/*-
 * Copyright (c) 2012 The NetBSD Foundation, Inc.
 * All rights reserved.
 *
 * This code is derived from software contributed to The NetBSD Foundation
 * by Paul Fleischer <paul@xpg.dk>
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */
/* This file is based on arch/evbarm/smdk2xx0/smdk2410_machdep.c */
/*
 * Copyright (c) 2002, 2003 Fujitsu Component Limited
 * Copyright (c) 2002, 2003, 2005 Genetec Corporation
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. Neither the name of The Fujitsu Component Limited nor the name of
 *    Genetec corporation may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY FUJITSU COMPONENT LIMITED AND GENETEC
 * CORPORATION ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
 * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED.  IN NO EVENT SHALL FUJITSU COMPONENT LIMITED OR GENETEC
 * CORPORATION BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
 * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */
/*
 * Copyright (c) 2001,2002 ARM Ltd
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the company may not be used to endorse or promote
 *    products derived from this software without specific prior written
 *    permission.
 *
 * THIS SOFTWARE IS PROVIDED BY ARM LTD ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL ARM LTD
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 *
 */

/*
 * Copyright (c) 1997,1998 Mark Brinicombe.
 * Copyright (c) 1997,1998 Causality Limited.
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Mark Brinicombe
 *      for the NetBSD Project.
 * 4. The name of the company nor the name of the author may be used to
 *    endorse or promote products derived from this software without specific
 *    prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 *
 * Machine dependant functions for kernel setup for integrator board
 *
 * Created      : 24/11/97
 */

/*
 * Machine dependant functions for kernel setup for FriendlyARM MINI2440
 */

#include <sys/cdefs.h>
__KERNEL_RCSID(0, "$NetBSD: mini2440_machdep.c,v 1.23 2025/10/03 14:05:11 thorpej Exp $");

#include "opt_arm_debug.h"
#include "opt_console.h"
#include "opt_ddb.h"
#include "opt_kgdb.h"
#include "opt_md.h"

#include <sys/param.h>
#include <sys/device.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/exec.h>
#include <sys/proc.h>
#include <sys/msgbuf.h>
#include <sys/reboot.h>
#include <sys/termios.h>
#include <sys/ksyms.h>
#include <sys/mount.h>

#include <net/if.h>
#include <net/if_ether.h>
#include <net/if_media.h>

#include <uvm/uvm_extern.h>

#include <dev/cons.h>
#include <dev/md.h>

#include <machine/db_machdep.h>
#include <ddb/db_sym.h>
#include <ddb/db_extern.h>
#ifdef KGDB
#include <sys/kgdb.h>
#endif

#include <sys/exec_elf.h>

#include <sys/bus.h>
#include <machine/cpu.h>
#include <machine/frame.h>
#include <machine/intr.h>
#include <arm/undefined.h>

#include <machine/autoconf.h>

#include <arm/locore.h>
#include <arm/arm32/machdep.h>

#include <arm/s3c2xx0/s3c2440reg.h>
#include <arm/s3c2xx0/s3c2440var.h>

#include <arch/evbarm/mini2440/mini2440_bootinfo.h>

#include "ksyms.h"

#ifndef SDRAM_START
#define SDRAM_START     S3C2440_SDRAM_START
#endif
#ifndef SDRAM_SIZE
#define SDRAM_SIZE      (64*1024*1024) /* 64 Mb */
#endif

/*
 * Address to map I/O registers in early initialize stage.
 */
#define MINI2440_IO_VBASE       0xfd000000

/* Kernel text starts 2MB in from the bottom of the kernel address space. */
#define KERNEL_OFFSET           0x00200000
#define KERNEL_TEXT_BASE        (KERNEL_BASE + KERNEL_OFFSET)
#define KERNEL_VM_BASE          (KERNEL_BASE + 0x01000000)

/*
 * The range 0xc1000000 - 0xccffffff is available for kernel VM space
 * Core-logic registers and I/O mappings occupy 0xfd000000 - 0xffffffff
 */
#define KERNEL_VM_SIZE          0x0C000000

/* Declared extern elsewhere in the kernel */
BootConfig bootconfig;          /* Boot config storage */
char *boot_args = NULL;
//char *boot_file = NULL;

char bootinfo[BOOTINFO_MAXSIZE];
struct btinfo_rootdevice        *bi_rdev;
struct btinfo_net               *bi_net;
struct btinfo_bootpath          *bi_path;

vaddr_t physical_start;
vaddr_t physical_freestart;
vaddr_t physical_freeend;
vaddr_t physical_freeend_low;
vaddr_t physical_end;
u_int free_pages;
vaddr_t pagetables_start;

