#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/usb.h>
#include "mt7615.h"
#include "mac.h"
#include "mcu.h"
#include "regs.h"
const u32 mt7663_usb_sdio_reg_map[] = {
[MT_TOP_CFG_BASE] = 0x80020000,
[MT_HW_BASE] = 0x80000000,
[MT_DMA_SHDL_BASE] = 0x5000a000,
[MT_HIF_BASE] = 0x50000000,
[MT_CSR_BASE] = 0x40000000,
[MT_EFUSE_ADDR_BASE] = 0x78011000,
[MT_TOP_MISC_BASE] = 0x81020000,
[MT_PLE_BASE] = 0x82060000,
[MT_PSE_BASE] = 0x82068000,
[MT_PP_BASE] = 0x8206c000,
[MT_WTBL_BASE_ADDR] = 0x820e0000,
[MT_CFG_BASE] = 0x820f0000,
[MT_AGG_BASE] = 0x820f2000,
[MT_ARB_BASE] = 0x820f3000,
[MT_TMAC_BASE] = 0x820f4000,
[MT_RMAC_BASE] = 0x820f5000,
[MT_DMA_BASE] = 0x820f7000,
[MT_PF_BASE] = 0x820f8000,
[MT_WTBL_BASE_ON] = 0x820f9000,
[MT_WTBL_BASE_OFF] = 0x820f9800,
[MT_LPON_BASE] = 0x820fb000,
[MT_MIB_BASE] = 0x820fd000,
};
EXPORT_SYMBOL_GPL(mt7663_usb_sdio_reg_map);
static void
mt7663_usb_sdio_write_txwi(struct mt7615_dev *dev, struct mt76_wcid *wcid,
enum mt76_txq_id qid, struct ieee80211_sta *sta,
struct ieee80211_key_conf *key, int pid,
struct sk_buff *skb)
{
__le32 *txwi = (__le32 *)(skb->data - MT_USB_TXD_SIZE);
memset(txwi, 0, MT_USB_TXD_SIZE);
mt7615_mac_write_txwi(dev, txwi, skb, wcid, sta, pid, key, qid, false);
skb_push(skb, MT_USB_TXD_SIZE);
}
static int mt7663_usb_sdio_set_rates(struct mt7615_dev *dev,
struct mt7615_wtbl_rate_desc *wrd)
{
struct mt7615_rate_desc *rate = &wrd->rate;
struct mt7615_sta *sta = wrd->sta;
u32 w5, w27, addr, val;
u16 idx;
lockdep_assert_held(&dev->mt76.mutex);
if (!sta)
return -EINVAL;
if (!mt76_poll(dev, MT_WTBL_UPDATE, MT_WTBL_UPDATE_BUSY, 0, 5000))
return -ETIMEDOUT;
addr = mt7615_mac_wtbl_addr(dev, sta->wcid.idx);
w27 = mt76_rr(dev, addr + 27 * 4);
w27 &= ~MT_WTBL_W27_CC_BW_SEL;
w27 |= FIELD_PREP(MT_WTBL_W27_CC_BW_SEL, rate->bw);
w5 = mt76_rr(dev, addr + 5 * 4);
w5 &= ~(MT_WTBL_W5_BW_CAP | MT_WTBL_W5_CHANGE_BW_RATE |
MT_WTBL_W5_MPDU_OK_COUNT |
MT_WTBL_W5_MPDU_FAIL_COUNT |
MT_WTBL_W5_RATE_IDX);
w5 |= FIELD_PREP(MT_WTBL_W5_BW_CAP, rate->bw) |
FIELD_PREP(MT_WTBL_W5_CHANGE_BW_RATE,
rate->bw_idx ? rate->bw_idx - 1 : 7);
mt76_wr(dev, MT_WTBL_RIUCR0, w5);
mt76_wr(dev, MT_WTBL_RIUCR1,
FIELD_PREP(MT_WTBL_RIUCR1_RATE0, rate->probe_val) |
FIELD_PREP(MT_WTBL_RIUCR1_RATE1, rate->val[0]) |
FIELD_PREP(MT_WTBL_RIUCR1_RATE2_LO, rate->val[1]));
mt76_wr(dev, MT_WTBL_RIUCR2,
FIELD_PREP(MT_WTBL_RIUCR2_RATE2_HI, rate->val[1] >> 8) |
FIELD_PREP(MT_WTBL_RIUCR2_RATE3, rate->val[1]) |
FIELD_PREP(MT_WTBL_RIUCR2_RATE4, rate->val[2]) |
FIELD_PREP(MT_WTBL_RIUCR2_RATE5_LO, rate->val[2]));
mt76_wr(dev, MT_WTBL_RIUCR3,
FIELD_PREP(MT_WTBL_RIUCR3_RATE5_HI, rate->val[2] >> 4) |
FIELD_PREP(MT_WTBL_RIUCR3_RATE6, rate->val[3]) |
FIELD_PREP(MT_WTBL_RIUCR3_RATE7, rate->val[3]));
mt76_wr(dev, MT_WTBL_UPDATE,
FIELD_PREP(MT_WTBL_UPDATE_WLAN_IDX, sta->wcid.idx) |
MT_WTBL_UPDATE_RATE_UPDATE |
MT_WTBL_UPDATE_TX_COUNT_CLEAR);
mt76_wr(dev, addr + 27 * 4, w27);
sta->rate_probe = sta->rateset[rate->rateset].probe_rate.idx != -1;
idx = sta->vif->mt76.omac_idx;
idx = idx > HW_BSSID_MAX ? HW_BSSID_0 : idx;
