root/sys/dev/usb/ubsavar.h
/*      $NetBSD: ubsavar.h,v 1.11 2019/05/09 02:43:35 mrg Exp $ */
/*-
 * Copyright (c) 2002, Alexander Kabaev <kan.FreeBSD.org>.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */
/*
 * Copyright (c) 2001 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Ichiro FUKUHARA (ichiro@ichiro.org).
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

#define UBSA_MODVER             1       /* module version */

#define UBSA_DEFAULT_CONFIG_INDEX       0
#define UBSA_IFACE_INDEX_OFFSET 0

#define UBSA_INTR_INTERVAL      100     /* ms */

#define UBSA_SET_BAUDRATE       0x00
#define UBSA_SET_STOP_BITS      0x01
#define UBSA_SET_DATA_BITS      0x02
#define UBSA_SET_PARITY         0x03
#define UBSA_SET_DTR            0x0A
#define UBSA_SET_RTS            0x0B
#define UBSA_SET_BREAK          0x0C
#define UBSA_SET_FLOW_CTRL      0x10

#define UBSA_QUADUMTS_SET_PIN   0x22

#define UBSA_PARITY_NONE        0x00
#define UBSA_PARITY_EVEN        0x01
#define UBSA_PARITY_ODD         0x02
#define UBSA_PARITY_MARK        0x03
#define UBSA_PARITY_SPACE       0x04

#define UBSA_FLOW_NONE          0x0000
#define UBSA_FLOW_OCTS          0x0001
#define UBSA_FLOW_ODSR          0x0002
#define UBSA_FLOW_IDSR          0x0004
#define UBSA_FLOW_IDTR          0x0008
#define UBSA_FLOW_IRTS          0x0010
#define UBSA_FLOW_ORTS          0x0020
#define UBSA_FLOW_UNKNOWN       0x0040
#define UBSA_FLOW_OXON          0x0080
#define UBSA_FLOW_IXON          0x0100

/* line status register */
#define UBSA_LSR_TSRE           0x40    /* Transmitter empty: byte sent */
#define UBSA_LSR_TXRDY          0x20    /* Transmitter buffer empty */
#define UBSA_LSR_BI             0x10    /* Break detected */
#define UBSA_LSR_FE             0x08    /* Framing error: bad stop bit */
#define UBSA_LSR_PE             0x04    /* Parity error */
#define UBSA_LSR_OE             0x02    /* Overrun, lost incoming byte */
#define UBSA_LSR_RXRDY          0x01    /* Byte ready in Receive Buffer */
#define UBSA_LSR_RCV_MASK       0x1f    /* Mask for incoming data or error */

/* modem status register */
/* All deltas are from the last read of the MSR. */
#define UBSA_MSR_DCD            0x80    /* Current Data Carrier Detect */
#define UBSA_MSR_RI             0x40    /* Current Ring Indicator */
#define UBSA_MSR_DSR            0x20    /* Current Data Set Ready */
#define UBSA_MSR_CTS            0x10    /* Current Clear to Send */
#define UBSA_MSR_DDCD           0x08    /* DCD has changed state */
#define UBSA_MSR_TERI           0x04    /* RI has toggled low to high */
#define UBSA_MSR_DDSR           0x02    /* DSR has changed state */
#define UBSA_MSR_DCTS           0x01    /* CTS has changed state */

#define UBSA_MAXCONN            3

struct  ubsa_softc {
        device_t                sc_dev;         /* base device */
        struct usbd_device *    sc_udev;        /* USB device */
        struct usbd_interface * sc_iface[UBSA_MAXCONN]; /* interface */

        int                     sc_iface_number[UBSA_MAXCONN];  /* interface number */
        int                     sc_config_index;        /* USB CONFIG_INDEX */

        int                     sc_intr_number; /* interrupt number */
        struct usbd_pipe *      sc_intr_pipe;   /* interrupt pipe */
        u_char                  *sc_intr_buf;   /* interrupt buffer */
        int                     sc_isize;

        u_char                  sc_dtr;         /* current DTR state */
        u_char                  sc_rts;         /* current RTS state */

        u_char                  sc_lsr;         /* Local status register */
        u_char                  sc_msr;         /* ubsa status register */

        device_t                sc_subdevs[UBSA_MAXCONN]; /* ucom device */
        int                     sc_numif;       /* number of interfaces */

        bool                    sc_dying;       /* disconnecting */
        u_char                  sc_quadumts;
        uint16_t                sc_devflags;
};


void ubsa_intr(struct usbd_xfer *, void *, usbd_status);

void ubsa_get_status(void *, int, u_char *, u_char *);
void ubsa_set(void *, int, int, int);
int  ubsa_param(void *, int, struct termios *);
int  ubsa_open(void *, int);
void ubsa_close(void *, int);
void ubsa_close_pipe(struct ubsa_softc *);

void ubsa_break(struct ubsa_softc *, int, int);
int  ubsa_request(struct ubsa_softc *, int, uint8_t, uint16_t);
void ubsa_dtr(struct ubsa_softc *, int, int);
void ubsa_quadumts_dtr(struct ubsa_softc *, int, int);
void ubsa_rts(struct ubsa_softc *, int, int);
void ubsa_quadumts_rts(struct ubsa_softc *, int, int);
void ubsa_baudrate(struct ubsa_softc *, int, speed_t);
void ubsa_parity(struct ubsa_softc *, int, tcflag_t);
void ubsa_databits(struct ubsa_softc *, int, tcflag_t);
void ubsa_stopbits(struct ubsa_softc *, int, tcflag_t);
void ubsa_flow(struct ubsa_softc *, int, tcflag_t, tcflag_t);