// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright 2016 Broadcom
 */

#include <linux/err.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/errno.h>
#include <linux/kernel.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/scatterlist.h>
#include <linux/crypto.h>
#include <linux/kthread.h>
#include <linux/rtnetlink.h>
#include <linux/sched.h>
#include <linux/string_choices.h>
#include <linux/of.h>
#include <linux/io.h>
#include <linux/bitops.h>

#include <crypto/algapi.h>
#include <crypto/aead.h>
#include <crypto/internal/aead.h>
#include <crypto/aes.h>
#include <crypto/internal/des.h>
#include <crypto/hmac.h>
#include <crypto/md5.h>
#include <crypto/authenc.h>
#include <crypto/skcipher.h>
#include <crypto/hash.h>
#include <crypto/sha1.h>
#include <crypto/sha2.h>
#include <crypto/sha3.h>

#include "util.h"
#include "cipher.h"
#include "spu.h"
#include "spum.h"
#include "spu2.h"

/* ================= Device Structure ================== */

struct bcm_device_private iproc_priv;

/* ==================== Parameters ===================== */

int flow_debug_logging;
module_param(flow_debug_logging, int, 0644);
MODULE_PARM_DESC(flow_debug_logging, "Enable Flow Debug Logging");

int packet_debug_logging;
module_param(packet_debug_logging, int, 0644);
MODULE_PARM_DESC(packet_debug_logging, "Enable Packet Debug Logging");

int debug_logging_sleep;
module_param(debug_logging_sleep, int, 0644);
MODULE_PARM_DESC(debug_logging_sleep, "Packet Debug Logging Sleep");

/*
 * The value of these module parameters is used to set the priority for each
 * algo type when this driver registers algos with the kernel crypto API.
 * To use a priority other than the default, set the priority in the insmod or
 * modprobe. Changing the module priority after init time has no effect.
 *
 * The default priorities are chosen to be lower (less preferred) than ARMv8 CE
 * algos, but more preferred than generic software algos.
 */
static int cipher_pri = 150;
module_param(cipher_pri, int, 0644);
MODULE_PARM_DESC(cipher_pri, "Priority for cipher algos");

static int hash_pri = 100;
module_param(hash_pri, int, 0644);
MODULE_PARM_DESC(hash_pri, "Priority for hash algos");

static int aead_pri = 150;
module_param(aead_pri, int, 0644);
MODULE_PARM_DESC(aead_pri, "Priority for AEAD algos");

/* A type 3 BCM header, expected to precede the SPU header for SPU-M.
 * Bits 3 and 4 in the first byte encode the channel number (the dma ringset).
 * 0x60 - ring 0
 * 0x68 - ring 1
 * 0x70 - ring 2
 * 0x78 - ring 3
 */
static char BCMHEADER[] = { 0x60, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x28 };
/*
 * Some SPU hw does not use BCM header on SPU messages. So BCM_HDR_LEN
 * is set dynamically after reading SPU type from device tree.
 */
#define BCM_HDR_LEN  iproc_priv.bcm_hdr_len

/* min and max time to sleep before retrying when mbox queue is full. usec */
#define MBOX_SLEEP_MIN  800
#define MBOX_SLEEP_MAX 1000

/**
 * select_channel() - Select a SPU channel to handle a crypto request. Selects
 * channel in round robin order.
 *
 * Return:  channel index
 */
static u8 select_channel(void)
{
        u8 chan_idx = atomic_inc_return(&iproc_priv.next_chan);

        return chan_idx % iproc_priv.spu.num_chan;
}

/**
 * spu_skcipher_rx_sg_create() - Build up the scatterlist of buffers used to
 * receive a SPU response message for an skcipher request. Includes buffers to
 * catch SPU message headers and the response data.
 * @mssg:       mailbox message containing the receive sg
 * @rctx:       crypto request context
 * @rx_frag_num: number of scatterlist elements required to hold the
 *              SPU response message
 * @chunksize:  Number of bytes of response data expected
 * @stat_pad_len: Number of bytes required to pad the STAT field to
 *              a 4-byte boundary
 *
 * The scatterlist that gets allocated here is freed in spu_chunk_cleanup()
 * when the request completes, whether the request is handled successfully or
 * there is an error.
 *
 * Returns:
 *   0 if successful
 *   < 0 if an error
 */
static int
spu_skcipher_rx_sg_create(struct brcm_message *mssg,
                            struct iproc_reqctx_s *rctx,
                            u8 rx_frag_num,
                            unsigned int chunksize, u32 stat_pad_len)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct scatterlist *sg; /* used to build sgs in mbox message */
        struct iproc_ctx_s *ctx = rctx->ctx;
        u32 datalen;            /* Number of bytes of response data expected */

        mssg->spu.dst = kmalloc_objs(struct scatterlist, rx_frag_num, rctx->gfp);
        if (!mssg->spu.dst)
                return -ENOMEM;

        sg = mssg->spu.dst;
        sg_init_table(sg, rx_frag_num);
        /* Space for SPU message header */
        sg_set_buf(sg++, rctx->msg_buf.spu_resp_hdr, ctx->spu_resp_hdr_len);

        /* If XTS tweak in payload, add buffer to receive encrypted tweak */
        if ((ctx->cipher.mode == CIPHER_MODE_XTS) &&
            spu->spu_xts_tweak_in_payload())
                sg_set_buf(sg++, rctx->msg_buf.c.supdt_tweak,
                           SPU_XTS_TWEAK_SIZE);

        /* Copy in each dst sg entry from request, up to chunksize */
        datalen = spu_msg_sg_add(&sg, &rctx->dst_sg, &rctx->dst_skip,
                                 rctx->dst_nents, chunksize);
        if (datalen < chunksize) {
                pr_err("%s(): failed to copy dst sg to mbox msg. chunksize %u, datalen %u",
                       __func__, chunksize, datalen);
                return -EFAULT;
        }

        if (stat_pad_len)
                sg_set_buf(sg++, rctx->msg_buf.rx_stat_pad, stat_pad_len);

        memset(rctx->msg_buf.rx_stat, 0, SPU_RX_STATUS_LEN);
        sg_set_buf(sg, rctx->msg_buf.rx_stat, spu->spu_rx_status_len());

        return 0;
}

/**
 * spu_skcipher_tx_sg_create() - Build up the scatterlist of buffers used to
 * send a SPU request message for an skcipher request. Includes SPU message
 * headers and the request data.
 * @mssg:       mailbox message containing the transmit sg
 * @rctx:       crypto request context
 * @tx_frag_num: number of scatterlist elements required to construct the
 *              SPU request message
 * @chunksize:  Number of bytes of request data
 * @pad_len:    Number of pad bytes
 *
 * The scatterlist that gets allocated here is freed in spu_chunk_cleanup()
 * when the request completes, whether the request is handled successfully or
 * there is an error.
 *
 * Returns:
 *   0 if successful
 *   < 0 if an error
 */
static int
spu_skcipher_tx_sg_create(struct brcm_message *mssg,
                            struct iproc_reqctx_s *rctx,
                            u8 tx_frag_num, unsigned int chunksize, u32 pad_len)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct scatterlist *sg; /* used to build sgs in mbox message */
        struct iproc_ctx_s *ctx = rctx->ctx;
        u32 datalen;            /* Number of bytes of response data expected */
        u32 stat_len;

        mssg->spu.src = kmalloc_objs(struct scatterlist, tx_frag_num, rctx->gfp);
        if (unlikely(!mssg->spu.src))
                return -ENOMEM;

        sg = mssg->spu.src;
        sg_init_table(sg, tx_frag_num);

        sg_set_buf(sg++, rctx->msg_buf.bcm_spu_req_hdr,
                   BCM_HDR_LEN + ctx->spu_req_hdr_len);

        /* if XTS tweak in payload, copy from IV (where crypto API puts it) */
        if ((ctx->cipher.mode == CIPHER_MODE_XTS) &&
            spu->spu_xts_tweak_in_payload())
                sg_set_buf(sg++, rctx->msg_buf.iv_ctr, SPU_XTS_TWEAK_SIZE);

        /* Copy in each src sg entry from request, up to chunksize */
        datalen = spu_msg_sg_add(&sg, &rctx->src_sg, &rctx->src_skip,
                                 rctx->src_nents, chunksize);
        if (unlikely(datalen < chunksize)) {
                pr_err("%s(): failed to copy src sg to mbox msg",
                       __func__);
                return -EFAULT;
        }

        if (pad_len)
                sg_set_buf(sg++, rctx->msg_buf.spu_req_pad, pad_len);

        stat_len = spu->spu_tx_status_len();
        if (stat_len) {
                memset(rctx->msg_buf.tx_stat, 0, stat_len);
                sg_set_buf(sg, rctx->msg_buf.tx_stat, stat_len);
        }
        return 0;
}

static int mailbox_send_message(struct brcm_message *mssg, u32 flags,
                                u8 chan_idx)
{
        int err;
        int retry_cnt = 0;
        struct device *dev = &(iproc_priv.pdev->dev);

        err = mbox_send_message(iproc_priv.mbox[chan_idx], mssg);
        if (flags & CRYPTO_TFM_REQ_MAY_SLEEP) {
                while ((err == -ENOBUFS) && (retry_cnt < SPU_MB_RETRY_MAX)) {
                        /*
                         * Mailbox queue is full. Since MAY_SLEEP is set, assume
                         * not in atomic context and we can wait and try again.
                         */
                        retry_cnt++;
                        usleep_range(MBOX_SLEEP_MIN, MBOX_SLEEP_MAX);
                        err = mbox_send_message(iproc_priv.mbox[chan_idx],
                                                mssg);
                        atomic_inc(&iproc_priv.mb_no_spc);
                }
        }
        if (err < 0) {
                atomic_inc(&iproc_priv.mb_send_fail);
                return err;
        }

        /* Check error returned by mailbox controller */
        err = mssg->error;
        if (unlikely(err < 0)) {
                dev_err(dev, "message error %d", err);
                /* Signal txdone for mailbox channel */
        }

        /* Signal txdone for mailbox channel */
        mbox_client_txdone(iproc_priv.mbox[chan_idx], err);
        return err;
}

/**
 * handle_skcipher_req() - Submit as much of a block cipher request as fits in
 * a single SPU request message, starting at the current position in the request
 * data.
 * @rctx:       Crypto request context
 *
 * This may be called on the crypto API thread, or, when a request is so large
 * it must be broken into multiple SPU messages, on the thread used to invoke
 * the response callback. When requests are broken into multiple SPU
 * messages, we assume subsequent messages depend on previous results, and
 * thus always wait for previous results before submitting the next message.
 * Because requests are submitted in lock step like this, there is no need
 * to synchronize access to request data structures.
 *
 * Return: -EINPROGRESS: request has been accepted and result will be returned
 *                       asynchronously
 *         Any other value indicates an error
 */
static int handle_skcipher_req(struct iproc_reqctx_s *rctx)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct crypto_async_request *areq = rctx->parent;
        struct skcipher_request *req =
            container_of(areq, struct skcipher_request, base);
        struct iproc_ctx_s *ctx = rctx->ctx;
        struct spu_cipher_parms cipher_parms;
        int err;
        unsigned int chunksize; /* Num bytes of request to submit */
        int remaining;  /* Bytes of request still to process */
        int chunk_start;        /* Beginning of data for current SPU msg */

        /* IV or ctr value to use in this SPU msg */
        u8 local_iv_ctr[MAX_IV_SIZE];
        u32 stat_pad_len;       /* num bytes to align status field */
        u32 pad_len;            /* total length of all padding */
        struct brcm_message *mssg;      /* mailbox message */

        /* number of entries in src and dst sg in mailbox message. */
        u8 rx_frag_num = 2;     /* response header and STATUS */
        u8 tx_frag_num = 1;     /* request header */

        flow_log("%s\n", __func__);

        cipher_parms.alg = ctx->cipher.alg;
        cipher_parms.mode = ctx->cipher.mode;
        cipher_parms.type = ctx->cipher_type;
        cipher_parms.key_len = ctx->enckeylen;
        cipher_parms.key_buf = ctx->enckey;
        cipher_parms.iv_buf = local_iv_ctr;
        cipher_parms.iv_len = rctx->iv_ctr_len;

        mssg = &rctx->mb_mssg;
        chunk_start = rctx->src_sent;
        remaining = rctx->total_todo - chunk_start;

        /* determine the chunk we are breaking off and update the indexes */
        if ((ctx->max_payload != SPU_MAX_PAYLOAD_INF) &&
            (remaining > ctx->max_payload))
                chunksize = ctx->max_payload;
        else
                chunksize = remaining;

        rctx->src_sent += chunksize;
        rctx->total_sent = rctx->src_sent;

        /* Count number of sg entries to be included in this request */
        rctx->src_nents = spu_sg_count(rctx->src_sg, rctx->src_skip, chunksize);
        rctx->dst_nents = spu_sg_count(rctx->dst_sg, rctx->dst_skip, chunksize);

        if ((ctx->cipher.mode == CIPHER_MODE_CBC) &&
            rctx->is_encrypt && chunk_start)
                /*
                 * Encrypting non-first first chunk. Copy last block of
                 * previous result to IV for this chunk.
                 */
                sg_copy_part_to_buf(req->dst, rctx->msg_buf.iv_ctr,
                                    rctx->iv_ctr_len,
                                    chunk_start - rctx->iv_ctr_len);

        if (rctx->iv_ctr_len) {
                /* get our local copy of the iv */
                __builtin_memcpy(local_iv_ctr, rctx->msg_buf.iv_ctr,
                                 rctx->iv_ctr_len);

                /* generate the next IV if possible */
                if ((ctx->cipher.mode == CIPHER_MODE_CBC) &&
                    !rctx->is_encrypt) {
                        /*
                         * CBC Decrypt: next IV is the last ciphertext block in
                         * this chunk
                         */
                        sg_copy_part_to_buf(req->src, rctx->msg_buf.iv_ctr,
                                            rctx->iv_ctr_len,
                                            rctx->src_sent - rctx->iv_ctr_len);
                } else if (ctx->cipher.mode == CIPHER_MODE_CTR) {
                        /*
                         * The SPU hardware increments the counter once for
                         * each AES block of 16 bytes. So update the counter
                         * for the next chunk, if there is one. Note that for
                         * this chunk, the counter has already been copied to
                         * local_iv_ctr. We can assume a block size of 16,
                         * because we only support CTR mode for AES, not for
                         * any other cipher alg.
                         */
                        add_to_ctr(rctx->msg_buf.iv_ctr, chunksize >> 4);
                }
        }

        if (ctx->max_payload == SPU_MAX_PAYLOAD_INF)
                flow_log("max_payload infinite\n");
        else
                flow_log("max_payload %u\n", ctx->max_payload);

        flow_log("sent:%u start:%u remains:%u size:%u\n",
                 rctx->src_sent, chunk_start, remaining, chunksize);

        /* Copy SPU header template created at setkey time */
        memcpy(rctx->msg_buf.bcm_spu_req_hdr, ctx->bcm_spu_req_hdr,
               sizeof(rctx->msg_buf.bcm_spu_req_hdr));

        spu->spu_cipher_req_finish(rctx->msg_buf.bcm_spu_req_hdr + BCM_HDR_LEN,
                                   ctx->spu_req_hdr_len, !(rctx->is_encrypt),
                                   &cipher_parms, chunksize);

        atomic64_add(chunksize, &iproc_priv.bytes_out);

        stat_pad_len = spu->spu_wordalign_padlen(chunksize);
        if (stat_pad_len)
                rx_frag_num++;
        pad_len = stat_pad_len;
        if (pad_len) {
                tx_frag_num++;
                spu->spu_request_pad(rctx->msg_buf.spu_req_pad, 0,
                                     0, ctx->auth.alg, ctx->auth.mode,
                                     rctx->total_sent, stat_pad_len);
        }

        spu->spu_dump_msg_hdr(rctx->msg_buf.bcm_spu_req_hdr + BCM_HDR_LEN,
                              ctx->spu_req_hdr_len);
        packet_log("payload:\n");
        dump_sg(rctx->src_sg, rctx->src_skip, chunksize);
        packet_dump("   pad: ", rctx->msg_buf.spu_req_pad, pad_len);

        /*
         * Build mailbox message containing SPU request msg and rx buffers
         * to catch response message
         */
        memset(mssg, 0, sizeof(*mssg));
        mssg->type = BRCM_MESSAGE_SPU;
        mssg->ctx = rctx;       /* Will be returned in response */

        /* Create rx scatterlist to catch result */
        rx_frag_num += rctx->dst_nents;

        if ((ctx->cipher.mode == CIPHER_MODE_XTS) &&
            spu->spu_xts_tweak_in_payload())
                rx_frag_num++;  /* extra sg to insert tweak */

        err = spu_skcipher_rx_sg_create(mssg, rctx, rx_frag_num, chunksize,
                                          stat_pad_len);
        if (err)
                return err;

        /* Create tx scatterlist containing SPU request message */
        tx_frag_num += rctx->src_nents;
        if (spu->spu_tx_status_len())
                tx_frag_num++;

        if ((ctx->cipher.mode == CIPHER_MODE_XTS) &&
            spu->spu_xts_tweak_in_payload())
                tx_frag_num++;  /* extra sg to insert tweak */

        err = spu_skcipher_tx_sg_create(mssg, rctx, tx_frag_num, chunksize,
                                          pad_len);
        if (err)
                return err;

        err = mailbox_send_message(mssg, req->base.flags, rctx->chan_idx);
        if (unlikely(err < 0))
                return err;

        return -EINPROGRESS;
}

/**
 * handle_skcipher_resp() - Process a block cipher SPU response. Updates the
 * total received count for the request and updates global stats.
 * @rctx:       Crypto request context
 */
static void handle_skcipher_resp(struct iproc_reqctx_s *rctx)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct crypto_async_request *areq = rctx->parent;
        struct skcipher_request *req = skcipher_request_cast(areq);
        struct iproc_ctx_s *ctx = rctx->ctx;
        u32 payload_len;

        /* See how much data was returned */
        payload_len = spu->spu_payload_length(rctx->msg_buf.spu_resp_hdr);

        /*
         * In XTS mode, the first SPU_XTS_TWEAK_SIZE bytes may be the
         * encrypted tweak ("i") value; we don't count those.
         */
        if ((ctx->cipher.mode == CIPHER_MODE_XTS) &&
            spu->spu_xts_tweak_in_payload() &&
            (payload_len >= SPU_XTS_TWEAK_SIZE))
                payload_len -= SPU_XTS_TWEAK_SIZE;

        atomic64_add(payload_len, &iproc_priv.bytes_in);

        flow_log("%s() offset: %u, bd_len: %u BD:\n",
                 __func__, rctx->total_received, payload_len);

        dump_sg(req->dst, rctx->total_received, payload_len);

        rctx->total_received += payload_len;
        if (rctx->total_received == rctx->total_todo) {
                atomic_inc(&iproc_priv.op_counts[SPU_OP_CIPHER]);
                atomic_inc(
                   &iproc_priv.cipher_cnt[ctx->cipher.alg][ctx->cipher.mode]);
        }
}

