// SPDX-License-Identifier: GPL-2.0+
/*
 * Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable
 *
 * Current development and maintenance by:
 *   (c) 2000, 2001 Robert Baruch (autophile@starband.net)
 *   (c) 2004, 2005 Daniel Drake <dsd@gentoo.org>
 *
 * Developed with the assistance of:
 *   (c) 2002 Alan Stern <stern@rowland.org>
 *
 * Flash support based on earlier work by:
 *   (c) 2002 Thomas Kreiling <usbdev@sm04.de>
 *
 * Many originally ATAPI devices were slightly modified to meet the USB
 * market by using some kind of translation from ATAPI to USB on the host,
 * and the peripheral would translate from USB back to ATAPI.
 *
 * SCM Microsystems (www.scmmicro.com) makes a device, sold to OEM's only, 
 * which does the USB-to-ATAPI conversion.  By obtaining the data sheet on
 * their device under nondisclosure agreement, I have been able to write
 * this driver for Linux.
 *
 * The chip used in the device can also be used for EPP and ISA translation
 * as well. This driver is only guaranteed to work with the ATAPI
 * translation.
 *
 * See the Kconfig help text for a list of devices known to be supported by
 * this driver.
 */

#include <linux/errno.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/string_choices.h>
#include <linux/cdrom.h>

#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>

#include "usb.h"
#include "transport.h"
#include "protocol.h"
#include "debug.h"
#include "scsiglue.h"

#define DRV_NAME "ums-usbat"

MODULE_DESCRIPTION("Driver for SCM Microsystems (a.k.a. Shuttle) USB-ATAPI cable");
MODULE_AUTHOR("Daniel Drake <dsd@gentoo.org>, Robert Baruch <autophile@starband.net>");
MODULE_LICENSE("GPL");
MODULE_IMPORT_NS("USB_STORAGE");

/* Supported device types */
#define USBAT_DEV_HP8200        0x01
#define USBAT_DEV_FLASH         0x02

#define USBAT_EPP_PORT          0x10
#define USBAT_EPP_REGISTER      0x30
#define USBAT_ATA               0x40
#define USBAT_ISA               0x50

/* Commands (need to be logically OR'd with an access type */
#define USBAT_CMD_READ_REG              0x00
#define USBAT_CMD_WRITE_REG             0x01
#define USBAT_CMD_READ_BLOCK    0x02
#define USBAT_CMD_WRITE_BLOCK   0x03
#define USBAT_CMD_COND_READ_BLOCK       0x04
#define USBAT_CMD_COND_WRITE_BLOCK      0x05
#define USBAT_CMD_WRITE_REGS    0x07

/* Commands (these don't need an access type) */
#define USBAT_CMD_EXEC_CMD      0x80
#define USBAT_CMD_SET_FEAT      0x81
#define USBAT_CMD_UIO           0x82

/* Methods of accessing UIO register */
#define USBAT_UIO_READ  1
#define USBAT_UIO_WRITE 0

/* Qualifier bits */
#define USBAT_QUAL_FCQ  0x20    /* full compare */
#define USBAT_QUAL_ALQ  0x10    /* auto load subcount */

/* USBAT Flash Media status types */
#define USBAT_FLASH_MEDIA_NONE  0
#define USBAT_FLASH_MEDIA_CF    1

/* USBAT Flash Media change types */
#define USBAT_FLASH_MEDIA_SAME  0
#define USBAT_FLASH_MEDIA_CHANGED       1

/* USBAT ATA registers */
#define USBAT_ATA_DATA      0x10  /* read/write data (R/W) */
#define USBAT_ATA_FEATURES  0x11  /* set features (W) */
#define USBAT_ATA_ERROR     0x11  /* error (R) */
#define USBAT_ATA_SECCNT    0x12  /* sector count (R/W) */
#define USBAT_ATA_SECNUM    0x13  /* sector number (R/W) */
#define USBAT_ATA_LBA_ME    0x14  /* cylinder low (R/W) */
#define USBAT_ATA_LBA_HI    0x15  /* cylinder high (R/W) */
#define USBAT_ATA_DEVICE    0x16  /* head/device selection (R/W) */
#define USBAT_ATA_STATUS    0x17  /* device status (R) */
#define USBAT_ATA_CMD       0x17  /* device command (W) */
#define USBAT_ATA_ALTSTATUS 0x0E  /* status (no clear IRQ) (R) */

/* USBAT User I/O Data registers */
#define USBAT_UIO_EPAD          0x80 /* Enable Peripheral Control Signals */
#define USBAT_UIO_CDT           0x40 /* Card Detect (Read Only) */
                                     /* CDT = ACKD & !UI1 & !UI0 */
#define USBAT_UIO_1             0x20 /* I/O 1 */
#define USBAT_UIO_0             0x10 /* I/O 0 */
#define USBAT_UIO_EPP_ATA       0x08 /* 1=EPP mode, 0=ATA mode */
#define USBAT_UIO_UI1           0x04 /* Input 1 */
#define USBAT_UIO_UI0           0x02 /* Input 0 */
#define USBAT_UIO_INTR_ACK      0x01 /* Interrupt (ATA/ISA)/Acknowledge (EPP) */

/* USBAT User I/O Enable registers */
#define USBAT_UIO_DRVRST        0x80 /* Reset Peripheral */
#define USBAT_UIO_ACKD          0x40 /* Enable Card Detect */
#define USBAT_UIO_OE1           0x20 /* I/O 1 set=output/clr=input */
                                     /* If ACKD=1, set OE1 to 1 also. */
#define USBAT_UIO_OE0           0x10 /* I/O 0 set=output/clr=input */
#define USBAT_UIO_ADPRST        0x01 /* Reset SCM chip */

/* USBAT Features */
#define USBAT_FEAT_ETEN 0x80    /* External trigger enable */
#define USBAT_FEAT_U1   0x08
#define USBAT_FEAT_U0   0x04
#define USBAT_FEAT_ET1  0x02
#define USBAT_FEAT_ET2  0x01

struct usbat_info {
        int devicetype;

        /* Used for Flash readers only */
        unsigned long sectors;     /* total sector count */
        unsigned long ssize;       /* sector size in bytes */

        unsigned char sense_key;
        unsigned long sense_asc;   /* additional sense code */
        unsigned long sense_ascq;  /* additional sense code qualifier */
};

#define short_pack(LSB,MSB) ( ((u16)(LSB)) | ( ((u16)(MSB))<<8 ) )
#define LSB_of(s) ((s)&0xFF)
#define MSB_of(s) ((s)>>8)

static int transferred = 0;

static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us);
static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us);

static int init_usbat_cd(struct us_data *us);
static int init_usbat_flash(struct us_data *us);


/*
 * The table of devices
 */
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
                    vendorName, productName, useProtocol, useTransport, \
                    initFunction, flags) \
{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \
  .driver_info = (flags) }

static const struct usb_device_id usbat_usb_ids[] = {
#       include "unusual_usbat.h"
        { }             /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, usbat_usb_ids);

#undef UNUSUAL_DEV

/*
 * The flags table
 */
#define UNUSUAL_DEV(idVendor, idProduct, bcdDeviceMin, bcdDeviceMax, \
                    vendor_name, product_name, use_protocol, use_transport, \
                    init_function, Flags) \
{ \
        .vendorName = vendor_name,      \
        .productName = product_name,    \
        .useProtocol = use_protocol,    \
        .useTransport = use_transport,  \
        .initFunction = init_function,  \
}

static const struct us_unusual_dev usbat_unusual_dev_list[] = {
#       include "unusual_usbat.h"
        { }             /* Terminating entry */
};

