// SPDX-License-Identifier: GPL-2.0
/* Copyright(c) 1999 - 2024 Intel Corporation. */

#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/sched.h>

#include "ixgbe.h"
#include "ixgbe_phy.h"
#include "ixgbe_mbx.h"

#define IXGBE_82599_MAX_TX_QUEUES 128
#define IXGBE_82599_MAX_RX_QUEUES 128
#define IXGBE_82599_RAR_ENTRIES   128
#define IXGBE_82599_MC_TBL_SIZE   128
#define IXGBE_82599_VFT_TBL_SIZE  128
#define IXGBE_82599_RX_PB_SIZE    512

static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw);
static void
ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *, ixgbe_link_speed);
static int ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
                                           ixgbe_link_speed speed,
                                           bool autoneg_wait_to_complete);
static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw);
static int ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
                                      bool autoneg_wait_to_complete);
static int ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
                                      ixgbe_link_speed speed,
                                      bool autoneg_wait_to_complete);
static int ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
                                         ixgbe_link_speed speed,
                                         bool autoneg_wait_to_complete);
static int ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw);
static int ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
                                     u8 dev_addr, u8 *data);
static int ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
                                      u8 dev_addr, u8 data);
static int ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw);
static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw);

bool ixgbe_mng_enabled(struct ixgbe_hw *hw)
{
        u32 fwsm, manc, factps;

        fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM(hw));
        if ((fwsm & IXGBE_FWSM_MODE_MASK) != IXGBE_FWSM_FW_MODE_PT)
                return false;

        manc = IXGBE_READ_REG(hw, IXGBE_MANC);
        if (!(manc & IXGBE_MANC_RCV_TCO_EN))
                return false;

        factps = IXGBE_READ_REG(hw, IXGBE_FACTPS(hw));
        if (factps & IXGBE_FACTPS_MNGCG)
                return false;

        return true;
}

static void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw)
{
        struct ixgbe_mac_info *mac = &hw->mac;

        /* enable the laser control functions for SFP+ fiber
         * and MNG not enabled
         */
        if ((mac->ops.get_media_type(hw) == ixgbe_media_type_fiber) &&
            !ixgbe_mng_enabled(hw)) {
                mac->ops.disable_tx_laser =
                                       &ixgbe_disable_tx_laser_multispeed_fiber;
                mac->ops.enable_tx_laser =
                                        &ixgbe_enable_tx_laser_multispeed_fiber;
                mac->ops.flap_tx_laser = &ixgbe_flap_tx_laser_multispeed_fiber;
        } else {
                mac->ops.disable_tx_laser = NULL;
                mac->ops.enable_tx_laser = NULL;
                mac->ops.flap_tx_laser = NULL;
        }

        if (hw->phy.multispeed_fiber) {
                /* Set up dual speed SFP+ support */
                mac->ops.setup_link = &ixgbe_setup_mac_link_multispeed_fiber;
                mac->ops.setup_mac_link = ixgbe_setup_mac_link_82599;
                mac->ops.set_rate_select_speed =
                                               ixgbe_set_hard_rate_select_speed;
        } else {
                if ((mac->ops.get_media_type(hw) ==
                     ixgbe_media_type_backplane) &&
                    (hw->phy.smart_speed == ixgbe_smart_speed_auto ||
                     hw->phy.smart_speed == ixgbe_smart_speed_on) &&
                     !ixgbe_verify_lesm_fw_enabled_82599(hw))
                        mac->ops.setup_link = &ixgbe_setup_mac_link_smartspeed;
                else
                        mac->ops.setup_link = &ixgbe_setup_mac_link_82599;
        }
}

static int ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw)
{
        u16 list_offset, data_offset, data_value;
        int ret_val;

        if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) {
                ixgbe_init_mac_link_ops_82599(hw);

                hw->phy.ops.reset = NULL;

                ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset,
                                                              &data_offset);
                if (ret_val)
                        return ret_val;

                /* PHY config will finish before releasing the semaphore */
                ret_val = hw->mac.ops.acquire_swfw_sync(hw,
                                                        IXGBE_GSSR_MAC_CSR_SM);
                if (ret_val)
                        return -EBUSY;

                if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
                        goto setup_sfp_err;
                while (data_value != 0xffff) {
                        IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value);
                        IXGBE_WRITE_FLUSH(hw);
                        if (hw->eeprom.ops.read(hw, ++data_offset, &data_value))
                                goto setup_sfp_err;
                }

                /* Release the semaphore */
                hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
                /*
                 * Delay obtaining semaphore again to allow FW access,
                 * semaphore_delay is in ms usleep_range needs us.
                 */
                usleep_range(hw->eeprom.semaphore_delay * 1000,
                             hw->eeprom.semaphore_delay * 2000);

                /* Restart DSP and set SFI mode */
                ret_val = hw->mac.ops.prot_autoc_write(hw,
                        hw->mac.orig_autoc | IXGBE_AUTOC_LMS_10G_SERIAL,
                        false);

                if (ret_val) {
                        hw_dbg(hw, " sfp module setup not complete\n");
                        return -EIO;
                }
        }

        return 0;

setup_sfp_err:
        /* Release the semaphore */
        hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);
        /* Delay obtaining semaphore again to allow FW access,
         * semaphore_delay is in ms usleep_range needs us.
         */
        usleep_range(hw->eeprom.semaphore_delay * 1000,
                     hw->eeprom.semaphore_delay * 2000);
        hw_err(hw, "eeprom read at offset %d failed\n", data_offset);
        return -EIO;
}

/**
 *  prot_autoc_read_82599 - Hides MAC differences needed for AUTOC read
 *  @hw: pointer to hardware structure
 *  @locked: Return the if we locked for this read.
 *  @reg_val: Value we read from AUTOC
 *
 *  For this part (82599) we need to wrap read-modify-writes with a possible
 *  FW/SW lock.  It is assumed this lock will be freed with the next
 *  prot_autoc_write_82599().  Note, that locked can only be true in cases
 *  where this function doesn't return an error.
 **/
static int prot_autoc_read_82599(struct ixgbe_hw *hw, bool *locked,
                                 u32 *reg_val)
{
        int ret_val;

        *locked = false;
        /* If LESM is on then we need to hold the SW/FW semaphore. */
        if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
                ret_val = hw->mac.ops.acquire_swfw_sync(hw,
                                        IXGBE_GSSR_MAC_CSR_SM);
                if (ret_val)
                        return -EBUSY;

                *locked = true;
        }

        *reg_val = IXGBE_READ_REG(hw, IXGBE_AUTOC);
        return 0;
}

/**
 * prot_autoc_write_82599 - Hides MAC differences needed for AUTOC write
 * @hw: pointer to hardware structure
 * @autoc: value to write to AUTOC
 * @locked: bool to indicate whether the SW/FW lock was already taken by
 *           previous prot_autoc_read_82599.
 *
 * This part (82599) may need to hold a the SW/FW lock around all writes to
 * AUTOC. Likewise after a write we need to do a pipeline reset.
 **/
static int prot_autoc_write_82599(struct ixgbe_hw *hw, u32 autoc, bool locked)
{
        int ret_val = 0;

        /* Blocked by MNG FW so bail */
        if (ixgbe_check_reset_blocked(hw))
                goto out;

        /* We only need to get the lock if:
         *  - We didn't do it already (in the read part of a read-modify-write)
         *  - LESM is enabled.
         */
        if (!locked && ixgbe_verify_lesm_fw_enabled_82599(hw)) {
                ret_val = hw->mac.ops.acquire_swfw_sync(hw,
                                        IXGBE_GSSR_MAC_CSR_SM);
                if (ret_val)
                        return -EBUSY;

                locked = true;
        }

        IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
        ret_val = ixgbe_reset_pipeline_82599(hw);

out:
        /* Free the SW/FW semaphore as we either grabbed it here or
         * already had it when this function was called.
         */
        if (locked)
                hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);

        return ret_val;
}

static int ixgbe_get_invariants_82599(struct ixgbe_hw *hw)
{
        struct ixgbe_mac_info *mac = &hw->mac;

        ixgbe_init_mac_link_ops_82599(hw);

        mac->mcft_size = IXGBE_82599_MC_TBL_SIZE;
        mac->vft_size = IXGBE_82599_VFT_TBL_SIZE;
        mac->num_rar_entries = IXGBE_82599_RAR_ENTRIES;
        mac->rx_pb_size = IXGBE_82599_RX_PB_SIZE;
        mac->max_rx_queues = IXGBE_82599_MAX_RX_QUEUES;
        mac->max_tx_queues = IXGBE_82599_MAX_TX_QUEUES;
        mac->max_msix_vectors = ixgbe_get_pcie_msix_count_generic(hw);

        return 0;
}

/**
 *  ixgbe_init_phy_ops_82599 - PHY/SFP specific init
 *  @hw: pointer to hardware structure
 *
 *  Initialize any function pointers that were not able to be
 *  set during get_invariants because the PHY/SFP type was
 *  not known.  Perform the SFP init if necessary.
 *
 **/
static int ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw)
{
        struct ixgbe_mac_info *mac = &hw->mac;
        struct ixgbe_phy_info *phy = &hw->phy;
        int ret_val;
        u32 esdp;

        if (hw->device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP) {
                /* Store flag indicating I2C bus access control unit. */
                hw->phy.qsfp_shared_i2c_bus = true;

                /* Initialize access to QSFP+ I2C bus */
                esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
                esdp |= IXGBE_ESDP_SDP0_DIR;
                esdp &= ~IXGBE_ESDP_SDP1_DIR;
                esdp &= ~IXGBE_ESDP_SDP0;
                esdp &= ~IXGBE_ESDP_SDP0_NATIVE;
                esdp &= ~IXGBE_ESDP_SDP1_NATIVE;
                IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
                IXGBE_WRITE_FLUSH(hw);

                phy->ops.read_i2c_byte = &ixgbe_read_i2c_byte_82599;
                phy->ops.write_i2c_byte = &ixgbe_write_i2c_byte_82599;
        }

        /* Identify the PHY or SFP module */
        ret_val = phy->ops.identify(hw);

