sys/sys/ata.h - FreeBSD

root/sys/sys/ata.h
/*-
 * SPDX-License-Identifier: BSD-2-Clause
 *
 * Copyright (c) 2000 - 2008 Søren Schmidt <sos@FreeBSD.org>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer,
 *    without modification, immediately at the beginning of the file.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#ifndef _SYS_ATA_H_
#define _SYS_ATA_H_

#include <sys/types.h>
#include <sys/ioccom.h>

/* ATA/ATAPI device parameters */
struct ata_params {
/*000*/ u_int16_t       config;         /* configuration info */
#define ATA_PROTO_MASK                  0x8003
#define ATA_PROTO_ATAPI                 0x8000
#define ATA_PROTO_ATAPI_12              0x8000
#define ATA_PROTO_ATAPI_16              0x8001
#define ATA_PROTO_CFA                   0x848a
#define ATA_ATAPI_TYPE_MASK             0x1f00
#define ATA_ATAPI_TYPE_DIRECT           0x0000  /* disk/floppy */
#define ATA_ATAPI_TYPE_TAPE             0x0100  /* streaming tape */
#define ATA_ATAPI_TYPE_CDROM            0x0500  /* CD-ROM device */
#define ATA_ATAPI_TYPE_OPTICAL          0x0700  /* optical disk */
#define ATA_ATAPI_REMOVABLE             0x0080
#define ATA_DRQ_MASK                    0x0060
#define ATA_DRQ_SLOW                    0x0000  /* cpu 3 ms delay */
#define ATA_DRQ_INTR                    0x0020  /* interrupt 10 ms delay */
#define ATA_DRQ_FAST                    0x0040  /* accel 50 us delay */
#define ATA_RESP_INCOMPLETE             0x0004

/*001*/ u_int16_t       cylinders;              /* # of cylinders */
/*002*/ u_int16_t       specconf;               /* specific configuration */
/*003*/ u_int16_t       heads;                  /* # heads */
        u_int16_t       obsolete4;
        u_int16_t       obsolete5;
/*006*/ u_int16_t       sectors;                /* # sectors/track */
/*007*/ u_int16_t       vendor7[3];
/*010*/ u_int8_t        serial[20];             /* serial number */
/*020*/ u_int16_t       retired20;
        u_int16_t       retired21;
        u_int16_t       obsolete22;
/*023*/ u_int8_t        revision[8];            /* firmware revision */
/*027*/ u_int8_t        model[40];              /* model name */
/*047*/ u_int16_t       sectors_intr;           /* sectors per interrupt */
/*048*/ u_int16_t       tcg;                    /* Trusted Computing Group */
#define ATA_SUPPORT_TCG                 0x0001
/*049*/ u_int16_t       capabilities1;
#define ATA_SUPPORT_DMA                 0x0100
#define ATA_SUPPORT_LBA                 0x0200
#define ATA_SUPPORT_IORDYDIS            0x0400
#define ATA_SUPPORT_IORDY               0x0800
#define ATA_SUPPORT_OVERLAP             0x4000

/*050*/ u_int16_t       capabilities2;
/*051*/ u_int16_t       retired_piomode;        /* PIO modes 0-2 */
#define ATA_RETIRED_PIO_MASK            0x0300

/*052*/ u_int16_t       retired_dmamode;        /* DMA modes */
#define ATA_RETIRED_DMA_MASK            0x0003

/*053*/ u_int16_t       atavalid;               /* fields valid */
#define ATA_FLAG_54_58                  0x0001  /* words 54-58 valid */
#define ATA_FLAG_64_70                  0x0002  /* words 64-70 valid */
#define ATA_FLAG_88                     0x0004  /* word 88 valid */

/*054*/ u_int16_t       current_cylinders;
/*055*/ u_int16_t       current_heads;
/*056*/ u_int16_t       current_sectors;
/*057*/ u_int16_t       current_size_1;
/*058*/ u_int16_t       current_size_2;
/*059*/ u_int16_t       multi;
#define ATA_SUPPORT_BLOCK_ERASE_EXT     0x8000
#define ATA_SUPPORT_OVERWRITE_EXT       0x4000
#define ATA_SUPPORT_CRYPTO_SCRAMBLE_EXT 0x2000
#define ATA_SUPPORT_SANITIZE            0x1000
#define ATA_SUPPORT_SANITIZE_ALLOWED    0x0800
#define ATA_SUPPORT_ANTIFREEZE_LOCK_EXT 0x0400
#define ATA_MULTI_VALID                 0x0100

/*060*/ u_int16_t       lba_size_1;
        u_int16_t       lba_size_2;
        u_int16_t       obsolete62;
/*063*/ u_int16_t       mwdmamodes;             /* multiword DMA modes */
/*064*/ u_int16_t       apiomodes;              /* advanced PIO modes */

/*065*/ u_int16_t       mwdmamin;               /* min. M/W DMA time/word ns */
/*066*/ u_int16_t       mwdmarec;               /* rec. M/W DMA time ns */
/*067*/ u_int16_t       pioblind;               /* min. PIO cycle w/o flow */
/*068*/ u_int16_t       pioiordy;               /* min. PIO cycle IORDY flow */
/*069*/ u_int16_t       support3;
#define ATA_SUPPORT_RZAT                0x0020
#define ATA_SUPPORT_DRAT                0x4000
#define ATA_ENCRYPTS_ALL_USER_DATA      0x0010  /* Self-encrypting drive */
#define ATA_SUPPORT_ZONE_MASK           0x0003
#define ATA_SUPPORT_ZONE_NR             0x0000
#define ATA_SUPPORT_ZONE_HOST_AWARE     0x0001
#define ATA_SUPPORT_ZONE_DEV_MANAGED    0x0002
        u_int16_t       reserved70;
/*071*/ u_int16_t       rlsovlap;               /* rel time (us) for overlap */
/*072*/ u_int16_t       rlsservice;             /* rel time (us) for service */
        u_int16_t       reserved73;
        u_int16_t       reserved74;
/*075*/ u_int16_t       queue;
#define ATA_QUEUE_LEN(x)                ((x) & 0x001f)

/*76*/  u_int16_t       satacapabilities;
#define ATA_SATA_GEN1                   0x0002
#define ATA_SATA_GEN2                   0x0004
#define ATA_SATA_GEN3                   0x0008
#define ATA_SUPPORT_NCQ                 0x0100
#define ATA_SUPPORT_IFPWRMNGTRCV        0x0200
#define ATA_SUPPORT_PHYEVENTCNT         0x0400
#define ATA_SUPPORT_NCQ_UNLOAD          0x0800
#define ATA_SUPPORT_NCQ_PRIO            0x1000
#define ATA_SUPPORT_HAPST               0x2000
#define ATA_SUPPORT_DAPST               0x4000
#define ATA_SUPPORT_READLOGDMAEXT       0x8000

/*77*/  u_int16_t       satacapabilities2;
#define ATA_SATA_CURR_GEN_MASK          0x0006
#define ATA_SUPPORT_NCQ_STREAM          0x0010
#define ATA_SUPPORT_NCQ_NON_DATA        0x0020
#define ATA_SUPPORT_NCQ_QMANAGEMENT     ATA_SUPPORT_NCQ_NON_DATA
#define ATA_SUPPORT_RCVSND_FPDMA_QUEUED 0x0040
/*78*/  u_int16_t       satasupport;
#define ATA_SUPPORT_NONZERO             0x0002
#define ATA_SUPPORT_AUTOACTIVATE        0x0004
#define ATA_SUPPORT_IFPWRMNGT           0x0008
#define ATA_SUPPORT_INORDERDATA         0x0010
#define ATA_SUPPORT_ASYNCNOTIF          0x0020
#define ATA_SUPPORT_SOFTSETPRESERVE     0x0040
#define ATA_SUPPORT_NCQ_AUTOSENSE       0x0080
/*79*/  u_int16_t       sataenabled;
#define ATA_ENABLED_DAPST               0x0080