#undef UNUSUAL_DEV

/*
 * Convenience function to produce an ATA read/write sectors command
 * Use cmd=0x20 for read, cmd=0x30 for write
 */
static void usbat_pack_ata_sector_cmd(unsigned char *buf,
                                        unsigned char thistime,
                                        u32 sector, unsigned char cmd)
{
        buf[0] = 0;
        buf[1] = thistime;
        buf[2] = sector & 0xFF;
        buf[3] = (sector >>  8) & 0xFF;
        buf[4] = (sector >> 16) & 0xFF;
        buf[5] = 0xE0 | ((sector >> 24) & 0x0F);
        buf[6] = cmd;
}

/*
 * Convenience function to get the device type (flash or hp8200)
 */
static int usbat_get_device_type(struct us_data *us)
{
        return ((struct usbat_info*)us->extra)->devicetype;
}

/*
 * Read a register from the device
 */
static int usbat_read(struct us_data *us,
                      unsigned char access,
                      unsigned char reg,
                      unsigned char *content)
{
        return usb_stor_ctrl_transfer(us,
                us->recv_ctrl_pipe,
                access | USBAT_CMD_READ_REG,
                0xC0,
                (u16)reg,
                0,
                content,
                1);
}

/*
 * Write to a register on the device
 */
static int usbat_write(struct us_data *us,
                       unsigned char access,
                       unsigned char reg,
                       unsigned char content)
{
        return usb_stor_ctrl_transfer(us,
                us->send_ctrl_pipe,
                access | USBAT_CMD_WRITE_REG,
                0x40,
                short_pack(reg, content),
                0,
                NULL,
                0);
}

/*
 * Convenience function to perform a bulk read
 */
static int usbat_bulk_read(struct us_data *us,
                           void* buf,
                           unsigned int len,
                           int use_sg)
{
        if (len == 0)
                return USB_STOR_XFER_GOOD;

        usb_stor_dbg(us, "len = %d\n", len);
        return usb_stor_bulk_transfer_sg(us, us->recv_bulk_pipe, buf, len, use_sg, NULL);
}

/*
 * Convenience function to perform a bulk write
 */
static int usbat_bulk_write(struct us_data *us,
                            void* buf,
                            unsigned int len,
                            int use_sg)
{
        if (len == 0)
                return USB_STOR_XFER_GOOD;

        usb_stor_dbg(us, "len = %d\n", len);
        return usb_stor_bulk_transfer_sg(us, us->send_bulk_pipe, buf, len, use_sg, NULL);
}

/*
 * Some USBAT-specific commands can only be executed over a command transport
 * This transport allows one (len=8) or two (len=16) vendor-specific commands
 * to be executed.
 */
static int usbat_execute_command(struct us_data *us,
                                                                 unsigned char *commands,
                                                                 unsigned int len)
{
        return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
                                                                  USBAT_CMD_EXEC_CMD, 0x40, 0, 0,
                                                                  commands, len);
}

/*
 * Read the status register
 */
static int usbat_get_status(struct us_data *us, unsigned char *status)
{
        int rc;
        rc = usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status);

        usb_stor_dbg(us, "0x%02X\n", *status);
        return rc;
}

/*
 * Check the device status
 */
static int usbat_check_status(struct us_data *us)
{
        unsigned char *reply = us->iobuf;
        int rc;

        rc = usbat_get_status(us, reply);
        if (rc != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_FAILED;

        /* error/check condition (0x51 is ok) */
        if (*reply & 0x01 && *reply != 0x51)
                return USB_STOR_TRANSPORT_FAILED;

        /* device fault */
        if (*reply & 0x20)
                return USB_STOR_TRANSPORT_FAILED;

        return USB_STOR_TRANSPORT_GOOD;
}

/*
 * Stores critical information in internal registers in preparation for the execution
 * of a conditional usbat_read_blocks or usbat_write_blocks call.
 */
static int usbat_set_shuttle_features(struct us_data *us,
                                      unsigned char external_trigger,
                                      unsigned char epp_control,
                                      unsigned char mask_byte,
                                      unsigned char test_pattern,
                                      unsigned char subcountH,
                                      unsigned char subcountL)
{
        unsigned char *command = us->iobuf;

        command[0] = 0x40;
        command[1] = USBAT_CMD_SET_FEAT;

        /*
         * The only bit relevant to ATA access is bit 6
         * which defines 8 bit data access (set) or 16 bit (unset)
         */
        command[2] = epp_control;

        /*
         * If FCQ is set in the qualifier (defined in R/W cmd), then bits U0, U1,
         * ET1 and ET2 define an external event to be checked for on event of a
         * _read_blocks or _write_blocks operation. The read/write will not take
         * place unless the defined trigger signal is active.
         */
        command[3] = external_trigger;

        /*
         * The resultant byte of the mask operation (see mask_byte) is compared for
         * equivalence with this test pattern. If equal, the read/write will take
         * place.
         */
        command[4] = test_pattern;

        /*
         * This value is logically ANDed with the status register field specified
         * in the read/write command.
         */
        command[5] = mask_byte;

        /*
         * If ALQ is set in the qualifier, this field contains the address of the
         * registers where the byte count should be read for transferring the data.
         * If ALQ is not set, then this field contains the number of bytes to be
         * transferred.
         */
        command[6] = subcountL;
        command[7] = subcountH;

        return usbat_execute_command(us, command, 8);
}

/*
 * Block, waiting for an ATA device to become not busy or to report
 * an error condition.
 */
static int usbat_wait_not_busy(struct us_data *us, int minutes)
{
        int i;
        int result;
        unsigned char *status = us->iobuf;

        /*
         * Synchronizing cache on a CDR could take a heck of a long time,
         * but probably not more than 10 minutes or so. On the other hand,
         * doing a full blank on a CDRW at speed 1 will take about 75
         * minutes!
         */

        for (i=0; i<1200+minutes*60; i++) {

                result = usbat_get_status(us, status);

                if (result!=USB_STOR_XFER_GOOD)
                        return USB_STOR_TRANSPORT_ERROR;
                if (*status & 0x01) { /* check condition */
                        result = usbat_read(us, USBAT_ATA, 0x10, status);
                        return USB_STOR_TRANSPORT_FAILED;
                }
                if (*status & 0x20) /* device fault */
                        return USB_STOR_TRANSPORT_FAILED;

                if ((*status & 0x80)==0x00) { /* not busy */
                        usb_stor_dbg(us, "Waited not busy for %d steps\n", i);
                        return USB_STOR_TRANSPORT_GOOD;
                }

                if (i<500)
                        msleep(10); /* 5 seconds */
                else if (i<700)
                        msleep(50); /* 10 seconds */
                else if (i<1200)
                        msleep(100); /* 50 seconds */
                else
                        msleep(1000); /* X minutes */
        }

        usb_stor_dbg(us, "Waited not busy for %d minutes, timing out\n",
                     minutes);
        return USB_STOR_TRANSPORT_FAILED;
}

/*
 * Read block data from the data register
 */
static int usbat_read_block(struct us_data *us,
                            void* buf,
                            unsigned short len,
                            int use_sg)
{
        int result;
        unsigned char *command = us->iobuf;

        if (!len)
                return USB_STOR_TRANSPORT_GOOD;

        command[0] = 0xC0;
        command[1] = USBAT_ATA | USBAT_CMD_READ_BLOCK;
        command[2] = USBAT_ATA_DATA;
        command[3] = 0;
        command[4] = 0;
        command[5] = 0;
        command[6] = LSB_of(len);
        command[7] = MSB_of(len);

        result = usbat_execute_command(us, command, 8);
        if (result != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_ERROR;

        result = usbat_bulk_read(us, buf, len, use_sg);
        return (result == USB_STOR_XFER_GOOD ?
                        USB_STOR_TRANSPORT_GOOD : USB_STOR_TRANSPORT_ERROR);
}