/**
 * spu_ahash_rx_sg_create() - Build up the scatterlist of buffers used to
 * receive a SPU response message for an ahash request.
 * @mssg:       mailbox message containing the receive sg
 * @rctx:       crypto request context
 * @rx_frag_num: number of scatterlist elements required to hold the
 *              SPU response message
 * @digestsize: length of hash digest, in bytes
 * @stat_pad_len: Number of bytes required to pad the STAT field to
 *              a 4-byte boundary
 *
 * The scatterlist that gets allocated here is freed in spu_chunk_cleanup()
 * when the request completes, whether the request is handled successfully or
 * there is an error.
 *
 * Return:
 *   0 if successful
 *   < 0 if an error
 */
static int
spu_ahash_rx_sg_create(struct brcm_message *mssg,
                       struct iproc_reqctx_s *rctx,
                       u8 rx_frag_num, unsigned int digestsize,
                       u32 stat_pad_len)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct scatterlist *sg; /* used to build sgs in mbox message */
        struct iproc_ctx_s *ctx = rctx->ctx;

        mssg->spu.dst = kmalloc_objs(struct scatterlist, rx_frag_num, rctx->gfp);
        if (!mssg->spu.dst)
                return -ENOMEM;

        sg = mssg->spu.dst;
        sg_init_table(sg, rx_frag_num);
        /* Space for SPU message header */
        sg_set_buf(sg++, rctx->msg_buf.spu_resp_hdr, ctx->spu_resp_hdr_len);

        /* Space for digest */
        sg_set_buf(sg++, rctx->msg_buf.digest, digestsize);

        if (stat_pad_len)
                sg_set_buf(sg++, rctx->msg_buf.rx_stat_pad, stat_pad_len);

        memset(rctx->msg_buf.rx_stat, 0, SPU_RX_STATUS_LEN);
        sg_set_buf(sg, rctx->msg_buf.rx_stat, spu->spu_rx_status_len());
        return 0;
}

/**
 * spu_ahash_tx_sg_create() -  Build up the scatterlist of buffers used to send
 * a SPU request message for an ahash request. Includes SPU message headers and
 * the request data.
 * @mssg:       mailbox message containing the transmit sg
 * @rctx:       crypto request context
 * @tx_frag_num: number of scatterlist elements required to construct the
 *              SPU request message
 * @spu_hdr_len: length in bytes of SPU message header
 * @hash_carry_len: Number of bytes of data carried over from previous req
 * @new_data_len: Number of bytes of new request data
 * @pad_len:    Number of pad bytes
 *
 * The scatterlist that gets allocated here is freed in spu_chunk_cleanup()
 * when the request completes, whether the request is handled successfully or
 * there is an error.
 *
 * Return:
 *   0 if successful
 *   < 0 if an error
 */
static int
spu_ahash_tx_sg_create(struct brcm_message *mssg,
                       struct iproc_reqctx_s *rctx,
                       u8 tx_frag_num,
                       u32 spu_hdr_len,
                       unsigned int hash_carry_len,
                       unsigned int new_data_len, u32 pad_len)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct scatterlist *sg; /* used to build sgs in mbox message */
        u32 datalen;            /* Number of bytes of response data expected */
        u32 stat_len;

        mssg->spu.src = kmalloc_objs(struct scatterlist, tx_frag_num, rctx->gfp);
        if (!mssg->spu.src)
                return -ENOMEM;

        sg = mssg->spu.src;
        sg_init_table(sg, tx_frag_num);

        sg_set_buf(sg++, rctx->msg_buf.bcm_spu_req_hdr,
                   BCM_HDR_LEN + spu_hdr_len);

        if (hash_carry_len)
                sg_set_buf(sg++, rctx->hash_carry, hash_carry_len);

        if (new_data_len) {
                /* Copy in each src sg entry from request, up to chunksize */
                datalen = spu_msg_sg_add(&sg, &rctx->src_sg, &rctx->src_skip,
                                         rctx->src_nents, new_data_len);
                if (datalen < new_data_len) {
                        pr_err("%s(): failed to copy src sg to mbox msg",
                               __func__);
                        return -EFAULT;
                }
        }

        if (pad_len)
                sg_set_buf(sg++, rctx->msg_buf.spu_req_pad, pad_len);

        stat_len = spu->spu_tx_status_len();
        if (stat_len) {
                memset(rctx->msg_buf.tx_stat, 0, stat_len);
                sg_set_buf(sg, rctx->msg_buf.tx_stat, stat_len);
        }

        return 0;
}

/**
 * handle_ahash_req() - Process an asynchronous hash request from the crypto
 * API.
 * @rctx:  Crypto request context
 *
 * Builds a SPU request message embedded in a mailbox message and submits the
 * mailbox message on a selected mailbox channel. The SPU request message is
 * constructed as a scatterlist, including entries from the crypto API's
 * src scatterlist to avoid copying the data to be hashed. This function is
 * called either on the thread from the crypto API, or, in the case that the
 * crypto API request is too large to fit in a single SPU request message,
 * on the thread that invokes the receive callback with a response message.
 * Because some operations require the response from one chunk before the next
 * chunk can be submitted, we always wait for the response for the previous
 * chunk before submitting the next chunk. Because requests are submitted in
 * lock step like this, there is no need to synchronize access to request data
 * structures.
 *
 * Return:
 *   -EINPROGRESS: request has been submitted to SPU and response will be
 *                 returned asynchronously
 *   -EAGAIN:      non-final request included a small amount of data, which for
 *                 efficiency we did not submit to the SPU, but instead stored
 *                 to be submitted to the SPU with the next part of the request
 *   other:        an error code
 */
static int handle_ahash_req(struct iproc_reqctx_s *rctx)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct crypto_async_request *areq = rctx->parent;
        struct ahash_request *req = ahash_request_cast(areq);
        struct crypto_ahash *ahash = crypto_ahash_reqtfm(req);
        struct crypto_tfm *tfm = crypto_ahash_tfm(ahash);
        unsigned int blocksize = crypto_tfm_alg_blocksize(tfm);
        struct iproc_ctx_s *ctx = rctx->ctx;

        /* number of bytes still to be hashed in this req */
        unsigned int nbytes_to_hash = 0;
        int err;
        unsigned int chunksize = 0;     /* length of hash carry + new data */
        /*
         * length of new data, not from hash carry, to be submitted in
         * this hw request
         */
        unsigned int new_data_len;

        unsigned int __maybe_unused chunk_start = 0;
        u32 db_size;     /* Length of data field, incl gcm and hash padding */
        int pad_len = 0; /* total pad len, including gcm, hash, stat padding */
        u32 data_pad_len = 0;   /* length of GCM/CCM padding */
        u32 stat_pad_len = 0;   /* length of padding to align STATUS word */
        struct brcm_message *mssg;      /* mailbox message */
        struct spu_request_opts req_opts;
        struct spu_cipher_parms cipher_parms;
        struct spu_hash_parms hash_parms;
        struct spu_aead_parms aead_parms;
        unsigned int local_nbuf;
        u32 spu_hdr_len;
        unsigned int digestsize;
        u16 rem = 0;

        /*
         * number of entries in src and dst sg. Always includes SPU msg header.
         * rx always includes a buffer to catch digest and STATUS.
         */
        u8 rx_frag_num = 3;
        u8 tx_frag_num = 1;

        flow_log("total_todo %u, total_sent %u\n",
                 rctx->total_todo, rctx->total_sent);

        memset(&req_opts, 0, sizeof(req_opts));
        memset(&cipher_parms, 0, sizeof(cipher_parms));
        memset(&hash_parms, 0, sizeof(hash_parms));
        memset(&aead_parms, 0, sizeof(aead_parms));

        req_opts.bd_suppress = true;
        hash_parms.alg = ctx->auth.alg;
        hash_parms.mode = ctx->auth.mode;
        hash_parms.type = HASH_TYPE_NONE;
        hash_parms.key_buf = (u8 *)ctx->authkey;
        hash_parms.key_len = ctx->authkeylen;

        /*
         * For hash algorithms below assignment looks bit odd but
         * it's needed for AES-XCBC and AES-CMAC hash algorithms
         * to differentiate between 128, 192, 256 bit key values.
         * Based on the key values, hash algorithm is selected.
         * For example for 128 bit key, hash algorithm is AES-128.
         */
        cipher_parms.type = ctx->cipher_type;

        mssg = &rctx->mb_mssg;
        chunk_start = rctx->src_sent;

        /*
         * Compute the amount remaining to hash. This may include data
         * carried over from previous requests.
         */
        nbytes_to_hash = rctx->total_todo - rctx->total_sent;
        chunksize = nbytes_to_hash;
        if ((ctx->max_payload != SPU_MAX_PAYLOAD_INF) &&
            (chunksize > ctx->max_payload))
                chunksize = ctx->max_payload;

        /*
         * If this is not a final request and the request data is not a multiple
         * of a full block, then simply park the extra data and prefix it to the
         * data for the next request.
         */
        if (!rctx->is_final) {
                u8 *dest = rctx->hash_carry + rctx->hash_carry_len;
                u16 new_len;  /* len of data to add to hash carry */

                rem = chunksize % blocksize;   /* remainder */
                if (rem) {
                        /* chunksize not a multiple of blocksize */
                        chunksize -= rem;
                        if (chunksize == 0) {
                                /* Don't have a full block to submit to hw */
                                new_len = rem - rctx->hash_carry_len;
                                sg_copy_part_to_buf(req->src, dest, new_len,
                                                    rctx->src_sent);
                                rctx->hash_carry_len = rem;
                                flow_log("Exiting with hash carry len: %u\n",
                                         rctx->hash_carry_len);
                                packet_dump("  buf: ",
                                            rctx->hash_carry,
                                            rctx->hash_carry_len);
                                return -EAGAIN;
                        }
                }
        }

        /* if we have hash carry, then prefix it to the data in this request */
        local_nbuf = rctx->hash_carry_len;
        rctx->hash_carry_len = 0;
        if (local_nbuf)
                tx_frag_num++;
        new_data_len = chunksize - local_nbuf;

        /* Count number of sg entries to be used in this request */
        rctx->src_nents = spu_sg_count(rctx->src_sg, rctx->src_skip,
                                       new_data_len);

        /* AES hashing keeps key size in type field, so need to copy it here */
        if (hash_parms.alg == HASH_ALG_AES)
                hash_parms.type = (enum hash_type)cipher_parms.type;
        else
                hash_parms.type = spu->spu_hash_type(rctx->total_sent);

        digestsize = spu->spu_digest_size(ctx->digestsize, ctx->auth.alg,
                                          hash_parms.type);
        hash_parms.digestsize = digestsize;

        /* update the indexes */
        rctx->total_sent += chunksize;
        /* if you sent a prebuf then that wasn't from this req->src */
        rctx->src_sent += new_data_len;

        if ((rctx->total_sent == rctx->total_todo) && rctx->is_final)
                hash_parms.pad_len = spu->spu_hash_pad_len(hash_parms.alg,
                                                           hash_parms.mode,
                                                           chunksize,
                                                           blocksize);

        /*
         * If a non-first chunk, then include the digest returned from the
         * previous chunk so that hw can add to it (except for AES types).
         */
        if ((hash_parms.type == HASH_TYPE_UPDT) &&
            (hash_parms.alg != HASH_ALG_AES)) {
                hash_parms.key_buf = rctx->incr_hash;
                hash_parms.key_len = digestsize;
        }

        atomic64_add(chunksize, &iproc_priv.bytes_out);

        flow_log("%s() final: %u nbuf: %u ",
                 __func__, rctx->is_final, local_nbuf);

        if (ctx->max_payload == SPU_MAX_PAYLOAD_INF)
                flow_log("max_payload infinite\n");
        else
                flow_log("max_payload %u\n", ctx->max_payload);

        flow_log("chunk_start: %u chunk_size: %u\n", chunk_start, chunksize);

        /* Prepend SPU header with type 3 BCM header */
        memcpy(rctx->msg_buf.bcm_spu_req_hdr, BCMHEADER, BCM_HDR_LEN);

        hash_parms.prebuf_len = local_nbuf;
        spu_hdr_len = spu->spu_create_request(rctx->msg_buf.bcm_spu_req_hdr +
                                              BCM_HDR_LEN,
                                              &req_opts, &cipher_parms,
                                              &hash_parms, &aead_parms,
                                              new_data_len);

        if (spu_hdr_len == 0) {
                pr_err("Failed to create SPU request header\n");
                return -EFAULT;
        }

        /*
         * Determine total length of padding required. Put all padding in one
         * buffer.
         */
        data_pad_len = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode, chunksize);
        db_size = spu_real_db_size(0, 0, local_nbuf, new_data_len,
                                   0, 0, hash_parms.pad_len);
        if (spu->spu_tx_status_len())
                stat_pad_len = spu->spu_wordalign_padlen(db_size);
        if (stat_pad_len)
                rx_frag_num++;
        pad_len = hash_parms.pad_len + data_pad_len + stat_pad_len;
        if (pad_len) {
                tx_frag_num++;
                spu->spu_request_pad(rctx->msg_buf.spu_req_pad, data_pad_len,
                                     hash_parms.pad_len, ctx->auth.alg,
                                     ctx->auth.mode, rctx->total_sent,
                                     stat_pad_len);
        }

        spu->spu_dump_msg_hdr(rctx->msg_buf.bcm_spu_req_hdr + BCM_HDR_LEN,
                              spu_hdr_len);
        packet_dump("    prebuf: ", rctx->hash_carry, local_nbuf);
        flow_log("Data:\n");
        dump_sg(rctx->src_sg, rctx->src_skip, new_data_len);
        packet_dump("   pad: ", rctx->msg_buf.spu_req_pad, pad_len);

        /*
         * Build mailbox message containing SPU request msg and rx buffers
         * to catch response message
         */
        memset(mssg, 0, sizeof(*mssg));
        mssg->type = BRCM_MESSAGE_SPU;
        mssg->ctx = rctx;       /* Will be returned in response */

        /* Create rx scatterlist to catch result */
        err = spu_ahash_rx_sg_create(mssg, rctx, rx_frag_num, digestsize,
                                     stat_pad_len);
        if (err)
                return err;

        /* Create tx scatterlist containing SPU request message */
        tx_frag_num += rctx->src_nents;
        if (spu->spu_tx_status_len())
                tx_frag_num++;
        err = spu_ahash_tx_sg_create(mssg, rctx, tx_frag_num, spu_hdr_len,
                                     local_nbuf, new_data_len, pad_len);
        if (err)
                return err;

        err = mailbox_send_message(mssg, req->base.flags, rctx->chan_idx);
        if (unlikely(err < 0))
                return err;

        return -EINPROGRESS;
}

/**
 * spu_hmac_outer_hash() - Request synchonous software compute of the outer hash
 * for an HMAC request.
 * @req:  The HMAC request from the crypto API
 * @ctx:  The session context
 *
 * Return: 0 if synchronous hash operation successful
 *         -EINVAL if the hash algo is unrecognized
 *         any other value indicates an error
 */
static int spu_hmac_outer_hash(struct ahash_request *req,
                               struct iproc_ctx_s *ctx)
{
        struct crypto_ahash *ahash = crypto_ahash_reqtfm(req);
        unsigned int blocksize =
                crypto_tfm_alg_blocksize(crypto_ahash_tfm(ahash));
        int rc;

        switch (ctx->auth.alg) {
        case HASH_ALG_MD5:
                rc = do_shash("md5", req->result, ctx->opad, blocksize,
                              req->result, ctx->digestsize, NULL, 0);
                break;
        case HASH_ALG_SHA1:
                rc = do_shash("sha1", req->result, ctx->opad, blocksize,
                              req->result, ctx->digestsize, NULL, 0);
                break;
        case HASH_ALG_SHA224:
                rc = do_shash("sha224", req->result, ctx->opad, blocksize,
                              req->result, ctx->digestsize, NULL, 0);
                break;
        case HASH_ALG_SHA256:
                rc = do_shash("sha256", req->result, ctx->opad, blocksize,
                              req->result, ctx->digestsize, NULL, 0);
                break;
        case HASH_ALG_SHA384:
                rc = do_shash("sha384", req->result, ctx->opad, blocksize,
                              req->result, ctx->digestsize, NULL, 0);
                break;
        case HASH_ALG_SHA512:
                rc = do_shash("sha512", req->result, ctx->opad, blocksize,
                              req->result, ctx->digestsize, NULL, 0);
                break;
        default:
                pr_err("%s() Error : unknown hmac type\n", __func__);
                rc = -EINVAL;
        }
        return rc;
}

/**
 * ahash_req_done() - Process a hash result from the SPU hardware.
 * @rctx: Crypto request context
 *
 * Return: 0 if successful
 *         < 0 if an error
 */
static int ahash_req_done(struct iproc_reqctx_s *rctx)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct crypto_async_request *areq = rctx->parent;
        struct ahash_request *req = ahash_request_cast(areq);
        struct iproc_ctx_s *ctx = rctx->ctx;
        int err;

        memcpy(req->result, rctx->msg_buf.digest, ctx->digestsize);

        if (spu->spu_type == SPU_TYPE_SPUM) {
                /* byte swap the output from the UPDT function to network byte
                 * order
                 */
                if (ctx->auth.alg == HASH_ALG_MD5) {
                        __swab32s((u32 *)req->result);
                        __swab32s(((u32 *)req->result) + 1);
                        __swab32s(((u32 *)req->result) + 2);
                        __swab32s(((u32 *)req->result) + 3);
                        __swab32s(((u32 *)req->result) + 4);
                }
        }

        flow_dump("  digest ", req->result, ctx->digestsize);

        /* if this an HMAC then do the outer hash */
        if (rctx->is_sw_hmac) {
                err = spu_hmac_outer_hash(req, ctx);
                if (err < 0)
                        return err;
                flow_dump("  hmac: ", req->result, ctx->digestsize);
        }

        if (rctx->is_sw_hmac || ctx->auth.mode == HASH_MODE_HMAC) {
                atomic_inc(&iproc_priv.op_counts[SPU_OP_HMAC]);
                atomic_inc(&iproc_priv.hmac_cnt[ctx->auth.alg]);
        } else {
                atomic_inc(&iproc_priv.op_counts[SPU_OP_HASH]);
                atomic_inc(&iproc_priv.hash_cnt[ctx->auth.alg]);
        }

        return 0;
}

/**
 * handle_ahash_resp() - Process a SPU response message for a hash request.
 * Checks if the entire crypto API request has been processed, and if so,
 * invokes post processing on the result.
 * @rctx: Crypto request context
 */
static void handle_ahash_resp(struct iproc_reqctx_s *rctx)
{
        struct iproc_ctx_s *ctx = rctx->ctx;
        struct crypto_async_request *areq = rctx->parent;
        struct ahash_request *req = ahash_request_cast(areq);
        struct crypto_ahash *ahash = crypto_ahash_reqtfm(req);
        unsigned int blocksize =
                crypto_tfm_alg_blocksize(crypto_ahash_tfm(ahash));
        /*
         * Save hash to use as input to next op if incremental. Might be copying
         * too much, but that's easier than figuring out actual digest size here
         */
        memcpy(rctx->incr_hash, rctx->msg_buf.digest, MAX_DIGEST_SIZE);

        flow_log("%s() blocksize:%u digestsize:%u\n",
                 __func__, blocksize, ctx->digestsize);

        atomic64_add(ctx->digestsize, &iproc_priv.bytes_in);

        if (rctx->is_final && (rctx->total_sent == rctx->total_todo))
                ahash_req_done(rctx);
}

