root/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
/*
 * This file is part of the Chelsio T4 Ethernet driver for Linux.
 *
 * Copyright (c) 2003-2016 Chelsio Communications, Inc. All rights reserved.
 *
 * This software is available to you under a choice of one of two
 * licenses.  You may choose to be licensed under the terms of the GNU
 * General Public License (GPL) Version 2, available from the file
 * COPYING in the main directory of this source tree, or the
 * OpenIB.org BSD license below:
 *
 *     Redistribution and use in source and binary forms, with or
 *     without modification, are permitted provided that the following
 *     conditions are met:
 *
 *      - Redistributions of source code must retain the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer.
 *
 *      - Redistributions in binary form must reproduce the above
 *        copyright notice, this list of conditions and the following
 *        disclaimer in the documentation and/or other materials
 *        provided with the distribution.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
 * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
 * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
 * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#include <linux/delay.h>
#include "cxgb4.h"
#include "t4_regs.h"
#include "t4_values.h"
#include "t4fw_api.h"
#include "t4fw_version.h"

/**
 *      t4_wait_op_done_val - wait until an operation is completed
 *      @adapter: the adapter performing the operation
 *      @reg: the register to check for completion
 *      @mask: a single-bit field within @reg that indicates completion
 *      @polarity: the value of the field when the operation is completed
 *      @attempts: number of check iterations
 *      @delay: delay in usecs between iterations
 *      @valp: where to store the value of the register at completion time
 *
 *      Wait until an operation is completed by checking a bit in a register
 *      up to @attempts times.  If @valp is not NULL the value of the register
 *      at the time it indicated completion is stored there.  Returns 0 if the
 *      operation completes and -EAGAIN otherwise.
 */
static int t4_wait_op_done_val(struct adapter *adapter, int reg, u32 mask,
                               int polarity, int attempts, int delay, u32 *valp)
{
        while (1) {
                u32 val = t4_read_reg(adapter, reg);

                if (!!(val & mask) == polarity) {
                        if (valp)
                                *valp = val;
                        return 0;
                }
                if (--attempts == 0)
                        return -EAGAIN;
                if (delay)
                        udelay(delay);
        }
}

static inline int t4_wait_op_done(struct adapter *adapter, int reg, u32 mask,
                                  int polarity, int attempts, int delay)
{
        return t4_wait_op_done_val(adapter, reg, mask, polarity, attempts,
                                   delay, NULL);
}

/**
 *      t4_set_reg_field - set a register field to a value
 *      @adapter: the adapter to program
 *      @addr: the register address
 *      @mask: specifies the portion of the register to modify
 *      @val: the new value for the register field
 *
 *      Sets a register field specified by the supplied mask to the
 *      given value.
 */
void t4_set_reg_field(struct adapter *adapter, unsigned int addr, u32 mask,
                      u32 val)
{
        u32 v = t4_read_reg(adapter, addr) & ~mask;

        t4_write_reg(adapter, addr, v | val);
        (void) t4_read_reg(adapter, addr);      /* flush */
}

/**
 *      t4_read_indirect - read indirectly addressed registers
 *      @adap: the adapter
 *      @addr_reg: register holding the indirect address
 *      @data_reg: register holding the value of the indirect register
 *      @vals: where the read register values are stored
 *      @nregs: how many indirect registers to read
 *      @start_idx: index of first indirect register to read
 *
 *      Reads registers that are accessed indirectly through an address/data
 *      register pair.
 */
void t4_read_indirect(struct adapter *adap, unsigned int addr_reg,
                             unsigned int data_reg, u32 *vals,
                             unsigned int nregs, unsigned int start_idx)
{
        while (nregs--) {
                t4_write_reg(adap, addr_reg, start_idx);
                *vals++ = t4_read_reg(adap, data_reg);
                start_idx++;
        }
}

/**
 *      t4_write_indirect - write indirectly addressed registers
 *      @adap: the adapter
 *      @addr_reg: register holding the indirect addresses
 *      @data_reg: register holding the value for the indirect registers
 *      @vals: values to write
 *      @nregs: how many indirect registers to write
 *      @start_idx: address of first indirect register to write
 *
 *      Writes a sequential block of registers that are accessed indirectly
 *      through an address/data register pair.
 */
void t4_write_indirect(struct adapter *adap, unsigned int addr_reg,
                       unsigned int data_reg, const u32 *vals,
                       unsigned int nregs, unsigned int start_idx)
{
        while (nregs--) {
                t4_write_reg(adap, addr_reg, start_idx++);
                t4_write_reg(adap, data_reg, *vals++);
        }
}

/*
 * Read a 32-bit PCI Configuration Space register via the PCI-E backdoor
 * mechanism.  This guarantees that we get the real value even if we're
 * operating within a Virtual Machine and the Hypervisor is trapping our
 * Configuration Space accesses.
 */
void t4_hw_pci_read_cfg4(struct adapter *adap, int reg, u32 *val)
{
        u32 req = FUNCTION_V(adap->pf) | REGISTER_V(reg);

        if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
                req |= ENABLE_F;
        else
                req |= T6_ENABLE_F;

        if (is_t4(adap->params.chip))
                req |= LOCALCFG_F;

        t4_write_reg(adap, PCIE_CFG_SPACE_REQ_A, req);
        *val = t4_read_reg(adap, PCIE_CFG_SPACE_DATA_A);

        /* Reset ENABLE to 0 so reads of PCIE_CFG_SPACE_DATA won't cause a
         * Configuration Space read.  (None of the other fields matter when
         * ENABLE is 0 so a simple register write is easier than a
         * read-modify-write via t4_set_reg_field().)
         */
        t4_write_reg(adap, PCIE_CFG_SPACE_REQ_A, 0);
}

/*
 * t4_report_fw_error - report firmware error
 * @adap: the adapter
 *
 * The adapter firmware can indicate error conditions to the host.
 * If the firmware has indicated an error, print out the reason for
 * the firmware error.
 */
static void t4_report_fw_error(struct adapter *adap)
{
        static const char *const reason[] = {
                "Crash",                        /* PCIE_FW_EVAL_CRASH */
                "During Device Preparation",    /* PCIE_FW_EVAL_PREP */
                "During Device Configuration",  /* PCIE_FW_EVAL_CONF */
                "During Device Initialization", /* PCIE_FW_EVAL_INIT */
                "Unexpected Event",             /* PCIE_FW_EVAL_UNEXPECTEDEVENT */
                "Insufficient Airflow",         /* PCIE_FW_EVAL_OVERHEAT */
                "Device Shutdown",              /* PCIE_FW_EVAL_DEVICESHUTDOWN */
                "Reserved",                     /* reserved */
        };
        u32 pcie_fw;

        pcie_fw = t4_read_reg(adap, PCIE_FW_A);
        if (pcie_fw & PCIE_FW_ERR_F) {
                dev_err(adap->pdev_dev, "Firmware reports adapter error: %s\n",
                        reason[PCIE_FW_EVAL_G(pcie_fw)]);
                adap->flags &= ~CXGB4_FW_OK;
        }
}

/*
 * Get the reply to a mailbox command and store it in @rpl in big-endian order.
 */
static void get_mbox_rpl(struct adapter *adap, __be64 *rpl, int nflit,
                         u32 mbox_addr)
{
        for ( ; nflit; nflit--, mbox_addr += 8)
                *rpl++ = cpu_to_be64(t4_read_reg64(adap, mbox_addr));
}

/*
 * Handle a FW assertion reported in a mailbox.
 */
static void fw_asrt(struct adapter *adap, u32 mbox_addr)
{
        struct fw_debug_cmd asrt;

        get_mbox_rpl(adap, (__be64 *)&asrt, sizeof(asrt) / 8, mbox_addr);
        dev_alert(adap->pdev_dev,
                  "FW assertion at %.16s:%u, val0 %#x, val1 %#x\n",
                  asrt.u.assert.filename_0_7, be32_to_cpu(asrt.u.assert.line),
                  be32_to_cpu(asrt.u.assert.x), be32_to_cpu(asrt.u.assert.y));
}

/**
 *      t4_record_mbox - record a Firmware Mailbox Command/Reply in the log
 *      @adapter: the adapter
 *      @cmd: the Firmware Mailbox Command or Reply
 *      @size: command length in bytes
 *      @access: the time (ms) needed to access the Firmware Mailbox
 *      @execute: the time (ms) the command spent being executed
 */
static void t4_record_mbox(struct adapter *adapter,
                           const __be64 *cmd, unsigned int size,
                           int access, int execute)
{
        struct mbox_cmd_log *log = adapter->mbox_log;
        struct mbox_cmd *entry;
        int i;

        entry = mbox_cmd_log_entry(log, log->cursor++);
        if (log->cursor == log->size)
                log->cursor = 0;

        for (i = 0; i < size / 8; i++)
                entry->cmd[i] = be64_to_cpu(cmd[i]);
        while (i < MBOX_LEN / 8)
                entry->cmd[i++] = 0;
        entry->timestamp = jiffies;
        entry->seqno = log->seqno++;
        entry->access = access;
        entry->execute = execute;
}

/**
 *      t4_wr_mbox_meat_timeout - send a command to FW through the given mailbox
 *      @adap: the adapter
 *      @mbox: index of the mailbox to use
 *      @cmd: the command to write
 *      @size: command length in bytes
 *      @rpl: where to optionally store the reply
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *      @timeout: time to wait for command to finish before timing out
 *
 *      Sends the given command to FW through the selected mailbox and waits
 *      for the FW to execute the command.  If @rpl is not %NULL it is used to
 *      store the FW's reply to the command.  The command and its optional
 *      reply are of the same length.  FW can take up to %FW_CMD_MAX_TIMEOUT ms
 *      to respond.  @sleep_ok determines whether we may sleep while awaiting
 *      the response.  If sleeping is allowed we use progressive backoff
 *      otherwise we spin.
 *
 *      The return value is 0 on success or a negative errno on failure.  A
 *      failure can happen either because we are not able to execute the
 *      command or FW executes it but signals an error.  In the latter case
 *      the return value is the error code indicated by FW (negated).
 */
int t4_wr_mbox_meat_timeout(struct adapter *adap, int mbox, const void *cmd,
                            int size, void *rpl, bool sleep_ok, int timeout)
{
        static const int delay[] = {
                1, 1, 3, 5, 10, 10, 20, 50, 100, 200
        };

        struct mbox_list entry;
        u16 access = 0;
        u16 execute = 0;
        u32 v;
        u64 res;
        int i, ms, delay_idx, ret;
        const __be64 *p = cmd;
        u32 data_reg = PF_REG(mbox, CIM_PF_MAILBOX_DATA_A);
        u32 ctl_reg = PF_REG(mbox, CIM_PF_MAILBOX_CTRL_A);
        __be64 cmd_rpl[MBOX_LEN / 8];
        u32 pcie_fw;

        if ((size & 15) || size > MBOX_LEN)
                return -EINVAL;

        /*
         * If the device is off-line, as in EEH, commands will time out.
         * Fail them early so we don't waste time waiting.
         */
        if (adap->pdev->error_state != pci_channel_io_normal)
                return -EIO;

        /* If we have a negative timeout, that implies that we can't sleep. */
        if (timeout < 0) {
                sleep_ok = false;
                timeout = -timeout;
        }

        /* Queue ourselves onto the mailbox access list.  When our entry is at
         * the front of the list, we have rights to access the mailbox.  So we
         * wait [for a while] till we're at the front [or bail out with an
         * EBUSY] ...
         */
        spin_lock_bh(&adap->mbox_lock);
        list_add_tail(&entry.list, &adap->mlist.list);
        spin_unlock_bh(&adap->mbox_lock);

        delay_idx = 0;
        ms = delay[0];

        for (i = 0; ; i += ms) {
                /* If we've waited too long, return a busy indication.  This
                 * really ought to be based on our initial position in the
                 * mailbox access list but this is a start.  We very rarely
                 * contend on access to the mailbox ...
                 */
                pcie_fw = t4_read_reg(adap, PCIE_FW_A);
                if (i > FW_CMD_MAX_TIMEOUT || (pcie_fw & PCIE_FW_ERR_F)) {
                        spin_lock_bh(&adap->mbox_lock);
                        list_del(&entry.list);
                        spin_unlock_bh(&adap->mbox_lock);
                        ret = (pcie_fw & PCIE_FW_ERR_F) ? -ENXIO : -EBUSY;
                        t4_record_mbox(adap, cmd, size, access, ret);
                        return ret;
                }

                /* If we're at the head, break out and start the mailbox
                 * protocol.
                 */
                if (list_first_entry(&adap->mlist.list, struct mbox_list,
                                     list) == &entry)
                        break;

                /* Delay for a bit before checking again ... */
                if (sleep_ok) {
                        ms = delay[delay_idx];  /* last element may repeat */
                        if (delay_idx < ARRAY_SIZE(delay) - 1)
                                delay_idx++;
                        msleep(ms);
                } else {
                        mdelay(ms);
                }
        }

        /* Loop trying to get ownership of the mailbox.  Return an error
         * if we can't gain ownership.
         */
        v = MBOWNER_G(t4_read_reg(adap, ctl_reg));
        for (i = 0; v == MBOX_OWNER_NONE && i < 3; i++)
                v = MBOWNER_G(t4_read_reg(adap, ctl_reg));
        if (v != MBOX_OWNER_DRV) {
                spin_lock_bh(&adap->mbox_lock);
                list_del(&entry.list);
                spin_unlock_bh(&adap->mbox_lock);
                ret = (v == MBOX_OWNER_FW) ? -EBUSY : -ETIMEDOUT;
                t4_record_mbox(adap, cmd, size, access, ret);
                return ret;
        }

        /* Copy in the new mailbox command and send it on its way ... */
        t4_record_mbox(adap, cmd, size, access, 0);
        for (i = 0; i < size; i += 8)
                t4_write_reg64(adap, data_reg + i, be64_to_cpu(*p++));

        t4_write_reg(adap, ctl_reg, MBMSGVALID_F | MBOWNER_V(MBOX_OWNER_FW));
        t4_read_reg(adap, ctl_reg);          /* flush write */

        delay_idx = 0;
        ms = delay[0];

        for (i = 0;
             !((pcie_fw = t4_read_reg(adap, PCIE_FW_A)) & PCIE_FW_ERR_F) &&
             i < timeout;
             i += ms) {
                if (sleep_ok) {
                        ms = delay[delay_idx];  /* last element may repeat */
                        if (delay_idx < ARRAY_SIZE(delay) - 1)
                                delay_idx++;
                        msleep(ms);
                } else
                        mdelay(ms);

                v = t4_read_reg(adap, ctl_reg);
                if (MBOWNER_G(v) == MBOX_OWNER_DRV) {
                        if (!(v & MBMSGVALID_F)) {
                                t4_write_reg(adap, ctl_reg, 0);
                                continue;
                        }

                        get_mbox_rpl(adap, cmd_rpl, MBOX_LEN / 8, data_reg);
                        res = be64_to_cpu(cmd_rpl[0]);

                        if (FW_CMD_OP_G(res >> 32) == FW_DEBUG_CMD) {
                                fw_asrt(adap, data_reg);
                                res = FW_CMD_RETVAL_V(EIO);
                        } else if (rpl) {
                                memcpy(rpl, cmd_rpl, size);
                        }

                        t4_write_reg(adap, ctl_reg, 0);

                        execute = i + ms;
                        t4_record_mbox(adap, cmd_rpl,
                                       MBOX_LEN, access, execute);
                        spin_lock_bh(&adap->mbox_lock);
                        list_del(&entry.list);
                        spin_unlock_bh(&adap->mbox_lock);
                        return -FW_CMD_RETVAL_G((int)res);
                }
        }

        ret = (pcie_fw & PCIE_FW_ERR_F) ? -ENXIO : -ETIMEDOUT;
        t4_record_mbox(adap, cmd, size, access, ret);
        dev_err(adap->pdev_dev, "command %#x in mailbox %d timed out\n",
                *(const u8 *)cmd, mbox);
        t4_report_fw_error(adap);
        spin_lock_bh(&adap->mbox_lock);
        list_del(&entry.list);
        spin_unlock_bh(&adap->mbox_lock);
        t4_fatal_err(adap);
        return ret;
}

int t4_wr_mbox_meat(struct adapter *adap, int mbox, const void *cmd, int size,
                    void *rpl, bool sleep_ok)
{
        return t4_wr_mbox_meat_timeout(adap, mbox, cmd, size, rpl, sleep_ok,
                                       FW_CMD_MAX_TIMEOUT);
}

static int t4_edc_err_read(struct adapter *adap, int idx)
{
        u32 edc_ecc_err_addr_reg;
        u32 rdata_reg;

        if (is_t4(adap->params.chip)) {
                CH_WARN(adap, "%s: T4 NOT supported.\n", __func__);
                return 0;
        }
        if (idx != 0 && idx != 1) {
                CH_WARN(adap, "%s: idx %d NOT supported.\n", __func__, idx);
                return 0;
        }

        edc_ecc_err_addr_reg = EDC_T5_REG(EDC_H_ECC_ERR_ADDR_A, idx);
        rdata_reg = EDC_T5_REG(EDC_H_BIST_STATUS_RDATA_A, idx);

        CH_WARN(adap,
                "edc%d err addr 0x%x: 0x%x.\n",
                idx, edc_ecc_err_addr_reg,
                t4_read_reg(adap, edc_ecc_err_addr_reg));
        CH_WARN(adap,
                "bist: 0x%x, status %llx %llx %llx %llx %llx %llx %llx %llx %llx.\n",
                rdata_reg,
                (unsigned long long)t4_read_reg64(adap, rdata_reg),
                (unsigned long long)t4_read_reg64(adap, rdata_reg + 8),
                (unsigned long long)t4_read_reg64(adap, rdata_reg + 16),
                (unsigned long long)t4_read_reg64(adap, rdata_reg + 24),
                (unsigned long long)t4_read_reg64(adap, rdata_reg + 32),
                (unsigned long long)t4_read_reg64(adap, rdata_reg + 40),
                (unsigned long long)t4_read_reg64(adap, rdata_reg + 48),
                (unsigned long long)t4_read_reg64(adap, rdata_reg + 56),
                (unsigned long long)t4_read_reg64(adap, rdata_reg + 64));

        return 0;
}

/**
 * t4_memory_rw_init - Get memory window relative offset, base, and size.
 * @adap: the adapter
 * @win: PCI-E Memory Window to use
 * @mtype: memory type: MEM_EDC0, MEM_EDC1, MEM_HMA or MEM_MC
 * @mem_off: memory relative offset with respect to @mtype.
 * @mem_base: configured memory base address.
 * @mem_aperture: configured memory window aperture.
 *
 * Get the configured memory window's relative offset, base, and size.
 */
int t4_memory_rw_init(struct adapter *adap, int win, int mtype, u32 *mem_off,
                      u32 *mem_base, u32 *mem_aperture)
{
        u32 edc_size, mc_size, mem_reg;

        /* Offset into the region of memory which is being accessed
         * MEM_EDC0 = 0
         * MEM_EDC1 = 1
         * MEM_MC   = 2 -- MEM_MC for chips with only 1 memory controller
         * MEM_MC1  = 3 -- for chips with 2 memory controllers (e.g. T5)
         * MEM_HMA  = 4
         */
        edc_size  = EDRAM0_SIZE_G(t4_read_reg(adap, MA_EDRAM0_BAR_A));
        if (mtype == MEM_HMA) {
                *mem_off = 2 * (edc_size * 1024 * 1024);
        } else if (mtype != MEM_MC1) {
                *mem_off = (mtype * (edc_size * 1024 * 1024));
        } else {
                mc_size = EXT_MEM0_SIZE_G(t4_read_reg(adap,
                                                      MA_EXT_MEMORY0_BAR_A));
                *mem_off = (MEM_MC0 * edc_size + mc_size) * 1024 * 1024;
        }

        /* Each PCI-E Memory Window is programmed with a window size -- or
         * "aperture" -- which controls the granularity of its mapping onto
         * adapter memory.  We need to grab that aperture in order to know
         * how to use the specified window.  The window is also programmed
         * with the base address of the Memory Window in BAR0's address
         * space.  For T4 this is an absolute PCI-E Bus Address.  For T5
         * the address is relative to BAR0.
         */
        mem_reg = t4_read_reg(adap,
                              PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A,
                                                  win));
        /* a dead adapter will return 0xffffffff for PIO reads */
        if (mem_reg == 0xffffffff)
                return -ENXIO;

        *mem_aperture = 1 << (WINDOW_G(mem_reg) + WINDOW_SHIFT_X);
        *mem_base = PCIEOFST_G(mem_reg) << PCIEOFST_SHIFT_X;
        if (is_t4(adap->params.chip))
                *mem_base -= adap->t4_bar0;

        return 0;
}

/**
 * t4_memory_update_win - Move memory window to specified address.
 * @adap: the adapter
 * @win: PCI-E Memory Window to use
 * @addr: location to move.
 *
 * Move memory window to specified address.
 */
void t4_memory_update_win(struct adapter *adap, int win, u32 addr)
{
        t4_write_reg(adap,
                     PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win),
                     addr);
        /* Read it back to ensure that changes propagate before we
         * attempt to use the new value.
         */
        t4_read_reg(adap,
                    PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_OFFSET_A, win));
}

/**
 * t4_memory_rw_residual - Read/Write residual data.
 * @adap: the adapter
 * @off: relative offset within residual to start read/write.
 * @addr: address within indicated memory type.
 * @buf: host memory buffer
 * @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
 *
 * Read/Write residual data less than 32-bits.
 */
void t4_memory_rw_residual(struct adapter *adap, u32 off, u32 addr, u8 *buf,
                           int dir)
{
        union {
                u32 word;
                char byte[4];
        } last;
        unsigned char *bp;
        int i;

        if (dir == T4_MEMORY_READ) {
                last.word = le32_to_cpu((__force __le32)
                                        t4_read_reg(adap, addr));
                for (bp = (unsigned char *)buf, i = off; i < 4; i++)
                        bp[i] = last.byte[i];
        } else {
                last.word = *buf;
                for (i = off; i < 4; i++)
                        last.byte[i] = 0;
                t4_write_reg(adap, addr,
                             (__force u32)cpu_to_le32(last.word));
        }
}

/**
 *      t4_memory_rw - read/write EDC 0, EDC 1 or MC via PCIE memory window
 *      @adap: the adapter
 *      @win: PCI-E Memory Window to use
 *      @mtype: memory type: MEM_EDC0, MEM_EDC1 or MEM_MC
 *      @addr: address within indicated memory type
 *      @len: amount of memory to transfer
 *      @hbuf: host memory buffer
 *      @dir: direction of transfer T4_MEMORY_READ (1) or T4_MEMORY_WRITE (0)
 *
 *      Reads/writes an [almost] arbitrary memory region in the firmware: the
 *      firmware memory address and host buffer must be aligned on 32-bit
 *      boundaries; the length may be arbitrary.  The memory is transferred as
 *      a raw byte sequence from/to the firmware's memory.  If this memory
 *      contains data structures which contain multi-byte integers, it's the
 *      caller's responsibility to perform appropriate byte order conversions.
 */
int t4_memory_rw(struct adapter *adap, int win, int mtype, u32 addr,
                 u32 len, void *hbuf, int dir)
{
        u32 pos, offset, resid, memoffset;
        u32 win_pf, mem_aperture, mem_base;
        u32 *buf;
        int ret;

        /* Argument sanity checks ...
         */
        if (addr & 0x3 || (uintptr_t)hbuf & 0x3)
                return -EINVAL;
        buf = (u32 *)hbuf;

        /* It's convenient to be able to handle lengths which aren't a
         * multiple of 32-bits because we often end up transferring files to
         * the firmware.  So we'll handle that by normalizing the length here
         * and then handling any residual transfer at the end.
         */
        resid = len & 0x3;
        len -= resid;

        ret = t4_memory_rw_init(adap, win, mtype, &memoffset, &mem_base,
                                &mem_aperture);
        if (ret)
                return ret;

        /* Determine the PCIE_MEM_ACCESS_OFFSET */
        addr = addr + memoffset;

        win_pf = is_t4(adap->params.chip) ? 0 : PFNUM_V(adap->pf);

        /* Calculate our initial PCI-E Memory Window Position and Offset into
         * that Window.
         */
        pos = addr & ~(mem_aperture - 1);
        offset = addr - pos;

        /* Set up initial PCI-E Memory Window to cover the start of our
         * transfer.
         */
        t4_memory_update_win(adap, win, pos | win_pf);

        /* Transfer data to/from the adapter as long as there's an integral
         * number of 32-bit transfers to complete.
         *
         * A note on Endianness issues:
         *
         * The "register" reads and writes below from/to the PCI-E Memory
         * Window invoke the standard adapter Big-Endian to PCI-E Link
         * Little-Endian "swizzel."  As a result, if we have the following
         * data in adapter memory:
         *
         *     Memory:  ... | b0 | b1 | b2 | b3 | ...
         *     Address:      i+0  i+1  i+2  i+3
         *
         * Then a read of the adapter memory via the PCI-E Memory Window
         * will yield:
         *
         *     x = readl(i)
         *         31                  0
         *         [ b3 | b2 | b1 | b0 ]
         *
         * If this value is stored into local memory on a Little-Endian system
         * it will show up correctly in local memory as:
         *
         *     ( ..., b0, b1, b2, b3, ... )
         *
         * But on a Big-Endian system, the store will show up in memory
         * incorrectly swizzled as:
         *
         *     ( ..., b3, b2, b1, b0, ... )
         *
         * So we need to account for this in the reads and writes to the
         * PCI-E Memory Window below by undoing the register read/write
         * swizzels.
         */
        while (len > 0) {
                if (dir == T4_MEMORY_READ)
                        *buf++ = le32_to_cpu((__force __le32)t4_read_reg(adap,
                                                mem_base + offset));
                else
                        t4_write_reg(adap, mem_base + offset,
                                     (__force u32)cpu_to_le32(*buf++));
                offset += sizeof(__be32);
                len -= sizeof(__be32);

                /* If we've reached the end of our current window aperture,
                 * move the PCI-E Memory Window on to the next.  Note that
                 * doing this here after "len" may be 0 allows us to set up
                 * the PCI-E Memory Window for a possible final residual
                 * transfer below ...
                 */
                if (offset == mem_aperture) {
                        pos += mem_aperture;
                        offset = 0;
                        t4_memory_update_win(adap, win, pos | win_pf);
                }
        }

        /* If the original transfer had a length which wasn't a multiple of
         * 32-bits, now's where we need to finish off the transfer of the
         * residual amount.  The PCI-E Memory Window has already been moved
         * above (if necessary) to cover this final transfer.
         */
        if (resid)
                t4_memory_rw_residual(adap, resid, mem_base + offset,
                                      (u8 *)buf, dir);

        return 0;
}

/* Return the specified PCI-E Configuration Space register from our Physical
 * Function.  We try first via a Firmware LDST Command since we prefer to let
 * the firmware own all of these registers, but if that fails we go for it
 * directly ourselves.
 */
u32 t4_read_pcie_cfg4(struct adapter *adap, int reg)
{
        u32 val, ldst_addrspace;

        /* If fw_attach != 0, construct and send the Firmware LDST Command to
         * retrieve the specified PCI-E Configuration Space register.
         */
        struct fw_ldst_cmd ldst_cmd;
        int ret;

        memset(&ldst_cmd, 0, sizeof(ldst_cmd));
        ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_FUNC_PCIE);
        ldst_cmd.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
                                               FW_CMD_REQUEST_F |
                                               FW_CMD_READ_F |
                                               ldst_addrspace);
        ldst_cmd.cycles_to_len16 = cpu_to_be32(FW_LEN16(ldst_cmd));
        ldst_cmd.u.pcie.select_naccess = FW_LDST_CMD_NACCESS_V(1);
        ldst_cmd.u.pcie.ctrl_to_fn =
                (FW_LDST_CMD_LC_F | FW_LDST_CMD_FN_V(adap->pf));
        ldst_cmd.u.pcie.r = reg;

        /* If the LDST Command succeeds, return the result, otherwise
         * fall through to reading it directly ourselves ...
         */
        ret = t4_wr_mbox(adap, adap->mbox, &ldst_cmd, sizeof(ldst_cmd),
                         &ldst_cmd);
        if (ret == 0)
                val = be32_to_cpu(ldst_cmd.u.pcie.data[0]);
        else
                /* Read the desired Configuration Space register via the PCI-E
                 * Backdoor mechanism.
                 */
                t4_hw_pci_read_cfg4(adap, reg, &val);
        return val;
}

/* Get the window based on base passed to it.
 * Window aperture is currently unhandled, but there is no use case for it
 * right now
 */
static u32 t4_get_window(struct adapter *adap, u32 pci_base, u64 pci_mask,
                         u32 memwin_base)
{
        u32 ret;

        if (is_t4(adap->params.chip)) {
                u32 bar0;

                /* Truncation intentional: we only read the bottom 32-bits of
                 * the 64-bit BAR0/BAR1 ...  We use the hardware backdoor
                 * mechanism to read BAR0 instead of using
                 * pci_resource_start() because we could be operating from
                 * within a Virtual Machine which is trapping our accesses to
                 * our Configuration Space and we need to set up the PCI-E
                 * Memory Window decoders with the actual addresses which will
                 * be coming across the PCI-E link.
                 */
                bar0 = t4_read_pcie_cfg4(adap, pci_base);
                bar0 &= pci_mask;
                adap->t4_bar0 = bar0;

                ret = bar0 + memwin_base;
        } else {
                /* For T5, only relative offset inside the PCIe BAR is passed */
                ret = memwin_base;
        }
        return ret;
}

/* Get the default utility window (win0) used by everyone */
u32 t4_get_util_window(struct adapter *adap)
{
        return t4_get_window(adap, PCI_BASE_ADDRESS_0,
                             PCI_BASE_ADDRESS_MEM_MASK, MEMWIN0_BASE);
}

/* Set up memory window for accessing adapter memory ranges.  (Read
 * back MA register to ensure that changes propagate before we attempt
 * to use the new values.)
 */
void t4_setup_memwin(struct adapter *adap, u32 memwin_base, u32 window)
{
        t4_write_reg(adap,
                     PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, window),
                     memwin_base | BIR_V(0) |
                     WINDOW_V(ilog2(MEMWIN0_APERTURE) - WINDOW_SHIFT_X));
        t4_read_reg(adap,
                    PCIE_MEM_ACCESS_REG(PCIE_MEM_ACCESS_BASE_WIN_A, window));
}

/**
 *      t4_get_regs_len - return the size of the chips register set
 *      @adapter: the adapter
 *
 *      Returns the size of the chip's BAR0 register space.
 */
unsigned int t4_get_regs_len(struct adapter *adapter)
{
        unsigned int chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);

        switch (chip_version) {
        case CHELSIO_T4:
                return T4_REGMAP_SIZE;

        case CHELSIO_T5:
        case CHELSIO_T6:
                return T5_REGMAP_SIZE;
        }

        dev_err(adapter->pdev_dev,
                "Unsupported chip version %d\n", chip_version);
        return 0;
}

/**
 *      t4_get_regs - read chip registers into provided buffer
 *      @adap: the adapter
 *      @buf: register buffer
 *      @buf_size: size (in bytes) of register buffer
 *
 *      If the provided register buffer isn't large enough for the chip's
 *      full register range, the register dump will be truncated to the
 *      register buffer's size.
 */
void t4_get_regs(struct adapter *adap, void *buf, size_t buf_size)
{
        static const unsigned int t4_reg_ranges[] = {
                0x1008, 0x1108,
                0x1180, 0x1184,
                0x1190, 0x1194,
                0x11a0, 0x11a4,
                0x11b0, 0x11b4,
                0x11fc, 0x123c,
                0x1300, 0x173c,
                0x1800, 0x18fc,
                0x3000, 0x30d8,
                0x30e0, 0x30e4,
                0x30ec, 0x5910,
                0x5920, 0x5924,
                0x5960, 0x5960,
                0x5968, 0x5968,
                0x5970, 0x5970,
                0x5978, 0x5978,
                0x5980, 0x5980,
                0x5988, 0x5988,
                0x5990, 0x5990,
                0x5998, 0x5998,
                0x59a0, 0x59d4,
                0x5a00, 0x5ae0,
                0x5ae8, 0x5ae8,
                0x5af0, 0x5af0,
                0x5af8, 0x5af8,
                0x6000, 0x6098,
                0x6100, 0x6150,
                0x6200, 0x6208,
                0x6240, 0x6248,
                0x6280, 0x62b0,
                0x62c0, 0x6338,
                0x6370, 0x638c,
                0x6400, 0x643c,
                0x6500, 0x6524,
                0x6a00, 0x6a04,
                0x6a14, 0x6a38,
                0x6a60, 0x6a70,
                0x6a78, 0x6a78,
                0x6b00, 0x6b0c,
                0x6b1c, 0x6b84,
                0x6bf0, 0x6bf8,
                0x6c00, 0x6c0c,
                0x6c1c, 0x6c84,
                0x6cf0, 0x6cf8,
                0x6d00, 0x6d0c,
                0x6d1c, 0x6d84,
                0x6df0, 0x6df8,
                0x6e00, 0x6e0c,
                0x6e1c, 0x6e84,
                0x6ef0, 0x6ef8,
                0x6f00, 0x6f0c,
                0x6f1c, 0x6f84,
                0x6ff0, 0x6ff8,
                0x7000, 0x700c,
                0x701c, 0x7084,
                0x70f0, 0x70f8,
                0x7100, 0x710c,
                0x711c, 0x7184,
                0x71f0, 0x71f8,
                0x7200, 0x720c,
                0x721c, 0x7284,
                0x72f0, 0x72f8,
                0x7300, 0x730c,
                0x731c, 0x7384,
                0x73f0, 0x73f8,
                0x7400, 0x7450,
                0x7500, 0x7530,
                0x7600, 0x760c,
                0x7614, 0x761c,
                0x7680, 0x76cc,
                0x7700, 0x7798,
                0x77c0, 0x77fc,
                0x7900, 0x79fc,
                0x7b00, 0x7b58,
                0x7b60, 0x7b84,
                0x7b8c, 0x7c38,
                0x7d00, 0x7d38,
                0x7d40, 0x7d80,
                0x7d8c, 0x7ddc,
                0x7de4, 0x7e04,
                0x7e10, 0x7e1c,
                0x7e24, 0x7e38,
                0x7e40, 0x7e44,
                0x7e4c, 0x7e78,
                0x7e80, 0x7ea4,
                0x7eac, 0x7edc,
                0x7ee8, 0x7efc,
                0x8dc0, 0x8e04,
                0x8e10, 0x8e1c,
                0x8e30, 0x8e78,
                0x8ea0, 0x8eb8,
                0x8ec0, 0x8f6c,
                0x8fc0, 0x9008,
                0x9010, 0x9058,
                0x9060, 0x9060,
                0x9068, 0x9074,
                0x90fc, 0x90fc,
                0x9400, 0x9408,
                0x9410, 0x9458,
                0x9600, 0x9600,
                0x9608, 0x9638,
                0x9640, 0x96bc,
                0x9800, 0x9808,
                0x9820, 0x983c,
                0x9850, 0x9864,
                0x9c00, 0x9c6c,
                0x9c80, 0x9cec,
                0x9d00, 0x9d6c,
                0x9d80, 0x9dec,
                0x9e00, 0x9e6c,
                0x9e80, 0x9eec,
                0x9f00, 0x9f6c,
                0x9f80, 0x9fec,
                0xd004, 0xd004,
                0xd010, 0xd03c,
                0xdfc0, 0xdfe0,
                0xe000, 0xea7c,
                0xf000, 0x11110,
                0x11118, 0x11190,
                0x19040, 0x1906c,
                0x19078, 0x19080,
                0x1908c, 0x190e4,
                0x190f0, 0x190f8,
                0x19100, 0x19110,
                0x19120, 0x19124,
                0x19150, 0x19194,
                0x1919c, 0x191b0,
                0x191d0, 0x191e8,
                0x19238, 0x1924c,
                0x193f8, 0x1943c,
                0x1944c, 0x19474,
                0x19490, 0x194e0,
                0x194f0, 0x194f8,
                0x19800, 0x19c08,
                0x19c10, 0x19c90,
                0x19ca0, 0x19ce4,
                0x19cf0, 0x19d40,
                0x19d50, 0x19d94,
                0x19da0, 0x19de8,
                0x19df0, 0x19e40,
                0x19e50, 0x19e90,
                0x19ea0, 0x19f4c,
                0x1a000, 0x1a004,
                0x1a010, 0x1a06c,
                0x1a0b0, 0x1a0e4,
                0x1a0ec, 0x1a0f4,
                0x1a100, 0x1a108,
                0x1a114, 0x1a120,
                0x1a128, 0x1a130,
                0x1a138, 0x1a138,
                0x1a190, 0x1a1c4,
                0x1a1fc, 0x1a1fc,
                0x1e040, 0x1e04c,
                0x1e284, 0x1e28c,
                0x1e2c0, 0x1e2c0,
                0x1e2e0, 0x1e2e0,
                0x1e300, 0x1e384,
                0x1e3c0, 0x1e3c8,
                0x1e440, 0x1e44c,
                0x1e684, 0x1e68c,
                0x1e6c0, 0x1e6c0,
                0x1e6e0, 0x1e6e0,
                0x1e700, 0x1e784,
                0x1e7c0, 0x1e7c8,
                0x1e840, 0x1e84c,
                0x1ea84, 0x1ea8c,
                0x1eac0, 0x1eac0,
                0x1eae0, 0x1eae0,
                0x1eb00, 0x1eb84,
                0x1ebc0, 0x1ebc8,
                0x1ec40, 0x1ec4c,
                0x1ee84, 0x1ee8c,
                0x1eec0, 0x1eec0,
                0x1eee0, 0x1eee0,
                0x1ef00, 0x1ef84,
                0x1efc0, 0x1efc8,
                0x1f040, 0x1f04c,
                0x1f284, 0x1f28c,
                0x1f2c0, 0x1f2c0,
                0x1f2e0, 0x1f2e0,
                0x1f300, 0x1f384,
                0x1f3c0, 0x1f3c8,
                0x1f440, 0x1f44c,
                0x1f684, 0x1f68c,
                0x1f6c0, 0x1f6c0,
                0x1f6e0, 0x1f6e0,
                0x1f700, 0x1f784,
                0x1f7c0, 0x1f7c8,
                0x1f840, 0x1f84c,
                0x1fa84, 0x1fa8c,
                0x1fac0, 0x1fac0,
                0x1fae0, 0x1fae0,
                0x1fb00, 0x1fb84,
                0x1fbc0, 0x1fbc8,
                0x1fc40, 0x1fc4c,
                0x1fe84, 0x1fe8c,
                0x1fec0, 0x1fec0,
                0x1fee0, 0x1fee0,
                0x1ff00, 0x1ff84,
                0x1ffc0, 0x1ffc8,
                0x20000, 0x2002c,
                0x20100, 0x2013c,
                0x20190, 0x201a0,
                0x201a8, 0x201b8,
                0x201c4, 0x201c8,
                0x20200, 0x20318,
                0x20400, 0x204b4,
                0x204c0, 0x20528,
                0x20540, 0x20614,
                0x21000, 0x21040,
                0x2104c, 0x21060,
                0x210c0, 0x210ec,
                0x21200, 0x21268,
                0x21270, 0x21284,
                0x212fc, 0x21388,
                0x21400, 0x21404,
                0x21500, 0x21500,
                0x21510, 0x21518,
                0x2152c, 0x21530,
                0x2153c, 0x2153c,
                0x21550, 0x21554,
                0x21600, 0x21600,
                0x21608, 0x2161c,
                0x21624, 0x21628,
                0x21630, 0x21634,
                0x2163c, 0x2163c,
                0x21700, 0x2171c,
                0x21780, 0x2178c,
                0x21800, 0x21818,
                0x21820, 0x21828,
                0x21830, 0x21848,
                0x21850, 0x21854,
                0x21860, 0x21868,
                0x21870, 0x21870,
                0x21878, 0x21898,
                0x218a0, 0x218a8,
                0x218b0, 0x218c8,
                0x218d0, 0x218d4,
                0x218e0, 0x218e8,
                0x218f0, 0x218f0,
                0x218f8, 0x21a18,
                0x21a20, 0x21a28,
                0x21a30, 0x21a48,
                0x21a50, 0x21a54,
                0x21a60, 0x21a68,
                0x21a70, 0x21a70,
                0x21a78, 0x21a98,
                0x21aa0, 0x21aa8,
                0x21ab0, 0x21ac8,
                0x21ad0, 0x21ad4,
                0x21ae0, 0x21ae8,
                0x21af0, 0x21af0,
                0x21af8, 0x21c18,
                0x21c20, 0x21c20,
                0x21c28, 0x21c30,
                0x21c38, 0x21c38,
                0x21c80, 0x21c98,
                0x21ca0, 0x21ca8,
                0x21cb0, 0x21cc8,
                0x21cd0, 0x21cd4,
                0x21ce0, 0x21ce8,
                0x21cf0, 0x21cf0,
                0x21cf8, 0x21d7c,
                0x21e00, 0x21e04,
                0x22000, 0x2202c,
                0x22100, 0x2213c,
                0x22190, 0x221a0,
                0x221a8, 0x221b8,
                0x221c4, 0x221c8,
                0x22200, 0x22318,
                0x22400, 0x224b4,
                0x224c0, 0x22528,
                0x22540, 0x22614,
                0x23000, 0x23040,
                0x2304c, 0x23060,
                0x230c0, 0x230ec,
                0x23200, 0x23268,
                0x23270, 0x23284,
                0x232fc, 0x23388,
                0x23400, 0x23404,
                0x23500, 0x23500,
                0x23510, 0x23518,
                0x2352c, 0x23530,
                0x2353c, 0x2353c,
                0x23550, 0x23554,
                0x23600, 0x23600,
                0x23608, 0x2361c,
                0x23624, 0x23628,
                0x23630, 0x23634,
                0x2363c, 0x2363c,
                0x23700, 0x2371c,
                0x23780, 0x2378c,
                0x23800, 0x23818,
                0x23820, 0x23828,
                0x23830, 0x23848,
                0x23850, 0x23854,
                0x23860, 0x23868,
                0x23870, 0x23870,
                0x23878, 0x23898,
                0x238a0, 0x238a8,
                0x238b0, 0x238c8,
                0x238d0, 0x238d4,
                0x238e0, 0x238e8,
                0x238f0, 0x238f0,
                0x238f8, 0x23a18,
                0x23a20, 0x23a28,
                0x23a30, 0x23a48,
                0x23a50, 0x23a54,
                0x23a60, 0x23a68,
                0x23a70, 0x23a70,
                0x23a78, 0x23a98,
                0x23aa0, 0x23aa8,
                0x23ab0, 0x23ac8,
                0x23ad0, 0x23ad4,
                0x23ae0, 0x23ae8,
                0x23af0, 0x23af0,
                0x23af8, 0x23c18,
                0x23c20, 0x23c20,
                0x23c28, 0x23c30,
                0x23c38, 0x23c38,
                0x23c80, 0x23c98,
                0x23ca0, 0x23ca8,
                0x23cb0, 0x23cc8,
                0x23cd0, 0x23cd4,
                0x23ce0, 0x23ce8,
                0x23cf0, 0x23cf0,
                0x23cf8, 0x23d7c,
                0x23e00, 0x23e04,
                0x24000, 0x2402c,
                0x24100, 0x2413c,
                0x24190, 0x241a0,
                0x241a8, 0x241b8,
                0x241c4, 0x241c8,
                0x24200, 0x24318,
                0x24400, 0x244b4,
                0x244c0, 0x24528,
                0x24540, 0x24614,
                0x25000, 0x25040,
                0x2504c, 0x25060,
                0x250c0, 0x250ec,
                0x25200, 0x25268,
                0x25270, 0x25284,
                0x252fc, 0x25388,
                0x25400, 0x25404,
                0x25500, 0x25500,
                0x25510, 0x25518,
                0x2552c, 0x25530,
                0x2553c, 0x2553c,
                0x25550, 0x25554,
                0x25600, 0x25600,
                0x25608, 0x2561c,
                0x25624, 0x25628,
                0x25630, 0x25634,
                0x2563c, 0x2563c,
                0x25700, 0x2571c,
                0x25780, 0x2578c,
                0x25800, 0x25818,
                0x25820, 0x25828,
                0x25830, 0x25848,
                0x25850, 0x25854,
                0x25860, 0x25868,
                0x25870, 0x25870,
                0x25878, 0x25898,
                0x258a0, 0x258a8,
                0x258b0, 0x258c8,
                0x258d0, 0x258d4,
                0x258e0, 0x258e8,
                0x258f0, 0x258f0,
                0x258f8, 0x25a18,
                0x25a20, 0x25a28,
                0x25a30, 0x25a48,
                0x25a50, 0x25a54,
                0x25a60, 0x25a68,
                0x25a70, 0x25a70,
                0x25a78, 0x25a98,
                0x25aa0, 0x25aa8,
                0x25ab0, 0x25ac8,
                0x25ad0, 0x25ad4,
                0x25ae0, 0x25ae8,
                0x25af0, 0x25af0,
                0x25af8, 0x25c18,
                0x25c20, 0x25c20,
                0x25c28, 0x25c30,
                0x25c38, 0x25c38,
                0x25c80, 0x25c98,
                0x25ca0, 0x25ca8,
                0x25cb0, 0x25cc8,
                0x25cd0, 0x25cd4,
                0x25ce0, 0x25ce8,
                0x25cf0, 0x25cf0,
                0x25cf8, 0x25d7c,
                0x25e00, 0x25e04,
                0x26000, 0x2602c,
                0x26100, 0x2613c,
                0x26190, 0x261a0,
                0x261a8, 0x261b8,
                0x261c4, 0x261c8,
                0x26200, 0x26318,
                0x26400, 0x264b4,
                0x264c0, 0x26528,
                0x26540, 0x26614,
                0x27000, 0x27040,
                0x2704c, 0x27060,
                0x270c0, 0x270ec,
                0x27200, 0x27268,
                0x27270, 0x27284,
                0x272fc, 0x27388,
                0x27400, 0x27404,
                0x27500, 0x27500,
                0x27510, 0x27518,
                0x2752c, 0x27530,
                0x2753c, 0x2753c,
                0x27550, 0x27554,
                0x27600, 0x27600,
                0x27608, 0x2761c,
                0x27624, 0x27628,
                0x27630, 0x27634,
                0x2763c, 0x2763c,
                0x27700, 0x2771c,
                0x27780, 0x2778c,
                0x27800, 0x27818,
                0x27820, 0x27828,
                0x27830, 0x27848,
                0x27850, 0x27854,
                0x27860, 0x27868,
                0x27870, 0x27870,
                0x27878, 0x27898,
                0x278a0, 0x278a8,
                0x278b0, 0x278c8,
                0x278d0, 0x278d4,
                0x278e0, 0x278e8,
                0x278f0, 0x278f0,
                0x278f8, 0x27a18,
                0x27a20, 0x27a28,
                0x27a30, 0x27a48,
                0x27a50, 0x27a54,
                0x27a60, 0x27a68,
                0x27a70, 0x27a70,
                0x27a78, 0x27a98,
                0x27aa0, 0x27aa8,
                0x27ab0, 0x27ac8,
                0x27ad0, 0x27ad4,
                0x27ae0, 0x27ae8,
                0x27af0, 0x27af0,
                0x27af8, 0x27c18,
                0x27c20, 0x27c20,
                0x27c28, 0x27c30,
                0x27c38, 0x27c38,
                0x27c80, 0x27c98,
                0x27ca0, 0x27ca8,
                0x27cb0, 0x27cc8,
                0x27cd0, 0x27cd4,
                0x27ce0, 0x27ce8,
                0x27cf0, 0x27cf0,
                0x27cf8, 0x27d7c,
                0x27e00, 0x27e04,
        };

