// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * Copyright(c) 2005 - 2006 Attansic Corporation. All rights reserved.
 * Copyright(c) 2006 - 2007 Chris Snook <csnook@redhat.com>
 * Copyright(c) 2006 - 2008 Jay Cliburn <jcliburn@gmail.com>
 *
 * Derived from Intel e1000 driver
 * Copyright(c) 1999 - 2005 Intel Corporation. All rights reserved.
 *
 * Contact Information:
 * Xiong Huang <xiong.huang@atheros.com>
 * Jie Yang <jie.yang@atheros.com>
 * Chris Snook <csnook@redhat.com>
 * Jay Cliburn <jcliburn@gmail.com>
 *
 * This version is adapted from the Attansic reference driver.
 *
 * TODO:
 * Add more ethtool functions.
 * Fix abstruse irq enable/disable condition described here:
 *      http://marc.theaimsgroup.com/?l=linux-netdev&m=116398508500553&w=2
 *
 * NEEDS TESTING:
 * VLAN
 * multicast
 * promiscuous mode
 * interrupt coalescing
 * SMP torture testing
 */

#include <linux/atomic.h>
#include <asm/byteorder.h>

#include <linux/compiler.h>
#include <linux/crc32.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/etherdevice.h>
#include <linux/hardirq.h>
#include <linux/if_ether.h>
#include <linux/if_vlan.h>
#include <linux/in.h>
#include <linux/interrupt.h>
#include <linux/ip.h>
#include <linux/irqflags.h>
#include <linux/irqreturn.h>
#include <linux/jiffies.h>
#include <linux/mii.h>
#include <linux/module.h>
#include <linux/net.h>
#include <linux/netdevice.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
#include <linux/pm.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/string.h>
#include <linux/tcp.h>
#include <linux/timer.h>
#include <linux/types.h>
#include <linux/workqueue.h>

#include <net/checksum.h>

#include "atl1.h"

MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, "
              "Chris Snook <csnook@redhat.com>, "
              "Jay Cliburn <jcliburn@gmail.com>");
MODULE_LICENSE("GPL");

/* Temporary hack for merging atl1 and atl2 */
#include "atlx.c"

static const struct ethtool_ops atl1_ethtool_ops;

/*
 * This is the only thing that needs to be changed to adjust the
 * maximum number of ports that the driver can manage.
 */
#define ATL1_MAX_NIC 4

#define OPTION_UNSET    -1
#define OPTION_DISABLED 0
#define OPTION_ENABLED  1

#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }

/*
 * Interrupt Moderate Timer in units of 2 us
 *
 * Valid Range: 10-65535
 *
 * Default Value: 100 (200us)
 */
static int int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
static unsigned int num_int_mod_timer;
module_param_array_named(int_mod_timer, int_mod_timer, int,
        &num_int_mod_timer, 0);
MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");

#define DEFAULT_INT_MOD_CNT     100     /* 200us */
#define MAX_INT_MOD_CNT         65000
#define MIN_INT_MOD_CNT         50

struct atl1_option {
        enum { enable_option, range_option, list_option } type;
        char *name;
        char *err;
        int def;
        union {
                struct {        /* range_option info */
                        int min;
                        int max;
                } r;
                struct {        /* list_option info */
                        int nr;
                        struct atl1_opt_list {
                                int i;
                                char *str;
                        } *p;
                } l;
        } arg;
};

static int atl1_validate_option(int *value, struct atl1_option *opt,
                                struct pci_dev *pdev)
{
        if (*value == OPTION_UNSET) {
                *value = opt->def;
                return 0;
        }

        switch (opt->type) {
        case enable_option:
                switch (*value) {
                case OPTION_ENABLED:
                        dev_info(&pdev->dev, "%s enabled\n", opt->name);
                        return 0;
                case OPTION_DISABLED:
                        dev_info(&pdev->dev, "%s disabled\n", opt->name);
                        return 0;
                }
                break;
        case range_option:
                if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
                        dev_info(&pdev->dev, "%s set to %i\n", opt->name,
                                *value);
                        return 0;
                }
                break;
        case list_option:{
                        int i;
                        struct atl1_opt_list *ent;

                        for (i = 0; i < opt->arg.l.nr; i++) {
                                ent = &opt->arg.l.p[i];
                                if (*value == ent->i) {
                                        if (ent->str[0] != '\0')
                                                dev_info(&pdev->dev, "%s\n",
                                                        ent->str);
                                        return 0;
                                }
                        }
                }
                break;

        default:
                break;
        }

        dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
                opt->name, *value, opt->err);
        *value = opt->def;
        return -1;
}

/**
 * atl1_check_options - Range Checking for Command Line Parameters
 * @adapter: board private structure
 *
 * This routine checks all command line parameters for valid user
 * input.  If an invalid value is given, or if no user specified
 * value exists, a default value is used.  The final value is stored
 * in a variable in the adapter structure.
 */
static void atl1_check_options(struct atl1_adapter *adapter)
{
        struct pci_dev *pdev = adapter->pdev;
        int bd = adapter->bd_number;
        if (bd >= ATL1_MAX_NIC) {
                dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
                dev_notice(&pdev->dev, "using defaults for all values\n");
        }
        {                       /* Interrupt Moderate Timer */
                struct atl1_option opt = {
                        .type = range_option,
                        .name = "Interrupt Moderator Timer",
                        .err = "using default of "
                                __MODULE_STRING(DEFAULT_INT_MOD_CNT),
                        .def = DEFAULT_INT_MOD_CNT,
                        .arg = {.r = {.min = MIN_INT_MOD_CNT,
                                        .max = MAX_INT_MOD_CNT} }
                };
                int val;
                if (num_int_mod_timer > bd) {
                        val = int_mod_timer[bd];
                        atl1_validate_option(&val, &opt, pdev);
                        adapter->imt = (u16) val;
                } else
                        adapter->imt = (u16) (opt.def);
        }
}

/*
 * atl1_pci_tbl - PCI Device ID Table
 */
static const struct pci_device_id atl1_pci_tbl[] = {
        {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1)},
        /* required last entry */
        {0,}
};
MODULE_DEVICE_TABLE(pci, atl1_pci_tbl);

static const u32 atl1_default_msg = NETIF_MSG_DRV | NETIF_MSG_PROBE |
        NETIF_MSG_LINK | NETIF_MSG_TIMER | NETIF_MSG_IFDOWN | NETIF_MSG_IFUP;

static int debug = -1;
module_param(debug, int, 0);
MODULE_PARM_DESC(debug, "Message level (0=none,...,16=all)");

/*
 * Reset the transmit and receive units; mask and clear all interrupts.
 * hw - Struct containing variables accessed by shared code
 * return : 0  or  idle status (if error)
 */
static s32 atl1_reset_hw(struct atl1_hw *hw)
{
        struct pci_dev *pdev = hw->back->pdev;
        struct atl1_adapter *adapter = hw->back;
        u32 icr;
        int i;

        /*
         * Clear Interrupt mask to stop board from generating
         * interrupts & Clear any pending interrupt events
         */
        /*
         * atlx_irq_disable(adapter);
         * iowrite32(0xffffffff, hw->hw_addr + REG_ISR);
         */

        /*
         * Issue Soft Reset to the MAC.  This will reset the chip's
         * transmit, receive, DMA.  It will not effect
         * the current PCI configuration.  The global reset bit is self-
         * clearing, and should clear within a microsecond.
         */
        iowrite32(MASTER_CTRL_SOFT_RST, hw->hw_addr + REG_MASTER_CTRL);
        ioread32(hw->hw_addr + REG_MASTER_CTRL);

        iowrite16(1, hw->hw_addr + REG_PHY_ENABLE);
        ioread16(hw->hw_addr + REG_PHY_ENABLE);

        /* delay about 1ms */
        msleep(1);

        /* Wait at least 10ms for All module to be Idle */
        for (i = 0; i < 10; i++) {
                icr = ioread32(hw->hw_addr + REG_IDLE_STATUS);
                if (!icr)
                        break;
                /* delay 1 ms */
                msleep(1);
                /* FIXME: still the right way to do this? */
                cpu_relax();
        }

        if (icr) {
                if (netif_msg_hw(adapter))
                        dev_dbg(&pdev->dev, "ICR = 0x%x\n", icr);
                return icr;
        }

        return 0;
}

/* function about EEPROM
 *
 * check_eeprom_exist
 * return 0 if eeprom exist
 */
static int atl1_check_eeprom_exist(struct atl1_hw *hw)
{
        u32 value;
        value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
        if (value & SPI_FLASH_CTRL_EN_VPD) {
                value &= ~SPI_FLASH_CTRL_EN_VPD;
                iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
        }

        value = ioread16(hw->hw_addr + REG_PCIE_CAP_LIST);
        return ((value & 0xFF00) == 0x6C00) ? 0 : 1;
}

static bool atl1_read_eeprom(struct atl1_hw *hw, u32 offset, u32 *p_value)
{
        int i;
        u32 control;

        if (offset & 3)
                /* address do not align */
                return false;

        iowrite32(0, hw->hw_addr + REG_VPD_DATA);
        control = (offset & VPD_CAP_VPD_ADDR_MASK) << VPD_CAP_VPD_ADDR_SHIFT;
        iowrite32(control, hw->hw_addr + REG_VPD_CAP);
        ioread32(hw->hw_addr + REG_VPD_CAP);

        for (i = 0; i < 10; i++) {
                msleep(2);
                control = ioread32(hw->hw_addr + REG_VPD_CAP);
                if (control & VPD_CAP_VPD_FLAG)
                        break;
        }
        if (control & VPD_CAP_VPD_FLAG) {
                *p_value = ioread32(hw->hw_addr + REG_VPD_DATA);
                return true;
        }
        /* timeout */
        return false;
}

/*
 * Reads the value from a PHY register
 * hw - Struct containing variables accessed by shared code
 * reg_addr - address of the PHY register to read
 */
static s32 atl1_read_phy_reg(struct atl1_hw *hw, u16 reg_addr, u16 *phy_data)
{
        u32 val;
        int i;

        val = ((u32) (reg_addr & MDIO_REG_ADDR_MASK)) << MDIO_REG_ADDR_SHIFT |
                MDIO_START | MDIO_SUP_PREAMBLE | MDIO_RW | MDIO_CLK_25_4 <<
                MDIO_CLK_SEL_SHIFT;
        iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
        ioread32(hw->hw_addr + REG_MDIO_CTRL);

        for (i = 0; i < MDIO_WAIT_TIMES; i++) {
                udelay(2);
                val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
                if (!(val & (MDIO_START | MDIO_BUSY)))
                        break;
        }
        if (!(val & (MDIO_START | MDIO_BUSY))) {
                *phy_data = (u16) val;
                return 0;
        }
        return ATLX_ERR_PHY;
}

#define CUSTOM_SPI_CS_SETUP     2
#define CUSTOM_SPI_CLK_HI       2
#define CUSTOM_SPI_CLK_LO       2
#define CUSTOM_SPI_CS_HOLD      2
#define CUSTOM_SPI_CS_HI        3

static bool atl1_spi_read(struct atl1_hw *hw, u32 addr, u32 *buf)
{
        int i;
        u32 value;

        iowrite32(0, hw->hw_addr + REG_SPI_DATA);
        iowrite32(addr, hw->hw_addr + REG_SPI_ADDR);

        value = SPI_FLASH_CTRL_WAIT_READY |
            (CUSTOM_SPI_CS_SETUP & SPI_FLASH_CTRL_CS_SETUP_MASK) <<
            SPI_FLASH_CTRL_CS_SETUP_SHIFT | (CUSTOM_SPI_CLK_HI &
                                             SPI_FLASH_CTRL_CLK_HI_MASK) <<
            SPI_FLASH_CTRL_CLK_HI_SHIFT | (CUSTOM_SPI_CLK_LO &
                                           SPI_FLASH_CTRL_CLK_LO_MASK) <<
            SPI_FLASH_CTRL_CLK_LO_SHIFT | (CUSTOM_SPI_CS_HOLD &
                                           SPI_FLASH_CTRL_CS_HOLD_MASK) <<
            SPI_FLASH_CTRL_CS_HOLD_SHIFT | (CUSTOM_SPI_CS_HI &
                                            SPI_FLASH_CTRL_CS_HI_MASK) <<
            SPI_FLASH_CTRL_CS_HI_SHIFT | (1 & SPI_FLASH_CTRL_INS_MASK) <<
            SPI_FLASH_CTRL_INS_SHIFT;

        iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);

        value |= SPI_FLASH_CTRL_START;
        iowrite32(value, hw->hw_addr + REG_SPI_FLASH_CTRL);
        ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);

        for (i = 0; i < 10; i++) {
                msleep(1);
                value = ioread32(hw->hw_addr + REG_SPI_FLASH_CTRL);
                if (!(value & SPI_FLASH_CTRL_START))
                        break;
        }

        if (value & SPI_FLASH_CTRL_START)
                return false;

        *buf = ioread32(hw->hw_addr + REG_SPI_DATA);

        return true;
}

/*
 * get_permanent_address
 * return 0 if get valid mac address,
 */
static int atl1_get_permanent_address(struct atl1_hw *hw)
{
        u32 addr[2];
        u32 i, control;
        u16 reg;
        u8 eth_addr[ETH_ALEN];
        bool key_valid;

        if (is_valid_ether_addr(hw->perm_mac_addr))
                return 0;

        /* init */
        addr[0] = addr[1] = 0;

        if (!atl1_check_eeprom_exist(hw)) {
                reg = 0;
                key_valid = false;
                /* Read out all EEPROM content */
                i = 0;
                while (1) {
                        if (atl1_read_eeprom(hw, i + 0x100, &control)) {
                                if (key_valid) {
                                        if (reg == REG_MAC_STA_ADDR)
                                                addr[0] = control;
                                        else if (reg == (REG_MAC_STA_ADDR + 4))
                                                addr[1] = control;
                                        key_valid = false;
                                } else if ((control & 0xff) == 0x5A) {
                                        key_valid = true;
                                        reg = (u16) (control >> 16);
                                } else
                                        break;
                        } else
                                /* read error */
                                break;
                        i += 4;
                }

                *(u32 *) &eth_addr[2] = swab32(addr[0]);
                *(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
                if (is_valid_ether_addr(eth_addr)) {
                        memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
                        return 0;
                }
        }

        /* see if SPI FLAGS exist ? */
        addr[0] = addr[1] = 0;
        reg = 0;
        key_valid = false;
        i = 0;
        while (1) {
                if (atl1_spi_read(hw, i + 0x1f000, &control)) {
                        if (key_valid) {
                                if (reg == REG_MAC_STA_ADDR)
                                        addr[0] = control;
                                else if (reg == (REG_MAC_STA_ADDR + 4))
                                        addr[1] = control;
                                key_valid = false;
                        } else if ((control & 0xff) == 0x5A) {
                                key_valid = true;
                                reg = (u16) (control >> 16);
                        } else
                                /* data end */
                                break;
                } else
                        /* read error */
                        break;
                i += 4;
        }

        *(u32 *) &eth_addr[2] = swab32(addr[0]);
        *(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
        if (is_valid_ether_addr(eth_addr)) {
                memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
                return 0;
        }

        /*
         * On some motherboards, the MAC address is written by the
         * BIOS directly to the MAC register during POST, and is
         * not stored in eeprom.  If all else thus far has failed
         * to fetch the permanent MAC address, try reading it directly.
         */
        addr[0] = ioread32(hw->hw_addr + REG_MAC_STA_ADDR);
        addr[1] = ioread16(hw->hw_addr + (REG_MAC_STA_ADDR + 4));
        *(u32 *) &eth_addr[2] = swab32(addr[0]);
        *(u16 *) &eth_addr[0] = swab16(*(u16 *) &addr[1]);
        if (is_valid_ether_addr(eth_addr)) {
                memcpy(hw->perm_mac_addr, eth_addr, ETH_ALEN);
                return 0;
        }

        return 1;
}

/*
 * Reads the adapter's MAC address from the EEPROM
 * hw - Struct containing variables accessed by shared code
 */
static s32 atl1_read_mac_addr(struct atl1_hw *hw)
{
        s32 ret = 0;
        u16 i;

        if (atl1_get_permanent_address(hw)) {
                eth_random_addr(hw->perm_mac_addr);
                ret = 1;
        }

        for (i = 0; i < ETH_ALEN; i++)
                hw->mac_addr[i] = hw->perm_mac_addr[i];
        return ret;
}

