// SPDX-License-Identifier: GPL-2.0-or-later
/*
 * saa7127 - Philips SAA7127/SAA7129 video encoder driver
 *
 * Copyright (C) 2003 Roy Bulter <rbulter@hetnet.nl>
 *
 * Based on SAA7126 video encoder driver by Gillem & Andreas Oberritter
 *
 * Copyright (C) 2000-2001 Gillem <htoa@gmx.net>
 * Copyright (C) 2002 Andreas Oberritter <obi@saftware.de>
 *
 * Based on Stadis 4:2:2 MPEG-2 Decoder Driver by Nathan Laredo
 *
 * Copyright (C) 1999 Nathan Laredo <laredo@gnu.org>
 *
 * This driver is designed for the Hauppauge 250/350 Linux driver
 * from the ivtv Project
 *
 * Copyright (C) 2003 Kevin Thayer <nufan_wfk@yahoo.com>
 *
 * Dual output support:
 * Copyright (C) 2004 Eric Varsanyi
 *
 * NTSC Tuning and 7.5 IRE Setup
 * Copyright (C) 2004  Chris Kennedy <c@groovy.org>
 *
 * VBI additions & cleanup:
 * Copyright (C) 2004, 2005 Hans Verkuil <hverkuil@kernel.org>
 *
 * Note: the saa7126 is identical to the saa7127, and the saa7128 is
 * identical to the saa7129, except that the saa7126 and saa7128 have
 * macrovision anti-taping support. This driver will almost certainly
 * work fine for those chips, except of course for the missing anti-taping
 * support.
 */


#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
#include <media/i2c/saa7127.h>

static int debug;
static int test_image;

MODULE_DESCRIPTION("Philips SAA7127/9 video encoder driver");
MODULE_AUTHOR("Kevin Thayer, Chris Kennedy, Hans Verkuil");
MODULE_LICENSE("GPL");
module_param(debug, int, 0644);
module_param(test_image, int, 0644);
MODULE_PARM_DESC(debug, "debug level (0-2)");
MODULE_PARM_DESC(test_image, "test_image (0-1)");


/*
 * SAA7127 registers
 */

#define SAA7127_REG_STATUS                           0x00
#define SAA7127_REG_WIDESCREEN_CONFIG                0x26
#define SAA7127_REG_WIDESCREEN_ENABLE                0x27
#define SAA7127_REG_BURST_START                      0x28
#define SAA7127_REG_BURST_END                        0x29
#define SAA7127_REG_COPYGEN_0                        0x2a
#define SAA7127_REG_COPYGEN_1                        0x2b
#define SAA7127_REG_COPYGEN_2                        0x2c
#define SAA7127_REG_OUTPUT_PORT_CONTROL              0x2d
#define SAA7127_REG_GAIN_LUMINANCE_RGB               0x38
#define SAA7127_REG_GAIN_COLORDIFF_RGB               0x39
#define SAA7127_REG_INPUT_PORT_CONTROL_1             0x3a
#define SAA7129_REG_FADE_KEY_COL2                    0x4f
#define SAA7127_REG_CHROMA_PHASE                     0x5a
#define SAA7127_REG_GAINU                            0x5b
#define SAA7127_REG_GAINV                            0x5c
#define SAA7127_REG_BLACK_LEVEL                      0x5d
#define SAA7127_REG_BLANKING_LEVEL                   0x5e
#define SAA7127_REG_VBI_BLANKING                     0x5f
#define SAA7127_REG_DAC_CONTROL                      0x61
#define SAA7127_REG_BURST_AMP                        0x62
#define SAA7127_REG_SUBC3                            0x63
#define SAA7127_REG_SUBC2                            0x64
#define SAA7127_REG_SUBC1                            0x65
#define SAA7127_REG_SUBC0                            0x66
#define SAA7127_REG_LINE_21_ODD_0                    0x67
#define SAA7127_REG_LINE_21_ODD_1                    0x68
#define SAA7127_REG_LINE_21_EVEN_0                   0x69
#define SAA7127_REG_LINE_21_EVEN_1                   0x6a
#define SAA7127_REG_RCV_PORT_CONTROL                 0x6b
#define SAA7127_REG_VTRIG                            0x6c
#define SAA7127_REG_HTRIG_HI                         0x6d
#define SAA7127_REG_MULTI                            0x6e
#define SAA7127_REG_CLOSED_CAPTION                   0x6f
#define SAA7127_REG_RCV2_OUTPUT_START                0x70
#define SAA7127_REG_RCV2_OUTPUT_END                  0x71
#define SAA7127_REG_RCV2_OUTPUT_MSBS                 0x72
#define SAA7127_REG_TTX_REQUEST_H_START              0x73
#define SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH       0x74
#define SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT        0x75
#define SAA7127_REG_TTX_ODD_REQ_VERT_START           0x76
#define SAA7127_REG_TTX_ODD_REQ_VERT_END             0x77
#define SAA7127_REG_TTX_EVEN_REQ_VERT_START          0x78
#define SAA7127_REG_TTX_EVEN_REQ_VERT_END            0x79
#define SAA7127_REG_FIRST_ACTIVE                     0x7a
#define SAA7127_REG_LAST_ACTIVE                      0x7b
#define SAA7127_REG_MSB_VERTICAL                     0x7c
#define SAA7127_REG_DISABLE_TTX_LINE_LO_0            0x7e
#define SAA7127_REG_DISABLE_TTX_LINE_LO_1            0x7f

