/*-
 * SPDX-License-Identifier: BSD-3-Clause
 *
 * Copyright (c) 1990, 1991, 1993
 *      The Regents of the University of California.  All rights reserved.
 *
 * This code is derived from the Stanford/CMU enet packet filter,
 * (net/enet.c) distributed as part of 4.3BSD, and code contributed
 * to Berkeley by Steven McCanne and Van Jacobson both of Lawrence
 * Berkeley Laboratory.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of the University nor the names of its contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

#ifdef USB_GLOBAL_INCLUDE_FILE
#include USB_GLOBAL_INCLUDE_FILE
#else
#include <sys/param.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/fcntl.h>
#include <sys/malloc.h>
#include <sys/proc.h>
#include <sys/epoch.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <net/bpf.h>
#include <sys/sysctl.h>

#include <dev/usb/usb.h>
#include <dev/usb/usbdi.h>
#include <dev/usb/usb_busdma.h>
#include <dev/usb/usb_controller.h>
#include <dev/usb/usb_core.h>
#include <dev/usb/usb_process.h>
#include <dev/usb/usb_device.h>
#include <dev/usb/usb_bus.h>
#include <dev/usb/usb_pf.h>
#include <dev/usb/usb_transfer.h>
#endif                  /* USB_GLOBAL_INCLUDE_FILE */

static uint32_t usbpf_aggregate_xferflags(struct usb_xfer_flags *);
static uint32_t usbpf_aggregate_status(struct usb_xfer_flags_int *);
static int usbpf_xfer_frame_is_read(struct usb_xfer *, uint32_t);
static uint32_t usbpf_xfer_precompute_size(struct usb_xfer *, int);

static const struct bif_methods bpf_usb_methods = {
        /*
         * XXXGL: bpf_tap() doesn't check direction, but we actually can
         * report it and make USB dumping able to match direction.
         */
        .bif_chkdir = NULL
};

void
usbpf_attach(struct usb_bus *ubus)
{

        ubus->bpf = bpf_attach(device_get_nameunit(ubus->bdev), DLT_USB,
            USBPF_HDR_LEN, &bpf_usb_methods, ubus);
        if (bootverbose)
                device_printf(ubus->parent, "usbpf: Attached\n");
}

void
usbpf_detach(struct usb_bus *ubus)
{

        bpf_detach(ubus->bpf);
        if (bootverbose)
                device_printf(ubus->parent, "usbpf: Detached\n");
}

static uint32_t
usbpf_aggregate_xferflags(struct usb_xfer_flags *flags)
{
        uint32_t val = 0;

        if (flags->force_short_xfer == 1)
                val |= USBPF_FLAG_FORCE_SHORT_XFER;
        if (flags->short_xfer_ok == 1)
                val |= USBPF_FLAG_SHORT_XFER_OK;
        if (flags->short_frames_ok == 1)
                val |= USBPF_FLAG_SHORT_FRAMES_OK;
        if (flags->pipe_bof == 1)
                val |= USBPF_FLAG_PIPE_BOF;
        if (flags->proxy_buffer == 1)
                val |= USBPF_FLAG_PROXY_BUFFER;
        if (flags->ext_buffer == 1)
                val |= USBPF_FLAG_EXT_BUFFER;
        if (flags->manual_status == 1)
                val |= USBPF_FLAG_MANUAL_STATUS;
        if (flags->no_pipe_ok == 1)
                val |= USBPF_FLAG_NO_PIPE_OK;
        if (flags->stall_pipe == 1)
                val |= USBPF_FLAG_STALL_PIPE;
        return (val);
}

static uint32_t
usbpf_aggregate_status(struct usb_xfer_flags_int *flags)
{
        uint32_t val = 0;

