \
          .parent_names = (const char *[]){ _parent_name},      \
          .num_parents = 1,                                     \
          .gate_hw = &gate_##_name.hw,                          \
        }

#define REF_CLK_GATE_DIV(_name, _parent_name)                   \
        { .name = #_name,                                       \
          .parent_names = (const char *[]){ _parent_name},      \
          .num_parents = 1,                                     \
          .gate_hw = &gate_##_name.hw,                          \
          .rate_hw = &rate_##_name.hw,                          \
        }

#define REF_CLK_PM_CPU(_name)                           \
        { .name = #_name,                               \
          .parent_names = (const char *[]){ "TBG-A-P",  \
              "TBG-B-P", "TBG-A-S", "TBG-B-S"},         \
          .num_parents = 4,                             \
          .muxrate_hw = &muxrate_##_name.hw,            \
        }

#define REF_CLK_MUX_DD(_name)                           \
        { .name = #_name,                               \
          .parent_names = (const char *[]){ "TBG-A-P",  \
              "TBG-B-P", "TBG-A-S", "TBG-B-S"},         \
          .num_parents = 4,                             \
          .mux_hw = &mux_##_name.hw,                    \
          .rate_hw = &rate_##_name.hw,                  \
          .is_double_div = true,                        \
        }

/* NB periph clocks */
PERIPH_CLK_FULL_DD(mmc, 2, 0, DIV_SEL2, DIV_SEL2, 16, 13);
PERIPH_CLK_FULL_DD(sata_host, 3, 2, DIV_SEL2, DIV_SEL2, 10, 7);
PERIPH_CLK_FULL_DD(sec_at, 6, 4, DIV_SEL1, DIV_SEL1, 3, 0);
PERIPH_CLK_FULL_DD(sec_dap, 7, 6, DIV_SEL1, DIV_SEL1, 9, 6);
PERIPH_CLK_FULL_DD(tscem, 8, 8, DIV_SEL1, DIV_SEL1, 15, 12);
PERIPH_CLK_FULL(tscem_tmx, 10, 10, DIV_SEL1, 18, clk_table6);
static PERIPH_GATE(avs, 11);
PERIPH_CLK_FULL_DD(pwm, 13, 14, DIV_SEL0, DIV_SEL0, 3, 0);
PERIPH_CLK_FULL_DD(sqf, 12, 12, DIV_SEL1, DIV_SEL1, 27, 24);
static PERIPH_GATE(i2c_2, 16);
static PERIPH_GATE(i2c_1, 17);
PERIPH_CLK_GATE_DIV(ddr_phy, 19, DIV_SEL0, 18, clk_table2);
PERIPH_CLK_FULL_DD(ddr_fclk, 21, 16, DIV_SEL0, DIV_SEL0, 15, 12);
PERIPH_CLK_FULL(trace, 22, 18, DIV_SEL0, 20, clk_table6);
PERIPH_CLK_FULL(counter, 23, 20, DIV_SEL0, 23, clk_table6);
PERIPH_CLK_FULL_DD(eip97, 24, 24, DIV_SEL2, DIV_SEL2, 22, 19);
static PERIPH_PM_CPU(cpu, 22, DIV_SEL0, 28);

static struct clk_periph_data data_nb[] = {
        REF_CLK_FULL_DD(mmc),
        REF_CLK_FULL_DD(sata_host),
        REF_CLK_FULL_DD(sec_at),
        REF_CLK_FULL_DD(sec_dap),
        REF_CLK_FULL_DD(tscem),
        REF_CLK_FULL(tscem_tmx),
        REF_CLK_GATE(avs, "xtal"),
        REF_CLK_FULL_DD(sqf),
        REF_CLK_FULL_DD(pwm),
        REF_CLK_GATE(i2c_2, "xtal"),
        REF_CLK_GATE(i2c_1, "xtal"),
        REF_CLK_GATE_DIV(ddr_phy, "TBG-A-S"),
        REF_CLK_FULL_DD(ddr_fclk),
        REF_CLK_FULL(trace),
        REF_CLK_FULL(counter),
        REF_CLK_FULL_DD(eip97),
        REF_CLK_PM_CPU(cpu),
        { },
};

