drivers/clk/clk-si5341.c

root/drivers/clk/clk-si5341.c
// SPDX-License-Identifier: GPL-2.0
/*
 * Driver for Silicon Labs Si5340, Si5341, Si5342, Si5344 and Si5345
 * Copyright (C) 2019 Topic Embedded Products
 * Author: Mike Looijmans <mike.looijmans@topic.nl>
 *
 * The Si5341 has 10 outputs and 5 synthesizers.
 * The Si5340 is a smaller version of the Si5341 with only 4 outputs.
 * The Si5345 is similar to the Si5341, with the addition of fractional input
 * dividers and automatic input selection.
 * The Si5342 and Si5344 are smaller versions of the Si5345.
 */

#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/gcd.h>
#include <linux/math64.h>
#include <linux/i2c.h>
#include <linux/module.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/unaligned.h>

#define SI5341_NUM_INPUTS 4

#define SI5340_MAX_NUM_OUTPUTS 4
#define SI5341_MAX_NUM_OUTPUTS 10
#define SI5342_MAX_NUM_OUTPUTS 2
#define SI5344_MAX_NUM_OUTPUTS 4
#define SI5345_MAX_NUM_OUTPUTS 10

#define SI5340_NUM_SYNTH 4
#define SI5341_NUM_SYNTH 5
#define SI5342_NUM_SYNTH 2
#define SI5344_NUM_SYNTH 4
#define SI5345_NUM_SYNTH 5

/* Range of the synthesizer fractional divider */
#define SI5341_SYNTH_N_MIN      10
#define SI5341_SYNTH_N_MAX      4095

/* The chip can get its input clock from 3 input pins or an XTAL */

/* There is one PLL running at 13500–14256 MHz */
#define SI5341_PLL_VCO_MIN 13500000000ull
#define SI5341_PLL_VCO_MAX 14256000000ull

/* The 5 frequency synthesizers obtain their input from the PLL */
struct clk_si5341_synth {
        struct clk_hw hw;
        struct clk_si5341 *data;
        u8 index;
};
#define to_clk_si5341_synth(_hw) \
        container_of(_hw, struct clk_si5341_synth, hw)

/* The output stages can be connected to any synth (full mux) */
struct clk_si5341_output {
        struct clk_hw hw;
        struct clk_si5341 *data;
        struct regulator *vddo_reg;
        u8 index;
};
#define to_clk_si5341_output(_hw) \
        container_of(_hw, struct clk_si5341_output, hw)

struct clk_si5341 {
        struct clk_hw hw;
        struct regmap *regmap;
        struct i2c_client *i2c_client;
        struct clk_si5341_synth synth[SI5341_NUM_SYNTH];
        struct clk_si5341_output clk[SI5341_MAX_NUM_OUTPUTS];
        struct clk *input_clk[SI5341_NUM_INPUTS];
        const char *input_clk_name[SI5341_NUM_INPUTS];
        const u16 *reg_output_offset;
        const u16 *reg_rdiv_offset;
        u64 freq_vco; /* 13500–14256 MHz */
        u8 num_outputs;
        u8 num_synth;
        u16 chip_id;
        bool xaxb_ext_clk;
        bool iovdd_33;
};
#define to_clk_si5341(_hw)      container_of(_hw, struct clk_si5341, hw)

struct clk_si5341_output_config {
        u8 out_format_drv_bits;
        u8 out_cm_ampl_bits;
        u8 vdd_sel_bits;
        bool synth_master;
        bool always_on;
};

#define SI5341_PAGE             0x0001
#define SI5341_PN_BASE          0x0002
#define SI5341_DEVICE_REV       0x0005
#define SI5341_STATUS           0x000C
#define SI5341_LOS              0x000D
#define SI5341_STATUS_STICKY    0x0011
#define SI5341_LOS_STICKY       0x0012
#define SI5341_SOFT_RST         0x001C
#define SI5341_IN_SEL           0x0021
#define SI5341_DEVICE_READY     0x00FE
#define SI5341_XAXB_CFG         0x090E
#define SI5341_IO_VDD_SEL       0x0943
#define SI5341_IN_EN            0x0949
#define SI5341_INX_TO_PFD_EN    0x094A

/* Status bits */
#define SI5341_STATUS_SYSINCAL  BIT(0)
#define SI5341_STATUS_LOSXAXB   BIT(1)
#define SI5341_STATUS_LOSREF    BIT(2)
#define SI5341_STATUS_LOL       BIT(3)

/* Input selection */
#define SI5341_IN_SEL_MASK      0x06
#define SI5341_IN_SEL_SHIFT     1
#define SI5341_IN_SEL_REGCTRL   0x01
#define SI5341_INX_TO_PFD_SHIFT 4

/* XTAL config bits */
#define SI5341_XAXB_CFG_EXTCLK_EN       BIT(0)
#define SI5341_XAXB_CFG_PDNB            BIT(1)

/* Input dividers (48-bit) */
#define SI5341_IN_PDIV(x)       (0x0208 + ((x) * 10))
#define SI5341_IN_PSET(x)       (0x020E + ((x) * 10))
#define SI5341_PX_UPD           0x0230

/* PLL configuration */
#define SI5341_PLL_M_NUM        0x0235
#define SI5341_PLL_M_DEN        0x023B

/* Output configuration */
#define SI5341_OUT_CONFIG(output)       \
                        ((output)->data->reg_output_offset[(output)->index])
#define SI5341_OUT_FORMAT(output)       (SI5341_OUT_CONFIG(output) + 1)
#define SI5341_OUT_CM(output)           (SI5341_OUT_CONFIG(output) + 2)
#define SI5341_OUT_MUX_SEL(output)      (SI5341_OUT_CONFIG(output) + 3)
#define SI5341_OUT_R_REG(output)        \
                        ((output)->data->reg_rdiv_offset[(output)->index])

#define SI5341_OUT_MUX_VDD_SEL_MASK 0x38

/* Synthesize N divider */
#define SI5341_SYNTH_N_NUM(x)   (0x0302 + ((x) * 11))
#define SI5341_SYNTH_N_DEN(x)   (0x0308 + ((x) * 11))
#define SI5341_SYNTH_N_UPD(x)   (0x030C + ((x) * 11))

/* Synthesizer output enable, phase bypass, power mode */
#define SI5341_SYNTH_N_CLK_TO_OUTX_EN   0x0A03
#define SI5341_SYNTH_N_PIBYP            0x0A04
#define SI5341_SYNTH_N_PDNB             0x0A05
#define SI5341_SYNTH_N_CLK_DIS          0x0B4A

#define SI5341_REGISTER_MAX     0xBFF

/* SI5341_OUT_CONFIG bits */
#define SI5341_OUT_CFG_PDN              BIT(0)
#define SI5341_OUT_CFG_OE               BIT(1)
#define SI5341_OUT_CFG_RDIV_FORCE2      BIT(2)

/* Static configuration (to be moved to firmware) */
struct si5341_reg_default {
        u16 address;
        u8 value;
};

static const char * const si5341_input_clock_names[] = {
        "in0", "in1", "in2", "xtal"
};

/* Output configuration registers 0..9 are not quite logically organized */
/* Also for si5345 */
static const u16 si5341_reg_output_offset[] = {
        0x0108,
        0x010D,
        0x0112,
        0x0117,
        0x011C,
        0x0121,
        0x0126,
        0x012B,
        0x0130,
        0x013A,
};

/* for si5340, si5342 and si5344 */
static const u16 si5340_reg_output_offset[] = {
        0x0112,
        0x0117,
        0x0126,
        0x012B,
};

/* The location of the R divider registers */
static const u16 si5341_reg_rdiv_offset[] = {
        0x024A,
        0x024D,
        0x0250,
        0x0253,
        0x0256,
        0x0259,
        0x025C,
        0x025F,
        0x0262,
        0x0268,
};
static const u16 si5340_reg_rdiv_offset[] = {
        0x0250,
        0x0253,
        0x025C,
        0x025F,
};