/*int debug_flags;*/
#ifndef PMAP_STATIC_L1S
int max_processes = 64;         /* Default number */
#endif                          /* !PMAP_STATIC_L1S */

paddr_t msgbufphys;

#define KERNEL_PT_SYS           0       /* L2 table for mapping zero page */
#define KERNEL_PT_KERNEL        1       /* L2 table for mapping kernel */
#define KERNEL_PT_KERNEL_NUM    3       /* L2 tables for mapping kernel VM */

#define KERNEL_PT_VMDATA        (KERNEL_PT_KERNEL + KERNEL_PT_KERNEL_NUM)

#define KERNEL_PT_VMDATA_NUM    4       /* start with 16MB of KVM */
#define NUM_KERNEL_PTS          (KERNEL_PT_VMDATA + KERNEL_PT_VMDATA_NUM)

pv_addr_t kernel_pt_table[NUM_KERNEL_PTS];

/* Prototypes */

void consinit(void);
void kgdb_port_init(void);
static void mini2440_ksyms(struct btinfo_symtab *bi_symtab);
static void *lookup_bootinfo(int type);
static void mini2440_device_register(device_t dev, void *aux);


#include "com.h"
#if NCOM > 0
#include <dev/ic/comreg.h>
#include <dev/ic/comvar.h>
#endif

#include "sscom.h"
#if NSSCOM > 0
#include "opt_sscom.h"
#include <arm/s3c2xx0/sscom_var.h>
#endif

/*
 * Define the default console speed for the board.  This is generally
 * what the firmware provided with the board defaults to.
 */
#ifndef CONSPEED
#define CONSPEED B115200        /* TTYDEF_SPEED */
#endif
#ifndef CONMODE
#define CONMODE ((TTYDEF_CFLAG & ~(CSIZE | CSTOPB | PARENB)) | CS8)   /* 8N1 */
#endif

int comcnspeed = CONSPEED;
int comcnmode = CONMODE;

/*
 * void cpu_reboot(int howto, char *bootstr)
 *
 * Reboots the system
 *
 * Deal with any syncing, unmounting, dumping and shutdown hooks,
 * then reset the CPU.
 */
void
cpu_reboot(int howto, char *bootstr)
{
#ifdef DIAGNOSTIC
        /* info */
        printf("boot: howto=%08x curproc=%p\n", howto, curproc);
#endif

        cpu_reset_address_paddr = vtophys((uintptr_t)s3c2440_softreset);

        /*
         * If we are still cold then hit the air brakes
         * and crash to earth fast
         */
        if (cold) {
                doshutdownhooks();
                printf("The operating system has halted.\n");
                printf("Please press any key to reboot.\n\n");
                cngetc();
                printf("rebooting...\n");
                cpu_reset();
                /* NOTREACHED */
        }
        /* Disable console buffering */

        /*
         * If RB_NOSYNC was not specified sync the discs.
         * Note: Unless cold is set to 1 here, syslogd will die during the
         * unmount.  It looks like syslogd is getting woken up only to find
         * that it cannot page part of the binary in as the filesystem has
         * been unmounted.
         */
        if (!(howto & RB_NOSYNC))
                bootsync();

        /* Say NO to interrupts */
        splhigh();

        /* Do a dump if requested. */
        if ((howto & (RB_DUMP | RB_HALT)) == RB_DUMP)
                dumpsys();

        /* Run any shutdown hooks */
        doshutdownhooks();

        /* Make sure IRQ's are disabled */
        IRQdisable;

        if (howto & RB_HALT) {
                printf("The operating system has halted.\n");
                printf("Please press any key to reboot.\n\n");
                cngetc();
        }
        printf("rebooting...\n");
        cpu_reset();
        /* NOTREACHED */
}

/*
 * Static device mappings. These peripheral registers are mapped at
 * fixed virtual addresses very early in initarm() so that we can use
 * them while booting the kernel , and stay at the same address
 * throughout whole kernel's life time.
 *
 * We use this table twice; once with bootstrap page table, and once
 * with kernel's page table which we build up in initarm().
 *
 * Since we map these registers into the bootstrap page table using
 * pmap_devmap_bootstrap() which calls pmap_map_chunk(), we map
 * registers segment-aligned and segment-rounded in order to avoid
 * using the 2nd page tables.
 */

#define _V(n)   (MINI2440_IO_VBASE + (n) * L1_S_SIZE)

