// SPDX-License-Identifier: GPL-2.0
/*
 * Texas Instruments System Control Interface Protocol
 *
 * Copyright (C) 2015-2016 Texas Instruments Incorporated - https://www.ti.com/
 *      Nishanth Menon
 */

#ifndef __TISCI_PROTOCOL_H
#define __TISCI_PROTOCOL_H

/**
 * struct ti_sci_version_info - version information structure
 * @abi_major:  Major ABI version. Change here implies risk of backward
 *              compatibility break.
 * @abi_minor:  Minor ABI version. Change here implies new feature addition,
 *              or compatible change in ABI.
 * @firmware_revision:  Firmware revision (not usually used).
 * @firmware_description: Firmware description (not usually used).
 */
struct ti_sci_version_info {
        u8 abi_major;
        u8 abi_minor;
        u16 firmware_revision;
        char firmware_description[32];
};

struct ti_sci_handle;

/**
 * struct ti_sci_core_ops - SoC Core Operations
 * @reboot_device: Reboot the SoC
 *              Returns 0 for successful request(ideally should never return),
 *              else returns corresponding error value.
 */
struct ti_sci_core_ops {
        int (*reboot_device)(const struct ti_sci_handle *handle);
};

/**
 * struct ti_sci_dev_ops - Device control operations
 * @get_device: Command to request for device managed by TISCI
 *              Returns 0 for successful exclusive request, else returns
 *              corresponding error message.
 * @idle_device: Command to idle a device managed by TISCI
 *              Returns 0 for successful exclusive request, else returns
 *              corresponding error message.
 * @put_device: Command to release a device managed by TISCI
 *              Returns 0 for successful release, else returns corresponding
 *              error message.
 * @is_valid:   Check if the device ID is a valid ID.
 *              Returns 0 if the ID is valid, else returns corresponding error.
 * @get_context_loss_count: Command to retrieve context loss counter - this
 *              increments every time the device looses context. Overflow
 *              is possible.
 *              - count: pointer to u32 which will retrieve counter
 *              Returns 0 for successful information request and count has
 *              proper data, else returns corresponding error message.
 * @is_idle:    Reports back about device idle state
 *              - req_state: Returns requested idle state
 *              Returns 0 for successful information request and req_state and
 *              current_state has proper data, else returns corresponding error
 *              message.
 * @is_stop:    Reports back about device stop state
 *              - req_state: Returns requested stop state
 *              - current_state: Returns current stop state
 *              Returns 0 for successful information request and req_state and
 *              current_state has proper data, else returns corresponding error
 *              message.
 * @is_on:      Reports back about device ON(or active) state
 *              - req_state: Returns requested ON state
 *              - current_state: Returns current ON state
 *              Returns 0 for successful information request and req_state and
 *              current_state has proper data, else returns corresponding error
 *              message.
 * @is_transitioning: Reports back if the device is in the middle of transition
 *              of state.
 *              -current_state: Returns 'true' if currently transitioning.
 * @set_device_resets: Command to configure resets for device managed by TISCI.
 *              -reset_state: Device specific reset bit field
 *              Returns 0 for successful request, else returns
 *              corresponding error message.
 * @get_device_resets: Command to read state of resets for device managed
 *              by TISCI.
 *              -reset_state: pointer to u32 which will retrieve resets
 *              Returns 0 for successful request, else returns
 *              corresponding error message.
 *
 * NOTE: for all these functions, the following parameters are generic in
 * nature:
 * -handle:     Pointer to TISCI handle as retrieved by *ti_sci_get_handle
 * -id:         Device Identifier
 *
 * Request for the device - NOTE: the client MUST maintain integrity of
 * usage count by balancing get_device with put_device. No refcounting is
 * managed by driver for that purpose.
 */
struct ti_sci_dev_ops {
        int (*get_device)(const struct ti_sci_handle *handle, u32 id);
        int (*get_device_exclusive)(const struct ti_sci_handle *handle, u32 id);
        int (*idle_device)(const struct ti_sci_handle *handle, u32 id);
        int (*idle_device_exclusive)(const struct ti_sci_handle *handle,
                                     u32 id);
        int (*put_device)(const struct ti_sci_handle *handle, u32 id);
        int (*is_valid)(const struct ti_sci_handle *handle, u32 id);
        int (*get_context_loss_count)(const struct ti_sci_handle *handle,
                                      u32 id, u32 *count);
        int (*is_idle)(const struct ti_sci_handle *handle, u32 id,
                       bool *requested_state);
        int (*is_stop)(const struct ti_sci_handle *handle, u32 id,
                       bool *req_state, bool *current_state);
        int (*is_on)(const struct ti_sci_handle *handle, u32 id,
                     bool *req_state, bool *current_state);
        int (*is_transitioning)(const struct ti_sci_handle *handle, u32 id,
                                bool *current_state);
        int (*set_device_resets)(const struct ti_sci_handle *handle, u32 id,
                                 u32 reset_state);
        int (*get_device_resets)(const struct ti_sci_handle *handle, u32 id,
                                 u32 *reset_state);
};