/*
 * Programming sequence from ClockBuilder, settings to initialize the system
 * using only the XTAL input, without pre-divider.
 * This also contains settings that aren't mentioned anywhere in the datasheet.
 * The "known" settings like synth and output configuration are done later.
 */
static const struct si5341_reg_default si5341_reg_defaults[] = {
        { 0x0017, 0x3A }, /* INT mask (disable interrupts) */
        { 0x0018, 0xFF }, /* INT mask */
        { 0x0021, 0x0F }, /* Select XTAL as input */
        { 0x0022, 0x00 }, /* Not in datasheet */
        { 0x002B, 0x02 }, /* SPI config */
        { 0x002C, 0x20 }, /* LOS enable for XTAL */
        { 0x002D, 0x00 }, /* LOS timing */
        { 0x002E, 0x00 },
        { 0x002F, 0x00 },
        { 0x0030, 0x00 },
        { 0x0031, 0x00 },
        { 0x0032, 0x00 },
        { 0x0033, 0x00 },
        { 0x0034, 0x00 },
        { 0x0035, 0x00 },
        { 0x0036, 0x00 },
        { 0x0037, 0x00 },
        { 0x0038, 0x00 }, /* LOS setting (thresholds) */
        { 0x0039, 0x00 },
        { 0x003A, 0x00 },
        { 0x003B, 0x00 },
        { 0x003C, 0x00 },
        { 0x003D, 0x00 }, /* LOS setting (thresholds) end */
        { 0x0041, 0x00 }, /* LOS0_DIV_SEL */
        { 0x0042, 0x00 }, /* LOS1_DIV_SEL */
        { 0x0043, 0x00 }, /* LOS2_DIV_SEL */
        { 0x0044, 0x00 }, /* LOS3_DIV_SEL */
        { 0x009E, 0x00 }, /* Not in datasheet */
        { 0x0102, 0x01 }, /* Enable outputs */
        { 0x013F, 0x00 }, /* Not in datasheet */
        { 0x0140, 0x00 }, /* Not in datasheet */
        { 0x0141, 0x40 }, /* OUT LOS */
        { 0x0202, 0x00 }, /* XAXB_FREQ_OFFSET (=0)*/
        { 0x0203, 0x00 },
        { 0x0204, 0x00 },
        { 0x0205, 0x00 },
        { 0x0206, 0x00 }, /* PXAXB (2^x) */
        { 0x0208, 0x00 }, /* Px divider setting (usually 0) */
        { 0x0209, 0x00 },
        { 0x020A, 0x00 },
        { 0x020B, 0x00 },
        { 0x020C, 0x00 },
        { 0x020D, 0x00 },
        { 0x020E, 0x00 },
        { 0x020F, 0x00 },
        { 0x0210, 0x00 },
        { 0x0211, 0x00 },
        { 0x0212, 0x00 },
        { 0x0213, 0x00 },
        { 0x0214, 0x00 },
        { 0x0215, 0x00 },
        { 0x0216, 0x00 },
        { 0x0217, 0x00 },
        { 0x0218, 0x00 },
        { 0x0219, 0x00 },
        { 0x021A, 0x00 },
        { 0x021B, 0x00 },
        { 0x021C, 0x00 },
        { 0x021D, 0x00 },
        { 0x021E, 0x00 },
        { 0x021F, 0x00 },
        { 0x0220, 0x00 },
        { 0x0221, 0x00 },
        { 0x0222, 0x00 },
        { 0x0223, 0x00 },
        { 0x0224, 0x00 },
        { 0x0225, 0x00 },
        { 0x0226, 0x00 },
        { 0x0227, 0x00 },
        { 0x0228, 0x00 },
        { 0x0229, 0x00 },
        { 0x022A, 0x00 },
        { 0x022B, 0x00 },
        { 0x022C, 0x00 },
        { 0x022D, 0x00 },
        { 0x022E, 0x00 },
        { 0x022F, 0x00 }, /* Px divider setting (usually 0) end */
        { 0x026B, 0x00 }, /* DESIGN_ID (ASCII string) */
        { 0x026C, 0x00 },
        { 0x026D, 0x00 },
        { 0x026E, 0x00 },
        { 0x026F, 0x00 },
        { 0x0270, 0x00 },
        { 0x0271, 0x00 },
        { 0x0272, 0x00 }, /* DESIGN_ID (ASCII string) end */
        { 0x0339, 0x1F }, /* N_FSTEP_MSK */
        { 0x033B, 0x00 }, /* Nx_FSTEPW (Frequency step) */
        { 0x033C, 0x00 },
        { 0x033D, 0x00 },
        { 0x033E, 0x00 },
        { 0x033F, 0x00 },
        { 0x0340, 0x00 },
        { 0x0341, 0x00 },
        { 0x0342, 0x00 },
        { 0x0343, 0x00 },
        { 0x0344, 0x00 },
        { 0x0345, 0x00 },
        { 0x0346, 0x00 },
        { 0x0347, 0x00 },
        { 0x0348, 0x00 },
        { 0x0349, 0x00 },
        { 0x034A, 0x00 },
        { 0x034B, 0x00 },
        { 0x034C, 0x00 },
        { 0x034D, 0x00 },
        { 0x034E, 0x00 },
        { 0x034F, 0x00 },
        { 0x0350, 0x00 },
        { 0x0351, 0x00 },
        { 0x0352, 0x00 },
        { 0x0353, 0x00 },
        { 0x0354, 0x00 },
        { 0x0355, 0x00 },
        { 0x0356, 0x00 },
        { 0x0357, 0x00 },
        { 0x0358, 0x00 }, /* Nx_FSTEPW (Frequency step) end */
        { 0x0359, 0x00 }, /* Nx_DELAY */
        { 0x035A, 0x00 },
        { 0x035B, 0x00 },
        { 0x035C, 0x00 },
        { 0x035D, 0x00 },
        { 0x035E, 0x00 },
        { 0x035F, 0x00 },
        { 0x0360, 0x00 },
        { 0x0361, 0x00 },
        { 0x0362, 0x00 }, /* Nx_DELAY end */
        { 0x0802, 0x00 }, /* Not in datasheet */
        { 0x0803, 0x00 }, /* Not in datasheet */
        { 0x0804, 0x00 }, /* Not in datasheet */
        { 0x090E, 0x02 }, /* XAXB_EXTCLK_EN=0 XAXB_PDNB=1 (use XTAL) */
        { 0x091C, 0x04 }, /* ZDM_EN=4 (Normal mode) */
        { 0x0949, 0x00 }, /* IN_EN (disable input clocks) */
        { 0x094A, 0x00 }, /* INx_TO_PFD_EN (disabled) */
        { 0x0A02, 0x00 }, /* Not in datasheet */
        { 0x0B44, 0x0F }, /* PDIV_ENB (datasheet does not mention what it is) */
        { 0x0B57, 0x10 }, /* VCO_RESET_CALCODE (not described in datasheet) */
        { 0x0B58, 0x05 }, /* VCO_RESET_CALCODE (not described in datasheet) */
};

/* Read and interpret a 44-bit followed by a 32-bit value in the regmap */
static int si5341_decode_44_32(struct regmap *regmap, unsigned int reg,
        u64 *val1, u32 *val2)
{
        int err;
        u8 r[10];

        err = regmap_bulk_read(regmap, reg, r, 10);
        if (err < 0)
                return err;

        *val1 = ((u64)((r[5] & 0x0f) << 8 | r[4]) << 32) |
                 (get_unaligned_le32(r));
        *val2 = get_unaligned_le32(&r[6]);

        return 0;
}

static int si5341_encode_44_32(struct regmap *regmap, unsigned int reg,
        u64 n_num, u32 n_den)
{
        u8 r[10];

        /* Shift left as far as possible without overflowing */
        while (!(n_num & BIT_ULL(43)) && !(n_den & BIT(31))) {
                n_num <<= 1;
                n_den <<= 1;
        }

        /* 44 bits (6 bytes) numerator */
        put_unaligned_le32(n_num, r);
        r[4] = (n_num >> 32) & 0xff;
        r[5] = (n_num >> 40) & 0x0f;
        /* 32 bits denominator */
        put_unaligned_le32(n_den, &r[6]);

