root/sys/arch/next68k/stand/boot/dmareg.h
/*      $NetBSD: dmareg.h,v 1.4 2023/02/07 14:27:59 tsutsui Exp $       */
/*
 * Copyright (c) 1997 Rolf Grossmann
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Rolf Grossmann.
 * 4. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#define MAX_DMASIZE 4096

/* from nextdev/dma.h */

#if 0
#define DMA_BEGINALIGNMENT      4       /* initial buffer must be on long */
#else
#define DMA_BEGINALIGNMENT      16      /* initial buffer must be on long */
#endif

#define DMA_ENDALIGNMENT        16      /* DMA must end on quad longword */
#define ENDMA_ENDALIGNMENT      32      /* Ethernet DMA is very special */

#define DMA_ALIGN(type, addr)   \
        ((type)(((unsigned)(addr)+DMA_BEGINALIGNMENT-1) \
                &~(DMA_BEGINALIGNMENT-1)))

#define DMA_ENDALIGN(type, addr)        \
        ((type)(((unsigned)(addr)+DMA_ENDALIGNMENT-1) \
                &~(DMA_ENDALIGNMENT-1)))

#define ENDMA_ENDALIGN(type, addr)      \
        ((type)((((unsigned)(addr)+ENDMA_ENDALIGNMENT-1) \
                 &~(DMA_ENDALIGNMENT-1))|0x80000000))

struct dma_dev {                /* format of dma device registers */
        volatile uint32_t dd_csr; /* control & status register */
        char dd_pad[0x3fec];    /* csr not contiguous with next */
        char *dd_saved_next;    /* saved pointers for HW restart */
        char *dd_saved_limit;
        char *dd_saved_start;
        char *dd_saved_stop;
        char *dd_next;          /* next word to dma */
        char *dd_limit;         /* dma complete when next == limit */
        char *dd_start;         /* start of 2nd buf to dma */
        char *dd_stop;          /* end of 2nd buf to dma */
        char dd_pad2[0x1f0];
        char *dd_next_initbuf;  /* next register that inits dma buffering */
};

/*
 * bits in dd_csr
 */
/* read bits */
#define DMACSR_ENABLE           0x01000000      /* enable dma transfer */
#define DMACSR_SUPDATE          0x02000000      /* single update */
#define DMACSR_COMPLETE         0x08000000      /* current dma has completed */
#define DMACSR_BUSEXC           0x10000000      /* bus exception occurred */
/* write bits */
#define DMACSR_SETENABLE        0x00010000      /* set enable */
#define DMACSR_SETSUPDATE       0x00020000      /* set single update */
#define DMACSR_READ             0x00040000      /* dma from dev to mem */
#define DMACSR_WRITE            0x00000000      /* dma from mem to dev */
#define DMACSR_CLRCOMPLETE      0x00080000      /* clear complete conditional */
#define DMACSR_RESET            0x00100000      /* clr cmplt, sup, enable */
#define DMACSR_INITBUF          0x00200000      /* initialize DMA buffers */
#define DMACSR_INITBUFTURBO     0x00800000