/*
 **********************************************************************
 *
 *  Arrays with configuration parameters for the SAA7127
 *
 **********************************************************************
 */

struct i2c_reg_value {
        unsigned char reg;
        unsigned char value;
};

static const struct i2c_reg_value saa7129_init_config_extra[] = {
        { SAA7127_REG_OUTPUT_PORT_CONTROL,              0x38 },
        { SAA7127_REG_VTRIG,                            0xfa },
        { 0, 0 }
};

static const struct i2c_reg_value saa7127_init_config_common[] = {
        { SAA7127_REG_WIDESCREEN_CONFIG,                0x0d },
        { SAA7127_REG_WIDESCREEN_ENABLE,                0x00 },
        { SAA7127_REG_COPYGEN_0,                        0x77 },
        { SAA7127_REG_COPYGEN_1,                        0x41 },
        { SAA7127_REG_COPYGEN_2,                        0x00 }, /* Macrovision enable/disable */
        { SAA7127_REG_OUTPUT_PORT_CONTROL,              0xbf },
        { SAA7127_REG_GAIN_LUMINANCE_RGB,               0x00 },
        { SAA7127_REG_GAIN_COLORDIFF_RGB,               0x00 },
        { SAA7127_REG_INPUT_PORT_CONTROL_1,             0x80 }, /* for color bars */
        { SAA7127_REG_LINE_21_ODD_0,                    0x77 },
        { SAA7127_REG_LINE_21_ODD_1,                    0x41 },
        { SAA7127_REG_LINE_21_EVEN_0,                   0x88 },
        { SAA7127_REG_LINE_21_EVEN_1,                   0x41 },
        { SAA7127_REG_RCV_PORT_CONTROL,                 0x12 },
        { SAA7127_REG_VTRIG,                            0xf9 },
        { SAA7127_REG_HTRIG_HI,                         0x00 },
        { SAA7127_REG_RCV2_OUTPUT_START,                0x41 },
        { SAA7127_REG_RCV2_OUTPUT_END,                  0xc3 },
        { SAA7127_REG_RCV2_OUTPUT_MSBS,                 0x00 },
        { SAA7127_REG_TTX_REQUEST_H_START,              0x3e },
        { SAA7127_REG_TTX_REQUEST_H_DELAY_LENGTH,       0xb8 },
        { SAA7127_REG_CSYNC_ADVANCE_VSYNC_SHIFT,        0x03 },
        { SAA7127_REG_TTX_ODD_REQ_VERT_START,           0x15 },
        { SAA7127_REG_TTX_ODD_REQ_VERT_END,             0x16 },
        { SAA7127_REG_TTX_EVEN_REQ_VERT_START,          0x15 },
        { SAA7127_REG_TTX_EVEN_REQ_VERT_END,            0x16 },
        { SAA7127_REG_FIRST_ACTIVE,                     0x1a },
        { SAA7127_REG_LAST_ACTIVE,                      0x01 },
        { SAA7127_REG_MSB_VERTICAL,                     0xc0 },
        { SAA7127_REG_DISABLE_TTX_LINE_LO_0,            0x00 },
        { SAA7127_REG_DISABLE_TTX_LINE_LO_1,            0x00 },
        { 0, 0 }
};

