// SPDX-License-Identifier: GPL-2.0
/*
 * Xilinx Test Pattern Generator
 *
 * Copyright (C) 2013-2015 Ideas on Board
 * Copyright (C) 2013-2015 Xilinx, Inc.
 *
 * Contacts: Hyun Kwon <hyun.kwon@xilinx.com>
 *           Laurent Pinchart <laurent.pinchart@ideasonboard.com>
 */

#include <linux/device.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/of_graph.h>
#include <linux/platform_device.h>
#include <linux/xilinx-v4l2-controls.h>

#include <media/v4l2-async.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-subdev.h>

#include "xilinx-vip.h"
#include "xilinx-vtc.h"

#define XTPG_CTRL_STATUS_SLAVE_ERROR            (1 << 16)
#define XTPG_CTRL_IRQ_SLAVE_ERROR               (1 << 16)

#define XTPG_PATTERN_CONTROL                    0x0100
#define XTPG_PATTERN_MASK                       (0xf << 0)
#define XTPG_PATTERN_CONTROL_CROSS_HAIRS        (1 << 4)
#define XTPG_PATTERN_CONTROL_MOVING_BOX         (1 << 5)
#define XTPG_PATTERN_CONTROL_COLOR_MASK_SHIFT   6
#define XTPG_PATTERN_CONTROL_COLOR_MASK_MASK    (0xf << 6)
#define XTPG_PATTERN_CONTROL_STUCK_PIXEL        (1 << 9)
#define XTPG_PATTERN_CONTROL_NOISE              (1 << 10)
#define XTPG_PATTERN_CONTROL_MOTION             (1 << 12)
#define XTPG_MOTION_SPEED                       0x0104
#define XTPG_CROSS_HAIRS                        0x0108
#define XTPG_CROSS_HAIRS_ROW_SHIFT              0
#define XTPG_CROSS_HAIRS_ROW_MASK               (0xfff << 0)
#define XTPG_CROSS_HAIRS_COLUMN_SHIFT           16
#define XTPG_CROSS_HAIRS_COLUMN_MASK            (0xfff << 16)
#define XTPG_ZPLATE_HOR_CONTROL                 0x010c
#define XTPG_ZPLATE_VER_CONTROL                 0x0110
#define XTPG_ZPLATE_START_SHIFT                 0
#define XTPG_ZPLATE_START_MASK                  (0xffff << 0)
#define XTPG_ZPLATE_SPEED_SHIFT                 16
#define XTPG_ZPLATE_SPEED_MASK                  (0xffff << 16)
#define XTPG_BOX_SIZE                           0x0114
#define XTPG_BOX_COLOR                          0x0118
#define XTPG_STUCK_PIXEL_THRESH                 0x011c
#define XTPG_NOISE_GAIN                         0x0120
#define XTPG_BAYER_PHASE                        0x0124
#define XTPG_BAYER_PHASE_RGGB                   0
#define XTPG_BAYER_PHASE_GRBG                   1
#define XTPG_BAYER_PHASE_GBRG                   2
#define XTPG_BAYER_PHASE_BGGR                   3
#define XTPG_BAYER_PHASE_OFF                    4

/*
 * The minimum blanking value is one clock cycle for the front porch, one clock
 * cycle for the sync pulse and one clock cycle for the back porch.
 */
#define XTPG_MIN_HBLANK                 3
#define XTPG_MAX_HBLANK                 (XVTC_MAX_HSIZE - XVIP_MIN_WIDTH)
#define XTPG_MIN_VBLANK                 3
#define XTPG_MAX_VBLANK                 (XVTC_MAX_VSIZE - XVIP_MIN_HEIGHT)

