// SPDX-License-Identifier: GPL-2.0-or-later
// Copyright IBM Corp
// Copyright ASPEED Technology

#define pr_fmt(fmt) "clk-ast2600: " fmt

#include <linux/mfd/syscon.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>

#include <dt-bindings/clock/ast2600-clock.h>

#include "clk-aspeed.h"

/*
 * This includes the gates (configured from aspeed_g6_gates), plus the
 * explicitly-configured clocks (ASPEED_CLK_HPLL and up).
 */
#define ASPEED_G6_NUM_CLKS              73

#define ASPEED_G6_SILICON_REV           0x014
#define CHIP_REVISION_ID                        GENMASK(23, 16)

#define ASPEED_G6_RESET_CTRL            0x040
#define ASPEED_G6_RESET_CTRL2           0x050

#define ASPEED_G6_CLK_STOP_CTRL         0x080
#define ASPEED_G6_CLK_STOP_CTRL2        0x090

#define ASPEED_G6_MISC_CTRL             0x0C0
#define  UART_DIV13_EN                  BIT(12)

#define ASPEED_G6_CLK_SELECTION1        0x300
#define ASPEED_G6_CLK_SELECTION2        0x304
#define ASPEED_G6_CLK_SELECTION4        0x310
#define ASPEED_G6_CLK_SELECTION5        0x314
#define   I3C_CLK_SELECTION_SHIFT       31
#define   I3C_CLK_SELECTION             BIT(31)
#define     I3C_CLK_SELECT_HCLK         (0 << I3C_CLK_SELECTION_SHIFT)
#define     I3C_CLK_SELECT_APLL_DIV     (1 << I3C_CLK_SELECTION_SHIFT)
#define   APLL_DIV_SELECTION_SHIFT      28
#define   APLL_DIV_SELECTION            GENMASK(30, 28)
#define     APLL_DIV_2                  (0b001 << APLL_DIV_SELECTION_SHIFT)
#define     APLL_DIV_3                  (0b010 << APLL_DIV_SELECTION_SHIFT)
#define     APLL_DIV_4                  (0b011 << APLL_DIV_SELECTION_SHIFT)
#define     APLL_DIV_5                  (0b100 << APLL_DIV_SELECTION_SHIFT)
#define     APLL_DIV_6                  (0b101 << APLL_DIV_SELECTION_SHIFT)
#define     APLL_DIV_7                  (0b110 << APLL_DIV_SELECTION_SHIFT)
#define     APLL_DIV_8                  (0b111 << APLL_DIV_SELECTION_SHIFT)

#define ASPEED_HPLL_PARAM               0x200
#define ASPEED_APLL_PARAM               0x210
#define ASPEED_MPLL_PARAM               0x220
#define ASPEED_EPLL_PARAM               0x240
#define ASPEED_DPLL_PARAM               0x260

#define ASPEED_G6_STRAP1                0x500

#define ASPEED_MAC12_CLK_DLY            0x340
#define ASPEED_MAC34_CLK_DLY            0x350

/* Globally visible clocks */
static DEFINE_SPINLOCK(aspeed_g6_clk_lock);

/* Keeps track of all clocks */
static struct clk_hw_onecell_data *aspeed_g6_clk_data;

static void __iomem *scu_g6_base;
/* AST2600 revision: A0, A1, A2, etc */
static u8 soc_rev;