/*
 * Hashes an address to determine its location in the multicast table
 * hw - Struct containing variables accessed by shared code
 * mc_addr - the multicast address to hash
 *
 * atl1_hash_mc_addr
 *  purpose
 *      set hash value for a multicast address
 *      hash calcu processing :
 *          1. calcu 32bit CRC for multicast address
 *          2. reverse crc with MSB to LSB
 */
static u32 atl1_hash_mc_addr(struct atl1_hw *hw, u8 *mc_addr)
{
        u32 crc32, value = 0;
        int i;

        crc32 = ether_crc_le(6, mc_addr);
        for (i = 0; i < 32; i++)
                value |= (((crc32 >> i) & 1) << (31 - i));

        return value;
}

/*
 * Sets the bit in the multicast table corresponding to the hash value.
 * hw - Struct containing variables accessed by shared code
 * hash_value - Multicast address hash value
 */
static void atl1_hash_set(struct atl1_hw *hw, u32 hash_value)
{
        u32 hash_bit, hash_reg;
        u32 mta;

        /*
         * The HASH Table  is a register array of 2 32-bit registers.
         * It is treated like an array of 64 bits.  We want to set
         * bit BitArray[hash_value]. So we figure out what register
         * the bit is in, read it, OR in the new bit, then write
         * back the new value.  The register is determined by the
         * upper 7 bits of the hash value and the bit within that
         * register are determined by the lower 5 bits of the value.
         */
        hash_reg = (hash_value >> 31) & 0x1;
        hash_bit = (hash_value >> 26) & 0x1F;
        mta = ioread32((hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
        mta |= (1 << hash_bit);
        iowrite32(mta, (hw->hw_addr + REG_RX_HASH_TABLE) + (hash_reg << 2));
}

/*
 * Writes a value to a PHY register
 * hw - Struct containing variables accessed by shared code
 * reg_addr - address of the PHY register to write
 * data - data to write to the PHY
 */
static s32 atl1_write_phy_reg(struct atl1_hw *hw, u32 reg_addr, u16 phy_data)
{
        int i;
        u32 val;

        val = ((u32) (phy_data & MDIO_DATA_MASK)) << MDIO_DATA_SHIFT |
            (reg_addr & MDIO_REG_ADDR_MASK) << MDIO_REG_ADDR_SHIFT |
            MDIO_SUP_PREAMBLE |
            MDIO_START | MDIO_CLK_25_4 << MDIO_CLK_SEL_SHIFT;
        iowrite32(val, hw->hw_addr + REG_MDIO_CTRL);
        ioread32(hw->hw_addr + REG_MDIO_CTRL);

        for (i = 0; i < MDIO_WAIT_TIMES; i++) {
                udelay(2);
                val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
                if (!(val & (MDIO_START | MDIO_BUSY)))
                        break;
        }

        if (!(val & (MDIO_START | MDIO_BUSY)))
                return 0;

        return ATLX_ERR_PHY;
}

/*
 * Make L001's PHY out of Power Saving State (bug)
 * hw - Struct containing variables accessed by shared code
 * when power on, L001's PHY always on Power saving State
 * (Gigabit Link forbidden)
 */
static s32 atl1_phy_leave_power_saving(struct atl1_hw *hw)
{
        s32 ret;
        ret = atl1_write_phy_reg(hw, 29, 0x0029);
        if (ret)
                return ret;
        return atl1_write_phy_reg(hw, 30, 0);
}

/*
 * Resets the PHY and make all config validate
 * hw - Struct containing variables accessed by shared code
 *
 * Sets bit 15 and 12 of the MII Control regiser (for F001 bug)
 */
static s32 atl1_phy_reset(struct atl1_hw *hw)
{
        struct pci_dev *pdev = hw->back->pdev;
        struct atl1_adapter *adapter = hw->back;
        s32 ret_val;
        u16 phy_data;

        if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
            hw->media_type == MEDIA_TYPE_1000M_FULL)
                phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
        else {
                switch (hw->media_type) {
                case MEDIA_TYPE_100M_FULL:
                        phy_data =
                            MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
                            MII_CR_RESET;
                        break;
                case MEDIA_TYPE_100M_HALF:
                        phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
                        break;
                case MEDIA_TYPE_10M_FULL:
                        phy_data =
                            MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
                        break;
                default:
                        /* MEDIA_TYPE_10M_HALF: */
                        phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
                        break;
                }
        }

        ret_val = atl1_write_phy_reg(hw, MII_BMCR, phy_data);
        if (ret_val) {
                u32 val;
                int i;
                /* pcie serdes link may be down! */
                if (netif_msg_hw(adapter))
                        dev_dbg(&pdev->dev, "pcie phy link down\n");

                for (i = 0; i < 25; i++) {
                        msleep(1);
                        val = ioread32(hw->hw_addr + REG_MDIO_CTRL);
                        if (!(val & (MDIO_START | MDIO_BUSY)))
                                break;
                }

                if ((val & (MDIO_START | MDIO_BUSY)) != 0) {
                        if (netif_msg_hw(adapter))
                                dev_warn(&pdev->dev,
                                        "pcie link down at least 25ms\n");
                        return ret_val;
                }
        }
        return 0;
}

/*
 * Configures PHY autoneg and flow control advertisement settings
 * hw - Struct containing variables accessed by shared code
 */
static s32 atl1_phy_setup_autoneg_adv(struct atl1_hw *hw)
{
        s32 ret_val;
        s16 mii_autoneg_adv_reg;
        s16 mii_1000t_ctrl_reg;

        /* Read the MII Auto-Neg Advertisement Register (Address 4). */
        mii_autoneg_adv_reg = MII_AR_DEFAULT_CAP_MASK;

        /* Read the MII 1000Base-T Control Register (Address 9). */
        mii_1000t_ctrl_reg = MII_ATLX_CR_1000T_DEFAULT_CAP_MASK;

        /*
         * First we clear all the 10/100 mb speed bits in the Auto-Neg
         * Advertisement Register (Address 4) and the 1000 mb speed bits in
         * the  1000Base-T Control Register (Address 9).
         */
        mii_autoneg_adv_reg &= ~MII_AR_SPEED_MASK;
        mii_1000t_ctrl_reg &= ~MII_ATLX_CR_1000T_SPEED_MASK;

        /*
         * Need to parse media_type  and set up
         * the appropriate PHY registers.
         */
        switch (hw->media_type) {
        case MEDIA_TYPE_AUTO_SENSOR:
                mii_autoneg_adv_reg |= (MII_AR_10T_HD_CAPS |
                                        MII_AR_10T_FD_CAPS |
                                        MII_AR_100TX_HD_CAPS |
                                        MII_AR_100TX_FD_CAPS);
                mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
                break;

        case MEDIA_TYPE_1000M_FULL:
                mii_1000t_ctrl_reg |= MII_ATLX_CR_1000T_FD_CAPS;
                break;

        case MEDIA_TYPE_100M_FULL:
                mii_autoneg_adv_reg |= MII_AR_100TX_FD_CAPS;
                break;

        case MEDIA_TYPE_100M_HALF:
                mii_autoneg_adv_reg |= MII_AR_100TX_HD_CAPS;
                break;

        case MEDIA_TYPE_10M_FULL:
                mii_autoneg_adv_reg |= MII_AR_10T_FD_CAPS;
                break;

        default:
                mii_autoneg_adv_reg |= MII_AR_10T_HD_CAPS;
                break;
        }

        /* flow control fixed to enable all */
        mii_autoneg_adv_reg |= (MII_AR_ASM_DIR | MII_AR_PAUSE);

        hw->mii_autoneg_adv_reg = mii_autoneg_adv_reg;
        hw->mii_1000t_ctrl_reg = mii_1000t_ctrl_reg;

        ret_val = atl1_write_phy_reg(hw, MII_ADVERTISE, mii_autoneg_adv_reg);
        if (ret_val)
                return ret_val;

        ret_val = atl1_write_phy_reg(hw, MII_ATLX_CR, mii_1000t_ctrl_reg);
        if (ret_val)
                return ret_val;

        return 0;
}

/*
 * Configures link settings.
 * hw - Struct containing variables accessed by shared code
 * Assumes the hardware has previously been reset and the
 * transmitter and receiver are not enabled.
 */
static s32 atl1_setup_link(struct atl1_hw *hw)
{
        struct pci_dev *pdev = hw->back->pdev;
        struct atl1_adapter *adapter = hw->back;
        s32 ret_val;

        /*
         * Options:
         *  PHY will advertise value(s) parsed from
         *  autoneg_advertised and fc
         *  no matter what autoneg is , We will not wait link result.
         */
        ret_val = atl1_phy_setup_autoneg_adv(hw);
        if (ret_val) {
                if (netif_msg_link(adapter))
                        dev_dbg(&pdev->dev,
                                "error setting up autonegotiation\n");
                return ret_val;
        }
        /* SW.Reset , En-Auto-Neg if needed */
        ret_val = atl1_phy_reset(hw);
        if (ret_val) {
                if (netif_msg_link(adapter))
                        dev_dbg(&pdev->dev, "error resetting phy\n");
                return ret_val;
        }
        hw->phy_configured = true;
        return ret_val;
}

static void atl1_init_flash_opcode(struct atl1_hw *hw)
{
        if (hw->flash_vendor >= ARRAY_SIZE(flash_table))
                /* Atmel */
                hw->flash_vendor = 0;

        /* Init OP table */
        iowrite8(flash_table[hw->flash_vendor].cmd_program,
                hw->hw_addr + REG_SPI_FLASH_OP_PROGRAM);
        iowrite8(flash_table[hw->flash_vendor].cmd_sector_erase,
                hw->hw_addr + REG_SPI_FLASH_OP_SC_ERASE);
        iowrite8(flash_table[hw->flash_vendor].cmd_chip_erase,
                hw->hw_addr + REG_SPI_FLASH_OP_CHIP_ERASE);
        iowrite8(flash_table[hw->flash_vendor].cmd_rdid,
                hw->hw_addr + REG_SPI_FLASH_OP_RDID);
        iowrite8(flash_table[hw->flash_vendor].cmd_wren,
                hw->hw_addr + REG_SPI_FLASH_OP_WREN);
        iowrite8(flash_table[hw->flash_vendor].cmd_rdsr,
                hw->hw_addr + REG_SPI_FLASH_OP_RDSR);
        iowrite8(flash_table[hw->flash_vendor].cmd_wrsr,
                hw->hw_addr + REG_SPI_FLASH_OP_WRSR);
        iowrite8(flash_table[hw->flash_vendor].cmd_read,
                hw->hw_addr + REG_SPI_FLASH_OP_READ);
}

/*
 * Performs basic configuration of the adapter.
 * hw - Struct containing variables accessed by shared code
 * Assumes that the controller has previously been reset and is in a
 * post-reset uninitialized state. Initializes multicast table,
 * and  Calls routines to setup link
 * Leaves the transmit and receive units disabled and uninitialized.
 */
static s32 atl1_init_hw(struct atl1_hw *hw)
{
        u32 ret_val = 0;

        /* Zero out the Multicast HASH table */
        iowrite32(0, hw->hw_addr + REG_RX_HASH_TABLE);
        /* clear the old settings from the multicast hash table */
        iowrite32(0, (hw->hw_addr + REG_RX_HASH_TABLE) + (1 << 2));

        atl1_init_flash_opcode(hw);

        if (!hw->phy_configured) {
                /* enable GPHY LinkChange Interrupt */
                ret_val = atl1_write_phy_reg(hw, 18, 0xC00);
                if (ret_val)
                        return ret_val;
                /* make PHY out of power-saving state */
                ret_val = atl1_phy_leave_power_saving(hw);
                if (ret_val)
                        return ret_val;
                /* Call a subroutine to configure the link */
                ret_val = atl1_setup_link(hw);
        }
        return ret_val;
}

/*
 * Detects the current speed and duplex settings of the hardware.
 * hw - Struct containing variables accessed by shared code
 * speed - Speed of the connection
 * duplex - Duplex setting of the connection
 */
static s32 atl1_get_speed_and_duplex(struct atl1_hw *hw, u16 *speed, u16 *duplex)
{
        struct pci_dev *pdev = hw->back->pdev;
        struct atl1_adapter *adapter = hw->back;
        s32 ret_val;
        u16 phy_data;

        /* ; --- Read   PHY Specific Status Register (17) */
        ret_val = atl1_read_phy_reg(hw, MII_ATLX_PSSR, &phy_data);
        if (ret_val)
                return ret_val;

        if (!(phy_data & MII_ATLX_PSSR_SPD_DPLX_RESOLVED))
                return ATLX_ERR_PHY_RES;

        switch (phy_data & MII_ATLX_PSSR_SPEED) {
        case MII_ATLX_PSSR_1000MBS:
                *speed = SPEED_1000;
                break;
        case MII_ATLX_PSSR_100MBS:
                *speed = SPEED_100;
                break;
        case MII_ATLX_PSSR_10MBS:
                *speed = SPEED_10;
                break;
        default:
                if (netif_msg_hw(adapter))
                        dev_dbg(&pdev->dev, "error getting speed\n");
                return ATLX_ERR_PHY_SPEED;
        }
        if (phy_data & MII_ATLX_PSSR_DPLX)
                *duplex = FULL_DUPLEX;
        else
                *duplex = HALF_DUPLEX;

        return 0;
}

static void atl1_set_mac_addr(struct atl1_hw *hw)
{
        u32 value;
        /*
         * 00-0B-6A-F6-00-DC
         * 0:  6AF600DC   1: 000B
         * low dword
         */
        value = (((u32) hw->mac_addr[2]) << 24) |
            (((u32) hw->mac_addr[3]) << 16) |
            (((u32) hw->mac_addr[4]) << 8) | (((u32) hw->mac_addr[5]));
        iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
        /* high dword */
        value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
        iowrite32(value, (hw->hw_addr + REG_MAC_STA_ADDR) + (1 << 2));
}

/**
 * atl1_sw_init - Initialize general software structures (struct atl1_adapter)
 * @adapter: board private structure to initialize
 *
 * atl1_sw_init initializes the Adapter private data structure.
 * Fields are initialized based on PCI device information and
 * OS network device settings (MTU size).
 */
static int atl1_sw_init(struct atl1_adapter *adapter)
{
        struct atl1_hw *hw = &adapter->hw;
        struct net_device *netdev = adapter->netdev;

        hw->max_frame_size = netdev->mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;
        hw->min_frame_size = ETH_ZLEN + ETH_FCS_LEN;

        adapter->wol = 0;
        device_set_wakeup_enable(&adapter->pdev->dev, false);
        adapter->rx_buffer_len = (hw->max_frame_size + 7) & ~7;
        adapter->ict = 50000;           /* 100ms */
        adapter->link_speed = SPEED_0;  /* hardware init */
        adapter->link_duplex = FULL_DUPLEX;

        hw->phy_configured = false;
        hw->preamble_len = 7;
        hw->ipgt = 0x60;
        hw->min_ifg = 0x50;
        hw->ipgr1 = 0x40;
        hw->ipgr2 = 0x60;
        hw->max_retry = 0xf;
        hw->lcol = 0x37;
        hw->jam_ipg = 7;
        hw->rfd_burst = 8;
        hw->rrd_burst = 8;
        hw->rfd_fetch_gap = 1;
        hw->rx_jumbo_th = adapter->rx_buffer_len / 8;
        hw->rx_jumbo_lkah = 1;
        hw->rrd_ret_timer = 16;
        hw->tpd_burst = 4;
        hw->tpd_fetch_th = 16;
        hw->txf_burst = 0x100;
        hw->tx_jumbo_task_th = (hw->max_frame_size + 7) >> 3;
        hw->tpd_fetch_gap = 1;
        hw->rcb_value = atl1_rcb_64;
        hw->dma_ord = atl1_dma_ord_enh;
        hw->dmar_block = atl1_dma_req_256;
        hw->dmaw_block = atl1_dma_req_256;
        hw->cmb_rrd = 4;
        hw->cmb_tpd = 4;
        hw->cmb_rx_timer = 1;   /* about 2us */
        hw->cmb_tx_timer = 1;   /* about 2us */
        hw->smb_timer = 100000; /* about 200ms */

        spin_lock_init(&adapter->lock);
        spin_lock_init(&adapter->mb_lock);

        return 0;
}

static int mdio_read(struct net_device *netdev, int phy_id, int reg_num)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        u16 result;

        atl1_read_phy_reg(&adapter->hw, reg_num & 0x1f, &result);

        return result;
}

static void mdio_write(struct net_device *netdev, int phy_id, int reg_num,
        int val)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);

        atl1_write_phy_reg(&adapter->hw, reg_num, val);
}

static int atl1_mii_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        unsigned long flags;
        int retval;

        if (!netif_running(netdev))
                return -EINVAL;

        spin_lock_irqsave(&adapter->lock, flags);
        retval = generic_mii_ioctl(&adapter->mii, if_mii(ifr), cmd, NULL);
        spin_unlock_irqrestore(&adapter->lock, flags);

        return retval;
}

/**
 * atl1_setup_ring_resources - allocate Tx / RX descriptor resources
 * @adapter: board private structure
 *
 * Return 0 on success, negative on failure
 */
static s32 atl1_setup_ring_resources(struct atl1_adapter *adapter)
{
        struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
        struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
        struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
        struct atl1_ring_header *ring_header = &adapter->ring_header;
        struct pci_dev *pdev = adapter->pdev;
        int size;
        u8 offset = 0;

        size = sizeof(struct atl1_buffer) * (tpd_ring->count + rfd_ring->count);
        tpd_ring->buffer_info = kzalloc(size, GFP_KERNEL);
        if (unlikely(!tpd_ring->buffer_info)) {
                if (netif_msg_drv(adapter))
                        dev_err(&pdev->dev, "kzalloc failed , size = D%d\n",
                                size);
                goto err_nomem;
        }
        rfd_ring->buffer_info =
                (tpd_ring->buffer_info + tpd_ring->count);

