root/drivers/input/misc/iqs7222.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Azoteq IQS7222A/B/C/D Capacitive Touch Controller
 *
 * Copyright (C) 2022 Jeff LaBundy <jeff@labundy.com>
 */

#include <linux/bits.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/gpio/consumer.h>
#include <linux/i2c.h>
#include <linux/input.h>
#include <linux/input/touchscreen.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/ktime.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/property.h>
#include <linux/slab.h>
#include <linux/unaligned.h>

#define IQS7222_PROD_NUM                        0x00
#define IQS7222_PROD_NUM_A                      840
#define IQS7222_PROD_NUM_B                      698
#define IQS7222_PROD_NUM_C                      863
#define IQS7222_PROD_NUM_D                      1046

#define IQS7222_SYS_STATUS                      0x10
#define IQS7222_SYS_STATUS_RESET                BIT(3)
#define IQS7222_SYS_STATUS_ATI_ERROR            BIT(1)
#define IQS7222_SYS_STATUS_ATI_ACTIVE           BIT(0)

#define IQS7222_CHAN_SETUP_0_REF_MODE_MASK      GENMASK(15, 14)
#define IQS7222_CHAN_SETUP_0_REF_MODE_FOLLOW    BIT(15)
#define IQS7222_CHAN_SETUP_0_REF_MODE_REF       BIT(14)
#define IQS7222_CHAN_SETUP_0_CHAN_EN            BIT(8)

#define IQS7222_SLDR_SETUP_0_CHAN_CNT_MASK      GENMASK(2, 0)
#define IQS7222_SLDR_SETUP_2_RES_MASK           GENMASK(15, 8)
#define IQS7222_SLDR_SETUP_2_RES_SHIFT          8
#define IQS7222_SLDR_SETUP_2_TOP_SPEED_MASK     GENMASK(7, 0)

#define IQS7222_GPIO_SETUP_0_GPIO_EN            BIT(0)

#define IQS7222_SYS_SETUP                       0xD0
#define IQS7222_SYS_SETUP_INTF_MODE_MASK        GENMASK(7, 6)
#define IQS7222_SYS_SETUP_INTF_MODE_TOUCH       BIT(7)
#define IQS7222_SYS_SETUP_INTF_MODE_EVENT       BIT(6)
#define IQS7222_SYS_SETUP_PWR_MODE_MASK         GENMASK(5, 4)
#define IQS7222_SYS_SETUP_PWR_MODE_AUTO         IQS7222_SYS_SETUP_PWR_MODE_MASK
#define IQS7222_SYS_SETUP_REDO_ATI              BIT(2)
#define IQS7222_SYS_SETUP_ACK_RESET             BIT(0)

#define IQS7222_EVENT_MASK_ATI                  BIT(12)
#define IQS7222_EVENT_MASK_SLDR                 BIT(10)
#define IQS7222_EVENT_MASK_TPAD                 IQS7222_EVENT_MASK_SLDR
#define IQS7222_EVENT_MASK_TOUCH                BIT(1)
#define IQS7222_EVENT_MASK_PROX                 BIT(0)

#define IQS7222_COMMS_HOLD                      BIT(0)
#define IQS7222_COMMS_ERROR                     0xEEEE
#define IQS7222_COMMS_RETRY_MS                  50
#define IQS7222_COMMS_TIMEOUT_MS                100
#define IQS7222_RESET_TIMEOUT_MS                250
#define IQS7222_ATI_TIMEOUT_MS                  2000

#define IQS7222_MAX_COLS_STAT                   8
#define IQS7222_MAX_COLS_CYCLE                  3
#define IQS7222_MAX_COLS_GLBL                   3
#define IQS7222_MAX_COLS_BTN                    3
#define IQS7222_MAX_COLS_CHAN                   6
#define IQS7222_MAX_COLS_FILT                   2
#define IQS7222_MAX_COLS_SLDR                   11
#define IQS7222_MAX_COLS_TPAD                   24
#define IQS7222_MAX_COLS_GPIO                   3
#define IQS7222_MAX_COLS_SYS                    13

#define IQS7222_MAX_CHAN                        20
#define IQS7222_MAX_SLDR                        2

#define IQS7222_NUM_RETRIES                     5
#define IQS7222_REG_OFFSET                      0x100

enum iqs7222_reg_key_id {
        IQS7222_REG_KEY_NONE,
        IQS7222_REG_KEY_PROX,
        IQS7222_REG_KEY_TOUCH,
        IQS7222_REG_KEY_DEBOUNCE,
        IQS7222_REG_KEY_TAP,
        IQS7222_REG_KEY_TAP_LEGACY,
        IQS7222_REG_KEY_AXIAL,
        IQS7222_REG_KEY_AXIAL_LEGACY,
        IQS7222_REG_KEY_WHEEL,
        IQS7222_REG_KEY_NO_WHEEL,
        IQS7222_REG_KEY_RESERVED
};

enum iqs7222_reg_grp_id {
        IQS7222_REG_GRP_STAT,
        IQS7222_REG_GRP_CYCLE,
        IQS7222_REG_GRP_GLBL,
        IQS7222_REG_GRP_BTN,
        IQS7222_REG_GRP_CHAN,
        IQS7222_REG_GRP_FILT,
        IQS7222_REG_GRP_SLDR,
        IQS7222_REG_GRP_TPAD,
        IQS7222_REG_GRP_GPIO,
        IQS7222_REG_GRP_SYS,
        IQS7222_NUM_REG_GRPS
};

static const char * const iqs7222_reg_grp_names[IQS7222_NUM_REG_GRPS] = {
        [IQS7222_REG_GRP_CYCLE] = "cycle-%d",
        [IQS7222_REG_GRP_CHAN] = "channel-%d",
        [IQS7222_REG_GRP_SLDR] = "slider-%d",
        [IQS7222_REG_GRP_TPAD] = "trackpad",
        [IQS7222_REG_GRP_GPIO] = "gpio-%d",
};

static const unsigned int iqs7222_max_cols[IQS7222_NUM_REG_GRPS] = {
        [IQS7222_REG_GRP_STAT] = IQS7222_MAX_COLS_STAT,
        [IQS7222_REG_GRP_CYCLE] = IQS7222_MAX_COLS_CYCLE,
        [IQS7222_REG_GRP_GLBL] = IQS7222_MAX_COLS_GLBL,
        [IQS7222_REG_GRP_BTN] = IQS7222_MAX_COLS_BTN,
        [IQS7222_REG_GRP_CHAN] = IQS7222_MAX_COLS_CHAN,
        [IQS7222_REG_GRP_FILT] = IQS7222_MAX_COLS_FILT,
        [IQS7222_REG_GRP_SLDR] = IQS7222_MAX_COLS_SLDR,
        [IQS7222_REG_GRP_TPAD] = IQS7222_MAX_COLS_TPAD,
        [IQS7222_REG_GRP_GPIO] = IQS7222_MAX_COLS_GPIO,
        [IQS7222_REG_GRP_SYS] = IQS7222_MAX_COLS_SYS,
};

static const unsigned int iqs7222_gpio_links[] = { 2, 5, 6, };

struct iqs7222_event_desc {
        const char *name;
        u16 link;
        u16 mask;
        u16 val;
        u16 strict;
        u16 enable;
        enum iqs7222_reg_key_id reg_key;
};

static const struct iqs7222_event_desc iqs7222_kp_events[] = {
        {
                .name = "event-prox",
                .enable = IQS7222_EVENT_MASK_PROX,
                .reg_key = IQS7222_REG_KEY_PROX,
        },
        {
                .name = "event-touch",
                .enable = IQS7222_EVENT_MASK_TOUCH,
                .reg_key = IQS7222_REG_KEY_TOUCH,
        },
};

static const struct iqs7222_event_desc iqs7222_sl_events[] = {
        { .name = "event-press", },
        {
                .name = "event-tap",
                .mask = BIT(0),
                .val = BIT(0),
                .enable = BIT(0),
                .reg_key = IQS7222_REG_KEY_TAP,
        },
        {
                .name = "event-swipe-pos",
                .mask = BIT(5) | BIT(1),
                .val = BIT(1),
                .enable = BIT(1),
                .reg_key = IQS7222_REG_KEY_AXIAL,
        },
        {
                .name = "event-swipe-neg",
                .mask = BIT(5) | BIT(1),
                .val = BIT(5) | BIT(1),
                .enable = BIT(1),
                .reg_key = IQS7222_REG_KEY_AXIAL,
        },
        {
                .name = "event-flick-pos",
                .mask = BIT(5) | BIT(2),
                .val = BIT(2),
                .enable = BIT(2),
                .reg_key = IQS7222_REG_KEY_AXIAL,
        },
        {
                .name = "event-flick-neg",
                .mask = BIT(5) | BIT(2),
                .val = BIT(5) | BIT(2),
                .enable = BIT(2),
                .reg_key = IQS7222_REG_KEY_AXIAL,
        },
};

static const struct iqs7222_event_desc iqs7222_tp_events[] = {
        {
                .name = "event-press",
                .link = BIT(7),
        },
        {
                .name = "event-tap",
                .link = BIT(0),
                .mask = BIT(0),
                .val = BIT(0),
                .enable = BIT(0),
                .reg_key = IQS7222_REG_KEY_TAP,
        },
        {
                .name = "event-swipe-x-pos",
                .link = BIT(2),
                .mask = BIT(2) | BIT(1),
                .val = BIT(2),
                .strict = BIT(4),
                .enable = BIT(1),
                .reg_key = IQS7222_REG_KEY_AXIAL,
        },
        {
                .name = "event-swipe-y-pos",
                .link = BIT(3),
                .mask = BIT(3) | BIT(1),
                .val = BIT(3),
                .strict = BIT(3),
                .enable = BIT(1),
                .reg_key = IQS7222_REG_KEY_AXIAL,
        },
        {
                .name = "event-swipe-x-neg",
                .link = BIT(4),
                .mask = BIT(4) | BIT(1),
                .val = BIT(4),
                .strict = BIT(4),
                .enable = BIT(1),
                .reg_key = IQS7222_REG_KEY_AXIAL,
        },
        {
                .name = "event-swipe-y-neg",
                .link = BIT(5),
                .mask = BIT(5) | BIT(1),
                .val = BIT(5),
                .strict = BIT(3),
                .enable = BIT(1),
                .reg_key = IQS7222_REG_KEY_AXIAL,
        },
        {
                .name = "event-flick-x-pos",
                .link = BIT(2),
                .mask = BIT(2) | BIT(1),
                .val = BIT(2) | BIT(1),
                .strict = BIT(4),
                .enable = BIT(2),
                .reg_key = IQS7222_REG_KEY_AXIAL,
        },
        {
                .name = "event-flick-y-pos",
                .link = BIT(3),
                .mask = BIT(3) | BIT(1),
                .val = BIT(3) | BIT(1),
                .strict = BIT(3),
                .enable = BIT(2),
                .reg_key = IQS7222_REG_KEY_AXIAL,
        },
        {
                .name = "event-flick-x-neg",
                .link = BIT(4),
                .mask = BIT(4) | BIT(1),
                .val = BIT(4) | BIT(1),
                .strict = BIT(4),
                .enable = BIT(2),
                .reg_key = IQS7222_REG_KEY_AXIAL,
        },
        {
                .name = "event-flick-y-neg",
                .link = BIT(5),
                .mask = BIT(5) | BIT(1),
                .val = BIT(5) | BIT(1),
                .strict = BIT(3),
                .enable = BIT(2),
                .reg_key = IQS7222_REG_KEY_AXIAL,
        },
};

struct iqs7222_reg_grp_desc {
        u16 base;
        u16 val_len;
        int num_row;
        int num_col;
};

struct iqs7222_dev_desc {
        u16 prod_num;
        u16 fw_major;
        u16 fw_minor;
        u16 sldr_res;
        u16 touch_link;
        u16 wheel_enable;
        int allow_offset;
        int event_offset;
        int comms_offset;
        int ext_chan;
        bool legacy_gesture;
        struct iqs7222_reg_grp_desc reg_grps[IQS7222_NUM_REG_GRPS];
};