/*
 * The majority of the clocks in the system are gates paired with a reset
 * controller that holds the IP in reset; this is represented by the @reset_idx
 * member of entries here.
 *
 * This borrows from clk_hw_register_gate, but registers two 'gates', one
 * to control the clock enable register and the other to control the reset
 * IP. This allows us to enforce the ordering:
 *
 * 1. Place IP in reset
 * 2. Enable clock
 * 3. Delay
 * 4. Release reset
 *
 * Consequently, if reset_idx is set, reset control is implicit: the clock
 * consumer does not need its own reset handling, as enabling the clock will
 * also deassert reset.
 *
 * There are some gates that do not have an associated reset; these are
 * handled by using -1 as the index for the reset, and the consumer must
 * explicitly assert/deassert reset lines as required.
 *
 * Clocks marked with CLK_IS_CRITICAL:
 *
 *  ref0 and ref1 are essential for the SoC to operate
 *  mpll is required if SDRAM is used
 */
static const struct aspeed_gate_data aspeed_g6_gates[] = {
        /*                                  clk rst  name               parent   flags */
        [ASPEED_CLK_GATE_MCLK]          = {  0, -1, "mclk-gate",        "mpll",  CLK_IS_CRITICAL }, /* SDRAM */
        [ASPEED_CLK_GATE_ECLK]          = {  1,  6, "eclk-gate",        "eclk",  0 },   /* Video Engine */
        [ASPEED_CLK_GATE_GCLK]          = {  2,  7, "gclk-gate",        NULL,    0 },   /* 2D engine */
        /* vclk parent - dclk/d1clk/hclk/mclk */
        [ASPEED_CLK_GATE_VCLK]          = {  3, -1, "vclk-gate",        NULL,    0 },   /* Video Capture */
        [ASPEED_CLK_GATE_BCLK]          = {  4,  8, "bclk-gate",        "bclk",  0 }, /* PCIe/PCI */
        /* From dpll */
        [ASPEED_CLK_GATE_DCLK]          = {  5, -1, "dclk-gate",        NULL,    CLK_IS_CRITICAL }, /* DAC */
        [ASPEED_CLK_GATE_REF0CLK]       = {  6, -1, "ref0clk-gate",     "clkin", CLK_IS_CRITICAL },
        [ASPEED_CLK_GATE_USBPORT2CLK]   = {  7,  3, "usb-port2-gate",   NULL,    0 },   /* USB2.0 Host port 2 */
        /* Reserved 8 */
        [ASPEED_CLK_GATE_USBUHCICLK]    = {  9, 15, "usb-uhci-gate",    NULL,    0 },   /* USB1.1 (requires port 2 enabled) */
        /* From dpll/epll/40mhz usb p1 phy/gpioc6/dp phy pll */
        [ASPEED_CLK_GATE_D1CLK]         = { 10, 13, "d1clk-gate",       "d1clk", 0 },   /* GFX CRT */
        /* Reserved 11/12 */
        [ASPEED_CLK_GATE_YCLK]          = { 13,  4, "yclk-gate",        NULL,    0 },   /* HAC */
        [ASPEED_CLK_GATE_USBPORT1CLK]   = { 14, 14, "usb-port1-gate",   NULL,    0 },   /* USB2 hub/USB2 host port 1/USB1.1 dev */
        [ASPEED_CLK_GATE_UART5CLK]      = { 15, -1, "uart5clk-gate",    "uart",  0 },   /* UART5 */
        /* Reserved 16/19 */
        [ASPEED_CLK_GATE_MAC1CLK]       = { 20, 11, "mac1clk-gate",     "mac12", 0 },   /* MAC1 */
        [ASPEED_CLK_GATE_MAC2CLK]       = { 21, 12, "mac2clk-gate",     "mac12", 0 },   /* MAC2 */
        /* Reserved 22/23 */
        [ASPEED_CLK_GATE_RSACLK]        = { 24,  4, "rsaclk-gate",      NULL,    0 },   /* HAC */
        [ASPEED_CLK_GATE_RVASCLK]       = { 25,  9, "rvasclk-gate",     NULL,    0 },   /* RVAS */
        /* Reserved 26 */
        [ASPEED_CLK_GATE_EMMCCLK]       = { 27, 16, "emmcclk-gate",     NULL,    0 },   /* For card clk */
        /* Reserved 28/29/30 */
        [ASPEED_CLK_GATE_LCLK]          = { 32, 32, "lclk-gate",        NULL,    0 }, /* LPC */
        [ASPEED_CLK_GATE_ESPICLK]       = { 33, -1, "espiclk-gate",     NULL,    0 }, /* eSPI */
        [ASPEED_CLK_GATE_REF1CLK]       = { 34, -1, "ref1clk-gate",     "clkin", CLK_IS_CRITICAL },
        /* Reserved 35 */
        [ASPEED_CLK_GATE_SDCLK]         = { 36, 56, "sdclk-gate",       NULL,    0 },   /* SDIO/SD */
        [ASPEED_CLK_GATE_LHCCLK]        = { 37, -1, "lhclk-gate",       "lhclk", 0 },   /* LPC master/LPC+ */
        /* Reserved 38 RSA: no longer used */
        /* Reserved 39 */
        [ASPEED_CLK_GATE_I3C0CLK]       = { 40,  40, "i3c0clk-gate",    "i3cclk", 0 }, /* I3C0 */
        [ASPEED_CLK_GATE_I3C1CLK]       = { 41,  41, "i3c1clk-gate",    "i3cclk", 0 }, /* I3C1 */
        [ASPEED_CLK_GATE_I3C2CLK]       = { 42,  42, "i3c2clk-gate",    "i3cclk", 0 }, /* I3C2 */
        [ASPEED_CLK_GATE_I3C3CLK]       = { 43,  43, "i3c3clk-gate",    "i3cclk", 0 }, /* I3C3 */
        [ASPEED_CLK_GATE_I3C4CLK]       = { 44,  44, "i3c4clk-gate",    "i3cclk", 0 }, /* I3C4 */
        [ASPEED_CLK_GATE_I3C5CLK]       = { 45,  45, "i3c5clk-gate",    "i3cclk", 0 }, /* I3C5 */
        /* Reserved: 46 & 47 */
        [ASPEED_CLK_GATE_UART1CLK]      = { 48,  -1, "uart1clk-gate",   "uart",  0 },   /* UART1 */
        [ASPEED_CLK_GATE_UART2CLK]      = { 49,  -1, "uart2clk-gate",   "uart",  0 },   /* UART2 */
        [ASPEED_CLK_GATE_UART3CLK]      = { 50,  -1, "uart3clk-gate",   "uart",  0 },   /* UART3 */
        [ASPEED_CLK_GATE_UART4CLK]      = { 51,  -1, "uart4clk-gate",   "uart",  0 },   /* UART4 */
        [ASPEED_CLK_GATE_MAC3CLK]       = { 52,  52, "mac3clk-gate",    "mac34", 0 },   /* MAC3 */
        [ASPEED_CLK_GATE_MAC4CLK]       = { 53,  53, "mac4clk-gate",    "mac34", 0 },   /* MAC4 */
        [ASPEED_CLK_GATE_UART6CLK]      = { 54,  -1, "uart6clk-gate",   "uartx", 0 },   /* UART6 */
        [ASPEED_CLK_GATE_UART7CLK]      = { 55,  -1, "uart7clk-gate",   "uartx", 0 },   /* UART7 */
        [ASPEED_CLK_GATE_UART8CLK]      = { 56,  -1, "uart8clk-gate",   "uartx", 0 },   /* UART8 */
        [ASPEED_CLK_GATE_UART9CLK]      = { 57,  -1, "uart9clk-gate",   "uartx", 0 },   /* UART9 */
        [ASPEED_CLK_GATE_UART10CLK]     = { 58,  -1, "uart10clk-gate",  "uartx", 0 },   /* UART10 */
        [ASPEED_CLK_GATE_UART11CLK]     = { 59,  -1, "uart11clk-gate",  "uartx", 0 },   /* UART11 */
        [ASPEED_CLK_GATE_UART12CLK]     = { 60,  -1, "uart12clk-gate",  "uartx", 0 },   /* UART12 */
        [ASPEED_CLK_GATE_UART13CLK]     = { 61,  -1, "uart13clk-gate",  "uartx", 0 },   /* UART13 */
        [ASPEED_CLK_GATE_FSICLK]        = { 62,  59, "fsiclk-gate",     "fsiclk", 0 },  /* FSI */
};