/*
 * Write block data via the data register
 */
static int usbat_write_block(struct us_data *us,
                             unsigned char access,
                             void* buf,
                             unsigned short len,
                             int minutes,
                             int use_sg)
{
        int result;
        unsigned char *command = us->iobuf;

        if (!len)
                return USB_STOR_TRANSPORT_GOOD;

        command[0] = 0x40;
        command[1] = access | USBAT_CMD_WRITE_BLOCK;
        command[2] = USBAT_ATA_DATA;
        command[3] = 0;
        command[4] = 0;
        command[5] = 0;
        command[6] = LSB_of(len);
        command[7] = MSB_of(len);

        result = usbat_execute_command(us, command, 8);

        if (result != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_ERROR;

        result = usbat_bulk_write(us, buf, len, use_sg);
        if (result != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_ERROR;

        return usbat_wait_not_busy(us, minutes);
}

/*
 * Process read and write requests
 */
static int usbat_hp8200e_rw_block_test(struct us_data *us,
                                       unsigned char access,
                                       unsigned char *registers,
                                       unsigned char *data_out,
                                       unsigned short num_registers,
                                       unsigned char data_reg,
                                       unsigned char status_reg,
                                       unsigned char timeout,
                                       unsigned char qualifier,
                                       int direction,
                                       void *buf,
                                       unsigned short len,
                                       int use_sg,
                                       int minutes)
{
        int result;
        unsigned int pipe = (direction == DMA_FROM_DEVICE) ?
                        us->recv_bulk_pipe : us->send_bulk_pipe;

        unsigned char *command = us->iobuf;
        int i, j;
        int cmdlen;
        unsigned char *data = us->iobuf;
        unsigned char *status = us->iobuf;

        BUG_ON(num_registers > US_IOBUF_SIZE/2);

        for (i=0; i<20; i++) {

                /*
                 * The first time we send the full command, which consists
                 * of downloading the SCSI command followed by downloading
                 * the data via a write-and-test.  Any other time we only
                 * send the command to download the data -- the SCSI command
                 * is still 'active' in some sense in the device.
                 * 
                 * We're only going to try sending the data 10 times. After
                 * that, we just return a failure.
                 */

                if (i==0) {
                        cmdlen = 16;
                        /*
                         * Write to multiple registers
                         * Not really sure the 0x07, 0x17, 0xfc, 0xe7 is
                         * necessary here, but that's what came out of the
                         * trace every single time.
                         */
                        command[0] = 0x40;
                        command[1] = access | USBAT_CMD_WRITE_REGS;
                        command[2] = 0x07;
                        command[3] = 0x17;
                        command[4] = 0xFC;
                        command[5] = 0xE7;
                        command[6] = LSB_of(num_registers*2);
                        command[7] = MSB_of(num_registers*2);
                } else
                        cmdlen = 8;

                /* Conditionally read or write blocks */
                command[cmdlen-8] = (direction==DMA_TO_DEVICE ? 0x40 : 0xC0);
                command[cmdlen-7] = access |
                                (direction==DMA_TO_DEVICE ?
                                 USBAT_CMD_COND_WRITE_BLOCK : USBAT_CMD_COND_READ_BLOCK);
                command[cmdlen-6] = data_reg;
                command[cmdlen-5] = status_reg;
                command[cmdlen-4] = timeout;
                command[cmdlen-3] = qualifier;
                command[cmdlen-2] = LSB_of(len);
                command[cmdlen-1] = MSB_of(len);

                result = usbat_execute_command(us, command, cmdlen);

                if (result != USB_STOR_XFER_GOOD)
                        return USB_STOR_TRANSPORT_ERROR;

                if (i==0) {

                        for (j=0; j<num_registers; j++) {
                                data[j<<1] = registers[j];
                                data[1+(j<<1)] = data_out[j];
                        }

                        result = usbat_bulk_write(us, data, num_registers*2, 0);
                        if (result != USB_STOR_XFER_GOOD)
                                return USB_STOR_TRANSPORT_ERROR;

                }

                result = usb_stor_bulk_transfer_sg(us,
                        pipe, buf, len, use_sg, NULL);

                /*
                 * If we get a stall on the bulk download, we'll retry
                 * the bulk download -- but not the SCSI command because
                 * in some sense the SCSI command is still 'active' and
                 * waiting for the data. Don't ask me why this should be;
                 * I'm only following what the Windoze driver did.
                 *
                 * Note that a stall for the test-and-read/write command means
                 * that the test failed. In this case we're testing to make
                 * sure that the device is error-free
                 * (i.e. bit 0 -- CHK -- of status is 0). The most likely
                 * hypothesis is that the USBAT chip somehow knows what
                 * the device will accept, but doesn't give the device any
                 * data until all data is received. Thus, the device would
                 * still be waiting for the first byte of data if a stall
                 * occurs, even if the stall implies that some data was
                 * transferred.
                 */

                if (result == USB_STOR_XFER_SHORT ||
                                result == USB_STOR_XFER_STALLED) {

                        /*
                         * If we're reading and we stalled, then clear
                         * the bulk output pipe only the first time.
                         */

                        if (direction==DMA_FROM_DEVICE && i==0) {
                                if (usb_stor_clear_halt(us,
                                                us->send_bulk_pipe) < 0)
                                        return USB_STOR_TRANSPORT_ERROR;
                        }

                        /*
                         * Read status: is the device angry, or just busy?
                         */

                        result = usbat_read(us, USBAT_ATA, 
                                direction==DMA_TO_DEVICE ?
                                        USBAT_ATA_STATUS : USBAT_ATA_ALTSTATUS,
                                status);

                        if (result!=USB_STOR_XFER_GOOD)
                                return USB_STOR_TRANSPORT_ERROR;
                        if (*status & 0x01) /* check condition */
                                return USB_STOR_TRANSPORT_FAILED;
                        if (*status & 0x20) /* device fault */
                                return USB_STOR_TRANSPORT_FAILED;

                        usb_stor_dbg(us, "Redoing %s\n",
                                     str_write_read(direction == DMA_TO_DEVICE));

                } else if (result != USB_STOR_XFER_GOOD)
                        return USB_STOR_TRANSPORT_ERROR;
                else
                        return usbat_wait_not_busy(us, minutes);

        }

        usb_stor_dbg(us, "Bummer! %s bulk data 20 times failed\n",
                     direction == DMA_TO_DEVICE ? "Writing" : "Reading");

        return USB_STOR_TRANSPORT_FAILED;
}

/*
 * Write to multiple registers:
 * Allows us to write specific data to any registers. The data to be written
 * gets packed in this sequence: reg0, data0, reg1, data1, ..., regN, dataN
 * which gets sent through bulk out.
 * Not designed for large transfers of data!
 */
static int usbat_multiple_write(struct us_data *us,
                                unsigned char *registers,
                                unsigned char *data_out,
                                unsigned short num_registers)
{
        int i, result;
        unsigned char *data = us->iobuf;
        unsigned char *command = us->iobuf;

        BUG_ON(num_registers > US_IOBUF_SIZE/2);

        /* Write to multiple registers, ATA access */
        command[0] = 0x40;
        command[1] = USBAT_ATA | USBAT_CMD_WRITE_REGS;

        /* No relevance */
        command[2] = 0;
        command[3] = 0;
        command[4] = 0;
        command[5] = 0;