static const struct iqs7222_dev_desc iqs7222_devs[] = {
        {
                .prod_num = IQS7222_PROD_NUM_A,
                .fw_major = 1,
                .fw_minor = 13,
                .sldr_res = U8_MAX * 16,
                .touch_link = 1768,
                .allow_offset = 9,
                .event_offset = 10,
                .comms_offset = 12,
                .ext_chan = 10,
                .reg_grps = {
                        [IQS7222_REG_GRP_STAT] = {
                                .base = IQS7222_SYS_STATUS,
                                .num_row = 1,
                                .num_col = 8,
                        },
                        [IQS7222_REG_GRP_CYCLE] = {
                                .base = 0x8000,
                                .num_row = 7,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_GLBL] = {
                                .base = 0x8700,
                                .num_row = 1,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_BTN] = {
                                .base = 0x9000,
                                .num_row = 12,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_CHAN] = {
                                .base = 0xA000,
                                .num_row = 12,
                                .num_col = 6,
                        },
                        [IQS7222_REG_GRP_FILT] = {
                                .base = 0xAC00,
                                .val_len = 3,
                                .num_row = 1,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_SLDR] = {
                                .base = 0xB000,
                                .num_row = 2,
                                .num_col = 11,
                        },
                        [IQS7222_REG_GRP_GPIO] = {
                                .base = 0xC000,
                                .num_row = 1,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_SYS] = {
                                .base = IQS7222_SYS_SETUP,
                                .num_row = 1,
                                .num_col = 13,
                        },
                },
        },
        {
                .prod_num = IQS7222_PROD_NUM_A,
                .fw_major = 1,
                .fw_minor = 12,
                .sldr_res = U8_MAX * 16,
                .touch_link = 1768,
                .allow_offset = 9,
                .event_offset = 10,
                .comms_offset = 12,
                .ext_chan = 10,
                .legacy_gesture = true,
                .reg_grps = {
                        [IQS7222_REG_GRP_STAT] = {
                                .base = IQS7222_SYS_STATUS,
                                .num_row = 1,
                                .num_col = 8,
                        },
                        [IQS7222_REG_GRP_CYCLE] = {
                                .base = 0x8000,
                                .num_row = 7,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_GLBL] = {
                                .base = 0x8700,
                                .num_row = 1,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_BTN] = {
                                .base = 0x9000,
                                .num_row = 12,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_CHAN] = {
                                .base = 0xA000,
                                .num_row = 12,
                                .num_col = 6,
                        },
                        [IQS7222_REG_GRP_FILT] = {
                                .base = 0xAC00,
                                .val_len = 3,
                                .num_row = 1,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_SLDR] = {
                                .base = 0xB000,
                                .num_row = 2,
                                .num_col = 11,
                        },
                        [IQS7222_REG_GRP_GPIO] = {
                                .base = 0xC000,
                                .num_row = 1,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_SYS] = {
                                .base = IQS7222_SYS_SETUP,
                                .num_row = 1,
                                .num_col = 13,
                        },
                },
        },
        {
                .prod_num = IQS7222_PROD_NUM_B,
                .fw_major = 1,
                .fw_minor = 43,
                .event_offset = 10,
                .comms_offset = 11,
                .reg_grps = {
                        [IQS7222_REG_GRP_STAT] = {
                                .base = IQS7222_SYS_STATUS,
                                .num_row = 1,
                                .num_col = 6,
                        },
                        [IQS7222_REG_GRP_CYCLE] = {
                                .base = 0x8000,
                                .num_row = 10,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_GLBL] = {
                                .base = 0x8A00,
                                .num_row = 1,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_BTN] = {
                                .base = 0x9000,
                                .num_row = 20,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_CHAN] = {
                                .base = 0xB000,
                                .num_row = 20,
                                .num_col = 4,
                        },
                        [IQS7222_REG_GRP_FILT] = {
                                .base = 0xC400,
                                .val_len = 3,
                                .num_row = 1,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_SYS] = {
                                .base = IQS7222_SYS_SETUP,
                                .num_row = 1,
                                .num_col = 13,
                        },
                },
        },
        {
                .prod_num = IQS7222_PROD_NUM_B,
                .fw_major = 1,
                .fw_minor = 27,
                .reg_grps = {
                        [IQS7222_REG_GRP_STAT] = {
                                .base = IQS7222_SYS_STATUS,
                                .num_row = 1,
                                .num_col = 6,
                        },
                        [IQS7222_REG_GRP_CYCLE] = {
                                .base = 0x8000,
                                .num_row = 10,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_GLBL] = {
                                .base = 0x8A00,
                                .num_row = 1,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_BTN] = {
                                .base = 0x9000,
                                .num_row = 20,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_CHAN] = {
                                .base = 0xB000,
                                .num_row = 20,
                                .num_col = 4,
                        },
                        [IQS7222_REG_GRP_FILT] = {
                                .base = 0xC400,
                                .val_len = 3,
                                .num_row = 1,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_SYS] = {
                                .base = IQS7222_SYS_SETUP,
                                .num_row = 1,
                                .num_col = 10,
                        },
                },
        },
        {
                .prod_num = IQS7222_PROD_NUM_C,
                .fw_major = 2,
                .fw_minor = 6,
                .sldr_res = U16_MAX,
                .touch_link = 1686,
                .wheel_enable = BIT(3),
                .event_offset = 9,
                .comms_offset = 10,
                .reg_grps = {
                        [IQS7222_REG_GRP_STAT] = {
                                .base = IQS7222_SYS_STATUS,
                                .num_row = 1,
                                .num_col = 6,
                        },
                        [IQS7222_REG_GRP_CYCLE] = {
                                .base = 0x8000,
                                .num_row = 5,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_GLBL] = {
                                .base = 0x8500,
                                .num_row = 1,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_BTN] = {
                                .base = 0x9000,
                                .num_row = 10,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_CHAN] = {
                                .base = 0xA000,
                                .num_row = 10,
                                .num_col = 6,
                        },
                        [IQS7222_REG_GRP_FILT] = {
                                .base = 0xAA00,
                                .val_len = 3,
                                .num_row = 1,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_SLDR] = {
                                .base = 0xB000,
                                .num_row = 2,
                                .num_col = 10,
                        },
                        [IQS7222_REG_GRP_GPIO] = {
                                .base = 0xC000,
                                .num_row = 3,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_SYS] = {
                                .base = IQS7222_SYS_SETUP,
                                .num_row = 1,
                                .num_col = 12,
                        },
                },
        },
        {
                .prod_num = IQS7222_PROD_NUM_C,
                .fw_major = 1,
                .fw_minor = 13,
                .sldr_res = U16_MAX,
                .touch_link = 1674,
                .wheel_enable = BIT(3),
                .event_offset = 9,
                .comms_offset = 10,
                .reg_grps = {
                        [IQS7222_REG_GRP_STAT] = {
                                .base = IQS7222_SYS_STATUS,
                                .num_row = 1,
                                .num_col = 6,
                        },
                        [IQS7222_REG_GRP_CYCLE] = {
                                .base = 0x8000,
                                .num_row = 5,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_GLBL] = {
                                .base = 0x8500,
                                .num_row = 1,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_BTN] = {
                                .base = 0x9000,
                                .num_row = 10,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_CHAN] = {
                                .base = 0xA000,
                                .num_row = 10,
                                .num_col = 6,
                        },
                        [IQS7222_REG_GRP_FILT] = {
                                .base = 0xAA00,
                                .val_len = 3,
                                .num_row = 1,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_SLDR] = {
                                .base = 0xB000,
                                .num_row = 2,
                                .num_col = 10,
                        },
                        [IQS7222_REG_GRP_GPIO] = {
                                .base = 0xC000,
                                .num_row = 1,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_SYS] = {
                                .base = IQS7222_SYS_SETUP,
                                .num_row = 1,
                                .num_col = 11,
                        },
                },
        },
        {
                .prod_num = IQS7222_PROD_NUM_D,
                .fw_major = 1,
                .fw_minor = 2,
                .touch_link = 1770,
                .allow_offset = 9,
                .event_offset = 10,
                .comms_offset = 11,
                .reg_grps = {
                        [IQS7222_REG_GRP_STAT] = {
                                .base = IQS7222_SYS_STATUS,
                                .num_row = 1,
                                .num_col = 7,
                        },
                        [IQS7222_REG_GRP_CYCLE] = {
                                .base = 0x8000,
                                .num_row = 7,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_GLBL] = {
                                .base = 0x8700,
                                .num_row = 1,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_BTN] = {
                                .base = 0x9000,
                                .num_row = 14,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_CHAN] = {
                                .base = 0xA000,
                                .num_row = 14,
                                .num_col = 4,
                        },
                        [IQS7222_REG_GRP_FILT] = {
                                .base = 0xAE00,
                                .val_len = 3,
                                .num_row = 1,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_TPAD] = {
                                .base = 0xB000,
                                .num_row = 1,
                                .num_col = 24,
                        },
                        [IQS7222_REG_GRP_GPIO] = {
                                .base = 0xC000,
                                .num_row = 3,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_SYS] = {
                                .base = IQS7222_SYS_SETUP,
                                .num_row = 1,
                                .num_col = 12,
                        },
                },
        },
        {
                .prod_num = IQS7222_PROD_NUM_D,
                .fw_major = 1,
                .fw_minor = 1,
                .touch_link = 1774,
                .allow_offset = 9,
                .event_offset = 10,
                .comms_offset = 11,
                .reg_grps = {
                        [IQS7222_REG_GRP_STAT] = {
                                .base = IQS7222_SYS_STATUS,
                                .num_row = 1,
                                .num_col = 7,
                        },
                        [IQS7222_REG_GRP_CYCLE] = {
                                .base = 0x8000,
                                .num_row = 7,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_GLBL] = {
                                .base = 0x8700,
                                .num_row = 1,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_BTN] = {
                                .base = 0x9000,
                                .num_row = 14,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_CHAN] = {
                                .base = 0xA000,
                                .num_row = 14,
                                .num_col = 4,
                        },
                        [IQS7222_REG_GRP_FILT] = {
                                .base = 0xAE00,
                                .val_len = 3,
                                .num_row = 1,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_TPAD] = {
                                .base = 0xB000,
                                .num_row = 1,
                                .num_col = 24,
                        },
                        [IQS7222_REG_GRP_GPIO] = {
                                .base = 0xC000,
                                .num_row = 3,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_SYS] = {
                                .base = IQS7222_SYS_SETUP,
                                .num_row = 1,
                                .num_col = 12,
                        },
                },
        },
        {
                .prod_num = IQS7222_PROD_NUM_D,
                .fw_major = 0,
                .fw_minor = 37,
                .touch_link = 1770,
                .allow_offset = 9,
                .event_offset = 10,
                .comms_offset = 11,
                .reg_grps = {
                        [IQS7222_REG_GRP_STAT] = {
                                .base = IQS7222_SYS_STATUS,
                                .num_row = 1,
                                .num_col = 7,
                        },
                        [IQS7222_REG_GRP_CYCLE] = {
                                .base = 0x8000,
                                .num_row = 7,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_GLBL] = {
                                .base = 0x8700,
                                .num_row = 1,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_BTN] = {
                                .base = 0x9000,
                                .num_row = 14,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_CHAN] = {
                                .base = 0xA000,
                                .num_row = 14,
                                .num_col = 4,
                        },
                        [IQS7222_REG_GRP_FILT] = {
                                .base = 0xAE00,
                                .val_len = 3,
                                .num_row = 1,
                                .num_col = 2,
                        },
                        [IQS7222_REG_GRP_TPAD] = {
                                .base = 0xB000,
                                .num_row = 1,
                                .num_col = 24,
                        },
                        [IQS7222_REG_GRP_GPIO] = {
                                .base = 0xC000,
                                .num_row = 3,
                                .num_col = 3,
                        },
                        [IQS7222_REG_GRP_SYS] = {
                                .base = IQS7222_SYS_SETUP,
                                .num_row = 1,
                                .num_col = 12,
                        },
                },
        },
};

struct iqs7222_prop_desc {
        const char *name;
        enum iqs7222_reg_grp_id reg_grp;
        enum iqs7222_reg_key_id reg_key;
        int reg_offset;
        int reg_shift;
        int reg_width;
        int val_pitch;
        int val_min;
        int val_max;
        bool invert;
        const char *label;
};