        static const unsigned int t5_reg_ranges[] = {
                0x1008, 0x10c0,
                0x10cc, 0x10f8,
                0x1100, 0x1100,
                0x110c, 0x1148,
                0x1180, 0x1184,
                0x1190, 0x1194,
                0x11a0, 0x11a4,
                0x11b0, 0x11b4,
                0x11fc, 0x123c,
                0x1280, 0x173c,
                0x1800, 0x18fc,
                0x3000, 0x3028,
                0x3060, 0x30b0,
                0x30b8, 0x30d8,
                0x30e0, 0x30fc,
                0x3140, 0x357c,
                0x35a8, 0x35cc,
                0x35ec, 0x35ec,
                0x3600, 0x5624,
                0x56cc, 0x56ec,
                0x56f4, 0x5720,
                0x5728, 0x575c,
                0x580c, 0x5814,
                0x5890, 0x589c,
                0x58a4, 0x58ac,
                0x58b8, 0x58bc,
                0x5940, 0x59c8,
                0x59d0, 0x59dc,
                0x59fc, 0x5a18,
                0x5a60, 0x5a70,
                0x5a80, 0x5a9c,
                0x5b94, 0x5bfc,
                0x6000, 0x6020,
                0x6028, 0x6040,
                0x6058, 0x609c,
                0x60a8, 0x614c,
                0x7700, 0x7798,
                0x77c0, 0x78fc,
                0x7b00, 0x7b58,
                0x7b60, 0x7b84,
                0x7b8c, 0x7c54,
                0x7d00, 0x7d38,
                0x7d40, 0x7d80,
                0x7d8c, 0x7ddc,
                0x7de4, 0x7e04,
                0x7e10, 0x7e1c,
                0x7e24, 0x7e38,
                0x7e40, 0x7e44,
                0x7e4c, 0x7e78,
                0x7e80, 0x7edc,
                0x7ee8, 0x7efc,
                0x8dc0, 0x8de0,
                0x8df8, 0x8e04,
                0x8e10, 0x8e84,
                0x8ea0, 0x8f84,
                0x8fc0, 0x9058,
                0x9060, 0x9060,
                0x9068, 0x90f8,
                0x9400, 0x9408,
                0x9410, 0x9470,
                0x9600, 0x9600,
                0x9608, 0x9638,
                0x9640, 0x96f4,
                0x9800, 0x9808,
                0x9810, 0x9864,
                0x9c00, 0x9c6c,
                0x9c80, 0x9cec,
                0x9d00, 0x9d6c,
                0x9d80, 0x9dec,
                0x9e00, 0x9e6c,
                0x9e80, 0x9eec,
                0x9f00, 0x9f6c,
                0x9f80, 0xa020,
                0xd000, 0xd004,
                0xd010, 0xd03c,
                0xdfc0, 0xdfe0,
                0xe000, 0x1106c,
                0x11074, 0x11088,
                0x1109c, 0x1117c,
                0x11190, 0x11204,
                0x19040, 0x1906c,
                0x19078, 0x19080,
                0x1908c, 0x190e8,
                0x190f0, 0x190f8,
                0x19100, 0x19110,
                0x19120, 0x19124,
                0x19150, 0x19194,
                0x1919c, 0x191b0,
                0x191d0, 0x191e8,
                0x19238, 0x19290,
                0x193f8, 0x19428,
                0x19430, 0x19444,
                0x1944c, 0x1946c,
                0x19474, 0x19474,
                0x19490, 0x194cc,
                0x194f0, 0x194f8,
                0x19c00, 0x19c08,
                0x19c10, 0x19c60,
                0x19c94, 0x19ce4,
                0x19cf0, 0x19d40,
                0x19d50, 0x19d94,
                0x19da0, 0x19de8,
                0x19df0, 0x19e10,
                0x19e50, 0x19e90,
                0x19ea0, 0x19f24,
                0x19f34, 0x19f34,
                0x19f40, 0x19f50,
                0x19f90, 0x19fb4,
                0x19fc4, 0x19fe4,
                0x1a000, 0x1a004,
                0x1a010, 0x1a06c,
                0x1a0b0, 0x1a0e4,
                0x1a0ec, 0x1a0f8,
                0x1a100, 0x1a108,
                0x1a114, 0x1a130,
                0x1a138, 0x1a1c4,
                0x1a1fc, 0x1a1fc,
                0x1e008, 0x1e00c,
                0x1e040, 0x1e044,
                0x1e04c, 0x1e04c,
                0x1e284, 0x1e290,
                0x1e2c0, 0x1e2c0,
                0x1e2e0, 0x1e2e0,
                0x1e300, 0x1e384,
                0x1e3c0, 0x1e3c8,
                0x1e408, 0x1e40c,
                0x1e440, 0x1e444,
                0x1e44c, 0x1e44c,
                0x1e684, 0x1e690,
                0x1e6c0, 0x1e6c0,
                0x1e6e0, 0x1e6e0,
                0x1e700, 0x1e784,
                0x1e7c0, 0x1e7c8,
                0x1e808, 0x1e80c,
                0x1e840, 0x1e844,
                0x1e84c, 0x1e84c,
                0x1ea84, 0x1ea90,
                0x1eac0, 0x1eac0,
                0x1eae0, 0x1eae0,
                0x1eb00, 0x1eb84,
                0x1ebc0, 0x1ebc8,
                0x1ec08, 0x1ec0c,
                0x1ec40, 0x1ec44,
                0x1ec4c, 0x1ec4c,
                0x1ee84, 0x1ee90,
                0x1eec0, 0x1eec0,
                0x1eee0, 0x1eee0,
                0x1ef00, 0x1ef84,
                0x1efc0, 0x1efc8,
                0x1f008, 0x1f00c,
                0x1f040, 0x1f044,
                0x1f04c, 0x1f04c,
                0x1f284, 0x1f290,
                0x1f2c0, 0x1f2c0,
                0x1f2e0, 0x1f2e0,
                0x1f300, 0x1f384,
                0x1f3c0, 0x1f3c8,
                0x1f408, 0x1f40c,
                0x1f440, 0x1f444,
                0x1f44c, 0x1f44c,
                0x1f684, 0x1f690,
                0x1f6c0, 0x1f6c0,
                0x1f6e0, 0x1f6e0,
                0x1f700, 0x1f784,
                0x1f7c0, 0x1f7c8,
                0x1f808, 0x1f80c,
                0x1f840, 0x1f844,
                0x1f84c, 0x1f84c,
                0x1fa84, 0x1fa90,
                0x1fac0, 0x1fac0,
                0x1fae0, 0x1fae0,
                0x1fb00, 0x1fb84,
                0x1fbc0, 0x1fbc8,
                0x1fc08, 0x1fc0c,
                0x1fc40, 0x1fc44,
                0x1fc4c, 0x1fc4c,
                0x1fe84, 0x1fe90,
                0x1fec0, 0x1fec0,
                0x1fee0, 0x1fee0,
                0x1ff00, 0x1ff84,
                0x1ffc0, 0x1ffc8,
                0x30000, 0x30030,
                0x30100, 0x30144,
                0x30190, 0x301a0,
                0x301a8, 0x301b8,
                0x301c4, 0x301c8,
                0x301d0, 0x301d0,
                0x30200, 0x30318,
                0x30400, 0x304b4,
                0x304c0, 0x3052c,
                0x30540, 0x3061c,
                0x30800, 0x30828,
                0x30834, 0x30834,
                0x308c0, 0x30908,
                0x30910, 0x309ac,
                0x30a00, 0x30a14,
                0x30a1c, 0x30a2c,
                0x30a44, 0x30a50,
                0x30a74, 0x30a74,
                0x30a7c, 0x30afc,
                0x30b08, 0x30c24,
                0x30d00, 0x30d00,
                0x30d08, 0x30d14,
                0x30d1c, 0x30d20,
                0x30d3c, 0x30d3c,
                0x30d48, 0x30d50,
                0x31200, 0x3120c,
                0x31220, 0x31220,
                0x31240, 0x31240,
                0x31600, 0x3160c,
                0x31a00, 0x31a1c,
                0x31e00, 0x31e20,
                0x31e38, 0x31e3c,
                0x31e80, 0x31e80,
                0x31e88, 0x31ea8,
                0x31eb0, 0x31eb4,
                0x31ec8, 0x31ed4,
                0x31fb8, 0x32004,
                0x32200, 0x32200,
                0x32208, 0x32240,
                0x32248, 0x32280,
                0x32288, 0x322c0,
                0x322c8, 0x322fc,
                0x32600, 0x32630,
                0x32a00, 0x32abc,
                0x32b00, 0x32b10,
                0x32b20, 0x32b30,
                0x32b40, 0x32b50,
                0x32b60, 0x32b70,
                0x33000, 0x33028,
                0x33030, 0x33048,
                0x33060, 0x33068,
                0x33070, 0x3309c,
                0x330f0, 0x33128,
                0x33130, 0x33148,
                0x33160, 0x33168,
                0x33170, 0x3319c,
                0x331f0, 0x33238,
                0x33240, 0x33240,
                0x33248, 0x33250,
                0x3325c, 0x33264,
                0x33270, 0x332b8,
                0x332c0, 0x332e4,
                0x332f8, 0x33338,
                0x33340, 0x33340,
                0x33348, 0x33350,
                0x3335c, 0x33364,
                0x33370, 0x333b8,
                0x333c0, 0x333e4,
                0x333f8, 0x33428,
                0x33430, 0x33448,
                0x33460, 0x33468,
                0x33470, 0x3349c,
                0x334f0, 0x33528,
                0x33530, 0x33548,
                0x33560, 0x33568,
                0x33570, 0x3359c,
                0x335f0, 0x33638,
                0x33640, 0x33640,
                0x33648, 0x33650,
                0x3365c, 0x33664,
                0x33670, 0x336b8,
                0x336c0, 0x336e4,
                0x336f8, 0x33738,
                0x33740, 0x33740,
                0x33748, 0x33750,
                0x3375c, 0x33764,
                0x33770, 0x337b8,
                0x337c0, 0x337e4,
                0x337f8, 0x337fc,
                0x33814, 0x33814,
                0x3382c, 0x3382c,
                0x33880, 0x3388c,
                0x338e8, 0x338ec,
                0x33900, 0x33928,
                0x33930, 0x33948,
                0x33960, 0x33968,
                0x33970, 0x3399c,
                0x339f0, 0x33a38,
                0x33a40, 0x33a40,
                0x33a48, 0x33a50,
                0x33a5c, 0x33a64,
                0x33a70, 0x33ab8,
                0x33ac0, 0x33ae4,
                0x33af8, 0x33b10,
                0x33b28, 0x33b28,
                0x33b3c, 0x33b50,
                0x33bf0, 0x33c10,
                0x33c28, 0x33c28,
                0x33c3c, 0x33c50,
                0x33cf0, 0x33cfc,
                0x34000, 0x34030,
                0x34100, 0x34144,
                0x34190, 0x341a0,
                0x341a8, 0x341b8,
                0x341c4, 0x341c8,
                0x341d0, 0x341d0,
                0x34200, 0x34318,
                0x34400, 0x344b4,
                0x344c0, 0x3452c,
                0x34540, 0x3461c,
                0x34800, 0x34828,
                0x34834, 0x34834,
                0x348c0, 0x34908,
                0x34910, 0x349ac,
                0x34a00, 0x34a14,
                0x34a1c, 0x34a2c,
                0x34a44, 0x34a50,
                0x34a74, 0x34a74,
                0x34a7c, 0x34afc,
                0x34b08, 0x34c24,
                0x34d00, 0x34d00,
                0x34d08, 0x34d14,
                0x34d1c, 0x34d20,
                0x34d3c, 0x34d3c,
                0x34d48, 0x34d50,
                0x35200, 0x3520c,
                0x35220, 0x35220,
                0x35240, 0x35240,
                0x35600, 0x3560c,
                0x35a00, 0x35a1c,
                0x35e00, 0x35e20,
                0x35e38, 0x35e3c,
                0x35e80, 0x35e80,
                0x35e88, 0x35ea8,
                0x35eb0, 0x35eb4,
                0x35ec8, 0x35ed4,
                0x35fb8, 0x36004,
                0x36200, 0x36200,
                0x36208, 0x36240,
                0x36248, 0x36280,
                0x36288, 0x362c0,
                0x362c8, 0x362fc,
                0x36600, 0x36630,
                0x36a00, 0x36abc,
                0x36b00, 0x36b10,
                0x36b20, 0x36b30,
                0x36b40, 0x36b50,
                0x36b60, 0x36b70,
                0x37000, 0x37028,
                0x37030, 0x37048,
                0x37060, 0x37068,
                0x37070, 0x3709c,
                0x370f0, 0x37128,
                0x37130, 0x37148,
                0x37160, 0x37168,
                0x37170, 0x3719c,
                0x371f0, 0x37238,
                0x37240, 0x37240,
                0x37248, 0x37250,
                0x3725c, 0x37264,
                0x37270, 0x372b8,
                0x372c0, 0x372e4,
                0x372f8, 0x37338,
                0x37340, 0x37340,
                0x37348, 0x37350,
                0x3735c, 0x37364,
                0x37370, 0x373b8,
                0x373c0, 0x373e4,
                0x373f8, 0x37428,
                0x37430, 0x37448,
                0x37460, 0x37468,
                0x37470, 0x3749c,
                0x374f0, 0x37528,
                0x37530, 0x37548,
                0x37560, 0x37568,
                0x37570, 0x3759c,
                0x375f0, 0x37638,
                0x37640, 0x37640,
                0x37648, 0x37650,
                0x3765c, 0x37664,
                0x37670, 0x376b8,
                0x376c0, 0x376e4,
                0x376f8, 0x37738,
                0x37740, 0x37740,
                0x37748, 0x37750,
                0x3775c, 0x37764,
                0x37770, 0x377b8,
                0x377c0, 0x377e4,
                0x377f8, 0x377fc,
                0x37814, 0x37814,
                0x3782c, 0x3782c,
                0x37880, 0x3788c,
                0x378e8, 0x378ec,
                0x37900, 0x37928,
                0x37930, 0x37948,
                0x37960, 0x37968,
                0x37970, 0x3799c,
                0x379f0, 0x37a38,
                0x37a40, 0x37a40,
                0x37a48, 0x37a50,
                0x37a5c, 0x37a64,
                0x37a70, 0x37ab8,
                0x37ac0, 0x37ae4,
                0x37af8, 0x37b10,
                0x37b28, 0x37b28,
                0x37b3c, 0x37b50,
                0x37bf0, 0x37c10,
                0x37c28, 0x37c28,
                0x37c3c, 0x37c50,
                0x37cf0, 0x37cfc,
                0x38000, 0x38030,
                0x38100, 0x38144,
                0x38190, 0x381a0,
                0x381a8, 0x381b8,
                0x381c4, 0x381c8,
                0x381d0, 0x381d0,
                0x38200, 0x38318,
                0x38400, 0x384b4,
                0x384c0, 0x3852c,
                0x38540, 0x3861c,
                0x38800, 0x38828,
                0x38834, 0x38834,
                0x388c0, 0x38908,
                0x38910, 0x389ac,
                0x38a00, 0x38a14,
                0x38a1c, 0x38a2c,
                0x38a44, 0x38a50,
                0x38a74, 0x38a74,
                0x38a7c, 0x38afc,
                0x38b08, 0x38c24,
                0x38d00, 0x38d00,
                0x38d08, 0x38d14,
                0x38d1c, 0x38d20,
                0x38d3c, 0x38d3c,
                0x38d48, 0x38d50,
                0x39200, 0x3920c,
                0x39220, 0x39220,
                0x39240, 0x39240,
                0x39600, 0x3960c,
                0x39a00, 0x39a1c,
                0x39e00, 0x39e20,
                0x39e38, 0x39e3c,
                0x39e80, 0x39e80,
                0x39e88, 0x39ea8,
                0x39eb0, 0x39eb4,
                0x39ec8, 0x39ed4,
                0x39fb8, 0x3a004,
                0x3a200, 0x3a200,
                0x3a208, 0x3a240,
                0x3a248, 0x3a280,
                0x3a288, 0x3a2c0,
                0x3a2c8, 0x3a2fc,
                0x3a600, 0x3a630,
                0x3aa00, 0x3aabc,
                0x3ab00, 0x3ab10,
                0x3ab20, 0x3ab30,
                0x3ab40, 0x3ab50,
                0x3ab60, 0x3ab70,
                0x3b000, 0x3b028,
                0x3b030, 0x3b048,
                0x3b060, 0x3b068,
                0x3b070, 0x3b09c,
                0x3b0f0, 0x3b128,
                0x3b130, 0x3b148,
                0x3b160, 0x3b168,
                0x3b170, 0x3b19c,
                0x3b1f0, 0x3b238,
                0x3b240, 0x3b240,
                0x3b248, 0x3b250,
                0x3b25c, 0x3b264,
                0x3b270, 0x3b2b8,
                0x3b2c0, 0x3b2e4,
                0x3b2f8, 0x3b338,
                0x3b340, 0x3b340,
                0x3b348, 0x3b350,
                0x3b35c, 0x3b364,
                0x3b370, 0x3b3b8,
                0x3b3c0, 0x3b3e4,
                0x3b3f8, 0x3b428,
                0x3b430, 0x3b448,
                0x3b460, 0x3b468,
                0x3b470, 0x3b49c,
                0x3b4f0, 0x3b528,
                0x3b530, 0x3b548,
                0x3b560, 0x3b568,
                0x3b570, 0x3b59c,
                0x3b5f0, 0x3b638,
                0x3b640, 0x3b640,
                0x3b648, 0x3b650,
                0x3b65c, 0x3b664,
                0x3b670, 0x3b6b8,
                0x3b6c0, 0x3b6e4,
                0x3b6f8, 0x3b738,
                0x3b740, 0x3b740,
                0x3b748, 0x3b750,
                0x3b75c, 0x3b764,
                0x3b770, 0x3b7b8,
                0x3b7c0, 0x3b7e4,
                0x3b7f8, 0x3b7fc,
                0x3b814, 0x3b814,
                0x3b82c, 0x3b82c,
                0x3b880, 0x3b88c,
                0x3b8e8, 0x3b8ec,
                0x3b900, 0x3b928,
                0x3b930, 0x3b948,
                0x3b960, 0x3b968,
                0x3b970, 0x3b99c,
                0x3b9f0, 0x3ba38,
                0x3ba40, 0x3ba40,
                0x3ba48, 0x3ba50,
                0x3ba5c, 0x3ba64,
                0x3ba70, 0x3bab8,
                0x3bac0, 0x3bae4,
                0x3baf8, 0x3bb10,
                0x3bb28, 0x3bb28,
                0x3bb3c, 0x3bb50,
                0x3bbf0, 0x3bc10,
                0x3bc28, 0x3bc28,
                0x3bc3c, 0x3bc50,
                0x3bcf0, 0x3bcfc,
                0x3c000, 0x3c030,
                0x3c100, 0x3c144,
                0x3c190, 0x3c1a0,
                0x3c1a8, 0x3c1b8,
                0x3c1c4, 0x3c1c8,
                0x3c1d0, 0x3c1d0,
                0x3c200, 0x3c318,
                0x3c400, 0x3c4b4,
                0x3c4c0, 0x3c52c,
                0x3c540, 0x3c61c,
                0x3c800, 0x3c828,
                0x3c834, 0x3c834,
                0x3c8c0, 0x3c908,
                0x3c910, 0x3c9ac,
                0x3ca00, 0x3ca14,
                0x3ca1c, 0x3ca2c,
                0x3ca44, 0x3ca50,
                0x3ca74, 0x3ca74,
                0x3ca7c, 0x3cafc,
                0x3cb08, 0x3cc24,
                0x3cd00, 0x3cd00,
                0x3cd08, 0x3cd14,
                0x3cd1c, 0x3cd20,
                0x3cd3c, 0x3cd3c,
                0x3cd48, 0x3cd50,
                0x3d200, 0x3d20c,
                0x3d220, 0x3d220,
                0x3d240, 0x3d240,
                0x3d600, 0x3d60c,
                0x3da00, 0x3da1c,
                0x3de00, 0x3de20,
                0x3de38, 0x3de3c,
                0x3de80, 0x3de80,
                0x3de88, 0x3dea8,
                0x3deb0, 0x3deb4,
                0x3dec8, 0x3ded4,
                0x3dfb8, 0x3e004,
                0x3e200, 0x3e200,
                0x3e208, 0x3e240,
                0x3e248, 0x3e280,
                0x3e288, 0x3e2c0,
                0x3e2c8, 0x3e2fc,
                0x3e600, 0x3e630,
                0x3ea00, 0x3eabc,
                0x3eb00, 0x3eb10,
                0x3eb20, 0x3eb30,
                0x3eb40, 0x3eb50,
                0x3eb60, 0x3eb70,
                0x3f000, 0x3f028,
                0x3f030, 0x3f048,
                0x3f060, 0x3f068,
                0x3f070, 0x3f09c,
                0x3f0f0, 0x3f128,
                0x3f130, 0x3f148,
                0x3f160, 0x3f168,
                0x3f170, 0x3f19c,
                0x3f1f0, 0x3f238,
                0x3f240, 0x3f240,
                0x3f248, 0x3f250,
                0x3f25c, 0x3f264,
                0x3f270, 0x3f2b8,
                0x3f2c0, 0x3f2e4,
                0x3f2f8, 0x3f338,
                0x3f340, 0x3f340,
                0x3f348, 0x3f350,
                0x3f35c, 0x3f364,
                0x3f370, 0x3f3b8,
                0x3f3c0, 0x3f3e4,
                0x3f3f8, 0x3f428,
                0x3f430, 0x3f448,
                0x3f460, 0x3f468,
                0x3f470, 0x3f49c,
                0x3f4f0, 0x3f528,
                0x3f530, 0x3f548,
                0x3f560, 0x3f568,
                0x3f570, 0x3f59c,
                0x3f5f0, 0x3f638,
                0x3f640, 0x3f640,
                0x3f648, 0x3f650,
                0x3f65c, 0x3f664,
                0x3f670, 0x3f6b8,
                0x3f6c0, 0x3f6e4,
                0x3f6f8, 0x3f738,
                0x3f740, 0x3f740,
                0x3f748, 0x3f750,
                0x3f75c, 0x3f764,
                0x3f770, 0x3f7b8,
                0x3f7c0, 0x3f7e4,
                0x3f7f8, 0x3f7fc,
                0x3f814, 0x3f814,
                0x3f82c, 0x3f82c,
                0x3f880, 0x3f88c,
                0x3f8e8, 0x3f8ec,
                0x3f900, 0x3f928,
                0x3f930, 0x3f948,
                0x3f960, 0x3f968,
                0x3f970, 0x3f99c,
                0x3f9f0, 0x3fa38,
                0x3fa40, 0x3fa40,
                0x3fa48, 0x3fa50,
                0x3fa5c, 0x3fa64,
                0x3fa70, 0x3fab8,
                0x3fac0, 0x3fae4,
                0x3faf8, 0x3fb10,
                0x3fb28, 0x3fb28,
                0x3fb3c, 0x3fb50,
                0x3fbf0, 0x3fc10,
                0x3fc28, 0x3fc28,
                0x3fc3c, 0x3fc50,
                0x3fcf0, 0x3fcfc,
                0x40000, 0x4000c,
                0x40040, 0x40050,
                0x40060, 0x40068,
                0x4007c, 0x4008c,
                0x40094, 0x400b0,
                0x400c0, 0x40144,
                0x40180, 0x4018c,
                0x40200, 0x40254,
                0x40260, 0x40264,
                0x40270, 0x40288,
                0x40290, 0x40298,
                0x402ac, 0x402c8,
                0x402d0, 0x402e0,
                0x402f0, 0x402f0,
                0x40300, 0x4033c,
                0x403f8, 0x403fc,
                0x41304, 0x413c4,
                0x41400, 0x4140c,
                0x41414, 0x4141c,
                0x41480, 0x414d0,
                0x44000, 0x44054,
                0x4405c, 0x44078,
                0x440c0, 0x44174,
                0x44180, 0x441ac,
                0x441b4, 0x441b8,
                0x441c0, 0x44254,
                0x4425c, 0x44278,
                0x442c0, 0x44374,
                0x44380, 0x443ac,
                0x443b4, 0x443b8,
                0x443c0, 0x44454,
                0x4445c, 0x44478,
                0x444c0, 0x44574,
                0x44580, 0x445ac,
                0x445b4, 0x445b8,
                0x445c0, 0x44654,
                0x4465c, 0x44678,
                0x446c0, 0x44774,
                0x44780, 0x447ac,
                0x447b4, 0x447b8,
                0x447c0, 0x44854,
                0x4485c, 0x44878,
                0x448c0, 0x44974,
                0x44980, 0x449ac,
                0x449b4, 0x449b8,
                0x449c0, 0x449fc,
                0x45000, 0x45004,
                0x45010, 0x45030,
                0x45040, 0x45060,
                0x45068, 0x45068,
                0x45080, 0x45084,
                0x450a0, 0x450b0,
                0x45200, 0x45204,
                0x45210, 0x45230,
                0x45240, 0x45260,
                0x45268, 0x45268,
                0x45280, 0x45284,
                0x452a0, 0x452b0,
                0x460c0, 0x460e4,
                0x47000, 0x4703c,
                0x47044, 0x4708c,
                0x47200, 0x47250,
                0x47400, 0x47408,
                0x47414, 0x47420,
                0x47600, 0x47618,
                0x47800, 0x47814,
                0x48000, 0x4800c,
                0x48040, 0x48050,
                0x48060, 0x48068,
                0x4807c, 0x4808c,
                0x48094, 0x480b0,
                0x480c0, 0x48144,
                0x48180, 0x4818c,
                0x48200, 0x48254,
                0x48260, 0x48264,
                0x48270, 0x48288,
                0x48290, 0x48298,
                0x482ac, 0x482c8,
                0x482d0, 0x482e0,
                0x482f0, 0x482f0,
                0x48300, 0x4833c,
                0x483f8, 0x483fc,
                0x49304, 0x493c4,
                0x49400, 0x4940c,
                0x49414, 0x4941c,
                0x49480, 0x494d0,
                0x4c000, 0x4c054,
                0x4c05c, 0x4c078,
                0x4c0c0, 0x4c174,
                0x4c180, 0x4c1ac,
                0x4c1b4, 0x4c1b8,
                0x4c1c0, 0x4c254,
                0x4c25c, 0x4c278,
                0x4c2c0, 0x4c374,
                0x4c380, 0x4c3ac,
                0x4c3b4, 0x4c3b8,
                0x4c3c0, 0x4c454,
                0x4c45c, 0x4c478,
                0x4c4c0, 0x4c574,
                0x4c580, 0x4c5ac,
                0x4c5b4, 0x4c5b8,
                0x4c5c0, 0x4c654,
                0x4c65c, 0x4c678,
                0x4c6c0, 0x4c774,
                0x4c780, 0x4c7ac,
                0x4c7b4, 0x4c7b8,
                0x4c7c0, 0x4c854,
                0x4c85c, 0x4c878,
                0x4c8c0, 0x4c974,
                0x4c980, 0x4c9ac,
                0x4c9b4, 0x4c9b8,
                0x4c9c0, 0x4c9fc,
                0x4d000, 0x4d004,
                0x4d010, 0x4d030,
                0x4d040, 0x4d060,
                0x4d068, 0x4d068,
                0x4d080, 0x4d084,
                0x4d0a0, 0x4d0b0,
                0x4d200, 0x4d204,
                0x4d210, 0x4d230,
                0x4d240, 0x4d260,
                0x4d268, 0x4d268,
                0x4d280, 0x4d284,
                0x4d2a0, 0x4d2b0,
                0x4e0c0, 0x4e0e4,
                0x4f000, 0x4f03c,
                0x4f044, 0x4f08c,
                0x4f200, 0x4f250,
                0x4f400, 0x4f408,
                0x4f414, 0x4f420,
                0x4f600, 0x4f618,
                0x4f800, 0x4f814,
                0x50000, 0x50084,
                0x50090, 0x500cc,
                0x50400, 0x50400,
                0x50800, 0x50884,
                0x50890, 0x508cc,
                0x50c00, 0x50c00,
                0x51000, 0x5101c,
                0x51300, 0x51308,
        };

        static const unsigned int t6_reg_ranges[] = {
                0x1008, 0x101c,
                0x1024, 0x10a8,
                0x10b4, 0x10f8,
                0x1100, 0x1114,
                0x111c, 0x112c,
                0x1138, 0x113c,
                0x1144, 0x114c,
                0x1180, 0x1184,
                0x1190, 0x1194,
                0x11a0, 0x11a4,
                0x11b0, 0x11b4,
                0x11fc, 0x123c,
                0x1254, 0x1274,
                0x1280, 0x133c,
                0x1800, 0x18fc,
                0x3000, 0x302c,
                0x3060, 0x30b0,
                0x30b8, 0x30d8,
                0x30e0, 0x30fc,
                0x3140, 0x357c,
                0x35a8, 0x35cc,
                0x35ec, 0x35ec,
                0x3600, 0x5624,
                0x56cc, 0x56ec,
                0x56f4, 0x5720,
                0x5728, 0x575c,
                0x580c, 0x5814,
                0x5890, 0x589c,
                0x58a4, 0x58ac,
                0x58b8, 0x58bc,
                0x5940, 0x595c,
                0x5980, 0x598c,
                0x59b0, 0x59c8,
                0x59d0, 0x59dc,
                0x59fc, 0x5a18,
                0x5a60, 0x5a6c,
                0x5a80, 0x5a8c,
                0x5a94, 0x5a9c,
                0x5b94, 0x5bfc,
                0x5c10, 0x5e48,
                0x5e50, 0x5e94,
                0x5ea0, 0x5eb0,
                0x5ec0, 0x5ec0,
                0x5ec8, 0x5ed0,
                0x5ee0, 0x5ee0,
                0x5ef0, 0x5ef0,
                0x5f00, 0x5f00,
                0x6000, 0x6020,
                0x6028, 0x6040,
                0x6058, 0x609c,
                0x60a8, 0x619c,
                0x7700, 0x7798,
                0x77c0, 0x7880,
                0x78cc, 0x78fc,
                0x7b00, 0x7b58,
                0x7b60, 0x7b84,
                0x7b8c, 0x7c54,
                0x7d00, 0x7d38,
                0x7d40, 0x7d84,
                0x7d8c, 0x7ddc,
                0x7de4, 0x7e04,
                0x7e10, 0x7e1c,
                0x7e24, 0x7e38,
                0x7e40, 0x7e44,
                0x7e4c, 0x7e78,
                0x7e80, 0x7edc,
                0x7ee8, 0x7efc,
                0x8dc0, 0x8de4,
                0x8df8, 0x8e04,
                0x8e10, 0x8e84,
                0x8ea0, 0x8f88,
                0x8fb8, 0x9058,
                0x9060, 0x9060,
                0x9068, 0x90f8,
                0x9100, 0x9124,
                0x9400, 0x9470,
                0x9600, 0x9600,
                0x9608, 0x9638,
                0x9640, 0x9704,
                0x9710, 0x971c,
                0x9800, 0x9808,
                0x9810, 0x9864,
                0x9c00, 0x9c6c,
                0x9c80, 0x9cec,
                0x9d00, 0x9d6c,
                0x9d80, 0x9dec,
                0x9e00, 0x9e6c,
                0x9e80, 0x9eec,
                0x9f00, 0x9f6c,
                0x9f80, 0xa020,
                0xd000, 0xd03c,
                0xd100, 0xd118,
                0xd200, 0xd214,
                0xd220, 0xd234,
                0xd240, 0xd254,
                0xd260, 0xd274,
                0xd280, 0xd294,
                0xd2a0, 0xd2b4,
                0xd2c0, 0xd2d4,
                0xd2e0, 0xd2f4,
                0xd300, 0xd31c,
                0xdfc0, 0xdfe0,
                0xe000, 0xf008,
                0xf010, 0xf018,
                0xf020, 0xf028,
                0x11000, 0x11014,
                0x11048, 0x1106c,
                0x11074, 0x11088,
                0x11098, 0x11120,
                0x1112c, 0x1117c,
                0x11190, 0x112e0,
                0x11300, 0x1130c,
                0x12000, 0x1206c,
                0x19040, 0x1906c,
                0x19078, 0x19080,
                0x1908c, 0x190e8,
                0x190f0, 0x190f8,
                0x19100, 0x19110,
                0x19120, 0x19124,
                0x19150, 0x19194,
                0x1919c, 0x191b0,
                0x191d0, 0x191e8,
                0x19238, 0x19290,
                0x192a4, 0x192b0,
                0x192bc, 0x192bc,
                0x19348, 0x1934c,
                0x193f8, 0x19418,
                0x19420, 0x19428,
                0x19430, 0x19444,
                0x1944c, 0x1946c,
                0x19474, 0x19474,
                0x19490, 0x194cc,
                0x194f0, 0x194f8,
                0x19c00, 0x19c48,
                0x19c50, 0x19c80,
                0x19c94, 0x19c98,
                0x19ca0, 0x19cbc,
                0x19ce4, 0x19ce4,
                0x19cf0, 0x19cf8,
                0x19d00, 0x19d28,
                0x19d50, 0x19d78,
                0x19d94, 0x19d98,
                0x19da0, 0x19dc8,
                0x19df0, 0x19e10,
                0x19e50, 0x19e6c,
                0x19ea0, 0x19ebc,
                0x19ec4, 0x19ef4,
                0x19f04, 0x19f2c,
                0x19f34, 0x19f34,
                0x19f40, 0x19f50,
                0x19f90, 0x19fac,
                0x19fc4, 0x19fc8,
                0x19fd0, 0x19fe4,
                0x1a000, 0x1a004,
                0x1a010, 0x1a06c,
                0x1a0b0, 0x1a0e4,
                0x1a0ec, 0x1a0f8,
                0x1a100, 0x1a108,
                0x1a114, 0x1a130,
                0x1a138, 0x1a1c4,
                0x1a1fc, 0x1a1fc,
                0x1e008, 0x1e00c,
                0x1e040, 0x1e044,
                0x1e04c, 0x1e04c,
                0x1e284, 0x1e290,
                0x1e2c0, 0x1e2c0,
                0x1e2e0, 0x1e2e0,
                0x1e300, 0x1e384,
                0x1e3c0, 0x1e3c8,
                0x1e408, 0x1e40c,
                0x1e440, 0x1e444,
                0x1e44c, 0x1e44c,
                0x1e684, 0x1e690,
                0x1e6c0, 0x1e6c0,
                0x1e6e0, 0x1e6e0,
                0x1e700, 0x1e784,
                0x1e7c0, 0x1e7c8,
                0x1e808, 0x1e80c,
                0x1e840, 0x1e844,
                0x1e84c, 0x1e84c,
                0x1ea84, 0x1ea90,
                0x1eac0, 0x1eac0,
                0x1eae0, 0x1eae0,
                0x1eb00, 0x1eb84,
                0x1ebc0, 0x1ebc8,
                0x1ec08, 0x1ec0c,
                0x1ec40, 0x1ec44,
                0x1ec4c, 0x1ec4c,
                0x1ee84, 0x1ee90,
                0x1eec0, 0x1eec0,
                0x1eee0, 0x1eee0,
                0x1ef00, 0x1ef84,
                0x1efc0, 0x1efc8,
                0x1f008, 0x1f00c,
                0x1f040, 0x1f044,
                0x1f04c, 0x1f04c,
                0x1f284, 0x1f290,
                0x1f2c0, 0x1f2c0,
                0x1f2e0, 0x1f2e0,
                0x1f300, 0x1f384,
                0x1f3c0, 0x1f3c8,
                0x1f408, 0x1f40c,
                0x1f440, 0x1f444,
                0x1f44c, 0x1f44c,
                0x1f684, 0x1f690,
                0x1f6c0, 0x1f6c0,
                0x1f6e0, 0x1f6e0,
                0x1f700, 0x1f784,
                0x1f7c0, 0x1f7c8,
                0x1f808, 0x1f80c,
                0x1f840, 0x1f844,
                0x1f84c, 0x1f84c,
                0x1fa84, 0x1fa90,
                0x1fac0, 0x1fac0,
                0x1fae0, 0x1fae0,
                0x1fb00, 0x1fb84,
                0x1fbc0, 0x1fbc8,
                0x1fc08, 0x1fc0c,
                0x1fc40, 0x1fc44,
                0x1fc4c, 0x1fc4c,
                0x1fe84, 0x1fe90,
                0x1fec0, 0x1fec0,
                0x1fee0, 0x1fee0,
                0x1ff00, 0x1ff84,
                0x1ffc0, 0x1ffc8,
                0x30000, 0x30030,
                0x30100, 0x30168,
                0x30190, 0x301a0,
                0x301a8, 0x301b8,
                0x301c4, 0x301c8,
                0x301d0, 0x301d0,
                0x30200, 0x30320,
                0x30400, 0x304b4,
                0x304c0, 0x3052c,
                0x30540, 0x3061c,
                0x30800, 0x308a0,
                0x308c0, 0x30908,
                0x30910, 0x309b8,
                0x30a00, 0x30a04,
                0x30a0c, 0x30a14,
                0x30a1c, 0x30a2c,
                0x30a44, 0x30a50,
                0x30a74, 0x30a74,
                0x30a7c, 0x30afc,
                0x30b08, 0x30c24,
                0x30d00, 0x30d14,
                0x30d1c, 0x30d3c,
                0x30d44, 0x30d4c,
                0x30d54, 0x30d74,
                0x30d7c, 0x30d7c,
                0x30de0, 0x30de0,
                0x30e00, 0x30ed4,
                0x30f00, 0x30fa4,
                0x30fc0, 0x30fc4,
                0x31000, 0x31004,
                0x31080, 0x310fc,
                0x31208, 0x31220,
                0x3123c, 0x31254,
                0x31300, 0x31300,
                0x31308, 0x3131c,
                0x31338, 0x3133c,
                0x31380, 0x31380,
                0x31388, 0x313a8,
                0x313b4, 0x313b4,
                0x31400, 0x31420,
                0x31438, 0x3143c,
                0x31480, 0x31480,
                0x314a8, 0x314a8,
                0x314b0, 0x314b4,
                0x314c8, 0x314d4,
                0x31a40, 0x31a4c,
                0x31af0, 0x31b20,
                0x31b38, 0x31b3c,
                0x31b80, 0x31b80,
                0x31ba8, 0x31ba8,
                0x31bb0, 0x31bb4,
                0x31bc8, 0x31bd4,
                0x32140, 0x3218c,
                0x321f0, 0x321f4,
                0x32200, 0x32200,
                0x32218, 0x32218,
                0x32400, 0x32400,
                0x32408, 0x3241c,
                0x32618, 0x32620,
                0x32664, 0x32664,
                0x326a8, 0x326a8,
                0x326ec, 0x326ec,
                0x32a00, 0x32abc,
                0x32b00, 0x32b18,
                0x32b20, 0x32b38,
                0x32b40, 0x32b58,
                0x32b60, 0x32b78,
                0x32c00, 0x32c00,
                0x32c08, 0x32c3c,
                0x33000, 0x3302c,
                0x33034, 0x33050,
                0x33058, 0x33058,
                0x33060, 0x3308c,
                0x3309c, 0x330ac,
                0x330c0, 0x330c0,
                0x330c8, 0x330d0,
                0x330d8, 0x330e0,
                0x330ec, 0x3312c,
                0x33134, 0x33150,
                0x33158, 0x33158,
                0x33160, 0x3318c,
                0x3319c, 0x331ac,
                0x331c0, 0x331c0,
                0x331c8, 0x331d0,
                0x331d8, 0x331e0,
                0x331ec, 0x33290,
                0x33298, 0x332c4,
                0x332e4, 0x33390,
                0x33398, 0x333c4,
                0x333e4, 0x3342c,
                0x33434, 0x33450,
                0x33458, 0x33458,
                0x33460, 0x3348c,
                0x3349c, 0x334ac,
                0x334c0, 0x334c0,
                0x334c8, 0x334d0,
                0x334d8, 0x334e0,
                0x334ec, 0x3352c,
                0x33534, 0x33550,
                0x33558, 0x33558,
                0x33560, 0x3358c,
                0x3359c, 0x335ac,
                0x335c0, 0x335c0,
                0x335c8, 0x335d0,
                0x335d8, 0x335e0,
                0x335ec, 0x33690,
                0x33698, 0x336c4,
                0x336e4, 0x33790,
                0x33798, 0x337c4,
                0x337e4, 0x337fc,
                0x33814, 0x33814,
                0x33854, 0x33868,
                0x33880, 0x3388c,
                0x338c0, 0x338d0,
                0x338e8, 0x338ec,
                0x33900, 0x3392c,
                0x33934, 0x33950,
                0x33958, 0x33958,
                0x33960, 0x3398c,
                0x3399c, 0x339ac,
                0x339c0, 0x339c0,
                0x339c8, 0x339d0,
                0x339d8, 0x339e0,
                0x339ec, 0x33a90,
                0x33a98, 0x33ac4,
                0x33ae4, 0x33b10,
                0x33b24, 0x33b28,
                0x33b38, 0x33b50,
                0x33bf0, 0x33c10,
                0x33c24, 0x33c28,
                0x33c38, 0x33c50,
                0x33cf0, 0x33cfc,
                0x34000, 0x34030,
                0x34100, 0x34168,
                0x34190, 0x341a0,
                0x341a8, 0x341b8,
                0x341c4, 0x341c8,
                0x341d0, 0x341d0,
                0x34200, 0x34320,
                0x34400, 0x344b4,
                0x344c0, 0x3452c,
                0x34540, 0x3461c,
                0x34800, 0x348a0,
                0x348c0, 0x34908,
                0x34910, 0x349b8,
                0x34a00, 0x34a04,
                0x34a0c, 0x34a14,
                0x34a1c, 0x34a2c,
                0x34a44, 0x34a50,
                0x34a74, 0x34a74,
                0x34a7c, 0x34afc,
                0x34b08, 0x34c24,
                0x34d00, 0x34d14,
                0x34d1c, 0x34d3c,
                0x34d44, 0x34d4c,
                0x34d54, 0x34d74,
                0x34d7c, 0x34d7c,
                0x34de0, 0x34de0,
                0x34e00, 0x34ed4,
                0x34f00, 0x34fa4,
                0x34fc0, 0x34fc4,
                0x35000, 0x35004,
                0x35080, 0x350fc,
                0x35208, 0x35220,
                0x3523c, 0x35254,
                0x35300, 0x35300,
                0x35308, 0x3531c,
                0x35338, 0x3533c,
                0x35380, 0x35380,
                0x35388, 0x353a8,
                0x353b4, 0x353b4,
                0x35400, 0x35420,
                0x35438, 0x3543c,
                0x35480, 0x35480,
                0x354a8, 0x354a8,
                0x354b0, 0x354b4,
                0x354c8, 0x354d4,
                0x35a40, 0x35a4c,
                0x35af0, 0x35b20,
                0x35b38, 0x35b3c,
                0x35b80, 0x35b80,
                0x35ba8, 0x35ba8,
                0x35bb0, 0x35bb4,
                0x35bc8, 0x35bd4,
                0x36140, 0x3618c,
                0x361f0, 0x361f4,
                0x36200, 0x36200,
                0x36218, 0x36218,
                0x36400, 0x36400,
                0x36408, 0x3641c,
                0x36618, 0x36620,
                0x36664, 0x36664,
                0x366a8, 0x366a8,
                0x366ec, 0x366ec,
                0x36a00, 0x36abc,
                0x36b00, 0x36b18,
                0x36b20, 0x36b38,
                0x36b40, 0x36b58,
                0x36b60, 0x36b78,
                0x36c00, 0x36c00,
                0x36c08, 0x36c3c,
                0x37000, 0x3702c,
                0x37034, 0x37050,
                0x37058, 0x37058,
                0x37060, 0x3708c,
                0x3709c, 0x370ac,
                0x370c0, 0x370c0,
                0x370c8, 0x370d0,
                0x370d8, 0x370e0,
                0x370ec, 0x3712c,
                0x37134, 0x37150,
                0x37158, 0x37158,
                0x37160, 0x3718c,
                0x3719c, 0x371ac,
                0x371c0, 0x371c0,
                0x371c8, 0x371d0,
                0x371d8, 0x371e0,
                0x371ec, 0x37290,
                0x37298, 0x372c4,
                0x372e4, 0x37390,
                0x37398, 0x373c4,
                0x373e4, 0x3742c,
                0x37434, 0x37450,
                0x37458, 0x37458,
                0x37460, 0x3748c,
                0x3749c, 0x374ac,
                0x374c0, 0x374c0,
                0x374c8, 0x374d0,
                0x374d8, 0x374e0,
                0x374ec, 0x3752c,
                0x37534, 0x37550,
                0x37558, 0x37558,
                0x37560, 0x3758c,
                0x3759c, 0x375ac,
                0x375c0, 0x375c0,
                0x375c8, 0x375d0,
                0x375d8, 0x375e0,
                0x375ec, 0x37690,
                0x37698, 0x376c4,
                0x376e4, 0x37790,
                0x37798, 0x377c4,
                0x377e4, 0x377fc,
                0x37814, 0x37814,
                0x37854, 0x37868,
                0x37880, 0x3788c,
                0x378c0, 0x378d0,
                0x378e8, 0x378ec,
                0x37900, 0x3792c,
                0x37934, 0x37950,
                0x37958, 0x37958,
                0x37960, 0x3798c,
                0x3799c, 0x379ac,
                0x379c0, 0x379c0,
                0x379c8, 0x379d0,
                0x379d8, 0x379e0,
                0x379ec, 0x37a90,
                0x37a98, 0x37ac4,
                0x37ae4, 0x37b10,
                0x37b24, 0x37b28,
                0x37b38, 0x37b50,
                0x37bf0, 0x37c10,
                0x37c24, 0x37c28,
                0x37c38, 0x37c50,
                0x37cf0, 0x37cfc,
                0x40040, 0x40040,
                0x40080, 0x40084,
                0x40100, 0x40100,
                0x40140, 0x401bc,
                0x40200, 0x40214,
                0x40228, 0x40228,
                0x40240, 0x40258,
                0x40280, 0x40280,
                0x40304, 0x40304,
                0x40330, 0x4033c,
                0x41304, 0x413c8,
                0x413d0, 0x413dc,
                0x413f0, 0x413f0,
                0x41400, 0x4140c,
                0x41414, 0x4141c,
                0x41480, 0x414d0,
                0x44000, 0x4407c,
                0x440c0, 0x441ac,
                0x441b4, 0x4427c,
                0x442c0, 0x443ac,
                0x443b4, 0x4447c,
                0x444c0, 0x445ac,
                0x445b4, 0x4467c,
                0x446c0, 0x447ac,
                0x447b4, 0x4487c,
                0x448c0, 0x449ac,
                0x449b4, 0x44a7c,
                0x44ac0, 0x44bac,
                0x44bb4, 0x44c7c,
                0x44cc0, 0x44dac,
                0x44db4, 0x44e7c,
                0x44ec0, 0x44fac,
                0x44fb4, 0x4507c,
                0x450c0, 0x451ac,
                0x451b4, 0x451fc,
                0x45800, 0x45804,
                0x45810, 0x45830,
                0x45840, 0x45860,
                0x45868, 0x45868,
                0x45880, 0x45884,
                0x458a0, 0x458b0,
                0x45a00, 0x45a04,
                0x45a10, 0x45a30,
                0x45a40, 0x45a60,
                0x45a68, 0x45a68,
                0x45a80, 0x45a84,
                0x45aa0, 0x45ab0,
                0x460c0, 0x460e4,
                0x47000, 0x4703c,
                0x47044, 0x4708c,
                0x47200, 0x47250,
                0x47400, 0x47408,
                0x47414, 0x47420,
                0x47600, 0x47618,
                0x47800, 0x47814,
                0x47820, 0x4782c,
                0x50000, 0x50084,
                0x50090, 0x500cc,
                0x50300, 0x50384,
                0x50400, 0x50400,
                0x50800, 0x50884,
                0x50890, 0x508cc,
                0x50b00, 0x50b84,
                0x50c00, 0x50c00,
                0x51000, 0x51020,
                0x51028, 0x510b0,
                0x51300, 0x51324,
        };

        u32 *buf_end = (u32 *)((char *)buf + buf_size);
        const unsigned int *reg_ranges;
        int reg_ranges_size, range;
        unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip);

        /* Select the right set of register ranges to dump depending on the
         * adapter chip type.
         */
        switch (chip_version) {
        case CHELSIO_T4:
                reg_ranges = t4_reg_ranges;
                reg_ranges_size = ARRAY_SIZE(t4_reg_ranges);
                break;

        case CHELSIO_T5:
                reg_ranges = t5_reg_ranges;
                reg_ranges_size = ARRAY_SIZE(t5_reg_ranges);
                break;

        case CHELSIO_T6:
                reg_ranges = t6_reg_ranges;
                reg_ranges_size = ARRAY_SIZE(t6_reg_ranges);
                break;

        default:
                dev_err(adap->pdev_dev,
                        "Unsupported chip version %d\n", chip_version);
                return;
        }

        /* Clear the register buffer and insert the appropriate register
         * values selected by the above register ranges.
         */
        memset(buf, 0, buf_size);
        for (range = 0; range < reg_ranges_size; range += 2) {
                unsigned int reg = reg_ranges[range];
                unsigned int last_reg = reg_ranges[range + 1];
                u32 *bufp = (u32 *)((char *)buf + reg);

                /* Iterate across the register range filling in the register
                 * buffer but don't write past the end of the register buffer.
                 */
                while (reg <= last_reg && bufp < buf_end) {
                        *bufp++ = t4_read_reg(adap, reg);
                        reg += sizeof(u32);
                }
        }
}

#define EEPROM_STAT_ADDR   0x7bfc
#define VPD_BASE           0x400
#define VPD_BASE_OLD       0
#define VPD_LEN            1024

/**
 * t4_eeprom_ptov - translate a physical EEPROM address to virtual
 * @phys_addr: the physical EEPROM address
 * @fn: the PCI function number
 * @sz: size of function-specific area
 *
 * Translate a physical EEPROM address to virtual.  The first 1K is
 * accessed through virtual addresses starting at 31K, the rest is
 * accessed through virtual addresses starting at 0.
 *
 * The mapping is as follows:
 * [0..1K) -> [31K..32K)
 * [1K..1K+A) -> [31K-A..31K)
 * [1K+A..ES) -> [0..ES-A-1K)
 *
 * where A = @fn * @sz, and ES = EEPROM size.
 */
int t4_eeprom_ptov(unsigned int phys_addr, unsigned int fn, unsigned int sz)
{
        fn *= sz;
        if (phys_addr < 1024)
                return phys_addr + (31 << 10);
        if (phys_addr < 1024 + fn)
                return 31744 - fn + phys_addr - 1024;
        if (phys_addr < EEPROMSIZE)
                return phys_addr - 1024 - fn;
        return -EINVAL;
}

/**
 *      t4_seeprom_wp - enable/disable EEPROM write protection
 *      @adapter: the adapter
 *      @enable: whether to enable or disable write protection
 *
 *      Enables or disables write protection on the serial EEPROM.
 */
int t4_seeprom_wp(struct adapter *adapter, bool enable)
{
        unsigned int v = enable ? 0xc : 0;
        int ret = pci_write_vpd(adapter->pdev, EEPROM_STAT_ADDR, 4, &v);
        return ret < 0 ? ret : 0;
}

/**
 *      t4_get_raw_vpd_params - read VPD parameters from VPD EEPROM
 *      @adapter: adapter to read
 *      @p: where to store the parameters
 *
 *      Reads card parameters stored in VPD EEPROM.
 */
int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p)
{
        unsigned int id_len, pn_len, sn_len, na_len;
        int id, sn, pn, na, addr, ret = 0;
        u8 *vpd, base_val = 0;

        vpd = vmalloc(VPD_LEN);
        if (!vpd)
                return -ENOMEM;

        /* Card information normally starts at VPD_BASE but early cards had
         * it at 0.
         */
        ret = pci_read_vpd(adapter->pdev, VPD_BASE, 1, &base_val);
        if (ret < 0)
                goto out;

        addr = base_val == PCI_VPD_LRDT_ID_STRING ? VPD_BASE : VPD_BASE_OLD;

        ret = pci_read_vpd(adapter->pdev, addr, VPD_LEN, vpd);
        if (ret < 0)
                goto out;

        ret = pci_vpd_find_id_string(vpd, VPD_LEN, &id_len);
        if (ret < 0)
                goto out;
        id = ret;

        ret = pci_vpd_check_csum(vpd, VPD_LEN);
        if (ret) {
                dev_err(adapter->pdev_dev, "VPD checksum incorrect or missing\n");
                ret = -EINVAL;
                goto out;
        }

        ret = pci_vpd_find_ro_info_keyword(vpd, VPD_LEN,
                                           PCI_VPD_RO_KEYWORD_SERIALNO, &sn_len);
        if (ret < 0)
                goto out;
        sn = ret;

        ret = pci_vpd_find_ro_info_keyword(vpd, VPD_LEN,
                                           PCI_VPD_RO_KEYWORD_PARTNO, &pn_len);
        if (ret < 0)
                goto out;
        pn = ret;

        ret = pci_vpd_find_ro_info_keyword(vpd, VPD_LEN, "NA", &na_len);
        if (ret < 0)
                goto out;
        na = ret;

        memcpy(p->id, vpd + id, min_t(unsigned int, id_len, ID_LEN));
        strim(p->id);
        memcpy(p->sn, vpd + sn, min_t(unsigned int, sn_len, SERNUM_LEN));
        strim(p->sn);
        memcpy(p->pn, vpd + pn, min_t(unsigned int, pn_len, PN_LEN));
        strim(p->pn);
        memcpy(p->na, vpd + na, min_t(unsigned int, na_len, MACADDR_LEN));
        strim(p->na);

out:
        vfree(vpd);
        if (ret < 0) {
                dev_err(adapter->pdev_dev, "error reading VPD\n");
                return ret;
        }

        return 0;
}

/**
 *      t4_get_vpd_params - read VPD parameters & retrieve Core Clock
 *      @adapter: adapter to read
 *      @p: where to store the parameters
 *
 *      Reads card parameters stored in VPD EEPROM and retrieves the Core
 *      Clock.  This can only be called after a connection to the firmware
 *      is established.
 */
int t4_get_vpd_params(struct adapter *adapter, struct vpd_params *p)
{
        u32 cclk_param, cclk_val;
        int ret;

        /* Grab the raw VPD parameters.
         */
        ret = t4_get_raw_vpd_params(adapter, p);
        if (ret)
                return ret;

        /* Ask firmware for the Core Clock since it knows how to translate the
         * Reference Clock ('V2') VPD field into a Core Clock value ...
         */
        cclk_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
                      FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_CCLK));
        ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
                              1, &cclk_param, &cclk_val);

        if (ret)
                return ret;
        p->cclk = cclk_val;

        return 0;
}

/**
 *      t4_get_pfres - retrieve VF resource limits
 *      @adapter: the adapter
 *
 *      Retrieves configured resource limits and capabilities for a physical
 *      function.  The results are stored in @adapter->pfres.
 */
int t4_get_pfres(struct adapter *adapter)
{
        struct pf_resources *pfres = &adapter->params.pfres;
        struct fw_pfvf_cmd cmd, rpl;
        int v;
        u32 word;

        /* Execute PFVF Read command to get VF resource limits; bail out early
         * with error on command failure.
         */
        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PFVF_CMD) |
                                    FW_CMD_REQUEST_F |
                                    FW_CMD_READ_F |
                                    FW_PFVF_CMD_PFN_V(adapter->pf) |
                                    FW_PFVF_CMD_VFN_V(0));
        cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));
        v = t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &rpl);
        if (v != FW_SUCCESS)
                return v;