/**
 * spu_aead_rx_sg_create() - Build up the scatterlist of buffers used to receive
 * a SPU response message for an AEAD request. Includes buffers to catch SPU
 * message headers and the response data.
 * @mssg:       mailbox message containing the receive sg
 * @req:        Crypto API request
 * @rctx:       crypto request context
 * @rx_frag_num: number of scatterlist elements required to hold the
 *              SPU response message
 * @assoc_len:  Length of associated data included in the crypto request
 * @ret_iv_len: Length of IV returned in response
 * @resp_len:   Number of bytes of response data expected to be written to
 *              dst buffer from crypto API
 * @digestsize: Length of hash digest, in bytes
 * @stat_pad_len: Number of bytes required to pad the STAT field to
 *              a 4-byte boundary
 *
 * The scatterlist that gets allocated here is freed in spu_chunk_cleanup()
 * when the request completes, whether the request is handled successfully or
 * there is an error.
 *
 * Returns:
 *   0 if successful
 *   < 0 if an error
 */
static int spu_aead_rx_sg_create(struct brcm_message *mssg,
                                 struct aead_request *req,
                                 struct iproc_reqctx_s *rctx,
                                 u8 rx_frag_num,
                                 unsigned int assoc_len,
                                 u32 ret_iv_len, unsigned int resp_len,
                                 unsigned int digestsize, u32 stat_pad_len)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct scatterlist *sg; /* used to build sgs in mbox message */
        struct iproc_ctx_s *ctx = rctx->ctx;
        u32 datalen;            /* Number of bytes of response data expected */
        u32 assoc_buf_len;
        u8 data_padlen = 0;

        if (ctx->is_rfc4543) {
                /* RFC4543: only pad after data, not after AAD */
                data_padlen = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode,
                                                          assoc_len + resp_len);
                assoc_buf_len = assoc_len;
        } else {
                data_padlen = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode,
                                                          resp_len);
                assoc_buf_len = spu->spu_assoc_resp_len(ctx->cipher.mode,
                                                assoc_len, ret_iv_len,
                                                rctx->is_encrypt);
        }

        if (ctx->cipher.mode == CIPHER_MODE_CCM)
                /* ICV (after data) must be in the next 32-bit word for CCM */
                data_padlen += spu->spu_wordalign_padlen(assoc_buf_len +
                                                         resp_len +
                                                         data_padlen);

        if (data_padlen)
                /* have to catch gcm pad in separate buffer */
                rx_frag_num++;

        mssg->spu.dst = kmalloc_objs(struct scatterlist, rx_frag_num, rctx->gfp);
        if (!mssg->spu.dst)
                return -ENOMEM;

        sg = mssg->spu.dst;
        sg_init_table(sg, rx_frag_num);

        /* Space for SPU message header */
        sg_set_buf(sg++, rctx->msg_buf.spu_resp_hdr, ctx->spu_resp_hdr_len);

        if (assoc_buf_len) {
                /*
                 * Don't write directly to req->dst, because SPU may pad the
                 * assoc data in the response
                 */
                memset(rctx->msg_buf.a.resp_aad, 0, assoc_buf_len);
                sg_set_buf(sg++, rctx->msg_buf.a.resp_aad, assoc_buf_len);
        }

        if (resp_len) {
                /*
                 * Copy in each dst sg entry from request, up to chunksize.
                 * dst sg catches just the data. digest caught in separate buf.
                 */
                datalen = spu_msg_sg_add(&sg, &rctx->dst_sg, &rctx->dst_skip,
                                         rctx->dst_nents, resp_len);
                if (datalen < (resp_len)) {
                        pr_err("%s(): failed to copy dst sg to mbox msg. expected len %u, datalen %u",
                               __func__, resp_len, datalen);
                        return -EFAULT;
                }
        }

        /* If GCM/CCM data is padded, catch padding in separate buffer */
        if (data_padlen) {
                memset(rctx->msg_buf.a.gcmpad, 0, data_padlen);
                sg_set_buf(sg++, rctx->msg_buf.a.gcmpad, data_padlen);
        }

        /* Always catch ICV in separate buffer */
        sg_set_buf(sg++, rctx->msg_buf.digest, digestsize);

        flow_log("stat_pad_len %u\n", stat_pad_len);
        if (stat_pad_len) {
                memset(rctx->msg_buf.rx_stat_pad, 0, stat_pad_len);
                sg_set_buf(sg++, rctx->msg_buf.rx_stat_pad, stat_pad_len);
        }

        memset(rctx->msg_buf.rx_stat, 0, SPU_RX_STATUS_LEN);
        sg_set_buf(sg, rctx->msg_buf.rx_stat, spu->spu_rx_status_len());

        return 0;
}

/**
 * spu_aead_tx_sg_create() - Build up the scatterlist of buffers used to send a
 * SPU request message for an AEAD request. Includes SPU message headers and the
 * request data.
 * @mssg:       mailbox message containing the transmit sg
 * @rctx:       crypto request context
 * @tx_frag_num: number of scatterlist elements required to construct the
 *              SPU request message
 * @spu_hdr_len: length of SPU message header in bytes
 * @assoc:      crypto API associated data scatterlist
 * @assoc_len:  length of associated data
 * @assoc_nents: number of scatterlist entries containing assoc data
 * @aead_iv_len: length of AEAD IV, if included
 * @chunksize:  Number of bytes of request data
 * @aad_pad_len: Number of bytes of padding at end of AAD. For GCM/CCM.
 * @pad_len:    Number of pad bytes
 * @incl_icv:   If true, write separate ICV buffer after data and
 *              any padding
 *
 * The scatterlist that gets allocated here is freed in spu_chunk_cleanup()
 * when the request completes, whether the request is handled successfully or
 * there is an error.
 *
 * Return:
 *   0 if successful
 *   < 0 if an error
 */
static int spu_aead_tx_sg_create(struct brcm_message *mssg,
                                 struct iproc_reqctx_s *rctx,
                                 u8 tx_frag_num,
                                 u32 spu_hdr_len,
                                 struct scatterlist *assoc,
                                 unsigned int assoc_len,
                                 int assoc_nents,
                                 unsigned int aead_iv_len,
                                 unsigned int chunksize,
                                 u32 aad_pad_len, u32 pad_len, bool incl_icv)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct scatterlist *sg; /* used to build sgs in mbox message */
        struct scatterlist *assoc_sg = assoc;
        struct iproc_ctx_s *ctx = rctx->ctx;
        u32 datalen;            /* Number of bytes of data to write */
        u32 written;            /* Number of bytes of data written */
        u32 assoc_offset = 0;
        u32 stat_len;

        mssg->spu.src = kmalloc_objs(struct scatterlist, tx_frag_num, rctx->gfp);
        if (!mssg->spu.src)
                return -ENOMEM;

        sg = mssg->spu.src;
        sg_init_table(sg, tx_frag_num);

        sg_set_buf(sg++, rctx->msg_buf.bcm_spu_req_hdr,
                   BCM_HDR_LEN + spu_hdr_len);

        if (assoc_len) {
                /* Copy in each associated data sg entry from request */
                written = spu_msg_sg_add(&sg, &assoc_sg, &assoc_offset,
                                         assoc_nents, assoc_len);
                if (written < assoc_len) {
                        pr_err("%s(): failed to copy assoc sg to mbox msg",
                               __func__);
                        return -EFAULT;
                }
        }

        if (aead_iv_len)
                sg_set_buf(sg++, rctx->msg_buf.iv_ctr, aead_iv_len);

        if (aad_pad_len) {
                memset(rctx->msg_buf.a.req_aad_pad, 0, aad_pad_len);
                sg_set_buf(sg++, rctx->msg_buf.a.req_aad_pad, aad_pad_len);
        }

        datalen = chunksize;
        if ((chunksize > ctx->digestsize) && incl_icv)
                datalen -= ctx->digestsize;
        if (datalen) {
                /* For aead, a single msg should consume the entire src sg */
                written = spu_msg_sg_add(&sg, &rctx->src_sg, &rctx->src_skip,
                                         rctx->src_nents, datalen);
                if (written < datalen) {
                        pr_err("%s(): failed to copy src sg to mbox msg",
                               __func__);
                        return -EFAULT;
                }
        }

        if (pad_len) {
                memset(rctx->msg_buf.spu_req_pad, 0, pad_len);
                sg_set_buf(sg++, rctx->msg_buf.spu_req_pad, pad_len);
        }

        if (incl_icv)
                sg_set_buf(sg++, rctx->msg_buf.digest, ctx->digestsize);

        stat_len = spu->spu_tx_status_len();
        if (stat_len) {
                memset(rctx->msg_buf.tx_stat, 0, stat_len);
                sg_set_buf(sg, rctx->msg_buf.tx_stat, stat_len);
        }
        return 0;
}

/**
 * handle_aead_req() - Submit a SPU request message for the next chunk of the
 * current AEAD request.
 * @rctx:  Crypto request context
 *
 * Unlike other operation types, we assume the length of the request fits in
 * a single SPU request message. aead_enqueue() makes sure this is true.
 * Comments for other op types regarding threads applies here as well.
 *
 * Unlike incremental hash ops, where the spu returns the entire hash for
 * truncated algs like sha-224, the SPU returns just the truncated hash in
 * response to aead requests. So digestsize is always ctx->digestsize here.
 *
 * Return: -EINPROGRESS: crypto request has been accepted and result will be
 *                       returned asynchronously
 *         Any other value indicates an error
 */
static int handle_aead_req(struct iproc_reqctx_s *rctx)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct crypto_async_request *areq = rctx->parent;
        struct aead_request *req = container_of(areq,
                                                struct aead_request, base);
        struct iproc_ctx_s *ctx = rctx->ctx;
        int err;
        unsigned int chunksize;
        unsigned int resp_len;
        u32 spu_hdr_len;
        u32 db_size;
        u32 stat_pad_len;
        u32 pad_len;
        struct brcm_message *mssg;      /* mailbox message */
        struct spu_request_opts req_opts;
        struct spu_cipher_parms cipher_parms;
        struct spu_hash_parms hash_parms;
        struct spu_aead_parms aead_parms;
        int assoc_nents = 0;
        bool incl_icv = false;
        unsigned int digestsize = ctx->digestsize;

        /* number of entries in src and dst sg. Always includes SPU msg header.
         */
        u8 rx_frag_num = 2;     /* and STATUS */
        u8 tx_frag_num = 1;

        /* doing the whole thing at once */
        chunksize = rctx->total_todo;

        flow_log("%s: chunksize %u\n", __func__, chunksize);

        memset(&req_opts, 0, sizeof(req_opts));
        memset(&hash_parms, 0, sizeof(hash_parms));
        memset(&aead_parms, 0, sizeof(aead_parms));

        req_opts.is_inbound = !(rctx->is_encrypt);
        req_opts.auth_first = ctx->auth_first;
        req_opts.is_aead = true;
        req_opts.is_esp = ctx->is_esp;

        cipher_parms.alg = ctx->cipher.alg;
        cipher_parms.mode = ctx->cipher.mode;
        cipher_parms.type = ctx->cipher_type;
        cipher_parms.key_buf = ctx->enckey;
        cipher_parms.key_len = ctx->enckeylen;
        cipher_parms.iv_buf = rctx->msg_buf.iv_ctr;
        cipher_parms.iv_len = rctx->iv_ctr_len;

        hash_parms.alg = ctx->auth.alg;
        hash_parms.mode = ctx->auth.mode;
        hash_parms.type = HASH_TYPE_NONE;
        hash_parms.key_buf = (u8 *)ctx->authkey;
        hash_parms.key_len = ctx->authkeylen;
        hash_parms.digestsize = digestsize;

        if ((ctx->auth.alg == HASH_ALG_SHA224) &&
            (ctx->authkeylen < SHA224_DIGEST_SIZE))
                hash_parms.key_len = SHA224_DIGEST_SIZE;

        aead_parms.assoc_size = req->assoclen;
        if (ctx->is_esp && !ctx->is_rfc4543) {
                /*
                 * 8-byte IV is included assoc data in request. SPU2
                 * expects AAD to include just SPI and seqno. So
                 * subtract off the IV len.
                 */
                aead_parms.assoc_size -= GCM_RFC4106_IV_SIZE;

                if (rctx->is_encrypt) {
                        aead_parms.return_iv = true;
                        aead_parms.ret_iv_len = GCM_RFC4106_IV_SIZE;
                        aead_parms.ret_iv_off = GCM_ESP_SALT_SIZE;
                }
        } else {
                aead_parms.ret_iv_len = 0;
        }

        /*
         * Count number of sg entries from the crypto API request that are to
         * be included in this mailbox message. For dst sg, don't count space
         * for digest. Digest gets caught in a separate buffer and copied back
         * to dst sg when processing response.
         */
        rctx->src_nents = spu_sg_count(rctx->src_sg, rctx->src_skip, chunksize);
        rctx->dst_nents = spu_sg_count(rctx->dst_sg, rctx->dst_skip, chunksize);
        if (aead_parms.assoc_size)
                assoc_nents = spu_sg_count(rctx->assoc, 0,
                                           aead_parms.assoc_size);

        mssg = &rctx->mb_mssg;

        rctx->total_sent = chunksize;
        rctx->src_sent = chunksize;
        if (spu->spu_assoc_resp_len(ctx->cipher.mode,
                                    aead_parms.assoc_size,
                                    aead_parms.ret_iv_len,
                                    rctx->is_encrypt))
                rx_frag_num++;

        aead_parms.iv_len = spu->spu_aead_ivlen(ctx->cipher.mode,
                                                rctx->iv_ctr_len);

        if (ctx->auth.alg == HASH_ALG_AES)
                hash_parms.type = (enum hash_type)ctx->cipher_type;

        /* General case AAD padding (CCM and RFC4543 special cases below) */
        aead_parms.aad_pad_len = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode,
                                                 aead_parms.assoc_size);

        /* General case data padding (CCM decrypt special case below) */
        aead_parms.data_pad_len = spu->spu_gcm_ccm_pad_len(ctx->cipher.mode,
                                                           chunksize);

        if (ctx->cipher.mode == CIPHER_MODE_CCM) {
                /*
                 * for CCM, AAD len + 2 (rather than AAD len) needs to be
                 * 128-bit aligned
                 */
                aead_parms.aad_pad_len = spu->spu_gcm_ccm_pad_len(
                                         ctx->cipher.mode,
                                         aead_parms.assoc_size + 2);

                /*
                 * And when decrypting CCM, need to pad without including
                 * size of ICV which is tacked on to end of chunk
                 */
                if (!rctx->is_encrypt)
                        aead_parms.data_pad_len =
                                spu->spu_gcm_ccm_pad_len(ctx->cipher.mode,
                                                        chunksize - digestsize);

                /* CCM also requires software to rewrite portions of IV: */
                spu->spu_ccm_update_iv(digestsize, &cipher_parms, req->assoclen,
                                       chunksize, rctx->is_encrypt,
                                       ctx->is_esp);
        }

        if (ctx->is_rfc4543) {
                /*
                 * RFC4543: data is included in AAD, so don't pad after AAD
                 * and pad data based on both AAD + data size
                 */
                aead_parms.aad_pad_len = 0;
                if (!rctx->is_encrypt)
                        aead_parms.data_pad_len = spu->spu_gcm_ccm_pad_len(
                                        ctx->cipher.mode,
                                        aead_parms.assoc_size + chunksize -
                                        digestsize);
                else
                        aead_parms.data_pad_len = spu->spu_gcm_ccm_pad_len(
                                        ctx->cipher.mode,
                                        aead_parms.assoc_size + chunksize);

                req_opts.is_rfc4543 = true;
        }

        if (spu_req_incl_icv(ctx->cipher.mode, rctx->is_encrypt)) {
                incl_icv = true;
                tx_frag_num++;
                /* Copy ICV from end of src scatterlist to digest buf */
                sg_copy_part_to_buf(req->src, rctx->msg_buf.digest, digestsize,
                                    req->assoclen + rctx->total_sent -
                                    digestsize);
        }

        atomic64_add(chunksize, &iproc_priv.bytes_out);

        flow_log("%s()-sent chunksize:%u\n", __func__, chunksize);

        /* Prepend SPU header with type 3 BCM header */
        memcpy(rctx->msg_buf.bcm_spu_req_hdr, BCMHEADER, BCM_HDR_LEN);

        spu_hdr_len = spu->spu_create_request(rctx->msg_buf.bcm_spu_req_hdr +
                                              BCM_HDR_LEN, &req_opts,
                                              &cipher_parms, &hash_parms,
                                              &aead_parms, chunksize);

        /* Determine total length of padding. Put all padding in one buffer. */
        db_size = spu_real_db_size(aead_parms.assoc_size, aead_parms.iv_len, 0,
                                   chunksize, aead_parms.aad_pad_len,
                                   aead_parms.data_pad_len, 0);

        stat_pad_len = spu->spu_wordalign_padlen(db_size);

        if (stat_pad_len)
                rx_frag_num++;
        pad_len = aead_parms.data_pad_len + stat_pad_len;
        if (pad_len) {
                tx_frag_num++;
                spu->spu_request_pad(rctx->msg_buf.spu_req_pad,
                                     aead_parms.data_pad_len, 0,
                                     ctx->auth.alg, ctx->auth.mode,
                                     rctx->total_sent, stat_pad_len);
        }

        spu->spu_dump_msg_hdr(rctx->msg_buf.bcm_spu_req_hdr + BCM_HDR_LEN,
                              spu_hdr_len);
        dump_sg(rctx->assoc, 0, aead_parms.assoc_size);
        packet_dump("    aead iv: ", rctx->msg_buf.iv_ctr, aead_parms.iv_len);
        packet_log("BD:\n");
        dump_sg(rctx->src_sg, rctx->src_skip, chunksize);
        packet_dump("   pad: ", rctx->msg_buf.spu_req_pad, pad_len);

        /*
         * Build mailbox message containing SPU request msg and rx buffers
         * to catch response message
         */
        memset(mssg, 0, sizeof(*mssg));
        mssg->type = BRCM_MESSAGE_SPU;
        mssg->ctx = rctx;       /* Will be returned in response */

        /* Create rx scatterlist to catch result */
        rx_frag_num += rctx->dst_nents;
        resp_len = chunksize;