        /* Program the fraction */
        return regmap_bulk_write(regmap, reg, r, sizeof(r));
}

/* VCO, we assume it runs at a constant frequency */
static unsigned long si5341_clk_recalc_rate(struct clk_hw *hw,
                unsigned long parent_rate)
{
        struct clk_si5341 *data = to_clk_si5341(hw);
        int err;
        u64 res;
        u64 m_num;
        u32 m_den;
        unsigned int shift;

        /* Assume that PDIV is not being used, just read the PLL setting */
        err = si5341_decode_44_32(data->regmap, SI5341_PLL_M_NUM,
                                &m_num, &m_den);
        if (err < 0)
                return 0;

        if (!m_num || !m_den)
                return 0;

        /*
         * Though m_num is 64-bit, only the upper bits are actually used. While
         * calculating m_num and m_den, they are shifted as far as possible to
         * the left. To avoid 96-bit division here, we just shift them back so
         * we can do with just 64 bits.
         */
        shift = 0;
        res = m_num;
        while (res & 0xffff00000000ULL) {
                ++shift;
                res >>= 1;
        }
        res *= parent_rate;
        do_div(res, (m_den >> shift));

        /* We cannot return the actual frequency in 32 bit, store it locally */
        data->freq_vco = res;

        /* Report kHz since the value is out of range */
        do_div(res, 1000);

        return (unsigned long)res;
}

static int si5341_clk_get_selected_input(struct clk_si5341 *data)
{
        int err;
        u32 val;

        err = regmap_read(data->regmap, SI5341_IN_SEL, &val);
        if (err < 0)
                return err;

        return (val & SI5341_IN_SEL_MASK) >> SI5341_IN_SEL_SHIFT;
}

static u8 si5341_clk_get_parent(struct clk_hw *hw)
{
        struct clk_si5341 *data = to_clk_si5341(hw);
        int res = si5341_clk_get_selected_input(data);

        if (res < 0)
                return 0; /* Apparently we cannot report errors */

        return res;
}

static int si5341_clk_reparent(struct clk_si5341 *data, u8 index)
{
        int err;
        u8 val;

        val = (index << SI5341_IN_SEL_SHIFT) & SI5341_IN_SEL_MASK;
        /* Enable register-based input selection */
        val |= SI5341_IN_SEL_REGCTRL;

        err = regmap_update_bits(data->regmap,
                SI5341_IN_SEL, SI5341_IN_SEL_REGCTRL | SI5341_IN_SEL_MASK, val);
        if (err < 0)
                return err;

        if (index < 3) {
                /* Enable input buffer for selected input */
                err = regmap_update_bits(data->regmap,
                                SI5341_IN_EN, 0x07, BIT(index));
                if (err < 0)
                        return err;

                /* Enables the input to phase detector */
                err = regmap_update_bits(data->regmap, SI5341_INX_TO_PFD_EN,
                                0x7 << SI5341_INX_TO_PFD_SHIFT,
                                BIT(index + SI5341_INX_TO_PFD_SHIFT));
                if (err < 0)
                        return err;

                /* Power down XTAL oscillator and buffer */
                err = regmap_update_bits(data->regmap, SI5341_XAXB_CFG,
                                SI5341_XAXB_CFG_PDNB, 0);
                if (err < 0)
                        return err;

                /*
                 * Set the P divider to "1". There's no explanation in the
                 * datasheet of these registers, but the clockbuilder software
                 * programs a "1" when the input is being used.
                 */
                err = regmap_write(data->regmap, SI5341_IN_PDIV(index), 1);
                if (err < 0)
                        return err;

                err = regmap_write(data->regmap, SI5341_IN_PSET(index), 1);
                if (err < 0)
                        return err;

                /* Set update PDIV bit */
                err = regmap_write(data->regmap, SI5341_PX_UPD, BIT(index));
                if (err < 0)
                        return err;
        } else {
                /* Disable all input buffers */
                err = regmap_update_bits(data->regmap, SI5341_IN_EN, 0x07, 0);
                if (err < 0)
                        return err;

                /* Disable input to phase detector */
                err = regmap_update_bits(data->regmap, SI5341_INX_TO_PFD_EN,
                                0x7 << SI5341_INX_TO_PFD_SHIFT, 0);
                if (err < 0)
                        return err;

                /* Power up XTAL oscillator and buffer, select clock mode */
                err = regmap_update_bits(data->regmap, SI5341_XAXB_CFG,
                                SI5341_XAXB_CFG_PDNB | SI5341_XAXB_CFG_EXTCLK_EN,
                                SI5341_XAXB_CFG_PDNB | (data->xaxb_ext_clk ?
                                        SI5341_XAXB_CFG_EXTCLK_EN : 0));
                if (err < 0)
                        return err;
        }

        return 0;
}

static int si5341_clk_set_parent(struct clk_hw *hw, u8 index)
{
        struct clk_si5341 *data = to_clk_si5341(hw);

        return si5341_clk_reparent(data, index);
}

static const struct clk_ops si5341_clk_ops = {
        .determine_rate = clk_hw_determine_rate_no_reparent,
        .set_parent = si5341_clk_set_parent,
        .get_parent = si5341_clk_get_parent,
        .recalc_rate = si5341_clk_recalc_rate,
};

/* Synthesizers, there are 5 synthesizers that connect to any of the outputs */

/* The synthesizer is on if all power and enable bits are set */
static int si5341_synth_clk_is_on(struct clk_hw *hw)
{
        struct clk_si5341_synth *synth = to_clk_si5341_synth(hw);
        int err;
        u32 val;
        u8 index = synth->index;

        err = regmap_read(synth->data->regmap,
                        SI5341_SYNTH_N_CLK_TO_OUTX_EN, &val);
        if (err < 0)
                return 0;

        if (!(val & BIT(index)))
                return 0;

        err = regmap_read(synth->data->regmap, SI5341_SYNTH_N_PDNB, &val);
        if (err < 0)
                return 0;

        if (!(val & BIT(index)))
                return 0;

        /* This bit must be 0 for the synthesizer to receive clock input */
        err = regmap_read(synth->data->regmap, SI5341_SYNTH_N_CLK_DIS, &val);
        if (err < 0)
                return 0;

        return !(val & BIT(index));
}

static void si5341_synth_clk_unprepare(struct clk_hw *hw)
{
        struct clk_si5341_synth *synth = to_clk_si5341_synth(hw);
        u8 index = synth->index; /* In range 0..5 */
        u8 mask = BIT(index);

        /* Disable output */
        regmap_update_bits(synth->data->regmap,
                SI5341_SYNTH_N_CLK_TO_OUTX_EN, mask, 0);
        /* Power down */
        regmap_update_bits(synth->data->regmap,
                SI5341_SYNTH_N_PDNB, mask, 0);
        /* Disable clock input to synth (set to 1 to disable) */
        regmap_update_bits(synth->data->regmap,
                SI5341_SYNTH_N_CLK_DIS, mask, mask);
}

static int si5341_synth_clk_prepare(struct clk_hw *hw)
{
        struct clk_si5341_synth *synth = to_clk_si5341_synth(hw);
        int err;
        u8 index = synth->index;
        u8 mask = BIT(index);

        /* Power up */
        err = regmap_update_bits(synth->data->regmap,
                SI5341_SYNTH_N_PDNB, mask, mask);
        if (err < 0)
                return err;

        /* Enable clock input to synth (set bit to 0 to enable) */
        err = regmap_update_bits(synth->data->regmap,
                SI5341_SYNTH_N_CLK_DIS, mask, 0);
        if (err < 0)
                return err;

        /* Enable output */
        return regmap_update_bits(synth->data->regmap,
                SI5341_SYNTH_N_CLK_TO_OUTX_EN, mask, mask);
}