        /* Extract PF resource limits and return success.
         */
        word = be32_to_cpu(rpl.niqflint_niq);
        pfres->niqflint = FW_PFVF_CMD_NIQFLINT_G(word);
        pfres->niq = FW_PFVF_CMD_NIQ_G(word);

        word = be32_to_cpu(rpl.type_to_neq);
        pfres->neq = FW_PFVF_CMD_NEQ_G(word);
        pfres->pmask = FW_PFVF_CMD_PMASK_G(word);

        word = be32_to_cpu(rpl.tc_to_nexactf);
        pfres->tc = FW_PFVF_CMD_TC_G(word);
        pfres->nvi = FW_PFVF_CMD_NVI_G(word);
        pfres->nexactf = FW_PFVF_CMD_NEXACTF_G(word);

        word = be32_to_cpu(rpl.r_caps_to_nethctrl);
        pfres->r_caps = FW_PFVF_CMD_R_CAPS_G(word);
        pfres->wx_caps = FW_PFVF_CMD_WX_CAPS_G(word);
        pfres->nethctrl = FW_PFVF_CMD_NETHCTRL_G(word);

        return 0;
}

/* serial flash and firmware constants */
enum {
        SF_ATTEMPTS = 10,             /* max retries for SF operations */

        /* flash command opcodes */
        SF_PROG_PAGE    = 2,          /* program page */
        SF_WR_DISABLE   = 4,          /* disable writes */
        SF_RD_STATUS    = 5,          /* read status register */
        SF_WR_ENABLE    = 6,          /* enable writes */
        SF_RD_DATA_FAST = 0xb,        /* read flash */
        SF_RD_ID        = 0x9f,       /* read ID */
        SF_ERASE_SECTOR = 0xd8,       /* erase sector */
};

/**
 *      sf1_read - read data from the serial flash
 *      @adapter: the adapter
 *      @byte_cnt: number of bytes to read
 *      @cont: whether another operation will be chained
 *      @lock: whether to lock SF for PL access only
 *      @valp: where to store the read data
 *
 *      Reads up to 4 bytes of data from the serial flash.  The location of
 *      the read needs to be specified prior to calling this by issuing the
 *      appropriate commands to the serial flash.
 */
static int sf1_read(struct adapter *adapter, unsigned int byte_cnt, int cont,
                    int lock, u32 *valp)
{
        int ret;

        if (!byte_cnt || byte_cnt > 4)
                return -EINVAL;
        if (t4_read_reg(adapter, SF_OP_A) & SF_BUSY_F)
                return -EBUSY;
        t4_write_reg(adapter, SF_OP_A, SF_LOCK_V(lock) |
                     SF_CONT_V(cont) | BYTECNT_V(byte_cnt - 1));
        ret = t4_wait_op_done(adapter, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, 5);
        if (!ret)
                *valp = t4_read_reg(adapter, SF_DATA_A);
        return ret;
}

/**
 *      sf1_write - write data to the serial flash
 *      @adapter: the adapter
 *      @byte_cnt: number of bytes to write
 *      @cont: whether another operation will be chained
 *      @lock: whether to lock SF for PL access only
 *      @val: value to write
 *
 *      Writes up to 4 bytes of data to the serial flash.  The location of
 *      the write needs to be specified prior to calling this by issuing the
 *      appropriate commands to the serial flash.
 */
static int sf1_write(struct adapter *adapter, unsigned int byte_cnt, int cont,
                     int lock, u32 val)
{
        if (!byte_cnt || byte_cnt > 4)
                return -EINVAL;
        if (t4_read_reg(adapter, SF_OP_A) & SF_BUSY_F)
                return -EBUSY;
        t4_write_reg(adapter, SF_DATA_A, val);
        t4_write_reg(adapter, SF_OP_A, SF_LOCK_V(lock) |
                     SF_CONT_V(cont) | BYTECNT_V(byte_cnt - 1) | OP_V(1));
        return t4_wait_op_done(adapter, SF_OP_A, SF_BUSY_F, 0, SF_ATTEMPTS, 5);
}

/**
 *      flash_wait_op - wait for a flash operation to complete
 *      @adapter: the adapter
 *      @attempts: max number of polls of the status register
 *      @delay: delay between polls in ms
 *
 *      Wait for a flash operation to complete by polling the status register.
 */
static int flash_wait_op(struct adapter *adapter, int attempts, int delay)
{
        int ret;
        u32 status;

        while (1) {
                if ((ret = sf1_write(adapter, 1, 1, 1, SF_RD_STATUS)) != 0 ||
                    (ret = sf1_read(adapter, 1, 0, 1, &status)) != 0)
                        return ret;
                if (!(status & 1))
                        return 0;
                if (--attempts == 0)
                        return -EAGAIN;
                if (delay)
                        msleep(delay);
        }
}

/**
 *      t4_read_flash - read words from serial flash
 *      @adapter: the adapter
 *      @addr: the start address for the read
 *      @nwords: how many 32-bit words to read
 *      @data: where to store the read data
 *      @byte_oriented: whether to store data as bytes or as words
 *
 *      Read the specified number of 32-bit words from the serial flash.
 *      If @byte_oriented is set the read data is stored as a byte array
 *      (i.e., big-endian), otherwise as 32-bit words in the platform's
 *      natural endianness.
 */
int t4_read_flash(struct adapter *adapter, unsigned int addr,
                  unsigned int nwords, u32 *data, int byte_oriented)
{
        int ret;

        if (addr + nwords * sizeof(u32) > adapter->params.sf_size || (addr & 3))
                return -EINVAL;

        addr = swab32(addr) | SF_RD_DATA_FAST;

        if ((ret = sf1_write(adapter, 4, 1, 0, addr)) != 0 ||
            (ret = sf1_read(adapter, 1, 1, 0, data)) != 0)
                return ret;

        for ( ; nwords; nwords--, data++) {
                ret = sf1_read(adapter, 4, nwords > 1, nwords == 1, data);
                if (nwords == 1)
                        t4_write_reg(adapter, SF_OP_A, 0);    /* unlock SF */
                if (ret)
                        return ret;
                if (byte_oriented)
                        *data = (__force __u32)(cpu_to_be32(*data));
        }
        return 0;
}

/**
 *      t4_write_flash - write up to a page of data to the serial flash
 *      @adapter: the adapter
 *      @addr: the start address to write
 *      @n: length of data to write in bytes
 *      @data: the data to write
 *      @byte_oriented: whether to store data as bytes or as words
 *
 *      Writes up to a page of data (256 bytes) to the serial flash starting
 *      at the given address.  All the data must be written to the same page.
 *      If @byte_oriented is set the write data is stored as byte stream
 *      (i.e. matches what on disk), otherwise in big-endian.
 */
static int t4_write_flash(struct adapter *adapter, unsigned int addr,
                          unsigned int n, const u8 *data, bool byte_oriented)
{
        unsigned int i, c, left, val, offset = addr & 0xff;
        u32 buf[64];
        int ret;

        if (addr >= adapter->params.sf_size || offset + n > SF_PAGE_SIZE)
                return -EINVAL;

        val = swab32(addr) | SF_PROG_PAGE;

        if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 ||
            (ret = sf1_write(adapter, 4, 1, 1, val)) != 0)
                goto unlock;

        for (left = n; left; left -= c, data += c) {
                c = min(left, 4U);
                for (val = 0, i = 0; i < c; ++i) {
                        if (byte_oriented)
                                val = (val << 8) + data[i];
                        else
                                val = (val << 8) + data[c - i - 1];
                }

                ret = sf1_write(adapter, c, c != left, 1, val);
                if (ret)
                        goto unlock;
        }
        ret = flash_wait_op(adapter, 8, 1);
        if (ret)
                goto unlock;

        t4_write_reg(adapter, SF_OP_A, 0);    /* unlock SF */

        /* Read the page to verify the write succeeded */
        ret = t4_read_flash(adapter, addr & ~0xff, ARRAY_SIZE(buf), buf,
                            byte_oriented);
        if (ret)
                return ret;

        if (memcmp(data - n, (u8 *)buf + offset, n)) {
                dev_err(adapter->pdev_dev,
                        "failed to correctly write the flash page at %#x\n",
                        addr);
                return -EIO;
        }
        return 0;

unlock:
        t4_write_reg(adapter, SF_OP_A, 0);    /* unlock SF */
        return ret;
}

/**
 *      t4_get_fw_version - read the firmware version
 *      @adapter: the adapter
 *      @vers: where to place the version
 *
 *      Reads the FW version from flash.
 */
int t4_get_fw_version(struct adapter *adapter, u32 *vers)
{
        return t4_read_flash(adapter, FLASH_FW_START +
                             offsetof(struct fw_hdr, fw_ver), 1,
                             vers, 0);
}

/**
 *      t4_get_bs_version - read the firmware bootstrap version
 *      @adapter: the adapter
 *      @vers: where to place the version
 *
 *      Reads the FW Bootstrap version from flash.
 */
int t4_get_bs_version(struct adapter *adapter, u32 *vers)
{
        return t4_read_flash(adapter, FLASH_FWBOOTSTRAP_START +
                             offsetof(struct fw_hdr, fw_ver), 1,
                             vers, 0);
}

/**
 *      t4_get_tp_version - read the TP microcode version
 *      @adapter: the adapter
 *      @vers: where to place the version
 *
 *      Reads the TP microcode version from flash.
 */
int t4_get_tp_version(struct adapter *adapter, u32 *vers)
{
        return t4_read_flash(adapter, FLASH_FW_START +
                             offsetof(struct fw_hdr, tp_microcode_ver),
                             1, vers, 0);
}

/**
 *      t4_get_exprom_version - return the Expansion ROM version (if any)
 *      @adap: the adapter
 *      @vers: where to place the version
 *
 *      Reads the Expansion ROM header from FLASH and returns the version
 *      number (if present) through the @vers return value pointer.  We return
 *      this in the Firmware Version Format since it's convenient.  Return
 *      0 on success, -ENOENT if no Expansion ROM is present.
 */
int t4_get_exprom_version(struct adapter *adap, u32 *vers)
{
        struct exprom_header {
                unsigned char hdr_arr[16];      /* must start with 0x55aa */
                unsigned char hdr_ver[4];       /* Expansion ROM version */
        } *hdr;
        u32 exprom_header_buf[DIV_ROUND_UP(sizeof(struct exprom_header),
                                           sizeof(u32))];
        int ret;

        ret = t4_read_flash(adap, FLASH_EXP_ROM_START,
                            ARRAY_SIZE(exprom_header_buf), exprom_header_buf,
                            0);
        if (ret)
                return ret;

        hdr = (struct exprom_header *)exprom_header_buf;
        if (hdr->hdr_arr[0] != 0x55 || hdr->hdr_arr[1] != 0xaa)
                return -ENOENT;

        *vers = (FW_HDR_FW_VER_MAJOR_V(hdr->hdr_ver[0]) |
                 FW_HDR_FW_VER_MINOR_V(hdr->hdr_ver[1]) |
                 FW_HDR_FW_VER_MICRO_V(hdr->hdr_ver[2]) |
                 FW_HDR_FW_VER_BUILD_V(hdr->hdr_ver[3]));
        return 0;
}

/**
 *      t4_get_vpd_version - return the VPD version
 *      @adapter: the adapter
 *      @vers: where to place the version
 *
 *      Reads the VPD via the Firmware interface (thus this can only be called
 *      once we're ready to issue Firmware commands).  The format of the
 *      VPD version is adapter specific.  Returns 0 on success, an error on
 *      failure.
 *
 *      Note that early versions of the Firmware didn't include the ability
 *      to retrieve the VPD version, so we zero-out the return-value parameter
 *      in that case to avoid leaving it with garbage in it.
 *
 *      Also note that the Firmware will return its cached copy of the VPD
 *      Revision ID, not the actual Revision ID as written in the Serial
 *      EEPROM.  This is only an issue if a new VPD has been written and the
 *      Firmware/Chip haven't yet gone through a RESET sequence.  So it's best
 *      to defer calling this routine till after a FW_RESET_CMD has been issued
 *      if the Host Driver will be performing a full adapter initialization.
 */
int t4_get_vpd_version(struct adapter *adapter, u32 *vers)
{
        u32 vpdrev_param;
        int ret;

        vpdrev_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
                        FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_VPDREV));
        ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
                              1, &vpdrev_param, vers);
        if (ret)
                *vers = 0;
        return ret;
}

/**
 *      t4_get_scfg_version - return the Serial Configuration version
 *      @adapter: the adapter
 *      @vers: where to place the version
 *
 *      Reads the Serial Configuration Version via the Firmware interface
 *      (thus this can only be called once we're ready to issue Firmware
 *      commands).  The format of the Serial Configuration version is
 *      adapter specific.  Returns 0 on success, an error on failure.
 *
 *      Note that early versions of the Firmware didn't include the ability
 *      to retrieve the Serial Configuration version, so we zero-out the
 *      return-value parameter in that case to avoid leaving it with
 *      garbage in it.
 *
 *      Also note that the Firmware will return its cached copy of the Serial
 *      Initialization Revision ID, not the actual Revision ID as written in
 *      the Serial EEPROM.  This is only an issue if a new VPD has been written
 *      and the Firmware/Chip haven't yet gone through a RESET sequence.  So
 *      it's best to defer calling this routine till after a FW_RESET_CMD has
 *      been issued if the Host Driver will be performing a full adapter
 *      initialization.
 */
int t4_get_scfg_version(struct adapter *adapter, u32 *vers)
{
        u32 scfgrev_param;
        int ret;

        scfgrev_param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
                         FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_SCFGREV));
        ret = t4_query_params(adapter, adapter->mbox, adapter->pf, 0,
                              1, &scfgrev_param, vers);
        if (ret)
                *vers = 0;
        return ret;
}

/**
 *      t4_get_version_info - extract various chip/firmware version information
 *      @adapter: the adapter
 *
 *      Reads various chip/firmware version numbers and stores them into the
 *      adapter Adapter Parameters structure.  If any of the efforts fails
 *      the first failure will be returned, but all of the version numbers
 *      will be read.
 */
int t4_get_version_info(struct adapter *adapter)
{
        int ret = 0;

        #define FIRST_RET(__getvinfo) \
        do { \
                int __ret = __getvinfo; \
                if (__ret && !ret) \
                        ret = __ret; \
        } while (0)

        FIRST_RET(t4_get_fw_version(adapter, &adapter->params.fw_vers));
        FIRST_RET(t4_get_bs_version(adapter, &adapter->params.bs_vers));
        FIRST_RET(t4_get_tp_version(adapter, &adapter->params.tp_vers));
        FIRST_RET(t4_get_exprom_version(adapter, &adapter->params.er_vers));
        FIRST_RET(t4_get_scfg_version(adapter, &adapter->params.scfg_vers));
        FIRST_RET(t4_get_vpd_version(adapter, &adapter->params.vpd_vers));

        #undef FIRST_RET
        return ret;
}

/**
 *      t4_dump_version_info - dump all of the adapter configuration IDs
 *      @adapter: the adapter
 *
 *      Dumps all of the various bits of adapter configuration version/revision
 *      IDs information.  This is typically called at some point after
 *      t4_get_version_info() has been called.
 */
void t4_dump_version_info(struct adapter *adapter)
{
        /* Device information */
        dev_info(adapter->pdev_dev, "Chelsio %s rev %d\n",
                 adapter->params.vpd.id,
                 CHELSIO_CHIP_RELEASE(adapter->params.chip));
        dev_info(adapter->pdev_dev, "S/N: %s, P/N: %s\n",
                 adapter->params.vpd.sn, adapter->params.vpd.pn);

        /* Firmware Version */
        if (!adapter->params.fw_vers)
                dev_warn(adapter->pdev_dev, "No firmware loaded\n");
        else
                dev_info(adapter->pdev_dev, "Firmware version: %u.%u.%u.%u\n",
                         FW_HDR_FW_VER_MAJOR_G(adapter->params.fw_vers),
                         FW_HDR_FW_VER_MINOR_G(adapter->params.fw_vers),
                         FW_HDR_FW_VER_MICRO_G(adapter->params.fw_vers),
                         FW_HDR_FW_VER_BUILD_G(adapter->params.fw_vers));

        /* Bootstrap Firmware Version. (Some adapters don't have Bootstrap
         * Firmware, so dev_info() is more appropriate here.)
         */
        if (!adapter->params.bs_vers)
                dev_info(adapter->pdev_dev, "No bootstrap loaded\n");
        else
                dev_info(adapter->pdev_dev, "Bootstrap version: %u.%u.%u.%u\n",
                         FW_HDR_FW_VER_MAJOR_G(adapter->params.bs_vers),
                         FW_HDR_FW_VER_MINOR_G(adapter->params.bs_vers),
                         FW_HDR_FW_VER_MICRO_G(adapter->params.bs_vers),
                         FW_HDR_FW_VER_BUILD_G(adapter->params.bs_vers));

        /* TP Microcode Version */
        if (!adapter->params.tp_vers)
                dev_warn(adapter->pdev_dev, "No TP Microcode loaded\n");
        else
                dev_info(adapter->pdev_dev,
                         "TP Microcode version: %u.%u.%u.%u\n",
                         FW_HDR_FW_VER_MAJOR_G(adapter->params.tp_vers),
                         FW_HDR_FW_VER_MINOR_G(adapter->params.tp_vers),
                         FW_HDR_FW_VER_MICRO_G(adapter->params.tp_vers),
                         FW_HDR_FW_VER_BUILD_G(adapter->params.tp_vers));

        /* Expansion ROM version */
        if (!adapter->params.er_vers)
                dev_info(adapter->pdev_dev, "No Expansion ROM loaded\n");
        else
                dev_info(adapter->pdev_dev,
                         "Expansion ROM version: %u.%u.%u.%u\n",
                         FW_HDR_FW_VER_MAJOR_G(adapter->params.er_vers),
                         FW_HDR_FW_VER_MINOR_G(adapter->params.er_vers),
                         FW_HDR_FW_VER_MICRO_G(adapter->params.er_vers),
                         FW_HDR_FW_VER_BUILD_G(adapter->params.er_vers));

        /* Serial Configuration version */
        dev_info(adapter->pdev_dev, "Serial Configuration version: %#x\n",
                 adapter->params.scfg_vers);

        /* VPD Version */
        dev_info(adapter->pdev_dev, "VPD version: %#x\n",
                 adapter->params.vpd_vers);
}

/**
 *      t4_check_fw_version - check if the FW is supported with this driver
 *      @adap: the adapter
 *
 *      Checks if an adapter's FW is compatible with the driver.  Returns 0
 *      if there's exact match, a negative error if the version could not be
 *      read or there's a major version mismatch
 */
int t4_check_fw_version(struct adapter *adap)
{
        int i, ret, major, minor, micro;
        int exp_major, exp_minor, exp_micro;
        unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip);

        ret = t4_get_fw_version(adap, &adap->params.fw_vers);
        /* Try multiple times before returning error */
        for (i = 0; (ret == -EBUSY || ret == -EAGAIN) && i < 3; i++)
                ret = t4_get_fw_version(adap, &adap->params.fw_vers);

        if (ret)
                return ret;

        major = FW_HDR_FW_VER_MAJOR_G(adap->params.fw_vers);
        minor = FW_HDR_FW_VER_MINOR_G(adap->params.fw_vers);
        micro = FW_HDR_FW_VER_MICRO_G(adap->params.fw_vers);

        switch (chip_version) {
        case CHELSIO_T4:
                exp_major = T4FW_MIN_VERSION_MAJOR;
                exp_minor = T4FW_MIN_VERSION_MINOR;
                exp_micro = T4FW_MIN_VERSION_MICRO;
                break;
        case CHELSIO_T5:
                exp_major = T5FW_MIN_VERSION_MAJOR;
                exp_minor = T5FW_MIN_VERSION_MINOR;
                exp_micro = T5FW_MIN_VERSION_MICRO;
                break;
        case CHELSIO_T6:
                exp_major = T6FW_MIN_VERSION_MAJOR;
                exp_minor = T6FW_MIN_VERSION_MINOR;
                exp_micro = T6FW_MIN_VERSION_MICRO;
                break;
        default:
                dev_err(adap->pdev_dev, "Unsupported chip type, %x\n",
                        adap->chip);
                return -EINVAL;
        }

        if (major < exp_major || (major == exp_major && minor < exp_minor) ||
            (major == exp_major && minor == exp_minor && micro < exp_micro)) {
                dev_err(adap->pdev_dev,
                        "Card has firmware version %u.%u.%u, minimum "
                        "supported firmware is %u.%u.%u.\n", major, minor,
                        micro, exp_major, exp_minor, exp_micro);
                return -EFAULT;
        }
        return 0;
}

/* Is the given firmware API compatible with the one the driver was compiled
 * with?
 */
static int fw_compatible(const struct fw_hdr *hdr1, const struct fw_hdr *hdr2)
{

        /* short circuit if it's the exact same firmware version */
        if (hdr1->chip == hdr2->chip && hdr1->fw_ver == hdr2->fw_ver)
                return 1;

#define SAME_INTF(x) (hdr1->intfver_##x == hdr2->intfver_##x)
        if (hdr1->chip == hdr2->chip && SAME_INTF(nic) && SAME_INTF(vnic) &&
            SAME_INTF(ri) && SAME_INTF(iscsi) && SAME_INTF(fcoe))
                return 1;
#undef SAME_INTF

        return 0;
}

/* The firmware in the filesystem is usable, but should it be installed?
 * This routine explains itself in detail if it indicates the filesystem
 * firmware should be installed.
 */
static int should_install_fs_fw(struct adapter *adap, int card_fw_usable,
                                int k, int c)
{
        const char *reason;

        if (!card_fw_usable) {
                reason = "incompatible or unusable";
                goto install;
        }

        if (k > c) {
                reason = "older than the version supported with this driver";
                goto install;
        }

        return 0;

install:
        dev_err(adap->pdev_dev, "firmware on card (%u.%u.%u.%u) is %s, "
                "installing firmware %u.%u.%u.%u on card.\n",
                FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c),
                FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c), reason,
                FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k),
                FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k));

        return 1;
}

int t4_prep_fw(struct adapter *adap, struct fw_info *fw_info,
               const u8 *fw_data, unsigned int fw_size,
               struct fw_hdr *card_fw, enum dev_state state,
               int *reset)
{
        int ret, card_fw_usable, fs_fw_usable;
        const struct fw_hdr *fs_fw;
        const struct fw_hdr *drv_fw;

        drv_fw = &fw_info->fw_hdr;

        /* Read the header of the firmware on the card */
        ret = t4_read_flash(adap, FLASH_FW_START,
                            sizeof(*card_fw) / sizeof(uint32_t),
                            (uint32_t *)card_fw, 1);
        if (ret == 0) {
                card_fw_usable = fw_compatible(drv_fw, (const void *)card_fw);
        } else {
                dev_err(adap->pdev_dev,
                        "Unable to read card's firmware header: %d\n", ret);
                card_fw_usable = 0;
        }

        if (fw_data != NULL) {
                fs_fw = (const void *)fw_data;
                fs_fw_usable = fw_compatible(drv_fw, fs_fw);
        } else {
                fs_fw = NULL;
                fs_fw_usable = 0;
        }

        if (card_fw_usable && card_fw->fw_ver == drv_fw->fw_ver &&
            (!fs_fw_usable || fs_fw->fw_ver == drv_fw->fw_ver)) {
                /* Common case: the firmware on the card is an exact match and
                 * the filesystem one is an exact match too, or the filesystem
                 * one is absent/incompatible.
                 */
        } else if (fs_fw_usable && state == DEV_STATE_UNINIT &&
                   should_install_fs_fw(adap, card_fw_usable,
                                        be32_to_cpu(fs_fw->fw_ver),
                                        be32_to_cpu(card_fw->fw_ver))) {
                ret = t4_fw_upgrade(adap, adap->mbox, fw_data,
                                    fw_size, 0);
                if (ret != 0) {
                        dev_err(adap->pdev_dev,
                                "failed to install firmware: %d\n", ret);
                        goto bye;
                }

                /* Installed successfully, update the cached header too. */
                *card_fw = *fs_fw;
                card_fw_usable = 1;
                *reset = 0;     /* already reset as part of load_fw */
        }

        if (!card_fw_usable) {
                uint32_t d, c, k;

                d = be32_to_cpu(drv_fw->fw_ver);
                c = be32_to_cpu(card_fw->fw_ver);
                k = fs_fw ? be32_to_cpu(fs_fw->fw_ver) : 0;

                dev_err(adap->pdev_dev, "Cannot find a usable firmware: "
                        "chip state %d, "
                        "driver compiled with %d.%d.%d.%d, "
                        "card has %d.%d.%d.%d, filesystem has %d.%d.%d.%d\n",
                        state,
                        FW_HDR_FW_VER_MAJOR_G(d), FW_HDR_FW_VER_MINOR_G(d),
                        FW_HDR_FW_VER_MICRO_G(d), FW_HDR_FW_VER_BUILD_G(d),
                        FW_HDR_FW_VER_MAJOR_G(c), FW_HDR_FW_VER_MINOR_G(c),
                        FW_HDR_FW_VER_MICRO_G(c), FW_HDR_FW_VER_BUILD_G(c),
                        FW_HDR_FW_VER_MAJOR_G(k), FW_HDR_FW_VER_MINOR_G(k),
                        FW_HDR_FW_VER_MICRO_G(k), FW_HDR_FW_VER_BUILD_G(k));
                ret = -EINVAL;
                goto bye;
        }

        /* We're using whatever's on the card and it's known to be good. */
        adap->params.fw_vers = be32_to_cpu(card_fw->fw_ver);
        adap->params.tp_vers = be32_to_cpu(card_fw->tp_microcode_ver);

bye:
        return ret;
}

/**
 *      t4_flash_erase_sectors - erase a range of flash sectors
 *      @adapter: the adapter
 *      @start: the first sector to erase
 *      @end: the last sector to erase
 *
 *      Erases the sectors in the given inclusive range.
 */
static int t4_flash_erase_sectors(struct adapter *adapter, int start, int end)
{
        int ret = 0;

        if (end >= adapter->params.sf_nsec)
                return -EINVAL;

        while (start <= end) {
                if ((ret = sf1_write(adapter, 1, 0, 1, SF_WR_ENABLE)) != 0 ||
                    (ret = sf1_write(adapter, 4, 0, 1,
                                     SF_ERASE_SECTOR | (start << 8))) != 0 ||
                    (ret = flash_wait_op(adapter, 14, 500)) != 0) {
                        dev_err(adapter->pdev_dev,
                                "erase of flash sector %d failed, error %d\n",
                                start, ret);
                        break;
                }
                start++;
        }
        t4_write_reg(adapter, SF_OP_A, 0);    /* unlock SF */
        return ret;
}

/**
 *      t4_flash_cfg_addr - return the address of the flash configuration file
 *      @adapter: the adapter
 *
 *      Return the address within the flash where the Firmware Configuration
 *      File is stored.
 */
unsigned int t4_flash_cfg_addr(struct adapter *adapter)
{
        if (adapter->params.sf_size == 0x100000)
                return FLASH_FPGA_CFG_START;
        else
                return FLASH_CFG_START;
}

/* Return TRUE if the specified firmware matches the adapter.  I.e. T4
 * firmware for T4 adapters, T5 firmware for T5 adapters, etc.  We go ahead
 * and emit an error message for mismatched firmware to save our caller the
 * effort ...
 */
static bool t4_fw_matches_chip(const struct adapter *adap,
                               const struct fw_hdr *hdr)
{
        /* The expression below will return FALSE for any unsupported adapter
         * which will keep us "honest" in the future ...
         */
        if ((is_t4(adap->params.chip) && hdr->chip == FW_HDR_CHIP_T4) ||
            (is_t5(adap->params.chip) && hdr->chip == FW_HDR_CHIP_T5) ||
            (is_t6(adap->params.chip) && hdr->chip == FW_HDR_CHIP_T6))
                return true;

        dev_err(adap->pdev_dev,
                "FW image (%d) is not suitable for this adapter (%d)\n",
                hdr->chip, CHELSIO_CHIP_VERSION(adap->params.chip));
        return false;
}

/**
 *      t4_load_fw - download firmware
 *      @adap: the adapter
 *      @fw_data: the firmware image to write
 *      @size: image size
 *
 *      Write the supplied firmware image to the card's serial flash.
 */
int t4_load_fw(struct adapter *adap, const u8 *fw_data, unsigned int size)
{
        u32 csum;
        int ret, addr;
        unsigned int i;
        u8 first_page[SF_PAGE_SIZE];
        const __be32 *p = (const __be32 *)fw_data;
        const struct fw_hdr *hdr = (const struct fw_hdr *)fw_data;
        unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec;
        unsigned int fw_start_sec = FLASH_FW_START_SEC;
        unsigned int fw_size = FLASH_FW_MAX_SIZE;
        unsigned int fw_start = FLASH_FW_START;

        if (!size) {
                dev_err(adap->pdev_dev, "FW image has no data\n");
                return -EINVAL;
        }
        if (size & 511) {
                dev_err(adap->pdev_dev,
                        "FW image size not multiple of 512 bytes\n");
                return -EINVAL;
        }
        if ((unsigned int)be16_to_cpu(hdr->len512) * 512 != size) {
                dev_err(adap->pdev_dev,
                        "FW image size differs from size in FW header\n");
                return -EINVAL;
        }
        if (size > fw_size) {
                dev_err(adap->pdev_dev, "FW image too large, max is %u bytes\n",
                        fw_size);
                return -EFBIG;
        }
        if (!t4_fw_matches_chip(adap, hdr))
                return -EINVAL;

        for (csum = 0, i = 0; i < size / sizeof(csum); i++)
                csum += be32_to_cpu(p[i]);

        if (csum != 0xffffffff) {
                dev_err(adap->pdev_dev,
                        "corrupted firmware image, checksum %#x\n", csum);
                return -EINVAL;
        }

        i = DIV_ROUND_UP(size, sf_sec_size);        /* # of sectors spanned */
        ret = t4_flash_erase_sectors(adap, fw_start_sec, fw_start_sec + i - 1);
        if (ret)
                goto out;

        /*
         * We write the correct version at the end so the driver can see a bad
         * version if the FW write fails.  Start by writing a copy of the
         * first page with a bad version.
         */
        memcpy(first_page, fw_data, SF_PAGE_SIZE);
        ((struct fw_hdr *)first_page)->fw_ver = cpu_to_be32(0xffffffff);
        ret = t4_write_flash(adap, fw_start, SF_PAGE_SIZE, first_page, true);
        if (ret)
                goto out;

        addr = fw_start;
        for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
                addr += SF_PAGE_SIZE;
                fw_data += SF_PAGE_SIZE;
                ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, fw_data, true);
                if (ret)
                        goto out;
        }

        ret = t4_write_flash(adap, fw_start + offsetof(struct fw_hdr, fw_ver),
                             sizeof(hdr->fw_ver), (const u8 *)&hdr->fw_ver,
                             true);
out:
        if (ret)
                dev_err(adap->pdev_dev, "firmware download failed, error %d\n",
                        ret);
        else
                ret = t4_get_fw_version(adap, &adap->params.fw_vers);
        return ret;
}

/**
 *      t4_phy_fw_ver - return current PHY firmware version
 *      @adap: the adapter
 *      @phy_fw_ver: return value buffer for PHY firmware version
 *
 *      Returns the current version of external PHY firmware on the
 *      adapter.
 */
int t4_phy_fw_ver(struct adapter *adap, int *phy_fw_ver)
{
        u32 param, val;
        int ret;

        param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
                 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) |
                 FW_PARAMS_PARAM_Y_V(adap->params.portvec) |
                 FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_VERSION));
        ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1,
                              &param, &val);
        if (ret)
                return ret;
        *phy_fw_ver = val;
        return 0;
}

/**
 *      t4_load_phy_fw - download port PHY firmware
 *      @adap: the adapter
 *      @win: the PCI-E Memory Window index to use for t4_memory_rw()
 *      @phy_fw_version: function to check PHY firmware versions
 *      @phy_fw_data: the PHY firmware image to write
 *      @phy_fw_size: image size
 *
 *      Transfer the specified PHY firmware to the adapter.  If a non-NULL
 *      @phy_fw_version is supplied, then it will be used to determine if
 *      it's necessary to perform the transfer by comparing the version
 *      of any existing adapter PHY firmware with that of the passed in
 *      PHY firmware image.
 *
 *      A negative error number will be returned if an error occurs.  If
 *      version number support is available and there's no need to upgrade
 *      the firmware, 0 will be returned.  If firmware is successfully
 *      transferred to the adapter, 1 will be returned.
 *
 *      NOTE: some adapters only have local RAM to store the PHY firmware.  As
 *      a result, a RESET of the adapter would cause that RAM to lose its
 *      contents.  Thus, loading PHY firmware on such adapters must happen
 *      after any FW_RESET_CMDs ...
 */
int t4_load_phy_fw(struct adapter *adap, int win,
                   int (*phy_fw_version)(const u8 *, size_t),
                   const u8 *phy_fw_data, size_t phy_fw_size)
{
        int cur_phy_fw_ver = 0, new_phy_fw_vers = 0;
        unsigned long mtype = 0, maddr = 0;
        u32 param, val;
        int ret;

        /* If we have version number support, then check to see if the adapter
         * already has up-to-date PHY firmware loaded.
         */
        if (phy_fw_version) {
                new_phy_fw_vers = phy_fw_version(phy_fw_data, phy_fw_size);
                ret = t4_phy_fw_ver(adap, &cur_phy_fw_ver);
                if (ret < 0)
                        return ret;

                if (cur_phy_fw_ver >= new_phy_fw_vers) {
                        CH_WARN(adap, "PHY Firmware already up-to-date, "
                                "version %#x\n", cur_phy_fw_ver);
                        return 0;
                }
        }

        /* Ask the firmware where it wants us to copy the PHY firmware image.
         * The size of the file requires a special version of the READ command
         * which will pass the file size via the values field in PARAMS_CMD and
         * retrieve the return value from firmware and place it in the same
         * buffer values
         */
        param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
                 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) |
                 FW_PARAMS_PARAM_Y_V(adap->params.portvec) |
                 FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_DOWNLOAD));
        val = phy_fw_size;
        ret = t4_query_params_rw(adap, adap->mbox, adap->pf, 0, 1,
                                 &param, &val, 1, true);
        if (ret < 0)
                return ret;
        mtype = val >> 8;
        maddr = (val & 0xff) << 16;

        /* Copy the supplied PHY Firmware image to the adapter memory location
         * allocated by the adapter firmware.
         */
        spin_lock_bh(&adap->win0_lock);
        ret = t4_memory_rw(adap, win, mtype, maddr,
                           phy_fw_size, (__be32 *)phy_fw_data,
                           T4_MEMORY_WRITE);
        spin_unlock_bh(&adap->win0_lock);
        if (ret)
                return ret;

        /* Tell the firmware that the PHY firmware image has been written to
         * RAM and it can now start copying it over to the PHYs.  The chip
         * firmware will RESET the affected PHYs as part of this operation
         * leaving them running the new PHY firmware image.
         */
        param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
                 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_PHYFW) |
                 FW_PARAMS_PARAM_Y_V(adap->params.portvec) |
                 FW_PARAMS_PARAM_Z_V(FW_PARAMS_PARAM_DEV_PHYFW_DOWNLOAD));
        ret = t4_set_params_timeout(adap, adap->mbox, adap->pf, 0, 1,
                                    &param, &val, 30000);
        if (ret)
                return ret;

        /* If we have version number support, then check to see that the new
         * firmware got loaded properly.
         */
        if (phy_fw_version) {
                ret = t4_phy_fw_ver(adap, &cur_phy_fw_ver);
                if (ret < 0)
                        return ret;

                if (cur_phy_fw_ver != new_phy_fw_vers) {
                        CH_WARN(adap, "PHY Firmware did not update: "
                                "version on adapter %#x, "
                                "version flashed %#x\n",
                                cur_phy_fw_ver, new_phy_fw_vers);
                        return -ENXIO;
                }
        }

        return 1;
}

/**
 *      t4_fwcache - firmware cache operation
 *      @adap: the adapter
 *      @op  : the operation (flush or flush and invalidate)
 */
int t4_fwcache(struct adapter *adap, enum fw_params_param_dev_fwcache op)
{
        struct fw_params_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_vfn =
                cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) |
                            FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
                            FW_PARAMS_CMD_PFN_V(adap->pf) |
                            FW_PARAMS_CMD_VFN_V(0));
        c.retval_len16 = cpu_to_be32(FW_LEN16(c));
        c.param[0].mnem =
                cpu_to_be32(FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
                            FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_FWCACHE));
        c.param[0].val = cpu_to_be32(op);

        return t4_wr_mbox(adap, adap->mbox, &c, sizeof(c), NULL);
}

void t4_cim_read_pif_la(struct adapter *adap, u32 *pif_req, u32 *pif_rsp,
                        unsigned int *pif_req_wrptr,
                        unsigned int *pif_rsp_wrptr)
{
        int i, j;
        u32 cfg, val, req, rsp;

        cfg = t4_read_reg(adap, CIM_DEBUGCFG_A);
        if (cfg & LADBGEN_F)
                t4_write_reg(adap, CIM_DEBUGCFG_A, cfg ^ LADBGEN_F);

        val = t4_read_reg(adap, CIM_DEBUGSTS_A);
        req = POLADBGWRPTR_G(val);
        rsp = PILADBGWRPTR_G(val);
        if (pif_req_wrptr)
                *pif_req_wrptr = req;
        if (pif_rsp_wrptr)
                *pif_rsp_wrptr = rsp;

        for (i = 0; i < CIM_PIFLA_SIZE; i++) {
                for (j = 0; j < 6; j++) {
                        t4_write_reg(adap, CIM_DEBUGCFG_A, POLADBGRDPTR_V(req) |
                                     PILADBGRDPTR_V(rsp));
                        *pif_req++ = t4_read_reg(adap, CIM_PO_LA_DEBUGDATA_A);
                        *pif_rsp++ = t4_read_reg(adap, CIM_PI_LA_DEBUGDATA_A);
                        req++;
                        rsp++;
                }
                req = (req + 2) & POLADBGRDPTR_M;
                rsp = (rsp + 2) & PILADBGRDPTR_M;
        }
        t4_write_reg(adap, CIM_DEBUGCFG_A, cfg);
}

void t4_cim_read_ma_la(struct adapter *adap, u32 *ma_req, u32 *ma_rsp)
{
        u32 cfg;
        int i, j, idx;

        cfg = t4_read_reg(adap, CIM_DEBUGCFG_A);
        if (cfg & LADBGEN_F)
                t4_write_reg(adap, CIM_DEBUGCFG_A, cfg ^ LADBGEN_F);

        for (i = 0; i < CIM_MALA_SIZE; i++) {
                for (j = 0; j < 5; j++) {
                        idx = 8 * i + j;
                        t4_write_reg(adap, CIM_DEBUGCFG_A, POLADBGRDPTR_V(idx) |
                                     PILADBGRDPTR_V(idx));
                        *ma_req++ = t4_read_reg(adap, CIM_PO_LA_MADEBUGDATA_A);
                        *ma_rsp++ = t4_read_reg(adap, CIM_PI_LA_MADEBUGDATA_A);
                }
        }
        t4_write_reg(adap, CIM_DEBUGCFG_A, cfg);
}

void t4_ulprx_read_la(struct adapter *adap, u32 *la_buf)
{
        unsigned int i, j;

        for (i = 0; i < 8; i++) {
                u32 *p = la_buf + i;

                t4_write_reg(adap, ULP_RX_LA_CTL_A, i);
                j = t4_read_reg(adap, ULP_RX_LA_WRPTR_A);
                t4_write_reg(adap, ULP_RX_LA_RDPTR_A, j);
                for (j = 0; j < ULPRX_LA_SIZE; j++, p += 8)
                        *p = t4_read_reg(adap, ULP_RX_LA_RDDATA_A);
        }
}

/* The ADVERT_MASK is used to mask out all of the Advertised Firmware Port
 * Capabilities which we control with separate controls -- see, for instance,
 * Pause Frames and Forward Error Correction.  In order to determine what the
 * full set of Advertised Port Capabilities are, the base Advertised Port
 * Capabilities (masked by ADVERT_MASK) must be combined with the Advertised
 * Port Capabilities associated with those other controls.  See
 * t4_link_acaps() for how this is done.
 */
#define ADVERT_MASK (FW_PORT_CAP32_SPEED_V(FW_PORT_CAP32_SPEED_M) | \
                     FW_PORT_CAP32_ANEG)

/**
 *      fwcaps16_to_caps32 - convert 16-bit Port Capabilities to 32-bits
 *      @caps16: a 16-bit Port Capabilities value
 *
 *      Returns the equivalent 32-bit Port Capabilities value.
 */
static fw_port_cap32_t fwcaps16_to_caps32(fw_port_cap16_t caps16)
{
        fw_port_cap32_t caps32 = 0;

        #define CAP16_TO_CAP32(__cap) \
                do { \
                        if (caps16 & FW_PORT_CAP_##__cap) \
                                caps32 |= FW_PORT_CAP32_##__cap; \
                } while (0)

        CAP16_TO_CAP32(SPEED_100M);
        CAP16_TO_CAP32(SPEED_1G);
        CAP16_TO_CAP32(SPEED_25G);
        CAP16_TO_CAP32(SPEED_10G);
        CAP16_TO_CAP32(SPEED_40G);
        CAP16_TO_CAP32(SPEED_100G);
        CAP16_TO_CAP32(FC_RX);
        CAP16_TO_CAP32(FC_TX);
        CAP16_TO_CAP32(ANEG);
        CAP16_TO_CAP32(FORCE_PAUSE);
        CAP16_TO_CAP32(MDIAUTO);
        CAP16_TO_CAP32(MDISTRAIGHT);
        CAP16_TO_CAP32(FEC_RS);
        CAP16_TO_CAP32(FEC_BASER_RS);
        CAP16_TO_CAP32(802_3_PAUSE);
        CAP16_TO_CAP32(802_3_ASM_DIR);

        #undef CAP16_TO_CAP32

        return caps32;
}

/**
 *      fwcaps32_to_caps16 - convert 32-bit Port Capabilities to 16-bits
 *      @caps32: a 32-bit Port Capabilities value
 *
 *      Returns the equivalent 16-bit Port Capabilities value.  Note that
 *      not all 32-bit Port Capabilities can be represented in the 16-bit
 *      Port Capabilities and some fields/values may not make it.
 */
static fw_port_cap16_t fwcaps32_to_caps16(fw_port_cap32_t caps32)
{
        fw_port_cap16_t caps16 = 0;

        #define CAP32_TO_CAP16(__cap) \
                do { \
                        if (caps32 & FW_PORT_CAP32_##__cap) \
                                caps16 |= FW_PORT_CAP_##__cap; \
                } while (0)

        CAP32_TO_CAP16(SPEED_100M);
        CAP32_TO_CAP16(SPEED_1G);
        CAP32_TO_CAP16(SPEED_10G);
        CAP32_TO_CAP16(SPEED_25G);
        CAP32_TO_CAP16(SPEED_40G);
        CAP32_TO_CAP16(SPEED_100G);
        CAP32_TO_CAP16(FC_RX);
        CAP32_TO_CAP16(FC_TX);
        CAP32_TO_CAP16(802_3_PAUSE);
        CAP32_TO_CAP16(802_3_ASM_DIR);
        CAP32_TO_CAP16(ANEG);
        CAP32_TO_CAP16(FORCE_PAUSE);
        CAP32_TO_CAP16(MDIAUTO);
        CAP32_TO_CAP16(MDISTRAIGHT);
        CAP32_TO_CAP16(FEC_RS);
        CAP32_TO_CAP16(FEC_BASER_RS);

        #undef CAP32_TO_CAP16

        return caps16;
}

/* Translate Firmware Port Capabilities Pause specification to Common Code */
static inline enum cc_pause fwcap_to_cc_pause(fw_port_cap32_t fw_pause)
{
        enum cc_pause cc_pause = 0;

        if (fw_pause & FW_PORT_CAP32_FC_RX)
                cc_pause |= PAUSE_RX;
        if (fw_pause & FW_PORT_CAP32_FC_TX)
                cc_pause |= PAUSE_TX;

        return cc_pause;
}

/* Translate Common Code Pause specification into Firmware Port Capabilities */
static inline fw_port_cap32_t cc_to_fwcap_pause(enum cc_pause cc_pause)
{
        /* Translate orthogonal RX/TX Pause Controls for L1 Configure
         * commands, etc.
         */
        fw_port_cap32_t fw_pause = 0;

        if (cc_pause & PAUSE_RX)
                fw_pause |= FW_PORT_CAP32_FC_RX;
        if (cc_pause & PAUSE_TX)
                fw_pause |= FW_PORT_CAP32_FC_TX;
        if (!(cc_pause & PAUSE_AUTONEG))
                fw_pause |= FW_PORT_CAP32_FORCE_PAUSE;

        /* Translate orthogonal Pause controls into IEEE 802.3 Pause,
         * Asymmetrical Pause for use in reporting to upper layer OS code, etc.
         * Note that these bits are ignored in L1 Configure commands.
         */
        if (cc_pause & PAUSE_RX) {
                if (cc_pause & PAUSE_TX)
                        fw_pause |= FW_PORT_CAP32_802_3_PAUSE;
                else
                        fw_pause |= FW_PORT_CAP32_802_3_ASM_DIR |
                                    FW_PORT_CAP32_802_3_PAUSE;
        } else if (cc_pause & PAUSE_TX) {
                fw_pause |= FW_PORT_CAP32_802_3_ASM_DIR;
        }

        return fw_pause;
}

/* Translate Firmware Forward Error Correction specification to Common Code */
static inline enum cc_fec fwcap_to_cc_fec(fw_port_cap32_t fw_fec)
{
        enum cc_fec cc_fec = 0;

        if (fw_fec & FW_PORT_CAP32_FEC_RS)
                cc_fec |= FEC_RS;
        if (fw_fec & FW_PORT_CAP32_FEC_BASER_RS)
                cc_fec |= FEC_BASER_RS;

        return cc_fec;
}

/* Translate Common Code Forward Error Correction specification to Firmware */
static inline fw_port_cap32_t cc_to_fwcap_fec(enum cc_fec cc_fec)
{
        fw_port_cap32_t fw_fec = 0;

        if (cc_fec & FEC_RS)
                fw_fec |= FW_PORT_CAP32_FEC_RS;
        if (cc_fec & FEC_BASER_RS)
                fw_fec |= FW_PORT_CAP32_FEC_BASER_RS;

        return fw_fec;
}

/**
 *      t4_link_acaps - compute Link Advertised Port Capabilities
 *      @adapter: the adapter
 *      @port: the Port ID
 *      @lc: the Port's Link Configuration
 *
 *      Synthesize the Advertised Port Capabilities we'll be using based on
 *      the base Advertised Port Capabilities (which have been filtered by
 *      ADVERT_MASK) plus the individual controls for things like Pause
 *      Frames, Forward Error Correction, MDI, etc.
 */
fw_port_cap32_t t4_link_acaps(struct adapter *adapter, unsigned int port,
                              struct link_config *lc)
{
        fw_port_cap32_t fw_fc, fw_fec, acaps;
        unsigned int fw_mdi;
        char cc_fec;

        fw_mdi = (FW_PORT_CAP32_MDI_V(FW_PORT_CAP32_MDI_AUTO) & lc->pcaps);

        /* Convert driver coding of Pause Frame Flow Control settings into the
         * Firmware's API.
         */
        fw_fc = cc_to_fwcap_pause(lc->requested_fc);

        /* Convert Common Code Forward Error Control settings into the
         * Firmware's API.  If the current Requested FEC has "Automatic"
         * (IEEE 802.3) specified, then we use whatever the Firmware
         * sent us as part of its IEEE 802.3-based interpretation of
         * the Transceiver Module EPROM FEC parameters.  Otherwise we
         * use whatever is in the current Requested FEC settings.
         */
        if (lc->requested_fec & FEC_AUTO)
                cc_fec = fwcap_to_cc_fec(lc->def_acaps);
        else
                cc_fec = lc->requested_fec;
        fw_fec = cc_to_fwcap_fec(cc_fec);

        /* Figure out what our Requested Port Capabilities are going to be.
         * Note parallel structure in t4_handle_get_port_info() and
         * init_link_config().
         */
        if (!(lc->pcaps & FW_PORT_CAP32_ANEG)) {
                acaps = lc->acaps | fw_fc | fw_fec;
                lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
                lc->fec = cc_fec;
        } else if (lc->autoneg == AUTONEG_DISABLE) {
                acaps = lc->speed_caps | fw_fc | fw_fec | fw_mdi;
                lc->fc = lc->requested_fc & ~PAUSE_AUTONEG;
                lc->fec = cc_fec;
        } else {
                acaps = lc->acaps | fw_fc | fw_fec | fw_mdi;
        }

        /* Some Requested Port Capabilities are trivially wrong if they exceed
         * the Physical Port Capabilities.  We can check that here and provide
         * moderately useful feedback in the system log.
         *
         * Note that older Firmware doesn't have FW_PORT_CAP32_FORCE_PAUSE, so
         * we need to exclude this from this check in order to maintain
         * compatibility ...
         */
        if ((acaps & ~lc->pcaps) & ~FW_PORT_CAP32_FORCE_PAUSE) {
                dev_err(adapter->pdev_dev, "Requested Port Capabilities %#x exceed Physical Port Capabilities %#x\n",
                        acaps, lc->pcaps);
                return -EINVAL;
        }

        return acaps;
}

/**
 *      t4_link_l1cfg_core - apply link configuration to MAC/PHY
 *      @adapter: the adapter
 *      @mbox: the Firmware Mailbox to use
 *      @port: the Port ID
 *      @lc: the Port's Link Configuration
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *      @timeout: time to wait for command to finish before timing out
 *              (negative implies @sleep_ok=false)
 *
 *      Set up a port's MAC and PHY according to a desired link configuration.
 *      - If the PHY can auto-negotiate first decide what to advertise, then
 *        enable/disable auto-negotiation as desired, and reset.
 *      - If the PHY does not auto-negotiate just reset it.
 *      - If auto-negotiation is off set the MAC to the proper speed/duplex/FC,
 *        otherwise do it later based on the outcome of auto-negotiation.
 */
int t4_link_l1cfg_core(struct adapter *adapter, unsigned int mbox,
                       unsigned int port, struct link_config *lc,
                       u8 sleep_ok, int timeout)
{
        unsigned int fw_caps = adapter->params.fw_caps_support;
        struct fw_port_cmd cmd;
        fw_port_cap32_t rcap;
        int ret;

        if (!(lc->pcaps & FW_PORT_CAP32_ANEG) &&
            lc->autoneg == AUTONEG_ENABLE) {
                return -EINVAL;
        }

        /* Compute our Requested Port Capabilities and send that on to the
         * Firmware.
         */
        rcap = t4_link_acaps(adapter, port, lc);
        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
                                       FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
                                       FW_PORT_CMD_PORTID_V(port));
        cmd.action_to_len16 =
                cpu_to_be32(FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
                                                 ? FW_PORT_ACTION_L1_CFG
                                                 : FW_PORT_ACTION_L1_CFG32) |
                                                 FW_LEN16(cmd));
        if (fw_caps == FW_CAPS16)
                cmd.u.l1cfg.rcap = cpu_to_be32(fwcaps32_to_caps16(rcap));
        else
                cmd.u.l1cfg32.rcap32 = cpu_to_be32(rcap);

        ret = t4_wr_mbox_meat_timeout(adapter, mbox, &cmd, sizeof(cmd), NULL,
                                      sleep_ok, timeout);

        /* Unfortunately, even if the Requested Port Capabilities "fit" within
         * the Physical Port Capabilities, some combinations of features may
         * still not be legal.  For example, 40Gb/s and Reed-Solomon Forward
         * Error Correction.  So if the Firmware rejects the L1 Configure
         * request, flag that here.
         */
        if (ret) {
                dev_err(adapter->pdev_dev,
                        "Requested Port Capabilities %#x rejected, error %d\n",
                        rcap, -ret);
                return ret;
        }
        return 0;
}