/**
 * struct xtpg_device - Xilinx Test Pattern Generator device structure
 * @xvip: Xilinx Video IP device
 * @pads: media pads
 * @npads: number of pads (1 or 2)
 * @has_input: whether an input is connected to the sink pad
 * @formats: active V4L2 media bus format for each pad
 * @default_format: default V4L2 media bus format
 * @vip_format: format information corresponding to the active format
 * @bayer: boolean flag if TPG is set to any bayer format
 * @ctrl_handler: control handler
 * @hblank: horizontal blanking control
 * @vblank: vertical blanking control
 * @pattern: test pattern control
 * @streaming: is the video stream active
 * @vtc: video timing controller
 * @vtmux_gpio: video timing mux GPIO
 */
struct xtpg_device {
        struct xvip_device xvip;

        struct media_pad pads[2];
        unsigned int npads;
        bool has_input;

        struct v4l2_mbus_framefmt formats[2];
        struct v4l2_mbus_framefmt default_format;
        const struct xvip_video_format *vip_format;
        bool bayer;

        struct v4l2_ctrl_handler ctrl_handler;
        struct v4l2_ctrl *hblank;
        struct v4l2_ctrl *vblank;
        struct v4l2_ctrl *pattern;
        bool streaming;

        struct xvtc_device *vtc;
        struct gpio_desc *vtmux_gpio;
};

static inline struct xtpg_device *to_tpg(struct v4l2_subdev *subdev)
{
        return container_of(subdev, struct xtpg_device, xvip.subdev);
}

static u32 xtpg_get_bayer_phase(unsigned int code)
{
        switch (code) {
        case MEDIA_BUS_FMT_SRGGB8_1X8:
                return XTPG_BAYER_PHASE_RGGB;
        case MEDIA_BUS_FMT_SGRBG8_1X8:
                return XTPG_BAYER_PHASE_GRBG;
        case MEDIA_BUS_FMT_SGBRG8_1X8:
                return XTPG_BAYER_PHASE_GBRG;
        case MEDIA_BUS_FMT_SBGGR8_1X8:
                return XTPG_BAYER_PHASE_BGGR;
        default:
                return XTPG_BAYER_PHASE_OFF;
        }
}

static void __xtpg_update_pattern_control(struct xtpg_device *xtpg,
                                          bool passthrough, bool pattern)
{
        u32 pattern_mask = (1 << (xtpg->pattern->maximum + 1)) - 1;

        /*
         * If the TPG has no sink pad or no input connected to its sink pad
         * passthrough mode can't be enabled.
         */
        if (xtpg->npads == 1 || !xtpg->has_input)
                passthrough = false;

        /* If passthrough mode is allowed unmask bit 0. */
        if (passthrough)
                pattern_mask &= ~1;

        /* If test pattern mode is allowed unmask all other bits. */
        if (pattern)
                pattern_mask &= 1;

        __v4l2_ctrl_modify_range(xtpg->pattern, 0, xtpg->pattern->maximum,
                                 pattern_mask, pattern ? 9 : 0);
}

static void xtpg_update_pattern_control(struct xtpg_device *xtpg,
                                        bool passthrough, bool pattern)
{
        mutex_lock(xtpg->ctrl_handler.lock);
        __xtpg_update_pattern_control(xtpg, passthrough, pattern);
        mutex_unlock(xtpg->ctrl_handler.lock);
}

/* -----------------------------------------------------------------------------
 * V4L2 Subdevice Video Operations
 */

static int xtpg_s_stream(struct v4l2_subdev *subdev, int enable)
{
        struct xtpg_device *xtpg = to_tpg(subdev);
        unsigned int width = xtpg->formats[0].width;
        unsigned int height = xtpg->formats[0].height;
        bool passthrough;
        u32 bayer_phase;

        if (!enable) {
                xvip_stop(&xtpg->xvip);
                if (xtpg->vtc)
                        xvtc_generator_stop(xtpg->vtc);

                xtpg_update_pattern_control(xtpg, true, true);
                xtpg->streaming = false;
                return 0;
        }

        xvip_set_frame_size(&xtpg->xvip, &xtpg->formats[0]);

        if (xtpg->vtc) {
                struct xvtc_config config = {
                        .hblank_start = width,
                        .hsync_start = width + 1,
                        .vblank_start = height,
                        .vsync_start = height + 1,
                };
                unsigned int htotal;
                unsigned int vtotal;

                htotal = min_t(unsigned int, XVTC_MAX_HSIZE,
                               v4l2_ctrl_g_ctrl(xtpg->hblank) + width);
                vtotal = min_t(unsigned int, XVTC_MAX_VSIZE,
                               v4l2_ctrl_g_ctrl(xtpg->vblank) + height);

                config.hsync_end = htotal - 1;
                config.hsize = htotal;
                config.vsync_end = vtotal - 1;
                config.vsize = vtotal;

                xvtc_generator_start(xtpg->vtc, &config);
        }

        /*
         * Configure the bayer phase and video timing mux based on the
         * operation mode (passthrough or test pattern generation). The test
         * pattern can be modified by the control set handler, we thus need to
         * take the control lock here to avoid races.
         */
        mutex_lock(xtpg->ctrl_handler.lock);

        xvip_clr_and_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
                         XTPG_PATTERN_MASK, xtpg->pattern->cur.val);

