// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)
/*
 * core.c - DesignWare HS OTG Controller common routines
 *
 * Copyright (C) 2004-2013 Synopsys, Inc.
 */

/*
 * The Core code provides basic services for accessing and managing the
 * DWC_otg hardware. These services are used by both the Host Controller
 * Driver and the Peripheral Controller Driver.
 */
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/usb.h>

#include <linux/usb/hcd.h>
#include <linux/usb/ch11.h>

#include "core.h"
#include "hcd.h"

/**
 * dwc2_backup_global_registers() - Backup global controller registers.
 * When suspending usb bus, registers needs to be backuped
 * if controller power is disabled once suspended.
 *
 * @hsotg: Programming view of the DWC_otg controller
 */
int dwc2_backup_global_registers(struct dwc2_hsotg *hsotg)
{
        struct dwc2_gregs_backup *gr;

        dev_dbg(hsotg->dev, "%s\n", __func__);

        /* Backup global regs */
        gr = &hsotg->gr_backup;

        gr->gintsts = dwc2_readl(hsotg, GINTSTS);
        gr->gotgctl = dwc2_readl(hsotg, GOTGCTL);
        gr->gintmsk = dwc2_readl(hsotg, GINTMSK);
        gr->gahbcfg = dwc2_readl(hsotg, GAHBCFG);
        gr->gusbcfg = dwc2_readl(hsotg, GUSBCFG);
        gr->grxfsiz = dwc2_readl(hsotg, GRXFSIZ);
        gr->gnptxfsiz = dwc2_readl(hsotg, GNPTXFSIZ);
        gr->gdfifocfg = dwc2_readl(hsotg, GDFIFOCFG);
        gr->pcgcctl1 = dwc2_readl(hsotg, PCGCCTL1);
        gr->glpmcfg = dwc2_readl(hsotg, GLPMCFG);
        gr->gi2cctl = dwc2_readl(hsotg, GI2CCTL);
        gr->pcgcctl = dwc2_readl(hsotg, PCGCTL);

        gr->valid = true;
        return 0;
}

/**
 * dwc2_restore_global_registers() - Restore controller global registers.
 * When resuming usb bus, device registers needs to be restored
 * if controller power were disabled.
 *
 * @hsotg: Programming view of the DWC_otg controller
 */
int dwc2_restore_global_registers(struct dwc2_hsotg *hsotg)
{
        struct dwc2_gregs_backup *gr;

        dev_dbg(hsotg->dev, "%s\n", __func__);

        /* Restore global regs */
        gr = &hsotg->gr_backup;
        if (!gr->valid) {
                dev_err(hsotg->dev, "%s: no global registers to restore\n",
                        __func__);
                return -EINVAL;
        }
        gr->valid = false;

        dwc2_writel(hsotg, 0xffffffff, GINTSTS);
        dwc2_writel(hsotg, gr->gotgctl, GOTGCTL);
        dwc2_writel(hsotg, gr->gintmsk, GINTMSK);
        dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);
        dwc2_writel(hsotg, gr->gahbcfg, GAHBCFG);
        dwc2_writel(hsotg, gr->grxfsiz, GRXFSIZ);
        dwc2_writel(hsotg, gr->gnptxfsiz, GNPTXFSIZ);
        dwc2_writel(hsotg, gr->gdfifocfg, GDFIFOCFG);
        dwc2_writel(hsotg, gr->pcgcctl1, PCGCCTL1);
        dwc2_writel(hsotg, gr->glpmcfg, GLPMCFG);
        dwc2_writel(hsotg, gr->pcgcctl, PCGCTL);
        dwc2_writel(hsotg, gr->gi2cctl, GI2CCTL);

        return 0;
}

/**
 * dwc2_exit_partial_power_down() - Exit controller from Partial Power Down.
 *
 * @hsotg: Programming view of the DWC_otg controller
 * @rem_wakeup: indicates whether resume is initiated by Reset.
 * @restore: Controller registers need to be restored
 */
int dwc2_exit_partial_power_down(struct dwc2_hsotg *hsotg, int rem_wakeup,
                                 bool restore)
{
        struct dwc2_gregs_backup *gr;

        gr = &hsotg->gr_backup;

        /*
         * Restore host or device regisers with the same mode core enterted
         * to partial power down by checking "GOTGCTL_CURMODE_HOST" backup
         * value of the "gotgctl" register.
         */
        if (gr->gotgctl & GOTGCTL_CURMODE_HOST)
                return dwc2_host_exit_partial_power_down(hsotg, rem_wakeup,
                                                         restore);
        else
                return dwc2_gadget_exit_partial_power_down(hsotg, restore);
}

/**
 * dwc2_enter_partial_power_down() - Put controller in Partial Power Down.
 *
 * @hsotg: Programming view of the DWC_otg controller
 */
int dwc2_enter_partial_power_down(struct dwc2_hsotg *hsotg)
{
        if (dwc2_is_host_mode(hsotg))
                return dwc2_host_enter_partial_power_down(hsotg);
        else
                return dwc2_gadget_enter_partial_power_down(hsotg);
}

/**
 * dwc2_restore_essential_regs() - Restore essiential regs of core.
 *
 * @hsotg: Programming view of the DWC_otg controller
 * @rmode: Restore mode, enabled in case of remote-wakeup.
 * @is_host: Host or device mode.
 */
static void dwc2_restore_essential_regs(struct dwc2_hsotg *hsotg, int rmode,
                                        int is_host)
{
        u32 pcgcctl;
        struct dwc2_gregs_backup *gr;
        struct dwc2_dregs_backup *dr;
        struct dwc2_hregs_backup *hr;

        gr = &hsotg->gr_backup;
        dr = &hsotg->dr_backup;
        hr = &hsotg->hr_backup;

        dev_dbg(hsotg->dev, "%s: restoring essential regs\n", __func__);

