// SPDX-License-Identifier: GPL-2.0-only
/*
 * Copyright (c) 2012-2015, The Linux Foundation. All rights reserved.
 */

#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
#include <linux/clk-provider.h>
#include <linux/delay.h>

#include "dsi_phy.h"
#include "dsi.xml.h"
#include "dsi_phy_28nm_8960.xml.h"

/*
 * DSI PLL 28nm (8960/A family) - clock diagram (eg: DSI1):
 *
 *
 *                        +------+
 *  dsi1vco_clk ----o-----| DIV1 |---dsi1pllbit (not exposed as clock)
 *  F * byte_clk    |     +------+
 *                  | bit clock divider (F / 8)
 *                  |
 *                  |     +------+
 *                  o-----| DIV2 |---dsi0pllbyte---o---> To byte RCG
 *                  |     +------+                 | (sets parent rate)
 *                  | byte clock divider (F)       |
 *                  |                              |
 *                  |                              o---> To esc RCG
 *                  |                                (doesn't set parent rate)
 *                  |
 *                  |     +------+
 *                  o-----| DIV3 |----dsi0pll------o---> To dsi RCG
 *                        +------+                 | (sets parent rate)
 *                  dsi clock divider (F * magic)  |
 *                                                 |
 *                                                 o---> To pixel rcg
 *                                                  (doesn't set parent rate)
 */

#define POLL_MAX_READS          8000
#define POLL_TIMEOUT_US         1

#define VCO_REF_CLK_RATE        27000000
#define VCO_MIN_RATE            600000000
#define VCO_MAX_RATE            1200000000

#define VCO_PREF_DIV_RATIO      27

struct pll_28nm_cached_state {
        unsigned long vco_rate;
        u8 postdiv3;
        u8 postdiv2;
        u8 postdiv1;
};

struct clk_bytediv {
        struct clk_hw hw;
        void __iomem *reg;
};

struct dsi_pll_28nm {
        struct clk_hw clk_hw;

        struct msm_dsi_phy *phy;

        struct pll_28nm_cached_state cached_state;
};

#define to_pll_28nm(x)  container_of(x, struct dsi_pll_28nm, clk_hw)

static bool pll_28nm_poll_for_ready(struct dsi_pll_28nm *pll_28nm,
                                    int nb_tries, int timeout_us)
{
        bool pll_locked = false;
        u32 val;

        while (nb_tries--) {
                val = readl(pll_28nm->phy->pll_base + REG_DSI_28nm_8960_PHY_PLL_RDY);
                pll_locked = !!(val & DSI_28nm_8960_PHY_PLL_RDY_PLL_RDY);

                if (pll_locked)
                        break;

                udelay(timeout_us);
        }
        DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");

        return pll_locked;
}

/*
 * Clock Callbacks
 */
static int dsi_pll_28nm_clk_set_rate(struct clk_hw *hw, unsigned long rate,
                                     unsigned long parent_rate)
{
        struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw);
        void __iomem *base = pll_28nm->phy->pll_base;
        u32 val, temp, fb_divider;

        DBG("rate=%lu, parent's=%lu", rate, parent_rate);

        temp = rate / 10;
        val = VCO_REF_CLK_RATE / 10;
        fb_divider = (temp * VCO_PREF_DIV_RATIO) / val;
        fb_divider = fb_divider / 2 - 1;
        writel(fb_divider & 0xff, base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1);

        val = readl(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2);

        val |= (fb_divider >> 8) & 0x07;

        writel(val, base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2);

        val = readl(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3);

        val |= (VCO_PREF_DIV_RATIO - 1) & 0x3f;

        writel(val, base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3);

        writel(0xf, base + REG_DSI_28nm_8960_PHY_PLL_CTRL_6);

        val = readl(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
        val |= 0x7 << 4;
        writel(val, base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);

        return 0;
}

static int dsi_pll_28nm_clk_is_enabled(struct clk_hw *hw)
{
        struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw);

        return pll_28nm_poll_for_ready(pll_28nm, POLL_MAX_READS,
                                        POLL_TIMEOUT_US);
}

static unsigned long dsi_pll_28nm_clk_recalc_rate(struct clk_hw *hw,
                                                  unsigned long parent_rate)
{
        struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw);
        void __iomem *base = pll_28nm->phy->pll_base;
        unsigned long vco_rate;
        u32 status, fb_divider, temp, ref_divider;