#define GPIO_VBASE      _V(0)
#define INTCTL_VBASE    _V(1)
#define CLKMAN_VBASE    _V(2)
#define UART_VBASE      _V(3)

static const struct pmap_devmap mini2440_devmap[] = {
        /* GPIO registers */
        DEVMAP_ENTRY(
                GPIO_VBASE,
                S3C2440_GPIO_BASE,
                S3C2440_GPIO_SIZE
        ),
        DEVMAP_ENTRY(
                INTCTL_VBASE,
                S3C2440_INTCTL_BASE,
                S3C2440_INTCTL_SIZE
        ),
        DEVMAP_ENTRY(
                CLKMAN_VBASE,
                S3C2440_CLKMAN_BASE,
                S3C24X0_CLKMAN_SIZE
        ),
        /* UART registers for UART0, 1, 2. */
        DEVMAP_ENTRY(
                UART_VBASE,
                S3C2440_UART0_BASE,
                S3C2440_UART_BASE(3) - S3C2440_UART0_BASE
        ),
        DEVMAP_ENTRY_END
};

static inline   pd_entry_t *
read_ttb(void)
{
        long ttb;

        __asm volatile("mrc     p15, 0, %0, c2, c0, 0" : "=r"(ttb));


        return (pd_entry_t *)(ttb & ~((1 << 14) - 1));
}


#define ioreg_write32(a,v)      (*(volatile uint32_t *)(a)=(v))

/*
 * vaddr_t initarm(...)
 *
 * Initial entry point on startup. This gets called before main() is
 * entered.
 * It should be responsible for setting up everything that must be
 * in place when main is called.
 * This includes
 *   Taking a copy of the boot configuration structure.
 *   Initialising the physical console so characters can be printed.
 *   Setting up page tables for the kernel
 *   Relocating the kernel to the bottom of physical memory
 */

vaddr_t
initarm(void *arg)
{
        int loop;
        int loop1;
        u_int l1pagetable;
        extern int etext __asm("_etext");
        extern int end __asm("_end");
        uint32_t kerneldatasize;
        struct btinfo_magic *bi_magic = arg;
        struct btinfo_bootstring *bi_bootstring;
        struct btinfo_symtab *bi_symtab;

        boothowto = 0;

        /* Copy bootinfo from boot loader into kernel memory where it remains.
         */
        if (bi_magic != 0x0 && bi_magic->magic == BOOTINFO_MAGIC) {
                memcpy(bootinfo, bi_magic, sizeof(bootinfo));
        } else {
                memset(bootinfo, 0, sizeof(bootinfo));
        }

        /* Extract boot_args from bootinfo */
        bi_bootstring = lookup_bootinfo(BTINFO_BOOTSTRING);
        if (bi_bootstring ) {
                printf("Bootloader args are %s\n", bi_bootstring->bootstring);
                boot_args = bi_bootstring->bootstring;
                parse_mi_bootargs(boot_args);
        }

#define pdatb (*(volatile uint8_t *)(S3C2440_GPIO_BASE+GPIO_PBDAT))

// 0x1E0 is the mask for GPB5, GPB6, GPB7, and GPB8
#define __LED(x)  (pdatb = (pdatb & ~0x1e0) | (~(1<<(x+5)) & 0x1e0))

        __LED(0);

        /*
         * Heads up ... Setup the CPU / MMU / TLB functions
         */
        if (set_cpufuncs())
                panic("cpu not recognized!");

        /*
         * Map I/O registers that are used in startup.  Now we are
         * still using page table prepared by bootloader.  Later we'll
         * map those registers at the same address in the kernel page
         * table.
         */
        pmap_devmap_bootstrap((vaddr_t)read_ttb(), mini2440_devmap);

#undef  pdatb
#define pdatb (*(volatile uint8_t *)(GPIO_VBASE+GPIO_PBDAT))

        /* Disable all peripheral interrupts */
        ioreg_write32(INTCTL_VBASE + INTCTL_INTMSK, ~0);

        __LED(1);

        /* initialize some variables so that splfoo() doesn't
           touch illegal address.  */
        s3c2xx0_intr_bootstrap(INTCTL_VBASE);

        __LED(2);
        consinit();
        __LED(3);

        /* Extract information from the bootloader configuration */
        bi_rdev = lookup_bootinfo(BTINFO_ROOTDEVICE);
        bi_net = lookup_bootinfo(BTINFO_NET);
        bi_path = lookup_bootinfo(BTINFO_BOOTPATH);