        if (flags->open == 1)
                val |= USBPF_STATUS_OPEN;
        if (flags->transferring == 1)
                val |= USBPF_STATUS_TRANSFERRING;
        if (flags->did_dma_delay == 1)
                val |= USBPF_STATUS_DID_DMA_DELAY;
        if (flags->did_close == 1)
                val |= USBPF_STATUS_DID_CLOSE;
        if (flags->draining == 1)
                val |= USBPF_STATUS_DRAINING;
        if (flags->started == 1)
                val |= USBPF_STATUS_STARTED;
        if (flags->bandwidth_reclaimed == 1)
                val |= USBPF_STATUS_BW_RECLAIMED;
        if (flags->control_xfr == 1)
                val |= USBPF_STATUS_CONTROL_XFR;
        if (flags->control_hdr == 1)
                val |= USBPF_STATUS_CONTROL_HDR;
        if (flags->control_act == 1)
                val |= USBPF_STATUS_CONTROL_ACT;
        if (flags->control_stall == 1)
                val |= USBPF_STATUS_CONTROL_STALL;
        if (flags->short_frames_ok == 1)
                val |= USBPF_STATUS_SHORT_FRAMES_OK;
        if (flags->short_xfer_ok == 1)
                val |= USBPF_STATUS_SHORT_XFER_OK;
#if USB_HAVE_BUSDMA
        if (flags->bdma_enable == 1)
                val |= USBPF_STATUS_BDMA_ENABLE;
        if (flags->bdma_no_post_sync == 1)
                val |= USBPF_STATUS_BDMA_NO_POST_SYNC;
        if (flags->bdma_setup == 1)
                val |= USBPF_STATUS_BDMA_SETUP;
#endif
        if (flags->isochronous_xfr == 1)
                val |= USBPF_STATUS_ISOCHRONOUS_XFR;
        if (flags->curr_dma_set == 1)
                val |= USBPF_STATUS_CURR_DMA_SET;
        if (flags->can_cancel_immed == 1)
                val |= USBPF_STATUS_CAN_CANCEL_IMMED;
        if (flags->doing_callback == 1)
                val |= USBPF_STATUS_DOING_CALLBACK;

        return (val);
}

static int
usbpf_xfer_frame_is_read(struct usb_xfer *xfer, uint32_t frame)
{
        int isread;

        if ((frame == 0) && (xfer->flags_int.control_xfr != 0) &&
            (xfer->flags_int.control_hdr != 0)) {
                /* special case */
                if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
                        /* The device controller writes to memory */
                        isread = 1;
                } else {
                        /* The host controller reads from memory */
                        isread = 0;
                }
        } else {
                isread = USB_GET_DATA_ISREAD(xfer);
        }
        return (isread);
}

static uint32_t
usbpf_xfer_precompute_size(struct usb_xfer *xfer, int type)
{
        uint32_t totlen;
        uint32_t x;
        uint32_t nframes;

        if (type == USBPF_XFERTAP_SUBMIT)
                nframes = xfer->nframes;
        else
                nframes = xfer->aframes;

        totlen = USBPF_HDR_LEN + (USBPF_FRAME_HDR_LEN * nframes);

        /* precompute all trace lengths */
        for (x = 0; x != nframes; x++) {
                if (usbpf_xfer_frame_is_read(xfer, x)) {
                        if (type != USBPF_XFERTAP_SUBMIT) {
                                totlen += USBPF_FRAME_ALIGN(
                                    xfer->frlengths[x]);
                        }
                } else {
                        if (type == USBPF_XFERTAP_SUBMIT) {
                                totlen += USBPF_FRAME_ALIGN(
                                    xfer->frlengths[x]);
                        }
                }
        }
        return (totlen);
}

void
usbpf_xfertap(struct usb_xfer *xfer, int type)
{
        struct epoch_tracker et;
        struct usb_bus *bus;
        struct usbpf_pkthdr *up;
        struct usbpf_framehdr *uf;
        usb_frlength_t offset;
        uint32_t totlen;
        uint32_t frame;
        uint32_t temp;
        uint32_t nframes;
        uint32_t x;
        uint8_t *buf;
        uint8_t *ptr;

        bus = xfer->xroot->bus;

        totlen = usbpf_xfer_precompute_size(xfer, type);

        if (type == USBPF_XFERTAP_SUBMIT)
                nframes = xfer->nframes;
        else
                nframes = xfer->aframes;