#define SAA7127_60HZ_DAC_CONTROL 0x15
static const struct i2c_reg_value saa7127_init_config_60hz[] = {
        { SAA7127_REG_BURST_START,                      0x19 },
        /* BURST_END is also used as a chip ID in saa7127_probe */
        { SAA7127_REG_BURST_END,                        0x1d },
        { SAA7127_REG_CHROMA_PHASE,                     0xa3 },
        { SAA7127_REG_GAINU,                            0x98 },
        { SAA7127_REG_GAINV,                            0xd3 },
        { SAA7127_REG_BLACK_LEVEL,                      0x39 },
        { SAA7127_REG_BLANKING_LEVEL,                   0x2e },
        { SAA7127_REG_VBI_BLANKING,                     0x2e },
        { SAA7127_REG_DAC_CONTROL,                      0x15 },
        { SAA7127_REG_BURST_AMP,                        0x4d },
        { SAA7127_REG_SUBC3,                            0x1f },
        { SAA7127_REG_SUBC2,                            0x7c },
        { SAA7127_REG_SUBC1,                            0xf0 },
        { SAA7127_REG_SUBC0,                            0x21 },
        { SAA7127_REG_MULTI,                            0x90 },
        { SAA7127_REG_CLOSED_CAPTION,                   0x11 },
        { 0, 0 }
};

#define SAA7127_50HZ_PAL_DAC_CONTROL 0x02
static struct i2c_reg_value saa7127_init_config_50hz_pal[] = {
        { SAA7127_REG_BURST_START,                      0x21 },
        /* BURST_END is also used as a chip ID in saa7127_probe */
        { SAA7127_REG_BURST_END,                        0x1d },
        { SAA7127_REG_CHROMA_PHASE,                     0x3f },
        { SAA7127_REG_GAINU,                            0x7d },
        { SAA7127_REG_GAINV,                            0xaf },
        { SAA7127_REG_BLACK_LEVEL,                      0x33 },
        { SAA7127_REG_BLANKING_LEVEL,                   0x35 },
        { SAA7127_REG_VBI_BLANKING,                     0x35 },
        { SAA7127_REG_DAC_CONTROL,                      0x02 },
        { SAA7127_REG_BURST_AMP,                        0x2f },
        { SAA7127_REG_SUBC3,                            0xcb },
        { SAA7127_REG_SUBC2,                            0x8a },
        { SAA7127_REG_SUBC1,                            0x09 },
        { SAA7127_REG_SUBC0,                            0x2a },
        { SAA7127_REG_MULTI,                            0xa0 },
        { SAA7127_REG_CLOSED_CAPTION,                   0x00 },
        { 0, 0 }
};

#define SAA7127_50HZ_SECAM_DAC_CONTROL 0x08
static struct i2c_reg_value saa7127_init_config_50hz_secam[] = {
        { SAA7127_REG_BURST_START,                      0x21 },
        /* BURST_END is also used as a chip ID in saa7127_probe */
        { SAA7127_REG_BURST_END,                        0x1d },
        { SAA7127_REG_CHROMA_PHASE,                     0x3f },
        { SAA7127_REG_GAINU,                            0x6a },
        { SAA7127_REG_GAINV,                            0x81 },
        { SAA7127_REG_BLACK_LEVEL,                      0x33 },
        { SAA7127_REG_BLANKING_LEVEL,                   0x35 },
        { SAA7127_REG_VBI_BLANKING,                     0x35 },
        { SAA7127_REG_DAC_CONTROL,                      0x08 },
        { SAA7127_REG_BURST_AMP,                        0x2f },
        { SAA7127_REG_SUBC3,                            0xb2 },
        { SAA7127_REG_SUBC2,                            0x3b },
        { SAA7127_REG_SUBC1,                            0xa3 },
        { SAA7127_REG_SUBC0,                            0x28 },
        { SAA7127_REG_MULTI,                            0x90 },
        { SAA7127_REG_CLOSED_CAPTION,                   0x00 },
        { 0, 0 }
};