        /*
         * real ring DMA buffer
         * each ring/block may need up to 8 bytes for alignment, hence the
         * additional 40 bytes tacked onto the end.
         */
        ring_header->size =
                sizeof(struct tx_packet_desc) * tpd_ring->count
                + sizeof(struct rx_free_desc) * rfd_ring->count
                + sizeof(struct rx_return_desc) * rrd_ring->count
                + sizeof(struct coals_msg_block)
                + sizeof(struct stats_msg_block)
                + 40;

        ring_header->desc = dma_alloc_coherent(&pdev->dev, ring_header->size,
                                               &ring_header->dma, GFP_KERNEL);
        if (unlikely(!ring_header->desc)) {
                if (netif_msg_drv(adapter))
                        dev_err(&pdev->dev, "dma_alloc_coherent failed\n");
                goto err_nomem;
        }

        /* init TPD ring */
        tpd_ring->dma = ring_header->dma;
        offset = (tpd_ring->dma & 0x7) ? (8 - (ring_header->dma & 0x7)) : 0;
        tpd_ring->dma += offset;
        tpd_ring->desc = (u8 *) ring_header->desc + offset;
        tpd_ring->size = sizeof(struct tx_packet_desc) * tpd_ring->count;

        /* init RFD ring */
        rfd_ring->dma = tpd_ring->dma + tpd_ring->size;
        offset = (rfd_ring->dma & 0x7) ? (8 - (rfd_ring->dma & 0x7)) : 0;
        rfd_ring->dma += offset;
        rfd_ring->desc = (u8 *) tpd_ring->desc + (tpd_ring->size + offset);
        rfd_ring->size = sizeof(struct rx_free_desc) * rfd_ring->count;


        /* init RRD ring */
        rrd_ring->dma = rfd_ring->dma + rfd_ring->size;
        offset = (rrd_ring->dma & 0x7) ? (8 - (rrd_ring->dma & 0x7)) : 0;
        rrd_ring->dma += offset;
        rrd_ring->desc = (u8 *) rfd_ring->desc + (rfd_ring->size + offset);
        rrd_ring->size = sizeof(struct rx_return_desc) * rrd_ring->count;


        /* init CMB */
        adapter->cmb.dma = rrd_ring->dma + rrd_ring->size;
        offset = (adapter->cmb.dma & 0x7) ? (8 - (adapter->cmb.dma & 0x7)) : 0;
        adapter->cmb.dma += offset;
        adapter->cmb.cmb = (struct coals_msg_block *)
                ((u8 *) rrd_ring->desc + (rrd_ring->size + offset));

        /* init SMB */
        adapter->smb.dma = adapter->cmb.dma + sizeof(struct coals_msg_block);
        offset = (adapter->smb.dma & 0x7) ? (8 - (adapter->smb.dma & 0x7)) : 0;
        adapter->smb.dma += offset;
        adapter->smb.smb = (struct stats_msg_block *)
                ((u8 *) adapter->cmb.cmb +
                (sizeof(struct coals_msg_block) + offset));

        return 0;

err_nomem:
        kfree(tpd_ring->buffer_info);
        return -ENOMEM;
}

static void atl1_init_ring_ptrs(struct atl1_adapter *adapter)
{
        struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
        struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
        struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;

        atomic_set(&tpd_ring->next_to_use, 0);
        atomic_set(&tpd_ring->next_to_clean, 0);

        rfd_ring->next_to_clean = 0;
        atomic_set(&rfd_ring->next_to_use, 0);

        rrd_ring->next_to_use = 0;
        atomic_set(&rrd_ring->next_to_clean, 0);
}

/**
 * atl1_clean_rx_ring - Free RFD Buffers
 * @adapter: board private structure
 */
static void atl1_clean_rx_ring(struct atl1_adapter *adapter)
{
        struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
        struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
        struct atl1_buffer *buffer_info;
        struct pci_dev *pdev = adapter->pdev;
        unsigned long size;
        unsigned int i;

        /* Free all the Rx ring sk_buffs */
        for (i = 0; i < rfd_ring->count; i++) {
                buffer_info = &rfd_ring->buffer_info[i];
                if (buffer_info->dma) {
                        dma_unmap_page(&pdev->dev, buffer_info->dma,
                                       buffer_info->length, DMA_FROM_DEVICE);
                        buffer_info->dma = 0;
                }
                if (buffer_info->skb) {
                        dev_kfree_skb(buffer_info->skb);
                        buffer_info->skb = NULL;
                }
        }

        size = sizeof(struct atl1_buffer) * rfd_ring->count;
        memset(rfd_ring->buffer_info, 0, size);

        /* Zero out the descriptor ring */
        memset(rfd_ring->desc, 0, rfd_ring->size);

        rfd_ring->next_to_clean = 0;
        atomic_set(&rfd_ring->next_to_use, 0);

        rrd_ring->next_to_use = 0;
        atomic_set(&rrd_ring->next_to_clean, 0);
}

/**
 * atl1_clean_tx_ring - Free Tx Buffers
 * @adapter: board private structure
 */
static void atl1_clean_tx_ring(struct atl1_adapter *adapter)
{
        struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
        struct atl1_buffer *buffer_info;
        struct pci_dev *pdev = adapter->pdev;
        unsigned long size;
        unsigned int i;

        /* Free all the Tx ring sk_buffs */
        for (i = 0; i < tpd_ring->count; i++) {
                buffer_info = &tpd_ring->buffer_info[i];
                if (buffer_info->dma) {
                        dma_unmap_page(&pdev->dev, buffer_info->dma,
                                       buffer_info->length, DMA_TO_DEVICE);
                        buffer_info->dma = 0;
                }
        }

        for (i = 0; i < tpd_ring->count; i++) {
                buffer_info = &tpd_ring->buffer_info[i];
                if (buffer_info->skb) {
                        dev_kfree_skb_any(buffer_info->skb);
                        buffer_info->skb = NULL;
                }
        }

        size = sizeof(struct atl1_buffer) * tpd_ring->count;
        memset(tpd_ring->buffer_info, 0, size);

        /* Zero out the descriptor ring */
        memset(tpd_ring->desc, 0, tpd_ring->size);

        atomic_set(&tpd_ring->next_to_use, 0);
        atomic_set(&tpd_ring->next_to_clean, 0);
}

/**
 * atl1_free_ring_resources - Free Tx / RX descriptor Resources
 * @adapter: board private structure
 *
 * Free all transmit software resources
 */
static void atl1_free_ring_resources(struct atl1_adapter *adapter)
{
        struct pci_dev *pdev = adapter->pdev;
        struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
        struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
        struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
        struct atl1_ring_header *ring_header = &adapter->ring_header;

        atl1_clean_tx_ring(adapter);
        atl1_clean_rx_ring(adapter);

        kfree(tpd_ring->buffer_info);
        dma_free_coherent(&pdev->dev, ring_header->size, ring_header->desc,
                          ring_header->dma);

        tpd_ring->buffer_info = NULL;
        tpd_ring->desc = NULL;
        tpd_ring->dma = 0;

        rfd_ring->buffer_info = NULL;
        rfd_ring->desc = NULL;
        rfd_ring->dma = 0;

        rrd_ring->desc = NULL;
        rrd_ring->dma = 0;

        adapter->cmb.dma = 0;
        adapter->cmb.cmb = NULL;

        adapter->smb.dma = 0;
        adapter->smb.smb = NULL;
}

static void atl1_setup_mac_ctrl(struct atl1_adapter *adapter)
{
        u32 value;
        struct atl1_hw *hw = &adapter->hw;
        struct net_device *netdev = adapter->netdev;
        /* Config MAC CTRL Register */
        value = MAC_CTRL_TX_EN | MAC_CTRL_RX_EN;
        /* duplex */
        if (FULL_DUPLEX == adapter->link_duplex)
                value |= MAC_CTRL_DUPLX;
        /* speed */
        value |= ((u32) ((SPEED_1000 == adapter->link_speed) ?
                         MAC_CTRL_SPEED_1000 : MAC_CTRL_SPEED_10_100) <<
                  MAC_CTRL_SPEED_SHIFT);
        /* flow control */
        value |= (MAC_CTRL_TX_FLOW | MAC_CTRL_RX_FLOW);
        /* PAD & CRC */
        value |= (MAC_CTRL_ADD_CRC | MAC_CTRL_PAD);
        /* preamble length */
        value |= (((u32) adapter->hw.preamble_len
                   & MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
        /* vlan */
        __atlx_vlan_mode(netdev->features, &value);
        /* rx checksum
           if (adapter->rx_csum)
           value |= MAC_CTRL_RX_CHKSUM_EN;
         */
        /* filter mode */
        value |= MAC_CTRL_BC_EN;
        if (netdev->flags & IFF_PROMISC)
                value |= MAC_CTRL_PROMIS_EN;
        else if (netdev->flags & IFF_ALLMULTI)
                value |= MAC_CTRL_MC_ALL_EN;
        /* value |= MAC_CTRL_LOOPBACK; */
        iowrite32(value, hw->hw_addr + REG_MAC_CTRL);
}

static u32 atl1_check_link(struct atl1_adapter *adapter)
{
        struct atl1_hw *hw = &adapter->hw;
        struct net_device *netdev = adapter->netdev;
        u32 ret_val;
        u16 speed, duplex, phy_data;
        int reconfig = 0;

        /* MII_BMSR must read twice */
        atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
        atl1_read_phy_reg(hw, MII_BMSR, &phy_data);
        if (!(phy_data & BMSR_LSTATUS)) {
                /* link down */
                if (netif_carrier_ok(netdev)) {
                        /* old link state: Up */
                        if (netif_msg_link(adapter))
                                dev_info(&adapter->pdev->dev, "link is down\n");
                        adapter->link_speed = SPEED_0;
                        netif_carrier_off(netdev);
                }
                return 0;
        }

        /* Link Up */
        ret_val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
        if (ret_val)
                return ret_val;

        switch (hw->media_type) {
        case MEDIA_TYPE_1000M_FULL:
                if (speed != SPEED_1000 || duplex != FULL_DUPLEX)
                        reconfig = 1;
                break;
        case MEDIA_TYPE_100M_FULL:
                if (speed != SPEED_100 || duplex != FULL_DUPLEX)
                        reconfig = 1;
                break;
        case MEDIA_TYPE_100M_HALF:
                if (speed != SPEED_100 || duplex != HALF_DUPLEX)
                        reconfig = 1;
                break;
        case MEDIA_TYPE_10M_FULL:
                if (speed != SPEED_10 || duplex != FULL_DUPLEX)
                        reconfig = 1;
                break;
        case MEDIA_TYPE_10M_HALF:
                if (speed != SPEED_10 || duplex != HALF_DUPLEX)
                        reconfig = 1;
                break;
        }

        /* link result is our setting */
        if (!reconfig) {
                if (adapter->link_speed != speed ||
                    adapter->link_duplex != duplex) {
                        adapter->link_speed = speed;
                        adapter->link_duplex = duplex;
                        atl1_setup_mac_ctrl(adapter);
                        if (netif_msg_link(adapter))
                                dev_info(&adapter->pdev->dev,
                                        "%s link is up %d Mbps %s\n",
                                        netdev->name, adapter->link_speed,
                                        adapter->link_duplex == FULL_DUPLEX ?
                                        "full duplex" : "half duplex");
                }
                if (!netif_carrier_ok(netdev)) {
                        /* Link down -> Up */
                        netif_carrier_on(netdev);
                }
                return 0;
        }

        /* change original link status */
        if (netif_carrier_ok(netdev)) {
                adapter->link_speed = SPEED_0;
                netif_carrier_off(netdev);
                netif_stop_queue(netdev);
        }

        if (hw->media_type != MEDIA_TYPE_AUTO_SENSOR &&
            hw->media_type != MEDIA_TYPE_1000M_FULL) {
                switch (hw->media_type) {
                case MEDIA_TYPE_100M_FULL:
                        phy_data = MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
                                   MII_CR_RESET;
                        break;
                case MEDIA_TYPE_100M_HALF:
                        phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
                        break;
                case MEDIA_TYPE_10M_FULL:
                        phy_data =
                            MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
                        break;
                default:
                        /* MEDIA_TYPE_10M_HALF: */
                        phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
                        break;
                }
                atl1_write_phy_reg(hw, MII_BMCR, phy_data);
                return 0;
        }

        /* auto-neg, insert timer to re-config phy */
        if (!adapter->phy_timer_pending) {
                adapter->phy_timer_pending = true;
                mod_timer(&adapter->phy_config_timer,
                          round_jiffies(jiffies + 3 * HZ));
        }

        return 0;
}

static void set_flow_ctrl_old(struct atl1_adapter *adapter)
{
        u32 hi, lo, value;

        /* RFD Flow Control */
        value = adapter->rfd_ring.count;
        hi = value / 16;
        if (hi < 2)
                hi = 2;
        lo = value * 7 / 8;

        value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) |
                ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT);
        iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RXF_PAUSE_THRESH);

        /* RRD Flow Control */
        value = adapter->rrd_ring.count;
        lo = value / 16;
        hi = value * 7 / 8;
        if (lo < 2)
                lo = 2;
        value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) |
                ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT);
        iowrite32(value, adapter->hw.hw_addr + REG_RXQ_RRD_PAUSE_THRESH);
}

static void set_flow_ctrl_new(struct atl1_hw *hw)
{
        u32 hi, lo, value;

        /* RXF Flow Control */
        value = ioread32(hw->hw_addr + REG_SRAM_RXF_LEN);
        lo = value / 16;
        if (lo < 192)
                lo = 192;
        hi = value * 7 / 8;
        if (hi < lo)
                hi = lo + 16;
        value = ((hi & RXQ_RXF_PAUSE_TH_HI_MASK) << RXQ_RXF_PAUSE_TH_HI_SHIFT) |
                ((lo & RXQ_RXF_PAUSE_TH_LO_MASK) << RXQ_RXF_PAUSE_TH_LO_SHIFT);
        iowrite32(value, hw->hw_addr + REG_RXQ_RXF_PAUSE_THRESH);

        /* RRD Flow Control */
        value = ioread32(hw->hw_addr + REG_SRAM_RRD_LEN);
        lo = value / 8;
        hi = value * 7 / 8;
        if (lo < 2)
                lo = 2;
        if (hi < lo)
                hi = lo + 3;
        value = ((hi & RXQ_RRD_PAUSE_TH_HI_MASK) << RXQ_RRD_PAUSE_TH_HI_SHIFT) |
                ((lo & RXQ_RRD_PAUSE_TH_LO_MASK) << RXQ_RRD_PAUSE_TH_LO_SHIFT);
        iowrite32(value, hw->hw_addr + REG_RXQ_RRD_PAUSE_THRESH);
}

/**
 * atl1_configure - Configure Transmit&Receive Unit after Reset
 * @adapter: board private structure
 *
 * Configure the Tx /Rx unit of the MAC after a reset.
 */
static u32 atl1_configure(struct atl1_adapter *adapter)
{
        struct atl1_hw *hw = &adapter->hw;
        u32 value;

        /* clear interrupt status */
        iowrite32(0xffffffff, adapter->hw.hw_addr + REG_ISR);

        /* set MAC Address */
        value = (((u32) hw->mac_addr[2]) << 24) |
                (((u32) hw->mac_addr[3]) << 16) |
                (((u32) hw->mac_addr[4]) << 8) |
                (((u32) hw->mac_addr[5]));
        iowrite32(value, hw->hw_addr + REG_MAC_STA_ADDR);
        value = (((u32) hw->mac_addr[0]) << 8) | (((u32) hw->mac_addr[1]));
        iowrite32(value, hw->hw_addr + (REG_MAC_STA_ADDR + 4));