        /* Number of bytes to be transferred (incl. addresses and data) */
        command[6] = LSB_of(num_registers*2);
        command[7] = MSB_of(num_registers*2);

        /* The setup command */
        result = usbat_execute_command(us, command, 8);
        if (result != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_ERROR;

        /* Create the reg/data, reg/data sequence */
        for (i=0; i<num_registers; i++) {
                data[i<<1] = registers[i];
                data[1+(i<<1)] = data_out[i];
        }

        /* Send the data */
        result = usbat_bulk_write(us, data, num_registers*2, 0);
        if (result != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_ERROR;

        if (usbat_get_device_type(us) == USBAT_DEV_HP8200)
                return usbat_wait_not_busy(us, 0);
        else
                return USB_STOR_TRANSPORT_GOOD;
}

/*
 * Conditionally read blocks from device:
 * Allows us to read blocks from a specific data register, based upon the
 * condition that a status register can be successfully masked with a status
 * qualifier. If this condition is not initially met, the read will wait
 * up until a maximum amount of time has elapsed, as specified by timeout.
 * The read will start when the condition is met, otherwise the command aborts.
 *
 * The qualifier defined here is not the value that is masked, it defines
 * conditions for the write to take place. The actual masked qualifier (and
 * other related details) are defined beforehand with _set_shuttle_features().
 */
static int usbat_read_blocks(struct us_data *us,
                             void* buffer,
                             int len,
                             int use_sg)
{
        int result;
        unsigned char *command = us->iobuf;

        command[0] = 0xC0;
        command[1] = USBAT_ATA | USBAT_CMD_COND_READ_BLOCK;
        command[2] = USBAT_ATA_DATA;
        command[3] = USBAT_ATA_STATUS;
        command[4] = 0xFD; /* Timeout (ms); */
        command[5] = USBAT_QUAL_FCQ;
        command[6] = LSB_of(len);
        command[7] = MSB_of(len);

        /* Multiple block read setup command */
        result = usbat_execute_command(us, command, 8);
        if (result != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_FAILED;
        
        /* Read the blocks we just asked for */
        result = usbat_bulk_read(us, buffer, len, use_sg);
        if (result != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_FAILED;

        return USB_STOR_TRANSPORT_GOOD;
}

/*
 * Conditionally write blocks to device:
 * Allows us to write blocks to a specific data register, based upon the
 * condition that a status register can be successfully masked with a status
 * qualifier. If this condition is not initially met, the write will wait
 * up until a maximum amount of time has elapsed, as specified by timeout.
 * The read will start when the condition is met, otherwise the command aborts.
 *
 * The qualifier defined here is not the value that is masked, it defines
 * conditions for the write to take place. The actual masked qualifier (and
 * other related details) are defined beforehand with _set_shuttle_features().
 */
static int usbat_write_blocks(struct us_data *us,
                              void* buffer,
                              int len,
                              int use_sg)
{
        int result;
        unsigned char *command = us->iobuf;

        command[0] = 0x40;
        command[1] = USBAT_ATA | USBAT_CMD_COND_WRITE_BLOCK;
        command[2] = USBAT_ATA_DATA;
        command[3] = USBAT_ATA_STATUS;
        command[4] = 0xFD; /* Timeout (ms) */
        command[5] = USBAT_QUAL_FCQ;
        command[6] = LSB_of(len);
        command[7] = MSB_of(len);

        /* Multiple block write setup command */
        result = usbat_execute_command(us, command, 8);
        if (result != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_FAILED;
        
        /* Write the data */
        result = usbat_bulk_write(us, buffer, len, use_sg);
        if (result != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_FAILED;

        return USB_STOR_TRANSPORT_GOOD;
}

/*
 * Read the User IO register
 */
static int usbat_read_user_io(struct us_data *us, unsigned char *data_flags)
{
        int result;

        result = usb_stor_ctrl_transfer(us,
                us->recv_ctrl_pipe,
                USBAT_CMD_UIO,
                0xC0,
                0,
                0,
                data_flags,
                USBAT_UIO_READ);

        usb_stor_dbg(us, "UIO register reads %02X\n", *data_flags);

        return result;
}

/*
 * Write to the User IO register
 */
static int usbat_write_user_io(struct us_data *us,
                               unsigned char enable_flags,
                               unsigned char data_flags)
{
        return usb_stor_ctrl_transfer(us,
                us->send_ctrl_pipe,
                USBAT_CMD_UIO,
                0x40,
                short_pack(enable_flags, data_flags),
                0,
                NULL,
                USBAT_UIO_WRITE);
}

/*
 * Reset the device
 * Often needed on media change.
 */
static int usbat_device_reset(struct us_data *us)
{
        int rc;

        /*
         * Reset peripheral, enable peripheral control signals
         * (bring reset signal up)
         */
        rc = usbat_write_user_io(us,
                                                         USBAT_UIO_DRVRST | USBAT_UIO_OE1 | USBAT_UIO_OE0,
                                                         USBAT_UIO_EPAD | USBAT_UIO_1);
        if (rc != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_ERROR;
                        
        /*
         * Enable peripheral control signals
         * (bring reset signal down)
         */
        rc = usbat_write_user_io(us,
                                                         USBAT_UIO_OE1  | USBAT_UIO_OE0,
                                                         USBAT_UIO_EPAD | USBAT_UIO_1);
        if (rc != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_ERROR;

        return USB_STOR_TRANSPORT_GOOD;
}

/*
 * Enable card detect
 */
static int usbat_device_enable_cdt(struct us_data *us)
{
        int rc;

        /* Enable peripheral control signals and card detect */
        rc = usbat_write_user_io(us,
                                                         USBAT_UIO_ACKD | USBAT_UIO_OE1  | USBAT_UIO_OE0,
                                                         USBAT_UIO_EPAD | USBAT_UIO_1);
        if (rc != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_ERROR;

        return USB_STOR_TRANSPORT_GOOD;
}

/*
 * Determine if media is present.
 */
static int usbat_flash_check_media_present(struct us_data *us,
                                           unsigned char *uio)
{
        if (*uio & USBAT_UIO_UI0) {
                usb_stor_dbg(us, "no media detected\n");
                return USBAT_FLASH_MEDIA_NONE;
        }

        return USBAT_FLASH_MEDIA_CF;
}

/*
 * Determine if media has changed since last operation
 */
static int usbat_flash_check_media_changed(struct us_data *us,
                                           unsigned char *uio)
{
        if (*uio & USBAT_UIO_0) {
                usb_stor_dbg(us, "media change detected\n");
                return USBAT_FLASH_MEDIA_CHANGED;
        }

        return USBAT_FLASH_MEDIA_SAME;
}

/*
 * Check for media change / no media and handle the situation appropriately
 */
static int usbat_flash_check_media(struct us_data *us,
                                   struct usbat_info *info)
{
        int rc;
        unsigned char *uio = us->iobuf;

        rc = usbat_read_user_io(us, uio);
        if (rc != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_ERROR;

        /* Check for media existence */
        rc = usbat_flash_check_media_present(us, uio);
        if (rc == USBAT_FLASH_MEDIA_NONE) {
                info->sense_key = 0x02;
                info->sense_asc = 0x3A;
                info->sense_ascq = 0x00;
                return USB_STOR_TRANSPORT_FAILED;
        }

        /* Check for media change */
        rc = usbat_flash_check_media_changed(us, uio);
        if (rc == USBAT_FLASH_MEDIA_CHANGED) {