/**
 *      t4_restart_aneg - restart autonegotiation
 *      @adap: the adapter
 *      @mbox: mbox to use for the FW command
 *      @port: the port id
 *
 *      Restarts autonegotiation for the selected port.
 */
int t4_restart_aneg(struct adapter *adap, unsigned int mbox, unsigned int port)
{
        unsigned int fw_caps = adap->params.fw_caps_support;
        struct fw_port_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
                                     FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
                                     FW_PORT_CMD_PORTID_V(port));
        c.action_to_len16 =
                cpu_to_be32(FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
                                                 ? FW_PORT_ACTION_L1_CFG
                                                 : FW_PORT_ACTION_L1_CFG32) |
                            FW_LEN16(c));
        if (fw_caps == FW_CAPS16)
                c.u.l1cfg.rcap = cpu_to_be32(FW_PORT_CAP_ANEG);
        else
                c.u.l1cfg32.rcap32 = cpu_to_be32(FW_PORT_CAP32_ANEG);
        return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}

typedef void (*int_handler_t)(struct adapter *adap);

struct intr_info {
        unsigned int mask;       /* bits to check in interrupt status */
        const char *msg;         /* message to print or NULL */
        short stat_idx;          /* stat counter to increment or -1 */
        unsigned short fatal;    /* whether the condition reported is fatal */
        int_handler_t int_handler; /* platform-specific int handler */
};

/**
 *      t4_handle_intr_status - table driven interrupt handler
 *      @adapter: the adapter that generated the interrupt
 *      @reg: the interrupt status register to process
 *      @acts: table of interrupt actions
 *
 *      A table driven interrupt handler that applies a set of masks to an
 *      interrupt status word and performs the corresponding actions if the
 *      interrupts described by the mask have occurred.  The actions include
 *      optionally emitting a warning or alert message.  The table is terminated
 *      by an entry specifying mask 0.  Returns the number of fatal interrupt
 *      conditions.
 */
static int t4_handle_intr_status(struct adapter *adapter, unsigned int reg,
                                 const struct intr_info *acts)
{
        int fatal = 0;
        unsigned int mask = 0;
        unsigned int status = t4_read_reg(adapter, reg);

        for ( ; acts->mask; ++acts) {
                if (!(status & acts->mask))
                        continue;
                if (acts->fatal) {
                        fatal++;
                        dev_alert(adapter->pdev_dev, "%s (0x%x)\n", acts->msg,
                                  status & acts->mask);
                } else if (acts->msg && printk_ratelimit())
                        dev_warn(adapter->pdev_dev, "%s (0x%x)\n", acts->msg,
                                 status & acts->mask);
                if (acts->int_handler)
                        acts->int_handler(adapter);
                mask |= acts->mask;
        }
        status &= mask;
        if (status)                           /* clear processed interrupts */
                t4_write_reg(adapter, reg, status);
        return fatal;
}

/*
 * Interrupt handler for the PCIE module.
 */
static void pcie_intr_handler(struct adapter *adapter)
{
        static const struct intr_info sysbus_intr_info[] = {
                { RNPP_F, "RXNP array parity error", -1, 1 },
                { RPCP_F, "RXPC array parity error", -1, 1 },
                { RCIP_F, "RXCIF array parity error", -1, 1 },
                { RCCP_F, "Rx completions control array parity error", -1, 1 },
                { RFTP_F, "RXFT array parity error", -1, 1 },
                { 0 }
        };
        static const struct intr_info pcie_port_intr_info[] = {
                { TPCP_F, "TXPC array parity error", -1, 1 },
                { TNPP_F, "TXNP array parity error", -1, 1 },
                { TFTP_F, "TXFT array parity error", -1, 1 },
                { TCAP_F, "TXCA array parity error", -1, 1 },
                { TCIP_F, "TXCIF array parity error", -1, 1 },
                { RCAP_F, "RXCA array parity error", -1, 1 },
                { OTDD_F, "outbound request TLP discarded", -1, 1 },
                { RDPE_F, "Rx data parity error", -1, 1 },
                { TDUE_F, "Tx uncorrectable data error", -1, 1 },
                { 0 }
        };
        static const struct intr_info pcie_intr_info[] = {
                { MSIADDRLPERR_F, "MSI AddrL parity error", -1, 1 },
                { MSIADDRHPERR_F, "MSI AddrH parity error", -1, 1 },
                { MSIDATAPERR_F, "MSI data parity error", -1, 1 },
                { MSIXADDRLPERR_F, "MSI-X AddrL parity error", -1, 1 },
                { MSIXADDRHPERR_F, "MSI-X AddrH parity error", -1, 1 },
                { MSIXDATAPERR_F, "MSI-X data parity error", -1, 1 },
                { MSIXDIPERR_F, "MSI-X DI parity error", -1, 1 },
                { PIOCPLPERR_F, "PCI PIO completion FIFO parity error", -1, 1 },
                { PIOREQPERR_F, "PCI PIO request FIFO parity error", -1, 1 },
                { TARTAGPERR_F, "PCI PCI target tag FIFO parity error", -1, 1 },
                { CCNTPERR_F, "PCI CMD channel count parity error", -1, 1 },
                { CREQPERR_F, "PCI CMD channel request parity error", -1, 1 },
                { CRSPPERR_F, "PCI CMD channel response parity error", -1, 1 },
                { DCNTPERR_F, "PCI DMA channel count parity error", -1, 1 },
                { DREQPERR_F, "PCI DMA channel request parity error", -1, 1 },
                { DRSPPERR_F, "PCI DMA channel response parity error", -1, 1 },
                { HCNTPERR_F, "PCI HMA channel count parity error", -1, 1 },
                { HREQPERR_F, "PCI HMA channel request parity error", -1, 1 },
                { HRSPPERR_F, "PCI HMA channel response parity error", -1, 1 },
                { CFGSNPPERR_F, "PCI config snoop FIFO parity error", -1, 1 },
                { FIDPERR_F, "PCI FID parity error", -1, 1 },
                { INTXCLRPERR_F, "PCI INTx clear parity error", -1, 1 },
                { MATAGPERR_F, "PCI MA tag parity error", -1, 1 },
                { PIOTAGPERR_F, "PCI PIO tag parity error", -1, 1 },
                { RXCPLPERR_F, "PCI Rx completion parity error", -1, 1 },
                { RXWRPERR_F, "PCI Rx write parity error", -1, 1 },
                { RPLPERR_F, "PCI replay buffer parity error", -1, 1 },
                { PCIESINT_F, "PCI core secondary fault", -1, 1 },
                { PCIEPINT_F, "PCI core primary fault", -1, 1 },
                { UNXSPLCPLERR_F, "PCI unexpected split completion error",
                  -1, 0 },
                { 0 }
        };

        static struct intr_info t5_pcie_intr_info[] = {
                { MSTGRPPERR_F, "Master Response Read Queue parity error",
                  -1, 1 },
                { MSTTIMEOUTPERR_F, "Master Timeout FIFO parity error", -1, 1 },
                { MSIXSTIPERR_F, "MSI-X STI SRAM parity error", -1, 1 },
                { MSIXADDRLPERR_F, "MSI-X AddrL parity error", -1, 1 },
                { MSIXADDRHPERR_F, "MSI-X AddrH parity error", -1, 1 },
                { MSIXDATAPERR_F, "MSI-X data parity error", -1, 1 },
                { MSIXDIPERR_F, "MSI-X DI parity error", -1, 1 },
                { PIOCPLGRPPERR_F, "PCI PIO completion Group FIFO parity error",
                  -1, 1 },
                { PIOREQGRPPERR_F, "PCI PIO request Group FIFO parity error",
                  -1, 1 },
                { TARTAGPERR_F, "PCI PCI target tag FIFO parity error", -1, 1 },
                { MSTTAGQPERR_F, "PCI master tag queue parity error", -1, 1 },
                { CREQPERR_F, "PCI CMD channel request parity error", -1, 1 },
                { CRSPPERR_F, "PCI CMD channel response parity error", -1, 1 },
                { DREQWRPERR_F, "PCI DMA channel write request parity error",
                  -1, 1 },
                { DREQPERR_F, "PCI DMA channel request parity error", -1, 1 },
                { DRSPPERR_F, "PCI DMA channel response parity error", -1, 1 },
                { HREQWRPERR_F, "PCI HMA channel count parity error", -1, 1 },
                { HREQPERR_F, "PCI HMA channel request parity error", -1, 1 },
                { HRSPPERR_F, "PCI HMA channel response parity error", -1, 1 },
                { CFGSNPPERR_F, "PCI config snoop FIFO parity error", -1, 1 },
                { FIDPERR_F, "PCI FID parity error", -1, 1 },
                { VFIDPERR_F, "PCI INTx clear parity error", -1, 1 },
                { MAGRPPERR_F, "PCI MA group FIFO parity error", -1, 1 },
                { PIOTAGPERR_F, "PCI PIO tag parity error", -1, 1 },
                { IPRXHDRGRPPERR_F, "PCI IP Rx header group parity error",
                  -1, 1 },
                { IPRXDATAGRPPERR_F, "PCI IP Rx data group parity error",
                  -1, 1 },
                { RPLPERR_F, "PCI IP replay buffer parity error", -1, 1 },
                { IPSOTPERR_F, "PCI IP SOT buffer parity error", -1, 1 },
                { TRGT1GRPPERR_F, "PCI TRGT1 group FIFOs parity error", -1, 1 },
                { READRSPERR_F, "Outbound read error", -1, 0 },
                { 0 }
        };

        int fat;

        if (is_t4(adapter->params.chip))
                fat = t4_handle_intr_status(adapter,
                                PCIE_CORE_UTL_SYSTEM_BUS_AGENT_STATUS_A,
                                sysbus_intr_info) +
                        t4_handle_intr_status(adapter,
                                        PCIE_CORE_UTL_PCI_EXPRESS_PORT_STATUS_A,
                                        pcie_port_intr_info) +
                        t4_handle_intr_status(adapter, PCIE_INT_CAUSE_A,
                                              pcie_intr_info);
        else
                fat = t4_handle_intr_status(adapter, PCIE_INT_CAUSE_A,
                                            t5_pcie_intr_info);

        if (fat)
                t4_fatal_err(adapter);
}

/*
 * TP interrupt handler.
 */
static void tp_intr_handler(struct adapter *adapter)
{
        static const struct intr_info tp_intr_info[] = {
                { 0x3fffffff, "TP parity error", -1, 1 },
                { FLMTXFLSTEMPTY_F, "TP out of Tx pages", -1, 1 },
                { 0 }
        };

        if (t4_handle_intr_status(adapter, TP_INT_CAUSE_A, tp_intr_info))
                t4_fatal_err(adapter);
}

/*
 * SGE interrupt handler.
 */
static void sge_intr_handler(struct adapter *adapter)
{
        u32 v = 0, perr;
        u32 err;

        static const struct intr_info sge_intr_info[] = {
                { ERR_CPL_EXCEED_IQE_SIZE_F,
                  "SGE received CPL exceeding IQE size", -1, 1 },
                { ERR_INVALID_CIDX_INC_F,
                  "SGE GTS CIDX increment too large", -1, 0 },
                { ERR_CPL_OPCODE_0_F, "SGE received 0-length CPL", -1, 0 },
                { DBFIFO_LP_INT_F, NULL, -1, 0, t4_db_full },
                { ERR_DATA_CPL_ON_HIGH_QID1_F | ERR_DATA_CPL_ON_HIGH_QID0_F,
                  "SGE IQID > 1023 received CPL for FL", -1, 0 },
                { ERR_BAD_DB_PIDX3_F, "SGE DBP 3 pidx increment too large", -1,
                  0 },
                { ERR_BAD_DB_PIDX2_F, "SGE DBP 2 pidx increment too large", -1,
                  0 },
                { ERR_BAD_DB_PIDX1_F, "SGE DBP 1 pidx increment too large", -1,
                  0 },
                { ERR_BAD_DB_PIDX0_F, "SGE DBP 0 pidx increment too large", -1,
                  0 },
                { ERR_ING_CTXT_PRIO_F,
                  "SGE too many priority ingress contexts", -1, 0 },
                { INGRESS_SIZE_ERR_F, "SGE illegal ingress QID", -1, 0 },
                { EGRESS_SIZE_ERR_F, "SGE illegal egress QID", -1, 0 },
                { 0 }
        };

        static struct intr_info t4t5_sge_intr_info[] = {
                { ERR_DROPPED_DB_F, NULL, -1, 0, t4_db_dropped },
                { DBFIFO_HP_INT_F, NULL, -1, 0, t4_db_full },
                { ERR_EGR_CTXT_PRIO_F,
                  "SGE too many priority egress contexts", -1, 0 },
                { 0 }
        };

        perr = t4_read_reg(adapter, SGE_INT_CAUSE1_A);
        if (perr) {
                v |= perr;
                dev_alert(adapter->pdev_dev, "SGE Cause1 Parity Error %#x\n",
                          perr);
        }

        perr = t4_read_reg(adapter, SGE_INT_CAUSE2_A);
        if (perr) {
                v |= perr;
                dev_alert(adapter->pdev_dev, "SGE Cause2 Parity Error %#x\n",
                          perr);
        }

        if (CHELSIO_CHIP_VERSION(adapter->params.chip) >= CHELSIO_T5) {
                perr = t4_read_reg(adapter, SGE_INT_CAUSE5_A);
                /* Parity error (CRC) for err_T_RxCRC is trivial, ignore it */
                perr &= ~ERR_T_RXCRC_F;
                if (perr) {
                        v |= perr;
                        dev_alert(adapter->pdev_dev,
                                  "SGE Cause5 Parity Error %#x\n", perr);
                }
        }

        v |= t4_handle_intr_status(adapter, SGE_INT_CAUSE3_A, sge_intr_info);
        if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
                v |= t4_handle_intr_status(adapter, SGE_INT_CAUSE3_A,
                                           t4t5_sge_intr_info);

        err = t4_read_reg(adapter, SGE_ERROR_STATS_A);
        if (err & ERROR_QID_VALID_F) {
                dev_err(adapter->pdev_dev, "SGE error for queue %u\n",
                        ERROR_QID_G(err));
                if (err & UNCAPTURED_ERROR_F)
                        dev_err(adapter->pdev_dev,
                                "SGE UNCAPTURED_ERROR set (clearing)\n");
                t4_write_reg(adapter, SGE_ERROR_STATS_A, ERROR_QID_VALID_F |
                             UNCAPTURED_ERROR_F);
        }

        if (v != 0)
                t4_fatal_err(adapter);
}

#define CIM_OBQ_INTR (OBQULP0PARERR_F | OBQULP1PARERR_F | OBQULP2PARERR_F |\
                      OBQULP3PARERR_F | OBQSGEPARERR_F | OBQNCSIPARERR_F)
#define CIM_IBQ_INTR (IBQTP0PARERR_F | IBQTP1PARERR_F | IBQULPPARERR_F |\
                      IBQSGEHIPARERR_F | IBQSGELOPARERR_F | IBQNCSIPARERR_F)

/*
 * CIM interrupt handler.
 */
static void cim_intr_handler(struct adapter *adapter)
{
        static const struct intr_info cim_intr_info[] = {
                { PREFDROPINT_F, "CIM control register prefetch drop", -1, 1 },
                { CIM_OBQ_INTR, "CIM OBQ parity error", -1, 1 },
                { CIM_IBQ_INTR, "CIM IBQ parity error", -1, 1 },
                { MBUPPARERR_F, "CIM mailbox uP parity error", -1, 1 },
                { MBHOSTPARERR_F, "CIM mailbox host parity error", -1, 1 },
                { TIEQINPARERRINT_F, "CIM TIEQ outgoing parity error", -1, 1 },
                { TIEQOUTPARERRINT_F, "CIM TIEQ incoming parity error", -1, 1 },
                { TIMER0INT_F, "CIM TIMER0 interrupt", -1, 1 },
                { 0 }
        };
        static const struct intr_info cim_upintr_info[] = {
                { RSVDSPACEINT_F, "CIM reserved space access", -1, 1 },
                { ILLTRANSINT_F, "CIM illegal transaction", -1, 1 },
                { ILLWRINT_F, "CIM illegal write", -1, 1 },
                { ILLRDINT_F, "CIM illegal read", -1, 1 },
                { ILLRDBEINT_F, "CIM illegal read BE", -1, 1 },
                { ILLWRBEINT_F, "CIM illegal write BE", -1, 1 },
                { SGLRDBOOTINT_F, "CIM single read from boot space", -1, 1 },
                { SGLWRBOOTINT_F, "CIM single write to boot space", -1, 1 },
                { BLKWRBOOTINT_F, "CIM block write to boot space", -1, 1 },
                { SGLRDFLASHINT_F, "CIM single read from flash space", -1, 1 },
                { SGLWRFLASHINT_F, "CIM single write to flash space", -1, 1 },
                { BLKWRFLASHINT_F, "CIM block write to flash space", -1, 1 },
                { SGLRDEEPROMINT_F, "CIM single EEPROM read", -1, 1 },
                { SGLWREEPROMINT_F, "CIM single EEPROM write", -1, 1 },
                { BLKRDEEPROMINT_F, "CIM block EEPROM read", -1, 1 },
                { BLKWREEPROMINT_F, "CIM block EEPROM write", -1, 1 },
                { SGLRDCTLINT_F, "CIM single read from CTL space", -1, 1 },
                { SGLWRCTLINT_F, "CIM single write to CTL space", -1, 1 },
                { BLKRDCTLINT_F, "CIM block read from CTL space", -1, 1 },
                { BLKWRCTLINT_F, "CIM block write to CTL space", -1, 1 },
                { SGLRDPLINT_F, "CIM single read from PL space", -1, 1 },
                { SGLWRPLINT_F, "CIM single write to PL space", -1, 1 },
                { BLKRDPLINT_F, "CIM block read from PL space", -1, 1 },
                { BLKWRPLINT_F, "CIM block write to PL space", -1, 1 },
                { REQOVRLOOKUPINT_F, "CIM request FIFO overwrite", -1, 1 },
                { RSPOVRLOOKUPINT_F, "CIM response FIFO overwrite", -1, 1 },
                { TIMEOUTINT_F, "CIM PIF timeout", -1, 1 },
                { TIMEOUTMAINT_F, "CIM PIF MA timeout", -1, 1 },
                { 0 }
        };

        u32 val, fw_err;
        int fat;

        fw_err = t4_read_reg(adapter, PCIE_FW_A);
        if (fw_err & PCIE_FW_ERR_F)
                t4_report_fw_error(adapter);

        /* When the Firmware detects an internal error which normally
         * wouldn't raise a Host Interrupt, it forces a CIM Timer0 interrupt
         * in order to make sure the Host sees the Firmware Crash.  So
         * if we have a Timer0 interrupt and don't see a Firmware Crash,
         * ignore the Timer0 interrupt.
         */

        val = t4_read_reg(adapter, CIM_HOST_INT_CAUSE_A);
        if (val & TIMER0INT_F)
                if (!(fw_err & PCIE_FW_ERR_F) ||
                    (PCIE_FW_EVAL_G(fw_err) != PCIE_FW_EVAL_CRASH))
                        t4_write_reg(adapter, CIM_HOST_INT_CAUSE_A,
                                     TIMER0INT_F);

        fat = t4_handle_intr_status(adapter, CIM_HOST_INT_CAUSE_A,
                                    cim_intr_info) +
              t4_handle_intr_status(adapter, CIM_HOST_UPACC_INT_CAUSE_A,
                                    cim_upintr_info);
        if (fat)
                t4_fatal_err(adapter);
}

/*
 * ULP RX interrupt handler.
 */
static void ulprx_intr_handler(struct adapter *adapter)
{
        static const struct intr_info ulprx_intr_info[] = {
                { 0x1800000, "ULPRX context error", -1, 1 },
                { 0x7fffff, "ULPRX parity error", -1, 1 },
                { 0 }
        };

        if (t4_handle_intr_status(adapter, ULP_RX_INT_CAUSE_A, ulprx_intr_info))
                t4_fatal_err(adapter);
}

/*
 * ULP TX interrupt handler.
 */
static void ulptx_intr_handler(struct adapter *adapter)
{
        static const struct intr_info ulptx_intr_info[] = {
                { PBL_BOUND_ERR_CH3_F, "ULPTX channel 3 PBL out of bounds", -1,
                  0 },
                { PBL_BOUND_ERR_CH2_F, "ULPTX channel 2 PBL out of bounds", -1,
                  0 },
                { PBL_BOUND_ERR_CH1_F, "ULPTX channel 1 PBL out of bounds", -1,
                  0 },
                { PBL_BOUND_ERR_CH0_F, "ULPTX channel 0 PBL out of bounds", -1,
                  0 },
                { 0xfffffff, "ULPTX parity error", -1, 1 },
                { 0 }
        };

        if (t4_handle_intr_status(adapter, ULP_TX_INT_CAUSE_A, ulptx_intr_info))
                t4_fatal_err(adapter);
}

/*
 * PM TX interrupt handler.
 */
static void pmtx_intr_handler(struct adapter *adapter)
{
        static const struct intr_info pmtx_intr_info[] = {
                { PCMD_LEN_OVFL0_F, "PMTX channel 0 pcmd too large", -1, 1 },
                { PCMD_LEN_OVFL1_F, "PMTX channel 1 pcmd too large", -1, 1 },
                { PCMD_LEN_OVFL2_F, "PMTX channel 2 pcmd too large", -1, 1 },
                { ZERO_C_CMD_ERROR_F, "PMTX 0-length pcmd", -1, 1 },
                { PMTX_FRAMING_ERROR_F, "PMTX framing error", -1, 1 },
                { OESPI_PAR_ERROR_F, "PMTX oespi parity error", -1, 1 },
                { DB_OPTIONS_PAR_ERROR_F, "PMTX db_options parity error",
                  -1, 1 },
                { ICSPI_PAR_ERROR_F, "PMTX icspi parity error", -1, 1 },
                { PMTX_C_PCMD_PAR_ERROR_F, "PMTX c_pcmd parity error", -1, 1},
                { 0 }
        };

        if (t4_handle_intr_status(adapter, PM_TX_INT_CAUSE_A, pmtx_intr_info))
                t4_fatal_err(adapter);
}

/*
 * PM RX interrupt handler.
 */
static void pmrx_intr_handler(struct adapter *adapter)
{
        static const struct intr_info pmrx_intr_info[] = {
                { ZERO_E_CMD_ERROR_F, "PMRX 0-length pcmd", -1, 1 },
                { PMRX_FRAMING_ERROR_F, "PMRX framing error", -1, 1 },
                { OCSPI_PAR_ERROR_F, "PMRX ocspi parity error", -1, 1 },
                { DB_OPTIONS_PAR_ERROR_F, "PMRX db_options parity error",
                  -1, 1 },
                { IESPI_PAR_ERROR_F, "PMRX iespi parity error", -1, 1 },
                { PMRX_E_PCMD_PAR_ERROR_F, "PMRX e_pcmd parity error", -1, 1},
                { 0 }
        };

        if (t4_handle_intr_status(adapter, PM_RX_INT_CAUSE_A, pmrx_intr_info))
                t4_fatal_err(adapter);
}

/*
 * CPL switch interrupt handler.
 */
static void cplsw_intr_handler(struct adapter *adapter)
{
        static const struct intr_info cplsw_intr_info[] = {
                { CIM_OP_MAP_PERR_F, "CPLSW CIM op_map parity error", -1, 1 },
                { CIM_OVFL_ERROR_F, "CPLSW CIM overflow", -1, 1 },
                { TP_FRAMING_ERROR_F, "CPLSW TP framing error", -1, 1 },
                { SGE_FRAMING_ERROR_F, "CPLSW SGE framing error", -1, 1 },
                { CIM_FRAMING_ERROR_F, "CPLSW CIM framing error", -1, 1 },
                { ZERO_SWITCH_ERROR_F, "CPLSW no-switch error", -1, 1 },
                { 0 }
        };

        if (t4_handle_intr_status(adapter, CPL_INTR_CAUSE_A, cplsw_intr_info))
                t4_fatal_err(adapter);
}

/*
 * LE interrupt handler.
 */
static void le_intr_handler(struct adapter *adap)
{
        enum chip_type chip = CHELSIO_CHIP_VERSION(adap->params.chip);
        static const struct intr_info le_intr_info[] = {
                { LIPMISS_F, "LE LIP miss", -1, 0 },
                { LIP0_F, "LE 0 LIP error", -1, 0 },
                { PARITYERR_F, "LE parity error", -1, 1 },
                { UNKNOWNCMD_F, "LE unknown command", -1, 1 },
                { REQQPARERR_F, "LE request queue parity error", -1, 1 },
                { 0 }
        };

        static struct intr_info t6_le_intr_info[] = {
                { T6_LIPMISS_F, "LE LIP miss", -1, 0 },
                { T6_LIP0_F, "LE 0 LIP error", -1, 0 },
                { CMDTIDERR_F, "LE cmd tid error", -1, 1 },
                { TCAMINTPERR_F, "LE parity error", -1, 1 },
                { T6_UNKNOWNCMD_F, "LE unknown command", -1, 1 },
                { SSRAMINTPERR_F, "LE request queue parity error", -1, 1 },
                { HASHTBLMEMCRCERR_F, "LE hash table mem crc error", -1, 0 },
                { 0 }
        };

        if (t4_handle_intr_status(adap, LE_DB_INT_CAUSE_A,
                                  (chip <= CHELSIO_T5) ?
                                  le_intr_info : t6_le_intr_info))
                t4_fatal_err(adap);
}

/*
 * MPS interrupt handler.
 */
static void mps_intr_handler(struct adapter *adapter)
{
        static const struct intr_info mps_rx_intr_info[] = {
                { 0xffffff, "MPS Rx parity error", -1, 1 },
                { 0 }
        };
        static const struct intr_info mps_tx_intr_info[] = {
                { TPFIFO_V(TPFIFO_M), "MPS Tx TP FIFO parity error", -1, 1 },
                { NCSIFIFO_F, "MPS Tx NC-SI FIFO parity error", -1, 1 },
                { TXDATAFIFO_V(TXDATAFIFO_M), "MPS Tx data FIFO parity error",
                  -1, 1 },
                { TXDESCFIFO_V(TXDESCFIFO_M), "MPS Tx desc FIFO parity error",
                  -1, 1 },
                { BUBBLE_F, "MPS Tx underflow", -1, 1 },
                { SECNTERR_F, "MPS Tx SOP/EOP error", -1, 1 },
                { FRMERR_F, "MPS Tx framing error", -1, 1 },
                { 0 }
        };
        static const struct intr_info t6_mps_tx_intr_info[] = {
                { TPFIFO_V(TPFIFO_M), "MPS Tx TP FIFO parity error", -1, 1 },
                { NCSIFIFO_F, "MPS Tx NC-SI FIFO parity error", -1, 1 },
                { TXDATAFIFO_V(TXDATAFIFO_M), "MPS Tx data FIFO parity error",
                  -1, 1 },
                { TXDESCFIFO_V(TXDESCFIFO_M), "MPS Tx desc FIFO parity error",
                  -1, 1 },
                /* MPS Tx Bubble is normal for T6 */
                { SECNTERR_F, "MPS Tx SOP/EOP error", -1, 1 },
                { FRMERR_F, "MPS Tx framing error", -1, 1 },
                { 0 }
        };
        static const struct intr_info mps_trc_intr_info[] = {
                { FILTMEM_V(FILTMEM_M), "MPS TRC filter parity error", -1, 1 },
                { PKTFIFO_V(PKTFIFO_M), "MPS TRC packet FIFO parity error",
                  -1, 1 },
                { MISCPERR_F, "MPS TRC misc parity error", -1, 1 },
                { 0 }
        };
        static const struct intr_info mps_stat_sram_intr_info[] = {
                { 0x1fffff, "MPS statistics SRAM parity error", -1, 1 },
                { 0 }
        };
        static const struct intr_info mps_stat_tx_intr_info[] = {
                { 0xfffff, "MPS statistics Tx FIFO parity error", -1, 1 },
                { 0 }
        };
        static const struct intr_info mps_stat_rx_intr_info[] = {
                { 0xffffff, "MPS statistics Rx FIFO parity error", -1, 1 },
                { 0 }
        };
        static const struct intr_info mps_cls_intr_info[] = {
                { MATCHSRAM_F, "MPS match SRAM parity error", -1, 1 },
                { MATCHTCAM_F, "MPS match TCAM parity error", -1, 1 },
                { HASHSRAM_F, "MPS hash SRAM parity error", -1, 1 },
                { 0 }
        };

        int fat;

        fat = t4_handle_intr_status(adapter, MPS_RX_PERR_INT_CAUSE_A,
                                    mps_rx_intr_info) +
              t4_handle_intr_status(adapter, MPS_TX_INT_CAUSE_A,
                                    is_t6(adapter->params.chip)
                                    ? t6_mps_tx_intr_info
                                    : mps_tx_intr_info) +
              t4_handle_intr_status(adapter, MPS_TRC_INT_CAUSE_A,
                                    mps_trc_intr_info) +
              t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_SRAM_A,
                                    mps_stat_sram_intr_info) +
              t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_TX_FIFO_A,
                                    mps_stat_tx_intr_info) +
              t4_handle_intr_status(adapter, MPS_STAT_PERR_INT_CAUSE_RX_FIFO_A,
                                    mps_stat_rx_intr_info) +
              t4_handle_intr_status(adapter, MPS_CLS_INT_CAUSE_A,
                                    mps_cls_intr_info);

        t4_write_reg(adapter, MPS_INT_CAUSE_A, 0);
        t4_read_reg(adapter, MPS_INT_CAUSE_A);                    /* flush */
        if (fat)
                t4_fatal_err(adapter);
}

#define MEM_INT_MASK (PERR_INT_CAUSE_F | ECC_CE_INT_CAUSE_F | \
                      ECC_UE_INT_CAUSE_F)

/*
 * EDC/MC interrupt handler.
 */
static void mem_intr_handler(struct adapter *adapter, int idx)
{
        static const char name[4][7] = { "EDC0", "EDC1", "MC/MC0", "MC1" };

        unsigned int addr, cnt_addr, v;

        if (idx <= MEM_EDC1) {
                addr = EDC_REG(EDC_INT_CAUSE_A, idx);
                cnt_addr = EDC_REG(EDC_ECC_STATUS_A, idx);
        } else if (idx == MEM_MC) {
                if (is_t4(adapter->params.chip)) {
                        addr = MC_INT_CAUSE_A;
                        cnt_addr = MC_ECC_STATUS_A;
                } else {
                        addr = MC_P_INT_CAUSE_A;
                        cnt_addr = MC_P_ECC_STATUS_A;
                }
        } else {
                addr = MC_REG(MC_P_INT_CAUSE_A, 1);
                cnt_addr = MC_REG(MC_P_ECC_STATUS_A, 1);
        }

        v = t4_read_reg(adapter, addr) & MEM_INT_MASK;
        if (v & PERR_INT_CAUSE_F)
                dev_alert(adapter->pdev_dev, "%s FIFO parity error\n",
                          name[idx]);
        if (v & ECC_CE_INT_CAUSE_F) {
                u32 cnt = ECC_CECNT_G(t4_read_reg(adapter, cnt_addr));

                t4_edc_err_read(adapter, idx);

                t4_write_reg(adapter, cnt_addr, ECC_CECNT_V(ECC_CECNT_M));
                if (printk_ratelimit())
                        dev_warn(adapter->pdev_dev,
                                 "%u %s correctable ECC data error%s\n",
                                 cnt, name[idx], cnt > 1 ? "s" : "");
        }
        if (v & ECC_UE_INT_CAUSE_F)
                dev_alert(adapter->pdev_dev,
                          "%s uncorrectable ECC data error\n", name[idx]);

        t4_write_reg(adapter, addr, v);
        if (v & (PERR_INT_CAUSE_F | ECC_UE_INT_CAUSE_F))
                t4_fatal_err(adapter);
}

/*
 * MA interrupt handler.
 */
static void ma_intr_handler(struct adapter *adap)
{
        u32 v, status = t4_read_reg(adap, MA_INT_CAUSE_A);

        if (status & MEM_PERR_INT_CAUSE_F) {
                dev_alert(adap->pdev_dev,
                          "MA parity error, parity status %#x\n",
                          t4_read_reg(adap, MA_PARITY_ERROR_STATUS1_A));
                if (is_t5(adap->params.chip))
                        dev_alert(adap->pdev_dev,
                                  "MA parity error, parity status %#x\n",
                                  t4_read_reg(adap,
                                              MA_PARITY_ERROR_STATUS2_A));
        }
        if (status & MEM_WRAP_INT_CAUSE_F) {
                v = t4_read_reg(adap, MA_INT_WRAP_STATUS_A);
                dev_alert(adap->pdev_dev, "MA address wrap-around error by "
                          "client %u to address %#x\n",
                          MEM_WRAP_CLIENT_NUM_G(v),
                          MEM_WRAP_ADDRESS_G(v) << 4);
        }
        t4_write_reg(adap, MA_INT_CAUSE_A, status);
        t4_fatal_err(adap);
}

/*
 * SMB interrupt handler.
 */
static void smb_intr_handler(struct adapter *adap)
{
        static const struct intr_info smb_intr_info[] = {
                { MSTTXFIFOPARINT_F, "SMB master Tx FIFO parity error", -1, 1 },
                { MSTRXFIFOPARINT_F, "SMB master Rx FIFO parity error", -1, 1 },
                { SLVFIFOPARINT_F, "SMB slave FIFO parity error", -1, 1 },
                { 0 }
        };

        if (t4_handle_intr_status(adap, SMB_INT_CAUSE_A, smb_intr_info))
                t4_fatal_err(adap);
}

/*
 * NC-SI interrupt handler.
 */
static void ncsi_intr_handler(struct adapter *adap)
{
        static const struct intr_info ncsi_intr_info[] = {
                { CIM_DM_PRTY_ERR_F, "NC-SI CIM parity error", -1, 1 },
                { MPS_DM_PRTY_ERR_F, "NC-SI MPS parity error", -1, 1 },
                { TXFIFO_PRTY_ERR_F, "NC-SI Tx FIFO parity error", -1, 1 },
                { RXFIFO_PRTY_ERR_F, "NC-SI Rx FIFO parity error", -1, 1 },
                { 0 }
        };

        if (t4_handle_intr_status(adap, NCSI_INT_CAUSE_A, ncsi_intr_info))
                t4_fatal_err(adap);
}

/*
 * XGMAC interrupt handler.
 */
static void xgmac_intr_handler(struct adapter *adap, int port)
{
        u32 v, int_cause_reg;

        if (is_t4(adap->params.chip))
                int_cause_reg = PORT_REG(port, XGMAC_PORT_INT_CAUSE_A);
        else
                int_cause_reg = T5_PORT_REG(port, MAC_PORT_INT_CAUSE_A);

        v = t4_read_reg(adap, int_cause_reg);

        v &= TXFIFO_PRTY_ERR_F | RXFIFO_PRTY_ERR_F;
        if (!v)
                return;

        if (v & TXFIFO_PRTY_ERR_F)
                dev_alert(adap->pdev_dev, "XGMAC %d Tx FIFO parity error\n",
                          port);
        if (v & RXFIFO_PRTY_ERR_F)
                dev_alert(adap->pdev_dev, "XGMAC %d Rx FIFO parity error\n",
                          port);
        t4_write_reg(adap, PORT_REG(port, XGMAC_PORT_INT_CAUSE_A), v);
        t4_fatal_err(adap);
}

/*
 * PL interrupt handler.
 */
static void pl_intr_handler(struct adapter *adap)
{
        static const struct intr_info pl_intr_info[] = {
                { FATALPERR_F, "T4 fatal parity error", -1, 1 },
                { PERRVFID_F, "PL VFID_MAP parity error", -1, 1 },
                { 0 }
        };

        if (t4_handle_intr_status(adap, PL_PL_INT_CAUSE_A, pl_intr_info))
                t4_fatal_err(adap);
}

#define PF_INTR_MASK (PFSW_F)
#define GLBL_INTR_MASK (CIM_F | MPS_F | PL_F | PCIE_F | MC_F | EDC0_F | \
                EDC1_F | LE_F | TP_F | MA_F | PM_TX_F | PM_RX_F | ULP_RX_F | \
                CPL_SWITCH_F | SGE_F | ULP_TX_F | SF_F)

/**
 *      t4_slow_intr_handler - control path interrupt handler
 *      @adapter: the adapter
 *
 *      T4 interrupt handler for non-data global interrupt events, e.g., errors.
 *      The designation 'slow' is because it involves register reads, while
 *      data interrupts typically don't involve any MMIOs.
 */
int t4_slow_intr_handler(struct adapter *adapter)
{
        /* There are rare cases where a PL_INT_CAUSE bit may end up getting
         * set when the corresponding PL_INT_ENABLE bit isn't set.  It's
         * easiest just to mask that case here.
         */
        u32 raw_cause = t4_read_reg(adapter, PL_INT_CAUSE_A);
        u32 enable = t4_read_reg(adapter, PL_INT_ENABLE_A);
        u32 cause = raw_cause & enable;

        if (!(cause & GLBL_INTR_MASK))
                return 0;
        if (cause & CIM_F)
                cim_intr_handler(adapter);
        if (cause & MPS_F)
                mps_intr_handler(adapter);
        if (cause & NCSI_F)
                ncsi_intr_handler(adapter);
        if (cause & PL_F)
                pl_intr_handler(adapter);
        if (cause & SMB_F)
                smb_intr_handler(adapter);
        if (cause & XGMAC0_F)
                xgmac_intr_handler(adapter, 0);
        if (cause & XGMAC1_F)
                xgmac_intr_handler(adapter, 1);
        if (cause & XGMAC_KR0_F)
                xgmac_intr_handler(adapter, 2);
        if (cause & XGMAC_KR1_F)
                xgmac_intr_handler(adapter, 3);
        if (cause & PCIE_F)
                pcie_intr_handler(adapter);
        if (cause & MC_F)
                mem_intr_handler(adapter, MEM_MC);
        if (is_t5(adapter->params.chip) && (cause & MC1_F))
                mem_intr_handler(adapter, MEM_MC1);
        if (cause & EDC0_F)
                mem_intr_handler(adapter, MEM_EDC0);
        if (cause & EDC1_F)
                mem_intr_handler(adapter, MEM_EDC1);
        if (cause & LE_F)
                le_intr_handler(adapter);
        if (cause & TP_F)
                tp_intr_handler(adapter);
        if (cause & MA_F)
                ma_intr_handler(adapter);
        if (cause & PM_TX_F)
                pmtx_intr_handler(adapter);
        if (cause & PM_RX_F)
                pmrx_intr_handler(adapter);
        if (cause & ULP_RX_F)
                ulprx_intr_handler(adapter);
        if (cause & CPL_SWITCH_F)
                cplsw_intr_handler(adapter);
        if (cause & SGE_F)
                sge_intr_handler(adapter);
        if (cause & ULP_TX_F)
                ulptx_intr_handler(adapter);

        /* Clear the interrupts just processed for which we are the master. */
        t4_write_reg(adapter, PL_INT_CAUSE_A, raw_cause & GLBL_INTR_MASK);
        (void)t4_read_reg(adapter, PL_INT_CAUSE_A); /* flush */
        return 1;
}

/**
 *      t4_intr_enable - enable interrupts
 *      @adapter: the adapter whose interrupts should be enabled
 *
 *      Enable PF-specific interrupts for the calling function and the top-level
 *      interrupt concentrator for global interrupts.  Interrupts are already
 *      enabled at each module, here we just enable the roots of the interrupt
 *      hierarchies.
 *
 *      Note: this function should be called only when the driver manages
 *      non PF-specific interrupts from the various HW modules.  Only one PCI
 *      function at a time should be doing this.
 */
void t4_intr_enable(struct adapter *adapter)
{
        u32 val = 0;
        u32 whoami = t4_read_reg(adapter, PL_WHOAMI_A);
        u32 pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
                        SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami);

        if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5)
                val = ERR_DROPPED_DB_F | ERR_EGR_CTXT_PRIO_F | DBFIFO_HP_INT_F;
        t4_write_reg(adapter, SGE_INT_ENABLE3_A, ERR_CPL_EXCEED_IQE_SIZE_F |
                     ERR_INVALID_CIDX_INC_F | ERR_CPL_OPCODE_0_F |
                     ERR_DATA_CPL_ON_HIGH_QID1_F | INGRESS_SIZE_ERR_F |
                     ERR_DATA_CPL_ON_HIGH_QID0_F | ERR_BAD_DB_PIDX3_F |
                     ERR_BAD_DB_PIDX2_F | ERR_BAD_DB_PIDX1_F |
                     ERR_BAD_DB_PIDX0_F | ERR_ING_CTXT_PRIO_F |
                     DBFIFO_LP_INT_F | EGRESS_SIZE_ERR_F | val);
        t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE_A), PF_INTR_MASK);
        t4_set_reg_field(adapter, PL_INT_MAP0_A, 0, 1 << pf);
}

/**
 *      t4_intr_disable - disable interrupts
 *      @adapter: the adapter whose interrupts should be disabled
 *
 *      Disable interrupts.  We only disable the top-level interrupt
 *      concentrators.  The caller must be a PCI function managing global
 *      interrupts.
 */
void t4_intr_disable(struct adapter *adapter)
{
        u32 whoami, pf;

        if (pci_channel_offline(adapter->pdev))
                return;

        whoami = t4_read_reg(adapter, PL_WHOAMI_A);
        pf = CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5 ?
                        SOURCEPF_G(whoami) : T6_SOURCEPF_G(whoami);

        t4_write_reg(adapter, MYPF_REG(PL_PF_INT_ENABLE_A), 0);
        t4_set_reg_field(adapter, PL_INT_MAP0_A, 1 << pf, 0);
}

unsigned int t4_chip_rss_size(struct adapter *adap)
{
        if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
                return RSS_NENTRIES;
        else
                return T6_RSS_NENTRIES;
}

/**
 *      t4_config_rss_range - configure a portion of the RSS mapping table
 *      @adapter: the adapter
 *      @mbox: mbox to use for the FW command
 *      @viid: virtual interface whose RSS subtable is to be written
 *      @start: start entry in the table to write
 *      @n: how many table entries to write
 *      @rspq: values for the response queue lookup table
 *      @nrspq: number of values in @rspq
 *
 *      Programs the selected part of the VI's RSS mapping table with the
 *      provided values.  If @nrspq < @n the supplied values are used repeatedly
 *      until the full table range is populated.
 *
 *      The caller must ensure the values in @rspq are in the range allowed for
 *      @viid.
 */
int t4_config_rss_range(struct adapter *adapter, int mbox, unsigned int viid,
                        int start, int n, const u16 *rspq, unsigned int nrspq)
{
        int ret;
        const u16 *rsp = rspq;
        const u16 *rsp_end = rspq + nrspq;
        struct fw_rss_ind_tbl_cmd cmd;

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_RSS_IND_TBL_CMD) |
                               FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
                               FW_RSS_IND_TBL_CMD_VIID_V(viid));
        cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));

        /* each fw_rss_ind_tbl_cmd takes up to 32 entries */
        while (n > 0) {
                int nq = min(n, 32);
                __be32 *qp = &cmd.iq0_to_iq2;

                cmd.niqid = cpu_to_be16(nq);
                cmd.startidx = cpu_to_be16(start);

                start += nq;
                n -= nq;

                while (nq > 0) {
                        unsigned int v;

                        v = FW_RSS_IND_TBL_CMD_IQ0_V(*rsp);
                        if (++rsp >= rsp_end)
                                rsp = rspq;
                        v |= FW_RSS_IND_TBL_CMD_IQ1_V(*rsp);
                        if (++rsp >= rsp_end)
                                rsp = rspq;
                        v |= FW_RSS_IND_TBL_CMD_IQ2_V(*rsp);
                        if (++rsp >= rsp_end)
                                rsp = rspq;

                        *qp++ = cpu_to_be32(v);
                        nq -= 3;
                }

                ret = t4_wr_mbox(adapter, mbox, &cmd, sizeof(cmd), NULL);
                if (ret)
                        return ret;
        }
        return 0;
}

/**
 *      t4_config_glbl_rss - configure the global RSS mode
 *      @adapter: the adapter
 *      @mbox: mbox to use for the FW command
 *      @mode: global RSS mode
 *      @flags: mode-specific flags
 *
 *      Sets the global RSS mode.
 */
int t4_config_glbl_rss(struct adapter *adapter, int mbox, unsigned int mode,
                       unsigned int flags)
{
        struct fw_rss_glb_config_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_RSS_GLB_CONFIG_CMD) |
                                    FW_CMD_REQUEST_F | FW_CMD_WRITE_F);
        c.retval_len16 = cpu_to_be32(FW_LEN16(c));
        if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_MANUAL) {
                c.u.manual.mode_pkd =
                        cpu_to_be32(FW_RSS_GLB_CONFIG_CMD_MODE_V(mode));
        } else if (mode == FW_RSS_GLB_CONFIG_CMD_MODE_BASICVIRTUAL) {
                c.u.basicvirtual.mode_pkd =
                        cpu_to_be32(FW_RSS_GLB_CONFIG_CMD_MODE_V(mode));
                c.u.basicvirtual.synmapen_to_hashtoeplitz = cpu_to_be32(flags);
        } else
                return -EINVAL;
        return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_config_vi_rss - configure per VI RSS settings
 *      @adapter: the adapter
 *      @mbox: mbox to use for the FW command
 *      @viid: the VI id
 *      @flags: RSS flags
 *      @defq: id of the default RSS queue for the VI.
 *
 *      Configures VI-specific RSS properties.
 */
int t4_config_vi_rss(struct adapter *adapter, int mbox, unsigned int viid,
                     unsigned int flags, unsigned int defq)
{
        struct fw_rss_vi_config_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_RSS_VI_CONFIG_CMD) |
                                   FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
                                   FW_RSS_VI_CONFIG_CMD_VIID_V(viid));
        c.retval_len16 = cpu_to_be32(FW_LEN16(c));
        c.u.basicvirtual.defaultq_to_udpen = cpu_to_be32(flags |
                                        FW_RSS_VI_CONFIG_CMD_DEFAULTQ_V(defq));
        return t4_wr_mbox(adapter, mbox, &c, sizeof(c), NULL);
}

/* Read an RSS table row */
static int rd_rss_row(struct adapter *adap, int row, u32 *val)
{
        t4_write_reg(adap, TP_RSS_LKP_TABLE_A, 0xfff00000 | row);
        return t4_wait_op_done_val(adap, TP_RSS_LKP_TABLE_A, LKPTBLROWVLD_F, 1,
                                   5, 0, val);
}

/**
 *      t4_read_rss - read the contents of the RSS mapping table
 *      @adapter: the adapter
 *      @map: holds the contents of the RSS mapping table
 *
 *      Reads the contents of the RSS hash->queue mapping table.
 */
int t4_read_rss(struct adapter *adapter, u16 *map)
{
        int i, ret, nentries;
        u32 val;

        nentries = t4_chip_rss_size(adapter);
        for (i = 0; i < nentries / 2; ++i) {
                ret = rd_rss_row(adapter, i, &val);
                if (ret)
                        return ret;
                *map++ = LKPTBLQUEUE0_G(val);
                *map++ = LKPTBLQUEUE1_G(val);
        }
        return 0;
}

static unsigned int t4_use_ldst(struct adapter *adap)
{
        return (adap->flags & CXGB4_FW_OK) && !adap->use_bd;
}

/**
 * t4_tp_fw_ldst_rw - Access TP indirect register through LDST
 * @adap: the adapter
 * @cmd: TP fw ldst address space type
 * @vals: where the indirect register values are stored/written
 * @nregs: how many indirect registers to read/write
 * @start_index: index of first indirect register to read/write
 * @rw: Read (1) or Write (0)
 * @sleep_ok: if true we may sleep while awaiting command completion
 *
 * Access TP indirect registers through LDST
 */
static int t4_tp_fw_ldst_rw(struct adapter *adap, int cmd, u32 *vals,
                            unsigned int nregs, unsigned int start_index,
                            unsigned int rw, bool sleep_ok)
{
        int ret = 0;
        unsigned int i;
        struct fw_ldst_cmd c;

        for (i = 0; i < nregs; i++) {
                memset(&c, 0, sizeof(c));
                c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
                                                FW_CMD_REQUEST_F |
                                                (rw ? FW_CMD_READ_F :
                                                      FW_CMD_WRITE_F) |
                                                FW_LDST_CMD_ADDRSPACE_V(cmd));
                c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));

                c.u.addrval.addr = cpu_to_be32(start_index + i);
                c.u.addrval.val  = rw ? 0 : cpu_to_be32(vals[i]);
                ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c,
                                      sleep_ok);
                if (ret)
                        return ret;

                if (rw)
                        vals[i] = be32_to_cpu(c.u.addrval.val);
        }
        return 0;
}

/**
 * t4_tp_indirect_rw - Read/Write TP indirect register through LDST or backdoor
 * @adap: the adapter
 * @reg_addr: Address Register
 * @reg_data: Data register
 * @buff: where the indirect register values are stored/written
 * @nregs: how many indirect registers to read/write
 * @start_index: index of first indirect register to read/write
 * @rw: READ(1) or WRITE(0)
 * @sleep_ok: if true we may sleep while awaiting command completion
 *
 * Read/Write TP indirect registers through LDST if possible.
 * Else, use backdoor access
 **/
static void t4_tp_indirect_rw(struct adapter *adap, u32 reg_addr, u32 reg_data,
                              u32 *buff, u32 nregs, u32 start_index, int rw,
                              bool sleep_ok)
{
        int rc = -EINVAL;
        int cmd;

        switch (reg_addr) {
        case TP_PIO_ADDR_A:
                cmd = FW_LDST_ADDRSPC_TP_PIO;
                break;
        case TP_TM_PIO_ADDR_A:
                cmd = FW_LDST_ADDRSPC_TP_TM_PIO;
                break;
        case TP_MIB_INDEX_A:
                cmd = FW_LDST_ADDRSPC_TP_MIB;
                break;
        default:
                goto indirect_access;
        }

        if (t4_use_ldst(adap))
                rc = t4_tp_fw_ldst_rw(adap, cmd, buff, nregs, start_index, rw,
                                      sleep_ok);

indirect_access:

        if (rc) {
                if (rw)
                        t4_read_indirect(adap, reg_addr, reg_data, buff, nregs,
                                         start_index);
                else
                        t4_write_indirect(adap, reg_addr, reg_data, buff, nregs,
                                          start_index);
        }
}

/**
 * t4_tp_pio_read - Read TP PIO registers
 * @adap: the adapter
 * @buff: where the indirect register values are written
 * @nregs: how many indirect registers to read
 * @start_index: index of first indirect register to read
 * @sleep_ok: if true we may sleep while awaiting command completion
 *
 * Read TP PIO Registers
 **/
void t4_tp_pio_read(struct adapter *adap, u32 *buff, u32 nregs,
                    u32 start_index, bool sleep_ok)
{
        t4_tp_indirect_rw(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A, buff, nregs,
                          start_index, 1, sleep_ok);
}

/**
 * t4_tp_pio_write - Write TP PIO registers
 * @adap: the adapter
 * @buff: where the indirect register values are stored
 * @nregs: how many indirect registers to write
 * @start_index: index of first indirect register to write
 * @sleep_ok: if true we may sleep while awaiting command completion
 *
 * Write TP PIO Registers
 **/
static void t4_tp_pio_write(struct adapter *adap, u32 *buff, u32 nregs,
                            u32 start_index, bool sleep_ok)
{
        t4_tp_indirect_rw(adap, TP_PIO_ADDR_A, TP_PIO_DATA_A, buff, nregs,
                          start_index, 0, sleep_ok);
}

/**
 * t4_tp_tm_pio_read - Read TP TM PIO registers
 * @adap: the adapter
 * @buff: where the indirect register values are written
 * @nregs: how many indirect registers to read
 * @start_index: index of first indirect register to read
 * @sleep_ok: if true we may sleep while awaiting command completion
 *
 * Read TP TM PIO Registers
 **/
void t4_tp_tm_pio_read(struct adapter *adap, u32 *buff, u32 nregs,
                       u32 start_index, bool sleep_ok)
{
        t4_tp_indirect_rw(adap, TP_TM_PIO_ADDR_A, TP_TM_PIO_DATA_A, buff,
                          nregs, start_index, 1, sleep_ok);
}