        /* tx / rx ring */

        /* HI base address */
        iowrite32((u32) ((adapter->tpd_ring.dma & 0xffffffff00000000ULL) >> 32),
                hw->hw_addr + REG_DESC_BASE_ADDR_HI);
        /* LO base address */
        iowrite32((u32) (adapter->rfd_ring.dma & 0x00000000ffffffffULL),
                hw->hw_addr + REG_DESC_RFD_ADDR_LO);
        iowrite32((u32) (adapter->rrd_ring.dma & 0x00000000ffffffffULL),
                hw->hw_addr + REG_DESC_RRD_ADDR_LO);
        iowrite32((u32) (adapter->tpd_ring.dma & 0x00000000ffffffffULL),
                hw->hw_addr + REG_DESC_TPD_ADDR_LO);
        iowrite32((u32) (adapter->cmb.dma & 0x00000000ffffffffULL),
                hw->hw_addr + REG_DESC_CMB_ADDR_LO);
        iowrite32((u32) (adapter->smb.dma & 0x00000000ffffffffULL),
                hw->hw_addr + REG_DESC_SMB_ADDR_LO);

        /* element count */
        value = adapter->rrd_ring.count;
        value <<= 16;
        value += adapter->rfd_ring.count;
        iowrite32(value, hw->hw_addr + REG_DESC_RFD_RRD_RING_SIZE);
        iowrite32(adapter->tpd_ring.count, hw->hw_addr +
                REG_DESC_TPD_RING_SIZE);

        /* Load Ptr */
        iowrite32(1, hw->hw_addr + REG_LOAD_PTR);

        /* config Mailbox */
        value = ((atomic_read(&adapter->tpd_ring.next_to_use)
                  & MB_TPD_PROD_INDX_MASK) << MB_TPD_PROD_INDX_SHIFT) |
                ((atomic_read(&adapter->rrd_ring.next_to_clean)
                & MB_RRD_CONS_INDX_MASK) << MB_RRD_CONS_INDX_SHIFT) |
                ((atomic_read(&adapter->rfd_ring.next_to_use)
                & MB_RFD_PROD_INDX_MASK) << MB_RFD_PROD_INDX_SHIFT);
        iowrite32(value, hw->hw_addr + REG_MAILBOX);

        /* config IPG/IFG */
        value = (((u32) hw->ipgt & MAC_IPG_IFG_IPGT_MASK)
                 << MAC_IPG_IFG_IPGT_SHIFT) |
                (((u32) hw->min_ifg & MAC_IPG_IFG_MIFG_MASK)
                << MAC_IPG_IFG_MIFG_SHIFT) |
                (((u32) hw->ipgr1 & MAC_IPG_IFG_IPGR1_MASK)
                << MAC_IPG_IFG_IPGR1_SHIFT) |
                (((u32) hw->ipgr2 & MAC_IPG_IFG_IPGR2_MASK)
                << MAC_IPG_IFG_IPGR2_SHIFT);
        iowrite32(value, hw->hw_addr + REG_MAC_IPG_IFG);

        /* config  Half-Duplex Control */
        value = ((u32) hw->lcol & MAC_HALF_DUPLX_CTRL_LCOL_MASK) |
                (((u32) hw->max_retry & MAC_HALF_DUPLX_CTRL_RETRY_MASK)
                << MAC_HALF_DUPLX_CTRL_RETRY_SHIFT) |
                MAC_HALF_DUPLX_CTRL_EXC_DEF_EN |
                (0xa << MAC_HALF_DUPLX_CTRL_ABEBT_SHIFT) |
                (((u32) hw->jam_ipg & MAC_HALF_DUPLX_CTRL_JAMIPG_MASK)
                << MAC_HALF_DUPLX_CTRL_JAMIPG_SHIFT);
        iowrite32(value, hw->hw_addr + REG_MAC_HALF_DUPLX_CTRL);

        /* set Interrupt Moderator Timer */
        iowrite16(adapter->imt, hw->hw_addr + REG_IRQ_MODU_TIMER_INIT);
        iowrite32(MASTER_CTRL_ITIMER_EN, hw->hw_addr + REG_MASTER_CTRL);

        /* set Interrupt Clear Timer */
        iowrite16(adapter->ict, hw->hw_addr + REG_CMBDISDMA_TIMER);

        /* set max frame size hw will accept */
        iowrite32(hw->max_frame_size, hw->hw_addr + REG_MTU);

        /* jumbo size & rrd retirement timer */
        value = (((u32) hw->rx_jumbo_th & RXQ_JMBOSZ_TH_MASK)
                 << RXQ_JMBOSZ_TH_SHIFT) |
                (((u32) hw->rx_jumbo_lkah & RXQ_JMBO_LKAH_MASK)
                << RXQ_JMBO_LKAH_SHIFT) |
                (((u32) hw->rrd_ret_timer & RXQ_RRD_TIMER_MASK)
                << RXQ_RRD_TIMER_SHIFT);
        iowrite32(value, hw->hw_addr + REG_RXQ_JMBOSZ_RRDTIM);

        /* Flow Control */
        switch (hw->dev_rev) {
        case 0x8001:
        case 0x9001:
        case 0x9002:
        case 0x9003:
                set_flow_ctrl_old(adapter);
                break;
        default:
                set_flow_ctrl_new(hw);
                break;
        }

        /* config TXQ */
        value = (((u32) hw->tpd_burst & TXQ_CTRL_TPD_BURST_NUM_MASK)
                 << TXQ_CTRL_TPD_BURST_NUM_SHIFT) |
                (((u32) hw->txf_burst & TXQ_CTRL_TXF_BURST_NUM_MASK)
                << TXQ_CTRL_TXF_BURST_NUM_SHIFT) |
                (((u32) hw->tpd_fetch_th & TXQ_CTRL_TPD_FETCH_TH_MASK)
                << TXQ_CTRL_TPD_FETCH_TH_SHIFT) | TXQ_CTRL_ENH_MODE |
                TXQ_CTRL_EN;
        iowrite32(value, hw->hw_addr + REG_TXQ_CTRL);

        /* min tpd fetch gap & tx jumbo packet size threshold for taskoffload */
        value = (((u32) hw->tx_jumbo_task_th & TX_JUMBO_TASK_TH_MASK)
                << TX_JUMBO_TASK_TH_SHIFT) |
                (((u32) hw->tpd_fetch_gap & TX_TPD_MIN_IPG_MASK)
                << TX_TPD_MIN_IPG_SHIFT);
        iowrite32(value, hw->hw_addr + REG_TX_JUMBO_TASK_TH_TPD_IPG);

        /* config RXQ */
        value = (((u32) hw->rfd_burst & RXQ_CTRL_RFD_BURST_NUM_MASK)
                << RXQ_CTRL_RFD_BURST_NUM_SHIFT) |
                (((u32) hw->rrd_burst & RXQ_CTRL_RRD_BURST_THRESH_MASK)
                << RXQ_CTRL_RRD_BURST_THRESH_SHIFT) |
                (((u32) hw->rfd_fetch_gap & RXQ_CTRL_RFD_PREF_MIN_IPG_MASK)
                << RXQ_CTRL_RFD_PREF_MIN_IPG_SHIFT) | RXQ_CTRL_CUT_THRU_EN |
                RXQ_CTRL_EN;
        iowrite32(value, hw->hw_addr + REG_RXQ_CTRL);

        /* config DMA Engine */
        value = ((((u32) hw->dmar_block) & DMA_CTRL_DMAR_BURST_LEN_MASK)
                << DMA_CTRL_DMAR_BURST_LEN_SHIFT) |
                ((((u32) hw->dmaw_block) & DMA_CTRL_DMAW_BURST_LEN_MASK)
                << DMA_CTRL_DMAW_BURST_LEN_SHIFT) | DMA_CTRL_DMAR_EN |
                DMA_CTRL_DMAW_EN;
        value |= (u32) hw->dma_ord;
        if (atl1_rcb_128 == hw->rcb_value)
                value |= DMA_CTRL_RCB_VALUE;
        iowrite32(value, hw->hw_addr + REG_DMA_CTRL);

        /* config CMB / SMB */
        value = (hw->cmb_tpd > adapter->tpd_ring.count) ?
                hw->cmb_tpd : adapter->tpd_ring.count;
        value <<= 16;
        value |= hw->cmb_rrd;
        iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TH);
        value = hw->cmb_rx_timer | ((u32) hw->cmb_tx_timer << 16);
        iowrite32(value, hw->hw_addr + REG_CMB_WRITE_TIMER);
        iowrite32(hw->smb_timer, hw->hw_addr + REG_SMB_TIMER);

        /* --- enable CMB / SMB */
        value = CSMB_CTRL_CMB_EN | CSMB_CTRL_SMB_EN;
        iowrite32(value, hw->hw_addr + REG_CSMB_CTRL);

        value = ioread32(adapter->hw.hw_addr + REG_ISR);
        if (unlikely((value & ISR_PHY_LINKDOWN) != 0))
                value = 1;      /* config failed */
        else
                value = 0;

        /* clear all interrupt status */
        iowrite32(0x3fffffff, adapter->hw.hw_addr + REG_ISR);
        iowrite32(0, adapter->hw.hw_addr + REG_ISR);
        return value;
}

/*
 * atl1_pcie_patch - Patch for PCIE module
 */
static void atl1_pcie_patch(struct atl1_adapter *adapter)
{
        u32 value;

        /* much vendor magic here */
        value = 0x6500;
        iowrite32(value, adapter->hw.hw_addr + 0x12FC);
        /* pcie flow control mode change */
        value = ioread32(adapter->hw.hw_addr + 0x1008);
        value |= 0x8000;
        iowrite32(value, adapter->hw.hw_addr + 0x1008);
}

/*
 * When ACPI resume on some VIA MotherBoard, the Interrupt Disable bit/0x400
 * on PCI Command register is disable.
 * The function enable this bit.
 * Brackett, 2006/03/15
 */
static void atl1_via_workaround(struct atl1_adapter *adapter)
{
        unsigned long value;

        value = ioread16(adapter->hw.hw_addr + PCI_COMMAND);
        if (value & PCI_COMMAND_INTX_DISABLE)
                value &= ~PCI_COMMAND_INTX_DISABLE;
        iowrite32(value, adapter->hw.hw_addr + PCI_COMMAND);
}

static void atl1_inc_smb(struct atl1_adapter *adapter)
{
        struct net_device *netdev = adapter->netdev;
        struct stats_msg_block *smb = adapter->smb.smb;

        u64 new_rx_errors = smb->rx_frag +
                            smb->rx_fcs_err +
                            smb->rx_len_err +
                            smb->rx_sz_ov +
                            smb->rx_rxf_ov +
                            smb->rx_rrd_ov +
                            smb->rx_align_err;
        u64 new_tx_errors = smb->tx_late_col +
                            smb->tx_abort_col +
                            smb->tx_underrun +
                            smb->tx_trunc;

        /* Fill out the OS statistics structure */
        adapter->soft_stats.rx_packets += smb->rx_ok + new_rx_errors;
        adapter->soft_stats.tx_packets += smb->tx_ok + new_tx_errors;
        adapter->soft_stats.rx_bytes += smb->rx_byte_cnt;
        adapter->soft_stats.tx_bytes += smb->tx_byte_cnt;
        adapter->soft_stats.multicast += smb->rx_mcast;
        adapter->soft_stats.collisions += smb->tx_1_col +
                                          smb->tx_2_col +
                                          smb->tx_late_col +
                                          smb->tx_abort_col;

        /* Rx Errors */
        adapter->soft_stats.rx_errors += new_rx_errors;
        adapter->soft_stats.rx_fifo_errors += smb->rx_rxf_ov;
        adapter->soft_stats.rx_length_errors += smb->rx_len_err;
        adapter->soft_stats.rx_crc_errors += smb->rx_fcs_err;
        adapter->soft_stats.rx_frame_errors += smb->rx_align_err;

        adapter->soft_stats.rx_pause += smb->rx_pause;
        adapter->soft_stats.rx_rrd_ov += smb->rx_rrd_ov;
        adapter->soft_stats.rx_trunc += smb->rx_sz_ov;

        /* Tx Errors */
        adapter->soft_stats.tx_errors += new_tx_errors;
        adapter->soft_stats.tx_fifo_errors += smb->tx_underrun;
        adapter->soft_stats.tx_aborted_errors += smb->tx_abort_col;
        adapter->soft_stats.tx_window_errors += smb->tx_late_col;

        adapter->soft_stats.excecol += smb->tx_abort_col;
        adapter->soft_stats.deffer += smb->tx_defer;
        adapter->soft_stats.scc += smb->tx_1_col;
        adapter->soft_stats.mcc += smb->tx_2_col;
        adapter->soft_stats.latecol += smb->tx_late_col;
        adapter->soft_stats.tx_underrun += smb->tx_underrun;
        adapter->soft_stats.tx_trunc += smb->tx_trunc;
        adapter->soft_stats.tx_pause += smb->tx_pause;

        netdev->stats.rx_bytes = adapter->soft_stats.rx_bytes;
        netdev->stats.tx_bytes = adapter->soft_stats.tx_bytes;
        netdev->stats.multicast = adapter->soft_stats.multicast;
        netdev->stats.collisions = adapter->soft_stats.collisions;
        netdev->stats.rx_errors = adapter->soft_stats.rx_errors;
        netdev->stats.rx_length_errors =
                adapter->soft_stats.rx_length_errors;
        netdev->stats.rx_crc_errors = adapter->soft_stats.rx_crc_errors;
        netdev->stats.rx_frame_errors =
                adapter->soft_stats.rx_frame_errors;
        netdev->stats.rx_fifo_errors = adapter->soft_stats.rx_fifo_errors;
        netdev->stats.rx_dropped = adapter->soft_stats.rx_rrd_ov;
        netdev->stats.tx_errors = adapter->soft_stats.tx_errors;
        netdev->stats.tx_fifo_errors = adapter->soft_stats.tx_fifo_errors;
        netdev->stats.tx_aborted_errors =
                adapter->soft_stats.tx_aborted_errors;
        netdev->stats.tx_window_errors =
                adapter->soft_stats.tx_window_errors;
        netdev->stats.tx_carrier_errors =
                adapter->soft_stats.tx_carrier_errors;

        netdev->stats.rx_packets = adapter->soft_stats.rx_packets;
        netdev->stats.tx_packets = adapter->soft_stats.tx_packets;
}

static void atl1_update_mailbox(struct atl1_adapter *adapter)
{
        unsigned long flags;
        u32 tpd_next_to_use;
        u32 rfd_next_to_use;
        u32 rrd_next_to_clean;
        u32 value;

        spin_lock_irqsave(&adapter->mb_lock, flags);

        tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use);
        rfd_next_to_use = atomic_read(&adapter->rfd_ring.next_to_use);
        rrd_next_to_clean = atomic_read(&adapter->rrd_ring.next_to_clean);

        value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) <<
                MB_RFD_PROD_INDX_SHIFT) |
                ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) <<
                MB_RRD_CONS_INDX_SHIFT) |
                ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) <<
                MB_TPD_PROD_INDX_SHIFT);
        iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX);

        spin_unlock_irqrestore(&adapter->mb_lock, flags);
}

static void atl1_clean_alloc_flag(struct atl1_adapter *adapter,
        struct rx_return_desc *rrd, u16 offset)
{
        struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;

        while (rfd_ring->next_to_clean != (rrd->buf_indx + offset)) {
                rfd_ring->buffer_info[rfd_ring->next_to_clean].alloced = 0;
                if (++rfd_ring->next_to_clean == rfd_ring->count) {
                        rfd_ring->next_to_clean = 0;
                }
        }
}

static void atl1_update_rfd_index(struct atl1_adapter *adapter,
        struct rx_return_desc *rrd)
{
        u16 num_buf;

        num_buf = (rrd->xsz.xsum_sz.pkt_size + adapter->rx_buffer_len - 1) /
                adapter->rx_buffer_len;
        if (rrd->num_buf == num_buf)
                /* clean alloc flag for bad rrd */
                atl1_clean_alloc_flag(adapter, rrd, num_buf);
}

static void atl1_rx_checksum(struct atl1_adapter *adapter,
        struct rx_return_desc *rrd, struct sk_buff *skb)
{
        struct pci_dev *pdev = adapter->pdev;