                /* Reset and re-enable card detect */
                rc = usbat_device_reset(us);
                if (rc != USB_STOR_TRANSPORT_GOOD)
                        return rc;
                rc = usbat_device_enable_cdt(us);
                if (rc != USB_STOR_TRANSPORT_GOOD)
                        return rc;

                msleep(50);

                rc = usbat_read_user_io(us, uio);
                if (rc != USB_STOR_XFER_GOOD)
                        return USB_STOR_TRANSPORT_ERROR;
                
                info->sense_key = UNIT_ATTENTION;
                info->sense_asc = 0x28;
                info->sense_ascq = 0x00;
                return USB_STOR_TRANSPORT_FAILED;
        }

        return USB_STOR_TRANSPORT_GOOD;
}

/*
 * Determine whether we are controlling a flash-based reader/writer,
 * or a HP8200-based CD drive.
 * Sets transport functions as appropriate.
 */
static int usbat_identify_device(struct us_data *us,
                                 struct usbat_info *info)
{
        int rc;
        unsigned char status;

        if (!us || !info)
                return USB_STOR_TRANSPORT_ERROR;

        rc = usbat_device_reset(us);
        if (rc != USB_STOR_TRANSPORT_GOOD)
                return rc;
        msleep(500);

        /*
         * In attempt to distinguish between HP CDRW's and Flash readers, we now
         * execute the IDENTIFY PACKET DEVICE command. On ATA devices (i.e. flash
         * readers), this command should fail with error. On ATAPI devices (i.e.
         * CDROM drives), it should succeed.
         */
        rc = usbat_write(us, USBAT_ATA, USBAT_ATA_CMD, 0xA1);
        if (rc != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_ERROR;

        rc = usbat_get_status(us, &status);
        if (rc != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_ERROR;

        /* Check for error bit, or if the command 'fell through' */
        if (status == 0xA1 || !(status & 0x01)) {
                /* Device is HP 8200 */
                usb_stor_dbg(us, "Detected HP8200 CDRW\n");
                info->devicetype = USBAT_DEV_HP8200;
        } else {
                /* Device is a CompactFlash reader/writer */
                usb_stor_dbg(us, "Detected Flash reader/writer\n");
                info->devicetype = USBAT_DEV_FLASH;
        }

        return USB_STOR_TRANSPORT_GOOD;
}

/*
 * Set the transport function based on the device type
 */
static int usbat_set_transport(struct us_data *us,
                               struct usbat_info *info,
                               int devicetype)
{

        if (!info->devicetype)
                info->devicetype = devicetype;

        if (!info->devicetype)
                usbat_identify_device(us, info);

        switch (info->devicetype) {
        default:
                return USB_STOR_TRANSPORT_ERROR;

        case  USBAT_DEV_HP8200:
                us->transport = usbat_hp8200e_transport;
                break;

        case USBAT_DEV_FLASH:
                us->transport = usbat_flash_transport;
                break;
        }

        return 0;
}

/*
 * Read the media capacity
 */
static int usbat_flash_get_sector_count(struct us_data *us,
                                        struct usbat_info *info)
{
        unsigned char registers[3] = {
                USBAT_ATA_SECCNT,
                USBAT_ATA_DEVICE,
                USBAT_ATA_CMD,
        };
        unsigned char  command[3] = { 0x01, 0xA0, 0xEC };
        unsigned char *reply;
        unsigned char status;
        int rc;

        if (!us || !info)
                return USB_STOR_TRANSPORT_ERROR;

        reply = kmalloc(512, GFP_NOIO);
        if (!reply)
                return USB_STOR_TRANSPORT_ERROR;

        /* ATA command : IDENTIFY DEVICE */
        rc = usbat_multiple_write(us, registers, command, 3);
        if (rc != USB_STOR_XFER_GOOD) {
                usb_stor_dbg(us, "Gah! identify_device failed\n");
                rc = USB_STOR_TRANSPORT_ERROR;
                goto leave;
        }

        /* Read device status */
        if (usbat_get_status(us, &status) != USB_STOR_XFER_GOOD) {
                rc = USB_STOR_TRANSPORT_ERROR;
                goto leave;
        }

        msleep(100);

        /* Read the device identification data */
        rc = usbat_read_block(us, reply, 512, 0);
        if (rc != USB_STOR_TRANSPORT_GOOD)
                goto leave;

        info->sectors = ((u32)(reply[117]) << 24) |
                ((u32)(reply[116]) << 16) |
                ((u32)(reply[115]) <<  8) |
                ((u32)(reply[114])      );

        rc = USB_STOR_TRANSPORT_GOOD;

 leave:
        kfree(reply);
        return rc;
}

/*
 * Read data from device
 */
static int usbat_flash_read_data(struct us_data *us,
                                                                 struct usbat_info *info,
                                                                 u32 sector,
                                                                 u32 sectors)
{
        unsigned char registers[7] = {
                USBAT_ATA_FEATURES,
                USBAT_ATA_SECCNT,
                USBAT_ATA_SECNUM,
                USBAT_ATA_LBA_ME,
                USBAT_ATA_LBA_HI,
                USBAT_ATA_DEVICE,
                USBAT_ATA_STATUS,
        };
        unsigned char command[7];
        unsigned char *buffer;
        unsigned char  thistime;
        unsigned int totallen, alloclen;
        int len, result;
        unsigned int sg_offset = 0;
        struct scatterlist *sg = NULL;

        result = usbat_flash_check_media(us, info);
        if (result != USB_STOR_TRANSPORT_GOOD)
                return result;

        /*
         * we're working in LBA mode.  according to the ATA spec,
         * we can support up to 28-bit addressing.  I don't know if Jumpshot
         * supports beyond 24-bit addressing.  It's kind of hard to test
         * since it requires > 8GB CF card.
         */

        if (sector > 0x0FFFFFFF)
                return USB_STOR_TRANSPORT_ERROR;

        totallen = sectors * info->ssize;

        /*
         * Since we don't read more than 64 KB at a time, we have to create
         * a bounce buffer and move the data a piece at a time between the
         * bounce buffer and the actual transfer buffer.
         */

        alloclen = min(totallen, 65536u);
        buffer = kmalloc(alloclen, GFP_NOIO);
        if (buffer == NULL)
                return USB_STOR_TRANSPORT_ERROR;

        do {
                /*
                 * loop, never allocate or transfer more than 64k at once
                 * (min(128k, 255*info->ssize) is the real limit)
                 */
                len = min(totallen, alloclen);
                thistime = (len / info->ssize) & 0xff;
 
                /* ATA command 0x20 (READ SECTORS) */
                usbat_pack_ata_sector_cmd(command, thistime, sector, 0x20);

                /* Write/execute ATA read command */
                result = usbat_multiple_write(us, registers, command, 7);
                if (result != USB_STOR_TRANSPORT_GOOD)
                        goto leave;

                /* Read the data we just requested */
                result = usbat_read_blocks(us, buffer, len, 0);
                if (result != USB_STOR_TRANSPORT_GOOD)
                        goto leave;
         
                usb_stor_dbg(us, "%d bytes\n", len);
        