/**
 * t4_tp_mib_read - Read TP MIB registers
 * @adap: the adapter
 * @buff: where the indirect register values are written
 * @nregs: how many indirect registers to read
 * @start_index: index of first indirect register to read
 * @sleep_ok: if true we may sleep while awaiting command completion
 *
 * Read TP MIB Registers
 **/
void t4_tp_mib_read(struct adapter *adap, u32 *buff, u32 nregs, u32 start_index,
                    bool sleep_ok)
{
        t4_tp_indirect_rw(adap, TP_MIB_INDEX_A, TP_MIB_DATA_A, buff, nregs,
                          start_index, 1, sleep_ok);
}

/**
 *      t4_read_rss_key - read the global RSS key
 *      @adap: the adapter
 *      @key: 10-entry array holding the 320-bit RSS key
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Reads the global 320-bit RSS key.
 */
void t4_read_rss_key(struct adapter *adap, u32 *key, bool sleep_ok)
{
        t4_tp_pio_read(adap, key, 10, TP_RSS_SECRET_KEY0_A, sleep_ok);
}

/**
 *      t4_write_rss_key - program one of the RSS keys
 *      @adap: the adapter
 *      @key: 10-entry array holding the 320-bit RSS key
 *      @idx: which RSS key to write
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Writes one of the RSS keys with the given 320-bit value.  If @idx is
 *      0..15 the corresponding entry in the RSS key table is written,
 *      otherwise the global RSS key is written.
 */
void t4_write_rss_key(struct adapter *adap, const u32 *key, int idx,
                      bool sleep_ok)
{
        u8 rss_key_addr_cnt = 16;
        u32 vrt = t4_read_reg(adap, TP_RSS_CONFIG_VRT_A);

        /* T6 and later: for KeyMode 3 (per-vf and per-vf scramble),
         * allows access to key addresses 16-63 by using KeyWrAddrX
         * as index[5:4](upper 2) into key table
         */
        if ((CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) &&
            (vrt & KEYEXTEND_F) && (KEYMODE_G(vrt) == 3))
                rss_key_addr_cnt = 32;

        t4_tp_pio_write(adap, (void *)key, 10, TP_RSS_SECRET_KEY0_A, sleep_ok);

        if (idx >= 0 && idx < rss_key_addr_cnt) {
                if (rss_key_addr_cnt > 16)
                        t4_write_reg(adap, TP_RSS_CONFIG_VRT_A,
                                     KEYWRADDRX_V(idx >> 4) |
                                     T6_VFWRADDR_V(idx) | KEYWREN_F);
                else
                        t4_write_reg(adap, TP_RSS_CONFIG_VRT_A,
                                     KEYWRADDR_V(idx) | KEYWREN_F);
        }
}

/**
 *      t4_read_rss_pf_config - read PF RSS Configuration Table
 *      @adapter: the adapter
 *      @index: the entry in the PF RSS table to read
 *      @valp: where to store the returned value
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Reads the PF RSS Configuration Table at the specified index and returns
 *      the value found there.
 */
void t4_read_rss_pf_config(struct adapter *adapter, unsigned int index,
                           u32 *valp, bool sleep_ok)
{
        t4_tp_pio_read(adapter, valp, 1, TP_RSS_PF0_CONFIG_A + index, sleep_ok);
}

/**
 *      t4_read_rss_vf_config - read VF RSS Configuration Table
 *      @adapter: the adapter
 *      @index: the entry in the VF RSS table to read
 *      @vfl: where to store the returned VFL
 *      @vfh: where to store the returned VFH
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Reads the VF RSS Configuration Table at the specified index and returns
 *      the (VFL, VFH) values found there.
 */
void t4_read_rss_vf_config(struct adapter *adapter, unsigned int index,
                           u32 *vfl, u32 *vfh, bool sleep_ok)
{
        u32 vrt, mask, data;

        if (CHELSIO_CHIP_VERSION(adapter->params.chip) <= CHELSIO_T5) {
                mask = VFWRADDR_V(VFWRADDR_M);
                data = VFWRADDR_V(index);
        } else {
                 mask =  T6_VFWRADDR_V(T6_VFWRADDR_M);
                 data = T6_VFWRADDR_V(index);
        }

        /* Request that the index'th VF Table values be read into VFL/VFH.
         */
        vrt = t4_read_reg(adapter, TP_RSS_CONFIG_VRT_A);
        vrt &= ~(VFRDRG_F | VFWREN_F | KEYWREN_F | mask);
        vrt |= data | VFRDEN_F;
        t4_write_reg(adapter, TP_RSS_CONFIG_VRT_A, vrt);

        /* Grab the VFL/VFH values ...
         */
        t4_tp_pio_read(adapter, vfl, 1, TP_RSS_VFL_CONFIG_A, sleep_ok);
        t4_tp_pio_read(adapter, vfh, 1, TP_RSS_VFH_CONFIG_A, sleep_ok);
}

/**
 *      t4_read_rss_pf_map - read PF RSS Map
 *      @adapter: the adapter
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Reads the PF RSS Map register and returns its value.
 */
u32 t4_read_rss_pf_map(struct adapter *adapter, bool sleep_ok)
{
        u32 pfmap;

        t4_tp_pio_read(adapter, &pfmap, 1, TP_RSS_PF_MAP_A, sleep_ok);
        return pfmap;
}

/**
 *      t4_read_rss_pf_mask - read PF RSS Mask
 *      @adapter: the adapter
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Reads the PF RSS Mask register and returns its value.
 */
u32 t4_read_rss_pf_mask(struct adapter *adapter, bool sleep_ok)
{
        u32 pfmask;

        t4_tp_pio_read(adapter, &pfmask, 1, TP_RSS_PF_MSK_A, sleep_ok);
        return pfmask;
}

/**
 *      t4_tp_get_tcp_stats - read TP's TCP MIB counters
 *      @adap: the adapter
 *      @v4: holds the TCP/IP counter values
 *      @v6: holds the TCP/IPv6 counter values
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Returns the values of TP's TCP/IP and TCP/IPv6 MIB counters.
 *      Either @v4 or @v6 may be %NULL to skip the corresponding stats.
 */
void t4_tp_get_tcp_stats(struct adapter *adap, struct tp_tcp_stats *v4,
                         struct tp_tcp_stats *v6, bool sleep_ok)
{
        u32 val[TP_MIB_TCP_RXT_SEG_LO_A - TP_MIB_TCP_OUT_RST_A + 1];

#define STAT_IDX(x) ((TP_MIB_TCP_##x##_A) - TP_MIB_TCP_OUT_RST_A)
#define STAT(x)     val[STAT_IDX(x)]
#define STAT64(x)   (((u64)STAT(x##_HI) << 32) | STAT(x##_LO))

        if (v4) {
                t4_tp_mib_read(adap, val, ARRAY_SIZE(val),
                               TP_MIB_TCP_OUT_RST_A, sleep_ok);
                v4->tcp_out_rsts = STAT(OUT_RST);
                v4->tcp_in_segs  = STAT64(IN_SEG);
                v4->tcp_out_segs = STAT64(OUT_SEG);
                v4->tcp_retrans_segs = STAT64(RXT_SEG);
        }
        if (v6) {
                t4_tp_mib_read(adap, val, ARRAY_SIZE(val),
                               TP_MIB_TCP_V6OUT_RST_A, sleep_ok);
                v6->tcp_out_rsts = STAT(OUT_RST);
                v6->tcp_in_segs  = STAT64(IN_SEG);
                v6->tcp_out_segs = STAT64(OUT_SEG);
                v6->tcp_retrans_segs = STAT64(RXT_SEG);
        }
#undef STAT64
#undef STAT
#undef STAT_IDX
}

/**
 *      t4_tp_get_err_stats - read TP's error MIB counters
 *      @adap: the adapter
 *      @st: holds the counter values
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Returns the values of TP's error counters.
 */
void t4_tp_get_err_stats(struct adapter *adap, struct tp_err_stats *st,
                         bool sleep_ok)
{
        int nchan = adap->params.arch.nchan;

        t4_tp_mib_read(adap, st->mac_in_errs, nchan, TP_MIB_MAC_IN_ERR_0_A,
                       sleep_ok);
        t4_tp_mib_read(adap, st->hdr_in_errs, nchan, TP_MIB_HDR_IN_ERR_0_A,
                       sleep_ok);
        t4_tp_mib_read(adap, st->tcp_in_errs, nchan, TP_MIB_TCP_IN_ERR_0_A,
                       sleep_ok);
        t4_tp_mib_read(adap, st->tnl_cong_drops, nchan,
                       TP_MIB_TNL_CNG_DROP_0_A, sleep_ok);
        t4_tp_mib_read(adap, st->ofld_chan_drops, nchan,
                       TP_MIB_OFD_CHN_DROP_0_A, sleep_ok);
        t4_tp_mib_read(adap, st->tnl_tx_drops, nchan, TP_MIB_TNL_DROP_0_A,
                       sleep_ok);
        t4_tp_mib_read(adap, st->ofld_vlan_drops, nchan,
                       TP_MIB_OFD_VLN_DROP_0_A, sleep_ok);
        t4_tp_mib_read(adap, st->tcp6_in_errs, nchan,
                       TP_MIB_TCP_V6IN_ERR_0_A, sleep_ok);
        t4_tp_mib_read(adap, &st->ofld_no_neigh, 2, TP_MIB_OFD_ARP_DROP_A,
                       sleep_ok);
}

/**
 *      t4_tp_get_cpl_stats - read TP's CPL MIB counters
 *      @adap: the adapter
 *      @st: holds the counter values
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Returns the values of TP's CPL counters.
 */
void t4_tp_get_cpl_stats(struct adapter *adap, struct tp_cpl_stats *st,
                         bool sleep_ok)
{
        int nchan = adap->params.arch.nchan;

        t4_tp_mib_read(adap, st->req, nchan, TP_MIB_CPL_IN_REQ_0_A, sleep_ok);

        t4_tp_mib_read(adap, st->rsp, nchan, TP_MIB_CPL_OUT_RSP_0_A, sleep_ok);
}

/**
 *      t4_tp_get_rdma_stats - read TP's RDMA MIB counters
 *      @adap: the adapter
 *      @st: holds the counter values
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Returns the values of TP's RDMA counters.
 */
void t4_tp_get_rdma_stats(struct adapter *adap, struct tp_rdma_stats *st,
                          bool sleep_ok)
{
        t4_tp_mib_read(adap, &st->rqe_dfr_pkt, 2, TP_MIB_RQE_DFR_PKT_A,
                       sleep_ok);
}

/**
 *      t4_get_fcoe_stats - read TP's FCoE MIB counters for a port
 *      @adap: the adapter
 *      @idx: the port index
 *      @st: holds the counter values
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Returns the values of TP's FCoE counters for the selected port.
 */
void t4_get_fcoe_stats(struct adapter *adap, unsigned int idx,
                       struct tp_fcoe_stats *st, bool sleep_ok)
{
        u32 val[2];

        t4_tp_mib_read(adap, &st->frames_ddp, 1, TP_MIB_FCOE_DDP_0_A + idx,
                       sleep_ok);

        t4_tp_mib_read(adap, &st->frames_drop, 1,
                       TP_MIB_FCOE_DROP_0_A + idx, sleep_ok);

        t4_tp_mib_read(adap, val, 2, TP_MIB_FCOE_BYTE_0_HI_A + 2 * idx,
                       sleep_ok);

        st->octets_ddp = ((u64)val[0] << 32) | val[1];
}

/**
 *      t4_get_usm_stats - read TP's non-TCP DDP MIB counters
 *      @adap: the adapter
 *      @st: holds the counter values
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Returns the values of TP's counters for non-TCP directly-placed packets.
 */
void t4_get_usm_stats(struct adapter *adap, struct tp_usm_stats *st,
                      bool sleep_ok)
{
        u32 val[4];

        t4_tp_mib_read(adap, val, 4, TP_MIB_USM_PKTS_A, sleep_ok);
        st->frames = val[0];
        st->drops = val[1];
        st->octets = ((u64)val[2] << 32) | val[3];
}

/**
 *      t4_read_mtu_tbl - returns the values in the HW path MTU table
 *      @adap: the adapter
 *      @mtus: where to store the MTU values
 *      @mtu_log: where to store the MTU base-2 log (may be %NULL)
 *
 *      Reads the HW path MTU table.
 */
void t4_read_mtu_tbl(struct adapter *adap, u16 *mtus, u8 *mtu_log)
{
        u32 v;
        int i;

        for (i = 0; i < NMTUS; ++i) {
                t4_write_reg(adap, TP_MTU_TABLE_A,
                             MTUINDEX_V(0xff) | MTUVALUE_V(i));
                v = t4_read_reg(adap, TP_MTU_TABLE_A);
                mtus[i] = MTUVALUE_G(v);
                if (mtu_log)
                        mtu_log[i] = MTUWIDTH_G(v);
        }
}

/**
 *      t4_read_cong_tbl - reads the congestion control table
 *      @adap: the adapter
 *      @incr: where to store the alpha values
 *
 *      Reads the additive increments programmed into the HW congestion
 *      control table.
 */
void t4_read_cong_tbl(struct adapter *adap, u16 incr[NMTUS][NCCTRL_WIN])
{
        unsigned int mtu, w;

        for (mtu = 0; mtu < NMTUS; ++mtu)
                for (w = 0; w < NCCTRL_WIN; ++w) {
                        t4_write_reg(adap, TP_CCTRL_TABLE_A,
                                     ROWINDEX_V(0xffff) | (mtu << 5) | w);
                        incr[mtu][w] = (u16)t4_read_reg(adap,
                                                TP_CCTRL_TABLE_A) & 0x1fff;
                }
}

/**
 *      t4_tp_wr_bits_indirect - set/clear bits in an indirect TP register
 *      @adap: the adapter
 *      @addr: the indirect TP register address
 *      @mask: specifies the field within the register to modify
 *      @val: new value for the field
 *
 *      Sets a field of an indirect TP register to the given value.
 */
void t4_tp_wr_bits_indirect(struct adapter *adap, unsigned int addr,
                            unsigned int mask, unsigned int val)
{
        t4_write_reg(adap, TP_PIO_ADDR_A, addr);
        val |= t4_read_reg(adap, TP_PIO_DATA_A) & ~mask;
        t4_write_reg(adap, TP_PIO_DATA_A, val);
}

/**
 *      init_cong_ctrl - initialize congestion control parameters
 *      @a: the alpha values for congestion control
 *      @b: the beta values for congestion control
 *
 *      Initialize the congestion control parameters.
 */
static void init_cong_ctrl(unsigned short *a, unsigned short *b)
{
        a[0] = a[1] = a[2] = a[3] = a[4] = a[5] = a[6] = a[7] = a[8] = 1;
        a[9] = 2;
        a[10] = 3;
        a[11] = 4;
        a[12] = 5;
        a[13] = 6;
        a[14] = 7;
        a[15] = 8;
        a[16] = 9;
        a[17] = 10;
        a[18] = 14;
        a[19] = 17;
        a[20] = 21;
        a[21] = 25;
        a[22] = 30;
        a[23] = 35;
        a[24] = 45;
        a[25] = 60;
        a[26] = 80;
        a[27] = 100;
        a[28] = 200;
        a[29] = 300;
        a[30] = 400;
        a[31] = 500;

        b[0] = b[1] = b[2] = b[3] = b[4] = b[5] = b[6] = b[7] = b[8] = 0;
        b[9] = b[10] = 1;
        b[11] = b[12] = 2;
        b[13] = b[14] = b[15] = b[16] = 3;
        b[17] = b[18] = b[19] = b[20] = b[21] = 4;
        b[22] = b[23] = b[24] = b[25] = b[26] = b[27] = 5;
        b[28] = b[29] = 6;
        b[30] = b[31] = 7;
}

/* The minimum additive increment value for the congestion control table */
#define CC_MIN_INCR 2U

/**
 *      t4_load_mtus - write the MTU and congestion control HW tables
 *      @adap: the adapter
 *      @mtus: the values for the MTU table
 *      @alpha: the values for the congestion control alpha parameter
 *      @beta: the values for the congestion control beta parameter
 *
 *      Write the HW MTU table with the supplied MTUs and the high-speed
 *      congestion control table with the supplied alpha, beta, and MTUs.
 *      We write the two tables together because the additive increments
 *      depend on the MTUs.
 */
void t4_load_mtus(struct adapter *adap, const unsigned short *mtus,
                  const unsigned short *alpha, const unsigned short *beta)
{
        static const unsigned int avg_pkts[NCCTRL_WIN] = {
                2, 6, 10, 14, 20, 28, 40, 56, 80, 112, 160, 224, 320, 448, 640,
                896, 1281, 1792, 2560, 3584, 5120, 7168, 10240, 14336, 20480,
                28672, 40960, 57344, 81920, 114688, 163840, 229376
        };

        unsigned int i, w;

        for (i = 0; i < NMTUS; ++i) {
                unsigned int mtu = mtus[i];
                unsigned int log2 = fls(mtu);

                if (!(mtu & ((1 << log2) >> 2)))     /* round */
                        log2--;
                t4_write_reg(adap, TP_MTU_TABLE_A, MTUINDEX_V(i) |
                             MTUWIDTH_V(log2) | MTUVALUE_V(mtu));

                for (w = 0; w < NCCTRL_WIN; ++w) {
                        unsigned int inc;

                        inc = max(((mtu - 40) * alpha[w]) / avg_pkts[w],
                                  CC_MIN_INCR);

                        t4_write_reg(adap, TP_CCTRL_TABLE_A, (i << 21) |
                                     (w << 16) | (beta[w] << 13) | inc);
                }
        }
}

/* Calculates a rate in bytes/s given the number of 256-byte units per 4K core
 * clocks.  The formula is
 *
 * bytes/s = bytes256 * 256 * ClkFreq / 4096
 *
 * which is equivalent to
 *
 * bytes/s = 62.5 * bytes256 * ClkFreq_ms
 */
static u64 chan_rate(struct adapter *adap, unsigned int bytes256)
{
        u64 v = bytes256 * adap->params.vpd.cclk;

        return v * 62 + v / 2;
}

/**
 *      t4_get_chan_txrate - get the current per channel Tx rates
 *      @adap: the adapter
 *      @nic_rate: rates for NIC traffic
 *      @ofld_rate: rates for offloaded traffic
 *
 *      Return the current Tx rates in bytes/s for NIC and offloaded traffic
 *      for each channel.
 */
void t4_get_chan_txrate(struct adapter *adap, u64 *nic_rate, u64 *ofld_rate)
{
        u32 v;

        v = t4_read_reg(adap, TP_TX_TRATE_A);
        nic_rate[0] = chan_rate(adap, TNLRATE0_G(v));
        nic_rate[1] = chan_rate(adap, TNLRATE1_G(v));
        if (adap->params.arch.nchan == NCHAN) {
                nic_rate[2] = chan_rate(adap, TNLRATE2_G(v));
                nic_rate[3] = chan_rate(adap, TNLRATE3_G(v));
        }

        v = t4_read_reg(adap, TP_TX_ORATE_A);
        ofld_rate[0] = chan_rate(adap, OFDRATE0_G(v));
        ofld_rate[1] = chan_rate(adap, OFDRATE1_G(v));
        if (adap->params.arch.nchan == NCHAN) {
                ofld_rate[2] = chan_rate(adap, OFDRATE2_G(v));
                ofld_rate[3] = chan_rate(adap, OFDRATE3_G(v));
        }
}

/**
 *      t4_set_trace_filter - configure one of the tracing filters
 *      @adap: the adapter
 *      @tp: the desired trace filter parameters
 *      @idx: which filter to configure
 *      @enable: whether to enable or disable the filter
 *
 *      Configures one of the tracing filters available in HW.  If @enable is
 *      %0 @tp is not examined and may be %NULL. The user is responsible to
 *      set the single/multiple trace mode by writing to MPS_TRC_CFG_A register
 */
int t4_set_trace_filter(struct adapter *adap, const struct trace_params *tp,
                        int idx, int enable)
{
        int i, ofst = idx * 4;
        u32 data_reg, mask_reg, cfg;

        if (!enable) {
                t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst, 0);
                return 0;
        }

        cfg = t4_read_reg(adap, MPS_TRC_CFG_A);
        if (cfg & TRCMULTIFILTER_F) {
                /* If multiple tracers are enabled, then maximum
                 * capture size is 2.5KB (FIFO size of a single channel)
                 * minus 2 flits for CPL_TRACE_PKT header.
                 */
                if (tp->snap_len > ((10 * 1024 / 4) - (2 * 8)))
                        return -EINVAL;
        } else {
                /* If multiple tracers are disabled, to avoid deadlocks
                 * maximum packet capture size of 9600 bytes is recommended.
                 * Also in this mode, only trace0 can be enabled and running.
                 */
                if (tp->snap_len > 9600 || idx)
                        return -EINVAL;
        }

        if (tp->port > (is_t4(adap->params.chip) ? 11 : 19) || tp->invert > 1 ||
            tp->skip_len > TFLENGTH_M || tp->skip_ofst > TFOFFSET_M ||
            tp->min_len > TFMINPKTSIZE_M)
                return -EINVAL;

        /* stop the tracer we'll be changing */
        t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst, 0);

        idx *= (MPS_TRC_FILTER1_MATCH_A - MPS_TRC_FILTER0_MATCH_A);
        data_reg = MPS_TRC_FILTER0_MATCH_A + idx;
        mask_reg = MPS_TRC_FILTER0_DONT_CARE_A + idx;

        for (i = 0; i < TRACE_LEN / 4; i++, data_reg += 4, mask_reg += 4) {
                t4_write_reg(adap, data_reg, tp->data[i]);
                t4_write_reg(adap, mask_reg, ~tp->mask[i]);
        }
        t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_B_A + ofst,
                     TFCAPTUREMAX_V(tp->snap_len) |
                     TFMINPKTSIZE_V(tp->min_len));
        t4_write_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst,
                     TFOFFSET_V(tp->skip_ofst) | TFLENGTH_V(tp->skip_len) |
                     (is_t4(adap->params.chip) ?
                     TFPORT_V(tp->port) | TFEN_F | TFINVERTMATCH_V(tp->invert) :
                     T5_TFPORT_V(tp->port) | T5_TFEN_F |
                     T5_TFINVERTMATCH_V(tp->invert)));

        return 0;
}

/**
 *      t4_get_trace_filter - query one of the tracing filters
 *      @adap: the adapter
 *      @tp: the current trace filter parameters
 *      @idx: which trace filter to query
 *      @enabled: non-zero if the filter is enabled
 *
 *      Returns the current settings of one of the HW tracing filters.
 */
void t4_get_trace_filter(struct adapter *adap, struct trace_params *tp, int idx,
                         int *enabled)
{
        u32 ctla, ctlb;
        int i, ofst = idx * 4;
        u32 data_reg, mask_reg;

        ctla = t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_A_A + ofst);
        ctlb = t4_read_reg(adap, MPS_TRC_FILTER_MATCH_CTL_B_A + ofst);

        if (is_t4(adap->params.chip)) {
                *enabled = !!(ctla & TFEN_F);
                tp->port =  TFPORT_G(ctla);
                tp->invert = !!(ctla & TFINVERTMATCH_F);
        } else {
                *enabled = !!(ctla & T5_TFEN_F);
                tp->port = T5_TFPORT_G(ctla);
                tp->invert = !!(ctla & T5_TFINVERTMATCH_F);
        }
        tp->snap_len = TFCAPTUREMAX_G(ctlb);
        tp->min_len = TFMINPKTSIZE_G(ctlb);
        tp->skip_ofst = TFOFFSET_G(ctla);
        tp->skip_len = TFLENGTH_G(ctla);

        ofst = (MPS_TRC_FILTER1_MATCH_A - MPS_TRC_FILTER0_MATCH_A) * idx;
        data_reg = MPS_TRC_FILTER0_MATCH_A + ofst;
        mask_reg = MPS_TRC_FILTER0_DONT_CARE_A + ofst;

        for (i = 0; i < TRACE_LEN / 4; i++, data_reg += 4, mask_reg += 4) {
                tp->mask[i] = ~t4_read_reg(adap, mask_reg);
                tp->data[i] = t4_read_reg(adap, data_reg) & tp->mask[i];
        }
}

/**
 *      t4_pmtx_get_stats - returns the HW stats from PMTX
 *      @adap: the adapter
 *      @cnt: where to store the count statistics
 *      @cycles: where to store the cycle statistics
 *
 *      Returns performance statistics from PMTX.
 */
void t4_pmtx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[])
{
        int i;
        u32 data[2];

        for (i = 0; i < adap->params.arch.pm_stats_cnt; i++) {
                t4_write_reg(adap, PM_TX_STAT_CONFIG_A, i + 1);
                cnt[i] = t4_read_reg(adap, PM_TX_STAT_COUNT_A);
                if (is_t4(adap->params.chip)) {
                        cycles[i] = t4_read_reg64(adap, PM_TX_STAT_LSB_A);
                } else {
                        t4_read_indirect(adap, PM_TX_DBG_CTRL_A,
                                         PM_TX_DBG_DATA_A, data, 2,
                                         PM_TX_DBG_STAT_MSB_A);
                        cycles[i] = (((u64)data[0] << 32) | data[1]);
                }
        }
}

/**
 *      t4_pmrx_get_stats - returns the HW stats from PMRX
 *      @adap: the adapter
 *      @cnt: where to store the count statistics
 *      @cycles: where to store the cycle statistics
 *
 *      Returns performance statistics from PMRX.
 */
void t4_pmrx_get_stats(struct adapter *adap, u32 cnt[], u64 cycles[])
{
        int i;
        u32 data[2];

        for (i = 0; i < adap->params.arch.pm_stats_cnt; i++) {
                t4_write_reg(adap, PM_RX_STAT_CONFIG_A, i + 1);
                cnt[i] = t4_read_reg(adap, PM_RX_STAT_COUNT_A);
                if (is_t4(adap->params.chip)) {
                        cycles[i] = t4_read_reg64(adap, PM_RX_STAT_LSB_A);
                } else {
                        t4_read_indirect(adap, PM_RX_DBG_CTRL_A,
                                         PM_RX_DBG_DATA_A, data, 2,
                                         PM_RX_DBG_STAT_MSB_A);
                        cycles[i] = (((u64)data[0] << 32) | data[1]);
                }
        }
}

/**
 *      compute_mps_bg_map - compute the MPS Buffer Group Map for a Port
 *      @adapter: the adapter
 *      @pidx: the port index
 *
 *      Computes and returns a bitmap indicating which MPS buffer groups are
 *      associated with the given Port.  Bit i is set if buffer group i is
 *      used by the Port.
 */
static inline unsigned int compute_mps_bg_map(struct adapter *adapter,
                                              int pidx)
{
        unsigned int chip_version, nports;

        chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);
        nports = 1 << NUMPORTS_G(t4_read_reg(adapter, MPS_CMN_CTL_A));

        switch (chip_version) {
        case CHELSIO_T4:
        case CHELSIO_T5:
                switch (nports) {
                case 1: return 0xf;
                case 2: return 3 << (2 * pidx);
                case 4: return 1 << pidx;
                }
                break;

        case CHELSIO_T6:
                switch (nports) {
                case 2: return 1 << (2 * pidx);
                }
                break;
        }

        dev_err(adapter->pdev_dev, "Need MPS Buffer Group Map for Chip %0x, Nports %d\n",
                chip_version, nports);

        return 0;
}

/**
 *      t4_get_mps_bg_map - return the buffer groups associated with a port
 *      @adapter: the adapter
 *      @pidx: the port index
 *
 *      Returns a bitmap indicating which MPS buffer groups are associated
 *      with the given Port.  Bit i is set if buffer group i is used by the
 *      Port.
 */
unsigned int t4_get_mps_bg_map(struct adapter *adapter, int pidx)
{
        u8 *mps_bg_map;
        unsigned int nports;

        nports = 1 << NUMPORTS_G(t4_read_reg(adapter, MPS_CMN_CTL_A));
        if (pidx >= nports) {
                CH_WARN(adapter, "MPS Port Index %d >= Nports %d\n",
                        pidx, nports);
                return 0;
        }

        /* If we've already retrieved/computed this, just return the result.
         */
        mps_bg_map = adapter->params.mps_bg_map;
        if (mps_bg_map[pidx])
                return mps_bg_map[pidx];

        /* Newer Firmware can tell us what the MPS Buffer Group Map is.
         * If we're talking to such Firmware, let it tell us.  If the new
         * API isn't supported, revert back to old hardcoded way.  The value
         * obtained from Firmware is encoded in below format:
         *
         * val = (( MPSBGMAP[Port 3] << 24 ) |
         *        ( MPSBGMAP[Port 2] << 16 ) |
         *        ( MPSBGMAP[Port 1] <<  8 ) |
         *        ( MPSBGMAP[Port 0] <<  0 ))
         */
        if (adapter->flags & CXGB4_FW_OK) {
                u32 param, val;
                int ret;

                param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
                         FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_MPSBGMAP));
                ret = t4_query_params_ns(adapter, adapter->mbox, adapter->pf,
                                         0, 1, &param, &val);
                if (!ret) {
                        int p;

                        /* Store the BG Map for all of the Ports in order to
                         * avoid more calls to the Firmware in the future.
                         */
                        for (p = 0; p < MAX_NPORTS; p++, val >>= 8)
                                mps_bg_map[p] = val & 0xff;

                        return mps_bg_map[pidx];
                }
        }

        /* Either we're not talking to the Firmware or we're dealing with
         * older Firmware which doesn't support the new API to get the MPS
         * Buffer Group Map.  Fall back to computing it ourselves.
         */
        mps_bg_map[pidx] = compute_mps_bg_map(adapter, pidx);
        return mps_bg_map[pidx];
}

/**
 *      t4_get_tp_e2c_map - return the E2C channel map associated with a port
 *      @adapter: the adapter
 *      @pidx: the port index
 */
static unsigned int t4_get_tp_e2c_map(struct adapter *adapter, int pidx)
{
        unsigned int nports;
        u32 param, val = 0;
        int ret;

        nports = 1 << NUMPORTS_G(t4_read_reg(adapter, MPS_CMN_CTL_A));
        if (pidx >= nports) {
                CH_WARN(adapter, "TP E2C Channel Port Index %d >= Nports %d\n",
                        pidx, nports);
                return 0;
        }

        /* FW version >= 1.16.44.0 can determine E2C channel map using
         * FW_PARAMS_PARAM_DEV_TPCHMAP API.
         */
        param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
                 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_TPCHMAP));
        ret = t4_query_params_ns(adapter, adapter->mbox, adapter->pf,
                                 0, 1, &param, &val);
        if (!ret)
                return (val >> (8 * pidx)) & 0xff;

        return 0;
}

/**
 *      t4_get_tp_ch_map - return TP ingress channels associated with a port
 *      @adap: the adapter
 *      @pidx: the port index
 *
 *      Returns a bitmap indicating which TP Ingress Channels are associated
 *      with a given Port.  Bit i is set if TP Ingress Channel i is used by
 *      the Port.
 */
unsigned int t4_get_tp_ch_map(struct adapter *adap, int pidx)
{
        unsigned int chip_version = CHELSIO_CHIP_VERSION(adap->params.chip);
        unsigned int nports = 1 << NUMPORTS_G(t4_read_reg(adap, MPS_CMN_CTL_A));

        if (pidx >= nports) {
                dev_warn(adap->pdev_dev, "TP Port Index %d >= Nports %d\n",
                         pidx, nports);
                return 0;
        }

        switch (chip_version) {
        case CHELSIO_T4:
        case CHELSIO_T5:
                /* Note that this happens to be the same values as the MPS
                 * Buffer Group Map for these Chips.  But we replicate the code
                 * here because they're really separate concepts.
                 */
                switch (nports) {
                case 1: return 0xf;
                case 2: return 3 << (2 * pidx);
                case 4: return 1 << pidx;
                }
                break;

        case CHELSIO_T6:
                switch (nports) {
                case 1:
                case 2: return 1 << pidx;
                }
                break;
        }

        dev_err(adap->pdev_dev, "Need TP Channel Map for Chip %0x, Nports %d\n",
                chip_version, nports);
        return 0;
}

/**
 *      t4_get_port_type_description - return Port Type string description
 *      @port_type: firmware Port Type enumeration
 */
const char *t4_get_port_type_description(enum fw_port_type port_type)
{
        static const char *const port_type_description[] = {
                "Fiber_XFI",
                "Fiber_XAUI",
                "BT_SGMII",
                "BT_XFI",
                "BT_XAUI",
                "KX4",
                "CX4",
                "KX",
                "KR",
                "SFP",
                "BP_AP",
                "BP4_AP",
                "QSFP_10G",
                "QSA",
                "QSFP",
                "BP40_BA",
                "KR4_100G",
                "CR4_QSFP",
                "CR_QSFP",
                "CR2_QSFP",
                "SFP28",
                "KR_SFP28",
                "KR_XLAUI"
        };

        if (port_type < ARRAY_SIZE(port_type_description))
                return port_type_description[port_type];
        return "UNKNOWN";
}

/**
 *      t4_get_port_stats_offset - collect port stats relative to a previous
 *                                 snapshot
 *      @adap: The adapter
 *      @idx: The port
 *      @stats: Current stats to fill
 *      @offset: Previous stats snapshot
 */
void t4_get_port_stats_offset(struct adapter *adap, int idx,
                              struct port_stats *stats,
                              struct port_stats *offset)
{
        u64 *s, *o;
        int i;

        t4_get_port_stats(adap, idx, stats);
        for (i = 0, s = (u64 *)stats, o = (u64 *)offset;
                        i < (sizeof(struct port_stats) / sizeof(u64));
                        i++, s++, o++)
                *s -= *o;
}

/**
 *      t4_get_port_stats - collect port statistics
 *      @adap: the adapter
 *      @idx: the port index
 *      @p: the stats structure to fill
 *
 *      Collect statistics related to the given port from HW.
 */
void t4_get_port_stats(struct adapter *adap, int idx, struct port_stats *p)
{
        u32 bgmap = t4_get_mps_bg_map(adap, idx);
        u32 stat_ctl = t4_read_reg(adap, MPS_STAT_CTL_A);

#define GET_STAT(name) \
        t4_read_reg64(adap, \
        (is_t4(adap->params.chip) ? PORT_REG(idx, MPS_PORT_STAT_##name##_L) : \
        T5_PORT_REG(idx, MPS_PORT_STAT_##name##_L)))
#define GET_STAT_COM(name) t4_read_reg64(adap, MPS_STAT_##name##_L)

        p->tx_octets           = GET_STAT(TX_PORT_BYTES);
        p->tx_frames           = GET_STAT(TX_PORT_FRAMES);
        p->tx_bcast_frames     = GET_STAT(TX_PORT_BCAST);
        p->tx_mcast_frames     = GET_STAT(TX_PORT_MCAST);
        p->tx_ucast_frames     = GET_STAT(TX_PORT_UCAST);
        p->tx_error_frames     = GET_STAT(TX_PORT_ERROR);
        p->tx_frames_64        = GET_STAT(TX_PORT_64B);
        p->tx_frames_65_127    = GET_STAT(TX_PORT_65B_127B);
        p->tx_frames_128_255   = GET_STAT(TX_PORT_128B_255B);
        p->tx_frames_256_511   = GET_STAT(TX_PORT_256B_511B);
        p->tx_frames_512_1023  = GET_STAT(TX_PORT_512B_1023B);
        p->tx_frames_1024_1518 = GET_STAT(TX_PORT_1024B_1518B);
        p->tx_frames_1519_max  = GET_STAT(TX_PORT_1519B_MAX);
        p->tx_drop             = GET_STAT(TX_PORT_DROP);
        p->tx_pause            = GET_STAT(TX_PORT_PAUSE);
        p->tx_ppp0             = GET_STAT(TX_PORT_PPP0);
        p->tx_ppp1             = GET_STAT(TX_PORT_PPP1);
        p->tx_ppp2             = GET_STAT(TX_PORT_PPP2);
        p->tx_ppp3             = GET_STAT(TX_PORT_PPP3);
        p->tx_ppp4             = GET_STAT(TX_PORT_PPP4);
        p->tx_ppp5             = GET_STAT(TX_PORT_PPP5);
        p->tx_ppp6             = GET_STAT(TX_PORT_PPP6);
        p->tx_ppp7             = GET_STAT(TX_PORT_PPP7);

        if (CHELSIO_CHIP_VERSION(adap->params.chip) >= CHELSIO_T5) {
                if (stat_ctl & COUNTPAUSESTATTX_F)
                        p->tx_frames_64 -= p->tx_pause;
                if (stat_ctl & COUNTPAUSEMCTX_F)
                        p->tx_mcast_frames -= p->tx_pause;
        }
        p->rx_octets           = GET_STAT(RX_PORT_BYTES);
        p->rx_frames           = GET_STAT(RX_PORT_FRAMES);
        p->rx_bcast_frames     = GET_STAT(RX_PORT_BCAST);
        p->rx_mcast_frames     = GET_STAT(RX_PORT_MCAST);
        p->rx_ucast_frames     = GET_STAT(RX_PORT_UCAST);
        p->rx_too_long         = GET_STAT(RX_PORT_MTU_ERROR);
        p->rx_jabber           = GET_STAT(RX_PORT_MTU_CRC_ERROR);
        p->rx_fcs_err          = GET_STAT(RX_PORT_CRC_ERROR);
        p->rx_len_err          = GET_STAT(RX_PORT_LEN_ERROR);
        p->rx_symbol_err       = GET_STAT(RX_PORT_SYM_ERROR);
        p->rx_runt             = GET_STAT(RX_PORT_LESS_64B);
        p->rx_frames_64        = GET_STAT(RX_PORT_64B);
        p->rx_frames_65_127    = GET_STAT(RX_PORT_65B_127B);
        p->rx_frames_128_255   = GET_STAT(RX_PORT_128B_255B);
        p->rx_frames_256_511   = GET_STAT(RX_PORT_256B_511B);
        p->rx_frames_512_1023  = GET_STAT(RX_PORT_512B_1023B);
        p->rx_frames_1024_1518 = GET_STAT(RX_PORT_1024B_1518B);
        p->rx_frames_1519_max  = GET_STAT(RX_PORT_1519B_MAX);
        p->rx_pause            = GET_STAT(RX_PORT_PAUSE);
        p->rx_ppp0             = GET_STAT(RX_PORT_PPP0);
        p->rx_ppp1             = GET_STAT(RX_PORT_PPP1);
        p->rx_ppp2             = GET_STAT(RX_PORT_PPP2);
        p->rx_ppp3             = GET_STAT(RX_PORT_PPP3);
        p->rx_ppp4             = GET_STAT(RX_PORT_PPP4);
        p->rx_ppp5             = GET_STAT(RX_PORT_PPP5);
        p->rx_ppp6             = GET_STAT(RX_PORT_PPP6);
        p->rx_ppp7             = GET_STAT(RX_PORT_PPP7);

        if (CHELSIO_CHIP_VERSION(adap->params.chip) >= CHELSIO_T5) {
                if (stat_ctl & COUNTPAUSESTATRX_F)
                        p->rx_frames_64 -= p->rx_pause;
                if (stat_ctl & COUNTPAUSEMCRX_F)
                        p->rx_mcast_frames -= p->rx_pause;
        }

        p->rx_ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_DROP_FRAME) : 0;
        p->rx_ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_DROP_FRAME) : 0;
        p->rx_ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_DROP_FRAME) : 0;
        p->rx_ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_DROP_FRAME) : 0;
        p->rx_trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_MAC_TRUNC_FRAME) : 0;
        p->rx_trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_MAC_TRUNC_FRAME) : 0;
        p->rx_trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_MAC_TRUNC_FRAME) : 0;
        p->rx_trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_MAC_TRUNC_FRAME) : 0;

#undef GET_STAT
#undef GET_STAT_COM
}

/**
 *      t4_get_lb_stats - collect loopback port statistics
 *      @adap: the adapter
 *      @idx: the loopback port index
 *      @p: the stats structure to fill
 *
 *      Return HW statistics for the given loopback port.
 */
void t4_get_lb_stats(struct adapter *adap, int idx, struct lb_port_stats *p)
{
        u32 bgmap = t4_get_mps_bg_map(adap, idx);

#define GET_STAT(name) \
        t4_read_reg64(adap, \
        (is_t4(adap->params.chip) ? \
        PORT_REG(idx, MPS_PORT_STAT_LB_PORT_##name##_L) : \
        T5_PORT_REG(idx, MPS_PORT_STAT_LB_PORT_##name##_L)))
#define GET_STAT_COM(name) t4_read_reg64(adap, MPS_STAT_##name##_L)

        p->octets           = GET_STAT(BYTES);
        p->frames           = GET_STAT(FRAMES);
        p->bcast_frames     = GET_STAT(BCAST);
        p->mcast_frames     = GET_STAT(MCAST);
        p->ucast_frames     = GET_STAT(UCAST);
        p->error_frames     = GET_STAT(ERROR);

        p->frames_64        = GET_STAT(64B);
        p->frames_65_127    = GET_STAT(65B_127B);
        p->frames_128_255   = GET_STAT(128B_255B);
        p->frames_256_511   = GET_STAT(256B_511B);
        p->frames_512_1023  = GET_STAT(512B_1023B);
        p->frames_1024_1518 = GET_STAT(1024B_1518B);
        p->frames_1519_max  = GET_STAT(1519B_MAX);
        p->drop             = GET_STAT(DROP_FRAMES);

        p->ovflow0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_LB_DROP_FRAME) : 0;
        p->ovflow1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_LB_DROP_FRAME) : 0;
        p->ovflow2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_LB_DROP_FRAME) : 0;
        p->ovflow3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_LB_DROP_FRAME) : 0;
        p->trunc0 = (bgmap & 1) ? GET_STAT_COM(RX_BG_0_LB_TRUNC_FRAME) : 0;
        p->trunc1 = (bgmap & 2) ? GET_STAT_COM(RX_BG_1_LB_TRUNC_FRAME) : 0;
        p->trunc2 = (bgmap & 4) ? GET_STAT_COM(RX_BG_2_LB_TRUNC_FRAME) : 0;
        p->trunc3 = (bgmap & 8) ? GET_STAT_COM(RX_BG_3_LB_TRUNC_FRAME) : 0;

#undef GET_STAT
#undef GET_STAT_COM
}

/*     t4_mk_filtdelwr - create a delete filter WR
 *     @ftid: the filter ID
 *     @wr: the filter work request to populate
 *     @qid: ingress queue to receive the delete notification
 *
 *     Creates a filter work request to delete the supplied filter.  If @qid is
 *     negative the delete notification is suppressed.
 */
void t4_mk_filtdelwr(unsigned int ftid, struct fw_filter_wr *wr, int qid)
{
        memset(wr, 0, sizeof(*wr));
        wr->op_pkd = cpu_to_be32(FW_WR_OP_V(FW_FILTER_WR));
        wr->len16_pkd = cpu_to_be32(FW_WR_LEN16_V(sizeof(*wr) / 16));
        wr->tid_to_iq = cpu_to_be32(FW_FILTER_WR_TID_V(ftid) |
                                    FW_FILTER_WR_NOREPLY_V(qid < 0));
        wr->del_filter_to_l2tix = cpu_to_be32(FW_FILTER_WR_DEL_FILTER_F);
        if (qid >= 0)
                wr->rx_chan_rx_rpl_iq =
                        cpu_to_be16(FW_FILTER_WR_RX_RPL_IQ_V(qid));
}

#define INIT_CMD(var, cmd, rd_wr) do { \
        (var).op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_##cmd##_CMD) | \
                                        FW_CMD_REQUEST_F | \
                                        FW_CMD_##rd_wr##_F); \
        (var).retval_len16 = cpu_to_be32(FW_LEN16(var)); \
} while (0)

int t4_fwaddrspace_write(struct adapter *adap, unsigned int mbox,
                          u32 addr, u32 val)
{
        u32 ldst_addrspace;
        struct fw_ldst_cmd c;

        memset(&c, 0, sizeof(c));
        ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_FIRMWARE);
        c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
                                        FW_CMD_REQUEST_F |
                                        FW_CMD_WRITE_F |
                                        ldst_addrspace);
        c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
        c.u.addrval.addr = cpu_to_be32(addr);
        c.u.addrval.val = cpu_to_be32(val);

        return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_mdio_rd - read a PHY register through MDIO
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @phy_addr: the PHY address
 *      @mmd: the PHY MMD to access (0 for clause 22 PHYs)
 *      @reg: the register to read
 *      @valp: where to store the value
 *
 *      Issues a FW command through the given mailbox to read a PHY register.
 */
int t4_mdio_rd(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
               unsigned int mmd, unsigned int reg, u16 *valp)
{
        int ret;
        u32 ldst_addrspace;
        struct fw_ldst_cmd c;

        memset(&c, 0, sizeof(c));
        ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_MDIO);
        c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
                                        FW_CMD_REQUEST_F | FW_CMD_READ_F |
                                        ldst_addrspace);
        c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
        c.u.mdio.paddr_mmd = cpu_to_be16(FW_LDST_CMD_PADDR_V(phy_addr) |
                                         FW_LDST_CMD_MMD_V(mmd));
        c.u.mdio.raddr = cpu_to_be16(reg);

        ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
        if (ret == 0)
                *valp = be16_to_cpu(c.u.mdio.rval);
        return ret;
}

/**
 *      t4_mdio_wr - write a PHY register through MDIO
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @phy_addr: the PHY address
 *      @mmd: the PHY MMD to access (0 for clause 22 PHYs)
 *      @reg: the register to write
 *      @val: value to write
 *
 *      Issues a FW command through the given mailbox to write a PHY register.
 */
int t4_mdio_wr(struct adapter *adap, unsigned int mbox, unsigned int phy_addr,
               unsigned int mmd, unsigned int reg, u16 val)
{
        u32 ldst_addrspace;
        struct fw_ldst_cmd c;

        memset(&c, 0, sizeof(c));
        ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_MDIO);
        c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
                                        FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
                                        ldst_addrspace);
        c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
        c.u.mdio.paddr_mmd = cpu_to_be16(FW_LDST_CMD_PADDR_V(phy_addr) |
                                         FW_LDST_CMD_MMD_V(mmd));
        c.u.mdio.raddr = cpu_to_be16(reg);
        c.u.mdio.rval = cpu_to_be16(val);

        return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_sge_decode_idma_state - decode the idma state
 *      @adapter: the adapter
 *      @state: the state idma is stuck in
 */
void t4_sge_decode_idma_state(struct adapter *adapter, int state)
{
        static const char * const t4_decode[] = {
                "IDMA_IDLE",
                "IDMA_PUSH_MORE_CPL_FIFO",
                "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
                "Not used",
                "IDMA_PHYSADDR_SEND_PCIEHDR",
                "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
                "IDMA_PHYSADDR_SEND_PAYLOAD",
                "IDMA_SEND_FIFO_TO_IMSG",
                "IDMA_FL_REQ_DATA_FL_PREP",
                "IDMA_FL_REQ_DATA_FL",
                "IDMA_FL_DROP",
                "IDMA_FL_H_REQ_HEADER_FL",
                "IDMA_FL_H_SEND_PCIEHDR",
                "IDMA_FL_H_PUSH_CPL_FIFO",
                "IDMA_FL_H_SEND_CPL",
                "IDMA_FL_H_SEND_IP_HDR_FIRST",
                "IDMA_FL_H_SEND_IP_HDR",
                "IDMA_FL_H_REQ_NEXT_HEADER_FL",
                "IDMA_FL_H_SEND_NEXT_PCIEHDR",
                "IDMA_FL_H_SEND_IP_HDR_PADDING",
                "IDMA_FL_D_SEND_PCIEHDR",
                "IDMA_FL_D_SEND_CPL_AND_IP_HDR",
                "IDMA_FL_D_REQ_NEXT_DATA_FL",
                "IDMA_FL_SEND_PCIEHDR",
                "IDMA_FL_PUSH_CPL_FIFO",
                "IDMA_FL_SEND_CPL",
                "IDMA_FL_SEND_PAYLOAD_FIRST",
                "IDMA_FL_SEND_PAYLOAD",
                "IDMA_FL_REQ_NEXT_DATA_FL",
                "IDMA_FL_SEND_NEXT_PCIEHDR",
                "IDMA_FL_SEND_PADDING",
                "IDMA_FL_SEND_COMPLETION_TO_IMSG",
                "IDMA_FL_SEND_FIFO_TO_IMSG",
                "IDMA_FL_REQ_DATAFL_DONE",
                "IDMA_FL_REQ_HEADERFL_DONE",
        };
        static const char * const t5_decode[] = {
                "IDMA_IDLE",
                "IDMA_ALMOST_IDLE",
                "IDMA_PUSH_MORE_CPL_FIFO",
                "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
                "IDMA_SGEFLRFLUSH_SEND_PCIEHDR",
                "IDMA_PHYSADDR_SEND_PCIEHDR",
                "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
                "IDMA_PHYSADDR_SEND_PAYLOAD",
                "IDMA_SEND_FIFO_TO_IMSG",
                "IDMA_FL_REQ_DATA_FL",
                "IDMA_FL_DROP",
                "IDMA_FL_DROP_SEND_INC",
                "IDMA_FL_H_REQ_HEADER_FL",
                "IDMA_FL_H_SEND_PCIEHDR",
                "IDMA_FL_H_PUSH_CPL_FIFO",
                "IDMA_FL_H_SEND_CPL",
                "IDMA_FL_H_SEND_IP_HDR_FIRST",
                "IDMA_FL_H_SEND_IP_HDR",
                "IDMA_FL_H_REQ_NEXT_HEADER_FL",
                "IDMA_FL_H_SEND_NEXT_PCIEHDR",
                "IDMA_FL_H_SEND_IP_HDR_PADDING",
                "IDMA_FL_D_SEND_PCIEHDR",
                "IDMA_FL_D_SEND_CPL_AND_IP_HDR",
                "IDMA_FL_D_REQ_NEXT_DATA_FL",
                "IDMA_FL_SEND_PCIEHDR",
                "IDMA_FL_PUSH_CPL_FIFO",
                "IDMA_FL_SEND_CPL",
                "IDMA_FL_SEND_PAYLOAD_FIRST",
                "IDMA_FL_SEND_PAYLOAD",
                "IDMA_FL_REQ_NEXT_DATA_FL",
                "IDMA_FL_SEND_NEXT_PCIEHDR",
                "IDMA_FL_SEND_PADDING",
                "IDMA_FL_SEND_COMPLETION_TO_IMSG",
        };
        static const char * const t6_decode[] = {
                "IDMA_IDLE",
                "IDMA_PUSH_MORE_CPL_FIFO",
                "IDMA_PUSH_CPL_MSG_HEADER_TO_FIFO",
                "IDMA_SGEFLRFLUSH_SEND_PCIEHDR",
                "IDMA_PHYSADDR_SEND_PCIEHDR",
                "IDMA_PHYSADDR_SEND_PAYLOAD_FIRST",
                "IDMA_PHYSADDR_SEND_PAYLOAD",
                "IDMA_FL_REQ_DATA_FL",
                "IDMA_FL_DROP",
                "IDMA_FL_DROP_SEND_INC",
                "IDMA_FL_H_REQ_HEADER_FL",
                "IDMA_FL_H_SEND_PCIEHDR",
                "IDMA_FL_H_PUSH_CPL_FIFO",
                "IDMA_FL_H_SEND_CPL",
                "IDMA_FL_H_SEND_IP_HDR_FIRST",
                "IDMA_FL_H_SEND_IP_HDR",
                "IDMA_FL_H_REQ_NEXT_HEADER_FL",
                "IDMA_FL_H_SEND_NEXT_PCIEHDR",
                "IDMA_FL_H_SEND_IP_HDR_PADDING",
                "IDMA_FL_D_SEND_PCIEHDR",
                "IDMA_FL_D_SEND_CPL_AND_IP_HDR",
                "IDMA_FL_D_REQ_NEXT_DATA_FL",
                "IDMA_FL_SEND_PCIEHDR",
                "IDMA_FL_PUSH_CPL_FIFO",
                "IDMA_FL_SEND_CPL",
                "IDMA_FL_SEND_PAYLOAD_FIRST",
                "IDMA_FL_SEND_PAYLOAD",
                "IDMA_FL_REQ_NEXT_DATA_FL",
                "IDMA_FL_SEND_NEXT_PCIEHDR",
                "IDMA_FL_SEND_PADDING",
                "IDMA_FL_SEND_COMPLETION_TO_IMSG",
        };
        static const u32 sge_regs[] = {
                SGE_DEBUG_DATA_LOW_INDEX_2_A,
                SGE_DEBUG_DATA_LOW_INDEX_3_A,
                SGE_DEBUG_DATA_HIGH_INDEX_10_A,
        };
        const char **sge_idma_decode;
        int sge_idma_decode_nstates;
        int i;
        unsigned int chip_version = CHELSIO_CHIP_VERSION(adapter->params.chip);