#ifdef VERBOSE_INIT_ARM
        printf("consinit done\n");
#endif

#ifdef KGDB
        kgdb_port_init();
#endif

#ifdef VERBOSE_INIT_ARM
        /* Talk to the user */
        printf("\nNetBSD/evbarm (MINI2440) booting ...\n");
#endif
        /*
         * Ok we have the following memory map
         *
         * Physical Address Range     Description
         * -----------------------    ----------------------------------
         * 0x30000000 - 0x33ffffff    SDRAM (64MB)
         *
         * Kernel is loaded by bootloader at 0x30200000
         *
         * The initarm() has the responsibility for creating the kernel
         * page tables.
         * It must also set up various memory pointers that are used
         * by pmap etc.
         */

        /* Fake bootconfig structure for the benefit of pmap.c */
        /* XXX must make the memory description h/w independent */
        bootconfig.dramblocks = 1;
        bootconfig.dram[0].address = SDRAM_START;
        bootconfig.dram[0].pages = SDRAM_SIZE / PAGE_SIZE;

        /*
         * Set up the variables that define the availability of
         * physical memory.
         * We use the 2MB between the physical start and the kernel to
         * begin with. Allocating from 0x30200000 and downwards
         * If we get too close to the bottom of SDRAM, we
         * will panic.  We will update physical_freestart and
         * physical_freeend later to reflect what pmap_bootstrap()
         * wants to see.
         *
         * XXX pmap_bootstrap() needs an enema.
         */
        physical_start = bootconfig.dram[0].address;
        physical_end = physical_start + (bootconfig.dram[0].pages * PAGE_SIZE);

        physical_freestart = SDRAM_START;       /* XXX */
        physical_freeend = SDRAM_START + KERNEL_OFFSET;

        physmem = (physical_end - physical_start) / PAGE_SIZE;

#ifdef VERBOSE_INIT_ARM
        /* Tell the user about the memory */
        printf("physmemory: 0x%"PRIxPSIZE" pages at 0x%08lx -> 0x%08lx\n", physmem,
            physical_start, physical_end - 1);
        printf("phys_end: 0x%08lx\n", physical_end);
#endif

        /*
         * XXX
         * Okay, the kernel starts 2MB in from the bottom of physical
         * memory.  We are going to allocate our bootstrap pages downwards
         * from there.
         *
         * We need to allocate some fixed page tables to get the kernel
         * going.  We allocate one page directory and a number of page
         * tables and store the physical addresses in the kernel_pt_table
         * array.
         *
         * The kernel page directory must be on a 16K boundary.  The page
         * tables must be on 4K boundaries.  What we do is allocate the
         * page directory on the first 16K boundary that we encounter, and
         * the page tables on 4K boundaries otherwise.  Since we allocate
         * at least 3 L2 page tables, we are guaranteed to encounter at
         * least one 16K aligned region.
         */

#ifdef VERBOSE_INIT_ARM
        printf("Allocating page tables\n");
#endif

        free_pages = (physical_freeend - physical_freestart) / PAGE_SIZE;

#ifdef VERBOSE_INIT_ARM
        printf("freestart = 0x%08lx, free_pages = %d (0x%08x), freeend = 0x%08lx\n",
            physical_freestart, free_pages, free_pages, physical_freeend);
#endif

        /* Define a macro to simplify memory allocation */
#define valloc_pages(var, np)                           \
        alloc_pages((var).pv_pa, (np));                 \
        (var).pv_va = KERNEL_BASE + (var).pv_pa - physical_start;

#define alloc_pages(var, np)                            \
        physical_freeend -= ((np) * PAGE_SIZE);         \
        if (physical_freeend < physical_freestart)      \
                panic("initarm: out of memory");        \
        (var) = physical_freeend;                       \
        free_pages -= (np);                             \
        memset((char *)(var), 0, ((np) * PAGE_SIZE));

        loop1 = 0;
        for (loop = 0; loop <= NUM_KERNEL_PTS; ++loop) {
                /* Are we 16KB aligned for an L1 ? */
                if (((physical_freeend - L1_TABLE_SIZE) & (L1_TABLE_SIZE - 1)) == 0
                    && kernel_l1pt.pv_pa == 0) {
                        valloc_pages(kernel_l1pt, L1_TABLE_SIZE / PAGE_SIZE);
                } else {
                        valloc_pages(kernel_pt_table[loop1],
                            L2_TABLE_SIZE / PAGE_SIZE);
                        ++loop1;
                }
        }

        /* This should never be able to happen but better confirm that. */
        if (!kernel_l1pt.pv_pa || (kernel_l1pt.pv_pa & (L1_TABLE_SIZE - 1)) != 0)
                panic("initarm: Failed to align the kernel page directory\n");

