// SPDX-License-Identifier: GPL-2.0
/*
 * Hantro VPU codec driver
 *
 * Copyright (C) 2018 Rockchip Electronics Co., Ltd.
 */

#include <linux/unaligned.h>
#include <media/v4l2-mem2mem.h>
#include "hantro_jpeg.h"
#include "hantro.h"
#include "hantro_v4l2.h"
#include "hantro_hw.h"
#include "hantro_h1_regs.h"

#define H1_JPEG_QUANT_TABLE_COUNT 16

static void hantro_h1_set_src_img_ctrl(struct hantro_dev *vpu,
                                       struct hantro_ctx *ctx)
{
        u32 overfill_r, overfill_b;
        u32 reg;

        /*
         * The format width and height are already macroblock aligned
         * by .vidioc_s_fmt_vid_cap_mplane() callback. Destination
         * format width and height can be further modified by
         * .vidioc_s_selection(), and the width is 4-aligned.
         */
        overfill_r = ctx->src_fmt.width - ctx->dst_fmt.width;
        overfill_b = ctx->src_fmt.height - ctx->dst_fmt.height;

        reg = H1_REG_IN_IMG_CTRL_ROW_LEN(ctx->src_fmt.width)
                | H1_REG_IN_IMG_CTRL_OVRFLR_D4(overfill_r / 4)
                | H1_REG_IN_IMG_CTRL_OVRFLB(overfill_b)
                | H1_REG_IN_IMG_CTRL_FMT(ctx->vpu_src_fmt->enc_fmt);
        vepu_write_relaxed(vpu, reg, H1_REG_IN_IMG_CTRL);
}

static void hantro_h1_jpeg_enc_set_buffers(struct hantro_dev *vpu,
                                           struct hantro_ctx *ctx,
                                           struct vb2_buffer *src_buf,
                                           struct vb2_buffer *dst_buf)
{
        struct v4l2_pix_format_mplane *pix_fmt = &ctx->src_fmt;
        dma_addr_t src[3];
        u32 size_left;

        size_left = vb2_plane_size(dst_buf, 0) - ctx->vpu_dst_fmt->header_size;
        if (WARN_ON(vb2_plane_size(dst_buf, 0) < ctx->vpu_dst_fmt->header_size))
                size_left = 0;

        WARN_ON(pix_fmt->num_planes > 3);

        vepu_write_relaxed(vpu, vb2_dma_contig_plane_dma_addr(dst_buf, 0) +
                                ctx->vpu_dst_fmt->header_size,
                           H1_REG_ADDR_OUTPUT_STREAM);
        vepu_write_relaxed(vpu, size_left, H1_REG_STR_BUF_LIMIT);

        if (pix_fmt->num_planes == 1) {
                src[0] = vb2_dma_contig_plane_dma_addr(src_buf, 0);
                /* single plane formats we supported are all interlaced */
                vepu_write_relaxed(vpu, src[0], H1_REG_ADDR_IN_PLANE_0);
        } else if (pix_fmt->num_planes == 2) {
                src[0] = vb2_dma_contig_plane_dma_addr(src_buf, 0);
                src[1] = vb2_dma_contig_plane_dma_addr(src_buf, 1);
                vepu_write_relaxed(vpu, src[0], H1_REG_ADDR_IN_PLANE_0);
                vepu_write_relaxed(vpu, src[1], H1_REG_ADDR_IN_PLANE_1);
        } else {
                src[0] = vb2_dma_contig_plane_dma_addr(src_buf, 0);
                src[1] = vb2_dma_contig_plane_dma_addr(src_buf, 1);
                src[2] = vb2_dma_contig_plane_dma_addr(src_buf, 2);
                vepu_write_relaxed(vpu, src[0], H1_REG_ADDR_IN_PLANE_0);
                vepu_write_relaxed(vpu, src[1], H1_REG_ADDR_IN_PLANE_1);
                vepu_write_relaxed(vpu, src[2], H1_REG_ADDR_IN_PLANE_2);
        }
}

static void
hantro_h1_jpeg_enc_set_qtable(struct hantro_dev *vpu,
                              unsigned char *luma_qtable,
                              unsigned char *chroma_qtable)
{
        u32 reg, i;
        __be32 *luma_qtable_p;
        __be32 *chroma_qtable_p;

        luma_qtable_p = (__be32 *)luma_qtable;
        chroma_qtable_p = (__be32 *)chroma_qtable;