/*080*/ u_int16_t       version_major;
/*081*/ u_int16_t       version_minor;

        struct {
/*082/085*/ u_int16_t   command1;
#define ATA_SUPPORT_SMART               0x0001
#define ATA_SUPPORT_SECURITY            0x0002
#define ATA_SUPPORT_REMOVABLE           0x0004
#define ATA_SUPPORT_POWERMGT            0x0008
#define ATA_SUPPORT_PACKET              0x0010
#define ATA_SUPPORT_WRITECACHE          0x0020
#define ATA_SUPPORT_LOOKAHEAD           0x0040
#define ATA_SUPPORT_RELEASEIRQ          0x0080
#define ATA_SUPPORT_SERVICEIRQ          0x0100
#define ATA_SUPPORT_RESET               0x0200
#define ATA_SUPPORT_PROTECTED           0x0400
#define ATA_SUPPORT_WRITEBUFFER         0x1000
#define ATA_SUPPORT_READBUFFER          0x2000
#define ATA_SUPPORT_NOP                 0x4000

/*083/086*/ u_int16_t   command2;
#define ATA_SUPPORT_MICROCODE           0x0001
#define ATA_SUPPORT_QUEUED              0x0002
#define ATA_SUPPORT_CFA                 0x0004
#define ATA_SUPPORT_APM                 0x0008
#define ATA_SUPPORT_NOTIFY              0x0010
#define ATA_SUPPORT_STANDBY             0x0020
#define ATA_SUPPORT_SPINUP              0x0040
#define ATA_SUPPORT_MAXSECURITY         0x0100
#define ATA_SUPPORT_AUTOACOUSTIC        0x0200
#define ATA_SUPPORT_ADDRESS48           0x0400
#define ATA_SUPPORT_OVERLAY             0x0800
#define ATA_SUPPORT_FLUSHCACHE          0x1000
#define ATA_SUPPORT_FLUSHCACHE48        0x2000

/*084/087*/ u_int16_t   extension;
#define ATA_SUPPORT_SMARTLOG            0x0001
#define ATA_SUPPORT_SMARTTEST           0x0002
#define ATA_SUPPORT_MEDIASN             0x0004
#define ATA_SUPPORT_MEDIAPASS           0x0008
#define ATA_SUPPORT_STREAMING           0x0010
#define ATA_SUPPORT_GENLOG              0x0020
#define ATA_SUPPORT_WRITEDMAFUAEXT      0x0040
#define ATA_SUPPORT_WRITEDMAQFUAEXT     0x0080
#define ATA_SUPPORT_64BITWWN            0x0100
#define ATA_SUPPORT_UNLOAD              0x2000
        } __packed support, enabled;

/*088*/ u_int16_t       udmamodes;              /* UltraDMA modes */
/*089*/ u_int16_t       erase_time;             /* time req'd in 2min units */
/*090*/ u_int16_t       enhanced_erase_time;    /* time req'd in 2min units */
/*091*/ u_int16_t       apm_value;
/*092*/ u_int16_t       master_passwd_revision; /* password revision code */
/*093*/ u_int16_t       hwres;
#define ATA_CABLE_ID                    0x2000

/*094*/ u_int16_t       acoustic;
#define ATA_ACOUSTIC_CURRENT(x)         ((x) & 0x00ff)
#define ATA_ACOUSTIC_VENDOR(x)          (((x) & 0xff00) >> 8)

/*095*/ u_int16_t       stream_min_req_size;
/*096*/ u_int16_t       stream_transfer_time;
/*097*/ u_int16_t       stream_access_latency;
/*098*/ u_int32_t       stream_granularity;
/*100*/ u_int16_t       lba_size48_1;
        u_int16_t       lba_size48_2;
        u_int16_t       lba_size48_3;
        u_int16_t       lba_size48_4;
        u_int16_t       reserved104;
/*105*/ u_int16_t       max_dsm_blocks;
/*106*/ u_int16_t       pss;
#define ATA_PSS_LSPPS                   0x000F
#define ATA_PSS_LSSABOVE512             0x1000
#define ATA_PSS_MULTLS                  0x2000
#define ATA_PSS_VALID_MASK              0xC000
#define ATA_PSS_VALID_VALUE             0x4000
/*107*/ u_int16_t       isd;
/*108*/ u_int16_t       wwn[4];
        u_int16_t       reserved112[5];
/*117*/ u_int16_t       lss_1;
/*118*/ u_int16_t       lss_2;
/*119*/ u_int16_t       support2;
#define ATA_SUPPORT_WRITEREADVERIFY     0x0002
#define ATA_SUPPORT_WRITEUNCORREXT      0x0004
#define ATA_SUPPORT_RWLOGDMAEXT         0x0008
#define ATA_SUPPORT_MICROCODE3          0x0010
#define ATA_SUPPORT_FREEFALL            0x0020
#define ATA_SUPPORT_SENSE_REPORT        0x0040
#define ATA_SUPPORT_EPC                 0x0080
#define ATA_SUPPORT_AMAX_ADDR           0x0100
#define ATA_SUPPORT_DSN                 0x0200
/*120*/ u_int16_t       enabled2;
#define ATA_ENABLED_WRITEREADVERIFY     0x0002
#define ATA_ENABLED_WRITEUNCORREXT      0x0004
#define ATA_ENABLED_FREEFALL            0x0020
#define ATA_ENABLED_SENSE_REPORT        0x0040
#define ATA_ENABLED_EPC                 0x0080
#define ATA_ENABLED_DSN                 0x0200
        u_int16_t       reserved121[6];
/*127*/ u_int16_t       removable_status;
/*128*/ u_int16_t       security_status;
#define ATA_SECURITY_LEVEL              0x0100  /* 0: high, 1: maximum */
#define ATA_SECURITY_ENH_SUPP           0x0020  /* enhanced erase supported */
#define ATA_SECURITY_COUNT_EXP          0x0010  /* count expired */
#define ATA_SECURITY_FROZEN             0x0008  /* security config is frozen */
#define ATA_SECURITY_LOCKED             0x0004  /* drive is locked */
#define ATA_SECURITY_ENABLED            0x0002  /* ATA Security is enabled */
#define ATA_SECURITY_SUPPORTED          0x0001  /* ATA Security is supported */