        /*
         * Always catch ICV in separate buffer. Have to for GCM/CCM because of
         * padding. Have to for SHA-224 and other truncated SHAs because SPU
         * sends entire digest back.
         */
        rx_frag_num++;

        if (((ctx->cipher.mode == CIPHER_MODE_GCM) ||
             (ctx->cipher.mode == CIPHER_MODE_CCM)) && !rctx->is_encrypt) {
                /*
                 * Input is ciphertxt plus ICV, but ICV not incl
                 * in output.
                 */
                resp_len -= ctx->digestsize;
                if (resp_len == 0)
                        /* no rx frags to catch output data */
                        rx_frag_num -= rctx->dst_nents;
        }

        err = spu_aead_rx_sg_create(mssg, req, rctx, rx_frag_num,
                                    aead_parms.assoc_size,
                                    aead_parms.ret_iv_len, resp_len, digestsize,
                                    stat_pad_len);
        if (err)
                return err;

        /* Create tx scatterlist containing SPU request message */
        tx_frag_num += rctx->src_nents;
        tx_frag_num += assoc_nents;
        if (aead_parms.aad_pad_len)
                tx_frag_num++;
        if (aead_parms.iv_len)
                tx_frag_num++;
        if (spu->spu_tx_status_len())
                tx_frag_num++;
        err = spu_aead_tx_sg_create(mssg, rctx, tx_frag_num, spu_hdr_len,
                                    rctx->assoc, aead_parms.assoc_size,
                                    assoc_nents, aead_parms.iv_len, chunksize,
                                    aead_parms.aad_pad_len, pad_len, incl_icv);
        if (err)
                return err;

        err = mailbox_send_message(mssg, req->base.flags, rctx->chan_idx);
        if (unlikely(err < 0))
                return err;

        return -EINPROGRESS;
}

/**
 * handle_aead_resp() - Process a SPU response message for an AEAD request.
 * @rctx:  Crypto request context
 */
static void handle_aead_resp(struct iproc_reqctx_s *rctx)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct crypto_async_request *areq = rctx->parent;
        struct aead_request *req = container_of(areq,
                                                struct aead_request, base);
        struct iproc_ctx_s *ctx = rctx->ctx;
        u32 payload_len;
        unsigned int icv_offset;
        u32 result_len;

        /* See how much data was returned */
        payload_len = spu->spu_payload_length(rctx->msg_buf.spu_resp_hdr);
        flow_log("payload_len %u\n", payload_len);

        /* only count payload */
        atomic64_add(payload_len, &iproc_priv.bytes_in);

        if (req->assoclen)
                packet_dump("  assoc_data ", rctx->msg_buf.a.resp_aad,
                            req->assoclen);

        /*
         * Copy the ICV back to the destination
         * buffer. In decrypt case, SPU gives us back the digest, but crypto
         * API doesn't expect ICV in dst buffer.
         */
        result_len = req->cryptlen;
        if (rctx->is_encrypt) {
                icv_offset = req->assoclen + rctx->total_sent;
                packet_dump("  ICV: ", rctx->msg_buf.digest, ctx->digestsize);
                flow_log("copying ICV to dst sg at offset %u\n", icv_offset);
                sg_copy_part_from_buf(req->dst, rctx->msg_buf.digest,
                                      ctx->digestsize, icv_offset);
                result_len += ctx->digestsize;
        }

        packet_log("response data:  ");
        dump_sg(req->dst, req->assoclen, result_len);

        atomic_inc(&iproc_priv.op_counts[SPU_OP_AEAD]);
        if (ctx->cipher.alg == CIPHER_ALG_AES) {
                if (ctx->cipher.mode == CIPHER_MODE_CCM)
                        atomic_inc(&iproc_priv.aead_cnt[AES_CCM]);
                else if (ctx->cipher.mode == CIPHER_MODE_GCM)
                        atomic_inc(&iproc_priv.aead_cnt[AES_GCM]);
                else
                        atomic_inc(&iproc_priv.aead_cnt[AUTHENC]);
        } else {
                atomic_inc(&iproc_priv.aead_cnt[AUTHENC]);
        }
}

/**
 * spu_chunk_cleanup() - Do cleanup after processing one chunk of a request
 * @rctx:  request context
 *
 * Mailbox scatterlists are allocated for each chunk. So free them after
 * processing each chunk.
 */
static void spu_chunk_cleanup(struct iproc_reqctx_s *rctx)
{
        /* mailbox message used to tx request */
        struct brcm_message *mssg = &rctx->mb_mssg;

        kfree(mssg->spu.src);
        kfree(mssg->spu.dst);
        memset(mssg, 0, sizeof(struct brcm_message));
}

/**
 * finish_req() - Used to invoke the complete callback from the requester when
 * a request has been handled asynchronously.
 * @rctx:  Request context
 * @err:   Indicates whether the request was successful or not
 *
 * Ensures that cleanup has been done for request
 */
static void finish_req(struct iproc_reqctx_s *rctx, int err)
{
        struct crypto_async_request *areq = rctx->parent;

        flow_log("%s() err:%d\n\n", __func__, err);

        /* No harm done if already called */
        spu_chunk_cleanup(rctx);

        if (areq)
                crypto_request_complete(areq, err);
}

/**
 * spu_rx_callback() - Callback from mailbox framework with a SPU response.
 * @cl:         mailbox client structure for SPU driver
 * @msg:        mailbox message containing SPU response
 */
static void spu_rx_callback(struct mbox_client *cl, void *msg)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct brcm_message *mssg = msg;
        struct iproc_reqctx_s *rctx;
        int err;

        rctx = mssg->ctx;
        if (unlikely(!rctx)) {
                /* This is fatal */
                pr_err("%s(): no request context", __func__);
                err = -EFAULT;
                goto cb_finish;
        }

        /* process the SPU status */
        err = spu->spu_status_process(rctx->msg_buf.rx_stat);
        if (err != 0) {
                if (err == SPU_INVALID_ICV)
                        atomic_inc(&iproc_priv.bad_icv);
                err = -EBADMSG;
                goto cb_finish;
        }

        /* Process the SPU response message */
        switch (rctx->ctx->alg->type) {
        case CRYPTO_ALG_TYPE_SKCIPHER:
                handle_skcipher_resp(rctx);
                break;
        case CRYPTO_ALG_TYPE_AHASH:
                handle_ahash_resp(rctx);
                break;
        case CRYPTO_ALG_TYPE_AEAD:
                handle_aead_resp(rctx);
                break;
        default:
                err = -EINVAL;
                goto cb_finish;
        }

        /*
         * If this response does not complete the request, then send the next
         * request chunk.
         */
        if (rctx->total_sent < rctx->total_todo) {
                /* Deallocate anything specific to previous chunk */
                spu_chunk_cleanup(rctx);

                switch (rctx->ctx->alg->type) {
                case CRYPTO_ALG_TYPE_SKCIPHER:
                        err = handle_skcipher_req(rctx);
                        break;
                case CRYPTO_ALG_TYPE_AHASH:
                        err = handle_ahash_req(rctx);
                        if (err == -EAGAIN)
                                /*
                                 * we saved data in hash carry, but tell crypto
                                 * API we successfully completed request.
                                 */
                                err = 0;
                        break;
                case CRYPTO_ALG_TYPE_AEAD:
                        err = handle_aead_req(rctx);
                        break;
                default:
                        err = -EINVAL;
                }

                if (err == -EINPROGRESS)
                        /* Successfully submitted request for next chunk */
                        return;
        }

cb_finish:
        finish_req(rctx, err);
}

/* ==================== Kernel Cryptographic API ==================== */

/**
 * skcipher_enqueue() - Handle skcipher encrypt or decrypt request.
 * @req:        Crypto API request
 * @encrypt:    true if encrypting; false if decrypting
 *
 * Return: -EINPROGRESS if request accepted and result will be returned
 *                      asynchronously
 *         < 0 if an error
 */
static int skcipher_enqueue(struct skcipher_request *req, bool encrypt)
{
        struct iproc_reqctx_s *rctx = skcipher_request_ctx(req);
        struct iproc_ctx_s *ctx =
            crypto_skcipher_ctx(crypto_skcipher_reqtfm(req));
        int err;

        flow_log("%s() enc:%u\n", __func__, encrypt);

        rctx->gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG |
                       CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC;
        rctx->parent = &req->base;
        rctx->is_encrypt = encrypt;
        rctx->bd_suppress = false;
        rctx->total_todo = req->cryptlen;
        rctx->src_sent = 0;
        rctx->total_sent = 0;
        rctx->total_received = 0;
        rctx->ctx = ctx;

        /* Initialize current position in src and dst scatterlists */
        rctx->src_sg = req->src;
        rctx->src_nents = 0;
        rctx->src_skip = 0;
        rctx->dst_sg = req->dst;
        rctx->dst_nents = 0;
        rctx->dst_skip = 0;

        if (ctx->cipher.mode == CIPHER_MODE_CBC ||
            ctx->cipher.mode == CIPHER_MODE_CTR ||
            ctx->cipher.mode == CIPHER_MODE_OFB ||
            ctx->cipher.mode == CIPHER_MODE_XTS ||
            ctx->cipher.mode == CIPHER_MODE_GCM ||
            ctx->cipher.mode == CIPHER_MODE_CCM) {
                rctx->iv_ctr_len =
                    crypto_skcipher_ivsize(crypto_skcipher_reqtfm(req));
                memcpy(rctx->msg_buf.iv_ctr, req->iv, rctx->iv_ctr_len);
        } else {
                rctx->iv_ctr_len = 0;
        }

        /* Choose a SPU to process this request */
        rctx->chan_idx = select_channel();
        err = handle_skcipher_req(rctx);
        if (err != -EINPROGRESS)
                /* synchronous result */
                spu_chunk_cleanup(rctx);

        return err;
}

static int des_setkey(struct crypto_skcipher *cipher, const u8 *key,
                      unsigned int keylen)
{
        struct iproc_ctx_s *ctx = crypto_skcipher_ctx(cipher);
        int err;

        err = verify_skcipher_des_key(cipher, key);
        if (err)
                return err;

        ctx->cipher_type = CIPHER_TYPE_DES;
        return 0;
}

static int threedes_setkey(struct crypto_skcipher *cipher, const u8 *key,
                           unsigned int keylen)
{
        struct iproc_ctx_s *ctx = crypto_skcipher_ctx(cipher);
        int err;

        err = verify_skcipher_des3_key(cipher, key);
        if (err)
                return err;

        ctx->cipher_type = CIPHER_TYPE_3DES;
        return 0;
}

static int aes_setkey(struct crypto_skcipher *cipher, const u8 *key,
                      unsigned int keylen)
{
        struct iproc_ctx_s *ctx = crypto_skcipher_ctx(cipher);

        if (ctx->cipher.mode == CIPHER_MODE_XTS)
                /* XTS includes two keys of equal length */
                keylen = keylen / 2;

        switch (keylen) {
        case AES_KEYSIZE_128:
                ctx->cipher_type = CIPHER_TYPE_AES128;
                break;
        case AES_KEYSIZE_192:
                ctx->cipher_type = CIPHER_TYPE_AES192;
                break;
        case AES_KEYSIZE_256:
                ctx->cipher_type = CIPHER_TYPE_AES256;
                break;
        default:
                return -EINVAL;
        }
        WARN_ON((ctx->max_payload != SPU_MAX_PAYLOAD_INF) &&
                ((ctx->max_payload % AES_BLOCK_SIZE) != 0));
        return 0;
}

static int skcipher_setkey(struct crypto_skcipher *cipher, const u8 *key,
                             unsigned int keylen)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct iproc_ctx_s *ctx = crypto_skcipher_ctx(cipher);
        struct spu_cipher_parms cipher_parms;
        u32 alloc_len = 0;
        int err;

        flow_log("skcipher_setkey() keylen: %d\n", keylen);
        flow_dump("  key: ", key, keylen);

        switch (ctx->cipher.alg) {
        case CIPHER_ALG_DES:
                err = des_setkey(cipher, key, keylen);
                break;
        case CIPHER_ALG_3DES:
                err = threedes_setkey(cipher, key, keylen);
                break;
        case CIPHER_ALG_AES:
                err = aes_setkey(cipher, key, keylen);
                break;
        default:
                pr_err("%s() Error: unknown cipher alg\n", __func__);
                err = -EINVAL;
        }
        if (err)
                return err;

        memcpy(ctx->enckey, key, keylen);
        ctx->enckeylen = keylen;

        /* SPU needs XTS keys in the reverse order the crypto API presents */
        if ((ctx->cipher.alg == CIPHER_ALG_AES) &&
            (ctx->cipher.mode == CIPHER_MODE_XTS)) {
                unsigned int xts_keylen = keylen / 2;

                memcpy(ctx->enckey, key + xts_keylen, xts_keylen);
                memcpy(ctx->enckey + xts_keylen, key, xts_keylen);
        }

        if (spu->spu_type == SPU_TYPE_SPUM)
                alloc_len = BCM_HDR_LEN + SPU_HEADER_ALLOC_LEN;
        else if (spu->spu_type == SPU_TYPE_SPU2)
                alloc_len = BCM_HDR_LEN + SPU2_HEADER_ALLOC_LEN;
        memset(ctx->bcm_spu_req_hdr, 0, alloc_len);
        cipher_parms.iv_buf = NULL;
        cipher_parms.iv_len = crypto_skcipher_ivsize(cipher);
        flow_log("%s: iv_len %u\n", __func__, cipher_parms.iv_len);

        cipher_parms.alg = ctx->cipher.alg;
        cipher_parms.mode = ctx->cipher.mode;
        cipher_parms.type = ctx->cipher_type;
        cipher_parms.key_buf = ctx->enckey;
        cipher_parms.key_len = ctx->enckeylen;

        /* Prepend SPU request message with BCM header */
        memcpy(ctx->bcm_spu_req_hdr, BCMHEADER, BCM_HDR_LEN);
        ctx->spu_req_hdr_len =
            spu->spu_cipher_req_init(ctx->bcm_spu_req_hdr + BCM_HDR_LEN,
                                     &cipher_parms);

        ctx->spu_resp_hdr_len = spu->spu_response_hdr_len(ctx->authkeylen,
                                                          ctx->enckeylen,
                                                          false);

        atomic_inc(&iproc_priv.setkey_cnt[SPU_OP_CIPHER]);

        return 0;
}

static int skcipher_encrypt(struct skcipher_request *req)
{
        flow_log("skcipher_encrypt() nbytes:%u\n", req->cryptlen);

        return skcipher_enqueue(req, true);
}

static int skcipher_decrypt(struct skcipher_request *req)
{
        flow_log("skcipher_decrypt() nbytes:%u\n", req->cryptlen);
        return skcipher_enqueue(req, false);
}

static int ahash_enqueue(struct ahash_request *req)
{
        struct iproc_reqctx_s *rctx = ahash_request_ctx(req);
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm);
        int err;
        const char *alg_name;

        flow_log("ahash_enqueue() nbytes:%u\n", req->nbytes);

        rctx->gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG |
                       CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC;
        rctx->parent = &req->base;
        rctx->ctx = ctx;
        rctx->bd_suppress = true;
        memset(&rctx->mb_mssg, 0, sizeof(struct brcm_message));

        /* Initialize position in src scatterlist */
        rctx->src_sg = req->src;
        rctx->src_skip = 0;
        rctx->src_nents = 0;
        rctx->dst_sg = NULL;
        rctx->dst_skip = 0;
        rctx->dst_nents = 0;

        /* SPU2 hardware does not compute hash of zero length data */
        if ((rctx->is_final == 1) && (rctx->total_todo == 0) &&
            (iproc_priv.spu.spu_type == SPU_TYPE_SPU2)) {
                alg_name = crypto_ahash_alg_name(tfm);
                flow_log("Doing %sfinal %s zero-len hash request in software\n",
                         rctx->is_final ? "" : "non-", alg_name);
                err = do_shash((unsigned char *)alg_name, req->result,
                               NULL, 0, NULL, 0, ctx->authkey,
                               ctx->authkeylen);
                if (err < 0)
                        flow_log("Hash request failed with error %d\n", err);
                return err;
        }
        /* Choose a SPU to process this request */
        rctx->chan_idx = select_channel();

        err = handle_ahash_req(rctx);
        if (err != -EINPROGRESS)
                /* synchronous result */
                spu_chunk_cleanup(rctx);

        if (err == -EAGAIN)
                /*
                 * we saved data in hash carry, but tell crypto API
                 * we successfully completed request.
                 */
                err = 0;

        return err;
}

static int __ahash_init(struct ahash_request *req)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct iproc_reqctx_s *rctx = ahash_request_ctx(req);
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm);

        flow_log("%s()\n", __func__);

        /* Initialize the context */
        rctx->hash_carry_len = 0;
        rctx->is_final = 0;

        rctx->total_todo = 0;
        rctx->src_sent = 0;
        rctx->total_sent = 0;
        rctx->total_received = 0;

        ctx->digestsize = crypto_ahash_digestsize(tfm);
        /* If we add a hash whose digest is larger, catch it here. */
        WARN_ON(ctx->digestsize > MAX_DIGEST_SIZE);

        rctx->is_sw_hmac = false;

        ctx->spu_resp_hdr_len = spu->spu_response_hdr_len(ctx->authkeylen, 0,
                                                          true);

        return 0;
}

/**
 * spu_no_incr_hash() - Determine whether incremental hashing is supported.
 * @ctx:  Crypto session context
 *
 * SPU-2 does not support incremental hashing (we'll have to revisit and
 * condition based on chip revision or device tree entry if future versions do
 * support incremental hash)
 *
 * SPU-M also doesn't support incremental hashing of AES-XCBC
 *
 * Return: true if incremental hashing is not supported
 *         false otherwise
 */
static bool spu_no_incr_hash(struct iproc_ctx_s *ctx)
{
        struct spu_hw *spu = &iproc_priv.spu;

        if (spu->spu_type == SPU_TYPE_SPU2)
                return true;

        if ((ctx->auth.alg == HASH_ALG_AES) &&
            (ctx->auth.mode == HASH_MODE_XCBC))
                return true;

        /* Otherwise, incremental hashing is supported */
        return false;
}

static int ahash_init(struct ahash_request *req)
{
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm);
        const char *alg_name;
        struct crypto_shash *hash;
        int ret;
        gfp_t gfp;

        if (spu_no_incr_hash(ctx)) {
                /*
                 * If we get an incremental hashing request and it's not
                 * supported by the hardware, we need to handle it in software
                 * by calling synchronous hash functions.
                 */
                alg_name = crypto_ahash_alg_name(tfm);
                hash = crypto_alloc_shash(alg_name, 0, 0);
                if (IS_ERR(hash)) {
                        ret = PTR_ERR(hash);
                        goto err;
                }

                gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG |
                       CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC;
                ctx->shash = kmalloc(sizeof(*ctx->shash) +
                                     crypto_shash_descsize(hash), gfp);
                if (!ctx->shash) {
                        ret = -ENOMEM;
                        goto err_hash;
                }
                ctx->shash->tfm = hash;