/**
 * struct ti_sci_clk_ops - Clock control operations
 * @get_clock:  Request for activation of clock and manage by processor
 *              - needs_ssc: 'true' if Spread Spectrum clock is desired.
 *              - can_change_freq: 'true' if frequency change is desired.
 *              - enable_input_term: 'true' if input termination is desired.
 * @idle_clock: Request for Idling a clock managed by processor
 * @put_clock:  Release the clock to be auto managed by TISCI
 * @is_auto:    Is the clock being auto managed
 *              - req_state: state indicating if the clock is auto managed
 * @is_on:      Is the clock ON
 *              - req_state: if the clock is requested to be forced ON
 *              - current_state: if the clock is currently ON
 * @is_off:     Is the clock OFF
 *              - req_state: if the clock is requested to be forced OFF
 *              - current_state: if the clock is currently Gated
 * @set_parent: Set the clock source of a specific device clock
 *              - parent_id: Parent clock identifier to set.
 * @get_parent: Get the current clock source of a specific device clock
 *              - parent_id: Parent clock identifier which is the parent.
 * @get_num_parents: Get the number of parents of the current clock source
 *              - num_parents: returns the number of parent clocks.
 * @get_best_match_freq: Find a best matching frequency for a frequency
 *              range.
 *              - match_freq: Best matching frequency in Hz.
 * @set_freq:   Set the Clock frequency
 * @get_freq:   Get the Clock frequency
 *              - current_freq: Frequency in Hz that the clock is at.
 *
 * NOTE: for all these functions, the following parameters are generic in
 * nature:
 * -handle:     Pointer to TISCI handle as retrieved by *ti_sci_get_handle
 * -did:        Device identifier this request is for
 * -cid:        Clock identifier for the device for this request.
 *              Each device has it's own set of clock inputs. This indexes
 *              which clock input to modify.
 * -min_freq:   The minimum allowable frequency in Hz. This is the minimum
 *              allowable programmed frequency and does not account for clock
 *              tolerances and jitter.
 * -target_freq: The target clock frequency in Hz. A frequency will be
 *              processed as close to this target frequency as possible.
 * -max_freq:   The maximum allowable frequency in Hz. This is the maximum
 *              allowable programmed frequency and does not account for clock
 *              tolerances and jitter.
 *
 * Request for the clock - NOTE: the client MUST maintain integrity of
 * usage count by balancing get_clock with put_clock. No refcounting is
 * managed by driver for that purpose.
 */
struct ti_sci_clk_ops {
        int (*get_clock)(const struct ti_sci_handle *handle, u32 did, u32 cid,
                         bool needs_ssc, bool can_change_freq,
                         bool enable_input_term);
        int (*idle_clock)(const struct ti_sci_handle *handle, u32 did, u32 cid);
        int (*put_clock)(const struct ti_sci_handle *handle, u32 did, u32 cid);
        int (*is_auto)(const struct ti_sci_handle *handle, u32 did, u32 cid,
                       bool *req_state);
        int (*is_on)(const struct ti_sci_handle *handle, u32 did, u32 cid,
                     bool *req_state, bool *current_state);
        int (*is_off)(const struct ti_sci_handle *handle, u32 did, u32 cid,
                      bool *req_state, bool *current_state);
        int (*set_parent)(const struct ti_sci_handle *handle, u32 did, u32 cid,
                          u32 parent_id);
        int (*get_parent)(const struct ti_sci_handle *handle, u32 did, u32 cid,
                          u32 *parent_id);
        int (*get_num_parents)(const struct ti_sci_handle *handle, u32 did,
                               u32 cid, u32 *num_parents);
        int (*get_best_match_freq)(const struct ti_sci_handle *handle, u32 did,
                                   u32 cid, u64 min_freq, u64 target_freq,
                                   u64 max_freq, u64 *match_freq);
        int (*set_freq)(const struct ti_sci_handle *handle, u32 did, u32 cid,
                        u64 min_freq, u64 target_freq, u64 max_freq);
        int (*get_freq)(const struct ti_sci_handle *handle, u32 did, u32 cid,
                        u64 *current_freq);
};