        u_int16_t       reserved129[31];
/*160*/ u_int16_t       cfa_powermode1;
        u_int16_t       reserved161;
/*162*/ u_int16_t       cfa_kms_support;
/*163*/ u_int16_t       cfa_trueide_modes;
/*164*/ u_int16_t       cfa_memory_modes;
        u_int16_t       reserved165[3];
/*168*/ u_int16_t       form_factor;
#define ATA_FORM_FACTOR_MASK            0x000f
#define ATA_FORM_FACTOR_NOT_REPORTED    0x0000
#define ATA_FORM_FACTOR_5_25            0x0001
#define ATA_FORM_FACTOR_3_5             0x0002
#define ATA_FORM_FACTOR_2_5             0x0003
#define ATA_FORM_FACTOR_1_8             0x0004
#define ATA_FORM_FACTOR_SUB_1_8         0x0005
#define ATA_FORM_FACTOR_MSATA           0x0006
#define ATA_FORM_FACTOR_M_2             0x0007
#define ATA_FORM_FACTOR_MICRO_SSD       0x0008
#define ATA_FORM_FACTOR_C_FAST          0x0009
/*169*/ u_int16_t       support_dsm;
#define ATA_SUPPORT_DSM_TRIM            0x0001
/*170*/ u_int8_t        product_id[8];  /* Additional Product Identifier */
        u_int16_t       reserved174[2];
/*176*/ u_int8_t        media_serial[60];
/*206*/ u_int16_t       sct;
        u_int16_t       reserved207[2];
/*209*/ u_int16_t       lsalign;
/*210*/ u_int16_t       wrv_sectors_m3_1;
        u_int16_t       wrv_sectors_m3_2;
/*212*/ u_int16_t       wrv_sectors_m2_1;
        u_int16_t       wrv_sectors_m2_2;
/*214*/ u_int16_t       nv_cache_caps;
/*215*/ u_int16_t       nv_cache_size_1;
        u_int16_t       nv_cache_size_2;
/*217*/ u_int16_t       media_rotation_rate;
#define ATA_RATE_NOT_REPORTED           0x0000
#define ATA_RATE_NON_ROTATING           0x0001
        u_int16_t       reserved218;
/*219*/ u_int16_t       nv_cache_opt;
/*220*/ u_int16_t       wrv_mode;
        u_int16_t       reserved221;
/*222*/ u_int16_t       transport_major;
/*223*/ u_int16_t       transport_minor;
        u_int16_t       reserved224[31];
/*255*/ u_int16_t       integrity;
} __packed __aligned(2);

/* ATA Dataset Management */
#define ATA_DSM_BLK_SIZE        512
#define ATA_DSM_BLK_RANGES      64
#define ATA_DSM_RANGE_SIZE      8
#define ATA_DSM_RANGE_MAX       65535

/*
 * ATA Device Register
 *
 * bit 7 Obsolete (was 1 in early ATA specs)
 * bit 6 Sets LBA/CHS mode. 1=LBA, 0=CHS 
 * bit 5 Obsolete (was 1 in early ATA specs)
 * bit 4 1 = Slave Drive, 0 = Master Drive
 * bit 3-0 In LBA mode, 27-24 of address. In CHS mode, head number
*/

#define ATA_DEV_MASTER          0x00
#define ATA_DEV_SLAVE           0x10
#define ATA_DEV_LBA             0x40

/* ATA limits */
#define ATA_MAX_28BIT_LBA       268435455UL

/* ATA Status Register */
#define ATA_STATUS_ERROR                0x01
#define ATA_STATUS_SENSE_AVAIL          0x02
#define ATA_STATUS_ALIGN_ERR            0x04
#define ATA_STATUS_DATA_REQ             0x08
#define ATA_STATUS_DEF_WRITE_ERR        0x10
#define ATA_STATUS_DEVICE_FAULT         0x20
#define ATA_STATUS_DEVICE_READY         0x40
#define ATA_STATUS_BUSY                 0x80

/* ATA Error Register */
/* COMMAND TIMEOUT              0x01 */
#define ATA_ERROR_ABORT         0x04
#define ATA_ERROR_ID_NOT_FOUND  0x10
/* UNCORRECTABLE ERROR          0x40 */
/* INTERFACE CRC                0x80 */

/* ATA HPA Features */
#define ATA_HPA_FEAT_MAX_ADDR   0x00
#define ATA_HPA_FEAT_SET_PWD    0x01
#define ATA_HPA_FEAT_LOCK       0x02
#define ATA_HPA_FEAT_UNLOCK     0x03
#define ATA_HPA_FEAT_FREEZE     0x04

/* ATA transfer modes */
#define ATA_MODE_MASK           0x0f
#define ATA_DMA_MASK            0xf0
#define ATA_PIO                 0x00
#define ATA_PIO0                0x08
#define ATA_PIO1                0x09
#define ATA_PIO2                0x0a
#define ATA_PIO3                0x0b
#define ATA_PIO4                0x0c
#define ATA_PIO_MAX             0x0f
#define ATA_DMA                 0x10
#define ATA_WDMA0               0x20
#define ATA_WDMA1               0x21
#define ATA_WDMA2               0x22
#define ATA_UDMA0               0x40
#define ATA_UDMA1               0x41
#define ATA_UDMA2               0x42
#define ATA_UDMA3               0x43
#define ATA_UDMA4               0x44
#define ATA_UDMA5               0x45
#define ATA_UDMA6               0x46
#define ATA_SA150               0x47
#define ATA_SA300               0x48
#define ATA_SA600               0x49
#define ATA_DMA_MAX             0x4f