        /* Setup function pointers based on detected SFP module and speeds */
        ixgbe_init_mac_link_ops_82599(hw);

        /* If copper media, overwrite with copper function pointers */
        if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) {
                mac->ops.setup_link = &ixgbe_setup_copper_link_82599;
                mac->ops.get_link_capabilities =
                        &ixgbe_get_copper_link_capabilities_generic;
        }

        /* Set necessary function pointers based on phy type */
        switch (hw->phy.type) {
        case ixgbe_phy_tn:
                phy->ops.check_link = &ixgbe_check_phy_link_tnx;
                phy->ops.setup_link = &ixgbe_setup_phy_link_tnx;
                break;
        default:
                break;
        }

        return ret_val;
}

/**
 *  ixgbe_get_link_capabilities_82599 - Determines link capabilities
 *  @hw: pointer to hardware structure
 *  @speed: pointer to link speed
 *  @autoneg: true when autoneg or autotry is enabled
 *
 *  Determines the link capabilities by reading the AUTOC register.
 **/
static int ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw,
                                             ixgbe_link_speed *speed,
                                             bool *autoneg)
{
        u32 autoc = 0;

        /* Determine 1G link capabilities off of SFP+ type */
        if (hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core0 ||
            hw->phy.sfp_type == ixgbe_sfp_type_1g_cu_core1 ||
            hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 ||
            hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1 ||
            hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 ||
            hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 ||
            hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core0 ||
            hw->phy.sfp_type == ixgbe_sfp_type_1g_bx_core1) {
                *speed = IXGBE_LINK_SPEED_1GB_FULL;
                *autoneg = true;
                return 0;
        }

        if (hw->phy.sfp_type == ixgbe_sfp_type_10g_bx_core0 ||
            hw->phy.sfp_type == ixgbe_sfp_type_10g_bx_core1) {
                *speed = IXGBE_LINK_SPEED_10GB_FULL;
                *autoneg = false;
                return 0;
        }

        /*
         * Determine link capabilities based on the stored value of AUTOC,
         * which represents EEPROM defaults.  If AUTOC value has not been
         * stored, use the current register value.
         */
        if (hw->mac.orig_link_settings_stored)
                autoc = hw->mac.orig_autoc;
        else
                autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);

        switch (autoc & IXGBE_AUTOC_LMS_MASK) {
        case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
                *speed = IXGBE_LINK_SPEED_1GB_FULL;
                *autoneg = false;
                break;

        case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
                *speed = IXGBE_LINK_SPEED_10GB_FULL;
                *autoneg = false;
                break;

        case IXGBE_AUTOC_LMS_1G_AN:
                *speed = IXGBE_LINK_SPEED_1GB_FULL;
                *autoneg = true;
                break;

        case IXGBE_AUTOC_LMS_10G_SERIAL:
                *speed = IXGBE_LINK_SPEED_10GB_FULL;
                *autoneg = false;
                break;

        case IXGBE_AUTOC_LMS_KX4_KX_KR:
        case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN:
                *speed = IXGBE_LINK_SPEED_UNKNOWN;
                if (autoc & IXGBE_AUTOC_KR_SUPP)
                        *speed |= IXGBE_LINK_SPEED_10GB_FULL;
                if (autoc & IXGBE_AUTOC_KX4_SUPP)
                        *speed |= IXGBE_LINK_SPEED_10GB_FULL;
                if (autoc & IXGBE_AUTOC_KX_SUPP)
                        *speed |= IXGBE_LINK_SPEED_1GB_FULL;
                *autoneg = true;
                break;

        case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII:
                *speed = IXGBE_LINK_SPEED_100_FULL;
                if (autoc & IXGBE_AUTOC_KR_SUPP)
                        *speed |= IXGBE_LINK_SPEED_10GB_FULL;
                if (autoc & IXGBE_AUTOC_KX4_SUPP)
                        *speed |= IXGBE_LINK_SPEED_10GB_FULL;
                if (autoc & IXGBE_AUTOC_KX_SUPP)
                        *speed |= IXGBE_LINK_SPEED_1GB_FULL;
                *autoneg = true;
                break;

        case IXGBE_AUTOC_LMS_SGMII_1G_100M:
                *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL;
                *autoneg = false;
                break;

        default:
                return -EIO;
        }

        if (hw->phy.multispeed_fiber) {
                *speed |= IXGBE_LINK_SPEED_10GB_FULL |
                          IXGBE_LINK_SPEED_1GB_FULL;

                /* QSFP must not enable auto-negotiation */
                if (hw->phy.media_type == ixgbe_media_type_fiber_qsfp)
                        *autoneg = false;
                else
                        *autoneg = true;
        }

        return 0;
}

/**
 *  ixgbe_get_media_type_82599 - Get media type
 *  @hw: pointer to hardware structure
 *
 *  Returns the media type (fiber, copper, backplane)
 **/
static enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw)
{
        /* Detect if there is a copper PHY attached. */
        switch (hw->phy.type) {
        case ixgbe_phy_cu_unknown:
        case ixgbe_phy_tn:
                return ixgbe_media_type_copper;

        default:
                break;
        }

        switch (hw->device_id) {
        case IXGBE_DEV_ID_82599_KX4:
        case IXGBE_DEV_ID_82599_KX4_MEZZ:
        case IXGBE_DEV_ID_82599_COMBO_BACKPLANE:
        case IXGBE_DEV_ID_82599_KR:
        case IXGBE_DEV_ID_82599_BACKPLANE_FCOE:
        case IXGBE_DEV_ID_82599_XAUI_LOM:
                /* Default device ID is mezzanine card KX/KX4 */
                return ixgbe_media_type_backplane;

        case IXGBE_DEV_ID_82599_SFP:
        case IXGBE_DEV_ID_82599_SFP_FCOE:
        case IXGBE_DEV_ID_82599_SFP_EM:
        case IXGBE_DEV_ID_82599_SFP_SF2:
        case IXGBE_DEV_ID_82599_SFP_SF_QP:
        case IXGBE_DEV_ID_82599EN_SFP:
                return ixgbe_media_type_fiber;

        case IXGBE_DEV_ID_82599_CX4:
                return ixgbe_media_type_cx4;

        case IXGBE_DEV_ID_82599_T3_LOM:
                return ixgbe_media_type_copper;

        case IXGBE_DEV_ID_82599_LS:
                return ixgbe_media_type_fiber_lco;

        case IXGBE_DEV_ID_82599_QSFP_SF_QP:
                return ixgbe_media_type_fiber_qsfp;

        default:
                return ixgbe_media_type_unknown;
        }
}

/**
 * ixgbe_stop_mac_link_on_d3_82599 - Disables link on D3
 * @hw: pointer to hardware structure
 *
 * Disables link, should be called during D3 power down sequence.
 *
 **/
static void ixgbe_stop_mac_link_on_d3_82599(struct ixgbe_hw *hw)
{
        u32 autoc2_reg;
        u16 ee_ctrl_2 = 0;

        hw->eeprom.ops.read(hw, IXGBE_EEPROM_CTRL_2, &ee_ctrl_2);

        if (!ixgbe_mng_present(hw) && !hw->wol_enabled &&
            ee_ctrl_2 & IXGBE_EEPROM_CCD_BIT) {
                autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
                autoc2_reg |= IXGBE_AUTOC2_LINK_DISABLE_ON_D3_MASK;
                IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
        }
}

/**
 *  ixgbe_start_mac_link_82599 - Setup MAC link settings
 *  @hw: pointer to hardware structure
 *  @autoneg_wait_to_complete: true when waiting for completion is needed
 *
 *  Configures link settings based on values in the ixgbe_hw struct.
 *  Restarts the link.  Performs autonegotiation if needed.
 **/
static int ixgbe_start_mac_link_82599(struct ixgbe_hw *hw,
                                      bool autoneg_wait_to_complete)
{
        bool got_lock = false;
        int status = 0;
        u32 autoc_reg;
        u32 links_reg;
        u32 i;

        if (ixgbe_verify_lesm_fw_enabled_82599(hw)) {
                status = hw->mac.ops.acquire_swfw_sync(hw,
                                                IXGBE_GSSR_MAC_CSR_SM);
                if (status)
                        return status;

                got_lock = true;
        }

        /* Restart link */
        ixgbe_reset_pipeline_82599(hw);

        if (got_lock)
                hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_MAC_CSR_SM);

        /* Only poll for autoneg to complete if specified to do so */
        if (autoneg_wait_to_complete) {
                autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
                if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
                     IXGBE_AUTOC_LMS_KX4_KX_KR ||
                    (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
                     IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
                    (autoc_reg & IXGBE_AUTOC_LMS_MASK) ==
                     IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
                        links_reg = 0; /* Just in case Autoneg time = 0 */
                        for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
                                links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
                                if (links_reg & IXGBE_LINKS_KX_AN_COMP)
                                        break;
                                msleep(100);
                        }
                        if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
                                status = -EIO;
                                hw_dbg(hw, "Autoneg did not complete.\n");
                        }
                }
        }

        /* Add delay to filter out noises during initial link setup */
        msleep(50);

        return status;
}

/**
 *  ixgbe_disable_tx_laser_multispeed_fiber - Disable Tx laser
 *  @hw: pointer to hardware structure
 *
 *  The base drivers may require better control over SFP+ module
 *  PHY states.  This includes selectively shutting down the Tx
 *  laser on the PHY, effectively halting physical link.
 **/
static void ixgbe_disable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
{
        u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);

        /* Blocked by MNG FW so bail */
        if (ixgbe_check_reset_blocked(hw))
                return;

        /* Disable tx laser; allow 100us to go dark per spec */
        esdp_reg |= IXGBE_ESDP_SDP3;
        IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
        IXGBE_WRITE_FLUSH(hw);
        udelay(100);
}

/**
 *  ixgbe_enable_tx_laser_multispeed_fiber - Enable Tx laser
 *  @hw: pointer to hardware structure
 *
 *  The base drivers may require better control over SFP+ module
 *  PHY states.  This includes selectively turning on the Tx
 *  laser on the PHY, effectively starting physical link.
 **/
static void ixgbe_enable_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
{
        u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);