static const struct clk_div_table ast2600_eclk_div_table[] = {
        { 0x0, 2 },
        { 0x1, 2 },
        { 0x2, 3 },
        { 0x3, 4 },
        { 0x4, 5 },
        { 0x5, 6 },
        { 0x6, 7 },
        { 0x7, 8 },
        { 0 }
};

static const struct clk_div_table ast2600_emmc_extclk_div_table[] = {
        { 0x0, 2 },
        { 0x1, 4 },
        { 0x2, 6 },
        { 0x3, 8 },
        { 0x4, 10 },
        { 0x5, 12 },
        { 0x6, 14 },
        { 0x7, 16 },
        { 0 }
};

static const struct clk_div_table ast2600_mac_div_table[] = {
        { 0x0, 4 },
        { 0x1, 4 },
        { 0x2, 6 },
        { 0x3, 8 },
        { 0x4, 10 },
        { 0x5, 12 },
        { 0x6, 14 },
        { 0x7, 16 },
        { 0 }
};

static const struct clk_div_table ast2600_div_table[] = {
        { 0x0, 4 },
        { 0x1, 8 },
        { 0x2, 12 },
        { 0x3, 16 },
        { 0x4, 20 },
        { 0x5, 24 },
        { 0x6, 28 },
        { 0x7, 32 },
        { 0 }
};

