bin/cp/utils.c

350

exit(EX_USAGE);

bin/df/df.c

497

exit(EX_USAGE);

bin/mkdir/mkdir.c

216

exit (EX_USAGE);

bin/mv/mv.c

453

exit(EX_USAGE);

bin/rm/rm.c

657

exit(EX_USAGE);

lib/libipfw3/basic/ipfw3_basic.c

247

errx(EX_USAGE, "protocol `%s' not recognizable\n", av);

lib/libutil/getmntopts.c

122

errx(EX_USAGE, "%s: not a directory", resolved);

lib/libutil/getmntopts.c

124

errx(EX_USAGE, "%s: %s", resolved, strerror(errno));

libexec/dma/dma-mbox-create.c

114

logfail(EX_USAGE, "no arguments");

libexec/dma/dma.c

470

errx(EX_USAGE, "invalid arguments");

libexec/dma/dma.c

555

exit(EX_USAGE);

libexec/dma/dma.c

563

errx(EX_USAGE, "sending mail and queue operations are mutually exclusive");

libexec/dma/dma.c

566

errx(EX_USAGE, "conflicting queue operations");

libexec/pppoed/pppoed.c

78

return EX_USAGE;

sbin/camcontrol/modeedit.c

816

errx(EX_USAGE, "cannot edit in binary mode.");

sbin/camcontrol/modeedit.c

847

errx(EX_USAGE, "it only makes sense to edit page 0 "

sbin/devattr/devattr.c

84

exit(EX_USAGE);

sbin/dumpon/dumpon.c

124

errx(EX_USAGE, "you need to run 'dumpoff' first.");

sbin/dumpon/dumpon.c

155

exit(EX_USAGE);

sbin/dumpon/dumpon.c

91

errx(EX_USAGE,

sbin/ip6fw/ip6fw.c

1282

errx(EX_USAGE, "-D requires -p");

sbin/ip6fw/ip6fw.c

1284

errx(EX_USAGE,

sbin/ip6fw/ip6fw.c

1292

errx(EX_USAGE, "-U requires -p");

sbin/ip6fw/ip6fw.c

1294

errx(EX_USAGE,

sbin/ip6fw/ip6fw.c

1378

errx(EX_USAGE, "%s: too many arguments", linename);

sbin/ipfw/ipfw2.c

1508

errx(EX_USAGE, "set needs command");

sbin/ipfw/ipfw2.c

1535

errx(EX_USAGE, "set swap needs 2 set numbers\n");

sbin/ipfw/ipfw2.c

1553

errx(EX_USAGE, "syntax: set move [rule] X to Y\n");

sbin/ipfw/ipfw2.c

1595

errx(EX_USAGE, "invalid set command %s\n", *av);

sbin/ipfw/ipfw2.c

1725

exitval = EX_USAGE;

sbin/ipfw/ipfw2.c

1785

exit(EX_USAGE);

sbin/ipfw/ipfw2.c

2152

#define NEED1(msg) {if (!ac) errx(EX_USAGE, msg);}

sbin/ipfw/ipfw2.c

2265

errx(EX_USAGE, "mask: value missing");

sbin/ipfw/ipfw2.c

2880

errx(EX_USAGE, "nested \"(\" not allowed\n"); \

sbin/ipfw/ipfw2.c

2900

errx(EX_USAGE, "missing \")\"\n"); \

sbin/ipfw/ipfw2.c

2906

errx(EX_USAGE, "double \"not\" not allowed\n"); \

sbin/ipfw/ipfw2.c

2971

errx(EX_USAGE, "missing ``from''");

sbin/ipfw/ipfw2.c

3006

errx(EX_USAGE, "missing ``to''");

sbin/ipfw/ipfw2.c

3057

errx(EX_USAGE, "double \"not\" not allowed\n");

sbin/ipfw/ipfw2.c

3066

errx(EX_USAGE, "double \"not\" not allowed\n");

sbin/ipfw/ipfw2.c

3072

errx(EX_USAGE, "invalid \"or\" block\n");

sbin/ipfw/ipfw2.c

3078

errx(EX_USAGE, "+nested \"(\" not allowed\n");

sbin/ipfw/ipfw2.c

3084

errx(EX_USAGE, "+missing \")\"\n");