                /* Store the data in the transfer buffer */
                usb_stor_access_xfer_buf(buffer, len, us->srb,
                                         &sg, &sg_offset, TO_XFER_BUF);

                sector += thistime;
                totallen -= len;
        } while (totallen > 0);

        kfree(buffer);
        return USB_STOR_TRANSPORT_GOOD;

leave:
        kfree(buffer);
        return USB_STOR_TRANSPORT_ERROR;
}

/*
 * Write data to device
 */
static int usbat_flash_write_data(struct us_data *us,
                                                                  struct usbat_info *info,
                                                                  u32 sector,
                                                                  u32 sectors)
{
        unsigned char registers[7] = {
                USBAT_ATA_FEATURES,
                USBAT_ATA_SECCNT,
                USBAT_ATA_SECNUM,
                USBAT_ATA_LBA_ME,
                USBAT_ATA_LBA_HI,
                USBAT_ATA_DEVICE,
                USBAT_ATA_STATUS,
        };
        unsigned char command[7];
        unsigned char *buffer;
        unsigned char  thistime;
        unsigned int totallen, alloclen;
        int len, result;
        unsigned int sg_offset = 0;
        struct scatterlist *sg = NULL;

        result = usbat_flash_check_media(us, info);
        if (result != USB_STOR_TRANSPORT_GOOD)
                return result;

        /*
         * we're working in LBA mode.  according to the ATA spec,
         * we can support up to 28-bit addressing.  I don't know if the device
         * supports beyond 24-bit addressing.  It's kind of hard to test
         * since it requires > 8GB media.
         */

        if (sector > 0x0FFFFFFF)
                return USB_STOR_TRANSPORT_ERROR;

        totallen = sectors * info->ssize;

        /*
         * Since we don't write more than 64 KB at a time, we have to create
         * a bounce buffer and move the data a piece at a time between the
         * bounce buffer and the actual transfer buffer.
         */

        alloclen = min(totallen, 65536u);
        buffer = kmalloc(alloclen, GFP_NOIO);
        if (buffer == NULL)
                return USB_STOR_TRANSPORT_ERROR;

        do {
                /*
                 * loop, never allocate or transfer more than 64k at once
                 * (min(128k, 255*info->ssize) is the real limit)
                 */
                len = min(totallen, alloclen);
                thistime = (len / info->ssize) & 0xff;

                /* Get the data from the transfer buffer */
                usb_stor_access_xfer_buf(buffer, len, us->srb,
                                         &sg, &sg_offset, FROM_XFER_BUF);

                /* ATA command 0x30 (WRITE SECTORS) */
                usbat_pack_ata_sector_cmd(command, thistime, sector, 0x30);

                /* Write/execute ATA write command */
                result = usbat_multiple_write(us, registers, command, 7);
                if (result != USB_STOR_TRANSPORT_GOOD)
                        goto leave;

                /* Write the data */
                result = usbat_write_blocks(us, buffer, len, 0);
                if (result != USB_STOR_TRANSPORT_GOOD)
                        goto leave;

                sector += thistime;
                totallen -= len;
        } while (totallen > 0);

        kfree(buffer);
        return result;

leave:
        kfree(buffer);
        return USB_STOR_TRANSPORT_ERROR;
}

/*
 * Squeeze a potentially huge (> 65535 byte) read10 command into
 * a little ( <= 65535 byte) ATAPI pipe
 */
static int usbat_hp8200e_handle_read10(struct us_data *us,
                                       unsigned char *registers,
                                       unsigned char *data,
                                       struct scsi_cmnd *srb)
{
        int result = USB_STOR_TRANSPORT_GOOD;
        unsigned char *buffer;
        unsigned int len;
        unsigned int sector;
        unsigned int sg_offset = 0;
        struct scatterlist *sg = NULL;

        usb_stor_dbg(us, "transfersize %d\n", srb->transfersize);

        if (scsi_bufflen(srb) < 0x10000) {

                result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, 
                        registers, data, 19,
                        USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
                        (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
                        DMA_FROM_DEVICE,
                        scsi_sglist(srb),
                        scsi_bufflen(srb), scsi_sg_count(srb), 1);

                return result;
        }

        /*
         * Since we're requesting more data than we can handle in
         * a single read command (max is 64k-1), we will perform
         * multiple reads, but each read must be in multiples of
         * a sector.  Luckily the sector size is in srb->transfersize
         * (see linux/drivers/scsi/sr.c).
         */

        if (data[7+0] == GPCMD_READ_CD) {
                len = short_pack(data[7+9], data[7+8]);
                len <<= 16;
                len |= data[7+7];
                usb_stor_dbg(us, "GPCMD_READ_CD: len %d\n", len);
                srb->transfersize = scsi_bufflen(srb)/len;
        }

        if (!srb->transfersize)  {
                srb->transfersize = 2048; /* A guess */
                usb_stor_dbg(us, "transfersize 0, forcing %d\n",
                             srb->transfersize);
        }

        /*
         * Since we only read in one block at a time, we have to create
         * a bounce buffer and move the data a piece at a time between the
         * bounce buffer and the actual transfer buffer.
         */

        len = (65535/srb->transfersize) * srb->transfersize;
        usb_stor_dbg(us, "Max read is %d bytes\n", len);
        len = min(len, scsi_bufflen(srb));
        buffer = kmalloc(len, GFP_NOIO);
        if (buffer == NULL) /* bloody hell! */
                return USB_STOR_TRANSPORT_FAILED;
        sector = short_pack(data[7+3], data[7+2]);
        sector <<= 16;
        sector |= short_pack(data[7+5], data[7+4]);
        transferred = 0;

        while (transferred != scsi_bufflen(srb)) {

                if (len > scsi_bufflen(srb) - transferred)
                        len = scsi_bufflen(srb) - transferred;

                data[3] = len&0xFF;       /* (cylL) = expected length (L) */
                data[4] = (len>>8)&0xFF;  /* (cylH) = expected length (H) */

                /* Fix up the SCSI command sector and num sectors */

                data[7+2] = MSB_of(sector>>16); /* SCSI command sector */
                data[7+3] = LSB_of(sector>>16);
                data[7+4] = MSB_of(sector&0xFFFF);
                data[7+5] = LSB_of(sector&0xFFFF);
                if (data[7+0] == GPCMD_READ_CD)
                        data[7+6] = 0;
                data[7+7] = MSB_of(len / srb->transfersize); /* SCSI command */
                data[7+8] = LSB_of(len / srb->transfersize); /* num sectors */

                result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, 
                        registers, data, 19,
                        USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD, 
                        (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
                        DMA_FROM_DEVICE,
                        buffer,
                        len, 0, 1);

                if (result != USB_STOR_TRANSPORT_GOOD)
                        break;

                /* Store the data in the transfer buffer */
                usb_stor_access_xfer_buf(buffer, len, srb,
                                 &sg, &sg_offset, TO_XFER_BUF);

                /* Update the amount transferred and the sector number */

                transferred += len;
                sector += len / srb->transfersize;

        } /* while transferred != scsi_bufflen(srb) */

        kfree(buffer);
        return result;
}

static int usbat_select_and_test_registers(struct us_data *us)
{
        int selector;
        unsigned char *status = us->iobuf;