static const struct iqs7222_prop_desc iqs7222_props[] = {
        {
                .name = "azoteq,conv-period",
                .reg_grp = IQS7222_REG_GRP_CYCLE,
                .reg_offset = 0,
                .reg_shift = 8,
                .reg_width = 8,
                .label = "conversion period",
        },
        {
                .name = "azoteq,conv-frac",
                .reg_grp = IQS7222_REG_GRP_CYCLE,
                .reg_offset = 0,
                .reg_shift = 0,
                .reg_width = 8,
                .label = "conversion frequency fractional divider",
        },
        {
                .name = "azoteq,rx-float-inactive",
                .reg_grp = IQS7222_REG_GRP_CYCLE,
                .reg_offset = 1,
                .reg_shift = 6,
                .reg_width = 1,
                .invert = true,
        },
        {
                .name = "azoteq,dead-time-enable",
                .reg_grp = IQS7222_REG_GRP_CYCLE,
                .reg_offset = 1,
                .reg_shift = 5,
                .reg_width = 1,
        },
        {
                .name = "azoteq,tx-freq-fosc",
                .reg_grp = IQS7222_REG_GRP_CYCLE,
                .reg_offset = 1,
                .reg_shift = 4,
                .reg_width = 1,
        },
        {
                .name = "azoteq,vbias-enable",
                .reg_grp = IQS7222_REG_GRP_CYCLE,
                .reg_offset = 1,
                .reg_shift = 3,
                .reg_width = 1,
        },
        {
                .name = "azoteq,sense-mode",
                .reg_grp = IQS7222_REG_GRP_CYCLE,
                .reg_offset = 1,
                .reg_shift = 0,
                .reg_width = 3,
                .val_max = 3,
                .label = "sensing mode",
        },
        {
                .name = "azoteq,iref-enable",
                .reg_grp = IQS7222_REG_GRP_CYCLE,
                .reg_offset = 2,
                .reg_shift = 10,
                .reg_width = 1,
        },
        {
                .name = "azoteq,iref-level",
                .reg_grp = IQS7222_REG_GRP_CYCLE,
                .reg_offset = 2,
                .reg_shift = 4,
                .reg_width = 4,
                .label = "current reference level",
        },
        {
                .name = "azoteq,iref-trim",
                .reg_grp = IQS7222_REG_GRP_CYCLE,
                .reg_offset = 2,
                .reg_shift = 0,
                .reg_width = 4,
                .label = "current reference trim",
        },
        {
                .name = "azoteq,max-counts",
                .reg_grp = IQS7222_REG_GRP_GLBL,
                .reg_offset = 0,
                .reg_shift = 13,
                .reg_width = 2,
                .label = "maximum counts",
        },
        {
                .name = "azoteq,auto-mode",
                .reg_grp = IQS7222_REG_GRP_GLBL,
                .reg_offset = 0,
                .reg_shift = 2,
                .reg_width = 2,
                .label = "number of conversions",
        },
        {
                .name = "azoteq,ati-frac-div-fine",
                .reg_grp = IQS7222_REG_GRP_GLBL,
                .reg_offset = 1,
                .reg_shift = 9,
                .reg_width = 5,
                .label = "ATI fine fractional divider",
        },
        {
                .name = "azoteq,ati-frac-div-coarse",
                .reg_grp = IQS7222_REG_GRP_GLBL,
                .reg_offset = 1,
                .reg_shift = 0,
                .reg_width = 5,
                .label = "ATI coarse fractional divider",
        },
        {
                .name = "azoteq,ati-comp-select",
                .reg_grp = IQS7222_REG_GRP_GLBL,
                .reg_offset = 2,
                .reg_shift = 0,
                .reg_width = 10,
                .label = "ATI compensation selection",
        },
        {
                .name = "azoteq,ati-band",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 0,
                .reg_shift = 12,
                .reg_width = 2,
                .label = "ATI band",
        },
        {
                .name = "azoteq,global-halt",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 0,
                .reg_shift = 11,
                .reg_width = 1,
        },
        {
                .name = "azoteq,invert-enable",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 0,
                .reg_shift = 10,
                .reg_width = 1,
        },
        {
                .name = "azoteq,dual-direction",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 0,
                .reg_shift = 9,
                .reg_width = 1,
        },
        {
                .name = "azoteq,samp-cap-double",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 0,
                .reg_shift = 3,
                .reg_width = 1,
        },
        {
                .name = "azoteq,vref-half",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 0,
                .reg_shift = 2,
                .reg_width = 1,
        },
        {
                .name = "azoteq,proj-bias",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 0,
                .reg_shift = 0,
                .reg_width = 2,
                .label = "projected bias current",
        },
        {
                .name = "azoteq,ati-target",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 1,
                .reg_shift = 8,
                .reg_width = 8,
                .val_pitch = 8,
                .label = "ATI target",
        },
        {
                .name = "azoteq,ati-base",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 1,
                .reg_shift = 3,
                .reg_width = 5,
                .val_pitch = 16,
                .label = "ATI base",
        },
        {
                .name = "azoteq,ati-mode",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 1,
                .reg_shift = 0,
                .reg_width = 3,
                .val_max = 5,
                .label = "ATI mode",
        },
        {
                .name = "azoteq,ati-frac-div-fine",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 2,
                .reg_shift = 9,
                .reg_width = 5,
                .label = "ATI fine fractional divider",
        },
        {
                .name = "azoteq,ati-frac-mult-coarse",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 2,
                .reg_shift = 5,
                .reg_width = 4,
                .label = "ATI coarse fractional multiplier",
        },
        {
                .name = "azoteq,ati-frac-div-coarse",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 2,
                .reg_shift = 0,
                .reg_width = 5,
                .label = "ATI coarse fractional divider",
        },
        {
                .name = "azoteq,ati-comp-div",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 3,
                .reg_shift = 11,
                .reg_width = 5,
                .label = "ATI compensation divider",
        },
        {
                .name = "azoteq,ati-comp-select",
                .reg_grp = IQS7222_REG_GRP_CHAN,
                .reg_offset = 3,
                .reg_shift = 0,
                .reg_width = 10,
                .label = "ATI compensation selection",
        },
        {
                .name = "azoteq,debounce-exit",
                .reg_grp = IQS7222_REG_GRP_BTN,
                .reg_key = IQS7222_REG_KEY_DEBOUNCE,
                .reg_offset = 0,
                .reg_shift = 12,
                .reg_width = 4,
                .label = "debounce exit factor",
        },
        {
                .name = "azoteq,debounce-enter",
                .reg_grp = IQS7222_REG_GRP_BTN,
                .reg_key = IQS7222_REG_KEY_DEBOUNCE,
                .reg_offset = 0,
                .reg_shift = 8,
                .reg_width = 4,
                .label = "debounce entrance factor",
        },
        {
                .name = "azoteq,thresh",
                .reg_grp = IQS7222_REG_GRP_BTN,
                .reg_key = IQS7222_REG_KEY_PROX,
                .reg_offset = 0,
                .reg_shift = 0,
                .reg_width = 8,
                .val_max = 127,
                .label = "threshold",
        },
        {
                .name = "azoteq,thresh",
                .reg_grp = IQS7222_REG_GRP_BTN,
                .reg_key = IQS7222_REG_KEY_TOUCH,
                .reg_offset = 1,
                .reg_shift = 0,
                .reg_width = 8,
                .label = "threshold",
        },
        {
                .name = "azoteq,hyst",
                .reg_grp = IQS7222_REG_GRP_BTN,
                .reg_key = IQS7222_REG_KEY_TOUCH,
                .reg_offset = 1,
                .reg_shift = 8,
                .reg_width = 8,
                .label = "hysteresis",
        },
        {
                .name = "azoteq,lta-beta-lp",
                .reg_grp = IQS7222_REG_GRP_FILT,
                .reg_offset = 0,
                .reg_shift = 12,
                .reg_width = 4,
                .label = "low-power mode long-term average beta",
        },
        {
                .name = "azoteq,lta-beta-np",
                .reg_grp = IQS7222_REG_GRP_FILT,
                .reg_offset = 0,
                .reg_shift = 8,
                .reg_width = 4,
                .label = "normal-power mode long-term average beta",
        },
        {
                .name = "azoteq,counts-beta-lp",
                .reg_grp = IQS7222_REG_GRP_FILT,
                .reg_offset = 0,
                .reg_shift = 4,
                .reg_width = 4,
                .label = "low-power mode counts beta",
        },
        {
                .name = "azoteq,counts-beta-np",
                .reg_grp = IQS7222_REG_GRP_FILT,
                .reg_offset = 0,
                .reg_shift = 0,
                .reg_width = 4,
                .label = "normal-power mode counts beta",
        },
        {
                .name = "azoteq,lta-fast-beta-lp",
                .reg_grp = IQS7222_REG_GRP_FILT,
                .reg_offset = 1,
                .reg_shift = 4,
                .reg_width = 4,
                .label = "low-power mode long-term average fast beta",
        },
        {
                .name = "azoteq,lta-fast-beta-np",
                .reg_grp = IQS7222_REG_GRP_FILT,
                .reg_offset = 1,
                .reg_shift = 0,
                .reg_width = 4,
                .label = "normal-power mode long-term average fast beta",
        },
        {
                .name = "azoteq,lower-cal",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_offset = 0,
                .reg_shift = 8,
                .reg_width = 8,
                .label = "lower calibration",
        },
        {
                .name = "azoteq,static-beta",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_key = IQS7222_REG_KEY_NO_WHEEL,
                .reg_offset = 0,
                .reg_shift = 6,
                .reg_width = 1,
        },
        {
                .name = "azoteq,bottom-beta",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_key = IQS7222_REG_KEY_NO_WHEEL,
                .reg_offset = 0,
                .reg_shift = 3,
                .reg_width = 3,
                .label = "bottom beta",
        },
        {
                .name = "azoteq,static-beta",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_key = IQS7222_REG_KEY_WHEEL,
                .reg_offset = 0,
                .reg_shift = 7,
                .reg_width = 1,
        },
        {
                .name = "azoteq,bottom-beta",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_key = IQS7222_REG_KEY_WHEEL,
                .reg_offset = 0,
                .reg_shift = 4,
                .reg_width = 3,
                .label = "bottom beta",
        },
        {
                .name = "azoteq,bottom-speed",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_offset = 1,
                .reg_shift = 8,
                .reg_width = 8,
                .label = "bottom speed",
        },
        {
                .name = "azoteq,upper-cal",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_offset = 1,
                .reg_shift = 0,
                .reg_width = 8,
                .label = "upper calibration",
        },
        {
                .name = "azoteq,gesture-max-ms",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_key = IQS7222_REG_KEY_TAP,
                .reg_offset = 9,
                .reg_shift = 8,
                .reg_width = 8,
                .val_pitch = 16,
                .label = "maximum gesture time",
        },
        {
                .name = "azoteq,gesture-max-ms",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_key = IQS7222_REG_KEY_TAP_LEGACY,
                .reg_offset = 9,
                .reg_shift = 8,
                .reg_width = 8,
                .val_pitch = 4,
                .label = "maximum gesture time",
        },
        {
                .name = "azoteq,gesture-min-ms",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_key = IQS7222_REG_KEY_TAP,
                .reg_offset = 9,
                .reg_shift = 3,
                .reg_width = 5,
                .val_pitch = 16,
                .label = "minimum gesture time",
        },
        {
                .name = "azoteq,gesture-min-ms",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_key = IQS7222_REG_KEY_TAP_LEGACY,
                .reg_offset = 9,
                .reg_shift = 3,
                .reg_width = 5,
                .val_pitch = 4,
                .label = "minimum gesture time",
        },
        {
                .name = "azoteq,gesture-dist",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_key = IQS7222_REG_KEY_AXIAL,
                .reg_offset = 10,
                .reg_shift = 8,
                .reg_width = 8,
                .val_pitch = 16,
                .label = "gesture distance",
        },
        {
                .name = "azoteq,gesture-dist",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_key = IQS7222_REG_KEY_AXIAL_LEGACY,
                .reg_offset = 10,
                .reg_shift = 8,
                .reg_width = 8,
                .val_pitch = 16,
                .label = "gesture distance",
        },
        {
                .name = "azoteq,gesture-max-ms",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_key = IQS7222_REG_KEY_AXIAL,
                .reg_offset = 10,
                .reg_shift = 0,
                .reg_width = 8,
                .val_pitch = 16,
                .label = "maximum gesture time",
        },
        {
                .name = "azoteq,gesture-max-ms",
                .reg_grp = IQS7222_REG_GRP_SLDR,
                .reg_key = IQS7222_REG_KEY_AXIAL_LEGACY,
                .reg_offset = 10,
                .reg_shift = 0,
                .reg_width = 8,
                .val_pitch = 4,
                .label = "maximum gesture time",
        },
        {
                .name = "azoteq,num-rows",
                .reg_grp = IQS7222_REG_GRP_TPAD,
                .reg_offset = 0,
                .reg_shift = 4,
                .reg_width = 4,
                .val_min = 1,
                .val_max = 12,
                .label = "number of rows",
        },
        {
                .name = "azoteq,num-cols",
                .reg_grp = IQS7222_REG_GRP_TPAD,
                .reg_offset = 0,
                .reg_shift = 0,
                .reg_width = 4,
                .val_min = 1,
                .val_max = 12,
                .label = "number of columns",
        },
        {
                .name = "azoteq,lower-cal-y",
                .reg_grp = IQS7222_REG_GRP_TPAD,
                .reg_offset = 1,
                .reg_shift = 8,
                .reg_width = 8,
                .label = "lower vertical calibration",
        },
        {
                .name = "azoteq,lower-cal-x",
                .reg_grp = IQS7222_REG_GRP_TPAD,
                .reg_offset = 1,
                .reg_shift = 0,
                .reg_width = 8,
                .label = "lower horizontal calibration",
        },
        {
                .name = "azoteq,upper-cal-y",
                .reg_grp = IQS7222_REG_GRP_TPAD,
                .reg_offset = 2,
                .reg_shift = 8,
                .reg_width = 8,
                .label = "upper vertical calibration",
        },
        {
                .name = "azoteq,upper-cal-x",
                .reg_grp = IQS7222_REG_GRP_TPAD,
                .reg_offset = 2,
                .reg_shift = 0,
                .reg_width = 8,
                .label = "upper horizontal calibration",
        },
        {
                .name = "azoteq,top-speed",
                .reg_grp = IQS7222_REG_GRP_TPAD,
                .reg_offset = 3,
                .reg_shift = 8,
                .reg_width = 8,
                .val_pitch = 4,
                .label = "top speed",
        },
        {
                .name = "azoteq,bottom-speed",
                .reg_grp = IQS7222_REG_GRP_TPAD,
                .reg_offset = 3,
                .reg_shift = 0,
                .reg_width = 8,
                .label = "bottom speed",
        },
        {
                .name = "azoteq,gesture-min-ms",
                .reg_grp = IQS7222_REG_GRP_TPAD,
                .reg_key = IQS7222_REG_KEY_TAP,
                .reg_offset = 20,
                .reg_shift = 8,
                .reg_width = 8,
                .val_pitch = 16,
                .label = "minimum gesture time",
        },
        {
                .name = "azoteq,gesture-max-ms",
                .reg_grp = IQS7222_REG_GRP_TPAD,
                .reg_key = IQS7222_REG_KEY_AXIAL,
                .reg_offset = 21,
                .reg_shift = 8,
                .reg_width = 8,
                .val_pitch = 16,
                .label = "maximum gesture time",
        },
        {
                .name = "azoteq,gesture-max-ms",
                .reg_grp = IQS7222_REG_GRP_TPAD,
                .reg_key = IQS7222_REG_KEY_TAP,
                .reg_offset = 21,
                .reg_shift = 0,
                .reg_width = 8,
                .val_pitch = 16,
                .label = "maximum gesture time",
        },
        {
                .name = "azoteq,gesture-dist",
                .reg_grp = IQS7222_REG_GRP_TPAD,
                .reg_key = IQS7222_REG_KEY_TAP,
                .reg_offset = 22,
                .reg_shift = 0,
                .reg_width = 16,
                .label = "gesture distance",
        },
        {
                .name = "azoteq,gesture-dist",
                .reg_grp = IQS7222_REG_GRP_TPAD,
                .reg_key = IQS7222_REG_KEY_AXIAL,
                .reg_offset = 23,
                .reg_shift = 0,
                .reg_width = 16,
                .label = "gesture distance",
        },
        {
                .name = "drive-open-drain",
                .reg_grp = IQS7222_REG_GRP_GPIO,
                .reg_offset = 0,
                .reg_shift = 1,
                .reg_width = 1,
        },
        {
                .name = "azoteq,timeout-ati-ms",
                .reg_grp = IQS7222_REG_GRP_SYS,
                .reg_offset = 1,
                .reg_shift = 0,
                .reg_width = 16,
                .val_pitch = 500,
                .label = "ATI error timeout",
        },
        {
                .name = "azoteq,rate-ati-ms",
                .reg_grp = IQS7222_REG_GRP_SYS,
                .reg_offset = 2,
                .reg_shift = 0,
                .reg_width = 16,
                .label = "ATI report rate",
        },
        {
                .name = "azoteq,timeout-np-ms",
                .reg_grp = IQS7222_REG_GRP_SYS,
                .reg_offset = 3,
                .reg_shift = 0,
                .reg_width = 16,
                .label = "normal-power mode timeout",
        },
        {
                .name = "azoteq,rate-np-ms",
                .reg_grp = IQS7222_REG_GRP_SYS,
                .reg_offset = 4,
                .reg_shift = 0,
                .reg_width = 16,
                .val_max = 3000,
                .label = "normal-power mode report rate",
        },
        {
                .name = "azoteq,timeout-lp-ms",
                .reg_grp = IQS7222_REG_GRP_SYS,
                .reg_offset = 5,
                .reg_shift = 0,
                .reg_width = 16,
                .label = "low-power mode timeout",
        },
        {
                .name = "azoteq,rate-lp-ms",
                .reg_grp = IQS7222_REG_GRP_SYS,
                .reg_offset = 6,
                .reg_shift = 0,
                .reg_width = 16,
                .val_max = 3000,
                .label = "low-power mode report rate",
        },
        {
                .name = "azoteq,timeout-ulp-ms",
                .reg_grp = IQS7222_REG_GRP_SYS,
                .reg_offset = 7,
                .reg_shift = 0,
                .reg_width = 16,
                .label = "ultra-low-power mode timeout",
        },
        {
                .name = "azoteq,rate-ulp-ms",
                .reg_grp = IQS7222_REG_GRP_SYS,
                .reg_offset = 8,
                .reg_shift = 0,
                .reg_width = 16,
                .val_max = 3000,
                .label = "ultra-low-power mode report rate",
        },
};