/* ATA commands */
#define ATA_NOP                         0x00    /* NOP */
#define         ATA_NF_FLUSHQUEUE       0x00    /* flush queued cmd's */
#define         ATA_NF_AUTOPOLL         0x01    /* start autopoll function */
#define ATA_DATA_SET_MANAGEMENT         0x06
#define         ATA_DSM_TRIM            0x01
#define ATA_DEVICE_RESET                0x08    /* reset device */
#define ATA_READ                        0x20    /* read */
#define ATA_READ48                      0x24    /* read 48bit LBA */
#define ATA_READ_DMA48                  0x25    /* read DMA 48bit LBA */
#define ATA_READ_DMA_QUEUED48           0x26    /* read DMA QUEUED 48bit LBA */
#define ATA_READ_NATIVE_MAX_ADDRESS48   0x27    /* read native max addr 48bit */
#define ATA_READ_MUL48                  0x29    /* read multi 48bit LBA */
#define ATA_READ_STREAM_DMA48           0x2a    /* read DMA stream 48bit LBA */
#define ATA_READ_LOG_EXT                0x2f    /* read log ext - PIO Data-In */
#define ATA_READ_STREAM48               0x2b    /* read stream 48bit LBA */
#define ATA_WRITE                       0x30    /* write */
#define ATA_WRITE48                     0x34    /* write 48bit LBA */
#define ATA_WRITE_DMA48                 0x35    /* write DMA 48bit LBA */
#define ATA_WRITE_DMA_QUEUED48          0x36    /* write DMA QUEUED 48bit LBA*/
#define ATA_SET_MAX_ADDRESS48           0x37    /* set max address 48bit */
#define ATA_WRITE_MUL48                 0x39    /* write multi 48bit LBA */
#define ATA_WRITE_STREAM_DMA48          0x3a
#define ATA_WRITE_STREAM48              0x3b
#define ATA_WRITE_DMA_FUA48             0x3d
#define ATA_WRITE_DMA_QUEUED_FUA48      0x3e
#define ATA_WRITE_LOG_EXT               0x3f
#define ATA_READ_VERIFY                 0x40
#define ATA_READ_VERIFY48               0x42
#define ATA_WRITE_UNCORRECTABLE48       0x45    /* write uncorrectable 48bit LBA */
#define         ATA_WU_PSEUDO           0x55    /* pseudo-uncorrectable error */
#define         ATA_WU_FLAGGED          0xaa    /* flagged-uncorrectable error */
#define ATA_READ_LOG_DMA_EXT            0x47    /* read log DMA ext - PIO Data-In */
#define ATA_ZAC_MANAGEMENT_IN           0x4a    /* ZAC management in */
#define         ATA_ZM_REPORT_ZONES     0x00    /* report zones */
#define ATA_WRITE_LOG_DMA_EXT           0x57    /* WRITE LOG DMA EXT */
#define ATA_TRUSTED_NON_DATA            0x5b    /* TRUSTED NON-DATA */
#define ATA_TRUSTED_RECEIVE             0x5c    /* TRUSTED RECEIVE */
#define ATA_TRUSTED_RECEIVE_DMA         0x5d    /* TRUSTED RECEIVE DMA */
#define ATA_TRUSTED_SEND                0x5e    /* TRUSTED SEND */
#define ATA_TRUSTED_SEND_DMA            0x5f    /* TRUSTED SEND DMA */
#define ATA_READ_FPDMA_QUEUED           0x60    /* read DMA NCQ */
#define ATA_WRITE_FPDMA_QUEUED          0x61    /* write DMA NCQ */
#define ATA_NCQ_NON_DATA                0x63    /* NCQ non-data command */
#define         ATA_ABORT_NCQ_QUEUE     0x00    /* abort NCQ queue */
#define         ATA_DEADLINE_HANDLING   0x01    /* deadline handling */
#define         ATA_SET_FEATURES        0x05    /* set features */
#define         ATA_ZERO_EXT            0x06    /* zero ext */
#define         ATA_NCQ_ZAC_MGMT_OUT    0x07    /* NCQ ZAC mgmt out no data */
#define ATA_SEND_FPDMA_QUEUED           0x64    /* send DMA NCQ */
#define         ATA_SFPDMA_DSM          0x00    /* Data set management */
#define                 ATA_SFPDMA_DSM_TRIM     0x01    /* Set trim bit in auxiliary */
#define         ATA_SFPDMA_HYBRID_EVICT 0x01    /* Hybrid Evict */
#define         ATA_SFPDMA_WLDMA        0x02    /* Write Log DMA EXT */
#define         ATA_SFPDMA_ZAC_MGMT_OUT 0x03    /* NCQ ZAC mgmt out w/data */
#define ATA_RECV_FPDMA_QUEUED           0x65    /* receive DMA NCQ */
#define         ATA_RFPDMA_RL_DMA_EXT   0x00    /* Read Log DMA EXT */
#define         ATA_RFPDMA_ZAC_MGMT_IN  0x02    /* NCQ ZAC mgmt in w/data */
#define ATA_SEP_ATTN                    0x67    /* SEP request */
#define ATA_SEEK                        0x70    /* seek */
#define ATA_AMAX_ADDR                   0x78    /* Accessible Max Address */
#define         ATA_AMAX_ADDR_GET       0x00    /* GET NATIVE MAX ADDRESS EXT */
#define         ATA_AMAX_ADDR_SET       0x01    /* SET ACCESSIBLE MAX ADDRESS EXT */
#define         ATA_AMAX_ADDR_FREEZE    0x02    /* FREEZE ACCESSIBLE MAX ADDRESS EXT */
#define ATA_ZAC_MANAGEMENT_OUT          0x9f    /* ZAC management out */
#define         ATA_ZM_CLOSE_ZONE       0x01    /* close zone */
#define         ATA_ZM_FINISH_ZONE      0x02    /* finish zone */
#define         ATA_ZM_OPEN_ZONE        0x03    /* open zone */
#define         ATA_ZM_RWP              0x04    /* reset write pointer */
#define ATA_DOWNLOAD_MICROCODE          0x92    /* DOWNLOAD MICROCODE */
#define ATA_DOWNLOAD_MICROCODE_DMA      0x93    /* DOWNLOAD MICROCODE DMA */
#define ATA_PACKET_CMD                  0xa0    /* packet command */
#define ATA_ATAPI_IDENTIFY              0xa1    /* get ATAPI params*/
#define ATA_SERVICE                     0xa2    /* service command */
#define ATA_SMART_CMD                   0xb0    /* SMART command */
#define ATA_SANITIZE                    0xb4    /* sanitize device */
#define ATA_CFA_ERASE                   0xc0    /* CFA erase */
#define ATA_READ_MUL                    0xc4    /* read multi */
#define ATA_WRITE_MUL                   0xc5    /* write multi */
#define ATA_SET_MULTI                   0xc6    /* set multi size */
#define ATA_READ_DMA_QUEUED             0xc7    /* read DMA QUEUED */
#define ATA_READ_DMA                    0xc8    /* read DMA */
#define ATA_WRITE_DMA                   0xca    /* write DMA */
#define ATA_WRITE_DMA_QUEUED            0xcc    /* write DMA QUEUED */
#define ATA_WRITE_MUL_FUA48             0xce
#define ATA_STANDBY_IMMEDIATE           0xe0    /* standby immediate */
#define ATA_IDLE_IMMEDIATE              0xe1    /* idle immediate */
#define ATA_STANDBY_CMD                 0xe2    /* standby */
#define ATA_IDLE_CMD                    0xe3    /* idle */
#define ATA_READ_BUFFER                 0xe4    /* read buffer */
#define ATA_READ_PM                     0xe4    /* read portmultiplier */
#define ATA_CHECK_POWER_MODE            0xe5    /* device power mode */
#define         ATA_PM_STANDBY          0x00    /* standby, also ATA_EPC_STANDBY_Z */
#define         ATA_PM_STANDBY_Y        0x01    /* standby, also ATA_EPC_STANDBY_Y */
#define         ATA_PM_IDLE             0x80    /* idle */
#define         ATA_PM_IDLE_A           0x81    /* idle, also ATA_EPC_IDLE_A */
#define         ATA_PM_IDLE_B           0x82    /* idle, also ATA_EPC_IDLE_B */
#define         ATA_PM_IDLE_C           0x83    /* idle, also ATA_EPC_IDLE_C */
#define         ATA_PM_ACTIVE_IDLE      0xff    /* active or idle */
#define ATA_SLEEP                       0xe6    /* sleep */
#define ATA_FLUSHCACHE                  0xe7    /* flush cache to disk */
#define ATA_WRITE_BUFFER                0xe8    /* write buffer */
#define ATA_WRITE_PM                    0xe8    /* write portmultiplier */
#define ATA_READ_BUFFER_DMA             0xe9    /* read buffer DMA */
#define ATA_FLUSHCACHE48                0xea    /* flush cache to disk */
#define ATA_WRITE_BUFFER_DMA            0xeb    /* write buffer DMA */
#define ATA_ATA_IDENTIFY                0xec    /* get ATA params */
#define ATA_SETFEATURES                 0xef    /* features command */
#define         ATA_SF_ENAB_WCACHE      0x02    /* enable write cache */
#define         ATA_SF_DIS_WCACHE       0x82    /* disable write cache */
#define         ATA_SF_SETXFER          0x03    /* set transfer mode */
#define         ATA_SF_APM              0x05    /* Enable APM feature set */
#define         ATA_SF_ENAB_PUIS        0x06    /* enable PUIS */
#define         ATA_SF_DIS_PUIS         0x86    /* disable PUIS */
#define         ATA_SF_PUIS_SPINUP      0x07    /* PUIS spin-up */
#define         ATA_SF_WRV              0x0b    /* Enable Write-Read-Verify */
#define         ATA_SF_DLC              0x0c    /* Enable device life control */
#define         ATA_SF_SATA             0x10    /* Enable use of SATA feature */
#define         ATA_SF_FFC              0x41    /* Free-fall Control */
#define         ATA_SF_MHIST            0x43    /* Set Max Host Sect. Times */
#define         ATA_SF_RATE             0x45    /* Set Rate Basis */
#define         ATA_SF_EPC              0x4A    /* Extended Power Conditions */
#define         ATA_SF_ENAB_RCACHE      0xaa    /* enable readahead cache */
#define         ATA_SF_DIS_RCACHE       0x55    /* disable readahead cache */
#define         ATA_SF_ENAB_RELIRQ      0x5d    /* enable release interrupt */
#define         ATA_SF_DIS_RELIRQ       0xdd    /* disable release interrupt */
#define         ATA_SF_ENAB_SRVIRQ      0x5e    /* enable service interrupt */
#define         ATA_SF_DIS_SRVIRQ       0xde    /* disable service interrupt */
#define         ATA_SF_LPSAERC          0x62    /* Long Phys Sect Align ErrRep*/
#define         ATA_SF_DSN              0x63    /* Device Stats Notification */
#define ATA_SECURITY_SET_PASSWORD       0xf1    /* set drive password */
#define ATA_SECURITY_UNLOCK             0xf2    /* unlock drive using passwd */
#define ATA_SECURITY_ERASE_PREPARE      0xf3    /* prepare to erase drive */
#define ATA_SECURITY_ERASE_UNIT         0xf4    /* erase all blocks on drive */
#define ATA_SECURITY_FREEZE_LOCK        0xf5    /* freeze security config */
#define ATA_SECURITY_DISABLE_PASSWORD   0xf6    /* disable drive password */
#define ATA_READ_NATIVE_MAX_ADDRESS     0xf8    /* read native max address */
#define ATA_SET_MAX_ADDRESS             0xf9    /* set max address */