        VERB("parent_rate=%lu", parent_rate);

        status = readl(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0);

        if (status & DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE) {
                fb_divider = readl(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_1);
                fb_divider &= 0xff;
                temp = readl(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_2) & 0x07;
                fb_divider = (temp << 8) | fb_divider;
                fb_divider += 1;

                ref_divider = readl(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_3);
                ref_divider &= 0x3f;
                ref_divider += 1;

                /* multiply by 2 */
                vco_rate = (parent_rate / ref_divider) * fb_divider * 2;
        } else {
                vco_rate = 0;
        }

        DBG("returning vco rate = %lu", vco_rate);

        return vco_rate;
}

static int dsi_pll_28nm_vco_prepare(struct clk_hw *hw)
{
        struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw);
        struct device *dev = &pll_28nm->phy->pdev->dev;
        void __iomem *base = pll_28nm->phy->pll_base;
        bool locked;
        unsigned int bit_div, byte_div;
        int max_reads = 1000, timeout_us = 100;
        u32 val;

        DBG("id=%d", pll_28nm->phy->id);

        if (unlikely(pll_28nm->phy->pll_on))
                return 0;

        /*
         * before enabling the PLL, configure the bit clock divider since we
         * don't expose it as a clock to the outside world
         * 1: read back the byte clock divider that should already be set
         * 2: divide by 8 to get bit clock divider
         * 3: write it to POSTDIV1
         */
        val = readl(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
        byte_div = val + 1;
        bit_div = byte_div / 8;

        val = readl(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);
        val &= ~0xf;
        val |= (bit_div - 1);
        writel(val, base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);

        /* enable the PLL */
        writel(DSI_28nm_8960_PHY_PLL_CTRL_0_ENABLE,
               base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0);

        locked = pll_28nm_poll_for_ready(pll_28nm, max_reads, timeout_us);

        if (unlikely(!locked)) {
                DRM_DEV_ERROR(dev, "DSI PLL lock failed\n");
                return -EINVAL;
        }

        DBG("DSI PLL lock success");
        pll_28nm->phy->pll_on = true;

        return 0;
}

static void dsi_pll_28nm_vco_unprepare(struct clk_hw *hw)
{
        struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw);

        DBG("id=%d", pll_28nm->phy->id);

        if (unlikely(!pll_28nm->phy->pll_on))
                return;

        writel(0x00, pll_28nm->phy->pll_base + REG_DSI_28nm_8960_PHY_PLL_CTRL_0);

        pll_28nm->phy->pll_on = false;
}

static int dsi_pll_28nm_clk_determine_rate(struct clk_hw *hw,
                                           struct clk_rate_request *req)
{
        struct dsi_pll_28nm *pll_28nm = to_pll_28nm(hw);

        req->rate = clamp_t(unsigned long, req->rate,
                            pll_28nm->phy->cfg->min_pll_rate, pll_28nm->phy->cfg->max_pll_rate);

        return 0;
}

static const struct clk_ops clk_ops_dsi_pll_28nm_vco = {
        .determine_rate = dsi_pll_28nm_clk_determine_rate,
        .set_rate = dsi_pll_28nm_clk_set_rate,
        .recalc_rate = dsi_pll_28nm_clk_recalc_rate,
        .prepare = dsi_pll_28nm_vco_prepare,
        .unprepare = dsi_pll_28nm_vco_unprepare,
        .is_enabled = dsi_pll_28nm_clk_is_enabled,
};