        /* Load restore values for [31:14] bits */
        pcgcctl = (gr->pcgcctl & 0xffffc000);
        /* If High Speed */
        if (is_host) {
                if (!(pcgcctl & PCGCTL_P2HD_PRT_SPD_MASK))
                        pcgcctl |= BIT(17);
        } else {
                if (!(pcgcctl & PCGCTL_P2HD_DEV_ENUM_SPD_MASK))
                        pcgcctl |= BIT(17);
        }
        dwc2_writel(hsotg, pcgcctl, PCGCTL);

        /* Umnask global Interrupt in GAHBCFG and restore it */
        dwc2_writel(hsotg, gr->gahbcfg | GAHBCFG_GLBL_INTR_EN, GAHBCFG);

        /* Clear all pending interupts */
        dwc2_writel(hsotg, 0xffffffff, GINTSTS);

        /* Unmask restore done interrupt */
        dwc2_writel(hsotg, GINTSTS_RESTOREDONE, GINTMSK);

        /* Restore GUSBCFG and HCFG/DCFG */
        dwc2_writel(hsotg, gr->gusbcfg, GUSBCFG);

        if (is_host) {
                dwc2_writel(hsotg, hr->hcfg, HCFG);
                if (rmode)
                        pcgcctl |= PCGCTL_RESTOREMODE;
                dwc2_writel(hsotg, pcgcctl, PCGCTL);
                udelay(10);

                pcgcctl |= PCGCTL_ESS_REG_RESTORED;
                dwc2_writel(hsotg, pcgcctl, PCGCTL);
                udelay(10);
        } else {
                dwc2_writel(hsotg, dr->dcfg, DCFG);
                if (!rmode)
                        pcgcctl |= PCGCTL_RESTOREMODE | PCGCTL_RSTPDWNMODULE;
                dwc2_writel(hsotg, pcgcctl, PCGCTL);
                udelay(10);

                pcgcctl |= PCGCTL_ESS_REG_RESTORED;
                dwc2_writel(hsotg, pcgcctl, PCGCTL);
                udelay(10);
        }
}

/**
 * dwc2_hib_restore_common() - Common part of restore routine.
 *
 * @hsotg: Programming view of the DWC_otg controller
 * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup.
 * @is_host: Host or device mode.
 */
void dwc2_hib_restore_common(struct dwc2_hsotg *hsotg, int rem_wakeup,
                             int is_host)
{
        u32 gpwrdn;

        /* Switch-on voltage to the core */
        gpwrdn = dwc2_readl(hsotg, GPWRDN);
        gpwrdn &= ~GPWRDN_PWRDNSWTCH;
        dwc2_writel(hsotg, gpwrdn, GPWRDN);
        udelay(10);

        /* Reset core */
        gpwrdn = dwc2_readl(hsotg, GPWRDN);
        gpwrdn &= ~GPWRDN_PWRDNRSTN;
        dwc2_writel(hsotg, gpwrdn, GPWRDN);
        udelay(10);

        /* Enable restore from PMU */
        gpwrdn = dwc2_readl(hsotg, GPWRDN);
        gpwrdn |= GPWRDN_RESTORE;
        dwc2_writel(hsotg, gpwrdn, GPWRDN);
        udelay(10);

        /* Disable Power Down Clamp */
        gpwrdn = dwc2_readl(hsotg, GPWRDN);
        gpwrdn &= ~GPWRDN_PWRDNCLMP;
        dwc2_writel(hsotg, gpwrdn, GPWRDN);
        udelay(50);

        if (!is_host && rem_wakeup)
                udelay(70);

        /* Deassert reset core */
        gpwrdn = dwc2_readl(hsotg, GPWRDN);
        gpwrdn |= GPWRDN_PWRDNRSTN;
        dwc2_writel(hsotg, gpwrdn, GPWRDN);
        udelay(10);

        /* Reset ULPI latch */
        gpwrdn = dwc2_readl(hsotg, GPWRDN);
        gpwrdn &= ~GPWRDN_ULPI_LATCH_EN_DURING_HIB_ENTRY;
        dwc2_writel(hsotg, gpwrdn, GPWRDN);

        /* Disable PMU interrupt */
        gpwrdn = dwc2_readl(hsotg, GPWRDN);
        gpwrdn &= ~GPWRDN_PMUINTSEL;
        dwc2_writel(hsotg, gpwrdn, GPWRDN);
        udelay(10);

        /* Set Restore Essential Regs bit in PCGCCTL register */
        dwc2_restore_essential_regs(hsotg, rem_wakeup, is_host);

        /*
         * Wait For Restore_done Interrupt. This mechanism of polling the
         * interrupt is introduced to avoid any possible race conditions
         */
        if (dwc2_hsotg_wait_bit_set(hsotg, GINTSTS, GINTSTS_RESTOREDONE,
                                    20000)) {
                dev_dbg(hsotg->dev,
                        "%s: Restore Done wasn't generated here\n",
                        __func__);
        } else {
                dev_dbg(hsotg->dev, "restore done  generated here\n");

                /*
                 * To avoid restore done interrupt storm after restore is
                 * generated clear GINTSTS_RESTOREDONE bit.
                 */
                dwc2_writel(hsotg, GINTSTS_RESTOREDONE, GINTSTS);
        }
}