        /* try device = master, then device = slave. */
        for (selector = 0xA0; selector <= 0xB0; selector += 0x10) {
                if (usbat_write(us, USBAT_ATA, USBAT_ATA_DEVICE, selector) !=
                                USB_STOR_XFER_GOOD)
                        return USB_STOR_TRANSPORT_ERROR;

                if (usbat_read(us, USBAT_ATA, USBAT_ATA_STATUS, status) != 
                                USB_STOR_XFER_GOOD)
                        return USB_STOR_TRANSPORT_ERROR;

                if (usbat_read(us, USBAT_ATA, USBAT_ATA_DEVICE, status) != 
                                USB_STOR_XFER_GOOD)
                        return USB_STOR_TRANSPORT_ERROR;

                if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 
                                USB_STOR_XFER_GOOD)
                        return USB_STOR_TRANSPORT_ERROR;

                if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) != 
                                USB_STOR_XFER_GOOD)
                        return USB_STOR_TRANSPORT_ERROR;

                if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_ME, 0x55) != 
                                USB_STOR_XFER_GOOD)
                        return USB_STOR_TRANSPORT_ERROR;

                if (usbat_write(us, USBAT_ATA, USBAT_ATA_LBA_HI, 0xAA) != 
                                USB_STOR_XFER_GOOD)
                        return USB_STOR_TRANSPORT_ERROR;

                if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 
                                USB_STOR_XFER_GOOD)
                        return USB_STOR_TRANSPORT_ERROR;

                if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 
                                USB_STOR_XFER_GOOD)
                        return USB_STOR_TRANSPORT_ERROR;
        }

        return USB_STOR_TRANSPORT_GOOD;
}

/*
 * Initialize the USBAT processor and the storage device
 */
static int init_usbat(struct us_data *us, int devicetype)
{
        int rc;
        struct usbat_info *info;
        unsigned char subcountH = USBAT_ATA_LBA_HI;
        unsigned char subcountL = USBAT_ATA_LBA_ME;
        unsigned char *status = us->iobuf;

        us->extra = kzalloc_obj(struct usbat_info, GFP_NOIO);
        if (!us->extra)
                return -ENOMEM;

        info = (struct usbat_info *) (us->extra);

        /* Enable peripheral control signals */
        rc = usbat_write_user_io(us,
                                 USBAT_UIO_OE1 | USBAT_UIO_OE0,
                                 USBAT_UIO_EPAD | USBAT_UIO_1);
        if (rc != USB_STOR_XFER_GOOD)
                return -EIO;

        usb_stor_dbg(us, "INIT 1\n");

        msleep(2000);

        rc = usbat_read_user_io(us, status);
        if (rc != USB_STOR_TRANSPORT_GOOD)
                return -EIO;

        usb_stor_dbg(us, "INIT 2\n");

        rc = usbat_read_user_io(us, status);
        if (rc != USB_STOR_XFER_GOOD)
                return -EIO;

        rc = usbat_read_user_io(us, status);
        if (rc != USB_STOR_XFER_GOOD)
                return -EIO;

        usb_stor_dbg(us, "INIT 3\n");

        rc = usbat_select_and_test_registers(us);
        if (rc != USB_STOR_TRANSPORT_GOOD)
                return -EIO;

        usb_stor_dbg(us, "INIT 4\n");

        rc = usbat_read_user_io(us, status);
        if (rc != USB_STOR_XFER_GOOD)
                return -EIO;

        usb_stor_dbg(us, "INIT 5\n");

        /* Enable peripheral control signals and card detect */
        rc = usbat_device_enable_cdt(us);
        if (rc != USB_STOR_TRANSPORT_GOOD)
                return -EIO;

        usb_stor_dbg(us, "INIT 6\n");

        rc = usbat_read_user_io(us, status);
        if (rc != USB_STOR_XFER_GOOD)
                return -EIO;

        usb_stor_dbg(us, "INIT 7\n");

        msleep(1400);

        rc = usbat_read_user_io(us, status);
        if (rc != USB_STOR_XFER_GOOD)
                return -EIO;

        usb_stor_dbg(us, "INIT 8\n");

        rc = usbat_select_and_test_registers(us);
        if (rc != USB_STOR_TRANSPORT_GOOD)
                return -EIO;

        usb_stor_dbg(us, "INIT 9\n");

        /* At this point, we need to detect which device we are using */
        if (usbat_set_transport(us, info, devicetype))
                return -EIO;

        usb_stor_dbg(us, "INIT 10\n");

        if (usbat_get_device_type(us) == USBAT_DEV_FLASH) { 
                subcountH = 0x02;
                subcountL = 0x00;
        }
        rc = usbat_set_shuttle_features(us, (USBAT_FEAT_ETEN | USBAT_FEAT_ET2 | USBAT_FEAT_ET1),
                                                                        0x00, 0x88, 0x08, subcountH, subcountL);
        if (rc != USB_STOR_XFER_GOOD)
                return -EIO;

        usb_stor_dbg(us, "INIT 11\n");

        return 0;
}

/*
 * Transport for the HP 8200e
 */
static int usbat_hp8200e_transport(struct scsi_cmnd *srb, struct us_data *us)
{
        int result;
        unsigned char *status = us->iobuf;
        unsigned char registers[32];
        unsigned char data[32];
        unsigned int len;
        int i;

        len = scsi_bufflen(srb);

        /*
         * Send A0 (ATA PACKET COMMAND).
         * Note: I guess we're never going to get any of the ATA
         * commands... just ATA Packet Commands.
         */

        registers[0] = USBAT_ATA_FEATURES;
        registers[1] = USBAT_ATA_SECCNT;
        registers[2] = USBAT_ATA_SECNUM;
        registers[3] = USBAT_ATA_LBA_ME;
        registers[4] = USBAT_ATA_LBA_HI;
        registers[5] = USBAT_ATA_DEVICE;
        registers[6] = USBAT_ATA_CMD;
        data[0] = 0x00;
        data[1] = 0x00;
        data[2] = 0x00;
        data[3] = len&0xFF;             /* (cylL) = expected length (L) */
        data[4] = (len>>8)&0xFF;        /* (cylH) = expected length (H) */
        data[5] = 0xB0;                 /* (device sel) = slave */
        data[6] = 0xA0;                 /* (command) = ATA PACKET COMMAND */

        for (i=7; i<19; i++) {
                registers[i] = 0x10;
                data[i] = (i-7 >= srb->cmd_len) ? 0 : srb->cmnd[i-7];
        }

        result = usbat_get_status(us, status);
        usb_stor_dbg(us, "Status = %02X\n", *status);
        if (result != USB_STOR_XFER_GOOD)
                return USB_STOR_TRANSPORT_ERROR;
        if (srb->cmnd[0] == TEST_UNIT_READY)
                transferred = 0;

        if (srb->sc_data_direction == DMA_TO_DEVICE) {

                result = usbat_hp8200e_rw_block_test(us, USBAT_ATA, 
                        registers, data, 19,
                        USBAT_ATA_DATA, USBAT_ATA_STATUS, 0xFD,
                        (USBAT_QUAL_FCQ | USBAT_QUAL_ALQ),
                        DMA_TO_DEVICE,
                        scsi_sglist(srb),
                        len, scsi_sg_count(srb), 10);

                if (result == USB_STOR_TRANSPORT_GOOD) {
                        transferred += len;
                        usb_stor_dbg(us, "Wrote %08X bytes\n", transferred);
                }

                return result;

        } else if (srb->cmnd[0] == READ_10 ||
                   srb->cmnd[0] == GPCMD_READ_CD) {

                return usbat_hp8200e_handle_read10(us, registers, data, srb);

        }

        if (len > 0xFFFF) {
                usb_stor_dbg(us, "Error: len = %08X... what do I do now?\n",
                             len);
                return USB_STOR_TRANSPORT_ERROR;
        }

        result = usbat_multiple_write(us, registers, data, 7);

        if (result != USB_STOR_TRANSPORT_GOOD)
                return result;

        /*
         * Write the 12-byte command header.
         *
         * If the command is BLANK then set the timer for 75 minutes.
         * Otherwise set it for 10 minutes.
         *
         * NOTE: THE 8200 DOCUMENTATION STATES THAT BLANKING A CDRW
         * AT SPEED 4 IS UNRELIABLE!!!
         */

        result = usbat_write_block(us, USBAT_ATA, srb->cmnd, 12,
                                   srb->cmnd[0] == GPCMD_BLANK ? 75 : 10, 0);

        if (result != USB_STOR_TRANSPORT_GOOD)
                return result;