        /*
         * Allocate a page for the system page mapped to V0x00000000
         * This page will just contain the system vectors and can be
         * shared by all processes.
         */
        alloc_pages(systempage.pv_pa, 1);

        /* Allocate stacks for all modes */
        valloc_pages(irqstack, IRQ_STACK_SIZE);
        valloc_pages(abtstack, ABT_STACK_SIZE);
        valloc_pages(undstack, UND_STACK_SIZE);
        valloc_pages(kernelstack, UPAGES);

#ifdef VERBOSE_INIT_ARM
        printf("IRQ stack: p0x%08lx v0x%08lx\n", irqstack.pv_pa,
            irqstack.pv_va);
        printf("ABT stack: p0x%08lx v0x%08lx\n", abtstack.pv_pa,
            abtstack.pv_va);
        printf("UND stack: p0x%08lx v0x%08lx\n", undstack.pv_pa,
            undstack.pv_va);
        printf("SVC stack: p0x%08lx v0x%08lx\n", kernelstack.pv_pa,
            kernelstack.pv_va);
        printf("Free memory in bootstrap region: %ld bytes\n", physical_freeend - physical_freestart);
#endif

        alloc_pages(msgbufphys, round_page(MSGBUFSIZE) / PAGE_SIZE);

        physical_freeend_low = physical_freeend;

        /*
         * Ok we have allocated physical pages for the primary kernel
         * page tables
         */

#ifdef VERBOSE_INIT_ARM
        printf("Creating L1 page table at 0x%08lx\n", kernel_l1pt.pv_pa);
#endif

        /*
         * Now we start construction of the L1 page table
         * We start by mapping the L2 page tables into the L1.
         * This means that we can replace L1 mappings later on if necessary
         */
        l1pagetable = kernel_l1pt.pv_pa;

        /* Map the L2 pages tables in the L1 page table */
        pmap_link_l2pt(l1pagetable, 0x00000000,
            &kernel_pt_table[KERNEL_PT_SYS]);
        for (loop = 0; loop < KERNEL_PT_KERNEL_NUM; loop++)
                pmap_link_l2pt(l1pagetable, KERNEL_BASE + loop * 0x00400000,
                    &kernel_pt_table[KERNEL_PT_KERNEL + loop]);
        for (loop = 0; loop < KERNEL_PT_VMDATA_NUM; loop++)
                pmap_link_l2pt(l1pagetable, KERNEL_VM_BASE + loop * 0x00400000,
                    &kernel_pt_table[KERNEL_PT_VMDATA + loop]);

        /* update the top of the kernel VM */
        pmap_curmaxkvaddr =
            KERNEL_VM_BASE + (KERNEL_PT_VMDATA_NUM * 0x00400000);

#ifdef VERBOSE_INIT_ARM
        printf("Mapping kernel\n");
#endif

        /* Now we fill in the L2 pagetable for the kernel static code/data */
        {
                /* Total size must include symbol table, if it exists.
                   The size of the symbol table can be acquired from the ELF
                   header, to which a pointer is passed in the boot info (ssym).
                 */
                size_t textsize = (uintptr_t)&etext - KERNEL_TEXT_BASE;
                kerneldatasize = (uintptr_t)&end - KERNEL_TEXT_BASE;
                u_int logical;

                bi_symtab = lookup_bootinfo(BTINFO_SYMTAB);

                if (bi_symtab) {
                        Elf_Ehdr *elfHeader;
                        Elf_Shdr *sectionHeader;
                        int nsection;
                        int sz = 0;

                        elfHeader = bi_symtab->ssym;

#ifdef VERBOSE_INIT_ARM
                        printf("Symbol table information provided by bootloader\n");
                        printf("ELF header is at %p\n", elfHeader);
#endif
                        sectionHeader = (Elf_Shdr*)((char*)(bi_symtab->ssym) +
                                                     (elfHeader->e_shoff));
                        nsection = elfHeader->e_shnum;
#ifdef VERBOSE_INIT_ARM
                        printf("Number of sections: %d\n", nsection);
#endif
                        for(; nsection > 0; nsection--, sectionHeader++) {
                                if (sectionHeader->sh_offset > 0 &&
                                    (sectionHeader->sh_offset + sectionHeader->sh_size) > sz)
                                        sz = sectionHeader->sh_offset + sectionHeader->sh_size;
                        }
#ifdef VERBOSE_INIT_ARM
                        printf("Max size of sections: %d\n", sz);
#endif
                        kerneldatasize += sz;
                }