        /* Select the right set of decode strings to dump depending on the
         * adapter chip type.
         */
        switch (chip_version) {
        case CHELSIO_T4:
                sge_idma_decode = (const char **)t4_decode;
                sge_idma_decode_nstates = ARRAY_SIZE(t4_decode);
                break;

        case CHELSIO_T5:
                sge_idma_decode = (const char **)t5_decode;
                sge_idma_decode_nstates = ARRAY_SIZE(t5_decode);
                break;

        case CHELSIO_T6:
                sge_idma_decode = (const char **)t6_decode;
                sge_idma_decode_nstates = ARRAY_SIZE(t6_decode);
                break;

        default:
                dev_err(adapter->pdev_dev,
                        "Unsupported chip version %d\n", chip_version);
                return;
        }

        if (state < sge_idma_decode_nstates)
                CH_WARN(adapter, "idma state %s\n", sge_idma_decode[state]);
        else
                CH_WARN(adapter, "idma state %d unknown\n", state);

        for (i = 0; i < ARRAY_SIZE(sge_regs); i++)
                CH_WARN(adapter, "SGE register %#x value %#x\n",
                        sge_regs[i], t4_read_reg(adapter, sge_regs[i]));
}

/**
 *      t4_sge_ctxt_flush - flush the SGE context cache
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @ctxt_type: Egress or Ingress
 *
 *      Issues a FW command through the given mailbox to flush the
 *      SGE context cache.
 */
int t4_sge_ctxt_flush(struct adapter *adap, unsigned int mbox, int ctxt_type)
{
        int ret;
        u32 ldst_addrspace;
        struct fw_ldst_cmd c;

        memset(&c, 0, sizeof(c));
        ldst_addrspace = FW_LDST_CMD_ADDRSPACE_V(ctxt_type == CTXT_EGRESS ?
                                                 FW_LDST_ADDRSPC_SGE_EGRC :
                                                 FW_LDST_ADDRSPC_SGE_INGC);
        c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
                                        FW_CMD_REQUEST_F | FW_CMD_READ_F |
                                        ldst_addrspace);
        c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
        c.u.idctxt.msg_ctxtflush = cpu_to_be32(FW_LDST_CMD_CTXTFLUSH_F);

        ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
        return ret;
}

/**
 *      t4_read_sge_dbqtimers - read SGE Doorbell Queue Timer values
 *      @adap: the adapter
 *      @ndbqtimers: size of the provided SGE Doorbell Queue Timer table
 *      @dbqtimers: SGE Doorbell Queue Timer table
 *
 *      Reads the SGE Doorbell Queue Timer values into the provided table.
 *      Returns 0 on success (Firmware and Hardware support this feature),
 *      an error on failure.
 */
int t4_read_sge_dbqtimers(struct adapter *adap, unsigned int ndbqtimers,
                          u16 *dbqtimers)
{
        int ret, dbqtimerix;

        ret = 0;
        dbqtimerix = 0;
        while (dbqtimerix < ndbqtimers) {
                int nparams, param;
                u32 params[7], vals[7];

                nparams = ndbqtimers - dbqtimerix;
                if (nparams > ARRAY_SIZE(params))
                        nparams = ARRAY_SIZE(params);

                for (param = 0; param < nparams; param++)
                        params[param] =
                          (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
                           FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_DBQ_TIMER) |
                           FW_PARAMS_PARAM_Y_V(dbqtimerix + param));
                ret = t4_query_params(adap, adap->mbox, adap->pf, 0,
                                      nparams, params, vals);
                if (ret)
                        break;

                for (param = 0; param < nparams; param++)
                        dbqtimers[dbqtimerix++] = vals[param];
        }
        return ret;
}

/**
 *      t4_fw_hello - establish communication with FW
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @evt_mbox: mailbox to receive async FW events
 *      @master: specifies the caller's willingness to be the device master
 *      @state: returns the current device state (if non-NULL)
 *
 *      Issues a command to establish communication with FW.  Returns either
 *      an error (negative integer) or the mailbox of the Master PF.
 */
int t4_fw_hello(struct adapter *adap, unsigned int mbox, unsigned int evt_mbox,
                enum dev_master master, enum dev_state *state)
{
        int ret;
        struct fw_hello_cmd c;
        u32 v;
        unsigned int master_mbox;
        int retries = FW_CMD_HELLO_RETRIES;

retry:
        memset(&c, 0, sizeof(c));
        INIT_CMD(c, HELLO, WRITE);
        c.err_to_clearinit = cpu_to_be32(
                FW_HELLO_CMD_MASTERDIS_V(master == MASTER_CANT) |
                FW_HELLO_CMD_MASTERFORCE_V(master == MASTER_MUST) |
                FW_HELLO_CMD_MBMASTER_V(master == MASTER_MUST ?
                                        mbox : FW_HELLO_CMD_MBMASTER_M) |
                FW_HELLO_CMD_MBASYNCNOT_V(evt_mbox) |
                FW_HELLO_CMD_STAGE_V(fw_hello_cmd_stage_os) |
                FW_HELLO_CMD_CLEARINIT_F);

        /*
         * Issue the HELLO command to the firmware.  If it's not successful
         * but indicates that we got a "busy" or "timeout" condition, retry
         * the HELLO until we exhaust our retry limit.  If we do exceed our
         * retry limit, check to see if the firmware left us any error
         * information and report that if so.
         */
        ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
        if (ret < 0) {
                if ((ret == -EBUSY || ret == -ETIMEDOUT) && retries-- > 0)
                        goto retry;
                if (t4_read_reg(adap, PCIE_FW_A) & PCIE_FW_ERR_F)
                        t4_report_fw_error(adap);
                return ret;
        }

        v = be32_to_cpu(c.err_to_clearinit);
        master_mbox = FW_HELLO_CMD_MBMASTER_G(v);
        if (state) {
                if (v & FW_HELLO_CMD_ERR_F)
                        *state = DEV_STATE_ERR;
                else if (v & FW_HELLO_CMD_INIT_F)
                        *state = DEV_STATE_INIT;
                else
                        *state = DEV_STATE_UNINIT;
        }

        /*
         * If we're not the Master PF then we need to wait around for the
         * Master PF Driver to finish setting up the adapter.
         *
         * Note that we also do this wait if we're a non-Master-capable PF and
         * there is no current Master PF; a Master PF may show up momentarily
         * and we wouldn't want to fail pointlessly.  (This can happen when an
         * OS loads lots of different drivers rapidly at the same time).  In
         * this case, the Master PF returned by the firmware will be
         * PCIE_FW_MASTER_M so the test below will work ...
         */
        if ((v & (FW_HELLO_CMD_ERR_F|FW_HELLO_CMD_INIT_F)) == 0 &&
            master_mbox != mbox) {
                int waiting = FW_CMD_HELLO_TIMEOUT;

                /*
                 * Wait for the firmware to either indicate an error or
                 * initialized state.  If we see either of these we bail out
                 * and report the issue to the caller.  If we exhaust the
                 * "hello timeout" and we haven't exhausted our retries, try
                 * again.  Otherwise bail with a timeout error.
                 */
                for (;;) {
                        u32 pcie_fw;

                        msleep(50);
                        waiting -= 50;

                        /*
                         * If neither Error nor Initialized are indicated
                         * by the firmware keep waiting till we exhaust our
                         * timeout ... and then retry if we haven't exhausted
                         * our retries ...
                         */
                        pcie_fw = t4_read_reg(adap, PCIE_FW_A);
                        if (!(pcie_fw & (PCIE_FW_ERR_F|PCIE_FW_INIT_F))) {
                                if (waiting <= 0) {
                                        if (retries-- > 0)
                                                goto retry;

                                        return -ETIMEDOUT;
                                }
                                continue;
                        }

                        /*
                         * We either have an Error or Initialized condition
                         * report errors preferentially.
                         */
                        if (state) {
                                if (pcie_fw & PCIE_FW_ERR_F)
                                        *state = DEV_STATE_ERR;
                                else if (pcie_fw & PCIE_FW_INIT_F)
                                        *state = DEV_STATE_INIT;
                        }

                        /*
                         * If we arrived before a Master PF was selected and
                         * there's not a valid Master PF, grab its identity
                         * for our caller.
                         */
                        if (master_mbox == PCIE_FW_MASTER_M &&
                            (pcie_fw & PCIE_FW_MASTER_VLD_F))
                                master_mbox = PCIE_FW_MASTER_G(pcie_fw);
                        break;
                }
        }

        return master_mbox;
}

/**
 *      t4_fw_bye - end communication with FW
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *
 *      Issues a command to terminate communication with FW.
 */
int t4_fw_bye(struct adapter *adap, unsigned int mbox)
{
        struct fw_bye_cmd c;

        memset(&c, 0, sizeof(c));
        INIT_CMD(c, BYE, WRITE);
        return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_early_init - ask FW to initialize the device
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *
 *      Issues a command to FW to partially initialize the device.  This
 *      performs initialization that generally doesn't depend on user input.
 */
int t4_early_init(struct adapter *adap, unsigned int mbox)
{
        struct fw_initialize_cmd c;

        memset(&c, 0, sizeof(c));
        INIT_CMD(c, INITIALIZE, WRITE);
        return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_fw_reset - issue a reset to FW
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @reset: specifies the type of reset to perform
 *
 *      Issues a reset command of the specified type to FW.
 */
int t4_fw_reset(struct adapter *adap, unsigned int mbox, int reset)
{
        struct fw_reset_cmd c;

        memset(&c, 0, sizeof(c));
        INIT_CMD(c, RESET, WRITE);
        c.val = cpu_to_be32(reset);
        return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_fw_halt - issue a reset/halt to FW and put uP into RESET
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW RESET command (if desired)
 *      @force: force uP into RESET even if FW RESET command fails
 *
 *      Issues a RESET command to firmware (if desired) with a HALT indication
 *      and then puts the microprocessor into RESET state.  The RESET command
 *      will only be issued if a legitimate mailbox is provided (mbox <=
 *      PCIE_FW_MASTER_M).
 *
 *      This is generally used in order for the host to safely manipulate the
 *      adapter without fear of conflicting with whatever the firmware might
 *      be doing.  The only way out of this state is to RESTART the firmware
 *      ...
 */
static int t4_fw_halt(struct adapter *adap, unsigned int mbox, int force)
{
        int ret = 0;

        /*
         * If a legitimate mailbox is provided, issue a RESET command
         * with a HALT indication.
         */
        if (mbox <= PCIE_FW_MASTER_M) {
                struct fw_reset_cmd c;

                memset(&c, 0, sizeof(c));
                INIT_CMD(c, RESET, WRITE);
                c.val = cpu_to_be32(PIORST_F | PIORSTMODE_F);
                c.halt_pkd = cpu_to_be32(FW_RESET_CMD_HALT_F);
                ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
        }

        /*
         * Normally we won't complete the operation if the firmware RESET
         * command fails but if our caller insists we'll go ahead and put the
         * uP into RESET.  This can be useful if the firmware is hung or even
         * missing ...  We'll have to take the risk of putting the uP into
         * RESET without the cooperation of firmware in that case.
         *
         * We also force the firmware's HALT flag to be on in case we bypassed
         * the firmware RESET command above or we're dealing with old firmware
         * which doesn't have the HALT capability.  This will serve as a flag
         * for the incoming firmware to know that it's coming out of a HALT
         * rather than a RESET ... if it's new enough to understand that ...
         */
        if (ret == 0 || force) {
                t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, UPCRST_F);
                t4_set_reg_field(adap, PCIE_FW_A, PCIE_FW_HALT_F,
                                 PCIE_FW_HALT_F);
        }

        /*
         * And we always return the result of the firmware RESET command
         * even when we force the uP into RESET ...
         */
        return ret;
}

/**
 *      t4_fw_restart - restart the firmware by taking the uP out of RESET
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @reset: if we want to do a RESET to restart things
 *
 *      Restart firmware previously halted by t4_fw_halt().  On successful
 *      return the previous PF Master remains as the new PF Master and there
 *      is no need to issue a new HELLO command, etc.
 *
 *      We do this in two ways:
 *
 *       1. If we're dealing with newer firmware we'll simply want to take
 *          the chip's microprocessor out of RESET.  This will cause the
 *          firmware to start up from its start vector.  And then we'll loop
 *          until the firmware indicates it's started again (PCIE_FW.HALT
 *          reset to 0) or we timeout.
 *
 *       2. If we're dealing with older firmware then we'll need to RESET
 *          the chip since older firmware won't recognize the PCIE_FW.HALT
 *          flag and automatically RESET itself on startup.
 */
static int t4_fw_restart(struct adapter *adap, unsigned int mbox, int reset)
{
        if (reset) {
                /*
                 * Since we're directing the RESET instead of the firmware
                 * doing it automatically, we need to clear the PCIE_FW.HALT
                 * bit.
                 */
                t4_set_reg_field(adap, PCIE_FW_A, PCIE_FW_HALT_F, 0);

                /*
                 * If we've been given a valid mailbox, first try to get the
                 * firmware to do the RESET.  If that works, great and we can
                 * return success.  Otherwise, if we haven't been given a
                 * valid mailbox or the RESET command failed, fall back to
                 * hitting the chip with a hammer.
                 */
                if (mbox <= PCIE_FW_MASTER_M) {
                        t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, 0);
                        msleep(100);
                        if (t4_fw_reset(adap, mbox,
                                        PIORST_F | PIORSTMODE_F) == 0)
                                return 0;
                }

                t4_write_reg(adap, PL_RST_A, PIORST_F | PIORSTMODE_F);
                msleep(2000);
        } else {
                int ms;

                t4_set_reg_field(adap, CIM_BOOT_CFG_A, UPCRST_F, 0);
                for (ms = 0; ms < FW_CMD_MAX_TIMEOUT; ) {
                        if (!(t4_read_reg(adap, PCIE_FW_A) & PCIE_FW_HALT_F))
                                return 0;
                        msleep(100);
                        ms += 100;
                }
                return -ETIMEDOUT;
        }
        return 0;
}

/**
 *      t4_fw_upgrade - perform all of the steps necessary to upgrade FW
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW RESET command (if desired)
 *      @fw_data: the firmware image to write
 *      @size: image size
 *      @force: force upgrade even if firmware doesn't cooperate
 *
 *      Perform all of the steps necessary for upgrading an adapter's
 *      firmware image.  Normally this requires the cooperation of the
 *      existing firmware in order to halt all existing activities
 *      but if an invalid mailbox token is passed in we skip that step
 *      (though we'll still put the adapter microprocessor into RESET in
 *      that case).
 *
 *      On successful return the new firmware will have been loaded and
 *      the adapter will have been fully RESET losing all previous setup
 *      state.  On unsuccessful return the adapter may be completely hosed ...
 *      positive errno indicates that the adapter is ~probably~ intact, a
 *      negative errno indicates that things are looking bad ...
 */
int t4_fw_upgrade(struct adapter *adap, unsigned int mbox,
                  const u8 *fw_data, unsigned int size, int force)
{
        const struct fw_hdr *fw_hdr = (const struct fw_hdr *)fw_data;
        int reset, ret;

        if (!t4_fw_matches_chip(adap, fw_hdr))
                return -EINVAL;

        /* Disable CXGB4_FW_OK flag so that mbox commands with CXGB4_FW_OK flag
         * set wont be sent when we are flashing FW.
         */
        adap->flags &= ~CXGB4_FW_OK;

        ret = t4_fw_halt(adap, mbox, force);
        if (ret < 0 && !force)
                goto out;

        ret = t4_load_fw(adap, fw_data, size);
        if (ret < 0)
                goto out;

        /*
         * If there was a Firmware Configuration File stored in FLASH,
         * there's a good chance that it won't be compatible with the new
         * Firmware.  In order to prevent difficult to diagnose adapter
         * initialization issues, we clear out the Firmware Configuration File
         * portion of the FLASH .  The user will need to re-FLASH a new
         * Firmware Configuration File which is compatible with the new
         * Firmware if that's desired.
         */
        (void)t4_load_cfg(adap, NULL, 0);

        /*
         * Older versions of the firmware don't understand the new
         * PCIE_FW.HALT flag and so won't know to perform a RESET when they
         * restart.  So for newly loaded older firmware we'll have to do the
         * RESET for it so it starts up on a clean slate.  We can tell if
         * the newly loaded firmware will handle this right by checking
         * its header flags to see if it advertises the capability.
         */
        reset = ((be32_to_cpu(fw_hdr->flags) & FW_HDR_FLAGS_RESET_HALT) == 0);
        ret = t4_fw_restart(adap, mbox, reset);

        /* Grab potentially new Firmware Device Log parameters so we can see
         * how healthy the new Firmware is.  It's okay to contact the new
         * Firmware for these parameters even though, as far as it's
         * concerned, we've never said "HELLO" to it ...
         */
        (void)t4_init_devlog_params(adap);
out:
        adap->flags |= CXGB4_FW_OK;
        return ret;
}

/**
 *      t4_fl_pkt_align - return the fl packet alignment
 *      @adap: the adapter
 *
 *      T4 has a single field to specify the packing and padding boundary.
 *      T5 onwards has separate fields for this and hence the alignment for
 *      next packet offset is maximum of these two.
 *
 */
int t4_fl_pkt_align(struct adapter *adap)
{
        u32 sge_control, sge_control2;
        unsigned int ingpadboundary, ingpackboundary, fl_align, ingpad_shift;

        sge_control = t4_read_reg(adap, SGE_CONTROL_A);

        /* T4 uses a single control field to specify both the PCIe Padding and
         * Packing Boundary.  T5 introduced the ability to specify these
         * separately.  The actual Ingress Packet Data alignment boundary
         * within Packed Buffer Mode is the maximum of these two
         * specifications.  (Note that it makes no real practical sense to
         * have the Padding Boundary be larger than the Packing Boundary but you
         * could set the chip up that way and, in fact, legacy T4 code would
         * end doing this because it would initialize the Padding Boundary and
         * leave the Packing Boundary initialized to 0 (16 bytes).)
         * Padding Boundary values in T6 starts from 8B,
         * where as it is 32B for T4 and T5.
         */
        if (CHELSIO_CHIP_VERSION(adap->params.chip) <= CHELSIO_T5)
                ingpad_shift = INGPADBOUNDARY_SHIFT_X;
        else
                ingpad_shift = T6_INGPADBOUNDARY_SHIFT_X;

        ingpadboundary = 1 << (INGPADBOUNDARY_G(sge_control) + ingpad_shift);

        fl_align = ingpadboundary;
        if (!is_t4(adap->params.chip)) {
                /* T5 has a weird interpretation of one of the PCIe Packing
                 * Boundary values.  No idea why ...
                 */
                sge_control2 = t4_read_reg(adap, SGE_CONTROL2_A);
                ingpackboundary = INGPACKBOUNDARY_G(sge_control2);
                if (ingpackboundary == INGPACKBOUNDARY_16B_X)
                        ingpackboundary = 16;
                else
                        ingpackboundary = 1 << (ingpackboundary +
                                                INGPACKBOUNDARY_SHIFT_X);

                fl_align = max(ingpadboundary, ingpackboundary);
        }
        return fl_align;
}

/**
 *      t4_fixup_host_params - fix up host-dependent parameters
 *      @adap: the adapter
 *      @page_size: the host's Base Page Size
 *      @cache_line_size: the host's Cache Line Size
 *
 *      Various registers in T4 contain values which are dependent on the
 *      host's Base Page and Cache Line Sizes.  This function will fix all of
 *      those registers with the appropriate values as passed in ...
 */
int t4_fixup_host_params(struct adapter *adap, unsigned int page_size,
                         unsigned int cache_line_size)
{
        unsigned int page_shift = fls(page_size) - 1;
        unsigned int sge_hps = page_shift - 10;
        unsigned int stat_len = cache_line_size > 64 ? 128 : 64;
        unsigned int fl_align = cache_line_size < 32 ? 32 : cache_line_size;
        unsigned int fl_align_log = fls(fl_align) - 1;

        t4_write_reg(adap, SGE_HOST_PAGE_SIZE_A,
                     HOSTPAGESIZEPF0_V(sge_hps) |
                     HOSTPAGESIZEPF1_V(sge_hps) |
                     HOSTPAGESIZEPF2_V(sge_hps) |
                     HOSTPAGESIZEPF3_V(sge_hps) |
                     HOSTPAGESIZEPF4_V(sge_hps) |
                     HOSTPAGESIZEPF5_V(sge_hps) |
                     HOSTPAGESIZEPF6_V(sge_hps) |
                     HOSTPAGESIZEPF7_V(sge_hps));

        if (is_t4(adap->params.chip)) {
                t4_set_reg_field(adap, SGE_CONTROL_A,
                                 INGPADBOUNDARY_V(INGPADBOUNDARY_M) |
                                 EGRSTATUSPAGESIZE_F,
                                 INGPADBOUNDARY_V(fl_align_log -
                                                  INGPADBOUNDARY_SHIFT_X) |
                                 EGRSTATUSPAGESIZE_V(stat_len != 64));
        } else {
                unsigned int pack_align;
                unsigned int ingpad, ingpack;

                /* T5 introduced the separation of the Free List Padding and
                 * Packing Boundaries.  Thus, we can select a smaller Padding
                 * Boundary to avoid uselessly chewing up PCIe Link and Memory
                 * Bandwidth, and use a Packing Boundary which is large enough
                 * to avoid false sharing between CPUs, etc.
                 *
                 * For the PCI Link, the smaller the Padding Boundary the
                 * better.  For the Memory Controller, a smaller Padding
                 * Boundary is better until we cross under the Memory Line
                 * Size (the minimum unit of transfer to/from Memory).  If we
                 * have a Padding Boundary which is smaller than the Memory
                 * Line Size, that'll involve a Read-Modify-Write cycle on the
                 * Memory Controller which is never good.
                 */

                /* We want the Packing Boundary to be based on the Cache Line
                 * Size in order to help avoid False Sharing performance
                 * issues between CPUs, etc.  We also want the Packing
                 * Boundary to incorporate the PCI-E Maximum Payload Size.  We
                 * get best performance when the Packing Boundary is a
                 * multiple of the Maximum Payload Size.
                 */
                pack_align = fl_align;
                if (pci_is_pcie(adap->pdev)) {
                        unsigned int mps, mps_log;
                        u16 devctl;

                        /* The PCIe Device Control Maximum Payload Size field
                         * [bits 7:5] encodes sizes as powers of 2 starting at
                         * 128 bytes.
                         */
                        pcie_capability_read_word(adap->pdev, PCI_EXP_DEVCTL,
                                                  &devctl);
                        mps_log = ((devctl & PCI_EXP_DEVCTL_PAYLOAD) >> 5) + 7;
                        mps = 1 << mps_log;
                        if (mps > pack_align)
                                pack_align = mps;
                }

                /* N.B. T5/T6 have a crazy special interpretation of the "0"
                 * value for the Packing Boundary.  This corresponds to 16
                 * bytes instead of the expected 32 bytes.  So if we want 32
                 * bytes, the best we can really do is 64 bytes ...
                 */
                if (pack_align <= 16) {
                        ingpack = INGPACKBOUNDARY_16B_X;
                        fl_align = 16;
                } else if (pack_align == 32) {
                        ingpack = INGPACKBOUNDARY_64B_X;
                        fl_align = 64;
                } else {
                        unsigned int pack_align_log = fls(pack_align) - 1;

                        ingpack = pack_align_log - INGPACKBOUNDARY_SHIFT_X;
                        fl_align = pack_align;
                }

                /* Use the smallest Ingress Padding which isn't smaller than
                 * the Memory Controller Read/Write Size.  We'll take that as
                 * being 8 bytes since we don't know of any system with a
                 * wider Memory Controller Bus Width.
                 */
                if (is_t5(adap->params.chip))
                        ingpad = INGPADBOUNDARY_32B_X;
                else
                        ingpad = T6_INGPADBOUNDARY_8B_X;

                t4_set_reg_field(adap, SGE_CONTROL_A,
                                 INGPADBOUNDARY_V(INGPADBOUNDARY_M) |
                                 EGRSTATUSPAGESIZE_F,
                                 INGPADBOUNDARY_V(ingpad) |
                                 EGRSTATUSPAGESIZE_V(stat_len != 64));
                t4_set_reg_field(adap, SGE_CONTROL2_A,
                                 INGPACKBOUNDARY_V(INGPACKBOUNDARY_M),
                                 INGPACKBOUNDARY_V(ingpack));
        }
        /*
         * Adjust various SGE Free List Host Buffer Sizes.
         *
         * This is something of a crock since we're using fixed indices into
         * the array which are also known by the sge.c code and the T4
         * Firmware Configuration File.  We need to come up with a much better
         * approach to managing this array.  For now, the first four entries
         * are:
         *
         *   0: Host Page Size
         *   1: 64KB
         *   2: Buffer size corresponding to 1500 byte MTU (unpacked mode)
         *   3: Buffer size corresponding to 9000 byte MTU (unpacked mode)
         *
         * For the single-MTU buffers in unpacked mode we need to include
         * space for the SGE Control Packet Shift, 14 byte Ethernet header,
         * possible 4 byte VLAN tag, all rounded up to the next Ingress Packet
         * Padding boundary.  All of these are accommodated in the Factory
         * Default Firmware Configuration File but we need to adjust it for
         * this host's cache line size.
         */
        t4_write_reg(adap, SGE_FL_BUFFER_SIZE0_A, page_size);
        t4_write_reg(adap, SGE_FL_BUFFER_SIZE2_A,
                     (t4_read_reg(adap, SGE_FL_BUFFER_SIZE2_A) + fl_align-1)
                     & ~(fl_align-1));
        t4_write_reg(adap, SGE_FL_BUFFER_SIZE3_A,
                     (t4_read_reg(adap, SGE_FL_BUFFER_SIZE3_A) + fl_align-1)
                     & ~(fl_align-1));

        t4_write_reg(adap, ULP_RX_TDDP_PSZ_A, HPZ0_V(page_shift - 12));

        return 0;
}

/**
 *      t4_fw_initialize - ask FW to initialize the device
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *
 *      Issues a command to FW to partially initialize the device.  This
 *      performs initialization that generally doesn't depend on user input.
 */
int t4_fw_initialize(struct adapter *adap, unsigned int mbox)
{
        struct fw_initialize_cmd c;

        memset(&c, 0, sizeof(c));
        INIT_CMD(c, INITIALIZE, WRITE);
        return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_query_params_rw - query FW or device parameters
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @pf: the PF
 *      @vf: the VF
 *      @nparams: the number of parameters
 *      @params: the parameter names
 *      @val: the parameter values
 *      @rw: Write and read flag
 *      @sleep_ok: if true, we may sleep awaiting mbox cmd completion
 *
 *      Reads the value of FW or device parameters.  Up to 7 parameters can be
 *      queried at once.
 */
int t4_query_params_rw(struct adapter *adap, unsigned int mbox, unsigned int pf,
                       unsigned int vf, unsigned int nparams, const u32 *params,
                       u32 *val, int rw, bool sleep_ok)
{
        int i, ret;
        struct fw_params_cmd c;
        __be32 *p = &c.param[0].mnem;

        if (nparams > 7)
                return -EINVAL;

        memset(&c, 0, sizeof(c));
        c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) |
                                  FW_CMD_REQUEST_F | FW_CMD_READ_F |
                                  FW_PARAMS_CMD_PFN_V(pf) |
                                  FW_PARAMS_CMD_VFN_V(vf));
        c.retval_len16 = cpu_to_be32(FW_LEN16(c));

        for (i = 0; i < nparams; i++) {
                *p++ = cpu_to_be32(*params++);
                if (rw)
                        *p = cpu_to_be32(*(val + i));
                p++;
        }

        ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok);
        if (ret == 0)
                for (i = 0, p = &c.param[0].val; i < nparams; i++, p += 2)
                        *val++ = be32_to_cpu(*p);
        return ret;
}

int t4_query_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
                    unsigned int vf, unsigned int nparams, const u32 *params,
                    u32 *val)
{
        return t4_query_params_rw(adap, mbox, pf, vf, nparams, params, val, 0,
                                  true);
}

int t4_query_params_ns(struct adapter *adap, unsigned int mbox, unsigned int pf,
                       unsigned int vf, unsigned int nparams, const u32 *params,
                       u32 *val)
{
        return t4_query_params_rw(adap, mbox, pf, vf, nparams, params, val, 0,
                                  false);
}

/**
 *      t4_set_params_timeout - sets FW or device parameters
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @pf: the PF
 *      @vf: the VF
 *      @nparams: the number of parameters
 *      @params: the parameter names
 *      @val: the parameter values
 *      @timeout: the timeout time
 *
 *      Sets the value of FW or device parameters.  Up to 7 parameters can be
 *      specified at once.
 */
int t4_set_params_timeout(struct adapter *adap, unsigned int mbox,
                          unsigned int pf, unsigned int vf,
                          unsigned int nparams, const u32 *params,
                          const u32 *val, int timeout)
{
        struct fw_params_cmd c;
        __be32 *p = &c.param[0].mnem;

        if (nparams > 7)
                return -EINVAL;

        memset(&c, 0, sizeof(c));
        c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PARAMS_CMD) |
                                  FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
                                  FW_PARAMS_CMD_PFN_V(pf) |
                                  FW_PARAMS_CMD_VFN_V(vf));
        c.retval_len16 = cpu_to_be32(FW_LEN16(c));

        while (nparams--) {
                *p++ = cpu_to_be32(*params++);
                *p++ = cpu_to_be32(*val++);
        }

        return t4_wr_mbox_timeout(adap, mbox, &c, sizeof(c), NULL, timeout);
}

/**
 *      t4_set_params - sets FW or device parameters
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @pf: the PF
 *      @vf: the VF
 *      @nparams: the number of parameters
 *      @params: the parameter names
 *      @val: the parameter values
 *
 *      Sets the value of FW or device parameters.  Up to 7 parameters can be
 *      specified at once.
 */
int t4_set_params(struct adapter *adap, unsigned int mbox, unsigned int pf,
                  unsigned int vf, unsigned int nparams, const u32 *params,
                  const u32 *val)
{
        return t4_set_params_timeout(adap, mbox, pf, vf, nparams, params, val,
                                     FW_CMD_MAX_TIMEOUT);
}

/**
 *      t4_cfg_pfvf - configure PF/VF resource limits
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @pf: the PF being configured
 *      @vf: the VF being configured
 *      @txq: the max number of egress queues
 *      @txq_eth_ctrl: the max number of egress Ethernet or control queues
 *      @rxqi: the max number of interrupt-capable ingress queues
 *      @rxq: the max number of interruptless ingress queues
 *      @tc: the PCI traffic class
 *      @vi: the max number of virtual interfaces
 *      @cmask: the channel access rights mask for the PF/VF
 *      @pmask: the port access rights mask for the PF/VF
 *      @nexact: the maximum number of exact MPS filters
 *      @rcaps: read capabilities
 *      @wxcaps: write/execute capabilities
 *
 *      Configures resource limits and capabilities for a physical or virtual
 *      function.
 */
int t4_cfg_pfvf(struct adapter *adap, unsigned int mbox, unsigned int pf,
                unsigned int vf, unsigned int txq, unsigned int txq_eth_ctrl,
                unsigned int rxqi, unsigned int rxq, unsigned int tc,
                unsigned int vi, unsigned int cmask, unsigned int pmask,
                unsigned int nexact, unsigned int rcaps, unsigned int wxcaps)
{
        struct fw_pfvf_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_PFVF_CMD) | FW_CMD_REQUEST_F |
                                  FW_CMD_WRITE_F | FW_PFVF_CMD_PFN_V(pf) |
                                  FW_PFVF_CMD_VFN_V(vf));
        c.retval_len16 = cpu_to_be32(FW_LEN16(c));
        c.niqflint_niq = cpu_to_be32(FW_PFVF_CMD_NIQFLINT_V(rxqi) |
                                     FW_PFVF_CMD_NIQ_V(rxq));
        c.type_to_neq = cpu_to_be32(FW_PFVF_CMD_CMASK_V(cmask) |
                                    FW_PFVF_CMD_PMASK_V(pmask) |
                                    FW_PFVF_CMD_NEQ_V(txq));
        c.tc_to_nexactf = cpu_to_be32(FW_PFVF_CMD_TC_V(tc) |
                                      FW_PFVF_CMD_NVI_V(vi) |
                                      FW_PFVF_CMD_NEXACTF_V(nexact));
        c.r_caps_to_nethctrl = cpu_to_be32(FW_PFVF_CMD_R_CAPS_V(rcaps) |
                                        FW_PFVF_CMD_WX_CAPS_V(wxcaps) |
                                        FW_PFVF_CMD_NETHCTRL_V(txq_eth_ctrl));
        return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_alloc_vi - allocate a virtual interface
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @port: physical port associated with the VI
 *      @pf: the PF owning the VI
 *      @vf: the VF owning the VI
 *      @nmac: number of MAC addresses needed (1 to 5)
 *      @mac: the MAC addresses of the VI
 *      @rss_size: size of RSS table slice associated with this VI
 *      @vivld: the destination to store the VI Valid value.
 *      @vin: the destination to store the VIN value.
 *
 *      Allocates a virtual interface for the given physical port.  If @mac is
 *      not %NULL it contains the MAC addresses of the VI as assigned by FW.
 *      @mac should be large enough to hold @nmac Ethernet addresses, they are
 *      stored consecutively so the space needed is @nmac * 6 bytes.
 *      Returns a negative error number or the non-negative VI id.
 */
int t4_alloc_vi(struct adapter *adap, unsigned int mbox, unsigned int port,
                unsigned int pf, unsigned int vf, unsigned int nmac, u8 *mac,
                unsigned int *rss_size, u8 *vivld, u8 *vin)
{
        int ret;
        struct fw_vi_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_VI_CMD) | FW_CMD_REQUEST_F |
                                  FW_CMD_WRITE_F | FW_CMD_EXEC_F |
                                  FW_VI_CMD_PFN_V(pf) | FW_VI_CMD_VFN_V(vf));
        c.alloc_to_len16 = cpu_to_be32(FW_VI_CMD_ALLOC_F | FW_LEN16(c));
        c.portid_pkd = FW_VI_CMD_PORTID_V(port);
        c.nmac = nmac - 1;

        ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
        if (ret)
                return ret;

        if (mac) {
                memcpy(mac, c.mac, sizeof(c.mac));
                switch (nmac) {
                case 5:
                        memcpy(mac + 24, c.nmac3, sizeof(c.nmac3));
                        fallthrough;
                case 4:
                        memcpy(mac + 18, c.nmac2, sizeof(c.nmac2));
                        fallthrough;
                case 3:
                        memcpy(mac + 12, c.nmac1, sizeof(c.nmac1));
                        fallthrough;
                case 2:
                        memcpy(mac + 6,  c.nmac0, sizeof(c.nmac0));
                }
        }
        if (rss_size)
                *rss_size = FW_VI_CMD_RSSSIZE_G(be16_to_cpu(c.rsssize_pkd));

        if (vivld)
                *vivld = FW_VI_CMD_VFVLD_G(be32_to_cpu(c.alloc_to_len16));

        if (vin)
                *vin = FW_VI_CMD_VIN_G(be32_to_cpu(c.alloc_to_len16));

        return FW_VI_CMD_VIID_G(be16_to_cpu(c.type_viid));
}

/**
 *      t4_free_vi - free a virtual interface
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @pf: the PF owning the VI
 *      @vf: the VF owning the VI
 *      @viid: virtual interface identifiler
 *
 *      Free a previously allocated virtual interface.
 */
int t4_free_vi(struct adapter *adap, unsigned int mbox, unsigned int pf,
               unsigned int vf, unsigned int viid)
{
        struct fw_vi_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_VI_CMD) |
                                  FW_CMD_REQUEST_F |
                                  FW_CMD_EXEC_F |
                                  FW_VI_CMD_PFN_V(pf) |
                                  FW_VI_CMD_VFN_V(vf));
        c.alloc_to_len16 = cpu_to_be32(FW_VI_CMD_FREE_F | FW_LEN16(c));
        c.type_viid = cpu_to_be16(FW_VI_CMD_VIID_V(viid));

        return t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
}

/**
 *      t4_set_rxmode - set Rx properties of a virtual interface
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @viid: the VI id
 *      @viid_mirror: the mirror VI id
 *      @mtu: the new MTU or -1
 *      @promisc: 1 to enable promiscuous mode, 0 to disable it, -1 no change
 *      @all_multi: 1 to enable all-multi mode, 0 to disable it, -1 no change
 *      @bcast: 1 to enable broadcast Rx, 0 to disable it, -1 no change
 *      @vlanex: 1 to enable HW VLAN extraction, 0 to disable it, -1 no change
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Sets Rx properties of a virtual interface.
 */
int t4_set_rxmode(struct adapter *adap, unsigned int mbox, unsigned int viid,
                  unsigned int viid_mirror, int mtu, int promisc, int all_multi,
                  int bcast, int vlanex, bool sleep_ok)
{
        struct fw_vi_rxmode_cmd c, c_mirror;
        int ret;

        /* convert to FW values */
        if (mtu < 0)
                mtu = FW_RXMODE_MTU_NO_CHG;
        if (promisc < 0)
                promisc = FW_VI_RXMODE_CMD_PROMISCEN_M;
        if (all_multi < 0)
                all_multi = FW_VI_RXMODE_CMD_ALLMULTIEN_M;
        if (bcast < 0)
                bcast = FW_VI_RXMODE_CMD_BROADCASTEN_M;
        if (vlanex < 0)
                vlanex = FW_VI_RXMODE_CMD_VLANEXEN_M;

        memset(&c, 0, sizeof(c));
        c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_RXMODE_CMD) |
                                   FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
                                   FW_VI_RXMODE_CMD_VIID_V(viid));
        c.retval_len16 = cpu_to_be32(FW_LEN16(c));
        c.mtu_to_vlanexen =
                cpu_to_be32(FW_VI_RXMODE_CMD_MTU_V(mtu) |
                            FW_VI_RXMODE_CMD_PROMISCEN_V(promisc) |
                            FW_VI_RXMODE_CMD_ALLMULTIEN_V(all_multi) |
                            FW_VI_RXMODE_CMD_BROADCASTEN_V(bcast) |
                            FW_VI_RXMODE_CMD_VLANEXEN_V(vlanex));

        if (viid_mirror) {
                memcpy(&c_mirror, &c, sizeof(c_mirror));
                c_mirror.op_to_viid =
                        cpu_to_be32(FW_CMD_OP_V(FW_VI_RXMODE_CMD) |
                                    FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
                                    FW_VI_RXMODE_CMD_VIID_V(viid_mirror));
        }

        ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok);
        if (ret)
                return ret;

        if (viid_mirror)
                ret = t4_wr_mbox_meat(adap, mbox, &c_mirror, sizeof(c_mirror),
                                      NULL, sleep_ok);

        return ret;
}

/**
 *      t4_free_encap_mac_filt - frees MPS entry at given index
 *      @adap: the adapter
 *      @viid: the VI id
 *      @idx: index of MPS entry to be freed
 *      @sleep_ok: call is allowed to sleep
 *
 *      Frees the MPS entry at supplied index
 *
 *      Returns a negative error number or zero on success
 */
int t4_free_encap_mac_filt(struct adapter *adap, unsigned int viid,
                           int idx, bool sleep_ok)
{
        struct fw_vi_mac_exact *p;
        struct fw_vi_mac_cmd c;
        int ret = 0;
        u32 exact;

        memset(&c, 0, sizeof(c));
        c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
                                   FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
                                   FW_CMD_EXEC_V(0) |
                                   FW_VI_MAC_CMD_VIID_V(viid));
        exact = FW_VI_MAC_CMD_ENTRY_TYPE_V(FW_VI_MAC_TYPE_EXACTMAC);
        c.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(0) |
                                          exact |
                                          FW_CMD_LEN16_V(1));
        p = c.u.exact;
        p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID_F |
                                      FW_VI_MAC_CMD_IDX_V(idx));
        eth_zero_addr(p->macaddr);
        ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
        return ret;
}

/**
 *      t4_free_raw_mac_filt - Frees a raw mac entry in mps tcam
 *      @adap: the adapter
 *      @viid: the VI id
 *      @addr: the MAC address
 *      @mask: the mask
 *      @idx: index of the entry in mps tcam
 *      @lookup_type: MAC address for inner (1) or outer (0) header
 *      @port_id: the port index
 *      @sleep_ok: call is allowed to sleep
 *
 *      Removes the mac entry at the specified index using raw mac interface.
 *
 *      Returns a negative error number on failure.
 */
int t4_free_raw_mac_filt(struct adapter *adap, unsigned int viid,
                         const u8 *addr, const u8 *mask, unsigned int idx,
                         u8 lookup_type, u8 port_id, bool sleep_ok)
{
        struct fw_vi_mac_cmd c;
        struct fw_vi_mac_raw *p = &c.u.raw;
        u32 val;

        memset(&c, 0, sizeof(c));
        c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
                                   FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
                                   FW_CMD_EXEC_V(0) |
                                   FW_VI_MAC_CMD_VIID_V(viid));
        val = FW_CMD_LEN16_V(1) |
              FW_VI_MAC_CMD_ENTRY_TYPE_V(FW_VI_MAC_TYPE_RAW);
        c.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(0) |
                                          FW_CMD_LEN16_V(val));

        p->raw_idx_pkd = cpu_to_be32(FW_VI_MAC_CMD_RAW_IDX_V(idx) |
                                     FW_VI_MAC_ID_BASED_FREE);

        /* Lookup Type. Outer header: 0, Inner header: 1 */
        p->data0_pkd = cpu_to_be32(DATALKPTYPE_V(lookup_type) |
                                   DATAPORTNUM_V(port_id));
        /* Lookup mask and port mask */
        p->data0m_pkd = cpu_to_be64(DATALKPTYPE_V(DATALKPTYPE_M) |
                                    DATAPORTNUM_V(DATAPORTNUM_M));

        /* Copy the address and the mask */
        memcpy((u8 *)&p->data1[0] + 2, addr, ETH_ALEN);
        memcpy((u8 *)&p->data1m[0] + 2, mask, ETH_ALEN);

        return t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
}

/**
 *      t4_alloc_encap_mac_filt - Adds a mac entry in mps tcam with VNI support
 *      @adap: the adapter
 *      @viid: the VI id
 *      @addr: the MAC address
 *      @mask: the mask
 *      @vni: the VNI id for the tunnel protocol
 *      @vni_mask: mask for the VNI id
 *      @dip_hit: to enable DIP match for the MPS entry
 *      @lookup_type: MAC address for inner (1) or outer (0) header
 *      @sleep_ok: call is allowed to sleep
 *
 *      Allocates an MPS entry with specified MAC address and VNI value.
 *
 *      Returns a negative error number or the allocated index for this mac.
 */
int t4_alloc_encap_mac_filt(struct adapter *adap, unsigned int viid,
                            const u8 *addr, const u8 *mask, unsigned int vni,
                            unsigned int vni_mask, u8 dip_hit, u8 lookup_type,
                            bool sleep_ok)
{
        struct fw_vi_mac_cmd c;
        struct fw_vi_mac_vni *p = c.u.exact_vni;
        int ret = 0;
        u32 val;

        memset(&c, 0, sizeof(c));
        c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
                                   FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
                                   FW_VI_MAC_CMD_VIID_V(viid));
        val = FW_CMD_LEN16_V(1) |
              FW_VI_MAC_CMD_ENTRY_TYPE_V(FW_VI_MAC_TYPE_EXACTMAC_VNI);
        c.freemacs_to_len16 = cpu_to_be32(val);
        p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID_F |
                                      FW_VI_MAC_CMD_IDX_V(FW_VI_MAC_ADD_MAC));
        memcpy(p->macaddr, addr, sizeof(p->macaddr));
        memcpy(p->macaddr_mask, mask, sizeof(p->macaddr_mask));

        p->lookup_type_to_vni =
                cpu_to_be32(FW_VI_MAC_CMD_VNI_V(vni) |
                            FW_VI_MAC_CMD_DIP_HIT_V(dip_hit) |
                            FW_VI_MAC_CMD_LOOKUP_TYPE_V(lookup_type));
        p->vni_mask_pkd = cpu_to_be32(FW_VI_MAC_CMD_VNI_MASK_V(vni_mask));
        ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
        if (ret == 0)
                ret = FW_VI_MAC_CMD_IDX_G(be16_to_cpu(p->valid_to_idx));
        return ret;
}

/**
 *      t4_alloc_raw_mac_filt - Adds a mac entry in mps tcam
 *      @adap: the adapter
 *      @viid: the VI id
 *      @addr: the MAC address
 *      @mask: the mask
 *      @idx: index at which to add this entry
 *      @lookup_type: MAC address for inner (1) or outer (0) header
 *      @port_id: the port index
 *      @sleep_ok: call is allowed to sleep
 *
 *      Adds the mac entry at the specified index using raw mac interface.
 *
 *      Returns a negative error number or the allocated index for this mac.
 */
int t4_alloc_raw_mac_filt(struct adapter *adap, unsigned int viid,
                          const u8 *addr, const u8 *mask, unsigned int idx,
                          u8 lookup_type, u8 port_id, bool sleep_ok)
{
        int ret = 0;
        struct fw_vi_mac_cmd c;
        struct fw_vi_mac_raw *p = &c.u.raw;
        u32 val;

        memset(&c, 0, sizeof(c));
        c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
                                   FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
                                   FW_VI_MAC_CMD_VIID_V(viid));
        val = FW_CMD_LEN16_V(1) |
              FW_VI_MAC_CMD_ENTRY_TYPE_V(FW_VI_MAC_TYPE_RAW);
        c.freemacs_to_len16 = cpu_to_be32(val);

        /* Specify that this is an inner mac address */
        p->raw_idx_pkd = cpu_to_be32(FW_VI_MAC_CMD_RAW_IDX_V(idx));

        /* Lookup Type. Outer header: 0, Inner header: 1 */
        p->data0_pkd = cpu_to_be32(DATALKPTYPE_V(lookup_type) |
                                   DATAPORTNUM_V(port_id));
        /* Lookup mask and port mask */
        p->data0m_pkd = cpu_to_be64(DATALKPTYPE_V(DATALKPTYPE_M) |
                                    DATAPORTNUM_V(DATAPORTNUM_M));

        /* Copy the address and the mask */
        memcpy((u8 *)&p->data1[0] + 2, addr, ETH_ALEN);
        memcpy((u8 *)&p->data1m[0] + 2, mask, ETH_ALEN);

        ret = t4_wr_mbox_meat(adap, adap->mbox, &c, sizeof(c), &c, sleep_ok);
        if (ret == 0) {
                ret = FW_VI_MAC_CMD_RAW_IDX_G(be32_to_cpu(p->raw_idx_pkd));
                if (ret != idx)
                        ret = -ENOMEM;
        }

        return ret;
}

/**
 *      t4_alloc_mac_filt - allocates exact-match filters for MAC addresses
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @viid: the VI id
 *      @free: if true any existing filters for this VI id are first removed
 *      @naddr: the number of MAC addresses to allocate filters for (up to 7)
 *      @addr: the MAC address(es)
 *      @idx: where to store the index of each allocated filter
 *      @hash: pointer to hash address filter bitmap
 *      @sleep_ok: call is allowed to sleep
 *
 *      Allocates an exact-match filter for each of the supplied addresses and
 *      sets it to the corresponding address.  If @idx is not %NULL it should
 *      have at least @naddr entries, each of which will be set to the index of
 *      the filter allocated for the corresponding MAC address.  If a filter
 *      could not be allocated for an address its index is set to 0xffff.
 *      If @hash is not %NULL addresses that fail to allocate an exact filter
 *      are hashed and update the hash filter bitmap pointed at by @hash.
 *
 *      Returns a negative error number or the number of filters allocated.
 */
int t4_alloc_mac_filt(struct adapter *adap, unsigned int mbox,
                      unsigned int viid, bool free, unsigned int naddr,
                      const u8 **addr, u16 *idx, u64 *hash, bool sleep_ok)
{
        int offset, ret = 0;
        struct fw_vi_mac_cmd c;
        unsigned int nfilters = 0;
        unsigned int max_naddr = adap->params.arch.mps_tcam_size;
        unsigned int rem = naddr;

        if (naddr > max_naddr)
                return -EINVAL;

        for (offset = 0; offset < naddr ; /**/) {
                unsigned int fw_naddr = (rem < ARRAY_SIZE(c.u.exact) ?
                                         rem : ARRAY_SIZE(c.u.exact));
                size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
                                                     u.exact[fw_naddr]), 16);
                struct fw_vi_mac_exact *p;
                int i;

                memset(&c, 0, sizeof(c));
                c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
                                           FW_CMD_REQUEST_F |
                                           FW_CMD_WRITE_F |
                                           FW_CMD_EXEC_V(free) |
                                           FW_VI_MAC_CMD_VIID_V(viid));
                c.freemacs_to_len16 =
                        cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(free) |
                                    FW_CMD_LEN16_V(len16));

                for (i = 0, p = c.u.exact; i < fw_naddr; i++, p++) {
                        p->valid_to_idx =
                                cpu_to_be16(FW_VI_MAC_CMD_VALID_F |
                                            FW_VI_MAC_CMD_IDX_V(
                                                    FW_VI_MAC_ADD_MAC));
                        memcpy(p->macaddr, addr[offset + i],
                               sizeof(p->macaddr));
                }

                /* It's okay if we run out of space in our MAC address arena.
                 * Some of the addresses we submit may get stored so we need
                 * to run through the reply to see what the results were ...
                 */
                ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok);
                if (ret && ret != -FW_ENOMEM)
                        break;

                for (i = 0, p = c.u.exact; i < fw_naddr; i++, p++) {
                        u16 index = FW_VI_MAC_CMD_IDX_G(
                                        be16_to_cpu(p->valid_to_idx));

                        if (idx)
                                idx[offset + i] = (index >= max_naddr ?
                                                   0xffff : index);
                        if (index < max_naddr)
                                nfilters++;
                        else if (hash)
                                *hash |= (1ULL <<
                                          hash_mac_addr(addr[offset + i]));
                }

                free = false;
                offset += fw_naddr;
                rem -= fw_naddr;
        }

        if (ret == 0 || ret == -FW_ENOMEM)
                ret = nfilters;
        return ret;
}