/* Synth clock frequency: Fvco * n_den / n_den, with Fvco in 13500-14256 MHz */
static unsigned long si5341_synth_clk_recalc_rate(struct clk_hw *hw,
                unsigned long parent_rate)
{
        struct clk_si5341_synth *synth = to_clk_si5341_synth(hw);
        u64 f;
        u64 n_num;
        u32 n_den;
        int err;

        err = si5341_decode_44_32(synth->data->regmap,
                        SI5341_SYNTH_N_NUM(synth->index), &n_num, &n_den);
        if (err < 0)
                return err;
        /* Check for bogus/uninitialized settings */
        if (!n_num || !n_den)
                return 0;

        /*
         * n_num and n_den are shifted left as much as possible, so to prevent
         * overflow in 64-bit math, we shift n_den 4 bits to the right
         */
        f = synth->data->freq_vco;
        f *= n_den >> 4;

        /* Now we need to do 64-bit division: f/n_num */
        /* And compensate for the 4 bits we dropped */
        f = div64_u64(f, (n_num >> 4));

        return f;
}

static int si5341_synth_clk_determine_rate(struct clk_hw *hw,
                                           struct clk_rate_request *req)
{
        struct clk_si5341_synth *synth = to_clk_si5341_synth(hw);
        u64 f;

        /* The synthesizer accuracy is such that anything in range will work */
        f = synth->data->freq_vco;
        do_div(f, SI5341_SYNTH_N_MAX);
        if (req->rate < f) {
                req->rate = f;

                return 0;
        }

        f = synth->data->freq_vco;
        do_div(f, SI5341_SYNTH_N_MIN);
        if (req->rate > f) {
                req->rate = f;

                return 0;
        }

        return 0;
}

static int si5341_synth_program(struct clk_si5341_synth *synth,
        u64 n_num, u32 n_den, bool is_integer)
{
        int err;
        u8 index = synth->index;

        err = si5341_encode_44_32(synth->data->regmap,
                        SI5341_SYNTH_N_NUM(index), n_num, n_den);

        err = regmap_update_bits(synth->data->regmap,
                SI5341_SYNTH_N_PIBYP, BIT(index), is_integer ? BIT(index) : 0);
        if (err < 0)
                return err;

        return regmap_write(synth->data->regmap,
                SI5341_SYNTH_N_UPD(index), 0x01);
}


static int si5341_synth_clk_set_rate(struct clk_hw *hw, unsigned long rate,
                unsigned long parent_rate)
{
        struct clk_si5341_synth *synth = to_clk_si5341_synth(hw);
        u64 n_num;
        u32 n_den;
        u32 r;
        u32 g;
        bool is_integer;

        n_num = synth->data->freq_vco;

        /* see if there's an integer solution */
        r = do_div(n_num, rate);
        is_integer = (r == 0);
        if (is_integer) {
                /* Integer divider equal to n_num */
                n_den = 1;
        } else {
                /* Calculate a fractional solution */
                g = gcd(r, rate);
                n_den = rate / g;
                n_num *= n_den;
                n_num += r / g;
        }

        dev_dbg(&synth->data->i2c_client->dev,
                        "%s(%u): n=0x%llx d=0x%x %s\n", __func__,
                                synth->index, n_num, n_den,
                                is_integer ? "int" : "frac");

        return si5341_synth_program(synth, n_num, n_den, is_integer);
}

static const struct clk_ops si5341_synth_clk_ops = {
        .is_prepared = si5341_synth_clk_is_on,
        .prepare = si5341_synth_clk_prepare,
        .unprepare = si5341_synth_clk_unprepare,
        .recalc_rate = si5341_synth_clk_recalc_rate,
        .determine_rate = si5341_synth_clk_determine_rate,
        .set_rate = si5341_synth_clk_set_rate,
};

static int si5341_output_clk_is_on(struct clk_hw *hw)
{
        struct clk_si5341_output *output = to_clk_si5341_output(hw);
        int err;
        u32 val;

        err = regmap_read(output->data->regmap,
                        SI5341_OUT_CONFIG(output), &val);
        if (err < 0)
                return err;

        /* Bit 0=PDN, 1=OE so only a value of 0x2 enables the output */
        return (val & 0x03) == SI5341_OUT_CFG_OE;
}

/* Disables and then powers down the output */
static void si5341_output_clk_unprepare(struct clk_hw *hw)
{
        struct clk_si5341_output *output = to_clk_si5341_output(hw);

        regmap_update_bits(output->data->regmap,
                        SI5341_OUT_CONFIG(output),
                        SI5341_OUT_CFG_OE, 0);
        regmap_update_bits(output->data->regmap,
                        SI5341_OUT_CONFIG(output),
                        SI5341_OUT_CFG_PDN, SI5341_OUT_CFG_PDN);
}

/* Powers up and then enables the output */
static int si5341_output_clk_prepare(struct clk_hw *hw)
{
        struct clk_si5341_output *output = to_clk_si5341_output(hw);
        int err;

        err = regmap_update_bits(output->data->regmap,
                        SI5341_OUT_CONFIG(output),
                        SI5341_OUT_CFG_PDN, 0);
        if (err < 0)
                return err;

        return regmap_update_bits(output->data->regmap,
                        SI5341_OUT_CONFIG(output),
                        SI5341_OUT_CFG_OE, SI5341_OUT_CFG_OE);
}

static unsigned long si5341_output_clk_recalc_rate(struct clk_hw *hw,
                unsigned long parent_rate)
{
        struct clk_si5341_output *output = to_clk_si5341_output(hw);
        int err;
        u32 val;
        u32 r_divider;
        u8 r[3];

        err = regmap_read(output->data->regmap,
                        SI5341_OUT_CONFIG(output), &val);
        if (err < 0)
                return err;

        /* If SI5341_OUT_CFG_RDIV_FORCE2 is set, r_divider is 2 */
        if (val & SI5341_OUT_CFG_RDIV_FORCE2)
                return parent_rate / 2;

        err = regmap_bulk_read(output->data->regmap,
                        SI5341_OUT_R_REG(output), r, 3);
        if (err < 0)
                return err;

        /* Calculate value as 24-bit integer*/
        r_divider = r[2] << 16 | r[1] << 8 | r[0];

        /* If Rx_REG is zero, the divider is disabled, so return a "0" rate */
        if (!r_divider)
                return 0;

        /* Divider is 2*(Rx_REG+1) */
        r_divider += 1;
        r_divider <<= 1;


        return parent_rate / r_divider;
}

static int si5341_output_clk_determine_rate(struct clk_hw *hw,
                                            struct clk_rate_request *req)
{
        unsigned long rate = req->rate;
        unsigned long r;

        if (!rate)
                return 0;

        r = req->best_parent_rate >> 1;

        /* If rate is an even divisor, no changes to parent required */
        if (r && !(r % rate))
                return 0;

        if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) {
                if (rate > 200000000) {
                        /* minimum r-divider is 2 */
                        r = 2;
                } else {
                        /* Take a parent frequency near 400 MHz */
                        r = (400000000u / rate) & ~1;
                }
                req->best_parent_rate = r * rate;
        } else {
                /* We cannot change our parent's rate, report what we can do */
                r /= rate;
                rate = req->best_parent_rate / (r << 1);
        }

        req->rate = rate;
        return 0;
}

static int si5341_output_clk_set_rate(struct clk_hw *hw, unsigned long rate,
                unsigned long parent_rate)
{
        struct clk_si5341_output *output = to_clk_si5341_output(hw);
        u32 r_div;
        int err;
        u8 r[3];

        if (!rate)
                return -EINVAL;

        /* Frequency divider is (r_div + 1) * 2 */
        r_div = (parent_rate / rate) >> 1;

        if (r_div <= 1)
                r_div = 0;
        else if (r_div >= BIT(24))
                r_div = BIT(24) - 1;
        else
                --r_div;

        /* For a value of "2", we set the "OUT0_RDIV_FORCE2" bit */
        err = regmap_update_bits(output->data->regmap,
                        SI5341_OUT_CONFIG(output),
                        SI5341_OUT_CFG_RDIV_FORCE2,
                        (r_div == 0) ? SI5341_OUT_CFG_RDIV_FORCE2 : 0);
        if (err < 0)
                return err;