        /*
         * The L1 hardware contains a bug that erroneously sets the
         * PACKET_FLAG_ERR and ERR_FLAG_L4_CHKSUM bits whenever a
         * fragmented IP packet is received, even though the packet
         * is perfectly valid and its checksum is correct. There's
         * no way to distinguish between one of these good packets
         * and a packet that actually contains a TCP/UDP checksum
         * error, so all we can do is allow it to be handed up to
         * the higher layers and let it be sorted out there.
         */

        skb_checksum_none_assert(skb);

        if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
                if (rrd->err_flg & (ERR_FLAG_CRC | ERR_FLAG_TRUNC |
                                        ERR_FLAG_CODE | ERR_FLAG_OV)) {
                        adapter->hw_csum_err++;
                        if (netif_msg_rx_err(adapter))
                                dev_printk(KERN_DEBUG, &pdev->dev,
                                        "rx checksum error\n");
                        return;
                }
        }

        /* not IPv4 */
        if (!(rrd->pkt_flg & PACKET_FLAG_IPV4))
                /* checksum is invalid, but it's not an IPv4 pkt, so ok */
                return;

        /* IPv4 packet */
        if (likely(!(rrd->err_flg &
                (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM)))) {
                skb->ip_summed = CHECKSUM_UNNECESSARY;
                adapter->hw_csum_good++;
                return;
        }
}

/**
 * atl1_alloc_rx_buffers - Replace used receive buffers
 * @adapter: address of board private structure
 */
static u16 atl1_alloc_rx_buffers(struct atl1_adapter *adapter)
{
        struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
        struct pci_dev *pdev = adapter->pdev;
        struct page *page;
        unsigned long offset;
        struct atl1_buffer *buffer_info, *next_info;
        struct sk_buff *skb;
        u16 num_alloc = 0;
        u16 rfd_next_to_use, next_next;
        struct rx_free_desc *rfd_desc;

        next_next = rfd_next_to_use = atomic_read(&rfd_ring->next_to_use);
        if (++next_next == rfd_ring->count)
                next_next = 0;
        buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
        next_info = &rfd_ring->buffer_info[next_next];

        while (!buffer_info->alloced && !next_info->alloced) {
                if (buffer_info->skb) {
                        buffer_info->alloced = 1;
                        goto next;
                }

                rfd_desc = ATL1_RFD_DESC(rfd_ring, rfd_next_to_use);

                skb = netdev_alloc_skb_ip_align(adapter->netdev,
                                                adapter->rx_buffer_len);
                if (unlikely(!skb)) {
                        /* Better luck next round */
                        adapter->soft_stats.rx_dropped++;
                        break;
                }

                page = virt_to_page(skb->data);
                offset = offset_in_page(skb->data);
                buffer_info->dma = dma_map_page(&pdev->dev, page, offset,
                                                adapter->rx_buffer_len,
                                                DMA_FROM_DEVICE);
                if (dma_mapping_error(&pdev->dev, buffer_info->dma)) {
                        kfree_skb(skb);
                        adapter->soft_stats.rx_dropped++;
                        break;
                }

                buffer_info->alloced = 1;
                buffer_info->skb = skb;
                buffer_info->length = (u16)adapter->rx_buffer_len;

                rfd_desc->buffer_addr = cpu_to_le64(buffer_info->dma);
                rfd_desc->buf_len = cpu_to_le16(adapter->rx_buffer_len);
                rfd_desc->coalese = 0;

next:
                rfd_next_to_use = next_next;
                if (unlikely(++next_next == rfd_ring->count))
                        next_next = 0;

                buffer_info = &rfd_ring->buffer_info[rfd_next_to_use];
                next_info = &rfd_ring->buffer_info[next_next];
                num_alloc++;
        }

        if (num_alloc) {
                /*
                 * Force memory writes to complete before letting h/w
                 * know there are new descriptors to fetch.  (Only
                 * applicable for weak-ordered memory model archs,
                 * such as IA-64).
                 */
                wmb();
                atomic_set(&rfd_ring->next_to_use, (int)rfd_next_to_use);
        }
        return num_alloc;
}

static int atl1_intr_rx(struct atl1_adapter *adapter, int budget)
{
        int i, count;
        u16 length;
        u16 rrd_next_to_clean;
        u32 value;
        struct atl1_rfd_ring *rfd_ring = &adapter->rfd_ring;
        struct atl1_rrd_ring *rrd_ring = &adapter->rrd_ring;
        struct atl1_buffer *buffer_info;
        struct rx_return_desc *rrd;
        struct sk_buff *skb;

        count = 0;

        rrd_next_to_clean = atomic_read(&rrd_ring->next_to_clean);

        while (count < budget) {
                rrd = ATL1_RRD_DESC(rrd_ring, rrd_next_to_clean);
                i = 1;
                if (likely(rrd->xsz.valid)) {   /* packet valid */
chk_rrd:
                        /* check rrd status */
                        if (likely(rrd->num_buf == 1))
                                goto rrd_ok;
                        else if (netif_msg_rx_err(adapter)) {
                                dev_printk(KERN_DEBUG, &adapter->pdev->dev,
                                        "unexpected RRD buffer count\n");
                                dev_printk(KERN_DEBUG, &adapter->pdev->dev,
                                        "rx_buf_len = %d\n",
                                        adapter->rx_buffer_len);
                                dev_printk(KERN_DEBUG, &adapter->pdev->dev,
                                        "RRD num_buf = %d\n",
                                        rrd->num_buf);
                                dev_printk(KERN_DEBUG, &adapter->pdev->dev,
                                        "RRD pkt_len = %d\n",
                                        rrd->xsz.xsum_sz.pkt_size);
                                dev_printk(KERN_DEBUG, &adapter->pdev->dev,
                                        "RRD pkt_flg = 0x%08X\n",
                                        rrd->pkt_flg);
                                dev_printk(KERN_DEBUG, &adapter->pdev->dev,
                                        "RRD err_flg = 0x%08X\n",
                                        rrd->err_flg);
                                dev_printk(KERN_DEBUG, &adapter->pdev->dev,
                                        "RRD vlan_tag = 0x%08X\n",
                                        rrd->vlan_tag);
                        }

                        /* rrd seems to be bad */
                        if (unlikely(i-- > 0)) {
                                /* rrd may not be DMAed completely */
                                udelay(1);
                                goto chk_rrd;
                        }
                        /* bad rrd */
                        if (netif_msg_rx_err(adapter))
                                dev_printk(KERN_DEBUG, &adapter->pdev->dev,
                                        "bad RRD\n");
                        /* see if update RFD index */
                        if (rrd->num_buf > 1)
                                atl1_update_rfd_index(adapter, rrd);

                        /* update rrd */
                        rrd->xsz.valid = 0;
                        if (++rrd_next_to_clean == rrd_ring->count)
                                rrd_next_to_clean = 0;
                        count++;
                        continue;
                } else {        /* current rrd still not be updated */

                        break;
                }
rrd_ok:
                /* clean alloc flag for bad rrd */
                atl1_clean_alloc_flag(adapter, rrd, 0);

                buffer_info = &rfd_ring->buffer_info[rrd->buf_indx];
                if (++rfd_ring->next_to_clean == rfd_ring->count)
                        rfd_ring->next_to_clean = 0;

                /* update rrd next to clean */
                if (++rrd_next_to_clean == rrd_ring->count)
                        rrd_next_to_clean = 0;
                count++;

                if (unlikely(rrd->pkt_flg & PACKET_FLAG_ERR)) {
                        if (!(rrd->err_flg &
                                (ERR_FLAG_IP_CHKSUM | ERR_FLAG_L4_CHKSUM
                                | ERR_FLAG_LEN))) {
                                /* packet error, don't need upstream */
                                buffer_info->alloced = 0;
                                rrd->xsz.valid = 0;
                                continue;
                        }
                }

                /* Good Receive */
                dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
                               buffer_info->length, DMA_FROM_DEVICE);
                buffer_info->dma = 0;
                skb = buffer_info->skb;
                length = le16_to_cpu(rrd->xsz.xsum_sz.pkt_size);

                skb_put(skb, length - ETH_FCS_LEN);

                /* Receive Checksum Offload */
                atl1_rx_checksum(adapter, rrd, skb);
                skb->protocol = eth_type_trans(skb, adapter->netdev);

                if (rrd->pkt_flg & PACKET_FLAG_VLAN_INS) {
                        u16 vlan_tag = (rrd->vlan_tag >> 4) |
                                        ((rrd->vlan_tag & 7) << 13) |
                                        ((rrd->vlan_tag & 8) << 9);

                        __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
                }
                netif_receive_skb(skb);

                /* let protocol layer free skb */
                buffer_info->skb = NULL;
                buffer_info->alloced = 0;
                rrd->xsz.valid = 0;
        }

        atomic_set(&rrd_ring->next_to_clean, rrd_next_to_clean);

        atl1_alloc_rx_buffers(adapter);

        /* update mailbox ? */
        if (count) {
                u32 tpd_next_to_use;
                u32 rfd_next_to_use;

                spin_lock(&adapter->mb_lock);

                tpd_next_to_use = atomic_read(&adapter->tpd_ring.next_to_use);
                rfd_next_to_use =
                    atomic_read(&adapter->rfd_ring.next_to_use);
                rrd_next_to_clean =
                    atomic_read(&adapter->rrd_ring.next_to_clean);
                value = ((rfd_next_to_use & MB_RFD_PROD_INDX_MASK) <<
                        MB_RFD_PROD_INDX_SHIFT) |
                        ((rrd_next_to_clean & MB_RRD_CONS_INDX_MASK) <<
                        MB_RRD_CONS_INDX_SHIFT) |
                        ((tpd_next_to_use & MB_TPD_PROD_INDX_MASK) <<
                        MB_TPD_PROD_INDX_SHIFT);
                iowrite32(value, adapter->hw.hw_addr + REG_MAILBOX);
                spin_unlock(&adapter->mb_lock);
        }

        return count;
}

static int atl1_intr_tx(struct atl1_adapter *adapter)
{
        struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
        struct atl1_buffer *buffer_info;
        u16 sw_tpd_next_to_clean;
        u16 cmb_tpd_next_to_clean;
        int count = 0;

        sw_tpd_next_to_clean = atomic_read(&tpd_ring->next_to_clean);
        cmb_tpd_next_to_clean = le16_to_cpu(adapter->cmb.cmb->tpd_cons_idx);

        while (cmb_tpd_next_to_clean != sw_tpd_next_to_clean) {
                buffer_info = &tpd_ring->buffer_info[sw_tpd_next_to_clean];
                if (buffer_info->dma) {
                        dma_unmap_page(&adapter->pdev->dev, buffer_info->dma,
                                       buffer_info->length, DMA_TO_DEVICE);
                        buffer_info->dma = 0;
                }

                if (buffer_info->skb) {
                        dev_consume_skb_irq(buffer_info->skb);
                        buffer_info->skb = NULL;
                }

                if (++sw_tpd_next_to_clean == tpd_ring->count)
                        sw_tpd_next_to_clean = 0;

                count++;
        }
        atomic_set(&tpd_ring->next_to_clean, sw_tpd_next_to_clean);

        if (netif_queue_stopped(adapter->netdev) &&
            netif_carrier_ok(adapter->netdev))
                netif_wake_queue(adapter->netdev);

        return count;
}

static u16 atl1_tpd_avail(struct atl1_tpd_ring *tpd_ring)
{
        u16 next_to_clean = atomic_read(&tpd_ring->next_to_clean);
        u16 next_to_use = atomic_read(&tpd_ring->next_to_use);
        return (next_to_clean > next_to_use) ?
                next_to_clean - next_to_use - 1 :
                tpd_ring->count + next_to_clean - next_to_use - 1;
}

static int atl1_tso(struct atl1_adapter *adapter, struct sk_buff *skb,
                    struct tx_packet_desc *ptpd)
{
        u8 hdr_len, ip_off;
        u32 real_len;

        if (skb_shinfo(skb)->gso_size) {
                int err;

                err = skb_cow_head(skb, 0);
                if (err < 0)
                        return err;

                if (skb->protocol == htons(ETH_P_IP)) {
                        struct iphdr *iph = ip_hdr(skb);

                        real_len = (((unsigned char *)iph - skb->data) +
                                ntohs(iph->tot_len));
                        if (real_len < skb->len) {
                                err = pskb_trim(skb, real_len);
                                if (err)
                                        return err;
                        }
                        hdr_len = skb_tcp_all_headers(skb);
                        if (skb->len == hdr_len) {
                                iph->check = 0;
                                tcp_hdr(skb)->check =
                                        ~csum_tcpudp_magic(iph->saddr,
                                        iph->daddr, tcp_hdrlen(skb),
                                        IPPROTO_TCP, 0);
                                ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) <<
                                        TPD_IPHL_SHIFT;
                                ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) &
                                        TPD_TCPHDRLEN_MASK) <<
                                        TPD_TCPHDRLEN_SHIFT;
                                ptpd->word3 |= 1 << TPD_IP_CSUM_SHIFT;
                                ptpd->word3 |= 1 << TPD_TCP_CSUM_SHIFT;
                                return 1;
                        }

                        iph->check = 0;
                        tcp_hdr(skb)->check = ~csum_tcpudp_magic(iph->saddr,
                                        iph->daddr, 0, IPPROTO_TCP, 0);
                        ip_off = (unsigned char *)iph -
                                (unsigned char *) skb_network_header(skb);
                        if (ip_off == 8) /* 802.3-SNAP frame */
                                ptpd->word3 |= 1 << TPD_ETHTYPE_SHIFT;
                        else if (ip_off != 0)
                                return -2;

                        ptpd->word3 |= (iph->ihl & TPD_IPHL_MASK) <<
                                TPD_IPHL_SHIFT;
                        ptpd->word3 |= ((tcp_hdrlen(skb) >> 2) &
                                TPD_TCPHDRLEN_MASK) << TPD_TCPHDRLEN_SHIFT;
                        ptpd->word3 |= (skb_shinfo(skb)->gso_size &
                                TPD_MSS_MASK) << TPD_MSS_SHIFT;
                        ptpd->word3 |= 1 << TPD_SEGMENT_EN_SHIFT;
                        return 3;
                }
        }
        return 0;
}

static int atl1_tx_csum(struct atl1_adapter *adapter, struct sk_buff *skb,
        struct tx_packet_desc *ptpd)
{
        u8 css, cso;

        if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
                css = skb_checksum_start_offset(skb);
                cso = css + (u8) skb->csum_offset;
                if (unlikely(css & 0x1)) {
                        /* L1 hardware requires an even number here */
                        if (netif_msg_tx_err(adapter))
                                dev_printk(KERN_DEBUG, &adapter->pdev->dev,
                                        "payload offset not an even number\n");
                        return -1;
                }
                ptpd->word3 |= (css & TPD_PLOADOFFSET_MASK) <<
                        TPD_PLOADOFFSET_SHIFT;
                ptpd->word3 |= (cso & TPD_CCSUMOFFSET_MASK) <<
                        TPD_CCSUMOFFSET_SHIFT;
                ptpd->word3 |= 1 << TPD_CUST_CSUM_EN_SHIFT;
                return true;
        }
        return 0;
}

static bool atl1_tx_map(struct atl1_adapter *adapter, struct sk_buff *skb,
                        struct tx_packet_desc *ptpd)
{
        struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
        struct atl1_buffer *buffer_info;
        u16 buf_len = skb->len;
        struct page *page;
        unsigned long offset;
        unsigned int nr_frags;
        unsigned int f;
        int retval;
        u16 first_mapped;
        u16 next_to_use;
        u16 data_len;
        u8 hdr_len;

        buf_len -= skb->data_len;
        nr_frags = skb_shinfo(skb)->nr_frags;
        next_to_use = atomic_read(&tpd_ring->next_to_use);
        first_mapped = next_to_use;
        buffer_info = &tpd_ring->buffer_info[next_to_use];
        BUG_ON(buffer_info->skb);
        /* put skb in last TPD */
        buffer_info->skb = NULL;

        retval = (ptpd->word3 >> TPD_SEGMENT_EN_SHIFT) & TPD_SEGMENT_EN_MASK;
        if (retval) {
                /* TSO */
                hdr_len = skb_tcp_all_headers(skb);
                buffer_info->length = hdr_len;
                page = virt_to_page(skb->data);
                offset = offset_in_page(skb->data);
                buffer_info->dma = dma_map_page(&adapter->pdev->dev, page,
                                                offset, hdr_len,
                                                DMA_TO_DEVICE);
                if (dma_mapping_error(&adapter->pdev->dev, buffer_info->dma))
                        goto dma_err;

                if (++next_to_use == tpd_ring->count)
                        next_to_use = 0;

                if (buf_len > hdr_len) {
                        int i, nseg;