/* For hpll/dpll/epll/mpll */
static struct clk_hw *ast2600_calc_pll(const char *name, u32 val)
{
        unsigned int mult, div;

        if (val & BIT(24)) {
                /* Pass through mode */
                mult = div = 1;
        } else {
                /* F = 25Mhz * [(M + 2) / (n + 1)] / (p + 1) */
                u32 m = val  & 0x1fff;
                u32 n = (val >> 13) & 0x3f;
                u32 p = (val >> 19) & 0xf;
                mult = (m + 1) / (n + 1);
                div = (p + 1);
        }
        return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
                        mult, div);
};

static struct clk_hw *ast2600_calc_apll(const char *name, u32 val)
{
        unsigned int mult, div;

        if (soc_rev >= 2) {
                if (val & BIT(24)) {
                        /* Pass through mode */
                        mult = div = 1;
                } else {
                        /* F = 25Mhz * [(m + 1) / (n + 1)] / (p + 1) */
                        u32 m = val & 0x1fff;
                        u32 n = (val >> 13) & 0x3f;
                        u32 p = (val >> 19) & 0xf;

                        mult = (m + 1);
                        div = (n + 1) * (p + 1);
                }
        } else {
                if (val & BIT(20)) {
                        /* Pass through mode */
                        mult = div = 1;
                } else {
                        /* F = 25Mhz * (2-od) * [(m + 2) / (n + 1)] */
                        u32 m = (val >> 5) & 0x3f;
                        u32 od = (val >> 4) & 0x1;
                        u32 n = val & 0xf;

                        mult = (2 - od) * (m + 2);
                        div = n + 1;
                }
        }
        return clk_hw_register_fixed_factor(NULL, name, "clkin", 0,
                        mult, div);
};

static u32 get_bit(u8 idx)
{
        return BIT(idx % 32);
}

static u32 get_reset_reg(struct aspeed_clk_gate *gate)
{
        if (gate->reset_idx < 32)
                return ASPEED_G6_RESET_CTRL;

        return ASPEED_G6_RESET_CTRL2;
}

static u32 get_clock_reg(struct aspeed_clk_gate *gate)
{
        if (gate->clock_idx < 32)
                return ASPEED_G6_CLK_STOP_CTRL;

        return ASPEED_G6_CLK_STOP_CTRL2;
}

static int aspeed_g6_clk_is_enabled(struct clk_hw *hw)
{
        struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
        u32 clk = get_bit(gate->clock_idx);
        u32 rst = get_bit(gate->reset_idx);
        u32 reg;
        u32 enval;

        /*
         * If the IP is in reset, treat the clock as not enabled,
         * this happens with some clocks such as the USB one when
         * coming from cold reset. Without this, aspeed_clk_enable()
         * will fail to lift the reset.
         */
        if (gate->reset_idx >= 0) {
                regmap_read(gate->map, get_reset_reg(gate), &reg);

                if (reg & rst)
                        return 0;
        }

        regmap_read(gate->map, get_clock_reg(gate), &reg);

        enval = (gate->flags & CLK_GATE_SET_TO_DISABLE) ? 0 : clk;

        return ((reg & clk) == enval) ? 1 : 0;
}

static int aspeed_g6_clk_enable(struct clk_hw *hw)
{
        struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
        unsigned long flags;
        u32 clk = get_bit(gate->clock_idx);
        u32 rst = get_bit(gate->reset_idx);

        spin_lock_irqsave(gate->lock, flags);

        if (aspeed_g6_clk_is_enabled(hw)) {
                spin_unlock_irqrestore(gate->lock, flags);
                return 0;
        }

        if (gate->reset_idx >= 0) {
                /* Put IP in reset */
                regmap_write(gate->map, get_reset_reg(gate), rst);
                /* Delay 100us */
                udelay(100);
        }

        /* Enable clock */
        if (gate->flags & CLK_GATE_SET_TO_DISABLE) {
                /* Clock is clear to enable, so use set to clear register */
                regmap_write(gate->map, get_clock_reg(gate) + 0x04, clk);
        } else {
                /* Clock is set to enable, so use write to set register */
                regmap_write(gate->map, get_clock_reg(gate), clk);
        }

        if (gate->reset_idx >= 0) {
                /* A delay of 10ms is specified by the ASPEED docs */
                mdelay(10);
                /* Take IP out of reset */
                regmap_write(gate->map, get_reset_reg(gate) + 0x4, rst);
        }

        spin_unlock_irqrestore(gate->lock, flags);

        return 0;
}

static void aspeed_g6_clk_disable(struct clk_hw *hw)
{
        struct aspeed_clk_gate *gate = to_aspeed_clk_gate(hw);
        unsigned long flags;
        u32 clk = get_bit(gate->clock_idx);

        spin_lock_irqsave(gate->lock, flags);

        if (gate->flags & CLK_GATE_SET_TO_DISABLE) {
                regmap_write(gate->map, get_clock_reg(gate), clk);
        } else {
                /* Use set to clear register */
                regmap_write(gate->map, get_clock_reg(gate) + 0x4, clk);
        }

        spin_unlock_irqrestore(gate->lock, flags);
}

static const struct clk_ops aspeed_g6_clk_gate_ops = {
        .enable = aspeed_g6_clk_enable,
        .disable = aspeed_g6_clk_disable,
        .is_enabled = aspeed_g6_clk_is_enabled,
};

static int aspeed_g6_reset_deassert(struct reset_controller_dev *rcdev,
                                    unsigned long id)
{
        struct aspeed_reset *ar = to_aspeed_reset(rcdev);
        u32 rst = get_bit(id);
        u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL;