/* ATAPI commands */
#define ATAPI_TEST_UNIT_READY           0x00    /* check if device is ready */
#define ATAPI_REZERO                    0x01    /* rewind */
#define ATAPI_REQUEST_SENSE             0x03    /* get sense data */
#define ATAPI_FORMAT                    0x04    /* format unit */
#define ATAPI_READ                      0x08    /* read data */
#define ATAPI_WRITE                     0x0a    /* write data */
#define ATAPI_WEOF                      0x10    /* write filemark */
#define         ATAPI_WF_WRITE          0x01
#define ATAPI_SPACE                     0x11    /* space command */
#define         ATAPI_SP_FM             0x01
#define         ATAPI_SP_EOD            0x03
#define ATAPI_INQUIRY                   0x12    /* get inquiry data */
#define ATAPI_MODE_SELECT               0x15    /* mode select */
#define ATAPI_ERASE                     0x19    /* erase */
#define ATAPI_MODE_SENSE                0x1a    /* mode sense */
#define ATAPI_START_STOP                0x1b    /* start/stop unit */
#define         ATAPI_SS_LOAD           0x01
#define         ATAPI_SS_RETENSION      0x02
#define         ATAPI_SS_EJECT          0x04
#define ATAPI_PREVENT_ALLOW             0x1e    /* media removal */
#define ATAPI_READ_FORMAT_CAPACITIES    0x23    /* get format capacities */
#define ATAPI_READ_CAPACITY             0x25    /* get volume capacity */
#define ATAPI_READ_BIG                  0x28    /* read data */
#define ATAPI_WRITE_BIG                 0x2a    /* write data */
#define ATAPI_LOCATE                    0x2b    /* locate to position */
#define ATAPI_READ_POSITION             0x34    /* read position */
#define ATAPI_SYNCHRONIZE_CACHE         0x35    /* flush buf, close channel */
#define ATAPI_WRITE_BUFFER              0x3b    /* write device buffer */
#define ATAPI_READ_BUFFER               0x3c    /* read device buffer */
#define ATAPI_READ_SUBCHANNEL           0x42    /* get subchannel info */
#define ATAPI_READ_TOC                  0x43    /* get table of contents */
#define ATAPI_PLAY_10                   0x45    /* play by lba */
#define ATAPI_PLAY_MSF                  0x47    /* play by MSF address */
#define ATAPI_PLAY_TRACK                0x48    /* play by track number */
#define ATAPI_PAUSE                     0x4b    /* pause audio operation */
#define ATAPI_READ_DISK_INFO            0x51    /* get disk info structure */
#define ATAPI_READ_TRACK_INFO           0x52    /* get track info structure */
#define ATAPI_RESERVE_TRACK             0x53    /* reserve track */
#define ATAPI_SEND_OPC_INFO             0x54    /* send OPC structurek */
#define ATAPI_MODE_SELECT_BIG           0x55    /* set device parameters */
#define ATAPI_REPAIR_TRACK              0x58    /* repair track */
#define ATAPI_READ_MASTER_CUE           0x59    /* read master CUE info */
#define ATAPI_MODE_SENSE_BIG            0x5a    /* get device parameters */
#define ATAPI_CLOSE_TRACK               0x5b    /* close track/session */
#define ATAPI_READ_BUFFER_CAPACITY      0x5c    /* get buffer capicity */
#define ATAPI_SEND_CUE_SHEET            0x5d    /* send CUE sheet */
#define ATAPI_SERVICE_ACTION_IN         0x96    /* get service data */
#define ATAPI_BLANK                     0xa1    /* blank the media */
#define ATAPI_SEND_KEY                  0xa3    /* send DVD key structure */
#define ATAPI_REPORT_KEY                0xa4    /* get DVD key structure */
#define ATAPI_PLAY_12                   0xa5    /* play by lba */
#define ATAPI_LOAD_UNLOAD               0xa6    /* changer control command */
#define ATAPI_READ_STRUCTURE            0xad    /* get DVD structure */
#define ATAPI_PLAY_CD                   0xb4    /* universal play command */
#define ATAPI_SET_SPEED                 0xbb    /* set drive speed */
#define ATAPI_MECH_STATUS               0xbd    /* get changer status */
#define ATAPI_READ_CD                   0xbe    /* read data */
#define ATAPI_POLL_DSC                  0xff    /* poll DSC status bit */

struct ata_ioc_devices {
    int                 channel;
    char                name[2][32];
    struct ata_params   params[2];
};

/* pr channel ATA ioctl calls */
#define IOCATAGMAXCHANNEL       _IOR('a',  1, int)
#define IOCATAREINIT            _IOW('a',  2, int)
#define IOCATAATTACH            _IOW('a',  3, int)
#define IOCATADETACH            _IOW('a',  4, int)
#define IOCATADEVICES           _IOWR('a',  5, struct ata_ioc_devices)

/* ATAPI request sense structure */
struct atapi_sense {
    u_int8_t    error;                          /* current or deferred errors */
#define ATA_SENSE_VALID                 0x80

    u_int8_t    segment;                        /* segment number */
    u_int8_t    key;                            /* sense key */
#define ATA_SENSE_KEY_MASK              0x0f    /* sense key mask */
#define ATA_SENSE_NO_SENSE              0x00    /* no specific sense key info */
#define ATA_SENSE_RECOVERED_ERROR       0x01    /* command OK, data recovered */
#define ATA_SENSE_NOT_READY             0x02    /* no access to drive */
#define ATA_SENSE_MEDIUM_ERROR          0x03    /* non-recovered data error */
#define ATA_SENSE_HARDWARE_ERROR        0x04    /* non-recoverable HW failure */
#define ATA_SENSE_ILLEGAL_REQUEST       0x05    /* invalid command param(s) */
#define ATA_SENSE_UNIT_ATTENTION        0x06    /* media changed */
#define ATA_SENSE_DATA_PROTECT          0x07    /* write protect */
#define ATA_SENSE_BLANK_CHECK           0x08    /* blank check */
#define ATA_SENSE_VENDOR_SPECIFIC       0x09    /* vendor specific skey */
#define ATA_SENSE_COPY_ABORTED          0x0a    /* copy aborted */
#define ATA_SENSE_ABORTED_COMMAND       0x0b    /* command aborted, try again */
#define ATA_SENSE_EQUAL                 0x0c    /* equal */
#define ATA_SENSE_VOLUME_OVERFLOW       0x0d    /* volume overflow */
#define ATA_SENSE_MISCOMPARE            0x0e    /* data dont match the medium */
#define ATA_SENSE_RESERVED              0x0f
#define ATA_SENSE_ILI                   0x20;
#define ATA_SENSE_EOM                   0x40;
#define ATA_SENSE_FILEMARK              0x80;

    u_int32_t   cmd_info;               /* cmd information */
    u_int8_t    sense_length;           /* additional sense len (n-7) */
    u_int32_t   cmd_specific_info;      /* additional cmd spec info */
    u_int8_t    asc;                    /* additional sense code */
    u_int8_t    ascq;                   /* additional sense code qual */
    u_int8_t    replaceable_unit_code;  /* replaceable unit code */
    u_int8_t    specific;               /* sense key specific */
#define ATA_SENSE_SPEC_VALID    0x80
#define ATA_SENSE_SPEC_MASK     0x7f

    u_int8_t    specific1;              /* sense key specific */
    u_int8_t    specific2;              /* sense key specific */
} __packed;