sbin/ipfw/ipfw2.c

3259

errx(EX_USAGE, "rdr cannot be part "

sbin/ipfw/ipfw2.c

3262

errx(EX_USAGE, "only one of rdr, keep-state "

sbin/ipfw/ipfw2.c

3273

errx(EX_USAGE, "keep-state cannot be part "

sbin/ipfw/ipfw2.c

3276

errx(EX_USAGE, "only one of rdr, keep-state "

sbin/ipfw/ipfw2.c

3285

errx(EX_USAGE, "limit cannot be part "

sbin/ipfw/ipfw2.c

3288

errx(EX_USAGE, "only one of rdr, keep-state "

sbin/ipfw/ipfw2.c

3311

errx(EX_USAGE, "limit: limit must be >0");

sbin/ipfw/ipfw2.c

3313

errx(EX_USAGE, "missing limit mask");

sbin/ipfw/ipfw2.c

3364

errx(EX_USAGE, "MAC dst-mac src-mac");

sbin/ipfw/ipfw2.c

3378

errx(EX_USAGE, "unrecognised option [%d] %s\n", i, s1);

sbin/ipfw/ipfw2.c

3441

errx(EX_USAGE, "missing \'dst-port\' or \'recv\'");

sbin/ipfw/ipfw2.c

3506

errx(EX_USAGE, "invalid rule number ``%s''", *av);

sbin/ipfw/ipfw2.c

4104

errx(EX_USAGE, "bad command `%s'", *av);

sbin/ipfw/ipfw2.c

4132

errx(EX_USAGE, "bad command `%s'", *av);

sbin/ipfw/ipfw2.c

4154

errx(EX_USAGE, "-D requires -p");

sbin/ipfw/ipfw2.c

4156

errx(EX_USAGE,

sbin/ipfw/ipfw2.c

4164

errx(EX_USAGE, "-U requires -p");

sbin/ipfw/ipfw2.c

4166

errx(EX_USAGE,

sbin/ipfw/ipfw2.c

4184

errx(EX_USAGE, "bad arguments, for usage"

sbin/ipfw/ipfw2.c

4191

errx(EX_USAGE, "extraneous filename arguments");

sbin/ipfw/ipfw2.c

4252

errx(EX_USAGE, "%s: too many arguments",

sbin/ipfw3/ipfw3.c

1057

errx(EX_USAGE, "bad ipfw3 module command `%s'", *av);

sbin/ipfw3/ipfw3.c

1084

errx(EX_USAGE, "bad ipfw3 command `%s'", *av);

sbin/ipfw3/ipfw3.c

1104

errx(EX_USAGE, "-D requires -p");

sbin/ipfw3/ipfw3.c

1106

errx(EX_USAGE, "too many -D or -U options");

sbin/ipfw3/ipfw3.c

1113

errx(EX_USAGE, "-U requires -p");

sbin/ipfw3/ipfw3.c

1115

errx(EX_USAGE, "too many -D or -U options");

sbin/ipfw3/ipfw3.c

1132

errx(EX_USAGE, "bad arguments, for usage"

sbin/ipfw3/ipfw3.c

1140

errx(EX_USAGE, "extraneous filename arguments");

sbin/ipfw3/ipfw3.c

117

errx(EX_USAGE, "ipfw3 not loaded.");

sbin/ipfw3/ipfw3.c

1204

errx(EX_USAGE, "%s: too many arguments", linename);

sbin/ipfw3/ipfw3.c

185

errx(EX_USAGE, "keyword `%s' exists", word);

sbin/ipfw3/ipfw3.c

208

errx(EX_USAGE, "func `%d' of module `%d' exists",

sbin/ipfw3/ipfw3.c

313

exit(EX_USAGE);

sbin/ipfw3/ipfw3.c

502

errx(EX_USAGE, "'or' should"

sbin/ipfw3/ipfw3.c

510

errx(EX_USAGE, "double \"not\" not allowed\n");

sbin/ipfw3/ipfw3.c

534

errx(EX_USAGE, "bad command `%s'", cur);

sbin/ipfw3/ipfw3.c

548

errx(EX_USAGE, "bad command `%s'", *av);