        /*
         * Switching between passthrough and test pattern generation modes isn't
         * allowed during streaming, update the control range accordingly.
         */
        passthrough = xtpg->pattern->cur.val == 0;
        __xtpg_update_pattern_control(xtpg, passthrough, !passthrough);

        xtpg->streaming = true;

        mutex_unlock(xtpg->ctrl_handler.lock);

        /*
         * For TPG v5.0, the bayer phase needs to be off for the pass through
         * mode, otherwise the external input would be subsampled.
         */
        bayer_phase = passthrough ? XTPG_BAYER_PHASE_OFF
                    : xtpg_get_bayer_phase(xtpg->formats[0].code);
        xvip_write(&xtpg->xvip, XTPG_BAYER_PHASE, bayer_phase);

        if (xtpg->vtmux_gpio)
                gpiod_set_value_cansleep(xtpg->vtmux_gpio, !passthrough);

        xvip_start(&xtpg->xvip);

        return 0;
}

/* -----------------------------------------------------------------------------
 * V4L2 Subdevice Pad Operations
 */

static struct v4l2_mbus_framefmt *
__xtpg_get_pad_format(struct xtpg_device *xtpg,
                      struct v4l2_subdev_state *sd_state,
                      unsigned int pad, u32 which)
{
        switch (which) {
        case V4L2_SUBDEV_FORMAT_TRY:
                return v4l2_subdev_state_get_format(sd_state, pad);
        case V4L2_SUBDEV_FORMAT_ACTIVE:
                return &xtpg->formats[pad];
        default:
                return NULL;
        }
}

static int xtpg_get_format(struct v4l2_subdev *subdev,
                           struct v4l2_subdev_state *sd_state,
                           struct v4l2_subdev_format *fmt)
{
        struct xtpg_device *xtpg = to_tpg(subdev);

        fmt->format = *__xtpg_get_pad_format(xtpg, sd_state, fmt->pad,
                                             fmt->which);

        return 0;
}

static int xtpg_set_format(struct v4l2_subdev *subdev,
                           struct v4l2_subdev_state *sd_state,
                           struct v4l2_subdev_format *fmt)
{
        struct xtpg_device *xtpg = to_tpg(subdev);
        struct v4l2_mbus_framefmt *__format;
        u32 bayer_phase;

        __format = __xtpg_get_pad_format(xtpg, sd_state, fmt->pad, fmt->which);

        /* In two pads mode the source pad format is always identical to the
         * sink pad format.
         */
        if (xtpg->npads == 2 && fmt->pad == 1) {
                fmt->format = *__format;
                return 0;
        }

        /* Bayer phase is configurable at runtime */
        if (xtpg->bayer) {
                bayer_phase = xtpg_get_bayer_phase(fmt->format.code);
                if (bayer_phase != XTPG_BAYER_PHASE_OFF)
                        __format->code = fmt->format.code;
        }

        xvip_set_format_size(__format, fmt);

        fmt->format = *__format;

        /* Propagate the format to the source pad. */
        if (xtpg->npads == 2) {
                __format = __xtpg_get_pad_format(xtpg, sd_state, 1,
                                                 fmt->which);
                *__format = fmt->format;
        }

        return 0;
}

/* -----------------------------------------------------------------------------
 * V4L2 Subdevice Operations
 */

static int xtpg_enum_frame_size(struct v4l2_subdev *subdev,
                                struct v4l2_subdev_state *sd_state,
                                struct v4l2_subdev_frame_size_enum *fse)
{
        struct v4l2_mbus_framefmt *format;

        format = v4l2_subdev_state_get_format(sd_state, fse->pad);

        if (fse->index || fse->code != format->code)
                return -EINVAL;