/*
 * SET FEATURES subcommands
 */

/*
 * SET FEATURES command
 * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A)
 * These values go in the LBA 3:0.
 */
#define ATA_SF_EPC_RESTORE      0x00    /* Restore Power Condition Settings */
#define ATA_SF_EPC_GOTO         0x01    /* Go To Power Condition */
#define ATA_SF_EPC_SET_TIMER    0x02    /* Set Power Condition Timer */
#define ATA_SF_EPC_SET_STATE    0x03    /* Set Power Condition State */
#define ATA_SF_EPC_ENABLE       0x04    /* Enable the EPC feature set */
#define ATA_SF_EPC_DISABLE      0x05    /* Disable the EPC feature set */
#define ATA_SF_EPC_SET_SOURCE   0x06    /* Set EPC Power Source */

/*
 * SET FEATURES command
 * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A)
 * Power Condition ID field
 * These values go in the count register.
 */
#define ATA_EPC_STANDBY_Z       0x00    /* Substate of PM2:Standby */
#define ATA_EPC_STANDBY_Y       0x01    /* Substate of PM2:Standby */
#define ATA_EPC_IDLE_A          0x81    /* Substate of PM1:Idle */
#define ATA_EPC_IDLE_B          0x82    /* Substate of PM1:Idle */
#define ATA_EPC_IDLE_C          0x83    /* Substate of PM1:Idle */
#define ATA_EPC_ALL             0xff    /* All supported power conditions */

/*
 * SET FEATURES command
 * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A)
 * Restore Power Conditions Settings subcommand
 * These values go in the LBA register.
 */
#define ATA_SF_EPC_RST_DFLT     0x40    /* 1=Rst from Default, 0= from Saved */
#define ATA_SF_EPC_RST_SAVE     0x10    /* 1=Save on completion */

/*
 * SET FEATURES command
 * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A)
 * Got To Power Condition subcommand
 * These values go in the LBA register.
 */
#define ATA_SF_EPC_GOTO_DELAY   0x02000000      /* Delayed entry bit */
#define ATA_SF_EPC_GOTO_HOLD    0x01000000      /* Hold Power Cond bit */

/*
 * SET FEATURES command
 * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A)
 * Set Power Condition Timer subcommand
 * These values go in the LBA register.
 */
#define ATA_SF_EPC_TIMER_MASK   0x00ffff00      /* Timer field */
#define ATA_SF_EPC_TIMER_SHIFT  8
#define ATA_SF_EPC_TIMER_SEC    0x00000080      /* Timer units, 1=sec, 0=.1s */
#define ATA_SF_EPC_TIMER_EN     0x00000020      /* Enable/disable cond. */
#define ATA_SF_EPC_TIMER_SAVE   0x00000010      /* Save settings on comp.  */

/*
 * SET FEATURES command
 * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A)
 * Set Power Condition State subcommand
 * These values go in the LBA register.
 */
#define ATA_SF_EPC_SETCON_EN    0x00000020      /* Enable power cond. */
#define ATA_SF_EPC_SETCON_SAVE  0x00000010      /* Save settings on comp */

/*
 * SET FEATURES command
 * Extended Power Conditions subcommand -- ATA_SF_EPC (0x4A)
 * Set EPC Power Source subcommand
 * These values go in the count register.
 */
#define ATA_SF_EPC_SRC_UNKNOWN  0x0000  /* Unknown source */
#define ATA_SF_EPC_SRC_BAT      0x0001  /* battery source */
#define ATA_SF_EPC_SRC_NOT_BAT  0x0002  /* not battery source */

#define ATA_LOG_DIRECTORY       0x00    /* Directory of all logs */
#define ATA_POWER_COND_LOG      0x08    /* Power Conditions Log */
#define ATA_PCL_IDLE            0x00    /* Idle Power Conditions Page */
#define ATA_PCL_STANDBY         0x01    /* Standby Power Conditions Page */
#define ATA_IDENTIFY_DATA_LOG   0x30    /* Identify Device Data Log */
#define ATA_IDL_PAGE_LIST       0x00    /* List of supported pages */
#define ATA_IDL_IDENTIFY_DATA   0x01    /* Copy of Identify Device data */
#define ATA_IDL_CAPACITY        0x02    /* Capacity */
#define ATA_IDL_SUP_CAP         0x03    /* Supported Capabilities */
#define ATA_IDL_CUR_SETTINGS    0x04    /* Current Settings */
#define ATA_IDL_ATA_STRINGS     0x05    /* ATA Strings */
#define ATA_IDL_SECURITY        0x06    /* Security */
#define ATA_IDL_PARALLEL_ATA    0x07    /* Parallel ATA */
#define ATA_IDL_SERIAL_ATA      0x08    /* Serial ATA */
#define ATA_IDL_ZDI             0x09    /* Zoned Device Information */

struct ata_gp_log_dir {
        uint8_t header[2];
#define ATA_GP_LOG_DIR_VERSION          0x0001
        uint8_t num_pages[255*2];       /* Number of log pages at address */
};

/*
 * ATA Power Conditions log descriptor
 */
struct ata_power_cond_log_desc {
        uint8_t reserved1;
        uint8_t flags;
#define ATA_PCL_COND_SUPPORTED          0x80
#define ATA_PCL_COND_SAVEABLE           0x40
#define ATA_PCL_COND_CHANGEABLE         0x20
#define ATA_PCL_DEFAULT_TIMER_EN        0x10
#define ATA_PCL_SAVED_TIMER_EN          0x08
#define ATA_PCL_CURRENT_TIMER_EN        0x04
#define ATA_PCL_HOLD_PC_NOT_SUP         0x02
        uint8_t reserved2[2];
        uint8_t default_timer[4];
        uint8_t saved_timer[4];
        uint8_t current_timer[4];
        uint8_t nom_time_to_active[4];
        uint8_t min_timer[4];
        uint8_t max_timer[4];
        uint8_t num_transitions_to_pc[4];
        uint8_t hours_in_pc[4];
        uint8_t reserved3[28];
};

/*
 * ATA Power Conditions Log (0x08), Idle power conditions page (0x00)
 */
struct ata_power_cond_log_idle {
        struct ata_power_cond_log_desc idle_a_desc;
        struct ata_power_cond_log_desc idle_b_desc;
        struct ata_power_cond_log_desc idle_c_desc;
        uint8_t reserved[320];
};

/*
 * ATA Power Conditions Log (0x08), Standby power conditions page (0x01)
 */
struct ata_power_cond_log_standby {
        uint8_t reserved[384];
        struct ata_power_cond_log_desc standby_y_desc;
        struct ata_power_cond_log_desc standby_z_desc;
};

/*
 * ATA IDENTIFY DEVICE data log (0x30) page 0x00
 * List of Supported IDENTIFY DEVICE data pages.
 */
struct ata_identify_log_pages {
        uint8_t header[8];
#define ATA_IDLOG_REVISION      0x0000000000000001
        uint8_t entry_count;
        uint8_t entries[503];
};