struct iqs7222_private {
        const struct iqs7222_dev_desc *dev_desc;
        struct gpio_desc *reset_gpio;
        struct gpio_desc *irq_gpio;
        struct i2c_client *client;
        struct input_dev *keypad;
        struct touchscreen_properties prop;
        unsigned int kp_type[IQS7222_MAX_CHAN][ARRAY_SIZE(iqs7222_kp_events)];
        unsigned int kp_code[IQS7222_MAX_CHAN][ARRAY_SIZE(iqs7222_kp_events)];
        unsigned int sl_code[IQS7222_MAX_SLDR][ARRAY_SIZE(iqs7222_sl_events)];
        unsigned int sl_axis[IQS7222_MAX_SLDR];
        unsigned int tp_code[ARRAY_SIZE(iqs7222_tp_events)];
        u16 cycle_setup[IQS7222_MAX_CHAN / 2][IQS7222_MAX_COLS_CYCLE];
        u16 glbl_setup[IQS7222_MAX_COLS_GLBL];
        u16 btn_setup[IQS7222_MAX_CHAN][IQS7222_MAX_COLS_BTN];
        u16 chan_setup[IQS7222_MAX_CHAN][IQS7222_MAX_COLS_CHAN];
        u16 filt_setup[IQS7222_MAX_COLS_FILT];
        u16 sldr_setup[IQS7222_MAX_SLDR][IQS7222_MAX_COLS_SLDR];
        u16 tpad_setup[IQS7222_MAX_COLS_TPAD];
        u16 gpio_setup[ARRAY_SIZE(iqs7222_gpio_links)][IQS7222_MAX_COLS_GPIO];
        u16 sys_setup[IQS7222_MAX_COLS_SYS];
};

static u16 *iqs7222_setup(struct iqs7222_private *iqs7222,
                          enum iqs7222_reg_grp_id reg_grp, int row)
{
        switch (reg_grp) {
        case IQS7222_REG_GRP_CYCLE:
                return iqs7222->cycle_setup[row];

        case IQS7222_REG_GRP_GLBL:
                return iqs7222->glbl_setup;

        case IQS7222_REG_GRP_BTN:
                return iqs7222->btn_setup[row];

        case IQS7222_REG_GRP_CHAN:
                return iqs7222->chan_setup[row];

        case IQS7222_REG_GRP_FILT:
                return iqs7222->filt_setup;

        case IQS7222_REG_GRP_SLDR:
                return iqs7222->sldr_setup[row];

        case IQS7222_REG_GRP_TPAD:
                return iqs7222->tpad_setup;

        case IQS7222_REG_GRP_GPIO:
                return iqs7222->gpio_setup[row];

        case IQS7222_REG_GRP_SYS:
                return iqs7222->sys_setup;

        default:
                return NULL;
        }
}

static int iqs7222_irq_poll(struct iqs7222_private *iqs7222, u16 timeout_ms)
{
        ktime_t irq_timeout = ktime_add_ms(ktime_get(), timeout_ms);
        int ret;

        do {
                usleep_range(1000, 1100);

                ret = gpiod_get_value_cansleep(iqs7222->irq_gpio);
                if (ret < 0)
                        return ret;
                else if (ret > 0)
                        return 0;
        } while (ktime_compare(ktime_get(), irq_timeout) < 0);

        return -EBUSY;
}

static int iqs7222_hard_reset(struct iqs7222_private *iqs7222)
{
        struct i2c_client *client = iqs7222->client;
        int error;

        if (!iqs7222->reset_gpio)
                return 0;

        gpiod_set_value_cansleep(iqs7222->reset_gpio, 1);
        usleep_range(1000, 1100);

        gpiod_set_value_cansleep(iqs7222->reset_gpio, 0);

        error = iqs7222_irq_poll(iqs7222, IQS7222_RESET_TIMEOUT_MS);
        if (error)
                dev_err(&client->dev, "Failed to reset device: %d\n", error);

        return error;
}

static int iqs7222_force_comms(struct iqs7222_private *iqs7222)
{
        u8 msg_buf[] = { 0xFF, };
        int ret;

        /*
         * The device cannot communicate until it asserts its interrupt (RDY)
         * pin. Attempts to do so while RDY is deasserted return an ACK; how-
         * ever all write data is ignored, and all read data returns 0xEE.
         *
         * Unsolicited communication must be preceded by a special force com-
         * munication command, after which the device eventually asserts its
         * RDY pin and agrees to communicate.
         *
         * Regardless of whether communication is forced or the result of an
         * interrupt, the device automatically deasserts its RDY pin once it
         * detects an I2C stop condition, or a timeout expires.
         */
        ret = gpiod_get_value_cansleep(iqs7222->irq_gpio);
        if (ret < 0)
                return ret;
        else if (ret > 0)
                return 0;

        ret = i2c_master_send(iqs7222->client, msg_buf, sizeof(msg_buf));
        if (ret < (int)sizeof(msg_buf)) {
                if (ret >= 0)
                        ret = -EIO;

                /*
                 * The datasheet states that the host must wait to retry any
                 * failed attempt to communicate over I2C.
                 */
                msleep(IQS7222_COMMS_RETRY_MS);
                return ret;
        }

        return iqs7222_irq_poll(iqs7222, IQS7222_COMMS_TIMEOUT_MS);
}

static int iqs7222_read_burst(struct iqs7222_private *iqs7222,
                              u16 reg, void *val, u16 val_len)
{
        u8 reg_buf[sizeof(__be16)];
        int ret, i;
        struct i2c_client *client = iqs7222->client;
        struct i2c_msg msg[] = {
                {
                        .addr = client->addr,
                        .flags = 0,
                        .len = reg > U8_MAX ? sizeof(reg) : sizeof(u8),
                        .buf = reg_buf,
                },
                {
                        .addr = client->addr,
                        .flags = I2C_M_RD,
                        .len = val_len,
                        .buf = (u8 *)val,
                },
        };

        if (reg > U8_MAX)
                put_unaligned_be16(reg, reg_buf);
        else
                *reg_buf = (u8)reg;

        /*
         * The following loop protects against an edge case in which the RDY
         * pin is automatically deasserted just as the read is initiated. In
         * that case, the read must be retried using forced communication.
         */
        for (i = 0; i < IQS7222_NUM_RETRIES; i++) {
                ret = iqs7222_force_comms(iqs7222);
                if (ret < 0)
                        continue;

                ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
                if (ret < (int)ARRAY_SIZE(msg)) {
                        if (ret >= 0)
                                ret = -EIO;

                        msleep(IQS7222_COMMS_RETRY_MS);
                        continue;
                }

                if (get_unaligned_le16(msg[1].buf) == IQS7222_COMMS_ERROR) {
                        ret = -ENODATA;
                        continue;
                }

                ret = 0;
                break;
        }

        /*
         * The following delay ensures the device has deasserted the RDY pin
         * following the I2C stop condition.
         */
        usleep_range(50, 100);

        if (ret < 0)
                dev_err(&client->dev,
                        "Failed to read from address 0x%04X: %d\n", reg, ret);

        return ret;
}

static int iqs7222_read_word(struct iqs7222_private *iqs7222, u16 reg, u16 *val)
{
        __le16 val_buf;
        int error;

        error = iqs7222_read_burst(iqs7222, reg, &val_buf, sizeof(val_buf));
        if (error)
                return error;

        *val = le16_to_cpu(val_buf);

        return 0;
}

static int iqs7222_write_burst(struct iqs7222_private *iqs7222,
                               u16 reg, const void *val, u16 val_len)
{
        int reg_len = reg > U8_MAX ? sizeof(reg) : sizeof(u8);
        int msg_len = reg_len + val_len;
        int ret, i;
        struct i2c_client *client = iqs7222->client;
        u8 *msg_buf;

        msg_buf = kzalloc(msg_len, GFP_KERNEL);
        if (!msg_buf)
                return -ENOMEM;

        if (reg > U8_MAX)
                put_unaligned_be16(reg, msg_buf);
        else
                *msg_buf = (u8)reg;

        memcpy(msg_buf + reg_len, val, val_len);