addr = idx > 1 ? MT_LPON_TCR2(idx): MT_LPON_TCR0(idx);
mt76_rmw(dev, addr, MT_LPON_TCR_MODE, MT_LPON_TCR_READ);
val = mt76_rr(dev, MT_LPON_UTTR0);
sta->rate_set_tsf = (val & ~BIT(0)) | rate->rateset;
if (!(sta->wcid.tx_info & MT_WCID_TX_INFO_SET))
mt76_poll(dev, MT_WTBL_UPDATE, MT_WTBL_UPDATE_BUSY, 0, 5000);
sta->rate_count = 2 * MT7615_RATE_RETRY * sta->n_rates;
sta->wcid.tx_info |= MT_WCID_TX_INFO_SET;
return 0;
}
static void mt7663_usb_sdio_rate_work(struct work_struct *work)
{
struct mt7615_wtbl_rate_desc *wrd, *wrd_next;
struct list_head wrd_list;
struct mt7615_dev *dev;
dev = (struct mt7615_dev *)container_of(work, struct mt7615_dev,
rate_work);
INIT_LIST_HEAD(&wrd_list);
spin_lock_bh(&dev->mt76.lock);
list_splice_init(&dev->wrd_head, &wrd_list);
spin_unlock_bh(&dev->mt76.lock);
list_for_each_entry_safe(wrd, wrd_next, &wrd_list, node) {
list_del(&wrd->node);
mt7615_mutex_acquire(dev);
mt7663_usb_sdio_set_rates(dev, wrd);
mt7615_mutex_release(dev);
kfree(wrd);
}
}
bool mt7663_usb_sdio_tx_status_data(struct mt76_dev *mdev, u8 *update)
{
struct mt7615_dev *dev = container_of(mdev, struct mt7615_dev, mt76);
mt7615_mutex_acquire(dev);
mt7615_mac_sta_poll(dev);
mt7615_mutex_release(dev);
return false;
}
EXPORT_SYMBOL_GPL(mt7663_usb_sdio_tx_status_data);
void mt7663_usb_sdio_tx_complete_skb(struct mt76_dev *mdev,
struct mt76_queue_entry *e)
{
unsigned int headroom = MT_USB_TXD_SIZE;
if (mt76_is_usb(mdev))
headroom += MT_USB_HDR_SIZE;
skb_pull(e->skb, headroom);
mt76_tx_complete_skb(mdev, e->wcid, e->skb);
}
EXPORT_SYMBOL_GPL(mt7663_usb_sdio_tx_complete_skb);
int mt7663_usb_sdio_tx_prepare_skb(struct mt76_dev *mdev, void *txwi_ptr,
enum mt76_txq_id qid, struct mt76_wcid *wcid,
struct ieee80211_sta *sta,
struct mt76_tx_info *tx_info)
{
struct mt7615_dev *dev = container_of(mdev, struct mt7615_dev, mt76);
struct sk_buff *skb = tx_info->skb;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_key_conf *key = info->control.hw_key;
struct mt7615_sta *msta;
int pad, err, pktid;
msta = wcid ? container_of(wcid, struct mt7615_sta, wcid) : NULL;
if (!wcid)
wcid = &dev->mt76.global_wcid;
if ((info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE) &&
msta && !msta->rate_probe) {
spin_lock_bh(&dev->mt76.lock);
mt7615_mac_set_rates(&dev->phy, msta, &info->control.rates[0],
msta->rates);
spin_unlock_bh(&dev->mt76.lock);
}
pktid = mt76_tx_status_skb_add(&dev->mt76, wcid, skb);
mt7663_usb_sdio_write_txwi(dev, wcid, qid, sta, key, pktid, skb);
if (mt76_is_usb(mdev)) {
u32 len = skb->len;
put_unaligned_le32(len, skb_push(skb, sizeof(len)));
pad = round_up(skb->len, 4) + 4 - skb->len;
} else {
pad = round_up(skb->len, 4) - skb->len;
}
err = mt76_skb_adjust_pad(skb, pad);
if (err)
idr_remove(&wcid->pktid, pktid);
return err;
}
EXPORT_SYMBOL_GPL(mt7663_usb_sdio_tx_prepare_skb);
static int mt7663u_dma_sched_init(struct mt7615_dev *dev)
{
int i;
mt76_rmw(dev, MT_DMA_SHDL(MT_DMASHDL_PKT_MAX_SIZE),
MT_DMASHDL_PKT_MAX_SIZE_PLE | MT_DMASHDL_PKT_MAX_SIZE_PSE,
FIELD_PREP(MT_DMASHDL_PKT_MAX_SIZE_PLE, 1) |
FIELD_PREP(MT_DMASHDL_PKT_MAX_SIZE_PSE, 8));
mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_REFILL), 0xffe00006);
mt76_clear(dev, MT_DMA_SHDL(MT_DMASHDL_PAGE), BIT(16));
for (i = 0; i < 5; i++)
mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_GROUP_QUOTA(i)),
FIELD_PREP(MT_DMASHDL_GROUP_QUOTA_MIN, 0x3) |
FIELD_PREP(MT_DMASHDL_GROUP_QUOTA_MAX, 0x1ff));
mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_Q_MAP(0)), 0x42104210);
mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_Q_MAP(1)), 0x42104210);
mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_Q_MAP(2)), 0x4444);
mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_SCHED_SET0), 0x6501234f);
mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_SCHED_SET1), 0xedcba987);
mt76_wr(dev, MT_DMA_SHDL(MT_DMASHDL_OPTIONAL), 0x7004801c);
mt76_wr(dev, MT_UDMA_WLCFG_1,
FIELD_PREP(MT_WL_TX_TMOUT_LMT, 80000) |
FIELD_PREP(MT_WL_RX_AGG_PKT_LMT, 1));
mt76_clear(dev, MT_UDMA_WLCFG_0, MT_WL_RX_FLUSH);
mt76_set(dev, MT_HIF_RST, MT_HIF_LOGIC_RST_N);
mt76_set(dev, MT_UDMA_WLCFG_0,
MT_WL_RX_AGG_EN | MT_WL_RX_EN | MT_WL_TX_EN |
MT_WL_RX_MPSZ_PAD0 | MT_TICK_1US_EN |
MT_WL_TX_TMOUT_FUNC_EN);
mt76_rmw(dev, MT_UDMA_WLCFG_0, MT_WL_RX_AGG_LMT | MT_WL_RX_AGG_TO,
FIELD_PREP(MT_WL_RX_AGG_LMT, 32) |
FIELD_PREP(MT_WL_RX_AGG_TO, 100));
return 0;
}
static int mt7663_usb_sdio_init_hardware(struct mt7615_dev *dev)
{
int ret, idx;
ret = mt7615_eeprom_init(dev, MT_EFUSE_BASE);
if (ret < 0)
return ret;
if (mt76_is_usb(&dev->mt76)) {
ret = mt7663u_dma_sched_init(dev);
if (ret)
return ret;
}
set_bit(MT76_STATE_INITIALIZED, &dev->mphy.state);
idx = mt76_wcid_alloc(dev->mt76.wcid_mask, MT7615_WTBL_STA - 1);
if (idx)
return -ENOSPC;
dev->mt76.global_wcid.idx = idx;
dev->mt76.global_wcid.hw_key_idx = -1;
rcu_assign_pointer(dev->mt76.wcid[idx], &dev->mt76.global_wcid);
return 0;
}
int mt7663_usb_sdio_register_device(struct mt7615_dev *dev)
{
struct ieee80211_hw *hw = mt76_hw(dev);
int err;
INIT_WORK(&dev->rate_work, mt7663_usb_sdio_rate_work);
INIT_LIST_HEAD(&dev->wrd_head);
mt7615_init_device(dev);
err = mt7663_usb_sdio_init_hardware(dev);
if (err)
return err;
hw->extra_tx_headroom += MT_USB_TXD_SIZE;
if (mt76_is_usb(&dev->mt76)) {
hw->extra_tx_headroom += MT_USB_HDR_SIZE;
if (dev->mt76.usb.sg_en)
hw->max_tx_fragments = MT_HW_TXP_MAX_BUF_NUM;
else
hw->max_tx_fragments = 1;
}
err = mt76_register_device(&dev->mt76, true, mt76_rates,
ARRAY_SIZE(mt76_rates));
if (err < 0)
return err;
if (!dev->mt76.usb.sg_en) {
struct ieee80211_sta_vht_cap *vht_cap;
vht_cap = &dev->mphy.sband_5g.sband.vht_cap;
vht_cap->cap &= ~IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_11454;
}
ieee80211_queue_work(hw, &dev->mcu_work);
mt7615_init_txpower(dev, &dev->mphy.sband_2g.sband);
mt7615_init_txpower(dev, &dev->mphy.sband_5g.sband);
return mt7615_init_debugfs(dev);
}
EXPORT_SYMBOL_GPL(mt7663_usb_sdio_register_device);
MODULE_AUTHOR("Lorenzo Bianconi <lorenzo@kernel.org>");
MODULE_AUTHOR("Sean Wang <sean.wang@mediatek.com>");
MODULE_DESCRIPTION("MediaTek MT7663 SDIO/USB helpers");
MODULE_LICENSE("Dual BSD/GPL");