/*
 **********************************************************************
 *
 *  Encoder Struct, holds the configuration state of the encoder
 *
 **********************************************************************
 */

enum saa712x_model {
        SAA7127,
        SAA7129,
};

struct saa7127_state {
        struct v4l2_subdev sd;
        v4l2_std_id std;
        enum saa712x_model ident;
        enum saa7127_input_type input_type;
        enum saa7127_output_type output_type;
        int video_enable;
        int wss_enable;
        u16 wss_mode;
        int cc_enable;
        u16 cc_data;
        int xds_enable;
        u16 xds_data;
        int vps_enable;
        u8 vps_data[5];
        u8 reg_2d;
        u8 reg_3a;
        u8 reg_3a_cb;   /* colorbar bit */
        u8 reg_61;
};

static inline struct saa7127_state *to_state(struct v4l2_subdev *sd)
{
        return container_of(sd, struct saa7127_state, sd);
}

static const char * const output_strs[] =
{
        "S-Video + Composite",
        "Composite",
        "S-Video",
        "RGB",
        "YUV C",
        "YUV V"
};

static const char * const wss_strs[] = {
        "invalid",
        "letterbox 14:9 center",
        "letterbox 14:9 top",
        "invalid",
        "letterbox 16:9 top",
        "invalid",
        "invalid",
        "16:9 full format anamorphic",
        "4:3 full format",
        "invalid",
        "invalid",
        "letterbox 16:9 center",
        "invalid",
        "letterbox >16:9 center",
        "14:9 full format center",
        "invalid",
};

/* ----------------------------------------------------------------------- */

static int saa7127_read(struct v4l2_subdev *sd, u8 reg)
{
        struct i2c_client *client = v4l2_get_subdevdata(sd);

        return i2c_smbus_read_byte_data(client, reg);
}

/* ----------------------------------------------------------------------- */

static int saa7127_write(struct v4l2_subdev *sd, u8 reg, u8 val)
{
        struct i2c_client *client = v4l2_get_subdevdata(sd);
        int i;

        for (i = 0; i < 3; i++) {
                if (i2c_smbus_write_byte_data(client, reg, val) == 0)
                        return 0;
        }
        v4l2_err(sd, "I2C Write Problem\n");
        return -1;
}

/* ----------------------------------------------------------------------- */

static int saa7127_write_inittab(struct v4l2_subdev *sd,
                                 const struct i2c_reg_value *regs)
{
        while (regs->reg != 0) {
                saa7127_write(sd, regs->reg, regs->value);
                regs++;
        }
        return 0;
}

/* ----------------------------------------------------------------------- */

static int saa7127_set_vps(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
{
        struct saa7127_state *state = to_state(sd);
        int enable = (data->line != 0);

        if (enable && (data->field != 0 || data->line != 16))
                return -EINVAL;
        if (state->vps_enable != enable) {
                v4l2_dbg(1, debug, sd, "Turn VPS Signal %s\n", enable ? "on" : "off");
                saa7127_write(sd, 0x54, enable << 7);
                state->vps_enable = enable;
        }
        if (!enable)
                return 0;

        state->vps_data[0] = data->data[2];
        state->vps_data[1] = data->data[8];
        state->vps_data[2] = data->data[9];
        state->vps_data[3] = data->data[10];
        state->vps_data[4] = data->data[11];
        v4l2_dbg(1, debug, sd, "Set VPS data %*ph\n", 5, state->vps_data);
        saa7127_write(sd, 0x55, state->vps_data[0]);
        saa7127_write(sd, 0x56, state->vps_data[1]);
        saa7127_write(sd, 0x57, state->vps_data[2]);
        saa7127_write(sd, 0x58, state->vps_data[3]);
        saa7127_write(sd, 0x59, state->vps_data[4]);
        return 0;
}

/* ----------------------------------------------------------------------- */

static int saa7127_set_cc(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
{
        struct saa7127_state *state = to_state(sd);
        u16 cc = data->data[1] << 8 | data->data[0];
        int enable = (data->line != 0);

        if (enable && (data->field != 0 || data->line != 21))
                return -EINVAL;
        if (state->cc_enable != enable) {
                v4l2_dbg(1, debug, sd,
                        "Turn CC %s\n", enable ? "on" : "off");
                saa7127_write(sd, SAA7127_REG_CLOSED_CAPTION,
                        (state->xds_enable << 7) | (enable << 6) | 0x11);
                state->cc_enable = enable;
        }
        if (!enable)
                return 0;

        v4l2_dbg(2, debug, sd, "CC data: %04x\n", cc);
        saa7127_write(sd, SAA7127_REG_LINE_21_ODD_0, cc & 0xff);
        saa7127_write(sd, SAA7127_REG_LINE_21_ODD_1, cc >> 8);
        state->cc_data = cc;
        return 0;
}

