/*
 * CDDL HEADER START
 *
 * The contents of this file are subject to the terms of the
 * Common Development and Distribution License (the "License").
 * You may not use this file except in compliance with the License.
 *
 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
 * or http://www.opensolaris.org/os/licensing.
 * See the License for the specific language governing permissions
 * and limitations under the License.
 *
 * When distributing Covered Code, include this CDDL HEADER in each
 * file and include the License file at usr/src/OPENSOLARIS.LICENSE.
 * If applicable, add the following below this CDDL HEADER, with the
 * fields enclosed by brackets "[]" replaced with your own identifying
 * information: Portions Copyright [yyyy] [name of copyright owner]
 *
 * CDDL HEADER END
 */

/*
 * Copyright (c) 2008, 2010, Oracle and/or its affiliates. All rights reserved.
 */

#ifndef _FRAMEWORK_SES2_H
#define _FRAMEWORK_SES2_H

#ifdef  __cplusplus
extern "C" {
#endif

/*
 * Node properties
 */
typedef enum ses2_element_type {
        SES_ET_UNSPECIFIED = 0,
        SES_ET_DEVICE = 0x1,
        SES_ET_POWER_SUPPLY = 0x2,
        SES_ET_COOLING = 0x3,
        SES_ET_TEMPERATURE_SENSOR = 0x4,
        SES_ET_DOOR_LOCK = 0x5,
        SES_ET_AUDIBLE_ALARM = 0x6,
        SES_ET_ESC_ELECTRONICS = 0x7,
        SES_ET_SCC_ELECTRONICS = 0x8,
        SES_ET_NONVOLATILE_CACHE = 0x9,
        SES_ET_INVALID_OPERATION_REASON = 0xa,
        SES_ET_UPS = 0xb,
        SES_ET_DISPLAY = 0xc,
        SES_ET_KEY_PAD_ENTRY = 0xd,
        SES_ET_ENCLOSURE = 0xe,
        SES_ET_SCSI_PORT_XCVR = 0xf,
        SES_ET_LANGUAGE = 0x10,
        SES_ET_COMMUNICATION_PORT = 0x11,
        SES_ET_VOLTAGE_SENSOR = 0x12,
        SES_ET_CURRENT_SENSOR = 0x13,
        SES_ET_SCSI_TARGET_PORT = 0x14,
        SES_ET_SCSI_INITIATOR_PORT = 0x15,
        SES_ET_SIMPLE_SUBENCLOSURE = 0x16,
        SES_ET_ARRAY_DEVICE = 0x17,
        SES_ET_SAS_EXPANDER = 0x18,
        SES_ET_SAS_CONNECTOR = 0x19
} ses2_element_type_t;

#define SES_PROP_STATUS_CODE            "ses-status-code"
typedef enum ses_element_status_code {
        SES_ESC_UNSUPPORTED = 0,
        SES_ESC_OK = 1,
        SES_ESC_CRITICAL = 2,
        SES_ESC_NONCRITICAL = 3,
        SES_ESC_UNRECOVERABLE = 4,
        SES_ESC_NOT_INSTALLED = 5,
        SES_ESC_UNKNOWN = 6,
        SES_ESC_UNAVAIL = 7,
        SES_ESC_NO_ACCESS = 8
} ses_element_status_code_t;

#define SES_PROP_ELEMENT_CLASS_INDEX    "ses-element-class-index" /* U64 */
#define SES_PROP_ELEMENT_INDEX          "ses-element-index"     /* U64 */
#define SES_PROP_ELEMENT_ONLY_INDEX     "ses-element-only-index" /* U64 */
#define SES_PROP_BAY_NUMBER             "ses-bay-number"        /* U64 */
#define SES_PROP_PRDFAIL                "ses-failure-predicted"
#define SES_PROP_SWAP                   "ses-swapped"
#define SES_PROP_DISABLED               "ses-disabled"
#define SES_PROP_IDENT                  "ses-identify"
#define SES_PROP_WARN                   "ses-warning"
#define SES_PROP_FAIL                   "ses-failed"
#define SES_PROP_WARN_REQ               "ses-warning-indicator-requested"
#define SES_PROP_FAIL_REQ               "ses-failure-indicator-requested"
#define SES_PROP_REPORT                 "ses-reported-via"
#define SES_PROP_RMV                    "ses-ready-to-remove"
#define SES_PROP_OFF                    "ses-off"
#define SES_PROP_REQUESTED_ON           "ses-requested-on"
#define SES_PROP_CLASS_DESCRIPTION      "ses-class-description" /* S */
#define SES_PROP_DESCRIPTION            "ses-description"       /* S */
#define SES_PROP_HOT_SWAP               "ses-hot-swappable"