        /* Always write Rx_REG, because a zero value disables the divider */
        r[0] = r_div ? (r_div & 0xff) : 1;
        r[1] = (r_div >> 8) & 0xff;
        r[2] = (r_div >> 16) & 0xff;
        return regmap_bulk_write(output->data->regmap,
                        SI5341_OUT_R_REG(output), r, 3);
}

static int si5341_output_reparent(struct clk_si5341_output *output, u8 index)
{
        return regmap_update_bits(output->data->regmap,
                SI5341_OUT_MUX_SEL(output), 0x07, index);
}

static int si5341_output_set_parent(struct clk_hw *hw, u8 index)
{
        struct clk_si5341_output *output = to_clk_si5341_output(hw);

        if (index >= output->data->num_synth)
                return -EINVAL;

        return si5341_output_reparent(output, index);
}

static u8 si5341_output_get_parent(struct clk_hw *hw)
{
        struct clk_si5341_output *output = to_clk_si5341_output(hw);
        u32 val;

        regmap_read(output->data->regmap, SI5341_OUT_MUX_SEL(output), &val);

        return val & 0x7;
}

static const struct clk_ops si5341_output_clk_ops = {
        .is_prepared = si5341_output_clk_is_on,
        .prepare = si5341_output_clk_prepare,
        .unprepare = si5341_output_clk_unprepare,
        .recalc_rate = si5341_output_clk_recalc_rate,
        .determine_rate = si5341_output_clk_determine_rate,
        .set_rate = si5341_output_clk_set_rate,
        .set_parent = si5341_output_set_parent,
        .get_parent = si5341_output_get_parent,
};

/*
 * The chip can be bought in a pre-programmed version, or one can program the
 * NVM in the chip to boot up in a preset mode. This routine tries to determine
 * if that's the case, or if we need to reset and program everything from
 * scratch. Returns negative error, or true/false.
 */
static int si5341_is_programmed_already(struct clk_si5341 *data)
{
        int err;
        u8 r[4];

        /* Read the PLL divider value, it must have a non-zero value */
        err = regmap_bulk_read(data->regmap, SI5341_PLL_M_DEN,
                        r, ARRAY_SIZE(r));
        if (err < 0)
                return err;

        return !!get_unaligned_le32(r);
}

static struct clk_hw *
of_clk_si5341_get(struct of_phandle_args *clkspec, void *_data)
{
        struct clk_si5341 *data = _data;
        unsigned int idx = clkspec->args[1];
        unsigned int group = clkspec->args[0];

        switch (group) {
        case 0:
                if (idx >= data->num_outputs) {
                        dev_err(&data->i2c_client->dev,
                                "invalid output index %u\n", idx);
                        return ERR_PTR(-EINVAL);
                }
                return &data->clk[idx].hw;
        case 1:
                if (idx >= data->num_synth) {
                        dev_err(&data->i2c_client->dev,
                                "invalid synthesizer index %u\n", idx);
                        return ERR_PTR(-EINVAL);
                }
                return &data->synth[idx].hw;
        case 2:
                if (idx > 0) {
                        dev_err(&data->i2c_client->dev,
                                "invalid PLL index %u\n", idx);
                        return ERR_PTR(-EINVAL);
                }
                return &data->hw;
        default:
                dev_err(&data->i2c_client->dev, "invalid group %u\n", group);
                return ERR_PTR(-EINVAL);
        }
}

static int si5341_probe_chip_id(struct clk_si5341 *data)
{
        int err;
        u8 reg[4];
        u16 model;

        err = regmap_bulk_read(data->regmap, SI5341_PN_BASE, reg,
                                ARRAY_SIZE(reg));
        if (err < 0) {
                dev_err(&data->i2c_client->dev, "Failed to read chip ID\n");
                return err;
        }

        model = get_unaligned_le16(reg);

        dev_info(&data->i2c_client->dev, "Chip: %x Grade: %u Rev: %u\n",
                 model, reg[2], reg[3]);

        switch (model) {
        case 0x5340:
                data->num_outputs = SI5340_MAX_NUM_OUTPUTS;
                data->num_synth = SI5340_NUM_SYNTH;
                data->reg_output_offset = si5340_reg_output_offset;
                data->reg_rdiv_offset = si5340_reg_rdiv_offset;
                break;
        case 0x5341:
                data->num_outputs = SI5341_MAX_NUM_OUTPUTS;
                data->num_synth = SI5341_NUM_SYNTH;
                data->reg_output_offset = si5341_reg_output_offset;
                data->reg_rdiv_offset = si5341_reg_rdiv_offset;
                break;
        case 0x5342:
                data->num_outputs = SI5342_MAX_NUM_OUTPUTS;
                data->num_synth = SI5342_NUM_SYNTH;
                data->reg_output_offset = si5340_reg_output_offset;
                data->reg_rdiv_offset = si5340_reg_rdiv_offset;
                break;
        case 0x5344:
                data->num_outputs = SI5344_MAX_NUM_OUTPUTS;
                data->num_synth = SI5344_NUM_SYNTH;
                data->reg_output_offset = si5340_reg_output_offset;
                data->reg_rdiv_offset = si5340_reg_rdiv_offset;
                break;
        case 0x5345:
                data->num_outputs = SI5345_MAX_NUM_OUTPUTS;
                data->num_synth = SI5345_NUM_SYNTH;
                data->reg_output_offset = si5341_reg_output_offset;
                data->reg_rdiv_offset = si5341_reg_rdiv_offset;
                break;
        default:
                dev_err(&data->i2c_client->dev, "Model '%x' not supported\n",
                        model);
                return -EINVAL;
        }

        data->chip_id = model;

        return 0;
}

/* Read active settings into the regmap cache for later reference */
static int si5341_read_settings(struct clk_si5341 *data)
{
        int err;
        u8 i;
        u8 r[10];

        err = regmap_bulk_read(data->regmap, SI5341_PLL_M_NUM, r, 10);
        if (err < 0)
                return err;

        err = regmap_bulk_read(data->regmap,
                                SI5341_SYNTH_N_CLK_TO_OUTX_EN, r, 3);
        if (err < 0)
                return err;

        err = regmap_bulk_read(data->regmap,
                                SI5341_SYNTH_N_CLK_DIS, r, 1);
        if (err < 0)
                return err;

        for (i = 0; i < data->num_synth; ++i) {
                err = regmap_bulk_read(data->regmap,
                                        SI5341_SYNTH_N_NUM(i), r, 10);
                if (err < 0)
                        return err;
        }

        for (i = 0; i < data->num_outputs; ++i) {
                err = regmap_bulk_read(data->regmap,
                                        data->reg_output_offset[i], r, 4);
                if (err < 0)
                        return err;

                err = regmap_bulk_read(data->regmap,
                                        data->reg_rdiv_offset[i], r, 3);
                if (err < 0)
                        return err;
        }

        return 0;
}

static int si5341_write_multiple(struct clk_si5341 *data,
        const struct si5341_reg_default *values, unsigned int num_values)
{
        unsigned int i;
        int res;

        for (i = 0; i < num_values; ++i) {
                res = regmap_write(data->regmap,
                        values[i].address, values[i].value);
                if (res < 0) {
                        dev_err(&data->i2c_client->dev,
                                "Failed to write %#x:%#x\n",
                                values[i].address, values[i].value);
                        return res;
                }
        }

        return 0;
}

static const struct si5341_reg_default si5341_preamble[] = {
        { 0x0B25, 0x00 },
        { 0x0502, 0x01 },
        { 0x0505, 0x03 },
        { 0x0957, 0x17 },
        { 0x0B4E, 0x1A },
};

static const struct si5341_reg_default si5345_preamble[] = {
        { 0x0B25, 0x00 },
        { 0x0540, 0x01 },
};

static int si5341_send_preamble(struct clk_si5341 *data)
{
        int res;
        u32 revision;

        /* For revision 2 and up, the values are slightly different */
        res = regmap_read(data->regmap, SI5341_DEVICE_REV, &revision);
        if (res < 0)
                return res;