        /* Enable tx laser; allow 100ms to light up */
        esdp_reg &= ~IXGBE_ESDP_SDP3;
        IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
        IXGBE_WRITE_FLUSH(hw);
        msleep(100);
}

/**
 *  ixgbe_flap_tx_laser_multispeed_fiber - Flap Tx laser
 *  @hw: pointer to hardware structure
 *
 *  When the driver changes the link speeds that it can support,
 *  it sets autotry_restart to true to indicate that we need to
 *  initiate a new autotry session with the link partner.  To do
 *  so, we set the speed then disable and re-enable the tx laser, to
 *  alert the link partner that it also needs to restart autotry on its
 *  end.  This is consistent with true clause 37 autoneg, which also
 *  involves a loss of signal.
 **/
static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw)
{
        /* Blocked by MNG FW so bail */
        if (ixgbe_check_reset_blocked(hw))
                return;

        if (hw->mac.autotry_restart) {
                ixgbe_disable_tx_laser_multispeed_fiber(hw);
                ixgbe_enable_tx_laser_multispeed_fiber(hw);
                hw->mac.autotry_restart = false;
        }
}

/**
 * ixgbe_set_hard_rate_select_speed - Set module link speed
 * @hw: pointer to hardware structure
 * @speed: link speed to set
 *
 * Set module link speed via RS0/RS1 rate select pins.
 */
static void
ixgbe_set_hard_rate_select_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed)
{
        u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP);

        switch (speed) {
        case IXGBE_LINK_SPEED_10GB_FULL:
                esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5);
                break;
        case IXGBE_LINK_SPEED_1GB_FULL:
                esdp_reg &= ~IXGBE_ESDP_SDP5;
                esdp_reg |= IXGBE_ESDP_SDP5_DIR;
                break;
        default:
                hw_dbg(hw, "Invalid fixed module speed\n");
                return;
        }

        IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg);
        IXGBE_WRITE_FLUSH(hw);
}

/**
 *  ixgbe_setup_mac_link_smartspeed - Set MAC link speed using SmartSpeed
 *  @hw: pointer to hardware structure
 *  @speed: new link speed
 *  @autoneg_wait_to_complete: true when waiting for completion is needed
 *
 *  Implements the Intel SmartSpeed algorithm.
 **/
static int ixgbe_setup_mac_link_smartspeed(struct ixgbe_hw *hw,
                                           ixgbe_link_speed speed,
                                           bool autoneg_wait_to_complete)
{
        ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_UNKNOWN;
        u32 autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
        bool link_up = false;
        int status = 0;
        s32 i, j;

         /* Set autoneg_advertised value based on input link speed */
        hw->phy.autoneg_advertised = 0;

        if (speed & IXGBE_LINK_SPEED_10GB_FULL)
                hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;

        if (speed & IXGBE_LINK_SPEED_1GB_FULL)
                hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;

        if (speed & IXGBE_LINK_SPEED_100_FULL)
                hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_100_FULL;

        /*
         * Implement Intel SmartSpeed algorithm.  SmartSpeed will reduce the
         * autoneg advertisement if link is unable to be established at the
         * highest negotiated rate.  This can sometimes happen due to integrity
         * issues with the physical media connection.
         */

        /* First, try to get link with full advertisement */
        hw->phy.smart_speed_active = false;
        for (j = 0; j < IXGBE_SMARTSPEED_MAX_RETRIES; j++) {
                status = ixgbe_setup_mac_link_82599(hw, speed,
                                                    autoneg_wait_to_complete);
                if (status != 0)
                        goto out;

                /*
                 * Wait for the controller to acquire link.  Per IEEE 802.3ap,
                 * Section 73.10.2, we may have to wait up to 500ms if KR is
                 * attempted, or 200ms if KX/KX4/BX/BX4 is attempted, per
                 * Table 9 in the AN MAS.
                 */
                for (i = 0; i < 5; i++) {
                        mdelay(100);

                        /* If we have link, just jump out */
                        status = hw->mac.ops.check_link(hw, &link_speed,
                                                        &link_up, false);
                        if (status != 0)
                                goto out;

                        if (link_up)
                                goto out;
                }
        }

        /*
         * We didn't get link.  If we advertised KR plus one of KX4/KX
         * (or BX4/BX), then disable KR and try again.
         */
        if (((autoc_reg & IXGBE_AUTOC_KR_SUPP) == 0) ||
            ((autoc_reg & IXGBE_AUTOC_KX4_KX_SUPP_MASK) == 0))
                goto out;

        /* Turn SmartSpeed on to disable KR support */
        hw->phy.smart_speed_active = true;
        status = ixgbe_setup_mac_link_82599(hw, speed,
                                            autoneg_wait_to_complete);
        if (status != 0)
                goto out;

        /*
         * Wait for the controller to acquire link.  600ms will allow for
         * the AN link_fail_inhibit_timer as well for multiple cycles of
         * parallel detect, both 10g and 1g. This allows for the maximum
         * connect attempts as defined in the AN MAS table 73-7.
         */
        for (i = 0; i < 6; i++) {
                mdelay(100);

                /* If we have link, just jump out */
                status = hw->mac.ops.check_link(hw, &link_speed,
                                                &link_up, false);
                if (status != 0)
                        goto out;

                if (link_up)
                        goto out;
        }

        /* We didn't get link.  Turn SmartSpeed back off. */
        hw->phy.smart_speed_active = false;
        status = ixgbe_setup_mac_link_82599(hw, speed,
                                            autoneg_wait_to_complete);

out:
        if (link_up && (link_speed == IXGBE_LINK_SPEED_1GB_FULL))
                hw_dbg(hw, "Smartspeed has downgraded the link speed from the maximum advertised\n");
        return status;
}

/**
 *  ixgbe_setup_mac_link_82599 - Set MAC link speed
 *  @hw: pointer to hardware structure
 *  @speed: new link speed
 *  @autoneg_wait_to_complete: true when waiting for completion is needed
 *
 *  Set the link speed in the AUTOC register and restarts link.
 **/
static int ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw,
                                      ixgbe_link_speed speed,
                                      bool autoneg_wait_to_complete)
{
        ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN;
        u32 pma_pmd_10g_serial, pma_pmd_1g, link_mode, links_reg, i;
        u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
        bool autoneg = false;
        int status;

        /* holds the value of AUTOC register at this current point in time */
        u32 current_autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
        /* holds the cached value of AUTOC register */
        u32 orig_autoc = 0;
        /* temporary variable used for comparison purposes */
        u32 autoc = current_autoc;

        pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK;

        /* Check to see if speed passed in is supported. */
        status = hw->mac.ops.get_link_capabilities(hw, &link_capabilities,
                                                   &autoneg);
        if (status)
                return status;

        speed &= link_capabilities;

        if (speed == IXGBE_LINK_SPEED_UNKNOWN)
                return -EINVAL;

        /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/
        if (hw->mac.orig_link_settings_stored)
                orig_autoc = hw->mac.orig_autoc;
        else
                orig_autoc = autoc;

        link_mode = autoc & IXGBE_AUTOC_LMS_MASK;
        pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK;

        if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
            link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
            link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
                /* Set KX4/KX/KR support according to speed requested */
                autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP);
                if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
                        if (orig_autoc & IXGBE_AUTOC_KX4_SUPP)
                                autoc |= IXGBE_AUTOC_KX4_SUPP;
                        if ((orig_autoc & IXGBE_AUTOC_KR_SUPP) &&
                            (hw->phy.smart_speed_active == false))
                                autoc |= IXGBE_AUTOC_KR_SUPP;
                }
                if (speed & IXGBE_LINK_SPEED_1GB_FULL)
                        autoc |= IXGBE_AUTOC_KX_SUPP;
        } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) &&
                   (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN ||
                    link_mode == IXGBE_AUTOC_LMS_1G_AN)) {
                /* Switch from 1G SFI to 10G SFI if requested */
                if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
                    (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) {
                        autoc &= ~IXGBE_AUTOC_LMS_MASK;
                        autoc |= IXGBE_AUTOC_LMS_10G_SERIAL;
                }
        } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) &&
                   (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) {
                /* Switch from 10G SFI to 1G SFI if requested */
                if ((speed == IXGBE_LINK_SPEED_1GB_FULL) &&
                    (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) {
                        autoc &= ~IXGBE_AUTOC_LMS_MASK;
                        if (autoneg)
                                autoc |= IXGBE_AUTOC_LMS_1G_AN;
                        else
                                autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
                }
        }

        if (autoc != current_autoc) {
                /* Restart link */
                status = hw->mac.ops.prot_autoc_write(hw, autoc, false);
                if (status)
                        return status;

                /* Only poll for autoneg to complete if specified to do so */
                if (autoneg_wait_to_complete) {
                        if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR ||
                            link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN ||
                            link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) {
                                links_reg = 0; /*Just in case Autoneg time=0*/
                                for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
                                        links_reg =
                                               IXGBE_READ_REG(hw, IXGBE_LINKS);
                                        if (links_reg & IXGBE_LINKS_KX_AN_COMP)
                                                break;
                                        msleep(100);
                                }
                                if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
                                        status = -EIO;
                                        hw_dbg(hw, "Autoneg did not complete.\n");
                                }
                        }
                }

                /* Add delay to filter out noises during initial link setup */
                msleep(50);
        }

        return status;
}

/**
 *  ixgbe_setup_copper_link_82599 - Set the PHY autoneg advertised field
 *  @hw: pointer to hardware structure
 *  @speed: new link speed
 *  @autoneg_wait_to_complete: true if waiting is needed to complete
 *
 *  Restarts link on PHY and MAC based on settings passed in.
 **/
static int ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw,
                                         ixgbe_link_speed speed,
                                         bool autoneg_wait_to_complete)
{
        int status;