/**
 * dwc2_wait_for_mode() - Waits for the controller mode.
 * @hsotg:      Programming view of the DWC_otg controller.
 * @host_mode:  If true, waits for host mode, otherwise device mode.
 */
static void dwc2_wait_for_mode(struct dwc2_hsotg *hsotg,
                               bool host_mode)
{
        ktime_t start;
        ktime_t end;
        unsigned int timeout = 110;

        dev_vdbg(hsotg->dev, "Waiting for %s mode\n",
                 host_mode ? "host" : "device");

        start = ktime_get();

        while (1) {
                s64 ms;

                if (dwc2_is_host_mode(hsotg) == host_mode) {
                        dev_vdbg(hsotg->dev, "%s mode set\n",
                                 host_mode ? "Host" : "Device");
                        break;
                }

                end = ktime_get();
                ms = ktime_to_ms(ktime_sub(end, start));

                if (ms >= (s64)timeout) {
                        dev_warn(hsotg->dev, "%s: Couldn't set %s mode\n",
                                 __func__, host_mode ? "host" : "device");
                        break;
                }

                usleep_range(1000, 2000);
        }
}

/**
 * dwc2_iddig_filter_enabled() - Returns true if the IDDIG debounce
 * filter is enabled.
 *
 * @hsotg: Programming view of DWC_otg controller
 */
static bool dwc2_iddig_filter_enabled(struct dwc2_hsotg *hsotg)
{
        u32 gsnpsid;
        u32 ghwcfg4;

        if (!dwc2_hw_is_otg(hsotg))
                return false;

        /* Check if core configuration includes the IDDIG filter. */
        ghwcfg4 = dwc2_readl(hsotg, GHWCFG4);
        if (!(ghwcfg4 & GHWCFG4_IDDIG_FILT_EN))
                return false;

        /*
         * Check if the IDDIG debounce filter is bypassed. Available
         * in core version >= 3.10a.
         */
        gsnpsid = dwc2_readl(hsotg, GSNPSID);
        if (gsnpsid >= DWC2_CORE_REV_3_10a) {
                u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);

                if (gotgctl & GOTGCTL_DBNCE_FLTR_BYPASS)
                        return false;
        }

        return true;
}

/*
 * dwc2_enter_hibernation() - Common function to enter hibernation.
 *
 * @hsotg: Programming view of the DWC_otg controller
 * @is_host: True if core is in host mode.
 *
 * Return: 0 if successful, negative error code otherwise
 */
int dwc2_enter_hibernation(struct dwc2_hsotg *hsotg, int is_host)
{
        if (is_host)
                return dwc2_host_enter_hibernation(hsotg);
        else
                return dwc2_gadget_enter_hibernation(hsotg);
}

/*
 * dwc2_exit_hibernation() - Common function to exit from hibernation.
 *
 * @hsotg: Programming view of the DWC_otg controller
 * @rem_wakeup: Remote-wakeup, enabled in case of remote-wakeup.
 * @reset: Enabled in case of restore with reset.
 * @is_host: True if core is in host mode.
 *
 * Return: 0 if successful, negative error code otherwise
 */
int dwc2_exit_hibernation(struct dwc2_hsotg *hsotg, int rem_wakeup,
                          int reset, int is_host)
{
        if (is_host)
                return dwc2_host_exit_hibernation(hsotg, rem_wakeup, reset);
        else
                return dwc2_gadget_exit_hibernation(hsotg, rem_wakeup, reset);
}

/*
 * Do core a soft reset of the core.  Be careful with this because it
 * resets all the internal state machines of the core.
 */
int dwc2_core_reset(struct dwc2_hsotg *hsotg, bool skip_wait)
{
        u32 greset;
        bool wait_for_host_mode = false;

        dev_vdbg(hsotg->dev, "%s()\n", __func__);

        /*
         * If the current mode is host, either due to the force mode
         * bit being set (which persists after core reset) or the
         * connector id pin, a core soft reset will temporarily reset
         * the mode to device. A delay from the IDDIG debounce filter
         * will occur before going back to host mode.
         *
         * Determine whether we will go back into host mode after a
         * reset and account for this delay after the reset.
         */
        if (dwc2_iddig_filter_enabled(hsotg)) {
                u32 gotgctl = dwc2_readl(hsotg, GOTGCTL);
                u32 gusbcfg = dwc2_readl(hsotg, GUSBCFG);

                if (!(gotgctl & GOTGCTL_CONID_B) ||
                    (gusbcfg & GUSBCFG_FORCEHOSTMODE)) {
                        wait_for_host_mode = true;
                }
        }

        /* Core Soft Reset */
        greset = dwc2_readl(hsotg, GRSTCTL);
        greset |= GRSTCTL_CSFTRST;
        dwc2_writel(hsotg, greset, GRSTCTL);

        if ((hsotg->hw_params.snpsid & DWC2_CORE_REV_MASK) <
                (DWC2_CORE_REV_4_20a & DWC2_CORE_REV_MASK)) {
                if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL,
                                              GRSTCTL_CSFTRST, 10000)) {
                        dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL_CSFTRST\n",
                                 __func__);
                        return -EBUSY;
                }
        } else {
                if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL,
                                            GRSTCTL_CSFTRST_DONE, 10000)) {
                        dev_warn(hsotg->dev, "%s: HANG! Soft Reset timeout GRSTCTL_CSFTRST_DONE\n",
                                 __func__);
                        return -EBUSY;
                }
                greset = dwc2_readl(hsotg, GRSTCTL);
                greset &= ~GRSTCTL_CSFTRST;
                greset |= GRSTCTL_CSFTRST_DONE;
                dwc2_writel(hsotg, greset, GRSTCTL);
        }