        /* Write "preamble" as specified by datasheet */
        res = regmap_write(data->regmap, 0xB24, revision < 2 ? 0xD8 : 0xC0);
        if (res < 0)
                return res;

        /* The si5342..si5345 require a different preamble */
        if (data->chip_id > 0x5341)
                res = si5341_write_multiple(data,
                        si5345_preamble, ARRAY_SIZE(si5345_preamble));
        else
                res = si5341_write_multiple(data,
                        si5341_preamble, ARRAY_SIZE(si5341_preamble));
        if (res < 0)
                return res;

        /* Datasheet specifies a 300ms wait after sending the preamble */
        msleep(300);

        return 0;
}

/* Perform a soft reset and write post-amble */
static int si5341_finalize_defaults(struct clk_si5341 *data)
{
        int res;
        u32 revision;

        res = regmap_write(data->regmap, SI5341_IO_VDD_SEL,
                           data->iovdd_33 ? 1 : 0);
        if (res < 0)
                return res;

        res = regmap_read(data->regmap, SI5341_DEVICE_REV, &revision);
        if (res < 0)
                return res;

        dev_dbg(&data->i2c_client->dev, "%s rev=%u\n", __func__, revision);

        res = regmap_write(data->regmap, SI5341_SOFT_RST, 0x01);
        if (res < 0)
                return res;

        /* The si5342..si5345 have an additional post-amble */
        if (data->chip_id > 0x5341) {
                res = regmap_write(data->regmap, 0x540, 0x0);
                if (res < 0)
                        return res;
        }

        /* Datasheet does not explain these nameless registers */
        res = regmap_write(data->regmap, 0xB24, revision < 2 ? 0xDB : 0xC3);
        if (res < 0)
                return res;
        res = regmap_write(data->regmap, 0x0B25, 0x02);
        if (res < 0)
                return res;

        return 0;
}


static const struct regmap_range si5341_regmap_volatile_range[] = {
        regmap_reg_range(0x000C, 0x0012), /* Status */
        regmap_reg_range(0x001C, 0x001E), /* reset, finc/fdec */
        regmap_reg_range(0x00E2, 0x00FE), /* NVM, interrupts, device ready */
        /* Update bits for P divider and synth config */
        regmap_reg_range(SI5341_PX_UPD, SI5341_PX_UPD),
        regmap_reg_range(SI5341_SYNTH_N_UPD(0), SI5341_SYNTH_N_UPD(0)),
        regmap_reg_range(SI5341_SYNTH_N_UPD(1), SI5341_SYNTH_N_UPD(1)),
        regmap_reg_range(SI5341_SYNTH_N_UPD(2), SI5341_SYNTH_N_UPD(2)),
        regmap_reg_range(SI5341_SYNTH_N_UPD(3), SI5341_SYNTH_N_UPD(3)),
        regmap_reg_range(SI5341_SYNTH_N_UPD(4), SI5341_SYNTH_N_UPD(4)),
};

static const struct regmap_access_table si5341_regmap_volatile = {
        .yes_ranges = si5341_regmap_volatile_range,
        .n_yes_ranges = ARRAY_SIZE(si5341_regmap_volatile_range),
};

/* Pages 0, 1, 2, 3, 9, A, B are valid, so there are 12 pages */
static const struct regmap_range_cfg si5341_regmap_ranges[] = {
        {
                .range_min = 0,
                .range_max = SI5341_REGISTER_MAX,
                .selector_reg = SI5341_PAGE,
                .selector_mask = 0xff,
                .selector_shift = 0,
                .window_start = 0,
                .window_len = 256,
        },
};

static int si5341_wait_device_ready(struct i2c_client *client)
{
        int count;

        /* Datasheet warns: Any attempt to read or write any register other
         * than DEVICE_READY before DEVICE_READY reads as 0x0F may corrupt the
         * NVM programming and may corrupt the register contents, as they are
         * read from NVM. Note that this includes accesses to the PAGE register.
         * Also: DEVICE_READY is available on every register page, so no page
         * change is needed to read it.
         * Do this outside regmap to avoid automatic PAGE register access.
         * May take up to 300ms to complete.
         */
        for (count = 0; count < 15; ++count) {
                s32 result = i2c_smbus_read_byte_data(client,
                                                      SI5341_DEVICE_READY);
                if (result < 0)
                        return result;
                if (result == 0x0F)
                        return 0;
                msleep(20);
        }
        dev_err(&client->dev, "timeout waiting for DEVICE_READY\n");
        return -EIO;
}

static const struct regmap_config si5341_regmap_config = {
        .reg_bits = 8,
        .val_bits = 8,
        .cache_type = REGCACHE_MAPLE,
        .ranges = si5341_regmap_ranges,
        .num_ranges = ARRAY_SIZE(si5341_regmap_ranges),
        .max_register = SI5341_REGISTER_MAX,
        .volatile_table = &si5341_regmap_volatile,
};

static int si5341_dt_parse_dt(struct clk_si5341 *data,
                              struct clk_si5341_output_config *config)
{
        struct device_node *child;
        struct device_node *np = data->i2c_client->dev.of_node;
        u32 num;
        u32 val;

        memset(config, 0, sizeof(struct clk_si5341_output_config) *
                                SI5341_MAX_NUM_OUTPUTS);

        for_each_child_of_node(np, child) {
                if (of_property_read_u32(child, "reg", &num)) {
                        dev_err(&data->i2c_client->dev, "missing reg property of %s\n",
                                child->name);
                        goto put_child;
                }

                if (num >= SI5341_MAX_NUM_OUTPUTS) {
                        dev_err(&data->i2c_client->dev, "invalid clkout %d\n", num);
                        goto put_child;
                }

                if (!of_property_read_u32(child, "silabs,format", &val)) {
                        /* Set cm and ampl conservatively to 3v3 settings */
                        switch (val) {
                        case 1: /* normal differential */
                                config[num].out_cm_ampl_bits = 0x33;
                                break;
                        case 2: /* low-power differential */
                                config[num].out_cm_ampl_bits = 0x13;
                                break;
                        case 4: /* LVCMOS */
                                config[num].out_cm_ampl_bits = 0x33;
                                /* Set SI recommended impedance for LVCMOS */
                                config[num].out_format_drv_bits |= 0xc0;
                                break;
                        default:
                                dev_err(&data->i2c_client->dev,
                                        "invalid silabs,format %u for %u\n",
                                        val, num);
                                goto put_child;
                        }
                        config[num].out_format_drv_bits &= ~0x07;
                        config[num].out_format_drv_bits |= val & 0x07;
                        /* Always enable the SYNC feature */
                        config[num].out_format_drv_bits |= 0x08;
                }

                if (!of_property_read_u32(child, "silabs,common-mode", &val)) {
                        if (val > 0xf) {
                                dev_err(&data->i2c_client->dev,
                                        "invalid silabs,common-mode %u\n",
                                        val);
                                goto put_child;
                        }
                        config[num].out_cm_ampl_bits &= 0xf0;
                        config[num].out_cm_ampl_bits |= val & 0x0f;
                }

                if (!of_property_read_u32(child, "silabs,amplitude", &val)) {
                        if (val > 0xf) {
                                dev_err(&data->i2c_client->dev,
                                        "invalid silabs,amplitude %u\n",
                                        val);
                                goto put_child;
                        }
                        config[num].out_cm_ampl_bits &= 0x0f;
                        config[num].out_cm_ampl_bits |= (val << 4) & 0xf0;
                }

                if (of_property_read_bool(child, "silabs,disable-high"))
                        config[num].out_format_drv_bits |= 0x10;

                config[num].synth_master =
                        of_property_read_bool(child, "silabs,synth-master");

                config[num].always_on =
                        of_property_read_bool(child, "always-on");

                config[num].vdd_sel_bits = 0x08;
                if (data->clk[num].vddo_reg) {
                        int vdd = regulator_get_voltage(data->clk[num].vddo_reg);