        /* If there is response data to be read in then do it here. */

        if (len != 0 && (srb->sc_data_direction == DMA_FROM_DEVICE)) {

                /* How many bytes to read in? Check cylL register */

                if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_ME, status) != 
                        USB_STOR_XFER_GOOD) {
                        return USB_STOR_TRANSPORT_ERROR;
                }

                if (len > 0xFF) { /* need to read cylH also */
                        len = *status;
                        if (usbat_read(us, USBAT_ATA, USBAT_ATA_LBA_HI, status) !=
                                    USB_STOR_XFER_GOOD) {
                                return USB_STOR_TRANSPORT_ERROR;
                        }
                        len += ((unsigned int) *status)<<8;
                }
                else
                        len = *status;


                result = usbat_read_block(us, scsi_sglist(srb), len,
                                                           scsi_sg_count(srb));
        }

        return result;
}

/*
 * Transport for USBAT02-based CompactFlash and similar storage devices
 */
static int usbat_flash_transport(struct scsi_cmnd * srb, struct us_data *us)
{
        int rc;
        struct usbat_info *info = (struct usbat_info *) (us->extra);
        unsigned long block, blocks;
        unsigned char *ptr = us->iobuf;
        static const unsigned char inquiry_response[36] = {
                0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
        };

        if (srb->cmnd[0] == INQUIRY) {
                usb_stor_dbg(us, "INQUIRY - Returning bogus response\n");
                memcpy(ptr, inquiry_response, sizeof(inquiry_response));
                fill_inquiry_response(us, ptr, 36);
                return USB_STOR_TRANSPORT_GOOD;
        }

        if (srb->cmnd[0] == READ_CAPACITY) {
                rc = usbat_flash_check_media(us, info);
                if (rc != USB_STOR_TRANSPORT_GOOD)
                        return rc;

                rc = usbat_flash_get_sector_count(us, info);
                if (rc != USB_STOR_TRANSPORT_GOOD)
                        return rc;

                /* hard coded 512 byte sectors as per ATA spec */
                info->ssize = 0x200;
                usb_stor_dbg(us, "READ_CAPACITY: %ld sectors, %ld bytes per sector\n",
                             info->sectors, info->ssize);

                /*
                 * build the reply
                 * note: must return the sector number of the last sector,
                 * *not* the total number of sectors
                 */
                ((__be32 *) ptr)[0] = cpu_to_be32(info->sectors - 1);
                ((__be32 *) ptr)[1] = cpu_to_be32(info->ssize);
                usb_stor_set_xfer_buf(ptr, 8, srb);

                return USB_STOR_TRANSPORT_GOOD;
        }

        if (srb->cmnd[0] == MODE_SELECT_10) {
                usb_stor_dbg(us, "Gah! MODE_SELECT_10\n");
                return USB_STOR_TRANSPORT_ERROR;
        }

        if (srb->cmnd[0] == READ_10) {
                block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
                                ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));

                blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));

                usb_stor_dbg(us, "READ_10: read block 0x%04lx  count %ld\n",
                             block, blocks);
                return usbat_flash_read_data(us, info, block, blocks);
        }

        if (srb->cmnd[0] == READ_12) {
                /*
                 * I don't think we'll ever see a READ_12 but support it anyway
                 */
                block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
                        ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));

                blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
                         ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));

                usb_stor_dbg(us, "READ_12: read block 0x%04lx  count %ld\n",
                             block, blocks);
                return usbat_flash_read_data(us, info, block, blocks);
        }

        if (srb->cmnd[0] == WRITE_10) {
                block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
                        ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));

                blocks = ((u32)(srb->cmnd[7]) << 8) | ((u32)(srb->cmnd[8]));

                usb_stor_dbg(us, "WRITE_10: write block 0x%04lx  count %ld\n",
                             block, blocks);
                return usbat_flash_write_data(us, info, block, blocks);
        }

        if (srb->cmnd[0] == WRITE_12) {
                /*
                 * I don't think we'll ever see a WRITE_12 but support it anyway
                 */
                block = ((u32)(srb->cmnd[2]) << 24) | ((u32)(srb->cmnd[3]) << 16) |
                        ((u32)(srb->cmnd[4]) <<  8) | ((u32)(srb->cmnd[5]));

                blocks = ((u32)(srb->cmnd[6]) << 24) | ((u32)(srb->cmnd[7]) << 16) |
                         ((u32)(srb->cmnd[8]) <<  8) | ((u32)(srb->cmnd[9]));

                usb_stor_dbg(us, "WRITE_12: write block 0x%04lx  count %ld\n",
                             block, blocks);
                return usbat_flash_write_data(us, info, block, blocks);
        }


        if (srb->cmnd[0] == TEST_UNIT_READY) {
                usb_stor_dbg(us, "TEST_UNIT_READY\n");

                rc = usbat_flash_check_media(us, info);
                if (rc != USB_STOR_TRANSPORT_GOOD)
                        return rc;

                return usbat_check_status(us);
        }

        if (srb->cmnd[0] == REQUEST_SENSE) {
                usb_stor_dbg(us, "REQUEST_SENSE\n");

                memset(ptr, 0, 18);
                ptr[0] = 0xF0;
                ptr[2] = info->sense_key;
                ptr[7] = 11;
                ptr[12] = info->sense_asc;
                ptr[13] = info->sense_ascq;
                usb_stor_set_xfer_buf(ptr, 18, srb);

                return USB_STOR_TRANSPORT_GOOD;
        }

        if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
                /*
                 * sure.  whatever.  not like we can stop the user from popping
                 * the media out of the device (no locking doors, etc)
                 */
                return USB_STOR_TRANSPORT_GOOD;
        }

        usb_stor_dbg(us, "Gah! Unknown command: %d (0x%x)\n",
                     srb->cmnd[0], srb->cmnd[0]);
        info->sense_key = 0x05;
        info->sense_asc = 0x20;
        info->sense_ascq = 0x00;
        return USB_STOR_TRANSPORT_FAILED;
}

static int init_usbat_cd(struct us_data *us)
{
        return init_usbat(us, USBAT_DEV_HP8200);
}

static int init_usbat_flash(struct us_data *us)
{
        return init_usbat(us, USBAT_DEV_FLASH);
}

static struct scsi_host_template usbat_host_template;

static int usbat_probe(struct usb_interface *intf,
                         const struct usb_device_id *id)
{
        struct us_data *us;
        int result;

        result = usb_stor_probe1(&us, intf, id,
                        (id - usbat_usb_ids) + usbat_unusual_dev_list,
                        &usbat_host_template);
        if (result)
                return result;

        /*
         * The actual transport will be determined later by the
         * initialization routine; this is just a placeholder.
         */
        us->transport_name = "Shuttle USBAT";
        us->transport = usbat_flash_transport;
        us->transport_reset = usb_stor_CB_reset;
        us->max_lun = 0;

        result = usb_stor_probe2(us);
        return result;
}

static struct usb_driver usbat_driver = {
        .name =         DRV_NAME,
        .probe =        usbat_probe,
        .disconnect =   usb_stor_disconnect,
        .suspend =      usb_stor_suspend,
        .resume =       usb_stor_resume,
        .reset_resume = usb_stor_reset_resume,
        .pre_reset =    usb_stor_pre_reset,
        .post_reset =   usb_stor_post_reset,
        .id_table =     usbat_usb_ids,
        .soft_unbind =  1,
        .no_dynamic_id = 1,
};

module_usb_stor_driver(usbat_driver, usbat_host_template, DRV_NAME);