        /* Min / max values for pad 0 is always fixed in both one and two pads
         * modes. In two pads mode, the source pad(= 1) size is identical to
         * the sink pad size */
        if (fse->pad == 0) {
                fse->min_width = XVIP_MIN_WIDTH;
                fse->max_width = XVIP_MAX_WIDTH;
                fse->min_height = XVIP_MIN_HEIGHT;
                fse->max_height = XVIP_MAX_HEIGHT;
        } else {
                fse->min_width = format->width;
                fse->max_width = format->width;
                fse->min_height = format->height;
                fse->max_height = format->height;
        }

        return 0;
}

static int xtpg_open(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
{
        struct xtpg_device *xtpg = to_tpg(subdev);
        struct v4l2_mbus_framefmt *format;

        format = v4l2_subdev_state_get_format(fh->state, 0);
        *format = xtpg->default_format;

        if (xtpg->npads == 2) {
                format = v4l2_subdev_state_get_format(fh->state, 1);
                *format = xtpg->default_format;
        }

        return 0;
}

static int xtpg_close(struct v4l2_subdev *subdev, struct v4l2_subdev_fh *fh)
{
        return 0;
}

static int xtpg_s_ctrl(struct v4l2_ctrl *ctrl)
{
        struct xtpg_device *xtpg = container_of(ctrl->handler,
                                                struct xtpg_device,
                                                ctrl_handler);
        switch (ctrl->id) {
        case V4L2_CID_TEST_PATTERN:
                xvip_clr_and_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
                                 XTPG_PATTERN_MASK, ctrl->val);
                return 0;
        case V4L2_CID_XILINX_TPG_CROSS_HAIRS:
                xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
                                XTPG_PATTERN_CONTROL_CROSS_HAIRS, ctrl->val);
                return 0;
        case V4L2_CID_XILINX_TPG_MOVING_BOX:
                xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
                                XTPG_PATTERN_CONTROL_MOVING_BOX, ctrl->val);
                return 0;
        case V4L2_CID_XILINX_TPG_COLOR_MASK:
                xvip_clr_and_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
                                 XTPG_PATTERN_CONTROL_COLOR_MASK_MASK,
                                 ctrl->val <<
                                 XTPG_PATTERN_CONTROL_COLOR_MASK_SHIFT);
                return 0;
        case V4L2_CID_XILINX_TPG_STUCK_PIXEL:
                xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
                                XTPG_PATTERN_CONTROL_STUCK_PIXEL, ctrl->val);
                return 0;
        case V4L2_CID_XILINX_TPG_NOISE:
                xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
                                XTPG_PATTERN_CONTROL_NOISE, ctrl->val);
                return 0;
        case V4L2_CID_XILINX_TPG_MOTION:
                xvip_clr_or_set(&xtpg->xvip, XTPG_PATTERN_CONTROL,
                                XTPG_PATTERN_CONTROL_MOTION, ctrl->val);
                return 0;
        case V4L2_CID_XILINX_TPG_MOTION_SPEED:
                xvip_write(&xtpg->xvip, XTPG_MOTION_SPEED, ctrl->val);
                return 0;
        case V4L2_CID_XILINX_TPG_CROSS_HAIR_ROW:
                xvip_clr_and_set(&xtpg->xvip, XTPG_CROSS_HAIRS,
                                 XTPG_CROSS_HAIRS_ROW_MASK,
                                 ctrl->val << XTPG_CROSS_HAIRS_ROW_SHIFT);
                return 0;
        case V4L2_CID_XILINX_TPG_CROSS_HAIR_COLUMN:
                xvip_clr_and_set(&xtpg->xvip, XTPG_CROSS_HAIRS,
                                 XTPG_CROSS_HAIRS_COLUMN_MASK,
                                 ctrl->val << XTPG_CROSS_HAIRS_COLUMN_SHIFT);
                return 0;
        case V4L2_CID_XILINX_TPG_ZPLATE_HOR_START:
                xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_HOR_CONTROL,
                                 XTPG_ZPLATE_START_MASK,
                                 ctrl->val << XTPG_ZPLATE_START_SHIFT);
                return 0;
        case V4L2_CID_XILINX_TPG_ZPLATE_HOR_SPEED:
                xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_HOR_CONTROL,
                                 XTPG_ZPLATE_SPEED_MASK,
                                 ctrl->val << XTPG_ZPLATE_SPEED_SHIFT);
                return 0;
        case V4L2_CID_XILINX_TPG_ZPLATE_VER_START:
                xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_VER_CONTROL,
                                 XTPG_ZPLATE_START_MASK,
                                 ctrl->val << XTPG_ZPLATE_START_SHIFT);
                return 0;
        case V4L2_CID_XILINX_TPG_ZPLATE_VER_SPEED:
                xvip_clr_and_set(&xtpg->xvip, XTPG_ZPLATE_VER_CONTROL,
                                 XTPG_ZPLATE_SPEED_MASK,
                                 ctrl->val << XTPG_ZPLATE_SPEED_SHIFT);
                return 0;
        case V4L2_CID_XILINX_TPG_BOX_SIZE:
                xvip_write(&xtpg->xvip, XTPG_BOX_SIZE, ctrl->val);
                return 0;
        case V4L2_CID_XILINX_TPG_BOX_COLOR:
                xvip_write(&xtpg->xvip, XTPG_BOX_COLOR, ctrl->val);
                return 0;
        case V4L2_CID_XILINX_TPG_STUCK_PIXEL_THRESH:
                xvip_write(&xtpg->xvip, XTPG_STUCK_PIXEL_THRESH, ctrl->val);
                return 0;
        case V4L2_CID_XILINX_TPG_NOISE_GAIN:
                xvip_write(&xtpg->xvip, XTPG_NOISE_GAIN, ctrl->val);
                return 0;
        }