        /* Setup the PHY according to input speed */
        status = hw->phy.ops.setup_link_speed(hw, speed,
                                              autoneg_wait_to_complete);
        /* Set up MAC */
        ixgbe_start_mac_link_82599(hw, autoneg_wait_to_complete);

        return status;
}

/**
 *  ixgbe_reset_hw_82599 - Perform hardware reset
 *  @hw: pointer to hardware structure
 *
 *  Resets the hardware by resetting the transmit and receive units, masks
 *  and clears all interrupts, perform a PHY reset, and perform a link (MAC)
 *  reset.
 **/
static int ixgbe_reset_hw_82599(struct ixgbe_hw *hw)
{
        ixgbe_link_speed link_speed;
        u32 ctrl, i, autoc, autoc2;
        bool link_up = false;
        u32 curr_lms;
        int status;

        /* Call adapter stop to disable tx/rx and clear interrupts */
        status = hw->mac.ops.stop_adapter(hw);
        if (status)
                return status;

        /* flush pending Tx transactions */
        ixgbe_clear_tx_pending(hw);

        /* PHY ops must be identified and initialized prior to reset */

        /* Identify PHY and related function pointers */
        status = hw->phy.ops.init(hw);

        if (status == -EOPNOTSUPP)
                return status;

        /* Setup SFP module if there is one present. */
        if (hw->phy.sfp_setup_needed) {
                status = hw->mac.ops.setup_sfp(hw);
                hw->phy.sfp_setup_needed = false;
        }

        if (status == -EOPNOTSUPP)
                return status;

        /* Reset PHY */
        if (hw->phy.reset_disable == false && hw->phy.ops.reset != NULL)
                hw->phy.ops.reset(hw);

        /* remember AUTOC from before we reset */
        curr_lms = IXGBE_READ_REG(hw, IXGBE_AUTOC) & IXGBE_AUTOC_LMS_MASK;

mac_reset_top:
        /*
         * Issue global reset to the MAC. Needs to be SW reset if link is up.
         * If link reset is used when link is up, it might reset the PHY when
         * mng is using it.  If link is down or the flag to force full link
         * reset is set, then perform link reset.
         */
        ctrl = IXGBE_CTRL_LNK_RST;
        if (!hw->force_full_reset) {
                hw->mac.ops.check_link(hw, &link_speed, &link_up, false);
                if (link_up)
                        ctrl = IXGBE_CTRL_RST;
        }

        ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL);
        IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
        IXGBE_WRITE_FLUSH(hw);
        usleep_range(1000, 1200);

        /* Poll for reset bit to self-clear indicating reset is complete */
        for (i = 0; i < 10; i++) {
                ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
                if (!(ctrl & IXGBE_CTRL_RST_MASK))
                        break;
                udelay(1);
        }

        if (ctrl & IXGBE_CTRL_RST_MASK) {
                status = -EIO;
                hw_dbg(hw, "Reset polling failed to complete.\n");
        }

        msleep(50);

        /*
         * Double resets are required for recovery from certain error
         * conditions.  Between resets, it is necessary to stall to allow time
         * for any pending HW events to complete.
         */
        if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) {
                hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED;
                goto mac_reset_top;
        }

        /*
         * Store the original AUTOC/AUTOC2 values if they have not been
         * stored off yet.  Otherwise restore the stored original
         * values since the reset operation sets back to defaults.
         */
        autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
        autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2);

        /* Enable link if disabled in NVM */
        if (autoc2 & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
                autoc2 &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
                IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
                IXGBE_WRITE_FLUSH(hw);
        }

        if (hw->mac.orig_link_settings_stored == false) {
                hw->mac.orig_autoc = autoc;
                hw->mac.orig_autoc2 = autoc2;
                hw->mac.orig_link_settings_stored = true;
        } else {

                /* If MNG FW is running on a multi-speed device that
                 * doesn't autoneg with out driver support we need to
                 * leave LMS in the state it was before we MAC reset.
                 * Likewise if we support WoL we don't want change the
                 * LMS state either.
                 */
                if ((hw->phy.multispeed_fiber && ixgbe_mng_enabled(hw)) ||
                    hw->wol_enabled)
                        hw->mac.orig_autoc =
                                (hw->mac.orig_autoc & ~IXGBE_AUTOC_LMS_MASK) |
                                curr_lms;

                if (autoc != hw->mac.orig_autoc) {
                        status = hw->mac.ops.prot_autoc_write(hw,
                                                        hw->mac.orig_autoc,
                                                        false);
                        if (status)
                                return status;
                }

                if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) !=
                    (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) {
                        autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK;
                        autoc2 |= (hw->mac.orig_autoc2 &
                                   IXGBE_AUTOC2_UPPER_MASK);
                        IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2);
                }
        }

        /* Store the permanent mac address */
        hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr);

        /*
         * Store MAC address from RAR0, clear receive address registers, and
         * clear the multicast table.  Also reset num_rar_entries to 128,
         * since we modify this value when programming the SAN MAC address.
         */
        hw->mac.num_rar_entries = IXGBE_82599_RAR_ENTRIES;
        hw->mac.ops.init_rx_addrs(hw);

        /* Store the permanent SAN mac address */
        hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr);

        /* Add the SAN MAC address to the RAR only if it's a valid address */
        if (is_valid_ether_addr(hw->mac.san_addr)) {
                /* Save the SAN MAC RAR index */
                hw->mac.san_mac_rar_index = hw->mac.num_rar_entries - 1;

                hw->mac.ops.set_rar(hw, hw->mac.san_mac_rar_index,
                                    hw->mac.san_addr, 0, IXGBE_RAH_AV);

                /* clear VMDq pool/queue selection for this RAR */
                hw->mac.ops.clear_vmdq(hw, hw->mac.san_mac_rar_index,
                                       IXGBE_CLEAR_VMDQ_ALL);

                /* Reserve the last RAR for the SAN MAC address */
                hw->mac.num_rar_entries--;
        }

        /* Store the alternative WWNN/WWPN prefix */
        hw->mac.ops.get_wwn_prefix(hw, &hw->mac.wwnn_prefix,
                                       &hw->mac.wwpn_prefix);

        return status;
}

/**
 * ixgbe_fdir_check_cmd_complete - poll to check whether FDIRCMD is complete
 * @hw: pointer to hardware structure
 * @fdircmd: current value of FDIRCMD register
 */
static int ixgbe_fdir_check_cmd_complete(struct ixgbe_hw *hw, u32 *fdircmd)
{
        int i;

        for (i = 0; i < IXGBE_FDIRCMD_CMD_POLL; i++) {
                *fdircmd = IXGBE_READ_REG(hw, IXGBE_FDIRCMD);
                if (!(*fdircmd & IXGBE_FDIRCMD_CMD_MASK))
                        return 0;
                udelay(10);
        }

        return -EIO;
}

/**
 *  ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables.
 *  @hw: pointer to hardware structure
 **/
int ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw)
{
        u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL);
        u32 fdircmd;
        int err;
        int i;

        fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE;

        /*
         * Before starting reinitialization process,
         * FDIRCMD.CMD must be zero.
         */
        err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
        if (err) {
                hw_dbg(hw, "Flow Director previous command did not complete, aborting table re-initialization.\n");
                return err;
        }

        IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0);
        IXGBE_WRITE_FLUSH(hw);
        /*
         * 82599 adapters flow director init flow cannot be restarted,
         * Workaround 82599 silicon errata by performing the following steps
         * before re-writing the FDIRCTRL control register with the same value.
         * - write 1 to bit 8 of FDIRCMD register &
         * - write 0 to bit 8 of FDIRCMD register
         */
        IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
                        (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) |
                         IXGBE_FDIRCMD_CLEARHT));
        IXGBE_WRITE_FLUSH(hw);
        IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
                        (IXGBE_READ_REG(hw, IXGBE_FDIRCMD) &
                         ~IXGBE_FDIRCMD_CLEARHT));
        IXGBE_WRITE_FLUSH(hw);
        /*
         * Clear FDIR Hash register to clear any leftover hashes
         * waiting to be programmed.
         */
        IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, 0x00);
        IXGBE_WRITE_FLUSH(hw);

        IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
        IXGBE_WRITE_FLUSH(hw);

        /* Poll init-done after we write FDIRCTRL register */
        for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
                if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
                                   IXGBE_FDIRCTRL_INIT_DONE)
                        break;
                usleep_range(1000, 2000);
        }
        if (i >= IXGBE_FDIR_INIT_DONE_POLL) {
                hw_dbg(hw, "Flow Director Signature poll time exceeded!\n");
                return -EIO;
        }

        /* Clear FDIR statistics registers (read to clear) */
        IXGBE_READ_REG(hw, IXGBE_FDIRUSTAT);
        IXGBE_READ_REG(hw, IXGBE_FDIRFSTAT);
        IXGBE_READ_REG(hw, IXGBE_FDIRMATCH);
        IXGBE_READ_REG(hw, IXGBE_FDIRMISS);
        IXGBE_READ_REG(hw, IXGBE_FDIRLEN);

        return 0;
}

/**
 *  ixgbe_fdir_enable_82599 - Initialize Flow Director control registers
 *  @hw: pointer to hardware structure
 *  @fdirctrl: value to write to flow director control register
 **/
static void ixgbe_fdir_enable_82599(struct ixgbe_hw *hw, u32 fdirctrl)
{
        int i;

        /* Prime the keys for hashing */
        IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, IXGBE_ATR_BUCKET_HASH_KEY);
        IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, IXGBE_ATR_SIGNATURE_HASH_KEY);

        /*
         * Poll init-done after we write the register.  Estimated times:
         *      10G: PBALLOC = 11b, timing is 60us
         *       1G: PBALLOC = 11b, timing is 600us
         *     100M: PBALLOC = 11b, timing is 6ms
         *
         *     Multiple these timings by 4 if under full Rx load
         *
         * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for
         * 1 msec per poll time.  If we're at line rate and drop to 100M, then
         * this might not finish in our poll time, but we can live with that
         * for now.
         */
        IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl);
        IXGBE_WRITE_FLUSH(hw);
        for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) {
                if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) &
                                   IXGBE_FDIRCTRL_INIT_DONE)
                        break;
                usleep_range(1000, 2000);
        }

        if (i >= IXGBE_FDIR_INIT_DONE_POLL)
                hw_dbg(hw, "Flow Director poll time exceeded!\n");
}