/* TISCI LPM IO isolation control values */
#define TISCI_MSG_VALUE_IO_ENABLE                       1
#define TISCI_MSG_VALUE_IO_DISABLE                      0

/* TISCI LPM constraint state values */
#define TISCI_MSG_CONSTRAINT_SET                        1
#define TISCI_MSG_CONSTRAINT_CLR                        0

/**
 * struct ti_sci_pm_ops - Low Power Mode (LPM) control operations
 * @lpm_wake_reason: Get the wake up source that woke the SoC from LPM
 *              - source: The wake up source that woke soc from LPM.
 *              - timestamp: Timestamp at which soc woke.
 * @set_device_constraint: Set LPM constraint on behalf of a device
 *              - id: Device Identifier
 *              - state: The desired state of device constraint: set or clear.
 * @set_latency_constraint: Set LPM resume latency constraint
 *              - latency: maximum acceptable latency to wake up from low power mode
 *              - state: The desired state of latency constraint: set or clear.
 */
struct ti_sci_pm_ops {
        int (*lpm_wake_reason)(const struct ti_sci_handle *handle,
                               u32 *source, u64 *timestamp, u8 *pin, u8 *mode);
        int (*set_device_constraint)(const struct ti_sci_handle *handle,
                                     u32 id, u8 state);
        int (*set_latency_constraint)(const struct ti_sci_handle *handle,
                                      u16 latency, u8 state);
};

/**
 * struct ti_sci_resource_desc - Description of TI SCI resource instance range.
 * @start:      Start index of the first resource range.
 * @num:        Number of resources in the first range.
 * @start_sec:  Start index of the second resource range.
 * @num_sec:    Number of resources in the second range.
 * @res_map:    Bitmap to manage the allocation of these resources.
 */
struct ti_sci_resource_desc {
        u16 start;
        u16 num;
        u16 start_sec;
        u16 num_sec;
        unsigned long *res_map;
};

/**
 * struct ti_sci_rm_core_ops - Resource management core operations
 * @get_range:          Get a range of resources belonging to ti sci host.
 * @get_rage_from_shost:        Get a range of resources belonging to
 *                              specified host id.
 *                      - s_host: Host processing entity to which the
 *                                resources are allocated
 *
 * NOTE: for these functions, all the parameters are consolidated and defined
 * as below:
 * - handle:    Pointer to TISCI handle as retrieved by *ti_sci_get_handle
 * - dev_id:    TISCI device ID.
 * - subtype:   Resource assignment subtype that is being requested
 *              from the given device.
 * - desc:      Pointer to ti_sci_resource_desc to be updated with the resource
 *              range start index and number of resources
 */
struct ti_sci_rm_core_ops {
        int (*get_range)(const struct ti_sci_handle *handle, u32 dev_id,
                         u8 subtype, struct ti_sci_resource_desc *desc);
        int (*get_range_from_shost)(const struct ti_sci_handle *handle,
                                    u32 dev_id, u8 subtype, u8 s_host,
                                    struct ti_sci_resource_desc *desc);
};

#define TI_SCI_RESASG_SUBTYPE_IR_OUTPUT         0
#define TI_SCI_RESASG_SUBTYPE_IA_VINT           0xa
#define TI_SCI_RESASG_SUBTYPE_GLOBAL_EVENT_SEVT 0xd
/**
 * struct ti_sci_rm_irq_ops: IRQ management operations
 * @set_irq:            Set an IRQ route between the requested source
 *                      and destination
 * @set_event_map:      Set an Event based peripheral irq to Interrupt
 *                      Aggregator.
 * @free_irq:           Free an IRQ route between the requested source
 *                      and destination.
 * @free_event_map:     Free an event based peripheral irq to Interrupt
 *                      Aggregator.
 */
struct ti_sci_rm_irq_ops {
        int (*set_irq)(const struct ti_sci_handle *handle, u16 src_id,
                       u16 src_index, u16 dst_id, u16 dst_host_irq);
        int (*set_event_map)(const struct ti_sci_handle *handle, u16 src_id,
                             u16 src_index, u16 ia_id, u16 vint,
                             u16 global_event, u8 vint_status_bit);
        int (*free_irq)(const struct ti_sci_handle *handle, u16 src_id,
                        u16 src_index, u16 dst_id, u16 dst_host_irq);
        int (*free_event_map)(const struct ti_sci_handle *handle, u16 src_id,
                              u16 src_index, u16 ia_id, u16 vint,
                              u16 global_event, u8 vint_status_bit);
};