        return 0;
}

static const struct v4l2_ctrl_ops xtpg_ctrl_ops = {
        .s_ctrl = xtpg_s_ctrl,
};

static const struct v4l2_subdev_core_ops xtpg_core_ops = {
};

static const struct v4l2_subdev_video_ops xtpg_video_ops = {
        .s_stream = xtpg_s_stream,
};

static const struct v4l2_subdev_pad_ops xtpg_pad_ops = {
        .enum_mbus_code         = xvip_enum_mbus_code,
        .enum_frame_size        = xtpg_enum_frame_size,
        .get_fmt                = xtpg_get_format,
        .set_fmt                = xtpg_set_format,
};

static const struct v4l2_subdev_ops xtpg_ops = {
        .core   = &xtpg_core_ops,
        .video  = &xtpg_video_ops,
        .pad    = &xtpg_pad_ops,
};

static const struct v4l2_subdev_internal_ops xtpg_internal_ops = {
        .open   = xtpg_open,
        .close  = xtpg_close,
};

/*
 * Control Config
 */

static const char *const xtpg_pattern_strings[] = {
        "Passthrough",
        "Horizontal Ramp",
        "Vertical Ramp",
        "Temporal Ramp",
        "Solid Red",
        "Solid Green",
        "Solid Blue",
        "Solid Black",
        "Solid White",
        "Color Bars",
        "Zone Plate",
        "Tartan Color Bars",
        "Cross Hatch",
        "None",
        "Vertical/Horizontal Ramps",
        "Black/White Checker Board",
};