sbin/ipfw3/ipfw3.c

637

errx(EX_USAGE, "invalid rule number ``%s''", *av);

sbin/ipfw3/ipfw3.c

667

errx(EX_USAGE, "pipe/queue in use");

sbin/ipfw3/ipfw3.c

669

errx(EX_USAGE, "do_set_x(IP_FW_FLUSH) failed");

sbin/ipfw3/ipfw3dummynet.c

267

errx(EX_USAGE, "mask: value missing");

sbin/ipfw3/ipfw3dummynet.c

706

errx(EX_USAGE, "pipe/queue in use");

sbin/ipfw3/ipfw3dummynet.c

708

errx(EX_USAGE, "do_set_x(IP_FW_FLUSH) failed");

sbin/ipfw3/ipfw3dummynet.c

725

errx(EX_USAGE, "bad ipfw pipe command `%s'", *av);

sbin/ipfw3/ipfw3log.c

135

errx(EX_USAGE, "bad command `%s'", *av);

sbin/ipfw3/ipfw3nat.c

206

errx(EX_USAGE, "NAT %d in use or not exists", i);

sbin/ipfw3/ipfw3nat.c

285

errx(EX_USAGE, "NAT configuration in use");

sbin/ipfw3/ipfw3nat.c

311

errx(EX_USAGE, "bad nat show command `%s'", *av);

sbin/ipfw3/ipfw3nat.c

316

errx(EX_USAGE, "bad ipfw nat command `%s'", *av);

sbin/ipfw3/ipfw3set.c

133

errx(EX_USAGE, "set swap needs 2 set numbers");

sbin/ipfw3/ipfw3set.c

161

errx(EX_USAGE, "move rule needs 2 numbers");

sbin/ipfw3/ipfw3set.c

189

errx(EX_USAGE, "move set needs 2 set numbers");

sbin/ipfw3/ipfw3set.c

223

errx(EX_USAGE, "invalid set %s", *av);

sbin/ipfw3/ipfw3set.c

241

errx(EX_USAGE, "set needs command");

sbin/ipfw3/ipfw3set.c

253

errx(EX_USAGE, "invalid move command %s", *av);

sbin/ipfw3/ipfw3set.c

261

errx(EX_USAGE, "invalid set command %s", *av);

sbin/ipfw3/ipfw3set.c

95

errx(EX_USAGE, "invalid set %s", *av);

sbin/ipfw3/ipfw3state.c

201

errx(EX_USAGE, "bad ipfw3 state command `%s'", *av);

sbin/ipfw3/ipfw3sync.c

102

errx(EX_USAGE, "invalid edge port `%s'", *av);

sbin/ipfw3/ipfw3sync.c

132

errx(EX_USAGE, "edge `%s:%s' invalid",

sbin/ipfw3/ipfw3sync.c

314

errx(EX_USAGE, "bad show command `%s'", *av);

sbin/ipfw3/ipfw3sync.c

345

errx(EX_USAGE, "bad ipfw sync command `%s'", *av);

sbin/ipfw3/ipfw3sync.c

89

errx(EX_USAGE, "invalid edge port `%s'", *av);

sbin/ipfw3/ipfw3table.c

106

errx(EX_USAGE, "table id `%s' invalid", *av);

sbin/ipfw3/ipfw3table.c

109

errx(EX_USAGE, "table id `%d' invalid", tbl.id);

sbin/ipfw3/ipfw3table.c

117

errx(EX_USAGE, "table type `%s' not supported", *av);

sbin/ipfw3/ipfw3table.c

123

errx(EX_USAGE, "IP address required");

sbin/ipfw3/ipfw3table.c

143

errx(EX_USAGE, "MAC address required");

sbin/ipfw3/ipfw3table.c

150

errx(EX_USAGE, "do_set_x(IP_FW_TABLE_APPEND) "

sbin/ipfw3/ipfw3table.c

166

errx(EX_USAGE, "table id `%s' invalid", *av);

sbin/ipfw3/ipfw3table.c

169

errx(EX_USAGE, "table id `%d' invalid", tbl.id);

sbin/ipfw3/ipfw3table.c

177

errx(EX_USAGE, "table type `%s' not supported", *av);

sbin/ipfw3/ipfw3table.c

181

errx(EX_USAGE, "IP address required");