#ifdef VERBOSE_INIT_ARM
                printf("Textsize: %u, kerneldatasize: %u\n", (uint)textsize,
                       (uint)kerneldatasize);
                printf("&etext: 0x%x\n", (uint)&etext);
                printf("&end: 0x%x\n", (uint)&end);
                printf("KERNEL_TEXT_BASE: 0x%x\n", KERNEL_TEXT_BASE);
#endif

                textsize = (textsize + PGOFSET) & ~PGOFSET;
                kerneldatasize = (kerneldatasize + PGOFSET) & ~PGOFSET;

                logical = KERNEL_OFFSET;        /* offset of kernel in RAM */

                logical += pmap_map_chunk(l1pagetable, KERNEL_BASE + logical,
                                          physical_start + logical, textsize,
                                          VM_PROT_READ | VM_PROT_WRITE, PTE_CACHE);
                logical += pmap_map_chunk(l1pagetable, KERNEL_BASE + logical,
                                          physical_start + logical, kerneldatasize - textsize,
                                          VM_PROT_READ | VM_PROT_WRITE, PTE_CACHE);
        }

#ifdef VERBOSE_INIT_ARM
        printf("Constructing L2 page tables\n");
#endif

        /* Map the stack pages */
        pmap_map_chunk(l1pagetable, irqstack.pv_va, irqstack.pv_pa,
            IRQ_STACK_SIZE * PAGE_SIZE, VM_PROT_READ | VM_PROT_WRITE,
            PTE_CACHE);
        pmap_map_chunk(l1pagetable, abtstack.pv_va, abtstack.pv_pa,
            ABT_STACK_SIZE * PAGE_SIZE, VM_PROT_READ | VM_PROT_WRITE,
            PTE_CACHE);
        pmap_map_chunk(l1pagetable, undstack.pv_va, undstack.pv_pa,
            UND_STACK_SIZE * PAGE_SIZE, VM_PROT_READ | VM_PROT_WRITE,
            PTE_CACHE);
        pmap_map_chunk(l1pagetable, kernelstack.pv_va, kernelstack.pv_pa,
            UPAGES * PAGE_SIZE, VM_PROT_READ | VM_PROT_WRITE, PTE_CACHE);

        pmap_map_chunk(l1pagetable, kernel_l1pt.pv_va, kernel_l1pt.pv_pa,
            L1_TABLE_SIZE, VM_PROT_READ | VM_PROT_WRITE, PTE_PAGETABLE);

        for (loop = 0; loop < NUM_KERNEL_PTS; ++loop) {
                pmap_map_chunk(l1pagetable, kernel_pt_table[loop].pv_va,
                    kernel_pt_table[loop].pv_pa, L2_TABLE_SIZE,
                    VM_PROT_READ|VM_PROT_WRITE, PTE_PAGETABLE);
        }

        /* Map the vector page. */
#if 0
        /* MULTI-ICE requires that page 0 is NC/NB so that it can download the
         * cache-clean code there.  */
        pmap_map_entry(l1pagetable, vector_page, systempage.pv_pa,
            VM_PROT_READ | VM_PROT_WRITE, PTE_NOCACHE);
#else
        pmap_map_entry(l1pagetable, vector_page, systempage.pv_pa,
            VM_PROT_READ | VM_PROT_WRITE, PTE_CACHE);
#endif

        /*
         * map integrated peripherals at same address in l1pagetable
         * so that we can continue to use console.
         */
        pmap_devmap_bootstrap(l1pagetable, mini2440_devmap);

        /*
         * Now we have the real page tables in place so we can switch to them.
         * Once this is done we will be running with the REAL kernel page
         * tables.
         */
        /*
         * Update the physical_freestart/physical_freeend/free_pages
         * variables.
         */
        physical_freestart = physical_start +
          (KERNEL_TEXT_BASE - KERNEL_BASE) + kerneldatasize;
        physical_freeend = physical_end;
        free_pages =
          (physical_freeend - physical_freestart) / PAGE_SIZE;

        /* Switch tables */
#ifdef VERBOSE_INIT_ARM
        printf("freestart = 0x%08lx, free_pages = %d (0x%x)\n",
            physical_freestart, free_pages, free_pages);
        printf("switching to new L1 page table  @%#lx...", kernel_l1pt.pv_pa);
#endif
        cpu_domains((DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2)) | DOMAIN_CLIENT);
        cpu_setttb(kernel_l1pt.pv_pa, true);
        cpu_tlb_flushID();
        cpu_domains(DOMAIN_CLIENT << (PMAP_DOMAIN_KERNEL*2));

        /*
         * Moved from cpu_startup() as data_abort_handler() references
         * this during uvm init
         */
        uvm_lwp_setuarea(&lwp0, kernelstack.pv_va);