                        switch (vdd) {
                        case 3300000:
                                config[num].vdd_sel_bits |= 0 << 4;
                                break;
                        case 1800000:
                                config[num].vdd_sel_bits |= 1 << 4;
                                break;
                        case 2500000:
                                config[num].vdd_sel_bits |= 2 << 4;
                                break;
                        default:
                                dev_err(&data->i2c_client->dev,
                                        "unsupported vddo voltage %d for %s\n",
                                        vdd, child->name);
                                goto put_child;
                        }
                } else {
                        /* chip seems to default to 2.5V when not set */
                        dev_warn(&data->i2c_client->dev,
                                "no regulator set, defaulting vdd_sel to 2.5V for %s\n",
                                child->name);
                        config[num].vdd_sel_bits |= 2 << 4;
                }
        }

        return 0;

put_child:
        of_node_put(child);
        return -EINVAL;
}

/*
 * If not pre-configured, calculate and set the PLL configuration manually.
 * For low-jitter performance, the PLL should be set such that the synthesizers
 * only need integer division.
 * Without any user guidance, we'll set the PLL to 14GHz, which still allows
 * the chip to generate any frequency on its outputs, but jitter performance
 * may be sub-optimal.
 */
static int si5341_initialize_pll(struct clk_si5341 *data)
{
        struct device_node *np = data->i2c_client->dev.of_node;
        u32 m_num = 0;
        u32 m_den = 0;
        int sel;

        if (of_property_read_u32(np, "silabs,pll-m-num", &m_num)) {
                dev_err(&data->i2c_client->dev,
                        "PLL configuration requires silabs,pll-m-num\n");
        }
        if (of_property_read_u32(np, "silabs,pll-m-den", &m_den)) {
                dev_err(&data->i2c_client->dev,
                        "PLL configuration requires silabs,pll-m-den\n");
        }

        if (!m_num || !m_den) {
                dev_err(&data->i2c_client->dev,
                        "PLL configuration invalid, assume 14GHz\n");
                sel = si5341_clk_get_selected_input(data);
                if (sel < 0)
                        return sel;

                m_den = clk_get_rate(data->input_clk[sel]) / 10;
                m_num = 1400000000;
        }

        return si5341_encode_44_32(data->regmap,
                        SI5341_PLL_M_NUM, m_num, m_den);
}

static int si5341_clk_select_active_input(struct clk_si5341 *data)
{
        int res;
        int err;
        int i;

        res = si5341_clk_get_selected_input(data);
        if (res < 0)
                return res;

        /* If the current register setting is invalid, pick the first input */
        if (!data->input_clk[res]) {
                dev_dbg(&data->i2c_client->dev,
                        "Input %d not connected, rerouting\n", res);
                res = -ENODEV;
                for (i = 0; i < SI5341_NUM_INPUTS; ++i) {
                        if (data->input_clk[i]) {
                                res = i;
                                break;
                        }
                }
                if (res < 0) {
                        dev_err(&data->i2c_client->dev,
                                "No clock input available\n");
                        return res;
                }
        }

        /* Make sure the selected clock is also enabled and routed */
        err = si5341_clk_reparent(data, res);
        if (err < 0)
                return err;

        err = clk_prepare_enable(data->input_clk[res]);
        if (err < 0)
                return err;

        return res;
}

static ssize_t input_present_show(struct device *dev,
                                  struct device_attribute *attr,
                                  char *buf)
{
        struct clk_si5341 *data = dev_get_drvdata(dev);
        u32 status;
        int res = regmap_read(data->regmap, SI5341_STATUS, &status);

        if (res < 0)
                return res;
        res = !(status & SI5341_STATUS_LOSREF);
        return sysfs_emit(buf, "%d\n", res);
}
static DEVICE_ATTR_RO(input_present);

static ssize_t input_present_sticky_show(struct device *dev,
                                         struct device_attribute *attr,
                                         char *buf)
{
        struct clk_si5341 *data = dev_get_drvdata(dev);
        u32 status;
        int res = regmap_read(data->regmap, SI5341_STATUS_STICKY, &status);

        if (res < 0)
                return res;
        res = !(status & SI5341_STATUS_LOSREF);
        return sysfs_emit(buf, "%d\n", res);
}
static DEVICE_ATTR_RO(input_present_sticky);

static ssize_t pll_locked_show(struct device *dev,
                               struct device_attribute *attr,
                               char *buf)
{
        struct clk_si5341 *data = dev_get_drvdata(dev);
        u32 status;
        int res = regmap_read(data->regmap, SI5341_STATUS, &status);

        if (res < 0)
                return res;
        res = !(status & SI5341_STATUS_LOL);
        return sysfs_emit(buf, "%d\n", res);
}
static DEVICE_ATTR_RO(pll_locked);

static ssize_t pll_locked_sticky_show(struct device *dev,
                                      struct device_attribute *attr,
                                      char *buf)
{
        struct clk_si5341 *data = dev_get_drvdata(dev);
        u32 status;
        int res = regmap_read(data->regmap, SI5341_STATUS_STICKY, &status);

        if (res < 0)
                return res;
        res = !(status & SI5341_STATUS_LOL);
        return sysfs_emit(buf, "%d\n", res);
}
static DEVICE_ATTR_RO(pll_locked_sticky);

static ssize_t clear_sticky_store(struct device *dev,
                                  struct device_attribute *attr,
                                  const char *buf, size_t count)
{
        struct clk_si5341 *data = dev_get_drvdata(dev);
        long val;

        if (kstrtol(buf, 10, &val))
                return -EINVAL;
        if (val) {
                int res = regmap_write(data->regmap, SI5341_STATUS_STICKY, 0);

                if (res < 0)
                        return res;
        }
        return count;
}
static DEVICE_ATTR_WO(clear_sticky);

static const struct attribute *si5341_attributes[] = {
        &dev_attr_input_present.attr,
        &dev_attr_input_present_sticky.attr,
        &dev_attr_pll_locked.attr,
        &dev_attr_pll_locked_sticky.attr,
        &dev_attr_clear_sticky.attr,
        NULL
};

static int si5341_probe(struct i2c_client *client)
{
        struct clk_si5341 *data;
        struct clk_init_data init;
        struct clk *input;
        const char *root_clock_name;
        const char *synth_clock_names[SI5341_NUM_SYNTH] = { NULL };
        int err;
        unsigned int i;
        struct clk_si5341_output_config config[SI5341_MAX_NUM_OUTPUTS];
        bool initialization_required;
        u32 status;

        data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
        if (!data)
                return -ENOMEM;

        data->i2c_client = client;

        /* Must be done before otherwise touching hardware */
        err = si5341_wait_device_ready(client);
        if (err)
                return err;

        for (i = 0; i < SI5341_NUM_INPUTS; ++i) {
                input = devm_clk_get(&client->dev, si5341_input_clock_names[i]);
                if (IS_ERR(input)) {
                        if (PTR_ERR(input) == -EPROBE_DEFER)
                                return -EPROBE_DEFER;
                        data->input_clk_name[i] = si5341_input_clock_names[i];
                } else {
                        data->input_clk[i] = input;
                        data->input_clk_name[i] = __clk_get_name(input);
                }
        }

        for (i = 0; i < SI5341_MAX_NUM_OUTPUTS; ++i) {
                char reg_name[10];

                snprintf(reg_name, sizeof(reg_name), "vddo%d", i);
                data->clk[i].vddo_reg = devm_regulator_get_optional(
                        &client->dev, reg_name);
                if (IS_ERR(data->clk[i].vddo_reg)) {
                        err = PTR_ERR(data->clk[i].vddo_reg);
                        data->clk[i].vddo_reg = NULL;
                        if (err == -ENODEV)
                                continue;
                        goto cleanup;
                } else {
                        err = regulator_enable(data->clk[i].vddo_reg);
                        if (err) {
                                dev_err(&client->dev,
                                        "failed to enable %s regulator: %d\n",
                                        reg_name, err);
                                data->clk[i].vddo_reg = NULL;
                                goto cleanup;
                        }
                }
        }

        err = si5341_dt_parse_dt(data, config);
        if (err)
                goto cleanup;