static struct v4l2_ctrl_config xtpg_ctrls[] = {
        {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_CROSS_HAIRS,
                .name   = "Test Pattern: Cross Hairs",
                .type   = V4L2_CTRL_TYPE_BOOLEAN,
                .min    = false,
                .max    = true,
                .step   = 1,
                .def    = 0,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_MOVING_BOX,
                .name   = "Test Pattern: Moving Box",
                .type   = V4L2_CTRL_TYPE_BOOLEAN,
                .min    = false,
                .max    = true,
                .step   = 1,
                .def    = 0,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_COLOR_MASK,
                .name   = "Test Pattern: Color Mask",
                .type   = V4L2_CTRL_TYPE_BITMASK,
                .min    = 0,
                .max    = 0xf,
                .def    = 0,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_STUCK_PIXEL,
                .name   = "Test Pattern: Stuck Pixel",
                .type   = V4L2_CTRL_TYPE_BOOLEAN,
                .min    = false,
                .max    = true,
                .step   = 1,
                .def    = 0,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_NOISE,
                .name   = "Test Pattern: Noise",
                .type   = V4L2_CTRL_TYPE_BOOLEAN,
                .min    = false,
                .max    = true,
                .step   = 1,
                .def    = 0,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_MOTION,
                .name   = "Test Pattern: Motion",
                .type   = V4L2_CTRL_TYPE_BOOLEAN,
                .min    = false,
                .max    = true,
                .step   = 1,
                .def    = 0,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_MOTION_SPEED,
                .name   = "Test Pattern: Motion Speed",
                .type   = V4L2_CTRL_TYPE_INTEGER,
                .min    = 0,
                .max    = (1 << 8) - 1,
                .step   = 1,
                .def    = 4,
                .flags  = V4L2_CTRL_FLAG_SLIDER,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_CROSS_HAIR_ROW,
                .name   = "Test Pattern: Cross Hairs Row",
                .type   = V4L2_CTRL_TYPE_INTEGER,
                .min    = 0,
                .max    = (1 << 12) - 1,
                .step   = 1,
                .def    = 0x64,
                .flags  = V4L2_CTRL_FLAG_SLIDER,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_CROSS_HAIR_COLUMN,
                .name   = "Test Pattern: Cross Hairs Column",
                .type   = V4L2_CTRL_TYPE_INTEGER,
                .min    = 0,
                .max    = (1 << 12) - 1,
                .step   = 1,
                .def    = 0x64,
                .flags  = V4L2_CTRL_FLAG_SLIDER,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_ZPLATE_HOR_START,
                .name   = "Test Pattern: Zplate Horizontal Start Pos",
                .type   = V4L2_CTRL_TYPE_INTEGER,
                .min    = 0,
                .max    = (1 << 16) - 1,
                .step   = 1,
                .def    = 0x1e,
                .flags  = V4L2_CTRL_FLAG_SLIDER,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_ZPLATE_HOR_SPEED,
                .name   = "Test Pattern: Zplate Horizontal Speed",
                .type   = V4L2_CTRL_TYPE_INTEGER,
                .min    = 0,
                .max    = (1 << 16) - 1,
                .step   = 1,
                .def    = 0,
                .flags  = V4L2_CTRL_FLAG_SLIDER,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_ZPLATE_VER_START,
                .name   = "Test Pattern: Zplate Vertical Start Pos",
                .type   = V4L2_CTRL_TYPE_INTEGER,
                .min    = 0,
                .max    = (1 << 16) - 1,
                .step   = 1,
                .def    = 1,
                .flags  = V4L2_CTRL_FLAG_SLIDER,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_ZPLATE_VER_SPEED,
                .name   = "Test Pattern: Zplate Vertical Speed",
                .type   = V4L2_CTRL_TYPE_INTEGER,
                .min    = 0,
                .max    = (1 << 16) - 1,
                .step   = 1,
                .def    = 0,
                .flags  = V4L2_CTRL_FLAG_SLIDER,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_BOX_SIZE,
                .name   = "Test Pattern: Box Size",
                .type   = V4L2_CTRL_TYPE_INTEGER,
                .min    = 0,
                .max    = (1 << 12) - 1,
                .step   = 1,
                .def    = 0x32,
                .flags  = V4L2_CTRL_FLAG_SLIDER,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_BOX_COLOR,
                .name   = "Test Pattern: Box Color(RGB)",
                .type   = V4L2_CTRL_TYPE_INTEGER,
                .min    = 0,
                .max    = (1 << 24) - 1,
                .step   = 1,
                .def    = 0,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_STUCK_PIXEL_THRESH,
                .name   = "Test Pattern: Stuck Pixel threshold",
                .type   = V4L2_CTRL_TYPE_INTEGER,
                .min    = 0,
                .max    = (1 << 16) - 1,
                .step   = 1,
                .def    = 0,
                .flags  = V4L2_CTRL_FLAG_SLIDER,
        }, {
                .ops    = &xtpg_ctrl_ops,
                .id     = V4L2_CID_XILINX_TPG_NOISE_GAIN,
                .name   = "Test Pattern: Noise Gain",
                .type   = V4L2_CTRL_TYPE_INTEGER,
                .min    = 0,
                .max    = (1 << 8) - 1,
                .step   = 1,
                .def    = 0,
                .flags  = V4L2_CTRL_FLAG_SLIDER,
        },
};

/* -----------------------------------------------------------------------------
 * Media Operations
 */

static const struct media_entity_operations xtpg_media_ops = {
        .link_validate = v4l2_subdev_link_validate,
};