                /* Set the key using data we already have from setkey */
                if (ctx->authkeylen > 0) {
                        ret = crypto_shash_setkey(hash, ctx->authkey,
                                                  ctx->authkeylen);
                        if (ret)
                                goto err_shash;
                }

                /* Initialize hash w/ this key and other params */
                ret = crypto_shash_init(ctx->shash);
                if (ret)
                        goto err_shash;
        } else {
                /* Otherwise call the internal function which uses SPU hw */
                ret = __ahash_init(req);
        }

        return ret;

err_shash:
        kfree(ctx->shash);
err_hash:
        crypto_free_shash(hash);
err:
        return ret;
}

static int __ahash_update(struct ahash_request *req)
{
        struct iproc_reqctx_s *rctx = ahash_request_ctx(req);

        flow_log("ahash_update() nbytes:%u\n", req->nbytes);

        if (!req->nbytes)
                return 0;
        rctx->total_todo += req->nbytes;
        rctx->src_sent = 0;

        return ahash_enqueue(req);
}

static int ahash_update(struct ahash_request *req)
{
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm);
        u8 *tmpbuf;
        int ret;
        int nents;
        gfp_t gfp;

        if (spu_no_incr_hash(ctx)) {
                /*
                 * If we get an incremental hashing request and it's not
                 * supported by the hardware, we need to handle it in software
                 * by calling synchronous hash functions.
                 */
                if (req->src)
                        nents = sg_nents(req->src);
                else
                        return -EINVAL;

                /* Copy data from req scatterlist to tmp buffer */
                gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG |
                       CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC;
                tmpbuf = kmalloc(req->nbytes, gfp);
                if (!tmpbuf)
                        return -ENOMEM;

                if (sg_copy_to_buffer(req->src, nents, tmpbuf, req->nbytes) !=
                                req->nbytes) {
                        kfree(tmpbuf);
                        return -EINVAL;
                }

                /* Call synchronous update */
                ret = crypto_shash_update(ctx->shash, tmpbuf, req->nbytes);
                kfree(tmpbuf);
        } else {
                /* Otherwise call the internal function which uses SPU hw */
                ret = __ahash_update(req);
        }

        return ret;
}

static int __ahash_final(struct ahash_request *req)
{
        struct iproc_reqctx_s *rctx = ahash_request_ctx(req);

        flow_log("ahash_final() nbytes:%u\n", req->nbytes);

        rctx->is_final = 1;

        return ahash_enqueue(req);
}

static int ahash_final(struct ahash_request *req)
{
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm);
        int ret;

        if (spu_no_incr_hash(ctx)) {
                /*
                 * If we get an incremental hashing request and it's not
                 * supported by the hardware, we need to handle it in software
                 * by calling synchronous hash functions.
                 */
                ret = crypto_shash_final(ctx->shash, req->result);

                /* Done with hash, can deallocate it now */
                crypto_free_shash(ctx->shash->tfm);
                kfree(ctx->shash);

        } else {
                /* Otherwise call the internal function which uses SPU hw */
                ret = __ahash_final(req);
        }

        return ret;
}

static int __ahash_finup(struct ahash_request *req)
{
        struct iproc_reqctx_s *rctx = ahash_request_ctx(req);

        flow_log("ahash_finup() nbytes:%u\n", req->nbytes);

        rctx->total_todo += req->nbytes;
        rctx->src_sent = 0;
        rctx->is_final = 1;

        return ahash_enqueue(req);
}

static int ahash_finup(struct ahash_request *req)
{
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm);
        u8 *tmpbuf;
        int ret;
        int nents;
        gfp_t gfp;

        if (spu_no_incr_hash(ctx)) {
                /*
                 * If we get an incremental hashing request and it's not
                 * supported by the hardware, we need to handle it in software
                 * by calling synchronous hash functions.
                 */
                if (req->src) {
                        nents = sg_nents(req->src);
                } else {
                        ret = -EINVAL;
                        goto ahash_finup_exit;
                }

                /* Copy data from req scatterlist to tmp buffer */
                gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG |
                       CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC;
                tmpbuf = kmalloc(req->nbytes, gfp);
                if (!tmpbuf) {
                        ret = -ENOMEM;
                        goto ahash_finup_exit;
                }

                if (sg_copy_to_buffer(req->src, nents, tmpbuf, req->nbytes) !=
                                req->nbytes) {
                        ret = -EINVAL;
                        goto ahash_finup_free;
                }

                /* Call synchronous update */
                ret = crypto_shash_finup(ctx->shash, tmpbuf, req->nbytes,
                                         req->result);
        } else {
                /* Otherwise call the internal function which uses SPU hw */
                return __ahash_finup(req);
        }
ahash_finup_free:
        kfree(tmpbuf);

ahash_finup_exit:
        /* Done with hash, can deallocate it now */
        crypto_free_shash(ctx->shash->tfm);
        kfree(ctx->shash);
        return ret;
}

static int ahash_digest(struct ahash_request *req)
{
        int err;

        flow_log("ahash_digest() nbytes:%u\n", req->nbytes);

        /* whole thing at once */
        err = __ahash_init(req);
        if (!err)
                err = __ahash_finup(req);

        return err;
}

static int ahash_setkey(struct crypto_ahash *ahash, const u8 *key,
                        unsigned int keylen)
{
        struct iproc_ctx_s *ctx = crypto_ahash_ctx(ahash);

        flow_log("%s() ahash:%p key:%p keylen:%u\n",
                 __func__, ahash, key, keylen);
        flow_dump("  key: ", key, keylen);

        if (ctx->auth.alg == HASH_ALG_AES) {
                switch (keylen) {
                case AES_KEYSIZE_128:
                        ctx->cipher_type = CIPHER_TYPE_AES128;
                        break;
                case AES_KEYSIZE_192:
                        ctx->cipher_type = CIPHER_TYPE_AES192;
                        break;
                case AES_KEYSIZE_256:
                        ctx->cipher_type = CIPHER_TYPE_AES256;
                        break;
                default:
                        pr_err("%s() Error: Invalid key length\n", __func__);
                        return -EINVAL;
                }
        } else {
                pr_err("%s() Error: unknown hash alg\n", __func__);
                return -EINVAL;
        }
        memcpy(ctx->authkey, key, keylen);
        ctx->authkeylen = keylen;

        return 0;
}

static int ahash_export(struct ahash_request *req, void *out)
{
        const struct iproc_reqctx_s *rctx = ahash_request_ctx(req);
        struct spu_hash_export_s *spu_exp = (struct spu_hash_export_s *)out;

        spu_exp->total_todo = rctx->total_todo;
        spu_exp->total_sent = rctx->total_sent;
        spu_exp->is_sw_hmac = rctx->is_sw_hmac;
        memcpy(spu_exp->hash_carry, rctx->hash_carry, sizeof(rctx->hash_carry));
        spu_exp->hash_carry_len = rctx->hash_carry_len;
        memcpy(spu_exp->incr_hash, rctx->incr_hash, sizeof(rctx->incr_hash));

        return 0;
}

static int ahash_import(struct ahash_request *req, const void *in)
{
        struct iproc_reqctx_s *rctx = ahash_request_ctx(req);
        struct spu_hash_export_s *spu_exp = (struct spu_hash_export_s *)in;

        rctx->total_todo = spu_exp->total_todo;
        rctx->total_sent = spu_exp->total_sent;
        rctx->is_sw_hmac = spu_exp->is_sw_hmac;
        memcpy(rctx->hash_carry, spu_exp->hash_carry, sizeof(rctx->hash_carry));
        rctx->hash_carry_len = spu_exp->hash_carry_len;
        memcpy(rctx->incr_hash, spu_exp->incr_hash, sizeof(rctx->incr_hash));

        return 0;
}

static int ahash_hmac_setkey(struct crypto_ahash *ahash, const u8 *key,
                             unsigned int keylen)
{
        struct iproc_ctx_s *ctx = crypto_ahash_ctx(ahash);
        unsigned int blocksize =
                crypto_tfm_alg_blocksize(crypto_ahash_tfm(ahash));
        unsigned int digestsize = crypto_ahash_digestsize(ahash);
        unsigned int index;
        int rc;

        flow_log("%s() ahash:%p key:%p keylen:%u blksz:%u digestsz:%u\n",
                 __func__, ahash, key, keylen, blocksize, digestsize);
        flow_dump("  key: ", key, keylen);

        if (keylen > blocksize) {
                switch (ctx->auth.alg) {
                case HASH_ALG_MD5:
                        rc = do_shash("md5", ctx->authkey, key, keylen, NULL,
                                      0, NULL, 0);
                        break;
                case HASH_ALG_SHA1:
                        rc = do_shash("sha1", ctx->authkey, key, keylen, NULL,
                                      0, NULL, 0);
                        break;
                case HASH_ALG_SHA224:
                        rc = do_shash("sha224", ctx->authkey, key, keylen, NULL,
                                      0, NULL, 0);
                        break;
                case HASH_ALG_SHA256:
                        rc = do_shash("sha256", ctx->authkey, key, keylen, NULL,
                                      0, NULL, 0);
                        break;
                case HASH_ALG_SHA384:
                        rc = do_shash("sha384", ctx->authkey, key, keylen, NULL,
                                      0, NULL, 0);
                        break;
                case HASH_ALG_SHA512:
                        rc = do_shash("sha512", ctx->authkey, key, keylen, NULL,
                                      0, NULL, 0);
                        break;
                case HASH_ALG_SHA3_224:
                        rc = do_shash("sha3-224", ctx->authkey, key, keylen,
                                      NULL, 0, NULL, 0);
                        break;
                case HASH_ALG_SHA3_256:
                        rc = do_shash("sha3-256", ctx->authkey, key, keylen,
                                      NULL, 0, NULL, 0);
                        break;
                case HASH_ALG_SHA3_384:
                        rc = do_shash("sha3-384", ctx->authkey, key, keylen,
                                      NULL, 0, NULL, 0);
                        break;
                case HASH_ALG_SHA3_512:
                        rc = do_shash("sha3-512", ctx->authkey, key, keylen,
                                      NULL, 0, NULL, 0);
                        break;
                default:
                        pr_err("%s() Error: unknown hash alg\n", __func__);
                        return -EINVAL;
                }
                if (rc < 0) {
                        pr_err("%s() Error %d computing shash for %s\n",
                               __func__, rc, hash_alg_name[ctx->auth.alg]);
                        return rc;
                }
                ctx->authkeylen = digestsize;

                flow_log("  keylen > digestsize... hashed\n");
                flow_dump("  newkey: ", ctx->authkey, ctx->authkeylen);
        } else {
                memcpy(ctx->authkey, key, keylen);
                ctx->authkeylen = keylen;
        }

        /*
         * Full HMAC operation in SPUM is not verified,
         * So keeping the generation of IPAD, OPAD and
         * outer hashing in software.
         */
        if (iproc_priv.spu.spu_type == SPU_TYPE_SPUM) {
                memcpy(ctx->ipad, ctx->authkey, ctx->authkeylen);
                memset(ctx->ipad + ctx->authkeylen, 0,
                       blocksize - ctx->authkeylen);
                ctx->authkeylen = 0;
                unsafe_memcpy(ctx->opad, ctx->ipad, blocksize,
                              "fortified memcpy causes -Wrestrict warning");

                for (index = 0; index < blocksize; index++) {
                        ctx->ipad[index] ^= HMAC_IPAD_VALUE;
                        ctx->opad[index] ^= HMAC_OPAD_VALUE;
                }

                flow_dump("  ipad: ", ctx->ipad, blocksize);
                flow_dump("  opad: ", ctx->opad, blocksize);
        }
        ctx->digestsize = digestsize;
        atomic_inc(&iproc_priv.setkey_cnt[SPU_OP_HMAC]);

        return 0;
}

static int ahash_hmac_init(struct ahash_request *req)
{
        int ret;
        struct iproc_reqctx_s *rctx = ahash_request_ctx(req);
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm);
        unsigned int blocksize =
                        crypto_tfm_alg_blocksize(crypto_ahash_tfm(tfm));

        flow_log("ahash_hmac_init()\n");

        /* init the context as a hash */
        ret = ahash_init(req);
        if (ret)
                return ret;

        if (!spu_no_incr_hash(ctx)) {
                /* SPU-M can do incr hashing but needs sw for outer HMAC */
                rctx->is_sw_hmac = true;
                ctx->auth.mode = HASH_MODE_HASH;
                /* start with a prepended ipad */
                memcpy(rctx->hash_carry, ctx->ipad, blocksize);
                rctx->hash_carry_len = blocksize;
                rctx->total_todo += blocksize;
        }

        return 0;
}

static int ahash_hmac_update(struct ahash_request *req)
{
        flow_log("ahash_hmac_update() nbytes:%u\n", req->nbytes);

        if (!req->nbytes)
                return 0;

        return ahash_update(req);
}

static int ahash_hmac_final(struct ahash_request *req)
{
        flow_log("ahash_hmac_final() nbytes:%u\n", req->nbytes);

        return ahash_final(req);
}

static int ahash_hmac_finup(struct ahash_request *req)
{
        flow_log("ahash_hmac_finupl() nbytes:%u\n", req->nbytes);

        return ahash_finup(req);
}

static int ahash_hmac_digest(struct ahash_request *req)
{
        struct iproc_reqctx_s *rctx = ahash_request_ctx(req);
        struct crypto_ahash *tfm = crypto_ahash_reqtfm(req);
        struct iproc_ctx_s *ctx = crypto_ahash_ctx(tfm);
        unsigned int blocksize =
                        crypto_tfm_alg_blocksize(crypto_ahash_tfm(tfm));

        flow_log("ahash_hmac_digest() nbytes:%u\n", req->nbytes);

        /* Perform initialization and then call finup */
        __ahash_init(req);

        if (iproc_priv.spu.spu_type == SPU_TYPE_SPU2) {
                /*
                 * SPU2 supports full HMAC implementation in the
                 * hardware, need not to generate IPAD, OPAD and
                 * outer hash in software.
                 * Only for hash key len > hash block size, SPU2
                 * expects to perform hashing on the key, shorten
                 * it to digest size and feed it as hash key.
                 */
                rctx->is_sw_hmac = false;
                ctx->auth.mode = HASH_MODE_HMAC;
        } else {
                rctx->is_sw_hmac = true;
                ctx->auth.mode = HASH_MODE_HASH;
                /* start with a prepended ipad */
                memcpy(rctx->hash_carry, ctx->ipad, blocksize);
                rctx->hash_carry_len = blocksize;
                rctx->total_todo += blocksize;
        }

        return __ahash_finup(req);
}

/* aead helpers */

static int aead_need_fallback(struct aead_request *req)
{
        struct iproc_reqctx_s *rctx = aead_request_ctx(req);
        struct spu_hw *spu = &iproc_priv.spu;
        struct crypto_aead *aead = crypto_aead_reqtfm(req);
        struct iproc_ctx_s *ctx = crypto_aead_ctx(aead);
        u32 payload_len;

        /*
         * SPU hardware cannot handle the AES-GCM/CCM case where plaintext
         * and AAD are both 0 bytes long. So use fallback in this case.
         */
        if (((ctx->cipher.mode == CIPHER_MODE_GCM) ||
             (ctx->cipher.mode == CIPHER_MODE_CCM)) &&
            (req->assoclen == 0)) {
                if ((rctx->is_encrypt && (req->cryptlen == 0)) ||
                    (!rctx->is_encrypt && (req->cryptlen == ctx->digestsize))) {
                        flow_log("AES GCM/CCM needs fallback for 0 len req\n");
                        return 1;
                }
        }

        /* SPU-M hardware only supports CCM digest size of 8, 12, or 16 bytes */
        if ((ctx->cipher.mode == CIPHER_MODE_CCM) &&
            (spu->spu_type == SPU_TYPE_SPUM) &&
            (ctx->digestsize != 8) && (ctx->digestsize != 12) &&
            (ctx->digestsize != 16)) {
                flow_log("%s() AES CCM needs fallback for digest size %d\n",
                         __func__, ctx->digestsize);
                return 1;
        }

        /*
         * SPU-M on NSP has an issue where AES-CCM hash is not correct
         * when AAD size is 0
         */
        if ((ctx->cipher.mode == CIPHER_MODE_CCM) &&
            (spu->spu_subtype == SPU_SUBTYPE_SPUM_NSP) &&
            (req->assoclen == 0)) {
                flow_log("%s() AES_CCM needs fallback for 0 len AAD on NSP\n",
                         __func__);
                return 1;
        }

        /*
         * RFC4106 and RFC4543 cannot handle the case where AAD is other than
         * 16 or 20 bytes long. So use fallback in this case.
         */
        if (ctx->cipher.mode == CIPHER_MODE_GCM &&
            ctx->cipher.alg == CIPHER_ALG_AES &&
            rctx->iv_ctr_len == GCM_RFC4106_IV_SIZE &&
            req->assoclen != 16 && req->assoclen != 20) {
                flow_log("RFC4106/RFC4543 needs fallback for assoclen"
                         " other than 16 or 20 bytes\n");
                return 1;
        }

        payload_len = req->cryptlen;
        if (spu->spu_type == SPU_TYPE_SPUM)
                payload_len += req->assoclen;

        flow_log("%s() payload len: %u\n", __func__, payload_len);

        if (ctx->max_payload == SPU_MAX_PAYLOAD_INF)
                return 0;
        else
                return payload_len > ctx->max_payload;
}

static int aead_do_fallback(struct aead_request *req, bool is_encrypt)
{
        struct crypto_aead *aead = crypto_aead_reqtfm(req);
        struct crypto_tfm *tfm = crypto_aead_tfm(aead);
        struct iproc_reqctx_s *rctx = aead_request_ctx(req);
        struct iproc_ctx_s *ctx = crypto_tfm_ctx(tfm);
        struct aead_request *subreq;

        flow_log("%s() enc:%u\n", __func__, is_encrypt);

        if (!ctx->fallback_cipher)
                return -EINVAL;

        subreq = &rctx->req;
        aead_request_set_tfm(subreq, ctx->fallback_cipher);
        aead_request_set_callback(subreq, aead_request_flags(req),
                                  req->base.complete, req->base.data);
        aead_request_set_crypt(subreq, req->src, req->dst, req->cryptlen,
                               req->iv);
        aead_request_set_ad(subreq, req->assoclen);

        return is_encrypt ? crypto_aead_encrypt(req) :
                            crypto_aead_decrypt(req);
}

static int aead_enqueue(struct aead_request *req, bool is_encrypt)
{
        struct iproc_reqctx_s *rctx = aead_request_ctx(req);
        struct crypto_aead *aead = crypto_aead_reqtfm(req);
        struct iproc_ctx_s *ctx = crypto_aead_ctx(aead);
        int err;

        flow_log("%s() enc:%u\n", __func__, is_encrypt);

        if (req->assoclen > MAX_ASSOC_SIZE) {
                pr_err
                    ("%s() Error: associated data too long. (%u > %u bytes)\n",
                     __func__, req->assoclen, MAX_ASSOC_SIZE);
                return -EINVAL;
        }

        rctx->gfp = (req->base.flags & (CRYPTO_TFM_REQ_MAY_BACKLOG |
                       CRYPTO_TFM_REQ_MAY_SLEEP)) ? GFP_KERNEL : GFP_ATOMIC;
        rctx->parent = &req->base;
        rctx->is_encrypt = is_encrypt;
        rctx->bd_suppress = false;
        rctx->total_todo = req->cryptlen;
        rctx->src_sent = 0;
        rctx->total_sent = 0;
        rctx->total_received = 0;
        rctx->is_sw_hmac = false;
        rctx->ctx = ctx;
        memset(&rctx->mb_mssg, 0, sizeof(struct brcm_message));