/*
 * Custom byte clock divier clk_ops
 *
 * This clock is the entry point to configuring the PLL. The user (dsi host)
 * will set this clock's rate to the desired byte clock rate. The VCO lock
 * frequency is a multiple of the byte clock rate. The multiplication factor
 * (shown as F in the diagram above) is a function of the byte clock rate.
 *
 * This custom divider clock ensures that its parent (VCO) is set to the
 * desired rate, and that the byte clock postdivider (POSTDIV2) is configured
 * accordingly
 */
#define to_clk_bytediv(_hw) container_of(_hw, struct clk_bytediv, hw)

static unsigned long clk_bytediv_recalc_rate(struct clk_hw *hw,
                unsigned long parent_rate)
{
        struct clk_bytediv *bytediv = to_clk_bytediv(hw);
        unsigned int div;

        div = readl(bytediv->reg) & 0xff;

        return parent_rate / (div + 1);
}

/* find multiplication factor(wrt byte clock) at which the VCO should be set */
static unsigned int get_vco_mul_factor(unsigned long byte_clk_rate)
{
        unsigned long bit_mhz;

        /* convert to bit clock in Mhz */
        bit_mhz = (byte_clk_rate * 8) / 1000000;

        if (bit_mhz < 125)
                return 64;
        else if (bit_mhz < 250)
                return 32;
        else if (bit_mhz < 600)
                return 16;
        else
                return 8;
}

static int clk_bytediv_determine_rate(struct clk_hw *hw,
                                      struct clk_rate_request *req)
{
        unsigned long best_parent;
        unsigned int factor;

        factor = get_vco_mul_factor(req->rate);

        best_parent = req->rate * factor;
        req->best_parent_rate = clk_hw_round_rate(clk_hw_get_parent(hw), best_parent);

        req->rate = req->best_parent_rate / factor;

        return 0;
}

static int clk_bytediv_set_rate(struct clk_hw *hw, unsigned long rate,
                                unsigned long parent_rate)
{
        struct clk_bytediv *bytediv = to_clk_bytediv(hw);
        u32 val;
        unsigned int factor;

        factor = get_vco_mul_factor(rate);

        val = readl(bytediv->reg);
        val |= (factor - 1) & 0xff;
        writel(val, bytediv->reg);

        return 0;
}

/* Our special byte clock divider ops */
static const struct clk_ops clk_bytediv_ops = {
        .determine_rate = clk_bytediv_determine_rate,
        .set_rate = clk_bytediv_set_rate,
        .recalc_rate = clk_bytediv_recalc_rate,
};

/*
 * PLL Callbacks
 */
static void dsi_28nm_pll_save_state(struct msm_dsi_phy *phy)
{
        struct dsi_pll_28nm *pll_28nm = to_pll_28nm(phy->vco_hw);
        struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
        void __iomem *base = pll_28nm->phy->pll_base;

        cached_state->postdiv3 =
                        readl(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10);
        cached_state->postdiv2 =
                        readl(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
        cached_state->postdiv1 =
                        readl(base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);

        cached_state->vco_rate = clk_hw_get_rate(phy->vco_hw);
}

static int dsi_28nm_pll_restore_state(struct msm_dsi_phy *phy)
{
        struct dsi_pll_28nm *pll_28nm = to_pll_28nm(phy->vco_hw);
        struct pll_28nm_cached_state *cached_state = &pll_28nm->cached_state;
        void __iomem *base = pll_28nm->phy->pll_base;
        int ret;

        ret = dsi_pll_28nm_clk_set_rate(phy->vco_hw,
                                        cached_state->vco_rate, 0);
        if (ret) {
                DRM_DEV_ERROR(&pll_28nm->phy->pdev->dev,
                              "restore vco rate failed. ret=%d\n", ret);
                return ret;
        }

        writel(cached_state->postdiv3, base + REG_DSI_28nm_8960_PHY_PLL_CTRL_10);
        writel(cached_state->postdiv2, base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9);
        writel(cached_state->postdiv1, base + REG_DSI_28nm_8960_PHY_PLL_CTRL_8);