sbin/ipfw3/ipfw3table.c

198

errx(EX_USAGE, "do_set_x(IP_FW_TABLE_REMOVE) "

sbin/ipfw3/ipfw3table.c

213

errx(EX_USAGE, "table id `%d' invalid", t->id);

sbin/ipfw3/ipfw3table.c

215

errx(EX_USAGE, "table id `%s' invalid", *av);

sbin/ipfw3/ipfw3table.c

218

errx(EX_USAGE, "do_set_x(IP_FW_TABLE_FLUSH) "

sbin/ipfw3/ipfw3table.c

256

errx(EX_USAGE, "ipfw3 table `%s' delete invalid", *av);

sbin/ipfw3/ipfw3table.c

265

errx(EX_USAGE, "table %d is not in use", tbl->id);

sbin/ipfw3/ipfw3table.c

321

errx(EX_USAGE, "table id `%d' invalid", *head);

sbin/ipfw3/ipfw3table.c

329

errx(EX_USAGE, "ipfw3 table `%s' show invalid", *av);

sbin/ipfw3/ipfw3table.c

341

errx(EX_USAGE, "table parameters invalid");

sbin/ipfw3/ipfw3table.c

345

errx(EX_USAGE, "table id `%d' invalid", t->id);

sbin/ipfw3/ipfw3table.c

347

errx(EX_USAGE, "table id `%s' invalid", *av);

sbin/ipfw3/ipfw3table.c

355

errx(EX_USAGE, "table type `%s' not supported", *av);

sbin/ipfw3/ipfw3table.c

364

errx(EX_USAGE, "table name `%s' too long", *av);

sbin/ipfw3/ipfw3table.c

367

errx(EX_USAGE, "table `%s' invalid", *av);

sbin/ipfw3/ipfw3table.c

371

errx(EX_USAGE, "do_set_x(IP_FW_TABLE_CREATE) "

sbin/ipfw3/ipfw3table.c

385

errx(EX_USAGE, "table id `%d' invalid", t->id);

sbin/ipfw3/ipfw3table.c

387

errx(EX_USAGE, "table id `%s' invalid", *av);

sbin/ipfw3/ipfw3table.c

390

errx(EX_USAGE, "table id `%d' invalid", t->id);

sbin/ipfw3/ipfw3table.c

393

errx(EX_USAGE, "do_set_x(IP_FW_TABLE_DELETE) "

sbin/ipfw3/ipfw3table.c

407

errx(EX_USAGE, "table id `%s' invalid", *av);

sbin/ipfw3/ipfw3table.c

410

errx(EX_USAGE, "table id `%d' invalid", tbl.id);

sbin/ipfw3/ipfw3table.c

418

errx(EX_USAGE, "table type `%s' not supported", *av);

sbin/ipfw3/ipfw3table.c

431

errx(EX_USAGE, "MAC address required");

sbin/ipfw3/ipfw3table.c

455

errx(EX_USAGE, "table id `%s' invalid", *av);

sbin/ipfw3/ipfw3table.c

458

errx(EX_USAGE, "table id `%d' invalid", tbl.id);

sbin/ipfw3/ipfw3table.c

464

errx(EX_USAGE, "do_set_x(IP_FW_TABLE_RENAME) "

sbin/ipfw3/ipfw3table.c

492

errx(EX_USAGE, "bad ipfw table command `%s'", *av);

sbin/md5/md5.c

315

errx(EX_USAGE, "`%s' is not a valid offset.", arg);

sbin/md5/md5.c

381

usage(EX_USAGE);

sbin/mount_cd9660/mount_cd9660.c

236

exit(EX_USAGE);

sbin/mount_cd9660/mount_cd9660.c

330

errx(EX_USAGE, "invalid file/dir mask: %s", s);

sbin/mount_ext2fs/mount_ext2fs.c

120

exit(EX_USAGE);

sbin/mount_hpfs/mount_hpfs.c

206

errx(EX_USAGE, "invalid file mode: %s", s);

sbin/mount_hpfs/mount_hpfs.c

214

exit(EX_USAGE);

sbin/mount_msdos/mount_msdos.c

268

errx(EX_USAGE, "invalid file mode: %s", s);

sbin/mount_msdos/mount_msdos.c

279

exit(EX_USAGE);