        if (of_property_read_string(client->dev.of_node, "clock-output-names",
                        &init.name))
                init.name = client->dev.of_node->name;
        root_clock_name = init.name;

        data->regmap = devm_regmap_init_i2c(client, &si5341_regmap_config);
        if (IS_ERR(data->regmap)) {
                err = PTR_ERR(data->regmap);
                goto cleanup;
        }

        i2c_set_clientdata(client, data);

        err = si5341_probe_chip_id(data);
        if (err < 0)
                goto cleanup;

        if (of_property_read_bool(client->dev.of_node, "silabs,reprogram")) {
                initialization_required = true;
        } else {
                err = si5341_is_programmed_already(data);
                if (err < 0)
                        goto cleanup;

                initialization_required = !err;
        }
        data->xaxb_ext_clk = of_property_read_bool(client->dev.of_node,
                                                   "silabs,xaxb-ext-clk");
        data->iovdd_33 = of_property_read_bool(client->dev.of_node,
                                               "silabs,iovdd-33");

        if (initialization_required) {
                /* Populate the regmap cache in preparation for "cache only" */
                err = si5341_read_settings(data);
                if (err < 0)
                        goto cleanup;

                err = si5341_send_preamble(data);
                if (err < 0)
                        goto cleanup;

                /*
                 * We intend to send all 'final' register values in a single
                 * transaction. So cache all register writes until we're done
                 * configuring.
                 */
                regcache_cache_only(data->regmap, true);

                /* Write the configuration pairs from the firmware blob */
                err = si5341_write_multiple(data, si5341_reg_defaults,
                                        ARRAY_SIZE(si5341_reg_defaults));
                if (err < 0)
                        goto cleanup;
        }

        /* Input must be up and running at this point */
        err = si5341_clk_select_active_input(data);
        if (err < 0)
                goto cleanup;

        if (initialization_required) {
                /* PLL configuration is required */
                err = si5341_initialize_pll(data);
                if (err < 0)
                        goto cleanup;
        }

        /* Register the PLL */
        init.parent_names = data->input_clk_name;
        init.num_parents = SI5341_NUM_INPUTS;
        init.ops = &si5341_clk_ops;
        init.flags = 0;
        data->hw.init = &init;

        err = devm_clk_hw_register(&client->dev, &data->hw);
        if (err) {
                dev_err(&client->dev, "clock registration failed\n");
                goto cleanup;
        }

        init.num_parents = 1;
        init.parent_names = &root_clock_name;
        init.ops = &si5341_synth_clk_ops;
        for (i = 0; i < data->num_synth; ++i) {
                synth_clock_names[i] = devm_kasprintf(&client->dev, GFP_KERNEL,
                                "%s.N%u", client->dev.of_node->name, i);
                if (!synth_clock_names[i]) {
                        err = -ENOMEM;
                        goto free_clk_names;
                }
                init.name = synth_clock_names[i];
                data->synth[i].index = i;
                data->synth[i].data = data;
                data->synth[i].hw.init = &init;
                err = devm_clk_hw_register(&client->dev, &data->synth[i].hw);
                if (err) {
                        dev_err(&client->dev,
                                "synth N%u registration failed\n", i);
                        goto free_clk_names;
                }
        }

        init.num_parents = data->num_synth;
        init.parent_names = synth_clock_names;
        init.ops = &si5341_output_clk_ops;
        for (i = 0; i < data->num_outputs; ++i) {
                init.name = kasprintf(GFP_KERNEL, "%s.%d",
                        client->dev.of_node->name, i);
                if (!init.name) {
                        err = -ENOMEM;
                        goto free_clk_names;
                }
                init.flags = config[i].synth_master ? CLK_SET_RATE_PARENT : 0;
                data->clk[i].index = i;
                data->clk[i].data = data;
                data->clk[i].hw.init = &init;
                if (config[i].out_format_drv_bits & 0x07) {
                        regmap_write(data->regmap,
                                SI5341_OUT_FORMAT(&data->clk[i]),
                                config[i].out_format_drv_bits);
                        regmap_write(data->regmap,
                                SI5341_OUT_CM(&data->clk[i]),
                                config[i].out_cm_ampl_bits);
                        regmap_update_bits(data->regmap,
                                SI5341_OUT_MUX_SEL(&data->clk[i]),
                                SI5341_OUT_MUX_VDD_SEL_MASK,
                                config[i].vdd_sel_bits);
                }
                err = devm_clk_hw_register(&client->dev, &data->clk[i].hw);
                kfree(init.name); /* clock framework made a copy of the name */
                if (err) {
                        dev_err(&client->dev,
                                "output %u registration failed\n", i);
                        goto free_clk_names;
                }
                if (config[i].always_on)
                        clk_prepare(data->clk[i].hw.clk);
        }

        err = devm_of_clk_add_hw_provider(&client->dev, of_clk_si5341_get,
                        data);
        if (err) {
                dev_err(&client->dev, "unable to add clk provider\n");
                goto free_clk_names;
        }

        if (initialization_required) {
                /* Synchronize */
                regcache_cache_only(data->regmap, false);
                err = regcache_sync(data->regmap);
                if (err < 0)
                        goto free_clk_names;

                err = si5341_finalize_defaults(data);
                if (err < 0)
                        goto free_clk_names;
        }

        /* wait for device to report input clock present and PLL lock */
        err = regmap_read_poll_timeout(data->regmap, SI5341_STATUS, status,
                !(status & (SI5341_STATUS_LOSREF | SI5341_STATUS_LOL)),
               10000, 250000);
        if (err) {
                dev_err(&client->dev, "Error waiting for input clock or PLL lock\n");
                goto free_clk_names;
        }

        /* clear sticky alarm bits from initialization */
        err = regmap_write(data->regmap, SI5341_STATUS_STICKY, 0);
        if (err) {
                dev_err(&client->dev, "unable to clear sticky status\n");
                goto free_clk_names;
        }

        err = sysfs_create_files(&client->dev.kobj, si5341_attributes);
        if (err)
                dev_err(&client->dev, "unable to create sysfs files\n");

free_clk_names:
        /* Free the names, clk framework makes copies */
        for (i = 0; i < data->num_synth; ++i)
                 devm_kfree(&client->dev, (void *)synth_clock_names[i]);

cleanup:
        if (err) {
                for (i = 0; i < SI5341_MAX_NUM_OUTPUTS; ++i) {
                        if (data->clk[i].vddo_reg)
                                regulator_disable(data->clk[i].vddo_reg);
                }
        }
        return err;
}

static void si5341_remove(struct i2c_client *client)
{
        struct clk_si5341 *data = i2c_get_clientdata(client);
        int i;

        sysfs_remove_files(&client->dev.kobj, si5341_attributes);

        for (i = 0; i < SI5341_MAX_NUM_OUTPUTS; ++i) {
                if (data->clk[i].vddo_reg)
                        regulator_disable(data->clk[i].vddo_reg);
        }
}

static const struct i2c_device_id si5341_id[] = {
        { "si5340", 0 },
        { "si5341", 1 },
        { "si5342", 2 },
        { "si5344", 4 },
        { "si5345", 5 },
        { }
};
MODULE_DEVICE_TABLE(i2c, si5341_id);

static const struct of_device_id clk_si5341_of_match[] = {
        { .compatible = "silabs,si5340" },
        { .compatible = "silabs,si5341" },
        { .compatible = "silabs,si5342" },
        { .compatible = "silabs,si5344" },
        { .compatible = "silabs,si5345" },
        { }
};
MODULE_DEVICE_TABLE(of, clk_si5341_of_match);

static struct i2c_driver si5341_driver = {
        .driver = {
                .name = "si5341",
                .of_match_table = clk_si5341_of_match,
        },
        .probe          = si5341_probe,
        .remove         = si5341_remove,
        .id_table       = si5341_id,
};
module_i2c_driver(si5341_driver);

MODULE_AUTHOR("Mike Looijmans <mike.looijmans@topic.nl>");
MODULE_DESCRIPTION("Si5341 driver");
MODULE_LICENSE("GPL");
Linux