        /* Use set to clear register */
        return regmap_write(ar->map, reg + 0x04, rst);
}

static int aspeed_g6_reset_assert(struct reset_controller_dev *rcdev,
                                  unsigned long id)
{
        struct aspeed_reset *ar = to_aspeed_reset(rcdev);
        u32 rst = get_bit(id);
        u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL;

        return regmap_write(ar->map, reg, rst);
}

static int aspeed_g6_reset_status(struct reset_controller_dev *rcdev,
                                  unsigned long id)
{
        struct aspeed_reset *ar = to_aspeed_reset(rcdev);
        int ret;
        u32 val;
        u32 rst = get_bit(id);
        u32 reg = id >= 32 ? ASPEED_G6_RESET_CTRL2 : ASPEED_G6_RESET_CTRL;

        ret = regmap_read(ar->map, reg, &val);
        if (ret)
                return ret;

        return !!(val & rst);
}

static const struct reset_control_ops aspeed_g6_reset_ops = {
        .assert = aspeed_g6_reset_assert,
        .deassert = aspeed_g6_reset_deassert,
        .status = aspeed_g6_reset_status,
};

static struct clk_hw *aspeed_g6_clk_hw_register_gate(struct device *dev,
                const char *name, const char *parent_name, unsigned long flags,
                struct regmap *map, u8 clock_idx, u8 reset_idx,
                u8 clk_gate_flags, spinlock_t *lock)
{
        struct aspeed_clk_gate *gate;
        struct clk_init_data init;
        struct clk_hw *hw;
        int ret;

        gate = kzalloc_obj(*gate);
        if (!gate)
                return ERR_PTR(-ENOMEM);

        init.name = name;
        init.ops = &aspeed_g6_clk_gate_ops;
        init.flags = flags;
        init.parent_names = parent_name ? &parent_name : NULL;
        init.num_parents = parent_name ? 1 : 0;

        gate->map = map;
        gate->clock_idx = clock_idx;
        gate->reset_idx = reset_idx;
        gate->flags = clk_gate_flags;
        gate->lock = lock;
        gate->hw.init = &init;

        hw = &gate->hw;
        ret = clk_hw_register(dev, hw);
        if (ret) {
                kfree(gate);
                hw = ERR_PTR(ret);
        }

        return hw;
}

static const char *const emmc_extclk_parent_names[] = {
        "emmc_extclk_hpll_in",
        "mpll",
};

static const char * const vclk_parent_names[] = {
        "dpll",
        "d1pll",
        "hclk",
        "mclk",
};

static const char * const d1clk_parent_names[] = {
        "dpll",
        "epll",
        "usb-phy-40m",
        "gpioc6_clkin",
        "dp_phy_pll",
};

static int aspeed_g6_clk_probe(struct platform_device *pdev)
{
        struct device *dev = &pdev->dev;
        struct aspeed_reset *ar;
        struct regmap *map;
        struct clk_hw *hw;
        u32 val, rate;
        int i, ret;

        map = syscon_node_to_regmap(dev->of_node);
        if (IS_ERR(map)) {
                dev_err(dev, "no syscon regmap\n");
                return PTR_ERR(map);
        }

        ar = devm_kzalloc(dev, sizeof(*ar), GFP_KERNEL);
        if (!ar)
                return -ENOMEM;

        ar->map = map;

        ar->rcdev.owner = THIS_MODULE;
        ar->rcdev.nr_resets = 64;
        ar->rcdev.ops = &aspeed_g6_reset_ops;
        ar->rcdev.of_node = dev->of_node;

        ret = devm_reset_controller_register(dev, &ar->rcdev);
        if (ret) {
                dev_err(dev, "could not register reset controller\n");
                return ret;
        }

        /* UART clock div13 setting */
        regmap_read(map, ASPEED_G6_MISC_CTRL, &val);
        if (val & UART_DIV13_EN)
                rate = 24000000 / 13;
        else
                rate = 24000000;
        hw = clk_hw_register_fixed_rate(dev, "uart", NULL, 0, rate);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_UART] = hw;