sbin/mount_ntfs/mount_ntfs.c

217

errx(EX_USAGE, "invalid file mode: %s", s);

sbin/mount_ntfs/mount_ntfs.c

225

exit(EX_USAGE);

sbin/mount_std/mount_std.c

119

exit(EX_USAGE);

sbin/mount_std/mount_std.c

74

errx(EX_USAGE, "argv[0] must end in _fsname");

sbin/mount_tmpfs/mount_tmpfs.c

303

errx(EX_USAGE, "invalid file mode: %s", s);

sbin/mount_tmpfs/mount_tmpfs.c

313

errx(EX_USAGE, "bad number for option: %s", s);

sbin/mount_udf/mount_udf.c

132

exit(EX_USAGE);

sbin/natacontrol/natacontrol.c

135

exit(EX_USAGE);

sbin/natacontrol/natacontrol.c

346

exit(EX_USAGE);

sbin/natacontrol/natacontrol.c

361

exit(EX_USAGE);

sbin/natacontrol/natacontrol.c

373

exit(EX_USAGE);

sbin/natacontrol/natacontrol.c

543

exit(EX_USAGE);

sbin/natacontrol/natacontrol.c

554

exit(EX_USAGE);

sbin/natacontrol/natacontrol.c

566

exit(EX_USAGE);

sbin/natacontrol/natacontrol.c

575

exit(EX_USAGE);

sbin/ping/ping.c

1584

errx(EX_USAGE,

sbin/ping/ping.c

1619

exit(EX_USAGE);

sbin/ping/ping.c

250

errx(EX_USAGE,

sbin/ping/ping.c

273

errx(EX_USAGE, "invalid packet size: `%s'",

sbin/ping/ping.c

287

errx(EX_USAGE, "invalid packet size: `%s'",

sbin/ping/ping.c

301

errx(EX_USAGE, "invalid increment size: `%s'",

sbin/ping/ping.c

314

errx(EX_USAGE,

sbin/ping/ping.c

323

errx(EX_USAGE, "invalid timing interval: `%s'",

sbin/ping/ping.c

339

errx(EX_USAGE,

sbin/ping/ping.c

358

errx(EX_USAGE, "invalid message: `%c'", optarg[0]);

sbin/ping/ping.c

365

errx(EX_USAGE, "invalid TTL: `%s'", optarg);

sbin/ping/ping.c

397

errx(EX_USAGE, "invalid packet size: `%s'",

sbin/ping/ping.c

400

errx(EX_USAGE,

sbin/ping/ping.c

408

errx(EX_USAGE, "invalid multicast TTL: `%s'",

sbin/ping/ping.c

416

errx(EX_USAGE, "invalid timeout: `%s'",

sbin/ping/ping.c

419

errx(EX_USAGE, "invalid timeout: `%s' > %d",

sbin/ping/ping.c

430

errx(EX_USAGE, "invalid wait timeout: `%s'",

sbin/ping/ping.c

439

errx(EX_USAGE, "invalid TOS: `%s'", optarg);

sbin/ping/ping.c

468

errx(EX_USAGE, "ICMP_TSTAMP and ICMP_MASKREQ are exclusive.");

sbin/ping/ping.c

476

errx(EX_USAGE, "packet size too large: %d > %d", datalen,

sbin/ping/ping.c

530

errx(EX_USAGE, "-f and -i: incompatible options");

sbin/ping/ping.c

533

errx(EX_USAGE,

sbin/ping/ping.c

537

errx(EX_USAGE,

sbin/ping/ping.c

631

errx(EX_USAGE, "Maximum packet size must be greater than the minimum packet size");

sbin/ping/ping.c

634

errx(EX_USAGE, "Packet size and ping sweep are mutually exclusive");

sbin/ping/ping.c

645

errx(EX_USAGE, "Maximum sweep size must be specified");

sbin/route/route.c

135

exit(EX_USAGE);

sbin/spppcontrol/spppcontrol.c

206

exit(EX_USAGE);

share/examples/find_interface/find_interface.c

67

errx(EX_USAGE, "must supply a hostname");

share/examples/libusb20/bulk.c

152

exit(EX_USAGE);

share/examples/libusb20/bulk.c

196

return (EX_USAGE);