/**
 *  ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters
 *  @hw: pointer to hardware structure
 *  @fdirctrl: value to write to flow director control register, initially
 *             contains just the value of the Rx packet buffer allocation
 **/
int ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 fdirctrl)
{
        /*
         * Continue setup of fdirctrl register bits:
         *  Move the flexible bytes to use the ethertype - shift 6 words
         *  Set the maximum length per hash bucket to 0xA filters
         *  Send interrupt when 64 filters are left
         */
        fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
                    (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
                    (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);

        /* write hashes and fdirctrl register, poll for completion */
        ixgbe_fdir_enable_82599(hw, fdirctrl);

        return 0;
}

/**
 *  ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters
 *  @hw: pointer to hardware structure
 *  @fdirctrl: value to write to flow director control register, initially
 *             contains just the value of the Rx packet buffer allocation
 **/
int ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 fdirctrl)
{
        /*
         * Continue setup of fdirctrl register bits:
         *  Turn perfect match filtering on
         *  Initialize the drop queue
         *  Move the flexible bytes to use the ethertype - shift 6 words
         *  Set the maximum length per hash bucket to 0xA filters
         *  Send interrupt when 64 (0x4 * 16) filters are left
         */
        fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH |
                    (IXGBE_FDIR_DROP_QUEUE << IXGBE_FDIRCTRL_DROP_Q_SHIFT) |
                    (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT) |
                    (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT) |
                    (4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT);

        /* write hashes and fdirctrl register, poll for completion */
        ixgbe_fdir_enable_82599(hw, fdirctrl);

        return 0;
}

/*
 * These defines allow us to quickly generate all of the necessary instructions
 * in the function below by simply calling out IXGBE_COMPUTE_SIG_HASH_ITERATION
 * for values 0 through 15
 */
#define IXGBE_ATR_COMMON_HASH_KEY \
                (IXGBE_ATR_BUCKET_HASH_KEY & IXGBE_ATR_SIGNATURE_HASH_KEY)
#define IXGBE_COMPUTE_SIG_HASH_ITERATION(_n) \
do { \
        u32 n = (_n); \
        if (IXGBE_ATR_COMMON_HASH_KEY & BIT(n)) \
                common_hash ^= lo_hash_dword >> n; \
        else if (IXGBE_ATR_BUCKET_HASH_KEY & BIT(n)) \
                bucket_hash ^= lo_hash_dword >> n; \
        else if (IXGBE_ATR_SIGNATURE_HASH_KEY & BIT(n)) \
                sig_hash ^= lo_hash_dword << (16 - n); \
        if (IXGBE_ATR_COMMON_HASH_KEY & BIT(n + 16)) \
                common_hash ^= hi_hash_dword >> n; \
        else if (IXGBE_ATR_BUCKET_HASH_KEY & BIT(n + 16)) \
                bucket_hash ^= hi_hash_dword >> n; \
        else if (IXGBE_ATR_SIGNATURE_HASH_KEY & BIT(n + 16)) \
                sig_hash ^= hi_hash_dword << (16 - n); \
} while (0)

/**
 *  ixgbe_atr_compute_sig_hash_82599 - Compute the signature hash
 *  @input: input bitstream to compute the hash on
 *  @common: compressed common input dword
 *
 *  This function is almost identical to the function above but contains
 *  several optimizations such as unwinding all of the loops, letting the
 *  compiler work out all of the conditional ifs since the keys are static
 *  defines, and computing two keys at once since the hashed dword stream
 *  will be the same for both keys.
 **/
static u32 ixgbe_atr_compute_sig_hash_82599(union ixgbe_atr_hash_dword input,
                                            union ixgbe_atr_hash_dword common)
{
        u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
        u32 sig_hash = 0, bucket_hash = 0, common_hash = 0;

        /* record the flow_vm_vlan bits as they are a key part to the hash */
        flow_vm_vlan = ntohl(input.dword);

        /* generate common hash dword */
        hi_hash_dword = ntohl(common.dword);

        /* low dword is word swapped version of common */
        lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);

        /* apply flow ID/VM pool/VLAN ID bits to hash words */
        hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);

        /* Process bits 0 and 16 */
        IXGBE_COMPUTE_SIG_HASH_ITERATION(0);

        /*
         * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
         * delay this because bit 0 of the stream should not be processed
         * so we do not add the vlan until after bit 0 was processed
         */
        lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);

        /* Process remaining 30 bit of the key */
        IXGBE_COMPUTE_SIG_HASH_ITERATION(1);
        IXGBE_COMPUTE_SIG_HASH_ITERATION(2);
        IXGBE_COMPUTE_SIG_HASH_ITERATION(3);
        IXGBE_COMPUTE_SIG_HASH_ITERATION(4);
        IXGBE_COMPUTE_SIG_HASH_ITERATION(5);
        IXGBE_COMPUTE_SIG_HASH_ITERATION(6);
        IXGBE_COMPUTE_SIG_HASH_ITERATION(7);
        IXGBE_COMPUTE_SIG_HASH_ITERATION(8);
        IXGBE_COMPUTE_SIG_HASH_ITERATION(9);
        IXGBE_COMPUTE_SIG_HASH_ITERATION(10);
        IXGBE_COMPUTE_SIG_HASH_ITERATION(11);
        IXGBE_COMPUTE_SIG_HASH_ITERATION(12);
        IXGBE_COMPUTE_SIG_HASH_ITERATION(13);
        IXGBE_COMPUTE_SIG_HASH_ITERATION(14);
        IXGBE_COMPUTE_SIG_HASH_ITERATION(15);

        /* combine common_hash result with signature and bucket hashes */
        bucket_hash ^= common_hash;
        bucket_hash &= IXGBE_ATR_HASH_MASK;

        sig_hash ^= common_hash << 16;
        sig_hash &= IXGBE_ATR_HASH_MASK << 16;

        /* return completed signature hash */
        return sig_hash ^ bucket_hash;
}

/**
 *  ixgbe_fdir_add_signature_filter_82599 - Adds a signature hash filter
 *  @hw: pointer to hardware structure
 *  @input: unique input dword
 *  @common: compressed common input dword
 *  @queue: queue index to direct traffic to
 *
 * Note that the tunnel bit in input must not be set when the hardware
 * tunneling support does not exist.
 **/
int ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw,
                                          union ixgbe_atr_hash_dword input,
                                          union ixgbe_atr_hash_dword common,
                                          u8 queue)
{
        u64 fdirhashcmd;
        u8 flow_type;
        bool tunnel;
        u32 fdircmd;

        /*
         * Get the flow_type in order to program FDIRCMD properly
         * lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6
         */
        tunnel = !!(input.formatted.flow_type & IXGBE_ATR_L4TYPE_TUNNEL_MASK);
        flow_type = input.formatted.flow_type &
                    (IXGBE_ATR_L4TYPE_TUNNEL_MASK - 1);
        switch (flow_type) {
        case IXGBE_ATR_FLOW_TYPE_TCPV4:
        case IXGBE_ATR_FLOW_TYPE_UDPV4:
        case IXGBE_ATR_FLOW_TYPE_SCTPV4:
        case IXGBE_ATR_FLOW_TYPE_TCPV6:
        case IXGBE_ATR_FLOW_TYPE_UDPV6:
        case IXGBE_ATR_FLOW_TYPE_SCTPV6:
                break;
        default:
                hw_dbg(hw, " Error on flow type input\n");
                return -EIO;
        }

        /* configure FDIRCMD register */
        fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
                  IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
        fdircmd |= (u32)flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
        fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
        if (tunnel)
                fdircmd |= IXGBE_FDIRCMD_TUNNEL_FILTER;

        /*
         * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits
         * is for FDIRCMD.  Then do a 64-bit register write from FDIRHASH.
         */
        fdirhashcmd = (u64)fdircmd << 32;
        fdirhashcmd |= ixgbe_atr_compute_sig_hash_82599(input, common);
        IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd);

        hw_dbg(hw, "Tx Queue=%x hash=%x\n", queue, (u32)fdirhashcmd);

        return 0;
}

#define IXGBE_COMPUTE_BKT_HASH_ITERATION(_n) \
do { \
        u32 n = (_n); \
        if (IXGBE_ATR_BUCKET_HASH_KEY & BIT(n)) \
                bucket_hash ^= lo_hash_dword >> n; \
        if (IXGBE_ATR_BUCKET_HASH_KEY & BIT(n + 16)) \
                bucket_hash ^= hi_hash_dword >> n; \
} while (0)

/**
 *  ixgbe_atr_compute_perfect_hash_82599 - Compute the perfect filter hash
 *  @input: input bitstream to compute the hash on
 *  @input_mask: mask for the input bitstream
 *
 *  This function serves two main purposes.  First it applies the input_mask
 *  to the atr_input resulting in a cleaned up atr_input data stream.
 *  Secondly it computes the hash and stores it in the bkt_hash field at
 *  the end of the input byte stream.  This way it will be available for
 *  future use without needing to recompute the hash.
 **/
void ixgbe_atr_compute_perfect_hash_82599(union ixgbe_atr_input *input,
                                          union ixgbe_atr_input *input_mask)
{

        u32 hi_hash_dword, lo_hash_dword, flow_vm_vlan;
        u32 bucket_hash = 0;
        __be32 hi_dword = 0;
        int i;

        /* Apply masks to input data */
        for (i = 0; i <= 10; i++)
                input->dword_stream[i] &= input_mask->dword_stream[i];

        /* record the flow_vm_vlan bits as they are a key part to the hash */
        flow_vm_vlan = ntohl(input->dword_stream[0]);

        /* generate common hash dword */
        for (i = 1; i <= 10; i++)
                hi_dword ^= input->dword_stream[i];
        hi_hash_dword = ntohl(hi_dword);

        /* low dword is word swapped version of common */
        lo_hash_dword = (hi_hash_dword >> 16) | (hi_hash_dword << 16);

        /* apply flow ID/VM pool/VLAN ID bits to hash words */
        hi_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan >> 16);