        /*
         * XXX TODO XXX
         *
         * When BPF supports it we could pass a fragmented array of
         * buffers avoiding the data copy operation here.
         */
        buf = ptr = malloc(totlen, M_TEMP, M_NOWAIT);
        if (buf == NULL) {
                device_printf(bus->parent, "usbpf: Out of memory\n");
                return;
        }

        up = (struct usbpf_pkthdr *)ptr;
        ptr += USBPF_HDR_LEN;

        /* fill out header */
        temp = device_get_unit(bus->bdev);
        up->up_totlen = htole32(totlen);
        up->up_busunit = htole32(temp);
        up->up_address = xfer->xroot->udev->device_index;
        if (xfer->flags_int.usb_mode == USB_MODE_DEVICE)
                up->up_mode = USBPF_MODE_DEVICE;
        else
                up->up_mode = USBPF_MODE_HOST;
        up->up_type = type;
        up->up_xfertype = xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE;
        temp = usbpf_aggregate_xferflags(&xfer->flags);
        up->up_flags = htole32(temp);
        temp = usbpf_aggregate_status(&xfer->flags_int);
        up->up_status = htole32(temp);
        temp = xfer->error;
        up->up_error = htole32(temp);
        temp = xfer->interval;
        up->up_interval = htole32(temp);
        up->up_frames = htole32(nframes);
        temp = xfer->max_packet_size;
        up->up_packet_size = htole32(temp);
        temp = xfer->max_packet_count;
        up->up_packet_count = htole32(temp);
        temp = xfer->endpointno;
        up->up_endpoint = htole32(temp);
        up->up_speed = xfer->xroot->udev->speed;

        /* clear reserved area */
        memset(up->up_reserved, 0, sizeof(up->up_reserved));

        /* init offset and frame */
        offset = 0;
        frame = 0;

        /* iterate all the USB frames and copy data, if any */
        for (x = 0; x != nframes; x++) {
                uint32_t length;
                int isread;

                /* get length */
                length = xfer->frlengths[x];

                /* get frame header pointer */
                uf = (struct usbpf_framehdr *)ptr;
                ptr += USBPF_FRAME_HDR_LEN;

                /* fill out packet header */
                uf->length = htole32(length);
                uf->flags = 0;

                /* get information about data read/write */
                isread = usbpf_xfer_frame_is_read(xfer, x);

                /* check if we need to copy any data */
                if (isread) {
                        if (type == USBPF_XFERTAP_SUBMIT)
                                length = 0;
                        else {
                                uf->flags |= htole32(
                                    USBPF_FRAMEFLAG_DATA_FOLLOWS);
                        }
                } else {
                        if (type != USBPF_XFERTAP_SUBMIT)
                                length = 0;
                        else {
                                uf->flags |= htole32(
                                    USBPF_FRAMEFLAG_DATA_FOLLOWS);
                        }
                }

                /* check if data is read direction */
                if (isread)
                        uf->flags |= htole32(USBPF_FRAMEFLAG_READ);

                /* copy USB data, if any */
                if (length != 0) {
                        /* copy data */
                        usbd_copy_out(&xfer->frbuffers[frame],
                            offset, ptr, length);

                        /* align length */
                        temp = USBPF_FRAME_ALIGN(length);

                        /* zero pad */
                        if (temp != length)
                                memset(ptr + length, 0, temp - length);

                        ptr += temp;
                }

                if (xfer->flags_int.isochronous_xfr) {
                        offset += usbd_xfer_old_frame_length(xfer, x);
                } else {
                        frame ++;
                }
        }

        NET_EPOCH_ENTER(et);
        bpf_tap(bus->bpf, buf, totlen);
        NET_EPOCH_EXIT(et);

        free(buf, M_TEMP);
}