        /*
         * Switching from device mode to host mode by disconnecting
         * device cable core enters and exits form hibernation.
         * However, the fifo map remains not cleared. It results
         * to a WARNING (WARNING: CPU: 5 PID: 0 at drivers/usb/dwc2/
         * gadget.c:307 dwc2_hsotg_init_fifo+0x12/0x152 [dwc2])
         * if in host mode we disconnect the micro a to b host
         * cable. Because core reset occurs.
         * To avoid the WARNING, fifo_map should be cleared
         * in dwc2_core_reset() function by taking into account configs.
         * fifo_map must be cleared only if driver is configured in
         * "CONFIG_USB_DWC2_PERIPHERAL" or "CONFIG_USB_DWC2_DUAL_ROLE"
         * mode.
         */
        dwc2_clear_fifo_map(hsotg);

        /* Wait for AHB master IDLE state */
        if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) {
                dev_warn(hsotg->dev, "%s: HANG! AHB Idle timeout GRSTCTL GRSTCTL_AHBIDLE\n",
                         __func__);
                return -EBUSY;
        }

        if (wait_for_host_mode && !skip_wait)
                dwc2_wait_for_mode(hsotg, true);

        return 0;
}

/**
 * dwc2_force_mode() - Force the mode of the controller.
 *
 * Forcing the mode is needed for two cases:
 *
 * 1) If the dr_mode is set to either HOST or PERIPHERAL we force the
 * controller to stay in a particular mode regardless of ID pin
 * changes. We do this once during probe.
 *
 * 2) During probe we want to read reset values of the hw
 * configuration registers that are only available in either host or
 * device mode. We may need to force the mode if the current mode does
 * not allow us to access the register in the mode that we want.
 *
 * In either case it only makes sense to force the mode if the
 * controller hardware is OTG capable.
 *
 * Checks are done in this function to determine whether doing a force
 * would be valid or not.
 *
 * If a force is done, it requires a IDDIG debounce filter delay if
 * the filter is configured and enabled. We poll the current mode of
 * the controller to account for this delay.
 *
 * @hsotg: Programming view of DWC_otg controller
 * @host: Host mode flag
 */
void dwc2_force_mode(struct dwc2_hsotg *hsotg, bool host)
{
        u32 gusbcfg;
        u32 set;
        u32 clear;

        dev_dbg(hsotg->dev, "Forcing mode to %s\n", host ? "host" : "device");

        /*
         * Force mode has no effect if the hardware is not OTG.
         */
        if (!dwc2_hw_is_otg(hsotg))
                return;

        /*
         * If dr_mode is either peripheral or host only, there is no
         * need to ever force the mode to the opposite mode.
         */
        if (WARN_ON(host && hsotg->dr_mode == USB_DR_MODE_PERIPHERAL))
                return;

        if (WARN_ON(!host && hsotg->dr_mode == USB_DR_MODE_HOST))
                return;

        gusbcfg = dwc2_readl(hsotg, GUSBCFG);

        set = host ? GUSBCFG_FORCEHOSTMODE : GUSBCFG_FORCEDEVMODE;
        clear = host ? GUSBCFG_FORCEDEVMODE : GUSBCFG_FORCEHOSTMODE;

        gusbcfg &= ~clear;
        gusbcfg |= set;
        dwc2_writel(hsotg, gusbcfg, GUSBCFG);

        dwc2_wait_for_mode(hsotg, host);
        return;
}

/**
 * dwc2_clear_force_mode() - Clears the force mode bits.
 *
 * After clearing the bits, wait up to 100 ms to account for any
 * potential IDDIG filter delay. We can't know if we expect this delay
 * or not because the value of the connector ID status is affected by
 * the force mode. We only need to call this once during probe if
 * dr_mode == OTG.
 *
 * @hsotg: Programming view of DWC_otg controller
 */
static void dwc2_clear_force_mode(struct dwc2_hsotg *hsotg)
{
        u32 gusbcfg;

        if (!dwc2_hw_is_otg(hsotg))
                return;

        dev_dbg(hsotg->dev, "Clearing force mode bits\n");

        gusbcfg = dwc2_readl(hsotg, GUSBCFG);
        gusbcfg &= ~GUSBCFG_FORCEHOSTMODE;
        gusbcfg &= ~GUSBCFG_FORCEDEVMODE;
        dwc2_writel(hsotg, gusbcfg, GUSBCFG);

        if (dwc2_iddig_filter_enabled(hsotg))
                msleep(100);
}

/*
 * Sets or clears force mode based on the dr_mode parameter.
 */
void dwc2_force_dr_mode(struct dwc2_hsotg *hsotg)
{
        switch (hsotg->dr_mode) {
        case USB_DR_MODE_HOST:
                dwc2_force_mode(hsotg, true);
                /*
                 * NOTE: This is required for some rockchip soc based
                 * platforms on their host-only dwc2.
                 */
                if (!dwc2_hw_is_otg(hsotg))
                        msleep(50);

                break;
        case USB_DR_MODE_PERIPHERAL:
                dwc2_force_mode(hsotg, false);
                break;
        case USB_DR_MODE_OTG:
                dwc2_clear_force_mode(hsotg);
                break;
        default:
                dev_warn(hsotg->dev, "%s() Invalid dr_mode=%d\n",
                         __func__, hsotg->dr_mode);
                break;
        }
}

/*
 * dwc2_enable_acg - enable active clock gating feature
 */
void dwc2_enable_acg(struct dwc2_hsotg *hsotg)
{
        if (hsotg->params.acg_enable) {
                u32 pcgcctl1 = dwc2_readl(hsotg, PCGCCTL1);

                dev_dbg(hsotg->dev, "Enabling Active Clock Gating\n");
                pcgcctl1 |= PCGCCTL1_GATEEN;
                dwc2_writel(hsotg, pcgcctl1, PCGCCTL1);
        }
}