#define SES_PROP_CRIT_OVER              "ses-critical-over"
#define SES_PROP_CRIT_UNDER             "ses-critical-under"
#define SES_PROP_WARN_OVER              "ses-warning-over"
#define SES_PROP_WARN_UNDER             "ses-warning-under"

#define SES_FC_PROP_NODE_NAME           "ses-fc-node-name"      /* U64 */
#define SES_FC_PROP_LOOP_POS            "ses-fc-loop-position"  /* U64 */
#define SES_FC_PROP_REQ_HARDADDR        "ses-fc-requested-hard-address"
#define SES_FC_PROP_N_PORT_ID           "ses-fc-n_port-identifier" /* U64 */
#define SES_FC_PROP_N_PORT_NAME         "ses-fc-n_port-name"    /* U64 */
#define SES_FC_PROP_PORTS               "ses-fc-ports"          /* NVA */

#define SES_SAS_PROP_DEVICE_TYPE        "ses-sas-device-type"   /* U64 */
/*
 * SAS2r11 7.8.2 Table 123
 */
typedef enum sas_device_type {
        SAS_DT_END_DEVICE = 0x01,
        SAS_DT_EXPANDER = 0x02,
        SAS_DT_LEGACY_EXPANDER = 0x3
} sas_device_type_t;

#define SES_SAS_PROP_SMPI_PORT          "ses-sas-smp-initiator-port"
#define SES_SAS_PROP_STPI_PORT          "ses-sas-stp-initiator-port"
#define SES_SAS_PROP_SSPI_PORT          "ses-sas-ssp-initiator-port"
#define SES_SAS_PROP_SATA_DEVICE        "ses-sas-sata-device"
#define SES_SAS_PROP_SMPT_PORT          "ses-sas-smp-target-port"
#define SES_SAS_PROP_STPT_PORT          "ses-sas-stp-target-port"
#define SES_SAS_PROP_SSPT_PORT          "ses-sas-ssp-target-port"
#define SES_SAS_PROP_ATT_ADDR           "ses-sas-attached-address" /* U64 */
#define SES_SAS_PROP_ADDR               "ses-sas-address"       /* U64 */
#define SES_SAS_PROP_PHY_ID             "ses-sas-phy-identifier" /* U64 */
#define SES_SAS_PROP_PHYS               "ses-sas-phys"          /* NVA */
#define SES_PROP_CE_IDX                 "ses-connector-element-index" /* U64 */
#define SES_PROP_OE_IDX                 "ses-other-element-index" /* U64 */

#define SES_PROP_THRESH_CRIT_HI         "ses-high-critical-threshold" /* U64 */
#define SES_PROP_THRESH_WARN_HI         "ses-high-warning-threshold" /* U64 */
#define SES_PROP_THRESH_CRIT_LO         "ses-low-critical-threshold" /* U64 */
#define SES_PROP_THRESH_WARN_LO         "ses-low-warning-threshold" /* U64 */

/*
 * Audible Alarm properties
 */
#define SES_ALARM_PROP_UNRECOV          "ses-indicating-unrecoverable"
#define SES_ALARM_PROP_CRIT             "ses-indicating-critical"
#define SES_ALARM_PROP_NONCRIT          "ses-indicating-noncritical"
#define SES_ALARM_PROP_INFO             "ses-indicating-informational"
#define SES_ALARM_PROP_REMIND           "ses-reminder-mode"
#define SES_ALARM_PROP_MUTED            "ses-muted"
#define SES_ALARM_PROP_RQST_MUTE        "ses-mute-requested"

/*
 * Nonvolatile Cache properties
 */
#define SES_CACHE_PROP_SIZE             "ses-cache-size"        /* U64 */