/**
 *      t4_free_mac_filt - frees exact-match filters of given MAC addresses
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @viid: the VI id
 *      @naddr: the number of MAC addresses to allocate filters for (up to 7)
 *      @addr: the MAC address(es)
 *      @sleep_ok: call is allowed to sleep
 *
 *      Frees the exact-match filter for each of the supplied addresses
 *
 *      Returns a negative error number or the number of filters freed.
 */
int t4_free_mac_filt(struct adapter *adap, unsigned int mbox,
                     unsigned int viid, unsigned int naddr,
                     const u8 **addr, bool sleep_ok)
{
        int offset, ret = 0;
        struct fw_vi_mac_cmd c;
        unsigned int nfilters = 0;
        unsigned int max_naddr = is_t4(adap->params.chip) ?
                                       NUM_MPS_CLS_SRAM_L_INSTANCES :
                                       NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
        unsigned int rem = naddr;

        if (naddr > max_naddr)
                return -EINVAL;

        for (offset = 0; offset < (int)naddr ; /**/) {
                unsigned int fw_naddr = (rem < ARRAY_SIZE(c.u.exact)
                                         ? rem
                                         : ARRAY_SIZE(c.u.exact));
                size_t len16 = DIV_ROUND_UP(offsetof(struct fw_vi_mac_cmd,
                                                     u.exact[fw_naddr]), 16);
                struct fw_vi_mac_exact *p;
                int i;

                memset(&c, 0, sizeof(c));
                c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
                                     FW_CMD_REQUEST_F |
                                     FW_CMD_WRITE_F |
                                     FW_CMD_EXEC_V(0) |
                                     FW_VI_MAC_CMD_VIID_V(viid));
                c.freemacs_to_len16 =
                                cpu_to_be32(FW_VI_MAC_CMD_FREEMACS_V(0) |
                                            FW_CMD_LEN16_V(len16));

                for (i = 0, p = c.u.exact; i < (int)fw_naddr; i++, p++) {
                        p->valid_to_idx = cpu_to_be16(
                                FW_VI_MAC_CMD_VALID_F |
                                FW_VI_MAC_CMD_IDX_V(FW_VI_MAC_MAC_BASED_FREE));
                        memcpy(p->macaddr, addr[offset+i], sizeof(p->macaddr));
                }

                ret = t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), &c, sleep_ok);
                if (ret)
                        break;

                for (i = 0, p = c.u.exact; i < fw_naddr; i++, p++) {
                        u16 index = FW_VI_MAC_CMD_IDX_G(
                                                be16_to_cpu(p->valid_to_idx));

                        if (index < max_naddr)
                                nfilters++;
                }

                offset += fw_naddr;
                rem -= fw_naddr;
        }

        if (ret == 0)
                ret = nfilters;
        return ret;
}

/**
 *      t4_change_mac - modifies the exact-match filter for a MAC address
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @viid: the VI id
 *      @idx: index of existing filter for old value of MAC address, or -1
 *      @addr: the new MAC address value
 *      @persist: whether a new MAC allocation should be persistent
 *      @smt_idx: the destination to store the new SMT index.
 *
 *      Modifies an exact-match filter and sets it to the new MAC address.
 *      Note that in general it is not possible to modify the value of a given
 *      filter so the generic way to modify an address filter is to free the one
 *      being used by the old address value and allocate a new filter for the
 *      new address value.  @idx can be -1 if the address is a new addition.
 *
 *      Returns a negative error number or the index of the filter with the new
 *      MAC value.
 */
int t4_change_mac(struct adapter *adap, unsigned int mbox, unsigned int viid,
                  int idx, const u8 *addr, bool persist, u8 *smt_idx)
{
        int ret, mode;
        struct fw_vi_mac_cmd c;
        struct fw_vi_mac_exact *p = c.u.exact;
        unsigned int max_mac_addr = adap->params.arch.mps_tcam_size;

        if (idx < 0)                             /* new allocation */
                idx = persist ? FW_VI_MAC_ADD_PERSIST_MAC : FW_VI_MAC_ADD_MAC;
        mode = smt_idx ? FW_VI_MAC_SMT_AND_MPSTCAM : FW_VI_MAC_MPS_TCAM_ENTRY;

        memset(&c, 0, sizeof(c));
        c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
                                   FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
                                   FW_VI_MAC_CMD_VIID_V(viid));
        c.freemacs_to_len16 = cpu_to_be32(FW_CMD_LEN16_V(1));
        p->valid_to_idx = cpu_to_be16(FW_VI_MAC_CMD_VALID_F |
                                      FW_VI_MAC_CMD_SMAC_RESULT_V(mode) |
                                      FW_VI_MAC_CMD_IDX_V(idx));
        memcpy(p->macaddr, addr, sizeof(p->macaddr));

        ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
        if (ret == 0) {
                ret = FW_VI_MAC_CMD_IDX_G(be16_to_cpu(p->valid_to_idx));
                if (ret >= max_mac_addr)
                        ret = -ENOMEM;
                if (smt_idx) {
                        if (adap->params.viid_smt_extn_support) {
                                *smt_idx = FW_VI_MAC_CMD_SMTID_G
                                                    (be32_to_cpu(c.op_to_viid));
                        } else {
                                /* In T4/T5, SMT contains 256 SMAC entries
                                 * organized in 128 rows of 2 entries each.
                                 * In T6, SMT contains 256 SMAC entries in
                                 * 256 rows.
                                 */
                                if (CHELSIO_CHIP_VERSION(adap->params.chip) <=
                                                                     CHELSIO_T5)
                                        *smt_idx = (viid & FW_VIID_VIN_M) << 1;
                                else
                                        *smt_idx = (viid & FW_VIID_VIN_M);
                        }
                }
        }
        return ret;
}

/**
 *      t4_set_addr_hash - program the MAC inexact-match hash filter
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @viid: the VI id
 *      @ucast: whether the hash filter should also match unicast addresses
 *      @vec: the value to be written to the hash filter
 *      @sleep_ok: call is allowed to sleep
 *
 *      Sets the 64-bit inexact-match hash filter for a virtual interface.
 */
int t4_set_addr_hash(struct adapter *adap, unsigned int mbox, unsigned int viid,
                     bool ucast, u64 vec, bool sleep_ok)
{
        struct fw_vi_mac_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_MAC_CMD) |
                                   FW_CMD_REQUEST_F | FW_CMD_WRITE_F |
                                   FW_VI_ENABLE_CMD_VIID_V(viid));
        c.freemacs_to_len16 = cpu_to_be32(FW_VI_MAC_CMD_HASHVECEN_F |
                                          FW_VI_MAC_CMD_HASHUNIEN_V(ucast) |
                                          FW_CMD_LEN16_V(1));
        c.u.hash.hashvec = cpu_to_be64(vec);
        return t4_wr_mbox_meat(adap, mbox, &c, sizeof(c), NULL, sleep_ok);
}

/**
 *      t4_enable_vi_params - enable/disable a virtual interface
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @viid: the VI id
 *      @rx_en: 1=enable Rx, 0=disable Rx
 *      @tx_en: 1=enable Tx, 0=disable Tx
 *      @dcb_en: 1=enable delivery of Data Center Bridging messages.
 *
 *      Enables/disables a virtual interface.  Note that setting DCB Enable
 *      only makes sense when enabling a Virtual Interface ...
 */
int t4_enable_vi_params(struct adapter *adap, unsigned int mbox,
                        unsigned int viid, bool rx_en, bool tx_en, bool dcb_en)
{
        struct fw_vi_enable_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_ENABLE_CMD) |
                                   FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
                                   FW_VI_ENABLE_CMD_VIID_V(viid));
        c.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_IEN_V(rx_en) |
                                     FW_VI_ENABLE_CMD_EEN_V(tx_en) |
                                     FW_VI_ENABLE_CMD_DCB_INFO_V(dcb_en) |
                                     FW_LEN16(c));
        return t4_wr_mbox_ns(adap, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_enable_vi - enable/disable a virtual interface
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @viid: the VI id
 *      @rx_en: 1=enable Rx, 0=disable Rx
 *      @tx_en: 1=enable Tx, 0=disable Tx
 *
 *      Enables/disables a virtual interface.
 */
int t4_enable_vi(struct adapter *adap, unsigned int mbox, unsigned int viid,
                 bool rx_en, bool tx_en)
{
        return t4_enable_vi_params(adap, mbox, viid, rx_en, tx_en, 0);
}

/**
 *      t4_enable_pi_params - enable/disable a Port's Virtual Interface
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @pi: the Port Information structure
 *      @rx_en: 1=enable Rx, 0=disable Rx
 *      @tx_en: 1=enable Tx, 0=disable Tx
 *      @dcb_en: 1=enable delivery of Data Center Bridging messages.
 *
 *      Enables/disables a Port's Virtual Interface.  Note that setting DCB
 *      Enable only makes sense when enabling a Virtual Interface ...
 *      If the Virtual Interface enable/disable operation is successful,
 *      we notify the OS-specific code of a potential Link Status change
 *      via the OS Contract API t4_os_link_changed().
 */
int t4_enable_pi_params(struct adapter *adap, unsigned int mbox,
                        struct port_info *pi,
                        bool rx_en, bool tx_en, bool dcb_en)
{
        int ret = t4_enable_vi_params(adap, mbox, pi->viid,
                                      rx_en, tx_en, dcb_en);
        if (ret)
                return ret;
        t4_os_link_changed(adap, pi->port_id,
                           rx_en && tx_en && pi->link_cfg.link_ok);
        return 0;
}

/**
 *      t4_identify_port - identify a VI's port by blinking its LED
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @viid: the VI id
 *      @nblinks: how many times to blink LED at 2.5 Hz
 *
 *      Identifies a VI's port by blinking its LED.
 */
int t4_identify_port(struct adapter *adap, unsigned int mbox, unsigned int viid,
                     unsigned int nblinks)
{
        struct fw_vi_enable_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_viid = cpu_to_be32(FW_CMD_OP_V(FW_VI_ENABLE_CMD) |
                                   FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
                                   FW_VI_ENABLE_CMD_VIID_V(viid));
        c.ien_to_len16 = cpu_to_be32(FW_VI_ENABLE_CMD_LED_F | FW_LEN16(c));
        c.blinkdur = cpu_to_be16(nblinks);
        return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_iq_stop - stop an ingress queue and its FLs
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @pf: the PF owning the queues
 *      @vf: the VF owning the queues
 *      @iqtype: the ingress queue type (FW_IQ_TYPE_FL_INT_CAP, etc.)
 *      @iqid: ingress queue id
 *      @fl0id: FL0 queue id or 0xffff if no attached FL0
 *      @fl1id: FL1 queue id or 0xffff if no attached FL1
 *
 *      Stops an ingress queue and its associated FLs, if any.  This causes
 *      any current or future data/messages destined for these queues to be
 *      tossed.
 */
int t4_iq_stop(struct adapter *adap, unsigned int mbox, unsigned int pf,
               unsigned int vf, unsigned int iqtype, unsigned int iqid,
               unsigned int fl0id, unsigned int fl1id)
{
        struct fw_iq_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_IQ_CMD) | FW_CMD_REQUEST_F |
                                  FW_CMD_EXEC_F | FW_IQ_CMD_PFN_V(pf) |
                                  FW_IQ_CMD_VFN_V(vf));
        c.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_IQSTOP_F | FW_LEN16(c));
        c.type_to_iqandstindex = cpu_to_be32(FW_IQ_CMD_TYPE_V(iqtype));
        c.iqid = cpu_to_be16(iqid);
        c.fl0id = cpu_to_be16(fl0id);
        c.fl1id = cpu_to_be16(fl1id);
        return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_iq_free - free an ingress queue and its FLs
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @pf: the PF owning the queues
 *      @vf: the VF owning the queues
 *      @iqtype: the ingress queue type
 *      @iqid: ingress queue id
 *      @fl0id: FL0 queue id or 0xffff if no attached FL0
 *      @fl1id: FL1 queue id or 0xffff if no attached FL1
 *
 *      Frees an ingress queue and its associated FLs, if any.
 */
int t4_iq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
               unsigned int vf, unsigned int iqtype, unsigned int iqid,
               unsigned int fl0id, unsigned int fl1id)
{
        struct fw_iq_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_IQ_CMD) | FW_CMD_REQUEST_F |
                                  FW_CMD_EXEC_F | FW_IQ_CMD_PFN_V(pf) |
                                  FW_IQ_CMD_VFN_V(vf));
        c.alloc_to_len16 = cpu_to_be32(FW_IQ_CMD_FREE_F | FW_LEN16(c));
        c.type_to_iqandstindex = cpu_to_be32(FW_IQ_CMD_TYPE_V(iqtype));
        c.iqid = cpu_to_be16(iqid);
        c.fl0id = cpu_to_be16(fl0id);
        c.fl1id = cpu_to_be16(fl1id);
        return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_eth_eq_free - free an Ethernet egress queue
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @pf: the PF owning the queue
 *      @vf: the VF owning the queue
 *      @eqid: egress queue id
 *
 *      Frees an Ethernet egress queue.
 */
int t4_eth_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
                   unsigned int vf, unsigned int eqid)
{
        struct fw_eq_eth_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_EQ_ETH_CMD) |
                                  FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
                                  FW_EQ_ETH_CMD_PFN_V(pf) |
                                  FW_EQ_ETH_CMD_VFN_V(vf));
        c.alloc_to_len16 = cpu_to_be32(FW_EQ_ETH_CMD_FREE_F | FW_LEN16(c));
        c.eqid_pkd = cpu_to_be32(FW_EQ_ETH_CMD_EQID_V(eqid));
        return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_ctrl_eq_free - free a control egress queue
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @pf: the PF owning the queue
 *      @vf: the VF owning the queue
 *      @eqid: egress queue id
 *
 *      Frees a control egress queue.
 */
int t4_ctrl_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
                    unsigned int vf, unsigned int eqid)
{
        struct fw_eq_ctrl_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_EQ_CTRL_CMD) |
                                  FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
                                  FW_EQ_CTRL_CMD_PFN_V(pf) |
                                  FW_EQ_CTRL_CMD_VFN_V(vf));
        c.alloc_to_len16 = cpu_to_be32(FW_EQ_CTRL_CMD_FREE_F | FW_LEN16(c));
        c.cmpliqid_eqid = cpu_to_be32(FW_EQ_CTRL_CMD_EQID_V(eqid));
        return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_ofld_eq_free - free an offload egress queue
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @pf: the PF owning the queue
 *      @vf: the VF owning the queue
 *      @eqid: egress queue id
 *
 *      Frees a control egress queue.
 */
int t4_ofld_eq_free(struct adapter *adap, unsigned int mbox, unsigned int pf,
                    unsigned int vf, unsigned int eqid)
{
        struct fw_eq_ofld_cmd c;

        memset(&c, 0, sizeof(c));
        c.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_EQ_OFLD_CMD) |
                                  FW_CMD_REQUEST_F | FW_CMD_EXEC_F |
                                  FW_EQ_OFLD_CMD_PFN_V(pf) |
                                  FW_EQ_OFLD_CMD_VFN_V(vf));
        c.alloc_to_len16 = cpu_to_be32(FW_EQ_OFLD_CMD_FREE_F | FW_LEN16(c));
        c.eqid_pkd = cpu_to_be32(FW_EQ_OFLD_CMD_EQID_V(eqid));
        return t4_wr_mbox(adap, mbox, &c, sizeof(c), NULL);
}

/**
 *      t4_link_down_rc_str - return a string for a Link Down Reason Code
 *      @link_down_rc: Link Down Reason Code
 *
 *      Returns a string representation of the Link Down Reason Code.
 */
static const char *t4_link_down_rc_str(unsigned char link_down_rc)
{
        static const char * const reason[] = {
                "Link Down",
                "Remote Fault",
                "Auto-negotiation Failure",
                "Reserved",
                "Insufficient Airflow",
                "Unable To Determine Reason",
                "No RX Signal Detected",
                "Reserved",
        };

        if (link_down_rc >= ARRAY_SIZE(reason))
                return "Bad Reason Code";

        return reason[link_down_rc];
}

/* Return the highest speed set in the port capabilities, in Mb/s. */
static unsigned int fwcap_to_speed(fw_port_cap32_t caps)
{
        #define TEST_SPEED_RETURN(__caps_speed, __speed) \
                do { \
                        if (caps & FW_PORT_CAP32_SPEED_##__caps_speed) \
                                return __speed; \
                } while (0)

        TEST_SPEED_RETURN(400G, 400000);
        TEST_SPEED_RETURN(200G, 200000);
        TEST_SPEED_RETURN(100G, 100000);
        TEST_SPEED_RETURN(50G,   50000);
        TEST_SPEED_RETURN(40G,   40000);
        TEST_SPEED_RETURN(25G,   25000);
        TEST_SPEED_RETURN(10G,   10000);
        TEST_SPEED_RETURN(1G,     1000);
        TEST_SPEED_RETURN(100M,    100);

        #undef TEST_SPEED_RETURN

        return 0;
}

/**
 *      fwcap_to_fwspeed - return highest speed in Port Capabilities
 *      @acaps: advertised Port Capabilities
 *
 *      Get the highest speed for the port from the advertised Port
 *      Capabilities.  It will be either the highest speed from the list of
 *      speeds or whatever user has set using ethtool.
 */
static fw_port_cap32_t fwcap_to_fwspeed(fw_port_cap32_t acaps)
{
        #define TEST_SPEED_RETURN(__caps_speed) \
                do { \
                        if (acaps & FW_PORT_CAP32_SPEED_##__caps_speed) \
                                return FW_PORT_CAP32_SPEED_##__caps_speed; \
                } while (0)

        TEST_SPEED_RETURN(400G);
        TEST_SPEED_RETURN(200G);
        TEST_SPEED_RETURN(100G);
        TEST_SPEED_RETURN(50G);
        TEST_SPEED_RETURN(40G);
        TEST_SPEED_RETURN(25G);
        TEST_SPEED_RETURN(10G);
        TEST_SPEED_RETURN(1G);
        TEST_SPEED_RETURN(100M);

        #undef TEST_SPEED_RETURN

        return 0;
}

/**
 *      lstatus_to_fwcap - translate old lstatus to 32-bit Port Capabilities
 *      @lstatus: old FW_PORT_ACTION_GET_PORT_INFO lstatus value
 *
 *      Translates old FW_PORT_ACTION_GET_PORT_INFO lstatus field into new
 *      32-bit Port Capabilities value.
 */
static fw_port_cap32_t lstatus_to_fwcap(u32 lstatus)
{
        fw_port_cap32_t linkattr = 0;

        /* Unfortunately the format of the Link Status in the old
         * 16-bit Port Information message isn't the same as the
         * 16-bit Port Capabilities bitfield used everywhere else ...
         */
        if (lstatus & FW_PORT_CMD_RXPAUSE_F)
                linkattr |= FW_PORT_CAP32_FC_RX;
        if (lstatus & FW_PORT_CMD_TXPAUSE_F)
                linkattr |= FW_PORT_CAP32_FC_TX;
        if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100M))
                linkattr |= FW_PORT_CAP32_SPEED_100M;
        if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_1G))
                linkattr |= FW_PORT_CAP32_SPEED_1G;
        if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_10G))
                linkattr |= FW_PORT_CAP32_SPEED_10G;
        if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_25G))
                linkattr |= FW_PORT_CAP32_SPEED_25G;
        if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_40G))
                linkattr |= FW_PORT_CAP32_SPEED_40G;
        if (lstatus & FW_PORT_CMD_LSPEED_V(FW_PORT_CAP_SPEED_100G))
                linkattr |= FW_PORT_CAP32_SPEED_100G;

        return linkattr;
}

/**
 *      t4_handle_get_port_info - process a FW reply message
 *      @pi: the port info
 *      @rpl: start of the FW message
 *
 *      Processes a GET_PORT_INFO FW reply message.
 */
void t4_handle_get_port_info(struct port_info *pi, const __be64 *rpl)
{
        const struct fw_port_cmd *cmd = (const void *)rpl;
        fw_port_cap32_t pcaps, acaps, lpacaps, linkattr;
        struct link_config *lc = &pi->link_cfg;
        struct adapter *adapter = pi->adapter;
        unsigned int speed, fc, fec, adv_fc;
        enum fw_port_module_type mod_type;
        int action, link_ok, linkdnrc;
        enum fw_port_type port_type;

        /* Extract the various fields from the Port Information message.
         */
        action = FW_PORT_CMD_ACTION_G(be32_to_cpu(cmd->action_to_len16));
        switch (action) {
        case FW_PORT_ACTION_GET_PORT_INFO: {
                u32 lstatus = be32_to_cpu(cmd->u.info.lstatus_to_modtype);

                link_ok = (lstatus & FW_PORT_CMD_LSTATUS_F) != 0;
                linkdnrc = FW_PORT_CMD_LINKDNRC_G(lstatus);
                port_type = FW_PORT_CMD_PTYPE_G(lstatus);
                mod_type = FW_PORT_CMD_MODTYPE_G(lstatus);
                pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.pcap));
                acaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.acap));
                lpacaps = fwcaps16_to_caps32(be16_to_cpu(cmd->u.info.lpacap));
                linkattr = lstatus_to_fwcap(lstatus);
                break;
        }

        case FW_PORT_ACTION_GET_PORT_INFO32: {
                u32 lstatus32;

                lstatus32 = be32_to_cpu(cmd->u.info32.lstatus32_to_cbllen32);
                link_ok = (lstatus32 & FW_PORT_CMD_LSTATUS32_F) != 0;
                linkdnrc = FW_PORT_CMD_LINKDNRC32_G(lstatus32);
                port_type = FW_PORT_CMD_PORTTYPE32_G(lstatus32);
                mod_type = FW_PORT_CMD_MODTYPE32_G(lstatus32);
                pcaps = be32_to_cpu(cmd->u.info32.pcaps32);
                acaps = be32_to_cpu(cmd->u.info32.acaps32);
                lpacaps = be32_to_cpu(cmd->u.info32.lpacaps32);
                linkattr = be32_to_cpu(cmd->u.info32.linkattr32);
                break;
        }

        default:
                dev_err(adapter->pdev_dev, "Handle Port Information: Bad Command/Action %#x\n",
                        be32_to_cpu(cmd->action_to_len16));
                return;
        }

        fec = fwcap_to_cc_fec(acaps);
        adv_fc = fwcap_to_cc_pause(acaps);
        fc = fwcap_to_cc_pause(linkattr);
        speed = fwcap_to_speed(linkattr);

        /* Reset state for communicating new Transceiver Module status and
         * whether the OS-dependent layer wants us to redo the current
         * "sticky" L1 Configure Link Parameters.
         */
        lc->new_module = false;
        lc->redo_l1cfg = false;

        if (mod_type != pi->mod_type) {
                /* With the newer SFP28 and QSFP28 Transceiver Module Types,
                 * various fundamental Port Capabilities which used to be
                 * immutable can now change radically.  We can now have
                 * Speeds, Auto-Negotiation, Forward Error Correction, etc.
                 * all change based on what Transceiver Module is inserted.
                 * So we need to record the Physical "Port" Capabilities on
                 * every Transceiver Module change.
                 */
                lc->pcaps = pcaps;

                /* When a new Transceiver Module is inserted, the Firmware
                 * will examine its i2c EPROM to determine its type and
                 * general operating parameters including things like Forward
                 * Error Control, etc.  Various IEEE 802.3 standards dictate
                 * how to interpret these i2c values to determine default
                 * "sutomatic" settings.  We record these for future use when
                 * the user explicitly requests these standards-based values.
                 */
                lc->def_acaps = acaps;

                /* Some versions of the early T6 Firmware "cheated" when
                 * handling different Transceiver Modules by changing the
                 * underlaying Port Type reported to the Host Drivers.  As
                 * such we need to capture whatever Port Type the Firmware
                 * sends us and record it in case it's different from what we
                 * were told earlier.  Unfortunately, since Firmware is
                 * forever, we'll need to keep this code here forever, but in
                 * later T6 Firmware it should just be an assignment of the
                 * same value already recorded.
                 */
                pi->port_type = port_type;

                /* Record new Module Type information.
                 */
                pi->mod_type = mod_type;

                /* Let the OS-dependent layer know if we have a new
                 * Transceiver Module inserted.
                 */
                lc->new_module = t4_is_inserted_mod_type(mod_type);

                t4_os_portmod_changed(adapter, pi->port_id);
        }

        if (link_ok != lc->link_ok || speed != lc->speed ||
            fc != lc->fc || adv_fc != lc->advertised_fc ||
            fec != lc->fec) {
                /* something changed */
                if (!link_ok && lc->link_ok) {
                        lc->link_down_rc = linkdnrc;
                        dev_warn_ratelimited(adapter->pdev_dev,
                                             "Port %d link down, reason: %s\n",
                                             pi->tx_chan,
                                             t4_link_down_rc_str(linkdnrc));
                }
                lc->link_ok = link_ok;
                lc->speed = speed;
                lc->advertised_fc = adv_fc;
                lc->fc = fc;
                lc->fec = fec;

                lc->lpacaps = lpacaps;
                lc->acaps = acaps & ADVERT_MASK;

                /* If we're not physically capable of Auto-Negotiation, note
                 * this as Auto-Negotiation disabled.  Otherwise, we track
                 * what Auto-Negotiation settings we have.  Note parallel
                 * structure in t4_link_l1cfg_core() and init_link_config().
                 */
                if (!(lc->acaps & FW_PORT_CAP32_ANEG)) {
                        lc->autoneg = AUTONEG_DISABLE;
                } else if (lc->acaps & FW_PORT_CAP32_ANEG) {
                        lc->autoneg = AUTONEG_ENABLE;
                } else {
                        /* When Autoneg is disabled, user needs to set
                         * single speed.
                         * Similar to cxgb4_ethtool.c: set_link_ksettings
                         */
                        lc->acaps = 0;
                        lc->speed_caps = fwcap_to_fwspeed(acaps);
                        lc->autoneg = AUTONEG_DISABLE;
                }

                t4_os_link_changed(adapter, pi->port_id, link_ok);
        }

        /* If we have a new Transceiver Module and the OS-dependent code has
         * told us that it wants us to redo whatever "sticky" L1 Configuration
         * Link Parameters are set, do that now.
         */
        if (lc->new_module && lc->redo_l1cfg) {
                struct link_config old_lc;
                int ret;

                /* Save the current L1 Configuration and restore it if an
                 * error occurs.  We probably should fix the l1_cfg*()
                 * routines not to change the link_config when an error
                 * occurs ...
                 */
                old_lc = *lc;
                ret = t4_link_l1cfg_ns(adapter, adapter->mbox, pi->lport, lc);
                if (ret) {
                        *lc = old_lc;
                        dev_warn(adapter->pdev_dev,
                                 "Attempt to update new Transceiver Module settings failed\n");
                }
        }
        lc->new_module = false;
        lc->redo_l1cfg = false;
}

/**
 *      t4_update_port_info - retrieve and update port information if changed
 *      @pi: the port_info
 *
 *      We issue a Get Port Information Command to the Firmware and, if
 *      successful, we check to see if anything is different from what we
 *      last recorded and update things accordingly.
 */
int t4_update_port_info(struct port_info *pi)
{
        unsigned int fw_caps = pi->adapter->params.fw_caps_support;
        struct fw_port_cmd port_cmd;
        int ret;

        memset(&port_cmd, 0, sizeof(port_cmd));
        port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
                                            FW_CMD_REQUEST_F | FW_CMD_READ_F |
                                            FW_PORT_CMD_PORTID_V(pi->tx_chan));
        port_cmd.action_to_len16 = cpu_to_be32(
                FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
                                     ? FW_PORT_ACTION_GET_PORT_INFO
                                     : FW_PORT_ACTION_GET_PORT_INFO32) |
                FW_LEN16(port_cmd));
        ret = t4_wr_mbox(pi->adapter, pi->adapter->mbox,
                         &port_cmd, sizeof(port_cmd), &port_cmd);
        if (ret)
                return ret;

        t4_handle_get_port_info(pi, (__be64 *)&port_cmd);
        return 0;
}

/**
 *      t4_get_link_params - retrieve basic link parameters for given port
 *      @pi: the port
 *      @link_okp: value return pointer for link up/down
 *      @speedp: value return pointer for speed (Mb/s)
 *      @mtup: value return pointer for mtu
 *
 *      Retrieves basic link parameters for a port: link up/down, speed (Mb/s),
 *      and MTU for a specified port.  A negative error is returned on
 *      failure; 0 on success.
 */
int t4_get_link_params(struct port_info *pi, unsigned int *link_okp,
                       unsigned int *speedp, unsigned int *mtup)
{
        unsigned int fw_caps = pi->adapter->params.fw_caps_support;
        unsigned int action, link_ok, mtu;
        struct fw_port_cmd port_cmd;
        fw_port_cap32_t linkattr;
        int ret;

        memset(&port_cmd, 0, sizeof(port_cmd));
        port_cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
                                            FW_CMD_REQUEST_F | FW_CMD_READ_F |
                                            FW_PORT_CMD_PORTID_V(pi->tx_chan));
        action = (fw_caps == FW_CAPS16
                  ? FW_PORT_ACTION_GET_PORT_INFO
                  : FW_PORT_ACTION_GET_PORT_INFO32);
        port_cmd.action_to_len16 = cpu_to_be32(
                FW_PORT_CMD_ACTION_V(action) |
                FW_LEN16(port_cmd));
        ret = t4_wr_mbox(pi->adapter, pi->adapter->mbox,
                         &port_cmd, sizeof(port_cmd), &port_cmd);
        if (ret)
                return ret;

        if (action == FW_PORT_ACTION_GET_PORT_INFO) {
                u32 lstatus = be32_to_cpu(port_cmd.u.info.lstatus_to_modtype);

                link_ok = !!(lstatus & FW_PORT_CMD_LSTATUS_F);
                linkattr = lstatus_to_fwcap(lstatus);
                mtu = be16_to_cpu(port_cmd.u.info.mtu);
        } else {
                u32 lstatus32 =
                           be32_to_cpu(port_cmd.u.info32.lstatus32_to_cbllen32);

                link_ok = !!(lstatus32 & FW_PORT_CMD_LSTATUS32_F);
                linkattr = be32_to_cpu(port_cmd.u.info32.linkattr32);
                mtu = FW_PORT_CMD_MTU32_G(
                        be32_to_cpu(port_cmd.u.info32.auxlinfo32_mtu32));
        }

        if (link_okp)
                *link_okp = link_ok;
        if (speedp)
                *speedp = fwcap_to_speed(linkattr);
        if (mtup)
                *mtup = mtu;

        return 0;
}

/**
 *      t4_handle_fw_rpl - process a FW reply message
 *      @adap: the adapter
 *      @rpl: start of the FW message
 *
 *      Processes a FW message, such as link state change messages.
 */
int t4_handle_fw_rpl(struct adapter *adap, const __be64 *rpl)
{
        u8 opcode = *(const u8 *)rpl;

        /* This might be a port command ... this simplifies the following
         * conditionals ...  We can get away with pre-dereferencing
         * action_to_len16 because it's in the first 16 bytes and all messages
         * will be at least that long.
         */
        const struct fw_port_cmd *p = (const void *)rpl;
        unsigned int action =
                FW_PORT_CMD_ACTION_G(be32_to_cpu(p->action_to_len16));

        if (opcode == FW_PORT_CMD &&
            (action == FW_PORT_ACTION_GET_PORT_INFO ||
             action == FW_PORT_ACTION_GET_PORT_INFO32)) {
                int i;
                int chan = FW_PORT_CMD_PORTID_G(be32_to_cpu(p->op_to_portid));
                struct port_info *pi = NULL;

                for_each_port(adap, i) {
                        pi = adap2pinfo(adap, i);
                        if (pi->tx_chan == chan)
                                break;
                }

                t4_handle_get_port_info(pi, rpl);
        } else {
                dev_warn(adap->pdev_dev, "Unknown firmware reply %d\n",
                         opcode);
                return -EINVAL;
        }
        return 0;
}

static void get_pci_mode(struct adapter *adapter, struct pci_params *p)
{
        u16 val;

        if (pci_is_pcie(adapter->pdev)) {
                pcie_capability_read_word(adapter->pdev, PCI_EXP_LNKSTA, &val);
                p->speed = val & PCI_EXP_LNKSTA_CLS;
                p->width = (val & PCI_EXP_LNKSTA_NLW) >> 4;
        }
}

/**
 *      init_link_config - initialize a link's SW state
 *      @lc: pointer to structure holding the link state
 *      @pcaps: link Port Capabilities
 *      @acaps: link current Advertised Port Capabilities
 *
 *      Initializes the SW state maintained for each link, including the link's
 *      capabilities and default speed/flow-control/autonegotiation settings.
 */
static void init_link_config(struct link_config *lc, fw_port_cap32_t pcaps,
                             fw_port_cap32_t acaps)
{
        lc->pcaps = pcaps;
        lc->def_acaps = acaps;
        lc->lpacaps = 0;
        lc->speed_caps = 0;
        lc->speed = 0;
        lc->requested_fc = lc->fc = PAUSE_RX | PAUSE_TX;

        /* For Forward Error Control, we default to whatever the Firmware
         * tells us the Link is currently advertising.
         */
        lc->requested_fec = FEC_AUTO;
        lc->fec = fwcap_to_cc_fec(lc->def_acaps);

        /* If the Port is capable of Auto-Negtotiation, initialize it as
         * "enabled" and copy over all of the Physical Port Capabilities
         * to the Advertised Port Capabilities.  Otherwise mark it as
         * Auto-Negotiate disabled and select the highest supported speed
         * for the link.  Note parallel structure in t4_link_l1cfg_core()
         * and t4_handle_get_port_info().
         */
        if (lc->pcaps & FW_PORT_CAP32_ANEG) {
                lc->acaps = lc->pcaps & ADVERT_MASK;
                lc->autoneg = AUTONEG_ENABLE;
                lc->requested_fc |= PAUSE_AUTONEG;
        } else {
                lc->acaps = 0;
                lc->autoneg = AUTONEG_DISABLE;
                lc->speed_caps = fwcap_to_fwspeed(acaps);
        }
}

#define CIM_PF_NOACCESS 0xeeeeeeee

int t4_wait_dev_ready(void __iomem *regs)
{
        u32 whoami;

        whoami = readl(regs + PL_WHOAMI_A);
        if (whoami != 0xffffffff && whoami != CIM_PF_NOACCESS)
                return 0;

        msleep(500);
        whoami = readl(regs + PL_WHOAMI_A);
        return (whoami != 0xffffffff && whoami != CIM_PF_NOACCESS ? 0 : -EIO);
}

struct flash_desc {
        u32 vendor_and_model_id;
        u32 size_mb;
};

static int t4_get_flash_params(struct adapter *adap)
{
        /* Table for non-Numonix supported flash parts.  Numonix parts are left
         * to the preexisting code.  All flash parts have 64KB sectors.
         */
        static struct flash_desc supported_flash[] = {
                { 0x150201, 4 << 20 },       /* Spansion 4MB S25FL032P */
        };

        unsigned int part, manufacturer;
        unsigned int density, size = 0;
        u32 flashid = 0;
        int ret;

        /* Issue a Read ID Command to the Flash part.  We decode supported
         * Flash parts and their sizes from this.  There's a newer Query
         * Command which can retrieve detailed geometry information but many
         * Flash parts don't support it.
         */

        ret = sf1_write(adap, 1, 1, 0, SF_RD_ID);
        if (!ret)
                ret = sf1_read(adap, 3, 0, 1, &flashid);
        t4_write_reg(adap, SF_OP_A, 0);                    /* unlock SF */
        if (ret)
                return ret;

        /* Check to see if it's one of our non-standard supported Flash parts.
         */
        for (part = 0; part < ARRAY_SIZE(supported_flash); part++)
                if (supported_flash[part].vendor_and_model_id == flashid) {
                        adap->params.sf_size = supported_flash[part].size_mb;
                        adap->params.sf_nsec =
                                adap->params.sf_size / SF_SEC_SIZE;
                        goto found;
                }

        /* Decode Flash part size.  The code below looks repetitive with
         * common encodings, but that's not guaranteed in the JEDEC
         * specification for the Read JEDEC ID command.  The only thing that
         * we're guaranteed by the JEDEC specification is where the
         * Manufacturer ID is in the returned result.  After that each
         * Manufacturer ~could~ encode things completely differently.
         * Note, all Flash parts must have 64KB sectors.
         */
        manufacturer = flashid & 0xff;
        switch (manufacturer) {
        case 0x20: { /* Micron/Numonix */
                /* This Density -> Size decoding table is taken from Micron
                 * Data Sheets.
                 */
                density = (flashid >> 16) & 0xff;
                switch (density) {
                case 0x14: /* 1MB */
                        size = 1 << 20;
                        break;
                case 0x15: /* 2MB */
                        size = 1 << 21;
                        break;
                case 0x16: /* 4MB */
                        size = 1 << 22;
                        break;
                case 0x17: /* 8MB */
                        size = 1 << 23;
                        break;
                case 0x18: /* 16MB */
                        size = 1 << 24;
                        break;
                case 0x19: /* 32MB */
                        size = 1 << 25;
                        break;
                case 0x20: /* 64MB */
                        size = 1 << 26;
                        break;
                case 0x21: /* 128MB */
                        size = 1 << 27;
                        break;
                case 0x22: /* 256MB */
                        size = 1 << 28;
                        break;
                }
                break;
        }
        case 0x9d: { /* ISSI -- Integrated Silicon Solution, Inc. */
                /* This Density -> Size decoding table is taken from ISSI
                 * Data Sheets.
                 */
                density = (flashid >> 16) & 0xff;
                switch (density) {
                case 0x16: /* 32 MB */
                        size = 1 << 25;
                        break;
                case 0x17: /* 64MB */
                        size = 1 << 26;
                        break;
                }
                break;
        }
        case 0xc2: { /* Macronix */
                /* This Density -> Size decoding table is taken from Macronix
                 * Data Sheets.
                 */
                density = (flashid >> 16) & 0xff;
                switch (density) {
                case 0x17: /* 8MB */
                        size = 1 << 23;
                        break;
                case 0x18: /* 16MB */
                        size = 1 << 24;
                        break;
                }
                break;
        }
        case 0xef: { /* Winbond */
                /* This Density -> Size decoding table is taken from Winbond
                 * Data Sheets.
                 */
                density = (flashid >> 16) & 0xff;
                switch (density) {
                case 0x17: /* 8MB */
                        size = 1 << 23;
                        break;
                case 0x18: /* 16MB */
                        size = 1 << 24;
                        break;
                }
                break;
        }
        }

        /* If we didn't recognize the FLASH part, that's no real issue: the
         * Hardware/Software contract says that Hardware will _*ALWAYS*_
         * use a FLASH part which is at least 4MB in size and has 64KB
         * sectors.  The unrecognized FLASH part is likely to be much larger
         * than 4MB, but that's all we really need.
         */
        if (size == 0) {
                dev_warn(adap->pdev_dev, "Unknown Flash Part, ID = %#x, assuming 4MB\n",
                         flashid);
                size = 1 << 22;
        }

        /* Store decoded Flash size and fall through into vetting code. */
        adap->params.sf_size = size;
        adap->params.sf_nsec = size / SF_SEC_SIZE;

found:
        if (adap->params.sf_size < FLASH_MIN_SIZE)
                dev_warn(adap->pdev_dev, "WARNING: Flash Part ID %#x, size %#x < %#x\n",
                         flashid, adap->params.sf_size, FLASH_MIN_SIZE);
        return 0;
}

/**
 *      t4_prep_adapter - prepare SW and HW for operation
 *      @adapter: the adapter
 *
 *      Initialize adapter SW state for the various HW modules, set initial
 *      values for some adapter tunables, take PHYs out of reset, and
 *      initialize the MDIO interface.
 */
int t4_prep_adapter(struct adapter *adapter)
{
        int ret, ver;
        uint16_t device_id;
        u32 pl_rev;

        get_pci_mode(adapter, &adapter->params.pci);
        pl_rev = REV_G(t4_read_reg(adapter, PL_REV_A));

        ret = t4_get_flash_params(adapter);
        if (ret < 0) {
                dev_err(adapter->pdev_dev, "error %d identifying flash\n", ret);
                return ret;
        }

        /* Retrieve adapter's device ID
         */
        pci_read_config_word(adapter->pdev, PCI_DEVICE_ID, &device_id);
        ver = device_id >> 12;
        adapter->params.chip = 0;
        switch (ver) {
        case CHELSIO_T4:
                adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T4, pl_rev);
                adapter->params.arch.sge_fl_db = DBPRIO_F;
                adapter->params.arch.mps_tcam_size =
                                 NUM_MPS_CLS_SRAM_L_INSTANCES;
                adapter->params.arch.mps_rplc_size = 128;
                adapter->params.arch.nchan = NCHAN;
                adapter->params.arch.pm_stats_cnt = PM_NSTATS;
                adapter->params.arch.vfcount = 128;
                /* Congestion map is for 4 channels so that
                 * MPS can have 4 priority per port.
                 */
                adapter->params.arch.cng_ch_bits_log = 2;
                break;
        case CHELSIO_T5:
                adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T5, pl_rev);
                adapter->params.arch.sge_fl_db = DBPRIO_F | DBTYPE_F;
                adapter->params.arch.mps_tcam_size =
                                 NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
                adapter->params.arch.mps_rplc_size = 128;
                adapter->params.arch.nchan = NCHAN;
                adapter->params.arch.pm_stats_cnt = PM_NSTATS;
                adapter->params.arch.vfcount = 128;
                adapter->params.arch.cng_ch_bits_log = 2;
                break;
        case CHELSIO_T6:
                adapter->params.chip |= CHELSIO_CHIP_CODE(CHELSIO_T6, pl_rev);
                adapter->params.arch.sge_fl_db = 0;
                adapter->params.arch.mps_tcam_size =
                                 NUM_MPS_T5_CLS_SRAM_L_INSTANCES;
                adapter->params.arch.mps_rplc_size = 256;
                adapter->params.arch.nchan = 2;
                adapter->params.arch.pm_stats_cnt = T6_PM_NSTATS;
                adapter->params.arch.vfcount = 256;
                /* Congestion map will be for 2 channels so that
                 * MPS can have 8 priority per port.
                 */
                adapter->params.arch.cng_ch_bits_log = 3;
                break;
        default:
                dev_err(adapter->pdev_dev, "Device %d is not supported\n",
                        device_id);
                return -EINVAL;
        }

        adapter->params.cim_la_size = CIMLA_SIZE;
        init_cong_ctrl(adapter->params.a_wnd, adapter->params.b_wnd);

        /*
         * Default port for debugging in case we can't reach FW.
         */
        adapter->params.nports = 1;
        adapter->params.portvec = 1;
        adapter->params.vpd.cclk = 50000;

        /* Set PCIe completion timeout to 4 seconds. */
        pcie_capability_clear_and_set_word(adapter->pdev, PCI_EXP_DEVCTL2,
                                           PCI_EXP_DEVCTL2_COMP_TIMEOUT, 0xd);
        return 0;
}

/**
 *      t4_shutdown_adapter - shut down adapter, host & wire
 *      @adapter: the adapter
 *
 *      Perform an emergency shutdown of the adapter and stop it from
 *      continuing any further communication on the ports or DMA to the
 *      host.  This is typically used when the adapter and/or firmware
 *      have crashed and we want to prevent any further accidental
 *      communication with the rest of the world.  This will also force
 *      the port Link Status to go down -- if register writes work --
 *      which should help our peers figure out that we're down.
 */
int t4_shutdown_adapter(struct adapter *adapter)
{
        int port;

        t4_intr_disable(adapter);
        t4_write_reg(adapter, DBG_GPIO_EN_A, 0);
        for_each_port(adapter, port) {
                u32 a_port_cfg = is_t4(adapter->params.chip) ?
                                       PORT_REG(port, XGMAC_PORT_CFG_A) :
                                       T5_PORT_REG(port, MAC_PORT_CFG_A);

                t4_write_reg(adapter, a_port_cfg,
                             t4_read_reg(adapter, a_port_cfg)
                             & ~SIGNAL_DET_V(1));
        }
        t4_set_reg_field(adapter, SGE_CONTROL_A, GLOBALENABLE_F, 0);

        return 0;
}

/**
 *      t4_bar2_sge_qregs - return BAR2 SGE Queue register information
 *      @adapter: the adapter
 *      @qid: the Queue ID
 *      @qtype: the Ingress or Egress type for @qid
 *      @user: true if this request is for a user mode queue
 *      @pbar2_qoffset: BAR2 Queue Offset
 *      @pbar2_qid: BAR2 Queue ID or 0 for Queue ID inferred SGE Queues
 *
 *      Returns the BAR2 SGE Queue Registers information associated with the
 *      indicated Absolute Queue ID.  These are passed back in return value
 *      pointers.  @qtype should be T4_BAR2_QTYPE_EGRESS for Egress Queue
 *      and T4_BAR2_QTYPE_INGRESS for Ingress Queues.
 *
 *      This may return an error which indicates that BAR2 SGE Queue
 *      registers aren't available.  If an error is not returned, then the
 *      following values are returned:
 *
 *        *@pbar2_qoffset: the BAR2 Offset of the @qid Registers
 *        *@pbar2_qid: the BAR2 SGE Queue ID or 0 of @qid
 *
 *      If the returned BAR2 Queue ID is 0, then BAR2 SGE registers which
 *      require the "Inferred Queue ID" ability may be used.  E.g. the
 *      Write Combining Doorbell Buffer. If the BAR2 Queue ID is not 0,
 *      then these "Inferred Queue ID" register may not be used.
 */
int t4_bar2_sge_qregs(struct adapter *adapter,
                      unsigned int qid,
                      enum t4_bar2_qtype qtype,
                      int user,
                      u64 *pbar2_qoffset,
                      unsigned int *pbar2_qid)
{
        unsigned int page_shift, page_size, qpp_shift, qpp_mask;
        u64 bar2_page_offset, bar2_qoffset;
        unsigned int bar2_qid, bar2_qid_offset, bar2_qinferred;

        /* T4 doesn't support BAR2 SGE Queue registers for kernel mode queues */
        if (!user && is_t4(adapter->params.chip))
                return -EINVAL;

        /* Get our SGE Page Size parameters.
         */
        page_shift = adapter->params.sge.hps + 10;
        page_size = 1 << page_shift;

        /* Get the right Queues per Page parameters for our Queue.
         */
        qpp_shift = (qtype == T4_BAR2_QTYPE_EGRESS
                     ? adapter->params.sge.eq_qpp
                     : adapter->params.sge.iq_qpp);
        qpp_mask = (1 << qpp_shift) - 1;

        /*  Calculate the basics of the BAR2 SGE Queue register area:
         *  o The BAR2 page the Queue registers will be in.
         *  o The BAR2 Queue ID.
         *  o The BAR2 Queue ID Offset into the BAR2 page.
         */
        bar2_page_offset = ((u64)(qid >> qpp_shift) << page_shift);
        bar2_qid = qid & qpp_mask;
        bar2_qid_offset = bar2_qid * SGE_UDB_SIZE;

        /* If the BAR2 Queue ID Offset is less than the Page Size, then the
         * hardware will infer the Absolute Queue ID simply from the writes to
         * the BAR2 Queue ID Offset within the BAR2 Page (and we need to use a
         * BAR2 Queue ID of 0 for those writes).  Otherwise, we'll simply
         * write to the first BAR2 SGE Queue Area within the BAR2 Page with
         * the BAR2 Queue ID and the hardware will infer the Absolute Queue ID
         * from the BAR2 Page and BAR2 Queue ID.
         *
         * One important censequence of this is that some BAR2 SGE registers
         * have a "Queue ID" field and we can write the BAR2 SGE Queue ID
         * there.  But other registers synthesize the SGE Queue ID purely
         * from the writes to the registers -- the Write Combined Doorbell
         * Buffer is a good example.  These BAR2 SGE Registers are only
         * available for those BAR2 SGE Register areas where the SGE Absolute
         * Queue ID can be inferred from simple writes.
         */
        bar2_qoffset = bar2_page_offset;
        bar2_qinferred = (bar2_qid_offset < page_size);
        if (bar2_qinferred) {
                bar2_qoffset += bar2_qid_offset;
                bar2_qid = 0;
        }

        *pbar2_qoffset = bar2_qoffset;
        *pbar2_qid = bar2_qid;
        return 0;
}

/**
 *      t4_init_devlog_params - initialize adapter->params.devlog
 *      @adap: the adapter
 *
 *      Initialize various fields of the adapter's Firmware Device Log
 *      Parameters structure.
 */
int t4_init_devlog_params(struct adapter *adap)
{
        struct devlog_params *dparams = &adap->params.devlog;
        u32 pf_dparams;
        unsigned int devlog_meminfo;
        struct fw_devlog_cmd devlog_cmd;
        int ret;

        /* If we're dealing with newer firmware, the Device Log Parameters
         * are stored in a designated register which allows us to access the
         * Device Log even if we can't talk to the firmware.
         */
        pf_dparams =
                t4_read_reg(adap, PCIE_FW_REG(PCIE_FW_PF_A, PCIE_FW_PF_DEVLOG));
        if (pf_dparams) {
                unsigned int nentries, nentries128;

                dparams->memtype = PCIE_FW_PF_DEVLOG_MEMTYPE_G(pf_dparams);
                dparams->start = PCIE_FW_PF_DEVLOG_ADDR16_G(pf_dparams) << 4;

                nentries128 = PCIE_FW_PF_DEVLOG_NENTRIES128_G(pf_dparams);
                nentries = (nentries128 + 1) * 128;
                dparams->size = nentries * sizeof(struct fw_devlog_e);

                return 0;
        }

        /* Otherwise, ask the firmware for its Device Log Parameters.
         */
        memset(&devlog_cmd, 0, sizeof(devlog_cmd));
        devlog_cmd.op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_DEVLOG_CMD) |
                                             FW_CMD_REQUEST_F | FW_CMD_READ_F);
        devlog_cmd.retval_len16 = cpu_to_be32(FW_LEN16(devlog_cmd));
        ret = t4_wr_mbox(adap, adap->mbox, &devlog_cmd, sizeof(devlog_cmd),
                         &devlog_cmd);
        if (ret)
                return ret;

        devlog_meminfo =
                be32_to_cpu(devlog_cmd.memtype_devlog_memaddr16_devlog);
        dparams->memtype = FW_DEVLOG_CMD_MEMTYPE_DEVLOG_G(devlog_meminfo);
        dparams->start = FW_DEVLOG_CMD_MEMADDR16_DEVLOG_G(devlog_meminfo) << 4;
        dparams->size = be32_to_cpu(devlog_cmd.memsize_devlog);

        return 0;
}

/**
 *      t4_init_sge_params - initialize adap->params.sge
 *      @adapter: the adapter
 *
 *      Initialize various fields of the adapter's SGE Parameters structure.
 */
int t4_init_sge_params(struct adapter *adapter)
{
        struct sge_params *sge_params = &adapter->params.sge;
        u32 hps, qpp;
        unsigned int s_hps, s_qpp;

        /* Extract the SGE Page Size for our PF.
         */
        hps = t4_read_reg(adapter, SGE_HOST_PAGE_SIZE_A);
        s_hps = (HOSTPAGESIZEPF0_S +
                 (HOSTPAGESIZEPF1_S - HOSTPAGESIZEPF0_S) * adapter->pf);
        sge_params->hps = ((hps >> s_hps) & HOSTPAGESIZEPF0_M);

        /* Extract the SGE Egress and Ingess Queues Per Page for our PF.
         */
        s_qpp = (QUEUESPERPAGEPF0_S +
                (QUEUESPERPAGEPF1_S - QUEUESPERPAGEPF0_S) * adapter->pf);
        qpp = t4_read_reg(adapter, SGE_EGRESS_QUEUES_PER_PAGE_PF_A);
        sge_params->eq_qpp = ((qpp >> s_qpp) & QUEUESPERPAGEPF0_M);
        qpp = t4_read_reg(adapter, SGE_INGRESS_QUEUES_PER_PAGE_PF_A);
        sge_params->iq_qpp = ((qpp >> s_qpp) & QUEUESPERPAGEPF0_M);

        return 0;
}

/**
 *      t4_init_tp_params - initialize adap->params.tp
 *      @adap: the adapter
 *      @sleep_ok: if true we may sleep while awaiting command completion
 *
 *      Initialize various fields of the adapter's TP Parameters structure.
 */
int t4_init_tp_params(struct adapter *adap, bool sleep_ok)
{
        u32 param, val, v;
        int chan, ret;


        v = t4_read_reg(adap, TP_TIMER_RESOLUTION_A);
        adap->params.tp.tre = TIMERRESOLUTION_G(v);
        adap->params.tp.dack_re = DELAYEDACKRESOLUTION_G(v);

        /* MODQ_REQ_MAP defaults to setting queues 0-3 to chan 0-3 */
        for (chan = 0; chan < NCHAN; chan++)
                adap->params.tp.tx_modq[chan] = chan;

        /* Cache the adapter's Compressed Filter Mode/Mask and global Ingress
         * Configuration.
         */
        param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_DEV) |
                 FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_DEV_FILTER) |
                 FW_PARAMS_PARAM_Y_V(FW_PARAM_DEV_FILTER_MODE_MASK));