        /* Process bits 0 and 16 */
        IXGBE_COMPUTE_BKT_HASH_ITERATION(0);

        /*
         * apply flow ID/VM pool/VLAN ID bits to lo hash dword, we had to
         * delay this because bit 0 of the stream should not be processed
         * so we do not add the vlan until after bit 0 was processed
         */
        lo_hash_dword ^= flow_vm_vlan ^ (flow_vm_vlan << 16);

        /* Process remaining 30 bit of the key */
        for (i = 1; i <= 15; i++)
                IXGBE_COMPUTE_BKT_HASH_ITERATION(i);

        /*
         * Limit hash to 13 bits since max bucket count is 8K.
         * Store result at the end of the input stream.
         */
        input->formatted.bkt_hash = (__force __be16)(bucket_hash & 0x1FFF);
}

/**
 *  ixgbe_get_fdirtcpm_82599 - generate a tcp port from atr_input_masks
 *  @input_mask: mask to be bit swapped
 *
 *  The source and destination port masks for flow director are bit swapped
 *  in that bit 15 effects bit 0, 14 effects 1, 13, 2 etc.  In order to
 *  generate a correctly swapped value we need to bit swap the mask and that
 *  is what is accomplished by this function.
 **/
static u32 ixgbe_get_fdirtcpm_82599(union ixgbe_atr_input *input_mask)
{
        u32 mask = ntohs(input_mask->formatted.dst_port);

        mask <<= IXGBE_FDIRTCPM_DPORTM_SHIFT;
        mask |= ntohs(input_mask->formatted.src_port);
        mask = ((mask & 0x55555555) << 1) | ((mask & 0xAAAAAAAA) >> 1);
        mask = ((mask & 0x33333333) << 2) | ((mask & 0xCCCCCCCC) >> 2);
        mask = ((mask & 0x0F0F0F0F) << 4) | ((mask & 0xF0F0F0F0) >> 4);
        return ((mask & 0x00FF00FF) << 8) | ((mask & 0xFF00FF00) >> 8);
}

/*
 * These two macros are meant to address the fact that we have registers
 * that are either all or in part big-endian.  As a result on big-endian
 * systems we will end up byte swapping the value to little-endian before
 * it is byte swapped again and written to the hardware in the original
 * big-endian format.
 */
#define IXGBE_STORE_AS_BE32(_value) \
        (((u32)(_value) >> 24) | (((u32)(_value) & 0x00FF0000) >> 8) | \
         (((u32)(_value) & 0x0000FF00) << 8) | ((u32)(_value) << 24))

#define IXGBE_WRITE_REG_BE32(a, reg, value) \
        IXGBE_WRITE_REG((a), (reg), IXGBE_STORE_AS_BE32(ntohl(value)))

#define IXGBE_STORE_AS_BE16(_value) __swab16(ntohs((_value)))

int ixgbe_fdir_set_input_mask_82599(struct ixgbe_hw *hw,
                                    union ixgbe_atr_input *input_mask)
{
        /* mask IPv6 since it is currently not supported */
        u32 fdirm = IXGBE_FDIRM_DIPv6;
        u32 fdirtcpm;

        /*
         * Program the relevant mask registers.  If src/dst_port or src/dst_addr
         * are zero, then assume a full mask for that field.  Also assume that
         * a VLAN of 0 is unspecified, so mask that out as well.  L4type
         * cannot be masked out in this implementation.
         *
         * This also assumes IPv4 only.  IPv6 masking isn't supported at this
         * point in time.
         */

        /* verify bucket hash is cleared on hash generation */
        if (input_mask->formatted.bkt_hash)
                hw_dbg(hw, " bucket hash should always be 0 in mask\n");

        /* Program FDIRM and verify partial masks */
        switch (input_mask->formatted.vm_pool & 0x7F) {
        case 0x0:
                fdirm |= IXGBE_FDIRM_POOL;
                break;
        case 0x7F:
                break;
        default:
                hw_dbg(hw, " Error on vm pool mask\n");
                return -EIO;
        }

        switch (input_mask->formatted.flow_type & IXGBE_ATR_L4TYPE_MASK) {
        case 0x0:
                fdirm |= IXGBE_FDIRM_L4P;
                if (input_mask->formatted.dst_port ||
                    input_mask->formatted.src_port) {
                        hw_dbg(hw, " Error on src/dst port mask\n");
                        return -EIO;
                }
                break;
        case IXGBE_ATR_L4TYPE_MASK:
                break;
        default:
                hw_dbg(hw, " Error on flow type mask\n");
                return -EIO;
        }

        switch (ntohs(input_mask->formatted.vlan_id) & 0xEFFF) {
        case 0x0000:
                /* mask VLAN ID */
                fdirm |= IXGBE_FDIRM_VLANID;
                fallthrough;
        case 0x0FFF:
                /* mask VLAN priority */
                fdirm |= IXGBE_FDIRM_VLANP;
                break;
        case 0xE000:
                /* mask VLAN ID only */
                fdirm |= IXGBE_FDIRM_VLANID;
                fallthrough;
        case 0xEFFF:
                /* no VLAN fields masked */
                break;
        default:
                hw_dbg(hw, " Error on VLAN mask\n");
                return -EIO;
        }

        switch ((__force u16)input_mask->formatted.flex_bytes & 0xFFFF) {
        case 0x0000:
                /* Mask Flex Bytes */
                fdirm |= IXGBE_FDIRM_FLEX;
                fallthrough;
        case 0xFFFF:
                break;
        default:
                hw_dbg(hw, " Error on flexible byte mask\n");
                return -EIO;
        }

        /* Now mask VM pool and destination IPv6 - bits 5 and 2 */
        IXGBE_WRITE_REG(hw, IXGBE_FDIRM, fdirm);

        /* store the TCP/UDP port masks, bit reversed from port layout */
        fdirtcpm = ixgbe_get_fdirtcpm_82599(input_mask);

        /* write both the same so that UDP and TCP use the same mask */
        IXGBE_WRITE_REG(hw, IXGBE_FDIRTCPM, ~fdirtcpm);
        IXGBE_WRITE_REG(hw, IXGBE_FDIRUDPM, ~fdirtcpm);

        /* also use it for SCTP */
        switch (hw->mac.type) {
        case ixgbe_mac_X550:
        case ixgbe_mac_X550EM_x:
        case ixgbe_mac_x550em_a:
        case ixgbe_mac_e610:
                IXGBE_WRITE_REG(hw, IXGBE_FDIRSCTPM, ~fdirtcpm);
                break;
        default:
                break;
        }

        /* store source and destination IP masks (big-endian) */
        IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIP4M,
                             ~input_mask->formatted.src_ip[0]);
        IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRDIP4M,
                             ~input_mask->formatted.dst_ip[0]);

        return 0;
}

int ixgbe_fdir_write_perfect_filter_82599(struct ixgbe_hw *hw,
                                          union ixgbe_atr_input *input,
                                          u16 soft_id, u8 queue)
{
        u32 fdirport, fdirvlan, fdirhash, fdircmd;
        int err;

        /* currently IPv6 is not supported, must be programmed with 0 */
        IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(0),
                             input->formatted.src_ip[0]);
        IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(1),
                             input->formatted.src_ip[1]);
        IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRSIPv6(2),
                             input->formatted.src_ip[2]);

        /* record the source address (big-endian) */
        IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPSA, input->formatted.src_ip[0]);

        /* record the first 32 bits of the destination address (big-endian) */
        IXGBE_WRITE_REG_BE32(hw, IXGBE_FDIRIPDA, input->formatted.dst_ip[0]);

        /* record source and destination port (little-endian)*/
        fdirport = be16_to_cpu(input->formatted.dst_port);
        fdirport <<= IXGBE_FDIRPORT_DESTINATION_SHIFT;
        fdirport |= be16_to_cpu(input->formatted.src_port);
        IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, fdirport);

        /* record vlan (little-endian) and flex_bytes(big-endian) */
        fdirvlan = IXGBE_STORE_AS_BE16(input->formatted.flex_bytes);
        fdirvlan <<= IXGBE_FDIRVLAN_FLEX_SHIFT;
        fdirvlan |= ntohs(input->formatted.vlan_id);
        IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, fdirvlan);

        /* configure FDIRHASH register */
        fdirhash = (__force u32)input->formatted.bkt_hash;
        fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
        IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);

        /*
         * flush all previous writes to make certain registers are
         * programmed prior to issuing the command
         */
        IXGBE_WRITE_FLUSH(hw);

        /* configure FDIRCMD register */
        fdircmd = IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE |
                  IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN;
        if (queue == IXGBE_FDIR_DROP_QUEUE)
                fdircmd |= IXGBE_FDIRCMD_DROP;
        fdircmd |= input->formatted.flow_type << IXGBE_FDIRCMD_FLOW_TYPE_SHIFT;
        fdircmd |= (u32)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT;
        fdircmd |= (u32)input->formatted.vm_pool << IXGBE_FDIRCMD_VT_POOL_SHIFT;

        IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd);
        err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
        if (err) {
                hw_dbg(hw, "Flow Director command did not complete!\n");
                return err;
        }

        return 0;
}

int ixgbe_fdir_erase_perfect_filter_82599(struct ixgbe_hw *hw,
                                          union ixgbe_atr_input *input,
                                          u16 soft_id)
{
        u32 fdirhash;
        u32 fdircmd;
        int err;

        /* configure FDIRHASH register */
        fdirhash = (__force u32)input->formatted.bkt_hash;
        fdirhash |= soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT;
        IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);

        /* flush hash to HW */
        IXGBE_WRITE_FLUSH(hw);

        /* Query if filter is present */
        IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, IXGBE_FDIRCMD_CMD_QUERY_REM_FILT);

        err = ixgbe_fdir_check_cmd_complete(hw, &fdircmd);
        if (err) {
                hw_dbg(hw, "Flow Director command did not complete!\n");
                return err;
        }