/* RA config.addr_lo parameter is valid for RM ring configure TI_SCI message */
#define TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID  BIT(0)
/* RA config.addr_hi parameter is valid for RM ring configure TI_SCI message */
#define TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID  BIT(1)
 /* RA config.count parameter is valid for RM ring configure TI_SCI message */
#define TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID    BIT(2)
/* RA config.mode parameter is valid for RM ring configure TI_SCI message */
#define TI_SCI_MSG_VALUE_RM_RING_MODE_VALID     BIT(3)
/* RA config.size parameter is valid for RM ring configure TI_SCI message */
#define TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID     BIT(4)
/* RA config.order_id parameter is valid for RM ring configure TISCI message */
#define TI_SCI_MSG_VALUE_RM_RING_ORDER_ID_VALID BIT(5)
/* RA config.virtid parameter is valid for RM ring configure TISCI message */
#define TI_SCI_MSG_VALUE_RM_RING_VIRTID_VALID   BIT(6)
/* RA config.asel parameter is valid for RM ring configure TISCI message */
#define TI_SCI_MSG_VALUE_RM_RING_ASEL_VALID     BIT(7)

#define TI_SCI_MSG_VALUE_RM_ALL_NO_ORDER \
        (TI_SCI_MSG_VALUE_RM_RING_ADDR_LO_VALID | \
        TI_SCI_MSG_VALUE_RM_RING_ADDR_HI_VALID | \
        TI_SCI_MSG_VALUE_RM_RING_COUNT_VALID | \
        TI_SCI_MSG_VALUE_RM_RING_MODE_VALID | \
        TI_SCI_MSG_VALUE_RM_RING_SIZE_VALID | \
        TI_SCI_MSG_VALUE_RM_RING_ASEL_VALID)

/**
 * struct ti_sci_msg_rm_ring_cfg - Ring configuration
 *
 * Parameters for Navigator Subsystem ring configuration
 * See @ti_sci_msg_rm_ring_cfg_req
 */
struct ti_sci_msg_rm_ring_cfg {
        u32 valid_params;
        u16 nav_id;
        u16 index;
        u32 addr_lo;
        u32 addr_hi;
        u32 count;
        u8 mode;
        u8 size;
        u8 order_id;
        u16 virtid;
        u8 asel;
};

/**
 * struct ti_sci_rm_ringacc_ops - Ring Accelerator Management operations
 * @set_cfg: configure the SoC Navigator Subsystem Ring Accelerator ring
 */
struct ti_sci_rm_ringacc_ops {
        int (*set_cfg)(const struct ti_sci_handle *handle,
                       const struct ti_sci_msg_rm_ring_cfg *params);
};

/**
 * struct ti_sci_rm_psil_ops - PSI-L thread operations
 * @pair: pair PSI-L source thread to a destination thread.
 *      If the src_thread is mapped to UDMA tchan, the corresponding channel's
 *      TCHAN_THRD_ID register is updated.
 *      If the dst_thread is mapped to UDMA rchan, the corresponding channel's
 *      RCHAN_THRD_ID register is updated.
 * @unpair: unpair PSI-L source thread from a destination thread.
 *      If the src_thread is mapped to UDMA tchan, the corresponding channel's
 *      TCHAN_THRD_ID register is cleared.
 *      If the dst_thread is mapped to UDMA rchan, the corresponding channel's
 *      RCHAN_THRD_ID register is cleared.
 */
struct ti_sci_rm_psil_ops {
        int (*pair)(const struct ti_sci_handle *handle, u32 nav_id,
                    u32 src_thread, u32 dst_thread);
        int (*unpair)(const struct ti_sci_handle *handle, u32 nav_id,
                      u32 src_thread, u32 dst_thread);
};