        /*
         * The following loop protects against an edge case in which the RDY
         * pin is automatically asserted just before the force communication
         * command is sent.
         *
         * In that case, the subsequent I2C stop condition tricks the device
         * into preemptively deasserting the RDY pin and the command must be
         * sent again.
         */
        for (i = 0; i < IQS7222_NUM_RETRIES; i++) {
                ret = iqs7222_force_comms(iqs7222);
                if (ret < 0)
                        continue;

                ret = i2c_master_send(client, msg_buf, msg_len);
                if (ret < msg_len) {
                        if (ret >= 0)
                                ret = -EIO;

                        msleep(IQS7222_COMMS_RETRY_MS);
                        continue;
                }

                ret = 0;
                break;
        }

        kfree(msg_buf);

        usleep_range(50, 100);

        if (ret < 0)
                dev_err(&client->dev,
                        "Failed to write to address 0x%04X: %d\n", reg, ret);

        return ret;
}

static int iqs7222_write_word(struct iqs7222_private *iqs7222, u16 reg, u16 val)
{
        __le16 val_buf = cpu_to_le16(val);

        return iqs7222_write_burst(iqs7222, reg, &val_buf, sizeof(val_buf));
}

static int iqs7222_ati_trigger(struct iqs7222_private *iqs7222)
{
        struct i2c_client *client = iqs7222->client;
        ktime_t ati_timeout;
        u16 sys_status = 0;
        u16 sys_setup;
        int error, i;

        /*
         * The reserved fields of the system setup register may have changed
         * as a result of other registers having been written. As such, read
         * the register's latest value to avoid unexpected behavior when the
         * register is written in the loop that follows.
         */
        error = iqs7222_read_word(iqs7222, IQS7222_SYS_SETUP, &sys_setup);
        if (error)
                return error;

        for (i = 0; i < IQS7222_NUM_RETRIES; i++) {
                /*
                 * Trigger ATI from streaming and normal-power modes so that
                 * the RDY pin continues to be asserted during ATI.
                 */
                error = iqs7222_write_word(iqs7222, IQS7222_SYS_SETUP,
                                           sys_setup |
                                           IQS7222_SYS_SETUP_REDO_ATI);
                if (error)
                        return error;

                ati_timeout = ktime_add_ms(ktime_get(), IQS7222_ATI_TIMEOUT_MS);

                do {
                        error = iqs7222_irq_poll(iqs7222,
                                                 IQS7222_COMMS_TIMEOUT_MS);
                        if (error)
                                continue;

                        error = iqs7222_read_word(iqs7222, IQS7222_SYS_STATUS,
                                                  &sys_status);
                        if (error)
                                return error;

                        if (sys_status & IQS7222_SYS_STATUS_RESET)
                                return 0;

                        if (sys_status & IQS7222_SYS_STATUS_ATI_ERROR)
                                break;

                        if (sys_status & IQS7222_SYS_STATUS_ATI_ACTIVE)
                                continue;

                        /*
                         * Use stream-in-touch mode if either slider reports
                         * absolute position.
                         */
                        sys_setup |= test_bit(EV_ABS, iqs7222->keypad->evbit)
                                   ? IQS7222_SYS_SETUP_INTF_MODE_TOUCH
                                   : IQS7222_SYS_SETUP_INTF_MODE_EVENT;
                        sys_setup |= IQS7222_SYS_SETUP_PWR_MODE_AUTO;

                        return iqs7222_write_word(iqs7222, IQS7222_SYS_SETUP,
                                                  sys_setup);
                } while (ktime_compare(ktime_get(), ati_timeout) < 0);

                dev_err(&client->dev,
                        "ATI attempt %d of %d failed with status 0x%02X, %s\n",
                        i + 1, IQS7222_NUM_RETRIES, (u8)sys_status,
                        i + 1 < IQS7222_NUM_RETRIES ? "retrying" : "stopping");
        }

        return -ETIMEDOUT;
}

static int iqs7222_dev_init(struct iqs7222_private *iqs7222, int dir)
{
        const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc;
        int comms_offset = dev_desc->comms_offset;
        int error, i, j, k;

        /*
         * Acknowledge reset before writing any registers in case the device
         * suffers a spurious reset during initialization.
         */
        if (dir == WRITE) {
                error = iqs7222_write_word(iqs7222, IQS7222_SYS_SETUP,
                                           iqs7222->sys_setup[0] |
                                           IQS7222_SYS_SETUP_ACK_RESET);
                if (error)
                        return error;
        }

        /*
         * Take advantage of the stop-bit disable function, if available, to
         * save the trouble of having to reopen a communication window after
         * each burst read or write.
         */
        if (comms_offset) {
                u16 comms_setup;

                error = iqs7222_read_word(iqs7222,
                                          IQS7222_SYS_SETUP + comms_offset,
                                          &comms_setup);
                if (error)
                        return error;

                error = iqs7222_write_word(iqs7222,
                                           IQS7222_SYS_SETUP + comms_offset,
                                           comms_setup | IQS7222_COMMS_HOLD);
                if (error)
                        return error;
        }

        for (i = 0; i < IQS7222_NUM_REG_GRPS; i++) {
                int num_row = dev_desc->reg_grps[i].num_row;
                int num_col = dev_desc->reg_grps[i].num_col;
                u16 reg = dev_desc->reg_grps[i].base;
                __le16 *val_buf;
                u16 val_len = dev_desc->reg_grps[i].val_len ? : num_col * sizeof(*val_buf);
                u16 *val;

                if (!num_col)
                        continue;

                val = iqs7222_setup(iqs7222, i, 0);
                if (!val)
                        continue;

                val_buf = kcalloc(num_col, sizeof(__le16), GFP_KERNEL);
                if (!val_buf)
                        return -ENOMEM;

                for (j = 0; j < num_row; j++) {
                        switch (dir) {
                        case READ:
                                error = iqs7222_read_burst(iqs7222, reg,
                                                           val_buf, val_len);
                                for (k = 0; k < num_col; k++)
                                        val[k] = le16_to_cpu(val_buf[k]);
                                break;

                        case WRITE:
                                for (k = 0; k < num_col; k++)
                                        val_buf[k] = cpu_to_le16(val[k]);
                                error = iqs7222_write_burst(iqs7222, reg,
                                                            val_buf, val_len);
                                break;

                        default:
                                error = -EINVAL;
                        }

                        if (error)
                                break;

                        reg += IQS7222_REG_OFFSET;
                        val += iqs7222_max_cols[i];
                }

                kfree(val_buf);

                if (error)
                        return error;
        }

        if (comms_offset) {
                u16 comms_setup;

                error = iqs7222_read_word(iqs7222,
                                          IQS7222_SYS_SETUP + comms_offset,
                                          &comms_setup);
                if (error)
                        return error;

                error = iqs7222_write_word(iqs7222,
                                           IQS7222_SYS_SETUP + comms_offset,
                                           comms_setup & ~IQS7222_COMMS_HOLD);
                if (error)
                        return error;
        }

        if (dir == READ) {
                iqs7222->sys_setup[0] &= ~IQS7222_SYS_SETUP_INTF_MODE_MASK;
                iqs7222->sys_setup[0] &= ~IQS7222_SYS_SETUP_PWR_MODE_MASK;
                return 0;
        }

        return iqs7222_ati_trigger(iqs7222);
}

static int iqs7222_dev_info(struct iqs7222_private *iqs7222)
{
        struct i2c_client *client = iqs7222->client;
        bool prod_num_valid = false;
        __le16 dev_id[3];
        int error, i;

        error = iqs7222_read_burst(iqs7222, IQS7222_PROD_NUM, dev_id,
                                   sizeof(dev_id));
        if (error)
                return error;

        for (i = 0; i < ARRAY_SIZE(iqs7222_devs); i++) {
                if (le16_to_cpu(dev_id[0]) != iqs7222_devs[i].prod_num)
                        continue;

                prod_num_valid = true;

                if (le16_to_cpu(dev_id[1]) < iqs7222_devs[i].fw_major)
                        continue;

                if (le16_to_cpu(dev_id[2]) < iqs7222_devs[i].fw_minor)
                        continue;

                iqs7222->dev_desc = &iqs7222_devs[i];
                return 0;
        }

        if (prod_num_valid)
                dev_err(&client->dev, "Unsupported firmware revision: %u.%u\n",
                        le16_to_cpu(dev_id[1]), le16_to_cpu(dev_id[2]));
        else
                dev_err(&client->dev, "Unrecognized product number: %u\n",
                        le16_to_cpu(dev_id[0]));

        return -EINVAL;
}

static int iqs7222_gpio_select(struct iqs7222_private *iqs7222,
                               struct fwnode_handle *child_node,
                               int child_enable, u16 child_link)
{
        const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc;
        struct i2c_client *client = iqs7222->client;
        int num_gpio = dev_desc->reg_grps[IQS7222_REG_GRP_GPIO].num_row;
        int error, count, i;
        unsigned int gpio_sel[ARRAY_SIZE(iqs7222_gpio_links)];

        if (!num_gpio)
                return 0;

        if (!fwnode_property_present(child_node, "azoteq,gpio-select"))
                return 0;

        count = fwnode_property_count_u32(child_node, "azoteq,gpio-select");
        if (count > num_gpio) {
                dev_err(&client->dev, "Invalid number of %s GPIOs\n",
                        fwnode_get_name(child_node));
                return -EINVAL;
        } else if (count < 0) {
                dev_err(&client->dev, "Failed to count %s GPIOs: %d\n",
                        fwnode_get_name(child_node), count);
                return count;
        }

        error = fwnode_property_read_u32_array(child_node,
                                               "azoteq,gpio-select",
                                               gpio_sel, count);
        if (error) {
                dev_err(&client->dev, "Failed to read %s GPIOs: %d\n",
                        fwnode_get_name(child_node), error);
                return error;
        }

        for (i = 0; i < count; i++) {
                u16 *gpio_setup;

                if (gpio_sel[i] >= num_gpio) {
                        dev_err(&client->dev, "Invalid %s GPIO: %u\n",
                                fwnode_get_name(child_node), gpio_sel[i]);
                        return -EINVAL;
                }

                gpio_setup = iqs7222->gpio_setup[gpio_sel[i]];

                if (gpio_setup[2] && child_link != gpio_setup[2]) {
                        dev_err(&client->dev,
                                "Conflicting GPIO %u event types\n",
                                gpio_sel[i]);
                        return -EINVAL;
                }

                gpio_setup[0] |= IQS7222_GPIO_SETUP_0_GPIO_EN;
                gpio_setup[1] |= child_enable;
                gpio_setup[2] = child_link;
        }

        return 0;
}

static int iqs7222_parse_props(struct iqs7222_private *iqs7222,
                               struct fwnode_handle *reg_grp_node,
                               int reg_grp_index,
                               enum iqs7222_reg_grp_id reg_grp,
                               enum iqs7222_reg_key_id reg_key)
{
        u16 *setup = iqs7222_setup(iqs7222, reg_grp, reg_grp_index);
        struct i2c_client *client = iqs7222->client;
        int i;

        if (!setup)
                return 0;

        for (i = 0; i < ARRAY_SIZE(iqs7222_props); i++) {
                const char *name = iqs7222_props[i].name;
                int reg_offset = iqs7222_props[i].reg_offset;
                int reg_shift = iqs7222_props[i].reg_shift;
                int reg_width = iqs7222_props[i].reg_width;
                int val_pitch = iqs7222_props[i].val_pitch ? : 1;
                int val_min = iqs7222_props[i].val_min;
                int val_max = iqs7222_props[i].val_max;
                bool invert = iqs7222_props[i].invert;
                const char *label = iqs7222_props[i].label ? : name;
                unsigned int val;
                int error;

                if (iqs7222_props[i].reg_grp != reg_grp ||
                    iqs7222_props[i].reg_key != reg_key)
                        continue;

                /*
                 * Boolean register fields are one bit wide; they are forcibly
                 * reset to provide a means to undo changes by a bootloader if
                 * necessary.
                 *
                 * Scalar fields, on the other hand, are left untouched unless
                 * their corresponding properties are present.
                 */
                if (reg_width == 1) {
                        if (invert)
                                setup[reg_offset] |= BIT(reg_shift);
                        else
                                setup[reg_offset] &= ~BIT(reg_shift);
                }

                if (!fwnode_property_present(reg_grp_node, name))
                        continue;

                if (reg_width == 1) {
                        if (invert)
                                setup[reg_offset] &= ~BIT(reg_shift);
                        else
                                setup[reg_offset] |= BIT(reg_shift);