/*
 * ATA IDENTIFY DEVICE data log (0x30)
 * Capacity (Page 0x02).
 */
struct ata_identify_log_capacity {
        uint8_t header[8];
#define ATA_CAP_HEADER_VALID    0x8000000000000000
#define ATA_CAP_PAGE_NUM_MASK   0x0000000000ff0000
#define ATA_CAP_PAGE_NUM_SHIFT  16
#define ATA_CAP_REV_MASK        0x00000000000000ff
        uint8_t capacity[8];
#define ATA_CAP_CAPACITY_VALID  0x8000000000000000
#define ATA_CAP_ACCESSIBLE_CAP  0x0000ffffffffffff
        uint8_t phys_logical_sect_size[8];
#define ATA_CAP_PL_VALID        0x8000000000000000
#define ATA_CAP_LTOP_REL_SUP    0x4000000000000000
#define ATA_CAP_LOG_SECT_SUP    0x2000000000000000
#define ATA_CAP_ALIGN_ERR_MASK  0x0000000000300000
#define ATA_CAP_LTOP_MASK       0x00000000000f0000
#define ATA_CAP_LOG_SECT_OFF    0x000000000000ffff
        uint8_t logical_sect_size[8];
#define ATA_CAP_LOG_SECT_VALID  0x8000000000000000
#define ATA_CAP_LOG_SECT_SIZE   0x00000000ffffffff
        uint8_t nominal_buffer_size[8];
#define ATA_CAP_NOM_BUF_VALID   0x8000000000000000
#define ATA_CAP_NOM_BUF_SIZE    0x7fffffffffffffff
        uint8_t reserved[472];
};

/*
 * ATA IDENTIFY DEVICE data log (0x30)
 * Supported Capabilities (Page 0x03).
 */

struct ata_identify_log_sup_cap {
        uint8_t header[8];
#define ATA_SUP_CAP_HEADER_VALID        0x8000000000000000
#define ATA_SUP_CAP_PAGE_NUM_MASK       0x0000000000ff0000
#define ATA_SUP_CAP_PAGE_NUM_SHIFT      16
#define ATA_SUP_CAP_REV_MASK            0x00000000000000ff
        uint8_t sup_cap[8];
#define ATA_SUP_CAP_VALID               0x8000000000000000
#define ATA_SC_SET_SECT_CONFIG_SUP      0x0002000000000000 /* Set Sect Conf*/
#define ATA_SC_ZERO_EXT_SUP             0x0001000000000000 /* Zero EXT */
#define ATA_SC_SUCC_NCQ_SENSE_SUP       0x0000800000000000 /* Succ. NCQ Sns */
#define ATA_SC_DLC_SUP                  0x0000400000000000 /* DLC */
#define ATA_SC_RQSN_DEV_FAULT_SUP       0x0000200000000000 /* Req Sns Dev Flt*/
#define ATA_SC_DSN_SUP                  0x0000100000000000 /* DSN */
#define ATA_SC_LP_STANDBY_SUP           0x0000080000000000 /* LP Standby */
#define ATA_SC_SET_EPC_PS_SUP           0x0000040000000000 /* Set EPC PS */
#define ATA_SC_AMAX_ADDR_SUP            0x0000020000000000 /* AMAX Addr */
#define ATA_SC_DRAT_SUP                 0x0000008000000000 /* DRAT */
#define ATA_SC_LPS_MISALGN_SUP          0x0000004000000000 /* LPS Misalign */
#define ATA_SC_RB_DMA_SUP               0x0000001000000000 /* Read Buf DMA */
#define ATA_SC_WB_DMA_SUP               0x0000000800000000 /* Write Buf DMA */
#define ATA_SC_DNLD_MC_DMA_SUP          0x0000000200000000 /* DL MCode DMA */
#define ATA_SC_28BIT_SUP                0x0000000100000000 /* 28-bit */
#define ATA_SC_RZAT_SUP                 0x0000000080000000 /* RZAT */
#define ATA_SC_NOP_SUP                  0x0000000020000000 /* NOP */
#define ATA_SC_READ_BUFFER_SUP          0x0000000010000000 /* Read Buffer */
#define ATA_SC_WRITE_BUFFER_SUP         0x0000000008000000 /* Write Buffer */
#define ATA_SC_READ_LOOK_AHEAD_SUP      0x0000000002000000 /* Read Look-Ahead*/
#define ATA_SC_VOLATILE_WC_SUP          0x0000000001000000 /* Volatile WC */
#define ATA_SC_SMART_SUP                0x0000000000800000 /* SMART */
#define ATA_SC_FLUSH_CACHE_EXT_SUP      0x0000000000400000 /* Flush Cache Ext */
#define ATA_SC_48BIT_SUP                0x0000000000100000 /* 48-Bit */
#define ATA_SC_SPINUP_SUP               0x0000000000040000 /* Spin-Up */
#define ATA_SC_PUIS_SUP                 0x0000000000020000 /* PUIS */
#define ATA_SC_APM_SUP                  0x0000000000010000 /* APM */
#define ATA_SC_DL_MICROCODE_SUP         0x0000000000004000 /* DL Microcode */
#define ATA_SC_UNLOAD_SUP               0x0000000000002000 /* Unload */
#define ATA_SC_WRITE_FUA_EXT_SUP        0x0000000000001000 /* Write FUA EXT */
#define ATA_SC_GPL_SUP                  0x0000000000000800 /* GPL */
#define ATA_SC_STREAMING_SUP            0x0000000000000400 /* Streaming */
#define ATA_SC_SMART_SELFTEST_SUP       0x0000000000000100 /* SMART self-test */
#define ATA_SC_SMART_ERR_LOG_SUP        0x0000000000000080 /* SMART Err Log */
#define ATA_SC_EPC_SUP                  0x0000000000000040 /* EPC */
#define ATA_SC_SENSE_SUP                0x0000000000000020 /* Sense data */
#define ATA_SC_FREEFALL_SUP             0x0000000000000010 /* Free-Fall */
#define ATA_SC_DM_MODE3_SUP             0x0000000000000008 /* DM Mode 3 */
#define ATA_SC_GPL_DMA_SUP              0x0000000000000004 /* GPL DMA */
#define ATA_SC_WRITE_UNCOR_SUP          0x0000000000000002 /* Write uncorr.  */
#define ATA_SC_WRV_SUP                  0x0000000000000001 /* WRV */
        uint8_t download_code_cap[8];
#define ATA_DL_CODE_VALID               0x8000000000000000
#define ATA_DLC_DM_OFFSETS_DEFER_SUP    0x0000000400000000
#define ATA_DLC_DM_IMMED_SUP            0x0000000200000000
#define ATA_DLC_DM_OFF_IMMED_SUP        0x0000000100000000
#define ATA_DLC_DM_MAX_XFER_SIZE_MASK   0x00000000ffff0000
#define ATA_DLC_DM_MAX_XFER_SIZE_SHIFT  16
#define ATA_DLC_DM_MIN_XFER_SIZE_MASK   0x000000000000ffff
        uint8_t nom_media_rotation_rate[8];
#define ATA_NOM_MEDIA_ROTATION_VALID    0x8000000000000000
#define ATA_ROTATION_MASK               0x000000000000ffff
        uint8_t form_factor[8];
#define ATA_FORM_FACTOR_VALID           0x8000000000000000
#define ATA_FF_MASK                     0x000000000000000f
#define ATA_FF_NOT_REPORTED             0x0000000000000000 /* Not reported */
#define ATA_FF_525_IN                   0x0000000000000001 /* 5.25 inch */
#define ATA_FF_35_IN                    0x0000000000000002 /* 3.5 inch */
#define ATA_FF_25_IN                    0x0000000000000003 /* 2.5 inch */
#define ATA_FF_18_IN                    0x0000000000000004 /* 1.8 inch */
#define ATA_FF_LT_18_IN                 0x0000000000000005 /* < 1.8 inch */
#define ATA_FF_MSATA                    0x0000000000000006 /* mSATA */
#define ATA_FF_M2                       0x0000000000000007 /* M.2 */
#define ATA_FF_MICROSSD                 0x0000000000000008 /* MicroSSD */
#define ATA_FF_CFAST                    0x0000000000000009 /* CFast */
        uint8_t wrv_sec_cnt_mode3[8];
#define ATA_WRV_MODE3_VALID             0x8000000000000000
#define ATA_WRV_MODE3_COUNT             0x00000000ffffffff
        uint8_t wrv_sec_cnt_mode2[8];
#define ATA_WRV_MODE2_VALID             0x8000000000000000
#define ATA_WRV_MODE2_COUNT             0x00000000ffffffff
        uint8_t wwn[16];
        /* XXX KDM need to figure out how to handle 128-bit fields */
        uint8_t dsm[8];
#define ATA_DSM_VALID                   0x8000000000000000
#define ATA_LB_MARKUP_SUP               0x000000000000ff00
#define ATA_TRIM_SUP                    0x0000000000000001
        uint8_t util_per_unit_time[16];
        /* XXX KDM need to figure out how to handle 128-bit fields */
        uint8_t util_usage_rate_sup[8];
#define ATA_UTIL_USAGE_RATE_VALID       0x8000000000000000
#define ATA_SETTING_RATE_SUP            0x0000000000800000
#define ATA_SINCE_POWERON_SUP           0x0000000000000100
#define ATA_POH_RATE_SUP                0x0000000000000010
#define ATA_DATE_TIME_RATE_SUP          0x0000000000000001
        uint8_t zoned_cap[8];
#define ATA_ZONED_VALID                 0x8000000000000000
#define ATA_ZONED_MASK                  0x0000000000000003
        uint8_t sup_zac_cap[8];
#define ATA_SUP_ZAC_CAP_VALID           0x8000000000000000
#define ATA_ND_RWP_SUP                  0x0000000000000010 /* Reset Write Ptr*/
#define ATA_ND_FINISH_ZONE_SUP          0x0000000000000008 /* Finish Zone */
#define ATA_ND_CLOSE_ZONE_SUP           0x0000000000000004 /* Close Zone */
#define ATA_ND_OPEN_ZONE_SUP            0x0000000000000002 /* Open Zone */
#define ATA_REPORT_ZONES_SUP            0x0000000000000001 /* Report Zones */
        uint8_t reserved[392];
};