/* UDMAP channel types */
#define TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR              2
#define TI_SCI_RM_UDMAP_CHAN_TYPE_PKT_PBRR_SB           3       /* RX only */
#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_PBRR             10
#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_PBVR             11
#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBRR       12
#define TI_SCI_RM_UDMAP_CHAN_TYPE_3RDP_BCOPY_PBVR       13

#define TI_SCI_RM_UDMAP_RX_FLOW_DESC_HOST               0
#define TI_SCI_RM_UDMAP_RX_FLOW_DESC_MONO               2

#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_64_BYTES        1
#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_128_BYTES       2
#define TI_SCI_RM_UDMAP_CHAN_BURST_SIZE_256_BYTES       3

#define TI_SCI_RM_BCDMA_EXTENDED_CH_TYPE_TCHAN          0
#define TI_SCI_RM_BCDMA_EXTENDED_CH_TYPE_BCHAN          1

/* UDMAP TX/RX channel valid_params common declarations */
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PAUSE_ON_ERR_VALID         BIT(0)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ATYPE_VALID                BIT(1)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_CHAN_TYPE_VALID            BIT(2)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_FETCH_SIZE_VALID           BIT(3)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_CQ_QNUM_VALID              BIT(4)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_PRIORITY_VALID             BIT(5)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_QOS_VALID                  BIT(6)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_ORDER_ID_VALID             BIT(7)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_SCHED_PRIORITY_VALID       BIT(8)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_BURST_SIZE_VALID           BIT(14)

/**
 * Configures a Navigator Subsystem UDMAP transmit channel
 *
 * Configures a Navigator Subsystem UDMAP transmit channel registers.
 * See @ti_sci_msg_rm_udmap_tx_ch_cfg_req
 */
struct ti_sci_msg_rm_udmap_tx_ch_cfg {
        u32 valid_params;
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FILT_EINFO_VALID        BIT(9)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FILT_PSWORDS_VALID      BIT(10)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_SUPR_TDPKT_VALID        BIT(11)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_CREDIT_COUNT_VALID      BIT(12)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_FDEPTH_VALID            BIT(13)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_TX_TDTYPE_VALID            BIT(15)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_EXTENDED_CH_TYPE_VALID     BIT(16)
        u16 nav_id;
        u16 index;
        u8 tx_pause_on_err;
        u8 tx_filt_einfo;
        u8 tx_filt_pswords;
        u8 tx_atype;
        u8 tx_chan_type;
        u8 tx_supr_tdpkt;
        u16 tx_fetch_size;
        u8 tx_credit_count;
        u16 txcq_qnum;
        u8 tx_priority;
        u8 tx_qos;
        u8 tx_orderid;
        u16 fdepth;
        u8 tx_sched_priority;
        u8 tx_burst_size;
        u8 tx_tdtype;
        u8 extended_ch_type;
};

/**
 * Configures a Navigator Subsystem UDMAP receive channel
 *
 * Configures a Navigator Subsystem UDMAP receive channel registers.
 * See @ti_sci_msg_rm_udmap_rx_ch_cfg_req
 */
struct ti_sci_msg_rm_udmap_rx_ch_cfg {
        u32 valid_params;
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_START_VALID      BIT(9)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_FLOWID_CNT_VALID        BIT(10)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_SHORT_VALID      BIT(11)
#define TI_SCI_MSG_VALUE_RM_UDMAP_CH_RX_IGNORE_LONG_VALID       BIT(12)
        u16 nav_id;
        u16 index;
        u16 rx_fetch_size;
        u16 rxcq_qnum;
        u8 rx_priority;
        u8 rx_qos;
        u8 rx_orderid;
        u8 rx_sched_priority;
        u16 flowid_start;
        u16 flowid_cnt;
        u8 rx_pause_on_err;
        u8 rx_atype;
        u8 rx_chan_type;
        u8 rx_ignore_short;
        u8 rx_ignore_long;
        u8 rx_burst_size;
};