share/examples/libusb20/control.c

186

exit(EX_USAGE);

share/examples/libusb20/control.c

367

return EX_USAGE;

share/examples/ppi/ppilcd.c

195

exit(EX_USAGE);

share/examples/ppi/ppilcd.c

344

errx(EX_USAGE, "hd44780: unknown option code '%c'", *(cp-1));

sys/net/ipfw3/ip_fw3.h

52

#define NEED1(msg) {if (ac < 1) errx(EX_USAGE, msg);}

sys/net/ipfw3/ip_fw3.h

53

#define NEED2(msg) {if (ac < 2) errx(EX_USAGE, msg);}

sys/net/ipfw3/ip_fw3.h

54

#define NEED(c, n, msg) {if (c < n) errx(EX_USAGE, msg);}

sys/platform/vkernel64/platform/init.c

1426

exit(EX_USAGE);

sys/platform/vkernel64/platform/init.c

1465

exit(EX_USAGE);

test/stress/stress2/lib/options.c

60

exit(EX_USAGE);

tools/tools/bus_autoconf/bus_autoconf.c

55

exit(EX_USAGE);

tools/tools/bus_autoconf/bus_autoconf.c

79

errx(EX_USAGE, "Invalid input "

tools/tools/bus_autoconf/bus_autoconf.c

97

errx(EX_USAGE, "Invalid section '%s'", section);

tools/tools/ifinfo/ifinfo.c

60

exit(EX_USAGE);

usr.bin/du/du.c

463

exit(EX_USAGE);

usr.bin/fmt/fmt.c

200

if (result<=0) { Lose: errx(EX_USAGE, "%s", err_mess); }

usr.bin/fmt/fmt.c

209

if (result<0) { Lose: errx(EX_USAGE, "%s", err_mess); }

usr.bin/fmt/fmt.c

274

err(EX_USAGE, "bad sentence-ending character set");

usr.bin/fmt/fmt.c

330

exit(ch=='h' ? 0 : EX_USAGE);

usr.bin/fmt/fmt.c

345

errx(EX_USAGE, "max length must be >= goal length");

usr.bin/fmt/fmt.c

350

if (max_length >= SIZE_T_MAX / sizeof (wchar_t)) errx(EX_USAGE, "max length too large");

usr.bin/fsync/fsync.c

69

exit(EX_USAGE);

usr.bin/getconf/getconf.c

118

errx(EX_USAGE,

usr.bin/getconf/getconf.c

130

errx(EX_USAGE,

usr.bin/getconf/getconf.c

53

exit(EX_USAGE);

usr.bin/getconf/getconf.c

80

errx(EX_USAGE, "invalid programming environment %s",

usr.bin/lockf/lockf.c

207

exit(EX_USAGE);

usr.bin/lockf/lockf.c

84

errx(EX_USAGE, "invalid timeout \"%s\"", optarg);

usr.bin/ncal/ncal.c

266

errx(EX_USAGE, "Double -A specified");

usr.bin/ncal/ncal.c

269

errx(EX_USAGE,

usr.bin/ncal/ncal.c

274

errx(EX_USAGE, "Double -A specified");

usr.bin/ncal/ncal.c

277

errx(EX_USAGE,

usr.bin/ncal/ncal.c

311

errx(EX_USAGE, "Double -m specified");

usr.bin/ncal/ncal.c

336

errx(EX_USAGE,

usr.bin/ncal/ncal.c

375

errx(EX_USAGE, "year `%s' not in range 1..9999", *argv);

usr.bin/ncal/ncal.c

399

errx(EX_USAGE,

usr.bin/ncal/ncal.c

427

errx(EX_USAGE, "-3 together with -A and -B is not supported.");

usr.bin/ncal/ncal.c

430

errx(EX_USAGE, "-3 together with -y is not supported.");

usr.bin/ncal/ncal.c

434

errx(EX_USAGE,

usr.bin/ncal/ncal.c

439

errx(EX_USAGE,

usr.bin/ncal/ncal.c

443

errx(EX_USAGE, "-y together with -m is not supported.");

usr.bin/ncal/ncal.c

446

errx(EX_USAGE, "-y together a given month is not supported.");