                        data_len = buf_len - hdr_len;
                        nseg = (data_len + ATL1_MAX_TX_BUF_LEN - 1) /
                                ATL1_MAX_TX_BUF_LEN;
                        for (i = 0; i < nseg; i++) {
                                buffer_info =
                                    &tpd_ring->buffer_info[next_to_use];
                                buffer_info->skb = NULL;
                                buffer_info->length =
                                    (ATL1_MAX_TX_BUF_LEN >=
                                     data_len) ? ATL1_MAX_TX_BUF_LEN : data_len;
                                data_len -= buffer_info->length;
                                page = virt_to_page(skb->data +
                                        (hdr_len + i * ATL1_MAX_TX_BUF_LEN));
                                offset = offset_in_page(skb->data +
                                        (hdr_len + i * ATL1_MAX_TX_BUF_LEN));
                                buffer_info->dma = dma_map_page(&adapter->pdev->dev,
                                                                page, offset,
                                                                buffer_info->length,
                                                                DMA_TO_DEVICE);
                                if (dma_mapping_error(&adapter->pdev->dev,
                                                      buffer_info->dma))
                                        goto dma_err;
                                if (++next_to_use == tpd_ring->count)
                                        next_to_use = 0;
                        }
                }
        } else {
                /* not TSO */
                buffer_info->length = buf_len;
                page = virt_to_page(skb->data);
                offset = offset_in_page(skb->data);
                buffer_info->dma = dma_map_page(&adapter->pdev->dev, page,
                                                offset, buf_len,
                                                DMA_TO_DEVICE);
                if (dma_mapping_error(&adapter->pdev->dev, buffer_info->dma))
                        goto dma_err;
                if (++next_to_use == tpd_ring->count)
                        next_to_use = 0;
        }

        for (f = 0; f < nr_frags; f++) {
                const skb_frag_t *frag = &skb_shinfo(skb)->frags[f];
                u16 i, nseg;

                buf_len = skb_frag_size(frag);

                nseg = (buf_len + ATL1_MAX_TX_BUF_LEN - 1) /
                        ATL1_MAX_TX_BUF_LEN;
                for (i = 0; i < nseg; i++) {
                        buffer_info = &tpd_ring->buffer_info[next_to_use];
                        BUG_ON(buffer_info->skb);

                        buffer_info->skb = NULL;
                        buffer_info->length = (buf_len > ATL1_MAX_TX_BUF_LEN) ?
                                ATL1_MAX_TX_BUF_LEN : buf_len;
                        buf_len -= buffer_info->length;
                        buffer_info->dma = skb_frag_dma_map(&adapter->pdev->dev,
                                frag, i * ATL1_MAX_TX_BUF_LEN,
                                buffer_info->length, DMA_TO_DEVICE);
                        if (dma_mapping_error(&adapter->pdev->dev,
                                              buffer_info->dma))
                                goto dma_err;

                        if (++next_to_use == tpd_ring->count)
                                next_to_use = 0;
                }
        }

        /* last tpd's buffer-info */
        buffer_info->skb = skb;

        return true;

 dma_err:
        while (first_mapped != next_to_use) {
                buffer_info = &tpd_ring->buffer_info[first_mapped];
                dma_unmap_page(&adapter->pdev->dev,
                               buffer_info->dma,
                               buffer_info->length,
                               DMA_TO_DEVICE);
                buffer_info->dma = 0;

                if (++first_mapped == tpd_ring->count)
                        first_mapped = 0;
        }
        return false;
}

static void atl1_tx_queue(struct atl1_adapter *adapter, u16 count,
       struct tx_packet_desc *ptpd)
{
        struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
        struct atl1_buffer *buffer_info;
        struct tx_packet_desc *tpd;
        u16 j;
        u32 val;
        u16 next_to_use = (u16) atomic_read(&tpd_ring->next_to_use);

        for (j = 0; j < count; j++) {
                buffer_info = &tpd_ring->buffer_info[next_to_use];
                tpd = ATL1_TPD_DESC(&adapter->tpd_ring, next_to_use);
                if (tpd != ptpd)
                        memcpy(tpd, ptpd, sizeof(struct tx_packet_desc));
                tpd->buffer_addr = cpu_to_le64(buffer_info->dma);
                tpd->word2 &= ~(TPD_BUFLEN_MASK << TPD_BUFLEN_SHIFT);
                tpd->word2 |= (cpu_to_le16(buffer_info->length) &
                        TPD_BUFLEN_MASK) << TPD_BUFLEN_SHIFT;

                /*
                 * if this is the first packet in a TSO chain, set
                 * TPD_HDRFLAG, otherwise, clear it.
                 */
                val = (tpd->word3 >> TPD_SEGMENT_EN_SHIFT) &
                        TPD_SEGMENT_EN_MASK;
                if (val) {
                        if (!j)
                                tpd->word3 |= 1 << TPD_HDRFLAG_SHIFT;
                        else
                                tpd->word3 &= ~(1 << TPD_HDRFLAG_SHIFT);
                }

                if (j == (count - 1))
                        tpd->word3 |= 1 << TPD_EOP_SHIFT;

                if (++next_to_use == tpd_ring->count)
                        next_to_use = 0;
        }
        /*
         * Force memory writes to complete before letting h/w
         * know there are new descriptors to fetch.  (Only
         * applicable for weak-ordered memory model archs,
         * such as IA-64).
         */
        wmb();

        atomic_set(&tpd_ring->next_to_use, next_to_use);
}

static netdev_tx_t atl1_xmit_frame(struct sk_buff *skb,
                                         struct net_device *netdev)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        struct atl1_tpd_ring *tpd_ring = &adapter->tpd_ring;
        int len;
        int tso;
        int count = 1;
        int ret_val;
        struct tx_packet_desc *ptpd;
        u16 vlan_tag;
        unsigned int nr_frags = 0;
        unsigned int mss = 0;
        unsigned int f;
        unsigned int proto_hdr_len;

        len = skb_headlen(skb);

        if (unlikely(skb->len <= 0))
                goto drop_packet;

        nr_frags = skb_shinfo(skb)->nr_frags;
        for (f = 0; f < nr_frags; f++) {
                unsigned int f_size = skb_frag_size(&skb_shinfo(skb)->frags[f]);
                count += (f_size + ATL1_MAX_TX_BUF_LEN - 1) /
                         ATL1_MAX_TX_BUF_LEN;
        }

        mss = skb_shinfo(skb)->gso_size;
        if (mss) {
                if (skb->protocol == htons(ETH_P_IP)) {
                        proto_hdr_len = skb_tcp_all_headers(skb);
                        if (unlikely(proto_hdr_len > len))
                                goto drop_packet;

                        /* need additional TPD ? */
                        if (proto_hdr_len != len)
                                count += (len - proto_hdr_len +
                                        ATL1_MAX_TX_BUF_LEN - 1) /
                                        ATL1_MAX_TX_BUF_LEN;
                }
        }

        if (atl1_tpd_avail(&adapter->tpd_ring) < count) {
                /* not enough descriptors */
                netif_stop_queue(netdev);
                if (netif_msg_tx_queued(adapter))
                        dev_printk(KERN_DEBUG, &adapter->pdev->dev,
                                "tx busy\n");
                return NETDEV_TX_BUSY;
        }

        ptpd = ATL1_TPD_DESC(tpd_ring,
                (u16) atomic_read(&tpd_ring->next_to_use));
        memset(ptpd, 0, sizeof(struct tx_packet_desc));

        if (skb_vlan_tag_present(skb)) {
                vlan_tag = skb_vlan_tag_get(skb);
                vlan_tag = (vlan_tag << 4) | (vlan_tag >> 13) |
                        ((vlan_tag >> 9) & 0x8);
                ptpd->word3 |= 1 << TPD_INS_VL_TAG_SHIFT;
                ptpd->word2 |= (vlan_tag & TPD_VLANTAG_MASK) <<
                        TPD_VLANTAG_SHIFT;
        }

        tso = atl1_tso(adapter, skb, ptpd);
        if (tso < 0)
                goto drop_packet;

        if (!tso) {
                ret_val = atl1_tx_csum(adapter, skb, ptpd);
                if (ret_val < 0)
                        goto drop_packet;
        }

        if (!atl1_tx_map(adapter, skb, ptpd))
                goto drop_packet;

        atl1_tx_queue(adapter, count, ptpd);
        atl1_update_mailbox(adapter);
        return NETDEV_TX_OK;

drop_packet:
        adapter->soft_stats.tx_errors++;
        dev_kfree_skb_any(skb);
        return NETDEV_TX_OK;
}

static int atl1_rings_clean(struct napi_struct *napi, int budget)
{
        struct atl1_adapter *adapter = container_of(napi, struct atl1_adapter, napi);
        int work_done = atl1_intr_rx(adapter, budget);

        if (atl1_intr_tx(adapter))
                work_done = budget;

        /* Let's come again to process some more packets */
        if (work_done >= budget)
                return work_done;

        napi_complete_done(napi, work_done);
        /* re-enable Interrupt */
        if (likely(adapter->int_enabled))
                atlx_imr_set(adapter, IMR_NORMAL_MASK);
        return work_done;
}

static inline int atl1_sched_rings_clean(struct atl1_adapter* adapter)
{
        if (!napi_schedule(&adapter->napi))
                /* It is possible in case even the RX/TX ints are disabled via IMR
                 * register the ISR bits are set anyway (but do not produce IRQ).
                 * To handle such situation the napi functions used to check is
                 * something scheduled or not.
                 */
                return 0;

        /*
         * Disable RX/TX ints via IMR register if it is
         * allowed. NAPI handler must reenable them in same
         * way.
         */
        if (!adapter->int_enabled)
                return 1;

        atlx_imr_set(adapter, IMR_NORXTX_MASK);
        return 1;
}

/**
 * atl1_intr - Interrupt Handler
 * @irq: interrupt number
 * @data: pointer to a network interface device structure
 */
static irqreturn_t atl1_intr(int irq, void *data)
{
        struct atl1_adapter *adapter = netdev_priv(data);
        u32 status;

        status = adapter->cmb.cmb->int_stats;
        if (!status)
                return IRQ_NONE;

        /* clear CMB interrupt status at once,
         * but leave rx/tx interrupt status in case it should be dropped
         * only if rx/tx processing queued. In other case interrupt
         * can be lost.
         */
        adapter->cmb.cmb->int_stats = status & (ISR_CMB_TX | ISR_CMB_RX);

        if (status & ISR_GPHY)  /* clear phy status */
                atlx_clear_phy_int(adapter);

        /* clear ISR status, and Enable CMB DMA/Disable Interrupt */
        iowrite32(status | ISR_DIS_INT, adapter->hw.hw_addr + REG_ISR);

        /* check if SMB intr */
        if (status & ISR_SMB)
                atl1_inc_smb(adapter);

        /* check if PCIE PHY Link down */
        if (status & ISR_PHY_LINKDOWN) {
                if (netif_msg_intr(adapter))
                        dev_printk(KERN_DEBUG, &adapter->pdev->dev,
                                "pcie phy link down %x\n", status);
                if (netif_running(adapter->netdev)) {   /* reset MAC */
                        atlx_irq_disable(adapter);
                        schedule_work(&adapter->reset_dev_task);
                        return IRQ_HANDLED;
                }
        }

        /* check if DMA read/write error ? */
        if (status & (ISR_DMAR_TO_RST | ISR_DMAW_TO_RST)) {
                if (netif_msg_intr(adapter))
                        dev_printk(KERN_DEBUG, &adapter->pdev->dev,
                                "pcie DMA r/w error (status = 0x%x)\n",
                                status);
                atlx_irq_disable(adapter);
                schedule_work(&adapter->reset_dev_task);
                return IRQ_HANDLED;
        }

        /* link event */
        if (status & ISR_GPHY) {
                adapter->soft_stats.tx_carrier_errors++;
                atl1_check_for_link(adapter);
        }

        /* transmit or receive event */
        if (status & (ISR_CMB_TX | ISR_CMB_RX) &&
            atl1_sched_rings_clean(adapter))
                adapter->cmb.cmb->int_stats = adapter->cmb.cmb->int_stats &
                                              ~(ISR_CMB_TX | ISR_CMB_RX);

        /* rx exception */
        if (unlikely(status & (ISR_RXF_OV | ISR_RFD_UNRUN |
                ISR_RRD_OV | ISR_HOST_RFD_UNRUN |
                ISR_HOST_RRD_OV))) {
                if (netif_msg_intr(adapter))
                        dev_printk(KERN_DEBUG,
                                &adapter->pdev->dev,
                                "rx exception, ISR = 0x%x\n",
                                status);
                atl1_sched_rings_clean(adapter);
        }

        /* re-enable Interrupt */
        iowrite32(ISR_DIS_SMB | ISR_DIS_DMA, adapter->hw.hw_addr + REG_ISR);
        return IRQ_HANDLED;
}


/**
 * atl1_phy_config - Timer Call-back
 * @t: timer_list containing pointer to netdev cast into an unsigned long
 */
static void atl1_phy_config(struct timer_list *t)
{
        struct atl1_adapter *adapter = timer_container_of(adapter, t,
                                                          phy_config_timer);
        struct atl1_hw *hw = &adapter->hw;
        unsigned long flags;

        spin_lock_irqsave(&adapter->lock, flags);
        adapter->phy_timer_pending = false;
        atl1_write_phy_reg(hw, MII_ADVERTISE, hw->mii_autoneg_adv_reg);
        atl1_write_phy_reg(hw, MII_ATLX_CR, hw->mii_1000t_ctrl_reg);
        atl1_write_phy_reg(hw, MII_BMCR, MII_CR_RESET | MII_CR_AUTO_NEG_EN);
        spin_unlock_irqrestore(&adapter->lock, flags);
}

/*
 * Orphaned vendor comment left intact here:
 * <vendor comment>
 * If TPD Buffer size equal to 0, PCIE DMAR_TO_INT
 * will assert. We do soft reset <0x1400=1> according
 * with the SPEC. BUT, it seemes that PCIE or DMA
 * state-machine will not be reset. DMAR_TO_INT will
 * assert again and again.
 * </vendor comment>
 */

static int atl1_reset(struct atl1_adapter *adapter)
{
        int ret;
        ret = atl1_reset_hw(&adapter->hw);
        if (ret)
                return ret;
        return atl1_init_hw(&adapter->hw);
}

static s32 atl1_up(struct atl1_adapter *adapter)
{
        struct net_device *netdev = adapter->netdev;
        int err;
        int irq_flags = 0;

        /* hardware has been reset, we need to reload some things */
        atlx_set_multi(netdev);
        atl1_init_ring_ptrs(adapter);
        atlx_restore_vlan(adapter);
        err = atl1_alloc_rx_buffers(adapter);
        if (unlikely(!err))
                /* no RX BUFFER allocated */
                return -ENOMEM;

        if (unlikely(atl1_configure(adapter))) {
                err = -EIO;
                goto err_up;
        }

        err = pci_enable_msi(adapter->pdev);
        if (err) {
                if (netif_msg_ifup(adapter))
                        dev_info(&adapter->pdev->dev,
                                "Unable to enable MSI: %d\n", err);
                irq_flags |= IRQF_SHARED;
        }

        err = request_irq(adapter->pdev->irq, atl1_intr, irq_flags,
                        netdev->name, netdev);
        if (unlikely(err))
                goto err_up;

        napi_enable(&adapter->napi);
        atlx_irq_enable(adapter);
        atl1_check_link(adapter);
        netif_start_queue(netdev);
        return 0;

err_up:
        pci_disable_msi(adapter->pdev);
        /* free rx_buffers */
        atl1_clean_rx_ring(adapter);
        return err;
}

static void atl1_down(struct atl1_adapter *adapter)
{
        struct net_device *netdev = adapter->netdev;

        napi_disable(&adapter->napi);
        netif_stop_queue(netdev);
        timer_delete_sync(&adapter->phy_config_timer);
        adapter->phy_timer_pending = false;

        atlx_irq_disable(adapter);
        free_irq(adapter->pdev->irq, netdev);
        pci_disable_msi(adapter->pdev);
        atl1_reset_hw(&adapter->hw);
        adapter->cmb.cmb->int_stats = 0;

        adapter->link_speed = SPEED_0;
        adapter->link_duplex = -1;
        netif_carrier_off(netdev);

        atl1_clean_tx_ring(adapter);
        atl1_clean_rx_ring(adapter);
}

static void atl1_reset_dev_task(struct work_struct *work)
{
        struct atl1_adapter *adapter =
                container_of(work, struct atl1_adapter, reset_dev_task);
        struct net_device *netdev = adapter->netdev;

        netif_device_detach(netdev);
        atl1_down(adapter);
        atl1_up(adapter);
        netif_device_attach(netdev);
}

