// SPDX-License-Identifier: GPL-2.0-only
/*
 *  Backlight Driver for Intel-based Apples
 *
 *  Copyright (c) Red Hat <mjg@redhat.com>
 *  Based on code from Pommed:
 *  Copyright (C) 2006 Nicolas Boichat <nicolas @boichat.ch>
 *  Copyright (C) 2006 Felipe Alfaro Solana <felipe_alfaro @linuxmail.org>
 *  Copyright (C) 2007 Julien BLACHE <jb@jblache.org>
 *
 *  This driver triggers SMIs which cause the firmware to change the
 *  backlight brightness. This is icky in many ways, but it's impractical to
 *  get at the firmware code in order to figure out what it's actually doing.
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/backlight.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/pci.h>
#include <linux/acpi.h>
#include <linux/atomic.h>
#include <acpi/video.h>

static struct backlight_device *apple_backlight_device;

struct hw_data {
        /* I/O resource to allocate. */
        unsigned long iostart;
        unsigned long iolen;
        /* Backlight operations structure. */
        const struct backlight_ops backlight_ops;
        void (*set_brightness)(int);
};

static const struct hw_data *hw_data;

/* Module parameters. */
static int debug;
module_param_named(debug, debug, int, 0644);
MODULE_PARM_DESC(debug, "Set to one to enable debugging messages.");

/*
 * Implementation for machines with Intel chipset.
 */
static void intel_chipset_set_brightness(int intensity)
{
        outb(0x04 | (intensity << 4), 0xb3);
        outb(0xbf, 0xb2);
}

static int intel_chipset_send_intensity(struct backlight_device *bd)
{
        int intensity = bd->props.brightness;

        if (debug)
                pr_debug("setting brightness to %d\n", intensity);

        intel_chipset_set_brightness(intensity);
        return 0;
}

static int intel_chipset_get_intensity(struct backlight_device *bd)
{
        int intensity;

        outb(0x03, 0xb3);
        outb(0xbf, 0xb2);
        intensity = inb(0xb3) >> 4;

        if (debug)
                pr_debug("read brightness of %d\n", intensity);

        return intensity;
}

static const struct hw_data intel_chipset_data = {
        .iostart = 0xb2,
        .iolen = 2,
        .backlight_ops  = {
                .options        = BL_CORE_SUSPENDRESUME,
                .get_brightness = intel_chipset_get_intensity,
                .update_status  = intel_chipset_send_intensity,
        },
        .set_brightness = intel_chipset_set_brightness,
};

/*
 * Implementation for machines with Nvidia chipset.
 */
static void nvidia_chipset_set_brightness(int intensity)
{
        outb(0x04 | (intensity << 4), 0x52f);
        outb(0xbf, 0x52e);
}

static int nvidia_chipset_send_intensity(struct backlight_device *bd)
{
        int intensity = bd->props.brightness;

        if (debug)
                pr_debug("setting brightness to %d\n", intensity);

        nvidia_chipset_set_brightness(intensity);
        return 0;
}

static int nvidia_chipset_get_intensity(struct backlight_device *bd)
{
        int intensity;

        outb(0x03, 0x52f);
        outb(0xbf, 0x52e);
        intensity = inb(0x52f) >> 4;

        if (debug)
                pr_debug("read brightness of %d\n", intensity);

        return intensity;
}

static const struct hw_data nvidia_chipset_data = {
        .iostart = 0x52e,
        .iolen = 2,
        .backlight_ops          = {
                .options        = BL_CORE_SUSPENDRESUME,
                .get_brightness = nvidia_chipset_get_intensity,
                .update_status  = nvidia_chipset_send_intensity
        },
        .set_brightness = nvidia_chipset_set_brightness,
};

static int apple_bl_add(struct acpi_device *dev)
{
        struct backlight_properties props;
        struct pci_dev *host;
        int intensity;

        host = pci_get_domain_bus_and_slot(0, 0, 0);

        if (!host) {
                pr_err("unable to find PCI host\n");
                return -ENODEV;
        }

        if (host->vendor == PCI_VENDOR_ID_INTEL)
                hw_data = &intel_chipset_data;
        else if (host->vendor == PCI_VENDOR_ID_NVIDIA)
                hw_data = &nvidia_chipset_data;

        pci_dev_put(host);

        if (!hw_data) {
                pr_err("unknown hardware\n");
                return -ENODEV;
        }

        /* Check that the hardware responds - this may not work under EFI */

        intensity = hw_data->backlight_ops.get_brightness(NULL);

        if (!intensity) {
                hw_data->set_brightness(1);
                if (!hw_data->backlight_ops.get_brightness(NULL))
                        return -ENODEV;

                hw_data->set_brightness(0);
        }

        if (!request_region(hw_data->iostart, hw_data->iolen,
                            "Apple backlight"))
                return -ENXIO;

        memset(&props, 0, sizeof(struct backlight_properties));
        props.type = BACKLIGHT_PLATFORM;
        props.max_brightness = 15;
        apple_backlight_device = backlight_device_register("apple_backlight",
                                  NULL, NULL, &hw_data->backlight_ops, &props);

        if (IS_ERR(apple_backlight_device)) {
                release_region(hw_data->iostart, hw_data->iolen);
                return PTR_ERR(apple_backlight_device);
        }

        apple_backlight_device->props.brightness =
                hw_data->backlight_ops.get_brightness(apple_backlight_device);
        backlight_update_status(apple_backlight_device);

        return 0;
}

static void apple_bl_remove(struct acpi_device *dev)
{
        backlight_device_unregister(apple_backlight_device);

        release_region(hw_data->iostart, hw_data->iolen);
        hw_data = NULL;
}

static const struct acpi_device_id apple_bl_ids[] = {
        {"APP0002", 0},
        {"", 0},
};

static struct acpi_driver apple_bl_driver = {
        .name = "Apple backlight",
        .ids = apple_bl_ids,
        .ops = {
                .add = apple_bl_add,
                .remove = apple_bl_remove,
        },
};

static int __init apple_bl_init(void)
{
        /*
         * Use ACPI video detection code to see if this driver should register
         * or if another driver, e.g. the apple-gmux driver should be used.
         */
        if (acpi_video_get_backlight_type() != acpi_backlight_vendor)
                return -ENODEV;

        return acpi_bus_register_driver(&apple_bl_driver);
}

static void __exit apple_bl_exit(void)
{
        acpi_bus_unregister_driver(&apple_bl_driver);
}

module_init(apple_bl_init);
module_exit(apple_bl_exit);

MODULE_AUTHOR("Matthew Garrett <mjg@redhat.com>");
MODULE_DESCRIPTION("Apple Backlight Driver");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(acpi, apple_bl_ids);
MODULE_ALIAS("mbp_nvidia_bl");