/* -----------------------------------------------------------------------------
 * Power Management
 */

static int __maybe_unused xtpg_pm_suspend(struct device *dev)
{
        struct xtpg_device *xtpg = dev_get_drvdata(dev);

        xvip_suspend(&xtpg->xvip);

        return 0;
}

static int __maybe_unused xtpg_pm_resume(struct device *dev)
{
        struct xtpg_device *xtpg = dev_get_drvdata(dev);

        xvip_resume(&xtpg->xvip);

        return 0;
}

/* -----------------------------------------------------------------------------
 * Platform Device Driver
 */

static int xtpg_parse_of(struct xtpg_device *xtpg)
{
        struct device *dev = xtpg->xvip.dev;
        struct device_node *node = xtpg->xvip.dev->of_node;
        unsigned int nports = 0;
        bool has_endpoint = false;

        for_each_of_graph_port(node, port) {
                const struct xvip_video_format *format;
                struct device_node *endpoint;

                format = xvip_of_get_format(port);
                if (IS_ERR(format)) {
                        dev_err(dev, "invalid format in DT");
                        return PTR_ERR(format);
                }

                /* Get and check the format description */
                if (!xtpg->vip_format) {
                        xtpg->vip_format = format;
                } else if (xtpg->vip_format != format) {
                        dev_err(dev, "in/out format mismatch in DT");
                        return -EINVAL;
                }

                if (nports == 0) {
                        endpoint = of_graph_get_next_port_endpoint(port, NULL);
                        if (endpoint)
                                has_endpoint = true;
                        of_node_put(endpoint);
                }

                /* Count the number of ports. */
                nports++;
        }

        if (nports != 1 && nports != 2) {
                dev_err(dev, "invalid number of ports %u\n", nports);
                return -EINVAL;
        }

        xtpg->npads = nports;
        if (nports == 2 && has_endpoint)
                xtpg->has_input = true;

        return 0;
}

static int xtpg_probe(struct platform_device *pdev)
{
        struct v4l2_subdev *subdev;
        struct xtpg_device *xtpg;
        u32 i, bayer_phase;
        int ret;

        xtpg = devm_kzalloc(&pdev->dev, sizeof(*xtpg), GFP_KERNEL);
        if (!xtpg)
                return -ENOMEM;

        xtpg->xvip.dev = &pdev->dev;

        ret = xtpg_parse_of(xtpg);
        if (ret < 0)
                return ret;

        ret = xvip_init_resources(&xtpg->xvip);
        if (ret < 0)
                return ret;

        xtpg->vtmux_gpio = devm_gpiod_get_optional(&pdev->dev, "timing",
                                                   GPIOD_OUT_HIGH);
        if (IS_ERR(xtpg->vtmux_gpio)) {
                ret = PTR_ERR(xtpg->vtmux_gpio);
                goto error_resource;
        }

        xtpg->vtc = xvtc_of_get(pdev->dev.of_node);
        if (IS_ERR(xtpg->vtc)) {
                ret = PTR_ERR(xtpg->vtc);
                goto error_resource;
        }

        /* Reset and initialize the core */
        xvip_reset(&xtpg->xvip);

        /* Initialize V4L2 subdevice and media entity. Pad numbers depend on the
         * number of pads.
         */
        if (xtpg->npads == 2) {
                xtpg->pads[0].flags = MEDIA_PAD_FL_SINK;
                xtpg->pads[1].flags = MEDIA_PAD_FL_SOURCE;
        } else {
                xtpg->pads[0].flags = MEDIA_PAD_FL_SOURCE;
        }

        /* Initialize the default format */
        xtpg->default_format.code = xtpg->vip_format->code;
        xtpg->default_format.field = V4L2_FIELD_NONE;
        xtpg->default_format.colorspace = V4L2_COLORSPACE_SRGB;
        xvip_get_frame_size(&xtpg->xvip, &xtpg->default_format);

        bayer_phase = xtpg_get_bayer_phase(xtpg->vip_format->code);
        if (bayer_phase != XTPG_BAYER_PHASE_OFF)
                xtpg->bayer = true;

        xtpg->formats[0] = xtpg->default_format;
        if (xtpg->npads == 2)
                xtpg->formats[1] = xtpg->default_format;