/* ----------------------------------------------------------------------- */

static int saa7127_set_xds(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
{
        struct saa7127_state *state = to_state(sd);
        u16 xds = data->data[1] << 8 | data->data[0];
        int enable = (data->line != 0);

        if (enable && (data->field != 1 || data->line != 21))
                return -EINVAL;
        if (state->xds_enable != enable) {
                v4l2_dbg(1, debug, sd, "Turn XDS %s\n", enable ? "on" : "off");
                saa7127_write(sd, SAA7127_REG_CLOSED_CAPTION,
                                (enable << 7) | (state->cc_enable << 6) | 0x11);
                state->xds_enable = enable;
        }
        if (!enable)
                return 0;

        v4l2_dbg(2, debug, sd, "XDS data: %04x\n", xds);
        saa7127_write(sd, SAA7127_REG_LINE_21_EVEN_0, xds & 0xff);
        saa7127_write(sd, SAA7127_REG_LINE_21_EVEN_1, xds >> 8);
        state->xds_data = xds;
        return 0;
}

/* ----------------------------------------------------------------------- */

static int saa7127_set_wss(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
{
        struct saa7127_state *state = to_state(sd);
        int enable = (data->line != 0);

        if (enable && (data->field != 0 || data->line != 23))
                return -EINVAL;
        if (state->wss_enable != enable) {
                v4l2_dbg(1, debug, sd, "Turn WSS %s\n", enable ? "on" : "off");
                saa7127_write(sd, 0x27, enable << 7);
                state->wss_enable = enable;
        }
        if (!enable)
                return 0;

        saa7127_write(sd, 0x26, data->data[0]);
        saa7127_write(sd, 0x27, 0x80 | (data->data[1] & 0x3f));
        v4l2_dbg(1, debug, sd,
                "WSS mode: %s\n", wss_strs[data->data[0] & 0xf]);
        state->wss_mode = (data->data[1] & 0x3f) << 8 | data->data[0];
        return 0;
}

/* ----------------------------------------------------------------------- */

static int saa7127_set_video_enable(struct v4l2_subdev *sd, int enable)
{
        struct saa7127_state *state = to_state(sd);

        if (enable) {
                v4l2_dbg(1, debug, sd, "Enable Video Output\n");
                saa7127_write(sd, 0x2d, state->reg_2d);
                saa7127_write(sd, 0x61, state->reg_61);
        } else {
                v4l2_dbg(1, debug, sd, "Disable Video Output\n");
                saa7127_write(sd, 0x2d, (state->reg_2d & 0xf0));
                saa7127_write(sd, 0x61, (state->reg_61 | 0xc0));
        }
        state->video_enable = enable;
        return 0;
}

/* ----------------------------------------------------------------------- */

static int saa7127_set_std(struct v4l2_subdev *sd, v4l2_std_id std)
{
        struct saa7127_state *state = to_state(sd);
        const struct i2c_reg_value *inittab;

        if (std & V4L2_STD_525_60) {
                v4l2_dbg(1, debug, sd, "Selecting 60 Hz video Standard\n");
                inittab = saa7127_init_config_60hz;
                state->reg_61 = SAA7127_60HZ_DAC_CONTROL;

        } else if (state->ident == SAA7129 &&
                   (std & V4L2_STD_SECAM) &&
                   !(std & (V4L2_STD_625_50 & ~V4L2_STD_SECAM))) {

                /* If and only if SECAM, with a SAA712[89] */
                v4l2_dbg(1, debug, sd,
                         "Selecting 50 Hz SECAM video Standard\n");
                inittab = saa7127_init_config_50hz_secam;
                state->reg_61 = SAA7127_50HZ_SECAM_DAC_CONTROL;