        /* assoc data is at start of src sg */
        rctx->assoc = req->src;

        /*
         * Init current position in src scatterlist to be after assoc data.
         * src_skip set to buffer offset where data begins. (Assoc data could
         * end in the middle of a buffer.)
         */
        if (spu_sg_at_offset(req->src, req->assoclen, &rctx->src_sg,
                             &rctx->src_skip) < 0) {
                pr_err("%s() Error: Unable to find start of src data\n",
                       __func__);
                return -EINVAL;
        }

        rctx->src_nents = 0;
        rctx->dst_nents = 0;
        if (req->dst == req->src) {
                rctx->dst_sg = rctx->src_sg;
                rctx->dst_skip = rctx->src_skip;
        } else {
                /*
                 * Expect req->dst to have room for assoc data followed by
                 * output data and ICV, if encrypt. So initialize dst_sg
                 * to point beyond assoc len offset.
                 */
                if (spu_sg_at_offset(req->dst, req->assoclen, &rctx->dst_sg,
                                     &rctx->dst_skip) < 0) {
                        pr_err("%s() Error: Unable to find start of dst data\n",
                               __func__);
                        return -EINVAL;
                }
        }

        if (ctx->cipher.mode == CIPHER_MODE_CBC ||
            ctx->cipher.mode == CIPHER_MODE_CTR ||
            ctx->cipher.mode == CIPHER_MODE_OFB ||
            ctx->cipher.mode == CIPHER_MODE_XTS ||
            ctx->cipher.mode == CIPHER_MODE_GCM) {
                rctx->iv_ctr_len =
                        ctx->salt_len +
                        crypto_aead_ivsize(crypto_aead_reqtfm(req));
        } else if (ctx->cipher.mode == CIPHER_MODE_CCM) {
                rctx->iv_ctr_len = CCM_AES_IV_SIZE;
        } else {
                rctx->iv_ctr_len = 0;
        }

        rctx->hash_carry_len = 0;

        flow_log("  src sg: %p\n", req->src);
        flow_log("  rctx->src_sg: %p, src_skip %u\n",
                 rctx->src_sg, rctx->src_skip);
        flow_log("  assoc:  %p, assoclen %u\n", rctx->assoc, req->assoclen);
        flow_log("  dst sg: %p\n", req->dst);
        flow_log("  rctx->dst_sg: %p, dst_skip %u\n",
                 rctx->dst_sg, rctx->dst_skip);
        flow_log("  iv_ctr_len:%u\n", rctx->iv_ctr_len);
        flow_dump("  iv: ", req->iv, rctx->iv_ctr_len);
        flow_log("  authkeylen:%u\n", ctx->authkeylen);
        flow_log("  is_esp: %s\n", str_yes_no(ctx->is_esp));

        if (ctx->max_payload == SPU_MAX_PAYLOAD_INF)
                flow_log("  max_payload infinite");
        else
                flow_log("  max_payload: %u\n", ctx->max_payload);

        if (unlikely(aead_need_fallback(req)))
                return aead_do_fallback(req, is_encrypt);

        /*
         * Do memory allocations for request after fallback check, because if we
         * do fallback, we won't call finish_req() to dealloc.
         */
        if (rctx->iv_ctr_len) {
                if (ctx->salt_len)
                        memcpy(rctx->msg_buf.iv_ctr + ctx->salt_offset,
                               ctx->salt, ctx->salt_len);
                memcpy(rctx->msg_buf.iv_ctr + ctx->salt_offset + ctx->salt_len,
                       req->iv,
                       rctx->iv_ctr_len - ctx->salt_len - ctx->salt_offset);
        }

        rctx->chan_idx = select_channel();
        err = handle_aead_req(rctx);
        if (err != -EINPROGRESS)
                /* synchronous result */
                spu_chunk_cleanup(rctx);

        return err;
}

static int aead_authenc_setkey(struct crypto_aead *cipher,
                               const u8 *key, unsigned int keylen)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher);
        struct crypto_tfm *tfm = crypto_aead_tfm(cipher);
        struct crypto_authenc_keys keys;
        int ret;

        flow_log("%s() aead:%p key:%p keylen:%u\n", __func__, cipher, key,
                 keylen);
        flow_dump("  key: ", key, keylen);

        ret = crypto_authenc_extractkeys(&keys, key, keylen);
        if (ret)
                goto badkey;

        if (keys.enckeylen > MAX_KEY_SIZE ||
            keys.authkeylen > MAX_KEY_SIZE)
                goto badkey;

        ctx->enckeylen = keys.enckeylen;
        ctx->authkeylen = keys.authkeylen;

        memcpy(ctx->enckey, keys.enckey, keys.enckeylen);
        /* May end up padding auth key. So make sure it's zeroed. */
        memset(ctx->authkey, 0, sizeof(ctx->authkey));
        memcpy(ctx->authkey, keys.authkey, keys.authkeylen);

        switch (ctx->alg->cipher_info.alg) {
        case CIPHER_ALG_DES:
                if (verify_aead_des_key(cipher, keys.enckey, keys.enckeylen))
                        return -EINVAL;

                ctx->cipher_type = CIPHER_TYPE_DES;
                break;
        case CIPHER_ALG_3DES:
                if (verify_aead_des3_key(cipher, keys.enckey, keys.enckeylen))
                        return -EINVAL;

                ctx->cipher_type = CIPHER_TYPE_3DES;
                break;
        case CIPHER_ALG_AES:
                switch (ctx->enckeylen) {
                case AES_KEYSIZE_128:
                        ctx->cipher_type = CIPHER_TYPE_AES128;
                        break;
                case AES_KEYSIZE_192:
                        ctx->cipher_type = CIPHER_TYPE_AES192;
                        break;
                case AES_KEYSIZE_256:
                        ctx->cipher_type = CIPHER_TYPE_AES256;
                        break;
                default:
                        goto badkey;
                }
                break;
        default:
                pr_err("%s() Error: Unknown cipher alg\n", __func__);
                return -EINVAL;
        }

        flow_log("  enckeylen:%u authkeylen:%u\n", ctx->enckeylen,
                 ctx->authkeylen);
        flow_dump("  enc: ", ctx->enckey, ctx->enckeylen);
        flow_dump("  auth: ", ctx->authkey, ctx->authkeylen);

        /* setkey the fallback just in case we needto use it */
        if (ctx->fallback_cipher) {
                flow_log("  running fallback setkey()\n");

                ctx->fallback_cipher->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
                ctx->fallback_cipher->base.crt_flags |=
                    tfm->crt_flags & CRYPTO_TFM_REQ_MASK;
                ret = crypto_aead_setkey(ctx->fallback_cipher, key, keylen);
                if (ret)
                        flow_log("  fallback setkey() returned:%d\n", ret);
        }

        ctx->spu_resp_hdr_len = spu->spu_response_hdr_len(ctx->authkeylen,
                                                          ctx->enckeylen,
                                                          false);

        atomic_inc(&iproc_priv.setkey_cnt[SPU_OP_AEAD]);

        return ret;

badkey:
        ctx->enckeylen = 0;
        ctx->authkeylen = 0;
        ctx->digestsize = 0;

        return -EINVAL;
}

static int aead_gcm_ccm_setkey(struct crypto_aead *cipher,
                               const u8 *key, unsigned int keylen)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher);
        struct crypto_tfm *tfm = crypto_aead_tfm(cipher);

        int ret = 0;

        flow_log("%s() keylen:%u\n", __func__, keylen);
        flow_dump("  key: ", key, keylen);

        if (!ctx->is_esp)
                ctx->digestsize = keylen;

        ctx->enckeylen = keylen;
        ctx->authkeylen = 0;

        switch (ctx->enckeylen) {
        case AES_KEYSIZE_128:
                ctx->cipher_type = CIPHER_TYPE_AES128;
                break;
        case AES_KEYSIZE_192:
                ctx->cipher_type = CIPHER_TYPE_AES192;
                break;
        case AES_KEYSIZE_256:
                ctx->cipher_type = CIPHER_TYPE_AES256;
                break;
        default:
                goto badkey;
        }

        memcpy(ctx->enckey, key, ctx->enckeylen);

        flow_log("  enckeylen:%u authkeylen:%u\n", ctx->enckeylen,
                 ctx->authkeylen);
        flow_dump("  enc: ", ctx->enckey, ctx->enckeylen);
        flow_dump("  auth: ", ctx->authkey, ctx->authkeylen);

        /* setkey the fallback just in case we need to use it */
        if (ctx->fallback_cipher) {
                flow_log("  running fallback setkey()\n");

                ctx->fallback_cipher->base.crt_flags &= ~CRYPTO_TFM_REQ_MASK;
                ctx->fallback_cipher->base.crt_flags |=
                    tfm->crt_flags & CRYPTO_TFM_REQ_MASK;
                ret = crypto_aead_setkey(ctx->fallback_cipher, key,
                                         keylen + ctx->salt_len);
                if (ret)
                        flow_log("  fallback setkey() returned:%d\n", ret);
        }

        ctx->spu_resp_hdr_len = spu->spu_response_hdr_len(ctx->authkeylen,
                                                          ctx->enckeylen,
                                                          false);

        atomic_inc(&iproc_priv.setkey_cnt[SPU_OP_AEAD]);

        flow_log("  enckeylen:%u authkeylen:%u\n", ctx->enckeylen,
                 ctx->authkeylen);

        return ret;

badkey:
        ctx->enckeylen = 0;
        ctx->authkeylen = 0;
        ctx->digestsize = 0;

        return -EINVAL;
}

/**
 * aead_gcm_esp_setkey() - setkey() operation for ESP variant of GCM AES.
 * @cipher: AEAD structure
 * @key:    Key followed by 4 bytes of salt
 * @keylen: Length of key plus salt, in bytes
 *
 * Extracts salt from key and stores it to be prepended to IV on each request.
 * Digest is always 16 bytes
 *
 * Return: Value from generic gcm setkey.
 */
static int aead_gcm_esp_setkey(struct crypto_aead *cipher,
                               const u8 *key, unsigned int keylen)
{
        struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher);

        flow_log("%s\n", __func__);

        if (keylen < GCM_ESP_SALT_SIZE)
                return -EINVAL;

        ctx->salt_len = GCM_ESP_SALT_SIZE;
        ctx->salt_offset = GCM_ESP_SALT_OFFSET;
        memcpy(ctx->salt, key + keylen - GCM_ESP_SALT_SIZE, GCM_ESP_SALT_SIZE);
        keylen -= GCM_ESP_SALT_SIZE;
        ctx->digestsize = GCM_ESP_DIGESTSIZE;
        ctx->is_esp = true;
        flow_dump("salt: ", ctx->salt, GCM_ESP_SALT_SIZE);

        return aead_gcm_ccm_setkey(cipher, key, keylen);
}

/**
 * rfc4543_gcm_esp_setkey() - setkey operation for RFC4543 variant of GCM/GMAC.
 * @cipher: AEAD structure
 * @key:    Key followed by 4 bytes of salt
 * @keylen: Length of key plus salt, in bytes
 *
 * Extracts salt from key and stores it to be prepended to IV on each request.
 * Digest is always 16 bytes
 *
 * Return: Value from generic gcm setkey.
 */
static int rfc4543_gcm_esp_setkey(struct crypto_aead *cipher,
                                  const u8 *key, unsigned int keylen)
{
        struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher);

        flow_log("%s\n", __func__);

        if (keylen < GCM_ESP_SALT_SIZE)
                return -EINVAL;

        ctx->salt_len = GCM_ESP_SALT_SIZE;
        ctx->salt_offset = GCM_ESP_SALT_OFFSET;
        memcpy(ctx->salt, key + keylen - GCM_ESP_SALT_SIZE, GCM_ESP_SALT_SIZE);
        keylen -= GCM_ESP_SALT_SIZE;
        ctx->digestsize = GCM_ESP_DIGESTSIZE;
        ctx->is_esp = true;
        ctx->is_rfc4543 = true;
        flow_dump("salt: ", ctx->salt, GCM_ESP_SALT_SIZE);

        return aead_gcm_ccm_setkey(cipher, key, keylen);
}

/**
 * aead_ccm_esp_setkey() - setkey() operation for ESP variant of CCM AES.
 * @cipher: AEAD structure
 * @key:    Key followed by 4 bytes of salt
 * @keylen: Length of key plus salt, in bytes
 *
 * Extracts salt from key and stores it to be prepended to IV on each request.
 * Digest is always 16 bytes
 *
 * Return: Value from generic ccm setkey.
 */
static int aead_ccm_esp_setkey(struct crypto_aead *cipher,
                               const u8 *key, unsigned int keylen)
{
        struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher);

        flow_log("%s\n", __func__);

        if (keylen < CCM_ESP_SALT_SIZE)
                return -EINVAL;

        ctx->salt_len = CCM_ESP_SALT_SIZE;
        ctx->salt_offset = CCM_ESP_SALT_OFFSET;
        memcpy(ctx->salt, key + keylen - CCM_ESP_SALT_SIZE, CCM_ESP_SALT_SIZE);
        keylen -= CCM_ESP_SALT_SIZE;
        ctx->is_esp = true;
        flow_dump("salt: ", ctx->salt, CCM_ESP_SALT_SIZE);

        return aead_gcm_ccm_setkey(cipher, key, keylen);
}

static int aead_setauthsize(struct crypto_aead *cipher, unsigned int authsize)
{
        struct iproc_ctx_s *ctx = crypto_aead_ctx(cipher);
        int ret = 0;

        flow_log("%s() authkeylen:%u authsize:%u\n",
                 __func__, ctx->authkeylen, authsize);

        ctx->digestsize = authsize;

        /* setkey the fallback just in case we needto use it */
        if (ctx->fallback_cipher) {
                flow_log("  running fallback setauth()\n");

                ret = crypto_aead_setauthsize(ctx->fallback_cipher, authsize);
                if (ret)
                        flow_log("  fallback setauth() returned:%d\n", ret);
        }

        return ret;
}

static int aead_encrypt(struct aead_request *req)
{
        flow_log("%s() cryptlen:%u %08x\n", __func__, req->cryptlen,
                 req->cryptlen);
        dump_sg(req->src, 0, req->cryptlen + req->assoclen);
        flow_log("  assoc_len:%u\n", req->assoclen);

        return aead_enqueue(req, true);
}

static int aead_decrypt(struct aead_request *req)
{
        flow_log("%s() cryptlen:%u\n", __func__, req->cryptlen);
        dump_sg(req->src, 0, req->cryptlen + req->assoclen);
        flow_log("  assoc_len:%u\n", req->assoclen);