#ifdef VERBOSE_INIT_ARM
        printf("done!\n");
#endif

#ifdef VERBOSE_INIT_ARM
        printf("bootstrap done.\n");
#endif

        arm32_vector_init(ARM_VECTORS_LOW, ARM_VEC_ALL);

        /*
         * Pages were allocated during the secondary bootstrap for the
         * stacks for different CPU modes.
         * We must now set the r13 registers in the different CPU modes to
         * point to these stacks.
         * Since the ARM stacks use STMFD etc. we must set r13 to the top end
         * of the stack memory.
         */
#ifdef VERBOSE_INIT_ARM
        printf("init subsystems: stacks ");
#endif

        set_stackptr(PSR_IRQ32_MODE,
            irqstack.pv_va + IRQ_STACK_SIZE * PAGE_SIZE);
        set_stackptr(PSR_ABT32_MODE,
            abtstack.pv_va + ABT_STACK_SIZE * PAGE_SIZE);
        set_stackptr(PSR_UND32_MODE,
            undstack.pv_va + UND_STACK_SIZE * PAGE_SIZE);

        cpu_idcache_wbinv_all();

        /*
         * Well we should set a data abort handler.
         * Once things get going this will change as we will need a proper
         * handler.
         * Until then we will use a handler that just panics but tells us
         * why.
         * Initialisation of the vectors will just panic on a data abort.
         * This just fills in a slightly better one.
         */
#ifdef VERBOSE_INIT_ARM
        printf("vectors ");
#endif
        data_abort_handler_address = (u_int)data_abort_handler;
        prefetch_abort_handler_address = (u_int)prefetch_abort_handler;
        undefined_handler_address = (u_int)undefinedinstruction_bounce;

        /* Initialise the undefined instruction handlers */
#ifdef VERBOSE_INIT_ARM
        printf("undefined ");
#endif
        undefined_init();

        /* Load memory into UVM. */
#ifdef VERBOSE_INIT_ARM
        printf("page ");
#endif
        uvm_md_init();
        uvm_page_physload(atop(physical_freestart), atop(physical_freeend),
            atop(physical_freestart), atop(physical_freeend),
            VM_FREELIST_DEFAULT);
        uvm_page_physload(atop(SDRAM_START), atop(physical_freeend_low),
            atop(SDRAM_START), atop(physical_freeend_low),
            VM_FREELIST_DEFAULT);


        /* Boot strap pmap telling it where managed kernel virtual memory is */
#ifdef VERBOSE_INIT_ARM
        printf("pmap ");
#endif
        pmap_bootstrap(KERNEL_VM_BASE, KERNEL_VM_BASE + KERNEL_VM_SIZE);

#ifdef VERBOSE_INIT_ARM
        printf("done.\n");
#endif

#ifdef BOOTHOWTO
        boothowto |= BOOTHOWTO;
#endif

#ifdef KGDB
        if (boothowto & RB_KDB) {
                kgdb_debug_init = 1;
                kgdb_connect(1);
        }
#endif

        mini2440_ksyms(bi_symtab);

#ifdef DDB
        /*db_machine_init();*/
        if (boothowto & RB_KDB)
                Debugger();
#endif

        evbarm_device_register = mini2440_device_register;

        /* We return the new stack pointer address */
        return kernelstack.pv_va + USPACE_SVC_STACK_TOP;
}

void
consinit(void)
{
        static int consinit_done = 0;
#if defined(SSCOM0CONSOLE) || defined(SSCOM1CONSOLE)
        bus_space_tag_t iot = &s3c2xx0_bs_tag;
#endif
        int pclk;

        if (consinit_done != 0)
                return;

        consinit_done = 1;

        s3c24x0_clock_freq2(CLKMAN_VBASE, NULL, NULL, &pclk);

#if NSSCOM > 0
#ifdef SSCOM0CONSOLE
        if (0 == s3c2440_sscom_cnattach(iot, 0, comcnspeed,
                pclk, comcnmode))
                return;
#endif
#ifdef SSCOM1CONSOLE
        if (0 == s3c2440_sscom_cnattach(iot, 1, comcnspeed,
                pclk, comcnmode))
                return;
#endif
#endif                          /* NSSCOM */
#if NCOM>0 && defined(CONCOMADDR)
        if (comcnattach(&isa_io_bs_tag, CONCOMADDR, comcnspeed,
                COM_FREQ, COM_TYPE_NORMAL, comcnmode))
                panic("can't init serial console @%x", CONCOMADDR);
        return;
#endif

        consinit_done = 0;
}


#ifdef KGDB

#if (NSSCOM > 0)