        /* UART6~13 clock div13 setting */
        regmap_read(map, 0x80, &val);
        if (val & BIT(31))
                rate = 24000000 / 13;
        else
                rate = 24000000;
        hw = clk_hw_register_fixed_rate(dev, "uartx", NULL, 0, rate);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_UARTX] = hw;

        /* EMMC ext clock */
        hw = clk_hw_register_fixed_factor(dev, "emmc_extclk_hpll_in", "hpll",
                                          0, 1, 2);
        if (IS_ERR(hw))
                return PTR_ERR(hw);

        hw = clk_hw_register_mux(dev, "emmc_extclk_mux",
                                 emmc_extclk_parent_names,
                                 ARRAY_SIZE(emmc_extclk_parent_names), 0,
                                 scu_g6_base + ASPEED_G6_CLK_SELECTION1, 11, 1,
                                 0, &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);

        hw = clk_hw_register_gate(dev, "emmc_extclk_gate", "emmc_extclk_mux",
                                  0, scu_g6_base + ASPEED_G6_CLK_SELECTION1,
                                  15, 0, &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);

        hw = clk_hw_register_divider_table(dev, "emmc_extclk",
                                           "emmc_extclk_gate", 0,
                                           scu_g6_base +
                                                ASPEED_G6_CLK_SELECTION1, 12,
                                           3, 0, ast2600_emmc_extclk_div_table,
                                           &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_EMMC] = hw;

        /* SD/SDIO clock divider and gate */
        hw = clk_hw_register_gate(dev, "sd_extclk_gate", "hpll", 0,
                        scu_g6_base + ASPEED_G6_CLK_SELECTION4, 31, 0,
                        &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        hw = clk_hw_register_divider_table(dev, "sd_extclk", "sd_extclk_gate",
                        0, scu_g6_base + ASPEED_G6_CLK_SELECTION4, 28, 3, 0,
                        ast2600_div_table,
                        &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_SDIO] = hw;

        /* MAC1/2 RMII 50MHz RCLK */
        hw = clk_hw_register_fixed_rate(dev, "mac12rclk", "hpll", 0, 50000000);
        if (IS_ERR(hw))
                return PTR_ERR(hw);

        /* MAC1/2 AHB bus clock divider */
        hw = clk_hw_register_divider_table(dev, "mac12", "hpll", 0,
                        scu_g6_base + ASPEED_G6_CLK_SELECTION1, 16, 3, 0,
                        ast2600_mac_div_table,
                        &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_MAC12] = hw;

        /* RMII1 50MHz (RCLK) output enable */
        hw = clk_hw_register_gate(dev, "mac1rclk", "mac12rclk", 0,
                        scu_g6_base + ASPEED_MAC12_CLK_DLY, 29, 0,
                        &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_MAC1RCLK] = hw;

        /* RMII2 50MHz (RCLK) output enable */
        hw = clk_hw_register_gate(dev, "mac2rclk", "mac12rclk", 0,
                        scu_g6_base + ASPEED_MAC12_CLK_DLY, 30, 0,
                        &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_MAC2RCLK] = hw;

        /* MAC1/2 RMII 50MHz RCLK */
        hw = clk_hw_register_fixed_rate(dev, "mac34rclk", "hclk", 0, 50000000);
        if (IS_ERR(hw))
                return PTR_ERR(hw);

        /* MAC3/4 AHB bus clock divider */
        hw = clk_hw_register_divider_table(dev, "mac34", "hpll", 0,
                        scu_g6_base + 0x310, 24, 3, 0,
                        ast2600_mac_div_table,
                        &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_MAC34] = hw;

        /* RMII3 50MHz (RCLK) output enable */
        hw = clk_hw_register_gate(dev, "mac3rclk", "mac34rclk", 0,
                        scu_g6_base + ASPEED_MAC34_CLK_DLY, 29, 0,
                        &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_MAC3RCLK] = hw;

        /* RMII4 50MHz (RCLK) output enable */
        hw = clk_hw_register_gate(dev, "mac4rclk", "mac34rclk", 0,
                        scu_g6_base + ASPEED_MAC34_CLK_DLY, 30, 0,
                        &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_MAC4RCLK] = hw;

        /* LPC Host (LHCLK) clock divider */
        hw = clk_hw_register_divider_table(dev, "lhclk", "hpll", 0,
                        scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0,
                        ast2600_div_table,
                        &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_LHCLK] = hw;

        /* gfx d1clk : use dp clk */
        regmap_update_bits(map, ASPEED_G6_CLK_SELECTION1, GENMASK(10, 8), BIT(10));
        /* SoC Display clock selection */
        hw = clk_hw_register_mux(dev, "d1clk", d1clk_parent_names,
                        ARRAY_SIZE(d1clk_parent_names), 0,
                        scu_g6_base + ASPEED_G6_CLK_SELECTION1, 8, 3, 0,
                        &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_D1CLK] = hw;