        /*
         * Quantization table registers must be written in contiguous blocks.
         * DO NOT collapse the below two "for" loops into one.
         */
        for (i = 0; i < H1_JPEG_QUANT_TABLE_COUNT; i++) {
                reg = get_unaligned_be32(&luma_qtable_p[i]);
                vepu_write_relaxed(vpu, reg, H1_REG_JPEG_LUMA_QUAT(i));
        }

        for (i = 0; i < H1_JPEG_QUANT_TABLE_COUNT; i++) {
                reg = get_unaligned_be32(&chroma_qtable_p[i]);
                vepu_write_relaxed(vpu, reg, H1_REG_JPEG_CHROMA_QUAT(i));
        }
}

int hantro_h1_jpeg_enc_run(struct hantro_ctx *ctx)
{
        struct hantro_dev *vpu = ctx->dev;
        struct vb2_v4l2_buffer *src_buf, *dst_buf;
        struct hantro_jpeg_ctx jpeg_ctx;
        u32 reg;

        src_buf = hantro_get_src_buf(ctx);
        dst_buf = hantro_get_dst_buf(ctx);

        hantro_start_prepare_run(ctx);

        memset(&jpeg_ctx, 0, sizeof(jpeg_ctx));
        jpeg_ctx.buffer = vb2_plane_vaddr(&dst_buf->vb2_buf, 0);
        jpeg_ctx.width = ctx->dst_fmt.width;
        jpeg_ctx.height = ctx->dst_fmt.height;
        jpeg_ctx.quality = ctx->jpeg_quality;
        hantro_jpeg_header_assemble(&jpeg_ctx);

        /* Switch to JPEG encoder mode before writing registers */
        vepu_write_relaxed(vpu, H1_REG_ENC_CTRL_ENC_MODE_JPEG,
                           H1_REG_ENC_CTRL);

        hantro_h1_set_src_img_ctrl(vpu, ctx);
        hantro_h1_jpeg_enc_set_buffers(vpu, ctx, &src_buf->vb2_buf,
                                       &dst_buf->vb2_buf);
        hantro_h1_jpeg_enc_set_qtable(vpu, jpeg_ctx.hw_luma_qtable,
                                      jpeg_ctx.hw_chroma_qtable);

        reg = H1_REG_AXI_CTRL_OUTPUT_SWAP16
                | H1_REG_AXI_CTRL_INPUT_SWAP16
                | H1_REG_AXI_CTRL_BURST_LEN(16)
                | H1_REG_AXI_CTRL_OUTPUT_SWAP32
                | H1_REG_AXI_CTRL_INPUT_SWAP32
                | H1_REG_AXI_CTRL_OUTPUT_SWAP8
                | H1_REG_AXI_CTRL_INPUT_SWAP8;
        /* Make sure that all registers are written at this point. */
        vepu_write(vpu, reg, H1_REG_AXI_CTRL);

        reg = H1_REG_ENC_CTRL_WIDTH(MB_WIDTH(ctx->src_fmt.width))
                | H1_REG_ENC_CTRL_HEIGHT(MB_HEIGHT(ctx->src_fmt.height))
                | H1_REG_ENC_CTRL_ENC_MODE_JPEG
                | H1_REG_ENC_PIC_INTRA
                | H1_REG_ENC_CTRL_EN_BIT;

        hantro_end_prepare_run(ctx);

        vepu_write(vpu, reg, H1_REG_ENC_CTRL);

        return 0;
}

void hantro_h1_jpeg_enc_done(struct hantro_ctx *ctx)
{
        struct hantro_dev *vpu = ctx->dev;
        u32 bytesused = vepu_read(vpu, H1_REG_STR_BUF_LIMIT) / 8;
        struct vb2_v4l2_buffer *dst_buf = hantro_get_dst_buf(ctx);

        vb2_set_plane_payload(&dst_buf->vb2_buf, 0,
                              ctx->vpu_dst_fmt->header_size + bytesused);
}