        /* if filter exists in hardware then remove it */
        if (fdircmd & IXGBE_FDIRCMD_FILTER_VALID) {
                IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash);
                IXGBE_WRITE_FLUSH(hw);
                IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD,
                                IXGBE_FDIRCMD_CMD_REMOVE_FLOW);
        }

        return 0;
}

/**
 *  ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register
 *  @hw: pointer to hardware structure
 *  @reg: analog register to read
 *  @val: read value
 *
 *  Performs read operation to Omer analog register specified.
 **/
static int ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val)
{
        u32  core_ctl;

        IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD |
                        (reg << 8));
        IXGBE_WRITE_FLUSH(hw);
        udelay(10);
        core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL);
        *val = (u8)core_ctl;

        return 0;
}

/**
 *  ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register
 *  @hw: pointer to hardware structure
 *  @reg: atlas register to write
 *  @val: value to write
 *
 *  Performs write operation to Omer analog register specified.
 **/
static int ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val)
{
        u32  core_ctl;

        core_ctl = (reg << 8) | val;
        IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl);
        IXGBE_WRITE_FLUSH(hw);
        udelay(10);

        return 0;
}

/**
 *  ixgbe_start_hw_82599 - Prepare hardware for Tx/Rx
 *  @hw: pointer to hardware structure
 *
 *  Starts the hardware using the generic start_hw function
 *  and the generation start_hw function.
 *  Then performs revision-specific operations, if any.
 **/
static int ixgbe_start_hw_82599(struct ixgbe_hw *hw)
{
        int ret_val = 0;

        ret_val = ixgbe_start_hw_generic(hw);
        if (ret_val)
                return ret_val;

        ret_val = ixgbe_start_hw_gen2(hw);
        if (ret_val)
                return ret_val;

        /* We need to run link autotry after the driver loads */
        hw->mac.autotry_restart = true;

        return ixgbe_verify_fw_version_82599(hw);
}

/**
 *  ixgbe_identify_phy_82599 - Get physical layer module
 *  @hw: pointer to hardware structure
 *
 *  Determines the physical layer module found on the current adapter.
 *  If PHY already detected, maintains current PHY type in hw struct,
 *  otherwise executes the PHY detection routine.
 **/
static int ixgbe_identify_phy_82599(struct ixgbe_hw *hw)
{
        int status;

        /* Detect PHY if not unknown - returns success if already detected. */
        status = ixgbe_identify_phy_generic(hw);
        if (status) {
                /* 82599 10GBASE-T requires an external PHY */
                if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_copper)
                        return status;
                status = ixgbe_identify_module_generic(hw);
        }

        /* Set PHY type none if no PHY detected */
        if (hw->phy.type == ixgbe_phy_unknown) {
                hw->phy.type = ixgbe_phy_none;
                status = 0;
        }

        /* Return error if SFP module has been detected but is not supported */
        if (hw->phy.type == ixgbe_phy_sfp_unsupported)
                return -EOPNOTSUPP;

        return status;
}

/**
 *  ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599
 *  @hw: pointer to hardware structure
 *  @regval: register value to write to RXCTRL
 *
 *  Enables the Rx DMA unit for 82599
 **/
static int ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval)
{
        /*
         * Workaround for 82599 silicon errata when enabling the Rx datapath.
         * If traffic is incoming before we enable the Rx unit, it could hang
         * the Rx DMA unit.  Therefore, make sure the security engine is
         * completely disabled prior to enabling the Rx unit.
         */
        hw->mac.ops.disable_rx_buff(hw);

        if (regval & IXGBE_RXCTRL_RXEN)
                hw->mac.ops.enable_rx(hw);
        else
                hw->mac.ops.disable_rx(hw);

        hw->mac.ops.enable_rx_buff(hw);

        return 0;
}

/**
 *  ixgbe_verify_fw_version_82599 - verify fw version for 82599
 *  @hw: pointer to hardware structure
 *
 *  Verifies that installed the firmware version is 0.6 or higher
 *  for SFI devices. All 82599 SFI devices should have version 0.6 or higher.
 *
 *  Return: -EACCES if the FW is not present or if the FW version is
 *  not supported.
 **/
static int ixgbe_verify_fw_version_82599(struct ixgbe_hw *hw)
{
        u16 fw_offset, fw_ptp_cfg_offset;
        int status = -EACCES;
        u16 fw_version = 0;
        u16 offset;

        /* firmware check is only necessary for SFI devices */
        if (hw->phy.media_type != ixgbe_media_type_fiber)
                return 0;

        /* get the offset to the Firmware Module block */
        offset = IXGBE_FW_PTR;
        if (hw->eeprom.ops.read(hw, offset, &fw_offset))
                goto fw_version_err;

        if (fw_offset == 0 || fw_offset == 0xFFFF)
                return -EACCES;

        /* get the offset to the Pass Through Patch Configuration block */
        offset = fw_offset + IXGBE_FW_PASSTHROUGH_PATCH_CONFIG_PTR;
        if (hw->eeprom.ops.read(hw, offset, &fw_ptp_cfg_offset))
                goto fw_version_err;

        if (fw_ptp_cfg_offset == 0 || fw_ptp_cfg_offset == 0xFFFF)
                return -EACCES;

        /* get the firmware version */
        offset = fw_ptp_cfg_offset + IXGBE_FW_PATCH_VERSION_4;
        if (hw->eeprom.ops.read(hw, offset, &fw_version))
                goto fw_version_err;

        if (fw_version > 0x5)
                status = 0;

        return status;

fw_version_err:
        hw_err(hw, "eeprom read at offset %d failed\n", offset);
        return -EACCES;
}

/**
 *  ixgbe_verify_lesm_fw_enabled_82599 - Checks LESM FW module state.
 *  @hw: pointer to hardware structure
 *
 *  Returns true if the LESM FW module is present and enabled. Otherwise
 *  returns false. Smart Speed must be disabled if LESM FW module is enabled.
 **/
static bool ixgbe_verify_lesm_fw_enabled_82599(struct ixgbe_hw *hw)
{
        u16 fw_offset, fw_lesm_param_offset, fw_lesm_state;
        int status;

        /* get the offset to the Firmware Module block */
        status = hw->eeprom.ops.read(hw, IXGBE_FW_PTR, &fw_offset);

        if (status || fw_offset == 0 || fw_offset == 0xFFFF)
                return false;

        /* get the offset to the LESM Parameters block */
        status = hw->eeprom.ops.read(hw, (fw_offset +
                                     IXGBE_FW_LESM_PARAMETERS_PTR),
                                     &fw_lesm_param_offset);

        if (status ||
            fw_lesm_param_offset == 0 || fw_lesm_param_offset == 0xFFFF)
                return false;

        /* get the lesm state word */
        status = hw->eeprom.ops.read(hw, (fw_lesm_param_offset +
                                     IXGBE_FW_LESM_STATE_1),
                                     &fw_lesm_state);

        if (!status && (fw_lesm_state & IXGBE_FW_LESM_STATE_ENABLED))
                return true;

        return false;
}

/**
 *  ixgbe_read_eeprom_buffer_82599 - Read EEPROM word(s) using
 *  fastest available method
 *
 *  @hw: pointer to hardware structure
 *  @offset: offset of  word in EEPROM to read
 *  @words: number of words
 *  @data: word(s) read from the EEPROM
 *
 *  Retrieves 16 bit word(s) read from EEPROM
 **/
static int ixgbe_read_eeprom_buffer_82599(struct ixgbe_hw *hw, u16 offset,
                                          u16 words, u16 *data)
{
        struct ixgbe_eeprom_info *eeprom = &hw->eeprom;

        /* If EEPROM is detected and can be addressed using 14 bits,
         * use EERD otherwise use bit bang
         */
        if (eeprom->type == ixgbe_eeprom_spi &&
            offset + (words - 1) <= IXGBE_EERD_MAX_ADDR)
                return ixgbe_read_eerd_buffer_generic(hw, offset, words, data);

        return ixgbe_read_eeprom_buffer_bit_bang_generic(hw, offset, words,
                                                         data);
}

/**
 *  ixgbe_read_eeprom_82599 - Read EEPROM word using
 *  fastest available method
 *
 *  @hw: pointer to hardware structure
 *  @offset: offset of  word in the EEPROM to read
 *  @data: word read from the EEPROM
 *
 *  Reads a 16 bit word from the EEPROM
 **/
static int ixgbe_read_eeprom_82599(struct ixgbe_hw *hw,
                                   u16 offset, u16 *data)
{
        struct ixgbe_eeprom_info *eeprom = &hw->eeprom;

        /*
         * If EEPROM is detected and can be addressed using 14 bits,
         * use EERD otherwise use bit bang
         */
        if (eeprom->type == ixgbe_eeprom_spi && offset <= IXGBE_EERD_MAX_ADDR)
                return ixgbe_read_eerd_generic(hw, offset, data);

        return ixgbe_read_eeprom_bit_bang_generic(hw, offset, data);
}

/**
 * ixgbe_reset_pipeline_82599 - perform pipeline reset
 *
 * @hw: pointer to hardware structure
 *
 * Reset pipeline by asserting Restart_AN together with LMS change to ensure
 * full pipeline reset.  Note - We must hold the SW/FW semaphore before writing
 * to AUTOC, so this function assumes the semaphore is held.
 **/
static int ixgbe_reset_pipeline_82599(struct ixgbe_hw *hw)
{
        u32 i, autoc_reg, autoc2_reg;
        u32 anlp1_reg = 0;
        int ret_val;

        /* Enable link if disabled in NVM */
        autoc2_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC2);
        if (autoc2_reg & IXGBE_AUTOC2_LINK_DISABLE_MASK) {
                autoc2_reg &= ~IXGBE_AUTOC2_LINK_DISABLE_MASK;
                IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2_reg);
                IXGBE_WRITE_FLUSH(hw);
        }

        autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
        autoc_reg |= IXGBE_AUTOC_AN_RESTART;

        /* Write AUTOC register with toggled LMS[2] bit and Restart_AN */
        IXGBE_WRITE_REG(hw, IXGBE_AUTOC,
                        autoc_reg ^ (0x4 << IXGBE_AUTOC_LMS_SHIFT));