/**
 * dwc2_dump_host_registers() - Prints the host registers
 *
 * @hsotg: Programming view of DWC_otg controller
 *
 * NOTE: This function will be removed once the peripheral controller code
 * is integrated and the driver is stable
 */
void dwc2_dump_host_registers(struct dwc2_hsotg *hsotg)
{
#ifdef DEBUG
        u32 __iomem *addr;
        int i;

        dev_dbg(hsotg->dev, "Host Global Registers\n");
        addr = hsotg->regs + HCFG;
        dev_dbg(hsotg->dev, "HCFG        @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, HCFG));
        addr = hsotg->regs + HFIR;
        dev_dbg(hsotg->dev, "HFIR        @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, HFIR));
        addr = hsotg->regs + HFNUM;
        dev_dbg(hsotg->dev, "HFNUM       @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, HFNUM));
        addr = hsotg->regs + HPTXSTS;
        dev_dbg(hsotg->dev, "HPTXSTS     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, HPTXSTS));
        addr = hsotg->regs + HAINT;
        dev_dbg(hsotg->dev, "HAINT       @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, HAINT));
        addr = hsotg->regs + HAINTMSK;
        dev_dbg(hsotg->dev, "HAINTMSK    @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, HAINTMSK));
        if (hsotg->params.dma_desc_enable) {
                addr = hsotg->regs + HFLBADDR;
                dev_dbg(hsotg->dev, "HFLBADDR @0x%08lX : 0x%08X\n",
                        (unsigned long)addr, dwc2_readl(hsotg, HFLBADDR));
        }

        addr = hsotg->regs + HPRT0;
        dev_dbg(hsotg->dev, "HPRT0       @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, HPRT0));

        for (i = 0; i < hsotg->params.host_channels; i++) {
                dev_dbg(hsotg->dev, "Host Channel %d Specific Registers\n", i);
                addr = hsotg->regs + HCCHAR(i);
                dev_dbg(hsotg->dev, "HCCHAR      @0x%08lX : 0x%08X\n",
                        (unsigned long)addr, dwc2_readl(hsotg, HCCHAR(i)));
                addr = hsotg->regs + HCSPLT(i);
                dev_dbg(hsotg->dev, "HCSPLT      @0x%08lX : 0x%08X\n",
                        (unsigned long)addr, dwc2_readl(hsotg, HCSPLT(i)));
                addr = hsotg->regs + HCINT(i);
                dev_dbg(hsotg->dev, "HCINT       @0x%08lX : 0x%08X\n",
                        (unsigned long)addr, dwc2_readl(hsotg, HCINT(i)));
                addr = hsotg->regs + HCINTMSK(i);
                dev_dbg(hsotg->dev, "HCINTMSK    @0x%08lX : 0x%08X\n",
                        (unsigned long)addr, dwc2_readl(hsotg, HCINTMSK(i)));
                addr = hsotg->regs + HCTSIZ(i);
                dev_dbg(hsotg->dev, "HCTSIZ      @0x%08lX : 0x%08X\n",
                        (unsigned long)addr, dwc2_readl(hsotg, HCTSIZ(i)));
                addr = hsotg->regs + HCDMA(i);
                dev_dbg(hsotg->dev, "HCDMA       @0x%08lX : 0x%08X\n",
                        (unsigned long)addr, dwc2_readl(hsotg, HCDMA(i)));
                if (hsotg->params.dma_desc_enable) {
                        addr = hsotg->regs + HCDMAB(i);
                        dev_dbg(hsotg->dev, "HCDMAB      @0x%08lX : 0x%08X\n",
                                (unsigned long)addr, dwc2_readl(hsotg,
                                                                HCDMAB(i)));
                }
        }
#endif
}

/**
 * dwc2_dump_global_registers() - Prints the core global registers
 *
 * @hsotg: Programming view of DWC_otg controller
 *
 * NOTE: This function will be removed once the peripheral controller code
 * is integrated and the driver is stable
 */
void dwc2_dump_global_registers(struct dwc2_hsotg *hsotg)
{
#ifdef DEBUG
        u32 __iomem *addr;

        dev_dbg(hsotg->dev, "Core Global Registers\n");
        addr = hsotg->regs + GOTGCTL;
        dev_dbg(hsotg->dev, "GOTGCTL     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GOTGCTL));
        addr = hsotg->regs + GOTGINT;
        dev_dbg(hsotg->dev, "GOTGINT     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GOTGINT));
        addr = hsotg->regs + GAHBCFG;
        dev_dbg(hsotg->dev, "GAHBCFG     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GAHBCFG));
        addr = hsotg->regs + GUSBCFG;
        dev_dbg(hsotg->dev, "GUSBCFG     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GUSBCFG));
        addr = hsotg->regs + GRSTCTL;
        dev_dbg(hsotg->dev, "GRSTCTL     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GRSTCTL));
        addr = hsotg->regs + GINTSTS;
        dev_dbg(hsotg->dev, "GINTSTS     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GINTSTS));
        addr = hsotg->regs + GINTMSK;
        dev_dbg(hsotg->dev, "GINTMSK     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GINTMSK));
        addr = hsotg->regs + GRXSTSR;
        dev_dbg(hsotg->dev, "GRXSTSR     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GRXSTSR));
        addr = hsotg->regs + GRXFSIZ;
        dev_dbg(hsotg->dev, "GRXFSIZ     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GRXFSIZ));
        addr = hsotg->regs + GNPTXFSIZ;
        dev_dbg(hsotg->dev, "GNPTXFSIZ   @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GNPTXFSIZ));
        addr = hsotg->regs + GNPTXSTS;
        dev_dbg(hsotg->dev, "GNPTXSTS    @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GNPTXSTS));
        addr = hsotg->regs + GI2CCTL;
        dev_dbg(hsotg->dev, "GI2CCTL     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GI2CCTL));
        addr = hsotg->regs + GPVNDCTL;
        dev_dbg(hsotg->dev, "GPVNDCTL    @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GPVNDCTL));
        addr = hsotg->regs + GGPIO;
        dev_dbg(hsotg->dev, "GGPIO       @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GGPIO));
        addr = hsotg->regs + GUID;
        dev_dbg(hsotg->dev, "GUID        @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GUID));
        addr = hsotg->regs + GSNPSID;
        dev_dbg(hsotg->dev, "GSNPSID     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GSNPSID));
        addr = hsotg->regs + GHWCFG1;
        dev_dbg(hsotg->dev, "GHWCFG1     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GHWCFG1));
        addr = hsotg->regs + GHWCFG2;
        dev_dbg(hsotg->dev, "GHWCFG2     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GHWCFG2));
        addr = hsotg->regs + GHWCFG3;
        dev_dbg(hsotg->dev, "GHWCFG3     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GHWCFG3));
        addr = hsotg->regs + GHWCFG4;
        dev_dbg(hsotg->dev, "GHWCFG4     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GHWCFG4));
        addr = hsotg->regs + GLPMCFG;
        dev_dbg(hsotg->dev, "GLPMCFG     @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GLPMCFG));
        addr = hsotg->regs + GPWRDN;
        dev_dbg(hsotg->dev, "GPWRDN      @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GPWRDN));
        addr = hsotg->regs + GDFIFOCFG;
        dev_dbg(hsotg->dev, "GDFIFOCFG   @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, GDFIFOCFG));
        addr = hsotg->regs + HPTXFSIZ;
        dev_dbg(hsotg->dev, "HPTXFSIZ    @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, HPTXFSIZ));