/* SB periph clocks */
PERIPH_CLK_MUX_DD(gbe_50, 6, DIV_SEL2, DIV_SEL2, 6, 9);
PERIPH_CLK_MUX_DD(gbe_core, 8, DIV_SEL1, DIV_SEL1, 18, 21);
PERIPH_CLK_MUX_DD(gbe_125, 10, DIV_SEL1, DIV_SEL1, 6, 9);
static PERIPH_GATE(gbe1_50, 0);
static PERIPH_GATE(gbe0_50, 1);
static PERIPH_GATE(gbe1_125, 2);
static PERIPH_GATE(gbe0_125, 3);
PERIPH_CLK_GATE_DIV(gbe1_core, 4, DIV_SEL1, 13, clk_table1);
PERIPH_CLK_GATE_DIV(gbe0_core, 5, DIV_SEL1, 14, clk_table1);
PERIPH_CLK_GATE_DIV(gbe_bm, 12, DIV_SEL1, 0, clk_table1);
PERIPH_CLK_FULL_DD(sdio, 11, 14, DIV_SEL0, DIV_SEL0, 3, 6);
PERIPH_CLK_FULL_DD(usb32_usb2_sys, 16, 16, DIV_SEL0, DIV_SEL0, 9, 12);
PERIPH_CLK_FULL_DD(usb32_ss_sys, 17, 18, DIV_SEL0, DIV_SEL0, 15, 18);
static PERIPH_GATE(pcie, 14);

static struct clk_periph_data data_sb[] = {
        REF_CLK_MUX_DD(gbe_50),
        REF_CLK_MUX_DD(gbe_core),
        REF_CLK_MUX_DD(gbe_125),
        REF_CLK_GATE(gbe1_50, "gbe_50"),
        REF_CLK_GATE(gbe0_50, "gbe_50"),
        REF_CLK_GATE(gbe1_125, "gbe_125"),
        REF_CLK_GATE(gbe0_125, "gbe_125"),
        REF_CLK_GATE_DIV(gbe1_core, "gbe_core"),
        REF_CLK_GATE_DIV(gbe0_core, "gbe_core"),
        REF_CLK_GATE_DIV(gbe_bm, "gbe_core"),
        REF_CLK_FULL_DD(sdio),
        REF_CLK_FULL_DD(usb32_usb2_sys),
        REF_CLK_FULL_DD(usb32_ss_sys),
        REF_CLK_GATE(pcie, "gbe_core"),
        { },
};

static unsigned int get_div(void __iomem *reg, int shift)
{
        u32 val;

        val = (readl(reg) >> shift) & 0x7;
        if (val > 6)
                return 0;
        return val;
}

static unsigned long clk_double_div_recalc_rate(struct clk_hw *hw,
                                                unsigned long parent_rate)
{
        struct clk_double_div *double_div = to_clk_double_div(hw);
        unsigned int div;

        div = get_div(double_div->reg1, double_div->shift1);
        div *= get_div(double_div->reg2, double_div->shift2);

        return DIV_ROUND_UP_ULL((u64)parent_rate, div);
}

static const struct clk_ops clk_double_div_ops = {
        .recalc_rate = clk_double_div_recalc_rate,
};

static void armada_3700_pm_dvfs_update_regs(unsigned int load_level,
                                            unsigned int *reg,
                                            unsigned int *offset)
{
        if (load_level <= ARMADA_37XX_DVFS_LOAD_1)
                *reg = ARMADA_37XX_NB_L0L1;
        else
                *reg = ARMADA_37XX_NB_L2L3;

        if (load_level == ARMADA_37XX_DVFS_LOAD_0 ||
            load_level ==  ARMADA_37XX_DVFS_LOAD_2)
                *offset += ARMADA_37XX_NB_CONFIG_SHIFT;
}