        /* Wait for AN to leave state 0 */
        for (i = 0; i < 10; i++) {
                usleep_range(4000, 8000);
                anlp1_reg = IXGBE_READ_REG(hw, IXGBE_ANLP1);
                if (anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)
                        break;
        }

        if (!(anlp1_reg & IXGBE_ANLP1_AN_STATE_MASK)) {
                hw_dbg(hw, "auto negotiation not completed\n");
                ret_val = -EIO;
                goto reset_pipeline_out;
        }

        ret_val = 0;

reset_pipeline_out:
        /* Write AUTOC register with original LMS field and Restart_AN */
        IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
        IXGBE_WRITE_FLUSH(hw);

        return ret_val;
}

/**
 *  ixgbe_read_i2c_byte_82599 - Reads 8 bit word over I2C
 *  @hw: pointer to hardware structure
 *  @byte_offset: byte offset to read
 *  @dev_addr: address to read from
 *  @data: value read
 *
 *  Performs byte read operation to SFP module's EEPROM over I2C interface at
 *  a specified device address.
 **/
static int ixgbe_read_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
                                     u8 dev_addr, u8 *data)
{
        s32 timeout = 200;
        int status;
        u32 esdp;

        if (hw->phy.qsfp_shared_i2c_bus == true) {
                /* Acquire I2C bus ownership. */
                esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
                esdp |= IXGBE_ESDP_SDP0;
                IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
                IXGBE_WRITE_FLUSH(hw);

                while (timeout) {
                        esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
                        if (esdp & IXGBE_ESDP_SDP1)
                                break;

                        usleep_range(5000, 10000);
                        timeout--;
                }

                if (!timeout) {
                        hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n");
                        status = -EIO;
                        goto release_i2c_access;
                }
        }

        status = ixgbe_read_i2c_byte_generic(hw, byte_offset, dev_addr, data);

release_i2c_access:
        if (hw->phy.qsfp_shared_i2c_bus == true) {
                /* Release I2C bus ownership. */
                esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
                esdp &= ~IXGBE_ESDP_SDP0;
                IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
                IXGBE_WRITE_FLUSH(hw);
        }

        return status;
}

/**
 *  ixgbe_write_i2c_byte_82599 - Writes 8 bit word over I2C
 *  @hw: pointer to hardware structure
 *  @byte_offset: byte offset to write
 *  @dev_addr: address to write to
 *  @data: value to write
 *
 *  Performs byte write operation to SFP module's EEPROM over I2C interface at
 *  a specified device address.
 **/
static int ixgbe_write_i2c_byte_82599(struct ixgbe_hw *hw, u8 byte_offset,
                                      u8 dev_addr, u8 data)
{
        s32 timeout = 200;
        int status;
        u32 esdp;

        if (hw->phy.qsfp_shared_i2c_bus == true) {
                /* Acquire I2C bus ownership. */
                esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
                esdp |= IXGBE_ESDP_SDP0;
                IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
                IXGBE_WRITE_FLUSH(hw);

                while (timeout) {
                        esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
                        if (esdp & IXGBE_ESDP_SDP1)
                                break;

                        usleep_range(5000, 10000);
                        timeout--;
                }

                if (!timeout) {
                        hw_dbg(hw, "Driver can't access resource, acquiring I2C bus timeout.\n");
                        status = -EIO;
                        goto release_i2c_access;
                }
        }

        status = ixgbe_write_i2c_byte_generic(hw, byte_offset, dev_addr, data);

release_i2c_access:
        if (hw->phy.qsfp_shared_i2c_bus == true) {
                /* Release I2C bus ownership. */
                esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
                esdp &= ~IXGBE_ESDP_SDP0;
                IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp);
                IXGBE_WRITE_FLUSH(hw);
        }

        return status;
}

static const struct ixgbe_mac_operations mac_ops_82599 = {
        .init_hw                = &ixgbe_init_hw_generic,
        .reset_hw               = &ixgbe_reset_hw_82599,
        .start_hw               = &ixgbe_start_hw_82599,
        .clear_hw_cntrs         = &ixgbe_clear_hw_cntrs_generic,
        .get_media_type         = &ixgbe_get_media_type_82599,
        .enable_rx_dma          = &ixgbe_enable_rx_dma_82599,
        .disable_rx_buff        = &ixgbe_disable_rx_buff_generic,
        .enable_rx_buff         = &ixgbe_enable_rx_buff_generic,
        .get_mac_addr           = &ixgbe_get_mac_addr_generic,
        .get_san_mac_addr       = &ixgbe_get_san_mac_addr_generic,
        .get_device_caps        = &ixgbe_get_device_caps_generic,
        .get_wwn_prefix         = &ixgbe_get_wwn_prefix_generic,
        .stop_adapter           = &ixgbe_stop_adapter_generic,
        .get_bus_info           = &ixgbe_get_bus_info_generic,
        .set_lan_id             = &ixgbe_set_lan_id_multi_port_pcie,
        .read_analog_reg8       = &ixgbe_read_analog_reg8_82599,
        .write_analog_reg8      = &ixgbe_write_analog_reg8_82599,
        .stop_link_on_d3        = &ixgbe_stop_mac_link_on_d3_82599,
        .setup_link             = &ixgbe_setup_mac_link_82599,
        .set_rxpba              = &ixgbe_set_rxpba_generic,
        .check_link             = &ixgbe_check_mac_link_generic,
        .get_link_capabilities  = &ixgbe_get_link_capabilities_82599,
        .led_on                 = &ixgbe_led_on_generic,
        .led_off                = &ixgbe_led_off_generic,
        .init_led_link_act      = ixgbe_init_led_link_act_generic,
        .blink_led_start        = &ixgbe_blink_led_start_generic,
        .blink_led_stop         = &ixgbe_blink_led_stop_generic,
        .set_rar                = &ixgbe_set_rar_generic,
        .clear_rar              = &ixgbe_clear_rar_generic,
        .set_vmdq               = &ixgbe_set_vmdq_generic,
        .set_vmdq_san_mac       = &ixgbe_set_vmdq_san_mac_generic,
        .clear_vmdq             = &ixgbe_clear_vmdq_generic,
        .init_rx_addrs          = &ixgbe_init_rx_addrs_generic,
        .update_mc_addr_list    = &ixgbe_update_mc_addr_list_generic,
        .enable_mc              = &ixgbe_enable_mc_generic,
        .disable_mc             = &ixgbe_disable_mc_generic,
        .clear_vfta             = &ixgbe_clear_vfta_generic,
        .set_vfta               = &ixgbe_set_vfta_generic,
        .fc_enable              = &ixgbe_fc_enable_generic,
        .setup_fc               = ixgbe_setup_fc_generic,
        .fc_autoneg             = ixgbe_fc_autoneg,
        .set_fw_drv_ver         = &ixgbe_set_fw_drv_ver_generic,
        .init_uta_tables        = &ixgbe_init_uta_tables_generic,
        .setup_sfp              = &ixgbe_setup_sfp_modules_82599,
        .set_mac_anti_spoofing  = &ixgbe_set_mac_anti_spoofing,
        .set_vlan_anti_spoofing = &ixgbe_set_vlan_anti_spoofing,
        .acquire_swfw_sync      = &ixgbe_acquire_swfw_sync,
        .release_swfw_sync      = &ixgbe_release_swfw_sync,
        .init_swfw_sync         = NULL,
        .get_thermal_sensor_data = &ixgbe_get_thermal_sensor_data_generic,
        .init_thermal_sensor_thresh = &ixgbe_init_thermal_sensor_thresh_generic,
        .prot_autoc_read        = &prot_autoc_read_82599,
        .prot_autoc_write       = &prot_autoc_write_82599,
        .enable_rx              = &ixgbe_enable_rx_generic,
        .disable_rx             = &ixgbe_disable_rx_generic,
};

static const struct ixgbe_eeprom_operations eeprom_ops_82599 = {
        .init_params            = &ixgbe_init_eeprom_params_generic,
        .read                   = &ixgbe_read_eeprom_82599,
        .read_buffer            = &ixgbe_read_eeprom_buffer_82599,
        .write                  = &ixgbe_write_eeprom_generic,
        .write_buffer           = &ixgbe_write_eeprom_buffer_bit_bang_generic,
        .calc_checksum          = &ixgbe_calc_eeprom_checksum_generic,
        .validate_checksum      = &ixgbe_validate_eeprom_checksum_generic,
        .update_checksum        = &ixgbe_update_eeprom_checksum_generic,
        .read_pba_string        = &ixgbe_read_pba_string_generic,
};

static const struct ixgbe_phy_operations phy_ops_82599 = {
        .identify               = &ixgbe_identify_phy_82599,
        .identify_sfp           = &ixgbe_identify_module_generic,
        .init                   = &ixgbe_init_phy_ops_82599,
        .reset                  = &ixgbe_reset_phy_generic,
        .read_reg               = &ixgbe_read_phy_reg_generic,
        .write_reg              = &ixgbe_write_phy_reg_generic,
        .setup_link             = &ixgbe_setup_phy_link_generic,
        .setup_link_speed       = &ixgbe_setup_phy_link_speed_generic,
        .read_i2c_byte          = &ixgbe_read_i2c_byte_generic,
        .write_i2c_byte         = &ixgbe_write_i2c_byte_generic,
        .read_i2c_sff8472       = &ixgbe_read_i2c_sff8472_generic,
        .read_i2c_eeprom        = &ixgbe_read_i2c_eeprom_generic,
        .write_i2c_eeprom       = &ixgbe_write_i2c_eeprom_generic,
        .check_overtemp         = &ixgbe_tn_check_overtemp,
};

const struct ixgbe_info ixgbe_82599_info = {
        .mac                    = ixgbe_mac_82599EB,
        .get_invariants         = &ixgbe_get_invariants_82599,
        .mac_ops                = &mac_ops_82599,
        .eeprom_ops             = &eeprom_ops_82599,
        .phy_ops                = &phy_ops_82599,
        .mbx_ops                = &mbx_ops_generic,
        .mvals                  = ixgbe_mvals_8259X,
};