        addr = hsotg->regs + PCGCTL;
        dev_dbg(hsotg->dev, "PCGCTL      @0x%08lX : 0x%08X\n",
                (unsigned long)addr, dwc2_readl(hsotg, PCGCTL));
#endif
}

/**
 * dwc2_flush_tx_fifo() - Flushes a Tx FIFO
 *
 * @hsotg: Programming view of DWC_otg controller
 * @num:   Tx FIFO to flush
 */
void dwc2_flush_tx_fifo(struct dwc2_hsotg *hsotg, const int num)
{
        u32 greset;

        dev_vdbg(hsotg->dev, "Flush Tx FIFO %d\n", num);

        /* Wait for AHB master IDLE state */
        if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000))
                dev_warn(hsotg->dev, "%s:  HANG! AHB Idle GRSCTL\n",
                         __func__);

        greset = GRSTCTL_TXFFLSH;
        greset |= num << GRSTCTL_TXFNUM_SHIFT & GRSTCTL_TXFNUM_MASK;
        dwc2_writel(hsotg, greset, GRSTCTL);

        if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_TXFFLSH, 10000))
                dev_warn(hsotg->dev, "%s:  HANG! timeout GRSTCTL GRSTCTL_TXFFLSH\n",
                         __func__);

        /* Wait for at least 3 PHY Clocks */
        udelay(1);
}

/**
 * dwc2_flush_rx_fifo() - Flushes the Rx FIFO
 *
 * @hsotg: Programming view of DWC_otg controller
 */
void dwc2_flush_rx_fifo(struct dwc2_hsotg *hsotg)
{
        u32 greset;

        dev_vdbg(hsotg->dev, "%s()\n", __func__);

        /* Wait for AHB master IDLE state */
        if (dwc2_hsotg_wait_bit_set(hsotg, GRSTCTL, GRSTCTL_AHBIDLE, 10000))
                dev_warn(hsotg->dev, "%s:  HANG! AHB Idle GRSCTL\n",
                         __func__);

        greset = GRSTCTL_RXFFLSH;
        dwc2_writel(hsotg, greset, GRSTCTL);

        /* Wait for RxFIFO flush done */
        if (dwc2_hsotg_wait_bit_clear(hsotg, GRSTCTL, GRSTCTL_RXFFLSH, 10000))
                dev_warn(hsotg->dev, "%s: HANG! timeout GRSTCTL GRSTCTL_RXFFLSH\n",
                         __func__);

        /* Wait for at least 3 PHY Clocks */
        udelay(1);
}

bool dwc2_is_controller_alive(struct dwc2_hsotg *hsotg)
{
        if (dwc2_readl(hsotg, GSNPSID) == 0xffffffff)
                return false;
        else
                return true;
}

/**
 * dwc2_enable_global_interrupts() - Enables the controller's Global
 * Interrupt in the AHB Config register
 *
 * @hsotg: Programming view of DWC_otg controller
 */
void dwc2_enable_global_interrupts(struct dwc2_hsotg *hsotg)
{
        u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);

        ahbcfg |= GAHBCFG_GLBL_INTR_EN;
        dwc2_writel(hsotg, ahbcfg, GAHBCFG);
}

/**
 * dwc2_disable_global_interrupts() - Disables the controller's Global
 * Interrupt in the AHB Config register
 *
 * @hsotg: Programming view of DWC_otg controller
 */
void dwc2_disable_global_interrupts(struct dwc2_hsotg *hsotg)
{
        u32 ahbcfg = dwc2_readl(hsotg, GAHBCFG);

        ahbcfg &= ~GAHBCFG_GLBL_INTR_EN;
        dwc2_writel(hsotg, ahbcfg, GAHBCFG);
}

/* Returns the controller's GHWCFG2.OTG_MODE. */
unsigned int dwc2_op_mode(struct dwc2_hsotg *hsotg)
{
        u32 ghwcfg2 = dwc2_readl(hsotg, GHWCFG2);

        return (ghwcfg2 & GHWCFG2_OP_MODE_MASK) >>
                GHWCFG2_OP_MODE_SHIFT;
}