static bool armada_3700_pm_dvfs_is_enabled(struct regmap *base)
{
        unsigned int val, reg = ARMADA_37XX_NB_DYN_MOD;

        if (IS_ERR(base))
                return false;

        regmap_read(base, reg, &val);

        return !!(val & BIT(ARMADA_37XX_NB_DFS_EN));
}

static unsigned int armada_3700_pm_dvfs_get_cpu_div(struct regmap *base)
{
        unsigned int reg = ARMADA_37XX_NB_CPU_LOAD;
        unsigned int offset = ARMADA_37XX_NB_TBG_DIV_OFF;
        unsigned int load_level, div;

        /*
         * This function is always called after the function
         * armada_3700_pm_dvfs_is_enabled, so no need to check again
         * if the base is valid.
         */
        regmap_read(base, reg, &load_level);

        /*
         * The register and the offset inside this register accessed to
         * read the current divider depend on the load level
         */
        load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
        armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);

        regmap_read(base, reg, &div);

        return (div >> offset) & ARMADA_37XX_NB_TBG_DIV_MASK;
}

static unsigned int armada_3700_pm_dvfs_get_cpu_parent(struct regmap *base)
{
        unsigned int reg = ARMADA_37XX_NB_CPU_LOAD;
        unsigned int offset = ARMADA_37XX_NB_TBG_SEL_OFF;
        unsigned int load_level, sel;

        /*
         * This function is always called after the function
         * armada_3700_pm_dvfs_is_enabled, so no need to check again
         * if the base is valid
         */
        regmap_read(base, reg, &load_level);

        /*
         * The register and the offset inside this register accessed to
         * read the current divider depend on the load level
         */
        load_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;
        armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);

        regmap_read(base, reg, &sel);

        return (sel >> offset) & ARMADA_37XX_NB_TBG_SEL_MASK;
}

static u8 clk_pm_cpu_get_parent(struct clk_hw *hw)
{
        struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
        u32 val;

        if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base)) {
                val = armada_3700_pm_dvfs_get_cpu_parent(pm_cpu->nb_pm_base);
        } else {
                val = readl(pm_cpu->reg_mux) >> pm_cpu->shift_mux;
                val &= pm_cpu->mask_mux;
        }

        return val;
}

static unsigned long clk_pm_cpu_recalc_rate(struct clk_hw *hw,
                                            unsigned long parent_rate)
{
        struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
        unsigned int div;

        if (armada_3700_pm_dvfs_is_enabled(pm_cpu->nb_pm_base))
                div = armada_3700_pm_dvfs_get_cpu_div(pm_cpu->nb_pm_base);
        else
                div = get_div(pm_cpu->reg_div, pm_cpu->shift_div);
        return DIV_ROUND_UP_ULL((u64)parent_rate, div);
}

static int clk_pm_cpu_determine_rate(struct clk_hw *hw,
                                     struct clk_rate_request *req)
{
        struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
        struct regmap *base = pm_cpu->nb_pm_base;
        unsigned int div = req->best_parent_rate / req->rate;
        unsigned int load_level;
        /* only available when DVFS is enabled */
        if (!armada_3700_pm_dvfs_is_enabled(base))
                return -EINVAL;

        for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
                unsigned int reg, val, offset = ARMADA_37XX_NB_TBG_DIV_OFF;

                armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);

                regmap_read(base, reg, &val);

                val >>= offset;
                val &= ARMADA_37XX_NB_TBG_DIV_MASK;
                if (val == div) {
                        /*
                         * We found a load level matching the target
                         * divider, switch to this load level and
                         * return.
                         */
                        req->rate = req->best_parent_rate / div;