        return 0;
}

static int pll_28nm_register(struct dsi_pll_28nm *pll_28nm, struct clk_hw **provided_clocks)
{
        char clk_name[32];
        struct clk_init_data vco_init = {
                .parent_data = &(const struct clk_parent_data) {
                        .fw_name = "ref",
                },
                .num_parents = 1,
                .flags = CLK_IGNORE_UNUSED,
                .ops = &clk_ops_dsi_pll_28nm_vco,
        };
        struct device *dev = &pll_28nm->phy->pdev->dev;
        struct clk_hw *hw;
        struct clk_bytediv *bytediv;
        struct clk_init_data bytediv_init = { };
        int ret;

        DBG("%d", pll_28nm->phy->id);

        bytediv = devm_kzalloc(dev, sizeof(*bytediv), GFP_KERNEL);
        if (!bytediv)
                return -ENOMEM;

        snprintf(clk_name, sizeof(clk_name), "dsi%dvco_clk", pll_28nm->phy->id);
        vco_init.name = clk_name;

        pll_28nm->clk_hw.init = &vco_init;

        ret = devm_clk_hw_register(dev, &pll_28nm->clk_hw);
        if (ret)
                return ret;

        /* prepare and register bytediv */
        bytediv->hw.init = &bytediv_init;
        bytediv->reg = pll_28nm->phy->pll_base + REG_DSI_28nm_8960_PHY_PLL_CTRL_9;

        snprintf(clk_name, sizeof(clk_name), "dsi%dpllbyte", pll_28nm->phy->id + 1);

        bytediv_init.name = clk_name;
        bytediv_init.ops = &clk_bytediv_ops;
        bytediv_init.flags = CLK_SET_RATE_PARENT;
        bytediv_init.parent_hws = (const struct clk_hw*[]){
                &pll_28nm->clk_hw,
        };
        bytediv_init.num_parents = 1;

        /* DIV2 */
        ret = devm_clk_hw_register(dev, &bytediv->hw);
        if (ret)
                return ret;
        provided_clocks[DSI_BYTE_PLL_CLK] = &bytediv->hw;

        snprintf(clk_name, sizeof(clk_name), "dsi%dpll", pll_28nm->phy->id + 1);
        /* DIV3 */
        hw = devm_clk_hw_register_divider_parent_hw(dev, clk_name,
                        &pll_28nm->clk_hw, 0, pll_28nm->phy->pll_base +
                                REG_DSI_28nm_8960_PHY_PLL_CTRL_10,
                        0, 8, 0, NULL);
        if (IS_ERR(hw))
                return PTR_ERR(hw);
        provided_clocks[DSI_PIXEL_PLL_CLK] = hw;

        return 0;
}

static int dsi_pll_28nm_8960_init(struct msm_dsi_phy *phy)
{
        struct platform_device *pdev = phy->pdev;
        struct dsi_pll_28nm *pll_28nm;
        int ret;

        if (!pdev)
                return -ENODEV;

        pll_28nm = devm_kzalloc(&pdev->dev, sizeof(*pll_28nm), GFP_KERNEL);
        if (!pll_28nm)
                return -ENOMEM;

        pll_28nm->phy = phy;

        ret = pll_28nm_register(pll_28nm, phy->provided_clocks->hws);
        if (ret) {
                DRM_DEV_ERROR(&pdev->dev, "failed to register PLL: %d\n", ret);
                return ret;
        }

        phy->vco_hw = &pll_28nm->clk_hw;

        return 0;
}

static void dsi_28nm_dphy_set_timing(struct msm_dsi_phy *phy,
                struct msm_dsi_dphy_timing *timing)
{
        void __iomem *base = phy->base;