/* Returns true if the controller is capable of DRD. */
bool dwc2_hw_is_otg(struct dwc2_hsotg *hsotg)
{
        unsigned int op_mode = dwc2_op_mode(hsotg);

        return (op_mode == GHWCFG2_OP_MODE_HNP_SRP_CAPABLE) ||
                (op_mode == GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE) ||
                (op_mode == GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE);
}

/* Returns true if the controller is host-only. */
bool dwc2_hw_is_host(struct dwc2_hsotg *hsotg)
{
        unsigned int op_mode = dwc2_op_mode(hsotg);

        return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_HOST) ||
                (op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST);
}

/* Returns true if the controller is device-only. */
bool dwc2_hw_is_device(struct dwc2_hsotg *hsotg)
{
        unsigned int op_mode = dwc2_op_mode(hsotg);

        return (op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE) ||
                (op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE);
}

/**
 * dwc2_hsotg_wait_bit_set - Waits for bit to be set.
 * @hsotg: Programming view of DWC_otg controller.
 * @offset: Register's offset where bit/bits must be set.
 * @mask: Mask of the bit/bits which must be set.
 * @timeout: Timeout to wait.
 *
 * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
 */
int dwc2_hsotg_wait_bit_set(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
                            u32 timeout)
{
        u32 i;

        for (i = 0; i < timeout; i++) {
                if (dwc2_readl(hsotg, offset) & mask)
                        return 0;
                udelay(1);
        }

        return -ETIMEDOUT;
}

/**
 * dwc2_hsotg_wait_bit_clear - Waits for bit to be clear.
 * @hsotg: Programming view of DWC_otg controller.
 * @offset: Register's offset where bit/bits must be set.
 * @mask: Mask of the bit/bits which must be set.
 * @timeout: Timeout to wait.
 *
 * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
 */
int dwc2_hsotg_wait_bit_clear(struct dwc2_hsotg *hsotg, u32 offset, u32 mask,
                              u32 timeout)
{
        u32 i;

        for (i = 0; i < timeout; i++) {
                if (!(dwc2_readl(hsotg, offset) & mask))
                        return 0;
                udelay(1);
        }

        return -ETIMEDOUT;
}

/*
 * Initializes the FSLSPClkSel field of the HCFG register depending on the
 * PHY type
 */
void dwc2_init_fs_ls_pclk_sel(struct dwc2_hsotg *hsotg)
{
        u32 hcfg, val;

        if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
             hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
             hsotg->params.ulpi_fs_ls) ||
            hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
                /* Full speed PHY */
                val = HCFG_FSLSPCLKSEL_48_MHZ;
        } else {
                /* High speed PHY running at full speed or high speed */
                val = HCFG_FSLSPCLKSEL_30_60_MHZ;
        }

        dev_dbg(hsotg->dev, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
        hcfg = dwc2_readl(hsotg, HCFG);
        hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
        hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
        dwc2_writel(hsotg, hcfg, HCFG);
}

static void dwc2_set_clock_switch_timer(struct dwc2_hsotg *hsotg)
{
        u32 grstctl, gsnpsid, val = 0;

        gsnpsid = dwc2_readl(hsotg, GSNPSID);

        /*
         * Applicable only to HSOTG core v5.00a or higher.
         * Not applicable to HS/FS IOT devices.
         */
        if ((gsnpsid & ~DWC2_CORE_REV_MASK) != DWC2_OTG_ID ||
            gsnpsid < DWC2_CORE_REV_5_00a)
                return;

        if ((hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_UTMI &&
             hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED) ||
            (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
             hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED) ||
            (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED &&
             hsotg->hw_params.fs_phy_type != GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED)) {
                val = GRSTCTL_CLOCK_SWITH_TIMER_VALUE_DIS;
        }

        if (hsotg->params.speed == DWC2_SPEED_PARAM_LOW &&
            hsotg->hw_params.hs_phy_type != GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED &&
            hsotg->hw_params.fs_phy_type != GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED) {
                val = GRSTCTL_CLOCK_SWITH_TIMER_VALUE_147;
        }

        grstctl = dwc2_readl(hsotg, GRSTCTL);
        grstctl &= ~GRSTCTL_CLOCK_SWITH_TIMER_MASK;
        grstctl |= GRSTCTL_CLOCK_SWITH_TIMER(val);
        dwc2_writel(hsotg, grstctl, GRSTCTL);
}

static int dwc2_fs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
{
        u32 usbcfg, ggpio, i2cctl;
        int retval = 0;

        /*
         * core_init() is now called on every switch so only call the
         * following for the first time through
         */
        if (select_phy) {
                dev_dbg(hsotg->dev, "FS PHY selected\n");

                usbcfg = dwc2_readl(hsotg, GUSBCFG);
                if (!(usbcfg & GUSBCFG_PHYSEL)) {
                        usbcfg |= GUSBCFG_PHYSEL;
                        dwc2_writel(hsotg, usbcfg, GUSBCFG);

                        dwc2_set_clock_switch_timer(hsotg);

                        /* Reset after a PHY select */
                        retval = dwc2_core_reset(hsotg, false);

                        if (retval) {
                                dev_err(hsotg->dev,
                                        "%s: Reset failed, aborting", __func__);
                                return retval;
                        }
                }

                if (hsotg->params.activate_stm_fs_transceiver) {
                        ggpio = dwc2_readl(hsotg, GGPIO);
                        if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) {
                                dev_dbg(hsotg->dev, "Activating transceiver\n");
                                /*
                                 * STM32F4x9 uses the GGPIO register as general
                                 * core configuration register.
                                 */
                                ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
                                dwc2_writel(hsotg, ggpio, GGPIO);
                        }
                }
        }