                        continue;
                }

                error = fwnode_property_read_u32(reg_grp_node, name, &val);
                if (error) {
                        dev_err(&client->dev, "Failed to read %s %s: %d\n",
                                fwnode_get_name(reg_grp_node), label, error);
                        return error;
                }

                if (!val_max)
                        val_max = GENMASK(reg_width - 1, 0) * val_pitch;

                if (val < val_min || val > val_max) {
                        dev_err(&client->dev, "Invalid %s %s: %u\n",
                                fwnode_get_name(reg_grp_node), label, val);
                        return -EINVAL;
                }

                setup[reg_offset] &= ~GENMASK(reg_shift + reg_width - 1,
                                              reg_shift);
                setup[reg_offset] |= (val / val_pitch << reg_shift);
        }

        return 0;
}

static int iqs7222_parse_event(struct iqs7222_private *iqs7222,
                               struct fwnode_handle *event_node,
                               int reg_grp_index,
                               enum iqs7222_reg_grp_id reg_grp,
                               enum iqs7222_reg_key_id reg_key,
                               u16 event_enable, u16 event_link,
                               unsigned int *event_type,
                               unsigned int *event_code)
{
        struct i2c_client *client = iqs7222->client;
        int error;

        error = iqs7222_parse_props(iqs7222, event_node, reg_grp_index,
                                    reg_grp, reg_key);
        if (error)
                return error;

        error = iqs7222_gpio_select(iqs7222, event_node, event_enable,
                                    event_link);
        if (error)
                return error;

        error = fwnode_property_read_u32(event_node, "linux,code", event_code);
        if (error == -EINVAL) {
                return 0;
        } else if (error) {
                dev_err(&client->dev, "Failed to read %s code: %d\n",
                        fwnode_get_name(event_node), error);
                return error;
        }

        if (!event_type) {
                input_set_capability(iqs7222->keypad, EV_KEY, *event_code);
                return 0;
        }

        error = fwnode_property_read_u32(event_node, "linux,input-type",
                                         event_type);
        if (error == -EINVAL) {
                *event_type = EV_KEY;
        } else if (error) {
                dev_err(&client->dev, "Failed to read %s input type: %d\n",
                        fwnode_get_name(event_node), error);
                return error;
        } else if (*event_type != EV_KEY && *event_type != EV_SW) {
                dev_err(&client->dev, "Invalid %s input type: %d\n",
                        fwnode_get_name(event_node), *event_type);
                return -EINVAL;
        }

        input_set_capability(iqs7222->keypad, *event_type, *event_code);

        return 0;
}

static int iqs7222_parse_cycle(struct iqs7222_private *iqs7222,
                               struct fwnode_handle *cycle_node, int cycle_index)
{
        u16 *cycle_setup = iqs7222->cycle_setup[cycle_index];
        struct i2c_client *client = iqs7222->client;
        unsigned int pins[9];
        int error, count, i;

        /*
         * Each channel shares a cycle with one other channel; the mapping of
         * channels to cycles is fixed. Properties defined for a cycle impact
         * both channels tied to the cycle.
         *
         * Unlike channels which are restricted to a select range of CRx pins
         * based on channel number, any cycle can claim any of the device's 9
         * CTx pins (CTx0-8).
         */
        if (!fwnode_property_present(cycle_node, "azoteq,tx-enable"))
                return 0;

        count = fwnode_property_count_u32(cycle_node, "azoteq,tx-enable");
        if (count < 0) {
                dev_err(&client->dev, "Failed to count %s CTx pins: %d\n",
                        fwnode_get_name(cycle_node), count);
                return count;
        } else if (count > ARRAY_SIZE(pins)) {
                dev_err(&client->dev, "Invalid number of %s CTx pins\n",
                        fwnode_get_name(cycle_node));
                return -EINVAL;
        }

        error = fwnode_property_read_u32_array(cycle_node, "azoteq,tx-enable",
                                               pins, count);
        if (error) {
                dev_err(&client->dev, "Failed to read %s CTx pins: %d\n",
                        fwnode_get_name(cycle_node), error);
                return error;
        }

        cycle_setup[1] &= ~GENMASK(7 + ARRAY_SIZE(pins) - 1, 7);

        for (i = 0; i < count; i++) {
                if (pins[i] > 8) {
                        dev_err(&client->dev, "Invalid %s CTx pin: %u\n",
                                fwnode_get_name(cycle_node), pins[i]);
                        return -EINVAL;
                }

                cycle_setup[1] |= BIT(pins[i] + 7);
        }

        return 0;
}

static int iqs7222_parse_chan(struct iqs7222_private *iqs7222,
                              struct fwnode_handle *chan_node, int chan_index)
{
        const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc;
        struct i2c_client *client = iqs7222->client;
        int num_chan = dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_row;
        int ext_chan = dev_desc->ext_chan ? : num_chan;
        int error, i;
        u16 *chan_setup = iqs7222->chan_setup[chan_index];
        u16 *sys_setup = iqs7222->sys_setup;
        unsigned int val;

        if (dev_desc->allow_offset &&
            fwnode_property_present(chan_node, "azoteq,ulp-allow"))
                sys_setup[dev_desc->allow_offset] &= ~BIT(chan_index);

        chan_setup[0] |= IQS7222_CHAN_SETUP_0_CHAN_EN;

        /*
         * The reference channel function allows for differential measurements
         * and is only available in the case of IQS7222A or IQS7222C.
         */
        if (dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_col > 4 &&
            fwnode_property_present(chan_node, "azoteq,ref-select")) {
                u16 *ref_setup;

                error = fwnode_property_read_u32(chan_node, "azoteq,ref-select",
                                                 &val);
                if (error) {
                        dev_err(&client->dev,
                                "Failed to read %s reference channel: %d\n",
                                fwnode_get_name(chan_node), error);
                        return error;
                }

                if (val >= ext_chan) {
                        dev_err(&client->dev,
                                "Invalid %s reference channel: %u\n",
                                fwnode_get_name(chan_node), val);
                        return -EINVAL;
                }

                ref_setup = iqs7222->chan_setup[val];

                /*
                 * Configure the current channel as a follower of the selected
                 * reference channel.
                 */
                chan_setup[0] |= IQS7222_CHAN_SETUP_0_REF_MODE_FOLLOW;
                chan_setup[4] = val * 42 + 1048;

                error = fwnode_property_read_u32(chan_node, "azoteq,ref-weight",
                                                 &val);
                if (!error) {
                        if (val > U16_MAX) {
                                dev_err(&client->dev,
                                        "Invalid %s reference weight: %u\n",
                                        fwnode_get_name(chan_node), val);
                                return -EINVAL;
                        }

                        chan_setup[5] = val;
                } else if (error != -EINVAL) {
                        dev_err(&client->dev,
                                "Failed to read %s reference weight: %d\n",
                                fwnode_get_name(chan_node), error);
                        return error;
                }

                /*
                 * Configure the selected channel as a reference channel which
                 * serves the current channel.
                 */
                ref_setup[0] |= IQS7222_CHAN_SETUP_0_REF_MODE_REF;
                ref_setup[5] |= BIT(chan_index);

                ref_setup[4] = dev_desc->touch_link;
                if (fwnode_property_present(chan_node, "azoteq,use-prox"))
                        ref_setup[4] -= 2;
        } else if (dev_desc->reg_grps[IQS7222_REG_GRP_TPAD].num_row &&
                   fwnode_property_present(chan_node,
                                           "azoteq,counts-filt-enable")) {
                /*
                 * In the case of IQS7222D, however, the reference mode field
                 * is partially repurposed as a counts filter enable control.
                 */
                chan_setup[0] |= IQS7222_CHAN_SETUP_0_REF_MODE_REF;
        }

        if (fwnode_property_present(chan_node, "azoteq,rx-enable")) {
                /*
                 * Each channel can claim up to 4 CRx pins. The first half of
                 * the channels can use CRx0-3, while the second half can use
                 * CRx4-7.
                 */
                unsigned int pins[4];
                int count;

                count = fwnode_property_count_u32(chan_node,
                                                  "azoteq,rx-enable");
                if (count < 0) {
                        dev_err(&client->dev,
                                "Failed to count %s CRx pins: %d\n",
                                fwnode_get_name(chan_node), count);
                        return count;
                } else if (count > ARRAY_SIZE(pins)) {
                        dev_err(&client->dev,
                                "Invalid number of %s CRx pins\n",
                                fwnode_get_name(chan_node));
                        return -EINVAL;
                }

                error = fwnode_property_read_u32_array(chan_node,
                                                       "azoteq,rx-enable",
                                                       pins, count);
                if (error) {
                        dev_err(&client->dev,
                                "Failed to read %s CRx pins: %d\n",
                                fwnode_get_name(chan_node), error);
                        return error;
                }

                chan_setup[0] &= ~GENMASK(4 + ARRAY_SIZE(pins) - 1, 4);

                for (i = 0; i < count; i++) {
                        int min_crx = chan_index < ext_chan / 2 ? 0 : 4;

                        if (pins[i] < min_crx || pins[i] > min_crx + 3) {
                                dev_err(&client->dev,
                                        "Invalid %s CRx pin: %u\n",
                                        fwnode_get_name(chan_node), pins[i]);
                                return -EINVAL;
                        }

                        chan_setup[0] |= BIT(pins[i] + 4 - min_crx);
                }
        }

        for (i = 0; i < ARRAY_SIZE(iqs7222_kp_events); i++) {
                const char *event_name = iqs7222_kp_events[i].name;
                u16 event_enable = iqs7222_kp_events[i].enable;

                struct fwnode_handle *event_node __free(fwnode_handle) =
                        fwnode_get_named_child_node(chan_node, event_name);
                if (!event_node)
                        continue;

                error = fwnode_property_read_u32(event_node,
                                                 "azoteq,timeout-press-ms",
                                                 &val);
                if (!error) {
                        /*
                         * The IQS7222B employs a global pair of press timeout
                         * registers as opposed to channel-specific registers.
                         */
                        u16 *setup = dev_desc->reg_grps
                                     [IQS7222_REG_GRP_BTN].num_col > 2 ?
                                     &iqs7222->btn_setup[chan_index][2] :
                                     &sys_setup[9];

                        if (val > U8_MAX * 500) {
                                dev_err(&client->dev,
                                        "Invalid %s press timeout: %u\n",
                                        fwnode_get_name(event_node), val);
                                return -EINVAL;
                        }

                        *setup &= ~(U8_MAX << i * 8);
                        *setup |= (val / 500 << i * 8);
                } else if (error != -EINVAL) {
                        dev_err(&client->dev,
                                "Failed to read %s press timeout: %d\n",
                                fwnode_get_name(event_node), error);
                        return error;
                }

                error = iqs7222_parse_event(iqs7222, event_node, chan_index,
                                            IQS7222_REG_GRP_BTN,
                                            iqs7222_kp_events[i].reg_key,
                                            BIT(chan_index),
                                            dev_desc->touch_link - (i ? 0 : 2),
                                            &iqs7222->kp_type[chan_index][i],
                                            &iqs7222->kp_code[chan_index][i]);
                if (error)
                        return error;

                if (!iqs7222->kp_type[chan_index][i])
                        continue;

                if (!dev_desc->event_offset)
                        continue;

                sys_setup[dev_desc->event_offset] |= event_enable;
        }

        /*
         * The following call handles a special pair of properties that apply
         * to a channel node, but reside within the button (event) group.
         */
        return iqs7222_parse_props(iqs7222, chan_node, chan_index,
                                   IQS7222_REG_GRP_BTN,
                                   IQS7222_REG_KEY_DEBOUNCE);
}

static int iqs7222_parse_sldr(struct iqs7222_private *iqs7222,
                              struct fwnode_handle *sldr_node, int sldr_index)
{
        const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc;
        struct i2c_client *client = iqs7222->client;
        int num_chan = dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_row;
        int ext_chan = dev_desc->ext_chan ? : num_chan;
        int count, error, reg_offset, i;
        u16 *event_mask = &iqs7222->sys_setup[dev_desc->event_offset];
        u16 *sldr_setup = iqs7222->sldr_setup[sldr_index];
        unsigned int chan_sel[4], val;

        /*
         * Each slider can be spread across 3 to 4 channels. It is possible to
         * select only 2 channels, but doing so prevents the slider from using
         * the specified resolution.
         */
        count = fwnode_property_count_u32(sldr_node, "azoteq,channel-select");
        if (count < 0) {
                dev_err(&client->dev, "Failed to count %s channels: %d\n",
                        fwnode_get_name(sldr_node), count);
                return count;
        } else if (count < 3 || count > ARRAY_SIZE(chan_sel)) {
                dev_err(&client->dev, "Invalid number of %s channels\n",
                        fwnode_get_name(sldr_node));
                return -EINVAL;
        }

        error = fwnode_property_read_u32_array(sldr_node,
                                               "azoteq,channel-select",
                                               chan_sel, count);
        if (error) {
                dev_err(&client->dev, "Failed to read %s channels: %d\n",
                        fwnode_get_name(sldr_node), error);
                return error;
        }