/**
 * Configures a Navigator Subsystem UDMAP receive flow
 *
 * Configures a Navigator Subsystem UDMAP receive flow's registers.
 * See @tis_ci_msg_rm_udmap_flow_cfg_req
 */
struct ti_sci_msg_rm_udmap_flow_cfg {
        u32 valid_params;
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_EINFO_PRESENT_VALID      BIT(0)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_PSINFO_PRESENT_VALID     BIT(1)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_ERROR_HANDLING_VALID     BIT(2)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DESC_TYPE_VALID          BIT(3)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SOP_OFFSET_VALID         BIT(4)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_QNUM_VALID          BIT(5)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_HI_VALID         BIT(6)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_LO_VALID         BIT(7)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_HI_VALID        BIT(8)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_LO_VALID        BIT(9)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_HI_SEL_VALID     BIT(10)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_SRC_TAG_LO_SEL_VALID     BIT(11)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_HI_SEL_VALID    BIT(12)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_DEST_TAG_LO_SEL_VALID    BIT(13)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ0_SZ0_QNUM_VALID      BIT(14)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ1_QNUM_VALID          BIT(15)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ2_QNUM_VALID          BIT(16)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_FDQ3_QNUM_VALID          BIT(17)
#define TI_SCI_MSG_VALUE_RM_UDMAP_FLOW_PS_LOCATION_VALID        BIT(18)
        u16 nav_id;
        u16 flow_index;
        u8 rx_einfo_present;
        u8 rx_psinfo_present;
        u8 rx_error_handling;
        u8 rx_desc_type;
        u16 rx_sop_offset;
        u16 rx_dest_qnum;
        u8 rx_src_tag_hi;
        u8 rx_src_tag_lo;
        u8 rx_dest_tag_hi;
        u8 rx_dest_tag_lo;
        u8 rx_src_tag_hi_sel;
        u8 rx_src_tag_lo_sel;
        u8 rx_dest_tag_hi_sel;
        u8 rx_dest_tag_lo_sel;
        u16 rx_fdq0_sz0_qnum;
        u16 rx_fdq1_qnum;
        u16 rx_fdq2_qnum;
        u16 rx_fdq3_qnum;
        u8 rx_ps_location;
};

/**
 * struct ti_sci_rm_udmap_ops - UDMA Management operations
 * @tx_ch_cfg: configure SoC Navigator Subsystem UDMA transmit channel.
 * @rx_ch_cfg: configure SoC Navigator Subsystem UDMA receive channel.
 * @rx_flow_cfg1: configure SoC Navigator Subsystem UDMA receive flow.
 */
struct ti_sci_rm_udmap_ops {
        int (*tx_ch_cfg)(const struct ti_sci_handle *handle,
                         const struct ti_sci_msg_rm_udmap_tx_ch_cfg *params);
        int (*rx_ch_cfg)(const struct ti_sci_handle *handle,
                         const struct ti_sci_msg_rm_udmap_rx_ch_cfg *params);
        int (*rx_flow_cfg)(const struct ti_sci_handle *handle,
                           const struct ti_sci_msg_rm_udmap_flow_cfg *params);
};

/**
 * struct ti_sci_proc_ops - Processor Control operations
 * @request:    Request to control a physical processor. The requesting host
 *              should be in the processor access list
 * @release:    Relinquish a physical processor control
 * @handover:   Handover a physical processor control to another host
 *              in the permitted list
 * @set_config: Set base configuration of a processor
 * @set_control: Setup limited control flags in specific cases
 * @get_status: Get the state of physical processor
 *
 * NOTE: The following paramteres are generic in nature for all these ops,
 * -handle:     Pointer to TI SCI handle as retrieved by *ti_sci_get_handle
 * -pid:        Processor ID
 * -hid:        Host ID
 */
struct ti_sci_proc_ops {
        int (*request)(const struct ti_sci_handle *handle, u8 pid);
        int (*release)(const struct ti_sci_handle *handle, u8 pid);
        int (*handover)(const struct ti_sci_handle *handle, u8 pid, u8 hid);
        int (*set_config)(const struct ti_sci_handle *handle, u8 pid,
                          u64 boot_vector, u32 cfg_set, u32 cfg_clr);
        int (*set_control)(const struct ti_sci_handle *handle, u8 pid,
                           u32 ctrl_set, u32 ctrl_clr);
        int (*get_status)(const struct ti_sci_handle *handle, u8 pid,
                          u64 *boot_vector, u32 *cfg_flags, u32 *ctrl_flags,
                          u32 *status_flags);
};