        /* Read current value */
        ret = t4_query_params(adap, adap->mbox, adap->pf, 0, 1,
                              &param, &val);
        if (ret == 0) {
                dev_info(adap->pdev_dev,
                         "Current filter mode/mask 0x%x:0x%x\n",
                         FW_PARAMS_PARAM_FILTER_MODE_G(val),
                         FW_PARAMS_PARAM_FILTER_MASK_G(val));
                adap->params.tp.vlan_pri_map =
                        FW_PARAMS_PARAM_FILTER_MODE_G(val);
                adap->params.tp.filter_mask =
                        FW_PARAMS_PARAM_FILTER_MASK_G(val);
        } else {
                dev_info(adap->pdev_dev,
                         "Failed to read filter mode/mask via fw api, using indirect-reg-read\n");

                /* Incase of older-fw (which doesn't expose the api
                 * FW_PARAM_DEV_FILTER_MODE_MASK) and newer-driver (which uses
                 * the fw api) combination, fall-back to older method of reading
                 * the filter mode from indirect-register
                 */
                t4_tp_pio_read(adap, &adap->params.tp.vlan_pri_map, 1,
                               TP_VLAN_PRI_MAP_A, sleep_ok);

                /* With the older-fw and newer-driver combination we might run
                 * into an issue when user wants to use hash filter region but
                 * the filter_mask is zero, in this case filter_mask validation
                 * is tough. To avoid that we set the filter_mask same as filter
                 * mode, which will behave exactly as the older way of ignoring
                 * the filter mask validation.
                 */
                adap->params.tp.filter_mask = adap->params.tp.vlan_pri_map;
        }

        t4_tp_pio_read(adap, &adap->params.tp.ingress_config, 1,
                       TP_INGRESS_CONFIG_A, sleep_ok);

        /* For T6, cache the adapter's compressed error vector
         * and passing outer header info for encapsulated packets.
         */
        if (CHELSIO_CHIP_VERSION(adap->params.chip) > CHELSIO_T5) {
                v = t4_read_reg(adap, TP_OUT_CONFIG_A);
                adap->params.tp.rx_pkt_encap = (v & CRXPKTENC_F) ? 1 : 0;
        }

        /* Now that we have TP_VLAN_PRI_MAP cached, we can calculate the field
         * shift positions of several elements of the Compressed Filter Tuple
         * for this adapter which we need frequently ...
         */
        adap->params.tp.fcoe_shift = t4_filter_field_shift(adap, FCOE_F);
        adap->params.tp.port_shift = t4_filter_field_shift(adap, PORT_F);
        adap->params.tp.vnic_shift = t4_filter_field_shift(adap, VNIC_ID_F);
        adap->params.tp.vlan_shift = t4_filter_field_shift(adap, VLAN_F);
        adap->params.tp.tos_shift = t4_filter_field_shift(adap, TOS_F);
        adap->params.tp.protocol_shift = t4_filter_field_shift(adap,
                                                               PROTOCOL_F);
        adap->params.tp.ethertype_shift = t4_filter_field_shift(adap,
                                                                ETHERTYPE_F);
        adap->params.tp.macmatch_shift = t4_filter_field_shift(adap,
                                                               MACMATCH_F);
        adap->params.tp.matchtype_shift = t4_filter_field_shift(adap,
                                                                MPSHITTYPE_F);
        adap->params.tp.frag_shift = t4_filter_field_shift(adap,
                                                           FRAGMENTATION_F);

        /* If TP_INGRESS_CONFIG.VNID == 0, then TP_VLAN_PRI_MAP.VNIC_ID
         * represents the presence of an Outer VLAN instead of a VNIC ID.
         */
        if ((adap->params.tp.ingress_config & VNIC_F) == 0)
                adap->params.tp.vnic_shift = -1;

        v = t4_read_reg(adap, LE_3_DB_HASH_MASK_GEN_IPV4_T6_A);
        adap->params.tp.hash_filter_mask = v;
        v = t4_read_reg(adap, LE_4_DB_HASH_MASK_GEN_IPV4_T6_A);
        adap->params.tp.hash_filter_mask |= ((u64)v << 32);
        return 0;
}

/**
 *      t4_filter_field_shift - calculate filter field shift
 *      @adap: the adapter
 *      @filter_sel: the desired field (from TP_VLAN_PRI_MAP bits)
 *
 *      Return the shift position of a filter field within the Compressed
 *      Filter Tuple.  The filter field is specified via its selection bit
 *      within TP_VLAN_PRI_MAL (filter mode).  E.g. F_VLAN.
 */
int t4_filter_field_shift(const struct adapter *adap, int filter_sel)
{
        unsigned int filter_mode = adap->params.tp.vlan_pri_map;
        unsigned int sel;
        int field_shift;

        if ((filter_mode & filter_sel) == 0)
                return -1;

        for (sel = 1, field_shift = 0; sel < filter_sel; sel <<= 1) {
                switch (filter_mode & sel) {
                case FCOE_F:
                        field_shift += FT_FCOE_W;
                        break;
                case PORT_F:
                        field_shift += FT_PORT_W;
                        break;
                case VNIC_ID_F:
                        field_shift += FT_VNIC_ID_W;
                        break;
                case VLAN_F:
                        field_shift += FT_VLAN_W;
                        break;
                case TOS_F:
                        field_shift += FT_TOS_W;
                        break;
                case PROTOCOL_F:
                        field_shift += FT_PROTOCOL_W;
                        break;
                case ETHERTYPE_F:
                        field_shift += FT_ETHERTYPE_W;
                        break;
                case MACMATCH_F:
                        field_shift += FT_MACMATCH_W;
                        break;
                case MPSHITTYPE_F:
                        field_shift += FT_MPSHITTYPE_W;
                        break;
                case FRAGMENTATION_F:
                        field_shift += FT_FRAGMENTATION_W;
                        break;
                }
        }
        return field_shift;
}

int t4_init_rss_mode(struct adapter *adap, int mbox)
{
        int i, ret;
        struct fw_rss_vi_config_cmd rvc;

        memset(&rvc, 0, sizeof(rvc));

        for_each_port(adap, i) {
                struct port_info *p = adap2pinfo(adap, i);

                rvc.op_to_viid =
                        cpu_to_be32(FW_CMD_OP_V(FW_RSS_VI_CONFIG_CMD) |
                                    FW_CMD_REQUEST_F | FW_CMD_READ_F |
                                    FW_RSS_VI_CONFIG_CMD_VIID_V(p->viid));
                rvc.retval_len16 = cpu_to_be32(FW_LEN16(rvc));
                ret = t4_wr_mbox(adap, mbox, &rvc, sizeof(rvc), &rvc);
                if (ret)
                        return ret;
                p->rss_mode = be32_to_cpu(rvc.u.basicvirtual.defaultq_to_udpen);
        }
        return 0;
}

/**
 *      t4_init_portinfo - allocate a virtual interface and initialize port_info
 *      @pi: the port_info
 *      @mbox: mailbox to use for the FW command
 *      @port: physical port associated with the VI
 *      @pf: the PF owning the VI
 *      @vf: the VF owning the VI
 *      @mac: the MAC address of the VI
 *
 *      Allocates a virtual interface for the given physical port.  If @mac is
 *      not %NULL it contains the MAC address of the VI as assigned by FW.
 *      @mac should be large enough to hold an Ethernet address.
 *      Returns < 0 on error.
 */
int t4_init_portinfo(struct port_info *pi, int mbox,
                     int port, int pf, int vf, u8 mac[])
{
        struct adapter *adapter = pi->adapter;
        unsigned int fw_caps = adapter->params.fw_caps_support;
        struct fw_port_cmd cmd;
        unsigned int rss_size;
        enum fw_port_type port_type;
        int mdio_addr;
        fw_port_cap32_t pcaps, acaps;
        u8 vivld = 0, vin = 0;
        int ret;

        /* If we haven't yet determined whether we're talking to Firmware
         * which knows the new 32-bit Port Capabilities, it's time to find
         * out now.  This will also tell new Firmware to send us Port Status
         * Updates using the new 32-bit Port Capabilities version of the
         * Port Information message.
         */
        if (fw_caps == FW_CAPS_UNKNOWN) {
                u32 param, val;

                param = (FW_PARAMS_MNEM_V(FW_PARAMS_MNEM_PFVF) |
                         FW_PARAMS_PARAM_X_V(FW_PARAMS_PARAM_PFVF_PORT_CAPS32));
                val = 1;
                ret = t4_set_params(adapter, mbox, pf, vf, 1, &param, &val);
                fw_caps = (ret == 0 ? FW_CAPS32 : FW_CAPS16);
                adapter->params.fw_caps_support = fw_caps;
        }

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_portid = cpu_to_be32(FW_CMD_OP_V(FW_PORT_CMD) |
                                       FW_CMD_REQUEST_F | FW_CMD_READ_F |
                                       FW_PORT_CMD_PORTID_V(port));
        cmd.action_to_len16 = cpu_to_be32(
                FW_PORT_CMD_ACTION_V(fw_caps == FW_CAPS16
                                     ? FW_PORT_ACTION_GET_PORT_INFO
                                     : FW_PORT_ACTION_GET_PORT_INFO32) |
                FW_LEN16(cmd));
        ret = t4_wr_mbox(pi->adapter, mbox, &cmd, sizeof(cmd), &cmd);
        if (ret)
                return ret;

        /* Extract the various fields from the Port Information message.
         */
        if (fw_caps == FW_CAPS16) {
                u32 lstatus = be32_to_cpu(cmd.u.info.lstatus_to_modtype);

                port_type = FW_PORT_CMD_PTYPE_G(lstatus);
                mdio_addr = ((lstatus & FW_PORT_CMD_MDIOCAP_F)
                             ? FW_PORT_CMD_MDIOADDR_G(lstatus)
                             : -1);
                pcaps = fwcaps16_to_caps32(be16_to_cpu(cmd.u.info.pcap));
                acaps = fwcaps16_to_caps32(be16_to_cpu(cmd.u.info.acap));
        } else {
                u32 lstatus32 = be32_to_cpu(cmd.u.info32.lstatus32_to_cbllen32);

                port_type = FW_PORT_CMD_PORTTYPE32_G(lstatus32);
                mdio_addr = ((lstatus32 & FW_PORT_CMD_MDIOCAP32_F)
                             ? FW_PORT_CMD_MDIOADDR32_G(lstatus32)
                             : -1);
                pcaps = be32_to_cpu(cmd.u.info32.pcaps32);
                acaps = be32_to_cpu(cmd.u.info32.acaps32);
        }

        ret = t4_alloc_vi(pi->adapter, mbox, port, pf, vf, 1, mac, &rss_size,
                          &vivld, &vin);
        if (ret < 0)
                return ret;

        pi->viid = ret;
        pi->tx_chan = port;
        pi->lport = port;
        pi->rss_size = rss_size;
        pi->rx_cchan = t4_get_tp_e2c_map(pi->adapter, port);

        /* If fw supports returning the VIN as part of FW_VI_CMD,
         * save the returned values.
         */
        if (adapter->params.viid_smt_extn_support) {
                pi->vivld = vivld;
                pi->vin = vin;
        } else {
                /* Retrieve the values from VIID */
                pi->vivld = FW_VIID_VIVLD_G(pi->viid);
                pi->vin =  FW_VIID_VIN_G(pi->viid);
        }

        pi->port_type = port_type;
        pi->mdio_addr = mdio_addr;
        pi->mod_type = FW_PORT_MOD_TYPE_NA;

        init_link_config(&pi->link_cfg, pcaps, acaps);
        return 0;
}

int t4_port_init(struct adapter *adap, int mbox, int pf, int vf)
{
        u8 addr[6];
        int ret, i, j = 0;

        for_each_port(adap, i) {
                struct port_info *pi = adap2pinfo(adap, i);

                while ((adap->params.portvec & (1 << j)) == 0)
                        j++;

                ret = t4_init_portinfo(pi, mbox, j, pf, vf, addr);
                if (ret)
                        return ret;

                eth_hw_addr_set(adap->port[i], addr);
                j++;
        }
        return 0;
}

int t4_init_port_mirror(struct port_info *pi, u8 mbox, u8 port, u8 pf, u8 vf,
                        u16 *mirror_viid)
{
        int ret;

        ret = t4_alloc_vi(pi->adapter, mbox, port, pf, vf, 1, NULL, NULL,
                          NULL, NULL);
        if (ret < 0)
                return ret;

        if (mirror_viid)
                *mirror_viid = ret;

        return 0;
}

/**
 *      t4_read_cimq_cfg - read CIM queue configuration
 *      @adap: the adapter
 *      @base: holds the queue base addresses in bytes
 *      @size: holds the queue sizes in bytes
 *      @thres: holds the queue full thresholds in bytes
 *
 *      Returns the current configuration of the CIM queues, starting with
 *      the IBQs, then the OBQs.
 */
void t4_read_cimq_cfg(struct adapter *adap, u16 *base, u16 *size, u16 *thres)
{
        unsigned int i, v;
        int cim_num_obq = is_t4(adap->params.chip) ?
                                CIM_NUM_OBQ : CIM_NUM_OBQ_T5;

        for (i = 0; i < CIM_NUM_IBQ; i++) {
                t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, IBQSELECT_F |
                             QUENUMSELECT_V(i));
                v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A);
                /* value is in 256-byte units */
                *base++ = CIMQBASE_G(v) * 256;
                *size++ = CIMQSIZE_G(v) * 256;
                *thres++ = QUEFULLTHRSH_G(v) * 8; /* 8-byte unit */
        }
        for (i = 0; i < cim_num_obq; i++) {
                t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, OBQSELECT_F |
                             QUENUMSELECT_V(i));
                v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A);
                /* value is in 256-byte units */
                *base++ = CIMQBASE_G(v) * 256;
                *size++ = CIMQSIZE_G(v) * 256;
        }
}

/**
 *      t4_read_cim_ibq - read the contents of a CIM inbound queue
 *      @adap: the adapter
 *      @qid: the queue index
 *      @data: where to store the queue contents
 *      @n: capacity of @data in 32-bit words
 *
 *      Reads the contents of the selected CIM queue starting at address 0 up
 *      to the capacity of @data.  @n must be a multiple of 4.  Returns < 0 on
 *      error and the number of 32-bit words actually read on success.
 */
int t4_read_cim_ibq(struct adapter *adap, unsigned int qid, u32 *data, size_t n)
{
        int i, err, attempts;
        unsigned int addr;
        const unsigned int nwords = CIM_IBQ_SIZE * 4;

        if (qid > 5 || (n & 3))
                return -EINVAL;

        addr = qid * nwords;
        if (n > nwords)
                n = nwords;

        /* It might take 3-10ms before the IBQ debug read access is allowed.
         * Wait for 1 Sec with a delay of 1 usec.
         */
        attempts = 1000000;

        for (i = 0; i < n; i++, addr++) {
                t4_write_reg(adap, CIM_IBQ_DBG_CFG_A, IBQDBGADDR_V(addr) |
                             IBQDBGEN_F);
                err = t4_wait_op_done(adap, CIM_IBQ_DBG_CFG_A, IBQDBGBUSY_F, 0,
                                      attempts, 1);
                if (err)
                        return err;
                *data++ = t4_read_reg(adap, CIM_IBQ_DBG_DATA_A);
        }
        t4_write_reg(adap, CIM_IBQ_DBG_CFG_A, 0);
        return i;
}

/**
 *      t4_read_cim_obq - read the contents of a CIM outbound queue
 *      @adap: the adapter
 *      @qid: the queue index
 *      @data: where to store the queue contents
 *      @n: capacity of @data in 32-bit words
 *
 *      Reads the contents of the selected CIM queue starting at address 0 up
 *      to the capacity of @data.  @n must be a multiple of 4.  Returns < 0 on
 *      error and the number of 32-bit words actually read on success.
 */
int t4_read_cim_obq(struct adapter *adap, unsigned int qid, u32 *data, size_t n)
{
        int i, err;
        unsigned int addr, v, nwords;
        int cim_num_obq = is_t4(adap->params.chip) ?
                                CIM_NUM_OBQ : CIM_NUM_OBQ_T5;

        if ((qid > (cim_num_obq - 1)) || (n & 3))
                return -EINVAL;

        t4_write_reg(adap, CIM_QUEUE_CONFIG_REF_A, OBQSELECT_F |
                     QUENUMSELECT_V(qid));
        v = t4_read_reg(adap, CIM_QUEUE_CONFIG_CTRL_A);

        addr = CIMQBASE_G(v) * 64;    /* muliple of 256 -> muliple of 4 */
        nwords = CIMQSIZE_G(v) * 64;  /* same */
        if (n > nwords)
                n = nwords;

        for (i = 0; i < n; i++, addr++) {
                t4_write_reg(adap, CIM_OBQ_DBG_CFG_A, OBQDBGADDR_V(addr) |
                             OBQDBGEN_F);
                err = t4_wait_op_done(adap, CIM_OBQ_DBG_CFG_A, OBQDBGBUSY_F, 0,
                                      2, 1);
                if (err)
                        return err;
                *data++ = t4_read_reg(adap, CIM_OBQ_DBG_DATA_A);
        }
        t4_write_reg(adap, CIM_OBQ_DBG_CFG_A, 0);
        return i;
}

/**
 *      t4_cim_read - read a block from CIM internal address space
 *      @adap: the adapter
 *      @addr: the start address within the CIM address space
 *      @n: number of words to read
 *      @valp: where to store the result
 *
 *      Reads a block of 4-byte words from the CIM intenal address space.
 */
int t4_cim_read(struct adapter *adap, unsigned int addr, unsigned int n,
                unsigned int *valp)
{
        int ret = 0;

        if (t4_read_reg(adap, CIM_HOST_ACC_CTRL_A) & HOSTBUSY_F)
                return -EBUSY;

        for ( ; !ret && n--; addr += 4) {
                t4_write_reg(adap, CIM_HOST_ACC_CTRL_A, addr);
                ret = t4_wait_op_done(adap, CIM_HOST_ACC_CTRL_A, HOSTBUSY_F,
                                      0, 5, 2);
                if (!ret)
                        *valp++ = t4_read_reg(adap, CIM_HOST_ACC_DATA_A);
        }
        return ret;
}

/**
 *      t4_cim_write - write a block into CIM internal address space
 *      @adap: the adapter
 *      @addr: the start address within the CIM address space
 *      @n: number of words to write
 *      @valp: set of values to write
 *
 *      Writes a block of 4-byte words into the CIM intenal address space.
 */
int t4_cim_write(struct adapter *adap, unsigned int addr, unsigned int n,
                 const unsigned int *valp)
{
        int ret = 0;

        if (t4_read_reg(adap, CIM_HOST_ACC_CTRL_A) & HOSTBUSY_F)
                return -EBUSY;

        for ( ; !ret && n--; addr += 4) {
                t4_write_reg(adap, CIM_HOST_ACC_DATA_A, *valp++);
                t4_write_reg(adap, CIM_HOST_ACC_CTRL_A, addr | HOSTWRITE_F);
                ret = t4_wait_op_done(adap, CIM_HOST_ACC_CTRL_A, HOSTBUSY_F,
                                      0, 5, 2);
        }
        return ret;
}

static int t4_cim_write1(struct adapter *adap, unsigned int addr,
                         unsigned int val)
{
        return t4_cim_write(adap, addr, 1, &val);
}

/**
 *      t4_cim_read_la - read CIM LA capture buffer
 *      @adap: the adapter
 *      @la_buf: where to store the LA data
 *      @wrptr: the HW write pointer within the capture buffer
 *
 *      Reads the contents of the CIM LA buffer with the most recent entry at
 *      the end of the returned data and with the entry at @wrptr first.
 *      We try to leave the LA in the running state we find it in.
 */
int t4_cim_read_la(struct adapter *adap, u32 *la_buf, unsigned int *wrptr)
{
        int i, ret;
        unsigned int cfg, val, idx;

        ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &cfg);
        if (ret)
                return ret;

        if (cfg & UPDBGLAEN_F) {        /* LA is running, freeze it */
                ret = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A, 0);
                if (ret)
                        return ret;
        }

        ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &val);
        if (ret)
                goto restart;

        idx = UPDBGLAWRPTR_G(val);
        if (wrptr)
                *wrptr = idx;

        for (i = 0; i < adap->params.cim_la_size; i++) {
                ret = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A,
                                    UPDBGLARDPTR_V(idx) | UPDBGLARDEN_F);
                if (ret)
                        break;
                ret = t4_cim_read(adap, UP_UP_DBG_LA_CFG_A, 1, &val);
                if (ret)
                        break;
                if (val & UPDBGLARDEN_F) {
                        ret = -ETIMEDOUT;
                        break;
                }
                ret = t4_cim_read(adap, UP_UP_DBG_LA_DATA_A, 1, &la_buf[i]);
                if (ret)
                        break;

                /* Bits 0-3 of UpDbgLaRdPtr can be between 0000 to 1001 to
                 * identify the 32-bit portion of the full 312-bit data
                 */
                if (is_t6(adap->params.chip) && (idx & 0xf) >= 9)
                        idx = (idx & 0xff0) + 0x10;
                else
                        idx++;
                /* address can't exceed 0xfff */
                idx &= UPDBGLARDPTR_M;
        }
restart:
        if (cfg & UPDBGLAEN_F) {
                int r = t4_cim_write1(adap, UP_UP_DBG_LA_CFG_A,
                                      cfg & ~UPDBGLARDEN_F);
                if (!ret)
                        ret = r;
        }
        return ret;
}

/**
 *      t4_tp_read_la - read TP LA capture buffer
 *      @adap: the adapter
 *      @la_buf: where to store the LA data
 *      @wrptr: the HW write pointer within the capture buffer
 *
 *      Reads the contents of the TP LA buffer with the most recent entry at
 *      the end of the returned data and with the entry at @wrptr first.
 *      We leave the LA in the running state we find it in.
 */
void t4_tp_read_la(struct adapter *adap, u64 *la_buf, unsigned int *wrptr)
{
        bool last_incomplete;
        unsigned int i, cfg, val, idx;

        cfg = t4_read_reg(adap, TP_DBG_LA_CONFIG_A) & 0xffff;
        if (cfg & DBGLAENABLE_F)                        /* freeze LA */
                t4_write_reg(adap, TP_DBG_LA_CONFIG_A,
                             adap->params.tp.la_mask | (cfg ^ DBGLAENABLE_F));

        val = t4_read_reg(adap, TP_DBG_LA_CONFIG_A);
        idx = DBGLAWPTR_G(val);
        last_incomplete = DBGLAMODE_G(val) >= 2 && (val & DBGLAWHLF_F) == 0;
        if (last_incomplete)
                idx = (idx + 1) & DBGLARPTR_M;
        if (wrptr)
                *wrptr = idx;

        val &= 0xffff;
        val &= ~DBGLARPTR_V(DBGLARPTR_M);
        val |= adap->params.tp.la_mask;

        for (i = 0; i < TPLA_SIZE; i++) {
                t4_write_reg(adap, TP_DBG_LA_CONFIG_A, DBGLARPTR_V(idx) | val);
                la_buf[i] = t4_read_reg64(adap, TP_DBG_LA_DATAL_A);
                idx = (idx + 1) & DBGLARPTR_M;
        }

        /* Wipe out last entry if it isn't valid */
        if (last_incomplete)
                la_buf[TPLA_SIZE - 1] = ~0ULL;

        if (cfg & DBGLAENABLE_F)                    /* restore running state */
                t4_write_reg(adap, TP_DBG_LA_CONFIG_A,
                             cfg | adap->params.tp.la_mask);
}

/* SGE Hung Ingress DMA Warning Threshold time and Warning Repeat Rate (in
 * seconds).  If we find one of the SGE Ingress DMA State Machines in the same
 * state for more than the Warning Threshold then we'll issue a warning about
 * a potential hang.  We'll repeat the warning as the SGE Ingress DMA Channel
 * appears to be hung every Warning Repeat second till the situation clears.
 * If the situation clears, we'll note that as well.
 */
#define SGE_IDMA_WARN_THRESH 1
#define SGE_IDMA_WARN_REPEAT 300

/**
 *      t4_idma_monitor_init - initialize SGE Ingress DMA Monitor
 *      @adapter: the adapter
 *      @idma: the adapter IDMA Monitor state
 *
 *      Initialize the state of an SGE Ingress DMA Monitor.
 */
void t4_idma_monitor_init(struct adapter *adapter,
                          struct sge_idma_monitor_state *idma)
{
        /* Initialize the state variables for detecting an SGE Ingress DMA
         * hang.  The SGE has internal counters which count up on each clock
         * tick whenever the SGE finds its Ingress DMA State Engines in the
         * same state they were on the previous clock tick.  The clock used is
         * the Core Clock so we have a limit on the maximum "time" they can
         * record; typically a very small number of seconds.  For instance,
         * with a 600MHz Core Clock, we can only count up to a bit more than
         * 7s.  So we'll synthesize a larger counter in order to not run the
         * risk of having the "timers" overflow and give us the flexibility to
         * maintain a Hung SGE State Machine of our own which operates across
         * a longer time frame.
         */
        idma->idma_1s_thresh = core_ticks_per_usec(adapter) * 1000000; /* 1s */
        idma->idma_stalled[0] = 0;
        idma->idma_stalled[1] = 0;
}

/**
 *      t4_idma_monitor - monitor SGE Ingress DMA state
 *      @adapter: the adapter
 *      @idma: the adapter IDMA Monitor state
 *      @hz: number of ticks/second
 *      @ticks: number of ticks since the last IDMA Monitor call
 */
void t4_idma_monitor(struct adapter *adapter,
                     struct sge_idma_monitor_state *idma,
                     int hz, int ticks)
{
        int i, idma_same_state_cnt[2];

         /* Read the SGE Debug Ingress DMA Same State Count registers.  These
          * are counters inside the SGE which count up on each clock when the
          * SGE finds its Ingress DMA State Engines in the same states they
          * were in the previous clock.  The counters will peg out at
          * 0xffffffff without wrapping around so once they pass the 1s
          * threshold they'll stay above that till the IDMA state changes.
          */
        t4_write_reg(adapter, SGE_DEBUG_INDEX_A, 13);
        idma_same_state_cnt[0] = t4_read_reg(adapter, SGE_DEBUG_DATA_HIGH_A);
        idma_same_state_cnt[1] = t4_read_reg(adapter, SGE_DEBUG_DATA_LOW_A);

        for (i = 0; i < 2; i++) {
                u32 debug0, debug11;

                /* If the Ingress DMA Same State Counter ("timer") is less
                 * than 1s, then we can reset our synthesized Stall Timer and
                 * continue.  If we have previously emitted warnings about a
                 * potential stalled Ingress Queue, issue a note indicating
                 * that the Ingress Queue has resumed forward progress.
                 */
                if (idma_same_state_cnt[i] < idma->idma_1s_thresh) {
                        if (idma->idma_stalled[i] >= SGE_IDMA_WARN_THRESH * hz)
                                dev_warn(adapter->pdev_dev, "SGE idma%d, queue %u, "
                                         "resumed after %d seconds\n",
                                         i, idma->idma_qid[i],
                                         idma->idma_stalled[i] / hz);
                        idma->idma_stalled[i] = 0;
                        continue;
                }

                /* Synthesize an SGE Ingress DMA Same State Timer in the Hz
                 * domain.  The first time we get here it'll be because we
                 * passed the 1s Threshold; each additional time it'll be
                 * because the RX Timer Callback is being fired on its regular
                 * schedule.
                 *
                 * If the stall is below our Potential Hung Ingress Queue
                 * Warning Threshold, continue.
                 */
                if (idma->idma_stalled[i] == 0) {
                        idma->idma_stalled[i] = hz;
                        idma->idma_warn[i] = 0;
                } else {
                        idma->idma_stalled[i] += ticks;
                        idma->idma_warn[i] -= ticks;
                }

                if (idma->idma_stalled[i] < SGE_IDMA_WARN_THRESH * hz)
                        continue;

                /* We'll issue a warning every SGE_IDMA_WARN_REPEAT seconds.
                 */
                if (idma->idma_warn[i] > 0)
                        continue;
                idma->idma_warn[i] = SGE_IDMA_WARN_REPEAT * hz;

                /* Read and save the SGE IDMA State and Queue ID information.
                 * We do this every time in case it changes across time ...
                 * can't be too careful ...
                 */
                t4_write_reg(adapter, SGE_DEBUG_INDEX_A, 0);
                debug0 = t4_read_reg(adapter, SGE_DEBUG_DATA_LOW_A);
                idma->idma_state[i] = (debug0 >> (i * 9)) & 0x3f;

                t4_write_reg(adapter, SGE_DEBUG_INDEX_A, 11);
                debug11 = t4_read_reg(adapter, SGE_DEBUG_DATA_LOW_A);
                idma->idma_qid[i] = (debug11 >> (i * 16)) & 0xffff;

                dev_warn(adapter->pdev_dev, "SGE idma%u, queue %u, potentially stuck in "
                         "state %u for %d seconds (debug0=%#x, debug11=%#x)\n",
                         i, idma->idma_qid[i], idma->idma_state[i],
                         idma->idma_stalled[i] / hz,
                         debug0, debug11);
                t4_sge_decode_idma_state(adapter, idma->idma_state[i]);
        }
}

/**
 *      t4_load_cfg - download config file
 *      @adap: the adapter
 *      @cfg_data: the cfg text file to write
 *      @size: text file size
 *
 *      Write the supplied config text file to the card's serial flash.
 */
int t4_load_cfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
{
        int ret, i, n, cfg_addr;
        unsigned int addr;
        unsigned int flash_cfg_start_sec;
        unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec;

        cfg_addr = t4_flash_cfg_addr(adap);
        if (cfg_addr < 0)
                return cfg_addr;

        addr = cfg_addr;
        flash_cfg_start_sec = addr / SF_SEC_SIZE;

        if (size > FLASH_CFG_MAX_SIZE) {
                dev_err(adap->pdev_dev, "cfg file too large, max is %u bytes\n",
                        FLASH_CFG_MAX_SIZE);
                return -EFBIG;
        }

        i = DIV_ROUND_UP(FLASH_CFG_MAX_SIZE,    /* # of sectors spanned */
                         sf_sec_size);
        ret = t4_flash_erase_sectors(adap, flash_cfg_start_sec,
                                     flash_cfg_start_sec + i - 1);
        /* If size == 0 then we're simply erasing the FLASH sectors associated
         * with the on-adapter Firmware Configuration File.
         */
        if (ret || size == 0)
                goto out;

        /* this will write to the flash up to SF_PAGE_SIZE at a time */
        for (i = 0; i < size; i += SF_PAGE_SIZE) {
                if ((size - i) <  SF_PAGE_SIZE)
                        n = size - i;
                else
                        n = SF_PAGE_SIZE;
                ret = t4_write_flash(adap, addr, n, cfg_data, true);
                if (ret)
                        goto out;

                addr += SF_PAGE_SIZE;
                cfg_data += SF_PAGE_SIZE;
        }

out:
        if (ret)
                dev_err(adap->pdev_dev, "config file %s failed %d\n",
                        (size == 0 ? "clear" : "download"), ret);
        return ret;
}

/**
 *      t4_set_vf_mac_acl - Set MAC address for the specified VF
 *      @adapter: The adapter
 *      @vf: one of the VFs instantiated by the specified PF
 *      @start: The start port id associated with specified VF
 *      @naddr: the number of MAC addresses
 *      @addr: the MAC address(es) to be set to the specified VF
 */
int t4_set_vf_mac_acl(struct adapter *adapter, unsigned int vf,
                      u8 start, unsigned int naddr, u8 *addr)
{
        struct fw_acl_mac_cmd cmd;

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_ACL_MAC_CMD) |
                                    FW_CMD_REQUEST_F |
                                    FW_CMD_WRITE_F |
                                    FW_ACL_MAC_CMD_PFN_V(adapter->pf) |
                                    FW_ACL_MAC_CMD_VFN_V(vf));

        /* Note: Do not enable the ACL */
        cmd.en_to_len16 = cpu_to_be32((unsigned int)FW_LEN16(cmd));
        cmd.nmac = naddr;

        switch (start) {
        case 3:
                memcpy(cmd.macaddr3, addr, sizeof(cmd.macaddr3));
                break;
        case 2:
                memcpy(cmd.macaddr2, addr, sizeof(cmd.macaddr2));
                break;
        case 1:
                memcpy(cmd.macaddr1, addr, sizeof(cmd.macaddr1));
                break;
        case 0:
                memcpy(cmd.macaddr0, addr, sizeof(cmd.macaddr0));
                break;
        }

        return t4_wr_mbox(adapter, adapter->mbox, &cmd, sizeof(cmd), &cmd);
}

/**
 * t4_read_pace_tbl - read the pace table
 * @adap: the adapter
 * @pace_vals: holds the returned values
 *
 * Returns the values of TP's pace table in microseconds.
 */
void t4_read_pace_tbl(struct adapter *adap, unsigned int pace_vals[NTX_SCHED])
{
        unsigned int i, v;

        for (i = 0; i < NTX_SCHED; i++) {
                t4_write_reg(adap, TP_PACE_TABLE_A, 0xffff0000 + i);
                v = t4_read_reg(adap, TP_PACE_TABLE_A);
                pace_vals[i] = dack_ticks_to_usec(adap, v);
        }
}

/**
 * t4_get_tx_sched - get the configuration of a Tx HW traffic scheduler
 * @adap: the adapter
 * @sched: the scheduler index
 * @kbps: the byte rate in Kbps
 * @ipg: the interpacket delay in tenths of nanoseconds
 * @sleep_ok: if true we may sleep while awaiting command completion
 *
 * Return the current configuration of a HW Tx scheduler.
 */
void t4_get_tx_sched(struct adapter *adap, unsigned int sched,
                     unsigned int *kbps, unsigned int *ipg, bool sleep_ok)
{
        unsigned int v, addr, bpt, cpt;

        if (kbps) {
                addr = TP_TX_MOD_Q1_Q0_RATE_LIMIT_A - sched / 2;
                t4_tp_tm_pio_read(adap, &v, 1, addr, sleep_ok);
                if (sched & 1)
                        v >>= 16;
                bpt = (v >> 8) & 0xff;
                cpt = v & 0xff;
                if (!cpt) {
                        *kbps = 0;      /* scheduler disabled */
                } else {
                        v = (adap->params.vpd.cclk * 1000) / cpt; /* ticks/s */
                        *kbps = (v * bpt) / 125;
                }
        }
        if (ipg) {
                addr = TP_TX_MOD_Q1_Q0_TIMER_SEPARATOR_A - sched / 2;
                t4_tp_tm_pio_read(adap, &v, 1, addr, sleep_ok);
                if (sched & 1)
                        v >>= 16;
                v &= 0xffff;
                *ipg = (10000 * v) / core_ticks_per_usec(adap);
        }
}

/* t4_sge_ctxt_rd - read an SGE context through FW
 * @adap: the adapter
 * @mbox: mailbox to use for the FW command
 * @cid: the context id
 * @ctype: the context type
 * @data: where to store the context data
 *
 * Issues a FW command through the given mailbox to read an SGE context.
 */
int t4_sge_ctxt_rd(struct adapter *adap, unsigned int mbox, unsigned int cid,
                   enum ctxt_type ctype, u32 *data)
{
        struct fw_ldst_cmd c;
        int ret;

        if (ctype == CTXT_FLM)
                ret = FW_LDST_ADDRSPC_SGE_FLMC;
        else
                ret = FW_LDST_ADDRSPC_SGE_CONMC;

        memset(&c, 0, sizeof(c));
        c.op_to_addrspace = cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
                                        FW_CMD_REQUEST_F | FW_CMD_READ_F |
                                        FW_LDST_CMD_ADDRSPACE_V(ret));
        c.cycles_to_len16 = cpu_to_be32(FW_LEN16(c));
        c.u.idctxt.physid = cpu_to_be32(cid);

        ret = t4_wr_mbox(adap, mbox, &c, sizeof(c), &c);
        if (ret == 0) {
                data[0] = be32_to_cpu(c.u.idctxt.ctxt_data0);
                data[1] = be32_to_cpu(c.u.idctxt.ctxt_data1);
                data[2] = be32_to_cpu(c.u.idctxt.ctxt_data2);
                data[3] = be32_to_cpu(c.u.idctxt.ctxt_data3);
                data[4] = be32_to_cpu(c.u.idctxt.ctxt_data4);
                data[5] = be32_to_cpu(c.u.idctxt.ctxt_data5);
        }
        return ret;
}

/**
 * t4_sge_ctxt_rd_bd - read an SGE context bypassing FW
 * @adap: the adapter
 * @cid: the context id
 * @ctype: the context type
 * @data: where to store the context data
 *
 * Reads an SGE context directly, bypassing FW.  This is only for
 * debugging when FW is unavailable.
 */
int t4_sge_ctxt_rd_bd(struct adapter *adap, unsigned int cid,
                      enum ctxt_type ctype, u32 *data)
{
        int i, ret;

        t4_write_reg(adap, SGE_CTXT_CMD_A, CTXTQID_V(cid) | CTXTTYPE_V(ctype));
        ret = t4_wait_op_done(adap, SGE_CTXT_CMD_A, BUSY_F, 0, 3, 1);
        if (!ret)
                for (i = SGE_CTXT_DATA0_A; i <= SGE_CTXT_DATA5_A; i += 4)
                        *data++ = t4_read_reg(adap, i);
        return ret;
}

int t4_sched_params(struct adapter *adapter, u8 type, u8 level, u8 mode,
                    u8 rateunit, u8 ratemode, u8 channel, u8 class,
                    u32 minrate, u32 maxrate, u16 weight, u16 pktsize,
                    u16 burstsize)
{
        struct fw_sched_cmd cmd;

        memset(&cmd, 0, sizeof(cmd));
        cmd.op_to_write = cpu_to_be32(FW_CMD_OP_V(FW_SCHED_CMD) |
                                      FW_CMD_REQUEST_F |
                                      FW_CMD_WRITE_F);
        cmd.retval_len16 = cpu_to_be32(FW_LEN16(cmd));

        cmd.u.params.sc = FW_SCHED_SC_PARAMS;
        cmd.u.params.type = type;
        cmd.u.params.level = level;
        cmd.u.params.mode = mode;
        cmd.u.params.ch = channel;
        cmd.u.params.cl = class;
        cmd.u.params.unit = rateunit;
        cmd.u.params.rate = ratemode;
        cmd.u.params.min = cpu_to_be32(minrate);
        cmd.u.params.max = cpu_to_be32(maxrate);
        cmd.u.params.weight = cpu_to_be16(weight);
        cmd.u.params.pktsize = cpu_to_be16(pktsize);
        cmd.u.params.burstsize = cpu_to_be16(burstsize);

        return t4_wr_mbox_meat(adapter, adapter->mbox, &cmd, sizeof(cmd),
                               NULL, 1);
}

/**
 *      t4_i2c_rd - read I2C data from adapter
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @port: Port number if per-port device; <0 if not
 *      @devid: per-port device ID or absolute device ID
 *      @offset: byte offset into device I2C space
 *      @len: byte length of I2C space data
 *      @buf: buffer in which to return I2C data
 *
 *      Reads the I2C data from the indicated device and location.
 */
int t4_i2c_rd(struct adapter *adap, unsigned int mbox, int port,
              unsigned int devid, unsigned int offset,
              unsigned int len, u8 *buf)
{
        struct fw_ldst_cmd ldst_cmd, ldst_rpl;
        unsigned int i2c_max = sizeof(ldst_cmd.u.i2c.data);
        int ret = 0;

        if (len > I2C_PAGE_SIZE)
                return -EINVAL;

        /* Dont allow reads that spans multiple pages */
        if (offset < I2C_PAGE_SIZE && offset + len > I2C_PAGE_SIZE)
                return -EINVAL;

        memset(&ldst_cmd, 0, sizeof(ldst_cmd));
        ldst_cmd.op_to_addrspace =
                cpu_to_be32(FW_CMD_OP_V(FW_LDST_CMD) |
                            FW_CMD_REQUEST_F |
                            FW_CMD_READ_F |
                            FW_LDST_CMD_ADDRSPACE_V(FW_LDST_ADDRSPC_I2C));
        ldst_cmd.cycles_to_len16 = cpu_to_be32(FW_LEN16(ldst_cmd));
        ldst_cmd.u.i2c.pid = (port < 0 ? 0xff : port);
        ldst_cmd.u.i2c.did = devid;

        while (len > 0) {
                unsigned int i2c_len = (len < i2c_max) ? len : i2c_max;

                ldst_cmd.u.i2c.boffset = offset;
                ldst_cmd.u.i2c.blen = i2c_len;

                ret = t4_wr_mbox(adap, mbox, &ldst_cmd, sizeof(ldst_cmd),
                                 &ldst_rpl);
                if (ret)
                        break;

                memcpy(buf, ldst_rpl.u.i2c.data, i2c_len);
                offset += i2c_len;
                buf += i2c_len;
                len -= i2c_len;
        }

        return ret;
}

/**
 *      t4_set_vlan_acl - Set a VLAN id for the specified VF
 *      @adap: the adapter
 *      @mbox: mailbox to use for the FW command
 *      @vf: one of the VFs instantiated by the specified PF
 *      @vlan: The vlanid to be set
 */
int t4_set_vlan_acl(struct adapter *adap, unsigned int mbox, unsigned int vf,
                    u16 vlan)
{
        struct fw_acl_vlan_cmd vlan_cmd;
        unsigned int enable;

        enable = (vlan ? FW_ACL_VLAN_CMD_EN_F : 0);
        memset(&vlan_cmd, 0, sizeof(vlan_cmd));
        vlan_cmd.op_to_vfn = cpu_to_be32(FW_CMD_OP_V(FW_ACL_VLAN_CMD) |
                                         FW_CMD_REQUEST_F |
                                         FW_CMD_WRITE_F |
                                         FW_CMD_EXEC_F |
                                         FW_ACL_VLAN_CMD_PFN_V(adap->pf) |
                                         FW_ACL_VLAN_CMD_VFN_V(vf));
        vlan_cmd.en_to_len16 = cpu_to_be32(enable | FW_LEN16(vlan_cmd));
        /* Drop all packets that donot match vlan id */
        vlan_cmd.dropnovlan_fm = (enable
                                  ? (FW_ACL_VLAN_CMD_DROPNOVLAN_F |
                                     FW_ACL_VLAN_CMD_FM_F) : 0);
        if (enable != 0) {
                vlan_cmd.nvlan = 1;
                vlan_cmd.vlanid[0] = cpu_to_be16(vlan);
        }

        return t4_wr_mbox(adap, adap->mbox, &vlan_cmd, sizeof(vlan_cmd), NULL);
}

/**
 *      modify_device_id - Modifies the device ID of the Boot BIOS image
 *      @device_id: the device ID to write.
 *      @boot_data: the boot image to modify.
 *
 *      Write the supplied device ID to the boot BIOS image.
 */
static void modify_device_id(int device_id, u8 *boot_data)
{
        struct cxgb4_pcir_data *pcir_header;
        struct legacy_pci_rom_hdr *header;
        u8 *cur_header = boot_data;
        u16 pcir_offset;

         /* Loop through all chained images and change the device ID's */
        do {
                header = (struct legacy_pci_rom_hdr *)cur_header;
                pcir_offset = le16_to_cpu(header->pcir_offset);
                pcir_header = (struct cxgb4_pcir_data *)(cur_header +
                              pcir_offset);

                /**
                 * Only modify the Device ID if code type is Legacy or HP.
                 * 0x00: Okay to modify
                 * 0x01: FCODE. Do not modify
                 * 0x03: Okay to modify
                 * 0x04-0xFF: Do not modify
                 */
                if (pcir_header->code_type == CXGB4_HDR_CODE1) {
                        u8 csum = 0;
                        int i;

                        /**
                         * Modify Device ID to match current adatper
                         */
                        pcir_header->device_id = cpu_to_le16(device_id);

                        /**
                         * Set checksum temporarily to 0.
                         * We will recalculate it later.
                         */
                        header->cksum = 0x0;

                        /**
                         * Calculate and update checksum
                         */
                        for (i = 0; i < (header->size512 * 512); i++)
                                csum += cur_header[i];

                        /**
                         * Invert summed value to create the checksum
                         * Writing new checksum value directly to the boot data
                         */
                        cur_header[7] = -csum;

                } else if (pcir_header->code_type == CXGB4_HDR_CODE2) {
                        /**
                         * Modify Device ID to match current adatper
                         */
                        pcir_header->device_id = cpu_to_le16(device_id);
                }

                /**
                 * Move header pointer up to the next image in the ROM.
                 */
                cur_header += header->size512 * 512;
        } while (!(pcir_header->indicator & CXGB4_HDR_INDI));
}

/**
 *      t4_load_boot - download boot flash
 *      @adap: the adapter
 *      @boot_data: the boot image to write
 *      @boot_addr: offset in flash to write boot_data
 *      @size: image size
 *
 *      Write the supplied boot image to the card's serial flash.
 *      The boot image has the following sections: a 28-byte header and the
 *      boot image.
 */
int t4_load_boot(struct adapter *adap, u8 *boot_data,
                 unsigned int boot_addr, unsigned int size)
{
        unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec;
        unsigned int boot_sector = (boot_addr * 1024);
        struct cxgb4_pci_exp_rom_header *header;
        struct cxgb4_pcir_data *pcir_header;
        int pcir_offset;
        unsigned int i;
        u16 device_id;
        int ret, addr;

        /**
         * Make sure the boot image does not encroach on the firmware region
         */
        if ((boot_sector + size) >> 16 > FLASH_FW_START_SEC) {
                dev_err(adap->pdev_dev, "boot image encroaching on firmware region\n");
                return -EFBIG;
        }

        /* Get boot header */
        header = (struct cxgb4_pci_exp_rom_header *)boot_data;
        pcir_offset = le16_to_cpu(header->pcir_offset);
        /* PCIR Data Structure */
        pcir_header = (struct cxgb4_pcir_data *)&boot_data[pcir_offset];

        /**
         * Perform some primitive sanity testing to avoid accidentally
         * writing garbage over the boot sectors.  We ought to check for
         * more but it's not worth it for now ...
         */
        if (size < BOOT_MIN_SIZE || size > BOOT_MAX_SIZE) {
                dev_err(adap->pdev_dev, "boot image too small/large\n");
                return -EFBIG;
        }

        if (le16_to_cpu(header->signature) != BOOT_SIGNATURE) {
                dev_err(adap->pdev_dev, "Boot image missing signature\n");
                return -EINVAL;
        }

        /* Check PCI header signature */
        if (le32_to_cpu(pcir_header->signature) != PCIR_SIGNATURE) {
                dev_err(adap->pdev_dev, "PCI header missing signature\n");
                return -EINVAL;
        }

        /* Check Vendor ID matches Chelsio ID*/
        if (le16_to_cpu(pcir_header->vendor_id) != PCI_VENDOR_ID_CHELSIO) {
                dev_err(adap->pdev_dev, "Vendor ID missing signature\n");
                return -EINVAL;
        }

        /**
         * The boot sector is comprised of the Expansion-ROM boot, iSCSI boot,
         * and Boot configuration data sections. These 3 boot sections span
         * sectors 0 to 7 in flash and live right before the FW image location.
         */
        i = DIV_ROUND_UP(size ? size : FLASH_FW_START,  sf_sec_size);
        ret = t4_flash_erase_sectors(adap, boot_sector >> 16,
                                     (boot_sector >> 16) + i - 1);

        /**
         * If size == 0 then we're simply erasing the FLASH sectors associated
         * with the on-adapter option ROM file
         */
        if (ret || size == 0)
                goto out;
        /* Retrieve adapter's device ID */
        pci_read_config_word(adap->pdev, PCI_DEVICE_ID, &device_id);
       /* Want to deal with PF 0 so I strip off PF 4 indicator */
        device_id = device_id & 0xf0ff;

         /* Check PCIE Device ID */
        if (le16_to_cpu(pcir_header->device_id) != device_id) {
                /**
                 * Change the device ID in the Boot BIOS image to match
                 * the Device ID of the current adapter.
                 */
                modify_device_id(device_id, boot_data);
        }

        /**
         * Skip over the first SF_PAGE_SIZE worth of data and write it after
         * we finish copying the rest of the boot image. This will ensure
         * that the BIOS boot header will only be written if the boot image
         * was written in full.
         */
        addr = boot_sector;
        for (size -= SF_PAGE_SIZE; size; size -= SF_PAGE_SIZE) {
                addr += SF_PAGE_SIZE;
                boot_data += SF_PAGE_SIZE;
                ret = t4_write_flash(adap, addr, SF_PAGE_SIZE, boot_data,
                                     false);
                if (ret)
                        goto out;
        }

        ret = t4_write_flash(adap, boot_sector, SF_PAGE_SIZE,
                             (const u8 *)header, false);

out:
        if (ret)
                dev_err(adap->pdev_dev, "boot image load failed, error %d\n",
                        ret);
        return ret;
}

/**
 *      t4_flash_bootcfg_addr - return the address of the flash
 *      optionrom configuration
 *      @adapter: the adapter
 *
 *      Return the address within the flash where the OptionROM Configuration
 *      is stored, or an error if the device FLASH is too small to contain
 *      a OptionROM Configuration.
 */
static int t4_flash_bootcfg_addr(struct adapter *adapter)
{
        /**
         * If the device FLASH isn't large enough to hold a Firmware
         * Configuration File, return an error.
         */
        if (adapter->params.sf_size <
            FLASH_BOOTCFG_START + FLASH_BOOTCFG_MAX_SIZE)
                return -ENOSPC;

        return FLASH_BOOTCFG_START;
}

int t4_load_bootcfg(struct adapter *adap, const u8 *cfg_data, unsigned int size)
{
        unsigned int sf_sec_size = adap->params.sf_size / adap->params.sf_nsec;
        struct cxgb4_bootcfg_data *header;
        unsigned int flash_cfg_start_sec;
        unsigned int addr, npad;
        int ret, i, n, cfg_addr;

        cfg_addr = t4_flash_bootcfg_addr(adap);
        if (cfg_addr < 0)
                return cfg_addr;

        addr = cfg_addr;
        flash_cfg_start_sec = addr / SF_SEC_SIZE;

        if (size > FLASH_BOOTCFG_MAX_SIZE) {
                dev_err(adap->pdev_dev, "bootcfg file too large, max is %u bytes\n",
                        FLASH_BOOTCFG_MAX_SIZE);
                return -EFBIG;
        }

        header = (struct cxgb4_bootcfg_data *)cfg_data;
        if (le16_to_cpu(header->signature) != BOOT_CFG_SIG) {
                dev_err(adap->pdev_dev, "Wrong bootcfg signature\n");
                ret = -EINVAL;
                goto out;
        }

        i = DIV_ROUND_UP(FLASH_BOOTCFG_MAX_SIZE,
                         sf_sec_size);
        ret = t4_flash_erase_sectors(adap, flash_cfg_start_sec,
                                     flash_cfg_start_sec + i - 1);

        /**
         * If size == 0 then we're simply erasing the FLASH sectors associated
         * with the on-adapter OptionROM Configuration File.
         */
        if (ret || size == 0)
                goto out;

        /* this will write to the flash up to SF_PAGE_SIZE at a time */
        for (i = 0; i < size; i += SF_PAGE_SIZE) {
                n = min_t(u32, size - i, SF_PAGE_SIZE);

                ret = t4_write_flash(adap, addr, n, cfg_data, false);
                if (ret)
                        goto out;

                addr += SF_PAGE_SIZE;
                cfg_data += SF_PAGE_SIZE;
        }

        npad = ((size + 4 - 1) & ~3) - size;
        for (i = 0; i < npad; i++) {
                u8 data = 0;

                ret = t4_write_flash(adap, cfg_addr + size + i, 1, &data,
                                     false);
                if (ret)
                        goto out;
        }

out:
        if (ret)
                dev_err(adap->pdev_dev, "boot config data %s failed %d\n",
                        (size == 0 ? "clear" : "download"), ret);
        return ret;
}