        } else {
                v4l2_dbg(1, debug, sd, "Selecting 50 Hz PAL video Standard\n");
                inittab = saa7127_init_config_50hz_pal;
                state->reg_61 = SAA7127_50HZ_PAL_DAC_CONTROL;
        }

        /* Write Table */
        saa7127_write_inittab(sd, inittab);
        state->std = std;
        return 0;
}

/* ----------------------------------------------------------------------- */

static int saa7127_set_output_type(struct v4l2_subdev *sd, int output)
{
        struct saa7127_state *state = to_state(sd);

        switch (output) {
        case SAA7127_OUTPUT_TYPE_RGB:
                state->reg_2d = 0x0f;   /* RGB + CVBS (for sync) */
                state->reg_3a = 0x13;   /* by default switch YUV to RGB-matrix on */
                break;

        case SAA7127_OUTPUT_TYPE_COMPOSITE:
                if (state->ident == SAA7129)
                        state->reg_2d = 0x20;   /* CVBS only */
                else
                        state->reg_2d = 0x08;   /* 00001000 CVBS only, RGB DAC's off (high impedance mode) */
                state->reg_3a = 0x13;   /* by default switch YUV to RGB-matrix on */
                break;

        case SAA7127_OUTPUT_TYPE_SVIDEO:
                if (state->ident == SAA7129)
                        state->reg_2d = 0x18;   /* Y + C */
                else
                        state->reg_2d = 0xff;   /*11111111  croma -> R, luma -> CVBS + G + B */
                state->reg_3a = 0x13;   /* by default switch YUV to RGB-matrix on */
                break;

        case SAA7127_OUTPUT_TYPE_YUV_V:
                state->reg_2d = 0x4f;   /* reg 2D = 01001111, all DAC's on, RGB + VBS */
                state->reg_3a = 0x0b;   /* reg 3A = 00001011, bypass RGB-matrix */
                break;

        case SAA7127_OUTPUT_TYPE_YUV_C:
                state->reg_2d = 0x0f;   /* reg 2D = 00001111, all DAC's on, RGB + CVBS */
                state->reg_3a = 0x0b;   /* reg 3A = 00001011, bypass RGB-matrix */
                break;

        case SAA7127_OUTPUT_TYPE_BOTH:
                if (state->ident == SAA7129)
                        state->reg_2d = 0x38;
                else
                        state->reg_2d = 0xbf;
                state->reg_3a = 0x13;   /* by default switch YUV to RGB-matrix on */
                break;

        default:
                return -EINVAL;
        }
        v4l2_dbg(1, debug, sd,
                "Selecting %s output type\n", output_strs[output]);

        /* Configure Encoder */
        saa7127_write(sd, 0x2d, state->reg_2d);
        saa7127_write(sd, 0x3a, state->reg_3a | state->reg_3a_cb);
        state->output_type = output;
        return 0;
}

/* ----------------------------------------------------------------------- */

static int saa7127_set_input_type(struct v4l2_subdev *sd, int input)
{
        struct saa7127_state *state = to_state(sd);

        switch (input) {
        case SAA7127_INPUT_TYPE_NORMAL: /* avia */
                v4l2_dbg(1, debug, sd, "Selecting Normal Encoder Input\n");
                state->reg_3a_cb = 0;
                break;

        case SAA7127_INPUT_TYPE_TEST_IMAGE:     /* color bar */
                v4l2_dbg(1, debug, sd, "Selecting Color Bar generator\n");
                state->reg_3a_cb = 0x80;
                break;

        default:
                return -EINVAL;
        }
        saa7127_write(sd, 0x3a, state->reg_3a | state->reg_3a_cb);
        state->input_type = input;
        return 0;
}

/* ----------------------------------------------------------------------- */

static int saa7127_s_std_output(struct v4l2_subdev *sd, v4l2_std_id std)
{
        struct saa7127_state *state = to_state(sd);

        if (state->std == std)
                return 0;
        return saa7127_set_std(sd, std);
}

static int saa7127_s_routing(struct v4l2_subdev *sd,
                             u32 input, u32 output, u32 config)
{
        struct saa7127_state *state = to_state(sd);
        int rc = 0;

        if (state->input_type != input)
                rc = saa7127_set_input_type(sd, input);
        if (rc == 0 && state->output_type != output)
                rc = saa7127_set_output_type(sd, output);
        return rc;
}