        return aead_enqueue(req, false);
}

/* ==================== Supported Cipher Algorithms ==================== */

static struct iproc_alg_s driver_algs[] = {
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "gcm(aes)",
                        .cra_driver_name = "gcm-aes-iproc",
                        .cra_blocksize = AES_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK
                 },
                 .setkey = aead_gcm_ccm_setkey,
                 .ivsize = GCM_AES_IV_SIZE,
                .maxauthsize = AES_BLOCK_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_AES,
                         .mode = CIPHER_MODE_GCM,
                         },
         .auth_info = {
                       .alg = HASH_ALG_AES,
                       .mode = HASH_MODE_GCM,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "ccm(aes)",
                        .cra_driver_name = "ccm-aes-iproc",
                        .cra_blocksize = AES_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK
                 },
                 .setkey = aead_gcm_ccm_setkey,
                 .ivsize = CCM_AES_IV_SIZE,
                .maxauthsize = AES_BLOCK_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_AES,
                         .mode = CIPHER_MODE_CCM,
                         },
         .auth_info = {
                       .alg = HASH_ALG_AES,
                       .mode = HASH_MODE_CCM,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "rfc4106(gcm(aes))",
                        .cra_driver_name = "gcm-aes-esp-iproc",
                        .cra_blocksize = AES_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK
                 },
                 .setkey = aead_gcm_esp_setkey,
                 .ivsize = GCM_RFC4106_IV_SIZE,
                 .maxauthsize = AES_BLOCK_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_AES,
                         .mode = CIPHER_MODE_GCM,
                         },
         .auth_info = {
                       .alg = HASH_ALG_AES,
                       .mode = HASH_MODE_GCM,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "rfc4309(ccm(aes))",
                        .cra_driver_name = "ccm-aes-esp-iproc",
                        .cra_blocksize = AES_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK
                 },
                 .setkey = aead_ccm_esp_setkey,
                 .ivsize = CCM_AES_IV_SIZE,
                 .maxauthsize = AES_BLOCK_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_AES,
                         .mode = CIPHER_MODE_CCM,
                         },
         .auth_info = {
                       .alg = HASH_ALG_AES,
                       .mode = HASH_MODE_CCM,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "rfc4543(gcm(aes))",
                        .cra_driver_name = "gmac-aes-esp-iproc",
                        .cra_blocksize = AES_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK
                 },
                 .setkey = rfc4543_gcm_esp_setkey,
                 .ivsize = GCM_RFC4106_IV_SIZE,
                 .maxauthsize = AES_BLOCK_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_AES,
                         .mode = CIPHER_MODE_GCM,
                         },
         .auth_info = {
                       .alg = HASH_ALG_AES,
                       .mode = HASH_MODE_GCM,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(md5),cbc(aes))",
                        .cra_driver_name = "authenc-hmac-md5-cbc-aes-iproc",
                        .cra_blocksize = AES_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                .ivsize = AES_BLOCK_SIZE,
                .maxauthsize = MD5_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_AES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_MD5,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(sha1),cbc(aes))",
                        .cra_driver_name = "authenc-hmac-sha1-cbc-aes-iproc",
                        .cra_blocksize = AES_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                 .ivsize = AES_BLOCK_SIZE,
                 .maxauthsize = SHA1_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_AES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA1,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(sha256),cbc(aes))",
                        .cra_driver_name = "authenc-hmac-sha256-cbc-aes-iproc",
                        .cra_blocksize = AES_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                 .ivsize = AES_BLOCK_SIZE,
                 .maxauthsize = SHA256_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_AES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA256,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(md5),cbc(des))",
                        .cra_driver_name = "authenc-hmac-md5-cbc-des-iproc",
                        .cra_blocksize = DES_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                 .ivsize = DES_BLOCK_SIZE,
                 .maxauthsize = MD5_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_DES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_MD5,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(sha1),cbc(des))",
                        .cra_driver_name = "authenc-hmac-sha1-cbc-des-iproc",
                        .cra_blocksize = DES_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                 .ivsize = DES_BLOCK_SIZE,
                 .maxauthsize = SHA1_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_DES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA1,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(sha224),cbc(des))",
                        .cra_driver_name = "authenc-hmac-sha224-cbc-des-iproc",
                        .cra_blocksize = DES_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                 .ivsize = DES_BLOCK_SIZE,
                 .maxauthsize = SHA224_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_DES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA224,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(sha256),cbc(des))",
                        .cra_driver_name = "authenc-hmac-sha256-cbc-des-iproc",
                        .cra_blocksize = DES_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                 .ivsize = DES_BLOCK_SIZE,
                 .maxauthsize = SHA256_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_DES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA256,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(sha384),cbc(des))",
                        .cra_driver_name = "authenc-hmac-sha384-cbc-des-iproc",
                        .cra_blocksize = DES_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                 .ivsize = DES_BLOCK_SIZE,
                 .maxauthsize = SHA384_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_DES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA384,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(sha512),cbc(des))",
                        .cra_driver_name = "authenc-hmac-sha512-cbc-des-iproc",
                        .cra_blocksize = DES_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                 .ivsize = DES_BLOCK_SIZE,
                 .maxauthsize = SHA512_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_DES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA512,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(md5),cbc(des3_ede))",
                        .cra_driver_name = "authenc-hmac-md5-cbc-des3-iproc",
                        .cra_blocksize = DES3_EDE_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                 .ivsize = DES3_EDE_BLOCK_SIZE,
                 .maxauthsize = MD5_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_3DES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_MD5,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(sha1),cbc(des3_ede))",
                        .cra_driver_name = "authenc-hmac-sha1-cbc-des3-iproc",
                        .cra_blocksize = DES3_EDE_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                 .ivsize = DES3_EDE_BLOCK_SIZE,
                 .maxauthsize = SHA1_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_3DES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA1,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(sha224),cbc(des3_ede))",
                        .cra_driver_name = "authenc-hmac-sha224-cbc-des3-iproc",
                        .cra_blocksize = DES3_EDE_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                 .ivsize = DES3_EDE_BLOCK_SIZE,
                 .maxauthsize = SHA224_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_3DES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA224,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(sha256),cbc(des3_ede))",
                        .cra_driver_name = "authenc-hmac-sha256-cbc-des3-iproc",
                        .cra_blocksize = DES3_EDE_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                 .ivsize = DES3_EDE_BLOCK_SIZE,
                 .maxauthsize = SHA256_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_3DES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA256,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(sha384),cbc(des3_ede))",
                        .cra_driver_name = "authenc-hmac-sha384-cbc-des3-iproc",
                        .cra_blocksize = DES3_EDE_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                 .ivsize = DES3_EDE_BLOCK_SIZE,
                 .maxauthsize = SHA384_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_3DES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA384,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },
        {
         .type = CRYPTO_ALG_TYPE_AEAD,
         .alg.aead = {
                 .base = {
                        .cra_name = "authenc(hmac(sha512),cbc(des3_ede))",
                        .cra_driver_name = "authenc-hmac-sha512-cbc-des3-iproc",
                        .cra_blocksize = DES3_EDE_BLOCK_SIZE,
                        .cra_flags = CRYPTO_ALG_NEED_FALLBACK |
                                     CRYPTO_ALG_ASYNC |
                                     CRYPTO_ALG_ALLOCATES_MEMORY
                 },
                 .setkey = aead_authenc_setkey,
                 .ivsize = DES3_EDE_BLOCK_SIZE,
                 .maxauthsize = SHA512_DIGEST_SIZE,
         },
         .cipher_info = {
                         .alg = CIPHER_ALG_3DES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA512,
                       .mode = HASH_MODE_HMAC,
                       },
         .auth_first = 0,
         },

/* SKCIPHER algorithms. */
        {
         .type = CRYPTO_ALG_TYPE_SKCIPHER,
         .alg.skcipher = {
                        .base.cra_name = "cbc(des)",
                        .base.cra_driver_name = "cbc-des-iproc",
                        .base.cra_blocksize = DES_BLOCK_SIZE,
                        .min_keysize = DES_KEY_SIZE,
                        .max_keysize = DES_KEY_SIZE,
                        .ivsize = DES_BLOCK_SIZE,
                        },
         .cipher_info = {
                         .alg = CIPHER_ALG_DES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_NONE,
                       .mode = HASH_MODE_NONE,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_SKCIPHER,
         .alg.skcipher = {
                        .base.cra_name = "ecb(des)",
                        .base.cra_driver_name = "ecb-des-iproc",
                        .base.cra_blocksize = DES_BLOCK_SIZE,
                        .min_keysize = DES_KEY_SIZE,
                        .max_keysize = DES_KEY_SIZE,
                        .ivsize = 0,
                        },
         .cipher_info = {
                         .alg = CIPHER_ALG_DES,
                         .mode = CIPHER_MODE_ECB,
                         },
         .auth_info = {
                       .alg = HASH_ALG_NONE,
                       .mode = HASH_MODE_NONE,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_SKCIPHER,
         .alg.skcipher = {
                        .base.cra_name = "cbc(des3_ede)",
                        .base.cra_driver_name = "cbc-des3-iproc",
                        .base.cra_blocksize = DES3_EDE_BLOCK_SIZE,
                        .min_keysize = DES3_EDE_KEY_SIZE,
                        .max_keysize = DES3_EDE_KEY_SIZE,
                        .ivsize = DES3_EDE_BLOCK_SIZE,
                        },
         .cipher_info = {
                         .alg = CIPHER_ALG_3DES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_NONE,
                       .mode = HASH_MODE_NONE,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_SKCIPHER,
         .alg.skcipher = {
                        .base.cra_name = "ecb(des3_ede)",
                        .base.cra_driver_name = "ecb-des3-iproc",
                        .base.cra_blocksize = DES3_EDE_BLOCK_SIZE,
                        .min_keysize = DES3_EDE_KEY_SIZE,
                        .max_keysize = DES3_EDE_KEY_SIZE,
                        .ivsize = 0,
                        },
         .cipher_info = {
                         .alg = CIPHER_ALG_3DES,
                         .mode = CIPHER_MODE_ECB,
                         },
         .auth_info = {
                       .alg = HASH_ALG_NONE,
                       .mode = HASH_MODE_NONE,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_SKCIPHER,
         .alg.skcipher = {
                        .base.cra_name = "cbc(aes)",
                        .base.cra_driver_name = "cbc-aes-iproc",
                        .base.cra_blocksize = AES_BLOCK_SIZE,
                        .min_keysize = AES_MIN_KEY_SIZE,
                        .max_keysize = AES_MAX_KEY_SIZE,
                        .ivsize = AES_BLOCK_SIZE,
                        },
         .cipher_info = {
                         .alg = CIPHER_ALG_AES,
                         .mode = CIPHER_MODE_CBC,
                         },
         .auth_info = {
                       .alg = HASH_ALG_NONE,
                       .mode = HASH_MODE_NONE,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_SKCIPHER,
         .alg.skcipher = {
                        .base.cra_name = "ecb(aes)",
                        .base.cra_driver_name = "ecb-aes-iproc",
                        .base.cra_blocksize = AES_BLOCK_SIZE,
                        .min_keysize = AES_MIN_KEY_SIZE,
                        .max_keysize = AES_MAX_KEY_SIZE,
                        .ivsize = 0,
                        },
         .cipher_info = {
                         .alg = CIPHER_ALG_AES,
                         .mode = CIPHER_MODE_ECB,
                         },
         .auth_info = {
                       .alg = HASH_ALG_NONE,
                       .mode = HASH_MODE_NONE,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_SKCIPHER,
         .alg.skcipher = {
                        .base.cra_name = "ctr(aes)",
                        .base.cra_driver_name = "ctr-aes-iproc",
                        .base.cra_blocksize = AES_BLOCK_SIZE,
                        .min_keysize = AES_MIN_KEY_SIZE,
                        .max_keysize = AES_MAX_KEY_SIZE,
                        .ivsize = AES_BLOCK_SIZE,
                        },
         .cipher_info = {
                         .alg = CIPHER_ALG_AES,
                         .mode = CIPHER_MODE_CTR,
                         },
         .auth_info = {
                       .alg = HASH_ALG_NONE,
                       .mode = HASH_MODE_NONE,
                       },
         },
{
         .type = CRYPTO_ALG_TYPE_SKCIPHER,
         .alg.skcipher = {
                        .base.cra_name = "xts(aes)",
                        .base.cra_driver_name = "xts-aes-iproc",
                        .base.cra_blocksize = AES_BLOCK_SIZE,
                        .min_keysize = 2 * AES_MIN_KEY_SIZE,
                        .max_keysize = 2 * AES_MAX_KEY_SIZE,
                        .ivsize = AES_BLOCK_SIZE,
                        },
         .cipher_info = {
                         .alg = CIPHER_ALG_AES,
                         .mode = CIPHER_MODE_XTS,
                         },
         .auth_info = {
                       .alg = HASH_ALG_NONE,
                       .mode = HASH_MODE_NONE,
                       },
         },

/* AHASH algorithms. */
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = MD5_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "md5",
                                    .cra_driver_name = "md5-iproc",
                                    .cra_blocksize = MD5_BLOCK_WORDS * 4,
                                    .cra_flags = CRYPTO_ALG_ASYNC |
                                                 CRYPTO_ALG_ALLOCATES_MEMORY,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_MD5,
                       .mode = HASH_MODE_HASH,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = MD5_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "hmac(md5)",
                                    .cra_driver_name = "hmac-md5-iproc",
                                    .cra_blocksize = MD5_BLOCK_WORDS * 4,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_MD5,
                       .mode = HASH_MODE_HMAC,
                       },
         },
        {.type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA1_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "sha1",
                                    .cra_driver_name = "sha1-iproc",
                                    .cra_blocksize = SHA1_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA1,
                       .mode = HASH_MODE_HASH,
                       },
         },
        {.type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA1_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "hmac(sha1)",
                                    .cra_driver_name = "hmac-sha1-iproc",
                                    .cra_blocksize = SHA1_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA1,
                       .mode = HASH_MODE_HMAC,
                       },
         },
        {.type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                        .halg.digestsize = SHA224_DIGEST_SIZE,
                        .halg.base = {
                                    .cra_name = "sha224",
                                    .cra_driver_name = "sha224-iproc",
                                    .cra_blocksize = SHA224_BLOCK_SIZE,
                        }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA224,
                       .mode = HASH_MODE_HASH,
                       },
         },
        {.type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA224_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "hmac(sha224)",
                                    .cra_driver_name = "hmac-sha224-iproc",
                                    .cra_blocksize = SHA224_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA224,
                       .mode = HASH_MODE_HMAC,
                       },
         },
        {.type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA256_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "sha256",
                                    .cra_driver_name = "sha256-iproc",
                                    .cra_blocksize = SHA256_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA256,
                       .mode = HASH_MODE_HASH,
                       },
         },
        {.type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA256_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "hmac(sha256)",
                                    .cra_driver_name = "hmac-sha256-iproc",
                                    .cra_blocksize = SHA256_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA256,
                       .mode = HASH_MODE_HMAC,
                       },
         },
        {
        .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA384_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "sha384",
                                    .cra_driver_name = "sha384-iproc",
                                    .cra_blocksize = SHA384_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA384,
                       .mode = HASH_MODE_HASH,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA384_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "hmac(sha384)",
                                    .cra_driver_name = "hmac-sha384-iproc",
                                    .cra_blocksize = SHA384_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA384,
                       .mode = HASH_MODE_HMAC,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA512_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "sha512",
                                    .cra_driver_name = "sha512-iproc",
                                    .cra_blocksize = SHA512_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA512,
                       .mode = HASH_MODE_HASH,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA512_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "hmac(sha512)",
                                    .cra_driver_name = "hmac-sha512-iproc",
                                    .cra_blocksize = SHA512_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA512,
                       .mode = HASH_MODE_HMAC,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA3_224_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "sha3-224",
                                    .cra_driver_name = "sha3-224-iproc",
                                    .cra_blocksize = SHA3_224_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA3_224,
                       .mode = HASH_MODE_HASH,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA3_224_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "hmac(sha3-224)",
                                    .cra_driver_name = "hmac-sha3-224-iproc",
                                    .cra_blocksize = SHA3_224_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA3_224,
                       .mode = HASH_MODE_HMAC
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA3_256_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "sha3-256",
                                    .cra_driver_name = "sha3-256-iproc",
                                    .cra_blocksize = SHA3_256_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA3_256,
                       .mode = HASH_MODE_HASH,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA3_256_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "hmac(sha3-256)",
                                    .cra_driver_name = "hmac-sha3-256-iproc",
                                    .cra_blocksize = SHA3_256_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA3_256,
                       .mode = HASH_MODE_HMAC,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA3_384_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "sha3-384",
                                    .cra_driver_name = "sha3-384-iproc",
                                    .cra_blocksize = SHA3_224_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA3_384,
                       .mode = HASH_MODE_HASH,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA3_384_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "hmac(sha3-384)",
                                    .cra_driver_name = "hmac-sha3-384-iproc",
                                    .cra_blocksize = SHA3_384_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA3_384,
                       .mode = HASH_MODE_HMAC,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA3_512_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "sha3-512",
                                    .cra_driver_name = "sha3-512-iproc",
                                    .cra_blocksize = SHA3_512_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA3_512,
                       .mode = HASH_MODE_HASH,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = SHA3_512_DIGEST_SIZE,
                      .halg.base = {
                                    .cra_name = "hmac(sha3-512)",
                                    .cra_driver_name = "hmac-sha3-512-iproc",
                                    .cra_blocksize = SHA3_512_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_SHA3_512,
                       .mode = HASH_MODE_HMAC,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = AES_BLOCK_SIZE,
                      .halg.base = {
                                    .cra_name = "xcbc(aes)",
                                    .cra_driver_name = "xcbc-aes-iproc",
                                    .cra_blocksize = AES_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_AES,
                       .mode = HASH_MODE_XCBC,
                       },
         },
        {
         .type = CRYPTO_ALG_TYPE_AHASH,
         .alg.hash = {
                      .halg.digestsize = AES_BLOCK_SIZE,
                      .halg.base = {
                                    .cra_name = "cmac(aes)",
                                    .cra_driver_name = "cmac-aes-iproc",
                                    .cra_blocksize = AES_BLOCK_SIZE,
                                }
                      },
         .cipher_info = {
                         .alg = CIPHER_ALG_NONE,
                         .mode = CIPHER_MODE_NONE,
                         },
         .auth_info = {
                       .alg = HASH_ALG_AES,
                       .mode = HASH_MODE_CMAC,
                       },
         },
};

static int generic_cra_init(struct crypto_tfm *tfm,
                            struct iproc_alg_s *cipher_alg)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct iproc_ctx_s *ctx = crypto_tfm_ctx(tfm);
        unsigned int blocksize = crypto_tfm_alg_blocksize(tfm);

        flow_log("%s()\n", __func__);

        ctx->alg = cipher_alg;
        ctx->cipher = cipher_alg->cipher_info;
        ctx->auth = cipher_alg->auth_info;
        ctx->auth_first = cipher_alg->auth_first;
        ctx->max_payload = spu->spu_ctx_max_payload(ctx->cipher.alg,
                                                    ctx->cipher.mode,
                                                    blocksize);
        ctx->fallback_cipher = NULL;

        ctx->enckeylen = 0;
        ctx->authkeylen = 0;

        atomic_inc(&iproc_priv.stream_count);
        atomic_inc(&iproc_priv.session_count);

        return 0;
}

static int skcipher_init_tfm(struct crypto_skcipher *skcipher)
{
        struct crypto_tfm *tfm = crypto_skcipher_tfm(skcipher);
        struct skcipher_alg *alg = crypto_skcipher_alg(skcipher);
        struct iproc_alg_s *cipher_alg;

        flow_log("%s()\n", __func__);

        crypto_skcipher_set_reqsize(skcipher, sizeof(struct iproc_reqctx_s));

        cipher_alg = container_of(alg, struct iproc_alg_s, alg.skcipher);
        return generic_cra_init(tfm, cipher_alg);
}

static int ahash_cra_init(struct crypto_tfm *tfm)
{
        int err;
        struct crypto_alg *alg = tfm->__crt_alg;
        struct iproc_alg_s *cipher_alg;

        cipher_alg = container_of(__crypto_ahash_alg(alg), struct iproc_alg_s,
                                  alg.hash);

        err = generic_cra_init(tfm, cipher_alg);
        flow_log("%s()\n", __func__);

        /*
         * export state size has to be < 512 bytes. So don't include msg bufs
         * in state size.
         */
        crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm),
                                 sizeof(struct iproc_reqctx_s));

        return err;
}

static int aead_cra_init(struct crypto_aead *aead)
{
        unsigned int reqsize = sizeof(struct iproc_reqctx_s);
        struct crypto_tfm *tfm = crypto_aead_tfm(aead);
        struct iproc_ctx_s *ctx = crypto_tfm_ctx(tfm);
        struct crypto_alg *alg = tfm->__crt_alg;
        struct aead_alg *aalg = container_of(alg, struct aead_alg, base);
        struct iproc_alg_s *cipher_alg = container_of(aalg, struct iproc_alg_s,
                                                      alg.aead);

        int err = generic_cra_init(tfm, cipher_alg);

        flow_log("%s()\n", __func__);

        ctx->is_esp = false;
        ctx->salt_len = 0;
        ctx->salt_offset = 0;

        /* random first IV */
        get_random_bytes(ctx->iv, MAX_IV_SIZE);
        flow_dump("  iv: ", ctx->iv, MAX_IV_SIZE);

        if (err)
                goto out;

        if (!(alg->cra_flags & CRYPTO_ALG_NEED_FALLBACK))
                goto reqsize;

        flow_log("%s() creating fallback cipher\n", __func__);

        ctx->fallback_cipher = crypto_alloc_aead(alg->cra_name, 0,
                                                 CRYPTO_ALG_ASYNC |
                                                 CRYPTO_ALG_NEED_FALLBACK);
        if (IS_ERR(ctx->fallback_cipher)) {
                pr_err("%s() Error: failed to allocate fallback for %s\n",
                       __func__, alg->cra_name);
                return PTR_ERR(ctx->fallback_cipher);
        }

        reqsize += crypto_aead_reqsize(ctx->fallback_cipher);

reqsize:
        crypto_aead_set_reqsize(aead, reqsize);

out:
        return err;
}

static void generic_cra_exit(struct crypto_tfm *tfm)
{
        atomic_dec(&iproc_priv.session_count);
}

static void skcipher_exit_tfm(struct crypto_skcipher *tfm)
{
        generic_cra_exit(crypto_skcipher_tfm(tfm));
}

static void aead_cra_exit(struct crypto_aead *aead)
{
        struct crypto_tfm *tfm = crypto_aead_tfm(aead);
        struct iproc_ctx_s *ctx = crypto_tfm_ctx(tfm);

        generic_cra_exit(tfm);

        if (ctx->fallback_cipher) {
                crypto_free_aead(ctx->fallback_cipher);
                ctx->fallback_cipher = NULL;
        }
}