/*
 * Cooling Element properties
 */
#define SES_COOLING_PROP_FAN_SPEED      "ses-fan-speed"         /* U64 */
#define SES_COOLING_PROP_SPEED_CODE     "ses-fan-speed-code"    /* U64 */
typedef enum ses_cooling_fan_speed {
        SES_COOLING_FAN_SPEED_STOPPED = 0,
        SES_COOLING_FAN_SPEED_LOWEST = 1,
        SES_COOLING_FAN_SPEED_LOWER = 2,
        SES_COOLING_FAN_SPEED_LOW = 3,
        SES_COOLING_FAN_SPEED_INTERMEDIATE = 4,
        SES_COOLING_FAN_SPEED_HIGH = 5,
        SES_COOLING_FAN_SPEED_HIGHER = 6,
        SES_COOLING_FAN_SPEED_HIGHEST = 7
} ses_cooling_fan_speed_t;

/*
 * Device/Array Device properties
 */
#define SES_DEV_PROP_SLOT_ADDR          "ses-slot-address"      /* U64 */
#define SES_DEV_PROP_PRDFAIL            "ses-failure-predicted"
#define SES_DEV_PROP_READY_TO_INSERT    "ses-ready-to-insert"
#define SES_DEV_PROP_ENC_BYP_A          "ses-enclosure-bypassed-a"
#define SES_DEV_PROP_ENC_BYP_B          "ses-enclosure-bypassed-b"
#define SES_DEV_PROP_DO_NOT_REMOVE      "ses-do-not-remove"
#define SES_DEV_PROP_APP_BYP_A          "ses-app-client-bypassed-a"
#define SES_DEV_PROP_APP_BYP_B          "ses-app-client-bypassed-b"
#define SES_DEV_PROP_DEV_BYP_A          "ses-device-bypassed-a"
#define SES_DEV_PROP_DEV_BYP_B          "ses-device-bypassed-b"
#define SES_DEV_PROP_BYP_A              "ses-bypassed-a"
#define SES_DEV_PROP_BYP_B              "ses-bypassed-b"
#define SES_DEV_PROP_FAULT_RQSTD        "ses-fault-requested"
#define SES_DEV_PROP_FAULT_SENSED       "ses-fault-sensed"
#define SES_DEV_PROP_SAS_NOT_ALL_PHYS   "ses-sas-not-all-phys"

/* Control only */
#define SES_DEV_PROP_REQ_MISSING        "ses-request-missing"
#define SES_DEV_PROP_REQ_ACTIVE         "ses-request-activity"

#define SES_AD_PROP_RR_ABORT            "ses-remap-rebuild-abort"
#define SES_AD_PROP_REBUILD             "ses-remap-rebuild"
#define SES_AD_PROP_IN_FAILED_ARRAY     "ses-in-failed-array"
#define SES_AD_PROP_IN_CRIT_ARRAY       "ses-in-critical-array"
#define SES_AD_PROP_CONS_CHK            "ses-consistency-check"
#define SES_AD_PROP_HOT_SPARE           "ses-hot-spare"
#define SES_AD_PROP_RSVD_DEVICE         "ses-reserved-device"
#define SES_AD_PROP_OK                  "ses-ok"

/*
 * Display Element properties
 */
#define SES_DPY_PROP_CHAR               "ses-displayed-character" /* U16 */
#define SES_DPY_PROP_MODE               "ses-display-mode"      /* U64 */
/*
 * SES-2r17 Table 96, 7.3.14
 */
typedef enum ses_display_mode_ctl {
        SES_DISPLAY_MC_NOCHG = 0,
        SES_DISPLAY_MC_ESP = 1,
        SES_DISPLAY_MC_SET = 2
} ses_display_mode_ctl_t;

typedef enum ses2_display_mode_status {
        SES_DISPLAY_MS_NOTSUP = 0,
        SES_DISPLAY_MS_ESP = 1,
        SES_DISPLAY_MS_SET = 2
} ses_display_mode_status_t;

/*
 * Current Sensor properties
 */
#define SES_CS_PROP_CURRENT_MA          "ses-current"           /* I64 */

/*
 * Door Lock properties
 */
#define SES_LOCK_PROP_UNLOCKED          "ses-unlocked"

/*
 * SCSI Initiator or Target Port properties
 */
#define SES_ITP_PROP_ENABLED            "ses-enabled"