usr.bin/ncal/ncal.c

449

errx(EX_USAGE, "-y together a -A or -B is not supported.");

usr.bin/ncal/ncal.c

522

exit(EX_USAGE);

usr.bin/pwait/pwait.c

56

exit(EX_USAGE);

usr.bin/split/split.c

103

errx(EX_USAGE, "%s: illegal byte count",

usr.bin/split/split.c

111

errx(EX_USAGE, "%s: illegal regexp", optarg);

usr.bin/split/split.c

118

errx(EX_USAGE,

usr.bin/split/split.c

137

errx(EX_USAGE, "file name prefix is too long");

usr.bin/split/split.c

142

errx(EX_USAGE, "suffix is too long");

usr.bin/split/split.c

323

errx(EX_USAGE, "suffix is too long (max %ld)", i);

usr.bin/split/split.c

352

exit(EX_USAGE);

usr.bin/split/split.c

91

errx(EX_USAGE,

usr.bin/split/split.c

97

errx(EX_USAGE,

usr.bin/top/top.c

466

exit(EX_USAGE);

usr.bin/vmstat/vmstat.c

184

errx(EX_USAGE, "sorry, -f is not (re)implemented yet");

usr.bin/vmstat/vmstat.c

221

errx(EX_USAGE, "sorry, -t is not (re)implemented yet");

usr.bin/whereis/whereis.c

91

errx(EX_USAGE,

usr.bin/whois/whois.c

205

errx(EX_USAGE, "can't search for a null string");

usr.bin/whois/whois.c

344

exit(EX_USAGE);

usr.bin/xinstall/xinstall.c

1156

exit(EX_USAGE);

usr.bin/xinstall/xinstall.c

185

errx(EX_USAGE, "invalid file mode: %s",

usr.bin/xinstall/xinstall.c

268

errx(EX_USAGE, "%s: invalid flag", fflags);

usr.bin/xinstall/xinstall.c

289

err(EX_USAGE, "%s", to_name);

usr.bin/xinstall/xinstall.c

321

errx(EX_USAGE,

usr.sbin/acpi/acpiconf/acpiconf.c

221

errx(EX_USAGE, "invalid sleep type (%d)",

usr.sbin/acpi/acpiconf/acpiconf.c

92

err(EX_USAGE, "invalid battery %d", num);

usr.sbin/burncd/burncd.c

117

errx(EX_USAGE, "Invalid speed: %s", optarg);

usr.sbin/burncd/burncd.c

569

exit(EX_USAGE);

usr.sbin/chkgrp/chkgrp.c

49

exit(EX_USAGE);

usr.sbin/cpucontrol/cpucontrol.c

115

exit(EX_USAGE);

usr.sbin/inetd/inetd.c

365

exit(EX_USAGE);

usr.sbin/inetd/inetd.c

384

exit(EX_USAGE);

usr.sbin/inetd/inetd.c

389

exit(EX_USAGE);

usr.sbin/inetd/inetd.c

424

exit(EX_USAGE);

usr.sbin/lpr/lpd/lpd.c

187

errx(EX_USAGE, "lpd compiled sans INET6 (IPv6 support)");

usr.sbin/lpr/lpd/lpd.c

214

errx(EX_USAGE, "port # %d is invalid", i);

usr.sbin/lpr/lpd/lpd.c

931

exit(EX_USAGE);

usr.sbin/ngctl/main.c

168

rtn = EX_USAGE;

usr.sbin/ngctl/main.c

505

errx(EX_USAGE, "usage: ngctl [-d] [-f file] [-n name] [command ...]");

usr.sbin/nghook/main.c

219

errx(EX_USAGE, "usage: nghook [-da] path [hookname]");

usr.sbin/pw/pw.c

169

errx(EX_USAGE, "unknown keyword `%s'", argv[1]);

usr.sbin/pw/pw.c

188

errx(EX_USAGE, "unknown switch");

usr.sbin/pw/pw_group.c

77

errx(EX_USAGE, "'lock' command is not available for groups");

usr.sbin/sysvipcd/sysvipcd.c

330

exit(EX_USAGE);

usr.sbin/usbdump/usbdump.c

779

exit(EX_USAGE);

usr.sbin/watch/watch.c

194

exit(EX_USAGE);