/**
 * spu_functions_register() - Specify hardware-specific SPU functions based on
 * SPU type read from device tree.
 * @dev:        device structure
 * @spu_type:   SPU hardware generation
 * @spu_subtype: SPU hardware version
 */
static void spu_functions_register(struct device *dev,
                                   enum spu_spu_type spu_type,
                                   enum spu_spu_subtype spu_subtype)
{
        struct spu_hw *spu = &iproc_priv.spu;

        if (spu_type == SPU_TYPE_SPUM) {
                dev_dbg(dev, "Registering SPUM functions");
                spu->spu_dump_msg_hdr = spum_dump_msg_hdr;
                spu->spu_payload_length = spum_payload_length;
                spu->spu_response_hdr_len = spum_response_hdr_len;
                spu->spu_hash_pad_len = spum_hash_pad_len;
                spu->spu_gcm_ccm_pad_len = spum_gcm_ccm_pad_len;
                spu->spu_assoc_resp_len = spum_assoc_resp_len;
                spu->spu_aead_ivlen = spum_aead_ivlen;
                spu->spu_hash_type = spum_hash_type;
                spu->spu_digest_size = spum_digest_size;
                spu->spu_create_request = spum_create_request;
                spu->spu_cipher_req_init = spum_cipher_req_init;
                spu->spu_cipher_req_finish = spum_cipher_req_finish;
                spu->spu_request_pad = spum_request_pad;
                spu->spu_tx_status_len = spum_tx_status_len;
                spu->spu_rx_status_len = spum_rx_status_len;
                spu->spu_status_process = spum_status_process;
                spu->spu_xts_tweak_in_payload = spum_xts_tweak_in_payload;
                spu->spu_ccm_update_iv = spum_ccm_update_iv;
                spu->spu_wordalign_padlen = spum_wordalign_padlen;
                if (spu_subtype == SPU_SUBTYPE_SPUM_NS2)
                        spu->spu_ctx_max_payload = spum_ns2_ctx_max_payload;
                else
                        spu->spu_ctx_max_payload = spum_nsp_ctx_max_payload;
        } else {
                dev_dbg(dev, "Registering SPU2 functions");
                spu->spu_dump_msg_hdr = spu2_dump_msg_hdr;
                spu->spu_ctx_max_payload = spu2_ctx_max_payload;
                spu->spu_payload_length = spu2_payload_length;
                spu->spu_response_hdr_len = spu2_response_hdr_len;
                spu->spu_hash_pad_len = spu2_hash_pad_len;
                spu->spu_gcm_ccm_pad_len = spu2_gcm_ccm_pad_len;
                spu->spu_assoc_resp_len = spu2_assoc_resp_len;
                spu->spu_aead_ivlen = spu2_aead_ivlen;
                spu->spu_hash_type = spu2_hash_type;
                spu->spu_digest_size = spu2_digest_size;
                spu->spu_create_request = spu2_create_request;
                spu->spu_cipher_req_init = spu2_cipher_req_init;
                spu->spu_cipher_req_finish = spu2_cipher_req_finish;
                spu->spu_request_pad = spu2_request_pad;
                spu->spu_tx_status_len = spu2_tx_status_len;
                spu->spu_rx_status_len = spu2_rx_status_len;
                spu->spu_status_process = spu2_status_process;
                spu->spu_xts_tweak_in_payload = spu2_xts_tweak_in_payload;
                spu->spu_ccm_update_iv = spu2_ccm_update_iv;
                spu->spu_wordalign_padlen = spu2_wordalign_padlen;
        }
}

/**
 * spu_mb_init() - Initialize mailbox client. Request ownership of a mailbox
 * channel for the SPU being probed.
 * @dev:  SPU driver device structure
 *
 * Return: 0 if successful
 *         < 0 otherwise
 */
static int spu_mb_init(struct device *dev)
{
        struct mbox_client *mcl = &iproc_priv.mcl;
        int err, i;

        iproc_priv.mbox = devm_kcalloc(dev, iproc_priv.spu.num_chan,
                                  sizeof(struct mbox_chan *), GFP_KERNEL);
        if (!iproc_priv.mbox)
                return -ENOMEM;

        mcl->dev = dev;
        mcl->tx_block = false;
        mcl->tx_tout = 0;
        mcl->knows_txdone = true;
        mcl->rx_callback = spu_rx_callback;
        mcl->tx_done = NULL;

        for (i = 0; i < iproc_priv.spu.num_chan; i++) {
                iproc_priv.mbox[i] = mbox_request_channel(mcl, i);
                if (IS_ERR(iproc_priv.mbox[i])) {
                        err = PTR_ERR(iproc_priv.mbox[i]);
                        dev_err(dev,
                                "Mbox channel %d request failed with err %d",
                                i, err);
                        iproc_priv.mbox[i] = NULL;
                        goto free_channels;
                }
        }

        return 0;
free_channels:
        for (i = 0; i < iproc_priv.spu.num_chan; i++) {
                if (iproc_priv.mbox[i])
                        mbox_free_channel(iproc_priv.mbox[i]);
        }

        return err;
}

static void spu_mb_release(struct platform_device *pdev)
{
        int i;

        for (i = 0; i < iproc_priv.spu.num_chan; i++)
                mbox_free_channel(iproc_priv.mbox[i]);
}

static void spu_counters_init(void)
{
        int i;
        int j;

        atomic_set(&iproc_priv.session_count, 0);
        atomic_set(&iproc_priv.stream_count, 0);
        atomic_set(&iproc_priv.next_chan, (int)iproc_priv.spu.num_chan);
        atomic64_set(&iproc_priv.bytes_in, 0);
        atomic64_set(&iproc_priv.bytes_out, 0);
        for (i = 0; i < SPU_OP_NUM; i++) {
                atomic_set(&iproc_priv.op_counts[i], 0);
                atomic_set(&iproc_priv.setkey_cnt[i], 0);
        }
        for (i = 0; i < CIPHER_ALG_LAST; i++)
                for (j = 0; j < CIPHER_MODE_LAST; j++)
                        atomic_set(&iproc_priv.cipher_cnt[i][j], 0);

        for (i = 0; i < HASH_ALG_LAST; i++) {
                atomic_set(&iproc_priv.hash_cnt[i], 0);
                atomic_set(&iproc_priv.hmac_cnt[i], 0);
        }
        for (i = 0; i < AEAD_TYPE_LAST; i++)
                atomic_set(&iproc_priv.aead_cnt[i], 0);

        atomic_set(&iproc_priv.mb_no_spc, 0);
        atomic_set(&iproc_priv.mb_send_fail, 0);
        atomic_set(&iproc_priv.bad_icv, 0);
}

static int spu_register_skcipher(struct iproc_alg_s *driver_alg)
{
        struct skcipher_alg *crypto = &driver_alg->alg.skcipher;
        int err;

        crypto->base.cra_module = THIS_MODULE;
        crypto->base.cra_priority = cipher_pri;
        crypto->base.cra_alignmask = 0;
        crypto->base.cra_ctxsize = sizeof(struct iproc_ctx_s);
        crypto->base.cra_flags = CRYPTO_ALG_ASYNC |
                                 CRYPTO_ALG_ALLOCATES_MEMORY |
                                 CRYPTO_ALG_KERN_DRIVER_ONLY;

        crypto->init = skcipher_init_tfm;
        crypto->exit = skcipher_exit_tfm;
        crypto->setkey = skcipher_setkey;
        crypto->encrypt = skcipher_encrypt;
        crypto->decrypt = skcipher_decrypt;

        err = crypto_register_skcipher(crypto);
        /* Mark alg as having been registered, if successful */
        if (err == 0)
                driver_alg->registered = true;
        pr_debug("  registered skcipher %s\n", crypto->base.cra_driver_name);
        return err;
}

static int spu_register_ahash(struct iproc_alg_s *driver_alg)
{
        struct spu_hw *spu = &iproc_priv.spu;
        struct ahash_alg *hash = &driver_alg->alg.hash;
        int err;

        /* AES-XCBC is the only AES hash type currently supported on SPU-M */
        if ((driver_alg->auth_info.alg == HASH_ALG_AES) &&
            (driver_alg->auth_info.mode != HASH_MODE_XCBC) &&
            (spu->spu_type == SPU_TYPE_SPUM))
                return 0;

        /* SHA3 algorithm variants are not registered for SPU-M or SPU2. */
        if ((driver_alg->auth_info.alg >= HASH_ALG_SHA3_224) &&
            (spu->spu_subtype != SPU_SUBTYPE_SPU2_V2))
                return 0;

        hash->halg.base.cra_module = THIS_MODULE;
        hash->halg.base.cra_priority = hash_pri;
        hash->halg.base.cra_alignmask = 0;
        hash->halg.base.cra_ctxsize = sizeof(struct iproc_ctx_s);
        hash->halg.base.cra_init = ahash_cra_init;
        hash->halg.base.cra_exit = generic_cra_exit;
        hash->halg.base.cra_flags = CRYPTO_ALG_ASYNC |
                                    CRYPTO_ALG_ALLOCATES_MEMORY;
        hash->halg.statesize = sizeof(struct spu_hash_export_s);

        if (driver_alg->auth_info.mode != HASH_MODE_HMAC) {
                hash->init = ahash_init;
                hash->update = ahash_update;
                hash->final = ahash_final;
                hash->finup = ahash_finup;
                hash->digest = ahash_digest;
                if ((driver_alg->auth_info.alg == HASH_ALG_AES) &&
                    ((driver_alg->auth_info.mode == HASH_MODE_XCBC) ||
                    (driver_alg->auth_info.mode == HASH_MODE_CMAC))) {
                        hash->setkey = ahash_setkey;
                }
        } else {
                hash->setkey = ahash_hmac_setkey;
                hash->init = ahash_hmac_init;
                hash->update = ahash_hmac_update;
                hash->final = ahash_hmac_final;
                hash->finup = ahash_hmac_finup;
                hash->digest = ahash_hmac_digest;
        }
        hash->export = ahash_export;
        hash->import = ahash_import;

        err = crypto_register_ahash(hash);
        /* Mark alg as having been registered, if successful */
        if (err == 0)
                driver_alg->registered = true;
        pr_debug("  registered ahash %s\n",
                 hash->halg.base.cra_driver_name);
        return err;
}

static int spu_register_aead(struct iproc_alg_s *driver_alg)
{
        struct aead_alg *aead = &driver_alg->alg.aead;
        int err;

        aead->base.cra_module = THIS_MODULE;
        aead->base.cra_priority = aead_pri;
        aead->base.cra_alignmask = 0;
        aead->base.cra_ctxsize = sizeof(struct iproc_ctx_s);

        aead->base.cra_flags |= CRYPTO_ALG_ASYNC | CRYPTO_ALG_ALLOCATES_MEMORY;
        /* setkey set in alg initialization */
        aead->setauthsize = aead_setauthsize;
        aead->encrypt = aead_encrypt;
        aead->decrypt = aead_decrypt;
        aead->init = aead_cra_init;
        aead->exit = aead_cra_exit;

        err = crypto_register_aead(aead);
        /* Mark alg as having been registered, if successful */
        if (err == 0)
                driver_alg->registered = true;
        pr_debug("  registered aead %s\n", aead->base.cra_driver_name);
        return err;
}

/* register crypto algorithms the device supports */
static int spu_algs_register(struct device *dev)
{
        int i, j;
        int err;

        for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
                switch (driver_algs[i].type) {
                case CRYPTO_ALG_TYPE_SKCIPHER:
                        err = spu_register_skcipher(&driver_algs[i]);
                        break;
                case CRYPTO_ALG_TYPE_AHASH:
                        err = spu_register_ahash(&driver_algs[i]);
                        break;
                case CRYPTO_ALG_TYPE_AEAD:
                        err = spu_register_aead(&driver_algs[i]);
                        break;
                default:
                        dev_err(dev,
                                "iproc-crypto: unknown alg type: %d",
                                driver_algs[i].type);
                        err = -EINVAL;
                }

                if (err) {
                        dev_err(dev, "alg registration failed with error %d\n",
                                err);
                        goto err_algs;
                }
        }

        return 0;

err_algs:
        for (j = 0; j < i; j++) {
                /* Skip any algorithm not registered */
                if (!driver_algs[j].registered)
                        continue;
                switch (driver_algs[j].type) {
                case CRYPTO_ALG_TYPE_SKCIPHER:
                        crypto_unregister_skcipher(&driver_algs[j].alg.skcipher);
                        driver_algs[j].registered = false;
                        break;
                case CRYPTO_ALG_TYPE_AHASH:
                        crypto_unregister_ahash(&driver_algs[j].alg.hash);
                        driver_algs[j].registered = false;
                        break;
                case CRYPTO_ALG_TYPE_AEAD:
                        crypto_unregister_aead(&driver_algs[j].alg.aead);
                        driver_algs[j].registered = false;
                        break;
                }
        }
        return err;
}

/* ==================== Kernel Platform API ==================== */

static struct spu_type_subtype spum_ns2_types = {
        SPU_TYPE_SPUM, SPU_SUBTYPE_SPUM_NS2
};

static struct spu_type_subtype spum_nsp_types = {
        SPU_TYPE_SPUM, SPU_SUBTYPE_SPUM_NSP
};

static struct spu_type_subtype spu2_types = {
        SPU_TYPE_SPU2, SPU_SUBTYPE_SPU2_V1
};

static struct spu_type_subtype spu2_v2_types = {
        SPU_TYPE_SPU2, SPU_SUBTYPE_SPU2_V2
};

static const struct of_device_id bcm_spu_dt_ids[] = {
        {
                .compatible = "brcm,spum-crypto",
                .data = &spum_ns2_types,
        },
        {
                .compatible = "brcm,spum-nsp-crypto",
                .data = &spum_nsp_types,
        },
        {
                .compatible = "brcm,spu2-crypto",
                .data = &spu2_types,
        },
        {
                .compatible = "brcm,spu2-v2-crypto",
                .data = &spu2_v2_types,
        },
        { /* sentinel */ }
};

MODULE_DEVICE_TABLE(of, bcm_spu_dt_ids);

static int spu_dt_read(struct platform_device *pdev)
{
        struct device *dev = &pdev->dev;
        struct spu_hw *spu = &iproc_priv.spu;
        struct resource *spu_ctrl_regs;
        const struct spu_type_subtype *matched_spu_type;
        struct device_node *dn = pdev->dev.of_node;
        int err, i;

        /* Count number of mailbox channels */
        spu->num_chan = of_count_phandle_with_args(dn, "mboxes", "#mbox-cells");

        matched_spu_type = of_device_get_match_data(dev);
        if (!matched_spu_type) {
                dev_err(dev, "Failed to match device\n");
                return -ENODEV;
        }

        spu->spu_type = matched_spu_type->type;
        spu->spu_subtype = matched_spu_type->subtype;

        for (i = 0; (i < MAX_SPUS) && ((spu_ctrl_regs =
                platform_get_resource(pdev, IORESOURCE_MEM, i)) != NULL); i++) {

                spu->reg_vbase[i] = devm_ioremap_resource(dev, spu_ctrl_regs);
                if (IS_ERR(spu->reg_vbase[i])) {
                        err = PTR_ERR(spu->reg_vbase[i]);
                        dev_err(dev, "Failed to map registers: %d\n",
                                err);
                        spu->reg_vbase[i] = NULL;
                        return err;
                }
        }
        spu->num_spu = i;
        dev_dbg(dev, "Device has %d SPUs", spu->num_spu);

        return 0;
}

static int bcm_spu_probe(struct platform_device *pdev)
{
        struct device *dev = &pdev->dev;
        struct spu_hw *spu = &iproc_priv.spu;
        int err;

        iproc_priv.pdev  = pdev;
        platform_set_drvdata(iproc_priv.pdev,
                             &iproc_priv);

        err = spu_dt_read(pdev);
        if (err < 0)
                goto failure;

        err = spu_mb_init(dev);
        if (err < 0)
                goto failure;

        if (spu->spu_type == SPU_TYPE_SPUM)
                iproc_priv.bcm_hdr_len = 8;
        else if (spu->spu_type == SPU_TYPE_SPU2)
                iproc_priv.bcm_hdr_len = 0;

        spu_functions_register(dev, spu->spu_type, spu->spu_subtype);

        spu_counters_init();

        spu_setup_debugfs();

        err = spu_algs_register(dev);
        if (err < 0)
                goto fail_reg;

        return 0;

fail_reg:
        spu_free_debugfs();
failure:
        spu_mb_release(pdev);
        dev_err(dev, "%s failed with error %d.\n", __func__, err);

        return err;
}

static void bcm_spu_remove(struct platform_device *pdev)
{
        int i;
        struct device *dev = &pdev->dev;
        char *cdn;

        for (i = 0; i < ARRAY_SIZE(driver_algs); i++) {
                /*
                 * Not all algorithms were registered, depending on whether
                 * hardware is SPU or SPU2.  So here we make sure to skip
                 * those algorithms that were not previously registered.
                 */
                if (!driver_algs[i].registered)
                        continue;

                switch (driver_algs[i].type) {
                case CRYPTO_ALG_TYPE_SKCIPHER:
                        crypto_unregister_skcipher(&driver_algs[i].alg.skcipher);
                        dev_dbg(dev, "  unregistered cipher %s\n",
                                driver_algs[i].alg.skcipher.base.cra_driver_name);
                        driver_algs[i].registered = false;
                        break;
                case CRYPTO_ALG_TYPE_AHASH:
                        crypto_unregister_ahash(&driver_algs[i].alg.hash);
                        cdn = driver_algs[i].alg.hash.halg.base.cra_driver_name;
                        dev_dbg(dev, "  unregistered hash %s\n", cdn);
                        driver_algs[i].registered = false;
                        break;
                case CRYPTO_ALG_TYPE_AEAD:
                        crypto_unregister_aead(&driver_algs[i].alg.aead);
                        dev_dbg(dev, "  unregistered aead %s\n",
                                driver_algs[i].alg.aead.base.cra_driver_name);
                        driver_algs[i].registered = false;
                        break;
                }
        }
        spu_free_debugfs();
        spu_mb_release(pdev);
}

/* ===== Kernel Module API ===== */

static struct platform_driver bcm_spu_pdriver = {
        .driver = {
                   .name = "brcm-spu-crypto",
                   .of_match_table = of_match_ptr(bcm_spu_dt_ids),
                   },
        .probe = bcm_spu_probe,
        .remove = bcm_spu_remove,
};
module_platform_driver(bcm_spu_pdriver);

MODULE_AUTHOR("Rob Rice <rob.rice@broadcom.com>");
MODULE_DESCRIPTION("Broadcom symmetric crypto offload driver");
MODULE_LICENSE("GPL v2");