        /*
         * Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS. Also
         * do this on HNP Dev/Host mode switches (done in dev_init and
         * host_init).
         */
        if (dwc2_is_host_mode(hsotg))
                dwc2_init_fs_ls_pclk_sel(hsotg);

        if (hsotg->params.i2c_enable) {
                dev_dbg(hsotg->dev, "FS PHY enabling I2C\n");

                /* Program GUSBCFG.OtgUtmiFsSel to I2C */
                usbcfg = dwc2_readl(hsotg, GUSBCFG);
                usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
                dwc2_writel(hsotg, usbcfg, GUSBCFG);

                /* Program GI2CCTL.I2CEn */
                i2cctl = dwc2_readl(hsotg, GI2CCTL);
                i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
                i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
                i2cctl &= ~GI2CCTL_I2CEN;
                dwc2_writel(hsotg, i2cctl, GI2CCTL);
                i2cctl |= GI2CCTL_I2CEN;
                dwc2_writel(hsotg, i2cctl, GI2CCTL);
        }

        return retval;
}

static int dwc2_hs_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
{
        u32 usbcfg, usbcfg_old;
        int retval = 0;

        if (!select_phy)
                return 0;

        usbcfg = dwc2_readl(hsotg, GUSBCFG);
        usbcfg_old = usbcfg;

        /*
         * HS PHY parameters. These parameters are preserved during soft reset
         * so only program the first time. Do a soft reset immediately after
         * setting phyif.
         */
        switch (hsotg->params.phy_type) {
        case DWC2_PHY_TYPE_PARAM_ULPI:
                /* ULPI interface */
                dev_dbg(hsotg->dev, "HS ULPI PHY selected\n");
                usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
                usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL);
                if (hsotg->params.phy_ulpi_ddr)
                        usbcfg |= GUSBCFG_DDRSEL;

                /* Set external VBUS indicator as needed. */
                if (hsotg->params.oc_disable)
                        usbcfg |= (GUSBCFG_ULPI_INT_VBUS_IND |
                                   GUSBCFG_INDICATORPASSTHROUGH);
                break;
        case DWC2_PHY_TYPE_PARAM_UTMI:
                /* UTMI+ interface */
                dev_dbg(hsotg->dev, "HS UTMI+ PHY selected\n");
                usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
                if (hsotg->params.phy_utmi_width == 16)
                        usbcfg |= GUSBCFG_PHYIF16;
                break;
        default:
                dev_err(hsotg->dev, "FS PHY selected at HS!\n");
                break;
        }

        if (usbcfg != usbcfg_old) {
                dwc2_writel(hsotg, usbcfg, GUSBCFG);

                /* Reset after setting the PHY parameters */
                retval = dwc2_core_reset(hsotg, false);
                if (retval) {
                        dev_err(hsotg->dev,
                                "%s: Reset failed, aborting", __func__);
                        return retval;
                }
        }

        return retval;
}

static void dwc2_set_turnaround_time(struct dwc2_hsotg *hsotg)
{
        u32 usbcfg;

        if (hsotg->params.phy_type != DWC2_PHY_TYPE_PARAM_UTMI)
                return;

        usbcfg = dwc2_readl(hsotg, GUSBCFG);

        usbcfg &= ~GUSBCFG_USBTRDTIM_MASK;
        if (hsotg->params.phy_utmi_width == 16)
                usbcfg |= 5 << GUSBCFG_USBTRDTIM_SHIFT;
        else
                usbcfg |= 9 << GUSBCFG_USBTRDTIM_SHIFT;

        dwc2_writel(hsotg, usbcfg, GUSBCFG);
}

int dwc2_phy_init(struct dwc2_hsotg *hsotg, bool select_phy)
{
        u32 usbcfg;
        u32 otgctl;
        int retval = 0;

        if ((hsotg->params.speed == DWC2_SPEED_PARAM_FULL ||
             hsotg->params.speed == DWC2_SPEED_PARAM_LOW) &&
            hsotg->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
                /* If FS/LS mode with FS/LS PHY */
                retval = dwc2_fs_phy_init(hsotg, select_phy);
                if (retval)
                        return retval;
        } else {
                /* High speed PHY */
                retval = dwc2_hs_phy_init(hsotg, select_phy);
                if (retval)
                        return retval;

                if (dwc2_is_device_mode(hsotg))
                        dwc2_set_turnaround_time(hsotg);
        }

        if (hsotg->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
            hsotg->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
            hsotg->params.ulpi_fs_ls) {
                dev_dbg(hsotg->dev, "Setting ULPI FSLS\n");
                usbcfg = dwc2_readl(hsotg, GUSBCFG);
                usbcfg |= GUSBCFG_ULPI_FS_LS;
                usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
                dwc2_writel(hsotg, usbcfg, GUSBCFG);
        } else {
                usbcfg = dwc2_readl(hsotg, GUSBCFG);
                usbcfg &= ~GUSBCFG_ULPI_FS_LS;
                usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
                dwc2_writel(hsotg, usbcfg, GUSBCFG);
        }

        if (!hsotg->params.activate_ingenic_overcurrent_detection) {
                if (dwc2_is_host_mode(hsotg)) {
                        otgctl = readl(hsotg->regs + GOTGCTL);
                        otgctl |= GOTGCTL_VBVALOEN | GOTGCTL_VBVALOVAL;
                        writel(otgctl, hsotg->regs + GOTGCTL);
                }
        }

        return retval;
}

MODULE_DESCRIPTION("DESIGNWARE HS OTG Core");
MODULE_AUTHOR("Synopsys, Inc.");
MODULE_LICENSE("Dual BSD/GPL");