        /*
         * Resolution and top speed, if small enough, are packed into a single
         * register. Otherwise, each occupies its own register and the rest of
         * the slider-related register addresses are offset by one.
         */
        reg_offset = dev_desc->sldr_res < U16_MAX ? 0 : 1;

        sldr_setup[0] |= count;
        sldr_setup[3 + reg_offset] &= ~GENMASK(ext_chan - 1, 0);

        for (i = 0; i < ARRAY_SIZE(chan_sel); i++) {
                sldr_setup[5 + reg_offset + i] = 0;
                if (i >= count)
                        continue;

                if (chan_sel[i] >= ext_chan) {
                        dev_err(&client->dev, "Invalid %s channel: %u\n",
                                fwnode_get_name(sldr_node), chan_sel[i]);
                        return -EINVAL;
                }

                /*
                 * The following fields indicate which channels participate in
                 * the slider, as well as each channel's relative placement.
                 */
                sldr_setup[3 + reg_offset] |= BIT(chan_sel[i]);
                sldr_setup[5 + reg_offset + i] = chan_sel[i] * 42 + 1080;
        }

        sldr_setup[4 + reg_offset] = dev_desc->touch_link;
        if (fwnode_property_present(sldr_node, "azoteq,use-prox"))
                sldr_setup[4 + reg_offset] -= 2;

        error = fwnode_property_read_u32(sldr_node, "azoteq,slider-size", &val);
        if (!error) {
                if (val > dev_desc->sldr_res) {
                        dev_err(&client->dev, "Invalid %s size: %u\n",
                                fwnode_get_name(sldr_node), val);
                        return -EINVAL;
                }

                if (reg_offset) {
                        sldr_setup[3] = val;
                } else {
                        sldr_setup[2] &= ~IQS7222_SLDR_SETUP_2_RES_MASK;
                        sldr_setup[2] |= (val / 16 <<
                                          IQS7222_SLDR_SETUP_2_RES_SHIFT);
                }
        } else if (error != -EINVAL) {
                dev_err(&client->dev, "Failed to read %s size: %d\n",
                        fwnode_get_name(sldr_node), error);
                return error;
        }

        if (!(reg_offset ? sldr_setup[3]
                         : sldr_setup[2] & IQS7222_SLDR_SETUP_2_RES_MASK)) {
                dev_err(&client->dev, "Undefined %s size\n",
                        fwnode_get_name(sldr_node));
                return -EINVAL;
        }

        error = fwnode_property_read_u32(sldr_node, "azoteq,top-speed", &val);
        if (!error) {
                if (val > (reg_offset ? U16_MAX : U8_MAX * 4)) {
                        dev_err(&client->dev, "Invalid %s top speed: %u\n",
                                fwnode_get_name(sldr_node), val);
                        return -EINVAL;
                }

                if (reg_offset) {
                        sldr_setup[2] = val;
                } else {
                        sldr_setup[2] &= ~IQS7222_SLDR_SETUP_2_TOP_SPEED_MASK;
                        sldr_setup[2] |= (val / 4);
                }
        } else if (error != -EINVAL) {
                dev_err(&client->dev, "Failed to read %s top speed: %d\n",
                        fwnode_get_name(sldr_node), error);
                return error;
        }

        error = fwnode_property_read_u32(sldr_node, "linux,axis", &val);
        if (!error) {
                u16 sldr_max = sldr_setup[3] - 1;

                if (!reg_offset) {
                        sldr_max = sldr_setup[2];

                        sldr_max &= IQS7222_SLDR_SETUP_2_RES_MASK;
                        sldr_max >>= IQS7222_SLDR_SETUP_2_RES_SHIFT;

                        sldr_max = sldr_max * 16 - 1;
                }

                input_set_abs_params(iqs7222->keypad, val, 0, sldr_max, 0, 0);
                iqs7222->sl_axis[sldr_index] = val;
        } else if (error != -EINVAL) {
                dev_err(&client->dev, "Failed to read %s axis: %d\n",
                        fwnode_get_name(sldr_node), error);
                return error;
        }

        if (dev_desc->wheel_enable) {
                sldr_setup[0] &= ~dev_desc->wheel_enable;
                if (iqs7222->sl_axis[sldr_index] == ABS_WHEEL)
                        sldr_setup[0] |= dev_desc->wheel_enable;
        }

        /*
         * The absence of a register offset makes it safe to assume the device
         * supports gestures, each of which is first disabled until explicitly
         * enabled.
         */
        if (!reg_offset)
                for (i = 0; i < ARRAY_SIZE(iqs7222_sl_events); i++)
                        sldr_setup[9] &= ~iqs7222_sl_events[i].enable;

        for (i = 0; i < ARRAY_SIZE(iqs7222_sl_events); i++) {
                const char *event_name = iqs7222_sl_events[i].name;
                enum iqs7222_reg_key_id reg_key;

                struct fwnode_handle *event_node __free(fwnode_handle) =
                        fwnode_get_named_child_node(sldr_node, event_name);
                if (!event_node)
                        continue;

                /*
                 * Depending on the device, gestures are either offered using
                 * one of two timing resolutions, or are not supported at all.
                 */
                if (reg_offset)
                        reg_key = IQS7222_REG_KEY_RESERVED;
                else if (dev_desc->legacy_gesture &&
                         iqs7222_sl_events[i].reg_key == IQS7222_REG_KEY_TAP)
                        reg_key = IQS7222_REG_KEY_TAP_LEGACY;
                else if (dev_desc->legacy_gesture &&
                         iqs7222_sl_events[i].reg_key == IQS7222_REG_KEY_AXIAL)
                        reg_key = IQS7222_REG_KEY_AXIAL_LEGACY;
                else
                        reg_key = iqs7222_sl_events[i].reg_key;

                /*
                 * The press/release event does not expose a direct GPIO link,
                 * but one can be emulated by tying each of the participating
                 * channels to the same GPIO.
                 */
                error = iqs7222_parse_event(iqs7222, event_node, sldr_index,
                                            IQS7222_REG_GRP_SLDR, reg_key,
                                            i ? iqs7222_sl_events[i].enable
                                              : sldr_setup[3 + reg_offset],
                                            i ? 1568 + sldr_index * 30
                                              : sldr_setup[4 + reg_offset],
                                            NULL,
                                            &iqs7222->sl_code[sldr_index][i]);
                if (error)
                        return error;

                if (!reg_offset)
                        sldr_setup[9] |= iqs7222_sl_events[i].enable;

                if (!dev_desc->event_offset)
                        continue;

                /*
                 * The press/release event is determined based on whether the
                 * coordinate field reports 0xFFFF and solely relies on touch
                 * or proximity interrupts to be unmasked.
                 */
                if (i && !reg_offset)
                        *event_mask |= (IQS7222_EVENT_MASK_SLDR << sldr_index);
                else if (sldr_setup[4 + reg_offset] == dev_desc->touch_link)
                        *event_mask |= IQS7222_EVENT_MASK_TOUCH;
                else
                        *event_mask |= IQS7222_EVENT_MASK_PROX;
        }

        /*
         * The following call handles a special pair of properties that shift
         * to make room for a wheel enable control in the case of IQS7222C.
         */
        return iqs7222_parse_props(iqs7222, sldr_node, sldr_index,
                                   IQS7222_REG_GRP_SLDR,
                                   dev_desc->wheel_enable ?
                                   IQS7222_REG_KEY_WHEEL :
                                   IQS7222_REG_KEY_NO_WHEEL);
}

static int iqs7222_parse_tpad(struct iqs7222_private *iqs7222,
                              struct fwnode_handle *tpad_node, int tpad_index)
{
        const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc;
        struct touchscreen_properties *prop = &iqs7222->prop;
        struct i2c_client *client = iqs7222->client;
        int num_chan = dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_row;
        int count, error, i;
        u16 *event_mask = &iqs7222->sys_setup[dev_desc->event_offset];
        u16 *tpad_setup = iqs7222->tpad_setup;
        unsigned int chan_sel[12];

        error = iqs7222_parse_props(iqs7222, tpad_node, tpad_index,
                                    IQS7222_REG_GRP_TPAD,
                                    IQS7222_REG_KEY_NONE);
        if (error)
                return error;

        count = fwnode_property_count_u32(tpad_node, "azoteq,channel-select");
        if (count < 0) {
                dev_err(&client->dev, "Failed to count %s channels: %d\n",
                        fwnode_get_name(tpad_node), count);
                return count;
        } else if (!count || count > ARRAY_SIZE(chan_sel)) {
                dev_err(&client->dev, "Invalid number of %s channels\n",
                        fwnode_get_name(tpad_node));
                return -EINVAL;
        }

        error = fwnode_property_read_u32_array(tpad_node,
                                               "azoteq,channel-select",
                                               chan_sel, count);
        if (error) {
                dev_err(&client->dev, "Failed to read %s channels: %d\n",
                        fwnode_get_name(tpad_node), error);
                return error;
        }

        tpad_setup[6] &= ~GENMASK(num_chan - 1, 0);

        for (i = 0; i < ARRAY_SIZE(chan_sel); i++) {
                tpad_setup[8 + i] = 0;
                if (i >= count || chan_sel[i] == U8_MAX)
                        continue;

                if (chan_sel[i] >= num_chan) {
                        dev_err(&client->dev, "Invalid %s channel: %u\n",
                                fwnode_get_name(tpad_node), chan_sel[i]);
                        return -EINVAL;
                }

                /*
                 * The following fields indicate which channels participate in
                 * the trackpad, as well as each channel's relative placement.
                 */
                tpad_setup[6] |= BIT(chan_sel[i]);
                tpad_setup[8 + i] = chan_sel[i] * 34 + 1072;
        }

        tpad_setup[7] = dev_desc->touch_link;
        if (fwnode_property_present(tpad_node, "azoteq,use-prox"))
                tpad_setup[7] -= 2;

        for (i = 0; i < ARRAY_SIZE(iqs7222_tp_events); i++)
                tpad_setup[20] &= ~(iqs7222_tp_events[i].strict |
                                    iqs7222_tp_events[i].enable);

        for (i = 0; i < ARRAY_SIZE(iqs7222_tp_events); i++) {
                const char *event_name = iqs7222_tp_events[i].name;

                struct fwnode_handle *event_node __free(fwnode_handle) =
                        fwnode_get_named_child_node(tpad_node, event_name);
                if (!event_node)
                        continue;

                if (fwnode_property_present(event_node,
                                            "azoteq,gesture-angle-tighten"))
                        tpad_setup[20] |= iqs7222_tp_events[i].strict;

                tpad_setup[20] |= iqs7222_tp_events[i].enable;

                error = iqs7222_parse_event(iqs7222, event_node, tpad_index,
                                            IQS7222_REG_GRP_TPAD,
                                            iqs7222_tp_events[i].reg_key,
                                            iqs7222_tp_events[i].link, 1566,
                                            NULL,
                                            &iqs7222->tp_code[i]);
                if (error)
                        return error;

                if (!dev_desc->event_offset)
                        continue;

