/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
   cx231xx-pcb-cfg.h - driver for Conexant
                Cx23100/101/102 USB video capture devices

   Copyright (C) 2008 <srinivasa.deevi at conexant dot com>

 */

#ifndef _PCB_CONFIG_H_
#define _PCB_CONFIG_H_

#include <linux/init.h>
#include <linux/module.h>

/***************************************************************************
                                * Class Information *
***************************************************************************/
#define CLASS_DEFAULT       0xFF

enum VENDOR_REQUEST_TYPE {
        /* Set/Get I2C */
        VRT_SET_I2C0 = 0x0,
        VRT_SET_I2C1 = 0x1,
        VRT_SET_I2C2 = 0x2,
        VRT_GET_I2C0 = 0x4,
        VRT_GET_I2C1 = 0x5,
        VRT_GET_I2C2 = 0x6,

        /* Set/Get GPIO */
        VRT_SET_GPIO = 0x8,
        VRT_GET_GPIO = 0x9,

        /* Set/Get GPIE */
        VRT_SET_GPIE = 0xA,
        VRT_GET_GPIE = 0xB,

        /* Set/Get Register Control/Status */
        VRT_SET_REGISTER = 0xC,
        VRT_GET_REGISTER = 0xD,

        /* Get Extended Compat ID Descriptor */
        VRT_GET_EXTCID_DESC = 0xFF,
};

enum BYTE_ENABLE_MASK {
        ENABLE_ONE_BYTE = 0x1,
        ENABLE_TWE_BYTE = 0x3,
        ENABLE_THREE_BYTE = 0x7,
        ENABLE_FOUR_BYTE = 0xF,
};

#define SPEED_MASK      0x1
enum USB_SPEED{
        FULL_SPEED = 0x0,       /* 0: full speed */
        HIGH_SPEED = 0x1        /* 1: high speed */
};

#define TS_MASK         0x6
#define NO_TS_PORT      0x0     /* 2'b00: Neither port used. PCB not a Hybrid,
                                   only offers Analog TV or Video */
#define TS1_PORT        0x4     /* 2'b10: TS1 Input (Hybrid mode :
                                Digital or External Analog/Compressed source) */
#define TS1_TS2_PORT    0x6     /* 2'b11: TS1 & TS2 Inputs
                                (Dual inputs from Digital and/or
                                External Analog/Compressed sources) */
#define TS1_EXT_CLOCK   0x6     /* 2'b11: TS1 & TS2 as selector
                                                to external clock */
#define TS1VIP_TS2_PORT 0x2     /* 2'b01: TS1 used as 656/VIP Output,
                                   TS2 Input (from Compressor) */

#define EAVP_MASK       0x8
enum EAV_PRESENT{
        NO_EXTERNAL_AV = 0x0,   /* 0: No External A/V inputs
                                                (no need for i2s block),
                                                Analog Tuner must be present */
        EXTERNAL_AV = 0x8       /* 1: External A/V inputs
                                                present (requires i2s blk) */
};

#define ATM_MASK        0x30
enum AT_MODE{
        DIF_TUNER = 0x30,       /* 2'b11: IF Tuner (requires use of DIF) */
        BASEBAND_SOUND = 0x20,  /* 2'b10: Baseband Composite &
                                                Sound-IF Signals present */
        NO_TUNER = 0x10         /* 2'b0x: No Analog Tuner present */
};

#define PWR_SEL_MASK    0x40
#define SELF_POWER      0x0     /* 0: self power */
#define BUS_POWER       0x40    /* 1: bus power */

enum USB_POWE_TYPE{
        USB_SELF_POWER = 0,
        USB_BUS_POWER
};

#define BO_0_MASK       0x80
enum AVDEC_STATUS{
        AVDEC_DISABLE = 0x0,    /* 0: A/V Decoder Disabled */
        AVDEC_ENABLE = 0x80     /* 1: A/V Decoder Enabled */
};