/*
 * Language Module properties
 */
#define SES_LANG_PROP_LANGCODE          "ses-language-code"     /* U64 */

/*
 * SCSI Port/Transceiver properties
 */
#define SES_PX_PROP_XMIT_FAIL           "ses-transmitter-failure"
#define SES_PX_PROP_LOL                 "ses-loss-of-link"

/*
 * Power Supply properties
 */
#define SES_PSU_PROP_DC_OVER_CURRENT    "ses-dc-over-current"
#define SES_PSU_PROP_DC_UNDER_VOLTAGE   "ses-dc-under-voltage"
#define SES_PSU_PROP_DC_OVER_VOLTAGE    "ses-dc-over-voltage"
#define SES_PSU_PROP_DC_FAIL            "ses-dc-fail"
#define SES_PSU_PROP_AC_FAIL            "ses-ac-fail"
#define SES_PSU_PROP_TEMP_WARN          "ses-temperature-warning" /* I64 */
#define SES_PSU_PROP_OVERTEMP_FAIL      "ses-overtemperature-failure"

/*
 * SAS Expander properties
 */
#define SES_EXP_PROP_SAS_ADDR           "ses-expander-sas-address" /* U64 */

/*
 * SAS Connector properties
 */
#define SES_SC_PROP_PHYSICAL_LINK       "ses-sas-physical-link" /* U64 */
#define SES_SC_PROP_CONNECTOR_TYPE      "ses-sas-connector-type" /* U64 */
/*
 * SES2r17 Table 122, 7.3.26
 */
typedef enum ses_sasconn_type {
        SES_SASCONN_T_UNKNOWN = 0,
        SES_SASCONN_T_SFF_8470 = 0x1,
        SES_SASCONN_T_SFF_8088 = 0x2,
        SES_SASCONN_T_VENDOR_EXT = 0xf,
        SES_SASCONN_T_SFF_8484 = 0x10,
        SES_SASCONN_T_SFF_8087 = 0x11,
        SES_SASCONN_T_SFF_8482_R = 0x20,
        SES_SASCONN_T_SATA_HOST = 0x21,
        SES_SASCONN_T_SFF_8482_P = 0x22,
        SES_SASCONN_T_SATA_DEV = 0x23,
        SES_SASCONN_T_VIRTUAL = 0x2f,
        SES_SASCONN_T_VENDOR_INT = 0x3f,
        SES_SASCONN_T_VENDOR_70 = 0x70,
        SES_SASCONN_T_VENDOR_71 = 0x71,
        SES_SASCONN_T_VENDOR_72 = 0x72,
        SES_SASCONN_T_VENDOR_73 = 0x73,
        SES_SASCONN_T_VENDOR_74 = 0x74,
        SES_SASCONN_T_VENDOR_75 = 0x75,
        SES_SASCONN_T_VENDOR_76 = 0x76,
        SES_SASCONN_T_VENDOR_77 = 0x77,
        SES_SASCONN_T_VENDOR_78 = 0x78,
        SES_SASCONN_T_VENDOR_79 = 0x79,
        SES_SASCONN_T_VENDOR_7A = 0x7a,
        SES_SASCONN_T_VENDOR_7B = 0x7b,
        SES_SASCONN_T_VENDOR_7C = 0x7c,
        SES_SASCONN_T_VENDOR_7D = 0x7d,
        SES_SASCONN_T_VENDOR_7E = 0x7e,
        SES_SASCONN_T_VENDOR_7F = 0x7f
} ses_sasconn_type_t;

/*
 * Simple Subenclosure properties
 */
#define SES_SS_PROP_SHORT_STATUS        "ses-short-status"      /* U64 */

/*
 * Temperature Sensor properties
 */
#define SES_TEMP_PROP_TEMP              "ses-temperature"       /* I64 */