                        return 0;
                }
        }

        /* We didn't find any valid divider */
        return -EINVAL;
}

/*
 * Workaround when base CPU frequnecy is 1000 or 1200 MHz
 *
 * Switching the CPU from the L2 or L3 frequencies (250/300 or 200 MHz
 * respectively) to L0 frequency (1/1.2 GHz) requires a significant
 * amount of time to let VDD stabilize to the appropriate
 * voltage. This amount of time is large enough that it cannot be
 * covered by the hardware countdown register. Due to this, the CPU
 * might start operating at L0 before the voltage is stabilized,
 * leading to CPU stalls.
 *
 * To work around this problem, we prevent switching directly from the
 * L2/L3 frequencies to the L0 frequency, and instead switch to the L1
 * frequency in-between. The sequence therefore becomes:
 * 1. First switch from L2/L3 (200/250/300 MHz) to L1 (500/600 MHz)
 * 2. Sleep 20ms for stabling VDD voltage
 * 3. Then switch from L1 (500/600 MHz) to L0 (1000/1200 MHz).
 */
static void clk_pm_cpu_set_rate_wa(struct clk_pm_cpu *pm_cpu,
                                   unsigned int new_level, unsigned long rate,
                                   struct regmap *base)
{
        unsigned int cur_level;

        regmap_read(base, ARMADA_37XX_NB_CPU_LOAD, &cur_level);
        cur_level &= ARMADA_37XX_NB_CPU_LOAD_MASK;

        if (cur_level == new_level)
                return;

        /*
         * System wants to go to L1 on its own. If we are going from L2/L3,
         * remember when 20ms will expire. If from L0, set the value so that
         * next switch to L0 won't have to wait.
         */
        if (new_level == ARMADA_37XX_DVFS_LOAD_1) {
                if (cur_level == ARMADA_37XX_DVFS_LOAD_0)
                        pm_cpu->l1_expiration = jiffies;
                else
                        pm_cpu->l1_expiration = jiffies + msecs_to_jiffies(20);
                return;
        }

        /*
         * If we are setting to L2/L3, just invalidate L1 expiration time,
         * sleeping is not needed.
         */
        if (rate < 1000*1000*1000)
                goto invalidate_l1_exp;

        /*
         * We are going to L0 with rate >= 1GHz. Check whether we have been at
         * L1 for long enough time. If not, go to L1 for 20ms.
         */
        if (pm_cpu->l1_expiration && time_is_before_eq_jiffies(pm_cpu->l1_expiration))
                goto invalidate_l1_exp;

        regmap_update_bits(base, ARMADA_37XX_NB_CPU_LOAD,
                           ARMADA_37XX_NB_CPU_LOAD_MASK,
                           ARMADA_37XX_DVFS_LOAD_1);
        msleep(20);

invalidate_l1_exp:
        pm_cpu->l1_expiration = 0;
}

static int clk_pm_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
                               unsigned long parent_rate)
{
        struct clk_pm_cpu *pm_cpu = to_clk_pm_cpu(hw);
        struct regmap *base = pm_cpu->nb_pm_base;
        unsigned int div = parent_rate / rate;
        unsigned int load_level;

        /* only available when DVFS is enabled */
        if (!armada_3700_pm_dvfs_is_enabled(base))
                return -EINVAL;

        for (load_level = 0; load_level < LOAD_LEVEL_NR; load_level++) {
                unsigned int reg, mask, val,
                        offset = ARMADA_37XX_NB_TBG_DIV_OFF;

                armada_3700_pm_dvfs_update_regs(load_level, &reg, &offset);

                regmap_read(base, reg, &val);
                val >>= offset;
                val &= ARMADA_37XX_NB_TBG_DIV_MASK;

                if (val == div) {
                        /*
                         * We found a load level matching the target
                         * divider, switch to this load level and
                         * return.
                         */
                        reg = ARMADA_37XX_NB_CPU_LOAD;
                        mask = ARMADA_37XX_NB_CPU_LOAD_MASK;

                        /* Apply workaround when base CPU frequency is 1000 or 1200 MHz */
                        if (parent_rate >= 1000*1000*1000)
                                clk_pm_cpu_set_rate_wa(pm_cpu, load_level, rate, base);