static int saa7127_s_stream(struct v4l2_subdev *sd, int enable)
{
        struct saa7127_state *state = to_state(sd);

        if (state->video_enable == enable)
                return 0;
        return saa7127_set_video_enable(sd, enable);
}

static int saa7127_g_sliced_fmt(struct v4l2_subdev *sd, struct v4l2_sliced_vbi_format *fmt)
{
        struct saa7127_state *state = to_state(sd);

        memset(fmt->service_lines, 0, sizeof(fmt->service_lines));
        if (state->vps_enable)
                fmt->service_lines[0][16] = V4L2_SLICED_VPS;
        if (state->wss_enable)
                fmt->service_lines[0][23] = V4L2_SLICED_WSS_625;
        if (state->cc_enable) {
                fmt->service_lines[0][21] = V4L2_SLICED_CAPTION_525;
                fmt->service_lines[1][21] = V4L2_SLICED_CAPTION_525;
        }
        fmt->service_set =
                (state->vps_enable ? V4L2_SLICED_VPS : 0) |
                (state->wss_enable ? V4L2_SLICED_WSS_625 : 0) |
                (state->cc_enable ? V4L2_SLICED_CAPTION_525 : 0);
        return 0;
}

static int saa7127_s_vbi_data(struct v4l2_subdev *sd, const struct v4l2_sliced_vbi_data *data)
{
        switch (data->id) {
        case V4L2_SLICED_WSS_625:
                return saa7127_set_wss(sd, data);
        case V4L2_SLICED_VPS:
                return saa7127_set_vps(sd, data);
        case V4L2_SLICED_CAPTION_525:
                if (data->field == 0)
                        return saa7127_set_cc(sd, data);
                return saa7127_set_xds(sd, data);
        default:
                return -EINVAL;
        }
        return 0;
}

#ifdef CONFIG_VIDEO_ADV_DEBUG
static int saa7127_g_register(struct v4l2_subdev *sd, struct v4l2_dbg_register *reg)
{
        reg->val = saa7127_read(sd, reg->reg & 0xff);
        reg->size = 1;
        return 0;
}

static int saa7127_s_register(struct v4l2_subdev *sd, const struct v4l2_dbg_register *reg)
{
        saa7127_write(sd, reg->reg & 0xff, reg->val & 0xff);
        return 0;
}
#endif

static int saa7127_log_status(struct v4l2_subdev *sd)
{
        struct saa7127_state *state = to_state(sd);

        v4l2_info(sd, "Standard: %s\n", (state->std & V4L2_STD_525_60) ? "60 Hz" : "50 Hz");
        v4l2_info(sd, "Input:    %s\n", state->input_type ?  "color bars" : "normal");
        v4l2_info(sd, "Output:   %s\n", state->video_enable ?
                        output_strs[state->output_type] : "disabled");
        v4l2_info(sd, "WSS:      %s\n", state->wss_enable ?
                        wss_strs[state->wss_mode] : "disabled");
        v4l2_info(sd, "VPS:      %s\n", state->vps_enable ? "enabled" : "disabled");
        v4l2_info(sd, "CC:       %s\n", state->cc_enable ? "enabled" : "disabled");
        return 0;
}

/* ----------------------------------------------------------------------- */

static const struct v4l2_subdev_core_ops saa7127_core_ops = {
        .log_status = saa7127_log_status,
#ifdef CONFIG_VIDEO_ADV_DEBUG
        .g_register = saa7127_g_register,
        .s_register = saa7127_s_register,
#endif
};

static const struct v4l2_subdev_video_ops saa7127_video_ops = {
        .s_std_output = saa7127_s_std_output,
        .s_routing = saa7127_s_routing,
        .s_stream = saa7127_s_stream,
};

static const struct v4l2_subdev_vbi_ops saa7127_vbi_ops = {
        .s_vbi_data = saa7127_s_vbi_data,
        .g_sliced_fmt = saa7127_g_sliced_fmt,
};

static const struct v4l2_subdev_ops saa7127_ops = {
        .core = &saa7127_core_ops,
        .video = &saa7127_video_ops,
        .vbi = &saa7127_vbi_ops,
};