#ifdef KGDB_DEVNAME
const char kgdb_devname[] = KGDB_DEVNAME;
#else
const char kgdb_devname[] = "";
#endif

#ifndef KGDB_DEVMODE
#define KGDB_DEVMODE ((TTYDEF_CFLAG & ~(CSIZE|CSTOPB|PARENB))|CS8) /* 8N1 */
#endif
int kgdb_sscom_mode = KGDB_DEVMODE;

#endif                          /* NSSCOM */

void
kgdb_port_init(void)
{
#if (NSSCOM > 0)
        int unit = -1;
        int pclk;

        if (strcmp(kgdb_devname, "sscom0") == 0)
                unit = 0;
        else if (strcmp(kgdb_devname, "sscom1") == 0)
                unit = 1;

        if (unit >= 0) {
                s3c24x0_clock_freq2(CLKMAN_VBASE, NULL, NULL, &pclk);

                s3c2440_sscom_kgdb_attach(&s3c2xx0_bs_tag,
                    unit, kgdb_rate, pclk, kgdb_sscom_mode);
        }
#endif
}
#endif


static struct arm32_dma_range mini2440_dma_ranges[1];

bus_dma_tag_t
s3c2xx0_bus_dma_init(struct arm32_bus_dma_tag *dma_tag_template)
{
        extern paddr_t physical_start, physical_end;
        struct arm32_bus_dma_tag *dmat;

        mini2440_dma_ranges[0].dr_sysbase = physical_start;
        mini2440_dma_ranges[0].dr_busbase = physical_start;
        mini2440_dma_ranges[0].dr_len = physical_end - physical_start;

#if 1
        dmat = dma_tag_template;
#else
        dmat = malloc(sizeof *dmat, M_DEVBUF, M_WAITOK);
        *dmat =  *dma_tag_template;
#endif

        dmat->_ranges = mini2440_dma_ranges;
        dmat->_nranges = 1;

        return dmat;
}

void
mini2440_ksyms(struct btinfo_symtab *bi_symtab)
{
#if NKSYMS || defined(DDB) || defined(LKM)
        extern int end;

#ifdef DDB
        db_machine_init();
#endif
        if (bi_symtab == NULL) {
                return;
        }
#ifdef VERBOSE_INIT_ARM
        printf("Got symbol table. nsym=%d, ssym=%p, esym=%p\n",
               bi_symtab->nsym,
               bi_symtab->ssym,
               bi_symtab->esym);
#endif

        ksyms_addsyms_elf(bi_symtab->nsym,
                          (int*)bi_symtab->ssym,
                          (int*)bi_symtab->esym);
#endif
}

void *
lookup_bootinfo(int type)
{
        struct btinfo_common *bt;
        struct btinfo_common *help = (struct btinfo_common *)bootinfo;

        if (help->next == 0)
                return (NULL);  /* bootinfo[] was not made */
        do {
                bt = help;
                if (bt->type == type)
                        return (help);
                help = (struct btinfo_common *)((char*)help + bt->next);
        } while (bt->next &&
                 (size_t)help < (size_t)bootinfo + BOOTINFO_MAXSIZE);

        return (NULL);
}


extern char *booted_kernel;

static void
mini2440_device_register(device_t dev, void *aux) {
        if (device_class(dev) == DV_IFNET) {
#ifndef MEMORY_DISK_IS_ROOT
                if (bi_rdev != NULL && device_is_a(dev, bi_rdev->devname) ) {
                        booted_device = dev;
                        rootfstype = MOUNT_NFS;
                        if( bi_path != NULL ) {
                                booted_kernel = bi_path->bootpath;
                        }
                }
#endif
                if (bi_net != NULL && device_is_a(dev, bi_net->devname)) {
                        if (! device_setprop_data(dev, "mac-address",
                                                  bi_net->mac_address,
                                                  ETHER_ADDR_LEN)) {
                                printf("WARNING: Unable to set mac-address property for %s\n", device_xname(dev));
                        }
                        bi_net = NULL;
                }
        }
#ifndef MEMORY_DISK_IS_ROOT
        if (bi_rdev != NULL && device_class(dev) == DV_DISK
            && device_is_a(dev, bi_rdev->devname)
            && device_unit(dev) == bi_rdev->cookie) {
                booted_device = dev;
                booted_partition = bi_rdev->partition;
                rootfstype = ROOT_FSTYPE_ANY;
                if( bi_path != NULL ) {
                        booted_kernel = bi_path->bootpath;
                }
        }
#endif
}