/**
 * struct ti_sci_ops - Function support for TI SCI
 * @dev_ops:    Device specific operations
 * @clk_ops:    Clock specific operations
 * @rm_core_ops:        Resource management core operations.
 * @rm_irq_ops:         IRQ management specific operations
 * @proc_ops:   Processor Control specific operations
 */
struct ti_sci_ops {
        struct ti_sci_core_ops core_ops;
        struct ti_sci_dev_ops dev_ops;
        struct ti_sci_clk_ops clk_ops;
        struct ti_sci_pm_ops pm_ops;
        struct ti_sci_rm_core_ops rm_core_ops;
        struct ti_sci_rm_irq_ops rm_irq_ops;
        struct ti_sci_rm_ringacc_ops rm_ring_ops;
        struct ti_sci_rm_psil_ops rm_psil_ops;
        struct ti_sci_rm_udmap_ops rm_udmap_ops;
        struct ti_sci_proc_ops proc_ops;
};

/**
 * struct ti_sci_handle - Handle returned to TI SCI clients for usage.
 * @version:    structure containing version information
 * @ops:        operations that are made available to TI SCI clients
 */
struct ti_sci_handle {
        struct ti_sci_version_info version;
        struct ti_sci_ops ops;
};

#define TI_SCI_RESOURCE_NULL    0xffff

/**
 * struct ti_sci_resource - Structure representing a resource assigned
 *                          to a device.
 * @sets:       Number of sets available from this resource type
 * @lock:       Lock to guard the res map in each set.
 * @desc:       Array of resource descriptors.
 */
struct ti_sci_resource {
        u16 sets;
        raw_spinlock_t lock;
        struct ti_sci_resource_desc *desc;
};

#if IS_ENABLED(CONFIG_TI_SCI_PROTOCOL)
const struct ti_sci_handle *ti_sci_get_handle(struct device *dev);
int ti_sci_put_handle(const struct ti_sci_handle *handle);
const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev);
const struct ti_sci_handle *ti_sci_get_by_phandle(struct device_node *np,
                                                  const char *property);
const struct ti_sci_handle *devm_ti_sci_get_by_phandle(struct device *dev,
                                                       const char *property);
u16 ti_sci_get_free_resource(struct ti_sci_resource *res);
void ti_sci_release_resource(struct ti_sci_resource *res, u16 id);
u32 ti_sci_get_num_resources(struct ti_sci_resource *res);
struct ti_sci_resource *
devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
                            struct device *dev, u32 dev_id, char *of_prop);
struct ti_sci_resource *
devm_ti_sci_get_resource(const struct ti_sci_handle *handle, struct device *dev,
                         u32 dev_id, u32 sub_type);

#else   /* CONFIG_TI_SCI_PROTOCOL */

static inline const struct ti_sci_handle *ti_sci_get_handle(struct device *dev)
{
        return ERR_PTR(-EINVAL);
}

static inline int ti_sci_put_handle(const struct ti_sci_handle *handle)
{
        return -EINVAL;
}

static inline
const struct ti_sci_handle *devm_ti_sci_get_handle(struct device *dev)
{
        return ERR_PTR(-EINVAL);
}

static inline
const struct ti_sci_handle *ti_sci_get_by_phandle(struct device_node *np,
                                                  const char *property)
{
        return ERR_PTR(-EINVAL);
}

static inline
const struct ti_sci_handle *devm_ti_sci_get_by_phandle(struct device *dev,
                                                       const char *property)
{
        return ERR_PTR(-EINVAL);
}

static inline u16 ti_sci_get_free_resource(struct ti_sci_resource *res)
{
        return TI_SCI_RESOURCE_NULL;
}

static inline void ti_sci_release_resource(struct ti_sci_resource *res, u16 id)
{
}

static inline u32 ti_sci_get_num_resources(struct ti_sci_resource *res)
{
        return 0;
}

static inline struct ti_sci_resource *
devm_ti_sci_get_of_resource(const struct ti_sci_handle *handle,
                            struct device *dev, u32 dev_id, char *of_prop)
{
        return ERR_PTR(-EINVAL);
}

static inline struct ti_sci_resource *
devm_ti_sci_get_resource(const struct ti_sci_handle *handle, struct device *dev,
                         u32 dev_id, u32 sub_type)
{
        return ERR_PTR(-EINVAL);
}
#endif  /* CONFIG_TI_SCI_PROTOCOL */

#endif  /* __TISCI_PROTOCOL_H */