/**
 * atl1_change_mtu - Change the Maximum Transfer Unit
 * @netdev: network interface device structure
 * @new_mtu: new value for maximum frame size
 *
 * Returns 0 on success, negative on failure
 */
static int atl1_change_mtu(struct net_device *netdev, int new_mtu)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        int max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN;

        adapter->hw.max_frame_size = max_frame;
        adapter->hw.tx_jumbo_task_th = (max_frame + 7) >> 3;
        adapter->rx_buffer_len = (max_frame + 7) & ~7;
        adapter->hw.rx_jumbo_th = adapter->rx_buffer_len / 8;

        WRITE_ONCE(netdev->mtu, new_mtu);
        if (netif_running(netdev)) {
                atl1_down(adapter);
                atl1_up(adapter);
        }

        return 0;
}

/**
 * atl1_open - Called when a network interface is made active
 * @netdev: network interface device structure
 *
 * Returns 0 on success, negative value on failure
 *
 * The open entry point is called when a network interface is made
 * active by the system (IFF_UP).  At this point all resources needed
 * for transmit and receive operations are allocated, the interrupt
 * handler is registered with the OS, the watchdog timer is started,
 * and the stack is notified that the interface is ready.
 */
static int atl1_open(struct net_device *netdev)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        int err;

        netif_carrier_off(netdev);

        /* allocate transmit descriptors */
        err = atl1_setup_ring_resources(adapter);
        if (err)
                return err;

        err = atl1_up(adapter);
        if (err)
                goto err_up;

        return 0;

err_up:
        atl1_reset(adapter);
        return err;
}

/**
 * atl1_close - Disables a network interface
 * @netdev: network interface device structure
 *
 * Returns 0, this is not allowed to fail
 *
 * The close entry point is called when an interface is de-activated
 * by the OS.  The hardware is still under the drivers control, but
 * needs to be disabled.  A global MAC reset is issued to stop the
 * hardware, and all transmit and receive resources are freed.
 */
static int atl1_close(struct net_device *netdev)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        atl1_down(adapter);
        atl1_free_ring_resources(adapter);
        return 0;
}

#ifdef CONFIG_PM_SLEEP
static int atl1_suspend(struct device *dev)
{
        struct net_device *netdev = dev_get_drvdata(dev);
        struct atl1_adapter *adapter = netdev_priv(netdev);
        struct atl1_hw *hw = &adapter->hw;
        u32 ctrl = 0;
        u32 wufc = adapter->wol;
        u32 val;
        u16 speed;
        u16 duplex;

        netif_device_detach(netdev);
        if (netif_running(netdev))
                atl1_down(adapter);

        atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
        atl1_read_phy_reg(hw, MII_BMSR, (u16 *) & ctrl);
        val = ctrl & BMSR_LSTATUS;
        if (val)
                wufc &= ~ATLX_WUFC_LNKC;
        if (!wufc)
                goto disable_wol;

        if (val) {
                val = atl1_get_speed_and_duplex(hw, &speed, &duplex);
                if (val) {
                        if (netif_msg_ifdown(adapter))
                                dev_printk(KERN_DEBUG, dev,
                                        "error getting speed/duplex\n");
                        goto disable_wol;
                }

                ctrl = 0;

                /* enable magic packet WOL */
                if (wufc & ATLX_WUFC_MAG)
                        ctrl |= (WOL_MAGIC_EN | WOL_MAGIC_PME_EN);
                iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
                ioread32(hw->hw_addr + REG_WOL_CTRL);

                /* configure the mac */
                ctrl = MAC_CTRL_RX_EN;
                ctrl |= ((u32)((speed == SPEED_1000) ? MAC_CTRL_SPEED_1000 :
                        MAC_CTRL_SPEED_10_100) << MAC_CTRL_SPEED_SHIFT);
                if (duplex == FULL_DUPLEX)
                        ctrl |= MAC_CTRL_DUPLX;
                ctrl |= (((u32)adapter->hw.preamble_len &
                        MAC_CTRL_PRMLEN_MASK) << MAC_CTRL_PRMLEN_SHIFT);
                __atlx_vlan_mode(netdev->features, &ctrl);
                if (wufc & ATLX_WUFC_MAG)
                        ctrl |= MAC_CTRL_BC_EN;
                iowrite32(ctrl, hw->hw_addr + REG_MAC_CTRL);
                ioread32(hw->hw_addr + REG_MAC_CTRL);

                /* poke the PHY */
                ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
                ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
                iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
                ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
        } else {
                ctrl |= (WOL_LINK_CHG_EN | WOL_LINK_CHG_PME_EN);
                iowrite32(ctrl, hw->hw_addr + REG_WOL_CTRL);
                ioread32(hw->hw_addr + REG_WOL_CTRL);
                iowrite32(0, hw->hw_addr + REG_MAC_CTRL);
                ioread32(hw->hw_addr + REG_MAC_CTRL);
                hw->phy_configured = false;
        }

        return 0;

 disable_wol:
        iowrite32(0, hw->hw_addr + REG_WOL_CTRL);
        ioread32(hw->hw_addr + REG_WOL_CTRL);
        ctrl = ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
        ctrl |= PCIE_PHYMISC_FORCE_RCV_DET;
        iowrite32(ctrl, hw->hw_addr + REG_PCIE_PHYMISC);
        ioread32(hw->hw_addr + REG_PCIE_PHYMISC);
        hw->phy_configured = false;

        return 0;
}

static int atl1_resume(struct device *dev)
{
        struct net_device *netdev = dev_get_drvdata(dev);
        struct atl1_adapter *adapter = netdev_priv(netdev);

        iowrite32(0, adapter->hw.hw_addr + REG_WOL_CTRL);

        atl1_reset_hw(&adapter->hw);

        if (netif_running(netdev)) {
                adapter->cmb.cmb->int_stats = 0;
                atl1_up(adapter);
        }
        netif_device_attach(netdev);

        return 0;
}
#endif

static SIMPLE_DEV_PM_OPS(atl1_pm_ops, atl1_suspend, atl1_resume);

static void atl1_shutdown(struct pci_dev *pdev)
{
        struct net_device *netdev = pci_get_drvdata(pdev);
        struct atl1_adapter *adapter = netdev_priv(netdev);

#ifdef CONFIG_PM_SLEEP
        atl1_suspend(&pdev->dev);
#endif
        pci_wake_from_d3(pdev, adapter->wol);
        pci_set_power_state(pdev, PCI_D3hot);
}

#ifdef CONFIG_NET_POLL_CONTROLLER
static void atl1_poll_controller(struct net_device *netdev)
{
        disable_irq(netdev->irq);
        atl1_intr(netdev->irq, netdev);
        enable_irq(netdev->irq);
}
#endif

static const struct net_device_ops atl1_netdev_ops = {
        .ndo_open               = atl1_open,
        .ndo_stop               = atl1_close,
        .ndo_start_xmit         = atl1_xmit_frame,
        .ndo_set_rx_mode        = atlx_set_multi,
        .ndo_validate_addr      = eth_validate_addr,
        .ndo_set_mac_address    = atl1_set_mac,
        .ndo_change_mtu         = atl1_change_mtu,
        .ndo_fix_features       = atlx_fix_features,
        .ndo_set_features       = atlx_set_features,
        .ndo_eth_ioctl          = atlx_ioctl,
        .ndo_tx_timeout         = atlx_tx_timeout,
#ifdef CONFIG_NET_POLL_CONTROLLER
        .ndo_poll_controller    = atl1_poll_controller,
#endif
};

/**
 * atl1_probe - Device Initialization Routine
 * @pdev: PCI device information struct
 * @ent: entry in atl1_pci_tbl
 *
 * Returns 0 on success, negative on failure
 *
 * atl1_probe initializes an adapter identified by a pci_dev structure.
 * The OS initialization, configuring of the adapter private structure,
 * and a hardware reset occur.
 */
static int atl1_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
        struct net_device *netdev;
        struct atl1_adapter *adapter;
        static int cards_found = 0;
        int err;

        err = pci_enable_device(pdev);
        if (err)
                return err;

        /*
         * The atl1 chip can DMA to 64-bit addresses, but it uses a single
         * shared register for the high 32 bits, so only a single, aligned,
         * 4 GB physical address range can be used at a time.
         *
         * Supporting 64-bit DMA on this hardware is more trouble than it's
         * worth.  It is far easier to limit to 32-bit DMA than update
         * various kernel subsystems to support the mechanics required by a
         * fixed-high-32-bit system.
         */
        err = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32));
        if (err) {
                dev_err(&pdev->dev, "no usable DMA configuration\n");
                goto err_dma;
        }
        /*
         * Mark all PCI regions associated with PCI device
         * pdev as being reserved by owner atl1_driver_name
         */
        err = pci_request_regions(pdev, ATLX_DRIVER_NAME);
        if (err)
                goto err_request_regions;

        /*
         * Enables bus-mastering on the device and calls
         * pcibios_set_master to do the needed arch specific settings
         */
        pci_set_master(pdev);

        netdev = alloc_etherdev(sizeof(struct atl1_adapter));
        if (!netdev) {
                err = -ENOMEM;
                goto err_alloc_etherdev;
        }
        SET_NETDEV_DEV(netdev, &pdev->dev);

        pci_set_drvdata(pdev, netdev);
        adapter = netdev_priv(netdev);
        adapter->netdev = netdev;
        adapter->pdev = pdev;
        adapter->hw.back = adapter;
        adapter->msg_enable = netif_msg_init(debug, atl1_default_msg);

        adapter->hw.hw_addr = pci_iomap(pdev, 0, 0);
        if (!adapter->hw.hw_addr) {
                err = -EIO;
                goto err_pci_iomap;
        }
        /* get device revision number */
        adapter->hw.dev_rev = ioread16(adapter->hw.hw_addr +
                (REG_MASTER_CTRL + 2));

        /* set default ring resource counts */
        adapter->rfd_ring.count = adapter->rrd_ring.count = ATL1_DEFAULT_RFD;
        adapter->tpd_ring.count = ATL1_DEFAULT_TPD;

        adapter->mii.dev = netdev;
        adapter->mii.mdio_read = mdio_read;
        adapter->mii.mdio_write = mdio_write;
        adapter->mii.phy_id_mask = 0x1f;
        adapter->mii.reg_num_mask = 0x1f;

        netdev->netdev_ops = &atl1_netdev_ops;
        netdev->watchdog_timeo = 5 * HZ;
        netif_napi_add(netdev, &adapter->napi, atl1_rings_clean);

        netdev->ethtool_ops = &atl1_ethtool_ops;
        adapter->bd_number = cards_found;

        /* setup the private structure */
        err = atl1_sw_init(adapter);
        if (err)
                goto err_common;

        netdev->features = NETIF_F_HW_CSUM;
        netdev->features |= NETIF_F_SG;
        netdev->features |= (NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX);

        netdev->hw_features = NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_TSO |
                              NETIF_F_HW_VLAN_CTAG_RX;

        /* is this valid? see atl1_setup_mac_ctrl() */
        netdev->features |= NETIF_F_RXCSUM;

        /* MTU range: 42 - 10218 */
        netdev->min_mtu = ETH_ZLEN - (ETH_HLEN + VLAN_HLEN);
        netdev->max_mtu = MAX_JUMBO_FRAME_SIZE -
                          (ETH_HLEN + ETH_FCS_LEN + VLAN_HLEN);

        /*
         * patch for some L1 of old version,
         * the final version of L1 may not need these
         * patches
         */
        /* atl1_pcie_patch(adapter); */

        /* really reset GPHY core */
        iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE);

        /*
         * reset the controller to
         * put the device in a known good starting state
         */
        if (atl1_reset_hw(&adapter->hw)) {
                err = -EIO;
                goto err_common;
        }

        /* copy the MAC address out of the EEPROM */
        if (atl1_read_mac_addr(&adapter->hw)) {
                /* mark random mac */
                netdev->addr_assign_type = NET_ADDR_RANDOM;
        }
        eth_hw_addr_set(netdev, adapter->hw.mac_addr);

        if (!is_valid_ether_addr(netdev->dev_addr)) {
                err = -EIO;
                goto err_common;
        }

        atl1_check_options(adapter);

        /* pre-init the MAC, and setup link */
        err = atl1_init_hw(&adapter->hw);
        if (err) {
                err = -EIO;
                goto err_common;
        }

        atl1_pcie_patch(adapter);
        /* assume we have no link for now */
        netif_carrier_off(netdev);

        timer_setup(&adapter->phy_config_timer, atl1_phy_config, 0);
        adapter->phy_timer_pending = false;

        INIT_WORK(&adapter->reset_dev_task, atl1_reset_dev_task);

        INIT_WORK(&adapter->link_chg_task, atlx_link_chg_task);

        err = register_netdev(netdev);
        if (err)
                goto err_common;

        cards_found++;
        atl1_via_workaround(adapter);
        return 0;

err_common:
        pci_iounmap(pdev, adapter->hw.hw_addr);
err_pci_iomap:
        free_netdev(netdev);
err_alloc_etherdev:
        pci_release_regions(pdev);
err_dma:
err_request_regions:
        pci_disable_device(pdev);
        return err;
}

/**
 * atl1_remove - Device Removal Routine
 * @pdev: PCI device information struct
 *
 * atl1_remove is called by the PCI subsystem to alert the driver
 * that it should release a PCI device.  The could be caused by a
 * Hot-Plug event, or because the driver is going to be removed from
 * memory.
 */
static void atl1_remove(struct pci_dev *pdev)
{
        struct net_device *netdev = pci_get_drvdata(pdev);
        struct atl1_adapter *adapter;
        /* Device not available. Return. */
        if (!netdev)
                return;

        adapter = netdev_priv(netdev);

        /*
         * Some atl1 boards lack persistent storage for their MAC, and get it
         * from the BIOS during POST.  If we've been messing with the MAC
         * address, we need to save the permanent one.
         */
        if (!ether_addr_equal_unaligned(adapter->hw.mac_addr,
                                        adapter->hw.perm_mac_addr)) {
                memcpy(adapter->hw.mac_addr, adapter->hw.perm_mac_addr,
                        ETH_ALEN);
                atl1_set_mac_addr(&adapter->hw);
        }

        iowrite16(0, adapter->hw.hw_addr + REG_PHY_ENABLE);
        unregister_netdev(netdev);
        pci_iounmap(pdev, adapter->hw.hw_addr);
        pci_release_regions(pdev);
        free_netdev(netdev);
        pci_disable_device(pdev);
}

static struct pci_driver atl1_driver = {
        .name = ATLX_DRIVER_NAME,
        .id_table = atl1_pci_tbl,
        .probe = atl1_probe,
        .remove = atl1_remove,
        .shutdown = atl1_shutdown,
        .driver.pm = &atl1_pm_ops,
};

struct atl1_stats {
        char stat_string[ETH_GSTRING_LEN];
        int sizeof_stat;
        int stat_offset;
};

#define ATL1_STAT(m) \
        sizeof(((struct atl1_adapter *)0)->m), offsetof(struct atl1_adapter, m)

static struct atl1_stats atl1_gstrings_stats[] = {
        {"rx_packets", ATL1_STAT(soft_stats.rx_packets)},
        {"tx_packets", ATL1_STAT(soft_stats.tx_packets)},
        {"rx_bytes", ATL1_STAT(soft_stats.rx_bytes)},
        {"tx_bytes", ATL1_STAT(soft_stats.tx_bytes)},
        {"rx_errors", ATL1_STAT(soft_stats.rx_errors)},
        {"tx_errors", ATL1_STAT(soft_stats.tx_errors)},
        {"multicast", ATL1_STAT(soft_stats.multicast)},
        {"collisions", ATL1_STAT(soft_stats.collisions)},
        {"rx_length_errors", ATL1_STAT(soft_stats.rx_length_errors)},
        {"rx_over_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
        {"rx_crc_errors", ATL1_STAT(soft_stats.rx_crc_errors)},
        {"rx_frame_errors", ATL1_STAT(soft_stats.rx_frame_errors)},
        {"rx_fifo_errors", ATL1_STAT(soft_stats.rx_fifo_errors)},
        {"rx_missed_errors", ATL1_STAT(soft_stats.rx_missed_errors)},
        {"tx_aborted_errors", ATL1_STAT(soft_stats.tx_aborted_errors)},
        {"tx_carrier_errors", ATL1_STAT(soft_stats.tx_carrier_errors)},
        {"tx_fifo_errors", ATL1_STAT(soft_stats.tx_fifo_errors)},
        {"tx_window_errors", ATL1_STAT(soft_stats.tx_window_errors)},
        {"tx_abort_exce_coll", ATL1_STAT(soft_stats.excecol)},
        {"tx_abort_late_coll", ATL1_STAT(soft_stats.latecol)},
        {"tx_deferred_ok", ATL1_STAT(soft_stats.deffer)},
        {"tx_single_coll_ok", ATL1_STAT(soft_stats.scc)},
        {"tx_multi_coll_ok", ATL1_STAT(soft_stats.mcc)},
        {"tx_underrun", ATL1_STAT(soft_stats.tx_underrun)},
        {"tx_trunc", ATL1_STAT(soft_stats.tx_trunc)},
        {"tx_pause", ATL1_STAT(soft_stats.tx_pause)},
        {"rx_pause", ATL1_STAT(soft_stats.rx_pause)},
        {"rx_rrd_ov", ATL1_STAT(soft_stats.rx_rrd_ov)},
        {"rx_trunc", ATL1_STAT(soft_stats.rx_trunc)}
};

static void atl1_get_ethtool_stats(struct net_device *netdev,
        struct ethtool_stats *stats, u64 *data)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        int i;
        char *p;

        for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
                p = (char *)adapter+atl1_gstrings_stats[i].stat_offset;
                data[i] = (atl1_gstrings_stats[i].sizeof_stat ==
                        sizeof(u64)) ? *(u64 *)p : *(u32 *)p;
        }