/*
 * Uninterruptible Power Supply properties
 */
#define SES_UPS_PROP_TIMELEFT           "ses-battery-time-remaining" /* U64 */
#define SES_UPS_PROP_INTF_FAIL          "ses-interface-failure"
#define SES_UPS_PROP_WARN               "ses-low-battery-warning"
#define SES_UPS_PROP_UPS_FAIL           "ses-ups-failure"
#define SES_UPS_PROP_DC_FAIL            "ses-dc-failure"
#define SES_UPS_PROP_AC_FAIL            "ses-ac-failure"
#define SES_UPS_PROP_AC_QUAL            "ses-ac-quality-exception"
#define SES_UPS_PROP_AC_HI              "ses-ac-overvoltage-exception"
#define SES_UPS_PROP_AC_LO              "ses-ac-undervoltage-exception"
#define SES_UPS_PROP_BPF                "ses-battery-failure-predicted"
#define SES_UPS_PROP_BATT_FAIL          "ses-battery-failure"

/*
 * Voltage Sensor properties
 */
#define SES_VS_PROP_VOLTAGE_MV          "ses-voltage"           /* I64 */

/*
 * Enclosure Services Controller properties (Control only)
 */
#define SES_ESC_PROP_SELECT             "ses-select-element"

/*
 * Primary/Subenclosure properties
 */
#define SES_EN_PROP_EID                 "ses-enclosure-id"      /* U64 */
#define SES_EN_PROP_ESPID               "ses-enclosure-service-proc-id"
#define SES_EN_PROP_NESP                "ses-enclosure-service-proc-count"
#define SES_EN_PROP_LID                 "ses-logical-id"                /* NV */
#define SES_EN_PROP_VID                 "ses-vendor-id"         /* S */
#define SES_EN_PROP_PID                 "ses-product-id"        /* S */
#define SES_EN_PROP_REV                 "ses-product-revision"  /* S */
#define SES_EN_PROP_VS                  "ses-product-vendor-specific" /* BA */

#define SES_EN_PROP_UNRECOV             "ses-status-unrecoverable"
#define SES_EN_PROP_CRIT                "ses-status-critical"
#define SES_EN_PROP_NONCRIT             "ses-status-noncritical"
#define SES_EN_PROP_INFO                "ses-status-informational"
#define SES_EN_PROP_INVOP               "ses-status-invalid-operation"
#define SES_EN_PROP_HELP                "ses-help-text"         /* S */
#define SES_EN_PROP_STRING              "ses-string-in-data"    /* BA */
#define SES_EN_PROP_SHORT               "ses-short-status"      /* U64 */
#define SES_EN_PROP_UCODE               "ses-microcode-dl-status" /* U64 */
typedef enum ses2_dl_ucode_status {
        SES2_DLUCODE_S_NOP = 0,
        SES2_DLUCODE_S_INPROGRESS = 0x1,
        SES2_DLUCODE_S_SAVING = 0x2,
        SES2_DLUCODE_S_INTERIM_3 = 0x3,
        SES2_DLUCODE_S_INTERIM_4 = 0x4,
        SES2_DLUCODE_S_INTERIM_5 = 0x5,
        SES2_DLUCODE_S_INTERIM_6 = 0x6,
        SES2_DLUCODE_S_INTERIM_7 = 0x7,
        SES2_DLUCODE_S_INTERIM_8 = 0x8,
        SES2_DLUCODE_S_INTERIM_9 = 0x9,
        SES2_DLUCODE_S_INTERIM_A = 0xa,
        SES2_DLUCODE_S_INTERIM_B = 0xb,
        SES2_DLUCODE_S_INTERIM_C = 0xc,
        SES2_DLUCODE_S_INTERIM_D = 0xd,
        SES2_DLUCODE_S_INTERIM_E = 0xe,
        SES2_DLUCODE_S_INTERIM_F = 0xf,
        SES2_DLUCODE_S_COMPLETE_NOW = 0x10,
        SES2_DLUCODE_S_COMPLETE_AT_RESET = 0x11,
        SES2_DLUCODE_S_COMPLETE_AT_POWERON = 0x12,
        SES2_DLUCODE_S_VENDOR_70 = 0x70,
        SES2_DLUCODE_S_VENDOR_71 = 0x71,
        SES2_DLUCODE_S_VENDOR_72 = 0x72,
        SES2_DLUCODE_S_VENDOR_73 = 0x73,
        SES2_DLUCODE_S_VENDOR_74 = 0x74,
        SES2_DLUCODE_S_VENDOR_75 = 0x75,
        SES2_DLUCODE_S_VENDOR_76 = 0x76,
        SES2_DLUCODE_S_VENDOR_77 = 0x77,
        SES2_DLUCODE_S_VENDOR_78 = 0x78,
        SES2_DLUCODE_S_VENDOR_79 = 0x79,
        SES2_DLUCODE_S_VENDOR_7A = 0x7a,
        SES2_DLUCODE_S_VENDOR_7B = 0x7b,
        SES2_DLUCODE_S_VENDOR_7C = 0x7c,
        SES2_DLUCODE_S_VENDOR_7D = 0x7d,
        SES2_DLUCODE_S_VENDOR_7E = 0x7e,
        SES2_DLUCODE_S_VENDOR_7F = 0x7f,
        SES2_DLUCODE_S_PAGE_ERR = 0x80,
        SES2_DLUCODE_S_IMAGE_ERR = 0x81,
        SES2_DLUCODE_S_TIMEOUT = 0x82,
        SES2_DLUCODE_S_INTERNAL_NEEDIMAGE = 0x83,
        SES2_DLUCODE_S_INTERNAL_SAFE = 0x84,
        SES2_DLUCODE_S_VENDOR_ERR_F0 = 0xf0,
        SES2_DLUCODE_S_VENDOR_ERR_F1 = 0xf1,
        SES2_DLUCODE_S_VENDOR_ERR_F2 = 0xf2,
        SES2_DLUCODE_S_VENDOR_ERR_F3 = 0xf3,
        SES2_DLUCODE_S_VENDOR_ERR_F4 = 0xf4,
        SES2_DLUCODE_S_VENDOR_ERR_F5 = 0xf5,
        SES2_DLUCODE_S_VENDOR_ERR_F6 = 0xf6,
        SES2_DLUCODE_S_VENDOR_ERR_F7 = 0xf7,
        SES2_DLUCODE_S_VENDOR_ERR_F8 = 0xf8,
        SES2_DLUCODE_S_VENDOR_ERR_F9 = 0xf9,
        SES2_DLUCODE_S_VENDOR_ERR_FA = 0xfa,
        SES2_DLUCODE_S_VENDOR_ERR_FB = 0xfb,
        SES2_DLUCODE_S_VENDOR_ERR_FC = 0xfc,
        SES2_DLUCODE_S_VENDOR_ERR_FD = 0xfd,
        SES2_DLUCODE_S_VENDOR_ERR_FE = 0xfe,
        SES2_DLUCODE_S_VENDOR_ERR_FF = 0xff
} ses2_dl_ucode_status_t;