                /*
                 * The press/release event is determined based on whether the
                 * coordinate fields report 0xFFFF and solely relies on touch
                 * or proximity interrupts to be unmasked.
                 */
                if (i)
                        *event_mask |= IQS7222_EVENT_MASK_TPAD;
                else if (tpad_setup[7] == dev_desc->touch_link)
                        *event_mask |= IQS7222_EVENT_MASK_TOUCH;
                else
                        *event_mask |= IQS7222_EVENT_MASK_PROX;
        }

        if (!iqs7222->tp_code[0])
                return 0;

        input_set_abs_params(iqs7222->keypad, ABS_X,
                             0, (tpad_setup[4] ? : 1) - 1, 0, 0);

        input_set_abs_params(iqs7222->keypad, ABS_Y,
                             0, (tpad_setup[5] ? : 1) - 1, 0, 0);

        touchscreen_parse_properties(iqs7222->keypad, false, prop);

        if (prop->max_x >= U16_MAX || prop->max_y >= U16_MAX) {
                dev_err(&client->dev, "Invalid trackpad size: %u*%u\n",
                        prop->max_x, prop->max_y);
                return -EINVAL;
        }

        tpad_setup[4] = prop->max_x + 1;
        tpad_setup[5] = prop->max_y + 1;

        return 0;
}

static int (*iqs7222_parse_extra[IQS7222_NUM_REG_GRPS])
                                (struct iqs7222_private *iqs7222,
                                 struct fwnode_handle *reg_grp_node,
                                 int reg_grp_index) = {
        [IQS7222_REG_GRP_CYCLE] = iqs7222_parse_cycle,
        [IQS7222_REG_GRP_CHAN] = iqs7222_parse_chan,
        [IQS7222_REG_GRP_SLDR] = iqs7222_parse_sldr,
        [IQS7222_REG_GRP_TPAD] = iqs7222_parse_tpad,
};

static int iqs7222_parse_reg_grp(struct iqs7222_private *iqs7222,
                                 enum iqs7222_reg_grp_id reg_grp,
                                 int reg_grp_index)
{
        struct i2c_client *client = iqs7222->client;
        int error;

        struct fwnode_handle *reg_grp_node __free(fwnode_handle) = NULL;
        if (iqs7222_reg_grp_names[reg_grp]) {
                char reg_grp_name[16];

                snprintf(reg_grp_name, sizeof(reg_grp_name),
                         iqs7222_reg_grp_names[reg_grp], reg_grp_index);

                reg_grp_node = device_get_named_child_node(&client->dev,
                                                           reg_grp_name);
        } else {
                reg_grp_node = fwnode_handle_get(dev_fwnode(&client->dev));
        }

        if (!reg_grp_node)
                return 0;

        error = iqs7222_parse_props(iqs7222, reg_grp_node, reg_grp_index,
                                    reg_grp, IQS7222_REG_KEY_NONE);
        if (error)
                return error;

        if (iqs7222_parse_extra[reg_grp]) {
                error = iqs7222_parse_extra[reg_grp](iqs7222, reg_grp_node,
                                                     reg_grp_index);
                if (error)
                        return error;
        }

        return 0;
}

static int iqs7222_parse_all(struct iqs7222_private *iqs7222)
{
        const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc;
        const struct iqs7222_reg_grp_desc *reg_grps = dev_desc->reg_grps;
        u16 *sys_setup = iqs7222->sys_setup;
        int error, i, j;

        if (dev_desc->allow_offset)
                sys_setup[dev_desc->allow_offset] = U16_MAX;

        if (dev_desc->event_offset)
                sys_setup[dev_desc->event_offset] = IQS7222_EVENT_MASK_ATI;

        for (i = 0; i < reg_grps[IQS7222_REG_GRP_GPIO].num_row; i++) {
                u16 *gpio_setup = iqs7222->gpio_setup[i];

                gpio_setup[0] &= ~IQS7222_GPIO_SETUP_0_GPIO_EN;
                gpio_setup[1] = 0;
                gpio_setup[2] = 0;

                if (reg_grps[IQS7222_REG_GRP_GPIO].num_row == 1)
                        continue;

                /*
                 * The IQS7222C and IQS7222D expose multiple GPIO and must be
                 * informed as to which GPIO this group represents.
                 */
                for (j = 0; j < ARRAY_SIZE(iqs7222_gpio_links); j++)
                        gpio_setup[0] &= ~BIT(iqs7222_gpio_links[j]);

                gpio_setup[0] |= BIT(iqs7222_gpio_links[i]);
        }

        for (i = 0; i < reg_grps[IQS7222_REG_GRP_CHAN].num_row; i++) {
                u16 *chan_setup = iqs7222->chan_setup[i];

                chan_setup[0] &= ~IQS7222_CHAN_SETUP_0_REF_MODE_MASK;
                chan_setup[0] &= ~IQS7222_CHAN_SETUP_0_CHAN_EN;

                chan_setup[5] = 0;
        }

        for (i = 0; i < reg_grps[IQS7222_REG_GRP_SLDR].num_row; i++) {
                u16 *sldr_setup = iqs7222->sldr_setup[i];

                sldr_setup[0] &= ~IQS7222_SLDR_SETUP_0_CHAN_CNT_MASK;
        }

        for (i = 0; i < IQS7222_NUM_REG_GRPS; i++) {
                for (j = 0; j < reg_grps[i].num_row; j++) {
                        error = iqs7222_parse_reg_grp(iqs7222, i, j);
                        if (error)
                                return error;
                }
        }

        return 0;
}

static int iqs7222_report(struct iqs7222_private *iqs7222)
{
        const struct iqs7222_dev_desc *dev_desc = iqs7222->dev_desc;
        struct i2c_client *client = iqs7222->client;
        int num_chan = dev_desc->reg_grps[IQS7222_REG_GRP_CHAN].num_row;
        int num_stat = dev_desc->reg_grps[IQS7222_REG_GRP_STAT].num_col;
        int error, i, j;
        __le16 status[IQS7222_MAX_COLS_STAT];

        error = iqs7222_read_burst(iqs7222, IQS7222_SYS_STATUS, status,
                                   num_stat * sizeof(*status));
        if (error)
                return error;

        if (le16_to_cpu(status[0]) & IQS7222_SYS_STATUS_RESET) {
                dev_err(&client->dev, "Unexpected device reset\n");
                return iqs7222_dev_init(iqs7222, WRITE);
        }

        if (le16_to_cpu(status[0]) & IQS7222_SYS_STATUS_ATI_ERROR) {
                dev_err(&client->dev, "Unexpected ATI error\n");
                return iqs7222_ati_trigger(iqs7222);
        }

        if (le16_to_cpu(status[0]) & IQS7222_SYS_STATUS_ATI_ACTIVE)
                return 0;

        for (i = 0; i < num_chan; i++) {
                u16 *chan_setup = iqs7222->chan_setup[i];

                if (!(chan_setup[0] & IQS7222_CHAN_SETUP_0_CHAN_EN))
                        continue;

                for (j = 0; j < ARRAY_SIZE(iqs7222_kp_events); j++) {
                        /*
                         * Proximity state begins at offset 2 and spills into
                         * offset 3 for devices with more than 16 channels.
                         *
                         * Touch state begins at the first offset immediately
                         * following proximity state.
                         */
                        int k = 2 + j * (num_chan > 16 ? 2 : 1);
                        u16 state = le16_to_cpu(status[k + i / 16]);

                        if (!iqs7222->kp_type[i][j])
                                continue;

                        input_event(iqs7222->keypad,
                                    iqs7222->kp_type[i][j],
                                    iqs7222->kp_code[i][j],
                                    !!(state & BIT(i % 16)));
                }
        }

        for (i = 0; i < dev_desc->reg_grps[IQS7222_REG_GRP_SLDR].num_row; i++) {
                u16 *sldr_setup = iqs7222->sldr_setup[i];
                u16 sldr_pos = le16_to_cpu(status[4 + i]);
                u16 state = le16_to_cpu(status[6 + i]);

                if (!(sldr_setup[0] & IQS7222_SLDR_SETUP_0_CHAN_CNT_MASK))
                        continue;

                if (sldr_pos < dev_desc->sldr_res)
                        input_report_abs(iqs7222->keypad, iqs7222->sl_axis[i],
                                         sldr_pos);

                input_report_key(iqs7222->keypad, iqs7222->sl_code[i][0],
                                 sldr_pos < dev_desc->sldr_res);

                /*
                 * A maximum resolution indicates the device does not support
                 * gestures, in which case the remaining fields are ignored.
                 */
                if (dev_desc->sldr_res == U16_MAX)
                        continue;

                if (!(le16_to_cpu(status[1]) & IQS7222_EVENT_MASK_SLDR << i))
                        continue;

                /*
                 * Skip the press/release event, as it does not have separate
                 * status fields and is handled separately.
                 */
                for (j = 1; j < ARRAY_SIZE(iqs7222_sl_events); j++) {
                        u16 mask = iqs7222_sl_events[j].mask;
                        u16 val = iqs7222_sl_events[j].val;

                        input_report_key(iqs7222->keypad,
                                         iqs7222->sl_code[i][j],
                                         (state & mask) == val);
                }

                input_sync(iqs7222->keypad);

                for (j = 1; j < ARRAY_SIZE(iqs7222_sl_events); j++)
                        input_report_key(iqs7222->keypad,
                                         iqs7222->sl_code[i][j], 0);
        }

        for (i = 0; i < dev_desc->reg_grps[IQS7222_REG_GRP_TPAD].num_row; i++) {
                u16 tpad_pos_x = le16_to_cpu(status[4]);
                u16 tpad_pos_y = le16_to_cpu(status[5]);
                u16 state = le16_to_cpu(status[6]);

                input_report_key(iqs7222->keypad, iqs7222->tp_code[0],
                                 tpad_pos_x < U16_MAX);

                if (tpad_pos_x < U16_MAX)
                        touchscreen_report_pos(iqs7222->keypad, &iqs7222->prop,
                                               tpad_pos_x, tpad_pos_y, false);

                if (!(le16_to_cpu(status[1]) & IQS7222_EVENT_MASK_TPAD))
                        continue;

                /*
                 * Skip the press/release event, as it does not have separate
                 * status fields and is handled separately.
                 */
                for (j = 1; j < ARRAY_SIZE(iqs7222_tp_events); j++) {
                        u16 mask = iqs7222_tp_events[j].mask;
                        u16 val = iqs7222_tp_events[j].val;

                        input_report_key(iqs7222->keypad,
                                         iqs7222->tp_code[j],
                                         (state & mask) == val);
                }

                input_sync(iqs7222->keypad);

                for (j = 1; j < ARRAY_SIZE(iqs7222_tp_events); j++)
                        input_report_key(iqs7222->keypad,
                                         iqs7222->tp_code[j], 0);
        }

        input_sync(iqs7222->keypad);

        return 0;
}

static irqreturn_t iqs7222_irq(int irq, void *context)
{
        struct iqs7222_private *iqs7222 = context;

        return iqs7222_report(iqs7222) ? IRQ_NONE : IRQ_HANDLED;
}

static int iqs7222_probe(struct i2c_client *client)
{
        struct iqs7222_private *iqs7222;
        unsigned long irq_flags;
        int error, irq;

        iqs7222 = devm_kzalloc(&client->dev, sizeof(*iqs7222), GFP_KERNEL);
        if (!iqs7222)
                return -ENOMEM;

        i2c_set_clientdata(client, iqs7222);
        iqs7222->client = client;

        iqs7222->keypad = devm_input_allocate_device(&client->dev);
        if (!iqs7222->keypad)
                return -ENOMEM;

        iqs7222->keypad->name = client->name;
        iqs7222->keypad->id.bustype = BUS_I2C;

        /*
         * The RDY pin behaves as an interrupt, but must also be polled ahead
         * of unsolicited I2C communication. As such, it is first opened as a
         * GPIO and then passed to gpiod_to_irq() to register the interrupt.
         */
        iqs7222->irq_gpio = devm_gpiod_get(&client->dev, "irq", GPIOD_IN);
        if (IS_ERR(iqs7222->irq_gpio)) {
                error = PTR_ERR(iqs7222->irq_gpio);
                dev_err(&client->dev, "Failed to request IRQ GPIO: %d\n",
                        error);
                return error;
        }

        iqs7222->reset_gpio = devm_gpiod_get_optional(&client->dev, "reset",
                                                      GPIOD_OUT_HIGH);
        if (IS_ERR(iqs7222->reset_gpio)) {
                error = PTR_ERR(iqs7222->reset_gpio);
                dev_err(&client->dev, "Failed to request reset GPIO: %d\n",
                        error);
                return error;
        }

        error = iqs7222_hard_reset(iqs7222);
        if (error)
                return error;

        error = iqs7222_dev_info(iqs7222);
        if (error)
                return error;

        error = iqs7222_dev_init(iqs7222, READ);
        if (error)
                return error;

        error = iqs7222_parse_all(iqs7222);
        if (error)
                return error;

        error = iqs7222_dev_init(iqs7222, WRITE);
        if (error)
                return error;

        error = iqs7222_report(iqs7222);
        if (error)
                return error;

        error = input_register_device(iqs7222->keypad);
        if (error) {
                dev_err(&client->dev, "Failed to register device: %d\n", error);
                return error;
        }

        irq = gpiod_to_irq(iqs7222->irq_gpio);
        if (irq < 0)
                return irq;

        irq_flags = gpiod_is_active_low(iqs7222->irq_gpio) ? IRQF_TRIGGER_LOW
                                                           : IRQF_TRIGGER_HIGH;
        irq_flags |= IRQF_ONESHOT;

        error = devm_request_threaded_irq(&client->dev, irq, NULL, iqs7222_irq,
                                          irq_flags, client->name, iqs7222);
        if (error)
                dev_err(&client->dev, "Failed to request IRQ: %d\n", error);

        return error;
}

static const struct of_device_id iqs7222_of_match[] = {
        { .compatible = "azoteq,iqs7222a" },
        { .compatible = "azoteq,iqs7222b" },
        { .compatible = "azoteq,iqs7222c" },
        { .compatible = "azoteq,iqs7222d" },
        { }
};
MODULE_DEVICE_TABLE(of, iqs7222_of_match);

static struct i2c_driver iqs7222_i2c_driver = {
        .driver = {
                .name = "iqs7222",
                .of_match_table = iqs7222_of_match,
        },
        .probe = iqs7222_probe,
};
module_i2c_driver(iqs7222_i2c_driver);

MODULE_AUTHOR("Jeff LaBundy <jeff@labundy.com>");
MODULE_DESCRIPTION("Azoteq IQS7222A/B/C/D Capacitive Touch Controller");
MODULE_LICENSE("GPL");