/*
 * ATA Identify Device Data Log Zoned Device Information Page (0x09).
 * Current as of ZAC r04a, August 25, 2015.
 */
struct ata_zoned_info_log {
        uint8_t header[8];
#define ATA_ZDI_HEADER_VALID    0x8000000000000000
#define ATA_ZDI_PAGE_NUM_MASK   0x0000000000ff0000
#define ATA_ZDI_PAGE_NUM_SHIFT  16
#define ATA_ZDI_REV_MASK        0x00000000000000ff
        uint8_t zoned_cap[8];
#define ATA_ZDI_CAP_VALID       0x8000000000000000
#define ATA_ZDI_CAP_URSWRZ      0x0000000000000001
        uint8_t zoned_settings[8];
#define ATA_ZDI_SETTINGS_VALID  0x8000000000000000
        uint8_t optimal_seq_zones[8];
#define ATA_ZDI_OPT_SEQ_VALID   0x8000000000000000
#define ATA_ZDI_OPT_SEQ_MASK    0x00000000ffffffff
        uint8_t optimal_nonseq_zones[8];
#define ATA_ZDI_OPT_NS_VALID    0x8000000000000000
#define ATA_ZDI_OPT_NS_MASK     0x00000000ffffffff
        uint8_t max_seq_req_zones[8];
#define ATA_ZDI_MAX_SEQ_VALID   0x8000000000000000
#define ATA_ZDI_MAX_SEQ_MASK    0x00000000ffffffff
        uint8_t version_info[8];
#define ATA_ZDI_VER_VALID       0x8000000000000000
#define ATA_ZDI_VER_ZAC_SUP     0x0100000000000000
#define ATA_ZDI_VER_ZAC_MASK    0x00000000000000ff
        uint8_t reserved[456];
};

struct ata_ioc_request {
    union {
        struct {
            u_int8_t            command;
            u_int8_t            feature;
            u_int64_t           lba;
            u_int16_t           count;
        } ata;
        struct {
            char                ccb[16];
            struct atapi_sense  sense;
        } atapi;
    } u;
    caddr_t             data;
    int                 count;
    int                 flags;
#define ATA_CMD_CONTROL                 0x01
#define ATA_CMD_READ                    0x02
#define ATA_CMD_WRITE                   0x04
#define ATA_CMD_ATAPI                   0x08

    int                 timeout;
    int                 error;
};

struct ata_security_password {
        u_int16_t               ctrl;
#define ATA_SECURITY_PASSWORD_USER      0x0000
#define ATA_SECURITY_PASSWORD_MASTER    0x0001
#define ATA_SECURITY_ERASE_NORMAL       0x0000
#define ATA_SECURITY_ERASE_ENHANCED     0x0002
#define ATA_SECURITY_LEVEL_HIGH         0x0000
#define ATA_SECURITY_LEVEL_MAXIMUM      0x0100

        u_int8_t                password[32];
        u_int16_t               revision;
        u_int16_t               reserved[238];
};

/* pr device ATA ioctl calls */
#define IOCATAREQUEST           _IOWR('a', 100, struct ata_ioc_request)
#define IOCATAGPARM             _IOR('a', 101, struct ata_params)
#define IOCATAGMODE             _IOR('a', 102, int)
#define IOCATASMODE             _IOW('a', 103, int)

#define IOCATAGSPINDOWN         _IOR('a', 104, int)
#define IOCATASSPINDOWN         _IOW('a', 105, int)

struct ata_ioc_raid_config {
            int                 lun;
            int                 type;
#define AR_JBOD                         0x0001
#define AR_SPAN                         0x0002
#define AR_RAID0                        0x0004
#define AR_RAID1                        0x0008
#define AR_RAID01                       0x0010
#define AR_RAID3                        0x0020
#define AR_RAID4                        0x0040
#define AR_RAID5                        0x0080

            int                 interleave;
            int                 status;
#define AR_READY                        1
#define AR_DEGRADED                     2
#define AR_REBUILDING                   4

            int                 progress;
            int                 total_disks;
            int                 disks[16];
};

struct ata_ioc_raid_status {
            int                 lun;
            int                 type;
            int                 interleave;
            int                 status;
            int                 progress;
            int                 total_disks;
            struct {
                    int         state;
#define AR_DISK_ONLINE                  0x01
#define AR_DISK_PRESENT                 0x02
#define AR_DISK_SPARE                   0x04
                    int         lun;
            } disks[16];
};

/* ATA RAID ioctl calls */
#define IOCATARAIDCREATE        _IOWR('a', 200, struct ata_ioc_raid_config)
#define IOCATARAIDDELETE        _IOW('a', 201, int)
#define IOCATARAIDSTATUS        _IOWR('a', 202, struct ata_ioc_raid_status)
#define IOCATARAIDADDSPARE      _IOW('a', 203, struct ata_ioc_raid_config)
#define IOCATARAIDREBUILD       _IOW('a', 204, int)

#endif /* _SYS_ATA_H_ */