        writel(DSI_28nm_8960_PHY_TIMING_CTRL_0_CLK_ZERO(timing->clk_zero),
               base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_0);
        writel(DSI_28nm_8960_PHY_TIMING_CTRL_1_CLK_TRAIL(timing->clk_trail),
               base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_1);
        writel(DSI_28nm_8960_PHY_TIMING_CTRL_2_CLK_PREPARE(timing->clk_prepare),
               base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_2);
        writel(0, base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_3);
        writel(DSI_28nm_8960_PHY_TIMING_CTRL_4_HS_EXIT(timing->hs_exit),
               base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_4);
        writel(DSI_28nm_8960_PHY_TIMING_CTRL_5_HS_ZERO(timing->hs_zero),
               base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_5);
        writel(DSI_28nm_8960_PHY_TIMING_CTRL_6_HS_PREPARE(timing->hs_prepare),
               base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_6);
        writel(DSI_28nm_8960_PHY_TIMING_CTRL_7_HS_TRAIL(timing->hs_trail),
               base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_7);
        writel(DSI_28nm_8960_PHY_TIMING_CTRL_8_HS_RQST(timing->hs_rqst),
               base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_8);
        writel(DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_GO(timing->ta_go) |
               DSI_28nm_8960_PHY_TIMING_CTRL_9_TA_SURE(timing->ta_sure),
               base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_9);
        writel(DSI_28nm_8960_PHY_TIMING_CTRL_10_TA_GET(timing->ta_get),
               base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_10);
        writel(DSI_28nm_8960_PHY_TIMING_CTRL_11_TRIG3_CMD(0),
               base + REG_DSI_28nm_8960_PHY_TIMING_CTRL_11);
}

static void dsi_28nm_phy_regulator_init(struct msm_dsi_phy *phy)
{
        void __iomem *base = phy->reg_base;

        writel(0x3, base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_0);
        writel(1, base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_1);
        writel(1, base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_2);
        writel(0, base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_3);
        writel(0x100, base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_4);
}

static void dsi_28nm_phy_regulator_ctrl(struct msm_dsi_phy *phy)
{
        void __iomem *base = phy->reg_base;

        writel(0x3, base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_0);
        writel(0xa, base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_1);
        writel(0x4, base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_2);
        writel(0x0, base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_3);
        writel(0x20, base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CTRL_4);
}

static void dsi_28nm_phy_calibration(struct msm_dsi_phy *phy)
{
        void __iomem *base = phy->reg_base;
        u32 status;
        int i = 5000;

        writel(0x3, base + REG_DSI_28nm_8960_PHY_MISC_REGULATOR_CAL_PWR_CFG);

        writel(0x0, base + REG_DSI_28nm_8960_PHY_MISC_CAL_SW_CFG_2);
        writel(0x5a, base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_1);
        writel(0x10, base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_3);
        writel(0x1, base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_4);
        writel(0x1, base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_CFG_0);

        writel(0x1, base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_TRIGGER);
        usleep_range(5000, 6000);
        writel(0x0, base + REG_DSI_28nm_8960_PHY_MISC_CAL_HW_TRIGGER);

        do {
                status = readl(base +
                                REG_DSI_28nm_8960_PHY_MISC_CAL_STATUS);

                if (!(status & DSI_28nm_8960_PHY_MISC_CAL_STATUS_CAL_BUSY))
                        break;

                udelay(1);
        } while (--i > 0);
}

static void dsi_28nm_phy_lane_config(struct msm_dsi_phy *phy)
{
        void __iomem *base = phy->base;
        int i;

        for (i = 0; i < 4; i++) {
                writel(0x80, base + REG_DSI_28nm_8960_PHY_LN_CFG_0(i));
                writel(0x45, base + REG_DSI_28nm_8960_PHY_LN_CFG_1(i));
                writel(0x00, base + REG_DSI_28nm_8960_PHY_LN_CFG_2(i));
                writel(0x00, base + REG_DSI_28nm_8960_PHY_LN_TEST_DATAPATH(i));
                writel(0x01, base + REG_DSI_28nm_8960_PHY_LN_TEST_STR_0(i));
                writel(0x66, base + REG_DSI_28nm_8960_PHY_LN_TEST_STR_1(i));
        }