        /* d1 clk div 0x308[17:15] x [14:12] - 8,7,6,5,4,3,2,1 */
        regmap_write(map, 0x308, 0x12000); /* 3x3 = 9 */

        /* P-Bus (BCLK) clock divider */
        hw = clk_hw_register_divider_table(dev, "bclk", "epll", 0,
                        scu_g6_base + ASPEED_G6_CLK_SELECTION1, 20, 3, 0,
                        ast2600_div_table,
                        &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_BCLK] = hw;

        /* Video Capture clock selection */
        hw = clk_hw_register_mux(dev, "vclk", vclk_parent_names,
                        ARRAY_SIZE(vclk_parent_names), 0,
                        scu_g6_base + ASPEED_G6_CLK_SELECTION2, 12, 3, 0,
                        &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_VCLK] = hw;

        /* Video Engine clock divider */
        hw = clk_hw_register_divider_table(dev, "eclk", NULL, 0,
                        scu_g6_base + ASPEED_G6_CLK_SELECTION1, 28, 3, 0,
                        ast2600_eclk_div_table,
                        &aspeed_g6_clk_lock);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        aspeed_g6_clk_data->hws[ASPEED_CLK_ECLK] = hw;

        for (i = 0; i < ARRAY_SIZE(aspeed_g6_gates); i++) {
                const struct aspeed_gate_data *gd = &aspeed_g6_gates[i];
                u32 gate_flags;

                if (!gd->name)
                        continue;

                /*
                 * Special case: the USB port 1 clock (bit 14) is always
                 * working the opposite way from the other ones.
                 */
                gate_flags = (gd->clock_idx == 14) ? 0 : CLK_GATE_SET_TO_DISABLE;
                hw = aspeed_g6_clk_hw_register_gate(dev,
                                gd->name,
                                gd->parent_name,
                                gd->flags,
                                map,
                                gd->clock_idx,
                                gd->reset_idx,
                                gate_flags,
                                &aspeed_g6_clk_lock);
                if (IS_ERR(hw))
                        return PTR_ERR(hw);
                aspeed_g6_clk_data->hws[i] = hw;
        }

        return 0;
};

static const struct of_device_id aspeed_g6_clk_dt_ids[] = {
        { .compatible = "aspeed,ast2600-scu" },
        { }
};

static struct platform_driver aspeed_g6_clk_driver = {
        .probe  = aspeed_g6_clk_probe,
        .driver = {
                .name = "ast2600-clk",
                .of_match_table = aspeed_g6_clk_dt_ids,
                .suppress_bind_attrs = true,
        },
};
builtin_platform_driver(aspeed_g6_clk_driver);

static const u32 ast2600_a0_axi_ahb_div_table[] = {
        2, 2, 3, 5,
};

static const u32 ast2600_a1_axi_ahb_div0_tbl[] = {
        3, 2, 3, 4,
};

static const u32 ast2600_a1_axi_ahb_div1_tbl[] = {
        3, 4, 6, 8,
};

static const u32 ast2600_a1_axi_ahb200_tbl[] = {
        3, 4, 3, 4, 2, 2, 2, 2,
};

static void __init aspeed_g6_cc(struct regmap *map)
{
        struct clk_hw *hw;
        u32 val, div, divbits, axi_div, ahb_div;

        clk_hw_register_fixed_rate(NULL, "clkin", NULL, 0, 25000000);

        /*
         * High-speed PLL clock derived from the crystal. This the CPU clock,
         * and we assume that it is enabled
         */
        regmap_read(map, ASPEED_HPLL_PARAM, &val);
        aspeed_g6_clk_data->hws[ASPEED_CLK_HPLL] = ast2600_calc_pll("hpll", val);

        regmap_read(map, ASPEED_MPLL_PARAM, &val);
        aspeed_g6_clk_data->hws[ASPEED_CLK_MPLL] = ast2600_calc_pll("mpll", val);

        regmap_read(map, ASPEED_DPLL_PARAM, &val);
        aspeed_g6_clk_data->hws[ASPEED_CLK_DPLL] = ast2600_calc_pll("dpll", val);

        regmap_read(map, ASPEED_EPLL_PARAM, &val);
        aspeed_g6_clk_data->hws[ASPEED_CLK_EPLL] = ast2600_calc_pll("epll", val);

        regmap_read(map, ASPEED_APLL_PARAM, &val);
        aspeed_g6_clk_data->hws[ASPEED_CLK_APLL] = ast2600_calc_apll("apll", val);