/* ----------------------------------------------------------------------- */

static int saa7127_probe(struct i2c_client *client)
{
        const struct i2c_device_id *id = i2c_client_get_device_id(client);
        struct saa7127_state *state;
        struct v4l2_subdev *sd;
        struct v4l2_sliced_vbi_data vbi = { 0, 0, 0, 0 };  /* set to disabled */

        /* Check if the adapter supports the needed features */
        if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA))
                return -EIO;

        v4l_dbg(1, debug, client, "detecting saa7127 client on address 0x%x\n",
                        client->addr << 1);

        state = devm_kzalloc(&client->dev, sizeof(*state), GFP_KERNEL);
        if (state == NULL)
                return -ENOMEM;

        sd = &state->sd;
        v4l2_i2c_subdev_init(sd, client, &saa7127_ops);

        /* First test register 0: Bits 5-7 are a version ID (should be 0),
           and bit 2 should also be 0.
           This is rather general, so the second test is more specific and
           looks at the 'ending point of burst in clock cycles' which is
           0x1d after a reset and not expected to ever change. */
        if ((saa7127_read(sd, 0) & 0xe4) != 0 ||
                        (saa7127_read(sd, 0x29) & 0x3f) != 0x1d) {
                v4l2_dbg(1, debug, sd, "saa7127 not found\n");
                return -ENODEV;
        }

        if (id->driver_data) {  /* Chip type is already known */
                state->ident = id->driver_data;
        } else {                /* Needs detection */
                int read_result;

                /* Detect if it's an saa7129 */
                read_result = saa7127_read(sd, SAA7129_REG_FADE_KEY_COL2);
                saa7127_write(sd, SAA7129_REG_FADE_KEY_COL2, 0xaa);
                if (saa7127_read(sd, SAA7129_REG_FADE_KEY_COL2) == 0xaa) {
                        saa7127_write(sd, SAA7129_REG_FADE_KEY_COL2,
                                        read_result);
                        state->ident = SAA7129;
                        strscpy(client->name, "saa7129", I2C_NAME_SIZE);
                } else {
                        state->ident = SAA7127;
                        strscpy(client->name, "saa7127", I2C_NAME_SIZE);
                }
        }

        v4l2_info(sd, "%s found @ 0x%x (%s)\n", client->name,
                        client->addr << 1, client->adapter->name);

        v4l2_dbg(1, debug, sd, "Configuring encoder\n");
        saa7127_write_inittab(sd, saa7127_init_config_common);
        saa7127_set_std(sd, V4L2_STD_NTSC);
        saa7127_set_output_type(sd, SAA7127_OUTPUT_TYPE_BOTH);
        saa7127_set_vps(sd, &vbi);
        saa7127_set_wss(sd, &vbi);
        saa7127_set_cc(sd, &vbi);
        saa7127_set_xds(sd, &vbi);
        if (test_image == 1)
                /* The Encoder has an internal Colorbar generator */
                /* This can be used for debugging */
                saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_TEST_IMAGE);
        else
                saa7127_set_input_type(sd, SAA7127_INPUT_TYPE_NORMAL);
        saa7127_set_video_enable(sd, 1);

        if (state->ident == SAA7129)
                saa7127_write_inittab(sd, saa7129_init_config_extra);
        return 0;
}

/* ----------------------------------------------------------------------- */

static void saa7127_remove(struct i2c_client *client)
{
        struct v4l2_subdev *sd = i2c_get_clientdata(client);

        v4l2_device_unregister_subdev(sd);
        /* Turn off TV output */
        saa7127_set_video_enable(sd, 0);
}

/* ----------------------------------------------------------------------- */

static const struct i2c_device_id saa7127_id[] = {
        { .name = "saa7127_auto", .driver_data = 0 },   /* auto-detection */
        { .name = "saa7126", .driver_data = SAA7127 },
        { .name = "saa7127", .driver_data = SAA7127 },
        { .name = "saa7128", .driver_data = SAA7129 },
        { .name = "saa7129", .driver_data = SAA7129 },
        { }
};
MODULE_DEVICE_TABLE(i2c, saa7127_id);

static struct i2c_driver saa7127_driver = {
        .driver = {
                .name   = "saa7127",
        },
        .probe          = saa7127_probe,
        .remove         = saa7127_remove,
        .id_table       = saa7127_id,
};

module_i2c_driver(saa7127_driver);