        /* Initialize V4L2 subdevice and media entity */
        subdev = &xtpg->xvip.subdev;
        v4l2_subdev_init(subdev, &xtpg_ops);
        subdev->dev = &pdev->dev;
        subdev->internal_ops = &xtpg_internal_ops;
        strscpy(subdev->name, dev_name(&pdev->dev), sizeof(subdev->name));
        v4l2_set_subdevdata(subdev, xtpg);
        subdev->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
        subdev->entity.ops = &xtpg_media_ops;

        ret = media_entity_pads_init(&subdev->entity, xtpg->npads, xtpg->pads);
        if (ret < 0)
                goto error;

        v4l2_ctrl_handler_init(&xtpg->ctrl_handler, 3 + ARRAY_SIZE(xtpg_ctrls));

        xtpg->vblank = v4l2_ctrl_new_std(&xtpg->ctrl_handler, &xtpg_ctrl_ops,
                                         V4L2_CID_VBLANK, XTPG_MIN_VBLANK,
                                         XTPG_MAX_VBLANK, 1, 100);
        xtpg->hblank = v4l2_ctrl_new_std(&xtpg->ctrl_handler, &xtpg_ctrl_ops,
                                         V4L2_CID_HBLANK, XTPG_MIN_HBLANK,
                                         XTPG_MAX_HBLANK, 1, 100);
        xtpg->pattern = v4l2_ctrl_new_std_menu_items(&xtpg->ctrl_handler,
                                        &xtpg_ctrl_ops, V4L2_CID_TEST_PATTERN,
                                        ARRAY_SIZE(xtpg_pattern_strings) - 1,
                                        1, 9, xtpg_pattern_strings);

        for (i = 0; i < ARRAY_SIZE(xtpg_ctrls); i++)
                v4l2_ctrl_new_custom(&xtpg->ctrl_handler, &xtpg_ctrls[i], NULL);

        if (xtpg->ctrl_handler.error) {
                dev_err(&pdev->dev, "failed to add controls\n");
                ret = xtpg->ctrl_handler.error;
                goto error;
        }
        subdev->ctrl_handler = &xtpg->ctrl_handler;

        xtpg_update_pattern_control(xtpg, true, true);

        ret = v4l2_ctrl_handler_setup(&xtpg->ctrl_handler);
        if (ret < 0) {
                dev_err(&pdev->dev, "failed to set controls\n");
                goto error;
        }

        platform_set_drvdata(pdev, xtpg);

        xvip_print_version(&xtpg->xvip);

        ret = v4l2_async_register_subdev(subdev);
        if (ret < 0) {
                dev_err(&pdev->dev, "failed to register subdev\n");
                goto error;
        }

        return 0;

error:
        v4l2_ctrl_handler_free(&xtpg->ctrl_handler);
        media_entity_cleanup(&subdev->entity);
        xvtc_put(xtpg->vtc);
error_resource:
        xvip_cleanup_resources(&xtpg->xvip);
        return ret;
}

static void xtpg_remove(struct platform_device *pdev)
{
        struct xtpg_device *xtpg = platform_get_drvdata(pdev);
        struct v4l2_subdev *subdev = &xtpg->xvip.subdev;

        v4l2_async_unregister_subdev(subdev);
        v4l2_ctrl_handler_free(&xtpg->ctrl_handler);
        media_entity_cleanup(&subdev->entity);

        xvip_cleanup_resources(&xtpg->xvip);
}

static SIMPLE_DEV_PM_OPS(xtpg_pm_ops, xtpg_pm_suspend, xtpg_pm_resume);

static const struct of_device_id xtpg_of_id_table[] = {
        { .compatible = "xlnx,v-tpg-5.0" },
        { }
};
MODULE_DEVICE_TABLE(of, xtpg_of_id_table);

static struct platform_driver xtpg_driver = {
        .driver = {
                .name           = "xilinx-tpg",
                .pm             = &xtpg_pm_ops,
                .of_match_table = xtpg_of_id_table,
        },
        .probe                  = xtpg_probe,
        .remove                 = xtpg_remove,
};

module_platform_driver(xtpg_driver);

MODULE_AUTHOR("Laurent Pinchart <laurent.pinchart@ideasonboard.com>");
MODULE_DESCRIPTION("Xilinx Test Pattern Generator Driver");
MODULE_LICENSE("GPL v2");