                        regmap_update_bits(base, reg, mask, load_level);

                        return rate;
                }
        }

        /* We didn't find any valid divider */
        return -EINVAL;
}

static const struct clk_ops clk_pm_cpu_ops = {
        .get_parent = clk_pm_cpu_get_parent,
        .determine_rate = clk_pm_cpu_determine_rate,
        .set_rate = clk_pm_cpu_set_rate,
        .recalc_rate = clk_pm_cpu_recalc_rate,
};

static const struct of_device_id armada_3700_periph_clock_of_match[] = {
        { .compatible = "marvell,armada-3700-periph-clock-nb",
          .data = data_nb, },
        { .compatible = "marvell,armada-3700-periph-clock-sb",
        .data = data_sb, },
        { }
};

static int armada_3700_add_composite_clk(const struct clk_periph_data *data,
                                         void __iomem *reg, spinlock_t *lock,
                                         struct device *dev, struct clk_hw **hw)
{
        const struct clk_ops *mux_ops = NULL, *gate_ops = NULL,
                *rate_ops = NULL;
        struct clk_hw *mux_hw = NULL, *gate_hw = NULL, *rate_hw = NULL;

        if (data->mux_hw) {
                struct clk_mux *mux;

                mux_hw = data->mux_hw;
                mux = to_clk_mux(mux_hw);
                mux->lock = lock;
                mux_ops = mux_hw->init->ops;
                mux->reg = reg + (u64)mux->reg;
        }

        if (data->gate_hw) {
                struct clk_gate *gate;

                gate_hw = data->gate_hw;
                gate = to_clk_gate(gate_hw);
                gate->lock = lock;
                gate_ops = gate_hw->init->ops;
                gate->reg = reg + (u64)gate->reg;
                gate->flags = CLK_GATE_SET_TO_DISABLE;
        }

        if (data->rate_hw) {
                rate_hw = data->rate_hw;
                rate_ops = rate_hw->init->ops;
                if (data->is_double_div) {
                        struct clk_double_div *rate;

                        rate =  to_clk_double_div(rate_hw);
                        rate->reg1 = reg + (u64)rate->reg1;
                        rate->reg2 = reg + (u64)rate->reg2;
                } else {
                        struct clk_divider *rate = to_clk_divider(rate_hw);
                        const struct clk_div_table *clkt;
                        int table_size = 0;

                        rate->reg = reg + (u64)rate->reg;
                        for (clkt = rate->table; clkt->div; clkt++)
                                table_size++;
                        rate->width = order_base_2(table_size);
                        rate->lock = lock;
                }
        }

        if (data->muxrate_hw) {
                struct clk_pm_cpu *pmcpu_clk;
                struct clk_hw *muxrate_hw = data->muxrate_hw;
                struct regmap *map;

                pmcpu_clk =  to_clk_pm_cpu(muxrate_hw);
                pmcpu_clk->reg_mux = reg + (u64)pmcpu_clk->reg_mux;
                pmcpu_clk->reg_div = reg + (u64)pmcpu_clk->reg_div;

                mux_hw = muxrate_hw;
                rate_hw = muxrate_hw;
                mux_ops = muxrate_hw->init->ops;
                rate_ops = muxrate_hw->init->ops;

                map = syscon_regmap_lookup_by_compatible(
                                "marvell,armada-3700-nb-pm");
                pmcpu_clk->nb_pm_base = map;
        }