typedef enum ses_dl_ucode_mode {
        SES_DLUCODE_M_WITH_OFFS = 6,
        SES_DLUCODE_M_WITH_OFFS_SAVE = 7
} ses_dl_ucode_mode_t;

#define SES_EN_PROP_UCODE_A             "ses-microcode-dl-addl-status" /* U64 */
#define SES_EN_PROP_UCODE_SZ            "ses-microcode-maximum-size" /* U64 */
#define SES_EN_PROP_UCODE_BUF           "ses-microcode-buffer-id" /* U64 */
#define SES_EN_PROP_UCODE_OFF           "ses-microcode-buffer-offset" /* U64 */

#define SES_EN_PROP_NICK                "ses-nickname"          /* S */
#define SES_EN_PROP_NICK_STATUS         "ses-nickname-status"   /* U64 */
typedef enum ses_subnick_status {
        SES_SNS_NO_ERROR = 0x0,
        SES_SNS_ERR_PAGE = 0x80,
        SES_SNS_ERR_INT_NICKLOST = 0x81,
        SES_SNS_ERR_INT_PRESERVED = 0x82
} ses_subnick_status_t;

#define SES_EN_PROP_NICK_ADDL_STATUS    "ses-nickname-additional-status"
#define SES_EN_PROP_NICK_LANG           "ses-nickname-language" /* U64 */

#define SES_EN_PROP_POWER_DELAY         "ses-power-cycle-delay" /* U64 */
#define SES_EN_PROP_POWER_DURATION      "ses-power-cycle-duration" /* U64 */
#define SES_EN_PROP_POWER_REQUEST       "ses-power-cycle-request" /* U64 */

typedef enum ses_power_delay {
        SES_PDL_NONE = 0x0,
        SES_PDL_IMMEDIATE = 0x3f
} ses_power_delay_t;

typedef enum ses_power_duration {
        SES_PDR_NONE = 0x0,
        SES_PDR_MANUAL = 0x3f
} ses_power_duration_t;

typedef enum ses_power_request {
        SES_PRQ_NONE = 0x0,
        SES_PRQ_SET = 0x1,
        SES_PRQ_CANCEL = 0x2
} ses_power_request_t;