}

static int atl1_get_sset_count(struct net_device *netdev, int sset)
{
        switch (sset) {
        case ETH_SS_STATS:
                return ARRAY_SIZE(atl1_gstrings_stats);
        default:
                return -EOPNOTSUPP;
        }
}

static int atl1_get_link_ksettings(struct net_device *netdev,
                                   struct ethtool_link_ksettings *cmd)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        struct atl1_hw *hw = &adapter->hw;
        u32 supported, advertising;

        supported = (SUPPORTED_10baseT_Half |
                           SUPPORTED_10baseT_Full |
                           SUPPORTED_100baseT_Half |
                           SUPPORTED_100baseT_Full |
                           SUPPORTED_1000baseT_Full |
                           SUPPORTED_Autoneg | SUPPORTED_TP);
        advertising = ADVERTISED_TP;
        if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
            hw->media_type == MEDIA_TYPE_1000M_FULL) {
                advertising |= ADVERTISED_Autoneg;
                if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR) {
                        advertising |= ADVERTISED_Autoneg;
                        advertising |=
                            (ADVERTISED_10baseT_Half |
                             ADVERTISED_10baseT_Full |
                             ADVERTISED_100baseT_Half |
                             ADVERTISED_100baseT_Full |
                             ADVERTISED_1000baseT_Full);
                } else
                        advertising |= (ADVERTISED_1000baseT_Full);
        }
        cmd->base.port = PORT_TP;
        cmd->base.phy_address = 0;

        if (netif_carrier_ok(adapter->netdev)) {
                u16 link_speed, link_duplex;
                atl1_get_speed_and_duplex(hw, &link_speed, &link_duplex);
                cmd->base.speed = link_speed;
                if (link_duplex == FULL_DUPLEX)
                        cmd->base.duplex = DUPLEX_FULL;
                else
                        cmd->base.duplex = DUPLEX_HALF;
        } else {
                cmd->base.speed = SPEED_UNKNOWN;
                cmd->base.duplex = DUPLEX_UNKNOWN;
        }
        if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
            hw->media_type == MEDIA_TYPE_1000M_FULL)
                cmd->base.autoneg = AUTONEG_ENABLE;
        else
                cmd->base.autoneg = AUTONEG_DISABLE;

        ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.supported,
                                                supported);
        ethtool_convert_legacy_u32_to_link_mode(cmd->link_modes.advertising,
                                                advertising);

        return 0;
}

static int atl1_set_link_ksettings(struct net_device *netdev,
                                   const struct ethtool_link_ksettings *cmd)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        struct atl1_hw *hw = &adapter->hw;
        u16 phy_data;
        int ret_val = 0;
        u16 old_media_type = hw->media_type;

        if (netif_running(adapter->netdev)) {
                if (netif_msg_link(adapter))
                        dev_dbg(&adapter->pdev->dev,
                                "ethtool shutting down adapter\n");
                atl1_down(adapter);
        }

        if (cmd->base.autoneg == AUTONEG_ENABLE)
                hw->media_type = MEDIA_TYPE_AUTO_SENSOR;
        else {
                u32 speed = cmd->base.speed;
                if (speed == SPEED_1000) {
                        if (cmd->base.duplex != DUPLEX_FULL) {
                                if (netif_msg_link(adapter))
                                        dev_warn(&adapter->pdev->dev,
                                                "1000M half is invalid\n");
                                ret_val = -EINVAL;
                                goto exit_sset;
                        }
                        hw->media_type = MEDIA_TYPE_1000M_FULL;
                } else if (speed == SPEED_100) {
                        if (cmd->base.duplex == DUPLEX_FULL)
                                hw->media_type = MEDIA_TYPE_100M_FULL;
                        else
                                hw->media_type = MEDIA_TYPE_100M_HALF;
                } else {
                        if (cmd->base.duplex == DUPLEX_FULL)
                                hw->media_type = MEDIA_TYPE_10M_FULL;
                        else
                                hw->media_type = MEDIA_TYPE_10M_HALF;
                }
        }

        if (atl1_phy_setup_autoneg_adv(hw)) {
                ret_val = -EINVAL;
                if (netif_msg_link(adapter))
                        dev_warn(&adapter->pdev->dev,
                                "invalid ethtool speed/duplex setting\n");
                goto exit_sset;
        }
        if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
            hw->media_type == MEDIA_TYPE_1000M_FULL)
                phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
        else {
                switch (hw->media_type) {
                case MEDIA_TYPE_100M_FULL:
                        phy_data =
                            MII_CR_FULL_DUPLEX | MII_CR_SPEED_100 |
                            MII_CR_RESET;
                        break;
                case MEDIA_TYPE_100M_HALF:
                        phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
                        break;
                case MEDIA_TYPE_10M_FULL:
                        phy_data =
                            MII_CR_FULL_DUPLEX | MII_CR_SPEED_10 | MII_CR_RESET;
                        break;
                default:
                        /* MEDIA_TYPE_10M_HALF: */
                        phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
                        break;
                }
        }
        atl1_write_phy_reg(hw, MII_BMCR, phy_data);
exit_sset:
        if (ret_val)
                hw->media_type = old_media_type;

        if (netif_running(adapter->netdev)) {
                if (netif_msg_link(adapter))
                        dev_dbg(&adapter->pdev->dev,
                                "ethtool starting adapter\n");
                atl1_up(adapter);
        } else if (!ret_val) {
                if (netif_msg_link(adapter))
                        dev_dbg(&adapter->pdev->dev,
                                "ethtool resetting adapter\n");
                atl1_reset(adapter);
        }
        return ret_val;
}

static void atl1_get_drvinfo(struct net_device *netdev,
        struct ethtool_drvinfo *drvinfo)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);

        strscpy(drvinfo->driver, ATLX_DRIVER_NAME, sizeof(drvinfo->driver));
        strscpy(drvinfo->bus_info, pci_name(adapter->pdev),
                sizeof(drvinfo->bus_info));
}

static void atl1_get_wol(struct net_device *netdev,
        struct ethtool_wolinfo *wol)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);

        wol->supported = WAKE_MAGIC;
        wol->wolopts = 0;
        if (adapter->wol & ATLX_WUFC_MAG)
                wol->wolopts |= WAKE_MAGIC;
}

static int atl1_set_wol(struct net_device *netdev,
        struct ethtool_wolinfo *wol)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);

        if (wol->wolopts & (WAKE_PHY | WAKE_UCAST | WAKE_MCAST | WAKE_BCAST |
                WAKE_ARP | WAKE_MAGICSECURE))
                return -EOPNOTSUPP;
        adapter->wol = 0;
        if (wol->wolopts & WAKE_MAGIC)
                adapter->wol |= ATLX_WUFC_MAG;

        device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);

        return 0;
}

static u32 atl1_get_msglevel(struct net_device *netdev)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        return adapter->msg_enable;
}

static void atl1_set_msglevel(struct net_device *netdev, u32 value)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        adapter->msg_enable = value;
}

static int atl1_get_regs_len(struct net_device *netdev)
{
        return ATL1_REG_COUNT * sizeof(u32);
}

static void atl1_get_regs(struct net_device *netdev, struct ethtool_regs *regs,
        void *p)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        struct atl1_hw *hw = &adapter->hw;
        unsigned int i;
        u32 *regbuf = p;

        for (i = 0; i < ATL1_REG_COUNT; i++) {
                /*
                 * This switch statement avoids reserved regions
                 * of register space.
                 */
                switch (i) {
                case 6 ... 9:
                case 14:
                case 29 ... 31:
                case 34 ... 63:
                case 75 ... 127:
                case 136 ... 1023:
                case 1027 ... 1087:
                case 1091 ... 1151:
                case 1194 ... 1195:
                case 1200 ... 1201:
                case 1206 ... 1213:
                case 1216 ... 1279:
                case 1290 ... 1311:
                case 1323 ... 1343:
                case 1358 ... 1359:
                case 1368 ... 1375:
                case 1378 ... 1383:
                case 1388 ... 1391:
                case 1393 ... 1395:
                case 1402 ... 1403:
                case 1410 ... 1471:
                case 1522 ... 1535:
                        /* reserved region; don't read it */
                        regbuf[i] = 0;
                        break;
                default:
                        /* unreserved region */
                        regbuf[i] = ioread32(hw->hw_addr + (i * sizeof(u32)));
                }
        }
}

static void atl1_get_ringparam(struct net_device *netdev,
                               struct ethtool_ringparam *ring,
                               struct kernel_ethtool_ringparam *kernel_ring,
                               struct netlink_ext_ack *extack)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        struct atl1_tpd_ring *txdr = &adapter->tpd_ring;
        struct atl1_rfd_ring *rxdr = &adapter->rfd_ring;

        ring->rx_max_pending = ATL1_MAX_RFD;
        ring->tx_max_pending = ATL1_MAX_TPD;
        ring->rx_pending = rxdr->count;
        ring->tx_pending = txdr->count;
}

static int atl1_set_ringparam(struct net_device *netdev,
                              struct ethtool_ringparam *ring,
                              struct kernel_ethtool_ringparam *kernel_ring,
                              struct netlink_ext_ack *extack)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        struct atl1_tpd_ring *tpdr = &adapter->tpd_ring;
        struct atl1_rrd_ring *rrdr = &adapter->rrd_ring;
        struct atl1_rfd_ring *rfdr = &adapter->rfd_ring;

        struct atl1_tpd_ring tpd_old, tpd_new;
        struct atl1_rfd_ring rfd_old, rfd_new;
        struct atl1_rrd_ring rrd_old, rrd_new;
        struct atl1_ring_header rhdr_old, rhdr_new;
        struct atl1_smb smb;
        struct atl1_cmb cmb;
        int err;

        tpd_old = adapter->tpd_ring;
        rfd_old = adapter->rfd_ring;
        rrd_old = adapter->rrd_ring;
        rhdr_old = adapter->ring_header;

        if (netif_running(adapter->netdev))
                atl1_down(adapter);

        rfdr->count = (u16) max(ring->rx_pending, (u32) ATL1_MIN_RFD);
        rfdr->count = rfdr->count > ATL1_MAX_RFD ? ATL1_MAX_RFD :
                        rfdr->count;
        rfdr->count = (rfdr->count + 3) & ~3;
        rrdr->count = rfdr->count;

        tpdr->count = (u16) max(ring->tx_pending, (u32) ATL1_MIN_TPD);
        tpdr->count = tpdr->count > ATL1_MAX_TPD ? ATL1_MAX_TPD :
                        tpdr->count;
        tpdr->count = (tpdr->count + 3) & ~3;

        if (netif_running(adapter->netdev)) {
                /* try to get new resources before deleting old */
                err = atl1_setup_ring_resources(adapter);
                if (err)
                        goto err_setup_ring;

                /*
                 * save the new, restore the old in order to free it,
                 * then restore the new back again
                 */

                rfd_new = adapter->rfd_ring;
                rrd_new = adapter->rrd_ring;
                tpd_new = adapter->tpd_ring;
                rhdr_new = adapter->ring_header;
                adapter->rfd_ring = rfd_old;
                adapter->rrd_ring = rrd_old;
                adapter->tpd_ring = tpd_old;
                adapter->ring_header = rhdr_old;
                /*
                 * Save SMB and CMB, since atl1_free_ring_resources
                 * will clear them.
                 */
                smb = adapter->smb;
                cmb = adapter->cmb;
                atl1_free_ring_resources(adapter);
                adapter->rfd_ring = rfd_new;
                adapter->rrd_ring = rrd_new;
                adapter->tpd_ring = tpd_new;
                adapter->ring_header = rhdr_new;
                adapter->smb = smb;
                adapter->cmb = cmb;

                err = atl1_up(adapter);
                if (err)
                        return err;
        }
        return 0;

err_setup_ring:
        adapter->rfd_ring = rfd_old;
        adapter->rrd_ring = rrd_old;
        adapter->tpd_ring = tpd_old;
        adapter->ring_header = rhdr_old;
        atl1_up(adapter);
        return err;
}

static void atl1_get_pauseparam(struct net_device *netdev,
        struct ethtool_pauseparam *epause)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        struct atl1_hw *hw = &adapter->hw;

        if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
            hw->media_type == MEDIA_TYPE_1000M_FULL) {
                epause->autoneg = AUTONEG_ENABLE;
        } else {
                epause->autoneg = AUTONEG_DISABLE;
        }
        epause->rx_pause = 1;
        epause->tx_pause = 1;
}

static int atl1_set_pauseparam(struct net_device *netdev,
        struct ethtool_pauseparam *epause)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        struct atl1_hw *hw = &adapter->hw;

        if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
            hw->media_type == MEDIA_TYPE_1000M_FULL) {
                epause->autoneg = AUTONEG_ENABLE;
        } else {
                epause->autoneg = AUTONEG_DISABLE;
        }

        epause->rx_pause = 1;
        epause->tx_pause = 1;

        return 0;
}

static void atl1_get_strings(struct net_device *netdev, u32 stringset,
        u8 *data)
{
        u8 *p = data;
        int i;

        switch (stringset) {
        case ETH_SS_STATS:
                for (i = 0; i < ARRAY_SIZE(atl1_gstrings_stats); i++) {
                        memcpy(p, atl1_gstrings_stats[i].stat_string,
                                ETH_GSTRING_LEN);
                        p += ETH_GSTRING_LEN;
                }
                break;
        }
}

static int atl1_nway_reset(struct net_device *netdev)
{
        struct atl1_adapter *adapter = netdev_priv(netdev);
        struct atl1_hw *hw = &adapter->hw;

        if (netif_running(netdev)) {
                u16 phy_data;
                atl1_down(adapter);

                if (hw->media_type == MEDIA_TYPE_AUTO_SENSOR ||
                        hw->media_type == MEDIA_TYPE_1000M_FULL) {
                        phy_data = MII_CR_RESET | MII_CR_AUTO_NEG_EN;
                } else {
                        switch (hw->media_type) {
                        case MEDIA_TYPE_100M_FULL:
                                phy_data = MII_CR_FULL_DUPLEX |
                                        MII_CR_SPEED_100 | MII_CR_RESET;
                                break;
                        case MEDIA_TYPE_100M_HALF:
                                phy_data = MII_CR_SPEED_100 | MII_CR_RESET;
                                break;
                        case MEDIA_TYPE_10M_FULL:
                                phy_data = MII_CR_FULL_DUPLEX |
                                        MII_CR_SPEED_10 | MII_CR_RESET;
                                break;
                        default:
                                /* MEDIA_TYPE_10M_HALF */
                                phy_data = MII_CR_SPEED_10 | MII_CR_RESET;
                        }
                }
                atl1_write_phy_reg(hw, MII_BMCR, phy_data);
                atl1_up(adapter);
        }
        return 0;
}

static const struct ethtool_ops atl1_ethtool_ops = {
        .get_drvinfo            = atl1_get_drvinfo,
        .get_wol                = atl1_get_wol,
        .set_wol                = atl1_set_wol,
        .get_msglevel           = atl1_get_msglevel,
        .set_msglevel           = atl1_set_msglevel,
        .get_regs_len           = atl1_get_regs_len,
        .get_regs               = atl1_get_regs,
        .get_ringparam          = atl1_get_ringparam,
        .set_ringparam          = atl1_set_ringparam,
        .get_pauseparam         = atl1_get_pauseparam,
        .set_pauseparam         = atl1_set_pauseparam,
        .get_link               = ethtool_op_get_link,
        .get_strings            = atl1_get_strings,
        .nway_reset             = atl1_nway_reset,
        .get_ethtool_stats      = atl1_get_ethtool_stats,
        .get_sset_count         = atl1_get_sset_count,
        .get_link_ksettings     = atl1_get_link_ksettings,
        .set_link_ksettings     = atl1_set_link_ksettings,
};

module_pci_driver(atl1_driver);