        *hw = clk_hw_register_composite(dev, data->name, data->parent_names,
                                        data->num_parents, mux_hw,
                                        mux_ops, rate_hw, rate_ops,
                                        gate_hw, gate_ops, CLK_IGNORE_UNUSED);

        return PTR_ERR_OR_ZERO(*hw);
}

static int __maybe_unused armada_3700_periph_clock_suspend(struct device *dev)
{
        struct clk_periph_driver_data *data = dev_get_drvdata(dev);

        data->tbg_sel = readl(data->reg + TBG_SEL);
        data->div_sel0 = readl(data->reg + DIV_SEL0);
        data->div_sel1 = readl(data->reg + DIV_SEL1);
        data->div_sel2 = readl(data->reg + DIV_SEL2);
        data->clk_sel = readl(data->reg + CLK_SEL);
        data->clk_dis = readl(data->reg + CLK_DIS);

        return 0;
}

static int __maybe_unused armada_3700_periph_clock_resume(struct device *dev)
{
        struct clk_periph_driver_data *data = dev_get_drvdata(dev);

        /* Follow the same order than what the Cortex-M3 does (ATF code) */
        writel(data->clk_dis, data->reg + CLK_DIS);
        writel(data->div_sel0, data->reg + DIV_SEL0);
        writel(data->div_sel1, data->reg + DIV_SEL1);
        writel(data->div_sel2, data->reg + DIV_SEL2);
        writel(data->tbg_sel, data->reg + TBG_SEL);
        writel(data->clk_sel, data->reg + CLK_SEL);

        return 0;
}

static const struct dev_pm_ops armada_3700_periph_clock_pm_ops = {
        SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(armada_3700_periph_clock_suspend,
                                      armada_3700_periph_clock_resume)
};

static int armada_3700_periph_clock_probe(struct platform_device *pdev)
{
        struct clk_periph_driver_data *driver_data;
        struct device_node *np = pdev->dev.of_node;
        const struct clk_periph_data *data;
        struct device *dev = &pdev->dev;
        int num_periph = 0, i, ret;

        data = of_device_get_match_data(dev);
        if (!data)
                return -ENODEV;

        while (data[num_periph].name)
                num_periph++;

        driver_data = devm_kzalloc(dev, sizeof(*driver_data), GFP_KERNEL);
        if (!driver_data)
                return -ENOMEM;

        driver_data->hw_data = devm_kzalloc(dev,
                                            struct_size(driver_data->hw_data,
                                                        hws, num_periph),
                                            GFP_KERNEL);
        if (!driver_data->hw_data)
                return -ENOMEM;
        driver_data->hw_data->num = num_periph;

        driver_data->reg = devm_platform_ioremap_resource(pdev, 0);
        if (IS_ERR(driver_data->reg))
                return PTR_ERR(driver_data->reg);

        spin_lock_init(&driver_data->lock);

        for (i = 0; i < num_periph; i++) {
                struct clk_hw **hw = &driver_data->hw_data->hws[i];
                if (armada_3700_add_composite_clk(&data[i], driver_data->reg,
                                                  &driver_data->lock, dev, hw))
                        dev_err(dev, "Can't register periph clock %s\n",
                                data[i].name);
        }

        ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get,
                                     driver_data->hw_data);
        if (ret) {
                for (i = 0; i < num_periph; i++)
                        clk_hw_unregister(driver_data->hw_data->hws[i]);
                return ret;
        }

        platform_set_drvdata(pdev, driver_data);
        return 0;
}

static void armada_3700_periph_clock_remove(struct platform_device *pdev)
{
        struct clk_periph_driver_data *data = platform_get_drvdata(pdev);
        struct clk_hw_onecell_data *hw_data = data->hw_data;
        int i;

        of_clk_del_provider(pdev->dev.of_node);

        for (i = 0; i < hw_data->num; i++)
                clk_hw_unregister(hw_data->hws[i]);
}

static struct platform_driver armada_3700_periph_clock_driver = {
        .probe = armada_3700_periph_clock_probe,
        .remove = armada_3700_periph_clock_remove,
        .driver         = {
                .name   = "marvell-armada-3700-periph-clock",
                .of_match_table = armada_3700_periph_clock_of_match,
                .pm     = &armada_3700_periph_clock_pm_ops,
        },
};

builtin_platform_driver(armada_3700_periph_clock_driver);