#define BO_1_MASK       0x100

#define BUSPOWER_MASK   0xC4    /* for Polaris spec 0.8 */
#define SELFPOWER_MASK  0x86

/***************************************************************************/
#define NOT_DECIDE_YET  0xFE
#define NOT_SUPPORTED   0xFF

/***************************************************************************
                                * for mod field use *
***************************************************************************/
#define MOD_DIGITAL     0x1
#define MOD_ANALOG      0x2
#define MOD_DIF         0x4
#define MOD_EXTERNAL    0x8
#define CAP_ALL_MOD     0x0f

/***************************************************************************
                                * source define *
***************************************************************************/
#define SOURCE_DIGITAL          0x1
#define SOURCE_ANALOG           0x2
#define SOURCE_DIF              0x4
#define SOURCE_EXTERNAL         0x8
#define SOURCE_TS_BDA                   0x10
#define SOURCE_TS_ENCODE                0x20
#define SOURCE_TS_EXTERNAL      0x40

/***************************************************************************
                                * interface information define *
***************************************************************************/
struct INTERFACE_INFO {
        u8 interrupt_index;
        u8 ts1_index;
        u8 ts2_index;
        u8 audio_index;
        u8 video_index;
        u8 vanc_index;          /* VBI */
        u8 hanc_index;          /* Sliced CC */
        u8 ir_index;
};

enum INDEX_INTERFACE_INFO{
        INDEX_INTERRUPT = 0x0,
        INDEX_TS1,
        INDEX_TS2,
        INDEX_AUDIO,
        INDEX_VIDEO,
        INDEX_VANC,
        INDEX_HANC,
        INDEX_IR,
};

/***************************************************************************
                                * configuration information define *
***************************************************************************/
struct CONFIG_INFO {
        u8 config_index;
        struct INTERFACE_INFO interface_info;
};

struct pcb_config {
        u8 index;
        u8 type;                /* bus power or self power,
                                           self power--0, bus_power--1 */
        u8 speed;               /* usb speed, 2.0--1, 1.1--0 */
        u8 mode;                /* digital , anlog, dif or external A/V */
        u32 ts1_source;         /* three source -- BDA,External,encode */
        u32 ts2_source;
        u32 analog_source;
        u8 digital_index;       /* bus-power used */
        u8 analog_index;        /* bus-power used */
        u8 dif_index;           /* bus-power used */
        u8 external_index;      /* bus-power used */
        u8 config_num;          /* current config num, 0,1,2,
                                                   for self-power, always 0 */
        struct CONFIG_INFO hs_config_info[3];
        struct CONFIG_INFO fs_config_info[3];
};

enum INDEX_PCB_CONFIG{
        INDEX_SELFPOWER_DIGITAL_ONLY = 0x0,
        INDEX_SELFPOWER_DUAL_DIGITAL,
        INDEX_SELFPOWER_ANALOG_ONLY,
        INDEX_SELFPOWER_DUAL,
        INDEX_SELFPOWER_TRIPLE,
        INDEX_SELFPOWER_COMPRESSOR,
        INDEX_BUSPOWER_DIGITAL_ONLY,
        INDEX_BUSPOWER_ANALOG_ONLY,
        INDEX_BUSPOWER_DIF_ONLY,
        INDEX_BUSPOWER_EXTERNAL_ONLY,
        INDEX_BUSPOWER_EXTERNAL_ANALOG,
        INDEX_BUSPOWER_EXTERNAL_DIF,
        INDEX_BUSPOWER_EXTERNAL_DIGITAL,
        INDEX_BUSPOWER_DIGITAL_ANALOG,
        INDEX_BUSPOWER_DIGITAL_DIF,
        INDEX_BUSPOWER_DIGITAL_ANALOG_EXTERNAL,
        INDEX_BUSPOWER_DIGITAL_DIF_EXTERNAL,
};

/***************************************************************************/
struct cx231xx;

int initialize_cx231xx(struct cx231xx *p_dev);

#endif