/*
 * IEEE logical IDs (for SES_EN_PROP_LID)
 */
#define SPC3_NAA_INT                    "naa-id-integer"        /* U64 */
#define SPC3_NAA_ID_TYPE                "naa-id-type"           /* U64 */
#define SPC3_NAA_COMPANY_ID             "naa-company-id"        /* U64 */
#define SPC3_NAA_VS_A                   "naa-vendor-specific-a" /* U64 */
#define SPC3_NAA_VS_B                   "naa-vendor-specific-b" /* U64 */

/*
 * SES-2 Diagnostic page codes (Table 5, 6.1.1).  The set of exported pages
 * constitutes an inter-plugin interface and is therefore part of the public
 * header file.
 */
typedef enum ses2_diag_page {
        SES2_DIAGPAGE_SUPPORTED_PAGES = 0x00,
        SES2_DIAGPAGE_CONFIG = 0x01,
        SES2_DIAGPAGE_ENCLOSURE_CTL_STATUS = 0x02,
        SES2_DIAGPAGE_HELP_TEXT = 0x03,
        SES2_DIAGPAGE_STRING_IO = 0x04,
        SES2_DIAGPAGE_THRESHOLD_IO = 0x05,
        SES2_DIAGPAGE_ELEMENT_DESC = 0x07,
        SES2_DIAGPAGE_SHORT_STATUS = 0x08,
        SES2_DIAGPAGE_ENCLOSURE_BUSY = 0x09,
        SES2_DIAGPAGE_ADDL_ELEM_STATUS = 0x0a,
        SES2_DIAGPAGE_SUBENCLOSURE_HELP_TEXT = 0x0b,
        SES2_DIAGPAGE_SUBENCLOSURE_STRING_IO = 0x0c,
        SES2_DIAGPAGE_SUPPORTED_SES_PAGES = 0x0d,
        SES2_DIAGPAGE_DL_MICROCODE_CTL_STATUS = 0x0e,
        SES2_DIAGPAGE_SUBENCLOSURE_NICKNAME_CTL_STATUS = 0x0f,
        SES2_DIAGPAGE_VENDOR_0 = 0x10,
        SES2_DIAGPAGE_VENDOR_1 = 0x11,
        SES2_DIAGPAGE_VENDOR_2 = 0x12,
        SES2_DIAGPAGE_VENDOR_3 = 0x13,
        SES2_DIAGPAGE_VENDOR_4 = 0x14,
        SES2_DIAGPAGE_VENDOR_5 = 0x15,
        SES2_DIAGPAGE_VENDOR_6 = 0x16,
        SES2_DIAGPAGE_VENDOR_7 = 0x17,
        SES2_DIAGPAGE_VENDOR_8 = 0x18,
        SES2_DIAGPAGE_VENDOR_9 = 0x19,
        SES2_DIAGPAGE_VENDOR_A = 0x1a,
        SES2_DIAGPAGE_VENDOR_B = 0x1b,
        SES2_DIAGPAGE_VENDOR_C = 0x1c,
        SES2_DIAGPAGE_VENDOR_D = 0x1d,
        SES2_DIAGPAGE_VENDOR_E = 0x1e,
        SES2_DIAGPAGE_VENDOR_F = 0x1f
} ses2_diag_page_t;

#define SES_CTL_OP_SETPROP              "ses-ctl-setprop"
#define SES_CTL_OP_DL_UCODE             "ses-ctl-dl-ucode"

#define SES_CTL_PROP_UCODE_DATA         "ses-ctl-ucode-data"
#define SES_CTL_PROP_UCODE_BUFID        "ses-ctl-ucode-bufid"
#define SES_CTL_PROP_UCODE_MODE         "ses-ctl-ucode-mode"
#define SES_CTL_PROP_UCODE_DATA_LEN     "ses-ctl-ucode-data-length" /* U64 */

#ifdef  __cplusplus
}
#endif

#endif  /* _FRAMEWORK_SES2_H */