        /* Strap bits 12:11 define the AXI/AHB clock frequency ratio (aka HCLK)*/
        regmap_read(map, ASPEED_G6_STRAP1, &val);
        if (val & BIT(16))
                axi_div = 1;
        else
                axi_div = 2;

        divbits = (val >> 11) & 0x3;
        if (soc_rev >= 1) {
                if (!divbits) {
                        ahb_div = ast2600_a1_axi_ahb200_tbl[(val >> 8) & 0x3];
                        if (val & BIT(16))
                                ahb_div *= 2;
                } else {
                        if (val & BIT(16))
                                ahb_div = ast2600_a1_axi_ahb_div1_tbl[divbits];
                        else
                                ahb_div = ast2600_a1_axi_ahb_div0_tbl[divbits];
                }
        } else {
                ahb_div = ast2600_a0_axi_ahb_div_table[(val >> 11) & 0x3];
        }

        hw = clk_hw_register_fixed_factor(NULL, "ahb", "hpll", 0, 1, axi_div * ahb_div);
        aspeed_g6_clk_data->hws[ASPEED_CLK_AHB] = hw;

        regmap_read(map, ASPEED_G6_CLK_SELECTION1, &val);
        val = (val >> 23) & 0x7;
        div = 4 * (val + 1);
        hw = clk_hw_register_fixed_factor(NULL, "apb1", "hpll", 0, 1, div);
        aspeed_g6_clk_data->hws[ASPEED_CLK_APB1] = hw;

        regmap_read(map, ASPEED_G6_CLK_SELECTION4, &val);
        val = (val >> 9) & 0x7;
        div = 2 * (val + 1);
        hw = clk_hw_register_fixed_factor(NULL, "apb2", "ahb", 0, 1, div);
        aspeed_g6_clk_data->hws[ASPEED_CLK_APB2] = hw;

        /* USB 2.0 port1 phy 40MHz clock */
        hw = clk_hw_register_fixed_rate(NULL, "usb-phy-40m", NULL, 0, 40000000);
        aspeed_g6_clk_data->hws[ASPEED_CLK_USBPHY_40M] = hw;

        /* i3c clock: source from apll, divide by 8 */
        regmap_update_bits(map, ASPEED_G6_CLK_SELECTION5,
                           I3C_CLK_SELECTION | APLL_DIV_SELECTION,
                           I3C_CLK_SELECT_APLL_DIV | APLL_DIV_8);

        hw = clk_hw_register_fixed_factor(NULL, "i3cclk", "apll", 0, 1, 8);
        aspeed_g6_clk_data->hws[ASPEED_CLK_I3C] = hw;

        hw = clk_hw_register_fixed_factor(NULL, "fsiclk", "apll", 0, 1, 4);
        aspeed_g6_clk_data->hws[ASPEED_CLK_FSI] = hw;
};

static void __init aspeed_g6_cc_init(struct device_node *np)
{
        struct regmap *map;
        int ret;
        int i;

        scu_g6_base = of_iomap(np, 0);
        if (!scu_g6_base)
                return;

        soc_rev = (readl(scu_g6_base + ASPEED_G6_SILICON_REV) & CHIP_REVISION_ID) >> 16;

        aspeed_g6_clk_data = kzalloc_flex(*aspeed_g6_clk_data, hws,
                                          ASPEED_G6_NUM_CLKS);
        if (!aspeed_g6_clk_data)
                return;
        aspeed_g6_clk_data->num = ASPEED_G6_NUM_CLKS;

        /*
         * This way all clocks fetched before the platform device probes,
         * except those we assign here for early use, will be deferred.
         */
        for (i = 0; i < ASPEED_G6_NUM_CLKS; i++)
                aspeed_g6_clk_data->hws[i] = ERR_PTR(-EPROBE_DEFER);

        /*
         * We check that the regmap works on this very first access,
         * but as this is an MMIO-backed regmap, subsequent regmap
         * access is not going to fail and we skip error checks from
         * this point.
         */
        map = syscon_node_to_regmap(np);
        if (IS_ERR(map)) {
                pr_err("no syscon regmap\n");
                return;
        }

        aspeed_g6_cc(map);
        ret = of_clk_add_hw_provider(np, of_clk_hw_onecell_get, aspeed_g6_clk_data);
        if (ret)
                pr_err("failed to add DT provider: %d\n", ret);
};
CLK_OF_DECLARE_DRIVER(aspeed_cc_g6, "aspeed,ast2600-scu", aspeed_g6_cc_init);