        writel(0x40, base + REG_DSI_28nm_8960_PHY_LNCK_CFG_0);
        writel(0x67, base + REG_DSI_28nm_8960_PHY_LNCK_CFG_1);
        writel(0x0, base + REG_DSI_28nm_8960_PHY_LNCK_CFG_2);
        writel(0x0, base + REG_DSI_28nm_8960_PHY_LNCK_TEST_DATAPATH);
        writel(0x1, base + REG_DSI_28nm_8960_PHY_LNCK_TEST_STR0);
        writel(0x88, base + REG_DSI_28nm_8960_PHY_LNCK_TEST_STR1);
}

static int dsi_28nm_phy_enable(struct msm_dsi_phy *phy,
                                struct msm_dsi_phy_clk_request *clk_req)
{
        struct msm_dsi_dphy_timing *timing = &phy->timing;
        void __iomem *base = phy->base;

        DBG("");

        if (msm_dsi_dphy_timing_calc(timing, clk_req)) {
                DRM_DEV_ERROR(&phy->pdev->dev,
                              "%s: D-PHY timing calculation failed\n",
                              __func__);
                return -EINVAL;
        }

        dsi_28nm_phy_regulator_init(phy);

        writel(0x04, base + REG_DSI_28nm_8960_PHY_LDO_CTRL);

        /* strength control */
        writel(0xff, base + REG_DSI_28nm_8960_PHY_STRENGTH_0);
        writel(0x00, base + REG_DSI_28nm_8960_PHY_STRENGTH_1);
        writel(0x06, base + REG_DSI_28nm_8960_PHY_STRENGTH_2);

        /* phy ctrl */
        writel(0x5f, base + REG_DSI_28nm_8960_PHY_CTRL_0);
        writel(0x00, base + REG_DSI_28nm_8960_PHY_CTRL_1);
        writel(0x00, base + REG_DSI_28nm_8960_PHY_CTRL_2);
        writel(0x10, base + REG_DSI_28nm_8960_PHY_CTRL_3);

        dsi_28nm_phy_regulator_ctrl(phy);

        dsi_28nm_phy_calibration(phy);

        dsi_28nm_phy_lane_config(phy);

        writel(0x0f, base + REG_DSI_28nm_8960_PHY_BIST_CTRL_4);
        writel(0x03, base + REG_DSI_28nm_8960_PHY_BIST_CTRL_1);
        writel(0x03, base + REG_DSI_28nm_8960_PHY_BIST_CTRL_0);
        writel(0x0, base + REG_DSI_28nm_8960_PHY_BIST_CTRL_4);

        dsi_28nm_dphy_set_timing(phy, timing);

        return 0;
}

static void dsi_28nm_phy_disable(struct msm_dsi_phy *phy)
{
        writel(0x0, phy->base + REG_DSI_28nm_8960_PHY_CTRL_0);

        /*
         * Wait for the registers writes to complete in order to
         * ensure that the phy is completely disabled
         */
        wmb();
}

static const struct regulator_bulk_data dsi_phy_28nm_8960_regulators[] = {
        { .supply = "vddio", .init_load_uA = 100000 },  /* 1.8 V */
};

const struct msm_dsi_phy_cfg dsi_phy_28nm_8960_cfgs = {
        .has_phy_regulator = true,
        .regulator_data = dsi_phy_28nm_8960_regulators,
        .num_regulators = ARRAY_SIZE(dsi_phy_28nm_8960_regulators),
        .ops = {
                .enable = dsi_28nm_phy_enable,
                .disable = dsi_28nm_phy_disable,
                .pll_init = dsi_pll_28nm_8960_init,
                .save_pll_state = dsi_28nm_pll_save_state,
                .restore_pll_state = dsi_28nm_pll_restore_state,
        },
        .min_pll_rate = VCO_MIN_RATE,
        .max_pll_rate = VCO_MAX_RATE,
        .io_start = { 0x4700300, 0x5800300 },
        .num_dsi_phy = 2,
};